From 354e57f3a0a26120af3bcd6c92c355ad00a057c1 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 7 Nov 2013 10:25:55 +0100 Subject: ARM/serial: at91: switch atmel serial to use gpiolib MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This passes the errata fix using a GPIO to control the RTS pin on one of the AT91 chips to use gpiolib instead of the AT91-specific interfaces. Also remove the reliance on compile-time #defines and the cpu_* check and rely on the platform passing down the proper GPIO pin through platform data. This is a prerequisite for getting rid of the local GPIO implementation in the AT91 platform and move toward multiplatform. The patch also adds device tree support for getting the RTS GPIO pin from the device tree on DT boot paths. Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Linus Walleij Acked-by: Greg Kroah-Hartman Signed-off-by: Uwe Kleine-König --- Documentation/devicetree/bindings/serial/atmel-usart.txt | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation/devicetree/bindings/serial') diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt index 2191dcb9f1da..3adc61c2e4ca 100644 --- a/Documentation/devicetree/bindings/serial/atmel-usart.txt +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -10,6 +10,8 @@ Required properties: Optional properties: - atmel,use-dma-rx: use of PDC or DMA for receiving data - atmel,use-dma-tx: use of PDC or DMA for transmitting data +- rts-gpios: specify a GPIO for RTS line. It will use specified PIO instead of the peripheral + function pin for the USART RTS feature. If unsure, don't specify this property. - add dma bindings for dma transfer: - dmas: DMA specifier, consisting of a phandle to DMA controller node, memory peripheral interface and USART DMA channel ID, FIFO configuration. @@ -28,6 +30,7 @@ Example: interrupts = <7>; atmel,use-dma-rx; atmel,use-dma-tx; + rts-gpios = <&pioD 15 0>; }; - use DMA: -- cgit v1.2.3