From 663148e48a661d759369b726261d160486b68e75 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Sun, 3 Jan 2016 16:26:04 +0100 Subject: Documentation: DT: net: add docs for ralink/mediatek SoC ethernet binding Add three files. ralink,rt2880-net.txt descibes the actual frame engine and the other two describe the switch forntend bindings. Signed-off-by: John Crispin Signed-off-by: Felix Fietkau Signed-off-by: Michael Lee Cc: devicetree@vger.kernel.org Cc: David S. Miller Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-mediatek@lists.infradead.org Cc: John Crispin Cc: Felix Fietkau Cc: Michael Lee Cc: steven.liu@mediatek.com Cc: Fred.Chang@mediatek.com Patchwork: https://patchwork.linux-mips.org/patch/11970/ Signed-off-by: Ralf Baechle --- .../devicetree/bindings/net/ralink,rt2880-net.txt | 61 ++++++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/ralink,rt2880-net.txt (limited to 'Documentation/devicetree/bindings/net/ralink,rt2880-net.txt') diff --git a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt new file mode 100644 index 000000000000..88b095d1f13b --- /dev/null +++ b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt @@ -0,0 +1,61 @@ +Ralink Frame Engine Ethernet controller +======================================= + +The Ralink frame engine ethernet controller can be found on Ralink and +Mediatek SoCs (RT288x, RT3x5x, RT366x, RT388x, rt5350, mt7620, mt7621, mt76x8). + +Depending on the SoC, there is a number of ports connected to the CPU port +directly and/or via a (gigabit-)switch. + +* Ethernet controller node + +Required properties: +- compatible: Should be one of "ralink,rt2880-eth", "ralink,rt3050-eth", + "ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth", + "mediatek,mt7620-eth", "mediatek,mt7621-eth" +- reg: Address and length of the register set for the device +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupts: Should contain the frame engines interrupt +- resets: Should contain the frame engines resets +- reset-names: Should contain the reset names "fe". If a switch is present + "esw" is also required. + + +* Ethernet port node + +Required properties: +- compatible: Should be "ralink,eth-port" +- reg: The number of the physical port +- phy-handle: reference to the node describing the phy + +Example: + +mdio-bus { + ... + phy0: ethernet-phy@0 { + phy-mode = "mii"; + reg = <0>; + }; +}; + +ethernet@400000 { + compatible = "ralink,rt2880-eth"; + reg = <0x00400000 10000>; + + #address-cells = <1>; + #size-cells = <0>; + + resets = <&rstctrl 18>; + reset-names = "fe"; + + interrupt-parent = <&cpuintc>; + interrupts = <5>; + + port@0 { + compatible = "ralink,eth-port"; + reg = <0>; + phy-handle = <&phy0>; + }; + +}; -- cgit v1.2.3