From 35f739679a18d7a9680960c9cfc472ef012682dd Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sat, 26 Dec 2015 21:17:22 +0900 Subject: iio: dac: mcp4725: Add basic support for MCP4726 MCP4726 is a single channel 12-bit DAC. We can support MCP4726 with a little changes to mcp4725 driver. In power-down mode, they have different selection of VOUT pull-down registers. MCP4726 also has features: - Output gain options: 1x, 2x - Voltage reference selection: VDD, VREF (Unbuffered or Buffered) But these are not supported in this change. (1x gain, VDD is selected) datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/22272C.pdf Signed-off-by: Akinobu Mita Cc: Jonathan Cameron Cc: Hartmut Knaack Cc: Lars-Peter Clausen Cc: Peter Meerwald Cc: linux-iio@vger.kernel.org Signed-off-by: Jonathan Cameron --- Documentation/ABI/testing/sysfs-bus-iio | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/ABI') diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 0439c2aaf741..8fadd272ad8a 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -497,7 +497,9 @@ Description: 6kohm_to_gnd: connected to ground via a 6kOhm resistor, 20kohm_to_gnd: connected to ground via a 20kOhm resistor, 100kohm_to_gnd: connected to ground via an 100kOhm resistor, + 125kohm_to_gnd: connected to ground via an 125kOhm resistor, 500kohm_to_gnd: connected to ground via a 500kOhm resistor, + 640kohm_to_gnd: connected to ground via a 640kOhm resistor, three_state: left floating. For a list of available output power down options read outX_powerdown_mode_available. If Y is not present the -- cgit v1.2.3