From 3d3522604a5557e80fdcab61c54bd04eaf15b525 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Tue, 19 Feb 2013 22:44:57 +0100 Subject: spi/atmel: fix speed_hz check in atmel_spi_transfer() atmel_spi_transfer() would check speed_hz and fail if the speed was changed in the transfer. After commit "spi: make sure all transfer has proper speed set" this would happen on all transfers. Change speed_hz check to only fail if a lower speed than max is requested. Signed-off-by: Joachim Eastwood Acked-by: Nicolas Ferre Signed-off-by: Grant Likely --- drivers/spi/spi-atmel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 656d137db253..80f5867c088b 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -847,8 +847,8 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) } /* FIXME implement these protocol options!! */ - if (xfer->speed_hz) { - dev_dbg(&spi->dev, "no protocol options yet\n"); + if (xfer->speed_hz < spi->max_speed_hz) { + dev_dbg(&spi->dev, "can't change speed in transfer\n"); return -ENOPROTOOPT; } -- cgit v1.2.3 From 446411e18b2cb17d153e45f634a3c9a79ada3ac2 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Wed, 13 Feb 2013 14:20:25 +0100 Subject: spi: Initialize cs_gpio and cs_gpios with -ENOENT The return value from of_get_named_gpio is -ENOENT when the given index matches a hole in the "cs-gpios" property phandle list. However, the default value of cs_gpio in struct spi_device and entries of cs_gpios in struct spi_master is -EINVAL, which is documented to indicate that a GPIO line should not be used for the given spi_device. This sets the default value of cs_gpio in struct spi_device and entries of cs_gpios in struct spi_master to -ENOENT. Thus, -ENOENT is the only value used to indicate that no GPIO line should be used. Signed-off-by: Andreas Larsson Signed-off-by: Grant Likely --- drivers/spi/spi.c | 4 ++-- include/linux/spi/spi.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 004b10f184d4..bcca66c5107f 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -334,7 +334,7 @@ struct spi_device *spi_alloc_device(struct spi_master *master) spi->dev.parent = &master->dev; spi->dev.bus = &spi_bus_type; spi->dev.release = spidev_release; - spi->cs_gpio = -EINVAL; + spi->cs_gpio = -ENOENT; device_initialize(&spi->dev); return spi; } @@ -1079,7 +1079,7 @@ static int of_spi_register_master(struct spi_master *master) return -ENOMEM; for (i = 0; i < master->num_chipselect; i++) - cs[i] = -EINVAL; + cs[i] = -ENOENT; for (i = 0; i < nb; i++) cs[i] = of_get_named_gpio(np, "cs-gpios", i); diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 38c2b925923d..c395f32b53b3 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -57,7 +57,7 @@ extern struct bus_type spi_bus_type; * @modalias: Name of the driver to use with this device, or an alias * for that name. This appears in the sysfs "modalias" attribute * for driver coldplugging, and in uevents used for hotplugging - * @cs_gpio: gpio number of the chipselect line (optional, -EINVAL when + * @cs_gpio: gpio number of the chipselect line (optional, -ENOENT when * when not using a GPIO line) * * A @spi_device is used to interchange data between an SPI slave @@ -261,7 +261,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * queue so the subsystem notifies the driver that it may relax the * hardware by issuing this call * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS - * number. Any individual value may be -EINVAL for CS lines that + * number. Any individual value may be -ENOENT for CS lines that * are not GPIOs (driven by the SPI controller itself). * * Each SPI master controller can communicate with one or more @spi_device -- cgit v1.2.3 From 8ec5d84ef51cc64ed02bb9bf0e43a652178252c1 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Wed, 13 Feb 2013 14:23:24 +0100 Subject: spi: Return error from of_spi_register_master on bad "cs-gpios" property This makes sure that an error is returned on an incorrectly formed "cs-gpios" property, but reports success when the "cs-gpios" property is well formed or missing. When holes in the cs-gpios property phandle list is used to indicate that some other form of chipselect is to be used it is important that failure to read a broken "cs-gpios" property does not silently fail leading to the spi controller to use an unintended chipselect. Signed-off-by: Andreas Larsson Signed-off-by: Grant Likely --- drivers/spi/spi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index bcca66c5107f..3738e7cbff33 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1067,8 +1067,11 @@ static int of_spi_register_master(struct spi_master *master) nb = of_gpio_named_count(np, "cs-gpios"); master->num_chipselect = max(nb, (int)master->num_chipselect); - if (nb < 1) + /* Return error only for an incorrectly formed cs-gpios property */ + if (nb == 0 || nb == -ENOENT) return 0; + else if (nb < 0) + return nb; cs = devm_kzalloc(&master->dev, sizeof(int) * master->num_chipselect, -- cgit v1.2.3 From 0d2d0cc5216db678070efc911ef47f4cb53b4aad Mon Sep 17 00:00:00 2001 From: "Manjunathappa, Prakash" Date: Mon, 25 Feb 2013 16:14:07 +0530 Subject: spi/davinci: fix module build error Fix below module build error: CC [M] drivers/spi/spi-davinci.o drivers/spi/spi-davinci.c:774:1: error: '__mod_of_device_table' aliased to undefined symbol 'davini_spi_of_match' drivers/spi/spi-davinci.c:774:1: error: '__mod_of_device_table' aliased to undefined symbol 'davini_spi_of_match' make[2]: *** [drivers/spi/spi-davinci.o] Error 1 make[1]: *** [drivers/spi] Error 2 make[1]: *** Waiting for unfinished jobs.... make: *** [drivers] Error 2 Signed-off-by: Manjunathappa, Prakash Acked-by: Sekhar Nori Signed-off-by: Grant Likely --- drivers/spi/spi-davinci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index 8234d2259722..6287c8315d0d 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -784,7 +784,7 @@ static const struct of_device_id davinci_spi_of_match[] = { }, { }, }; -MODULE_DEVICE_TABLE(of, davini_spi_of_match); +MODULE_DEVICE_TABLE(of, davinci_spi_of_match); /** * spi_davinci_get_pdata - Get platform data from DTS binding -- cgit v1.2.3 From d450f445f9a654080a6be4094376c2192d9a1f36 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 19 Feb 2013 02:58:25 +0300 Subject: : fix compilation warnings with DT disabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following compilation warnings (in Simon Horman's renesas.git repo): In file included from arch/arm/mach-shmobile/setup-r8a7779.c:24:0: include/linux/of_platform.h:107:13: warning: ‘struct of_device_id’ declared inside parameter list [enabled by default] include/linux/of_platform.h:107:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] include/linux/of_platform.h:107:13: warning: ‘struct device_node’ declared inside parameter list [enabled by default] only #include's headers with definitions of the above mentioned structures if CONFIG_OF_DEVICE=y but uses them even if not. One solution is to move some #include's out of #ifdef CONFIG_OF_DEVICE and use incomplete declarations for the rest of the structures where the #ifdef move doesn't help... Reported-by: Vladimir Barinov Signed-off-by: Sergei Shtylyov Signed-off-by: Rob Herring --- include/linux/of_platform.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h index 3863a4dbdf18..2a93b64a3869 100644 --- a/include/linux/of_platform.h +++ b/include/linux/of_platform.h @@ -11,9 +11,10 @@ * */ -#ifdef CONFIG_OF_DEVICE #include #include + +#ifdef CONFIG_OF_DEVICE #include #include #include @@ -100,7 +101,7 @@ extern int of_platform_populate(struct device_node *root, #if !defined(CONFIG_OF_ADDRESS) struct of_dev_auxdata; -struct device; +struct device_node; static inline int of_platform_populate(struct device_node *root, const struct of_device_id *matches, const struct of_dev_auxdata *lookup, -- cgit v1.2.3 From 48d045dbe9c757681edfe8274211254c56d53a41 Mon Sep 17 00:00:00 2001 From: Rahul Sharma Date: Wed, 6 Feb 2013 09:51:39 -0500 Subject: of/documentation: move video device bindings to a common place Binding Documents for drm-devices are placed in Documentation/devicetree/bindings/drm/*. But these devices are common for v4l framework, hence moved to a common place at Documentation/devicetree/bindings/video/. 'exynos_' prefix is added to associate them with exynos soc series. Signed-off-by: Rahul Sharma Signed-off-by: Grant Likely --- .../devicetree/bindings/drm/exynos/hdmi.txt | 22 ---------------------- .../devicetree/bindings/drm/exynos/hdmiddc.txt | 12 ------------ .../devicetree/bindings/drm/exynos/hdmiphy.txt | 12 ------------ .../devicetree/bindings/drm/exynos/mixer.txt | 15 --------------- .../devicetree/bindings/video/exynos_hdmi.txt | 22 ++++++++++++++++++++++ .../devicetree/bindings/video/exynos_hdmiddc.txt | 12 ++++++++++++ .../devicetree/bindings/video/exynos_hdmiphy.txt | 12 ++++++++++++ .../devicetree/bindings/video/exynos_mixer.txt | 15 +++++++++++++++ 8 files changed, 61 insertions(+), 61 deletions(-) delete mode 100644 Documentation/devicetree/bindings/drm/exynos/hdmi.txt delete mode 100644 Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt delete mode 100644 Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt delete mode 100644 Documentation/devicetree/bindings/drm/exynos/mixer.txt create mode 100644 Documentation/devicetree/bindings/video/exynos_hdmi.txt create mode 100644 Documentation/devicetree/bindings/video/exynos_hdmiddc.txt create mode 100644 Documentation/devicetree/bindings/video/exynos_hdmiphy.txt create mode 100644 Documentation/devicetree/bindings/video/exynos_mixer.txt diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmi.txt b/Documentation/devicetree/bindings/drm/exynos/hdmi.txt deleted file mode 100644 index 589edee37394..000000000000 --- a/Documentation/devicetree/bindings/drm/exynos/hdmi.txt +++ /dev/null @@ -1,22 +0,0 @@ -Device-Tree bindings for drm hdmi driver - -Required properties: -- compatible: value should be "samsung,exynos5-hdmi". -- reg: physical base address of the hdmi and length of memory mapped - region. -- interrupts: interrupt number to the cpu. -- hpd-gpio: following information about the hotplug gpio pin. - a) phandle of the gpio controller node. - b) pin number within the gpio controller. - c) pin function mode. - d) optional flags and pull up/down. - e) drive strength. - -Example: - - hdmi { - compatible = "samsung,exynos5-hdmi"; - reg = <0x14530000 0x100000>; - interrupts = <0 95 0>; - hpd-gpio = <&gpx3 7 0xf 1 3>; - }; diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt b/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt deleted file mode 100644 index fa166d945809..000000000000 --- a/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt +++ /dev/null @@ -1,12 +0,0 @@ -Device-Tree bindings for hdmiddc driver - -Required properties: -- compatible: value should be "samsung,exynos5-hdmiddc". -- reg: I2C address of the hdmiddc device. - -Example: - - hdmiddc { - compatible = "samsung,exynos5-hdmiddc"; - reg = <0x50>; - }; diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt b/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt deleted file mode 100644 index 858f4f9b902f..000000000000 --- a/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt +++ /dev/null @@ -1,12 +0,0 @@ -Device-Tree bindings for hdmiphy driver - -Required properties: -- compatible: value should be "samsung,exynos5-hdmiphy". -- reg: I2C address of the hdmiphy device. - -Example: - - hdmiphy { - compatible = "samsung,exynos5-hdmiphy"; - reg = <0x38>; - }; diff --git a/Documentation/devicetree/bindings/drm/exynos/mixer.txt b/Documentation/devicetree/bindings/drm/exynos/mixer.txt deleted file mode 100644 index 9b2ea0343566..000000000000 --- a/Documentation/devicetree/bindings/drm/exynos/mixer.txt +++ /dev/null @@ -1,15 +0,0 @@ -Device-Tree bindings for mixer driver - -Required properties: -- compatible: value should be "samsung,exynos5-mixer". -- reg: physical base address of the mixer and length of memory mapped - region. -- interrupts: interrupt number to the cpu. - -Example: - - mixer { - compatible = "samsung,exynos5-mixer"; - reg = <0x14450000 0x10000>; - interrupts = <0 94 0>; - }; diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt new file mode 100644 index 000000000000..589edee37394 --- /dev/null +++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt @@ -0,0 +1,22 @@ +Device-Tree bindings for drm hdmi driver + +Required properties: +- compatible: value should be "samsung,exynos5-hdmi". +- reg: physical base address of the hdmi and length of memory mapped + region. +- interrupts: interrupt number to the cpu. +- hpd-gpio: following information about the hotplug gpio pin. + a) phandle of the gpio controller node. + b) pin number within the gpio controller. + c) pin function mode. + d) optional flags and pull up/down. + e) drive strength. + +Example: + + hdmi { + compatible = "samsung,exynos5-hdmi"; + reg = <0x14530000 0x100000>; + interrupts = <0 95 0>; + hpd-gpio = <&gpx3 7 0xf 1 3>; + }; diff --git a/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt b/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt new file mode 100644 index 000000000000..fa166d945809 --- /dev/null +++ b/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt @@ -0,0 +1,12 @@ +Device-Tree bindings for hdmiddc driver + +Required properties: +- compatible: value should be "samsung,exynos5-hdmiddc". +- reg: I2C address of the hdmiddc device. + +Example: + + hdmiddc { + compatible = "samsung,exynos5-hdmiddc"; + reg = <0x50>; + }; diff --git a/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt new file mode 100644 index 000000000000..858f4f9b902f --- /dev/null +++ b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt @@ -0,0 +1,12 @@ +Device-Tree bindings for hdmiphy driver + +Required properties: +- compatible: value should be "samsung,exynos5-hdmiphy". +- reg: I2C address of the hdmiphy device. + +Example: + + hdmiphy { + compatible = "samsung,exynos5-hdmiphy"; + reg = <0x38>; + }; diff --git a/Documentation/devicetree/bindings/video/exynos_mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt new file mode 100644 index 000000000000..9b2ea0343566 --- /dev/null +++ b/Documentation/devicetree/bindings/video/exynos_mixer.txt @@ -0,0 +1,15 @@ +Device-Tree bindings for mixer driver + +Required properties: +- compatible: value should be "samsung,exynos5-mixer". +- reg: physical base address of the mixer and length of memory mapped + region. +- interrupts: interrupt number to the cpu. + +Example: + + mixer { + compatible = "samsung,exynos5-mixer"; + reg = <0x14450000 0x10000>; + interrupts = <0 94 0>; + }; -- cgit v1.2.3 From b855f16b05a697ac1863adabe99bfba56e6d3199 Mon Sep 17 00:00:00 2001 From: Tang Yuantian Date: Wed, 10 Apr 2013 11:36:39 +0800 Subject: of/base: release the node correctly in of_parse_phandle_with_args() Call of_node_put() only when the out_args is NULL on success, or the node's reference count will not be correct because the caller will call of_node_put() again. Signed-off-by: Tang Yuantian [grant.likely: tightened up the patch] Signed-off-by: Grant Likely --- drivers/of/base.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/of/base.c b/drivers/of/base.c index 321d3ef05006..e77e71989e81 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -1166,11 +1166,11 @@ static int __of_parse_phandle_with_args(const struct device_node *np, out_args->args_count = count; for (i = 0; i < count; i++) out_args->args[i] = be32_to_cpup(list++); + } else { + of_node_put(node); } /* Found it! return success */ - if (node) - of_node_put(node); return 0; } -- cgit v1.2.3 From a2b9ea73967386ec5e524ab206bd549d5aafea17 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 25 Apr 2013 14:27:57 +0200 Subject: Documentation/devicetree: make semantic of initrd-end more explicit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Rob Herring --- Documentation/devicetree/usage-model.txt | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/usage-model.txt b/Documentation/devicetree/usage-model.txt index ef9d06c9f8fd..0efedaad5165 100644 --- a/Documentation/devicetree/usage-model.txt +++ b/Documentation/devicetree/usage-model.txt @@ -191,9 +191,11 @@ Linux it will look something like this: }; The bootargs property contains the kernel arguments, and the initrd-* -properties define the address and size of an initrd blob. The -chosen node may also optionally contain an arbitrary number of -additional properties for platform-specific configuration data. +properties define the address and size of an initrd blob. Note that +initrd-end is the first address after the initrd image, so this doesn't +match the usual semantic of struct resource. The chosen node may also +optionally contain an arbitrary number of additional properties for +platform-specific configuration data. During early boot, the architecture setup code calls of_scan_flat_dt() several times with different helper callbacks to parse device tree -- cgit v1.2.3 From 49717cb40410fe4b563968680ff7c513967504c6 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Thu, 11 Apr 2013 08:07:11 -0700 Subject: kthread: Document ways of reducing OS jitter due to per-CPU kthreads The Linux kernel uses a number of per-CPU kthreads, any of which might contribute to OS jitter at any time. The usual approach to normal kthreads, namely to bind them to a "housekeeping" CPU, does not work with these kthreads because they cannot operate correctly if moved to some other CPU. This commit therefore lists ways of controlling OS jitter from the Linux kernel's per-CPU kthreads. It also lists some ways of diagnosing excessive jitter. Signed-off-by: Paul E. McKenney Cc: Frederic Weisbecker Cc: Steven Rostedt Cc: Borislav Petkov Cc: Arjan van de Ven Cc: Kevin Hilman Cc: Christoph Lameter Cc: Thomas Gleixner Cc: Olivier Baetz Cc: Pradeep Satyanarayana Reviewed-by: Randy Dunlap Reviewed-by: Borislav Petkov --- Documentation/kernel-per-CPU-kthreads.txt | 202 ++++++++++++++++++++++++++++++ 1 file changed, 202 insertions(+) create mode 100644 Documentation/kernel-per-CPU-kthreads.txt diff --git a/Documentation/kernel-per-CPU-kthreads.txt b/Documentation/kernel-per-CPU-kthreads.txt new file mode 100644 index 000000000000..cbf7ae412da4 --- /dev/null +++ b/Documentation/kernel-per-CPU-kthreads.txt @@ -0,0 +1,202 @@ +REDUCING OS JITTER DUE TO PER-CPU KTHREADS + +This document lists per-CPU kthreads in the Linux kernel and presents +options to control their OS jitter. Note that non-per-CPU kthreads are +not listed here. To reduce OS jitter from non-per-CPU kthreads, bind +them to a "housekeeping" CPU dedicated to such work. + + +REFERENCES + +o Documentation/IRQ-affinity.txt: Binding interrupts to sets of CPUs. + +o Documentation/cgroups: Using cgroups to bind tasks to sets of CPUs. + +o man taskset: Using the taskset command to bind tasks to sets + of CPUs. + +o man sched_setaffinity: Using the sched_setaffinity() system + call to bind tasks to sets of CPUs. + +o /sys/devices/system/cpu/cpuN/online: Control CPU N's hotplug state, + writing "0" to offline and "1" to online. + +o In order to locate kernel-generated OS jitter on CPU N: + + cd /sys/kernel/debug/tracing + echo 1 > max_graph_depth # Increase the "1" for more detail + echo function_graph > current_tracer + # run workload + cat per_cpu/cpuN/trace + + +KTHREADS + +Name: ehca_comp/%u +Purpose: Periodically process Infiniband-related work. +To reduce its OS jitter, do any of the following: +1. Don't use eHCA Infiniband hardware, instead choosing hardware + that does not require per-CPU kthreads. This will prevent these + kthreads from being created in the first place. (This will + work for most people, as this hardware, though important, is + relatively old and is produced in relatively low unit volumes.) +2. Do all eHCA-Infiniband-related work on other CPUs, including + interrupts. +3. Rework the eHCA driver so that its per-CPU kthreads are + provisioned only on selected CPUs. + + +Name: irq/%d-%s +Purpose: Handle threaded interrupts. +To reduce its OS jitter, do the following: +1. Use irq affinity to force the irq threads to execute on + some other CPU. + +Name: kcmtpd_ctr_%d +Purpose: Handle Bluetooth work. +To reduce its OS jitter, do one of the following: +1. Don't use Bluetooth, in which case these kthreads won't be + created in the first place. +2. Use irq affinity to force Bluetooth-related interrupts to + occur on some other CPU and furthermore initiate all + Bluetooth activity on some other CPU. + +Name: ksoftirqd/%u +Purpose: Execute softirq handlers when threaded or when under heavy load. +To reduce its OS jitter, each softirq vector must be handled +separately as follows: +TIMER_SOFTIRQ: Do all of the following: +1. To the extent possible, keep the CPU out of the kernel when it + is non-idle, for example, by avoiding system calls and by forcing + both kernel threads and interrupts to execute elsewhere. +2. Build with CONFIG_HOTPLUG_CPU=y. After boot completes, force + the CPU offline, then bring it back online. This forces + recurring timers to migrate elsewhere. If you are concerned + with multiple CPUs, force them all offline before bringing the + first one back online. Once you have onlined the CPUs in question, + do not offline any other CPUs, because doing so could force the + timer back onto one of the CPUs in question. +NET_TX_SOFTIRQ and NET_RX_SOFTIRQ: Do all of the following: +1. Force networking interrupts onto other CPUs. +2. Initiate any network I/O on other CPUs. +3. Once your application has started, prevent CPU-hotplug operations + from being initiated from tasks that might run on the CPU to + be de-jittered. (It is OK to force this CPU offline and then + bring it back online before you start your application.) +BLOCK_SOFTIRQ: Do all of the following: +1. Force block-device interrupts onto some other CPU. +2. Initiate any block I/O on other CPUs. +3. Once your application has started, prevent CPU-hotplug operations + from being initiated from tasks that might run on the CPU to + be de-jittered. (It is OK to force this CPU offline and then + bring it back online before you start your application.) +BLOCK_IOPOLL_SOFTIRQ: Do all of the following: +1. Force block-device interrupts onto some other CPU. +2. Initiate any block I/O and block-I/O polling on other CPUs. +3. Once your application has started, prevent CPU-hotplug operations + from being initiated from tasks that might run on the CPU to + be de-jittered. (It is OK to force this CPU offline and then + bring it back online before you start your application.) +TASKLET_SOFTIRQ: Do one or more of the following: +1. Avoid use of drivers that use tasklets. (Such drivers will contain + calls to things like tasklet_schedule().) +2. Convert all drivers that you must use from tasklets to workqueues. +3. Force interrupts for drivers using tasklets onto other CPUs, + and also do I/O involving these drivers on other CPUs. +SCHED_SOFTIRQ: Do all of the following: +1. Avoid sending scheduler IPIs to the CPU to be de-jittered, + for example, ensure that at most one runnable kthread is present + on that CPU. If a thread that expects to run on the de-jittered + CPU awakens, the scheduler will send an IPI that can result in + a subsequent SCHED_SOFTIRQ. +2. Build with CONFIG_RCU_NOCB_CPU=y, CONFIG_RCU_NOCB_CPU_ALL=y, + CONFIG_NO_HZ_FULL=y, and, in addition, ensure that the CPU + to be de-jittered is marked as an adaptive-ticks CPU using the + "nohz_full=" boot parameter. This reduces the number of + scheduler-clock interrupts that the de-jittered CPU receives, + minimizing its chances of being selected to do the load balancing + work that runs in SCHED_SOFTIRQ context. +3. To the extent possible, keep the CPU out of the kernel when it + is non-idle, for example, by avoiding system calls and by + forcing both kernel threads and interrupts to execute elsewhere. + This further reduces the number of scheduler-clock interrupts + received by the de-jittered CPU. +HRTIMER_SOFTIRQ: Do all of the following: +1. To the extent possible, keep the CPU out of the kernel when it + is non-idle. For example, avoid system calls and force both + kernel threads and interrupts to execute elsewhere. +2. Build with CONFIG_HOTPLUG_CPU=y. Once boot completes, force the + CPU offline, then bring it back online. This forces recurring + timers to migrate elsewhere. If you are concerned with multiple + CPUs, force them all offline before bringing the first one + back online. Once you have onlined the CPUs in question, do not + offline any other CPUs, because doing so could force the timer + back onto one of the CPUs in question. +RCU_SOFTIRQ: Do at least one of the following: +1. Offload callbacks and keep the CPU in either dyntick-idle or + adaptive-ticks state by doing all of the following: + a. Build with CONFIG_RCU_NOCB_CPU=y, CONFIG_RCU_NOCB_CPU_ALL=y, + CONFIG_NO_HZ_FULL=y, and, in addition ensure that the CPU + to be de-jittered is marked as an adaptive-ticks CPU using + the "nohz_full=" boot parameter. Bind the rcuo kthreads + to housekeeping CPUs, which can tolerate OS jitter. + b. To the extent possible, keep the CPU out of the kernel + when it is non-idle, for example, by avoiding system + calls and by forcing both kernel threads and interrupts + to execute elsewhere. +2. Enable RCU to do its processing remotely via dyntick-idle by + doing all of the following: + a. Build with CONFIG_NO_HZ=y and CONFIG_RCU_FAST_NO_HZ=y. + b. Ensure that the CPU goes idle frequently, allowing other + CPUs to detect that it has passed through an RCU quiescent + state. If the kernel is built with CONFIG_NO_HZ_FULL=y, + userspace execution also allows other CPUs to detect that + the CPU in question has passed through a quiescent state. + c. To the extent possible, keep the CPU out of the kernel + when it is non-idle, for example, by avoiding system + calls and by forcing both kernel threads and interrupts + to execute elsewhere. + +Name: rcuc/%u +Purpose: Execute RCU callbacks in CONFIG_RCU_BOOST=y kernels. +To reduce its OS jitter, do at least one of the following: +1. Build the kernel with CONFIG_PREEMPT=n. This prevents these + kthreads from being created in the first place, and also obviates + the need for RCU priority boosting. This approach is feasible + for workloads that do not require high degrees of responsiveness. +2. Build the kernel with CONFIG_RCU_BOOST=n. This prevents these + kthreads from being created in the first place. This approach + is feasible only if your workload never requires RCU priority + boosting, for example, if you ensure frequent idle time on all + CPUs that might execute within the kernel. +3. Build with CONFIG_RCU_NOCB_CPU=y and CONFIG_RCU_NOCB_CPU_ALL=y, + which offloads all RCU callbacks to kthreads that can be moved + off of CPUs susceptible to OS jitter. This approach prevents the + rcuc/%u kthreads from having any work to do, so that they are + never awakened. +4. Ensure that the CPU never enters the kernel, and, in particular, + avoid initiating any CPU hotplug operations on this CPU. This is + another way of preventing any callbacks from being queued on the + CPU, again preventing the rcuc/%u kthreads from having any work + to do. + +Name: rcuob/%d, rcuop/%d, and rcuos/%d +Purpose: Offload RCU callbacks from the corresponding CPU. +To reduce its OS jitter, do at least one of the following: +1. Use affinity, cgroups, or other mechanism to force these kthreads + to execute on some other CPU. +2. Build with CONFIG_RCU_NOCB_CPUS=n, which will prevent these + kthreads from being created in the first place. However, please + note that this will not eliminate OS jitter, but will instead + shift it to RCU_SOFTIRQ. + +Name: watchdog/%u +Purpose: Detect software lockups on each CPU. +To reduce its OS jitter, do at least one of the following: +1. Build with CONFIG_LOCKUP_DETECTOR=n, which will prevent these + kthreads from being created in the first place. +2. Echo a zero to /proc/sys/kernel/watchdog to disable the + watchdog timer. +3. Echo a large number of /proc/sys/kernel/watchdog_thresh in + order to reduce the frequency of OS jitter due to the watchdog + timer down to a level that is acceptable for your workload. -- cgit v1.2.3 From 4f42f4ef0dba0cf837b628ac33231a7acb8fcc9d Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 26 Apr 2013 16:22:46 +0300 Subject: drm/i915: Always normalize return timeout for wait_timeout_ioctl MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As we recompute the remaining timeout after waiting, there is a potential for that timeout to be less than zero and so need sanitizing. The timeout is always returned to userspace and validated, so we should always perform the sanitation. v2 [vsyrjala]: Only normalize the timespec if it's invalid v3: Add a comment to clarify the situation and remove the now useless WARN_ON() (ickle) Cc: Ben Widawsky Signed-off-by: Chris Wilson Signed-off-by: Ville Syrjälä Tested-by: Ben Widawsky Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6be940effefd..6165535d15f0 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1045,6 +1045,8 @@ static int __wait_seqno(struct intel_ring_buffer *ring, u32 seqno, if (timeout) { struct timespec sleep_time = timespec_sub(now, before); *timeout = timespec_sub(*timeout, sleep_time); + if (!timespec_valid(timeout)) /* i.e. negative time remains */ + set_normalized_timespec(timeout, 0, 0); } switch (end) { @@ -1053,8 +1055,6 @@ static int __wait_seqno(struct intel_ring_buffer *ring, u32 seqno, case -ERESTARTSYS: /* Signal */ return (int)end; case 0: /* Timeout */ - if (timeout) - set_normalized_timespec(timeout, 0, 0); return -ETIME; default: /* Completed */ WARN_ON(end < 0); /* We're not aware of other errors */ @@ -2377,10 +2377,8 @@ i915_gem_wait_ioctl(struct drm_device *dev, void *data, struct drm_file *file) mutex_unlock(&dev->struct_mutex); ret = __wait_seqno(ring, seqno, reset_counter, true, timeout); - if (timeout) { - WARN_ON(!timespec_valid(timeout)); + if (timeout) args->timeout_ns = timespec_to_ns(timeout); - } return ret; out: -- cgit v1.2.3 From 3a359f0b21ab218c1bf7a6a1b638b6fd143d0b99 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sat, 20 Apr 2013 12:08:11 +0200 Subject: drm/mm: fix dump table BUG In commit 9e8944ab564f2e3dde90a518cd32048c58918608 Author: Chris Wilson Date: Thu Nov 15 11:32:17 2012 +0000 drm: Introduce an iterator over holes in the drm_mm range manager helpers and iterators for hole handling have been introduced with some debug BUG_ONs sprinkled over. Unfortunately this broke the mm dumper which unconditionally tried to compute the size of the very first hole. While at it unify the code a bit with the hole dumping in the loop. v2: Extract a hole dump helper. Reported-by: Christopher Harvey Cc: Christopher Harvey Cc: Dave Airlie Cc: Chris Wilson Cc: stable@vger.kernel.org Acked-by: Dave Airlie Signed-off-by: Daniel Vetter --- drivers/gpu/drm/drm_mm.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c index db1e2d6f90d7..07cf99cc8862 100644 --- a/drivers/gpu/drm/drm_mm.c +++ b/drivers/gpu/drm/drm_mm.c @@ -755,33 +755,35 @@ void drm_mm_debug_table(struct drm_mm *mm, const char *prefix) EXPORT_SYMBOL(drm_mm_debug_table); #if defined(CONFIG_DEBUG_FS) -int drm_mm_dump_table(struct seq_file *m, struct drm_mm *mm) +static unsigned long drm_mm_dump_hole(struct seq_file *m, struct drm_mm_node *entry) { - struct drm_mm_node *entry; - unsigned long total_used = 0, total_free = 0, total = 0; unsigned long hole_start, hole_end, hole_size; - hole_start = drm_mm_hole_node_start(&mm->head_node); - hole_end = drm_mm_hole_node_end(&mm->head_node); - hole_size = hole_end - hole_start; - if (hole_size) + if (entry->hole_follows) { + hole_start = drm_mm_hole_node_start(entry); + hole_end = drm_mm_hole_node_end(entry); + hole_size = hole_end - hole_start; seq_printf(m, "0x%08lx-0x%08lx: 0x%08lx: free\n", hole_start, hole_end, hole_size); - total_free += hole_size; + return hole_size; + } + + return 0; +} + +int drm_mm_dump_table(struct seq_file *m, struct drm_mm *mm) +{ + struct drm_mm_node *entry; + unsigned long total_used = 0, total_free = 0, total = 0; + + total_free += drm_mm_dump_hole(m, &mm->head_node); drm_mm_for_each_node(entry, mm) { seq_printf(m, "0x%08lx-0x%08lx: 0x%08lx: used\n", entry->start, entry->start + entry->size, entry->size); total_used += entry->size; - if (entry->hole_follows) { - hole_start = drm_mm_hole_node_start(entry); - hole_end = drm_mm_hole_node_end(entry); - hole_size = hole_end - hole_start; - seq_printf(m, "0x%08lx-0x%08lx: 0x%08lx: free\n", - hole_start, hole_end, hole_size); - total_free += hole_size; - } + total_free += drm_mm_dump_hole(m, entry); } total = total_free + total_used; -- cgit v1.2.3 From 51cea1f469ad473c8d8b7d4a227640b8c02bf167 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Thu, 21 Mar 2013 13:10:44 +0200 Subject: drm/i915: Fix pipe enabled mask for pipe C in WM calculations MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the incorrect enabled pipes mask for pipe C in the WM calculations. Additionally, in an effort to make the code easier to understand, populate the mask with 1 << PIPE_[ABC] instead of raw numbers. v2: Use 1 << PIPE_[ABC] (ickle/danvet) v3: Pass PIPE_[ABC] to g4x_compute_wm0() (ickle) Signed-off-by: Ville Syrjälä Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 44 ++++++++++++++++++++--------------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index de3b0dc5658b..aa01128ff192 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -1301,17 +1301,17 @@ static void valleyview_update_wm(struct drm_device *dev) vlv_update_drain_latency(dev); - if (g4x_compute_wm0(dev, 0, + if (g4x_compute_wm0(dev, PIPE_A, &valleyview_wm_info, latency_ns, &valleyview_cursor_wm_info, latency_ns, &planea_wm, &cursora_wm)) - enabled |= 1; + enabled |= 1 << PIPE_A; - if (g4x_compute_wm0(dev, 1, + if (g4x_compute_wm0(dev, PIPE_B, &valleyview_wm_info, latency_ns, &valleyview_cursor_wm_info, latency_ns, &planeb_wm, &cursorb_wm)) - enabled |= 2; + enabled |= 1 << PIPE_B; if (single_plane_enabled(enabled) && g4x_compute_srwm(dev, ffs(enabled) - 1, @@ -1357,17 +1357,17 @@ static void g4x_update_wm(struct drm_device *dev) int plane_sr, cursor_sr; unsigned int enabled = 0; - if (g4x_compute_wm0(dev, 0, + if (g4x_compute_wm0(dev, PIPE_A, &g4x_wm_info, latency_ns, &g4x_cursor_wm_info, latency_ns, &planea_wm, &cursora_wm)) - enabled |= 1; + enabled |= 1 << PIPE_A; - if (g4x_compute_wm0(dev, 1, + if (g4x_compute_wm0(dev, PIPE_B, &g4x_wm_info, latency_ns, &g4x_cursor_wm_info, latency_ns, &planeb_wm, &cursorb_wm)) - enabled |= 2; + enabled |= 1 << PIPE_B; if (single_plane_enabled(enabled) && g4x_compute_srwm(dev, ffs(enabled) - 1, @@ -1716,7 +1716,7 @@ static void ironlake_update_wm(struct drm_device *dev) unsigned int enabled; enabled = 0; - if (g4x_compute_wm0(dev, 0, + if (g4x_compute_wm0(dev, PIPE_A, &ironlake_display_wm_info, ILK_LP0_PLANE_LATENCY, &ironlake_cursor_wm_info, @@ -1727,10 +1727,10 @@ static void ironlake_update_wm(struct drm_device *dev) DRM_DEBUG_KMS("FIFO watermarks For pipe A -" " plane %d, " "cursor: %d\n", plane_wm, cursor_wm); - enabled |= 1; + enabled |= 1 << PIPE_A; } - if (g4x_compute_wm0(dev, 1, + if (g4x_compute_wm0(dev, PIPE_B, &ironlake_display_wm_info, ILK_LP0_PLANE_LATENCY, &ironlake_cursor_wm_info, @@ -1741,7 +1741,7 @@ static void ironlake_update_wm(struct drm_device *dev) DRM_DEBUG_KMS("FIFO watermarks For pipe B -" " plane %d, cursor: %d\n", plane_wm, cursor_wm); - enabled |= 2; + enabled |= 1 << PIPE_B; } /* @@ -1801,7 +1801,7 @@ static void sandybridge_update_wm(struct drm_device *dev) unsigned int enabled; enabled = 0; - if (g4x_compute_wm0(dev, 0, + if (g4x_compute_wm0(dev, PIPE_A, &sandybridge_display_wm_info, latency, &sandybridge_cursor_wm_info, latency, &plane_wm, &cursor_wm)) { @@ -1812,10 +1812,10 @@ static void sandybridge_update_wm(struct drm_device *dev) DRM_DEBUG_KMS("FIFO watermarks For pipe A -" " plane %d, " "cursor: %d\n", plane_wm, cursor_wm); - enabled |= 1; + enabled |= 1 << PIPE_A; } - if (g4x_compute_wm0(dev, 1, + if (g4x_compute_wm0(dev, PIPE_B, &sandybridge_display_wm_info, latency, &sandybridge_cursor_wm_info, latency, &plane_wm, &cursor_wm)) { @@ -1826,7 +1826,7 @@ static void sandybridge_update_wm(struct drm_device *dev) DRM_DEBUG_KMS("FIFO watermarks For pipe B -" " plane %d, cursor: %d\n", plane_wm, cursor_wm); - enabled |= 2; + enabled |= 1 << PIPE_B; } /* @@ -1904,7 +1904,7 @@ static void ivybridge_update_wm(struct drm_device *dev) unsigned int enabled; enabled = 0; - if (g4x_compute_wm0(dev, 0, + if (g4x_compute_wm0(dev, PIPE_A, &sandybridge_display_wm_info, latency, &sandybridge_cursor_wm_info, latency, &plane_wm, &cursor_wm)) { @@ -1915,10 +1915,10 @@ static void ivybridge_update_wm(struct drm_device *dev) DRM_DEBUG_KMS("FIFO watermarks For pipe A -" " plane %d, " "cursor: %d\n", plane_wm, cursor_wm); - enabled |= 1; + enabled |= 1 << PIPE_A; } - if (g4x_compute_wm0(dev, 1, + if (g4x_compute_wm0(dev, PIPE_B, &sandybridge_display_wm_info, latency, &sandybridge_cursor_wm_info, latency, &plane_wm, &cursor_wm)) { @@ -1929,10 +1929,10 @@ static void ivybridge_update_wm(struct drm_device *dev) DRM_DEBUG_KMS("FIFO watermarks For pipe B -" " plane %d, cursor: %d\n", plane_wm, cursor_wm); - enabled |= 2; + enabled |= 1 << PIPE_B; } - if (g4x_compute_wm0(dev, 2, + if (g4x_compute_wm0(dev, PIPE_C, &sandybridge_display_wm_info, latency, &sandybridge_cursor_wm_info, latency, &plane_wm, &cursor_wm)) { @@ -1943,7 +1943,7 @@ static void ivybridge_update_wm(struct drm_device *dev) DRM_DEBUG_KMS("FIFO watermarks For pipe C -" " plane %d, cursor: %d\n", plane_wm, cursor_wm); - enabled |= 3; + enabled |= 1 << PIPE_C; } /* -- cgit v1.2.3 From f557c98b168a2860bfc7dedf4b4e3bafb59dc267 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Thu, 2 May 2013 19:25:11 +0800 Subject: spi/spi-atmel: BUG: fix doesn' support 16 bits transfers using PIO Fix using PIO transfer mode only support 8 bits transfer, doesn't support 16 bits. Signed-off-by: Richard Genoud [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang Signed-off-by: Mark Brown --- drivers/spi/spi-atmel.c | 47 ++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 38 insertions(+), 9 deletions(-) diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 787bd2c22bca..d8cb7da65efe 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -526,13 +526,17 @@ static void atmel_spi_next_xfer_pio(struct spi_master *master, } if (xfer->tx_buf) - spi_writel(as, TDR, *(u8 *)(xfer->tx_buf)); + if (xfer->bits_per_word > 8) + spi_writel(as, TDR, *(u16 *)(xfer->tx_buf)); + else + spi_writel(as, TDR, *(u8 *)(xfer->tx_buf)); else spi_writel(as, TDR, 0); dev_dbg(master->dev.parent, - " start pio xfer %p: len %u tx %p rx %p\n", - xfer, xfer->len, xfer->tx_buf, xfer->rx_buf); + " start pio xfer %p: len %u tx %p rx %p bitpw %d\n", + xfer, xfer->len, xfer->tx_buf, xfer->rx_buf, + xfer->bits_per_word); /* Enable relevant interrupts */ spi_writel(as, IER, SPI_BIT(RDRF) | SPI_BIT(OVRES)); @@ -950,21 +954,39 @@ atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer) { u8 *txp; u8 *rxp; + u16 *txp16; + u16 *rxp16; unsigned long xfer_pos = xfer->len - as->current_remaining_bytes; if (xfer->rx_buf) { - rxp = ((u8 *)xfer->rx_buf) + xfer_pos; - *rxp = spi_readl(as, RDR); + if (xfer->bits_per_word > 8) { + rxp16 = (u16 *)(((u8 *)xfer->rx_buf) + xfer_pos); + *rxp16 = spi_readl(as, RDR); + } else { + rxp = ((u8 *)xfer->rx_buf) + xfer_pos; + *rxp = spi_readl(as, RDR); + } } else { spi_readl(as, RDR); } - - as->current_remaining_bytes--; + if (xfer->bits_per_word > 8) { + as->current_remaining_bytes -= 2; + if (as->current_remaining_bytes < 0) + as->current_remaining_bytes = 0; + } else { + as->current_remaining_bytes--; + } if (as->current_remaining_bytes) { if (xfer->tx_buf) { - txp = ((u8 *)xfer->tx_buf) + xfer_pos + 1; - spi_writel(as, TDR, *txp); + if (xfer->bits_per_word > 8) { + txp16 = (u16 *)(((u8 *)xfer->tx_buf) + + xfer_pos + 2); + spi_writel(as, TDR, *txp16); + } else { + txp = ((u8 *)xfer->tx_buf) + xfer_pos + 1; + spi_writel(as, TDR, *txp); + } } else { spi_writel(as, TDR, 0); } @@ -1378,6 +1400,13 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) } } + if (xfer->bits_per_word > 8) { + if (xfer->len % 2) { + dev_dbg(&spi->dev, "buffer len should be 16 bits aligned\n"); + return -EINVAL; + } + } + /* FIXME implement these protocol options!! */ if (xfer->speed_hz) { dev_dbg(&spi->dev, "no protocol options yet\n"); -- cgit v1.2.3 From a9b054e8ab06504c2afa0e307ee78d3778993a1d Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 2 May 2013 09:43:05 +0200 Subject: drm: don't check modeset locks in panic handler Since we know that locking is broken in that case and it's more important to not flood the dmesg with random gunk. Cc: Dave Airlie Cc: Borislav Petkov References: http://lkml.kernel.org/r/20130502000206.GH15623@pd.tnic Cc: stable@vger.kernel.org Reported-and-tested-by: Borislav Petkov Signed-off-by: Daniel Vetter --- drivers/gpu/drm/drm_crtc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 792c3e3795ca..3be0802c6797 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -78,6 +78,10 @@ void drm_warn_on_modeset_not_all_locked(struct drm_device *dev) { struct drm_crtc *crtc; + /* Locking is currently fubar in the panic handler. */ + if (oops_in_progress) + return; + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) WARN_ON(!mutex_is_locked(&crtc->mutex)); -- cgit v1.2.3 From 237a1b01fdb29df6a28d50d6dbe7a988c4fb3625 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 1 May 2013 12:18:43 -0700 Subject: lp8788-charger: Fix kconfig dependency Fix build errors in lp8788-charger by making it depend on IIO. Fixes errors when CONFIG_IIO=m and CHARGER_LP8788=y. lp8788-charger.c:(.text+0x2146b5): undefined reference to `iio_channel_get' lp8788-charger.c:(.text+0x2146ce): undefined reference to `iio_channel_get' lp8788-charger.c:(.text+0x214a86): undefined reference to `iio_read_channel_processed' lp8788-charger.c:(.text+0x214b51): undefined reference to `iio_read_channel_processed' lp8788-charger.c:(.text+0x214c30): undefined reference to `iio_read_channel_processed' lp8788-charger.c:(.text+0x214d93): undefined reference to `iio_channel_release' lp8788-charger.c:(.text+0x214dac): undefined reference to `iio_channel_release' Signed-off-by: Randy Dunlap Acked-by: Milo Kim Signed-off-by: Anton Vorontsov --- drivers/power/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 339f802b91c1..814bcb9c942d 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -284,6 +284,7 @@ config CHARGER_LP8788 tristate "TI LP8788 charger driver" depends on MFD_LP8788 depends on LP8788_ADC + depends on IIO help Say Y to enable support for the LP8788 linear charger. -- cgit v1.2.3 From e30b5dca15dea86aa697f9d58ff646294fe80d3d Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Fri, 3 May 2013 02:15:52 -0400 Subject: ext4: fix fio regression We (Linux Kernel Performance project) found a regression introduced by commit: f7fec032aa ext4: track all extent status in extent status tree The commit causes about 20% performance decrease in fio random write test. Profiler shows that rb_next() uses a lot of CPU time. The call stack is: rb_next ext4_es_find_delayed_extent ext4_map_blocks _ext4_get_block ext4_get_block_write __blockdev_direct_IO ext4_direct_IO generic_file_direct_write __generic_file_aio_write ext4_file_write aio_rw_vect_retry aio_run_iocb do_io_submit sys_io_submit system_call_fastpath io_submit td_io_getevents io_u_queued_complete thread_main main __libc_start_main The cause is that ext4_es_find_delayed_extent() doesn't have an upper bound, it keeps searching until a delayed extent is found. When there are a lots of non-delayed entries in the extent state tree, ext4_es_find_delayed_extent() may uses a lot of CPU time. Reported-by: LKP project Signed-off-by: Yan, Zheng Signed-off-by: Zheng Liu Cc: "Theodore Ts'o" --- fs/ext4/extents.c | 9 +++++---- fs/ext4/extents_status.c | 17 ++++++++++++----- fs/ext4/extents_status.h | 3 ++- fs/ext4/file.c | 4 ++-- include/trace/events/ext4.h | 4 ++-- 5 files changed, 23 insertions(+), 14 deletions(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 107936db244e..bc0f1910b9cf 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3642,7 +3642,7 @@ int ext4_find_delalloc_range(struct inode *inode, { struct extent_status es; - ext4_es_find_delayed_extent(inode, lblk_start, &es); + ext4_es_find_delayed_extent_range(inode, lblk_start, lblk_end, &es); if (es.es_len == 0) return 0; /* there is no delay extent in this tree */ else if (es.es_lblk <= lblk_start && @@ -4608,9 +4608,10 @@ static int ext4_find_delayed_extent(struct inode *inode, struct extent_status es; ext4_lblk_t block, next_del; - ext4_es_find_delayed_extent(inode, newes->es_lblk, &es); - if (newes->es_pblk == 0) { + ext4_es_find_delayed_extent_range(inode, newes->es_lblk, + newes->es_lblk + newes->es_len - 1, &es); + /* * No extent in extent-tree contains block @newes->es_pblk, * then the block may stay in 1)a hole or 2)delayed-extent. @@ -4630,7 +4631,7 @@ static int ext4_find_delayed_extent(struct inode *inode, } block = newes->es_lblk + newes->es_len; - ext4_es_find_delayed_extent(inode, block, &es); + ext4_es_find_delayed_extent_range(inode, block, EXT_MAX_BLOCKS, &es); if (es.es_len == 0) next_del = EXT_MAX_BLOCKS; else diff --git a/fs/ext4/extents_status.c b/fs/ext4/extents_status.c index fe3337a85ede..e6941e622d31 100644 --- a/fs/ext4/extents_status.c +++ b/fs/ext4/extents_status.c @@ -232,14 +232,16 @@ static struct extent_status *__es_tree_search(struct rb_root *root, } /* - * ext4_es_find_delayed_extent: find the 1st delayed extent covering @es->lblk - * if it exists, otherwise, the next extent after @es->lblk. + * ext4_es_find_delayed_extent_range: find the 1st delayed extent covering + * @es->lblk if it exists, otherwise, the next extent after @es->lblk. * * @inode: the inode which owns delayed extents * @lblk: the offset where we start to search + * @end: the offset where we stop to search * @es: delayed extent that we found */ -void ext4_es_find_delayed_extent(struct inode *inode, ext4_lblk_t lblk, +void ext4_es_find_delayed_extent_range(struct inode *inode, + ext4_lblk_t lblk, ext4_lblk_t end, struct extent_status *es) { struct ext4_es_tree *tree = NULL; @@ -247,7 +249,8 @@ void ext4_es_find_delayed_extent(struct inode *inode, ext4_lblk_t lblk, struct rb_node *node; BUG_ON(es == NULL); - trace_ext4_es_find_delayed_extent_enter(inode, lblk); + BUG_ON(end < lblk); + trace_ext4_es_find_delayed_extent_range_enter(inode, lblk); read_lock(&EXT4_I(inode)->i_es_lock); tree = &EXT4_I(inode)->i_es_tree; @@ -270,6 +273,10 @@ out: if (es1 && !ext4_es_is_delayed(es1)) { while ((node = rb_next(&es1->rb_node)) != NULL) { es1 = rb_entry(node, struct extent_status, rb_node); + if (es1->es_lblk > end) { + es1 = NULL; + break; + } if (ext4_es_is_delayed(es1)) break; } @@ -285,7 +292,7 @@ out: read_unlock(&EXT4_I(inode)->i_es_lock); ext4_es_lru_add(inode); - trace_ext4_es_find_delayed_extent_exit(inode, es); + trace_ext4_es_find_delayed_extent_range_exit(inode, es); } static struct extent_status * diff --git a/fs/ext4/extents_status.h b/fs/ext4/extents_status.h index d8e2d4dc311e..f740eb03b707 100644 --- a/fs/ext4/extents_status.h +++ b/fs/ext4/extents_status.h @@ -62,7 +62,8 @@ extern int ext4_es_insert_extent(struct inode *inode, ext4_lblk_t lblk, unsigned long long status); extern int ext4_es_remove_extent(struct inode *inode, ext4_lblk_t lblk, ext4_lblk_t len); -extern void ext4_es_find_delayed_extent(struct inode *inode, ext4_lblk_t lblk, +extern void ext4_es_find_delayed_extent_range(struct inode *inode, + ext4_lblk_t lblk, ext4_lblk_t end, struct extent_status *es); extern int ext4_es_lookup_extent(struct inode *inode, ext4_lblk_t lblk, struct extent_status *es); diff --git a/fs/ext4/file.c b/fs/ext4/file.c index 64848b595b24..1bc4523541d6 100644 --- a/fs/ext4/file.c +++ b/fs/ext4/file.c @@ -464,7 +464,7 @@ static loff_t ext4_seek_data(struct file *file, loff_t offset, loff_t maxsize) * If there is a delay extent at this offset, * it will be as a data. */ - ext4_es_find_delayed_extent(inode, last, &es); + ext4_es_find_delayed_extent_range(inode, last, last, &es); if (es.es_len != 0 && in_range(last, es.es_lblk, es.es_len)) { if (last != start) dataoff = last << blkbits; @@ -547,7 +547,7 @@ static loff_t ext4_seek_hole(struct file *file, loff_t offset, loff_t maxsize) * If there is a delay extent at this offset, * we will skip this extent. */ - ext4_es_find_delayed_extent(inode, last, &es); + ext4_es_find_delayed_extent_range(inode, last, last, &es); if (es.es_len != 0 && in_range(last, es.es_lblk, es.es_len)) { last = es.es_lblk + es.es_len; holeoff = last << blkbits; diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h index d0e686402df8..8ee15b97cd38 100644 --- a/include/trace/events/ext4.h +++ b/include/trace/events/ext4.h @@ -2139,7 +2139,7 @@ TRACE_EVENT(ext4_es_remove_extent, __entry->lblk, __entry->len) ); -TRACE_EVENT(ext4_es_find_delayed_extent_enter, +TRACE_EVENT(ext4_es_find_delayed_extent_range_enter, TP_PROTO(struct inode *inode, ext4_lblk_t lblk), TP_ARGS(inode, lblk), @@ -2161,7 +2161,7 @@ TRACE_EVENT(ext4_es_find_delayed_extent_enter, (unsigned long) __entry->ino, __entry->lblk) ); -TRACE_EVENT(ext4_es_find_delayed_extent_exit, +TRACE_EVENT(ext4_es_find_delayed_extent_range_exit, TP_PROTO(struct inode *inode, struct extent_status *es), TP_ARGS(inode, es), -- cgit v1.2.3 From 4ef69d0394cba8caa9f75d3f2e53429bfb8b3045 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 27 Apr 2013 11:47:01 +0200 Subject: ath9k: fix key allocation error handling for powersave keys If no keycache slots are available, ath_key_config can return -ENOSPC. If the key index is not checked for errors, it can lead to logspam that looks like this: "ath: wiphy0: keyreset: keycache entry 228 out of range" This can cause follow-up errors if the invalid keycache index gets used for tx. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 6963862a1872..c4fc3d14ea62 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1332,6 +1332,7 @@ static int ath9k_sta_add(struct ieee80211_hw *hw, struct ath_common *common = ath9k_hw_common(sc->sc_ah); struct ath_node *an = (struct ath_node *) sta->drv_priv; struct ieee80211_key_conf ps_key = { }; + int key; ath_node_attach(sc, sta, vif); @@ -1339,7 +1340,9 @@ static int ath9k_sta_add(struct ieee80211_hw *hw, vif->type != NL80211_IFTYPE_AP_VLAN) return 0; - an->ps_key = ath_key_config(common, vif, sta, &ps_key); + key = ath_key_config(common, vif, sta, &ps_key); + if (key > 0) + an->ps_key = key; return 0; } @@ -1356,6 +1359,7 @@ static void ath9k_del_ps_key(struct ath_softc *sc, return; ath_key_delete(common, &ps_key); + an->ps_key = 0; } static int ath9k_sta_remove(struct ieee80211_hw *hw, -- cgit v1.2.3 From db178340433f90e09ada35c174dfb2c84c2c71f4 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 2 May 2013 09:43:57 +0200 Subject: ath5k: do not reschedule tx_complete_work on stop This patch claim to fix "WARNING: at net/mac80211/util.c:599 ieee80211_can_queue_work.isra.7+0x30/0x40", which was reported at: https://bugzilla.redhat.com/show_bug.cgi?id=922295 We use ATH_STAT_STARTED flag to disallow to perform ath5k_tx_complete_poll_work() code, hence reschedule ah->tx_complete_work, when we stop device. This flag was defined in ath5k code, but it was not used. I didn't get feedback if the fix works, so patch is compile only tested. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 9b20d9ee2719..7f702fe3ecc2 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2369,6 +2369,9 @@ ath5k_tx_complete_poll_work(struct work_struct *work) int i; bool needreset = false; + if (!test_bit(ATH_STAT_STARTED, ah->status)) + return; + mutex_lock(&ah->lock); for (i = 0; i < ARRAY_SIZE(ah->txqs); i++) { @@ -2676,6 +2679,7 @@ done: mmiowb(); mutex_unlock(&ah->lock); + set_bit(ATH_STAT_STARTED, ah->status); ieee80211_queue_delayed_work(ah->hw, &ah->tx_complete_work, msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT)); @@ -2737,6 +2741,7 @@ void ath5k_stop(struct ieee80211_hw *hw) ath5k_stop_tasklets(ah); + clear_bit(ATH_STAT_STARTED, ah->status); cancel_delayed_work_sync(&ah->tx_complete_work); if (!ath5k_modparam_no_hw_rfkill_switch) -- cgit v1.2.3 From 2acd09f3232825a0e95134703ec59bc327ef9967 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Thu, 25 Apr 2013 15:04:02 -0700 Subject: target: Remove unused struct members in se_dev_entry Some were incremented, but never used anywhere from what I could tell. Signed-off-by: Andy Grover Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 14 -------------- drivers/target/target_core_internal.h | 1 - drivers/target/target_core_transport.c | 2 -- include/target/target_core_base.h | 4 ---- 4 files changed, 21 deletions(-) diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 2e4d655471bc..4630481b6043 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -68,7 +68,6 @@ transport_lookup_cmd_lun(struct se_cmd *se_cmd, u32 unpacked_lun) struct se_dev_entry *deve = se_cmd->se_deve; deve->total_cmds++; - deve->total_bytes += se_cmd->data_length; if ((se_cmd->data_direction == DMA_TO_DEVICE) && (deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY)) { @@ -85,8 +84,6 @@ transport_lookup_cmd_lun(struct se_cmd *se_cmd, u32 unpacked_lun) else if (se_cmd->data_direction == DMA_FROM_DEVICE) deve->read_bytes += se_cmd->data_length; - deve->deve_cmds++; - se_lun = deve->se_lun; se_cmd->se_lun = deve->se_lun; se_cmd->pr_res_key = deve->pr_res_key; @@ -275,17 +272,6 @@ int core_free_device_list_for_node( return 0; } -void core_dec_lacl_count(struct se_node_acl *se_nacl, struct se_cmd *se_cmd) -{ - struct se_dev_entry *deve; - unsigned long flags; - - spin_lock_irqsave(&se_nacl->device_list_lock, flags); - deve = se_nacl->device_list[se_cmd->orig_fe_lun]; - deve->deve_cmds--; - spin_unlock_irqrestore(&se_nacl->device_list_lock, flags); -} - void core_update_device_list_access( u32 mapped_lun, u32 lun_access, diff --git a/drivers/target/target_core_internal.h b/drivers/target/target_core_internal.h index 853bab60e362..18d49df4d0ac 100644 --- a/drivers/target/target_core_internal.h +++ b/drivers/target/target_core_internal.h @@ -8,7 +8,6 @@ extern struct t10_alua_lu_gp *default_lu_gp; struct se_dev_entry *core_get_se_deve_from_rtpi(struct se_node_acl *, u16); int core_free_device_list_for_node(struct se_node_acl *, struct se_portal_group *); -void core_dec_lacl_count(struct se_node_acl *, struct se_cmd *); void core_update_device_list_access(u32, u32, struct se_node_acl *); int core_enable_device_list_for_node(struct se_lun *, struct se_lun_acl *, u32, u32, struct se_node_acl *, struct se_portal_group *); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index f8388b4024aa..c3477fa60942 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2163,8 +2163,6 @@ void transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks) if (wait_for_tasks) transport_wait_for_tasks(cmd); - core_dec_lacl_count(cmd->se_sess->se_node_acl, cmd); - if (cmd->se_lun) transport_lun_remove_cmd(cmd); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index c4af592f7057..136b7b2f7b32 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -572,12 +572,8 @@ struct se_dev_entry { bool def_pr_registered; /* See transport_lunflags_table */ u32 lun_flags; - u32 deve_cmds; u32 mapped_lun; - u32 average_bytes; - u32 last_byte_count; u32 total_cmds; - u32 total_bytes; u64 pr_res_key; u64 creation_time; u32 attach_count; -- cgit v1.2.3 From e3e84cda321703b123f36488f50700f371bc7230 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Fri, 26 Apr 2013 11:09:03 -0700 Subject: target: Use FD_MAX_SECTORS/FD_BLOCKSIZE for blockdevs using fileio We can still see the error reported in https://patchwork.kernel.org/patch/2338981/ when using fileio backed by a block device. I'm assuming this will get us past that error (from sbc_parse_cdb), and also assuming it's OK to have our max_sectors be larger than the block's queue max hw sectors? Reported-by: Eric Harney Signed-off-by: Andy Grover Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_file.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c index 58ed683e04ae..1b1d544e927a 100644 --- a/drivers/target/target_core_file.c +++ b/drivers/target/target_core_file.c @@ -153,10 +153,6 @@ static int fd_configure_device(struct se_device *dev) struct request_queue *q = bdev_get_queue(inode->i_bdev); unsigned long long dev_size; - dev->dev_attrib.hw_block_size = - bdev_logical_block_size(inode->i_bdev); - dev->dev_attrib.hw_max_sectors = queue_max_hw_sectors(q); - /* * Determine the number of bytes from i_size_read() minus * one (1) logical sector from underlying struct block_device @@ -203,9 +199,6 @@ static int fd_configure_device(struct se_device *dev) goto fail; } - dev->dev_attrib.hw_block_size = FD_BLOCKSIZE; - dev->dev_attrib.hw_max_sectors = FD_MAX_SECTORS; - /* * Limit UNMAP emulation to 8k Number of LBAs (NoLB) */ @@ -226,6 +219,8 @@ static int fd_configure_device(struct se_device *dev) fd_dev->fd_block_size = dev->dev_attrib.hw_block_size; + dev->dev_attrib.hw_block_size = FD_BLOCKSIZE; + dev->dev_attrib.hw_max_sectors = FD_MAX_SECTORS; dev->dev_attrib.hw_queue_depth = FD_MAX_DEVICE_QUEUE_DEPTH; if (fd_dev->fbd_flags & FDBD_HAS_BUFFERED_IO_WCE) { -- cgit v1.2.3 From 64146db71e1aab919a3861d4ac958086da3a0973 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Tue, 30 Apr 2013 11:59:15 -0700 Subject: target: Have dev/enable show if TCM device is configured User tools need to know if the device is properly configured, since if not, some other attributes are invalid. Signed-off-by: Andy Grover Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_configfs.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index 43b7ac6c5b1c..4a8bd36d3958 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -1584,6 +1584,13 @@ static struct target_core_configfs_attribute target_core_attr_dev_udev_path = { .store = target_core_store_dev_udev_path, }; +static ssize_t target_core_show_dev_enable(void *p, char *page) +{ + struct se_device *dev = p; + + return snprintf(page, PAGE_SIZE, "%d\n", !!(dev->dev_flags & DF_CONFIGURED)); +} + static ssize_t target_core_store_dev_enable( void *p, const char *page, @@ -1609,8 +1616,8 @@ static ssize_t target_core_store_dev_enable( static struct target_core_configfs_attribute target_core_attr_dev_enable = { .attr = { .ca_owner = THIS_MODULE, .ca_name = "enable", - .ca_mode = S_IWUSR }, - .show = NULL, + .ca_mode = S_IRUGO | S_IWUSR }, + .show = target_core_show_dev_enable, .store = target_core_store_dev_enable, }; -- cgit v1.2.3 From bfbdb31d41b3d868449de272da746d1c2d0b764e Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 3 May 2013 16:46:41 -0700 Subject: iscsi-target: Fix NULL pointer dereference in iscsit_send_reject Fix up a NULL pointer dereference regression in iscsit_send_reject() introduced by from commit 2ec5a8c11. Reported-by: Geert Uytterhoeven Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index ffbc6a94be52..c230eacc6ced 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -3557,11 +3557,11 @@ static int iscsit_send_reject( struct iscsi_cmd *cmd, struct iscsi_conn *conn) { - u32 iov_count = 0, tx_size = 0; - struct iscsi_reject *hdr; + struct iscsi_reject *hdr = (struct iscsi_reject *)&cmd->pdu[0]; struct kvec *iov; + u32 iov_count = 0, tx_size; - iscsit_build_reject(cmd, conn, (struct iscsi_reject *)&cmd->pdu[0]); + iscsit_build_reject(cmd, conn, hdr); iov = &cmd->iov_misc[0]; iov[iov_count].iov_base = cmd->pdu; -- cgit v1.2.3 From 80690fdb959a652e02d4f40a684bd39586be9f32 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 May 2013 23:15:57 +0200 Subject: iscsi-target: Make buf param of iscsit_do_crypto_hash_buf() const void * Make the "buf" input param of iscsit_do_crypto_hash_buf() "const void *". This allows to remove lots of casts in its callers. Signed-off-by: Geert Uytterhoeven Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 57 +++++++++++++++---------------------- 1 file changed, 23 insertions(+), 34 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index c230eacc6ced..262ef1f23b38 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1250,7 +1250,7 @@ static u32 iscsit_do_crypto_hash_sg( static void iscsit_do_crypto_hash_buf( struct hash_desc *hash, - unsigned char *buf, + const void *buf, u32 payload_length, u32 padding, u8 *pad_bytes, @@ -2524,9 +2524,8 @@ static int iscsit_send_conn_drop_async_message( if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)hdr, ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, hdr, + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); cmd->tx_size += ISCSI_CRC_LEN; pr_debug("Attaching CRC32C HeaderDigest to" @@ -2662,9 +2661,8 @@ static int iscsit_send_datain(struct iscsi_cmd *cmd, struct iscsi_conn *conn) if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)cmd->pdu, ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, cmd->pdu, + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); iov[0].iov_len += ISCSI_CRC_LEN; tx_size += ISCSI_CRC_LEN; @@ -2841,9 +2839,8 @@ iscsit_send_logout(struct iscsi_cmd *cmd, struct iscsi_conn *conn) if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)&cmd->pdu[0], ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, &cmd->pdu[0], + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); iov[0].iov_len += ISCSI_CRC_LEN; tx_size += ISCSI_CRC_LEN; @@ -2900,9 +2897,8 @@ static int iscsit_send_unsolicited_nopin( if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)hdr, ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, hdr, + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); tx_size += ISCSI_CRC_LEN; pr_debug("Attaching CRC32C HeaderDigest to" @@ -2949,9 +2945,8 @@ iscsit_send_nopin(struct iscsi_cmd *cmd, struct iscsi_conn *conn) if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)hdr, ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, hdr, + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); iov[0].iov_len += ISCSI_CRC_LEN; tx_size += ISCSI_CRC_LEN; @@ -3040,9 +3035,8 @@ static int iscsit_send_r2t( if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)hdr, ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, hdr, + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); cmd->iov_misc[0].iov_len += ISCSI_CRC_LEN; tx_size += ISCSI_CRC_LEN; @@ -3256,9 +3250,8 @@ static int iscsit_send_response(struct iscsi_cmd *cmd, struct iscsi_conn *conn) if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)cmd->pdu, ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, cmd->pdu, + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); iov[0].iov_len += ISCSI_CRC_LEN; tx_size += ISCSI_CRC_LEN; @@ -3329,9 +3322,8 @@ iscsit_send_task_mgt_rsp(struct iscsi_cmd *cmd, struct iscsi_conn *conn) if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)hdr, ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, hdr, + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); cmd->iov_misc[0].iov_len += ISCSI_CRC_LEN; tx_size += ISCSI_CRC_LEN; @@ -3504,9 +3496,8 @@ static int iscsit_send_text_rsp( if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)hdr, ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, hdr, + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); iov[0].iov_len += ISCSI_CRC_LEN; tx_size += ISCSI_CRC_LEN; @@ -3574,9 +3565,8 @@ static int iscsit_send_reject( if (conn->conn_ops->HeaderDigest) { u32 *header_digest = (u32 *)&cmd->pdu[ISCSI_HDR_LEN]; - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)hdr, ISCSI_HDR_LEN, - 0, NULL, (u8 *)header_digest); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, hdr, + ISCSI_HDR_LEN, 0, NULL, (u8 *)header_digest); iov[0].iov_len += ISCSI_CRC_LEN; tx_size += ISCSI_CRC_LEN; @@ -3585,9 +3575,8 @@ static int iscsit_send_reject( } if (conn->conn_ops->DataDigest) { - iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, - (unsigned char *)cmd->buf_ptr, ISCSI_HDR_LEN, - 0, NULL, (u8 *)&cmd->data_crc); + iscsit_do_crypto_hash_buf(&conn->conn_tx_hash, cmd->buf_ptr, + ISCSI_HDR_LEN, 0, NULL, (u8 *)&cmd->data_crc); iov[iov_count].iov_base = &cmd->data_crc; iov[iov_count++].iov_len = ISCSI_CRC_LEN; -- cgit v1.2.3 From 657445fe8660100ad174600ebfa61536392b7624 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sat, 4 May 2013 10:09:18 +0200 Subject: Revert "drm/i915: revert eDP bpp clamping code changes" This reverts commit 57c219633275c7e7413f8bc7be250dc092887458. It's an ugly hack for a Haswell SDV platform where the vbt doesn't seem to fully agree with the panel. Since it seems to cause issues on real eDP platform let's just kill this hack again. Reported-and-tested-by: Josh Boyer References: https://lkml.org/lkml/2013/5/3/467 Cc: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index fc3bd9b4037c..0ab9813a79b5 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -702,6 +702,9 @@ intel_dp_compute_config(struct intel_encoder *encoder, /* Walk through all bpp values. Luckily they're all nicely spaced with 2 * bpc in between. */ bpp = min_t(int, 8*3, pipe_config->pipe_bpp); + if (is_edp(intel_dp) && dev_priv->edp.bpp) + bpp = min_t(int, bpp, dev_priv->edp.bpp); + for (; bpp >= 6*3; bpp -= 2*3) { mode_rate = intel_dp_link_required(target_clock, bpp); @@ -739,6 +742,7 @@ found: intel_dp->link_bw = bws[clock]; intel_dp->lane_count = lane_count; adjusted_mode->clock = drm_dp_bw_code_to_link_rate(intel_dp->link_bw); + pipe_config->pipe_bpp = bpp; pipe_config->pixel_target_clock = target_clock; DRM_DEBUG_KMS("DP link bw %02x lane count %d clock %d bpp %d\n", @@ -751,20 +755,6 @@ found: target_clock, adjusted_mode->clock, &pipe_config->dp_m_n); - /* - * XXX: We have a strange regression where using the vbt edp bpp value - * for the link bw computation results in black screens, the panel only - * works when we do the computation at the usual 24bpp (but still - * requires us to use 18bpp). Until that's fully debugged, stay - * bug-for-bug compatible with the old code. - */ - if (is_edp(intel_dp) && dev_priv->edp.bpp) { - DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", - bpp, dev_priv->edp.bpp); - bpp = min_t(int, bpp, dev_priv->edp.bpp); - } - pipe_config->pipe_bpp = bpp; - return true; } -- cgit v1.2.3 From 3ab9c63705cb7b1b9f83ddce725d8bd9ef7c66a9 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Fri, 3 May 2013 12:57:41 +0300 Subject: drm/i915: hsw: fix link training for eDP on port-A According to BSpec the link training sequence for eDP on HSW port-A should be as follows: 1. link training: clock recovery 2. link training: equalization 3. link training: set idle transmission mode 4. display pipe enable 5. link training: disable (set normal mode) Contrary to this at the moment we don't do step 3. and we do step 5. before step 4. Fix this by setting idle transmission mode for eDP at the end of intel_dp_complete_link_train and adding a new intel_dp_stop_link_training function to disable link training. With these changes we'll end up with the following functions corresponding to the above steps: intel_dp_start_link_train -> step 1. intel_dp_complete_link_train -> step 2., step 3. intel_dp_stop_link_train -> step 5. For port-A we'll call intel_dp_stop_link_train only after enabling the pipe, for everything else we'll call it right after intel_dp_complete_link_train to preserve the current behavior. Tested on HSW/HSW-ULT. In v2: - Due to a HW issue we must set idle transmission mode for port-A too before enabling the pipe. Thanks for Arthur Runyan for explaining this. - Update the patch subject to make it clear that it's an eDP fix, DP is not affected. v3: - rename intel_dp_link_train() to intel_dp_set_link_train(), use 'val' instead 'l' as var name. (Paulo) Signed-off-by: Imre Deak Reviewed-by: Paulo Zanoni Tested-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_ddi.c | 5 ++++ drivers/gpu/drm/i915/intel_dp.c | 59 ++++++++++++++++++++++++++++++---------- drivers/gpu/drm/i915/intel_drv.h | 1 + 3 files changed, 50 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 26a0a570f92e..fb961bb81903 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1265,6 +1265,8 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder) intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); intel_dp_start_link_train(intel_dp); intel_dp_complete_link_train(intel_dp); + if (port != PORT_A) + intel_dp_stop_link_train(intel_dp); } } @@ -1326,6 +1328,9 @@ static void intel_enable_ddi(struct intel_encoder *intel_encoder) } else if (type == INTEL_OUTPUT_EDP) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + if (port == PORT_A) + intel_dp_stop_link_train(intel_dp); + ironlake_edp_backlight_on(intel_dp); } diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 0ab9813a79b5..93694da7f717 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1379,6 +1379,7 @@ static void intel_enable_dp(struct intel_encoder *encoder) ironlake_edp_panel_on(intel_dp); ironlake_edp_panel_vdd_off(intel_dp, true); intel_dp_complete_link_train(intel_dp); + intel_dp_stop_link_train(intel_dp); ironlake_edp_backlight_on(intel_dp); } @@ -1701,10 +1702,9 @@ intel_dp_set_link_train(struct intel_dp *intel_dp, struct drm_i915_private *dev_priv = dev->dev_private; enum port port = intel_dig_port->port; int ret; - uint32_t temp; if (HAS_DDI(dev)) { - temp = I915_READ(DP_TP_CTL(port)); + uint32_t temp = I915_READ(DP_TP_CTL(port)); if (dp_train_pat & DP_LINK_SCRAMBLING_DISABLE) temp |= DP_TP_CTL_SCRAMBLE_DISABLE; @@ -1714,18 +1714,6 @@ intel_dp_set_link_train(struct intel_dp *intel_dp, temp &= ~DP_TP_CTL_LINK_TRAIN_MASK; switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) { case DP_TRAINING_PATTERN_DISABLE: - - if (port != PORT_A) { - temp |= DP_TP_CTL_LINK_TRAIN_IDLE; - I915_WRITE(DP_TP_CTL(port), temp); - - if (wait_for((I915_READ(DP_TP_STATUS(port)) & - DP_TP_STATUS_IDLE_DONE), 1)) - DRM_ERROR("Timed out waiting for DP idle patterns\n"); - - temp &= ~DP_TP_CTL_LINK_TRAIN_MASK; - } - temp |= DP_TP_CTL_LINK_TRAIN_NORMAL; break; @@ -1801,6 +1789,37 @@ intel_dp_set_link_train(struct intel_dp *intel_dp, return true; } +static void intel_dp_set_idle_link_train(struct intel_dp *intel_dp) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + enum port port = intel_dig_port->port; + uint32_t val; + + if (!HAS_DDI(dev)) + return; + + val = I915_READ(DP_TP_CTL(port)); + val &= ~DP_TP_CTL_LINK_TRAIN_MASK; + val |= DP_TP_CTL_LINK_TRAIN_IDLE; + I915_WRITE(DP_TP_CTL(port), val); + + /* + * On PORT_A we can have only eDP in SST mode. There the only reason + * we need to set idle transmission mode is to work around a HW issue + * where we enable the pipe while not in idle link-training mode. + * In this case there is requirement to wait for a minimum number of + * idle patterns to be sent. + */ + if (port == PORT_A) + return; + + if (wait_for((I915_READ(DP_TP_STATUS(port)) & DP_TP_STATUS_IDLE_DONE), + 1)) + DRM_ERROR("Timed out waiting for DP idle patterns\n"); +} + /* Enable corresponding port and start training pattern 1 */ void intel_dp_start_link_train(struct intel_dp *intel_dp) @@ -1943,10 +1962,19 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) ++tries; } + intel_dp_set_idle_link_train(intel_dp); + + intel_dp->DP = DP; + if (channel_eq) DRM_DEBUG_KMS("Channel EQ done. DP Training successfull\n"); - intel_dp_set_link_train(intel_dp, DP, DP_TRAINING_PATTERN_DISABLE); +} + +void intel_dp_stop_link_train(struct intel_dp *intel_dp) +{ + intel_dp_set_link_train(intel_dp, intel_dp->DP, + DP_TRAINING_PATTERN_DISABLE); } static void @@ -2154,6 +2182,7 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) drm_get_encoder_name(&intel_encoder->base)); intel_dp_start_link_train(intel_dp); intel_dp_complete_link_train(intel_dp); + intel_dp_stop_link_train(intel_dp); } } diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index b5b6d19e6dd3..624a9e6b8d71 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -499,6 +499,7 @@ extern void intel_dp_init_connector(struct intel_digital_port *intel_dig_port, extern void intel_dp_init_link_config(struct intel_dp *intel_dp); extern void intel_dp_start_link_train(struct intel_dp *intel_dp); extern void intel_dp_complete_link_train(struct intel_dp *intel_dp); +extern void intel_dp_stop_link_train(struct intel_dp *intel_dp); extern void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode); extern void intel_dp_encoder_destroy(struct drm_encoder *encoder); extern void intel_dp_check_link_status(struct intel_dp *intel_dp); -- cgit v1.2.3 From 87c46b6c3d9c4d7f22bc553945728f5a82e9248a Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 4 May 2013 14:38:59 +0100 Subject: ARM: finally enable IRQ time accounting config We've had IRQ time accounting for the last six months, except for the Kconfig symbol. This somehow got missed out of the original patch. Add this now. Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 62079d434581..b2d235d015d3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -38,6 +38,7 @@ config ARM select HAVE_GENERIC_HARDIRQS select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) select HAVE_IDE if PCI || ISA || PCMCIA + select HAVE_IRQ_TIME_ACCOUNTING select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZMA select HAVE_KERNEL_LZO -- cgit v1.2.3 From 485cf5dac2966b93ef2b6211cf2fd42d66c823e6 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 24 Apr 2013 17:19:13 -0700 Subject: idle: Fix hlt/nohlt command-line handling in new generic idle commit d1669912 (idle: Implement generic idle function) added a new generic idle along with support for hlt/nohlt command line options to override default idle loop behavior. However, the command-line processing is never compiled. The command-line handling is wrapped by CONFIG_GENERIC_IDLE_POLL_SETUP and arches that use this feature select it in their Kconfigs. However, no Kconfig definition was created for this option, so it is never enabled, and therefore command-line override of the idle-loop behavior is broken after migrating to the generic idle loop. To fix, add a Kconfig definition for GENERIC_IDLE_POLL_SETUP. Tested on ARM (OMAP4/Panda) which enables the command-line overrides by default. Signed-off-by: Kevin Hilman Reviewed-by: Srivatsa S. Bhat Cc: Linus Torvalds Cc: Rusty Russell Cc: Paul McKenney Cc: Peter Zijlstra Cc: Magnus Damm Cc: linux-arm-kernel@lists.infradead.org Cc: linaro-kernel@lists.linaro.org Link: http://lkml.kernel.org/r/1366849153-25564-1-git-send-email-khilman@linaro.org Signed-off-by: Thomas Gleixner --- arch/Kconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/Kconfig b/arch/Kconfig index 99f0e17df429..3e644037195b 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -213,6 +213,9 @@ config USE_GENERIC_SMP_HELPERS config GENERIC_SMP_IDLE_THREAD bool +config GENERIC_IDLE_POLL_SETUP + bool + # Select if arch init_task initializer is different to init/init_task.c config ARCH_INIT_TASK bool -- cgit v1.2.3 From fbd44a607a1a5019bc32c3615cead8c5ee8f89c9 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 3 May 2013 20:22:36 +0200 Subject: tick: Use zalloc_cpumask_var for allocating offstack cpumasks commit b352bc1cbc (tick: Convert broadcast cpu bitmaps to cpumask_var_t) broke CONFIG_CPUMASK_OFFSTACK in a very subtle way. Instead of allocating the cpumasks with zalloc_cpumask_var it uses alloc_cpumask_var, so we can get random data there, which of course confuses the logic completely and causes random failures. Reported-and-tested-by: Dave Jones Reported-and-tested-by: Yinghai Lu Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305032015060.2990@ionos Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- kernel/time/tick-broadcast.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 61d00a8cdf2f..d70cdc42c829 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -785,11 +785,11 @@ bool tick_broadcast_oneshot_available(void) void __init tick_broadcast_init(void) { - alloc_cpumask_var(&tick_broadcast_mask, GFP_NOWAIT); - alloc_cpumask_var(&tmpmask, GFP_NOWAIT); + zalloc_cpumask_var(&tick_broadcast_mask, GFP_NOWAIT); + zalloc_cpumask_var(&tmpmask, GFP_NOWAIT); #ifdef CONFIG_TICK_ONESHOT - alloc_cpumask_var(&tick_broadcast_oneshot_mask, GFP_NOWAIT); - alloc_cpumask_var(&tick_broadcast_pending_mask, GFP_NOWAIT); - alloc_cpumask_var(&tick_broadcast_force_mask, GFP_NOWAIT); + zalloc_cpumask_var(&tick_broadcast_oneshot_mask, GFP_NOWAIT); + zalloc_cpumask_var(&tick_broadcast_pending_mask, GFP_NOWAIT); + zalloc_cpumask_var(&tick_broadcast_force_mask, GFP_NOWAIT); #endif } -- cgit v1.2.3 From e6155736ad76b2070652745f9e54cdea3f0d8567 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Sun, 5 May 2013 23:10:00 -0400 Subject: ext4: limit group search loop for non-extent files In the case where we are allocating for a non-extent file, we must limit the groups we allocate from to those below 2^32 blocks, and ext4_mb_regular_allocator() attempts to do this initially by putting a cap on ngroups for the subsequent search loop. However, the initial target group comes in from the allocation context (ac), and it may already be beyond the artificially limited ngroups. In this case, the limit if (group == ngroups) group = 0; at the top of the loop is never true, and the loop will run away. Catch this case inside the loop and reset the search to start at group 0. [sandeen@redhat.com: add commit msg & comments] Signed-off-by: Lachlan McIlroy Signed-off-by: Eric Sandeen Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org --- fs/ext4/mballoc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index a11ea4d6164c..39d30f12d98d 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2105,7 +2105,11 @@ repeat: group = ac->ac_g_ex.fe_group; for (i = 0; i < ngroups; group++, i++) { - if (group == ngroups) + /* + * Artificially restricted ngroups for non-extent + * files makes group > ngroups possible on first loop. + */ + if (group >= ngroups) group = 0; /* This now checks without needing the buddy page */ -- cgit v1.2.3 From 3c9cfa782e075cc2348b949ba139911aac02c7cb Mon Sep 17 00:00:00 2001 From: Heiko Abraham Date: Sun, 5 May 2013 19:49:49 -0700 Subject: Input: egalax_ts - ABS_MT_POSITION_Y not reported well The egalax_ts touchscreen modul not report ABS_MT_POSITION_Y proper. As result it may be, that upper software levels only receive x coordinates well. Signed-off-by: Heiko Abraham Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/egalax_ts.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c index 17c9097f3b5d..39f3df8670c3 100644 --- a/drivers/input/touchscreen/egalax_ts.c +++ b/drivers/input/touchscreen/egalax_ts.c @@ -216,7 +216,7 @@ static int egalax_ts_probe(struct i2c_client *client, input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, EGALAX_MAX_X, 0, 0); input_set_abs_params(input_dev, - ABS_MT_POSITION_X, 0, EGALAX_MAX_Y, 0, 0); + ABS_MT_POSITION_Y, 0, EGALAX_MAX_Y, 0, 0); input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS, 0); input_set_drvdata(input_dev, ts); -- cgit v1.2.3 From 56218563adbc085a17aa735da2c3fdf9877fa9e7 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Sun, 5 May 2013 19:56:18 -0700 Subject: Input: wacom - add three new display tablets Cintiq 13HD, DTK 2241, and Cintiq 22HDT are supported. Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 36 ++++++++++++++++++++++++++++++++++++ drivers/input/tablet/wacom_wac.h | 1 + 2 files changed, 37 insertions(+) diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 0bfd8cf25200..afe4fe0a9060 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -546,6 +546,16 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) input_report_key(input, BTN_3, (data[6] & 0x08)); input_report_key(input, BTN_4, (data[6] & 0x10)); input_report_key(input, BTN_5, (data[6] & 0x20)); + } else if (features->type == WACOM_13HD) { + input_report_key(input, BTN_0, (data[3] & 0x01)); + input_report_key(input, BTN_1, (data[4] & 0x01)); + input_report_key(input, BTN_2, (data[4] & 0x02)); + input_report_key(input, BTN_3, (data[4] & 0x04)); + input_report_key(input, BTN_4, (data[4] & 0x08)); + input_report_key(input, BTN_5, (data[4] & 0x10)); + input_report_key(input, BTN_6, (data[4] & 0x20)); + input_report_key(input, BTN_7, (data[4] & 0x40)); + input_report_key(input, BTN_8, (data[4] & 0x80)); } else if (features->type == WACOM_24HD) { input_report_key(input, BTN_0, (data[6] & 0x01)); input_report_key(input, BTN_1, (data[6] & 0x02)); @@ -1301,6 +1311,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) case INTUOS4L: case CINTIQ: case WACOM_BEE: + case WACOM_13HD: case WACOM_21UX2: case WACOM_22HD: case WACOM_24HD: @@ -1579,6 +1590,15 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, wacom_setup_cintiq(wacom_wac); break; + case WACOM_13HD: + for (i = 0; i < 9; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + wacom_setup_cintiq(wacom_wac); + break; + case INTUOS3: case INTUOS3L: __set_bit(BTN_4, input_dev->keybit); @@ -1950,6 +1970,9 @@ static const struct wacom_features wacom_features_0xC5 = static const struct wacom_features wacom_features_0xC6 = { "Wacom Cintiq 12WX", WACOM_PKGLEN_INTUOS, 53020, 33440, 1023, 63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0x304 = + { "Wacom Cintiq 13HD", WACOM_PKGLEN_INTUOS, 59552, 33848, 1023, + 63, WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xC7 = { "Wacom DTU1931", WACOM_PKGLEN_GRAPHIRE, 37832, 30305, 511, 0, PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -1959,6 +1982,9 @@ static const struct wacom_features wacom_features_0xCE = static const struct wacom_features wacom_features_0xF0 = { "Wacom DTU1631", WACOM_PKGLEN_GRAPHIRE, 34623, 19553, 511, 0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x57 = + { "Wacom DTK2241", WACOM_PKGLEN_INTUOS, 95840, 54260, 2047, + 63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES}; static const struct wacom_features wacom_features_0x59 = /* Pen */ { "Wacom DTH2242", WACOM_PKGLEN_INTUOS, 95840, 54260, 2047, 63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, @@ -1972,6 +1998,12 @@ static const struct wacom_features wacom_features_0xCC = static const struct wacom_features wacom_features_0xFA = { "Wacom Cintiq 22HD", WACOM_PKGLEN_INTUOS, 95840, 54260, 2047, 63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0x5B = + { "Wacom Cintiq 22HDT", WACOM_PKGLEN_INTUOS, 95840, 54260, 2047, + 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e }; +static const struct wacom_features wacom_features_0x5E = + { "Wacom Cintiq 22HDT", .type = WACOM_24HDT, + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5b, .touch_max = 10 }; static const struct wacom_features wacom_features_0x90 = { "Wacom ISDv4 90", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -2143,8 +2175,11 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x43) }, { USB_DEVICE_WACOM(0x44) }, { USB_DEVICE_WACOM(0x45) }, + { USB_DEVICE_WACOM(0x57) }, { USB_DEVICE_WACOM(0x59) }, { USB_DEVICE_DETAILED(0x5D, USB_CLASS_HID, 0, 0) }, + { USB_DEVICE_WACOM(0x5B) }, + { USB_DEVICE_DETAILED(0x5E, USB_CLASS_HID, 0, 0) }, { USB_DEVICE_WACOM(0xB0) }, { USB_DEVICE_WACOM(0xB1) }, { USB_DEVICE_WACOM(0xB2) }, @@ -2205,6 +2240,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x100) }, { USB_DEVICE_WACOM(0x101) }, { USB_DEVICE_WACOM(0x10D) }, + { USB_DEVICE_WACOM(0x304) }, { USB_DEVICE_WACOM(0x4001) }, { USB_DEVICE_WACOM(0x47) }, { USB_DEVICE_WACOM(0xF4) }, diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index 5f9a7721e16c..dfc9e08e7f70 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -82,6 +82,7 @@ enum { WACOM_24HD, CINTIQ, WACOM_BEE, + WACOM_13HD, WACOM_MO, WIRELESS, BAMBOO_PT, -- cgit v1.2.3 From f0aaceac279477f2a830e2897e6fc4c3500fc683 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Sun, 5 May 2013 19:59:05 -0700 Subject: Input: wacom - add a few new styli for Cintiq series Add new styli for Cintiq 13HD and 22HD. Update comments for for tools. Check whole 10 nibbles of tool ID for tool types. Remove unuecessary tool type for Intuos series PAD. Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 36 +++++++++++++++++------------------- 1 file changed, 17 insertions(+), 19 deletions(-) diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index afe4fe0a9060..3b6998a27a3f 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -342,10 +342,10 @@ static int wacom_intuos_inout(struct wacom_wac *wacom) wacom->id[idx] = (data[2] << 4) | (data[3] >> 4) | ((data[7] & 0x0f) << 20) | ((data[8] & 0xf0) << 12); - switch (wacom->id[idx] & 0xfffff) { + switch (wacom->id[idx]) { case 0x812: /* Inking pen */ case 0x801: /* Intuos3 Inking pen */ - case 0x20802: /* Intuos4 Inking Pen */ + case 0x120802: /* Intuos4/5 Inking Pen */ case 0x012: wacom->tool[idx] = BTN_TOOL_PENCIL; break; @@ -356,11 +356,13 @@ static int wacom_intuos_inout(struct wacom_wac *wacom) case 0x823: /* Intuos3 Grip Pen */ case 0x813: /* Intuos3 Classic Pen */ case 0x885: /* Intuos3 Marker Pen */ - case 0x802: /* Intuos4 General Pen */ - case 0x804: /* Intuos4 Marker Pen */ - case 0x40802: /* Intuos4 Classic Pen */ - case 0x18802: /* DTH2242 Grip Pen */ + case 0x802: /* Intuos4/5 13HD/24HD General Pen */ + case 0x804: /* Intuos4/5 13HD/24HD Marker Pen */ case 0x022: + case 0x100804: /* Intuos4/5 13HD/24HD Art Pen */ + case 0x140802: /* Intuos4/5 13HD/24HD Classic Pen */ + case 0x160802: /* Cintiq 13HD Pro Pen */ + case 0x180802: /* DTH2242 Grip Pen */ wacom->tool[idx] = BTN_TOOL_PEN; break; @@ -391,10 +393,13 @@ static int wacom_intuos_inout(struct wacom_wac *wacom) case 0x82b: /* Intuos3 Grip Pen Eraser */ case 0x81b: /* Intuos3 Classic Pen Eraser */ case 0x91b: /* Intuos3 Airbrush Eraser */ - case 0x80c: /* Intuos4 Marker Pen Eraser */ - case 0x80a: /* Intuos4 General Pen Eraser */ - case 0x4080a: /* Intuos4 Classic Pen Eraser */ - case 0x90a: /* Intuos4 Airbrush Eraser */ + case 0x80c: /* Intuos4/5 13HD/24HD Marker Pen Eraser */ + case 0x80a: /* Intuos4/5 13HD/24HD General Pen Eraser */ + case 0x90a: /* Intuos4/5 13HD/24HD Airbrush Eraser */ + case 0x14080a: /* Intuos4/5 13HD/24HD Classic Pen Eraser */ + case 0x10090a: /* Intuos4/5 13HD/24HD Airbrush Eraser */ + case 0x10080c: /* Intuos4/5 13HD/24HD Art Pen Eraser */ + case 0x16080a: /* Cintiq 13HD Pro Pen Eraser */ wacom->tool[idx] = BTN_TOOL_RUBBER; break; @@ -402,7 +407,8 @@ static int wacom_intuos_inout(struct wacom_wac *wacom) case 0x912: case 0x112: case 0x913: /* Intuos3 Airbrush */ - case 0x902: /* Intuos4 Airbrush */ + case 0x902: /* Intuos4/5 13HD/24HD Airbrush */ + case 0x100902: /* Intuos4/5 13HD/24HD Airbrush */ wacom->tool[idx] = BTN_TOOL_AIRBRUSH; break; @@ -533,10 +539,8 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) input_report_key(input, BTN_8, (data[3] & 0x80)); } if (data[1] | (data[2] & 0x01) | data[3]) { - input_report_key(input, wacom->tool[1], 1); input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); } else { - input_report_key(input, wacom->tool[1], 0); input_report_abs(input, ABS_MISC, 0); } } else if (features->type == DTK) { @@ -600,10 +604,8 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) } if (data[1] | data[2] | (data[3] & 0x1f) | data[4] | data[6] | data[8]) { - input_report_key(input, wacom->tool[1], 1); input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); } else { - input_report_key(input, wacom->tool[1], 0); input_report_abs(input, ABS_MISC, 0); } } else if (features->type >= INTUOS5S && features->type <= INTUOS5L) { @@ -628,10 +630,8 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) } if (data[2] | (data[3] & 0x01) | data[4] | data[5]) { - input_report_key(input, wacom->tool[1], 1); input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); } else { - input_report_key(input, wacom->tool[1], 0); input_report_abs(input, ABS_MISC, 0); } } else { @@ -678,10 +678,8 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) if ((data[5] & 0x1f) | data[6] | (data[1] & 0x1f) | data[2] | (data[3] & 0x1f) | data[4] | data[8] | (data[7] & 0x01)) { - input_report_key(input, wacom->tool[1], 1); input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); } else { - input_report_key(input, wacom->tool[1], 0); input_report_abs(input, ABS_MISC, 0); } } -- cgit v1.2.3 From e778f56e2fdf2302626f40f01b3ffa33e4fd18a4 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 30 Apr 2013 08:01:18 +0000 Subject: netfilter: nf_{log,queue}: fix compilation without CONFIG_PROC_FS This patch fixes the following compilation error: net/netfilter/nf_log.c:373:38: error: 'struct netns_nf' has no member named 'proc_netfilter' if procfs is not set. The netns support for nf_log, nfnetlink_log and nfnetlink_queue_core requires CONFIG_PROC_FS in the removal path of their respective /proc interface since net->nf.proc_netfilter is undefined in that case. Reported-by: Fengguang Wu Signed-off-by: Pablo Neira Ayuso Acked-by: Gao feng --- net/netfilter/nf_log.c | 5 ++++- net/netfilter/nfnetlink_log.c | 2 ++ net/netfilter/nfnetlink_queue_core.c | 2 ++ 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index 388656d5a9ec..757951d251e3 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -368,17 +368,20 @@ static int __net_init nf_log_net_init(struct net *net) return 0; out_sysctl: +#ifdef CONFIG_PROC_FS /* For init_net: errors will trigger panic, don't unroll on error. */ if (!net_eq(net, &init_net)) remove_proc_entry("nf_log", net->nf.proc_netfilter); - +#endif return ret; } static void __net_exit nf_log_net_exit(struct net *net) { netfilter_log_sysctl_exit(net); +#ifdef CONFIG_PROC_FS remove_proc_entry("nf_log", net->nf.proc_netfilter); +#endif } static struct pernet_operations nf_log_net_ops = { diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index faf1e9300d8a..d83d881002a6 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -1045,7 +1045,9 @@ static int __net_init nfnl_log_net_init(struct net *net) static void __net_exit nfnl_log_net_exit(struct net *net) { +#ifdef CONFIG_PROC_FS remove_proc_entry("nfnetlink_log", net->nf.proc_netfilter); +#endif } static struct pernet_operations nfnl_log_net_ops = { diff --git a/net/netfilter/nfnetlink_queue_core.c b/net/netfilter/nfnetlink_queue_core.c index 2e0e835baf72..4e27fa035814 100644 --- a/net/netfilter/nfnetlink_queue_core.c +++ b/net/netfilter/nfnetlink_queue_core.c @@ -1285,7 +1285,9 @@ static int __net_init nfnl_queue_net_init(struct net *net) static void __net_exit nfnl_queue_net_exit(struct net *net) { +#ifdef CONFIG_PROC_FS remove_proc_entry("nfnetlink_queue", net->nf.proc_netfilter); +#endif } static struct pernet_operations nfnl_queue_net_ops = { -- cgit v1.2.3 From 42010ed0c669aeb1c5b015f5edf590c73919380c Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 6 May 2013 12:22:57 +0200 Subject: netfilter: update MAINTAINERS file * Remove reference to ipchains (not any longer in the tree) * Remove all P: (person) as this tag is obsolete according to the description. Therefore, update Jozsef Kadlecsik to M: so he can still show in the list of people. * Add URI to Netfilter's patchwork at ozlabs.org * Update URIs to Netfilter's git trees to point to kernel.org. Signed-off-by: Pablo Neira Ayuso --- MAINTAINERS | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index e1f5fac1838e..32aad62b3a6a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5502,18 +5502,18 @@ F: Documentation/networking/s2io.txt F: Documentation/networking/vxge.txt F: drivers/net/ethernet/neterion/ -NETFILTER/IPTABLES/IPCHAINS -P: Harald Welte -P: Jozsef Kadlecsik +NETFILTER/IPTABLES M: Pablo Neira Ayuso M: Patrick McHardy +M: Jozsef Kadlecsik L: netfilter-devel@vger.kernel.org L: netfilter@vger.kernel.org L: coreteam@netfilter.org W: http://www.netfilter.org/ W: http://www.iptables.org/ -T: git git://1984.lsi.us.es/nf -T: git git://1984.lsi.us.es/nf-next +Q: http://patchwork.ozlabs.org/project/netfilter-devel/list/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next.git S: Supported F: include/linux/netfilter* F: include/linux/netfilter/ -- cgit v1.2.3 From 756b253167be36ea74980220d606662713431503 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Thu, 2 May 2013 19:56:12 +0100 Subject: ARM: 7711/1: dove: fix Dove cpu type from V7 to PJ4 The CPU used in Marvell Dove SoCs is a PJ4 Sheeva core. Using CONFIG_CPU_PJ4 instead of CONFIG_CPU_V7 will enable iWMMXt extensions on Dove. Signed-off-by: Sebastian Hesselbarth Acked-by: Jason Cooper Acked-by: Andrew Lunn Signed-off-by: Russell King --- arch/arm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b2d235d015d3..7e3e2bfc5d7a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -492,7 +492,7 @@ config ARCH_IXP4XX config ARCH_DOVE bool "Marvell Dove" select ARCH_REQUIRE_GPIOLIB - select CPU_V7 + select CPU_PJ4 select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI select PINCTRL -- cgit v1.2.3 From c01c5a506b59a8248b7666c779eb4ed689937874 Mon Sep 17 00:00:00 2001 From: Daniel Tang Date: Fri, 3 May 2013 08:13:55 +0100 Subject: ARM: 7712/1: Remove trailing whitespace in arch/arm/Makefile Clean up some trailing whitespace issues in arch/arm/Makefile. Signed-off-by: Daniel Tang Signed-off-by: Russell King --- arch/arm/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 47374085befd..1ba358ba16b8 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -309,7 +309,7 @@ define archhelp echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' echo '* xipImage - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)' echo ' uImage - U-Boot wrapped zImage' - echo ' bootpImage - Combined zImage and initial RAM disk' + echo ' bootpImage - Combined zImage and initial RAM disk' echo ' (supply initrd image via make variable INITRD=)' echo '* dtbs - Build device tree blobs for enabled boards' echo ' install - Install uncompressed kernel' -- cgit v1.2.3 From 524eff183f51d080a83b348d0ea97c08b3607b9a Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Mon, 6 May 2013 18:27:17 +0200 Subject: perf: Fix EXIT event notification The perf_event_task_ctx() function needs to be called with preemption disabled, since it's checking for currently scheduled cpu against event cpu. We disable preemption for task related perf event context if there's one defined, leaving up to the chance which cpu it gets scheduled in. Signed-off-by: Jiri Olsa Acked-by: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Namhyung Kim Cc: Corey Ashford Cc: Frederic Weisbecker Cc: Paul Mackerras Cc: Stephane Eranian Cc: Borislav Petkov Link: http://lkml.kernel.org/r/1367857638-27631-2-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar --- kernel/events/core.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index 6b41c1899a8b..38b68a05c3c6 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -4474,7 +4474,7 @@ static void perf_event_task_ctx(struct perf_event_context *ctx, static void perf_event_task_event(struct perf_task_event *task_event) { struct perf_cpu_context *cpuctx; - struct perf_event_context *ctx; + struct perf_event_context *ctx, *task_ctx = task_event->task_ctx; struct pmu *pmu; int ctxn; @@ -4485,20 +4485,22 @@ static void perf_event_task_event(struct perf_task_event *task_event) goto next; perf_event_task_ctx(&cpuctx->ctx, task_event); - ctx = task_event->task_ctx; - if (!ctx) { - ctxn = pmu->task_ctx_nr; - if (ctxn < 0) - goto next; - ctx = rcu_dereference(current->perf_event_ctxp[ctxn]); - if (ctx) - perf_event_task_ctx(ctx, task_event); - } + if (task_ctx) + goto next; + ctxn = pmu->task_ctx_nr; + if (ctxn < 0) + goto next; + ctx = rcu_dereference(current->perf_event_ctxp[ctxn]); + if (ctx) + perf_event_task_ctx(ctx, task_event); next: put_cpu_ptr(pmu->pmu_cpu_context); } - if (task_event->task_ctx) - perf_event_task_ctx(task_event->task_ctx, task_event); + if (task_ctx) { + preempt_disable(); + perf_event_task_ctx(task_ctx, task_event); + preempt_enable(); + } rcu_read_unlock(); } -- cgit v1.2.3 From 52d857a8784a09576215c71cebf368d61c12a754 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Mon, 6 May 2013 18:27:18 +0200 Subject: perf: Factor out auxiliary events notification Add perf_event_aux() function to send out all types of auxiliary events - mmap, task, comm events. For each type there's match and output functions defined and used as callbacks during perf_event_aux processing. This way we can centralize the pmu/context iterating and event matching logic. Also since lot of the code was duplicated, this patch reduces the .text size about 2kB on my setup: snipped output from 'objdump -x kernel/events/core.o' before: Idx Name Size 0 .text 0000d313 after: Idx Name Size 0 .text 0000cad3 Signed-off-by: Jiri Olsa Acked-by: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Namhyung Kim Cc: Corey Ashford Cc: Frederic Weisbecker Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Borislav Petkov Link: http://lkml.kernel.org/r/1367857638-27631-3-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar --- kernel/events/core.c | 242 +++++++++++++++++++-------------------------------- 1 file changed, 89 insertions(+), 153 deletions(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index 38b68a05c3c6..9dc297faf7c0 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -4394,6 +4394,64 @@ perf_event_read_event(struct perf_event *event, perf_output_end(&handle); } +typedef int (perf_event_aux_match_cb)(struct perf_event *event, void *data); +typedef void (perf_event_aux_output_cb)(struct perf_event *event, void *data); + +static void +perf_event_aux_ctx(struct perf_event_context *ctx, + perf_event_aux_match_cb match, + perf_event_aux_output_cb output, + void *data) +{ + struct perf_event *event; + + list_for_each_entry_rcu(event, &ctx->event_list, event_entry) { + if (event->state < PERF_EVENT_STATE_INACTIVE) + continue; + if (!event_filter_match(event)) + continue; + if (match(event, data)) + output(event, data); + } +} + +static void +perf_event_aux(perf_event_aux_match_cb match, + perf_event_aux_output_cb output, + void *data, + struct perf_event_context *task_ctx) +{ + struct perf_cpu_context *cpuctx; + struct perf_event_context *ctx; + struct pmu *pmu; + int ctxn; + + rcu_read_lock(); + list_for_each_entry_rcu(pmu, &pmus, entry) { + cpuctx = get_cpu_ptr(pmu->pmu_cpu_context); + if (cpuctx->unique_pmu != pmu) + goto next; + perf_event_aux_ctx(&cpuctx->ctx, match, output, data); + if (task_ctx) + goto next; + ctxn = pmu->task_ctx_nr; + if (ctxn < 0) + goto next; + ctx = rcu_dereference(current->perf_event_ctxp[ctxn]); + if (ctx) + perf_event_aux_ctx(ctx, match, output, data); +next: + put_cpu_ptr(pmu->pmu_cpu_context); + } + + if (task_ctx) { + preempt_disable(); + perf_event_aux_ctx(task_ctx, match, output, data); + preempt_enable(); + } + rcu_read_unlock(); +} + /* * task tracking -- fork/exit * @@ -4416,8 +4474,9 @@ struct perf_task_event { }; static void perf_event_task_output(struct perf_event *event, - struct perf_task_event *task_event) + void *data) { + struct perf_task_event *task_event = data; struct perf_output_handle handle; struct perf_sample_data sample; struct task_struct *task = task_event->task; @@ -4445,64 +4504,11 @@ out: task_event->event_id.header.size = size; } -static int perf_event_task_match(struct perf_event *event) -{ - if (event->state < PERF_EVENT_STATE_INACTIVE) - return 0; - - if (!event_filter_match(event)) - return 0; - - if (event->attr.comm || event->attr.mmap || - event->attr.mmap_data || event->attr.task) - return 1; - - return 0; -} - -static void perf_event_task_ctx(struct perf_event_context *ctx, - struct perf_task_event *task_event) -{ - struct perf_event *event; - - list_for_each_entry_rcu(event, &ctx->event_list, event_entry) { - if (perf_event_task_match(event)) - perf_event_task_output(event, task_event); - } -} - -static void perf_event_task_event(struct perf_task_event *task_event) +static int perf_event_task_match(struct perf_event *event, + void *data __maybe_unused) { - struct perf_cpu_context *cpuctx; - struct perf_event_context *ctx, *task_ctx = task_event->task_ctx; - struct pmu *pmu; - int ctxn; - - rcu_read_lock(); - list_for_each_entry_rcu(pmu, &pmus, entry) { - cpuctx = get_cpu_ptr(pmu->pmu_cpu_context); - if (cpuctx->unique_pmu != pmu) - goto next; - perf_event_task_ctx(&cpuctx->ctx, task_event); - - if (task_ctx) - goto next; - ctxn = pmu->task_ctx_nr; - if (ctxn < 0) - goto next; - ctx = rcu_dereference(current->perf_event_ctxp[ctxn]); - if (ctx) - perf_event_task_ctx(ctx, task_event); -next: - put_cpu_ptr(pmu->pmu_cpu_context); - } - if (task_ctx) { - preempt_disable(); - perf_event_task_ctx(task_ctx, task_event); - preempt_enable(); - } - - rcu_read_unlock(); + return event->attr.comm || event->attr.mmap || + event->attr.mmap_data || event->attr.task; } static void perf_event_task(struct task_struct *task, @@ -4533,7 +4539,10 @@ static void perf_event_task(struct task_struct *task, }, }; - perf_event_task_event(&task_event); + perf_event_aux(perf_event_task_match, + perf_event_task_output, + &task_event, + task_ctx); } void perf_event_fork(struct task_struct *task) @@ -4559,8 +4568,9 @@ struct perf_comm_event { }; static void perf_event_comm_output(struct perf_event *event, - struct perf_comm_event *comm_event) + void *data) { + struct perf_comm_event *comm_event = data; struct perf_output_handle handle; struct perf_sample_data sample; int size = comm_event->event_id.header.size; @@ -4587,39 +4597,16 @@ out: comm_event->event_id.header.size = size; } -static int perf_event_comm_match(struct perf_event *event) -{ - if (event->state < PERF_EVENT_STATE_INACTIVE) - return 0; - - if (!event_filter_match(event)) - return 0; - - if (event->attr.comm) - return 1; - - return 0; -} - -static void perf_event_comm_ctx(struct perf_event_context *ctx, - struct perf_comm_event *comm_event) +static int perf_event_comm_match(struct perf_event *event, + void *data __maybe_unused) { - struct perf_event *event; - - list_for_each_entry_rcu(event, &ctx->event_list, event_entry) { - if (perf_event_comm_match(event)) - perf_event_comm_output(event, comm_event); - } + return event->attr.comm; } static void perf_event_comm_event(struct perf_comm_event *comm_event) { - struct perf_cpu_context *cpuctx; - struct perf_event_context *ctx; char comm[TASK_COMM_LEN]; unsigned int size; - struct pmu *pmu; - int ctxn; memset(comm, 0, sizeof(comm)); strlcpy(comm, comm_event->task->comm, sizeof(comm)); @@ -4629,24 +4616,11 @@ static void perf_event_comm_event(struct perf_comm_event *comm_event) comm_event->comm_size = size; comm_event->event_id.header.size = sizeof(comm_event->event_id) + size; - rcu_read_lock(); - list_for_each_entry_rcu(pmu, &pmus, entry) { - cpuctx = get_cpu_ptr(pmu->pmu_cpu_context); - if (cpuctx->unique_pmu != pmu) - goto next; - perf_event_comm_ctx(&cpuctx->ctx, comm_event); - ctxn = pmu->task_ctx_nr; - if (ctxn < 0) - goto next; - - ctx = rcu_dereference(current->perf_event_ctxp[ctxn]); - if (ctx) - perf_event_comm_ctx(ctx, comm_event); -next: - put_cpu_ptr(pmu->pmu_cpu_context); - } - rcu_read_unlock(); + perf_event_aux(perf_event_comm_match, + perf_event_comm_output, + comm_event, + NULL); } void perf_event_comm(struct task_struct *task) @@ -4708,8 +4682,9 @@ struct perf_mmap_event { }; static void perf_event_mmap_output(struct perf_event *event, - struct perf_mmap_event *mmap_event) + void *data) { + struct perf_mmap_event *mmap_event = data; struct perf_output_handle handle; struct perf_sample_data sample; int size = mmap_event->event_id.header.size; @@ -4736,46 +4711,24 @@ out: } static int perf_event_mmap_match(struct perf_event *event, - struct perf_mmap_event *mmap_event, - int executable) + void *data) { - if (event->state < PERF_EVENT_STATE_INACTIVE) - return 0; - - if (!event_filter_match(event)) - return 0; - - if ((!executable && event->attr.mmap_data) || - (executable && event->attr.mmap)) - return 1; - - return 0; -} - -static void perf_event_mmap_ctx(struct perf_event_context *ctx, - struct perf_mmap_event *mmap_event, - int executable) -{ - struct perf_event *event; + struct perf_mmap_event *mmap_event = data; + struct vm_area_struct *vma = mmap_event->vma; + int executable = vma->vm_flags & VM_EXEC; - list_for_each_entry_rcu(event, &ctx->event_list, event_entry) { - if (perf_event_mmap_match(event, mmap_event, executable)) - perf_event_mmap_output(event, mmap_event); - } + return (!executable && event->attr.mmap_data) || + (executable && event->attr.mmap); } static void perf_event_mmap_event(struct perf_mmap_event *mmap_event) { - struct perf_cpu_context *cpuctx; - struct perf_event_context *ctx; struct vm_area_struct *vma = mmap_event->vma; struct file *file = vma->vm_file; unsigned int size; char tmp[16]; char *buf = NULL; const char *name; - struct pmu *pmu; - int ctxn; memset(tmp, 0, sizeof(tmp)); @@ -4831,27 +4784,10 @@ got_name: mmap_event->event_id.header.size = sizeof(mmap_event->event_id) + size; - rcu_read_lock(); - list_for_each_entry_rcu(pmu, &pmus, entry) { - cpuctx = get_cpu_ptr(pmu->pmu_cpu_context); - if (cpuctx->unique_pmu != pmu) - goto next; - perf_event_mmap_ctx(&cpuctx->ctx, mmap_event, - vma->vm_flags & VM_EXEC); - - ctxn = pmu->task_ctx_nr; - if (ctxn < 0) - goto next; - - ctx = rcu_dereference(current->perf_event_ctxp[ctxn]); - if (ctx) { - perf_event_mmap_ctx(ctx, mmap_event, - vma->vm_flags & VM_EXEC); - } -next: - put_cpu_ptr(pmu->pmu_cpu_context); - } - rcu_read_unlock(); + perf_event_aux(perf_event_mmap_match, + perf_event_mmap_output, + mmap_event, + NULL); kfree(buf); } -- cgit v1.2.3 From 9673217c71b433d62d56cfb56c487e31af6f5574 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sun, 5 May 2013 15:59:29 +0400 Subject: s390: remove non existent reference to GENERIC_KERNEL_THREAD Signed-off-by: Alexander Shiyan Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 2c9789da0e24..da183c5a103c 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -98,7 +98,6 @@ config S390 select CLONE_BACKWARDS2 select GENERIC_CLOCKEVENTS select GENERIC_CPU_DEVICES if !SMP - select GENERIC_KERNEL_THREAD select GENERIC_SMP_IDLE_THREAD select GENERIC_TIME_VSYSCALL_OLD select HAVE_ALIGNED_STRUCT_PAGE if SLUB -- cgit v1.2.3 From 7678dcfb310a190aea9bee8cdeb1e14987600737 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 6 May 2013 16:26:01 +0200 Subject: s390/disassembler: prevent endless loop in print_fn_code() If the size of the opcode to be printed is larger than "len" we'll see an overflow of an unsigned long value, which means that the while loop within print_fn_code() will loop quite a long time until there is the next chance for an exit. So add an early exit check. Reported-by: Christian Ehrhardt Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/dis.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index 7f4a4a8c847c..be87d3e05a5b 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -1862,6 +1862,8 @@ void print_fn_code(unsigned char *code, unsigned long len) while (len) { ptr = buffer; opsize = insn_length(*code); + if (opsize > len) + break; ptr += sprintf(ptr, "%p: ", code); for (i = 0; i < opsize; i++) ptr += sprintf(ptr, "%02x", code[i]); -- cgit v1.2.3 From 617e164c35c94c936e3632b387d6dbb3d80c2c02 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Mon, 6 May 2013 21:44:36 +0200 Subject: s390: disable pfmf for clear page instruction Wit the introduction of large pages Linux also used pfmf for page clearing. The current implementation is not ideal, though: - currently we set usage intent=0, but cleared pages are often used directly after the clearing - z/VM does not yet provide EDAT - KVM does have to intercept PFMF even for resident pages Lets just the mvcl loop in all cases until we have a well defined pattern were pfmf is besser. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/page.h | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h index 75ce9b065f9f..5d64fb7619cc 100644 --- a/arch/s390/include/asm/page.h +++ b/arch/s390/include/asm/page.h @@ -32,7 +32,7 @@ void storage_key_init_range(unsigned long start, unsigned long end); -static unsigned long pfmf(unsigned long function, unsigned long address) +static inline unsigned long pfmf(unsigned long function, unsigned long address) { asm volatile( " .insn rre,0xb9af0000,%[function],%[address]" @@ -44,17 +44,13 @@ static unsigned long pfmf(unsigned long function, unsigned long address) static inline void clear_page(void *page) { - if (MACHINE_HAS_PFMF) { - pfmf(0x10000, (unsigned long)page); - } else { - register unsigned long reg1 asm ("1") = 0; - register void *reg2 asm ("2") = page; - register unsigned long reg3 asm ("3") = 4096; - asm volatile( - " mvcl 2,0" - : "+d" (reg2), "+d" (reg3) : "d" (reg1) - : "memory", "cc"); - } + register unsigned long reg1 asm ("1") = 0; + register void *reg2 asm ("2") = page; + register unsigned long reg3 asm ("3") = 4096; + asm volatile( + " mvcl 2,0" + : "+d" (reg2), "+d" (reg3) : "d" (reg1) + : "memory", "cc"); } static inline void copy_page(void *to, void *from) -- cgit v1.2.3 From 2e0192f13c4428bb624838a9cc6713b6237bab3b Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 19:38:52 +0800 Subject: ASoC: wm0010: fix error return code in wm0010_boot() Fix to return -ENOMEM in the memory malloc of 'out' and 'img_swap' error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- sound/soc/codecs/wm0010.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wm0010.c b/sound/soc/codecs/wm0010.c index ad2fee4bb4cd..fe5e10fd51df 100644 --- a/sound/soc/codecs/wm0010.c +++ b/sound/soc/codecs/wm0010.c @@ -667,6 +667,7 @@ static int wm0010_boot(struct snd_soc_codec *codec) /* On wm0010 only the CLKCTRL1 value is used */ pll_rec.clkctrl1 = wm0010->pll_clkctrl1; + ret = -ENOMEM; len = pll_rec.length + 8; out = kzalloc(len, GFP_KERNEL); if (!out) { -- cgit v1.2.3 From 97a5b81fa4d3a11dcdf224befc577f2e0abadc0b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 2 May 2013 16:21:15 +0200 Subject: x86: Fix idle consolidation fallout The core code expects the arch idle code to return with interrupts enabled. The conversion missed two x86 cases which fail to do that. Reported-and-tested-by: Markus Trippelsdorf Tested-by: Borislav Petkov Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305021557030.3972@ionos Signed-off-by: Thomas Gleixner --- arch/x86/kernel/process.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 607af0d4d5ef..4e7a37ff03ab 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -312,6 +312,8 @@ void arch_cpu_idle(void) { if (cpuidle_idle_call()) x86_idle(); + else + local_irq_enable(); } /* @@ -368,9 +370,6 @@ void amd_e400_remove_cpu(int cpu) */ static void amd_e400_idle(void) { - if (need_resched()) - return; - if (!amd_e400_c1e_detected) { u32 lo, hi; -- cgit v1.2.3 From c4ae25ecdf93132fb69b37d8121a86046615b53b Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Wed, 1 May 2013 11:00:34 -0700 Subject: Revert "drm/i915: Calculate correct stolen size for GEN7+" This reverts commit 03752f5b7b77b95d83479885040950fba1250850. This revert requires a bit of explanation on how I understand things work. Internally the architects/designers decide how the stolen encoding works. We put it in a doc. BIOS writers take these docs and implement it. Driver writers read the doc too, and read the value left by the BIOS writers, and then we make magic. The failing here is that in the docs we had[1] contained two different definitions for this register for Gen7. (We have both a PCI register, and an MMIO, and each of these were different). At the time [2] of 03752f5, we asked the architects what the correct value should be; but that doesn't match the reality (BIOS) unfortunately. So on all machines I can get my hands on, this revert is the right thing to do. I've also worked with the product group to confirm that they agree this revert is what we should do. People using HW made my "people" who both write their own BIOS, and have access to our docs (Apple?). Investigations are still ongoing about whether we need to add a list of machines needing special handling, but this patch should be the right thing for pretty much everyone. [1] The docs are still wrong on this one. Now instead of two registers with two definitions, we have one register with BOTH definitions, progress? [2] The open source PRMs have the "wrong" definitions in chapter Volume 1 part6, section 1.1.12. This digging was inspired by Paulo. Cc: Paulo Zanoni Signed-off-by: Ben Widawsky Acked-by: Jesse Barnes [danvet: Augment the patch saying that it's still a bit unclear whether there are any machines out there with "wrong" firmware and whether we need to add a list to handle them specially.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_gtt.c | 15 +-------------- drivers/gpu/drm/i915/i915_reg.h | 2 -- 2 files changed, 1 insertion(+), 16 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index dca614de71b6..bdb0d7717bc7 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -709,15 +709,6 @@ static inline size_t gen6_get_stolen_size(u16 snb_gmch_ctl) return snb_gmch_ctl << 25; /* 32 MB units */ } -static inline size_t gen7_get_stolen_size(u16 snb_gmch_ctl) -{ - static const int stolen_decoder[] = { - 0, 0, 0, 0, 0, 32, 48, 64, 128, 256, 96, 160, 224, 352}; - snb_gmch_ctl >>= IVB_GMCH_GMS_SHIFT; - snb_gmch_ctl &= IVB_GMCH_GMS_MASK; - return stolen_decoder[snb_gmch_ctl] << 20; -} - static int gen6_gmch_probe(struct drm_device *dev, size_t *gtt_total, size_t *stolen, @@ -747,11 +738,7 @@ static int gen6_gmch_probe(struct drm_device *dev, pci_read_config_word(dev->pdev, SNB_GMCH_CTRL, &snb_gmch_ctl); gtt_size = gen6_get_total_gtt_size(snb_gmch_ctl); - if (IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) - *stolen = gen7_get_stolen_size(snb_gmch_ctl); - else - *stolen = gen6_get_stolen_size(snb_gmch_ctl); - + *stolen = gen6_get_stolen_size(snb_gmch_ctl); *gtt_total = (gtt_size / sizeof(gen6_gtt_pte_t)) << PAGE_SHIFT; /* For Modern GENs the PTEs and register space are split in the BAR */ diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 83f9c26e1adb..2d6b62e42daf 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -46,8 +46,6 @@ #define SNB_GMCH_GGMS_MASK 0x3 #define SNB_GMCH_GMS_SHIFT 3 /* Graphics Mode Select */ #define SNB_GMCH_GMS_MASK 0x1f -#define IVB_GMCH_GMS_SHIFT 4 -#define IVB_GMCH_GMS_MASK 0xf /* PCI config space */ -- cgit v1.2.3 From 1ffc5289bfcf7f4c4e4213240bb4be68c48ce603 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Tue, 7 May 2013 18:54:05 +0300 Subject: drm/i915: clear the stolen fb before resuming Similar to commit 88afe715dd5469bc24ca7a19ac62dd3c241cab48 Author: Chris Wilson Date: Sun Dec 16 12:15:41 2012 +0000 drm/i915: Clear the stolen fb before enabling but on the resume path. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=57191 Reported-and-tested-by: Nikolay Amiantov Signed-off-by: Jani Nikula Reviewed-by: Chris Wilson Cc: stable@vger.kernel.org (3.9 only) Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_fb.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 0e19e575a1b4..6b7c3ca2c035 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -262,10 +262,22 @@ void intel_fbdev_fini(struct drm_device *dev) void intel_fbdev_set_suspend(struct drm_device *dev, int state) { drm_i915_private_t *dev_priv = dev->dev_private; - if (!dev_priv->fbdev) + struct intel_fbdev *ifbdev = dev_priv->fbdev; + struct fb_info *info; + + if (!ifbdev) return; - fb_set_suspend(dev_priv->fbdev->helper.fbdev, state); + info = ifbdev->helper.fbdev; + + /* On resume from hibernation: If the object is shmemfs backed, it has + * been restored from swap. If the object is stolen however, it will be + * full of whatever garbage was left in there. + */ + if (!state && ifbdev->ifb.obj->stolen) + memset_io(info->screen_base, 0, info->screen_size); + + fb_set_suspend(info, state); } MODULE_LICENSE("GPL and additional rights"); -- cgit v1.2.3 From 30650239adc9e4e9439256d6988e521518dccbb3 Mon Sep 17 00:00:00 2001 From: Alistair Popple Date: Mon, 29 Apr 2013 18:07:47 +0000 Subject: powerpc: Add an in memory udbg console This patch adds a new udbg early debug console which utilises statically defined input and output buffers stored within the kernel BSS. It is primarily designed to assist with bring up of new hardware which may not have a working console but which has a method of reading/writing kernel memory. This version incorporates comments made by Ben H (thanks!). Changes from v1: - Add memory barriers. - Ensure updating of read/write positions is atomic. Signed-off-by: Alistair Popple Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig.debug | 23 ++++++++ arch/powerpc/include/asm/udbg.h | 1 + arch/powerpc/kernel/udbg.c | 3 ++ arch/powerpc/sysdev/Makefile | 2 + arch/powerpc/sysdev/udbg_memcons.c | 105 +++++++++++++++++++++++++++++++++++++ 5 files changed, 134 insertions(+) create mode 100644 arch/powerpc/sysdev/udbg_memcons.c diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 5416e28a7538..863d877e0b5f 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -262,8 +262,31 @@ config PPC_EARLY_DEBUG_OPAL_HVSI Select this to enable early debugging for the PowerNV platform using an "hvsi" console +config PPC_EARLY_DEBUG_MEMCONS + bool "In memory console" + help + Select this to enable early debugging using an in memory console. + This console provides input and output buffers stored within the + kernel BSS and should be safe to select on any system. A debugger + can then be used to read kernel output or send input to the console. endchoice +config PPC_MEMCONS_OUTPUT_SIZE + int "In memory console output buffer size" + depends on PPC_EARLY_DEBUG_MEMCONS + default 4096 + help + Selects the size of the output buffer (in bytes) of the in memory + console. + +config PPC_MEMCONS_INPUT_SIZE + int "In memory console input buffer size" + depends on PPC_EARLY_DEBUG_MEMCONS + default 128 + help + Selects the size of the input buffer (in bytes) of the in memory + console. + config PPC_EARLY_DEBUG_OPAL def_bool y depends on PPC_EARLY_DEBUG_OPAL_RAW || PPC_EARLY_DEBUG_OPAL_HVSI diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h index 5a7510e9d09d..dc590919f8eb 100644 --- a/arch/powerpc/include/asm/udbg.h +++ b/arch/powerpc/include/asm/udbg.h @@ -52,6 +52,7 @@ extern void __init udbg_init_40x_realmode(void); extern void __init udbg_init_cpm(void); extern void __init udbg_init_usbgecko(void); extern void __init udbg_init_wsp(void); +extern void __init udbg_init_memcons(void); extern void __init udbg_init_ehv_bc(void); extern void __init udbg_init_ps3gelic(void); extern void __init udbg_init_debug_opal_raw(void); diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 13b867093499..9d3fdcd66290 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -64,6 +64,9 @@ void __init udbg_early_init(void) udbg_init_usbgecko(); #elif defined(CONFIG_PPC_EARLY_DEBUG_WSP) udbg_init_wsp(); +#elif defined(CONFIG_PPC_EARLY_DEBUG_MEMCONS) + /* In memory console */ + udbg_init_memcons(); #elif defined(CONFIG_PPC_EARLY_DEBUG_EHV_BC) udbg_init_ehv_bc(); #elif defined(CONFIG_PPC_EARLY_DEBUG_PS3GELIC) diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index b0a518e97599..99464a7bdb3b 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -64,6 +64,8 @@ endif obj-$(CONFIG_PPC_SCOM) += scom.o +obj-$(CONFIG_PPC_EARLY_DEBUG_MEMCONS) += udbg_memcons.o + subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror obj-$(CONFIG_PPC_XICS) += xics/ diff --git a/arch/powerpc/sysdev/udbg_memcons.c b/arch/powerpc/sysdev/udbg_memcons.c new file mode 100644 index 000000000000..ce5a7b489e4b --- /dev/null +++ b/arch/powerpc/sysdev/udbg_memcons.c @@ -0,0 +1,105 @@ +/* + * A udbg backend which logs messages and reads input from in memory + * buffers. + * + * The console output can be read from memcons_output which is a + * circular buffer whose next write position is stored in memcons.output_pos. + * + * Input may be passed by writing into the memcons_input buffer when it is + * empty. The input buffer is empty when both input_pos == input_start and + * *input_start == '\0'. + * + * Copyright (C) 2003-2005 Anton Blanchard and Milton Miller, IBM Corp + * Copyright (C) 2013 Alistair Popple, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +struct memcons { + char *output_start; + char *output_pos; + char *output_end; + char *input_start; + char *input_pos; + char *input_end; +}; + +static char memcons_output[CONFIG_PPC_MEMCONS_OUTPUT_SIZE]; +static char memcons_input[CONFIG_PPC_MEMCONS_INPUT_SIZE]; + +struct memcons memcons = { + .output_start = memcons_output, + .output_pos = memcons_output, + .output_end = &memcons_output[CONFIG_PPC_MEMCONS_OUTPUT_SIZE], + .input_start = memcons_input, + .input_pos = memcons_input, + .input_end = &memcons_input[CONFIG_PPC_MEMCONS_INPUT_SIZE], +}; + +void memcons_putc(char c) +{ + char *new_output_pos; + + *memcons.output_pos = c; + wmb(); + new_output_pos = memcons.output_pos + 1; + if (new_output_pos >= memcons.output_end) + new_output_pos = memcons.output_start; + + memcons.output_pos = new_output_pos; +} + +int memcons_getc_poll(void) +{ + char c; + char *new_input_pos; + + if (*memcons.input_pos) { + c = *memcons.input_pos; + + new_input_pos = memcons.input_pos + 1; + if (new_input_pos >= memcons.input_end) + new_input_pos = memcons.input_start; + else if (*new_input_pos == '\0') + new_input_pos = memcons.input_start; + + *memcons.input_pos = '\0'; + wmb(); + memcons.input_pos = new_input_pos; + return c; + } + + return -1; +} + +int memcons_getc(void) +{ + int c; + + while (1) { + c = memcons_getc_poll(); + if (c == -1) + cpu_relax(); + else + break; + } + + return c; +} + +void udbg_init_memcons(void) +{ + udbg_putc = memcons_putc; + udbg_getc = memcons_getc; + udbg_getc_poll = memcons_getc_poll; +} -- cgit v1.2.3 From 3eccfdb01da58fbd0f789ae6ca61cee3769e26de Mon Sep 17 00:00:00 2001 From: Shlomo Pongratz Date: Sun, 5 May 2013 17:36:26 +0300 Subject: iscsi-target: Fix processing of OOO commands Fix two issues in OOO commands processing done at iscsit_attach_ooo_cmdsn. Handle command serial numbers wrap around by using iscsi_sna_lt and not regular comparisson. The routine iterates until it finds an entry whose serial number is greater than the serial number of the new one, thus the new entry should be inserted before that entry and not after. Signed-off-by: Shlomo Pongratz Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_erl1.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_erl1.c b/drivers/target/iscsi/iscsi_target_erl1.c index 7816af6cdd12..40d9dbca987b 100644 --- a/drivers/target/iscsi/iscsi_target_erl1.c +++ b/drivers/target/iscsi/iscsi_target_erl1.c @@ -823,7 +823,7 @@ static int iscsit_attach_ooo_cmdsn( /* * CmdSN is greater than the tail of the list. */ - if (ooo_tail->cmdsn < ooo_cmdsn->cmdsn) + if (iscsi_sna_lt(ooo_tail->cmdsn, ooo_cmdsn->cmdsn)) list_add_tail(&ooo_cmdsn->ooo_list, &sess->sess_ooo_cmdsn_list); else { @@ -833,11 +833,12 @@ static int iscsit_attach_ooo_cmdsn( */ list_for_each_entry(ooo_tmp, &sess->sess_ooo_cmdsn_list, ooo_list) { - if (ooo_tmp->cmdsn < ooo_cmdsn->cmdsn) + if (iscsi_sna_lt(ooo_tmp->cmdsn, ooo_cmdsn->cmdsn)) continue; + /* Insert before this entry */ list_add(&ooo_cmdsn->ooo_list, - &ooo_tmp->ooo_list); + ooo_tmp->ooo_list.prev); break; } } -- cgit v1.2.3 From f558a845c3a043d032bb247cdbe50db9202476a1 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Fri, 3 May 2013 16:40:09 -0400 Subject: Add missing module license tag to vring helpers. [ 624.286653] vringh: module license 'unspecified' taints kernel. Signed-off-by: Dave Jones Signed-off-by: Rusty Russell --- drivers/vhost/vringh.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/vhost/vringh.c b/drivers/vhost/vringh.c index bff0775e258c..5174ebac288d 100644 --- a/drivers/vhost/vringh.c +++ b/drivers/vhost/vringh.c @@ -3,6 +3,7 @@ * * Since these may be in userspace, we use (inline) accessors. */ +#include #include #include #include @@ -1005,3 +1006,5 @@ int vringh_need_notify_kern(struct vringh *vrh) return __vringh_need_notify(vrh, getu16_kern); } EXPORT_SYMBOL(vringh_need_notify_kern); + +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From f616fe4feee4000c2995d2d1e1981513bf9ab0d4 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Wed, 8 May 2013 10:06:55 +0930 Subject: lguest: clear cached last cpu when guest_set_pgd() called. commit v3.9-rc1-53-g6d0cda9 "lguest: cache last cpu we ran on." missed one case, which causes a triple fault. The guest calls guest_set_pgd() on the top page, and we carefully remap the Switcher text page. But we didn't reset last_host_cpu, so map_switcher_in_guest() thinks the guest's regs and IDT/GDT etc are already mapped. Reported-by: Paul Bolle Tested-by: Paul Bolle Signed-off-by: Rusty Russell --- drivers/lguest/page_tables.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c index 699187ab3800..5b9ac32801c7 100644 --- a/drivers/lguest/page_tables.c +++ b/drivers/lguest/page_tables.c @@ -1002,6 +1002,7 @@ void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 idx) kill_guest(&lg->cpus[0], "Cannot populate switcher mapping"); } + lg->pgdirs[pgdir].last_host_cpu = -1; } } -- cgit v1.2.3 From 1de1455f33709a8afd8d41d26d09739a1148105b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 8 May 2013 14:14:26 +1000 Subject: powerpc/powernv: Properly drop characters if console is closed If the firmware returns an error such as "closed" (or hardware error), we should drop characters. Currently we only do that when a firmware compatible with OPAL v2 APIs is detected, in the code that calls opal_console_write_buffer_space(), which didn't exist with OPAL v1 (or didn't work). However, when enabling early debug consoles, the flag indicating that v2 is supported isn't set yet, causing us, in case of errors or closed console, to spin forever. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/powernv/opal.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index ade4463226c6..12d9846aa87e 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -144,6 +144,13 @@ int opal_put_chars(uint32_t vtermno, const char *data, int total_len) rc == OPAL_BUSY_EVENT || rc == OPAL_SUCCESS)) { len = total_len; rc = opal_console_write(vtermno, &len, data); + + /* Closed or other error drop */ + if (rc != OPAL_SUCCESS && rc != OPAL_BUSY && + rc != OPAL_BUSY_EVENT) { + written = total_len; + break; + } if (rc == OPAL_SUCCESS) { total_len -= len; data += len; -- cgit v1.2.3 From 2371e9cf14074c7d2542da56c5d6161fbe29a946 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Wed, 8 May 2013 09:14:20 +0200 Subject: ASoC: ux500: Swap even/odd AD slot definitions AD slots definitions for ab8500 codec were erroneously swapped between even and odd channels. Fix this by swapping the definitions to be coherent with the channel number. Signed-off-by: Fabio Baltieri Acked-by: Lee Jones Signed-off-by: Mark Brown --- sound/soc/codecs/ab8500-codec.h | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/sound/soc/codecs/ab8500-codec.h b/sound/soc/codecs/ab8500-codec.h index 114f69a0c629..306d0bc8455f 100644 --- a/sound/soc/codecs/ab8500-codec.h +++ b/sound/soc/codecs/ab8500-codec.h @@ -348,25 +348,25 @@ /* AB8500_ADSLOTSELX */ #define AB8500_ADSLOTSELX_AD_OUT1_TO_SLOT_ODD 0x00 -#define AB8500_ADSLOTSELX_AD_OUT2_TO_SLOT_ODD 0x01 -#define AB8500_ADSLOTSELX_AD_OUT3_TO_SLOT_ODD 0x02 -#define AB8500_ADSLOTSELX_AD_OUT4_TO_SLOT_ODD 0x03 -#define AB8500_ADSLOTSELX_AD_OUT5_TO_SLOT_ODD 0x04 -#define AB8500_ADSLOTSELX_AD_OUT6_TO_SLOT_ODD 0x05 -#define AB8500_ADSLOTSELX_AD_OUT7_TO_SLOT_ODD 0x06 -#define AB8500_ADSLOTSELX_AD_OUT8_TO_SLOT_ODD 0x07 -#define AB8500_ADSLOTSELX_ZEROES_TO_SLOT_ODD 0x08 -#define AB8500_ADSLOTSELX_TRISTATE_TO_SLOT_ODD 0x0F +#define AB8500_ADSLOTSELX_AD_OUT2_TO_SLOT_ODD 0x10 +#define AB8500_ADSLOTSELX_AD_OUT3_TO_SLOT_ODD 0x20 +#define AB8500_ADSLOTSELX_AD_OUT4_TO_SLOT_ODD 0x30 +#define AB8500_ADSLOTSELX_AD_OUT5_TO_SLOT_ODD 0x40 +#define AB8500_ADSLOTSELX_AD_OUT6_TO_SLOT_ODD 0x50 +#define AB8500_ADSLOTSELX_AD_OUT7_TO_SLOT_ODD 0x60 +#define AB8500_ADSLOTSELX_AD_OUT8_TO_SLOT_ODD 0x70 +#define AB8500_ADSLOTSELX_ZEROES_TO_SLOT_ODD 0x80 +#define AB8500_ADSLOTSELX_TRISTATE_TO_SLOT_ODD 0xF0 #define AB8500_ADSLOTSELX_AD_OUT1_TO_SLOT_EVEN 0x00 -#define AB8500_ADSLOTSELX_AD_OUT2_TO_SLOT_EVEN 0x10 -#define AB8500_ADSLOTSELX_AD_OUT3_TO_SLOT_EVEN 0x20 -#define AB8500_ADSLOTSELX_AD_OUT4_TO_SLOT_EVEN 0x30 -#define AB8500_ADSLOTSELX_AD_OUT5_TO_SLOT_EVEN 0x40 -#define AB8500_ADSLOTSELX_AD_OUT6_TO_SLOT_EVEN 0x50 -#define AB8500_ADSLOTSELX_AD_OUT7_TO_SLOT_EVEN 0x60 -#define AB8500_ADSLOTSELX_AD_OUT8_TO_SLOT_EVEN 0x70 -#define AB8500_ADSLOTSELX_ZEROES_TO_SLOT_EVEN 0x80 -#define AB8500_ADSLOTSELX_TRISTATE_TO_SLOT_EVEN 0xF0 +#define AB8500_ADSLOTSELX_AD_OUT2_TO_SLOT_EVEN 0x01 +#define AB8500_ADSLOTSELX_AD_OUT3_TO_SLOT_EVEN 0x02 +#define AB8500_ADSLOTSELX_AD_OUT4_TO_SLOT_EVEN 0x03 +#define AB8500_ADSLOTSELX_AD_OUT5_TO_SLOT_EVEN 0x04 +#define AB8500_ADSLOTSELX_AD_OUT6_TO_SLOT_EVEN 0x05 +#define AB8500_ADSLOTSELX_AD_OUT7_TO_SLOT_EVEN 0x06 +#define AB8500_ADSLOTSELX_AD_OUT8_TO_SLOT_EVEN 0x07 +#define AB8500_ADSLOTSELX_ZEROES_TO_SLOT_EVEN 0x08 +#define AB8500_ADSLOTSELX_TRISTATE_TO_SLOT_EVEN 0x0F #define AB8500_ADSLOTSELX_EVEN_SHIFT 0 #define AB8500_ADSLOTSELX_ODD_SHIFT 4 -- cgit v1.2.3 From 49ece554288caf1a8ea9e546ab1ff5bc4b175456 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 08:37:00 -0500 Subject: rbd: fix leak of format 2 snapshot context When rbd_dev_v2_refresh() is called, the rbd device already has a snapshot context associated with it. But that never gets freed, the pointer just gets overwritten. Fix this by dropping the rbd device's reference to the snapshot context before overwriting the pointer. Because ceph_put_snap_context() already handles for a null pointer we don't need to check for that (for the probe case, where no context has yet been assigned). This resolves: http://tracker.ceph.com/issues/4912 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index c2ca1818f335..426374321d75 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -4004,6 +4004,7 @@ static int rbd_dev_v2_snap_context(struct rbd_device *rbd_dev) for (i = 0; i < snap_count; i++) snapc->snaps[i] = ceph_decode_64(&p); + ceph_put_snap_context(rbd_dev->header.snapc); rbd_dev->header.snapc = snapc; dout(" snap context seq = %llu, snap_count = %u\n", -- cgit v1.2.3 From e627db085e0dab7744b68f3c927be6ed6df2f7f9 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 07:40:30 -0500 Subject: rbd: revalidate only for mapping size changes This commit: d98df63e rbd: revalidate_disk upon rbd resize instituted a call to revalidate_disk() to notify interested parties that a mapped image has changed size. This works well, as long as the the rbd device doesn't map a snapshot. A snapshot will never change size. However, the base image the snapshot is associated with can, and it can do so while the snapshot is mapped. The problem is that the test for the size is looking at the size of the base image, not the size of the mapped snapshot. This patch corrects that. Update the warning message shown in the event of error, and move it into the callers. This resolves: http://tracker.ceph.com/issues/4911 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 426374321d75..5d5e3f0b5fb4 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2628,6 +2628,7 @@ out: static void rbd_watch_cb(u64 ver, u64 notify_id, u8 opcode, void *data) { struct rbd_device *rbd_dev = (struct rbd_device *)data; + int ret; if (!rbd_dev) return; @@ -2635,7 +2636,9 @@ static void rbd_watch_cb(u64 ver, u64 notify_id, u8 opcode, void *data) dout("%s: \"%s\" notify_id %llu opcode %u\n", __func__, rbd_dev->header_name, (unsigned long long)notify_id, (unsigned int)opcode); - (void)rbd_dev_refresh(rbd_dev); + ret = rbd_dev_refresh(rbd_dev); + if (ret) + rbd_warn(rbd_dev, ": header refresh error (%d)\n", ret); rbd_obj_notify_ack(rbd_dev, notify_id); } @@ -3182,11 +3185,11 @@ static void rbd_exists_validate(struct rbd_device *rbd_dev) static int rbd_dev_refresh(struct rbd_device *rbd_dev) { - u64 image_size; + u64 mapping_size; int ret; rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); - image_size = rbd_dev->header.image_size; + mapping_size = rbd_dev->mapping.size; mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); if (rbd_dev->image_format == 1) ret = rbd_dev_v1_refresh(rbd_dev); @@ -3197,10 +3200,7 @@ static int rbd_dev_refresh(struct rbd_device *rbd_dev) rbd_exists_validate(rbd_dev); mutex_unlock(&ctl_mutex); - if (ret) - rbd_warn(rbd_dev, "got notification but failed to " - " update snaps: %d\n", ret); - if (image_size != rbd_dev->header.image_size) + if (mapping_size != rbd_dev->mapping.size) revalidate_disk(rbd_dev->disk); return ret; @@ -3405,6 +3405,8 @@ static ssize_t rbd_image_refresh(struct device *dev, int ret; ret = rbd_dev_refresh(rbd_dev); + if (ret) + rbd_warn(rbd_dev, ": manual header refresh error (%d)\n", ret); return ret < 0 ? ret : size; } -- cgit v1.2.3 From 00a653e216a8427547774ab3f2cc92709c3e28c9 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 07:40:30 -0500 Subject: rbd: update capacity in rbd_dev_refresh() When a mapped image changes size, we change the capacity recorded for the Linux disk associated with it, in rbd_update_mapping_size(). That function is called in two places--the format 1 and format 2 refresh routines. There is no need to set the capacity while holding the header semaphore. Instead, do it in the common rbd_dev_refresh(), using the logic that's already there to initiate disk revalidation. Add handling in the request function, just in case a request that exceeds the capacity of the device comes in (perhaps one that was started before a refresh shrunk the device). Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 5d5e3f0b5fb4..9c094c67d778 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2874,6 +2874,13 @@ static void rbd_request_fn(struct request_queue *q) goto end_request; /* Shouldn't happen */ } + result = -EIO; + if (offset + length > rbd_dev->mapping.size) { + rbd_warn(rbd_dev, "beyond EOD (%llu~%llu > %llu)\n", + offset, length, rbd_dev->mapping.size); + goto end_request; + } + result = -ENOMEM; img_request = rbd_img_request_create(rbd_dev, offset, length, write_request, false); @@ -3116,14 +3123,8 @@ static void rbd_update_mapping_size(struct rbd_device *rbd_dev) if (rbd_dev->spec->snap_id != CEPH_NOSNAP) return; - if (rbd_dev->mapping.size != rbd_dev->header.image_size) { - sector_t size; - + if (rbd_dev->mapping.size != rbd_dev->header.image_size) rbd_dev->mapping.size = rbd_dev->header.image_size; - size = (sector_t)rbd_dev->mapping.size / SECTOR_SIZE; - dout("setting size to %llu sectors", (unsigned long long)size); - set_capacity(rbd_dev->disk, size); - } } /* @@ -3200,8 +3201,14 @@ static int rbd_dev_refresh(struct rbd_device *rbd_dev) rbd_exists_validate(rbd_dev); mutex_unlock(&ctl_mutex); - if (mapping_size != rbd_dev->mapping.size) + if (mapping_size != rbd_dev->mapping.size) { + sector_t size; + + size = (sector_t)rbd_dev->mapping.size / SECTOR_SIZE; + dout("setting size to %llu sectors", (unsigned long long)size); + set_capacity(rbd_dev->disk, size); revalidate_disk(rbd_dev->disk); + } return ret; } -- cgit v1.2.3 From 29334ba49c3e3defd9a2697cd4a199c597c30dc9 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 07:40:30 -0500 Subject: rbd: kill rbd_update_mapping_size() Since rbd_update_mapping_size() is now a trivial wrapper, just open code it in its two callers. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 9c094c67d778..4c9869545073 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -3118,15 +3118,6 @@ static int rbd_read_header(struct rbd_device *rbd_dev, return ret; } -static void rbd_update_mapping_size(struct rbd_device *rbd_dev) -{ - if (rbd_dev->spec->snap_id != CEPH_NOSNAP) - return; - - if (rbd_dev->mapping.size != rbd_dev->header.image_size) - rbd_dev->mapping.size = rbd_dev->header.image_size; -} - /* * only read the first part of the ondisk header, without the snaps info */ @@ -3143,7 +3134,9 @@ static int rbd_dev_v1_refresh(struct rbd_device *rbd_dev) /* Update image size, and check for resize of mapped image */ rbd_dev->header.image_size = h.image_size; - rbd_update_mapping_size(rbd_dev); + if (rbd_dev->spec->snap_id == CEPH_NOSNAP) + if (rbd_dev->mapping.size != rbd_dev->header.image_size) + rbd_dev->mapping.size = rbd_dev->header.image_size; /* rbd_dev->header.object_prefix shouldn't change */ kfree(rbd_dev->header.snap_sizes); @@ -4074,7 +4067,9 @@ static int rbd_dev_v2_refresh(struct rbd_device *rbd_dev) ret = rbd_dev_v2_image_size(rbd_dev); if (ret) goto out; - rbd_update_mapping_size(rbd_dev); + if (rbd_dev->spec->snap_id == CEPH_NOSNAP) + if (rbd_dev->mapping.size != rbd_dev->header.image_size) + rbd_dev->mapping.size = rbd_dev->header.image_size; ret = rbd_dev_v2_snap_context(rbd_dev); dout("rbd_dev_v2_snap_context returned %d\n", ret); -- cgit v1.2.3 From c734b79655a91a24afcae73738a43a0db09a801a Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 07:40:30 -0500 Subject: rbd: don't print warning if not mapping a parent The presence of the LAYERING bit in an rbd image's feature mask does not guarantee the image actually has a parent image. Currently that bit is set only when a clone (i.e., image with a parent) is created, but it is (currently) not cleared if that clone gets flattened back into a "normal" image. A "parent_id" query will leave the parent_spec for the image being mapped a null pointer, but will not return an error. Currently, whenever an image with the LAYERED feature gets mapped, a warning about the use of layered images gets printed. But we don't want to do this for a flattened image, so print the warning only if we find there is a parent spec after the probe. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 4c9869545073..2d34aea772be 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -4567,13 +4567,14 @@ static int rbd_dev_v2_probe(struct rbd_device *rbd_dev) ret = rbd_dev_v2_parent_info(rbd_dev); if (ret) goto out_err; - /* - * Don't print a warning for parent images. We can - * tell this point because we won't know its pool - * name yet (just its pool id). + * Print a warning if this image has a parent. + * Don't print it if the image now being probed + * is itself a parent. We can tell at this point + * because we won't know its pool name yet (just its + * pool id). */ - if (rbd_dev->spec->pool_name) + if (rbd_dev->parent_spec && rbd_dev->spec->pool_name) rbd_warn(rbd_dev, "WARNING: kernel layering " "is EXPERIMENTAL!"); } -- cgit v1.2.3 From 8f4b7d9821715767ac28bbc2d401bbb5f3f9a448 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 07:40:30 -0500 Subject: rbd: don't look up snapshot id in rbd_dev_mapping_set() Currently rbd_dev_mapping_set() looks up the snapshot id for the snapshot whose name is found in the rbd device's spec structure. That function gets called by rbd_dev_device_setup(), which is called by rbd_add() *after* rbd_dev_image_probe(). If the image probe succeeds, the rbd device's spec will already have been updated to include names and ids for all fields. Therefore there's no need to look up the snapshot id in rbd_dev_mapping_set(). Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 2d34aea772be..75a8cea1a2d0 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -936,20 +936,11 @@ static int rbd_snap_features(struct rbd_device *rbd_dev, u64 snap_id, static int rbd_dev_mapping_set(struct rbd_device *rbd_dev) { - const char *snap_name = rbd_dev->spec->snap_name; - u64 snap_id; + u64 snap_id = rbd_dev->spec->snap_id; u64 size = 0; u64 features = 0; int ret; - if (strcmp(snap_name, RBD_SNAP_HEAD_NAME)) { - snap_id = rbd_snap_id_by_name(rbd_dev, snap_name); - if (snap_id == CEPH_NOSNAP) - return -ENOENT; - } else { - snap_id = CEPH_NOSNAP; - } - ret = rbd_snap_size(rbd_dev, snap_id, &size); if (ret) return ret; -- cgit v1.2.3 From 6d80b130d516deef51666e210fde674c947b8b5c Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 07:40:30 -0500 Subject: rbd: kill rbd_dev_clear_mapping() This function is a duplicate of rbd_dev_mapping_clear(), and was added by mistake. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 75a8cea1a2d0..a62e59a0aea7 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -966,13 +966,6 @@ static void rbd_dev_mapping_clear(struct rbd_device *rbd_dev) rbd_dev->mapping.read_only = true; } -static void rbd_dev_clear_mapping(struct rbd_device *rbd_dev) -{ - rbd_dev->mapping.size = 0; - rbd_dev->mapping.features = 0; - rbd_dev->mapping.read_only = true; -} - static const char *rbd_segment_name(struct rbd_device *rbd_dev, u64 offset) { char *name; @@ -4910,7 +4903,7 @@ static void rbd_dev_device_release(struct device *dev) rbd_free_disk(rbd_dev); clear_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags); - rbd_dev_clear_mapping(rbd_dev); + rbd_dev_mapping_clear(rbd_dev); unregister_blkdev(rbd_dev->major, rbd_dev->name); rbd_dev->major = 0; rbd_dev_id_put(rbd_dev); -- cgit v1.2.3 From 51344a38ba2033be18a4ec23e318845caeccdc04 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 07:40:30 -0500 Subject: rbd: always set read-only flag in rbd_add() Hold off setting the read-only flag in rbd_add() for an image being mapped until we have successfully probed the image. At that point we know whether it's a snapshot mapping or not, so we can set the read-only flag in that one place rather than doing so (for snapshots) in rbd_dev_mapping_set(). To do this, pass a flag to the image probe routine indicating whether we want a read-only mapping. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index a62e59a0aea7..b5cac7931ffc 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -359,7 +359,7 @@ static ssize_t rbd_add(struct bus_type *bus, const char *buf, size_t count); static ssize_t rbd_remove(struct bus_type *bus, const char *buf, size_t count); -static int rbd_dev_image_probe(struct rbd_device *rbd_dev); +static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool read_only); static struct bus_attribute rbd_bus_attrs[] = { __ATTR(add, S_IWUSR, NULL, rbd_add), @@ -951,11 +951,6 @@ static int rbd_dev_mapping_set(struct rbd_device *rbd_dev) rbd_dev->mapping.size = size; rbd_dev->mapping.features = features; - /* If we are mapping a snapshot it must be marked read-only */ - - if (snap_id != CEPH_NOSNAP) - rbd_dev->mapping.read_only = true; - return 0; } @@ -963,7 +958,6 @@ static void rbd_dev_mapping_clear(struct rbd_device *rbd_dev) { rbd_dev->mapping.size = 0; rbd_dev->mapping.features = 0; - rbd_dev->mapping.read_only = true; } static const char *rbd_segment_name(struct rbd_device *rbd_dev, u64 offset) @@ -4620,7 +4614,7 @@ static int rbd_dev_probe_parent(struct rbd_device *rbd_dev) if (!parent) goto out_err; - ret = rbd_dev_image_probe(parent); + ret = rbd_dev_image_probe(parent, true); if (ret < 0) goto out_err; rbd_dev->parent = parent; @@ -4743,7 +4737,7 @@ static void rbd_dev_image_release(struct rbd_device *rbd_dev) * device. For format 2 images this includes determining the image * id. */ -static int rbd_dev_image_probe(struct rbd_device *rbd_dev) +static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool read_only) { int ret; int tmp; @@ -4778,6 +4772,12 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev) if (ret) goto err_out_probe; + /* If we are mapping a snapshot it must be marked read-only */ + + if (rbd_dev->spec->snap_id != CEPH_NOSNAP) + read_only = true; + rbd_dev->mapping.read_only = read_only; + ret = rbd_dev_probe_parent(rbd_dev); if (!ret) return 0; @@ -4811,6 +4811,7 @@ static ssize_t rbd_add(struct bus_type *bus, struct rbd_spec *spec = NULL; struct rbd_client *rbdc; struct ceph_osd_client *osdc; + bool read_only; int rc = -ENOMEM; if (!try_module_get(THIS_MODULE)) @@ -4820,6 +4821,9 @@ static ssize_t rbd_add(struct bus_type *bus, rc = rbd_add_parse_args(buf, &ceph_opts, &rbd_opts, &spec); if (rc < 0) goto err_out_module; + read_only = rbd_opts->read_only; + kfree(rbd_opts); + rbd_opts = NULL; /* done with this */ rbdc = rbd_get_client(ceph_opts); if (IS_ERR(rbdc)) { @@ -4850,11 +4854,7 @@ static ssize_t rbd_add(struct bus_type *bus, rbdc = NULL; /* rbd_dev now owns this */ spec = NULL; /* rbd_dev now owns this */ - rbd_dev->mapping.read_only = rbd_opts->read_only; - kfree(rbd_opts); - rbd_opts = NULL; /* done with this */ - - rc = rbd_dev_image_probe(rbd_dev); + rc = rbd_dev_image_probe(rbd_dev, read_only); if (rc < 0) goto err_out_rbd_dev; -- cgit v1.2.3 From 73b82bf0bfbf58e6ff328d3726934370585f6e78 Mon Sep 17 00:00:00 2001 From: Thommy Jakobsson Date: Tue, 23 Apr 2013 21:45:11 +0200 Subject: B43: Handle DMA RX descriptor underrun Add handling of rx descriptor underflow. This fixes a fault that could happen on slow machines, where data is received faster than the CPU can handle. In such a case the device will use up all rx descriptors and refuse to send any more data before confirming that it is ok. This patch enables necessary interrupt to discover such a situation and will handle them by dropping everything in the ring buffer. Reviewed-by: Michael Buesch Signed-off-by: Thommy Jakobsson Cc: stable Signed-off-by: John W. Linville --- drivers/net/wireless/b43/dma.c | 19 ++++++++++++++++++ drivers/net/wireless/b43/dma.h | 4 +++- drivers/net/wireless/b43/main.c | 43 +++++++++++++++++------------------------ 3 files changed, 40 insertions(+), 26 deletions(-) diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 122146943bf2..ee3d6403c795 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1733,6 +1733,25 @@ drop_recycle_buffer: sync_descbuffer_for_device(ring, dmaaddr, ring->rx_buffersize); } +void b43_dma_handle_rx_overflow(struct b43_dmaring *ring) +{ + int current_slot, previous_slot; + + B43_WARN_ON(ring->tx); + + /* Device has filled all buffers, drop all packets and let TCP + * decrease speed. + * Decrement RX index by one will let the device to see all slots + * as free again + */ + /* + *TODO: How to increase rx_drop in mac80211? + */ + current_slot = ring->ops->get_current_rxslot(ring); + previous_slot = prev_slot(ring, current_slot); + ring->ops->set_current_rxslot(ring, previous_slot); +} + void b43_dma_rx(struct b43_dmaring *ring) { const struct b43_dma_ops *ops = ring->ops; diff --git a/drivers/net/wireless/b43/dma.h b/drivers/net/wireless/b43/dma.h index 9fdd1983079c..df8c8cdcbdb5 100644 --- a/drivers/net/wireless/b43/dma.h +++ b/drivers/net/wireless/b43/dma.h @@ -9,7 +9,7 @@ /* DMA-Interrupt reasons. */ #define B43_DMAIRQ_FATALMASK ((1 << 10) | (1 << 11) | (1 << 12) \ | (1 << 14) | (1 << 15)) -#define B43_DMAIRQ_NONFATALMASK (1 << 13) +#define B43_DMAIRQ_RDESC_UFLOW (1 << 13) #define B43_DMAIRQ_RX_DONE (1 << 16) /*** 32-bit DMA Engine. ***/ @@ -295,6 +295,8 @@ int b43_dma_tx(struct b43_wldev *dev, void b43_dma_handle_txstatus(struct b43_wldev *dev, const struct b43_txstatus *status); +void b43_dma_handle_rx_overflow(struct b43_dmaring *ring); + void b43_dma_rx(struct b43_dmaring *ring); void b43_dma_direct_fifo_rx(struct b43_wldev *dev, diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index d377f77d30b5..6dd07e2ec595 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -1902,30 +1902,18 @@ static void b43_do_interrupt_thread(struct b43_wldev *dev) } } - if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK | - B43_DMAIRQ_NONFATALMASK))) { - if (merged_dma_reason & B43_DMAIRQ_FATALMASK) { - b43err(dev->wl, "Fatal DMA error: " - "0x%08X, 0x%08X, 0x%08X, " - "0x%08X, 0x%08X, 0x%08X\n", - dma_reason[0], dma_reason[1], - dma_reason[2], dma_reason[3], - dma_reason[4], dma_reason[5]); - b43err(dev->wl, "This device does not support DMA " + if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK))) { + b43err(dev->wl, + "Fatal DMA error: 0x%08X, 0x%08X, 0x%08X, 0x%08X, 0x%08X, 0x%08X\n", + dma_reason[0], dma_reason[1], + dma_reason[2], dma_reason[3], + dma_reason[4], dma_reason[5]); + b43err(dev->wl, "This device does not support DMA " "on your system. It will now be switched to PIO.\n"); - /* Fall back to PIO transfers if we get fatal DMA errors! */ - dev->use_pio = true; - b43_controller_restart(dev, "DMA error"); - return; - } - if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) { - b43err(dev->wl, "DMA error: " - "0x%08X, 0x%08X, 0x%08X, " - "0x%08X, 0x%08X, 0x%08X\n", - dma_reason[0], dma_reason[1], - dma_reason[2], dma_reason[3], - dma_reason[4], dma_reason[5]); - } + /* Fall back to PIO transfers if we get fatal DMA errors! */ + dev->use_pio = true; + b43_controller_restart(dev, "DMA error"); + return; } if (unlikely(reason & B43_IRQ_UCODE_DEBUG)) @@ -1944,6 +1932,11 @@ static void b43_do_interrupt_thread(struct b43_wldev *dev) handle_irq_noise(dev); /* Check the DMA reason registers for received data. */ + if (dma_reason[0] & B43_DMAIRQ_RDESC_UFLOW) { + if (B43_DEBUG) + b43warn(dev->wl, "RX descriptor underrun\n"); + b43_dma_handle_rx_overflow(dev->dma.rx_ring); + } if (dma_reason[0] & B43_DMAIRQ_RX_DONE) { if (b43_using_pio_transfers(dev)) b43_pio_rx(dev->pio.rx_queue); @@ -2001,7 +1994,7 @@ static irqreturn_t b43_do_interrupt(struct b43_wldev *dev) return IRQ_NONE; dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON) - & 0x0001DC00; + & 0x0001FC00; dev->dma_reason[1] = b43_read32(dev, B43_MMIO_DMA1_REASON) & 0x0000DC00; dev->dma_reason[2] = b43_read32(dev, B43_MMIO_DMA2_REASON) @@ -3130,7 +3123,7 @@ static int b43_chip_init(struct b43_wldev *dev) b43_write32(dev, 0x018C, 0x02000000); } b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 0x00004000); - b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001DC00); + b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001FC00); b43_write32(dev, B43_MMIO_DMA1_IRQ_MASK, 0x0000DC00); b43_write32(dev, B43_MMIO_DMA2_IRQ_MASK, 0x0000DC00); b43_write32(dev, B43_MMIO_DMA3_IRQ_MASK, 0x0001DC00); -- cgit v1.2.3 From dd9c46408fdc07098333655ff27edf8cac8d9fcf Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 7 May 2013 18:07:06 +0200 Subject: iwl4965: workaround connection regression on passive channel Jake reported that since commit 1672c0e31917f49d31d30d79067103432bc20cc7 "mac80211: start auth/assoc timeout on frame status", he is unable to connect to his AP, which is configured to use passive channel. After switch to passive channel 4965 firmware drops any TX packet until it receives beacon. Before commit 1672c0e3 we waited on channel and retransmit packet after 200ms, that makes we receive beacon on the meantime and association process succeed. New mac80211 behaviour cause that any ASSOC frame fail immediately on iwl4965 and we can not associate. This patch restore old mac80211 behaviour for iwl4965, by removing IEEE80211_HW_REPORTS_TX_ACK_STATUS feature. This feature will be added again to iwl4965 driver, when different, more complex workaround for this firmware issue, will be added to the driver. Cc: stable@vger.kernel.org # 3.9 Bisected-by: Jake Edge Reported-and-tested-by: Jake Edge Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/4965-mac.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index 431ae6cc5f8f..289701e814c7 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -5741,8 +5741,7 @@ il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length) hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_AMPDU_AGGREGATION | IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SPECTRUM_MGMT | - IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_SUPPORTS_DYNAMIC_PS; + IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS; if (il->cfg->sku & IL_SKU_N) hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | -- cgit v1.2.3 From a67682804165c428d5fd52c1a70fcd2a7502c056 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 6 May 2013 10:09:03 +0530 Subject: ath9k: Fix beacon reconfiguration When a reset or a channel-change happens, for managed mode, the HW beacon timers have to be programmed after the TSF has been synchronized. This is handled via the sync flags. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index c4fc3d14ea62..a18414b5948b 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -227,13 +227,13 @@ static bool ath_complete_reset(struct ath_softc *sc, bool start) if (!test_bit(SC_OP_BEACONS, &sc->sc_flags)) goto work; - ath9k_set_beacon(sc); - if (ah->opmode == NL80211_IFTYPE_STATION && test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) { spin_lock_irqsave(&sc->sc_pm_lock, flags); sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON; spin_unlock_irqrestore(&sc->sc_pm_lock, flags); + } else { + ath9k_set_beacon(sc); } work: ath_restart_work(sc); -- cgit v1.2.3 From f0fb6af2918ea6b6f781f7d598d7cd72cea28915 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 6 May 2013 10:09:33 +0530 Subject: ath9k: Update initvals for AR9565 * Register Modification for xLNA board. * TX gain table modification for zero calibration. * AUX chain (LNA2) sensitivity enhancement * Modify diversity bias default setting in INI. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- .../net/wireless/ath/ath9k/ar9565_1p0_initvals.h | 138 +++++++++++---------- 1 file changed, 70 insertions(+), 68 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h index 0c2ac0c6dc89..e85a8b076c22 100644 --- a/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h @@ -233,9 +233,9 @@ static const u32 ar9565_1p0_baseband_core[][2] = { {0x00009d10, 0x01834061}, {0x00009d14, 0x00c00400}, {0x00009d18, 0x00000000}, - {0x00009e08, 0x0078230c}, - {0x00009e24, 0x990bb515}, - {0x00009e28, 0x126f0000}, + {0x00009e08, 0x0038230c}, + {0x00009e24, 0x9907b515}, + {0x00009e28, 0x126f0600}, {0x00009e30, 0x06336f77}, {0x00009e34, 0x6af6532f}, {0x00009e38, 0x0cc80c00}, @@ -337,7 +337,7 @@ static const u32 ar9565_1p0_baseband_core[][2] = { static const u32 ar9565_1p0_baseband_postamble[][5] = { /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ - {0x00009810, 0xd00a8005, 0xd00a8005, 0xd00a8005, 0xd00a800d}, + {0x00009810, 0xd00a8005, 0xd00a8005, 0xd00a8005, 0xd00a8009}, {0x00009820, 0x206a022e, 0x206a022e, 0x206a012e, 0x206a01ae}, {0x00009824, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x63c640da}, {0x00009828, 0x06903081, 0x06903081, 0x06903881, 0x09143c81}, @@ -345,9 +345,9 @@ static const u32 ar9565_1p0_baseband_postamble[][5] = { {0x00009830, 0x0000059c, 0x0000059c, 0x0000059c, 0x0000059c}, {0x00009c00, 0x000000c4, 0x000000c4, 0x000000c4, 0x000000c4}, {0x00009e00, 0x0372111a, 0x0372111a, 0x037216a0, 0x037216a0}, - {0x00009e04, 0x00802020, 0x00802020, 0x00802020, 0x00802020}, - {0x00009e0c, 0x6c4000e2, 0x6d4000e2, 0x6d4000e2, 0x6c4000d8}, - {0x00009e10, 0x7ec88d2e, 0x7ec88d2e, 0x7ec84d2e, 0x7ec86d2e}, + {0x00009e04, 0x00802020, 0x00802020, 0x00142020, 0x00142020}, + {0x00009e0c, 0x6c4000e2, 0x6d4000e2, 0x6d4000e2, 0x6c4000e2}, + {0x00009e10, 0x7ec88d2e, 0x7ec88d2e, 0x7ec84d2e, 0x7ec84d2e}, {0x00009e14, 0x37b95d5e, 0x37b9605e, 0x3379605e, 0x33795d5e}, {0x00009e18, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c}, @@ -450,6 +450,8 @@ static const u32 ar9565_1p0_soc_postamble[][5] = { static const u32 ar9565_1p0_Common_rx_gain_table[][2] = { /* Addr allmodes */ + {0x00004050, 0x00300300}, + {0x0000406c, 0x00100000}, {0x0000a000, 0x00010000}, {0x0000a004, 0x00030002}, {0x0000a008, 0x00050004}, @@ -498,27 +500,27 @@ static const u32 ar9565_1p0_Common_rx_gain_table[][2] = { {0x0000a0b4, 0x00000000}, {0x0000a0b8, 0x00000000}, {0x0000a0bc, 0x00000000}, - {0x0000a0c0, 0x001f0000}, - {0x0000a0c4, 0x01000101}, - {0x0000a0c8, 0x011e011f}, - {0x0000a0cc, 0x011c011d}, - {0x0000a0d0, 0x02030204}, - {0x0000a0d4, 0x02010202}, - {0x0000a0d8, 0x021f0200}, - {0x0000a0dc, 0x0302021e}, - {0x0000a0e0, 0x03000301}, - {0x0000a0e4, 0x031e031f}, - {0x0000a0e8, 0x0402031d}, - {0x0000a0ec, 0x04000401}, - {0x0000a0f0, 0x041e041f}, - {0x0000a0f4, 0x0502041d}, - {0x0000a0f8, 0x05000501}, - {0x0000a0fc, 0x051e051f}, - {0x0000a100, 0x06010602}, - {0x0000a104, 0x061f0600}, - {0x0000a108, 0x061d061e}, - {0x0000a10c, 0x07020703}, - {0x0000a110, 0x07000701}, + {0x0000a0c0, 0x00bf00a0}, + {0x0000a0c4, 0x11a011a1}, + {0x0000a0c8, 0x11be11bf}, + {0x0000a0cc, 0x11bc11bd}, + {0x0000a0d0, 0x22632264}, + {0x0000a0d4, 0x22612262}, + {0x0000a0d8, 0x227f2260}, + {0x0000a0dc, 0x4322227e}, + {0x0000a0e0, 0x43204321}, + {0x0000a0e4, 0x433e433f}, + {0x0000a0e8, 0x4462433d}, + {0x0000a0ec, 0x44604461}, + {0x0000a0f0, 0x447e447f}, + {0x0000a0f4, 0x5582447d}, + {0x0000a0f8, 0x55805581}, + {0x0000a0fc, 0x559e559f}, + {0x0000a100, 0x66816682}, + {0x0000a104, 0x669f6680}, + {0x0000a108, 0x669d669e}, + {0x0000a10c, 0x77627763}, + {0x0000a110, 0x77607761}, {0x0000a114, 0x00000000}, {0x0000a118, 0x00000000}, {0x0000a11c, 0x00000000}, @@ -530,27 +532,27 @@ static const u32 ar9565_1p0_Common_rx_gain_table[][2] = { {0x0000a134, 0x00000000}, {0x0000a138, 0x00000000}, {0x0000a13c, 0x00000000}, - {0x0000a140, 0x001f0000}, - {0x0000a144, 0x01000101}, - {0x0000a148, 0x011e011f}, - {0x0000a14c, 0x011c011d}, - {0x0000a150, 0x02030204}, - {0x0000a154, 0x02010202}, - {0x0000a158, 0x021f0200}, - {0x0000a15c, 0x0302021e}, - {0x0000a160, 0x03000301}, - {0x0000a164, 0x031e031f}, - {0x0000a168, 0x0402031d}, - {0x0000a16c, 0x04000401}, - {0x0000a170, 0x041e041f}, - {0x0000a174, 0x0502041d}, - {0x0000a178, 0x05000501}, - {0x0000a17c, 0x051e051f}, - {0x0000a180, 0x06010602}, - {0x0000a184, 0x061f0600}, - {0x0000a188, 0x061d061e}, - {0x0000a18c, 0x07020703}, - {0x0000a190, 0x07000701}, + {0x0000a140, 0x00bf00a0}, + {0x0000a144, 0x11a011a1}, + {0x0000a148, 0x11be11bf}, + {0x0000a14c, 0x11bc11bd}, + {0x0000a150, 0x22632264}, + {0x0000a154, 0x22612262}, + {0x0000a158, 0x227f2260}, + {0x0000a15c, 0x4322227e}, + {0x0000a160, 0x43204321}, + {0x0000a164, 0x433e433f}, + {0x0000a168, 0x4462433d}, + {0x0000a16c, 0x44604461}, + {0x0000a170, 0x447e447f}, + {0x0000a174, 0x5582447d}, + {0x0000a178, 0x55805581}, + {0x0000a17c, 0x559e559f}, + {0x0000a180, 0x66816682}, + {0x0000a184, 0x669f6680}, + {0x0000a188, 0x669d669e}, + {0x0000a18c, 0x77e677e7}, + {0x0000a190, 0x77e477e5}, {0x0000a194, 0x00000000}, {0x0000a198, 0x00000000}, {0x0000a19c, 0x00000000}, @@ -770,7 +772,7 @@ static const u32 ar9565_1p0_Modes_lowest_ob_db_tx_gain_table[][5] = { static const u32 ar9565_1p0_pciephy_clkreq_disable_L1[][2] = { /* Addr allmodes */ - {0x00018c00, 0x18213ede}, + {0x00018c00, 0x18212ede}, {0x00018c04, 0x000801d8}, {0x00018c08, 0x0003780c}, }; @@ -889,8 +891,8 @@ static const u32 ar9565_1p0_common_wo_xlna_rx_gain_table[][2] = { {0x0000a180, 0x66816682}, {0x0000a184, 0x669f6680}, {0x0000a188, 0x669d669e}, - {0x0000a18c, 0x77627763}, - {0x0000a190, 0x77607761}, + {0x0000a18c, 0x77e677e7}, + {0x0000a190, 0x77e477e5}, {0x0000a194, 0x00000000}, {0x0000a198, 0x00000000}, {0x0000a19c, 0x00000000}, @@ -1114,7 +1116,7 @@ static const u32 ar9565_1p0_modes_high_ob_db_tx_gain_table[][5] = { {0x0000a2e0, 0xffecec00, 0xffecec00, 0xfd339c84, 0xfd339c84}, {0x0000a2e4, 0xfc0f0000, 0xfc0f0000, 0xfec3e000, 0xfec3e000}, {0x0000a2e8, 0xfc100000, 0xfc100000, 0xfffc0000, 0xfffc0000}, - {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050df, 0x000050df}, {0x0000a500, 0x00002220, 0x00002220, 0x00000000, 0x00000000}, {0x0000a504, 0x06002223, 0x06002223, 0x04000002, 0x04000002}, {0x0000a508, 0x0b022220, 0x0b022220, 0x08000004, 0x08000004}, @@ -1140,13 +1142,13 @@ static const u32 ar9565_1p0_modes_high_ob_db_tx_gain_table[][5] = { {0x0000a558, 0x69027f56, 0x69027f56, 0x53001ce5, 0x53001ce5}, {0x0000a55c, 0x6d029f56, 0x6d029f56, 0x57001ce9, 0x57001ce9}, {0x0000a560, 0x73049f56, 0x73049f56, 0x5b001ceb, 0x5b001ceb}, - {0x0000a564, 0x7804ff56, 0x7804ff56, 0x5d001eec, 0x5d001eec}, - {0x0000a568, 0x7804ff56, 0x7804ff56, 0x5d001eec, 0x5d001eec}, - {0x0000a56c, 0x7804ff56, 0x7804ff56, 0x5d001eec, 0x5d001eec}, - {0x0000a570, 0x7804ff56, 0x7804ff56, 0x5d001eec, 0x5d001eec}, - {0x0000a574, 0x7804ff56, 0x7804ff56, 0x5d001eec, 0x5d001eec}, - {0x0000a578, 0x7804ff56, 0x7804ff56, 0x5d001eec, 0x5d001eec}, - {0x0000a57c, 0x7804ff56, 0x7804ff56, 0x5d001eec, 0x5d001eec}, + {0x0000a564, 0x7804ff56, 0x7804ff56, 0x60001cf0, 0x60001cf0}, + {0x0000a568, 0x7804ff56, 0x7804ff56, 0x61001cf1, 0x61001cf1}, + {0x0000a56c, 0x7804ff56, 0x7804ff56, 0x62001cf2, 0x62001cf2}, + {0x0000a570, 0x7804ff56, 0x7804ff56, 0x63001cf3, 0x63001cf3}, + {0x0000a574, 0x7804ff56, 0x7804ff56, 0x64001cf4, 0x64001cf4}, + {0x0000a578, 0x7804ff56, 0x7804ff56, 0x66001ff6, 0x66001ff6}, + {0x0000a57c, 0x7804ff56, 0x7804ff56, 0x66001ff6, 0x66001ff6}, {0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, @@ -1174,7 +1176,7 @@ static const u32 ar9565_1p0_modes_high_power_tx_gain_table[][5] = { {0x0000a2e0, 0xffecec00, 0xffecec00, 0xfd339c84, 0xfd339c84}, {0x0000a2e4, 0xfc0f0000, 0xfc0f0000, 0xfec3e000, 0xfec3e000}, {0x0000a2e8, 0xfc100000, 0xfc100000, 0xfffc0000, 0xfffc0000}, - {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050df, 0x000050df}, {0x0000a500, 0x00002220, 0x00002220, 0x00000000, 0x00000000}, {0x0000a504, 0x06002223, 0x06002223, 0x04000002, 0x04000002}, {0x0000a508, 0x0a022220, 0x0a022220, 0x08000004, 0x08000004}, @@ -1200,13 +1202,13 @@ static const u32 ar9565_1p0_modes_high_power_tx_gain_table[][5] = { {0x0000a558, 0x66027f56, 0x66027f56, 0x4c001ce5, 0x4c001ce5}, {0x0000a55c, 0x6a029f56, 0x6a029f56, 0x50001ce9, 0x50001ce9}, {0x0000a560, 0x70049f56, 0x70049f56, 0x54001ceb, 0x54001ceb}, - {0x0000a564, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec}, - {0x0000a568, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec}, - {0x0000a56c, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec}, - {0x0000a570, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec}, - {0x0000a574, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec}, - {0x0000a578, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec}, - {0x0000a57c, 0x7504ff56, 0x7504ff56, 0x56001eec, 0x56001eec}, + {0x0000a564, 0x7504ff56, 0x7504ff56, 0x59001cf0, 0x59001cf0}, + {0x0000a568, 0x7504ff56, 0x7504ff56, 0x5a001cf1, 0x5a001cf1}, + {0x0000a56c, 0x7504ff56, 0x7504ff56, 0x5b001cf2, 0x5b001cf2}, + {0x0000a570, 0x7504ff56, 0x7504ff56, 0x5c001cf3, 0x5c001cf3}, + {0x0000a574, 0x7504ff56, 0x7504ff56, 0x5d001cf4, 0x5d001cf4}, + {0x0000a578, 0x7504ff56, 0x7504ff56, 0x5f001ff6, 0x5f001ff6}, + {0x0000a57c, 0x7504ff56, 0x7504ff56, 0x5f001ff6, 0x5f001ff6}, {0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, -- cgit v1.2.3 From 48795424acff7215d5eac0b52793a2c1eb3a6283 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Mon, 6 May 2013 19:46:53 -0700 Subject: mwifiex: clear is_suspended flag when interrupt is received early When the XO-4 with 8787 wireless is woken up due to wake-on-WLAN mwifiex is often flooded with "not allowed while suspended" messages and the interface is unusable. [ 202.171609] int: sdio_ireg = 0x1 [ 202.180700] info: mwifiex_process_hs_config: auto cancelling host sleep since there is interrupt from the firmware [ 202.201880] event: wakeup device... [ 202.211452] event: hs_deactivated [ 202.514638] info: --- Rx: Data packet --- [ 202.514753] data: 4294957544 BSS(0-0): Data <= kernel [ 202.514825] PREP_CMD: device in suspended state [ 202.514839] data: dequeuing the packet ec7248c0 ec4869c0 [ 202.514886] mwifiex_write_data_sync: not allowed while suspended [ 202.514886] host_to_card, write iomem (1) failed: -1 [ 202.514917] mwifiex_write_data_sync: not allowed while suspended [ 202.514936] host_to_card, write iomem (2) failed: -1 [ 202.514949] mwifiex_write_data_sync: not allowed while suspended [ 202.514965] host_to_card, write iomem (3) failed: -1 [ 202.514976] mwifiex_write_data_async failed: 0xFFFFFFFF This can be readily reproduced when putting the XO-4 in a loop where it goes to sleep due to inactivity, but then wakes up due to an incoming ping. The error is hit within an hour or two. This issue happens when an interrupt comes in early while host sleep is still activated. Driver handles this case by auto cancelling host sleep. However is_suspended flag is still set which prevents any cmd or data from being sent to firmware. Fix it by clearing is_suspended flag in this path. Cc: Reported-by: Daniel Drake Tested-by: Daniel Drake Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cmdevt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c index 74db0d24a579..26755d9acb55 100644 --- a/drivers/net/wireless/mwifiex/cmdevt.c +++ b/drivers/net/wireless/mwifiex/cmdevt.c @@ -1191,6 +1191,7 @@ mwifiex_process_hs_config(struct mwifiex_adapter *adapter) adapter->if_ops.wakeup(adapter); adapter->hs_activated = false; adapter->is_hs_configured = false; + adapter->is_suspended = false; mwifiex_hs_activated_event(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY), false); -- cgit v1.2.3 From f16fdc9d2dc1e5b270e9a08377587e831e0d36ac Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Mon, 6 May 2013 19:46:54 -0700 Subject: mwifiex: fix memory leak issue when driver unload After unregister_netdevice() call the request is queued and reg_state is changed to NETREG_UNREGISTERING. As we check for NETREG_UNREGISTERED state, free_netdev() never gets executed causing memory leak. Initialize "dev->destructor" to free_netdev() to free device data after unregistration. Cc: Reported-by: Daniel Drake Tested-by: Daniel Drake Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 3 --- drivers/net/wireless/mwifiex/main.c | 1 + 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index a0cb0770d319..636145d1708b 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -2234,9 +2234,6 @@ int mwifiex_del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev) if (wdev->netdev->reg_state == NETREG_REGISTERED) unregister_netdevice(wdev->netdev); - if (wdev->netdev->reg_state == NETREG_UNREGISTERED) - free_netdev(wdev->netdev); - /* Clear the priv in adapter */ priv->netdev = NULL; diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c index 121443a0f2a1..2eb88ea9acf7 100644 --- a/drivers/net/wireless/mwifiex/main.c +++ b/drivers/net/wireless/mwifiex/main.c @@ -655,6 +655,7 @@ void mwifiex_init_priv_params(struct mwifiex_private *priv, struct net_device *dev) { dev->netdev_ops = &mwifiex_netdev_ops; + dev->destructor = free_netdev; /* Initialize private structure */ priv->current_key_index = 0; priv->media_connected = false; -- cgit v1.2.3 From ccd384b10420ac81ba3fb9b0a7d18272c7173552 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Wed, 8 May 2013 15:37:19 -0400 Subject: mwifiex: fix setting of multicast filter A small bug in this code was causing the ALLMULTI filter to be set when in fact we were just wanting to program a selective multicast list to the hardware. Fix that bug and remove a redundant if condition in the code that follows. This fixes wakeup behaviour when multicast WOL is enabled. Previously, all multicast packets would wake up the system. Now, only those that the host intended to receive trigger wakeups. Signed-off-by: Daniel Drake Cc: Acked-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/sta_ioctl.c | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index 311d0b26b81c..1a8a19dbd635 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -96,7 +96,7 @@ int mwifiex_request_set_multicast_list(struct mwifiex_private *priv, } else { /* Multicast */ priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_PROMISCUOUS_ENABLE; - if (mcast_list->mode == MWIFIEX_MULTICAST_MODE) { + if (mcast_list->mode == MWIFIEX_ALL_MULTI_MODE) { dev_dbg(priv->adapter->dev, "info: Enabling All Multicast!\n"); priv->curr_pkt_filter |= @@ -108,20 +108,11 @@ int mwifiex_request_set_multicast_list(struct mwifiex_private *priv, dev_dbg(priv->adapter->dev, "info: Set multicast list=%d\n", mcast_list->num_multicast_addr); - /* Set multicast addresses to firmware */ - if (old_pkt_filter == priv->curr_pkt_filter) { - /* Send request to firmware */ - ret = mwifiex_send_cmd_async(priv, - HostCmd_CMD_MAC_MULTICAST_ADR, - HostCmd_ACT_GEN_SET, 0, - mcast_list); - } else { - /* Send request to firmware */ - ret = mwifiex_send_cmd_async(priv, - HostCmd_CMD_MAC_MULTICAST_ADR, - HostCmd_ACT_GEN_SET, 0, - mcast_list); - } + /* Send multicast addresses to firmware */ + ret = mwifiex_send_cmd_async(priv, + HostCmd_CMD_MAC_MULTICAST_ADR, + HostCmd_ACT_GEN_SET, 0, + mcast_list); } } } -- cgit v1.2.3 From f35a4dee14c31dc00807f3bcd59cc7a6959f63d7 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 09:51:29 -0500 Subject: rbd: set the mapping size and features later Defer setting the size and features fields of a mapped image until after the Linux disk structure is set up. Set the capacity of the disk after that. Rearrange the definition of rbd_image_header, separating the fields that are set only once from those that can be updated. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index b5cac7931ffc..a05b6e5dc362 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -100,21 +100,20 @@ * block device image metadata (in-memory version) */ struct rbd_image_header { - /* These four fields never change for a given rbd image */ + /* These six fields never change for a given rbd image */ char *object_prefix; - u64 features; __u8 obj_order; __u8 crypt_type; __u8 comp_type; + u64 stripe_unit; + u64 stripe_count; + u64 features; /* Might be changeable someday? */ /* The remaining fields need to be updated occasionally */ u64 image_size; struct ceph_snap_context *snapc; - char *snap_names; - u64 *snap_sizes; - - u64 stripe_unit; - u64 stripe_count; + char *snap_names; /* format 1 only */ + u64 *snap_sizes; /* format 1 only */ }; /* @@ -4637,10 +4636,6 @@ static int rbd_dev_device_setup(struct rbd_device *rbd_dev) { int ret; - ret = rbd_dev_mapping_set(rbd_dev); - if (ret) - return ret; - /* generate unique id: find highest unique id, add one */ rbd_dev_id_get(rbd_dev); @@ -4662,13 +4657,17 @@ static int rbd_dev_device_setup(struct rbd_device *rbd_dev) if (ret) goto err_out_blkdev; - ret = rbd_bus_add_dev(rbd_dev); + ret = rbd_dev_mapping_set(rbd_dev); if (ret) goto err_out_disk; + set_capacity(rbd_dev->disk, rbd_dev->mapping.size / SECTOR_SIZE); + + ret = rbd_bus_add_dev(rbd_dev); + if (ret) + goto err_out_mapping; /* Everything's ready. Announce the disk to the world. */ - set_capacity(rbd_dev->disk, rbd_dev->mapping.size / SECTOR_SIZE); set_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags); add_disk(rbd_dev->disk); @@ -4677,6 +4676,8 @@ static int rbd_dev_device_setup(struct rbd_device *rbd_dev) return ret; +err_out_mapping: + rbd_dev_mapping_clear(rbd_dev); err_out_disk: rbd_free_disk(rbd_dev); err_out_blkdev: -- cgit v1.2.3 From 46578dcdca951f3da70d3a5a9b5166b2a492a182 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 09:51:29 -0500 Subject: rbd: zero format 1 header structure earlier The passed-in header structure is zeroed in rbd_header_from_disk(). Instead, have the caller do it. Note that there are two callers, rbd_dev_v1_refresh() and rbd_dev_v1_probe(). The latter already has a zeroed header structure so zeroing it isn't necessary there. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index a05b6e5dc362..b0fbc38cc6f0 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -738,8 +738,6 @@ static int rbd_header_from_disk(struct rbd_image_header *header, size_t size; u32 i; - memset(header, 0, sizeof (*header)); - snap_count = le32_to_cpu(ondisk->snap_count); len = strnlen(ondisk->object_prefix, sizeof (ondisk->object_prefix)); @@ -3103,6 +3101,7 @@ static int rbd_dev_v1_refresh(struct rbd_device *rbd_dev) int ret; struct rbd_image_header h; + memset(&h, 0, sizeof (h)); ret = rbd_read_header(rbd_dev, &h); if (ret < 0) return ret; -- cgit v1.2.3 From bb23e37acb2ae9604130c4819fb8ae0f784a3a2b Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 09:51:29 -0500 Subject: rbd: refactor rbd_header_from_disk() This rearranges rbd_header_from_disk so that it: - allocates the snapshot context right away - keeps results in local variables, not changing the passed-in header until it's known we'll succeed - does initialization of set-once fields in a header only if they have not already been set The last point is moot at the moment, because rbd_read_header() (the only caller) always supplies a zero-filled header buffer. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 127 +++++++++++++++++++++++++++++++--------------------- 1 file changed, 75 insertions(+), 52 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index b0fbc38cc6f0..a3b6bf5e9ae8 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -727,86 +727,109 @@ static bool rbd_dev_ondisk_valid(struct rbd_image_header_ondisk *ondisk) } /* - * Create a new header structure, translate header format from the on-disk - * header. + * Fill an rbd image header with information from the given format 1 + * on-disk header. */ static int rbd_header_from_disk(struct rbd_image_header *header, struct rbd_image_header_ondisk *ondisk) { + bool first_time = header->object_prefix == NULL; + struct ceph_snap_context *snapc; + char *object_prefix = NULL; + char *snap_names = NULL; + u64 *snap_sizes = NULL; u32 snap_count; - size_t len; size_t size; + int ret = -ENOMEM; u32 i; - snap_count = le32_to_cpu(ondisk->snap_count); + /* Allocate this now to avoid having to handle failure below */ - len = strnlen(ondisk->object_prefix, sizeof (ondisk->object_prefix)); - header->object_prefix = kmalloc(len + 1, GFP_KERNEL); - if (!header->object_prefix) - return -ENOMEM; - memcpy(header->object_prefix, ondisk->object_prefix, len); - header->object_prefix[len] = '\0'; + if (first_time) { + size_t len; + len = strnlen(ondisk->object_prefix, + sizeof (ondisk->object_prefix)); + object_prefix = kmalloc(len + 1, GFP_KERNEL); + if (!object_prefix) + return -ENOMEM; + memcpy(object_prefix, ondisk->object_prefix, len); + object_prefix[len] = '\0'; + } + + /* Allocate the snapshot context and fill it in */ + + snap_count = le32_to_cpu(ondisk->snap_count); + snapc = ceph_create_snap_context(snap_count, GFP_KERNEL); + if (!snapc) + goto out_err; + snapc->seq = le64_to_cpu(ondisk->snap_seq); if (snap_count) { + struct rbd_image_snap_ondisk *snaps; u64 snap_names_len = le64_to_cpu(ondisk->snap_names_len); - /* Save a copy of the snapshot names */ + /* We'll keep a copy of the snapshot names... */ - if (snap_names_len > (u64) SIZE_MAX) - return -EIO; - header->snap_names = kmalloc(snap_names_len, GFP_KERNEL); - if (!header->snap_names) + if (snap_names_len > (u64)SIZE_MAX) + goto out_2big; + snap_names = kmalloc(snap_names_len, GFP_KERNEL); + if (!snap_names) goto out_err; - /* - * Note that rbd_dev_v1_header_read() guarantees - * the ondisk buffer we're working with has - * snap_names_len bytes beyond the end of the - * snapshot id array, this memcpy() is safe. - */ - memcpy(header->snap_names, &ondisk->snaps[snap_count], - snap_names_len); - /* Record each snapshot's size */ + /* ...as well as the array of their sizes. */ size = snap_count * sizeof (*header->snap_sizes); - header->snap_sizes = kmalloc(size, GFP_KERNEL); - if (!header->snap_sizes) + snap_sizes = kmalloc(size, GFP_KERNEL); + if (!snap_sizes) goto out_err; - for (i = 0; i < snap_count; i++) - header->snap_sizes[i] = - le64_to_cpu(ondisk->snaps[i].image_size); - } else { - header->snap_names = NULL; - header->snap_sizes = NULL; + + /* + * Copy the names, and fill in each snapshot's id + * and size. + * + * Note that rbd_dev_v1_header_read() guarantees the + * ondisk buffer we're working with has + * snap_names_len bytes beyond the end of the + * snapshot id array, this memcpy() is safe. + */ + memcpy(snap_names, &ondisk->snaps[snap_count], snap_names_len); + snaps = ondisk->snaps; + for (i = 0; i < snap_count; i++) { + snapc->snaps[i] = le64_to_cpu(snaps[i].id); + snap_sizes[i] = le64_to_cpu(snaps[i].image_size); + } } - header->features = 0; /* No features support in v1 images */ - header->obj_order = ondisk->options.order; - header->crypt_type = ondisk->options.crypt_type; - header->comp_type = ondisk->options.comp_type; + /* We won't fail any more, fill in the header */ + + if (first_time) { + header->object_prefix = object_prefix; + header->obj_order = ondisk->options.order; + header->crypt_type = ondisk->options.crypt_type; + header->comp_type = ondisk->options.comp_type; + /* The rest aren't used for format 1 images */ + header->stripe_unit = 0; + header->stripe_count = 0; + header->features = 0; + } - /* Allocate and fill in the snapshot context */ + /* The remaining fields always get updated (when we refresh) */ header->image_size = le64_to_cpu(ondisk->image_size); - - header->snapc = ceph_create_snap_context(snap_count, GFP_KERNEL); - if (!header->snapc) - goto out_err; - header->snapc->seq = le64_to_cpu(ondisk->snap_seq); - for (i = 0; i < snap_count; i++) - header->snapc->snaps[i] = le64_to_cpu(ondisk->snaps[i].id); + header->snapc = snapc; + header->snap_names = snap_names; + header->snap_sizes = snap_sizes; return 0; - +out_2big: + ret = -EIO; out_err: - kfree(header->snap_sizes); - header->snap_sizes = NULL; - kfree(header->snap_names); - header->snap_names = NULL; - kfree(header->object_prefix); - header->object_prefix = NULL; + kfree(snap_sizes); + kfree(snap_names); + ceph_put_snap_context(snapc); + kfree(object_prefix); - return -ENOMEM; + return ret; } static const char *_rbd_dev_v1_snap_name(struct rbd_device *rbd_dev, u32 which) -- cgit v1.2.3 From 662518b128c27def65e9af4bea2b56a1e04b3251 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 09:51:29 -0500 Subject: rbd: update in-core header directly Now that rbd_header_from_disk() only fills in one-time fields once, we can extend it slightly so it releases the other fields before replacing their values. This way there's no need to pass a temporary buffer and then copy all the results in. Just use the rbd device header structure in rbd_header_from_disk() so its values get updated directly. Note that this means we need to take the header semaphore at the point we update things. So pass the rbd_dev rather than the address of its header as its first argument to rbd_header_from_disk(), and have it return an error code. As a result, rbd_dev_v1_header_read() does all the work, rbd_read_header() becomes unnecessary, and rbd_dev_v1_refresh() becomes a very simple wrapper. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 98 +++++++++++++++-------------------------------------- 1 file changed, 27 insertions(+), 71 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index a3b6bf5e9ae8..e4586f2e04c2 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -730,9 +730,10 @@ static bool rbd_dev_ondisk_valid(struct rbd_image_header_ondisk *ondisk) * Fill an rbd image header with information from the given format 1 * on-disk header. */ -static int rbd_header_from_disk(struct rbd_image_header *header, +static int rbd_header_from_disk(struct rbd_device *rbd_dev, struct rbd_image_header_ondisk *ondisk) { + struct rbd_image_header *header = &rbd_dev->header; bool first_time = header->object_prefix == NULL; struct ceph_snap_context *snapc; char *object_prefix = NULL; @@ -802,6 +803,7 @@ static int rbd_header_from_disk(struct rbd_image_header *header, /* We won't fail any more, fill in the header */ + down_write(&rbd_dev->header_rwsem); if (first_time) { header->object_prefix = object_prefix; header->obj_order = ondisk->options.order; @@ -811,6 +813,10 @@ static int rbd_header_from_disk(struct rbd_image_header *header, header->stripe_unit = 0; header->stripe_count = 0; header->features = 0; + } else { + ceph_put_snap_context(header->snapc); + kfree(header->snap_names); + kfree(header->snap_sizes); } /* The remaining fields always get updated (when we refresh) */ @@ -820,6 +826,14 @@ static int rbd_header_from_disk(struct rbd_image_header *header, header->snap_names = snap_names; header->snap_sizes = snap_sizes; + /* Make sure mapping size is consistent with header info */ + + if (rbd_dev->spec->snap_id == CEPH_NOSNAP || first_time) + if (rbd_dev->mapping.size != header->image_size) + rbd_dev->mapping.size = header->image_size; + + up_write(&rbd_dev->header_rwsem); + return 0; out_2big: ret = -EIO; @@ -3032,17 +3046,11 @@ out: } /* - * Read the complete header for the given rbd device. - * - * Returns a pointer to a dynamically-allocated buffer containing - * the complete and validated header. Caller can pass the address - * of a variable that will be filled in with the version of the - * header object at the time it was read. - * - * Returns a pointer-coded errno if a failure occurs. + * Read the complete header for the given rbd device. On successful + * return, the rbd_dev->header field will contain up-to-date + * information about the image. */ -static struct rbd_image_header_ondisk * -rbd_dev_v1_header_read(struct rbd_device *rbd_dev) +static int rbd_dev_v1_header_read(struct rbd_device *rbd_dev) { struct rbd_image_header_ondisk *ondisk = NULL; u32 snap_count = 0; @@ -3067,22 +3075,22 @@ rbd_dev_v1_header_read(struct rbd_device *rbd_dev) size += names_size; ondisk = kmalloc(size, GFP_KERNEL); if (!ondisk) - return ERR_PTR(-ENOMEM); + return -ENOMEM; ret = rbd_obj_read_sync(rbd_dev, rbd_dev->header_name, 0, size, ondisk); if (ret < 0) - goto out_err; + goto out; if ((size_t)ret < size) { ret = -ENXIO; rbd_warn(rbd_dev, "short header read (want %zd got %d)", size, ret); - goto out_err; + goto out; } if (!rbd_dev_ondisk_valid(ondisk)) { ret = -ENXIO; rbd_warn(rbd_dev, "invalid header"); - goto out_err; + goto out; } names_size = le64_to_cpu(ondisk->snap_names_len); @@ -3090,27 +3098,8 @@ rbd_dev_v1_header_read(struct rbd_device *rbd_dev) snap_count = le32_to_cpu(ondisk->snap_count); } while (snap_count != want_count); - return ondisk; - -out_err: - kfree(ondisk); - - return ERR_PTR(ret); -} - -/* - * reload the ondisk the header - */ -static int rbd_read_header(struct rbd_device *rbd_dev, - struct rbd_image_header *header) -{ - struct rbd_image_header_ondisk *ondisk; - int ret; - - ondisk = rbd_dev_v1_header_read(rbd_dev); - if (IS_ERR(ondisk)) - return PTR_ERR(ondisk); - ret = rbd_header_from_disk(header, ondisk); + ret = rbd_header_from_disk(rbd_dev, ondisk); +out: kfree(ondisk); return ret; @@ -3121,40 +3110,7 @@ static int rbd_read_header(struct rbd_device *rbd_dev, */ static int rbd_dev_v1_refresh(struct rbd_device *rbd_dev) { - int ret; - struct rbd_image_header h; - - memset(&h, 0, sizeof (h)); - ret = rbd_read_header(rbd_dev, &h); - if (ret < 0) - return ret; - - down_write(&rbd_dev->header_rwsem); - - /* Update image size, and check for resize of mapped image */ - rbd_dev->header.image_size = h.image_size; - if (rbd_dev->spec->snap_id == CEPH_NOSNAP) - if (rbd_dev->mapping.size != rbd_dev->header.image_size) - rbd_dev->mapping.size = rbd_dev->header.image_size; - - /* rbd_dev->header.object_prefix shouldn't change */ - kfree(rbd_dev->header.snap_sizes); - kfree(rbd_dev->header.snap_names); - /* osd requests may still refer to snapc */ - ceph_put_snap_context(rbd_dev->header.snapc); - - rbd_dev->header.image_size = h.image_size; - rbd_dev->header.snapc = h.snapc; - rbd_dev->header.snap_names = h.snap_names; - rbd_dev->header.snap_sizes = h.snap_sizes; - /* Free the extra copy of the object prefix */ - if (strcmp(rbd_dev->header.object_prefix, h.object_prefix)) - rbd_warn(rbd_dev, "object prefix changed (ignoring)"); - kfree(h.object_prefix); - - up_write(&rbd_dev->header_rwsem); - - return ret; + return rbd_dev_v1_header_read(rbd_dev); } /* @@ -4517,7 +4473,7 @@ static int rbd_dev_v1_probe(struct rbd_device *rbd_dev) /* Populate rbd image metadata */ - ret = rbd_read_header(rbd_dev, &rbd_dev->header); + ret = rbd_dev_v1_header_read(rbd_dev); if (ret < 0) goto out_err; -- cgit v1.2.3 From 30d60ba2f258da24b91edb880338c7178f901de9 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 09:51:30 -0500 Subject: rbd: simplify rbd_dev_v1_probe() An rbd_dev structure's fields are all zero-filled for an initial probe, so there's no need to explicitly zero the parent_spec and parent_overlap fields in rbd_dev_v1_probe(). Removing these assignments makes rbd_dev_v1_probe() *almost* trivial. Move the dout() message that announces discovery of an image into rbd_dev_image_probe(), generalize to support images in either format and only show it if an image is fully discovered. This highlights that are some unnecessary cleanups in the error path for rbd_dev_v1_probe(), so they can be removed. Now rbd_dev_v1_probe() *is* a trivial wrapper function. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 37 +++++++------------------------------ 1 file changed, 7 insertions(+), 30 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index e4586f2e04c2..ae223819bbf0 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -4469,31 +4469,7 @@ static void rbd_dev_unprobe(struct rbd_device *rbd_dev) static int rbd_dev_v1_probe(struct rbd_device *rbd_dev) { - int ret; - - /* Populate rbd image metadata */ - - ret = rbd_dev_v1_header_read(rbd_dev); - if (ret < 0) - goto out_err; - - /* Version 1 images have no parent (no layering) */ - - rbd_dev->parent_spec = NULL; - rbd_dev->parent_overlap = 0; - - dout("discovered version 1 image, header name is %s\n", - rbd_dev->header_name); - - return 0; - -out_err: - kfree(rbd_dev->header_name); - rbd_dev->header_name = NULL; - kfree(rbd_dev->spec->image_id); - rbd_dev->spec->image_id = NULL; - - return ret; + return rbd_dev_v1_header_read(rbd_dev); } static int rbd_dev_v2_probe(struct rbd_device *rbd_dev) @@ -4553,9 +4529,6 @@ static int rbd_dev_v2_probe(struct rbd_device *rbd_dev) if (ret) goto out_err; - dout("discovered version 2 image, header name is %s\n", - rbd_dev->header_name); - return 0; out_err: rbd_dev->parent_overlap = 0; @@ -4758,9 +4731,13 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool read_only) rbd_dev->mapping.read_only = read_only; ret = rbd_dev_probe_parent(rbd_dev); - if (!ret) - return 0; + if (ret) + goto err_out_probe; + + dout("discovered format %u image, header name is %s\n", + rbd_dev->image_format, rbd_dev->header_name); + return 0; err_out_probe: rbd_dev_unprobe(rbd_dev); err_out_watch: -- cgit v1.2.3 From 99a41ebcee1a1ea0463b1b29d2e888de21a60c66 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 09:51:30 -0500 Subject: rbd: get rid of trivial v1 header wrappers Get rid of the trivial wrapper functions rbd_dev_v1_refresh() and rbd_dev_v1_probe(), substituting rbd_dev_v1_header_read() calls in their place. Rename rbd_dev_v1_header_read() to be rbd_dev_v1_header_info(), to be more generic (it will better reflect what happens with format 2 images). Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 21 ++++----------------- 1 file changed, 4 insertions(+), 17 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index ae223819bbf0..6748fe2d67d6 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -788,7 +788,7 @@ static int rbd_header_from_disk(struct rbd_device *rbd_dev, * Copy the names, and fill in each snapshot's id * and size. * - * Note that rbd_dev_v1_header_read() guarantees the + * Note that rbd_dev_v1_header_info() guarantees the * ondisk buffer we're working with has * snap_names_len bytes beyond the end of the * snapshot id array, this memcpy() is safe. @@ -3050,7 +3050,7 @@ out: * return, the rbd_dev->header field will contain up-to-date * information about the image. */ -static int rbd_dev_v1_header_read(struct rbd_device *rbd_dev) +static int rbd_dev_v1_header_info(struct rbd_device *rbd_dev) { struct rbd_image_header_ondisk *ondisk = NULL; u32 snap_count = 0; @@ -3105,14 +3105,6 @@ out: return ret; } -/* - * only read the first part of the ondisk header, without the snaps info - */ -static int rbd_dev_v1_refresh(struct rbd_device *rbd_dev) -{ - return rbd_dev_v1_header_read(rbd_dev); -} - /* * Clear the rbd device's EXISTS flag if the snapshot it's mapped to * has disappeared from the (just updated) snapshot context. @@ -3141,7 +3133,7 @@ static int rbd_dev_refresh(struct rbd_device *rbd_dev) mapping_size = rbd_dev->mapping.size; mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); if (rbd_dev->image_format == 1) - ret = rbd_dev_v1_refresh(rbd_dev); + ret = rbd_dev_v1_header_info(rbd_dev); else ret = rbd_dev_v2_refresh(rbd_dev); @@ -4467,11 +4459,6 @@ static void rbd_dev_unprobe(struct rbd_device *rbd_dev) memset(header, 0, sizeof (*header)); } -static int rbd_dev_v1_probe(struct rbd_device *rbd_dev) -{ - return rbd_dev_v1_header_read(rbd_dev); -} - static int rbd_dev_v2_probe(struct rbd_device *rbd_dev) { int ret; @@ -4714,7 +4701,7 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool read_only) goto out_header_name; if (rbd_dev->image_format == 1) - ret = rbd_dev_v1_probe(rbd_dev); + ret = rbd_dev_v1_header_info(rbd_dev); else ret = rbd_dev_v2_probe(rbd_dev); if (ret) -- cgit v1.2.3 From 2df3fac75851dc4257b90dc72fdd3cf27ba177bc Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 09:51:30 -0500 Subject: rbd: define rbd_dev_v2_header_info() This rearranges rbd_dev_v2_refresh() so it works more like rbd_dev_v1_header_info(). While format 1 images need to read the whole header object to get any information, format 2 can collect almost all information selectively. So the one-time initialization will remain in a separate function--based on rbd_dev_v2_probe(). Rename rbd_dev_v2_refresh() to be rbd_dev_v2_header_info(), and have it call rbd_dev_v2_header_onetime() if it's being called for the first time for the given rbd device. Rename rbd_dev_v2_probe() to be rbd_dev_v2_header_onetime() and remove the image size and snapshot context calls it held in common with the refresh function. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 42 ++++++++++++++++++------------------------ 1 file changed, 18 insertions(+), 24 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 6748fe2d67d6..0d874a546949 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -425,7 +425,8 @@ static void rbd_img_parent_read(struct rbd_obj_request *obj_request); static void rbd_dev_remove_parent(struct rbd_device *rbd_dev); static int rbd_dev_refresh(struct rbd_device *rbd_dev); -static int rbd_dev_v2_refresh(struct rbd_device *rbd_dev); +static int rbd_dev_v2_header_onetime(struct rbd_device *rbd_dev); +static int rbd_dev_v2_header_info(struct rbd_device *rbd_dev); static const char *rbd_dev_v2_snap_name(struct rbd_device *rbd_dev, u64 snap_id); static int _rbd_dev_v2_snap_size(struct rbd_device *rbd_dev, u64 snap_id, @@ -3135,7 +3136,7 @@ static int rbd_dev_refresh(struct rbd_device *rbd_dev) if (rbd_dev->image_format == 1) ret = rbd_dev_v1_header_info(rbd_dev); else - ret = rbd_dev_v2_refresh(rbd_dev); + ret = rbd_dev_v2_header_info(rbd_dev); /* If it's a mapped snapshot, validate its EXISTS flag */ @@ -4005,12 +4006,19 @@ out: return snap_name; } -static int rbd_dev_v2_refresh(struct rbd_device *rbd_dev) +static int rbd_dev_v2_header_info(struct rbd_device *rbd_dev) { + bool first_time = rbd_dev->header.object_prefix == NULL; int ret; down_write(&rbd_dev->header_rwsem); + if (first_time) { + ret = rbd_dev_v2_header_onetime(rbd_dev); + if (ret) + goto out; + } + ret = rbd_dev_v2_image_size(rbd_dev); if (ret) goto out; @@ -4459,22 +4467,18 @@ static void rbd_dev_unprobe(struct rbd_device *rbd_dev) memset(header, 0, sizeof (*header)); } -static int rbd_dev_v2_probe(struct rbd_device *rbd_dev) +static int rbd_dev_v2_header_onetime(struct rbd_device *rbd_dev) { int ret; - ret = rbd_dev_v2_image_size(rbd_dev); - if (ret) - goto out_err; - - /* Get the object prefix (a.k.a. block_name) for the image */ - ret = rbd_dev_v2_object_prefix(rbd_dev); if (ret) goto out_err; - /* Get the and check features for the image */ - + /* + * Get the and check features for the image. Currently the + * features are assumed to never change. + */ ret = rbd_dev_v2_features(rbd_dev); if (ret) goto out_err; @@ -4504,17 +4508,7 @@ static int rbd_dev_v2_probe(struct rbd_device *rbd_dev) if (ret < 0) goto out_err; } - - /* crypto and compression type aren't (yet) supported for v2 images */ - - rbd_dev->header.crypt_type = 0; - rbd_dev->header.comp_type = 0; - - /* Get the snapshot context, plus the header version */ - - ret = rbd_dev_v2_snap_context(rbd_dev); - if (ret) - goto out_err; + /* No support for crypto and compression type format 2 images */ return 0; out_err: @@ -4703,7 +4697,7 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool read_only) if (rbd_dev->image_format == 1) ret = rbd_dev_v1_header_info(rbd_dev); else - ret = rbd_dev_v2_probe(rbd_dev); + ret = rbd_dev_v2_header_info(rbd_dev); if (ret) goto err_out_watch; -- cgit v1.2.3 From c2b93e0699723700f886ce17bb65ffd771195a6d Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 7 May 2013 11:28:31 -0400 Subject: cifs: only set ops for inodes in I_NEW state It's generally not safe to reset the inode ops once they've been set. In the case where the inode was originally thought to be a directory and then later found to be a DFS referral, this can lead to an oops when we try to trigger an inode op on it after changing the ops to the blank referral operations. Cc: Reported-and-Tested-by: Sachin Prabhu Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index fc3025199cb3..20efd81266c6 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -171,7 +171,8 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr) if (fattr->cf_flags & CIFS_FATTR_DFS_REFERRAL) inode->i_flags |= S_AUTOMOUNT; - cifs_set_ops(inode); + if (inode->i_state & I_NEW) + cifs_set_ops(inode); } void -- cgit v1.2.3 From 91c6febb3817be576785ef06aeaaa8ed423e0a2a Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:32 -0500 Subject: rbd: fix an incorrect assertion condition In rbd_img_obj_parent_read_full_callback() there is an assertion intended to verify the size of the image request for a full parent read was the size of the original request's target object. But assertion was looking at the parent image order rather than the original one, and these values can differ. Fix that. This resolves: http://tracker.ceph.com/issues/4938 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 0d874a546949..15ac2a54d4f3 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2186,13 +2186,13 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) result = img_request->result; obj_size = img_request->length; xferred = img_request->xferred; + rbd_img_request_put(img_request); - rbd_dev = img_request->rbd_dev; + rbd_assert(orig_request->img_request); + rbd_dev = orig_request->img_request->rbd_dev; rbd_assert(rbd_dev); rbd_assert(obj_size == (u64)1 << rbd_dev->header.obj_order); - rbd_img_request_put(img_request); - if (result) goto out_err; -- cgit v1.2.3 From 5b2ab72d367d2682c1a237448fbc1595881a88fa Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:33 -0500 Subject: rbd: support reading parent page data Currently, rbd_img_parent_read() assumes the incoming object request contains bio data. But if a layered image is part of a multi-layer stack of images it will result in read requests of page data to parent images. Fortunately, it's not hard to add support for page data. This resolves: http://tracker.ceph.com/issues/4939 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 15ac2a54d4f3..2a0e9b81be48 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2574,7 +2574,7 @@ static void rbd_img_parent_read(struct rbd_obj_request *obj_request) rbd_assert(obj_request_img_data_test(obj_request)); rbd_assert(obj_request->img_request != NULL); rbd_assert(obj_request->result == (s32) -ENOENT); - rbd_assert(obj_request->type == OBJ_REQUEST_BIO); + rbd_assert(obj_request_type_valid(obj_request->type)); rbd_dev = obj_request->img_request->rbd_dev; rbd_assert(rbd_dev->parent != NULL); @@ -2590,8 +2590,12 @@ static void rbd_img_parent_read(struct rbd_obj_request *obj_request) rbd_obj_request_get(obj_request); img_request->obj_request = obj_request; - result = rbd_img_request_fill(img_request, OBJ_REQUEST_BIO, - obj_request->bio_list); + if (obj_request->type == OBJ_REQUEST_BIO) + result = rbd_img_request_fill(img_request, OBJ_REQUEST_BIO, + obj_request->bio_list); + else + result = rbd_img_request_fill(img_request, OBJ_REQUEST_PAGES, + obj_request->pages); if (result) goto out_err; -- cgit v1.2.3 From 7ce4eef7b5fad73b365b7e4b8892af3af72d4bd3 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:33 -0500 Subject: rbd: set mapping read-only flag in rbd_add() The rbd_dev->mapping field for a parent image is not meaningful. Since rbd_image_probe() is used both for images being mapped and their parents, it doesn't make sense to set that flag in that function. So move the setting of the mapping.read_only flag out of rbd_dev_image_probe() and into rbd_add() instead. This resolves: http://tracker.ceph.com/issues/4940 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 2a0e9b81be48..dbfc44a9defd 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -358,7 +358,7 @@ static ssize_t rbd_add(struct bus_type *bus, const char *buf, size_t count); static ssize_t rbd_remove(struct bus_type *bus, const char *buf, size_t count); -static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool read_only); +static int rbd_dev_image_probe(struct rbd_device *rbd_dev); static struct bus_attribute rbd_bus_attrs[] = { __ATTR(add, S_IWUSR, NULL, rbd_add), @@ -4549,7 +4549,7 @@ static int rbd_dev_probe_parent(struct rbd_device *rbd_dev) if (!parent) goto out_err; - ret = rbd_dev_image_probe(parent, true); + ret = rbd_dev_image_probe(parent); if (ret < 0) goto out_err; rbd_dev->parent = parent; @@ -4671,10 +4671,9 @@ static void rbd_dev_image_release(struct rbd_device *rbd_dev) /* * Probe for the existence of the header object for the given rbd - * device. For format 2 images this includes determining the image - * id. + * device. */ -static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool read_only) +static int rbd_dev_image_probe(struct rbd_device *rbd_dev) { int ret; int tmp; @@ -4709,12 +4708,6 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool read_only) if (ret) goto err_out_probe; - /* If we are mapping a snapshot it must be marked read-only */ - - if (rbd_dev->spec->snap_id != CEPH_NOSNAP) - read_only = true; - rbd_dev->mapping.read_only = read_only; - ret = rbd_dev_probe_parent(rbd_dev); if (ret) goto err_out_probe; @@ -4795,10 +4788,16 @@ static ssize_t rbd_add(struct bus_type *bus, rbdc = NULL; /* rbd_dev now owns this */ spec = NULL; /* rbd_dev now owns this */ - rc = rbd_dev_image_probe(rbd_dev, read_only); + rc = rbd_dev_image_probe(rbd_dev); if (rc < 0) goto err_out_rbd_dev; + /* If we are mapping a snapshot it must be marked read-only */ + + if (rbd_dev->spec->snap_id != CEPH_NOSNAP) + read_only = true; + rbd_dev->mapping.read_only = read_only; + rc = rbd_dev_device_setup(rbd_dev); if (!rc) return count; -- cgit v1.2.3 From 1f3ef78861ac4b510175e177899b9b5ba4bbed91 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:33 -0500 Subject: rbd: only set up watch for mapped images Any changes to parent images are immaterial to any mapped clone. So there is no need to have a watch event registered on header objects except for the header object of an image that is mapped. In fact, a watch request is a write operation, and we may only have read access to a parent image. We can't set up the watch request until we know the name of the header object though. So pass a flag to rbd_dev_image_probe() to indicate whether this probe is for a mapping or for a parent image. Change the second parameter to rbd_dev_header_watch_sync() be Boolean while we're at it. This resolves: http://tracker.ceph.com/issues/4941 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 43 ++++++++++++++++++++++++------------------- 1 file changed, 24 insertions(+), 19 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index dbfc44a9defd..e417704de8ca 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -358,7 +358,7 @@ static ssize_t rbd_add(struct bus_type *bus, const char *buf, size_t count); static ssize_t rbd_remove(struct bus_type *bus, const char *buf, size_t count); -static int rbd_dev_image_probe(struct rbd_device *rbd_dev); +static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool mapping); static struct bus_attribute rbd_bus_attrs[] = { __ATTR(add, S_IWUSR, NULL, rbd_add), @@ -2664,7 +2664,7 @@ static void rbd_watch_cb(u64 ver, u64 notify_id, u8 opcode, void *data) * Request sync osd watch/unwatch. The value of "start" determines * whether a watch request is being initiated or torn down. */ -static int rbd_dev_header_watch_sync(struct rbd_device *rbd_dev, int start) +static int rbd_dev_header_watch_sync(struct rbd_device *rbd_dev, bool start) { struct ceph_osd_client *osdc = &rbd_dev->rbd_client->client->osdc; struct rbd_obj_request *obj_request; @@ -2698,7 +2698,7 @@ static int rbd_dev_header_watch_sync(struct rbd_device *rbd_dev, int start) rbd_dev->watch_request->osd_req); osd_req_op_watch_init(obj_request->osd_req, 0, CEPH_OSD_OP_WATCH, - rbd_dev->watch_event->cookie, 0, start); + rbd_dev->watch_event->cookie, 0, start ? 1 : 0); rbd_osd_req_format_write(obj_request); ret = rbd_obj_request_submit(osdc, obj_request); @@ -4549,7 +4549,7 @@ static int rbd_dev_probe_parent(struct rbd_device *rbd_dev) if (!parent) goto out_err; - ret = rbd_dev_image_probe(parent); + ret = rbd_dev_image_probe(parent, false); if (ret < 0) goto out_err; rbd_dev->parent = parent; @@ -4654,12 +4654,7 @@ static int rbd_dev_header_name(struct rbd_device *rbd_dev) static void rbd_dev_image_release(struct rbd_device *rbd_dev) { - int ret; - rbd_dev_unprobe(rbd_dev); - ret = rbd_dev_header_watch_sync(rbd_dev, 0); - if (ret) - rbd_warn(rbd_dev, "failed to cancel watch event (%d)\n", ret); kfree(rbd_dev->header_name); rbd_dev->header_name = NULL; rbd_dev->image_format = 0; @@ -4671,9 +4666,11 @@ static void rbd_dev_image_release(struct rbd_device *rbd_dev) /* * Probe for the existence of the header object for the given rbd - * device. + * device. If this image is the one being mapped (i.e., not a + * parent), initiate a watch on its header object before using that + * object to get detailed information about the rbd image. */ -static int rbd_dev_image_probe(struct rbd_device *rbd_dev) +static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool mapping) { int ret; int tmp; @@ -4693,9 +4690,11 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev) if (ret) goto err_out_format; - ret = rbd_dev_header_watch_sync(rbd_dev, 1); - if (ret) - goto out_header_name; + if (mapping) { + ret = rbd_dev_header_watch_sync(rbd_dev, true); + if (ret) + goto out_header_name; + } if (rbd_dev->image_format == 1) ret = rbd_dev_v1_header_info(rbd_dev); @@ -4719,9 +4718,12 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev) err_out_probe: rbd_dev_unprobe(rbd_dev); err_out_watch: - tmp = rbd_dev_header_watch_sync(rbd_dev, 0); - if (tmp) - rbd_warn(rbd_dev, "unable to tear down watch request\n"); + if (mapping) { + tmp = rbd_dev_header_watch_sync(rbd_dev, false); + if (tmp) + rbd_warn(rbd_dev, "unable to tear down " + "watch request (%d)\n", tmp); + } out_header_name: kfree(rbd_dev->header_name); rbd_dev->header_name = NULL; @@ -4788,7 +4790,7 @@ static ssize_t rbd_add(struct bus_type *bus, rbdc = NULL; /* rbd_dev now owns this */ spec = NULL; /* rbd_dev now owns this */ - rc = rbd_dev_image_probe(rbd_dev); + rc = rbd_dev_image_probe(rbd_dev, true); if (rc < 0) goto err_out_rbd_dev; @@ -4910,10 +4912,13 @@ static ssize_t rbd_remove(struct bus_type *bus, spin_unlock_irq(&rbd_dev->lock); if (ret < 0) goto done; - ret = count; rbd_bus_del_dev(rbd_dev); + ret = rbd_dev_header_watch_sync(rbd_dev, false); + if (ret) + rbd_warn(rbd_dev, "failed to cancel watch event (%d)\n", ret); rbd_dev_image_release(rbd_dev); module_put(THIS_MODULE); + ret = count; done: mutex_unlock(&ctl_mutex); -- cgit v1.2.3 From c48f3f86e248b1649ad22151dd45ef2610101ed3 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Wed, 8 May 2013 08:49:52 -0500 Subject: rbd: kill rbd_img_request_get() Get rid of rbd_img_request_get(), because it isn't used, and maybe won't ever be needed. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index e417704de8ca..51c45e793354 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -1357,13 +1357,6 @@ static void rbd_obj_request_put(struct rbd_obj_request *obj_request) kref_put(&obj_request->kref, rbd_obj_request_destroy); } -static void rbd_img_request_get(struct rbd_img_request *img_request) -{ - dout("%s: img %p (was %d)\n", __func__, img_request, - atomic_read(&img_request->kref.refcount)); - kref_get(&img_request->kref); -} - static void rbd_img_request_destroy(struct kref *kref); static void rbd_img_request_put(struct rbd_img_request *img_request) { @@ -1888,9 +1881,6 @@ static struct rbd_img_request *rbd_img_request_create( INIT_LIST_HEAD(&img_request->obj_requests); kref_init(&img_request->kref); - rbd_img_request_get(img_request); /* Avoid a warning */ - rbd_img_request_put(img_request); /* TEMPORARY */ - dout("%s: rbd_dev %p %s %llu/%llu -> img %p\n", __func__, rbd_dev, write_request ? "write" : "read", offset, length, img_request); -- cgit v1.2.3 From 074d72ff57f65de779e2f70d5906964c0ba1c123 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 8 May 2013 12:13:03 -0400 Subject: x86/microcode: Add local mutex to fix physical CPU hot-add deadlock This can easily be triggered if a new CPU is added (via ACPI hotplug mechanism) and from user-space you do: echo 1 > /sys/devices/system/cpu/cpu3/online (or wait for UDEV to do it) on a newly appeared physical CPU. The deadlock is that the "store_online" in drivers/base/cpu.c takes the cpu_hotplug_driver_lock() lock, then calls "cpu_up". "cpu_up" eventually ends up calling "save_mc_for_early" which also takes the cpu_hotplug_driver_lock() lock. And here is that lockdep thinks of it: smpboot: Stack at about ffff880075c39f44 smpboot: CPU3: has booted. microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x25 ============================================= [ INFO: possible recursive locking detected ] 3.9.0upstream-10129-g167af0e #1 Not tainted --------------------------------------------- sh/2487 is trying to acquire lock: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [] cpu_hotplug_driver_lock+0x12/0x20 but task is already holding lock: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [] cpu_hotplug_driver_lock+0x12/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(x86_cpu_hotplug_driver_mutex); lock(x86_cpu_hotplug_driver_mutex); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by sh/2487: #0: (sb_writers#5){.+.+.+}, at: [] vfs_write+0x17d/0x190 #1: (&buffer->mutex){+.+.+.}, at: [] sysfs_write_file+0x3f/0x160 #2: (s_active#20){.+.+.+}, at: [] sysfs_write_file+0xc8/0x160 #3: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [] cpu_hotplug_driver_lock+0x12/0x20 #4: (cpu_add_remove_lock){+.+.+.}, at: [] cpu_maps_update_begin+0x12/0x20 #5: (cpu_hotplug.lock){+.+.+.}, at: [] cpu_hotplug_begin+0x27/0x60 Suggested-and-Acked-by: Borislav Petkov Signed-off-by: Konrad Rzeszutek Wilk Cc: fenghua.yu@intel.com Cc: xen-devel@lists.xensource.com Cc: stable@vger.kernel.org # for v3.9 Link: http://lkml.kernel.org/r/1368029583-23337-1-git-send-email-konrad.wilk@oracle.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/microcode_intel_early.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/microcode_intel_early.c b/arch/x86/kernel/microcode_intel_early.c index d893e8ed8ac9..2e9e12871c2b 100644 --- a/arch/x86/kernel/microcode_intel_early.c +++ b/arch/x86/kernel/microcode_intel_early.c @@ -487,6 +487,7 @@ static inline void show_saved_mc(void) #endif #if defined(CONFIG_MICROCODE_INTEL_EARLY) && defined(CONFIG_HOTPLUG_CPU) +static DEFINE_MUTEX(x86_cpu_microcode_mutex); /* * Save this mc into mc_saved_data. So it will be loaded early when a CPU is * hot added or resumes. @@ -507,7 +508,7 @@ int save_mc_for_early(u8 *mc) * Hold hotplug lock so mc_saved_data is not accessed by a CPU in * hotplug. */ - cpu_hotplug_driver_lock(); + mutex_lock(&x86_cpu_microcode_mutex); mc_saved_count_init = mc_saved_data.mc_saved_count; mc_saved_count = mc_saved_data.mc_saved_count; @@ -544,7 +545,7 @@ int save_mc_for_early(u8 *mc) } out: - cpu_hotplug_driver_unlock(); + mutex_unlock(&x86_cpu_microcode_mutex); return ret; } -- cgit v1.2.3 From 293c9c1cef6be46ad72b528fa79c3ff034551fe0 Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Sat, 27 Apr 2013 16:22:28 +0800 Subject: batman-adv: check proto length before accessing proto string buffer batadv_param_set_ra() strips the trailing '\n' from the supplied string buffer without checking the length of the buffer first. This patches avoids random memory access and associated potential crashes. Reported-by: Sasha Levin Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli --- net/batman-adv/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c index 3e30a0f1b908..9c620cd3b5f7 100644 --- a/net/batman-adv/main.c +++ b/net/batman-adv/main.c @@ -475,7 +475,7 @@ static int batadv_param_set_ra(const char *val, const struct kernel_param *kp) char *algo_name = (char *)val; size_t name_len = strlen(algo_name); - if (algo_name[name_len - 1] == '\n') + if (name_len > 0 && algo_name[name_len - 1] == '\n') algo_name[name_len - 1] = '\0'; bat_algo_ops = batadv_algo_get(algo_name); -- cgit v1.2.3 From 7da19971a9da9c5e63d259c9a8a566f071dc95d0 Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Tue, 7 May 2013 19:25:02 +0800 Subject: batman-adv: check return value of pskb_trim_rcsum() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reported-by: Sven Eckelmann Signed-off-by: Marek Lindner Acked-by: Martin Hundebøll Signed-off-by: Antonio Quartulli --- net/batman-adv/network-coding.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/network-coding.c b/net/batman-adv/network-coding.c index f7c54305a918..e84629ece9b7 100644 --- a/net/batman-adv/network-coding.c +++ b/net/batman-adv/network-coding.c @@ -1514,6 +1514,7 @@ batadv_nc_skb_decode_packet(struct batadv_priv *bat_priv, struct sk_buff *skb, struct ethhdr *ethhdr, ethhdr_tmp; uint8_t *orig_dest, ttl, ttvn; unsigned int coding_len; + int err; /* Save headers temporarily */ memcpy(&coded_packet_tmp, skb->data, sizeof(coded_packet_tmp)); @@ -1568,8 +1569,11 @@ batadv_nc_skb_decode_packet(struct batadv_priv *bat_priv, struct sk_buff *skb, coding_len); /* Resize decoded skb if decoded with larger packet */ - if (nc_packet->skb->len > coding_len + h_size) - pskb_trim_rcsum(skb, coding_len + h_size); + if (nc_packet->skb->len > coding_len + h_size) { + err = pskb_trim_rcsum(skb, coding_len + h_size); + if (err) + return NULL; + } /* Create decoded unicast packet */ unicast_packet = (struct batadv_unicast_packet *)skb->data; -- cgit v1.2.3 From 88e48d7b3340ef07b108eb8a8b3813dd093cc7f7 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Thu, 9 May 2013 09:35:45 +0200 Subject: batman-adv: make DAT drop ARP requests targeting local clients In the outgoing ARP request snooping routine in DAT, ARP Request sent by local clients which are supposed to be replied by other local clients can be silently dropped. The destination host will reply by itself through the LAN and therefore there is no need to involve DAT. Reported-by: Carlos Quijano Signed-off-by: Antonio Quartulli Tested-by: Carlos Quijano Signed-off-by: Marek Lindner --- net/batman-adv/distributed-arp-table.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/net/batman-adv/distributed-arp-table.c b/net/batman-adv/distributed-arp-table.c index 8e15d966d9b0..239992021b1d 100644 --- a/net/batman-adv/distributed-arp-table.c +++ b/net/batman-adv/distributed-arp-table.c @@ -837,6 +837,19 @@ bool batadv_dat_snoop_outgoing_arp_request(struct batadv_priv *bat_priv, dat_entry = batadv_dat_entry_hash_find(bat_priv, ip_dst); if (dat_entry) { + /* If the ARP request is destined for a local client the local + * client will answer itself. DAT would only generate a + * duplicate packet. + * + * Moreover, if the soft-interface is enslaved into a bridge, an + * additional DAT answer may trigger kernel warnings about + * a packet coming from the wrong port. + */ + if (batadv_is_my_client(bat_priv, dat_entry->mac_addr)) { + ret = true; + goto out; + } + skb_new = arp_create(ARPOP_REPLY, ETH_P_ARP, ip_src, bat_priv->soft_iface, ip_dst, hw_src, dat_entry->mac_addr, hw_src); -- cgit v1.2.3 From a4361860351e87876aebd9595906d928ce8572c6 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Tue, 7 May 2013 01:06:18 +0200 Subject: batman-adv: reorder clean up routine in order to avoid race conditions nc_worker accesses the originator table during its periodic work, but since the originator table is freed before stopping the worker this leads to a global protection fault. Fix this by killing the worker (in nc_free) before freeing the originator table. Moreover tidy up the entire clean up routine by running all the subcomponents freeing procedures first and then killing the TT and the originator tables at the end. Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner --- net/batman-adv/main.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c index 9c620cd3b5f7..1240f07ad31d 100644 --- a/net/batman-adv/main.c +++ b/net/batman-adv/main.c @@ -163,14 +163,22 @@ void batadv_mesh_free(struct net_device *soft_iface) batadv_vis_quit(bat_priv); batadv_gw_node_purge(bat_priv); - batadv_originator_free(bat_priv); batadv_nc_free(bat_priv); + batadv_dat_free(bat_priv); + batadv_bla_free(bat_priv); + /* Free the TT and the originator tables only after having terminated + * all the other depending components which may use these structures for + * their purposes. + */ batadv_tt_free(bat_priv); - batadv_bla_free(bat_priv); - - batadv_dat_free(bat_priv); + /* Since the originator table clean up routine is accessing the TT + * tables as well, it has to be invoked after the TT tables have been + * freed and marked as empty. This ensures that no cleanup RCU callbacks + * accessing the TT data are scheduled for later execution. + */ + batadv_originator_free(bat_priv); free_percpu(bat_priv->bat_counters); -- cgit v1.2.3 From 61559af111e41761f5f4f20ce0897345eb59076e Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 9 May 2013 21:14:20 +0800 Subject: ASoC: da7213: Fix setting dmic_samplephase and dmic_clk_rate When set dmic_samplephase and dmic_clk_rate bits for dmic_cfg, current code checks pdata->dmic_data_sel which is wrong. Signed-off-by: Axel Lin Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/da7213.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c index 41230ad1c3e0..4a6f1daf911f 100644 --- a/sound/soc/codecs/da7213.c +++ b/sound/soc/codecs/da7213.c @@ -1488,17 +1488,17 @@ static int da7213_probe(struct snd_soc_codec *codec) DA7213_DMIC_DATA_SEL_SHIFT); break; } - switch (pdata->dmic_data_sel) { + switch (pdata->dmic_samplephase) { case DA7213_DMIC_SAMPLE_ON_CLKEDGE: case DA7213_DMIC_SAMPLE_BETWEEN_CLKEDGE: - dmic_cfg |= (pdata->dmic_data_sel << + dmic_cfg |= (pdata->dmic_samplephase << DA7213_DMIC_SAMPLEPHASE_SHIFT); break; } - switch (pdata->dmic_data_sel) { + switch (pdata->dmic_clk_rate) { case DA7213_DMIC_CLK_3_0MHZ: case DA7213_DMIC_CLK_1_5MHZ: - dmic_cfg |= (pdata->dmic_data_sel << + dmic_cfg |= (pdata->dmic_clk_rate << DA7213_DMIC_CLK_RATE_SHIFT); break; } -- cgit v1.2.3 From 97fbfbf40b678b95551276e9413517ba7858dba7 Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Wed, 8 May 2013 17:03:30 +0100 Subject: drm: Add missing break in the command line mode parsing code As we parse the string given on the command line one char at a time, it seems that we do want a break at every case. Signed-off-by: Damien Lespiau Reviewed-by: Rodrigo Vivi Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_modes.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index f264d08062f0..7a83836879bc 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -1143,6 +1143,7 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option, was_digit = false; } else goto done; + break; case '0' ... '9': was_digit = true; break; -- cgit v1.2.3 From ebbd97ad885c3c41f56a5f81c27b1ea8156a0f07 Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Wed, 8 May 2013 17:03:32 +0100 Subject: drm: Don't prune modes loudly when a connector is disconnected drm_helper_probe_single_connector_modes() is responsible for pruning the previously detected modes on a disconnected connector. We don't really need to log, again, the full list of modes that used to be valid when connected. Signed-off-by: Damien Lespiau Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index e974f9309b72..62f45ad56dc7 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -121,6 +121,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector, connector->helper_private; int count = 0; int mode_flags = 0; + bool verbose_prune = true; DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, drm_get_connector_name(connector)); @@ -149,6 +150,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector, DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n", connector->base.id, drm_get_connector_name(connector)); drm_mode_connector_update_edid_property(connector, NULL); + verbose_prune = false; goto prune; } @@ -182,7 +184,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector, } prune: - drm_mode_prune_invalid(dev, &connector->modes, true); + drm_mode_prune_invalid(dev, &connector->modes, verbose_prune); if (list_empty(&connector->modes)) return 0; -- cgit v1.2.3 From d1fd3ddc469b576e36184f2bd02c0301d80118d3 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 7 May 2013 12:32:16 -0700 Subject: drm: refactor call to request_module This reduces the size of the stack frame when calling request_module(). Performing the sprintf before the call is not needed. Signed-off-by: Kees Cook Acked-by: Paul Menzel Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_encoder_slave.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/gpu/drm/drm_encoder_slave.c b/drivers/gpu/drm/drm_encoder_slave.c index 48c52f7df4e6..0cfb60f54766 100644 --- a/drivers/gpu/drm/drm_encoder_slave.c +++ b/drivers/gpu/drm/drm_encoder_slave.c @@ -54,16 +54,12 @@ int drm_i2c_encoder_init(struct drm_device *dev, struct i2c_adapter *adap, const struct i2c_board_info *info) { - char modalias[sizeof(I2C_MODULE_PREFIX) - + I2C_NAME_SIZE]; struct module *module = NULL; struct i2c_client *client; struct drm_i2c_encoder_driver *encoder_drv; int err = 0; - snprintf(modalias, sizeof(modalias), - "%s%s", I2C_MODULE_PREFIX, info->type); - request_module(modalias); + request_module("%s%s", I2C_MODULE_PREFIX, info->type); client = i2c_new_device(adap, info); if (!client) { -- cgit v1.2.3 From 54afc1214133deddd49162b101971af5711f1b3a Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Wed, 8 May 2013 16:38:33 +0300 Subject: drm: Add kernel-doc for drm_fb_helper_funcs->initial_config MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ville Syrjälä Signed-off-by: Dave Airlie --- include/drm/drm_fb_helper.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index 8230b46fdd73..61ebd51f6112 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -57,6 +57,7 @@ struct drm_fb_helper_surface_size { * @fb_probe: - Driver callback to allocate and initialize the fbdev info * structure. Futhermore it also needs to allocate the drm * framebuffer used to back the fbdev. + * @initial_config: - Setup an initial fbdev display configuration * * Driver callbacks used by the fbdev emulation helper library. */ -- cgit v1.2.3 From 7b97936f298af7991ca4717a4c23610d9ecd8927 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Wed, 8 May 2013 16:38:34 +0300 Subject: drm: Remove pointless '-' characters from drm_fb_helper documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ville Syrjälä Signed-off-by: Dave Airlie --- include/drm/drm_fb_helper.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index 61ebd51f6112..471f276ce8f7 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -50,14 +50,14 @@ struct drm_fb_helper_surface_size { /** * struct drm_fb_helper_funcs - driver callbacks for the fbdev emulation library - * @gamma_set: - Set the given gamma lut register on the given crtc. - * @gamma_get: - Read the given gamma lut register on the given crtc, used to - * save the current lut when force-restoring the fbdev for e.g. - * kdbg. - * @fb_probe: - Driver callback to allocate and initialize the fbdev info - * structure. Futhermore it also needs to allocate the drm - * framebuffer used to back the fbdev. - * @initial_config: - Setup an initial fbdev display configuration + * @gamma_set: Set the given gamma lut register on the given crtc. + * @gamma_get: Read the given gamma lut register on the given crtc, used to + * save the current lut when force-restoring the fbdev for e.g. + * kdbg. + * @fb_probe: Driver callback to allocate and initialize the fbdev info + * structure. Futhermore it also needs to allocate the drm + * framebuffer used to back the fbdev. + * @initial_config: Setup an initial fbdev display configuration * * Driver callbacks used by the fbdev emulation helper library. */ -- cgit v1.2.3 From b9434d0f162c351e02e0e8f66ca6b75a67595537 Mon Sep 17 00:00:00 2001 From: Chris Cummins Date: Thu, 9 May 2013 14:20:40 +0100 Subject: drm: Use names of ioctls in debug traces MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The intention here is to make the output of dmesg with full verbosity a bit easier for a human to parse. This commit transforms: [drm:drm_ioctl], pid=699, cmd=0x6458, nr=0x58, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc010645b, nr=0x5b, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc0106461, nr=0x61, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc01c64ae, nr=0xae, dev 0xe200, auth=1 [drm:drm_mode_addfb], [FB:32] [drm:drm_ioctl], pid=699, cmd=0xc0106464, nr=0x64, dev 0xe200, auth=1 [drm:drm_vm_open_locked], 0x7fd9302fe000,0x00a00000 [drm:drm_ioctl], pid=699, cmd=0x400c645f, nr=0x5f, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc00464af, nr=0xaf, dev 0xe200, auth=1 [drm:intel_crtc_set_config], [CRTC:3] [NOFB] into: [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_THROTTLE [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_CREATE [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_SET_TILING [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, IOCTL_MODE_ADDFB [drm:drm_mode_addfb], [FB:32] [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_MMAP_GTT [drm:drm_vm_open_locked], 0x7fd9302fe000,0x00a00000 [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_SET_DOMAIN [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, DRM_IOCTL_MODE_RMFB [drm:intel_crtc_set_config], [CRTC:3] [NOFB] v2: drm_ioctls is now a constant (Ville Syrjälä) Signed-off-by: Chris Cummins Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_drv.c | 20 +++++++++++++------- include/drm/drmP.h | 3 ++- 2 files changed, 15 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 8d4f29075af5..9cc247f55502 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -57,7 +57,7 @@ static int drm_version(struct drm_device *dev, void *data, struct drm_file *file_priv); #define DRM_IOCTL_DEF(ioctl, _func, _flags) \ - [DRM_IOCTL_NR(ioctl)] = {.cmd = ioctl, .func = _func, .flags = _flags, .cmd_drv = 0} + [DRM_IOCTL_NR(ioctl)] = {.cmd = ioctl, .func = _func, .flags = _flags, .cmd_drv = 0, .name = #ioctl} /** Ioctl table */ static const struct drm_ioctl_desc drm_ioctls[] = { @@ -375,7 +375,7 @@ long drm_ioctl(struct file *filp, { struct drm_file *file_priv = filp->private_data; struct drm_device *dev; - const struct drm_ioctl_desc *ioctl; + const struct drm_ioctl_desc *ioctl = NULL; drm_ioctl_t *func; unsigned int nr = DRM_IOCTL_NR(cmd); int retcode = -EINVAL; @@ -392,11 +392,6 @@ long drm_ioctl(struct file *filp, atomic_inc(&dev->counts[_DRM_STAT_IOCTLS]); ++file_priv->ioctl_count; - DRM_DEBUG("pid=%d, cmd=0x%02x, nr=0x%02x, dev 0x%lx, auth=%d\n", - task_pid_nr(current), cmd, nr, - (long)old_encode_dev(file_priv->minor->device), - file_priv->authenticated); - if ((nr >= DRM_CORE_IOCTL_COUNT) && ((nr < DRM_COMMAND_BASE) || (nr >= DRM_COMMAND_END))) goto err_i1; @@ -417,6 +412,11 @@ long drm_ioctl(struct file *filp, } else goto err_i1; + DRM_DEBUG("pid=%d, dev=0x%lx, auth=%d, %s\n", + task_pid_nr(current), + (long)old_encode_dev(file_priv->minor->device), + file_priv->authenticated, ioctl->name); + /* Do not trust userspace, use our own definition */ func = ioctl->func; /* is there a local override? */ @@ -471,6 +471,12 @@ long drm_ioctl(struct file *filp, } err_i1: + if (!ioctl) + DRM_DEBUG("invalid iotcl: pid=%d, dev=0x%lx, auth=%d, cmd=0x%02x, nr=0x%02x\n", + task_pid_nr(current), + (long)old_encode_dev(file_priv->minor->device), + file_priv->authenticated, cmd, nr); + if (kdata != stack_kdata) kfree(kdata); atomic_dec(&dev->ioctl_count); diff --git a/include/drm/drmP.h b/include/drm/drmP.h index f1ce786736e4..b092b5bcf227 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -316,6 +316,7 @@ struct drm_ioctl_desc { int flags; drm_ioctl_t *func; unsigned int cmd_drv; + const char *name; }; /** @@ -324,7 +325,7 @@ struct drm_ioctl_desc { */ #define DRM_IOCTL_DEF_DRV(ioctl, _func, _flags) \ - [DRM_IOCTL_NR(DRM_##ioctl)] = {.cmd = DRM_##ioctl, .func = _func, .flags = _flags, .cmd_drv = DRM_IOCTL_##ioctl} + [DRM_IOCTL_NR(DRM_##ioctl)] = {.cmd = DRM_##ioctl, .func = _func, .flags = _flags, .cmd_drv = DRM_IOCTL_##ioctl, .name = #ioctl} struct drm_magic_entry { struct list_head head; -- cgit v1.2.3 From 73ed148aea9dc0508be7e30e7a447f55c1b2f378 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 10 May 2013 16:59:18 +1000 Subject: powerpc/powernv: Improve kexec reliability We add a machine_shutdown hook that frees the OPAL interrupts (so they get masked at the source and don't fire while kexec'ing) and which triggers an IODA reset on all the PCIe host bridges which will have the effect of blocking all DMAs and subsequent PCIs interrupts. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/opal.h | 2 ++ arch/powerpc/platforms/powernv/opal.c | 17 +++++++++++++++++ arch/powerpc/platforms/powernv/pci-ioda.c | 9 +++++++++ arch/powerpc/platforms/powernv/pci.c | 12 ++++++++++++ arch/powerpc/platforms/powernv/pci.h | 2 ++ arch/powerpc/platforms/powernv/powernv.h | 2 ++ arch/powerpc/platforms/powernv/setup.c | 12 ++++++++++++ 7 files changed, 56 insertions(+) diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index b6c8b58b1d76..b2906adb89d3 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -563,6 +563,8 @@ extern void opal_nvram_init(void); extern int opal_machine_check(struct pt_regs *regs); +extern void opal_shutdown(void); + #endif /* __ASSEMBLY__ */ #endif /* __OPAL_H */ diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index 12d9846aa87e..27907cb18b8a 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -28,6 +29,8 @@ struct opal { static struct device_node *opal_node; static DEFINE_SPINLOCK(opal_write_lock); extern u64 opal_mc_secondary_handler[]; +static unsigned int *opal_irqs; +static unsigned int opal_irq_count; int __init early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data) @@ -323,6 +326,8 @@ static int __init opal_init(void) irqs = of_get_property(opal_node, "opal-interrupts", &irqlen); pr_debug("opal: Found %d interrupts reserved for OPAL\n", irqs ? (irqlen / 4) : 0); + opal_irq_count = irqlen / 4; + opal_irqs = kzalloc(opal_irq_count * sizeof(unsigned int), GFP_KERNEL); for (i = 0; irqs && i < (irqlen / 4); i++, irqs++) { unsigned int hwirq = be32_to_cpup(irqs); unsigned int irq = irq_create_mapping(NULL, hwirq); @@ -334,7 +339,19 @@ static int __init opal_init(void) if (rc) pr_warning("opal: Error %d requesting irq %d" " (0x%x)\n", rc, irq, hwirq); + opal_irqs[i] = irq; } return 0; } subsys_initcall(opal_init); + +void opal_shutdown(void) +{ + unsigned int i; + + for (i = 0; i < opal_irq_count; i++) { + if (opal_irqs[i]) + free_irq(opal_irqs[i], 0); + opal_irqs[i] = 0; + } +} diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 1da578b7c1bf..3937aaae5bc4 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -1048,6 +1048,12 @@ static u32 pnv_ioda_bdfn_to_pe(struct pnv_phb *phb, struct pci_bus *bus, return phb->ioda.pe_rmap[(bus->number << 8) | devfn]; } +static void pnv_pci_ioda_shutdown(struct pnv_phb *phb) +{ + opal_pci_reset(phb->opal_id, OPAL_PCI_IODA_TABLE_RESET, + OPAL_ASSERT_RESET); +} + void __init pnv_pci_init_ioda_phb(struct device_node *np, int ioda_type) { struct pci_controller *hose; @@ -1178,6 +1184,9 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, int ioda_type) /* Setup TCEs */ phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup; + /* Setup shutdown function for kexec */ + phb->shutdown = pnv_pci_ioda_shutdown; + /* Setup MSI support */ pnv_pci_init_ioda_msis(phb); diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 55dfca844ddf..163bd7422f1c 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -450,6 +450,18 @@ static void pnv_pci_dma_dev_setup(struct pci_dev *pdev) pnv_pci_dma_fallback_setup(hose, pdev); } +void pnv_pci_shutdown(void) +{ + struct pci_controller *hose; + + list_for_each_entry(hose, &hose_list, list_node) { + struct pnv_phb *phb = hose->private_data; + + if (phb && phb->shutdown) + phb->shutdown(phb); + } +} + /* Fixup wrong class code in p7ioc and p8 root complex */ static void pnv_p7ioc_rc_quirk(struct pci_dev *dev) { diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index 48dc4bb856a1..25d76c4df50b 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -86,6 +86,7 @@ struct pnv_phb { void (*dma_dev_setup)(struct pnv_phb *phb, struct pci_dev *pdev); void (*fixup_phb)(struct pci_controller *hose); u32 (*bdfn_to_pe)(struct pnv_phb *phb, struct pci_bus *bus, u32 devfn); + void (*shutdown)(struct pnv_phb *phb); union { struct { @@ -158,4 +159,5 @@ extern void pnv_pci_init_ioda_hub(struct device_node *np); extern void pnv_pci_init_ioda2_phb(struct device_node *np); extern void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl, u64 *startp, u64 *endp); + #endif /* __POWERNV_PCI_H */ diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h index 8a9df7f9667e..a1c6f83fc391 100644 --- a/arch/powerpc/platforms/powernv/powernv.h +++ b/arch/powerpc/platforms/powernv/powernv.h @@ -9,8 +9,10 @@ static inline void pnv_smp_init(void) { } #ifdef CONFIG_PCI extern void pnv_pci_init(void); +extern void pnv_pci_shutdown(void); #else static inline void pnv_pci_init(void) { } +static inline void pnv_pci_shutdown(void) { } #endif #endif /* _POWERNV_H */ diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index db1ad1c8f68f..c20381caaa3e 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -126,6 +126,17 @@ static void pnv_progress(char *s, unsigned short hex) { } +static void pnv_shutdown(void) +{ + /* Let the PCI code clear up IODA tables */ + pnv_pci_shutdown(); + + /* And unregister all OPAL interrupts so they don't fire + * up while we kexec + */ + opal_shutdown(); +} + #ifdef CONFIG_KEXEC static void pnv_kexec_cpu_down(int crash_shutdown, int secondary) { @@ -187,6 +198,7 @@ define_machine(powernv) { .init_IRQ = pnv_init_IRQ, .show_cpuinfo = pnv_show_cpuinfo, .progress = pnv_progress, + .machine_shutdown = pnv_shutdown, .power_save = power7_idle, .calibrate_decr = generic_calibrate_decr, #ifdef CONFIG_KEXEC -- cgit v1.2.3 From 4a3b8d0b833707811011ad14dd12dabf31fa690a Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 9 May 2013 22:09:41 -0500 Subject: powerpc: hard_irq_disable(): Call trace_hardirqs_off after disabling lockdep.c has this: /* * So we're supposed to get called after you mask local IRQs, * but for some reason the hardware doesn't quite think you did * a proper job. */ if (DEBUG_LOCKS_WARN_ON(!irqs_disabled())) return; Since irqs_disabled() is based on soft_enabled(), that (not just the hard EE bit) needs to be 0 before we call trace_hardirqs_off. Signed-off-by: Scott Wood --- arch/powerpc/include/asm/hw_irq.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index d615b28dda82..ba713f166fa5 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -96,11 +96,12 @@ static inline bool arch_irqs_disabled(void) #endif #define hard_irq_disable() do { \ + u8 _was_enabled = get_paca()->soft_enabled; \ __hard_irq_disable(); \ - if (local_paca->soft_enabled) \ - trace_hardirqs_off(); \ get_paca()->soft_enabled = 0; \ get_paca()->irq_happened |= PACA_IRQ_HARD_DIS; \ + if (_was_enabled) \ + trace_hardirqs_off(); \ } while(0) static inline bool lazy_irq_pending(void) -- cgit v1.2.3 From cf8b166d5c1c89aad6c436a954fa40fd18a75bfb Mon Sep 17 00:00:00 2001 From: Zhang Yanfei Date: Thu, 9 May 2013 23:57:42 +0800 Subject: x86/mm: Add missing comments for initial kernel direct mapping Two sets of comments were lost during patch-series shuffling: - comments for init_range_memory_mapping() - comments in init_mem_mapping that is helpful for reminding people that the pagetable is setup top-down The comments were written by Yinghai in his patch in: https://lkml.org/lkml/2012/11/28/620 This patch reintroduces them. Originally-From: Yinghai Lu Signed-off-by: Zhang Yanfei Cc: Yasuaki Ishimatsu Cc: Konrad Rzeszutek Wilk Cc: Andrew Morton Link: http://lkml.kernel.org/r/518BC776.7010506@gmail.com [ Tidied it all up a bit. ] Signed-off-by: Ingo Molnar --- arch/x86/mm/init.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index fdc5dca14fb3..eaac1743def7 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -359,7 +359,17 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, } /* - * would have hole in the middle or ends, and only ram parts will be mapped. + * We need to iterate through the E820 memory map and create direct mappings + * for only E820_RAM and E820_KERN_RESERVED regions. We cannot simply + * create direct mappings for all pfns from [0 to max_low_pfn) and + * [4GB to max_pfn) because of possible memory holes in high addresses + * that cannot be marked as UC by fixed/variable range MTRRs. + * Depending on the alignment of E820 ranges, this may possibly result + * in using smaller size (i.e. 4K instead of 2M or 1G) page tables. + * + * init_mem_mapping() calls init_range_memory_mapping() with big range. + * That range would have hole in the middle or ends, and only ram parts + * will be mapped in init_range_memory_mapping(). */ static unsigned long __init init_range_memory_mapping( unsigned long r_start, @@ -419,6 +429,13 @@ void __init init_mem_mapping(void) max_pfn_mapped = 0; /* will get exact value next */ min_pfn_mapped = real_end >> PAGE_SHIFT; last_start = start = real_end; + + /* + * We start from the top (end of memory) and go to the bottom. + * The memblock_find_in_range() gets us a block of RAM from the + * end of RAM in [min_pfn_mapped, max_pfn_mapped) used as new pages + * for page table. + */ while (last_start > ISA_END_ADDRESS) { if (last_start > step_size) { start = round_down(last_start - 1, step_size); -- cgit v1.2.3 From db90f91f6f4a870583d5c11cda187f20e4d835ae Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 12:52:12 +0100 Subject: ARM: 7714/1: mmc: mmci: Ensure return value of regulator_enable() is checked MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch suppresses the warning below: drivers/mmc/host/mmci.c: In function ‘mmci_set_ios’: drivers/mmc/host/mmci.c:1165:20: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result [-Wunused-result] Cc: Chris Ball Acked-by: Srinidhi Kasagar Signed-off-by: Lee Jones Signed-off-by: Russell King --- drivers/mmc/host/mmci.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 375c109607ff..f4f3038c1df0 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1130,6 +1130,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) struct variant_data *variant = host->variant; u32 pwr = 0; unsigned long flags; + int ret; pm_runtime_get_sync(mmc_dev(mmc)); @@ -1161,8 +1162,12 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) break; case MMC_POWER_ON: if (!IS_ERR(mmc->supply.vqmmc) && - !regulator_is_enabled(mmc->supply.vqmmc)) - regulator_enable(mmc->supply.vqmmc); + !regulator_is_enabled(mmc->supply.vqmmc)) { + ret = regulator_enable(mmc->supply.vqmmc); + if (ret < 0) + dev_err(mmc_dev(mmc), + "failed to enable vqmmc regulator\n"); + } pwr |= MCI_PWR_ON; break; -- cgit v1.2.3 From 9e01573b5cf8b3188c1f33493d2e73a30e8d25fc Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 9 May 2013 19:19:20 +0100 Subject: ARM: 7715/1: MCPM: adapt to GIC changes after upstream merge Since commit c0114709ed85 ("irqchip: gic: Perform the gic_secondary_init() call via CPU notifier") it is no longer required nor possible to call gic_secondary_init() from platform code. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/common/mcpm_platsmp.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c index 52b88d81b7bb..3caed0db6986 100644 --- a/arch/arm/common/mcpm_platsmp.c +++ b/arch/arm/common/mcpm_platsmp.c @@ -15,8 +15,6 @@ #include #include -#include - #include #include #include @@ -49,7 +47,6 @@ static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *i static void __cpuinit mcpm_secondary_init(unsigned int cpu) { mcpm_cpu_powered_up(); - gic_secondary_init(0); } #ifdef CONFIG_HOTPLUG_CPU -- cgit v1.2.3 From a2d0dbb4b55681874c5f288538ae55ae69baeaff Mon Sep 17 00:00:00 2001 From: Xiong Zhou Date: Tue, 7 May 2013 10:15:56 +0800 Subject: bq27x00: Fix I2C dependency in KConfig This patch fixes build failure(randconfig) of next-20130501. When config I2C as m, BATTERY_BQ27x00 as y, here comes the failure. The driver depends on I2C only if I2C is not disabled, as Lars commented. Last version of this patch make the driver depend on I2C unconditionally. Failure message: drivers/built-in.o: In function `bq27x00_read_i2c': bq27x00_battery.c:(.text+0x1082a7): undefined reference to `i2c_transfer' drivers/built-in.o: In function `bq27x00_battery_init': bq27x00_battery.c:(.init.text+0x6085): undefined reference to `i2c_register_driver' bq27x00_battery.c:(.init.text+0x60c7): undefined reference to `i2c_del_driver' drivers/built-in.o: In function `bq27x00_battery_exit': bq27x00_battery.c:(.exit.text+0xbf0): undefined reference to `i2c_del_driver' make: *** [vmlinux] Error 1 Signed-off-by: Xiong Zhou Cc: Lars-Peter Clausen Signed-off-by: Anton Vorontsov --- drivers/power/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 814bcb9c942d..674e633a5e1b 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -152,6 +152,7 @@ config BATTERY_SBS config BATTERY_BQ27x00 tristate "BQ27x00 battery driver" + depends on I2C || I2C=n help Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips. -- cgit v1.2.3 From d3251859168b0b12841e1b90d6d768ab478dc23d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 May 2013 11:10:17 -0700 Subject: workqueue: workqueue_congested() shouldn't translate WORK_CPU_UNBOUND into node number df2d5ae499 ("workqueue: map an unbound workqueues to multiple per-node pool_workqueues") made unbound workqueues to map to multiple per-node pool_workqueues and accordingly updated workqueue_contested() so that, for unbound workqueues, it maps the specified @cpu to the NUMA node number to obtain the matching pool_workqueue to query the congested state. Before this change, workqueue_congested() ignored @cpu for unbound workqueues as there was only one pool_workqueue and some users (fscache) called it with WORK_CPU_UNBOUND. After the commit, this causes the following oops as WORK_CPU_UNBOUND gets translated to garbage by cpu_to_node(). BUG: unable to handle kernel paging request at ffff8803598d98b8 IP: [] unbound_pwq_by_node+0xa1/0xfa PGD 2421067 PUD 0 Oops: 0000 [#1] SMP CPU: 1 PID: 2689 Comm: cat Tainted: GF 3.9.0-fsdevel+ #4 task: ffff88003d801040 ti: ffff880025806000 task.ti: ffff880025806000 RIP: 0010:[] [] unbound_pwq_by_node+0xa1/0xfa RSP: 0018:ffff880025807ad8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff8800388a2400 RCX: 0000000000000003 RDX: ffff880025807fd8 RSI: ffffffff81a31420 RDI: ffff88003d8016e0 RBP: ffff880025807ae8 R08: ffff88003d801730 R09: ffffffffa00b4898 R10: ffffffff81044217 R11: ffff88003d801040 R12: 0000000064206e97 R13: ffff880036059d98 R14: ffff880038cc8080 R15: ffff880038cc82d0 FS: 00007f21afd9c740(0000) GS:ffff88003d100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff8803598d98b8 CR3: 000000003df49000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff8800388a2400 0000000000000002 ffff880025807b18 ffffffff810442ce ffffffff81044217 ffff880000000002 ffff8800371b4080 ffff88003d112ec0 ffff880025807b38 ffffffffa00810b0 ffff880036059d88 ffff880036059be8 Call Trace: [] workqueue_congested+0xb7/0x12c [] fscache_enqueue_object+0xb2/0xe8 [fscache] [] __fscache_acquire_cookie+0x3b9/0x56c [fscache] [] nfs_fscache_set_inode_cookie+0xee/0x132 [nfs] [] do_open+0x9/0xd [nfs] [] do_dentry_open+0x175/0x24b [] finish_open+0x41/0x51 Fix it by using smp_processor_id() if @cpu is WORK_CPU_UNBOUND. Signed-off-by: Tejun Heo Reported-by: David Howells Tested-and-Acked-by: David Howells --- kernel/workqueue.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 4aa9f5bc6b2d..1ae602809efb 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -4311,6 +4311,12 @@ bool current_is_workqueue_rescuer(void) * no synchronization around this function and the test result is * unreliable and only useful as advisory hints or for debugging. * + * If @cpu is WORK_CPU_UNBOUND, the test is performed on the local CPU. + * Note that both per-cpu and unbound workqueues may be associated with + * multiple pool_workqueues which have separate congested states. A + * workqueue being congested on one CPU doesn't mean the workqueue is also + * contested on other CPUs / NUMA nodes. + * * RETURNS: * %true if congested, %false otherwise. */ @@ -4321,6 +4327,9 @@ bool workqueue_congested(int cpu, struct workqueue_struct *wq) rcu_read_lock_sched(); + if (cpu == WORK_CPU_UNBOUND) + cpu = smp_processor_id(); + if (!(wq->flags & WQ_UNBOUND)) pwq = per_cpu_ptr(wq->cpu_pwqs, cpu); else -- cgit v1.2.3 From c909fc8573af3cff9184551e79cf37784b5ddc24 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 4 May 2013 13:57:55 +0800 Subject: wm831x_backup: Fix wrong kfree call for devdata->backup.name devdata->backup.name points to devdata->name, the memory for devdata->name is part of struct wm831x_backup. Thus remove kfree call for devdata->backup.name. Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Anton Vorontsov --- drivers/power/wm831x_backup.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/power/wm831x_backup.c b/drivers/power/wm831x_backup.c index 58cbb009b74f..56fb509f4be0 100644 --- a/drivers/power/wm831x_backup.c +++ b/drivers/power/wm831x_backup.c @@ -207,7 +207,6 @@ static int wm831x_backup_remove(struct platform_device *pdev) struct wm831x_backup *devdata = platform_get_drvdata(pdev); power_supply_unregister(&devdata->backup); - kfree(devdata->backup.name); return 0; } -- cgit v1.2.3 From dccab6092d3c25bf943d12fb658e63fd88bf8b4a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 4 May 2013 18:51:09 +0800 Subject: pm2301_charger: Fix module alias prefix This driver is a i2c driver, use "i2c" rather than "platform" prefix for module alias. Signed-off-by: Axel Lin Signed-off-by: Anton Vorontsov --- drivers/power/pm2301_charger.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c index f123f3c219c3..e9c6ba0fee7b 100644 --- a/drivers/power/pm2301_charger.c +++ b/drivers/power/pm2301_charger.c @@ -1269,5 +1269,5 @@ module_exit(pm2xxx_charger_exit); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Rajkumar kasirajan, Olivier Launay"); -MODULE_ALIAS("platform:pm2xxx-charger"); +MODULE_ALIAS("i2c:pm2xxx-charger"); MODULE_DESCRIPTION("PM2xxx charger management driver"); -- cgit v1.2.3 From 416821d3d68164909b2cbcf398e4ba0797f5f8a2 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 10 May 2013 21:24:01 +0000 Subject: parisc: implement irq stacks - part 2 (v2) This patch fixes few build issues which were introduced with the last irq stack patch, e.g. the combination of stack overflow check and irq stack. Furthermore we now do proper locking and change the irq bh handler to use the irq stack as well. In /proc/interrupts one now can monitor how huge the irq stack has grown and how often it was preferred over the kernel stack. IRQ stacks are now enabled by default just to make sure that we not overflow the kernel stack by accident. Signed-off-by: Helge Deller --- arch/parisc/Kconfig | 2 +- arch/parisc/include/asm/hardirq.h | 9 ++++ arch/parisc/include/asm/processor.h | 3 ++ arch/parisc/kernel/irq.c | 101 +++++++++++++++++++++++++++++++----- arch/parisc/mm/init.c | 4 +- 5 files changed, 102 insertions(+), 17 deletions(-) diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index cad060f288cf..6507dabdd5dd 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -245,7 +245,7 @@ config SMP config IRQSTACKS bool "Use separate kernel stacks when processing interrupts" - default n + default y help If you say Y here the kernel will use separate kernel stacks for handling hard and soft interrupts. This can help avoid diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h index 12373c4dabab..c19f7138ba48 100644 --- a/arch/parisc/include/asm/hardirq.h +++ b/arch/parisc/include/asm/hardirq.h @@ -11,10 +11,18 @@ #include #include +#ifdef CONFIG_IRQSTACKS +#define __ARCH_HAS_DO_SOFTIRQ +#endif + typedef struct { unsigned int __softirq_pending; #ifdef CONFIG_DEBUG_STACKOVERFLOW unsigned int kernel_stack_usage; +#ifdef CONFIG_IRQSTACKS + unsigned int irq_stack_usage; + unsigned int irq_stack_counter; +#endif #endif #ifdef CONFIG_SMP unsigned int irq_resched_count; @@ -28,6 +36,7 @@ DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat); #define __ARCH_IRQ_STAT #define __IRQ_STAT(cpu, member) (irq_stat[cpu].member) #define inc_irq_stat(member) this_cpu_inc(irq_stat.member) +#define __inc_irq_stat(member) __this_cpu_inc(irq_stat.member) #define local_softirq_pending() this_cpu_read(irq_stat.__softirq_pending) #define __ARCH_SET_SOFTIRQ_PENDING diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h index 064015547d1e..cfbc43929cf6 100644 --- a/arch/parisc/include/asm/processor.h +++ b/arch/parisc/include/asm/processor.h @@ -63,10 +63,13 @@ */ #ifdef __KERNEL__ +#include + #define IRQ_STACK_SIZE (4096 << 2) /* 16k irq stack size */ union irq_stack_union { unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)]; + raw_spinlock_t lock; }; DECLARE_PER_CPU(union irq_stack_union, irq_stack_union); diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index e255db0bb761..55237a70e197 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -166,22 +166,32 @@ int arch_show_interrupts(struct seq_file *p, int prec) seq_printf(p, "%*s: ", prec, "STK"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->kernel_stack_usage); - seq_printf(p, " Kernel stack usage\n"); + seq_puts(p, " Kernel stack usage\n"); +# ifdef CONFIG_IRQSTACKS + seq_printf(p, "%*s: ", prec, "IST"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stats(j)->irq_stack_usage); + seq_puts(p, " Interrupt stack usage\n"); + seq_printf(p, "%*s: ", prec, "ISC"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stats(j)->irq_stack_counter); + seq_puts(p, " Interrupt stack usage counter\n"); +# endif #endif #ifdef CONFIG_SMP seq_printf(p, "%*s: ", prec, "RES"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_resched_count); - seq_printf(p, " Rescheduling interrupts\n"); + seq_puts(p, " Rescheduling interrupts\n"); seq_printf(p, "%*s: ", prec, "CAL"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_call_count); - seq_printf(p, " Function call interrupts\n"); + seq_puts(p, " Function call interrupts\n"); #endif seq_printf(p, "%*s: ", prec, "TLB"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_tlb_count); - seq_printf(p, " TLB shootdowns\n"); + seq_puts(p, " TLB shootdowns\n"); return 0; } @@ -378,6 +388,7 @@ static inline void stack_overflow_check(struct pt_regs *regs) unsigned long sp = regs->gr[30]; unsigned long stack_usage; unsigned int *last_usage; + int cpu = smp_processor_id(); /* if sr7 != 0, we interrupted a userspace process which we do not want * to check for stack overflow. We will only check the kernel stack. */ @@ -386,7 +397,31 @@ static inline void stack_overflow_check(struct pt_regs *regs) /* calculate kernel stack usage */ stack_usage = sp - stack_start; - last_usage = &per_cpu(irq_stat.kernel_stack_usage, smp_processor_id()); +#ifdef CONFIG_IRQSTACKS + if (likely(stack_usage <= THREAD_SIZE)) + goto check_kernel_stack; /* found kernel stack */ + + /* check irq stack usage */ + stack_start = (unsigned long) &per_cpu(irq_stack_union, cpu).stack; + stack_usage = sp - stack_start; + + last_usage = &per_cpu(irq_stat.irq_stack_usage, cpu); + if (unlikely(stack_usage > *last_usage)) + *last_usage = stack_usage; + + if (likely(stack_usage < (IRQ_STACK_SIZE - STACK_MARGIN))) + return; + + pr_emerg("stackcheck: %s will most likely overflow irq stack " + "(sp:%lx, stk bottom-top:%lx-%lx)\n", + current->comm, sp, stack_start, stack_start + IRQ_STACK_SIZE); + goto panic_check; + +check_kernel_stack: +#endif + + /* check kernel stack usage */ + last_usage = &per_cpu(irq_stat.kernel_stack_usage, cpu); if (unlikely(stack_usage > *last_usage)) *last_usage = stack_usage; @@ -398,31 +433,69 @@ static inline void stack_overflow_check(struct pt_regs *regs) "(sp:%lx, stk bottom-top:%lx-%lx)\n", current->comm, sp, stack_start, stack_start + THREAD_SIZE); +#ifdef CONFIG_IRQSTACKS +panic_check: +#endif if (sysctl_panic_on_stackoverflow) panic("low stack detected by irq handler - check messages\n"); #endif } #ifdef CONFIG_IRQSTACKS -DEFINE_PER_CPU(union irq_stack_union, irq_stack_union); +DEFINE_PER_CPU(union irq_stack_union, irq_stack_union) = { + .lock = __RAW_SPIN_LOCK_UNLOCKED((irq_stack_union).lock) + }; static void execute_on_irq_stack(void *func, unsigned long param1) { - unsigned long *irq_stack_start; + union irq_stack_union *union_ptr; unsigned long irq_stack; - int cpu = smp_processor_id(); + raw_spinlock_t *irq_stack_in_use; - irq_stack_start = &per_cpu(irq_stack_union, cpu).stack[0]; - irq_stack = (unsigned long) irq_stack_start; - irq_stack = ALIGN(irq_stack, 16); /* align for stack frame usage */ + union_ptr = &per_cpu(irq_stack_union, smp_processor_id()); + irq_stack = (unsigned long) &union_ptr->stack; + irq_stack = ALIGN(irq_stack + sizeof(irq_stack_union.lock), + 64); /* align for stack frame usage */ - BUG_ON(*irq_stack_start); /* report bug if we were called recursive. */ - *irq_stack_start = 1; + /* We may be called recursive. If we are already using the irq stack, + * just continue to use it. Use spinlocks to serialize + * the irq stack usage. + */ + irq_stack_in_use = &union_ptr->lock; + if (!raw_spin_trylock(irq_stack_in_use)) { + void (*direct_call)(unsigned long p1) = func; + + /* We are using the IRQ stack already. + * Do direct call on current stack. */ + direct_call(param1); + return; + } /* This is where we switch to the IRQ stack. */ call_on_stack(param1, func, irq_stack); - *irq_stack_start = 0; + __inc_irq_stat(irq_stack_counter); + + /* free up irq stack usage. */ + do_raw_spin_unlock(irq_stack_in_use); +} + +asmlinkage void do_softirq(void) +{ + __u32 pending; + unsigned long flags; + + if (in_interrupt()) + return; + + local_irq_save(flags); + + pending = local_softirq_pending(); + + if (pending) + execute_on_irq_stack(__do_softirq, 0); + + local_irq_restore(flags); } #endif /* CONFIG_IRQSTACKS */ diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index ce939ac8622b..1c965642068b 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -1069,7 +1069,7 @@ void flush_tlb_all(void) { int do_recycle; - inc_irq_stat(irq_tlb_count); + __inc_irq_stat(irq_tlb_count); do_recycle = 0; spin_lock(&sid_lock); if (dirty_space_ids > RECYCLE_THRESHOLD) { @@ -1090,7 +1090,7 @@ void flush_tlb_all(void) #else void flush_tlb_all(void) { - inc_irq_stat(irq_tlb_count); + __inc_irq_stat(irq_tlb_count); spin_lock(&sid_lock); flush_tlb_all_local(NULL); recycle_sids(); -- cgit v1.2.3 From f0a18819e261afc5fdbd8c5c6f9943123c5461ba Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Fri, 10 May 2013 23:21:38 +0000 Subject: parisc: fix SMP races when updating PTE and TLB entries in entry.S Currently, race conditions exist in the handling of TLB interruptions in entry.S. In particular, dirty bit updates can be lost if an accessed interruption occurs just after the dirty bit interruption on a different cpu. Lost dirty bit updates result in user pages not being flushed and general system instability. This change adds lock and unlock macros to synchronize all PTE and TLB updates done in entry.S. As a result, userspace stability is significantly improved. Signed-off-by: John David Anglin Signed-off-by: Helge Deller --- arch/parisc/kernel/entry.S | 155 ++++++++++++++++++++++++--------------------- 1 file changed, 83 insertions(+), 72 deletions(-) diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index 4bb96ad9b0b1..ae27cb6ce19a 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -452,9 +452,41 @@ L2_ptep \pgd,\pte,\index,\va,\fault .endm + /* Acquire pa_dbit_lock lock. */ + .macro dbit_lock spc,tmp,tmp1 +#ifdef CONFIG_SMP + cmpib,COND(=),n 0,\spc,2f + load32 PA(pa_dbit_lock),\tmp +1: LDCW 0(\tmp),\tmp1 + cmpib,COND(=) 0,\tmp1,1b + nop +2: +#endif + .endm + + /* Release pa_dbit_lock lock without reloading lock address. */ + .macro dbit_unlock0 spc,tmp +#ifdef CONFIG_SMP + or,COND(=) %r0,\spc,%r0 + stw \spc,0(\tmp) +#endif + .endm + + /* Release pa_dbit_lock lock. */ + .macro dbit_unlock1 spc,tmp +#ifdef CONFIG_SMP + load32 PA(pa_dbit_lock),\tmp + dbit_unlock0 \spc,\tmp +#endif + .endm + /* Set the _PAGE_ACCESSED bit of the PTE. Be clever and * don't needlessly dirty the cache line if it was already set */ - .macro update_ptep ptep,pte,tmp,tmp1 + .macro update_ptep spc,ptep,pte,tmp,tmp1 +#ifdef CONFIG_SMP + or,COND(=) %r0,\spc,%r0 + LDREG 0(\ptep),\pte +#endif ldi _PAGE_ACCESSED,\tmp1 or \tmp1,\pte,\tmp and,COND(<>) \tmp1,\pte,%r0 @@ -463,7 +495,11 @@ /* Set the dirty bit (and accessed bit). No need to be * clever, this is only used from the dirty fault */ - .macro update_dirty ptep,pte,tmp + .macro update_dirty spc,ptep,pte,tmp +#ifdef CONFIG_SMP + or,COND(=) %r0,\spc,%r0 + LDREG 0(\ptep),\pte +#endif ldi _PAGE_ACCESSED|_PAGE_DIRTY,\tmp or \tmp,\pte,\pte STREG \pte,0(\ptep) @@ -1111,11 +1147,13 @@ dtlb_miss_20w: L3_ptep ptp,pte,t0,va,dtlb_check_alias_20w - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb spc,pte,prot idtlbt pte,prot + dbit_unlock1 spc,t0 rfir nop @@ -1135,11 +1173,13 @@ nadtlb_miss_20w: L3_ptep ptp,pte,t0,va,nadtlb_check_alias_20w - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb spc,pte,prot idtlbt pte,prot + dbit_unlock1 spc,t0 rfir nop @@ -1161,7 +1201,8 @@ dtlb_miss_11: L2_ptep ptp,pte,t0,va,dtlb_check_alias_11 - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb_11 spc,pte,prot @@ -1172,6 +1213,7 @@ dtlb_miss_11: idtlbp prot,(%sr1,va) mtsp t0, %sr1 /* Restore sr1 */ + dbit_unlock1 spc,t0 rfir nop @@ -1192,7 +1234,8 @@ nadtlb_miss_11: L2_ptep ptp,pte,t0,va,nadtlb_check_alias_11 - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb_11 spc,pte,prot @@ -1204,6 +1247,7 @@ nadtlb_miss_11: idtlbp prot,(%sr1,va) mtsp t0, %sr1 /* Restore sr1 */ + dbit_unlock1 spc,t0 rfir nop @@ -1224,13 +1268,15 @@ dtlb_miss_20: L2_ptep ptp,pte,t0,va,dtlb_check_alias_20 - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb spc,pte,prot f_extend pte,t0 idtlbt pte,prot + dbit_unlock1 spc,t0 rfir nop @@ -1250,13 +1296,15 @@ nadtlb_miss_20: L2_ptep ptp,pte,t0,va,nadtlb_check_alias_20 - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb spc,pte,prot f_extend pte,t0 idtlbt pte,prot + dbit_unlock1 spc,t0 rfir nop @@ -1357,11 +1405,13 @@ itlb_miss_20w: L3_ptep ptp,pte,t0,va,itlb_fault - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb spc,pte,prot iitlbt pte,prot + dbit_unlock1 spc,t0 rfir nop @@ -1379,11 +1429,13 @@ naitlb_miss_20w: L3_ptep ptp,pte,t0,va,naitlb_check_alias_20w - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb spc,pte,prot iitlbt pte,prot + dbit_unlock1 spc,t0 rfir nop @@ -1405,7 +1457,8 @@ itlb_miss_11: L2_ptep ptp,pte,t0,va,itlb_fault - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb_11 spc,pte,prot @@ -1416,6 +1469,7 @@ itlb_miss_11: iitlbp prot,(%sr1,va) mtsp t0, %sr1 /* Restore sr1 */ + dbit_unlock1 spc,t0 rfir nop @@ -1427,7 +1481,8 @@ naitlb_miss_11: L2_ptep ptp,pte,t0,va,naitlb_check_alias_11 - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb_11 spc,pte,prot @@ -1438,6 +1493,7 @@ naitlb_miss_11: iitlbp prot,(%sr1,va) mtsp t0, %sr1 /* Restore sr1 */ + dbit_unlock1 spc,t0 rfir nop @@ -1459,13 +1515,15 @@ itlb_miss_20: L2_ptep ptp,pte,t0,va,itlb_fault - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb spc,pte,prot f_extend pte,t0 iitlbt pte,prot + dbit_unlock1 spc,t0 rfir nop @@ -1477,13 +1535,15 @@ naitlb_miss_20: L2_ptep ptp,pte,t0,va,naitlb_check_alias_20 - update_ptep ptp,pte,t0,t1 + dbit_lock spc,t0,t1 + update_ptep spc,ptp,pte,t0,t1 make_insert_tlb spc,pte,prot f_extend pte,t0 iitlbt pte,prot + dbit_unlock1 spc,t0 rfir nop @@ -1507,29 +1567,13 @@ dbit_trap_20w: L3_ptep ptp,pte,t0,va,dbit_fault -#ifdef CONFIG_SMP - cmpib,COND(=),n 0,spc,dbit_nolock_20w - load32 PA(pa_dbit_lock),t0 - -dbit_spin_20w: - LDCW 0(t0),t1 - cmpib,COND(=) 0,t1,dbit_spin_20w - nop - -dbit_nolock_20w: -#endif - update_dirty ptp,pte,t1 + dbit_lock spc,t0,t1 + update_dirty spc,ptp,pte,t1 make_insert_tlb spc,pte,prot idtlbt pte,prot -#ifdef CONFIG_SMP - cmpib,COND(=),n 0,spc,dbit_nounlock_20w - ldi 1,t1 - stw t1,0(t0) - -dbit_nounlock_20w: -#endif + dbit_unlock0 spc,t0 rfir nop @@ -1543,18 +1587,8 @@ dbit_trap_11: L2_ptep ptp,pte,t0,va,dbit_fault -#ifdef CONFIG_SMP - cmpib,COND(=),n 0,spc,dbit_nolock_11 - load32 PA(pa_dbit_lock),t0 - -dbit_spin_11: - LDCW 0(t0),t1 - cmpib,= 0,t1,dbit_spin_11 - nop - -dbit_nolock_11: -#endif - update_dirty ptp,pte,t1 + dbit_lock spc,t0,t1 + update_dirty spc,ptp,pte,t1 make_insert_tlb_11 spc,pte,prot @@ -1565,13 +1599,7 @@ dbit_nolock_11: idtlbp prot,(%sr1,va) mtsp t1, %sr1 /* Restore sr1 */ -#ifdef CONFIG_SMP - cmpib,COND(=),n 0,spc,dbit_nounlock_11 - ldi 1,t1 - stw t1,0(t0) - -dbit_nounlock_11: -#endif + dbit_unlock0 spc,t0 rfir nop @@ -1583,32 +1611,15 @@ dbit_trap_20: L2_ptep ptp,pte,t0,va,dbit_fault -#ifdef CONFIG_SMP - cmpib,COND(=),n 0,spc,dbit_nolock_20 - load32 PA(pa_dbit_lock),t0 - -dbit_spin_20: - LDCW 0(t0),t1 - cmpib,= 0,t1,dbit_spin_20 - nop - -dbit_nolock_20: -#endif - update_dirty ptp,pte,t1 + dbit_lock spc,t0,t1 + update_dirty spc,ptp,pte,t1 make_insert_tlb spc,pte,prot f_extend pte,t1 idtlbt pte,prot - -#ifdef CONFIG_SMP - cmpib,COND(=),n 0,spc,dbit_nounlock_20 - ldi 1,t1 - stw t1,0(t0) - -dbit_nounlock_20: -#endif + dbit_unlock0 spc,t0 rfir nop -- cgit v1.2.3 From cffe52f38eb6f633d63a3313661d9ce8daaae9dd Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Thu, 9 May 2013 09:25:09 +0000 Subject: qlcnic: Fix setting MAC address o Delete previous unicast MAC which is already programmed in adapter before setting new unicast MAC Signed-off-by: Manish Chopra Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 264d5a4f8153..04037b5d4d8f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -308,6 +308,23 @@ int qlcnic_read_mac_addr(struct qlcnic_adapter *adapter) return 0; } +static void qlcnic_delete_adapter_mac(struct qlcnic_adapter *adapter) +{ + struct qlcnic_mac_list_s *cur; + struct list_head *head; + + list_for_each(head, &adapter->mac_list) { + cur = list_entry(head, struct qlcnic_mac_list_s, list); + if (!memcmp(adapter->mac_addr, cur->mac_addr, ETH_ALEN)) { + qlcnic_sre_macaddr_change(adapter, cur->mac_addr, + 0, QLCNIC_MAC_DEL); + list_del(&cur->list); + kfree(cur); + return; + } + } +} + static int qlcnic_set_mac(struct net_device *netdev, void *p) { struct qlcnic_adapter *adapter = netdev_priv(netdev); @@ -322,11 +339,15 @@ static int qlcnic_set_mac(struct net_device *netdev, void *p) if (!is_valid_ether_addr(addr->sa_data)) return -EINVAL; + if (!memcmp(adapter->mac_addr, addr->sa_data, ETH_ALEN)) + return 0; + if (test_bit(__QLCNIC_DEV_UP, &adapter->state)) { netif_device_detach(netdev); qlcnic_napi_disable(adapter); } + qlcnic_delete_adapter_mac(adapter); memcpy(adapter->mac_addr, addr->sa_data, netdev->addr_len); memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); qlcnic_set_multi(adapter->netdev); -- cgit v1.2.3 From 8c0464108a79c7698d8af26a7b299c7f6651e02e Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Thu, 9 May 2013 09:25:10 +0000 Subject: qlcnic: Fix ethtool strings o Add missing information in ethtool statistics information array. o Fix the typo in the statistics information string. Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 08efb4635007..6005b06dbf64 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -131,12 +131,13 @@ static const char qlcnic_83xx_rx_stats_strings[][ETH_GSTRING_LEN] = { "ctx_lro_pkt_cnt", "ctx_ip_csum_error", "ctx_rx_pkts_wo_ctx", - "ctx_rx_pkts_dropped_wo_sts", + "ctx_rx_pkts_drop_wo_sds_on_card", + "ctx_rx_pkts_drop_wo_sds_on_host", "ctx_rx_osized_pkts", "ctx_rx_pkts_dropped_wo_rds", "ctx_rx_unexpected_mcast_pkts", "ctx_invalid_mac_address", - "ctx_rx_rds_ring_prim_attemoted", + "ctx_rx_rds_ring_prim_attempted", "ctx_rx_rds_ring_prim_success", "ctx_num_lro_flows_added", "ctx_num_lro_flows_removed", -- cgit v1.2.3 From 9fd13331ab8f108ade0e8077b69ff4663b63d43f Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Thu, 9 May 2013 09:25:11 +0000 Subject: qlcnic: Fix missing bracket in module parameter. Signed-off-by: Himanshu Madhani Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 04037b5d4d8f..d97446a3bf05 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -37,24 +37,24 @@ MODULE_PARM_DESC(qlcnic_mac_learn, "Mac Filter (0=learning is disabled, 1=Driver learning is enabled, 2=FDB learning is enabled)"); int qlcnic_use_msi = 1; -MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled"); +MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled)"); module_param_named(use_msi, qlcnic_use_msi, int, 0444); int qlcnic_use_msi_x = 1; -MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled"); +MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled)"); module_param_named(use_msi_x, qlcnic_use_msi_x, int, 0444); int qlcnic_auto_fw_reset = 1; -MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled"); +MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled)"); module_param_named(auto_fw_reset, qlcnic_auto_fw_reset, int, 0644); int qlcnic_load_fw_file; -MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file"); +MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file)"); module_param_named(load_fw_file, qlcnic_load_fw_file, int, 0444); int qlcnic_config_npars; module_param(qlcnic_config_npars, int, 0444); -MODULE_PARM_DESC(qlcnic_config_npars, "Configure NPARs (0=disabled, 1=enabled"); +MODULE_PARM_DESC(qlcnic_config_npars, "Configure NPARs (0=disabled, 1=enabled)"); static int qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent); static void qlcnic_remove(struct pci_dev *pdev); -- cgit v1.2.3 From b938662d88264c1a92611ca1b82fdff5a4e87121 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Thu, 9 May 2013 09:25:12 +0000 Subject: qlcnic: Fix ethtool supported port status for 83xx o Fix display for interface while using 'ethtool ' for 83xx adapter Signed-off-by: Himanshu Madhani Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 2 + .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 68 +++++++++++++++++++++- .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h | 2 +- .../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 49 ++++++++-------- 4 files changed, 94 insertions(+), 27 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 90c253b145ef..019c5f78732e 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -429,6 +429,7 @@ struct qlcnic_hardware_context { u16 port_type; u16 board_type; + u16 supported_type; u16 link_speed; u16 link_duplex; @@ -1514,6 +1515,7 @@ void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter); void qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter); void qlcnic_82xx_add_sysfs(struct qlcnic_adapter *adapter); void qlcnic_82xx_remove_sysfs(struct qlcnic_adapter *adapter); +int qlcnic_82xx_get_settings(struct qlcnic_adapter *, struct ethtool_cmd *); int qlcnicvf_config_bridged_mode(struct qlcnic_adapter *, u32); int qlcnicvf_config_led(struct qlcnic_adapter *, u32, u32); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index ea790a93ee7c..642fca0b15d2 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -2830,6 +2830,23 @@ int qlcnic_83xx_test_link(struct qlcnic_adapter *adapter) break; } config = cmd.rsp.arg[3]; + if (QLC_83XX_SFP_PRESENT(config)) { + switch (ahw->module_type) { + case LINKEVENT_MODULE_OPTICAL_UNKNOWN: + case LINKEVENT_MODULE_OPTICAL_SRLR: + case LINKEVENT_MODULE_OPTICAL_LRM: + case LINKEVENT_MODULE_OPTICAL_SFP_1G: + ahw->supported_type = PORT_FIBRE; + break; + case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE: + case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN: + case LINKEVENT_MODULE_TWINAX: + ahw->supported_type = PORT_TP; + break; + default: + ahw->supported_type = PORT_OTHER; + } + } if (config & 1) err = 1; } @@ -2838,7 +2855,8 @@ out: return config; } -int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter) +int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter, + struct ethtool_cmd *ecmd) { u32 config = 0; int status = 0; @@ -2851,6 +2869,54 @@ int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter) ahw->module_type = QLC_83XX_SFP_MODULE_TYPE(config); /* hard code until there is a way to get it from flash */ ahw->board_type = QLCNIC_BRDTYPE_83XX_10G; + + if (netif_running(adapter->netdev) && ahw->has_link_events) { + ethtool_cmd_speed_set(ecmd, ahw->link_speed); + ecmd->duplex = ahw->link_duplex; + ecmd->autoneg = ahw->link_autoneg; + } else { + ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN); + ecmd->duplex = DUPLEX_UNKNOWN; + ecmd->autoneg = AUTONEG_DISABLE; + } + + if (ahw->port_type == QLCNIC_XGBE) { + ecmd->supported = SUPPORTED_1000baseT_Full; + ecmd->advertising = ADVERTISED_1000baseT_Full; + } else { + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full); + ecmd->advertising = (ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseT_Full); + } + + switch (ahw->supported_type) { + case PORT_FIBRE: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; + ecmd->port = PORT_FIBRE; + ecmd->transceiver = XCVR_EXTERNAL; + break; + case PORT_TP: + ecmd->supported |= SUPPORTED_TP; + ecmd->advertising |= ADVERTISED_TP; + ecmd->port = PORT_TP; + ecmd->transceiver = XCVR_INTERNAL; + break; + default: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; + ecmd->port = PORT_OTHER; + ecmd->transceiver = XCVR_EXTERNAL; + break; + } + ecmd->phy_address = ahw->physical_port; return status; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index 1f1d85e6f2af..faf5553681e1 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -603,7 +603,7 @@ int qlcnic_83xx_get_vnic_pf_info(struct qlcnic_adapter *, struct qlcnic_info *); void qlcnic_83xx_get_minidump_template(struct qlcnic_adapter *); void qlcnic_83xx_get_stats(struct qlcnic_adapter *adapter, u64 *data); -int qlcnic_83xx_get_settings(struct qlcnic_adapter *); +int qlcnic_83xx_get_settings(struct qlcnic_adapter *, struct ethtool_cmd *); int qlcnic_83xx_set_settings(struct qlcnic_adapter *, struct ethtool_cmd *); void qlcnic_83xx_get_pauseparam(struct qlcnic_adapter *, struct ethtool_pauseparam *); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 6005b06dbf64..f67652de5a63 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -252,6 +252,18 @@ static int qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) { struct qlcnic_adapter *adapter = netdev_priv(dev); + + if (qlcnic_82xx_check(adapter)) + return qlcnic_82xx_get_settings(adapter, ecmd); + else if (qlcnic_83xx_check(adapter)) + return qlcnic_83xx_get_settings(adapter, ecmd); + + return -EIO; +} + +int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter, + struct ethtool_cmd *ecmd) +{ struct qlcnic_hardware_context *ahw = adapter->ahw; u32 speed, reg; int check_sfp_module = 0; @@ -277,10 +289,7 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) } else if (adapter->ahw->port_type == QLCNIC_XGBE) { u32 val = 0; - if (qlcnic_83xx_check(adapter)) - qlcnic_83xx_get_settings(adapter); - else - val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR); + val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR); if (val == QLCNIC_PORT_MODE_802_3_AP) { ecmd->supported = SUPPORTED_1000baseT_Full; @@ -290,16 +299,13 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) ecmd->advertising = ADVERTISED_10000baseT_Full; } - if (netif_running(dev) && adapter->ahw->has_link_events) { - if (qlcnic_82xx_check(adapter)) { - reg = QLCRD32(adapter, - P3P_LINK_SPEED_REG(pcifn)); - speed = P3P_LINK_SPEED_VAL(pcifn, reg); - ahw->link_speed = speed * P3P_LINK_SPEED_MHZ; - } - ethtool_cmd_speed_set(ecmd, adapter->ahw->link_speed); - ecmd->autoneg = adapter->ahw->link_autoneg; - ecmd->duplex = adapter->ahw->link_duplex; + if (netif_running(adapter->netdev) && ahw->has_link_events) { + reg = QLCRD32(adapter, P3P_LINK_SPEED_REG(pcifn)); + speed = P3P_LINK_SPEED_VAL(pcifn, reg); + ahw->link_speed = speed * P3P_LINK_SPEED_MHZ; + ethtool_cmd_speed_set(ecmd, ahw->link_speed); + ecmd->autoneg = ahw->link_autoneg; + ecmd->duplex = ahw->link_duplex; goto skip; } @@ -341,8 +347,8 @@ skip: case QLCNIC_BRDTYPE_P3P_10G_SFP_QT: ecmd->advertising |= ADVERTISED_TP; ecmd->supported |= SUPPORTED_TP; - check_sfp_module = netif_running(dev) && - adapter->ahw->has_link_events; + check_sfp_module = netif_running(adapter->netdev) && + ahw->has_link_events; case QLCNIC_BRDTYPE_P3P_10G_XFP: ecmd->supported |= SUPPORTED_FIBRE; ecmd->advertising |= ADVERTISED_FIBRE; @@ -356,8 +362,8 @@ skip: ecmd->advertising |= (ADVERTISED_FIBRE | ADVERTISED_TP); ecmd->port = PORT_FIBRE; - check_sfp_module = netif_running(dev) && - adapter->ahw->has_link_events; + check_sfp_module = netif_running(adapter->netdev) && + ahw->has_link_events; } else { ecmd->autoneg = AUTONEG_ENABLE; ecmd->supported |= (SUPPORTED_TP | SUPPORTED_Autoneg); @@ -366,13 +372,6 @@ skip: ecmd->port = PORT_TP; } break; - case QLCNIC_BRDTYPE_83XX_10G: - ecmd->autoneg = AUTONEG_DISABLE; - ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP); - ecmd->advertising |= (ADVERTISED_FIBRE | ADVERTISED_TP); - ecmd->port = PORT_FIBRE; - check_sfp_module = netif_running(dev) && ahw->has_link_events; - break; default: dev_err(&adapter->pdev->dev, "Unsupported board model %d\n", adapter->ahw->board_type); -- cgit v1.2.3 From 536faa61825c8e92f520264228388d69783370d3 Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Thu, 9 May 2013 09:25:13 +0000 Subject: qlcnic: Fix reset recovery after transmit timeout o When transmit timeout happens, recovery attempt should start with adapter soft reset. If soft reset fails to resume traffic, firmware dump will be collected and driver will perform a hard reset of the adapter. Reset recovery on 83xx was failing after a hard reset. This patch fixes that issue. Signed-off-by: Sony Chacko Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 22 +++++++++++++--------- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 15 ++++++++++----- 2 files changed, 23 insertions(+), 14 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index ab1d8d99cbd5..c67d1eb35e8f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -435,10 +435,6 @@ static void qlcnic_83xx_idc_attach_driver(struct qlcnic_adapter *adapter) } done: netif_device_attach(netdev); - if (netif_running(netdev)) { - netif_carrier_on(netdev); - netif_wake_queue(netdev); - } } static int qlcnic_83xx_idc_enter_failed_state(struct qlcnic_adapter *adapter, @@ -642,15 +638,21 @@ static int qlcnic_83xx_idc_reattach_driver(struct qlcnic_adapter *adapter) static void qlcnic_83xx_idc_update_idc_params(struct qlcnic_adapter *adapter) { + struct qlcnic_hardware_context *ahw = adapter->ahw; + qlcnic_83xx_idc_update_drv_presence_reg(adapter, 1, 1); - clear_bit(__QLCNIC_RESETTING, &adapter->state); set_bit(QLC_83XX_MBX_READY, &adapter->ahw->idc.status); qlcnic_83xx_idc_update_audit_reg(adapter, 0, 1); set_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status); - adapter->ahw->idc.quiesce_req = 0; - adapter->ahw->idc.delay = QLC_83XX_IDC_FW_POLL_DELAY; - adapter->ahw->idc.err_code = 0; - adapter->ahw->idc.collect_dump = 0; + + ahw->idc.quiesce_req = 0; + ahw->idc.delay = QLC_83XX_IDC_FW_POLL_DELAY; + ahw->idc.err_code = 0; + ahw->idc.collect_dump = 0; + ahw->reset_context = 0; + adapter->tx_timeo_cnt = 0; + + clear_bit(__QLCNIC_RESETTING, &adapter->state); } /** @@ -851,6 +853,7 @@ static int qlcnic_83xx_idc_ready_state(struct qlcnic_adapter *adapter) /* Check for soft reset request */ if (ahw->reset_context && !(val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY)) { + adapter->ahw->reset_context = 0; qlcnic_83xx_idc_tx_soft_reset(adapter); return ret; } @@ -914,6 +917,7 @@ static int qlcnic_83xx_idc_need_quiesce_state(struct qlcnic_adapter *adapter) static int qlcnic_83xx_idc_failed_state(struct qlcnic_adapter *adapter) { dev_err(&adapter->pdev->dev, "%s: please restart!!\n", __func__); + clear_bit(__QLCNIC_RESETTING, &adapter->state); adapter->ahw->idc.err_code = -EIO; return 0; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index d97446a3bf05..8fb836d4129f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2502,12 +2502,17 @@ static void qlcnic_tx_timeout(struct net_device *netdev) if (test_bit(__QLCNIC_RESETTING, &adapter->state)) return; - dev_err(&netdev->dev, "transmit timeout, resetting.\n"); - - if (++adapter->tx_timeo_cnt >= QLCNIC_MAX_TX_TIMEOUTS) - adapter->need_fw_reset = 1; - else + if (++adapter->tx_timeo_cnt >= QLCNIC_MAX_TX_TIMEOUTS) { + netdev_info(netdev, "Tx timeout, reset the adapter.\n"); + if (qlcnic_82xx_check(adapter)) + adapter->need_fw_reset = 1; + else if (qlcnic_83xx_check(adapter)) + qlcnic_83xx_idc_request_reset(adapter, + QLCNIC_FORCE_FW_DUMP_KEY); + } else { + netdev_info(netdev, "Tx timeout, reset adapter context.\n"); adapter->ahw->reset_context = 1; + } } static struct net_device_stats *qlcnic_get_stats(struct net_device *netdev) -- cgit v1.2.3 From 13a82b44fd761fdb6aeceb2ce9930310569efa3b Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Thu, 9 May 2013 09:25:14 +0000 Subject: qlcnic: Fix bug in diagnostics test reset recovery path o In order to perform reset recovery during diagnostics tests, current device status information need to be preserved. This patch makes the required changes in diagnostics routines Signed-off-by: Manish Chopra Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 642fca0b15d2..7b5cb610e7b6 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -1276,11 +1276,13 @@ out: return err; } -static int qlcnic_83xx_diag_alloc_res(struct net_device *netdev, int test) +static int qlcnic_83xx_diag_alloc_res(struct net_device *netdev, int test, + int num_sds_ring) { struct qlcnic_adapter *adapter = netdev_priv(netdev); struct qlcnic_host_sds_ring *sds_ring; struct qlcnic_host_rds_ring *rds_ring; + u16 adapter_state = adapter->is_up; u8 ring; int ret; @@ -1304,6 +1306,10 @@ static int qlcnic_83xx_diag_alloc_res(struct net_device *netdev, int test) ret = qlcnic_fw_create_ctx(adapter); if (ret) { qlcnic_detach(adapter); + if (adapter_state == QLCNIC_ADAPTER_UP_MAGIC) { + adapter->max_sds_rings = num_sds_ring; + qlcnic_attach(adapter); + } netif_device_attach(netdev); return ret; } @@ -1596,7 +1602,8 @@ int qlcnic_83xx_loopback_test(struct net_device *netdev, u8 mode) if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) return -EBUSY; - ret = qlcnic_83xx_diag_alloc_res(netdev, QLCNIC_LOOPBACK_TEST); + ret = qlcnic_83xx_diag_alloc_res(netdev, QLCNIC_LOOPBACK_TEST, + max_sds_rings); if (ret) goto fail_diag_alloc; @@ -3112,7 +3119,8 @@ int qlcnic_83xx_interrupt_test(struct net_device *netdev) if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) return -EIO; - ret = qlcnic_83xx_diag_alloc_res(netdev, QLCNIC_INTERRUPT_TEST); + ret = qlcnic_83xx_diag_alloc_res(netdev, QLCNIC_INTERRUPT_TEST, + max_sds_rings); if (ret) goto fail_diag_irq; -- cgit v1.2.3 From 9106e5db8336d5048ac79f72056572c461a2566b Mon Sep 17 00:00:00 2001 From: Rajesh Borundia Date: Thu, 9 May 2013 09:25:15 +0000 Subject: qlcnic: Fix mailbox response handling. o Fix mailbox response poll time to maximum 5 seconds which includes mailbox response time as well as time required for processing AEN if any. o Driver need to read firmware control mailbox register instead of host control mailbox register. Signed-off-by: Jitendra Kalsaria Signed-off-by: Rajesh Borundia Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 13 +++++-------- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h | 2 +- drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h | 2 +- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c | 8 +++----- 4 files changed, 10 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 7b5cb610e7b6..b4ff1e35a11d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -696,15 +696,14 @@ u32 qlcnic_83xx_mac_rcode(struct qlcnic_adapter *adapter) return 1; } -u32 qlcnic_83xx_mbx_poll(struct qlcnic_adapter *adapter) +u32 qlcnic_83xx_mbx_poll(struct qlcnic_adapter *adapter, u32 *wait_time) { u32 data; - unsigned long wait_time = 0; struct qlcnic_hardware_context *ahw = adapter->ahw; /* wait for mailbox completion */ do { data = QLCRDX(ahw, QLCNIC_FW_MBX_CTRL); - if (++wait_time > QLCNIC_MBX_TIMEOUT) { + if (++(*wait_time) > QLCNIC_MBX_TIMEOUT) { data = QLCNIC_RCODE_TIMEOUT; break; } @@ -720,8 +719,8 @@ int qlcnic_83xx_mbx_op(struct qlcnic_adapter *adapter, u16 opcode; u8 mbx_err_code; unsigned long flags; - u32 rsp, mbx_val, fw_data, rsp_num, mbx_cmd; struct qlcnic_hardware_context *ahw = adapter->ahw; + u32 rsp, mbx_val, fw_data, rsp_num, mbx_cmd, wait_time = 0; opcode = LSW(cmd->req.arg[0]); if (!test_bit(QLC_83XX_MBX_READY, &adapter->ahw->idc.status)) { @@ -754,15 +753,13 @@ int qlcnic_83xx_mbx_op(struct qlcnic_adapter *adapter, /* Signal FW about the impending command */ QLCWRX(ahw, QLCNIC_HOST_MBX_CTRL, QLCNIC_SET_OWNER); poll: - rsp = qlcnic_83xx_mbx_poll(adapter); + rsp = qlcnic_83xx_mbx_poll(adapter, &wait_time); if (rsp != QLCNIC_RCODE_TIMEOUT) { /* Get the FW response data */ fw_data = readl(QLCNIC_MBX_FW(ahw, 0)); if (fw_data & QLCNIC_MBX_ASYNC_EVENT) { __qlcnic_83xx_process_aen(adapter); - mbx_val = QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL); - if (mbx_val) - goto poll; + goto poll; } mbx_err_code = QLCNIC_MBX_STATUS(fw_data); rsp_num = QLCNIC_MBX_NUM_REGS(fw_data); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index faf5553681e1..f5db67fc9f55 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -620,7 +620,7 @@ int qlcnic_83xx_flash_test(struct qlcnic_adapter *); int qlcnic_83xx_enable_flash_write(struct qlcnic_adapter *); int qlcnic_83xx_disable_flash_write(struct qlcnic_adapter *); u32 qlcnic_83xx_mac_rcode(struct qlcnic_adapter *); -u32 qlcnic_83xx_mbx_poll(struct qlcnic_adapter *); +u32 qlcnic_83xx_mbx_poll(struct qlcnic_adapter *, u32 *); void qlcnic_83xx_enable_mbx_poll(struct qlcnic_adapter *); void qlcnic_83xx_disable_mbx_poll(struct qlcnic_adapter *); #endif diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h index 95b1b5732838..b6818f4356b9 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h @@ -134,7 +134,7 @@ struct qlcnic_mailbox_metadata { #define QLCNIC_SET_OWNER 1 #define QLCNIC_CLR_OWNER 0 -#define QLCNIC_MBX_TIMEOUT 10000 +#define QLCNIC_MBX_TIMEOUT 5000 #define QLCNIC_MBX_RSP_OK 1 #define QLCNIC_MBX_PORT_RSP_OK 0x1a diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c index 44d547d78b84..3869c3864deb 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c @@ -280,9 +280,9 @@ void qlcnic_sriov_cleanup(struct qlcnic_adapter *adapter) static int qlcnic_sriov_post_bc_msg(struct qlcnic_adapter *adapter, u32 *hdr, u32 *pay, u8 pci_func, u8 size) { + u32 rsp, mbx_val, fw_data, rsp_num, mbx_cmd, val, wait_time = 0; struct qlcnic_hardware_context *ahw = adapter->ahw; unsigned long flags; - u32 rsp, mbx_val, fw_data, rsp_num, mbx_cmd, val; u16 opcode; u8 mbx_err_code; int i, j; @@ -330,15 +330,13 @@ static int qlcnic_sriov_post_bc_msg(struct qlcnic_adapter *adapter, u32 *hdr, * assume something is wrong. */ poll: - rsp = qlcnic_83xx_mbx_poll(adapter); + rsp = qlcnic_83xx_mbx_poll(adapter, &wait_time); if (rsp != QLCNIC_RCODE_TIMEOUT) { /* Get the FW response data */ fw_data = readl(QLCNIC_MBX_FW(ahw, 0)); if (fw_data & QLCNIC_MBX_ASYNC_EVENT) { __qlcnic_83xx_process_aen(adapter); - mbx_val = QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL); - if (mbx_val) - goto poll; + goto poll; } mbx_err_code = QLCNIC_MBX_STATUS(fw_data); rsp_num = QLCNIC_MBX_NUM_REGS(fw_data); -- cgit v1.2.3 From cbccb18f4f937132af64a95ae04186a6c2c05236 Mon Sep 17 00:00:00 2001 From: Rajesh Borundia Date: Thu, 9 May 2013 09:25:16 +0000 Subject: qlcnic: Fix validation of link event command. o VF driver that has enabled asynchronous link events may not set BIT_8 in the request, if it does not require link state in the response. Signed-off-by: Pratik Pujar Signed-off-by: Rajesh Borundia Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c index c81be2da119b..1a66ccded235 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c @@ -1133,9 +1133,6 @@ static int qlcnic_sriov_validate_linkevent(struct qlcnic_vf_info *vf, if ((cmd->req.arg[1] >> 16) != vf->rx_ctx_id) return -EINVAL; - if (!(cmd->req.arg[1] & BIT_8)) - return -EINVAL; - return 0; } -- cgit v1.2.3 From a549984b8c95acbecefd1fdd4bfdbea4d29b0588 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 11 May 2013 19:07:42 -0400 Subject: ext4: revert "ext4: use io_end for multiple bios" This reverts commit 4eec708d263f0ee10861d69251708a225b64cac7. Multiple users have reported crashes which is apparently caused by this commit. Thanks to Dmitry Monakhov for bisecting it. Signed-off-by: "Theodore Ts'o" Cc: Dmitry Monakhov Cc: Jan Kara --- fs/ext4/ext4.h | 8 +--- fs/ext4/inode.c | 85 +++++++++++++++++--------------------- fs/ext4/page-io.c | 121 ++++++++++++++++++++---------------------------------- 3 files changed, 85 insertions(+), 129 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 0aabb344b02e..5aae3d12d400 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -209,7 +209,6 @@ typedef struct ext4_io_end { ssize_t size; /* size of the extent */ struct kiocb *iocb; /* iocb struct for AIO */ int result; /* error value for AIO */ - atomic_t count; /* reference counter */ } ext4_io_end_t; struct ext4_io_submit { @@ -2651,14 +2650,11 @@ extern int ext4_move_extents(struct file *o_filp, struct file *d_filp, /* page-io.c */ extern int __init ext4_init_pageio(void); +extern void ext4_add_complete_io(ext4_io_end_t *io_end); extern void ext4_exit_pageio(void); extern void ext4_ioend_shutdown(struct inode *); +extern void ext4_free_io_end(ext4_io_end_t *io); extern ext4_io_end_t *ext4_init_io_end(struct inode *inode, gfp_t flags); -extern ext4_io_end_t *ext4_get_io_end(ext4_io_end_t *io_end); -extern int ext4_put_io_end(ext4_io_end_t *io_end); -extern void ext4_put_io_end_defer(ext4_io_end_t *io_end); -extern void ext4_io_submit_init(struct ext4_io_submit *io, - struct writeback_control *wbc); extern void ext4_end_io_work(struct work_struct *work); extern void ext4_io_submit(struct ext4_io_submit *io); extern int ext4_bio_write_page(struct ext4_io_submit *io, diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 793d44b84d7f..d66656992358 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1487,10 +1487,7 @@ static int mpage_da_submit_io(struct mpage_da_data *mpd, struct ext4_io_submit io_submit; BUG_ON(mpd->next_page <= mpd->first_page); - ext4_io_submit_init(&io_submit, mpd->wbc); - io_submit.io_end = ext4_init_io_end(inode, GFP_NOFS); - if (!io_submit.io_end) - return -ENOMEM; + memset(&io_submit, 0, sizeof(io_submit)); /* * We need to start from the first_page to the next_page - 1 * to make sure we also write the mapped dirty buffer_heads. @@ -1578,8 +1575,6 @@ static int mpage_da_submit_io(struct mpage_da_data *mpd, pagevec_release(&pvec); } ext4_io_submit(&io_submit); - /* Drop io_end reference we got from init */ - ext4_put_io_end_defer(io_submit.io_end); return ret; } @@ -2238,16 +2233,9 @@ static int ext4_writepage(struct page *page, */ return __ext4_journalled_writepage(page, len); - ext4_io_submit_init(&io_submit, wbc); - io_submit.io_end = ext4_init_io_end(inode, GFP_NOFS); - if (!io_submit.io_end) { - redirty_page_for_writepage(wbc, page); - return -ENOMEM; - } + memset(&io_submit, 0, sizeof(io_submit)); ret = ext4_bio_write_page(&io_submit, page, len, wbc); ext4_io_submit(&io_submit); - /* Drop io_end reference we got from init */ - ext4_put_io_end_defer(io_submit.io_end); return ret; } @@ -3078,13 +3066,9 @@ static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset, struct inode *inode = file_inode(iocb->ki_filp); ext4_io_end_t *io_end = iocb->private; - /* if not async direct IO just return */ - if (!io_end) { - inode_dio_done(inode); - if (is_async) - aio_complete(iocb, ret, 0); - return; - } + /* if not async direct IO or dio with 0 bytes write, just return */ + if (!io_end || !size) + goto out; ext_debug("ext4_end_io_dio(): io_end 0x%p " "for inode %lu, iocb 0x%p, offset %llu, size %zd\n", @@ -3092,13 +3076,25 @@ static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset, size); iocb->private = NULL; + + /* if not aio dio with unwritten extents, just free io and return */ + if (!(io_end->flag & EXT4_IO_END_UNWRITTEN)) { + ext4_free_io_end(io_end); +out: + inode_dio_done(inode); + if (is_async) + aio_complete(iocb, ret, 0); + return; + } + io_end->offset = offset; io_end->size = size; if (is_async) { io_end->iocb = iocb; io_end->result = ret; } - ext4_put_io_end_defer(io_end); + + ext4_add_complete_io(io_end); } /* @@ -3132,7 +3128,6 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb, get_block_t *get_block_func = NULL; int dio_flags = 0; loff_t final_size = offset + count; - ext4_io_end_t *io_end = NULL; /* Use the old path for reads and writes beyond i_size. */ if (rw != WRITE || final_size > inode->i_size) @@ -3171,16 +3166,13 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb, iocb->private = NULL; ext4_inode_aio_set(inode, NULL); if (!is_sync_kiocb(iocb)) { - io_end = ext4_init_io_end(inode, GFP_NOFS); + ext4_io_end_t *io_end = ext4_init_io_end(inode, GFP_NOFS); if (!io_end) { ret = -ENOMEM; goto retake_lock; } io_end->flag |= EXT4_IO_END_DIRECT; - /* - * Grab reference for DIO. Will be dropped in ext4_end_io_dio() - */ - iocb->private = ext4_get_io_end(io_end); + iocb->private = io_end; /* * we save the io structure for current async direct * IO, so that later ext4_map_blocks() could flag the @@ -3204,27 +3196,26 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb, NULL, dio_flags); + if (iocb->private) + ext4_inode_aio_set(inode, NULL); /* - * Put our reference to io_end. This can free the io_end structure e.g. - * in sync IO case or in case of error. It can even perform extent - * conversion if all bios we submitted finished before we got here. - * Note that in that case iocb->private can be already set to NULL - * here. + * The io_end structure takes a reference to the inode, that + * structure needs to be destroyed and the reference to the + * inode need to be dropped, when IO is complete, even with 0 + * byte write, or failed. + * + * In the successful AIO DIO case, the io_end structure will + * be destroyed and the reference to the inode will be dropped + * after the end_io call back function is called. + * + * In the case there is 0 byte write, or error case, since VFS + * direct IO won't invoke the end_io call back function, we + * need to free the end_io structure here. */ - if (io_end) { - ext4_inode_aio_set(inode, NULL); - ext4_put_io_end(io_end); - /* - * In case of error or no write ext4_end_io_dio() was not - * called so we have to put iocb's reference. - */ - if (ret <= 0 && ret != -EIOCBQUEUED) { - WARN_ON(iocb->private != io_end); - ext4_put_io_end(io_end); - iocb->private = NULL; - } - } - if (ret > 0 && !overwrite && ext4_test_inode_state(inode, + if (ret != -EIOCBQUEUED && ret <= 0 && iocb->private) { + ext4_free_io_end(iocb->private); + iocb->private = NULL; + } else if (ret > 0 && !overwrite && ext4_test_inode_state(inode, EXT4_STATE_DIO_UNWRITTEN)) { int err; /* diff --git a/fs/ext4/page-io.c b/fs/ext4/page-io.c index 5929cd0baa20..6626aba57ebb 100644 --- a/fs/ext4/page-io.c +++ b/fs/ext4/page-io.c @@ -61,28 +61,15 @@ void ext4_ioend_shutdown(struct inode *inode) cancel_work_sync(&EXT4_I(inode)->i_unwritten_work); } -static void ext4_release_io_end(ext4_io_end_t *io_end) +void ext4_free_io_end(ext4_io_end_t *io) { - BUG_ON(!list_empty(&io_end->list)); - BUG_ON(io_end->flag & EXT4_IO_END_UNWRITTEN); - - if (atomic_dec_and_test(&EXT4_I(io_end->inode)->i_ioend_count)) - wake_up_all(ext4_ioend_wq(io_end->inode)); - if (io_end->flag & EXT4_IO_END_DIRECT) - inode_dio_done(io_end->inode); - if (io_end->iocb) - aio_complete(io_end->iocb, io_end->result, 0); - kmem_cache_free(io_end_cachep, io_end); -} - -static void ext4_clear_io_unwritten_flag(ext4_io_end_t *io_end) -{ - struct inode *inode = io_end->inode; + BUG_ON(!io); + BUG_ON(!list_empty(&io->list)); + BUG_ON(io->flag & EXT4_IO_END_UNWRITTEN); - io_end->flag &= ~EXT4_IO_END_UNWRITTEN; - /* Wake up anyone waiting on unwritten extent conversion */ - if (atomic_dec_and_test(&EXT4_I(inode)->i_unwritten)) - wake_up_all(ext4_ioend_wq(inode)); + if (atomic_dec_and_test(&EXT4_I(io->inode)->i_ioend_count)) + wake_up_all(ext4_ioend_wq(io->inode)); + kmem_cache_free(io_end_cachep, io); } /* check a range of space and convert unwritten extents to written. */ @@ -105,8 +92,13 @@ static int ext4_end_io(ext4_io_end_t *io) "(inode %lu, offset %llu, size %zd, error %d)", inode->i_ino, offset, size, ret); } - ext4_clear_io_unwritten_flag(io); - ext4_release_io_end(io); + /* Wake up anyone waiting on unwritten extent conversion */ + if (atomic_dec_and_test(&EXT4_I(inode)->i_unwritten)) + wake_up_all(ext4_ioend_wq(inode)); + if (io->flag & EXT4_IO_END_DIRECT) + inode_dio_done(inode); + if (io->iocb) + aio_complete(io->iocb, io->result, 0); return ret; } @@ -137,7 +129,7 @@ static void dump_completed_IO(struct inode *inode) } /* Add the io_end to per-inode completed end_io list. */ -static void ext4_add_complete_io(ext4_io_end_t *io_end) +void ext4_add_complete_io(ext4_io_end_t *io_end) { struct ext4_inode_info *ei = EXT4_I(io_end->inode); struct workqueue_struct *wq; @@ -174,6 +166,8 @@ static int ext4_do_flush_completed_IO(struct inode *inode) err = ext4_end_io(io); if (unlikely(!ret && err)) ret = err; + io->flag &= ~EXT4_IO_END_UNWRITTEN; + ext4_free_io_end(io); } return ret; } @@ -205,43 +199,10 @@ ext4_io_end_t *ext4_init_io_end(struct inode *inode, gfp_t flags) atomic_inc(&EXT4_I(inode)->i_ioend_count); io->inode = inode; INIT_LIST_HEAD(&io->list); - atomic_set(&io->count, 1); } return io; } -void ext4_put_io_end_defer(ext4_io_end_t *io_end) -{ - if (atomic_dec_and_test(&io_end->count)) { - if (!(io_end->flag & EXT4_IO_END_UNWRITTEN) || !io_end->size) { - ext4_release_io_end(io_end); - return; - } - ext4_add_complete_io(io_end); - } -} - -int ext4_put_io_end(ext4_io_end_t *io_end) -{ - int err = 0; - - if (atomic_dec_and_test(&io_end->count)) { - if (io_end->flag & EXT4_IO_END_UNWRITTEN) { - err = ext4_convert_unwritten_extents(io_end->inode, - io_end->offset, io_end->size); - ext4_clear_io_unwritten_flag(io_end); - } - ext4_release_io_end(io_end); - } - return err; -} - -ext4_io_end_t *ext4_get_io_end(ext4_io_end_t *io_end) -{ - atomic_inc(&io_end->count); - return io_end; -} - /* * Print an buffer I/O error compatible with the fs/buffer.c. This * provides compatibility with dmesg scrapers that look for a specific @@ -324,7 +285,12 @@ static void ext4_end_bio(struct bio *bio, int error) bi_sector >> (inode->i_blkbits - 9)); } - ext4_put_io_end_defer(io_end); + if (!(io_end->flag & EXT4_IO_END_UNWRITTEN)) { + ext4_free_io_end(io_end); + return; + } + + ext4_add_complete_io(io_end); } void ext4_io_submit(struct ext4_io_submit *io) @@ -338,37 +304,40 @@ void ext4_io_submit(struct ext4_io_submit *io) bio_put(io->io_bio); } io->io_bio = NULL; -} - -void ext4_io_submit_init(struct ext4_io_submit *io, - struct writeback_control *wbc) -{ - io->io_op = (wbc->sync_mode == WB_SYNC_ALL ? WRITE_SYNC : WRITE); - io->io_bio = NULL; + io->io_op = 0; io->io_end = NULL; } -static int io_submit_init_bio(struct ext4_io_submit *io, - struct buffer_head *bh) +static int io_submit_init(struct ext4_io_submit *io, + struct inode *inode, + struct writeback_control *wbc, + struct buffer_head *bh) { + ext4_io_end_t *io_end; + struct page *page = bh->b_page; int nvecs = bio_get_nr_vecs(bh->b_bdev); struct bio *bio; + io_end = ext4_init_io_end(inode, GFP_NOFS); + if (!io_end) + return -ENOMEM; bio = bio_alloc(GFP_NOIO, min(nvecs, BIO_MAX_PAGES)); bio->bi_sector = bh->b_blocknr * (bh->b_size >> 9); bio->bi_bdev = bh->b_bdev; + bio->bi_private = io->io_end = io_end; bio->bi_end_io = ext4_end_bio; - bio->bi_private = ext4_get_io_end(io->io_end); - if (!io->io_end->size) - io->io_end->offset = (bh->b_page->index << PAGE_CACHE_SHIFT) - + bh_offset(bh); + + io_end->offset = (page->index << PAGE_CACHE_SHIFT) + bh_offset(bh); + io->io_bio = bio; + io->io_op = (wbc->sync_mode == WB_SYNC_ALL ? WRITE_SYNC : WRITE); io->io_next_block = bh->b_blocknr; return 0; } static int io_submit_add_bh(struct ext4_io_submit *io, struct inode *inode, + struct writeback_control *wbc, struct buffer_head *bh) { ext4_io_end_t *io_end; @@ -379,18 +348,18 @@ submit_and_retry: ext4_io_submit(io); } if (io->io_bio == NULL) { - ret = io_submit_init_bio(io, bh); + ret = io_submit_init(io, inode, wbc, bh); if (ret) return ret; } - ret = bio_add_page(io->io_bio, bh->b_page, bh->b_size, bh_offset(bh)); - if (ret != bh->b_size) - goto submit_and_retry; io_end = io->io_end; if (test_clear_buffer_uninit(bh)) ext4_set_io_unwritten_flag(inode, io_end); - io_end->size += bh->b_size; + io->io_end->size += bh->b_size; io->io_next_block++; + ret = bio_add_page(io->io_bio, bh->b_page, bh->b_size, bh_offset(bh)); + if (ret != bh->b_size) + goto submit_and_retry; return 0; } @@ -462,7 +431,7 @@ int ext4_bio_write_page(struct ext4_io_submit *io, do { if (!buffer_async_write(bh)) continue; - ret = io_submit_add_bh(io, inode, bh); + ret = io_submit_add_bh(io, inode, wbc, bh); if (ret) { /* * We only get here on ENOMEM. Not much else -- cgit v1.2.3 From 4849625569874d474ce351efd84b1f487ba08c94 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 8 May 2013 21:08:22 +0000 Subject: net: fec: enable hardware checksum only on imx6q-fec Commit 4c09eed (net: fec: Enable imx6 enet checksum acceleration.) enables hardware checksum acceleration unconditionally for all fec variants. This is inappropriate, because some variants like imx5 have no such support on hardware. Consequently, fec is broken on these platforms. Fix it by enabling hardware checksum only on imx6q-fec type of controllers. Signed-off-by: Shawn Guo Reviewed-by: Jim Baxter Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index aff0310a778b..ca9825ca88c9 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -87,6 +87,8 @@ #define FEC_QUIRK_HAS_GBIT (1 << 3) /* Controller has extend desc buffer */ #define FEC_QUIRK_HAS_BUFDESC_EX (1 << 4) +/* Controller has hardware checksum support */ +#define FEC_QUIRK_HAS_CSUM (1 << 5) static struct platform_device_id fec_devtype[] = { { @@ -105,7 +107,7 @@ static struct platform_device_id fec_devtype[] = { }, { .name = "imx6q-fec", .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT | - FEC_QUIRK_HAS_BUFDESC_EX, + FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM, }, { .name = "mvf-fec", .driver_data = FEC_QUIRK_ENET_MAC, @@ -1744,6 +1746,8 @@ static const struct net_device_ops fec_netdev_ops = { static int fec_enet_init(struct net_device *ndev) { struct fec_enet_private *fep = netdev_priv(ndev); + const struct platform_device_id *id_entry = + platform_get_device_id(fep->pdev); struct bufdesc *cbd_base; /* Allocate memory for buffer descriptors. */ @@ -1775,12 +1779,14 @@ static int fec_enet_init(struct net_device *ndev) writel(FEC_RX_DISABLED_IMASK, fep->hwp + FEC_IMASK); netif_napi_add(ndev, &fep->napi, fec_enet_rx_napi, FEC_NAPI_WEIGHT); - /* enable hw accelerator */ - ndev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM - | NETIF_F_RXCSUM); - ndev->hw_features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM - | NETIF_F_RXCSUM); - fep->csum_flags |= FLAG_RX_CSUM_ENABLED; + if (id_entry->driver_data & FEC_QUIRK_HAS_CSUM) { + /* enable hw accelerator */ + ndev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM + | NETIF_F_RXCSUM); + ndev->hw_features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM + | NETIF_F_RXCSUM); + fep->csum_flags |= FLAG_RX_CSUM_ENABLED; + } fec_restart(ndev, 0); -- cgit v1.2.3 From 4e8cf5b8a1da8dbe1ece5f084b99f5c902ea709b Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Wed, 8 May 2013 22:22:34 +0000 Subject: net/mlx4_core: Add missing report on VST and spoof-checking dev caps Commits e6b6a23 "net/mlx4: Add VF MAC spoof checking support" and 3f7fb021 "net/mlx4: Add set VF default vlan ID and priority support" missed reporting in the device capabilities dump when these features are actually supported. Also two too noisy debug messages which produce message on every QP opened by a VF, were left in the code, fix that. Signed-off-by: Rony Efraim Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/fw.c | 4 +++- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 9 --------- 2 files changed, 3 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c index b147bdd40768..58a8e535d698 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw.c +++ b/drivers/net/ethernet/mellanox/mlx4/fw.c @@ -131,7 +131,9 @@ static void dump_dev_cap_flags2(struct mlx4_dev *dev, u64 flags) [2] = "RSS XOR Hash Function support", [3] = "Device manage flow steering support", [4] = "Automatic MAC reassignment support", - [5] = "Time stamping support" + [5] = "Time stamping support", + [6] = "VST (control vlan insertion/stripping) support", + [7] = "FSM (MAC anti-spoofing) support" }; int i; diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index e12e0d2e0ee0..d4a9de666fbd 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -377,19 +377,10 @@ static int update_vport_qp_param(struct mlx4_dev *dev, qpc->pri_path.feup |= 1 << 3; /* set fvl bit */ qpc->pri_path.sched_queue &= 0xC7; qpc->pri_path.sched_queue |= (vp_oper->state.default_qos) << 3; - mlx4_dbg(dev, "qp %d port %d Q 0x%x set vlan to %d vidx %d feup %x fl %x\n", - be32_to_cpu(qpc->local_qpn) & 0xffffff, port, - (int)(qpc->pri_path.sched_queue), vp_oper->state.default_vlan, - vp_oper->vlan_idx, (int)(qpc->pri_path.feup), - (int)(qpc->pri_path.fl)); } if (vp_oper->state.spoofchk) { qpc->pri_path.feup |= 1 << 5; /* set fsm bit */; qpc->pri_path.grh_mylmc = (0x80 & qpc->pri_path.grh_mylmc) + vp_oper->mac_idx; - mlx4_dbg(dev, "spoof qp %d port %d feup 0x%x, myLmc 0x%x mindx %d\n", - be32_to_cpu(qpc->local_qpn) & 0xffffff, port, - (int)qpc->pri_path.feup, (int)qpc->pri_path.grh_mylmc, - vp_oper->mac_idx); } return 0; } -- cgit v1.2.3 From 7677fc965fba41d1386fa3b76a1f00303f02bb2d Mon Sep 17 00:00:00 2001 From: Rony Efraim Date: Wed, 8 May 2013 22:22:35 +0000 Subject: net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode Make sure that the following steps are taken: - drop packets sent by the VF with vlan tag - block packets with vlan tag which are steered to the VF - drop/block tagged packets when the policy is priority-tagged - make sure VLAN stripping for received packets is set - make sure force UP bit for the VF QP is set Use enum values for all the above instead of numerical bit offsets. Signed-off-by: Rony Efraim Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_resources.c | 2 +- .../net/ethernet/mellanox/mlx4/resource_tracker.c | 20 ++++++++++++--- include/linux/mlx4/qp.h | 29 ++++++++++++++++++++-- 3 files changed, 45 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_resources.c b/drivers/net/ethernet/mellanox/mlx4/en_resources.c index 91f2b2c43c12..d3f508697a3d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_resources.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_resources.c @@ -60,7 +60,7 @@ void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride, context->pri_path.sched_queue = 0x83 | (priv->port - 1) << 6; if (user_prio >= 0) { context->pri_path.sched_queue |= user_prio << 3; - context->pri_path.feup = 1 << 6; + context->pri_path.feup = MLX4_FEUP_FORCE_ETH_UP; } context->pri_path.counter_index = 0xff; context->cqn_send = cpu_to_be32(cqn); diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index d4a9de666fbd..1157f028a90f 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -372,14 +372,28 @@ static int update_vport_qp_param(struct mlx4_dev *dev, if (MLX4_QP_ST_RC == qp_type) return -EINVAL; + /* force strip vlan by clear vsd */ + qpc->param3 &= ~cpu_to_be32(MLX4_STRIP_VLAN); + if (0 != vp_oper->state.default_vlan) { + qpc->pri_path.vlan_control = + MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED | + MLX4_VLAN_CTRL_ETH_RX_BLOCK_PRIO_TAGGED | + MLX4_VLAN_CTRL_ETH_RX_BLOCK_UNTAGGED; + } else { /* priority tagged */ + qpc->pri_path.vlan_control = + MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED | + MLX4_VLAN_CTRL_ETH_RX_BLOCK_TAGGED; + } + + qpc->pri_path.fvl_rx |= MLX4_FVL_RX_FORCE_ETH_VLAN; qpc->pri_path.vlan_index = vp_oper->vlan_idx; - qpc->pri_path.fl = (1 << 6) | (1 << 2); /* set cv bit and hide_cqe_vlan bit*/ - qpc->pri_path.feup |= 1 << 3; /* set fvl bit */ + qpc->pri_path.fl |= MLX4_FL_CV | MLX4_FL_ETH_HIDE_CQE_VLAN; + qpc->pri_path.feup |= MLX4_FEUP_FORCE_ETH_UP | MLX4_FVL_FORCE_ETH_VLAN; qpc->pri_path.sched_queue &= 0xC7; qpc->pri_path.sched_queue |= (vp_oper->state.default_qos) << 3; } if (vp_oper->state.spoofchk) { - qpc->pri_path.feup |= 1 << 5; /* set fsm bit */; + qpc->pri_path.feup |= MLX4_FSM_FORCE_ETH_SRC_MAC; qpc->pri_path.grh_mylmc = (0x80 & qpc->pri_path.grh_mylmc) + vp_oper->mac_idx; } return 0; diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h index 67f46ad6920a..352eec9df1b8 100644 --- a/include/linux/mlx4/qp.h +++ b/include/linux/mlx4/qp.h @@ -126,7 +126,7 @@ struct mlx4_rss_context { struct mlx4_qp_path { u8 fl; - u8 reserved1[1]; + u8 vlan_control; u8 disable_pkey_check; u8 pkey_index; u8 counter_index; @@ -141,11 +141,32 @@ struct mlx4_qp_path { u8 sched_queue; u8 vlan_index; u8 feup; - u8 reserved3; + u8 fvl_rx; u8 reserved4[2]; u8 dmac[6]; }; +enum { /* fl */ + MLX4_FL_CV = 1 << 6, + MLX4_FL_ETH_HIDE_CQE_VLAN = 1 << 2 +}; +enum { /* vlan_control */ + MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED = 1 << 6, + MLX4_VLAN_CTRL_ETH_RX_BLOCK_TAGGED = 1 << 2, + MLX4_VLAN_CTRL_ETH_RX_BLOCK_PRIO_TAGGED = 1 << 1, /* 802.1p priority tag */ + MLX4_VLAN_CTRL_ETH_RX_BLOCK_UNTAGGED = 1 << 0 +}; + +enum { /* feup */ + MLX4_FEUP_FORCE_ETH_UP = 1 << 6, /* force Eth UP */ + MLX4_FSM_FORCE_ETH_SRC_MAC = 1 << 5, /* force Source MAC */ + MLX4_FVL_FORCE_ETH_VLAN = 1 << 3 /* force Eth vlan */ +}; + +enum { /* fvl_rx */ + MLX4_FVL_RX_FORCE_ETH_VLAN = 1 << 0 /* enforce Eth rx vlan */ +}; + struct mlx4_qp_context { __be32 flags; __be32 pd; @@ -185,6 +206,10 @@ struct mlx4_qp_context { u32 reserved5[10]; }; +enum { /* param3 */ + MLX4_STRIP_VLAN = 1 << 30 +}; + /* Which firmware version adds support for NEC (NoErrorCompletion) bit */ #define MLX4_FW_VER_WQE_CTRL_NEC mlx4_fw_ver(2, 2, 232) -- cgit v1.2.3 From 2fbd967973ae6ae1a989f5638da8bbed93cad2c5 Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Wed, 8 May 2013 23:19:42 +0000 Subject: ipv4: ip_output: remove inline marking of EXPORT_SYMBOL functions EXPORT_SYMBOL and inline directives are contradictory to each other. The patch fixes this inconsistency. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov Signed-off-by: David S. Miller --- net/ipv4/ip_output.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 147abf5275aa..4bcabf3ab4ca 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -84,7 +84,7 @@ int sysctl_ip_default_ttl __read_mostly = IPDEFTTL; EXPORT_SYMBOL(sysctl_ip_default_ttl); /* Generate a checksum for an outgoing IP datagram. */ -__inline__ void ip_send_check(struct iphdr *iph) +void ip_send_check(struct iphdr *iph) { iph->check = 0; iph->check = ip_fast_csum((unsigned char *)iph, iph->ihl); -- cgit v1.2.3 From 52c07423a819091b0fe9abbf26977098b996f85b Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Sat, 11 May 2013 16:16:49 -0700 Subject: target/rd: Add ramdisk bit for NULLIO operation This patch adds a rd_nullio parameter that allows RAMDISK_MCP backends to function in NULLIO mode, where all se_cmd I/O is immediately completed in rd_execute_rw() without actually performing the SGL memory copy. This is useful for performance testing when the ramdisk SGL memory copy begins to eat lots of cycles during heavy small block workloads, so allow this bit to be enabled when necessary on a per rd_dev basis. Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_rd.c | 21 ++++++++++++++++++--- drivers/target/target_core_rd.h | 1 + 2 files changed, 19 insertions(+), 3 deletions(-) diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c index e0b3c379aa14..0921a64b5550 100644 --- a/drivers/target/target_core_rd.c +++ b/drivers/target/target_core_rd.c @@ -291,6 +291,11 @@ rd_execute_rw(struct se_cmd *cmd) u32 src_len; u64 tmp; + if (dev->rd_flags & RDF_NULLIO) { + target_complete_cmd(cmd, SAM_STAT_GOOD); + return 0; + } + tmp = cmd->t_task_lba * se_dev->dev_attrib.block_size; rd_offset = do_div(tmp, PAGE_SIZE); rd_page = tmp; @@ -373,11 +378,12 @@ rd_execute_rw(struct se_cmd *cmd) } enum { - Opt_rd_pages, Opt_err + Opt_rd_pages, Opt_rd_nullio, Opt_err }; static match_table_t tokens = { {Opt_rd_pages, "rd_pages=%d"}, + {Opt_rd_nullio, "rd_nullio=%d"}, {Opt_err, NULL} }; @@ -408,6 +414,14 @@ static ssize_t rd_set_configfs_dev_params(struct se_device *dev, " Count: %u\n", rd_dev->rd_page_count); rd_dev->rd_flags |= RDF_HAS_PAGE_COUNT; break; + case Opt_rd_nullio: + match_int(args, &arg); + if (arg != 1) + break; + + pr_debug("RAMDISK: Setting NULLIO flag: %d\n", arg); + rd_dev->rd_flags |= RDF_NULLIO; + break; default: break; } @@ -424,8 +438,9 @@ static ssize_t rd_show_configfs_dev_params(struct se_device *dev, char *b) ssize_t bl = sprintf(b, "TCM RamDisk ID: %u RamDisk Makeup: rd_mcp\n", rd_dev->rd_dev_id); bl += sprintf(b + bl, " PAGES/PAGE_SIZE: %u*%lu" - " SG_table_count: %u\n", rd_dev->rd_page_count, - PAGE_SIZE, rd_dev->sg_table_count); + " SG_table_count: %u nullio: %d\n", rd_dev->rd_page_count, + PAGE_SIZE, rd_dev->sg_table_count, + !!(rd_dev->rd_flags & RDF_NULLIO)); return bl; } diff --git a/drivers/target/target_core_rd.h b/drivers/target/target_core_rd.h index 933b38b6e563..1789d1e14395 100644 --- a/drivers/target/target_core_rd.h +++ b/drivers/target/target_core_rd.h @@ -22,6 +22,7 @@ struct rd_dev_sg_table { } ____cacheline_aligned; #define RDF_HAS_PAGE_COUNT 0x01 +#define RDF_NULLIO 0x02 struct rd_dev { struct se_device dev; -- cgit v1.2.3 From 233c7df0821c4190e2d3f4be0f2ca0ab40a5ed8c Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 9 May 2013 04:23:40 +0000 Subject: macvlan: fix passthru mode race between dev removal and rx path Currently, if macvlan in passthru mode is created and data are rxed and you remove this device, following panic happens: NULL pointer dereference at 0000000000000198 IP: [] macvlan_handle_frame+0x153/0x1f7 [macvlan] I'm using following script to trigger this: I run this script while "ping -f" is running on another machine to send packets to e1 rx. Reason of the panic is that list_first_entry() is blindly called in macvlan_handle_frame() even if the list was empty. vlan is set to incorrect pointer which leads to the crash. I'm fixing this by protecting port->vlans list by rcu and by preventing from getting incorrect pointer in case the list is empty. Introduced by: commit eb06acdc85585f2 "macvlan: Introduce 'passthru' mode to takeover the underlying device" Signed-off-by: Jiri Pirko Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index d5a141c7c4e7..1c502bb0c916 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -229,7 +229,8 @@ static rx_handler_result_t macvlan_handle_frame(struct sk_buff **pskb) } if (port->passthru) - vlan = list_first_entry(&port->vlans, struct macvlan_dev, list); + vlan = list_first_or_null_rcu(&port->vlans, + struct macvlan_dev, list); else vlan = macvlan_hash_lookup(port, eth->h_dest); if (vlan == NULL) @@ -814,7 +815,7 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev, if (err < 0) goto upper_dev_unlink; - list_add_tail(&vlan->list, &port->vlans); + list_add_tail_rcu(&vlan->list, &port->vlans); netif_stacked_transfer_operstate(lowerdev, dev); return 0; @@ -842,7 +843,7 @@ void macvlan_dellink(struct net_device *dev, struct list_head *head) { struct macvlan_dev *vlan = netdev_priv(dev); - list_del(&vlan->list); + list_del_rcu(&vlan->list); unregister_netdevice_queue(dev, head); netdev_upper_dev_unlink(vlan->lowerdev, dev); } -- cgit v1.2.3 From af40bb0b2e9d7591a3e7c4e1a1800212aa004dff Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Sat, 11 May 2013 16:24:21 -0700 Subject: iscsi-target: Fix typos in RDMAEXTENSIONS macro usage This patch fixes a handful of typos in 'RDMAEXTENTIONS' -> 'RDMAEXTENSIONS' macro usage. Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_parameters.c | 8 ++++---- drivers/target/iscsi/iscsi_target_parameters.h | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c index f690be9e5293..c2185fc31136 100644 --- a/drivers/target/iscsi/iscsi_target_parameters.c +++ b/drivers/target/iscsi/iscsi_target_parameters.c @@ -436,7 +436,7 @@ int iscsi_create_default_params(struct iscsi_param_list **param_list_ptr) /* * Extra parameters for ISER from RFC-5046 */ - param = iscsi_set_default_param(pl, RDMAEXTENTIONS, INITIAL_RDMAEXTENTIONS, + param = iscsi_set_default_param(pl, RDMAEXTENSIONS, INITIAL_RDMAEXTENSIONS, PHASE_OPERATIONAL, SCOPE_SESSION_WIDE, SENDER_BOTH, TYPERANGE_BOOL_AND, USE_LEADING_ONLY); if (!param) @@ -529,7 +529,7 @@ int iscsi_set_keys_to_negotiate( SET_PSTATE_NEGOTIATE(param); } else if (!strcmp(param->name, OFMARKINT)) { SET_PSTATE_NEGOTIATE(param); - } else if (!strcmp(param->name, RDMAEXTENTIONS)) { + } else if (!strcmp(param->name, RDMAEXTENSIONS)) { if (iser == true) SET_PSTATE_NEGOTIATE(param); } else if (!strcmp(param->name, INITIATORRECVDATASEGMENTLENGTH)) { @@ -580,7 +580,7 @@ int iscsi_set_keys_irrelevant_for_discovery( param->state &= ~PSTATE_NEGOTIATE; else if (!strcmp(param->name, OFMARKINT)) param->state &= ~PSTATE_NEGOTIATE; - else if (!strcmp(param->name, RDMAEXTENTIONS)) + else if (!strcmp(param->name, RDMAEXTENSIONS)) param->state &= ~PSTATE_NEGOTIATE; else if (!strcmp(param->name, INITIATORRECVDATASEGMENTLENGTH)) param->state &= ~PSTATE_NEGOTIATE; @@ -1977,7 +1977,7 @@ void iscsi_set_session_parameters( ops->SessionType = !strcmp(param->value, DISCOVERY); pr_debug("SessionType: %s\n", param->value); - } else if (!strcmp(param->name, RDMAEXTENTIONS)) { + } else if (!strcmp(param->name, RDMAEXTENSIONS)) { ops->RDMAExtensions = !strcmp(param->value, YES); pr_debug("RDMAExtensions: %s\n", param->value); diff --git a/drivers/target/iscsi/iscsi_target_parameters.h b/drivers/target/iscsi/iscsi_target_parameters.h index f31b9c4b83f2..915b06798505 100644 --- a/drivers/target/iscsi/iscsi_target_parameters.h +++ b/drivers/target/iscsi/iscsi_target_parameters.h @@ -91,7 +91,7 @@ extern void iscsi_set_session_parameters(struct iscsi_sess_ops *, /* * Parameter names of iSCSI Extentions for RDMA (iSER). See RFC-5046 */ -#define RDMAEXTENTIONS "RDMAExtensions" +#define RDMAEXTENSIONS "RDMAExtensions" #define INITIATORRECVDATASEGMENTLENGTH "InitiatorRecvDataSegmentLength" #define TARGETRECVDATASEGMENTLENGTH "TargetRecvDataSegmentLength" @@ -142,7 +142,7 @@ extern void iscsi_set_session_parameters(struct iscsi_sess_ops *, /* * Initial values for iSER parameters following RFC-5046 Section 6 */ -#define INITIAL_RDMAEXTENTIONS NO +#define INITIAL_RDMAEXTENSIONS NO #define INITIAL_INITIATORRECVDATASEGMENTLENGTH "262144" #define INITIAL_TARGETRECVDATASEGMENTLENGTH "8192" -- cgit v1.2.3 From f77d602124d865c38705df7fa25c03de9c284ad2 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 9 May 2013 10:28:16 +0000 Subject: ipv6: do not clear pinet6 field We have seen multiple NULL dereferences in __inet6_lookup_established() After analysis, I found that inet6_sk() could be NULL while the check for sk_family == AF_INET6 was true. Bug was added in linux-2.6.29 when RCU lookups were introduced in UDP and TCP stacks. Once an IPv6 socket, using SLAB_DESTROY_BY_RCU is inserted in a hash table, we no longer can clear pinet6 field. This patch extends logic used in commit fcbdf09d9652c891 ("net: fix nulls list corruptions in sk_prot_alloc") TCP/UDP/UDPLite IPv6 protocols provide their own .clear_sk() method to make sure we do not clear pinet6 field. At socket clone phase, we do not really care, as cloning the parent (non NULL) pinet6 is not adding a fatal race. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/sock.h | 12 ++++++++++++ net/core/sock.c | 12 ------------ net/ipv6/tcp_ipv6.c | 12 ++++++++++++ net/ipv6/udp.c | 13 ++++++++++++- net/ipv6/udp_impl.h | 2 ++ net/ipv6/udplite.c | 2 +- 6 files changed, 39 insertions(+), 14 deletions(-) diff --git a/include/net/sock.h b/include/net/sock.h index 5c97b0fc5623..66772cf8c3c5 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -866,6 +866,18 @@ struct inet_hashinfo; struct raw_hashinfo; struct module; +/* + * caches using SLAB_DESTROY_BY_RCU should let .next pointer from nulls nodes + * un-modified. Special care is taken when initializing object to zero. + */ +static inline void sk_prot_clear_nulls(struct sock *sk, int size) +{ + if (offsetof(struct sock, sk_node.next) != 0) + memset(sk, 0, offsetof(struct sock, sk_node.next)); + memset(&sk->sk_node.pprev, 0, + size - offsetof(struct sock, sk_node.pprev)); +} + /* Networking protocol blocks we attach to sockets. * socket layer -> transport layer interface * transport -> network interface is defined by struct inet_proto diff --git a/net/core/sock.c b/net/core/sock.c index d4f4cea726e7..6ba327da79e1 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1217,18 +1217,6 @@ static void sock_copy(struct sock *nsk, const struct sock *osk) #endif } -/* - * caches using SLAB_DESTROY_BY_RCU should let .next pointer from nulls nodes - * un-modified. Special care is taken when initializing object to zero. - */ -static inline void sk_prot_clear_nulls(struct sock *sk, int size) -{ - if (offsetof(struct sock, sk_node.next) != 0) - memset(sk, 0, offsetof(struct sock, sk_node.next)); - memset(&sk->sk_node.pprev, 0, - size - offsetof(struct sock, sk_node.pprev)); -} - void sk_prot_clear_portaddr_nulls(struct sock *sk, int size) { unsigned long nulls1, nulls2; diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 71167069b394..0a17ed9eaf39 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1890,6 +1890,17 @@ void tcp6_proc_exit(struct net *net) } #endif +static void tcp_v6_clear_sk(struct sock *sk, int size) +{ + struct inet_sock *inet = inet_sk(sk); + + /* we do not want to clear pinet6 field, because of RCU lookups */ + sk_prot_clear_nulls(sk, offsetof(struct inet_sock, pinet6)); + + size -= offsetof(struct inet_sock, pinet6) + sizeof(inet->pinet6); + memset(&inet->pinet6 + 1, 0, size); +} + struct proto tcpv6_prot = { .name = "TCPv6", .owner = THIS_MODULE, @@ -1933,6 +1944,7 @@ struct proto tcpv6_prot = { #ifdef CONFIG_MEMCG_KMEM .proto_cgroup = tcp_proto_cgroup, #endif + .clear_sk = tcp_v6_clear_sk, }; static const struct inet6_protocol tcpv6_protocol = { diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index d4defdd44937..42923b14dfa6 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -1432,6 +1432,17 @@ void udp6_proc_exit(struct net *net) { } #endif /* CONFIG_PROC_FS */ +void udp_v6_clear_sk(struct sock *sk, int size) +{ + struct inet_sock *inet = inet_sk(sk); + + /* we do not want to clear pinet6 field, because of RCU lookups */ + sk_prot_clear_portaddr_nulls(sk, offsetof(struct inet_sock, pinet6)); + + size -= offsetof(struct inet_sock, pinet6) + sizeof(inet->pinet6); + memset(&inet->pinet6 + 1, 0, size); +} + /* ------------------------------------------------------------------------ */ struct proto udpv6_prot = { @@ -1462,7 +1473,7 @@ struct proto udpv6_prot = { .compat_setsockopt = compat_udpv6_setsockopt, .compat_getsockopt = compat_udpv6_getsockopt, #endif - .clear_sk = sk_prot_clear_portaddr_nulls, + .clear_sk = udp_v6_clear_sk, }; static struct inet_protosw udpv6_protosw = { diff --git a/net/ipv6/udp_impl.h b/net/ipv6/udp_impl.h index d7571046bfc4..4691ed50a928 100644 --- a/net/ipv6/udp_impl.h +++ b/net/ipv6/udp_impl.h @@ -31,6 +31,8 @@ extern int udpv6_recvmsg(struct kiocb *iocb, struct sock *sk, extern int udpv6_queue_rcv_skb(struct sock * sk, struct sk_buff *skb); extern void udpv6_destroy_sock(struct sock *sk); +extern void udp_v6_clear_sk(struct sock *sk, int size); + #ifdef CONFIG_PROC_FS extern int udp6_seq_show(struct seq_file *seq, void *v); #endif diff --git a/net/ipv6/udplite.c b/net/ipv6/udplite.c index 1d08e21d9f69..dfcc4be46898 100644 --- a/net/ipv6/udplite.c +++ b/net/ipv6/udplite.c @@ -56,7 +56,7 @@ struct proto udplitev6_prot = { .compat_setsockopt = compat_udpv6_setsockopt, .compat_getsockopt = compat_udpv6_getsockopt, #endif - .clear_sk = sk_prot_clear_portaddr_nulls, + .clear_sk = udp_v6_clear_sk, }; static struct inet_protosw udplite6_protosw = { -- cgit v1.2.3 From 452cf3241a40a372ca5382bd8b51274115beb6de Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Sat, 11 May 2013 16:27:56 -0700 Subject: MAINTAINERS: Update target git tree URL Signed-off-by: Nicholas Bellinger --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 50b4d735f961..0b5e7c5ded1a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7722,7 +7722,7 @@ L: linux-scsi@vger.kernel.org L: target-devel@vger.kernel.org L: http://groups.google.com/group/linux-iscsi-target-dev W: http://www.linux-iscsi.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/nab/lio-core.git master +T: git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master S: Supported F: drivers/target/ F: include/target/ -- cgit v1.2.3 From 3b76b3c37b89302db188b743f2f7b31aa666bb00 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 May 2013 11:04:45 +0000 Subject: net/ethernet: NET_CALXEDA_XGMAC should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `xgmac_xmit': drivers/net/ethernet/calxeda/xgmac.c:1102: undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven Cc: Rob Herring Cc: David S. Miller Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/ethernet/calxeda/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/calxeda/Kconfig b/drivers/net/ethernet/calxeda/Kconfig index aba435c3d4ae..184a063bed5f 100644 --- a/drivers/net/ethernet/calxeda/Kconfig +++ b/drivers/net/ethernet/calxeda/Kconfig @@ -1,6 +1,6 @@ config NET_CALXEDA_XGMAC tristate "Calxeda 1G/10G XGMAC Ethernet driver" - depends on HAS_IOMEM + depends on HAS_IOMEM && HAS_DMA select CRC32 help This is the driver for the XGMAC Ethernet IP block found on Calxeda -- cgit v1.2.3 From fd1eb9e660c7521884387eaf45c12e5225e4ccfb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 May 2013 11:04:46 +0000 Subject: net/ethernet: STMMAC_ETH should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `dma_free_tx_skbufs': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1141: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `dma_free_rx_skbufs': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1120: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `free_dma_desc_resources': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1159: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `stmmac_init_rx_buffers': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:980: undefined reference to `dma_map_single' drivers/built-in.o: In function `init_dma_desc_rings': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1015: undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `stmmac_tx_clean': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1250: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `stmmac_rx': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2044: undefined reference to `dma_unmap_single' drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2082: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `stmmac_rx_refill': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1967: undefined reference to `dma_map_single' drivers/built-in.o: In function `stmmac_xmit': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1845: undefined reference to `dma_map_single' drivers/built-in.o: In function `skb_frag_dma_map': include/linux/skbuff.h:2184: undefined reference to `dma_map_page' drivers/built-in.o: In function `stmmac_jumbo_frm': drivers/net/ethernet/stmicro/stmmac/ring_mode.c:40: undefined reference to `dma_map_single' drivers/built-in.o: In function `stmmac_jumbo_frm': drivers/net/ethernet/stmicro/stmmac/chain_mode.c:48: undefined reference to `dma_map_single' drivers/net/ethernet/stmicro/stmmac/chain_mode.c:55: undefined reference to `dma_map_single' Signed-off-by: Geert Uytterhoeven Cc: Giuseppe Cavallaro Cc: David S. Miller Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index f695a50bac47..43c1f3223322 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -1,6 +1,6 @@ config STMMAC_ETH tristate "STMicroelectronics 10/100/1000 Ethernet driver" - depends on HAS_IOMEM + depends on HAS_IOMEM && HAS_DMA select NET_CORE select MII select PHYLIB -- cgit v1.2.3 From 4837ef42fff894f6ad2bc65431455bc5d9259431 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 May 2013 11:04:47 +0000 Subject: net/wireless: ATH9K should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `ath9k_beacon_generate': drivers/net/wireless/ath/ath9k/beacon.c:146: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath9k/beacon.c:174: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/beacon.c:176: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath9k_beacon_remove_slot': drivers/net/wireless/ath/ath9k/beacon.c:252: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_descdma_setup': drivers/net/wireless/ath/ath9k/init.c:382: undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `ath_edma_get_buffers': drivers/net/wireless/ath/ath9k/recv.c:616: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_get_next_rx_buf': drivers/net/wireless/ath/ath9k/recv.c:740: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_rx_edma_cleanup': drivers/net/wireless/ath/ath9k/recv.c:176: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_cleanup': drivers/net/wireless/ath/ath9k/recv.c:340: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_edma_buf_link': drivers/net/wireless/ath/ath9k/recv.c:122: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_rx_tasklet': drivers/net/wireless/ath/ath9k/recv.c:1275: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:1277: undefined reference to `dma_mapping_error' drivers/net/wireless/ath/ath9k/recv.c:1283: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_edma_init': drivers/net/wireless/ath/ath9k/recv.c:226: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:229: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath_rx_init': drivers/net/wireless/ath/ath9k/recv.c:303: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:306: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath_tx_complete_buf': drivers/net/wireless/ath/ath9k/xmit.c:2088: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_txstatus_setup': drivers/net/wireless/ath/ath9k/xmit.c:2344: undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `ath_tx_set_retry': drivers/net/wireless/ath/ath9k/xmit.c:307: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_tx_setup_buffer': drivers/net/wireless/ath/ath9k/xmit.c:1887: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/xmit.c:1889: undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven Cc: Luis R. Rodriguez Cc: John W. Linville Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/wireless/ath/ath9k/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index 17507dc8a1e7..f3dc124c60c7 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -17,7 +17,7 @@ config ATH9K_BTCOEX_SUPPORT config ATH9K tristate "Atheros 802.11n wireless cards support" - depends on MAC80211 + depends on MAC80211 && HAS_DMA select ATH9K_HW select MAC80211_LEDS select LEDS_CLASS -- cgit v1.2.3 From d914ae80b93c8ae8b1c9c55cf431426eff3982dc Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 May 2013 11:04:49 +0000 Subject: net/ethernet: ARM_AT91_ETHER should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `at91ether_start': drivers/net/ethernet/cadence/at91_ether.c:49: undefined reference to `dma_alloc_coherent' drivers/net/ethernet/cadence/at91_ether.c:60: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `at91ether_interrupt': drivers/net/ethernet/cadence/at91_ether.c:250: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `at91ether_start_xmit': drivers/net/ethernet/cadence/at91_ether.c:169: undefined reference to `dma_map_single' drivers/built-in.o: In function `at91ether_close': drivers/net/ethernet/cadence/at91_ether.c:145: undefined reference to `dma_free_coherent' Signed-off-by: Geert Uytterhoeven Cc: Nicolas Ferre Cc: David S. Miller Cc: netdev@vger.kernel.org Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig index 1194446f859a..0d9d6e64d26f 100644 --- a/drivers/net/ethernet/cadence/Kconfig +++ b/drivers/net/ethernet/cadence/Kconfig @@ -22,7 +22,7 @@ if NET_CADENCE config ARM_AT91_ETHER tristate "AT91RM9200 Ethernet support" - depends on GENERIC_HARDIRQS + depends on GENERIC_HARDIRQS && HAS_DMA select NET_CORE select MACB ---help--- -- cgit v1.2.3 From 822bc329695ac1612c87efe68bd8f7d5cbb47be9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 May 2013 11:04:50 +0000 Subject: net/ethernet: MACB should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `macb_free_consistent': drivers/net/ethernet/cadence/macb.c:878: undefined reference to `dma_free_coherent' drivers/net/ethernet/cadence/macb.c:883: undefined reference to `dma_free_coherent' drivers/net/ethernet/cadence/macb.c:888: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `macb_alloc_consistent': drivers/net/ethernet/cadence/macb.c:905: undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `macb_tx_interrupt': drivers/net/ethernet/cadence/macb.c:515: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `macb_tx_error_task': drivers/net/ethernet/cadence/macb.c:457: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `macb_start_xmit': drivers/net/ethernet/cadence/macb.c:838: undefined reference to `dma_map_single' Signed-off-by: Geert Uytterhoeven Cc: Nicolas Ferre Cc: David S. Miller Cc: netdev@vger.kernel.org Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig index 0d9d6e64d26f..768285ec10f4 100644 --- a/drivers/net/ethernet/cadence/Kconfig +++ b/drivers/net/ethernet/cadence/Kconfig @@ -31,6 +31,7 @@ config ARM_AT91_ETHER config MACB tristate "Cadence MACB/GEM support" + depends on HAS_DMA select PHYLIB ---help--- The Cadence MACB ethernet interface is found on many Atmel AT32 and -- cgit v1.2.3 From 79e0c19e85cd1617efcf441988a206ffc96b56a1 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 May 2013 11:04:52 +0000 Subject: caif: CAIF_VIRTIO should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `cfv_destroy_genpool': drivers/net/caif/caif_virtio.c:364: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `cfv_create_genpool': drivers/net/caif/caif_virtio.c:397: undefined reference to `dma_alloc_coherent' Signed-off-by: Geert Uytterhoeven Cc: Dmitry Tarnyagin Cc: David S. Miller Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/caif/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig index 7ffc756131a2..547098086773 100644 --- a/drivers/net/caif/Kconfig +++ b/drivers/net/caif/Kconfig @@ -43,7 +43,7 @@ config CAIF_HSI config CAIF_VIRTIO tristate "CAIF virtio transport driver" - depends on CAIF + depends on CAIF && HAS_DMA select VHOST_RING select VIRTIO select GENERIC_ALLOCATOR -- cgit v1.2.3 From 4b264a1676e70dc656ba53a8cac690f2d4b65f4e Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 9 May 2013 11:14:07 +0000 Subject: 3c59x: fix PCI resource management The driver wrongly claimed I/O ports at an address returned by pci_iomap() -- even if it was passed an MMIO address. Fix this by claiming/releasing all PCI resources in the PCI driver's probe()/remove() methods instead and get rid of 'must_free_region' flag weirdness (why would Cardbus claim anything for us?). Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/3com/3c59x.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c index de570a8f8967..072c6f14e8fc 100644 --- a/drivers/net/ethernet/3com/3c59x.c +++ b/drivers/net/ethernet/3com/3c59x.c @@ -632,7 +632,6 @@ struct vortex_private { pm_state_valid:1, /* pci_dev->saved_config_space has sane contents */ open:1, medialock:1, - must_free_region:1, /* Flag: if zero, Cardbus owns the I/O region */ large_frames:1, /* accept large frames */ handling_irq:1; /* private in_irq indicator */ /* {get|set}_wol operations are already serialized by rtnl. @@ -1012,6 +1011,12 @@ static int vortex_init_one(struct pci_dev *pdev, if (rc < 0) goto out; + rc = pci_request_regions(pdev, DRV_NAME); + if (rc < 0) { + pci_disable_device(pdev); + goto out; + } + unit = vortex_cards_found; if (global_use_mmio < 0 && (unit >= MAX_UNITS || use_mmio[unit] < 0)) { @@ -1027,6 +1032,7 @@ static int vortex_init_one(struct pci_dev *pdev, if (!ioaddr) /* If mapping fails, fall-back to BAR 0... */ ioaddr = pci_iomap(pdev, 0, 0); if (!ioaddr) { + pci_release_regions(pdev); pci_disable_device(pdev); rc = -ENOMEM; goto out; @@ -1036,6 +1042,7 @@ static int vortex_init_one(struct pci_dev *pdev, ent->driver_data, unit); if (rc < 0) { pci_iounmap(pdev, ioaddr); + pci_release_regions(pdev); pci_disable_device(pdev); goto out; } @@ -1178,11 +1185,6 @@ static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq, /* PCI-only startup logic */ if (pdev) { - /* EISA resources already marked, so only PCI needs to do this here */ - /* Ignore return value, because Cardbus drivers already allocate for us */ - if (request_region(dev->base_addr, vci->io_size, print_name) != NULL) - vp->must_free_region = 1; - /* enable bus-mastering if necessary */ if (vci->flags & PCI_USES_MASTER) pci_set_master(pdev); @@ -1220,7 +1222,7 @@ static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq, &vp->rx_ring_dma); retval = -ENOMEM; if (!vp->rx_ring) - goto free_region; + goto free_device; vp->tx_ring = (struct boom_tx_desc *)(vp->rx_ring + RX_RING_SIZE); vp->tx_ring_dma = vp->rx_ring_dma + sizeof(struct boom_rx_desc) * RX_RING_SIZE; @@ -1484,9 +1486,7 @@ free_ring: + sizeof(struct boom_tx_desc) * TX_RING_SIZE, vp->rx_ring, vp->rx_ring_dma); -free_region: - if (vp->must_free_region) - release_region(dev->base_addr, vci->io_size); +free_device: free_netdev(dev); pr_err(PFX "vortex_probe1 fails. Returns %d\n", retval); out: @@ -3254,8 +3254,9 @@ static void vortex_remove_one(struct pci_dev *pdev) + sizeof(struct boom_tx_desc) * TX_RING_SIZE, vp->rx_ring, vp->rx_ring_dma); - if (vp->must_free_region) - release_region(dev->base_addr, vp->io_size); + + pci_release_regions(pdev); + free_netdev(dev); } -- cgit v1.2.3 From 23fbb5a87c56e98a7a4cfac9d6f2ac70f135c4df Mon Sep 17 00:00:00 2001 From: Petri Gynther Date: Thu, 9 May 2013 16:50:00 +0000 Subject: emac: Fix EMAC soft reset on 460EX/GT Fix EMAC soft reset on 460EX/GT to select the right PHY clock source before and after the soft reset. EMAC with PHY should use the clock from PHY during soft reset. EMAC without PHY should use the internal clock during soft reset. PPC460EX/GT Embedded Processor Advanced User's Manual section 28.10.1 Mode Register 0 (EMACx_MR0) states: Note: The PHY must provide a TX Clk in order to perform a soft reset of the EMAC. If none is present, select the internal clock (SDR0_ETH_CFG[EMACx_PHY_CLK] = 1). After a soft reset, select the external clock. Without the fix, 460EX/GT-based boards with RGMII PHYs attached to EMACs experience EMAC interrupt storm and system watchdog reset when issuing "ifconfig eth0 down" + "ifconfig eth0 up" a few times. The system enters endless loop of serving emac_irq() with EMACx_ISR register stuck at value 0x10000000 (Rx parity error). With the fix, the above issue is no longer observed. Signed-off-by: Petri Gynther Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/emac/core.c | 36 ++++++++++++++++++++++++++++-------- 1 file changed, 28 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c index 4989481c19f0..d300a0c0eafc 100644 --- a/drivers/net/ethernet/ibm/emac/core.c +++ b/drivers/net/ethernet/ibm/emac/core.c @@ -359,10 +359,26 @@ static int emac_reset(struct emac_instance *dev) } #ifdef CONFIG_PPC_DCR_NATIVE - /* Enable internal clock source */ - if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) - dcri_clrset(SDR0, SDR0_ETH_CFG, - 0, SDR0_ETH_CFG_ECS << dev->cell_index); + /* + * PPC460EX/GT Embedded Processor Advanced User's Manual + * section 28.10.1 Mode Register 0 (EMACx_MR0) states: + * Note: The PHY must provide a TX Clk in order to perform a soft reset + * of the EMAC. If none is present, select the internal clock + * (SDR0_ETH_CFG[EMACx_PHY_CLK] = 1). + * After a soft reset, select the external clock. + */ + if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) { + if (dev->phy_address == 0xffffffff && + dev->phy_map == 0xffffffff) { + /* No PHY: select internal loop clock before reset */ + dcri_clrset(SDR0, SDR0_ETH_CFG, + 0, SDR0_ETH_CFG_ECS << dev->cell_index); + } else { + /* PHY present: select external clock before reset */ + dcri_clrset(SDR0, SDR0_ETH_CFG, + SDR0_ETH_CFG_ECS << dev->cell_index, 0); + } + } #endif out_be32(&p->mr0, EMAC_MR0_SRST); @@ -370,10 +386,14 @@ static int emac_reset(struct emac_instance *dev) --n; #ifdef CONFIG_PPC_DCR_NATIVE - /* Enable external clock source */ - if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) - dcri_clrset(SDR0, SDR0_ETH_CFG, - SDR0_ETH_CFG_ECS << dev->cell_index, 0); + if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) { + if (dev->phy_address == 0xffffffff && + dev->phy_map == 0xffffffff) { + /* No PHY: restore external clock source after reset */ + dcri_clrset(SDR0, SDR0_ETH_CFG, + SDR0_ETH_CFG_ECS << dev->cell_index, 0); + } + } #endif if (n) { -- cgit v1.2.3 From d34710e3e30fee26f4b0617b5458aa1c48236bb0 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Thu, 9 May 2013 19:50:51 +0000 Subject: virtio_net: use default napi weight by default Since commit 82dc3c63c692b1e1d5937 ("net: introduce NAPI_POLL_WEIGHT") we warn drivers when they use napi weight higher than NAPI_POLL_WEIGHT, but virtio_net still uses 128 by default. This patch makes its default value to NAPI_POLL_WEIGHT. Cc: "Michael S. Tsirkin" Cc: Eric Dumazet Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 3c23fdc27bf0..655bb25eed2b 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -28,7 +28,7 @@ #include #include -static int napi_weight = 128; +static int napi_weight = NAPI_POLL_WEIGHT; module_param(napi_weight, int, 0444); static bool csum = true, gso = true; -- cgit v1.2.3 From 5dbd5068430b8bd1c19387d46d6c1a88b261257f Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Thu, 9 May 2013 21:56:37 +0000 Subject: ipv6,gre: do not leak info to user-space There is a hole in struct ip6_tnl_parm2, so we have to zero the struct on stack before copying it to user-space. Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/ipv6/ip6_gre.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index d3ddd8400354..ecd60733e5e2 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -1081,6 +1081,7 @@ static int ip6gre_tunnel_ioctl(struct net_device *dev, } if (t == NULL) t = netdev_priv(dev); + memset(&p, 0, sizeof(p)); ip6gre_tnl_parm_to_user(&p, &t->parms); if (copy_to_user(ifr->ifr_ifru.ifru_data, &p, sizeof(p))) err = -EFAULT; @@ -1128,6 +1129,7 @@ static int ip6gre_tunnel_ioctl(struct net_device *dev, if (t) { err = 0; + memset(&p, 0, sizeof(p)); ip6gre_tnl_parm_to_user(&p, &t->parms); if (copy_to_user(ifr->ifr_ifru.ifru_data, &p, sizeof(p))) err = -EFAULT; -- cgit v1.2.3 From 84c4a9dfbf430861e7588d95ae3ff61535dca351 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Thu, 9 May 2013 22:40:00 +0000 Subject: xfrm6: release dev before returning error We forget to call dev_put() on error path in xfrm6_fill_dst(), its caller doesn't handle this. Cc: Herbert Xu Cc: Steffen Klassert Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/ipv6/xfrm6_policy.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c index 4ef7bdb65440..23ed03d786c8 100644 --- a/net/ipv6/xfrm6_policy.c +++ b/net/ipv6/xfrm6_policy.c @@ -103,8 +103,10 @@ static int xfrm6_fill_dst(struct xfrm_dst *xdst, struct net_device *dev, dev_hold(dev); xdst->u.rt6.rt6i_idev = in6_dev_get(dev); - if (!xdst->u.rt6.rt6i_idev) + if (!xdst->u.rt6.rt6i_idev) { + dev_put(dev); return -ENODEV; + } rt6_transfer_peer(&xdst->u.rt6, rt); -- cgit v1.2.3 From 4510d198f994bf49f88aa05d55e7a3584cd430a8 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 23 Apr 2013 17:06:43 +0000 Subject: hwmon: (iio_hwmon) Fix missing iio_channel_release_all call if devm_kzalloc fail Signed-off-by: Axel Lin Acked-by: Jonathan Cameron Signed-off-by: Guenter Roeck --- drivers/hwmon/iio_hwmon.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/iio_hwmon.c b/drivers/hwmon/iio_hwmon.c index aafa4531b961..368497fa2627 100644 --- a/drivers/hwmon/iio_hwmon.c +++ b/drivers/hwmon/iio_hwmon.c @@ -84,8 +84,10 @@ static int iio_hwmon_probe(struct platform_device *pdev) return PTR_ERR(channels); st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL); - if (st == NULL) - return -ENOMEM; + if (st == NULL) { + ret = -ENOMEM; + goto error_release_channels; + } st->channels = channels; -- cgit v1.2.3 From 169c05cd54473ba4cc37bf4d22e7631395d14f68 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 9 May 2013 10:40:01 -0700 Subject: hwmon: (nct6775) Do not create non-existing attributes Overtemperature and hysteresis registers only exist for primary temperature registers, not for alternates, so do not assign those registers when initializing alternates. Signed-off-by: Guenter Roeck --- drivers/hwmon/nct6775.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c index f43f5e571db9..04638aee9039 100644 --- a/drivers/hwmon/nct6775.c +++ b/drivers/hwmon/nct6775.c @@ -3705,8 +3705,10 @@ static int nct6775_probe(struct platform_device *pdev) data->have_temp |= 1 << i; data->have_temp_fixed |= 1 << i; data->reg_temp[0][i] = reg_temp_alternate[i]; - data->reg_temp[1][i] = reg_temp_over[i]; - data->reg_temp[2][i] = reg_temp_hyst[i]; + if (i < num_reg_temp) { + data->reg_temp[1][i] = reg_temp_over[i]; + data->reg_temp[2][i] = reg_temp_hyst[i]; + } data->temp_src[i] = i + 1; continue; } -- cgit v1.2.3 From 4b0c0f294f60abcdd20994a8341a95c8ac5eeb96 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 3 May 2013 15:02:50 +0200 Subject: tick: Cleanup NOHZ per cpu data on cpu down Prarit reported a crash on CPU offline/online. The reason is that on CPU down the NOHZ related per cpu data of the dead cpu is not cleaned up. If at cpu online an interrupt happens before the per cpu tick device is registered the irq_enter() check potentially sees stale data and dereferences a NULL pointer. Cleanup the data after the cpu is dead. Reported-by: Prarit Bhargava Cc: stable@vger.kernel.org Cc: Mike Galbraith Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305031451561.2886@ionos Signed-off-by: Thomas Gleixner --- kernel/time/tick-sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 225f8bf19095..0eed1db2d792 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -904,7 +904,7 @@ void tick_cancel_sched_timer(int cpu) hrtimer_cancel(&ts->sched_timer); # endif - ts->nohz_mode = NOHZ_MODE_INACTIVE; + memset(ts, 0, sizeof(*ts)); } #endif -- cgit v1.2.3 From 0a3b15ac3cc3ddc791901e12bdc930b5fa11a30a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 2 May 2013 21:54:37 +0200 Subject: ACPI / PM: Move processor suspend/resume to syscore_ops The system suspend routine of the ACPI processor driver saves the BUS_MASTER_RLD register and its resume routine restores it. However, there can be only one such register in the system and it really should be saved after non-boot CPUs have been offlined and restored before they are put back online during resume. For this reason, move the saving and restoration of BUS_MASTER_RLD to syscore suspend and syscore resume, respectively, and drop the no longer necessary suspend/resume callbacks from the ACPI processor driver. Signed-off-by: Rafael J. Wysocki --- drivers/acpi/processor_driver.c | 8 ++++---- drivers/acpi/processor_idle.c | 29 +++++++++++++++++++---------- include/acpi/processor.h | 10 ++++++++-- 3 files changed, 31 insertions(+), 16 deletions(-) diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index bec717ffd25f..c266cdc11784 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -95,9 +95,6 @@ static const struct acpi_device_id processor_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, processor_device_ids); -static SIMPLE_DEV_PM_OPS(acpi_processor_pm, - acpi_processor_suspend, acpi_processor_resume); - static struct acpi_driver acpi_processor_driver = { .name = "processor", .class = ACPI_PROCESSOR_CLASS, @@ -107,7 +104,6 @@ static struct acpi_driver acpi_processor_driver = { .remove = acpi_processor_remove, .notify = acpi_processor_notify, }, - .drv.pm = &acpi_processor_pm, }; #define INSTALL_NOTIFY_HANDLER 1 @@ -934,6 +930,8 @@ static int __init acpi_processor_init(void) if (result < 0) return result; + acpi_processor_syscore_init(); + acpi_processor_install_hotplug_notify(); acpi_thermal_cpufreq_init(); @@ -956,6 +954,8 @@ static void __exit acpi_processor_exit(void) acpi_processor_uninstall_hotplug_notify(); + acpi_processor_syscore_exit(); + acpi_bus_unregister_driver(&acpi_processor_driver); return; diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index f0df2c9434d2..eb133c77aadb 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -34,6 +34,7 @@ #include /* need_resched() */ #include #include +#include /* * Include the apic definitions for x86 to have the APIC timer related defines @@ -210,33 +211,41 @@ static void lapic_timer_state_broadcast(struct acpi_processor *pr, #endif +#ifdef CONFIG_PM_SLEEP static u32 saved_bm_rld; -static void acpi_idle_bm_rld_save(void) +int acpi_processor_suspend(void) { acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld); + return 0; } -static void acpi_idle_bm_rld_restore(void) + +void acpi_processor_resume(void) { u32 resumed_bm_rld; acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld); + if (resumed_bm_rld == saved_bm_rld) + return; - if (resumed_bm_rld != saved_bm_rld) - acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld); + acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld); } -int acpi_processor_suspend(struct device *dev) +static struct syscore_ops acpi_processor_syscore_ops = { + .suspend = acpi_processor_suspend, + .resume = acpi_processor_resume, +}; + +void acpi_processor_syscore_init(void) { - acpi_idle_bm_rld_save(); - return 0; + register_syscore_ops(&acpi_processor_syscore_ops); } -int acpi_processor_resume(struct device *dev) +void acpi_processor_syscore_exit(void) { - acpi_idle_bm_rld_restore(); - return 0; + unregister_syscore_ops(&acpi_processor_syscore_ops); } +#endif /* CONFIG_PM_SLEEP */ #if defined(CONFIG_X86) static void tsc_check_state(int state) diff --git a/include/acpi/processor.h b/include/acpi/processor.h index b327b5a9296d..ea69367fdd3b 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -329,10 +329,16 @@ int acpi_processor_power_init(struct acpi_processor *pr); int acpi_processor_power_exit(struct acpi_processor *pr); int acpi_processor_cst_has_changed(struct acpi_processor *pr); int acpi_processor_hotplug(struct acpi_processor *pr); -int acpi_processor_suspend(struct device *dev); -int acpi_processor_resume(struct device *dev); extern struct cpuidle_driver acpi_idle_driver; +#ifdef CONFIG_PM_SLEEP +void acpi_processor_syscore_init(void); +void acpi_processor_syscore_exit(void); +#else +static inline void acpi_processor_syscore_init(void) {} +static inline void acpi_processor_syscore_exit(void) {} +#endif + /* in processor_thermal.c */ int acpi_processor_get_limit_info(struct acpi_processor *pr); extern const struct thermal_cooling_device_ops processor_cooling_ops; -- cgit v1.2.3 From 36200af867e2cf5adc1ff77214b2524f6111736f Mon Sep 17 00:00:00 2001 From: Jan-Simon Möller Date: Tue, 30 Apr 2013 09:39:04 +0000 Subject: ACPI: Fix section to __init. Align with usage in acpixf.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes warning during compilation with clang. [rjw: Subject and changelog] Signed-off-by: Jan-Simon Möller Signed-off-by: Rafael J. Wysocki --- include/acpi/acpiosxf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index 5b3d2bd4813a..64b8c7639520 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -77,7 +77,7 @@ struct acpi_signal_fatal_info { /* * OSL Initialization and shutdown primitives */ -acpi_status __initdata acpi_os_initialize(void); +acpi_status __init acpi_os_initialize(void); acpi_status acpi_os_terminate(void); -- cgit v1.2.3 From 4ef366c583d6180b1c951147869ee5a3038834f2 Mon Sep 17 00:00:00 2001 From: Alex Hung Date: Mon, 6 May 2013 08:23:43 +0000 Subject: ACPI video: ignore BIOS initial backlight value for HP 1000 On HP 1000 lapops, BIOS reports minimum backlight on boot and causes backlight to dim completely. This ignores the initial backlight values and set to max brightness. References:: https://bugs.launchpad.net/bugs/1167760 Signed-off-by: Alex Hung Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index c3932d0876e0..5b32e15a65ce 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -456,6 +456,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dm4 Notebook PC"), }, }, + { + .callback = video_ignore_initial_backlight, + .ident = "HP 1000 Notebook PC", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP 1000 Notebook PC"), + }, + }, {} }; -- cgit v1.2.3 From 28fe5c825f8e15744d04c7c1b8df197950923ecd Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Mon, 6 May 2013 03:23:40 +0000 Subject: ACPI / EC: Restart transaction even when the IBF flag set The EC driver works abnormally with IBF flag always set. IBF means "The host has written a byte of data to the command or data port, but the embedded controller has not yet read it". If IBF is set in the EC status and not cleared, this will cause all subsequent EC requests to fail with a timeout error. Change the EC driver so that it doesn't refuse to restart a transaction if IBF is set in the status. Also increase the number of transaction restarts to 5, as it turns out that 2 is not sufficient in some cases. This bug happens on several different machines (Asus V1S, Dell Latitude E6530, Samsung R719, Acer Aspire 5930G, Sony Vaio SR19VN and others). [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=14733 References: https://bugzilla.kernel.org/show_bug.cgi?id=15560 References: https://bugzilla.kernel.org/show_bug.cgi?id=15946 References: https://bugzilla.kernel.org/show_bug.cgi?id=42945 References: https://bugzilla.kernel.org/show_bug.cgi?id=48221 Signed-off-by: Lan Tianyu Cc: All Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index d45b2871d33b..edc00818c803 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -223,7 +223,7 @@ static int ec_check_sci_sync(struct acpi_ec *ec, u8 state) static int ec_poll(struct acpi_ec *ec) { unsigned long flags; - int repeat = 2; /* number of command restarts */ + int repeat = 5; /* number of command restarts */ while (repeat--) { unsigned long delay = jiffies + msecs_to_jiffies(ec_delay); @@ -241,8 +241,6 @@ static int ec_poll(struct acpi_ec *ec) } advance_transaction(ec, acpi_ec_read_status(ec)); } while (time_before(jiffies, delay)); - if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) - break; pr_debug(PREFIX "controller reset, restart transaction\n"); spin_lock_irqsave(&ec->lock, flags); start_transaction(ec); -- cgit v1.2.3 From 0ab5bb64937d76c660c29813d8de0f4b47bf7550 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Wed, 8 May 2013 07:28:46 +0000 Subject: ACPI / AC: Add sleep quirk for Thinkpad e530 The Thinkpad e530's BIOS notifies the AC device first and then sleeps for certain amount of time before doing real work in the EC event handler (_Qxx): Method (_Q27, 0, NotSerialized) { Notify (AC, 0x80) Sleep (0x03E8) Store (Zero, PWRS) PNOT () } This causes the AC driver to report an outdated AC state to user space, because it reads the state information from the device while the EC handler is sleeping. Introduce a quirk to cause the AC driver to wait in acpi_ac_notify() before calling acpi_ac_get_state() on systems known to have this problem and add Thinkpad e530 to the list of quirky machines (with a 1s delay which has been verified to be sufficient for that machine). [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=45221 Signed-off-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ac.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index 00d2efd674df..4f4e741d34b2 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -28,6 +28,8 @@ #include #include #include +#include +#include #ifdef CONFIG_ACPI_PROCFS_POWER #include #include @@ -74,6 +76,8 @@ static int acpi_ac_resume(struct device *dev); #endif static SIMPLE_DEV_PM_OPS(acpi_ac_pm, NULL, acpi_ac_resume); +static int ac_sleep_before_get_state_ms; + static struct acpi_driver acpi_ac_driver = { .name = "ac", .class = ACPI_AC_CLASS, @@ -252,6 +256,16 @@ static void acpi_ac_notify(struct acpi_device *device, u32 event) case ACPI_AC_NOTIFY_STATUS: case ACPI_NOTIFY_BUS_CHECK: case ACPI_NOTIFY_DEVICE_CHECK: + /* + * A buggy BIOS may notify AC first and then sleep for + * a specific time before doing actual operations in the + * EC event handler (_Qxx). This will cause the AC state + * reported by the ACPI event to be incorrect, so wait for a + * specific time for the EC event handler to make progress. + */ + if (ac_sleep_before_get_state_ms > 0) + msleep(ac_sleep_before_get_state_ms); + acpi_ac_get_state(ac); acpi_bus_generate_proc_event(device, event, (u32) ac->state); acpi_bus_generate_netlink_event(device->pnp.device_class, @@ -264,6 +278,24 @@ static void acpi_ac_notify(struct acpi_device *device, u32 event) return; } +static int thinkpad_e530_quirk(const struct dmi_system_id *d) +{ + ac_sleep_before_get_state_ms = 1000; + return 0; +} + +static struct dmi_system_id ac_dmi_table[] = { + { + .callback = thinkpad_e530_quirk, + .ident = "thinkpad e530", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "32597CG"), + }, + }, + {}, +}; + static int acpi_ac_add(struct acpi_device *device) { int result = 0; @@ -312,6 +344,7 @@ static int acpi_ac_add(struct acpi_device *device) kfree(ac); } + dmi_check_system(ac_dmi_table); return result; } -- cgit v1.2.3 From bb08be78721bed02b147448d2cb404babc369cfe Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 29 Apr 2013 13:24:44 +0000 Subject: cpufreq: ARM big LITTLE: Select PM_OPP The ARM big LITTLE cpufreq driver uses the OPP layer for its functionality. Select it in Kconfig. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/Kconfig.arm | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index f3af18b9acc5..a78ce4490c61 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -5,6 +5,7 @@ config ARM_BIG_LITTLE_CPUFREQ tristate depends on ARM_CPU_TOPOLOGY + select PM_OPP config ARM_DT_BL_CPUFREQ tristate "Generic ARM big LITTLE CPUfreq driver probed via DT" -- cgit v1.2.3 From 996905f3334506296c8a4bec63695bcf7a9df159 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 29 Apr 2013 13:24:45 +0000 Subject: cpufreq: ARM big LITTLE DT: Return correct transition latency By mistake we are returning zero for successful call to dt_get_transition_latency(), whereas we should return transition_latency. Fix that. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/arm_big_little_dt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c index 44be3115375c..d5ae4d2362e3 100644 --- a/drivers/cpufreq/arm_big_little_dt.c +++ b/drivers/cpufreq/arm_big_little_dt.c @@ -78,7 +78,7 @@ static int dt_get_transition_latency(struct device *cpu_dev) of_node_put(np); of_node_put(parent); - return 0; + return transition_latency; } return -ENODEV; -- cgit v1.2.3 From 3c792e0fe17858105b72516f709c48fc8e4a7523 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 29 Apr 2013 13:24:46 +0000 Subject: cpufreq: ARM big LITTLE DT: Return CPUFREQ_ETERNAL if clock-latency isn't found If "/cpus" node isn't present or "clock-latency" isn't defined we are returning error currently. Let's return CPUFREQ_ETERNAL instead, so that we don't fail. Flag appropriate messages to user in such cases. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/arm_big_little_dt.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c index d5ae4d2362e3..173ed059d95f 100644 --- a/drivers/cpufreq/arm_big_little_dt.c +++ b/drivers/cpufreq/arm_big_little_dt.c @@ -66,8 +66,8 @@ static int dt_get_transition_latency(struct device *cpu_dev) parent = of_find_node_by_path("/cpus"); if (!parent) { - pr_err("failed to find OF /cpus\n"); - return -ENOENT; + pr_info("Failed to find OF /cpus. Use CPUFREQ_ETERNAL transition latency\n"); + return CPUFREQ_ETERNAL; } for_each_child_of_node(parent, np) { @@ -81,7 +81,8 @@ static int dt_get_transition_latency(struct device *cpu_dev) return transition_latency; } - return -ENODEV; + pr_info("clock-latency isn't found, use CPUFREQ_ETERNAL transition latency\n"); + return CPUFREQ_ETERNAL; } static struct cpufreq_arm_bL_ops dt_bL_ops = { -- cgit v1.2.3 From 4521adf85cd18e4652b9285846835f74418bd88f Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 29 Apr 2013 13:24:47 +0000 Subject: cpufreq: ARM big LITTLE: Move cpu_to_cluster() to arm_big_little.h The cpu_to_cluster() function may be used by glue drivers, so it's better to keep it in arm_big_little.h. [rjw: Changelog] Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/arm_big_little.c | 5 ----- drivers/cpufreq/arm_big_little.h | 5 +++++ 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c index dbdf677d2f36..fd7beed801f8 100644 --- a/drivers/cpufreq/arm_big_little.c +++ b/drivers/cpufreq/arm_big_little.c @@ -40,11 +40,6 @@ static struct clk *clk[MAX_CLUSTERS]; static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS]; static atomic_t cluster_usage[MAX_CLUSTERS] = {ATOMIC_INIT(0), ATOMIC_INIT(0)}; -static int cpu_to_cluster(int cpu) -{ - return topology_physical_package_id(cpu); -} - static unsigned int bL_cpufreq_get(unsigned int cpu) { u32 cur_cluster = cpu_to_cluster(cpu); diff --git a/drivers/cpufreq/arm_big_little.h b/drivers/cpufreq/arm_big_little.h index 70f18fc12d4a..79b2ce17884d 100644 --- a/drivers/cpufreq/arm_big_little.h +++ b/drivers/cpufreq/arm_big_little.h @@ -34,6 +34,11 @@ struct cpufreq_arm_bL_ops { int (*init_opp_table)(struct device *cpu_dev); }; +static inline int cpu_to_cluster(int cpu) +{ + return topology_physical_package_id(cpu); +} + int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops); void bL_cpufreq_unregister(struct cpufreq_arm_bL_ops *ops); -- cgit v1.2.3 From 2b80f3138e8470194745a6b954b4905060ab4067 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 29 Apr 2013 13:24:48 +0000 Subject: cpufreq: ARM big LITTLE: Improve print message The message printed at the end of driver->init() doesn't include the "cpufreq" string at all and so is difficult to find in dmesg. Add function name to that message to clearly state where the message is coming from. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/arm_big_little.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c index fd7beed801f8..5d7f53fcd6f5 100644 --- a/drivers/cpufreq/arm_big_little.c +++ b/drivers/cpufreq/arm_big_little.c @@ -187,7 +187,7 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy) cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu)); - dev_info(cpu_dev, "CPU %d initialized\n", policy->cpu); + dev_info(cpu_dev, "%s: CPU %d initialized\n", __func__, policy->cpu); return 0; } -- cgit v1.2.3 From a97c98adddbe98e824b69e6d7b320c8dc91fe581 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 30 Apr 2013 14:32:17 +0000 Subject: cpufreq: governors: Fix CPUFREQ_GOV_POLICY_{INIT|EXIT} notifiers There are two types of INIT/EXIT activities that we need to do for governors: - Done only once per governor (doesn't depend how many instances of the governor there are). eg: cpufreq_register_notifier() for conservative governor. - Done per governor instance, eg: sysfs_{create|remove}_group(). There were some corner cases where current code isn't able to handle them separately and so failing for some test cases. We use two separate variables now for keeping track of above two requirements. - governor->initialized for first one - dbs_data->usage_count for per governor instance Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq_governor.c | 11 +++++++---- drivers/cpufreq/cpufreq_governor.h | 1 + 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c index 443442df113b..5af40ad82d23 100644 --- a/drivers/cpufreq/cpufreq_governor.c +++ b/drivers/cpufreq/cpufreq_governor.c @@ -255,6 +255,7 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy, if (have_governor_per_policy()) { WARN_ON(dbs_data); } else if (dbs_data) { + dbs_data->usage_count++; policy->governor_data = dbs_data; return 0; } @@ -266,6 +267,7 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy, } dbs_data->cdata = cdata; + dbs_data->usage_count = 1; rc = cdata->init(dbs_data); if (rc) { pr_err("%s: POLICY_INIT: init() failed\n", __func__); @@ -294,7 +296,8 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy, set_sampling_rate(dbs_data, max(dbs_data->min_sampling_rate, latency * LATENCY_MULTIPLIER)); - if (dbs_data->cdata->governor == GOV_CONSERVATIVE) { + if ((cdata->governor == GOV_CONSERVATIVE) && + (!policy->governor->initialized)) { struct cs_ops *cs_ops = dbs_data->cdata->gov_ops; cpufreq_register_notifier(cs_ops->notifier_block, @@ -306,12 +309,12 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy, return 0; case CPUFREQ_GOV_POLICY_EXIT: - if ((policy->governor->initialized == 1) || - have_governor_per_policy()) { + if (!--dbs_data->usage_count) { sysfs_remove_group(get_governor_parent_kobj(policy), get_sysfs_attr(dbs_data)); - if (dbs_data->cdata->governor == GOV_CONSERVATIVE) { + if ((dbs_data->cdata->governor == GOV_CONSERVATIVE) && + (policy->governor->initialized == 1)) { struct cs_ops *cs_ops = dbs_data->cdata->gov_ops; cpufreq_unregister_notifier(cs_ops->notifier_block, diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h index 8ac33538d0bd..e16a96130cb3 100644 --- a/drivers/cpufreq/cpufreq_governor.h +++ b/drivers/cpufreq/cpufreq_governor.h @@ -211,6 +211,7 @@ struct common_dbs_data { struct dbs_data { struct common_dbs_data *cdata; unsigned int min_sampling_rate; + int usage_count; void *tuners; /* dbs_mutex protects dbs_enable in governor start/stop */ -- cgit v1.2.3 From d96038e0fa00f42a5d6711884bef0a725cdc70bb Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 30 Apr 2013 14:32:18 +0000 Subject: cpufreq: Issue CPUFREQ_GOV_POLICY_EXIT notifier before dropping policy refcount We must call __cpufreq_governor(data, CPUFREQ_GOV_POLICY_EXIT) before calling cpufreq_cpu_put(data), so that policy kobject have valid fields. Otherwise, removing last online cpu of policy->cpus causes this crash for ondemand/conservative governor. [] (sysfs_find_dirent+0xe/0xa8) from [] (sysfs_get_dirent+0x21/0x58) [] (sysfs_get_dirent+0x21/0x58) from [] (sysfs_remove_group+0x85/0xbc) [] (sysfs_remove_group+0x85/0xbc) from [] (cpufreq_governor_dbs+0x369/0x4a0) [] (cpufreq_governor_dbs+0x369/0x4a0) from [] (__cpufreq_governor+0x2b/0x8c) [] (__cpufreq_governor+0x2b/0x8c) from [] (__cpufreq_remove_dev.isra.12+0x15b/0x250) [] (__cpufreq_remove_dev.isra.12+0x15b/0x250) from [] (cpufreq_cpu_callback+0x2f/0x3c) [] (cpufreq_cpu_callback+0x2f/0x3c) from [] (notifier_call_chain+0x45/0x54) [] (notifier_call_chain+0x45/0x54) from [] (__cpu_notify+0x1d/0x34) [] (__cpu_notify+0x1d/0x34) from [] (_cpu_down+0x63/0x1ac) [] (_cpu_down+0x63/0x1ac) from [] (cpu_down+0x1b/0x30) [] (cpu_down+0x1b/0x30) from [] (store_online+0x27/0x54) [] (store_online+0x27/0x54) from [] (dev_attr_store+0x11/0x18) [] (dev_attr_store+0x11/0x18) from [] (sysfs_write_file+0xed/0x114) [] (sysfs_write_file+0xed/0x114) from [] (vfs_write+0x65/0xd8) [] (vfs_write+0x65/0xd8) from [] (sys_write+0x2f/0x50) [] (sys_write+0x2f/0x50) from [] (ret_fast_syscall+0x1/0x52) Of course this only impacted drivers which have have_governor_per_policy set to true. i.e. big LITTLE cpufreq driver. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 1b8a48eaf90f..b7acfd153bf9 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1075,14 +1075,14 @@ static int __cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif __func__, cpu_dev->id, cpu); } + if ((cpus == 1) && (cpufreq_driver->target)) + __cpufreq_governor(data, CPUFREQ_GOV_POLICY_EXIT); + pr_debug("%s: removing link, cpu: %d\n", __func__, cpu); cpufreq_cpu_put(data); /* If cpu is last user of policy, free policy */ if (cpus == 1) { - if (cpufreq_driver->target) - __cpufreq_governor(data, CPUFREQ_GOV_POLICY_EXIT); - lock_policy_rwsem_read(cpu); kobj = &data->kobj; cmp = &data->kobj_unregister; -- cgit v1.2.3 From fc31d6f55908759530462998d0464a9f124b1c32 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Wed, 1 May 2013 13:38:12 +0000 Subject: cpufreq: cpufreq-cpu0: defer probe when regulator is not ready With commit 1e4b545, regulator_get will now return -EPROBE_DEFER when the cpu0-supply node is present, but the regulator is not yet registered. It is possible for this to occur when the regulator registration by itself might be defered due to some dependent interface not yet instantiated. For example: an regulator which uses I2C and GPIO might need both systems available before proceeding, in this case, the regulator might defer it's registration. However, the cpufreq-cpu0 driver assumes that any un-successful return result is equivalent of failure. When the regulator_get returns failure other than -EPROBE_DEFER, it makes sense to assume that supply node is not present and proceed with the assumption that only clock control is necessary in the platform. With this change, we can now handle the following conditions: a) cpu0-supply binding is not present, regulator_get will return appropriate error result, resulting in cpufreq-cpu0 driver controlling just the clock. b) cpu0-supply binding is present, regulator_get returns -EPROBE_DEFER, we retry resulting in cpufreq-cpu0 driver registering later once the regulator is available. c) cpu0-supply binding is present, regulator_get returns -EPROBE_DEFER, however, regulator never registers, we retry until cpufreq-cpu0 driver fails to register pointing at device tree information bug. However, in this case, the fact that cpufreq-cpu0 operates with clock only when the DT binding clearly indicates need of a supply is a bug of it's own. d) cpu0-supply gets an regulator at probe - cpufreq-cpu0 driver controls both the clock and regulator Signed-off-by: Nishanth Menon Acked-by: Shawn Guo Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq-cpu0.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index 3ab8294eab04..ecd8af900432 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -195,6 +195,22 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) cpu_dev = &pdev->dev; cpu_dev->of_node = np; + cpu_reg = devm_regulator_get(cpu_dev, "cpu0"); + if (IS_ERR(cpu_reg)) { + /* + * If cpu0 regulator supply node is present, but regulator is + * not yet registered, we should try defering probe. + */ + if (PTR_ERR(cpu_reg) == -EPROBE_DEFER) { + dev_err(cpu_dev, "cpu0 regulator not ready, retry\n"); + ret = -EPROBE_DEFER; + goto out_put_node; + } + pr_warn("failed to get cpu0 regulator: %ld\n", + PTR_ERR(cpu_reg)); + cpu_reg = NULL; + } + cpu_clk = devm_clk_get(cpu_dev, NULL); if (IS_ERR(cpu_clk)) { ret = PTR_ERR(cpu_clk); @@ -202,12 +218,6 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) goto out_put_node; } - cpu_reg = devm_regulator_get(cpu_dev, "cpu0"); - if (IS_ERR(cpu_reg)) { - pr_warn("failed to get cpu0 regulator\n"); - cpu_reg = NULL; - } - ret = of_init_opp_table(cpu_dev); if (ret) { pr_err("failed to init OPP table: %d\n", ret); -- cgit v1.2.3 From 5aaa9cc7ab589893efe8e66bf02f7fc2175a1f5b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 3 May 2013 04:44:25 +0000 Subject: cpufreq: cpufreq-cpu0: Free parent node for error cases We are freeing parent node in success cases but not in failure cases. Let's do it. Signed-off-by: Viresh Kumar Acked-by: Shawn Guo Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq-cpu0.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index ecd8af900432..a64eb8b70444 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -189,7 +189,8 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) if (!np) { pr_err("failed to find cpu0 node\n"); - return -ENOENT; + ret = -ENOENT; + goto out_put_parent; } cpu_dev = &pdev->dev; @@ -274,6 +275,8 @@ out_free_table: opp_free_cpufreq_table(cpu_dev, &freq_table); out_put_node: of_node_put(np); +out_put_parent: + of_node_put(parent); return ret; } -- cgit v1.2.3 From 99af771115f7b2f86548ca2f762adb9032096702 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Sat, 4 May 2013 12:03:54 +0530 Subject: cpufreq: ARM big LITTLE: Fix Kconfig entries This fixes usage of "depends on" and "select" options in Kconfig for ARM big LITTLE cpufreq driver. Otherwise we get these warnings: warning: (ARM_DT_BL_CPUFREQ) selects ARM_BIG_LITTLE_CPUFREQ which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && ARM && ARM_CPU_TOPOLOGY) Signed-off-by: Arnd Bergmann Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/Kconfig.arm | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index a78ce4490c61..6e57543fe0b9 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -3,17 +3,17 @@ # config ARM_BIG_LITTLE_CPUFREQ - tristate - depends on ARM_CPU_TOPOLOGY - select PM_OPP + tristate "Generic ARM big LITTLE CPUfreq driver" + depends on ARM_CPU_TOPOLOGY && PM_OPP && HAVE_CLK + help + This enables the Generic CPUfreq driver for ARM big.LITTLE platforms. config ARM_DT_BL_CPUFREQ - tristate "Generic ARM big LITTLE CPUfreq driver probed via DT" - select ARM_BIG_LITTLE_CPUFREQ - depends on OF && HAVE_CLK + tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver" + depends on ARM_BIG_LITTLE_CPUFREQ && OF help - This enables the Generic CPUfreq driver for ARM big.LITTLE platform. - This gets frequency tables from DT. + This enables probing via DT for Generic CPUfreq driver for ARM + big.LITTLE platform. This gets frequency tables from DT. config ARM_EXYNOS_CPUFREQ bool "SAMSUNG EXYNOS SoCs" -- cgit v1.2.3 From 559f56c70fc90bd9da8c9c9c36d86c5e582ac5b3 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sun, 5 May 2013 12:18:08 +0000 Subject: cpufreq: Fix incorrect dependecies for ARM SA11xx drivers Kconfig dependecies for ARM SA11xx drivers are incorrect, so fix them. [rjw: Changelog] Signed-off-by: Alexander Shiyan Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index a1488f58f6ca..534fcb825153 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -47,7 +47,7 @@ config CPU_FREQ_STAT_DETAILS choice prompt "Default CPUFreq governor" - default CPU_FREQ_DEFAULT_GOV_USERSPACE if CPU_FREQ_SA1100 || CPU_FREQ_SA1110 + default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1100_CPUFREQ || ARM_SA1110_CPUFREQ default CPU_FREQ_DEFAULT_GOV_PERFORMANCE help This option sets which CPUFreq governor shall be loaded at -- cgit v1.2.3 From 1abc4b20b85b42e8573957e54b193385cf48b0d6 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Tue, 7 May 2013 08:20:25 -0700 Subject: cpufreq / intel_pstate: remove idle time and duration from sample and calculations Idle time is taken into account in the APERF/MPERF ratio calculation there is no reason for the driver to track it seperately. This reduces the work in the driver and makes the code more readable. Removal of the tracking of sample duration removes the possibility of the divide by zero exception when the duration is sub 1us References: https://bugzilla.kernel.org/show_bug.cgi?id=56691 Reported-by: Mike Lothian Cc: 3.9+ Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 45 ++++++++---------------------------------- 1 file changed, 8 insertions(+), 37 deletions(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index cc3a8e6c92be..c6e10d02b795 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -48,12 +48,7 @@ static inline int32_t div_fp(int32_t x, int32_t y) } struct sample { - ktime_t start_time; - ktime_t end_time; int core_pct_busy; - int pstate_pct_busy; - u64 duration_us; - u64 idletime_us; u64 aperf; u64 mperf; int freq; @@ -91,8 +86,6 @@ struct cpudata { int min_pstate_count; int idle_mode; - ktime_t prev_sample; - u64 prev_idle_time_us; u64 prev_aperf; u64 prev_mperf; int sample_ptr; @@ -450,48 +443,26 @@ static inline void intel_pstate_calc_busy(struct cpudata *cpu, struct sample *sample) { u64 core_pct; - sample->pstate_pct_busy = 100 - div64_u64( - sample->idletime_us * 100, - sample->duration_us); core_pct = div64_u64(sample->aperf * 100, sample->mperf); sample->freq = cpu->pstate.max_pstate * core_pct * 1000; - sample->core_pct_busy = div_s64((sample->pstate_pct_busy * core_pct), - 100); + sample->core_pct_busy = core_pct; } static inline void intel_pstate_sample(struct cpudata *cpu) { - ktime_t now; - u64 idle_time_us; u64 aperf, mperf; - now = ktime_get(); - idle_time_us = get_cpu_idle_time_us(cpu->cpu, NULL); - rdmsrl(MSR_IA32_APERF, aperf); rdmsrl(MSR_IA32_MPERF, mperf); - /* for the first sample, don't actually record a sample, just - * set the baseline */ - if (cpu->prev_idle_time_us > 0) { - cpu->sample_ptr = (cpu->sample_ptr + 1) % SAMPLE_COUNT; - cpu->samples[cpu->sample_ptr].start_time = cpu->prev_sample; - cpu->samples[cpu->sample_ptr].end_time = now; - cpu->samples[cpu->sample_ptr].duration_us = - ktime_us_delta(now, cpu->prev_sample); - cpu->samples[cpu->sample_ptr].idletime_us = - idle_time_us - cpu->prev_idle_time_us; - - cpu->samples[cpu->sample_ptr].aperf = aperf; - cpu->samples[cpu->sample_ptr].mperf = mperf; - cpu->samples[cpu->sample_ptr].aperf -= cpu->prev_aperf; - cpu->samples[cpu->sample_ptr].mperf -= cpu->prev_mperf; - - intel_pstate_calc_busy(cpu, &cpu->samples[cpu->sample_ptr]); - } + cpu->sample_ptr = (cpu->sample_ptr + 1) % SAMPLE_COUNT; + cpu->samples[cpu->sample_ptr].aperf = aperf; + cpu->samples[cpu->sample_ptr].mperf = mperf; + cpu->samples[cpu->sample_ptr].aperf -= cpu->prev_aperf; + cpu->samples[cpu->sample_ptr].mperf -= cpu->prev_mperf; + + intel_pstate_calc_busy(cpu, &cpu->samples[cpu->sample_ptr]); - cpu->prev_sample = now; - cpu->prev_idle_time_us = idle_time_us; cpu->prev_aperf = aperf; cpu->prev_mperf = mperf; } -- cgit v1.2.3 From d8f469e9cff3bc4a6317d923e9506be046aa7bdc Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Tue, 7 May 2013 08:20:26 -0700 Subject: cpufreq / intel_pstate: use lowest requested max performance There are two ways that the maximum p-state can be clamped, via a policy change and via the sysfs file. The acpi-thermal driver adjusts the p-state policy in response to thermal events. These changes override the users settings at the moment. Use the lowest of the two requested values this ensures that we will not exceed the requested pstate from either mechanism. Reported-by: Srinivas Pandruvada Cc: 3.9+ Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index c6e10d02b795..4a437ffc5186 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -117,6 +117,8 @@ struct perf_limits { int min_perf_pct; int32_t max_perf; int32_t min_perf; + int max_policy_pct; + int max_sysfs_pct; }; static struct perf_limits limits = { @@ -125,6 +127,8 @@ static struct perf_limits limits = { .max_perf = int_tofp(1), .min_perf_pct = 0, .min_perf = 0, + .max_policy_pct = 100, + .max_sysfs_pct = 100, }; static inline void pid_reset(struct _pid *pid, int setpoint, int busy, @@ -295,7 +299,8 @@ static ssize_t store_max_perf_pct(struct kobject *a, struct attribute *b, if (ret != 1) return -EINVAL; - limits.max_perf_pct = clamp_t(int, input, 0 , 100); + limits.max_sysfs_pct = clamp_t(int, input, 0 , 100); + limits.max_perf_pct = min(limits.max_policy_pct, limits.max_sysfs_pct); limits.max_perf = div_fp(int_tofp(limits.max_perf_pct), int_tofp(100)); return count; } @@ -646,8 +651,9 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy) limits.min_perf_pct = clamp_t(int, limits.min_perf_pct, 0 , 100); limits.min_perf = div_fp(int_tofp(limits.min_perf_pct), int_tofp(100)); - limits.max_perf_pct = policy->max * 100 / policy->cpuinfo.max_freq; - limits.max_perf_pct = clamp_t(int, limits.max_perf_pct, 0 , 100); + limits.max_policy_pct = policy->max * 100 / policy->cpuinfo.max_freq; + limits.max_policy_pct = clamp_t(int, limits.max_policy_pct, 0 , 100); + limits.max_perf_pct = min(limits.max_policy_pct, limits.max_sysfs_pct); limits.max_perf = div_fp(int_tofp(limits.max_perf_pct), int_tofp(100)); return 0; -- cgit v1.2.3 From ca182aee389f8026401510f4c63841cb02c820e8 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Tue, 7 May 2013 08:20:27 -0700 Subject: cpufreq / intel_pstate: fix ffmpeg regression The ffmpeg benchmark in the phoronix test suite has threads on multiple cores that rely on the progress on of threads on other cores and ping pong back and forth fast enough to make the core appear less busy than it "should" be. If the core has been at minimum p-state for a while bump the pstate up to kick the core to see if it is in this ping pong state. If the core is truly idle the p-state will be reduced at the next sample time. If the core makes more progress it will send more work to the thread bringing both threads out of the ping pong scenario and the p-state will be selected normally. This fixes a performance regression of approximately 30% Cc: 3.9+ Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 4a437ffc5186..a7f1946b3452 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -551,22 +551,16 @@ static void intel_pstate_timer_func(unsigned long __data) struct cpudata *cpu = (struct cpudata *) __data; intel_pstate_sample(cpu); + intel_pstate_adjust_busy_pstate(cpu); - if (!cpu->idle_mode) - intel_pstate_adjust_busy_pstate(cpu); - else - intel_pstate_adjust_idle_pstate(cpu); - -#if defined(XPERF_FIX) if (cpu->pstate.current_pstate == cpu->pstate.min_pstate) { cpu->min_pstate_count++; if (!(cpu->min_pstate_count % 5)) { intel_pstate_set_pstate(cpu, cpu->pstate.max_pstate); - intel_pstate_idle_mode(cpu); } } else cpu->min_pstate_count = 0; -#endif + intel_pstate_set_sample_time(cpu); } -- cgit v1.2.3 From a73108d578559c83e35fa386a4058142a019b8d4 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Tue, 7 May 2013 08:20:28 -0700 Subject: cpufreq / intel_pstate: Remove idle mode PID Remove dead code from the driver. Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 49 ------------------------------------------ 1 file changed, 49 deletions(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index a7f1946b3452..b93e3851b5d3 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -81,10 +81,8 @@ struct cpudata { struct pstate_adjust_policy *pstate_policy; struct pstate_data pstate; struct _pid pid; - struct _pid idle_pid; int min_pstate_count; - int idle_mode; u64 prev_aperf; u64 prev_mperf; @@ -199,19 +197,6 @@ static inline void intel_pstate_busy_pid_reset(struct cpudata *cpu) 0); } -static inline void intel_pstate_idle_pid_reset(struct cpudata *cpu) -{ - pid_p_gain_set(&cpu->idle_pid, cpu->pstate_policy->p_gain_pct); - pid_d_gain_set(&cpu->idle_pid, cpu->pstate_policy->d_gain_pct); - pid_i_gain_set(&cpu->idle_pid, cpu->pstate_policy->i_gain_pct); - - pid_reset(&cpu->idle_pid, - 75, - 50, - cpu->pstate_policy->deadband, - 0); -} - static inline void intel_pstate_reset_all_pid(void) { unsigned int cpu; @@ -481,16 +466,6 @@ static inline void intel_pstate_set_sample_time(struct cpudata *cpu) mod_timer_pinned(&cpu->timer, jiffies + delay); } -static inline void intel_pstate_idle_mode(struct cpudata *cpu) -{ - cpu->idle_mode = 1; -} - -static inline void intel_pstate_normal_mode(struct cpudata *cpu) -{ - cpu->idle_mode = 0; -} - static inline int intel_pstate_get_scaled_busy(struct cpudata *cpu) { int32_t busy_scaled; @@ -523,29 +498,6 @@ static inline void intel_pstate_adjust_busy_pstate(struct cpudata *cpu) intel_pstate_pstate_decrease(cpu, steps); } -static inline void intel_pstate_adjust_idle_pstate(struct cpudata *cpu) -{ - int busy_scaled; - struct _pid *pid; - int ctl = 0; - int steps; - - pid = &cpu->idle_pid; - - busy_scaled = intel_pstate_get_scaled_busy(cpu); - - ctl = pid_calc(pid, 100 - busy_scaled); - - steps = abs(ctl); - if (ctl < 0) - intel_pstate_pstate_decrease(cpu, steps); - else - intel_pstate_pstate_increase(cpu, steps); - - if (cpu->pstate.current_pstate == cpu->pstate.min_pstate) - intel_pstate_normal_mode(cpu); -} - static void intel_pstate_timer_func(unsigned long __data) { struct cpudata *cpu = (struct cpudata *) __data; @@ -601,7 +553,6 @@ static int intel_pstate_init_cpu(unsigned int cpunum) (unsigned long)cpu; cpu->timer.expires = jiffies + HZ/100; intel_pstate_busy_pid_reset(cpu); - intel_pstate_idle_pid_reset(cpu); intel_pstate_sample(cpu); intel_pstate_set_pstate(cpu, cpu->pstate.max_pstate); -- cgit v1.2.3 From 35363e943f2b0aa503e1dd55f894f736563e85a3 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Tue, 7 May 2013 08:20:30 -0700 Subject: cpufreq / intel_pstate: remove #ifdef MODULE compile fence The driver can no longer be built as a module remove the compile fence around cpufreq tracing call. Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index b93e3851b5d3..0cc7d60525ac 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -391,9 +391,8 @@ static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate) if (pstate == cpu->pstate.current_pstate) return; -#ifndef MODULE trace_cpu_frequency(pstate * 100000, cpu->cpu); -#endif + cpu->pstate.current_pstate = pstate; wrmsrl(MSR_IA32_PERF_CTL, pstate << 8); -- cgit v1.2.3 From d96f7330176d69a9415162fb341b87e724e9ca74 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 10 May 2013 08:16:48 +0000 Subject: cpufreq / kirkwood: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/kirkwood-cpufreq.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c index d36ea8dc96eb..b2644af985ec 100644 --- a/drivers/cpufreq/kirkwood-cpufreq.c +++ b/drivers/cpufreq/kirkwood-cpufreq.c @@ -171,10 +171,6 @@ static int kirkwood_cpufreq_probe(struct platform_device *pdev) priv.dev = &pdev->dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Cannot get memory resource\n"); - return -ENODEV; - } priv.base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv.base)) return PTR_ERR(priv.base); -- cgit v1.2.3 From d5e1670afe0c886d6dd92afb7a1f085f88294dc8 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Wed, 8 May 2013 01:14:32 +0200 Subject: PM: Avoid calling kfree() under spinlock in dev_pm_put_subsys_data() Fix dev_pm_put_subsys_data() so that it doesn't call kfree() under a spinlock and make it return 1 whenever it leaves NULL power.subsys_data (regardless of the reason). Signed-off-by: Shuah Khan Reviewed-by: Pavel Machek Acked-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki --- drivers/base/power/common.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/base/power/common.c b/drivers/base/power/common.c index 39c32529b833..5da914041305 100644 --- a/drivers/base/power/common.c +++ b/drivers/base/power/common.c @@ -61,24 +61,24 @@ EXPORT_SYMBOL_GPL(dev_pm_get_subsys_data); int dev_pm_put_subsys_data(struct device *dev) { struct pm_subsys_data *psd; - int ret = 0; + int ret = 1; spin_lock_irq(&dev->power.lock); psd = dev_to_psd(dev); - if (!psd) { - ret = -EINVAL; + if (!psd) goto out; - } if (--psd->refcount == 0) { dev->power.subsys_data = NULL; - kfree(psd); - ret = 1; + } else { + psd = NULL; + ret = 0; } out: spin_unlock_irq(&dev->power.lock); + kfree(psd); return ret; } -- cgit v1.2.3 From 29589f06d2430efb76c227b0117029ebd3101eec Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:46 +0200 Subject: drivers/ata: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/ata/pata_ep93xx.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c index c1bfaf43d109..980b88e109fc 100644 --- a/drivers/ata/pata_ep93xx.c +++ b/drivers/ata/pata_ep93xx.c @@ -933,11 +933,6 @@ static int ep93xx_pata_probe(struct platform_device *pdev) } mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem_res) { - err = -ENXIO; - goto err_rel_gpio; - } - ide_base = devm_ioremap_resource(&pdev->dev, mem_res); if (IS_ERR(ide_base)) { err = PTR_ERR(ide_base); -- cgit v1.2.3 From 2a9ba2ee5f440dd6712ebcb5011e9f00309187c5 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:46 +0200 Subject: drivers/char/hw_random: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/char/hw_random/mxc-rnga.c | 6 ------ drivers/char/hw_random/omap-rng.c | 5 ----- 2 files changed, 11 deletions(-) diff --git a/drivers/char/hw_random/mxc-rnga.c b/drivers/char/hw_random/mxc-rnga.c index 4ca35e8a5d8c..19a12ac64a9e 100644 --- a/drivers/char/hw_random/mxc-rnga.c +++ b/drivers/char/hw_random/mxc-rnga.c @@ -167,11 +167,6 @@ static int __init mxc_rnga_probe(struct platform_device *pdev) clk_prepare_enable(mxc_rng->clk); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - err = -ENOENT; - goto err_region; - } - mxc_rng->mem = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(mxc_rng->mem)) { err = PTR_ERR(mxc_rng->mem); @@ -189,7 +184,6 @@ static int __init mxc_rnga_probe(struct platform_device *pdev) return 0; err_ioremap: -err_region: clk_disable_unprepare(mxc_rng->clk); out: diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c index 749dc16ca2cc..d2903e772270 100644 --- a/drivers/char/hw_random/omap-rng.c +++ b/drivers/char/hw_random/omap-rng.c @@ -119,11 +119,6 @@ static int omap_rng_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, priv); priv->mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!priv->mem_res) { - ret = -ENOENT; - goto err_ioremap; - } - priv->base = devm_ioremap_resource(&pdev->dev, priv->mem_res); if (IS_ERR(priv->base)) { ret = PTR_ERR(priv->base); -- cgit v1.2.3 From 72cd7447e72a13ce72d760b42ec295430f77300a Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 17 Apr 2013 12:05:58 +0200 Subject: ARM i.MX6q: Fix periph_clk2_sel and periph2_clk2_sel clocks The periph_clk2_sel mux can be set to pll3, osc/pll1_ref_clk, or osc/ pll2_burn_in_clk. The periph2_clk2_sel mux can be set to pll3 or pll2. Signed-off-by: Philipp Zabel Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 151259003086..ca1717135820 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -177,7 +177,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; -static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", }; @@ -369,8 +370,8 @@ int __init mx6q_clocks_init(void) clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); - clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); - clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels)); clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); -- cgit v1.2.3 From 0e574461c4c915a065dd75c894edb653ce99be9c Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Mon, 22 Apr 2013 08:00:34 +0200 Subject: ARM i.MX6: correct MLB clock configuration According to the i.MX6 Dual/Quad technical reference manual (Figure 18-2. Clock Tree - Part 1) the MLB clock is directly feed by the AXI_CLK_ROOT. This is called 'axi' in our code. Note that the clock of the MLB IP block on the i.MX6 is completely independent of the PLL8 (MLB PLL). The MLB PLL isn't responsible for feeding the MLB IP block with a clock. Instead, it's used internally by the MLB module to sync the bus clock in case the MLB 6-pin interface is enabled: MediaLB Control 0 Register, MLB150_MLBC0[5], MLBPEN: 1 MediaLB 6-pin interface enabled. MLB PLL and MLB PHY is enabled in this case. I.e. the PLL8 MLB PLL has to be handled by the MLB driver and isn't needed for clocking the MLB module itself. Signed-off-by: Dirk Behme CC: Jiada Wang Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ca1717135820..f2e1c62cf3ce 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -499,7 +499,7 @@ int __init mx6q_clocks_init(void) clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16); - clk[mlb] = imx_clk_gate2("mlb", "pll8_mlb", base + 0x74, 18); + clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18); clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20); clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22); clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); -- cgit v1.2.3 From 087bb28329f3ccda4e50cb4cf297542d7e773e20 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 16 Apr 2013 22:11:19 +0800 Subject: ARM: imx: replicate the diagnostic register of boot cpu into secondary cores The diagnostic register holds the errata bits. Mostly bootloader does not bring up secondary cores, so that when errata bits are set in bootloader, they are set only for boot cpu. But on a SMP configuration, it should be equally done on every single core. Set up the diagnostic register for secondary cores by replicating the register from boot cpu. Signed-off-by: Shawn Guo Acked-by: Dirk Behme --- arch/arm/mach-imx/headsmp.S | 12 ++++++++++++ arch/arm/mach-imx/platsmp.c | 14 ++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 67b9c48dcafe..627f16f0e9d1 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -18,8 +18,20 @@ .section ".text.head", "ax" #ifdef CONFIG_SMP +diag_reg_offset: + .word g_diag_reg - . + + .macro set_diag_reg + adr r0, diag_reg_offset + ldr r1, [r0] + add r1, r1, r0 @ r1 = physical &g_diag_reg + ldr r0, [r1] + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + .endm + ENTRY(v7_secondary_startup) bl v7_invalidate_l1 + set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) #endif diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 4a69305db65e..c6e1ab544882 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -21,6 +22,7 @@ #define SCU_STANDBY_ENABLE (1 << 5) +u32 g_diag_reg; static void __iomem *scu_base; static struct map_desc scu_io_desc __initdata = { @@ -80,6 +82,18 @@ void imx_smp_prepare(void) static void __init imx_smp_prepare_cpus(unsigned int max_cpus) { imx_smp_prepare(); + + /* + * The diagnostic register holds the errata bits. Mostly bootloader + * does not bring up secondary cores, so that when errata bits are set + * in bootloader, they are set only for boot cpu. But on a SMP + * configuration, it should be equally done on every single core. + * Read the register from boot cpu here, and will replicate it into + * secondary cores when booting them. + */ + asm("mrc p15, 0, %0, c15, c0, 1" : "=r" (g_diag_reg) : : "cc"); + __cpuc_flush_dcache_area(&g_diag_reg, sizeof(g_diag_reg)); + outer_clean_range(__pa(&g_diag_reg), __pa(&g_diag_reg + 1)); } struct smp_operations imx_smp_ops __initdata = { -- cgit v1.2.3 From de78a23d73ba7f1d08f3e1aeaa0a03cb912c62a0 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 3 May 2013 10:55:46 +0800 Subject: ARM: imx: fix typo in gpu3d_shader_sels There is no clock pll2_pfd9_720m. Instead it should be pll3_pfd0_720m. Fix the typo in gpu3d_shader_sels. Signed-off-by: Shawn Guo Acked-by: Dirk Behme --- arch/arm/mach-imx/clk-imx6q.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index f2e1c62cf3ce..dda9a2bd3acb 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -186,7 +186,7 @@ static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd static const char *gpu_axi_sels[] = { "axi", "ahb", }; static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", }; static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; -static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", }; +static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", }; static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; -- cgit v1.2.3 From ed7951dc13aad4a14695ec8122e9f0e2ef25d39e Mon Sep 17 00:00:00 2001 From: "Lespiau, Damien" Date: Fri, 10 May 2013 12:36:42 +0000 Subject: drm: Make the HPD status updates debug logs more readable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Instead of just printing "status updated from 1 to 2", make those enum numbers immediately readable. v2: Also patch output_poll_execute() (Daniel Vetter) v3: Use drm_get_connector_status_name (Ville Syrjälä) Signed-off-by: Damien Lespiau Reviewed-by: Jesse Barnes (for v1) Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc.c | 1 + drivers/gpu/drm/drm_crtc_helper.c | 10 ++++++---- 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index d7c449f0b110..e7e92429d10f 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -250,6 +250,7 @@ char *drm_get_connector_status_name(enum drm_connector_status status) else return "unknown"; } +EXPORT_SYMBOL(drm_get_connector_status_name); /** * drm_mode_object_get - allocate a new modeset identifier diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 62f45ad56dc7..9085db634092 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -1007,10 +1007,11 @@ static void output_poll_execute(struct work_struct *work) continue; connector->status = connector->funcs->detect(connector, false); - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %d to %d\n", + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n", connector->base.id, drm_get_connector_name(connector), - old_status, connector->status); + drm_get_connector_status_name(old_status), + drm_get_connector_status_name(connector->status)); if (old_status != connector->status) changed = true; } @@ -1085,10 +1086,11 @@ void drm_helper_hpd_irq_event(struct drm_device *dev) old_status = connector->status; connector->status = connector->funcs->detect(connector, false); - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %d to %d\n", + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n", connector->base.id, drm_get_connector_name(connector), - old_status, connector->status); + drm_get_connector_status_name(old_status), + drm_get_connector_status_name(connector->status)); if (old_status != connector->status) changed = true; } -- cgit v1.2.3 From b2dfcae3cc6802e897556e09541080309cfdec60 Mon Sep 17 00:00:00 2001 From: "Lespiau, Damien" Date: Fri, 10 May 2013 12:36:44 +0000 Subject: drm: Only print a debug message when the polled connector has changed Suggested-by: Chris Wilson Signed-off-by: Damien Lespiau Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 9085db634092..ed1334e27c33 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -1007,13 +1007,20 @@ static void output_poll_execute(struct work_struct *work) continue; connector->status = connector->funcs->detect(connector, false); - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n", - connector->base.id, - drm_get_connector_name(connector), - drm_get_connector_status_name(old_status), - drm_get_connector_status_name(connector->status)); - if (old_status != connector->status) + if (old_status != connector->status) { + const char *old, *new; + + old = drm_get_connector_status_name(old_status); + new = drm_get_connector_status_name(connector->status); + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] " + "status updated from %s to %s\n", + connector->base.id, + drm_get_connector_name(connector), + old, new); + changed = true; + } } mutex_unlock(&dev->mode_config.mutex); -- cgit v1.2.3 From 9d8aa55ff6bd21f573581a29da32ad746f2edcfb Mon Sep 17 00:00:00 2001 From: Christopher Harvey Date: Fri, 12 Apr 2013 20:42:19 +0000 Subject: drm/mgag200: Don't change unrelated registers during modeset Registers in indices below 0x18 are totally unrelated to modesetting, so don't write 0's, or anything else into them on modeset. Most of these registers are hardware cursor related, so this existing code interferes with hardware cursor development. Signed-off-by: Christopher Harvey Tested-by: Julia Lemire Acked-by: Julia Lemire Acked-by: Mathieu Larouche Signed-off-by: Dave Airlie --- drivers/gpu/drm/mgag200/mgag200_mode.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index 7337013a4a0e..2affe7af6cbb 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -832,11 +832,7 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc, for (i = 0; i < sizeof(dacvalue); i++) { - if ((i <= 0x03) || - (i == 0x07) || - (i == 0x0b) || - (i == 0x0f) || - ((i >= 0x13) && (i <= 0x17)) || + if ((i <= 0x17) || (i == 0x1b) || (i == 0x1c) || ((i >= 0x1f) && (i <= 0x29)) || -- cgit v1.2.3 From fb70a6690875315a3a1454e52fa339441ee7612b Mon Sep 17 00:00:00 2001 From: Christopher Harvey Date: Fri, 12 Apr 2013 22:24:05 +0000 Subject: drm/mgag200: Fix writes into MGA1064_PIX_CLK_CTL register The original line, WREG_DAC(MGA1064_PIX_CLK_CTL_CLK_DIS, tmp); wrote tmp into MGA1064_PIX_CLK_CTL_CLK_DIS, where MGA1064_PIX_CLK_CTL_CLK_DIS is an offset into MGA1064_PIX_CLK_CTL. Change the line to write properly into MGA1064_PIX_CLK_CTL. There were other chunks of code nearby that use the same pattern (but work correctly), so this patch updates them all to use this new (slightly more efficient) write pattern. The WREG_DAC macro was causing the DAC_INDEX register to be set to the same value twice. WREG8(DAC_DATA, foo) takes advantage of the fact that DAC_INDEX is already at the value we want. Signed-off-by: Christopher Harvey Acked-by: Julia Lemire Tested-by: Julia Lemire Acked-by: Mathieu Larouche Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/mgag200/mgag200_mode.c | 42 +++++++++++++++++----------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index 2affe7af6cbb..d983868ebd35 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -189,12 +189,12 @@ static int mga_g200wb_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS; - WREG_DAC(MGA1064_PIX_CLK_CTL_CLK_DIS, tmp); + WREG8(DAC_DATA, tmp); WREG8(DAC_INDEX, MGA1064_REMHEADCTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_REMHEADCTL_CLKDIS; - WREG_DAC(MGA1064_REMHEADCTL, tmp); + WREG8(DAC_DATA, tmp); /* select PLL Set C */ tmp = RREG8(MGAREG_MEM_MISC_READ); @@ -204,7 +204,7 @@ static int mga_g200wb_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN | 0x80; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); udelay(500); @@ -212,7 +212,7 @@ static int mga_g200wb_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_VREF_CTL); tmp = RREG8(DAC_DATA); tmp &= ~0x04; - WREG_DAC(MGA1064_VREF_CTL, tmp); + WREG8(DAC_DATA, tmp); udelay(50); @@ -236,13 +236,13 @@ static int mga_g200wb_set_plls(struct mga_device *mdev, long clock) tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_SEL_MSK; tmp |= MGA1064_PIX_CLK_CTL_SEL_PLL; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); WREG8(DAC_INDEX, MGA1064_REMHEADCTL); tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_REMHEADCTL_CLKSL_MSK; tmp |= MGA1064_REMHEADCTL_CLKSL_PLL; - WREG_DAC(MGA1064_REMHEADCTL, tmp); + WREG8(DAC_DATA, tmp); /* reset dotclock rate bit */ WREG8(MGAREG_SEQ_INDEX, 1); @@ -253,7 +253,7 @@ static int mga_g200wb_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); vcount = RREG8(MGAREG_VCOUNT); @@ -318,7 +318,7 @@ static int mga_g200ev_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS; - WREG_DAC(MGA1064_PIX_CLK_CTL_CLK_DIS, tmp); + WREG8(DAC_DATA, tmp); tmp = RREG8(MGAREG_MEM_MISC_READ); tmp |= 0x3 << 2; @@ -326,12 +326,12 @@ static int mga_g200ev_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_PLL_STAT); tmp = RREG8(DAC_DATA); - WREG_DAC(MGA1064_PIX_PLL_STAT, tmp & ~0x40); + WREG8(DAC_DATA, tmp & ~0x40); WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); WREG_DAC(MGA1064_EV_PIX_PLLC_M, m); WREG_DAC(MGA1064_EV_PIX_PLLC_N, n); @@ -342,7 +342,7 @@ static int mga_g200ev_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_CLK_POW_DOWN; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); udelay(500); @@ -350,11 +350,11 @@ static int mga_g200ev_set_plls(struct mga_device *mdev, long clock) tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_SEL_MSK; tmp |= MGA1064_PIX_CLK_CTL_SEL_PLL; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); WREG8(DAC_INDEX, MGA1064_PIX_PLL_STAT); tmp = RREG8(DAC_DATA); - WREG_DAC(MGA1064_PIX_PLL_STAT, tmp | 0x40); + WREG8(DAC_DATA, tmp | 0x40); tmp = RREG8(MGAREG_MEM_MISC_READ); tmp |= (0x3 << 2); @@ -363,7 +363,7 @@ static int mga_g200ev_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); return 0; } @@ -416,7 +416,7 @@ static int mga_g200eh_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS; - WREG_DAC(MGA1064_PIX_CLK_CTL_CLK_DIS, tmp); + WREG8(DAC_DATA, tmp); tmp = RREG8(MGAREG_MEM_MISC_READ); tmp |= 0x3 << 2; @@ -425,7 +425,7 @@ static int mga_g200eh_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); udelay(500); @@ -439,13 +439,13 @@ static int mga_g200eh_set_plls(struct mga_device *mdev, long clock) tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_SEL_MSK; tmp |= MGA1064_PIX_CLK_CTL_SEL_PLL; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS; tmp &= ~MGA1064_PIX_CLK_CTL_CLK_POW_DOWN; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); vcount = RREG8(MGAREG_VCOUNT); @@ -515,12 +515,12 @@ static int mga_g200er_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS; - WREG_DAC(MGA1064_PIX_CLK_CTL_CLK_DIS, tmp); + WREG8(DAC_DATA, tmp); WREG8(DAC_INDEX, MGA1064_REMHEADCTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_REMHEADCTL_CLKDIS; - WREG_DAC(MGA1064_REMHEADCTL, tmp); + WREG8(DAC_DATA, tmp); tmp = RREG8(MGAREG_MEM_MISC_READ); tmp |= (0x3<<2) | 0xc0; @@ -530,7 +530,7 @@ static int mga_g200er_set_plls(struct mga_device *mdev, long clock) tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS; tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); udelay(500); -- cgit v1.2.3 From 3cdc0e8d6142aaf3eb84a53eab6de1160da290a3 Mon Sep 17 00:00:00 2001 From: Christopher Harvey Date: Mon, 6 May 2013 15:56:17 +0000 Subject: drm/mgag200: Convert counter delays to jiffies Signed-off-by: Christopher Harvey Acked-by: Julia Lemire Tested-by: Julia Lemire Acked-by: Mathieu Larouche Signed-off-by: Dave Airlie --- drivers/gpu/drm/mgag200/mgag200_mode.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index d983868ebd35..0326989a6aec 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -46,29 +46,26 @@ static void mga_crtc_load_lut(struct drm_crtc *crtc) static inline void mga_wait_vsync(struct mga_device *mdev) { - unsigned int count = 0; + unsigned long timeout = jiffies + HZ/10; unsigned int status = 0; do { status = RREG32(MGAREG_Status); - count++; - } while ((status & 0x08) && (count < 250000)); - count = 0; + } while ((status & 0x08) && time_before(jiffies, timeout)); + timeout = jiffies + HZ/10; status = 0; do { status = RREG32(MGAREG_Status); - count++; - } while (!(status & 0x08) && (count < 250000)); + } while (!(status & 0x08) && time_before(jiffies, timeout)); } static inline void mga_wait_busy(struct mga_device *mdev) { - unsigned int count = 0; + unsigned long timeout = jiffies + HZ; unsigned int status = 0; do { status = RREG8(MGAREG_Status + 2); - count++; - } while ((status & 0x01) && (count < 500000)); + } while ((status & 0x01) && time_before(jiffies, timeout)); } /* -- cgit v1.2.3 From 9f1d036648c1c5ed81b0e98d7a06d55df972701e Mon Sep 17 00:00:00 2001 From: Christopher Harvey Date: Wed, 8 May 2013 19:10:38 +0000 Subject: drm/mgag200: Fix framebuffer base address programming Higher bits of the base address of framebuffers weren't being programmed properly. This caused framebuffers that didn't happen to be allocated at a low enough address to not be displayed properly. Signed-off-by: Christopher Harvey Signed-off-by: Mathieu Larouche Acked-by: Julia Lemire Tested-by: Julia Lemire Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/mgag200/mgag200_mode.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index 0326989a6aec..e8e20c653b1d 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -654,12 +654,26 @@ static void mga_g200wb_commit(struct drm_crtc *crtc) WREG_DAC(MGA1064_GEN_IO_DATA, tmp); } - +/* + This is how the framebuffer base address is stored in g200 cards: + * Assume @offset is the gpu_addr variable of the framebuffer object + * Then addr is the number of _pixels_ (not bytes) from the start of + VRAM to the first pixel we want to display. (divided by 2 for 32bit + framebuffers) + * addr is stored in the CRTCEXT0, CRTCC and CRTCD registers + addr<20> -> CRTCEXT0<6> + addr<19-16> -> CRTCEXT0<3-0> + addr<15-8> -> CRTCC<7-0> + addr<7-0> -> CRTCD<7-0> + CRTCEXT0 has to be programmed last to trigger an update and make the + new addr variable take effect. + */ void mga_set_start_address(struct drm_crtc *crtc, unsigned offset) { struct mga_device *mdev = crtc->dev->dev_private; u32 addr; int count; + u8 crtcext0; while (RREG8(0x1fda) & 0x08); while (!(RREG8(0x1fda) & 0x08)); @@ -667,10 +681,17 @@ void mga_set_start_address(struct drm_crtc *crtc, unsigned offset) count = RREG8(MGAREG_VCOUNT) + 2; while (RREG8(MGAREG_VCOUNT) < count); - addr = offset >> 2; + WREG8(MGAREG_CRTCEXT_INDEX, 0); + crtcext0 = RREG8(MGAREG_CRTCEXT_DATA); + crtcext0 &= 0xB0; + addr = offset / 8; + /* Can't store addresses any higher than that... + but we also don't have more than 16MB of memory, so it should be fine. */ + WARN_ON(addr > 0x1fffff); + crtcext0 |= (!!(addr & (1<<20)))<<6; WREG_CRT(0x0d, (u8)(addr & 0xff)); WREG_CRT(0x0c, (u8)(addr >> 8) & 0xff); - WREG_CRT(0xaf, (u8)(addr >> 16) & 0xf); + WREG_ECRT(0x0, ((u8)(addr >> 16) & 0xf) | crtcext0); } -- cgit v1.2.3 From fefaedcfb82d2e57c2320acf60604ab03b750cc0 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Sun, 12 May 2013 22:00:51 -0700 Subject: drm/radeon: check incoming cliprects pointer The "boxes" parameter points into userspace memory. It should be verified like any other operation against user memory. Signed-off-by: Kees Cook Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r300_cmdbuf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/r300_cmdbuf.c b/drivers/gpu/drm/radeon/r300_cmdbuf.c index 865e2c9980db..60170ea5e3a2 100644 --- a/drivers/gpu/drm/radeon/r300_cmdbuf.c +++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c @@ -75,7 +75,7 @@ static int r300_emit_cliprects(drm_radeon_private_t *dev_priv, OUT_RING(CP_PACKET0(R300_RE_CLIPRECT_TL_0, nr * 2 - 1)); for (i = 0; i < nr; ++i) { - if (DRM_COPY_FROM_USER_UNCHECKED + if (DRM_COPY_FROM_USER (&box, &cmdbuf->boxes[n + i], sizeof(box))) { DRM_ERROR("copy cliprect faulted\n"); return -EFAULT; -- cgit v1.2.3 From 95643359f8b31e74b35901f4e36cd069cd67fd48 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 13 May 2013 15:23:49 +1000 Subject: drm: remove unused wrapper macros We don't use these anymore so nuke them. Signed-off-by: Dave Airlie --- include/drm/drm_os_linux.h | 9 --------- 1 file changed, 9 deletions(-) diff --git a/include/drm/drm_os_linux.h b/include/drm/drm_os_linux.h index 393369147a2d..675ddf4b441f 100644 --- a/include/drm/drm_os_linux.h +++ b/include/drm/drm_os_linux.h @@ -87,15 +87,6 @@ static __inline__ int mtrr_del(int reg, unsigned long base, unsigned long size) /** Other copying of data from kernel space */ #define DRM_COPY_TO_USER(arg1, arg2, arg3) \ copy_to_user(arg1, arg2, arg3) -/* Macros for copyfrom user, but checking readability only once */ -#define DRM_VERIFYAREA_READ( uaddr, size ) \ - (access_ok( VERIFY_READ, uaddr, size ) ? 0 : -EFAULT) -#define DRM_COPY_FROM_USER_UNCHECKED(arg1, arg2, arg3) \ - __copy_from_user(arg1, arg2, arg3) -#define DRM_COPY_TO_USER_UNCHECKED(arg1, arg2, arg3) \ - __copy_to_user(arg1, arg2, arg3) -#define DRM_GET_USER_UNCHECKED(val, uaddr) \ - __get_user(val, uaddr) #define DRM_HZ HZ -- cgit v1.2.3 From d34c671debe3d327424a9951a5c3a81065d0474d Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 18 Apr 2013 22:44:29 +0200 Subject: ARM: sunxi: Fix Mini X-plus device tree build Commit b00adbe0 ("ARM: sunxi: Rename uart nodes to serial") changed the node names in the DTSI, changes that were not accordingly made to the Mini X-Plus device tree. This breakage slipped through because it was not properly declared in the Makefile. Fix both issues. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 4 +++- arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 4 ++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b9f7121e6ecf..f0895c581a89 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -177,7 +177,9 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb -dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \ +dtb-$(CONFIG_ARCH_SUNXI) += \ + sun4i-a10-cubieboard.dtb \ + sun4i-a10-mini-xplus.dtb \ sun4i-a10-hackberry.dtb \ sun5i-a13-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index 4a7c35d6726a..078ed7f618d7 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -22,8 +22,8 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc { - uart0: uart@01c28000 { + soc@01c20000 { + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; -- cgit v1.2.3 From 182a6f73ec6bc83ce9b72eec20fa1c6901338c16 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Fri, 19 Apr 2013 11:53:07 +0100 Subject: arm64: Fix duplicate definition of early_console When compiling with allmodconfig. early_console is already defined as an extern global pointer. Need let it point to the object which we intend to (like arm32 done). Signed-off-by: Chen Gang Acked-by: Arnd Bergmann Signed-off-by: Catalin Marinas --- arch/arm64/kernel/early_printk.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kernel/early_printk.c b/arch/arm64/kernel/early_printk.c index ac974f48a7a2..fbb6e1843659 100644 --- a/arch/arm64/kernel/early_printk.c +++ b/arch/arm64/kernel/early_printk.c @@ -95,7 +95,7 @@ static void early_write(struct console *con, const char *s, unsigned n) } } -static struct console early_console = { +static struct console early_console_dev = { .name = "earlycon", .write = early_write, .flags = CON_PRINTBUFFER | CON_BOOT, @@ -145,7 +145,8 @@ static int __init setup_early_printk(char *buf) early_base = early_io_map(paddr, EARLYCON_IOBASE); printch = match->printch; - register_console(&early_console); + early_console = &early_console_dev; + register_console(&early_console_dev); return 0; } -- cgit v1.2.3 From 9c413e25d95fd3c0abe23eadad66191b22baa549 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 8 May 2013 17:01:12 +0100 Subject: arm64: debug: clear mdscr_el1 instead of taking the OS lock During boot, we take the debug OS lock before interrupts are enabled. This is required to prevent clearing of PSTATE.D on the interrupt entry path, which could result in spurious debug exceptions before we've got round to resetting things like the hardware breakpoints registers to a sane state. A problem with this approach is that taking the OS lock prevents an external JTAG debugger from debugging the system, which is especially irritating during boot, where JTAG debugging can be most useful. This patch clears mdscr_el1 rather than taking the lock, clearing the MDE and KDE bits and preventing self-hosted hardware debug exceptions from occurring. Tested-by: Mark Rutland Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas Cc: stable@vger.kernel.org --- arch/arm64/kernel/debug-monitors.c | 2 -- arch/arm64/mm/proc.S | 3 +-- 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index 0c3ba9f51376..f4726dc054b3 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -136,8 +136,6 @@ void disable_debug_monitors(enum debug_el el) */ static void clear_os_lock(void *unused) { - asm volatile("msr mdscr_el1, %0" : : "r" (0)); - isb(); asm volatile("msr oslar_el1, %0" : : "r" (0)); isb(); } diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index f1d8b9bbfdad..a82ae8868077 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -119,8 +119,7 @@ ENTRY(__cpu_setup) mov x0, #3 << 20 msr cpacr_el1, x0 // Enable FP/ASIMD - mov x0, #1 - msr oslar_el1, x0 // Set the debug OS lock + msr mdscr_el1, xzr // Reset mdscr_el1 tlbi vmalle1is // invalidate I + D TLBs /* * Memory region attributes for LPAE: -- cgit v1.2.3 From 60e6726c7bdec7fedae278ee3bf973ba988f2abf Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 8 May 2013 21:34:48 +0200 Subject: cpufreq, ondemand: Remove leftover debug line I don't see how the virtual address of the tuners pointer would be of any help to anyone so remove it. Signed-off-by: Borislav Petkov Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq_ondemand.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index b0ffef96bf77..4b9bb5def6f1 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -547,7 +547,6 @@ static int od_init(struct dbs_data *dbs_data) tuners->io_is_busy = should_io_be_busy(); dbs_data->tuners = tuners; - pr_info("%s: tuners %p\n", __func__, tuners); mutex_init(&dbs_data->mutex); return 0; } -- cgit v1.2.3 From 0a438d5b381e2bdfd5e02d653bf46fcc878356e3 Mon Sep 17 00:00:00 2001 From: Hema Prathaban Date: Sat, 11 May 2013 22:39:47 +0530 Subject: staging: vt6656: use free_netdev instead of kfree use free_netdev() instead of kfree(pDevice->apdev) Signed-off-by: Hema Prathaban Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6656/hostap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/vt6656/hostap.c b/drivers/staging/vt6656/hostap.c index f4f1bf7a30fd..c699a3058b39 100644 --- a/drivers/staging/vt6656/hostap.c +++ b/drivers/staging/vt6656/hostap.c @@ -133,7 +133,7 @@ static int hostap_disable_hostapd(struct vnt_private *pDevice, int rtnl_locked) DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n", pDevice->dev->name, pDevice->apdev->name); } - kfree(pDevice->apdev); + free_netdev(pDevice->apdev); pDevice->apdev = NULL; pDevice->bEnable8021x = false; pDevice->bEnableHostWEP = false; -- cgit v1.2.3 From 159c8cddd9259e9379f37f0a69ddcbb01c4e8b77 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 13 May 2013 21:37:26 +0800 Subject: hwmon: (iio_hwmon) Fix null pointer dereference This patch fixes the null pointer dereference in goto error_release_channels path when allocate memory for st fails. Reported-by: Dan Carpenter Signed-off-by: Axel Lin Signed-off-by: Guenter Roeck --- drivers/hwmon/iio_hwmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/iio_hwmon.c b/drivers/hwmon/iio_hwmon.c index 368497fa2627..52b77afebde1 100644 --- a/drivers/hwmon/iio_hwmon.c +++ b/drivers/hwmon/iio_hwmon.c @@ -161,7 +161,7 @@ static int iio_hwmon_probe(struct platform_device *pdev) error_remove_group: sysfs_remove_group(&dev->kobj, &st->attr_group); error_release_channels: - iio_channel_release_all(st->channels); + iio_channel_release_all(channels); return ret; } -- cgit v1.2.3 From e2555fde4159467fb579e6ae3c0a8fc33015d0f5 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 13 May 2013 09:45:01 -0400 Subject: jbd,jbd2: fix oops in jbd2_journal_put_journal_head() Commit ae4647fb (jbd2: reduce journal_head size) introduced a regression where we occasionally hit panic in jbd2_journal_put_journal_head() because of wrong b_jcount. The bug is caused by gcc making 64-bit access to 32-bit bitfield and thus clobbering b_jcount. At least for now, those 8 bytes saved in struct journal_head are not worth the trouble with gcc bitfield handling so revert that part of the patch. Reported-by: EUNBONG SONG Reported-by: Tony Luck Signed-off-by: Jan Kara Signed-off-by: "Theodore Ts'o" --- include/linux/journal-head.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/include/linux/journal-head.h b/include/linux/journal-head.h index 13a3da25ff07..98cd41bb39c8 100644 --- a/include/linux/journal-head.h +++ b/include/linux/journal-head.h @@ -30,15 +30,19 @@ struct journal_head { /* * Journalling list for this buffer [jbd_lock_bh_state()] + * NOTE: We *cannot* combine this with b_modified into a bitfield + * as gcc would then (which the C standard allows but which is + * very unuseful) make 64-bit accesses to the bitfield and clobber + * b_jcount if its update races with bitfield modification. */ - unsigned b_jlist:4; + unsigned b_jlist; /* * This flag signals the buffer has been modified by * the currently running transaction * [jbd_lock_bh_state()] */ - unsigned b_modified:1; + unsigned b_modified; /* * Copy of the buffer data frozen for writing to the log. -- cgit v1.2.3 From a62ee234a572b4c98fe98cf5fb18e4e8b0f6e43d Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sun, 12 May 2013 14:31:19 +0200 Subject: sound: Fix make allmodconfig on MIPS correctly Commit d4702b189c ("sound: Fix make allmodconfig on MIPS") added a (negative) dependency on ISA_DMA_SUPPORT_BROKEN. Since that Kconfig symbol doesn't exist, this dependency will always evaluate to true. Apparently GENERIC_ISA_DMA_SUPPORT_BROKEN was meant to be used here. Signed-off-by: Paul Bolle Signed-off-by: Takashi Iwai --- sound/oss/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig index 51c4ba95a32d..1a9640254433 100644 --- a/sound/oss/Kconfig +++ b/sound/oss/Kconfig @@ -250,7 +250,7 @@ config MSND_FIFOSIZE menuconfig SOUND_OSS tristate "OSS sound modules" depends on ISA_DMA_API && VIRT_TO_BUS - depends on !ISA_DMA_SUPPORT_BROKEN + depends on !GENERIC_ISA_DMA_SUPPORT_BROKEN help OSS is the Open Sound System suite of sound card drivers. They make sound programming easier since they provide a common API. Say Y or -- cgit v1.2.3 From ecacb0b17c08fae89f65468727f0e4b8e91da4e1 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 13 May 2013 14:01:43 +0800 Subject: hwmon: fix error return code in abituguru_probe() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck --- drivers/hwmon/abituguru.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c index df0b69987914..2ebd6ce46108 100644 --- a/drivers/hwmon/abituguru.c +++ b/drivers/hwmon/abituguru.c @@ -1414,14 +1414,18 @@ static int abituguru_probe(struct platform_device *pdev) pr_info("found Abit uGuru\n"); /* Register sysfs hooks */ - for (i = 0; i < sysfs_attr_i; i++) - if (device_create_file(&pdev->dev, - &data->sysfs_attr[i].dev_attr)) + for (i = 0; i < sysfs_attr_i; i++) { + res = device_create_file(&pdev->dev, + &data->sysfs_attr[i].dev_attr); + if (res) goto abituguru_probe_error; - for (i = 0; i < ARRAY_SIZE(abituguru_sysfs_attr); i++) - if (device_create_file(&pdev->dev, - &abituguru_sysfs_attr[i].dev_attr)) + } + for (i = 0; i < ARRAY_SIZE(abituguru_sysfs_attr); i++) { + res = device_create_file(&pdev->dev, + &abituguru_sysfs_attr[i].dev_attr); + if (res) goto abituguru_probe_error; + } data->hwmon_dev = hwmon_device_register(&pdev->dev); if (!IS_ERR(data->hwmon_dev)) -- cgit v1.2.3 From be3cd268d1d1837aaed937c2fc85b3d39d2f1b50 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 9 Apr 2013 23:26:18 +0200 Subject: ARM: mvebu: do not duplicate the mpic alias The mpic alias is already defined in the common armada-370-xp.dtsi, so there's no need to repeat it at the armada-xp.dtsi and armada-370.dtsi level. Signed-off-by: Thomas Petazzoni Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370.dtsi | 2 +- arch/arm/boot/dts/armada-xp.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index b2c1b5af9749..0c9130b6fb80 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -43,7 +43,7 @@ wt-override; }; - mpic: interrupt-controller@20000 { + interrupt-controller@20000 { reg = <0x20a00 0x1d0>, <0x21870 0x58>; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index bacab11c10dc..5b902f9a3af2 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -31,7 +31,7 @@ wt-override; }; - mpic: interrupt-controller@20000 { + interrupt-controller@20000 { reg = <0x20a00 0x2d0>, <0x21070 0x58>; }; -- cgit v1.2.3 From 99e11334dcb846f9b76fb808196c7f47aa83abb3 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Sun, 21 Apr 2013 17:14:00 +0100 Subject: Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x Enable KW_PCIE1 on QNAP TS-11x/TS-21x devices as newer revisions (rev 1.3) have a USB 3.0 chip from Etron on PCIe port 1. Thanks to Marek Vasut for identifying this issue! Cc: # v2.6.36.x Signed-off-by: Martin Michlmayr Tested-by: Marek Vasut Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/ts219-setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 283abff90228..e1267d6b468f 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -124,7 +124,7 @@ static void __init qnap_ts219_init(void) static int __init ts219_pci_init(void) { if (machine_is_ts219()) - kirkwood_pcie_init(KW_PCIE0); + kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0); return 0; } -- cgit v1.2.3 From 7c14068f5a08d57d5ea98ef3668218e654617095 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Fri, 10 May 2013 22:12:27 +0200 Subject: ARM: plat-orion: add missing ehci include to common.h Removing orion ehci include from board files will raise a compiler error because plat/common.h is using an enum provided by orion ehci but not including the include itself. This just adds the missing include. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper --- arch/arm/plat-orion/include/plat/common.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index e06fc5fefa14..d9a24f605a2b 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -10,6 +10,7 @@ #ifndef __PLAT_COMMON_H #include +#include struct dsa_platform_data; struct mv_sata_platform_data; -- cgit v1.2.3 From 1aa3d8d9935dfb459d64f06ccd828b56147fd971 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Wed, 8 May 2013 11:59:01 +0000 Subject: xen/arm: initialize pm functions later If we are running in dom0, we have to wait for the arch specific code to complete the initialization in order for us to successfully reset the power_off and pm_restart functions. Signed-off-by: Stefano Stabellini --- arch/arm/xen/enlighten.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index d30042e39974..83d13b0d5f74 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -272,12 +272,18 @@ static int __init xen_guest_init(void) if (!xen_initial_domain()) xenbus_probe(NULL); + return 0; +} +core_initcall(xen_guest_init); + +static int __init xen_pm_init(void) +{ pm_power_off = xen_power_off; arm_pm_restart = xen_restart; return 0; } -core_initcall(xen_guest_init); +subsys_initcall(xen_pm_init); static irqreturn_t xen_arm_callback(int irq, void *arg) { -- cgit v1.2.3 From d7266d7894b111dee9b081c05944533bc8780eca Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Wed, 8 May 2013 13:02:38 +0000 Subject: xen/arm: do not handle VCPUOP_register_vcpu_info failures We expect VCPUOP_register_vcpu_info to succeed, do not try to handle failures. Signed-off-by: Stefano Stabellini Acked-by: Ian Campbell --- arch/arm/xen/enlighten.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 83d13b0d5f74..3dfa2b5c787d 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -165,13 +165,9 @@ static int __init xen_secondary_init(unsigned int cpu) info.offset = offset_in_page(vcpup); err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, cpu, &info); - if (err) { - pr_debug("register_vcpu_info failed: err=%d\n", err); - } else { - /* This cpu is using the registered vcpu info, even if - later ones fail to. */ - per_cpu(xen_vcpu, cpu) = vcpup; - } + BUG_ON(err); + per_cpu(xen_vcpu, cpu) = vcpup; + return 0; } -- cgit v1.2.3 From 3cc8e40e8ff8e232a9dd672da81beabd09f87366 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Wed, 8 May 2013 11:59:01 +0000 Subject: xen/arm: rename xen_secondary_init and run it on every online cpu Rename xen_secondary_init to xen_percpu_init. Run xen_percpu_init on the each online cpu, reuse the current on_each_cpu call. Merge xen_percpu_enable_events into xen_percpu_init. Signed-off-by: Stefano Stabellini --- arch/arm/xen/enlighten.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 3dfa2b5c787d..13609e01f4b7 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -152,11 +152,12 @@ int xen_unmap_domain_mfn_range(struct vm_area_struct *vma, } EXPORT_SYMBOL_GPL(xen_unmap_domain_mfn_range); -static int __init xen_secondary_init(unsigned int cpu) +static void __init xen_percpu_init(void *unused) { struct vcpu_register_vcpu_info info; struct vcpu_info *vcpup; int err; + int cpu = get_cpu(); pr_info("Xen: initializing cpu%d\n", cpu); vcpup = per_cpu_ptr(xen_vcpu_info, cpu); @@ -168,7 +169,7 @@ static int __init xen_secondary_init(unsigned int cpu) BUG_ON(err); per_cpu(xen_vcpu, cpu) = vcpup; - return 0; + enable_percpu_irq(xen_events_irq, 0); } static void xen_restart(char str, const char *cmd) @@ -204,7 +205,6 @@ static int __init xen_guest_init(void) const char *version = NULL; const char *xen_prefix = "xen,xen-"; struct resource res; - int i; node = of_find_compatible_node(NULL, NULL, "xen,xen"); if (!node) { @@ -261,8 +261,6 @@ static int __init xen_guest_init(void) sizeof(struct vcpu_info)); if (xen_vcpu_info == NULL) return -ENOMEM; - for_each_online_cpu(i) - xen_secondary_init(i); gnttab_init(); if (!xen_initial_domain()) @@ -287,11 +285,6 @@ static irqreturn_t xen_arm_callback(int irq, void *arg) return IRQ_HANDLED; } -static __init void xen_percpu_enable_events(void *unused) -{ - enable_percpu_irq(xen_events_irq, 0); -} - static int __init xen_init_events(void) { if (!xen_domain() || xen_events_irq < 0) @@ -305,7 +298,7 @@ static int __init xen_init_events(void) return -EINVAL; } - on_each_cpu(xen_percpu_enable_events, NULL, 0); + on_each_cpu(xen_percpu_init, NULL, 0); return 0; } -- cgit v1.2.3 From 00ed4a0bd964555fe9276f2299564c384d50ae7d Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Mon, 13 May 2013 12:22:53 -0300 Subject: ARM: mvebu: Add a ranges entry to translate devbus childs With the latest device tree reorganization which introduced the 'internal-reg' node, now the only region translated is the internal register's. This makes the description of the hardware incomplete, for it lacks the Device Bus childs address space. In order to fix this, it's required to add a 'ranges' entry with a suitable address space to map Device Bus childs, on a per-board basis. Signed-off-by: Ezequiel Garcia Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index f14d36c46159..46b785064dd8 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -27,6 +27,9 @@ }; soc { + ranges = <0 0 0xd0000000 0x100000 + 0xf0000000 0 0xf0000000 0x8000000>; + internal-regs { serial@12000 { clock-frequency = <250000000>; -- cgit v1.2.3 From c10ebbf55b40503a46fb8b29824c9ca1ca089826 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Thu, 9 May 2013 14:56:32 -0500 Subject: libceph: init sent and completed when starting The rbd code has a need to be able to restart an osd request that has already been started and completed once before. This currently wouldn't work right because the osd client code assumes an osd request will be started exactly once Certain fields in a request are never cleared and this leads to trouble if you try to reuse it. Specifically, the r_sent, r_got_reply, and r_completed fields are never cleared. The r_sent field records the osd incarnation at the time the request was sent to that osd. If that's non-zero, the message won't get re-mapped to a target osd properly, and won't be put on the unsafe requests list the first time it's sent as it should. The r_got_reply field is used in handle_reply() to ensure the reply to a request is processed only once. And the r_completed field is used for lingering requests to avoid calling the callback function every time the osd client re-sends the request on behalf of its initiator. Each osd request passes through ceph_osdc_start_request() when responsibility for the request is handed over to the osd client for completion. We can safely zero these three fields there each time a request gets started. One last related change--clear the r_linger flag when a request is no longer registered as a linger request. This resolves: http://tracker.ceph.com/issues/5026 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- net/ceph/osd_client.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index a3395fdfbd4f..d5953b87918c 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -1204,6 +1204,7 @@ void ceph_osdc_unregister_linger_request(struct ceph_osd_client *osdc, mutex_lock(&osdc->request_mutex); if (req->r_linger) { __unregister_linger_request(osdc, req); + req->r_linger = 0; ceph_osdc_put_request(req); } mutex_unlock(&osdc->request_mutex); @@ -2120,7 +2121,9 @@ int ceph_osdc_start_request(struct ceph_osd_client *osdc, down_read(&osdc->map_sem); mutex_lock(&osdc->request_mutex); __register_request(osdc, req); - WARN_ON(req->r_sent); + req->r_sent = 0; + req->r_got_reply = 0; + req->r_completed = 0; rc = __map_request(osdc, req, 0); if (rc < 0) { if (nofail) { -- cgit v1.2.3 From ebda6408f2227a774343c3cc2861384942143ff3 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Fri, 10 May 2013 16:29:22 -0500 Subject: rbd: fix parent request size assumption The code that reads object data from the parent for a copyup on write request currently assumes that the size of that request is the size of a "full" object from the original target image. That is not necessarily the case. The parent overlap could reduce the request size below that. To fix that assumption we need to record the number of pages in the copyup_pages array, for both an image request and an object request. Rename a local variable in rbd_img_obj_parent_read_full_callback() to reflect we're recording the length of the parent read request, not the size of the target object. This resolves: http://tracker.ceph.com/issues/5038 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 51c45e793354..597b9bbe2fc7 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -224,6 +224,7 @@ struct rbd_obj_request { }; }; struct page **copyup_pages; + u32 copyup_page_count; struct ceph_osd_request *osd_req; @@ -256,6 +257,7 @@ struct rbd_img_request { struct rbd_obj_request *obj_request; /* obj req initiator */ }; struct page **copyup_pages; + u32 copyup_page_count; spinlock_t completion_lock;/* protects next_completion */ u32 next_completion; rbd_img_callback_t callback; @@ -2119,7 +2121,7 @@ rbd_img_obj_copyup_callback(struct rbd_obj_request *obj_request) { struct rbd_img_request *img_request; struct rbd_device *rbd_dev; - u64 length; + struct page **pages; u32 page_count; rbd_assert(obj_request->type == OBJ_REQUEST_BIO); @@ -2129,12 +2131,14 @@ rbd_img_obj_copyup_callback(struct rbd_obj_request *obj_request) rbd_dev = img_request->rbd_dev; rbd_assert(rbd_dev); - length = (u64)1 << rbd_dev->header.obj_order; - page_count = (u32)calc_pages_for(0, length); - rbd_assert(obj_request->copyup_pages); - ceph_release_page_vector(obj_request->copyup_pages, page_count); + pages = obj_request->copyup_pages; + rbd_assert(pages != NULL); obj_request->copyup_pages = NULL; + page_count = obj_request->copyup_page_count; + rbd_assert(page_count); + obj_request->copyup_page_count = 0; + ceph_release_page_vector(pages, page_count); /* * We want the transfer count to reflect the size of the @@ -2158,9 +2162,9 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) struct ceph_osd_client *osdc; struct rbd_device *rbd_dev; struct page **pages; + u32 page_count; int result; - u64 obj_size; - u64 xferred; + u64 parent_length; rbd_assert(img_request_child_test(img_request)); @@ -2169,19 +2173,21 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) pages = img_request->copyup_pages; rbd_assert(pages != NULL); img_request->copyup_pages = NULL; + page_count = img_request->copyup_page_count; + rbd_assert(page_count); + img_request->copyup_page_count = 0; orig_request = img_request->obj_request; rbd_assert(orig_request != NULL); rbd_assert(orig_request->type == OBJ_REQUEST_BIO); result = img_request->result; - obj_size = img_request->length; - xferred = img_request->xferred; + parent_length = img_request->length; + rbd_assert(parent_length == img_request->xferred); rbd_img_request_put(img_request); rbd_assert(orig_request->img_request); rbd_dev = orig_request->img_request->rbd_dev; rbd_assert(rbd_dev); - rbd_assert(obj_size == (u64)1 << rbd_dev->header.obj_order); if (result) goto out_err; @@ -2195,11 +2201,12 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) goto out_err; orig_request->osd_req = osd_req; orig_request->copyup_pages = pages; + orig_request->copyup_page_count = page_count; /* Initialize the copyup op */ osd_req_op_cls_init(osd_req, 0, CEPH_OSD_OP_CALL, "rbd", "copyup"); - osd_req_op_cls_request_data_pages(osd_req, 0, pages, obj_size, 0, + osd_req_op_cls_request_data_pages(osd_req, 0, pages, parent_length, 0, false, false); /* Then the original write request op */ @@ -2312,6 +2319,7 @@ static int rbd_img_obj_parent_read_full(struct rbd_obj_request *obj_request) if (result) goto out_err; parent_request->copyup_pages = pages; + parent_request->copyup_page_count = page_count; parent_request->callback = rbd_img_obj_parent_read_full_callback; result = rbd_img_request_submit(parent_request); @@ -2319,6 +2327,7 @@ static int rbd_img_obj_parent_read_full(struct rbd_obj_request *obj_request) return 0; parent_request->copyup_pages = NULL; + parent_request->copyup_page_count = 0; parent_request->obj_request = NULL; rbd_obj_request_put(obj_request); out_err: -- cgit v1.2.3 From b91f09f17b2a302f07022e2f766969e2536d71b3 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Fri, 10 May 2013 16:29:22 -0500 Subject: rbd: support reading parent page data for writes Currently, rbd_img_obj_parent_read_full() assumes the incoming object request contains bio data. But if a layered image is part of a multi-layer stack of images it will result in read requests of page data to parent images. This is handling the same kind of issue as was resolved by this commit: 5b2ab72d rbd: support reading parent page data This resolves: http://tracker.ceph.com/issues/5027 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 597b9bbe2fc7..5161e80a38ef 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2165,6 +2165,8 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) u32 page_count; int result; u64 parent_length; + u64 offset; + u64 length; rbd_assert(img_request_child_test(img_request)); @@ -2179,7 +2181,7 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) orig_request = img_request->obj_request; rbd_assert(orig_request != NULL); - rbd_assert(orig_request->type == OBJ_REQUEST_BIO); + rbd_assert(obj_request_type_valid(orig_request->type)); result = img_request->result; parent_length = img_request->length; rbd_assert(parent_length == img_request->xferred); @@ -2211,11 +2213,17 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) /* Then the original write request op */ + offset = orig_request->offset; + length = orig_request->length; osd_req_op_extent_init(osd_req, 1, CEPH_OSD_OP_WRITE, - orig_request->offset, - orig_request->length, 0, 0); - osd_req_op_extent_osd_data_bio(osd_req, 1, orig_request->bio_list, - orig_request->length); + offset, length, 0, 0); + if (orig_request->type == OBJ_REQUEST_BIO) + osd_req_op_extent_osd_data_bio(osd_req, 1, + orig_request->bio_list, length); + else + osd_req_op_extent_osd_data_pages(osd_req, 1, + orig_request->pages, length, + offset & ~PAGE_MASK, false, false); rbd_osd_req_format_write(orig_request); @@ -2261,7 +2269,7 @@ static int rbd_img_obj_parent_read_full(struct rbd_obj_request *obj_request) int result; rbd_assert(obj_request_img_data_test(obj_request)); - rbd_assert(obj_request->type == OBJ_REQUEST_BIO); + rbd_assert(obj_request_type_valid(obj_request->type)); img_request = obj_request->img_request; rbd_assert(img_request != NULL); -- cgit v1.2.3 From 70cf49cfc7a4d1eb4aeea6cd128b88230be9d0b1 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:33 -0500 Subject: rbd: ignore zero-overlap parent An rbd clone image that has an overlap with its parent of 0 is effectively not a layered image at all. Detect this case and treat such an image as non-layered. Issue a warning to be sure the user knows what's going on. This resolves: http://tracker.ceph.com/issues/5028 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 5161e80a38ef..b67ecda1e7ef 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -3665,9 +3665,13 @@ static int rbd_dev_v2_parent_info(struct rbd_device *rbd_dev) ceph_decode_64_safe(&p, end, parent_spec->snap_id, out_err); ceph_decode_64_safe(&p, end, overlap, out_err); - rbd_dev->parent_overlap = overlap; - rbd_dev->parent_spec = parent_spec; - parent_spec = NULL; /* rbd_dev now owns this */ + if (overlap) { + rbd_dev->parent_spec = parent_spec; + parent_spec = NULL; /* rbd_dev now owns this */ + rbd_dev->parent_overlap = overlap; + } else { + rbd_warn(rbd_dev, "ignoring parent of clone with overlap 0\n"); + } out: ret = 0; out_err: -- cgit v1.2.3 From 352a2d5bfc336d980af69cb0ed24f86d9026f377 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Mon, 15 Apr 2013 13:06:54 -0500 Subject: gpio/omap: ensure gpio context is initialised Commit a2797be (gpio/omap: force restore if context loss is not detectable) broke gpio support for OMAP when booting with device-tree because a restore of the gpio context being performed without ever initialising the gpio context. In other words, the context restored was bad. This problem could also occur in the non device-tree case, however, it is much less likely because when booting without device-tree we can detect context loss via a platform specific API and so context restore is performed less often. Nevertheless we should ensure that the gpio context is initialised on the first pm-runtime resume for gpio banks that could lose their state regardless of whether we are booting with device-tree or not. The context loss count was being initialised on the first pm-runtime suspend following a resume, by populating the get_count_loss_count() function pointer after the first pm-runtime resume. To make the code more readable and logical, initialise the context loss count on the first pm-runtime resume if the context is not yet valid. Reported-by: Tony Lindgren Signed-off-by: Jon Hunter Acked-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Tony Lindgren Signed-off-by: Linus Walleij --- drivers/gpio/gpio-omap.c | 48 +++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 45 insertions(+), 3 deletions(-) diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 2050891d9c65..d3f7d2db870f 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -69,6 +69,7 @@ struct gpio_bank { bool is_mpuio; bool dbck_flag; bool loses_context; + bool context_valid; int stride; u32 width; int context_loss_count; @@ -1128,6 +1129,10 @@ static int omap_gpio_probe(struct platform_device *pdev) bank->loses_context = true; } else { bank->loses_context = pdata->loses_context; + + if (bank->loses_context) + bank->get_context_loss_count = + pdata->get_context_loss_count; } @@ -1178,9 +1183,6 @@ static int omap_gpio_probe(struct platform_device *pdev) omap_gpio_chip_init(bank); omap_gpio_show_rev(bank); - if (bank->loses_context) - bank->get_context_loss_count = pdata->get_context_loss_count; - pm_runtime_put(bank->dev); list_add_tail(&bank->node, &omap_gpio_list); @@ -1259,6 +1261,8 @@ update_gpio_context_count: return 0; } +static void omap_gpio_init_context(struct gpio_bank *p); + static int omap_gpio_runtime_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -1268,6 +1272,20 @@ static int omap_gpio_runtime_resume(struct device *dev) int c; spin_lock_irqsave(&bank->lock, flags); + + /* + * On the first resume during the probe, the context has not + * been initialised and so initialise it now. Also initialise + * the context loss count. + */ + if (bank->loses_context && !bank->context_valid) { + omap_gpio_init_context(bank); + + if (bank->get_context_loss_count) + bank->context_loss_count = + bank->get_context_loss_count(bank->dev); + } + _gpio_dbck_enable(bank); /* @@ -1384,6 +1402,29 @@ void omap2_gpio_resume_after_idle(void) } #if defined(CONFIG_PM_RUNTIME) +static void omap_gpio_init_context(struct gpio_bank *p) +{ + struct omap_gpio_reg_offs *regs = p->regs; + void __iomem *base = p->base; + + p->context.ctrl = __raw_readl(base + regs->ctrl); + p->context.oe = __raw_readl(base + regs->direction); + p->context.wake_en = __raw_readl(base + regs->wkup_en); + p->context.leveldetect0 = __raw_readl(base + regs->leveldetect0); + p->context.leveldetect1 = __raw_readl(base + regs->leveldetect1); + p->context.risingdetect = __raw_readl(base + regs->risingdetect); + p->context.fallingdetect = __raw_readl(base + regs->fallingdetect); + p->context.irqenable1 = __raw_readl(base + regs->irqenable); + p->context.irqenable2 = __raw_readl(base + regs->irqenable2); + + if (regs->set_dataout && p->regs->clr_dataout) + p->context.dataout = __raw_readl(base + regs->set_dataout); + else + p->context.dataout = __raw_readl(base + regs->dataout); + + p->context_valid = true; +} + static void omap_gpio_restore_context(struct gpio_bank *bank) { __raw_writel(bank->context.wake_en, @@ -1421,6 +1462,7 @@ static void omap_gpio_restore_context(struct gpio_bank *bank) #else #define omap_gpio_runtime_suspend NULL #define omap_gpio_runtime_resume NULL +static void omap_gpio_init_context(struct gpio_bank *p) {} #endif static const struct dev_pm_ops gpio_pm_ops = { -- cgit v1.2.3 From 6d31727a0b6fe7206725c93508e6d2065f16ff03 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 13 May 2013 19:32:14 +0000 Subject: ARM: Orion: Remove redundant init_dma_coherent_pool_size() The patch: 387870f mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls makes these calls on Kirkwood and Orion5x redundant. The drivers are not making atomic requests for coherent memory and hence the default pool size is now sufficient. Jason Cooper added mach-mvebu/ hunk, and corrected minor typos in commit message. Signed-off-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/common.c | 6 ------ arch/arm/mach-mvebu/armada-370-xp.c | 7 ------- arch/arm/mach-orion5x/common.c | 7 ------- 3 files changed, 20 deletions(-) diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c2cae69e6d2b..f38922897563 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -528,12 +528,6 @@ void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); - /* - * Some Kirkwood devices allocate their coherent buffers from atomic - * context. Increase size of atomic coherent pool to make sure such - * the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); mvebu_mbus_init("marvell,kirkwood-mbus", BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ); diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index 42a4cb3087e2..1c48890bb72b 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -53,13 +53,6 @@ void __init armada_370_xp_init_early(void) { char *mbus_soc_name; - /* - * Some Armada 370/XP devices allocate their coherent buffers - * from atomic context. Increase size of atomic coherent pool - * to make sure such the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); - /* * This initialization will be replaced by a DT-based * initialization once the mvebu-mbus driver gains DT support. diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index b97fd672e89d..f8a6db9239bf 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -199,13 +199,6 @@ void __init orion5x_init_early(void) orion_time_set_base(TIMER_VIRT_BASE); - /* - * Some Orion5x devices allocate their coherent buffers from atomic - * context. Increase size of atomic coherent pool to make sure such - * the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); - /* Initialize the MBUS driver */ orion5x_pcie_id(&dev, &rev); if (dev == MV88F5281_DEV_ID) -- cgit v1.2.3 From ef38079401c03fab7e0eb72085635c841b9b8ee7 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Sat, 11 May 2013 09:15:37 +0000 Subject: qlge: fix dma map leak when the last chunk is not allocated qlge allocates chunks from a page that it maps and unmaps that page when the last chunk is released. When the driver is unloaded or the card is removed, all chunks are released and the page is unmapped for the last chunk. However, when the last chunk of a page is not allocated and the device is removed, that page is not unmapped. In fact, its last reference is not put and there's also a page leak. This bug prevents a device from being properly hotplugged. When the DMA API debug option is enabled, the following messages show the pending DMA allocation after we remove the driver. This patch fixes the bug by unmapping and putting the page from the ring if its last chunk has not been allocated. pci 0005:98:00.0: DMA-API: device driver has pending DMA allocations while released from device [count=1] One of leaked entries details: [device address=0x0000000060a80000] [size=65536 bytes] [mapped with DMA_FROM_DEVICE] [mapped as page] ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:746 Modules linked in: qlge(-) rpadlpar_io rpaphp pci_hotplug fuse [last unloaded: qlge] NIP: c0000000003fc3ec LR: c0000000003fc3e8 CTR: c00000000054de60 REGS: c0000003ee9c74e0 TRAP: 0700 Tainted: G O (3.7.2) MSR: 8000000000029032 CR: 28002424 XER: 00000001 SOFTE: 1 CFAR: c0000000007a39c8 TASK = c0000003ee8d5c90[8406] 'rmmod' THREAD: c0000003ee9c4000 CPU: 31 GPR00: c0000000003fc3e8 c0000003ee9c7760 c000000000c789f8 00000000000000ee GPR04: 0000000000000000 00000000000000ef 0000000000004000 0000000000010000 GPR08: 00000000000000be c000000000b22088 c000000000c4c218 00000000007c0000 GPR12: 0000000028002422 c00000000ff26c80 0000000000000000 000001001b0f1b40 GPR16: 00000000100cb9d8 0000000010093088 c000000000cdf910 0000000000000001 GPR20: 0000000000000000 c000000000dbfc00 0000000000000000 c000000000dbfb80 GPR24: c0000003fafc9d80 0000000000000001 000000000001ff80 c0000003f38f7888 GPR28: c000000000ddfc00 0000000000000400 c000000000bd7790 c000000000ddfb80 NIP [c0000000003fc3ec] .dma_debug_device_change+0x22c/0x2b0 LR [c0000000003fc3e8] .dma_debug_device_change+0x228/0x2b0 Call Trace: [c0000003ee9c7760] [c0000000003fc3e8] .dma_debug_device_change+0x228/0x2b0 (unreliable) [c0000003ee9c7840] [c00000000079a098] .notifier_call_chain+0x78/0xf0 [c0000003ee9c78e0] [c0000000000acc20] .__blocking_notifier_call_chain+0x70/0xb0 [c0000003ee9c7990] [c0000000004a9580] .__device_release_driver+0x100/0x140 [c0000003ee9c7a20] [c0000000004a9708] .driver_detach+0x148/0x150 [c0000003ee9c7ac0] [c0000000004a8144] .bus_remove_driver+0xc4/0x150 [c0000003ee9c7b60] [c0000000004aa58c] .driver_unregister+0x8c/0xe0 [c0000003ee9c7bf0] [c0000000004090b4] .pci_unregister_driver+0x34/0xf0 [c0000003ee9c7ca0] [d000000002231194] .qlge_exit+0x1c/0x34 [qlge] [c0000003ee9c7d20] [c0000000000e36d8] .SyS_delete_module+0x1e8/0x290 [c0000003ee9c7e30] [c0000000000098d4] syscall_exit+0x0/0x94 Instruction dump: 7f26cb78 e818003a e87e81a0 e8f80028 e9180030 796b1f24 78001f24 7d6a5a14 7d2a002a e94b0020 483a7595 60000000 <0fe00000> 2fb80000 40de0048 80120050 ---[ end trace 4294f9abdb01031d ]--- Mapped at: [] .ql_update_lbq+0x384/0x580 [qlge] [] .ql_clean_inbound_rx_ring+0x300/0xc60 [qlge] [] .ql_napi_poll_msix+0x39c/0x5a0 [qlge] [] .net_rx_action+0x170/0x300 [] .__do_softirq+0x170/0x300 Signed-off-by: Thadeu Lima de Souza Cascardo Acked-by: Jitendra Kalsaria Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlge/qlge_main.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c index 87463bc701a6..50235d201592 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c @@ -1106,6 +1106,7 @@ static int ql_get_next_chunk(struct ql_adapter *qdev, struct rx_ring *rx_ring, if (pci_dma_mapping_error(qdev->pdev, map)) { __free_pages(rx_ring->pg_chunk.page, qdev->lbq_buf_order); + rx_ring->pg_chunk.page = NULL; netif_err(qdev, drv, qdev->ndev, "PCI mapping failed.\n"); return -ENOMEM; @@ -2777,6 +2778,12 @@ static void ql_free_lbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring curr_idx = 0; } + if (rx_ring->pg_chunk.page) { + pci_unmap_page(qdev->pdev, rx_ring->pg_chunk.map, + ql_lbq_block_size(qdev), PCI_DMA_FROMDEVICE); + put_page(rx_ring->pg_chunk.page); + rx_ring->pg_chunk.page = NULL; + } } static void ql_free_sbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring) -- cgit v1.2.3 From ba21fc696dd28ea7a5880345faf0168619a478d2 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 13 May 2013 04:26:06 +0000 Subject: bna: add missing iounmap() on error in bnad_init() Add the missing iounmap() before return from bnad_init() in the error handling case. Introduced by commit 01b54b1451853593739816a392485c4e2bee7dda (bna: tx rx cleanup fix). Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bnad.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c index ce4a030d3d0c..07f7ef05c3f2 100644 --- a/drivers/net/ethernet/brocade/bna/bnad.c +++ b/drivers/net/ethernet/brocade/bna/bnad.c @@ -3236,9 +3236,10 @@ bnad_init(struct bnad *bnad, sprintf(bnad->wq_name, "%s_wq_%d", BNAD_NAME, bnad->id); bnad->work_q = create_singlethread_workqueue(bnad->wq_name); - - if (!bnad->work_q) + if (!bnad->work_q) { + iounmap(bnad->bar0); return -ENOMEM; + } return 0; } -- cgit v1.2.3 From 642a25375f4c863607d2170f4471aec8becf7788 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:33 -0500 Subject: rbd: get parent info on refresh Get parent info for format 2 images on every refresh (rather than just during the initial probe). This will be needed to detect the disappearance of the parent image in the event a mapped image becomes unlayered (i.e., flattened). Avoid leaking the previous parent spec on the second and subsequent times this information is requested by dropping the previous one (if any) before updating it. (Also, extract the pool id into a local variable before assigning it into the parent spec.) Switch to using a non-zero parent overlap value rather than the existence of a parent (a non-null parent_spec pointer) to determine whether to mark a request layered. It will soon be possible for a layered image to become unlayered while a request is in flight. This means that the layered flag for an image request indicates that there was a non-zero parent overlap at the time the image request was created. The parent overlap can change thereafter, which may lead to special handling at request submission or completion time. This and the next several patches are related to: http://tracker.ceph.com/issues/3763 NOTE: If an error occurs while refreshing the parent info (i.e., requesting it after initial probe), the old parent info will persist. This is not really correct, and is a scenario that needs to be addressed. For now we'll assert that the failure mode is unlikely, but the issue has been documented in tracker issue 5040. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 67 +++++++++++++++++++++++++++++------------------------ 1 file changed, 37 insertions(+), 30 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index b67ecda1e7ef..fcef63c2c30b 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -1873,7 +1873,7 @@ static struct rbd_img_request *rbd_img_request_create( } if (child_request) img_request_child_set(img_request); - if (rbd_dev->parent_spec) + if (rbd_dev->parent_overlap) img_request_layered_set(img_request); spin_lock_init(&img_request->completion_lock); img_request->next_completion = 0; @@ -3613,6 +3613,7 @@ static int rbd_dev_v2_parent_info(struct rbd_device *rbd_dev) __le64 snapid; void *p; void *end; + u64 pool_id; char *image_id; u64 overlap; int ret; @@ -3643,18 +3644,19 @@ static int rbd_dev_v2_parent_info(struct rbd_device *rbd_dev) p = reply_buf; end = reply_buf + ret; ret = -ERANGE; - ceph_decode_64_safe(&p, end, parent_spec->pool_id, out_err); - if (parent_spec->pool_id == CEPH_NOPOOL) + ceph_decode_64_safe(&p, end, pool_id, out_err); + if (pool_id == CEPH_NOPOOL) goto out; /* No parent? No problem. */ /* The ceph file layout needs to fit pool id in 32 bits */ ret = -EIO; - if (parent_spec->pool_id > (u64)U32_MAX) { + if (pool_id > (u64)U32_MAX) { rbd_warn(NULL, "parent pool id too large (%llu > %u)\n", - (unsigned long long)parent_spec->pool_id, U32_MAX); + (unsigned long long)pool_id, U32_MAX); goto out_err; } + parent_spec->pool_id = pool_id; image_id = ceph_extract_encoded_string(&p, end, NULL, GFP_KERNEL); if (IS_ERR(image_id)) { @@ -3666,6 +3668,7 @@ static int rbd_dev_v2_parent_info(struct rbd_device *rbd_dev) ceph_decode_64_safe(&p, end, overlap, out_err); if (overlap) { + rbd_spec_put(rbd_dev->parent_spec); rbd_dev->parent_spec = parent_spec; parent_spec = NULL; /* rbd_dev now owns this */ rbd_dev->parent_overlap = overlap; @@ -4034,17 +4037,43 @@ static int rbd_dev_v2_header_info(struct rbd_device *rbd_dev) goto out; } + /* + * If the image supports layering, get the parent info. We + * need to probe the first time regardless. Thereafter we + * only need to if there's a parent, to see if it has + * disappeared due to the mapped image getting flattened. + */ + if (rbd_dev->header.features & RBD_FEATURE_LAYERING && + (first_time || rbd_dev->parent_spec)) { + bool warn; + + ret = rbd_dev_v2_parent_info(rbd_dev); + if (ret) + goto out; + + /* + * Print a warning if this is the initial probe and + * the image has a parent. Don't print it if the + * image now being probed is itself a parent. We + * can tell at this point because we won't know its + * pool name yet (just its pool id). + */ + warn = rbd_dev->parent_spec && rbd_dev->spec->pool_name; + if (first_time && warn) + rbd_warn(rbd_dev, "WARNING: kernel layering " + "is EXPERIMENTAL!"); + } + ret = rbd_dev_v2_image_size(rbd_dev); if (ret) goto out; + if (rbd_dev->spec->snap_id == CEPH_NOSNAP) if (rbd_dev->mapping.size != rbd_dev->header.image_size) rbd_dev->mapping.size = rbd_dev->header.image_size; ret = rbd_dev_v2_snap_context(rbd_dev); dout("rbd_dev_v2_snap_context returned %d\n", ret); - if (ret) - goto out; out: up_write(&rbd_dev->header_rwsem); @@ -4498,24 +4527,6 @@ static int rbd_dev_v2_header_onetime(struct rbd_device *rbd_dev) if (ret) goto out_err; - /* If the image supports layering, get the parent info */ - - if (rbd_dev->header.features & RBD_FEATURE_LAYERING) { - ret = rbd_dev_v2_parent_info(rbd_dev); - if (ret) - goto out_err; - /* - * Print a warning if this image has a parent. - * Don't print it if the image now being probed - * is itself a parent. We can tell at this point - * because we won't know its pool name yet (just its - * pool id). - */ - if (rbd_dev->parent_spec && rbd_dev->spec->pool_name) - rbd_warn(rbd_dev, "WARNING: kernel layering " - "is EXPERIMENTAL!"); - } - /* If the image supports fancy striping, get its parameters */ if (rbd_dev->header.features & RBD_FEATURE_STRIPINGV2) { @@ -4527,11 +4538,7 @@ static int rbd_dev_v2_header_onetime(struct rbd_device *rbd_dev) return 0; out_err: - rbd_dev->parent_overlap = 0; - rbd_spec_put(rbd_dev->parent_spec); - rbd_dev->parent_spec = NULL; - kfree(rbd_dev->header_name); - rbd_dev->header_name = NULL; + rbd_dev->header.features = 0; kfree(rbd_dev->header.object_prefix); rbd_dev->header.object_prefix = NULL; -- cgit v1.2.3 From 8785b1d487f0a31afd2c802499786d3b355eccea Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Thu, 9 May 2013 10:08:49 -0500 Subject: rbd: don't release write request until necessary Previously when a layered write was going to involve a copyup request, the original osd request was released before submitting the parent full-object read. The osd request for the copyup would then be allocated in rbd_img_obj_parent_read_full_callback(). Shortly we will be handling the event of mapped layered images getting flattened, and when that occurs we need to resubmit the original request. We therefore don't want to release the osd request until we really konw we're going to replace it--in the callback function. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index fcef63c2c30b..d861c71b4005 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2194,13 +2194,17 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) if (result) goto out_err; - /* Allocate the new copyup osd request for the original request */ - + /* + * The original osd request is of no use to use any more. + * We need a new one that can hold the two ops in a copyup + * request. Allocate the new copyup osd request for the + * original request, and release the old one. + */ result = -ENOMEM; - rbd_assert(!orig_request->osd_req); osd_req = rbd_osd_req_create_copyup(orig_request); if (!osd_req) goto out_err; + rbd_osd_req_destroy(orig_request->osd_req); orig_request->osd_req = osd_req; orig_request->copyup_pages = pages; orig_request->copyup_page_count = page_count; @@ -2276,15 +2280,6 @@ static int rbd_img_obj_parent_read_full(struct rbd_obj_request *obj_request) rbd_dev = img_request->rbd_dev; rbd_assert(rbd_dev->parent != NULL); - /* - * First things first. The original osd request is of no - * use to use any more, we'll need a new one that can hold - * the two ops in a copyup request. We'll get that later, - * but for now we can release the old one. - */ - rbd_osd_req_destroy(obj_request->osd_req); - obj_request->osd_req = NULL; - /* * Determine the byte range covered by the object in the * child image to which the original request was to be sent. -- cgit v1.2.3 From fb65d2284c117cfc28d30217d25a14a8e7a75a94 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Wed, 8 May 2013 22:50:04 -0500 Subject: rbd: define rbd_dev_unparent() Define rbd_dev_unparent() to encapsulate cleaning up parent data structures from a layered rbd image. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index d861c71b4005..9c2b20a88be2 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -1837,6 +1837,17 @@ static void rbd_obj_request_destroy(struct kref *kref) kmem_cache_free(rbd_obj_request_cache, obj_request); } +/* It's OK to call this for a device with no parent */ + +static void rbd_spec_put(struct rbd_spec *spec); +static void rbd_dev_unparent(struct rbd_device *rbd_dev) +{ + rbd_dev_remove_parent(rbd_dev); + rbd_spec_put(rbd_dev->parent_spec); + rbd_dev->parent_spec = NULL; + rbd_dev->parent_overlap = 0; +} + /* * Caller is responsible for filling in the list of object requests * that comprises the image request, and the Linux request pointer @@ -4491,10 +4502,7 @@ static void rbd_dev_unprobe(struct rbd_device *rbd_dev) { struct rbd_image_header *header; - rbd_dev_remove_parent(rbd_dev); - rbd_spec_put(rbd_dev->parent_spec); - rbd_dev->parent_spec = NULL; - rbd_dev->parent_overlap = 0; + rbd_dev_unparent(rbd_dev); /* Free dynamic fields from the header, then zero it out */ @@ -4570,7 +4578,7 @@ static int rbd_dev_probe_parent(struct rbd_device *rbd_dev) return 0; out_err: if (parent) { - rbd_spec_put(rbd_dev->parent_spec); + rbd_dev_unparent(rbd_dev); kfree(rbd_dev->header_name); rbd_dev_destroy(parent); } else { -- cgit v1.2.3 From e93f3152357ca75284284bef8eeea7d45fe1bab1 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Wed, 8 May 2013 22:50:04 -0500 Subject: rbd: define parent image request routines Define rbd_parent_request_create() and rbd_parent_request_destroy() to handle the creation of parent image requests submitted for layered image objects. For simplicity, let rbd_img_request_put() handle dropping the reference to any image request (parent or not), and call whichever destructor is appropriate on the last put. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 78 +++++++++++++++++++++++++++++++++++++---------------- 1 file changed, 55 insertions(+), 23 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 9c2b20a88be2..1ffdfbfbf3c4 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -1359,13 +1359,18 @@ static void rbd_obj_request_put(struct rbd_obj_request *obj_request) kref_put(&obj_request->kref, rbd_obj_request_destroy); } +static bool img_request_child_test(struct rbd_img_request *img_request); +static void rbd_parent_request_destroy(struct kref *kref); static void rbd_img_request_destroy(struct kref *kref); static void rbd_img_request_put(struct rbd_img_request *img_request) { rbd_assert(img_request != NULL); dout("%s: img %p (was %d)\n", __func__, img_request, atomic_read(&img_request->kref.refcount)); - kref_put(&img_request->kref, rbd_img_request_destroy); + if (img_request_child_test(img_request)) + kref_put(&img_request->kref, rbd_parent_request_destroy); + else + kref_put(&img_request->kref, rbd_img_request_destroy); } static inline void rbd_img_obj_request_add(struct rbd_img_request *img_request, @@ -1482,6 +1487,12 @@ static void img_request_child_set(struct rbd_img_request *img_request) smp_mb(); } +static void img_request_child_clear(struct rbd_img_request *img_request) +{ + clear_bit(IMG_REQ_CHILD, &img_request->flags); + smp_mb(); +} + static bool img_request_child_test(struct rbd_img_request *img_request) { smp_mb(); @@ -1856,8 +1867,7 @@ static void rbd_dev_unparent(struct rbd_device *rbd_dev) static struct rbd_img_request *rbd_img_request_create( struct rbd_device *rbd_dev, u64 offset, u64 length, - bool write_request, - bool child_request) + bool write_request) { struct rbd_img_request *img_request; @@ -1882,8 +1892,6 @@ static struct rbd_img_request *rbd_img_request_create( } else { img_request->snap_id = rbd_dev->spec->snap_id; } - if (child_request) - img_request_child_set(img_request); if (rbd_dev->parent_overlap) img_request_layered_set(img_request); spin_lock_init(&img_request->completion_lock); @@ -1918,12 +1926,46 @@ static void rbd_img_request_destroy(struct kref *kref) if (img_request_write_test(img_request)) ceph_put_snap_context(img_request->snapc); - if (img_request_child_test(img_request)) - rbd_obj_request_put(img_request->obj_request); - kmem_cache_free(rbd_img_request_cache, img_request); } +static struct rbd_img_request *rbd_parent_request_create( + struct rbd_obj_request *obj_request, + u64 img_offset, u64 length) +{ + struct rbd_img_request *parent_request; + struct rbd_device *rbd_dev; + + rbd_assert(obj_request->img_request); + rbd_dev = obj_request->img_request->rbd_dev; + + parent_request = rbd_img_request_create(rbd_dev->parent, + img_offset, length, false); + if (!parent_request) + return NULL; + + img_request_child_set(parent_request); + rbd_obj_request_get(obj_request); + parent_request->obj_request = obj_request; + + return parent_request; +} + +static void rbd_parent_request_destroy(struct kref *kref) +{ + struct rbd_img_request *parent_request; + struct rbd_obj_request *orig_request; + + parent_request = container_of(kref, struct rbd_img_request, kref); + orig_request = parent_request->obj_request; + + parent_request->obj_request = NULL; + rbd_obj_request_put(orig_request); + img_request_child_clear(parent_request); + + rbd_img_request_destroy(kref); +} + static bool rbd_img_obj_end_request(struct rbd_obj_request *obj_request) { struct rbd_img_request *img_request; @@ -2321,13 +2363,10 @@ static int rbd_img_obj_parent_read_full(struct rbd_obj_request *obj_request) } result = -ENOMEM; - parent_request = rbd_img_request_create(rbd_dev->parent, - img_offset, length, - false, true); + parent_request = rbd_parent_request_create(obj_request, + img_offset, length); if (!parent_request) goto out_err; - rbd_obj_request_get(obj_request); - parent_request->obj_request = obj_request; result = rbd_img_request_fill(parent_request, OBJ_REQUEST_PAGES, pages); if (result) @@ -2580,7 +2619,6 @@ out: static void rbd_img_parent_read(struct rbd_obj_request *obj_request) { - struct rbd_device *rbd_dev; struct rbd_img_request *img_request; int result; @@ -2589,20 +2627,14 @@ static void rbd_img_parent_read(struct rbd_obj_request *obj_request) rbd_assert(obj_request->result == (s32) -ENOENT); rbd_assert(obj_request_type_valid(obj_request->type)); - rbd_dev = obj_request->img_request->rbd_dev; - rbd_assert(rbd_dev->parent != NULL); /* rbd_read_finish(obj_request, obj_request->length); */ - img_request = rbd_img_request_create(rbd_dev->parent, + img_request = rbd_parent_request_create(obj_request, obj_request->img_offset, - obj_request->length, - false, true); + obj_request->length); result = -ENOMEM; if (!img_request) goto out_err; - rbd_obj_request_get(obj_request); - img_request->obj_request = obj_request; - if (obj_request->type == OBJ_REQUEST_BIO) result = rbd_img_request_fill(img_request, OBJ_REQUEST_BIO, obj_request->bio_list); @@ -2913,7 +2945,7 @@ static void rbd_request_fn(struct request_queue *q) result = -ENOMEM; img_request = rbd_img_request_create(rbd_dev, offset, length, - write_request, false); + write_request); if (!img_request) goto end_request; -- cgit v1.2.3 From a2acd00e7964dbb1668a5956c9d0a4bdeb838c4a Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Wed, 8 May 2013 22:50:04 -0500 Subject: rbd: reference count parent requests Keep a reference count for uses of the parent information for an rbd device. An initial reference is set in rbd_img_request_create() if the target image has a parent (with non-zero overlap). Each image request for an image with a non-zero parent overlap gets another reference when it's created, and that reference is dropped when the request is destroyed. The initial reference is dropped when the image gets torn down. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 104 +++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 102 insertions(+), 2 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 1ffdfbfbf3c4..8b6091b6d5cb 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -55,6 +55,39 @@ #define SECTOR_SHIFT 9 #define SECTOR_SIZE (1ULL << SECTOR_SHIFT) +/* + * Increment the given counter and return its updated value. + * If the counter is already 0 it will not be incremented. + * If the counter is already at its maximum value returns + * -EINVAL without updating it. + */ +static int atomic_inc_return_safe(atomic_t *v) +{ + unsigned int counter; + + counter = (unsigned int)__atomic_add_unless(v, 1, 0); + if (counter <= (unsigned int)INT_MAX) + return (int)counter; + + atomic_dec(v); + + return -EINVAL; +} + +/* Decrement the counter. Return the resulting value, or -EINVAL */ +static int atomic_dec_return_safe(atomic_t *v) +{ + int counter; + + counter = atomic_dec_return(v); + if (counter >= 0) + return counter; + + atomic_inc(v); + + return -EINVAL; +} + #define RBD_DRV_NAME "rbd" #define RBD_DRV_NAME_LONG "rbd (rados block device)" @@ -312,6 +345,7 @@ struct rbd_device { struct rbd_spec *parent_spec; u64 parent_overlap; + atomic_t parent_ref; struct rbd_device *parent; /* protects updating the header */ @@ -361,6 +395,7 @@ static ssize_t rbd_add(struct bus_type *bus, const char *buf, static ssize_t rbd_remove(struct bus_type *bus, const char *buf, size_t count); static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool mapping); +static void rbd_spec_put(struct rbd_spec *spec); static struct bus_attribute rbd_bus_attrs[] = { __ATTR(add, S_IWUSR, NULL, rbd_add), @@ -1505,6 +1540,12 @@ static void img_request_layered_set(struct rbd_img_request *img_request) smp_mb(); } +static void img_request_layered_clear(struct rbd_img_request *img_request) +{ + clear_bit(IMG_REQ_LAYERED, &img_request->flags); + smp_mb(); +} + static bool img_request_layered_test(struct rbd_img_request *img_request) { smp_mb(); @@ -1859,6 +1900,58 @@ static void rbd_dev_unparent(struct rbd_device *rbd_dev) rbd_dev->parent_overlap = 0; } +/* + * Parent image reference counting is used to determine when an + * image's parent fields can be safely torn down--after there are no + * more in-flight requests to the parent image. When the last + * reference is dropped, cleaning them up is safe. + */ +static void rbd_dev_parent_put(struct rbd_device *rbd_dev) +{ + int counter; + + if (!rbd_dev->parent_spec) + return; + + counter = atomic_dec_return_safe(&rbd_dev->parent_ref); + if (counter > 0) + return; + + /* Last reference; clean up parent data structures */ + + if (!counter) + rbd_dev_unparent(rbd_dev); + else + rbd_warn(rbd_dev, "parent reference underflow\n"); +} + +/* + * If an image has a non-zero parent overlap, get a reference to its + * parent. + * + * Returns true if the rbd device has a parent with a non-zero + * overlap and a reference for it was successfully taken, or + * false otherwise. + */ +static bool rbd_dev_parent_get(struct rbd_device *rbd_dev) +{ + int counter; + + if (!rbd_dev->parent_spec) + return false; + + counter = atomic_inc_return_safe(&rbd_dev->parent_ref); + if (counter > 0 && rbd_dev->parent_overlap) + return true; + + /* Image was flattened, but parent is not yet torn down */ + + if (counter < 0) + rbd_warn(rbd_dev, "parent reference overflow\n"); + + return false; +} + /* * Caller is responsible for filling in the list of object requests * that comprises the image request, and the Linux request pointer @@ -1892,7 +1985,7 @@ static struct rbd_img_request *rbd_img_request_create( } else { img_request->snap_id = rbd_dev->spec->snap_id; } - if (rbd_dev->parent_overlap) + if (rbd_dev_parent_get(rbd_dev)) img_request_layered_set(img_request); spin_lock_init(&img_request->completion_lock); img_request->next_completion = 0; @@ -1923,6 +2016,11 @@ static void rbd_img_request_destroy(struct kref *kref) rbd_img_obj_request_del(img_request, obj_request); rbd_assert(img_request->obj_request_count == 0); + if (img_request_layered_test(img_request)) { + img_request_layered_clear(img_request); + rbd_dev_parent_put(img_request->rbd_dev); + } + if (img_request_write_test(img_request)) ceph_put_snap_context(img_request->snapc); @@ -3502,6 +3600,7 @@ static struct rbd_device *rbd_dev_create(struct rbd_client *rbdc, spin_lock_init(&rbd_dev->lock); rbd_dev->flags = 0; + atomic_set(&rbd_dev->parent_ref, 0); INIT_LIST_HEAD(&rbd_dev->node); init_rwsem(&rbd_dev->header_rwsem); @@ -4534,7 +4633,7 @@ static void rbd_dev_unprobe(struct rbd_device *rbd_dev) { struct rbd_image_header *header; - rbd_dev_unparent(rbd_dev); + rbd_dev_parent_put(rbd_dev); /* Free dynamic fields from the header, then zero it out */ @@ -4606,6 +4705,7 @@ static int rbd_dev_probe_parent(struct rbd_device *rbd_dev) if (ret < 0) goto out_err; rbd_dev->parent = parent; + atomic_set(&rbd_dev->parent_ref, 1); return 0; out_err: -- cgit v1.2.3 From 392a9dad7e777296fe79d97a6b3acd735ad2eb5f Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:33 -0500 Subject: rbd: detect when clone image is flattened A format 2 clone image can be the subject of a "flatten" operation, during which all of its data gets "copied up" from its parent image, leaving the image fully populated. Once this is complete, the clone's association with the parent is abolished. Since this can occur when a clone is mapped, we need to detect when it has occurred and handle it accordingly. We know an image has been flattened when we know it at one time had a parent, but we have learned (via a "get_parent" object class method call) it no longer has one. There might be in-flight requests at the point we learn an image has been flattened, so we can't simply clean up parent data structures right away. Instead, we'll drop the initial parent reference when the parent has disappeared (rather than when the image gets destroyed), which will allow the last in-flight reference to clean things up when it's complete. We leverage the fact that a zero parent overlap renders an image effectively unlayered. We set the overlap to 0 at the point we detect the clone image has flattened, which allows the unlayered behavior to take effect immediately, while keeping other parent structures in place until in-flight requests to complete. This and the next few patches resolve: http://tracker.ceph.com/issues/3763 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 30 ++++++++++++++++++++++++++++-- 1 file changed, 28 insertions(+), 2 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 8b6091b6d5cb..9717e20f3477 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -1929,6 +1929,11 @@ static void rbd_dev_parent_put(struct rbd_device *rbd_dev) * If an image has a non-zero parent overlap, get a reference to its * parent. * + * We must get the reference before checking for the overlap to + * coordinate properly with zeroing the parent overlap in + * rbd_dev_v2_parent_info() when an image gets flattened. We + * drop it again if there is no overlap. + * * Returns true if the rbd device has a parent with a non-zero * overlap and a reference for it was successfully taken, or * false otherwise. @@ -3782,8 +3787,26 @@ static int rbd_dev_v2_parent_info(struct rbd_device *rbd_dev) end = reply_buf + ret; ret = -ERANGE; ceph_decode_64_safe(&p, end, pool_id, out_err); - if (pool_id == CEPH_NOPOOL) + if (pool_id == CEPH_NOPOOL) { + /* + * Either the parent never existed, or we have + * record of it but the image got flattened so it no + * longer has a parent. When the parent of a + * layered image disappears we immediately set the + * overlap to 0. The effect of this is that all new + * requests will be treated as if the image had no + * parent. + */ + if (rbd_dev->parent_overlap) { + rbd_dev->parent_overlap = 0; + smp_mb(); + rbd_dev_parent_put(rbd_dev); + pr_info("%s: clone image has been flattened\n", + rbd_dev->disk->disk_name); + } + goto out; /* No parent? No problem. */ + } /* The ceph file layout needs to fit pool id in 32 bits */ @@ -4633,7 +4656,10 @@ static void rbd_dev_unprobe(struct rbd_device *rbd_dev) { struct rbd_image_header *header; - rbd_dev_parent_put(rbd_dev); + /* Drop parent reference unless it's already been done (or none) */ + + if (rbd_dev->parent_overlap) + rbd_dev_parent_put(rbd_dev); /* Free dynamic fields from the header, then zero it out */ -- cgit v1.2.3 From 02c74fbad9d4a5149756eb35be7300736e4904e9 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:33 -0500 Subject: rbd: re-submit read request for flattened clone If a clone image gets flattened while a parent read request is underway, the original rbd object request needs to be resubmitted. The reason is that by the time we get the response to the parent read request, the data read from the parent may be out of date. In other words, we could see this sequence of events: rbd client parent image/osd ---------- ---------------- original object ENOENT; issue parent read respond to parent read child image flattened original image header refresh <--- original object written independently here parent read response received Add code to rbd_img_parent_read_callback() to detect when a clone's parent image has disappeared (as evidenced by its parent overlap becoming 0), and re-submit the original read request in that case. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 30 +++++++++++++++++++++++++----- 1 file changed, 25 insertions(+), 5 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 9717e20f3477..4edcb6d85f01 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2682,14 +2682,36 @@ static void rbd_img_parent_read_callback(struct rbd_img_request *img_request) struct rbd_obj_request *obj_request; struct rbd_device *rbd_dev; u64 obj_end; + u64 img_xferred; + int img_result; rbd_assert(img_request_child_test(img_request)); + /* First get what we need from the image request and release it */ + obj_request = img_request->obj_request; + img_xferred = img_request->xferred; + img_result = img_request->result; + rbd_img_request_put(img_request); + + /* + * If the overlap has become 0 (most likely because the + * image has been flattened) we need to re-submit the + * original request. + */ rbd_assert(obj_request); rbd_assert(obj_request->img_request); + rbd_dev = obj_request->img_request->rbd_dev; + if (!rbd_dev->parent_overlap) { + struct ceph_osd_client *osdc; + + osdc = &rbd_dev->rbd_client->client->osdc; + img_result = rbd_obj_request_submit(osdc, obj_request); + if (!img_result) + return; + } - obj_request->result = img_request->result; + obj_request->result = img_result; if (obj_request->result) goto out; @@ -2702,7 +2724,6 @@ static void rbd_img_parent_read_callback(struct rbd_img_request *img_request) */ rbd_assert(obj_request->img_offset < U64_MAX - obj_request->length); obj_end = obj_request->img_offset + obj_request->length; - rbd_dev = obj_request->img_request->rbd_dev; if (obj_end > rbd_dev->parent_overlap) { u64 xferred = 0; @@ -2710,12 +2731,11 @@ static void rbd_img_parent_read_callback(struct rbd_img_request *img_request) xferred = rbd_dev->parent_overlap - obj_request->img_offset; - obj_request->xferred = min(img_request->xferred, xferred); + obj_request->xferred = min(img_xferred, xferred); } else { - obj_request->xferred = img_request->xferred; + obj_request->xferred = img_xferred; } out: - rbd_img_request_put(img_request); rbd_img_obj_request_read_callback(obj_request); rbd_obj_request_complete(obj_request); } -- cgit v1.2.3 From bbea1c1a31b1128d34b2b5b4f28276969cce14e9 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:33 -0500 Subject: rbd: re-submit write request for flattened clone Add code to rbd_img_parent_read_full_callback() to detect when a clone's parent image has disappeared, and re-submit the original write request in that case. (See the previous commit for more reasoning about why this is appropriate.) Rename some variables in rbd_img_obj_parent_read_full_callback() to match the convention used in the previous patch. Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 29 ++++++++++++++++++++++------- 1 file changed, 22 insertions(+), 7 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 4edcb6d85f01..5c2731859e8a 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2319,7 +2319,7 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) struct rbd_device *rbd_dev; struct page **pages; u32 page_count; - int result; + int img_result; u64 parent_length; u64 offset; u64 length; @@ -2338,7 +2338,7 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) orig_request = img_request->obj_request; rbd_assert(orig_request != NULL); rbd_assert(obj_request_type_valid(orig_request->type)); - result = img_request->result; + img_result = img_request->result; parent_length = img_request->length; rbd_assert(parent_length == img_request->xferred); rbd_img_request_put(img_request); @@ -2347,7 +2347,22 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) rbd_dev = orig_request->img_request->rbd_dev; rbd_assert(rbd_dev); - if (result) + /* + * If the overlap has become 0 (most likely because the + * image has been flattened) we need to free the pages + * and re-submit the original write request. + */ + if (!rbd_dev->parent_overlap) { + struct ceph_osd_client *osdc; + + ceph_release_page_vector(pages, page_count); + osdc = &rbd_dev->rbd_client->client->osdc; + img_result = rbd_obj_request_submit(osdc, orig_request); + if (!img_result) + return; + } + + if (img_result) goto out_err; /* @@ -2356,7 +2371,7 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) * request. Allocate the new copyup osd request for the * original request, and release the old one. */ - result = -ENOMEM; + img_result = -ENOMEM; osd_req = rbd_osd_req_create_copyup(orig_request); if (!osd_req) goto out_err; @@ -2391,13 +2406,13 @@ rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) orig_request->callback = rbd_img_obj_copyup_callback; osdc = &rbd_dev->rbd_client->client->osdc; - result = rbd_obj_request_submit(osdc, orig_request); - if (!result) + img_result = rbd_obj_request_submit(osdc, orig_request); + if (!img_result) return; out_err: /* Record the error code and complete the request */ - orig_request->result = result; + orig_request->result = img_result; orig_request->xferred = 0; obj_request_done_set(orig_request); rbd_obj_request_complete(orig_request); -- cgit v1.2.3 From 638f5abed3f7d8a7fc24087bd760fa3d99f68a39 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 6 May 2013 17:40:33 -0500 Subject: rbd: re-submit flattened write request (part 2) Add code to rbd_img_obj_exists_callback() to detect when a clone's parent image has disappeared, and re-submit the original write request in that case. Kill off some redundant assertions. This completes the resolution for: http://tracker.ceph.com/issues/3763 Signed-off-by: Alex Elder Reviewed-by: Josh Durgin --- drivers/block/rbd.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 5c2731859e8a..6b872f219774 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -2516,6 +2516,7 @@ out_err: static void rbd_img_obj_exists_callback(struct rbd_obj_request *obj_request) { struct rbd_obj_request *orig_request; + struct rbd_device *rbd_dev; int result; rbd_assert(!obj_request_img_data_test(obj_request)); @@ -2538,8 +2539,21 @@ static void rbd_img_obj_exists_callback(struct rbd_obj_request *obj_request) obj_request->xferred, obj_request->length); rbd_obj_request_put(obj_request); - rbd_assert(orig_request); - rbd_assert(orig_request->img_request); + /* + * If the overlap has become 0 (most likely because the + * image has been flattened) we need to free the pages + * and re-submit the original write request. + */ + rbd_dev = orig_request->img_request->rbd_dev; + if (!rbd_dev->parent_overlap) { + struct ceph_osd_client *osdc; + + rbd_obj_request_put(orig_request); + osdc = &rbd_dev->rbd_client->client->osdc; + result = rbd_obj_request_submit(osdc, orig_request); + if (!result) + return; + } /* * Our only purpose here is to determine whether the object -- cgit v1.2.3 From 6880b0150a7c25fd75c5ece80abc49ebf53c38c1 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 11 May 2013 19:04:09 +0000 Subject: parisc: make default cross compiler search more robust (v3) People/distros vary how they prefix the toolchain name for 64bit builds. Rather than enforce one convention over another, add a for loop which does a search for all the general prefixes. For 64bit builds, we now search for (in order): hppa64-unknown-linux-gnu hppa64-linux-gnu hppa64-linux For 32bit builds, we look for: hppa-unknown-linux-gnu hppa-linux-gnu hppa-linux hppa2.0-unknown-linux-gnu hppa2.0-linux-gnu hppa2.0-linux hppa1.1-unknown-linux-gnu hppa1.1-linux-gnu hppa1.1-linux This patch was initiated by Mike Frysinger, with feedback from Jeroen Roovers, John David Anglin and Helge Deller. Signed-off-by: Mike Frysinger Signed-off-by: Jeroen Roovers Signed-off-by: John David Anglin Signed-off-by: Helge Deller --- arch/parisc/Makefile | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 2f967cc6649e..197690068f88 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -23,24 +23,21 @@ NM = sh $(srctree)/arch/parisc/nm CHECKFLAGS += -D__hppa__=1 LIBGCC = $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) -MACHINE := $(shell uname -m) -NATIVE := $(if $(filter parisc%,$(MACHINE)),1,0) - ifdef CONFIG_64BIT UTS_MACHINE := parisc64 CHECKFLAGS += -D__LP64__=1 -m64 -WIDTH := 64 +CC_ARCHES = hppa64 else # 32-bit -WIDTH := +CC_ARCHES = hppa hppa2.0 hppa1.1 endif -# attempt to help out folks who are cross-compiling -ifeq ($(NATIVE),1) -CROSS_COMPILE := hppa$(WIDTH)-linux- -else - ifeq ($(CROSS_COMPILE),) - CROSS_COMPILE := hppa$(WIDTH)-linux-gnu- - endif +ifneq ($(SUBARCH),$(UTS_MACHINE)) + ifeq ($(CROSS_COMPILE),) + CC_SUFFIXES = linux linux-gnu unknown-linux-gnu + CROSS_COMPILE := $(call cc-cross-prefix, \ + $(foreach a,$(CC_ARCHES), \ + $(foreach s,$(CC_SUFFIXES),$(a)-$(s)-))) + endif endif OBJCOPY_FLAGS =-O binary -R .note -R .comment -S -- cgit v1.2.3 From d6ffe1b8ecc59ae23524e408063dc7725f485f96 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Mon, 13 May 2013 22:13:59 +0200 Subject: avr32: move NODES_SHIFT into Kconfig and delete numnodes.h This patch moves the NODES_SHIFT symbol into Kconfig to synchronize AVR32 architecture with the current kernel. The global header files do longer use the value from numnodes.h. See commit c80d79d746cc48bd94b0ce4f6d4f3c90cd403aaf for details. Signed-off-by: Paul Bolle Signed-off-by: Hans-Christian Egtvedt --- arch/avr32/Kconfig | 5 +++++ arch/avr32/include/asm/numnodes.h | 7 ------- 2 files changed, 5 insertions(+), 7 deletions(-) delete mode 100644 arch/avr32/include/asm/numnodes.h diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 22c40308360b..ba4d40569f9e 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -208,6 +208,11 @@ config ARCH_DISCONTIGMEM_ENABLE config ARCH_SPARSEMEM_ENABLE def_bool n +config NODES_SHIFT + int + default "2" + depends on NEED_MULTIPLE_NODES + source "mm/Kconfig" config OWNERSHIP_TRACE diff --git a/arch/avr32/include/asm/numnodes.h b/arch/avr32/include/asm/numnodes.h deleted file mode 100644 index 0b864d7ce330..000000000000 --- a/arch/avr32/include/asm/numnodes.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_AVR32_NUMNODES_H -#define __ASM_AVR32_NUMNODES_H - -/* Max 4 nodes */ -#define NODES_SHIFT 2 - -#endif /* __ASM_AVR32_NUMNODES_H */ -- cgit v1.2.3 From e68c636d88db3fda74e664ecb1a213ae0d50a7d8 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Mon, 13 May 2013 22:22:10 +0200 Subject: avr32: fix relocation check for signed 18-bit offset Caught by static code analysis by David. Reported-by: David Binderman Signed-off-by: Hans-Christian Egtvedt Cc: stable@kernel.org --- arch/avr32/kernel/module.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c index 596f7305d93f..2c9412908024 100644 --- a/arch/avr32/kernel/module.c +++ b/arch/avr32/kernel/module.c @@ -264,7 +264,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, break; case R_AVR32_GOT18SW: if ((relocation & 0xfffe0003) != 0 - && (relocation & 0xfffc0003) != 0xffff0000) + && (relocation & 0xfffc0000) != 0xfffc0000) return reloc_overflow(module, "R_AVR32_GOT18SW", relocation); relocation >>= 2; -- cgit v1.2.3 From 1581a03573e6c9ebd931e31f9172cce25dcb69e6 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Wed, 24 Apr 2013 11:26:14 -0700 Subject: staging: comedi: ni_labpc: fix build when VIRT_TO_BUS is not defined After merging the final tree, the next-20130424 build (powerpc allyesconfig) failed like this: drivers/staging/comedi/drivers/ni_labpc.c: In function 'labpc_ai_cmd': drivers/staging/comedi/drivers/ni_labpc.c:980:9: error: implicit declaration of function 'virt_to_bus' [-Werror=implicit-function-declaration] The virt_to_bus() is only needed for the ISA DMA support in this driver. On powerpc, CONFIG_COMEDI_NI_LABPC_ISA cannot be enabled due to the depends on VIRT_TO_BUS but the PCI driver, ni_labpc_pci, can be enabled. That driver uses the ni_labpc driver for the common support code shared by the ISA, PCI, and PCMCIA boards. The ISA specific support, and the optional ISA DMA support, are currently still in the common ni_labpc driver. The ISA specific code is protected by #if IS_ENABLED(CONFIG_COMEDI_NI_LABPC_ISA) and the ISA DMA support is protected by #ifdef CONFIG_ISA_DMA_API. This allows the ISA support to be enabled on architectures that support VIRT_TO_BUS and optionally enables ISA DMA support if ISA_DMA_API is enabled. Unfortunately, the ISA DMA code uses virt_to_bus(). This results in the build failure for architectures that enable ISA_DMA_API but do not have VIRT_TO_BUS. Add a new member to the private data, dma_addr, to hold the phys_addr_t returned by virt_to_bus() and initialize it in the ISA specific labpc_attach(). For architectures that enable ISA_DMA_API but not VIRT_TO_BUS, this will fix the build error. This is also safe for architectures the enable both options but don't enable COMEDI_NI_LABPC_ISA because the dma channel (devpriv->dma_chan) is only initialized in the ISA specific labpc_attach(). Signed-off-by: H Hartley Sweeten Reported-by: Stephen Rothwell Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_labpc.c | 8 +++++--- drivers/staging/comedi/drivers/ni_labpc.h | 1 + 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c index 3d978f34d212..77a7bb632580 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.c +++ b/drivers/staging/comedi/drivers/ni_labpc.c @@ -976,8 +976,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) /* clear flip-flop to make sure 2-byte registers for * count and address get set correctly */ clear_dma_ff(devpriv->dma_chan); - set_dma_addr(devpriv->dma_chan, - virt_to_bus(devpriv->dma_buffer)); + set_dma_addr(devpriv->dma_chan, devpriv->dma_addr); /* set appropriate size of transfer */ devpriv->dma_transfer_size = labpc_suggest_transfer_size(cmd); if (cmd->stop_src == TRIG_COUNT && @@ -1089,7 +1088,7 @@ static void labpc_drain_dma(struct comedi_device *dev) devpriv->count -= num_points; /* set address and count for next transfer */ - set_dma_addr(devpriv->dma_chan, virt_to_bus(devpriv->dma_buffer)); + set_dma_addr(devpriv->dma_chan, devpriv->dma_addr); set_dma_count(devpriv->dma_chan, leftover * sample_size); release_dma_lock(flags); @@ -1741,6 +1740,9 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it) unsigned long dma_flags; devpriv->dma_chan = dma_chan; + devpriv->dma_addr = + virt_to_bus(devpriv->dma_buffer); + dma_flags = claim_dma_lock(); disable_dma(devpriv->dma_chan); set_dma_mode(devpriv->dma_chan, DMA_MODE_READ); diff --git a/drivers/staging/comedi/drivers/ni_labpc.h b/drivers/staging/comedi/drivers/ni_labpc.h index 615f16f271c0..4b691f5a9965 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.h +++ b/drivers/staging/comedi/drivers/ni_labpc.h @@ -82,6 +82,7 @@ struct labpc_private { unsigned int divisor_b1; unsigned int dma_chan; /* dma channel to use */ u16 *dma_buffer; /* buffer ai will dma into */ + phys_addr_t dma_addr; /* transfer size in bytes for current transfer */ unsigned int dma_transfer_size; /* we are using dma/fifo-half-full/etc. */ -- cgit v1.2.3 From b3fab427739c76871c96834e72c369dd0e502d4b Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Fri, 10 May 2013 14:08:28 +0100 Subject: staging: comedi: allow buffer resize if previous resize failed When a comedi device is successfully attached, those subdevices that support asynchronous commands will have had buffers allocated successfully. It is possible to resize the buffers afterwards, but if the resize fails the subdevice is left with no buffer (`s->async->prealloc_buf == NULL`). Currently, this also causes any subsequent attempts to resize the buffer to fail with an error, which seems like a bad idea. Remove the check in `resize_async_buffer()` that causes the resize to fail if the subdevice currently has no buffer (presumably due to the failure of a previous resize attempt). Callers of `resize_async_buffer()` have already checked that the subdevice is allowed to have a buffer. Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/comedi_fops.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index 00f2547024ec..924c54c9c31f 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -246,9 +246,6 @@ static int resize_async_buffer(struct comedi_device *dev, return -EBUSY; } - if (!async->prealloc_buf) - return -EINVAL; - /* make sure buffer is an integral number of pages * (we round up) */ new_size = (new_size + PAGE_SIZE - 1) & PAGE_MASK; -- cgit v1.2.3 From 4efc4bbdc1602d887d784be629a7a4efbf6b6e19 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Fri, 10 May 2013 14:07:15 +0100 Subject: staging: comedi: work without HAS_DMA The core "comedi" module and the "mite" helper module for NI PCI devices both have calls to `dma_alloc_coherent()` and `dma_free_coherent()`. Those functions are only available if `CONFIG_HAS_DMA` is defined. Apart from the "mite" module, the functions are only called for comedi drivers that set `s->async_dma_dir` (where `s` is a pointer to a `struct comedi_subdevice`) to anything other than `DMA_NONE`. Change local helper functions `__comedi_buf_alloc()` and `__comedi_buf_free()` to only call `dma_alloc_coherent()` and `dma_free_coherent()` if `CONFIG_HAS_DMA` is defined. Change the "Kconfig" to make the following configuration options depend on `HAS_DMA`: `COMEDI_MITE` - builds the "mite" module. `COMEDI_NI_6527` - selects `COMEDI_MITE`. `COMEDI_NI_65XX` - selects `COMEDI_MITE`. `COMEDI_NI_670X` - selects `COMEDI_MITE`. `COMEDI_NI_LABPC_PCI` - selects `COMEDI_MITE`. `COMEDI_NI_PCIDIO` - selects `COMEDI_MITE`. `COMEDI_NI_TIOCMD` - selects `COMEDI_MITE`. `COMEDI_NI_660X` - selects `COMEDI_NI_TIOCMD`, sets `s->async_dma_dir`. `COMEDI_NI_PCIMIO` - selects `COMEDI_NI_TIOCMD`, sets `s->async_dma_dir`. Signed-off-by: Ian Abbott Reviewed-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/Kconfig | 9 +++++++++ drivers/staging/comedi/comedi_buf.c | 6 ++++++ 2 files changed, 15 insertions(+) diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index 7871579bb83d..87e852a0ef49 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -981,6 +981,7 @@ config COMEDI_ME_DAQ config COMEDI_NI_6527 tristate "NI 6527 support" + depends on HAS_DMA select COMEDI_MITE ---help--- Enable support for the National Instruments 6527 PCI card @@ -990,6 +991,7 @@ config COMEDI_NI_6527 config COMEDI_NI_65XX tristate "NI 65xx static dio PCI card support" + depends on HAS_DMA select COMEDI_MITE ---help--- Enable support for National Instruments 65xx static dio boards. @@ -1003,6 +1005,7 @@ config COMEDI_NI_65XX config COMEDI_NI_660X tristate "NI 660x counter/timer PCI card support" + depends on HAS_DMA select COMEDI_NI_TIOCMD ---help--- Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602, @@ -1013,6 +1016,7 @@ config COMEDI_NI_660X config COMEDI_NI_670X tristate "NI 670x PCI card support" + depends on HAS_DMA select COMEDI_MITE ---help--- Enable support for National Instruments PCI-6703 and PCI-6704 @@ -1022,6 +1026,7 @@ config COMEDI_NI_670X config COMEDI_NI_LABPC_PCI tristate "NI Lab-PC PCI-1200 support" + depends on HAS_DMA select COMEDI_NI_LABPC select COMEDI_MITE ---help--- @@ -1032,6 +1037,7 @@ config COMEDI_NI_LABPC_PCI config COMEDI_NI_PCIDIO tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support" + depends on HAS_DMA select COMEDI_MITE select COMEDI_8255 ---help--- @@ -1043,6 +1049,7 @@ config COMEDI_NI_PCIDIO config COMEDI_NI_PCIMIO tristate "NI PCI-MIO-E series and M series support" + depends on HAS_DMA select COMEDI_NI_TIOCMD select COMEDI_8255 select COMEDI_FC @@ -1095,10 +1102,12 @@ config COMEDI_SSV_DNP called ssv_dnp. config COMEDI_MITE + depends on HAS_DMA tristate config COMEDI_NI_TIOCMD tristate + depends on HAS_DMA select COMEDI_NI_TIO select COMEDI_MITE diff --git a/drivers/staging/comedi/comedi_buf.c b/drivers/staging/comedi/comedi_buf.c index ca709901fb3e..b6cd67ad55d1 100644 --- a/drivers/staging/comedi/comedi_buf.c +++ b/drivers/staging/comedi/comedi_buf.c @@ -51,10 +51,12 @@ static void __comedi_buf_free(struct comedi_device *dev, clear_bit(PG_reserved, &(virt_to_page(buf->virt_addr)->flags)); if (s->async_dma_dir != DMA_NONE) { +#ifdef CONFIG_HAS_DMA dma_free_coherent(dev->hw_dev, PAGE_SIZE, buf->virt_addr, buf->dma_addr); +#endif } else { free_page((unsigned long)buf->virt_addr); } @@ -84,11 +86,15 @@ static void __comedi_buf_alloc(struct comedi_device *dev, for (i = 0; i < n_pages; i++) { buf = &async->buf_page_list[i]; if (s->async_dma_dir != DMA_NONE) +#ifdef CONFIG_HAS_DMA buf->virt_addr = dma_alloc_coherent(dev->hw_dev, PAGE_SIZE, &buf->dma_addr, GFP_KERNEL | __GFP_COMP); +#else + break; +#endif else buf->virt_addr = (void *)get_zeroed_page(GFP_KERNEL); if (!buf->virt_addr) -- cgit v1.2.3 From bd304a736afd99cc38bad4d1628e8e2d05d308d5 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Fri, 10 May 2013 14:07:17 +0100 Subject: staging: comedi: ni_mio_common: only do counter commands for ni_pcimio "ni_mio_common.c" holds common code included by "ni_pcimio.c", "ni_atmio.c" and "ni_mio_cs.c", including a common initialization function `ni_E_init()`. Amongst other things, this initializes some counter subdevices to support comedi instructions and asynchronous commands. However, even though it sets up the handlers to support asynchronous commands on these subdevices, the handlers will return an error unless the `PCIDMA` macro is defined (which is defined only in "ni_pcimio.c"). If the `PCIDMA` macro is not defined, the comedi core will needlessly allocate buffers to support the asynchronous commands. Also, `s->async_dma_dir` is set to `DMA_BIDIRECTIONAL`, causing the physical pages for the buffers to be allocated using `dma_alloc_coherent()`. If the comedi core cannot call `dma_alloc_coherent()` because `CONFIG_HAS_DMA` is not defined, it will fail to allocate the buffers, which ultimately causes `ni_E_init()` to fail. Avoid the wastage and prevent the failure by only setting up asynchronous command support for the counter subdevices if the `PCIDMA` macro is defined. Signed-off-by: Ian Abbott Reviewed-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_mio_common.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c index a46d579016d9..8c5dee9b3b05 100644 --- a/drivers/staging/comedi/drivers/ni_mio_common.c +++ b/drivers/staging/comedi/drivers/ni_mio_common.c @@ -310,9 +310,11 @@ static int ni_gpct_insn_read(struct comedi_device *dev, static int ni_gpct_insn_config(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data); +#ifdef PCIDMA static int ni_gpct_cmd(struct comedi_device *dev, struct comedi_subdevice *s); static int ni_gpct_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_cmd *cmd); +#endif static int ni_gpct_cancel(struct comedi_device *dev, struct comedi_subdevice *s); static void handle_gpct_interrupt(struct comedi_device *dev, @@ -4617,9 +4619,7 @@ static int ni_E_init(struct comedi_device *dev) for (j = 0; j < NUM_GPCT; ++j) { s = &dev->subdevices[NI_GPCT_SUBDEV(j)]; s->type = COMEDI_SUBD_COUNTER; - s->subdev_flags = - SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL | SDF_CMD_READ - /* | SDF_CMD_WRITE */ ; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL; s->n_chan = 3; if (board->reg_type & ni_reg_m_series_mask) s->maxdata = 0xffffffff; @@ -4628,11 +4628,14 @@ static int ni_E_init(struct comedi_device *dev) s->insn_read = &ni_gpct_insn_read; s->insn_write = &ni_gpct_insn_write; s->insn_config = &ni_gpct_insn_config; +#ifdef PCIDMA + s->subdev_flags |= SDF_CMD_READ /* | SDF_CMD_WRITE */; s->do_cmd = &ni_gpct_cmd; s->len_chanlist = 1; s->do_cmdtest = &ni_gpct_cmdtest; s->cancel = &ni_gpct_cancel; s->async_dma_dir = DMA_BIDIRECTIONAL; +#endif s->private = &devpriv->counter_dev->counters[j]; devpriv->counter_dev->counters[j].chip_index = 0; @@ -5216,10 +5219,10 @@ static int ni_gpct_insn_write(struct comedi_device *dev, return ni_tio_winsn(counter, insn, data); } +#ifdef PCIDMA static int ni_gpct_cmd(struct comedi_device *dev, struct comedi_subdevice *s) { int retval; -#ifdef PCIDMA struct ni_gpct *counter = s->private; /* const struct comedi_cmd *cmd = &s->async->cmd; */ @@ -5233,23 +5236,20 @@ static int ni_gpct_cmd(struct comedi_device *dev, struct comedi_subdevice *s) ni_tio_acknowledge_and_confirm(counter, NULL, NULL, NULL, NULL); ni_e_series_enable_second_irq(dev, counter->counter_index, 1); retval = ni_tio_cmd(counter, s->async); -#else - retval = -ENOTSUPP; -#endif return retval; } +#endif +#ifdef PCIDMA static int ni_gpct_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_cmd *cmd) { -#ifdef PCIDMA struct ni_gpct *counter = s->private; return ni_tio_cmdtest(counter, cmd); -#else return -ENOTSUPP; -#endif } +#endif static int ni_gpct_cancel(struct comedi_device *dev, struct comedi_subdevice *s) { -- cgit v1.2.3 From e9166139f6f829c2e7bf6695f13e08d09303d6ca Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Fri, 10 May 2013 14:07:16 +0100 Subject: staging: comedi: complain if dma buffer allocation not supported When allocating a buffer to support asynchronous comedi commands, if a DMA coherent buffer was requested but `CONFIG_HAS_DMA` is undefined, bail out of local helper function `__comedi_buf_alloc()` with an error message. Signed-off-by: Ian Abbott Reviewed-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/comedi_buf.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/staging/comedi/comedi_buf.c b/drivers/staging/comedi/comedi_buf.c index b6cd67ad55d1..d4be0e68509b 100644 --- a/drivers/staging/comedi/comedi_buf.c +++ b/drivers/staging/comedi/comedi_buf.c @@ -76,6 +76,12 @@ static void __comedi_buf_alloc(struct comedi_device *dev, struct comedi_buf_page *buf; unsigned i; + if (!IS_ENABLED(CONFIG_HAS_DMA) && s->async_dma_dir != DMA_NONE) { + dev_err(dev->class_dev, + "dma buffer allocation not supported\n"); + return; + } + async->buf_page_list = vzalloc(sizeof(*buf) * n_pages); if (async->buf_page_list) pages = vmalloc(sizeof(struct page *) * n_pages); -- cgit v1.2.3 From 705a421238964e26f13a87d01cefa229eb8a458d Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Thu, 9 May 2013 13:19:37 +0400 Subject: staging: nvec: remove inline marking of EXPORT_SYMBOL functions EXPORT_SYMBOL and inline directives are contradictory to each other. The patch fixes this inconsistency. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov Signed-off-by: Greg Kroah-Hartman --- drivers/staging/nvec/nvec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c index a88959f9a07a..954c9921d5b9 100644 --- a/drivers/staging/nvec/nvec.c +++ b/drivers/staging/nvec/nvec.c @@ -185,7 +185,7 @@ static struct nvec_msg *nvec_msg_alloc(struct nvec_chip *nvec, * * Free the given message */ -inline void nvec_msg_free(struct nvec_chip *nvec, struct nvec_msg *msg) +void nvec_msg_free(struct nvec_chip *nvec, struct nvec_msg *msg) { if (msg != &nvec->tx_scratch) dev_vdbg(nvec->dev, "INFO: Free %ti\n", msg - nvec->msg_pool); -- cgit v1.2.3 From 6eabb3301b1facee669d9938f7c5a0295c21d71d Mon Sep 17 00:00:00 2001 From: Jaccon Bastiaansen Date: Mon, 13 May 2013 17:28:27 +0100 Subject: ARM: 7720/1: ARM v6/v7 cmpxchg64 shouldn't clear upper 32 bits of the old/new value The implementation of cmpxchg64() for the ARM v6 and v7 architecture casts parameter 2 and 3 (the old and new 64bit values) to an unsigned long before calling the atomic_cmpxchg64() function. This clears the top 32 bits of the old and new values, resulting in the wrong values being compare-exchanged. Luckily, this only appears to be used for 64-bit sched_clock, which we don't (yet) have on ARM. This bug was introduced by commit 3e0f5a15f500 ("ARM: 7404/1: cmpxchg64: use atomic64 and local64 routines for cmpxchg64"). Cc: Acked-by: Will Deacon Signed-off-by: Jaccon Bastiaansen Signed-off-by: Russell King --- arch/arm/include/asm/cmpxchg.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h index 7eb18c1d8d6c..4f009c10540d 100644 --- a/arch/arm/include/asm/cmpxchg.h +++ b/arch/arm/include/asm/cmpxchg.h @@ -233,15 +233,15 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr, ((__typeof__(*(ptr)))atomic64_cmpxchg(container_of((ptr), \ atomic64_t, \ counter), \ - (unsigned long)(o), \ - (unsigned long)(n))) + (unsigned long long)(o), \ + (unsigned long long)(n))) #define cmpxchg64_local(ptr, o, n) \ ((__typeof__(*(ptr)))local64_cmpxchg(container_of((ptr), \ local64_t, \ a), \ - (unsigned long)(o), \ - (unsigned long)(n))) + (unsigned long long)(o), \ + (unsigned long long)(n))) #endif /* __LINUX_ARM_ARCH__ >= 6 */ -- cgit v1.2.3 From b57ffac5e57bff33dde3cff35dff5c41876a6d12 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 13 May 2013 08:03:43 +0000 Subject: cpufreq / intel_pstate: use vzalloc() instead of vmalloc()/memset(0) Use vzalloc() instead of vmalloc() and memset(0). Signed-off-by: Wei Yongjun Acked-by: Viresh Kumar Acked-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 0cc7d60525ac..9c36ace92a39 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -709,10 +709,9 @@ static int __init intel_pstate_init(void) pr_info("Intel P-state driver initializing.\n"); - all_cpu_data = vmalloc(sizeof(void *) * num_possible_cpus()); + all_cpu_data = vzalloc(sizeof(void *) * num_possible_cpus()); if (!all_cpu_data) return -ENOMEM; - memset(all_cpu_data, 0, sizeof(void *) * num_possible_cpus()); rc = cpufreq_register_driver(&intel_pstate_driver); if (rc) -- cgit v1.2.3 From dc5aeae4f961ca8ea9511422236d7076585f149a Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 13 May 2013 02:42:11 +0000 Subject: PM: Documentation update for freeze state Signed-off-by: Zhang Rui Signed-off-by: Rafael J. Wysocki --- Documentation/power/devices.txt | 15 ++++++++------- Documentation/power/interface.txt | 4 ++-- Documentation/power/states.txt | 20 +++++++++++++++++--- 3 files changed, 27 insertions(+), 12 deletions(-) diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index 504dfe4d52eb..a66c9821b5ce 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -268,7 +268,7 @@ situations. System Power Management Phases ------------------------------ Suspending or resuming the system is done in several phases. Different phases -are used for standby or memory sleep states ("suspend-to-RAM") and the +are used for freeze, standby, and memory sleep states ("suspend-to-RAM") and the hibernation state ("suspend-to-disk"). Each phase involves executing callbacks for every device before the next phase begins. Not all busses or classes support all these callbacks and not all drivers use all the callbacks. The @@ -309,7 +309,8 @@ execute the corresponding method from dev->driver->pm instead if there is one. Entering System Suspend ----------------------- -When the system goes into the standby or memory sleep state, the phases are: +When the system goes into the freeze, standby or memory sleep state, +the phases are: prepare, suspend, suspend_late, suspend_noirq. @@ -368,7 +369,7 @@ the devices that were suspended. Leaving System Suspend ---------------------- -When resuming from standby or memory sleep, the phases are: +When resuming from freeze, standby or memory sleep, the phases are: resume_noirq, resume_early, resume, complete. @@ -433,8 +434,8 @@ the system log. Entering Hibernation -------------------- -Hibernating the system is more complicated than putting it into the standby or -memory sleep state, because it involves creating and saving a system image. +Hibernating the system is more complicated than putting it into the other +sleep states, because it involves creating and saving a system image. Therefore there are more phases for hibernation, with a different set of callbacks. These phases always run after tasks have been frozen and memory has been freed. @@ -485,8 +486,8 @@ image forms an atomic snapshot of the system state. At this point the system image is saved, and the devices then need to be prepared for the upcoming system shutdown. This is much like suspending them -before putting the system into the standby or memory sleep state, and the phases -are similar. +before putting the system into the freeze, standby or memory sleep state, +and the phases are similar. 9. The prepare phase is discussed above. diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.txt index c537834af005..f1f0f59a7c47 100644 --- a/Documentation/power/interface.txt +++ b/Documentation/power/interface.txt @@ -7,8 +7,8 @@ running. The interface exists in /sys/power/ directory (assuming sysfs is mounted at /sys). /sys/power/state controls system power state. Reading from this file -returns what states are supported, which is hard-coded to 'standby' -(Power-On Suspend), 'mem' (Suspend-to-RAM), and 'disk' +returns what states are supported, which is hard-coded to 'freeze', +'standby' (Power-On Suspend), 'mem' (Suspend-to-RAM), and 'disk' (Suspend-to-Disk). Writing to this file one of those strings causes the system to diff --git a/Documentation/power/states.txt b/Documentation/power/states.txt index 4416b28630df..42f28b7aaf6b 100644 --- a/Documentation/power/states.txt +++ b/Documentation/power/states.txt @@ -2,12 +2,26 @@ System Power Management States -The kernel supports three power management states generically, though -each is dependent on platform support code to implement the low-level -details for each state. This file describes each state, what they are +The kernel supports four power management states generically, though +one is generic and the other three are dependent on platform support +code to implement the low-level details for each state. +This file describes each state, what they are commonly called, what ACPI state they map to, and what string to write to /sys/power/state to enter that state +state: Freeze / Low-Power Idle +ACPI state: S0 +String: "freeze" + +This state is a generic, pure software, light-weight, low-power state. +It allows more energy to be saved relative to idle by freezing user +space and putting all I/O devices into low-power states (possibly +lower-power than available at run time), such that the processors can +spend more time in their idle states. +This state can be used for platforms without Standby/Suspend-to-RAM +support, or it can be used in addition to Suspend-to-RAM (memory sleep) +to provide reduced resume latency. + State: Standby / Power-On Suspend ACPI State: S1 -- cgit v1.2.3 From 86fd03d1607525af3926ff0a299b16c51fa4221b Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 13 May 2013 02:42:12 +0000 Subject: PM / Documentation: remove inaccurate suspend/hibernate transition lantency statement The lantency of the transition from suspend and hibernate is platform-dependent. Thus we should not refer the lantency in the documentation. Signed-off-by: Zhang Rui Signed-off-by: Rafael J. Wysocki --- Documentation/power/states.txt | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/Documentation/power/states.txt b/Documentation/power/states.txt index 42f28b7aaf6b..442d43df9b25 100644 --- a/Documentation/power/states.txt +++ b/Documentation/power/states.txt @@ -36,9 +36,6 @@ We try to put devices in a low-power state equivalent to D1, which also offers low power savings, but low resume latency. Not all devices support D1, and those that don't are left on. -A transition from Standby to the On state should take about 1-2 -seconds. - State: Suspend-to-RAM ACPI State: S3 @@ -56,9 +53,6 @@ transition back to the On state. For at least ACPI, STR requires some minimal boot-strapping code to resume the system from STR. This may be true on other platforms. -A transition from Suspend-to-RAM to the On state should take about -3-5 seconds. - State: Suspend-to-disk ACPI State: S4 @@ -88,7 +82,3 @@ low-power state (like ACPI S4), or it may simply power down. Powering down offers greater savings, and allows this mechanism to work on any system. However, entering a real low-power state allows the user to trigger wake up events (e.g. pressing a key or opening a laptop lid). - -A transition from Suspend-to-Disk to the On state should take about 30 -seconds, though it's typically a bit more with the current -implementation. -- cgit v1.2.3 From 6bc08ed02385378d8c84410fb407fe5640834350 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 13 May 2013 12:00:03 +0000 Subject: PM / hibernate: Correct documentation Correct the meaning of PM_HIBERNATION_PREPARE in the docs. References: http://lkml.kernel.org/r/20130512162717.GA6305@pd.tnic Signed-off-by: Borislav Petkov Signed-off-by: Rafael J. Wysocki --- Documentation/power/notifiers.txt | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/power/notifiers.txt b/Documentation/power/notifiers.txt index c2a4a346c0d9..a81fa254303d 100644 --- a/Documentation/power/notifiers.txt +++ b/Documentation/power/notifiers.txt @@ -15,8 +15,10 @@ A suspend/hibernation notifier may be used for this purpose. The subsystems or drivers having such needs can register suspend notifiers that will be called upon the following events by the PM core: -PM_HIBERNATION_PREPARE The system is going to hibernate or suspend, tasks will - be frozen immediately. +PM_HIBERNATION_PREPARE The system is going to hibernate, tasks will be frozen + immediately. This is different from PM_SUSPEND_PREPARE + below because here we do additional work between notifiers + and drivers freezing. PM_POST_HIBERNATION The system memory state has been restored from a hibernation image or an error occurred during -- cgit v1.2.3 From 613e60a66181acc5c8b63268e939622162da2393 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Sat, 11 May 2013 22:33:19 +0000 Subject: powerpc/mm: Use the correct mask value when looking at pgtable address Our pgtable are 2*sizeof(pte_t)*PTRS_PER_PTE which is PTE_FRAG_SIZE. Instead of depending on frag size, mask with PMD_MASKED_BITS. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pgalloc-64.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h index 91acb12bac92..b66ae722a8e9 100644 --- a/arch/powerpc/include/asm/pgalloc-64.h +++ b/arch/powerpc/include/asm/pgalloc-64.h @@ -186,7 +186,7 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, static inline pgtable_t pmd_pgtable(pmd_t pmd) { - return (pgtable_t)(pmd_val(pmd) & -sizeof(pte_t)*PTRS_PER_PTE); + return (pgtable_t)(pmd_val(pmd) & ~PMD_MASKED_BITS); } static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, -- cgit v1.2.3 From 83d5e64b7efa7f39b10ff5e92792e807a720289c Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Mon, 6 May 2013 10:51:00 +0000 Subject: powerpc: Fix build errors STRICT_MM_TYPECHECKS Signed-off-by: Aneesh Kumar K.V Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pte-hash64-64k.h | 2 +- arch/powerpc/kernel/pci-common.c | 5 ++--- arch/powerpc/mm/init_64.c | 3 ++- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h index 3e13e23e4fdf..d836d945068d 100644 --- a/arch/powerpc/include/asm/pte-hash64-64k.h +++ b/arch/powerpc/include/asm/pte-hash64-64k.h @@ -47,7 +47,7 @@ * generic accessors and iterators here */ #define __real_pte(e,p) ((real_pte_t) { \ - (e), ((e) & _PAGE_COMBO) ? \ + (e), (pte_val(e) & _PAGE_COMBO) ? \ (pte_val(*((p) + PTRS_PER_PTE))) : 0 }) #define __rpte_to_hidx(r,index) ((pte_val((r).pte) & _PAGE_COMBO) ? \ (((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf)) diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index f5c5c90799a7..6053f037ef0a 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -359,7 +359,6 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp, enum pci_mmap_state mmap_state, int write_combine) { - unsigned long prot = pgprot_val(protection); /* Write combine is always 0 on non-memory space mappings. On * memory space, if the user didn't pass 1, we check for a @@ -376,9 +375,9 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp, /* XXX would be nice to have a way to ask for write-through */ if (write_combine) - return pgprot_noncached_wc(prot); + return pgprot_noncached_wc(protection); else - return pgprot_noncached(prot); + return pgprot_noncached(protection); } /* diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index c2787bf779ca..a90b9c458990 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -215,7 +215,8 @@ static void __meminit vmemmap_create_mapping(unsigned long start, unsigned long phys) { int mapped = htab_bolt_mapping(start, start + page_size, phys, - PAGE_KERNEL, mmu_vmemmap_psize, + pgprot_val(PAGE_KERNEL), + mmu_vmemmap_psize, mmu_kernel_ssize); BUG_ON(mapped < 0); } -- cgit v1.2.3 From 79c66ce8f6448a3295a32efeac88c9debd7f7094 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sun, 12 May 2013 15:04:53 +0000 Subject: powerpc/kexec: Fix kexec when using VMX optimised memcpy commit b3f271e86e5a (powerpc: POWER7 optimised memcpy using VMX and enhanced prefetch) uses VMX when it is safe to do so (ie not in interrupt). It also looks at the task struct to decide if we have to save the current tasks' VMX state. kexec calls memcpy() at a point where the task struct may have been overwritten by the new kexec segments. If it has been overwritten then when memcpy -> enable_altivec looks up current->thread.regs->msr we get a cryptic oops or lockup. I also notice we aren't initialising thread_info->cpu, which means smp_processor_id is broken. Fix that too. Signed-off-by: Anton Blanchard Cc: # 3.6+ Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/machine_kexec_64.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index 466a2908bb63..611acdf30096 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -335,10 +336,13 @@ void default_machine_kexec(struct kimage *image) pr_debug("kexec: Starting switchover sequence.\n"); /* switch to a staticly allocated stack. Based on irq stack code. + * We setup preempt_count to avoid using VMX in memcpy. * XXX: the task struct will likely be invalid once we do the copy! */ kexec_stack.thread_info.task = current_thread_info()->task; kexec_stack.thread_info.flags = 0; + kexec_stack.thread_info.preempt_count = HARDIRQ_OFFSET; + kexec_stack.thread_info.cpu = current_thread_info()->cpu; /* We need a static PACA, too; copy this CPU's PACA over and switch to * it. Also poison per_cpu_offset to catch anyone using non-static -- cgit v1.2.3 From a94a14720eaf55c5f06d6ca7ecbe3f87f6864fc6 Mon Sep 17 00:00:00 2001 From: Vasant Hegde Date: Tue, 7 May 2013 16:54:47 +0000 Subject: powerpc/rtas_flash: Fix validate_flash buffer overflow issue ibm,validate-flash-image RTAS call output buffer contains 150 - 200 bytes of data on latest system. Presently we have output buffer size as 64 bytes and we use sprintf to copy data from RTAS buffer to local buffer. This causes kernel oops (see below call trace). This patch increases local buffer size to 256 and also uses snprintf instead of sprintf to copy data from RTAS buffer. Kernel call trace : ------------------- Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=1024 NUMA pSeries Modules linked in: nfs fscache lockd auth_rpcgss nfs_acl sunrpc fuse loop dm_mod ipv6 ipv6_lib usb_storage ehea(X) sr_mod qlge ses cdrom enclosure st be2net sg ext3 jbd mbcache usbhid hid ohci_hcd ehci_hcd usbcore qla2xxx usb_common sd_mod crc_t10dif scsi_dh_hp_sw scsi_dh_rdac scsi_dh_alua scsi_dh_emc scsi_dh lpfc scsi_transport_fc scsi_tgt ipr(X) libata scsi_mod Supported: Yes NIP: 4520323031333130 LR: 4520323031333130 CTR: 0000000000000000 REGS: c0000001b91779b0 TRAP: 0400 Tainted: G X (3.0.13-0.27-ppc64) MSR: 8000000040009032 CR: 44022488 XER: 20000018 TASK = c0000001bca1aba0[4736] 'cat' THREAD: c0000001b9174000 CPU: 36 GPR00: 4520323031333130 c0000001b9177c30 c000000000f87c98 000000000000009b GPR04: c0000001b9177c4a 000000000000000b 3520323031333130 2032303133313031 GPR08: 3133313031350a4d 000000000000009b 0000000000000000 c0000000003664a4 GPR12: 0000000022022448 c000000003ee6c00 0000000000000002 00000000100e8a90 GPR16: 00000000100cb9d8 0000000010093370 000000001001d310 0000000000000000 GPR20: 0000000000008000 00000000100fae60 000000000000005e 0000000000000000 GPR24: 0000000010129350 46573738302e3030 2046573738302e30 300a4d4720323031 GPR28: 333130313520554e 4b4e4f574e0a4d47 2032303133313031 3520323031333130 NIP [4520323031333130] 0x4520323031333130 LR [4520323031333130] 0x4520323031333130 Call Trace: [c0000001b9177c30] [4520323031333130] 0x4520323031333130 (unreliable) Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX Signed-off-by: Vasant Hegde Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/rtas_flash.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index 5b3022470126..2f3cdb01506d 100644 --- a/arch/powerpc/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -89,6 +89,7 @@ /* Array sizes */ #define VALIDATE_BUF_SIZE 4096 +#define VALIDATE_MSG_LEN 256 #define RTAS_MSG_MAXLEN 64 /* Quirk - RTAS requires 4k list length and block size */ @@ -466,7 +467,7 @@ static void validate_flash(struct rtas_validate_flash_t *args_buf) } static int get_validate_flash_msg(struct rtas_validate_flash_t *args_buf, - char *msg) + char *msg, int msglen) { int n; @@ -474,7 +475,8 @@ static int get_validate_flash_msg(struct rtas_validate_flash_t *args_buf, n = sprintf(msg, "%d\n", args_buf->update_results); if ((args_buf->update_results >= VALIDATE_CUR_UNKNOWN) || (args_buf->update_results == VALIDATE_TMP_UPDATE)) - n += sprintf(msg + n, "%s\n", args_buf->buf); + n += snprintf(msg + n, msglen - n, "%s\n", + args_buf->buf); } else { n = sprintf(msg, "%d\n", args_buf->status); } @@ -486,11 +488,11 @@ static ssize_t validate_flash_read(struct file *file, char __user *buf, { struct rtas_validate_flash_t *const args_buf = &rtas_validate_flash_data; - char msg[RTAS_MSG_MAXLEN]; + char msg[VALIDATE_MSG_LEN]; int msglen; mutex_lock(&rtas_validate_flash_mutex); - msglen = get_validate_flash_msg(args_buf, msg); + msglen = get_validate_flash_msg(args_buf, msg, VALIDATE_MSG_LEN); mutex_unlock(&rtas_validate_flash_mutex); return simple_read_from_buffer(buf, count, ppos, msg, msglen); -- cgit v1.2.3 From 120496ac2d2d60aee68d3123a68169502a85f4b5 Mon Sep 17 00:00:00 2001 From: Robert Jennings Date: Tue, 7 May 2013 04:34:11 +0000 Subject: powerpc: Bring all threads online prior to migration/hibernation This patch brings online all threads which are present but not online prior to migration/hibernation. After migration/hibernation those threads are taken back offline. During migration/hibernation all online CPUs must call H_JOIN, this is required by the hypervisor. Without this patch, threads that are offline (H_CEDE'd) will not be woken to make the H_JOIN call and the OS will be deadlocked (all threads either JOIN'd or CEDE'd). Cc: Signed-off-by: Robert Jennings Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/rtas.h | 2 + arch/powerpc/kernel/rtas.c | 113 +++++++++++++++++++++++++++++++ arch/powerpc/platforms/pseries/suspend.c | 22 ++++++ 3 files changed, 137 insertions(+) diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h index a8bc2bb4adc9..34fd70488d83 100644 --- a/arch/powerpc/include/asm/rtas.h +++ b/arch/powerpc/include/asm/rtas.h @@ -264,6 +264,8 @@ extern void rtas_progress(char *s, unsigned short hex); extern void rtas_initialize(void); extern int rtas_suspend_cpu(struct rtas_suspend_me_data *data); extern int rtas_suspend_last_cpu(struct rtas_suspend_me_data *data); +extern int rtas_online_cpus_mask(cpumask_var_t cpus); +extern int rtas_offline_cpus_mask(cpumask_var_t cpus); extern int rtas_ibm_suspend_me(struct rtas_args *); struct rtc_time; diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 1fd6e7b2f390..52add6f3e201 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -807,6 +808,95 @@ static void rtas_percpu_suspend_me(void *info) __rtas_suspend_cpu((struct rtas_suspend_me_data *)info, 1); } +enum rtas_cpu_state { + DOWN, + UP, +}; + +#ifndef CONFIG_SMP +static int rtas_cpu_state_change_mask(enum rtas_cpu_state state, + cpumask_var_t cpus) +{ + if (!cpumask_empty(cpus)) { + cpumask_clear(cpus); + return -EINVAL; + } else + return 0; +} +#else +/* On return cpumask will be altered to indicate CPUs changed. + * CPUs with states changed will be set in the mask, + * CPUs with status unchanged will be unset in the mask. */ +static int rtas_cpu_state_change_mask(enum rtas_cpu_state state, + cpumask_var_t cpus) +{ + int cpu; + int cpuret = 0; + int ret = 0; + + if (cpumask_empty(cpus)) + return 0; + + for_each_cpu(cpu, cpus) { + switch (state) { + case DOWN: + cpuret = cpu_down(cpu); + break; + case UP: + cpuret = cpu_up(cpu); + break; + } + if (cpuret) { + pr_debug("%s: cpu_%s for cpu#%d returned %d.\n", + __func__, + ((state == UP) ? "up" : "down"), + cpu, cpuret); + if (!ret) + ret = cpuret; + if (state == UP) { + /* clear bits for unchanged cpus, return */ + cpumask_shift_right(cpus, cpus, cpu); + cpumask_shift_left(cpus, cpus, cpu); + break; + } else { + /* clear bit for unchanged cpu, continue */ + cpumask_clear_cpu(cpu, cpus); + } + } + } + + return ret; +} +#endif + +int rtas_online_cpus_mask(cpumask_var_t cpus) +{ + int ret; + + ret = rtas_cpu_state_change_mask(UP, cpus); + + if (ret) { + cpumask_var_t tmp_mask; + + if (!alloc_cpumask_var(&tmp_mask, GFP_TEMPORARY)) + return ret; + + /* Use tmp_mask to preserve cpus mask from first failure */ + cpumask_copy(tmp_mask, cpus); + rtas_offline_cpus_mask(tmp_mask); + free_cpumask_var(tmp_mask); + } + + return ret; +} +EXPORT_SYMBOL(rtas_online_cpus_mask); + +int rtas_offline_cpus_mask(cpumask_var_t cpus) +{ + return rtas_cpu_state_change_mask(DOWN, cpus); +} +EXPORT_SYMBOL(rtas_offline_cpus_mask); + int rtas_ibm_suspend_me(struct rtas_args *args) { long state; @@ -814,6 +904,8 @@ int rtas_ibm_suspend_me(struct rtas_args *args) unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; struct rtas_suspend_me_data data; DECLARE_COMPLETION_ONSTACK(done); + cpumask_var_t offline_mask; + int cpuret; if (!rtas_service_present("ibm,suspend-me")) return -ENOSYS; @@ -837,11 +929,24 @@ int rtas_ibm_suspend_me(struct rtas_args *args) return 0; } + if (!alloc_cpumask_var(&offline_mask, GFP_TEMPORARY)) + return -ENOMEM; + atomic_set(&data.working, 0); atomic_set(&data.done, 0); atomic_set(&data.error, 0); data.token = rtas_token("ibm,suspend-me"); data.complete = &done; + + /* All present CPUs must be online */ + cpumask_andnot(offline_mask, cpu_present_mask, cpu_online_mask); + cpuret = rtas_online_cpus_mask(offline_mask); + if (cpuret) { + pr_err("%s: Could not bring present CPUs online.\n", __func__); + atomic_set(&data.error, cpuret); + goto out; + } + stop_topology_update(); /* Call function on all CPUs. One of us will make the @@ -857,6 +962,14 @@ int rtas_ibm_suspend_me(struct rtas_args *args) start_topology_update(); + /* Take down CPUs not online prior to suspend */ + cpuret = rtas_offline_cpus_mask(offline_mask); + if (cpuret) + pr_warn("%s: Could not restore CPUs to offline state.\n", + __func__); + +out: + free_cpumask_var(offline_mask); return atomic_read(&data.error); } #else /* CONFIG_PPC_PSERIES */ diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c index 47226e04126d..5f997e79d570 100644 --- a/arch/powerpc/platforms/pseries/suspend.c +++ b/arch/powerpc/platforms/pseries/suspend.c @@ -16,6 +16,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include #include #include #include @@ -126,11 +127,15 @@ static ssize_t store_hibernate(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { + cpumask_var_t offline_mask; int rc; if (!capable(CAP_SYS_ADMIN)) return -EPERM; + if (!alloc_cpumask_var(&offline_mask, GFP_TEMPORARY)) + return -ENOMEM; + stream_id = simple_strtoul(buf, NULL, 16); do { @@ -140,15 +145,32 @@ static ssize_t store_hibernate(struct device *dev, } while (rc == -EAGAIN); if (!rc) { + /* All present CPUs must be online */ + cpumask_andnot(offline_mask, cpu_present_mask, + cpu_online_mask); + rc = rtas_online_cpus_mask(offline_mask); + if (rc) { + pr_err("%s: Could not bring present CPUs online.\n", + __func__); + goto out; + } + stop_topology_update(); rc = pm_suspend(PM_SUSPEND_MEM); start_topology_update(); + + /* Take down CPUs not online prior to suspend */ + if (!rtas_offline_cpus_mask(offline_mask)) + pr_warn("%s: Could not restore CPUs to offline " + "state.\n", __func__); } stream_id = 0; if (!rc) rc = count; +out: + free_cpumask_var(offline_mask); return rc; } -- cgit v1.2.3 From b80ec3dc8e100f6c8b27c02cbb6079d401c3a054 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Mon, 6 May 2013 18:43:39 +0000 Subject: powerpc: Make CONFIG_RTAS_PROC depend on CONFIG_PROC_FS We are getting build errors with CONFIG_PROC_FS=n: arch/powerpc/kernel/rtas_flash.c In function 'rtas_flash_init': 745:33: error: unused variable 'f' [-Werror=unused-variable] But rtas_flash.c should not be built when CONFIG_PROC_FS=n, beacause all it does is provide a /proc interface to the RTAS flash routines. CONFIG_RTAS_FLASH already depends on CONFIG_RTAS_PROC, to indicate that it depends on the RTAS proc support, but CONFIG_RTAS_PROC does not depend on CONFIG_PROC_FS. So fix that. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 34d224be93ba..632444f15550 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -128,7 +128,7 @@ config PPC_RTAS_DAEMON config RTAS_PROC bool "Proc interface to RTAS" - depends on PPC_RTAS + depends on PPC_RTAS && PROC_FS default y config RTAS_FLASH -- cgit v1.2.3 From af945cf4bfc6586f0739b8c7f67af75576dec25e Mon Sep 17 00:00:00 2001 From: Li Zhong Date: Mon, 6 May 2013 22:44:41 +0000 Subject: powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning again Saw this warning again, and this time from the ret_from_fork path. It seems we could clear the back chain earlier in copy_thread(), which could cover both path, and also fix potential lockdep usage in schedule_tail(), or exception occurred before we clear the back chain. Signed-off-by: Li Zhong Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_32.S | 2 -- arch/powerpc/kernel/entry_64.S | 2 -- arch/powerpc/kernel/process.c | 1 + 3 files changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index e514de57a125..d22e73e4618b 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -439,8 +439,6 @@ ret_from_fork: ret_from_kernel_thread: REST_NVGPRS(r1) bl schedule_tail - li r3,0 - stw r3,0(r1) mtlr r14 mr r3,r15 PPC440EP_ERR42 diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 3fe5259e2fea..48e8a86e7cb2 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -376,8 +376,6 @@ _GLOBAL(ret_from_fork) _GLOBAL(ret_from_kernel_thread) bl .schedule_tail REST_NVGPRS(r1) - li r3,0 - std r3,0(r1) ld r14, 0(r14) mtlr r14 mr r3,r15 diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index ceb4e7b62cf4..21981a89e394 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -971,6 +971,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, * do some house keeping and then return from the fork or clone * system call, using the stack frame created above. */ + ((unsigned long *)sp)[0] = 0; sp -= sizeof(struct pt_regs); kregs = (struct pt_regs *) sp; sp -= STACK_FRAME_OVERHEAD; -- cgit v1.2.3 From ee8209fd026b074bb8eb75bece516a338a281b1b Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 8 May 2013 11:55:48 +0300 Subject: dma: acpi-dma: parse CSRT to extract additional resources Since we have CSRT only to get additional DMA controller resources, let's get rid of drivers/acpi/csrt.c and move its logic inside ACPI DMA helpers code. Signed-off-by: Andy Shevchenko Signed-off-by: Mika Westerberg Acked-by: Rafael J. Wysocki Signed-off-by: Vinod Koul --- drivers/acpi/Makefile | 1 - drivers/acpi/csrt.c | 159 ------------------------------------------- drivers/acpi/internal.h | 1 - drivers/acpi/scan.c | 1 - drivers/dma/acpi-dma.c | 172 ++++++++++++++++++++++++++++++++++++++++++++++- include/linux/acpi_dma.h | 4 ++ 6 files changed, 173 insertions(+), 165 deletions(-) delete mode 100644 drivers/acpi/csrt.c diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index ecb743bf05a5..6050c8028dce 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -38,7 +38,6 @@ acpi-y += processor_core.o acpi-y += ec.o acpi-$(CONFIG_ACPI_DOCK) += dock.o acpi-y += pci_root.o pci_link.o pci_irq.o -acpi-y += csrt.o acpi-$(CONFIG_X86_INTEL_LPSS) += acpi_lpss.o acpi-y += acpi_platform.o acpi-y += power.o diff --git a/drivers/acpi/csrt.c b/drivers/acpi/csrt.c deleted file mode 100644 index 5c15a91faf0b..000000000000 --- a/drivers/acpi/csrt.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * Support for Core System Resources Table (CSRT) - * - * Copyright (C) 2013, Intel Corporation - * Authors: Mika Westerberg - * Andy Shevchenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define pr_fmt(fmt) "ACPI: CSRT: " fmt - -#include -#include -#include -#include -#include -#include - -ACPI_MODULE_NAME("CSRT"); - -static int __init acpi_csrt_parse_shared_info(struct platform_device *pdev, - const struct acpi_csrt_group *grp) -{ - const struct acpi_csrt_shared_info *si; - struct resource res[3]; - size_t nres; - int ret; - - memset(res, 0, sizeof(res)); - nres = 0; - - si = (const struct acpi_csrt_shared_info *)&grp[1]; - /* - * The peripherals that are listed on CSRT typically support only - * 32-bit addresses so we only use the low part of MMIO base for - * now. - */ - if (!si->mmio_base_high && si->mmio_base_low) { - /* - * There is no size of the memory resource in shared_info - * so we assume that it is 4k here. - */ - res[nres].start = si->mmio_base_low; - res[nres].end = res[0].start + SZ_4K - 1; - res[nres++].flags = IORESOURCE_MEM; - } - - if (si->gsi_interrupt) { - int irq = acpi_register_gsi(NULL, si->gsi_interrupt, - si->interrupt_mode, - si->interrupt_polarity); - res[nres].start = irq; - res[nres].end = irq; - res[nres++].flags = IORESOURCE_IRQ; - } - - if (si->base_request_line || si->num_handshake_signals) { - /* - * We pass the driver a DMA resource describing the range - * of request lines the device supports. - */ - res[nres].start = si->base_request_line; - res[nres].end = res[nres].start + si->num_handshake_signals - 1; - res[nres++].flags = IORESOURCE_DMA; - } - - ret = platform_device_add_resources(pdev, res, nres); - if (ret) { - if (si->gsi_interrupt) - acpi_unregister_gsi(si->gsi_interrupt); - return ret; - } - - return 0; -} - -static int __init -acpi_csrt_parse_resource_group(const struct acpi_csrt_group *grp) -{ - struct platform_device *pdev; - char vendor[5], name[16]; - int ret, i; - - vendor[0] = grp->vendor_id; - vendor[1] = grp->vendor_id >> 8; - vendor[2] = grp->vendor_id >> 16; - vendor[3] = grp->vendor_id >> 24; - vendor[4] = '\0'; - - if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info)) - return -ENODEV; - - snprintf(name, sizeof(name), "%s%04X", vendor, grp->device_id); - pdev = platform_device_alloc(name, PLATFORM_DEVID_AUTO); - if (!pdev) - return -ENOMEM; - - /* Add resources based on the shared info */ - ret = acpi_csrt_parse_shared_info(pdev, grp); - if (ret) - goto fail; - - ret = platform_device_add(pdev); - if (ret) - goto fail; - - for (i = 0; i < pdev->num_resources; i++) - dev_dbg(&pdev->dev, "%pR\n", &pdev->resource[i]); - - return 0; - -fail: - platform_device_put(pdev); - return ret; -} - -/* - * CSRT or Core System Resources Table is a proprietary ACPI table - * introduced by Microsoft. This table can contain devices that are not in - * the system DSDT table. In particular DMA controllers might be described - * here. - * - * We present these devices as normal platform devices that don't have ACPI - * IDs or handle. The platform device name will be something like - * ..auto for example: INTL9C06.0.auto. - */ -void __init acpi_csrt_init(void) -{ - struct acpi_csrt_group *grp, *end; - struct acpi_table_csrt *csrt; - acpi_status status; - int ret; - - status = acpi_get_table(ACPI_SIG_CSRT, 0, - (struct acpi_table_header **)&csrt); - if (ACPI_FAILURE(status)) { - if (status != AE_NOT_FOUND) - pr_warn("failed to get the CSRT table\n"); - return; - } - - pr_debug("parsing CSRT table for devices\n"); - - grp = (struct acpi_csrt_group *)(csrt + 1); - end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length); - - while (grp < end) { - ret = acpi_csrt_parse_resource_group(grp); - if (ret) { - pr_warn("error in parsing resource group: %d\n", ret); - return; - } - - grp = (struct acpi_csrt_group *)((void *)grp + grp->length); - } -} diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 6f1afd9118c8..297cbf456f86 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -35,7 +35,6 @@ void acpi_pci_link_init(void); void acpi_pci_root_hp_init(void); void acpi_platform_init(void); int acpi_sysfs_init(void); -void acpi_csrt_init(void); #ifdef CONFIG_ACPI_CONTAINER void acpi_container_init(void); #else diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index fe158fd4f1df..aacc08f951aa 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -2042,7 +2042,6 @@ int __init acpi_scan_init(void) acpi_pci_link_init(); acpi_platform_init(); acpi_lpss_init(); - acpi_csrt_init(); acpi_container_init(); acpi_memory_hotplug_init(); diff --git a/drivers/dma/acpi-dma.c b/drivers/dma/acpi-dma.c index ba6fc62e9651..5a18f82f732a 100644 --- a/drivers/dma/acpi-dma.c +++ b/drivers/dma/acpi-dma.c @@ -4,7 +4,8 @@ * Based on of-dma.c * * Copyright (C) 2013, Intel Corporation - * Author: Andy Shevchenko + * Authors: Andy Shevchenko + * Mika Westerberg * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,12 +17,124 @@ #include #include #include +#include #include #include static LIST_HEAD(acpi_dma_list); static DEFINE_MUTEX(acpi_dma_lock); +/** + * acpi_dma_parse_resource_group - match device and parse resource group + * @grp: CSRT resource group + * @adev: ACPI device to match with + * @adma: struct acpi_dma of the given DMA controller + * + * Returns 1 on success, 0 when no information is available, or appropriate + * errno value on error. + * + * In order to match a device from DSDT table to the corresponding CSRT device + * we use MMIO address and IRQ. + */ +static int acpi_dma_parse_resource_group(const struct acpi_csrt_group *grp, + struct acpi_device *adev, struct acpi_dma *adma) +{ + const struct acpi_csrt_shared_info *si; + struct list_head resource_list; + struct resource_list_entry *rentry; + resource_size_t mem = 0, irq = 0; + u32 vendor_id; + int ret; + + if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info)) + return -ENODEV; + + INIT_LIST_HEAD(&resource_list); + ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL); + if (ret <= 0) + return 0; + + list_for_each_entry(rentry, &resource_list, node) { + if (resource_type(&rentry->res) == IORESOURCE_MEM) + mem = rentry->res.start; + else if (resource_type(&rentry->res) == IORESOURCE_IRQ) + irq = rentry->res.start; + } + + acpi_dev_free_resource_list(&resource_list); + + /* Consider initial zero values as resource not found */ + if (mem == 0 && irq == 0) + return 0; + + si = (const struct acpi_csrt_shared_info *)&grp[1]; + + /* Match device by MMIO and IRQ */ + if (si->mmio_base_low != mem || si->gsi_interrupt != irq) + return 0; + + vendor_id = le32_to_cpu(grp->vendor_id); + dev_dbg(&adev->dev, "matches with %.4s%04X (rev %u)\n", + (char *)&vendor_id, grp->device_id, grp->revision); + + /* Check if the request line range is available */ + if (si->base_request_line == 0 && si->num_handshake_signals == 0) + return 0; + + adma->base_request_line = si->base_request_line; + adma->end_request_line = si->base_request_line + + si->num_handshake_signals - 1; + + dev_dbg(&adev->dev, "request line base: 0x%04x end: 0x%04x\n", + adma->base_request_line, adma->end_request_line); + + return 1; +} + +/** + * acpi_dma_parse_csrt - parse CSRT to exctract additional DMA resources + * @adev: ACPI device to match with + * @adma: struct acpi_dma of the given DMA controller + * + * CSRT or Core System Resources Table is a proprietary ACPI table + * introduced by Microsoft. This table can contain devices that are not in + * the system DSDT table. In particular DMA controllers might be described + * here. + * + * We are using this table to get the request line range of the specific DMA + * controller to be used later. + * + */ +static void acpi_dma_parse_csrt(struct acpi_device *adev, struct acpi_dma *adma) +{ + struct acpi_csrt_group *grp, *end; + struct acpi_table_csrt *csrt; + acpi_status status; + int ret; + + status = acpi_get_table(ACPI_SIG_CSRT, 0, + (struct acpi_table_header **)&csrt); + if (ACPI_FAILURE(status)) { + if (status != AE_NOT_FOUND) + dev_warn(&adev->dev, "failed to get the CSRT table\n"); + return; + } + + grp = (struct acpi_csrt_group *)(csrt + 1); + end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length); + + while (grp < end) { + ret = acpi_dma_parse_resource_group(grp, adev, adma); + if (ret < 0) { + dev_warn(&adev->dev, + "error in parsing resource group\n"); + return; + } + + grp = (struct acpi_csrt_group *)((void *)grp + grp->length); + } +} + /** * acpi_dma_controller_register - Register a DMA controller to ACPI DMA helpers * @dev: struct device of DMA controller @@ -61,6 +174,8 @@ int acpi_dma_controller_register(struct device *dev, adma->acpi_dma_xlate = acpi_dma_xlate; adma->data = data; + acpi_dma_parse_csrt(adev, adma); + /* Now queue acpi_dma controller structure in list */ mutex_lock(&acpi_dma_lock); list_add_tail(&adma->dma_controllers, &acpi_dma_list); @@ -149,6 +264,45 @@ void devm_acpi_dma_controller_free(struct device *dev) } EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_free); +/** + * acpi_dma_update_dma_spec - prepare dma specifier to pass to translation function + * @adma: struct acpi_dma of DMA controller + * @dma_spec: dma specifier to update + * + * Returns 0, if no information is avaiable, -1 on mismatch, and 1 otherwise. + * + * Accordingly to ACPI 5.0 Specification Table 6-170 "Fixed DMA Resource + * Descriptor": + * DMA Request Line bits is a platform-relative number uniquely + * identifying the request line assigned. Request line-to-Controller + * mapping is done in a controller-specific OS driver. + * That's why we can safely adjust slave_id when the appropriate controller is + * found. + */ +static int acpi_dma_update_dma_spec(struct acpi_dma *adma, + struct acpi_dma_spec *dma_spec) +{ + /* Set link to the DMA controller device */ + dma_spec->dev = adma->dev; + + /* Check if the request line range is available */ + if (adma->base_request_line == 0 && adma->end_request_line == 0) + return 0; + + /* Check if slave_id falls to the range */ + if (dma_spec->slave_id < adma->base_request_line || + dma_spec->slave_id > adma->end_request_line) + return -1; + + /* + * Here we adjust slave_id. It should be a relative number to the base + * request line. + */ + dma_spec->slave_id -= adma->base_request_line; + + return 1; +} + struct acpi_dma_parser_data { struct acpi_dma_spec dma_spec; size_t index; @@ -193,6 +347,7 @@ struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev, struct acpi_device *adev; struct acpi_dma *adma; struct dma_chan *chan = NULL; + int found; /* Check if the device was enumerated by ACPI */ if (!dev || !ACPI_HANDLE(dev)) @@ -219,9 +374,20 @@ struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev, mutex_lock(&acpi_dma_lock); list_for_each_entry(adma, &acpi_dma_list, dma_controllers) { - dma_spec->dev = adma->dev; + /* + * We are not going to call translation function if slave_id + * doesn't fall to the request range. + */ + found = acpi_dma_update_dma_spec(adma, dma_spec); + if (found < 0) + continue; chan = adma->acpi_dma_xlate(dma_spec, adma); - if (chan) + /* + * Try to get a channel only from the DMA controller that + * matches the slave_id. See acpi_dma_update_dma_spec() + * description for the details. + */ + if (found > 0 || chan) break; } diff --git a/include/linux/acpi_dma.h b/include/linux/acpi_dma.h index d09deabc7bf6..fb0298082916 100644 --- a/include/linux/acpi_dma.h +++ b/include/linux/acpi_dma.h @@ -37,6 +37,8 @@ struct acpi_dma_spec { * @dev: struct device of this controller * @acpi_dma_xlate: callback function to find a suitable channel * @data: private data used by a callback function + * @base_request_line: first supported request line (CSRT) + * @end_request_line: last supported request line (CSRT) */ struct acpi_dma { struct list_head dma_controllers; @@ -44,6 +46,8 @@ struct acpi_dma { struct dma_chan *(*acpi_dma_xlate) (struct acpi_dma_spec *, struct acpi_dma *); void *data; + unsigned short base_request_line; + unsigned short end_request_line; }; /* Used with acpi_dma_simple_xlate() */ -- cgit v1.2.3 From b59cc200ac025aca597fb21862c1c9e667f2eff2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 8 May 2013 11:55:49 +0300 Subject: ACPI / LPSS: register clock device for Lynxpoint DMA properly The DMA controller in Lynxpoint is enumerated as a regular ACPI device now. To work properly it is using the LPSS root clock as a functional clock. That's why we have to register the clock device accordingly to the ACPI ID of the DMA controller. The acpi_lpss.c module is responsible to do the job. This patch also removes hardcoded name of the DMA device in clk-lpt.c and the name of the root clock in acpi_lpss.c. Signed-off-by: Rafael J. Wysocki Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul --- drivers/acpi/acpi_lpss.c | 26 ++++++++++++++++++++++---- drivers/clk/x86/clk-lpt.c | 15 +++++++++++---- include/linux/platform_data/clk-lpss.h | 5 +++++ 3 files changed, 38 insertions(+), 8 deletions(-) diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index b1c95422ce74..652fd5ce303c 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -35,11 +35,16 @@ ACPI_MODULE_NAME("acpi_lpss"); struct lpss_device_desc { bool clk_required; - const char *clk_parent; + const char *clkdev_name; bool ltr_required; unsigned int prv_offset; }; +static struct lpss_device_desc lpss_dma_desc = { + .clk_required = true, + .clkdev_name = "hclk", +}; + struct lpss_private_data { void __iomem *mmio_base; resource_size_t mmio_size; @@ -49,7 +54,6 @@ struct lpss_private_data { static struct lpss_device_desc lpt_dev_desc = { .clk_required = true, - .clk_parent = "lpss_clk", .prv_offset = 0x800, .ltr_required = true, }; @@ -60,6 +64,9 @@ static struct lpss_device_desc lpt_sdio_dev_desc = { }; static const struct acpi_device_id acpi_lpss_device_ids[] = { + /* Generic LPSS devices */ + { "INTL9C60", (unsigned long)&lpss_dma_desc }, + /* Lynxpoint LPSS devices */ { "INT33C0", (unsigned long)&lpt_dev_desc }, { "INT33C1", (unsigned long)&lpt_dev_desc }, @@ -91,16 +98,27 @@ static int register_device_clock(struct acpi_device *adev, struct lpss_private_data *pdata) { const struct lpss_device_desc *dev_desc = pdata->dev_desc; + struct lpss_clk_data *clk_data; if (!lpss_clk_dev) lpt_register_clock_device(); - if (!dev_desc->clk_parent || !pdata->mmio_base + clk_data = platform_get_drvdata(lpss_clk_dev); + if (!clk_data) + return -ENODEV; + + if (dev_desc->clkdev_name) { + clk_register_clkdev(clk_data->clk, dev_desc->clkdev_name, + dev_name(&adev->dev)); + return 0; + } + + if (!pdata->mmio_base || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE) return -ENODATA; pdata->clk = clk_register_gate(NULL, dev_name(&adev->dev), - dev_desc->clk_parent, 0, + clk_data->name, 0, pdata->mmio_base + dev_desc->prv_offset, 0, 0, NULL); if (IS_ERR(pdata->clk)) diff --git a/drivers/clk/x86/clk-lpt.c b/drivers/clk/x86/clk-lpt.c index 5cf4f4686406..4f45eee9e33b 100644 --- a/drivers/clk/x86/clk-lpt.c +++ b/drivers/clk/x86/clk-lpt.c @@ -15,22 +15,29 @@ #include #include #include +#include #include #define PRV_CLOCK_PARAMS 0x800 static int lpt_clk_probe(struct platform_device *pdev) { + struct lpss_clk_data *drvdata; struct clk *clk; + drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + /* LPSS free running clock */ - clk = clk_register_fixed_rate(&pdev->dev, "lpss_clk", NULL, CLK_IS_ROOT, - 100000000); + drvdata->name = "lpss_clk"; + clk = clk_register_fixed_rate(&pdev->dev, drvdata->name, NULL, + CLK_IS_ROOT, 100000000); if (IS_ERR(clk)) return PTR_ERR(clk); - /* Shared DMA clock */ - clk_register_clkdev(clk, "hclk", "INTL9C60.0.auto"); + drvdata->clk = clk; + platform_set_drvdata(pdev, drvdata); return 0; } diff --git a/include/linux/platform_data/clk-lpss.h b/include/linux/platform_data/clk-lpss.h index 528e73ce46d2..23901992b9dd 100644 --- a/include/linux/platform_data/clk-lpss.h +++ b/include/linux/platform_data/clk-lpss.h @@ -13,6 +13,11 @@ #ifndef __CLK_LPSS_H #define __CLK_LPSS_H +struct lpss_clk_data { + const char *name; + struct clk *clk; +}; + extern int lpt_clk_init(void); #endif /* __CLK_LPSS_H */ -- cgit v1.2.3 From 75b93da43aa1132bf23dafbb4badb028ccf78129 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 14 May 2013 15:10:02 +1000 Subject: powerpc/powernv: Detect OPAL v3 API version Future firmwares will support that new version Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/firmware.h | 4 +++- arch/powerpc/include/asm/opal.h | 3 ++- arch/powerpc/platforms/powernv/opal.c | 6 +++++- arch/powerpc/platforms/powernv/setup.c | 4 +++- 4 files changed, 13 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h index 0df54646f968..681bc0314b6b 100644 --- a/arch/powerpc/include/asm/firmware.h +++ b/arch/powerpc/include/asm/firmware.h @@ -52,6 +52,7 @@ #define FW_FEATURE_BEST_ENERGY ASM_CONST(0x0000000080000000) #define FW_FEATURE_TYPE1_AFFINITY ASM_CONST(0x0000000100000000) #define FW_FEATURE_PRRN ASM_CONST(0x0000000200000000) +#define FW_FEATURE_OPALv3 ASM_CONST(0x0000000400000000) #ifndef __ASSEMBLY__ @@ -69,7 +70,8 @@ enum { FW_FEATURE_SET_MODE | FW_FEATURE_BEST_ENERGY | FW_FEATURE_TYPE1_AFFINITY | FW_FEATURE_PRRN, FW_FEATURE_PSERIES_ALWAYS = 0, - FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2, + FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2 | + FW_FEATURE_OPALv3, FW_FEATURE_POWERNV_ALWAYS = 0, FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index b2906adb89d3..cbb9305ab15a 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -243,7 +243,8 @@ enum OpalMCE_TlbErrorType { enum OpalThreadStatus { OPAL_THREAD_INACTIVE = 0x0, - OPAL_THREAD_STARTED = 0x1 + OPAL_THREAD_STARTED = 0x1, + OPAL_THREAD_UNAVAILABLE = 0x2 /* opal-v3 */ }; enum OpalPciBusCompare { diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index 27907cb18b8a..628c564ceadb 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -56,7 +56,11 @@ int __init early_init_dt_scan_opal(unsigned long node, opal.entry, entryp, entrysz); powerpc_firmware_features |= FW_FEATURE_OPAL; - if (of_flat_dt_is_compatible(node, "ibm,opal-v2")) { + if (of_flat_dt_is_compatible(node, "ibm,opal-v3")) { + powerpc_firmware_features |= FW_FEATURE_OPALv2; + powerpc_firmware_features |= FW_FEATURE_OPALv3; + printk("OPAL V3 detected !\n"); + } else if (of_flat_dt_is_compatible(node, "ibm,opal-v2")) { powerpc_firmware_features |= FW_FEATURE_OPALv2; printk("OPAL V2 detected !\n"); } else { diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index c20381caaa3e..d4459bfc92f7 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -78,7 +78,9 @@ static void pnv_show_cpuinfo(struct seq_file *m) if (root) model = of_get_property(root, "model", NULL); seq_printf(m, "machine\t\t: PowerNV %s\n", model); - if (firmware_has_feature(FW_FEATURE_OPALv2)) + if (firmware_has_feature(FW_FEATURE_OPALv3)) + seq_printf(m, "firmware\t: OPAL v3\n"); + else if (firmware_has_feature(FW_FEATURE_OPALv2)) seq_printf(m, "firmware\t: OPAL v2\n"); else if (firmware_has_feature(FW_FEATURE_OPAL)) seq_printf(m, "firmware\t: OPAL v1\n"); -- cgit v1.2.3 From b2b48584dfc69a5ebc70ee7976524d7122e5df5f Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 14 May 2013 15:12:31 +1000 Subject: powerpc/powernv: Fix starting of secondary CPUs on OPALv2 and v3 The current code fails to handle kexec on OPALv2. This fixes it and adds code to improve the situation on OPALv3 where we can query the CPU status from the firmware and decide what to do based on that. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/powernv/smp.c | 62 ++++++++++++++++++++++++++++++++---- 1 file changed, 56 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c index 6a3ecca5b725..88c9459c3e07 100644 --- a/arch/powerpc/platforms/powernv/smp.c +++ b/arch/powerpc/platforms/powernv/smp.c @@ -71,18 +71,68 @@ int pnv_smp_kick_cpu(int nr) BUG_ON(nr < 0 || nr >= NR_CPUS); - /* On OPAL v2 the CPU are still spinning inside OPAL itself, - * get them back now + /* + * If we already started or OPALv2 is not supported, we just + * kick the CPU via the PACA */ - if (!paca[nr].cpu_start && firmware_has_feature(FW_FEATURE_OPALv2)) { - pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", nr, pcpu); - rc = opal_start_cpu(pcpu, start_here); + if (paca[nr].cpu_start || !firmware_has_feature(FW_FEATURE_OPALv2)) + goto kick; + + /* + * At this point, the CPU can either be spinning on the way in + * from kexec or be inside OPAL waiting to be started for the + * first time. OPAL v3 allows us to query OPAL to know if it + * has the CPUs, so we do that + */ + if (firmware_has_feature(FW_FEATURE_OPALv3)) { + uint8_t status; + + rc = opal_query_cpu_status(pcpu, &status); if (rc != OPAL_SUCCESS) { - pr_warn("OPAL Error %ld starting CPU %d\n", + pr_warn("OPAL Error %ld querying CPU %d state\n", rc, nr); return -ENODEV; } + + /* + * Already started, just kick it, probably coming from + * kexec and spinning + */ + if (status == OPAL_THREAD_STARTED) + goto kick; + + /* + * Available/inactive, let's kick it + */ + if (status == OPAL_THREAD_INACTIVE) { + pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", + nr, pcpu); + rc = opal_start_cpu(pcpu, start_here); + if (rc != OPAL_SUCCESS) { + pr_warn("OPAL Error %ld starting CPU %d\n", + rc, nr); + return -ENODEV; + } + } else { + /* + * An unavailable CPU (or any other unknown status) + * shouldn't be started. It should also + * not be in the possible map but currently it can + * happen + */ + pr_devel("OPAL: CPU %d (HW 0x%x) is unavailable" + " (status %d)...\n", nr, pcpu, status); + return -ENODEV; + } + } else { + /* + * On OPAL v2, we just kick it and hope for the best, + * we must not test the error from opal_start_cpu() or + * we would fail to get CPUs from kexec. + */ + opal_start_cpu(pcpu, start_here); } + kick: return smp_generic_kick_cpu(nr); } -- cgit v1.2.3 From ca9d7aea5952c5e90bfe28ed738a7e962c0adad2 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 13 May 2013 00:23:38 +0000 Subject: powerpc: Provide __bswapdi2 Some versions of GCC apparently expect this to be provided by libgcc. Updates from Mikey to fix 32 bit version and adding "r" to registers. Signed-off-by: David Woodhouse Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/misc_32.S | 11 +++++++++++ arch/powerpc/kernel/misc_64.S | 11 +++++++++++ arch/powerpc/kernel/ppc_ksyms.c | 3 ++- 3 files changed, 24 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 19e096bd0e73..e469f30e6eeb 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -657,6 +657,17 @@ _GLOBAL(__ucmpdi2) li r3,2 blr +_GLOBAL(__bswapdi2) + rotlwi r9,r4,8 + rotlwi r10,r3,8 + rlwimi r9,r4,24,0,7 + rlwimi r10,r3,24,0,7 + rlwimi r9,r4,24,16,23 + rlwimi r10,r3,24,16,23 + mr r3,r9 + mr r4,r10 + blr + _GLOBAL(abs) srawi r4,r3,31 xor r3,r3,r4 diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index 5cfa8008693b..6820e45f557b 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -234,6 +234,17 @@ _GLOBAL(__flush_dcache_icache) isync blr +_GLOBAL(__bswapdi2) + srdi r8,r3,32 + rlwinm r7,r3,8,0xffffffff + rlwimi r7,r3,24,0,7 + rlwinm r9,r8,8,0xffffffff + rlwimi r7,r3,24,16,23 + rlwimi r9,r8,24,0,7 + rlwimi r9,r8,24,16,23 + sldi r7,r7,32 + or r3,r7,r9 + blr #if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) /* diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 78b8766fd79e..c29666586998 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -143,7 +143,8 @@ EXPORT_SYMBOL(__lshrdi3); int __ucmpdi2(unsigned long long, unsigned long long); EXPORT_SYMBOL(__ucmpdi2); #endif - +long long __bswapdi2(long long); +EXPORT_SYMBOL(__bswapdi2); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memmove); -- cgit v1.2.3 From dcb615aef988b57deef3d9b4557ff20f681a82b0 Mon Sep 17 00:00:00 2001 From: Alexander Gordeev Date: Mon, 13 May 2013 00:57:49 +0000 Subject: powerpc: Fix irq_set_affinity() return values Signed-off-by: Alexander Gordeev Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/wsp/ics.c | 2 +- arch/powerpc/sysdev/ehv_pic.c | 2 +- arch/powerpc/sysdev/mpic.c | 2 +- arch/powerpc/sysdev/xics/ics-opal.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/wsp/ics.c b/arch/powerpc/platforms/wsp/ics.c index 97fe82ee8633..2d3b1dd9571d 100644 --- a/arch/powerpc/platforms/wsp/ics.c +++ b/arch/powerpc/platforms/wsp/ics.c @@ -361,7 +361,7 @@ static int wsp_chip_set_affinity(struct irq_data *d, xive = xive_set_server(xive, get_irq_server(ics, hw_irq)); wsp_ics_set_xive(ics, hw_irq, xive); - return 0; + return IRQ_SET_MASK_OK; } static struct irq_chip wsp_irq_chip = { diff --git a/arch/powerpc/sysdev/ehv_pic.c b/arch/powerpc/sysdev/ehv_pic.c index 6e0e1005227f..9cd0e60716fe 100644 --- a/arch/powerpc/sysdev/ehv_pic.c +++ b/arch/powerpc/sysdev/ehv_pic.c @@ -81,7 +81,7 @@ int ehv_pic_set_affinity(struct irq_data *d, const struct cpumask *dest, ev_int_set_config(src, config, prio, cpuid); spin_unlock_irqrestore(&ehv_pic_lock, flags); - return 0; + return IRQ_SET_MASK_OK; } static unsigned int ehv_pic_type_to_vecpri(unsigned int type) diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index ee21b5e71aec..0a13ecb270c7 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -836,7 +836,7 @@ int mpic_set_affinity(struct irq_data *d, const struct cpumask *cpumask, mpic_physmask(mask)); } - return 0; + return IRQ_SET_MASK_OK; } static unsigned int mpic_type_to_vecpri(struct mpic *mpic, unsigned int type) diff --git a/arch/powerpc/sysdev/xics/ics-opal.c b/arch/powerpc/sysdev/xics/ics-opal.c index f7e8609df0d5..39d72212655e 100644 --- a/arch/powerpc/sysdev/xics/ics-opal.c +++ b/arch/powerpc/sysdev/xics/ics-opal.c @@ -148,7 +148,7 @@ static int ics_opal_set_affinity(struct irq_data *d, __func__, d->irq, hw_irq, server, rc); return -1; } - return 0; + return IRQ_SET_MASK_OK; } static struct irq_chip ics_opal_irq_chip = { -- cgit v1.2.3 From 6cecf76b47ba6bea3c81d170afc2e0b244e5849c Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Mon, 13 May 2013 14:14:53 +0000 Subject: powerpc/booke64: Fix kernel hangs at kernel_dbg_exc MSR_DE is not cleared on entry to the kernel, and we don't clear it explicitly outside of debug code. If we have MSR_DE set in prime_debug_regs(), and the new thread has events enabled in DBCR0 (e.g. ICMP is set in thread->dbsr0, even though it was cleared in the real DBCR0 when the thread got scheduled out), we'll end up taking a debug exception in the kernel when DBCR0 is loaded. DSRR0 will not point to an exception vector, and the kernel ends up hanging at kernel_dbg_exc. Fix this by always clearing MSR_DE when we load new debug state. Another observed source of kernel_dbg_exc hangs is with the branch taken event. If this event is active, but we take a non-debug trap (e.g. a TLB miss or an asynchronous interrupt) before the next branch. We end up taking a branch-taken debug exception on the initial branch instruction of the exception vector, but because the debug exception is DBSR_BT rather than DBSR_IC we branch to kernel_dbg_exc before even checking the DSRR0 address. Fix this by checking for DBSR_BT as well as DBSR_IC, which is what 32-bit does and what the comments suggest was intended in the 64-bit code as well. Signed-off-by: Scott Wood Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/exceptions-64e.S | 8 ++++---- arch/powerpc/kernel/process.c | 7 +++++++ 2 files changed, 11 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index 42a756eec9ff..645170a07ada 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -489,7 +489,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) */ mfspr r14,SPRN_DBSR /* check single-step/branch taken */ - andis. r15,r14,DBSR_IC@h + andis. r15,r14,(DBSR_IC|DBSR_BT)@h beq+ 1f LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e) @@ -500,7 +500,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) bge+ cr1,1f /* here it looks like we got an inappropriate debug exception. */ - lis r14,DBSR_IC@h /* clear the IC event */ + lis r14,(DBSR_IC|DBSR_BT)@h /* clear the event */ rlwinm r11,r11,0,~MSR_DE /* clear DE in the CSRR1 value */ mtspr SPRN_DBSR,r14 mtspr SPRN_CSRR1,r11 @@ -555,7 +555,7 @@ kernel_dbg_exc: */ mfspr r14,SPRN_DBSR /* check single-step/branch taken */ - andis. r15,r14,DBSR_IC@h + andis. r15,r14,(DBSR_IC|DBSR_BT)@h beq+ 1f LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e) @@ -566,7 +566,7 @@ kernel_dbg_exc: bge+ cr1,1f /* here it looks like we got an inappropriate debug exception. */ - lis r14,DBSR_IC@h /* clear the IC event */ + lis r14,(DBSR_IC|DBSR_BT)@h /* clear the event */ rlwinm r11,r11,0,~MSR_DE /* clear DE in the DSRR1 value */ mtspr SPRN_DBSR,r14 mtspr SPRN_DSRR1,r11 diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 21981a89e394..a902723fdc69 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -339,6 +339,13 @@ static void set_debug_reg_defaults(struct thread_struct *thread) static void prime_debug_regs(struct thread_struct *thread) { + /* + * We could have inherited MSR_DE from userspace, since + * it doesn't get cleared on exception entry. Make sure + * MSR_DE is clear before we enable any debug events. + */ + mtmsr(mfmsr() & ~MSR_DE); + mtspr(SPRN_IAC1, thread->iac1); mtspr(SPRN_IAC2, thread->iac2); #if CONFIG_PPC_ADV_DEBUG_IACS > 2 -- cgit v1.2.3 From 22ecbe8dcef4f6bf80ed4358600e8f6e03105c5c Mon Sep 17 00:00:00 2001 From: Li Zhong Date: Mon, 13 May 2013 16:16:40 +0000 Subject: powerpc: Syscall hooks for context tracking subsystem This is the syscall slow path hooks for context tracking subsystem, corresponding to [PATCH] x86: Syscall hooks for userspace RCU extended QS commit bf5a3c13b939813d28ce26c01425054c740d6731 TIF_MEMDIE is moved to the second 16-bits (with value 17), as it seems there is no asm code using it. TIF_NOHZ is added to _TIF_SYCALL_T_OR_A, so it is better for it to be in the same 16 bits with others in the group, so in the asm code, andi. with this group could work. Signed-off-by: Li Zhong Acked-by: Frederic Weisbecker Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/thread_info.h | 7 +++++-- arch/powerpc/kernel/ptrace.c | 5 +++++ 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h index 8ceea14d6fe4..ba7b1973866e 100644 --- a/arch/powerpc/include/asm/thread_info.h +++ b/arch/powerpc/include/asm/thread_info.h @@ -97,7 +97,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_PERFMON_CTXSW 6 /* perfmon needs ctxsw calls */ #define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ #define TIF_SINGLESTEP 8 /* singlestepping active */ -#define TIF_MEMDIE 9 /* is terminating due to OOM killer */ +#define TIF_NOHZ 9 /* in adaptive nohz mode */ #define TIF_SECCOMP 10 /* secure computing */ #define TIF_RESTOREALL 11 /* Restore all regs (implies NOERROR) */ #define TIF_NOERROR 12 /* Force successful syscall return */ @@ -106,6 +106,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_SYSCALL_TRACEPOINT 15 /* syscall tracepoint instrumentation */ #define TIF_EMULATE_STACK_STORE 16 /* Is an instruction emulation for stack store? */ +#define TIF_MEMDIE 17 /* is terminating due to OOM killer */ /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1< #include #include +#include #include #include @@ -1788,6 +1789,8 @@ long do_syscall_trace_enter(struct pt_regs *regs) { long ret = 0; + user_exit(); + secure_computing_strict(regs->gpr[0]); if (test_thread_flag(TIF_SYSCALL_TRACE) && @@ -1832,4 +1835,6 @@ void do_syscall_trace_leave(struct pt_regs *regs) step = test_thread_flag(TIF_SINGLESTEP); if (step || test_thread_flag(TIF_SYSCALL_TRACE)) tracehook_report_syscall_exit(regs, step); + + user_enter(); } -- cgit v1.2.3 From ba12eedee321eeb5baecaada285daeb3462c35f5 Mon Sep 17 00:00:00 2001 From: Li Zhong Date: Mon, 13 May 2013 16:16:41 +0000 Subject: powerpc: Exception hooks for context tracking subsystem This is the exception hooks for context tracking subsystem, including data access, program check, single step, instruction breakpoint, machine check, alignment, fp unavailable, altivec assist, unknown exception, whose handlers might use RCU. This patch corresponds to [PATCH] x86: Exception hooks for userspace RCU extended QS commit 6ba3c97a38803883c2eee489505796cb0a727122 But after the exception handling moved to generic code, and some changes in following two commits: 56dd9470d7c8734f055da2a6bac553caf4a468eb context_tracking: Move exception handling to generic code 6c1e0256fad84a843d915414e4b5973b7443d48d context_tracking: Restore correct previous context state on exception exit it is able for exception hooks to use the generic code above instead of a redundant arch implementation. Signed-off-by: Li Zhong Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/traps.c | 80 +++++++++++++++++++++++++++++------------ arch/powerpc/mm/fault.c | 41 +++++++++++++-------- arch/powerpc/mm/hash_utils_64.c | 36 ++++++++++++++----- 3 files changed, 112 insertions(+), 45 deletions(-) diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 83efa2f7d926..a7a648f6b750 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -667,6 +668,7 @@ int machine_check_generic(struct pt_regs *regs) void machine_check_exception(struct pt_regs *regs) { + enum ctx_state prev_state = exception_enter(); int recover = 0; __get_cpu_var(irq_stat).mce_exceptions++; @@ -683,7 +685,7 @@ void machine_check_exception(struct pt_regs *regs) recover = cur_cpu_spec->machine_check(regs); if (recover > 0) - return; + goto bail; #if defined(CONFIG_8xx) && defined(CONFIG_PCI) /* the qspan pci read routines can cause machine checks -- Cort @@ -693,20 +695,23 @@ void machine_check_exception(struct pt_regs *regs) * -- BenH */ bad_page_fault(regs, regs->dar, SIGBUS); - return; + goto bail; #endif if (debugger_fault_handler(regs)) - return; + goto bail; if (check_io_access(regs)) - return; + goto bail; die("Machine check", regs, SIGBUS); /* Must die if the interrupt is not recoverable */ if (!(regs->msr & MSR_RI)) panic("Unrecoverable Machine check"); + +bail: + exception_exit(prev_state); } void SMIException(struct pt_regs *regs) @@ -716,20 +721,29 @@ void SMIException(struct pt_regs *regs) void unknown_exception(struct pt_regs *regs) { + enum ctx_state prev_state = exception_enter(); + printk("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", regs->nip, regs->msr, regs->trap); _exception(SIGTRAP, regs, 0, 0); + + exception_exit(prev_state); } void instruction_breakpoint_exception(struct pt_regs *regs) { + enum ctx_state prev_state = exception_enter(); + if (notify_die(DIE_IABR_MATCH, "iabr_match", regs, 5, 5, SIGTRAP) == NOTIFY_STOP) - return; + goto bail; if (debugger_iabr_match(regs)) - return; + goto bail; _exception(SIGTRAP, regs, TRAP_BRKPT, regs->nip); + +bail: + exception_exit(prev_state); } void RunModeException(struct pt_regs *regs) @@ -739,15 +753,20 @@ void RunModeException(struct pt_regs *regs) void __kprobes single_step_exception(struct pt_regs *regs) { + enum ctx_state prev_state = exception_enter(); + clear_single_step(regs); if (notify_die(DIE_SSTEP, "single_step", regs, 5, 5, SIGTRAP) == NOTIFY_STOP) - return; + goto bail; if (debugger_sstep(regs)) - return; + goto bail; _exception(SIGTRAP, regs, TRAP_TRACE, regs->nip); + +bail: + exception_exit(prev_state); } /* @@ -1005,6 +1024,7 @@ int is_valid_bugaddr(unsigned long addr) void __kprobes program_check_exception(struct pt_regs *regs) { + enum ctx_state prev_state = exception_enter(); unsigned int reason = get_reason(regs); extern int do_mathemu(struct pt_regs *regs); @@ -1014,26 +1034,26 @@ void __kprobes program_check_exception(struct pt_regs *regs) if (reason & REASON_FP) { /* IEEE FP exception */ parse_fpe(regs); - return; + goto bail; } if (reason & REASON_TRAP) { /* Debugger is first in line to stop recursive faults in * rcu_lock, notify_die, or atomic_notifier_call_chain */ if (debugger_bpt(regs)) - return; + goto bail; /* trap exception */ if (notify_die(DIE_BPT, "breakpoint", regs, 5, 5, SIGTRAP) == NOTIFY_STOP) - return; + goto bail; if (!(regs->msr & MSR_PR) && /* not user-mode */ report_bug(regs->nip, regs) == BUG_TRAP_TYPE_WARN) { regs->nip += 4; - return; + goto bail; } _exception(SIGTRAP, regs, TRAP_BRKPT, regs->nip); - return; + goto bail; } #ifdef CONFIG_PPC_TRANSACTIONAL_MEM if (reason & REASON_TM) { @@ -1049,7 +1069,7 @@ void __kprobes program_check_exception(struct pt_regs *regs) if (!user_mode(regs) && report_bug(regs->nip, regs) == BUG_TRAP_TYPE_WARN) { regs->nip += 4; - return; + goto bail; } /* If usermode caused this, it's done something illegal and * gets a SIGILL slap on the wrist. We call it an illegal @@ -1059,7 +1079,7 @@ void __kprobes program_check_exception(struct pt_regs *regs) */ if (user_mode(regs)) { _exception(SIGILL, regs, ILL_ILLOPN, regs->nip); - return; + goto bail; } else { printk(KERN_EMERG "Unexpected TM Bad Thing exception " "at %lx (msr 0x%x)\n", regs->nip, reason); @@ -1083,16 +1103,16 @@ void __kprobes program_check_exception(struct pt_regs *regs) switch (do_mathemu(regs)) { case 0: emulate_single_step(regs); - return; + goto bail; case 1: { int code = 0; code = __parse_fpscr(current->thread.fpscr.val); _exception(SIGFPE, regs, code, regs->nip); - return; + goto bail; } case -EFAULT: _exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip); - return; + goto bail; } /* fall through on any other errors */ #endif /* CONFIG_MATH_EMULATION */ @@ -1103,10 +1123,10 @@ void __kprobes program_check_exception(struct pt_regs *regs) case 0: regs->nip += 4; emulate_single_step(regs); - return; + goto bail; case -EFAULT: _exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip); - return; + goto bail; } } @@ -1114,10 +1134,14 @@ void __kprobes program_check_exception(struct pt_regs *regs) _exception(SIGILL, regs, ILL_PRVOPC, regs->nip); else _exception(SIGILL, regs, ILL_ILLOPC, regs->nip); + +bail: + exception_exit(prev_state); } void alignment_exception(struct pt_regs *regs) { + enum ctx_state prev_state = exception_enter(); int sig, code, fixed = 0; /* We restore the interrupt state now */ @@ -1131,7 +1155,7 @@ void alignment_exception(struct pt_regs *regs) if (fixed == 1) { regs->nip += 4; /* skip over emulated instruction */ emulate_single_step(regs); - return; + goto bail; } /* Operand address was bad */ @@ -1146,6 +1170,9 @@ void alignment_exception(struct pt_regs *regs) _exception(sig, regs, code, regs->dar); else bad_page_fault(regs, regs->dar, sig); + +bail: + exception_exit(prev_state); } void StackOverflow(struct pt_regs *regs) @@ -1174,23 +1201,32 @@ void trace_syscall(struct pt_regs *regs) void kernel_fp_unavailable_exception(struct pt_regs *regs) { + enum ctx_state prev_state = exception_enter(); + printk(KERN_EMERG "Unrecoverable FP Unavailable Exception " "%lx at %lx\n", regs->trap, regs->nip); die("Unrecoverable FP Unavailable Exception", regs, SIGABRT); + + exception_exit(prev_state); } void altivec_unavailable_exception(struct pt_regs *regs) { + enum ctx_state prev_state = exception_enter(); + if (user_mode(regs)) { /* A user program has executed an altivec instruction, but this kernel doesn't support altivec. */ _exception(SIGILL, regs, ILL_ILLOPC, regs->nip); - return; + goto bail; } printk(KERN_EMERG "Unrecoverable VMX/Altivec Unavailable Exception " "%lx at %lx\n", regs->trap, regs->nip); die("Unrecoverable VMX/Altivec Unavailable Exception", regs, SIGABRT); + +bail: + exception_exit(prev_state); } void vsx_unavailable_exception(struct pt_regs *regs) diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 229951ffc351..8726779e1409 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include @@ -196,6 +197,7 @@ static int mm_fault_error(struct pt_regs *regs, unsigned long addr, int fault) int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, unsigned long error_code) { + enum ctx_state prev_state = exception_enter(); struct vm_area_struct * vma; struct mm_struct *mm = current->mm; unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; @@ -204,6 +206,7 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, int trap = TRAP(regs); int is_exec = trap == 0x400; int fault; + int rc = 0; #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) /* @@ -230,28 +233,30 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, * look at it */ if (error_code & ICSWX_DSI_UCT) { - int rc = acop_handle_fault(regs, address, error_code); + rc = acop_handle_fault(regs, address, error_code); if (rc) - return rc; + goto bail; } #endif /* CONFIG_PPC_ICSWX */ if (notify_page_fault(regs)) - return 0; + goto bail; if (unlikely(debugger_fault_handler(regs))) - return 0; + goto bail; /* On a kernel SLB miss we can only check for a valid exception entry */ - if (!user_mode(regs) && (address >= TASK_SIZE)) - return SIGSEGV; + if (!user_mode(regs) && (address >= TASK_SIZE)) { + rc = SIGSEGV; + goto bail; + } #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE) || \ defined(CONFIG_PPC_BOOK3S_64)) if (error_code & DSISR_DABRMATCH) { /* breakpoint match */ do_break(regs, address, error_code); - return 0; + goto bail; } #endif @@ -260,8 +265,10 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, local_irq_enable(); if (in_atomic() || mm == NULL) { - if (!user_mode(regs)) - return SIGSEGV; + if (!user_mode(regs)) { + rc = SIGSEGV; + goto bail; + } /* in_atomic() in user mode is really bad, as is current->mm == NULL. */ printk(KERN_EMERG "Page fault in user mode with " @@ -417,9 +424,11 @@ good_area: */ fault = handle_mm_fault(mm, vma, address, flags); if (unlikely(fault & (VM_FAULT_RETRY|VM_FAULT_ERROR))) { - int rc = mm_fault_error(regs, address, fault); + rc = mm_fault_error(regs, address, fault); if (rc >= MM_FAULT_RETURN) - return rc; + goto bail; + else + rc = 0; } /* @@ -454,7 +463,7 @@ good_area: } up_read(&mm->mmap_sem); - return 0; + goto bail; bad_area: up_read(&mm->mmap_sem); @@ -463,7 +472,7 @@ bad_area_nosemaphore: /* User mode accesses cause a SIGSEGV */ if (user_mode(regs)) { _exception(SIGSEGV, regs, code, address); - return 0; + goto bail; } if (is_exec && (error_code & DSISR_PROTFAULT)) @@ -471,7 +480,11 @@ bad_area_nosemaphore: " page (%lx) - exploit attempt? (uid: %d)\n", address, from_kuid(&init_user_ns, current_uid())); - return SIGSEGV; + rc = SIGSEGV; + +bail: + exception_exit(prev_state); + return rc; } diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 88ac0eeaadde..e303a6d74e3a 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -954,6 +955,7 @@ void hash_failure_debug(unsigned long ea, unsigned long access, */ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) { + enum ctx_state prev_state = exception_enter(); pgd_t *pgdir; unsigned long vsid; struct mm_struct *mm; @@ -973,7 +975,8 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) mm = current->mm; if (! mm) { DBG_LOW(" user region with no mm !\n"); - return 1; + rc = 1; + goto bail; } psize = get_slice_psize(mm, ea); ssize = user_segment_size(ea); @@ -992,19 +995,23 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) /* Not a valid range * Send the problem up to do_page_fault */ - return 1; + rc = 1; + goto bail; } DBG_LOW(" mm=%p, mm->pgdir=%p, vsid=%016lx\n", mm, mm->pgd, vsid); /* Bad address. */ if (!vsid) { DBG_LOW("Bad address!\n"); - return 1; + rc = 1; + goto bail; } /* Get pgdir */ pgdir = mm->pgd; - if (pgdir == NULL) - return 1; + if (pgdir == NULL) { + rc = 1; + goto bail; + } /* Check CPU locality */ tmp = cpumask_of(smp_processor_id()); @@ -1027,7 +1034,8 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) ptep = find_linux_pte_or_hugepte(pgdir, ea, &hugeshift); if (ptep == NULL || !pte_present(*ptep)) { DBG_LOW(" no PTE !\n"); - return 1; + rc = 1; + goto bail; } /* Add _PAGE_PRESENT to the required access perm */ @@ -1038,13 +1046,16 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) */ if (access & ~pte_val(*ptep)) { DBG_LOW(" no access !\n"); - return 1; + rc = 1; + goto bail; } #ifdef CONFIG_HUGETLB_PAGE - if (hugeshift) - return __hash_page_huge(ea, access, vsid, ptep, trap, local, + if (hugeshift) { + rc = __hash_page_huge(ea, access, vsid, ptep, trap, local, ssize, hugeshift, psize); + goto bail; + } #endif /* CONFIG_HUGETLB_PAGE */ #ifndef CONFIG_PPC_64K_PAGES @@ -1124,6 +1135,9 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) pte_val(*(ptep + PTRS_PER_PTE))); #endif DBG_LOW(" -> rc=%d\n", rc); + +bail: + exception_exit(prev_state); return rc; } EXPORT_SYMBOL_GPL(hash_page); @@ -1259,6 +1273,8 @@ void flush_hash_range(unsigned long number, int local) */ void low_hash_fault(struct pt_regs *regs, unsigned long address, int rc) { + enum ctx_state prev_state = exception_enter(); + if (user_mode(regs)) { #ifdef CONFIG_PPC_SUBPAGE_PROT if (rc == -2) @@ -1268,6 +1284,8 @@ void low_hash_fault(struct pt_regs *regs, unsigned long address, int rc) _exception(SIGBUS, regs, BUS_ADRERR, address); } else bad_page_fault(regs, address, SIGBUS); + + exception_exit(prev_state); } long hpte_insert_repeating(unsigned long hash, unsigned long vpn, -- cgit v1.2.3 From 106ed886abc46723c290e82e5f161d9b40820203 Mon Sep 17 00:00:00 2001 From: Li Zhong Date: Mon, 13 May 2013 16:16:42 +0000 Subject: powerpc: Exit user context on notify resume This patch allows RCU usage in do_notify_resume, e.g. signal handling. It corresponds to [PATCH] x86: Exit RCU extended QS on notify resume commit edf55fda35c7dc7f2d9241c3abaddaf759b457c6 Signed-off-by: Li Zhong Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/signal.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index cf12eae02de5..d63b5024c563 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -159,6 +160,8 @@ static int do_signal(struct pt_regs *regs) void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags) { + user_exit(); + if (thread_info_flags & _TIF_UPROBE) uprobe_notify_resume(regs); @@ -169,4 +172,6 @@ void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags) clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); } + + user_enter(); } -- cgit v1.2.3 From 5d1c57451154047ab31aadfbc712bb8aa174bfb3 Mon Sep 17 00:00:00 2001 From: Li Zhong Date: Mon, 13 May 2013 16:16:43 +0000 Subject: powerpc: Use the new schedule_user API on userspace preemption This patch corresponds to [PATCH] x86: Use the new schedule_user API on userspace preemption commit 0430499ce9d78691f3985962021b16bf8f8a8048 Signed-off-by: Li Zhong Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/context_tracking.h | 10 ++++++++++ arch/powerpc/kernel/entry_64.S | 3 ++- 2 files changed, 12 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/include/asm/context_tracking.h diff --git a/arch/powerpc/include/asm/context_tracking.h b/arch/powerpc/include/asm/context_tracking.h new file mode 100644 index 000000000000..b6f5a33b8ee2 --- /dev/null +++ b/arch/powerpc/include/asm/context_tracking.h @@ -0,0 +1,10 @@ +#ifndef _ASM_POWERPC_CONTEXT_TRACKING_H +#define _ASM_POWERPC_CONTEXT_TRACKING_H + +#ifdef CONFIG_CONTEXT_TRACKING +#define SCHEDULE_USER bl .schedule_user +#else +#define SCHEDULE_USER bl .schedule +#endif + +#endif diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 48e8a86e7cb2..794889b588cd 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -33,6 +33,7 @@ #include #include #include +#include /* * System calls. @@ -632,7 +633,7 @@ _GLOBAL(ret_from_except_lite) andi. r0,r4,_TIF_NEED_RESCHED beq 1f bl .restore_interrupts - bl .schedule + SCHEDULE_USER b .ret_from_except_lite 1: bl .save_nvgprs -- cgit v1.2.3 From a1797b2fd2051515689fd54a9db8fd20ebd5e5f7 Mon Sep 17 00:00:00 2001 From: Li Zhong Date: Mon, 13 May 2013 16:16:44 +0000 Subject: powerpc: select HAVE_CONTEXT_TRACKING for pSeries Start context tracking support from pSeries. Signed-off-by: Li Zhong Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 9a0941bc4d31..023b288f895b 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -18,6 +18,7 @@ config PPC_PSERIES select PPC_PCI_CHOICE if EXPERT select ZLIB_DEFLATE select PPC_DOORBELL + select HAVE_CONTEXT_TRACKING default y config PPC_SPLPAR -- cgit v1.2.3 From d52f2dc40b52201700001e868093c5ec827a8f33 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 13 May 2013 18:44:56 +0000 Subject: powerpc/perf: Move BHRB code into CONFIG_PPC64 region The new Branch History Rolling buffer (BHRB) code is only useful on 64bit processors, so move it into the #ifdef CONFIG_PPC64 region. This avoids code bloat on 32bit systems. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/core-book3s.c | 248 ++++++++++++++++++++-------------------- 1 file changed, 127 insertions(+), 121 deletions(-) diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index c627843c5b2e..843bb8be8380 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -100,6 +100,10 @@ static inline int siar_valid(struct pt_regs *regs) return 1; } +static inline void power_pmu_bhrb_enable(struct perf_event *event) {} +static inline void power_pmu_bhrb_disable(struct perf_event *event) {} +void power_pmu_flush_branch_stack(void) {} +static inline void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) {} #endif /* CONFIG_PPC32 */ static bool regs_use_siar(struct pt_regs *regs) @@ -308,6 +312,129 @@ static inline int siar_valid(struct pt_regs *regs) return 1; } + +/* Reset all possible BHRB entries */ +static void power_pmu_bhrb_reset(void) +{ + asm volatile(PPC_CLRBHRB); +} + +static void power_pmu_bhrb_enable(struct perf_event *event) +{ + struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events); + + if (!ppmu->bhrb_nr) + return; + + /* Clear BHRB if we changed task context to avoid data leaks */ + if (event->ctx->task && cpuhw->bhrb_context != event->ctx) { + power_pmu_bhrb_reset(); + cpuhw->bhrb_context = event->ctx; + } + cpuhw->bhrb_users++; +} + +static void power_pmu_bhrb_disable(struct perf_event *event) +{ + struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events); + + if (!ppmu->bhrb_nr) + return; + + cpuhw->bhrb_users--; + WARN_ON_ONCE(cpuhw->bhrb_users < 0); + + if (!cpuhw->disabled && !cpuhw->bhrb_users) { + /* BHRB cannot be turned off when other + * events are active on the PMU. + */ + + /* avoid stale pointer */ + cpuhw->bhrb_context = NULL; + } +} + +/* Called from ctxsw to prevent one process's branch entries to + * mingle with the other process's entries during context switch. + */ +void power_pmu_flush_branch_stack(void) +{ + if (ppmu->bhrb_nr) + power_pmu_bhrb_reset(); +} + + +/* Processing BHRB entries */ +static void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) +{ + u64 val; + u64 addr; + int r_index, u_index, target, pred; + + r_index = 0; + u_index = 0; + while (r_index < ppmu->bhrb_nr) { + /* Assembly read function */ + val = read_bhrb(r_index); + + /* Terminal marker: End of valid BHRB entries */ + if (val == 0) { + break; + } else { + /* BHRB field break up */ + addr = val & BHRB_EA; + pred = val & BHRB_PREDICTION; + target = val & BHRB_TARGET; + + /* Probable Missed entry: Not applicable for POWER8 */ + if ((addr == 0) && (target == 0) && (pred == 1)) { + r_index++; + continue; + } + + /* Real Missed entry: Power8 based missed entry */ + if ((addr == 0) && (target == 1) && (pred == 1)) { + r_index++; + continue; + } + + /* Reserved condition: Not a valid entry */ + if ((addr == 0) && (target == 1) && (pred == 0)) { + r_index++; + continue; + } + + /* Is a target address */ + if (val & BHRB_TARGET) { + /* First address cannot be a target address */ + if (r_index == 0) { + r_index++; + continue; + } + + /* Update target address for the previous entry */ + cpuhw->bhrb_entries[u_index - 1].to = addr; + cpuhw->bhrb_entries[u_index - 1].mispred = pred; + cpuhw->bhrb_entries[u_index - 1].predicted = ~pred; + + /* Dont increment u_index */ + r_index++; + } else { + /* Update address, flags for current entry */ + cpuhw->bhrb_entries[u_index].from = addr; + cpuhw->bhrb_entries[u_index].mispred = pred; + cpuhw->bhrb_entries[u_index].predicted = ~pred; + + /* Successfully popullated one entry */ + u_index++; + r_index++; + } + } + } + cpuhw->bhrb_stack.nr = u_index; + return; +} + #endif /* CONFIG_PPC64 */ static void perf_event_interrupt(struct pt_regs *regs); @@ -904,47 +1031,6 @@ static int collect_events(struct perf_event *group, int max_count, return n; } -/* Reset all possible BHRB entries */ -static void power_pmu_bhrb_reset(void) -{ - asm volatile(PPC_CLRBHRB); -} - -void power_pmu_bhrb_enable(struct perf_event *event) -{ - struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events); - - if (!ppmu->bhrb_nr) - return; - - /* Clear BHRB if we changed task context to avoid data leaks */ - if (event->ctx->task && cpuhw->bhrb_context != event->ctx) { - power_pmu_bhrb_reset(); - cpuhw->bhrb_context = event->ctx; - } - cpuhw->bhrb_users++; -} - -void power_pmu_bhrb_disable(struct perf_event *event) -{ - struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events); - - if (!ppmu->bhrb_nr) - return; - - cpuhw->bhrb_users--; - WARN_ON_ONCE(cpuhw->bhrb_users < 0); - - if (!cpuhw->disabled && !cpuhw->bhrb_users) { - /* BHRB cannot be turned off when other - * events are active on the PMU. - */ - - /* avoid stale pointer */ - cpuhw->bhrb_context = NULL; - } -} - /* * Add a event to the PMU. * If all events are not already frozen, then we disable and @@ -1180,15 +1266,6 @@ int power_pmu_commit_txn(struct pmu *pmu) return 0; } -/* Called from ctxsw to prevent one process's branch entries to - * mingle with the other process's entries during context switch. - */ -void power_pmu_flush_branch_stack(void) -{ - if (ppmu->bhrb_nr) - power_pmu_bhrb_reset(); -} - /* * Return 1 if we might be able to put event on a limited PMC, * or 0 if not. @@ -1458,77 +1535,6 @@ struct pmu power_pmu = { .flush_branch_stack = power_pmu_flush_branch_stack, }; -/* Processing BHRB entries */ -void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) -{ - u64 val; - u64 addr; - int r_index, u_index, target, pred; - - r_index = 0; - u_index = 0; - while (r_index < ppmu->bhrb_nr) { - /* Assembly read function */ - val = read_bhrb(r_index); - - /* Terminal marker: End of valid BHRB entries */ - if (val == 0) { - break; - } else { - /* BHRB field break up */ - addr = val & BHRB_EA; - pred = val & BHRB_PREDICTION; - target = val & BHRB_TARGET; - - /* Probable Missed entry: Not applicable for POWER8 */ - if ((addr == 0) && (target == 0) && (pred == 1)) { - r_index++; - continue; - } - - /* Real Missed entry: Power8 based missed entry */ - if ((addr == 0) && (target == 1) && (pred == 1)) { - r_index++; - continue; - } - - /* Reserved condition: Not a valid entry */ - if ((addr == 0) && (target == 1) && (pred == 0)) { - r_index++; - continue; - } - - /* Is a target address */ - if (val & BHRB_TARGET) { - /* First address cannot be a target address */ - if (r_index == 0) { - r_index++; - continue; - } - - /* Update target address for the previous entry */ - cpuhw->bhrb_entries[u_index - 1].to = addr; - cpuhw->bhrb_entries[u_index - 1].mispred = pred; - cpuhw->bhrb_entries[u_index - 1].predicted = ~pred; - - /* Dont increment u_index */ - r_index++; - } else { - /* Update address, flags for current entry */ - cpuhw->bhrb_entries[u_index].from = addr; - cpuhw->bhrb_entries[u_index].mispred = pred; - cpuhw->bhrb_entries[u_index].predicted = ~pred; - - /* Successfully popullated one entry */ - u_index++; - r_index++; - } - } - } - cpuhw->bhrb_stack.nr = u_index; - return; -} - /* * A counter has overflowed; update its count and record * things if requested. Note that interrupts are hard-disabled -- cgit v1.2.3 From 506e70d13236dfdb0bc15e0914298ab0a7b7f4df Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 13 May 2013 18:44:57 +0000 Subject: powerpc/pmu: Fix order of interpreting BHRB target entries The current Branch History Rolling Buffer (BHRB) code misinterprets the order of entries in the hardware buffer. It assumes that a branch target address will be read _after_ its corresponding branch. In reality the branch target comes before (lower mfbhrb entry) it's corresponding branch. This is a rewrite of the code to take this into account. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/core-book3s.c | 89 +++++++++++++++++++++-------------------- 1 file changed, 46 insertions(+), 43 deletions(-) diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 843bb8be8380..3fdfe4575b8f 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -363,72 +363,75 @@ void power_pmu_flush_branch_stack(void) power_pmu_bhrb_reset(); } - /* Processing BHRB entries */ -static void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) +void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) { u64 val; u64 addr; - int r_index, u_index, target, pred; + int r_index, u_index, pred; r_index = 0; u_index = 0; while (r_index < ppmu->bhrb_nr) { /* Assembly read function */ - val = read_bhrb(r_index); - - /* Terminal marker: End of valid BHRB entries */ - if (val == 0) { + val = read_bhrb(r_index++); + if (!val) + /* Terminal marker: End of valid BHRB entries */ break; - } else { - /* BHRB field break up */ + else { addr = val & BHRB_EA; pred = val & BHRB_PREDICTION; - target = val & BHRB_TARGET; - /* Probable Missed entry: Not applicable for POWER8 */ - if ((addr == 0) && (target == 0) && (pred == 1)) { - r_index++; + if (!addr) + /* invalid entry */ continue; - } - /* Real Missed entry: Power8 based missed entry */ - if ((addr == 0) && (target == 1) && (pred == 1)) { - r_index++; - continue; - } - - /* Reserved condition: Not a valid entry */ - if ((addr == 0) && (target == 1) && (pred == 0)) { - r_index++; - continue; - } + /* Branches are read most recent first (ie. mfbhrb 0 is + * the most recent branch). + * There are two types of valid entries: + * 1) a target entry which is the to address of a + * computed goto like a blr,bctr,btar. The next + * entry read from the bhrb will be branch + * corresponding to this target (ie. the actual + * blr/bctr/btar instruction). + * 2) a from address which is an actual branch. If a + * target entry proceeds this, then this is the + * matching branch for that target. If this is not + * following a target entry, then this is a branch + * where the target is given as an immediate field + * in the instruction (ie. an i or b form branch). + * In this case we need to read the instruction from + * memory to determine the target/to address. + */ - /* Is a target address */ if (val & BHRB_TARGET) { - /* First address cannot be a target address */ - if (r_index == 0) { - r_index++; - continue; - } - - /* Update target address for the previous entry */ - cpuhw->bhrb_entries[u_index - 1].to = addr; - cpuhw->bhrb_entries[u_index - 1].mispred = pred; - cpuhw->bhrb_entries[u_index - 1].predicted = ~pred; + /* Target branches use two entries + * (ie. computed gotos/XL form) + */ + cpuhw->bhrb_entries[u_index].to = addr; + cpuhw->bhrb_entries[u_index].mispred = pred; + cpuhw->bhrb_entries[u_index].predicted = ~pred; - /* Dont increment u_index */ - r_index++; + /* Get from address in next entry */ + val = read_bhrb(r_index++); + addr = val & BHRB_EA; + if (val & BHRB_TARGET) { + /* Shouldn't have two targets in a + row.. Reset index and try again */ + r_index--; + addr = 0; + } + cpuhw->bhrb_entries[u_index].from = addr; } else { - /* Update address, flags for current entry */ + /* Branches to immediate field + (ie I or B form) */ cpuhw->bhrb_entries[u_index].from = addr; + cpuhw->bhrb_entries[u_index].to = 0; cpuhw->bhrb_entries[u_index].mispred = pred; cpuhw->bhrb_entries[u_index].predicted = ~pred; - - /* Successfully popullated one entry */ - u_index++; - r_index++; } + u_index++; + } } cpuhw->bhrb_stack.nr = u_index; -- cgit v1.2.3 From 691231846cebfe1fbbcf898c8af17a569dbb5463 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 13 May 2013 18:44:58 +0000 Subject: powerpc/perf: Fix setting of "to" addresses for BHRB Currently we only set the "to" address in the branch stack when the CPU explicitly gives us a value. Unfortunately it only does this for XL form branches (eg blr, bctr, bctar) and not I and B form branches (eg b, bc). Fortunately if we read the instruction from memory we can extract the offset of a branch and calculate the target address. This adds a function power_pmu_bhrb_to() to calculate the target/to address of the corresponding I and B form branches. It handles branches in both user and kernel spaces. It also plumbs this into the perf brhb reading code. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/core-book3s.c | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 3fdfe4575b8f..426180b84978 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -13,11 +13,13 @@ #include #include #include +#include #include #include #include #include #include +#include #define BHRB_MAX_ENTRIES 32 #define BHRB_TARGET 0x0000000000000002 @@ -362,6 +364,32 @@ void power_pmu_flush_branch_stack(void) if (ppmu->bhrb_nr) power_pmu_bhrb_reset(); } +/* Calculate the to address for a branch */ +static __u64 power_pmu_bhrb_to(u64 addr) +{ + unsigned int instr; + int ret; + __u64 target; + + if (is_kernel_addr(addr)) + return branch_target((unsigned int *)addr); + + /* Userspace: need copy instruction here then translate it */ + pagefault_disable(); + ret = __get_user_inatomic(instr, (unsigned int __user *)addr); + if (ret) { + pagefault_enable(); + return 0; + } + pagefault_enable(); + + target = branch_target(&instr); + if ((!target) || (instr & BRANCH_ABSOLUTE)) + return target; + + /* Translate relative branch target from kernel to user address */ + return target - (unsigned long)&instr + addr; +} /* Processing BHRB entries */ void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) @@ -426,7 +454,8 @@ void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) /* Branches to immediate field (ie I or B form) */ cpuhw->bhrb_entries[u_index].from = addr; - cpuhw->bhrb_entries[u_index].to = 0; + cpuhw->bhrb_entries[u_index].to = + power_pmu_bhrb_to(addr); cpuhw->bhrb_entries[u_index].mispred = pred; cpuhw->bhrb_entries[u_index].predicted = ~pred; } -- cgit v1.2.3 From e34166ad63eac4d0fa98b4c4ed7a98202a18faef Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 14 May 2013 17:02:11 +1000 Subject: powerpc: Set show_unhandled_signals to 1 by default Just like other architectures Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/signal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index d63b5024c563..577a8aa69c6e 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -25,7 +25,7 @@ * through debug.exception-trace sysctl. */ -int show_unhandled_signals = 0; +int show_unhandled_signals = 1; /* * Allocate space for the signal frame -- cgit v1.2.3 From 3210c05327e2b44b3bf96bab550d72cdb18b64e4 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:01 +0100 Subject: ARM: ux500: Remove duplicated assignment of ab8500_platdata Since: "05ec260 mfd: db8500-prcmu: update resource passing", the AB8500's platform data 'ab8500_platdata' is passed directly as an attribute to 'db8500_prcmu_pdata', so there's no requirement to assign it a second time. In fact, it's only due to an ordering issue that the entire 'db8500_prcmu_pdata' data structure isn't completely over-written by the assignment in u8500_init_devices(). Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 6 +++--- arch/arm/mach-ux500/cpu-db8500.c | 4 +--- arch/arm/mach-ux500/setup.h | 2 +- 3 files changed, 5 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 3cd555ac6d0a..78389de94dde 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -623,7 +623,7 @@ static void __init mop500_init_machine(void) sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL; mop500_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; @@ -660,7 +660,7 @@ static void __init snowball_init_machine(void) sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO; snowball_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) snowball_platform_devs[i]->dev.parent = parent; @@ -698,7 +698,7 @@ static void __init hrefv60_init_machine(void) sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO; hrefv60_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index e90b5ab23b6d..8894327283e1 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -206,7 +206,7 @@ static struct device * __init db8500_soc_device_init(void) /* * This function is called from the board init */ -struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) +struct device * __init u8500_init_devices(void) { struct device *parent; int i; @@ -220,8 +220,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; - db8500_prcmu_device.dev.platform_data = ab8500; - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); return parent; diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index bddce2b49372..cad3ca86c540 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -18,7 +18,7 @@ void __init ux500_map_io(void); extern void __init u8500_map_io(void); -extern struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500); +extern struct device * __init u8500_init_devices(void); extern void __init ux500_init_irq(void); extern void __init ux500_init_late(void); -- cgit v1.2.3 From ea63a11027103372f56bd2d9ee3c525be6edc9c1 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:05 +0100 Subject: ARM: ux500: Fix incorrect DEBUG UART virtual addresses A recent move to rid header files which were hindering multiplatform support forced address allocations out of the headers and into the files which were using them. We also lost some useful macros such as IO_ADDRESS(), so physical -> virtual addressing has been carried out manually in this case. Unfortunately the incorrect value was converted. This patch rectifies the error and ensures earlyprintk works again. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/include/debug/ux500.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S index 2848857f5b62..fbd24beeb1fa 100644 --- a/arch/arm/include/debug/ux500.S +++ b/arch/arm/include/debug/ux500.S @@ -24,9 +24,9 @@ #define U8500_UART0_PHYS_BASE (0x80120000) #define U8500_UART1_PHYS_BASE (0x80121000) #define U8500_UART2_PHYS_BASE (0x80007000) -#define U8500_UART0_VIRT_BASE (0xa8120000) -#define U8500_UART1_VIRT_BASE (0xa8121000) -#define U8500_UART2_VIRT_BASE (0xa8007000) +#define U8500_UART0_VIRT_BASE (0xf8120000) +#define U8500_UART1_VIRT_BASE (0xf8121000) +#define U8500_UART2_VIRT_BASE (0xf8007000) #define __UX500_PHYS_UART(n) U8500_UART##n##_PHYS_BASE #define __UX500_VIRT_UART(n) U8500_UART##n##_VIRT_BASE #endif -- cgit v1.2.3 From 7d2b64f9832d7cb971141703219b3dc495bb9332 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:06 +0100 Subject: ARM: ux500: Provide device enumeration number suffix for SMSC911x First Ethernet device has a ".0" appended onto the device name. Since on a non-DT boot the ethernet will be named "smsc911x.0" and since the clocks are not converted to device tree these names need to be matched when providing the name from auxdata. Signed-off-by: Lee Jones [edited commit message] Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db8500.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 8894327283e1..46cca52890bc 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -276,7 +276,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", &db8500_prcmu_pdata), - OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x", NULL), + OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL), /* Requires device name bindings. */ OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE, "pinctrl-db8500", NULL), -- cgit v1.2.3 From 2fcad12eb4d80b174c69bfbc34d1c094ad37e1bd Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:07 +0100 Subject: pinctrl: abx500: Specify failed sub-driver by ID instead of driver_data If a sub-driver has not been specified correctly, there is a good chance that plat_id is NULL, hence using an attribute of plat_id in the error message is likely to not only fail the driver but Oops the kernel. Use the failed ID instead. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-abx500.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c index aa17f7580f61..2a2a9df90bba 100644 --- a/drivers/pinctrl/pinctrl-abx500.c +++ b/drivers/pinctrl/pinctrl-abx500.c @@ -900,8 +900,7 @@ static int abx500_gpio_probe(struct platform_device *pdev) abx500_pinctrl_ab8505_init(&pct->soc); break; default: - dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n", - (int) platid->driver_data); + dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n", id); mutex_destroy(&pct->lock); return -EINVAL; } -- cgit v1.2.3 From 86c976e43da417e341bee30ee734b89743ebe7e8 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:08 +0100 Subject: pinctrl: abx500: Rejiggle platform data and DT initialisation Platform Data is invariably populated for this driver, even when booting with Device Tree. Thus the Device Tree probing code encased within the first check for Platform Data will never executed, causing the driver to fail when DT is enabled. This patch fixes the aforementioned regression by rejigging the probe() semantics to attempt to extract a platform ID from Device Tree if one can not be sourced from platform data. A pointer to GPIO platform data is always passed to the driver now, so there's little point in checking for 'pdata' and executing the DT case if it's not there. The difference between booting with DT and !DT is when booting with DT, plat_id is not populated. Thus, in the DT case we have to use a DT match table in order to find out which platform we're executing on. So, we're changing the semantics here to only use the match table if no plat_id is supplied though platform data. Signed-off-by: Lee Jones [edited commit message] Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-abx500.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c index 2a2a9df90bba..6d4532702f80 100644 --- a/drivers/pinctrl/pinctrl-abx500.c +++ b/drivers/pinctrl/pinctrl-abx500.c @@ -851,23 +851,12 @@ static int abx500_gpio_probe(struct platform_device *pdev) if (abx500_pdata) pdata = abx500_pdata->gpio; - if (!pdata) { - if (np) { - const struct of_device_id *match; - match = of_match_device(abx500_gpio_match, &pdev->dev); - if (!match) - return -ENODEV; - id = (unsigned long)match->data; - } else { - dev_err(&pdev->dev, "gpio dt and platform data missing\n"); - return -ENODEV; - } + if (!(pdata || np)) { + dev_err(&pdev->dev, "gpio dt and platform data missing\n"); + return -ENODEV; } - if (platid) - id = platid->driver_data; - pct = devm_kzalloc(&pdev->dev, sizeof(struct abx500_pinctrl), GFP_KERNEL); if (pct == NULL) { @@ -882,6 +871,16 @@ static int abx500_gpio_probe(struct platform_device *pdev) pct->chip.dev = &pdev->dev; pct->chip.base = (np) ? -1 : pdata->gpio_base; + if (platid) + id = platid->driver_data; + else if (np) { + const struct of_device_id *match; + + match = of_match_device(abx500_gpio_match, &pdev->dev); + if (match) + id = (unsigned long)match->data; + } + /* initialize the lock */ mutex_init(&pct->lock); -- cgit v1.2.3 From 99758dec9507fa1c5723c926626499e895679c40 Mon Sep 17 00:00:00 2001 From: Marc Dietrich Date: Mon, 29 Apr 2013 23:14:50 +0200 Subject: staging: nvec: add missing module aliases Keyboard and mouse drivers were missing MODULE_ALIAS definitions. This fixes auto module loading of these drivers. Signed-off-by: Marc Dietrich Signed-off-by: Greg Kroah-Hartman --- drivers/staging/nvec/nvec_kbd.c | 1 + drivers/staging/nvec/nvec_ps2.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/staging/nvec/nvec_kbd.c b/drivers/staging/nvec/nvec_kbd.c index 7445ce6422bb..fdbe0f3e86d8 100644 --- a/drivers/staging/nvec/nvec_kbd.c +++ b/drivers/staging/nvec/nvec_kbd.c @@ -188,4 +188,5 @@ module_platform_driver(nvec_kbd_driver); MODULE_AUTHOR("Marc Dietrich "); MODULE_DESCRIPTION("NVEC keyboard driver"); +MODULE_ALIAS("platform:nvec-kbd"); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/nvec/nvec_ps2.c b/drivers/staging/nvec/nvec_ps2.c index aff6b9b9f9aa..abb03f023ff6 100644 --- a/drivers/staging/nvec/nvec_ps2.c +++ b/drivers/staging/nvec/nvec_ps2.c @@ -179,4 +179,5 @@ module_platform_driver(nvec_mouse_driver); MODULE_DESCRIPTION("NVEC mouse driver"); MODULE_AUTHOR("Marc Dietrich "); +MODULE_ALIAS("platform:nvec-mouse"); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 111c158787b2a2036c444f735370cb6aef823f78 Mon Sep 17 00:00:00 2001 From: Marc Dietrich Date: Mon, 29 Apr 2013 23:14:51 +0200 Subject: staging: nvec: implement unregistering of notifiers This implements the unregistering of notifiers so kernel modules can be unloaded. Signed-off-by: Marc Dietrich Signed-off-by: Greg Kroah-Hartman --- drivers/staging/nvec/nvec.c | 14 ++++++++++++++ drivers/staging/nvec/nvec.h | 5 ++--- 2 files changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c index 954c9921d5b9..51a123e2b066 100644 --- a/drivers/staging/nvec/nvec.c +++ b/drivers/staging/nvec/nvec.c @@ -123,6 +123,20 @@ int nvec_register_notifier(struct nvec_chip *nvec, struct notifier_block *nb, } EXPORT_SYMBOL_GPL(nvec_register_notifier); +/** + * nvec_unregister_notifier - Unregister a notifier with nvec + * @nvec: A &struct nvec_chip + * @nb: The notifier block to unregister + * + * Unregisters a notifier with @nvec. The notifier will be removed from the + * atomic notifier chain. + */ +int nvec_unregister_notifier(struct nvec_chip *nvec, struct notifier_block *nb) +{ + return atomic_notifier_chain_unregister(&nvec->notifier_list, nb); +} +EXPORT_SYMBOL_GPL(nvec_unregister_notifier); + /** * nvec_status_notifier - The final notifier * diff --git a/drivers/staging/nvec/nvec.h b/drivers/staging/nvec/nvec.h index b7a14bc0ab91..2b1316d87470 100644 --- a/drivers/staging/nvec/nvec.h +++ b/drivers/staging/nvec/nvec.h @@ -197,9 +197,8 @@ extern int nvec_register_notifier(struct nvec_chip *nvec, struct notifier_block *nb, unsigned int events); -extern int nvec_unregister_notifier(struct device *dev, - struct notifier_block *nb, - unsigned int events); +extern int nvec_unregister_notifier(struct nvec_chip *dev, + struct notifier_block *nb); extern void nvec_msg_free(struct nvec_chip *nvec, struct nvec_msg *msg); -- cgit v1.2.3 From c2b62f60f67e0375c09d3c385ba90999d39d3dce Mon Sep 17 00:00:00 2001 From: Marc Dietrich Date: Mon, 29 Apr 2013 23:14:52 +0200 Subject: staging: nvec: cleanup childs on remove Disable device functions and unregister notifier if available. The serio device must not be "kzallocated". Otherwise serio_unregister_port will fail because the device is already freed. Signed-off-by: Marc Dietrich Signed-off-by: Greg Kroah-Hartman --- drivers/staging/nvec/nvec.c | 5 ++++- drivers/staging/nvec/nvec_kbd.c | 9 ++++++++- drivers/staging/nvec/nvec_power.c | 1 + drivers/staging/nvec/nvec_ps2.c | 7 ++++++- 4 files changed, 19 insertions(+), 3 deletions(-) diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c index 51a123e2b066..0e34679916b8 100644 --- a/drivers/staging/nvec/nvec.c +++ b/drivers/staging/nvec/nvec.c @@ -829,7 +829,7 @@ static int tegra_nvec_probe(struct platform_device *pdev) return -ENODEV; } - i2c_clk = clk_get(&pdev->dev, "div-clk"); + i2c_clk = devm_clk_get(&pdev->dev, "div-clk"); if (IS_ERR(i2c_clk)) { dev_err(nvec->dev, "failed to get controller clock\n"); return -ENODEV; @@ -916,8 +916,11 @@ static int tegra_nvec_remove(struct platform_device *pdev) nvec_toggle_global_events(nvec, false); mfd_remove_devices(nvec->dev); + nvec_unregister_notifier(nvec, &nvec->nvec_status_notifier); cancel_work_sync(&nvec->rx_work); cancel_work_sync(&nvec->tx_work); + /* FIXME: needs check wether nvec is responsible for power off */ + pm_power_off = NULL; return 0; } diff --git a/drivers/staging/nvec/nvec_kbd.c b/drivers/staging/nvec/nvec_kbd.c index fdbe0f3e86d8..a0ec52a4114f 100644 --- a/drivers/staging/nvec/nvec_kbd.c +++ b/drivers/staging/nvec/nvec_kbd.c @@ -169,8 +169,15 @@ fail: static int nvec_kbd_remove(struct platform_device *pdev) { + struct nvec_chip *nvec = dev_get_drvdata(pdev->dev.parent); + char disable_kbd[] = { NVEC_KBD, DISABLE_KBD }, + uncnfg_wake_key_reporting[] = { NVEC_KBD, CNFG_WAKE_KEY_REPORTING, + false }; + nvec_write_async(nvec, uncnfg_wake_key_reporting, 3); + nvec_write_async(nvec, disable_kbd, 2); + nvec_unregister_notifier(nvec, &keys_dev.notifier); + input_unregister_device(keys_dev.input); - input_free_device(keys_dev.input); return 0; } diff --git a/drivers/staging/nvec/nvec_power.c b/drivers/staging/nvec/nvec_power.c index 296f7b9a8c8c..aacfcd6954a3 100644 --- a/drivers/staging/nvec/nvec_power.c +++ b/drivers/staging/nvec/nvec_power.c @@ -414,6 +414,7 @@ static int nvec_power_remove(struct platform_device *pdev) struct nvec_power *power = platform_get_drvdata(pdev); cancel_delayed_work_sync(&power->poller); + nvec_unregister_notifier(power->nvec, &power->notifier); switch (pdev->id) { case AC: power_supply_unregister(&nvec_psy); diff --git a/drivers/staging/nvec/nvec_ps2.c b/drivers/staging/nvec/nvec_ps2.c index abb03f023ff6..06dbb02085a9 100644 --- a/drivers/staging/nvec/nvec_ps2.c +++ b/drivers/staging/nvec/nvec_ps2.c @@ -106,7 +106,7 @@ static int nvec_mouse_probe(struct platform_device *pdev) struct serio *ser_dev; char mouse_reset[] = { NVEC_PS2, SEND_COMMAND, PSMOUSE_RST, 3 }; - ser_dev = devm_kzalloc(&pdev->dev, sizeof(struct serio), GFP_KERNEL); + ser_dev = kzalloc(sizeof(struct serio), GFP_KERNEL); if (ser_dev == NULL) return -ENOMEM; @@ -133,6 +133,11 @@ static int nvec_mouse_probe(struct platform_device *pdev) static int nvec_mouse_remove(struct platform_device *pdev) { + struct nvec_chip *nvec = dev_get_drvdata(pdev->dev.parent); + + ps2_sendcommand(ps2_dev.ser_dev, DISABLE_MOUSE); + ps2_stopstreaming(ps2_dev.ser_dev); + nvec_unregister_notifier(nvec, &ps2_dev.notifier); serio_unregister_port(ps2_dev.ser_dev); return 0; -- cgit v1.2.3 From 1c7ad8f0019403bd32f457f14477e1855d93f434 Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Sat, 11 May 2013 05:45:56 +1200 Subject: pinctrl: vt8500: Fix incorrect data in WM8750 pinctrl table WMT_PIN_WAKEUP1 should be declared as WMT_PIN(0, 17) rather than WMT_PIN(0, 16). This currently generates a runtime warning because WMT_PIN_WAKEUP0 is already defined as WMT_PIN(0, 16). Signed-off-by: Tony Prisk Signed-off-by: Linus Walleij --- drivers/pinctrl/vt8500/pinctrl-wm8750.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8750.c b/drivers/pinctrl/vt8500/pinctrl-wm8750.c index b964cc550568..de43262398db 100644 --- a/drivers/pinctrl/vt8500/pinctrl-wm8750.c +++ b/drivers/pinctrl/vt8500/pinctrl-wm8750.c @@ -53,7 +53,7 @@ static const struct wmt_pinctrl_bank_registers wm8750_banks[] = { #define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6) #define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7) #define WMT_PIN_WAKEUP0 WMT_PIN(0, 16) -#define WMT_PIN_WAKEUP1 WMT_PIN(0, 16) +#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17) #define WMT_PIN_SD0CD WMT_PIN(0, 28) #define WMT_PIN_VDOUT0 WMT_PIN(1, 0) #define WMT_PIN_VDOUT1 WMT_PIN(1, 1) -- cgit v1.2.3 From 63ad9cbff5896dadfee510f631ffcb0176984722 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 23 Apr 2013 15:28:38 +0200 Subject: pinctrl: generic: Fix typos and clarify comments Drive strength controls both sink and source currents, clarify the description accordingly. Signed-off-by: Laurent Pinchart Signed-off-by: Linus Walleij --- include/linux/pinctrl/pinconf-generic.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 72474e18f1e0..6aa238096622 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -37,17 +37,17 @@ * if it is 0, pull-down is disabled. * @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and * low, this is the most typical case and is typically achieved with two - * active transistors on the output. Sending this config will enabale + * active transistors on the output. Setting this config will enable * push-pull mode, the argument is ignored. * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open * collector) which means it is usually wired with other output ports - * which are then pulled up with an external resistor. Sending this - * config will enabale open drain mode, the argument is ignored. + * which are then pulled up with an external resistor. Setting this + * config will enable open drain mode, the argument is ignored. * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source - * (open emitter). Sending this config will enabale open drain mode, the + * (open emitter). Setting this config will enable open drain mode, the * argument is ignored. - * @PIN_CONFIG_DRIVE_STRENGTH: the pin will output the current passed as - * argument. The argument is in mA. + * @PIN_CONFIG_DRIVE_STRENGTH: the pin will sink or source at most the current + * passed as argument. The argument is in mA. * @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin. * If the argument != 0, schmitt-trigger mode is enabled. If it's 0, * schmitt-trigger mode is disabled. -- cgit v1.2.3 From 18442e65d424dc84a4a4a3b635eb1a52de3cb6b4 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 20:06:19 +0800 Subject: pinctrl: single: fix error return code in pcs_parse_one_pinctrl_entry() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Introduced by commit 9dddb4df90d136429b6d6ddefceb49a9b93f6cd1 (pinctrl: single: support generic pinconf) Signed-off-by: Wei Yongjun Acked-by: Haojian Zhuang Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-single.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index 5f2d2bfd356e..b9fa04618601 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -1166,7 +1166,8 @@ static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs, (*map)->data.mux.function = np->name; if (pcs->is_pinconf) { - if (pcs_parse_pinconf(pcs, np, function, map)) + res = pcs_parse_pinconf(pcs, np, function, map); + if (res) goto free_pingroups; *num_maps = 2; } else { -- cgit v1.2.3 From 9349d00fc3ff2b110dc07d9f5d06abfeac300c19 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 7 May 2013 22:06:57 +0200 Subject: ARM: at91/trivial: fix model name for SAM9X25-EK Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre Cc: stable # 3.8+ --- arch/arm/boot/dts/at91sam9x25ek.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts index 3b40d11d65e7..315250b4995e 100644 --- a/arch/arm/boot/dts/at91sam9x25ek.dts +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -11,7 +11,7 @@ /include/ "at91sam9x5ek.dtsi" / { - model = "Atmel AT91SAM9G25-EK"; + model = "Atmel AT91SAM9X25-EK"; compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; ahb { -- cgit v1.2.3 From 5ade7e4214b43e9b934202d892e3d7c131617908 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 14 May 2013 15:14:49 +0200 Subject: ARM: at91/trivial: typo in GEM compatible string Signed-off-by: Nicolas Ferre --- Documentation/devicetree/bindings/net/macb.txt | 2 +- arch/arm/boot/dts/sama5d3.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index 44afa0e5057d..4ff65047bb9a 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -4,7 +4,7 @@ Required properties: - compatible: Should be "cdns,[-]{macb|gem}" Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs. Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". - Use "cnds,pc302-gem" for Picochip picoXcell pc302 and later devices based on + Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on the Cadence GEM, or the generic form: "cdns,gem". - reg: Address and length of the register set for the device - interrupts: Should contain macb interrupt diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 2e643ea51cce..5fce96b1cee4 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -156,7 +156,7 @@ }; macb0: ethernet@f0028000 { - compatible = "cnds,pc302-gem", "cdns,gem"; + compatible = "cdns,pc302-gem", "cdns,gem"; reg = <0xf0028000 0x100>; interrupts = <34 4 3>; pinctrl-names = "default"; -- cgit v1.2.3 From 3f81127293284da449942a0144b9747c5db1e523 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Wed, 24 Apr 2013 15:56:48 +0200 Subject: ARM: at91: dts: request only spi cs-gpios used on sama5d3x cpu module Instead of requesting all available spi cs-gpios, request only the ones used on the board, in our case on the cpu module. Signed-off-by: Ludovic Desroches Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/sama5d3.dtsi | 10 ---------- arch/arm/boot/dts/sama5d3xcm.dtsi | 4 ++++ 2 files changed, 4 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 5fce96b1cee4..5000e0d42849 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -75,11 +75,6 @@ compatible = "atmel,at91sam9x5-spi"; reg = <0xf0004000 0x100>; interrupts = <24 4 3>; - cs-gpios = <&pioD 13 0 - &pioD 14 0 /* conflicts with SCK0 and CANRX0 */ - &pioD 15 0 /* conflicts with CTS0 and CANTX0 */ - &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */ - >; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -203,11 +198,6 @@ compatible = "atmel,at91sam9x5-spi"; reg = <0xf8008000 0x100>; interrupts = <25 4 3>; - cs-gpios = <&pioC 25 0 - &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */ - &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */ - &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */ - >; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 1f8ed404626c..b336e7787cb3 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -32,6 +32,10 @@ ahb { apb { + spi0: spi@f0004000 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; + }; + macb0: ethernet@f0028000 { phy-mode = "rgmii"; }; -- cgit v1.2.3 From c560ecfe9617c629ad09b07edb7523c87b2c9619 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 14 May 2013 10:51:18 +0100 Subject: arm64: Invoke the of_platform_populate() at arch_initcall() level The of_platform_populate() is currently invoked at device_initcall() level. There are however drivers that use platform_driver_probe() directly and they need the devices to be populated. This patch makes the of_platform_populate() and arch_initcall(). Signed-off-by: Catalin Marinas Reported-by: Benoit Lecardonnel Tested-by: Benoit Lecardonnel --- arch/arm64/kernel/setup.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 6a9a53292590..add6ea616843 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -282,12 +282,13 @@ void __init setup_arch(char **cmdline_p) #endif } -static int __init arm64_of_clk_init(void) +static int __init arm64_device_init(void) { of_clk_init(NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); return 0; } -arch_initcall(arm64_of_clk_init); +arch_initcall(arm64_device_init); static DEFINE_PER_CPU(struct cpu, cpu_data); @@ -305,13 +306,6 @@ static int __init topology_init(void) } subsys_initcall(topology_init); -static int __init arm64_device_probe(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - return 0; -} -device_initcall(arm64_device_probe); - static const char *hwcap_str[] = { "fp", "asimd", -- cgit v1.2.3 From b4fed0796841b5293b9c9427a5391b7bb20ef2d9 Mon Sep 17 00:00:00 2001 From: Sukanto Ghosh Date: Tue, 14 May 2013 10:26:54 +0100 Subject: arm64: mm: Fix operands of clz in __flush_dcache_all The format of the lower 32-bits of the 64-bit operand to 'dc cisw' is unchanged from ARMv7 architecture and the upper bits are RES0. This implies that the 'way' field of the operand of 'dc cisw' occupies the bit-positions [31 .. (32-A)]. Due to the use of 64-bit extended operands to 'clz', the existing implementation of __flush_dcache_all is incorrectly placing the 'way' field in the bit-positions [63 .. (64-A)]. Signed-off-by: Sukanto Ghosh Tested-by: Anup Patel Signed-off-by: Catalin Marinas Cc: stable@vger.kernel.org --- arch/arm64/mm/cache.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S index abe69b80cf7f..48a386094fa3 100644 --- a/arch/arm64/mm/cache.S +++ b/arch/arm64/mm/cache.S @@ -52,7 +52,7 @@ loop1: add x2, x2, #4 // add 4 (line length offset) mov x4, #0x3ff and x4, x4, x1, lsr #3 // find maximum number on the way size - clz x5, x4 // find bit position of way size increment + clz w5, w4 // find bit position of way size increment mov x7, #0x7fff and x7, x7, x1, lsr #13 // extract max number of the index size loop2: -- cgit v1.2.3 From 02e3cba685efe61f0c3b10f1622c6a229ac93a61 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 14 May 2013 12:22:06 +0100 Subject: arm64: Do not source kernel/time/Kconfig explicitly As per commit 764e0da1 (timers: Fixup the Kconfig consolidation fallout), init/Kconfig already includes kernel/time/Kconfig, so no need to do it explicitly for arm64. Signed-off-by: Catalin Marinas --- arch/arm64/Kconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 48347dcf0566..56b3f6d447ae 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -122,8 +122,6 @@ endmenu menu "Kernel Features" -source "kernel/time/Kconfig" - config ARM64_64K_PAGES bool "Enable 64KB pages support" help -- cgit v1.2.3 From f7ea0fd639c2c48d3c61b6eec75362be290c6874 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 13 May 2013 21:40:27 +0200 Subject: tick: Don't invoke tick_nohz_stop_sched_tick() if the cpu is offline commit 5b39939a4 (nohz: Move ts->idle_calls incrementation into strict idle logic) moved code out of tick_nohz_stop_sched_tick() and missed to bail out when the cpu is offline. That's causing subsequent failures as an offline CPU is supposed to die and not to fiddle with nohz magic. Return false in can_stop_idle_tick() if the cpu is offline. Reported-and-tested-by: Jiri Kosina Reported-and-tested-by: Prarit Bhargava Cc: Frederic Weisbecker Cc: Borislav Petkov Cc: Tony Luck Cc: x86@kernel.org Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305132138160.2863@ionos Signed-off-by: Thomas Gleixner --- kernel/time/tick-sched.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 0eed1db2d792..012142187db9 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -469,6 +469,7 @@ static bool can_stop_idle_tick(int cpu, struct tick_sched *ts) if (unlikely(!cpu_online(cpu))) { if (cpu == tick_do_timer_cpu) tick_do_timer_cpu = TICK_DO_TIMER_NONE; + return false; } if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE)) -- cgit v1.2.3 From b47430d3adbedbfdb5979ba4874f5dadf94f16b1 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Tue, 14 May 2013 04:01:27 +0530 Subject: rcu/idle: Wrap cpu-idle poll mode within rcu_idle_enter/exit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bjørn Mork reported the following warning when running powertop. [ 49.289034] ------------[ cut here ]------------ [ 49.289055] WARNING: at kernel/rcutree.c:502 rcu_eqs_exit_common.isra.48+0x3d/0x125() [ 49.289244] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-bisect-rcu-warn+ #107 [ 49.289251] ffffffff8157d8c8 ffffffff81801e28 ffffffff8137e4e3 ffffffff81801e68 [ 49.289260] ffffffff8103094f ffffffff81801e68 0000000000000000 ffff88023afcd9b0 [ 49.289268] 0000000000000000 0140000000000000 ffff88023bee7700 ffffffff81801e78 [ 49.289276] Call Trace: [ 49.289285] [] dump_stack+0x19/0x1b [ 49.289293] [] warn_slowpath_common+0x62/0x7b [ 49.289300] [] warn_slowpath_null+0x15/0x17 [ 49.289306] [] rcu_eqs_exit_common.isra.48+0x3d/0x125 [ 49.289314] [] ? trace_hardirqs_off_caller+0x37/0xa6 [ 49.289320] [] rcu_idle_exit+0x85/0xa8 [ 49.289327] [] trace_cpu_idle_rcuidle+0xae/0xff [ 49.289334] [] cpu_startup_entry+0x72/0x115 [ 49.289341] [] rest_init+0x149/0x150 [ 49.289347] [] ? csum_partial_copy_generic+0x16c/0x16c [ 49.289355] [] start_kernel+0x3f0/0x3fd [ 49.289362] [] ? repair_env_string+0x5a/0x5a [ 49.289368] [] x86_64_start_reservations+0x2a/0x2c [ 49.289375] [] x86_64_start_kernel+0xcd/0xd1 [ 49.289379] ---[ end trace 07a1cc95e29e9036 ]--- The warning is that 'rdtp->dynticks' has an unexpected value, which roughly translates to - the calls to rcu_idle_enter() and rcu_idle_exit() were not made in the correct order, or otherwise messed up. And Bjørn's painstaking debugging indicated that this happens when the idle loop enters the poll mode. Looking at the poll function cpu_idle_poll(), and the implementation of trace_cpu_idle_rcuidle(), the problem becomes very clear: cpu_idle_poll() lacks calls to rcu_idle_enter/exit(), and trace_cpu_idle_rcuidle() calls them in the reverse order - first rcu_idle_exit(), and then rcu_idle_enter(). Hence the even/odd alternative sequencing of rdtp->dynticks goes for a toss. And powertop readily triggers this because powertop uses the idle-tracing infrastructure extensively. So, to fix this, wrap the code in cpu_idle_poll() within rcu_idle_enter/exit(), so that it blends properly with the calls inside trace_cpu_idle_rcuidle() and thus get the function ordering right. Reported-and-tested-by: Bjørn Mork Cc: Paul McKenney Cc: Steven Rostedt Cc: Dipankar Sarma Signed-off-by: Srivatsa S. Bhat Link: http://lkml.kernel.org/r/519169BF.4080208@linux.vnet.ibm.com Signed-off-by: Thomas Gleixner --- kernel/cpu/idle.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/cpu/idle.c b/kernel/cpu/idle.c index 8b86c0c68edf..d5585f5e038e 100644 --- a/kernel/cpu/idle.c +++ b/kernel/cpu/idle.c @@ -40,11 +40,13 @@ __setup("hlt", cpu_idle_nopoll_setup); static inline int cpu_idle_poll(void) { + rcu_idle_enter(); trace_cpu_idle_rcuidle(0, smp_processor_id()); local_irq_enable(); while (!need_resched()) cpu_relax(); trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id()); + rcu_idle_exit(); return 1; } -- cgit v1.2.3 From 42a5cf46cd56f46267d2a9fcf2655f4078cd3042 Mon Sep 17 00:00:00 2001 From: Tirupathi Reddy Date: Tue, 14 May 2013 13:59:02 +0530 Subject: timer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE An inactive timer's base can refer to a offline cpu's base. In the current code, cpu_base's lock is blindly reinitialized each time a CPU is brought up. If a CPU is brought online during the period that another thread is trying to modify an inactive timer on that CPU with holding its timer base lock, then the lock will be reinitialized under its feet. This leads to following SPIN_BUG(). <0> BUG: spinlock already unlocked on CPU#3, kworker/u:3/1466 <0> lock: 0xe3ebe000, .magic: dead4ead, .owner: kworker/u:3/1466, .owner_cpu: 1 <4> [] (unwind_backtrace+0x0/0x11c) from [] (do_raw_spin_unlock+0x40/0xcc) <4> [] (do_raw_spin_unlock+0x40/0xcc) from [] (_raw_spin_unlock+0x8/0x30) <4> [] (_raw_spin_unlock+0x8/0x30) from [] (mod_timer+0x294/0x310) <4> [] (mod_timer+0x294/0x310) from [] (queue_delayed_work_on+0x104/0x120) <4> [] (queue_delayed_work_on+0x104/0x120) from [] (sdhci_msm_bus_voting+0x88/0x9c) <4> [] (sdhci_msm_bus_voting+0x88/0x9c) from [] (sdhci_disable+0x40/0x48) <4> [] (sdhci_disable+0x40/0x48) from [] (mmc_release_host+0x4c/0xb0) <4> [] (mmc_release_host+0x4c/0xb0) from [] (mmc_sd_detect+0x90/0xfc) <4> [] (mmc_sd_detect+0x90/0xfc) from [] (mmc_rescan+0x7c/0x2c4) <4> [] (mmc_rescan+0x7c/0x2c4) from [] (process_one_work+0x27c/0x484) <4> [] (process_one_work+0x27c/0x484) from [] (worker_thread+0x210/0x3b0) <4> [] (worker_thread+0x210/0x3b0) from [] (kthread+0x80/0x8c) <4> [] (kthread+0x80/0x8c) from [] (kernel_thread_exit+0x0/0x8) As an example, this particular crash occurred when CPU #3 is executing mod_timer() on an inactive timer whose base is refered to offlined CPU #2. The code locked the timer_base corresponding to CPU #2. Before it could proceed, CPU #2 came online and reinitialized the spinlock corresponding to its base. Thus now CPU #3 held a lock which was reinitialized. When CPU #3 finally ended up unlocking the old cpu_base corresponding to CPU #2, we hit the above SPIN_BUG(). CPU #0 CPU #3 CPU #2 ------ ------- ------- ..... ...... mod_timer() lock_timer_base spin_lock_irqsave(&base->lock) cpu_up(2) ..... ...... init_timers_cpu() .... ..... spin_lock_init(&base->lock) ..... spin_unlock_irqrestore(&base->lock) ...... Allocation of per_cpu timer vector bases is done only once under "tvec_base_done[]" check. In the current code, spinlock_initialization of base->lock isn't under this check. When a CPU is up each time the base lock is reinitialized. Move base spinlock initialization under the check. Signed-off-by: Tirupathi Reddy Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1368520142-4136-1-git-send-email-tirupath@codeaurora.org Signed-off-by: Thomas Gleixner --- kernel/timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/timer.c b/kernel/timer.c index 09bca8ce9771..7376589adc28 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1539,12 +1539,12 @@ static int __cpuinit init_timers_cpu(int cpu) boot_done = 1; base = &boot_tvec_bases; } + spin_lock_init(&base->lock); tvec_base_done[cpu] = 1; } else { base = per_cpu(tvec_bases, cpu); } - spin_lock_init(&base->lock); for (j = 0; j < TVN_SIZE; j++) { INIT_LIST_HEAD(base->tv5.vec + j); -- cgit v1.2.3 From 6faf72834d9d0c0dc6632604eaeffb621e87fcf9 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 13 May 2013 06:53:37 -0700 Subject: rcu: Fix comparison sense in rcu_needs_cpu() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit c0f4dfd4f (rcu: Make RCU_FAST_NO_HZ take advantage of numbered callbacks) introduced a bug that can result in excessively long grace periods. This bug reverse the senes of the "if" statement checking for lazy callbacks, so that RCU takes a lazy approach when there are in fact non-lazy callbacks. This can result in excessive boot, suspend, and resume times. This commit therefore fixes the sense of this "if" statement. Reported-by: Borislav Petkov Reported-by: Bjørn Mork Reported-by: Joerg Roedel Signed-off-by: Paul E. McKenney Tested-by: Bjørn Mork Tested-by: Joerg Roedel --- kernel/rcutree_plugin.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index 170814dc418f..6d939a645da1 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -1667,7 +1667,7 @@ int rcu_needs_cpu(int cpu, unsigned long *dj) rdtp->last_accelerate = jiffies; /* Request timer delay depending on laziness, and round. */ - if (rdtp->all_lazy) { + if (!rdtp->all_lazy) { *dj = round_up(rcu_idle_gp_delay + jiffies, rcu_idle_gp_delay) - jiffies; } else { -- cgit v1.2.3 From 44f3b503c16425c8e9db4bbaa2fc9cd0c9d0ba91 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Mon, 13 May 2013 11:04:15 +0000 Subject: tg3: Skip powering down function 0 on certain serdes devices On the 5718, 5719 and 5720 serdes devices, powering down function 0 results in all the other ports being powered down. Add code to skip function 0 power down. v2: - Modify tg3_phy_power_bug() function to use a switch instead of a complicated if statement. Suggested by Joe Perches. Cc: Signed-off-by: Michael Chan Signed-off-by: Nithin Nayak Sujir Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 32 ++++++++++++++++++++++++++------ 1 file changed, 26 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 728d42ab2a76..781be7660125 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -2957,6 +2957,31 @@ static int tg3_5700_link_polarity(struct tg3 *tp, u32 speed) return 0; } +static bool tg3_phy_power_bug(struct tg3 *tp) +{ + switch (tg3_asic_rev(tp)) { + case ASIC_REV_5700: + case ASIC_REV_5704: + return true; + case ASIC_REV_5780: + if (tp->phy_flags & TG3_PHYFLG_MII_SERDES) + return true; + return false; + case ASIC_REV_5717: + if (!tp->pci_fn) + return true; + return false; + case ASIC_REV_5719: + case ASIC_REV_5720: + if ((tp->phy_flags & TG3_PHYFLG_PHY_SERDES) && + !tp->pci_fn) + return true; + return false; + } + + return false; +} + static void tg3_power_down_phy(struct tg3 *tp, bool do_low_power) { u32 val; @@ -3016,12 +3041,7 @@ static void tg3_power_down_phy(struct tg3 *tp, bool do_low_power) /* The PHY should not be powered down on some chips because * of bugs. */ - if (tg3_asic_rev(tp) == ASIC_REV_5700 || - tg3_asic_rev(tp) == ASIC_REV_5704 || - (tg3_asic_rev(tp) == ASIC_REV_5780 && - (tp->phy_flags & TG3_PHYFLG_MII_SERDES)) || - (tg3_asic_rev(tp) == ASIC_REV_5717 && - !tp->pci_fn)) + if (tg3_phy_power_bug(tp)) return; if (tg3_chip_rev(tp) == CHIPREV_5784_AX || -- cgit v1.2.3 From 0f0d15100a8ac875bdd408324c473e16d73d3557 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 13 May 2013 11:04:16 +0000 Subject: tg3: Fix data corruption on 5725 with TSO The 5725 family of devices (asic rev 5762), corrupts TSO packets where the buffer is within MSS bytes of a 4G boundary (4G, 8G etc.). Detect this condition and trigger the workaround path. Cc: Signed-off-by: Michael Chan Signed-off-by: Nithin Nayak Sujir Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 781be7660125..e285d7645651 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -7448,6 +7448,20 @@ static inline int tg3_4g_overflow_test(dma_addr_t mapping, int len) return (base > 0xffffdcc0) && (base + len + 8 < base); } +/* Test for TSO DMA buffers that cross into regions which are within MSS bytes + * of any 4GB boundaries: 4G, 8G, etc + */ +static inline int tg3_4g_tso_overflow_test(struct tg3 *tp, dma_addr_t mapping, + u32 len, u32 mss) +{ + if (tg3_asic_rev(tp) == ASIC_REV_5762 && mss) { + u32 base = (u32) mapping & 0xffffffff; + + return ((base + len + (mss & 0x3fff)) < base); + } + return 0; +} + /* Test for DMA addresses > 40-bit */ static inline int tg3_40bit_overflow_test(struct tg3 *tp, dma_addr_t mapping, int len) @@ -7484,6 +7498,9 @@ static bool tg3_tx_frag_set(struct tg3_napi *tnapi, u32 *entry, u32 *budget, if (tg3_4g_overflow_test(map, len)) hwbug = true; + if (tg3_4g_tso_overflow_test(tp, map, len, mss)) + hwbug = true; + if (tg3_40bit_overflow_test(tp, map, len)) hwbug = true; -- cgit v1.2.3 From c14ff2ea2d5818c811e5c6e67e794df4a71a6094 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 13 May 2013 11:58:31 +0000 Subject: sfc: Delete EFX_PAGE_IP_ALIGN, equivalent to NET_IP_ALIGN The two architectures that define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS (powerpc and x86) now both define NET_IP_ALIGN as 0, so there is no need for this optimisation any more. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/efx.c | 4 ++-- drivers/net/ethernet/sfc/net_driver.h | 15 +-------------- drivers/net/ethernet/sfc/rx.c | 6 +++--- 3 files changed, 6 insertions(+), 19 deletions(-) diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index 01b99206139a..999289bb2eb9 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -638,13 +638,13 @@ static void efx_start_datapath(struct efx_nic *efx) EFX_MAX_FRAME_LEN(efx->net_dev->mtu) + efx->type->rx_buffer_padding); rx_buf_len = (sizeof(struct efx_rx_page_state) + - EFX_PAGE_IP_ALIGN + efx->rx_dma_len); + NET_IP_ALIGN + efx->rx_dma_len); if (rx_buf_len <= PAGE_SIZE) { efx->rx_scatter = false; efx->rx_buffer_order = 0; } else if (efx->type->can_rx_scatter) { BUILD_BUG_ON(sizeof(struct efx_rx_page_state) + - EFX_PAGE_IP_ALIGN + EFX_RX_USR_BUF_SIZE > + NET_IP_ALIGN + EFX_RX_USR_BUF_SIZE > PAGE_SIZE / 2); efx->rx_scatter = true; efx->rx_dma_len = EFX_RX_USR_BUF_SIZE; diff --git a/drivers/net/ethernet/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h index 9bd433a095c5..5efddf3c66e9 100644 --- a/drivers/net/ethernet/sfc/net_driver.h +++ b/drivers/net/ethernet/sfc/net_driver.h @@ -467,25 +467,12 @@ enum nic_state { STATE_RECOVERY = 3, /* device recovering from PCI error */ }; -/* - * Alignment of page-allocated RX buffers - * - * Controls the number of bytes inserted at the start of an RX buffer. - * This is the equivalent of NET_IP_ALIGN [which controls the alignment - * of the skb->head for hardware DMA]. - */ -#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS -#define EFX_PAGE_IP_ALIGN 0 -#else -#define EFX_PAGE_IP_ALIGN NET_IP_ALIGN -#endif - /* * Alignment of the skb->head which wraps a page-allocated RX buffer * * The skb allocated to wrap an rx_buffer can have this alignment. Since * the data is memcpy'd from the rx_buf, it does not need to be equal to - * EFX_PAGE_IP_ALIGN. + * NET_IP_ALIGN. */ #define EFX_PAGE_SKB_ALIGN 2 diff --git a/drivers/net/ethernet/sfc/rx.c b/drivers/net/ethernet/sfc/rx.c index e73e30bac10e..99f70dd55fc8 100644 --- a/drivers/net/ethernet/sfc/rx.c +++ b/drivers/net/ethernet/sfc/rx.c @@ -93,7 +93,7 @@ static inline void efx_sync_rx_buffer(struct efx_nic *efx, void efx_rx_config_page_split(struct efx_nic *efx) { - efx->rx_page_buf_step = ALIGN(efx->rx_dma_len + EFX_PAGE_IP_ALIGN, + efx->rx_page_buf_step = ALIGN(efx->rx_dma_len + NET_IP_ALIGN, L1_CACHE_BYTES); efx->rx_bufs_per_page = efx->rx_buffer_order ? 1 : ((PAGE_SIZE - sizeof(struct efx_rx_page_state)) / @@ -188,9 +188,9 @@ static int efx_init_rx_buffers(struct efx_rx_queue *rx_queue) do { index = rx_queue->added_count & rx_queue->ptr_mask; rx_buf = efx_rx_buffer(rx_queue, index); - rx_buf->dma_addr = dma_addr + EFX_PAGE_IP_ALIGN; + rx_buf->dma_addr = dma_addr + NET_IP_ALIGN; rx_buf->page = page; - rx_buf->page_offset = page_offset + EFX_PAGE_IP_ALIGN; + rx_buf->page_offset = page_offset + NET_IP_ALIGN; rx_buf->len = efx->rx_dma_len; rx_buf->flags = 0; ++rx_queue->added_count; -- cgit v1.2.3 From 950c54df1e503ece4e2987b0cf6e2e4e22817c0c Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 13 May 2013 12:01:22 +0000 Subject: sfc: Reduce RX scatter buffer size, and reduce alignment if appropriate efx_start_datapath() asserts that we can fit 2 RX scatter buffers plus a software structure, each appropriately aligned, into a single page. Where L1_CACHE_BYTES == 256 and PAGE_SIZE == 4096, which is the case on s390, this assertion fails. The current scatter buffer size is also not a multiple of 64 or 128, which are more common cache line sizes. If we can make both the start and end of a scatter buffer cache-aligned, this will reduce the need for read-modify-write operations on inter- processor links. Fix the alignment by reducing EFX_RX_USR_BUF_SIZE to 2048 - 256 == 1792. (We could use 2048 - L1_CACHE_BYTES, but EFX_RX_USR_BUF_SIZE also affects user-level networking where a larger amount of housekeeping data may be needed. Although this version of the driver does not support user-level networking, I prefer to keep scattering behaviour consistent with the out-of-tree version.) This still doesn't fix the s390 build because like most architectures it has NET_IP_ALIGN == 2. When NET_IP_ALIGN != 0 we cannot achieve cache line alignment at either the start or end of a scatter buffer, so there is actually no point in padding the buffers to a multiple of the cache line size. All we need is 4-byte alignment of the network header, so do that. Adjust the assertions accordingly. Reported-by: Geert Uytterhoeven Reported-by: Heiko Carstens Signed-off-by: Ben Hutchings Acked-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/efx.c | 6 ++++-- drivers/net/ethernet/sfc/net_driver.h | 16 ++++++++++++++-- drivers/net/ethernet/sfc/rx.c | 2 +- 3 files changed, 19 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index 999289bb2eb9..39e4cb39de29 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -643,9 +643,11 @@ static void efx_start_datapath(struct efx_nic *efx) efx->rx_scatter = false; efx->rx_buffer_order = 0; } else if (efx->type->can_rx_scatter) { + BUILD_BUG_ON(EFX_RX_USR_BUF_SIZE % L1_CACHE_BYTES); BUILD_BUG_ON(sizeof(struct efx_rx_page_state) + - NET_IP_ALIGN + EFX_RX_USR_BUF_SIZE > - PAGE_SIZE / 2); + 2 * ALIGN(NET_IP_ALIGN + EFX_RX_USR_BUF_SIZE, + EFX_RX_BUF_ALIGNMENT) > + PAGE_SIZE); efx->rx_scatter = true; efx->rx_dma_len = EFX_RX_USR_BUF_SIZE; efx->rx_buffer_order = 0; diff --git a/drivers/net/ethernet/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h index 5efddf3c66e9..39d6bd77f015 100644 --- a/drivers/net/ethernet/sfc/net_driver.h +++ b/drivers/net/ethernet/sfc/net_driver.h @@ -72,8 +72,20 @@ /* Maximum possible MTU the driver supports */ #define EFX_MAX_MTU (9 * 1024) -/* Size of an RX scatter buffer. Small enough to pack 2 into a 4K page. */ -#define EFX_RX_USR_BUF_SIZE 1824 +/* Size of an RX scatter buffer. Small enough to pack 2 into a 4K page, + * and should be a multiple of the cache line size. + */ +#define EFX_RX_USR_BUF_SIZE (2048 - 256) + +/* If possible, we should ensure cache line alignment at start and end + * of every buffer. Otherwise, we just need to ensure 4-byte + * alignment of the network header. + */ +#if NET_IP_ALIGN == 0 +#define EFX_RX_BUF_ALIGNMENT L1_CACHE_BYTES +#else +#define EFX_RX_BUF_ALIGNMENT 4 +#endif /* Forward declare Precision Time Protocol (PTP) support structure. */ struct efx_ptp_data; diff --git a/drivers/net/ethernet/sfc/rx.c b/drivers/net/ethernet/sfc/rx.c index 99f70dd55fc8..a7dfe36cabf4 100644 --- a/drivers/net/ethernet/sfc/rx.c +++ b/drivers/net/ethernet/sfc/rx.c @@ -94,7 +94,7 @@ static inline void efx_sync_rx_buffer(struct efx_nic *efx, void efx_rx_config_page_split(struct efx_nic *efx) { efx->rx_page_buf_step = ALIGN(efx->rx_dma_len + NET_IP_ALIGN, - L1_CACHE_BYTES); + EFX_RX_BUF_ALIGNMENT); efx->rx_bufs_per_page = efx->rx_buffer_order ? 1 : ((PAGE_SIZE - sizeof(struct efx_rx_page_state)) / efx->rx_page_buf_step); -- cgit v1.2.3 From efee8e8712921279c3a5a687d5b65ee7fde7db89 Mon Sep 17 00:00:00 2001 From: Sarveshwar Bandi Date: Mon, 13 May 2013 20:28:20 +0000 Subject: be2net: Avoid double insertion of vlan tags. Fix to avoid double insertion of vlan tags into the packet while handling an asic workaroud (issue introduced by net next Commit bc0c340) Signed-off-by: Sarveshwar Bandi Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index a444110b060f..ca2967b0f18b 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -780,26 +780,18 @@ static struct sk_buff *be_insert_vlan_in_pkt(struct be_adapter *adapter, if (unlikely(!skb)) return skb; - if (vlan_tx_tag_present(skb)) { + if (vlan_tx_tag_present(skb)) vlan_tag = be_get_tx_vlan_tag(adapter, skb); - skb = __vlan_put_tag(skb, htons(ETH_P_8021Q), vlan_tag); - if (skb) - skb->vlan_tci = 0; - } - - if (qnq_async_evt_rcvd(adapter) && adapter->pvid) { - if (!vlan_tag) - vlan_tag = adapter->pvid; - if (skip_hw_vlan) - *skip_hw_vlan = true; - } + else if (qnq_async_evt_rcvd(adapter) && adapter->pvid) + vlan_tag = adapter->pvid; if (vlan_tag) { skb = __vlan_put_tag(skb, htons(ETH_P_8021Q), vlan_tag); if (unlikely(!skb)) return skb; - skb->vlan_tci = 0; + if (skip_hw_vlan) + *skip_hw_vlan = true; } /* Insert the outer VLAN, if any */ -- cgit v1.2.3 From 54d27fcb338bd9c42d1dfc5a39e18f6f9d373c2e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 13 May 2013 21:25:52 +0000 Subject: tcp: fix tcp_md5_hash_skb_data() TCP md5 communications fail [1] for some devices, because sg/crypto code assume page offsets are below PAGE_SIZE. This was discovered using mlx4 driver [2], but I suspect loopback might trigger the same bug now we use order-3 pages in tcp_sendmsg() [1] Failure is giving following messages. huh, entered softirq 3 NET_RX ffffffff806ad230 preempt_count 00000100, exited with 00000101? [2] mlx4 driver uses order-2 pages to allocate RX frags Reported-by: Matt Schnall Signed-off-by: Eric Dumazet Cc: Bernhard Beck Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index dcb116dde216..10c93930abda 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -3269,8 +3269,11 @@ int tcp_md5_hash_skb_data(struct tcp_md5sig_pool *hp, for (i = 0; i < shi->nr_frags; ++i) { const struct skb_frag_struct *f = &shi->frags[i]; - struct page *page = skb_frag_page(f); - sg_set_page(&sg, page, skb_frag_size(f), f->page_offset); + unsigned int offset = f->page_offset; + struct page *page = skb_frag_page(f) + (offset >> PAGE_SHIFT); + + sg_set_page(&sg, page, skb_frag_size(f), + offset_in_page(offset)); if (crypto_hash_update(desc, &sg, skb_frag_size(f))) return 1; } -- cgit v1.2.3 From a3659aa09a2ee7e0028349b9100d8b4a7750a4be Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 13 May 2013 23:54:20 +0000 Subject: mv643xx_eth: fix NAPI weight being > 64 3.10-rc1 issues the following warning: netif_napi_add() called with weight 128 on device eth%d This patch reduce the weight to 64, using NAPI_POLL_WEIGHT. Signed-off-by: Andrew Lunn Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mv643xx_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index d0afeea181fb..8f63c36b2cdc 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -2745,7 +2745,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev) INIT_WORK(&mp->tx_timeout_task, tx_timeout_task); - netif_napi_add(dev, &mp->napi, mv643xx_eth_poll, 128); + netif_napi_add(dev, &mp->napi, mv643xx_eth_poll, NAPI_POLL_WEIGHT); init_timer(&mp->rx_oom); mp->rx_oom.data = (unsigned long)mp; -- cgit v1.2.3 From 8f174b1175a10903ade40f36eb6c896412877ca0 Mon Sep 17 00:00:00 2001 From: Joonsoo Kim Date: Wed, 1 May 2013 00:07:00 +0900 Subject: workqueue: correct handling of the pool spin_lock When we fail to mutex_trylock(), we release the pool spin_lock and do mutex_lock(). After that, we should regrab the pool spin_lock, but, regrabbing is missed in current code. So correct it. Cc: Lai Jiangshan Signed-off-by: Joonsoo Kim Signed-off-by: Tejun Heo --- kernel/workqueue.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 1ae602809efb..286847b90225 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -2059,6 +2059,7 @@ static bool manage_workers(struct worker *worker) if (unlikely(!mutex_trylock(&pool->manager_mutex))) { spin_unlock_irq(&pool->lock); mutex_lock(&pool->manager_mutex); + spin_lock_irq(&pool->lock); ret = true; } -- cgit v1.2.3 From ad7b1f841f8a54c6d61ff181451f55b68175e15a Mon Sep 17 00:00:00 2001 From: Marc Dionne Date: Mon, 6 May 2013 17:44:55 -0400 Subject: workqueue: Make schedule_work() available again to non GPL modules Commit 8425e3d5bdbe ("workqueue: inline trivial wrappers") changed schedule_work() and schedule_delayed_work() to inline wrappers, but these rely on some symbols that are EXPORT_SYMBOL_GPL, while the original functions were EXPORT_SYMBOL. This has the effect of changing the licensing requirement for these functions and making them unavailable to non GPL modules. Make them available again by removing the restriction on the required symbols. Signed-off-by: Marc Dionne Signed-off-by: Tejun Heo --- kernel/workqueue.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 286847b90225..02916f421385 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -296,7 +296,7 @@ static DEFINE_HASHTABLE(unbound_pool_hash, UNBOUND_POOL_HASH_ORDER); static struct workqueue_attrs *unbound_std_wq_attrs[NR_STD_WORKER_POOLS]; struct workqueue_struct *system_wq __read_mostly; -EXPORT_SYMBOL_GPL(system_wq); +EXPORT_SYMBOL(system_wq); struct workqueue_struct *system_highpri_wq __read_mostly; EXPORT_SYMBOL_GPL(system_highpri_wq); struct workqueue_struct *system_long_wq __read_mostly; @@ -1411,7 +1411,7 @@ bool queue_work_on(int cpu, struct workqueue_struct *wq, local_irq_restore(flags); return ret; } -EXPORT_SYMBOL_GPL(queue_work_on); +EXPORT_SYMBOL(queue_work_on); void delayed_work_timer_fn(unsigned long __data) { @@ -1485,7 +1485,7 @@ bool queue_delayed_work_on(int cpu, struct workqueue_struct *wq, local_irq_restore(flags); return ret; } -EXPORT_SYMBOL_GPL(queue_delayed_work_on); +EXPORT_SYMBOL(queue_delayed_work_on); /** * mod_delayed_work_on - modify delay of or queue a delayed work on specific CPU -- cgit v1.2.3 From b4f711ee03d28f776fd2324fd0bd999cc428e4d2 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Wed, 24 Apr 2013 11:32:56 -0700 Subject: time: Revert ALWAYS_USE_PERSISTENT_CLOCK compile time optimizaitons Kay Sievers noted that the ALWAYS_USE_PERSISTENT_CLOCK config, which enables some minor compile time optimization to avoid uncessary code in mostly the suspend/resume path could cause problems for userland. In particular, the dependency for RTC_HCTOSYS on !ALWAYS_USE_PERSISTENT_CLOCK, which avoids setting the time twice and simplifies suspend/resume, has the side effect of causing the /sys/class/rtc/rtcN/hctosys flag to always be zero, and this flag is commonly used by udev to setup the /dev/rtc symlink to /dev/rtcN, which can cause pain for older applications. While the udev rules could use some work to be less fragile, breaking userland should strongly be avoided. Additionally the compile time optimizations are fairly minor, and the code being optimized is likely to be reworked in the future, so lets revert this change. Reported-by: Kay Sievers Signed-off-by: John Stultz Cc: stable #3.9 Cc: Feng Tang Cc: Jason Gunthorpe Link: http://lkml.kernel.org/r/1366828376-18124-1-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 1 - drivers/rtc/Kconfig | 2 -- include/linux/time.h | 4 ---- kernel/time/Kconfig | 5 ----- 4 files changed, 12 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5db2117ae288..45c41249321f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -108,7 +108,6 @@ config X86 select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC) select GENERIC_TIME_VSYSCALL if X86_64 select KTIME_SCALAR if X86_32 - select ALWAYS_USE_PERSISTENT_CLOCK select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select HAVE_CONTEXT_TRACKING if X86_64 diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 0c81915b1997..b9838130a7b0 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -20,7 +20,6 @@ if RTC_CLASS config RTC_HCTOSYS bool "Set system time from RTC on startup and resume" default y - depends on !ALWAYS_USE_PERSISTENT_CLOCK help If you say yes here, the system time (wall clock) will be set using the value read from a specified RTC device. This is useful to avoid @@ -29,7 +28,6 @@ config RTC_HCTOSYS config RTC_SYSTOHC bool "Set the RTC time based on NTP synchronization" default y - depends on !ALWAYS_USE_PERSISTENT_CLOCK help If you say yes here, the system time (wall clock) will be stored in the RTC specified by RTC_HCTOSYS_DEVICE approximately every 11 diff --git a/include/linux/time.h b/include/linux/time.h index 22d81b3c955b..d5d229b2e5af 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -117,14 +117,10 @@ static inline bool timespec_valid_strict(const struct timespec *ts) extern bool persistent_clock_exist; -#ifdef ALWAYS_USE_PERSISTENT_CLOCK -#define has_persistent_clock() true -#else static inline bool has_persistent_clock(void) { return persistent_clock_exist; } -#endif extern void read_persistent_clock(struct timespec *ts); extern void read_boot_clock(struct timespec *ts); diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig index 24510d84efd7..b69692250af4 100644 --- a/kernel/time/Kconfig +++ b/kernel/time/Kconfig @@ -12,11 +12,6 @@ config CLOCKSOURCE_WATCHDOG config ARCH_CLOCKSOURCE_DATA bool -# Platforms has a persistent clock -config ALWAYS_USE_PERSISTENT_CLOCK - bool - default n - # Timekeeping vsyscall support config GENERIC_TIME_VSYSCALL bool -- cgit v1.2.3 From faff57a92ba1d7247c5e86ecea2886d2c9d54507 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 13 May 2013 02:24:11 +0000 Subject: net/802/mrp: fix lockdep splat commit fb745e9a037895 ("net/802/mrp: fix possible race condition when calling mrp_pdu_queue()") introduced a lockdep splat. [ 19.735147] ================================= [ 19.735235] [ INFO: inconsistent lock state ] [ 19.735324] 3.9.2-build-0063 #4 Not tainted [ 19.735412] --------------------------------- [ 19.735500] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 19.735592] rmmod/1840 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 19.735682] (&(&app->lock)->rlock#2){+.?...}, at: [] mrp_uninit_applicant+0x69/0xba [mrp] app->lock is normally taken under softirq context, so disable BH to avoid the splat. Reported-by: Denys Fedoryshchenko Signed-off-by: Eric Dumazet Cc: David Ward Cc: Cong Wang Tested-by: Eric Dumazet Signed-off-by: David S. Miller --- net/802/mrp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/802/mrp.c b/net/802/mrp.c index e085bcc754f6..1eb05d80b07b 100644 --- a/net/802/mrp.c +++ b/net/802/mrp.c @@ -871,10 +871,10 @@ void mrp_uninit_applicant(struct net_device *dev, struct mrp_application *appl) */ del_timer_sync(&app->join_timer); - spin_lock(&app->lock); + spin_lock_bh(&app->lock); mrp_mad_event(app, MRP_EVENT_TX); mrp_pdu_queue(app); - spin_unlock(&app->lock); + spin_unlock_bh(&app->lock); mrp_queue_xmit(app); -- cgit v1.2.3 From 581df9e1944194bfcabc57e1efae79b0fe171d6f Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 14 May 2013 03:00:16 +0000 Subject: net/macb: fix ISR clear-on-write behavior only for some SoC Commit 749a2b6 (net/macb: clear tx/rx completion flags in ISR) introduces clear-on-write on ISR register. This behavior is not always implemented when using Cadence MACB/GEM and is breaking other platforms. We are using the Design Configuration Register 1 information and a capability property to actually activate this clear-on-write behavior on ISR. Reported-by: Hein Tibosch Signed-off-by: Nicolas Ferre Tested-by: Hein Tibosch Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.c | 18 ++++++++++++++++-- drivers/net/ethernet/cadence/macb.h | 7 +++++++ 2 files changed, 23 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 6be513deb17f..c89aa41dd448 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -485,7 +485,8 @@ static void macb_tx_interrupt(struct macb *bp) status = macb_readl(bp, TSR); macb_writel(bp, TSR, status); - macb_writel(bp, ISR, MACB_BIT(TCOMP)); + if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE) + macb_writel(bp, ISR, MACB_BIT(TCOMP)); netdev_vdbg(bp->dev, "macb_tx_interrupt status = 0x%03lx\n", (unsigned long)status); @@ -738,7 +739,8 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) * now. */ macb_writel(bp, IDR, MACB_RX_INT_FLAGS); - macb_writel(bp, ISR, MACB_BIT(RCOMP)); + if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE) + macb_writel(bp, ISR, MACB_BIT(RCOMP)); if (napi_schedule_prep(&bp->napi)) { netdev_vdbg(bp->dev, "scheduling RX softirq\n"); @@ -1062,6 +1064,17 @@ static void macb_configure_dma(struct macb *bp) } } +/* + * Configure peripheral capacities according to integration options used + */ +static void macb_configure_caps(struct macb *bp) +{ + if (macb_is_gem(bp)) { + if (GEM_BF(IRQCOR, gem_readl(bp, DCFG1)) == 0) + bp->caps |= MACB_CAPS_ISR_CLEAR_ON_WRITE; + } +} + static void macb_init_hw(struct macb *bp) { u32 config; @@ -1084,6 +1097,7 @@ static void macb_init_hw(struct macb *bp) bp->duplex = DUPLEX_HALF; macb_configure_dma(bp); + macb_configure_caps(bp); /* Initialize TX and RX buffers */ macb_writel(bp, RBQP, bp->rx_ring_dma); diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h index 993d70380688..548c0ecae869 100644 --- a/drivers/net/ethernet/cadence/macb.h +++ b/drivers/net/ethernet/cadence/macb.h @@ -300,6 +300,8 @@ #define MACB_REV_SIZE 16 /* Bitfields in DCFG1. */ +#define GEM_IRQCOR_OFFSET 23 +#define GEM_IRQCOR_SIZE 1 #define GEM_DBWDEF_OFFSET 25 #define GEM_DBWDEF_SIZE 3 @@ -323,6 +325,9 @@ #define MACB_MAN_READ 2 #define MACB_MAN_CODE 2 +/* Capability mask bits */ +#define MACB_CAPS_ISR_CLEAR_ON_WRITE 0x1 + /* Bit manipulation macros */ #define MACB_BIT(name) \ (1 << MACB_##name##_OFFSET) @@ -574,6 +579,8 @@ struct macb { unsigned int speed; unsigned int duplex; + u32 caps; + phy_interface_t phy_interface; /* AT91RM9200 transmit */ -- cgit v1.2.3 From 7d19273cd0408f8520539d5d6b1f695cd311b109 Mon Sep 17 00:00:00 2001 From: Christian Ruppert Date: Fri, 10 May 2013 16:05:50 +0200 Subject: ARC: [TB10x] Remove redundant abilis,simple-pinctrl mechanism The TB10x platform port includes a custom mechanism using to set up default pin controller configurations using abilis,simple-default pin configurations of nodes compatible with abilis,simple-pinctrl. This mechanism is redundant with the Linux standard "default" pin configuration, see commit ab78029ecc347debbd737f06688d788bd9d60c1d "drivers/pinctrl: grab default handles from device core". This patch removes the TB10x custom mechanism in favour of the Linux standard. Signed-off-by: Christian Ruppert Reviewed-by: Stephen Warren Reviewed-by: Linus Walleij Signed-off-by: Vineet Gupta --- arch/arc/boot/dts/abilis_tb100_dvk.dts | 2 +- arch/arc/boot/dts/abilis_tb101_dvk.dts | 2 +- arch/arc/boot/dts/abilis_tb10x.dtsi | 6 ++---- arch/arc/plat-tb10x/tb10x.c | 26 -------------------------- 4 files changed, 4 insertions(+), 32 deletions(-) diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts index c0fd3623c393..0fa0d4abe795 100644 --- a/arch/arc/boot/dts/abilis_tb100_dvk.dts +++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts @@ -37,7 +37,7 @@ soc100 { uart@FF100000 { - pinctrl-names = "abilis,simple-default"; + pinctrl-names = "default"; pinctrl-0 = <&pctl_uart0>; }; ethernet@FE100000 { diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts index 6f8c381f6268..a4d80ce283ae 100644 --- a/arch/arc/boot/dts/abilis_tb101_dvk.dts +++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts @@ -37,7 +37,7 @@ soc100 { uart@FF100000 { - pinctrl-names = "abilis,simple-default"; + pinctrl-names = "default"; pinctrl-0 = <&pctl_uart0>; }; ethernet@FE100000 { diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi index a6139fc5aaa3..b97e3051ba4b 100644 --- a/arch/arc/boot/dts/abilis_tb10x.dtsi +++ b/arch/arc/boot/dts/abilis_tb10x.dtsi @@ -88,8 +88,7 @@ }; uart@FF100000 { - compatible = "snps,dw-apb-uart", - "abilis,simple-pinctrl"; + compatible = "snps,dw-apb-uart"; reg = <0xFF100000 0x100>; clock-frequency = <166666666>; interrupts = <25 1>; @@ -184,8 +183,7 @@ #address-cells = <1>; #size-cells = <0>; cell-index = <1>; - compatible = "abilis,tb100-spi", - "abilis,simple-pinctrl"; + compatible = "abilis,tb100-spi"; num-cs = <2>; reg = <0xFE011000 0x20>; interrupt-parent = <&tb10x_ictl>; diff --git a/arch/arc/plat-tb10x/tb10x.c b/arch/arc/plat-tb10x/tb10x.c index d3567691c7e1..06cb30929460 100644 --- a/arch/arc/plat-tb10x/tb10x.c +++ b/arch/arc/plat-tb10x/tb10x.c @@ -34,31 +34,6 @@ static void __init tb10x_platform_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static void __init tb10x_platform_late_init(void) -{ - struct device_node *dn; - - /* - * Pinctrl documentation recommends setting up the iomux here for - * all modules which don't require control over the pins themselves. - * Modules which need this kind of assistance are compatible with - * "abilis,simple-pinctrl", i.e. we can easily iterate over them. - * TODO: Does this recommended method work cleanly with pins required - * by modules? - */ - for_each_compatible_node(dn, NULL, "abilis,simple-pinctrl") { - struct platform_device *pd = of_find_device_by_node(dn); - struct pinctrl *pctl; - - pctl = pinctrl_get_select(&pd->dev, "abilis,simple-default"); - if (IS_ERR(pctl)) { - int ret = PTR_ERR(pctl); - dev_err(&pd->dev, "Could not set up pinctrl: %d\n", - ret); - } - } -} - static const char *tb10x_compat[] __initdata = { "abilis,arc-tb10x", NULL, @@ -67,5 +42,4 @@ static const char *tb10x_compat[] __initdata = { MACHINE_START(TB10x, "tb10x") .dt_compat = tb10x_compat, .init_machine = tb10x_platform_init, - .init_late = tb10x_platform_late_init, MACHINE_END -- cgit v1.2.3 From 19a280a61b520febab0f2fde94f4bd50250377b2 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sun, 12 May 2013 15:06:51 +0200 Subject: ARM: sunxi: select ARCH_REQUIRE_GPIOLIB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CONFIG_ARCH_SUNXI currently doesn't enable a gpiolib, which causes build problems when building a kernel with only the sunxi platform enabled. Select ARCH_REQUIRE_GPIOLIB to solve this. Signed-off-by: Maxime Ripard Tested-by: Emilio López --- arch/arm/mach-sunxi/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index d259c782d742..5b045e302b43 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,5 +1,6 @@ config ARCH_SUNXI bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select CLKSRC_OF select COMMON_CLK -- cgit v1.2.3 From d2bdbee0d91a5d3ba2e439ce889e20bfe6fd4f1b Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 14 May 2013 23:41:04 -0700 Subject: target/iblock: Fix WCE=1 + DPOFUA=1 backend WRITE regression This patch fixes a regression bug introduced in v3.9-rc1 where if the underlying struct block_device for a IBLOCK backend is configured with WCE=1 + DPOFUA=1 settings, the rw = WRITE assignment no longer occurs in iblock_execute_rw(), and rw = 0 is passed to iblock_submit_bios() in effect causing a READ bio operation to occur. The offending commit is: commit d0c8b259f8970d39354c1966853363345d401330 Author: Nicholas Bellinger Date: Tue Jan 29 22:10:06 2013 -0800 target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled status Note the WCE=1 + DPOFUA=0, WCE=0 + DPOFUA=1, and WCE=0 + DPOFUA=0 cases are not affected by this regression bug. Reported-by: Chris Boot Tested-by: Chris Boot Reported-by: Hannes Reinecke Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_iblock.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index 07f5f94634bb..aa1620abec6d 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -615,6 +615,8 @@ iblock_execute_rw(struct se_cmd *cmd) rw = WRITE_FUA; else if (!(q->flush_flags & REQ_FLUSH)) rw = WRITE_FUA; + else + rw = WRITE; } else { rw = WRITE; } -- cgit v1.2.3 From a1321ddd27e65c6ada5b9a12cae4ee2612d76893 Mon Sep 17 00:00:00 2001 From: Joern Engel Date: Mon, 13 May 2013 16:30:05 -0400 Subject: target: removed unused transport_state flag Signed-off-by: Joern Engel Signed-off-by: Nicholas Bellinger --- include/target/target_core_base.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 136b7b2f7b32..e773dfa5f98f 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -463,7 +463,6 @@ struct se_cmd { #define CMD_T_ABORTED (1 << 0) #define CMD_T_ACTIVE (1 << 1) #define CMD_T_COMPLETE (1 << 2) -#define CMD_T_QUEUED (1 << 3) #define CMD_T_SENT (1 << 4) #define CMD_T_STOP (1 << 5) #define CMD_T_FAILED (1 << 6) -- cgit v1.2.3 From ccf5ae83a6cf3d9cfe9a7038bfe7cd38ab03d5e1 Mon Sep 17 00:00:00 2001 From: Joern Engel Date: Mon, 13 May 2013 16:30:06 -0400 Subject: target: close target_put_sess_cmd() vs. core_tmr_abort_task() race It is possible for one thread to to take se_sess->sess_cmd_lock in core_tmr_abort_task() before taking a reference count on se_cmd->cmd_kref, while another thread in target_put_sess_cmd() drops se_cmd->cmd_kref before taking se_sess->sess_cmd_lock. This introduces kref_put_spinlock_irqsave() and uses it in target_put_sess_cmd() to close the race window. Signed-off-by: Joern Engel Acked-by: Greg Kroah-Hartman Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 11 +++++------ include/linux/kref.h | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 38 insertions(+), 6 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index c3477fa60942..4a793362309d 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2211,21 +2211,19 @@ static void target_release_cmd_kref(struct kref *kref) { struct se_cmd *se_cmd = container_of(kref, struct se_cmd, cmd_kref); struct se_session *se_sess = se_cmd->se_sess; - unsigned long flags; - spin_lock_irqsave(&se_sess->sess_cmd_lock, flags); if (list_empty(&se_cmd->se_cmd_list)) { - spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + spin_unlock(&se_sess->sess_cmd_lock); se_cmd->se_tfo->release_cmd(se_cmd); return; } if (se_sess->sess_tearing_down && se_cmd->cmd_wait_set) { - spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + spin_unlock(&se_sess->sess_cmd_lock); complete(&se_cmd->cmd_wait_comp); return; } list_del(&se_cmd->se_cmd_list); - spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + spin_unlock(&se_sess->sess_cmd_lock); se_cmd->se_tfo->release_cmd(se_cmd); } @@ -2236,7 +2234,8 @@ static void target_release_cmd_kref(struct kref *kref) */ int target_put_sess_cmd(struct se_session *se_sess, struct se_cmd *se_cmd) { - return kref_put(&se_cmd->cmd_kref, target_release_cmd_kref); + return kref_put_spinlock_irqsave(&se_cmd->cmd_kref, target_release_cmd_kref, + &se_sess->sess_cmd_lock); } EXPORT_SYMBOL(target_put_sess_cmd); diff --git a/include/linux/kref.h b/include/linux/kref.h index 4972e6e9ca93..7419c02085d7 100644 --- a/include/linux/kref.h +++ b/include/linux/kref.h @@ -19,6 +19,7 @@ #include #include #include +#include struct kref { atomic_t refcount; @@ -95,6 +96,38 @@ static inline int kref_put(struct kref *kref, void (*release)(struct kref *kref) return kref_sub(kref, 1, release); } +/** + * kref_put_spinlock_irqsave - decrement refcount for object. + * @kref: object. + * @release: pointer to the function that will clean up the object when the + * last reference to the object is released. + * This pointer is required, and it is not acceptable to pass kfree + * in as this function. + * @lock: lock to take in release case + * + * Behaves identical to kref_put with one exception. If the reference count + * drops to zero, the lock will be taken atomically wrt dropping the reference + * count. The release function has to call spin_unlock() without _irqrestore. + */ +static inline int kref_put_spinlock_irqsave(struct kref *kref, + void (*release)(struct kref *kref), + spinlock_t *lock) +{ + unsigned long flags; + + WARN_ON(release == NULL); + if (atomic_add_unless(&kref->refcount, -1, 1)) + return 0; + spin_lock_irqsave(lock, flags); + if (atomic_dec_and_test(&kref->refcount)) { + release(kref); + local_irq_restore(flags); + return 1; + } + spin_unlock_irqrestore(lock, flags); + return 0; +} + static inline int kref_put_mutex(struct kref *kref, void (*release)(struct kref *kref), struct mutex *lock) -- cgit v1.2.3 From b7a8ca5173ef9aa55fa039d7c216426ff0b25a12 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 15 May 2013 12:12:33 +0200 Subject: ARM: at91: rm9200 fix time support since commit 838a2ae80a6ab52139fb1bf0a93ea8c5eff94488 Author: Shawn Guo Date: Sat Jan 12 11:50:05 2013 +0000 ARM: use clockevents_config_and_register() where possible The timer is wrongly configured and result in a nice crash so revert it on rm9200 timer. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: stable # 3.8+ Cc: Shawn Guo Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/at91rm9200_time.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 2acdff4c1dfe..180b3024bec3 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -174,6 +174,7 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) static struct clock_event_device clkevt = { .name = "at91_tick", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, .rating = 150, .set_next_event = clkevt32k_next_event, .set_mode = clkevt32k_mode, @@ -264,9 +265,11 @@ void __init at91rm9200_timer_init(void) at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ + clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); + clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt); + clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1; clkevt.cpumask = cpumask_of(0); - clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, - 2, AT91_ST_ALMV); + clockevents_register_device(&clkevt); /* register clocksource */ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); -- cgit v1.2.3 From bb4b42ce0ca36af8c113587ab64b138b3cf5459c Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 8 May 2013 15:25:38 +0200 Subject: s390: fix gmap_ipte_notifier vs. software dirty pages On heavy paging load some guest cpus started to loop in gmap_ipte_notify. This was visible as stalled cpus inside the guest. The gmap_ipte_notifier tries to map a user page and then made sure that the pte is valid and writable. Turns out that with the software change bit tracking the pte can become read-only (and only software writable) if the page is clean. Since we loop in this code, the page would stay clean and, therefore, be never writable again. Let us just use fixup_user_fault, that guarantees to call handle_mm_fault. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- arch/s390/mm/pgtable.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 7805ddca833d..18dc417aaf79 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -677,8 +677,7 @@ int gmap_ipte_notify(struct gmap *gmap, unsigned long start, unsigned long len) break; } /* Get the page mapped */ - if (get_user_pages(current, gmap->mm, addr, 1, 1, 0, - NULL, NULL) != 1) { + if (fixup_user_fault(current, gmap->mm, addr, FAULT_FLAG_WRITE)) { rc = -EFAULT; break; } -- cgit v1.2.3 From aca91209775514b5a335e7ef11f1d636618590c7 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 13 May 2013 14:48:52 +0200 Subject: s390/ftrace: fix mcount adjustment Tony Jones reported that the ftrace self tests on s390 do not work: <6>Testing dynamic ftrace ops #1: (0 0 0 0 0) FAILED! <6>Testing tracer irqsoff: <3>failed to start irqsoff tracer <4>.. no entries found ..FAILED! <6>Testing tracer wakeup: <3>failed to start wakeup tracer <4>.. no entries found ..FAILED! <6>Testing tracer function_graph: <4>Failed to init function_graph tracer, init returned -19 <4>FAILED! This happens because we forgot to adjust the instruction pointer that gets passed to the ftrace trace function by MCOUNT_INSN_SIZE. In addition change MCOUNT_INSN_SIZE to the correct value on 31 bit. It only worked so far because the to be patched instruction was identical. Reported-by: Tony Jones Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/ftrace.h | 12 +++++++----- arch/s390/kernel/ftrace.c | 9 ++------- arch/s390/kernel/mcount.S | 2 ++ arch/s390/kernel/mcount64.S | 2 ++ 4 files changed, 13 insertions(+), 12 deletions(-) diff --git a/arch/s390/include/asm/ftrace.h b/arch/s390/include/asm/ftrace.h index b7931faaef6d..bf246dae1367 100644 --- a/arch/s390/include/asm/ftrace.h +++ b/arch/s390/include/asm/ftrace.h @@ -9,11 +9,6 @@ struct dyn_arch_ftrace { }; #define MCOUNT_ADDR ((long)_mcount) -#ifdef CONFIG_64BIT -#define MCOUNT_INSN_SIZE 12 -#else -#define MCOUNT_INSN_SIZE 20 -#endif static inline unsigned long ftrace_call_adjust(unsigned long addr) { @@ -21,4 +16,11 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr) } #endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_64BIT +#define MCOUNT_INSN_SIZE 12 +#else +#define MCOUNT_INSN_SIZE 22 +#endif + #endif /* _ASM_S390_FTRACE_H */ diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c index 78bdf0e5dff7..e3043aef87a9 100644 --- a/arch/s390/kernel/ftrace.c +++ b/arch/s390/kernel/ftrace.c @@ -16,12 +16,6 @@ #include #include -#ifdef CONFIG_64BIT -#define MCOUNT_OFFSET_RET 12 -#else -#define MCOUNT_OFFSET_RET 22 -#endif - #ifdef CONFIG_DYNAMIC_FTRACE void ftrace_disable_code(void); @@ -155,9 +149,10 @@ unsigned long __kprobes prepare_ftrace_return(unsigned long parent, if (unlikely(atomic_read(¤t->tracing_graph_pause))) goto out; + ip = (ip & PSW_ADDR_INSN) - MCOUNT_INSN_SIZE; if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY) goto out; - trace.func = (ip & PSW_ADDR_INSN) - MCOUNT_OFFSET_RET; + trace.func = ip; /* Only trace if the calling function expects to. */ if (!ftrace_graph_entry(&trace)) { current->curr_ret_stack--; diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S index 4567ce20d900..08dcf21cb8df 100644 --- a/arch/s390/kernel/mcount.S +++ b/arch/s390/kernel/mcount.S @@ -7,6 +7,7 @@ #include #include +#include .section .kprobes.text, "ax" @@ -33,6 +34,7 @@ ENTRY(ftrace_caller) la %r2,0(%r14) st %r0,__SF_BACKCHAIN(%r15) la %r3,0(%r3) + ahi %r2,-MCOUNT_INSN_SIZE l %r14,0b-0b(%r1) l %r14,0(%r14) basr %r14,%r14 diff --git a/arch/s390/kernel/mcount64.S b/arch/s390/kernel/mcount64.S index 11332193db30..1c52eae3396a 100644 --- a/arch/s390/kernel/mcount64.S +++ b/arch/s390/kernel/mcount64.S @@ -7,6 +7,7 @@ #include #include +#include .section .kprobes.text, "ax" @@ -29,6 +30,7 @@ ENTRY(ftrace_caller) stg %r1,__SF_BACKCHAIN(%r15) lgr %r2,%r14 lg %r3,168(%r15) + aghi %r2,-MCOUNT_INSN_SIZE larl %r14,ftrace_trace_function lg %r14,0(%r14) basr %r14,%r14 -- cgit v1.2.3 From 1dda2fa650da12a644c7cc8645707c912bdc5ab8 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 14 May 2013 17:00:38 +0200 Subject: pinctrl/lantiq: Free mapping configs for both pin and groups When creating mappings from DT both pin config and group config mappings are allocated. Free them both when destroying the mappings. Signed-off-by: Laurent Pinchart Acked-by: John Crispin Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-lantiq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-lantiq.c b/drivers/pinctrl/pinctrl-lantiq.c index 615c5002b757..d22ca252b80d 100644 --- a/drivers/pinctrl/pinctrl-lantiq.c +++ b/drivers/pinctrl/pinctrl-lantiq.c @@ -52,7 +52,8 @@ static void ltq_pinctrl_dt_free_map(struct pinctrl_dev *pctldev, int i; for (i = 0; i < num_maps; i++) - if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN) + if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN || + map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP) kfree(map[i].data.configs.configs); kfree(map); } -- cgit v1.2.3 From 8cdb46da06ea94543a3b2e53e3e92736421d1093 Mon Sep 17 00:00:00 2001 From: Hans Schillstrom Date: Wed, 15 May 2013 01:23:45 +0000 Subject: netfilter: log: netns NULL ptr bug when calling from conntrack Since (69b34fb netfilter: xt_LOG: add net namespace support for xt_LOG), we hit this: [ 4224.708977] BUG: unable to handle kernel NULL pointer dereference at 0000000000000388 [ 4224.709074] IP: [] ipt_log_packet+0x29/0x270 when callling log functions from conntrack both in and out are NULL i.e. the net pointer is invalid. Adding struct net *net in call to nf_logfn() will secure that there always is a vaild net ptr. Reported as netfilter's bugzilla bug 818: https://bugzilla.netfilter.org/show_bug.cgi?id=818 Reported-by: Ronald Signed-off-by: Hans Schillstrom Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_log.h | 3 ++- include/net/netfilter/nfnetlink_log.h | 3 ++- net/bridge/netfilter/ebt_log.c | 11 +++++------ net/bridge/netfilter/ebt_ulog.c | 18 +++++++++++------- net/ipv4/netfilter/ipt_ULOG.c | 13 ++++++++----- net/netfilter/nf_log.c | 2 +- net/netfilter/nfnetlink_log.c | 4 ++-- net/netfilter/xt_LOG.c | 13 +++++++------ net/netfilter/xt_NFLOG.c | 3 ++- 9 files changed, 40 insertions(+), 30 deletions(-) diff --git a/include/net/netfilter/nf_log.h b/include/net/netfilter/nf_log.h index 31f1fb9eb784..99eac12d040b 100644 --- a/include/net/netfilter/nf_log.h +++ b/include/net/netfilter/nf_log.h @@ -30,7 +30,8 @@ struct nf_loginfo { } u; }; -typedef void nf_logfn(u_int8_t pf, +typedef void nf_logfn(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, diff --git a/include/net/netfilter/nfnetlink_log.h b/include/net/netfilter/nfnetlink_log.h index e2dec42c2db2..5ca3f14f0998 100644 --- a/include/net/netfilter/nfnetlink_log.h +++ b/include/net/netfilter/nfnetlink_log.h @@ -2,7 +2,8 @@ #define _KER_NFNETLINK_LOG_H void -nfulnl_log_packet(u_int8_t pf, +nfulnl_log_packet(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, diff --git a/net/bridge/netfilter/ebt_log.c b/net/bridge/netfilter/ebt_log.c index 9878eb8204c5..19c37a4929bc 100644 --- a/net/bridge/netfilter/ebt_log.c +++ b/net/bridge/netfilter/ebt_log.c @@ -72,13 +72,12 @@ print_ports(const struct sk_buff *skb, uint8_t protocol, int offset) } static void -ebt_log_packet(u_int8_t pf, unsigned int hooknum, - const struct sk_buff *skb, const struct net_device *in, - const struct net_device *out, const struct nf_loginfo *loginfo, - const char *prefix) +ebt_log_packet(struct net *net, u_int8_t pf, unsigned int hooknum, + const struct sk_buff *skb, const struct net_device *in, + const struct net_device *out, const struct nf_loginfo *loginfo, + const char *prefix) { unsigned int bitmask; - struct net *net = dev_net(in ? in : out); /* FIXME: Disabled from containers until syslog ns is supported */ if (!net_eq(net, &init_net)) @@ -191,7 +190,7 @@ ebt_log_tg(struct sk_buff *skb, const struct xt_action_param *par) nf_log_packet(net, NFPROTO_BRIDGE, par->hooknum, skb, par->in, par->out, &li, "%s", info->prefix); else - ebt_log_packet(NFPROTO_BRIDGE, par->hooknum, skb, par->in, + ebt_log_packet(net, NFPROTO_BRIDGE, par->hooknum, skb, par->in, par->out, &li, info->prefix); return EBT_CONTINUE; } diff --git a/net/bridge/netfilter/ebt_ulog.c b/net/bridge/netfilter/ebt_ulog.c index fc1905c51417..df0364aa12d5 100644 --- a/net/bridge/netfilter/ebt_ulog.c +++ b/net/bridge/netfilter/ebt_ulog.c @@ -131,14 +131,16 @@ static struct sk_buff *ulog_alloc_skb(unsigned int size) return skb; } -static void ebt_ulog_packet(unsigned int hooknr, const struct sk_buff *skb, - const struct net_device *in, const struct net_device *out, - const struct ebt_ulog_info *uloginfo, const char *prefix) +static void ebt_ulog_packet(struct net *net, unsigned int hooknr, + const struct sk_buff *skb, + const struct net_device *in, + const struct net_device *out, + const struct ebt_ulog_info *uloginfo, + const char *prefix) { ebt_ulog_packet_msg_t *pm; size_t size, copy_len; struct nlmsghdr *nlh; - struct net *net = dev_net(in ? in : out); struct ebt_ulog_net *ebt = ebt_ulog_pernet(net); unsigned int group = uloginfo->nlgroup; ebt_ulog_buff_t *ub = &ebt->ulog_buffers[group]; @@ -233,7 +235,7 @@ unlock: } /* this function is registered with the netfilter core */ -static void ebt_log_packet(u_int8_t pf, unsigned int hooknum, +static void ebt_log_packet(struct net *net, u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, const struct net_device *out, const struct nf_loginfo *li, const char *prefix) @@ -252,13 +254,15 @@ static void ebt_log_packet(u_int8_t pf, unsigned int hooknum, strlcpy(loginfo.prefix, prefix, sizeof(loginfo.prefix)); } - ebt_ulog_packet(hooknum, skb, in, out, &loginfo, prefix); + ebt_ulog_packet(net, hooknum, skb, in, out, &loginfo, prefix); } static unsigned int ebt_ulog_tg(struct sk_buff *skb, const struct xt_action_param *par) { - ebt_ulog_packet(par->hooknum, skb, par->in, par->out, + struct net *net = dev_net(par->in ? par->in : par->out); + + ebt_ulog_packet(net, par->hooknum, skb, par->in, par->out, par->targinfo, NULL); return EBT_CONTINUE; } diff --git a/net/ipv4/netfilter/ipt_ULOG.c b/net/ipv4/netfilter/ipt_ULOG.c index f8a222cb6448..cf08218ddbcf 100644 --- a/net/ipv4/netfilter/ipt_ULOG.c +++ b/net/ipv4/netfilter/ipt_ULOG.c @@ -162,7 +162,8 @@ static struct sk_buff *ulog_alloc_skb(unsigned int size) return skb; } -static void ipt_ulog_packet(unsigned int hooknum, +static void ipt_ulog_packet(struct net *net, + unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, const struct net_device *out, @@ -174,7 +175,6 @@ static void ipt_ulog_packet(unsigned int hooknum, size_t size, copy_len; struct nlmsghdr *nlh; struct timeval tv; - struct net *net = dev_net(in ? in : out); struct ulog_net *ulog = ulog_pernet(net); /* ffs == find first bit set, necessary because userspace @@ -291,12 +291,15 @@ alloc_failure: static unsigned int ulog_tg(struct sk_buff *skb, const struct xt_action_param *par) { - ipt_ulog_packet(par->hooknum, skb, par->in, par->out, + struct net *net = dev_net(par->in ? par->in : par->out); + + ipt_ulog_packet(net, par->hooknum, skb, par->in, par->out, par->targinfo, NULL); return XT_CONTINUE; } -static void ipt_logfn(u_int8_t pf, +static void ipt_logfn(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, @@ -318,7 +321,7 @@ static void ipt_logfn(u_int8_t pf, strlcpy(loginfo.prefix, prefix, sizeof(loginfo.prefix)); } - ipt_ulog_packet(hooknum, skb, in, out, &loginfo, prefix); + ipt_ulog_packet(net, hooknum, skb, in, out, &loginfo, prefix); } static int ulog_tg_check(const struct xt_tgchk_param *par) diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index 757951d251e3..3b18dd1be7d9 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -148,7 +148,7 @@ void nf_log_packet(struct net *net, va_start(args, fmt); vsnprintf(prefix, sizeof(prefix), fmt, args); va_end(args); - logger->logfn(pf, hooknum, skb, in, out, loginfo, prefix); + logger->logfn(net, pf, hooknum, skb, in, out, loginfo, prefix); } rcu_read_unlock(); } diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index d83d881002a6..962e9792e317 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -602,7 +602,8 @@ static struct nf_loginfo default_loginfo = { /* log handler for internal netfilter logging api */ void -nfulnl_log_packet(u_int8_t pf, +nfulnl_log_packet(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, @@ -615,7 +616,6 @@ nfulnl_log_packet(u_int8_t pf, const struct nf_loginfo *li; unsigned int qthreshold; unsigned int plen; - struct net *net = dev_net(in ? in : out); struct nfnl_log_net *log = nfnl_log_pernet(net); if (li_user && li_user->type == NF_LOG_TYPE_ULOG) diff --git a/net/netfilter/xt_LOG.c b/net/netfilter/xt_LOG.c index fe573f6c9e91..491c7d821a0b 100644 --- a/net/netfilter/xt_LOG.c +++ b/net/netfilter/xt_LOG.c @@ -466,7 +466,8 @@ log_packet_common(struct sbuff *m, static void -ipt_log_packet(u_int8_t pf, +ipt_log_packet(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, @@ -475,7 +476,6 @@ ipt_log_packet(u_int8_t pf, const char *prefix) { struct sbuff *m; - struct net *net = dev_net(in ? in : out); /* FIXME: Disabled from containers until syslog ns is supported */ if (!net_eq(net, &init_net)) @@ -797,7 +797,8 @@ fallback: } static void -ip6t_log_packet(u_int8_t pf, +ip6t_log_packet(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, @@ -806,7 +807,6 @@ ip6t_log_packet(u_int8_t pf, const char *prefix) { struct sbuff *m; - struct net *net = dev_net(in ? in : out); /* FIXME: Disabled from containers until syslog ns is supported */ if (!net_eq(net, &init_net)) @@ -833,17 +833,18 @@ log_tg(struct sk_buff *skb, const struct xt_action_param *par) { const struct xt_log_info *loginfo = par->targinfo; struct nf_loginfo li; + struct net *net = dev_net(par->in ? par->in : par->out); li.type = NF_LOG_TYPE_LOG; li.u.log.level = loginfo->level; li.u.log.logflags = loginfo->logflags; if (par->family == NFPROTO_IPV4) - ipt_log_packet(NFPROTO_IPV4, par->hooknum, skb, par->in, + ipt_log_packet(net, NFPROTO_IPV4, par->hooknum, skb, par->in, par->out, &li, loginfo->prefix); #if IS_ENABLED(CONFIG_IP6_NF_IPTABLES) else if (par->family == NFPROTO_IPV6) - ip6t_log_packet(NFPROTO_IPV6, par->hooknum, skb, par->in, + ip6t_log_packet(net, NFPROTO_IPV6, par->hooknum, skb, par->in, par->out, &li, loginfo->prefix); #endif else diff --git a/net/netfilter/xt_NFLOG.c b/net/netfilter/xt_NFLOG.c index a17dd0f589b2..fb7497c928a0 100644 --- a/net/netfilter/xt_NFLOG.c +++ b/net/netfilter/xt_NFLOG.c @@ -26,13 +26,14 @@ nflog_tg(struct sk_buff *skb, const struct xt_action_param *par) { const struct xt_nflog_info *info = par->targinfo; struct nf_loginfo li; + struct net *net = dev_net(par->in ? par->in : par->out); li.type = NF_LOG_TYPE_ULOG; li.u.ulog.copy_len = info->len; li.u.ulog.group = info->group; li.u.ulog.qthreshold = info->threshold; - nfulnl_log_packet(par->family, par->hooknum, skb, par->in, + nfulnl_log_packet(net, par->family, par->hooknum, skb, par->in, par->out, &li, info->prefix); return XT_CONTINUE; } -- cgit v1.2.3 From 74ba4ec7a2036f9dbe5fcc85c7c737222005507f Mon Sep 17 00:00:00 2001 From: Emilio López Date: Wed, 15 May 2013 09:36:41 -0300 Subject: ARM: ux500: select REGULATOR MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MACH_MOP500 selects REGULATOR_FIXED_VOLTAGE but not REGULATOR. This patch makes it select the latter too. Seen as: warning: (MACH_DOVE_DT && ARCH_KIRKWOOD_DT && MACH_AMS_DELTA && MACH_MOP500 && TPS6105X) selects REGULATOR_FIXED_VOLTAGE which has unmet direct dependencies (REGULATOR) Signed-off-by: Emilio López Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 6a4387e39df8..b19b07204aaf 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -51,6 +51,7 @@ config MACH_MOP500 bool "U8500 Development platform, MOP500 versions" select I2C select I2C_NOMADIK + select REGULATOR select REGULATOR_FIXED_VOLTAGE select SOC_BUS select UX500_SOC_DB8500 -- cgit v1.2.3 From c8c18883ba8b8c7f2d9d463c8cf948b944e3c2df Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 25 Apr 2013 17:29:05 +0800 Subject: usb: gadget: zero: fix error return code in zero_bind() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Introduced by commit cf9a08ae5aece88987bbeee8eb0dd0ebb5015815 (usb: gadget: convert source sink and loopback to new function interface) Acked-by: Michal Nazarewicz Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/gadget/zero.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 2cd6262e8b71..0deb9d6cde26 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -284,12 +284,16 @@ static int __init zero_bind(struct usb_composite_dev *cdev) ss_opts->bulk_buflen = gzero_options.bulk_buflen; func_ss = usb_get_function(func_inst_ss); - if (IS_ERR(func_ss)) + if (IS_ERR(func_ss)) { + status = PTR_ERR(func_ss); goto err_put_func_inst_ss; + } func_inst_lb = usb_get_function_instance("Loopback"); - if (IS_ERR(func_inst_lb)) + if (IS_ERR(func_inst_lb)) { + status = PTR_ERR(func_inst_lb); goto err_put_func_ss; + } lb_opts = container_of(func_inst_lb, struct f_lb_opts, func_inst); lb_opts->bulk_buflen = gzero_options.bulk_buflen; -- cgit v1.2.3 From 4b7e450fb5cefb5865c77999a675330206ab3b8a Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 26 Apr 2013 14:27:09 +0800 Subject: usb: musb: omap2430: add missing platform_device_put() on error in omap2430_probe() Add the missing platform_device_put() before return from omap2430_probe() in the error handling case. Introduced by commit ca784be36cc725bca9b526eba342de7550329731 (usb: start using the control module driver) Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/musb/omap2430.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 3551f1a30c65..628b93fe5ccc 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -549,7 +549,8 @@ static int omap2430_probe(struct platform_device *pdev) glue->control_otghs = omap_get_control_dev(); if (IS_ERR(glue->control_otghs)) { dev_vdbg(&pdev->dev, "Failed to get control device\n"); - return -ENODEV; + ret = PTR_ERR(glue->control_otghs); + goto err2; } } else { glue->control_otghs = ERR_PTR(-ENODEV); -- cgit v1.2.3 From de97f250394996f5acb07ba9e6dbdfc15ee4316c Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Thu, 2 May 2013 09:51:44 -0400 Subject: Correct typo "supperspeed" to "superspeed". Tidy up kernel-doc content for USB GADGET. No functional change. Signed-off-by: Robert P. J. Day Signed-off-by: Felipe Balbi --- include/linux/usb/gadget.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index c454a88abf2e..f1b0dca60f12 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -563,9 +563,8 @@ static inline int gadget_is_dualspeed(struct usb_gadget *g) } /** - * gadget_is_superspeed() - return true if the hardware handles - * supperspeed - * @g: controller that might support supper speed + * gadget_is_superspeed() - return true if the hardware handles superspeed + * @g: controller that might support superspeed */ static inline int gadget_is_superspeed(struct usb_gadget *g) { -- cgit v1.2.3 From 21c7dee52c02cb4c14f839f16ab538215e52ba13 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Thu, 2 May 2013 10:28:33 -0400 Subject: Add a couple kernel-doc lines to prevent warnings. No functional change. Signed-off-by: Robert P. J. Day Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_ecm.c | 1 + drivers/usb/gadget/f_subset.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c index d893d6929079..abf8a31ae146 100644 --- a/drivers/usb/gadget/f_ecm.c +++ b/drivers/usb/gadget/f_ecm.c @@ -816,6 +816,7 @@ ecm_unbind(struct usb_configuration *c, struct usb_function *f) * @c: the configuration to support the network link * @ethaddr: a buffer in which the ethernet address of the host side * side of the link was recorded + * @dev: eth_dev structure * Context: single threaded during gadget setup * * Returns zero on success, else negative errno. diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c index 185d6f5e4e4d..7be04b342494 100644 --- a/drivers/usb/gadget/f_subset.c +++ b/drivers/usb/gadget/f_subset.c @@ -373,6 +373,7 @@ geth_unbind(struct usb_configuration *c, struct usb_function *f) * @c: the configuration to support the network link * @ethaddr: a buffer in which the ethernet address of the host side * side of the link was recorded + * @dev: eth_dev structure * Context: single threaded during gadget setup * * Returns zero on success, else negative errno. -- cgit v1.2.3 From fb00d6931ab9154cb4d66891909e54907be0798f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:07:19 +0530 Subject: usb: gadget: atmel_usba_udc: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Acked-by: Nicolas Ferre Signed-off-by: Sachin Kamat Signed-off-by: Felipe Balbi --- drivers/usb/gadget/atmel_usba_udc.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index f2a970f75bfa..5a5128a226f7 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -1992,8 +1992,6 @@ err_map_regs: err_get_hclk: clk_put(pclk); - platform_set_drvdata(pdev, NULL); - return ret; } -- cgit v1.2.3 From e80ad12389e12813888b7ce45d6f5986d6f41779 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:07:20 +0530 Subject: usb: gadget: bcm63xx_udc: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Cc: Kevin Cernekee Signed-off-by: Felipe Balbi --- drivers/usb/gadget/bcm63xx_udc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c index 6e6518264c42..9780c5708da8 100644 --- a/drivers/usb/gadget/bcm63xx_udc.c +++ b/drivers/usb/gadget/bcm63xx_udc.c @@ -2420,7 +2420,6 @@ static int bcm63xx_udc_remove(struct platform_device *pdev) usb_del_gadget_udc(&udc->gadget); BUG_ON(udc->driver); - platform_set_drvdata(pdev, NULL); bcm63xx_uninit_udc_hw(udc); return 0; -- cgit v1.2.3 From a0c67276ee46a034ed1016fa4d8a1d54ab73aa15 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:07:21 +0530 Subject: usb: gadget: dummy_hcd: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Cc: Alan Stern Signed-off-by: Felipe Balbi --- drivers/usb/gadget/dummy_hcd.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index a792e322f4f1..22236ecb2e29 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -1001,7 +1001,6 @@ static int dummy_udc_remove(struct platform_device *pdev) struct dummy *dum = platform_get_drvdata(pdev); usb_del_gadget_udc(&dum->gadget); - platform_set_drvdata(pdev, NULL); device_remove_file(&dum->gadget.dev, &dev_attr_function); return 0; } -- cgit v1.2.3 From a038391d8dcdb1408dcfd80c896fed98ac848cb2 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:07:22 +0530 Subject: usb: gadget: f_uac2: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Acked-by: Jaswinder Singh Signed-off-by: Sachin Kamat Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_uac2.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c index c7468b6c07b0..03c1fb686644 100644 --- a/drivers/usb/gadget/f_uac2.c +++ b/drivers/usb/gadget/f_uac2.c @@ -456,8 +456,6 @@ static int snd_uac2_remove(struct platform_device *pdev) { struct snd_card *card = platform_get_drvdata(pdev); - platform_set_drvdata(pdev, NULL); - if (card) return snd_card_free(card); -- cgit v1.2.3 From 2673976f7a80dfdf1b590e40c773aee01e62ada7 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:07:23 +0530 Subject: usb: gadget: imx_udc: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Cc: Darius Augulis Signed-off-by: Felipe Balbi --- drivers/usb/gadget/imx_udc.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index b5cebd6b0d7a..9b2d24e4c95f 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -1511,8 +1511,6 @@ static int __exit imx_udc_remove(struct platform_device *pdev) if (pdata->exit) pdata->exit(&pdev->dev); - platform_set_drvdata(pdev, NULL); - return 0; } -- cgit v1.2.3 From c0b4e04d1a984dec4d6704ac3fcf289b1cb32993 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:07:24 +0530 Subject: usb: gadget: pxa25x_udc: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Cc: Eric Miao Signed-off-by: Felipe Balbi --- drivers/usb/gadget/pxa25x_udc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index ef47495dec8f..95c531d5aa4f 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -2236,7 +2236,6 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev) dev->transceiver = NULL; } - platform_set_drvdata(pdev, NULL); the_controller = NULL; return 0; } -- cgit v1.2.3 From 03fc1d84e13a26cdbd376b3a2658a64d2b978cd3 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:07:25 +0530 Subject: usb: gadget: s3c2410_udc: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Signed-off-by: Felipe Balbi --- drivers/usb/gadget/s3c2410_udc.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index d0e75e1b3ccb..7f5e3a66d02a 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1948,8 +1948,6 @@ static int s3c2410_udc_remove(struct platform_device *pdev) iounmap(base_addr); release_mem_region(rsrc_start, rsrc_len); - platform_set_drvdata(pdev, NULL); - if (!IS_ERR(udc_clock) && udc_clock != NULL) { clk_disable(udc_clock); clk_put(udc_clock); -- cgit v1.2.3 From c8a0b5c687bfc3fce4bcc6a1e7c354f40b38bbc9 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:22:19 +0530 Subject: usb: phy: ab8500-usb: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-ab8500-usb.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c index 4acef26a2ef5..e5eb1b5a04eb 100644 --- a/drivers/usb/phy/phy-ab8500-usb.c +++ b/drivers/usb/phy/phy-ab8500-usb.c @@ -892,8 +892,6 @@ static int ab8500_usb_remove(struct platform_device *pdev) else if (ab->mode == USB_PERIPHERAL) ab8500_usb_peri_phy_dis(ab); - platform_set_drvdata(pdev, NULL); - return 0; } -- cgit v1.2.3 From a9b1bddc7a171c89b4fd4c132202b5b2118f3905 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:22:20 +0530 Subject: usb: phy: gpio-vbus-usb: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Cc: Philipp Zabel Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-gpio-vbus-usb.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c index 4c76074e518d..1d32af2ee403 100644 --- a/drivers/usb/phy/phy-gpio-vbus-usb.c +++ b/drivers/usb/phy/phy-gpio-vbus-usb.c @@ -343,7 +343,6 @@ err_irq: gpio_free(pdata->gpio_pullup); gpio_free(pdata->gpio_vbus); err_gpio: - platform_set_drvdata(pdev, NULL); kfree(gpio_vbus->phy.otg); kfree(gpio_vbus); return err; @@ -365,7 +364,6 @@ static int __exit gpio_vbus_remove(struct platform_device *pdev) if (gpio_is_valid(pdata->gpio_pullup)) gpio_free(pdata->gpio_pullup); gpio_free(gpio); - platform_set_drvdata(pdev, NULL); kfree(gpio_vbus->phy.otg); kfree(gpio_vbus); -- cgit v1.2.3 From c21b7eeaeeb8cdeecbb3c14204eecf604071620f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:22:21 +0530 Subject: usb: phy: mv-usb: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Cc: Chao Xie Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-mv-usb.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c index c987bbe27851..4a6b03c73876 100644 --- a/drivers/usb/phy/phy-mv-usb.c +++ b/drivers/usb/phy/phy-mv-usb.c @@ -667,7 +667,6 @@ int mv_otg_remove(struct platform_device *pdev) mv_otg_disable(mvotg); usb_remove_phy(&mvotg->phy); - platform_set_drvdata(pdev, NULL); return 0; } @@ -850,8 +849,6 @@ err_destroy_workqueue: flush_workqueue(mvotg->qwork); destroy_workqueue(mvotg->qwork); - platform_set_drvdata(pdev, NULL); - return retval; } -- cgit v1.2.3 From 99f80cfc00084a4aa87372095cca7a279db12ce2 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:22:22 +0530 Subject: usb: phy: mxs-usb: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Cc: Marek Vasut Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-mxs-usb.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 9d4381e64d51..3b642778cdff 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -180,8 +180,6 @@ static int mxs_phy_remove(struct platform_device *pdev) usb_remove_phy(&mxs_phy->phy); - platform_set_drvdata(pdev, NULL); - return 0; } -- cgit v1.2.3 From 9eff37a8713939f218ab8bf0dc93f1d67af7b8b4 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 5 Nov 2012 09:42:17 +0300 Subject: xen/privcmd: fix condition in privcmd_close() The parenthesis are in the wrong place so the original code is equivalent to: if (!xen_feature(XENFEAT_writable_descriptor_tables)) { ... Which obviously was not intended. Signed-off-by: Dan Carpenter Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/privcmd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index ca2b00e9d558..2cfc24d76fc5 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -504,7 +504,7 @@ static void privcmd_close(struct vm_area_struct *vma) struct page **pages = vma->vm_private_data; int numpgs = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; - if (!xen_feature(XENFEAT_auto_translated_physmap || !numpgs || !pages)) + if (!xen_feature(XENFEAT_auto_translated_physmap) || !numpgs || !pages) return; xen_unmap_domain_mfn_range(vma, numpgs, pages); -- cgit v1.2.3 From 8fe61203687a67eb1db338a4b7198a8037ca96c8 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 May 2013 17:22:23 +0530 Subject: usb: phy: nop: Remove redundant platform_set_drvdata() Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-nop.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/phy/phy-nop.c b/drivers/usb/phy/phy-nop.c index 2b10cc969bbb..638cc5dade35 100644 --- a/drivers/usb/phy/phy-nop.c +++ b/drivers/usb/phy/phy-nop.c @@ -254,8 +254,6 @@ static int nop_usb_xceiv_remove(struct platform_device *pdev) usb_remove_phy(&nop->phy); - platform_set_drvdata(pdev, NULL); - return 0; } -- cgit v1.2.3 From b25e5f1c4416cf96fac0918a8f1b0429642570a9 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 19:47:44 +0800 Subject: usb: musb: dsps: fix error return code in dsps_create_musb_pdev() Fix to return -ENOMEM in the devm_kzalloc() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_dsps.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 3a18e44e9391..e1b661d04021 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -560,6 +560,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) if (!config) { dev_err(&pdev->dev, "failed to allocate musb hdrc config\n"); + ret = -ENOMEM; goto err2; } -- cgit v1.2.3 From 48ad20f32d1153ad6a0a95ad2bfc391daa13fcad Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 19:48:22 +0800 Subject: usb: gadget: s3c2410_udc: fix error return code in s3c2410_udc_probe() Fix to return a negative error code in the gpio_to_irq() error handling case instead of 0, as done elsewhere in this function. Reviewed-by: Jingoo Han Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/gadget/s3c2410_udc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 7f5e3a66d02a..09c4f70c93c4 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1851,6 +1851,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev) irq = gpio_to_irq(udc_info->vbus_pin); if (irq < 0) { dev_err(dev, "no irq for gpio vbus pin\n"); + retval = irq; goto err_gpio_claim; } -- cgit v1.2.3 From f3423d3258cd9939c06df75a582b16d52fc2249f Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 19:48:50 +0800 Subject: usb: gadget: r8a66597-udc: fix error return code in r8a66597_probe() Fix to return -ENOMEM in the request alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/gadget/r8a66597-udc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 0b742d171843..7ff7d9cf2061 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -1977,8 +1977,10 @@ static int __init r8a66597_probe(struct platform_device *pdev) r8a66597->ep0_req = r8a66597_alloc_request(&r8a66597->ep[0].ep, GFP_KERNEL); - if (r8a66597->ep0_req == NULL) + if (r8a66597->ep0_req == NULL) { + ret = -ENOMEM; goto clean_up3; + } r8a66597->ep0_req->complete = nop_completion; ret = usb_add_gadget_udc(&pdev->dev, &r8a66597->gadget); -- cgit v1.2.3 From ef89a1f3a84d127bdcda7e4dd54f763d2f88203f Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 19:49:08 +0800 Subject: usb: gadget: m66592-udc: fix error return code in m66592_probe() Fix to return -ENOMEM in the request alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/gadget/m66592-udc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 866ef0999247..51cfe72da5bb 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -1660,8 +1660,10 @@ static int __init m66592_probe(struct platform_device *pdev) m66592->epaddr2ep[0] = &m66592->ep[0]; m66592->ep0_req = m66592_alloc_request(&m66592->ep[0].ep, GFP_KERNEL); - if (m66592->ep0_req == NULL) + if (m66592->ep0_req == NULL) { + ret = -ENOMEM; goto clean_up3; + } m66592->ep0_req->complete = nop_completion; init_controller(m66592); -- cgit v1.2.3 From c3661951032d002d710c2187c5d9dbc8b4cabfa2 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 19:49:37 +0800 Subject: usb: gadget: fusb300_udc: fix error return code in fusb300_probe() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/gadget/fusb300_udc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c index cec8871b77f9..b8632d40f8bf 100644 --- a/drivers/usb/gadget/fusb300_udc.c +++ b/drivers/usb/gadget/fusb300_udc.c @@ -1461,8 +1461,10 @@ static int __init fusb300_probe(struct platform_device *pdev) fusb300->ep0_req = fusb300_alloc_request(&fusb300->ep[0]->ep, GFP_KERNEL); - if (fusb300->ep0_req == NULL) + if (fusb300->ep0_req == NULL) { + ret = -ENOMEM; goto clean_up3; + } init_controller(fusb300); ret = usb_add_gadget_udc(&pdev->dev, &fusb300->gadget); -- cgit v1.2.3 From 481d30427e5506fc1f5c27bbb94faef9d1ec72a0 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 19:50:06 +0800 Subject: usb: gadget: dummy_hcd: fix error return code in init() Fix to return -ENOMEM in the kzalloc() error handling case instead of 0(following platform_device_add_data() will overwrite it to 0), as done elsewhere in this function. Acked-by: Alan Stern Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/gadget/dummy_hcd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 22236ecb2e29..c588e8e486e5 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -2660,8 +2660,10 @@ static int __init init(void) } for (i = 0; i < mod_data.num; i++) { dum[i] = kzalloc(sizeof(struct dummy), GFP_KERNEL); - if (!dum[i]) + if (!dum[i]) { + retval = -ENOMEM; goto err_add_pdata; + } retval = platform_device_add_data(the_hcd_pdev[i], &dum[i], sizeof(void *)); if (retval) -- cgit v1.2.3 From fea77077d1623c6a8d586266cf55c2289360bea3 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 19:50:31 +0800 Subject: usb: gadget: fix error return code in configfs_composite_bind() Fix to return a negative error code in the go through all configs error handling case instead of 0(usb_add_function() will overwrite ret to 0). Also use error code from usb_gstrings_attach() in all strings init error case instead of -EINVAL. Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/gadget/configfs.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index 3d5cfc9c2c78..80e7f75a56c7 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -821,8 +821,10 @@ static int configfs_composite_bind(struct usb_gadget *gadget, gi->gstrings[i] = NULL; s = usb_gstrings_attach(&gi->cdev, gi->gstrings, USB_GADGET_FIRST_AVAIL_IDX); - if (IS_ERR(s)) + if (IS_ERR(s)) { + ret = PTR_ERR(s); goto err_comp_cleanup; + } gi->cdev.desc.iManufacturer = s[USB_GADGET_MANUFACTURER_IDX].id; gi->cdev.desc.iProduct = s[USB_GADGET_PRODUCT_IDX].id; @@ -847,8 +849,10 @@ static int configfs_composite_bind(struct usb_gadget *gadget, } cfg->gstrings[i] = NULL; s = usb_gstrings_attach(&gi->cdev, cfg->gstrings, 1); - if (IS_ERR(s)) + if (IS_ERR(s)) { + ret = PTR_ERR(s); goto err_comp_cleanup; + } c->iConfiguration = s[0].id; } -- cgit v1.2.3 From 1bc0d926895bf86cf2b848c5d02cb422e275bbbb Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Tue, 14 May 2013 17:32:16 +0530 Subject: usb: dwc3: Fix compilation break when building with USB_DWC3_DUAL_ROLE=y The commit: 388e5c5 usb: dwc3: remove dwc3 dependency on host AND gadget breaks compilation when USB=y, USB_GADGET=m, USB_DWC3=y and USB_DWC3_DUAL_ROLE=y. drivers/built-in.o: In function `dwc3_gadget_giveback': drivers/usb/dwc3/gadget.c:271: undefined reference to `usb_gadget_unmap_request' drivers/built-in.o: In function `__dwc3_gadget_kick_transfer': drivers/usb/dwc3/gadget.c:1005: undefined reference to `usb_gadget_unmap_request' drivers/built-in.o: In function `__dwc3_gadget_ep_queue': drivers/usb/dwc3/gadget.c:1073: undefined reference to `usb_gadget_map_request' drivers/built-in.o: In function `dwc3_gadget_reset_interrupt': drivers/usb/dwc3/gadget.c:2165: undefined reference to `usb_gadget_set_state' drivers/built-in.o: In function `dwc3_gadget_init': drivers/usb/dwc3/gadget.c:2647: undefined reference to `usb_add_gadget_udc' drivers/built-in.o: In function `dwc3_gadget_exit': drivers/usb/dwc3/gadget.c:2681: undefined reference to `usb_del_gadget_udc' drivers/built-in.o: In function `__dwc3_ep0_do_control_data': drivers/usb/dwc3/ep0.c:929: undefined reference to `usb_gadget_map_request' drivers/usb/dwc3/ep0.c:906: undefined reference to `usb_gadget_map_request' drivers/built-in.o: In function `dwc3_ep0_set_config': drivers/usb/dwc3/ep0.c:575: undefined reference to `usb_gadget_set_state' drivers/built-in.o: In function `dwc3_ep0_set_address': drivers/usb/dwc3/ep0.c:520: undefined reference to `usb_gadget_set_state' drivers/usb/dwc3/ep0.c:522: undefined reference to `usb_gadget_set_state' drivers/built-in.o: In function `dwc3_ep0_set_config': drivers/usb/dwc3/ep0.c:556: undefined reference to `usb_gadget_set_state' Making changes similar to patch: 71a5e61 usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module Let us limit the DWC3 mode to depend on corresponding usb-subsystem and USB_DWC3. Signed-off-by: Vivek Gautam Cc: Felipe Balbi Cc: Fengguang Wu Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index ea5ee9c21c35..757aa18027d0 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -19,21 +19,21 @@ choice config USB_DWC3_HOST bool "Host only mode" - depends on USB + depends on USB=y || USB=USB_DWC3 help Select this when you want to use DWC3 in host mode only, thereby the gadget feature will be regressed. config USB_DWC3_GADGET bool "Gadget only mode" - depends on USB_GADGET + depends on USB_GADGET=y || USB_GADGET=USB_DWC3 help Select this when you want to use DWC3 in gadget mode only, thereby the host feature will be regressed. config USB_DWC3_DUAL_ROLE bool "Dual Role mode" - depends on (USB && USB_GADGET) + depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3)) help This is the default mode of working of DWC3 controller where both host and gadget features are enabled. -- cgit v1.2.3 From a5e9cd952e2ee215286ea3ec5e6b3aa669e04e0e Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 8 May 2013 15:16:23 -0400 Subject: xen/tmem: Cleanup. Remove the parts that say temporary. Frontswap is upstream, no need to having this #ifdef. Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/tmem.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index e3600be4e7fa..5686d6d1a4b5 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -11,11 +11,7 @@ #include #include #include - -/* temporary ifdef until include/linux/frontswap.h is upstream */ -#ifdef CONFIG_FRONTSWAP #include -#endif #include #include -- cgit v1.2.3 From 0cb401d44e1152658c99c8566de915c2d71eab9e Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 8 May 2013 15:50:59 -0400 Subject: xen/tmem: Move all of the boot and module parameters to the top of the file. Just code movement to see the different boot or module parameters. Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/tmem.c | 85 +++++++++++++++++++++++++++++------------------------- 1 file changed, 45 insertions(+), 40 deletions(-) diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index 5686d6d1a4b5..edf7e18a1c05 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -20,6 +20,51 @@ #include #include +#ifndef CONFIG_XEN_TMEM_MODULE +bool __read_mostly tmem_enabled = false; + +static int __init enable_tmem(char *s) +{ + tmem_enabled = true; + return 1; +} +__setup("tmem", enable_tmem); +#endif + +#ifdef CONFIG_CLEANCACHE +static bool disable_cleancache __read_mostly; +static bool disable_selfballooning __read_mostly; +#ifdef CONFIG_XEN_TMEM_MODULE +module_param(disable_cleancache, bool, S_IRUGO); +module_param(disable_selfballooning, bool, S_IRUGO); +#else +static int __init no_cleancache(char *s) +{ + disable_cleancache = true; + return 1; +} +__setup("nocleancache", no_cleancache); +#endif +#endif /* CONFIG_CLEANCACHE */ + +#ifdef CONFIG_FRONTSWAP +static bool disable_frontswap __read_mostly; +static bool disable_frontswap_selfshrinking __read_mostly; +#ifdef CONFIG_XEN_TMEM_MODULE +module_param(disable_frontswap, bool, S_IRUGO); +module_param(disable_frontswap_selfshrinking, bool, S_IRUGO); +#else +static int __init no_frontswap(char *s) +{ + disable_frontswap = true; + return 1; +} +__setup("nofrontswap", no_frontswap); +#endif +#else /* CONFIG_FRONTSWAP */ +#define disable_frontswap_selfshrinking 1 +#endif /* CONFIG_FRONTSWAP */ + #define TMEM_CONTROL 0 #define TMEM_NEW_POOL 1 #define TMEM_DESTROY_POOL 2 @@ -125,16 +170,6 @@ static int xen_tmem_flush_object(u32 pool_id, struct tmem_oid oid) return xen_tmem_op(TMEM_FLUSH_OBJECT, pool_id, oid, 0, 0, 0, 0, 0); } -#ifndef CONFIG_XEN_TMEM_MODULE -bool __read_mostly tmem_enabled = false; - -static int __init enable_tmem(char *s) -{ - tmem_enabled = true; - return 1; -} -__setup("tmem", enable_tmem); -#endif #ifdef CONFIG_CLEANCACHE static int xen_tmem_destroy_pool(u32 pool_id) @@ -226,20 +261,6 @@ static int tmem_cleancache_init_shared_fs(char *uuid, size_t pagesize) return xen_tmem_new_pool(shared_uuid, TMEM_POOL_SHARED, pagesize); } -static bool disable_cleancache __read_mostly; -static bool disable_selfballooning __read_mostly; -#ifdef CONFIG_XEN_TMEM_MODULE -module_param(disable_cleancache, bool, S_IRUGO); -module_param(disable_selfballooning, bool, S_IRUGO); -#else -static int __init no_cleancache(char *s) -{ - disable_cleancache = true; - return 1; -} -__setup("nocleancache", no_cleancache); -#endif - static struct cleancache_ops tmem_cleancache_ops = { .put_page = tmem_cleancache_put_page, .get_page = tmem_cleancache_get_page, @@ -357,20 +378,6 @@ static void tmem_frontswap_init(unsigned ignored) xen_tmem_new_pool(private, TMEM_POOL_PERSIST, PAGE_SIZE); } -static bool disable_frontswap __read_mostly; -static bool disable_frontswap_selfshrinking __read_mostly; -#ifdef CONFIG_XEN_TMEM_MODULE -module_param(disable_frontswap, bool, S_IRUGO); -module_param(disable_frontswap_selfshrinking, bool, S_IRUGO); -#else -static int __init no_frontswap(char *s) -{ - disable_frontswap = true; - return 1; -} -__setup("nofrontswap", no_frontswap); -#endif - static struct frontswap_ops tmem_frontswap_ops = { .store = tmem_frontswap_store, .load = tmem_frontswap_load, @@ -378,8 +385,6 @@ static struct frontswap_ops tmem_frontswap_ops = { .invalidate_area = tmem_frontswap_flush_area, .init = tmem_frontswap_init }; -#else /* CONFIG_FRONTSWAP */ -#define disable_frontswap_selfshrinking 1 #endif static int xen_tmem_init(void) -- cgit v1.2.3 From e8f9cb034b1cb633ff920ec65381a2e7ac1d76f2 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 8 May 2013 15:58:06 -0400 Subject: xen/tmem: Split out the different module/boot options. There are three options - depending on what combination of CONFIG_FRONTSWAP, CONFIG_CLEANCACHE and CONFIG_XEN_SELFBALLOONING is used. Lets split them out nicely out in three groups to make it easier to clean up. Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/tmem.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index edf7e18a1c05..c2ee1887806a 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -49,10 +49,8 @@ __setup("nocleancache", no_cleancache); #ifdef CONFIG_FRONTSWAP static bool disable_frontswap __read_mostly; -static bool disable_frontswap_selfshrinking __read_mostly; #ifdef CONFIG_XEN_TMEM_MODULE module_param(disable_frontswap, bool, S_IRUGO); -module_param(disable_frontswap_selfshrinking, bool, S_IRUGO); #else static int __init no_frontswap(char *s) { @@ -61,8 +59,15 @@ static int __init no_frontswap(char *s) } __setup("nofrontswap", no_frontswap); #endif -#else /* CONFIG_FRONTSWAP */ +#endif /* CONFIG_FRONTSWAP */ + +#ifdef CONFIG_FRONTSWAP +static bool disable_frontswap_selfshrinking __read_mostly; +#ifdef CONFIG_XEN_TMEM_MODULE +module_param(disable_frontswap_selfshrinking, bool, S_IRUGO); +#else #define disable_frontswap_selfshrinking 1 +#endif #endif /* CONFIG_FRONTSWAP */ #define TMEM_CONTROL 0 -- cgit v1.2.3 From 23972c639980ba796a05ae9432df8267175b99ae Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 8 May 2013 16:57:35 -0400 Subject: xen/tmem: Fix compile warning. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We keep on getting: drivers/xen/tmem.c:65:13: warning: ‘disable_frontswap_selfshrinking’ defined but not used [-Wunused-variable] if CONFIG_FRONTSWAP=y and # CONFIG_CLEANCACHE is not set Found by 0 day test project Reported-by: Fengguang Wu Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/tmem.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index c2ee1887806a..30bf97475e13 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -61,14 +61,12 @@ __setup("nofrontswap", no_frontswap); #endif #endif /* CONFIG_FRONTSWAP */ -#ifdef CONFIG_FRONTSWAP +#ifdef CONFIG_XEN_SELFBALLOONING static bool disable_frontswap_selfshrinking __read_mostly; #ifdef CONFIG_XEN_TMEM_MODULE module_param(disable_frontswap_selfshrinking, bool, S_IRUGO); -#else -#define disable_frontswap_selfshrinking 1 #endif -#endif /* CONFIG_FRONTSWAP */ +#endif /* CONFIG_XEN_SELFBALLOONING */ #define TMEM_CONTROL 0 #define TMEM_NEW_POOL 1 -- cgit v1.2.3 From 9fd19653faceef210f30901f7cee0ceb13c6f39a Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 8 May 2013 17:10:08 -0400 Subject: xen/tmem: s/disable_// and change the logic. The variety of disable_[cleancache|frontswap|selfshrinking] are making this a bit complex. Just remove the "disable_" part and change the logic around for the "nofrontswap" and "nocleancache" parameters. Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/tmem.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index 30bf97475e13..411c7e3df46c 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -32,15 +32,15 @@ __setup("tmem", enable_tmem); #endif #ifdef CONFIG_CLEANCACHE -static bool disable_cleancache __read_mostly; -static bool disable_selfballooning __read_mostly; +static bool cleancache __read_mostly = true; +static bool selfballooning __read_mostly = true; #ifdef CONFIG_XEN_TMEM_MODULE -module_param(disable_cleancache, bool, S_IRUGO); -module_param(disable_selfballooning, bool, S_IRUGO); +module_param(cleancache, bool, S_IRUGO); +module_param(selfballooning, bool, S_IRUGO); #else static int __init no_cleancache(char *s) { - disable_cleancache = true; + cleancache = false; return 1; } __setup("nocleancache", no_cleancache); @@ -48,13 +48,13 @@ __setup("nocleancache", no_cleancache); #endif /* CONFIG_CLEANCACHE */ #ifdef CONFIG_FRONTSWAP -static bool disable_frontswap __read_mostly; +static bool frontswap __read_mostly = true; #ifdef CONFIG_XEN_TMEM_MODULE -module_param(disable_frontswap, bool, S_IRUGO); +module_param(frontswap, bool, S_IRUGO); #else static int __init no_frontswap(char *s) { - disable_frontswap = true; + frontswap = false; return 1; } __setup("nofrontswap", no_frontswap); @@ -62,9 +62,9 @@ __setup("nofrontswap", no_frontswap); #endif /* CONFIG_FRONTSWAP */ #ifdef CONFIG_XEN_SELFBALLOONING -static bool disable_frontswap_selfshrinking __read_mostly; +static bool frontswap_selfshrinking __read_mostly = true; #ifdef CONFIG_XEN_TMEM_MODULE -module_param(disable_frontswap_selfshrinking, bool, S_IRUGO); +module_param(frontswap_selfshrinking, bool, S_IRUGO); #endif #endif /* CONFIG_XEN_SELFBALLOONING */ @@ -395,7 +395,7 @@ static int xen_tmem_init(void) if (!xen_domain()) return 0; #ifdef CONFIG_FRONTSWAP - if (tmem_enabled && !disable_frontswap) { + if (tmem_enabled && frontswap) { char *s = ""; struct frontswap_ops *old_ops = frontswap_register_ops(&tmem_frontswap_ops); @@ -412,7 +412,7 @@ static int xen_tmem_init(void) #endif #ifdef CONFIG_CLEANCACHE BUG_ON(sizeof(struct cleancache_filekey) != sizeof(struct tmem_oid)); - if (tmem_enabled && !disable_cleancache) { + if (tmem_enabled && cleancache) { char *s = ""; struct cleancache_ops *old_ops = cleancache_register_ops(&tmem_cleancache_ops); @@ -423,8 +423,7 @@ static int xen_tmem_init(void) } #endif #ifdef CONFIG_XEN_SELFBALLOONING - xen_selfballoon_init(!disable_selfballooning, - !disable_frontswap_selfshrinking); + xen_selfballoon_init(selfballooning, frontswap_selfshrinking); #endif return 0; } -- cgit v1.2.3 From 2ca62b044457e3aacaa06684974b0ff40b2f5a94 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 8 May 2013 17:12:44 -0400 Subject: xen/tmem: Remove the boot options and fold them in the tmem.X parameters. If tmem is built-in or a module, the user has the option on the command line to influence it by doing: tmem. instead of having a variety of "nocleancache", and "nofrontswap". The others: "noselfballooning" and "selfballooning"; and "noselfshrink" are in a different driver xen-selfballoon.c and the patches: xen/tmem: Remove the usage of 'noselfshrink' and use 'tmem.selfshrink' bool instead. xen/tmem: Remove the usage of 'noselfballoon','selfballoon' and use 'tmem.selfballon' bool instead. remove them. Also add documentation. Signed-off-by: Konrad Rzeszutek Wilk --- Documentation/kernel-parameters.txt | 20 ++++++++++++++++++++ drivers/xen/tmem.c | 28 ++++------------------------ 2 files changed, 24 insertions(+), 24 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c3bfacb92910..3de01edca3ea 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3005,6 +3005,26 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Force threading of all interrupt handlers except those marked explicitly IRQF_NO_THREAD. + tmem [KNL,XEN] + Enable the Transcendent memory driver if built-in. + + tmem.cleancache=0|1 [KNL, XEN] + Default is on (1). Disable the usage of the cleancache + API to send anonymous pages to the hypervisor. + + tmem.frontswap=0|1 [KNL, XEN] + Default is on (1). Disable the usage of the frontswap + API to send swap pages to the hypervisor. + + tmem.selfballooning=0|1 [KNL, XEN] + Default is on (1). Disable the driving of swap pages + to the hypervisor. + + tmem.selfshrinking=0|1 [KNL, XEN] + Default is on (1). Partial swapoff that immediately + transfers pages from Xen hypervisor back to the + kernel based on different criteria. + topology= [S390] Format: {off | on} Specify if the kernel should make use of the cpu diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index 411c7e3df46c..c1df0ff89878 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -33,39 +33,19 @@ __setup("tmem", enable_tmem); #ifdef CONFIG_CLEANCACHE static bool cleancache __read_mostly = true; -static bool selfballooning __read_mostly = true; -#ifdef CONFIG_XEN_TMEM_MODULE module_param(cleancache, bool, S_IRUGO); +static bool selfballooning __read_mostly = true; module_param(selfballooning, bool, S_IRUGO); -#else -static int __init no_cleancache(char *s) -{ - cleancache = false; - return 1; -} -__setup("nocleancache", no_cleancache); -#endif #endif /* CONFIG_CLEANCACHE */ #ifdef CONFIG_FRONTSWAP static bool frontswap __read_mostly = true; -#ifdef CONFIG_XEN_TMEM_MODULE module_param(frontswap, bool, S_IRUGO); -#else -static int __init no_frontswap(char *s) -{ - frontswap = false; - return 1; -} -__setup("nofrontswap", no_frontswap); -#endif #endif /* CONFIG_FRONTSWAP */ #ifdef CONFIG_XEN_SELFBALLOONING -static bool frontswap_selfshrinking __read_mostly = true; -#ifdef CONFIG_XEN_TMEM_MODULE -module_param(frontswap_selfshrinking, bool, S_IRUGO); -#endif +static bool selfshrinking __read_mostly = true; +module_param(selfshrinking, bool, S_IRUGO); #endif /* CONFIG_XEN_SELFBALLOONING */ #define TMEM_CONTROL 0 @@ -423,7 +403,7 @@ static int xen_tmem_init(void) } #endif #ifdef CONFIG_XEN_SELFBALLOONING - xen_selfballoon_init(selfballooning, frontswap_selfshrinking); + xen_selfballoon_init(selfballooning, selfshrinking); #endif return 0; } -- cgit v1.2.3 From 54598d1b034624dc0817fca3f2c7fd914938b7c8 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 8 May 2013 16:44:06 -0400 Subject: xen/tmem: Remove the usage of 'noselfshrink' and use 'tmem.selfshrink' bool instead. As the 'tmem' driver is the one that actually sets whether it will use it or not so might as well make tmem responsible for this knob. Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/Kconfig | 2 +- drivers/xen/xen-selfballoon.c | 15 ++------------- 2 files changed, 3 insertions(+), 14 deletions(-) diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index f03bf501527f..98e9744e3359 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -22,7 +22,7 @@ config XEN_SELFBALLOONING ballooning is disabled by default but can be enabled with the 'selfballooning' kernel boot parameter. If FRONTSWAP is configured, frontswap-selfshrinking is enabled by default but can be disabled - with the 'noselfshrink' kernel boot parameter; and self-ballooning + with the 'tmem.selfshrink=0' kernel boot parameter; and self-ballooning is enabled by default but can be disabled with the 'noselfballooning' kernel boot parameter. Note that systems without a sufficiently large swap device should not enable self-ballooning. diff --git a/drivers/xen/xen-selfballoon.c b/drivers/xen/xen-selfballoon.c index f2ef569c7cc1..012f9d9bf5f4 100644 --- a/drivers/xen/xen-selfballoon.c +++ b/drivers/xen/xen-selfballoon.c @@ -60,8 +60,8 @@ * be enabled with the "selfballooning" kernel boot option; similarly * selfballooning is enabled by default if frontswap is configured and * can be disabled with the "noselfballooning" kernel boot option. Finally, - * when frontswap is configured, frontswap-selfshrinking can be disabled - * with the "noselfshrink" kernel boot option. + * when frontswap is configured,frontswap-selfshrinking can be disabled + * with the "tmem.selfshrink=0" kernel boot option. * * Selfballooning is disallowed in domain0 and force-disabled. * @@ -120,9 +120,6 @@ static DECLARE_DELAYED_WORK(selfballoon_worker, selfballoon_process); /* Enable/disable with sysfs. */ static bool frontswap_selfshrinking __read_mostly; -/* Enable/disable with kernel boot option. */ -static bool use_frontswap_selfshrink = true; - /* * The default values for the following parameters were deemed reasonable * by experimentation, may be workload-dependent, and can all be @@ -176,14 +173,6 @@ static void frontswap_selfshrink(void) frontswap_shrink(tgt_frontswap_pages); } -static int __init xen_nofrontswap_selfshrink_setup(char *s) -{ - use_frontswap_selfshrink = false; - return 1; -} - -__setup("noselfshrink", xen_nofrontswap_selfshrink_setup); - /* Disable with kernel boot option. */ static bool use_selfballooning = true; -- cgit v1.2.3 From ed4f346a008edda8ee08ffcdc642691847636954 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 8 May 2013 16:52:38 -0400 Subject: xen/tmem: Remove the usage of '[no|]selfballoon' and use 'tmem.selfballooning' bool instead. As the 'tmem' driver is the one that actually sets whether it will use it (or not) so might as well make tmem responsible for this knob. Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/Kconfig | 5 ++--- drivers/xen/xen-selfballoon.c | 25 ++----------------------- 2 files changed, 4 insertions(+), 26 deletions(-) diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index 98e9744e3359..9e02d60a364b 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -19,11 +19,10 @@ config XEN_SELFBALLOONING by the current usage of anonymous memory ("committed AS") and controlled by various sysfs-settable parameters. Configuring FRONTSWAP is highly recommended; if it is not configured, self- - ballooning is disabled by default but can be enabled with the - 'selfballooning' kernel boot parameter. If FRONTSWAP is configured, + ballooning is disabled by default. If FRONTSWAP is configured, frontswap-selfshrinking is enabled by default but can be disabled with the 'tmem.selfshrink=0' kernel boot parameter; and self-ballooning - is enabled by default but can be disabled with the 'noselfballooning' + is enabled by default but can be disabled with the 'tmem.selfballooning=0' kernel boot parameter. Note that systems without a sufficiently large swap device should not enable self-ballooning. diff --git a/drivers/xen/xen-selfballoon.c b/drivers/xen/xen-selfballoon.c index 012f9d9bf5f4..5d637e2b1b9f 100644 --- a/drivers/xen/xen-selfballoon.c +++ b/drivers/xen/xen-selfballoon.c @@ -57,9 +57,9 @@ * configured, it is highly recommended that frontswap also be configured * and enabled when selfballooning is running. So, selfballooning * is disabled by default if frontswap is not configured and can only - * be enabled with the "selfballooning" kernel boot option; similarly + * be enabled with the "tmem.selfballooning=1" kernel boot option; similarly * selfballooning is enabled by default if frontswap is configured and - * can be disabled with the "noselfballooning" kernel boot option. Finally, + * can be disabled with the "tmem.selfballooning=0" kernel boot option. Finally, * when frontswap is configured,frontswap-selfshrinking can be disabled * with the "tmem.selfshrink=0" kernel boot option. * @@ -173,27 +173,6 @@ static void frontswap_selfshrink(void) frontswap_shrink(tgt_frontswap_pages); } -/* Disable with kernel boot option. */ -static bool use_selfballooning = true; - -static int __init xen_noselfballooning_setup(char *s) -{ - use_selfballooning = false; - return 1; -} - -__setup("noselfballooning", xen_noselfballooning_setup); -#else /* !CONFIG_FRONTSWAP */ -/* Enable with kernel boot option. */ -static bool use_selfballooning; - -static int __init xen_selfballooning_setup(char *s) -{ - use_selfballooning = true; - return 1; -} - -__setup("selfballooning", xen_selfballooning_setup); #endif /* CONFIG_FRONTSWAP */ #define MB2PAGES(mb) ((mb) << (20 - PAGE_SHIFT)) -- cgit v1.2.3 From 37d46e152e4c71cd772085912f1c7bf06839f739 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Tue, 14 May 2013 13:56:42 -0400 Subject: xen/tmem: Don't use self[ballooning|shrinking] if frontswap is off. There is no point. We would just squeeze the guest to put more and more pages in the swap disk without any purpose. The only time it makes sense to use the selfballooning and shrinking is when frontswap is being utilized. Signed-off-by: Konrad Rzeszutek Wilk --- Documentation/kernel-parameters.txt | 3 ++- drivers/xen/tmem.c | 8 ++++++++ drivers/xen/xen-selfballoon.c | 15 ++++++--------- 3 files changed, 16 insertions(+), 10 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 3de01edca3ea..6e3b18a8afc6 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3014,7 +3014,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. tmem.frontswap=0|1 [KNL, XEN] Default is on (1). Disable the usage of the frontswap - API to send swap pages to the hypervisor. + API to send swap pages to the hypervisor. If disabled + the selfballooning and selfshrinking are force disabled. tmem.selfballooning=0|1 [KNL, XEN] Default is on (1). Disable the driving of swap pages diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index c1df0ff89878..18e8bd8fa947 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -403,6 +403,14 @@ static int xen_tmem_init(void) } #endif #ifdef CONFIG_XEN_SELFBALLOONING + /* + * There is no point of driving pages to the swap system if they + * aren't going anywhere in tmem universe. + */ + if (!frontswap) { + selfshrinking = false; + selfballooning = false; + } xen_selfballoon_init(selfballooning, selfshrinking); #endif return 0; diff --git a/drivers/xen/xen-selfballoon.c b/drivers/xen/xen-selfballoon.c index 5d637e2b1b9f..f70984a892aa 100644 --- a/drivers/xen/xen-selfballoon.c +++ b/drivers/xen/xen-selfballoon.c @@ -53,15 +53,12 @@ * System configuration note: Selfballooning should not be enabled on * systems without a sufficiently large swap device configured; for best * results, it is recommended that total swap be increased by the size - * of the guest memory. Also, while technically not required to be - * configured, it is highly recommended that frontswap also be configured - * and enabled when selfballooning is running. So, selfballooning - * is disabled by default if frontswap is not configured and can only - * be enabled with the "tmem.selfballooning=1" kernel boot option; similarly - * selfballooning is enabled by default if frontswap is configured and - * can be disabled with the "tmem.selfballooning=0" kernel boot option. Finally, - * when frontswap is configured,frontswap-selfshrinking can be disabled - * with the "tmem.selfshrink=0" kernel boot option. + * of the guest memory. Note, that selfballooning should be disabled by default + * if frontswap is not configured. Similarly selfballooning should be enabled + * by default if frontswap is configured and can be disabled with the + * "tmem.selfballooning=0" kernel boot option. Finally, when frontswap is + * configured, frontswap-selfshrinking can be disabled with the + * "tmem.selfshrink=0" kernel boot option. * * Selfballooning is disallowed in domain0 and force-disabled. * -- cgit v1.2.3 From 2cde3935cf0e51ce5fd07609f1b770664db2d96b Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 10 May 2013 10:17:14 +0200 Subject: usb: gadget: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Acked-by: Greg Kroah-Hartman Signed-off-by: Wolfram Sang Signed-off-by: Felipe Balbi --- drivers/usb/gadget/bcm63xx_udc.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c index 9780c5708da8..fd24cb4540a4 100644 --- a/drivers/usb/gadget/bcm63xx_udc.c +++ b/drivers/usb/gadget/bcm63xx_udc.c @@ -2334,21 +2334,11 @@ static int bcm63xx_udc_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "error finding USBD resource\n"); - return -ENXIO; - } - udc->usbd_regs = devm_ioremap_resource(dev, res); if (IS_ERR(udc->usbd_regs)) return PTR_ERR(udc->usbd_regs); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(dev, "error finding IUDMA resource\n"); - return -ENXIO; - } - udc->iudma_regs = devm_ioremap_resource(dev, res); if (IS_ERR(udc->iudma_regs)) return PTR_ERR(udc->iudma_regs); -- cgit v1.2.3 From 9d6ab420a9cb475fb99874f06d00df9c8259c973 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 10 May 2013 10:17:16 +0200 Subject: usb: phy: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Acked-by: Greg Kroah-Hartman Signed-off-by: Wolfram Sang Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-mv-u3d-usb.c | 5 ----- drivers/usb/phy/phy-mxs-usb.c | 5 ----- drivers/usb/phy/phy-samsung-usb2.c | 5 ----- drivers/usb/phy/phy-samsung-usb3.c | 5 ----- 4 files changed, 20 deletions(-) diff --git a/drivers/usb/phy/phy-mv-u3d-usb.c b/drivers/usb/phy/phy-mv-u3d-usb.c index f7838a43347c..1568ea63e338 100644 --- a/drivers/usb/phy/phy-mv-u3d-usb.c +++ b/drivers/usb/phy/phy-mv-u3d-usb.c @@ -278,11 +278,6 @@ static int mv_u3d_phy_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "missing mem resource\n"); - return -ENODEV; - } - phy_base = devm_ioremap_resource(dev, res); if (IS_ERR(phy_base)) return PTR_ERR(phy_base); diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 3b642778cdff..763250b3c4fb 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -130,11 +130,6 @@ static int mxs_phy_probe(struct platform_device *pdev) int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "can't get device resources\n"); - return -ENOENT; - } - base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) return PTR_ERR(base); diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c index 45ffe036dacc..9d5e273abcc7 100644 --- a/drivers/usb/phy/phy-samsung-usb2.c +++ b/drivers/usb/phy/phy-samsung-usb2.c @@ -363,11 +363,6 @@ static int samsung_usb2phy_probe(struct platform_device *pdev) int ret; phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!phy_mem) { - dev_err(dev, "%s: missing mem resource\n", __func__); - return -ENODEV; - } - phy_base = devm_ioremap_resource(dev, phy_mem); if (IS_ERR(phy_base)) return PTR_ERR(phy_base); diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c index 133f3d0c554f..5a9efcbcb532 100644 --- a/drivers/usb/phy/phy-samsung-usb3.c +++ b/drivers/usb/phy/phy-samsung-usb3.c @@ -239,11 +239,6 @@ static int samsung_usb3phy_probe(struct platform_device *pdev) int ret; phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!phy_mem) { - dev_err(dev, "%s: missing mem resource\n", __func__); - return -ENODEV; - } - phy_base = devm_ioremap_resource(dev, phy_mem); if (IS_ERR(phy_base)) return PTR_ERR(phy_base); -- cgit v1.2.3 From 1abd8b3172b701ed626df4ebf09b7fe7f329888a Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Fri, 10 May 2013 15:15:08 +0530 Subject: usb: phy: Fix NULL pointer exception during usb_get_phy Upon initialisation (driver probe) a NULL pointer exception is triggered. This is due to lack of initialisation of device field in phy structure, which is used by phy framework in usb_get_phy(). Fix it by initialising the device field. Signed-off-by: Robert Jarzmik Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-fsl-usb.c | 1 + drivers/usb/phy/phy-gpio-vbus-usb.c | 1 + drivers/usb/phy/phy-isp1301.c | 1 + 3 files changed, 3 insertions(+) diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c index 97b9308507c3..e771bafb9f1d 100644 --- a/drivers/usb/phy/phy-fsl-usb.c +++ b/drivers/usb/phy/phy-fsl-usb.c @@ -799,6 +799,7 @@ static int fsl_otg_conf(struct platform_device *pdev) /* initialize the otg structure */ fsl_otg_tc->phy.label = DRIVER_DESC; + fsl_otg_tc->phy.dev = &pdev->dev; fsl_otg_tc->phy.set_power = fsl_otg_set_power; fsl_otg_tc->phy.otg->phy = &fsl_otg_tc->phy; diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c index 1d32af2ee403..8443335c2ea0 100644 --- a/drivers/usb/phy/phy-gpio-vbus-usb.c +++ b/drivers/usb/phy/phy-gpio-vbus-usb.c @@ -266,6 +266,7 @@ static int __init gpio_vbus_probe(struct platform_device *pdev) platform_set_drvdata(pdev, gpio_vbus); gpio_vbus->dev = &pdev->dev; gpio_vbus->phy.label = "gpio-vbus"; + gpio_vbus->phy.dev = gpio_vbus->dev; gpio_vbus->phy.set_power = gpio_vbus_set_power; gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend; gpio_vbus->phy.state = OTG_STATE_UNDEFINED; diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c index 225ae6c97eeb..8a55b37d1a02 100644 --- a/drivers/usb/phy/phy-isp1301.c +++ b/drivers/usb/phy/phy-isp1301.c @@ -102,6 +102,7 @@ static int isp1301_probe(struct i2c_client *client, mutex_init(&isp->mutex); phy = &isp->phy; + phy->dev = &client->dev; phy->label = DRV_NAME; phy->init = isp1301_phy_init; phy->set_vbus = isp1301_phy_set_vbus; -- cgit v1.2.3 From 17d966a325a7ccfb5970839fb5b2ebb9e3909a6f Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Sat, 11 May 2013 21:14:00 +0900 Subject: usb: gadget: s3c-hsotg: pass 'struct usb_request *' to usb_gadget_unmap_request() 'struct usb_request *' should be passed to usb_gadget_unmap_request(), as the second argument; however, 'struct s3c_hsotg_req *' is used. Fixed build warnings as below: drivers/usb/gadget/s3c-hsotg.c: In function 's3c_hsotg_unmap_dma': drivers/usb/gadget/s3c-hsotg.c:440:2: warning: passing argument 2 of 'usb_gadget_unmap_request' from incompatible pointer type [enabled by default] include/linux/usb/gadget.h:961:13: note: expected 'struct usb_request *' but argument is of type 'struct s3c_hsotg_req *' drivers/usb/gadget/s3c-hsotg.c:434:22: warning: unused variable 'req' [-Wunused-variable] Signed-off-by: Jingoo Han Signed-off-by: Felipe Balbi --- drivers/usb/gadget/s3c-hsotg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index a3cdc32115d5..af22f24046b2 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -437,7 +437,7 @@ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg, if (hs_req->req.length == 0) return; - usb_gadget_unmap_request(&hsotg->gadget, hs_req, hs_ep->dir_in); + usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->dir_in); } /** -- cgit v1.2.3 From b990da15f4ffaed11adfb55c975b2c6b8f20f222 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 13 May 2013 10:43:26 +0200 Subject: usb: phy: remove CONFIG_USB_OTG_UTILS once more The Kconfig symbol USB_OTG_UTILS was removed in the v3.10 merge window, in commit fd89149875 ("usb: phy: remove CONFIG_USB_OTG_UTILS"). But that symbol popped up again in a few places. Remove it there too. Acked-by: Paul Zimmerman Signed-off-by: Paul Bolle Signed-off-by: Felipe Balbi --- drivers/staging/dwc2/Kconfig | 1 - drivers/usb/gadget/Kconfig | 1 - drivers/usb/phy/Kconfig | 1 - 3 files changed, 3 deletions(-) diff --git a/drivers/staging/dwc2/Kconfig b/drivers/staging/dwc2/Kconfig index f0b4739c65a1..bbee1775d49e 100644 --- a/drivers/staging/dwc2/Kconfig +++ b/drivers/staging/dwc2/Kconfig @@ -2,7 +2,6 @@ config USB_DWC2 tristate "DesignWare USB2 DRD Core Support" depends on USB depends on VIRT_TO_BUS - select USB_OTG_UTILS help Say Y or M here if your system has a Dual Role HighSpeed USB controller based on the DesignWare HSOTG IP Core. diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 83300d94a893..f41aa0d0c414 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -146,7 +146,6 @@ config USB_LPC32XX depends on ARCH_LPC32XX depends on USB_PHY select USB_ISP1301 - select USB_OTG_UTILS help This option selects the USB device controller in the LPC32xx SoC. diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 371d0e74e909..5053cea0ad89 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -139,7 +139,6 @@ config USB_ISP1301 tristate "NXP ISP1301 USB transceiver support" depends on USB || USB_GADGET depends on I2C - select USB_OTG_UTILS help Say Y here to add support for the NXP ISP1301 USB transceiver driver. This chip is typically used as USB transceiver for USB host, gadget -- cgit v1.2.3 From 4e0aa635d069478e73ad95ff21fd4ae144faa189 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Wed, 15 May 2013 15:03:14 +0200 Subject: usb: otg: mxs-phy: add missing type to usb_phy The mxs-phy is missing the phy.type property, why the usb_get_phy helper function won't be able to find it. This patch adds this missing property. Signed-off-by: Michael Grzeschik Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-mxs-usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 763250b3c4fb..bd601c537c8d 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -155,6 +155,7 @@ static int mxs_phy_probe(struct platform_device *pdev) mxs_phy->phy.set_suspend = mxs_phy_suspend; mxs_phy->phy.notify_connect = mxs_phy_on_connect; mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect; + mxs_phy->phy.type = USB_PHY_TYPE_USB2; ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier); -- cgit v1.2.3 From ba54229db65b161d46df449638a1a386444681b0 Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Wed, 15 May 2013 13:43:29 +0200 Subject: s390/cio: add channel ID sysfs attribute Add new attributes "chid" and "chid_external" to the channel-path sysfs directory. These attributes contain information related to the channel-ID of the channel-path. Reviewed-by: Sebastian Ott Signed-off-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/chp.c | 36 ++++++++++++++++++++++++++++++++++++ drivers/s390/cio/chsc.h | 4 +++- 2 files changed, 39 insertions(+), 1 deletion(-) diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c index 21fabc6d5a9c..6c440d4349d4 100644 --- a/drivers/s390/cio/chp.c +++ b/drivers/s390/cio/chp.c @@ -352,12 +352,48 @@ static ssize_t chp_shared_show(struct device *dev, static DEVICE_ATTR(shared, 0444, chp_shared_show, NULL); +static ssize_t chp_chid_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct channel_path *chp = to_channelpath(dev); + ssize_t rc; + + mutex_lock(&chp->lock); + if (chp->desc_fmt1.flags & 0x10) + rc = sprintf(buf, "%04x\n", chp->desc_fmt1.chid); + else + rc = 0; + mutex_unlock(&chp->lock); + + return rc; +} +static DEVICE_ATTR(chid, 0444, chp_chid_show, NULL); + +static ssize_t chp_chid_external_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct channel_path *chp = to_channelpath(dev); + ssize_t rc; + + mutex_lock(&chp->lock); + if (chp->desc_fmt1.flags & 0x10) + rc = sprintf(buf, "%x\n", chp->desc_fmt1.flags & 0x8 ? 1 : 0); + else + rc = 0; + mutex_unlock(&chp->lock); + + return rc; +} +static DEVICE_ATTR(chid_external, 0444, chp_chid_external_show, NULL); + static struct attribute *chp_attrs[] = { &dev_attr_status.attr, &dev_attr_configure.attr, &dev_attr_type.attr, &dev_attr_cmg.attr, &dev_attr_shared.attr, + &dev_attr_chid.attr, + &dev_attr_chid_external.attr, NULL, }; static struct attribute_group chp_attr_group = { diff --git a/drivers/s390/cio/chsc.h b/drivers/s390/cio/chsc.h index 349d5fc47196..e7ef2a683b8f 100644 --- a/drivers/s390/cio/chsc.h +++ b/drivers/s390/cio/chsc.h @@ -43,7 +43,9 @@ struct channel_path_desc_fmt1 { u8 chpid; u32:24; u8 chpp; - u32 unused[3]; + u32 unused[2]; + u16 chid; + u32:16; u16 mdc; u16:13; u8 r:1; -- cgit v1.2.3 From 615ee5443ff9bedd356dc6865f3e9c276ce434ea Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Tue, 26 Mar 2013 11:35:16 -0400 Subject: rcu: Don't allocate bootmem from rcu_init() When rcu_init() is called we already have slab working, allocating bootmem at that point results in warnings and an allocation from slab. This commit therefore changes alloc_bootmem_cpumask_var() to alloc_cpumask_var() in rcu_bootup_announce_oddness(), which is called from rcu_init(). Signed-off-by: Sasha Levin Signed-off-by: Paul E. McKenney Reviewed-by: Josh Triplett Tested-by: Robin Holt [paulmck: convert to zalloc_cpumask_var(), as suggested by Yinghai Lu.] --- kernel/rcutree_plugin.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index 6d939a645da1..3db5a375d8dd 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -88,7 +88,7 @@ static void __init rcu_bootup_announce_oddness(void) #ifdef CONFIG_RCU_NOCB_CPU #ifndef CONFIG_RCU_NOCB_CPU_NONE if (!have_rcu_nocb_mask) { - alloc_bootmem_cpumask_var(&rcu_nocb_mask); + zalloc_cpumask_var(&rcu_nocb_mask, GFP_KERNEL); have_rcu_nocb_mask = true; } #ifdef CONFIG_RCU_NOCB_CPU_ZERO -- cgit v1.2.3 From e4f47e3675e6f1f40906b785b934ce963e9f2eb3 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 8 May 2013 11:18:05 -0400 Subject: USB: xHCI: override bogus bulk wMaxPacketSize values MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch shortens the logic in xhci_endpoint_init() by moving common calculations involving max_packet and max_burst outside the switch statement, rather than repeating the same code in multiple case-specific statements. It also replaces two usages of max_packet which were clearly intended to be max_burst all along. More importantly, it compensates for a common bug in high-speed bulk endpoint descriptors. In many devices there is a bulk endpoint having a wMaxPacketSize value smaller than 512, which is forbidden by the USB spec. Some xHCI controllers can't handle this and refuse to accept the endpoint. This patch changes the max_packet value to 512, which allows the controller to use the endpoint properly. In practice the bogus maxpacket size doesn't matter, because none of the transfers sent via these endpoints are longer than the maxpacket value anyway. Signed-off-by: Alan Stern Reported-and-tested-by: "Aurélien Leblond" CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 965b539bc474..2cfc465925bd 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1423,15 +1423,17 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, ep_ctx->ep_info2 |= cpu_to_le32(xhci_get_endpoint_type(udev, ep)); /* Set the max packet size and max burst */ + max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)); + max_burst = 0; switch (udev->speed) { case USB_SPEED_SUPER: - max_packet = usb_endpoint_maxp(&ep->desc); - ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet)); /* dig out max burst from ep companion desc */ - max_packet = ep->ss_ep_comp.bMaxBurst; - ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet)); + max_burst = ep->ss_ep_comp.bMaxBurst; break; case USB_SPEED_HIGH: + /* Some devices get this wrong */ + if (usb_endpoint_xfer_bulk(&ep->desc)) + max_packet = 512; /* bits 11:12 specify the number of additional transaction * opportunities per microframe (USB 2.0, section 9.6.6) */ @@ -1439,17 +1441,16 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, usb_endpoint_xfer_int(&ep->desc)) { max_burst = (usb_endpoint_maxp(&ep->desc) & 0x1800) >> 11; - ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_burst)); } - /* Fall through */ + break; case USB_SPEED_FULL: case USB_SPEED_LOW: - max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)); - ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet)); break; default: BUG(); } + ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet) | + MAX_BURST(max_burst)); max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep); ep_ctx->tx_info = cpu_to_le32(MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload)); -- cgit v1.2.3 From ccd9509a0b942f7a139f1adb741a746ef0220911 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 14 May 2013 13:54:12 -0400 Subject: USB: fix Kconfig logic for USB_UHCI_HCD The Kconfig settings for uhci-hcd are too permissive; they allow the driver to be built without any bus-glue modules configured (USB_UHCI_HCD enabled, PCI disabled, SPARC_LEON disabled, ARCH_VT8500 enabled, and USB_UHCI_PLATFORM disabled). This patch fixes the problem by rearranging the dependencies. Now the platform-dependent config options don't depend on USB_UHCI_HCD; instead it depends on them. Furthermore, there is no user-selectable choice as to which glue modules will be built. If USB_UHCI_HCD is enabled then all applicable bus glues will be built. Signed-off-by: Alan Stern CC: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index de94f2699063..344d5e2f87d7 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -507,7 +507,7 @@ endif # USB_OHCI_HCD config USB_UHCI_HCD tristate "UHCI HCD (most Intel and VIA) support" - depends on PCI || SPARC_LEON || ARCH_VT8500 + depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC ---help--- The Universal Host Controller Interface is a standard by Intel for accessing the USB hardware in the PC (which is also called the USB @@ -524,26 +524,19 @@ config USB_UHCI_HCD config USB_UHCI_SUPPORT_NON_PCI_HC bool - depends on USB_UHCI_HCD - default y if (SPARC_LEON || ARCH_VT8500) + default y if (SPARC_LEON || USB_UHCI_PLATFORM) config USB_UHCI_PLATFORM - bool "Generic UHCI Platform Driver support" - depends on USB_UHCI_SUPPORT_NON_PCI_HC + bool default y if ARCH_VT8500 - ---help--- - Enable support for generic UHCI platform devices that require no - additional configuration. config USB_UHCI_BIG_ENDIAN_MMIO bool - depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON - default y + default y if SPARC_LEON config USB_UHCI_BIG_ENDIAN_DESC bool - depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON - default y + default y if SPARC_LEON config USB_FHCI_HCD tristate "Freescale QE USB Host Controller support" -- cgit v1.2.3 From 997ff893603c6455da4c5e26ba1d0f81adfecdfc Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 14 May 2013 13:55:29 -0400 Subject: USB: UHCI: fix for suspend of virtual HP controller HP's virtual UHCI host controller takes a long time to suspend (several hundred microseconds), even when no devices are attached. This provokes a warning message from uhci-hcd in the auto-stop case. To prevent this from happening, this patch adds a test to avoid performing an auto-stop when the wait_for_hp quirk flag is set. The controller will still suspend through the normal runtime PM mechanism. And since that pathway includes a 1-ms delay, the slowness of the virtual hardware won't matter. Signed-off-by: Alan Stern Reported-and-tested-by: ZhenHua CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-hub.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index f87bee6d2789..9189bc984c98 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -225,7 +225,8 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf) /* auto-stop if nothing connected for 1 second */ if (any_ports_active(uhci)) uhci->rh_state = UHCI_RH_RUNNING; - else if (time_after_eq(jiffies, uhci->auto_stop_time)) + else if (time_after_eq(jiffies, uhci->auto_stop_time) && + !uhci->wait_for_hp) suspend_rh(uhci, UHCI_RH_AUTO_STOPPED); break; -- cgit v1.2.3 From e1944017839d7dfbf7329fac4bdec8b4050edf5e Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 14 May 2013 13:57:19 -0400 Subject: USB: fix latency in uhci-hcd and ohci-hcd Commits c44b225077bb1fb25ed5cd5c4f226897b91bedd4 (UHCI: implement new semantics for URB_ISO_ASAP) and 6a41b4d3fe8cd4cc95181516fc6fba7b1747a27c (OHCI: implement new semantics for URB_ISO_ASAP) increased the latency for isochronous URBs in uhci-hcd and ohci-hcd respectively to 2 milliseconds, in an attempt to avoid underruns. It turns out that not only was this unnecessary -- 1-ms latency works okay -- it also causes problems with certain application loads such as real-time audio. This patch changes the latency for both drivers back to 1 ms. This should be applied to -stable kernels going back to 3.8. Signed-off-by: Alan Stern Reported-and-tested-by: Joe Rayhawk CC: Clemens Ladisch CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/uhci-q.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 9e6de9586ae4..df1af0bcfe99 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -233,7 +233,7 @@ static int ohci_urb_enqueue ( urb->start_frame = frame; } } else if (ed->type == PIPE_ISOCHRONOUS) { - u16 next = ohci_frame_no(ohci) + 2; + u16 next = ohci_frame_no(ohci) + 1; u16 frame = ed->last_iso + ed->interval; /* Behind the scheduling threshold? */ diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index f0976d8190bc..041c6ddb695c 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -1287,7 +1287,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, return -EINVAL; /* Can't change the period */ } else { - next = uhci->frame_number + 2; + next = uhci->frame_number + 1; /* Find the next unused frame */ if (list_empty(&qh->queue)) { -- cgit v1.2.3 From 815fa7b917614261748d1ecd9600ff27f99508e5 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 14 May 2013 13:57:51 -0400 Subject: USB: OHCI: fix logic for scheduling isochronous URBs The isochronous scheduling logic in ohci-hcd has a bug. The calculation for skipping TDs that are too late should be carried out only in the !URB_ISO_ASAP case. When URB_ISO_ASAP is set, the URB is pushed back so that none of the TDs are too late, which would cause the calculation to overflow. The patch also fixes the calculation to avoid overflow in the case where the frame value wraps around. This should be applied to -stable kernels going back to 3.8. Signed-off-by: Alan Stern CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hcd.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index df1af0bcfe99..fc627fd54116 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -240,7 +240,7 @@ static int ohci_urb_enqueue ( if (unlikely(tick_before(frame, next))) { /* USB_ISO_ASAP: Round up to the first available slot */ - if (urb->transfer_flags & URB_ISO_ASAP) + if (urb->transfer_flags & URB_ISO_ASAP) { frame += (next - frame + ed->interval - 1) & -ed->interval; @@ -248,21 +248,25 @@ static int ohci_urb_enqueue ( * Not ASAP: Use the next slot in the stream. If * the entire URB falls before the threshold, fail. */ - else if (tick_before(frame + ed->interval * + } else { + if (tick_before(frame + ed->interval * (urb->number_of_packets - 1), next)) { - retval = -EXDEV; - usb_hcd_unlink_urb_from_ep(hcd, urb); - goto fail; - } + retval = -EXDEV; + usb_hcd_unlink_urb_from_ep(hcd, urb); + goto fail; + } - /* - * Some OHCI hardware doesn't handle late TDs - * correctly. After retiring them it proceeds to - * the next ED instead of the next TD. Therefore - * we have to omit the late TDs entirely. - */ - urb_priv->td_cnt = DIV_ROUND_UP(next - frame, - ed->interval); + /* + * Some OHCI hardware doesn't handle late TDs + * correctly. After retiring them it proceeds + * to the next ED instead of the next TD. + * Therefore we have to omit the late TDs + * entirely. + */ + urb_priv->td_cnt = DIV_ROUND_UP( + (u16) (next - frame), + ed->interval); + } } urb->start_frame = frame; } -- cgit v1.2.3 From 98f541c6e390d48643047e0924da8ccc10bb1598 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 1 May 2013 12:13:54 -0400 Subject: USB: remove remaining instances of USB_SUSPEND Commit 84ebc10294a3d7be4c66f51070b7aedbaa24de9b (USB: remove CONFIG_USB_SUSPEND option) failed to remove all of the usages of USB_SUSPEND throughout the kernel. This patch (as1677) removes the remaining instances of that symbol. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- arch/arm/configs/omap1_defconfig | 1 - arch/arm/configs/omap2plus_defconfig | 1 - arch/mips/configs/db1000_defconfig | 1 - arch/mips/configs/db1235_defconfig | 1 - arch/mips/configs/lemote2f_defconfig | 1 - arch/powerpc/configs/ps3_defconfig | 1 - drivers/net/usb/usbnet.c | 2 +- drivers/staging/gdm72xx/Kconfig | 2 +- drivers/usb/core/Kconfig | 2 +- drivers/usb/host/isp1760-hcd.c | 2 +- drivers/usb/host/oxu210hp-hcd.c | 2 +- drivers/usb/host/sl811-hcd.c | 2 +- drivers/usb/phy/Kconfig | 4 ++-- 13 files changed, 8 insertions(+), 14 deletions(-) diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 7e0ebb64a7f9..9940f7b4e438 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -199,7 +199,6 @@ CONFIG_USB_PHY=y CONFIG_USB_DEBUG=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c1ef64bc5abd..435d69b83e32 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -204,7 +204,6 @@ CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y -CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index face9d26e6d5..bac26b971c5e 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -228,7 +228,6 @@ CONFIG_HIDRAW=y CONFIG_USB_HID=y CONFIG_USB_SUPPORT=y CONFIG_USB=y -CONFIG_USB_SUSPEND=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y diff --git a/arch/mips/configs/db1235_defconfig b/arch/mips/configs/db1235_defconfig index 14752dde7540..e2b4ad55462f 100644 --- a/arch/mips/configs/db1235_defconfig +++ b/arch/mips/configs/db1235_defconfig @@ -344,7 +344,6 @@ CONFIG_UHID=y CONFIG_USB_HIDDEV=y CONFIG_USB=y CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_SUSPEND=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_EHCI_ROOT_HUB_TT=y diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index b6acd2f256b6..343bebc4b63b 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -300,7 +300,6 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_SUSPEND=y CONFIG_USB_OTG_WHITELIST=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index f79196232917..139a8308070c 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -136,7 +136,6 @@ CONFIG_HID_SMARTJOYPLUS=m CONFIG_USB_HIDDEV=y CONFIG_USB=m CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_SUSPEND=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_HCD_PPC_OF is not set diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index f95cb032394b..06ee82f557d4 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1477,7 +1477,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) /* usbnet already took usb runtime pm, so have to enable the feature * for usb interface, otherwise usb_autopm_get_interface may return - * failure if USB_SUSPEND(RUNTIME_PM) is enabled. + * failure if RUNTIME_PM is enabled. */ if (!driver->supports_autosuspend) { driver->supports_autosuspend = 1; diff --git a/drivers/staging/gdm72xx/Kconfig b/drivers/staging/gdm72xx/Kconfig index 3c18efe31365..69059138de4a 100644 --- a/drivers/staging/gdm72xx/Kconfig +++ b/drivers/staging/gdm72xx/Kconfig @@ -39,7 +39,7 @@ if WIMAX_GDM72XX_USB config WIMAX_GDM72XX_USB_PM bool "Enable power managerment support" - depends on USB_SUSPEND + depends on PM_RUNTIME endif # WIMAX_GDM72XX_USB diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 8772b3659296..db535b0aa172 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -51,7 +51,7 @@ config USB_DYNAMIC_MINORS config USB_OTG bool "OTG support" - depends on USB_SUSPEND + depends on PM_RUNTIME default n help The most notable feature of USB OTG is support for a diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 125e261f5bfc..2facee53eab1 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1739,7 +1739,7 @@ static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf) int retval = 1; unsigned long flags; - /* if !USB_SUSPEND, root hub timers won't get shut down ... */ + /* if !PM_RUNTIME, root hub timers won't get shut down ... */ if (!HC_IS_RUNNING(hcd->state)) return 0; diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 4f0f0339532f..0f401dbfaf07 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -3084,7 +3084,7 @@ static int oxu_hub_status_data(struct usb_hcd *hcd, char *buf) int ports, i, retval = 1; unsigned long flags; - /* if !USB_SUSPEND, root hub timers won't get shut down ... */ + /* if !PM_RUNTIME, root hub timers won't get shut down ... */ if (!HC_IS_RUNNING(hcd->state)) return 0; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index ad4483efb6d6..b2ec7fe758dd 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -22,7 +22,7 @@ * and usb-storage. * * TODO: - * - usb suspend/resume triggered by sl811 (with USB_SUSPEND) + * - usb suspend/resume triggered by sl811 (with PM_RUNTIME) * - various issues noted in the code * - performance work; use both register banks; ... * - use urb->iso_frame_desc[] with ISO transfers diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 5053cea0ad89..7ef3eb8617a6 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -25,7 +25,7 @@ config AB8500_USB config FSL_USB2_OTG bool "Freescale USB OTG Transceiver Driver" - depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND + depends on USB_EHCI_FSL && USB_FSL_USB2 && PM_RUNTIME select USB_OTG help Enable this to support Freescale USB OTG transceiver. @@ -161,7 +161,7 @@ config USB_MSM_OTG config USB_MV_OTG tristate "Marvell USB OTG support" - depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND + depends on USB_EHCI_MV && USB_MV_UDC && PM_RUNTIME select USB_OTG help Say Y here if you want to build Marvell USB OTG transciever -- cgit v1.2.3 From 60705c89460fdc7227f2d153b68b3f34814738a4 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Tue, 14 May 2013 15:40:48 -0400 Subject: tracing: Fix leaks of filter preds Special preds are created when folding a series of preds that can be done in serial. These are allocated in an ops field of the pred structure. But they were never freed, causing memory leaks. This was discovered using the kmemleak checker: unreferenced object 0xffff8800797fd5e0 (size 32): comm "swapper/0", pid 1, jiffies 4294690605 (age 104.608s) hex dump (first 32 bytes): 00 00 01 00 03 00 05 00 07 00 09 00 0b 00 0d 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kmemleak_alloc+0x73/0x98 [] kmemleak_alloc_recursive.constprop.42+0x16/0x18 [] __kmalloc+0xd7/0x125 [] kcalloc.constprop.24+0x2d/0x2f [] fold_pred_tree_cb+0xa9/0xf4 [] walk_pred_tree+0x47/0xcc [] replace_preds.isra.20+0x6f8/0x72f [] create_filter+0x4e/0x8b [] ftrace_test_event_filter+0x5a/0x155 [] do_one_initcall+0xa0/0x137 [] kernel_init_freeable+0x14d/0x1dc [] kernel_init+0xe/0xdb [] ret_from_fork+0x7c/0xb0 [] 0xffffffffffffffff Cc: Tom Zanussi Cc: stable@vger.kernel.org # 2.6.39+ Signed-off-by: Steven Rostedt --- kernel/trace/trace_events_filter.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c index a6361178de5a..e1b653f7e1ca 100644 --- a/kernel/trace/trace_events_filter.c +++ b/kernel/trace/trace_events_filter.c @@ -750,7 +750,11 @@ static int filter_set_pred(struct event_filter *filter, static void __free_preds(struct event_filter *filter) { + int i; + if (filter->preds) { + for (i = 0; i < filter->n_preds; i++) + kfree(filter->preds[i].ops); kfree(filter->preds); filter->preds = NULL; } -- cgit v1.2.3 From d36ccb9cec22a09a12d9ef8234d634f840d7ae4b Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 15 May 2013 10:46:33 -0700 Subject: SUNRPC: Fix a bug in gss_create_upcall If wait_event_interruptible_timeout() is successful, it returns the number of seconds remaining until the timeout. In that case, we should be retrying the upcall. Signed-off-by: Trond Myklebust --- net/sunrpc/auth_gss/auth_gss.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 7da6b457f66a..f17f3c581ff4 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -563,11 +563,12 @@ gss_create_upcall(struct gss_auth *gss_auth, struct gss_cred *gss_cred) struct rpc_cred *cred = &gss_cred->gc_base; struct gss_upcall_msg *gss_msg; DEFINE_WAIT(wait); - int err = 0; + int err; dprintk("RPC: %s for uid %u\n", __func__, from_kuid(&init_user_ns, cred->cr_uid)); retry: + err = 0; gss_msg = gss_setup_upcall(gss_auth->client, gss_auth, cred); if (PTR_ERR(gss_msg) == -EAGAIN) { err = wait_event_interruptible_timeout(pipe_version_waitqueue, @@ -576,7 +577,7 @@ retry: warn_gssd(); err = -EACCES; } - if (err) + if (err < 0) goto out; goto retry; } -- cgit v1.2.3 From c02c7e65d9b13670e34bc523744cf4f6e99c198a Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Mon, 13 May 2013 20:58:34 +0900 Subject: tracing/kprobes: Use rcu_dereference_raw for tp->files Use rcu_dereference_raw() for accessing tp->files. Because the write-side uses rcu_assign_pointer() for memory barrier, the read-side also has to use rcu_dereference_raw() with read memory barrier. Link: http://lkml.kernel.org/r/20130513115834.6545.17022.stgit@mhiramat-M0-7522 Cc: Srikar Dronamraju Cc: Oleg Nesterov Cc: Tom Zanussi Cc: Frederic Weisbecker Cc: Ingo Molnar Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt --- kernel/trace/trace_kprobe.c | 47 +++++++++++++++++++++++++++++++++++---------- 1 file changed, 37 insertions(+), 10 deletions(-) diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index 636d45fe69b3..0a3d8d5c483d 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -185,9 +185,14 @@ static struct trace_probe *find_trace_probe(const char *event, static int trace_probe_nr_files(struct trace_probe *tp) { - struct ftrace_event_file **file = tp->files; + struct ftrace_event_file **file; int ret = 0; + /* + * Since all tp->files updater is protected by probe_enable_lock, + * we don't need to lock an rcu_read_lock. + */ + file = rcu_dereference_raw(tp->files); if (file) while (*(file++)) ret++; @@ -209,9 +214,10 @@ enable_trace_probe(struct trace_probe *tp, struct ftrace_event_file *file) mutex_lock(&probe_enable_lock); if (file) { - struct ftrace_event_file **new, **old = tp->files; + struct ftrace_event_file **new, **old; int n = trace_probe_nr_files(tp); + old = rcu_dereference_raw(tp->files); /* 1 is for new one and 1 is for stopper */ new = kzalloc((n + 2) * sizeof(struct ftrace_event_file *), GFP_KERNEL); @@ -251,11 +257,17 @@ enable_trace_probe(struct trace_probe *tp, struct ftrace_event_file *file) static int trace_probe_file_index(struct trace_probe *tp, struct ftrace_event_file *file) { + struct ftrace_event_file **files; int i; - if (tp->files) { - for (i = 0; tp->files[i]; i++) - if (tp->files[i] == file) + /* + * Since all tp->files updater is protected by probe_enable_lock, + * we don't need to lock an rcu_read_lock. + */ + files = rcu_dereference_raw(tp->files); + if (files) { + for (i = 0; files[i]; i++) + if (files[i] == file) return i; } @@ -274,10 +286,11 @@ disable_trace_probe(struct trace_probe *tp, struct ftrace_event_file *file) mutex_lock(&probe_enable_lock); if (file) { - struct ftrace_event_file **new, **old = tp->files; + struct ftrace_event_file **new, **old; int n = trace_probe_nr_files(tp); int i, j; + old = rcu_dereference_raw(tp->files); if (n == 0 || trace_probe_file_index(tp, file) < 0) { ret = -EINVAL; goto out_unlock; @@ -872,9 +885,16 @@ __kprobe_trace_func(struct trace_probe *tp, struct pt_regs *regs, static __kprobes void kprobe_trace_func(struct trace_probe *tp, struct pt_regs *regs) { - struct ftrace_event_file **file = tp->files; + /* + * Note: preempt is already disabled around the kprobe handler. + * However, we still need an smp_read_barrier_depends() corresponding + * to smp_wmb() in rcu_assign_pointer() to access the pointer. + */ + struct ftrace_event_file **file = rcu_dereference_raw(tp->files); + + if (unlikely(!file)) + return; - /* Note: preempt is already disabled around the kprobe handler */ while (*file) { __kprobe_trace_func(tp, regs, *file); file++; @@ -925,9 +945,16 @@ static __kprobes void kretprobe_trace_func(struct trace_probe *tp, struct kretprobe_instance *ri, struct pt_regs *regs) { - struct ftrace_event_file **file = tp->files; + /* + * Note: preempt is already disabled around the kprobe handler. + * However, we still need an smp_read_barrier_depends() corresponding + * to smp_wmb() in rcu_assign_pointer() to access the pointer. + */ + struct ftrace_event_file **file = rcu_dereference_raw(tp->files); + + if (unlikely(!file)) + return; - /* Note: preempt is already disabled around the kprobe handler */ while (*file) { __kretprobe_trace_func(tp, ri, regs, *file); file++; -- cgit v1.2.3 From 3d1fc7b0880c4db612a3d3211a808659e28af588 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Mon, 13 May 2013 20:58:37 +0900 Subject: tracing/kprobes: Fix a sparse warning for incorrect type in assignment Fix a sparse warning about the rcu operated pointer is defined without __rcu address space. Link: http://lkml.kernel.org/r/20130513115837.6545.23322.stgit@mhiramat-M0-7522 Cc: Srikar Dronamraju Cc: Oleg Nesterov Cc: Tom Zanussi Cc: Frederic Weisbecker Cc: Ingo Molnar Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt --- kernel/trace/trace_kprobe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index 0a3d8d5c483d..81c5109b9d00 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -35,7 +35,7 @@ struct trace_probe { const char *symbol; /* symbol name */ struct ftrace_event_class class; struct ftrace_event_call call; - struct ftrace_event_file **files; + struct ftrace_event_file * __rcu *files; ssize_t size; /* trace entry size */ unsigned int nr_args; struct probe_arg args[]; -- cgit v1.2.3 From b62fdd97fcae17e483b005bafd13fadbd9840672 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Mon, 13 May 2013 20:58:39 +0900 Subject: tracing/kprobes: Make print_*probe_event static According to sparse warning, print_*probe_event static because those functions are not directly called from outside. Link: http://lkml.kernel.org/r/20130513115839.6545.83067.stgit@mhiramat-M0-7522 Cc: Srikar Dronamraju Cc: Oleg Nesterov Cc: Tom Zanussi Cc: Frederic Weisbecker Cc: Ingo Molnar Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt --- kernel/trace/trace_kprobe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index 81c5109b9d00..9f46e98ba8f2 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -962,7 +962,7 @@ kretprobe_trace_func(struct trace_probe *tp, struct kretprobe_instance *ri, } /* Event entry printers */ -enum print_line_t +static enum print_line_t print_kprobe_event(struct trace_iterator *iter, int flags, struct trace_event *event) { @@ -998,7 +998,7 @@ partial: return TRACE_TYPE_PARTIAL_LINE; } -enum print_line_t +static enum print_line_t print_kretprobe_event(struct trace_iterator *iter, int flags, struct trace_event *event) { -- cgit v1.2.3 From 186f27ff9f9ec5c110739ced88ce9f8fca053882 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Tue, 22 Jan 2013 11:35:40 -0700 Subject: NTB: variable dereferenced before check Correct instances of variable dereferencing before checking its value on the functions exported to the client drivers. Also, add sanity checks for all exported functions. Reported-by: Dan Carpenter Signed-off-by: Jon Mason --- drivers/ntb/ntb_transport.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index e0bdfd7f9930..74c58125acfc 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -1210,12 +1210,14 @@ EXPORT_SYMBOL_GPL(ntb_transport_create_queue); */ void ntb_transport_free_queue(struct ntb_transport_qp *qp) { - struct pci_dev *pdev = ntb_query_pdev(qp->ndev); + struct pci_dev *pdev; struct ntb_queue_entry *entry; if (!qp) return; + pdev = ntb_query_pdev(qp->ndev); + cancel_delayed_work_sync(&qp->link_work); ntb_unregister_db_callback(qp->ndev, qp->qp_num); @@ -1371,12 +1373,13 @@ EXPORT_SYMBOL_GPL(ntb_transport_link_up); */ void ntb_transport_link_down(struct ntb_transport_qp *qp) { - struct pci_dev *pdev = ntb_query_pdev(qp->ndev); + struct pci_dev *pdev; int rc, val; if (!qp) return; + pdev = ntb_query_pdev(qp->ndev); qp->client_ready = NTB_LINK_DOWN; rc = ntb_read_local_spad(qp->ndev, QP_LINKS, &val); @@ -1408,6 +1411,9 @@ EXPORT_SYMBOL_GPL(ntb_transport_link_down); */ bool ntb_transport_link_query(struct ntb_transport_qp *qp) { + if (!qp) + return false; + return qp->qp_link == NTB_LINK_UP; } EXPORT_SYMBOL_GPL(ntb_transport_link_query); @@ -1422,6 +1428,9 @@ EXPORT_SYMBOL_GPL(ntb_transport_link_query); */ unsigned char ntb_transport_qp_num(struct ntb_transport_qp *qp) { + if (!qp) + return 0; + return qp->qp_num; } EXPORT_SYMBOL_GPL(ntb_transport_qp_num); @@ -1436,6 +1445,9 @@ EXPORT_SYMBOL_GPL(ntb_transport_qp_num); */ unsigned int ntb_transport_max_size(struct ntb_transport_qp *qp) { + if (!qp) + return 0; + return qp->tx_max_frame - sizeof(struct ntb_payload_header); } EXPORT_SYMBOL_GPL(ntb_transport_max_size); -- cgit v1.2.3 From ad3e2751e7c546ae678be1f8d86e898506b42cef Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 22 Jan 2013 10:19:14 +0300 Subject: ntb: off by one sanity checks These tests are off by one. If "mw" is equal to NTB_NUM_MW then we would go beyond the end of the ndev->mw[] array. Signed-off-by: Dan Carpenter Signed-off-by: Jon Mason --- drivers/ntb/ntb_hw.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c index f802e7c92356..195cc51ffbf6 100644 --- a/drivers/ntb/ntb_hw.c +++ b/drivers/ntb/ntb_hw.c @@ -345,7 +345,7 @@ int ntb_read_remote_spad(struct ntb_device *ndev, unsigned int idx, u32 *val) */ void __iomem *ntb_get_mw_vbase(struct ntb_device *ndev, unsigned int mw) { - if (mw > NTB_NUM_MW) + if (mw >= NTB_NUM_MW) return NULL; return ndev->mw[mw].vbase; @@ -362,7 +362,7 @@ void __iomem *ntb_get_mw_vbase(struct ntb_device *ndev, unsigned int mw) */ resource_size_t ntb_get_mw_size(struct ntb_device *ndev, unsigned int mw) { - if (mw > NTB_NUM_MW) + if (mw >= NTB_NUM_MW) return 0; return ndev->mw[mw].bar_sz; @@ -380,7 +380,7 @@ resource_size_t ntb_get_mw_size(struct ntb_device *ndev, unsigned int mw) */ void ntb_set_mw_addr(struct ntb_device *ndev, unsigned int mw, u64 addr) { - if (mw > NTB_NUM_MW) + if (mw >= NTB_NUM_MW) return; dev_dbg(&ndev->pdev->dev, "Writing addr %Lx to BAR %d\n", addr, -- cgit v1.2.3 From cc0f868d8adef7bdc12cda132654870086d766bc Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 23 Jan 2013 22:26:05 +0300 Subject: NTB: fix pointer math issues ->remote_rx_info and ->rx_info are struct ntb_rx_info pointers. If we add sizeof(struct ntb_rx_info) then it goes too far. Signed-off-by: Dan Carpenter Signed-off-by: Jon Mason --- drivers/ntb/ntb_transport.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index 74c58125acfc..00f5e80dee35 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -486,7 +486,7 @@ static void ntb_transport_setup_qp_mw(struct ntb_transport *nt, (qp_num / NTB_NUM_MW * rx_size); rx_size -= sizeof(struct ntb_rx_info); - qp->rx_buff = qp->remote_rx_info + sizeof(struct ntb_rx_info); + qp->rx_buff = qp->remote_rx_info + 1; qp->rx_max_frame = min(transport_mtu, rx_size); qp->rx_max_entry = rx_size / qp->rx_max_frame; qp->rx_index = 0; @@ -780,7 +780,7 @@ static void ntb_transport_init_queue(struct ntb_transport *nt, (qp_num / NTB_NUM_MW * tx_size); tx_size -= sizeof(struct ntb_rx_info); - qp->tx_mw = qp->rx_info + sizeof(struct ntb_rx_info); + qp->tx_mw = qp->rx_info + 1; qp->tx_max_frame = min(transport_mtu, tx_size); qp->tx_max_entry = tx_size / qp->tx_max_frame; qp->tx_index = 0; -- cgit v1.2.3 From 113fc505b83b2d16e820ca74fa07f99a34877b1d Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Wed, 30 Jan 2013 11:40:52 -0700 Subject: NTB: Handle 64bit BAR sizes 64bit BAR sizes are permissible with an NTB device. To support them various modifications and clean-ups were required, most significantly using 2 32bit scratch pad registers for each BAR. Also, modify the driver to allow more than 2 Memory Windows. Signed-off-by: Jon Mason --- drivers/ntb/ntb_hw.c | 4 +- drivers/ntb/ntb_transport.c | 121 ++++++++++++++++++++++++++------------------ 2 files changed, 75 insertions(+), 50 deletions(-) diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c index 195cc51ffbf6..2dacd19e1b8a 100644 --- a/drivers/ntb/ntb_hw.c +++ b/drivers/ntb/ntb_hw.c @@ -1027,8 +1027,8 @@ static int ntb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) ndev->mw[i].vbase = ioremap_wc(pci_resource_start(pdev, MW_TO_BAR(i)), ndev->mw[i].bar_sz); - dev_info(&pdev->dev, "MW %d size %d\n", i, - (u32) pci_resource_len(pdev, MW_TO_BAR(i))); + dev_info(&pdev->dev, "MW %d size %llu\n", i, + pci_resource_len(pdev, MW_TO_BAR(i))); if (!ndev->mw[i].vbase) { dev_warn(&pdev->dev, "Cannot remap BAR %d\n", MW_TO_BAR(i)); diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index 00f5e80dee35..79a3203eccd9 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -58,7 +58,7 @@ #include #include "ntb_hw.h" -#define NTB_TRANSPORT_VERSION 2 +#define NTB_TRANSPORT_VERSION 3 static unsigned int transport_mtu = 0x401E; module_param(transport_mtu, uint, 0644); @@ -173,10 +173,13 @@ struct ntb_payload_header { enum { VERSION = 0, - MW0_SZ, - MW1_SZ, - NUM_QPS, QP_LINKS, + NUM_QPS, + NUM_MWS, + MW0_SZ_HIGH, + MW0_SZ_LOW, + MW1_SZ_HIGH, + MW1_SZ_LOW, MAX_SPAD, }; @@ -526,6 +529,18 @@ static int ntb_set_mw(struct ntb_transport *nt, int num_mw, unsigned int size) return 0; } +static void ntb_free_mw(struct ntb_transport *nt, int num_mw) +{ + struct ntb_transport_mw *mw = &nt->mw[num_mw]; + struct pci_dev *pdev = ntb_query_pdev(nt->ndev); + + if (!mw->virt_addr) + return; + + dma_free_coherent(&pdev->dev, mw->size, mw->virt_addr, mw->dma_addr); + mw->virt_addr = NULL; +} + static void ntb_qp_link_cleanup(struct work_struct *work) { struct ntb_transport_qp *qp = container_of(work, @@ -604,25 +619,31 @@ static void ntb_transport_link_work(struct work_struct *work) u32 val; int rc, i; - /* send the local info */ - rc = ntb_write_remote_spad(ndev, VERSION, NTB_TRANSPORT_VERSION); - if (rc) { - dev_err(&pdev->dev, "Error writing %x to remote spad %d\n", - 0, VERSION); - goto out; - } + /* send the local info, in the opposite order of the way we read it */ + for (i = 0; i < NTB_NUM_MW; i++) { + rc = ntb_write_remote_spad(ndev, MW0_SZ_HIGH + (i * 2), + ntb_get_mw_size(ndev, i) >> 32); + if (rc) { + dev_err(&pdev->dev, "Error writing %u to remote spad %d\n", + (u32)(ntb_get_mw_size(ndev, i) >> 32), + MW0_SZ_HIGH + (i * 2)); + goto out; + } - rc = ntb_write_remote_spad(ndev, MW0_SZ, ntb_get_mw_size(ndev, 0)); - if (rc) { - dev_err(&pdev->dev, "Error writing %x to remote spad %d\n", - (u32) ntb_get_mw_size(ndev, 0), MW0_SZ); - goto out; + rc = ntb_write_remote_spad(ndev, MW0_SZ_LOW + (i * 2), + (u32) ntb_get_mw_size(ndev, i)); + if (rc) { + dev_err(&pdev->dev, "Error writing %u to remote spad %d\n", + (u32) ntb_get_mw_size(ndev, i), + MW0_SZ_LOW + (i * 2)); + goto out; + } } - rc = ntb_write_remote_spad(ndev, MW1_SZ, ntb_get_mw_size(ndev, 1)); + rc = ntb_write_remote_spad(ndev, NUM_MWS, NTB_NUM_MW); if (rc) { dev_err(&pdev->dev, "Error writing %x to remote spad %d\n", - (u32) ntb_get_mw_size(ndev, 1), MW1_SZ); + NTB_NUM_MW, NUM_MWS); goto out; } @@ -633,16 +654,10 @@ static void ntb_transport_link_work(struct work_struct *work) goto out; } - rc = ntb_read_local_spad(nt->ndev, QP_LINKS, &val); - if (rc) { - dev_err(&pdev->dev, "Error reading spad %d\n", QP_LINKS); - goto out; - } - - rc = ntb_write_remote_spad(ndev, QP_LINKS, val); + rc = ntb_write_remote_spad(ndev, VERSION, NTB_TRANSPORT_VERSION); if (rc) { dev_err(&pdev->dev, "Error writing %x to remote spad %d\n", - val, QP_LINKS); + NTB_TRANSPORT_VERSION, VERSION); goto out; } @@ -667,33 +682,43 @@ static void ntb_transport_link_work(struct work_struct *work) goto out; dev_dbg(&pdev->dev, "Remote max number of qps = %d\n", val); - rc = ntb_read_remote_spad(ndev, MW0_SZ, &val); + rc = ntb_read_remote_spad(ndev, NUM_MWS, &val); if (rc) { - dev_err(&pdev->dev, "Error reading remote spad %d\n", MW0_SZ); + dev_err(&pdev->dev, "Error reading remote spad %d\n", NUM_MWS); goto out; } - if (!val) + if (val != NTB_NUM_MW) goto out; - dev_dbg(&pdev->dev, "Remote MW0 size = %d\n", val); + dev_dbg(&pdev->dev, "Remote number of mws = %d\n", val); - rc = ntb_set_mw(nt, 0, val); - if (rc) - goto out; + for (i = 0; i < NTB_NUM_MW; i++) { + u64 val64; - rc = ntb_read_remote_spad(ndev, MW1_SZ, &val); - if (rc) { - dev_err(&pdev->dev, "Error reading remote spad %d\n", MW1_SZ); - goto out; - } + rc = ntb_read_remote_spad(ndev, MW0_SZ_HIGH + (i * 2), &val); + if (rc) { + dev_err(&pdev->dev, "Error reading remote spad %d\n", + MW0_SZ_HIGH + (i * 2)); + goto out1; + } - if (!val) - goto out; - dev_dbg(&pdev->dev, "Remote MW1 size = %d\n", val); + val64 = (u64) val << 32; - rc = ntb_set_mw(nt, 1, val); - if (rc) - goto out; + rc = ntb_read_remote_spad(ndev, MW0_SZ_LOW + (i * 2), &val); + if (rc) { + dev_err(&pdev->dev, "Error reading remote spad %d\n", + MW0_SZ_LOW + (i * 2)); + goto out1; + } + + val64 |= val; + + dev_dbg(&pdev->dev, "Remote MW%d size = %llu\n", i, val64); + + rc = ntb_set_mw(nt, i, val64); + if (rc) + goto out1; + } nt->transport_link = NTB_LINK_UP; @@ -708,6 +733,9 @@ static void ntb_transport_link_work(struct work_struct *work) return; +out1: + for (i = 0; i < NTB_NUM_MW; i++) + ntb_free_mw(nt, i); out: if (ntb_hw_link_status(ndev)) schedule_delayed_work(&nt->link_work, @@ -897,10 +925,7 @@ void ntb_transport_free(void *transport) pdev = ntb_query_pdev(nt->ndev); for (i = 0; i < NTB_NUM_MW; i++) - if (nt->mw[i].virt_addr) - dma_free_coherent(&pdev->dev, nt->mw[i].size, - nt->mw[i].virt_addr, - nt->mw[i].dma_addr); + ntb_free_mw(nt, i); kfree(nt->qps); ntb_unregister_transport(nt->ndev); -- cgit v1.2.3 From b77b2637b39ecc380bb08992380d7d48452b0872 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Fri, 1 Feb 2013 15:25:37 -0700 Subject: NTB: Link toggle memory leak Each link-up will allocate a new NTB receive buffer when the NTB properties are negotiated with the remote system. These allocations did not check for existing buffers and thus did not free them. Now, the driver will check for an existing buffer and free it if not of the correct size, before trying to alloc a new one. Signed-off-by: Jon Mason --- drivers/ntb/ntb_transport.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index 79a3203eccd9..be416d6850f0 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -507,17 +507,37 @@ static void ntb_transport_setup_qp_mw(struct ntb_transport *nt, qp->tx_pkts = 0; } +static void ntb_free_mw(struct ntb_transport *nt, int num_mw) +{ + struct ntb_transport_mw *mw = &nt->mw[num_mw]; + struct pci_dev *pdev = ntb_query_pdev(nt->ndev); + + if (!mw->virt_addr) + return; + + dma_free_coherent(&pdev->dev, mw->size, mw->virt_addr, mw->dma_addr); + mw->virt_addr = NULL; +} + static int ntb_set_mw(struct ntb_transport *nt, int num_mw, unsigned int size) { struct ntb_transport_mw *mw = &nt->mw[num_mw]; struct pci_dev *pdev = ntb_query_pdev(nt->ndev); + /* No need to re-setup */ + if (mw->size == ALIGN(size, 4096)) + return 0; + + if (mw->size != 0) + ntb_free_mw(nt, num_mw); + /* Alloc memory for receiving data. Must be 4k aligned */ mw->size = ALIGN(size, 4096); mw->virt_addr = dma_alloc_coherent(&pdev->dev, mw->size, &mw->dma_addr, GFP_KERNEL); if (!mw->virt_addr) { + mw->size = 0; dev_err(&pdev->dev, "Unable to allocate MW buffer of size %d\n", (int) mw->size); return -ENOMEM; @@ -529,18 +549,6 @@ static int ntb_set_mw(struct ntb_transport *nt, int num_mw, unsigned int size) return 0; } -static void ntb_free_mw(struct ntb_transport *nt, int num_mw) -{ - struct ntb_transport_mw *mw = &nt->mw[num_mw]; - struct pci_dev *pdev = ntb_query_pdev(nt->ndev); - - if (!mw->virt_addr) - return; - - dma_free_coherent(&pdev->dev, mw->size, mw->virt_addr, mw->dma_addr); - mw->virt_addr = NULL; -} - static void ntb_qp_link_cleanup(struct work_struct *work) { struct ntb_transport_qp *qp = container_of(work, -- cgit v1.2.3 From 90f9e934647e652a69396e18c779215a493271cf Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Fri, 1 Feb 2013 15:34:35 -0700 Subject: NTB: reset tx_index on link toggle If the NTB link toggles, the driver could stop receiving due to the tx_index not being set to 0 on the transmitting size on a link-up event. This is due to the driver expecting the incoming data to start at the beginning of the receive buffer and not at a random place. Signed-off-by: Jon Mason --- drivers/ntb/ntb_transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index be416d6850f0..73a000ed7a9f 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -505,6 +505,7 @@ static void ntb_transport_setup_qp_mw(struct ntb_transport *nt, qp->rx_pkts = 0; qp->tx_pkts = 0; + qp->tx_index = 0; } static void ntb_free_mw(struct ntb_transport *nt, int num_mw) @@ -819,7 +820,6 @@ static void ntb_transport_init_queue(struct ntb_transport *nt, qp->tx_mw = qp->rx_info + 1; qp->tx_max_frame = min(transport_mtu, tx_size); qp->tx_max_entry = tx_size / qp->tx_max_frame; - qp->tx_index = 0; if (nt->debugfs_dir) { char debugfs_name[4]; -- cgit v1.2.3 From c9d534c8cbaedbb522a1d2cb037c6c394f610317 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Fri, 1 Feb 2013 15:45:16 -0700 Subject: NTB: Correctly handle receive buffers of the minimal size The ring logic of the NTB receive buffer/transmit memory window requires there to be at least 2 payload sized allotments. For the minimal size case, split the buffer into two and set the transport_mtu to the appropriate size. Signed-off-by: Jon Mason --- drivers/ntb/ntb_transport.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index 73a000ed7a9f..cd9745b062e4 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -490,11 +490,12 @@ static void ntb_transport_setup_qp_mw(struct ntb_transport *nt, rx_size -= sizeof(struct ntb_rx_info); qp->rx_buff = qp->remote_rx_info + 1; - qp->rx_max_frame = min(transport_mtu, rx_size); + /* Due to housekeeping, there must be atleast 2 buffs */ + qp->rx_max_frame = min(transport_mtu, rx_size / 2); qp->rx_max_entry = rx_size / qp->rx_max_frame; qp->rx_index = 0; - qp->remote_rx_info->entry = qp->rx_max_entry; + qp->remote_rx_info->entry = qp->rx_max_entry - 1; /* setup the hdr offsets with 0's */ for (i = 0; i < qp->rx_max_entry; i++) { @@ -818,7 +819,8 @@ static void ntb_transport_init_queue(struct ntb_transport *nt, tx_size -= sizeof(struct ntb_rx_info); qp->tx_mw = qp->rx_info + 1; - qp->tx_max_frame = min(transport_mtu, tx_size); + /* Due to housekeeping, there must be atleast 2 buffs */ + qp->tx_max_frame = min(transport_mtu, tx_size / 2); qp->tx_max_entry = tx_size / qp->tx_max_frame; if (nt->debugfs_dir) { -- cgit v1.2.3 From c336acd3331dcc191a97dbc66a557d47741657c7 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Thu, 17 Jan 2013 15:28:45 -0700 Subject: NTB: memcpy lockup workaround The system will appear to lockup for long periods of time due to the NTB driver spending too much time in memcpy. Avoid this by reducing the number of packets that can be serviced on a given interrupt. Signed-off-by: Jon Mason --- drivers/ntb/ntb_transport.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index cd9745b062e4..583a7d3f0ce1 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -1034,11 +1034,16 @@ out: static void ntb_transport_rx(unsigned long data) { struct ntb_transport_qp *qp = (struct ntb_transport_qp *)data; - int rc; + int rc, i; - do { + /* Limit the number of packets processed in a single interrupt to + * provide fairness to others + */ + for (i = 0; i < qp->rx_max_entry; i++) { rc = ntb_process_rxc(qp); - } while (!rc); + if (rc) + break; + } } static void ntb_transport_rxc_db(void *data, int db_num) -- cgit v1.2.3 From 904435cf76a9bdd5eb41b1c4e049d5a64f3a8400 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Thu, 18 Apr 2013 13:36:43 -0700 Subject: ntb_netdev: remove from list on exit The ntb_netdev device is not removed from the global list of devices upon device removal. If the device is re-added, the removal code would find the first instance and try to remove an already removed device. Signed-off-by: Jon Mason --- drivers/net/ntb_netdev.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ntb_netdev.c b/drivers/net/ntb_netdev.c index ed947dd76fbd..f3cdf64997d6 100644 --- a/drivers/net/ntb_netdev.c +++ b/drivers/net/ntb_netdev.c @@ -375,6 +375,8 @@ static void ntb_netdev_remove(struct pci_dev *pdev) if (dev == NULL) return; + list_del(&dev->list); + ndev = dev->ndev; unregister_netdev(ndev); -- cgit v1.2.3 From 8b19d450ad188d402a183ff4a4d40f31c3916fbf Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Fri, 26 Apr 2013 14:51:57 -0700 Subject: NTB: Multiple NTB client fix Fix issue with adding multiple ntb client devices to the ntb virtual bus. Previously, multiple devices would be added with the same name, resulting in crashes. To get around this issue, add a unique number to the device when it is added. Signed-off-by: Jon Mason --- drivers/ntb/ntb_transport.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index 583a7d3f0ce1..f8d7081ee301 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -300,7 +300,7 @@ int ntb_register_client_dev(char *device_name) { struct ntb_transport_client_dev *client_dev; struct ntb_transport *nt; - int rc; + int rc, i = 0; if (list_empty(&ntb_transport_list)) return -ENODEV; @@ -318,7 +318,7 @@ int ntb_register_client_dev(char *device_name) dev = &client_dev->dev; /* setup and register client devices */ - dev_set_name(dev, "%s", device_name); + dev_set_name(dev, "%s%d", device_name, i); dev->bus = &ntb_bus_type; dev->release = ntb_client_release; dev->parent = &ntb_query_pdev(nt->ndev)->dev; @@ -330,6 +330,7 @@ int ntb_register_client_dev(char *device_name) } list_add_tail(&client_dev->entry, &nt->client_devs); + i++; } return 0; -- cgit v1.2.3 From 7a26b53070f0099dfcfc9d499458de861c5c4859 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 15 May 2013 16:49:35 +0000 Subject: ACPI / scan: Fix memory leak on acpi_scan_init_hotplug() error path Following commit 6b772e8f9 (ACPI: Update PNPID match handling for notify), the acpi_scan_init_hotplug() calls acpi_set_pnp_ids() which allocates acpi_hardware_id and copies a few strings (kstrdup). If the devices does not have hardware_id set, the function exits without freeing the previously allocated ids (and kmemleak complains). This patch calls simply changes 'return' on error to a 'goto out' which calls acpi_free_pnp_ids(). Reported-by: Larry Finger Signed-off-by: Catalin Marinas Reviewed-by: Toshi Kani Tested-by: Toshi Kani Signed-off-by: Rafael J. Wysocki --- drivers/acpi/scan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index fe158fd4f1df..c1bc608339a6 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1785,7 +1785,7 @@ static void acpi_scan_init_hotplug(acpi_handle handle, int type) acpi_set_pnp_ids(handle, &pnp, type); if (!pnp.type.hardware_id) - return; + goto out; /* * This relies on the fact that acpi_install_notify_handler() will not @@ -1800,6 +1800,7 @@ static void acpi_scan_init_hotplug(acpi_handle handle, int type) } } +out: acpi_free_pnp_ids(&pnp); } -- cgit v1.2.3 From a66b2e503fc79fff6632d02ef5a0ee47c1d2553d Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Wed, 15 May 2013 21:47:17 +0200 Subject: cpufreq: Preserve sysfs files across suspend/resume The file permissions of cpufreq per-cpu sysfs files are not preserved across suspend/resume because we internally go through the CPU Hotplug path which reinitializes the file permissions on CPU online. But the user is not supposed to know that we are using CPU hotplug internally within suspend/resume (IOW, the kernel should not silently wreck the user-set file permissions across a suspend cycle). Therefore, we need to preserve the file permissions as they are across suspend/resume. The simplest way to achieve that is to just not touch the sysfs files at all - ie., just ignore the CPU hotplug notifications in the suspend/resume path (_FROZEN) in the cpufreq hotplug callback. Reported-by: Robert Jarzmik Reported-by: Durgadoss R Signed-off-by: Srivatsa S. Bhat Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq.c | 4 +--- drivers/cpufreq/cpufreq_stats.c | 7 ++++--- 2 files changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index b7acfd153bf9..4b8c7f297d74 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1832,15 +1832,13 @@ static int __cpuinit cpufreq_cpu_callback(struct notifier_block *nfb, if (dev) { switch (action) { case CPU_ONLINE: - case CPU_ONLINE_FROZEN: cpufreq_add_dev(dev, NULL); break; case CPU_DOWN_PREPARE: - case CPU_DOWN_PREPARE_FROZEN: + case CPU_UP_CANCELED_FROZEN: __cpufreq_remove_dev(dev, NULL); break; case CPU_DOWN_FAILED: - case CPU_DOWN_FAILED_FROZEN: cpufreq_add_dev(dev, NULL); break; } diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index bfd6273fd873..fb65decffa28 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -349,15 +349,16 @@ static int __cpuinit cpufreq_stat_cpu_callback(struct notifier_block *nfb, switch (action) { case CPU_ONLINE: - case CPU_ONLINE_FROZEN: cpufreq_update_policy(cpu); break; case CPU_DOWN_PREPARE: - case CPU_DOWN_PREPARE_FROZEN: cpufreq_stats_free_sysfs(cpu); break; case CPU_DEAD: - case CPU_DEAD_FROZEN: + cpufreq_stats_free_table(cpu); + break; + case CPU_UP_CANCELED_FROZEN: + cpufreq_stats_free_sysfs(cpu); cpufreq_stats_free_table(cpu); break; } -- cgit v1.2.3 From 1be0c25da56e860992af972a60321563ca2cfcd1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 May 2013 14:24:24 -0700 Subject: workqueue: don't perform NUMA-aware allocations on offline nodes in wq_numa_init() wq_numa_init() builds per-node cpumasks which are later used to make unbound workqueues NUMA-aware. The cpumasks are allocated using alloc_cpumask_var_node() for all possible nodes. Unfortunately, on machines with off-line nodes, this leads to NUMA-aware allocations on existing bug offline nodes, which in turn triggers BUG in the memory allocation code. Fix it by using NUMA_NO_NODE for cpumask allocations for offline nodes. kernel BUG at include/linux/gfp.h:323! invalid opcode: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0+ #1 Hardware name: ProLiant BL465c G7, BIOS A19 12/10/2011 task: ffff880234608000 ti: ffff880234602000 task.ti: ffff880234602000 RIP: 0010:[] [] new_slab+0x2ad/0x340 RSP: 0000:ffff880234603bf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880237404b40 RCX: 00000000000000d0 RDX: 0000000000000001 RSI: 0000000000000003 RDI: 00000000002052d0 RBP: ffff880234603c28 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000001 R11: ffffffff812e3aa8 R12: 0000000000000001 R13: ffff8802378161c0 R14: 0000000000030027 R15: 00000000000040d0 FS: 0000000000000000(0000) GS:ffff880237800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88043fdff000 CR3: 00000000018d5000 CR4: 00000000000007f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880234603c28 0000000000000001 00000000000000d0 ffff8802378161c0 ffff880237404b40 ffff880237404b40 ffff880234603d28 ffffffff815edba1 ffff880237816140 0000000000000000 ffff88023740e1c0 Call Trace: [] __slab_alloc+0x330/0x4f2 [] kmem_cache_alloc_node_trace+0xa5/0x200 [] alloc_cpumask_var_node+0x28/0x90 [] wq_numa_init+0x10d/0x1be [] init_workqueues+0x64/0x341 [] do_one_initcall+0xea/0x1a0 [] kernel_init_freeable+0xb7/0x1ec [] kernel_init+0xe/0xf0 [] ret_from_fork+0x7c/0xb0 Code: 45 84 ac 00 00 00 f0 41 80 4d 00 40 e9 f6 fe ff ff 66 0f 1f 84 00 00 00 00 00 e8 eb 4b ff ff 49 89 c5 e9 05 fe ff ff <0f> 0b 4c 8b 73 38 44 89 ff 81 cf 00 00 20 00 4c 89 f6 48 c1 ee Signed-off-by: Tejun Heo Reported-and-Tested-by: Lingzhu Xiang --- kernel/workqueue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 02916f421385..ee8e29a2320c 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -4905,7 +4905,8 @@ static void __init wq_numa_init(void) BUG_ON(!tbl); for_each_node(node) - BUG_ON(!alloc_cpumask_var_node(&tbl[node], GFP_KERNEL, node)); + BUG_ON(!alloc_cpumask_var_node(&tbl[node], GFP_KERNEL, + node_online(node) ? node : NUMA_NO_NODE)); for_each_possible_cpu(cpu) { node = cpu_to_node(cpu); -- cgit v1.2.3 From 0d709d91b85b71568b41b323d2a2c761f18e5213 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 14 May 2013 21:20:02 +0000 Subject: ipg: fix an unsigned widening cast of '~' truncation issue The bug here is this code from ipg_nic_hard_start_xmit(): txfd->tfc &= cpu_to_le64(~IPG_TFC_TFDDONE); IPG_TFC_TFDDONE is 0x0000000080000000 so it's an unsigned int. The negated value is 0x7fffffff but 0xffffffff7fffffff was intended. The other values in this file don't need to be changed but I did it for consistency. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/icplus/ipg.h | 86 +++++++++++++++++++-------------------- 1 file changed, 43 insertions(+), 43 deletions(-) diff --git a/drivers/net/ethernet/icplus/ipg.h b/drivers/net/ethernet/icplus/ipg.h index 6ce027355fcf..abb300a31912 100644 --- a/drivers/net/ethernet/icplus/ipg.h +++ b/drivers/net/ethernet/icplus/ipg.h @@ -195,57 +195,57 @@ enum ipg_regs { /* TFD data structure masks. */ /* TFDList, TFC */ -#define IPG_TFC_RSVD_MASK 0x0000FFFF9FFFFFFF -#define IPG_TFC_FRAMEID 0x000000000000FFFF -#define IPG_TFC_WORDALIGN 0x0000000000030000 -#define IPG_TFC_WORDALIGNTODWORD 0x0000000000000000 -#define IPG_TFC_WORDALIGNTOWORD 0x0000000000020000 -#define IPG_TFC_WORDALIGNDISABLED 0x0000000000030000 -#define IPG_TFC_TCPCHECKSUMENABLE 0x0000000000040000 -#define IPG_TFC_UDPCHECKSUMENABLE 0x0000000000080000 -#define IPG_TFC_IPCHECKSUMENABLE 0x0000000000100000 -#define IPG_TFC_FCSAPPENDDISABLE 0x0000000000200000 -#define IPG_TFC_TXINDICATE 0x0000000000400000 -#define IPG_TFC_TXDMAINDICATE 0x0000000000800000 -#define IPG_TFC_FRAGCOUNT 0x000000000F000000 -#define IPG_TFC_VLANTAGINSERT 0x0000000010000000 -#define IPG_TFC_TFDDONE 0x0000000080000000 -#define IPG_TFC_VID 0x00000FFF00000000 -#define IPG_TFC_CFI 0x0000100000000000 -#define IPG_TFC_USERPRIORITY 0x0000E00000000000 +#define IPG_TFC_RSVD_MASK 0x0000FFFF9FFFFFFFULL +#define IPG_TFC_FRAMEID 0x000000000000FFFFULL +#define IPG_TFC_WORDALIGN 0x0000000000030000ULL +#define IPG_TFC_WORDALIGNTODWORD 0x0000000000000000ULL +#define IPG_TFC_WORDALIGNTOWORD 0x0000000000020000ULL +#define IPG_TFC_WORDALIGNDISABLED 0x0000000000030000ULL +#define IPG_TFC_TCPCHECKSUMENABLE 0x0000000000040000ULL +#define IPG_TFC_UDPCHECKSUMENABLE 0x0000000000080000ULL +#define IPG_TFC_IPCHECKSUMENABLE 0x0000000000100000ULL +#define IPG_TFC_FCSAPPENDDISABLE 0x0000000000200000ULL +#define IPG_TFC_TXINDICATE 0x0000000000400000ULL +#define IPG_TFC_TXDMAINDICATE 0x0000000000800000ULL +#define IPG_TFC_FRAGCOUNT 0x000000000F000000ULL +#define IPG_TFC_VLANTAGINSERT 0x0000000010000000ULL +#define IPG_TFC_TFDDONE 0x0000000080000000ULL +#define IPG_TFC_VID 0x00000FFF00000000ULL +#define IPG_TFC_CFI 0x0000100000000000ULL +#define IPG_TFC_USERPRIORITY 0x0000E00000000000ULL /* TFDList, FragInfo */ -#define IPG_TFI_RSVD_MASK 0xFFFF00FFFFFFFFFF -#define IPG_TFI_FRAGADDR 0x000000FFFFFFFFFF -#define IPG_TFI_FRAGLEN 0xFFFF000000000000LL +#define IPG_TFI_RSVD_MASK 0xFFFF00FFFFFFFFFFULL +#define IPG_TFI_FRAGADDR 0x000000FFFFFFFFFFULL +#define IPG_TFI_FRAGLEN 0xFFFF000000000000ULL /* RFD data structure masks. */ /* RFDList, RFS */ -#define IPG_RFS_RSVD_MASK 0x0000FFFFFFFFFFFF -#define IPG_RFS_RXFRAMELEN 0x000000000000FFFF -#define IPG_RFS_RXFIFOOVERRUN 0x0000000000010000 -#define IPG_RFS_RXRUNTFRAME 0x0000000000020000 -#define IPG_RFS_RXALIGNMENTERROR 0x0000000000040000 -#define IPG_RFS_RXFCSERROR 0x0000000000080000 -#define IPG_RFS_RXOVERSIZEDFRAME 0x0000000000100000 -#define IPG_RFS_RXLENGTHERROR 0x0000000000200000 -#define IPG_RFS_VLANDETECTED 0x0000000000400000 -#define IPG_RFS_TCPDETECTED 0x0000000000800000 -#define IPG_RFS_TCPERROR 0x0000000001000000 -#define IPG_RFS_UDPDETECTED 0x0000000002000000 -#define IPG_RFS_UDPERROR 0x0000000004000000 -#define IPG_RFS_IPDETECTED 0x0000000008000000 -#define IPG_RFS_IPERROR 0x0000000010000000 -#define IPG_RFS_FRAMESTART 0x0000000020000000 -#define IPG_RFS_FRAMEEND 0x0000000040000000 -#define IPG_RFS_RFDDONE 0x0000000080000000 -#define IPG_RFS_TCI 0x0000FFFF00000000 +#define IPG_RFS_RSVD_MASK 0x0000FFFFFFFFFFFFULL +#define IPG_RFS_RXFRAMELEN 0x000000000000FFFFULL +#define IPG_RFS_RXFIFOOVERRUN 0x0000000000010000ULL +#define IPG_RFS_RXRUNTFRAME 0x0000000000020000ULL +#define IPG_RFS_RXALIGNMENTERROR 0x0000000000040000ULL +#define IPG_RFS_RXFCSERROR 0x0000000000080000ULL +#define IPG_RFS_RXOVERSIZEDFRAME 0x0000000000100000ULL +#define IPG_RFS_RXLENGTHERROR 0x0000000000200000ULL +#define IPG_RFS_VLANDETECTED 0x0000000000400000ULL +#define IPG_RFS_TCPDETECTED 0x0000000000800000ULL +#define IPG_RFS_TCPERROR 0x0000000001000000ULL +#define IPG_RFS_UDPDETECTED 0x0000000002000000ULL +#define IPG_RFS_UDPERROR 0x0000000004000000ULL +#define IPG_RFS_IPDETECTED 0x0000000008000000ULL +#define IPG_RFS_IPERROR 0x0000000010000000ULL +#define IPG_RFS_FRAMESTART 0x0000000020000000ULL +#define IPG_RFS_FRAMEEND 0x0000000040000000ULL +#define IPG_RFS_RFDDONE 0x0000000080000000ULL +#define IPG_RFS_TCI 0x0000FFFF00000000ULL /* RFDList, FragInfo */ -#define IPG_RFI_RSVD_MASK 0xFFFF00FFFFFFFFFF -#define IPG_RFI_FRAGADDR 0x000000FFFFFFFFFF -#define IPG_RFI_FRAGLEN 0xFFFF000000000000LL +#define IPG_RFI_RSVD_MASK 0xFFFF00FFFFFFFFFFULL +#define IPG_RFI_FRAGADDR 0x000000FFFFFFFFFFULL +#define IPG_RFI_FRAGLEN 0xFFFF000000000000ULL /* I/O Register masks. */ -- cgit v1.2.3 From 3169134478a9638baf0dbb4fdca5a0718cbe8e27 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 15 May 2013 07:06:26 +0000 Subject: fec: Fix inconsistent lock state fec_restart() runs in softirq context and we should use the netif_tx_lock_bh/netif_tx_unlock_bh() variants to avoid the following warning that happens since commit 54309fa6 ("net: fec: fix kernel oops when plug/unplug cable many times"): [ 9.753168] ================================= [ 9.757540] [ INFO: inconsistent lock state ] [ 9.761921] 3.10.0-rc1-next-20130514 #13 Not tainted [ 9.766897] --------------------------------- [ 9.771264] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 9.777288] swapper/0 [HC0[0]:SC1[3]:HE1:SE0] takes: [ 9.782261] (_xmit_ETHER#2){+.?...}, at: [] sch_direct_xmit+0xa0/0x2d4 [ 9.789879] {SOFTIRQ-ON-W} state was registered at: [ 9.794769] [] __lock_acquire+0x528/0x1bc0 [ 9.799953] [] lock_acquire+0xa0/0x108 [ 9.804780] [] _raw_spin_lock+0x28/0x38 [ 9.809702] [] fec_restart+0x5d0/0x664 [ 9.814542] [] fec_enet_adjust_link+0xa8/0xc0 [ 9.819978] [] phy_state_machine+0x2fc/0x370 [ 9.825323] [] process_one_work+0x1c0/0x4a0 [ 9.830589] [] worker_thread+0x138/0x394 [ 9.835587] [] kthread+0xa4/0xb0 [ 9.839890] [] ret_from_fork+0x14/0x34 [ 9.844728] irq event stamp: 185984 [ 9.848226] hardirqs last enabled at (185984): [] local_bh_enable_ip+0x84/0xf0 [ 9.856450] hardirqs last disabled at (185983): [] local_bh_enable_ip+0x44/0xf0 [ 9.864667] softirqs last enabled at (185966): [] irq_enter+0x64/0x68 [ 9.872099] softirqs last disabled at (185967): [] irq_exit+0x9c/0xd8 [ 9.879440] [ 9.879440] other info that might help us debug this: [ 9.885981] Possible unsafe locking scenario: [ 9.885981] [ 9.891912] CPU0 [ 9.894364] ---- [ 9.896814] lock(_xmit_ETHER#2); [ 9.900259] [ 9.902884] lock(_xmit_ETHER#2); [ 9.906500] [ 9.906500] *** DEADLOCK *** Reported-by: Shawn Guo Suggested-by: Eric Dumazet Signed-off-by: Fabio Estevam Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index ca9825ca88c9..658fbc16d8d2 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -451,7 +451,7 @@ fec_restart(struct net_device *ndev, int duplex) netif_device_detach(ndev); napi_disable(&fep->napi); netif_stop_queue(ndev); - netif_tx_lock(ndev); + netif_tx_lock_bh(ndev); } /* Whack a reset. We should wait for this. */ @@ -619,7 +619,7 @@ fec_restart(struct net_device *ndev, int duplex) netif_device_attach(ndev); napi_enable(&fep->napi); netif_wake_queue(ndev); - netif_tx_unlock(ndev); + netif_tx_unlock_bh(ndev); } } -- cgit v1.2.3 From 1ed0d56c1d5ff07a5d57e6467621f9a0c09b0b65 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 15 May 2013 07:06:27 +0000 Subject: fec: Invert the order of function calls in fec_restart() commit 54309fa6 ("net: fec: fix kernel oops when plug/unplug cable many times") introduced the following 'if' block in the beginning of fec_start(): if (netif_running(ndev)) { netif_device_detach(ndev); napi_disable(&fep->napi); netif_stop_queue(ndev); netif_tx_lock_bh(ndev); } Then later in the end of fec_restart() there is another block that calls the opposite of each one of these functions. The correct approach would be to also call them with in the reverse order, so that we have as result: if (netif_running(ndev)) { netif_tx_unlock_bh(ndev); netif_wake_queue(ndev); napi_enable(&fep->napi); netif_device_attach(ndev); } Suggested-by: Eric Dumazet Signed-off-by: Fabio Estevam Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 658fbc16d8d2..570dfad8403a 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -616,10 +616,10 @@ fec_restart(struct net_device *ndev, int duplex) writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK); if (netif_running(ndev)) { - netif_device_attach(ndev); - napi_enable(&fep->napi); - netif_wake_queue(ndev); netif_tx_unlock_bh(ndev); + netif_wake_queue(ndev); + napi_enable(&fep->napi); + netif_device_attach(ndev); } } -- cgit v1.2.3 From 755ccb9d577b95b43537cfeb36da59140412f858 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 15 May 2013 08:00:25 +0000 Subject: broadcom: add include guards to include/linux/brcmphy.h include/linux/brcmphy.h is currently not protected against double inclusion, add ifdefs guard to fix that. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- include/linux/brcmphy.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index b840a4960282..677b4f01b2d0 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -1,3 +1,6 @@ +#ifndef _LINUX_BRCMPHY_H +#define _LINUX_BRCMPHY_H + #define PHY_ID_BCM50610 0x0143bd60 #define PHY_ID_BCM50610M 0x0143bd70 #define PHY_ID_BCM5241 0x0143bc30 @@ -29,3 +32,5 @@ #define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000 #define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000 #define PHY_BCM_FLAGS_VALID 0x80000000 + +#endif /* _LINUX_BRCMPHY_H */ -- cgit v1.2.3 From b1b9fbd0507aac4ddce14f513d52332f50be89dc Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 14 May 2013 12:58:47 +0200 Subject: ALSA: hda - Check the activity of the NID to be powered down When an inactive path is powered down with spec->power_down_unused flag, we should check the activity of each widget in the path whether it's still referred from any active path. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_generic.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index ac079f93c535..ae85bbd2e6f8 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -606,6 +606,10 @@ static bool is_active_nid(struct hda_codec *codec, hda_nid_t nid, return false; } +/* check whether the NID is referred by any active paths */ +#define is_active_nid_for_any(codec, nid) \ + is_active_nid(codec, nid, HDA_OUTPUT, 0) + /* get the default amp value for the target state */ static int get_amp_val_to_activate(struct hda_codec *codec, hda_nid_t nid, int dir, unsigned int caps, bool enable) @@ -759,7 +763,8 @@ static void path_power_down_sync(struct hda_codec *codec, struct nid_path *path) for (i = 0; i < path->depth; i++) { hda_nid_t nid = path->path[i]; - if (!snd_hda_check_power_state(codec, nid, AC_PWRST_D3)) { + if (!snd_hda_check_power_state(codec, nid, AC_PWRST_D3) && + !is_active_nid_for_any(codec, nid)) { snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_POWER_STATE, AC_PWRST_D3); @@ -4157,7 +4162,7 @@ static unsigned int snd_hda_gen_path_power_filter(struct hda_codec *codec, return power_state; if (get_wcaps_type(get_wcaps(codec, nid)) >= AC_WID_POWER) return power_state; - if (is_active_nid(codec, nid, HDA_OUTPUT, 0)) + if (is_active_nid_for_any(codec, nid)) return power_state; return AC_PWRST_D3; } -- cgit v1.2.3 From 088578617d2aaab05ea96b529f16c9a2f1cfbbee Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Mon, 6 May 2013 11:01:05 +1000 Subject: ALSA: snd-aoa: Add a layout entry for PowerBook6,5 Either one or a combination of commits 81e5d86 "Register i2c devices from device-tree" and 3a3dd01 "Improve detection of devices from device-tree" broke sound on PowerBook6,5 machines. Fix it by adding an entry to the new driver to match PowerBook6,5 machines. Signed-off-by: Michael Ellerman Acked-by: Benjamin Herrenschmidt Signed-off-by: Takashi Iwai --- sound/aoa/fabrics/layout.c | 8 ++++++++ sound/aoa/soundbus/i2sbus/core.c | 3 ++- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/sound/aoa/fabrics/layout.c b/sound/aoa/fabrics/layout.c index 552b97afbca5..61ab640e195f 100644 --- a/sound/aoa/fabrics/layout.c +++ b/sound/aoa/fabrics/layout.c @@ -113,6 +113,7 @@ MODULE_ALIAS("sound-layout-100"); MODULE_ALIAS("aoa-device-id-14"); MODULE_ALIAS("aoa-device-id-22"); MODULE_ALIAS("aoa-device-id-35"); +MODULE_ALIAS("aoa-device-id-44"); /* onyx with all but microphone connected */ static struct codec_connection onyx_connections_nomic[] = { @@ -361,6 +362,13 @@ static struct layout layouts[] = { .connections = tas_connections_nolineout, }, }, + /* PowerBook6,5 */ + { .device_id = 44, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_all, + }, + }, /* PowerBook6,7 */ { .layout_id = 80, .codecs[0] = { diff --git a/sound/aoa/soundbus/i2sbus/core.c b/sound/aoa/soundbus/i2sbus/core.c index 010658335881..15e76131b501 100644 --- a/sound/aoa/soundbus/i2sbus/core.c +++ b/sound/aoa/soundbus/i2sbus/core.c @@ -200,7 +200,8 @@ static int i2sbus_add_dev(struct macio_dev *macio, * We probably cannot handle all device-id machines, * so restrict to those we do handle for now. */ - if (id && (*id == 22 || *id == 14 || *id == 35)) { + if (id && (*id == 22 || *id == 14 || *id == 35 || + *id == 44)) { snprintf(dev->sound.modalias, 32, "aoa-device-id-%d", *id); ok = 1; -- cgit v1.2.3 From 436c4a0cfbc4c7a95c4ea37dbd9f697d5dfd553f Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Wed, 15 May 2013 13:56:00 +0200 Subject: ALSA: hda - Add headset mic support for another Dell machine BugLink: https://bugs.launchpad.net/bugs/1180351 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 6bf47f7326ad..59d2e91a9ab6 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3482,6 +3482,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x05c9, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05ca, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05cb, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x05de, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05e9, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05ea, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05eb, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), -- cgit v1.2.3 From f66ba560943ae21f5d1e505bad0a3591823b2b37 Mon Sep 17 00:00:00 2001 From: Luiz Capitulino Date: Wed, 15 May 2013 12:06:26 -0400 Subject: package: Makefile: unbreak binrpm-pkg target Commit 6501320311664e11ad5489fedb17ea1f817c2617 dropped the rpm spec as a prerequisite for the binrpm-pkg target but forgot to update $< usage, which causes the rule to break. This commit fixes that by replacing $< with the spec name. Signed-off-by: Luiz Capitulino Signed-off-by: Michal Marek --- scripts/package/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/package/Makefile b/scripts/package/Makefile index 84a406070f6f..a4f31c900fa6 100644 --- a/scripts/package/Makefile +++ b/scripts/package/Makefile @@ -63,7 +63,7 @@ binrpm-pkg: FORCE mv -f $(objtree)/.tmp_version $(objtree)/.version $(RPM) $(RPMOPTS) --define "_builddir $(objtree)" --target \ - $(UTS_MACHINE) -bb $< + $(UTS_MACHINE) -bb $(objtree)/binkernel.spec rm binkernel.spec # Deb target -- cgit v1.2.3 From c972c1280387e7015790d251160039ea2077e430 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Wed, 17 Apr 2013 14:28:47 -0700 Subject: mfd: tps65912: Select MFD_CORE CONFIG_MFD_CORE must be selected for TPS65912 to properly buid. Otherwise it results in a link error: drivers/built-in.o: In function `tps65912_device_init': (.text+0x587e4): undefined reference to `mfd_add_devices' drivers/built-in.o: In function `tps65912_device_init': (.text+0x5884c): undefined reference to `mfd_remove_devices' drivers/built-in.o: In function `tps65912_device_exit': (.text+0x58878): undefined reference to `mfd_remove_devices' Signed-off-by: David Rientjes Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index d9aed1593e5d..5ea1f8ca8648 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -818,6 +818,7 @@ config MFD_TPS65910 config MFD_TPS65912 bool "TI TPS65912 Power Management chip" depends on GPIOLIB + select MFD_CORE help If you say yes here you get support for the TPS65912 series of PM chips. -- cgit v1.2.3 From abfdbd53a4e28844ad953b313f017f55edbb85b7 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 15 May 2013 11:28:54 -0700 Subject: SUNRPC: Faster detection if gssd is actually running Recent changes to the NFS security flavour negotiation mean that we have a stronger dependency on rpc.gssd. If the latter is not running, because the user failed to start it, then we time out and mark the container as not having an instance. We then use that information to time out faster the next time. If, on the other hand, the rpc.gssd successfully binds to an rpc_pipe, then we mark the container as having an rpc.gssd instance. Signed-off-by: Trond Myklebust --- net/sunrpc/auth_gss/auth_gss.c | 13 ++++++++++++- net/sunrpc/netns.h | 2 ++ net/sunrpc/rpc_pipe.c | 4 ++++ 3 files changed, 18 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index f17f3c581ff4..3aff72f78bf2 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -52,6 +52,8 @@ #include #include +#include "../netns.h" + static const struct rpc_authops authgss_ops; static const struct rpc_credops gss_credops; @@ -559,9 +561,12 @@ out: static inline int gss_create_upcall(struct gss_auth *gss_auth, struct gss_cred *gss_cred) { + struct net *net = rpc_net_ns(gss_auth->client); + struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); struct rpc_pipe *pipe; struct rpc_cred *cred = &gss_cred->gc_base; struct gss_upcall_msg *gss_msg; + unsigned long timeout; DEFINE_WAIT(wait); int err; @@ -569,11 +574,17 @@ gss_create_upcall(struct gss_auth *gss_auth, struct gss_cred *gss_cred) __func__, from_kuid(&init_user_ns, cred->cr_uid)); retry: err = 0; + /* Default timeout is 15s unless we know that gssd is not running */ + timeout = 15 * HZ; + if (!sn->gssd_running) + timeout = HZ >> 2; gss_msg = gss_setup_upcall(gss_auth->client, gss_auth, cred); if (PTR_ERR(gss_msg) == -EAGAIN) { err = wait_event_interruptible_timeout(pipe_version_waitqueue, - pipe_version >= 0, 15*HZ); + pipe_version >= 0, timeout); if (pipe_version < 0) { + if (err == 0) + sn->gssd_running = 0; warn_gssd(); err = -EACCES; } diff --git a/net/sunrpc/netns.h b/net/sunrpc/netns.h index 7111a4c9113b..0827f641e8d7 100644 --- a/net/sunrpc/netns.h +++ b/net/sunrpc/netns.h @@ -29,6 +29,8 @@ struct sunrpc_net { struct rpc_clnt *gssp_clnt; int use_gss_proxy; struct proc_dir_entry *use_gssp_proc; + + unsigned int gssd_running; }; extern int sunrpc_net_id; diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index a9129f8d7070..a370762e459d 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -216,11 +216,14 @@ rpc_destroy_inode(struct inode *inode) static int rpc_pipe_open(struct inode *inode, struct file *filp) { + struct net *net = inode->i_sb->s_fs_info; + struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); struct rpc_pipe *pipe; int first_open; int res = -ENXIO; mutex_lock(&inode->i_mutex); + sn->gssd_running = 1; pipe = RPC_I(inode)->pipe; if (pipe == NULL) goto out; @@ -1069,6 +1072,7 @@ void rpc_pipefs_init_net(struct net *net) struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); mutex_init(&sn->pipefs_sb_lock); + sn->gssd_running = 1; } /* -- cgit v1.2.3 From 2aed8b476f3478be140df92bbfb182978e835504 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 15 May 2013 10:27:32 -0700 Subject: SUNRPC: Convert auth_gss pipe detection to work in namespaces This seems to have been overlooked when we did the namespace conversion. If a container is running a legacy version of rpc.gssd then it will be disrupted if the global 'pipe_version' is set by a container running the new version of rpc.gssd. Signed-off-by: Trond Myklebust --- net/sunrpc/auth_gss/auth_gss.c | 46 +++++++++++++++++++++++++----------------- net/sunrpc/netns.h | 2 ++ net/sunrpc/rpc_pipe.c | 1 + 3 files changed, 30 insertions(+), 19 deletions(-) diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 3aff72f78bf2..fc2f78d6a9b4 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -87,8 +87,6 @@ struct gss_auth { }; /* pipe_version >= 0 if and only if someone has a pipe open. */ -static int pipe_version = -1; -static atomic_t pipe_users = ATOMIC_INIT(0); static DEFINE_SPINLOCK(pipe_version_lock); static struct rpc_wait_queue pipe_version_rpc_waitqueue; static DECLARE_WAIT_QUEUE_HEAD(pipe_version_waitqueue); @@ -268,24 +266,27 @@ struct gss_upcall_msg { char databuf[UPCALL_BUF_LEN]; }; -static int get_pipe_version(void) +static int get_pipe_version(struct net *net) { + struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); int ret; spin_lock(&pipe_version_lock); - if (pipe_version >= 0) { - atomic_inc(&pipe_users); - ret = pipe_version; + if (sn->pipe_version >= 0) { + atomic_inc(&sn->pipe_users); + ret = sn->pipe_version; } else ret = -EAGAIN; spin_unlock(&pipe_version_lock); return ret; } -static void put_pipe_version(void) +static void put_pipe_version(struct net *net) { - if (atomic_dec_and_lock(&pipe_users, &pipe_version_lock)) { - pipe_version = -1; + struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); + + if (atomic_dec_and_lock(&sn->pipe_users, &pipe_version_lock)) { + sn->pipe_version = -1; spin_unlock(&pipe_version_lock); } } @@ -293,9 +294,10 @@ static void put_pipe_version(void) static void gss_release_msg(struct gss_upcall_msg *gss_msg) { + struct net *net = rpc_net_ns(gss_msg->auth->client); if (!atomic_dec_and_test(&gss_msg->count)) return; - put_pipe_version(); + put_pipe_version(net); BUG_ON(!list_empty(&gss_msg->list)); if (gss_msg->ctx != NULL) gss_put_ctx(gss_msg->ctx); @@ -441,7 +443,10 @@ static void gss_encode_msg(struct gss_upcall_msg *gss_msg, struct rpc_clnt *clnt, const char *service_name) { - if (pipe_version == 0) + struct net *net = rpc_net_ns(clnt); + struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); + + if (sn->pipe_version == 0) gss_encode_v0_msg(gss_msg); else /* pipe_version == 1 */ gss_encode_v1_msg(gss_msg, clnt, service_name); @@ -457,7 +462,7 @@ gss_alloc_msg(struct gss_auth *gss_auth, struct rpc_clnt *clnt, gss_msg = kzalloc(sizeof(*gss_msg), GFP_NOFS); if (gss_msg == NULL) return ERR_PTR(-ENOMEM); - vers = get_pipe_version(); + vers = get_pipe_version(rpc_net_ns(clnt)); if (vers < 0) { kfree(gss_msg); return ERR_PTR(vers); @@ -581,8 +586,8 @@ retry: gss_msg = gss_setup_upcall(gss_auth->client, gss_auth, cred); if (PTR_ERR(gss_msg) == -EAGAIN) { err = wait_event_interruptible_timeout(pipe_version_waitqueue, - pipe_version >= 0, timeout); - if (pipe_version < 0) { + sn->pipe_version >= 0, timeout); + if (sn->pipe_version < 0) { if (err == 0) sn->gssd_running = 0; warn_gssd(); @@ -719,20 +724,22 @@ out: static int gss_pipe_open(struct inode *inode, int new_version) { + struct net *net = inode->i_sb->s_fs_info; + struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); int ret = 0; spin_lock(&pipe_version_lock); - if (pipe_version < 0) { + if (sn->pipe_version < 0) { /* First open of any gss pipe determines the version: */ - pipe_version = new_version; + sn->pipe_version = new_version; rpc_wake_up(&pipe_version_rpc_waitqueue); wake_up(&pipe_version_waitqueue); - } else if (pipe_version != new_version) { + } else if (sn->pipe_version != new_version) { /* Trying to open a pipe of a different version */ ret = -EBUSY; goto out; } - atomic_inc(&pipe_users); + atomic_inc(&sn->pipe_users); out: spin_unlock(&pipe_version_lock); return ret; @@ -752,6 +759,7 @@ static int gss_pipe_open_v1(struct inode *inode) static void gss_pipe_release(struct inode *inode) { + struct net *net = inode->i_sb->s_fs_info; struct rpc_pipe *pipe = RPC_I(inode)->pipe; struct gss_upcall_msg *gss_msg; @@ -770,7 +778,7 @@ restart: } spin_unlock(&pipe->lock); - put_pipe_version(); + put_pipe_version(net); } static void diff --git a/net/sunrpc/netns.h b/net/sunrpc/netns.h index 0827f641e8d7..74d948f5d5a1 100644 --- a/net/sunrpc/netns.h +++ b/net/sunrpc/netns.h @@ -28,6 +28,8 @@ struct sunrpc_net { wait_queue_head_t gssp_wq; struct rpc_clnt *gssp_clnt; int use_gss_proxy; + int pipe_version; + atomic_t pipe_users; struct proc_dir_entry *use_gssp_proc; unsigned int gssd_running; diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index a370762e459d..e7ce4b3eb0bd 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -1073,6 +1073,7 @@ void rpc_pipefs_init_net(struct net *net) mutex_init(&sn->pipefs_sb_lock); sn->gssd_running = 1; + sn->pipe_version = -1; } /* -- cgit v1.2.3 From 6ed0106667d76589cb648c27edb4f4ffbf9d59ca Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 16 May 2013 20:48:49 +0900 Subject: tracing: Return -EBUSY when event_enable_func() fails to get module Since try_module_get() returns false( = 0) when it fails to pindown a module, event_enable_func() returns 0 which means "succeed". This can cause a kernel panic when the entry is removed, because the event is already released. This fixes the bug by returning -EBUSY, because the reason why it fails is that the module is being removed at that time. Link: http://lkml.kernel.org/r/20130516114848.13508.97899.stgit@mhiramat-M0-7522 Cc: Srikar Dronamraju Cc: Oleg Nesterov Cc: Tom Zanussi Cc: Frederic Weisbecker Cc: Ingo Molnar Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt --- kernel/trace/trace_events.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c index 7a0cf68027cc..27963e2bf4bf 100644 --- a/kernel/trace/trace_events.c +++ b/kernel/trace/trace_events.c @@ -2072,8 +2072,10 @@ event_enable_func(struct ftrace_hash *hash, out_reg: /* Don't let event modules unload while probe registered */ ret = try_module_get(file->event_call->mod); - if (!ret) + if (!ret) { + ret = -EBUSY; goto out_free; + } ret = __ftrace_event_enable_disable(file, 1, 1); if (ret < 0) -- cgit v1.2.3 From 304e71e0ad4125c29a0731491b75c3b83530d616 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 14 May 2013 20:28:15 -0700 Subject: ARM: dts: Fix musb interrupt for device tree booting Commit ad871c10 (ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards) added support for MUSB on omap3 for device tree, but added the interrupts the wrong way probably as they were copied from the omap4.dtsi file. On omap3 we have TI specific interrupt controller, not GIC. Fix this by specifying the interrupt following the TI INTC binding. Without this fix MUSB won't work as it is trying to use irq0 instead of irq92. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 82a404da1c0d..99ba6e14ebf3 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -516,7 +516,7 @@ usb_otg_hs: usb_otg_hs@480ab000 { compatible = "ti,omap3-musb"; reg = <0x480ab000 0x1000>; - interrupts = <0 92 0x4>, <0 93 0x4>; + interrupts = <92>, <93>; interrupt-names = "mc", "dma"; ti,hwmods = "usb_otg_hs"; multipoint = <1>; -- cgit v1.2.3 From bc6bcb59dd7c184d229f9e86d08aa56059938a4c Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 7 May 2013 03:22:18 +0200 Subject: netfilter: xt_TCPOPTSTRIP: fix possible mangling beyond packet boundary This target assumes that tcph->doff is well-formed, that may be well not the case. Add extra sanity checkings to avoid possible crash due to read/write out of the real packet boundary. After this patch, the default action on malformed TCP packets is to drop them. Moreover, fragments are skipped. Reported-by: Rafal Kupka Signed-off-by: Pablo Neira Ayuso --- net/netfilter/xt_TCPOPTSTRIP.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/net/netfilter/xt_TCPOPTSTRIP.c b/net/netfilter/xt_TCPOPTSTRIP.c index 25fd1c4e1eec..1eb1a44bfd3d 100644 --- a/net/netfilter/xt_TCPOPTSTRIP.c +++ b/net/netfilter/xt_TCPOPTSTRIP.c @@ -30,17 +30,28 @@ static inline unsigned int optlen(const u_int8_t *opt, unsigned int offset) static unsigned int tcpoptstrip_mangle_packet(struct sk_buff *skb, - const struct xt_tcpoptstrip_target_info *info, + const struct xt_action_param *par, unsigned int tcphoff, unsigned int minlen) { + const struct xt_tcpoptstrip_target_info *info = par->targinfo; unsigned int optl, i, j; struct tcphdr *tcph; u_int16_t n, o; u_int8_t *opt; + int len; + + /* This is a fragment, no TCP header is available */ + if (par->fragoff != 0) + return XT_CONTINUE; if (!skb_make_writable(skb, skb->len)) return NF_DROP; + len = skb->len - tcphoff; + if (len < (int)sizeof(struct tcphdr) || + tcp_hdr(skb)->doff * 4 > len) + return NF_DROP; + tcph = (struct tcphdr *)(skb_network_header(skb) + tcphoff); opt = (u_int8_t *)tcph; @@ -76,7 +87,7 @@ tcpoptstrip_mangle_packet(struct sk_buff *skb, static unsigned int tcpoptstrip_tg4(struct sk_buff *skb, const struct xt_action_param *par) { - return tcpoptstrip_mangle_packet(skb, par->targinfo, ip_hdrlen(skb), + return tcpoptstrip_mangle_packet(skb, par, ip_hdrlen(skb), sizeof(struct iphdr) + sizeof(struct tcphdr)); } @@ -94,7 +105,7 @@ tcpoptstrip_tg6(struct sk_buff *skb, const struct xt_action_param *par) if (tcphoff < 0) return NF_DROP; - return tcpoptstrip_mangle_packet(skb, par->targinfo, tcphoff, + return tcpoptstrip_mangle_packet(skb, par, tcphoff, sizeof(*ipv6h) + sizeof(struct tcphdr)); } #endif -- cgit v1.2.3 From b0222afa5bab555c378d2ab82b32078c9e942b3a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 8 May 2013 22:23:42 +0200 Subject: mfd: si476x: Do not use binary constants Gcc < 4.3 doesn't understand binary constanrs (0b*): drivers/mfd/si476x-cmd.c:153:22: error: invalid suffix "b11111" on integer constant drivers/mfd/si476x-cmd.c:775:20: error: invalid suffix "b00001000" on integer constant drivers/mfd/si476x-cmd.c:776:20: error: invalid suffix "b00000100" on integer constant drivers/mfd/si476x-cmd.c:777:21: error: invalid suffix "b00000010" on integer constant drivers/mfd/si476x-cmd.c:778:21: error: invalid suffix "b00000001" on integer constant drivers/mfd/si476x-cmd.c:780:17: error: invalid suffix "b10000000" on integer constant drivers/mfd/si476x-cmd.c:781:22: error: invalid suffix "b00100000" on integer constant ... Hence use hexadecimal constants (0x*) instead. Signed-off-by: Geert Uytterhoeven Acked-by: Andrey Smirnov Signed-off-by: Samuel Ortiz --- drivers/mfd/si476x-cmd.c | 122 +++++++++++++++++++++++------------------------ 1 file changed, 61 insertions(+), 61 deletions(-) diff --git a/drivers/mfd/si476x-cmd.c b/drivers/mfd/si476x-cmd.c index de48b4e88450..f12f0163feff 100644 --- a/drivers/mfd/si476x-cmd.c +++ b/drivers/mfd/si476x-cmd.c @@ -150,7 +150,7 @@ enum si476x_acf_status_report_bits { SI476X_ACF_SOFTMUTE_INT = (1 << 0), SI476X_ACF_SMUTE = (1 << 0), - SI476X_ACF_SMATTN = 0b11111, + SI476X_ACF_SMATTN = 0x1f, SI476X_ACF_PILOT = (1 << 7), SI476X_ACF_STBLEND = ~SI476X_ACF_PILOT, }; @@ -772,16 +772,16 @@ int si476x_core_cmd_am_rsq_status(struct si476x_core *core, if (!report) return err; - report->snrhint = 0b00001000 & resp[1]; - report->snrlint = 0b00000100 & resp[1]; - report->rssihint = 0b00000010 & resp[1]; - report->rssilint = 0b00000001 & resp[1]; + report->snrhint = 0x08 & resp[1]; + report->snrlint = 0x04 & resp[1]; + report->rssihint = 0x02 & resp[1]; + report->rssilint = 0x01 & resp[1]; - report->bltf = 0b10000000 & resp[2]; - report->snr_ready = 0b00100000 & resp[2]; - report->rssiready = 0b00001000 & resp[2]; - report->afcrl = 0b00000010 & resp[2]; - report->valid = 0b00000001 & resp[2]; + report->bltf = 0x80 & resp[2]; + report->snr_ready = 0x20 & resp[2]; + report->rssiready = 0x08 & resp[2]; + report->afcrl = 0x02 & resp[2]; + report->valid = 0x01 & resp[2]; report->readfreq = be16_to_cpup((__be16 *)(resp + 3)); report->freqoff = resp[5]; @@ -931,26 +931,26 @@ int si476x_core_cmd_fm_rds_status(struct si476x_core *core, if (err < 0 || report == NULL) return err; - report->rdstpptyint = 0b00010000 & resp[1]; - report->rdspiint = 0b00001000 & resp[1]; - report->rdssyncint = 0b00000010 & resp[1]; - report->rdsfifoint = 0b00000001 & resp[1]; + report->rdstpptyint = 0x10 & resp[1]; + report->rdspiint = 0x08 & resp[1]; + report->rdssyncint = 0x02 & resp[1]; + report->rdsfifoint = 0x01 & resp[1]; - report->tpptyvalid = 0b00010000 & resp[2]; - report->pivalid = 0b00001000 & resp[2]; - report->rdssync = 0b00000010 & resp[2]; - report->rdsfifolost = 0b00000001 & resp[2]; + report->tpptyvalid = 0x10 & resp[2]; + report->pivalid = 0x08 & resp[2]; + report->rdssync = 0x02 & resp[2]; + report->rdsfifolost = 0x01 & resp[2]; - report->tp = 0b00100000 & resp[3]; - report->pty = 0b00011111 & resp[3]; + report->tp = 0x20 & resp[3]; + report->pty = 0x1f & resp[3]; report->pi = be16_to_cpup((__be16 *)(resp + 4)); report->rdsfifoused = resp[6]; - report->ble[V4L2_RDS_BLOCK_A] = 0b11000000 & resp[7]; - report->ble[V4L2_RDS_BLOCK_B] = 0b00110000 & resp[7]; - report->ble[V4L2_RDS_BLOCK_C] = 0b00001100 & resp[7]; - report->ble[V4L2_RDS_BLOCK_D] = 0b00000011 & resp[7]; + report->ble[V4L2_RDS_BLOCK_A] = 0xc0 & resp[7]; + report->ble[V4L2_RDS_BLOCK_B] = 0x30 & resp[7]; + report->ble[V4L2_RDS_BLOCK_C] = 0x0c & resp[7]; + report->ble[V4L2_RDS_BLOCK_D] = 0x03 & resp[7]; report->rds[V4L2_RDS_BLOCK_A].block = V4L2_RDS_BLOCK_A; report->rds[V4L2_RDS_BLOCK_A].msb = resp[8]; @@ -1005,7 +1005,7 @@ int si476x_core_cmd_fm_phase_diversity(struct si476x_core *core, { u8 resp[CMD_FM_PHASE_DIVERSITY_NRESP]; const u8 args[CMD_FM_PHASE_DIVERSITY_NARGS] = { - mode & 0b111, + mode & 0x07, }; return si476x_core_send_command(core, CMD_FM_PHASE_DIVERSITY, @@ -1162,7 +1162,7 @@ static int si476x_core_cmd_am_tune_freq_a20(struct si476x_core *core, const int am_freq = tuneargs->freq; u8 resp[CMD_AM_TUNE_FREQ_NRESP]; const u8 args[CMD_AM_TUNE_FREQ_NARGS] = { - (tuneargs->zifsr << 6) | (tuneargs->injside & 0b11), + (tuneargs->zifsr << 6) | (tuneargs->injside & 0x03), msb(am_freq), lsb(am_freq), }; @@ -1197,18 +1197,18 @@ static int si476x_core_cmd_fm_rsq_status_a10(struct si476x_core *core, if (err < 0 || report == NULL) return err; - report->multhint = 0b10000000 & resp[1]; - report->multlint = 0b01000000 & resp[1]; - report->snrhint = 0b00001000 & resp[1]; - report->snrlint = 0b00000100 & resp[1]; - report->rssihint = 0b00000010 & resp[1]; - report->rssilint = 0b00000001 & resp[1]; + report->multhint = 0x80 & resp[1]; + report->multlint = 0x40 & resp[1]; + report->snrhint = 0x08 & resp[1]; + report->snrlint = 0x04 & resp[1]; + report->rssihint = 0x02 & resp[1]; + report->rssilint = 0x01 & resp[1]; - report->bltf = 0b10000000 & resp[2]; - report->snr_ready = 0b00100000 & resp[2]; - report->rssiready = 0b00001000 & resp[2]; - report->afcrl = 0b00000010 & resp[2]; - report->valid = 0b00000001 & resp[2]; + report->bltf = 0x80 & resp[2]; + report->snr_ready = 0x20 & resp[2]; + report->rssiready = 0x08 & resp[2]; + report->afcrl = 0x02 & resp[2]; + report->valid = 0x01 & resp[2]; report->readfreq = be16_to_cpup((__be16 *)(resp + 3)); report->freqoff = resp[5]; @@ -1251,18 +1251,18 @@ static int si476x_core_cmd_fm_rsq_status_a20(struct si476x_core *core, if (err < 0 || report == NULL) return err; - report->multhint = 0b10000000 & resp[1]; - report->multlint = 0b01000000 & resp[1]; - report->snrhint = 0b00001000 & resp[1]; - report->snrlint = 0b00000100 & resp[1]; - report->rssihint = 0b00000010 & resp[1]; - report->rssilint = 0b00000001 & resp[1]; + report->multhint = 0x80 & resp[1]; + report->multlint = 0x40 & resp[1]; + report->snrhint = 0x08 & resp[1]; + report->snrlint = 0x04 & resp[1]; + report->rssihint = 0x02 & resp[1]; + report->rssilint = 0x01 & resp[1]; - report->bltf = 0b10000000 & resp[2]; - report->snr_ready = 0b00100000 & resp[2]; - report->rssiready = 0b00001000 & resp[2]; - report->afcrl = 0b00000010 & resp[2]; - report->valid = 0b00000001 & resp[2]; + report->bltf = 0x80 & resp[2]; + report->snr_ready = 0x20 & resp[2]; + report->rssiready = 0x08 & resp[2]; + report->afcrl = 0x02 & resp[2]; + report->valid = 0x01 & resp[2]; report->readfreq = be16_to_cpup((__be16 *)(resp + 3)); report->freqoff = resp[5]; @@ -1306,19 +1306,19 @@ static int si476x_core_cmd_fm_rsq_status_a30(struct si476x_core *core, if (err < 0 || report == NULL) return err; - report->multhint = 0b10000000 & resp[1]; - report->multlint = 0b01000000 & resp[1]; - report->snrhint = 0b00001000 & resp[1]; - report->snrlint = 0b00000100 & resp[1]; - report->rssihint = 0b00000010 & resp[1]; - report->rssilint = 0b00000001 & resp[1]; - - report->bltf = 0b10000000 & resp[2]; - report->snr_ready = 0b00100000 & resp[2]; - report->rssiready = 0b00001000 & resp[2]; - report->injside = 0b00000100 & resp[2]; - report->afcrl = 0b00000010 & resp[2]; - report->valid = 0b00000001 & resp[2]; + report->multhint = 0x80 & resp[1]; + report->multlint = 0x40 & resp[1]; + report->snrhint = 0x08 & resp[1]; + report->snrlint = 0x04 & resp[1]; + report->rssihint = 0x02 & resp[1]; + report->rssilint = 0x01 & resp[1]; + + report->bltf = 0x80 & resp[2]; + report->snr_ready = 0x20 & resp[2]; + report->rssiready = 0x08 & resp[2]; + report->injside = 0x04 & resp[2]; + report->afcrl = 0x02 & resp[2]; + report->valid = 0x01 & resp[2]; report->readfreq = be16_to_cpup((__be16 *)(resp + 3)); report->freqoff = resp[5]; -- cgit v1.2.3 From c34924b9503ca73ae36573d6ce08a34677c05081 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 8 May 2013 23:37:45 +0200 Subject: mfd: cros_ec_spi: Use %z to format pointer differences MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Before commit 5c29e47e6ac55b63c76999eb5b283a80208726c5 ("mfd: cros_ec_spi: Warnings fix"), 64-bit compiles gave the following warnings: drivers/mfd/cros_ec_spi.c: In function 'cros_ec_spi_receive_response': drivers/mfd/cros_ec_spi.c:123:5: warning: format '%d' expects argument of type 'int', but argument 4 has type 'long int' [-Wformat] drivers/mfd/cros_ec_spi.c:157:3: warning: format '%d' expects argument of type 'int', but argument 6 has type 'long int' [-Wformat] drivers/mfd/cros_ec_spi.c:181:2: warning: format '%d' expects argument of type 'int', but argument 4 has type 'long int' [-Wformat] After that commit, 32-bit compiles give: drivers/mfd/cros_ec_spi.c: In function ‘cros_ec_spi_receive_response’: drivers/mfd/cros_ec_spi.c:123: warning: format ‘%ld’ expects type ‘long int’, but argument 4 has type ‘int’ drivers/mfd/cros_ec_spi.c:157: warning: format ‘%ld’ expects type ‘long int’, but argument 6 has type ‘int’ drivers/mfd/cros_ec_spi.c:181: warning: format ‘%ld’ expects type ‘long int’, but argument 4 has type ‘int’ Use %z to format pointer differences to kill the warnings on both 32-bit and 64-bit. Signed-off-by: Geert Uytterhoeven Signed-off-by: Samuel Ortiz --- drivers/mfd/cros_ec_spi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c index 19193cf1e7a1..367ccb58ecb1 100644 --- a/drivers/mfd/cros_ec_spi.c +++ b/drivers/mfd/cros_ec_spi.c @@ -120,7 +120,7 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev, for (end = ptr + EC_MSG_PREAMBLE_COUNT; ptr != end; ptr++) { if (*ptr == EC_MSG_HEADER) { - dev_dbg(ec_dev->dev, "msg found at %ld\n", + dev_dbg(ec_dev->dev, "msg found at %zd\n", ptr - ec_dev->din); break; } @@ -154,7 +154,7 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev, * maximum-supported transfer size. */ todo = min(need_len, 256); - dev_dbg(ec_dev->dev, "loop, todo=%d, need_len=%d, ptr=%ld\n", + dev_dbg(ec_dev->dev, "loop, todo=%d, need_len=%d, ptr=%zd\n", todo, need_len, ptr - ec_dev->din); memset(&trans, '\0', sizeof(trans)); @@ -178,7 +178,7 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev, need_len -= todo; } - dev_dbg(ec_dev->dev, "loop done, ptr=%ld\n", ptr - ec_dev->din); + dev_dbg(ec_dev->dev, "loop done, ptr=%zd\n", ptr - ec_dev->din); return 0; } -- cgit v1.2.3 From 151978bf671dd2f741eab79c91d7d74bad49929c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 May 2013 14:01:05 +0200 Subject: mfd: si476x: Use get_unaligned_be16() for unaligned be16 loads Loading be16 values from byte buffers may cause unaligned accesses, so use get_unaligned_be16() to avoid problems on architectures that do not support these. Signed-off-by: Geert Uytterhoeven Acked-by: Andrey Smirnov Signed-off-by: Samuel Ortiz --- drivers/mfd/si476x-cmd.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/drivers/mfd/si476x-cmd.c b/drivers/mfd/si476x-cmd.c index f12f0163feff..6f1ef63086c9 100644 --- a/drivers/mfd/si476x-cmd.c +++ b/drivers/mfd/si476x-cmd.c @@ -29,6 +29,8 @@ #include +#include + #define msb(x) ((u8)((u16) x >> 8)) #define lsb(x) ((u8)((u16) x & 0x00FF)) @@ -483,7 +485,7 @@ int si476x_core_cmd_get_property(struct si476x_core *core, u16 property) if (err < 0) return err; else - return be16_to_cpup((__be16 *)(resp + 2)); + return get_unaligned_be16(resp + 2); } EXPORT_SYMBOL_GPL(si476x_core_cmd_get_property); @@ -783,7 +785,7 @@ int si476x_core_cmd_am_rsq_status(struct si476x_core *core, report->afcrl = 0x02 & resp[2]; report->valid = 0x01 & resp[2]; - report->readfreq = be16_to_cpup((__be16 *)(resp + 3)); + report->readfreq = get_unaligned_be16(resp + 3); report->freqoff = resp[5]; report->rssi = resp[6]; report->snr = resp[7]; @@ -944,7 +946,7 @@ int si476x_core_cmd_fm_rds_status(struct si476x_core *core, report->tp = 0x20 & resp[3]; report->pty = 0x1f & resp[3]; - report->pi = be16_to_cpup((__be16 *)(resp + 4)); + report->pi = get_unaligned_be16(resp + 4); report->rdsfifoused = resp[6]; report->ble[V4L2_RDS_BLOCK_A] = 0xc0 & resp[7]; @@ -991,9 +993,9 @@ int si476x_core_cmd_fm_rds_blockcount(struct si476x_core *core, SI476X_DEFAULT_TIMEOUT); if (!err) { - report->expected = be16_to_cpup((__be16 *)(resp + 2)); - report->received = be16_to_cpup((__be16 *)(resp + 4)); - report->uncorrectable = be16_to_cpup((__be16 *)(resp + 6)); + report->expected = get_unaligned_be16(resp + 2); + report->received = get_unaligned_be16(resp + 4); + report->uncorrectable = get_unaligned_be16(resp + 6); } return err; @@ -1210,7 +1212,7 @@ static int si476x_core_cmd_fm_rsq_status_a10(struct si476x_core *core, report->afcrl = 0x02 & resp[2]; report->valid = 0x01 & resp[2]; - report->readfreq = be16_to_cpup((__be16 *)(resp + 3)); + report->readfreq = get_unaligned_be16(resp + 3); report->freqoff = resp[5]; report->rssi = resp[6]; report->snr = resp[7]; @@ -1218,7 +1220,7 @@ static int si476x_core_cmd_fm_rsq_status_a10(struct si476x_core *core, report->hassi = resp[10]; report->mult = resp[11]; report->dev = resp[12]; - report->readantcap = be16_to_cpup((__be16 *)(resp + 13)); + report->readantcap = get_unaligned_be16(resp + 13); report->assi = resp[15]; report->usn = resp[16]; @@ -1264,7 +1266,7 @@ static int si476x_core_cmd_fm_rsq_status_a20(struct si476x_core *core, report->afcrl = 0x02 & resp[2]; report->valid = 0x01 & resp[2]; - report->readfreq = be16_to_cpup((__be16 *)(resp + 3)); + report->readfreq = get_unaligned_be16(resp + 3); report->freqoff = resp[5]; report->rssi = resp[6]; report->snr = resp[7]; @@ -1272,7 +1274,7 @@ static int si476x_core_cmd_fm_rsq_status_a20(struct si476x_core *core, report->hassi = resp[10]; report->mult = resp[11]; report->dev = resp[12]; - report->readantcap = be16_to_cpup((__be16 *)(resp + 13)); + report->readantcap = get_unaligned_be16(resp + 13); report->assi = resp[15]; report->usn = resp[16]; @@ -1320,7 +1322,7 @@ static int si476x_core_cmd_fm_rsq_status_a30(struct si476x_core *core, report->afcrl = 0x02 & resp[2]; report->valid = 0x01 & resp[2]; - report->readfreq = be16_to_cpup((__be16 *)(resp + 3)); + report->readfreq = get_unaligned_be16(resp + 3); report->freqoff = resp[5]; report->rssi = resp[6]; report->snr = resp[7]; @@ -1329,7 +1331,7 @@ static int si476x_core_cmd_fm_rsq_status_a30(struct si476x_core *core, report->hassi = resp[10]; report->mult = resp[11]; report->dev = resp[12]; - report->readantcap = be16_to_cpup((__be16 *)(resp + 13)); + report->readantcap = get_unaligned_be16(resp + 13); report->assi = resp[15]; report->usn = resp[16]; @@ -1337,7 +1339,7 @@ static int si476x_core_cmd_fm_rsq_status_a30(struct si476x_core *core, report->rdsdev = resp[18]; report->assidev = resp[19]; report->strongdev = resp[20]; - report->rdspi = be16_to_cpup((__be16 *)(resp + 21)); + report->rdspi = get_unaligned_be16(resp + 21); return err; } -- cgit v1.2.3 From 0f497039276fa2ca2ca324236848bb15c8c775dc Mon Sep 17 00:00:00 2001 From: jean-philippe francois Date: Thu, 16 May 2013 11:25:07 -0700 Subject: ARM: OMAP: fix __init section mismatch for _enable_preprogram _enable_preprogram is marked as __init, but is called from _enable which is not. Without this patch, the board oopses after init. Tested on custom hardware and on beagle board xM. Otherwise we can get: Unable to handle kernel paging request at virtual address 000b0012 pgd = cf968000 *pgd=8fb06831, *pte=00000000, *ppte=00000000 PREEMPT ARM Modules linked in: CPU: 0 Not tainted (3.9.0 #2) PC is at _enable_preprogram+0x1c/0x24 LR is at omap_hwmod_enable+0x34/0x60 psr: 80000093 sp : cf95de08 ip : 00002de5 fp : bec33d4c r10: 00000000 r9 : 00000002 r8 : b6dd2c78 r7 : 00000004 r6 : 00000000 r5 : a0000013 r4 : cf95c000 r3 : 00000000 r2 : b6dd2c7c r1 : 00000000 r0 : 000b0012 Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 8f968019 DAC: 00000015 Process otpcmd (pid: 607, stack limit = 0xcf95c230) Stack: (0xcf95de08 to 0xcf95e000) de00: 00000001 cf91f840 00000000 c001d6fc 00000002 cf91f840 de20: cf8f7e10 c001de54 cf8f7e10 c001de78 c001de68 c01d5e80 00000000 cf8f7e10 de40: cf8f7e10 c01d5f28 cf8f7e10 c0530d30 00000000 c01d6f28 00000000 c0088664 de60: b6ea1000 cfb05284 cf95c000 00000001 cf95c000 60000013 00000001 cf95dee4 de80: cf870050 c01d7308 cf870010 cf870050 00000001 c0278b14 c0526f28 00000000 dea0: cf870050 ffff8e18 00000001 cf95dee4 00000000 c0274f7c cf870050 00000001 dec0: cf95dee4 cf1d8484 000000e0 c0276464 00000008 cf9c0000 00000007 c0276980 dee0: cf9c0000 00000064 00000008 cf1d8404 cf1d8400 c01cc05c 0000270a cf1d8504 df00: 00000023 cf1d8484 00000007 c01cc670 00000bdd 00000001 00000000 cf449e60 df20: cf1dde70 cf1d8400 bec33d18 cf1d8504 c0246f00 00000003 cf95c000 00000000 df40: bec33d4c c01cd078 00000003 cf1d8504 00000081 c01cbcb8 bec33d18 00000003 df60: bec33d18 c00a9034 00002000 c00a9c68 cf92fe00 00000003 c0246f00 cf92fe00 df80: 00000000 c00a9cb0 00000003 00000000 00008e70 00000000 b6f17000 00000036 dfa0: c000e484 c000e300 00008e70 00000000 00000003 c0246f00 bec33d18 bec33d18 dfc0: 00008e70 00000000 b6f17000 00000036 00000000 00000000 b6f6d000 bec33d4c dfe0: b6ea1bd0 bec33d0c 00008c9c b6ea1bdc 60000010 00000003 00000000 00000000 (_omap_device_enable_hwmods+0x20/0x34) (omap_device_enable+0x3c/0x50) (_od_runtime_resume+0x10/0x1c) (__rpm_callback+0x54/0x98) (rpm_callback+0x64/0x7c) (rpm_resume+0x434/0x554) (__pm_runtime_resume+0x48/0x74) (omap_i2c_xfer+0x28/0xe8) (__i2c_transfer+0x3c/0x78) (i2c_transfer+0x6c/0xc0) (i2c_master_send+0x38/0x48) (sha204p_send_command+0x60/0x9c) (sha204c_send_and_receive+0x5c/0x1e0) (sha204m_read+0x94/0xa0) (otp_do_read+0x50/0xa4) (vfs_ioctl+0x24/0x40) (do_vfs_ioctl+0x1b0/0x1c0) (sys_ioctl+0x38/0x54) (ret_fast_syscall+0x0/0x30) Code: e1a08002 ea000009 e598003c e592c05c (e7904003) Cc: stable@vger.kernel.org Signed-off-by: Jean-Philippe Fran=C3=A7ois Acked-by: Kevin Hilman [tony@atomide.com: updated description with oops] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d25a95fe9921..e3289888adfa 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2065,7 +2065,7 @@ static int _omap4_get_context_lost(struct omap_hwmod *oh) * do so is present in the hwmod data, then call it and pass along the * return value; otherwise, return 0. */ -static int __init _enable_preprogram(struct omap_hwmod *oh) +static int _enable_preprogram(struct omap_hwmod *oh) { if (!oh->class->enable_preprogram) return 0; -- cgit v1.2.3 From a8b09c52a66e801d87704cfebf57958b1991ab86 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 16 May 2013 11:25:07 -0700 Subject: ARM: OMAP: fix error return code in omap1_system_dma_init() Fix to return -ENOMEM in the d->chan alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/dma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 68ab858e27b7..a94b3a718d1a 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -345,6 +345,7 @@ static int __init omap1_system_dma_init(void) dev_err(&pdev->dev, "%s: Memory allocation failed for d->chan!\n", __func__); + ret = -ENOMEM; goto exit_release_d; } -- cgit v1.2.3 From a545ec160afea245939290e7f616f68de906a85c Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 16 May 2013 11:25:07 -0700 Subject: ARM: OMAP2+: Add missing CONFIG_ARCH_MULTI_V6=y to omap2plus_defconfig omap2plus_defconfig is missing CONFIG_ARCH_MULTI_V6. This results in undefined instruction traps in u-boot (and boot failures) on OMAP2xxx SoCs, which are ARM11-based. Fix by setting CONFIG_ARCH_MULTI_V6. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c1ef64bc5abd..f59090210ec9 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -20,6 +20,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_OMAP2PLUS=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y -- cgit v1.2.3 From 8ea6cd7af124ad070b44a7f60e225e45e3f38f79 Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 13 May 2013 13:56:43 -0700 Subject: Revert "MIPS: microMIPS: Support dynamic ASID sizing." This reverts commit f6b06d9361a008afb93b97fb3683a6e92d69d0f4. The next revert depends on this one, so this has to go too. Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: "Steven J. Hill" Cc: David Daney Patchwork: https://patchwork.linux-mips.org/patch/5241/ Signed-off-by: Ralf Baechle --- arch/mips/mm/tlbex.c | 34 ++-------------------------------- 1 file changed, 2 insertions(+), 32 deletions(-) diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 4d46d3787576..2ad41e94394e 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -309,32 +309,13 @@ static int check_for_high_segbits __cpuinitdata; static void __cpuinit insn_fixup(unsigned int **start, unsigned int **stop, unsigned int i_const) { - unsigned int **p; + unsigned int **p, *ip; for (p = start; p < stop; p++) { -#ifndef CONFIG_CPU_MICROMIPS - unsigned int *ip; - ip = *p; *ip = (*ip & 0xffff0000) | i_const; -#else - unsigned short *ip; - - ip = ((unsigned short *)((unsigned int)*p - 1)); - if ((*ip & 0xf000) == 0x4000) { - *ip &= 0xfff1; - *ip |= (i_const << 1); - } else if ((*ip & 0xf000) == 0x6000) { - *ip &= 0xfff1; - *ip |= ((i_const >> 2) << 1); - } else { - ip++; - *ip = i_const; - } -#endif - local_flush_icache_range((unsigned long)ip, - (unsigned long)ip + sizeof(*ip)); } + local_flush_icache_range((unsigned long)*p, (unsigned long)((*p) + 1)); } #define asid_insn_fixup(section, const) \ @@ -354,14 +335,6 @@ static void __cpuinit setup_asid(unsigned int inc, unsigned int mask, extern asmlinkage void handle_ri_rdhwr_vivt(void); unsigned long *vivt_exc; -#ifdef CONFIG_CPU_MICROMIPS - /* - * Worst case optimised microMIPS addiu instructions support - * only a 3-bit immediate value. - */ - if(inc > 7) - panic("Invalid ASID increment value!"); -#endif asid_insn_fixup(__asid_inc, inc); asid_insn_fixup(__asid_mask, mask); asid_insn_fixup(__asid_version_mask, version_mask); @@ -369,9 +342,6 @@ static void __cpuinit setup_asid(unsigned int inc, unsigned int mask, /* Patch up the 'handle_ri_rdhwr_vivt' handler. */ vivt_exc = (unsigned long *) &handle_ri_rdhwr_vivt; -#ifdef CONFIG_CPU_MICROMIPS - vivt_exc = (unsigned long *)((unsigned long) vivt_exc - 1); -#endif vivt_exc++; *vivt_exc = (*vivt_exc & ~mask) | mask; -- cgit v1.2.3 From 48c4ac976ae995f263cde8f09578de86bc8e9f1d Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 13 May 2013 13:56:44 -0700 Subject: Revert "MIPS: Allow ASID size to be determined at boot time." This reverts commit d532f3d26716a39dfd4b88d687bd344fbe77e390. The original commit has several problems: 1) Doesn't work with 64-bit kernels. 2) Calls TLBMISS_HANDLER_SETUP() before the code is generated. 3) Calls TLBMISS_HANDLER_SETUP() twice in per_cpu_trap_init() when only one call is needed. [ralf@linux-mips.org: Also revert the bits of the ASID patch which were hidden in the KVM merge.] Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: "Steven J. Hill" Cc: David Daney Patchwork: https://patchwork.linux-mips.org/patch/5242/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/kvm_host.h | 2 +- arch/mips/include/asm/mmu_context.h | 95 ++++++++++++++----------------------- arch/mips/kernel/genex.S | 2 +- arch/mips/kernel/smtc.c | 10 ++-- arch/mips/kernel/traps.c | 6 +-- arch/mips/kvm/kvm_mips_emul.c | 29 ++++++----- arch/mips/kvm/kvm_tlb.c | 26 +++++----- arch/mips/lib/dump_tlb.c | 5 +- arch/mips/lib/r3k_dump_tlb.c | 7 ++- arch/mips/mm/tlb-r3k.c | 20 ++++---- arch/mips/mm/tlb-r4k.c | 2 +- arch/mips/mm/tlb-r8k.c | 2 +- arch/mips/mm/tlbex.c | 49 ------------------- 13 files changed, 93 insertions(+), 162 deletions(-) diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h index e68781e18387..143875c6c95a 100644 --- a/arch/mips/include/asm/kvm_host.h +++ b/arch/mips/include/asm/kvm_host.h @@ -336,7 +336,7 @@ enum emulation_result { #define VPN2_MASK 0xffffe000 #define TLB_IS_GLOBAL(x) (((x).tlb_lo0 & MIPS3_PG_G) && ((x).tlb_lo1 & MIPS3_PG_G)) #define TLB_VPN2(x) ((x).tlb_hi & VPN2_MASK) -#define TLB_ASID(x) (ASID_MASK((x).tlb_hi)) +#define TLB_ASID(x) ((x).tlb_hi & ASID_MASK) #define TLB_IS_VALID(x, va) (((va) & (1 << PAGE_SHIFT)) ? ((x).tlb_lo1 & MIPS3_PG_V) : ((x).tlb_lo0 & MIPS3_PG_V)) struct kvm_mips_tlb { diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index 1554721e4808..820116067c10 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -67,68 +67,45 @@ extern unsigned long pgd_current[]; TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) #endif #endif /* CONFIG_MIPS_PGD_C0_CONTEXT*/ +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) -#define ASID_INC(asid) \ -({ \ - unsigned long __asid = asid; \ - __asm__("1:\taddiu\t%0,1\t\t\t\t# patched\n\t" \ - ".section\t__asid_inc,\"a\"\n\t" \ - ".word\t1b\n\t" \ - ".previous" \ - :"=r" (__asid) \ - :"0" (__asid)); \ - __asid; \ -}) -#define ASID_MASK(asid) \ -({ \ - unsigned long __asid = asid; \ - __asm__("1:\tandi\t%0,%1,0xfc0\t\t\t# patched\n\t" \ - ".section\t__asid_mask,\"a\"\n\t" \ - ".word\t1b\n\t" \ - ".previous" \ - :"=r" (__asid) \ - :"r" (__asid)); \ - __asid; \ -}) -#define ASID_VERSION_MASK \ -({ \ - unsigned long __asid; \ - __asm__("1:\taddiu\t%0,$0,0xff00\t\t\t\t# patched\n\t" \ - ".section\t__asid_version_mask,\"a\"\n\t" \ - ".word\t1b\n\t" \ - ".previous" \ - :"=r" (__asid)); \ - __asid; \ -}) -#define ASID_FIRST_VERSION \ -({ \ - unsigned long __asid = asid; \ - __asm__("1:\tli\t%0,0x100\t\t\t\t# patched\n\t" \ - ".section\t__asid_first_version,\"a\"\n\t" \ - ".word\t1b\n\t" \ - ".previous" \ - :"=r" (__asid)); \ - __asid; \ -}) - -#define ASID_FIRST_VERSION_R3000 0x1000 -#define ASID_FIRST_VERSION_R4000 0x100 -#define ASID_FIRST_VERSION_R8000 0x1000 -#define ASID_FIRST_VERSION_RM9000 0x1000 +#define ASID_INC 0x40 +#define ASID_MASK 0xfc0 + +#elif defined(CONFIG_CPU_R8000) + +#define ASID_INC 0x10 +#define ASID_MASK 0xff0 + +#elif defined(CONFIG_MIPS_MT_SMTC) + +#define ASID_INC 0x1 +extern unsigned long smtc_asid_mask; +#define ASID_MASK (smtc_asid_mask) +#define HW_ASID_MASK 0xff +/* End SMTC/34K debug hack */ +#else /* FIXME: not correct for R6000 */ + +#define ASID_INC 0x1 +#define ASID_MASK 0xff -#ifdef CONFIG_MIPS_MT_SMTC -#define SMTC_HW_ASID_MASK 0xff -extern unsigned int smtc_asid_mask; #endif #define cpu_context(cpu, mm) ((mm)->context.asid[cpu]) -#define cpu_asid(cpu, mm) ASID_MASK(cpu_context((cpu), (mm))) +#define cpu_asid(cpu, mm) (cpu_context((cpu), (mm)) & ASID_MASK) #define asid_cache(cpu) (cpu_data[cpu].asid_cache) static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) { } +/* + * All unused by hardware upper bits will be considered + * as a software asid extension. + */ +#define ASID_VERSION_MASK ((unsigned long)~(ASID_MASK|(ASID_MASK-1))) +#define ASID_FIRST_VERSION ((unsigned long)(~ASID_VERSION_MASK) + 1) + #ifndef CONFIG_MIPS_MT_SMTC /* Normal, classic MIPS get_new_mmu_context */ static inline void @@ -137,7 +114,7 @@ get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) extern void kvm_local_flush_tlb_all(void); unsigned long asid = asid_cache(cpu); - if (!ASID_MASK((asid = ASID_INC(asid)))) { + if (! ((asid += ASID_INC) & ASID_MASK) ) { if (cpu_has_vtag_icache) flush_icache_all(); #ifdef CONFIG_VIRTUALIZATION @@ -200,7 +177,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, * free up the ASID value for use and flush any old * instances of it from the TLB. */ - oldasid = ASID_MASK(read_c0_entryhi()); + oldasid = (read_c0_entryhi() & ASID_MASK); if(smtc_live_asid[mytlb][oldasid]) { smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu); if(smtc_live_asid[mytlb][oldasid] == 0) @@ -211,7 +188,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, * having ASID_MASK smaller than the hardware maximum, * make sure no "soft" bits become "hard"... */ - write_c0_entryhi((read_c0_entryhi() & ~SMTC_HW_ASID_MASK) | + write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) | cpu_asid(cpu, next)); ehb(); /* Make sure it propagates to TCStatus */ evpe(mtflags); @@ -264,15 +241,15 @@ activate_mm(struct mm_struct *prev, struct mm_struct *next) #ifdef CONFIG_MIPS_MT_SMTC /* See comments for similar code above */ mtflags = dvpe(); - oldasid = ASID_MASK(read_c0_entryhi()); + oldasid = read_c0_entryhi() & ASID_MASK; if(smtc_live_asid[mytlb][oldasid]) { smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu); if(smtc_live_asid[mytlb][oldasid] == 0) smtc_flush_tlb_asid(oldasid); } /* See comments for similar code above */ - write_c0_entryhi((read_c0_entryhi() & ~SMTC_HW_ASID_MASK) | - cpu_asid(cpu, next)); + write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) | + cpu_asid(cpu, next)); ehb(); /* Make sure it propagates to TCStatus */ evpe(mtflags); #else @@ -309,14 +286,14 @@ drop_mmu_context(struct mm_struct *mm, unsigned cpu) #ifdef CONFIG_MIPS_MT_SMTC /* See comments for similar code above */ prevvpe = dvpe(); - oldasid = ASID_MASK(read_c0_entryhi()); + oldasid = (read_c0_entryhi() & ASID_MASK); if (smtc_live_asid[mytlb][oldasid]) { smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu); if(smtc_live_asid[mytlb][oldasid] == 0) smtc_flush_tlb_asid(oldasid); } /* See comments for similar code above */ - write_c0_entryhi((read_c0_entryhi() & ~SMTC_HW_ASID_MASK) + write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) | cpu_asid(cpu, mm)); ehb(); /* Make sure it propagates to TCStatus */ evpe(prevvpe); diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index 5c2ba9f08a80..9098829bfcb0 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -493,7 +493,7 @@ NESTED(nmi_handler, PT_SIZE, sp) .set noreorder /* check if TLB contains a entry for EPC */ MFC0 k1, CP0_ENTRYHI - andi k1, 0xff /* ASID_MASK patched at run-time!! */ + andi k1, 0xff /* ASID_MASK */ MFC0 k0, CP0_EPC PTR_SRL k0, _PAGE_SHIFT + 1 PTR_SLL k0, _PAGE_SHIFT + 1 diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 31d22f3121c9..7186222dc5bb 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -111,7 +111,7 @@ static int vpe0limit; static int ipibuffers; static int nostlb; static int asidmask; -unsigned int smtc_asid_mask = 0xff; +unsigned long smtc_asid_mask = 0xff; static int __init vpe0tcs(char *str) { @@ -1395,7 +1395,7 @@ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) asid = asid_cache(cpu); do { - if (!ASID_MASK(ASID_INC(asid))) { + if (!((asid += ASID_INC) & ASID_MASK) ) { if (cpu_has_vtag_icache) flush_icache_all(); /* Traverse all online CPUs (hack requires contiguous range) */ @@ -1414,7 +1414,7 @@ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) mips_ihb(); } tcstat = read_tc_c0_tcstatus(); - smtc_live_asid[tlb][ASID_MASK(tcstat)] |= (asiduse)(0x1 << i); + smtc_live_asid[tlb][(tcstat & ASID_MASK)] |= (asiduse)(0x1 << i); if (!prevhalt) write_tc_c0_tchalt(0); } @@ -1423,7 +1423,7 @@ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) asid = ASID_FIRST_VERSION; local_flush_tlb_all(); /* start new asid cycle */ } - } while (smtc_live_asid[tlb][ASID_MASK(asid)]); + } while (smtc_live_asid[tlb][(asid & ASID_MASK)]); /* * SMTC shares the TLB within VPEs and possibly across all VPEs. @@ -1461,7 +1461,7 @@ void smtc_flush_tlb_asid(unsigned long asid) tlb_read(); ehb(); ehi = read_c0_entryhi(); - if (ASID_MASK(ehi) == asid) { + if ((ehi & ASID_MASK) == asid) { /* * Invalidate only entries with specified ASID, * makiing sure all entries differ. diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 77cff1f6d050..cb14db3c5764 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1656,7 +1656,6 @@ void __cpuinit per_cpu_trap_init(bool is_boot_cpu) unsigned int cpu = smp_processor_id(); unsigned int status_set = ST0_CU0; unsigned int hwrena = cpu_hwrena_impl_bits; - unsigned long asid = 0; #ifdef CONFIG_MIPS_MT_SMTC int secondaryTC = 0; int bootTC = (cpu == 0); @@ -1740,9 +1739,8 @@ void __cpuinit per_cpu_trap_init(bool is_boot_cpu) } #endif /* CONFIG_MIPS_MT_SMTC */ - asid = ASID_FIRST_VERSION; - cpu_data[cpu].asid_cache = asid; - TLBMISS_HANDLER_SETUP(); + if (!cpu_data[cpu].asid_cache) + cpu_data[cpu].asid_cache = ASID_FIRST_VERSION; atomic_inc(&init_mm.mm_count); current->active_mm = &init_mm; diff --git a/arch/mips/kvm/kvm_mips_emul.c b/arch/mips/kvm/kvm_mips_emul.c index 2b2bac9a40aa..4b6274b47f33 100644 --- a/arch/mips/kvm/kvm_mips_emul.c +++ b/arch/mips/kvm/kvm_mips_emul.c @@ -525,16 +525,18 @@ kvm_mips_emulate_CP0(uint32_t inst, uint32_t *opc, uint32_t cause, printk("MTCz, cop0->reg[EBASE]: %#lx\n", kvm_read_c0_guest_ebase(cop0)); } else if (rd == MIPS_CP0_TLB_HI && sel == 0) { - uint32_t nasid = ASID_MASK(vcpu->arch.gprs[rt]); + uint32_t nasid = + vcpu->arch.gprs[rt] & ASID_MASK; if ((KSEGX(vcpu->arch.gprs[rt]) != CKSEG0) && - (ASID_MASK(kvm_read_c0_guest_entryhi(cop0)) - != nasid)) { + ((kvm_read_c0_guest_entryhi(cop0) & + ASID_MASK) != nasid)) { kvm_debug ("MTCz, change ASID from %#lx to %#lx\n", - ASID_MASK(kvm_read_c0_guest_entryhi(cop0)), - ASID_MASK(vcpu->arch.gprs[rt])); + kvm_read_c0_guest_entryhi(cop0) & + ASID_MASK, + vcpu->arch.gprs[rt] & ASID_MASK); /* Blow away the shadow host TLBs */ kvm_mips_flush_host_tlb(1); @@ -986,7 +988,8 @@ kvm_mips_emulate_cache(uint32_t inst, uint32_t *opc, uint32_t cause, * resulting handler will do the right thing */ index = kvm_mips_guest_tlb_lookup(vcpu, (va & VPN2_MASK) | - ASID_MASK(kvm_read_c0_guest_entryhi(cop0))); + (kvm_read_c0_guest_entryhi + (cop0) & ASID_MASK)); if (index < 0) { vcpu->arch.host_cp0_entryhi = (va & VPN2_MASK); @@ -1151,7 +1154,7 @@ kvm_mips_emulate_tlbmiss_ld(unsigned long cause, uint32_t *opc, struct kvm_vcpu_arch *arch = &vcpu->arch; enum emulation_result er = EMULATE_DONE; unsigned long entryhi = (vcpu->arch. host_cp0_badvaddr & VPN2_MASK) | - ASID_MASK(kvm_read_c0_guest_entryhi(cop0)); + (kvm_read_c0_guest_entryhi(cop0) & ASID_MASK); if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { /* save old pc */ @@ -1198,7 +1201,7 @@ kvm_mips_emulate_tlbinv_ld(unsigned long cause, uint32_t *opc, enum emulation_result er = EMULATE_DONE; unsigned long entryhi = (vcpu->arch.host_cp0_badvaddr & VPN2_MASK) | - ASID_MASK(kvm_read_c0_guest_entryhi(cop0)); + (kvm_read_c0_guest_entryhi(cop0) & ASID_MASK); if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { /* save old pc */ @@ -1243,7 +1246,7 @@ kvm_mips_emulate_tlbmiss_st(unsigned long cause, uint32_t *opc, struct kvm_vcpu_arch *arch = &vcpu->arch; enum emulation_result er = EMULATE_DONE; unsigned long entryhi = (vcpu->arch.host_cp0_badvaddr & VPN2_MASK) | - ASID_MASK(kvm_read_c0_guest_entryhi(cop0)); + (kvm_read_c0_guest_entryhi(cop0) & ASID_MASK); if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { /* save old pc */ @@ -1287,7 +1290,7 @@ kvm_mips_emulate_tlbinv_st(unsigned long cause, uint32_t *opc, struct kvm_vcpu_arch *arch = &vcpu->arch; enum emulation_result er = EMULATE_DONE; unsigned long entryhi = (vcpu->arch.host_cp0_badvaddr & VPN2_MASK) | - ASID_MASK(kvm_read_c0_guest_entryhi(cop0)); + (kvm_read_c0_guest_entryhi(cop0) & ASID_MASK); if ((kvm_read_c0_guest_status(cop0) & ST0_EXL) == 0) { /* save old pc */ @@ -1356,7 +1359,7 @@ kvm_mips_emulate_tlbmod(unsigned long cause, uint32_t *opc, { struct mips_coproc *cop0 = vcpu->arch.cop0; unsigned long entryhi = (vcpu->arch.host_cp0_badvaddr & VPN2_MASK) | - ASID_MASK(kvm_read_c0_guest_entryhi(cop0)); + (kvm_read_c0_guest_entryhi(cop0) & ASID_MASK); struct kvm_vcpu_arch *arch = &vcpu->arch; enum emulation_result er = EMULATE_DONE; @@ -1783,8 +1786,8 @@ kvm_mips_handle_tlbmiss(unsigned long cause, uint32_t *opc, */ index = kvm_mips_guest_tlb_lookup(vcpu, (va & VPN2_MASK) | - ASID_MASK(kvm_read_c0_guest_entryhi - (vcpu->arch.cop0))); + (kvm_read_c0_guest_entryhi + (vcpu->arch.cop0) & ASID_MASK)); if (index < 0) { if (exccode == T_TLB_LD_MISS) { er = kvm_mips_emulate_tlbmiss_ld(cause, opc, run, vcpu); diff --git a/arch/mips/kvm/kvm_tlb.c b/arch/mips/kvm/kvm_tlb.c index 89511a9258d3..e3f0d9b8b6c5 100644 --- a/arch/mips/kvm/kvm_tlb.c +++ b/arch/mips/kvm/kvm_tlb.c @@ -51,13 +51,13 @@ EXPORT_SYMBOL(kvm_mips_is_error_pfn); uint32_t kvm_mips_get_kernel_asid(struct kvm_vcpu *vcpu) { - return ASID_MASK(vcpu->arch.guest_kernel_asid[smp_processor_id()]); + return vcpu->arch.guest_kernel_asid[smp_processor_id()] & ASID_MASK; } uint32_t kvm_mips_get_user_asid(struct kvm_vcpu *vcpu) { - return ASID_MASK(vcpu->arch.guest_user_asid[smp_processor_id()]); + return vcpu->arch.guest_user_asid[smp_processor_id()] & ASID_MASK; } inline uint32_t kvm_mips_get_commpage_asid (struct kvm_vcpu *vcpu) @@ -84,7 +84,7 @@ void kvm_mips_dump_host_tlbs(void) old_pagemask = read_c0_pagemask(); printk("HOST TLBs:\n"); - printk("ASID: %#lx\n", ASID_MASK(read_c0_entryhi())); + printk("ASID: %#lx\n", read_c0_entryhi() & ASID_MASK); for (i = 0; i < current_cpu_data.tlbsize; i++) { write_c0_index(i); @@ -428,7 +428,7 @@ int kvm_mips_guest_tlb_lookup(struct kvm_vcpu *vcpu, unsigned long entryhi) for (i = 0; i < KVM_MIPS_GUEST_TLB_SIZE; i++) { if (((TLB_VPN2(tlb[i]) & ~tlb[i].tlb_mask) == ((entryhi & VPN2_MASK) & ~tlb[i].tlb_mask)) && - (TLB_IS_GLOBAL(tlb[i]) || (TLB_ASID(tlb[i]) == ASID_MASK(entryhi)))) { + (TLB_IS_GLOBAL(tlb[i]) || (TLB_ASID(tlb[i]) == (entryhi & ASID_MASK)))) { index = i; break; } @@ -626,7 +626,7 @@ kvm_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu, { unsigned long asid = asid_cache(cpu); - if (!(ASID_MASK(ASID_INC(asid)))) { + if (!((asid += ASID_INC) & ASID_MASK)) { if (cpu_has_vtag_icache) { flush_icache_all(); } @@ -804,7 +804,8 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) if (!newasid) { /* If we preempted while the guest was executing, then reload the pre-empted ASID */ if (current->flags & PF_VCPU) { - write_c0_entryhi(ASID_MASK(vcpu->arch.preempt_entryhi)); + write_c0_entryhi(vcpu->arch. + preempt_entryhi & ASID_MASK); ehb(); } } else { @@ -816,11 +817,13 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) */ if (current->flags & PF_VCPU) { if (KVM_GUEST_KERNEL_MODE(vcpu)) - write_c0_entryhi(ASID_MASK(vcpu->arch. - guest_kernel_asid[cpu])); + write_c0_entryhi(vcpu->arch. + guest_kernel_asid[cpu] & + ASID_MASK); else - write_c0_entryhi(ASID_MASK(vcpu->arch. - guest_user_asid[cpu])); + write_c0_entryhi(vcpu->arch. + guest_user_asid[cpu] & + ASID_MASK); ehb(); } } @@ -879,7 +882,8 @@ uint32_t kvm_get_inst(uint32_t *opc, struct kvm_vcpu *vcpu) kvm_mips_guest_tlb_lookup(vcpu, ((unsigned long) opc & VPN2_MASK) | - ASID_MASK(kvm_read_c0_guest_entryhi(cop0))); + (kvm_read_c0_guest_entryhi + (cop0) & ASID_MASK)); if (index < 0) { kvm_err ("%s: get_user_failed for %p, vcpu: %p, ASID: %#lx\n", diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c index 8a12d00908e0..32b9f21bfd85 100644 --- a/arch/mips/lib/dump_tlb.c +++ b/arch/mips/lib/dump_tlb.c @@ -11,7 +11,6 @@ #include #include #include -#include static inline const char *msk2str(unsigned int mask) { @@ -56,7 +55,7 @@ static void dump_tlb(int first, int last) s_pagemask = read_c0_pagemask(); s_entryhi = read_c0_entryhi(); s_index = read_c0_index(); - asid = ASID_MASK(s_entryhi); + asid = s_entryhi & 0xff; for (i = first; i <= last; i++) { write_c0_index(i); @@ -86,7 +85,7 @@ static void dump_tlb(int first, int last) printk("va=%0*lx asid=%02lx\n", width, (entryhi & ~0x1fffUL), - ASID_MASK(entryhi)); + entryhi & 0xff); printk("\t[pa=%0*llx c=%d d=%d v=%d g=%d] ", width, (entrylo0 << 6) & PAGE_MASK, c0, diff --git a/arch/mips/lib/r3k_dump_tlb.c b/arch/mips/lib/r3k_dump_tlb.c index 8327698b9937..91615c2ef0cf 100644 --- a/arch/mips/lib/r3k_dump_tlb.c +++ b/arch/mips/lib/r3k_dump_tlb.c @@ -9,7 +9,6 @@ #include #include -#include #include #include #include @@ -22,7 +21,7 @@ static void dump_tlb(int first, int last) unsigned int asid; unsigned long entryhi, entrylo0; - asid = ASID_MASK(read_c0_entryhi()); + asid = read_c0_entryhi() & 0xfc0; for (i = first; i <= last; i++) { write_c0_index(i<<8); @@ -36,7 +35,7 @@ static void dump_tlb(int first, int last) /* Unused entries have a virtual address of KSEG0. */ if ((entryhi & 0xffffe000) != 0x80000000 - && (ASID_MASK(entryhi) == asid)) { + && (entryhi & 0xfc0) == asid) { /* * Only print entries in use */ @@ -45,7 +44,7 @@ static void dump_tlb(int first, int last) printk("va=%08lx asid=%08lx" " [pa=%06lx n=%d d=%d v=%d g=%d]", (entryhi & 0xffffe000), - ASID_MASK(entryhi), + entryhi & 0xfc0, entrylo0 & PAGE_MASK, (entrylo0 & (1 << 11)) ? 1 : 0, (entrylo0 & (1 << 10)) ? 1 : 0, diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c index 4a13c150f31b..a63d1ed0827f 100644 --- a/arch/mips/mm/tlb-r3k.c +++ b/arch/mips/mm/tlb-r3k.c @@ -51,7 +51,7 @@ void local_flush_tlb_all(void) #endif local_irq_save(flags); - old_ctx = ASID_MASK(read_c0_entryhi()); + old_ctx = read_c0_entryhi() & ASID_MASK; write_c0_entrylo0(0); entry = r3k_have_wired_reg ? read_c0_wired() : 8; for (; entry < current_cpu_data.tlbsize; entry++) { @@ -87,13 +87,13 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, #ifdef DEBUG_TLB printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", - ASID_MASK(cpu_context(cpu, mm)), start, end); + cpu_context(cpu, mm) & ASID_MASK, start, end); #endif local_irq_save(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; if (size <= current_cpu_data.tlbsize) { - int oldpid = ASID_MASK(read_c0_entryhi()); - int newpid = ASID_MASK(cpu_context(cpu, mm)); + int oldpid = read_c0_entryhi() & ASID_MASK; + int newpid = cpu_context(cpu, mm) & ASID_MASK; start &= PAGE_MASK; end += PAGE_SIZE - 1; @@ -166,10 +166,10 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) #ifdef DEBUG_TLB printk("[tlbpage<%lu,0x%08lx>]", cpu_context(cpu, vma->vm_mm), page); #endif - newpid = ASID_MASK(cpu_context(cpu, vma->vm_mm)); + newpid = cpu_context(cpu, vma->vm_mm) & ASID_MASK; page &= PAGE_MASK; local_irq_save(flags); - oldpid = ASID_MASK(read_c0_entryhi()); + oldpid = read_c0_entryhi() & ASID_MASK; write_c0_entryhi(page | newpid); BARRIER; tlb_probe(); @@ -197,10 +197,10 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte) if (current->active_mm != vma->vm_mm) return; - pid = ASID_MASK(read_c0_entryhi()); + pid = read_c0_entryhi() & ASID_MASK; #ifdef DEBUG_TLB - if ((pid != ASID_MASK(cpu_context(cpu, vma->vm_mm))) || (cpu_context(cpu, vma->vm_mm) == 0)) { + if ((pid != (cpu_context(cpu, vma->vm_mm) & ASID_MASK)) || (cpu_context(cpu, vma->vm_mm) == 0)) { printk("update_mmu_cache: Wheee, bogus tlbpid mmpid=%lu tlbpid=%d\n", (cpu_context(cpu, vma->vm_mm)), pid); } @@ -241,7 +241,7 @@ void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, local_irq_save(flags); /* Save old context and create impossible VPN2 value */ - old_ctx = ASID_MASK(read_c0_entryhi()); + old_ctx = read_c0_entryhi() & ASID_MASK; old_pagemask = read_c0_pagemask(); w = read_c0_wired(); write_c0_wired(w + 1); @@ -264,7 +264,7 @@ void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, #endif local_irq_save(flags); - old_ctx = ASID_MASK(read_c0_entryhi()); + old_ctx = read_c0_entryhi() & ASID_MASK; write_c0_entrylo0(entrylo0); write_c0_entryhi(entryhi); write_c0_index(wired); diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 09653b290d53..c643de4c473a 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -287,7 +287,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) ENTER_CRITICAL(flags); - pid = ASID_MASK(read_c0_entryhi()); + pid = read_c0_entryhi() & ASID_MASK; address &= (PAGE_MASK << 1); write_c0_entryhi(address | pid); pgdp = pgd_offset(vma->vm_mm, address); diff --git a/arch/mips/mm/tlb-r8k.c b/arch/mips/mm/tlb-r8k.c index 122f9207f49e..91c2499f806a 100644 --- a/arch/mips/mm/tlb-r8k.c +++ b/arch/mips/mm/tlb-r8k.c @@ -195,7 +195,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) if (current->active_mm != vma->vm_mm) return; - pid = ASID_MASK(read_c0_entryhi()); + pid = read_c0_entryhi() & ASID_MASK; local_irq_save(flags); address &= PAGE_MASK; diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 2ad41e94394e..ce9818eef7d3 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -29,7 +29,6 @@ #include #include -#include #include #include #include @@ -306,48 +305,6 @@ static struct uasm_reloc relocs[128] __cpuinitdata; static int check_for_high_segbits __cpuinitdata; #endif -static void __cpuinit insn_fixup(unsigned int **start, unsigned int **stop, - unsigned int i_const) -{ - unsigned int **p, *ip; - - for (p = start; p < stop; p++) { - ip = *p; - *ip = (*ip & 0xffff0000) | i_const; - } - local_flush_icache_range((unsigned long)*p, (unsigned long)((*p) + 1)); -} - -#define asid_insn_fixup(section, const) \ -do { \ - extern unsigned int *__start_ ## section; \ - extern unsigned int *__stop_ ## section; \ - insn_fixup(&__start_ ## section, &__stop_ ## section, const); \ -} while(0) - -/* - * Caller is assumed to flush the caches before the first context switch. - */ -static void __cpuinit setup_asid(unsigned int inc, unsigned int mask, - unsigned int version_mask, - unsigned int first_version) -{ - extern asmlinkage void handle_ri_rdhwr_vivt(void); - unsigned long *vivt_exc; - - asid_insn_fixup(__asid_inc, inc); - asid_insn_fixup(__asid_mask, mask); - asid_insn_fixup(__asid_version_mask, version_mask); - asid_insn_fixup(__asid_first_version, first_version); - - /* Patch up the 'handle_ri_rdhwr_vivt' handler. */ - vivt_exc = (unsigned long *) &handle_ri_rdhwr_vivt; - vivt_exc++; - *vivt_exc = (*vivt_exc & ~mask) | mask; - - current_cpu_data.asid_cache = first_version; -} - static int check_for_high_segbits __cpuinitdata; static unsigned int kscratch_used_mask __cpuinitdata; @@ -2226,7 +2183,6 @@ void __cpuinit build_tlb_refill_handler(void) case CPU_TX3922: case CPU_TX3927: #ifndef CONFIG_MIPS_PGD_C0_CONTEXT - setup_asid(0x40, 0xfc0, 0xf000, ASID_FIRST_VERSION_R3000); if (cpu_has_local_ebase) build_r3000_tlb_refill_handler(); if (!run_once) { @@ -2252,11 +2208,6 @@ void __cpuinit build_tlb_refill_handler(void) break; default: -#ifndef CONFIG_MIPS_MT_SMTC - setup_asid(0x1, 0xff, 0xff00, ASID_FIRST_VERSION_R4000); -#else - setup_asid(0x1, smtc_asid_mask, 0xff00, ASID_FIRST_VERSION_R4000); -#endif if (!run_once) { scratch_reg = allocate_kscratch(); #ifdef CONFIG_MIPS_PGD_C0_CONTEXT -- cgit v1.2.3 From 264b83c07a84223f0efd0d1db9ccc66d6f88288f Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Thu, 16 May 2013 17:43:55 +0200 Subject: usermodehelper: check subprocess_info->path != NULL argv_split(empty_or_all_spaces) happily succeeds, it simply returns argc == 0 and argv[0] == NULL. Change call_usermodehelper_exec() to check sub_info->path != NULL to avoid the crash. This is the minimal fix, todo: - perhaps we should change argv_split() to return NULL or change the callers. - kill or justify ->path[0] check - narrow the scope of helper_lock() Signed-off-by: Oleg Nesterov Acked-By: Lucas De Marchi Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- kernel/kmod.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/kernel/kmod.c b/kernel/kmod.c index 1296e72e4161..8241906c4b61 100644 --- a/kernel/kmod.c +++ b/kernel/kmod.c @@ -569,6 +569,11 @@ int call_usermodehelper_exec(struct subprocess_info *sub_info, int wait) int retval = 0; helper_lock(); + if (!sub_info->path) { + retval = -EINVAL; + goto out; + } + if (sub_info->path[0] == '\0') goto out; -- cgit v1.2.3 From 03cd7e4e1ea16cd151c799a33b5ca1fd41a464df Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 10 May 2013 19:23:40 +0200 Subject: cfg80211: fix wiphy_register error path If rfkill_register() fails in wiphy_register() the struct device is unregistered but everything else isn't (regulatory, debugfs) and we even leave the wiphy instance on all internal lists even though it will likely be freed soon, which is clearly a problem. Fix this by cleaning up properly. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg --- net/wireless/core.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/net/wireless/core.c b/net/wireless/core.c index 84c9ad7e1dca..6c9f8005cac0 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -638,17 +638,21 @@ int wiphy_register(struct wiphy *wiphy) * cfg80211_mutex lock */ res = rfkill_register(rdev->rfkill); - if (res) - goto out_rm_dev; + if (res) { + device_del(&rdev->wiphy.dev); + + mutex_lock(&cfg80211_mutex); + debugfs_remove_recursive(rdev->wiphy.debugfsdir); + list_del_rcu(&rdev->list); + wiphy_regulatory_deregister(wiphy); + mutex_unlock(&cfg80211_mutex); + return res; + } rtnl_lock(); rdev->wiphy.registered = true; rtnl_unlock(); return 0; - -out_rm_dev: - device_del(&rdev->wiphy.dev); - return res; } EXPORT_SYMBOL(wiphy_register); -- cgit v1.2.3 From c07fe5ae0667f1077d671f62a093261223f918af Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Wed, 24 Apr 2013 00:40:05 -0400 Subject: mac80211_hwsim: correctly register the platform driver Not registering a platform_driver would make us access garbage when the platform callbacks under driver_register() kicks in. Signed-off-by: Sasha Levin Tested-By: Martin Pitt Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index b878a32e7a98..cb34c7895f2a 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1723,11 +1723,11 @@ static void mac80211_hwsim_free(void) class_destroy(hwsim_class); } - -static struct device_driver mac80211_hwsim_driver = { - .name = "mac80211_hwsim", - .bus = &platform_bus_type, - .owner = THIS_MODULE, +static struct platform_driver mac80211_hwsim_driver = { + .driver = { + .name = "mac80211_hwsim", + .owner = THIS_MODULE, + }, }; static const struct net_device_ops hwsim_netdev_ops = { @@ -2219,7 +2219,7 @@ static int __init init_mac80211_hwsim(void) spin_lock_init(&hwsim_radio_lock); INIT_LIST_HEAD(&hwsim_radios); - err = driver_register(&mac80211_hwsim_driver); + err = platform_driver_register(&mac80211_hwsim_driver); if (err) return err; @@ -2254,7 +2254,7 @@ static int __init init_mac80211_hwsim(void) err = -ENOMEM; goto failed_drvdata; } - data->dev->driver = &mac80211_hwsim_driver; + data->dev->driver = &mac80211_hwsim_driver.driver; err = device_bind_driver(data->dev); if (err != 0) { printk(KERN_DEBUG @@ -2564,7 +2564,7 @@ failed_drvdata: failed: mac80211_hwsim_free(); failed_unregister_driver: - driver_unregister(&mac80211_hwsim_driver); + platform_driver_unregister(&mac80211_hwsim_driver); return err; } module_init(init_mac80211_hwsim); @@ -2577,6 +2577,6 @@ static void __exit exit_mac80211_hwsim(void) mac80211_hwsim_free(); unregister_netdev(hwsim_mon); - driver_unregister(&mac80211_hwsim_driver); + platform_driver_unregister(&mac80211_hwsim_driver); } module_exit(exit_mac80211_hwsim); -- cgit v1.2.3 From a92eecbbeaf01ea2267751569dd3301248513915 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 29 Apr 2013 12:09:14 +0200 Subject: cfg80211: fix WoWLAN wakeup tracing If the device reports a non-wireless wakeup reason, the tracing code crashes trying to dereference a NULL pointer. Fix this by checking the pointer on all accesses and also add a non_wireless tag to the event. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg --- net/wireless/trace.h | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/net/wireless/trace.h b/net/wireless/trace.h index ecd4fcec3c94..5755bc14abbd 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -2441,6 +2441,7 @@ TRACE_EVENT(cfg80211_report_wowlan_wakeup, TP_STRUCT__entry( WIPHY_ENTRY WDEV_ENTRY + __field(bool, non_wireless) __field(bool, disconnect) __field(bool, magic_pkt) __field(bool, gtk_rekey_failure) @@ -2449,20 +2450,22 @@ TRACE_EVENT(cfg80211_report_wowlan_wakeup, __field(bool, rfkill_release) __field(s32, pattern_idx) __field(u32, packet_len) - __dynamic_array(u8, packet, wakeup->packet_present_len) + __dynamic_array(u8, packet, + wakeup ? wakeup->packet_present_len : 0) ), TP_fast_assign( WIPHY_ASSIGN; WDEV_ASSIGN; - __entry->disconnect = wakeup->disconnect; - __entry->magic_pkt = wakeup->magic_pkt; - __entry->gtk_rekey_failure = wakeup->gtk_rekey_failure; - __entry->eap_identity_req = wakeup->eap_identity_req; - __entry->four_way_handshake = wakeup->four_way_handshake; - __entry->rfkill_release = wakeup->rfkill_release; - __entry->pattern_idx = wakeup->pattern_idx; - __entry->packet_len = wakeup->packet_len; - if (wakeup->packet && wakeup->packet_present_len) + __entry->non_wireless = !wakeup; + __entry->disconnect = wakeup ? wakeup->disconnect : false; + __entry->magic_pkt = wakeup ? wakeup->magic_pkt : false; + __entry->gtk_rekey_failure = wakeup ? wakeup->gtk_rekey_failure : false; + __entry->eap_identity_req = wakeup ? wakeup->eap_identity_req : false; + __entry->four_way_handshake = wakeup ? wakeup->four_way_handshake : false; + __entry->rfkill_release = wakeup ? wakeup->rfkill_release : false; + __entry->pattern_idx = wakeup ? wakeup->pattern_idx : false; + __entry->packet_len = wakeup ? wakeup->packet_len : false; + if (wakeup && wakeup->packet && wakeup->packet_present_len) memcpy(__get_dynamic_array(packet), wakeup->packet, wakeup->packet_present_len); ), -- cgit v1.2.3 From b8360ab8d2caf8a4d0d95bc03f0ba6956459505f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 29 Apr 2013 14:57:44 +0200 Subject: mac80211: fix IEEE80211_SDATA_DISCONNECT_RESUME Since commit 12e7f517029dad819c45eca9ca01fdb9ba57616b, IEEE80211_SDATA_DISCONNECT_RESUME no longer worked as it would simply never be tested. Restore a bit of the code removed there and in 9b7d72c1041ec5b20b24af487a9 to make it work again. Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 1 + net/mac80211/mlme.c | 25 +++++++++++++++++++++++++ net/mac80211/util.c | 7 +++++++ 3 files changed, 33 insertions(+) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 158e6eb188d3..44be28cfc6c4 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1267,6 +1267,7 @@ void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata); void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata); void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata, __le16 fc, bool acked); +void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata); /* IBSS code */ void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 29620bfc7a69..8a948ca55d80 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3623,6 +3623,31 @@ static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata) } } +#ifdef CONFIG_PM +void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + + mutex_lock(&ifmgd->mtx); + if (!ifmgd->associated) { + mutex_unlock(&ifmgd->mtx); + return; + } + + if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) { + sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME; + mlme_dbg(sdata, "driver requested disconnect after resume\n"); + ieee80211_sta_connection_lost(sdata, + ifmgd->associated->bssid, + WLAN_REASON_UNSPECIFIED, + true); + mutex_unlock(&ifmgd->mtx); + return; + } + mutex_unlock(&ifmgd->mtx); +} +#endif + /* interface setup */ void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata) { diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 3f87fa468b1f..27e07150eb46 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1740,6 +1740,13 @@ int ieee80211_reconfig(struct ieee80211_local *local) mb(); local->resuming = false; + list_for_each_entry(sdata, &local->interfaces, list) { + if (!ieee80211_sdata_running(sdata)) + continue; + if (sdata->vif.type == NL80211_IFTYPE_STATION) + ieee80211_sta_restart(sdata); + } + mod_timer(&local->sta_cleanup, jiffies + 1); #else WARN_ON(1); -- cgit v1.2.3 From 3670946fe2e942bcb09ec9bbc587bf305f9f97da Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 3 May 2013 09:35:35 +0200 Subject: mac80211: fix HT beacon-based channel switch handling When an HT AP is advertising channel switch in a beacon, it doesn't (and shouldn't, according to 802.11-2012 Table 8-20) include a secondary channel offset element. The only possible interpretation is that the previous secondary channel offset remains valid, so use that when switching channel based only on beacon information. VHT requires the Wide Bandwidth Channel Switch subelement to be present in the Channel Switch Wrapper element, so the code for that is probably ok (see 802.11ac Draft 4, 8.4.2.165.) Reported-by: Sujith Manoharan Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 8a948ca55d80..d87d3f1a2f94 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1015,7 +1015,8 @@ static void ieee80211_chswitch_timer(unsigned long data) static void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, - u64 timestamp, struct ieee802_11_elems *elems) + u64 timestamp, struct ieee802_11_elems *elems, + bool beacon) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; @@ -1032,6 +1033,7 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, struct cfg80211_chan_def new_vht_chandef = {}; const struct ieee80211_sec_chan_offs_ie *sec_chan_offs; const struct ieee80211_wide_bw_chansw_ie *wide_bw_chansw_ie; + const struct ieee80211_ht_operation *ht_oper; int secondary_channel_offset = -1; ASSERT_MGD_MTX(ifmgd); @@ -1048,11 +1050,14 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, sec_chan_offs = elems->sec_chan_offs; wide_bw_chansw_ie = elems->wide_bw_chansw_ie; + ht_oper = elems->ht_operation; if (ifmgd->flags & (IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_40MHZ)) { sec_chan_offs = NULL; wide_bw_chansw_ie = NULL; + /* only used for bandwidth here */ + ht_oper = NULL; } if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT) @@ -1094,10 +1099,20 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, return; } - if (sec_chan_offs) { + if (!beacon && sec_chan_offs) { secondary_channel_offset = sec_chan_offs->sec_chan_offs; + } else if (beacon && ht_oper) { + secondary_channel_offset = + ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET; } else if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { - /* if HT is enabled and the IE not present, it's still HT */ + /* + * If it's not a beacon, HT is enabled and the IE not present, + * it's 20 MHz, 802.11-2012 8.5.2.6: + * This element [the Secondary Channel Offset Element] is + * present when switching to a 40 MHz channel. It may be + * present when switching to a 20 MHz channel (in which + * case the secondary channel offset is set to SCN). + */ secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; } @@ -2796,7 +2811,8 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, mutex_unlock(&local->iflist_mtx); } - ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, elems); + ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, + elems, true); } @@ -3210,7 +3226,7 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, - &elems); + &elems, false); } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) { ies_len = skb->len - offsetof(struct ieee80211_mgmt, @@ -3232,7 +3248,7 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, - &elems); + &elems, false); } break; } -- cgit v1.2.3 From f6b3d85f7f6d66f890862d763b2ed092c5dd4322 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 3 May 2013 10:01:03 +0200 Subject: mac80211: fix spurious RCU warning and update documentation Document rx vs tx status concurrency requirements. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- include/net/mac80211.h | 12 ++++++++---- net/mac80211/rate.c | 9 ++++++++- 2 files changed, 16 insertions(+), 5 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 04c2d4670dc6..885898a40d13 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3043,7 +3043,8 @@ void ieee80211_napi_complete(struct ieee80211_hw *hw); * This function may not be called in IRQ context. Calls to this function * for a single hardware must be synchronized against each other. Calls to * this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be - * mixed for a single hardware. + * mixed for a single hardware. Must not run concurrently with + * ieee80211_tx_status() or ieee80211_tx_status_ni(). * * In process context use instead ieee80211_rx_ni(). * @@ -3059,7 +3060,8 @@ void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb); * (internally defers to a tasklet.) * * Calls to this function, ieee80211_rx() or ieee80211_rx_ni() may not - * be mixed for a single hardware. + * be mixed for a single hardware.Must not run concurrently with + * ieee80211_tx_status() or ieee80211_tx_status_ni(). * * @hw: the hardware this frame came in on * @skb: the buffer to receive, owned by mac80211 after this call @@ -3073,7 +3075,8 @@ void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb); * (internally disables bottom halves). * * Calls to this function, ieee80211_rx() and ieee80211_rx_irqsafe() may - * not be mixed for a single hardware. + * not be mixed for a single hardware. Must not run concurrently with + * ieee80211_tx_status() or ieee80211_tx_status_ni(). * * @hw: the hardware this frame came in on * @skb: the buffer to receive, owned by mac80211 after this call @@ -3196,7 +3199,8 @@ void ieee80211_get_tx_rates(struct ieee80211_vif *vif, * This function may not be called in IRQ context. Calls to this function * for a single hardware must be synchronized against each other. Calls * to this function, ieee80211_tx_status_ni() and ieee80211_tx_status_irqsafe() - * may not be mixed for a single hardware. + * may not be mixed for a single hardware. Must not run concurrently with + * ieee80211_rx() or ieee80211_rx_ni(). * * @hw: the hardware the frame was transmitted by * @skb: the frame that was transmitted, owned by mac80211 after this call diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index 0d51877efdb7..d3f414fe67e0 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -688,8 +688,15 @@ int rate_control_set_rates(struct ieee80211_hw *hw, struct ieee80211_sta *pubsta, struct ieee80211_sta_rates *rates) { - struct ieee80211_sta_rates *old = rcu_dereference(pubsta->rates); + struct ieee80211_sta_rates *old; + /* + * mac80211 guarantees that this function will not be called + * concurrently, so the following RCU access is safe, even without + * extra locking. This can not be checked easily, so we just set + * the condition to true. + */ + old = rcu_dereference_protected(pubsta->rates, true); rcu_assign_pointer(pubsta->rates, rates); if (old) kfree_rcu(old, rcu_head); -- cgit v1.2.3 From 655914ab863bcc06c84270e4159fd59002d6b529 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 6 May 2013 15:54:58 +0200 Subject: mac80211: use just spin_lock() in ieee80211_get_tkip_p2k() ieee80211_get_tkip_p2k() may be called with interrupts disabled, so spin_unlock_bh() isn't safe and leads to warnings. Since it's always called with BHs disabled already, just use spin_lock(). Cc: stable@vger.kernel.org Reported-by: Milan Kocian Acked-by: Stanislaw Gruszka Signed-off-by: Johannes Berg --- net/mac80211/tkip.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c index 3ed801d90f1e..124b1fdc20d0 100644 --- a/net/mac80211/tkip.c +++ b/net/mac80211/tkip.c @@ -208,10 +208,10 @@ void ieee80211_get_tkip_p2k(struct ieee80211_key_conf *keyconf, u32 iv32 = get_unaligned_le32(&data[4]); u16 iv16 = data[2] | (data[0] << 8); - spin_lock_bh(&key->u.tkip.txlock); + spin_lock(&key->u.tkip.txlock); ieee80211_compute_tkip_p1k(key, iv32); tkip_mixing_phase2(tk, ctx, iv16, p2k); - spin_unlock_bh(&key->u.tkip.txlock); + spin_unlock(&key->u.tkip.txlock); } EXPORT_SYMBOL(ieee80211_get_tkip_p2k); -- cgit v1.2.3 From a838490b493b56d523638c150985a2614d814b01 Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Wed, 8 May 2013 16:35:55 +0300 Subject: nl80211: Add wdev identifier to some nl80211 notifications Adding the attributes fixes an issue with P2P Device not working properly for management frame TX. Signed-off-by: Ilan Peer Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index afa283841e8c..0dca987abae4 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -9970,6 +9970,7 @@ int nl80211_send_mgmt(struct cfg80211_registered_device *rdev, if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) || (netdev && nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex)) || + nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev)) || nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ, freq) || (sig_dbm && nla_put_u32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm)) || @@ -10010,6 +10011,7 @@ void cfg80211_mgmt_tx_status(struct wireless_dev *wdev, u64 cookie, if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) || (netdev && nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex)) || + nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev)) || nla_put(msg, NL80211_ATTR_FRAME, len, buf) || nla_put_u64(msg, NL80211_ATTR_COOKIE, cookie) || (ack && nla_put_flag(msg, NL80211_ATTR_ACK))) -- cgit v1.2.3 From 2b9ccd4e4308272e5aec614b77c5385e7ec2ec90 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 13 May 2013 16:42:40 +0200 Subject: mac80211: fix AP-mode frame matching In AP mode, ignore frames with mis-matched BSSID that aren't multicast or sent to the correct destination. This fixes reporting public action frames to userspace multiple times on multiple virtual AP interfaces. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index c8447af76ead..8e2952620256 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -3036,6 +3036,9 @@ static int prepare_for_handlers(struct ieee80211_rx_data *rx, * and location updates. Note that mac80211 * itself never looks at these frames. */ + if (!multicast && + !ether_addr_equal(sdata->vif.addr, hdr->addr1)) + return 0; if (ieee80211_is_public_action(hdr, skb->len)) return 1; if (!ieee80211_is_beacon(hdr->frame_control)) -- cgit v1.2.3 From 2430816b4e29fd9e6719ff46a4292d8f58565cff Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 14 May 2013 09:19:53 +0200 Subject: cfg80211: fix interface down/disconnect state handling When the interface goes down, there's no need to call cfg80211_mlme_down() after __cfg80211_disconnect() as the latter will call the former (if appropriate.) Also, in __cfg80211_disconnect(), if the cfg80211 SME isn't used, __cfg80211_disconnected() may still need to be called (depending on the current state) so that the SME state gets cleared. Signed-off-by: Johannes Berg --- net/wireless/core.c | 1 - net/wireless/sme.c | 3 ++- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/net/wireless/core.c b/net/wireless/core.c index 6c9f8005cac0..73405e00c800 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -870,7 +870,6 @@ void cfg80211_leave(struct cfg80211_registered_device *rdev, #endif __cfg80211_disconnect(rdev, dev, WLAN_REASON_DEAUTH_LEAVING, true); - cfg80211_mlme_down(rdev, dev); wdev_unlock(wdev); break; case NL80211_IFTYPE_MESH_POINT: diff --git a/net/wireless/sme.c b/net/wireless/sme.c index a9dc5c736df0..8b5eddfba1e5 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -961,7 +961,7 @@ int __cfg80211_disconnect(struct cfg80211_registered_device *rdev, /* was it connected by userspace SME? */ if (!wdev->conn) { cfg80211_mlme_down(rdev, dev); - return 0; + goto disconnect; } if (wdev->sme_state == CFG80211_SME_CONNECTING && @@ -987,6 +987,7 @@ int __cfg80211_disconnect(struct cfg80211_registered_device *rdev, return err; } + disconnect: if (wdev->sme_state == CFG80211_SME_CONNECTED) __cfg80211_disconnected(dev, NULL, 0, 0, false); else if (wdev->sme_state == CFG80211_SME_CONNECTING) -- cgit v1.2.3 From de3d43a37de9549356d1bc4a6a2a3f07ccbdf072 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 14 May 2013 09:39:02 +0200 Subject: mac80211: report deauth to cfg80211 for local state change Even if the frame isn't transmitted to the AP, we need to report it to cfg80211 so the state there can be updated correctly. Reported-by: Jouni Malinen Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d87d3f1a2f94..a46e490f20dd 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -4370,7 +4370,7 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; bool tx = !req->local_state_change; - bool sent_frame = false; + bool report_frame = false; mutex_lock(&ifmgd->mtx); @@ -4387,7 +4387,7 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, ieee80211_destroy_auth_data(sdata, false); mutex_unlock(&ifmgd->mtx); - sent_frame = tx; + report_frame = true; goto out; } @@ -4395,12 +4395,12 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, ether_addr_equal(ifmgd->associated->bssid, req->bssid)) { ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, req->reason_code, tx, frame_buf); - sent_frame = tx; + report_frame = true; } mutex_unlock(&ifmgd->mtx); out: - if (sent_frame) + if (report_frame) __cfg80211_send_deauth(sdata->dev, frame_buf, IEEE80211_DEAUTH_FRAME_LEN); -- cgit v1.2.3 From e248ad30204eff6559b4d2d94d49d9d46c08185a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 16 May 2013 10:24:28 +0200 Subject: cfg80211: fix sending WoWLAN TCP wakeup settings The code sending the current WoWLAN TCP wakeup settings in nl80211_send_wowlan_tcp() is not closing the nested attribute, thus causing the parser to get confused on the receiver side in userspace (iw). Fix this. Cc: stable@vger.kernel.org [3.9] Reported-by: Deepak Arora Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 0dca987abae4..dfdb5e643211 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -7577,6 +7577,8 @@ static int nl80211_send_wowlan_tcp(struct sk_buff *msg, &tcp->payload_tok)) return -ENOBUFS; + nla_nest_end(msg, nl_tcp); + return 0; } -- cgit v1.2.3 From f70ed7b330ce769828d402f920fb13da6c13ea63 Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Sun, 28 Apr 2013 08:18:28 +0300 Subject: iwlwifi: mvm: Always use SCAN_TYPE_FORCED The FW AUX framework does not handle well cases where time events fail to be scheduled (and as a result issues assert 0x3330). Until a proper fix is in place, WA this by always setting the scan type to SCAN_TYPE_FORCED. Cc: stable@vger.kernel.org Signed-off-by: Ilan Peer Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/scan.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 2157b0f8ced5..2476e43799d5 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -298,6 +298,12 @@ int iwl_mvm_scan_request(struct iwl_mvm *mvm, else cmd->type = cpu_to_le32(SCAN_TYPE_FORCED); + /* + * TODO: This is a WA due to a bug in the FW AUX framework that does not + * properly handle time events that fail to be scheduled + */ + cmd->type = cpu_to_le32(SCAN_TYPE_FORCED); + cmd->repeats = cpu_to_le32(1); /* -- cgit v1.2.3 From 51b6b9e029e81c857f9d8d17060f499cd25febdb Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 2 May 2013 15:01:24 +0300 Subject: iwlwifi: mvm: tell firmware to let multicast frames in Without this command, the firmware will filter out all the multicast frames. Let them all in as for now. Later we will want to optimize this to save power. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/fw-api.h | 27 +++++++++++++++++++++++++++ drivers/net/wireless/iwlwifi/mvm/mac80211.c | 15 +++++++++++++++ drivers/net/wireless/iwlwifi/mvm/ops.c | 1 + 3 files changed, 43 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h index 191dcae8ba47..c6384555aab4 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -173,6 +173,8 @@ enum { REPLY_DEBUG_CMD = 0xf0, DEBUG_LOG_MSG = 0xf7, + MCAST_FILTER_CMD = 0xd0, + /* D3 commands/notifications */ D3_CONFIG_CMD = 0xd3, PROT_OFFLOAD_CONFIG_CMD = 0xd4, @@ -948,4 +950,29 @@ struct iwl_set_calib_default_cmd { u8 data[0]; } __packed; /* PHY_CALIB_OVERRIDE_VALUES_S */ +#define MAX_PORT_ID_NUM 2 + +/** + * struct iwl_mcast_filter_cmd - configure multicast filter. + * @filter_own: Set 1 to filter out multicast packets sent by station itself + * @port_id: Multicast MAC addresses array specifier. This is a strange way + * to identify network interface adopted in host-device IF. + * It is used by FW as index in array of addresses. This array has + * MAX_PORT_ID_NUM members. + * @count: Number of MAC addresses in the array + * @pass_all: Set 1 to pass all multicast packets. + * @bssid: current association BSSID. + * @addr_list: Place holder for array of MAC addresses. + * IMPORTANT: add padding if necessary to ensure DWORD alignment. + */ +struct iwl_mcast_filter_cmd { + u8 filter_own; + u8 port_id; + u8 count; + u8 pass_all; + u8 bssid[6]; + u8 reserved[2]; + u8 addr_list[0]; +} __packed; /* MCAST_FILTERING_CMD_API_S_VER_1 */ + #endif /* __fw_api_h__ */ diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index dd158ec571fb..899b56c85b5b 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -701,6 +701,20 @@ static void iwl_mvm_configure_filter(struct ieee80211_hw *hw, *total_flags = 0; } +static int iwl_mvm_configure_mcast_filter(struct iwl_mvm *mvm, + struct ieee80211_vif *vif) +{ + struct iwl_mcast_filter_cmd mcast_filter_cmd = { + .pass_all = 1, + }; + + memcpy(mcast_filter_cmd.bssid, vif->bss_conf.bssid, ETH_ALEN); + + return iwl_mvm_send_cmd_pdu(mvm, MCAST_FILTER_CMD, CMD_SYNC, + sizeof(mcast_filter_cmd), + &mcast_filter_cmd); +} + static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_bss_conf *bss_conf, @@ -722,6 +736,7 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm, return; } iwl_mvm_bt_coex_vif_assoc(mvm, vif); + iwl_mvm_configure_mcast_filter(mvm, vif); } else if (mvmvif->ap_sta_id != IWL_MVM_STATION_COUNT) { /* remove AP station now that the MAC is unassoc */ ret = iwl_mvm_rm_sta_id(mvm, vif, mvmvif->ap_sta_id); diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c index fe031d304d1e..b29c31a41594 100644 --- a/drivers/net/wireless/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -292,6 +292,7 @@ static const char *iwl_mvm_cmd_strings[REPLY_MAX] = { CMD(BT_COEX_PROT_ENV), CMD(BT_PROFILE_NOTIFICATION), CMD(BT_CONFIG), + CMD(MCAST_FILTER_CMD), }; #undef CMD -- cgit v1.2.3 From ba283927268d45184c17c37ff78d427e59026229 Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Thu, 2 May 2013 16:34:48 +0300 Subject: iwlwifi: mvm: Prevent setting assoc flag in MAC_CONTEXT_CMD In the normal flow first MAC_CONTEXT_CMD for particular interface is never sent while associated. The exception is fw restart flow when resuming from suspend when WoWLAN is enabled. In this case successive "add" and "modify" MAC_CONTEXT_CMD commands may be sent with assoc flag set what cause FW mal functioning. To prevent this never set assoc flag in MAC_CONTEXT_CMD with action "add". Cc: stable@vger.kernel.org Signed-off-by: Alexander Bondar Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c index e6eca4d66f6c..b2cc3d98e0f7 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c @@ -586,10 +586,12 @@ static int iwl_mvm_mac_ctxt_send_cmd(struct iwl_mvm *mvm, */ static void iwl_mvm_mac_ctxt_cmd_fill_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, - struct iwl_mac_data_sta *ctxt_sta) + struct iwl_mac_data_sta *ctxt_sta, + bool force_assoc_off) { /* We need the dtim_period to set the MAC as associated */ - if (vif->bss_conf.assoc && vif->bss_conf.dtim_period) { + if (vif->bss_conf.assoc && vif->bss_conf.dtim_period && + !force_assoc_off) { u32 dtim_offs; /* @@ -659,7 +661,8 @@ static int iwl_mvm_mac_ctxt_cmd_station(struct iwl_mvm *mvm, cmd.filter_flags &= ~cpu_to_le32(MAC_FILTER_IN_BEACON); /* Fill the data specific for station mode */ - iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.sta); + iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.sta, + action == FW_CTXT_ACTION_ADD); return iwl_mvm_mac_ctxt_send_cmd(mvm, &cmd); } @@ -677,7 +680,8 @@ static int iwl_mvm_mac_ctxt_cmd_p2p_client(struct iwl_mvm *mvm, iwl_mvm_mac_ctxt_cmd_common(mvm, vif, &cmd, action); /* Fill the data specific for station mode */ - iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.p2p_sta.sta); + iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.p2p_sta.sta, + action == FW_CTXT_ACTION_ADD); cmd.p2p_sta.ctwin = cpu_to_le32(noa->oppps_ctwindow & IEEE80211_P2P_OPPPS_CTWINDOW_MASK); -- cgit v1.2.3 From e3d4bc8cc0230e8dc8033484666f03f87392a8c4 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 7 May 2013 14:08:24 +0300 Subject: iwlwifi: mvm: fix aggregation drain flow Move the counter for non-AMPDU frames to mvm. It is needed for the drain flow which happens once the ieee80211_sta has been freed, so keeping it in iwl_mvm_sta which is embed into ieee80211_sta is not a good idea. Also, since its purpose it to remove the STA in the fw only after all the frames for this station have exited the shared Tx queues, we need to decrement it in the reclaim flow. This flow can happen after ieee80211_sta has been removed, which means that we have no iwl_mvm_sta there. So we can't know what is the vif type. Hence, we know audit these frames for all the vif types. In order to avoid spawning sta_drained_wk all the time, we now check that we are in a flow in which draining might happen - only when mvmsta is NULL. This is better than previous code that would spawn sta_drained_wk all the time in AP mode. Cc: stable@vger.kernel.org [3.9] Signed-off-by: Emmanuel Grumbach Reviewed-by: Ilan Peer Reviewed-by: Johannes Berg Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 2 +- drivers/net/wireless/iwlwifi/mvm/mvm.h | 1 + drivers/net/wireless/iwlwifi/mvm/sta.c | 13 ++++++-- drivers/net/wireless/iwlwifi/mvm/sta.h | 2 -- drivers/net/wireless/iwlwifi/mvm/tx.c | 48 +++++++++++++++++++++-------- 5 files changed, 48 insertions(+), 18 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 899b56c85b5b..a5eb8c82f16a 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -946,7 +946,7 @@ static void iwl_mvm_mac_sta_notify(struct ieee80211_hw *hw, switch (cmd) { case STA_NOTIFY_SLEEP: - if (atomic_read(&mvmsta->pending_frames) > 0) + if (atomic_read(&mvm->pending_frames[mvmsta->sta_id]) > 0) ieee80211_sta_block_awake(hw, sta, true); /* * The fw updates the STA to be asleep. Tx packets on the Tx diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index 8269bc562951..9f46b23801bc 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -292,6 +292,7 @@ struct iwl_mvm { struct ieee80211_sta __rcu *fw_id_to_mac_id[IWL_MVM_STATION_COUNT]; struct work_struct sta_drained_wk; unsigned long sta_drained[BITS_TO_LONGS(IWL_MVM_STATION_COUNT)]; + atomic_t pending_frames[IWL_MVM_STATION_COUNT]; /* configured by mac80211 */ u32 rts_threshold; diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index 0fd96e4da461..5c664ed54400 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -219,7 +219,7 @@ int iwl_mvm_add_sta(struct iwl_mvm *mvm, mvm_sta->max_agg_bufsize = LINK_QUAL_AGG_FRAME_LIMIT_DEF; /* HW restart, don't assume the memory has been zeroed */ - atomic_set(&mvm_sta->pending_frames, 0); + atomic_set(&mvm->pending_frames[sta_id], 0); mvm_sta->tid_disable_agg = 0; mvm_sta->tfd_queue_msk = 0; for (i = 0; i < IEEE80211_NUM_ACS; i++) @@ -406,15 +406,22 @@ int iwl_mvm_rm_sta(struct iwl_mvm *mvm, mvmvif->ap_sta_id = IWL_MVM_STATION_COUNT; } + /* + * Make sure that the tx response code sees the station as -EBUSY and + * calls the drain worker. + */ + spin_lock_bh(&mvm_sta->lock); /* * There are frames pending on the AC queues for this station. * We need to wait until all the frames are drained... */ - if (atomic_read(&mvm_sta->pending_frames)) { - ret = iwl_mvm_drain_sta(mvm, mvm_sta, true); + if (atomic_read(&mvm->pending_frames[mvm_sta->sta_id])) { rcu_assign_pointer(mvm->fw_id_to_mac_id[mvm_sta->sta_id], ERR_PTR(-EBUSY)); + spin_unlock_bh(&mvm_sta->lock); + ret = iwl_mvm_drain_sta(mvm, mvm_sta, true); } else { + spin_unlock_bh(&mvm_sta->lock); ret = iwl_mvm_rm_sta_common(mvm, mvm_sta->sta_id); rcu_assign_pointer(mvm->fw_id_to_mac_id[mvm_sta->sta_id], NULL); } diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.h b/drivers/net/wireless/iwlwifi/mvm/sta.h index 12abd2d71835..a4ddce77aaae 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.h +++ b/drivers/net/wireless/iwlwifi/mvm/sta.h @@ -274,7 +274,6 @@ struct iwl_mvm_tid_data { * @bt_reduced_txpower: is reduced tx power enabled for this station * @lock: lock to protect the whole struct. Since %tid_data is access from Tx * and from Tx response flow, it needs a spinlock. - * @pending_frames: number of frames for this STA on the shared Tx queues. * @tid_data: per tid data. Look at %iwl_mvm_tid_data. * * When mac80211 creates a station it reserves some space (hw->sta_data_size) @@ -290,7 +289,6 @@ struct iwl_mvm_sta { u8 max_agg_bufsize; bool bt_reduced_txpower; spinlock_t lock; - atomic_t pending_frames; struct iwl_mvm_tid_data tid_data[IWL_MAX_TID_COUNT]; struct iwl_lq_sta lq_sta; struct ieee80211_vif *vif; diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c index 479074303bd7..f212f16502ff 100644 --- a/drivers/net/wireless/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/iwlwifi/mvm/tx.c @@ -416,9 +416,8 @@ int iwl_mvm_tx_skb(struct iwl_mvm *mvm, struct sk_buff *skb, spin_unlock(&mvmsta->lock); - if (mvmsta->vif->type == NL80211_IFTYPE_AP && - txq_id < IWL_MVM_FIRST_AGG_QUEUE) - atomic_inc(&mvmsta->pending_frames); + if (txq_id < IWL_MVM_FIRST_AGG_QUEUE) + atomic_inc(&mvm->pending_frames[mvmsta->sta_id]); return 0; @@ -680,16 +679,41 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, /* * If the txq is not an AMPDU queue, there is no chance we freed * several skbs. Check that out... - * If there are no pending frames for this STA, notify mac80211 that - * this station can go to sleep in its STA table. */ - if (txq_id < IWL_MVM_FIRST_AGG_QUEUE && mvmsta && - !WARN_ON(skb_freed > 1) && - mvmsta->vif->type == NL80211_IFTYPE_AP && - atomic_sub_and_test(skb_freed, &mvmsta->pending_frames)) { - ieee80211_sta_block_awake(mvm->hw, sta, false); - set_bit(sta_id, mvm->sta_drained); - schedule_work(&mvm->sta_drained_wk); + if (txq_id < IWL_MVM_FIRST_AGG_QUEUE && !WARN_ON(skb_freed > 1) && + atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id])) { + if (mvmsta) { + /* + * If there are no pending frames for this STA, notify + * mac80211 that this station can go to sleep in its + * STA table. + */ + if (mvmsta->vif->type == NL80211_IFTYPE_AP) + ieee80211_sta_block_awake(mvm->hw, sta, false); + /* + * We might very well have taken mvmsta pointer while + * the station was being removed. The remove flow might + * have seen a pending_frame (because we didn't take + * the lock) even if now the queues are drained. So make + * really sure now that this the station is not being + * removed. If it is, run the drain worker to remove it. + */ + spin_lock_bh(&mvmsta->lock); + sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]); + if (IS_ERR_OR_NULL(sta)) { + /* + * Station disappeared in the meantime: + * so we are draining. + */ + set_bit(sta_id, mvm->sta_drained); + schedule_work(&mvm->sta_drained_wk); + } + spin_unlock_bh(&mvmsta->lock); + } else if (!mvmsta) { + /* Tx response without STA, so we are draining */ + set_bit(sta_id, mvm->sta_drained); + schedule_work(&mvm->sta_drained_wk); + } } rcu_read_unlock(); -- cgit v1.2.3 From 1b6b698f53b3a5382a907308048d77c8bacca4ab Mon Sep 17 00:00:00 2001 From: Alexandru Gheorghiu Date: Thu, 16 May 2013 14:04:24 -0500 Subject: drivers: char: ipmi: Replaced kmalloc and strcpy with kstrdup Replaced calls to kmalloc followed by strcpy with a sincle call to kstrdup. Patch found using coccinelle. Signed-off-by: Alexandru Gheorghiu Signed-off-by: Corey Minyard Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_msghandler.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 4d439d2fcfd6..4445fa164a2d 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -2037,12 +2037,11 @@ int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name, entry = kmalloc(sizeof(*entry), GFP_KERNEL); if (!entry) return -ENOMEM; - entry->name = kmalloc(strlen(name)+1, GFP_KERNEL); + entry->name = kstrdup(name, GFP_KERNEL); if (!entry->name) { kfree(entry); return -ENOMEM; } - strcpy(entry->name, name); file = proc_create_data(name, 0, smi->proc_dir, proc_ops, data); if (!file) { -- cgit v1.2.3 From a5f2b3d6a738e7d4180012fe7b541172f8c8dcea Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 16 May 2013 14:04:25 -0500 Subject: drivers/char/ipmi: memcpy, need additional 2 bytes to avoid memory overflow When calling memcpy, read_data and write_data need additional 2 bytes. write_data: for checking: "if (size > IPMI_MAX_MSG_LENGTH)" for operating: "memcpy(bt->write_data + 3, data + 1, size - 1)" read_data: for checking: "if (msg_len < 3 || msg_len > IPMI_MAX_MSG_LENGTH)" for operating: "memcpy(data + 2, bt->read_data + 4, msg_len - 2)" Signed-off-by: Chen Gang Signed-off-by: Corey Minyard Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_bt_sm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c index cdd4c09fda96..a22a7a502740 100644 --- a/drivers/char/ipmi/ipmi_bt_sm.c +++ b/drivers/char/ipmi/ipmi_bt_sm.c @@ -95,9 +95,9 @@ struct si_sm_data { enum bt_states state; unsigned char seq; /* BT sequence number */ struct si_sm_io *io; - unsigned char write_data[IPMI_MAX_MSG_LENGTH]; + unsigned char write_data[IPMI_MAX_MSG_LENGTH + 2]; /* +2 for memcpy */ int write_count; - unsigned char read_data[IPMI_MAX_MSG_LENGTH]; + unsigned char read_data[IPMI_MAX_MSG_LENGTH + 2]; /* +2 for memcpy */ int read_count; int truncated; long timeout; /* microseconds countdown */ -- cgit v1.2.3 From 0849bfece0199a345b0c5143d10cbc1dc228a60f Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Thu, 16 May 2013 14:04:26 -0500 Subject: ipmi: Improve error messages on failed irq enable When the interrupt enable message returns an error, the messages are not entirely accurate nor helpful. So improve them. Signed-off-by: Corey Minyard Cc: Andy Lutomirski Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_si_intf.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 313538abe63c..af4b23ffc5a6 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -663,8 +663,10 @@ static void handle_transaction_done(struct smi_info *smi_info) /* We got the flags from the SMI, now handle them. */ smi_info->handlers->get_result(smi_info->si_sm, msg, 4); if (msg[2] != 0) { - dev_warn(smi_info->dev, "Could not enable interrupts" - ", failed get, using polled mode.\n"); + dev_warn(smi_info->dev, + "Couldn't get irq info: %x.\n", msg[2]); + dev_warn(smi_info->dev, + "Maybe ok, but ipmi might run very slowly.\n"); smi_info->si_state = SI_NORMAL; } else { msg[0] = (IPMI_NETFN_APP_REQUEST << 2); @@ -685,10 +687,12 @@ static void handle_transaction_done(struct smi_info *smi_info) /* We got the flags from the SMI, now handle them. */ smi_info->handlers->get_result(smi_info->si_sm, msg, 4); - if (msg[2] != 0) - dev_warn(smi_info->dev, "Could not enable interrupts" - ", failed set, using polled mode.\n"); - else + if (msg[2] != 0) { + dev_warn(smi_info->dev, + "Couldn't set irq info: %x.\n", msg[2]); + dev_warn(smi_info->dev, + "Maybe ok, but ipmi might run very slowly.\n"); + } else smi_info->interrupt_disabled = 0; smi_info->si_state = SI_NORMAL; break; -- cgit v1.2.3 From 6368087e851e697679af059b4247aca33a69cef3 Mon Sep 17 00:00:00 2001 From: Benjamin LaHaise Date: Thu, 16 May 2013 14:04:27 -0500 Subject: ipmi: ipmi_devintf: compat_ioctl method fails to take ipmi_mutex When a 32 bit version of ipmitool is used on a 64 bit kernel, the ipmi_devintf code fails to correctly acquire ipmi_mutex. This results in incomplete data being retrieved in some cases, or other possible failures. Add a wrapper around compat_ipmi_ioctl() to take ipmi_mutex to fix this. Signed-off-by: Benjamin LaHaise Signed-off-by: Corey Minyard Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_devintf.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c index 9eb360ff8cab..d5a5f020810a 100644 --- a/drivers/char/ipmi/ipmi_devintf.c +++ b/drivers/char/ipmi/ipmi_devintf.c @@ -837,13 +837,25 @@ static long compat_ipmi_ioctl(struct file *filep, unsigned int cmd, return ipmi_ioctl(filep, cmd, arg); } } + +static long unlocked_compat_ipmi_ioctl(struct file *filep, unsigned int cmd, + unsigned long arg) +{ + int ret; + + mutex_lock(&ipmi_mutex); + ret = compat_ipmi_ioctl(filep, cmd, arg); + mutex_unlock(&ipmi_mutex); + + return ret; +} #endif static const struct file_operations ipmi_fops = { .owner = THIS_MODULE, .unlocked_ioctl = ipmi_unlocked_ioctl, #ifdef CONFIG_COMPAT - .compat_ioctl = compat_ipmi_ioctl, + .compat_ioctl = unlocked_compat_ipmi_ioctl, #endif .open = ipmi_open, .release = ipmi_release, -- cgit v1.2.3 From 6ff50cd55545d922f5c62776fe1feb38a9846168 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 15 May 2013 15:38:01 +0000 Subject: tcp: gso: do not generate out of order packets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit GSO TCP handler has following issues : 1) ooo_okay from original GSO packet is duplicated to all segments 2) segments (but the last one) are orphaned, so transmit path can not get transmit queue number from the socket. This happens if GSO segmentation is done before stacked device for example. Result is we can send packets from a given TCP flow to different TX queues (if using multiqueue NICS). This generates OOO problems and spurious SACK & retransmits. Fix this by keeping socket pointer set for all segments. This means that every segment must also have a destructor, and the original gso skb truesize must be split on all segments, to keep precise sk->sk_wmem_alloc accounting. Signed-off-by: Eric Dumazet Cc: Maciej Żenczykowski Cc: Tom Herbert Cc: Neal Cardwell Cc: Yuchung Cheng Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 10c93930abda..ab450c099aa4 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2887,6 +2887,7 @@ struct sk_buff *tcp_tso_segment(struct sk_buff *skb, unsigned int mss; struct sk_buff *gso_skb = skb; __sum16 newcheck; + bool ooo_okay, copy_destructor; if (!pskb_may_pull(skb, sizeof(*th))) goto out; @@ -2927,10 +2928,18 @@ struct sk_buff *tcp_tso_segment(struct sk_buff *skb, goto out; } + copy_destructor = gso_skb->destructor == tcp_wfree; + ooo_okay = gso_skb->ooo_okay; + /* All segments but the first should have ooo_okay cleared */ + skb->ooo_okay = 0; + segs = skb_segment(skb, features); if (IS_ERR(segs)) goto out; + /* Only first segment might have ooo_okay set */ + segs->ooo_okay = ooo_okay; + delta = htonl(oldlen + (thlen + mss)); skb = segs; @@ -2950,6 +2959,17 @@ struct sk_buff *tcp_tso_segment(struct sk_buff *skb, thlen, skb->csum)); seq += mss; + if (copy_destructor) { + skb->destructor = gso_skb->destructor; + skb->sk = gso_skb->sk; + /* {tcp|sock}_wfree() use exact truesize accounting : + * sum(skb->truesize) MUST be exactly be gso_skb->truesize + * So we account mss bytes of 'true size' for each segment. + * The last segment will contain the remaining. + */ + skb->truesize = mss; + gso_skb->truesize -= mss; + } skb = skb->next; th = tcp_hdr(skb); @@ -2962,7 +2982,7 @@ struct sk_buff *tcp_tso_segment(struct sk_buff *skb, * is freed at TX completion, and not right now when gso_skb * is freed by GSO engine */ - if (gso_skb->destructor == tcp_wfree) { + if (copy_destructor) { swap(gso_skb->sk, skb->sk); swap(gso_skb->destructor, skb->destructor); swap(gso_skb->truesize, skb->truesize); -- cgit v1.2.3 From 3aefe2b4a8003517d6e15112f806fd4069785389 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 16 May 2013 06:31:42 +0000 Subject: NET: mv643xx_eth: avoid lockdep dump on interface down When the interface is shutdown, the mv643xx_eth driver hits the following lockdep dump: ================================= [ INFO: inconsistent lock state ] 3.8.0+ #303 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. NetworkManager/3449 [HC0[0]:SC0[0]:HE1:SE1] takes: (_xmit_ETHER#2){+.?...}, at: [] txq_reclaim+0x60/0x230 {IN-SOFTIRQ-W} state was registered at: [] mark_irqflags+0xf8/0x1c4 [] __lock_acquire+0x458/0x9a4 [] lock_acquire+0x60/0x74 [] _raw_spin_lock+0x40/0x50 [] sch_direct_xmit+0xa4/0x2e4 [] dev_queue_xmit+0x174/0x508 [] ip6_finish_output2+0xd0/0x3c4 [] mld_sendpack+0x190/0x368 [] mld_ifc_timer_expire+0xc/0x58 [] call_timer_fn+0x6c/0xe0 [] run_timer_softirq+0x1d8/0x210 [] __do_softirq+0xe0/0x1b4 [] irq_exit+0x64/0x6c [] handle_IRQ+0x34/0x84 [] __irq_usr+0x30/0x80 irq event stamp: 160603 hardirqs last enabled at (160603): [] kfree+0xa8/0xe8 hardirqs last disabled at (160602): [] kfree+0x1c/0xe8 softirqs last enabled at (160304): [] mib_counters_update+0x5ec/0x60c softirqs last disabled at (160302): [] _raw_spin_lock_bh+0x14/0x54 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(_xmit_ETHER#2); lock(_xmit_ETHER#2); *** DEADLOCK *** 1 lock held by NetworkManager/3449: #0: (rtnl_mutex){+.+.+.}, at: [] rtnetlink_rcv+0xc/0x24 stack backtrace: [] (unwind_backtrace+0x0/0xf8) from [] (print_usage_bug+0x150/0x1d4) [] (print_usage_bug+0x150/0x1d4) from [] (mark_lock_irq+0x248/0x290) [] (mark_lock_irq+0x248/0x290) from [] (mark_lock+0x158/0x404) [] (mark_lock+0x158/0x404) from [] (mark_irqflags+0x138/0x1c4) [] (mark_irqflags+0x138/0x1c4) from [] (__lock_acquire+0x458/0x9a4) [] (__lock_acquire+0x458/0x9a4) from [] (lock_acquire+0x60/0x74) [] (lock_acquire+0x60/0x74) from [] (_raw_spin_lock+0x40/0x50) [] (_raw_spin_lock+0x40/0x50) from [] (txq_reclaim+0x60/0x230) [] (txq_reclaim+0x60/0x230) from [] (txq_deinit+0x24/0xcc) [] (txq_deinit+0x24/0xcc) from [] (mv643xx_eth_stop+0x1a8/0x1bc) [] (mv643xx_eth_stop+0x1a8/0x1bc) from [] (__dev_close_many+0x88/0xcc) [] (__dev_close_many+0x88/0xcc) from [] (__dev_close+0x28/0x3c) [] (__dev_close+0x28/0x3c) from [] (__dev_change_flags+0x7c/0x134) [] (__dev_change_flags+0x7c/0x134) from [] (dev_change_flags+0x10/0x48) [] (dev_change_flags+0x10/0x48) from [] (do_setlink+0x1a0/0x730) [] (do_setlink+0x1a0/0x730) from [] (rtnl_newlink+0x304/0x4b0) [] (rtnl_newlink+0x304/0x4b0) from [] (rtnetlink_rcv_msg+0x25c/0x2a0) [] (rtnetlink_rcv_msg+0x25c/0x2a0) from [] (netlink_rcv_skb+0xbc/0xd8) [] (netlink_rcv_skb+0xbc/0xd8) from [] (rtnetlink_rcv+0x1c/0x24) [] (rtnetlink_rcv+0x1c/0x24) from [] (netlink_unicast_kernel+0x88/0xd4) [] (netlink_unicast_kernel+0x88/0xd4) from [] (netlink_unicast+0x138/0x180) [] (netlink_unicast+0x138/0x180) from [] (netlink_sendmsg+0x208/0x32c) [] (netlink_sendmsg+0x208/0x32c) from [] (sock_sendmsg+0x84/0xa4) [] (sock_sendmsg+0x84/0xa4) from [] (__sys_sendmsg+0x2ac/0x2c4) [] (__sys_sendmsg+0x2ac/0x2c4) from [] (sys_sendmsg+0x3c/0x68) [] (sys_sendmsg+0x3c/0x68) from [] (ret_fast_syscall+0x0/0x3c) It seems that txq_reclaim() takes the netif tx lock: __netif_tx_lock(nq, smp_processor_id()); in a context outside of softirq context, and thus is susceptible to deadlock should an interrupt occur. Use __netif_tx_lock_bh()/__netif_tx_unlock_bh() instead. Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mv643xx_eth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 8f63c36b2cdc..2ad1494efbb3 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -867,7 +867,7 @@ static int txq_reclaim(struct tx_queue *txq, int budget, int force) struct netdev_queue *nq = netdev_get_tx_queue(mp->dev, txq->index); int reclaimed; - __netif_tx_lock(nq, smp_processor_id()); + __netif_tx_lock_bh(nq); reclaimed = 0; while (reclaimed < budget && txq->tx_desc_count > 0) { @@ -913,7 +913,7 @@ static int txq_reclaim(struct tx_queue *txq, int budget, int force) dev_kfree_skb(skb); } - __netif_tx_unlock(nq); + __netif_tx_unlock_bh(nq); if (reclaimed < budget) mp->work_tx &= ~(1 << txq->index); -- cgit v1.2.3 From b0ce3508b25ea6fa10ae3ca254de1d695b521702 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 16 May 2013 07:34:53 +0000 Subject: bonding: allow TSO being set on bonding master MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In some situations, we need to disable TSO on bonding slaves. bonding device automatically unset TSO in bond_fix_features(), and performance is not good because : 1) We consume more cpu cycles. 2) GSO segmentation has some bugs leading to out of order TCP packets if this segmentation is done before virtual device. This particular problem will be addressed in a separate patch. This patch allows TSO being set/unset on the bonding master, so that GSO segmentation is done after bonding layer. Signed-off-by: Eric Dumazet Cc: Michał Mirosław Cc: Jay Vosburgh Cc: Andy Gospodarek Cc: Maciej Żenczykowski Cc: Tom Herbert Cc: Neal Cardwell Cc: Yuchung Cheng Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 1 + include/linux/netdevice.h | 11 +++++++++++ 2 files changed, 12 insertions(+) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index d0aade04e49a..449ad9bbe45c 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1362,6 +1362,7 @@ static netdev_features_t bond_fix_features(struct net_device *dev, slave->dev->features, mask); } + features = netdev_add_tso_features(features, mask); out: read_unlock(&bond->lock); diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index a94a5a0ab122..60584b185a0c 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2733,6 +2733,17 @@ static inline netdev_features_t netdev_get_wanted_features( } netdev_features_t netdev_increment_features(netdev_features_t all, netdev_features_t one, netdev_features_t mask); + +/* Allow TSO being used on stacked device : + * Performing the GSO segmentation before last device + * is a performance improvement. + */ +static inline netdev_features_t netdev_add_tso_features(netdev_features_t features, + netdev_features_t mask) +{ + return netdev_increment_features(features, NETIF_F_ALL_TSO, mask); +} + int __netdev_update_features(struct net_device *dev); void netdev_update_features(struct net_device *dev); void netdev_change_features(struct net_device *dev); -- cgit v1.2.3 From ab2273c62dbec17432d40d2a78ce380f3d34a216 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 1 May 2013 12:27:31 -0700 Subject: staging: sep: fix driver build and kconfig Fix build errors in staging/sep/ by making DX_SEP depend on CRYPTO. drivers/built-in.o: In function `sep_sha1_init': sep_crypto.c:(.text+0x245ece): undefined reference to `crypto_enqueue_request' drivers/built-in.o: In function `sep_sha1_update': sep_crypto.c:(.text+0x245f4f): undefined reference to `crypto_enqueue_request' drivers/built-in.o: In function `sep_sha1_final': sep_crypto.c:(.text+0x245fcf): undefined reference to `crypto_enqueue_request' drivers/built-in.o: In function `sep_sha1_finup': sep_crypto.c:(.text+0x24604f): undefined reference to `crypto_enqueue_request' drivers/built-in.o: In function `sep_sha1_digest': sep_crypto.c:(.text+0x2460de): undefined reference to `crypto_enqueue_request' drivers/built-in.o:sep_crypto.c:(.text+0x24616e): more undefined references to `crypto_enqueue_request' follow drivers/built-in.o: In function `sep_crypto_block': sep_crypto.c:(.text+0x247c81): undefined reference to `ablkcipher_walk_phys' sep_crypto.c:(.text+0x247e40): undefined reference to `ablkcipher_walk_phys' drivers/built-in.o: In function `sep_dequeuer': sep_crypto.c:(.text+0x248ab9): undefined reference to `crypto_dequeue_request' sep_crypto.c:(.text+0x248afa): undefined reference to `crypto_ahash_type' sep_crypto.c:(.text+0x248fdf): undefined reference to `crypto_dequeue_request' drivers/built-in.o: In function `sep_crypto_setup': (.text+0x24902a): undefined reference to `crypto_init_queue' drivers/built-in.o: In function `sep_crypto_setup': (.text+0x24909c): undefined reference to `crypto_register_ahash' drivers/built-in.o: In function `sep_crypto_setup': (.text+0x2490c4): undefined reference to `crypto_register_alg' drivers/built-in.o: In function `sep_crypto_setup': (.text+0x2490f7): undefined reference to `crypto_unregister_alg' drivers/built-in.o: In function `sep_crypto_setup': (.text+0x249118): undefined reference to `crypto_unregister_ahash' drivers/built-in.o: In function `sep_crypto_takedown': (.text+0x249176): undefined reference to `crypto_unregister_ahash' drivers/built-in.o: In function `sep_crypto_takedown': (.text+0x249197): undefined reference to `crypto_unregister_alg' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/staging/sep/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/sep/Kconfig b/drivers/staging/sep/Kconfig index 185b676d858a..aab945a316ea 100644 --- a/drivers/staging/sep/Kconfig +++ b/drivers/staging/sep/Kconfig @@ -1,6 +1,6 @@ config DX_SEP tristate "Discretix SEP driver" - depends on PCI + depends on PCI && CRYPTO help Discretix SEP driver; used for the security processor subsystem on board the Intel Mobile Internet Device and adds SEP availability -- cgit v1.2.3 From a5017b962059f7cec8f6d2dfb286ef3fbfbaab82 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:21:46 +0100 Subject: staging: ste_rmi4: Suppress 'ignoring return value of ‘regulator_enable()' warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c: In function ‘synaptics_rmi4_resume’: drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c:1090:18: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result [-Wunused-result Cc: Greg Kroah-Hartman Cc: devel@driverdev.osuosl.org Acked-by: Srinidhi Kasagar Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c index fe667dde43ce..386362c9964f 100644 --- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c +++ b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c @@ -1087,7 +1087,11 @@ static int synaptics_rmi4_resume(struct device *dev) unsigned char intr_status; struct synaptics_rmi4_data *rmi4_data = dev_get_drvdata(dev); - regulator_enable(rmi4_data->regulator); + retval = regulator_enable(rmi4_data->regulator); + if (retval) { + dev_err(dev, "Regulator enable failed (%d)\n", retval); + return retval; + } enable_irq(rmi4_data->i2c_client->irq); rmi4_data->touch_stopped = false; -- cgit v1.2.3 From fcce768067ae5f397ab5f96e2e471b9ba6a4bf96 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 2 May 2013 17:16:08 +0200 Subject: staging/drm: imx: add missing dependencies The imx DRM driver needs a couple of extra Kconfig dependencies to avoid random build failures: drivers/staging/imx-drm/ipuv3-crtc.c:448: undefined reference to `ipu_idmac_put' drivers/staging/imx-drm/ipuv3-crtc.c:450: undefined reference to `ipu_dmfc_put' drivers/staging/imx-drm/ipuv3-crtc.c:452: undefined reference to `ipu_dp_put' drivers/staging/imx-drm/ipuv3-crtc.c:454: undefined reference to `ipu_di_put' drivers/built-in.o: In function `ipu_probe': :(.text+0x4b4174): undefined reference to `device_reset' drivers/built-in.o: In function `imx_tve_probe': drivers/staging/imx-drm/imx-tve.c:648: undefined reference to `devm_regmap_init_mmio_clk' drivers/built-in.o: In function `imx_pd_connector_get_modes': drivers/staging/imx-drm/parallel-display.c:78: undefined reference to `of_get_drm_display_mode' Cc: Greg Kroah-Hartman Cc: Shawn Guo Cc: Philipp Zabel Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/staging/imx-drm/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/staging/imx-drm/Kconfig b/drivers/staging/imx-drm/Kconfig index 8c9e40390f42..35ccda56fc2a 100644 --- a/drivers/staging/imx-drm/Kconfig +++ b/drivers/staging/imx-drm/Kconfig @@ -1,6 +1,7 @@ config DRM_IMX tristate "DRM Support for Freescale i.MX" select DRM_KMS_HELPER + select VIDEOMODE_HELPERS select DRM_GEM_CMA_HELPER select DRM_KMS_CMA_HELPER depends on DRM && (ARCH_MXC || ARCH_MULTIPLATFORM) @@ -23,6 +24,7 @@ config DRM_IMX_PARALLEL_DISPLAY config DRM_IMX_TVE tristate "Support for TV and VGA displays" depends on DRM_IMX + select REGMAP_MMIO help Choose this to enable the internal Television Encoder (TVe) found on i.MX53 processors. @@ -30,6 +32,7 @@ config DRM_IMX_TVE config DRM_IMX_IPUV3_CORE tristate "IPUv3 core support" depends on DRM_IMX + depends on RESET_CONTROLLER help Choose this if you have a i.MX5/6 system and want to use the IPU. This option only enables IPU base @@ -38,5 +41,6 @@ config DRM_IMX_IPUV3_CORE config DRM_IMX_IPUV3 tristate "DRM Support for i.MX IPUv3" depends on DRM_IMX + depends on DRM_IMX_IPUV3_CORE help Choose this if you have a i.MX5 or i.MX6 processor. -- cgit v1.2.3 From 8c090cfbf980581454ae4caae731574fedd7dce8 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 2 May 2013 17:16:23 +0200 Subject: staging/solo6x10: depend on CONFIG_FONTS The new SOLO6X10 driver needs the built-in console fonts, specifically the VGA8x16 font and building it without console support results in a link error error. drivers/built-in.o: In function `solo_osd_print': :(.text+0x7d3424): undefined reference to `find_font' This adds a dependency on the CONFIG_FONTS symbol and changes the console code to always build the base driver even if there are no specific fonts built-in. Cc: Greg Kroah-Hartman Cc: Hans Verkuil Cc: Mauro Carvalho Chehab Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/staging/media/solo6x10/Kconfig | 1 + drivers/video/console/Makefile | 2 ++ 2 files changed, 3 insertions(+) diff --git a/drivers/staging/media/solo6x10/Kconfig b/drivers/staging/media/solo6x10/Kconfig index ec32776ff547..df6569b997b8 100644 --- a/drivers/staging/media/solo6x10/Kconfig +++ b/drivers/staging/media/solo6x10/Kconfig @@ -1,6 +1,7 @@ config SOLO6X10 tristate "Softlogic 6x10 MPEG codec cards" depends on PCI && VIDEO_DEV && SND && I2C + depends on FONTS select VIDEOBUF2_DMA_SG select VIDEOBUF2_DMA_CONTIG select SND_PCM diff --git a/drivers/video/console/Makefile b/drivers/video/console/Makefile index a862e9173ebe..48da25c96cd3 100644 --- a/drivers/video/console/Makefile +++ b/drivers/video/console/Makefile @@ -18,6 +18,8 @@ font-objs-$(CONFIG_FONT_MINI_4x6) += font_mini_4x6.o font-objs += $(font-objs-y) +obj-$(CONFIG_FONTS) += font.o + # Each configuration option enables a list of files. obj-$(CONFIG_DUMMY_CONSOLE) += dummycon.o -- cgit v1.2.3 From 410b6372d780da3e3594bc107139af9d049d3ac5 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 May 2013 22:56:15 +0200 Subject: staging: zcache: Fix incorrect module_param_array types MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/staging/zcache/zcache-main.c: In function ‘__check_disable_cleancache’: drivers/staging/zcache/zcache-main.c:1928: warning: return from incompatible pointer type drivers/staging/zcache/zcache-main.c: In function ‘__check_disable_frontswap’: drivers/staging/zcache/zcache-main.c:1929: warning: return from incompatible pointer type drivers/staging/zcache/zcache-main.c: In function ‘__check_disable_frontswap_ignore_nonactive’: drivers/staging/zcache/zcache-main.c:1933: warning: return from incompatible pointer type Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zcache/zcache-main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c index 522cb8e55142..dcceed29d31a 100644 --- a/drivers/staging/zcache/zcache-main.c +++ b/drivers/staging/zcache/zcache-main.c @@ -1922,15 +1922,15 @@ out: #ifdef CONFIG_ZCACHE_MODULE #ifdef CONFIG_RAMSTER -module_param(ramster_enabled, int, S_IRUGO); +module_param(ramster_enabled, bool, S_IRUGO); module_param(disable_frontswap_selfshrink, int, S_IRUGO); #endif -module_param(disable_cleancache, int, S_IRUGO); -module_param(disable_frontswap, int, S_IRUGO); +module_param(disable_cleancache, bool, S_IRUGO); +module_param(disable_frontswap, bool, S_IRUGO); #ifdef FRONTSWAP_HAS_EXCLUSIVE_GETS module_param(frontswap_has_exclusive_gets, bool, S_IRUGO); #endif -module_param(disable_frontswap_ignore_nonactive, int, S_IRUGO); +module_param(disable_frontswap_ignore_nonactive, bool, S_IRUGO); module_param(zcache_comp_name, charp, S_IRUGO); module_init(zcache_init); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From bd471258f2e0911f29d5dc3e1689de35518a157a Mon Sep 17 00:00:00 2001 From: Xiong Zhou Date: Wed, 8 May 2013 18:52:48 +0800 Subject: staging: android: logger: use kuid_t instead of uid_t Use kuid_t instead of uid_t, to pass the UIDGID_STRICT_TYPE_CHECKS. Signed-off-by: Xiong Zhou Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/logger.c | 4 ++-- drivers/staging/android/logger.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/android/logger.c b/drivers/staging/android/logger.c index b040200a5a55..9bd874789ce5 100644 --- a/drivers/staging/android/logger.c +++ b/drivers/staging/android/logger.c @@ -242,7 +242,7 @@ static ssize_t do_read_log_to_user(struct logger_log *log, * 'log->buffer' which contains the first entry readable by 'euid' */ static size_t get_next_entry_by_uid(struct logger_log *log, - size_t off, uid_t euid) + size_t off, kuid_t euid) { while (off != log->w_off) { struct logger_entry *entry; @@ -251,7 +251,7 @@ static size_t get_next_entry_by_uid(struct logger_log *log, entry = get_entry_header(log, off, &scratch); - if (entry->euid == euid) + if (uid_eq(entry->euid, euid)) return off; next_len = sizeof(struct logger_entry) + entry->len; diff --git a/drivers/staging/android/logger.h b/drivers/staging/android/logger.h index cc6bbd99c8e0..70af7d805dff 100644 --- a/drivers/staging/android/logger.h +++ b/drivers/staging/android/logger.h @@ -66,7 +66,7 @@ struct logger_entry { __s32 tid; __s32 sec; __s32 nsec; - uid_t euid; + kuid_t euid; char msg[0]; }; -- cgit v1.2.3 From 2ea86d5ac6f5c850d719aa79de12c9af53bb244b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 16 May 2013 15:18:29 +0200 Subject: staging: Swap zram and zsmalloc in Kconfig ZRAM support depends on ZSMALLOC so present ZSMALLOC to the user first. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/staging/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 4e8a1794f50a..aefe820a8005 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -72,10 +72,10 @@ source "drivers/staging/sep/Kconfig" source "drivers/staging/iio/Kconfig" -source "drivers/staging/zram/Kconfig" - source "drivers/staging/zsmalloc/Kconfig" +source "drivers/staging/zram/Kconfig" + source "drivers/staging/wlags49_h2/Kconfig" source "drivers/staging/wlags49_h25/Kconfig" -- cgit v1.2.3 From 3993eff9da7cac9749ba2b5812873d3a903dfd8c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 3 May 2013 08:52:32 +0100 Subject: mfd: ab8500: Debugfs code depends on gpadc The AB8500_DEBUG code specifically requires access to the gpadc code, not just the common ab8500 driver. drivers/built-in.o: In function `ab8500_gpadc_bat_ctrl_print': mfd/ab8500-debugfs.c:1733: undefined reference to `ab8500_gpadc_get' mfd/ab8500-debugfs.c:1734: undefined reference to `ab8500_gpadc_read_raw' mfd/ab8500-debugfs.c:1736: undefined reference to `ab8500_gpadc_ad_to_voltage' Signed-off-by: Arnd Bergmann Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 5ea1f8ca8648..d54e985748b7 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -579,7 +579,7 @@ config AB8500_CORE config AB8500_DEBUG bool "Enable debug info via debugfs" - depends on AB8500_CORE && DEBUG_FS + depends on AB8500_GPADC && DEBUG_FS default y if DEBUG_FS help Select this option if you want debug information using the debug -- cgit v1.2.3 From 194bd7cf1d19aac8da116ed3137c3a3cf622572b Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Fri, 26 Apr 2013 14:17:14 +0200 Subject: mfd: abx500-core: Fix sparse warning Fix sparse warning: drivers/mfd/abx500-core.c:159:38: warning: Using plain integer as NULL pointer Acked-by: Linus Walleij Signed-off-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- drivers/mfd/abx500-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/abx500-core.c b/drivers/mfd/abx500-core.c index 9818afba2515..3714acb61458 100644 --- a/drivers/mfd/abx500-core.c +++ b/drivers/mfd/abx500-core.c @@ -156,7 +156,7 @@ EXPORT_SYMBOL(abx500_startup_irq_enabled); void abx500_dump_all_banks(void) { struct abx500_ops *ops; - struct device dummy_child = {0}; + struct device dummy_child = {NULL}; struct abx500_device_entry *dev_entry; list_for_each_entry(dev_entry, &abx500_list, list) { -- cgit v1.2.3 From 3d2088a14d949651f8b799d425ecbd684e35348b Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Fri, 26 Apr 2013 14:17:15 +0200 Subject: mfd: ab8500-sysctrl: Fix sparse warning Fix sparse warning: drivers/mfd/ab8500-sysctrl.c:26:6: warning: symbol 'ab8500_power_off' was not declared. Should it be static? Acked-by: Linus Walleij Signed-off-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-sysctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index fbca1ced49fa..640495e07144 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -23,7 +23,7 @@ static struct device *sysctrl_dev; -void ab8500_power_off(void) +static void ab8500_power_off(void) { sigset_t old; sigset_t all; -- cgit v1.2.3 From 9f7af61a93fc96ae7e55d6a292f5cc7decba5ad2 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Fri, 26 Apr 2013 14:17:17 +0200 Subject: mfd: ab8500-sysctrl: Set sysctrl_dev during probe The driver requires sysctrl_dev to be set at probe, as it's used by other driver functions. This was dropped by mistake in: 2377e52 mfd: ab8500-sysctrl: Error check clean up making all driver functions fail. Acked-by: Linus Walleij Signed-off-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-sysctrl.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index 640495e07144..b851692b0755 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -191,6 +191,8 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev) if (!(plat && plat->sysctrl)) return -EINVAL; + sysctrl_dev = &pdev->dev; + if (plat->pm_power_off) pm_power_off = ab8500_power_off; -- cgit v1.2.3 From 33a0d1907fb442cd59b8e2eb83be79c4ab1cb791 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 2 May 2013 15:46:34 +0100 Subject: mfd: ab8500-gpadc: Suppress 'ignoring regulator_enable() return value' warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/mfd/ab8500-gpadc.c: In function ‘ab8500_gpadc_resume’: drivers/mfd/ab8500-gpadc.c:911:18: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result [-Wunused-result] Acked-by: Linus Walleij Acked-by: Srinidhi Kasagar Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-gpadc.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index 5e65b28a5d09..13f7866de46e 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -907,14 +907,17 @@ static int ab8500_gpadc_suspend(struct device *dev) static int ab8500_gpadc_resume(struct device *dev) { struct ab8500_gpadc *gpadc = dev_get_drvdata(dev); + int ret; - regulator_enable(gpadc->regu); + ret = regulator_enable(gpadc->regu); + if (ret) + dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret); pm_runtime_mark_last_busy(gpadc->dev); pm_runtime_put_autosuspend(gpadc->dev); mutex_unlock(&gpadc->ab8500_gpadc_lock); - return 0; + return ret; } static int ab8500_gpadc_probe(struct platform_device *pdev) -- cgit v1.2.3 From 6999181eecb11863b78030c68037a9f851522735 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 12 Apr 2013 17:02:09 +0200 Subject: mfd: ab8500: Pass AB8500 IRQ to debugfs code by resource The AB8500 debug code which was merged in parallell with the multiplatform work incidentally introduced a new instance using the header which is now deleted, causing this build regression: drivers/mfd/ab8500-debugfs.c:95:23: fatal error: mach/irqs.h: No such file or directory compilation terminated. make[4]: *** [drivers/mfd/ab8500-debugfs.o] Error 1 The code most certainly never worked with device tree either since that does not rely on this kind of hard-coded interrupt numbers. Fix the problem at the root by passing it as a named resource from the ab8500-core driver. Use an untyped resource to stop the MFD core from remapping this IRQ relative to the AB8500 irqdomain. Signed-off-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 15 +++++++++++++++ drivers/mfd/ab8500-debugfs.c | 16 ++++++++++++---- 2 files changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 8e8a016effe9..65cd46bbe336 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -867,6 +867,15 @@ static struct resource ab8500_chargalg_resources[] = {}; #ifdef CONFIG_DEBUG_FS static struct resource ab8500_debug_resources[] = { + { + .name = "IRQ_AB8500", + /* + * Number will be filled in. NOTE: this is deliberately + * not flagged as an IRQ in ordet to avoid remapping using + * the irqdomain in the MFD core, so that this IRQ passes + * unremapped to the debug code. + */ + }, { .name = "IRQ_FIRST", .start = AB8500_INT_MAIN_EXT_CH_NOT_OK, @@ -1712,6 +1721,12 @@ static int ab8500_probe(struct platform_device *pdev) if (ret) return ret; +#if CONFIG_DEBUG_FS + /* Pass to debugfs */ + ab8500_debug_resources[0].start = ab8500->irq; + ab8500_debug_resources[0].end = ab8500->irq; +#endif + if (is_ab9540(ab8500)) ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs, ARRAY_SIZE(ab9540_devs), NULL, diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index b88bbbc15f1e..37b7ce4c7c3b 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -91,12 +91,10 @@ #include #endif -/* TODO: this file should not reference IRQ_DB8500_AB8500! */ -#include - static u32 debug_bank; static u32 debug_address; +static int irq_ab8500; static int irq_first; static int irq_last; static u32 *irq_count; @@ -1589,7 +1587,7 @@ void ab8500_debug_register_interrupt(int line) { if (line < num_interrupt_lines) { num_interrupts[line]++; - if (suspend_test_wake_cause_interrupt_is_mine(IRQ_DB8500_AB8500)) + if (suspend_test_wake_cause_interrupt_is_mine(irq_ab8500)) num_wake_interrupts[line]++; } } @@ -2941,6 +2939,7 @@ static int ab8500_debug_probe(struct platform_device *plf) struct dentry *file; int ret = -ENOMEM; struct ab8500 *ab8500; + struct resource *res; debug_bank = AB8500_MISC; debug_address = AB8500_REV_REG & 0x00FF; @@ -2959,6 +2958,15 @@ static int ab8500_debug_probe(struct platform_device *plf) if (!event_name) goto out_freedev_attr; + res = platform_get_resource_byname(plf, 0, "IRQ_AB8500"); + if (!res) { + dev_err(&plf->dev, "AB8500 irq not found, err %d\n", + irq_first); + ret = -ENXIO; + goto out_freeevent_name; + } + irq_ab8500 = res->start; + irq_first = platform_get_irq_byname(plf, "IRQ_FIRST"); if (irq_first < 0) { dev_err(&plf->dev, "First irq not found, err %d\n", -- cgit v1.2.3 From eb696c3181dd5b2266794776519120abdfe127d9 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 7 May 2013 11:29:55 +0100 Subject: mfd: ab8500-core: Use the correct driver name when enabling gpio/pinctrl When we're using Device Tree to enable GPIO drivers we're forced to be OS agnostic, thus we are forbidden use names like pinctrl as they are specific only to Linux, at least for the time being. However, when we are registering devices using internal systems such as MFD or platform registration, we can use such terminology. In this case we can and should use the platform device ID mechanism to specify which device we wish to utilise by detailing pinctrl-. This patch fixes a regression that when booting with Device Tree enabled the ABx500 GPIO/Pinctrl devices are not probed. Acked-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 65cd46bbe336..1183e6d6f583 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -1106,7 +1106,7 @@ static struct mfd_cell ab8500_devs[] = { .of_compatible = "stericsson,ab8500-denc", }, { - .name = "ab8500-gpio", + .name = "pinctrl-ab8500", .of_compatible = "stericsson,ab8500-gpio", }, { @@ -1243,7 +1243,7 @@ static struct mfd_cell ab8505_devs[] = { .name = "ab8500-leds", }, { - .name = "ab8500-gpio", + .name = "pinctrl-ab8505", }, { .name = "ab8500-usb", @@ -1311,7 +1311,7 @@ static struct mfd_cell ab8540_devs[] = { .resources = ab8500_temp_resources, }, { - .name = "ab8500-gpio", + .name = "pinctrl-ab8540", }, { .name = "ab8540-usb", -- cgit v1.2.3 From a3ef0deb0fa45781ab653d7c9271e02c152076f1 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 7 May 2013 12:01:32 +0100 Subject: mfd: db8500-prcmu: Supply the pdata_size attribute for db8500-thermal The MFD subsystem requires drivers to state the size of any platform data passed, or it will fail to assign it to the device. This will culminate in a NULL platform_data attribute and normally a failure to probe() or a kernel Oops. Acked-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 319b8abe742b..5389368e0e5f 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -3095,6 +3095,7 @@ static struct mfd_cell db8500_prcmu_devs[] = { .num_resources = ARRAY_SIZE(db8500_thsens_resources), .resources = db8500_thsens_resources, .platform_data = &db8500_thsens_data, + .pdata_size = sizeof(db8500_thsens_data), }, }; -- cgit v1.2.3 From 955de2eab3fd89bc6d5735817710926ba5817450 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:09 +0100 Subject: mfd: ab8500-core: Pass GPADC compatible string to MFD core When booting with Device Tree enabled the MFD core uses each device's compatible string to find and allocate its associated of_node pointer, which in turn is passed to the driver via the platform_device struct. Without it, the driver won't be able to interrogate the Device Tree or locate suitable regulators and will most likely fail to probe. Acked-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 1183e6d6f583..258b367e3989 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -1060,6 +1060,7 @@ static struct mfd_cell ab8500_devs[] = { }, { .name = "ab8500-gpadc", + .of_compatible = "stericsson,ab8500-gpadc", .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), .resources = ab8500_gpadc_resources, }, @@ -1217,6 +1218,7 @@ static struct mfd_cell ab8505_devs[] = { }, { .name = "ab8500-gpadc", + .of_compatible = "stericsson,ab8500-gpadc", .num_resources = ARRAY_SIZE(ab8505_gpadc_resources), .resources = ab8505_gpadc_resources, }, @@ -1280,6 +1282,7 @@ static struct mfd_cell ab8540_devs[] = { }, { .name = "ab8500-gpadc", + .of_compatible = "stericsson,ab8500-gpadc", .num_resources = ARRAY_SIZE(ab8505_gpadc_resources), .resources = ab8505_gpadc_resources, }, -- cgit v1.2.3 From 0b8ebdb18888c55588b932f4f564b9c9529de627 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Thu, 9 May 2013 13:08:08 +0200 Subject: mfd: ab8500-sysctrl: Always enable pm_power_off handler AB8500 sysctrl driver implements a pm_power_off handler, but that is currently not registered until a specific platform data field is enabled. This patch drops the platform data field and always registers ab8500_power_off if no other pm_power_off handler was defined before, and also introduces the necessary cleanup code in the driver's remove function. Acked-by: Linus Walleij Signed-off-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-sysctrl.c | 6 +++++- include/linux/mfd/abx500/ab8500.h | 2 -- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index b851692b0755..0c20361eae26 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -193,7 +193,7 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev) sysctrl_dev = &pdev->dev; - if (plat->pm_power_off) + if (!pm_power_off) pm_power_off = ab8500_power_off; pdata = plat->sysctrl; @@ -228,6 +228,10 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev) static int ab8500_sysctrl_remove(struct platform_device *pdev) { sysctrl_dev = NULL; + + if (pm_power_off == ab8500_power_off) + pm_power_off = NULL; + return 0; } diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index fb1bf7d6a410..0390d5943ed6 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -373,13 +373,11 @@ struct ab8500_sysctrl_platform_data; /** * struct ab8500_platform_data - AB8500 platform data * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used - * @pm_power_off: Should machine pm power off hook be registered or not * @init: board-specific initialization after detection of ab8500 * @regulator: machine-specific constraints for regulators */ struct ab8500_platform_data { int irq_base; - bool pm_power_off; void (*init) (struct ab8500 *); struct ab8500_regulator_platform_data *regulator; struct abx500_gpio_platform_data *gpio; -- cgit v1.2.3 From e9d7b4b5691cac4dce6c5eed9e217e50e24edef7 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Tue, 14 May 2013 15:14:55 +0200 Subject: mfd: db8500-prcmu: Update stored DSI PLL divider value Previously the DSI PLL divider rate was initialised statically and assumed to be 1. Before the common clock framework was enabled for ux500, a call to clk_set_rate() would always update the HW registers no matter what the current setting was. This patch makes sure the actual hw settings and the sw assumed settings are matched. Signed-off-by: Paer-Olof Haakansson Signed-off-by: Ulf Hansson signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 5389368e0e5f..66f80973596b 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -1613,6 +1613,8 @@ static unsigned long dsiclk_rate(u8 n) if (divsel == PRCM_DSI_PLLOUT_SEL_OFF) divsel = dsiclk[n].divsel; + else + dsiclk[n].divsel = divsel; switch (divsel) { case PRCM_DSI_PLLOUT_SEL_PHI_4: -- cgit v1.2.3 From 91ec61f8f01cf32868e2ed2fa96a299e77964055 Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Wed, 15 May 2013 01:44:25 +0100 Subject: staging: vt6656: [bug] Fix missing spin lock in iwctl_siwpower. Fixes occasional dead lock on power up / down. spin_lock_irq is used because of unlocking with spin_unlock_irq elsewhere in the driver. Only relevant to kernels 3.8 and later when command was transferred to the iw_handler. Signed-off-by: Malcolm Priestley Cc: stable@vger.kernel.org # 3.8+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6656/iwctl.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/staging/vt6656/iwctl.c b/drivers/staging/vt6656/iwctl.c index c335808211ee..d0cf7d8a20e5 100644 --- a/drivers/staging/vt6656/iwctl.c +++ b/drivers/staging/vt6656/iwctl.c @@ -1345,9 +1345,12 @@ int iwctl_siwpower(struct net_device *dev, struct iw_request_info *info, return rc; } + spin_lock_irq(&pDevice->lock); + if (wrq->disabled) { pDevice->ePSMode = WMAC_POWER_CAM; PSvDisablePowerSaving(pDevice); + spin_unlock_irq(&pDevice->lock); return rc; } if ((wrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { @@ -1358,6 +1361,9 @@ int iwctl_siwpower(struct net_device *dev, struct iw_request_info *info, pDevice->ePSMode = WMAC_POWER_FAST; PSvEnablePowerSaving((void *)pDevice, pMgmt->wListenInterval); } + + spin_unlock_irq(&pDevice->lock); + switch (wrq->flags & IW_POWER_MODE) { case IW_POWER_UNICAST_R: DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWPOWER: IW_POWER_UNICAST_R \n"); -- cgit v1.2.3 From 7c8bfed7aaeba690de30835fe89882e1047a55fd Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Fri, 26 Apr 2013 13:25:01 -0700 Subject: usb, chipidea: fix link error when USB_EHCI_HCD is a module Fixes link error when USB_EHCI_HCD=m and USB_CHIPIDEA_HOST=y: drivers/built-in.o: In function `ci_hdrc_host_init': drivers/usb/chipidea/host.c:104: undefined reference to `ehci_init_driver' as a result of commit 09f6ffde2ece ("USB: EHCI: fix build error by making ChipIdea host a normal EHCI driver"). Cc: stable@vger.kernel.org [v3.7+] Signed-off-by: David Rientjes Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 608a2aeb400c..b2df442eb3e5 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -20,7 +20,7 @@ config USB_CHIPIDEA_UDC config USB_CHIPIDEA_HOST bool "ChipIdea host controller" depends on USB=y || USB=USB_CHIPIDEA - depends on USB_EHCI_HCD + depends on USB_EHCI_HCD=y select USB_EHCI_ROOT_HUB_TT help Say Y here to enable host controller functionality of the -- cgit v1.2.3 From 1c9e55cda44d770ce4e519f9672a4f11e87a2160 Mon Sep 17 00:00:00 2001 From: Wei WANG Date: Sat, 27 Apr 2013 10:49:13 +0800 Subject: USB: usb-stor: realtek_cr: Fix compile error To fix the compile error when CONFIG_PM_RUNTIME is not enabled, move the declaration of us out of CONFIG_REALTEK_AUTOPM macro in rts51x_chip. drivers/usb/storage/realtek_cr.c: In function 'realtek_cr_destructor': drivers/usb/storage/realtek_cr.c:942:11: error: 'struct rts51x_chip' has no member named 'us' Signed-off-by: Wei WANG Reported-by: Randy Dunlap Acked-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/realtek_cr.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 8623577bbbe7..281be56d5648 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -105,8 +105,9 @@ struct rts51x_chip { int status_len; u32 flag; -#ifdef CONFIG_REALTEK_AUTOPM struct us_data *us; + +#ifdef CONFIG_REALTEK_AUTOPM struct timer_list rts51x_suspend_timer; unsigned long timer_expires; int pwr_state; @@ -988,6 +989,7 @@ static int init_realtek_cr(struct us_data *us) us->extra = chip; us->extra_destructor = realtek_cr_destructor; us->max_lun = chip->max_lun = rts51x_get_max_lun(us); + chip->us = us; usb_stor_dbg(us, "chip->max_lun = %d\n", chip->max_lun); @@ -1010,10 +1012,8 @@ static int init_realtek_cr(struct us_data *us) SET_AUTO_DELINK(chip); } #ifdef CONFIG_REALTEK_AUTOPM - if (ss_en) { - chip->us = us; + if (ss_en) realtek_cr_autosuspend_setup(us); - } #endif usb_stor_dbg(us, "chip->flag = 0x%x\n", chip->flag); -- cgit v1.2.3 From bac6b03275184c912ad0818c9a0a736847804dca Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 30 Apr 2013 10:18:04 +0200 Subject: USB: reset resume quirk needed by a hub Werner Fink has reported problems with this hub. Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index ab5638d9c707..a63598895077 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -88,6 +88,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Edirol SD-20 */ { USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Alcor Micro Corp. Hub */ + { USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME }, + /* appletouch */ { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v1.2.3 From 843e56c02d6066ad2d8615562b652ae74b452a0e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 2 May 2013 17:16:19 +0200 Subject: USB: EHCI: remove bogus #error The EHCI host controller driver can be built standalone now, without enabling any of the available bus glue drivers, so there is not really a reason to error out here: drivers/usb/host/ehci-hcd.c:1303:2: error: #error "missing bus glue for ehci-hcd" #error "missing bus glue for ehci-hcd" The alternative would be to change the Kconfig code to build the ehci-hcd module only if any of the symbols below are in fact enabled. Signed-off-by: Arnd Bergmann Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 312fc10da3c7..246e124e6ac5 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1286,23 +1286,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_hcd_sead3_driver #endif -#if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \ - !IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \ - !IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \ - !IS_ENABLED(CONFIG_USB_EHCI_MXC) && \ - !IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \ - !IS_ENABLED(CONFIG_USB_EHCI_HCD_ORION) && \ - !IS_ENABLED(CONFIG_USB_EHCI_HCD_SPEAR) && \ - !IS_ENABLED(CONFIG_USB_EHCI_S5P) && \ - !IS_ENABLED(CONFIG_USB_EHCI_HCD_AT91) && \ - !IS_ENABLED(CONFIG_USB_EHCI_MSM) && \ - !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && \ - !defined(OF_PLATFORM_DRIVER) && \ - !defined(XILINX_OF_PLATFORM_DRIVER) -#error "missing bus glue for ehci-hcd" -#endif - static int __init ehci_hcd_init(void) { int retval = 0; -- cgit v1.2.3 From 73c042df6e1bc50544842a04b777b36bbe3630e6 Mon Sep 17 00:00:00 2001 From: Teppo Kotilainen Date: Fri, 3 May 2013 10:28:12 +0300 Subject: usb: option: Add Telewell TW-LTE 4G Information from driver description files: diag: VID_19D2&PID_0412&MI_00 nmea: VID_19D2&PID_0412&MI_01 at: VID_19D2&PID_0412&MI_02 modem: VID_19D2&PID_0412&MI_03 net: VID_19D2&PID_0412&MI_04 Signed-off-by: Teppo Kotilainen Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 734372846abb..13205c5badac 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -966,6 +966,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0412, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff), -- cgit v1.2.3 From 8ff10bdb14a52e3f25d4ce09e0582a8684c1a6db Mon Sep 17 00:00:00 2001 From: Schemmel Hans-Christoph Date: Mon, 6 May 2013 11:05:12 +0200 Subject: USB: Blacklisted Cinterion's PLxx WWAN Interface /drivers/usb/serial/option.c: Blacklisted Cinterion's PLxx WWAN Interface (USB Interface 4), because it will be handled by QMI WWAN driver. Product IDs renamed. Signed-off-by: Hans-Christoph Schemmel Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 13205c5badac..d6bb98a225fa 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -341,8 +341,8 @@ static void option_instat_callback(struct urb *urb); #define CINTERION_PRODUCT_EU3_E 0x0051 #define CINTERION_PRODUCT_EU3_P 0x0052 #define CINTERION_PRODUCT_PH8 0x0053 -#define CINTERION_PRODUCT_AH6 0x0055 -#define CINTERION_PRODUCT_PLS8 0x0060 +#define CINTERION_PRODUCT_AHXX 0x0055 +#define CINTERION_PRODUCT_PLXX 0x0060 /* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c @@ -1266,8 +1266,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) }, - { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AH6) }, - { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLS8) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) }, -- cgit v1.2.3 From 3b9561e9d9b88eca9d4ed6aab025dec2eeeed501 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 7 May 2013 16:53:52 -0600 Subject: USB: set device dma_mask without reference to global data Many USB host drivers contain code such as: if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &tegra_ehci_dma_mask; ... where tegra_ehci_dma_mask is a global. I suspect this code originated in commit 4a53f4e "USB: ehci-tegra: add probing through device tree" and was simply copied everywhere else. This works fine when the code is built-in, but can cause a crash when the code is in a module. The first module load sets up the dma_mask pointer, but if the module is removed and re-inserted, the value is now non-NULL, and hence is not updated to point at the new location, and hence points at a stale location within the previous module load address, which in turn causes a crash if the pointer is de-referenced. The simplest way of solving this seems to be to copy the code from ehci-platform.c, which uses the coherent_dma_mask as the target for the dma_mask pointer. Suggested-by: Arnd Bergmann Signed-off-by: Stephen Warren Acked-by: Tony Prisk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/ci13xxx_imx.c | 15 ++++----------- drivers/usb/dwc3/dwc3-exynos.c | 6 +++--- drivers/usb/host/ehci-atmel.c | 6 +++--- drivers/usb/host/ehci-omap.c | 8 ++++---- drivers/usb/host/ehci-orion.c | 6 +++--- drivers/usb/host/ehci-s5p.c | 4 +--- drivers/usb/host/ehci-spear.c | 6 +++--- drivers/usb/host/ehci-tegra.c | 6 +++--- drivers/usb/host/ohci-at91.c | 6 +++--- drivers/usb/host/ohci-exynos.c | 4 +--- drivers/usb/host/ohci-omap3.c | 8 ++++---- drivers/usb/host/ohci-pxa27x.c | 6 +++--- drivers/usb/host/ohci-spear.c | 6 +++--- drivers/usb/host/uhci-platform.c | 6 +++--- 14 files changed, 41 insertions(+), 52 deletions(-) diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c index 8faec9dbbb84..73f9d5f15adb 100644 --- a/drivers/usb/chipidea/ci13xxx_imx.c +++ b/drivers/usb/chipidea/ci13xxx_imx.c @@ -173,17 +173,10 @@ static int ci13xxx_imx_probe(struct platform_device *pdev) ci13xxx_imx_platdata.phy = data->phy; - if (!pdev->dev.dma_mask) { - pdev->dev.dma_mask = devm_kzalloc(&pdev->dev, - sizeof(*pdev->dev.dma_mask), GFP_KERNEL); - if (!pdev->dev.dma_mask) { - ret = -ENOMEM; - dev_err(&pdev->dev, "Failed to alloc dma_mask!\n"); - goto err; - } - *pdev->dev.dma_mask = DMA_BIT_MASK(32); - dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask); - } + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); if (usbmisc_ops && usbmisc_ops->init) { ret = usbmisc_ops->init(&pdev->dev); diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index a8afe6e26621..929e7dd6e58b 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -95,8 +95,6 @@ static int dwc3_exynos_remove_child(struct device *dev, void *unused) return 0; } -static u64 dwc3_exynos_dma_mask = DMA_BIT_MASK(32); - static int dwc3_exynos_probe(struct platform_device *pdev) { struct dwc3_exynos *exynos; @@ -118,7 +116,9 @@ static int dwc3_exynos_probe(struct platform_device *pdev) * Once we move to full device tree support this will vanish off. */ if (!dev->dma_mask) - dev->dma_mask = &dwc3_exynos_dma_mask; + dev->dma_mask = &dev->coherent_dma_mask; + if (!dev->coherent_dma_mask) + dev->coherent_dma_mask = DMA_BIT_MASK(32); platform_set_drvdata(pdev, exynos); diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 66420097c242..02f4611faa62 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -63,8 +63,6 @@ static void atmel_stop_ehci(struct platform_device *pdev) /*-------------------------------------------------------------------------*/ -static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32); - static int ehci_atmel_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd; @@ -93,7 +91,9 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &at91_ehci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 3d1491b5f360..16d7150e8557 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -90,8 +90,6 @@ static const struct ehci_driver_overrides ehci_omap_overrides __initdata = { .extra_priv_size = sizeof(struct omap_hcd), }; -static u64 omap_ehci_dma_mask = DMA_BIT_MASK(32); - /** * ehci_hcd_omap_probe - initialize TI-based HCDs * @@ -146,8 +144,10 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &omap_ehci_dma_mask; + if (!dev->dma_mask) + dev->dma_mask = &dev->coherent_dma_mask; + if (!dev->coherent_dma_mask) + dev->coherent_dma_mask = DMA_BIT_MASK(32); hcd = usb_create_hcd(&ehci_omap_hc_driver, dev, dev_name(dev)); diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 54c579485150..efbc588b48c5 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -137,8 +137,6 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd, } } -static u64 ehci_orion_dma_mask = DMA_BIT_MASK(32); - static int ehci_orion_drv_probe(struct platform_device *pdev) { struct orion_ehci_data *pd = pdev->dev.platform_data; @@ -183,7 +181,9 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) * now. Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &ehci_orion_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); if (!request_mem_region(res->start, resource_size(res), ehci_orion_hc_driver.description)) { diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index 635775278c7f..a81465ed48db 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -71,8 +71,6 @@ static void s5p_setup_vbus_gpio(struct platform_device *pdev) dev_err(dev, "can't request ehci vbus gpio %d", gpio); } -static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32); - static int s5p_ehci_probe(struct platform_device *pdev) { struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; @@ -90,7 +88,7 @@ static int s5p_ehci_probe(struct platform_device *pdev) * Once we move to full device tree support this will vanish off. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &ehci_s5p_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; if (!pdev->dev.coherent_dma_mask) pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index 61ecfb3d52f5..bd3e5cbc6240 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -58,8 +58,6 @@ static int ehci_spear_drv_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend, ehci_spear_drv_resume); -static u64 spear_ehci_dma_mask = DMA_BIT_MASK(32); - static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd ; @@ -84,7 +82,9 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &spear_ehci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); usbh_clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(usbh_clk)) { diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index e3eddc31ac83..59d111bf44a9 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -637,8 +637,6 @@ static void tegra_ehci_set_phcd(struct usb_phy *x, bool enable) writel(val, base + TEGRA_USB_PORTSC1); } -static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32); - static int tegra_ehci_probe(struct platform_device *pdev) { struct resource *res; @@ -661,7 +659,9 @@ static int tegra_ehci_probe(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &tegra_ehci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); setup_vbus_gpio(pdev, pdata); diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index a0cb44f0e724..2ee1496dbc1d 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -504,8 +504,6 @@ static const struct of_device_id at91_ohci_dt_ids[] = { MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids); -static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32); - static int ohci_at91_of_init(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; @@ -522,7 +520,9 @@ static int ohci_at91_of_init(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &at91_ohci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 07592c00af26..b0b542c14e31 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -98,8 +98,6 @@ static const struct hc_driver exynos_ohci_hc_driver = { .start_port_reset = ohci_start_port_reset, }; -static u64 ohci_exynos_dma_mask = DMA_BIT_MASK(32); - static int exynos_ohci_probe(struct platform_device *pdev) { struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data; @@ -117,7 +115,7 @@ static int exynos_ohci_probe(struct platform_device *pdev) * Once we move to full device tree support this will vanish off. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &ohci_exynos_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; if (!pdev->dev.coherent_dma_mask) pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c index ddfc31427bc0..8663851c8d8e 100644 --- a/drivers/usb/host/ohci-omap3.c +++ b/drivers/usb/host/ohci-omap3.c @@ -114,8 +114,6 @@ static const struct hc_driver ohci_omap3_hc_driver = { /*-------------------------------------------------------------------------*/ -static u64 omap_ohci_dma_mask = DMA_BIT_MASK(32); - /* * configure so an HC device and id are always provided * always called with process context; sleeping is OK @@ -168,8 +166,10 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &omap_ohci_dma_mask; + if (!dev->dma_mask) + dev->dma_mask = &dev->coherent_dma_mask; + if (!dev->coherent_dma_mask) + dev->coherent_dma_mask = DMA_BIT_MASK(32); hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev, dev_name(dev)); diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index efe71f3ca477..279b2ef17411 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -282,8 +282,6 @@ static const struct of_device_id pxa_ohci_dt_ids[] = { MODULE_DEVICE_TABLE(of, pxa_ohci_dt_ids); -static u64 pxa_ohci_dma_mask = DMA_BIT_MASK(32); - static int ohci_pxa_of_init(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; @@ -298,7 +296,9 @@ static int ohci_pxa_of_init(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pxa_ohci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c index 9020bf0e2eca..3e19e0170d11 100644 --- a/drivers/usb/host/ohci-spear.c +++ b/drivers/usb/host/ohci-spear.c @@ -91,8 +91,6 @@ static const struct hc_driver ohci_spear_hc_driver = { .start_port_reset = ohci_start_port_reset, }; -static u64 spear_ohci_dma_mask = DMA_BIT_MASK(32); - static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) { const struct hc_driver *driver = &ohci_spear_hc_driver; @@ -114,7 +112,9 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &spear_ohci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); usbh_clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(usbh_clk)) { diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c index 8c4dace4b14a..f1db61ada6a8 100644 --- a/drivers/usb/host/uhci-platform.c +++ b/drivers/usb/host/uhci-platform.c @@ -60,8 +60,6 @@ static const struct hc_driver uhci_platform_hc_driver = { .hub_control = uhci_hub_control, }; -static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32); - static int uhci_hcd_platform_probe(struct platform_device *pdev) { struct usb_hcd *hcd; @@ -78,7 +76,9 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev) * Once we have dma capability bindings this can go away. */ if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &platform_uhci_dma_mask; + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!pdev->dev.coherent_dma_mask) + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev, pdev->name); -- cgit v1.2.3 From 0693196fe7bbb5e6cafd255dfce91ff6d10bc18f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 5 May 2013 20:32:27 +0200 Subject: USB: serial: add wait_until_sent operation Add wait_until_sent operation which can be used to wait for hardware buffers to drain. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 17 +++++++++++++++++ include/linux/usb/serial.h | 1 + 2 files changed, 18 insertions(+) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index cf75beb1251b..31d27686151f 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -375,6 +375,22 @@ static int serial_chars_in_buffer(struct tty_struct *tty) return count; } +static void serial_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + + dev_dbg(tty->dev, "%s\n", __func__); + + if (!port->serial->type->wait_until_sent) + return; + + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) + port->serial->type->wait_until_sent(tty, timeout); + mutex_unlock(&serial->disc_mutex); +} + static void serial_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; @@ -1191,6 +1207,7 @@ static const struct tty_operations serial_ops = { .unthrottle = serial_unthrottle, .break_ctl = serial_break, .chars_in_buffer = serial_chars_in_buffer, + .wait_until_sent = serial_wait_until_sent, .tiocmget = serial_tiocmget, .tiocmset = serial_tiocmset, .get_icount = serial_get_icount, diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index b9b0f7b4e43b..afbb7eeaac5f 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -268,6 +268,7 @@ struct usb_serial_driver { struct usb_serial_port *port, struct ktermios *old); void (*break_ctl)(struct tty_struct *tty, int break_state); int (*chars_in_buffer)(struct tty_struct *tty); + void (*wait_until_sent)(struct tty_struct *tty, long timeout); void (*throttle)(struct tty_struct *tty); void (*unthrottle)(struct tty_struct *tty); int (*tiocmget)(struct tty_struct *tty); -- cgit v1.2.3 From dcf0105039660e951dfea348d317043d17988dfc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 8 May 2013 17:51:43 +0200 Subject: USB: serial: add generic wait_until_sent implementation Add generic wait_until_sent implementation which polls for empty hardware buffers using the new port-operation tx_empty. The generic implementation will be used for all sub-drivers that implement tx_empty but does not define wait_until_sent. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/generic.c | 31 +++++++++++++++++++++++++++++++ drivers/usb/serial/usb-serial.c | 2 ++ include/linux/usb/serial.h | 3 +++ 3 files changed, 36 insertions(+) diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 297665fdd16d..ba45170c78e5 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -253,6 +253,37 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty) } EXPORT_SYMBOL_GPL(usb_serial_generic_chars_in_buffer); +void usb_serial_generic_wait_until_sent(struct tty_struct *tty, long timeout) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned int bps; + unsigned long period; + unsigned long expire; + + bps = tty_get_baud_rate(tty); + if (!bps) + bps = 9600; /* B0 */ + /* + * Use a poll-period of roughly the time it takes to send one + * character or at least one jiffy. + */ + period = max_t(unsigned long, (10 * HZ / bps), 1); + period = min_t(unsigned long, period, timeout); + + dev_dbg(&port->dev, "%s - timeout = %u ms, period = %u ms\n", + __func__, jiffies_to_msecs(timeout), + jiffies_to_msecs(period)); + expire = jiffies + timeout; + while (!port->serial->type->tx_empty(port)) { + schedule_timeout_interruptible(period); + if (signal_pending(current)) + break; + if (time_after(jiffies, expire)) + break; + } +} +EXPORT_SYMBOL_GPL(usb_serial_generic_wait_until_sent); + static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port, int index, gfp_t mem_flags) { diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 31d27686151f..60caf9cb99f4 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1333,6 +1333,8 @@ static void usb_serial_operations_init(struct usb_serial_driver *device) set_to_generic_if_null(device, close); set_to_generic_if_null(device, write_room); set_to_generic_if_null(device, chars_in_buffer); + if (device->tx_empty) + set_to_generic_if_null(device, wait_until_sent); set_to_generic_if_null(device, read_bulk_callback); set_to_generic_if_null(device, write_bulk_callback); set_to_generic_if_null(device, process_read_urb); diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index afbb7eeaac5f..302ddf55d2da 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -269,6 +269,7 @@ struct usb_serial_driver { void (*break_ctl)(struct tty_struct *tty, int break_state); int (*chars_in_buffer)(struct tty_struct *tty); void (*wait_until_sent)(struct tty_struct *tty, long timeout); + bool (*tx_empty)(struct usb_serial_port *port); void (*throttle)(struct tty_struct *tty); void (*unthrottle)(struct tty_struct *tty); int (*tiocmget)(struct tty_struct *tty); @@ -328,6 +329,8 @@ extern void usb_serial_generic_close(struct usb_serial_port *port); extern int usb_serial_generic_resume(struct usb_serial *serial); extern int usb_serial_generic_write_room(struct tty_struct *tty); extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty); +extern void usb_serial_generic_wait_until_sent(struct tty_struct *tty, + long timeout); extern void usb_serial_generic_read_bulk_callback(struct urb *urb); extern void usb_serial_generic_write_bulk_callback(struct urb *urb); extern void usb_serial_generic_throttle(struct tty_struct *tty); -- cgit v1.2.3 From c4133648bbce9e6b425a74cc890c8e4df51acaa9 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 5 May 2013 20:32:29 +0200 Subject: USB: ftdi_sio: clean up get_modem_status Use usb-serial port rather than tty as argument to get_modem_status. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 242b5776648a..1159fd4cd94d 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -925,7 +925,7 @@ static int ftdi_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void ftdi_break_ctl(struct tty_struct *tty, int break_state); static int ftdi_chars_in_buffer(struct tty_struct *tty); -static int ftdi_get_modem_status(struct tty_struct *tty, +static int ftdi_get_modem_status(struct usb_serial_port *port, unsigned char status[2]); static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base); @@ -2068,7 +2068,7 @@ static int ftdi_chars_in_buffer(struct tty_struct *tty) goto out; /* Check if hardware buffer is empty. */ - ret = ftdi_get_modem_status(tty, buf); + ret = ftdi_get_modem_status(port, buf); if (ret == 2) { if (!(buf[1] & FTDI_RS_TEMT)) chars = 1; @@ -2268,10 +2268,9 @@ no_c_cflag_changes: * Returns the number of status bytes retrieved (device dependant), or * negative error code. */ -static int ftdi_get_modem_status(struct tty_struct *tty, +static int ftdi_get_modem_status(struct usb_serial_port *port, unsigned char status[2]) { - struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); unsigned char *buf; int len; @@ -2336,7 +2335,7 @@ static int ftdi_tiocmget(struct tty_struct *tty) unsigned char buf[2]; int ret; - ret = ftdi_get_modem_status(tty, buf); + ret = ftdi_get_modem_status(port, buf); if (ret < 0) return ret; -- cgit v1.2.3 From a37025b5c702aaf87191cd75fcc42c54454f16f5 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 5 May 2013 20:32:30 +0200 Subject: USB: ftdi_sio: fix chars_in_buffer overhead Use the new generic usb-serial wait_until_sent implementation to wait for hardware buffers to drain. This removes the need to check the hardware buffers in chars_in_buffer and thus removes the overhead introduced by commit 6f602912 ("usb: serial: ftdi_sio: Add missing chars_in_buffer function") without breaking tty_wait_until_sent (used by, for example, tcdrain, tcsendbreak and close). Reported-by: Stas Sergeev Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 1159fd4cd94d..a62a75a679cd 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -924,7 +924,7 @@ static int ftdi_tiocmset(struct tty_struct *tty, static int ftdi_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void ftdi_break_ctl(struct tty_struct *tty, int break_state); -static int ftdi_chars_in_buffer(struct tty_struct *tty); +static bool ftdi_tx_empty(struct usb_serial_port *port); static int ftdi_get_modem_status(struct usb_serial_port *port, unsigned char status[2]); @@ -961,7 +961,7 @@ static struct usb_serial_driver ftdi_sio_device = { .ioctl = ftdi_ioctl, .set_termios = ftdi_set_termios, .break_ctl = ftdi_break_ctl, - .chars_in_buffer = ftdi_chars_in_buffer, + .tx_empty = ftdi_tx_empty, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -2056,27 +2056,18 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state) } -static int ftdi_chars_in_buffer(struct tty_struct *tty) +static bool ftdi_tx_empty(struct usb_serial_port *port) { - struct usb_serial_port *port = tty->driver_data; - int chars; unsigned char buf[2]; int ret; - chars = usb_serial_generic_chars_in_buffer(tty); - if (chars) - goto out; - - /* Check if hardware buffer is empty. */ ret = ftdi_get_modem_status(port, buf); if (ret == 2) { if (!(buf[1] & FTDI_RS_TEMT)) - chars = 1; + return false; } -out: - dev_dbg(&port->dev, "%s - %d\n", __func__, chars); - return chars; + return true; } /* old_termios contains the original termios settings and tty->termios contains -- cgit v1.2.3 From b16634adce951a7371be931487034f7365971ed0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 5 May 2013 20:32:31 +0200 Subject: USB: io_ti: fix chars_in_buffer overhead Use the new generic usb-serial wait_until_sent implementation to wait for hardware buffers to drain. This removes the need to check the hardware buffers in chars_in_buffer and thus removes the overhead introduced by commit 263e1f9f ("USB: io_ti: query hardware-buffer status in chars_in_buffer") without breaking tty_wait_until_sent (used by, for example, tcdrain, tcsendbreak and close). Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_ti.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 158bf4bc29cc..1be6ba7bee27 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2019,8 +2019,6 @@ static int edge_chars_in_buffer(struct tty_struct *tty) struct edgeport_port *edge_port = usb_get_serial_port_data(port); int chars = 0; unsigned long flags; - int ret; - if (edge_port == NULL) return 0; @@ -2028,16 +2026,22 @@ static int edge_chars_in_buffer(struct tty_struct *tty) chars = kfifo_len(&edge_port->write_fifo); spin_unlock_irqrestore(&edge_port->ep_lock, flags); - if (!chars) { - ret = tx_active(edge_port); - if (ret > 0) - chars = ret; - } - dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } +static bool edge_tx_empty(struct usb_serial_port *port) +{ + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + int ret; + + ret = tx_active(edge_port); + if (ret > 0) + return false; + + return true; +} + static void edge_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; @@ -2557,6 +2561,7 @@ static struct usb_serial_driver edgeport_1port_device = { .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, + .tx_empty = edge_tx_empty, .break_ctl = edge_break, .read_int_callback = edge_interrupt_callback, .read_bulk_callback = edge_bulk_in_callback, @@ -2589,6 +2594,7 @@ static struct usb_serial_driver edgeport_2port_device = { .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, + .tx_empty = edge_tx_empty, .break_ctl = edge_break, .read_int_callback = edge_interrupt_callback, .read_bulk_callback = edge_bulk_in_callback, -- cgit v1.2.3 From ff93b19eed0d5c124ee7168650a8e2e120ac8ea4 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 5 May 2013 20:32:32 +0200 Subject: USB: ti_usb_3410_5052: fix chars_in_buffer overhead Use the new generic usb-serial wait_until_sent implementation to wait for hardware buffers to drain. This removes the need to check the hardware buffers in chars_in_buffer and thus removes the overhead introduced by commit 2c992cd73 ("USB: ti_usb_3410_5052: query hardware-buffer status in chars_in_buffer") without breaking tty_wait_until_sent (used by, for example, tcdrain, tcsendbreak and close). Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ti_usb_3410_5052.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index cac47aef2918..c92c5ed4e580 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -101,6 +101,7 @@ static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *data, int count); static int ti_write_room(struct tty_struct *tty); static int ti_chars_in_buffer(struct tty_struct *tty); +static bool ti_tx_empty(struct usb_serial_port *port); static void ti_throttle(struct tty_struct *tty); static void ti_unthrottle(struct tty_struct *tty); static int ti_ioctl(struct tty_struct *tty, @@ -222,6 +223,7 @@ static struct usb_serial_driver ti_1port_device = { .write = ti_write, .write_room = ti_write_room, .chars_in_buffer = ti_chars_in_buffer, + .tx_empty = ti_tx_empty, .throttle = ti_throttle, .unthrottle = ti_unthrottle, .ioctl = ti_ioctl, @@ -253,6 +255,7 @@ static struct usb_serial_driver ti_2port_device = { .write = ti_write, .write_room = ti_write_room, .chars_in_buffer = ti_chars_in_buffer, + .tx_empty = ti_tx_empty, .throttle = ti_throttle, .unthrottle = ti_unthrottle, .ioctl = ti_ioctl, @@ -684,8 +687,6 @@ static int ti_chars_in_buffer(struct tty_struct *tty) struct ti_port *tport = usb_get_serial_port_data(port); int chars = 0; unsigned long flags; - int ret; - u8 lsr; if (tport == NULL) return 0; @@ -694,16 +695,22 @@ static int ti_chars_in_buffer(struct tty_struct *tty) chars = kfifo_len(&tport->write_fifo); spin_unlock_irqrestore(&tport->tp_lock, flags); - if (!chars) { - ret = ti_get_lsr(tport, &lsr); - if (!ret && !(lsr & TI_LSR_TX_EMPTY)) - chars = 1; - } - dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } +static bool ti_tx_empty(struct usb_serial_port *port) +{ + struct ti_port *tport = usb_get_serial_port_data(port); + int ret; + u8 lsr; + + ret = ti_get_lsr(tport, &lsr); + if (!ret && !(lsr & TI_LSR_TX_EMPTY)) + return false; + + return true; +} static void ti_throttle(struct tty_struct *tty) { -- cgit v1.2.3 From 4746b6c6efcdc3f5ef84f0bc2c39707c6b4e5e24 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 5 May 2013 20:32:33 +0200 Subject: USB: serial: clean up chars_in_buffer No need to grab disconnect mutex in chars_in_buffer now that no sub-driver is or should be querying hardware buffers anymore. (They should use wait_until_sent.) Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 60caf9cb99f4..4753c005cfb6 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -359,20 +359,13 @@ static int serial_chars_in_buffer(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; - int count = 0; dev_dbg(tty->dev, "%s\n", __func__); - mutex_lock(&serial->disc_mutex); - /* if the device was unplugged then any remaining characters - fell out of the connector ;) */ if (serial->disconnected) - count = 0; - else - count = serial->type->chars_in_buffer(tty); - mutex_unlock(&serial->disc_mutex); + return 0; - return count; + return serial->type->chars_in_buffer(tty); } static void serial_wait_until_sent(struct tty_struct *tty, int timeout) -- cgit v1.2.3 From 9a9ef7360e601cbe4c978742c115645e67bd6e25 Mon Sep 17 00:00:00 2001 From: Libo Chen Date: Thu, 9 May 2013 12:58:08 +0800 Subject: usb: ehci-s5p: fix memleak when fallback to pdata When devm_usb_get_phy fail, we should free hcd Signed-off-by: Libo Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-s5p.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index a81465ed48db..379037f51a2f 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -105,6 +105,7 @@ static int s5p_ehci_probe(struct platform_device *pdev) if (IS_ERR(phy)) { /* Fallback to pdata */ if (!pdata) { + usb_put_hcd(hcd); dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); return -EPROBE_DEFER; } else { -- cgit v1.2.3 From 72d9c8b68d013133b296ad8e63a30fb257351484 Mon Sep 17 00:00:00 2001 From: Libo Chen Date: Thu, 9 May 2013 12:58:09 +0800 Subject: usb: isp1760-if: fix memleak when platform_get_resource fail When platform_get_resource fail, we should release_mem_region Signed-off-by: Libo Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp1760-if.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index bbb791bd7617..a13709ee4e5d 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -373,8 +373,10 @@ static int isp1760_plat_probe(struct platform_device *pdev) irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!irq_res) { pr_warning("isp1760: IRQ resource not available\n"); - return -ENODEV; + ret = -ENODEV; + goto cleanup; } + irqflags |= irq_res->flags & IRQF_TRIGGER_MASK; if (priv) { -- cgit v1.2.3 From b3517d5de80ed7ba36977df71c437050389dca97 Mon Sep 17 00:00:00 2001 From: Libo Chen Date: Fri, 10 May 2013 14:22:42 +0800 Subject: usb: ohci: fix goto wrong tag in err case fix goto wrong tag in usb_hcd_nxp_probe Signed-off-by: Libo Chen Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-nxp.c | 46 ++++++++++++++++++++++----------------------- 1 file changed, 23 insertions(+), 23 deletions(-) diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index f4988fbe78e7..2b6149270002 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -223,8 +223,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) isp1301_i2c_client = isp1301_get_client(isp1301_node); if (!isp1301_i2c_client) { - ret = -EPROBE_DEFER; - goto out; + return -EPROBE_DEFER; } pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); @@ -234,7 +233,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) if (usb_disabled()) { dev_err(&pdev->dev, "USB is disabled\n"); ret = -ENODEV; - goto out; + goto fail_disable; } /* Enable AHB slave USB clock, needed for further USB clock control */ @@ -245,19 +244,19 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) if (IS_ERR(usb_pll_clk)) { dev_err(&pdev->dev, "failed to acquire USB PLL\n"); ret = PTR_ERR(usb_pll_clk); - goto out1; + goto fail_pll; } ret = clk_enable(usb_pll_clk); if (ret < 0) { dev_err(&pdev->dev, "failed to start USB PLL\n"); - goto out2; + goto fail_pllen; } ret = clk_set_rate(usb_pll_clk, 48000); if (ret < 0) { dev_err(&pdev->dev, "failed to set USB clock rate\n"); - goto out3; + goto fail_rate; } /* Enable USB device clock */ @@ -265,13 +264,13 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) if (IS_ERR(usb_dev_clk)) { dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n"); ret = PTR_ERR(usb_dev_clk); - goto out4; + goto fail_dev; } ret = clk_enable(usb_dev_clk); if (ret < 0) { dev_err(&pdev->dev, "failed to start USB DEV Clock\n"); - goto out5; + goto fail_deven; } /* Enable USB otg clocks */ @@ -279,7 +278,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) if (IS_ERR(usb_otg_clk)) { dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n"); ret = PTR_ERR(usb_otg_clk); - goto out6; + goto fail_otg; } __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL); @@ -287,7 +286,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) ret = clk_enable(usb_otg_clk); if (ret < 0) { dev_err(&pdev->dev, "failed to start USB DEV Clock\n"); - goto out7; + goto fail_otgen; } isp1301_configure(); @@ -296,20 +295,20 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) if (!hcd) { dev_err(&pdev->dev, "Failed to allocate HC buffer\n"); ret = -ENOMEM; - goto out8; + goto fail_hcd; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "Failed to get MEM resource\n"); ret = -ENOMEM; - goto out8; + goto fail_resource; } hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { ret = PTR_ERR(hcd->regs); - goto out8; + goto fail_resource; } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); @@ -317,7 +316,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { ret = -ENXIO; - goto out8; + goto fail_resource; } nxp_start_hc(); @@ -331,23 +330,24 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) return ret; nxp_stop_hc(); -out8: +fail_resource: usb_put_hcd(hcd); -out7: +fail_hcd: clk_disable(usb_otg_clk); -out6: +fail_otgen: clk_put(usb_otg_clk); -out5: +fail_otg: clk_disable(usb_dev_clk); -out4: +fail_deven: clk_put(usb_dev_clk); -out3: +fail_dev: +fail_rate: clk_disable(usb_pll_clk); -out2: +fail_pllen: clk_put(usb_pll_clk); -out1: +fail_pll: +fail_disable: isp1301_i2c_client = NULL; -out: return ret; } -- cgit v1.2.3 From 49c6e370dd6400b84897c4100095089b5c13a061 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 6 May 2013 16:16:44 -0500 Subject: USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card A rebranded Novatel E371 for AT&T's LTE bands. Cc: stable Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d6bb98a225fa..93d02bc4eb52 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -196,6 +196,7 @@ static void option_instat_callback(struct urb *urb); #define DELL_PRODUCT_5800_MINICARD_VZW 0x8195 /* Novatel E362 */ #define DELL_PRODUCT_5800_V2_MINICARD_VZW 0x8196 /* Novatel E362 */ +#define DELL_PRODUCT_5804_MINICARD_ATT 0x819b /* Novatel E371 */ #define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da @@ -771,6 +772,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5804_MINICARD_ATT, 0xff, 0xff, 0xff) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, -- cgit v1.2.3 From a7b594b4905828b3bfc36be39d48b5e07a23c8e1 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Tue, 30 Apr 2013 22:42:33 +0200 Subject: dummy-irq: require the user to specify an IRQ number Make sure that we let the user know that without specifying IRQ#, dummy-irq driver is useless. Reported-by: Dave Jones Signed-off-by: Jonathan Corbet Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman --- drivers/misc/dummy-irq.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/misc/dummy-irq.c b/drivers/misc/dummy-irq.c index 7014167e2c61..c37eeedfe215 100644 --- a/drivers/misc/dummy-irq.c +++ b/drivers/misc/dummy-irq.c @@ -19,7 +19,7 @@ #include #include -static int irq; +static int irq = -1; static irqreturn_t dummy_interrupt(int irq, void *dev_id) { @@ -36,6 +36,10 @@ static irqreturn_t dummy_interrupt(int irq, void *dev_id) static int __init dummy_irq_init(void) { + if (irq < 0) { + printk(KERN_ERR "dummy-irq: no IRQ given. Use irq=N\n"); + return -EIO; + } if (request_irq(irq, &dummy_interrupt, IRQF_SHARED, "dummy_irq", &irq)) { printk(KERN_ERR "dummy-irq: cannot register IRQ %d\n", irq); return -EIO; -- cgit v1.2.3 From 221ba151731133c8b0e1cdb9bfd2a45b3ba8764b Mon Sep 17 00:00:00 2001 From: "salina@us.ibm.com" Date: Tue, 7 May 2013 16:18:09 +0200 Subject: Char: lp, protect LPGETSTATUS with port_mutex The patch fixes a problem in the lp driver that can cause oopses as follows: process A: calls lp_write, which in turn calls parport_ieee1284_write_compat, and that invokes parport_wait_peripheral process B: meanwhile does an ioctl(LPGETSTATUS), which call lp_release_parport when done. This function will set physport->cad = NULL. process A: parport_wait_peripheral tries to dereference physport->cad and dies So, protect that code with the port_mutex in order to protect against simultaneous calls to lp_read/lp_write. Similar protection is probably required for ioctl(LPRESET)... This patch was done by IBM a while back and we (at suse) have that since at least 2004 in our repos. Let's make it upstream. Signed-off-by: okir@suse.de Signed-off-by: Jiri Slaby Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- drivers/char/lp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/char/lp.c b/drivers/char/lp.c index dafd9ac6428f..0913d79424d3 100644 --- a/drivers/char/lp.c +++ b/drivers/char/lp.c @@ -622,9 +622,12 @@ static int lp_do_ioctl(unsigned int minor, unsigned int cmd, return -EFAULT; break; case LPGETSTATUS: + if (mutex_lock_interruptible(&lp_table[minor].port_mutex)) + return -EINTR; lp_claim_parport_or_block (&lp_table[minor]); status = r_str(minor); lp_release_parport (&lp_table[minor]); + mutex_unlock(&lp_table[minor].port_mutex); if (copy_to_user(argp, &status, sizeof(int))) return -EFAULT; -- cgit v1.2.3 From a6ac1bc341e499ad5296f265dfa8eba5afbf4191 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 14 May 2013 02:13:24 +0100 Subject: drm/qxl: fix ioport interactions for kernel submitted commands. So qxl has ioports, but it really really really doesn't want you to write to them twice, but if you write and get a signal before the irq arrives to let you know its completed, you have to think ahead and avoid writing another time. However this works fine for update area where really multiple writes aren't the end of the world, however with create primary surface, you can't ever do multiple writes. So this stop internal kernel writes from doing interruptible waits, because otherwise we have no idea if this write is a new one or a continuation of a previous one. virtual hw sucks more than real hw. This fixes lockups and VM crashes when resizing and starting/stopping X. Signed-off-by: Dave Airlie --- drivers/gpu/drm/qxl/qxl_cmd.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/qxl/qxl_cmd.c b/drivers/gpu/drm/qxl/qxl_cmd.c index 08b0823c93d5..f86771481317 100644 --- a/drivers/gpu/drm/qxl/qxl_cmd.c +++ b/drivers/gpu/drm/qxl/qxl_cmd.c @@ -277,7 +277,7 @@ out_unref: return 0; } -static int wait_for_io_cmd_user(struct qxl_device *qdev, uint8_t val, long port) +static int wait_for_io_cmd_user(struct qxl_device *qdev, uint8_t val, long port, bool intr) { int irq_num; long addr = qdev->io_base + port; @@ -285,20 +285,29 @@ static int wait_for_io_cmd_user(struct qxl_device *qdev, uint8_t val, long port) mutex_lock(&qdev->async_io_mutex); irq_num = atomic_read(&qdev->irq_received_io_cmd); - - if (qdev->last_sent_io_cmd > irq_num) { - ret = wait_event_interruptible(qdev->io_cmd_event, - atomic_read(&qdev->irq_received_io_cmd) > irq_num); - if (ret) + if (intr) + ret = wait_event_interruptible_timeout(qdev->io_cmd_event, + atomic_read(&qdev->irq_received_io_cmd) > irq_num, 5*HZ); + else + ret = wait_event_timeout(qdev->io_cmd_event, + atomic_read(&qdev->irq_received_io_cmd) > irq_num, 5*HZ); + /* 0 is timeout, just bail the "hw" has gone away */ + if (ret <= 0) goto out; irq_num = atomic_read(&qdev->irq_received_io_cmd); } outb(val, addr); qdev->last_sent_io_cmd = irq_num + 1; - ret = wait_event_interruptible(qdev->io_cmd_event, - atomic_read(&qdev->irq_received_io_cmd) > irq_num); + if (intr) + ret = wait_event_interruptible_timeout(qdev->io_cmd_event, + atomic_read(&qdev->irq_received_io_cmd) > irq_num, 5*HZ); + else + ret = wait_event_timeout(qdev->io_cmd_event, + atomic_read(&qdev->irq_received_io_cmd) > irq_num, 5*HZ); out: + if (ret > 0) + ret = 0; mutex_unlock(&qdev->async_io_mutex); return ret; } @@ -308,7 +317,7 @@ static void wait_for_io_cmd(struct qxl_device *qdev, uint8_t val, long port) int ret; restart: - ret = wait_for_io_cmd_user(qdev, val, port); + ret = wait_for_io_cmd_user(qdev, val, port, false); if (ret == -ERESTARTSYS) goto restart; } @@ -340,7 +349,7 @@ int qxl_io_update_area(struct qxl_device *qdev, struct qxl_bo *surf, mutex_lock(&qdev->update_area_mutex); qdev->ram_header->update_area = *area; qdev->ram_header->update_surface = surface_id; - ret = wait_for_io_cmd_user(qdev, 0, QXL_IO_UPDATE_AREA_ASYNC); + ret = wait_for_io_cmd_user(qdev, 0, QXL_IO_UPDATE_AREA_ASYNC, true); mutex_unlock(&qdev->update_area_mutex); return ret; } -- cgit v1.2.3 From d7292a07a1b3d0b31a54a3e949ed4dd99e9a85e8 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 13 May 2013 12:42:26 +1000 Subject: qxl: drop unused variable. this boolean isn't used anymore so drop it. Signed-off-by: Dave Airlie --- drivers/gpu/drm/qxl/qxl_display.c | 1 - drivers/gpu/drm/qxl/qxl_drv.h | 1 - 2 files changed, 2 deletions(-) diff --git a/drivers/gpu/drm/qxl/qxl_display.c b/drivers/gpu/drm/qxl/qxl_display.c index fcfd4436ceed..735ddd2cb99f 100644 --- a/drivers/gpu/drm/qxl/qxl_display.c +++ b/drivers/gpu/drm/qxl/qxl_display.c @@ -604,7 +604,6 @@ static int qxl_crtc_mode_set(struct drm_crtc *crtc, mode->hdisplay, mode->vdisplay); } - qdev->mode_set = true; return 0; } diff --git a/drivers/gpu/drm/qxl/qxl_drv.h b/drivers/gpu/drm/qxl/qxl_drv.h index 52b582c211da..5b7c130f4744 100644 --- a/drivers/gpu/drm/qxl/qxl_drv.h +++ b/drivers/gpu/drm/qxl/qxl_drv.h @@ -270,7 +270,6 @@ struct qxl_device { struct qxl_ring *cursor_ring; struct qxl_ram_header *ram_header; - bool mode_set; bool primary_created; -- cgit v1.2.3 From b2b4465d8bade681491e225fa6a5dc050820b004 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 13 May 2013 12:48:40 +1000 Subject: drm/qxl: drop active_user_framebuffer as its unneeded This was a bogus way to figure out what the active framebuffer was, just check if the underlying bo is the primary bo. Signed-off-by: Dave Airlie --- drivers/gpu/drm/qxl/qxl_display.c | 16 ++++------------ drivers/gpu/drm/qxl/qxl_drv.h | 6 ------ 2 files changed, 4 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/qxl/qxl_display.c b/drivers/gpu/drm/qxl/qxl_display.c index 735ddd2cb99f..823d29e926ec 100644 --- a/drivers/gpu/drm/qxl/qxl_display.c +++ b/drivers/gpu/drm/qxl/qxl_display.c @@ -428,10 +428,10 @@ static int qxl_framebuffer_surface_dirty(struct drm_framebuffer *fb, int inc = 1; qobj = gem_to_qxl_bo(qxl_fb->obj); - if (qxl_fb != qdev->active_user_framebuffer) { - DRM_INFO("%s: qxl_fb 0x%p != qdev->active_user_framebuffer 0x%p\n", - __func__, qxl_fb, qdev->active_user_framebuffer); - } + /* if we aren't primary surface ignore this */ + if (!qobj->is_primary) + return 0; + if (!num_clips) { num_clips = 1; clips = &norect; @@ -892,7 +892,6 @@ qxl_user_framebuffer_create(struct drm_device *dev, { struct drm_gem_object *obj; struct qxl_framebuffer *qxl_fb; - struct qxl_device *qdev = dev->dev_private; int ret; obj = drm_gem_object_lookup(dev, file_priv, mode_cmd->handles[0]); @@ -908,13 +907,6 @@ qxl_user_framebuffer_create(struct drm_device *dev, return NULL; } - if (qdev->active_user_framebuffer) { - DRM_INFO("%s: active_user_framebuffer %p -> %p\n", - __func__, - qdev->active_user_framebuffer, qxl_fb); - } - qdev->active_user_framebuffer = qxl_fb; - return &qxl_fb->base; } diff --git a/drivers/gpu/drm/qxl/qxl_drv.h b/drivers/gpu/drm/qxl/qxl_drv.h index 5b7c130f4744..43d06ab28a21 100644 --- a/drivers/gpu/drm/qxl/qxl_drv.h +++ b/drivers/gpu/drm/qxl/qxl_drv.h @@ -255,12 +255,6 @@ struct qxl_device { struct qxl_gem gem; struct qxl_mode_info mode_info; - /* - * last created framebuffer with fb_create - * only used by debugfs dumbppm - */ - struct qxl_framebuffer *active_user_framebuffer; - struct fb_info *fbdev_info; struct qxl_framebuffer *fbdev_qfb; void *ram_physical; -- cgit v1.2.3 From b90ed1e931c4d11cf32710c8a310b603effb5b11 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 9 May 2013 05:07:10 +0100 Subject: qxl: fix bug with object eviction and update area if the surface is evicted, this validation will happen to the wrong place, I noticed this with other work I was doing, haven't seen it go wrong in practice. Signed-off-by: Dave Airlie --- drivers/gpu/drm/qxl/qxl_ioctl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/qxl/qxl_ioctl.c b/drivers/gpu/drm/qxl/qxl_ioctl.c index 04b64f9cbfdb..6db7370373ea 100644 --- a/drivers/gpu/drm/qxl/qxl_ioctl.c +++ b/drivers/gpu/drm/qxl/qxl_ioctl.c @@ -294,6 +294,7 @@ static int qxl_update_area_ioctl(struct drm_device *dev, void *data, goto out; if (!qobj->pin_count) { + qxl_ttm_placement_from_domain(qobj, qobj->type); ret = ttm_bo_validate(&qobj->tbo, &qobj->placement, true, false); if (unlikely(ret)) -- cgit v1.2.3 From e9ced8e040ebe40e9953db90acbe7d0b58702ebb Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 15 May 2013 01:23:36 +0000 Subject: drm/radeon: restore nomodeset operation (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When UMS was deprecated it removed support for nomodeset commandline we really want this in distro land so we can debug stuff, everyone should fallback to vesa correctly. v2: oops -1 isn't used anymore, restore original behaviour -1 is default, so we can boot with nomodeset on the command line, then use radeon.modeset=1 to override it for debugging later. Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_drv.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index d33f484ace48..094e7e5ea39e 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -147,7 +147,7 @@ static inline void radeon_unregister_atpx_handler(void) {} #endif int radeon_no_wb; -int radeon_modeset = 1; +int radeon_modeset = -1; int radeon_dynclks = -1; int radeon_r4xx_atom = 0; int radeon_agpmode = 0; @@ -456,6 +456,16 @@ static struct pci_driver radeon_kms_pci_driver = { static int __init radeon_init(void) { +#ifdef CONFIG_VGA_CONSOLE + if (vgacon_text_force() && radeon_modeset == -1) { + DRM_INFO("VGACON disable radeon kernel modesetting.\n"); + radeon_modeset = 0; + } +#endif + /* set to modesetting by default if not nomodeset */ + if (radeon_modeset == -1) + radeon_modeset = 1; + if (radeon_modeset == 1) { DRM_INFO("radeon kernel modesetting enabled.\n"); driver = &kms_driver; -- cgit v1.2.3 From e6135fe960bba1d1a3a6b6818839e6d8d3f21293 Mon Sep 17 00:00:00 2001 From: Torstein Hegge Date: Thu, 16 May 2013 20:26:17 +0200 Subject: ALSA: usb-audio: proc: use found syncmaxsize to determine feedback format freqshift is only set for the data endpoint and syncmaxsize is only set for the sync endpoint. This results in a syncmaxsize of zero used in the proc output feedback format calculation, which gives a feedback format incorrectly shown as 8.16 for UAC2 devices. As neither the data nor the sync endpoint gives all the relevant content, output the two combined. Also remove the sync_endpoint "packet size" which is always zero and the sync_endpoint "momentary freq" which is constant. Tested with UAC2 async and UAC1 adaptive, not tested with UAC1 async. Reported-by: B. Zhang Signed-off-by: Torstein Hegge Signed-off-by: Takashi Iwai --- sound/usb/proc.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/sound/usb/proc.c b/sound/usb/proc.c index 135c76871063..5f761ab34c01 100644 --- a/sound/usb/proc.c +++ b/sound/usb/proc.c @@ -116,21 +116,22 @@ static void proc_dump_substream_formats(struct snd_usb_substream *subs, struct s } static void proc_dump_ep_status(struct snd_usb_substream *subs, - struct snd_usb_endpoint *ep, + struct snd_usb_endpoint *data_ep, + struct snd_usb_endpoint *sync_ep, struct snd_info_buffer *buffer) { - if (!ep) + if (!data_ep) return; - snd_iprintf(buffer, " Packet Size = %d\n", ep->curpacksize); + snd_iprintf(buffer, " Packet Size = %d\n", data_ep->curpacksize); snd_iprintf(buffer, " Momentary freq = %u Hz (%#x.%04x)\n", subs->speed == USB_SPEED_FULL - ? get_full_speed_hz(ep->freqm) - : get_high_speed_hz(ep->freqm), - ep->freqm >> 16, ep->freqm & 0xffff); - if (ep->freqshift != INT_MIN) { - int res = 16 - ep->freqshift; + ? get_full_speed_hz(data_ep->freqm) + : get_high_speed_hz(data_ep->freqm), + data_ep->freqm >> 16, data_ep->freqm & 0xffff); + if (sync_ep && data_ep->freqshift != INT_MIN) { + int res = 16 - data_ep->freqshift; snd_iprintf(buffer, " Feedback Format = %d.%d\n", - (ep->syncmaxsize > 3 ? 32 : 24) - res, res); + (sync_ep->syncmaxsize > 3 ? 32 : 24) - res, res); } } @@ -140,8 +141,7 @@ static void proc_dump_substream_status(struct snd_usb_substream *subs, struct sn snd_iprintf(buffer, " Status: Running\n"); snd_iprintf(buffer, " Interface = %d\n", subs->interface); snd_iprintf(buffer, " Altset = %d\n", subs->altset_idx); - proc_dump_ep_status(subs, subs->data_endpoint, buffer); - proc_dump_ep_status(subs, subs->sync_endpoint, buffer); + proc_dump_ep_status(subs, subs->data_endpoint, subs->sync_endpoint, buffer); } else { snd_iprintf(buffer, " Status: Stop\n"); } -- cgit v1.2.3 From 72822225bd41320a98f5d7cde38317766e18983f Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Mon, 15 Apr 2013 21:43:29 +0800 Subject: batman-adv: Fix rcu_barrier() miss due to double call_rcu() in TT code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit rcu_barrier() only waits for the currently scheduled rcu functions to finish - it won't wait for any function scheduled via another call_rcu() within an rcu scheduled function. Unfortunately our batadv_tt_orig_list_entry_free_ref() does just that, via a batadv_orig_node_free_ref() call, leading to our rcu_barrier() call potentially missing such a batadv_orig_node_free_ref(). This patch fixes this issue by calling the batadv_orig_node_free_rcu() directly from the rcu callback, removing the unnecessary, additional call_rcu() layer here. Signed-off-by: Linus Lüssing Signed-off-by: Marek Lindner Acked-by: Antonio Quartulli --- net/batman-adv/originator.c | 16 ++++++++++++++++ net/batman-adv/originator.h | 1 + net/batman-adv/translation-table.c | 7 ++++++- 3 files changed, 23 insertions(+), 1 deletion(-) diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c index 2f3452546636..fad1a2093e15 100644 --- a/net/batman-adv/originator.c +++ b/net/batman-adv/originator.c @@ -156,12 +156,28 @@ static void batadv_orig_node_free_rcu(struct rcu_head *rcu) kfree(orig_node); } +/** + * batadv_orig_node_free_ref - decrement the orig node refcounter and possibly + * schedule an rcu callback for freeing it + * @orig_node: the orig node to free + */ void batadv_orig_node_free_ref(struct batadv_orig_node *orig_node) { if (atomic_dec_and_test(&orig_node->refcount)) call_rcu(&orig_node->rcu, batadv_orig_node_free_rcu); } +/** + * batadv_orig_node_free_ref_now - decrement the orig node refcounter and + * possibly free it (without rcu callback) + * @orig_node: the orig node to free + */ +void batadv_orig_node_free_ref_now(struct batadv_orig_node *orig_node) +{ + if (atomic_dec_and_test(&orig_node->refcount)) + batadv_orig_node_free_rcu(&orig_node->rcu); +} + void batadv_originator_free(struct batadv_priv *bat_priv) { struct batadv_hashtable *hash = bat_priv->orig_hash; diff --git a/net/batman-adv/originator.h b/net/batman-adv/originator.h index 7df48fa7669d..734e5a3d8a5b 100644 --- a/net/batman-adv/originator.h +++ b/net/batman-adv/originator.h @@ -26,6 +26,7 @@ int batadv_originator_init(struct batadv_priv *bat_priv); void batadv_originator_free(struct batadv_priv *bat_priv); void batadv_purge_orig_ref(struct batadv_priv *bat_priv); void batadv_orig_node_free_ref(struct batadv_orig_node *orig_node); +void batadv_orig_node_free_ref_now(struct batadv_orig_node *orig_node); struct batadv_orig_node *batadv_get_orig_node(struct batadv_priv *bat_priv, const uint8_t *addr); struct batadv_neigh_node * diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 5e89deeb9542..9e8748575845 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -144,7 +144,12 @@ static void batadv_tt_orig_list_entry_free_rcu(struct rcu_head *rcu) struct batadv_tt_orig_list_entry *orig_entry; orig_entry = container_of(rcu, struct batadv_tt_orig_list_entry, rcu); - batadv_orig_node_free_ref(orig_entry->orig_node); + + /* We are in an rcu callback here, therefore we cannot use + * batadv_orig_node_free_ref() and its call_rcu(): + * An rcu_barrier() wouldn't wait for that to finish + */ + batadv_orig_node_free_ref_now(orig_entry->orig_node); kfree(orig_entry); } -- cgit v1.2.3 From e6f34cea56f5b95498070eaa9f4aa3ba4a9e4f62 Mon Sep 17 00:00:00 2001 From: Josef Ahmad Date: Fri, 19 Apr 2013 17:28:10 +0100 Subject: i2c: designware: fix RX FIFO overrun i2c_dw_xfer_msg() pushes a number of bytes to transmit/receive to/from the bus into the TX FIFO. For master-rx transactions, the maximum amount of data that can be received is calculated depending solely on TX and RX FIFO load. This is racy - TX FIFO may contain master-rx data yet to be processed, which will eventually land into the RX FIFO. This data is not taken into account and the function may request more data than the controller is actually capable of storing. This patch ensures the driver takes into account the outstanding master-rx data in TX FIFO to prevent RX FIFO overrun. Signed-off-by: Josef Ahmad Acked-by: Mika Westerberg Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-designware-core.c | 11 ++++++++++- drivers/i2c/busses/i2c-designware-core.h | 2 ++ 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 21fbb340ad66..1f06c8e9934c 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -448,8 +448,14 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) cmd |= BIT(9); if (msgs[dev->msg_write_idx].flags & I2C_M_RD) { + + /* avoid rx buffer overrun */ + if (rx_limit - dev->rx_outstanding <= 0) + break; + dw_writel(dev, cmd | 0x100, DW_IC_DATA_CMD); rx_limit--; + dev->rx_outstanding++; } else dw_writel(dev, cmd | *buf++, DW_IC_DATA_CMD); tx_limit--; buf_len--; @@ -502,8 +508,10 @@ i2c_dw_read(struct dw_i2c_dev *dev) rx_valid = dw_readl(dev, DW_IC_RXFLR); - for (; len > 0 && rx_valid > 0; len--, rx_valid--) + for (; len > 0 && rx_valid > 0; len--, rx_valid--) { *buf++ = dw_readl(dev, DW_IC_DATA_CMD); + dev->rx_outstanding--; + } if (len > 0) { dev->status |= STATUS_READ_IN_PROGRESS; @@ -561,6 +569,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) dev->msg_err = 0; dev->status = STATUS_IDLE; dev->abort_source = 0; + dev->rx_outstanding = 0; ret = i2c_dw_wait_bus_not_busy(dev); if (ret < 0) diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 9c1840ee09c7..e761ad18dd61 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -60,6 +60,7 @@ * @adapter: i2c subsystem adapter node * @tx_fifo_depth: depth of the hardware tx fifo * @rx_fifo_depth: depth of the hardware rx fifo + * @rx_outstanding: current master-rx elements in tx fifo */ struct dw_i2c_dev { struct device *dev; @@ -88,6 +89,7 @@ struct dw_i2c_dev { u32 master_cfg; unsigned int tx_fifo_depth; unsigned int rx_fifo_depth; + int rx_outstanding; }; #define ACCESS_SWAP 0x00000001 -- cgit v1.2.3 From 2a2d95e9d6d29e726cc294b65391917ed2e32bf4 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 13 May 2013 00:54:30 +0000 Subject: i2c: designware: always clear interrupts before enabling them If the I2C bus is put to a low power state by an ACPI method it might pull the SDA line low (as its power is removed). Once the bus is put to full power state again, the SDA line is pulled back to high. This transition looks like a STOP condition from the controller point-of-view which sets STOP detected bit in its status register causing the driver to fail subsequent transfers. Fix this by always clearing all interrupts before we start a transfer. Signed-off-by: Mika Westerberg Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-designware-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 1f06c8e9934c..c41ca6354fc5 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -383,7 +383,8 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) /* Enable the adapter */ __i2c_dw_enable(dev, true); - /* Enable interrupts */ + /* Clear and enable interrupts */ + i2c_dw_clear_int(dev); dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK); } -- cgit v1.2.3 From 06c9494c0e9bdfcaa14d6d2b096a0ff7abe8494f Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 15 May 2013 20:33:01 +0100 Subject: kmemleak: Scan all allocated, writeable and not executable module sections Instead of just picking data sections by name (names that start with .data, .bss or .ref.data), use the section flags and scan all sections that are allocated, writable and not executable. Which should cover all sections of a module that might reference data. Signed-off-by: Steven Rostedt [catalin.marinas@arm.com: removed unused 'name' variable] [catalin.marinas@arm.com: collapsed 'if' blocks] Signed-off-by: Catalin Marinas Acked-by: Rusty Russell --- kernel/module.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/kernel/module.c b/kernel/module.c index b049939177f6..06f496a5d182 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -2431,10 +2431,10 @@ static void kmemleak_load_module(const struct module *mod, kmemleak_scan_area(mod, sizeof(struct module), GFP_KERNEL); for (i = 1; i < info->hdr->e_shnum; i++) { - const char *name = info->secstrings + info->sechdrs[i].sh_name; - if (!(info->sechdrs[i].sh_flags & SHF_ALLOC)) - continue; - if (!strstarts(name, ".data") && !strstarts(name, ".bss")) + /* Scan all writable sections that's not executable */ + if (!(info->sechdrs[i].sh_flags & SHF_ALLOC) || + !(info->sechdrs[i].sh_flags & SHF_WRITE) || + (info->sechdrs[i].sh_flags & SHF_EXECINSTR)) continue; kmemleak_scan_area((void *)info->sechdrs[i].sh_addr, -- cgit v1.2.3 From 89c837351db0b9b52fd572ec8b0445a42e59b75c Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 15 May 2013 20:46:23 +0100 Subject: kmemleak: No need for scanning specific module sections As kmemleak now scans all module sections that are allocated, writable and non executable, there's no need to scan individual sections that might reference data. Signed-off-by: Steven Rostedt Signed-off-by: Catalin Marinas Acked-by: Rusty Russell --- kernel/module.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/kernel/module.c b/kernel/module.c index 06f496a5d182..cab4bce49c23 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -2769,24 +2769,11 @@ static void find_module_sections(struct module *mod, struct load_info *info) mod->trace_events = section_objs(info, "_ftrace_events", sizeof(*mod->trace_events), &mod->num_trace_events); - /* - * This section contains pointers to allocated objects in the trace - * code and not scanning it leads to false positives. - */ - kmemleak_scan_area(mod->trace_events, sizeof(*mod->trace_events) * - mod->num_trace_events, GFP_KERNEL); #endif #ifdef CONFIG_TRACING mod->trace_bprintk_fmt_start = section_objs(info, "__trace_printk_fmt", sizeof(*mod->trace_bprintk_fmt_start), &mod->num_trace_bprintk_fmt); - /* - * This section contains pointers to allocated objects in the trace - * code and not scanning it leads to false positives. - */ - kmemleak_scan_area(mod->trace_bprintk_fmt_start, - sizeof(*mod->trace_bprintk_fmt_start) * - mod->num_trace_bprintk_fmt, GFP_KERNEL); #endif #ifdef CONFIG_FTRACE_MCOUNT_RECORD /* sechdrs[0].sh_size is always zero */ -- cgit v1.2.3 From a4eeea4e530fee26918529eb1b36ae306095eef5 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 15 May 2013 16:53:07 +0200 Subject: s390/smp: fix cpu re-scan vs. cpu state The cpu-info array starts with a list of cpus in configured state, followed by the cpus in standby state. The comparison to decide which state a cpu has is incorrect, this causes configured cpus appear as standby cpus. The correct comparison is the index of the new cpu in the cpu-info array vs. the number of configured cpus. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 8074cb4b7cbf..05674b669001 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -645,7 +645,7 @@ static int __cpuinit __smp_rescan_cpus(struct sclp_cpu_info *info, continue; pcpu = pcpu_devices + cpu; pcpu->address = info->cpu[i].address; - pcpu->state = (cpu >= info->configured) ? + pcpu->state = (i >= info->configured) ? CPU_STATE_STANDBY : CPU_STATE_CONFIGURED; smp_cpu_set_polarization(cpu, POLARIZATION_UNKNOWN); set_cpu_present(cpu, true); -- cgit v1.2.3 From 00e5d35c0ffcbc59d7126387a0ca74a3abe62f59 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 16 May 2013 15:27:13 +0200 Subject: s390/xpram: mark xpram as non-rotational xpram is a memory technology. Lets mark that as non-rotational. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- drivers/s390/block/xpram.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c index 690c3338a8ae..464dd29d06c0 100644 --- a/drivers/s390/block/xpram.c +++ b/drivers/s390/block/xpram.c @@ -343,6 +343,7 @@ static int __init xpram_setup_blkdev(void) put_disk(xpram_disks[i]); goto out; } + queue_flag_set_unlocked(QUEUE_FLAG_NONROT, xpram_queues[i]); blk_queue_make_request(xpram_queues[i], xpram_make_request); blk_queue_logical_block_size(xpram_queues[i], 4096); } -- cgit v1.2.3 From 6b8224e40af147d3300136ce6d037db48f89068f Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 16 May 2013 22:16:32 +0200 Subject: s390/pgtable: fix ipte notify bit Dont use the same bit as user referenced. Signed-off-by: Christian Borntraeger --- arch/s390/include/asm/pgtable.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 4105b8221fdd..0f0de30e3e3f 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -306,7 +306,7 @@ extern unsigned long MODULES_END; #define RCP_HC_BIT 0x00200000UL #define RCP_GR_BIT 0x00040000UL #define RCP_GC_BIT 0x00020000UL -#define RCP_IN_BIT 0x00008000UL /* IPTE notify bit */ +#define RCP_IN_BIT 0x00002000UL /* IPTE notify bit */ /* User dirty / referenced bit for KVM's migration feature */ #define KVM_UR_BIT 0x00008000UL @@ -374,7 +374,7 @@ extern unsigned long MODULES_END; #define RCP_HC_BIT 0x0020000000000000UL #define RCP_GR_BIT 0x0004000000000000UL #define RCP_GC_BIT 0x0002000000000000UL -#define RCP_IN_BIT 0x0000800000000000UL /* IPTE notify bit */ +#define RCP_IN_BIT 0x0000200000000000UL /* IPTE notify bit */ /* User dirty / referenced bit for KVM's migration feature */ #define KVM_UR_BIT 0x0000800000000000UL -- cgit v1.2.3 From c6c003af0b91bb8722dbf2a8683cd40532e12079 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Fri, 17 May 2013 08:09:57 -0300 Subject: ARM: mvebu: Fix ranges entry on XP GP board With the latest device tree reorganization which introduced the 'internal-reg' node, now the only region translated is the internal register's. This makes the description of the hardware incomplete, for it lacks the Device Bus childs address space. In order to fix this, it's required to add a 'ranges' entry with a suitable address space to map Device Bus childs, on a per-board basis. This patch fixes the ranges property on the Armada XP GP board. Signed-off-by: Ezequiel Garcia Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-gp.dts | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 26ad06fc147e..3ee63d128e27 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -39,6 +39,9 @@ }; soc { + ranges = <0 0 0xd0000000 0x100000 + 0xf0000000 0 0xf0000000 0x1000000>; + internal-regs { serial@12000 { clock-frequency = <250000000>; -- cgit v1.2.3 From a6d25f4c951b8b28f2eaec6f891ff834622532f2 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Wed, 27 Mar 2013 15:34:26 +0530 Subject: ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock It is required to enable respective clock-domain before enabling any clock/module inside that clock-domain. During common-clock migration, .clkdm_name field got missed for "clkdiv32k_ick" clock, which leaves "clk_24mhz_clkdm" unused; so it will be disabled even if childs of this clock-domain is enabled, which keeps child modules in idle mode. This fixes the kernel crash observed on AM335xEVM-SK platform, where clkdiv32_ick clock is being used as a gpio debounce clock and since clkdiv32k_ick is in idle mode it leads to below crash - Crash Log: ========== [ 2.598347] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa1ac150 [ 2.606434] Internal error: : 1028 [#1] SMP ARM [ 2.611207] Modules linked in: [ 2.614449] CPU: 0 Not tainted (3.8.4-01382-g1f449cd-dirty #4) [ 2.620973] PC is at _set_gpio_debounce+0x60/0x104 [ 2.626025] LR is at clk_enable+0x30/0x3c Cc: stable@vger.kernel.org # v3.9 Signed-off-by: Vaibhav Hiremath Cc: Rajendra Nayak Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/cclock33xx_data.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index 6ebc7803bc3e..af3544ce4f02 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -454,9 +454,29 @@ DEFINE_CLK_GATE(cefuse_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0, */ DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732); -DEFINE_CLK_GATE(clkdiv32k_ick, "clkdiv32k_ck", &clkdiv32k_ck, 0x0, - AM33XX_CM_PER_CLKDIV32K_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT, - 0x0, NULL); +static struct clk clkdiv32k_ick; + +static const char *clkdiv32k_ick_parent_names[] = { + "clkdiv32k_ck", +}; + +static const struct clk_ops clkdiv32k_ick_ops = { + .enable = &omap2_dflt_clk_enable, + .disable = &omap2_dflt_clk_disable, + .is_enabled = &omap2_dflt_clk_is_enabled, + .init = &omap2_init_clk_clkdm, +}; + +static struct clk_hw_omap clkdiv32k_ick_hw = { + .hw = { + .clk = &clkdiv32k_ick, + }, + .enable_reg = AM33XX_CM_PER_CLKDIV32K_CLKCTRL, + .enable_bit = AM33XX_MODULEMODE_SWCTRL_SHIFT, + .clkdm_name = "clk_24mhz_clkdm", +}; + +DEFINE_STRUCT_CLK(clkdiv32k_ick, clkdiv32k_ick_parent_names, clkdiv32k_ick_ops); /* "usbotg_fck" is an additional clock and not really a modulemode */ DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0, -- cgit v1.2.3 From 3126976be64bfb4c87297cb022ca815212079aec Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 17 May 2013 17:41:22 +0100 Subject: arm64: debug: fix mdscr.ss check when enabling debug exceptions When we take an exception at EL1, we only want to enable debug exceptions if we're not currently stepping, otherwise we can easily get stuck in a loop stepping into interrupt handlers. Unfortunately, the current code tests the wrong bit in the mdscr, so fix that. Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/assembler.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index c8eedc604984..5aceb83b3f5c 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -82,7 +82,7 @@ .macro enable_dbg_if_not_stepping, tmp mrs \tmp, mdscr_el1 - tbnz \tmp, #1, 9990f + tbnz \tmp, #0, 9990f enable_dbg 9990: .endm -- cgit v1.2.3 From becdbc592580f76df58fdae14544f5db36ae05b4 Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Thu, 9 May 2013 13:19:39 +0400 Subject: iwlegacy: remove inline marking of EXPORT_SYMBOL functions EXPORT_SYMBOL and inline directives are contradictory to each other. The patch fixes this inconsistency. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c index 592d0aa634a8..e9a3cbc409ae 100644 --- a/drivers/net/wireless/iwlegacy/common.c +++ b/drivers/net/wireless/iwlegacy/common.c @@ -1423,7 +1423,7 @@ il_setup_rx_scan_handlers(struct il_priv *il) } EXPORT_SYMBOL(il_setup_rx_scan_handlers); -inline u16 +u16 il_get_active_dwell_time(struct il_priv *il, enum ieee80211_band band, u8 n_probes) { -- cgit v1.2.3 From d4988d4c733ba0b61cb372edd3d1992d26dd10d3 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Thu, 9 May 2013 21:24:24 +0200 Subject: bcma: add more core IDs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit PCIe and ARM CR4 cores were found on 14e4:43b1 AKA BCM4352. Reported-by: Gabriel Thörnblad Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/bcma/scan.c | 2 ++ include/linux/bcma/bcma.h | 5 ++++- 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c index bca9c80056fe..8bffa5c9818c 100644 --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c @@ -84,6 +84,8 @@ static const struct bcma_device_id_name bcma_bcm_device_names[] = { { BCMA_CORE_I2S, "I2S" }, { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" }, { BCMA_CORE_SHIM, "SHIM" }, + { BCMA_CORE_PCIE2, "PCIe Gen2" }, + { BCMA_CORE_ARM_CR4, "ARM CR4" }, { BCMA_CORE_DEFAULT, "Default" }, }; diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index f14a98a79c9d..2e34db82a643 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -134,7 +134,10 @@ struct bcma_host_ops { #define BCMA_CORE_I2S 0x834 #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ -#define BCMA_CORE_ARM_CR4 0x83e +#define BCMA_CORE_PHY_AC 0x83B +#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */ +#define BCMA_CORE_USB30_DEV 0x83D +#define BCMA_CORE_ARM_CR4 0x83E #define BCMA_CORE_DEFAULT 0xFFF #define BCMA_MAX_NR_CORES 16 -- cgit v1.2.3 From a01ae5b367475e0615144f6243ef6283ff95466f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 May 2013 23:04:47 +0200 Subject: net/wireless: ATH9K should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `ath9k_beacon_generate': drivers/net/wireless/ath/ath9k/beacon.c:146: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath9k/beacon.c:174: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/beacon.c:176: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath9k_beacon_remove_slot': drivers/net/wireless/ath/ath9k/beacon.c:252: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_descdma_setup': drivers/net/wireless/ath/ath9k/init.c:382: undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `ath_edma_get_buffers': drivers/net/wireless/ath/ath9k/recv.c:616: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_get_next_rx_buf': drivers/net/wireless/ath/ath9k/recv.c:740: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_rx_edma_cleanup': drivers/net/wireless/ath/ath9k/recv.c:176: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_cleanup': drivers/net/wireless/ath/ath9k/recv.c:340: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_edma_buf_link': drivers/net/wireless/ath/ath9k/recv.c:122: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_rx_tasklet': drivers/net/wireless/ath/ath9k/recv.c:1275: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:1277: undefined reference to `dma_mapping_error' drivers/net/wireless/ath/ath9k/recv.c:1283: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_edma_init': drivers/net/wireless/ath/ath9k/recv.c:226: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:229: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath_rx_init': drivers/net/wireless/ath/ath9k/recv.c:303: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:306: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath_tx_complete_buf': drivers/net/wireless/ath/ath9k/xmit.c:2088: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_txstatus_setup': drivers/net/wireless/ath/ath9k/xmit.c:2344: undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `ath_tx_set_retry': drivers/net/wireless/ath/ath9k/xmit.c:307: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_tx_setup_buffer': drivers/net/wireless/ath/ath9k/xmit.c:1887: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/xmit.c:1889: undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven Cc: Luis R. Rodriguez Cc: John W. Linville Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index 17507dc8a1e7..f3dc124c60c7 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -17,7 +17,7 @@ config ATH9K_BTCOEX_SUPPORT config ATH9K tristate "Atheros 802.11n wireless cards support" - depends on MAC80211 + depends on MAC80211 && HAS_DMA select ATH9K_HW select MAC80211_LEDS select LEDS_CLASS -- cgit v1.2.3 From af690092ce91a2a6d807cdfcc0b0b9b71ae54d3e Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Fri, 10 May 2013 18:41:06 +0530 Subject: ath9k: Fix crash on module unload Make sure that any open relayfs files are closed before unregistering with mac80211, otherwise this crash is seen: [ 1331.097846] BUG: unable to handle kernel paging request at 6b6b6b8b [ 1331.098170] IP: [] debugfs_remove+0x26/0x80 [ 1331.098170] *pdpt = 000000002f9aa001 *pde = 0000000000000000 [ 1331.098170] Oops: 0000 [#1] PREEMPT SMP [ 1331.098170] Modules linked in: iptable_raw xt_CT nf_conntrack_ipv4 nf_defrag] [ 1331.098170] Pid: 4794, comm: rmmod Tainted: G WC 3.9.1+ #5 To Be Fi. [ 1331.098170] EIP: 0060:[] EFLAGS: 00010202 CPU: 0 [ 1331.098170] EIP is at debugfs_remove+0x26/0x80 [ 1331.098170] EAX: f2f3acd0 EBX: f2f3acd0 ECX: 00000006 EDX: f8622348 [ 1331.098170] ESI: 6b6b6b6b EDI: 00000001 EBP: ee251e14 ESP: ee251e0c [ 1331.098170] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 1331.098170] CR0: 8005003b CR2: 6b6b6b8b CR3: 2e7b7000 CR4: 000007e0 [ 1331.098170] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 1331.098170] DR6: ffff0ff0 DR7: 00000400 [ 1331.098170] Process rmmod (pid: 4794, ti=ee250000 task=efaa2560 task.ti=ee25) [ 1331.098170] Stack: [ 1331.098170] f241e170 0000000a ee251e1c f861394d ee251e28 c04e3088 f241e170 4 [ 1331.098170] c04e30fe f45482b0 ee251e54 c04e3187 f25e86b0 ee251e54 f8618748 0 [ 1331.098170] 0000000a 00000001 ee251e68 f860065b f2509e20 f25085a0 f5b6e8a4 8 [ 1331.098170] Call Trace: [ 1331.098170] [] remove_buf_file_handler+0xd/0x20 [ath9k] [ 1331.098170] [] relay_remove_buf+0x18/0x30 [ 1331.098170] [] relay_close_buf+0x2e/0x40 [ 1331.098170] [] relay_close+0x77/0xf0 [ 1331.098170] [] ? dpd_exit+0x38/0x40 [ath9k] [ 1331.098170] [] ath9k_deinit_softc+0x8b/0xa0 [ath9k] [ 1331.098170] [] ath9k_deinit_device+0x48/0x60 [ath9k] [ 1331.098170] [] ath_pci_remove+0x31/0x50 [ath9k] [ 1331.098170] [] pci_device_remove+0x38/0xc0 [ 1331.098170] [] __device_release_driver+0x64/0xc0 [ 1331.098170] [] driver_detach+0x97/0xa0 [ 1331.098170] [] bus_remove_driver+0x6c/0xe0 [ 1331.098170] [] ? bus_put+0x17/0x20 [ 1331.098170] [] ? bus_remove_driver+0x83/0xe0 [ 1331.098170] [] driver_unregister+0x49/0x80 [ 1331.098170] [] pci_unregister_driver+0x18/0x80 [ 1331.098170] [] ath_pci_exit+0x12/0x20 [ath9k] [ 1331.098170] [] ath9k_exit+0x17/0x337 [ath9k] [ 1331.098170] [] ? mutex_unlock+0xd/0x10 [ 1331.098170] [] sys_delete_module+0x17c/0x250 [ 1331.098170] [] ? do_munmap+0x244/0x2d0 [ 1331.098170] [] ? vm_munmap+0x46/0x60 [ 1331.098170] [] ? restore_all+0xf/0xf [ 1331.098170] [] ? __do_page_fault+0x4c0/0x4c0 [ 1331.098170] [] ? trace_hardirqs_on_caller+0xf4/0x180 [ 1331.098170] [] sysenter_do_call+0x12/0x38 [ 1331.098170] Code: 90 8d 74 26 00 55 89 e5 83 ec 08 89 1c 24 89 74 24 04 3e 82 [ 1331.098170] EIP: [] debugfs_remove+0x26/0x80 SS:ESP 0068:ee251e0c [ 1331.098170] CR2: 000000006b6b6b8b [ 1331.727971] ---[ end trace b5bb9f2066cef7f9 ]--- Cc: Acked-by: Simon Wunderlich Tested-by: Ben Greear Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/debug.c | 8 ++++++++ drivers/net/wireless/ath/ath9k/debug.h | 5 +++++ drivers/net/wireless/ath/ath9k/init.c | 10 ++++------ 3 files changed, 17 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index e6307b86363a..b37eb8d38811 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -2008,6 +2008,14 @@ void ath9k_get_et_stats(struct ieee80211_hw *hw, WARN_ON(i != ATH9K_SSTATS_LEN); } +void ath9k_deinit_debug(struct ath_softc *sc) +{ + if (config_enabled(CONFIG_ATH9K_DEBUGFS) && sc->rfs_chan_spec_scan) { + relay_close(sc->rfs_chan_spec_scan); + sc->rfs_chan_spec_scan = NULL; + } +} + int ath9k_init_debug(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h index 794a7ec83a24..9d49aab8b989 100644 --- a/drivers/net/wireless/ath/ath9k/debug.h +++ b/drivers/net/wireless/ath/ath9k/debug.h @@ -304,6 +304,7 @@ struct ath9k_debug { }; int ath9k_init_debug(struct ath_hw *ah); +void ath9k_deinit_debug(struct ath_softc *sc); void ath_debug_stat_interrupt(struct ath_softc *sc, enum ath9k_int status); void ath_debug_stat_tx(struct ath_softc *sc, struct ath_buf *bf, @@ -339,6 +340,10 @@ static inline int ath9k_init_debug(struct ath_hw *ah) return 0; } +static inline void ath9k_deinit_debug(struct ath_softc *sc) +{ +} + static inline void ath_debug_stat_interrupt(struct ath_softc *sc, enum ath9k_int status) { diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 0237b2868961..aba415103f94 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -906,7 +906,7 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, if (!ath_is_world_regd(reg)) { error = regulatory_hint(hw->wiphy, reg->alpha2); if (error) - goto unregister; + goto debug_cleanup; } ath_init_leds(sc); @@ -914,6 +914,8 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, return 0; +debug_cleanup: + ath9k_deinit_debug(sc); unregister: ieee80211_unregister_hw(hw); rx_cleanup: @@ -942,11 +944,6 @@ static void ath9k_deinit_softc(struct ath_softc *sc) sc->dfs_detector->exit(sc->dfs_detector); ath9k_eeprom_release(sc); - - if (config_enabled(CONFIG_ATH9K_DEBUGFS) && sc->rfs_chan_spec_scan) { - relay_close(sc->rfs_chan_spec_scan); - sc->rfs_chan_spec_scan = NULL; - } } void ath9k_deinit_device(struct ath_softc *sc) @@ -960,6 +957,7 @@ void ath9k_deinit_device(struct ath_softc *sc) ath9k_ps_restore(sc); + ath9k_deinit_debug(sc); ieee80211_unregister_hw(hw); ath_rx_cleanup(sc); ath9k_deinit_softc(sc); -- cgit v1.2.3 From 58dd3ff86b4854cf6a60b60ab5eb57dbd0a2b4ad Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sun, 12 May 2013 21:43:46 -0500 Subject: rtlwifi: rtl8188ee: Fix warning when building on big-endian systems In http://lkml.indiana.edu/hypermail/linux/kernel/1305.1/index.html, Geert Uytterhoeven reports a new warning when building 3.10-rc1 in this driver. This is caused by using a "#if" test to see if __LITTLE_ENDIAN is set, which fails for all big-endian systems. Change to "ifdef". Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8188ee/trx.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h index d3a02e73f53a..21ca33a7c770 100644 --- a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h +++ b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h @@ -550,7 +550,7 @@ do { \ rxmcs == DESC92C_RATE11M) struct phy_rx_agc_info_t { - #if __LITTLE_ENDIAN + #ifdef __LITTLE_ENDIAN u8 gain:7, trsw:1; #else u8 trsw:1, gain:7; @@ -574,7 +574,7 @@ struct phy_status_rpt { u8 stream_target_csi[2]; u8 sig_evm; u8 rsvd_3; -#if __LITTLE_ENDIAN +#ifdef __LITTLE_ENDIAN u8 antsel_rx_keep_2:1; /*ex_intf_flg:1;*/ u8 sgi_en:1; u8 rxsc:2; -- cgit v1.2.3 From 9af221b3138903bd792cc74e68280cb557e95983 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 14 May 2013 20:52:36 +0200 Subject: brcmfmac: announce P2P_DEVICE support in wiphy structure P2P_DEVICE support was removed from brcmfmac for v3.9 kernel with the commit below: commit 1527c343c12f3a2aae532aa881d12c6fbf8749f4 Author: Arend van Spriel Date: Thu Apr 4 12:10:11 2013 +0200 brcmfmac: remove advertising P2P device support However, it got merged into wireless-next. But for 3.10 brcmfmac does support P2P device. Putting it back with this commit. Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 6d758f285352..761f501959a9 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4140,6 +4140,10 @@ static const struct ieee80211_iface_limit brcmf_iface_limits[] = { .types = BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_P2P_GO) }, + { + .max = 1, + .types = BIT(NL80211_IFTYPE_P2P_DEVICE) + } }; static const struct ieee80211_iface_combination brcmf_iface_combos[] = { { @@ -4197,7 +4201,8 @@ static struct wiphy *brcmf_setup_wiphy(struct device *phydev) BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_AP) | BIT(NL80211_IFTYPE_P2P_CLIENT) | - BIT(NL80211_IFTYPE_P2P_GO); + BIT(NL80211_IFTYPE_P2P_GO) | + BIT(NL80211_IFTYPE_P2P_DEVICE); wiphy->iface_combinations = brcmf_iface_combos; wiphy->n_iface_combinations = ARRAY_SIZE(brcmf_iface_combos); wiphy->bands[IEEE80211_BAND_2GHZ] = &__wl_band_2ghz; -- cgit v1.2.3 From 707a61528bc9709653a56d4cefa383f793732598 Mon Sep 17 00:00:00 2001 From: Albert Pool Date: Wed, 15 May 2013 10:03:16 -0500 Subject: rtlwifi: rtl8192cu: Add new USB ID This adds the USB ID of the On Networks N300MA, clone of Netgear WNA3100M. Signed-off-by: Albert Pool Signed-off-by: Larry Finger Reported-by: Ana Rey Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 23d640a4debd..938b1e670b93 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -349,6 +349,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = { {RTL_USB_DEVICE(0x07aa, 0x0056, rtl92cu_hal_cfg)}, /*ATKK-Gemtek*/ {RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/ {RTL_USB_DEVICE(0x0846, 0x9021, rtl92cu_hal_cfg)}, /*Netgear-Sercomm*/ + {RTL_USB_DEVICE(0x0846, 0xf001, rtl92cu_hal_cfg)}, /*On Netwrks N300MA*/ {RTL_USB_DEVICE(0x0b05, 0x17ab, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/ {RTL_USB_DEVICE(0x0bda, 0x8186, rtl92cu_hal_cfg)}, /*Realtek 92CE-VAU*/ {RTL_USB_DEVICE(0x0df6, 0x0061, rtl92cu_hal_cfg)}, /*Sitecom-Edimax*/ -- cgit v1.2.3 From e99c60b58b595eaa1c279922ae29d5397c787294 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Thu, 16 May 2013 22:47:34 +0530 Subject: ath9k_hw: Enable manual peak calibration for AR9485 Manual peak calibration is currently enabled only for AR9462 and AR9565. This is also required for AR9485. The initvals are also modified to disable HW peak calibration. Cc: Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_calib.c | 2 +- drivers/net/wireless/ath/ath9k/ar9485_initvals.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 639ba7d18ea4..6988e1d081f2 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -965,7 +965,7 @@ static void ar9003_hw_do_manual_peak_cal(struct ath_hw *ah, { int i; - if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah)) + if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah) && !AR_SREV_9485(ah)) return; for (i = 0; i < AR9300_MAX_CHAINS; i++) { diff --git a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h index 712f415b8c08..88ff1d7b53ab 100644 --- a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h @@ -1020,7 +1020,7 @@ static const u32 ar9485_1_1_baseband_postamble[][5] = { {0x0000a284, 0x00000000, 0x00000000, 0x000002a0, 0x000002a0}, {0x0000a288, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a28c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, - {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18}, + {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00058d18, 0x00058d18}, {0x0000a2d0, 0x00071981, 0x00071981, 0x00071982, 0x00071982}, {0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a}, {0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, -- cgit v1.2.3 From 16e23428024e4dc6b5ba5f6d36c57c49d33fe85b Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 17 May 2013 12:58:24 +0200 Subject: ath9k: fix aggregation stop/flush handling When aggregation stop is requested, don't run the mac80211 aggregation stop callback yet, while the session is still blocked. Also, when aggregation flush is requested, don't run the callback at all. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 4 ++- drivers/net/wireless/ath/ath9k/main.c | 8 +++-- drivers/net/wireless/ath/ath9k/xmit.c | 61 ++++++++++++++++++++++------------ 3 files changed, 48 insertions(+), 25 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 8a1888d02070..366002f266f8 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -254,6 +254,7 @@ struct ath_atx_tid { int sched; int paused; u8 state; + bool stop_cb; }; struct ath_node { @@ -351,7 +352,8 @@ void ath_tx_tasklet(struct ath_softc *sc); void ath_tx_edma_tasklet(struct ath_softc *sc); int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, u16 *ssn); -void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid); +bool ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, + bool flush); void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid); void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index a18414b5948b..2382d1262e7f 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1687,6 +1687,7 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, u16 tid, u16 *ssn, u8 buf_size) { struct ath_softc *sc = hw->priv; + bool flush = false; int ret = 0; local_bh_disable(); @@ -1703,12 +1704,13 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); ath9k_ps_restore(sc); break; - case IEEE80211_AMPDU_TX_STOP_CONT: case IEEE80211_AMPDU_TX_STOP_FLUSH: case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: + flush = true; + case IEEE80211_AMPDU_TX_STOP_CONT: ath9k_ps_wakeup(sc); - ath_tx_aggr_stop(sc, sta, tid); - ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); + if (ath_tx_aggr_stop(sc, sta, tid, flush)) + ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); ath9k_ps_restore(sc); break; case IEEE80211_AMPDU_TX_OPERATIONAL: diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index eab0fcb7ded6..a47bf6924efd 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -164,7 +164,20 @@ static void ath_set_rates(struct ieee80211_vif *vif, struct ieee80211_sta *sta, ARRAY_SIZE(bf->rates)); } -static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid) +static void ath_tx_clear_tid(struct ath_softc *sc, struct ath_atx_tid *tid) +{ + tid->state &= ~AGGR_ADDBA_COMPLETE; + tid->state &= ~AGGR_CLEANUP; + if (!tid->stop_cb) + return; + + ieee80211_start_tx_ba_cb_irqsafe(tid->an->vif, tid->an->sta->addr, + tid->tidno); + tid->stop_cb = false; +} + +static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid, + bool flush_packets) { struct ath_txq *txq = tid->ac->txq; struct sk_buff *skb; @@ -181,16 +194,15 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid) while ((skb = __skb_dequeue(&tid->buf_q))) { fi = get_frame_info(skb); bf = fi->bf; + if (!bf && !flush_packets) + bf = ath_tx_setup_buffer(sc, txq, tid, skb); if (!bf) { - bf = ath_tx_setup_buffer(sc, txq, tid, skb); - if (!bf) { - ieee80211_free_txskb(sc->hw, skb); - continue; - } + ieee80211_free_txskb(sc->hw, skb); + continue; } - if (fi->retries) { + if (fi->retries || flush_packets) { list_add_tail(&bf->list, &bf_head); ath_tx_update_baw(sc, tid, bf->bf_state.seqno); ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0); @@ -201,12 +213,10 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid) } } - if (tid->baw_head == tid->baw_tail) { - tid->state &= ~AGGR_ADDBA_COMPLETE; - tid->state &= ~AGGR_CLEANUP; - } + if (tid->baw_head == tid->baw_tail) + ath_tx_clear_tid(sc, tid); - if (sendbar) { + if (sendbar && !flush_packets) { ath_txq_unlock(sc, txq); ath_send_bar(tid, tid->seq_start); ath_txq_lock(sc, txq); @@ -602,7 +612,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, } if (tid->state & AGGR_CLEANUP) - ath_tx_flush_tid(sc, tid); + ath_tx_flush_tid(sc, tid, false); rcu_read_unlock(); @@ -1256,18 +1266,23 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, return 0; } -void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid) +bool ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, + bool flush) { struct ath_node *an = (struct ath_node *)sta->drv_priv; struct ath_atx_tid *txtid = ATH_AN_2_TID(an, tid); struct ath_txq *txq = txtid->ac->txq; + bool ret = !flush; + + if (flush) + txtid->stop_cb = false; if (txtid->state & AGGR_CLEANUP) - return; + return false; if (!(txtid->state & AGGR_ADDBA_COMPLETE)) { txtid->state &= ~AGGR_ADDBA_PROGRESS; - return; + return ret; } ath_txq_lock(sc, txq); @@ -1279,13 +1294,17 @@ void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid) * TID can only be reused after all in-progress subframes have been * completed. */ - if (txtid->baw_head != txtid->baw_tail) + if (txtid->baw_head != txtid->baw_tail) { txtid->state |= AGGR_CLEANUP; - else + ret = false; + txtid->stop_cb = !flush; + } else { txtid->state &= ~AGGR_ADDBA_COMPLETE; + } - ath_tx_flush_tid(sc, txtid); + ath_tx_flush_tid(sc, txtid, flush); ath_txq_unlock_complete(sc, txq); + return ret; } void ath_tx_aggr_sleep(struct ieee80211_sta *sta, struct ath_softc *sc, @@ -2415,6 +2434,7 @@ void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an) tid->ac = &an->ac[acno]; tid->state &= ~AGGR_ADDBA_COMPLETE; tid->state &= ~AGGR_ADDBA_PROGRESS; + tid->stop_cb = false; } for (acno = 0, ac = &an->ac[acno]; @@ -2451,8 +2471,7 @@ void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an) } ath_tid_drain(sc, txq, tid); - tid->state &= ~AGGR_ADDBA_COMPLETE; - tid->state &= ~AGGR_CLEANUP; + ath_tx_clear_tid(sc, tid); ath_txq_unlock(sc, txq); } -- cgit v1.2.3 From 0c585dda3574e40f562c362eaa326a98b1e49d02 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 17 May 2013 12:58:25 +0200 Subject: ath9k: fix rate handling/reporting This patch fixes some issues introduced in the rate control API rework. When not running aggregation, copy bf->rates into info->control.rates before applying the rate control status to it. In ath_lookup_rate, the rates need to be pulled from bf->rates, not the tx info. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index a47bf6924efd..ad6e0b306c37 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -630,6 +630,7 @@ static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq, struct ath_tx_status *ts, struct ath_buf *bf, struct list_head *bf_head) { + struct ieee80211_tx_info *info; bool txok, flush; txok = !(ts->ts_status & ATH9K_TXERR_MASK); @@ -641,8 +642,12 @@ static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq, txq->axq_ampdu_depth--; if (!bf_isampdu(bf)) { - if (!flush) + if (!flush) { + info = IEEE80211_SKB_CB(bf->bf_mpdu); + memcpy(info->control.rates, bf->rates, + sizeof(info->control.rates)); ath_tx_rc_status(sc, bf, ts, 1, txok ? 0 : 1, txok); + } ath_tx_complete_buf(sc, bf, txq, bf_head, ts, txok); } else ath_tx_complete_aggr(sc, txq, bf, bf_head, ts, txok); @@ -686,7 +691,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf, skb = bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); - rates = tx_info->control.rates; + rates = bf->rates; /* * Find the lowest frame length among the rate series that will have a -- cgit v1.2.3 From 6bb4880d9ef30375da4507aeabd6dc261a2c6c2b Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 17 May 2013 12:58:26 +0200 Subject: ath9k: fix draining aggregation tid buffers After a tx attempt, an A-MPDU subframe can still have fi->retries at 0 (if the retry count wasn't incremented due to powersave). In that case it is still tracked as part of the block ack window, so when draining the tid queue, its sequence number needs to be cleared from the pending frame bitmap. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index ad6e0b306c37..14bb3354ea64 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -287,9 +287,7 @@ static void ath_tid_drain(struct ath_softc *sc, struct ath_txq *txq, list_add_tail(&bf->list, &bf_head); - if (fi->retries) - ath_tx_update_baw(sc, tid, bf->bf_state.seqno); - + ath_tx_update_baw(sc, tid, bf->bf_state.seqno); ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0); } -- cgit v1.2.3 From bda97ed39b075e8ac125d4af7cdf60ca19449a16 Mon Sep 17 00:00:00 2001 From: Libo Chen Date: Fri, 17 May 2013 05:21:31 +0000 Subject: MIPS: Xway: Fix clk leak When gptu_r32 fails, we should put clk before returning. Signed-off-by: Libo Chen Acked-by: John Crispin Cc: grant.likely@linaro.org Cc: rob.herring@calxeda.com, Cc: linux-mips@linux-mips.org Cc: LKML linux-kernel@vger.kernel.org Cc: Andrew Morton akpm@linux-foundation.org Cc: Li Zefan lizefan@huawei.com Patchwork: https://patchwork.linux-mips.org/patch/5247/ Signed-off-by: Ralf Baechle --- arch/mips/lantiq/xway/gptu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/lantiq/xway/gptu.c b/arch/mips/lantiq/xway/gptu.c index 9861c8669fab..4fa577c1ddfd 100644 --- a/arch/mips/lantiq/xway/gptu.c +++ b/arch/mips/lantiq/xway/gptu.c @@ -169,6 +169,8 @@ static int gptu_probe(struct platform_device *pdev) if (((gptu_r32(GPTU_ID) >> 8) & 0xff) != GPTU_MAGIC) { dev_err(&pdev->dev, "Failed to find magic\n"); gptu_hwexit(); + clk_disable(clk); + clk_put(clk); return -ENAVAIL; } -- cgit v1.2.3 From e84ff42500a2b909d8aaca9a6df84c0616df121f Mon Sep 17 00:00:00 2001 From: EunBong Song Date: Mon, 13 May 2013 00:16:55 +0000 Subject: MIPS: Fix build error for crash_dump.c in 3.10-rc1 This patch fixes crash_dump.c build error. Build error logs are as follow. arch/mips/kernel/crash_dump.c: In function 'kdump_buf_page_init': arch/mips/kernel/crash_dump.c:67: error: implicit declaration of function 'kmalloc' arch/mips/kernel/crash_dump.c:67: error: assignment makes pointer from integer without a cast Signed-off-by: EunBong Song Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5238/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/crash_dump.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/kernel/crash_dump.c b/arch/mips/kernel/crash_dump.c index 35bed0d2342c..3be9e7bb30ff 100644 --- a/arch/mips/kernel/crash_dump.c +++ b/arch/mips/kernel/crash_dump.c @@ -2,6 +2,7 @@ #include #include #include +#include static int __init parse_savemaxmem(char *p) { -- cgit v1.2.3 From 49c426ba445f83d304a5eab3d49efa123329cf2b Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 7 May 2013 17:11:16 +0000 Subject: MIPS: Make virt_to_phys() work for all unmapped addresses. As reported: This problem was discovered when doing BGP traffic with the TCP MD5 option activated, where the following call chain caused a crash: * tcp_v4_rcv * tcp_v4_timewait_ack * tcp_v4_send_ack -> follow stack variable rep.th * tcp_v4_md5_hash_hdr * tcp_md5_hash_header * sg_init_one * sg_set_buf * virt_to_page I noticed that tcp_v4_send_reset uses a similar stack variable and also calls tcp_v4_md5_hash_hdr, so it has the same problem. The networking core can indirectly call virt_to_phys() on stack addresses, if this is done from PID 0, the stack will usually be in CKSEG0, so virt_to_phys() needs to work there as well Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Cc: Jiang Liu Cc: eunb.song@samsung.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5220/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/io.h | 2 +- arch/mips/include/asm/page.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index 1be13727323f..b7e59853fd33 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -118,7 +118,7 @@ static inline void set_io_port_base(unsigned long base) */ static inline unsigned long virt_to_phys(volatile const void *address) { - return (unsigned long)address - PAGE_OFFSET + PHYS_OFFSET; + return __pa(address); } /* diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index eab99e536b5c..ec1ca537fbc1 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -46,7 +46,6 @@ #endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */ #include -#include extern void build_clear_page(void); extern void build_copy_page(void); @@ -151,6 +150,7 @@ typedef struct { unsigned long pgprot; } pgprot_t; ((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET) #endif #define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET)) +#include /* * RELOC_HIDE was originally added by 6007b903dfe5f1d13e0c711ac2894bdd4a61b1ad -- cgit v1.2.3 From d552b233f692416d63bb93eb35bf24e5c95c7e0b Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Thu, 9 May 2013 09:36:57 +0000 Subject: MIPS: MSP71xx: remove inline marking of EXPORT_SYMBOL functions EXPORT_SYMBOL and inline directives are contradictory to each other. The patch fixes this inconsistency. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: trivial@kernel.org Cc: ldv-project@linuxtesting.org Patchwork: https://patchwork.linux-mips.org/patch/5227/ Signed-off-by: Ralf Baechle --- arch/mips/pmcs-msp71xx/msp_prom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/pmcs-msp71xx/msp_prom.c b/arch/mips/pmcs-msp71xx/msp_prom.c index 0edb89a63516..1c9897531660 100644 --- a/arch/mips/pmcs-msp71xx/msp_prom.c +++ b/arch/mips/pmcs-msp71xx/msp_prom.c @@ -83,7 +83,7 @@ static inline unsigned char str2hexnum(unsigned char c) return 0; /* foo */ } -static inline int str2eaddr(unsigned char *ea, unsigned char *str) +int str2eaddr(unsigned char *ea, unsigned char *str) { int index = 0; unsigned char num = 0; -- cgit v1.2.3 From 7138143972b7c293267c783fc99a194f0ceff7f2 Mon Sep 17 00:00:00 2001 From: "Gomella, Andrew (NIH/NHLBI) [F]" Date: Fri, 17 May 2013 17:39:46 +0000 Subject: USB: ftdi_sio: Add support for Newport CONEX motor drivers Here are two more devices that use FTDI USB-to-serial chips with new product ID's. The devices are the Newport Conex-AGP and Conex-CC motor controllers. (http://www.newport.com/CONEX-AGP-Integrated-Piezo-Motor-Rotation-Stages-/987623/1033/info.aspx) (http://www.newport.com/CONEX-CC-DC-Servo-Controller-Actuators/934114/1033/info.aspx) usb-devices command yields: P: Vendor=104d ProdID=3002 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-CC as well as P: Vendor=104d ProdID=3006 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-AGP Signed-off-by: Andrew Gomella Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio_ids.h | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index a62a75a679cd..7260ec660347 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -189,6 +189,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_BOOST_PID) }, { USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) }, + { USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_CC_PID) }, + { USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_AGP_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 98528270c43c..6dd79253205d 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -772,6 +772,8 @@ */ #define NEWPORT_VID 0x104D #define NEWPORT_AGILIS_PID 0x3000 +#define NEWPORT_CONEX_CC_PID 0x3002 +#define NEWPORT_CONEX_AGP_PID 0x3006 /* Interbiometrics USB I/O Board */ /* Developed for Interbiometrics by Rudolf Gugler */ -- cgit v1.2.3 From e7438c4b893e87311d2fb0facb3e6a0df17abe01 Mon Sep 17 00:00:00 2001 From: Tony Wu Date: Sun, 12 May 2013 15:04:29 +0000 Subject: MIPS: Fix sibling call handling in get_frame_info Given a function, get_frame_info() analyzes its instructions to figure out frame size and return address. get_frame_info() works as follows: 1. analyze up to 128 instructions if the function size is unknown 2. search for 'addiu/daddiu sp,sp,-immed' for frame size 3. search for 'sw ra,offset(sp)' for return address 4. end search when it sees jr/jal/jalr This leads to an issue when the given function is a sibling call, example shown as follows. 801ca110 : 801ca110: 8f820000 lw v0,0(gp) 801ca114: 8c420000 lw v0,0(v0) 801ca118: 080726f0 j 801c9bc0 <__schedule> 801ca11c: 00000000 nop 801ca120 : 801ca120: 27bdffe8 addiu sp,sp,-24 801ca124: 3c028022 lui v0,0x8022 801ca128: afbf0014 sw ra,20(sp) In this case, get_frame_info() cannot properly detect schedule's frame info, and eventually returns io_schedule's instead. This patch adds 'j' to the end search condition to workaround sibling call cases. Signed-off-by: Tony Wu Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5236/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/process.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index eb902c1f0cad..785bf2a4129a 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -264,7 +264,7 @@ static inline int is_ra_save_ins(union mips_instruction *ip) #endif } -static inline int is_jal_jalr_jr_ins(union mips_instruction *ip) +static inline int is_jump_ins(union mips_instruction *ip) { #ifdef CONFIG_CPU_MICROMIPS /* @@ -288,6 +288,8 @@ static inline int is_jal_jalr_jr_ins(union mips_instruction *ip) return 0; return (((ip->u_format.uimmediate >> 6) & mm_jalr_op) == mm_jalr_op); #else + if (ip->j_format.opcode == j_op) + return 1; if (ip->j_format.opcode == jal_op) return 1; if (ip->r_format.opcode != spec_op) @@ -350,7 +352,7 @@ static int get_frame_info(struct mips_frame_info *info) for (i = 0; i < max_insns; i++, ip++) { - if (is_jal_jalr_jr_ins(ip)) + if (is_jump_ins(ip)) break; if (!info->frame_size) { if (is_sp_move_ins(ip)) -- cgit v1.2.3 From 5000653e923de49aa282fd7d172eb6528c3ec5c7 Mon Sep 17 00:00:00 2001 From: Tony Wu Date: Sun, 12 May 2013 15:05:34 +0000 Subject: MIPS: Extract schedule_mfi info from __schedule schedule_mfi is supposed to be extracted from schedule(), and is used in thread_saved_pc and get_wchan. But, after optimization, schedule() is reduced to a sibling call to __schedule(), and no real frame info can be extracted. One solution is to compile schedule() with -fno-omit-frame-pointer and -fno-optimize-sibling-calls, but that will incur performance degradation. Another solution is to extract info from the real scheduler, __schedule, and this is the approache adopted here. This patch reads the __schedule address by either following the 'j' call in schedule if KALLSYMS is disabled or by using kallsyms_lookup_name to lookup __schedule if KALLSYMS is available, then, extracts schedule_mfi from __schedule frame info. This patch also fixes the "Can't analyze schedule() prologue" warning at boot time. Signed-off-by: Tony Wu Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5237/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/process.c | 34 ++++++++++++++++++++++++++++++++-- 1 file changed, 32 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 785bf2a4129a..a682a87bcc04 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -224,6 +224,9 @@ struct mips_frame_info { int pc_offset; }; +#define J_TARGET(pc,target) \ + (((unsigned long)(pc) & 0xf0000000) | ((target) << 2)) + static inline int is_ra_save_ins(union mips_instruction *ip) { #ifdef CONFIG_CPU_MICROMIPS @@ -395,15 +398,42 @@ err: static struct mips_frame_info schedule_mfi __read_mostly; +#ifdef CONFIG_KALLSYMS +static unsigned long get___schedule_addr(void) +{ + return kallsyms_lookup_name("__schedule"); +} +#else +static unsigned long get___schedule_addr(void) +{ + union mips_instruction *ip = (void *)schedule; + int max_insns = 8; + int i; + + for (i = 0; i < max_insns; i++, ip++) { + if (ip->j_format.opcode == j_op) + return J_TARGET(ip, ip->j_format.target); + } + return 0; +} +#endif + static int __init frame_info_init(void) { unsigned long size = 0; #ifdef CONFIG_KALLSYMS unsigned long ofs; +#endif + unsigned long addr; - kallsyms_lookup_size_offset((unsigned long)schedule, &size, &ofs); + addr = get___schedule_addr(); + if (!addr) + addr = (unsigned long)schedule; + +#ifdef CONFIG_KALLSYMS + kallsyms_lookup_size_offset(addr, &size, &ofs); #endif - schedule_mfi.func = schedule; + schedule_mfi.func = (void *)addr; schedule_mfi.func_size = size; get_frame_info(&schedule_mfi); -- cgit v1.2.3 From 2792d42fe69e098a6e08ed814f49953b52874805 Mon Sep 17 00:00:00 2001 From: Matthijs Kooijman Date: Thu, 9 May 2013 06:32:09 +0000 Subject: MIPS: ralink: use the dwc2 driver for the rt305x USB controller This sets up the devicetree file for the rt3050 chip series and rt3052 eval board to use the right compatible string for the dwc2 driver. Acked-by: John Crispin Cc: blogic@openwrt.org Cc: linux-mips@linux-mips.org Cc: Matthijs Kooijman Patchwork: https://patchwork.linux-mips.org/patch/5226/ Signed-off-by: Ralf Baechle --- arch/mips/ralink/dts/rt3050.dtsi | 10 ++++++++++ arch/mips/ralink/dts/rt3052_eval.dts | 4 ++++ 2 files changed, 14 insertions(+) diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi index ef7da1e227e6..e3203d414fee 100644 --- a/arch/mips/ralink/dts/rt3050.dtsi +++ b/arch/mips/ralink/dts/rt3050.dtsi @@ -55,4 +55,14 @@ reg-shift = <2>; }; }; + + usb@101c0000 { + compatible = "ralink,rt3050-usb", "snps,dwc2"; + reg = <0x101c0000 40000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + + status = "disabled"; + }; }; diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts index c18c9a84f4c4..0ac73ea28198 100644 --- a/arch/mips/ralink/dts/rt3052_eval.dts +++ b/arch/mips/ralink/dts/rt3052_eval.dts @@ -43,4 +43,8 @@ reg = <0x50000 0x7b0000>; }; }; + + usb@101c0000 { + status = "ok"; + }; }; -- cgit v1.2.3 From 3f327e39b4b8f760c331bb2836735be6d83fbf53 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 7 May 2013 11:06:03 -0600 Subject: PCI: acpiphp: Re-enumerate devices when host bridge receives Bus Check When a PCI host bridge device receives a Bus Check notification, we must re-enumerate starting with the bridge to discover changes (devices that have been added or removed). Prior to 668192b678 ("PCI: acpiphp: Move host bridge hotplug to pci_root.c"), this happened in _handle_hotplug_event_bridge(). After that commit, _handle_hotplug_event_bridge() is not installed for host bridges, and the host bridge notify handler, _handle_hotplug_event_root() did not re-enumerate. This patch adds re-enumeration to _handle_hotplug_event_root(). This fixes cases where we don't notice the addition or removal of PCI devices, e.g., the PCI-to-USB ExpressCard in the bugzilla below. [bhelgaas: changelog, references] Reference: https://lkml.kernel.org/r/CAAh6nkmbKR3HTqm5ommevsBwhL_u0N8Rk7Wsms_LfP=nBgKNew@mail.gmail.com Reference: https://bugzilla.kernel.org/show_bug.cgi?id=57961 Reported-by: Gavin Guo Tested-by: Gavin Guo Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas Reviewed-by: Jiang Liu Acked-by: Rafael J. Wysocki CC: stable@vger.kernel.org # v3.9+ --- drivers/acpi/pci_root.c | 4 +++- drivers/pci/hotplug/acpiphp_glue.c | 14 ++++++++++++++ include/linux/pci-acpi.h | 2 ++ 3 files changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 1dd6f6c85874..e427dc516c76 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -641,7 +641,9 @@ static void _handle_hotplug_event_root(struct work_struct *work) /* bus enumerate */ printk(KERN_DEBUG "%s: Bus check notify on %s\n", __func__, (char *)buffer.pointer); - if (!root) + if (root) + acpiphp_check_host_bridge(handle); + else handle_root_bridge_insertion(handle); break; diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 96fed19c6d90..716aa93fff76 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -950,6 +950,20 @@ check_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv) return AE_OK ; } +void acpiphp_check_host_bridge(acpi_handle handle) +{ + struct acpiphp_bridge *bridge; + + bridge = acpiphp_handle_to_bridge(handle); + if (bridge) { + acpiphp_check_bridge(bridge); + put_bridge(bridge); + } + + acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, + ACPI_UINT32_MAX, check_sub_bridges, NULL, NULL, NULL); +} + static void _handle_hotplug_event_bridge(struct work_struct *work) { struct acpiphp_bridge *bridge; diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h index 81b31613eb25..170447977278 100644 --- a/include/linux/pci-acpi.h +++ b/include/linux/pci-acpi.h @@ -60,11 +60,13 @@ static inline void acpi_pci_slot_remove(struct pci_bus *bus) { } void acpiphp_init(void); void acpiphp_enumerate_slots(struct pci_bus *bus, acpi_handle handle); void acpiphp_remove_slots(struct pci_bus *bus); +void acpiphp_check_host_bridge(acpi_handle handle); #else static inline void acpiphp_init(void) { } static inline void acpiphp_enumerate_slots(struct pci_bus *bus, acpi_handle handle) { } static inline void acpiphp_remove_slots(struct pci_bus *bus) { } +static inline void acpiphp_check_host_bridge(acpi_handle handle) { } #endif #else /* CONFIG_ACPI */ -- cgit v1.2.3 From 60b62978bc5e903cd487de34972fb30f76c74a2e Mon Sep 17 00:00:00 2001 From: David Sterba Date: Tue, 30 Apr 2013 17:29:29 +0000 Subject: btrfs: annotate quota tree for lockdep Quota tree has been missing from lockdep annotations, though no warning has been seen in the wild. There's currently one entry that does not belong there, BTRFS_ORPHAN_OBJECTID. No such tree exists, it's probably a copy & paste mistake, the id is defined among tree ids. Signed-off-by: David Sterba Signed-off-by: Josef Bacik --- fs/btrfs/ctree.h | 6 +++--- fs/btrfs/disk-io.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 63c328a9ce95..2720d5555883 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -88,12 +88,12 @@ struct btrfs_ordered_sum; /* holds checksums of all the data extents */ #define BTRFS_CSUM_TREE_OBJECTID 7ULL -/* for storing balance parameters in the root tree */ -#define BTRFS_BALANCE_OBJECTID -4ULL - /* holds quota configuration and tracking */ #define BTRFS_QUOTA_TREE_OBJECTID 8ULL +/* for storing balance parameters in the root tree */ +#define BTRFS_BALANCE_OBJECTID -4ULL + /* orhpan objectid for tracking unlinked/truncated files */ #define BTRFS_ORPHAN_OBJECTID -5ULL diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 4e9ebe1f1827..72b17276c255 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -152,7 +152,7 @@ static struct btrfs_lockdep_keyset { { .id = BTRFS_DEV_TREE_OBJECTID, .name_stem = "dev" }, { .id = BTRFS_FS_TREE_OBJECTID, .name_stem = "fs" }, { .id = BTRFS_CSUM_TREE_OBJECTID, .name_stem = "csum" }, - { .id = BTRFS_ORPHAN_OBJECTID, .name_stem = "orphan" }, + { .id = BTRFS_QUOTA_TREE_OBJECTID, .name_stem = "quota" }, { .id = BTRFS_TREE_LOG_OBJECTID, .name_stem = "log" }, { .id = BTRFS_TREE_RELOC_OBJECTID, .name_stem = "treloc" }, { .id = BTRFS_DATA_RELOC_TREE_OBJECTID, .name_stem = "dreloc" }, -- cgit v1.2.3 From a52f4cd2b1a863a42c1cb268b1cddad451cdfede Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Wed, 1 May 2013 16:23:41 +0000 Subject: Btrfs: fix off-by-one in fiemap lock_extent/unlock_extent expect an exclusive end. Tested-by: David Sterba Signed-off-by: Liu Bo Signed-off-by: Josef Bacik --- fs/btrfs/extent_io.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index d2ac518f90e4..3e6e410002e5 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -3989,7 +3989,7 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, last_for_get_extent = isize; } - lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + len, 0, + lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + len - 1, 0, &cached_state); em = get_extent_skip_holes(inode, start, last_for_get_extent, @@ -4076,7 +4076,7 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, out_free: free_extent_map(em); out: - unlock_extent_cached(&BTRFS_I(inode)->io_tree, start, start + len, + unlock_extent_cached(&BTRFS_I(inode)->io_tree, start, start + len - 1, &cached_state, GFP_NOFS); return ret; } -- cgit v1.2.3 From 5a7e6bd809ca2f06bd669bd477ad3d6b48a3dd9f Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 13 May 2013 00:54:31 +0000 Subject: i2c: designware: add Intel BayTrail ACPI ID This is the same controller as on Intel Lynxpoint but the ACPI ID is different (8086F41). Add support for this. Signed-off-by: Mika Westerberg Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-platdrv.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 8ec91335d95a..35b70a1edf57 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -69,6 +69,7 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev) static const struct acpi_device_id dw_i2c_acpi_match[] = { { "INT33C2", 0 }, { "INT33C3", 0 }, + { "80860F41", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match); -- cgit v1.2.3 From 53229345502bf3713cce220e849743f83065381d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 15 May 2013 02:44:10 +0000 Subject: i2c: i801: Document feature bits in modinfo Duplicate the feature bits documentation in modinfo, as not every user will read the driver's source code or documentation file. Signed-off-by: Jean Delvare Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-i801.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index e1cf2e0e1f23..3a6903f63913 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -231,7 +231,11 @@ static const char *i801_feature_names[] = { static unsigned int disable_features; module_param(disable_features, uint, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(disable_features, "Disable selected driver features"); +MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n" + "\t\t 0x01 disable SMBus PEC\n" + "\t\t 0x02 disable the block buffer\n" + "\t\t 0x08 disable the I2C block read functionality\n" + "\t\t 0x10 don't use interrupts "); /* Make sure the SMBus host is ready to start transmitting. Return 0 if it is, -EBUSY if it is not. */ -- cgit v1.2.3 From d295a86eab200b3f0c513e78dbe1f189fd32d397 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 16 May 2013 10:30:59 +0000 Subject: i2c: mv64xxx: work around signals causing I2C transactions to be aborted Do not use interruptible waits in an I2C driver; if a process uses signals (eg, Xorg uses SIGALRM and SIGPIPE) then these signals can cause the I2C driver to abort a transaction in progress by another driver, which can cause that driver to fail. I2C drivers are not expected to abort transactions on signals. Signed-off-by: Russell King Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mv64xxx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 3bbd65d35a5e..1a3abd6a0bfc 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -252,7 +252,7 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data) writel(drv_data->cntl_bits, drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); drv_data->block = 0; - wake_up_interruptible(&drv_data->waitq); + wake_up(&drv_data->waitq); break; case MV64XXX_I2C_ACTION_CONTINUE: @@ -300,7 +300,7 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data) writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP, drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); drv_data->block = 0; - wake_up_interruptible(&drv_data->waitq); + wake_up(&drv_data->waitq); break; case MV64XXX_I2C_ACTION_INVALID: @@ -315,7 +315,7 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data) writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP, drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); drv_data->block = 0; - wake_up_interruptible(&drv_data->waitq); + wake_up(&drv_data->waitq); break; } } @@ -381,7 +381,7 @@ mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data) unsigned long flags; char abort = 0; - time_left = wait_event_interruptible_timeout(drv_data->waitq, + time_left = wait_event_timeout(drv_data->waitq, !drv_data->block, drv_data->adapter.timeout); spin_lock_irqsave(&drv_data->lock, flags); -- cgit v1.2.3 From e9b526fe704812364bca07edd15eadeba163ebfb Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Fri, 17 May 2013 14:56:35 +0200 Subject: i2c: suppress lockdep warning on delete_device i2c: suppress lockdep warning on delete_device Since commit 846f99749ab68bbc7f75c74fec305de675b1a1bf the following lockdep warning is thrown in case i2c device is removed (via delete_device sysfs attribute) which contains subdevices (e.g. i2c multiplexer): ============================================= [ INFO: possible recursive locking detected ] 3.8.7-0-sampleversion-fct #8 Tainted: G O --------------------------------------------- bash/3743 is trying to acquire lock: (s_active#110){++++.+}, at: [] sysfs_hash_and_remove+0x58/0xc8 but task is already holding lock: (s_active#110){++++.+}, at: [] sysfs_write_file+0xc8/0x208 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(s_active#110); lock(s_active#110); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by bash/3743: #0: (&buffer->mutex){+.+.+.}, at: [] sysfs_write_file+0x4c/0x208 #1: (s_active#110){++++.+}, at: [] sysfs_write_file+0xc8/0x208 #2: (&adap->userspace_clients_lock/1){+.+.+.}, at: [] i2c_sysfs_delete_device+0x90/0x238 #3: (&__lockdep_no_validate__){......}, at: [] device_release_driver+0x24/0x48 stack backtrace: Call Trace: [] dump_stack+0x8/0x34 [] __lock_acquire+0x161c/0x2110 [] lock_acquire+0x4c/0x70 [] sysfs_addrm_finish+0x19c/0x1e0 [] sysfs_hash_and_remove+0x58/0xc8 [] sysfs_remove_group+0x64/0x148 [] device_remove_attrs+0x9c/0x1a8 [] device_del+0x104/0x1d8 [] device_unregister+0x28/0x70 [] i2c_del_adapter+0x1cc/0x328 [] i2c_del_mux_adapter+0x14/0x38 [] pca954x_remove+0x90/0xe0 [pca954x] [] i2c_device_remove+0x80/0xe8 [] __device_release_driver+0x74/0xf8 [] device_release_driver+0x2c/0x48 [] bus_remove_device+0x13c/0x1d8 [] device_del+0x10c/0x1d8 [] device_unregister+0x28/0x70 [] i2c_sysfs_delete_device+0x180/0x238 [] sysfs_write_file+0xe4/0x208 [] vfs_write+0xbc/0x160 [] SyS_write+0x54/0xd8 [] handle_sys64+0x44/0x64 The problem is already known for USB and PCI subsystems. The reason is that delete_device attribute is defined statically in i2c-core.c and used for all devices in i2c subsystem. Discussion of original USB problem: http://lkml.indiana.edu/hypermail/linux/kernel/1204.3/01160.html Commit 356c05d58af05d582e634b54b40050c73609617b introduced new macro to suppress lockdep warnings for this special case and included workaround for USB code. LKML discussion of the workaround: http://lkml.indiana.edu/hypermail/linux/kernel/1205.1/03634.html As i2c case is in principle the same, the same workaround could be used here. Signed-off-by: Alexander Sverdlin Acked-by: Alan Stern Cc: Eric W. Biederman Cc: Tejun Heo Cc: Peter Zijlstra Cc: Greg Kroah-Hartman Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 6b63cc7eb71e..48e31ed69dbf 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -892,7 +892,8 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device); -static DEVICE_ATTR(delete_device, S_IWUSR, NULL, i2c_sysfs_delete_device); +static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, S_IWUSR, NULL, + i2c_sysfs_delete_device); static struct attribute *i2c_adapter_attrs[] = { &dev_attr_name.attr, -- cgit v1.2.3 From 642f2ecc092f4d2d5a9b7219090531508017c324 Mon Sep 17 00:00:00 2001 From: Matthijs Kooijman Date: Fri, 17 May 2013 10:52:55 +0200 Subject: staging: dwc2: Fix dma-enabled platform devices using a default dma_mask Platform devices added through OF usually do not have any dma_mask pointer set. If the hardware advertises DMA support, the driver will expect DMA buffers to be passed in, but the USB core will not do this due to lack of a dma mask, breaking all connectiviy. To fix this, set a default dma_mask by pointing it at the coherent_dma_mask and set their value to a 32 bit mask. This still allows any platform code to set any more specific mask if needed, but makes the driver work for most dma-enabled hardware. It would be great if this patch could be included in 3.10, since it is needed to make the dwc2 driver work on the ralink rt3052 target. Before, the plan was to set up the dma mask in MIPS platform code, but because of a similar change in ehci and the uglyness of the code for that, the plan for that infrastructure was dropped. This patch makes the setting of the dma_mask happen in the same way as the patch Stephen Warren (set device dma_mask without reference to global data). Signed-off-by: Matthijs Kooijman Acked-by: Paul Zimmerman Signed-off-by: Greg Kroah-Hartman --- drivers/staging/dwc2/platform.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/staging/dwc2/platform.c b/drivers/staging/dwc2/platform.c index 1f3d581a1078..afc515bd8233 100644 --- a/drivers/staging/dwc2/platform.c +++ b/drivers/staging/dwc2/platform.c @@ -95,6 +95,14 @@ static int dwc2_driver_probe(struct platform_device *dev) hsotg->dev = &dev->dev; + /* + * Use reasonable defaults so platforms don't have to provide these. + */ + if (!dev->dev.dma_mask) + dev->dev.dma_mask = &dev->dev.coherent_dma_mask; + if (!dev->dev.coherent_dma_mask) + dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + irq = platform_get_irq(dev, 0); if (irq < 0) { dev_err(&dev->dev, "missing IRQ resource\n"); -- cgit v1.2.3 From e5f5e380e0f3bb11f04ca5bc66a551e58e0ad26e Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 16 May 2013 22:25:34 +0000 Subject: gianfar: add missing iounmap() on error in gianfar_ptp_probe() Add the missing iounmap() before return from gianfar_ptp_probe() in the error handling case. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar_ptp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c index 576e4b858fce..083ea2b4d20a 100644 --- a/drivers/net/ethernet/freescale/gianfar_ptp.c +++ b/drivers/net/ethernet/freescale/gianfar_ptp.c @@ -524,6 +524,7 @@ static int gianfar_ptp_probe(struct platform_device *dev) return 0; no_clock: + iounmap(etsects->regs); no_ioremap: release_resource(etsects->rsrc); no_resource: -- cgit v1.2.3 From 03b71c6ca6286625d8f1ed44aabab9b5bf5dac10 Mon Sep 17 00:00:00 2001 From: Gabriel de Perthuis Date: Mon, 6 May 2013 17:40:18 +0000 Subject: btrfs: don't stop searching after encountering the wrong item The search ioctl skips items that are too large for a result buffer, but inline items of a certain size occuring before any search result is found would trigger an overflow and stop the search entirely. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=57641 Cc: stable@vger.kernel.org Signed-off-by: Gabriel de Perthuis Signed-off-by: Josef Bacik --- fs/btrfs/ioctl.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 0de4a2fcfb24..0f81d67cdc8d 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1801,7 +1801,11 @@ static noinline int copy_to_sk(struct btrfs_root *root, item_off = btrfs_item_ptr_offset(leaf, i); item_len = btrfs_item_size_nr(leaf, i); - if (item_len > BTRFS_SEARCH_ARGS_BUFSIZE) + btrfs_item_key_to_cpu(leaf, key, i); + if (!key_in_sk(key, sk)) + continue; + + if (sizeof(sh) + item_len > BTRFS_SEARCH_ARGS_BUFSIZE) item_len = 0; if (sizeof(sh) + item_len + *sk_offset > @@ -1810,10 +1814,6 @@ static noinline int copy_to_sk(struct btrfs_root *root, goto overflow; } - btrfs_item_key_to_cpu(leaf, key, i); - if (!key_in_sk(key, sk)) - continue; - sh.objectid = key->objectid; sh.offset = key->offset; sh.type = key->type; -- cgit v1.2.3 From 69a85bd87cc81bcbd36730d4a1214c12fdb8a548 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 8 May 2013 13:30:11 -0400 Subject: Btrfs: don't null pointer deref on abort I'm sorry, theres no excuse for this sort of work. We need to use root->leafsize since eb may be NULL. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/disk-io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 72b17276c255..e8b29da30154 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -3808,7 +3808,7 @@ static int btrfs_destroy_marked_extents(struct btrfs_root *root, while (start <= end) { eb = btrfs_find_tree_block(root, start, root->leafsize); - start += eb->len; + start += root->leafsize; if (!eb) continue; wait_on_extent_buffer_writeback(eb); -- cgit v1.2.3 From 73e1e61fb85ab206854b6d87ff31733628bb8d72 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 8 May 2013 16:44:57 -0400 Subject: Btrfs: remove warn on in free space cache writeout This catches block groups that are too large to properly cache. We deal with this case fine, so the warning just confuses users. Remove the warning. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/free-space-cache.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index ecca6c7375a6..6a8bb9c79674 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -920,10 +920,8 @@ static int __btrfs_write_out_cache(struct btrfs_root *root, struct inode *inode, /* Make sure we can fit our crcs into the first page */ if (io_ctl.check_crcs && - (io_ctl.num_pages * sizeof(u32)) >= PAGE_CACHE_SIZE) { - WARN_ON(1); + (io_ctl.num_pages * sizeof(u32)) >= PAGE_CACHE_SIZE) goto out_nospc; - } io_ctl_set_generation(&io_ctl, trans->transid); -- cgit v1.2.3 From b1c79e0947e0c190f865e2eb7b84a0fea0021cec Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 9 May 2013 13:49:30 -0400 Subject: Btrfs: handle running extent ops with skinny metadata Chris hit a bug where we weren't finding extent records when running extent ops. This is because we use the delayed_ref_head when running the extent op, which means we can't use the ->type checks to see if we are metadata. We also lose the level of the metadata we are working on. So to fix this we can just check the ->is_data section of the extent_op, and we can store the level of the buffer we were modifying in the extent_op. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/ctree.c | 4 +++- fs/btrfs/ctree.h | 2 +- fs/btrfs/delayed-ref.h | 1 + fs/btrfs/extent-tree.c | 15 +++++++-------- 4 files changed, 12 insertions(+), 10 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index de6de8e60b46..02fae7f7e42c 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -951,10 +951,12 @@ static noinline int update_ref_for_cow(struct btrfs_trans_handle *trans, BUG_ON(ret); /* -ENOMEM */ } if (new_flags != 0) { + int level = btrfs_header_level(buf); + ret = btrfs_set_disk_extent_flags(trans, root, buf->start, buf->len, - new_flags, 0); + new_flags, level, 0); if (ret) return ret; } diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 2720d5555883..d6dd49b51ba8 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -3075,7 +3075,7 @@ int btrfs_dec_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root, int btrfs_set_disk_extent_flags(struct btrfs_trans_handle *trans, struct btrfs_root *root, u64 bytenr, u64 num_bytes, u64 flags, - int is_data); + int level, int is_data); int btrfs_free_extent(struct btrfs_trans_handle *trans, struct btrfs_root *root, u64 bytenr, u64 num_bytes, u64 parent, u64 root_objectid, diff --git a/fs/btrfs/delayed-ref.h b/fs/btrfs/delayed-ref.h index f75fcaf79aeb..70b962cc177d 100644 --- a/fs/btrfs/delayed-ref.h +++ b/fs/btrfs/delayed-ref.h @@ -60,6 +60,7 @@ struct btrfs_delayed_ref_node { struct btrfs_delayed_extent_op { struct btrfs_disk_key key; u64 flags_to_set; + int level; unsigned int update_key:1; unsigned int update_flags:1; unsigned int is_data:1; diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 2305b5c5cf00..c4c94b30c729 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2070,8 +2070,7 @@ static int run_delayed_extent_op(struct btrfs_trans_handle *trans, u32 item_size; int ret; int err = 0; - int metadata = (node->type == BTRFS_TREE_BLOCK_REF_KEY || - node->type == BTRFS_SHARED_BLOCK_REF_KEY); + int metadata = !extent_op->is_data; if (trans->aborted) return 0; @@ -2086,11 +2085,8 @@ static int run_delayed_extent_op(struct btrfs_trans_handle *trans, key.objectid = node->bytenr; if (metadata) { - struct btrfs_delayed_tree_ref *tree_ref; - - tree_ref = btrfs_delayed_node_to_tree_ref(node); key.type = BTRFS_METADATA_ITEM_KEY; - key.offset = tree_ref->level; + key.offset = extent_op->level; } else { key.type = BTRFS_EXTENT_ITEM_KEY; key.offset = node->num_bytes; @@ -2719,7 +2715,7 @@ out: int btrfs_set_disk_extent_flags(struct btrfs_trans_handle *trans, struct btrfs_root *root, u64 bytenr, u64 num_bytes, u64 flags, - int is_data) + int level, int is_data) { struct btrfs_delayed_extent_op *extent_op; int ret; @@ -2732,6 +2728,7 @@ int btrfs_set_disk_extent_flags(struct btrfs_trans_handle *trans, extent_op->update_flags = 1; extent_op->update_key = 0; extent_op->is_data = is_data ? 1 : 0; + extent_op->level = level; ret = btrfs_add_delayed_extent_op(root->fs_info, trans, bytenr, num_bytes, extent_op); @@ -6763,6 +6760,7 @@ struct extent_buffer *btrfs_alloc_free_block(struct btrfs_trans_handle *trans, extent_op->update_key = 1; extent_op->update_flags = 1; extent_op->is_data = 0; + extent_op->level = level; ret = btrfs_add_delayed_tree_ref(root->fs_info, trans, ins.objectid, @@ -6934,7 +6932,8 @@ static noinline int walk_down_proc(struct btrfs_trans_handle *trans, ret = btrfs_dec_ref(trans, root, eb, 0, wc->for_reloc); BUG_ON(ret); /* -ENOMEM */ ret = btrfs_set_disk_extent_flags(trans, root, eb->start, - eb->len, flag, 0); + eb->len, flag, + btrfs_header_level(eb), 0); BUG_ON(ret); /* -ENOMEM */ wc->flags[level] |= flag; } -- cgit v1.2.3 From 49688107527a24b0ed3780576257a1225902180b Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Tue, 7 May 2013 17:28:03 +0000 Subject: Btrfs: don't allow device replace on RAID5/RAID6 This is not yet supported and causes crashes. One sad user reported that it destroyed his filesystem. One failure is in __btrfs_map_block+0xc1f calling kmalloc(0). 0x5f21f is in __btrfs_map_block (fs/btrfs/volumes.c:4923). 4918 num_stripes = map->num_stripes; 4919 max_errors = nr_parity_stripes(map); 4920 4921 raid_map = kmalloc(sizeof(u64) * num_stripes, 4922 GFP_NOFS); 4923 if (!raid_map) { 4924 ret = -ENOMEM; 4925 goto out; 4926 } 4927 There might be more issues. Until this is really tested, don't allow users to start the procedure on RAID5/RAID6 filesystems. Signed-off-by: Stefan Behrens Signed-off-by: Josef Bacik --- fs/btrfs/dev-replace.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c index 7ba7b3900cb8..65241f32d3f8 100644 --- a/fs/btrfs/dev-replace.c +++ b/fs/btrfs/dev-replace.c @@ -313,6 +313,11 @@ int btrfs_dev_replace_start(struct btrfs_root *root, struct btrfs_device *tgt_device = NULL; struct btrfs_device *src_device = NULL; + if (btrfs_fs_incompat(fs_info, RAID56)) { + pr_warn("btrfs: dev_replace cannot yet handle RAID5/RAID6\n"); + return -EINVAL; + } + switch (args->start.cont_reading_from_srcdev_mode) { case BTRFS_IOCTL_DEV_REPLACE_CONT_READING_FROM_SRCDEV_MODE_ALWAYS: case BTRFS_IOCTL_DEV_REPLACE_CONT_READING_FROM_SRCDEV_MODE_AVOID: -- cgit v1.2.3 From c16c2e2e51c2f0951fffa73c343b8fcb641108ba Mon Sep 17 00:00:00 2001 From: Wang Shilong Date: Wed, 8 May 2013 08:10:25 +0000 Subject: Btrfs: fix possible memory leak in the find_parent_nodes() In the find_parent_nodes(), if read_tree_block() fails, we can not return directly, we should free some allocated memory otherwise memory leak happens. Signed-off-by: Wang Shilong Signed-off-by: Josef Bacik --- fs/btrfs/backref.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index b4fb41558111..290e347b6db3 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -918,7 +918,8 @@ again: ref->parent, bsz, 0); if (!eb || !extent_buffer_uptodate(eb)) { free_extent_buffer(eb); - return -EIO; + ret = -EIO; + goto out; } ret = find_extent_in_eb(eb, bytenr, *extent_item_pos, &eie); -- cgit v1.2.3 From 379cde741b220091d2124fb500b178b90ad7f460 Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Wed, 8 May 2013 08:56:09 +0000 Subject: Btrfs: fix possible memory leak in replace_path() In replace_path(), if read_tree_block() fails, we cannot return directly, we should free some allocated memory otherwise memory leak happens. Similar to Wang's "Btrfs: fix possible memory leak in the find_parent_nodes()" patch, the current commit fixes an issue that is related to the "Btrfs: fix all callers of read_tree_block" commit. Signed-off-by: Stefan Behrens Signed-off-by: Josef Bacik --- fs/btrfs/relocation.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 704a1b8d2a2b..5c5b8bb44ee5 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -1773,7 +1773,7 @@ again: if (!eb || !extent_buffer_uptodate(eb)) { ret = (!eb) ? -ENOMEM : -EIO; free_extent_buffer(eb); - return ret; + break; } btrfs_tree_lock(eb); if (cow) { -- cgit v1.2.3 From 8250dabedb633e162bce89f2aacf5e65fa9e6464 Mon Sep 17 00:00:00 2001 From: Andreas Philipp Date: Sat, 11 May 2013 11:13:03 +0000 Subject: Correct allowed raid levels on balance. Raid5 with 3 devices is well defined while the old logic allowed raid5 only with a minimum of 4 devices when converting the block group profile via btrfs balance. Creating a raid5 with just three devices using mkfs.btrfs worked always as expected. This is now fixed and the whole logic is rewritten. Signed-off-by: Andreas Philipp Signed-off-by: Josef Bacik --- fs/btrfs/volumes.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index a191bac31d85..062e93069c5e 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -3120,14 +3120,13 @@ int btrfs_balance(struct btrfs_balance_control *bctl, allowed = BTRFS_AVAIL_ALLOC_BIT_SINGLE; if (num_devices == 1) allowed |= BTRFS_BLOCK_GROUP_DUP; - else if (num_devices < 4) + else if (num_devices > 1) allowed |= (BTRFS_BLOCK_GROUP_RAID0 | BTRFS_BLOCK_GROUP_RAID1); - else - allowed |= (BTRFS_BLOCK_GROUP_RAID0 | BTRFS_BLOCK_GROUP_RAID1 | - BTRFS_BLOCK_GROUP_RAID10 | - BTRFS_BLOCK_GROUP_RAID5 | - BTRFS_BLOCK_GROUP_RAID6); - + if (num_devices > 2) + allowed |= BTRFS_BLOCK_GROUP_RAID5; + if (num_devices > 3) + allowed |= (BTRFS_BLOCK_GROUP_RAID10 | + BTRFS_BLOCK_GROUP_RAID6); if ((bctl->data.flags & BTRFS_BALANCE_ARGS_CONVERT) && (!alloc_profile_is_valid(bctl->data.target, 1) || (bctl->data.target & ~allowed))) { -- cgit v1.2.3 From 7cfa9e51d2948ae90e7599cc114dcce2c7c2b1fc Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Mon, 13 May 2013 13:55:08 +0000 Subject: Btrfs: don't abort the current transaction if there is no enough space for inode cache The filesystem with inode cache was forced to be read-only when we umounted it. Steps to reproduce: # mkfs.btrfs -f ${DEV} # mount -o inode_cache ${DEV} ${MNT} # dd if=/dev/zero of=${MNT}/file1 bs=1M count=8192 # btrfs fi syn ${MNT} # dd if=${MNT}/file1 of=/dev/null bs=1M # rm -f ${MNT}/file1 # btrfs fi syn ${MNT} # umount ${MNT} It is because there was no enough space to do inode cache truncation, and then we aborted the current transaction. But no space error is not a serious problem when we write out the inode cache, and it is safe that we just skip this step if we meet this problem. So we need not abort the current transaction. Reported-by: Tsutomu Itoh Signed-off-by: Miao Xie Tested-by: Tsutomu Itoh Signed-off-by: Josef Bacik --- fs/btrfs/inode-map.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c index d26f67a59e36..9818d4a3f829 100644 --- a/fs/btrfs/inode-map.c +++ b/fs/btrfs/inode-map.c @@ -468,7 +468,8 @@ again: if (i_size_read(inode) > 0) { ret = btrfs_truncate_free_space_cache(root, trans, path, inode); if (ret) { - btrfs_abort_transaction(trans, root, ret); + if (ret != -ENOSPC) + btrfs_abort_transaction(trans, root, ret); goto out_put; } } -- cgit v1.2.3 From 7b61cd92242542944fc27024900c495a6a7b3396 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Mon, 13 May 2013 13:55:09 +0000 Subject: Btrfs: don't use global block reservation for inode cache truncation It is very likely that there are lots of subvolumes/snapshots in the filesystem, so if we use global block reservation to do inode cache truncation, we may hog all the free space that is reserved in global rsv. So it is better that we do the free space reservation for inode cache truncation by ourselves. Cc: Tsutomu Itoh Signed-off-by: Miao Xie Signed-off-by: Josef Bacik --- fs/btrfs/extent-tree.c | 5 +++++ fs/btrfs/free-space-cache.c | 39 +++++++++++++++++++-------------------- fs/btrfs/free-space-cache.h | 2 ++ fs/btrfs/inode-map.c | 5 +++-- fs/btrfs/relocation.c | 5 +++++ 5 files changed, 34 insertions(+), 22 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index c4c94b30c729..162a66bfbffd 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3106,6 +3106,11 @@ again: WARN_ON(ret); if (i_size_read(inode) > 0) { + ret = btrfs_check_trunc_cache_free_space(root, + &root->fs_info->global_block_rsv); + if (ret) + goto out_put; + ret = btrfs_truncate_free_space_cache(root, trans, path, inode); if (ret) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 6a8bb9c79674..e53009657f0e 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -197,30 +197,32 @@ int create_free_space_inode(struct btrfs_root *root, block_group->key.objectid); } -int btrfs_truncate_free_space_cache(struct btrfs_root *root, - struct btrfs_trans_handle *trans, - struct btrfs_path *path, - struct inode *inode) +int btrfs_check_trunc_cache_free_space(struct btrfs_root *root, + struct btrfs_block_rsv *rsv) { - struct btrfs_block_rsv *rsv; u64 needed_bytes; - loff_t oldsize; - int ret = 0; - - rsv = trans->block_rsv; - trans->block_rsv = &root->fs_info->global_block_rsv; + int ret; /* 1 for slack space, 1 for updating the inode */ needed_bytes = btrfs_calc_trunc_metadata_size(root, 1) + btrfs_calc_trans_metadata_size(root, 1); - spin_lock(&trans->block_rsv->lock); - if (trans->block_rsv->reserved < needed_bytes) { - spin_unlock(&trans->block_rsv->lock); - trans->block_rsv = rsv; - return -ENOSPC; - } - spin_unlock(&trans->block_rsv->lock); + spin_lock(&rsv->lock); + if (rsv->reserved < needed_bytes) + ret = -ENOSPC; + else + ret = 0; + spin_unlock(&rsv->lock); + return 0; +} + +int btrfs_truncate_free_space_cache(struct btrfs_root *root, + struct btrfs_trans_handle *trans, + struct btrfs_path *path, + struct inode *inode) +{ + loff_t oldsize; + int ret = 0; oldsize = i_size_read(inode); btrfs_i_size_write(inode, 0); @@ -232,9 +234,7 @@ int btrfs_truncate_free_space_cache(struct btrfs_root *root, */ ret = btrfs_truncate_inode_items(trans, root, inode, 0, BTRFS_EXTENT_DATA_KEY); - if (ret) { - trans->block_rsv = rsv; btrfs_abort_transaction(trans, root, ret); return ret; } @@ -242,7 +242,6 @@ int btrfs_truncate_free_space_cache(struct btrfs_root *root, ret = btrfs_update_inode(trans, root, inode); if (ret) btrfs_abort_transaction(trans, root, ret); - trans->block_rsv = rsv; return ret; } diff --git a/fs/btrfs/free-space-cache.h b/fs/btrfs/free-space-cache.h index 4dc17d8809c7..8b7f19f44961 100644 --- a/fs/btrfs/free-space-cache.h +++ b/fs/btrfs/free-space-cache.h @@ -54,6 +54,8 @@ int create_free_space_inode(struct btrfs_root *root, struct btrfs_block_group_cache *block_group, struct btrfs_path *path); +int btrfs_check_trunc_cache_free_space(struct btrfs_root *root, + struct btrfs_block_rsv *rsv); int btrfs_truncate_free_space_cache(struct btrfs_root *root, struct btrfs_trans_handle *trans, struct btrfs_path *path, diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c index 9818d4a3f829..2c66ddbbe670 100644 --- a/fs/btrfs/inode-map.c +++ b/fs/btrfs/inode-map.c @@ -429,11 +429,12 @@ int btrfs_save_ino_cache(struct btrfs_root *root, num_bytes = trans->bytes_reserved; /* * 1 item for inode item insertion if need - * 3 items for inode item update (in the worst case) + * 4 items for inode item update (in the worst case) + * 1 items for slack space if we need do truncation * 1 item for free space object * 3 items for pre-allocation */ - trans->bytes_reserved = btrfs_calc_trans_metadata_size(root, 8); + trans->bytes_reserved = btrfs_calc_trans_metadata_size(root, 10); ret = btrfs_block_rsv_add(root, trans->block_rsv, trans->bytes_reserved, BTRFS_RESERVE_NO_FLUSH); diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 5c5b8bb44ee5..395b82031a42 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -3350,6 +3350,11 @@ static int delete_block_group_cache(struct btrfs_fs_info *fs_info, } truncate: + ret = btrfs_check_trunc_cache_free_space(root, + &fs_info->global_block_rsv); + if (ret) + goto out; + path = btrfs_alloc_path(); if (!path) { ret = -ENOMEM; -- cgit v1.2.3 From b586b32374909863311b7c916c7c0c709141e35a Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Mon, 13 May 2013 13:55:10 +0000 Subject: Btrfs: optimize the error handle of use_block_rsv() cc: Tsutomu Itoh Signed-off-by: Miao Xie Signed-off-by: Josef Bacik --- fs/btrfs/extent-tree.c | 65 ++++++++++++++++++++++---------------------------- 1 file changed, 28 insertions(+), 37 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 162a66bfbffd..5e2c0bf84075 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -6656,48 +6656,39 @@ use_block_rsv(struct btrfs_trans_handle *trans, block_rsv = get_block_rsv(trans, root); - if (block_rsv->size == 0) { - ret = reserve_metadata_bytes(root, block_rsv, blocksize, - BTRFS_RESERVE_NO_FLUSH); - /* - * If we couldn't reserve metadata bytes try and use some from - * the global reserve. - */ - if (ret && block_rsv != global_rsv) { - ret = block_rsv_use_bytes(global_rsv, blocksize); - if (!ret) - return global_rsv; - return ERR_PTR(ret); - } else if (ret) { - return ERR_PTR(ret); - } - return block_rsv; - } + if (unlikely(block_rsv->size == 0)) + goto try_reserve; ret = block_rsv_use_bytes(block_rsv, blocksize); if (!ret) return block_rsv; - if (ret && !block_rsv->failfast) { - if (btrfs_test_opt(root, ENOSPC_DEBUG)) { - static DEFINE_RATELIMIT_STATE(_rs, - DEFAULT_RATELIMIT_INTERVAL * 10, - /*DEFAULT_RATELIMIT_BURST*/ 1); - if (__ratelimit(&_rs)) - WARN(1, KERN_DEBUG - "btrfs: block rsv returned %d\n", ret); - } - ret = reserve_metadata_bytes(root, block_rsv, blocksize, - BTRFS_RESERVE_NO_FLUSH); - if (!ret) { - return block_rsv; - } else if (ret && block_rsv != global_rsv) { - ret = block_rsv_use_bytes(global_rsv, blocksize); - if (!ret) - return global_rsv; - } - } - return ERR_PTR(-ENOSPC); + if (block_rsv->failfast) + return ERR_PTR(ret); + + if (btrfs_test_opt(root, ENOSPC_DEBUG)) { + static DEFINE_RATELIMIT_STATE(_rs, + DEFAULT_RATELIMIT_INTERVAL * 10, + /*DEFAULT_RATELIMIT_BURST*/ 1); + if (__ratelimit(&_rs)) + WARN(1, KERN_DEBUG + "btrfs: block rsv returned %d\n", ret); + } +try_reserve: + ret = reserve_metadata_bytes(root, block_rsv, blocksize, + BTRFS_RESERVE_NO_FLUSH); + if (!ret) + return block_rsv; + /* + * If we couldn't reserve metadata bytes try and use some from + * the global reserve. + */ + if (block_rsv->type != BTRFS_BLOCK_RSV_GLOBAL) { + ret = block_rsv_use_bytes(global_rsv, blocksize); + if (!ret) + return global_rsv; + } + return ERR_PTR(ret); } static void unuse_block_rsv(struct btrfs_fs_info *fs_info, -- cgit v1.2.3 From 5881cfc924c8143dbc3e1f343516fc6527eb8311 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Mon, 13 May 2013 13:55:11 +0000 Subject: Btrfs: don't steal the reserved space from the global reserve if their space type is different If the type of the space we need is different with the global reserve, we can not steal the space from the global reserve, because we can not allocate the space from the free space cache that the global reserve points to. Cc: Tsutomu Itoh Signed-off-by: Miao Xie Signed-off-by: Josef Bacik --- fs/btrfs/extent-tree.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 5e2c0bf84075..54e63b273a64 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -6681,9 +6681,11 @@ try_reserve: return block_rsv; /* * If we couldn't reserve metadata bytes try and use some from - * the global reserve. + * the global reserve if its space type is the same as the global + * reservation. */ - if (block_rsv->type != BTRFS_BLOCK_RSV_GLOBAL) { + if (block_rsv->type != BTRFS_BLOCK_RSV_GLOBAL && + block_rsv->space_info == global_rsv->space_info) { ret = block_rsv_use_bytes(global_rsv, blocksize); if (!ret) return global_rsv; -- cgit v1.2.3 From d88033dbf4c23279b012725876f1e164e09644ff Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Mon, 13 May 2013 13:55:12 +0000 Subject: Btrfs: update the global reserve if it is empty Before applying this patch, we reserved the space for the global reserve by the minimum unit if we found it is empty, it was unreasonable and inefficient, because if the global reserve space was depleted, it implied that the size of the global reserve was too small. In this case, we shoud update the global reserve and fill it. Cc: Tsutomu Itoh Signed-off-by: Miao Xie Signed-off-by: Josef Bacik --- fs/btrfs/extent-tree.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 54e63b273a64..42f5e6196021 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -6653,12 +6653,13 @@ use_block_rsv(struct btrfs_trans_handle *trans, struct btrfs_block_rsv *block_rsv; struct btrfs_block_rsv *global_rsv = &root->fs_info->global_block_rsv; int ret; + bool global_updated = false; block_rsv = get_block_rsv(trans, root); if (unlikely(block_rsv->size == 0)) goto try_reserve; - +again: ret = block_rsv_use_bytes(block_rsv, blocksize); if (!ret) return block_rsv; @@ -6666,6 +6667,12 @@ use_block_rsv(struct btrfs_trans_handle *trans, if (block_rsv->failfast) return ERR_PTR(ret); + if (block_rsv->type == BTRFS_BLOCK_RSV_GLOBAL && !global_updated) { + global_updated = true; + update_global_block_rsv(root->fs_info); + goto again; + } + if (btrfs_test_opt(root, ENOSPC_DEBUG)) { static DEFINE_RATELIMIT_STATE(_rs, DEFAULT_RATELIMIT_INTERVAL * 10, -- cgit v1.2.3 From b9aa55bed1c1a3a329da31884b643c62d57ebb21 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Tue, 14 May 2013 02:12:15 +0000 Subject: Btrfs: return errno if possible when we fail to allocate memory We need to set return value explicitly, otherwise we'll lose the error value. Signed-off-by: Liu Bo Signed-off-by: Josef Bacik --- fs/btrfs/inode.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 1669c3b4be2f..99a9c25d36a6 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -714,8 +714,10 @@ retry: async_extent->ram_size - 1, 0); em = alloc_extent_map(); - if (!em) + if (!em) { + ret = -ENOMEM; goto out_free_reserve; + } em->start = async_extent->start; em->len = async_extent->ram_size; em->orig_start = em->start; @@ -922,8 +924,10 @@ static noinline int __cow_file_range(struct btrfs_trans_handle *trans, } em = alloc_extent_map(); - if (!em) + if (!em) { + ret = -ENOMEM; goto out_reserve; + } em->start = start; em->orig_start = em->start; ram_size = ins.offset; -- cgit v1.2.3 From 89042e5ad23d50449691141334f30d53d6271266 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 15 May 2013 07:48:15 +0000 Subject: Btrfs: fix accessing a freed tree root inode_tree_del() will move the tree root into the dead root list, and then the tree will be destroyed by the cleaner. So if we remove the delayed node which is cached in the inode after inode_tree_del(), we may access a freed tree root. Fix it. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik --- fs/btrfs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 99a9c25d36a6..790eceb48fb0 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4727,6 +4727,7 @@ void btrfs_evict_inode(struct inode *inode) btrfs_end_transaction(trans, root); btrfs_btree_balance_dirty(root); no_delete: + btrfs_remove_delayed_node(inode); clear_inode(inode); return; } @@ -7982,7 +7983,6 @@ void btrfs_destroy_inode(struct inode *inode) inode_tree_del(inode); btrfs_drop_extent_cache(inode, 0, (u64)-1, 0); free: - btrfs_remove_delayed_node(inode); call_rcu(&inode->i_rcu, btrfs_i_callback); } -- cgit v1.2.3 From e1409cef85894f96f4bddc6633d64d1c5275e2a3 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 15 May 2013 07:48:16 +0000 Subject: Btrfs: fix unprotected root node of the subvolume's inode rb-tree The root node of the rb-tree may be changed, so we should get it under the lock. Fix it. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik --- fs/btrfs/inode.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 790eceb48fb0..19eef3e852b0 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4843,14 +4843,13 @@ static void inode_tree_add(struct inode *inode) struct rb_node **p; struct rb_node *parent; u64 ino = btrfs_ino(inode); -again: - p = &root->inode_tree.rb_node; - parent = NULL; if (inode_unhashed(inode)) return; - +again: + parent = NULL; spin_lock(&root->inode_lock); + p = &root->inode_tree.rb_node; while (*p) { parent = *p; entry = rb_entry(parent, struct btrfs_inode, rb_node); -- cgit v1.2.3 From 061594ef171a5ba52b5786688ae766907b0bda2b Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 15 May 2013 07:48:17 +0000 Subject: Btrfs: pause the space balance when remounting to R/O Signed-off-by: Miao Xie Signed-off-by: Josef Bacik --- fs/btrfs/super.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index a4807ced23cc..f0857e092a3c 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -1263,6 +1263,7 @@ static int btrfs_remount(struct super_block *sb, int *flags, char *data) btrfs_dev_replace_suspend_for_unmount(fs_info); btrfs_scrub_cancel(fs_info); + btrfs_pause_balance(fs_info); ret = btrfs_commit_super(root); if (ret) -- cgit v1.2.3 From 314297c2a3fbcbda992507f70cd04cc82084e434 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 15 May 2013 07:48:18 +0000 Subject: Btrfs: remove BUG_ON() in btrfs_read_fs_tree_no_radix() We have checked if ->node is NULL or not, so it is unnecessary to use BUG_ON() to check again. Remove it. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik --- fs/btrfs/disk-io.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index e8b29da30154..9b9f28664b4f 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1513,7 +1513,6 @@ struct btrfs_root *btrfs_read_fs_root_no_radix(struct btrfs_root *tree_root, } root->commit_root = btrfs_root_node(root); - BUG_ON(!root->node); /* -ENOMEM */ out: if (location->objectid != BTRFS_TREE_LOG_OBJECTID) { root->ref_cows = 1; -- cgit v1.2.3 From b216cbfb52c08300c203abf06ea9519d15d10045 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 15 May 2013 07:48:21 +0000 Subject: Btrfs: don't invoke btrfs_invalidate_inodes() in the spin lock context btrfs_invalidate_inodes() may sleep, so we should not invoke it in the spin lock context. Fix it. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik --- fs/btrfs/disk-io.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 9b9f28664b4f..1b03f8393a69 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -3658,8 +3658,11 @@ static void btrfs_destroy_ordered_operations(struct btrfs_transaction *t, ordered_operations); list_del_init(&btrfs_inode->ordered_operations); + spin_unlock(&root->fs_info->ordered_extent_lock); btrfs_invalidate_inodes(btrfs_inode->root); + + spin_lock(&root->fs_info->ordered_extent_lock); } spin_unlock(&root->fs_info->ordered_extent_lock); @@ -3781,8 +3784,11 @@ static void btrfs_destroy_delalloc_inodes(struct btrfs_root *root) list_del_init(&btrfs_inode->delalloc_inodes); clear_bit(BTRFS_INODE_IN_DELALLOC_LIST, &btrfs_inode->runtime_flags); + spin_unlock(&root->fs_info->delalloc_lock); btrfs_invalidate_inodes(btrfs_inode->root); + + spin_lock(&root->fs_info->delalloc_lock); } spin_unlock(&root->fs_info->delalloc_lock); -- cgit v1.2.3 From 17a5adccf3fd01added91f3bf9aa7ee9aa28843b Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Wed, 15 May 2013 11:38:55 -0400 Subject: btrfs: do away with non-whole_page extent I/O end_bio_extent_readpage computes whole_page based on bv_offset and bv_len, without taking into account that blk_update_request may modify them when some of the blocks to be read into a page produce a read error. This would cause the read to unlock only part of the file range associated with the page, which would in turn leave the entire page locked, which would not only keep the process blocked instead of returning -EIO to it, but also prevent any further access to the file. It turns out that btrfs always issues whole-page reads and writes. The special handling of non-whole_page appears to be a mistake or a left-over from a time when this wasn't the case. Indeed, end_bio_extent_writepage distinguished between whole_page and non-whole_page writes but behaved identically in both cases! I've replaced the whole_page computations with warnings, just to be sure that we're not issuing partial page reads or writes. The warnings should probably just go away some time. Signed-off-by: Alexandre Oliva Signed-off-by: Josef Bacik --- fs/btrfs/extent_io.c | 85 +++++++++++++++++++--------------------------------- 1 file changed, 30 insertions(+), 55 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 3e6e410002e5..ca4355ddea06 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1947,28 +1947,6 @@ static void check_page_uptodate(struct extent_io_tree *tree, struct page *page) SetPageUptodate(page); } -/* - * helper function to unlock a page if all the extents in the tree - * for that page are unlocked - */ -static void check_page_locked(struct extent_io_tree *tree, struct page *page) -{ - u64 start = page_offset(page); - u64 end = start + PAGE_CACHE_SIZE - 1; - if (!test_range_bit(tree, start, end, EXTENT_LOCKED, 0, NULL)) - unlock_page(page); -} - -/* - * helper function to end page writeback if all the extents - * in the tree for that page are done with writeback - */ -static void check_page_writeback(struct extent_io_tree *tree, - struct page *page) -{ - end_page_writeback(page); -} - /* * When IO fails, either with EIO or csum verification fails, we * try other mirrors that might have a good copy of the data. This @@ -2398,19 +2376,24 @@ static void end_bio_extent_writepage(struct bio *bio, int err) struct extent_io_tree *tree; u64 start; u64 end; - int whole_page; do { struct page *page = bvec->bv_page; tree = &BTRFS_I(page->mapping->host)->io_tree; - start = page_offset(page) + bvec->bv_offset; - end = start + bvec->bv_len - 1; + /* We always issue full-page reads, but if some block + * in a page fails to read, blk_update_request() will + * advance bv_offset and adjust bv_len to compensate. + * Print a warning for nonzero offsets, and an error + * if they don't add up to a full page. */ + if (bvec->bv_offset || bvec->bv_len != PAGE_CACHE_SIZE) + printk("%s page write in btrfs with offset %u and length %u\n", + bvec->bv_offset + bvec->bv_len != PAGE_CACHE_SIZE + ? KERN_ERR "partial" : KERN_INFO "incomplete", + bvec->bv_offset, bvec->bv_len); - if (bvec->bv_offset == 0 && bvec->bv_len == PAGE_CACHE_SIZE) - whole_page = 1; - else - whole_page = 0; + start = page_offset(page); + end = start + bvec->bv_offset + bvec->bv_len - 1; if (--bvec >= bio->bi_io_vec) prefetchw(&bvec->bv_page->flags); @@ -2418,10 +2401,7 @@ static void end_bio_extent_writepage(struct bio *bio, int err) if (end_extent_writepage(page, err, start, end)) continue; - if (whole_page) - end_page_writeback(page); - else - check_page_writeback(tree, page); + end_page_writeback(page); } while (bvec >= bio->bi_io_vec); bio_put(bio); @@ -2446,7 +2426,6 @@ static void end_bio_extent_readpage(struct bio *bio, int err) struct extent_io_tree *tree; u64 start; u64 end; - int whole_page; int mirror; int ret; @@ -2463,13 +2442,19 @@ static void end_bio_extent_readpage(struct bio *bio, int err) (long int)bio->bi_bdev); tree = &BTRFS_I(page->mapping->host)->io_tree; - start = page_offset(page) + bvec->bv_offset; - end = start + bvec->bv_len - 1; + /* We always issue full-page reads, but if some block + * in a page fails to read, blk_update_request() will + * advance bv_offset and adjust bv_len to compensate. + * Print a warning for nonzero offsets, and an error + * if they don't add up to a full page. */ + if (bvec->bv_offset || bvec->bv_len != PAGE_CACHE_SIZE) + printk("%s page read in btrfs with offset %u and length %u\n", + bvec->bv_offset + bvec->bv_len != PAGE_CACHE_SIZE + ? KERN_ERR "partial" : KERN_INFO "incomplete", + bvec->bv_offset, bvec->bv_len); - if (bvec->bv_offset == 0 && bvec->bv_len == PAGE_CACHE_SIZE) - whole_page = 1; - else - whole_page = 0; + start = page_offset(page); + end = start + bvec->bv_offset + bvec->bv_len - 1; if (++bvec <= bvec_end) prefetchw(&bvec->bv_page->flags); @@ -2528,23 +2513,13 @@ static void end_bio_extent_readpage(struct bio *bio, int err) } unlock_extent_cached(tree, start, end, &cached, GFP_ATOMIC); - if (whole_page) { - if (uptodate) { - SetPageUptodate(page); - } else { - ClearPageUptodate(page); - SetPageError(page); - } - unlock_page(page); + if (uptodate) { + SetPageUptodate(page); } else { - if (uptodate) { - check_page_uptodate(tree, page); - } else { - ClearPageUptodate(page); - SetPageError(page); - } - check_page_locked(tree, page); + ClearPageUptodate(page); + SetPageError(page); } + unlock_page(page); } while (bvec <= bvec_end); bio_put(bio); -- cgit v1.2.3 From 3a6cad9009c85e29e83aafc8ac00b1dd5067fc5f Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Thu, 16 May 2013 14:48:19 +0000 Subject: Btrfs: explicitly use global_block_rsv for quota_tree The quota_tree was set up to use the empty_block_rsv before which would be problematic when the filesystem is filled up and ENOSPC happens during internal operations while the quota tree is updated and COWed (when the btrfs_qgroup_info_item items) are written. In fact, use_block_rsv() which is used in btrfs_cow_block() falls back to the global_block_rsv in this case. But just in order to make it more clear what is happening, change it to explicitly use the global_block_rsv. Signed-off-by: Stefan Behrens Signed-off-by: Josef Bacik --- fs/btrfs/extent-tree.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 42f5e6196021..df472ab1b5ac 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4564,6 +4564,8 @@ static void init_global_block_rsv(struct btrfs_fs_info *fs_info) fs_info->csum_root->block_rsv = &fs_info->global_block_rsv; fs_info->dev_root->block_rsv = &fs_info->global_block_rsv; fs_info->tree_root->block_rsv = &fs_info->global_block_rsv; + if (fs_info->quota_root) + fs_info->quota_root->block_rsv = &fs_info->global_block_rsv; fs_info->chunk_root->block_rsv = &fs_info->chunk_block_rsv; update_global_block_rsv(fs_info); -- cgit v1.2.3 From 655b09fe540b73edeaabfb4c2d700be51a1f8bce Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 17 May 2013 14:06:51 -0400 Subject: Btrfs: make sure roots are assigned before freeing their nodes If we fail to load the chunk tree we'll call free_root_pointers, except we may not have assigned the roots for the dev_root/extent_root/csum_root yet, so we could NULL pointer deref at this point. Just add checks to make sure these roots are set to keep us from panicing. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/disk-io.c | 39 +++++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 18 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 1b03f8393a69..4bdb0528688a 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1987,30 +1987,33 @@ static void free_root_pointers(struct btrfs_fs_info *info, int chunk_root) { free_extent_buffer(info->tree_root->node); free_extent_buffer(info->tree_root->commit_root); - free_extent_buffer(info->dev_root->node); - free_extent_buffer(info->dev_root->commit_root); - free_extent_buffer(info->extent_root->node); - free_extent_buffer(info->extent_root->commit_root); - free_extent_buffer(info->csum_root->node); - free_extent_buffer(info->csum_root->commit_root); - if (info->quota_root) { - free_extent_buffer(info->quota_root->node); - free_extent_buffer(info->quota_root->commit_root); - } - info->tree_root->node = NULL; info->tree_root->commit_root = NULL; - info->dev_root->node = NULL; - info->dev_root->commit_root = NULL; - info->extent_root->node = NULL; - info->extent_root->commit_root = NULL; - info->csum_root->node = NULL; - info->csum_root->commit_root = NULL; + + if (info->dev_root) { + free_extent_buffer(info->dev_root->node); + free_extent_buffer(info->dev_root->commit_root); + info->dev_root->node = NULL; + info->dev_root->commit_root = NULL; + } + if (info->extent_root) { + free_extent_buffer(info->extent_root->node); + free_extent_buffer(info->extent_root->commit_root); + info->extent_root->node = NULL; + info->extent_root->commit_root = NULL; + } + if (info->csum_root) { + free_extent_buffer(info->csum_root->node); + free_extent_buffer(info->csum_root->commit_root); + info->csum_root->node = NULL; + info->csum_root->commit_root = NULL; + } if (info->quota_root) { + free_extent_buffer(info->quota_root->node); + free_extent_buffer(info->quota_root->commit_root); info->quota_root->node = NULL; info->quota_root->commit_root = NULL; } - if (chunk_root) { free_extent_buffer(info->chunk_root->node); free_extent_buffer(info->chunk_root->commit_root); -- cgit v1.2.3 From 9be3395bcd4ad4af76476ac38152b4cafa6b6159 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 17 May 2013 18:30:14 -0400 Subject: Btrfs: use a btrfs bioset instead of abusing bio internals Btrfs has been pointer tagging bi_private and using bi_bdev to store the stripe index and mirror number of failed IOs. As bios bubble back up through the call chain, we use these to decide if and how to retry our IOs. They are also used to count IO failures on a per device basis. Recently a bio tracepoint was added lead to crashes because we were abusing bi_bdev. This commit adds a btrfs bioset, and creates explicit fields for the mirror number and stripe index. The plan is to extend this structure for all of the fields currently in struct btrfs_bio, which will mean one less kmalloc in our IO path. Signed-off-by: Chris Mason Reported-by: Tejun Heo --- fs/btrfs/check-integrity.c | 2 +- fs/btrfs/disk-io.c | 2 +- fs/btrfs/extent_io.c | 49 +++++++++++++++++++++++++++++------ fs/btrfs/extent_io.h | 2 ++ fs/btrfs/inode.c | 64 +++++++++++++++++++++++++++++++--------------- fs/btrfs/raid56.c | 2 +- fs/btrfs/scrub.c | 10 ++++---- fs/btrfs/volumes.c | 41 +++++------------------------ fs/btrfs/volumes.h | 20 +++++++++++++++ 9 files changed, 120 insertions(+), 72 deletions(-) diff --git a/fs/btrfs/check-integrity.c b/fs/btrfs/check-integrity.c index 18af6f48781a..1431a6965017 100644 --- a/fs/btrfs/check-integrity.c +++ b/fs/btrfs/check-integrity.c @@ -1700,7 +1700,7 @@ static int btrfsic_read_block(struct btrfsic_state *state, unsigned int j; DECLARE_COMPLETION_ONSTACK(complete); - bio = bio_alloc(GFP_NOFS, num_pages - i); + bio = btrfs_io_bio_alloc(GFP_NOFS, num_pages - i); if (!bio) { printk(KERN_INFO "btrfsic: bio_alloc() for %u pages failed!\n", diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 4e9ebe1f1827..ca0ea9928210 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -3128,7 +3128,7 @@ static int write_dev_flush(struct btrfs_device *device, int wait) * caller */ device->flush_bio = NULL; - bio = bio_alloc(GFP_NOFS, 0); + bio = btrfs_io_bio_alloc(GFP_NOFS, 0); if (!bio) return -ENOMEM; diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index d2ac518f90e4..fe1d6c3424a5 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -23,6 +23,7 @@ static struct kmem_cache *extent_state_cache; static struct kmem_cache *extent_buffer_cache; +static struct bio_set *btrfs_bioset; #ifdef CONFIG_BTRFS_DEBUG static LIST_HEAD(buffers); @@ -125,10 +126,20 @@ int __init extent_io_init(void) SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL); if (!extent_buffer_cache) goto free_state_cache; + + btrfs_bioset = bioset_create(BIO_POOL_SIZE, + offsetof(struct btrfs_io_bio, bio)); + if (!btrfs_bioset) + goto free_buffer_cache; return 0; +free_buffer_cache: + kmem_cache_destroy(extent_buffer_cache); + extent_buffer_cache = NULL; + free_state_cache: kmem_cache_destroy(extent_state_cache); + extent_state_cache = NULL; return -ENOMEM; } @@ -145,6 +156,8 @@ void extent_io_exit(void) kmem_cache_destroy(extent_state_cache); if (extent_buffer_cache) kmem_cache_destroy(extent_buffer_cache); + if (btrfs_bioset) + bioset_free(btrfs_bioset); } void extent_io_tree_init(struct extent_io_tree *tree, @@ -2046,7 +2059,7 @@ int repair_io_failure(struct btrfs_fs_info *fs_info, u64 start, if (btrfs_is_parity_mirror(map_tree, logical, length, mirror_num)) return 0; - bio = bio_alloc(GFP_NOFS, 1); + bio = btrfs_io_bio_alloc(GFP_NOFS, 1); if (!bio) return -EIO; bio->bi_private = &compl; @@ -2336,7 +2349,7 @@ static int bio_readpage_error(struct bio *failed_bio, struct page *page, return -EIO; } - bio = bio_alloc(GFP_NOFS, 1); + bio = btrfs_io_bio_alloc(GFP_NOFS, 1); if (!bio) { free_io_failure(inode, failrec, 0); return -EIO; @@ -2457,10 +2470,11 @@ static void end_bio_extent_readpage(struct bio *bio, int err) struct page *page = bvec->bv_page; struct extent_state *cached = NULL; struct extent_state *state; + struct btrfs_io_bio *io_bio = btrfs_io_bio(bio); pr_debug("end_bio_extent_readpage: bi_sector=%llu, err=%d, " - "mirror=%ld\n", (u64)bio->bi_sector, err, - (long int)bio->bi_bdev); + "mirror=%lu\n", (u64)bio->bi_sector, err, + io_bio->mirror_num); tree = &BTRFS_I(page->mapping->host)->io_tree; start = page_offset(page) + bvec->bv_offset; @@ -2485,7 +2499,7 @@ static void end_bio_extent_readpage(struct bio *bio, int err) } spin_unlock(&tree->lock); - mirror = (int)(unsigned long)bio->bi_bdev; + mirror = io_bio->mirror_num; if (uptodate && tree->ops && tree->ops->readpage_end_io_hook) { ret = tree->ops->readpage_end_io_hook(page, start, end, state, mirror); @@ -2550,17 +2564,23 @@ static void end_bio_extent_readpage(struct bio *bio, int err) bio_put(bio); } +/* + * this allocates from the btrfs_bioset. We're returning a bio right now + * but you can call btrfs_io_bio for the appropriate container_of magic + */ struct bio * btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs, gfp_t gfp_flags) { struct bio *bio; - bio = bio_alloc(gfp_flags, nr_vecs); + bio = bio_alloc_bioset(gfp_flags, nr_vecs, btrfs_bioset); if (bio == NULL && (current->flags & PF_MEMALLOC)) { - while (!bio && (nr_vecs /= 2)) - bio = bio_alloc(gfp_flags, nr_vecs); + while (!bio && (nr_vecs /= 2)) { + bio = bio_alloc_bioset(gfp_flags, + nr_vecs, btrfs_bioset); + } } if (bio) { @@ -2571,6 +2591,19 @@ btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs, return bio; } +struct bio *btrfs_bio_clone(struct bio *bio, gfp_t gfp_mask) +{ + return bio_clone_bioset(bio, gfp_mask, btrfs_bioset); +} + + +/* this also allocates from the btrfs_bioset */ +struct bio *btrfs_io_bio_alloc(gfp_t gfp_mask, unsigned int nr_iovecs) +{ + return bio_alloc_bioset(gfp_mask, nr_iovecs, btrfs_bioset); +} + + static int __must_check submit_one_bio(int rw, struct bio *bio, int mirror_num, unsigned long bio_flags) { diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h index a2c03a175009..41fb81e7ec53 100644 --- a/fs/btrfs/extent_io.h +++ b/fs/btrfs/extent_io.h @@ -336,6 +336,8 @@ int extent_clear_unlock_delalloc(struct inode *inode, struct bio * btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs, gfp_t gfp_flags); +struct bio *btrfs_io_bio_alloc(gfp_t gfp_mask, unsigned int nr_iovecs); +struct bio *btrfs_bio_clone(struct bio *bio, gfp_t gfp_mask); struct btrfs_fs_info; diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 1669c3b4be2f..d59dddfb1f96 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6927,7 +6927,11 @@ struct btrfs_dio_private { /* IO errors */ int errors; + /* orig_bio is our btrfs_io_bio */ struct bio *orig_bio; + + /* dio_bio came from fs/direct-io.c */ + struct bio *dio_bio; }; static void btrfs_endio_direct_read(struct bio *bio, int err) @@ -6937,6 +6941,7 @@ static void btrfs_endio_direct_read(struct bio *bio, int err) struct bio_vec *bvec = bio->bi_io_vec; struct inode *inode = dip->inode; struct btrfs_root *root = BTRFS_I(inode)->root; + struct bio *dio_bio; u64 start; start = dip->logical_offset; @@ -6976,14 +6981,15 @@ failed: unlock_extent(&BTRFS_I(inode)->io_tree, dip->logical_offset, dip->logical_offset + dip->bytes - 1); - bio->bi_private = dip->private; + dio_bio = dip->dio_bio; kfree(dip); /* If we had a csum failure make sure to clear the uptodate flag */ if (err) - clear_bit(BIO_UPTODATE, &bio->bi_flags); - dio_end_io(bio, err); + clear_bit(BIO_UPTODATE, &dio_bio->bi_flags); + dio_end_io(dio_bio, err); + bio_put(bio); } static void btrfs_endio_direct_write(struct bio *bio, int err) @@ -6994,6 +7000,7 @@ static void btrfs_endio_direct_write(struct bio *bio, int err) struct btrfs_ordered_extent *ordered = NULL; u64 ordered_offset = dip->logical_offset; u64 ordered_bytes = dip->bytes; + struct bio *dio_bio; int ret; if (err) @@ -7021,14 +7028,15 @@ out_test: goto again; } out_done: - bio->bi_private = dip->private; + dio_bio = dip->dio_bio; kfree(dip); /* If we had an error make sure to clear the uptodate flag */ if (err) - clear_bit(BIO_UPTODATE, &bio->bi_flags); - dio_end_io(bio, err); + clear_bit(BIO_UPTODATE, &dio_bio->bi_flags); + dio_end_io(dio_bio, err); + bio_put(bio); } static int __btrfs_submit_bio_start_direct_io(struct inode *inode, int rw, @@ -7064,10 +7072,10 @@ static void btrfs_end_dio_bio(struct bio *bio, int err) if (!atomic_dec_and_test(&dip->pending_bios)) goto out; - if (dip->errors) + if (dip->errors) { bio_io_error(dip->orig_bio); - else { - set_bit(BIO_UPTODATE, &dip->orig_bio->bi_flags); + } else { + set_bit(BIO_UPTODATE, &dip->dio_bio->bi_flags); bio_endio(dip->orig_bio, 0); } out: @@ -7242,25 +7250,34 @@ out_err: return 0; } -static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode, - loff_t file_offset) +static void btrfs_submit_direct(int rw, struct bio *dio_bio, + struct inode *inode, loff_t file_offset) { struct btrfs_root *root = BTRFS_I(inode)->root; struct btrfs_dio_private *dip; - struct bio_vec *bvec = bio->bi_io_vec; + struct bio_vec *bvec = dio_bio->bi_io_vec; + struct bio *io_bio; int skip_sum; int write = rw & REQ_WRITE; int ret = 0; skip_sum = BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM; + io_bio = btrfs_bio_clone(dio_bio, GFP_NOFS); + + if (!io_bio) { + ret = -ENOMEM; + goto free_ordered; + } + dip = kmalloc(sizeof(*dip), GFP_NOFS); if (!dip) { ret = -ENOMEM; - goto free_ordered; + goto free_io_bio; } - dip->private = bio->bi_private; + dip->private = dio_bio->bi_private; + io_bio->bi_private = dio_bio->bi_private; dip->inode = inode; dip->logical_offset = file_offset; @@ -7268,22 +7285,27 @@ static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode, do { dip->bytes += bvec->bv_len; bvec++; - } while (bvec <= (bio->bi_io_vec + bio->bi_vcnt - 1)); + } while (bvec <= (dio_bio->bi_io_vec + dio_bio->bi_vcnt - 1)); - dip->disk_bytenr = (u64)bio->bi_sector << 9; - bio->bi_private = dip; + dip->disk_bytenr = (u64)dio_bio->bi_sector << 9; + io_bio->bi_private = dip; dip->errors = 0; - dip->orig_bio = bio; + dip->orig_bio = io_bio; + dip->dio_bio = dio_bio; atomic_set(&dip->pending_bios, 0); if (write) - bio->bi_end_io = btrfs_endio_direct_write; + io_bio->bi_end_io = btrfs_endio_direct_write; else - bio->bi_end_io = btrfs_endio_direct_read; + io_bio->bi_end_io = btrfs_endio_direct_read; ret = btrfs_submit_direct_hook(rw, dip, skip_sum); if (!ret) return; + +free_io_bio: + bio_put(io_bio); + free_ordered: /* * If this is a write, we need to clean up the reserved space and kill @@ -7299,7 +7321,7 @@ free_ordered: btrfs_put_ordered_extent(ordered); btrfs_put_ordered_extent(ordered); } - bio_endio(bio, ret); + bio_endio(dio_bio, ret); } static ssize_t check_direct_IO(struct btrfs_root *root, int rw, struct kiocb *iocb, diff --git a/fs/btrfs/raid56.c b/fs/btrfs/raid56.c index 0740621daf6c..0525e1389f5b 100644 --- a/fs/btrfs/raid56.c +++ b/fs/btrfs/raid56.c @@ -1050,7 +1050,7 @@ static int rbio_add_io_page(struct btrfs_raid_bio *rbio, } /* put a new bio on the list */ - bio = bio_alloc(GFP_NOFS, bio_max_len >> PAGE_SHIFT?:1); + bio = btrfs_io_bio_alloc(GFP_NOFS, bio_max_len >> PAGE_SHIFT?:1); if (!bio) return -ENOMEM; diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index f489e24659a4..79bd479317cb 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -1296,7 +1296,7 @@ static void scrub_recheck_block(struct btrfs_fs_info *fs_info, } WARN_ON(!page->page); - bio = bio_alloc(GFP_NOFS, 1); + bio = btrfs_io_bio_alloc(GFP_NOFS, 1); if (!bio) { page->io_error = 1; sblock->no_io_error_seen = 0; @@ -1431,7 +1431,7 @@ static int scrub_repair_page_from_good_copy(struct scrub_block *sblock_bad, return -EIO; } - bio = bio_alloc(GFP_NOFS, 1); + bio = btrfs_io_bio_alloc(GFP_NOFS, 1); if (!bio) return -EIO; bio->bi_bdev = page_bad->dev->bdev; @@ -1522,7 +1522,7 @@ again: sbio->dev = wr_ctx->tgtdev; bio = sbio->bio; if (!bio) { - bio = bio_alloc(GFP_NOFS, wr_ctx->pages_per_wr_bio); + bio = btrfs_io_bio_alloc(GFP_NOFS, wr_ctx->pages_per_wr_bio); if (!bio) { mutex_unlock(&wr_ctx->wr_lock); return -ENOMEM; @@ -1930,7 +1930,7 @@ again: sbio->dev = spage->dev; bio = sbio->bio; if (!bio) { - bio = bio_alloc(GFP_NOFS, sctx->pages_per_rd_bio); + bio = btrfs_io_bio_alloc(GFP_NOFS, sctx->pages_per_rd_bio); if (!bio) return -ENOMEM; sbio->bio = bio; @@ -3307,7 +3307,7 @@ static int write_page_nocow(struct scrub_ctx *sctx, "btrfs: scrub write_page_nocow(bdev == NULL) is unexpected!\n"); return -EIO; } - bio = bio_alloc(GFP_NOFS, 1); + bio = btrfs_io_bio_alloc(GFP_NOFS, 1); if (!bio) { spin_lock(&sctx->stat_lock); sctx->stat.malloc_errors++; diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index a191bac31d85..317afc7a2af4 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -5019,42 +5019,16 @@ int btrfs_rmap_block(struct btrfs_mapping_tree *map_tree, return 0; } -static void *merge_stripe_index_into_bio_private(void *bi_private, - unsigned int stripe_index) -{ - /* - * with single, dup, RAID0, RAID1 and RAID10, stripe_index is - * at most 1. - * The alternative solution (instead of stealing bits from the - * pointer) would be to allocate an intermediate structure - * that contains the old private pointer plus the stripe_index. - */ - BUG_ON((((uintptr_t)bi_private) & 3) != 0); - BUG_ON(stripe_index > 3); - return (void *)(((uintptr_t)bi_private) | stripe_index); -} - -static struct btrfs_bio *extract_bbio_from_bio_private(void *bi_private) -{ - return (struct btrfs_bio *)(((uintptr_t)bi_private) & ~((uintptr_t)3)); -} - -static unsigned int extract_stripe_index_from_bio_private(void *bi_private) -{ - return (unsigned int)((uintptr_t)bi_private) & 3; -} - static void btrfs_end_bio(struct bio *bio, int err) { - struct btrfs_bio *bbio = extract_bbio_from_bio_private(bio->bi_private); + struct btrfs_bio *bbio = bio->bi_private; int is_orig_bio = 0; if (err) { atomic_inc(&bbio->error); if (err == -EIO || err == -EREMOTEIO) { unsigned int stripe_index = - extract_stripe_index_from_bio_private( - bio->bi_private); + btrfs_io_bio(bio)->stripe_index; struct btrfs_device *dev; BUG_ON(stripe_index >= bbio->num_stripes); @@ -5084,8 +5058,7 @@ static void btrfs_end_bio(struct bio *bio, int err) } bio->bi_private = bbio->private; bio->bi_end_io = bbio->end_io; - bio->bi_bdev = (struct block_device *) - (unsigned long)bbio->mirror_num; + btrfs_io_bio(bio)->mirror_num = bbio->mirror_num; /* only send an error to the higher layers if it is * beyond the tolerance of the btrfs bio */ @@ -5211,8 +5184,7 @@ static void submit_stripe_bio(struct btrfs_root *root, struct btrfs_bio *bbio, struct btrfs_device *dev = bbio->stripes[dev_nr].dev; bio->bi_private = bbio; - bio->bi_private = merge_stripe_index_into_bio_private( - bio->bi_private, (unsigned int)dev_nr); + btrfs_io_bio(bio)->stripe_index = dev_nr; bio->bi_end_io = btrfs_end_bio; bio->bi_sector = physical >> 9; #ifdef DEBUG @@ -5273,8 +5245,7 @@ static void bbio_error(struct btrfs_bio *bbio, struct bio *bio, u64 logical) if (atomic_dec_and_test(&bbio->stripes_pending)) { bio->bi_private = bbio->private; bio->bi_end_io = bbio->end_io; - bio->bi_bdev = (struct block_device *) - (unsigned long)bbio->mirror_num; + btrfs_io_bio(bio)->mirror_num = bbio->mirror_num; bio->bi_sector = logical >> 9; kfree(bbio); bio_endio(bio, -EIO); @@ -5352,7 +5323,7 @@ int btrfs_map_bio(struct btrfs_root *root, int rw, struct bio *bio, } if (dev_nr < total_devs - 1) { - bio = bio_clone(first_bio, GFP_NOFS); + bio = btrfs_bio_clone(first_bio, GFP_NOFS); BUG_ON(!bio); /* -ENOMEM */ } else { bio = first_bio; diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h index 845ccbb0d2e3..f6247e2a47f7 100644 --- a/fs/btrfs/volumes.h +++ b/fs/btrfs/volumes.h @@ -152,6 +152,26 @@ struct btrfs_fs_devices { int rotating; }; +/* + * we need the mirror number and stripe index to be passed around + * the call chain while we are processing end_io (especially errors). + * Really, what we need is a btrfs_bio structure that has this info + * and is properly sized with its stripe array, but we're not there + * quite yet. We have our own btrfs bioset, and all of the bios + * we allocate are actually btrfs_io_bios. We'll cram as much of + * struct btrfs_bio as we can into this over time. + */ +struct btrfs_io_bio { + unsigned long mirror_num; + unsigned long stripe_index; + struct bio bio; +}; + +static inline struct btrfs_io_bio *btrfs_io_bio(struct bio *bio) +{ + return container_of(bio, struct btrfs_io_bio, bio); +} + struct btrfs_bio_stripe { struct btrfs_device *dev; u64 physical; -- cgit v1.2.3 From d1ab2a98fa729d33973a82619732c534a6051f72 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:46 +0200 Subject: drivers/cpufreq: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Viresh Kumar --- drivers/cpufreq/kirkwood-cpufreq.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c index d36ea8dc96eb..b2644af985ec 100644 --- a/drivers/cpufreq/kirkwood-cpufreq.c +++ b/drivers/cpufreq/kirkwood-cpufreq.c @@ -171,10 +171,6 @@ static int kirkwood_cpufreq_probe(struct platform_device *pdev) priv.dev = &pdev->dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Cannot get memory resource\n"); - return -ENODEV; - } priv.base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv.base)) return PTR_ERR(priv.base); -- cgit v1.2.3 From 627ad13a39575e521a53f949fb2cb899e2945f02 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:47 +0200 Subject: drivers/dma: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Stephen Warren --- drivers/dma/tegra20-apb-dma.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c index ce193409ebd3..33f59ecd256e 100644 --- a/drivers/dma/tegra20-apb-dma.c +++ b/drivers/dma/tegra20-apb-dma.c @@ -1273,11 +1273,6 @@ static int tegra_dma_probe(struct platform_device *pdev) platform_set_drvdata(pdev, tdma); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "No mem resource for DMA\n"); - return -EINVAL; - } - tdma->base_addr = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(tdma->base_addr)) return PTR_ERR(tdma->base_addr); -- cgit v1.2.3 From 8cfc2a1fce75d763bf59dd2d9d40add758fe7b46 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:47 +0200 Subject: drivers/gpio: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Stephen Warren --- drivers/gpio/gpio-mvebu.c | 5 ----- drivers/gpio/gpio-tegra.c | 5 ----- 2 files changed, 10 deletions(-) diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index bf69a7eff370..3a4816adc137 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -619,11 +619,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev) * per-CPU registers */ if (soc_variant == MVEBU_GPIO_SOC_VARIANT_ARMADAXP) { res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(&pdev->dev, "Cannot get memory resource\n"); - return -ENODEV; - } - mvchip->percpu_membase = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(mvchip->percpu_membase)) diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index da4cb5b0cb87..9a62672f1bed 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -463,11 +463,6 @@ static int tegra_gpio_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Missing MEM resource\n"); - return -ENODEV; - } - regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(regs)) return PTR_ERR(regs); -- cgit v1.2.3 From 56261c544da785a3da46db4d033242618be50cce Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:47 +0200 Subject: drivers/gpu/drm/exynos: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/gpu/drm/exynos/exynos_hdmi.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index bbfc3840080c..6652597586a1 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -2005,11 +2005,6 @@ static int hdmi_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - DRM_ERROR("failed to find registers\n"); - return -ENOENT; - } - hdata->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hdata->regs)) return PTR_ERR(hdata->regs); -- cgit v1.2.3 From 849d34571fee01dc45dd4dc9cd13d748c86762df Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:47 +0200 Subject: drivers/gpu/host1x/drm: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/gpu/host1x/drm/dc.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/gpu/host1x/drm/dc.c b/drivers/gpu/host1x/drm/dc.c index 1e2060324f02..8c04943f82e3 100644 --- a/drivers/gpu/host1x/drm/dc.c +++ b/drivers/gpu/host1x/drm/dc.c @@ -1128,11 +1128,6 @@ static int tegra_dc_probe(struct platform_device *pdev) return err; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!regs) { - dev_err(&pdev->dev, "failed to get registers\n"); - return -ENXIO; - } - dc->regs = devm_ioremap_resource(&pdev->dev, regs); if (IS_ERR(dc->regs)) return PTR_ERR(dc->regs); -- cgit v1.2.3 From 00d083f928a37199e0fac984845bfd8b3587238e Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:48 +0200 Subject: drivers/i2c/busses: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Stephen Warren Acked-by: Barry Song --- drivers/i2c/busses/i2c-s3c2410.c | 5 ----- drivers/i2c/busses/i2c-sirf.c | 6 ------ drivers/i2c/busses/i2c-tegra.c | 5 ----- 3 files changed, 16 deletions(-) diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 6e8ee92ab553..cab1c91b75a3 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -1082,11 +1082,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) /* map the registers */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "cannot find IO resource\n"); - return -ENOENT; - } - i2c->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(i2c->regs)) diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c index 5a7ad240bd26..a63c7d506836 100644 --- a/drivers/i2c/busses/i2c-sirf.c +++ b/drivers/i2c/busses/i2c-sirf.c @@ -303,12 +303,6 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev) adap->class = I2C_CLASS_HWMON; mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (mem_res == NULL) { - dev_err(&pdev->dev, "Unable to get MEM resource\n"); - err = -EINVAL; - goto out; - } - siic->base = devm_ioremap_resource(&pdev->dev, mem_res); if (IS_ERR(siic->base)) { err = PTR_ERR(siic->base); diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index b60ff90adc39..9aa1b60f7fdd 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -714,11 +714,6 @@ static int tegra_i2c_probe(struct platform_device *pdev) int ret = 0; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "no mem resource\n"); - return -EINVAL; - } - base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) return PTR_ERR(base); -- cgit v1.2.3 From 118811b234ce11cadba00c184b74442b3bff7c26 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:48 +0200 Subject: drivers/memory: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/memory/emif.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c index cadf1cc19aaf..04644e7b42b1 100644 --- a/drivers/memory/emif.c +++ b/drivers/memory/emif.c @@ -1560,12 +1560,6 @@ static int __init_or_module emif_probe(struct platform_device *pdev) platform_set_drvdata(pdev, emif); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(emif->dev, "%s: error getting memory resource\n", - __func__); - goto error; - } - emif->base = devm_ioremap_resource(emif->dev, res); if (IS_ERR(emif->base)) goto error; -- cgit v1.2.3 From 8897b2bfd2af79f8349754d006a700eef126686d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:49 +0200 Subject: drivers/mfd: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/mfd/intel_msic.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/mfd/intel_msic.c b/drivers/mfd/intel_msic.c index 5be3b5e13855..d8d5137f9717 100644 --- a/drivers/mfd/intel_msic.c +++ b/drivers/mfd/intel_msic.c @@ -414,11 +414,6 @@ static int intel_msic_probe(struct platform_device *pdev) * the clients via intel_msic_irq_read(). */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get SRAM iomem resource\n"); - return -ENODEV; - } - msic->irq_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(msic->irq_base)) return PTR_ERR(msic->irq_base); -- cgit v1.2.3 From 26a39bfca6c4eb32066a5982011c975286872b11 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:49 +0200 Subject: drivers/misc: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/misc/atmel-ssc.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c index c09c28f92055..1abd5ad59925 100644 --- a/drivers/misc/atmel-ssc.c +++ b/drivers/misc/atmel-ssc.c @@ -154,11 +154,6 @@ static int ssc_probe(struct platform_device *pdev) ssc->pdata = (struct atmel_ssc_platform_data *)plat_dat; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!regs) { - dev_dbg(&pdev->dev, "no mmio resource defined\n"); - return -ENXIO; - } - ssc->regs = devm_ioremap_resource(&pdev->dev, regs); if (IS_ERR(ssc->regs)) return PTR_ERR(ssc->regs); -- cgit v1.2.3 From e222a6eb77ca9897076761c854c25ffc43ab8949 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:49 +0200 Subject: drivers/mtd/nand: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/mtd/nand/lpc32xx_mlc.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c index a94facb46e5c..fd1df5e13ae4 100644 --- a/drivers/mtd/nand/lpc32xx_mlc.c +++ b/drivers/mtd/nand/lpc32xx_mlc.c @@ -672,11 +672,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) } rc = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (rc == NULL) { - dev_err(&pdev->dev, "No memory resource found for device!\r\n"); - return -ENXIO; - } - host->io_base = devm_ioremap_resource(&pdev->dev, rc); if (IS_ERR(host->io_base)) return PTR_ERR(host->io_base); -- cgit v1.2.3 From 042c730aa1a134c88c9afccef529694825891640 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:49 +0200 Subject: drivers/net/ethernet/renesas: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/net/ethernet/renesas/sh_eth.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 33dc6f2418f2..42e9dd05c936 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2745,11 +2745,6 @@ static int sh_eth_drv_probe(struct platform_device *pdev) if (mdp->cd->tsu) { struct resource *rtsu; rtsu = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!rtsu) { - dev_err(&pdev->dev, "Not found TSU resource\n"); - ret = -ENODEV; - goto out_release; - } mdp->tsu_addr = devm_ioremap_resource(&pdev->dev, rtsu); if (IS_ERR(mdp->tsu_addr)) { ret = PTR_ERR(mdp->tsu_addr); -- cgit v1.2.3 From 0497a59450a70fcecffc288f9d864d6c778746ee Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:50 +0200 Subject: drivers/pinctrl: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/pinctrl/pinctrl-coh901.c | 5 ----- drivers/pinctrl/pinctrl-exynos5440.c | 5 ----- drivers/pinctrl/pinctrl-samsung.c | 5 ----- drivers/pinctrl/pinctrl-xway.c | 4 ---- 4 files changed, 19 deletions(-) diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c index edde3acc4186..a67af419f531 100644 --- a/drivers/pinctrl/pinctrl-coh901.c +++ b/drivers/pinctrl/pinctrl-coh901.c @@ -713,11 +713,6 @@ static int __init u300_gpio_probe(struct platform_device *pdev) gpio->dev = &pdev->dev; memres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!memres) { - dev_err(gpio->dev, "could not get GPIO memory resource\n"); - return -ENODEV; - } - gpio->base = devm_ioremap_resource(&pdev->dev, memres); if (IS_ERR(gpio->base)) return PTR_ERR(gpio->base); diff --git a/drivers/pinctrl/pinctrl-exynos5440.c b/drivers/pinctrl/pinctrl-exynos5440.c index 6038503ed929..32a48f44f574 100644 --- a/drivers/pinctrl/pinctrl-exynos5440.c +++ b/drivers/pinctrl/pinctrl-exynos5440.c @@ -1000,11 +1000,6 @@ static int exynos5440_pinctrl_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "cannot find IO resource\n"); - return -ENOENT; - } - priv->reg_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv->reg_base)) return PTR_ERR(priv->reg_base); diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 976366899f68..055d0162098b 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -932,11 +932,6 @@ static int samsung_pinctrl_probe(struct platform_device *pdev) drvdata->dev = dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "cannot find IO resource\n"); - return -ENOENT; - } - drvdata->virt_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(drvdata->virt_base)) return PTR_ERR(drvdata->virt_base); diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c index f2977cff8366..e92132c76a6b 100644 --- a/drivers/pinctrl/pinctrl-xway.c +++ b/drivers/pinctrl/pinctrl-xway.c @@ -716,10 +716,6 @@ static int pinmux_xway_probe(struct platform_device *pdev) /* get and remap our register range */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Failed to get resource\n"); - return -ENOENT; - } xway_info.membase[0] = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(xway_info.membase[0])) return PTR_ERR(xway_info.membase[0]); -- cgit v1.2.3 From 362e9cd2f54e3c72a37ff8e3319366554e48c555 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:50 +0200 Subject: drivers/pwm: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Stephen Warren --- drivers/pwm/pwm-imx.c | 5 ----- drivers/pwm/pwm-puv3.c | 5 ----- drivers/pwm/pwm-pxa.c | 5 ----- drivers/pwm/pwm-tegra.c | 5 ----- drivers/pwm/pwm-tiecap.c | 5 ----- drivers/pwm/pwm-tiehrpwm.c | 5 ----- drivers/pwm/pwm-tipwmss.c | 5 ----- drivers/pwm/pwm-vt8500.c | 5 ----- 8 files changed, 40 deletions(-) diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c index ec287989eafc..c938bae18812 100644 --- a/drivers/pwm/pwm-imx.c +++ b/drivers/pwm/pwm-imx.c @@ -265,11 +265,6 @@ static int imx_pwm_probe(struct platform_device *pdev) imx->chip.npwm = 1; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - return -ENODEV; - } - imx->mmio_base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(imx->mmio_base)) return PTR_ERR(imx->mmio_base); diff --git a/drivers/pwm/pwm-puv3.c b/drivers/pwm/pwm-puv3.c index d1eb499fb15d..ed6007b27585 100644 --- a/drivers/pwm/pwm-puv3.c +++ b/drivers/pwm/pwm-puv3.c @@ -117,11 +117,6 @@ static int pwm_probe(struct platform_device *pdev) return PTR_ERR(puv3->clk); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - return -ENODEV; - } - puv3->base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(puv3->base)) return PTR_ERR(puv3->base); diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c index dee6ab552a0a..dc9717551d39 100644 --- a/drivers/pwm/pwm-pxa.c +++ b/drivers/pwm/pwm-pxa.c @@ -147,11 +147,6 @@ static int pwm_probe(struct platform_device *pdev) pwm->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - return -ENODEV; - } - pwm->mmio_base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(pwm->mmio_base)) return PTR_ERR(pwm->mmio_base); diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c index 3d75f4a88f98..a5402933001f 100644 --- a/drivers/pwm/pwm-tegra.c +++ b/drivers/pwm/pwm-tegra.c @@ -181,11 +181,6 @@ static int tegra_pwm_probe(struct platform_device *pdev) pwm->dev = &pdev->dev; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - dev_err(&pdev->dev, "no memory resources defined\n"); - return -ENODEV; - } - pwm->mmio_base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(pwm->mmio_base)) return PTR_ERR(pwm->mmio_base); diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c index 0d65fb2e02c7..72ca42dfa733 100644 --- a/drivers/pwm/pwm-tiecap.c +++ b/drivers/pwm/pwm-tiecap.c @@ -240,11 +240,6 @@ static int ecap_pwm_probe(struct platform_device *pdev) pc->chip.npwm = 1; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - dev_err(&pdev->dev, "no memory resource defined\n"); - return -ENODEV; - } - pc->mmio_base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(pc->mmio_base)) return PTR_ERR(pc->mmio_base); diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c index 6a217596942f..48a485c2e422 100644 --- a/drivers/pwm/pwm-tiehrpwm.c +++ b/drivers/pwm/pwm-tiehrpwm.c @@ -471,11 +471,6 @@ static int ehrpwm_pwm_probe(struct platform_device *pdev) pc->chip.npwm = NUM_PWM_CHANNEL; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - dev_err(&pdev->dev, "no memory resource defined\n"); - return -ENODEV; - } - pc->mmio_base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(pc->mmio_base)) return PTR_ERR(pc->mmio_base); diff --git a/drivers/pwm/pwm-tipwmss.c b/drivers/pwm/pwm-tipwmss.c index c9c3d3a1e0eb..3b119bc2c3c6 100644 --- a/drivers/pwm/pwm-tipwmss.c +++ b/drivers/pwm/pwm-tipwmss.c @@ -70,11 +70,6 @@ static int pwmss_probe(struct platform_device *pdev) mutex_init(&info->pwmss_lock); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - dev_err(&pdev->dev, "no memory resource defined\n"); - return -ENODEV; - } - info->mmio_base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(info->mmio_base)) return PTR_ERR(info->mmio_base); diff --git a/drivers/pwm/pwm-vt8500.c b/drivers/pwm/pwm-vt8500.c index 69effd19afc7..323125abf3f4 100644 --- a/drivers/pwm/pwm-vt8500.c +++ b/drivers/pwm/pwm-vt8500.c @@ -230,11 +230,6 @@ static int vt8500_pwm_probe(struct platform_device *pdev) } r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - return -ENODEV; - } - chip->base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(chip->base)) return PTR_ERR(chip->base); -- cgit v1.2.3 From a177c3ac25df166dbdde03e09ba8cb3065742807 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:50 +0200 Subject: drivers/rtc: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Stephen Warren --- drivers/rtc/rtc-nuc900.c | 5 ----- drivers/rtc/rtc-omap.c | 5 ----- drivers/rtc/rtc-s3c.c | 5 ----- drivers/rtc/rtc-tegra.c | 6 ------ 4 files changed, 21 deletions(-) diff --git a/drivers/rtc/rtc-nuc900.c b/drivers/rtc/rtc-nuc900.c index f5dfb6e5e7d9..d592e2fe43f7 100644 --- a/drivers/rtc/rtc-nuc900.c +++ b/drivers/rtc/rtc-nuc900.c @@ -234,11 +234,6 @@ static int __init nuc900_rtc_probe(struct platform_device *pdev) return -ENOMEM; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "platform_get_resource failed\n"); - return -ENXIO; - } - nuc900_rtc->rtc_reg = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(nuc900_rtc->rtc_reg)) return PTR_ERR(nuc900_rtc->rtc_reg); diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index 4e1bdb832e37..b0ba3fc991ea 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -347,11 +347,6 @@ static int __init omap_rtc_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - pr_debug("%s: RTC resource data missing\n", pdev->name); - return -ENOENT; - } - rtc_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(rtc_base)) return PTR_ERR(rtc_base); diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 14040b22888d..0b495e8b8e66 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -477,11 +477,6 @@ static int s3c_rtc_probe(struct platform_device *pdev) /* get the memory region */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "failed to get memory region resource\n"); - return -ENOENT; - } - s3c_rtc_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(s3c_rtc_base)) return PTR_ERR(s3c_rtc_base); diff --git a/drivers/rtc/rtc-tegra.c b/drivers/rtc/rtc-tegra.c index a34315d25478..76af92ad5a8a 100644 --- a/drivers/rtc/rtc-tegra.c +++ b/drivers/rtc/rtc-tegra.c @@ -322,12 +322,6 @@ static int __init tegra_rtc_probe(struct platform_device *pdev) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, - "Unable to allocate resources for device.\n"); - return -EBUSY; - } - info->rtc_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(info->rtc_base)) return PTR_ERR(info->rtc_base); -- cgit v1.2.3 From 45bae305e495527fb1746c4fc741b53acfc5802c Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:51 +0200 Subject: drivers/spi: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Stephen Warren --- drivers/spi/spi-tegra20-sflash.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/spi/spi-tegra20-sflash.c b/drivers/spi/spi-tegra20-sflash.c index d65c000efe35..09df8e22dba0 100644 --- a/drivers/spi/spi-tegra20-sflash.c +++ b/drivers/spi/spi-tegra20-sflash.c @@ -489,11 +489,6 @@ static int tegra_sflash_probe(struct platform_device *pdev) tegra_sflash_parse_dt(tsd); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - dev_err(&pdev->dev, "No IO memory resource\n"); - ret = -ENODEV; - goto exit_free_master; - } tsd->base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(tsd->base)) { ret = PTR_ERR(tsd->base); -- cgit v1.2.3 From b132566eab75c83a6892bfa835285824f3b40914 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:51 +0200 Subject: drivers/staging/dwc2: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/staging/dwc2/platform.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/staging/dwc2/platform.c b/drivers/staging/dwc2/platform.c index 1f3d581a1078..b610960e93d3 100644 --- a/drivers/staging/dwc2/platform.c +++ b/drivers/staging/dwc2/platform.c @@ -102,11 +102,6 @@ static int dwc2_driver_probe(struct platform_device *dev) } res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&dev->dev, "missing memory base resource\n"); - return -EINVAL; - } - hsotg->regs = devm_ioremap_resource(&dev->dev, res); if (IS_ERR(hsotg->regs)) return PTR_ERR(hsotg->regs); -- cgit v1.2.3 From 4f39b5b5aeeab850ef40654a2ea2e327833aba0c Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:51 +0200 Subject: drivers/staging/nvec: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/staging/nvec/nvec.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c index a88959f9a07a..863b22e51b45 100644 --- a/drivers/staging/nvec/nvec.c +++ b/drivers/staging/nvec/nvec.c @@ -800,11 +800,6 @@ static int tegra_nvec_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "no mem resource?\n"); - return -ENODEV; - } - base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) return PTR_ERR(base); -- cgit v1.2.3 From b948cc6161529d3efda05207225b72421ee005d1 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:51 +0200 Subject: drivers/thermal: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/thermal/armada_thermal.c | 10 ---------- drivers/thermal/dove_thermal.c | 4 ---- drivers/thermal/exynos_thermal.c | 5 ----- 3 files changed, 19 deletions(-) diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c index 5b4d75fd7b49..54ffd64ca3f7 100644 --- a/drivers/thermal/armada_thermal.c +++ b/drivers/thermal/armada_thermal.c @@ -169,21 +169,11 @@ static int armada_thermal_probe(struct platform_device *pdev) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Failed to get platform resource\n"); - return -ENODEV; - } - priv->sensor = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv->sensor)) return PTR_ERR(priv->sensor); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(&pdev->dev, "Failed to get platform resource\n"); - return -ENODEV; - } - priv->control = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv->control)) return PTR_ERR(priv->control); diff --git a/drivers/thermal/dove_thermal.c b/drivers/thermal/dove_thermal.c index 4b15a5f270dc..a088d1365ca5 100644 --- a/drivers/thermal/dove_thermal.c +++ b/drivers/thermal/dove_thermal.c @@ -149,10 +149,6 @@ static int dove_thermal_probe(struct platform_device *pdev) return PTR_ERR(priv->sensor); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(&pdev->dev, "Failed to get platform resource\n"); - return -ENODEV; - } priv->control = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv->control)) return PTR_ERR(priv->control); diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c index d20ce9e61403..788b1ddcac6c 100644 --- a/drivers/thermal/exynos_thermal.c +++ b/drivers/thermal/exynos_thermal.c @@ -925,11 +925,6 @@ static int exynos_tmu_probe(struct platform_device *pdev) INIT_WORK(&data->irq_work, exynos_tmu_work); data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!data->mem) { - dev_err(&pdev->dev, "Failed to get platform resource\n"); - return -ENOENT; - } - data->base = devm_ioremap_resource(&pdev->dev, data->mem); if (IS_ERR(data->base)) return PTR_ERR(data->base); -- cgit v1.2.3 From 122af6d0eca8d36b3d1d1df1b552d94db268e157 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:52 +0200 Subject: drivers/usb/chipidea: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Alexander Shishkin --- drivers/usb/chipidea/core.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 450107e5f657..49b098bedf9b 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -370,11 +370,6 @@ static int ci_hdrc_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "missing resource\n"); - return -ENODEV; - } - base = devm_ioremap_resource(dev, res); if (IS_ERR(base)) return PTR_ERR(base); -- cgit v1.2.3 From bd935817db7b7ce71fd1922677fc42fa3edcd4dc Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:52 +0200 Subject: drivers/usb/gadget: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/usb/gadget/bcm63xx_udc.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c index 6e6518264c42..792297798147 100644 --- a/drivers/usb/gadget/bcm63xx_udc.c +++ b/drivers/usb/gadget/bcm63xx_udc.c @@ -2334,21 +2334,11 @@ static int bcm63xx_udc_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "error finding USBD resource\n"); - return -ENXIO; - } - udc->usbd_regs = devm_ioremap_resource(dev, res); if (IS_ERR(udc->usbd_regs)) return PTR_ERR(udc->usbd_regs); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(dev, "error finding IUDMA resource\n"); - return -ENXIO; - } - udc->iudma_regs = devm_ioremap_resource(dev, res); if (IS_ERR(udc->iudma_regs)) return PTR_ERR(udc->iudma_regs); -- cgit v1.2.3 From bb522812a1a620aa044448fcc8ea9baf0559be46 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:52 +0200 Subject: drivers/usb/host: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Alan Stern --- drivers/usb/host/ohci-nxp.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index f4988fbe78e7..f303cb04c2dd 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -300,12 +300,6 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Failed to get MEM resource\n"); - ret = -ENOMEM; - goto out8; - } - hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { ret = PTR_ERR(hcd->regs); -- cgit v1.2.3 From 9c5fdd38276973c8c65394220e5e740be561cf92 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:53 +0200 Subject: drivers/usb/phy: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/usb/phy/phy-mv-u3d-usb.c | 5 ----- drivers/usb/phy/phy-mxs-usb.c | 5 ----- drivers/usb/phy/phy-samsung-usb2.c | 5 ----- drivers/usb/phy/phy-samsung-usb3.c | 5 ----- 4 files changed, 20 deletions(-) diff --git a/drivers/usb/phy/phy-mv-u3d-usb.c b/drivers/usb/phy/phy-mv-u3d-usb.c index f7838a43347c..1568ea63e338 100644 --- a/drivers/usb/phy/phy-mv-u3d-usb.c +++ b/drivers/usb/phy/phy-mv-u3d-usb.c @@ -278,11 +278,6 @@ static int mv_u3d_phy_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "missing mem resource\n"); - return -ENODEV; - } - phy_base = devm_ioremap_resource(dev, res); if (IS_ERR(phy_base)) return PTR_ERR(phy_base); diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 9d4381e64d51..eb25dd2a1429 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -130,11 +130,6 @@ static int mxs_phy_probe(struct platform_device *pdev) int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "can't get device resources\n"); - return -ENOENT; - } - base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) return PTR_ERR(base); diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c index 45ffe036dacc..9d5e273abcc7 100644 --- a/drivers/usb/phy/phy-samsung-usb2.c +++ b/drivers/usb/phy/phy-samsung-usb2.c @@ -363,11 +363,6 @@ static int samsung_usb2phy_probe(struct platform_device *pdev) int ret; phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!phy_mem) { - dev_err(dev, "%s: missing mem resource\n", __func__); - return -ENODEV; - } - phy_base = devm_ioremap_resource(dev, phy_mem); if (IS_ERR(phy_base)) return PTR_ERR(phy_base); diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c index 133f3d0c554f..5a9efcbcb532 100644 --- a/drivers/usb/phy/phy-samsung-usb3.c +++ b/drivers/usb/phy/phy-samsung-usb3.c @@ -239,11 +239,6 @@ static int samsung_usb3phy_probe(struct platform_device *pdev) int ret; phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!phy_mem) { - dev_err(dev, "%s: missing mem resource\n", __func__); - return -ENODEV; - } - phy_base = devm_ioremap_resource(dev, phy_mem); if (IS_ERR(phy_base)) return PTR_ERR(phy_base); -- cgit v1.2.3 From dc83d05b10046686882e4f07a3242aa7319de49b Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:53 +0200 Subject: drivers/video/omap2: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/video/omap2/vrfb.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c index 5261229c79af..f346b02eee1d 100644 --- a/drivers/video/omap2/vrfb.c +++ b/drivers/video/omap2/vrfb.c @@ -353,11 +353,6 @@ static int __init vrfb_probe(struct platform_device *pdev) /* first resource is the register res, the rest are vrfb contexts */ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(&pdev->dev, "can't get vrfb base address\n"); - return -EINVAL; - } - vrfb_base = devm_ioremap_resource(&pdev->dev, mem); if (IS_ERR(vrfb_base)) return PTR_ERR(vrfb_base); -- cgit v1.2.3 From ffc0775be17784e258836919fd3ec9c02bb6dc25 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:53 +0200 Subject: drivers/video/omap2/dss: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/video/omap2/dss/hdmi.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index 17f4d55c621c..a109934c0478 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -1065,10 +1065,6 @@ static int omapdss_hdmihw_probe(struct platform_device *pdev) mutex_init(&hdmi.ip_data.lock); res = platform_get_resource(hdmi.pdev, IORESOURCE_MEM, 0); - if (!res) { - DSSERR("can't get IORESOURCE_MEM HDMI\n"); - return -EINVAL; - } /* Base address taken from platform */ hdmi.ip_data.base_wp = devm_ioremap_resource(&pdev->dev, res); -- cgit v1.2.3 From ac066a5c1c012e2a1375ff105b98b3b22fc9e7d2 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:53 +0200 Subject: drivers/w1/masters: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/w1/masters/omap_hdq.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c index db2390aed387..6e94d8dd3d00 100644 --- a/drivers/w1/masters/omap_hdq.c +++ b/drivers/w1/masters/omap_hdq.c @@ -555,11 +555,6 @@ static int omap_hdq_probe(struct platform_device *pdev) platform_set_drvdata(pdev, hdq_data); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_dbg(&pdev->dev, "unable to get resource\n"); - return -ENXIO; - } - hdq_data->hdq_base = devm_ioremap_resource(dev, res); if (IS_ERR(hdq_data->hdq_base)) return PTR_ERR(hdq_data->hdq_base); -- cgit v1.2.3 From 937192a7cf9f09e3ea02ef723855674f97e826bc Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:54 +0200 Subject: drivers/watchdog: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- drivers/watchdog/ath79_wdt.c | 5 ----- drivers/watchdog/davinci_wdt.c | 5 ----- drivers/watchdog/imx2_wdt.c | 5 ----- 3 files changed, 15 deletions(-) diff --git a/drivers/watchdog/ath79_wdt.c b/drivers/watchdog/ath79_wdt.c index d184c48a0482..37cb09b27b63 100644 --- a/drivers/watchdog/ath79_wdt.c +++ b/drivers/watchdog/ath79_wdt.c @@ -248,11 +248,6 @@ static int ath79_wdt_probe(struct platform_device *pdev) return -EBUSY; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "no memory resource found\n"); - return -EINVAL; - } - wdt_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(wdt_base)) return PTR_ERR(wdt_base); diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c index 100d4fbfde2a..bead7740c86a 100644 --- a/drivers/watchdog/davinci_wdt.c +++ b/drivers/watchdog/davinci_wdt.c @@ -217,11 +217,6 @@ static int davinci_wdt_probe(struct platform_device *pdev) dev_info(dev, "heartbeat %d sec\n", heartbeat); wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (wdt_mem == NULL) { - dev_err(dev, "failed to get memory region resource\n"); - return -ENOENT; - } - wdt_base = devm_ioremap_resource(dev, wdt_mem); if (IS_ERR(wdt_base)) return PTR_ERR(wdt_base); diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c index ff908823688c..62946c2cb4f8 100644 --- a/drivers/watchdog/imx2_wdt.c +++ b/drivers/watchdog/imx2_wdt.c @@ -257,11 +257,6 @@ static int __init imx2_wdt_probe(struct platform_device *pdev) struct resource *res; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "can't get device resources\n"); - return -ENODEV; - } - imx2_wdt.base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(imx2_wdt.base)) return PTR_ERR(imx2_wdt.base); -- cgit v1.2.3 From d7fc0dde96248c0d90e02bc95dc5c003ece84982 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:55 +0200 Subject: arch/arm/mach-tegra: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: Stephen Warren --- arch/arm/mach-tegra/tegra2_emc.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c index 9e8bdfa2b369..31e69a019bdd 100644 --- a/arch/arm/mach-tegra/tegra2_emc.c +++ b/arch/arm/mach-tegra/tegra2_emc.c @@ -307,11 +307,6 @@ static int tegra_emc_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "missing register base\n"); - return -ENOMEM; - } - emc_regbase = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(emc_regbase)) return PTR_ERR(emc_regbase); -- cgit v1.2.3 From c818b58e63f1d9fe1c070f0e578ef5168de35312 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:55 +0200 Subject: arch/arm/plat-samsung: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- arch/arm/plat-samsung/adc.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index ca07cb1b155a..79690f2f6d3f 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -381,11 +381,6 @@ static int s3c_adc_probe(struct platform_device *pdev) } regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!regs) { - dev_err(dev, "failed to find registers\n"); - return -ENXIO; - } - adc->regs = devm_ioremap_resource(dev, regs); if (IS_ERR(adc->regs)) return PTR_ERR(adc->regs); -- cgit v1.2.3 From 02fdb79f3623de6281dae9ae26ff5a8e1aa58970 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:56 +0200 Subject: arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang Acked-by: John Crispin --- arch/mips/lantiq/xway/gptu.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/mips/lantiq/xway/gptu.c b/arch/mips/lantiq/xway/gptu.c index 9861c8669fab..d6a79b8a6016 100644 --- a/arch/mips/lantiq/xway/gptu.c +++ b/arch/mips/lantiq/xway/gptu.c @@ -144,10 +144,6 @@ static int gptu_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Failed to get resource\n"); - return -ENOMEM; - } /* remap gptu register range */ gptu_membase = devm_ioremap_resource(&pdev->dev, res); -- cgit v1.2.3 From 5f68d04d39eeb16b9ea7639f62c4ae59163b4813 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:57 +0200 Subject: sound/soc/fsl: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- sound/soc/fsl/imx-ssi.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/sound/soc/fsl/imx-ssi.c b/sound/soc/fsl/imx-ssi.c index 902fab02b851..c6fa03e2114a 100644 --- a/sound/soc/fsl/imx-ssi.c +++ b/sound/soc/fsl/imx-ssi.c @@ -540,11 +540,6 @@ static int imx_ssi_probe(struct platform_device *pdev) clk_prepare_enable(ssi->clk); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENODEV; - goto failed_get_resource; - } - ssi->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(ssi->base)) { ret = PTR_ERR(ssi->base); @@ -633,7 +628,6 @@ failed_pdev_fiq_alloc: snd_soc_unregister_component(&pdev->dev); failed_register: release_mem_region(res->start, resource_size(res)); -failed_get_resource: clk_disable_unprepare(ssi->clk); failed_clk: -- cgit v1.2.3 From 12716cd44da7e6c935e2fb1783417ca31fbbaa97 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 12 May 2013 15:19:57 +0200 Subject: sound/soc/kirkwood: don't check resource with devm_ioremap_resource devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang --- sound/soc/kirkwood/kirkwood-i2s.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c index befe68f59285..4c9dad3263c5 100644 --- a/sound/soc/kirkwood/kirkwood-i2s.c +++ b/sound/soc/kirkwood/kirkwood-i2s.c @@ -471,11 +471,6 @@ static int kirkwood_i2s_dev_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, priv); mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(&pdev->dev, "platform_get_resource failed\n"); - return -ENXIO; - } - priv->io = devm_ioremap_resource(&pdev->dev, mem); if (IS_ERR(priv->io)) return PTR_ERR(priv->io); -- cgit v1.2.3 From 014be2c8eac3381e202f684c1f35ae184a8b152b Mon Sep 17 00:00:00 2001 From: Sridhar Samudrala Date: Fri, 17 May 2013 06:39:07 +0000 Subject: vxlan: Update vxlan fdb 'used' field after each usage Fix some instances where vxlan fdb 'used' field is not updated after the entry is used. v2: rename vxlan_find_mac() as __vxlan_find_mac() and create a new vxlan_find_mac() that also updates ->used field. Signed-off-by: Sridhar Samudrala Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index ba81f3c39a83..3b1d2ee7156b 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -301,7 +301,7 @@ static inline struct hlist_head *vxlan_fdb_head(struct vxlan_dev *vxlan, } /* Look up Ethernet address in forwarding table */ -static struct vxlan_fdb *vxlan_find_mac(struct vxlan_dev *vxlan, +static struct vxlan_fdb *__vxlan_find_mac(struct vxlan_dev *vxlan, const u8 *mac) { @@ -316,6 +316,18 @@ static struct vxlan_fdb *vxlan_find_mac(struct vxlan_dev *vxlan, return NULL; } +static struct vxlan_fdb *vxlan_find_mac(struct vxlan_dev *vxlan, + const u8 *mac) +{ + struct vxlan_fdb *f; + + f = __vxlan_find_mac(vxlan, mac); + if (f) + f->used = jiffies; + + return f; +} + /* Add/update destinations for multicast */ static int vxlan_fdb_append(struct vxlan_fdb *f, __be32 ip, __be16 port, __u32 vni, __u32 ifindex) @@ -353,7 +365,7 @@ static int vxlan_fdb_create(struct vxlan_dev *vxlan, struct vxlan_fdb *f; int notify = 0; - f = vxlan_find_mac(vxlan, mac); + f = __vxlan_find_mac(vxlan, mac); if (f) { if (flags & NLM_F_EXCL) { netdev_dbg(vxlan->dev, @@ -563,7 +575,6 @@ static void vxlan_snoop(struct net_device *dev, f = vxlan_find_mac(vxlan, src_mac); if (likely(f)) { - f->used = jiffies; if (likely(f->remote.remote_ip == src_ip)) return; -- cgit v1.2.3 From 284041ef21fdf2e0d216ab6b787bc9072b4eb58a Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 17 May 2013 04:53:13 +0000 Subject: ipv6: fix possible crashes in ip6_cork_release() commit 0178b695fd6b4 ("ipv6: Copy cork options in ip6_append_data") added some code duplication and bad error recovery, leading to potential crash in ip6_cork_release() as kfree() could be called with garbage. use kzalloc() to make sure this wont happen. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Cc: Herbert Xu Cc: Hideaki YOSHIFUJI Cc: Neal Cardwell --- net/ipv6/ip6_output.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index d2eedf192330..dae1949019d7 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1147,7 +1147,7 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to, if (WARN_ON(np->cork.opt)) return -EINVAL; - np->cork.opt = kmalloc(opt->tot_len, sk->sk_allocation); + np->cork.opt = kzalloc(opt->tot_len, sk->sk_allocation); if (unlikely(np->cork.opt == NULL)) return -ENOBUFS; -- cgit v1.2.3 From 8b9232141bf40788cce31f893c13f344ec31ee66 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 18 May 2013 17:02:59 +0200 Subject: MIPS: Rewrite pfn_valid to work in modules, too. This fixes: MODPOST 393 modules ERROR: "min_low_pfn" [arch/mips/kvm/kvm.ko] undefined! make[3]: *** [__modpost] Error 1 It would have been possible to just export min_low_pfn but in the end pfn_valid should return 1 for any pfn argument for which a struct page exists so using min_low_pfn was wrong anyway. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/page.h | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index ec1ca537fbc1..f59552fae917 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -171,14 +171,13 @@ typedef struct { unsigned long pgprot; } pgprot_t; #ifdef CONFIG_FLATMEM -#define pfn_valid(pfn) \ -({ \ - unsigned long __pfn = (pfn); \ - /* avoid include hell */ \ - extern unsigned long min_low_pfn; \ - \ - __pfn >= min_low_pfn && __pfn < max_mapnr; \ -}) +static inline int pfn_valid(unsigned long pfn) +{ + /* avoid include hell */ + extern unsigned long max_mapnr; + + return pfn >= ARCH_PFN_OFFSET && pfn < max_mapnr; +} #elif defined(CONFIG_SPARSEMEM) -- cgit v1.2.3 From c93a64fe6ca6a03fbe076f705e5f5d30d1bded79 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 15 May 2013 19:02:24 +0200 Subject: KVM: take over co-maintainership from Marcelo, fix MAINTAINERS entry As announced last week by Marcelo Tosatti, I will be co-maintaining KVM together with Gleb. Cc: Marcelo Tosatti Cc: Gleb Natapov Cc: kvm@vger.kernel.org Acked-by: Marcelo Tosatti Signed-off-by: Paolo Bonzini Signed-off-by: Gleb Natapov --- MAINTAINERS | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 3d7782b9f90d..790e5a9e3528 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4641,12 +4641,13 @@ F: include/linux/sunrpc/ F: include/uapi/linux/sunrpc/ KERNEL VIRTUAL MACHINE (KVM) -M: Marcelo Tosatti M: Gleb Natapov +M: Paolo Bonzini L: kvm@vger.kernel.org -W: http://kvm.qumranet.com +W: http://linux-kvm.org S: Supported -F: Documentation/*/kvm.txt +F: Documentation/*/kvm*.txt +F: Documentation/virtual/kvm/ F: arch/*/kvm/ F: arch/*/include/asm/kvm* F: include/linux/kvm* -- cgit v1.2.3 From 4e2284d23b5124df3a039fce25093bef619731ff Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 19 May 2013 16:57:30 +0200 Subject: hwmon: (tmp401) Drop redundant safety on cache lifetime time_after (as opposed to time_after_equal) already ensures that the cache lifetime is at least as much as requested. There is no point in manually adding another jiffy to that value, and this can confuse the reader into wrong interpretation. Signed-off-by: Jean Delvare Cc: Imre Deak Cc: Guenter Roeck Signed-off-by: Guenter Roeck --- drivers/hwmon/tmp401.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c index a478454f690f..dfe6d9527efb 100644 --- a/drivers/hwmon/tmp401.c +++ b/drivers/hwmon/tmp401.c @@ -240,7 +240,7 @@ static struct tmp401_data *tmp401_update_device(struct device *dev) mutex_lock(&data->update_lock); next_update = data->last_updated + - msecs_to_jiffies(data->update_interval) + 1; + msecs_to_jiffies(data->update_interval); if (time_after(jiffies, next_update) || !data->valid) { if (data->kind != tmp432) { /* -- cgit v1.2.3 From 610bba8b9372597967aefdc8d90661d2ab248802 Mon Sep 17 00:00:00 2001 From: Alasdair G Kergon Date: Sun, 19 May 2013 18:57:50 +0100 Subject: dm thin: fix metadata dev resize detection Fix detection of the need to resize the dm thin metadata device. The code incorrectly tried to extend the metadata device when it didn't need to due to a merging error with patch 24347e9 ("dm thin: detect metadata device resizing"). device-mapper: transaction manager: couldn't open metadata space map device-mapper: thin metadata: tm_open_with_sm failed device-mapper: thin: aborting transaction failed device-mapper: thin: switching pool to failure mode Signed-off-by: Alasdair G Kergon --- drivers/md/dm-thin.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 759cffc45cab..88f2f802d528 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -2188,7 +2188,7 @@ static int maybe_resize_metadata_dev(struct dm_target *ti, bool *need_commit) *need_commit = false; - metadata_dev_size = get_metadata_dev_size(pool->md_dev); + metadata_dev_size = get_metadata_dev_size_in_blocks(pool->md_dev); r = dm_pool_get_metadata_dev_size(pool->pmd, &sb_metadata_dev_size); if (r) { @@ -2197,7 +2197,7 @@ static int maybe_resize_metadata_dev(struct dm_target *ti, bool *need_commit) } if (metadata_dev_size < sb_metadata_dev_size) { - DMERR("metadata device (%llu sectors) too small: expected %llu", + DMERR("metadata device (%llu blocks) too small: expected %llu", metadata_dev_size, sb_metadata_dev_size); return -EINVAL; -- cgit v1.2.3 From c689cbac25b4fce2f3d7de2e4dd6678caeebdcb8 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Fri, 17 May 2013 14:25:03 +0200 Subject: ARM: mvebu: select ARCH_REQUIRE_GPIOLIB for mvebu platform Initially ARCH_REQUIRE_GPIOLIB was part of Thomas Petazzoni series when he introduced the gpiolib support for mvebu: 93a59cf arm: mvebu: use GPIO support now that a driver is available This commit was written to be applied for the ARCH_MVEBU which was located in arch/arm/KConfig and was merged in 3.7. In the same time Rob Herring moved the ARCH_MVEBU block to arch/arm/mach-mvebu/Kconfig with this commit and also merged in 3.7: 387798b ARM: initial multiplatform support Unfortunately the ARCH_REQUIRE_GPIOLIB have been lost during this migration. This was not noticed until the v3.10-rc1, because mvebu as part of ARCH_MULTIPLATFORM was always selected with ARCH_VEXPRESS, and this architect selected ARCH_REQUIRE_GPIOLIB. Since the following commit from Arnd: "883a106 ARM: default machine descriptor for multiplatform", ARCH_VEXPRESS was then no more selected by default with ARCH_MVEBU and it made appeared the lack of ARCH_REQUIRE_GPIOLIB for mvebu. This commit added back the selection of ARCH_REQUIRE_GPIOLIB for ARCH_MVEBU. Signed-off-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index e11acbb0a46d..80a8bcacd9d5 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -15,6 +15,7 @@ config ARCH_MVEBU select MVEBU_CLK_GATING select MVEBU_MBUS select ZONE_DMA if ARM_LPAE + select ARCH_REQUIRE_GPIOLIB if ARCH_MVEBU -- cgit v1.2.3 From 8eed481e6fe2c28c2a579ada0c8ba5cbad45bf2c Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 16 May 2013 17:55:16 +0200 Subject: arm: mvebu: fix the 'ranges' property to handle PCIe Since 82a682676 ('ARM: dts: mvebu: Convert all the mvebu files to use the range property') all the device nodes of Armada 370/XP are under a common 'ranges' property that translates the device register addresses into their absolute address, thanks to the base address of the internal register space. However, beyond just the register areas, there are also PCIe I/O and memory regions, whose addresses should be properly translated. This patch fixes the Armada 370 and XP ranges property to take PCIe into account properly. Signed-off-by: Thomas Petazzoni Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-xp.dtsi | 3 ++- arch/arm/boot/dts/armada-370.dtsi | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 272bbc65fab0..550eb772c30e 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -33,7 +33,8 @@ #size-cells = <1>; compatible = "simple-bus"; interrupt-parent = <&mpic>; - ranges = <0 0 0xd0000000 0x100000>; + ranges = <0 0 0xd0000000 0x0100000 /* internal registers */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>; internal-regs { compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 0c9130b6fb80..a1a870364dd8 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -29,7 +29,8 @@ }; soc { - ranges = <0 0xd0000000 0x100000>; + ranges = <0 0xd0000000 0x0100000 /* internal registers */ + 0xe0000000 0xe0000000 0x8100000 /* PCIe */>; internal-regs { system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; -- cgit v1.2.3 From 6b21e1b77d1a3d58ebfd513264c885695e8a0ba5 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Fri, 17 May 2013 09:08:50 +0000 Subject: netlabel: improve domain mapping validation The net/netlabel/netlabel_domainhash.c:netlbl_domhsh_add() function does not properly validate new domain hash entries resulting in potential problems when an administrator attempts to add an invalid entry. One such problem, as reported by Vlad Halilov, is a kernel BUG (found in netlabel_domainhash.c:netlbl_domhsh_audit_add()) when adding an IPv6 outbound mapping with a CIPSO configuration. This patch corrects this problem by adding the necessary validation code to netlbl_domhsh_add() via the newly created netlbl_domhsh_validate() function. Ideally this patch should also be pushed to the currently active -stable trees. Reported-by: Vlad Halilov Signed-off-by: Paul Moore Signed-off-by: David S. Miller --- net/netlabel/netlabel_domainhash.c | 69 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) diff --git a/net/netlabel/netlabel_domainhash.c b/net/netlabel/netlabel_domainhash.c index d8d424337550..6bb1d42f0fac 100644 --- a/net/netlabel/netlabel_domainhash.c +++ b/net/netlabel/netlabel_domainhash.c @@ -245,6 +245,71 @@ static void netlbl_domhsh_audit_add(struct netlbl_dom_map *entry, } } +/** + * netlbl_domhsh_validate - Validate a new domain mapping entry + * @entry: the entry to validate + * + * This function validates the new domain mapping entry to ensure that it is + * a valid entry. Returns zero on success, negative values on failure. + * + */ +static int netlbl_domhsh_validate(const struct netlbl_dom_map *entry) +{ + struct netlbl_af4list *iter4; + struct netlbl_domaddr4_map *map4; +#if IS_ENABLED(CONFIG_IPV6) + struct netlbl_af6list *iter6; + struct netlbl_domaddr6_map *map6; +#endif /* IPv6 */ + + if (entry == NULL) + return -EINVAL; + + switch (entry->type) { + case NETLBL_NLTYPE_UNLABELED: + if (entry->type_def.cipsov4 != NULL || + entry->type_def.addrsel != NULL) + return -EINVAL; + break; + case NETLBL_NLTYPE_CIPSOV4: + if (entry->type_def.cipsov4 == NULL) + return -EINVAL; + break; + case NETLBL_NLTYPE_ADDRSELECT: + netlbl_af4list_foreach(iter4, &entry->type_def.addrsel->list4) { + map4 = netlbl_domhsh_addr4_entry(iter4); + switch (map4->type) { + case NETLBL_NLTYPE_UNLABELED: + if (map4->type_def.cipsov4 != NULL) + return -EINVAL; + break; + case NETLBL_NLTYPE_CIPSOV4: + if (map4->type_def.cipsov4 == NULL) + return -EINVAL; + break; + default: + return -EINVAL; + } + } +#if IS_ENABLED(CONFIG_IPV6) + netlbl_af6list_foreach(iter6, &entry->type_def.addrsel->list6) { + map6 = netlbl_domhsh_addr6_entry(iter6); + switch (map6->type) { + case NETLBL_NLTYPE_UNLABELED: + break; + default: + return -EINVAL; + } + } +#endif /* IPv6 */ + break; + default: + return -EINVAL; + } + + return 0; +} + /* * Domain Hash Table Functions */ @@ -311,6 +376,10 @@ int netlbl_domhsh_add(struct netlbl_dom_map *entry, struct netlbl_af6list *tmp6; #endif /* IPv6 */ + ret_val = netlbl_domhsh_validate(entry); + if (ret_val != 0) + return ret_val; + /* XXX - we can remove this RCU read lock as the spinlock protects the * entire function, but before we do we need to fixup the * netlbl_af[4,6]list RCU functions to do "the right thing" with -- cgit v1.2.3 From ff0102ee104847023c36357e2b9f133f3f40d211 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 16 May 2013 23:13:04 +0000 Subject: net: irda: using kzalloc() instead of kmalloc() to avoid strncpy() issue. 'discovery->data.info' length is 22, NICKNAME_MAX_LEN is 21, so the strncpy() will always left the last byte of 'discovery->data.info' uninitialized. When 'text' length is longer than 21 (NICKNAME_MAX_LEN), if still left the last byte of 'discovery->data.info' uninitialized, the next strlen() will cause issue. Also 'discovery->data' is 'struct irda_device_info' which defined in "include/uapi/...", it may copy to user mode, so need whole initialized. All together, need use kzalloc() instead of kmalloc() to initialize all members firstly. Signed-off-by: Chen Gang Signed-off-by: David S. Miller --- net/irda/irlap_frame.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/irda/irlap_frame.c b/net/irda/irlap_frame.c index 8c004161a843..9ea0c933b9ff 100644 --- a/net/irda/irlap_frame.c +++ b/net/irda/irlap_frame.c @@ -544,7 +544,7 @@ static void irlap_recv_discovery_xid_cmd(struct irlap_cb *self, /* * We now have some discovery info to deliver! */ - discovery = kmalloc(sizeof(discovery_t), GFP_ATOMIC); + discovery = kzalloc(sizeof(discovery_t), GFP_ATOMIC); if (!discovery) { IRDA_WARNING("%s: unable to malloc!\n", __func__); return; -- cgit v1.2.3 From 35513171eed4d7245e81d926d311e74f3dca06f3 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 15 May 2013 20:18:37 +0530 Subject: ARM: OMAP2+: hwmod: Fix sidle programming in _enable_sysc()/_idle_sysc() _enable_sysc() and _idle_sysc() handle the midle mode programming correctly and program HWMOD_IDLEMODE_SMART or HWMOD_IDLEMODE_SMART_WKUP respectively for supported IPs (The ones which support hardware controlled midle modes) However the same programming logic is missing when it comes to sidle mode programming. Here they seem to just set HWMOD_IDLEMODE_SMART (Again for the ones which support hardware controlled sidle modes) This problem was hidden due to the fact that a call to _enable_wakeup() in those same functions would overwrite the idlemodes and program them correctly (to HWMOD_IDLEMODE_SMART_WKUP in the supported cases) So fix the sidlemode handling correctly in these functions and handle the _enable_wakeup() for SIDLEMODE supported IPs same as the way its handled for MIDLEMODE supported ones. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra Nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 42 ++++++++++++++++++++++++---------------- 1 file changed, 25 insertions(+), 17 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d25a95fe9921..c28552bfeb8d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1356,13 +1356,26 @@ static void _enable_sysc(struct omap_hwmod *oh) clkdm = _get_clkdm(oh); if (sf & SYSC_HAS_SIDLEMODE) { + if (oh->flags & HWMOD_SWSUP_SIDLE) { + idlemode = HWMOD_IDLEMODE_NO; + } else { + if (sf & SYSC_HAS_ENAWAKEUP) + _enable_wakeup(oh, &v); + if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + } + + /* + * This is special handling for some IPs like + * 32k sync timer. Force them to idle! + */ clkdm_act = (clkdm && clkdm->flags & CLKDM_ACTIVE_WITH_MPU); if (clkdm_act && !(oh->class->sysc->idlemodes & (SIDLE_SMART | SIDLE_SMART_WKUP))) idlemode = HWMOD_IDLEMODE_FORCE; - else - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; + _set_slave_idlemode(oh, idlemode, &v); } @@ -1391,10 +1404,6 @@ static void _enable_sysc(struct omap_hwmod *oh) (sf & SYSC_HAS_CLOCKACTIVITY)) _set_clockactivity(oh, oh->class->sysc->clockact, &v); - /* If slave is in SMARTIDLE, also enable wakeup */ - if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); /* @@ -1430,13 +1439,16 @@ static void _idle_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */ - if (oh->flags & HWMOD_SWSUP_SIDLE || - !(oh->class->sysc->idlemodes & - (SIDLE_SMART | SIDLE_SMART_WKUP))) + if (oh->flags & HWMOD_SWSUP_SIDLE) { idlemode = HWMOD_IDLEMODE_FORCE; - else - idlemode = HWMOD_IDLEMODE_SMART; + } else { + if (sf & SYSC_HAS_ENAWAKEUP) + _enable_wakeup(oh, &v); + if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + } _set_slave_idlemode(oh, idlemode, &v); } @@ -1455,10 +1467,6 @@ static void _idle_sysc(struct omap_hwmod *oh) _set_master_standbymode(oh, idlemode, &v); } - /* If slave is in SMARTIDLE, also enable wakeup */ - if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); } -- cgit v1.2.3 From ca43ea345de96dc214be790b6cebedbdfe110b63 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 15 May 2013 20:18:38 +0530 Subject: ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active Some IPs (like UART) need the sidle mode to be controlled in SW only while they are active. Once they go inactive, they need the IP to be put back in HW control so they are also wakeup capable. The flag HWMOD_SWSUP_SIDLE takes care of IPs which need the sidle mode to be *always* controlled in SWSUP. We now have a need to control IPs sidle mode in SWSUP only while its active. So define a new flag 'HWMOD_SWSUP_SIDLE_ACT' to help the framework know about these new IP requirements. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra Nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 3 ++- arch/arm/mach-omap2/omap_hwmod.h | 4 ++++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index c28552bfeb8d..5739429894b0 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1356,7 +1356,8 @@ static void _enable_sysc(struct omap_hwmod *oh) clkdm = _get_clkdm(oh); if (sf & SYSC_HAS_SIDLEMODE) { - if (oh->flags & HWMOD_SWSUP_SIDLE) { + if (oh->flags & HWMOD_SWSUP_SIDLE || + oh->flags & HWMOD_SWSUP_SIDLE_ACT) { idlemode = HWMOD_IDLEMODE_NO; } else { if (sf & SYSC_HAS_ENAWAKEUP) diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index fe5962921f07..8498774b5fb1 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -463,6 +463,9 @@ struct omap_hwmod_omap4_prcm { * is kept in force-standby mode. Failing to do so causes PM problems * with musb on OMAP3630 at least. Note that musb has a dedicated register * to control MSTANDBY signal when MIDLEMODE is set to force-standby. + * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module + * out of idle, but rely on smart-idle to the put it back in idle, + * so the wakeups are still functional (Only known case for now is UART) */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -476,6 +479,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) #define HWMOD_BLOCK_WFI (1 << 10) #define HWMOD_FORCE_MSTANDBY (1 << 11) +#define HWMOD_SWSUP_SIDLE_ACT (1 << 12) /* * omap_hwmod._int_flags definitions -- cgit v1.2.3 From 66dde54e978a310c57a40023ff39835fa5ccd7a3 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:39 +0530 Subject: ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes OMAP UART IP needs software control for slave idle modes based on functional state of the IP. i.e The IP slave idle settings should be set to 'noidle' when being used and then put back to 'smart_idle' when unused. Currently this is handled by the driver with function pointers implemented in platform code. This however breaks in case of device tree because of missing idle handling APIs. Previous patches in this series added a flag HWMOD_SWSUP_SIDLE_ACTIVE which takes care of the mentioned requirement. Hence add the flag for all UART IPs to take advantage of feature supported by framework. Subsequent patches removes the slave idle handling from driver code. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra Nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 3 +++ arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 6 ++++++ arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 4 ++++ arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 6 +++++- 4 files changed, 18 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index c8c64b3e1acc..d05fc7b54567 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -512,6 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -531,6 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -550,6 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 01d8f324450a..075f7cc51026 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -1995,6 +1995,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = { .name = "uart1", .class = &uart_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart1_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_wkupdm_ck", @@ -2015,6 +2016,7 @@ static struct omap_hwmod am33xx_uart2_hwmod = { .name = "uart2", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart2_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2042,6 +2044,7 @@ static struct omap_hwmod am33xx_uart3_hwmod = { .name = "uart3", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart3_irqs, .sdma_reqs = uart3_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2062,6 +2065,7 @@ static struct omap_hwmod am33xx_uart4_hwmod = { .name = "uart4", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart4_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2082,6 +2086,7 @@ static struct omap_hwmod am33xx_uart5_hwmod = { .name = "uart5", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart5_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2102,6 +2107,7 @@ static struct omap_hwmod am33xx_uart6_hwmod = { .name = "uart6", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart6_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 4083606ea1da..31c7126eb3bb 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -490,6 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -508,6 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -526,6 +528,7 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -555,6 +558,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { .mpu_irqs = uart4_mpu_irqs, .sdma_reqs = uart4_sdma_reqs, .main_clk = "uart4_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index eaba9dc91a0d..848b6dc67590 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -3434,6 +3434,7 @@ static struct omap_hwmod omap44xx_uart1_hwmod = { .name = "uart1", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart1_irqs, .sdma_reqs = omap44xx_uart1_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3462,6 +3463,7 @@ static struct omap_hwmod omap44xx_uart2_hwmod = { .name = "uart2", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart2_irqs, .sdma_reqs = omap44xx_uart2_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3490,7 +3492,8 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { .name = "uart3", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | + HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart3_irqs, .sdma_reqs = omap44xx_uart3_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3519,6 +3522,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .name = "uart4", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart4_irqs, .sdma_reqs = omap44xx_uart4_sdma_reqs, .main_clk = "func_48m_fclk", -- cgit v1.2.3 From e59cd225c0ad280122cb69e04cd66699557875a4 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:40 +0530 Subject: ARM: OMAP2+: serial: Remove the un-used slave idle hooks UART IP idle handling now taken care by runtime pm backend(hwmod) indirectly and OMAP serial driver is also cleaned up accordingly. So remove the un-used slave idle platforms hooks now. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/serial.c | 31 ------------------------------- 1 file changed, 31 deletions(-) diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 8396b5b7e912..f6601563aa69 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -95,38 +95,9 @@ static void omap_uart_enable_wakeup(struct device *dev, bool enable) omap_hwmod_disable_wakeup(od->hwmods[0]); } -/* - * Errata i291: [UART]:Cannot Acknowledge Idle Requests - * in Smartidle Mode When Configured for DMA Operations. - * WA: configure uart in force idle mode. - */ -static void omap_uart_set_noidle(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); -} - -static void omap_uart_set_smartidle(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - u8 idlemode; - - if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP) - idlemode = HWMOD_IDLEMODE_SMART_WKUP; - else - idlemode = HWMOD_IDLEMODE_SMART; - - omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode); -} - #else static void omap_uart_enable_wakeup(struct device *dev, bool enable) {} -static void omap_uart_set_noidle(struct device *dev) {} -static void omap_uart_set_smartidle(struct device *dev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX @@ -299,8 +270,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; omap_up.flags = UPF_BOOT_AUTOCONF; omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; - omap_up.set_forceidle = omap_uart_set_smartidle; - omap_up.set_noidle = omap_uart_set_noidle; omap_up.enable_wakeup = omap_uart_enable_wakeup; omap_up.dma_rx_buf_size = info->dma_rx_buf_size; omap_up.dma_rx_timeout = info->dma_rx_timeout; -- cgit v1.2.3 From 7f18d05a1af75142d4856a91ffd2f1d8eb553c12 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:41 +0530 Subject: SERIAL: OMAP: Remove the slave idle handling from the driver UART IP slave idle handling now taken care by runtime pm backend(hwmod layer) so remove the hackery from the driver. As discussed on the list, in future if dma mode needs to be brought back to this driver, UART sysc handling needs to be updated in framework such a way that no-idle/force idle profile can be supported. Given the broken dma mode for OMAP uarts, its very unlikely. Acked-by: Greg Kroah-Hartman Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- drivers/tty/serial/omap-serial.c | 23 ----------------------- include/linux/platform_data/serial-omap.h | 2 -- 2 files changed, 25 deletions(-) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 30d4f7a783cd..f0b9f6b52b32 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -202,26 +202,6 @@ static int serial_omap_get_context_loss_count(struct uart_omap_port *up) return pdata->get_context_loss_count(up->dev); } -static void serial_omap_set_forceidle(struct uart_omap_port *up) -{ - struct omap_uart_port_info *pdata = up->dev->platform_data; - - if (!pdata || !pdata->set_forceidle) - return; - - pdata->set_forceidle(up->dev); -} - -static void serial_omap_set_noidle(struct uart_omap_port *up) -{ - struct omap_uart_port_info *pdata = up->dev->platform_data; - - if (!pdata || !pdata->set_noidle) - return; - - pdata->set_noidle(up->dev); -} - static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable) { struct omap_uart_port_info *pdata = up->dev->platform_data; @@ -298,8 +278,6 @@ static void serial_omap_stop_tx(struct uart_port *port) serial_out(up, UART_IER, up->ier); } - serial_omap_set_forceidle(up); - pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); } @@ -364,7 +342,6 @@ static void serial_omap_start_tx(struct uart_port *port) pm_runtime_get_sync(up->dev); serial_omap_enable_ier_thri(up); - serial_omap_set_noidle(up); pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); } diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h index ff9b0aab5281..c860c1b314c0 100644 --- a/include/linux/platform_data/serial-omap.h +++ b/include/linux/platform_data/serial-omap.h @@ -43,8 +43,6 @@ struct omap_uart_port_info { int DTR_present; int (*get_context_loss_count)(struct device *); - void (*set_forceidle)(struct device *); - void (*set_noidle)(struct device *); void (*enable_wakeup)(struct device *, bool); }; -- cgit v1.2.3 From 3260c76055afc6c9396e5ad9f9e599505ea8891f Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:42 +0530 Subject: ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis With the OMAP serial driver sysc cleanup patches in this series, we can now remove the hwmod external apis for sysc fiddling. While at this, also remove unused sysc auto idle api from hwmod code. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 68 ---------------------------------------- arch/arm/mach-omap2/omap_hwmod.h | 3 -- 2 files changed, 71 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 5739429894b0..03931425029b 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2254,42 +2254,6 @@ static int _idle(struct omap_hwmod *oh) return 0; } -/** - * omap_hwmod_set_ocp_autoidle - set the hwmod's OCP autoidle bit - * @oh: struct omap_hwmod * - * @autoidle: desired AUTOIDLE bitfield value (0 or 1) - * - * Sets the IP block's OCP autoidle bit in hardware, and updates our - * local copy. Intended to be used by drivers that require - * direct manipulation of the AUTOIDLE bits. - * Returns -EINVAL if @oh is null or is not in the ENABLED state, or passes - * along the return value from _set_module_autoidle(). - * - * Any users of this function should be scrutinized carefully. - */ -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle) -{ - u32 v; - int retval = 0; - unsigned long flags; - - if (!oh || oh->_state != _HWMOD_STATE_ENABLED) - return -EINVAL; - - spin_lock_irqsave(&oh->_lock, flags); - - v = oh->_sysc_cache; - - retval = _set_module_autoidle(oh, autoidle, &v); - - if (!retval) - _write_sysconfig(v, oh); - - spin_unlock_irqrestore(&oh->_lock, flags); - - return retval; -} - /** * _shutdown - shutdown an omap_hwmod * @oh: struct omap_hwmod * @@ -3188,38 +3152,6 @@ error: return ret; } -/** - * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode - * @oh: struct omap_hwmod * - * @idlemode: SIDLEMODE field bits (shifted to bit 0) - * - * Sets the IP block's OCP slave idlemode in hardware, and updates our - * local copy. Intended to be used by drivers that have some erratum - * that requires direct manipulation of the SIDLEMODE bits. Returns - * -EINVAL if @oh is null, or passes along the return value from - * _set_slave_idlemode(). - * - * XXX Does this function have any current users? If not, we should - * remove it; it is better to let the rest of the hwmod code handle this. - * Any users of this function should be scrutinized carefully. - */ -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode) -{ - u32 v; - int retval = 0; - - if (!oh) - return -EINVAL; - - v = oh->_sysc_cache; - - retval = _set_slave_idlemode(oh, idlemode, &v); - if (!retval) - _write_sysconfig(v, oh); - - return retval; -} - /** * omap_hwmod_lookup - look up a registered omap_hwmod by name * @name: name of the omap_hwmod to look up diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 8498774b5fb1..0c898f58ac9b 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -645,9 +645,6 @@ int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name); int omap_hwmod_enable_clocks(struct omap_hwmod *oh); int omap_hwmod_disable_clocks(struct omap_hwmod *oh); -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode); -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle); - int omap_hwmod_reset(struct omap_hwmod *oh); void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); -- cgit v1.2.3 From d2f83e9078b8114e3b9d09082856c1aac299aa37 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 17 May 2013 09:05:21 +0930 Subject: Hoist memcpy_fromiovec/memcpy_toiovec into lib/ ERROR: "memcpy_fromiovec" [drivers/vhost/vhost_scsi.ko] undefined! That function is only present with CONFIG_NET. Turns out that crypto/algif_skcipher.c also uses that outside net, but it actually needs sockets anyway. In addition, commit 6d4f0139d642c45411a47879325891ce2a7c164a added CONFIG_NET dependency to CONFIG_VMCI for memcpy_toiovec, so hoist that function and revert that commit too. socket.h already includes uio.h, so no callers need updating; trying only broke things fo x86_64 randconfig (thanks Fengguang!). Reported-by: Randy Dunlap Acked-by: David S. Miller Acked-by: Michael S. Tsirkin Signed-off-by: Rusty Russell --- drivers/misc/vmw_vmci/Kconfig | 2 +- drivers/misc/vmw_vmci/vmci_queue_pair.c | 2 +- include/linux/socket.h | 2 -- include/linux/uio.h | 3 ++ lib/Makefile | 2 +- lib/iovec.c | 53 +++++++++++++++++++++++++++++++++ net/core/iovec.c | 50 ------------------------------- 7 files changed, 59 insertions(+), 55 deletions(-) create mode 100644 lib/iovec.c diff --git a/drivers/misc/vmw_vmci/Kconfig b/drivers/misc/vmw_vmci/Kconfig index ea98f7e9ccd1..39c2ecadb273 100644 --- a/drivers/misc/vmw_vmci/Kconfig +++ b/drivers/misc/vmw_vmci/Kconfig @@ -4,7 +4,7 @@ config VMWARE_VMCI tristate "VMware VMCI Driver" - depends on X86 && PCI && NET + depends on X86 && PCI help This is VMware's Virtual Machine Communication Interface. It enables high-speed communication between host and guest in a virtual diff --git a/drivers/misc/vmw_vmci/vmci_queue_pair.c b/drivers/misc/vmw_vmci/vmci_queue_pair.c index d94245dbd765..8ff2e5ee8fb8 100644 --- a/drivers/misc/vmw_vmci/vmci_queue_pair.c +++ b/drivers/misc/vmw_vmci/vmci_queue_pair.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include diff --git a/include/linux/socket.h b/include/linux/socket.h index 428c37a1f95c..33bf2dfab19d 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -305,7 +305,6 @@ struct ucred { extern void cred_to_ucred(struct pid *pid, const struct cred *cred, struct ucred *ucred); -extern int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len); extern int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov, int offset, int len); extern int csum_partial_copy_fromiovecend(unsigned char *kdata, @@ -314,7 +313,6 @@ extern int csum_partial_copy_fromiovecend(unsigned char *kdata, unsigned int len, __wsum *csump); extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr_storage *address, int mode); -extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len); extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata, int offset, int len); extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr_storage *kaddr); diff --git a/include/linux/uio.h b/include/linux/uio.h index 629aaf51f30b..c55ce243cc09 100644 --- a/include/linux/uio.h +++ b/include/linux/uio.h @@ -35,4 +35,7 @@ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs) } unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to); + +int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len); +int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len); #endif diff --git a/lib/Makefile b/lib/Makefile index e9c52e1b853a..237721165035 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -9,7 +9,7 @@ endif lib-y := ctype.o string.o vsprintf.o cmdline.o \ rbtree.o radix-tree.o dump_stack.o timerqueue.o\ - idr.o int_sqrt.o extable.o \ + idr.o int_sqrt.o extable.o iovec.o \ sha1.o md5.o irq_regs.o reciprocal_div.o argv_split.o \ proportions.o flex_proportions.o prio_heap.o ratelimit.o show_mem.o \ is_single_threaded.o plist.o decompress.o kobject_uevent.o \ diff --git a/lib/iovec.c b/lib/iovec.c new file mode 100644 index 000000000000..454baa88bf27 --- /dev/null +++ b/lib/iovec.c @@ -0,0 +1,53 @@ +#include +#include +#include + +/* + * Copy iovec to kernel. Returns -EFAULT on error. + * + * Note: this modifies the original iovec. + */ + +int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len) +{ + while (len > 0) { + if (iov->iov_len) { + int copy = min_t(unsigned int, len, iov->iov_len); + if (copy_from_user(kdata, iov->iov_base, copy)) + return -EFAULT; + len -= copy; + kdata += copy; + iov->iov_base += copy; + iov->iov_len -= copy; + } + iov++; + } + + return 0; +} +EXPORT_SYMBOL(memcpy_fromiovec); + +/* + * Copy kernel to iovec. Returns -EFAULT on error. + * + * Note: this modifies the original iovec. + */ + +int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len) +{ + while (len > 0) { + if (iov->iov_len) { + int copy = min_t(unsigned int, iov->iov_len, len); + if (copy_to_user(iov->iov_base, kdata, copy)) + return -EFAULT; + kdata += copy; + len -= copy; + iov->iov_len -= copy; + iov->iov_base += copy; + } + iov++; + } + + return 0; +} +EXPORT_SYMBOL(memcpy_toiovec); diff --git a/net/core/iovec.c b/net/core/iovec.c index 7e7aeb01de45..de178e462682 100644 --- a/net/core/iovec.c +++ b/net/core/iovec.c @@ -73,31 +73,6 @@ int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr_storage *a return err; } -/* - * Copy kernel to iovec. Returns -EFAULT on error. - * - * Note: this modifies the original iovec. - */ - -int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len) -{ - while (len > 0) { - if (iov->iov_len) { - int copy = min_t(unsigned int, iov->iov_len, len); - if (copy_to_user(iov->iov_base, kdata, copy)) - return -EFAULT; - kdata += copy; - len -= copy; - iov->iov_len -= copy; - iov->iov_base += copy; - } - iov++; - } - - return 0; -} -EXPORT_SYMBOL(memcpy_toiovec); - /* * Copy kernel to iovec. Returns -EFAULT on error. */ @@ -124,31 +99,6 @@ int memcpy_toiovecend(const struct iovec *iov, unsigned char *kdata, } EXPORT_SYMBOL(memcpy_toiovecend); -/* - * Copy iovec to kernel. Returns -EFAULT on error. - * - * Note: this modifies the original iovec. - */ - -int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len) -{ - while (len > 0) { - if (iov->iov_len) { - int copy = min_t(unsigned int, len, iov->iov_len); - if (copy_from_user(kdata, iov->iov_base, copy)) - return -EFAULT; - len -= copy; - kdata += copy; - iov->iov_base += copy; - iov->iov_len -= copy; - } - iov++; - } - - return 0; -} -EXPORT_SYMBOL(memcpy_fromiovec); - /* * Copy iovec from kernel. Returns -EFAULT on error. */ -- cgit v1.2.3 From 6407d75afd08545f2252bb39806ffd3f10c7faac Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 17 May 2013 10:44:15 +0930 Subject: virtio_console: fix uapi header uapi should use __u32 not u32. Fix a macro in virtio_console.h which uses u32. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell Cc: stable@kernel.org --- include/uapi/linux/virtio_console.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/linux/virtio_console.h b/include/uapi/linux/virtio_console.h index ee13ab6c3614..c312f16bc4e7 100644 --- a/include/uapi/linux/virtio_console.h +++ b/include/uapi/linux/virtio_console.h @@ -39,7 +39,7 @@ #define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */ #define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */ -#define VIRTIO_CONSOLE_BAD_ID (~(u32)0) +#define VIRTIO_CONSOLE_BAD_ID (~(__u32)0) struct virtio_console_config { /* colums of the screens */ -- cgit v1.2.3 From c5e624f8437331e1d985b4bb5efe3c4229569550 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 3 May 2013 06:40:37 +1000 Subject: drm/nouveau: fix build with nv50->nvc0 Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/core/engine/device/nve0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/core/engine/device/nve0.c b/drivers/gpu/drm/nouveau/core/engine/device/nve0.c index 08f7b52d9e0c..a354e409cdff 100644 --- a/drivers/gpu/drm/nouveau/core/engine/device/nve0.c +++ b/drivers/gpu/drm/nouveau/core/engine/device/nve0.c @@ -149,7 +149,7 @@ nve0_identify(struct nouveau_device *device) device->oclass[NVDEV_SUBDEV_CLOCK ] = &nvc0_clock_oclass; device->oclass[NVDEV_SUBDEV_THERM ] = &nvd0_therm_oclass; device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass; - device->oclass[NVDEV_SUBDEV_DEVINIT] = &nvc0_devinit_oclass; + device->oclass[NVDEV_SUBDEV_DEVINIT] = &nv50_devinit_oclass; device->oclass[NVDEV_SUBDEV_MC ] = &nvc0_mc_oclass; device->oclass[NVDEV_SUBDEV_BUS ] = &nvc0_bus_oclass; device->oclass[NVDEV_SUBDEV_TIMER ] = &nv04_timer_oclass; -- cgit v1.2.3 From 46b47b8a7d9223b12ddcabf1f3fc6e753e2d84a1 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 7 May 2013 15:54:13 +1000 Subject: drm/nouveau/bios: fix thinko in ZM_MASK_ADD opcode Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/bios/init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/init.c b/drivers/gpu/drm/nouveau/core/subdev/bios/init.c index c300b5e7b670..c434d398d16f 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/bios/init.c +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/init.c @@ -1940,8 +1940,8 @@ init_zm_mask_add(struct nvbios_init *init) trace("ZM_MASK_ADD\tR[0x%06x] &= 0x%08x += 0x%08x\n", addr, mask, add); init->offset += 13; - data = init_rd32(init, addr) & mask; - data |= ((data + add) & ~mask); + data = init_rd32(init, addr); + data = (data & mask) | ((data + add) & ~mask); init_wr32(init, addr, data); } -- cgit v1.2.3 From 6d5f83834dc2b064b8c1202ea281820286b675a8 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 13 May 2013 16:11:12 +1000 Subject: drm/nvc0/ce: disable ce1 on a number of chipsets The falcon is present, but the rest of the copy engine doesn't appear to be... PUNITS doesn't report disabled (maybe the bits for the copy engines got added later?), so we end up trying to use a non-functional CE1, and bust all sorts of things.. Most notably, suspend/resume.. Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/device/nvc0.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c b/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c index 955af122c3a6..a36e64e98ef3 100644 --- a/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c +++ b/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c @@ -138,7 +138,6 @@ nvc0_identify(struct nouveau_device *device) device->oclass[NVDEV_ENGINE_BSP ] = &nvc0_bsp_oclass; device->oclass[NVDEV_ENGINE_PPP ] = &nvc0_ppp_oclass; device->oclass[NVDEV_ENGINE_COPY0 ] = &nvc0_copy0_oclass; - device->oclass[NVDEV_ENGINE_COPY1 ] = &nvc0_copy1_oclass; device->oclass[NVDEV_ENGINE_DISP ] = &nva3_disp_oclass; break; case 0xce: @@ -225,7 +224,6 @@ nvc0_identify(struct nouveau_device *device) device->oclass[NVDEV_ENGINE_BSP ] = &nvc0_bsp_oclass; device->oclass[NVDEV_ENGINE_PPP ] = &nvc0_ppp_oclass; device->oclass[NVDEV_ENGINE_COPY0 ] = &nvc0_copy0_oclass; - device->oclass[NVDEV_ENGINE_COPY1 ] = &nvc0_copy1_oclass; device->oclass[NVDEV_ENGINE_DISP ] = &nva3_disp_oclass; break; case 0xc8: -- cgit v1.2.3 From 49debbe4540efd08b4e9a1c499dce392a43bf1ed Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 14 May 2013 11:37:18 +1000 Subject: drm/nvc0/ltcg: fix handling of disabled partitions Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c b/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c index e4940fb166e8..7c6194f2e074 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c +++ b/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c @@ -29,7 +29,6 @@ struct nvc0_ltcg_priv { struct nouveau_ltcg base; u32 part_nr; - u32 part_mask; u32 subp_nr; struct nouveau_mm tags; u32 num_tags; @@ -105,8 +104,6 @@ nvc0_ltcg_tags_clear(struct nouveau_ltcg *ltcg, u32 first, u32 count) /* wait until it's finished with clearing */ for (p = 0; p < priv->part_nr; ++p) { - if (!(priv->part_mask & (1 << p))) - continue; for (i = 0; i < priv->subp_nr; ++i) nv_wait(priv, 0x1410c8 + p * 0x2000 + i * 0x400, ~0, 0); } @@ -167,16 +164,20 @@ nvc0_ltcg_ctor(struct nouveau_object *parent, struct nouveau_object *engine, { struct nvc0_ltcg_priv *priv; struct nouveau_fb *pfb = nouveau_fb(parent); - int ret; + u32 parts, mask; + int ret, i; ret = nouveau_ltcg_create(parent, engine, oclass, &priv); *pobject = nv_object(priv); if (ret) return ret; - priv->part_nr = nv_rd32(priv, 0x022438); - priv->part_mask = nv_rd32(priv, 0x022554); - + parts = nv_rd32(priv, 0x022438); + mask = nv_rd32(priv, 0x022554); + for (i = 0; i < parts; i++) { + if (!(mask & (1 << i))) + priv->part_nr++; + } priv->subp_nr = nv_rd32(priv, 0x17e8dc) >> 28; nv_mask(priv, 0x17e820, 0x00100000, 0x00000000); /* INTR_EN &= ~0x10 */ -- cgit v1.2.3 From fe6fc096b82eb0e84a0609f6431f7069f6c6c347 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 14 May 2013 12:03:33 +1000 Subject: drm/nve0/ltcg: poke the partition count into yet another register Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c b/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c index 7c6194f2e074..fb794e997fbc 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c +++ b/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c @@ -118,6 +118,8 @@ nvc0_ltcg_init_tag_ram(struct nouveau_fb *pfb, struct nvc0_ltcg_priv *priv) int ret; nv_wr32(priv, 0x17e8d8, priv->part_nr); + if (nv_device(pfb)->card_type >= NV_E0) + nv_wr32(priv, 0x17e000, priv->part_nr); /* tags for 1/4 of VRAM should be enough (8192/4 per GiB of VRAM) */ priv->num_tags = (pfb->ram.size >> 17) / 4; -- cgit v1.2.3 From c2e3259b7b6c89686892e4fbcc56dbcab14f1acf Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 6 May 2013 13:54:50 +1000 Subject: drm/nve0/fifo: prevent races between clients updating playlists Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c index 9151919fb831..56192a7242ae 100644 --- a/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c +++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c @@ -94,11 +94,13 @@ nve0_fifo_playlist_update(struct nve0_fifo_priv *priv, u32 engine) u32 match = (engine << 16) | 0x00000001; int i, p; + mutex_lock(&nv_subdev(priv)->mutex); cur = engn->playlist[engn->cur_playlist]; if (unlikely(cur == NULL)) { int ret = nouveau_gpuobj_new(nv_object(priv), NULL, 0x8000, 0x1000, 0, &cur); if (ret) { + mutex_unlock(&nv_subdev(priv)->mutex); nv_error(priv, "playlist alloc failed\n"); return; } @@ -122,6 +124,7 @@ nve0_fifo_playlist_update(struct nve0_fifo_priv *priv, u32 engine) nv_wr32(priv, 0x002274, (engine << 20) | (p >> 3)); if (!nv_wait(priv, 0x002284 + (engine * 4), 0x00100000, 0x00000000)) nv_error(priv, "playlist %d update timeout\n", engine); + mutex_unlock(&nv_subdev(priv)->mutex); } static int -- cgit v1.2.3 From fadb171902df5c6ba38029a9306c2b0d559987b9 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 13 May 2013 10:02:11 +1000 Subject: drm/nvc0/fifo: prevent races between clients updating playlists Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c index 4d4a6b905370..1613193e21e6 100644 --- a/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c +++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c @@ -71,6 +71,7 @@ nvc0_fifo_playlist_update(struct nvc0_fifo_priv *priv) struct nouveau_gpuobj *cur; int i, p; + mutex_lock(&nv_subdev(priv)->mutex); cur = priv->playlist[priv->cur_playlist]; priv->cur_playlist = !priv->cur_playlist; @@ -87,6 +88,7 @@ nvc0_fifo_playlist_update(struct nvc0_fifo_priv *priv) nv_wr32(priv, 0x002274, 0x01f00000 | (p >> 3)); if (!nv_wait(priv, 0x00227c, 0x00100000, 0x00000000)) nv_error(priv, "playlist update failed\n"); + mutex_unlock(&nv_subdev(priv)->mutex); } static int -- cgit v1.2.3 From 9426eedb26cfe646a843295ac7f91bf866323f92 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 13 May 2013 11:09:59 +1000 Subject: drm/nvc0/fifo: prevent CHAN_TABLE_ERROR:CHANNEL_PENDING on fifo fini Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c index 1613193e21e6..46dfa68c47bb 100644 --- a/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c +++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c @@ -250,9 +250,17 @@ nvc0_fifo_chan_fini(struct nouveau_object *object, bool suspend) struct nvc0_fifo_priv *priv = (void *)object->engine; struct nvc0_fifo_chan *chan = (void *)object; u32 chid = chan->base.chid; + u32 mask, engine; nv_mask(priv, 0x003004 + (chid * 8), 0x00000001, 0x00000000); nvc0_fifo_playlist_update(priv); + mask = nv_rd32(priv, 0x0025a4); + for (engine = 0; mask && engine < 16; engine++) { + if (!(mask & (1 << engine))) + continue; + nv_mask(priv, 0x0025a8 + (engine * 4), 0x00000000, 0x00000000); + mask &= ~(1 << engine); + } nv_wr32(priv, 0x003000 + (chid * 8), 0x00000000); return nouveau_fifo_channel_fini(&chan->base, suspend); -- cgit v1.2.3 From b5096566f6e1ee2b88324772f020ae9bc0cfa9a0 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 14 May 2013 13:33:56 +1000 Subject: drm/nv50/fifo: prevent races between clients updating playlists Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c index ddaeb5572903..89bf459d584b 100644 --- a/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c @@ -47,6 +47,7 @@ nv50_fifo_playlist_update(struct nv50_fifo_priv *priv) struct nouveau_gpuobj *cur; int i, p; + mutex_lock(&nv_subdev(priv)->mutex); cur = priv->playlist[priv->cur_playlist]; priv->cur_playlist = !priv->cur_playlist; @@ -60,6 +61,7 @@ nv50_fifo_playlist_update(struct nv50_fifo_priv *priv) nv_wr32(priv, 0x0032f4, cur->addr >> 12); nv_wr32(priv, 0x0032ec, p); nv_wr32(priv, 0x002500, 0x00000101); + mutex_unlock(&nv_subdev(priv)->mutex); } static int -- cgit v1.2.3 From 81dff21b643f48c14010a97ffc799e1920d751e5 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 7 May 2013 08:33:10 +1000 Subject: drm/nouveau: ensure channels are stopped before saving fences for suspend Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_drm.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 46c152ff0a80..383f4e6ea9d1 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -453,18 +453,32 @@ nouveau_do_suspend(struct drm_device *dev) NV_INFO(drm, "evicting buffers...\n"); ttm_bo_evict_mm(&drm->ttm.bdev, TTM_PL_VRAM); + NV_INFO(drm, "waiting for kernel channels to go idle...\n"); + if (drm->cechan) { + ret = nouveau_channel_idle(drm->cechan); + if (ret) + return ret; + } + + if (drm->channel) { + ret = nouveau_channel_idle(drm->channel); + if (ret) + return ret; + } + + NV_INFO(drm, "suspending client object trees...\n"); if (drm->fence && nouveau_fence(drm)->suspend) { if (!nouveau_fence(drm)->suspend(drm)) return -ENOMEM; } - NV_INFO(drm, "suspending client object trees...\n"); list_for_each_entry(cli, &drm->clients, head) { ret = nouveau_client_fini(&cli->base, true); if (ret) goto fail_client; } + NV_INFO(drm, "suspending kernel object tree...\n"); ret = nouveau_client_fini(&drm->client.base, true); if (ret) goto fail_client; @@ -514,17 +528,18 @@ nouveau_do_resume(struct drm_device *dev) nouveau_agp_reset(drm); - NV_INFO(drm, "resuming client object trees...\n"); + NV_INFO(drm, "resuming kernel object tree...\n"); nouveau_client_init(&drm->client.base); nouveau_agp_init(drm); + NV_INFO(drm, "resuming client object trees...\n"); + if (drm->fence && nouveau_fence(drm)->resume) + nouveau_fence(drm)->resume(drm); + list_for_each_entry(cli, &drm->clients, head) { nouveau_client_init(&cli->base); } - if (drm->fence && nouveau_fence(drm)->resume) - nouveau_fence(drm)->resume(drm); - nouveau_run_vbios_init(dev); nouveau_pm_resume(dev); -- cgit v1.2.3 From ea6836dd7ef9cfbed5dce421190009f9eed00b7e Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Sat, 18 May 2013 01:18:28 +0000 Subject: bonding: fix set mode race conditions Changing the mode without any locking can result in multiple races (e.g. upping a bond, enslaving/releasing). Depending on which race is hit the impact can vary from incosistent bond state to kernel crash. Use RTNL to synchronize the mode setting with the dangerous races. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- drivers/net/bonding/bond_sysfs.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index ea7a388f4843..77ea237de900 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -316,6 +316,9 @@ static ssize_t bonding_store_mode(struct device *d, int new_value, ret = count; struct bonding *bond = to_bond(d); + if (!rtnl_trylock()) + return restart_syscall(); + if (bond->dev->flags & IFF_UP) { pr_err("unable to update mode of %s because interface is up.\n", bond->dev->name); @@ -352,6 +355,7 @@ static ssize_t bonding_store_mode(struct device *d, bond->dev->name, bond_mode_tbl[new_value].modename, new_value); out: + rtnl_unlock(); return ret; } static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, -- cgit v1.2.3 From acca2674a71816c5c9d0caa81fecd33b491fd68f Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Sat, 18 May 2013 01:18:29 +0000 Subject: bonding: replace %x with %pI4 for IPv4 addresses There're few pr_debug() places that can provide the IPv4 address in dotted decimal format instead which is more helpful. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 449ad9bbe45c..d4635987bda9 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2556,8 +2556,8 @@ static void bond_arp_send(struct net_device *slave_dev, int arp_op, __be32 dest_ { struct sk_buff *skb; - pr_debug("arp %d on slave %s: dst %x src %x vid %d\n", arp_op, - slave_dev->name, dest_ip, src_ip, vlan_id); + pr_debug("arp %d on slave %s: dst %pI4 src %pI4 vid %d\n", arp_op, + slave_dev->name, &dest_ip, &src_ip, vlan_id); skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip, NULL, slave_dev->dev_addr, NULL); @@ -2589,7 +2589,7 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave) __be32 addr; if (!targets[i]) break; - pr_debug("basa: target %x\n", targets[i]); + pr_debug("basa: target %pI4\n", &targets[i]); if (!bond_vlan_used(bond)) { pr_debug("basa: empty vlan: arp_send\n"); addr = bond_confirm_addr(bond->dev, targets[i], 0); -- cgit v1.2.3 From 5a5c5fd48e3bcd57572e9a7a4964ed8f38a20b87 Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Sat, 18 May 2013 01:18:30 +0000 Subject: bonding: arp_ip_count and arp_targets can be wrong When getting arp_ip_targets if we encounter a bad IP, arp_ip_count still gets increased and all the targets after the wrong one will not be probed if arp_interval is enabled after that (unless a new IP target is added through sysfs) because of the zero entry, in this case reading arp_ip_target through sysfs will show valid targets even if there's a zero entry. Example: 1.2.3.4,4.5.6.7,blah,5.6.7.8 When retrieving the list from arp_ip_target the output would be: 1.2.3.4,4.5.6.7,5.6.7.8 but there will be a 0 entry between 4.5.6.7 and 5.6.7.8. If arp_interval is enabled after that 5.6.7.8 will never be checked because of that. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index d4635987bda9..29b846cbfb48 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4471,7 +4471,7 @@ int bond_parse_parm(const char *buf, const struct bond_parm_tbl *tbl) static int bond_check_params(struct bond_params *params) { - int arp_validate_value, fail_over_mac_value, primary_reselect_value; + int arp_validate_value, fail_over_mac_value, primary_reselect_value, i; /* * Convert string parameters. @@ -4651,19 +4651,18 @@ static int bond_check_params(struct bond_params *params) arp_interval = BOND_LINK_ARP_INTERV; } - for (arp_ip_count = 0; - (arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[arp_ip_count]; - arp_ip_count++) { + for (arp_ip_count = 0, i = 0; + (arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[i]; i++) { /* not complete check, but should be good enough to catch mistakes */ - __be32 ip = in_aton(arp_ip_target[arp_ip_count]); - if (!isdigit(arp_ip_target[arp_ip_count][0]) || - ip == 0 || ip == htonl(INADDR_BROADCAST)) { + __be32 ip = in_aton(arp_ip_target[i]); + if (!isdigit(arp_ip_target[i][0]) || ip == 0 || + ip == htonl(INADDR_BROADCAST)) { pr_warning("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n", - arp_ip_target[arp_ip_count]); + arp_ip_target[i]); arp_interval = 0; } else { - arp_target[arp_ip_count] = ip; + arp_target[arp_ip_count++] = ip; } } @@ -4697,8 +4696,6 @@ static int bond_check_params(struct bond_params *params) if (miimon) { pr_info("MII link monitoring set to %d ms\n", miimon); } else if (arp_interval) { - int i; - pr_info("ARP monitoring set to %d ms, validate %s, with %d target(s):", arp_interval, arp_validate_tbl[arp_validate_value].modename, -- cgit v1.2.3 From 318debd897735fe834545b6f3d2e96bcc9210b9f Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Sat, 18 May 2013 01:18:31 +0000 Subject: bonding: fix multiple 3ad mode sysfs race conditions When bond_3ad_get_active_agg_info() is used in all show_ad_ functions it is not protected against slave manipulation and since it walks over the slaves and uses them, this can easily result in NULL pointer dereference or use of freed memory. Both the new wrapper and the internal function are exported to the bonding as they're needed in different places. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- drivers/net/bonding/bond_3ad.c | 21 +++++++++++++++++---- drivers/net/bonding/bond_3ad.h | 2 ++ drivers/net/bonding/bond_procfs.c | 2 +- drivers/net/bonding/bond_sysfs.c | 9 ++++----- 4 files changed, 24 insertions(+), 10 deletions(-) diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index fc58d118d844..390061d09693 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -2360,14 +2360,15 @@ int bond_3ad_set_carrier(struct bonding *bond) } /** - * bond_3ad_get_active_agg_info - get information of the active aggregator + * __bond_3ad_get_active_agg_info - get information of the active aggregator * @bond: bonding struct to work on * @ad_info: ad_info struct to fill with the bond's info * * Returns: 0 on success * < 0 on error */ -int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info) +int __bond_3ad_get_active_agg_info(struct bonding *bond, + struct ad_info *ad_info) { struct aggregator *aggregator = NULL; struct port *port; @@ -2391,6 +2392,18 @@ int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info) return -1; } +/* Wrapper used to hold bond->lock so no slave manipulation can occur */ +int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info) +{ + int ret; + + read_lock(&bond->lock); + ret = __bond_3ad_get_active_agg_info(bond, ad_info); + read_unlock(&bond->lock); + + return ret; +} + int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) { struct slave *slave, *start_at; @@ -2402,8 +2415,8 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) struct ad_info ad_info; int res = 1; - if (bond_3ad_get_active_agg_info(bond, &ad_info)) { - pr_debug("%s: Error: bond_3ad_get_active_agg_info failed\n", + if (__bond_3ad_get_active_agg_info(bond, &ad_info)) { + pr_debug("%s: Error: __bond_3ad_get_active_agg_info failed\n", dev->name); goto out; } diff --git a/drivers/net/bonding/bond_3ad.h b/drivers/net/bonding/bond_3ad.h index 0cfaa4afdece..5d91ad0cc041 100644 --- a/drivers/net/bonding/bond_3ad.h +++ b/drivers/net/bonding/bond_3ad.h @@ -273,6 +273,8 @@ void bond_3ad_adapter_speed_changed(struct slave *slave); void bond_3ad_adapter_duplex_changed(struct slave *slave); void bond_3ad_handle_link_change(struct slave *slave, char link); int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info); +int __bond_3ad_get_active_agg_info(struct bonding *bond, + struct ad_info *ad_info); int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev); int bond_3ad_lacpdu_recv(const struct sk_buff *skb, struct bonding *bond, struct slave *slave); diff --git a/drivers/net/bonding/bond_procfs.c b/drivers/net/bonding/bond_procfs.c index 94d06f1307b8..4060d41f0ee7 100644 --- a/drivers/net/bonding/bond_procfs.c +++ b/drivers/net/bonding/bond_procfs.c @@ -130,7 +130,7 @@ static void bond_info_show_master(struct seq_file *seq) seq_printf(seq, "Aggregator selection policy (ad_select): %s\n", ad_select_tbl[bond->params.ad_select].modename); - if (bond_3ad_get_active_agg_info(bond, &ad_info)) { + if (__bond_3ad_get_active_agg_info(bond, &ad_info)) { seq_printf(seq, "bond %s has no active aggregator\n", bond->dev->name); } else { diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 77ea237de900..d7434e0a610e 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -1319,7 +1319,6 @@ static ssize_t bonding_show_mii_status(struct device *d, } static DEVICE_ATTR(mii_status, S_IRUGO, bonding_show_mii_status, NULL); - /* * Show current 802.3ad aggregator ID. */ @@ -1333,7 +1332,7 @@ static ssize_t bonding_show_ad_aggregator(struct device *d, if (bond->params.mode == BOND_MODE_8023AD) { struct ad_info ad_info; count = sprintf(buf, "%d\n", - (bond_3ad_get_active_agg_info(bond, &ad_info)) + bond_3ad_get_active_agg_info(bond, &ad_info) ? 0 : ad_info.aggregator_id); } @@ -1355,7 +1354,7 @@ static ssize_t bonding_show_ad_num_ports(struct device *d, if (bond->params.mode == BOND_MODE_8023AD) { struct ad_info ad_info; count = sprintf(buf, "%d\n", - (bond_3ad_get_active_agg_info(bond, &ad_info)) + bond_3ad_get_active_agg_info(bond, &ad_info) ? 0 : ad_info.ports); } @@ -1377,7 +1376,7 @@ static ssize_t bonding_show_ad_actor_key(struct device *d, if (bond->params.mode == BOND_MODE_8023AD) { struct ad_info ad_info; count = sprintf(buf, "%d\n", - (bond_3ad_get_active_agg_info(bond, &ad_info)) + bond_3ad_get_active_agg_info(bond, &ad_info) ? 0 : ad_info.actor_key); } @@ -1399,7 +1398,7 @@ static ssize_t bonding_show_ad_partner_key(struct device *d, if (bond->params.mode == BOND_MODE_8023AD) { struct ad_info ad_info; count = sprintf(buf, "%d\n", - (bond_3ad_get_active_agg_info(bond, &ad_info)) + bond_3ad_get_active_agg_info(bond, &ad_info) ? 0 : ad_info.partner_key); } -- cgit v1.2.3 From b423e9ae49d78ea3f53b131c8d5a6087aed16fd6 Mon Sep 17 00:00:00 2001 From: françois romieu Date: Sat, 18 May 2013 01:24:46 +0000 Subject: r8169: fix offloaded tx checksum for small packets. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 8168evl offloaded checksums are wrong since commit e5195c1f31f399289347e043d6abf3ffa80f0005 ("r8169: fix 8168evl frame padding.") pads small packets to 60 bytes (without ethernet checksum). Typical symptoms appear as UDP checksums which are wrong by the count of added bytes. It isn't worth compensating. Let the driver checksum. Due to the skb length changes, TSO code is moved before the Tx descriptor gets written. Signed-off-by: Francois Romieu Tested-by: Holger Hoffstätte Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 41 ++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 14 deletions(-) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 79c520b64fdd..393f961a013c 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -5856,7 +5856,20 @@ err_out: return -EIO; } -static inline void rtl8169_tso_csum(struct rtl8169_private *tp, +static bool rtl_skb_pad(struct sk_buff *skb) +{ + if (skb_padto(skb, ETH_ZLEN)) + return false; + skb_put(skb, ETH_ZLEN - skb->len); + return true; +} + +static bool rtl_test_hw_pad_bug(struct rtl8169_private *tp, struct sk_buff *skb) +{ + return skb->len < ETH_ZLEN && tp->mac_version == RTL_GIGA_MAC_VER_34; +} + +static inline bool rtl8169_tso_csum(struct rtl8169_private *tp, struct sk_buff *skb, u32 *opts) { const struct rtl_tx_desc_info *info = tx_desc_info + tp->txd_version; @@ -5869,13 +5882,20 @@ static inline void rtl8169_tso_csum(struct rtl8169_private *tp, } else if (skb->ip_summed == CHECKSUM_PARTIAL) { const struct iphdr *ip = ip_hdr(skb); + if (unlikely(rtl_test_hw_pad_bug(tp, skb))) + return skb_checksum_help(skb) == 0 && rtl_skb_pad(skb); + if (ip->protocol == IPPROTO_TCP) opts[offset] |= info->checksum.tcp; else if (ip->protocol == IPPROTO_UDP) opts[offset] |= info->checksum.udp; else WARN_ON_ONCE(1); + } else { + if (unlikely(rtl_test_hw_pad_bug(tp, skb))) + return rtl_skb_pad(skb); } + return true; } static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb, @@ -5896,17 +5916,15 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb, goto err_stop_0; } - /* 8168evl does not automatically pad to minimum length. */ - if (unlikely(tp->mac_version == RTL_GIGA_MAC_VER_34 && - skb->len < ETH_ZLEN)) { - if (skb_padto(skb, ETH_ZLEN)) - goto err_update_stats; - skb_put(skb, ETH_ZLEN - skb->len); - } - if (unlikely(le32_to_cpu(txd->opts1) & DescOwn)) goto err_stop_0; + opts[1] = cpu_to_le32(rtl8169_tx_vlan_tag(skb)); + opts[0] = DescOwn; + + if (!rtl8169_tso_csum(tp, skb, opts)) + goto err_update_stats; + len = skb_headlen(skb); mapping = dma_map_single(d, skb->data, len, DMA_TO_DEVICE); if (unlikely(dma_mapping_error(d, mapping))) { @@ -5918,11 +5936,6 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb, tp->tx_skb[entry].len = len; txd->addr = cpu_to_le64(mapping); - opts[1] = cpu_to_le32(rtl8169_tx_vlan_tag(skb)); - opts[0] = DescOwn; - - rtl8169_tso_csum(tp, skb, opts); - frags = rtl8169_xmit_frags(tp, skb, opts); if (frags < 0) goto err_dma_1; -- cgit v1.2.3 From 96f5a846bdd60986992228bc7dae94d4d8eaacc0 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 18 May 2013 08:36:03 +0000 Subject: ip_gre: fix a possible crash in ipgre_err() Another fix needed in ipgre_err(), as parse_gre_header() might change skb->head. Bug added in commit c54419321455 (GRE: Refactor GRE tunneling code.) Signed-off-by: Eric Dumazet Cc: Pravin B Shelar Signed-off-by: David S. Miller --- net/ipv4/ip_gre.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index c625e4dad4b0..2a83591492dd 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -235,7 +235,7 @@ static void ipgre_err(struct sk_buff *skb, u32 info) */ struct net *net = dev_net(skb->dev); struct ip_tunnel_net *itn; - const struct iphdr *iph = (const struct iphdr *)skb->data; + const struct iphdr *iph; const int type = icmp_hdr(skb)->type; const int code = icmp_hdr(skb)->code; struct ip_tunnel *t; @@ -281,6 +281,7 @@ static void ipgre_err(struct sk_buff *skb, u32 info) else itn = net_generic(net, ipgre_net_id); + iph = (const struct iphdr *)skb->data; t = ip_tunnel_lookup(itn, skb->dev->ifindex, tpi.flags, iph->daddr, iph->saddr, tpi.key); -- cgit v1.2.3 From 057cf65e4f715f62acccbd9125cf63eddfe69d30 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 19 May 2013 04:41:01 +0000 Subject: bnx2x: Fix GSO for 57710/57711 chips Starting with commit 91226790bbe2dbfbba48dd79d49f2b38ef10eb97 `bnx2x: use FW 7.8.17', the bnx2x driver no longer requests the FW to perform IP checksums for IPv4 packets. This behaviour needs to be revised for 57710/57711 chips - when using GSO, if the driver will not set the IP checksum flag then packets will be transmitted by the chip without a valid IP checksum, resulting in a drop of all such packets on the receiver-side. Signed-off-by: Yuval Mintz Signed-off-by: Dmitry Kravkov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index b8fbe266ab68..be59ec4b2c30 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3313,6 +3313,7 @@ static void bnx2x_set_pbd_gso_e2(struct sk_buff *skb, u32 *parsing_data, */ static void bnx2x_set_pbd_gso(struct sk_buff *skb, struct eth_tx_parse_bd_e1x *pbd, + struct eth_tx_start_bd *tx_start_bd, u32 xmit_type) { pbd->lso_mss = cpu_to_le16(skb_shinfo(skb)->gso_size); @@ -3326,11 +3327,14 @@ static void bnx2x_set_pbd_gso(struct sk_buff *skb, ip_hdr(skb)->daddr, 0, IPPROTO_TCP, 0)); - } else + /* GSO on 57710/57711 needs FW to calculate IP checksum */ + tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_IP_CSUM; + } else { pbd->tcp_pseudo_csum = bswab16(~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0)); + } pbd->global_data |= cpu_to_le16(ETH_TX_PARSE_BD_E1X_PSEUDO_CS_WITHOUT_LEN); @@ -3814,7 +3818,8 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) bnx2x_set_pbd_gso_e2(skb, &pbd_e2_parsing_data, xmit_type); else - bnx2x_set_pbd_gso(skb, pbd_e1x, xmit_type); + bnx2x_set_pbd_gso(skb, pbd_e1x, tx_start_bd, + xmit_type); } /* Set the PBD's parsing_data field if not zero -- cgit v1.2.3 From 917cc4e6b25c655264e8ea903eb77db25994ac24 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 19 May 2013 20:44:27 -0700 Subject: MAINTAINERS: Add myself as maintainer for LM95234 and TMP401 drivers I wrote the LM95234 driver and extended the TMP401 driver substantially, and I have hardware to test both, so it makes sense to explicitly maintain them. Signed-off-by: Guenter Roeck Acked-by: Jean Delvare --- MAINTAINERS | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 3d7782b9f90d..f0f3d20e51bb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4976,6 +4976,13 @@ S: Maintained F: Documentation/hwmon/lm90 F: drivers/hwmon/lm90.c +LM95234 HARDWARE MONITOR DRIVER +M: Guenter Roeck +L: lm-sensors@lm-sensors.org +S: Maintained +F: Documentation/hwmon/lm95234 +F: drivers/hwmon/lm95234.c + LME2510 MEDIA DRIVER M: Malcolm Priestley L: linux-media@vger.kernel.org @@ -8182,6 +8189,13 @@ F: drivers/mmc/host/sh_mobile_sdhi.c F: include/linux/mmc/tmio.h F: include/linux/mmc/sh_mobile_sdhi.h +TMP401 HARDWARE MONITOR DRIVER +M: Guenter Roeck +L: lm-sensors@lm-sensors.org +S: Maintained +F: Documentation/hwmon/tmp401 +F: drivers/hwmon/tmp401.c + TMPFS (SHMEM FILESYSTEM) M: Hugh Dickins L: linux-mm@kvack.org -- cgit v1.2.3 From 6ab7631014d0648e916f674c4bce0518739a2142 Mon Sep 17 00:00:00 2001 From: Niels Ole Salscheider Date: Tue, 14 May 2013 22:27:26 +0200 Subject: drm/radeon: Remove superfluous variable bool in_mode_set from struct radeon_crtc is not used anymore. Signed-off-by: Niels Ole Salscheider Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/atombios_crtc.c | 6 ------ drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 4 ---- drivers/gpu/drm/radeon/radeon_mode.h | 1 - 3 files changed, 11 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 6d6fdb3ba0d0..d5df8fd10217 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1811,12 +1811,9 @@ static bool atombios_crtc_mode_fixup(struct drm_crtc *crtc, static void atombios_crtc_prepare(struct drm_crtc *crtc) { - struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; - radeon_crtc->in_mode_set = true; - /* disable crtc pair power gating before programming */ if (ASIC_IS_DCE6(rdev)) atombios_powergate_crtc(crtc, ATOM_DISABLE); @@ -1827,11 +1824,8 @@ static void atombios_crtc_prepare(struct drm_crtc *crtc) static void atombios_crtc_commit(struct drm_crtc *crtc) { - struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); - atombios_crtc_dpms(crtc, DRM_MODE_DPMS_ON); atombios_lock_crtc(crtc, ATOM_DISABLE); - radeon_crtc->in_mode_set = false; } static void atombios_crtc_disable(struct drm_crtc *crtc) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index 6857cb4efb76..7cb178a34a0f 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -1031,11 +1031,9 @@ static int radeon_crtc_mode_set(struct drm_crtc *crtc, static void radeon_crtc_prepare(struct drm_crtc *crtc) { - struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct drm_crtc *crtci; - radeon_crtc->in_mode_set = true; /* * The hardware wedges sometimes if you reconfigure one CRTC * whilst another is running (see fdo bug #24611). @@ -1046,7 +1044,6 @@ static void radeon_crtc_prepare(struct drm_crtc *crtc) static void radeon_crtc_commit(struct drm_crtc *crtc) { - struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct drm_crtc *crtci; @@ -1057,7 +1054,6 @@ static void radeon_crtc_commit(struct drm_crtc *crtc) if (crtci->enabled) radeon_crtc_dpms(crtci, DRM_MODE_DPMS_ON); } - radeon_crtc->in_mode_set = false; } static const struct drm_crtc_helper_funcs legacy_helper_funcs = { diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 44e579e75fd0..69ad4fe224c1 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -302,7 +302,6 @@ struct radeon_crtc { u16 lut_r[256], lut_g[256], lut_b[256]; bool enabled; bool can_tile; - bool in_mode_set; uint32_t crtc_offset; struct drm_gem_object *cursor_bo; uint64_t cursor_addr; -- cgit v1.2.3 From fc986034540102cd090237bf3f70262e1ae80d9c Mon Sep 17 00:00:00 2001 From: Niels Ole Salscheider Date: Sat, 18 May 2013 21:19:23 +0200 Subject: drm/radeon: Fix VRAM size calculation for VRAM >= 4GB Add ULL prefix to avoid overflow. Signed-off-by: Niels Ole Salscheider Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/evergreen.c | 4 ++-- drivers/gpu/drm/radeon/radeon_ttm.c | 2 +- drivers/gpu/drm/radeon/si.c | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 105bafb6c29d..06c261bed289 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -3405,8 +3405,8 @@ int evergreen_mc_init(struct radeon_device *rdev) rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE); } else { /* size in MB on evergreen/cayman/tn */ - rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024; - rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024; + rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024ULL * 1024ULL; + rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024ULL * 1024ULL; } rdev->mc.visible_vram_size = rdev->mc.aper_size; r700_vram_gtt_location(rdev, &rdev->mc); diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index 93f760e27a92..6c0ce8915fac 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -726,7 +726,7 @@ int radeon_ttm_init(struct radeon_device *rdev) return r; } DRM_INFO("radeon: %uM of VRAM memory ready\n", - (unsigned)rdev->mc.real_vram_size / (1024 * 1024)); + (unsigned) (rdev->mc.real_vram_size / (1024 * 1024))); r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_TT, rdev->mc.gtt_size >> PAGE_SHIFT); if (r) { diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index f0b6c2f87c4d..113ed9f1f0d1 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -3397,8 +3397,8 @@ static int si_mc_init(struct radeon_device *rdev) rdev->mc.aper_base = pci_resource_start(rdev->pdev, 0); rdev->mc.aper_size = pci_resource_len(rdev->pdev, 0); /* size in MB on si */ - rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024; - rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024; + rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024ULL * 1024ULL; + rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024ULL * 1024ULL; rdev->mc.visible_vram_size = rdev->mc.aper_size; si_vram_gtt_location(rdev, &rdev->mc); radeon_update_bandwidth_info(rdev); -- cgit v1.2.3 From 731da21b7b205efb388481f7a9731c4c1ca3b48c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 13 May 2013 11:35:26 -0400 Subject: drm/radeon/dce2: use 10khz units for audio dto calculation Avoids overflows on DCE2.x devices. Also clarify the calculation on other asics. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/evergreen_hdmi.c | 7 +++---- drivers/gpu/drm/radeon/r600_hdmi.c | 9 ++++----- 2 files changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c index b4ab8ceb1654..ed7c8a768092 100644 --- a/drivers/gpu/drm/radeon/evergreen_hdmi.c +++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c @@ -154,19 +154,18 @@ static void evergreen_audio_set_dto(struct drm_encoder *encoder, u32 clock) struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc); - u32 base_rate = 48000; + u32 base_rate = 24000; if (!dig || !dig->afmt) return; - /* XXX: properly calculate this */ /* XXX two dtos; generally use dto0 for hdmi */ /* Express [24MHz / target pixel clock] as an exact rational * number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE * is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator */ - WREG32(DCCG_AUDIO_DTO0_PHASE, (base_rate*50) & 0xffffff); - WREG32(DCCG_AUDIO_DTO0_MODULE, (clock*100) & 0xffffff); + WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100); + WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100); WREG32(DCCG_AUDIO_DTO_SOURCE, DCCG_AUDIO_DTO0_SOURCE_SEL(radeon_crtc->crtc_id)); } diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index 47f180a79352..456750a0daa5 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -232,7 +232,7 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock) struct radeon_device *rdev = dev->dev_private; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; - u32 base_rate = 48000; + u32 base_rate = 24000; if (!dig || !dig->afmt) return; @@ -240,7 +240,6 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock) /* there are two DTOs selected by DCCG_AUDIO_DTO_SELECT. * doesn't matter which one you use. Just use the first one. */ - /* XXX: properly calculate this */ /* XXX two dtos; generally use dto0 for hdmi */ /* Express [24MHz / target pixel clock] as an exact rational * number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE @@ -250,13 +249,13 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock) /* according to the reg specs, this should DCE3.2 only, but in * practice it seems to cover DCE3.0 as well. */ - WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 50); + WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100); WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100); WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */ } else { /* according to the reg specs, this should be DCE2.0 and DCE3.0 */ - WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate * 50) | - AUDIO_DTO_MODULE(clock * 100)); + WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate / 10) | + AUDIO_DTO_MODULE(clock / 10)); } } -- cgit v1.2.3 From b5d9d72624b3591e4745422bd93399f9f158fb9e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 26 Jul 2012 18:53:55 -0400 Subject: drm/radeon: add chip family for Hainan MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Alex Deucher Reviewed-by: Christian König --- drivers/gpu/drm/radeon/radeon.h | 1 + drivers/gpu/drm/radeon/radeon_device.c | 1 + drivers/gpu/drm/radeon/radeon_family.h | 1 + 3 files changed, 3 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 1442ce765d48..ec26d686eb7c 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1838,6 +1838,7 @@ void r100_pll_errata_after_index(struct radeon_device *rdev); #define ASIC_IS_DCE61(rdev) ((rdev->family >= CHIP_ARUBA) && \ (rdev->flags & RADEON_IS_IGP)) #define ASIC_IS_DCE64(rdev) ((rdev->family == CHIP_OLAND)) +#define ASIC_IS_NODCE(rdev) ((rdev->family == CHIP_HAINAN)) /* * BIOS helpers. diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index a8f608903989..c2c59fb1ea01 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -94,6 +94,7 @@ static const char radeon_family_name[][16] = { "PITCAIRN", "VERDE", "OLAND", + "HAINAN", "LAST", }; diff --git a/drivers/gpu/drm/radeon/radeon_family.h b/drivers/gpu/drm/radeon/radeon_family.h index 2d91123f2759..36e9803b077d 100644 --- a/drivers/gpu/drm/radeon/radeon_family.h +++ b/drivers/gpu/drm/radeon/radeon_family.h @@ -92,6 +92,7 @@ enum radeon_family { CHIP_PITCAIRN, CHIP_VERDE, CHIP_OLAND, + CHIP_HAINAN, CHIP_LAST, }; -- cgit v1.2.3 From 8b02859d771e0f2800b841c4c7eb17f3a7852b88 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 31 Jul 2012 12:42:48 -0400 Subject: drm/radeon: fill in GPU init for Hainan (v2) v2: fix gb_addr_config value Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/si.c | 20 +++++++++++++++++++- drivers/gpu/drm/radeon/sid.h | 1 + 2 files changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 113ed9f1f0d1..1d8c61518ff6 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2003,7 +2003,8 @@ static void si_tiling_mode_table_init(struct radeon_device *rdev) WREG32(GB_TILE_MODE0 + (reg_offset * 4), gb_tile_moden); } } else if ((rdev->family == CHIP_VERDE) || - (rdev->family == CHIP_OLAND)) { + (rdev->family == CHIP_OLAND) || + (rdev->family == CHIP_HAINAN)) { for (reg_offset = 0; reg_offset < num_tile_mode_states; reg_offset++) { switch (reg_offset) { case 0: /* non-AA compressed depth or any compressed stencil */ @@ -2466,6 +2467,23 @@ static void si_gpu_init(struct radeon_device *rdev) rdev->config.si.sc_earlyz_tile_fifo_size = 0x130; gb_addr_config = VERDE_GB_ADDR_CONFIG_GOLDEN; break; + case CHIP_HAINAN: + rdev->config.si.max_shader_engines = 1; + rdev->config.si.max_tile_pipes = 4; + rdev->config.si.max_cu_per_sh = 5; + rdev->config.si.max_sh_per_se = 1; + rdev->config.si.max_backends_per_se = 1; + rdev->config.si.max_texture_channel_caches = 2; + rdev->config.si.max_gprs = 256; + rdev->config.si.max_gs_threads = 16; + rdev->config.si.max_hw_contexts = 8; + + rdev->config.si.sc_prim_fifo_size_frontend = 0x20; + rdev->config.si.sc_prim_fifo_size_backend = 0x40; + rdev->config.si.sc_hiz_tile_fifo_size = 0x30; + rdev->config.si.sc_earlyz_tile_fifo_size = 0x130; + gb_addr_config = HAINAN_GB_ADDR_CONFIG_GOLDEN; + break; } /* Initialize HDP */ diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h index 222877ba6cf5..8f2d7d4f9b28 100644 --- a/drivers/gpu/drm/radeon/sid.h +++ b/drivers/gpu/drm/radeon/sid.h @@ -28,6 +28,7 @@ #define TAHITI_GB_ADDR_CONFIG_GOLDEN 0x12011003 #define VERDE_GB_ADDR_CONFIG_GOLDEN 0x12010002 +#define HAINAN_GB_ADDR_CONFIG_GOLDEN 0x02010001 /* discrete uvd clocks */ #define CG_UPLL_FUNC_CNTL 0x634 -- cgit v1.2.3 From 8bb3e55103b37869175333e00fc01b34b0459529 Mon Sep 17 00:00:00 2001 From: Dan Magenheimer Date: Mon, 20 May 2013 07:52:17 -0700 Subject: staging: ramster: add how-to document Add how-to documentation that provides a step-by-step guide for configuring and trying out a ramster cluster. Signed-off-by: Dan Magenheimer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zcache/ramster/ramster-howto.txt | 366 +++++++++++++++++++++++ 1 file changed, 366 insertions(+) create mode 100644 drivers/staging/zcache/ramster/ramster-howto.txt diff --git a/drivers/staging/zcache/ramster/ramster-howto.txt b/drivers/staging/zcache/ramster/ramster-howto.txt new file mode 100644 index 000000000000..7b1ee3bbfdd5 --- /dev/null +++ b/drivers/staging/zcache/ramster/ramster-howto.txt @@ -0,0 +1,366 @@ + RAMSTER HOW-TO + +Author: Dan Magenheimer +Ramster maintainer: Konrad Wilk + +This is a HOWTO document for ramster which, as of this writing, is in +the kernel as a subdirectory of zcache in drivers/staging, called ramster. +(Zcache can be built with or without ramster functionality.) If enabled +and properly configured, ramster allows memory capacity load balancing +across multiple machines in a cluster. Further, the ramster code serves +as an example of asynchronous access for zcache (as well as cleancache and +frontswap) that may prove useful for future transcendent memory +implementations, such as KVM and NVRAM. While ramster works today on +any network connection that supports kernel sockets, its features may +become more interesting on future high-speed fabrics/interconnects. + +Ramster requires both kernel and userland support. The userland support, +called ramster-tools, is known to work with EL6-based distros, but is a +set of poorly-hacked slightly-modified cluster tools based on ocfs2, which +includes an init file, a config file, and a userland binary that interfaces +to the kernel. This state of userland support reflects the abysmal userland +skills of this suitably-embarrassed author; any help/patches to turn +ramster-tools into more distributable rpms/debs useful for a wider range +of distros would be appreciated. The source RPM that can be used as a +starting point is available at: + http://oss.oracle.com/projects/tmem/files/RAMster/ + +As a result of this author's ignorance, userland setup described in this +HOWTO assumes an EL6 distro and is described in EL6 syntax. Apologies +if this offends anyone! + +Kernel support has only been tested on x86_64. Systems with an active +ocfs2 filesystem should work, but since ramster leverages a lot of +code from ocfs2, there may be latent issues. A kernel configuration that +includes CONFIG_OCFS2_FS should build OK, and should certainly run OK +if no ocfs2 filesystem is mounted. + +This HOWTO demonstrates memory capacity load balancing for a two-node +cluster, where one node called the "local" node becomes overcommitted +and the other node called the "remote" node provides additional RAM +capacity for use by the local node. Ramster is capable of more complex +topologies; see the last section titled "ADVANCED RAMSTER TOPOLOGIES". + +If you find any terms in this HOWTO unfamiliar or don't understand the +motivation for ramster, the following LWN reading is recommended: +-- Transcendent Memory in a Nutshell (lwn.net/Articles/454795) +-- The future calculus of memory management (lwn.net/Articles/475681) +And since ramster is built on top of zcache, this article may be helpful: +-- In-kernel memory compression (lwn.net/Articles/545244) + +Now that you've memorized the contents of those articles, let's get started! + +A. PRELIMINARY + +1) Install two x86_64 Linux systems that are known to work when + upgraded to a recent upstream Linux kernel version. + +On each system: + +2) Configure, build and install, then boot Linux, just to ensure it + can be done with an unmodified upstream kernel. Confirm you booted + the upstream kernel with "uname -a". + +3) If you plan to do any performance testing or unless you plan to + test only swapping, the "WasActive" patch is also highly recommended. + (Search lkml.org for WasActive, apply the patch, rebuild your kernel.) + For a demo or simple testing, the patch can be ignored. + +4) Install ramster-tools as root. An x86_64 rpm for EL6-based systems + can be found at: + http://oss.oracle.com/projects/tmem/files/RAMster/ + (Sorry but for now, non-EL6 users must recreate ramster-tools on + their own from source. See above.) + +5) Ensure that debugfs is mounted at each boot. Examples below assume it + is mounted at /sys/kernel/debug. + +B. BUILDING RAMSTER INTO THE KERNEL + +Do the following on each system: + +1) Using the kernel configuration mechanism of your choice, change + your config to include: + + CONFIG_CLEANCACHE=y + CONFIG_FRONTSWAP=y + CONFIG_STAGING=y + CONFIG_CONFIGFS_FS=y # NOTE: MUST BE y, not m + CONFIG_ZCACHE=y + CONFIG_RAMSTER=y + + For a linux-3.10 or later kernel, you should also set: + + CONFIG_ZCACHE_DEBUG=y + CONFIG_RAMSTER_DEBUG=y + + Before building the kernel please doublecheck your kernel config + file to ensure all of the settings are correct. + +2) Build this kernel and change your boot file (e.g. /etc/grub.conf) + so that the new kernel will boot. + +3) Add "zcache" and "ramster" as kernel boot parameters for the new kernel. + +4) Reboot each system approximately simultaneously. + +5) Check dmesg to ensure there are some messages from ramster, prefixed + by "ramster:" + + # dmesg | grep ramster + + You should also see a lot of files in: + + # ls /sys/kernel/debug/zcache + # ls /sys/kernel/debug/ramster + + These are mostly counters for various zcache and ramster activities. + You should also see files in: + + # ls /sys/kernel/mm/ramster + + These are sysfs files that control ramster as we shall see. + + Ramster now will act as a single-system zcache on each system + but doesn't yet know anything about the cluster so can't yet do + anything remotely. + +C. CONFIGURING THE RAMSTER CLUSTER + +This part can be error prone unless you are familiar with clustering +filesystems. We need to describe the cluster in a /etc/ramster.conf +file and the init scripts that parse it are extremely picky about +the syntax. + +1) Create a /etc/ramster.conf file and ensure it is identical on both + systems. This file mimics the ocfs2 format and there is a good amount + of documentation that can be searched for ocfs2.conf, but you can use: + + cluster: + name = ramster + node_count = 2 + node: + name = system1 + cluster = ramster + number = 0 + ip_address = my.ip.ad.r1 + ip_port = 7777 + node: + name = system2 + cluster = ramster + number = 1 + ip_address = my.ip.ad.r2 + ip_port = 7777 + + You must ensure that the "name" field in the file exactly matches + the output of "hostname" on each system; if "hostname" shows a + fully-qualified hostname, ensure the name is fully qualified in + /etc/ramster.conf. Obviously, substitute my.ip.ad.rx with proper + ip addresses. + +2) Enable the ramster service and configure it. If you used the + EL6 ramster-tools, this would be: + + # chkconfig --add ramster + # service ramster configure + + Set "load on boot" to "y", cluster to start is "ramster" (or whatever + name you chose in ramster.conf), heartbeat dead threshold as "500", + network idle timeout as "1000000". Leave the others as default. + +3) Reboot both systems. After reboot, try (assuming EL6 ramster-tools): + + # service ramster status + + You should see "Checking RAMSTER cluster "ramster": Online". If you do + not, something is wrong and ramster will not work. Note that you + should also see that the driver for "configfs" is loaded and mounted, + the driver for ocfs2_dlmfs is not loaded, and some numbers for network + parameters. You will also see "Checking RAMSTER heartbeat: Not active". + That's all OK. + +4) Now you need to start the cluster heartbeat; the cluster is not "up" + until all nodes detect a heartbeat. In a real cluster, heartbeat detection + is done via a cluster filesystem, but ramster doesn't require one. Some + hack-y kernel code in ramster can start the heartbeat for you though if + you tell it what nodes are "up". To enable the heartbeat, do: + + # echo 0 > /sys/kernel/mm/ramster/manual_node_up + # echo 1 > /sys/kernel/mm/ramster/manual_node_up + + This must be done on BOTH nodes and, to avoid timeouts, must be done + approximately concurrently on both nodes. On an EL6 system, it is + convenient to put these lines in /etc/rc.local. To confirm that the + cluster is now up, on both systems do: + + # dmesg | grep ramster + + You should see ramster "Accepted connection" messages in dmesg on both + nodes after this. Note that if you check userland status again with + + # service ramster status + + you will still see "Checking RAMSTER heartbeat: Not active". That's + still OK... the ramster kernel heartbeat hack doesn't communicate to + userland. + +5) You now must tell each node the node to which it should "remotify" pages. + On this two node cluster, we will assume the "local" node, node 0, has + memory overcommitted and will use ramster to utilize RAM capacity on + the "remote node", node 1. To configure this, on node 0, you do: + + # echo 1 > /sys/kernel/mm/ramster/remote_target_nodenum + + You should see "ramster: node 1 set as remotification target" in dmesg + on node 0. Again, on EL6, /etc/rc.local is a good place to put this + on node 0 so you don't forget to do it at each boot. + +6) One more step: By default, the ramster code does not "remotify" any + pages; this is primarily for testing purposes, but sometimes it is + useful. This may change in the future, but for now, on node 0, you do: + + # echo 1 > /sys/kernel/mm/ramster/pers_remotify_enable + # echo 1 > /sys/kernel/mm/ramster/eph_remotify_enable + + The first enables remotifying swap (persistent, aka frontswap) pages, + the second enables remotifying of page cache (ephemeral, cleancache) + pages. + + On EL6, these lines can also be put in /etc/rc.local (AFTER the + node_up lines), or at the beginning of a script that runs a workload. + +7) Note that most testing has been done with both/all machines booted + roughly simultaneously to avoid cluster timeouts. Ideally, you should + do this too unless you are trying to break ramster rather than just + use it. ;-) + +D. TESTING RAMSTER + +1) Note that ramster has no value unless pages get "remotified". For + swap/frontswap/persistent pages, this doesn't happen unless/until + the workload would cause swapping to occur, at which point pages + are put into frontswap/zcache, and the remotification thread starts + working. To get to the point where the system swaps, you either + need a workload for which the working set exceeds the RAM in the + system; or you need to somehow reduce the amount of RAM one of + the system sees. This latter is easy when testing in a VM, but + harder on physical systems. In some cases, "mem=xxxM" on the + kernel command line restricts memory, but for some values of xxx + the kernel may fail to boot. One may also try creating a fixed + RAMdisk, doing nothing with it, but ensuring that it eats up a fixed + amount of RAM. + +2) To see if ramster is working, on the "remote node", node 1, try: + + # grep . /sys/kernel/debug/ramster/foreign_* + # # note, that is space-dot-space between grep and the pathname + + to monitor the number (and max) ephemeral and persistent pages + that ramster has sent. If these stay at zero, ramster is not working + either because the workload on the local node (node 0) isn't creating + enough memory pressure or because "remotifying" isn't working. On the + local system, node 0, you can watch lots of useful information also. + Try: + + grep . /sys/kernel/debug/zcache/*pageframes* \ + /sys/kernel/debug/zcache/*zbytes* \ + /sys/kernel/debug/zcache/*zpages* \ + /sys/kernel/debug/ramster/*remote* + + Of particular note are the remote_*_pages_succ_get counters. These + show how many disk reads and/or disk writes have been avoided on the + overcommitted local system by storing pages remotely using ramster. + + At the risk of information overload, you can also grep: + + /sys/kernel/debug/cleancache/* and /sys/kernel/debug/frontswap/* + + These show, for example, how many disk reads and/or disk writes have + been avoided by using zcache to optimize RAM on the local system. + + +AUTOMATIC SWAP REPATRIATION + +You may notice that while the systems are idle, the foreign persistent +page count on the remote machine slowly decreases. This is because +ramster implements "frontswap selfshrinking": When possible, swap +pages that have been remotified are slowly repatriated to the local +machine. This is so that local RAM can be used when possible and +so that, in case of remote machine crash, the probability of loss +of data is reduced. + +REBOOTING / POWEROFF + +If a system is shut down while some of its swap pages still reside +on a remote system, the system may lock up during the shutdown +sequence. This will occur if the network is shut down before the +swap mechansim is shut down, which is the default ordering on many +distros. To avoid this annoying problem, simply shut off the swap +subsystem before starting the shutdown sequence, e.g.: + + # swapoff -a + # reboot + +Ideally, this swapoff-before-ifdown ordering should be enforced permanently +using shutdown scripts. + +KNOWN PROBLEMS + +1) You may periodically see messages such as: + + ramster_r2net, message length problem + + This is harmless but indicates that a node is sending messages + containing compressed pages that exceed the maximum for zcache + (PAGE_SIZE*15/16). The sender side needs to be fixed. + +2) If you see a "No longer connected to node..." message or a "No connection + established with node X after N seconds", it is possible you may + be in an unrecoverable state. If you are certain all of the + appropriate cluster configuration steps described above have been + performed, try rebooting the two servers concurrently to see if + the cluster starts. + + Note that "Connection to node... shutdown, state 7" is an intermediate + connection state. As long as you later see "Accepted connection", the + intermediate states are harmless. + +3) There are known issues in counting certain values. As a result + you may see periodic warnings from the kernel. Almost always you + will see "ramster: bad accounting for XXX". There are also "WARN_ONCE" + messages. If you see kernel warnings with a tombstone, please report + them. They are harmless but reflect bugs that need to be eventually fixed. + +ADVANCED RAMSTER TOPOLOGIES + +The kernel code for ramster can support up to eight nodes in a cluster, +but no testing has been done with more than three nodes. + +In the example described above, the "remote" node serves as a RAM +overflow for the "local" node. This can be made symmetric by appropriate +settings of the sysfs remote_target_nodenum file. For example, by setting: + + # echo 1 > /sys/kernel/mm/ramster/remote_target_nodenum + +on node 0, and + + # echo 0 > /sys/kernel/mm/ramster/remote_target_nodenum + +on node 1, each node can serve as a RAM overflow for the other. + +For more than two nodes, a "RAM server" can be configured. For a +three node system, set: + + # echo 0 > /sys/kernel/mm/ramster/remote_target_nodenum + +on node 1, and + + # echo 0 > /sys/kernel/mm/ramster/remote_target_nodenum + +on node 2. Then node 0 is a RAM server for node 1 and node 2. + +In this implementation of ramster, any remote node is potentially a single +point of failure (SPOF). Though the probability of failure is reduced +by automatic swap repatriation (see above), a proposed future enhancement +to ramster improves high-availability for the cluster by sending a copy +of each page of date to two other nodes. Patches welcome! -- cgit v1.2.3 From 5153550ad7e1d8e7344aded830258d5be7292989 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 30 Aug 2012 14:34:30 -0400 Subject: drm/radeon: don't touch DCE or VGA regs on Hainan (v3) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Hainan has no display hardware: - no DCE (crtc, uniphy, dac, etc.) - no VGA v2: fix bios fetch v3: fix interrupts Signed-off-by: Alex Deucher Reviewed-by: Christian König --- drivers/gpu/drm/radeon/evergreen.c | 27 ++++++---- drivers/gpu/drm/radeon/radeon_bios.c | 28 +++++----- drivers/gpu/drm/radeon/si.c | 99 +++++++++++++++++++++--------------- 3 files changed, 92 insertions(+), 62 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 06c261bed289..8f9e2d31b255 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -2343,11 +2343,13 @@ void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *sav u32 crtc_enabled, tmp, frame_count, blackout; int i, j; - save->vga_render_control = RREG32(VGA_RENDER_CONTROL); - save->vga_hdp_control = RREG32(VGA_HDP_CONTROL); + if (!ASIC_IS_NODCE(rdev)) { + save->vga_render_control = RREG32(VGA_RENDER_CONTROL); + save->vga_hdp_control = RREG32(VGA_HDP_CONTROL); - /* disable VGA render */ - WREG32(VGA_RENDER_CONTROL, 0); + /* disable VGA render */ + WREG32(VGA_RENDER_CONTROL, 0); + } /* blank the display controllers */ for (i = 0; i < rdev->num_crtc; i++) { crtc_enabled = RREG32(EVERGREEN_CRTC_CONTROL + crtc_offsets[i]) & EVERGREEN_CRTC_MASTER_EN; @@ -2438,8 +2440,11 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS + crtc_offsets[i], (u32)rdev->mc.vram_start); } - WREG32(EVERGREEN_VGA_MEMORY_BASE_ADDRESS_HIGH, upper_32_bits(rdev->mc.vram_start)); - WREG32(EVERGREEN_VGA_MEMORY_BASE_ADDRESS, (u32)rdev->mc.vram_start); + + if (!ASIC_IS_NODCE(rdev)) { + WREG32(EVERGREEN_VGA_MEMORY_BASE_ADDRESS_HIGH, upper_32_bits(rdev->mc.vram_start)); + WREG32(EVERGREEN_VGA_MEMORY_BASE_ADDRESS, (u32)rdev->mc.vram_start); + } /* unlock regs and wait for update */ for (i = 0; i < rdev->num_crtc; i++) { @@ -2499,10 +2504,12 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s } } } - /* Unlock vga access */ - WREG32(VGA_HDP_CONTROL, save->vga_hdp_control); - mdelay(1); - WREG32(VGA_RENDER_CONTROL, save->vga_render_control); + if (!ASIC_IS_NODCE(rdev)) { + /* Unlock vga access */ + WREG32(VGA_HDP_CONTROL, save->vga_hdp_control); + mdelay(1); + WREG32(VGA_RENDER_CONTROL, save->vga_render_control); + } } void evergreen_mc_program(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index b8015913d382..9448cbfd5763 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -221,24 +221,28 @@ static bool ni_read_disabled_bios(struct radeon_device *rdev) /* enable the rom */ WREG32(R600_BUS_CNTL, (bus_cntl & ~R600_BIOS_ROM_DIS)); - /* Disable VGA mode */ - WREG32(AVIVO_D1VGA_CONTROL, - (d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE | - AVIVO_DVGA_CONTROL_TIMING_SELECT))); - WREG32(AVIVO_D2VGA_CONTROL, - (d2vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE | - AVIVO_DVGA_CONTROL_TIMING_SELECT))); - WREG32(AVIVO_VGA_RENDER_CONTROL, - (vga_render_control & ~AVIVO_VGA_VSTATUS_CNTL_MASK)); + if (!ASIC_IS_NODCE(rdev)) { + /* Disable VGA mode */ + WREG32(AVIVO_D1VGA_CONTROL, + (d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE | + AVIVO_DVGA_CONTROL_TIMING_SELECT))); + WREG32(AVIVO_D2VGA_CONTROL, + (d2vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE | + AVIVO_DVGA_CONTROL_TIMING_SELECT))); + WREG32(AVIVO_VGA_RENDER_CONTROL, + (vga_render_control & ~AVIVO_VGA_VSTATUS_CNTL_MASK)); + } WREG32(R600_ROM_CNTL, rom_cntl | R600_SCK_OVERWRITE); r = radeon_read_bios(rdev); /* restore regs */ WREG32(R600_BUS_CNTL, bus_cntl); - WREG32(AVIVO_D1VGA_CONTROL, d1vga_control); - WREG32(AVIVO_D2VGA_CONTROL, d2vga_control); - WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control); + if (!ASIC_IS_NODCE(rdev)) { + WREG32(AVIVO_D1VGA_CONTROL, d1vga_control); + WREG32(AVIVO_D2VGA_CONTROL, d2vga_control); + WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control); + } WREG32(R600_ROM_CNTL, rom_cntl); return r; } diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 1d8c61518ff6..14472cca75ba 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -3322,8 +3322,9 @@ static void si_mc_program(struct radeon_device *rdev) if (radeon_mc_wait_for_idle(rdev)) { dev_warn(rdev->dev, "Wait for MC idle timedout !\n"); } - /* Lockout access through VGA aperture*/ - WREG32(VGA_HDP_CONTROL, VGA_MEMORY_DISABLE); + if (!ASIC_IS_NODCE(rdev)) + /* Lockout access through VGA aperture*/ + WREG32(VGA_HDP_CONTROL, VGA_MEMORY_DISABLE); /* Update configuration */ WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR, rdev->mc.vram_start >> 12); @@ -3345,9 +3346,11 @@ static void si_mc_program(struct radeon_device *rdev) dev_warn(rdev->dev, "Wait for MC idle timedout !\n"); } evergreen_mc_resume(rdev, &save); - /* we need to own VRAM, so turn off the VGA renderer here - * to stop it overwriting our objects */ - rv515_vga_render_disable(rdev); + if (!ASIC_IS_NODCE(rdev)) { + /* we need to own VRAM, so turn off the VGA renderer here + * to stop it overwriting our objects */ + rv515_vga_render_disable(rdev); + } } static void si_vram_gtt_location(struct radeon_device *rdev, @@ -4269,8 +4272,10 @@ static void si_disable_interrupt_state(struct radeon_device *rdev) tmp = RREG32(DMA_CNTL + DMA1_REGISTER_OFFSET) & ~TRAP_ENABLE; WREG32(DMA_CNTL + DMA1_REGISTER_OFFSET, tmp); WREG32(GRBM_INT_CNTL, 0); - WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); - WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); + if (rdev->num_crtc >= 2) { + WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); + WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); + } if (rdev->num_crtc >= 4) { WREG32(INT_MASK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(INT_MASK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); @@ -4280,8 +4285,10 @@ static void si_disable_interrupt_state(struct radeon_device *rdev) WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); + if (rdev->num_crtc >= 2) { + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); + } if (rdev->num_crtc >= 4) { WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); @@ -4291,21 +4298,22 @@ static void si_disable_interrupt_state(struct radeon_device *rdev) WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } - WREG32(DACA_AUTODETECT_INT_CONTROL, 0); - - tmp = RREG32(DC_HPD1_INT_CONTROL) & DC_HPDx_INT_POLARITY; - WREG32(DC_HPD1_INT_CONTROL, tmp); - tmp = RREG32(DC_HPD2_INT_CONTROL) & DC_HPDx_INT_POLARITY; - WREG32(DC_HPD2_INT_CONTROL, tmp); - tmp = RREG32(DC_HPD3_INT_CONTROL) & DC_HPDx_INT_POLARITY; - WREG32(DC_HPD3_INT_CONTROL, tmp); - tmp = RREG32(DC_HPD4_INT_CONTROL) & DC_HPDx_INT_POLARITY; - WREG32(DC_HPD4_INT_CONTROL, tmp); - tmp = RREG32(DC_HPD5_INT_CONTROL) & DC_HPDx_INT_POLARITY; - WREG32(DC_HPD5_INT_CONTROL, tmp); - tmp = RREG32(DC_HPD6_INT_CONTROL) & DC_HPDx_INT_POLARITY; - WREG32(DC_HPD6_INT_CONTROL, tmp); + if (!ASIC_IS_NODCE(rdev)) { + WREG32(DACA_AUTODETECT_INT_CONTROL, 0); + tmp = RREG32(DC_HPD1_INT_CONTROL) & DC_HPDx_INT_POLARITY; + WREG32(DC_HPD1_INT_CONTROL, tmp); + tmp = RREG32(DC_HPD2_INT_CONTROL) & DC_HPDx_INT_POLARITY; + WREG32(DC_HPD2_INT_CONTROL, tmp); + tmp = RREG32(DC_HPD3_INT_CONTROL) & DC_HPDx_INT_POLARITY; + WREG32(DC_HPD3_INT_CONTROL, tmp); + tmp = RREG32(DC_HPD4_INT_CONTROL) & DC_HPDx_INT_POLARITY; + WREG32(DC_HPD4_INT_CONTROL, tmp); + tmp = RREG32(DC_HPD5_INT_CONTROL) & DC_HPDx_INT_POLARITY; + WREG32(DC_HPD5_INT_CONTROL, tmp); + tmp = RREG32(DC_HPD6_INT_CONTROL) & DC_HPDx_INT_POLARITY; + WREG32(DC_HPD6_INT_CONTROL, tmp); + } } static int si_irq_init(struct radeon_device *rdev) @@ -4384,7 +4392,7 @@ int si_irq_set(struct radeon_device *rdev) u32 cp_int_cntl = CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE; u32 cp_int_cntl1 = 0, cp_int_cntl2 = 0; u32 crtc1 = 0, crtc2 = 0, crtc3 = 0, crtc4 = 0, crtc5 = 0, crtc6 = 0; - u32 hpd1, hpd2, hpd3, hpd4, hpd5, hpd6; + u32 hpd1 = 0, hpd2 = 0, hpd3 = 0, hpd4 = 0, hpd5 = 0, hpd6 = 0; u32 grbm_int_cntl = 0; u32 grph1 = 0, grph2 = 0, grph3 = 0, grph4 = 0, grph5 = 0, grph6 = 0; u32 dma_cntl, dma_cntl1; @@ -4401,12 +4409,14 @@ int si_irq_set(struct radeon_device *rdev) return 0; } - hpd1 = RREG32(DC_HPD1_INT_CONTROL) & ~DC_HPDx_INT_EN; - hpd2 = RREG32(DC_HPD2_INT_CONTROL) & ~DC_HPDx_INT_EN; - hpd3 = RREG32(DC_HPD3_INT_CONTROL) & ~DC_HPDx_INT_EN; - hpd4 = RREG32(DC_HPD4_INT_CONTROL) & ~DC_HPDx_INT_EN; - hpd5 = RREG32(DC_HPD5_INT_CONTROL) & ~DC_HPDx_INT_EN; - hpd6 = RREG32(DC_HPD6_INT_CONTROL) & ~DC_HPDx_INT_EN; + if (!ASIC_IS_NODCE(rdev)) { + hpd1 = RREG32(DC_HPD1_INT_CONTROL) & ~DC_HPDx_INT_EN; + hpd2 = RREG32(DC_HPD2_INT_CONTROL) & ~DC_HPDx_INT_EN; + hpd3 = RREG32(DC_HPD3_INT_CONTROL) & ~DC_HPDx_INT_EN; + hpd4 = RREG32(DC_HPD4_INT_CONTROL) & ~DC_HPDx_INT_EN; + hpd5 = RREG32(DC_HPD5_INT_CONTROL) & ~DC_HPDx_INT_EN; + hpd6 = RREG32(DC_HPD6_INT_CONTROL) & ~DC_HPDx_INT_EN; + } dma_cntl = RREG32(DMA_CNTL + DMA0_REGISTER_OFFSET) & ~TRAP_ENABLE; dma_cntl1 = RREG32(DMA_CNTL + DMA1_REGISTER_OFFSET) & ~TRAP_ENABLE; @@ -4497,8 +4507,10 @@ int si_irq_set(struct radeon_device *rdev) WREG32(GRBM_INT_CNTL, grbm_int_cntl); - WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, crtc1); - WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, crtc2); + if (rdev->num_crtc >= 2) { + WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, crtc1); + WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, crtc2); + } if (rdev->num_crtc >= 4) { WREG32(INT_MASK + EVERGREEN_CRTC2_REGISTER_OFFSET, crtc3); WREG32(INT_MASK + EVERGREEN_CRTC3_REGISTER_OFFSET, crtc4); @@ -4508,8 +4520,10 @@ int si_irq_set(struct radeon_device *rdev) WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, crtc6); } - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, grph1); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, grph2); + if (rdev->num_crtc >= 2) { + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, grph1); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, grph2); + } if (rdev->num_crtc >= 4) { WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, grph3); WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, grph4); @@ -4519,12 +4533,14 @@ int si_irq_set(struct radeon_device *rdev) WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, grph6); } - WREG32(DC_HPD1_INT_CONTROL, hpd1); - WREG32(DC_HPD2_INT_CONTROL, hpd2); - WREG32(DC_HPD3_INT_CONTROL, hpd3); - WREG32(DC_HPD4_INT_CONTROL, hpd4); - WREG32(DC_HPD5_INT_CONTROL, hpd5); - WREG32(DC_HPD6_INT_CONTROL, hpd6); + if (!ASIC_IS_NODCE(rdev)) { + WREG32(DC_HPD1_INT_CONTROL, hpd1); + WREG32(DC_HPD2_INT_CONTROL, hpd2); + WREG32(DC_HPD3_INT_CONTROL, hpd3); + WREG32(DC_HPD4_INT_CONTROL, hpd4); + WREG32(DC_HPD5_INT_CONTROL, hpd5); + WREG32(DC_HPD6_INT_CONTROL, hpd6); + } return 0; } @@ -4533,6 +4549,9 @@ static inline void si_irq_ack(struct radeon_device *rdev) { u32 tmp; + if (ASIC_IS_NODCE(rdev)) + return; + rdev->irq.stat_regs.evergreen.disp_int = RREG32(DISP_INTERRUPT_STATUS); rdev->irq.stat_regs.evergreen.disp_int_cont = RREG32(DISP_INTERRUPT_STATUS_CONTINUE); rdev->irq.stat_regs.evergreen.disp_int_cont2 = RREG32(DISP_INTERRUPT_STATUS_CONTINUE2); -- cgit v1.2.3 From c04c00b4c74aab251ce4fd4757c955cc31ecc50d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 31 Jul 2012 12:57:45 -0400 Subject: drm/radeon: fill in ucode loading support for Hainan MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Alex Deucher Reviewed-by: Christian König --- drivers/gpu/drm/radeon/si.c | 58 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 14472cca75ba..2e0a08617f4a 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -60,6 +60,11 @@ MODULE_FIRMWARE("radeon/OLAND_me.bin"); MODULE_FIRMWARE("radeon/OLAND_ce.bin"); MODULE_FIRMWARE("radeon/OLAND_mc.bin"); MODULE_FIRMWARE("radeon/OLAND_rlc.bin"); +MODULE_FIRMWARE("radeon/HAINAN_pfp.bin"); +MODULE_FIRMWARE("radeon/HAINAN_me.bin"); +MODULE_FIRMWARE("radeon/HAINAN_ce.bin"); +MODULE_FIRMWARE("radeon/HAINAN_mc.bin"); +MODULE_FIRMWARE("radeon/HAINAN_rlc.bin"); extern int r600_ih_ring_alloc(struct radeon_device *rdev); extern void r600_ih_ring_fini(struct radeon_device *rdev); @@ -1062,6 +1067,45 @@ static const u32 oland_io_mc_regs[TAHITI_IO_MC_REGS_SIZE][2] = { {0x0000009f, 0x00a17730} }; +static const u32 hainan_io_mc_regs[TAHITI_IO_MC_REGS_SIZE][2] = { + {0x0000006f, 0x03044000}, + {0x00000070, 0x0480c018}, + {0x00000071, 0x00000040}, + {0x00000072, 0x01000000}, + {0x00000074, 0x000000ff}, + {0x00000075, 0x00143400}, + {0x00000076, 0x08ec0800}, + {0x00000077, 0x040000cc}, + {0x00000079, 0x00000000}, + {0x0000007a, 0x21000409}, + {0x0000007c, 0x00000000}, + {0x0000007d, 0xe8000000}, + {0x0000007e, 0x044408a8}, + {0x0000007f, 0x00000003}, + {0x00000080, 0x00000000}, + {0x00000081, 0x01000000}, + {0x00000082, 0x02000000}, + {0x00000083, 0x00000000}, + {0x00000084, 0xe3f3e4f4}, + {0x00000085, 0x00052024}, + {0x00000087, 0x00000000}, + {0x00000088, 0x66036603}, + {0x00000089, 0x01000000}, + {0x0000008b, 0x1c0a0000}, + {0x0000008c, 0xff010000}, + {0x0000008e, 0xffffefff}, + {0x0000008f, 0xfff3efff}, + {0x00000090, 0xfff3efbf}, + {0x00000094, 0x00101101}, + {0x00000095, 0x00000fff}, + {0x00000096, 0x00116fff}, + {0x00000097, 0x60010000}, + {0x00000098, 0x10010000}, + {0x00000099, 0x00006000}, + {0x0000009a, 0x00001000}, + {0x0000009f, 0x00a07730} +}; + /* ucode loading */ static int si_mc_load_microcode(struct radeon_device *rdev) { @@ -1095,6 +1139,11 @@ static int si_mc_load_microcode(struct radeon_device *rdev) ucode_size = OLAND_MC_UCODE_SIZE; regs_size = TAHITI_IO_MC_REGS_SIZE; break; + case CHIP_HAINAN: + io_mc_regs = (u32 *)&hainan_io_mc_regs; + ucode_size = OLAND_MC_UCODE_SIZE; + regs_size = TAHITI_IO_MC_REGS_SIZE; + break; } running = RREG32(MC_SEQ_SUP_CNTL) & RUN_MASK; @@ -1198,6 +1247,15 @@ static int si_init_microcode(struct radeon_device *rdev) rlc_req_size = SI_RLC_UCODE_SIZE * 4; mc_req_size = OLAND_MC_UCODE_SIZE * 4; break; + case CHIP_HAINAN: + chip_name = "HAINAN"; + rlc_chip_name = "HAINAN"; + pfp_req_size = SI_PFP_UCODE_SIZE * 4; + me_req_size = SI_PM4_UCODE_SIZE * 4; + ce_req_size = SI_CE_UCODE_SIZE * 4; + rlc_req_size = SI_RLC_UCODE_SIZE * 4; + mc_req_size = OLAND_MC_UCODE_SIZE * 4; + break; default: BUG(); } -- cgit v1.2.3 From 86a45cac3f86eb65bfdaa122acf1b9073f9e69b2 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 26 Jul 2012 19:04:20 -0400 Subject: drm/radeon: radeon-asic updates for Hainan MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Alex Deucher Reviewed-by: Christian König --- drivers/gpu/drm/radeon/radeon_asic.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c index 6417132c50cf..44a7a410141e 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.c +++ b/drivers/gpu/drm/radeon/radeon_asic.c @@ -2051,9 +2051,12 @@ int radeon_asic_init(struct radeon_device *rdev) case CHIP_PITCAIRN: case CHIP_VERDE: case CHIP_OLAND: + case CHIP_HAINAN: rdev->asic = &si_asic; /* set num crtcs */ - if (rdev->family == CHIP_OLAND) + if (rdev->family == CHIP_HAINAN) + rdev->num_crtc = 0; + else if (rdev->family == CHIP_OLAND) rdev->num_crtc = 2; else rdev->num_crtc = 6; -- cgit v1.2.3 From 948bee3ff41c226b5c8f7d4a78f5562473a09de6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 14 May 2013 12:08:35 -0400 Subject: drm/radeon: track which asics have UVD Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon.h | 1 + drivers/gpu/drm/radeon/radeon_asic.c | 17 +++++++++++++++++ 2 files changed, 18 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index ec26d686eb7c..142ce6cc69f5 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1694,6 +1694,7 @@ struct radeon_device { int num_crtc; /* number of crtcs */ struct mutex dc_hw_i2c_mutex; /* display controller hw i2c mutex */ bool audio_enabled; + bool has_uvd; struct r600_audio audio_status; /* audio stuff */ struct notifier_block acpi_nb; /* only one userspace can use Hyperz features or CMASK at a time */ diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c index 44a7a410141e..06b8c19ab19e 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.c +++ b/drivers/gpu/drm/radeon/radeon_asic.c @@ -1935,6 +1935,8 @@ int radeon_asic_init(struct radeon_device *rdev) else rdev->num_crtc = 2; + rdev->has_uvd = false; + switch (rdev->family) { case CHIP_R100: case CHIP_RV100: @@ -1999,16 +2001,22 @@ int radeon_asic_init(struct radeon_device *rdev) case CHIP_RV635: case CHIP_RV670: rdev->asic = &r600_asic; + if (rdev->family == CHIP_R600) + rdev->has_uvd = false; + else + rdev->has_uvd = true; break; case CHIP_RS780: case CHIP_RS880: rdev->asic = &rs780_asic; + rdev->has_uvd = true; break; case CHIP_RV770: case CHIP_RV730: case CHIP_RV710: case CHIP_RV740: rdev->asic = &rv770_asic; + rdev->has_uvd = true; break; case CHIP_CEDAR: case CHIP_REDWOOD: @@ -2021,11 +2029,13 @@ int radeon_asic_init(struct radeon_device *rdev) else rdev->num_crtc = 6; rdev->asic = &evergreen_asic; + rdev->has_uvd = true; break; case CHIP_PALM: case CHIP_SUMO: case CHIP_SUMO2: rdev->asic = &sumo_asic; + rdev->has_uvd = true; break; case CHIP_BARTS: case CHIP_TURKS: @@ -2036,16 +2046,19 @@ int radeon_asic_init(struct radeon_device *rdev) else rdev->num_crtc = 6; rdev->asic = &btc_asic; + rdev->has_uvd = true; break; case CHIP_CAYMAN: rdev->asic = &cayman_asic; /* set num crtcs */ rdev->num_crtc = 6; + rdev->has_uvd = true; break; case CHIP_ARUBA: rdev->asic = &trinity_asic; /* set num crtcs */ rdev->num_crtc = 4; + rdev->has_uvd = true; break; case CHIP_TAHITI: case CHIP_PITCAIRN: @@ -2060,6 +2073,10 @@ int radeon_asic_init(struct radeon_device *rdev) rdev->num_crtc = 2; else rdev->num_crtc = 6; + if (rdev->family == CHIP_HAINAN) + rdev->has_uvd = false; + else + rdev->has_uvd = true; break; default: /* FIXME: not supported yet */ -- cgit v1.2.3 From 1df0d523ddb8683e2d5ca1a50ca92f76f908ef20 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 26 Apr 2013 18:03:44 -0400 Subject: drm/radeon: sun/hainan chips do not have UVD (v2) Skip UVD handling on them. v2: split has_uvd tracking into separate patch Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/si.c | 67 ++++++++++++++++++++++++++------------------- 1 file changed, 39 insertions(+), 28 deletions(-) diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 2e0a08617f4a..d708fc9aa318 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2635,9 +2635,11 @@ static void si_gpu_init(struct radeon_device *rdev) WREG32(HDP_ADDR_CONFIG, gb_addr_config); WREG32(DMA_TILING_CONFIG + DMA0_REGISTER_OFFSET, gb_addr_config); WREG32(DMA_TILING_CONFIG + DMA1_REGISTER_OFFSET, gb_addr_config); - WREG32(UVD_UDEC_ADDR_CONFIG, gb_addr_config); - WREG32(UVD_UDEC_DB_ADDR_CONFIG, gb_addr_config); - WREG32(UVD_UDEC_DBW_ADDR_CONFIG, gb_addr_config); + if (rdev->has_uvd) { + WREG32(UVD_UDEC_ADDR_CONFIG, gb_addr_config); + WREG32(UVD_UDEC_DB_ADDR_CONFIG, gb_addr_config); + WREG32(UVD_UDEC_DBW_ADDR_CONFIG, gb_addr_config); + } si_tiling_mode_table_init(rdev); @@ -5213,15 +5215,17 @@ static int si_startup(struct radeon_device *rdev) return r; } - r = rv770_uvd_resume(rdev); - if (!r) { - r = radeon_fence_driver_start_ring(rdev, - R600_RING_TYPE_UVD_INDEX); + if (rdev->has_uvd) { + r = rv770_uvd_resume(rdev); + if (!r) { + r = radeon_fence_driver_start_ring(rdev, + R600_RING_TYPE_UVD_INDEX); + if (r) + dev_err(rdev->dev, "UVD fences init error (%d).\n", r); + } if (r) - dev_err(rdev->dev, "UVD fences init error (%d).\n", r); + rdev->ring[R600_RING_TYPE_UVD_INDEX].ring_size = 0; } - if (r) - rdev->ring[R600_RING_TYPE_UVD_INDEX].ring_size = 0; /* Enable IRQ */ r = si_irq_init(rdev); @@ -5280,16 +5284,18 @@ static int si_startup(struct radeon_device *rdev) if (r) return r; - ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX]; - if (ring->ring_size) { - r = radeon_ring_init(rdev, ring, ring->ring_size, - R600_WB_UVD_RPTR_OFFSET, - UVD_RBC_RB_RPTR, UVD_RBC_RB_WPTR, - 0, 0xfffff, RADEON_CP_PACKET2); - if (!r) - r = r600_uvd_init(rdev); - if (r) - DRM_ERROR("radeon: failed initializing UVD (%d).\n", r); + if (rdev->has_uvd) { + ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX]; + if (ring->ring_size) { + r = radeon_ring_init(rdev, ring, ring->ring_size, + R600_WB_UVD_RPTR_OFFSET, + UVD_RBC_RB_RPTR, UVD_RBC_RB_WPTR, + 0, 0xfffff, RADEON_CP_PACKET2); + if (!r) + r = r600_uvd_init(rdev); + if (r) + DRM_ERROR("radeon: failed initializing UVD (%d).\n", r); + } } r = radeon_ib_pool_init(rdev); @@ -5338,8 +5344,10 @@ int si_suspend(struct radeon_device *rdev) radeon_vm_manager_fini(rdev); si_cp_enable(rdev, false); cayman_dma_stop(rdev); - r600_uvd_rbc_stop(rdev); - radeon_uvd_suspend(rdev); + if (rdev->has_uvd) { + r600_uvd_rbc_stop(rdev); + radeon_uvd_suspend(rdev); + } si_irq_suspend(rdev); radeon_wb_disable(rdev); si_pcie_gart_disable(rdev); @@ -5427,11 +5435,13 @@ int si_init(struct radeon_device *rdev) ring->ring_obj = NULL; r600_ring_init(rdev, ring, 64 * 1024); - r = radeon_uvd_init(rdev); - if (!r) { - ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX]; - ring->ring_obj = NULL; - r600_ring_init(rdev, ring, 4096); + if (rdev->has_uvd) { + r = radeon_uvd_init(rdev); + if (!r) { + ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX]; + ring->ring_obj = NULL; + r600_ring_init(rdev, ring, 4096); + } } rdev->ih.ring_obj = NULL; @@ -5479,7 +5489,8 @@ void si_fini(struct radeon_device *rdev) radeon_vm_manager_fini(rdev); radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); - radeon_uvd_fini(rdev); + if (rdev->has_uvd) + radeon_uvd_fini(rdev); si_pcie_gart_fini(rdev); r600_vram_scratch_fini(rdev); radeon_gem_fini(rdev); -- cgit v1.2.3 From fffbdda4eee69f99b8c798d8eaca91c7e0513f08 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 13 May 2013 13:36:23 -0400 Subject: drm/radeon: add golden register settings for Hainan (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit v2: fix typo Signed-off-by: Alex Deucher Reviewed-by: Christian König --- drivers/gpu/drm/radeon/si.c | 122 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 122 insertions(+) diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index d708fc9aa318..5ffade69af25 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -270,6 +270,40 @@ static const u32 oland_golden_registers[] = 0x15c0, 0x000c0fc0, 0x000c0400 }; +static const u32 hainan_golden_registers[] = +{ + 0x9a10, 0x00010000, 0x00018208, + 0x9830, 0xffffffff, 0x00000000, + 0x9834, 0xf00fffff, 0x00000400, + 0x9838, 0x0002021c, 0x00020200, + 0xd0c0, 0xff000fff, 0x00000100, + 0xd030, 0x000300c0, 0x00800040, + 0xd8c0, 0xff000fff, 0x00000100, + 0xd830, 0x000300c0, 0x00800040, + 0x2ae4, 0x00073ffe, 0x000022a2, + 0x240c, 0x000007ff, 0x00000000, + 0x8a14, 0xf000001f, 0x00000007, + 0x8b24, 0xffffffff, 0x00ffffff, + 0x8b10, 0x0000ff0f, 0x00000000, + 0x28a4c, 0x07ffffff, 0x4e000000, + 0x28350, 0x3f3f3fff, 0x00000000, + 0x30, 0x000000ff, 0x0040, + 0x34, 0x00000040, 0x00004040, + 0x9100, 0x03e00000, 0x03600000, + 0x9060, 0x0000007f, 0x00000020, + 0x9508, 0x00010000, 0x00010000, + 0xac14, 0x000003ff, 0x000000f1, + 0xac10, 0xffffffff, 0x00000000, + 0xac0c, 0xffffffff, 0x00003210, + 0x88d4, 0x0000001f, 0x00000010, + 0x15c0, 0x000c0fc0, 0x000c0400 +}; + +static const u32 hainan_golden_registers2[] = +{ + 0x98f8, 0xffffffff, 0x02010001 +}; + static const u32 tahiti_mgcg_cgcg_init[] = { 0xc400, 0xffffffff, 0xfffffffc, @@ -678,6 +712,83 @@ static const u32 oland_mgcg_cgcg_init[] = 0xd8c0, 0xfffffff0, 0x00000100 }; +static const u32 hainan_mgcg_cgcg_init[] = +{ + 0xc400, 0xffffffff, 0xfffffffc, + 0x802c, 0xffffffff, 0xe0000000, + 0x9a60, 0xffffffff, 0x00000100, + 0x92a4, 0xffffffff, 0x00000100, + 0xc164, 0xffffffff, 0x00000100, + 0x9774, 0xffffffff, 0x00000100, + 0x8984, 0xffffffff, 0x06000100, + 0x8a18, 0xffffffff, 0x00000100, + 0x92a0, 0xffffffff, 0x00000100, + 0xc380, 0xffffffff, 0x00000100, + 0x8b28, 0xffffffff, 0x00000100, + 0x9144, 0xffffffff, 0x00000100, + 0x8d88, 0xffffffff, 0x00000100, + 0x8d8c, 0xffffffff, 0x00000100, + 0x9030, 0xffffffff, 0x00000100, + 0x9034, 0xffffffff, 0x00000100, + 0x9038, 0xffffffff, 0x00000100, + 0x903c, 0xffffffff, 0x00000100, + 0xad80, 0xffffffff, 0x00000100, + 0xac54, 0xffffffff, 0x00000100, + 0x897c, 0xffffffff, 0x06000100, + 0x9868, 0xffffffff, 0x00000100, + 0x9510, 0xffffffff, 0x00000100, + 0xaf04, 0xffffffff, 0x00000100, + 0xae04, 0xffffffff, 0x00000100, + 0x949c, 0xffffffff, 0x00000100, + 0x802c, 0xffffffff, 0xe0000000, + 0x9160, 0xffffffff, 0x00010000, + 0x9164, 0xffffffff, 0x00030002, + 0x9168, 0xffffffff, 0x00040007, + 0x916c, 0xffffffff, 0x00060005, + 0x9170, 0xffffffff, 0x00090008, + 0x9174, 0xffffffff, 0x00020001, + 0x9178, 0xffffffff, 0x00040003, + 0x917c, 0xffffffff, 0x00000007, + 0x9180, 0xffffffff, 0x00060005, + 0x9184, 0xffffffff, 0x00090008, + 0x9188, 0xffffffff, 0x00030002, + 0x918c, 0xffffffff, 0x00050004, + 0x9190, 0xffffffff, 0x00000008, + 0x9194, 0xffffffff, 0x00070006, + 0x9198, 0xffffffff, 0x000a0009, + 0x919c, 0xffffffff, 0x00040003, + 0x91a0, 0xffffffff, 0x00060005, + 0x91a4, 0xffffffff, 0x00000009, + 0x91a8, 0xffffffff, 0x00080007, + 0x91ac, 0xffffffff, 0x000b000a, + 0x91b0, 0xffffffff, 0x00050004, + 0x91b4, 0xffffffff, 0x00070006, + 0x91b8, 0xffffffff, 0x0008000b, + 0x91bc, 0xffffffff, 0x000a0009, + 0x91c0, 0xffffffff, 0x000d000c, + 0x91c4, 0xffffffff, 0x00060005, + 0x91c8, 0xffffffff, 0x00080007, + 0x91cc, 0xffffffff, 0x0000000b, + 0x91d0, 0xffffffff, 0x000a0009, + 0x91d4, 0xffffffff, 0x000d000c, + 0x9150, 0xffffffff, 0x96940200, + 0x8708, 0xffffffff, 0x00900100, + 0xc478, 0xffffffff, 0x00000080, + 0xc404, 0xffffffff, 0x0020003f, + 0x30, 0xffffffff, 0x0000001c, + 0x34, 0x000f0000, 0x000f0000, + 0x160c, 0xffffffff, 0x00000100, + 0x1024, 0xffffffff, 0x00000100, + 0x20a8, 0xffffffff, 0x00000104, + 0x264c, 0x000c0000, 0x000c0000, + 0x2648, 0x000c0000, 0x000c0000, + 0x2f50, 0x00000001, 0x00000001, + 0x30cc, 0xc0000fff, 0x00000104, + 0xc1e4, 0x00000001, 0x00000001, + 0xd0c0, 0xfffffff0, 0x00000100, + 0xd8c0, 0xfffffff0, 0x00000100 +}; + static u32 verde_pg_init[] = { 0x353c, 0xffffffff, 0x40000, @@ -858,6 +969,17 @@ static void si_init_golden_registers(struct radeon_device *rdev) oland_mgcg_cgcg_init, (const u32)ARRAY_SIZE(oland_mgcg_cgcg_init)); break; + case CHIP_HAINAN: + radeon_program_register_sequence(rdev, + hainan_golden_registers, + (const u32)ARRAY_SIZE(hainan_golden_registers)); + radeon_program_register_sequence(rdev, + hainan_golden_registers2, + (const u32)ARRAY_SIZE(hainan_golden_registers2)); + radeon_program_register_sequence(rdev, + hainan_mgcg_cgcg_init, + (const u32)ARRAY_SIZE(hainan_mgcg_cgcg_init)); + break; default: break; } -- cgit v1.2.3 From 2a0f90551a76a626fd6a606877c8635f52f066e6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Jul 2012 18:48:52 -0400 Subject: drm/radeon: add Hainan pci ids MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Alex Deucher Reviewed-by: Christian König --- include/drm/drm_pciids.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index c2af598f701d..bb1bc485390b 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -152,6 +152,12 @@ {0x1002, 0x6621, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6623, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6631, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6660, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6663, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6664, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6665, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6667, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x666F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \ -- cgit v1.2.3 From f3f011750a18abc389ef1b0d504fbeeacf641919 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 20 May 2013 10:20:21 -0600 Subject: Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0" This reverts commit dd72be99d11dbf738d910a38479ce414a51eb21e. Andy Shevchenko reported that this commit broke Intel Medfield devices. Reference: https://lkml.kernel.org/r/CAHp75Vdf6gFZChS47=grUygHBDWcoOWDYPzw+Zj5bdVCWj85Jw@mail.gmail.com Reported-by: Andy Shevchenko Signed-off-by: Bjorn Helgaas --- arch/x86/pci/mrst.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c index 0e0fabf17342..6eb18c42a28a 100644 --- a/arch/x86/pci/mrst.c +++ b/arch/x86/pci/mrst.c @@ -141,11 +141,6 @@ static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn, */ static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg) { - if (bus == 0 && (devfn == PCI_DEVFN(2, 0) - || devfn == PCI_DEVFN(0, 0) - || devfn == PCI_DEVFN(3, 0))) - return 1; - /* This is a workaround for A0 LNC bug where PCI status register does * not have new CAP bit set. can not be written by SW either. * @@ -155,7 +150,10 @@ static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg) */ if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE) return 0; - + if (bus == 0 && (devfn == PCI_DEVFN(2, 0) + || devfn == PCI_DEVFN(0, 0) + || devfn == PCI_DEVFN(3, 0))) + return 1; return 0; /* langwell on others */ } -- cgit v1.2.3 From 0f119a840b128f18b20608f0d33895e85f381105 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 19 May 2013 19:11:54 +0800 Subject: gpio: mcp23s08: Fix build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m This patch fixes below build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m && CONFIG_GPIO_MCP23S08=y. LD init/built-in.o drivers/built-in.o: In function `mcp23017_write': clkdev.c:(.text+0x1e14): undefined reference to `i2c_smbus_write_word_data' drivers/built-in.o: In function `mcp23017_read': clkdev.c:(.text+0x1e24): undefined reference to `i2c_smbus_read_word_data' drivers/built-in.o: In function `mcp23008_write': clkdev.c:(.text+0x1e8c): undefined reference to `i2c_smbus_write_byte_data' drivers/built-in.o: In function `mcp23008_read': clkdev.c:(.text+0x1e98): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `mcp23008_read_regs': clkdev.c:(.text+0x1ed0): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `mcp23s08_init': clkdev.c:(.init.text+0x30): undefined reference to `i2c_register_driver' drivers/built-in.o: In function `mcp23s08_exit': clkdev.c:(.exit.text+0x30): undefined reference to `i2c_del_driver' make: *** [vmlinux] Error 1 When CONFIG_I2C=m, meaning we can't build the drivers in with I2C support. Thus don't allow the drivers to be compiled as built-in when CONFIG_I2C=m. The real fix though is to break the driver apart into a SPI part, an I2C part and a common part. But that's something for 3.11 while this is something for 3.10/stable. Signed-off-by: Axel Lin Reviewed-by: Andy Shevchenko Signed-off-by: Linus Walleij --- drivers/gpio/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 87d567089f13..573c449c49b9 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -636,7 +636,7 @@ config GPIO_MAX7301 config GPIO_MCP23S08 tristate "Microchip MCP23xxx I/O expander" - depends on SPI_MASTER || I2C + depends on (SPI_MASTER && !I2C) || I2C help SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017 I/O expanders. -- cgit v1.2.3 From 2b8b2797142c7951e635c6eec5d1705ee9bc45c5 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Sun, 19 May 2013 22:12:43 +0200 Subject: ARM: plat-orion: Fix num_resources and id for ge10 and ge11 When platform data were moved from arch/arm/mach-mv78xx0/common.c to arch/arm/plat-orion/common.c with the commit "7e3819d ARM: orion: Consolidate ethernet platform data", there were few typo made on gigabit Ethernet interface ge10 and ge11. This commit writes back their initial value, which allows to use this interfaces again. Signed-off-by: Gregory CLEMENT Acked-by: Andrew Lunn Cc: # v3.0.x Signed-off-by: Jason Cooper --- arch/arm/plat-orion/common.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 251f827271e9..c019b7aaf776 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -383,7 +383,7 @@ static struct resource orion_ge10_shared_resources[] = { static struct platform_device orion_ge10_shared = { .name = MV643XX_ETH_SHARED_NAME, - .id = 1, + .id = 2, .dev = { .platform_data = &orion_ge10_shared_data, }, @@ -398,8 +398,8 @@ static struct resource orion_ge10_resources[] = { static struct platform_device orion_ge10 = { .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = 2, + .id = 2, + .num_resources = 1, .resource = orion_ge10_resources, .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), @@ -432,7 +432,7 @@ static struct resource orion_ge11_shared_resources[] = { static struct platform_device orion_ge11_shared = { .name = MV643XX_ETH_SHARED_NAME, - .id = 1, + .id = 3, .dev = { .platform_data = &orion_ge11_shared_data, }, @@ -447,8 +447,8 @@ static struct resource orion_ge11_resources[] = { static struct platform_device orion_ge11 = { .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = 2, + .id = 3, + .num_resources = 1, .resource = orion_ge11_resources, .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), -- cgit v1.2.3 From 489e138eec96f529c5e8d4cd3ea45882ecdbf5ca Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Mon, 20 May 2013 16:13:27 +0200 Subject: ARM: dts: mvebu: Fix wrong the address reg value for the L2-cache node During the conversion to the internal-regs' subnode, the L2-cache node haven not been converted (due to a wrong choice made by myself during the resolution of the merge conflict when I rebased the commit). This leads to wrong address for L2 cache which prevent it to be used on Armada 370. This commit fix the address reg of the e L2-cache node. Signed-off-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index a1a870364dd8..aee2b1866ce2 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -39,7 +39,7 @@ L2: l2-cache { compatible = "marvell,aurora-outer-cache"; - reg = <0xd0008000 0x1000>; + reg = <0x08000 0x1000>; cache-id-part = <0x100>; wt-override; }; -- cgit v1.2.3 From 2519f9abced15b4327f03d7b8666827517582c29 Mon Sep 17 00:00:00 2001 From: David Cohen Date: Mon, 6 May 2013 16:11:03 -0700 Subject: gpio-langwell: fix irq conflicts when DT is not used When DT is not used IOAPIC does not register irq domain. As result IOAPIC won't care about gpio-langwell's virq and may cause conflict if an irq number is equal to gpio-langwell's virq mapped beforehand. This patch tells gpio_langwell to not ignore irq_base if != 0 and preferably use it to avoid the conflict. If DT is used, irq_base can safely be 0. Signed-off-by: David Cohen Acked-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/gpio/gpio-langwell.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/gpio/gpio-langwell.c b/drivers/gpio/gpio-langwell.c index 634c3d37f7b5..62ef10a641c4 100644 --- a/drivers/gpio/gpio-langwell.c +++ b/drivers/gpio/gpio-langwell.c @@ -324,6 +324,7 @@ static int lnw_gpio_probe(struct pci_dev *pdev, resource_size_t start, len; struct lnw_gpio *lnw; u32 gpio_base; + u32 irq_base; int retval; int ngpio = id->driver_data; @@ -345,6 +346,7 @@ static int lnw_gpio_probe(struct pci_dev *pdev, retval = -EFAULT; goto err_ioremap; } + irq_base = *(u32 *)base; gpio_base = *((u32 *)base + 1); /* release the IO mapping, since we already get the info from bar1 */ iounmap(base); @@ -365,13 +367,6 @@ static int lnw_gpio_probe(struct pci_dev *pdev, goto err_ioremap; } - lnw->domain = irq_domain_add_linear(pdev->dev.of_node, ngpio, - &lnw_gpio_irq_ops, lnw); - if (!lnw->domain) { - retval = -ENOMEM; - goto err_ioremap; - } - lnw->reg_base = base; lnw->chip.label = dev_name(&pdev->dev); lnw->chip.request = lnw_gpio_request; @@ -384,6 +379,14 @@ static int lnw_gpio_probe(struct pci_dev *pdev, lnw->chip.ngpio = ngpio; lnw->chip.can_sleep = 0; lnw->pdev = pdev; + + lnw->domain = irq_domain_add_simple(pdev->dev.of_node, ngpio, irq_base, + &lnw_gpio_irq_ops, lnw); + if (!lnw->domain) { + retval = -ENOMEM; + goto err_ioremap; + } + pci_set_drvdata(pdev, lnw); retval = gpiochip_add(&lnw->chip); if (retval) { -- cgit v1.2.3 From 90dae4ebf03063a70d992aad00d5f5a607c31db8 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 29 Apr 2013 16:07:18 +0200 Subject: gpio: mxs: Use set and clear capabilities of the gpio controller The current driver doesn't use the set and clear registers found on the mxs gpio controller. This leads the generic gpio controller to be using some internal value to avoid looking up the value stored in the registers, making it behave pretty much like a cache. This raises some coherency problem when a gpio is not modified by the gpio controller, while it can easily be fixed by using the set and clear registers. Signed-off-by: Maxime Ripard Acked-by: Shawn Guo Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mxs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c index 25000b0f8453..f8e6af20dfbf 100644 --- a/drivers/gpio/gpio-mxs.c +++ b/drivers/gpio/gpio-mxs.c @@ -326,7 +326,8 @@ static int mxs_gpio_probe(struct platform_device *pdev) err = bgpio_init(&port->bgc, &pdev->dev, 4, port->base + PINCTRL_DIN(port), - port->base + PINCTRL_DOUT(port), NULL, + port->base + PINCTRL_DOUT(port) + MXS_SET, + port->base + PINCTRL_DOUT(port) + MXS_CLR, port->base + PINCTRL_DOE(port), NULL, 0); if (err) goto out_irqdesc_free; -- cgit v1.2.3 From d7e5075044f6c4e85f671cb88f99187509f4a2b0 Mon Sep 17 00:00:00 2001 From: Lisa Nguyen Date: Wed, 15 May 2013 23:47:11 -0700 Subject: xen/xenbus: Fixed indentation error in switch case Fixed the indentation error in the switch case in xenbus_dev_backend.c Signed-off-by: Lisa Nguyen Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xenbus/xenbus_dev_backend.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/xen/xenbus/xenbus_dev_backend.c b/drivers/xen/xenbus/xenbus_dev_backend.c index d73000800762..120ae159fdad 100644 --- a/drivers/xen/xenbus/xenbus_dev_backend.c +++ b/drivers/xen/xenbus/xenbus_dev_backend.c @@ -76,16 +76,14 @@ static long xenbus_backend_ioctl(struct file *file, unsigned int cmd, unsigned l return -EPERM; switch (cmd) { - case IOCTL_XENBUS_BACKEND_EVTCHN: - if (xen_store_evtchn > 0) - return xen_store_evtchn; - return -ENODEV; - - case IOCTL_XENBUS_BACKEND_SETUP: - return xenbus_alloc(data); - - default: - return -ENOTTY; + case IOCTL_XENBUS_BACKEND_EVTCHN: + if (xen_store_evtchn > 0) + return xen_store_evtchn; + return -ENODEV; + case IOCTL_XENBUS_BACKEND_SETUP: + return xenbus_alloc(data); + default: + return -ENOTTY; } } -- cgit v1.2.3 From 3d645b02d9c6254caf51d9d78e6d9caf72990b33 Mon Sep 17 00:00:00 2001 From: Lisa Nguyen Date: Wed, 15 May 2013 23:48:03 -0700 Subject: xen/xenbus: Fixed over 80 character limit issue Fixed the format length of the xenbus_backend_ioctl() function to meet the 80 character limit in xenbus_dev_backend.c Signed-off-by: Lisa Nguyen Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xenbus/xenbus_dev_backend.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/xen/xenbus/xenbus_dev_backend.c b/drivers/xen/xenbus/xenbus_dev_backend.c index 120ae159fdad..a6f42fc01407 100644 --- a/drivers/xen/xenbus/xenbus_dev_backend.c +++ b/drivers/xen/xenbus/xenbus_dev_backend.c @@ -70,7 +70,8 @@ static long xenbus_alloc(domid_t domid) return err; } -static long xenbus_backend_ioctl(struct file *file, unsigned int cmd, unsigned long data) +static long xenbus_backend_ioctl(struct file *file, unsigned int cmd, + unsigned long data) { if (!capable(CAP_SYS_ADMIN)) return -EPERM; -- cgit v1.2.3 From fce92683570c2ddcdb82cde67b0b07800106fbd9 Mon Sep 17 00:00:00 2001 From: Lisa Nguyen Date: Wed, 15 May 2013 22:59:40 -0700 Subject: xen: Fixed assignment error in if statement Fixed assignment error in if statement in balloon.c Signed-off-by: Lisa Nguyen Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/balloon.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index a56776dbe095..930fb6817901 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -407,7 +407,8 @@ static enum bp_state decrease_reservation(unsigned long nr_pages, gfp_t gfp) nr_pages = ARRAY_SIZE(frame_list); for (i = 0; i < nr_pages; i++) { - if ((page = alloc_page(gfp)) == NULL) { + page = alloc_page(gfp); + if (page == NULL) { nr_pages = i; state = BP_EAGAIN; break; -- cgit v1.2.3 From 774d5f14ee1ecac55f42a84ff35eb00b896b00b6 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Mon, 20 May 2013 14:13:50 -0400 Subject: NFSv4.1 Fix a pNFS session draining deadlock On a CB_RECALL the callback service thread flushes the inode using filemap_flush prior to scheduling the state manager thread to return the delegation. When pNFS is used and I/O has not yet gone to the data server servicing the inode, a LAYOUTGET can preceed the I/O. Unlike the async filemap_flush call, the LAYOUTGET must proceed to completion. If the state manager starts to recover data while the inode flush is sending the LAYOUTGET, a deadlock occurs as the callback service thread holds the single callback session slot until the flushing is done which blocks the state manager thread, and the state manager thread has set the session draining bit which puts the inode flush LAYOUTGET RPC to sleep on the forechannel slot table waitq. Separate the draining of the back channel from the draining of the fore channel by moving the NFS4_SESSION_DRAINING bit from session scope into the fore and back slot tables. Drain the back channel first allowing the LAYOUTGET call to proceed (and fail) so the callback service thread frees the callback slot. Then proceed with draining the forechannel. Signed-off-by: Andy Adamson Signed-off-by: Trond Myklebust --- fs/nfs/callback_proc.c | 2 +- fs/nfs/callback_xdr.c | 2 +- fs/nfs/nfs4proc.c | 2 +- fs/nfs/nfs4session.c | 4 ++-- fs/nfs/nfs4session.h | 13 ++++++++----- fs/nfs/nfs4state.c | 15 +++++++-------- 6 files changed, 20 insertions(+), 18 deletions(-) diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c index a13d26ede254..0bc27684ebfa 100644 --- a/fs/nfs/callback_proc.c +++ b/fs/nfs/callback_proc.c @@ -414,7 +414,7 @@ __be32 nfs4_callback_sequence(struct cb_sequenceargs *args, spin_lock(&tbl->slot_tbl_lock); /* state manager is resetting the session */ - if (test_bit(NFS4_SESSION_DRAINING, &clp->cl_session->session_state)) { + if (test_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state)) { spin_unlock(&tbl->slot_tbl_lock); status = htonl(NFS4ERR_DELAY); /* Return NFS4ERR_BADSESSION if we're draining the session diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c index 59461c957d9d..a35582c9d444 100644 --- a/fs/nfs/callback_xdr.c +++ b/fs/nfs/callback_xdr.c @@ -763,7 +763,7 @@ static void nfs4_callback_free_slot(struct nfs4_session *session) * A single slot, so highest used slotid is either 0 or -1 */ tbl->highest_used_slotid = NFS4_NO_SLOT; - nfs4_session_drain_complete(session, tbl); + nfs4_slot_tbl_drain_complete(tbl); spin_unlock(&tbl->slot_tbl_lock); } diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 8fbc10054115..4e2fe714d5c2 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -572,7 +572,7 @@ int nfs41_setup_sequence(struct nfs4_session *session, task->tk_timeout = 0; spin_lock(&tbl->slot_tbl_lock); - if (test_bit(NFS4_SESSION_DRAINING, &session->session_state) && + if (test_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state) && !args->sa_privileged) { /* The state manager will wait until the slot table is empty */ dprintk("%s session is draining\n", __func__); diff --git a/fs/nfs/nfs4session.c b/fs/nfs/nfs4session.c index ebda5f4a031b..c4e225e4a9af 100644 --- a/fs/nfs/nfs4session.c +++ b/fs/nfs/nfs4session.c @@ -73,7 +73,7 @@ void nfs4_free_slot(struct nfs4_slot_table *tbl, struct nfs4_slot *slot) tbl->highest_used_slotid = new_max; else { tbl->highest_used_slotid = NFS4_NO_SLOT; - nfs4_session_drain_complete(tbl->session, tbl); + nfs4_slot_tbl_drain_complete(tbl); } } dprintk("%s: slotid %u highest_used_slotid %d\n", __func__, @@ -226,7 +226,7 @@ static bool nfs41_assign_slot(struct rpc_task *task, void *pslot) struct nfs4_slot *slot = pslot; struct nfs4_slot_table *tbl = slot->table; - if (nfs4_session_draining(tbl->session) && !args->sa_privileged) + if (nfs4_slot_tbl_draining(tbl) && !args->sa_privileged) return false; slot->generation = tbl->generation; args->sa_slot = slot; diff --git a/fs/nfs/nfs4session.h b/fs/nfs/nfs4session.h index 6f3cb39386d4..ff7d9f0f8a65 100644 --- a/fs/nfs/nfs4session.h +++ b/fs/nfs/nfs4session.h @@ -25,6 +25,10 @@ struct nfs4_slot { }; /* Sessions */ +enum nfs4_slot_tbl_state { + NFS4_SLOT_TBL_DRAINING, +}; + #define SLOT_TABLE_SZ DIV_ROUND_UP(NFS4_MAX_SLOT_TABLE, 8*sizeof(long)) struct nfs4_slot_table { struct nfs4_session *session; /* Parent session */ @@ -43,6 +47,7 @@ struct nfs4_slot_table { unsigned long generation; /* Generation counter for target_highest_slotid */ struct completion complete; + unsigned long slot_tbl_state; }; /* @@ -68,7 +73,6 @@ struct nfs4_session { enum nfs4_session_state { NFS4_SESSION_INITING, - NFS4_SESSION_DRAINING, }; #if defined(CONFIG_NFS_V4_1) @@ -88,12 +92,11 @@ extern void nfs4_destroy_session(struct nfs4_session *session); extern int nfs4_init_session(struct nfs_server *server); extern int nfs4_init_ds_session(struct nfs_client *, unsigned long); -extern void nfs4_session_drain_complete(struct nfs4_session *session, - struct nfs4_slot_table *tbl); +extern void nfs4_slot_tbl_drain_complete(struct nfs4_slot_table *tbl); -static inline bool nfs4_session_draining(struct nfs4_session *session) +static inline bool nfs4_slot_tbl_draining(struct nfs4_slot_table *tbl) { - return !!test_bit(NFS4_SESSION_DRAINING, &session->session_state); + return !!test_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state); } bool nfs41_wake_and_assign_slot(struct nfs4_slot_table *tbl, diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 300d17d85c0e..1fab140764c4 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -241,7 +241,7 @@ static void nfs4_end_drain_session(struct nfs_client *clp) if (ses == NULL) return; tbl = &ses->fc_slot_table; - if (test_and_clear_bit(NFS4_SESSION_DRAINING, &ses->session_state)) { + if (test_and_clear_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state)) { spin_lock(&tbl->slot_tbl_lock); nfs41_wake_slot_table(tbl); spin_unlock(&tbl->slot_tbl_lock); @@ -251,15 +251,15 @@ static void nfs4_end_drain_session(struct nfs_client *clp) /* * Signal state manager thread if session fore channel is drained */ -void nfs4_session_drain_complete(struct nfs4_session *session, - struct nfs4_slot_table *tbl) +void nfs4_slot_tbl_drain_complete(struct nfs4_slot_table *tbl) { - if (nfs4_session_draining(session)) + if (nfs4_slot_tbl_draining(tbl)) complete(&tbl->complete); } -static int nfs4_wait_on_slot_tbl(struct nfs4_slot_table *tbl) +static int nfs4_drain_slot_tbl(struct nfs4_slot_table *tbl) { + set_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state); spin_lock(&tbl->slot_tbl_lock); if (tbl->highest_used_slotid != NFS4_NO_SLOT) { INIT_COMPLETION(tbl->complete); @@ -275,13 +275,12 @@ static int nfs4_begin_drain_session(struct nfs_client *clp) struct nfs4_session *ses = clp->cl_session; int ret = 0; - set_bit(NFS4_SESSION_DRAINING, &ses->session_state); /* back channel */ - ret = nfs4_wait_on_slot_tbl(&ses->bc_slot_table); + ret = nfs4_drain_slot_tbl(&ses->bc_slot_table); if (ret) return ret; /* fore channel */ - return nfs4_wait_on_slot_tbl(&ses->fc_slot_table); + return nfs4_drain_slot_tbl(&ses->fc_slot_table); } static void nfs41_finish_session_reset(struct nfs_client *clp) -- cgit v1.2.3 From cfb10898efe1bc1f3eb8d8f37f164d9e2ac8b43a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 19 May 2013 14:00:47 +0800 Subject: gpio: Don't override the error code in probe error handling Otherwise, we return 0 in probe error paths when gpiochip_remove() returns 0. Also show error message if gpiochip_remove() fails. Signed-off-by: Axel Lin Cc: Tomoya MORINAGA Cc: Denis Turischev Cc: Lars Poeschel Signed-off-by: Linus Walleij --- drivers/gpio/gpio-ml-ioh.c | 3 +-- drivers/gpio/gpio-pch.c | 3 +-- drivers/gpio/gpio-sch.c | 6 ++---- drivers/gpio/gpio-viperboard.c | 3 ++- 4 files changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c index b73366523fae..0966f2637ad2 100644 --- a/drivers/gpio/gpio-ml-ioh.c +++ b/drivers/gpio/gpio-ml-ioh.c @@ -496,8 +496,7 @@ err_irq_alloc_descs: err_gpiochip_add: while (--i >= 0) { chip--; - ret = gpiochip_remove(&chip->gpio); - if (ret) + if (gpiochip_remove(&chip->gpio)) dev_err(&pdev->dev, "Failed gpiochip_remove(%d)\n", i); } kfree(chip_save); diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c index cdf599687cf7..0fec097e838d 100644 --- a/drivers/gpio/gpio-pch.c +++ b/drivers/gpio/gpio-pch.c @@ -424,8 +424,7 @@ end: err_request_irq: irq_free_descs(irq_base, gpio_pins[chip->ioh]); - ret = gpiochip_remove(&chip->gpio); - if (ret) + if (gpiochip_remove(&chip->gpio)) dev_err(&pdev->dev, "%s gpiochip_remove failed\n", __func__); err_gpiochip_add: diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c index 1e4de16ceb41..5af65719b95d 100644 --- a/drivers/gpio/gpio-sch.c +++ b/drivers/gpio/gpio-sch.c @@ -272,10 +272,8 @@ static int sch_gpio_probe(struct platform_device *pdev) return 0; err_sch_gpio_resume: - err = gpiochip_remove(&sch_gpio_core); - if (err) - dev_err(&pdev->dev, "%s failed, %d\n", - "gpiochip_remove()", err); + if (gpiochip_remove(&sch_gpio_core)) + dev_err(&pdev->dev, "%s gpiochip_remove failed\n", __func__); err_sch_gpio_core: release_region(res->start, resource_size(res)); diff --git a/drivers/gpio/gpio-viperboard.c b/drivers/gpio/gpio-viperboard.c index 095ab14cea4d..5ac2919197fe 100644 --- a/drivers/gpio/gpio-viperboard.c +++ b/drivers/gpio/gpio-viperboard.c @@ -446,7 +446,8 @@ static int vprbrd_gpio_probe(struct platform_device *pdev) return ret; err_gpiob: - ret = gpiochip_remove(&vb_gpio->gpioa); + if (gpiochip_remove(&vb_gpio->gpioa)) + dev_err(&pdev->dev, "%s gpiochip_remove failed\n", __func__); err_gpioa: return ret; -- cgit v1.2.3 From 2a0ebf80aa95cc758d4725f74a7016e992606a39 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 19 May 2013 21:52:20 +0300 Subject: USB: cxacru: potential underflow in cxacru_cm_get_array() The value of "offd" comes off the instance->rcv_buf[] and we used it as the offset into an array. The problem is that we check the upper bound but not for negative values. Signed-off-by: Dan Carpenter Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/atm/cxacru.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index b7eb86ad6bf2..8a7eb77233b4 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -686,7 +686,8 @@ static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_requ { int ret, len; __le32 *buf; - int offb, offd; + int offb; + unsigned int offd; const int stride = CMD_PACKET_SIZE / (4 * 2) - 1; int buflen = ((size - 1) / stride + 1 + size * 2) * 4; -- cgit v1.2.3 From 5e427ec2d066b48a5c27b3a5a3315f7e4e729077 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 20 May 2013 11:36:03 -0700 Subject: x86: Fix bit corruption at CPU resume time MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In commit 78d77df71510 ("x86-64, init: Do not set NX bits on non-NX capable hardware") we added the early_pmd_flags that gets the NX bit set when a CPU supports NX. However, the new variable was marked __initdata, because the main _use_ of this is in an __init routine. However, the bit setting happens from secondary_startup_64(), which is called not only at bootup, but on every secondary CPU start. Including resuming from STR and at CPU hotplug time. So the value cannot be __initdata. Reported-bisected-and-tested-by: Michal Hocko Cc: stable@vger.kernel.org # v3.9 Acked-by: Peter Anvin Cc: Fernando Luis Vázquez Cao Signed-off-by: Linus Torvalds --- arch/x86/kernel/head64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index dab95a85f7f8..55b67614ed94 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -34,7 +34,7 @@ extern pgd_t early_level4_pgt[PTRS_PER_PGD]; extern pmd_t early_dynamic_pgts[EARLY_DYNAMIC_PAGE_TABLES][PTRS_PER_PMD]; static unsigned int __initdata next_early_pgt = 2; -pmdval_t __initdata early_pmd_flags = __PAGE_KERNEL_LARGE & ~(_PAGE_GLOBAL | _PAGE_NX); +pmdval_t early_pmd_flags = __PAGE_KERNEL_LARGE & ~(_PAGE_GLOBAL | _PAGE_NX); /* Wipe all early page tables except for the kernel symbol map */ static void __init reset_early_page_tables(void) -- cgit v1.2.3 From dbd2df859a4d992ccbceeb22c37f6a6c4aa4dc01 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Tue, 7 May 2013 08:27:16 -0300 Subject: serial: 8250_dw: Add valid clk pointer check Commit ffc3ae6dd "serial: 8250_dw: Enable runtime PM" introduced runtime PM management, which enables/disables the clk without checking if the clk is valid. However, this driver allows to be probed without a defined clk, using clock-frequency, as a fallback. Therefore, on platforms that are device tree probed using clock-frequency instead of clk, we get an ugly NULL pointer dereference. This patch fixes it by simply adding a check before accessing the clk api. Signed-off-by: Ezequiel Garcia Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dw.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index beaa283f5cc6..0b0eef900cad 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -338,7 +338,8 @@ static int dw8250_runtime_suspend(struct device *dev) { struct dw8250_data *data = dev_get_drvdata(dev); - clk_disable_unprepare(data->clk); + if (!IS_ERR(data->clk)) + clk_disable_unprepare(data->clk); return 0; } @@ -347,7 +348,8 @@ static int dw8250_runtime_resume(struct device *dev) { struct dw8250_data *data = dev_get_drvdata(dev); - clk_prepare_enable(data->clk); + if (!IS_ERR(data->clk)) + clk_prepare_enable(data->clk); return 0; } -- cgit v1.2.3 From 383d2fc96c1983f5cd7fca3a3b1c9b8d8ee0de66 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 20 May 2013 19:07:30 +0200 Subject: tty: nwpserial: Pass correct pointer to free_irq() free_irq() expects the same pointer that was passed to request_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: @r1@ type T; T devid; @@ request_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) Signed-off-by: Lars-Peter Clausen Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/nwpserial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c index 77287c54f331..549c70a2a63e 100644 --- a/drivers/tty/serial/nwpserial.c +++ b/drivers/tty/serial/nwpserial.c @@ -199,7 +199,7 @@ static void nwpserial_shutdown(struct uart_port *port) dcr_write(up->dcr_host, UART_IER, up->ier); /* free irq */ - free_irq(up->port.irq, port); + free_irq(up->port.irq, up); } static int nwpserial_verify_port(struct uart_port *port, -- cgit v1.2.3 From f6b6f52b583003ad443d5709c56b8858466c4268 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 9 May 2013 13:50:55 +0100 Subject: serial: pl011: protect attribute read from NULL platform data struct It's completely feasible that platform data will be empty i.e. when booting with Device Tree with no device AUXDATA. So we must protect it's use in these use-cases, or risk a kernel Oops. Cc: Russell King Cc: Jiri Slaby Cc: Arnd Bergmann Signed-off-by: Lee Jones Reviewed-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/amba-pl011.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 8ab70a620919..e2774f9ecd59 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -332,7 +332,7 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port * dmaengine_slave_config(chan, &rx_conf); uap->dmarx.chan = chan; - if (plat->dma_rx_poll_enable) { + if (plat && plat->dma_rx_poll_enable) { /* Set poll rate if specified. */ if (plat->dma_rx_poll_rate) { uap->dmarx.auto_poll_rate = false; -- cgit v1.2.3 From a82ea439655a66d587f353a3992521159f4050ee Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 27 Apr 2013 18:14:29 +0800 Subject: serial: samsung: add missing platform_driver_unregister() when module exit We have registered platform driver when module init, and need unregister it when module exit. Signed-off-by: Wei Yongjun Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 074b9194144f..89429410a245 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1803,6 +1803,7 @@ static int __init s3c24xx_serial_modinit(void) static void __exit s3c24xx_serial_modexit(void) { + platform_driver_unregister(&samsung_serial_driver); uart_unregister_driver(&s3c24xx_uart_drv); } -- cgit v1.2.3 From 9bcc3278445bedc272dc2c432e81502d00ac9182 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 25 Apr 2013 15:34:27 +0800 Subject: tty: serial: mpc5xxx: fix error handing in mpc52xx_uart_init() Add the missing uart_unregister_driver() and uninit before return from mpc52xx_uart_init() in the error handling case. Signed-off-by: Wei Yongjun Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mpc52xx_uart.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index 018bad922554..f51b280f3bf2 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -1497,18 +1497,23 @@ mpc52xx_uart_init(void) if (psc_ops && psc_ops->fifoc_init) { ret = psc_ops->fifoc_init(); if (ret) - return ret; + goto err_init; } ret = platform_driver_register(&mpc52xx_uart_of_driver); if (ret) { printk(KERN_ERR "%s: platform_driver_register failed (%i)\n", __FILE__, ret); - uart_unregister_driver(&mpc52xx_uart_driver); - return ret; + goto err_reg; } return 0; +err_reg: + if (psc_ops && psc_ops->fifoc_uninit) + psc_ops->fifoc_uninit(); +err_init: + uart_unregister_driver(&mpc52xx_uart_driver); + return ret; } static void __exit -- cgit v1.2.3 From 2b359172e013c6b1b7e424e5be92a70fc7cceaaf Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 25 Apr 2013 09:17:23 +0800 Subject: serial: mcf: missing uart_unregister_driver() on error in mcf_init() Add the missing uart_unregister_driver() before return from mcf_init() in the error handling case. Signed-off-by: Wei Yongjun Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mcf.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index e956377a38fe..65be0c00c4bf 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -707,8 +707,10 @@ static int __init mcf_init(void) if (rc) return rc; rc = platform_driver_register(&mcf_platform_driver); - if (rc) + if (rc) { + uart_unregister_driver(&mcf_driver); return rc; + } return 0; } -- cgit v1.2.3 From 416187caedf1c3b30f9bd1ffe4f4e5596fe65ae6 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 25 Apr 2013 15:36:48 +0200 Subject: TTY: rocket, fix more no-PCI warnings Commit "TTY: rocket, fix compilation warning" fixed a compilation warning, but there was still a problem with !CONFIG_PCI configs. So fix them for good by coupling the PCI functions together and moving them inside a common #ifdef. Signed-off-by: Jiri Slaby Reported-by: kbuild test robot Signed-off-by: Greg Kroah-Hartman --- drivers/tty/rocket.c | 288 +++++++++++++++++++++++++-------------------------- 1 file changed, 141 insertions(+), 147 deletions(-) diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index 82d35c5a58fd..354564ea47c5 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -150,12 +150,14 @@ static Word_t aiop_intr_bits[AIOP_CTL_SIZE] = { AIOP_INTR_BIT_3 }; +#ifdef CONFIG_PCI static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = { UPCI_AIOP_INTR_BIT_0, UPCI_AIOP_INTR_BIT_1, UPCI_AIOP_INTR_BIT_2, UPCI_AIOP_INTR_BIT_3 }; +#endif static Byte_t RData[RDATASIZE] = { 0x00, 0x09, 0xf6, 0x82, @@ -227,7 +229,6 @@ static unsigned long nextLineNumber; static int __init init_ISA(int i); static void rp_wait_until_sent(struct tty_struct *tty, int timeout); static void rp_flush_buffer(struct tty_struct *tty); -static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model); static unsigned char GetLineNumber(int ctrl, int aiop, int ch); static unsigned char SetLineNumber(int ctrl, int aiop, int ch); static void rp_start(struct tty_struct *tty); @@ -241,11 +242,6 @@ static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags); static void sModemReset(CONTROLLER_T * CtlP, int chan, int on); static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on); static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data); -static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum, - ByteIO_t * AiopIOList, int AiopIOListSize, - WordIO_t ConfigIO, int IRQNum, Byte_t Frequency, - int PeriodicOnly, int altChanRingIndicator, - int UPCIRingInd); static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO, ByteIO_t * AiopIOList, int AiopIOListSize, int IRQNum, Byte_t Frequency, int PeriodicOnly); @@ -1775,6 +1771,145 @@ static DEFINE_PCI_DEVICE_TABLE(rocket_pci_ids) = { }; MODULE_DEVICE_TABLE(pci, rocket_pci_ids); +/* Resets the speaker controller on RocketModem II and III devices */ +static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model) +{ + ByteIO_t addr; + + /* RocketModem II speaker control is at the 8th port location of offset 0x40 */ + if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) { + addr = CtlP->AiopIO[0] + 0x4F; + sOutB(addr, 0); + } + + /* RocketModem III speaker control is at the 1st port location of offset 0x80 */ + if ((model == MODEL_UPCI_RM3_8PORT) + || (model == MODEL_UPCI_RM3_4PORT)) { + addr = CtlP->AiopIO[0] + 0x88; + sOutB(addr, 0); + } +} + +/*************************************************************************** +Function: sPCIInitController +Purpose: Initialization of controller global registers and controller + structure. +Call: sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize, + IRQNum,Frequency,PeriodicOnly) + CONTROLLER_T *CtlP; Ptr to controller structure + int CtlNum; Controller number + ByteIO_t *AiopIOList; List of I/O addresses for each AIOP. + This list must be in the order the AIOPs will be found on the + controller. Once an AIOP in the list is not found, it is + assumed that there are no more AIOPs on the controller. + int AiopIOListSize; Number of addresses in AiopIOList + int IRQNum; Interrupt Request number. Can be any of the following: + 0: Disable global interrupts + 3: IRQ 3 + 4: IRQ 4 + 5: IRQ 5 + 9: IRQ 9 + 10: IRQ 10 + 11: IRQ 11 + 12: IRQ 12 + 15: IRQ 15 + Byte_t Frequency: A flag identifying the frequency + of the periodic interrupt, can be any one of the following: + FREQ_DIS - periodic interrupt disabled + FREQ_137HZ - 137 Hertz + FREQ_69HZ - 69 Hertz + FREQ_34HZ - 34 Hertz + FREQ_17HZ - 17 Hertz + FREQ_9HZ - 9 Hertz + FREQ_4HZ - 4 Hertz + If IRQNum is set to 0 the Frequency parameter is + overidden, it is forced to a value of FREQ_DIS. + int PeriodicOnly: 1 if all interrupts except the periodic + interrupt are to be blocked. + 0 is both the periodic interrupt and + other channel interrupts are allowed. + If IRQNum is set to 0 the PeriodicOnly parameter is + overidden, it is forced to a value of 0. +Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller + initialization failed. + +Comments: + If periodic interrupts are to be disabled but AIOP interrupts + are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0. + + If interrupts are to be completely disabled set IRQNum to 0. + + Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an + invalid combination. + + This function performs initialization of global interrupt modes, + but it does not actually enable global interrupts. To enable + and disable global interrupts use functions sEnGlobalInt() and + sDisGlobalInt(). Enabling of global interrupts is normally not + done until all other initializations are complete. + + Even if interrupts are globally enabled, they must also be + individually enabled for each channel that is to generate + interrupts. + +Warnings: No range checking on any of the parameters is done. + + No context switches are allowed while executing this function. + + After this function all AIOPs on the controller are disabled, + they can be enabled with sEnAiop(). +*/ +static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum, + ByteIO_t * AiopIOList, int AiopIOListSize, + WordIO_t ConfigIO, int IRQNum, Byte_t Frequency, + int PeriodicOnly, int altChanRingIndicator, + int UPCIRingInd) +{ + int i; + ByteIO_t io; + + CtlP->AltChanRingIndicator = altChanRingIndicator; + CtlP->UPCIRingInd = UPCIRingInd; + CtlP->CtlNum = CtlNum; + CtlP->CtlID = CTLID_0001; /* controller release 1 */ + CtlP->BusType = isPCI; /* controller release 1 */ + + if (ConfigIO) { + CtlP->isUPCI = 1; + CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL; + CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL; + CtlP->AiopIntrBits = upci_aiop_intr_bits; + } else { + CtlP->isUPCI = 0; + CtlP->PCIIO = + (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC); + CtlP->AiopIntrBits = aiop_intr_bits; + } + + sPCIControllerEOI(CtlP); /* clear EOI if warm init */ + /* Init AIOPs */ + CtlP->NumAiop = 0; + for (i = 0; i < AiopIOListSize; i++) { + io = AiopIOList[i]; + CtlP->AiopIO[i] = (WordIO_t) io; + CtlP->AiopIntChanIO[i] = io + _INT_CHAN; + + CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */ + if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */ + break; /* done looking for AIOPs */ + + CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */ + sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */ + sOutB(io + _INDX_DATA, sClockPrescale); + CtlP->NumAiop++; /* bump count of AIOPs */ + } + + if (CtlP->NumAiop == 0) + return (-1); + else + return (CtlP->NumAiop); +} + /* * Called when a PCI card is found. Retrieves and stores model information, * init's aiopic and serial port hardware. @@ -2519,147 +2654,6 @@ static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO, return (CtlP->NumAiop); } -#ifdef CONFIG_PCI -/*************************************************************************** -Function: sPCIInitController -Purpose: Initialization of controller global registers and controller - structure. -Call: sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize, - IRQNum,Frequency,PeriodicOnly) - CONTROLLER_T *CtlP; Ptr to controller structure - int CtlNum; Controller number - ByteIO_t *AiopIOList; List of I/O addresses for each AIOP. - This list must be in the order the AIOPs will be found on the - controller. Once an AIOP in the list is not found, it is - assumed that there are no more AIOPs on the controller. - int AiopIOListSize; Number of addresses in AiopIOList - int IRQNum; Interrupt Request number. Can be any of the following: - 0: Disable global interrupts - 3: IRQ 3 - 4: IRQ 4 - 5: IRQ 5 - 9: IRQ 9 - 10: IRQ 10 - 11: IRQ 11 - 12: IRQ 12 - 15: IRQ 15 - Byte_t Frequency: A flag identifying the frequency - of the periodic interrupt, can be any one of the following: - FREQ_DIS - periodic interrupt disabled - FREQ_137HZ - 137 Hertz - FREQ_69HZ - 69 Hertz - FREQ_34HZ - 34 Hertz - FREQ_17HZ - 17 Hertz - FREQ_9HZ - 9 Hertz - FREQ_4HZ - 4 Hertz - If IRQNum is set to 0 the Frequency parameter is - overidden, it is forced to a value of FREQ_DIS. - int PeriodicOnly: 1 if all interrupts except the periodic - interrupt are to be blocked. - 0 is both the periodic interrupt and - other channel interrupts are allowed. - If IRQNum is set to 0 the PeriodicOnly parameter is - overidden, it is forced to a value of 0. -Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller - initialization failed. - -Comments: - If periodic interrupts are to be disabled but AIOP interrupts - are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0. - - If interrupts are to be completely disabled set IRQNum to 0. - - Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an - invalid combination. - - This function performs initialization of global interrupt modes, - but it does not actually enable global interrupts. To enable - and disable global interrupts use functions sEnGlobalInt() and - sDisGlobalInt(). Enabling of global interrupts is normally not - done until all other initializations are complete. - - Even if interrupts are globally enabled, they must also be - individually enabled for each channel that is to generate - interrupts. - -Warnings: No range checking on any of the parameters is done. - - No context switches are allowed while executing this function. - - After this function all AIOPs on the controller are disabled, - they can be enabled with sEnAiop(). -*/ -static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum, - ByteIO_t * AiopIOList, int AiopIOListSize, - WordIO_t ConfigIO, int IRQNum, Byte_t Frequency, - int PeriodicOnly, int altChanRingIndicator, - int UPCIRingInd) -{ - int i; - ByteIO_t io; - - CtlP->AltChanRingIndicator = altChanRingIndicator; - CtlP->UPCIRingInd = UPCIRingInd; - CtlP->CtlNum = CtlNum; - CtlP->CtlID = CTLID_0001; /* controller release 1 */ - CtlP->BusType = isPCI; /* controller release 1 */ - - if (ConfigIO) { - CtlP->isUPCI = 1; - CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL; - CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL; - CtlP->AiopIntrBits = upci_aiop_intr_bits; - } else { - CtlP->isUPCI = 0; - CtlP->PCIIO = - (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC); - CtlP->AiopIntrBits = aiop_intr_bits; - } - - sPCIControllerEOI(CtlP); /* clear EOI if warm init */ - /* Init AIOPs */ - CtlP->NumAiop = 0; - for (i = 0; i < AiopIOListSize; i++) { - io = AiopIOList[i]; - CtlP->AiopIO[i] = (WordIO_t) io; - CtlP->AiopIntChanIO[i] = io + _INT_CHAN; - - CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */ - if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */ - break; /* done looking for AIOPs */ - - CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */ - sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */ - sOutB(io + _INDX_DATA, sClockPrescale); - CtlP->NumAiop++; /* bump count of AIOPs */ - } - - if (CtlP->NumAiop == 0) - return (-1); - else - return (CtlP->NumAiop); -} - -/* Resets the speaker controller on RocketModem II and III devices */ -static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model) -{ - ByteIO_t addr; - - /* RocketModem II speaker control is at the 8th port location of offset 0x40 */ - if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) { - addr = CtlP->AiopIO[0] + 0x4F; - sOutB(addr, 0); - } - - /* RocketModem III speaker control is at the 1st port location of offset 0x80 */ - if ((model == MODEL_UPCI_RM3_8PORT) - || (model == MODEL_UPCI_RM3_4PORT)) { - addr = CtlP->AiopIO[0] + 0x88; - sOutB(addr, 0); - } -} -#endif - /*************************************************************************** Function: sReadAiopID Purpose: Read the AIOP idenfication number directly from an AIOP. -- cgit v1.2.3 From df957d2b9c5c8aa12f050f94c9f15236fb0e51f1 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 27 Apr 2013 18:14:56 +0800 Subject: TTY: ehv_bytechan: add missing platform_driver_unregister() when module exit We have registered platform driver when module init, and need unregister it when module exit. Signed-off-by: Wei Yongjun Signed-off-by: Greg Kroah-Hartman --- drivers/tty/ehv_bytechan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c index 6d0c27cd03da..9bffcec5ad82 100644 --- a/drivers/tty/ehv_bytechan.c +++ b/drivers/tty/ehv_bytechan.c @@ -859,6 +859,7 @@ error: */ static void __exit ehv_bc_exit(void) { + platform_driver_unregister(&ehv_bc_tty_driver); tty_unregister_driver(ehv_bc_driver); put_tty_driver(ehv_bc_driver); kfree(bcs); -- cgit v1.2.3 From 421b40a6286ee343d77d5e51f5ee6d04d7a2a90f Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Fri, 17 May 2013 12:41:03 -0400 Subject: tty/vt: Fix vc_deallocate() lock order Now that the tty port owns the flip buffers and i/o is allowed from the driver even when no tty is attached, the destruction of the tty port (and the flip buffers) must ensure that no outstanding work is pending. Unfortunately, this creates a lock order problem with the console_lock (see attached lockdep report [1] below). For single console deallocation, drop the console_lock prior to port destruction. When multiple console deallocation, defer port destruction until the consoles have been deallocated. tty_port_destroy() is not required if the port has not been used; remove from vc_allocate() failure path. [1] lockdep report from Dave Jones ====================================================== [ INFO: possible circular locking dependency detected ] 3.9.0+ #16 Not tainted ------------------------------------------------------- (agetty)/26163 is trying to acquire lock: blocked: ((&buf->work)){+.+...}, instance: ffff88011c8b0020, at: [] flush_work+0x5/0x2e0 but task is already holding lock: blocked: (console_lock){+.+.+.}, instance: ffffffff81c2fde0, at: [] vt_ioctl+0xb61/0x1230 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (console_lock){+.+.+.}: [] lock_acquire+0xa4/0x210 [] console_lock+0x77/0x80 [] con_flush_chars+0x2d/0x50 [] n_tty_receive_buf+0x122/0x14d0 [] flush_to_ldisc+0x119/0x170 [] process_one_work+0x211/0x700 [] worker_thread+0x11b/0x3a0 [] kthread+0xed/0x100 [] ret_from_fork+0x7c/0xb0 -> #0 ((&buf->work)){+.+...}: [] __lock_acquire+0x193a/0x1c00 [] lock_acquire+0xa4/0x210 [] flush_work+0x4e/0x2e0 [] __cancel_work_timer+0x95/0x130 [] cancel_work_sync+0x10/0x20 [] tty_port_destroy+0x12/0x20 [] vc_deallocate+0xf8/0x110 [] vt_ioctl+0xb6c/0x1230 [] tty_ioctl+0x285/0xd50 [] do_vfs_ioctl+0x305/0x530 [] sys_ioctl+0x81/0xa0 [] system_call_fastpath+0x16/0x1b other info that might help us debug this: [ 6760.076175] Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(console_lock); lock((&buf->work)); lock(console_lock); lock((&buf->work)); *** DEADLOCK *** 1 lock on stack by (agetty)/26163: #0: blocked: (console_lock){+.+.+.}, instance: ffffffff81c2fde0, at: [] vt_ioctl+0xb61/0x1230 stack backtrace: Pid: 26163, comm: (agetty) Not tainted 3.9.0+ #16 Call Trace: [] print_circular_bug+0x200/0x20e [] __lock_acquire+0x193a/0x1c00 [] ? sched_clock+0x9/0x10 [] ? sched_clock+0x9/0x10 [] ? native_sched_clock+0x20/0x80 [] lock_acquire+0xa4/0x210 [] ? flush_work+0x5/0x2e0 [] flush_work+0x4e/0x2e0 [] ? flush_work+0x5/0x2e0 [] ? mark_held_locks+0xbb/0x140 [] ? __free_pages_ok.part.57+0x93/0xc0 [] ? mark_held_locks+0xbb/0x140 [] ? __cancel_work_timer+0x82/0x130 [] __cancel_work_timer+0x95/0x130 [] cancel_work_sync+0x10/0x20 [] tty_port_destroy+0x12/0x20 [] vc_deallocate+0xf8/0x110 [] vt_ioctl+0xb6c/0x1230 [] ? lock_release_holdtime.part.30+0xa1/0x170 [] tty_ioctl+0x285/0xd50 [] ? inode_has_perm.isra.46.constprop.61+0x56/0x80 [] do_vfs_ioctl+0x305/0x530 [] ? selinux_file_ioctl+0x5b/0x110 [] sys_ioctl+0x81/0xa0 [] system_call_fastpath+0x16/0x1b Cc: Dave Jones Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 14 +++++----- drivers/tty/vt/vt_ioctl.c | 67 ++++++++++++++++++++++++++++++++++------------- include/linux/vt_kern.h | 2 +- 3 files changed, 56 insertions(+), 27 deletions(-) diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index fbd447b390f7..740202d8a5c4 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -779,7 +779,6 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */ con_set_default_unimap(vc); vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL); if (!vc->vc_screenbuf) { - tty_port_destroy(&vc->port); kfree(vc); vc_cons[currcons].d = NULL; return -ENOMEM; @@ -986,26 +985,25 @@ static int vt_resize(struct tty_struct *tty, struct winsize *ws) return ret; } -void vc_deallocate(unsigned int currcons) +struct vc_data *vc_deallocate(unsigned int currcons) { + struct vc_data *vc = NULL; + WARN_CONSOLE_UNLOCKED(); if (vc_cons_allocated(currcons)) { - struct vc_data *vc = vc_cons[currcons].d; - struct vt_notifier_param param = { .vc = vc }; + struct vt_notifier_param param; + param.vc = vc = vc_cons[currcons].d; atomic_notifier_call_chain(&vt_notifier_list, VT_DEALLOCATE, ¶m); vcs_remove_sysfs(currcons); vc->vc_sw->con_deinit(vc); put_pid(vc->vt_pid); module_put(vc->vc_sw->owner); kfree(vc->vc_screenbuf); - if (currcons >= MIN_NR_CONSOLES) { - tty_port_destroy(&vc->port); - kfree(vc); - } vc_cons[currcons].d = NULL; } + return vc; } /* diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 98ff1735eafc..fc2c06c66e89 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -283,6 +283,51 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_ return 0; } +/* deallocate a single console, if possible (leave 0) */ +static int vt_disallocate(unsigned int vc_num) +{ + struct vc_data *vc = NULL; + int ret = 0; + + if (!vc_num) + return 0; + + console_lock(); + if (VT_BUSY(vc_num)) + ret = -EBUSY; + else + vc = vc_deallocate(vc_num); + console_unlock(); + + if (vc && vc_num >= MIN_NR_CONSOLES) { + tty_port_destroy(&vc->port); + kfree(vc); + } + + return ret; +} + +/* deallocate all unused consoles, but leave 0 */ +static void vt_disallocate_all(void) +{ + struct vc_data *vc[MAX_NR_CONSOLES]; + int i; + + console_lock(); + for (i = 1; i < MAX_NR_CONSOLES; i++) + if (!VT_BUSY(i)) + vc[i] = vc_deallocate(i); + else + vc[i] = NULL; + console_unlock(); + + for (i = 1; i < MAX_NR_CONSOLES; i++) { + if (vc[i] && i >= MIN_NR_CONSOLES) { + tty_port_destroy(&vc[i]->port); + kfree(vc[i]); + } + } +} /* @@ -769,24 +814,10 @@ int vt_ioctl(struct tty_struct *tty, ret = -ENXIO; break; } - if (arg == 0) { - /* deallocate all unused consoles, but leave 0 */ - console_lock(); - for (i=1; i Date: Thu, 9 May 2013 14:16:47 +0800 Subject: TTY: Fix tty miss restart after we turn off flow-control I meet emacs hang in start if I do the operation below: 1: echo 3 > /proc/sys/vm/drop_caches 2: emacs BigFile 3: Press CTRL-S follow 2 immediately Then emacs hang on, CTRL-Q can't resume, the terminal hang on, you can do nothing with this terminal except close it. The reason is before emacs takeover control the tty, we use CTRL-S to XOFF it. Then when emacs takeover the control, it may don't use the flow-control, so emacs hang. This patch fix it. This patch will fix a kind of strange tty relation hang problem, I believe I meet it with vim in ssh, and also see below bug report: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=465823 Signed-off-by: Wang YanQing Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index d655416087b7..6c7fe90ad72d 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1573,6 +1573,14 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) ldata->real_raw = 0; } n_tty_set_room(tty); + /* + * Fix tty hang when I_IXON(tty) is cleared, but the tty + * been stopped by STOP_CHAR(tty) before it. + */ + if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped) { + start_tty(tty); + } + /* The termios change make the tty ready for I/O */ wake_up_interruptible(&tty->write_wait); wake_up_interruptible(&tty->read_wait); -- cgit v1.2.3 From 25dff94ff9df40d4d663bb6ea3193a7758cc50e5 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 19 May 2013 08:36:36 +0000 Subject: isdn/kcapi: fix a small underflow In get_capi_ctr_by_nr() and get_capi_appl_by_nr() the parameter comes from skb->data. The current code can underflow to one space before the start of the array. The sanity check isn't needed in __get_capi_appl_by_nr() but I changed it to match the others. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/isdn/capi/kcapi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/isdn/capi/kcapi.c b/drivers/isdn/capi/kcapi.c index 9b1b274c7d25..c123709acf82 100644 --- a/drivers/isdn/capi/kcapi.c +++ b/drivers/isdn/capi/kcapi.c @@ -93,7 +93,7 @@ capi_ctr_put(struct capi_ctr *ctr) static inline struct capi_ctr *get_capi_ctr_by_nr(u16 contr) { - if (contr - 1 >= CAPI_MAXCONTR) + if (contr < 1 || contr - 1 >= CAPI_MAXCONTR) return NULL; return capi_controller[contr - 1]; @@ -103,7 +103,7 @@ static inline struct capi20_appl *__get_capi_appl_by_nr(u16 applid) { lockdep_assert_held(&capi_controller_lock); - if (applid - 1 >= CAPI_MAXAPPL) + if (applid < 1 || applid - 1 >= CAPI_MAXAPPL) return NULL; return capi_applications[applid - 1]; @@ -111,7 +111,7 @@ static inline struct capi20_appl *__get_capi_appl_by_nr(u16 applid) static inline struct capi20_appl *get_capi_appl_by_nr(u16 applid) { - if (applid - 1 >= CAPI_MAXAPPL) + if (applid < 1 || applid - 1 >= CAPI_MAXAPPL) return NULL; return rcu_dereference(capi_applications[applid - 1]); -- cgit v1.2.3 From 4d12997a9bb3d217ad4b925ec3074ec89364bf95 Mon Sep 17 00:00:00 2001 From: Petko Manolov Date: Sun, 19 May 2013 23:08:47 +0000 Subject: drivers: net: usb: rtl8150: concurrent URB bugfix This patch fixes a potential race with concurrently running asynchronous write requests. The values for device's RX control register are now stored in dynamically allocated buffers so each URB submission has it's own copy. Doing it the old way is data clobbering prone. This patch is against latest 'net' tree. Signed-off-by: Petko Manolov Signed-off-by: David S. Miller --- drivers/net/usb/rtl8150.c | 100 +++++++++++++++++++++------------------------- 1 file changed, 46 insertions(+), 54 deletions(-) diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c index a491d3a95393..6cbdac67f3a0 100644 --- a/drivers/net/usb/rtl8150.c +++ b/drivers/net/usb/rtl8150.c @@ -130,19 +130,23 @@ struct rtl8150 { struct usb_device *udev; struct tasklet_struct tl; struct net_device *netdev; - struct urb *rx_urb, *tx_urb, *intr_urb, *ctrl_urb; + struct urb *rx_urb, *tx_urb, *intr_urb; struct sk_buff *tx_skb, *rx_skb; struct sk_buff *rx_skb_pool[RX_SKB_POOL_SIZE]; spinlock_t rx_pool_lock; struct usb_ctrlrequest dr; int intr_interval; - __le16 rx_creg; u8 *intr_buff; u8 phy; }; typedef struct rtl8150 rtl8150_t; +struct async_req { + struct usb_ctrlrequest dr; + u16 rx_creg; +}; + static const char driver_name [] = "rtl8150"; /* @@ -164,51 +168,47 @@ static int set_registers(rtl8150_t * dev, u16 indx, u16 size, void *data) indx, 0, data, size, 500); } -static void ctrl_callback(struct urb *urb) +static void async_set_reg_cb(struct urb *urb) { - rtl8150_t *dev; + struct async_req *req = (struct async_req *)urb->context; int status = urb->status; - switch (status) { - case 0: - break; - case -EINPROGRESS: - break; - case -ENOENT: - break; - default: - if (printk_ratelimit()) - dev_warn(&urb->dev->dev, "ctrl urb status %d\n", status); - } - dev = urb->context; - clear_bit(RX_REG_SET, &dev->flags); + if (status < 0) + dev_dbg(&urb->dev->dev, "%s failed with %d", __func__, status); + kfree(req); + usb_free_urb(urb); } -static int async_set_registers(rtl8150_t * dev, u16 indx, u16 size) +static int async_set_registers(rtl8150_t *dev, u16 indx, u16 size, u16 reg) { - int ret; - - if (test_bit(RX_REG_SET, &dev->flags)) - return -EAGAIN; + int res = -ENOMEM; + struct urb *async_urb; + struct async_req *req; - dev->dr.bRequestType = RTL8150_REQT_WRITE; - dev->dr.bRequest = RTL8150_REQ_SET_REGS; - dev->dr.wValue = cpu_to_le16(indx); - dev->dr.wIndex = 0; - dev->dr.wLength = cpu_to_le16(size); - dev->ctrl_urb->transfer_buffer_length = size; - usb_fill_control_urb(dev->ctrl_urb, dev->udev, - usb_sndctrlpipe(dev->udev, 0), (char *) &dev->dr, - &dev->rx_creg, size, ctrl_callback, dev); - if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) { - if (ret == -ENODEV) + req = kmalloc(sizeof(struct async_req), GFP_ATOMIC); + if (req == NULL) + return res; + async_urb = usb_alloc_urb(0, GFP_ATOMIC); + if (async_urb == NULL) { + kfree(req); + return res; + } + req->rx_creg = cpu_to_le16(reg); + req->dr.bRequestType = RTL8150_REQT_WRITE; + req->dr.bRequest = RTL8150_REQ_SET_REGS; + req->dr.wIndex = 0; + req->dr.wValue = cpu_to_le16(indx); + req->dr.wLength = cpu_to_le16(size); + usb_fill_control_urb(async_urb, dev->udev, + usb_sndctrlpipe(dev->udev, 0), (void *)&req->dr, + &req->rx_creg, size, async_set_reg_cb, req); + res = usb_submit_urb(async_urb, GFP_ATOMIC); + if (res) { + if (res == -ENODEV) netif_device_detach(dev->netdev); - dev_err(&dev->udev->dev, - "control request submission failed: %d\n", ret); - } else - set_bit(RX_REG_SET, &dev->flags); - - return ret; + dev_err(&dev->udev->dev, "%s failed with %d\n", __func__, res); + } + return res; } static int read_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 * reg) @@ -330,13 +330,6 @@ static int alloc_all_urbs(rtl8150_t * dev) usb_free_urb(dev->tx_urb); return 0; } - dev->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->ctrl_urb) { - usb_free_urb(dev->rx_urb); - usb_free_urb(dev->tx_urb); - usb_free_urb(dev->intr_urb); - return 0; - } return 1; } @@ -346,7 +339,6 @@ static void free_all_urbs(rtl8150_t * dev) usb_free_urb(dev->rx_urb); usb_free_urb(dev->tx_urb); usb_free_urb(dev->intr_urb); - usb_free_urb(dev->ctrl_urb); } static void unlink_all_urbs(rtl8150_t * dev) @@ -354,7 +346,6 @@ static void unlink_all_urbs(rtl8150_t * dev) usb_kill_urb(dev->rx_urb); usb_kill_urb(dev->tx_urb); usb_kill_urb(dev->intr_urb); - usb_kill_urb(dev->ctrl_urb); } static inline struct sk_buff *pull_skb(rtl8150_t *dev) @@ -629,7 +620,6 @@ static int enable_net_traffic(rtl8150_t * dev) } /* RCR bit7=1 attach Rx info at the end; =0 HW CRC (which is broken) */ rcr = 0x9e; - dev->rx_creg = cpu_to_le16(rcr); tcr = 0xd8; cr = 0x0c; if (!(rcr & 0x80)) @@ -662,20 +652,22 @@ static void rtl8150_tx_timeout(struct net_device *netdev) static void rtl8150_set_multicast(struct net_device *netdev) { rtl8150_t *dev = netdev_priv(netdev); + u16 rx_creg = 0x9e; + netif_stop_queue(netdev); if (netdev->flags & IFF_PROMISC) { - dev->rx_creg |= cpu_to_le16(0x0001); + rx_creg |= 0x0001; dev_info(&netdev->dev, "%s: promiscuous mode\n", netdev->name); } else if (!netdev_mc_empty(netdev) || (netdev->flags & IFF_ALLMULTI)) { - dev->rx_creg &= cpu_to_le16(0xfffe); - dev->rx_creg |= cpu_to_le16(0x0002); + rx_creg &= 0xfffe; + rx_creg |= 0x0002; dev_info(&netdev->dev, "%s: allmulti set\n", netdev->name); } else { /* ~RX_MULTICAST, ~RX_PROMISCUOUS */ - dev->rx_creg &= cpu_to_le16(0x00fc); + rx_creg &= 0x00fc; } - async_set_registers(dev, RCR, 2); + async_set_registers(dev, RCR, sizeof(rx_creg), rx_creg); netif_wake_queue(netdev); } -- cgit v1.2.3 From 98962baad72fd6d393bf39dbb7c2076532c363c6 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 20 May 2013 06:54:43 +0000 Subject: 8139cp: reset BQL when ring tx ring cleared This patch cures transmit timeout's with DHCP observed while running under KVM. When the transmit ring is cleaned out, the Byte Queue Limit values need to be reset. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139cp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index 7d1fb9ad1296..03523459c406 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -1136,6 +1136,7 @@ static void cp_clean_rings (struct cp_private *cp) cp->dev->stats.tx_dropped++; } } + netdev_reset_queue(cp->dev); memset(cp->rx_ring, 0, sizeof(struct cp_desc) * CP_RX_RING_SIZE); memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE); -- cgit v1.2.3 From c7788792a5e7b0d5d7f96d0766b4cb6112d47d75 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 20 May 2013 14:37:38 -0700 Subject: Linux 3.10-rc2 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index cd11e8857604..93875f5122a3 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Unicycling Gorilla # *DOCUMENTATION* -- cgit v1.2.3 From 7e94984495dbce182260fa3dd15687439236b0a1 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 6 May 2013 15:11:10 -0600 Subject: clk: tegra: remove USB from clk init table The USB clocks are just clock gates, so no need to set a specific clock. In fact trying to set a specific clock is just a NOP if the requested clockrate is the same as those of the parent (clk_m) or will trigger a WARN_ON() if rates don't match up. As we are not setting a specific rate, nor activating the clocks at init, there is no point in keeping the the usb entries in the clock init table. Signed-off-by: Lucas Stach Acked-by: Peter De Schrijver Reviewed-by: Prashant Gaikwad Acked-by: Mike Turquette Tested-by: Stephen Warren Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- drivers/clk/tegra/clk-tegra20.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c index 8292a00c3de9..d80c7cc23581 100644 --- a/drivers/clk/tegra/clk-tegra20.c +++ b/drivers/clk/tegra/clk-tegra20.c @@ -1234,9 +1234,6 @@ static __initdata struct tegra_clk_init_table init_table[] = { {uartc, pll_p, 0, 0}, {uartd, pll_p, 0, 0}, {uarte, pll_p, 0, 0}, - {usbd, clk_max, 12000000, 0}, - {usb2, clk_max, 12000000, 0}, - {usb3, clk_max, 12000000, 0}, {pll_a, clk_max, 56448000, 1}, {pll_a_out0, clk_max, 11289600, 1}, {cdev1, clk_max, 0, 1}, -- cgit v1.2.3 From 6ec3240047ee6a4b34f90d45e19ed179bc9b4a2e Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 6 May 2013 15:11:11 -0600 Subject: clk: tegra: add ac97 controller clock AC97 controller clock is hardwired to pll_a_out0. Signed-off-by: Lucas Stach Acked-by: Peter De Schrijver Reviewed-by: Prashant Gaikwad Acked-by: Mike Turquette Tested-by: Stephen Warren Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- drivers/clk/tegra/clk-tegra20.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c index d80c7cc23581..075db0c99edb 100644 --- a/drivers/clk/tegra/clk-tegra20.c +++ b/drivers/clk/tegra/clk-tegra20.c @@ -872,6 +872,14 @@ static void __init tegra20_periph_clk_init(void) struct clk *clk; int i; + /* ac97 */ + clk = tegra_clk_register_periph_gate("ac97", "pll_a_out0", + TEGRA_PERIPH_ON_APB, + clk_base, 0, 3, &periph_l_regs, + periph_clk_enb_refcnt); + clk_register_clkdev(clk, NULL, "tegra20-ac97"); + clks[ac97] = clk; + /* apbdma */ clk = tegra_clk_register_periph_gate("apbdma", "pclk", 0, clk_base, 0, 34, &periph_h_regs, -- cgit v1.2.3 From 9f8466c6e09e62a1d047f2e57d90cd42e46b35c1 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 17 May 2013 08:44:17 +0100 Subject: ARM: vt8500: Add missing NULL terminator in dt_compat When I tried booting a stih415 Dual core A9 with multi_v7_defconfig, it failed to boot. The issues seems to be changing by enabling or disabling VT8550 platform. Having a quick look at dt_compat list, it seems to miss a NULL terminator, which means of_flat_dt_match will compat check will cross the boundary of dt_compat and fault at some point , which is what was happening in my case. Without this patch if we try to boot multi_v7_defconfig you might notice that some of the platforms might fault if they fall after vt8500 in machine-desc list. Other platforms which fall before vt8500 in mdesc list will not fault. Signed-off-by: Srinivas Kandagatla Acked-by: Tony Prisk Signed-off-by: Olof Johansson --- arch/arm/mach-vt8500/vt8500.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 1dd281efc020..f5c33df7a597 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -173,6 +173,7 @@ static const char * const vt8500_dt_compat[] = { "wm,wm8505", "wm,wm8750", "wm,wm8850", + NULL }; DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)") -- cgit v1.2.3 From b98da4db297bad34a5577df36ff4cb2a8fc90923 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 19 May 2013 00:47:39 +0200 Subject: ARM: nomadik: fix IRQ assignment for SMC ethernet The assignment of IRQ for the SMC91x ethernet adapter had two problems making it non-working: - It was not put into the ethernet device node. Let's do this by using the board-specific overlay, so we can make other overlays on other Nomadik boards. - The IRQ number was actually completely wrong, this was the number for NHK8815, not S8815. After this ethernet starts working on the USB S8815. Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/boot/dts/ste-nomadik-s8815.dts | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index b28fbf3408e3..6f82d9368948 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -14,13 +14,19 @@ bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; }; + /* This is where the interrupt is routed on the S8815 board */ + external-bus@34000000 { + ethernet@300 { + interrupt-parent = <&gpio3>; + interrupts = <8 0x1>; + }; + }; + /* Custom board node with GPIO pins to active etc */ usb-s8815 { /* The S8815 is using this very GPIO pin for the SMSC91x IRQs */ ethernet-gpio { - gpios = <&gpio3 19 0x1>; - interrupts = <19 0x1>; - interrupt-parent = <&gpio3>; + gpios = <&gpio3 8 0x1>; }; /* This will bias the MMC/SD card detect line */ mmcsd-gpio { -- cgit v1.2.3 From 8d9849b05154ff6f19f538c2d094ea0f32981bb0 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Mon, 20 May 2013 13:07:19 -0600 Subject: ARM: tegra: defconfig fixes The AK8975 Kconfig option was renamed during the 3.10 merge window. Adjust tegra_defconfig to enable the new name, so it's not missing useful features. Tegra DRM support used to be enabled in the default Tegra configuration, but it now depends on CONFIG_TEGRA_HOST1X which is disabled by default. Enable CONFIG_TEGRA_HOST1X so that DRM support is compiled in again. Signed-off-by: Alexandre Courbot [swarren, squashed Alex's and my changes together] Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- arch/arm/configs/tegra_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index a5f0485133cf..f7ba316164d4 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -153,6 +153,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_DRM=y +CONFIG_TEGRA_HOST1X=y CONFIG_DRM_TEGRA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set @@ -202,7 +203,7 @@ CONFIG_TEGRA20_APB_DMA=y CONFIG_STAGING=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_ISL29028=y -CONFIG_SENSORS_AK8975=y +CONFIG_AK8975=y CONFIG_MFD_NVEC=y CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y -- cgit v1.2.3 From bbb013b9200f0d860d2b353d47cc7b9f8f75fc8b Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 12 May 2013 13:03:56 +0200 Subject: amd64_edac: Fix bogus sysfs file permissions Fix yet another issue caught by 8f46baaa7ec6c ("base: core: WARN() about bogus permissions on device attributes"). Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac_inj.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/edac/amd64_edac_inj.c b/drivers/edac/amd64_edac_inj.c index 8c171fa1cb9b..845f04786c2d 100644 --- a/drivers/edac/amd64_edac_inj.c +++ b/drivers/edac/amd64_edac_inj.c @@ -202,9 +202,9 @@ static DEVICE_ATTR(inject_word, S_IRUGO | S_IWUSR, amd64_inject_word_show, amd64_inject_word_store); static DEVICE_ATTR(inject_ecc_vector, S_IRUGO | S_IWUSR, amd64_inject_ecc_vector_show, amd64_inject_ecc_vector_store); -static DEVICE_ATTR(inject_write, S_IRUGO | S_IWUSR, +static DEVICE_ATTR(inject_write, S_IWUSR, NULL, amd64_inject_write_store); -static DEVICE_ATTR(inject_read, S_IRUGO | S_IWUSR, +static DEVICE_ATTR(inject_read, S_IWUSR, NULL, amd64_inject_read_store); -- cgit v1.2.3 From aa033810461ee56abbef6cef10aabd6b97f5caee Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 20 May 2013 17:57:16 -0700 Subject: ARM: smp: Drop RCU_NONIDLE usage in cpu_die() Before f7b861b7a6d9 ("arm: Use generic idle loop") ARM would kill the CPU within the rcu idle section. Now that the rcu_idle_enter()/exit() pair have been pushed lower down in the idle loop this is no longer true and so using RCU_NONIDLE here is no longer necessary and also harmful because RCU is not actually idle at this point. Cc: Russell King Acked-by: Paul E. McKenney Signed-off-by: Stephen Boyd Signed-off-by: Linus Torvalds --- arch/arm/kernel/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 47ab90563bf4..550d63cef68e 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -251,7 +251,7 @@ void __ref cpu_die(void) * this returns, power and/or clocks can be removed at any point * from this CPU and its cache by platform_cpu_kill(). */ - RCU_NONIDLE(complete(&cpu_died)); + complete(&cpu_died); /* * Ensure that the cache lines associated with that completion are -- cgit v1.2.3 From 1c04fc3536b9e6d143991a8c5c16b04866baeed6 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 10 May 2013 09:14:04 -0700 Subject: driver core: export subsys_virtual_register Modules want to call this function, so it needs to be exported. Reported-by: Daniel Mack Cc: Kay Sievers Cc: Tejun Heo Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 1a68f947ded8..d414331b480e 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -1295,6 +1295,7 @@ int subsys_virtual_register(struct bus_type *subsys, return subsys_register(subsys, groups, virtual_dir); } +EXPORT_SYMBOL_GPL(subsys_virtual_register); int __init buses_init(void) { -- cgit v1.2.3 From 97521978c5ea80857d4f4f74d4e1fc93721482cf Mon Sep 17 00:00:00 2001 From: "dyoung@redhat.com" Date: Thu, 16 May 2013 14:31:30 +0800 Subject: driver core: print sysfs attribute name when warning about bogus permissions Make it obvious to see what attribute is using bogus permissions. Signed-off-by: Dave Young Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index 016312437577..2499cefdcdf2 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -572,9 +572,11 @@ int device_create_file(struct device *dev, if (dev) { WARN(((attr->attr.mode & S_IWUGO) && !attr->store), - "Write permission without 'store'\n"); + "Attribute %s: write permission without 'store'\n", + attr->attr.name); WARN(((attr->attr.mode & S_IRUGO) && !attr->show), - "Read permission without 'show'\n"); + "Attribute %s: read permission without 'show'\n", + attr->attr.name); error = sysfs_create_file(&dev->kobj, &attr->attr); } -- cgit v1.2.3 From 46e0cd87d90056383c8b5408fb297f18c1bdddf3 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Tue, 7 May 2013 21:12:31 +0300 Subject: mei: fix out of array access to me clients array The patch 9f81abdac362: "mei: implement mei_cl_connect function" from Jan 8, 2013, leads to the following static checker warning: "drivers/misc/mei/main.c:522 mei_ioctl_connect_client() warn: check 'dev->me_clients[]' for negative offsets (-2)" Reported-by: Dan Carpenter Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/main.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index 7c44c8dbae42..053139f61086 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -489,11 +489,16 @@ static int mei_ioctl_connect_client(struct file *file, /* find ME client we're trying to connect to */ i = mei_me_cl_by_uuid(dev, &data->in_client_uuid); - if (i >= 0 && !dev->me_clients[i].props.fixed_address) { - cl->me_client_id = dev->me_clients[i].client_id; - cl->state = MEI_FILE_CONNECTING; + if (i < 0 || dev->me_clients[i].props.fixed_address) { + dev_dbg(&dev->pdev->dev, "Cannot connect to FW Client UUID = %pUl\n", + &data->in_client_uuid); + rets = -ENODEV; + goto end; } + cl->me_client_id = dev->me_clients[i].client_id; + cl->state = MEI_FILE_CONNECTING; + dev_dbg(&dev->pdev->dev, "Connect to FW Client ID = %d\n", cl->me_client_id); dev_dbg(&dev->pdev->dev, "FW Client - Protocol Version = %d\n", @@ -527,11 +532,6 @@ static int mei_ioctl_connect_client(struct file *file, goto end; } - if (cl->state != MEI_FILE_CONNECTING) { - rets = -ENODEV; - goto end; - } - /* prepare the output buffer */ client = &data->out_client_properties; @@ -543,7 +543,6 @@ static int mei_ioctl_connect_client(struct file *file, rets = mei_cl_connect(cl, file); end: - dev_dbg(&dev->pdev->dev, "free connect cb memory."); return rets; } -- cgit v1.2.3 From d2242a384355773c711a936522bcfae0f35f8c2a Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Fri, 17 May 2013 09:30:35 -0700 Subject: Drivers: hv: Fix a bug in get_vp_index() Linux' notion of cpuid is different from the Host's notion of CPUID. In the call to bind the channel interrupts, we should use the host's notion of CPU Ids. Fix this bug. Signed-off-by: K. Y. Srinivasan Cc: Stable (V3.9) Signed-off-by: Greg Kroah-Hartman --- drivers/hv/channel_mgmt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c index bad8128b283a..21ef68934a20 100644 --- a/drivers/hv/channel_mgmt.c +++ b/drivers/hv/channel_mgmt.c @@ -329,7 +329,7 @@ static u32 get_vp_index(uuid_le *type_guid) return 0; } cur_cpu = (++next_vp % max_cpus); - return cur_cpu; + return hv_context.vp_index[cur_cpu]; } /* -- cgit v1.2.3 From bbedf2fc207bbd89c109123caee7cf0497030762 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 21 May 2013 18:52:09 +0200 Subject: mei: bus: Reset event_cb when disabling a device After cancelling all reads from the disable hook, we need to reset the event_cb pointer as well or else we won't be able to set a new one up when re-enabling the device. Acked-by: Tomas Winkler Signed-off-by: Samuel Ortiz Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 1e935eacaa7f..9ecd49a7be1b 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -496,6 +496,8 @@ int mei_cl_disable_device(struct mei_cl_device *device) } } + device->event_cb = NULL; + mutex_unlock(&dev->device_lock); if (!device->ops || !device->ops->disable) -- cgit v1.2.3 From a4162747b79683b163d54cfd9c9319d9a8bad111 Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Thu, 9 May 2013 14:34:55 -0700 Subject: MAINTAINERS: update Hyper-V file list Signed-off-by: Haiyang Zhang Reviewed-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 3d7782b9f90d..8f190f5532ee 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3865,9 +3865,16 @@ M: K. Y. Srinivasan M: Haiyang Zhang L: devel@linuxdriverproject.org S: Maintained -F: drivers/hv/ +F: arch/x86/include/asm/mshyperv.h +F: arch/x86/include/uapi/asm/hyperv.h +F: arch/x86/kernel/cpu/mshyperv.c F: drivers/hid/hid-hyperv.c +F: drivers/hv/ F: drivers/net/hyperv/ +F: drivers/scsi/storvsc_drv.c +F: drivers/video/hyperv_fb.c +F: include/linux/hyperv.h +F: tools/hv/ I2C OVER PARALLEL PORT M: Jean Delvare -- cgit v1.2.3 From 89fb9e7c3423662f4969a1e8ef0f5d44835d2381 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 May 2013 23:04:51 +0200 Subject: uio: UIO_DMEM_GENIRQ should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `uio_dmem_genirq_release': drivers/uio/uio_dmem_genirq.c:95: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `uio_dmem_genirq_open': drivers/uio/uio_dmem_genirq.c:61: undefined reference to `dma_alloc_coherent' Signed-off-by: Geert Uytterhoeven Cc: Hans J. Koch Cc: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- drivers/uio/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig index e92eeaf251fe..5295be0342c1 100644 --- a/drivers/uio/Kconfig +++ b/drivers/uio/Kconfig @@ -45,6 +45,7 @@ config UIO_PDRV_GENIRQ config UIO_DMEM_GENIRQ tristate "Userspace platform driver with generic irq and dynamic memory" + depends on HAS_DMA help Platform driver for Userspace I/O devices, including generic interrupt handling code. Shared interrupts are not supported. -- cgit v1.2.3 From b5325a02aa84c794cf520d6d68cae4b150988a32 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Fri, 10 May 2013 15:40:13 -0700 Subject: ttyprintk: Fix NULL pointer deref by setting tty_port ops after initializing port tty_port_init() zeroes out the tty port, which means that we have to set the ops pointer /after/, not before this call. Otherwise, tty_port_open will crash when it tries to deref ops, which is now a NULL pointer. Signed-off-by: Darrick J. Wong Signed-off-by: Greg Kroah-Hartman --- drivers/char/ttyprintk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c index 4945bd3d18d0..d5d2e4a985aa 100644 --- a/drivers/char/ttyprintk.c +++ b/drivers/char/ttyprintk.c @@ -179,7 +179,6 @@ static int __init ttyprintk_init(void) { int ret = -ENOMEM; - tpk_port.port.ops = &null_ops; mutex_init(&tpk_port.port_write_mutex); ttyprintk_driver = tty_alloc_driver(1, @@ -190,6 +189,7 @@ static int __init ttyprintk_init(void) return PTR_ERR(ttyprintk_driver); tty_port_init(&tpk_port.port); + tpk_port.port.ops = &null_ops; ttyprintk_driver->driver_name = "ttyprintk"; ttyprintk_driver->name = "ttyprintk"; -- cgit v1.2.3 From ac5a2962b02f57dea76d314ef2521a2170b28ab6 Mon Sep 17 00:00:00 2001 From: "wang, biao" Date: Thu, 16 May 2013 09:50:13 +0800 Subject: klist: del waiter from klist_remove_waiters before wakeup waitting process There is a race between klist_remove and klist_release. klist_remove uses a local var waiter saved on stack. When klist_release calls wake_up_process(waiter->process) to wake up the waiter, waiter might run immediately and reuse the stack. Then, klist_release calls list_del(&waiter->list) to change previous wait data and cause prior waiter thread corrupt. The patch fixes it against kernel 3.9. Signed-off-by: wang, biao Acked-by: Peter Zijlstra Signed-off-by: Greg Kroah-Hartman --- lib/klist.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/klist.c b/lib/klist.c index 0874e41609a6..358a368a2947 100644 --- a/lib/klist.c +++ b/lib/klist.c @@ -193,10 +193,10 @@ static void klist_release(struct kref *kref) if (waiter->node != n) continue; + list_del(&waiter->list); waiter->woken = 1; mb(); wake_up_process(waiter->process); - list_del(&waiter->list); } spin_unlock(&klist_remove_lock); knode_set_klist(n, NULL); -- cgit v1.2.3 From 9d83e1807e6462ac5c4edb7eae96c69594e8c8ef Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Tue, 21 May 2013 09:34:24 +0300 Subject: serial: 8250_dw: add ACPI ID for Intel BayTrail This is the same controller as on Intel Lynxpoint but the ACPI ID is different. Signed-off-by: Heikki Krogerus Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dw.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 0b0eef900cad..d07b6af3a937 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -369,6 +369,7 @@ MODULE_DEVICE_TABLE(of, dw8250_of_match); static const struct acpi_device_id dw8250_acpi_match[] = { { "INT33C4", 0 }, { "INT33C5", 0 }, + { "80860F0A", 0 }, { }, }; MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match); -- cgit v1.2.3 From dfc7b837c7f9f01f76511aa3eeea35232903e58f Mon Sep 17 00:00:00 2001 From: "Matwey V. Kornilov" Date: Tue, 21 May 2013 13:57:37 +0400 Subject: tty: mxser: fix usage of opmode_ioaddr mxser_port->opmode_ioaddr is initialized only for MOXA_MUST_MU860_HWID chips, but no precautions have been undertaken to prevent reading and writing to undefined port number. Signed-off-by: Matwey V. Kornilov Signed-off-by: Greg Kroah-Hartman --- drivers/tty/mxser.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 71d6eb2c93b1..f97b196693c6 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -1618,8 +1618,12 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) if (ip->type == PORT_16550A) me->fifo[p] = 1; - opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2); - opmode &= OP_MODE_MASK; + if (ip->board->chip_flag == MOXA_MUST_MU860_HWID) { + opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2); + opmode &= OP_MODE_MASK; + } else { + opmode = RS232_MODE; + } me->iftype[p] = opmode; mutex_unlock(&port->mutex); } @@ -1670,6 +1674,9 @@ static int mxser_ioctl(struct tty_struct *tty, return mxser_ioctl_special(cmd, argp); if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) { + if (info->board->chip_flag != MOXA_MUST_MU860_HWID) + return -EFAULT; + int p; unsigned long opmode; static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f }; -- cgit v1.2.3 From 8c24d6ea12879a4880c5f9a514dd4c3b6575094a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 24 Apr 2013 20:43:59 +0200 Subject: staging: video: imx: Select VIDEOMODE_HELPERS for parallel display Without this, I get the following problem when building kernel: drivers/built-in.o: In function `imx_pd_connector_get_modes': /linux-2.6/drivers/staging/imx-drm/parallel-display.c:78: undefined reference to `of_get_drm_display_mode' make: *** [vmlinux] Error 1 Signed-off-by: Marek Vasut Cc: Sascha Hauer Cc: Philipp Zabel Cc: Fabio Estevam Acked-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/imx-drm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/imx-drm/Kconfig b/drivers/staging/imx-drm/Kconfig index 35ccda56fc2a..ef699f753186 100644 --- a/drivers/staging/imx-drm/Kconfig +++ b/drivers/staging/imx-drm/Kconfig @@ -20,6 +20,7 @@ config DRM_IMX_FB_HELPER config DRM_IMX_PARALLEL_DISPLAY tristate "Support for parallel displays" depends on DRM_IMX + select VIDEOMODE_HELPERS config DRM_IMX_TVE tristate "Support for TV and VGA displays" -- cgit v1.2.3 From c7b0cf3e712775e8e2015c2f4582864159540be6 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 21 May 2013 11:24:44 -0300 Subject: staging: imx-drm: imx-tve: Check the return value of 'regulator_enable()' Since commit c8801a8 (regulator: core: Mark all get and enable calls as __must_check) we need to check the value returned by 'regulator_enable()'. Do this check to get rid of the following build warning: drivers/staging/imx-drm/imx-tve.c: In function 'imx_tve_probe': drivers/staging/imx-drm/imx-tve.c:671:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: Fabio Estevam Acked-by: Shawn Guo Acked-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/imx-drm/imx-tve.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/staging/imx-drm/imx-tve.c b/drivers/staging/imx-drm/imx-tve.c index ac1634464407..03892de9bd7e 100644 --- a/drivers/staging/imx-drm/imx-tve.c +++ b/drivers/staging/imx-drm/imx-tve.c @@ -670,7 +670,9 @@ static int imx_tve_probe(struct platform_device *pdev) tve->dac_reg = devm_regulator_get(&pdev->dev, "dac"); if (!IS_ERR(tve->dac_reg)) { regulator_set_voltage(tve->dac_reg, 2750000, 2750000); - regulator_enable(tve->dac_reg); + ret = regulator_enable(tve->dac_reg); + if (ret) + return ret; } tve->clk = devm_clk_get(&pdev->dev, "tve"); -- cgit v1.2.3 From 803d19d57a042e86e9e9b685bbc3f4a0a751040f Mon Sep 17 00:00:00 2001 From: Timo Teräs Date: Fri, 17 May 2013 00:48:39 -0700 Subject: leds: leds-gpio: reserve gpio before using it MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit a99d76f (leds: leds-gpio: use gpio_request_one) and commit 2d7c22f (leds: leds-gpio: set devm_gpio_request_one() flags param correctly) which was a fix of the first one. The conversion to devm_gpio_request in commit e3b1d44c (leds: leds-gpio: use devm_gpio_request_one) is not reverted. The problem is that gpio_cansleep() and gpio_get_value_cansleep() calls can crash if the gpio is not first reserved. Incidentally this same bug existed earlier and was fixed similarly in commit d95cbe61 (leds: Fix potential leds-gpio oops). But the OOPS is real. It happens when GPIOs are provided by module which is not yet loaded. So this fixes the following BUG during my ALIX boot (3.9.2-vanilla): BUG: unable to handle kernel NULL pointer dereference at 0000004c IP: [] __gpio_cansleep+0xe/0x1a *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: leds_gpio(+) via_rhine mii cs5535_mfd mfd_core geode_rng rng_core geode_aes isofs nls_utf8 nls_cp437 vfat fat ata_generic pata_amd pata_cs5536 pata_acpi libata ehci_pci ehci_hcd ohci_hcd usb_storage usbcore usb_common sd_mod scsi_mod squashfs loop Pid: 881, comm: modprobe Not tainted 3.9.2 #1-Alpine EIP: 0060:[] EFLAGS: 00010282 CPU: 0 EIP is at __gpio_cansleep+0xe/0x1a EAX: 00000000 EBX: cf364018 ECX: c132b8b9 EDX: 00000000 ESI: c13993a4 EDI: c1399370 EBP: cded9dbc ESP: cded9dbc DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: 0000004c CR3: 0f0c4000 CR4: 00000090 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process modprobe (pid: 881, ti=cded8000 task=cf094aa0 task.ti=cded8000) Stack: cded9de0 d09471cb 00000000 c1399260 cf364014 00000000 c1399260 c1399254 d0949014 cded9df4 c118cd59 c1399260 d0949014 d0949014 cded9e08 c118ba47 c1399260 d0949014 c1399294 cded9e1c c118bb75 cded9e24 d0949014 00000000 Call Trace: [] gpio_led_probe+0xba/0x203 [leds_gpio] [] platform_drv_probe+0x26/0x48 [] driver_probe_device+0x75/0x15c [] __driver_attach+0x47/0x63 [] bus_for_each_dev+0x3c/0x66 [] driver_attach+0x14/0x16 [] ? driver_probe_device+0x15c/0x15c [] bus_add_driver+0xbd/0x1bc [] ? 0xd08b3fff [] ? 0xd08b3fff [] driver_register+0x74/0xec [] ? 0xd08b3fff [] platform_driver_register+0x38/0x3a [] gpio_led_driver_init+0xd/0x1000 [leds_gpio] [] do_one_initcall+0x6b/0x10f [] ? 0xd08b3fff [] load_module+0x1631/0x1907 [] ? insert_vmalloc_vmlist+0x14/0x43 [] ? __vmalloc_node_range+0x13e/0x15f [] sys_init_module+0x62/0x77 [] syscall_call+0x7/0xb EIP: [] __gpio_cansleep+0xe/0x1a SS:ESP 0068:cded9dbc CR2: 000000000000004c ---[ end trace 5308fb20d2514822 ]--- Signed-off-by: Timo Teräs Cc: Sachin Kamat Cc: Raphael Assenat Cc: Trent Piepho Cc: Javier Martinez Canillas Cc: Arnaud Patard Cc: Ezequiel Garcia Acked-by: Jingoo Han Signed-off-by: Bryan Wu --- drivers/leds/leds-gpio.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c index a0d931bcb37c..b02b679abf31 100644 --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c @@ -107,6 +107,10 @@ static int create_gpio_led(const struct gpio_led *template, return 0; } + ret = devm_gpio_request(parent, template->gpio, template->name); + if (ret < 0) + return ret; + led_dat->cdev.name = template->name; led_dat->cdev.default_trigger = template->default_trigger; led_dat->gpio = template->gpio; @@ -126,10 +130,7 @@ static int create_gpio_led(const struct gpio_led *template, if (!template->retain_state_suspended) led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; - ret = devm_gpio_request_one(parent, template->gpio, - (led_dat->active_low ^ state) ? - GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, - template->name); + ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state); if (ret < 0) return ret; -- cgit v1.2.3 From f69ae770e74df420fbcf93aae81b30a5dcc73b7d Mon Sep 17 00:00:00 2001 From: Martin Hundebøll Date: Wed, 17 Apr 2013 21:13:16 +0200 Subject: batman-adv: Avoid double freeing of bat_counters MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On errors in batadv_mesh_init(), bat_counters will be freed in both batadv_mesh_free() and batadv_softif_init_late(). This patch fixes this by returning earlier from batadv_softif_init_late() in case of errors in batadv_mesh_init() and by setting bat_counters to NULL after freeing. Signed-off-by: Martin Hundebøll Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli --- net/batman-adv/main.c | 1 + net/batman-adv/soft-interface.c | 1 + 2 files changed, 2 insertions(+) diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c index 1240f07ad31d..51aafd669cbb 100644 --- a/net/batman-adv/main.c +++ b/net/batman-adv/main.c @@ -181,6 +181,7 @@ void batadv_mesh_free(struct net_device *soft_iface) batadv_originator_free(bat_priv); free_percpu(bat_priv->bat_counters); + bat_priv->bat_counters = NULL; atomic_set(&bat_priv->mesh_state, BATADV_MESH_INACTIVE); } diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index 6f20d339e33a..819dfb006cdf 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -505,6 +505,7 @@ unreg_debugfs: batadv_debugfs_del_meshif(dev); free_bat_counters: free_percpu(bat_priv->bat_counters); + bat_priv->bat_counters = NULL; return ret; } -- cgit v1.2.3 From 5649d8f9e335f2b093751fcc2bdd5953f79f66ef Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Fri, 26 Apr 2013 14:17:18 +0200 Subject: mfd: ab8500-sysctrl: Let sysctrl driver work without pdata A check for a valid plat->sysctrl was introduced in: 2377e52 mfd: ab8500-sysctrl: Error check clean up but the driver works just fine even without that initialization data, and enforcing it breaks existing platforms for no reason. This patch removes the check and let the driver go ahead with probe. Acked-by: Linus Walleij Signed-off-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-sysctrl.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index 0c20361eae26..8e0dae59844d 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -104,7 +104,7 @@ void ab8500_restart(char mode, const char *cmd) plat = dev_get_platdata(sysctrl_dev->parent); pdata = plat->sysctrl; - if (pdata->reboot_reason_code) + if (pdata && pdata->reboot_reason_code) reason = pdata->reboot_reason_code(cmd); else pr_warn("[%s] No reboot reason set. Default reason %d\n", @@ -188,7 +188,7 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev) plat = dev_get_platdata(pdev->dev.parent); - if (!(plat && plat->sysctrl)) + if (!plat) return -EINVAL; sysctrl_dev = &pdev->dev; @@ -197,7 +197,6 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev) pm_power_off = ab8500_power_off; pdata = plat->sysctrl; - if (pdata) { int last, ret, i, j; -- cgit v1.2.3 From ec4602a9588a196fa1a9af46bfdd37cbf5792db4 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 16 May 2013 22:29:28 +0200 Subject: ACPI / PM: Allow device power states to be used for CONFIG_PM unset Currently, drivers/acpi/device_pm.c depends on CONFIG_PM and all of the functions defined in there are replaced with static inline stubs if that option is unset. However, CONFIG_PM means, roughly, "runtime PM or suspend/hibernation support" and some of those functions are useful regardless of that. For example, they are used by the ACPI fan driver for controlling fans and acpi_device_set_power() is called during device removal. Moreover, device initialization may depend on setting device power states properly. For these reasons, make the routines manipulating ACPI device power states defined in drivers/acpi/device_pm.c available for CONFIG_PM unset too. Reported-by: Zhang Rui Reported-and-tested-by: Michel Lespinasse Signed-off-by: Rafael J. Wysocki Cc: 3.9+ --- drivers/acpi/Makefile | 2 +- drivers/acpi/device_pm.c | 126 ++++++++++++++++++++++++----------------------- include/acpi/acpi_bus.h | 40 ++------------- 3 files changed, 70 insertions(+), 98 deletions(-) diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index ecb743bf05a5..7cad994ee44f 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -24,7 +24,7 @@ acpi-y += nvs.o # Power management related files acpi-y += wakeup.o acpi-y += sleep.o -acpi-$(CONFIG_PM) += device_pm.o +acpi-y += device_pm.o acpi-$(CONFIG_ACPI_SLEEP) += proc.o diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 96de787e6104..bc493aa3af19 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -37,68 +37,6 @@ #define _COMPONENT ACPI_POWER_COMPONENT ACPI_MODULE_NAME("device_pm"); -static DEFINE_MUTEX(acpi_pm_notifier_lock); - -/** - * acpi_add_pm_notifier - Register PM notifier for given ACPI device. - * @adev: ACPI device to add the notifier for. - * @context: Context information to pass to the notifier routine. - * - * NOTE: @adev need not be a run-wake or wakeup device to be a valid source of - * PM wakeup events. For example, wakeup events may be generated for bridges - * if one of the devices below the bridge is signaling wakeup, even if the - * bridge itself doesn't have a wakeup GPE associated with it. - */ -acpi_status acpi_add_pm_notifier(struct acpi_device *adev, - acpi_notify_handler handler, void *context) -{ - acpi_status status = AE_ALREADY_EXISTS; - - mutex_lock(&acpi_pm_notifier_lock); - - if (adev->wakeup.flags.notifier_present) - goto out; - - status = acpi_install_notify_handler(adev->handle, - ACPI_SYSTEM_NOTIFY, - handler, context); - if (ACPI_FAILURE(status)) - goto out; - - adev->wakeup.flags.notifier_present = true; - - out: - mutex_unlock(&acpi_pm_notifier_lock); - return status; -} - -/** - * acpi_remove_pm_notifier - Unregister PM notifier from given ACPI device. - * @adev: ACPI device to remove the notifier from. - */ -acpi_status acpi_remove_pm_notifier(struct acpi_device *adev, - acpi_notify_handler handler) -{ - acpi_status status = AE_BAD_PARAMETER; - - mutex_lock(&acpi_pm_notifier_lock); - - if (!adev->wakeup.flags.notifier_present) - goto out; - - status = acpi_remove_notify_handler(adev->handle, - ACPI_SYSTEM_NOTIFY, - handler); - if (ACPI_FAILURE(status)) - goto out; - - adev->wakeup.flags.notifier_present = false; - - out: - mutex_unlock(&acpi_pm_notifier_lock); - return status; -} - /** * acpi_power_state_string - String representation of ACPI device power state. * @state: ACPI device power state to return the string representation of. @@ -385,6 +323,69 @@ bool acpi_bus_power_manageable(acpi_handle handle) } EXPORT_SYMBOL(acpi_bus_power_manageable); +#ifdef CONFIG_PM +static DEFINE_MUTEX(acpi_pm_notifier_lock); + +/** + * acpi_add_pm_notifier - Register PM notifier for given ACPI device. + * @adev: ACPI device to add the notifier for. + * @context: Context information to pass to the notifier routine. + * + * NOTE: @adev need not be a run-wake or wakeup device to be a valid source of + * PM wakeup events. For example, wakeup events may be generated for bridges + * if one of the devices below the bridge is signaling wakeup, even if the + * bridge itself doesn't have a wakeup GPE associated with it. + */ +acpi_status acpi_add_pm_notifier(struct acpi_device *adev, + acpi_notify_handler handler, void *context) +{ + acpi_status status = AE_ALREADY_EXISTS; + + mutex_lock(&acpi_pm_notifier_lock); + + if (adev->wakeup.flags.notifier_present) + goto out; + + status = acpi_install_notify_handler(adev->handle, + ACPI_SYSTEM_NOTIFY, + handler, context); + if (ACPI_FAILURE(status)) + goto out; + + adev->wakeup.flags.notifier_present = true; + + out: + mutex_unlock(&acpi_pm_notifier_lock); + return status; +} + +/** + * acpi_remove_pm_notifier - Unregister PM notifier from given ACPI device. + * @adev: ACPI device to remove the notifier from. + */ +acpi_status acpi_remove_pm_notifier(struct acpi_device *adev, + acpi_notify_handler handler) +{ + acpi_status status = AE_BAD_PARAMETER; + + mutex_lock(&acpi_pm_notifier_lock); + + if (!adev->wakeup.flags.notifier_present) + goto out; + + status = acpi_remove_notify_handler(adev->handle, + ACPI_SYSTEM_NOTIFY, + handler); + if (ACPI_FAILURE(status)) + goto out; + + adev->wakeup.flags.notifier_present = false; + + out: + mutex_unlock(&acpi_pm_notifier_lock); + return status; +} + bool acpi_bus_can_wakeup(acpi_handle handle) { struct acpi_device *device; @@ -1023,3 +1024,4 @@ void acpi_dev_pm_remove_dependent(acpi_handle handle, struct device *depdev) mutex_unlock(&adev->physical_node_lock); } EXPORT_SYMBOL_GPL(acpi_dev_pm_remove_dependent); +#endif /* CONFIG_PM */ diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 98db31d9f9b4..636c59f2003a 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -377,7 +377,6 @@ acpi_status acpi_bus_get_status_handle(acpi_handle handle, unsigned long long *sta); int acpi_bus_get_status(struct acpi_device *device); -#ifdef CONFIG_PM int acpi_bus_set_power(acpi_handle handle, int state); const char *acpi_power_state_string(int state); int acpi_device_get_power(struct acpi_device *device, int *state); @@ -385,41 +384,12 @@ int acpi_device_set_power(struct acpi_device *device, int state); int acpi_bus_init_power(struct acpi_device *device); int acpi_bus_update_power(acpi_handle handle, int *state_p); bool acpi_bus_power_manageable(acpi_handle handle); + +#ifdef CONFIG_PM bool acpi_bus_can_wakeup(acpi_handle handle); -#else /* !CONFIG_PM */ -static inline int acpi_bus_set_power(acpi_handle handle, int state) -{ - return 0; -} -static inline const char *acpi_power_state_string(int state) -{ - return "D0"; -} -static inline int acpi_device_get_power(struct acpi_device *device, int *state) -{ - return 0; -} -static inline int acpi_device_set_power(struct acpi_device *device, int state) -{ - return 0; -} -static inline int acpi_bus_init_power(struct acpi_device *device) -{ - return 0; -} -static inline int acpi_bus_update_power(acpi_handle handle, int *state_p) -{ - return 0; -} -static inline bool acpi_bus_power_manageable(acpi_handle handle) -{ - return false; -} -static inline bool acpi_bus_can_wakeup(acpi_handle handle) -{ - return false; -} -#endif /* !CONFIG_PM */ +#else +static inline bool acpi_bus_can_wakeup(acpi_handle handle) { return false; } +#endif #ifdef CONFIG_ACPI_PROC_EVENT int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data); -- cgit v1.2.3 From 955ef4833574636819cd269cfbae12f79cbde63a Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 16 May 2013 05:09:58 +0000 Subject: cpufreq: Drop rwsem lock around CPUFREQ_GOV_POLICY_EXIT With the rwsem lock around __cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT), we get circular dependency when we call sysfs_remove_group(). ====================================================== [ INFO: possible circular locking dependency detected ] 3.9.0-rc7+ #15 Not tainted ------------------------------------------------------- cat/2387 is trying to acquire lock: (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}, at: [] lock_policy_rwsem_read+0x25/0x34 but task is already holding lock: (s_active#41){++++.+}, at: [] sysfs_read_file+0x4f/0xcc which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (s_active#41){++++.+}: [] lock_acquire+0x61/0xbc [] sysfs_addrm_finish+0xc1/0x128 [] sysfs_hash_and_remove+0x35/0x64 [] remove_files.isra.0+0x1b/0x24 [] sysfs_remove_group+0x2d/0xa8 [] cpufreq_governor_interactive+0x13b/0x35c [] __cpufreq_governor+0x2b/0x8c [] __cpufreq_set_policy+0xa9/0xf8 [] store_scaling_governor+0x61/0x100 [] store+0x39/0x60 [] sysfs_write_file+0xed/0x114 [] vfs_write+0x65/0xd8 [] sys_write+0x2f/0x50 [] ret_fast_syscall+0x1/0x52 -> #0 (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}: [] __lock_acquire+0xef3/0x13dc [] lock_acquire+0x61/0xbc [] down_read+0x25/0x30 [] lock_policy_rwsem_read+0x25/0x34 [] show+0x21/0x58 [] sysfs_read_file+0x67/0xcc [] vfs_read+0x63/0xd8 [] sys_read+0x2f/0x50 [] ret_fast_syscall+0x1/0x52 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(s_active#41); lock(&per_cpu(cpu_policy_rwsem, cpu)); lock(s_active#41); lock(&per_cpu(cpu_policy_rwsem, cpu)); *** DEADLOCK *** 2 locks held by cat/2387: #0: (&buffer->mutex){+.+.+.}, at: [] sysfs_read_file+0x25/0xcc #1: (s_active#41){++++.+}, at: [] sysfs_read_file+0x4f/0xcc stack backtrace: [] (unwind_backtrace+0x1/0x9c) from [] (print_circular_bug+0x19d/0x1e8) [] (print_circular_bug+0x19d/0x1e8) from [] (__lock_acquire+0xef3/0x13dc) [] (__lock_acquire+0xef3/0x13dc) from [] (lock_acquire+0x61/0xbc) [] (lock_acquire+0x61/0xbc) from [] (down_read+0x25/0x30) [] (down_read+0x25/0x30) from [] (lock_policy_rwsem_read+0x25/0x34) [] (lock_policy_rwsem_read+0x25/0x34) from [] (show+0x21/0x58) [] (show+0x21/0x58) from [] (sysfs_read_file+0x67/0xcc) [] (sysfs_read_file+0x67/0xcc) from [] (vfs_read+0x63/0xd8) [] (vfs_read+0x63/0xd8) from [] (sys_read+0x2f/0x50) [] (sys_read+0x2f/0x50) from [] (ret_fast_syscall+0x1/0x52) This lock isn't required while calling __cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT). Remove it. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 4b8c7f297d74..2d53f47d1747 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1729,18 +1729,23 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data, /* end old governor */ if (data->governor) { __cpufreq_governor(data, CPUFREQ_GOV_STOP); + unlock_policy_rwsem_write(policy->cpu); __cpufreq_governor(data, CPUFREQ_GOV_POLICY_EXIT); + lock_policy_rwsem_write(policy->cpu); } /* start new governor */ data->governor = policy->governor; if (!__cpufreq_governor(data, CPUFREQ_GOV_POLICY_INIT)) { - if (!__cpufreq_governor(data, CPUFREQ_GOV_START)) + if (!__cpufreq_governor(data, CPUFREQ_GOV_START)) { failed = 0; - else + } else { + unlock_policy_rwsem_write(policy->cpu); __cpufreq_governor(data, CPUFREQ_GOV_POLICY_EXIT); + lock_policy_rwsem_write(policy->cpu); + } } if (failed) { -- cgit v1.2.3 From c96d53d600643ee0adfd1cb90814bd9510e62b71 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Fri, 17 May 2013 16:10:24 +0000 Subject: cpufreq / intel_pstate: Add additional supported CPU ID Add CPU ID for Ivybrigde processor. Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 9c36ace92a39..07f2840ad805 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -521,6 +521,7 @@ static void intel_pstate_timer_func(unsigned long __data) static const struct x86_cpu_id intel_pstate_cpu_ids[] = { ICPU(0x2a, default_policy), ICPU(0x2d, default_policy), + ICPU(0x3a, default_policy), {} }; MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids); -- cgit v1.2.3 From 154c2670087bd7f54688274aca627433e4a7c181 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 10:51:10 +0200 Subject: Add include dependencies to . MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If has not been included before , a build error like the below one will result: CC arch/mips/kernel/idle.o In file included from arch/mips/kernel/idle.c:17:0: include/linux/printk.h:109:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:109:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:110:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:110:1: error: expected ‘,’ or ‘;’ before ‘int’ include/linux/printk.h:114:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:114:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:115:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:115:1: error: expected ‘,’ or ‘;’ before ‘int’ include/linux/printk.h:117:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:117:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:118:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:118:1: error: ‘__cold__’ attribute ignored [-Werror=attributes] include/linux/printk.h:118:1: error: expected ‘,’ or ‘;’ before ‘asmlinkage’ include/linux/printk.h:122:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:122:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:123:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:123:1: error: ‘__cold__’ attribute ignored [-Werror=attributes] include/linux/printk.h:123:1: error: expected ‘,’ or ‘;’ before ‘int’ In file included from include/linux/kernel.h:14:0, from include/linux/sched.h:15, from arch/mips/kernel/idle.c:18: include/linux/dynamic_debug.h: In function ‘ddebug_dyndbg_module_param_cb’: include/linux/dynamic_debug.h:124:3: error: implicit declaration of function ‘printk’ [-Werror=implicit-function-declaration] Fixed by including . Signed-off-by: Ralf Baechle --- include/linux/printk.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/printk.h b/include/linux/printk.h index 6af944ab38f0..22c7052e9372 100644 --- a/include/linux/printk.h +++ b/include/linux/printk.h @@ -4,6 +4,7 @@ #include #include #include +#include extern const char linux_banner[]; extern const char linux_proc_banner[]; -- cgit v1.2.3 From 1a461c5bdcc815280fa5f51e3775bc05ed98af13 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 16:26:22 +0200 Subject: MIPS: clock.h: Remove declaration of cpu_wait. Duplicate and has no business in this header file. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/clock.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/mips/include/asm/clock.h b/arch/mips/include/asm/clock.h index c9456e7a7283..778e32d817bc 100644 --- a/arch/mips/include/asm/clock.h +++ b/arch/mips/include/asm/clock.h @@ -6,8 +6,6 @@ #include #include -extern void (*cpu_wait) (void); - struct clk; struct clk_ops { -- cgit v1.2.3 From 49f2ec91e14ce9bb20fdac88a38243129f3261c3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 10:53:37 +0200 Subject: MIPS: Consolidate idle loop / WAIT instruction support in a single file. Signed-off-by: Ralf Baechle --- arch/mips/kernel/Makefile | 2 +- arch/mips/kernel/cpu-probe.c | 198 ------------------------------------ arch/mips/kernel/idle.c | 232 +++++++++++++++++++++++++++++++++++++++++++ arch/mips/kernel/process.c | 13 --- 4 files changed, 233 insertions(+), 212 deletions(-) create mode 100644 arch/mips/kernel/idle.c diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 6ad9e04bdf62..423d871a946b 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -4,7 +4,7 @@ extra-y := head.o vmlinux.lds -obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ +obj-y += cpu-probe.o branch.o entry.o genex.o idle.o irq.o process.o \ prom.o ptrace.o reset.o setup.o signal.o syscall.o \ time.o topology.o traps.o unaligned.o watch.o vdso.o diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 4bbffdb9024f..c6568bf4b1b0 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -27,105 +27,6 @@ #include #include -/* - * Not all of the MIPS CPUs have the "wait" instruction available. Moreover, - * the implementation of the "wait" feature differs between CPU families. This - * points to the function that implements CPU specific wait. - * The wait instruction stops the pipeline and reduces the power consumption of - * the CPU very much. - */ -void (*cpu_wait)(void); -EXPORT_SYMBOL(cpu_wait); - -static void r3081_wait(void) -{ - unsigned long cfg = read_c0_conf(); - write_c0_conf(cfg | R30XX_CONF_HALT); -} - -static void r39xx_wait(void) -{ - local_irq_disable(); - if (!need_resched()) - write_c0_conf(read_c0_conf() | TX39_CONF_HALT); - local_irq_enable(); -} - -extern void r4k_wait(void); - -/* - * This variant is preferable as it allows testing need_resched and going to - * sleep depending on the outcome atomically. Unfortunately the "It is - * implementation-dependent whether the pipeline restarts when a non-enabled - * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes - * using this version a gamble. - */ -void r4k_wait_irqoff(void) -{ - local_irq_disable(); - if (!need_resched()) - __asm__(" .set push \n" - " .set mips3 \n" - " wait \n" - " .set pop \n"); - local_irq_enable(); - __asm__(" .globl __pastwait \n" - "__pastwait: \n"); -} - -/* - * The RM7000 variant has to handle erratum 38. The workaround is to not - * have any pending stores when the WAIT instruction is executed. - */ -static void rm7k_wait_irqoff(void) -{ - local_irq_disable(); - if (!need_resched()) - __asm__( - " .set push \n" - " .set mips3 \n" - " .set noat \n" - " mfc0 $1, $12 \n" - " sync \n" - " mtc0 $1, $12 # stalls until W stage \n" - " wait \n" - " mtc0 $1, $12 # stalls until W stage \n" - " .set pop \n"); - local_irq_enable(); -} - -/* - * The Au1xxx wait is available only if using 32khz counter or - * external timer source, but specifically not CP0 Counter. - * alchemy/common/time.c may override cpu_wait! - */ -static void au1k_wait(void) -{ - __asm__(" .set mips3 \n" - " cache 0x14, 0(%0) \n" - " cache 0x14, 32(%0) \n" - " sync \n" - " nop \n" - " wait \n" - " nop \n" - " nop \n" - " nop \n" - " nop \n" - " .set mips0 \n" - : : "r" (au1k_wait)); -} - -static int __initdata nowait; - -static int __init wait_disable(char *s) -{ - nowait = 1; - - return 1; -} - -__setup("nowait", wait_disable); - static int __cpuinitdata mips_fpu_disabled; static int __init fpu_disable(char *s) @@ -150,105 +51,6 @@ static int __init dsp_disable(char *s) __setup("nodsp", dsp_disable); -void __init check_wait(void) -{ - struct cpuinfo_mips *c = ¤t_cpu_data; - - if (nowait) { - printk("Wait instruction disabled.\n"); - return; - } - - switch (c->cputype) { - case CPU_R3081: - case CPU_R3081E: - cpu_wait = r3081_wait; - break; - case CPU_TX3927: - cpu_wait = r39xx_wait; - break; - case CPU_R4200: -/* case CPU_R4300: */ - case CPU_R4600: - case CPU_R4640: - case CPU_R4650: - case CPU_R4700: - case CPU_R5000: - case CPU_R5500: - case CPU_NEVADA: - case CPU_4KC: - case CPU_4KEC: - case CPU_4KSC: - case CPU_5KC: - case CPU_25KF: - case CPU_PR4450: - case CPU_BMIPS3300: - case CPU_BMIPS4350: - case CPU_BMIPS4380: - case CPU_BMIPS5000: - case CPU_CAVIUM_OCTEON: - case CPU_CAVIUM_OCTEON_PLUS: - case CPU_CAVIUM_OCTEON2: - case CPU_JZRISC: - case CPU_LOONGSON1: - case CPU_XLR: - case CPU_XLP: - cpu_wait = r4k_wait; - break; - - case CPU_RM7000: - cpu_wait = rm7k_wait_irqoff; - break; - - case CPU_M14KC: - case CPU_M14KEC: - case CPU_24K: - case CPU_34K: - case CPU_1004K: - cpu_wait = r4k_wait; - if (read_c0_config7() & MIPS_CONF7_WII) - cpu_wait = r4k_wait_irqoff; - break; - - case CPU_74K: - cpu_wait = r4k_wait; - if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0)) - cpu_wait = r4k_wait_irqoff; - break; - - case CPU_TX49XX: - cpu_wait = r4k_wait_irqoff; - break; - case CPU_ALCHEMY: - cpu_wait = au1k_wait; - break; - case CPU_20KC: - /* - * WAIT on Rev1.0 has E1, E2, E3 and E16. - * WAIT on Rev2.0 and Rev3.0 has E16. - * Rev3.1 WAIT is nop, why bother - */ - if ((c->processor_id & 0xff) <= 0x64) - break; - - /* - * Another rev is incremeting c0_count at a reduced clock - * rate while in WAIT mode. So we basically have the choice - * between using the cp0 timer as clocksource or avoiding - * the WAIT instruction. Until more details are known, - * disable the use of WAIT for 20Kc entirely. - cpu_wait = r4k_wait; - */ - break; - case CPU_RM9000: - if ((c->processor_id & 0x00ff) >= 0x40) - cpu_wait = r4k_wait; - break; - default: - break; - } -} - static inline void check_errata(void) { struct cpuinfo_mips *c = ¤t_cpu_data; diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c new file mode 100644 index 000000000000..1e9d9383d49f --- /dev/null +++ b/arch/mips/kernel/idle.c @@ -0,0 +1,232 @@ +/* + * MIPS idle loop and WAIT instruction support. + * + * Copyright (C) xxxx the Anonymous + * Copyright (C) 1994 - 2006 Ralf Baechle + * Copyright (C) 2003, 2004 Maciej W. Rozycki + * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Not all of the MIPS CPUs have the "wait" instruction available. Moreover, + * the implementation of the "wait" feature differs between CPU families. This + * points to the function that implements CPU specific wait. + * The wait instruction stops the pipeline and reduces the power consumption of + * the CPU very much. + */ +void (*cpu_wait)(void); +EXPORT_SYMBOL(cpu_wait); + +static void r3081_wait(void) +{ + unsigned long cfg = read_c0_conf(); + write_c0_conf(cfg | R30XX_CONF_HALT); +} + +static void r39xx_wait(void) +{ + local_irq_disable(); + if (!need_resched()) + write_c0_conf(read_c0_conf() | TX39_CONF_HALT); + local_irq_enable(); +} + +extern void r4k_wait(void); + +/* + * This variant is preferable as it allows testing need_resched and going to + * sleep depending on the outcome atomically. Unfortunately the "It is + * implementation-dependent whether the pipeline restarts when a non-enabled + * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes + * using this version a gamble. + */ +void r4k_wait_irqoff(void) +{ + local_irq_disable(); + if (!need_resched()) + __asm__(" .set push \n" + " .set mips3 \n" + " wait \n" + " .set pop \n"); + local_irq_enable(); + __asm__(" .globl __pastwait \n" + "__pastwait: \n"); +} + +/* + * The RM7000 variant has to handle erratum 38. The workaround is to not + * have any pending stores when the WAIT instruction is executed. + */ +static void rm7k_wait_irqoff(void) +{ + local_irq_disable(); + if (!need_resched()) + __asm__( + " .set push \n" + " .set mips3 \n" + " .set noat \n" + " mfc0 $1, $12 \n" + " sync \n" + " mtc0 $1, $12 # stalls until W stage \n" + " wait \n" + " mtc0 $1, $12 # stalls until W stage \n" + " .set pop \n"); + local_irq_enable(); +} + +/* + * The Au1xxx wait is available only if using 32khz counter or + * external timer source, but specifically not CP0 Counter. + * alchemy/common/time.c may override cpu_wait! + */ +static void au1k_wait(void) +{ + __asm__(" .set mips3 \n" + " cache 0x14, 0(%0) \n" + " cache 0x14, 32(%0) \n" + " sync \n" + " nop \n" + " wait \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + " .set mips0 \n" + : : "r" (au1k_wait)); +} + +static int __initdata nowait; + +static int __init wait_disable(char *s) +{ + nowait = 1; + + return 1; +} + +__setup("nowait", wait_disable); + +void __init check_wait(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + + if (nowait) { + printk("Wait instruction disabled.\n"); + return; + } + + switch (c->cputype) { + case CPU_R3081: + case CPU_R3081E: + cpu_wait = r3081_wait; + break; + case CPU_TX3927: + cpu_wait = r39xx_wait; + break; + case CPU_R4200: +/* case CPU_R4300: */ + case CPU_R4600: + case CPU_R4640: + case CPU_R4650: + case CPU_R4700: + case CPU_R5000: + case CPU_R5500: + case CPU_NEVADA: + case CPU_4KC: + case CPU_4KEC: + case CPU_4KSC: + case CPU_5KC: + case CPU_25KF: + case CPU_PR4450: + case CPU_BMIPS3300: + case CPU_BMIPS4350: + case CPU_BMIPS4380: + case CPU_BMIPS5000: + case CPU_CAVIUM_OCTEON: + case CPU_CAVIUM_OCTEON_PLUS: + case CPU_CAVIUM_OCTEON2: + case CPU_JZRISC: + case CPU_LOONGSON1: + case CPU_XLR: + case CPU_XLP: + cpu_wait = r4k_wait; + break; + + case CPU_RM7000: + cpu_wait = rm7k_wait_irqoff; + break; + + case CPU_M14KC: + case CPU_M14KEC: + case CPU_24K: + case CPU_34K: + case CPU_1004K: + cpu_wait = r4k_wait; + if (read_c0_config7() & MIPS_CONF7_WII) + cpu_wait = r4k_wait_irqoff; + break; + + case CPU_74K: + cpu_wait = r4k_wait; + if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0)) + cpu_wait = r4k_wait_irqoff; + break; + + case CPU_TX49XX: + cpu_wait = r4k_wait_irqoff; + break; + case CPU_ALCHEMY: + cpu_wait = au1k_wait; + break; + case CPU_20KC: + /* + * WAIT on Rev1.0 has E1, E2, E3 and E16. + * WAIT on Rev2.0 and Rev3.0 has E16. + * Rev3.1 WAIT is nop, why bother + */ + if ((c->processor_id & 0xff) <= 0x64) + break; + + /* + * Another rev is incremeting c0_count at a reduced clock + * rate while in WAIT mode. So we basically have the choice + * between using the cp0 timer as clocksource or avoiding + * the WAIT instruction. Until more details are known, + * disable the use of WAIT for 20Kc entirely. + cpu_wait = r4k_wait; + */ + break; + case CPU_RM9000: + if ((c->processor_id & 0x00ff) >= 0x40) + cpu_wait = r4k_wait; + break; + default: + break; + } +} + +void arch_cpu_idle(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + extern void smtc_idle_loop_hook(void); + + smtc_idle_loop_hook(); +#endif + if (cpu_wait) + (*cpu_wait)(); + else + local_irq_enable(); +} diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index a682a87bcc04..c6a041d9d05d 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -51,19 +51,6 @@ void arch_cpu_idle_dead(void) } #endif -void arch_cpu_idle(void) -{ -#ifdef CONFIG_MIPS_MT_SMTC - extern void smtc_idle_loop_hook(void); - - smtc_idle_loop_hook(); -#endif - if (cpu_wait) - (*cpu_wait)(); - else - local_irq_enable(); -} - asmlinkage void ret_from_fork(void); asmlinkage void ret_from_kernel_thread(void); -- cgit v1.2.3 From 00baf8576c29c93a470bdfc98a5c121a49c2f34b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 12:47:26 +0200 Subject: MIPS: Idle: cleaup SMTC idle hook as per Linux coding style. Signed-off-by: Ralf Baechle --- arch/mips/kernel/idle.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 1e9d9383d49f..28abda73126a 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -218,13 +218,18 @@ void __init check_wait(void) } } -void arch_cpu_idle(void) +static void smtc_idle_hook(void) { #ifdef CONFIG_MIPS_MT_SMTC - extern void smtc_idle_loop_hook(void); + void smtc_idle_loop_hook(void); smtc_idle_loop_hook(); #endif +} + +void arch_cpu_idle(void) +{ + smtc_idle_hook(); if (cpu_wait) (*cpu_wait)(); else -- cgit v1.2.3 From f91a148aa22b3808c12525ccc5779ff0ae6314a4 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 12:58:08 +0200 Subject: MIPS: Idle: Consistently reformat inline assembler. Signed-off-by: Ralf Baechle --- arch/mips/kernel/idle.c | 39 +++++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 18 deletions(-) diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 28abda73126a..b33875bf699d 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -57,13 +57,15 @@ void r4k_wait_irqoff(void) { local_irq_disable(); if (!need_resched()) - __asm__(" .set push \n" - " .set mips3 \n" - " wait \n" - " .set pop \n"); + __asm__( + " .set push \n" + " .set mips3 \n" + " wait \n" + " .set pop \n"); local_irq_enable(); - __asm__(" .globl __pastwait \n" - "__pastwait: \n"); + __asm__( + " .globl __pastwait \n" + "__pastwait: \n"); } /* @@ -94,18 +96,19 @@ static void rm7k_wait_irqoff(void) */ static void au1k_wait(void) { - __asm__(" .set mips3 \n" - " cache 0x14, 0(%0) \n" - " cache 0x14, 32(%0) \n" - " sync \n" - " nop \n" - " wait \n" - " nop \n" - " nop \n" - " nop \n" - " nop \n" - " .set mips0 \n" - : : "r" (au1k_wait)); + __asm__( + " .set mips3 \n" + " cache 0x14, 0(%0) \n" + " cache 0x14, 32(%0) \n" + " sync \n" + " nop \n" + " wait \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + " .set mips0 \n" + : : "r" (au1k_wait)); } static int __initdata nowait; -- cgit v1.2.3 From c9b6869dbb3c6edb24e3cc76d3655067cfa7b802 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 13:02:12 +0200 Subject: MIPS: Idle: Make call of function pointer readable. Signed-off-by: Ralf Baechle --- arch/mips/kernel/idle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index b33875bf699d..36e79f528e89 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -234,7 +234,7 @@ void arch_cpu_idle(void) { smtc_idle_hook(); if (cpu_wait) - (*cpu_wait)(); + cpu_wait(); else local_irq_enable(); } -- cgit v1.2.3 From fb40bc3e94933007d3e42e96daf1ec8044821cb8 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 14:05:27 +0200 Subject: MIPS: Idle: Re-enable irqs at the end of r3081, au1k and loongson2 cpu_wait. Without this, the WARN_ON_ONCE(irqs_disabled()); in the idle loop will be triggered. Signed-off-by: Ralf Baechle --- arch/mips/kernel/idle.c | 2 ++ drivers/cpufreq/loongson2_cpufreq.c | 1 + 2 files changed, 3 insertions(+) diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 36e79f528e89..78cc7d6fc845 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -34,6 +34,7 @@ static void r3081_wait(void) { unsigned long cfg = read_c0_conf(); write_c0_conf(cfg | R30XX_CONF_HALT); + local_irq_enable(); } static void r39xx_wait(void) @@ -109,6 +110,7 @@ static void au1k_wait(void) " nop \n" " .set mips0 \n" : : "r" (au1k_wait)); + local_irq_enable(); } static int __initdata nowait; diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c index 84889573b566..868976d443a6 100644 --- a/drivers/cpufreq/loongson2_cpufreq.c +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -200,6 +200,7 @@ static void loongson2_cpu_wait(void) LOONGSON_CHIPCFG0 &= ~0x7; /* Put CPU into wait mode */ LOONGSON_CHIPCFG0 = cpu_freq; /* Restore CPU state */ spin_unlock_irqrestore(&loongson2_wait_lock, flags); + local_irq_enable(); } static int __init cpufreq_init(void) -- cgit v1.2.3 From d882f07a83642283b9bc4e7f4c56ac4982c5e629 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 14:14:48 +0200 Subject: MIPS: Idle: Don't call local_irq_disable() in cpu_wait() implementations. The generic idle loop has already disabled interrupts so this is redundant. Signed-off-by: Ralf Baechle --- arch/mips/kernel/idle.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 78cc7d6fc845..1f85dda03df4 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -39,7 +39,6 @@ static void r3081_wait(void) static void r39xx_wait(void) { - local_irq_disable(); if (!need_resched()) write_c0_conf(read_c0_conf() | TX39_CONF_HALT); local_irq_enable(); @@ -56,7 +55,6 @@ extern void r4k_wait(void); */ void r4k_wait_irqoff(void) { - local_irq_disable(); if (!need_resched()) __asm__( " .set push \n" @@ -75,7 +73,6 @@ void r4k_wait_irqoff(void) */ static void rm7k_wait_irqoff(void) { - local_irq_disable(); if (!need_resched()) __asm__( " .set push \n" -- cgit v1.2.3 From bdc92d74e0ec95a8101447467c25f015105f2e5a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 16:59:19 +0200 Subject: MIPS: Idle: Consolidate all declarations in . Signed-off-by: Ralf Baechle --- arch/mips/alchemy/board-gpr.c | 1 + arch/mips/alchemy/common/time.c | 1 + arch/mips/ath79/setup.c | 1 + arch/mips/cobalt/reset.c | 1 + arch/mips/include/asm/idle.h | 11 +++++++++++ arch/mips/include/asm/processor.h | 1 - arch/mips/kernel/idle.c | 3 +-- arch/mips/kernel/proc.c | 1 + arch/mips/kernel/smp.c | 1 + arch/mips/kernel/smtc.c | 2 +- arch/mips/kernel/traps.c | 2 +- arch/mips/loongson/common/reset.c | 1 + arch/mips/loongson1/common/reset.c | 1 + arch/mips/netlogic/xlp/setup.c | 1 + arch/mips/netlogic/xlr/setup.c | 1 + arch/mips/pmcs-msp71xx/msp_setup.c | 1 + arch/mips/txx9/generic/setup.c | 1 + arch/mips/vr41xx/common/pmu.c | 1 + arch/mips/wrppmc/reset.c | 1 + drivers/cpufreq/loongson2_cpufreq.c | 1 + 20 files changed, 29 insertions(+), 5 deletions(-) create mode 100644 arch/mips/include/asm/idle.h diff --git a/arch/mips/alchemy/board-gpr.c b/arch/mips/alchemy/board-gpr.c index cb0f6afb7389..9edc35ff8cf1 100644 --- a/arch/mips/alchemy/board-gpr.c +++ b/arch/mips/alchemy/board-gpr.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 38afb11ba2c4..93fa586d52e2 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -36,6 +36,7 @@ #include #include +#include #include #include #include diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c index a0233a2c1988..8be4e856b8b8 100644 --- a/arch/mips/ath79/setup.c +++ b/arch/mips/ath79/setup.c @@ -19,6 +19,7 @@ #include #include +#include #include /* for mips_hpt_frequency */ #include /* for _machine_{restart,halt} */ #include diff --git a/arch/mips/cobalt/reset.c b/arch/mips/cobalt/reset.c index 516b4428df4e..4eedd481dd00 100644 --- a/arch/mips/cobalt/reset.c +++ b/arch/mips/cobalt/reset.c @@ -12,6 +12,7 @@ #include #include +#include #include #include diff --git a/arch/mips/include/asm/idle.h b/arch/mips/include/asm/idle.h new file mode 100644 index 000000000000..8b26ac5c854e --- /dev/null +++ b/arch/mips/include/asm/idle.h @@ -0,0 +1,11 @@ +#ifndef __ASM_IDLE_H +#define __ASM_IDLE_H + +#include + +extern void (*cpu_wait)(void); +extern asmlinkage void r4k_wait(void); +extern void r4k_wait_irqoff(void); +extern void __pastwait(void); + +#endif /* __ASM_IDLE_H */ diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h index 71686c897dea..1470b7b68b0e 100644 --- a/arch/mips/include/asm/processor.h +++ b/arch/mips/include/asm/processor.h @@ -28,7 +28,6 @@ /* * System setup and hardware flags.. */ -extern void (*cpu_wait)(void); extern unsigned int vced_count, vcei_count; diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 1f85dda03df4..985cc02786e3 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -18,6 +18,7 @@ #include #include #include +#include #include /* @@ -44,8 +45,6 @@ static void r39xx_wait(void) local_irq_enable(); } -extern void r4k_wait(void); - /* * This variant is preferable as it allows testing need_resched and going to * sleep depending on the outcome atomically. Unfortunately the "It is diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index a3e461408b7e..acb34373679e 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index c17619fe18e3..6e7862ab46cc 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 7186222dc5bb..46303bc61364 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include #include @@ -858,7 +859,6 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) unsigned long flags; int mtflags; unsigned long tcrestart; - extern void r4k_wait_irqoff(void), __pastwait(void); int set_resched_flag = (type == LINUX_SMP_IPI && action == SMP_RESCHEDULE_YOURSELF); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index cb14db3c5764..c6da4a905b98 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include #include @@ -57,7 +58,6 @@ #include extern void check_wait(void); -extern asmlinkage void r4k_wait(void); extern asmlinkage void rollback_handle_int(void); extern asmlinkage void handle_int(void); extern u32 handle_tlbl[]; diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c index 35c8c6468494..65bfbb5d06f4 100644 --- a/arch/mips/loongson/common/reset.c +++ b/arch/mips/loongson/common/reset.c @@ -12,6 +12,7 @@ #include #include +#include #include #include diff --git a/arch/mips/loongson1/common/reset.c b/arch/mips/loongson1/common/reset.c index d4f610f9604a..547f34b69e4c 100644 --- a/arch/mips/loongson1/common/reset.c +++ b/arch/mips/loongson1/common/reset.c @@ -9,6 +9,7 @@ #include #include +#include #include #include diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c index af319143b591..eaa99d28cb8e 100644 --- a/arch/mips/netlogic/xlp/setup.c +++ b/arch/mips/netlogic/xlp/setup.c @@ -37,6 +37,7 @@ #include #include +#include #include #include #include diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c index e3e094100e3e..89c8c1066632 100644 --- a/arch/mips/netlogic/xlr/setup.c +++ b/arch/mips/netlogic/xlr/setup.c @@ -36,6 +36,7 @@ #include #include +#include #include #include #include diff --git a/arch/mips/pmcs-msp71xx/msp_setup.c b/arch/mips/pmcs-msp71xx/msp_setup.c index 1651cfdbfe7b..396b2967ad85 100644 --- a/arch/mips/pmcs-msp71xx/msp_setup.c +++ b/arch/mips/pmcs-msp71xx/msp_setup.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 5364aabc2102..681e7f86c080 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c index 70a3f90131d8..d7f755833c3f 100644 --- a/arch/mips/vr41xx/common/pmu.c +++ b/arch/mips/vr41xx/common/pmu.c @@ -27,6 +27,7 @@ #include #include +#include #include #include #include diff --git a/arch/mips/wrppmc/reset.c b/arch/mips/wrppmc/reset.c index cc5474b24f06..80beb188ed47 100644 --- a/arch/mips/wrppmc/reset.c +++ b/arch/mips/wrppmc/reset.c @@ -9,6 +9,7 @@ #include #include +#include #include #include diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c index 868976d443a6..d53912768946 100644 --- a/drivers/cpufreq/loongson2_cpufreq.c +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -18,6 +18,7 @@ #include #include +#include #include -- cgit v1.2.3 From f94d9a8ef9aebab5317d11fb1633ba14ad240983 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 17:30:36 +0200 Subject: MIPS: Idle: Do address fiddlery in helper functions. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/idle.h | 11 +++++++++++ arch/mips/kernel/smtc.c | 3 +-- arch/mips/kernel/traps.c | 7 +++---- 3 files changed, 15 insertions(+), 6 deletions(-) diff --git a/arch/mips/include/asm/idle.h b/arch/mips/include/asm/idle.h index 8b26ac5c854e..be6f807c1e3f 100644 --- a/arch/mips/include/asm/idle.h +++ b/arch/mips/include/asm/idle.h @@ -8,4 +8,15 @@ extern asmlinkage void r4k_wait(void); extern void r4k_wait_irqoff(void); extern void __pastwait(void); +static inline int using_rollback_handler(void) +{ + return cpu_wait == r4k_wait; +} + +static inline int address_is_in_r4k_wait_irqoff(unsigned long addr) +{ + return addr >= (unsigned long)r4k_wait_irqoff && + addr < (unsigned long)__pastwait; +} + #endif /* __ASM_IDLE_H */ diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 46303bc61364..75a4fd709841 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -914,8 +914,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) */ if (cpu_wait == r4k_wait_irqoff) { tcrestart = read_tc_c0_tcrestart(); - if (tcrestart >= (unsigned long)r4k_wait_irqoff - && tcrestart < (unsigned long)__pastwait) { + if (address_is_in_r4k_wait_irqoff(tcrestart)) { write_tc_c0_tcrestart(__pastwait); tcstatus &= ~TCSTATUS_IXMT; write_tc_c0_tcstatus(tcstatus); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index c6da4a905b98..e3be67012d78 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1542,7 +1542,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) extern char except_vec_vi, except_vec_vi_lui; extern char except_vec_vi_ori, except_vec_vi_end; extern char rollback_except_vec_vi; - char *vec_start = (cpu_wait == r4k_wait) ? + char *vec_start = using_rollback_handler() ? &rollback_except_vec_vi : &except_vec_vi; #ifdef CONFIG_MIPS_MT_SMTC /* @@ -1812,10 +1812,8 @@ void __init trap_init(void) extern char except_vec4; extern char except_vec3_r4000; unsigned long i; - int rollback; check_wait(); - rollback = (cpu_wait == r4k_wait); #if defined(CONFIG_KGDB) if (kgdb_early_setup) @@ -1892,7 +1890,8 @@ void __init trap_init(void) if (board_be_init) board_be_init(); - set_except_vector(0, rollback ? rollback_handle_int : handle_int); + set_except_vector(0, using_rollback_handler() ? rollback_handle_int + : handle_int); set_except_vector(1, handle_tlbm); set_except_vector(2, handle_tlbl); set_except_vector(3, handle_tlbs); -- cgit v1.2.3 From 087d990b371c59edbfc119600e2d2eda18366292 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 17:33:32 +0200 Subject: MIPS: Idle: Break r4k_wait into two functions and fix it. local_irq_enable() may expand into very different code, so it rather should stay in C. Also this keeps the assembler code size constant which keeps the rollback code simple. So it's best to split r4k_wait into two parts, one C and one assembler. Finally add the local_irq_enable() to r4k_wait to ensure the WAIT instruction in __r4k_wait() will work properly. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/idle.h | 3 ++- arch/mips/kernel/genex.S | 6 +++--- arch/mips/kernel/idle.c | 6 ++++++ 3 files changed, 11 insertions(+), 4 deletions(-) diff --git a/arch/mips/include/asm/idle.h b/arch/mips/include/asm/idle.h index be6f807c1e3f..d192158886b1 100644 --- a/arch/mips/include/asm/idle.h +++ b/arch/mips/include/asm/idle.h @@ -4,7 +4,8 @@ #include extern void (*cpu_wait)(void); -extern asmlinkage void r4k_wait(void); +extern void r4k_wait(void); +extern asmlinkage void __r4k_wait(void); extern void r4k_wait_irqoff(void); extern void __pastwait(void); diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index 9098829bfcb0..31fa856829cb 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -122,7 +122,7 @@ handle_vcei: __FINIT .align 5 /* 32 byte rollback region */ -LEAF(r4k_wait) +LEAF(__r4k_wait) .set push .set noreorder /* start of rollback region */ @@ -146,14 +146,14 @@ LEAF(r4k_wait) jr ra nop .set pop - END(r4k_wait) + END(__r4k_wait) .macro BUILD_ROLLBACK_PROLOGUE handler FEXPORT(rollback_\handler) .set push .set noat MFC0 k0, CP0_EPC - PTR_LA k1, r4k_wait + PTR_LA k1, __r4k_wait ori k0, 0x1f /* 32 byte rollback region */ xori k0, 0x1f bne k0, k1, 9f diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 985cc02786e3..3b09b888afa9 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -45,6 +45,12 @@ static void r39xx_wait(void) local_irq_enable(); } +void r4k_wait(void) +{ + local_irq_enable(); + __r4k_wait(); +} + /* * This variant is preferable as it allows testing need_resched and going to * sleep depending on the outcome atomically. Unfortunately the "It is -- cgit v1.2.3 From 5f10428e4a6d99cc019270c51ad5a33fb38addeb Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 16 May 2013 12:14:59 +0900 Subject: ARM: shmobile: marzen: Use error values in usb_power_* This patch updates the marzen board code as if USB PHY isn't enabled they phy will have a value set by ERR_PTR() rather than be NULL. Without this patch a NULL pointer dereference and kernel panic occurs on initialisation of USB on marzen. This resolves a regression introduced in 3.10-rc1 by b7fa5c2aec5be083eb2719b405089703608e9bc6 ("usb: phy: return -ENXIO when PHY layer isn't enabled"). Tested-by: Nguyen Hong Ky Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-marzen.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 91052855cc12..b9594e911ce7 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -212,8 +212,8 @@ static struct platform_device *marzen_devices[] __initdata = { static struct usb_phy *phy; static int usb_power_on(struct platform_device *pdev) { - if (!phy) - return -EIO; + if (IS_ERR(phy)) + return PTR_ERR(phy); pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); @@ -225,7 +225,7 @@ static int usb_power_on(struct platform_device *pdev) static void usb_power_off(struct platform_device *pdev) { - if (!phy) + if (IS_ERR(phy)) return; usb_phy_shutdown(phy); -- cgit v1.2.3 From ba86e4dda700b3e696119c7f4fad945b90cf5c84 Mon Sep 17 00:00:00 2001 From: Sanjay Lal Date: Sat, 18 May 2013 06:54:23 -0700 Subject: KVM/MIPS32: Move include/asm/kvm.h => include/uapi/asm/kvm.h since it is a user visible API. Signed-off-by: Sanjay Lal Signed-off-by: Gleb Natapov --- arch/mips/include/asm/kvm.h | 55 ---------------------------------------- arch/mips/include/uapi/asm/kvm.h | 55 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 55 insertions(+), 55 deletions(-) delete mode 100644 arch/mips/include/asm/kvm.h create mode 100644 arch/mips/include/uapi/asm/kvm.h diff --git a/arch/mips/include/asm/kvm.h b/arch/mips/include/asm/kvm.h deleted file mode 100644 index 85789eacbf18..000000000000 --- a/arch/mips/include/asm/kvm.h +++ /dev/null @@ -1,55 +0,0 @@ -/* -* This file is subject to the terms and conditions of the GNU General Public -* License. See the file "COPYING" in the main directory of this archive -* for more details. -* -* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. -* Authors: Sanjay Lal -*/ - -#ifndef __LINUX_KVM_MIPS_H -#define __LINUX_KVM_MIPS_H - -#include - -#define __KVM_MIPS - -#define N_MIPS_COPROC_REGS 32 -#define N_MIPS_COPROC_SEL 8 - -/* for KVM_GET_REGS and KVM_SET_REGS */ -struct kvm_regs { - __u32 gprs[32]; - __u32 hi; - __u32 lo; - __u32 pc; - - __u32 cp0reg[N_MIPS_COPROC_REGS][N_MIPS_COPROC_SEL]; -}; - -/* for KVM_GET_SREGS and KVM_SET_SREGS */ -struct kvm_sregs { -}; - -/* for KVM_GET_FPU and KVM_SET_FPU */ -struct kvm_fpu { -}; - -struct kvm_debug_exit_arch { -}; - -/* for KVM_SET_GUEST_DEBUG */ -struct kvm_guest_debug_arch { -}; - -struct kvm_mips_interrupt { - /* in */ - __u32 cpu; - __u32 irq; -}; - -/* definition of registers in kvm_run */ -struct kvm_sync_regs { -}; - -#endif /* __LINUX_KVM_MIPS_H */ diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h new file mode 100644 index 000000000000..85789eacbf18 --- /dev/null +++ b/arch/mips/include/uapi/asm/kvm.h @@ -0,0 +1,55 @@ +/* +* This file is subject to the terms and conditions of the GNU General Public +* License. See the file "COPYING" in the main directory of this archive +* for more details. +* +* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. +* Authors: Sanjay Lal +*/ + +#ifndef __LINUX_KVM_MIPS_H +#define __LINUX_KVM_MIPS_H + +#include + +#define __KVM_MIPS + +#define N_MIPS_COPROC_REGS 32 +#define N_MIPS_COPROC_SEL 8 + +/* for KVM_GET_REGS and KVM_SET_REGS */ +struct kvm_regs { + __u32 gprs[32]; + __u32 hi; + __u32 lo; + __u32 pc; + + __u32 cp0reg[N_MIPS_COPROC_REGS][N_MIPS_COPROC_SEL]; +}; + +/* for KVM_GET_SREGS and KVM_SET_SREGS */ +struct kvm_sregs { +}; + +/* for KVM_GET_FPU and KVM_SET_FPU */ +struct kvm_fpu { +}; + +struct kvm_debug_exit_arch { +}; + +/* for KVM_SET_GUEST_DEBUG */ +struct kvm_guest_debug_arch { +}; + +struct kvm_mips_interrupt { + /* in */ + __u32 cpu; + __u32 irq; +}; + +/* definition of registers in kvm_run */ +struct kvm_sync_regs { +}; + +#endif /* __LINUX_KVM_MIPS_H */ -- cgit v1.2.3 From 6d17c0d1e8a66f5508082cb0fecb8afb7e9a21e4 Mon Sep 17 00:00:00 2001 From: Sanjay Lal Date: Sat, 18 May 2013 06:54:24 -0700 Subject: KVM/MIPS32: Wrap calls to gfn_to_pfn() with srcu_read_lock/unlock() - As suggested by Gleb, wrap calls to gfn_to_pfn() with srcu_read_lock/unlock(). Memory slots should be acccessed from a SRCU read section. - kvm_mips_map_page() now returns an error code to it's callers, instead of calling panic() if it cannot find a mapping for a particular gfn. Signed-off-by: Sanjay Lal Signed-off-by: Gleb Natapov --- arch/mips/kvm/kvm_tlb.c | 35 ++++++++++++++++++++++++++--------- 1 file changed, 26 insertions(+), 9 deletions(-) diff --git a/arch/mips/kvm/kvm_tlb.c b/arch/mips/kvm/kvm_tlb.c index 89511a9258d3..87d845e9e5ab 100644 --- a/arch/mips/kvm/kvm_tlb.c +++ b/arch/mips/kvm/kvm_tlb.c @@ -17,6 +17,8 @@ #include #include #include +#include + #include #include @@ -169,21 +171,27 @@ void kvm_mips_dump_shadow_tlbs(struct kvm_vcpu *vcpu) } } -static void kvm_mips_map_page(struct kvm *kvm, gfn_t gfn) +static int kvm_mips_map_page(struct kvm *kvm, gfn_t gfn) { + int srcu_idx, err = 0; pfn_t pfn; if (kvm->arch.guest_pmap[gfn] != KVM_INVALID_PAGE) - return; + return 0; + srcu_idx = srcu_read_lock(&kvm->srcu); pfn = kvm_mips_gfn_to_pfn(kvm, gfn); if (kvm_mips_is_error_pfn(pfn)) { - panic("Couldn't get pfn for gfn %#" PRIx64 "!\n", gfn); + kvm_err("Couldn't get pfn for gfn %#" PRIx64 "!\n", gfn); + err = -EFAULT; + goto out; } kvm->arch.guest_pmap[gfn] = pfn; - return; +out: + srcu_read_unlock(&kvm->srcu, srcu_idx); + return err; } /* Translate guest KSEG0 addresses to Host PA */ @@ -207,7 +215,10 @@ unsigned long kvm_mips_translate_guest_kseg0_to_hpa(struct kvm_vcpu *vcpu, gva); return KVM_INVALID_PAGE; } - kvm_mips_map_page(vcpu->kvm, gfn); + + if (kvm_mips_map_page(vcpu->kvm, gfn) < 0) + return KVM_INVALID_ADDR; + return (kvm->arch.guest_pmap[gfn] << PAGE_SHIFT) + offset; } @@ -310,8 +321,11 @@ int kvm_mips_handle_kseg0_tlb_fault(unsigned long badvaddr, even = !(gfn & 0x1); vaddr = badvaddr & (PAGE_MASK << 1); - kvm_mips_map_page(vcpu->kvm, gfn); - kvm_mips_map_page(vcpu->kvm, gfn ^ 0x1); + if (kvm_mips_map_page(vcpu->kvm, gfn) < 0) + return -1; + + if (kvm_mips_map_page(vcpu->kvm, gfn ^ 0x1) < 0) + return -1; if (even) { pfn0 = kvm->arch.guest_pmap[gfn]; @@ -389,8 +403,11 @@ kvm_mips_handle_mapped_seg_tlb_fault(struct kvm_vcpu *vcpu, pfn0 = 0; pfn1 = 0; } else { - kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT); - kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT); + if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT) < 0) + return -1; + + if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT) < 0) + return -1; pfn0 = kvm->arch.guest_pmap[mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT]; pfn1 = kvm->arch.guest_pmap[mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT]; -- cgit v1.2.3 From b5f14720a6421aab841d9f03f0129cfbe7db5133 Mon Sep 17 00:00:00 2001 From: Rafał Bilski Date: Sun, 19 May 2013 19:27:55 +0000 Subject: cpufreq / e_powersaver: Fix linker error when ACPI processor is a module on i386: CONFIG_ACPI_PROCESSOR=m CONFIG_X86_E_POWERSAVER=y drivers/built-in.o: In function `eps_cpu_init.part.8': e_powersaver.c:(.text.unlikely+0x2243): undefined reference to `acpi_processor_register_performance' e_powersaver.c:(.text.unlikely+0x22a2): undefined reference to `acpi_processor_unregister_performance' e_powersaver.c:(.text.unlikely+0x246b): undefined reference to `acpi_processor_get_bios_limit' X86_E_POWERSAVER should also depend on ACPI_PROCESSOR. Signed-off-by: Rafal Bilski Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/Kconfig.x86 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 index 2b8a8c374548..6bd63d63d356 100644 --- a/drivers/cpufreq/Kconfig.x86 +++ b/drivers/cpufreq/Kconfig.x86 @@ -272,7 +272,7 @@ config X86_LONGHAUL config X86_E_POWERSAVER tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)" select CPU_FREQ_TABLE - depends on X86_32 + depends on X86_32 && ACPI_PROCESSOR help This adds the CPUFreq driver for VIA C7 processors. However, this driver does not have any safeguards to prevent operating the CPU out of spec -- cgit v1.2.3 From 92a9b5c291c72aa9899021699458f0b6e328b940 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 17 May 2013 11:25:11 +0000 Subject: cpufreq: arm_big_little_dt: Register driver only if DT has valid data If arm_big_little_dt driver is enabled, then it will always try to register with big LITTLE cpufreq core driver. In case DT doesn't have relevant data for cpu nodes, i.e. operating points aren't present, then we should exit early and shouldn't register with big LITTLE cpufreq core driver. Otherwise we will fail continuously from the driver->init() routine. This patch fixes this issue. Reported-and-tested-by: Jon Medhurst Reviewed-by: Jon Medhurst Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/arm_big_little_dt.c | 73 +++++++++++++++++++++---------------- 1 file changed, 42 insertions(+), 31 deletions(-) diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c index 173ed059d95f..27e2f45ccdd5 100644 --- a/drivers/cpufreq/arm_big_little_dt.c +++ b/drivers/cpufreq/arm_big_little_dt.c @@ -19,6 +19,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include #include #include #include @@ -29,60 +30,63 @@ #include #include "arm_big_little.h" -static int dt_init_opp_table(struct device *cpu_dev) +/* get cpu node with valid operating-points */ +static struct device_node *get_cpu_node_with_valid_op(int cpu) { - struct device_node *np, *parent; - int count = 0, ret; + struct device_node *np = NULL, *parent; + int count = 0; parent = of_find_node_by_path("/cpus"); if (!parent) { pr_err("failed to find OF /cpus\n"); - return -ENOENT; + return NULL; } for_each_child_of_node(parent, np) { - if (count++ != cpu_dev->id) + if (count++ != cpu) continue; if (!of_get_property(np, "operating-points", NULL)) { - ret = -ENODATA; - } else { - cpu_dev->of_node = np; - ret = of_init_opp_table(cpu_dev); + of_node_put(np); + np = NULL; } - of_node_put(np); - of_node_put(parent); - return ret; + break; } - return -ENODEV; + of_node_put(parent); + return np; +} + +static int dt_init_opp_table(struct device *cpu_dev) +{ + struct device_node *np; + int ret; + + np = get_cpu_node_with_valid_op(cpu_dev->id); + if (!np) + return -ENODATA; + + cpu_dev->of_node = np; + ret = of_init_opp_table(cpu_dev); + of_node_put(np); + + return ret; } static int dt_get_transition_latency(struct device *cpu_dev) { - struct device_node *np, *parent; + struct device_node *np; u32 transition_latency = CPUFREQ_ETERNAL; - int count = 0; - parent = of_find_node_by_path("/cpus"); - if (!parent) { - pr_info("Failed to find OF /cpus. Use CPUFREQ_ETERNAL transition latency\n"); + np = get_cpu_node_with_valid_op(cpu_dev->id); + if (!np) return CPUFREQ_ETERNAL; - } - - for_each_child_of_node(parent, np) { - if (count++ != cpu_dev->id) - continue; - - of_property_read_u32(np, "clock-latency", &transition_latency); - of_node_put(np); - of_node_put(parent); - return transition_latency; - } + of_property_read_u32(np, "clock-latency", &transition_latency); + of_node_put(np); - pr_info("clock-latency isn't found, use CPUFREQ_ETERNAL transition latency\n"); - return CPUFREQ_ETERNAL; + pr_debug("%s: clock-latency: %d\n", __func__, transition_latency); + return transition_latency; } static struct cpufreq_arm_bL_ops dt_bL_ops = { @@ -93,6 +97,13 @@ static struct cpufreq_arm_bL_ops dt_bL_ops = { static int generic_bL_init(void) { + struct device_node *np; + + np = get_cpu_node_with_valid_op(0); + if (!np) + return -ENODEV; + + of_node_put(np); return bL_cpufreq_register(&dt_bL_ops); } module_init(generic_bL_init); -- cgit v1.2.3 From 9076eaca60b3796b3b97d1914c4924c4bc39f066 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 20 May 2013 09:57:17 +0530 Subject: cpufreq: arm_big_little_dt: Instantiate as platform_driver As multiplatform build is being adopted by more and more ARM platforms, initcall function should be used very carefully. For example, when both arm_big_little_dt and cpufreq-cpu0 drivers are compiled in, arm_big_little_dt driver may try to register even if we had platform device for cpufreq-cpu0 registered. To eliminate this undesired the effect, the patch changes arm_big_little_dt driver to have it instantiated as a platform_driver. Then it will only run on platforms that create the platform_device "arm-bL-cpufreq-dt". Reported-and-tested-by: Rob Herring Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/arm_big_little_dt.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c index 27e2f45ccdd5..fd9e3ea6a480 100644 --- a/drivers/cpufreq/arm_big_little_dt.c +++ b/drivers/cpufreq/arm_big_little_dt.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include "arm_big_little.h" @@ -95,7 +96,7 @@ static struct cpufreq_arm_bL_ops dt_bL_ops = { .init_opp_table = dt_init_opp_table, }; -static int generic_bL_init(void) +static int generic_bL_probe(struct platform_device *pdev) { struct device_node *np; @@ -106,13 +107,22 @@ static int generic_bL_init(void) of_node_put(np); return bL_cpufreq_register(&dt_bL_ops); } -module_init(generic_bL_init); -static void generic_bL_exit(void) +static int generic_bL_remove(struct platform_device *pdev) { - return bL_cpufreq_unregister(&dt_bL_ops); + bL_cpufreq_unregister(&dt_bL_ops); + return 0; } -module_exit(generic_bL_exit); + +static struct platform_driver generic_bL_platdrv = { + .driver = { + .name = "arm-bL-cpufreq-dt", + .owner = THIS_MODULE, + }, + .probe = generic_bL_probe, + .remove = generic_bL_remove, +}; +module_platform_driver(generic_bL_platdrv); MODULE_AUTHOR("Viresh Kumar "); MODULE_DESCRIPTION("Generic ARM big LITTLE cpufreq driver via DT"); -- cgit v1.2.3 From 22047b85170280b0ca59ce4befd0fa1f71a4ec16 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Wed, 22 May 2013 08:34:13 +0000 Subject: kprobes/mips: Fix to check double free of insn slot Fix to check double free of insn_slot at arch_remove_kprobe as other arches do. Signed-off-by: Masami Hiramatsu Cc: David Daney Cc: Maneesh Soni Cc: Victor Kamensky Cc: linux-mips@linux-mips.org Cc: Ingo Molnar Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: yrl.pp-manager.tt@hitachi.com Cc: systemtap@sourceware.org Patchwork: https://patchwork.linux-mips.org/patch/5293/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/kprobes.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c index 12bc4ebdf55b..1f8187ab0997 100644 --- a/arch/mips/kernel/kprobes.c +++ b/arch/mips/kernel/kprobes.c @@ -207,7 +207,10 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p) void __kprobes arch_remove_kprobe(struct kprobe *p) { - free_insn_slot(p->ainsn.insn, 0); + if (p->ainsn.insn) { + free_insn_slot(p->ainsn.insn, 0); + p->ainsn.insn = NULL; + } } static void save_previous_kprobe(struct kprobe_ctlblk *kcb) -- cgit v1.2.3 From dec33abaafc89bcbd78f85fad0513170415a26d5 Mon Sep 17 00:00:00 2001 From: Aron Xu Date: Tue, 21 May 2013 13:37:06 +0000 Subject: MIPS: N64: Wire getdents64(2) As a relatively new ABI, N64 only had getdents syscall while other modern architectures have getdents64. This was noticed when Python 3.3 shifted to the latter one for aarch64. [ralf@linux-mips.org: The history of getdents64 is a little complicated. Commit 1a1d77dd589de5a567fa95e36aa6999c704ceca4 [Merge with 2.4.0-test7.] added N64 getdents(2) to arch/mips64/kernel/scall_64.S as syscall 5213, then dropped again in 578720675c44e54e8aa7c68f6dce59ed37ce3d3b [Overhaul of the 64-bit syscall interface. Now heritage free.] for 2.5.18 in 2002.] Signed-off-by: Aron Xu Acked-by: David Daney Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5285/ Signed-off-by: Ralf Baechle --- arch/mips/include/uapi/asm/unistd.h | 5 +++-- arch/mips/kernel/scall64-64.S | 1 + 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h index 16338b84fa79..1dee279f9665 100644 --- a/arch/mips/include/uapi/asm/unistd.h +++ b/arch/mips/include/uapi/asm/unistd.h @@ -694,16 +694,17 @@ #define __NR_process_vm_writev (__NR_Linux + 305) #define __NR_kcmp (__NR_Linux + 306) #define __NR_finit_module (__NR_Linux + 307) +#define __NR_getdents64 (__NR_Linux + 308) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 307 +#define __NR_Linux_syscalls 308 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 307 +#define __NR_64_Linux_syscalls 308 #if _MIPS_SIM == _MIPS_SIM_NABI32 diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 36cfd4060e1f..97a5909a61cf 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -423,4 +423,5 @@ sys_call_table: PTR sys_process_vm_writev /* 5305 */ PTR sys_kcmp PTR sys_finit_module + PTR sys_getdents64 .size sys_call_table,.-sys_call_table -- cgit v1.2.3 From bb3ec6b08396bbd631b6441102dd1c3d89cbc576 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 22 May 2013 12:18:47 +0200 Subject: mm: Fix virt_to_page() warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit virt_to_page() is typically implemented as a macro containing a cast so that it will accept both pointers and unsigned long without causing a warning. But MIPS virt_to_page() uses virt_to_phys which is a function so passing an unsigned long will cause a warning: CC mm/page_alloc.o mm/page_alloc.c: In function ‘free_reserved_area’: mm/page_alloc.c:5161:3: warning: passing argument 1 of ‘virt_to_phys’ makes pointer from integer without a cast [enabled by default] arch/mips/include/asm/io.h:119:100: note: expected ‘const volatile void *’ but argument is of type ‘long unsigned int’ All others users of virt_to_page() in mm/ are passing a void *. Signed-off-by: Ralf Baechle Reported-by: Eunbong Song Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-mips@linux-mips.org Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 98cbdf6e5532..378a15bcd649 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -5158,7 +5158,7 @@ unsigned long free_reserved_area(unsigned long start, unsigned long end, for (pages = 0; pos < end; pos += PAGE_SIZE, pages++) { if (poison) memset((void *)pos, poison, PAGE_SIZE); - free_reserved_page(virt_to_page(pos)); + free_reserved_page(virt_to_page((void *)pos)); } if (pages && s) -- cgit v1.2.3 From e037f95ffb5355ffe295e1d106d02fefd284d882 Mon Sep 17 00:00:00 2001 From: "Matwey V. Kornilov" Date: Wed, 22 May 2013 11:13:38 +0400 Subject: tty: mxser: Fix build warning introduced by dfc7b837c7f9 (Re: linux-next: build warning after merge of the tty.current tree) Fix build warning at mxser.c introduced by dfc7b837c7f9 (tty: mxser: fix usage of opmode_ioaddr) Signed-off-by: Matwey V. Kornilov Reported-by: kbuild test robot Reported-by: Stephen Rothwell Signed-off-by: Greg Kroah-Hartman --- drivers/tty/mxser.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index f97b196693c6..4c4a23674569 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -1674,15 +1674,15 @@ static int mxser_ioctl(struct tty_struct *tty, return mxser_ioctl_special(cmd, argp); if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) { - if (info->board->chip_flag != MOXA_MUST_MU860_HWID) - return -EFAULT; - int p; unsigned long opmode; static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f }; int shiftbit; unsigned char val, mask; + if (info->board->chip_flag != MOXA_MUST_MU860_HWID) + return -EFAULT; + p = tty->index % 4; if (cmd == MOXA_SET_OP_MODE) { if (get_user(opmode, (int __user *) argp)) -- cgit v1.2.3 From a3c3cac5d31879cd9ae2de7874dc6544ca704aec Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 22 May 2013 12:57:24 -0400 Subject: SUNRPC: Prevent an rpc_task wakeup race The lockless RPC_IS_QUEUED() test in __rpc_execute means that we need to be careful about ordering the calls to rpc_test_and_set_running(task) and rpc_clear_queued(task). If we get the order wrong, then we may end up testing the RPC_TASK_RUNNING flag after __rpc_execute() has looped and changed the state of the rpc_task. Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- net/sunrpc/sched.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index f8529fc8e542..5356b120dbf8 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -324,11 +324,17 @@ EXPORT_SYMBOL_GPL(__rpc_wait_for_completion_task); * Note: If the task is ASYNC, and is being made runnable after sitting on an * rpc_wait_queue, this must be called with the queue spinlock held to protect * the wait queue operation. + * Note the ordering of rpc_test_and_set_running() and rpc_clear_queued(), + * which is needed to ensure that __rpc_execute() doesn't loop (due to the + * lockless RPC_IS_QUEUED() test) before we've had a chance to test + * the RPC_TASK_RUNNING flag. */ static void rpc_make_runnable(struct rpc_task *task) { + bool need_wakeup = !rpc_test_and_set_running(task); + rpc_clear_queued(task); - if (rpc_test_and_set_running(task)) + if (!need_wakeup) return; if (RPC_IS_ASYNC(task)) { INIT_WORK(&task->u.tk_work, rpc_async_schedule); -- cgit v1.2.3 From 0c9b5a317b8ae7201fed07ec66d642b2ad7ea1b0 Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Fri, 17 May 2013 23:45:18 +0800 Subject: avr32: fix building warnings caused by redefinitions of HZ As suggested by David Howells , use asm-generic/param.h and uapi/asm-generic/param.h for AVR32. It also fixes building warnings caused by redefinitions of HZ: In file included from /ws/linux/kernel/linux.git/include/uapi/linux/param.h:4, from include/linux/timex.h:63, from include/linux/jiffies.h:8, from include/linux/ktime.h:25, from include/linux/timer.h:5, from include/linux/workqueue.h:8, from include/linux/srcu.h:34, from include/linux/notifier.h:15, from include/linux/memory_hotplug.h:6, from include/linux/mmzone.h:777, from include/linux/gfp.h:4, from arch/avr32/mm/init.c:10: /ws/linux/kernel/linux.git/arch/avr32/include/asm/param.h:6:1: warning: "HZ" redefined In file included from /ws/linux/kernel/linux.git/arch/avr32/include/asm/param.h:4, from /ws/linux/kernel/linux.git/include/uapi/linux/param.h:4, from include/linux/timex.h:63, from include/linux/jiffies.h:8, from include/linux/ktime.h:25, from include/linux/timer.h:5, from include/linux/workqueue.h:8, from include/linux/srcu.h:34, from include/linux/notifier.h:15, from include/linux/memory_hotplug.h:6, from include/linux/mmzone.h:777, from include/linux/gfp.h:4, from arch/avr32/mm/init.c:10: /ws/linux/kernel/linux.git/arch/avr32/include/uapi/asm/param.h:6:1: warning: this is the location of the previous definition Signed-off-by: Jiang Liu Cc: Hans-Christian Egtvedt Cc: Haavard Skinnemoen Cc: linux-kernel@vger.kernel.org Signed-off-by: Hans-Christian Egtvedt --- arch/avr32/include/asm/Kbuild | 1 + arch/avr32/include/asm/param.h | 9 --------- arch/avr32/include/uapi/asm/Kbuild | 1 + arch/avr32/include/uapi/asm/param.h | 18 ------------------ 4 files changed, 2 insertions(+), 27 deletions(-) delete mode 100644 arch/avr32/include/asm/param.h delete mode 100644 arch/avr32/include/uapi/asm/param.h diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild index 4dd4f78d3dcc..d22af851f3f6 100644 --- a/arch/avr32/include/asm/Kbuild +++ b/arch/avr32/include/asm/Kbuild @@ -2,3 +2,4 @@ generic-y += clkdev.h generic-y += exec.h generic-y += trace_clock.h +generic-y += param.h diff --git a/arch/avr32/include/asm/param.h b/arch/avr32/include/asm/param.h deleted file mode 100644 index 009a167aea1f..000000000000 --- a/arch/avr32/include/asm/param.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_AVR32_PARAM_H -#define __ASM_AVR32_PARAM_H - -#include - -# define HZ CONFIG_HZ -# define USER_HZ 100 /* User interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ -#endif /* __ASM_AVR32_PARAM_H */ diff --git a/arch/avr32/include/uapi/asm/Kbuild b/arch/avr32/include/uapi/asm/Kbuild index df53e7a46774..3b85eaddf525 100644 --- a/arch/avr32/include/uapi/asm/Kbuild +++ b/arch/avr32/include/uapi/asm/Kbuild @@ -33,3 +33,4 @@ header-y += termbits.h header-y += termios.h header-y += types.h header-y += unistd.h +generic-y += param.h diff --git a/arch/avr32/include/uapi/asm/param.h b/arch/avr32/include/uapi/asm/param.h deleted file mode 100644 index d28aa5ee6d37..000000000000 --- a/arch/avr32/include/uapi/asm/param.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _UAPI__ASM_AVR32_PARAM_H -#define _UAPI__ASM_AVR32_PARAM_H - - -#ifndef HZ -# define HZ 100 -#endif - -/* TODO: Should be configurable */ -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -# define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 - -#endif /* _UAPI__ASM_AVR32_PARAM_H */ -- cgit v1.2.3 From 934fc24df10abfd5aff533d0d044a17669d77d79 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 15 May 2013 10:46:30 +0100 Subject: ARM: 7723/1: crypto: sha1-armv4-large.S: fix SP handling Make the SHA1 asm code ABI conformant by making sure all stack accesses occur above the stack pointer. Origin: http://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=1a9d60d2 Signed-off-by: Ard Biesheuvel Acked-by: Nicolas Pitre Cc: stable@vger.kernel.org Signed-off-by: Russell King --- arch/arm/crypto/sha1-armv4-large.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S index 92c6eed7aac9..99207c45ec10 100644 --- a/arch/arm/crypto/sha1-armv4-large.S +++ b/arch/arm/crypto/sha1-armv4-large.S @@ -195,6 +195,7 @@ ENTRY(sha1_block_data_order) add r3,r3,r10 @ E+=F_00_19(B,C,D) cmp r14,sp bne .L_00_15 @ [((11+4)*5+2)*3] + sub sp,sp,#25*4 #if __ARM_ARCH__<7 ldrb r10,[r1,#2] ldrb r9,[r1,#3] @@ -290,7 +291,6 @@ ENTRY(sha1_block_data_order) add r3,r3,r10 @ E+=F_00_19(B,C,D) ldr r8,.LK_20_39 @ [+15+16*4] - sub sp,sp,#25*4 cmn sp,#0 @ [+3], clear carry to denote 20_39 .L_20_39_or_60_79: ldr r9,[r14,#15*4] -- cgit v1.2.3 From 4ca46c5e1f38e32c90247686e9e17dae213ecbdb Mon Sep 17 00:00:00 2001 From: Steven Capper Date: Thu, 16 May 2013 17:16:11 +0100 Subject: ARM: 7727/1: remove the .vm_mm value from gate_vma If one reads /proc/$PID/smaps, the mmap_sem belonging to the address space of the task being examined is locked for reading. All the pages of the vmas belonging to the task's address space are then walked with this lock held. If a gate_vma is present in the architecture, it too is examined by the fs/proc/task_mmu.c code. As gate_vma doesn't belong to the address space of the task though, its pages are not walked. A recent cleanup (commit f6604efe) of the gate_vma initialisation code set the vm_mm value to &init_mm. Unfortunately a non-NULL vm_mm value in the gate_vma will cause the task_mmu code to attempt to walk the pages of the gate_vma (with no mmap-sem lock held). If one enables Transparent Huge Page support and vm debugging, this will then cause OOPses as pmd_trans_huge_lock is called without mmap_sem being locked. This patch removes the .vm_mm value from gate_vma, restoring the original behaviour of the task_mmu code. Signed-off-by: Steve Capper Signed-off-by: Russell King --- arch/arm/kernel/process.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index f21970316836..282de4826abb 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -411,7 +411,6 @@ static struct vm_area_struct gate_vma = { .vm_start = 0xffff0000, .vm_end = 0xffff0000 + PAGE_SIZE, .vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC, - .vm_mm = &init_mm, }; static int __init gate_vma_init(void) -- cgit v1.2.3 From f27d6e172367a424ecf9d373062a820338671277 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 16 May 2013 19:38:51 +0100 Subject: ARM: 7729/1: vfp: ensure VFP_arch is non-zero when VFP is not supported Commit d3f79584a8b5 ("ARM: cleanup undefined instruction entry code") improved the register scheduling when handling undefined instructions. A side effect of this is that r5 is now used as a temporary, whilst the VFP probing code relies on r5 containing a non-zero value when VFP is not supported. This patch fixes the VFP detection code so that we don't rely on the contents of r5. Without this patch, Linux dies loudly on CPUs without VFP support. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/vfp/entry.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 323ce1a62bbf..46e17492fd1f 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -60,7 +60,7 @@ ENTRY(vfp_testing_entry) str r11, [r10, #TI_PREEMPT] #endif ldr r0, VFP_arch_address - str r5, [r0] @ known non-zero value + str r0, [r0] @ set to non-zero value mov pc, r9 @ we have handled the fault ENDPROC(vfp_testing_entry) -- cgit v1.2.3 From c80712c793febdf1b13ad0e1c71a051e071b3fd8 Mon Sep 17 00:00:00 2001 From: Michał Mirosław Date: Sat, 4 May 2013 14:19:00 +0100 Subject: staging/iio/mxs-lradc: fix preenable for multiple buffers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes 'preenable failed: -EINVAL' error when using this driver. Signed-off-by: Michał Mirosław Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/mxs-lradc.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c index 2856b8fd44ad..163c638e4095 100644 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -690,7 +690,6 @@ static void mxs_lradc_trigger_remove(struct iio_dev *iio) static int mxs_lradc_buffer_preenable(struct iio_dev *iio) { struct mxs_lradc *lradc = iio_priv(iio); - struct iio_buffer *buffer = iio->buffer; int ret = 0, chan, ofs = 0; unsigned long enable = 0; uint32_t ctrl4_set = 0; @@ -698,7 +697,7 @@ static int mxs_lradc_buffer_preenable(struct iio_dev *iio) uint32_t ctrl1_irq = 0; const uint32_t chan_value = LRADC_CH_ACCUMULATE | ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); - const int len = bitmap_weight(buffer->scan_mask, LRADC_MAX_TOTAL_CHANS); + const int len = bitmap_weight(iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS); if (!len) return -EINVAL; @@ -725,7 +724,7 @@ static int mxs_lradc_buffer_preenable(struct iio_dev *iio) lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR); writel(0xff, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR); - for_each_set_bit(chan, buffer->scan_mask, LRADC_MAX_TOTAL_CHANS) { + for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs); ctrl4_clr |= LRADC_CTRL4_LRADCSELECT_MASK(ofs); ctrl1_irq |= LRADC_CTRL1_LRADC_IRQ_EN(ofs); -- cgit v1.2.3 From 3b813798aa7030f1beef638c75f8b0008f737a82 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 May 2013 12:51:00 +0100 Subject: staging:iio:light:tsl2x7x: fix the error handling in tsl2x7x_probe() Fix to return -EINVAL in the i2c device found error handling case instead of 0, as done elsewhere in this function. And also correct the fail1 and fail2 lable to do the right thing. Signed-off-by: Wei Yongjun Signed-off-by: Jonathan Cameron --- drivers/staging/iio/light/tsl2x7x_core.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/staging/iio/light/tsl2x7x_core.c b/drivers/staging/iio/light/tsl2x7x_core.c index d060f2572512..c99f890cc6c6 100644 --- a/drivers/staging/iio/light/tsl2x7x_core.c +++ b/drivers/staging/iio/light/tsl2x7x_core.c @@ -1869,6 +1869,7 @@ static int tsl2x7x_probe(struct i2c_client *clientp, dev_info(&chip->client->dev, "%s: i2c device found does not match expected id\n", __func__); + ret = -EINVAL; goto fail1; } @@ -1907,7 +1908,7 @@ static int tsl2x7x_probe(struct i2c_client *clientp, if (ret) { dev_err(&clientp->dev, "%s: irq request failed", __func__); - goto fail2; + goto fail1; } } @@ -1920,17 +1921,17 @@ static int tsl2x7x_probe(struct i2c_client *clientp, if (ret) { dev_err(&clientp->dev, "%s: iio registration failed\n", __func__); - goto fail1; + goto fail2; } dev_info(&clientp->dev, "%s Light sensor found.\n", id->name); return 0; -fail1: +fail2: if (clientp->irq) free_irq(clientp->irq, indio_dev); -fail2: +fail1: iio_device_free(indio_dev); return ret; -- cgit v1.2.3 From 0ae5fb6fd346cf368639fb6256db6af0831b0048 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 9 May 2013 08:49:00 +0100 Subject: iio: dac: Fix build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m This patch fixes below build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m: drivers/built-in.o: In function `ad5064_i2c_write': drivers/iio/dac/ad5064.c:608: undefined reference to `i2c_master_send' drivers/built-in.o: In function `ad5064_i2c_register_driver': drivers/iio/dac/ad5064.c:646: undefined reference to `i2c_register_driver' drivers/built-in.o: In function `ad5064_i2c_unregister_driver': drivers/iio/dac/ad5064.c:651: undefined reference to `i2c_del_driver' make: *** [vmlinux] Error 1 When CONFIG_I2C=m, meaning we can't build the drivers in with I2C support. Thus don't allow the drivers to be compiled as built-in when CONFIG_I2C=m. The real fix though is to break the driver apart into a SPI part, an I2C part and a common part. But that's something for 3.11 while this is something for 3.10/stable. Reported-by: Wu Fengguang Reported-by: Randy Dunlap Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/dac/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index f4a6f0838327..b61160bd935e 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -5,7 +5,7 @@ menu "Digital to analog converters" config AD5064 tristate "Analog Devices AD5064 and similar multi-channel DAC driver" - depends on (SPI_MASTER || I2C) + depends on (SPI_MASTER && I2C!=m) || I2C help Say yes here to build support for Analog Devices AD5024, AD5025, AD5044, AD5045, AD5064, AD5064-1, AD5065, AD5628, AD5629R, AD5648, AD5666, AD5668, @@ -27,7 +27,7 @@ config AD5360 config AD5380 tristate "Analog Devices AD5380/81/82/83/84/90/91/92 DAC driver" - depends on (SPI_MASTER || I2C) + depends on (SPI_MASTER && I2C!=m) || I2C select REGMAP_I2C if I2C select REGMAP_SPI if SPI_MASTER help @@ -57,7 +57,7 @@ config AD5624R_SPI config AD5446 tristate "Analog Devices AD5446 and similar single channel DACs driver" - depends on (SPI_MASTER || I2C) + depends on (SPI_MASTER && I2C!=m) || I2C help Say yes here to build support for Analog Devices AD5300, AD5301, AD5310, AD5311, AD5320, AD5321, AD5444, AD5446, AD5450, AD5451, AD5452, AD5453, -- cgit v1.2.3 From d61a04dc148db1d0e7fa2307eb0f7abbc44fcd98 Mon Sep 17 00:00:00 2001 From: Denis CIOCCA Date: Thu, 9 May 2013 14:35:00 +0100 Subject: iio:common:st: added disable function after read info raw data Signed-off-by: Denis Ciocca Signed-off-by: Jonathan Cameron --- drivers/iio/common/st_sensors/st_sensors_core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index bd33473f8e38..ed9bc8ae9330 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -312,6 +312,8 @@ int st_sensors_read_info_raw(struct iio_dev *indio_dev, goto read_error; *val = *val >> ch->scan_type.shift; + + err = st_sensors_set_enable(indio_dev, false); } mutex_unlock(&indio_dev->mlock); -- cgit v1.2.3 From 927b4dc3e440a060bd7d9a7ecb83c3dcd80adc84 Mon Sep 17 00:00:00 2001 From: Naveen Krishna Chatradhi Date: Mon, 20 May 2013 07:34:00 +0100 Subject: iio: exynos_adc: fix wrong structure extration in suspend and resume The exynos_adc device structure was wrongly extracted from the dev* correcting the same. Using the regular conversion of struct device* -> struct platform_device* -> struct exynos_adc* seems wrong. Instead we should be doing struct device* -> struct iio_dev* -> struct exynos_adc* Signed-off-by: Naveen Krishna Chatradhi Reviewed-by: Doug Anderson Signed-off-by: Jonathan Cameron --- drivers/iio/adc/exynos_adc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c index 9f3a8ef1fb3e..b3d03d335948 100644 --- a/drivers/iio/adc/exynos_adc.c +++ b/drivers/iio/adc/exynos_adc.c @@ -390,8 +390,8 @@ static int exynos_adc_remove(struct platform_device *pdev) #ifdef CONFIG_PM_SLEEP static int exynos_adc_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct exynos_adc *info = platform_get_drvdata(pdev); + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct exynos_adc *info = iio_priv(indio_dev); u32 con; if (info->version == ADC_V2) { @@ -413,8 +413,8 @@ static int exynos_adc_suspend(struct device *dev) static int exynos_adc_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct exynos_adc *info = platform_get_drvdata(pdev); + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct exynos_adc *info = iio_priv(indio_dev); int ret; ret = regulator_enable(info->vdd); -- cgit v1.2.3 From fb03a43f5fb42000dcc62d91138c1c24fca609b0 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Tue, 21 May 2013 12:57:32 +0000 Subject: tg3: Ensure boot code has completed initialization before accessing hardware After resetting the device, the driver waits for a signature to be updated to know that firmware has completed initialization. However, the call to tg3_poll_fw() is being done too late and we're writing to the GRC_MODE register before it has completely initialized, causing contention with firmware. This logic has existed since day one but is causing PCIE link to go down randomly at startup on one platform once every few hundred reboots. Move the tg3_poll_fw() up to before we write to the GRC_MODE register after reset. Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index e285d7645651..158a7c90db7c 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -8911,6 +8911,10 @@ static int tg3_chip_reset(struct tg3 *tp) tg3_halt_cpu(tp, RX_CPU_BASE); } + err = tg3_poll_fw(tp); + if (err) + return err; + tw32(GRC_MODE, tp->grc_mode); if (tg3_chip_rev_id(tp) == CHIPREV_ID_5705_A0) { @@ -8941,10 +8945,6 @@ static int tg3_chip_reset(struct tg3 *tp) tg3_ape_unlock(tp, TG3_APE_LOCK_GRC); - err = tg3_poll_fw(tp); - if (err) - return err; - tg3_mdio_start(tp); if (tg3_flag(tp, PCI_EXPRESS) && -- cgit v1.2.3 From c2bba067660f71408548e9206bc9be27885a815c Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Tue, 21 May 2013 12:57:33 +0000 Subject: tg3: Update version to 3.132 Signed-off-by: Nithin Nayak Sujir Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 158a7c90db7c..1f2dd928888a 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -94,10 +94,10 @@ static inline void _tg3_flag_clear(enum TG3_FLAGS flag, unsigned long *bits) #define DRV_MODULE_NAME "tg3" #define TG3_MAJ_NUM 3 -#define TG3_MIN_NUM 131 +#define TG3_MIN_NUM 132 #define DRV_MODULE_VERSION \ __stringify(TG3_MAJ_NUM) "." __stringify(TG3_MIN_NUM) -#define DRV_MODULE_RELDATE "April 09, 2013" +#define DRV_MODULE_RELDATE "May 21, 2013" #define RESET_KIND_SHUTDOWN 0 #define RESET_KIND_INIT 1 -- cgit v1.2.3 From 02135582f38e977fd609a7e345d7beb8c9b1c71f Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Tue, 21 May 2013 09:26:59 +0000 Subject: qlcnic: Return proper error codes from probe failure paths Fix error paths in probe to assign proper error codes to probe return value. Signed-off-by: Sony Chacko Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 8fb836d4129f..9a7519faf057 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2016,8 +2016,10 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_enable_pcie_error_reporting(pdev); ahw = kzalloc(sizeof(struct qlcnic_hardware_context), GFP_KERNEL); - if (!ahw) + if (!ahw) { + err = -ENOMEM; goto err_out_free_res; + } switch (ent->device) { case PCI_DEVICE_ID_QLOGIC_QLE824X: @@ -2053,6 +2055,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter->qlcnic_wq = create_singlethread_workqueue("qlcnic"); if (adapter->qlcnic_wq == NULL) { + err = -ENOMEM; dev_err(&pdev->dev, "Failed to create workqueue\n"); goto err_out_free_netdev; } @@ -2133,6 +2136,10 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_disable_msi; } + err = qlcnic_get_act_pci_func(adapter); + if (err) + goto err_out_disable_mbx_intr; + err = qlcnic_setup_netdev(adapter, netdev, pci_using_dac); if (err) goto err_out_disable_mbx_intr; @@ -2162,9 +2169,6 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) break; } - if (qlcnic_get_act_pci_func(adapter)) - goto err_out_disable_mbx_intr; - if (adapter->drv_mac_learn) qlcnic_alloc_lb_filters_mem(adapter); -- cgit v1.2.3 From 0ce54ce4aaef1389fb8d640271748ace257cb763 Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Tue, 21 May 2013 09:27:00 +0000 Subject: qlcnic: remove netdev->trans_start updates within the driver Code is removed because netdev->trans_start updates made by the driver will be ignored by the kernel. Signed-off-by: Sony Chacko Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 2 -- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 4 +--- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c | 1 - 3 files changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index c67d1eb35e8f..5e7fb1dfb97b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -382,8 +382,6 @@ static int qlcnic_83xx_idc_tx_soft_reset(struct qlcnic_adapter *adapter) clear_bit(__QLCNIC_RESETTING, &adapter->state); dev_err(&adapter->pdev->dev, "%s:\n", __func__); - adapter->netdev->trans_start = jiffies; - return 0; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 9a7519faf057..0da38df51793 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -3153,10 +3153,8 @@ qlcnic_check_health(struct qlcnic_adapter *adapter) if (adapter->need_fw_reset) goto detach; - if (adapter->ahw->reset_context && qlcnic_auto_fw_reset) { + if (adapter->ahw->reset_context && qlcnic_auto_fw_reset) qlcnic_reset_hw_context(adapter); - adapter->netdev->trans_start = jiffies; - } return 0; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c index 3869c3864deb..196b2d100407 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c @@ -1734,7 +1734,6 @@ static int qlcnic_sriov_vf_handle_context_reset(struct qlcnic_adapter *adapter) if (!qlcnic_sriov_vf_reinit_driver(adapter)) { qlcnic_sriov_vf_attach(adapter); - adapter->netdev->trans_start = jiffies; adapter->tx_timeo_cnt = 0; adapter->reset_ctx_cnt = 0; adapter->fw_fail_cnt = 0; -- cgit v1.2.3 From 147a90887baa98d73db1fa7ed9e755bf48960c21 Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Tue, 21 May 2013 09:27:01 +0000 Subject: qlcnic: Fix updating netdev->features o After change in EPORT features of 82xx adapter, netdev->features needs to be updated to reflect EPORT feature updates but driver was manipulating netdev->features at wrong place. o This patch uses netdev_update_features() and .ndo_fix_features() to update netdev->features properly. Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 6 +++ drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c | 49 +++++++++++++++++++++-- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 49 ++++------------------- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c | 3 ++ 4 files changed, 61 insertions(+), 46 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 019c5f78732e..c1b693cb3df3 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -907,8 +907,11 @@ struct qlcnic_ipaddr { #define QLCNIC_FW_HANG 0x4000 #define QLCNIC_FW_LRO_MSS_CAP 0x8000 #define QLCNIC_TX_INTR_SHARED 0x10000 +#define QLCNIC_APP_CHANGED_FLAGS 0x20000 #define QLCNIC_IS_MSI_FAMILY(adapter) \ ((adapter)->flags & (QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED)) +#define QLCNIC_IS_TSO_CAPABLE(adapter) \ + ((adapter)->ahw->capabilities & QLCNIC_FW_CAPABILITY_TSO) #define QLCNIC_DEF_NUM_STS_DESC_RINGS 4 #define QLCNIC_MSIX_TBL_SPACE 8192 @@ -1034,6 +1037,7 @@ struct qlcnic_adapter { spinlock_t rx_mac_learn_lock; u32 file_prd_off; /*File fw product offset*/ u32 fw_version; + u32 offload_flags; const struct firmware *fw; }; @@ -1542,6 +1546,8 @@ void qlcnic_add_lb_filter(struct qlcnic_adapter *, struct sk_buff *, int, u16); int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter); int qlcnic_read_mac_addr(struct qlcnic_adapter *); int qlcnic_setup_netdev(struct qlcnic_adapter *, struct net_device *, int); +void qlcnic_set_netdev_features(struct qlcnic_adapter *, + struct qlcnic_esw_func_cfg *); void qlcnic_sriov_vf_schedule_multi(struct net_device *); void qlcnic_vf_add_mc_list(struct net_device *, u16); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 6a6512ba9f38..106a12f2a02f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -973,16 +973,57 @@ int qlcnic_change_mtu(struct net_device *netdev, int mtu) return rc; } +static netdev_features_t qlcnic_process_flags(struct qlcnic_adapter *adapter, + netdev_features_t features) +{ + u32 offload_flags = adapter->offload_flags; + + if (offload_flags & BIT_0) { + features |= NETIF_F_RXCSUM | NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM; + adapter->rx_csum = 1; + if (QLCNIC_IS_TSO_CAPABLE(adapter)) { + if (!(offload_flags & BIT_1)) + features &= ~NETIF_F_TSO; + else + features |= NETIF_F_TSO; + + if (!(offload_flags & BIT_2)) + features &= ~NETIF_F_TSO6; + else + features |= NETIF_F_TSO6; + } + } else { + features &= ~(NETIF_F_RXCSUM | + NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM); + + if (QLCNIC_IS_TSO_CAPABLE(adapter)) + features &= ~(NETIF_F_TSO | NETIF_F_TSO6); + adapter->rx_csum = 0; + } + + return features; +} netdev_features_t qlcnic_fix_features(struct net_device *netdev, netdev_features_t features) { struct qlcnic_adapter *adapter = netdev_priv(netdev); + netdev_features_t changed; - if ((adapter->flags & QLCNIC_ESWITCH_ENABLED) && - qlcnic_82xx_check(adapter)) { - netdev_features_t changed = features ^ netdev->features; - features ^= changed & (NETIF_F_ALL_CSUM | NETIF_F_RXCSUM); + if (qlcnic_82xx_check(adapter) && + (adapter->flags & QLCNIC_ESWITCH_ENABLED)) { + if (adapter->flags & QLCNIC_APP_CHANGED_FLAGS) { + features = qlcnic_process_flags(adapter, features); + } else { + changed = features ^ netdev->features; + features ^= changed & (NETIF_F_RXCSUM | + NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM | + NETIF_F_TSO | + NETIF_F_TSO6); + } } if (!(features & NETIF_F_RXCSUM)) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 0da38df51793..aeb26a850679 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -84,14 +84,9 @@ static int qlcnic_start_firmware(struct qlcnic_adapter *); static void qlcnic_free_lb_filters_mem(struct qlcnic_adapter *adapter); static void qlcnic_dev_set_npar_ready(struct qlcnic_adapter *); static int qlcnicvf_start_firmware(struct qlcnic_adapter *); -static void qlcnic_set_netdev_features(struct qlcnic_adapter *, - struct qlcnic_esw_func_cfg *); static int qlcnic_vlan_rx_add(struct net_device *, __be16, u16); static int qlcnic_vlan_rx_del(struct net_device *, __be16, u16); -#define QLCNIC_IS_TSO_CAPABLE(adapter) \ - ((adapter)->ahw->capabilities & QLCNIC_FW_CAPABILITY_TSO) - static u32 qlcnic_vlan_tx_check(struct qlcnic_adapter *adapter) { struct qlcnic_hardware_context *ahw = adapter->ahw; @@ -1074,8 +1069,6 @@ void qlcnic_set_eswitch_port_features(struct qlcnic_adapter *adapter, if (!esw_cfg->promisc_mode) adapter->flags |= QLCNIC_PROMISC_DISABLED; - - qlcnic_set_netdev_features(adapter, esw_cfg); } int qlcnic_set_eswitch_port_config(struct qlcnic_adapter *adapter) @@ -1090,51 +1083,23 @@ int qlcnic_set_eswitch_port_config(struct qlcnic_adapter *adapter) return -EIO; qlcnic_set_vlan_config(adapter, &esw_cfg); qlcnic_set_eswitch_port_features(adapter, &esw_cfg); + qlcnic_set_netdev_features(adapter, &esw_cfg); return 0; } -static void -qlcnic_set_netdev_features(struct qlcnic_adapter *adapter, - struct qlcnic_esw_func_cfg *esw_cfg) +void qlcnic_set_netdev_features(struct qlcnic_adapter *adapter, + struct qlcnic_esw_func_cfg *esw_cfg) { struct net_device *netdev = adapter->netdev; - unsigned long features, vlan_features; if (qlcnic_83xx_check(adapter)) return; - features = (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM | - NETIF_F_IPV6_CSUM | NETIF_F_GRO); - vlan_features = (NETIF_F_SG | NETIF_F_IP_CSUM | - NETIF_F_IPV6_CSUM); - - if (QLCNIC_IS_TSO_CAPABLE(adapter)) { - features |= (NETIF_F_TSO | NETIF_F_TSO6); - vlan_features |= (NETIF_F_TSO | NETIF_F_TSO6); - } - - if (netdev->features & NETIF_F_LRO) - features |= NETIF_F_LRO; - - if (esw_cfg->offload_flags & BIT_0) { - netdev->features |= features; - adapter->rx_csum = 1; - if (!(esw_cfg->offload_flags & BIT_1)) { - netdev->features &= ~NETIF_F_TSO; - features &= ~NETIF_F_TSO; - } - if (!(esw_cfg->offload_flags & BIT_2)) { - netdev->features &= ~NETIF_F_TSO6; - features &= ~NETIF_F_TSO6; - } - } else { - netdev->features &= ~features; - features &= ~features; - adapter->rx_csum = 0; - } - - netdev->vlan_features = (features & vlan_features); + adapter->offload_flags = esw_cfg->offload_flags; + adapter->flags |= QLCNIC_APP_CHANGED_FLAGS; + netdev_update_features(netdev); + adapter->flags &= ~QLCNIC_APP_CHANGED_FLAGS; } static int diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c index 4e22e794a186..e7a2fe21b649 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c @@ -544,6 +544,9 @@ static ssize_t qlcnic_sysfs_write_esw_config(struct file *file, switch (esw_cfg[i].op_mode) { case QLCNIC_PORT_DEFAULTS: qlcnic_set_eswitch_port_features(adapter, &esw_cfg[i]); + rtnl_lock(); + qlcnic_set_netdev_features(adapter, &esw_cfg[i]); + rtnl_unlock(); break; case QLCNIC_ADD_VLAN: qlcnic_set_vlan_config(adapter, &esw_cfg[i]); -- cgit v1.2.3 From 3680354209dcdeb84671ad3740ef52ab754e05d0 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 19 May 2013 04:38:46 +0000 Subject: net: fec: use a more proper compatible string for MVF type device MVF is a family while MVF600 is a particular SoC in the family. We generally prefer to use SoC rather than family name in compatible string to define a particular type of fec device. And this is how fec_dt_ids works for all those IMX fec variants. Let's change mvf to mvf600 to have it work in the same way. Signed-off-by: Shawn Guo Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 570dfad8403a..85a06037b242 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -109,7 +109,7 @@ static struct platform_device_id fec_devtype[] = { .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT | FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM, }, { - .name = "mvf-fec", + .name = "mvf600-fec", .driver_data = FEC_QUIRK_ENET_MAC, }, { /* sentinel */ @@ -122,7 +122,7 @@ enum imx_fec_type { IMX27_FEC, /* runs on i.mx27/35/51 */ IMX28_FEC, IMX6Q_FEC, - MVF_FEC, + MVF600_FEC, }; static const struct of_device_id fec_dt_ids[] = { @@ -130,7 +130,7 @@ static const struct of_device_id fec_dt_ids[] = { { .compatible = "fsl,imx27-fec", .data = &fec_devtype[IMX27_FEC], }, { .compatible = "fsl,imx28-fec", .data = &fec_devtype[IMX28_FEC], }, { .compatible = "fsl,imx6q-fec", .data = &fec_devtype[IMX6Q_FEC], }, - { .compatible = "fsl,mvf-fec", .data = &fec_devtype[MVF_FEC], }, + { .compatible = "fsl,mvf600-fec", .data = &fec_devtype[MVF600_FEC], }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, fec_dt_ids); -- cgit v1.2.3 From 140c3c6a2bcd2c31e2f7f5a8d59689724776c8e5 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 20 May 2013 14:44:43 +0000 Subject: perf: net_dropmonitor: Fix trace parameter order This works much better if we don't treat protocol numbers as addresses. Cc: stable@vger.kernel.org Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- tools/perf/scripts/python/net_dropmonitor.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/scripts/python/net_dropmonitor.py b/tools/perf/scripts/python/net_dropmonitor.py index a4ffc9500023..adbfbf030576 100755 --- a/tools/perf/scripts/python/net_dropmonitor.py +++ b/tools/perf/scripts/python/net_dropmonitor.py @@ -64,7 +64,7 @@ def trace_end(): # called from perf, when it finds a correspoinding event def skb__kfree_skb(name, context, cpu, sec, nsec, pid, comm, - skbaddr, protocol, location): + skbaddr, location, protocol): slocation = str(location) try: drop_log[slocation] = drop_log[slocation] + 1 -- cgit v1.2.3 From 5a1e99dd2028e00998d42029be86835d8ef4a46e Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 20 May 2013 14:45:26 +0000 Subject: perf: net_dropmonitor: Fix symbol-relative addresses The comparison between traced and symbol addresses is backwards: if the traced address doesn't exactly match a symbol (which we don't expect it to), we'll show the next symbol and the offset to it, whereas we should show the previous symbol and the offset from it. Cc: stable@vger.kernel.org Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- tools/perf/scripts/python/net_dropmonitor.py | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/perf/scripts/python/net_dropmonitor.py b/tools/perf/scripts/python/net_dropmonitor.py index adbfbf030576..4c1160560917 100755 --- a/tools/perf/scripts/python/net_dropmonitor.py +++ b/tools/perf/scripts/python/net_dropmonitor.py @@ -40,9 +40,9 @@ def get_kallsyms_table(): def get_sym(sloc): loc = int(sloc) - for i in kallsyms: - if (i['loc'] >= loc): - return (i['name'], i['loc']-loc) + for i in kallsyms[::-1]: + if loc >= i['loc']: + return (i['name'], loc - i['loc']) return (None, 0) def print_drop_table(): -- cgit v1.2.3 From 326017c757e387007c6629797d7ae22fd33c1317 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 20 May 2013 14:45:34 +0000 Subject: perf: net_dropmonitor: Do not assume ordering of dictionaries The sort order of dictionaries in Python is undocumented. Use tuples instead, which are documented to be lexically ordered. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- tools/perf/scripts/python/net_dropmonitor.py | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/perf/scripts/python/net_dropmonitor.py b/tools/perf/scripts/python/net_dropmonitor.py index 4c1160560917..6acdc82ef47f 100755 --- a/tools/perf/scripts/python/net_dropmonitor.py +++ b/tools/perf/scripts/python/net_dropmonitor.py @@ -32,7 +32,7 @@ def get_kallsyms_table(): j = j +1 if ((j % 100) == 0): print "\r" + str(j) + "/" + str(linecount), - kallsyms.append({ 'loc': loc, 'name' : name}) + kallsyms.append((loc, name)) print "\r" + str(j) + "/" + str(linecount) kallsyms.sort() @@ -40,9 +40,9 @@ def get_kallsyms_table(): def get_sym(sloc): loc = int(sloc) - for i in kallsyms[::-1]: - if loc >= i['loc']: - return (i['name'], loc - i['loc']) + for symloc, name in kallsyms[::-1]: + if loc >= symloc: + return (name, loc - symloc) return (None, 0) def print_drop_table(): -- cgit v1.2.3 From 0ce58bae851dc3728af1c0b83905cd6b4565417a Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 20 May 2013 14:45:42 +0000 Subject: perf: net_dropmonitor: Use bisection in symbol lookup Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- tools/perf/scripts/python/net_dropmonitor.py | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/tools/perf/scripts/python/net_dropmonitor.py b/tools/perf/scripts/python/net_dropmonitor.py index 6acdc82ef47f..32fcee05c0f6 100755 --- a/tools/perf/scripts/python/net_dropmonitor.py +++ b/tools/perf/scripts/python/net_dropmonitor.py @@ -40,10 +40,24 @@ def get_kallsyms_table(): def get_sym(sloc): loc = int(sloc) - for symloc, name in kallsyms[::-1]: - if loc >= symloc: - return (name, loc - symloc) - return (None, 0) + + # Invariant: kallsyms[i][0] <= loc for all 0 <= i <= start + # kallsyms[i][0] > loc for all end <= i < len(kallsyms) + start, end = -1, len(kallsyms) + while end != start + 1: + pivot = (start + end) // 2 + if loc < kallsyms[pivot][0]: + end = pivot + else: + start = pivot + + # Now (start == -1 or kallsyms[start][0] <= loc) + # and (start == len(kallsyms) - 1 or loc < kallsyms[start + 1][0]) + if start >= 0: + symloc, name = kallsyms[start] + return (name, loc - symloc) + else: + return (None, 0) def print_drop_table(): print "%25s %25s %25s" % ("LOCATION", "OFFSET", "COUNT") -- cgit v1.2.3 From 6b75c7357c947dd9fd8482b3395664a9b7385ed5 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 20 May 2013 14:45:57 +0000 Subject: perf: net_dropmonitor: Remove progress indicator We can read /proc/kallsyms in a fraction of a second, so why waste a further fraction of a second showing progress? Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- tools/perf/scripts/python/net_dropmonitor.py | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/tools/perf/scripts/python/net_dropmonitor.py b/tools/perf/scripts/python/net_dropmonitor.py index 32fcee05c0f6..b5740599aabd 100755 --- a/tools/perf/scripts/python/net_dropmonitor.py +++ b/tools/perf/scripts/python/net_dropmonitor.py @@ -15,28 +15,17 @@ kallsyms = [] def get_kallsyms_table(): global kallsyms + try: f = open("/proc/kallsyms", "r") - linecount = 0 - for line in f: - linecount = linecount+1 - f.seek(0) except: return - - j = 0 for line in f: loc = int(line.split()[0], 16) name = line.split()[2] - j = j +1 - if ((j % 100) == 0): - print "\r" + str(j) + "/" + str(linecount), kallsyms.append((loc, name)) - - print "\r" + str(j) + "/" + str(linecount) kallsyms.sort() - return def get_sym(sloc): loc = int(sloc) -- cgit v1.2.3 From bcef9a8f6f1dcff2a9bbe4ee21bfc50cc230984b Mon Sep 17 00:00:00 2001 From: Hans-Christoph Schemmel Date: Tue, 21 May 2013 02:07:17 +0000 Subject: qmi_wwan: Added support for Cinterion's PLxx WWAN Interface MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Added support for Cinterion's PLxx WWAN Interface by adding QMI_FIXED_INTF with Cinterion's Vendor ID as well as Product ID and WWAN Interface Number. Signed-off-by: Hans-Christoph Schemmel Signed-off-by: Christian Schmiedl Acked-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index cf887c2384e9..86adfa0a912e 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -582,6 +582,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */ + {QMI_FIXED_INTF(0x1e2d, 0x12d1, 4)}, /* Cinterion PLxx */ /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ -- cgit v1.2.3 From 0797c3a3e9660682b5df80911f35b523995a40bd Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Wed, 22 May 2013 15:10:15 -0700 Subject: staging: dwc2: remove compile warning for USB_DWC2_TRACK_MISSED_SOFS Remove the compile-time warning for this config option, and instead warn that it is experimental in the Kconfig text Reported-by: Geert Uytterhoeven Signed-off-by: Paul Zimmerman Signed-off-by: Greg Kroah-Hartman --- drivers/staging/dwc2/Kconfig | 1 + drivers/staging/dwc2/hcd_intr.c | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/staging/dwc2/Kconfig b/drivers/staging/dwc2/Kconfig index f0b4739c65a1..609d35c19c35 100644 --- a/drivers/staging/dwc2/Kconfig +++ b/drivers/staging/dwc2/Kconfig @@ -39,6 +39,7 @@ config USB_DWC2_TRACK_MISSED_SOFS bool "Enable Missed SOF Tracking" help Say Y here to enable logging of missed SOF events to the dmesg log. + WARNING: This feature is still experimental. If in doubt, say N. config USB_DWC2_DEBUG_PERIODIC diff --git a/drivers/staging/dwc2/hcd_intr.c b/drivers/staging/dwc2/hcd_intr.c index 6e5dbed6ccec..e24062f0a49e 100644 --- a/drivers/staging/dwc2/hcd_intr.c +++ b/drivers/staging/dwc2/hcd_intr.c @@ -56,8 +56,6 @@ static void dwc2_track_missed_sofs(struct dwc2_hsotg *hsotg) { #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS -#warning Compiling code to track missed SOFs - u16 curr_frame_number = hsotg->frame_number; if (hsotg->frame_num_idx < FRAME_NUM_ARRAY_SIZE) { -- cgit v1.2.3 From c8f6d8351ba8c89d5cd4c562552ec7ec29274e31 Mon Sep 17 00:00:00 2001 From: Bastian Triller Date: Sun, 19 May 2013 11:52:33 +0000 Subject: ACPI / video: Add "Asus UL30A" to ACPI video detect blacklist Like on UL30VT, the ACPI video driver can't control backlight correctly on Asus UL30A. Vendor driver (asus-laptop) can work. This patch is to add "Asus UL30A" to ACPI video detect blacklist in order to use asus-laptop for video control on the "Asus UL30A" rather than ACPI video driver. Signed-off-by: Bastian Triller Cc: All Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video_detect.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index 66f67626f02e..e6bd910bc6ed 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -161,6 +161,14 @@ static struct dmi_system_id video_detect_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "UL30VT"), }, }, + { + .callback = video_detect_force_vendor, + .ident = "Asus UL30A", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "UL30A"), + }, + }, { }, }; -- cgit v1.2.3 From f538881cc672c1b049aa0a34a792d0953fcecba5 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 16 May 2013 12:19:29 +0530 Subject: ARC: [mm] Prevent stray dcache lines after__sync_icache_dcach() Flush and INVALIDATE the dcache page. This helper is only used for writeback of CODE pages to memory. So there's no value in keeping the dcache lines around. Infact it is risky as a writeback on natural eviction under pressure can cause un-needed writeback with weird issues on aliasing dcache configurations. Signed-off-by: Vineet Gupta --- arch/arc/mm/cache_arc700.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index 2f12bca8aef3..d4b7bb616840 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -610,7 +610,7 @@ void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len) local_irq_save(flags); __ic_line_inv_vaddr(paddr, vaddr, len); - __dc_line_op(paddr, vaddr, len, OP_FLUSH); + __dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV); local_irq_restore(flags); } -- cgit v1.2.3 From a950549c675f2c8c504469dec7d780da8a6433dc Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 21 May 2013 15:25:11 +0530 Subject: ARC: copy_(to|from)_user() to honor usermode-access permissions This manifested as grep failing psuedo-randomly: -------------->8--------------------- [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ [ARCLinux]$ ip address show lo | grep inet inet 127.0.0.1/8 scope host lo -------------->8--------------------- ARC700 MMU provides fully orthogonal permission bits per page: Ur, Uw, Ux, Kr, Kw, Kx The user mode page permission templates used to have all Kernel mode access bits enabled. This caused a tricky race condition observed with uClibc buffered file read and UNIX pipes. 1. Read access to an anon mapped page in libc .bss: write-protected zero_page mapped: TLB Entry installed with Ur + K[rwx] 2. grep calls libc:getc() -> buffered read layer calls read(2) with the internal read buffer in same .bss page. The read() call is on STDIN which has been redirected to a pipe. read(2) => sys_read() => pipe_read() => copy_to_user() 3. Since page has Kernel-write permission (despite being user-mode write-protected), copy_to_user() suceeds w/o taking a MMU TLB-Miss Exception (page-fault for ARC). core-MM is unaware that kernel erroneously wrote to the reserved read-only zero-page (BUG #1) 4. Control returns to userspace which now does a write to same .bss page Since Linux MM is not aware that page has been modified by kernel, it simply reassigns a new writable zero-init page to mapping, loosing the prior write by kernel - effectively zero'ing out the libc read buffer under the hood - hence grep doesn't see right data (BUG #2) The fix is to make all kernel-mode access permissions mirror the user-mode ones. Note that the kernel still has full access to pages, when accessed directly (w/o MMU) - this fix ensures that kernel-mode access in copy_to_from() path uses the same faulting access model as for pure user accesses to keep MM fully aware of page state. The issue is peudo-random because it only shows up if the TLB entry installed in #1 is present at the time of #3. If it is evicted out, due to TLB pressure or some-such, then copy_to_user() does take a TLB Miss Exception, with a routine write-to-anon COW processing installing a fresh page for kernel writes and also usable as it is in userspace. Further the issue was dormant for so long as it depends on where the libc internal read buffer (in .bss) is mapped at runtime. If it happens to reside in file-backed data mapping of libc (in the page-aligned slack space trailing the file backed data), loader zero padding the slack space, does the early cow page replacement, setting things up at the very beginning itself. With gcc 4.8 based builds, the libc buffer got pushed out to a real anon mapping which triggers the issue. Reported-by: Anton Kolesov Cc: # 3.9 Signed-off-by: Vineet Gupta --- arch/arc/include/asm/pgtable.h | 26 +++++++++++++++----------- arch/arc/include/asm/tlb.h | 2 +- arch/arc/mm/tlbex.S | 6 +++--- 3 files changed, 19 insertions(+), 15 deletions(-) diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index 1cc4720faccb..95b1522212a7 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -57,9 +57,9 @@ #define _PAGE_ACCESSED (1<<1) /* Page is accessed (S) */ #define _PAGE_CACHEABLE (1<<2) /* Page is cached (H) */ -#define _PAGE_EXECUTE (1<<3) /* Page has user execute perm (H) */ -#define _PAGE_WRITE (1<<4) /* Page has user write perm (H) */ -#define _PAGE_READ (1<<5) /* Page has user read perm (H) */ +#define _PAGE_U_EXECUTE (1<<3) /* Page has user execute perm (H) */ +#define _PAGE_U_WRITE (1<<4) /* Page has user write perm (H) */ +#define _PAGE_U_READ (1<<5) /* Page has user read perm (H) */ #define _PAGE_K_EXECUTE (1<<6) /* Page has kernel execute perm (H) */ #define _PAGE_K_WRITE (1<<7) /* Page has kernel write perm (H) */ #define _PAGE_K_READ (1<<8) /* Page has kernel perm (H) */ @@ -72,9 +72,9 @@ /* PD1 */ #define _PAGE_CACHEABLE (1<<0) /* Page is cached (H) */ -#define _PAGE_EXECUTE (1<<1) /* Page has user execute perm (H) */ -#define _PAGE_WRITE (1<<2) /* Page has user write perm (H) */ -#define _PAGE_READ (1<<3) /* Page has user read perm (H) */ +#define _PAGE_U_EXECUTE (1<<1) /* Page has user execute perm (H) */ +#define _PAGE_U_WRITE (1<<2) /* Page has user write perm (H) */ +#define _PAGE_U_READ (1<<3) /* Page has user read perm (H) */ #define _PAGE_K_EXECUTE (1<<4) /* Page has kernel execute perm (H) */ #define _PAGE_K_WRITE (1<<5) /* Page has kernel write perm (H) */ #define _PAGE_K_READ (1<<6) /* Page has kernel perm (H) */ @@ -93,7 +93,8 @@ #endif /* Kernel allowed all permissions for all pages */ -#define _K_PAGE_PERMS (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ) +#define _K_PAGE_PERMS (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ | \ + _PAGE_GLOBAL | _PAGE_PRESENT) #ifdef CONFIG_ARC_CACHE_PAGES #define _PAGE_DEF_CACHEABLE _PAGE_CACHEABLE @@ -106,7 +107,11 @@ * -by default cached, unless config otherwise * -present in memory */ -#define ___DEF (_PAGE_PRESENT | _K_PAGE_PERMS | _PAGE_DEF_CACHEABLE) +#define ___DEF (_PAGE_PRESENT | _PAGE_DEF_CACHEABLE) + +#define _PAGE_READ (_PAGE_U_READ | _PAGE_K_READ) +#define _PAGE_WRITE (_PAGE_U_WRITE | _PAGE_K_WRITE) +#define _PAGE_EXECUTE (_PAGE_U_EXECUTE | _PAGE_K_EXECUTE) /* Set of bits not changed in pte_modify */ #define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED) @@ -125,11 +130,10 @@ * kernel vaddr space - visible in all addr spaces, but kernel mode only * Thus Global, all-kernel-access, no-user-access, cached */ -#define PAGE_KERNEL __pgprot(___DEF | _PAGE_GLOBAL) +#define PAGE_KERNEL __pgprot(_K_PAGE_PERMS | _PAGE_DEF_CACHEABLE) /* ioremap */ -#define PAGE_KERNEL_NO_CACHE __pgprot(_PAGE_PRESENT | _K_PAGE_PERMS | \ - _PAGE_GLOBAL) +#define PAGE_KERNEL_NO_CACHE __pgprot(_K_PAGE_PERMS) /************************************************************************** * Mapping of vm_flags (Generic VM) to PTE flags (arch specific) diff --git a/arch/arc/include/asm/tlb.h b/arch/arc/include/asm/tlb.h index 85b6df839bd7..cb0c708ca665 100644 --- a/arch/arc/include/asm/tlb.h +++ b/arch/arc/include/asm/tlb.h @@ -16,7 +16,7 @@ /* Masks for actual TLB "PD"s */ #define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT) #define PTE_BITS_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE | \ - _PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ | \ + _PAGE_U_EXECUTE | _PAGE_U_WRITE | _PAGE_U_READ | \ _PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ) #ifndef __ASSEMBLY__ diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S index 9df765dc7c3a..3357d26ffe54 100644 --- a/arch/arc/mm/tlbex.S +++ b/arch/arc/mm/tlbex.S @@ -277,7 +277,7 @@ ARC_ENTRY EV_TLBMissI ;---------------------------------------------------------------- ; VERIFY_PTE: Check if PTE permissions approp for executing code cmp_s r2, VMALLOC_START - mov.lo r2, (_PAGE_PRESENT | _PAGE_READ | _PAGE_EXECUTE) + mov.lo r2, (_PAGE_PRESENT | _PAGE_U_READ | _PAGE_U_EXECUTE) mov.hs r2, (_PAGE_PRESENT | _PAGE_K_READ | _PAGE_K_EXECUTE) and r3, r0, r2 ; Mask out NON Flag bits from PTE @@ -320,9 +320,9 @@ ARC_ENTRY EV_TLBMissD mov_s r2, 0 lr r3, [ecr] btst_s r3, ECR_C_BIT_DTLB_LD_MISS ; Read Access - or.nz r2, r2, _PAGE_READ ; chk for Read flag in PTE + or.nz r2, r2, _PAGE_U_READ ; chk for Read flag in PTE btst_s r3, ECR_C_BIT_DTLB_ST_MISS ; Write Access - or.nz r2, r2, _PAGE_WRITE ; chk for Write flag in PTE + or.nz r2, r2, _PAGE_U_WRITE ; chk for Write flag in PTE ; Above laddering takes care of XCHG access ; which is both Read and Write -- cgit v1.2.3 From da2e2c214953f37c2a6be20226537ca5a329724c Mon Sep 17 00:00:00 2001 From: Emilio López Date: Wed, 22 May 2013 13:57:35 +0000 Subject: net: ethernet: apple: drop unused variable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 3b0aaef ("net: ethernet: apple: initialize variables directly") dropped the only loop that was using i but did not remove the actual variable, therefore causing a warning when building. This patch drops the now redundant line. Signed-off-by: Emilio López Signed-off-by: David S. Miller --- drivers/net/ethernet/apple/bmac.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/apple/bmac.c b/drivers/net/ethernet/apple/bmac.c index f36bbd6d5085..8848190e403d 100644 --- a/drivers/net/ethernet/apple/bmac.c +++ b/drivers/net/ethernet/apple/bmac.c @@ -1016,7 +1016,6 @@ static void bmac_set_multicast(struct net_device *dev) static void bmac_set_multicast(struct net_device *dev) { struct netdev_hw_addr *ha; - int i; unsigned short rx_cfg; u32 crc; -- cgit v1.2.3 From 1a5904342c7380ceddd61c0b37544d752d0b1433 Mon Sep 17 00:00:00 2001 From: Emilio López Date: Wed, 22 May 2013 13:57:36 +0000 Subject: net: ethernet: korina: drop unused variable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit e998fd4 ("net: ethernet: korina: initialize variables directly") dropped the only loop that was using i but did not remove the actual variable, therefore causing a warning when building. This patch drops the now redundant line. Signed-off-by: Emilio López Signed-off-by: David S. Miller --- drivers/net/ethernet/korina.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c index 5409fe876a44..907e94a3fb06 100644 --- a/drivers/net/ethernet/korina.c +++ b/drivers/net/ethernet/korina.c @@ -483,7 +483,6 @@ static void korina_multicast_list(struct net_device *dev) unsigned long flags; struct netdev_hw_addr *ha; u32 recognise = ETH_ARC_AB; /* always accept broadcasts */ - int i; /* Set promiscuous mode */ if (dev->flags & IFF_PROMISC) -- cgit v1.2.3 From c573972c111eb4c6b3f3250ad71e7c75cc799833 Mon Sep 17 00:00:00 2001 From: Emilio López Date: Wed, 22 May 2013 13:57:37 +0000 Subject: net: ethernet: sun: drop unused variable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit bfd428d ("net: ethernet: sun: initialize variables directly") dropped the only loop that was using i but did not remove the actual variable, therefore causing a warning when building. This patch drops the now redundant line. Reported-by: Stephen Rothwell Signed-off-by: Emilio López Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/sunbmac.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/sun/sunbmac.c b/drivers/net/ethernet/sun/sunbmac.c index 054975939a18..85d3b6bec160 100644 --- a/drivers/net/ethernet/sun/sunbmac.c +++ b/drivers/net/ethernet/sun/sunbmac.c @@ -995,7 +995,6 @@ static void bigmac_set_multicast(struct net_device *dev) struct bigmac *bp = netdev_priv(dev); void __iomem *bregs = bp->bregs; struct netdev_hw_addr *ha; - int i; u32 tmp, crc; /* Disable the receiver. The bit self-clears when -- cgit v1.2.3 From 35f079ebbc860dcd1cca70890c9c8d59c1145525 Mon Sep 17 00:00:00 2001 From: Nandita Dukkipati Date: Tue, 21 May 2013 15:12:07 +0000 Subject: tcp: bug fix in proportional rate reduction. This patch is a fix for a bug triggering newly_acked_sacked < 0 in tcp_ack(.). The bug is triggered by sacked_out decreasing relative to prior_sacked, but packets_out remaining the same as pior_packets. This is because the snapshot of prior_packets is taken after tcp_sacktag_write_queue() while prior_sacked is captured before tcp_sacktag_write_queue(). The problem is: tcp_sacktag_write_queue (tcp_match_skb_to_sack() -> tcp_fragment) adjusts the pcount for packets_out and sacked_out (MSS change or other reason). As a result, this delta in pcount is reflected in (prior_sacked - sacked_out) but not in (prior_packets - packets_out). This patch does the following: 1) initializes prior_packets at the start of tcp_ack() so as to capture the delta in packets_out created by tcp_fragment. 2) introduces a new "previous_packets_out" variable that snapshots packets_out right before tcp_clean_rtx_queue, so pkts_acked can be correctly computed as before. 3) Computes pkts_acked using previous_packets_out, and computes newly_acked_sacked using prior_packets. Signed-off-by: Nandita Dukkipati Acked-by: Yuchung Cheng Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 08bbe6096528..9c6225780bd5 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -2743,8 +2743,8 @@ static void tcp_process_loss(struct sock *sk, int flag, bool is_dupack) * tcp_xmit_retransmit_queue(). */ static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked, - int prior_sacked, bool is_dupack, - int flag) + int prior_sacked, int prior_packets, + bool is_dupack, int flag) { struct inet_connection_sock *icsk = inet_csk(sk); struct tcp_sock *tp = tcp_sk(sk); @@ -2804,7 +2804,8 @@ static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked, tcp_add_reno_sack(sk); } else do_lost = tcp_try_undo_partial(sk, pkts_acked); - newly_acked_sacked = pkts_acked + tp->sacked_out - prior_sacked; + newly_acked_sacked = prior_packets - tp->packets_out + + tp->sacked_out - prior_sacked; break; case TCP_CA_Loss: tcp_process_loss(sk, flag, is_dupack); @@ -2818,7 +2819,8 @@ static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked, if (is_dupack) tcp_add_reno_sack(sk); } - newly_acked_sacked = pkts_acked + tp->sacked_out - prior_sacked; + newly_acked_sacked = prior_packets - tp->packets_out + + tp->sacked_out - prior_sacked; if (icsk->icsk_ca_state <= TCP_CA_Disorder) tcp_try_undo_dsack(sk); @@ -3330,9 +3332,10 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) bool is_dupack = false; u32 prior_in_flight; u32 prior_fackets; - int prior_packets; + int prior_packets = tp->packets_out; int prior_sacked = tp->sacked_out; int pkts_acked = 0; + int previous_packets_out = 0; /* If the ack is older than previous acks * then we can probably ignore it. @@ -3403,14 +3406,14 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) sk->sk_err_soft = 0; icsk->icsk_probes_out = 0; tp->rcv_tstamp = tcp_time_stamp; - prior_packets = tp->packets_out; if (!prior_packets) goto no_queue; /* See if we can take anything off of the retransmit queue. */ + previous_packets_out = tp->packets_out; flag |= tcp_clean_rtx_queue(sk, prior_fackets, prior_snd_una); - pkts_acked = prior_packets - tp->packets_out; + pkts_acked = previous_packets_out - tp->packets_out; if (tcp_ack_is_dubious(sk, flag)) { /* Advance CWND, if state allows this. */ @@ -3418,7 +3421,7 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) tcp_cong_avoid(sk, ack, prior_in_flight); is_dupack = !(flag & (FLAG_SND_UNA_ADVANCED | FLAG_NOT_DUP)); tcp_fastretrans_alert(sk, pkts_acked, prior_sacked, - is_dupack, flag); + prior_packets, is_dupack, flag); } else { if (flag & FLAG_DATA_ACKED) tcp_cong_avoid(sk, ack, prior_in_flight); @@ -3441,7 +3444,7 @@ no_queue: /* If data was DSACKed, see if we can undo a cwnd reduction. */ if (flag & FLAG_DSACKING_ACK) tcp_fastretrans_alert(sk, pkts_acked, prior_sacked, - is_dupack, flag); + prior_packets, is_dupack, flag); /* If this ack opens up a zero window, clear backoff. It was * being used to time the probes, and is probably far higher than * it needs to be for normal retransmission. @@ -3464,7 +3467,7 @@ old_ack: if (TCP_SKB_CB(skb)->sacked) { flag |= tcp_sacktag_write_queue(sk, skb, prior_snd_una); tcp_fastretrans_alert(sk, pkts_acked, prior_sacked, - is_dupack, flag); + prior_packets, is_dupack, flag); } SOCK_DEBUG(sk, "Ack %u before %u:%u\n", ack, tp->snd_una, tp->snd_nxt); -- cgit v1.2.3 From e4166625edfd2d808ddda00c7e7e901f4f3b8cc0 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Tue, 21 May 2013 20:03:58 +0000 Subject: virtio_net: enable napi for all possible queues during open Commit 55257d72bd1c51f25106350f4983ec19f62ed1fa (virtio-net: fill only rx queues which are being used) only does the napi enabling during open for curr_queue_pairs. This will break multiqueue receiving since napi of new queues were still disabled after changing the number of queues. This patch fixes this by enabling napi for all possible queues during open. Cc: Sasha Levin Signed-off-by: Jason Wang Acked-by: Rusty Russell Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 655bb25eed2b..c9e00387d999 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -636,10 +636,11 @@ static int virtnet_open(struct net_device *dev) struct virtnet_info *vi = netdev_priv(dev); int i; - for (i = 0; i < vi->curr_queue_pairs; i++) { - /* Make sure we have some buffers: if oom use wq. */ - if (!try_fill_recv(&vi->rq[i], GFP_KERNEL)) - schedule_delayed_work(&vi->refill, 0); + for (i = 0; i < vi->max_queue_pairs; i++) { + if (i < vi->curr_queue_pairs) + /* Make sure we have some buffers: if oom use wq. */ + if (!try_fill_recv(&vi->rq[i], GFP_KERNEL)) + schedule_delayed_work(&vi->refill, 0); virtnet_napi_enable(&vi->rq[i]); } -- cgit v1.2.3 From 497574c72c9922cf20c12aed15313c389f722fa0 Mon Sep 17 00:00:00 2001 From: Timo Teräs Date: Wed, 22 May 2013 01:40:47 +0000 Subject: xfrm: properly handle invalid states as an error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The error exit path needs err explicitly set. Otherwise it returns success and the only caller, xfrm_output_resume(), would oops in skb_dst(skb)->ops derefence as skb_dst(skb) is NULL. Bug introduced in commit bb65a9cb (xfrm: removes a superfluous check and add a statistic). Signed-off-by: Timo Teräs Cc: Li RongQing Cc: Steffen Klassert Signed-off-by: David S. Miller --- net/xfrm/xfrm_output.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c index bcfda8921b5b..0cf003dfa8fc 100644 --- a/net/xfrm/xfrm_output.c +++ b/net/xfrm/xfrm_output.c @@ -64,6 +64,7 @@ static int xfrm_output_one(struct sk_buff *skb, int err) if (unlikely(x->km.state != XFRM_STATE_VALID)) { XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTSTATEINVALID); + err = -EINVAL; goto error; } -- cgit v1.2.3 From 3e87974dec5ec25a8a4852d9292db6be659164e6 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 22 May 2013 18:38:10 +0530 Subject: ARC: Brown paper bag bug in macro for checking cache color The VM_EXEC check in update_mmu_cache() was getting optimized away because of a stupid error in definition of macro addr_not_cache_congruent() The intention was to have the equivalent of following: if (a || (1 ? b : 0)) but we ended up with following: if (a || 1 ? b : 0) And because precedence of '||' is more that that of '?', gcc was optimizing away evaluation of Nasty Repercussions: 1. For non-aliasing configs it would mean some extraneous dcache flushes for non-code pages if U/K mappings were not congruent. 2. For aliasing config, some needed dcache flush for code pages might be missed if U/K mappings were congruent. Signed-off-by: Vineet Gupta --- arch/arc/include/asm/cacheflush.h | 4 +++- arch/arc/mm/tlb.c | 3 ++- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h index 9f841af41092..7d819749478c 100644 --- a/arch/arc/include/asm/cacheflush.h +++ b/arch/arc/include/asm/cacheflush.h @@ -99,8 +99,10 @@ static inline int cache_is_vipt_aliasing(void) * checks if two addresses (after page aligning) index into same cache set */ #define addr_not_cache_congruent(addr1, addr2) \ +({ \ cache_is_vipt_aliasing() ? \ - (CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0 \ + (CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0; \ +}) #define copy_to_user_page(vma, page, vaddr, dst, src, len) \ do { \ diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index 066145b5f348..fe1c5a073afe 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -444,7 +444,8 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned, * so userspace sees the right data. * (Avoids the flush for Non-exec + congruent mapping case) */ - if (vma->vm_flags & VM_EXEC || addr_not_cache_congruent(paddr, vaddr)) { + if ((vma->vm_flags & VM_EXEC) || + addr_not_cache_congruent(paddr, vaddr)) { struct page *page = pfn_to_page(pte_pfn(*ptep)); int dirty = test_and_clear_bit(PG_arch_1, &page->flags); -- cgit v1.2.3 From 006dfb3c9c44192f06093d65b3a876fa5ad1319a Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sun, 19 May 2013 14:06:44 +0530 Subject: ARC: Use enough bits for determining page's cache color The current code uses 2 bits for determining page's dcache color, thus sorting pages into 4 bins, whereas the aliasing dcache really has 2 bins (8k page, 64k dcache - 4 way-set-assoc). This can cause extraneous flushes - e.g. color 0 and 2. Signed-off-by: Vineet Gupta --- arch/arc/include/asm/cacheflush.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h index 7d819749478c..ef62682e8d95 100644 --- a/arch/arc/include/asm/cacheflush.h +++ b/arch/arc/include/asm/cacheflush.h @@ -93,7 +93,7 @@ static inline int cache_is_vipt_aliasing(void) #endif } -#define CACHE_COLOR(addr) (((unsigned long)(addr) >> (PAGE_SHIFT)) & 3) +#define CACHE_COLOR(addr) (((unsigned long)(addr) >> (PAGE_SHIFT)) & 1) /* * checks if two addresses (after page aligning) index into same cache set -- cgit v1.2.3 From c73a1afbe6dce11b6e249d0eee69b90dc24daa88 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Tue, 14 May 2013 23:34:53 -0700 Subject: Input: wacom - add an eraser to DTH2242/DTK2241 plus send begin and end of express keys events for Cintiq 13HD and DTH2242/DTK2241 Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 3b6998a27a3f..5c68e4486845 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -362,7 +362,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom) case 0x100804: /* Intuos4/5 13HD/24HD Art Pen */ case 0x140802: /* Intuos4/5 13HD/24HD Classic Pen */ case 0x160802: /* Cintiq 13HD Pro Pen */ - case 0x180802: /* DTH2242 Grip Pen */ + case 0x180802: /* DTH2242 Pen */ wacom->tool[idx] = BTN_TOOL_PEN; break; @@ -400,6 +400,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom) case 0x10090a: /* Intuos4/5 13HD/24HD Airbrush Eraser */ case 0x10080c: /* Intuos4/5 13HD/24HD Art Pen Eraser */ case 0x16080a: /* Cintiq 13HD Pro Pen Eraser */ + case 0x18080a: /* DTH2242 Eraser */ wacom->tool[idx] = BTN_TOOL_RUBBER; break; @@ -550,6 +551,11 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) input_report_key(input, BTN_3, (data[6] & 0x08)); input_report_key(input, BTN_4, (data[6] & 0x10)); input_report_key(input, BTN_5, (data[6] & 0x20)); + if (data[6] & 0x3f) { + input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); + } else { + input_report_abs(input, ABS_MISC, 0); + } } else if (features->type == WACOM_13HD) { input_report_key(input, BTN_0, (data[3] & 0x01)); input_report_key(input, BTN_1, (data[4] & 0x01)); @@ -560,6 +566,11 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) input_report_key(input, BTN_6, (data[4] & 0x20)); input_report_key(input, BTN_7, (data[4] & 0x40)); input_report_key(input, BTN_8, (data[4] & 0x80)); + if ((data[3] & 0x01) | data[4]) { + input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); + } else { + input_report_abs(input, ABS_MISC, 0); + } } else if (features->type == WACOM_24HD) { input_report_key(input, BTN_0, (data[6] & 0x01)); input_report_key(input, BTN_1, (data[6] & 0x02)); @@ -1539,15 +1550,15 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(KEY_PROG1, input_dev->keybit); __set_bit(KEY_PROG2, input_dev->keybit); __set_bit(KEY_PROG3, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); /* fall through */ case DTK: for (i = 0; i < 6; i++) __set_bit(BTN_0 + i, input_dev->keybit); - input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); - input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); - __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); wacom_setup_cintiq(wacom_wac); -- cgit v1.2.3 From b4d3ba3346f092b9185da991414775281ceacaac Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 22 May 2013 22:46:09 -0700 Subject: lib: make iovec obj instead of lib Fix build error io vmw_vmci.ko when CONFIG_VMWARE_VMCI=m by chaning iovec.o from lib-y to obj-y. ERROR: "memcpy_toiovec" [drivers/misc/vmw_vmci/vmw_vmci.ko] undefined! ERROR: "memcpy_fromiovec" [drivers/misc/vmw_vmci/vmw_vmci.ko] undefined! Signed-off-by: Randy Dunlap Acked-by: Rusty Russell Signed-off-by: Linus Torvalds --- lib/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lib/Makefile b/lib/Makefile index 237721165035..c55a037a354e 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -9,7 +9,7 @@ endif lib-y := ctype.o string.o vsprintf.o cmdline.o \ rbtree.o radix-tree.o dump_stack.o timerqueue.o\ - idr.o int_sqrt.o extable.o iovec.o \ + idr.o int_sqrt.o extable.o \ sha1.o md5.o irq_regs.o reciprocal_div.o argv_split.o \ proportions.o flex_proportions.o prio_heap.o ratelimit.o show_mem.o \ is_single_threaded.o plist.o decompress.o kobject_uevent.o \ @@ -23,7 +23,7 @@ lib-y += kobject.o klist.o obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \ bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \ - gcd.o lcm.o list_sort.o uuid.o flex_array.o \ + gcd.o lcm.o list_sort.o uuid.o flex_array.o iovec.o \ bsearch.o find_last_bit.o find_next_bit.o llist.o memweight.o kfifo.o obj-y += string_helpers.o obj-$(CONFIG_TEST_STRING_HELPERS) += test-string_helpers.o -- cgit v1.2.3 From 7a1a0cbfeb31f20acc10722642198e76bbc30cb9 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 23 May 2013 12:15:32 -0700 Subject: net: Revert unused variable changes. This reverts commits: c573972c111eb4c6b3f3250ad71e7c75cc799833 1a5904342c7380ceddd61c0b37544d752d0b1433 da2e2c214953f37c2a6be20226537ca5a329724c They were meant for net-next not net. Signed-off-by: David S. Miller --- drivers/net/ethernet/apple/bmac.c | 1 + drivers/net/ethernet/korina.c | 1 + drivers/net/ethernet/sun/sunbmac.c | 1 + 3 files changed, 3 insertions(+) diff --git a/drivers/net/ethernet/apple/bmac.c b/drivers/net/ethernet/apple/bmac.c index 8848190e403d..f36bbd6d5085 100644 --- a/drivers/net/ethernet/apple/bmac.c +++ b/drivers/net/ethernet/apple/bmac.c @@ -1016,6 +1016,7 @@ static void bmac_set_multicast(struct net_device *dev) static void bmac_set_multicast(struct net_device *dev) { struct netdev_hw_addr *ha; + int i; unsigned short rx_cfg; u32 crc; diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c index 907e94a3fb06..5409fe876a44 100644 --- a/drivers/net/ethernet/korina.c +++ b/drivers/net/ethernet/korina.c @@ -483,6 +483,7 @@ static void korina_multicast_list(struct net_device *dev) unsigned long flags; struct netdev_hw_addr *ha; u32 recognise = ETH_ARC_AB; /* always accept broadcasts */ + int i; /* Set promiscuous mode */ if (dev->flags & IFF_PROMISC) diff --git a/drivers/net/ethernet/sun/sunbmac.c b/drivers/net/ethernet/sun/sunbmac.c index 85d3b6bec160..054975939a18 100644 --- a/drivers/net/ethernet/sun/sunbmac.c +++ b/drivers/net/ethernet/sun/sunbmac.c @@ -995,6 +995,7 @@ static void bigmac_set_multicast(struct net_device *dev) struct bigmac *bp = netdev_priv(dev); void __iomem *bregs = bp->bregs; struct netdev_hw_addr *ha; + int i; u32 tmp, crc; /* Disable the receiver. The bit self-clears when -- cgit v1.2.3 From 83c168bf8017212a9d502536f9dcd0b54d24e330 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Wed, 15 May 2013 22:00:10 -0400 Subject: NFS: Fix SETCLIENTID fallback if GSS is not available Commit 79d852bf "NFS: Retry SETCLIENTID with AUTH_SYS instead of AUTH_NONE" did not take into account commit 23631227 "NFSv4: Fix the fallback to AUTH_NULL if krb5i is not available". Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- fs/nfs/nfs4client.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c index 947b0c908aa9..4cbad5d6b276 100644 --- a/fs/nfs/nfs4client.c +++ b/fs/nfs/nfs4client.c @@ -203,7 +203,7 @@ struct nfs_client *nfs4_init_client(struct nfs_client *clp, __set_bit(NFS_CS_DISCRTRY, &clp->cl_flags); error = nfs_create_rpc_client(clp, timeparms, RPC_AUTH_GSS_KRB5I); if (error == -EINVAL) - error = nfs_create_rpc_client(clp, timeparms, RPC_AUTH_NULL); + error = nfs_create_rpc_client(clp, timeparms, RPC_AUTH_UNIX); if (error < 0) goto error; -- cgit v1.2.3 From 547669d483e5783d722772af1483fa474da7caf9 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 23 May 2013 07:44:20 +0000 Subject: tcp: xps: fix reordering issues commit 3853b5841c01a ("xps: Improvements in TX queue selection") introduced ooo_okay flag, but the condition to set it is slightly wrong. In our traces, we have seen ACK packets being received out of order, and RST packets sent in response. We should test if we have any packets still in host queue. Signed-off-by: Eric Dumazet Cc: Tom Herbert Cc: Yuchung Cheng Cc: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 536d40929ba6..ec335fabd5cc 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -874,11 +874,13 @@ static int tcp_transmit_skb(struct sock *sk, struct sk_buff *skb, int clone_it, &md5); tcp_header_size = tcp_options_size + sizeof(struct tcphdr); - if (tcp_packets_in_flight(tp) == 0) { + if (tcp_packets_in_flight(tp) == 0) tcp_ca_event(sk, CA_EVENT_TX_START); - skb->ooo_okay = 1; - } else - skb->ooo_okay = 0; + + /* if no packet is in qdisc/device queue, then allow XPS to select + * another queue. + */ + skb->ooo_okay = sk_wmem_alloc_get(sk) == 0; skb_push(skb, tcp_header_size); skb_reset_transport_header(skb); -- cgit v1.2.3 From 950e2958a5e96406e6e5ff4190a638a54769f89b Mon Sep 17 00:00:00 2001 From: Wei Yang Date: Wed, 22 May 2013 15:58:22 +0000 Subject: be2net: bug fix on returning an invalid nic descriptor In function be_get_nic_desc(), it will go through the descriptor array returned from f/w. By comparing the desc_type field, it determines whether there is a nic descriptor in the array or not. In the case of no nic descriptor, this function should return NULL. The code may return an invalide descriptor, when there is no nic descriptor in the array and the desc_count is less than MAX_RESOURCE_DESC. In this case, even there is no nic descriptor, it will still return the lase descriptor since the i doesn't equal to MAX_RESOURCE_DESC. This patch fix this issue by returning the descriptor when find it and return NULL for other cases. Signed-off-by: Wei Yang Reviewed-by: Gavin Shan Reviewed-by: Xiao Guangrong Acked-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index fd7b547698ab..a236ecd27cf3 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -2976,22 +2976,17 @@ static struct be_nic_resource_desc *be_get_nic_desc(u8 *buf, u32 desc_count, for (i = 0; i < desc_count; i++) { desc->desc_len = desc->desc_len ? : RESOURCE_DESC_SIZE; if (((void *)desc + desc->desc_len) > - (void *)(buf + max_buf_size)) { - desc = NULL; - break; - } + (void *)(buf + max_buf_size)) + return NULL; if (desc->desc_type == NIC_RESOURCE_DESC_TYPE_V0 || desc->desc_type == NIC_RESOURCE_DESC_TYPE_V1) - break; + return desc; desc = (void *)desc + desc->desc_len; } - if (!desc || i == MAX_RESOURCE_DESC) - return NULL; - - return desc; + return NULL; } /* Uses Mbox */ -- cgit v1.2.3 From 1ad936e850a896bc16e0d72a56be432f9954ad7e Mon Sep 17 00:00:00 2001 From: Kent Yoder Date: Fri, 12 Apr 2013 17:13:59 +0000 Subject: drivers/crypto/nx: Fixes for multiple races and issues Fixes a race on driver init with registering algorithms where the driver status flag wasn't being set before self testing started. Added the cra_alignmask field for CBC and ECB modes. Fixed a bug in GCM where AES block size was being used instead of authsize. Removed use of blkcipher_walk routines for scatterlist processing. Corner cases in the code prevent us from processing an entire scatterlist at a time and walking the buffers in block sized chunks turns out to be unecessary anyway. Fixed off-by-one error in saving off extra data in the sha code. Fixed accounting error for number of bytes processed in the sha code. Signed-off-by: Kent Yoder Signed-off-by: Benjamin Herrenschmidt --- drivers/crypto/nx/nx-aes-cbc.c | 1 + drivers/crypto/nx/nx-aes-ecb.c | 1 + drivers/crypto/nx/nx-aes-gcm.c | 2 +- drivers/crypto/nx/nx-sha256.c | 8 +++++--- drivers/crypto/nx/nx-sha512.c | 7 ++++--- drivers/crypto/nx/nx.c | 38 +++++++------------------------------- 6 files changed, 19 insertions(+), 38 deletions(-) diff --git a/drivers/crypto/nx/nx-aes-cbc.c b/drivers/crypto/nx/nx-aes-cbc.c index a76d4c4f29f5..35d483f8db66 100644 --- a/drivers/crypto/nx/nx-aes-cbc.c +++ b/drivers/crypto/nx/nx-aes-cbc.c @@ -126,6 +126,7 @@ struct crypto_alg nx_cbc_aes_alg = { .cra_blocksize = AES_BLOCK_SIZE, .cra_ctxsize = sizeof(struct nx_crypto_ctx), .cra_type = &crypto_blkcipher_type, + .cra_alignmask = 0xf, .cra_module = THIS_MODULE, .cra_init = nx_crypto_ctx_aes_cbc_init, .cra_exit = nx_crypto_ctx_exit, diff --git a/drivers/crypto/nx/nx-aes-ecb.c b/drivers/crypto/nx/nx-aes-ecb.c index ba5f1611336f..7bbc9a81da21 100644 --- a/drivers/crypto/nx/nx-aes-ecb.c +++ b/drivers/crypto/nx/nx-aes-ecb.c @@ -123,6 +123,7 @@ struct crypto_alg nx_ecb_aes_alg = { .cra_priority = 300, .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, .cra_blocksize = AES_BLOCK_SIZE, + .cra_alignmask = 0xf, .cra_ctxsize = sizeof(struct nx_crypto_ctx), .cra_type = &crypto_blkcipher_type, .cra_module = THIS_MODULE, diff --git a/drivers/crypto/nx/nx-aes-gcm.c b/drivers/crypto/nx/nx-aes-gcm.c index c8109edc5cfb..6cca6c392b00 100644 --- a/drivers/crypto/nx/nx-aes-gcm.c +++ b/drivers/crypto/nx/nx-aes-gcm.c @@ -219,7 +219,7 @@ static int gcm_aes_nx_crypt(struct aead_request *req, int enc) if (enc) NX_CPB_FDM(csbcpb) |= NX_FDM_ENDE_ENCRYPT; else - nbytes -= AES_BLOCK_SIZE; + nbytes -= crypto_aead_authsize(crypto_aead_reqtfm(req)); csbcpb->cpb.aes_gcm.bit_length_data = nbytes * 8; diff --git a/drivers/crypto/nx/nx-sha256.c b/drivers/crypto/nx/nx-sha256.c index 9767315f8c0b..67024f2f0b78 100644 --- a/drivers/crypto/nx/nx-sha256.c +++ b/drivers/crypto/nx/nx-sha256.c @@ -69,7 +69,7 @@ static int nx_sha256_update(struct shash_desc *desc, const u8 *data, * 1: <= SHA256_BLOCK_SIZE: copy into state, return 0 * 2: > SHA256_BLOCK_SIZE: process X blocks, copy in leftover */ - if (len + sctx->count <= SHA256_BLOCK_SIZE) { + if (len + sctx->count < SHA256_BLOCK_SIZE) { memcpy(sctx->buf + sctx->count, data, len); sctx->count += len; goto out; @@ -110,7 +110,8 @@ static int nx_sha256_update(struct shash_desc *desc, const u8 *data, atomic_inc(&(nx_ctx->stats->sha256_ops)); /* copy the leftover back into the state struct */ - memcpy(sctx->buf, data + len - leftover, leftover); + if (leftover) + memcpy(sctx->buf, data + len - leftover, leftover); sctx->count = leftover; csbcpb->cpb.sha256.message_bit_length += (u64) @@ -130,6 +131,7 @@ static int nx_sha256_final(struct shash_desc *desc, u8 *out) struct nx_sg *in_sg, *out_sg; int rc; + if (NX_CPB_FDM(csbcpb) & NX_FDM_CONTINUATION) { /* we've hit the nx chip previously, now we're finalizing, * so copy over the partial digest */ @@ -162,7 +164,7 @@ static int nx_sha256_final(struct shash_desc *desc, u8 *out) atomic_inc(&(nx_ctx->stats->sha256_ops)); - atomic64_add(csbcpb->cpb.sha256.message_bit_length, + atomic64_add(csbcpb->cpb.sha256.message_bit_length / 8, &(nx_ctx->stats->sha256_bytes)); memcpy(out, csbcpb->cpb.sha256.message_digest, SHA256_DIGEST_SIZE); out: diff --git a/drivers/crypto/nx/nx-sha512.c b/drivers/crypto/nx/nx-sha512.c index 3177b8c3d5f1..08eee1122349 100644 --- a/drivers/crypto/nx/nx-sha512.c +++ b/drivers/crypto/nx/nx-sha512.c @@ -69,7 +69,7 @@ static int nx_sha512_update(struct shash_desc *desc, const u8 *data, * 1: <= SHA512_BLOCK_SIZE: copy into state, return 0 * 2: > SHA512_BLOCK_SIZE: process X blocks, copy in leftover */ - if ((u64)len + sctx->count[0] <= SHA512_BLOCK_SIZE) { + if ((u64)len + sctx->count[0] < SHA512_BLOCK_SIZE) { memcpy(sctx->buf + sctx->count[0], data, len); sctx->count[0] += len; goto out; @@ -110,7 +110,8 @@ static int nx_sha512_update(struct shash_desc *desc, const u8 *data, atomic_inc(&(nx_ctx->stats->sha512_ops)); /* copy the leftover back into the state struct */ - memcpy(sctx->buf, data + len - leftover, leftover); + if (leftover) + memcpy(sctx->buf, data + len - leftover, leftover); sctx->count[0] = leftover; spbc_bits = csbcpb->cpb.sha512.spbc * 8; @@ -168,7 +169,7 @@ static int nx_sha512_final(struct shash_desc *desc, u8 *out) goto out; atomic_inc(&(nx_ctx->stats->sha512_ops)); - atomic64_add(csbcpb->cpb.sha512.message_bit_length_lo, + atomic64_add(csbcpb->cpb.sha512.message_bit_length_lo / 8, &(nx_ctx->stats->sha512_bytes)); memcpy(out, csbcpb->cpb.sha512.message_digest, SHA512_DIGEST_SIZE); diff --git a/drivers/crypto/nx/nx.c b/drivers/crypto/nx/nx.c index c767f232e693..bbdab6e5ccf0 100644 --- a/drivers/crypto/nx/nx.c +++ b/drivers/crypto/nx/nx.c @@ -211,44 +211,20 @@ int nx_build_sg_lists(struct nx_crypto_ctx *nx_ctx, { struct nx_sg *nx_insg = nx_ctx->in_sg; struct nx_sg *nx_outsg = nx_ctx->out_sg; - struct blkcipher_walk walk; - int rc; - - blkcipher_walk_init(&walk, dst, src, nbytes); - rc = blkcipher_walk_virt_block(desc, &walk, AES_BLOCK_SIZE); - if (rc) - goto out; if (iv) - memcpy(iv, walk.iv, AES_BLOCK_SIZE); + memcpy(iv, desc->info, AES_BLOCK_SIZE); - while (walk.nbytes) { - nx_insg = nx_build_sg_list(nx_insg, walk.src.virt.addr, - walk.nbytes, nx_ctx->ap->sglen); - nx_outsg = nx_build_sg_list(nx_outsg, walk.dst.virt.addr, - walk.nbytes, nx_ctx->ap->sglen); - - rc = blkcipher_walk_done(desc, &walk, 0); - if (rc) - break; - } - - if (walk.nbytes) { - nx_insg = nx_build_sg_list(nx_insg, walk.src.virt.addr, - walk.nbytes, nx_ctx->ap->sglen); - nx_outsg = nx_build_sg_list(nx_outsg, walk.dst.virt.addr, - walk.nbytes, nx_ctx->ap->sglen); - - rc = 0; - } + nx_insg = nx_walk_and_build(nx_insg, nx_ctx->ap->sglen, src, 0, nbytes); + nx_outsg = nx_walk_and_build(nx_outsg, nx_ctx->ap->sglen, dst, 0, nbytes); /* these lengths should be negative, which will indicate to phyp that * the input and output parameters are scatterlists, not linear * buffers */ nx_ctx->op.inlen = (nx_ctx->in_sg - nx_insg) * sizeof(struct nx_sg); nx_ctx->op.outlen = (nx_ctx->out_sg - nx_outsg) * sizeof(struct nx_sg); -out: - return rc; + + return 0; } /** @@ -454,6 +430,8 @@ static int nx_register_algs(void) if (rc) goto out; + nx_driver.of.status = NX_OKAY; + rc = crypto_register_alg(&nx_ecb_aes_alg); if (rc) goto out; @@ -498,8 +476,6 @@ static int nx_register_algs(void) if (rc) goto out_unreg_s512; - nx_driver.of.status = NX_OKAY; - goto out; out_unreg_s512: -- cgit v1.2.3 From 8fc1f5d7eff9a4ed0cdb7215e7ca4b82b931d6d7 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 20 May 2013 17:23:22 +0000 Subject: powerpc: Fix TLB cleanup at boot on POWER8 The TLB has 512 congruence classes (2048 entries 4 way set associative) while P7 had 128 Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cpu_setup_power.S | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S index a283b6442b26..18b5b9cf8e37 100644 --- a/arch/powerpc/kernel/cpu_setup_power.S +++ b/arch/powerpc/kernel/cpu_setup_power.S @@ -135,8 +135,12 @@ __init_HFSCR: blr __init_TLB: - /* Clear the TLB */ - li r6,128 + /* + * Clear the TLB using the "IS 3" form of tlbiel instruction + * (invalidate by congruence class). P7 has 128 CCs, P8 has 512 + * so we just always do 512 + */ + li r6,512 mtctr r6 li r7,0xc00 /* IS field = 0b11 */ ptesync -- cgit v1.2.3 From bee7dd9c5fd5ab944e2e0ef3b92905fcbc993768 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 20 May 2013 17:24:39 +0000 Subject: powerpc/pci: Fix bogus message at boot about empty memory resources The message is only meant to be displayed if resource 0 is empty, but was displayed if any is. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/pci-common.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 6053f037ef0a..e9acf50dd5b2 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1520,9 +1520,10 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose, for (i = 0; i < 3; ++i) { res = &hose->mem_resources[i]; if (!res->flags) { - printk(KERN_ERR "PCI: Memory resource 0 not set for " - "host bridge %s (domain %d)\n", - hose->dn->full_name, hose->global_number); + if (i == 0) + printk(KERN_ERR "PCI: Memory resource 0 not set for " + "host bridge %s (domain %d)\n", + hose->dn->full_name, hose->global_number); continue; } offset = hose->mem_offset[i]; -- cgit v1.2.3 From 605e44d6e6f9b0c9ca8842dc0eb3ad032a463bdb Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 20 May 2013 17:25:15 +0000 Subject: powerpc/powernv: Fix condition for when to invalidate the TCE cache We use two flags, one to indicate an invalidation is needed after creating a new entry and one to indicate an invalidation is needed after removing an entry. However we were testing the wrong flag in the remove case. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/powernv/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 163bd7422f1c..098d3573315c 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -367,7 +367,7 @@ static void pnv_tce_free(struct iommu_table *tbl, long index, long npages) while (npages--) *(tcep++) = 0; - if (tbl->it_type & TCE_PCI_SWINV_CREATE) + if (tbl->it_type & TCE_PCI_SWINV_FREE) pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1); } -- cgit v1.2.3 From 59affcd3e460b97492bc1aa2b843bafe7c54f596 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 21 May 2013 16:31:12 +0000 Subject: powerpc: Context switch more PMU related SPRs In commit 9353374 "Context switch the new EBB SPRs" we added support for context switching some new EBB SPRs. However despite four of us signing off on that patch we missed some. To be fair these are not actually new SPRs, but they are now potentially user accessible so need to be context switched. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/processor.h | 6 ++++++ arch/powerpc/kernel/asm-offsets.c | 6 ++++++ arch/powerpc/kernel/entry_64.S | 28 ++++++++++++++++++++++++++++ 3 files changed, 40 insertions(+) diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index d7e67ca8b4a6..594db6bc093c 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -284,6 +284,12 @@ struct thread_struct { unsigned long ebbrr; unsigned long ebbhr; unsigned long bescr; + unsigned long siar; + unsigned long sdar; + unsigned long sier; + unsigned long mmcr0; + unsigned long mmcr2; + unsigned long mmcra; #endif }; diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index b51a97cfedf8..6f16ffafa6f0 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -127,6 +127,12 @@ int main(void) DEFINE(THREAD_BESCR, offsetof(struct thread_struct, bescr)); DEFINE(THREAD_EBBHR, offsetof(struct thread_struct, ebbhr)); DEFINE(THREAD_EBBRR, offsetof(struct thread_struct, ebbrr)); + DEFINE(THREAD_SIAR, offsetof(struct thread_struct, siar)); + DEFINE(THREAD_SDAR, offsetof(struct thread_struct, sdar)); + DEFINE(THREAD_SIER, offsetof(struct thread_struct, sier)); + DEFINE(THREAD_MMCR0, offsetof(struct thread_struct, mmcr0)); + DEFINE(THREAD_MMCR2, offsetof(struct thread_struct, mmcr2)); + DEFINE(THREAD_MMCRA, offsetof(struct thread_struct, mmcra)); #endif #ifdef CONFIG_PPC_TRANSACTIONAL_MEM DEFINE(PACATMSCRATCH, offsetof(struct paca_struct, tm_scratch)); diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 51cfb8fc301f..0e9095e47b5b 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -465,6 +465,20 @@ BEGIN_FTR_SECTION std r0, THREAD_EBBHR(r3) mfspr r0, SPRN_EBBRR std r0, THREAD_EBBRR(r3) + + /* PMU registers made user read/(write) by EBB */ + mfspr r0, SPRN_SIAR + std r0, THREAD_SIAR(r3) + mfspr r0, SPRN_SDAR + std r0, THREAD_SDAR(r3) + mfspr r0, SPRN_SIER + std r0, THREAD_SIER(r3) + mfspr r0, SPRN_MMCR0 + std r0, THREAD_MMCR0(r3) + mfspr r0, SPRN_MMCR2 + std r0, THREAD_MMCR2(r3) + mfspr r0, SPRN_MMCRA + std r0, THREAD_MMCRA(r3) END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) #endif @@ -560,6 +574,20 @@ BEGIN_FTR_SECTION ld r0, THREAD_EBBRR(r4) mtspr SPRN_EBBRR, r0 + /* PMU registers made user read/(write) by EBB */ + ld r0, THREAD_SIAR(r4) + mtspr SPRN_SIAR, r0 + ld r0, THREAD_SDAR(r4) + mtspr SPRN_SDAR, r0 + ld r0, THREAD_SIER(r4) + mtspr SPRN_SIER, r0 + ld r0, THREAD_MMCR0(r4) + mtspr SPRN_MMCR0, r0 + ld r0, THREAD_MMCR2(r4) + mtspr SPRN_MMCR2, r0 + ld r0, THREAD_MMCRA(r4) + mtspr SPRN_MMCRA, r0 + ld r0,THREAD_TAR(r4) mtspr SPRN_TAR,r0 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) -- cgit v1.2.3 From b72c1f651491e4cd33ddec79c504a49071a512f0 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 21 May 2013 22:58:21 +0000 Subject: powerpc: Make radeon 32-bit MSI quirk work on powernv This moves the quirk itself to pci_64.c as to get built on all ppc64 platforms (the only ones with a pci_dn), factors the two implementations of get_pdn() into a single pci_get_dn() and use the quirk to do 32-bit MSIs on IODA based powernv platforms. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pci-bridge.h | 2 ++ arch/powerpc/kernel/pci_64.c | 10 +++++++++ arch/powerpc/kernel/pci_dn.c | 8 +++++++ arch/powerpc/platforms/powernv/pci-ioda.c | 27 ++++++++++-------------- arch/powerpc/platforms/powernv/pci.c | 4 ++++ arch/powerpc/platforms/pseries/msi.c | 35 +++---------------------------- 6 files changed, 38 insertions(+), 48 deletions(-) diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 8b11b5bd9938..2c1d8cb9b265 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -174,6 +174,8 @@ struct pci_dn { /* Get the pointer to a device_node's pci_dn */ #define PCI_DN(dn) ((struct pci_dn *) (dn)->data) +extern struct pci_dn *pci_get_pdn(struct pci_dev *pdev); + extern void * update_dn_pci_info(struct device_node *dn, void *data); static inline int pci_device_from_OF_node(struct device_node *np, diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 873050d26840..2e8629654ca8 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -266,3 +266,13 @@ int pcibus_to_node(struct pci_bus *bus) } EXPORT_SYMBOL(pcibus_to_node); #endif + +static void quirk_radeon_32bit_msi(struct pci_dev *dev) +{ + struct pci_dn *pdn = pci_get_pdn(dev); + + if (pdn) + pdn->force_32bit_msi = 1; +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x68f2, quirk_radeon_32bit_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0xaa68, quirk_radeon_32bit_msi); diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c index e7af165f8b9d..df038442548a 100644 --- a/arch/powerpc/kernel/pci_dn.c +++ b/arch/powerpc/kernel/pci_dn.c @@ -32,6 +32,14 @@ #include #include +struct pci_dn *pci_get_pdn(struct pci_dev *pdev) +{ + struct device_node *dn = pci_device_to_OF_node(pdev); + if (!dn) + return NULL; + return PCI_DN(dn); +} + /* * Traverse_func that inits the PCI fields of the device node. * NOTE: this *must* be done before read/write config to the device. diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 3937aaae5bc4..9c9d15e4cdf2 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -68,16 +68,6 @@ define_pe_printk_level(pe_err, KERN_ERR); define_pe_printk_level(pe_warn, KERN_WARNING); define_pe_printk_level(pe_info, KERN_INFO); -static struct pci_dn *pnv_ioda_get_pdn(struct pci_dev *dev) -{ - struct device_node *np; - - np = pci_device_to_OF_node(dev); - if (!np) - return NULL; - return PCI_DN(np); -} - static int pnv_ioda_alloc_pe(struct pnv_phb *phb) { unsigned long pe; @@ -110,7 +100,7 @@ static struct pnv_ioda_pe *pnv_ioda_get_pe(struct pci_dev *dev) { struct pci_controller *hose = pci_bus_to_host(dev->bus); struct pnv_phb *phb = hose->private_data; - struct pci_dn *pdn = pnv_ioda_get_pdn(dev); + struct pci_dn *pdn = pci_get_pdn(dev); if (!pdn) return NULL; @@ -173,7 +163,7 @@ static int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe) /* Add to all parents PELT-V */ while (parent) { - struct pci_dn *pdn = pnv_ioda_get_pdn(parent); + struct pci_dn *pdn = pci_get_pdn(parent); if (pdn && pdn->pe_number != IODA_INVALID_PE) { rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number, pe->pe_number, OPAL_ADD_PE_TO_DOMAIN); @@ -252,7 +242,7 @@ static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev) { struct pci_controller *hose = pci_bus_to_host(dev->bus); struct pnv_phb *phb = hose->private_data; - struct pci_dn *pdn = pnv_ioda_get_pdn(dev); + struct pci_dn *pdn = pci_get_pdn(dev); struct pnv_ioda_pe *pe; int pe_num; @@ -323,7 +313,7 @@ static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe) struct pci_dev *dev; list_for_each_entry(dev, &bus->devices, bus_list) { - struct pci_dn *pdn = pnv_ioda_get_pdn(dev); + struct pci_dn *pdn = pci_get_pdn(dev); if (pdn == NULL) { pr_warn("%s: No device node associated with device !\n", @@ -436,7 +426,7 @@ static void pnv_pci_ioda_setup_PEs(void) static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev) { - struct pci_dn *pdn = pnv_ioda_get_pdn(pdev); + struct pci_dn *pdn = pci_get_pdn(pdev); struct pnv_ioda_pe *pe; /* @@ -768,6 +758,7 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev, unsigned int is_64, struct msi_msg *msg) { struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev); + struct pci_dn *pdn = pci_get_pdn(dev); struct irq_data *idata; struct irq_chip *ichip; unsigned int xive_num = hwirq - phb->msi_base; @@ -783,6 +774,10 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev, if (pe->mve_number < 0) return -ENXIO; + /* Force 32-bit MSI on some broken devices */ + if (pdn && pdn->force_32bit_msi) + is_64 = 0; + /* Assign XIVE to PE */ rc = opal_pci_set_xive_pe(phb->opal_id, pe->pe_number, xive_num); if (rc) { @@ -1035,7 +1030,7 @@ static int pnv_pci_enable_device_hook(struct pci_dev *dev) if (!phb->initialized) return 0; - pdn = pnv_ioda_get_pdn(dev); + pdn = pci_get_pdn(dev); if (!pdn || pdn->pe_number == IODA_INVALID_PE) return -EINVAL; diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 098d3573315c..277343cc6a3d 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -47,6 +47,10 @@ static int pnv_msi_check_device(struct pci_dev* pdev, int nvec, int type) { struct pci_controller *hose = pci_bus_to_host(pdev->bus); struct pnv_phb *phb = hose->private_data; + struct pci_dn *pdn = pci_get_pdn(pdev); + + if (pdn && pdn->force_32bit_msi && !phb->msi32_support) + return -ENODEV; return (phb && phb->msi_bmp.bitmap) ? 0 : -ENODEV; } diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index 420524e6f8c9..d34f4ffdb796 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -26,26 +26,6 @@ static int query_token, change_token; #define RTAS_CHANGE_MSIX_FN 4 #define RTAS_CHANGE_32MSI_FN 5 -static struct pci_dn *get_pdn(struct pci_dev *pdev) -{ - struct device_node *dn; - struct pci_dn *pdn; - - dn = pci_device_to_OF_node(pdev); - if (!dn) { - dev_dbg(&pdev->dev, "rtas_msi: No OF device node\n"); - return NULL; - } - - pdn = PCI_DN(dn); - if (!pdn) { - dev_dbg(&pdev->dev, "rtas_msi: No PCI DN\n"); - return NULL; - } - - return pdn; -} - /* RTAS Helpers */ static int rtas_change_msi(struct pci_dn *pdn, u32 func, u32 num_irqs) @@ -91,7 +71,7 @@ static void rtas_disable_msi(struct pci_dev *pdev) { struct pci_dn *pdn; - pdn = get_pdn(pdev); + pdn = pci_get_pdn(pdev); if (!pdn) return; @@ -152,7 +132,7 @@ static int check_req(struct pci_dev *pdev, int nvec, char *prop_name) struct pci_dn *pdn; const u32 *req_msi; - pdn = get_pdn(pdev); + pdn = pci_get_pdn(pdev); if (!pdn) return -ENODEV; @@ -402,7 +382,7 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type) struct msi_msg msg; int nvec = nvec_in; - pdn = get_pdn(pdev); + pdn = pci_get_pdn(pdev); if (!pdn) return -ENODEV; @@ -518,12 +498,3 @@ static int rtas_msi_init(void) } arch_initcall(rtas_msi_init); -static void quirk_radeon(struct pci_dev *dev) -{ - struct pci_dn *pdn = get_pdn(dev); - - if (pdn) - pdn->force_32bit_msi = 1; -} -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x68f2, quirk_radeon); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0xaa68, quirk_radeon); -- cgit v1.2.3 From 83920c498ebb51cbd62f26f72e87c04a2a46dec9 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 21 May 2013 23:00:22 +0000 Subject: powerpc/powernv: Build a zImage.epapr The zImage.epapr wrapper allows to use zImages when booting via a flat device-tree which can be used on powernv. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/powernv/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig index d3e840d643af..c24684c818ab 100644 --- a/arch/powerpc/platforms/powernv/Kconfig +++ b/arch/powerpc/platforms/powernv/Kconfig @@ -6,6 +6,7 @@ config PPC_POWERNV select PPC_ICP_NATIVE select PPC_P7_NAP select PPC_PCI_CHOICE if EMBEDDED + select EPAPR_BOOT default y config POWERNV_MSI -- cgit v1.2.3 From f1dd153121dcb872ae6cba8d52bec97519eb7d97 Mon Sep 17 00:00:00 2001 From: Brian King Date: Wed, 22 May 2013 11:07:46 +0000 Subject: powerpc/pseries: Make 32-bit MSI quirk work on systems lacking firmware support Recent commit e61133dda480062d221f09e4fc18f66763f8ecd0 added support for a new firmware feature to force an adapter to use 32 bit MSIs. However, this firmware is not available for all systems. The hack below allows devices needing 32 bit MSIs to work on these systems as well. It is careful to only enable this on Gen2 slots, which should limit this to configurations where this hack is needed and tested to work. [Small change to factor out the hack into a separate function -- BenH] Signed-off-by: Brian King Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/msi.c | 40 +++++++++++++++++++++++++++++++++--- 1 file changed, 37 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index d34f4ffdb796..6d2f0abce6fa 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -374,6 +374,23 @@ static int check_msix_entries(struct pci_dev *pdev) return 0; } +static void rtas_hack_32bit_msi_gen2(struct pci_dev *pdev) +{ + u32 addr_hi, addr_lo; + + /* + * We should only get in here for IODA1 configs. This is based on the + * fact that we using RTAS for MSIs, we don't have the 32 bit MSI RTAS + * support, and we are in a PCIe Gen2 slot. + */ + dev_info(&pdev->dev, + "rtas_msi: No 32 bit MSI firmware support, forcing 32 bit MSI\n"); + pci_read_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI, &addr_hi); + addr_lo = 0xffff0000 | ((addr_hi >> (48 - 32)) << 4); + pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_LO, addr_lo); + pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI, 0); +} + static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type) { struct pci_dn *pdn; @@ -381,6 +398,7 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type) struct msi_desc *entry; struct msi_msg msg; int nvec = nvec_in; + int use_32bit_msi_hack = 0; pdn = pci_get_pdn(pdev); if (!pdn) @@ -408,15 +426,31 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type) */ again: if (type == PCI_CAP_ID_MSI) { - if (pdn->force_32bit_msi) + if (pdn->force_32bit_msi) { rc = rtas_change_msi(pdn, RTAS_CHANGE_32MSI_FN, nvec); - else + if (rc < 0) { + /* + * We only want to run the 32 bit MSI hack below if + * the max bus speed is Gen2 speed + */ + if (pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) + return rc; + + use_32bit_msi_hack = 1; + } + } else + rc = -1; + + if (rc < 0) rc = rtas_change_msi(pdn, RTAS_CHANGE_MSI_FN, nvec); - if (rc < 0 && !pdn->force_32bit_msi) { + if (rc < 0) { pr_debug("rtas_msi: trying the old firmware call.\n"); rc = rtas_change_msi(pdn, RTAS_CHANGE_FN, nvec); } + + if (use_32bit_msi_hack && rc > 0) + rtas_hack_32bit_msi_gen2(pdev); } else rc = rtas_change_msi(pdn, RTAS_CHANGE_MSIX_FN, nvec); -- cgit v1.2.3 From 029efddab6967f755c21f47b0bc456f1a546805f Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 24 May 2013 00:59:16 +0200 Subject: ARM: at91: at91sam9n12: move external irq declatation to DT Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9n12.dtsi | 1 + arch/arm/mach-at91/at91sam9n12.c | 6 ------ 2 files changed, 1 insertion(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 3de8e6dfbcb1..8d25f889928e 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -57,6 +57,7 @@ compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; }; ramc0: ramc@ffffe800 { diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 13cdbcd48f51..c7d670d11802 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -223,13 +223,7 @@ static void __init at91sam9n12_map_io(void) at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE); } -void __init at91sam9n12_initialize(void) -{ - at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0); -} - AT91_SOC_START(at91sam9n12) .map_io = at91sam9n12_map_io, .register_clocks = at91sam9n12_register_clocks, - .init = at91sam9n12_initialize, AT91_SOC_END -- cgit v1.2.3 From f6d35d67d0a5c159f767a20f4fcc1d295a7314b1 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Thu, 23 May 2013 18:01:21 +0200 Subject: ARM: at91/dt: fix macb pinctrl_macb_rmii_mii_alt definition The PA24 pin is wrongly assigned to peripheral B. In the current config there is 2 ETX3 pins (PA11 and PA24) and no ETXER pin (PA22). Signed-off-by: Boris BREZILLON Signed-off-by: Nicolas Ferre Cc: stable # 3.8+ --- arch/arm/boot/dts/at91sam9260.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 70b5ccbac234..84c4bef2d726 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -264,7 +264,7 @@ atmel,pins = <0 10 0x2 0x0 /* PA10 periph B */ 0 11 0x2 0x0 /* PA11 periph B */ - 0 24 0x2 0x0 /* PA24 periph B */ + 0 22 0x2 0x0 /* PA22 periph B */ 0 25 0x2 0x0 /* PA25 periph B */ 0 26 0x2 0x0 /* PA26 periph B */ 0 27 0x2 0x0 /* PA27 periph B */ -- cgit v1.2.3 From 144ea15e4fefbee14a7dcb05c7cd0822fda3ebf6 Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Thu, 23 May 2013 10:18:48 +0000 Subject: ARM: at91/sama5: fix incorrect PMC pcr div definition Signed-off-by: Josh Wu Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Ludovic Desroches Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/include/mach/at91_pmc.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 31df12029c4e..2bd7f51b0b82 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -179,9 +179,9 @@ extern void __iomem *at91_pmc_base; #define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */ #define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */ #define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */ -#define AT91_PMC_PCR_DIV2 0x2 /* Peripheral clock is MCK/2 */ -#define AT91_PMC_PCR_DIV4 0x4 /* Peripheral clock is MCK/4 */ -#define AT91_PMC_PCR_DIV8 0x8 /* Peripheral clock is MCK/8 */ +#define AT91_PMC_PCR_DIV2 0x1 /* Peripheral clock is MCK/2 */ +#define AT91_PMC_PCR_DIV4 0x2 /* Peripheral clock is MCK/4 */ +#define AT91_PMC_PCR_DIV8 0x3 /* Peripheral clock is MCK/8 */ #define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ #endif -- cgit v1.2.3 From 37f715774e2dd9ae521334dbbc3af63becd47adb Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Fri, 10 May 2013 11:59:18 -0400 Subject: GFS2: two minor quota fixups This patch fixes two regression problems that Abhi found in the GFS2 quota code. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/quota.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c index c7c840e916f8..c253b13722e8 100644 --- a/fs/gfs2/quota.c +++ b/fs/gfs2/quota.c @@ -121,7 +121,7 @@ static u64 qd2index(struct gfs2_quota_data *qd) { struct kqid qid = qd->qd_id; return (2 * (u64)from_kqid(&init_user_ns, qid)) + - (qid.type == USRQUOTA) ? 0 : 1; + ((qid.type == USRQUOTA) ? 0 : 1); } static u64 qd2offset(struct gfs2_quota_data *qd) @@ -721,7 +721,7 @@ get_a_page: goto unlock_out; } - gfs2_trans_add_meta(ip->i_gl, bh); + gfs2_trans_add_data(ip->i_gl, bh); kaddr = kmap_atomic(page); if (offset + sizeof(struct gfs2_quota) > PAGE_CACHE_SIZE) -- cgit v1.2.3 From af21ca8ed50f01c5278c5ded6dad6f05e8a5d2e4 Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Tue, 14 May 2013 13:04:29 -0400 Subject: GFS2: Use single-block reservations for directories This patch changes the multi-block allocation code, such that directory inodes only get a single block reserved in the bitmap. That way, the bitmaps are more tightly packed together, and there are fewer spans of free blocks for in-use block reservations. This means it takes less time to find a free span of blocks in the bitmap, which speeds things up. This increases the performance of some workloads by almost 2X. In Nate's mockup.py script (which does (1) create dir, (2) create dir in dir, (3) create file in that dir) the test executes in 23 steps rather than 43 steps, a 47% performance improvement. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/rgrp.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 0c5a575b513e..5232525934ae 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -1401,9 +1401,14 @@ static void rg_mblk_search(struct gfs2_rgrpd *rgd, struct gfs2_inode *ip, u32 extlen; u32 free_blocks = rgd->rd_free_clone - rgd->rd_reserved; int ret; + struct inode *inode = &ip->i_inode; - extlen = max_t(u32, atomic_read(&rs->rs_sizehint), requested); - extlen = clamp(extlen, RGRP_RSRV_MINBLKS, free_blocks); + if (S_ISDIR(inode->i_mode)) + extlen = 1; + else { + extlen = max_t(u32, atomic_read(&rs->rs_sizehint), requested); + extlen = clamp(extlen, RGRP_RSRV_MINBLKS, free_blocks); + } if ((rgd->rd_free_clone < rgd->rd_reserved) || (free_blocks < extlen)) return; -- cgit v1.2.3 From 75f96ce6e754eee30d9ec788ad91c6ec21d0a46b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 14 May 2013 10:02:48 -0700 Subject: GFS2: fix DLM depends to fix build errors Fix build errors by correcting DLM dependencies in GFS2. Build errors happen when CONFIG_GFS2_FS_LOCKING_DLM=y and CONFIG_DLM=m: fs/built-in.o: In function `gfs2_lock': file.c:(.text+0xc7abd): undefined reference to `dlm_posix_get' file.c:(.text+0xc7ad0): undefined reference to `dlm_posix_unlock' file.c:(.text+0xc7ad9): undefined reference to `dlm_posix_lock' fs/built-in.o: In function `gdlm_unmount': lock_dlm.c:(.text+0xd6e5b): undefined reference to `dlm_release_lockspace' fs/built-in.o: In function `sync_unlock': lock_dlm.c:(.text+0xd6e9e): undefined reference to `dlm_unlock' fs/built-in.o: In function `sync_lock': lock_dlm.c:(.text+0xd6fb6): undefined reference to `dlm_lock' fs/built-in.o: In function `gdlm_put_lock': lock_dlm.c:(.text+0xd7238): undefined reference to `dlm_unlock' fs/built-in.o: In function `gdlm_mount': lock_dlm.c:(.text+0xd753e): undefined reference to `dlm_new_lockspace' lock_dlm.c:(.text+0xd79d3): undefined reference to `dlm_release_lockspace' fs/built-in.o: In function `gdlm_lock': lock_dlm.c:(.text+0xd8179): undefined reference to `dlm_lock' fs/built-in.o: In function `gdlm_cancel': lock_dlm.c:(.text+0xd6b22): undefined reference to `dlm_unlock' Signed-off-by: Randy Dunlap Signed-off-by: Steven Whitehouse --- fs/gfs2/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/gfs2/Kconfig b/fs/gfs2/Kconfig index eb08c9e43c2a..5a376ab81feb 100644 --- a/fs/gfs2/Kconfig +++ b/fs/gfs2/Kconfig @@ -26,7 +26,7 @@ config GFS2_FS config GFS2_FS_LOCKING_DLM bool "GFS2 DLM locking" depends on (GFS2_FS!=n) && NET && INET && (IPV6 || IPV6=n) && \ - HOTPLUG && DLM && CONFIGFS_FS && SYSFS + HOTPLUG && CONFIGFS_FS && SYSFS && (DLM=y || DLM=GFS2_FS) help Multiple node locking module for GFS2 -- cgit v1.2.3 From e97e548ba8baffe051146d1f5e897dec48da20e0 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Tue, 21 May 2013 12:49:07 +0100 Subject: GFS2: Fix typo in gfs2_log_end_write loop There was a missing _all in this loop iterator Signed-off-by: Steven Whitehouse --- fs/gfs2/lops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c index c5fa758fd844..68b4c8f1fce8 100644 --- a/fs/gfs2/lops.c +++ b/fs/gfs2/lops.c @@ -212,7 +212,7 @@ static void gfs2_end_log_write(struct bio *bio, int error) fs_err(sdp, "Error %d writing to log\n", error); } - bio_for_each_segment(bvec, bio, i) { + bio_for_each_segment_all(bvec, bio, i) { page = bvec->bv_page; if (page_has_buffers(page)) gfs2_end_log_write_bh(sdp, bvec, error); -- cgit v1.2.3 From 70ef5578dd8011eeafa999a18194d9b548a4d889 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sun, 5 May 2013 22:08:22 +0000 Subject: MPILIB: disable usage of floating point registers on parisc The umul_ppmm() macro for parisc uses the xmpyu assembler statement which does calculation via a floating point register. But usage of floating point registers inside the Linux kernel are not allowed and gcc will stop compilation due to the -mdisable-fpregs compiler option. Fix this by disabling the umul_ppmm() and udiv_qrnnd() macros. The mpilib will then use the generic built-in implementations instead. Signed-off-by: Helge Deller --- lib/mpi/longlong.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/lib/mpi/longlong.h b/lib/mpi/longlong.h index 095ab157a521..d411355f238e 100644 --- a/lib/mpi/longlong.h +++ b/lib/mpi/longlong.h @@ -318,7 +318,8 @@ extern UDItype __udiv_qrnnd(); "rM" ((USItype)(bh)), \ "rM" ((USItype)(al)), \ "rM" ((USItype)(bl))) -#if defined(_PA_RISC1_1) +#if 0 && defined(_PA_RISC1_1) +/* xmpyu uses floating point register which is not allowed in Linux kernel. */ #define umul_ppmm(wh, wl, u, v) \ do { \ union {UDItype __ll; \ @@ -337,7 +338,7 @@ do { \ #define UMUL_TIME 40 #define UDIV_TIME 80 #endif -#ifndef LONGLONG_STANDALONE +#if 0 /* #ifndef LONGLONG_STANDALONE */ #define udiv_qrnnd(q, r, n1, n0, d) \ do { USItype __r; \ (q) = __udiv_qrnnd(&__r, (n1), (n0), (d)); \ -- cgit v1.2.3 From 949451b9b19da5e998778eb78929aafc73b5c227 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 16 May 2013 20:42:39 +0000 Subject: parisc: add rp5470 entry to machine database Signed-off-by: Helge Deller --- arch/parisc/kernel/hardware.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c index f7752f6af29e..9e2d2e408529 100644 --- a/arch/parisc/kernel/hardware.c +++ b/arch/parisc/kernel/hardware.c @@ -222,6 +222,7 @@ static struct hp_hardware hp_hardware_list[] = { {HPHW_NPROC,0x5DD,0x4,0x81,"Duet W2"}, {HPHW_NPROC,0x5DE,0x4,0x81,"Piccolo W+"}, {HPHW_NPROC,0x5DF,0x4,0x81,"Cantata W2"}, + {HPHW_NPROC,0x5DF,0x0,0x00,"Marcato W+? (rp5470)"}, {HPHW_NPROC,0x5E0,0x4,0x91,"Cantata DC- W2"}, {HPHW_NPROC,0x5E1,0x4,0x91,"Crescendo DC- W2"}, {HPHW_NPROC,0x5E2,0x4,0x91,"Crescendo 650 W2"}, -- cgit v1.2.3 From d845b5fb36edbd16563bde49ae1217b3f5132eec Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 16 May 2013 20:51:41 +0000 Subject: parisc: use PAGE_SHIFT instead of hardcoded value 12 in pacache.S additionally clean up some whitespaces & tabs. Signed-off-by: Helge Deller --- arch/parisc/kernel/pacache.S | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 5e1de6072be5..36d7f402e48e 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -605,14 +605,14 @@ ENTRY(copy_user_page_asm) convert_phys_for_tlb_insert20 %r26 /* convert phys addr to tlb insert format */ convert_phys_for_tlb_insert20 %r23 /* convert phys addr to tlb insert format */ depd %r24,63,22, %r28 /* Form aliased virtual address 'to' */ - depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ + depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ copy %r28, %r29 depdi 1, 41,1, %r29 /* Form aliased virtual address 'from' */ #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ extrw,u %r23, 24,25, %r23 /* convert phys addr to tlb insert format */ depw %r24, 31,22, %r28 /* Form aliased virtual address 'to' */ - depwi 0, 31,12, %r28 /* Clear any offset bits */ + depwi 0, 31,PAGE_SHIFT, %r28 /* Clear any offset bits */ copy %r28, %r29 depwi 1, 9,1, %r29 /* Form aliased virtual address 'from' */ #endif @@ -762,7 +762,7 @@ ENTRY(clear_user_page_asm) #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ - depwi 0, 31,12, %r28 /* Clear any offset bits */ + depwi 0, 31,PAGE_SHIFT, %r28 /* Clear any offset bits */ #endif /* Purge any old translation */ @@ -846,7 +846,7 @@ ENTRY(flush_dcache_page_asm) #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ - depwi 0, 31,12, %r28 /* Clear any offset bits */ + depwi 0, 31,PAGE_SHIFT, %r28 /* Clear any offset bits */ #endif /* Purge any old translation */ @@ -918,11 +918,11 @@ ENTRY(flush_icache_page_asm) #endif convert_phys_for_tlb_insert20 %r26 /* convert phys addr to tlb insert format */ depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */ - depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ + depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ - depwi 0, 31,12, %r28 /* Clear any offset bits */ + depwi 0, 31,PAGE_SHIFT, %r28 /* Clear any offset bits */ #endif /* Purge any old translation */ -- cgit v1.2.3 From fbb46caa1bd2d99079a24f8a6ae0b33655e42fae Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 16 May 2013 21:00:16 +0000 Subject: parisc: add additional parisc git tree to MAINTAINERS file Signed-off-by: Helge Deller --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index b645a3d5fd30..fd3a495a0005 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6084,6 +6084,7 @@ L: linux-parisc@vger.kernel.org W: http://www.parisc-linux.org/ Q: http://patchwork.kernel.org/project/linux-parisc/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git S: Maintained F: arch/parisc/ F: drivers/parisc/ -- cgit v1.2.3 From d0c3be806a3fe7f4abdb0f7e7287addb55e73f35 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 18 May 2013 19:35:44 +0000 Subject: parisc: show number of FPE and unaligned access handler calls in /proc/interrupts Show number of floating point assistant and unaligned access fixup handler in /proc/interrupts file. Signed-off-by: Helge Deller --- arch/parisc/include/asm/hardirq.h | 2 ++ arch/parisc/kernel/irq.c | 8 ++++++++ arch/parisc/kernel/traps.c | 1 + arch/parisc/kernel/unaligned.c | 3 +++ 4 files changed, 14 insertions(+) diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h index c19f7138ba48..4c6dd8da1e5d 100644 --- a/arch/parisc/include/asm/hardirq.h +++ b/arch/parisc/include/asm/hardirq.h @@ -28,6 +28,8 @@ typedef struct { unsigned int irq_resched_count; unsigned int irq_call_count; #endif + unsigned int irq_unaligned_count; + unsigned int irq_fpassist_count; unsigned int irq_tlb_count; } ____cacheline_aligned irq_cpustat_t; diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 55237a70e197..9c2d953f3de5 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -188,6 +188,14 @@ int arch_show_interrupts(struct seq_file *p, int prec) seq_printf(p, "%10u ", irq_stats(j)->irq_call_count); seq_puts(p, " Function call interrupts\n"); #endif + seq_printf(p, "%*s: ", prec, "UAH"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stats(j)->irq_unaligned_count); + seq_puts(p, " Unaligned access handler traps\n"); + seq_printf(p, "%*s: ", prec, "FPA"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stats(j)->irq_fpassist_count); + seq_puts(p, " Floating point assist traps\n"); seq_printf(p, "%*s: ", prec, "TLB"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_tlb_count); diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index fe41a98043bb..04e47c6a4562 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -646,6 +646,7 @@ void notrace handle_interruption(int code, struct pt_regs *regs) case 14: /* Assist Exception Trap, i.e. floating point exception. */ die_if_kernel("Floating point exception", regs, 0); /* quiet */ + __inc_irq_stat(irq_fpassist_count); handle_fpe(regs); return; diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c index 234e3682cf09..d7c0acb35ec2 100644 --- a/arch/parisc/kernel/unaligned.c +++ b/arch/parisc/kernel/unaligned.c @@ -27,6 +27,7 @@ #include #include #include +#include /* #define DEBUG_UNALIGNED 1 */ @@ -454,6 +455,8 @@ void handle_unaligned(struct pt_regs *regs) struct siginfo si; register int flop=0; /* true if this is a flop */ + __inc_irq_stat(irq_unaligned_count); + /* log a message with pacing */ if (user_mode(regs)) { if (current->thread.flags & PARISC_UAC_SIGBUS) { -- cgit v1.2.3 From b63a2bbc0b9b106a93e11952ab057e2408f2eb02 Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Mon, 20 May 2013 16:42:53 +0000 Subject: parisc: make interrupt and interruption stack allocation reentrant The get_stack_use_cr30 and get_stack_use_r30 macros allocate a stack frame for external interrupts and interruptions requiring a stack frame. They are currently not reentrant in that they save register context before the stack is set or adjusted. I have observed a number of system crashes where there was clear evidence of stack corruption during interrupt processing, and as a result register corruption. Some interruptions can still occur during interruption processing, however external interrupts are disabled and data TLB misses don't occur for absolute accesses. So, it's not entirely clear what triggers this issue. Also, if an interruption occurs when Q=0, it is generally not possible to recover as the shadowed registers are not copied. The attached patch reworks the get_stack_use_cr30 and get_stack_use_r30 macros to allocate stack before doing register saves. The new code is a couple of instructions shorter than the old implementation. Thus, it's an improvement even if it doesn't fully resolve the stack corruption issue. Based on limited testing, it improves SMP system stability. Signed-off-by: John David Anglin Signed-off-by: Helge Deller --- arch/parisc/include/asm/assembly.h | 1 - arch/parisc/kernel/entry.S | 19 ++++++++++--------- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h index 89fb40005e3f..0da848232344 100644 --- a/arch/parisc/include/asm/assembly.h +++ b/arch/parisc/include/asm/assembly.h @@ -438,7 +438,6 @@ SAVE_SP (%sr4, PT_SR4 (\regs)) SAVE_SP (%sr5, PT_SR5 (\regs)) SAVE_SP (%sr6, PT_SR6 (\regs)) - SAVE_SP (%sr7, PT_SR7 (\regs)) SAVE_CR (%cr17, PT_IASQ0(\regs)) mtctl %r0, %cr17 diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index ae27cb6ce19a..e8f07dd28401 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -65,15 +65,11 @@ rsm PSW_SM_I, %r0 /* barrier for "Relied upon Translation */ mtsp %r0, %sr4 mtsp %r0, %sr5 - mfsp %sr7, %r1 - or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */ - mtsp %r1, %sr3 + mtsp %r0, %sr6 tovirt_r1 %r29 load32 KERNEL_PSW, %r1 rsm PSW_SM_QUIET,%r0 /* second "heavy weight" ctl op */ - mtsp %r0, %sr6 - mtsp %r0, %sr7 mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ mtctl %r1, %ipsw @@ -119,17 +115,20 @@ /* we save the registers in the task struct */ + copy %r30, %r17 mfctl %cr30, %r1 + ldo THREAD_SZ_ALGN(%r1), %r30 + mtsp %r0,%sr7 + mtsp %r16,%sr3 tophys %r1,%r9 LDREG TI_TASK(%r9), %r1 /* thread_info -> task_struct */ tophys %r1,%r9 ldo TASK_REGS(%r9),%r9 - STREG %r30, PT_GR30(%r9) + STREG %r17,PT_GR30(%r9) STREG %r29,PT_GR29(%r9) STREG %r26,PT_GR26(%r9) + STREG %r16,PT_SR7(%r9) copy %r9,%r29 - mfctl %cr30, %r1 - ldo THREAD_SZ_ALGN(%r1), %r30 .endm .macro get_stack_use_r30 @@ -137,10 +136,12 @@ /* we put a struct pt_regs on the stack and save the registers there */ tophys %r30,%r9 - STREG %r30,PT_GR30(%r9) + copy %r30,%r1 ldo PT_SZ_ALGN(%r30),%r30 + STREG %r1,PT_GR30(%r9) STREG %r29,PT_GR29(%r9) STREG %r26,PT_GR26(%r9) + STREG %r16,PT_SR7(%r9) copy %r9,%r29 .endm -- cgit v1.2.3 From 2c2d32bed1a1bb6121494965b31badb280f04b0e Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Mon, 20 May 2013 20:56:45 +0000 Subject: parisc/superio: Use module_pci_driver to register driver Removing some boilerplate by using module_pci_driver instead of calling register and unregister in the otherwise empty init/exit functions. Signed-off-by: Peter Huewe Signed-off-by: Helge Deller --- drivers/parisc/superio.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c index ac6e8e7a02df..a042d065a0c7 100644 --- a/drivers/parisc/superio.c +++ b/drivers/parisc/superio.c @@ -494,15 +494,4 @@ static struct pci_driver superio_driver = { .probe = superio_probe, }; -static int __init superio_modinit(void) -{ - return pci_register_driver(&superio_driver); -} - -static void __exit superio_exit(void) -{ - pci_unregister_driver(&superio_driver); -} - -module_init(superio_modinit); -module_exit(superio_exit); +module_pci_driver(superio_driver); -- cgit v1.2.3 From 480d7467e4aaa3dc38088baf56bc3eb3599f5d26 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:08 +1000 Subject: xfs: fix sub-page blocksize data integrity writes FSX on 512 byte block size filesystems has been failing for some time with corrupted data. The fault dates back to the change in the writeback data integrity algorithm that uses a mark-and-sweep approach to avoid data writeback livelocks. Unfortunately, a side effect of this mark-and-sweep approach is that each page will only be written once for a data integrity sync, and there is a condition in writeback in XFS where a page may require two writeback attempts to be fully written. As a result of the high level change, we now only get a partial page writeback during the integrity sync because the first pass through writeback clears the mark left on the page index to tell writeback that the page needs writeback.... The cause is writing a partial page in the clustering code. This can happen when a mapping boundary falls in the middle of a page - we end up writing back the first part of the page that the mapping covers, but then never revisit the page to have the remainder mapped and written. The fix is simple - if the mapping boundary falls inside a page, then simple abort clustering without touching the page. This means that the next ->writepage entry that write_cache_pages() will make is the page we aborted on, and xfs_vm_writepage() will map all sections of the page correctly. This behaviour is also optimal for non-data integrity writes, as it results in contiguous sequential writeback of the file rather than missing small holes and having to write them a "random" writes in a future pass. With this fix, all the fsx tests in xfstests now pass on a 512 byte block size filesystem on a 4k page machine. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 49b137cbbcc836ef231866c137d24f42c42bb483) --- fs/xfs/xfs_aops.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c index 2b2691b73428..41a695048be7 100644 --- a/fs/xfs/xfs_aops.c +++ b/fs/xfs/xfs_aops.c @@ -725,6 +725,25 @@ xfs_convert_page( (xfs_off_t)(page->index + 1) << PAGE_CACHE_SHIFT, i_size_read(inode)); + /* + * If the current map does not span the entire page we are about to try + * to write, then give up. The only way we can write a page that spans + * multiple mappings in a single writeback iteration is via the + * xfs_vm_writepage() function. Data integrity writeback requires the + * entire page to be written in a single attempt, otherwise the part of + * the page we don't write here doesn't get written as part of the data + * integrity sync. + * + * For normal writeback, we also don't attempt to write partial pages + * here as it simply means that write_cache_pages() will see it under + * writeback and ignore the page until some point in the future, at + * which time this will be the only page in the file that needs + * writeback. Hence for more optimal IO patterns, we should always + * avoid partial page writeback due to multiple mappings on a page here. + */ + if (!xfs_imap_valid(inode, imap, end_offset)) + goto fail_unlock_page; + len = 1 << inode->i_blkbits; p_offset = min_t(unsigned long, end_offset & (PAGE_CACHE_SIZE - 1), PAGE_CACHE_SIZE); -- cgit v1.2.3 From 7031d0e1c46e2b1c869458233dd216cb72af41b2 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:09 +1000 Subject: xfs: fix rounding in xfs_free_file_space The offset passed into xfs_free_file_space() needs to be rounded down to a certain size, but the rounding mask is built by a 32 bit variable. Hence the mask will always mask off the upper 32 bits of the offset and lead to incorrect writeback and invalidation ranges. This is not actually exposed as a bug because we writeback and invalidate from the rounded offset to the end of the file, and hence the offset we are actually punching a hole out of will always be covered by the code. This needs fixing, however, if we ever want to use exact ranges for writeback/invalidation here... Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 28ca489c63e9aceed8801d2f82d731b3c9aa50f5) --- fs/xfs/xfs_vnodeops.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index 1501f4fa51a6..0176bb21f09a 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -1453,7 +1453,7 @@ xfs_free_file_space( xfs_mount_t *mp; int nimap; uint resblks; - uint rounding; + xfs_off_t rounding; int rt; xfs_fileoff_t startoffset_fsb; xfs_trans_t *tp; @@ -1482,7 +1482,7 @@ xfs_free_file_space( inode_dio_wait(VFS_I(ip)); } - rounding = max_t(uint, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE); + rounding = max_t(xfs_off_t, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE); ioffset = offset & ~(rounding - 1); error = -filemap_write_and_wait_range(VFS_I(ip)->i_mapping, ioffset, -1); -- cgit v1.2.3 From 509e708a8929c5b75a16c985c03db5329e09cad4 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:10 +1000 Subject: xfs: Don't reference the EFI after it is freed Checking the EFI for whether it is being released from recovery after we've already released the known active reference is a mistake worthy of a brown paper bag. Fix the (now) obvious use after free that it can cause. Reported-by: Dave Jones Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 52c24ad39ff02d7bd73c92eb0c926fb44984a41d) --- fs/xfs/xfs_extfree_item.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c index c0f375087efc..452920a3f03f 100644 --- a/fs/xfs/xfs_extfree_item.c +++ b/fs/xfs/xfs_extfree_item.c @@ -305,11 +305,12 @@ xfs_efi_release(xfs_efi_log_item_t *efip, { ASSERT(atomic_read(&efip->efi_next_extent) >= nextents); if (atomic_sub_and_test(nextents, &efip->efi_next_extent)) { - __xfs_efi_release(efip); - /* recovery needs us to drop the EFI reference, too */ if (test_bit(XFS_EFI_RECOVERED, &efip->efi_flags)) __xfs_efi_release(efip); + + __xfs_efi_release(efip); + /* efip may now have been freed, do not reference it again. */ } } -- cgit v1.2.3 From d96b51ec14650b490ab98e738bcc02309396e5bc Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 24 May 2013 21:27:35 +0000 Subject: parisc: fix irq stack on UP and SMP The logic to detect if the irq stack was already in use with raw_spin_trylock() is wrong, because it will generate a "trylock failure on UP" error message with CONFIG_SMP=n and CONFIG_DEBUG_SPINLOCK=y. arch_spin_trylock() can't be used either since in the CONFIG_SMP=n case no atomic protection is given and we are reentrant here. A mutex didn't worked either and brings more overhead by turning off interrupts. So, let's use the fastest path for parisc which is the ldcw instruction. Counting how often the irq stack was used is pretty useless, so just drop this piece of code. Signed-off-by: Helge Deller --- arch/parisc/include/asm/hardirq.h | 5 ----- arch/parisc/include/asm/processor.h | 21 ------------------- arch/parisc/kernel/irq.c | 41 +++++++++++++++++++++++-------------- 3 files changed, 26 insertions(+), 41 deletions(-) diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h index 4c6dd8da1e5d..241c34518465 100644 --- a/arch/parisc/include/asm/hardirq.h +++ b/arch/parisc/include/asm/hardirq.h @@ -17,13 +17,8 @@ typedef struct { unsigned int __softirq_pending; -#ifdef CONFIG_DEBUG_STACKOVERFLOW unsigned int kernel_stack_usage; -#ifdef CONFIG_IRQSTACKS unsigned int irq_stack_usage; - unsigned int irq_stack_counter; -#endif -#endif #ifdef CONFIG_SMP unsigned int irq_resched_count; unsigned int irq_call_count; diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h index cfbc43929cf6..cc2290a3cace 100644 --- a/arch/parisc/include/asm/processor.h +++ b/arch/parisc/include/asm/processor.h @@ -17,7 +17,6 @@ #include #include #include - #endif /* __ASSEMBLY__ */ /* @@ -58,26 +57,6 @@ #ifndef __ASSEMBLY__ -/* - * IRQ STACK - used for irq handler - */ -#ifdef __KERNEL__ - -#include - -#define IRQ_STACK_SIZE (4096 << 2) /* 16k irq stack size */ - -union irq_stack_union { - unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)]; - raw_spinlock_t lock; -}; - -DECLARE_PER_CPU(union irq_stack_union, irq_stack_union); - -void call_on_stack(unsigned long p1, void *func, unsigned long new_stack); - -#endif /* __KERNEL__ */ - /* * Data detected about CPUs at boot time which is the same for all CPU's. * HP boxes are SMP - ie identical processors. diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 9c2d953f3de5..2e6443b1e922 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -27,11 +27,11 @@ #include #include #include -#include #include #include #include +#include #undef PARISC_IRQ_CR16_COUNTS @@ -172,10 +172,6 @@ int arch_show_interrupts(struct seq_file *p, int prec) for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_stack_usage); seq_puts(p, " Interrupt stack usage\n"); - seq_printf(p, "%*s: ", prec, "ISC"); - for_each_online_cpu(j) - seq_printf(p, "%10u ", irq_stats(j)->irq_stack_counter); - seq_puts(p, " Interrupt stack usage counter\n"); # endif #endif #ifdef CONFIG_SMP @@ -384,6 +380,24 @@ static inline int eirr_to_irq(unsigned long eirr) return (BITS_PER_LONG - bit) + TIMER_IRQ; } +#ifdef CONFIG_IRQSTACKS +/* + * IRQ STACK - used for irq handler + */ +#define IRQ_STACK_SIZE (4096 << 2) /* 16k irq stack size */ + +union irq_stack_union { + unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)]; + volatile unsigned int slock[4]; + volatile unsigned int lock[1]; +}; + +DEFINE_PER_CPU(union irq_stack_union, irq_stack_union) = { + .slock = { 1,1,1,1 }, + }; +#endif + + int sysctl_panic_on_stackoverflow = 1; static inline void stack_overflow_check(struct pt_regs *regs) @@ -450,27 +464,26 @@ panic_check: } #ifdef CONFIG_IRQSTACKS -DEFINE_PER_CPU(union irq_stack_union, irq_stack_union) = { - .lock = __RAW_SPIN_LOCK_UNLOCKED((irq_stack_union).lock) - }; +/* in entry.S: */ +void call_on_stack(unsigned long p1, void *func, unsigned long new_stack); static void execute_on_irq_stack(void *func, unsigned long param1) { union irq_stack_union *union_ptr; unsigned long irq_stack; - raw_spinlock_t *irq_stack_in_use; + volatile unsigned int *irq_stack_in_use; union_ptr = &per_cpu(irq_stack_union, smp_processor_id()); irq_stack = (unsigned long) &union_ptr->stack; - irq_stack = ALIGN(irq_stack + sizeof(irq_stack_union.lock), + irq_stack = ALIGN(irq_stack + sizeof(irq_stack_union.slock), 64); /* align for stack frame usage */ /* We may be called recursive. If we are already using the irq stack, * just continue to use it. Use spinlocks to serialize * the irq stack usage. */ - irq_stack_in_use = &union_ptr->lock; - if (!raw_spin_trylock(irq_stack_in_use)) { + irq_stack_in_use = (volatile unsigned int *)__ldcw_align(union_ptr); + if (!__ldcw(irq_stack_in_use)) { void (*direct_call)(unsigned long p1) = func; /* We are using the IRQ stack already. @@ -482,10 +495,8 @@ static void execute_on_irq_stack(void *func, unsigned long param1) /* This is where we switch to the IRQ stack. */ call_on_stack(param1, func, irq_stack); - __inc_irq_stat(irq_stack_counter); - /* free up irq stack usage. */ - do_raw_spin_unlock(irq_stack_in_use); + *irq_stack_in_use = 1; } asmlinkage void do_softirq(void) -- cgit v1.2.3 From b17cb364dbbbf65add79f1610599d01bcb6851f9 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:12 +1000 Subject: xfs: fix missing KM_NOFS tags to keep lockdep happy There are several places where we use KM_SLEEP allocation contexts and use the fact that they are called from transaction context to add KM_NOFS where appropriate. Unfortunately, there are several places where the code makes this assumption but can be called from outside transaction context but with filesystem locks held. These places need explicit KM_NOFS annotations to avoid lockdep complaining about reclaim contexts. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit ac14876cf9255175bf3bdad645bf8aa2b8fb2d7c) --- fs/xfs/xfs_buf.c | 2 +- fs/xfs/xfs_da_btree.c | 6 ++++-- fs/xfs/xfs_dir2_leaf.c | 2 +- fs/xfs/xfs_log_cil.c | 2 +- 4 files changed, 7 insertions(+), 5 deletions(-) diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c index 82b70bda9f47..0d2554299688 100644 --- a/fs/xfs/xfs_buf.c +++ b/fs/xfs/xfs_buf.c @@ -1649,7 +1649,7 @@ xfs_alloc_buftarg( { xfs_buftarg_t *btp; - btp = kmem_zalloc(sizeof(*btp), KM_SLEEP); + btp = kmem_zalloc(sizeof(*btp), KM_SLEEP | KM_NOFS); btp->bt_mount = mp; btp->bt_dev = bdev->bd_dev; diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index 9b26a99ebfe9..41ea7e14a7b6 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -2464,7 +2464,8 @@ xfs_buf_map_from_irec( ASSERT(nirecs >= 1); if (nirecs > 1) { - map = kmem_zalloc(nirecs * sizeof(struct xfs_buf_map), KM_SLEEP); + map = kmem_zalloc(nirecs * sizeof(struct xfs_buf_map), + KM_SLEEP | KM_NOFS); if (!map) return ENOMEM; *mapp = map; @@ -2520,7 +2521,8 @@ xfs_dabuf_map( * Optimize the one-block case. */ if (nfsb != 1) - irecs = kmem_zalloc(sizeof(irec) * nfsb, KM_SLEEP); + irecs = kmem_zalloc(sizeof(irec) * nfsb, + KM_SLEEP | KM_NOFS); nirecs = nfsb; error = xfs_bmapi_read(dp, (xfs_fileoff_t)bno, nfsb, irecs, diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c index 721ba2fe8e54..da71a1819d78 100644 --- a/fs/xfs/xfs_dir2_leaf.c +++ b/fs/xfs/xfs_dir2_leaf.c @@ -1336,7 +1336,7 @@ xfs_dir2_leaf_getdents( mp->m_sb.sb_blocksize); map_info = kmem_zalloc(offsetof(struct xfs_dir2_leaf_map_info, map) + (length * sizeof(struct xfs_bmbt_irec)), - KM_SLEEP); + KM_SLEEP | KM_NOFS); map_info->map_size = length; /* diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c index e3d0b85d852b..d0833b54e55d 100644 --- a/fs/xfs/xfs_log_cil.c +++ b/fs/xfs/xfs_log_cil.c @@ -139,7 +139,7 @@ xlog_cil_prepare_log_vecs( new_lv = kmem_zalloc(sizeof(*new_lv) + niovecs * sizeof(struct xfs_log_iovec), - KM_SLEEP); + KM_SLEEP|KM_NOFS); /* The allocated iovec region lies beyond the log vector. */ new_lv->lv_iovecp = (struct xfs_log_iovec *)&new_lv[1]; -- cgit v1.2.3 From 7ced60cae46cb37273a03c196e6f473b089bd8e1 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:13 +1000 Subject: xfs: xfs_da3_node_read_verify() doesn't handle XFS_ATTR3_LEAF_MAGIC Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 72916fb8cbcf0c2928f56cdc2fbe8c7bf5517758) --- fs/xfs/xfs_da_btree.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index 41ea7e14a7b6..0b8b2a13cd24 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -270,6 +270,7 @@ xfs_da3_node_read_verify( break; return; case XFS_ATTR_LEAF_MAGIC: + case XFS_ATTR3_LEAF_MAGIC: bp->b_ops = &xfs_attr3_leaf_buf_ops; bp->b_ops->verify_read(bp); return; -- cgit v1.2.3 From cf257abf02709dba3cc745d950f144ce49432b4f Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:14 +1000 Subject: xfs: xfs_attr_shortform_allfit() does not handle attr3 format. xfstests generic/117 fails with: XFS: Assertion failed: leaf->hdr.info.magic == cpu_to_be16(XFS_ATTR_LEAF_MAGIC) indicating a function that does not handle the attr3 format correctly. Fix it. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit b38958d715316031fe9ea0cc6c22043072a55f49) --- fs/xfs/xfs_attr_leaf.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 08d5457c948e..8eeb88fb3201 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -931,20 +931,22 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context) */ int xfs_attr_shortform_allfit( - struct xfs_buf *bp, - struct xfs_inode *dp) + struct xfs_buf *bp, + struct xfs_inode *dp) { - xfs_attr_leafblock_t *leaf; - xfs_attr_leaf_entry_t *entry; + struct xfs_attr_leafblock *leaf; + struct xfs_attr_leaf_entry *entry; xfs_attr_leaf_name_local_t *name_loc; - int bytes, i; + struct xfs_attr3_icleaf_hdr leafhdr; + int bytes; + int i; leaf = bp->b_addr; - ASSERT(leaf->hdr.info.magic == cpu_to_be16(XFS_ATTR_LEAF_MAGIC)); + xfs_attr3_leaf_hdr_from_disk(&leafhdr, leaf); + entry = xfs_attr3_leaf_entryp(leaf); - entry = &leaf->entries[0]; bytes = sizeof(struct xfs_attr_sf_hdr); - for (i = 0; i < be16_to_cpu(leaf->hdr.count); entry++, i++) { + for (i = 0; i < leafhdr.count; entry++, i++) { if (entry->flags & XFS_ATTR_INCOMPLETE) continue; /* don't copy partial entries */ if (!(entry->flags & XFS_ATTR_LOCAL)) @@ -954,15 +956,15 @@ xfs_attr_shortform_allfit( return(0); if (be16_to_cpu(name_loc->valuelen) >= XFS_ATTR_SF_ENTSIZE_MAX) return(0); - bytes += sizeof(struct xfs_attr_sf_entry)-1 + bytes += sizeof(struct xfs_attr_sf_entry) - 1 + name_loc->namelen + be16_to_cpu(name_loc->valuelen); } if ((dp->i_mount->m_flags & XFS_MOUNT_ATTR2) && (dp->i_d.di_format != XFS_DINODE_FMT_BTREE) && (bytes == sizeof(struct xfs_attr_sf_hdr))) - return(-1); - return(xfs_attr_shortform_bytesfit(dp, bytes)); + return -1; + return xfs_attr_shortform_bytesfit(dp, bytes); } /* -- cgit v1.2.3 From 7ae077802c9f12959a81fa1a16c1ec2842dbae05 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:16 +1000 Subject: xfs: remote attribute lookups require the value length When reading a remote attribute, to correctly calculate the length of the data buffer for CRC enable filesystems, we need to know the length of the attribute data. We get this information when we look up the attribute, but we don't store it in the args structure along with the other remote attr information we get from the lookup. Add this information to the args structure so we can use it appropriately. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit e461fcb194172b3f709e0b478d2ac1bdac7ab9a3) --- fs/xfs/xfs_attr_leaf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 8eeb88fb3201..0bce1b348580 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -2332,9 +2332,10 @@ xfs_attr3_leaf_lookup_int( if (!xfs_attr_namesp_match(args->flags, entry->flags)) continue; args->index = probe; + args->valuelen = be32_to_cpu(name_rmt->valuelen); args->rmtblkno = be32_to_cpu(name_rmt->valueblk); args->rmtblkcnt = XFS_B_TO_FSB(args->dp->i_mount, - be32_to_cpu(name_rmt->valuelen)); + args->valuelen); return XFS_ERROR(EEXIST); } } -- cgit v1.2.3 From 585dc0c2f68981c02a0bb6fc8fe191a3f513959c Mon Sep 17 00:00:00 2001 From: Gernot Vormayr Date: Fri, 24 May 2013 15:55:03 -0700 Subject: drivers/block/xsysace.c: fix id with missing port-number If the port number is missing from the device-tree the device gets named xs` instead of xsa. This fixes the check for missing ids. Tested on ml507 board. Signed-off-by: Gernot Vormayr Cc: Greg Kroah-Hartman Cc: Jens Axboe Cc: Grant Likely Cc: Rob Herring Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/xsysace.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index f8ef15f37c5e..3fd130fdfbc1 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -1160,8 +1160,7 @@ static int ace_probe(struct platform_device *dev) dev_dbg(&dev->dev, "ace_probe(%p)\n", dev); /* device id and bus width */ - of_property_read_u32(dev->dev.of_node, "port-number", &id); - if (id < 0) + if (of_property_read_u32(dev->dev.of_node, "port-number", &id)) id = 0; if (of_find_property(dev->dev.of_node, "8-bit", NULL)) bus_width = ACE_BUS_WIDTH_8; -- cgit v1.2.3 From a11650e11093ed57dca78bf16e7836517c599098 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 24 May 2013 15:55:05 -0700 Subject: rapidio: make enumeration/discovery configurable Systems that use RapidIO fabric may need to implement their own enumeration and discovery methods which are better suitable for needs of a target application. The following set of patches is intended to simplify process of introduction of new RapidIO fabric enumeration/discovery methods. The first patch offers ability to add new RapidIO enumeration/discovery methods using kernel configuration options. This new configuration option mechanism allows to select statically linked or modular enumeration/discovery method(s) from the list of existing methods or use external module(s). This patch also updates the currently existing enumeration/discovery code to be used as a statically linked or modular method. The corresponding configuration option is named "Basic enumeration/discovery" method. This is the only one configuration option available today but new methods are expected to be introduced after adoption of provided patches. The second patch address a long time complaint of RapidIO subsystem users regarding fabric enumeration/discovery start sequence. Existing implementation offers only a boot-time enumeration/discovery start which requires synchronized boot of all endpoints in RapidIO network. While it works for small closed configurations with limited number of endpoints, using this approach in systems with large number of endpoints is quite challenging. To eliminate requirement for synchronized start the second patch introduces RapidIO enumeration/discovery start from user space. For compatibility with the existing RapidIO subsystem implementation, automatic boot time enumeration/discovery start can be configured in by specifying "rio-scan.scan=1" command line parameter if statically linked basic enumeration method is selected. This patch: Rework to implement RapidIO enumeration/discovery method selection combined with ability to use enumeration/discovery as a kernel module. This patch adds ability to introduce new RapidIO enumeration/discovery methods using kernel configuration options. Configuration option mechanism allows to select statically linked or modular enumeration/discovery method from the list of existing methods or use external modules. If a modular enumeration/discovery is selected each RapidIO mport device can have its own method attached to it. The existing enumeration/discovery code was updated to be used as statically linked or modular method. This configuration option is named "Basic enumeration/discovery" method. Several common routines have been moved from rio-scan.c to make them available to other enumeration methods and reduce number of exported symbols. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Andre van Herk Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/Kconfig | 20 ++++ drivers/rapidio/Makefile | 3 +- drivers/rapidio/rio-driver.c | 7 ++ drivers/rapidio/rio-scan.c | 166 ++++++++------------------------ drivers/rapidio/rio.c | 222 +++++++++++++++++++++++++++++++++++++++++-- drivers/rapidio/rio.h | 11 ++- include/linux/rio.h | 13 ++- include/linux/rio_drv.h | 1 + 8 files changed, 304 insertions(+), 139 deletions(-) diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig index 6194d35ebb97..5ab056494bbe 100644 --- a/drivers/rapidio/Kconfig +++ b/drivers/rapidio/Kconfig @@ -47,4 +47,24 @@ config RAPIDIO_DEBUG If you are unsure about this, say N here. +choice + prompt "Enumeration method" + depends on RAPIDIO + default RAPIDIO_ENUM_BASIC + help + There are different enumeration and discovery mechanisms offered + for RapidIO subsystem. You may select single built-in method or + or any number of methods to be built as modules. + Selecting a built-in method disables use of loadable methods. + + If unsure, select Basic built-in. + +config RAPIDIO_ENUM_BASIC + tristate "Basic" + help + This option includes basic RapidIO fabric enumeration and discovery + mechanism similar to one described in RapidIO specification Annex 1. + +endchoice + source "drivers/rapidio/switches/Kconfig" diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile index ec3fb8121004..3036702ffe8b 100644 --- a/drivers/rapidio/Makefile +++ b/drivers/rapidio/Makefile @@ -1,7 +1,8 @@ # # Makefile for RapidIO interconnect services # -obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o +obj-y += rio.o rio-access.o rio-driver.o rio-sysfs.o +obj-$(CONFIG_RAPIDIO_ENUM_BASIC) += rio-scan.o obj-$(CONFIG_RAPIDIO) += switches/ obj-$(CONFIG_RAPIDIO) += devices/ diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c index 0f4a53bdaa3c..55850bb21480 100644 --- a/drivers/rapidio/rio-driver.c +++ b/drivers/rapidio/rio-driver.c @@ -164,6 +164,13 @@ void rio_unregister_driver(struct rio_driver *rdrv) driver_unregister(&rdrv->driver); } +void rio_attach_device(struct rio_dev *rdev) +{ + rdev->dev.bus = &rio_bus_type; + rdev->dev.parent = &rio_bus; +} +EXPORT_SYMBOL_GPL(rio_attach_device); + /** * rio_match_bus - Tell if a RIO device structure has a matching RIO driver device id structure * @dev: the standard device structure to match against diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index a965acd3c0e4..7bdc67419cc3 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -37,12 +37,8 @@ #include "rio.h" -LIST_HEAD(rio_devices); - static void rio_init_em(struct rio_dev *rdev); -DEFINE_SPINLOCK(rio_global_list_lock); - static int next_destid = 0; static int next_comptag = 1; @@ -326,127 +322,6 @@ static int rio_is_switch(struct rio_dev *rdev) return 0; } -/** - * rio_switch_init - Sets switch operations for a particular vendor switch - * @rdev: RIO device - * @do_enum: Enumeration/Discovery mode flag - * - * Searches the RIO switch ops table for known switch types. If the vid - * and did match a switch table entry, then call switch initialization - * routine to setup switch-specific routines. - */ -static void rio_switch_init(struct rio_dev *rdev, int do_enum) -{ - struct rio_switch_ops *cur = __start_rio_switch_ops; - struct rio_switch_ops *end = __end_rio_switch_ops; - - while (cur < end) { - if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) { - pr_debug("RIO: calling init routine for %s\n", - rio_name(rdev)); - cur->init_hook(rdev, do_enum); - break; - } - cur++; - } - - if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) { - pr_debug("RIO: adding STD routing ops for %s\n", - rio_name(rdev)); - rdev->rswitch->add_entry = rio_std_route_add_entry; - rdev->rswitch->get_entry = rio_std_route_get_entry; - rdev->rswitch->clr_table = rio_std_route_clr_table; - } - - if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry) - printk(KERN_ERR "RIO: missing routing ops for %s\n", - rio_name(rdev)); -} - -/** - * rio_add_device- Adds a RIO device to the device model - * @rdev: RIO device - * - * Adds the RIO device to the global device list and adds the RIO - * device to the RIO device list. Creates the generic sysfs nodes - * for an RIO device. - */ -static int rio_add_device(struct rio_dev *rdev) -{ - int err; - - err = device_add(&rdev->dev); - if (err) - return err; - - spin_lock(&rio_global_list_lock); - list_add_tail(&rdev->global_list, &rio_devices); - spin_unlock(&rio_global_list_lock); - - rio_create_sysfs_dev_files(rdev); - - return 0; -} - -/** - * rio_enable_rx_tx_port - enable input receiver and output transmitter of - * given port - * @port: Master port associated with the RIO network - * @local: local=1 select local port otherwise a far device is reached - * @destid: Destination ID of the device to check host bit - * @hopcount: Number of hops to reach the target - * @port_num: Port (-number on switch) to enable on a far end device - * - * Returns 0 or 1 from on General Control Command and Status Register - * (EXT_PTR+0x3C) - */ -inline int rio_enable_rx_tx_port(struct rio_mport *port, - int local, u16 destid, - u8 hopcount, u8 port_num) { -#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS - u32 regval; - u32 ext_ftr_ptr; - - /* - * enable rx input tx output port - */ - pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = " - "%d, port_num = %d)\n", local, destid, hopcount, port_num); - - ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount); - - if (local) { - rio_local_read_config_32(port, ext_ftr_ptr + - RIO_PORT_N_CTL_CSR(0), - ®val); - } else { - if (rio_mport_read_config_32(port, destid, hopcount, - ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0) - return -EIO; - } - - if (regval & RIO_PORT_N_CTL_P_TYP_SER) { - /* serial */ - regval = regval | RIO_PORT_N_CTL_EN_RX_SER - | RIO_PORT_N_CTL_EN_TX_SER; - } else { - /* parallel */ - regval = regval | RIO_PORT_N_CTL_EN_RX_PAR - | RIO_PORT_N_CTL_EN_TX_PAR; - } - - if (local) { - rio_local_write_config_32(port, ext_ftr_ptr + - RIO_PORT_N_CTL_CSR(0), regval); - } else { - if (rio_mport_write_config_32(port, destid, hopcount, - ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0) - return -EIO; - } -#endif - return 0; -} - /** * rio_setup_device- Allocates and sets up a RIO device * @net: RIO network @@ -587,8 +462,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net, rdev->destid); } - rdev->dev.bus = &rio_bus_type; - rdev->dev.parent = &rio_bus; + rio_attach_device(rdev); device_initialize(&rdev->dev); rdev->dev.release = rio_release_dev; @@ -1421,3 +1295,41 @@ enum_done: bail: return -EBUSY; } + +static struct rio_scan rio_scan_ops = { + .enumerate = rio_enum_mport, + .discover = rio_disc_mport, +}; + +static bool scan; +module_param(scan, bool, 0); +MODULE_PARM_DESC(scan, "Start RapidIO network enumeration/discovery " + "(default = 0)"); + +/** + * rio_basic_attach: + * + * When this enumeration/discovery method is loaded as a module this function + * registers its specific enumeration and discover routines for all available + * RapidIO mport devices. The "scan" command line parameter controls ability of + * the module to start RapidIO enumeration/discovery automatically. + * + * Returns 0 for success or -EIO if unable to register itself. + * + * This enumeration/discovery method cannot be unloaded and therefore does not + * provide a matching cleanup_module routine. + */ + +static int __init rio_basic_attach(void) +{ + if (rio_register_scan(RIO_MPORT_ANY, &rio_scan_ops)) + return -EIO; + if (scan) + rio_init_mports(); + return 0; +} + +late_initcall(rio_basic_attach); + +MODULE_DESCRIPTION("Basic RapidIO enumeration/discovery"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index d553b5d13722..6e75dda34799 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -31,7 +31,11 @@ #include "rio.h" +static LIST_HEAD(rio_devices); +static DEFINE_SPINLOCK(rio_global_list_lock); + static LIST_HEAD(rio_mports); +static DEFINE_MUTEX(rio_mport_list_lock); static unsigned char next_portid; static DEFINE_SPINLOCK(rio_mmap_lock); @@ -52,6 +56,32 @@ u16 rio_local_get_device_id(struct rio_mport *port) return (RIO_GET_DID(port->sys_size, result)); } +/** + * rio_add_device- Adds a RIO device to the device model + * @rdev: RIO device + * + * Adds the RIO device to the global device list and adds the RIO + * device to the RIO device list. Creates the generic sysfs nodes + * for an RIO device. + */ +int rio_add_device(struct rio_dev *rdev) +{ + int err; + + err = device_add(&rdev->dev); + if (err) + return err; + + spin_lock(&rio_global_list_lock); + list_add_tail(&rdev->global_list, &rio_devices); + spin_unlock(&rio_global_list_lock); + + rio_create_sysfs_dev_files(rdev); + + return 0; +} +EXPORT_SYMBOL_GPL(rio_add_device); + /** * rio_request_inb_mbox - request inbound mailbox service * @mport: RIO master port from which to allocate the mailbox resource @@ -489,6 +519,7 @@ rio_mport_get_physefb(struct rio_mport *port, int local, return ext_ftr_ptr; } +EXPORT_SYMBOL_GPL(rio_mport_get_physefb); /** * rio_get_comptag - Begin or continue searching for a RIO device by component tag @@ -521,6 +552,7 @@ exit: spin_unlock(&rio_global_list_lock); return rdev; } +EXPORT_SYMBOL_GPL(rio_get_comptag); /** * rio_set_port_lockout - Sets/clears LOCKOUT bit (RIO EM 1.3) for a switch port. @@ -545,6 +577,107 @@ int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock) regval); return 0; } +EXPORT_SYMBOL_GPL(rio_set_port_lockout); + +/** + * rio_switch_init - Sets switch operations for a particular vendor switch + * @rdev: RIO device + * @do_enum: Enumeration/Discovery mode flag + * + * Searches the RIO switch ops table for known switch types. If the vid + * and did match a switch table entry, then call switch initialization + * routine to setup switch-specific routines. + */ +void rio_switch_init(struct rio_dev *rdev, int do_enum) +{ + struct rio_switch_ops *cur = __start_rio_switch_ops; + struct rio_switch_ops *end = __end_rio_switch_ops; + + while (cur < end) { + if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) { + pr_debug("RIO: calling init routine for %s\n", + rio_name(rdev)); + cur->init_hook(rdev, do_enum); + break; + } + cur++; + } + + if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) { + pr_debug("RIO: adding STD routing ops for %s\n", + rio_name(rdev)); + rdev->rswitch->add_entry = rio_std_route_add_entry; + rdev->rswitch->get_entry = rio_std_route_get_entry; + rdev->rswitch->clr_table = rio_std_route_clr_table; + } + + if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry) + printk(KERN_ERR "RIO: missing routing ops for %s\n", + rio_name(rdev)); +} +EXPORT_SYMBOL_GPL(rio_switch_init); + +/** + * rio_enable_rx_tx_port - enable input receiver and output transmitter of + * given port + * @port: Master port associated with the RIO network + * @local: local=1 select local port otherwise a far device is reached + * @destid: Destination ID of the device to check host bit + * @hopcount: Number of hops to reach the target + * @port_num: Port (-number on switch) to enable on a far end device + * + * Returns 0 or 1 from on General Control Command and Status Register + * (EXT_PTR+0x3C) + */ +int rio_enable_rx_tx_port(struct rio_mport *port, + int local, u16 destid, + u8 hopcount, u8 port_num) +{ +#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS + u32 regval; + u32 ext_ftr_ptr; + + /* + * enable rx input tx output port + */ + pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = " + "%d, port_num = %d)\n", local, destid, hopcount, port_num); + + ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount); + + if (local) { + rio_local_read_config_32(port, ext_ftr_ptr + + RIO_PORT_N_CTL_CSR(0), + ®val); + } else { + if (rio_mport_read_config_32(port, destid, hopcount, + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0) + return -EIO; + } + + if (regval & RIO_PORT_N_CTL_P_TYP_SER) { + /* serial */ + regval = regval | RIO_PORT_N_CTL_EN_RX_SER + | RIO_PORT_N_CTL_EN_TX_SER; + } else { + /* parallel */ + regval = regval | RIO_PORT_N_CTL_EN_RX_PAR + | RIO_PORT_N_CTL_EN_TX_PAR; + } + + if (local) { + rio_local_write_config_32(port, ext_ftr_ptr + + RIO_PORT_N_CTL_CSR(0), regval); + } else { + if (rio_mport_write_config_32(port, destid, hopcount, + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0) + return -EIO; + } +#endif + return 0; +} +EXPORT_SYMBOL_GPL(rio_enable_rx_tx_port); + /** * rio_chk_dev_route - Validate route to the specified device. @@ -610,6 +743,7 @@ rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount) return 0; } +EXPORT_SYMBOL_GPL(rio_mport_chk_dev_access); /** * rio_chk_dev_access - Validate access to the specified device. @@ -941,6 +1075,7 @@ rio_mport_get_efb(struct rio_mport *port, int local, u16 destid, return RIO_GET_BLOCK_ID(reg_val); } } +EXPORT_SYMBOL_GPL(rio_mport_get_efb); /** * rio_mport_get_feature - query for devices' extended features @@ -997,6 +1132,7 @@ rio_mport_get_feature(struct rio_mport * port, int local, u16 destid, return 0; } +EXPORT_SYMBOL_GPL(rio_mport_get_feature); /** * rio_get_asm - Begin or continue searching for a RIO device by vid/did/asm_vid/asm_did @@ -1246,6 +1382,71 @@ EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg); #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ +/** + * rio_register_scan - enumeration/discovery method registration interface + * @mport_id: mport device ID for which fabric scan routine has to be set + * (RIO_MPORT_ANY = set for all available mports) + * @scan_ops: enumeration/discovery control structure + * + * Assigns enumeration or discovery method to the specified mport device (or all + * available mports if RIO_MPORT_ANY is specified). + * Returns error if the mport already has an enumerator attached to it. + * In case of RIO_MPORT_ANY ignores ports with valid scan routines and returns + * an error if was unable to find at least one available mport. + */ +int rio_register_scan(int mport_id, struct rio_scan *scan_ops) +{ + struct rio_mport *port; + int rc = -EBUSY; + + mutex_lock(&rio_mport_list_lock); + list_for_each_entry(port, &rio_mports, node) { + if (port->id == mport_id || mport_id == RIO_MPORT_ANY) { + if (port->nscan && mport_id == RIO_MPORT_ANY) + continue; + else if (port->nscan) + break; + + port->nscan = scan_ops; + rc = 0; + + if (mport_id != RIO_MPORT_ANY) + break; + } + } + mutex_unlock(&rio_mport_list_lock); + + return rc; +} +EXPORT_SYMBOL_GPL(rio_register_scan); + +/** + * rio_unregister_scan - removes enumeration/discovery method from mport + * @mport_id: mport device ID for which fabric scan routine has to be + * unregistered (RIO_MPORT_ANY = set for all available mports) + * + * Removes enumeration or discovery method assigned to the specified mport + * device (or all available mports if RIO_MPORT_ANY is specified). + */ +int rio_unregister_scan(int mport_id) +{ + struct rio_mport *port; + + mutex_lock(&rio_mport_list_lock); + list_for_each_entry(port, &rio_mports, node) { + if (port->id == mport_id || mport_id == RIO_MPORT_ANY) { + if (port->nscan) + port->nscan = NULL; + if (mport_id != RIO_MPORT_ANY) + break; + } + } + mutex_unlock(&rio_mport_list_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(rio_unregister_scan); + static void rio_fixup_device(struct rio_dev *dev) { } @@ -1274,7 +1475,7 @@ static void disc_work_handler(struct work_struct *_work) work = container_of(_work, struct rio_disc_work, work); pr_debug("RIO: discovery work for mport %d %s\n", work->mport->id, work->mport->name); - rio_disc_mport(work->mport); + work->mport->nscan->discover(work->mport); } int rio_init_mports(void) @@ -1290,12 +1491,15 @@ int rio_init_mports(void) * First, run enumerations and check if we need to perform discovery * on any of the registered mports. */ + mutex_lock(&rio_mport_list_lock); list_for_each_entry(port, &rio_mports, node) { - if (port->host_deviceid >= 0) - rio_enum_mport(port); - else + if (port->host_deviceid >= 0) { + if (port->nscan) + port->nscan->enumerate(port); + } else n++; } + mutex_unlock(&rio_mport_list_lock); if (!n) goto no_disc; @@ -1322,14 +1526,16 @@ int rio_init_mports(void) } n = 0; + mutex_lock(&rio_mport_list_lock); list_for_each_entry(port, &rio_mports, node) { - if (port->host_deviceid < 0) { + if (port->host_deviceid < 0 && port->nscan) { work[n].mport = port; INIT_WORK(&work[n].work, disc_work_handler); queue_work(rio_wq, &work[n].work); n++; } } + mutex_unlock(&rio_mport_list_lock); flush_workqueue(rio_wq); pr_debug("RIO: destroy discovery workqueue\n"); @@ -1342,8 +1548,6 @@ no_disc: return 0; } -device_initcall_sync(rio_init_mports); - static int hdids[RIO_MAX_MPORTS + 1]; static int rio_get_hdid(int index) @@ -1371,7 +1575,10 @@ int rio_register_mport(struct rio_mport *port) port->id = next_portid++; port->host_deviceid = rio_get_hdid(port->id); + port->nscan = NULL; + mutex_lock(&rio_mport_list_lock); list_add_tail(&port->node, &rio_mports); + mutex_unlock(&rio_mport_list_lock); return 0; } @@ -1386,3 +1593,4 @@ EXPORT_SYMBOL_GPL(rio_request_inb_mbox); EXPORT_SYMBOL_GPL(rio_release_inb_mbox); EXPORT_SYMBOL_GPL(rio_request_outb_mbox); EXPORT_SYMBOL_GPL(rio_release_outb_mbox); +EXPORT_SYMBOL_GPL(rio_init_mports); diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h index b1af414f15e6..0afdf482517e 100644 --- a/drivers/rapidio/rio.h +++ b/drivers/rapidio/rio.h @@ -15,6 +15,7 @@ #include #define RIO_MAX_CHK_RETRY 3 +#define RIO_MPORT_ANY (-1) /* Functions internal to the RIO core code */ @@ -27,8 +28,6 @@ extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid, extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount); extern int rio_create_sysfs_dev_files(struct rio_dev *rdev); -extern int rio_enum_mport(struct rio_mport *mport); -extern int rio_disc_mport(struct rio_mport *mport); extern int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 route_port); @@ -39,10 +38,16 @@ extern int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table); extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock); extern struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from); +extern int rio_add_device(struct rio_dev *rdev); +extern void rio_switch_init(struct rio_dev *rdev, int do_enum); +extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid, + u8 hopcount, u8 port_num); +extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops); +extern int rio_unregister_scan(int mport_id); +extern void rio_attach_device(struct rio_dev *rdev); /* Structures internal to the RIO core code */ extern struct device_attribute rio_dev_attrs[]; -extern spinlock_t rio_global_list_lock; extern struct rio_switch_ops __start_rio_switch_ops[]; extern struct rio_switch_ops __end_rio_switch_ops[]; diff --git a/include/linux/rio.h b/include/linux/rio.h index a3e784278667..cd3796ee7410 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -83,7 +83,6 @@ extern struct bus_type rio_bus_type; extern struct device rio_bus; -extern struct list_head rio_devices; /* list of all devices */ struct rio_mport; struct rio_dev; @@ -237,6 +236,7 @@ enum rio_phy_type { * @name: Port name string * @priv: Master port private data * @dma: DMA device associated with mport + * @nscan: RapidIO network enumeration/discovery operations */ struct rio_mport { struct list_head dbells; /* list of doorbell events */ @@ -262,6 +262,7 @@ struct rio_mport { #ifdef CONFIG_RAPIDIO_DMA_ENGINE struct dma_device dma; #endif + struct rio_scan *nscan; }; struct rio_id_table { @@ -460,6 +461,16 @@ static inline struct rio_mport *dma_to_mport(struct dma_device *ddev) } #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ +/** + * struct rio_scan - RIO enumeration and discovery operations + * @enumerate: Callback to perform RapidIO fabric enumeration. + * @discover: Callback to perform RapidIO fabric discovery. + */ +struct rio_scan { + int (*enumerate)(struct rio_mport *mport); + int (*discover)(struct rio_mport *mport); +}; + /* Architecture and hardware-specific functions */ extern int rio_register_mport(struct rio_mport *); extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int); diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h index b75c05920ab5..5059994fe297 100644 --- a/include/linux/rio_drv.h +++ b/include/linux/rio_drv.h @@ -433,5 +433,6 @@ extern u16 rio_local_get_device_id(struct rio_mport *port); extern struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from); extern struct rio_dev *rio_get_asm(u16 vid, u16 did, u16 asm_vid, u16 asm_did, struct rio_dev *from); +extern int rio_init_mports(void); #endif /* LINUX_RIO_DRV_H */ -- cgit v1.2.3 From bc8fcfea18249640f2728c46d70999dcb7e4dc49 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 24 May 2013 15:55:06 -0700 Subject: rapidio: add enumeration/discovery start from user space Add RapidIO enumeration/discovery start from user space. User space start allows to defer RapidIO fabric scan until the moment when all participating endpoints are initialized avoiding mandatory synchronized start of all endpoints (which may be challenging in systems with large number of RapidIO endpoints). Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Andre van Herk Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/rio-driver.c | 1 + drivers/rapidio/rio-scan.c | 24 ++++++++++++++++++++--- drivers/rapidio/rio-sysfs.c | 45 ++++++++++++++++++++++++++++++++++++++++++++ drivers/rapidio/rio.c | 28 +++++++++++++++++++++++++-- drivers/rapidio/rio.h | 2 ++ include/linux/rio.h | 9 +++++++-- 6 files changed, 102 insertions(+), 7 deletions(-) diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c index 55850bb21480..a0c875563d76 100644 --- a/drivers/rapidio/rio-driver.c +++ b/drivers/rapidio/rio-driver.c @@ -207,6 +207,7 @@ struct bus_type rio_bus_type = { .name = "rapidio", .match = rio_match_bus, .dev_attrs = rio_dev_attrs, + .bus_attrs = rio_bus_attrs, .probe = rio_device_probe, .remove = rio_device_remove, }; diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index 7bdc67419cc3..4c15dbf81087 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -1134,19 +1134,30 @@ static void rio_pw_enable(struct rio_mport *port, int enable) /** * rio_enum_mport- Start enumeration through a master port * @mport: Master port to send transactions + * @flags: Enumeration control flags * * Starts the enumeration process. If somebody has enumerated our * master port device, then give up. If not and we have an active * link, then start recursive peer enumeration. Returns %0 if * enumeration succeeds or %-EBUSY if enumeration fails. */ -int rio_enum_mport(struct rio_mport *mport) +int rio_enum_mport(struct rio_mport *mport, u32 flags) { struct rio_net *net = NULL; int rc = 0; printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id, mport->name); + + /* + * To avoid multiple start requests (repeat enumeration is not supported + * by this method) check if enumeration/discovery was performed for this + * mport: if mport was added into the list of mports for a net exit + * with error. + */ + if (mport->nnode.next || mport->nnode.prev) + return -EBUSY; + /* If somebody else enumerated our master port device, bail. */ if (rio_enum_host(mport) < 0) { printk(KERN_INFO @@ -1236,14 +1247,16 @@ static void rio_build_route_tables(struct rio_net *net) /** * rio_disc_mport- Start discovery through a master port * @mport: Master port to send transactions + * @flags: discovery control flags * * Starts the discovery process. If we have an active link, - * then wait for the signal that enumeration is complete. + * then wait for the signal that enumeration is complete (if wait + * is allowed). * When enumeration completion is signaled, start recursive * peer discovery. Returns %0 if discovery succeeds or %-EBUSY * on failure. */ -int rio_disc_mport(struct rio_mport *mport) +int rio_disc_mport(struct rio_mport *mport, u32 flags) { struct rio_net *net = NULL; unsigned long to_end; @@ -1253,6 +1266,11 @@ int rio_disc_mport(struct rio_mport *mport) /* If master port has an active link, allocate net and discover peers */ if (rio_mport_is_active(mport)) { + if (rio_enum_complete(mport)) + goto enum_done; + else if (flags & RIO_SCAN_ENUM_NO_WAIT) + return -EAGAIN; + pr_debug("RIO: wait for enumeration to complete...\n"); to_end = jiffies + CONFIG_RAPIDIO_DISC_TIMEOUT * HZ; diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c index 4dbe360989be..66d4acd5e18f 100644 --- a/drivers/rapidio/rio-sysfs.c +++ b/drivers/rapidio/rio-sysfs.c @@ -285,3 +285,48 @@ void rio_remove_sysfs_dev_files(struct rio_dev *rdev) rdev->rswitch->sw_sysfs(rdev, RIO_SW_SYSFS_REMOVE); } } + +static ssize_t bus_scan_store(struct bus_type *bus, const char *buf, + size_t count) +{ + long val; + struct rio_mport *port = NULL; + int rc; + + if (kstrtol(buf, 0, &val) < 0) + return -EINVAL; + + if (val == RIO_MPORT_ANY) { + rc = rio_init_mports(); + goto exit; + } + + if (val < 0 || val >= RIO_MAX_MPORTS) + return -EINVAL; + + port = rio_find_mport((int)val); + + if (!port) { + pr_debug("RIO: %s: mport_%d not available\n", + __func__, (int)val); + return -EINVAL; + } + + if (!port->nscan) + return -EINVAL; + + if (port->host_deviceid >= 0) + rc = port->nscan->enumerate(port, 0); + else + rc = port->nscan->discover(port, RIO_SCAN_ENUM_NO_WAIT); +exit: + if (!rc) + rc = count; + + return rc; +} + +struct bus_attribute rio_bus_attrs[] = { + __ATTR(scan, (S_IWUSR|S_IWGRP), NULL, bus_scan_store), + __ATTR_NULL +}; diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index 6e75dda34799..cb1c08996fbb 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -1382,6 +1382,30 @@ EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg); #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ +/** + * rio_find_mport - find RIO mport by its ID + * @mport_id: number (ID) of mport device + * + * Given a RIO mport number, the desired mport is located + * in the global list of mports. If the mport is found, a pointer to its + * data structure is returned. If no mport is found, %NULL is returned. + */ +struct rio_mport *rio_find_mport(int mport_id) +{ + struct rio_mport *port; + + mutex_lock(&rio_mport_list_lock); + list_for_each_entry(port, &rio_mports, node) { + if (port->id == mport_id) + goto found; + } + port = NULL; +found: + mutex_unlock(&rio_mport_list_lock); + + return port; +} + /** * rio_register_scan - enumeration/discovery method registration interface * @mport_id: mport device ID for which fabric scan routine has to be set @@ -1475,7 +1499,7 @@ static void disc_work_handler(struct work_struct *_work) work = container_of(_work, struct rio_disc_work, work); pr_debug("RIO: discovery work for mport %d %s\n", work->mport->id, work->mport->name); - work->mport->nscan->discover(work->mport); + work->mport->nscan->discover(work->mport, 0); } int rio_init_mports(void) @@ -1495,7 +1519,7 @@ int rio_init_mports(void) list_for_each_entry(port, &rio_mports, node) { if (port->host_deviceid >= 0) { if (port->nscan) - port->nscan->enumerate(port); + port->nscan->enumerate(port, 0); } else n++; } diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h index 0afdf482517e..c14f864dea5c 100644 --- a/drivers/rapidio/rio.h +++ b/drivers/rapidio/rio.h @@ -45,9 +45,11 @@ extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid, extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops); extern int rio_unregister_scan(int mport_id); extern void rio_attach_device(struct rio_dev *rdev); +extern struct rio_mport *rio_find_mport(int mport_id); /* Structures internal to the RIO core code */ extern struct device_attribute rio_dev_attrs[]; +extern struct bus_attribute rio_bus_attrs[]; extern struct rio_switch_ops __start_rio_switch_ops[]; extern struct rio_switch_ops __end_rio_switch_ops[]; diff --git a/include/linux/rio.h b/include/linux/rio.h index cd3796ee7410..18e099342e6f 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -265,6 +265,11 @@ struct rio_mport { struct rio_scan *nscan; }; +/* + * Enumeration/discovery control flags + */ +#define RIO_SCAN_ENUM_NO_WAIT 0x00000001 /* Do not wait for enum completed */ + struct rio_id_table { u16 start; /* logical minimal id */ u32 max; /* max number of IDs in table */ @@ -467,8 +472,8 @@ static inline struct rio_mport *dma_to_mport(struct dma_device *ddev) * @discover: Callback to perform RapidIO fabric discovery. */ struct rio_scan { - int (*enumerate)(struct rio_mport *mport); - int (*discover)(struct rio_mport *mport); + int (*enumerate)(struct rio_mport *mport, u32 flags); + int (*discover)(struct rio_mport *mport, u32 flags); }; /* Architecture and hardware-specific functions */ -- cgit v1.2.3 From 5eeb929390de7d5219483a1ca10cce4a84066099 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 24 May 2013 15:55:07 -0700 Subject: rapidio: documentation update for enumeration changes Update RapidIO documentation to reflect changes made to enumeration/discovery build configuration and user space triggering mechanism. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Andre van Herk Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/rapidio/rapidio.txt | 128 ++++++++++++++++++++++++++++++++++---- Documentation/rapidio/sysfs.txt | 17 +++++ 2 files changed, 134 insertions(+), 11 deletions(-) diff --git a/Documentation/rapidio/rapidio.txt b/Documentation/rapidio/rapidio.txt index c75694b35d08..a9c16c979da2 100644 --- a/Documentation/rapidio/rapidio.txt +++ b/Documentation/rapidio/rapidio.txt @@ -79,20 +79,63 @@ master port that is used to communicate with devices within the network. In order to initialize the RapidIO subsystem, a platform must initialize and register at least one master port within the RapidIO network. To register mport within the subsystem controller driver initialization code calls function -rio_register_mport() for each available master port. After all active master -ports are registered with a RapidIO subsystem, the rio_init_mports() routine -is called to perform enumeration and discovery. +rio_register_mport() for each available master port. -In the current PowerPC-based implementation a subsys_initcall() is specified to -perform controller initialization and mport registration. At the end it directly -calls rio_init_mports() to execute RapidIO enumeration and discovery. +RapidIO subsystem uses subsys_initcall() or device_initcall() to perform +controller initialization (depending on controller device type). + +After all active master ports are registered with a RapidIO subsystem, +an enumeration and/or discovery routine may be called automatically or +by user-space command. 4. Enumeration and Discovery ---------------------------- -When rio_init_mports() is called it scans a list of registered master ports and -calls an enumeration or discovery routine depending on the configured role of a -master port: host or agent. +4.1 Overview +------------ + +RapidIO subsystem configuration options allow users to specify enumeration and +discovery methods as statically linked components or loadable modules. +An enumeration/discovery method implementation and available input parameters +define how any given method can be attached to available RapidIO mports: +simply to all available mports OR individually to the specified mport device. + +Depending on selected enumeration/discovery build configuration, there are +several methods to initiate an enumeration and/or discovery process: + + (a) Statically linked enumeration and discovery process can be started + automatically during kernel initialization time using corresponding module + parameters. This was the original method used since introduction of RapidIO + subsystem. Now this method relies on enumerator module parameter which is + 'rio-scan.scan' for existing basic enumeration/discovery method. + When automatic start of enumeration/discovery is used a user has to ensure + that all discovering endpoints are started before the enumerating endpoint + and are waiting for enumeration to be completed. + Configuration option CONFIG_RAPIDIO_DISC_TIMEOUT defines time that discovering + endpoint waits for enumeration to be completed. If the specified timeout + expires the discovery process is terminated without obtaining RapidIO network + information. NOTE: a timed out discovery process may be restarted later using + a user-space command as it is described later if the given endpoint was + enumerated successfully. + + (b) Statically linked enumeration and discovery process can be started by + a command from user space. This initiation method provides more flexibility + for a system startup compared to the option (a) above. After all participating + endpoints have been successfully booted, an enumeration process shall be + started first by issuing a user-space command, after an enumeration is + completed a discovery process can be started on all remaining endpoints. + + (c) Modular enumeration and discovery process can be started by a command from + user space. After an enumeration/discovery module is loaded, a network scan + process can be started by issuing a user-space command. + Similar to the option (b) above, an enumerator has to be started first. + + (d) Modular enumeration and discovery process can be started by a module + initialization routine. In this case an enumerating module shall be loaded + first. + +When a network scan process is started it calls an enumeration or discovery +routine depending on the configured role of a master port: host or agent. Enumeration is performed by a master port if it is configured as a host port by assigning a host device ID greater than or equal to zero. A host device ID is @@ -104,8 +147,58 @@ for it. The enumeration and discovery routines use RapidIO maintenance transactions to access the configuration space of devices. -The enumeration process is implemented according to the enumeration algorithm -outlined in the RapidIO Interconnect Specification: Annex I [1]. +4.2 Automatic Start of Enumeration and Discovery +------------------------------------------------ + +Automatic enumeration/discovery start method is applicable only to built-in +enumeration/discovery RapidIO configuration selection. To enable automatic +enumeration/discovery start by existing basic enumerator method set use boot +command line parameter "rio-scan.scan=1". + +This configuration requires synchronized start of all RapidIO endpoints that +form a network which will be enumerated/discovered. Discovering endpoints have +to be started before an enumeration starts to ensure that all RapidIO +controllers have been initialized and are ready to be discovered. Configuration +parameter CONFIG_RAPIDIO_DISC_TIMEOUT defines time (in seconds) which +a discovering endpoint will wait for enumeration to be completed. + +When automatic enumeration/discovery start is selected, basic method's +initialization routine calls rio_init_mports() to perform enumeration or +discovery for all known mport devices. + +Depending on RapidIO network size and configuration this automatic +enumeration/discovery start method may be difficult to use due to the +requirement for synchronized start of all endpoints. + +4.3 User-space Start of Enumeration and Discovery +------------------------------------------------- + +User-space start of enumeration and discovery can be used with built-in and +modular build configurations. For user-space controlled start RapidIO subsystem +creates the sysfs write-only attribute file '/sys/bus/rapidio/scan'. To initiate +an enumeration or discovery process on specific mport device, a user needs to +write mport_ID (not RapidIO destination ID) into that file. The mport_ID is a +sequential number (0 ... RIO_MAX_MPORTS) assigned during mport device +registration. For example for machine with single RapidIO controller, mport_ID +for that controller always will be 0. + +To initiate RapidIO enumeration/discovery on all available mports a user may +write '-1' (or RIO_MPORT_ANY) into the scan attribute file. + +4.4 Basic Enumeration Method +---------------------------- + +This is an original enumeration/discovery method which is available since +first release of RapidIO subsystem code. The enumeration process is +implemented according to the enumeration algorithm outlined in the RapidIO +Interconnect Specification: Annex I [1]. + +This method can be configured as statically linked or loadable module. +The method's single parameter "scan" allows to trigger the enumeration/discovery +process from module initialization routine. + +This enumeration/discovery method can be started only once and does not support +unloading if it is built as a module. The enumeration process traverses the network using a recursive depth-first algorithm. When a new device is found, the enumerator takes ownership of that @@ -160,6 +253,19 @@ time period. If this wait time period expires before enumeration is completed, an agent skips RapidIO discovery and continues with remaining kernel initialization. +4.5 Adding New Enumeration/Discovery Method +------------------------------------------- + +RapidIO subsystem code organization allows addition of new enumeration/discovery +methods as new configuration options without significant impact to to the core +RapidIO code. + +A new enumeration/discovery method has to be attached to one or more mport +devices before an enumeration/discovery process can be started. Normally, +method's module initialization routine calls rio_register_scan() to attach +an enumerator to a specified mport device (or devices). The basic enumerator +implementation demonstrates this process. + 5. References ------------- diff --git a/Documentation/rapidio/sysfs.txt b/Documentation/rapidio/sysfs.txt index 97f71ce575d6..19878179da4c 100644 --- a/Documentation/rapidio/sysfs.txt +++ b/Documentation/rapidio/sysfs.txt @@ -88,3 +88,20 @@ that exports additional attributes. IDT_GEN2: errlog - reads contents of device error log until it is empty. + + +5. RapidIO Bus Attributes +------------------------- + +RapidIO bus subdirectory /sys/bus/rapidio implements the following bus-specific +attribute: + + scan - allows to trigger enumeration discovery process from user space. This + is a write-only attribute. To initiate an enumeration or discovery + process on specific mport device, a user needs to write mport_ID (not + RapidIO destination ID) into this file. The mport_ID is a sequential + number (0 ... RIO_MAX_MPORTS) assigned to the mport device. + For example, for a machine with a single RapidIO controller, mport_ID + for that controller always will be 0. + To initiate RapidIO enumeration/discovery on all available mports + a user must write '-1' (or RIO_MPORT_ANY) into this attribute file. -- cgit v1.2.3 From 7b92d03c3239f43e5b86c9cc9630f026d36ee995 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Fri, 24 May 2013 15:55:08 -0700 Subject: fat: fix possible overflow for fat_clusters Intermediate value of fat_clusters can be overflowed on 32bits arch. Reported-by: Krzysztof Strasburger Signed-off-by: OGAWA Hirofumi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/inode.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/fs/fat/inode.c b/fs/fat/inode.c index dfce656ddb33..5d4513cb1b3c 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -1229,6 +1229,19 @@ static int fat_read_root(struct inode *inode) return 0; } +static unsigned long calc_fat_clusters(struct super_block *sb) +{ + struct msdos_sb_info *sbi = MSDOS_SB(sb); + + /* Divide first to avoid overflow */ + if (sbi->fat_bits != 12) { + unsigned long ent_per_sec = sb->s_blocksize * 8 / sbi->fat_bits; + return ent_per_sec * sbi->fat_length; + } + + return sbi->fat_length * sb->s_blocksize * 8 / sbi->fat_bits; +} + /* * Read the super block of an MS-DOS FS. */ @@ -1434,7 +1447,7 @@ int fat_fill_super(struct super_block *sb, void *data, int silent, int isvfat, sbi->dirty = b->fat16.state & FAT_STATE_DIRTY; /* check that FAT table does not overflow */ - fat_clusters = sbi->fat_length * sb->s_blocksize * 8 / sbi->fat_bits; + fat_clusters = calc_fat_clusters(sb); total_clusters = min(total_clusters, fat_clusters - FAT_START_ENT); if (total_clusters > MAX_FAT(sb)) { if (!silent) -- cgit v1.2.3 From 4c663cfc523a88d97a8309b04a089c27dc57fd7e Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Fri, 24 May 2013 15:55:09 -0700 Subject: wait: fix false timeouts when using wait_event_timeout() Many callers of the wait_event_timeout() and wait_event_interruptible_timeout() expect that the return value will be positive if the specified condition becomes true before the timeout elapses. However, at the moment this isn't guaranteed. If the wake-up handler is delayed enough, the time remaining until timeout will be calculated as 0 - and passed back as a return value - even if the condition became true before the timeout has passed. Fix this by returning at least 1 if the condition becomes true. This semantic is in line with what wait_for_condition_timeout() does; see commit bb10ed09 ("sched: fix wait_for_completion_timeout() spurious failure under heavy load"). Daniel said "We have 3 instances of this bug in drm/i915. One case even where we switch between the interruptible and not interruptible wait_event_timeout variants, foolishly presuming they have the same semantics. I very much like this." One such bug is reported at https://bugs.freedesktop.org/show_bug.cgi?id=64133 Signed-off-by: Imre Deak Acked-by: Daniel Vetter Acked-by: David Howells Acked-by: Jens Axboe Cc: "Paul E. McKenney" Cc: Dave Jones Cc: Lukas Czerner Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/wait.h | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/include/linux/wait.h b/include/linux/wait.h index ac38be2692d8..1133695eb067 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -217,6 +217,8 @@ do { \ if (!ret) \ break; \ } \ + if (!ret && (condition)) \ + ret = 1; \ finish_wait(&wq, &__wait); \ } while (0) @@ -233,8 +235,9 @@ do { \ * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * - * The function returns 0 if the @timeout elapsed, and the remaining - * jiffies if the condition evaluated to true before the timeout elapsed. + * The function returns 0 if the @timeout elapsed, or the remaining + * jiffies (at least 1) if the @condition evaluated to %true before + * the @timeout elapsed. */ #define wait_event_timeout(wq, condition, timeout) \ ({ \ @@ -302,6 +305,8 @@ do { \ ret = -ERESTARTSYS; \ break; \ } \ + if (!ret && (condition)) \ + ret = 1; \ finish_wait(&wq, &__wait); \ } while (0) @@ -318,9 +323,10 @@ do { \ * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * - * The function returns 0 if the @timeout elapsed, -ERESTARTSYS if it - * was interrupted by a signal, and the remaining jiffies otherwise - * if the condition evaluated to true before the timeout elapsed. + * Returns: + * 0 if the @timeout elapsed, -%ERESTARTSYS if it was interrupted by + * a signal, or the remaining jiffies (at least 1) if the @condition + * evaluated to %true before the @timeout elapsed. */ #define wait_event_interruptible_timeout(wq, condition, timeout) \ ({ \ -- cgit v1.2.3 From d34883d4e35c0a994e91dd847a82b4c9e0c31d83 Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Fri, 24 May 2013 15:55:11 -0700 Subject: mm: mmu_notifier: re-fix freed page still mapped in secondary MMU Commit 751efd8610d3 ("mmu_notifier_unregister NULL Pointer deref and multiple ->release()") breaks the fix 3ad3d901bbcf ("mm: mmu_notifier: fix freed page still mapped in secondary MMU"). Since hlist_for_each_entry_rcu() is changed now, we can not revert that patch directly, so this patch reverts the commit and simply fix the bug spotted by that patch This bug spotted by commit 751efd8610d3 is: There is a race condition between mmu_notifier_unregister() and __mmu_notifier_release(). Assume two tasks, one calling mmu_notifier_unregister() as a result of a filp_close() ->flush() callout (task A), and the other calling mmu_notifier_release() from an mmput() (task B). A B t1 srcu_read_lock() t2 if (!hlist_unhashed()) t3 srcu_read_unlock() t4 srcu_read_lock() t5 hlist_del_init_rcu() t6 synchronize_srcu() t7 srcu_read_unlock() t8 hlist_del_rcu() <--- NULL pointer deref. This can be fixed by using hlist_del_init_rcu instead of hlist_del_rcu. The another issue spotted in the commit is "multiple ->release() callouts", we needn't care it too much because it is really rare (e.g, can not happen on kvm since mmu-notify is unregistered after exit_mmap()) and the later call of multiple ->release should be fast since all the pages have already been released by the first call. Anyway, this issue should be fixed in a separate patch. -stable suggestions: Any version that has commit 751efd8610d3 need to be backported. I find the oldest version has this commit is 3.0-stable. [akpm@linux-foundation.org: tweak comments] Signed-off-by: Xiao Guangrong Tested-by: Robin Holt Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mmu_notifier.c | 79 +++++++++++++++++++++++++++---------------------------- 1 file changed, 39 insertions(+), 40 deletions(-) diff --git a/mm/mmu_notifier.c b/mm/mmu_notifier.c index be04122fb277..6725ff183374 100644 --- a/mm/mmu_notifier.c +++ b/mm/mmu_notifier.c @@ -40,48 +40,44 @@ void __mmu_notifier_release(struct mm_struct *mm) int id; /* - * srcu_read_lock() here will block synchronize_srcu() in - * mmu_notifier_unregister() until all registered - * ->release() callouts this function makes have - * returned. + * SRCU here will block mmu_notifier_unregister until + * ->release returns. */ id = srcu_read_lock(&srcu); + hlist_for_each_entry_rcu(mn, &mm->mmu_notifier_mm->list, hlist) + /* + * If ->release runs before mmu_notifier_unregister it must be + * handled, as it's the only way for the driver to flush all + * existing sptes and stop the driver from establishing any more + * sptes before all the pages in the mm are freed. + */ + if (mn->ops->release) + mn->ops->release(mn, mm); + srcu_read_unlock(&srcu, id); + spin_lock(&mm->mmu_notifier_mm->lock); while (unlikely(!hlist_empty(&mm->mmu_notifier_mm->list))) { mn = hlist_entry(mm->mmu_notifier_mm->list.first, struct mmu_notifier, hlist); - /* - * Unlink. This will prevent mmu_notifier_unregister() - * from also making the ->release() callout. + * We arrived before mmu_notifier_unregister so + * mmu_notifier_unregister will do nothing other than to wait + * for ->release to finish and for mmu_notifier_unregister to + * return. */ hlist_del_init_rcu(&mn->hlist); - spin_unlock(&mm->mmu_notifier_mm->lock); - - /* - * Clear sptes. (see 'release' description in mmu_notifier.h) - */ - if (mn->ops->release) - mn->ops->release(mn, mm); - - spin_lock(&mm->mmu_notifier_mm->lock); } spin_unlock(&mm->mmu_notifier_mm->lock); /* - * All callouts to ->release() which we have done are complete. - * Allow synchronize_srcu() in mmu_notifier_unregister() to complete - */ - srcu_read_unlock(&srcu, id); - - /* - * mmu_notifier_unregister() may have unlinked a notifier and may - * still be calling out to it. Additionally, other notifiers - * may have been active via vmtruncate() et. al. Block here - * to ensure that all notifier callouts for this mm have been - * completed and the sptes are really cleaned up before returning - * to exit_mmap(). + * synchronize_srcu here prevents mmu_notifier_release from returning to + * exit_mmap (which would proceed with freeing all pages in the mm) + * until the ->release method returns, if it was invoked by + * mmu_notifier_unregister. + * + * The mmu_notifier_mm can't go away from under us because one mm_count + * is held by exit_mmap. */ synchronize_srcu(&srcu); } @@ -292,31 +288,34 @@ void mmu_notifier_unregister(struct mmu_notifier *mn, struct mm_struct *mm) { BUG_ON(atomic_read(&mm->mm_count) <= 0); - spin_lock(&mm->mmu_notifier_mm->lock); if (!hlist_unhashed(&mn->hlist)) { + /* + * SRCU here will force exit_mmap to wait for ->release to + * finish before freeing the pages. + */ int id; + id = srcu_read_lock(&srcu); /* - * Ensure we synchronize up with __mmu_notifier_release(). + * exit_mmap will block in mmu_notifier_release to guarantee + * that ->release is called before freeing the pages. */ - id = srcu_read_lock(&srcu); - - hlist_del_rcu(&mn->hlist); - spin_unlock(&mm->mmu_notifier_mm->lock); - if (mn->ops->release) mn->ops->release(mn, mm); + srcu_read_unlock(&srcu, id); + spin_lock(&mm->mmu_notifier_mm->lock); /* - * Allow __mmu_notifier_release() to complete. + * Can not use list_del_rcu() since __mmu_notifier_release + * can delete it before we hold the lock. */ - srcu_read_unlock(&srcu, id); - } else + hlist_del_init_rcu(&mn->hlist); spin_unlock(&mm->mmu_notifier_mm->lock); + } /* - * Wait for any running method to finish, including ->release() if it - * was run by __mmu_notifier_release() instead of us. + * Wait for any running method to finish, of course including + * ->release if it was run by mmu_notifier_relase instead of us. */ synchronize_srcu(&srcu); -- cgit v1.2.3 From afe1bb73f8ed588ab6268c27c5a447fe0484e48f Mon Sep 17 00:00:00 2001 From: Joseph Qi Date: Fri, 24 May 2013 15:55:12 -0700 Subject: ocfs2: unlock rw lock if inode lock failed In ocfs2_file_aio_write(), it does ocfs2_rw_lock() first and then ocfs2_inode_lock(). But if ocfs2_inode_lock() failed, it goes to out_sems without unlocking rw lock. This will cause a bug in ocfs2_lock_res_free() when testing res->l_ex_holders, which is increased in __ocfs2_cluster_lock() and decreased in __ocfs2_cluster_unlock(). Signed-off-by: Joseph Qi Cc: Joel Becker Cc: Mark Fasheh Cc: Li Zefan Cc: "Duyongfeng (B)" Acked-by: Sunil Mushran Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 8a7509f9e6f5..ff54014a24ec 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -2288,7 +2288,7 @@ relock: ret = ocfs2_inode_lock(inode, NULL, 1); if (ret < 0) { mlog_errno(ret); - goto out_sems; + goto out; } ocfs2_inode_unlock(inode, 1); -- cgit v1.2.3 From 26549c8d36a64d9130e4c0f32412be7ba6180923 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 24 May 2013 15:55:13 -0700 Subject: drivers/video: implement a simple framebuffer driver A simple frame-buffer describes a raw memory region that may be rendered to, with the assumption that the display hardware has already been set up to scan out from that buffer. This is useful in cases where a bootloader exists and has set up the display hardware, but a Linux driver doesn't yet exist for the display hardware. Examples use-cases include: * The built-in LCD panels on the Samsung ARM chromebook, and Tegra devices, and likely many other ARM or embedded systems. These cannot yet be supported using a full graphics driver, since the panel control should be provided by the CDF (Common Display Framework), which has been stuck in design/review for quite some time. One could support these panels using custom SoC-specific code, but there is a desire to use common infra-structure rather than having each SoC vendor invent their own code, hence the desire to wait for CDF. * Hardware for which a full graphics driver is not yet available, and the path to obtain one upstream isn't yet clear. For example, the Raspberry Pi. * Any hardware in early stages of upstreaming, before a full graphics driver has been tackled. This driver can provide a graphical boot console (even full X support) much earlier in the upstreaming process, thus making new SoC or board support more generally useful earlier. [akpm@linux-foundation.org: make simplefb_formats[] static] Signed-off-by: Stephen Warren Cc: Arnd Bergmann Acked-by: Olof Johansson Cc: Rob Clark Cc: Florian Tobias Schandinat Cc: Tomasz Figa Cc: Laurent Pinchart Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- .../bindings/video/simple-framebuffer.txt | 25 +++ drivers/video/Kconfig | 17 ++ drivers/video/Makefile | 1 + drivers/video/simplefb.c | 234 +++++++++++++++++++++ 4 files changed, 277 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/simple-framebuffer.txt create mode 100644 drivers/video/simplefb.c diff --git a/Documentation/devicetree/bindings/video/simple-framebuffer.txt b/Documentation/devicetree/bindings/video/simple-framebuffer.txt new file mode 100644 index 000000000000..3ea460583111 --- /dev/null +++ b/Documentation/devicetree/bindings/video/simple-framebuffer.txt @@ -0,0 +1,25 @@ +Simple Framebuffer + +A simple frame-buffer describes a raw memory region that may be rendered to, +with the assumption that the display hardware has already been set up to scan +out from that buffer. + +Required properties: +- compatible: "simple-framebuffer" +- reg: Should contain the location and size of the framebuffer memory. +- width: The width of the framebuffer in pixels. +- height: The height of the framebuffer in pixels. +- stride: The number of bytes in each line of the framebuffer. +- format: The format of the framebuffer surface. Valid values are: + - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b). + +Example: + + framebuffer { + compatible = "simple-framebuffer"; + reg = <0x1d385000 (1600 * 1200 * 2)>; + width = <1600>; + height = <1200>; + stride = <(1600 * 2)>; + format = "r5g6b5"; + }; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index d71d60f94fc1..62460561077e 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2453,6 +2453,23 @@ config FB_HYPERV help This framebuffer driver supports Microsoft Hyper-V Synthetic Video. +config FB_SIMPLE + bool "Simple framebuffer support" + depends on (FB = y) && OF + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + Say Y if you want support for a simple frame-buffer. + + This driver assumes that the display hardware has been initialized + before the kernel boots, and the kernel will simply render to the + pre-allocated frame buffer surface. + + Configuration re: surface address, size, and format must be provided + through device tree, or potentially plain old platform data in the + future. + source "drivers/video/omap/Kconfig" source "drivers/video/omap2/Kconfig" source "drivers/video/exynos/Kconfig" diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 7234e4a959e8..e8bae8dd4804 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -166,6 +166,7 @@ obj-$(CONFIG_FB_MX3) += mx3fb.o obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o obj-$(CONFIG_FB_MXS) += mxsfb.o obj-$(CONFIG_FB_SSD1307) += ssd1307fb.o +obj-$(CONFIG_FB_SIMPLE) += simplefb.o # the test framebuffer is last obj-$(CONFIG_FB_VIRTUAL) += vfb.o diff --git a/drivers/video/simplefb.c b/drivers/video/simplefb.c new file mode 100644 index 000000000000..e2e9e3e61b72 --- /dev/null +++ b/drivers/video/simplefb.c @@ -0,0 +1,234 @@ +/* + * Simplest possible simple frame-buffer driver, as a platform device + * + * Copyright (c) 2013, Stephen Warren + * + * Based on q40fb.c, which was: + * Copyright (C) 2001 Richard Zidlicky + * + * Also based on offb.c, which was: + * Copyright (C) 1997 Geert Uytterhoeven + * Copyright (C) 1996 Paul Mackerras + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include + +static struct fb_fix_screeninfo simplefb_fix = { + .id = "simple", + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_TRUECOLOR, + .accel = FB_ACCEL_NONE, +}; + +static struct fb_var_screeninfo simplefb_var = { + .height = -1, + .width = -1, + .activate = FB_ACTIVATE_NOW, + .vmode = FB_VMODE_NONINTERLACED, +}; + +static int simplefb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, + u_int transp, struct fb_info *info) +{ + u32 *pal = info->pseudo_palette; + u32 cr = red >> (16 - info->var.red.length); + u32 cg = green >> (16 - info->var.green.length); + u32 cb = blue >> (16 - info->var.blue.length); + u32 value; + + if (regno >= 16) + return -EINVAL; + + value = (cr << info->var.red.offset) | + (cg << info->var.green.offset) | + (cb << info->var.blue.offset); + if (info->var.transp.length > 0) { + u32 mask = (1 << info->var.transp.length) - 1; + mask <<= info->var.transp.offset; + value |= mask; + } + pal[regno] = value; + + return 0; +} + +static struct fb_ops simplefb_ops = { + .owner = THIS_MODULE, + .fb_setcolreg = simplefb_setcolreg, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, +}; + +struct simplefb_format { + const char *name; + u32 bits_per_pixel; + struct fb_bitfield red; + struct fb_bitfield green; + struct fb_bitfield blue; + struct fb_bitfield transp; +}; + +static struct simplefb_format simplefb_formats[] = { + { "r5g6b5", 16, {11, 5}, {5, 6}, {0, 5}, {0, 0} }, +}; + +struct simplefb_params { + u32 width; + u32 height; + u32 stride; + struct simplefb_format *format; +}; + +static int simplefb_parse_dt(struct platform_device *pdev, + struct simplefb_params *params) +{ + struct device_node *np = pdev->dev.of_node; + int ret; + const char *format; + int i; + + ret = of_property_read_u32(np, "width", ¶ms->width); + if (ret) { + dev_err(&pdev->dev, "Can't parse width property\n"); + return ret; + } + + ret = of_property_read_u32(np, "height", ¶ms->height); + if (ret) { + dev_err(&pdev->dev, "Can't parse height property\n"); + return ret; + } + + ret = of_property_read_u32(np, "stride", ¶ms->stride); + if (ret) { + dev_err(&pdev->dev, "Can't parse stride property\n"); + return ret; + } + + ret = of_property_read_string(np, "format", &format); + if (ret) { + dev_err(&pdev->dev, "Can't parse format property\n"); + return ret; + } + params->format = NULL; + for (i = 0; i < ARRAY_SIZE(simplefb_formats); i++) { + if (strcmp(format, simplefb_formats[i].name)) + continue; + params->format = &simplefb_formats[i]; + break; + } + if (!params->format) { + dev_err(&pdev->dev, "Invalid format value\n"); + return -EINVAL; + } + + return 0; +} + +static int simplefb_probe(struct platform_device *pdev) +{ + int ret; + struct simplefb_params params; + struct fb_info *info; + struct resource *mem; + + if (fb_get_options("simplefb", NULL)) + return -ENODEV; + + ret = simplefb_parse_dt(pdev, ¶ms); + if (ret) + return ret; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(&pdev->dev, "No memory resource\n"); + return -EINVAL; + } + + info = framebuffer_alloc(sizeof(u32) * 16, &pdev->dev); + if (!info) + return -ENOMEM; + platform_set_drvdata(pdev, info); + + info->fix = simplefb_fix; + info->fix.smem_start = mem->start; + info->fix.smem_len = resource_size(mem); + info->fix.line_length = params.stride; + + info->var = simplefb_var; + info->var.xres = params.width; + info->var.yres = params.height; + info->var.xres_virtual = params.width; + info->var.yres_virtual = params.height; + info->var.bits_per_pixel = params.format->bits_per_pixel; + info->var.red = params.format->red; + info->var.green = params.format->green; + info->var.blue = params.format->blue; + info->var.transp = params.format->transp; + + info->fbops = &simplefb_ops; + info->flags = FBINFO_DEFAULT; + info->screen_base = devm_ioremap(&pdev->dev, info->fix.smem_start, + info->fix.smem_len); + if (!info->screen_base) { + framebuffer_release(info); + return -ENODEV; + } + info->pseudo_palette = (void *)(info + 1); + + ret = register_framebuffer(info); + if (ret < 0) { + dev_err(&pdev->dev, "Unable to register simplefb: %d\n", ret); + framebuffer_release(info); + return ret; + } + + dev_info(&pdev->dev, "fb%d: simplefb registered!\n", info->node); + + return 0; +} + +static int simplefb_remove(struct platform_device *pdev) +{ + struct fb_info *info = platform_get_drvdata(pdev); + + unregister_framebuffer(info); + framebuffer_release(info); + + return 0; +} + +static const struct of_device_id simplefb_of_match[] = { + { .compatible = "simple-framebuffer", }, + { }, +}; +MODULE_DEVICE_TABLE(of, simplefb_of_match); + +static struct platform_driver simplefb_driver = { + .driver = { + .name = "simple-framebuffer", + .owner = THIS_MODULE, + .of_match_table = simplefb_of_match, + }, + .probe = simplefb_probe, + .remove = simplefb_remove, +}; +module_platform_driver(simplefb_driver); + +MODULE_AUTHOR("Stephen Warren "); +MODULE_DESCRIPTION("Simple framebuffer driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 28ccddf7952c496df2a51ce5aee4f2a058a98bab Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Fri, 24 May 2013 15:55:15 -0700 Subject: mm: memcg: remove incorrect VM_BUG_ON for swap cache pages in uncharge Commit 0c59b89c81ea ("mm: memcg: push down PageSwapCache check into uncharge entry functions") added a VM_BUG_ON() on PageSwapCache in the uncharge path after checking that page flag once, assuming that the state is stable in all paths, but this is not the case and the condition triggers in user environments. An uncharge after the last page table reference to the page goes away can race with reclaim adding the page to swap cache. Swap cache pages are usually uncharged when they are freed after swapout, from a path that also handles swap usage accounting and memcg lifetime management. However, since the last page table reference is gone and thus no references to the swap slot left, the swap slot will be freed shortly when reclaim attempts to write the page to disk. The whole swap accounting is not even necessary. So while the race condition for which this VM_BUG_ON was added is real and actually existed all along, there are no negative effects. Remove the VM_BUG_ON again. Reported-by: Heiko Carstens Reported-by: Lingzhu Xiang Signed-off-by: Johannes Weiner Acked-by: Hugh Dickins Acked-by: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index cb1c9dedf9b6..010d6c14129a 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -4108,8 +4108,6 @@ __mem_cgroup_uncharge_common(struct page *page, enum charge_type ctype, if (mem_cgroup_disabled()) return NULL; - VM_BUG_ON(PageSwapCache(page)); - if (PageTransHuge(page)) { nr_pages <<= compound_order(page); VM_BUG_ON(!PageTransHuge(page)); @@ -4205,6 +4203,18 @@ void mem_cgroup_uncharge_page(struct page *page) if (page_mapped(page)) return; VM_BUG_ON(page->mapping && !PageAnon(page)); + /* + * If the page is in swap cache, uncharge should be deferred + * to the swap path, which also properly accounts swap usage + * and handles memcg lifetime. + * + * Note that this check is not stable and reclaim may add the + * page to swap cache at any time after this. However, if the + * page is not in swap cache by the time page->mapcount hits + * 0, there won't be any page table references to the swap + * slot, and reclaim will free it and not actually write the + * page to disk. + */ if (PageSwapCache(page)) return; __mem_cgroup_uncharge_common(page, MEM_CGROUP_CHARGE_TYPE_ANON, false); -- cgit v1.2.3 From fb09c3733a94b5f1dba50359d09c9e217c763fb9 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 24 May 2013 15:55:16 -0700 Subject: hfs: avoid crash in hfs_bnode_create Commit 634725a92938 ("hfs: cleanup HFS+ prints") removed the BUG_ON in hfs_bnode_create in hfsplus. This patch removes it from the hfs version and avoids an fsfuzzer crash. Signed-off-by: Jeff Mahoney Acked-by: Jeff Mahoney Signed-off-by: Jiri Slaby Cc: Vyacheslav Dubeyko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/hfs/bnode.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/hfs/bnode.c b/fs/hfs/bnode.c index f3b1a15ccd59..d3fa6bd9503e 100644 --- a/fs/hfs/bnode.c +++ b/fs/hfs/bnode.c @@ -415,7 +415,11 @@ struct hfs_bnode *hfs_bnode_create(struct hfs_btree *tree, u32 num) spin_lock(&tree->hash_lock); node = hfs_bnode_findhash(tree, num); spin_unlock(&tree->hash_lock); - BUG_ON(node); + if (node) { + pr_crit("new node %u already hashed?\n", num); + WARN_ON(1); + return node; + } node = __hfs_bnode_create(tree, num); if (!node) return ERR_PTR(-ENOMEM); -- cgit v1.2.3 From 1ccc819da6fda9bee10ab8b72e9adbb5ad3e4959 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 24 May 2013 15:55:17 -0700 Subject: rapidio/tsi721: fix bug in MSI interrupt handling Fix bug in MSI interrupt handling which causes loss of event notifications. Typical indication of lost MSI interrupts are stalled message and doorbell transfers between RapidIO endpoints. To avoid loss of MSI interrupts all interrupts from the device must be disabled on entering the interrupt handler routine and re-enabled when exiting it. Re-enabling device interrupts will trigger new MSI message(s) if Tsi721 registered new events since entering interrupt handler routine. This patch is applicable to kernel versions starting from v3.2. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/devices/tsi721.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 6faba406b6e9..a8b2c23a7ef4 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -471,6 +471,10 @@ static irqreturn_t tsi721_irqhandler(int irq, void *ptr) u32 intval; u32 ch_inte; + /* For MSI mode disable all device-level interrupts */ + if (priv->flags & TSI721_USING_MSI) + iowrite32(0, priv->regs + TSI721_DEV_INTE); + dev_int = ioread32(priv->regs + TSI721_DEV_INT); if (!dev_int) return IRQ_NONE; @@ -560,6 +564,14 @@ static irqreturn_t tsi721_irqhandler(int irq, void *ptr) } } #endif + + /* For MSI mode re-enable device-level interrupts */ + if (priv->flags & TSI721_USING_MSI) { + dev_int = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO | + TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH; + iowrite32(dev_int, priv->regs + TSI721_DEV_INTE); + } + return IRQ_HANDLED; } -- cgit v1.2.3 From c2cc499c5bcf9040a738f49e8051b42078205748 Mon Sep 17 00:00:00 2001 From: Leonid Yegoshin Date: Fri, 24 May 2013 15:55:18 -0700 Subject: mm compaction: fix of improper cache flush in migration code Page 'new' during MIGRATION can't be flushed with flush_cache_page(). Using flush_cache_page(vma, addr, pfn) is justified only if the page is already placed in process page table, and that is done right after flush_cache_page(). But without it the arch function has no knowledge of process PTE and does nothing. Besides that, flush_cache_page() flushes an application cache page, but the kernel has a different page virtual address and dirtied it. Replace it with flush_dcache_page(new) which is the proper usage. The old page is flushed in try_to_unmap_one() before migration. This bug takes place in Sead3 board with M14Kc MIPS CPU without cache aliasing (but Harvard arch - separate I and D cache) in tight memory environment (128MB) each 1-3days on SOAK test. It fails in cc1 during kernel build (SIGILL, SIGBUS, SIGSEG) if CONFIG_COMPACTION is switched ON. Signed-off-by: Leonid Yegoshin Cc: Leonid Yegoshin Acked-by: Rik van Riel Cc: Michal Hocko Acked-by: Mel Gorman Cc: Ralf Baechle Cc: Russell King Cc: David Miller Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/migrate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/migrate.c b/mm/migrate.c index 27ed22579fd9..b1f57501de9c 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -165,7 +165,7 @@ static int remove_migration_pte(struct page *new, struct vm_area_struct *vma, pte = arch_make_huge_pte(pte, vma, new, 0); } #endif - flush_cache_page(vma, addr, pte_pfn(pte)); + flush_dcache_page(new); set_pte_at(mm, addr, ptep, pte); if (PageHuge(new)) { -- cgit v1.2.3 From 7450231fb35492951e78a91b833fd935171f4e66 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 May 2013 15:55:20 -0700 Subject: linux/kernel.h: fix kernel-doc warning Fix kernel-doc warning in : Warning(include/linux/kernel.h:590): No description found for parameter 'ip' scripts/kernel-doc cannot handle macros, functions, or function prototypes between the function or macro that is being documented and its definition, so move these prototypes above the function that is being documented. Signed-off-by: Randy Dunlap Cc: Steven Rostedt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/linux/kernel.h b/include/linux/kernel.h index e96329ceb28c..e9ef6d6b51d5 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -562,6 +562,9 @@ int __trace_bprintk(unsigned long ip, const char *fmt, ...); extern __printf(2, 3) int __trace_printk(unsigned long ip, const char *fmt, ...); +extern int __trace_bputs(unsigned long ip, const char *str); +extern int __trace_puts(unsigned long ip, const char *str, int size); + /** * trace_puts - write a string into the ftrace buffer * @str: the string to record @@ -587,8 +590,6 @@ int __trace_printk(unsigned long ip, const char *fmt, ...); * (1 when __trace_bputs is used, strlen(str) when __trace_puts is used) */ -extern int __trace_bputs(unsigned long ip, const char *str); -extern int __trace_puts(unsigned long ip, const char *str, int size); #define trace_puts(str) ({ \ static const char *trace_printk_fmt \ __attribute__((section("__trace_printk_fmt"))) = \ -- cgit v1.2.3 From 7c3425123ddfdc5f48e7913ff59d908789712b18 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Fri, 24 May 2013 15:55:21 -0700 Subject: mm/THP: use pmd_populate() to update the pmd with pgtable_t pointer We should not use set_pmd_at to update pmd_t with pgtable_t pointer. set_pmd_at is used to set pmd with huge pte entries and architectures like ppc64, clear few flags from the pte when saving a new entry. Without this change we observe bad pte errors like below on ppc64 with THP enabled. BUG: Bad page map in process ld mm=0xc000001ee39f4780 pte:7fc3f37848000001 pmd:c000001ec0000000 Signed-off-by: Aneesh Kumar K.V Cc: Hugh Dickins Cc: Benjamin Herrenschmidt Reviewed-by: Andrea Arcangeli Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/huge_memory.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 03a89a2f464b..362c329b83fe 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -2325,7 +2325,12 @@ static void collapse_huge_page(struct mm_struct *mm, pte_unmap(pte); spin_lock(&mm->page_table_lock); BUG_ON(!pmd_none(*pmd)); - set_pmd_at(mm, address, pmd, _pmd); + /* + * We can only use set_pmd_at when establishing + * hugepmds and never for establishing regular pmds that + * points to regular pagetables. Use pmd_populate for that + */ + pmd_populate(mm, pmd, pmd_pgtable(_pmd)); spin_unlock(&mm->page_table_lock); anon_vma_unlock_write(vma->anon_vma); goto out; -- cgit v1.2.3 From 4b949b8af12e24b8a48fa5bb775a13b558d9f4da Mon Sep 17 00:00:00 2001 From: Christian Gmeiner Date: Fri, 24 May 2013 15:55:22 -0700 Subject: drivers/leds/leds-ot200.c: fix error caused by shifted mask During the development of this driver an in-house register documentation was used. The last week some integration tests were done and this problem was found. It turned out that the released register documentation is wrong. The fix is very simple: shift all masks by one. Signed-off-by: Christian Gmeiner Cc: Bryan Wu Cc: Sebastian Andrzej Siewior Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/leds-ot200.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/leds/leds-ot200.c b/drivers/leds/leds-ot200.c index ee14662ed5ce..98cae529373f 100644 --- a/drivers/leds/leds-ot200.c +++ b/drivers/leds/leds-ot200.c @@ -47,37 +47,37 @@ static struct ot200_led leds[] = { { .name = "led_1", .port = 0x49, - .mask = BIT(7), + .mask = BIT(6), }, { .name = "led_2", .port = 0x49, - .mask = BIT(6), + .mask = BIT(5), }, { .name = "led_3", .port = 0x49, - .mask = BIT(5), + .mask = BIT(4), }, { .name = "led_4", .port = 0x49, - .mask = BIT(4), + .mask = BIT(3), }, { .name = "led_5", .port = 0x49, - .mask = BIT(3), + .mask = BIT(2), }, { .name = "led_6", .port = 0x49, - .mask = BIT(2), + .mask = BIT(1), }, { .name = "led_7", .port = 0x49, - .mask = BIT(1), + .mask = BIT(0), } }; -- cgit v1.2.3 From 97c9266b11967e6401866b0111af59fa894180bf Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 24 May 2013 15:55:23 -0700 Subject: revert "selftest: add simple test for soft-dirty bit" Revert commit 58c7be84fec8 ("selftest: add simple test for soft-dirty bit"). This is the self test for Pavel's pagemap2 patches which didn't actually get merged. Reported-by: Pavel Emelyanov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- tools/testing/selftests/Makefile | 1 - tools/testing/selftests/soft-dirty/Makefile | 10 --- tools/testing/selftests/soft-dirty/soft-dirty.c | 114 ------------------------ 3 files changed, 125 deletions(-) delete mode 100644 tools/testing/selftests/soft-dirty/Makefile delete mode 100644 tools/testing/selftests/soft-dirty/soft-dirty.c diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index d4abc59ce1d9..0a63658065f0 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -6,7 +6,6 @@ TARGETS += memory-hotplug TARGETS += mqueue TARGETS += net TARGETS += ptrace -TARGETS += soft-dirty TARGETS += vm all: diff --git a/tools/testing/selftests/soft-dirty/Makefile b/tools/testing/selftests/soft-dirty/Makefile deleted file mode 100644 index a9cdc823d6e0..000000000000 --- a/tools/testing/selftests/soft-dirty/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -CFLAGS += -iquote../../../../include/uapi -Wall -soft-dirty: soft-dirty.c - -all: soft-dirty - -clean: - rm -f soft-dirty - -run_tests: all - @./soft-dirty || echo "soft-dirty selftests: [FAIL]" diff --git a/tools/testing/selftests/soft-dirty/soft-dirty.c b/tools/testing/selftests/soft-dirty/soft-dirty.c deleted file mode 100644 index aba4f87f87f0..000000000000 --- a/tools/testing/selftests/soft-dirty/soft-dirty.c +++ /dev/null @@ -1,114 +0,0 @@ -#include -#include -#include -#include -#include -#include - -typedef unsigned long long u64; - -#define PME_PRESENT (1ULL << 63) -#define PME_SOFT_DIRTY (1Ull << 55) - -#define PAGES_TO_TEST 3 -#ifndef PAGE_SIZE -#define PAGE_SIZE 4096 -#endif - -static void get_pagemap2(char *mem, u64 *map) -{ - int fd; - - fd = open("/proc/self/pagemap2", O_RDONLY); - if (fd < 0) { - perror("Can't open pagemap2"); - exit(1); - } - - lseek(fd, (unsigned long)mem / PAGE_SIZE * sizeof(u64), SEEK_SET); - read(fd, map, sizeof(u64) * PAGES_TO_TEST); - close(fd); -} - -static inline char map_p(u64 map) -{ - return map & PME_PRESENT ? 'p' : '-'; -} - -static inline char map_sd(u64 map) -{ - return map & PME_SOFT_DIRTY ? 'd' : '-'; -} - -static int check_pte(int step, int page, u64 *map, u64 want) -{ - if ((map[page] & want) != want) { - printf("Step %d Page %d has %c%c, want %c%c\n", - step, page, - map_p(map[page]), map_sd(map[page]), - map_p(want), map_sd(want)); - return 1; - } - - return 0; -} - -static void clear_refs(void) -{ - int fd; - char *v = "4"; - - fd = open("/proc/self/clear_refs", O_WRONLY); - if (write(fd, v, 3) < 3) { - perror("Can't clear soft-dirty bit"); - exit(1); - } - close(fd); -} - -int main(void) -{ - char *mem, x; - u64 map[PAGES_TO_TEST]; - - mem = mmap(NULL, PAGES_TO_TEST * PAGE_SIZE, - PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANON, 0, 0); - - x = mem[0]; - mem[2 * PAGE_SIZE] = 'c'; - get_pagemap2(mem, map); - - if (check_pte(1, 0, map, PME_PRESENT)) - return 1; - if (check_pte(1, 1, map, 0)) - return 1; - if (check_pte(1, 2, map, PME_PRESENT | PME_SOFT_DIRTY)) - return 1; - - clear_refs(); - get_pagemap2(mem, map); - - if (check_pte(2, 0, map, PME_PRESENT)) - return 1; - if (check_pte(2, 1, map, 0)) - return 1; - if (check_pte(2, 2, map, PME_PRESENT)) - return 1; - - mem[0] = 'a'; - mem[PAGE_SIZE] = 'b'; - x = mem[2 * PAGE_SIZE]; - get_pagemap2(mem, map); - - if (check_pte(3, 0, map, PME_PRESENT | PME_SOFT_DIRTY)) - return 1; - if (check_pte(3, 1, map, PME_PRESENT | PME_SOFT_DIRTY)) - return 1; - if (check_pte(3, 2, map, PME_PRESENT)) - return 1; - - (void)x; /* gcc warn */ - - printf("PASS\n"); - return 0; -} -- cgit v1.2.3 From 6900807c6b95dcb004902302b8ac5dbfbf6feb89 Mon Sep 17 00:00:00 2001 From: Jeff Moyer Date: Fri, 24 May 2013 15:55:24 -0700 Subject: aio: fix io_getevents documentation In reviewing man pages, I noticed that io_getevents is documented to update the timeout that gets passed into the library call. This doesn't happen in kernel space or in the library (even though it's documented to do so in both places). Unless there is objection, I'd like to fix the comments/docs to match the code (I will also update the man page upon consensus). Signed-off-by: Jeff Moyer Signed-off-by: Benjamin LaHaise Acked-by: Cyril Hrubis Acked-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/aio.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/aio.c b/fs/aio.c index c5b1a8c10411..3fcdd73b6f1b 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1299,8 +1299,7 @@ SYSCALL_DEFINE3(io_cancel, aio_context_t, ctx_id, struct iocb __user *, iocb, * < min_nr if the timeout specified by timeout has elapsed * before sufficient events are available, where timeout == NULL * specifies an infinite timeout. Note that the timeout pointed to by - * timeout is relative and will be updated if not NULL and the - * operation blocks. Will fail with -ENOSYS if not implemented. + * timeout is relative. Will fail with -ENOSYS if not implemented. */ SYSCALL_DEFINE5(io_getevents, aio_context_t, ctx_id, long, min_nr, -- cgit v1.2.3 From 387b8b3e37cb1c257fb607787f73815c30d22859 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 May 2013 15:55:25 -0700 Subject: auditfilter.c: fix kernel-doc warnings Fix kernel-doc warnings in kernel/auditfilter.c: Warning(kernel/auditfilter.c:1029): Excess function parameter 'loginuid' description in 'audit_receive_filter' Warning(kernel/auditfilter.c:1029): Excess function parameter 'sessionid' description in 'audit_receive_filter' Warning(kernel/auditfilter.c:1029): Excess function parameter 'sid' description in 'audit_receive_filter' Signed-off-by: Randy Dunlap Cc: Eric Paris Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/auditfilter.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index 83a2970295d1..6bd4a90d1991 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1021,9 +1021,6 @@ static void audit_log_rule_change(char *action, struct audit_krule *rule, int re * @seq: netlink audit message sequence (serial) number * @data: payload data * @datasz: size of payload data - * @loginuid: loginuid of sender - * @sessionid: sessionid for netlink audit message - * @sid: SE Linux Security ID of sender */ int audit_receive_filter(int type, int pid, int seq, void *data, size_t datasz) { -- cgit v1.2.3 From cac29af6bd6bc5c53499f39ef1eade193295b2f1 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 24 May 2013 15:55:26 -0700 Subject: drivers/rtc/rtc-pl031.c: pass correct pointer to free_irq() free_irq() expects the same pointer that was passed to request_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: @r1@ type T; T devid; @@ request_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) Signed-off-by: Lars-Peter Clausen Cc: Srinidhi Kasagar Cc: Linus Walleij Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-pl031.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index 8900ea784817..0f0609b1aa2c 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -306,7 +306,7 @@ static int pl031_remove(struct amba_device *adev) struct pl031_local *ldata = dev_get_drvdata(&adev->dev); amba_set_drvdata(adev, NULL); - free_irq(adev->irq[0], ldata->rtc); + free_irq(adev->irq[0], ldata); rtc_device_unregister(ldata->rtc); iounmap(ldata->base); kfree(ldata); -- cgit v1.2.3 From e5ee7305ae03e43dbe2b0e346232975f793ad0eb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 24 May 2013 15:55:27 -0700 Subject: fbdev: FB_GOLDFISH should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `goldfish_fb_remove': drivers/video/goldfishfb.c:301: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `goldfish_fb_probe': drivers/video/goldfishfb.c:247: undefined reference to `dma_alloc_coherent' drivers/video/goldfishfb.c:280: undefined reference to `dma_free_coherent' Signed-off-by: Geert Uytterhoeven Cc: Florian Tobias Schandinat Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 62460561077e..2e937bdace6f 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2199,7 +2199,7 @@ config FB_XILINX config FB_GOLDFISH tristate "Goldfish Framebuffer" - depends on FB + depends on FB && HAS_DMA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT -- cgit v1.2.3 From dfd20b2b174d3a9b258ea3b7a35ead33576587b1 Mon Sep 17 00:00:00 2001 From: Brian Behlendorf Date: Fri, 24 May 2013 15:55:28 -0700 Subject: drivers/block/brd.c: fix brd_lookup_page() race The index on the page must be set before it is inserted in the radix tree. Otherwise there is a small race which can occur during lookup where the page can be found with the incorrect index. This will trigger the BUG_ON() in brd_lookup_page(). Signed-off-by: Brian Behlendorf Reported-by: Chris Wedgwood Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/brd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/brd.c b/drivers/block/brd.c index f1a29f8e9d33..9bf4371755f2 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -117,13 +117,13 @@ static struct page *brd_insert_page(struct brd_device *brd, sector_t sector) spin_lock(&brd->brd_lock); idx = sector >> PAGE_SECTORS_SHIFT; + page->index = idx; if (radix_tree_insert(&brd->brd_pages, idx, page)) { __free_page(page); page = radix_tree_lookup(&brd->brd_pages, idx); BUG_ON(!page); BUG_ON(page->index != idx); - } else - page->index = idx; + } spin_unlock(&brd->brd_lock); radix_tree_preload_end(); -- cgit v1.2.3 From 136e8770cd5d1fe38b3c613100dd6dc4db6d4fa6 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Fri, 24 May 2013 15:55:29 -0700 Subject: nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary nilfs2: fix issue of nilfs_set_page_dirty for page at EOF boundary DESCRIPTION: There are use-cases when NILFS2 file system (formatted with block size lesser than 4 KB) can be remounted in RO mode because of encountering of "broken bmap" issue. The issue was reported by Anthony Doggett : "The machine I've been trialling nilfs on is running Debian Testing, Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2), but I've also reproduced it (identically) with Debian Unstable amd64 and Debian Experimental (using the 3.8-trunk kernel). The problematic partitions were formatted with "mkfs.nilfs2 -b 1024 -B 8192"." SYMPTOMS: (1) System log contains error messages likewise: [63102.496756] nilfs_direct_assign: invalid pointer: 0 [63102.496786] NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28) [63102.496798] [63102.524403] Remounting filesystem read-only (2) The NILFS2 file system is remounted in RO mode. REPRODUSING PATH: (1) Create volume group with name "unencrypted" by means of vgcreate utility. (2) Run script (prepared by Anthony Doggett ): ----------------[BEGIN SCRIPT]-------------------- VG=unencrypted lvcreate --size 2G --name ntest $VG mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest mkdir /var/tmp/n mkdir /var/tmp/n/ntest mount /dev/mapper/$VG-ntest /var/tmp/n/ntest mkdir /var/tmp/n/ntest/thedir cd /var/tmp/n/ntest/thedir sleep 2 date darcs init sleep 2 dmesg|tail -n 5 date darcs whatsnew || true date sleep 2 dmesg|tail -n 5 ----------------[END SCRIPT]-------------------- REPRODUCIBILITY: 100% INVESTIGATION: As it was discovered, the issue takes place during segment construction after executing such sequence of user-space operations: open("_darcs/index", O_RDWR|O_CREAT|O_NOCTTY, 0666) = 7 fstat(7, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 ftruncate(7, 60) The error message "NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28)" takes place because of trying to get block number for third block of the file with logical offset #3072 bytes. As it is possible to see from above output, the file has 60 bytes of the whole size. So, it is enough one block (1 KB in size) allocation for the whole file. Trying to operate with several blocks instead of one takes place because of discovering several dirty buffers for this file in nilfs_segctor_scan_file() method. The root cause of this issue is in nilfs_set_page_dirty function which is called just before writing to an mmapped page. When nilfs_page_mkwrite function handles a page at EOF boundary, it fills hole blocks only inside EOF through __block_page_mkwrite(). The __block_page_mkwrite() function calls set_page_dirty() after filling hole blocks, thus nilfs_set_page_dirty function (= a_ops->set_page_dirty) is called. However, the current implementation of nilfs_set_page_dirty() wrongly marks all buffers dirty even for page at EOF boundary. As a result, buffers outside EOF are inconsistently marked dirty and queued for write even though they are not mapped with nilfs_get_block function. FIX: This modifies nilfs_set_page_dirty() not to mark hole blocks dirty. Thanks to Vyacheslav Dubeyko for his effort on analysis and proposals for this issue. Signed-off-by: Ryusuke Konishi Reported-by: Anthony Doggett Reported-by: Vyacheslav Dubeyko Cc: Vyacheslav Dubeyko Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/nilfs2/inode.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c index 689fb608648e..bccfec8343c5 100644 --- a/fs/nilfs2/inode.c +++ b/fs/nilfs2/inode.c @@ -219,13 +219,32 @@ static int nilfs_writepage(struct page *page, struct writeback_control *wbc) static int nilfs_set_page_dirty(struct page *page) { - int ret = __set_page_dirty_buffers(page); + int ret = __set_page_dirty_nobuffers(page); - if (ret) { + if (page_has_buffers(page)) { struct inode *inode = page->mapping->host; - unsigned nr_dirty = 1 << (PAGE_SHIFT - inode->i_blkbits); + unsigned nr_dirty = 0; + struct buffer_head *bh, *head; - nilfs_set_file_dirty(inode, nr_dirty); + /* + * This page is locked by callers, and no other thread + * concurrently marks its buffers dirty since they are + * only dirtied through routines in fs/buffer.c in + * which call sites of mark_buffer_dirty are protected + * by page lock. + */ + bh = head = page_buffers(page); + do { + /* Do not mark hole blocks dirty */ + if (buffer_dirty(bh) || !buffer_mapped(bh)) + continue; + + set_buffer_dirty(bh); + nr_dirty++; + } while (bh = bh->b_this_page, bh != head); + + if (nr_dirty) + nilfs_set_file_dirty(inode, nr_dirty); } return ret; } -- cgit v1.2.3 From 348f9f05e0266822fa048f7fb3b039692a0cafbc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 May 2013 15:55:30 -0700 Subject: mm/memory_hotplug.c: fix printk format warnings Fix printk format warnings in mm/memory_hotplug.c by using "%pa": mm/memory_hotplug.c: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 2 has type 'resource_size_t' [-Wformat] mm/memory_hotplug.c: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'resource_size_t' [-Wformat] Signed-off-by: Randy Dunlap Reported-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory_hotplug.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index a221fac1f47d..1ad92b46753e 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -720,9 +720,12 @@ int __remove_pages(struct zone *zone, unsigned long phys_start_pfn, start = phys_start_pfn << PAGE_SHIFT; size = nr_pages * PAGE_SIZE; ret = release_mem_region_adjustable(&iomem_resource, start, size); - if (ret) - pr_warn("Unable to release resource <%016llx-%016llx> (%d)\n", - start, start + size - 1, ret); + if (ret) { + resource_size_t endres = start + size - 1; + + pr_warn("Unable to release resource <%pa-%pa> (%d)\n", + &start, &endres, ret); + } sections_to_remove = nr_pages / PAGES_PER_SECTION; for (i = 0; i < sections_to_remove; i++) { -- cgit v1.2.3 From 1e7e2e05c179a68aaf8830fe91547a87f4589e53 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Fri, 24 May 2013 15:55:31 -0700 Subject: drivers/char/random.c: fix priming of last_data Commit ec8f02da9ea5 ("random: prime last_data value per fips requirements") added priming of last_data per fips requirements. Unfortuantely, it did so in a way that can lead to multiple threads all incrementing nbytes, but only one actually doing anything with the extra data, which leads to some fun random corruption and panics. The fix is to simply do everything needed to prime last_data in a single shot, so there's no window for multiple cpus to increment nbytes -- in fact, we won't even increment or decrement nbytes anymore, we'll just extract the needed EXTRACT_SIZE one time per pool and then carry on with the normal routine. All these changes have been tested across multiple hosts and architectures where panics were previously encoutered. The code changes are are strictly limited to areas only touched when when booted in fips mode. This change should also go into 3.8-stable, to make the myriads of fips users on 3.8.x happy. Signed-off-by: Jarod Wilson Tested-by: Jan Stancek Tested-by: Jan Stodola Cc: Herbert Xu Acked-by: Neil Horman Cc: "David S. Miller" Cc: Matt Mackall Cc: "Theodore Ts'o" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/random.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index cd9a6211dcad..73e52b7796f9 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -957,10 +957,23 @@ static ssize_t extract_entropy(struct entropy_store *r, void *buf, { ssize_t ret = 0, i; __u8 tmp[EXTRACT_SIZE]; + unsigned long flags; /* if last_data isn't primed, we need EXTRACT_SIZE extra bytes */ - if (fips_enabled && !r->last_data_init) - nbytes += EXTRACT_SIZE; + if (fips_enabled) { + spin_lock_irqsave(&r->lock, flags); + if (!r->last_data_init) { + r->last_data_init = true; + spin_unlock_irqrestore(&r->lock, flags); + trace_extract_entropy(r->name, EXTRACT_SIZE, + r->entropy_count, _RET_IP_); + xfer_secondary_pool(r, EXTRACT_SIZE); + extract_buf(r, tmp); + spin_lock_irqsave(&r->lock, flags); + memcpy(r->last_data, tmp, EXTRACT_SIZE); + } + spin_unlock_irqrestore(&r->lock, flags); + } trace_extract_entropy(r->name, nbytes, r->entropy_count, _RET_IP_); xfer_secondary_pool(r, nbytes); @@ -970,19 +983,6 @@ static ssize_t extract_entropy(struct entropy_store *r, void *buf, extract_buf(r, tmp); if (fips_enabled) { - unsigned long flags; - - - /* prime last_data value if need be, per fips 140-2 */ - if (!r->last_data_init) { - spin_lock_irqsave(&r->lock, flags); - memcpy(r->last_data, tmp, EXTRACT_SIZE); - r->last_data_init = true; - nbytes -= EXTRACT_SIZE; - spin_unlock_irqrestore(&r->lock, flags); - extract_buf(r, tmp); - } - spin_lock_irqsave(&r->lock, flags); if (!memcmp(tmp, r->last_data, EXTRACT_SIZE)) panic("Hardware RNG duplicated output!\n"); -- cgit v1.2.3 From 10b3a32d292c21ea5b3ad5ca5975e88bb20b8d68 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 24 May 2013 15:55:33 -0700 Subject: random: fix accounting race condition with lockless irq entropy_count update Commit 902c098a3663 ("random: use lockless techniques in the interrupt path") turned IRQ path from being spinlock protected into lockless cmpxchg-retry update. That commit removed r->lock serialization between crediting entropy bits from IRQ context and accounting when extracting entropy on userspace read path, but didn't turn the r->entropy_count reads/updates in account() to use cmpxchg as well. It has been observed, that under certain circumstances this leads to read() on /dev/urandom to return 0 (EOF), as r->entropy_count gets corrupted and becomes negative, which in turn results in propagating 0 all the way from account() to the actual read() call. Convert the accounting code to be the proper lockless counterpart of what has been partially done by 902c098a3663. Signed-off-by: Jiri Kosina Cc: Theodore Ts'o Cc: Greg KH Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/random.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index 73e52b7796f9..35487e8ded59 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -865,16 +865,24 @@ static size_t account(struct entropy_store *r, size_t nbytes, int min, if (r->entropy_count / 8 < min + reserved) { nbytes = 0; } else { + int entropy_count, orig; +retry: + entropy_count = orig = ACCESS_ONCE(r->entropy_count); /* If limited, never pull more than available */ - if (r->limit && nbytes + reserved >= r->entropy_count / 8) - nbytes = r->entropy_count/8 - reserved; - - if (r->entropy_count / 8 >= nbytes + reserved) - r->entropy_count -= nbytes*8; - else - r->entropy_count = reserved; + if (r->limit && nbytes + reserved >= entropy_count / 8) + nbytes = entropy_count/8 - reserved; + + if (entropy_count / 8 >= nbytes + reserved) { + entropy_count -= nbytes*8; + if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig) + goto retry; + } else { + entropy_count = reserved; + if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig) + goto retry; + } - if (r->entropy_count < random_write_wakeup_thresh) + if (entropy_count < random_write_wakeup_thresh) wakeup_write = 1; } -- cgit v1.2.3 From b4ca2b4b577c3530e34dcfaafccb2cc680ce95d1 Mon Sep 17 00:00:00 2001 From: Joseph Qi Date: Fri, 24 May 2013 15:55:34 -0700 Subject: ocfs2: goto out_unlock if ocfs2_get_clusters_nocache() failed in ocfs2_fiemap() Last time we found there is lock/unlock bug in ocfs2_file_aio_write, and then we did a thorough search for all lock resources in ocfs2_inode_info, including rw, inode and open lockres and found this bug. My kernel version is 3.0.13, and it is also in the lastest version 3.9. In ocfs2_fiemap, once ocfs2_get_clusters_nocache failed, it should goto out_unlock instead of out, because we need release buffer head, up read alloc sem and unlock inode. Signed-off-by: Joseph Qi Reviewed-by: Jie Liu Cc: Mark Fasheh Cc: Joel Becker Acked-by: Sunil Mushran Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/extent_map.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c index 1c39efb71bab..2487116d0d33 100644 --- a/fs/ocfs2/extent_map.c +++ b/fs/ocfs2/extent_map.c @@ -790,7 +790,7 @@ int ocfs2_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, &hole_size, &rec, &is_last); if (ret) { mlog_errno(ret); - goto out; + goto out_unlock; } if (rec.e_blkno == 0ULL) { -- cgit v1.2.3 From 43c523bff7c3b47506d536c10637be8399dfd85f Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 24 May 2013 15:55:35 -0700 Subject: drivers/rtc/rtc-max8998.c: check for pdata presence before dereferencing Currently the driver can crash with a NULL pointer dereference if no pdata is provided, despite of successful registration of the MFD part. This patch fixes the problem by adding a NULL check before dereferencing the pdata pointer. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Cc: Sachin Kamat Reviewed-by: Jingoo Han Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-max8998.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-max8998.c b/drivers/rtc/rtc-max8998.c index 48b6612fae7f..d5af7baa48b5 100644 --- a/drivers/rtc/rtc-max8998.c +++ b/drivers/rtc/rtc-max8998.c @@ -285,7 +285,7 @@ static int max8998_rtc_probe(struct platform_device *pdev) info->irq, ret); dev_info(&pdev->dev, "RTC CHIP NAME: %s\n", pdev->id_entry->name); - if (pdata->rtc_delay) { + if (pdata && pdata->rtc_delay) { info->lp3974_bug_workaround = true; dev_warn(&pdev->dev, "LP3974 with RTC REGERR option." " RTC updates will be extremely slow.\n"); -- cgit v1.2.3 From a9ff785e4437c83d2179161e012f5bdfbd6381f0 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Fri, 24 May 2013 15:55:36 -0700 Subject: mm/pagewalk.c: walk_page_range should avoid VM_PFNMAP areas A panic can be caused by simply cat'ing /proc//smaps while an application has a VM_PFNMAP range. It happened in-house when a benchmarker was trying to decipher the memory layout of his program. /proc//smaps and similar walks through a user page table should not be looking at VM_PFNMAP areas. Certain tests in walk_page_range() (specifically split_huge_page_pmd()) assume that all the mapped PFN's are backed with page structures. And this is not usually true for VM_PFNMAP areas. This can result in panics on kernel page faults when attempting to address those page structures. There are a half dozen callers of walk_page_range() that walk through a task's entire page table (as N. Horiguchi pointed out). So rather than change all of them, this patch changes just walk_page_range() to ignore VM_PFNMAP areas. The logic of hugetlb_vma() is moved back into walk_page_range(), as we want to test any vma in the range. VM_PFNMAP areas are used by: - graphics memory manager gpu/drm/drm_gem.c - global reference unit sgi-gru/grufile.c - sgi special memory char/mspec.c - and probably several out-of-tree modules [akpm@linux-foundation.org: remove now-unused hugetlb_vma() stub] Signed-off-by: Cliff Wickman Reviewed-by: Naoya Horiguchi Cc: Mel Gorman Cc: Andrea Arcangeli Cc: Dave Hansen Cc: David Sterba Cc: Johannes Weiner Cc: KOSAKI Motohiro Cc: "Kirill A. Shutemov" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/pagewalk.c | 70 ++++++++++++++++++++++++++++++----------------------------- 1 file changed, 36 insertions(+), 34 deletions(-) diff --git a/mm/pagewalk.c b/mm/pagewalk.c index 35aa294656cd..5da2cbcfdbb5 100644 --- a/mm/pagewalk.c +++ b/mm/pagewalk.c @@ -127,28 +127,7 @@ static int walk_hugetlb_range(struct vm_area_struct *vma, return 0; } -static struct vm_area_struct* hugetlb_vma(unsigned long addr, struct mm_walk *walk) -{ - struct vm_area_struct *vma; - - /* We don't need vma lookup at all. */ - if (!walk->hugetlb_entry) - return NULL; - - VM_BUG_ON(!rwsem_is_locked(&walk->mm->mmap_sem)); - vma = find_vma(walk->mm, addr); - if (vma && vma->vm_start <= addr && is_vm_hugetlb_page(vma)) - return vma; - - return NULL; -} - #else /* CONFIG_HUGETLB_PAGE */ -static struct vm_area_struct* hugetlb_vma(unsigned long addr, struct mm_walk *walk) -{ - return NULL; -} - static int walk_hugetlb_range(struct vm_area_struct *vma, unsigned long addr, unsigned long end, struct mm_walk *walk) @@ -198,30 +177,53 @@ int walk_page_range(unsigned long addr, unsigned long end, if (!walk->mm) return -EINVAL; + VM_BUG_ON(!rwsem_is_locked(&walk->mm->mmap_sem)); + pgd = pgd_offset(walk->mm, addr); do { - struct vm_area_struct *vma; + struct vm_area_struct *vma = NULL; next = pgd_addr_end(addr, end); /* - * handle hugetlb vma individually because pagetable walk for - * the hugetlb page is dependent on the architecture and - * we can't handled it in the same manner as non-huge pages. + * This function was not intended to be vma based. + * But there are vma special cases to be handled: + * - hugetlb vma's + * - VM_PFNMAP vma's */ - vma = hugetlb_vma(addr, walk); + vma = find_vma(walk->mm, addr); if (vma) { - if (vma->vm_end < next) + /* + * There are no page structures backing a VM_PFNMAP + * range, so do not allow split_huge_page_pmd(). + */ + if ((vma->vm_start <= addr) && + (vma->vm_flags & VM_PFNMAP)) { next = vma->vm_end; + pgd = pgd_offset(walk->mm, next); + continue; + } /* - * Hugepage is very tightly coupled with vma, so - * walk through hugetlb entries within a given vma. + * Handle hugetlb vma individually because pagetable + * walk for the hugetlb page is dependent on the + * architecture and we can't handled it in the same + * manner as non-huge pages. */ - err = walk_hugetlb_range(vma, addr, next, walk); - if (err) - break; - pgd = pgd_offset(walk->mm, next); - continue; + if (walk->hugetlb_entry && (vma->vm_start <= addr) && + is_vm_hugetlb_page(vma)) { + if (vma->vm_end < next) + next = vma->vm_end; + /* + * Hugepage is very tightly coupled with vma, + * so walk through hugetlb entries within a + * given vma. + */ + err = walk_hugetlb_range(vma, addr, next, walk); + if (err) + break; + pgd = pgd_offset(walk->mm, next); + continue; + } } if (pgd_none_or_clear_bad(pgd)) { -- cgit v1.2.3 From 03e04f048d2774aabd126fbad84729d4ba9dc40a Mon Sep 17 00:00:00 2001 From: Benjamin LaHaise Date: Fri, 24 May 2013 15:55:38 -0700 Subject: aio: fix kioctx not being freed after cancellation at exit time The recent changes overhauling fs/aio.c introduced a bug that results in the kioctx not being freed when outstanding kiocbs are cancelled at exit_aio() time. Specifically, a kiocb that is cancelled has its completion events discarded by batch_complete_aio(), which then fails to wake up the process stuck in free_ioctx(). Fix this by modifying the wait_event() condition in free_ioctx() appropriately. This patch was tested with the cancel operation in the thread based code posted yesterday. [akpm@linux-foundation.org: fix build] Signed-off-by: Benjamin LaHaise Signed-off-by: Kent Overstreet Cc: Kent Overstreet Cc: Josh Boyer Cc: Zach Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/aio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/aio.c b/fs/aio.c index 3fcdd73b6f1b..7fe5bdee1630 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -307,7 +307,9 @@ static void free_ioctx(struct kioctx *ctx) kunmap_atomic(ring); while (atomic_read(&ctx->reqs_active) > 0) { - wait_event(ctx->wait, head != ctx->tail); + wait_event(ctx->wait, + head != ctx->tail || + atomic_read(&ctx->reqs_active) <= 0); avail = (head <= ctx->tail ? ctx->tail : ctx->nr_events) - head; -- cgit v1.2.3 From 7bb66f6e6eecdd8e10ed3a63bd28c1e9105adc79 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sat, 25 May 2013 14:04:25 +0530 Subject: ARC: lazy dcache flush broke gdb in non-aliasing configs gdbserver inserting a breakpoint ends up calling copy_user_page() for a code page. The generic version of which (non-aliasing config) didn't set the PG_arch_1 bit hence update_mmu_cache() didn't sync dcache/icache for corresponding dynamic loader code page - causing garbade to be executed. So now aliasing versions of copy_user_highpage()/clear_page() are made default. There is no significant overhead since all of special alias handling code is compiled out for non-aliasing build Signed-off-by: Vineet Gupta --- arch/arc/include/asm/page.h | 9 --------- arch/arc/mm/cache_arc700.c | 21 +++++++++++---------- 2 files changed, 11 insertions(+), 19 deletions(-) diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h index 374a35514116..ab84bf131fe1 100644 --- a/arch/arc/include/asm/page.h +++ b/arch/arc/include/asm/page.h @@ -19,13 +19,6 @@ #define clear_page(paddr) memset((paddr), 0, PAGE_SIZE) #define copy_page(to, from) memcpy((to), (from), PAGE_SIZE) -#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING - -#define clear_user_page(addr, vaddr, pg) clear_page(addr) -#define copy_user_page(vto, vfrom, vaddr, pg) copy_page(vto, vfrom) - -#else /* VIPT aliasing dcache */ - struct vm_area_struct; struct page; @@ -35,8 +28,6 @@ void copy_user_highpage(struct page *to, struct page *from, unsigned long u_vaddr, struct vm_area_struct *vma); void clear_user_page(void *to, unsigned long u_vaddr, struct page *page); -#endif /* CONFIG_ARC_CACHE_VIPT_ALIASING */ - #undef STRICT_MM_TYPECHECKS #ifdef STRICT_MM_TYPECHECKS diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index d4b7bb616840..aedce1905441 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -676,6 +676,17 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, flush_cache_all(); } +void flush_anon_page(struct vm_area_struct *vma, struct page *page, + unsigned long u_vaddr) +{ + /* TBD: do we really need to clear the kernel mapping */ + __flush_dcache_page(page_address(page), u_vaddr); + __flush_dcache_page(page_address(page), page_address(page)); + +} + +#endif + void copy_user_highpage(struct page *to, struct page *from, unsigned long u_vaddr, struct vm_area_struct *vma) { @@ -725,16 +736,6 @@ void clear_user_page(void *to, unsigned long u_vaddr, struct page *page) set_bit(PG_arch_1, &page->flags); } -void flush_anon_page(struct vm_area_struct *vma, struct page *page, - unsigned long u_vaddr) -{ - /* TBD: do we really need to clear the kernel mapping */ - __flush_dcache_page(page_address(page), u_vaddr); - __flush_dcache_page(page_address(page), page_address(page)); - -} - -#endif /********************************************************************** * Explicit Cache flush request from user space via syscall -- cgit v1.2.3 From 6b3f7b5c2221c7a4fe715ea4fd479b6d07bbcbb5 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Sat, 25 May 2013 12:54:08 -0400 Subject: score: remove redundant kcore_list entries kcore_vmalloc is in fs/proc/kcore.c and kcore_mem is unused across the tree. Noticed while grepping the tree for some other kcore stuff. (score looks pretty unmaintained to me.) Signed-off-by: Kyle McMartin Signed-off-by: Linus Torvalds --- arch/score/mm/init.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/score/mm/init.c b/arch/score/mm/init.c index d8f988a37d16..0940682ab38b 100644 --- a/arch/score/mm/init.c +++ b/arch/score/mm/init.c @@ -41,8 +41,6 @@ unsigned long empty_zero_page; EXPORT_SYMBOL_GPL(empty_zero_page); -static struct kcore_list kcore_mem, kcore_vmalloc; - static void setup_zero_page(void) { struct page *page; -- cgit v1.2.3 From ab465df9dda42a997f7537c875127eeb6a88158c Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Sun, 26 May 2013 11:08:52 +0200 Subject: ipc/sem.c: Fix missing wakeups in do_smart_update_queue() do_smart_update_queue() is called when an operation (semop, semctl(SETVAL), semctl(SETALL), ...) modified the array. It must check which of the sleeping tasks can proceed. do_smart_update_queue() missed a few wakeups: - if a sleeping complex op was completed, then all per-semaphore queues must be scanned - not only those that were modified by *sops - if a sleeping simple op proceeded, then the global queue must be scanned again And: - the test for "|sops == NULL) before scanning the global queue is not required: If the global queue is empty, then it doesn't need to be scanned - regardless of the reason for calling do_smart_update_queue() The patch is not optimized, i.e. even completing a wait-for-zero operation causes a rescan. This is done to keep the patch as simple as possible. Signed-off-by: Manfred Spraul Acked-by: Davidlohr Bueso Cc: Rik van Riel Cc: Andrew Morton Signed-off-by: Linus Torvalds --- ipc/sem.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-) diff --git a/ipc/sem.c b/ipc/sem.c index a7e40ed8a076..70480a3aa698 100644 --- a/ipc/sem.c +++ b/ipc/sem.c @@ -752,19 +752,29 @@ static void do_smart_update(struct sem_array *sma, struct sembuf *sops, int nsop int otime, struct list_head *pt) { int i; + int progress; - if (sma->complex_count || sops == NULL) { - if (update_queue(sma, -1, pt)) + progress = 1; +retry_global: + if (sma->complex_count) { + if (update_queue(sma, -1, pt)) { + progress = 1; otime = 1; + sops = NULL; + } } + if (!progress) + goto done; if (!sops) { /* No semops; something special is going on. */ for (i = 0; i < sma->sem_nsems; i++) { - if (update_queue(sma, i, pt)) + if (update_queue(sma, i, pt)) { otime = 1; + progress = 1; + } } - goto done; + goto done_checkretry; } /* Check the semaphores that were modified. */ @@ -772,8 +782,15 @@ static void do_smart_update(struct sem_array *sma, struct sembuf *sops, int nsop if (sops[i].sem_op > 0 || (sops[i].sem_op < 0 && sma->sem_base[sops[i].sem_num].semval == 0)) - if (update_queue(sma, sops[i].sem_num, pt)) + if (update_queue(sma, sops[i].sem_num, pt)) { otime = 1; + progress = 1; + } + } +done_checkretry: + if (progress) { + progress = 0; + goto retry_global; } done: if (otime) -- cgit v1.2.3 From e4aa937ec75df0eea0bee03bffa3303ad36c986b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 26 May 2013 16:00:47 -0700 Subject: Linux 3.10-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 93875f5122a3..73e20dba55c1 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Unicycling Gorilla # *DOCUMENTATION* -- cgit v1.2.3