From fe8703cc0de67695e3385ba78b5dfb1091769d50 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Date: Mon, 7 May 2018 06:35:40 -0300
Subject: docs: admin-guide: add bcache documentation

The bcache.txt is already in ReST format. So, move it to the
admin guide, where it belongs.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
---
 Documentation/admin-guide/bcache.rst | 649 +++++++++++++++++++++++++++++++++++
 Documentation/admin-guide/index.rst  |   1 +
 2 files changed, 650 insertions(+)
 create mode 100644 Documentation/admin-guide/bcache.rst

(limited to 'Documentation/admin-guide')

diff --git a/Documentation/admin-guide/bcache.rst b/Documentation/admin-guide/bcache.rst
new file mode 100644
index 000000000000..c0ce64d75bbf
--- /dev/null
+++ b/Documentation/admin-guide/bcache.rst
@@ -0,0 +1,649 @@
+============================
+A block layer cache (bcache)
+============================
+
+Say you've got a big slow raid 6, and an ssd or three. Wouldn't it be
+nice if you could use them as cache... Hence bcache.
+
+Wiki and git repositories are at:
+
+  - http://bcache.evilpiepirate.org
+  - http://evilpiepirate.org/git/linux-bcache.git
+  - http://evilpiepirate.org/git/bcache-tools.git
+
+It's designed around the performance characteristics of SSDs - it only allocates
+in erase block sized buckets, and it uses a hybrid btree/log to track cached
+extents (which can be anywhere from a single sector to the bucket size). It's
+designed to avoid random writes at all costs; it fills up an erase block
+sequentially, then issues a discard before reusing it.
+
+Both writethrough and writeback caching are supported. Writeback defaults to
+off, but can be switched on and off arbitrarily at runtime. Bcache goes to
+great lengths to protect your data - it reliably handles unclean shutdown. (It
+doesn't even have a notion of a clean shutdown; bcache simply doesn't return
+writes as completed until they're on stable storage).
+
+Writeback caching can use most of the cache for buffering writes - writing
+dirty data to the backing device is always done sequentially, scanning from the
+start to the end of the index.
+
+Since random IO is what SSDs excel at, there generally won't be much benefit
+to caching large sequential IO. Bcache detects sequential IO and skips it;
+it also keeps a rolling average of the IO sizes per task, and as long as the
+average is above the cutoff it will skip all IO from that task - instead of
+caching the first 512k after every seek. Backups and large file copies should
+thus entirely bypass the cache.
+
+In the event of a data IO error on the flash it will try to recover by reading
+from disk or invalidating cache entries.  For unrecoverable errors (meta data
+or dirty data), caching is automatically disabled; if dirty data was present
+in the cache it first disables writeback caching and waits for all dirty data
+to be flushed.
+
+Getting started:
+You'll need make-bcache from the bcache-tools repository. Both the cache device
+and backing device must be formatted before use::
+
+  make-bcache -B /dev/sdb
+  make-bcache -C /dev/sdc
+
+make-bcache has the ability to format multiple devices at the same time - if
+you format your backing devices and cache device at the same time, you won't
+have to manually attach::
+
+  make-bcache -B /dev/sda /dev/sdb -C /dev/sdc
+
+bcache-tools now ships udev rules, and bcache devices are known to the kernel
+immediately.  Without udev, you can manually register devices like this::
+
+  echo /dev/sdb > /sys/fs/bcache/register
+  echo /dev/sdc > /sys/fs/bcache/register
+
+Registering the backing device makes the bcache device show up in /dev; you can
+now format it and use it as normal. But the first time using a new bcache
+device, it'll be running in passthrough mode until you attach it to a cache.
+If you are thinking about using bcache later, it is recommended to setup all your
+slow devices as bcache backing devices without a cache, and you can choose to add
+a caching device later.
+See 'ATTACHING' section below.
+
+The devices show up as::
+
+  /dev/bcache<N>
+
+As well as (with udev)::
+
+  /dev/bcache/by-uuid/<uuid>
+  /dev/bcache/by-label/<label>
+
+To get started::
+
+  mkfs.ext4 /dev/bcache0
+  mount /dev/bcache0 /mnt
+
+You can control bcache devices through sysfs at /sys/block/bcache<N>/bcache .
+You can also control them through /sys/fs//bcache/<cset-uuid>/ .
+
+Cache devices are managed as sets; multiple caches per set isn't supported yet
+but will allow for mirroring of metadata and dirty data in the future. Your new
+cache set shows up as /sys/fs/bcache/<UUID>
+
+Attaching
+---------
+
+After your cache device and backing device are registered, the backing device
+must be attached to your cache set to enable caching. Attaching a backing
+device to a cache set is done thusly, with the UUID of the cache set in
+/sys/fs/bcache::
+
+  echo <CSET-UUID> > /sys/block/bcache0/bcache/attach
+
+This only has to be done once. The next time you reboot, just reregister all
+your bcache devices. If a backing device has data in a cache somewhere, the
+/dev/bcache<N> device won't be created until the cache shows up - particularly
+important if you have writeback caching turned on.
+
+If you're booting up and your cache device is gone and never coming back, you
+can force run the backing device::
+
+  echo 1 > /sys/block/sdb/bcache/running
+
+(You need to use /sys/block/sdb (or whatever your backing device is called), not
+/sys/block/bcache0, because bcache0 doesn't exist yet. If you're using a
+partition, the bcache directory would be at /sys/block/sdb/sdb2/bcache)
+
+The backing device will still use that cache set if it shows up in the future,
+but all the cached data will be invalidated. If there was dirty data in the
+cache, don't expect the filesystem to be recoverable - you will have massive
+filesystem corruption, though ext4's fsck does work miracles.
+
+Error Handling
+--------------
+
+Bcache tries to transparently handle IO errors to/from the cache device without
+affecting normal operation; if it sees too many errors (the threshold is
+configurable, and defaults to 0) it shuts down the cache device and switches all
+the backing devices to passthrough mode.
+
+ - For reads from the cache, if they error we just retry the read from the
+   backing device.
+
+ - For writethrough writes, if the write to the cache errors we just switch to
+   invalidating the data at that lba in the cache (i.e. the same thing we do for
+   a write that bypasses the cache)
+
+ - For writeback writes, we currently pass that error back up to the
+   filesystem/userspace. This could be improved - we could retry it as a write
+   that skips the cache so we don't have to error the write.
+
+ - When we detach, we first try to flush any dirty data (if we were running in
+   writeback mode). It currently doesn't do anything intelligent if it fails to
+   read some of the dirty data, though.
+
+
+Howto/cookbook
+--------------
+
+A) Starting a bcache with a missing caching device
+
+If registering the backing device doesn't help, it's already there, you just need
+to force it to run without the cache::
+
+	host:~# echo /dev/sdb1 > /sys/fs/bcache/register
+	[  119.844831] bcache: register_bcache() error opening /dev/sdb1: device already registered
+
+Next, you try to register your caching device if it's present. However
+if it's absent, or registration fails for some reason, you can still
+start your bcache without its cache, like so::
+
+	host:/sys/block/sdb/sdb1/bcache# echo 1 > running
+
+Note that this may cause data loss if you were running in writeback mode.
+
+
+B) Bcache does not find its cache::
+
+	host:/sys/block/md5/bcache# echo 0226553a-37cf-41d5-b3ce-8b1e944543a8 > attach
+	[ 1933.455082] bcache: bch_cached_dev_attach() Couldn't find uuid for md5 in set
+	[ 1933.478179] bcache: __cached_dev_store() Can't attach 0226553a-37cf-41d5-b3ce-8b1e944543a8
+	[ 1933.478179] : cache set not found
+
+In this case, the caching device was simply not registered at boot
+or disappeared and came back, and needs to be (re-)registered::
+
+	host:/sys/block/md5/bcache# echo /dev/sdh2 > /sys/fs/bcache/register
+
+
+C) Corrupt bcache crashes the kernel at device registration time:
+
+This should never happen.  If it does happen, then you have found a bug!
+Please report it to the bcache development list: linux-bcache@vger.kernel.org
+
+Be sure to provide as much information that you can including kernel dmesg
+output if available so that we may assist.
+
+
+D) Recovering data without bcache:
+
+If bcache is not available in the kernel, a filesystem on the backing
+device is still available at an 8KiB offset. So either via a loopdev
+of the backing device created with --offset 8K, or any value defined by
+--data-offset when you originally formatted bcache with `make-bcache`.
+
+For example::
+
+	losetup -o 8192 /dev/loop0 /dev/your_bcache_backing_dev
+
+This should present your unmodified backing device data in /dev/loop0
+
+If your cache is in writethrough mode, then you can safely discard the
+cache device without loosing data.
+
+
+E) Wiping a cache device
+
+::
+
+	host:~# wipefs -a /dev/sdh2
+	16 bytes were erased at offset 0x1018 (bcache)
+	they were: c6 85 73 f6 4e 1a 45 ca 82 65 f5 7f 48 ba 6d 81
+
+After you boot back with bcache enabled, you recreate the cache and attach it::
+
+	host:~# make-bcache -C /dev/sdh2
+	UUID:                   7be7e175-8f4c-4f99-94b2-9c904d227045
+	Set UUID:               5bc072a8-ab17-446d-9744-e247949913c1
+	version:                0
+	nbuckets:               106874
+	block_size:             1
+	bucket_size:            1024
+	nr_in_set:              1
+	nr_this_dev:            0
+	first_bucket:           1
+	[  650.511912] bcache: run_cache_set() invalidating existing data
+	[  650.549228] bcache: register_cache() registered cache device sdh2
+
+start backing device with missing cache::
+
+	host:/sys/block/md5/bcache# echo 1 > running
+
+attach new cache::
+
+	host:/sys/block/md5/bcache# echo 5bc072a8-ab17-446d-9744-e247949913c1 > attach
+	[  865.276616] bcache: bch_cached_dev_attach() Caching md5 as bcache0 on set 5bc072a8-ab17-446d-9744-e247949913c1
+
+
+F) Remove or replace a caching device::
+
+	host:/sys/block/sda/sda7/bcache# echo 1 > detach
+	[  695.872542] bcache: cached_dev_detach_finish() Caching disabled for sda7
+
+	host:~# wipefs -a /dev/nvme0n1p4
+	wipefs: error: /dev/nvme0n1p4: probing initialization failed: Device or resource busy
+	Ooops, it's disabled, but not unregistered, so it's still protected
+
+We need to go and unregister it::
+
+	host:/sys/fs/bcache/b7ba27a1-2398-4649-8ae3-0959f57ba128# ls -l cache0
+	lrwxrwxrwx 1 root root 0 Feb 25 18:33 cache0 -> ../../../devices/pci0000:00/0000:00:1d.0/0000:70:00.0/nvme/nvme0/nvme0n1/nvme0n1p4/bcache/
+	host:/sys/fs/bcache/b7ba27a1-2398-4649-8ae3-0959f57ba128# echo 1 > stop
+	kernel: [  917.041908] bcache: cache_set_free() Cache set b7ba27a1-2398-4649-8ae3-0959f57ba128 unregistered
+
+Now we can wipe it::
+
+	host:~# wipefs -a /dev/nvme0n1p4
+	/dev/nvme0n1p4: 16 bytes were erased at offset 0x00001018 (bcache): c6 85 73 f6 4e 1a 45 ca 82 65 f5 7f 48 ba 6d 81
+
+
+G) dm-crypt and bcache
+
+First setup bcache unencrypted and then install dmcrypt on top of
+/dev/bcache<N> This will work faster than if you dmcrypt both the backing
+and caching devices and then install bcache on top. [benchmarks?]
+
+
+H) Stop/free a registered bcache to wipe and/or recreate it
+
+Suppose that you need to free up all bcache references so that you can
+fdisk run and re-register a changed partition table, which won't work
+if there are any active backing or caching devices left on it:
+
+1) Is it present in /dev/bcache* ? (there are times where it won't be)
+
+   If so, it's easy::
+
+	host:/sys/block/bcache0/bcache# echo 1 > stop
+
+2) But if your backing device is gone, this won't work::
+
+	host:/sys/block/bcache0# cd bcache
+	bash: cd: bcache: No such file or directory
+
+   In this case, you may have to unregister the dmcrypt block device that
+   references this bcache to free it up::
+
+	host:~# dmsetup remove oldds1
+	bcache: bcache_device_free() bcache0 stopped
+	bcache: cache_set_free() Cache set 5bc072a8-ab17-446d-9744-e247949913c1 unregistered
+
+   This causes the backing bcache to be removed from /sys/fs/bcache and
+   then it can be reused.  This would be true of any block device stacking
+   where bcache is a lower device.
+
+3) In other cases, you can also look in /sys/fs/bcache/::
+
+	host:/sys/fs/bcache# ls -l */{cache?,bdev?}
+	lrwxrwxrwx 1 root root 0 Mar  5 09:39 0226553a-37cf-41d5-b3ce-8b1e944543a8/bdev1 -> ../../../devices/virtual/block/dm-1/bcache/
+	lrwxrwxrwx 1 root root 0 Mar  5 09:39 0226553a-37cf-41d5-b3ce-8b1e944543a8/cache0 -> ../../../devices/virtual/block/dm-4/bcache/
+	lrwxrwxrwx 1 root root 0 Mar  5 09:39 5bc072a8-ab17-446d-9744-e247949913c1/cache0 -> ../../../devices/pci0000:00/0000:00:01.0/0000:01:00.0/ata10/host9/target9:0:0/9:0:0:0/block/sdl/sdl2/bcache/
+
+   The device names will show which UUID is relevant, cd in that directory
+   and stop the cache::
+
+	host:/sys/fs/bcache/5bc072a8-ab17-446d-9744-e247949913c1# echo 1 > stop
+
+   This will free up bcache references and let you reuse the partition for
+   other purposes.
+
+
+
+Troubleshooting performance
+---------------------------
+
+Bcache has a bunch of config options and tunables. The defaults are intended to
+be reasonable for typical desktop and server workloads, but they're not what you
+want for getting the best possible numbers when benchmarking.
+
+ - Backing device alignment
+
+   The default metadata size in bcache is 8k.  If your backing device is
+   RAID based, then be sure to align this by a multiple of your stride
+   width using `make-bcache --data-offset`. If you intend to expand your
+   disk array in the future, then multiply a series of primes by your
+   raid stripe size to get the disk multiples that you would like.
+
+   For example:  If you have a 64k stripe size, then the following offset
+   would provide alignment for many common RAID5 data spindle counts::
+
+	64k * 2*2*2*3*3*5*7 bytes = 161280k
+
+   That space is wasted, but for only 157.5MB you can grow your RAID 5
+   volume to the following data-spindle counts without re-aligning::
+
+	3,4,5,6,7,8,9,10,12,14,15,18,20,21 ...
+
+ - Bad write performance
+
+   If write performance is not what you expected, you probably wanted to be
+   running in writeback mode, which isn't the default (not due to a lack of
+   maturity, but simply because in writeback mode you'll lose data if something
+   happens to your SSD)::
+
+	# echo writeback > /sys/block/bcache0/bcache/cache_mode
+
+ - Bad performance, or traffic not going to the SSD that you'd expect
+
+   By default, bcache doesn't cache everything. It tries to skip sequential IO -
+   because you really want to be caching the random IO, and if you copy a 10
+   gigabyte file you probably don't want that pushing 10 gigabytes of randomly
+   accessed data out of your cache.
+
+   But if you want to benchmark reads from cache, and you start out with fio
+   writing an 8 gigabyte test file - so you want to disable that::
+
+	# echo 0 > /sys/block/bcache0/bcache/sequential_cutoff
+
+   To set it back to the default (4 mb), do::
+
+	# echo 4M > /sys/block/bcache0/bcache/sequential_cutoff
+
+ - Traffic's still going to the spindle/still getting cache misses
+
+   In the real world, SSDs don't always keep up with disks - particularly with
+   slower SSDs, many disks being cached by one SSD, or mostly sequential IO. So
+   you want to avoid being bottlenecked by the SSD and having it slow everything
+   down.
+
+   To avoid that bcache tracks latency to the cache device, and gradually
+   throttles traffic if the latency exceeds a threshold (it does this by
+   cranking down the sequential bypass).
+
+   You can disable this if you need to by setting the thresholds to 0::
+
+	# echo 0 > /sys/fs/bcache/<cache set>/congested_read_threshold_us
+	# echo 0 > /sys/fs/bcache/<cache set>/congested_write_threshold_us
+
+   The default is 2000 us (2 milliseconds) for reads, and 20000 for writes.
+
+ - Still getting cache misses, of the same data
+
+   One last issue that sometimes trips people up is actually an old bug, due to
+   the way cache coherency is handled for cache misses. If a btree node is full,
+   a cache miss won't be able to insert a key for the new data and the data
+   won't be written to the cache.
+
+   In practice this isn't an issue because as soon as a write comes along it'll
+   cause the btree node to be split, and you need almost no write traffic for
+   this to not show up enough to be noticeable (especially since bcache's btree
+   nodes are huge and index large regions of the device). But when you're
+   benchmarking, if you're trying to warm the cache by reading a bunch of data
+   and there's no other traffic - that can be a problem.
+
+   Solution: warm the cache by doing writes, or use the testing branch (there's
+   a fix for the issue there).
+
+
+Sysfs - backing device
+----------------------
+
+Available at /sys/block/<bdev>/bcache, /sys/block/bcache*/bcache and
+(if attached) /sys/fs/bcache/<cset-uuid>/bdev*
+
+attach
+  Echo the UUID of a cache set to this file to enable caching.
+
+cache_mode
+  Can be one of either writethrough, writeback, writearound or none.
+
+clear_stats
+  Writing to this file resets the running total stats (not the day/hour/5 minute
+  decaying versions).
+
+detach
+  Write to this file to detach from a cache set. If there is dirty data in the
+  cache, it will be flushed first.
+
+dirty_data
+  Amount of dirty data for this backing device in the cache. Continuously
+  updated unlike the cache set's version, but may be slightly off.
+
+label
+  Name of underlying device.
+
+readahead
+  Size of readahead that should be performed.  Defaults to 0.  If set to e.g.
+  1M, it will round cache miss reads up to that size, but without overlapping
+  existing cache entries.
+
+running
+  1 if bcache is running (i.e. whether the /dev/bcache device exists, whether
+  it's in passthrough mode or caching).
+
+sequential_cutoff
+  A sequential IO will bypass the cache once it passes this threshold; the
+  most recent 128 IOs are tracked so sequential IO can be detected even when
+  it isn't all done at once.
+
+sequential_merge
+  If non zero, bcache keeps a list of the last 128 requests submitted to compare
+  against all new requests to determine which new requests are sequential
+  continuations of previous requests for the purpose of determining sequential
+  cutoff. This is necessary if the sequential cutoff value is greater than the
+  maximum acceptable sequential size for any single request.
+
+state
+  The backing device can be in one of four different states:
+
+  no cache: Has never been attached to a cache set.
+
+  clean: Part of a cache set, and there is no cached dirty data.
+
+  dirty: Part of a cache set, and there is cached dirty data.
+
+  inconsistent: The backing device was forcibly run by the user when there was
+  dirty data cached but the cache set was unavailable; whatever data was on the
+  backing device has likely been corrupted.
+
+stop
+  Write to this file to shut down the bcache device and close the backing
+  device.
+
+writeback_delay
+  When dirty data is written to the cache and it previously did not contain
+  any, waits some number of seconds before initiating writeback. Defaults to
+  30.
+
+writeback_percent
+  If nonzero, bcache tries to keep around this percentage of the cache dirty by
+  throttling background writeback and using a PD controller to smoothly adjust
+  the rate.
+
+writeback_rate
+  Rate in sectors per second - if writeback_percent is nonzero, background
+  writeback is throttled to this rate. Continuously adjusted by bcache but may
+  also be set by the user.
+
+writeback_running
+  If off, writeback of dirty data will not take place at all. Dirty data will
+  still be added to the cache until it is mostly full; only meant for
+  benchmarking. Defaults to on.
+
+Sysfs - backing device stats
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+There are directories with these numbers for a running total, as well as
+versions that decay over the past day, hour and 5 minutes; they're also
+aggregated in the cache set directory as well.
+
+bypassed
+  Amount of IO (both reads and writes) that has bypassed the cache
+
+cache_hits, cache_misses, cache_hit_ratio
+  Hits and misses are counted per individual IO as bcache sees them; a
+  partial hit is counted as a miss.
+
+cache_bypass_hits, cache_bypass_misses
+  Hits and misses for IO that is intended to skip the cache are still counted,
+  but broken out here.
+
+cache_miss_collisions
+  Counts instances where data was going to be inserted into the cache from a
+  cache miss, but raced with a write and data was already present (usually 0
+  since the synchronization for cache misses was rewritten)
+
+cache_readaheads
+  Count of times readahead occurred.
+
+Sysfs - cache set
+~~~~~~~~~~~~~~~~~
+
+Available at /sys/fs/bcache/<cset-uuid>
+
+average_key_size
+  Average data per key in the btree.
+
+bdev<0..n>
+  Symlink to each of the attached backing devices.
+
+block_size
+  Block size of the cache devices.
+
+btree_cache_size
+  Amount of memory currently used by the btree cache
+
+bucket_size
+  Size of buckets
+
+cache<0..n>
+  Symlink to each of the cache devices comprising this cache set.
+
+cache_available_percent
+  Percentage of cache device which doesn't contain dirty data, and could
+  potentially be used for writeback.  This doesn't mean this space isn't used
+  for clean cached data; the unused statistic (in priority_stats) is typically
+  much lower.
+
+clear_stats
+  Clears the statistics associated with this cache
+
+dirty_data
+  Amount of dirty data is in the cache (updated when garbage collection runs).
+
+flash_vol_create
+  Echoing a size to this file (in human readable units, k/M/G) creates a thinly
+  provisioned volume backed by the cache set.
+
+io_error_halflife, io_error_limit
+  These determines how many errors we accept before disabling the cache.
+  Each error is decayed by the half life (in # ios).  If the decaying count
+  reaches io_error_limit dirty data is written out and the cache is disabled.
+
+journal_delay_ms
+  Journal writes will delay for up to this many milliseconds, unless a cache
+  flush happens sooner. Defaults to 100.
+
+root_usage_percent
+  Percentage of the root btree node in use.  If this gets too high the node
+  will split, increasing the tree depth.
+
+stop
+  Write to this file to shut down the cache set - waits until all attached
+  backing devices have been shut down.
+
+tree_depth
+  Depth of the btree (A single node btree has depth 0).
+
+unregister
+  Detaches all backing devices and closes the cache devices; if dirty data is
+  present it will disable writeback caching and wait for it to be flushed.
+
+Sysfs - cache set internal
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This directory also exposes timings for a number of internal operations, with
+separate files for average duration, average frequency, last occurrence and max
+duration: garbage collection, btree read, btree node sorts and btree splits.
+
+active_journal_entries
+  Number of journal entries that are newer than the index.
+
+btree_nodes
+  Total nodes in the btree.
+
+btree_used_percent
+  Average fraction of btree in use.
+
+bset_tree_stats
+  Statistics about the auxiliary search trees
+
+btree_cache_max_chain
+  Longest chain in the btree node cache's hash table
+
+cache_read_races
+  Counts instances where while data was being read from the cache, the bucket
+  was reused and invalidated - i.e. where the pointer was stale after the read
+  completed. When this occurs the data is reread from the backing device.
+
+trigger_gc
+  Writing to this file forces garbage collection to run.
+
+Sysfs - Cache device
+~~~~~~~~~~~~~~~~~~~~
+
+Available at /sys/block/<cdev>/bcache
+
+block_size
+  Minimum granularity of writes - should match hardware sector size.
+
+btree_written
+  Sum of all btree writes, in (kilo/mega/giga) bytes
+
+bucket_size
+  Size of buckets
+
+cache_replacement_policy
+  One of either lru, fifo or random.
+
+discard
+  Boolean; if on a discard/TRIM will be issued to each bucket before it is
+  reused. Defaults to off, since SATA TRIM is an unqueued command (and thus
+  slow).
+
+freelist_percent
+  Size of the freelist as a percentage of nbuckets. Can be written to to
+  increase the number of buckets kept on the freelist, which lets you
+  artificially reduce the size of the cache at runtime. Mostly for testing
+  purposes (i.e. testing how different size caches affect your hit rate), but
+  since buckets are discarded when they move on to the freelist will also make
+  the SSD's garbage collection easier by effectively giving it more reserved
+  space.
+
+io_errors
+  Number of errors that have occurred, decayed by io_error_halflife.
+
+metadata_written
+  Sum of all non data writes (btree writes and all other metadata).
+
+nbuckets
+  Total buckets in this cache
+
+priority_stats
+  Statistics about how recently data in the cache has been accessed.
+  This can reveal your working set size.  Unused is the percentage of
+  the cache that doesn't contain any data.  Metadata is bcache's
+  metadata overhead.  Average is the average priority of cache buckets.
+  Next is a list of quantiles with the priority threshold of each.
+
+written
+  Sum of all data that has been written to the cache; comparison with
+  btree_written gives the amount of write inflation in bcache.
diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst
index cac906fb0ed0..52eb3408f9a0 100644
--- a/Documentation/admin-guide/index.rst
+++ b/Documentation/admin-guide/index.rst
@@ -60,6 +60,7 @@ configure specific aspects of kernel behavior to your liking.
    mono
    java
    ras
+   bcache
    pm/index
    thunderbolt
    LSM/index
-- 
cgit v1.2.3