From 30f9f2fb7ba032665c8cea7694c815f18ed47a34 Mon Sep 17 00:00:00 2001
From: Dinh Nguyen <dinguyen@altera.com>
Date: Thu, 27 Sep 2012 10:58:06 -0600
Subject: mtd: denali: add a DT driver
Add a device tree version of the Denali NAND driver. Based
on an original patch from Jamie Iles to add a MMIO version
of this driver.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
---
.../devicetree/bindings/mtd/denali-nand.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/denali-nand.txt
(limited to 'Documentation/devicetree/bindings/mtd')
diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt
new file mode 100644
index 000000000000..b04d03a1d499
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt
@@ -0,0 +1,23 @@
+* Denali NAND controller
+
+Required properties:
+ - compatible : should be "denali,denali-nand-dt"
+ - reg : should contain registers location and length for data and reg.
+ - reg-names: Should contain the reg names "nand_data" and "denali_reg"
+ - interrupts : The interrupt number.
+ - dm-mask : DMA bit mask
+
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
+Examples:
+
+nand: nand@ff900000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "denali,denali-nand-dt";
+ reg = <0xff900000 0x100000>, <0xffb80000 0x10000>;
+ reg-names = "nand_data", "denali_reg";
+ interrupts = <0 144 4>;
+ dma-mask = <0xffffffff>;
+};
--
cgit v1.2.3