From 81f280e22f14d6d976620acaa1b346a90f4e1adc Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Sat, 12 Nov 2005 14:22:11 +0000 Subject: [PATCH] USB: pxa27x OHCI - Separate platform code from main driver To allow multiple platforms to use the PXA27x OHCI driver, the platform code needs to be moved into the board specific files in arch/arm/mach-pxa. This patch does this for mainstone and adds preliminary hooks to allow other boards to use the driver. This has been compile tested for mainstone and successfully run on Spitz (Sharp Zaurus SL-C3000) with the addition of an appropriate board support file. Signed-off-by: Richard Purdie Signed-off-by: Nicolas Pitre Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-pxa/mainstone.c | 21 ++++++++++ arch/arm/mach-pxa/pxa27x.c | 6 +++ drivers/usb/host/ohci-pxa27x.c | 85 +++++++++++++++++++++-------------------- include/asm-arm/arch-pxa/ohci.h | 18 +++++++++ 4 files changed, 88 insertions(+), 42 deletions(-) create mode 100644 include/asm-arm/arch-pxa/ohci.h diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 07892f4012d8..277498ae5b6c 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -43,6 +43,7 @@ #include #include #include +#include #include "generic.h" @@ -393,6 +394,25 @@ static struct platform_device *platform_devices[] __initdata = { &mst_flash_device[1], }; +static int mainstone_ohci_init(struct device *dev) +{ + /* setup Port1 GPIO pin. */ + pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ + pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ + + /* Set the Power Control Polarity Low and Power Sense + Polarity Low to active low. */ + UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & + ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); + + return 0; +} + +static struct pxaohci_platform_data mainstone_ohci_platform_data = { + .port_mode = PMM_PERPORT_MODE, + .init = mainstone_ohci_init, +}; + static void __init mainstone_init(void) { int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */ @@ -424,6 +444,7 @@ static void __init mainstone_init(void) pxa_set_mci_info(&mainstone_mci_platform_data); pxa_set_ficp_info(&mainstone_ficp_platform_data); + pxa_set_ohci_info(&mainstone_ohci_platform_data); } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index c722a9a91fcc..b41b1efaa2cf 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "generic.h" @@ -194,6 +195,11 @@ static struct platform_device ohci_device = { .resource = pxa27x_ohci_resources, }; +void __init pxa_set_ohci_info(struct pxaohci_platform_data *info) +{ + ohci_device.dev.platform_data = info; +} + static struct platform_device *devices[] __initdata = { &ohci_device, }; diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 9d65ec307990..c165d1ebed5c 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -26,18 +26,12 @@ #include #include #include - - -#define PMM_NPS_MODE 1 -#define PMM_GLOBAL_MODE 2 -#define PMM_PERPORT_MODE 3 +#include #define PXA_UHC_MAX_PORTNUM 3 #define UHCRHPS(x) __REG2( 0x4C000050, (x)<<2 ) -static int pxa27x_ohci_pmm_state; - /* PMM_NPS_MODE -- PMM Non-power switching mode Ports are powered continuously. @@ -50,8 +44,6 @@ static int pxa27x_ohci_pmm_state; */ static int pxa27x_ohci_select_pmm( int mode ) { - pxa27x_ohci_pmm_state = mode; - switch ( mode ) { case PMM_NPS_MODE: UHCRHDA |= RH_A_NPS; @@ -71,7 +63,6 @@ static int pxa27x_ohci_select_pmm( int mode ) "Invalid mode %d, set to non-power switch mode.\n", mode ); - pxa27x_ohci_pmm_state = PMM_NPS_MODE; UHCRHDA |= RH_A_NPS; } @@ -82,8 +73,13 @@ extern int usb_disabled(void); /*-------------------------------------------------------------------------*/ -static void pxa27x_start_hc(struct platform_device *dev) +static int pxa27x_start_hc(struct device *dev) { + int retval = 0; + struct pxaohci_platform_data *inf; + + inf = dev->platform_data; + pxa_set_cken(CKEN10_USBHOST, 1); UHCHR |= UHCHR_FHR; @@ -94,21 +90,11 @@ static void pxa27x_start_hc(struct platform_device *dev) while (UHCHR & UHCHR_FSBIR) cpu_relax(); - /* This could be properly abstracted away through the - device data the day more machines are supported and - their differences can be figured out correctly. */ - if (machine_is_mainstone()) { - /* setup Port1 GPIO pin. */ - pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ - pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ - - /* Set the Power Control Polarity Low and Power Sense - Polarity Low to active low. Supply power to USB ports. */ - UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & - ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); + if (inf->init) + retval = inf->init(dev); - pxa27x_ohci_pmm_state = PMM_PERPORT_MODE; - } + if (retval < 0) + return retval; UHCHR &= ~UHCHR_SSE; @@ -117,10 +103,19 @@ static void pxa27x_start_hc(struct platform_device *dev) /* Clear any OTG Pin Hold */ if (PSSR & PSSR_OTGPH) PSSR |= PSSR_OTGPH; + + return 0; } -static void pxa27x_stop_hc(struct platform_device *dev) +static void pxa27x_stop_hc(struct device *dev) { + struct pxaohci_platform_data *inf; + + inf = dev->platform_data; + + if (inf->exit) + inf->exit(dev); + UHCHR |= UHCHR_FHR; udelay(11); UHCHR &= ~UHCHR_FHR; @@ -147,22 +142,27 @@ static void pxa27x_stop_hc(struct platform_device *dev) * through the hotplug entry's driver_data. * */ -int usb_hcd_pxa27x_probe (const struct hc_driver *driver, - struct platform_device *dev) +int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device *pdev) { int retval; struct usb_hcd *hcd; + struct pxaohci_platform_data *inf; + + inf = pdev->dev.platform_data; - if (dev->resource[1].flags != IORESOURCE_IRQ) { + if (!inf) + return -ENODEV; + + if (pdev->resource[1].flags != IORESOURCE_IRQ) { pr_debug ("resource[1] is not IORESOURCE_IRQ"); return -ENOMEM; } - hcd = usb_create_hcd (driver, &dev->dev, "pxa27x"); + hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x"); if (!hcd) return -ENOMEM; - hcd->rsrc_start = dev->resource[0].start; - hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1; + hcd->rsrc_start = pdev->resource[0].start; + hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { pr_debug("request_mem_region failed"); @@ -177,18 +177,22 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, goto err2; } - pxa27x_start_hc(dev); + if ((retval = pxa27x_start_hc(&pdev->dev)) < 0) { + pr_debug("pxa27x_start_hc failed"); + goto err3; + } /* Select Power Management Mode */ - pxa27x_ohci_select_pmm(pxa27x_ohci_pmm_state); + pxa27x_ohci_select_pmm(inf->port_mode); ohci_hcd_init(hcd_to_ohci(hcd)); - retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT); + retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT); if (retval == 0) return retval; - pxa27x_stop_hc(dev); + pxa27x_stop_hc(&pdev->dev); + err3: iounmap(hcd->regs); err2: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); @@ -211,10 +215,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, * context, normally "rmmod", "apmd", or something similar. * */ -void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *dev) +void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev) { usb_remove_hcd(hcd); - pxa27x_stop_hc(dev); + pxa27x_stop_hc(&pdev->dev); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); @@ -292,15 +296,12 @@ static const struct hc_driver ohci_pxa27x_hc_driver = { static int ohci_hcd_pxa27x_drv_probe(struct platform_device *pdev) { - int ret; - pr_debug ("In ohci_hcd_pxa27x_drv_probe"); if (usb_disabled()) return -ENODEV; - ret = usb_hcd_pxa27x_probe(&ohci_pxa27x_hc_driver, pdev); - return ret; + return usb_hcd_pxa27x_probe(&ohci_pxa27x_hc_driver, pdev); } static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev) diff --git a/include/asm-arm/arch-pxa/ohci.h b/include/asm-arm/arch-pxa/ohci.h new file mode 100644 index 000000000000..7da89569061e --- /dev/null +++ b/include/asm-arm/arch-pxa/ohci.h @@ -0,0 +1,18 @@ +#ifndef ASMARM_ARCH_OHCI_H +#define ASMARM_ARCH_OHCI_H + +struct device; + +struct pxaohci_platform_data { + int (*init)(struct device *); + void (*exit)(struct device *); + + int port_mode; +#define PMM_NPS_MODE 1 +#define PMM_GLOBAL_MODE 2 +#define PMM_PERPORT_MODE 3 +}; + +extern void pxa_set_ohci_info(struct pxaohci_platform_data *info); + +#endif -- cgit v1.2.3 From 2e1dcc1600c1d83b26479edd076866595bbd3523 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Sat, 12 Nov 2005 14:22:14 +0000 Subject: [PATCH] USB: Add pxa27x OHCI PM functions Add power management functions for the pxa27x USB OHCI host controller. This is a totally rewritten version of the patch by Nicolas Pitre and Todd Poynor which accounts for recent USB changes. Signed-off-by: Richard Purdie Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-pxa27x.c | 33 +++++++++++++++++++++++++++------ 1 file changed, 27 insertions(+), 6 deletions(-) diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index c165d1ebed5c..3b1cfe939483 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -312,28 +312,49 @@ static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev) return 0; } -static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *dev, pm_message_t state) +#ifdef CONFIG_PM +static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state) { -// struct usb_hcd *hcd = platform_get_drvdata(dev); - printk("%s: not implemented yet\n", __FUNCTION__); + struct ohci_hcd *ohci = platform_get_drvdata(pdev); + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + pxa27x_stop_hc(&pdev->dev); + ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED; + pdev->dev.power.power_state = PMSG_SUSPEND; return 0; } -static int ohci_hcd_pxa27x_drv_resume(struct platform_device *dev) +static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev) { -// struct usb_hcd *hcd = platform_get_drvdata(dev); - printk("%s: not implemented yet\n", __FUNCTION__); + struct ohci_hcd *ohci = platform_get_drvdata(pdev); + int status; + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + if ((status = pxa27x_start_hc(&pdev->dev)) < 0) + return status; + + pdev->dev.power.power_state = PMSG_ON; + usb_hcd_resume_root_hub(platform_get_drvdata(pdev)); return 0; } +#endif static struct platform_driver ohci_hcd_pxa27x_driver = { .probe = ohci_hcd_pxa27x_drv_probe, .remove = ohci_hcd_pxa27x_drv_remove, +#ifdef CONFIG_PM .suspend = ohci_hcd_pxa27x_drv_suspend, .resume = ohci_hcd_pxa27x_drv_resume, +#endif .driver = { .name = "pxa27x-ohci", }, -- cgit v1.2.3 From 61a87adf2e7b410da8e41799c61c21a7b8c8b001 Mon Sep 17 00:00:00 2001 From: David Kubicek Date: Tue, 1 Nov 2005 18:51:34 +0100 Subject: [PATCH] USB: Converting cdc acm to a ring queue this patch by David converts the sending queue of the CDC ACM driver to a queue of URBs. This is needed for quicker devices. Please apply. Signed-Off-By: Oliver Neukum Signed-off-by: Greg Kroah-Hartman drivers/usb/class/cdc-acm.c | 229 ++++++++++++++++++++++++++++++-------------- drivers/usb/class/cdc-acm.h | 33 +++++- 2 files changed, 185 insertions(+), 77 deletions(-) --- drivers/usb/class/cdc-acm.c | 227 ++++++++++++++++++++++++++++++-------------- drivers/usb/class/cdc-acm.h | 33 ++++++- 2 files changed, 184 insertions(+), 76 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 1b4751412970..72936dc15ec9 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -6,6 +6,7 @@ * Copyright (c) 1999 Johannes Erdfelt * Copyright (c) 2000 Vojtech Pavlik * Copyright (c) 2004 Oliver Neukum + * Copyright (c) 2005 David Kubicek * * USB Abstract Control Model driver for USB modems and ISDN adapters * @@ -29,6 +30,7 @@ * config we want, sysadmin changes bConfigurationValue in sysfs. * v0.23 - use softirq for rx processing, as needed by tty layer * v0.24 - change probe method to evaluate CDC union descriptor + * v0.25 - downstream tasks paralelized to maximize throughput */ /* @@ -63,14 +65,15 @@ #include #include #include +#include #include "cdc-acm.h" /* * Version Information */ -#define DRIVER_VERSION "v0.23" -#define DRIVER_AUTHOR "Armin Fuerst, Pavel Machek, Johannes Erdfelt, Vojtech Pavlik" +#define DRIVER_VERSION "v0.25" +#define DRIVER_AUTHOR "Armin Fuerst, Pavel Machek, Johannes Erdfelt, Vojtech Pavlik, David Kubicek" #define DRIVER_DESC "USB Abstract Control Model driver for USB modems and ISDN adapters" static struct usb_driver acm_driver; @@ -284,7 +287,9 @@ exit: /* data interface returns incoming bytes, or we got unthrottled */ static void acm_read_bulk(struct urb *urb, struct pt_regs *regs) { - struct acm *acm = urb->context; + struct acm_rb *buf; + struct acm_ru *rcv = urb->context; + struct acm *acm = rcv->instance; dbg("Entering acm_read_bulk with status %d\n", urb->status); if (!ACM_READY(acm)) @@ -293,49 +298,109 @@ static void acm_read_bulk(struct urb *urb, struct pt_regs *regs) if (urb->status) dev_dbg(&acm->data->dev, "bulk rx status %d\n", urb->status); - /* calling tty_flip_buffer_push() in_irq() isn't allowed */ - tasklet_schedule(&acm->bh); + buf = rcv->buffer; + buf->size = urb->actual_length; + + spin_lock(&acm->read_lock); + list_add_tail(&rcv->list, &acm->spare_read_urbs); + list_add_tail(&buf->list, &acm->filled_read_bufs); + spin_unlock(&acm->read_lock); + + tasklet_schedule(&acm->urb_task); } static void acm_rx_tasklet(unsigned long _acm) { struct acm *acm = (void *)_acm; - struct urb *urb = acm->readurb; + struct acm_rb *buf; struct tty_struct *tty = acm->tty; - unsigned char *data = urb->transfer_buffer; + struct acm_ru *rcv; + //unsigned long flags; int i = 0; dbg("Entering acm_rx_tasklet"); - if (urb->actual_length > 0 && !acm->throttle) { - for (i = 0; i < urb->actual_length && !acm->throttle; i++) { - /* if we insert more than TTY_FLIPBUF_SIZE characters, - * we drop them. */ - if (tty->flip.count >= TTY_FLIPBUF_SIZE) { - tty_flip_buffer_push(tty); - } - tty_insert_flip_char(tty, data[i], 0); - } - dbg("Handed %d bytes to tty layer", i+1); - tty_flip_buffer_push(tty); + if (!ACM_READY(acm) || acm->throttle) + return; + +next_buffer: + spin_lock(&acm->read_lock); + if (list_empty(&acm->filled_read_bufs)) { + spin_unlock(&acm->read_lock); + goto urbs; } + buf = list_entry(acm->filled_read_bufs.next, + struct acm_rb, list); + list_del(&buf->list); + spin_unlock(&acm->read_lock); + + dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d\n", buf, buf->size); + + for (i = 0; i < buf->size && !acm->throttle; i++) { + /* if we insert more than TTY_FLIPBUF_SIZE characters, + we drop them. */ + if (tty->flip.count >= TTY_FLIPBUF_SIZE) { + tty_flip_buffer_push(tty); + } + tty_insert_flip_char(tty, buf->base[i], 0); + } + tty_flip_buffer_push(tty); spin_lock(&acm->throttle_lock); if (acm->throttle) { dbg("Throtteling noticed"); - memmove(data, data + i, urb->actual_length - i); - urb->actual_length -= i; - acm->resubmit_to_unthrottle = 1; + memmove(buf->base, buf->base + i, buf->size - i); + buf->size -= i; spin_unlock(&acm->throttle_lock); + spin_lock(&acm->read_lock); + list_add(&buf->list, &acm->filled_read_bufs); + spin_unlock(&acm->read_lock); return; } spin_unlock(&acm->throttle_lock); - urb->actual_length = 0; - urb->dev = acm->dev; - - i = usb_submit_urb(urb, GFP_ATOMIC); - if (i) - dev_dbg(&acm->data->dev, "bulk rx resubmit %d\n", i); + spin_lock(&acm->read_lock); + list_add(&buf->list, &acm->spare_read_bufs); + spin_unlock(&acm->read_lock); + goto next_buffer; + +urbs: + while (!list_empty(&acm->spare_read_bufs)) { + spin_lock(&acm->read_lock); + if (list_empty(&acm->spare_read_urbs)) { + spin_unlock(&acm->read_lock); + return; + } + rcv = list_entry(acm->spare_read_urbs.next, + struct acm_ru, list); + list_del(&rcv->list); + spin_unlock(&acm->read_lock); + + buf = list_entry(acm->spare_read_bufs.next, + struct acm_rb, list); + list_del(&buf->list); + + rcv->buffer = buf; + + usb_fill_bulk_urb(rcv->urb, acm->dev, + acm->rx_endpoint, + buf->base, + acm->readsize, + acm_read_bulk, rcv); + rcv->urb->transfer_dma = buf->dma; + rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p\n", rcv->urb, rcv, buf); + + /* This shouldn't kill the driver as unsuccessful URBs are returned to the + free-urbs-pool and resubmited ASAP */ + if (usb_submit_urb(rcv->urb, GFP_ATOMIC) < 0) { + list_add(&buf->list, &acm->spare_read_bufs); + spin_lock(&acm->read_lock); + list_add(&rcv->list, &acm->spare_read_urbs); + spin_unlock(&acm->read_lock); + return; + } + } } /* data interface wrote those outgoing bytes */ @@ -369,6 +434,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) { struct acm *acm; int rv = -EINVAL; + int i; dbg("Entering acm_tty_open.\n"); down(&open_sem); @@ -382,7 +448,9 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) tty->driver_data = acm; acm->tty = tty; - + /* force low_latency on so that our tty_push actually forces the data through, + otherwise it is scheduled, and with high data rates data can get lost. */ + tty->low_latency = 1; if (acm->used++) { goto done; @@ -394,18 +462,20 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) goto bail_out; } - acm->readurb->dev = acm->dev; - if (usb_submit_urb(acm->readurb, GFP_KERNEL)) { - dbg("usb_submit_urb(read bulk) failed"); - goto bail_out_and_unlink; - } - if (0 > acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS)) goto full_bailout; - /* force low_latency on so that our tty_push actually forces the data through, - otherwise it is scheduled, and with high data rates data can get lost. */ - tty->low_latency = 1; + INIT_LIST_HEAD(&acm->spare_read_urbs); + INIT_LIST_HEAD(&acm->spare_read_bufs); + INIT_LIST_HEAD(&acm->filled_read_bufs); + for (i = 0; i < ACM_NRU; i++) { + list_add(&(acm->ru[i].list), &acm->spare_read_urbs); + } + for (i = 0; i < ACM_NRB; i++) { + list_add(&(acm->rb[i].list), &acm->spare_read_bufs); + } + + tasklet_schedule(&acm->urb_task); done: err_out: @@ -413,8 +483,6 @@ err_out: return rv; full_bailout: - usb_kill_urb(acm->readurb); -bail_out_and_unlink: usb_kill_urb(acm->ctrlurb); bail_out: acm->used--; @@ -424,18 +492,22 @@ bail_out: static void acm_tty_unregister(struct acm *acm) { + int i; + tty_unregister_device(acm_tty_driver, acm->minor); usb_put_intf(acm->control); acm_table[acm->minor] = NULL; usb_free_urb(acm->ctrlurb); - usb_free_urb(acm->readurb); usb_free_urb(acm->writeurb); + for (i = 0; i < ACM_NRU; i++) + usb_free_urb(acm->ru[i].urb); kfree(acm); } static void acm_tty_close(struct tty_struct *tty, struct file *filp) { struct acm *acm = tty->driver_data; + int i; if (!acm || !acm->used) return; @@ -446,7 +518,8 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) acm_set_control(acm, acm->ctrlout = 0); usb_kill_urb(acm->ctrlurb); usb_kill_urb(acm->writeurb); - usb_kill_urb(acm->readurb); + for (i = 0; i < ACM_NRU; i++) + usb_kill_urb(acm->ru[i].urb); } else acm_tty_unregister(acm); } @@ -528,10 +601,7 @@ static void acm_tty_unthrottle(struct tty_struct *tty) spin_lock_bh(&acm->throttle_lock); acm->throttle = 0; spin_unlock_bh(&acm->throttle_lock); - if (acm->resubmit_to_unthrottle) { - acm->resubmit_to_unthrottle = 0; - acm_read_bulk(acm->readurb, NULL); - } + tasklet_schedule(&acm->urb_task); } static void acm_tty_break_ctl(struct tty_struct *tty, int state) @@ -694,6 +764,7 @@ static int acm_probe (struct usb_interface *intf, int call_interface_num = -1; int data_interface_num; unsigned long quirks; + int i; /* handle quirks deadly to normal probing*/ quirks = (unsigned long)id->driver_info; @@ -833,7 +904,7 @@ skip_normal_probe: } ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize); - readsize = le16_to_cpu(epread->wMaxPacketSize); + readsize = le16_to_cpu(epread->wMaxPacketSize)*2; acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize); acm->control = control_interface; acm->data = data_interface; @@ -842,12 +913,14 @@ skip_normal_probe: acm->ctrl_caps = ac_management_function; acm->ctrlsize = ctrlsize; acm->readsize = readsize; - acm->bh.func = acm_rx_tasklet; - acm->bh.data = (unsigned long) acm; + acm->urb_task.func = acm_rx_tasklet; + acm->urb_task.data = (unsigned long) acm; INIT_WORK(&acm->work, acm_softint, acm); spin_lock_init(&acm->throttle_lock); spin_lock_init(&acm->write_lock); + spin_lock_init(&acm->read_lock); acm->write_ready = 1; + acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress); buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma); if (!buf) { @@ -856,13 +929,6 @@ skip_normal_probe: } acm->ctrl_buffer = buf; - buf = usb_buffer_alloc(usb_dev, readsize, GFP_KERNEL, &acm->read_dma); - if (!buf) { - dev_dbg(&intf->dev, "out of memory (read buffer alloc)\n"); - goto alloc_fail3; - } - acm->read_buffer = buf; - if (acm_write_buffers_alloc(acm) < 0) { dev_dbg(&intf->dev, "out of memory (write buffer alloc)\n"); goto alloc_fail4; @@ -873,10 +939,25 @@ skip_normal_probe: dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)\n"); goto alloc_fail5; } - acm->readurb = usb_alloc_urb(0, GFP_KERNEL); - if (!acm->readurb) { - dev_dbg(&intf->dev, "out of memory (readurb kmalloc)\n"); - goto alloc_fail6; + for (i = 0; i < ACM_NRU; i++) { + struct acm_ru *rcv = &(acm->ru[i]); + + if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) { + dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n"); + goto alloc_fail7; + } + + rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + rcv->instance = acm; + } + for (i = 0; i < ACM_NRB; i++) { + struct acm_rb *buf = &(acm->rb[i]); + + // Using usb_buffer_alloc instead of kmalloc as Oliver suggested + if (!(buf->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &buf->dma))) { + dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n"); + goto alloc_fail7; + } } acm->writeurb = usb_alloc_urb(0, GFP_KERNEL); if (!acm->writeurb) { @@ -889,15 +970,9 @@ skip_normal_probe: acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; acm->ctrlurb->transfer_dma = acm->ctrl_dma; - usb_fill_bulk_urb(acm->readurb, usb_dev, usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress), - acm->read_buffer, readsize, acm_read_bulk, acm); - acm->readurb->transfer_flags |= URB_NO_FSBR | URB_NO_TRANSFER_DMA_MAP; - acm->readurb->transfer_dma = acm->read_dma; - usb_fill_bulk_urb(acm->writeurb, usb_dev, usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress), NULL, acm->writesize, acm_write_bulk, acm); acm->writeurb->transfer_flags |= URB_NO_FSBR | URB_NO_TRANSFER_DMA_MAP; - /* acm->writeurb->transfer_dma = 0; */ dev_info(&intf->dev, "ttyACM%d: USB ACM device\n", minor); @@ -917,14 +992,14 @@ skip_normal_probe: return 0; alloc_fail7: - usb_free_urb(acm->readurb); -alloc_fail6: + for (i = 0; i < ACM_NRB; i++) + usb_buffer_free(usb_dev, acm->readsize, acm->rb[i].base, acm->rb[i].dma); + for (i = 0; i < ACM_NRU; i++) + usb_free_urb(acm->ru[i].urb); usb_free_urb(acm->ctrlurb); alloc_fail5: acm_write_buffers_free(acm); alloc_fail4: - usb_buffer_free(usb_dev, readsize, acm->read_buffer, acm->read_dma); -alloc_fail3: usb_buffer_free(usb_dev, ctrlsize, acm->ctrl_buffer, acm->ctrl_dma); alloc_fail2: kfree(acm); @@ -936,6 +1011,7 @@ static void acm_disconnect(struct usb_interface *intf) { struct acm *acm = usb_get_intfdata (intf); struct usb_device *usb_dev = interface_to_usbdev(intf); + int i; if (!acm || !acm->dev) { dbg("disconnect on nonexisting interface"); @@ -946,15 +1022,24 @@ static void acm_disconnect(struct usb_interface *intf) acm->dev = NULL; usb_set_intfdata (intf, NULL); + tasklet_disable(&acm->urb_task); + usb_kill_urb(acm->ctrlurb); - usb_kill_urb(acm->readurb); usb_kill_urb(acm->writeurb); + for (i = 0; i < ACM_NRU; i++) + usb_kill_urb(acm->ru[i].urb); + + INIT_LIST_HEAD(&acm->filled_read_bufs); + INIT_LIST_HEAD(&acm->spare_read_bufs); + + tasklet_enable(&acm->urb_task); flush_scheduled_work(); /* wait for acm_softint */ acm_write_buffers_free(acm); - usb_buffer_free(usb_dev, acm->readsize, acm->read_buffer, acm->read_dma); usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer, acm->ctrl_dma); + for (i = 0; i < ACM_NRB; i++) + usb_buffer_free(usb_dev, acm->readsize, acm->rb[i].base, acm->rb[i].dma); usb_driver_release_interface(&acm_driver, acm->data); diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index 963a5dfd2096..fd2aaccdcbac 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -59,6 +59,9 @@ * when processing onlcr, so we only need 2 buffers. */ #define ACM_NWB 2 +#define ACM_NRU 16 +#define ACM_NRB 16 + struct acm_wb { unsigned char *buf; dma_addr_t dmah; @@ -66,22 +69,43 @@ struct acm_wb { int use; }; +struct acm_rb { + struct list_head list; + int size; + unsigned char *base; + dma_addr_t dma; +}; + +struct acm_ru { + struct list_head list; + struct acm_rb *buffer; + struct urb *urb; + struct acm *instance; +}; + struct acm { struct usb_device *dev; /* the corresponding usb device */ struct usb_interface *control; /* control interface */ struct usb_interface *data; /* data interface */ struct tty_struct *tty; /* the corresponding tty */ - struct urb *ctrlurb, *readurb, *writeurb; /* urbs */ - u8 *ctrl_buffer, *read_buffer; /* buffers of urbs */ - dma_addr_t ctrl_dma, read_dma; /* dma handles of buffers */ + struct urb *ctrlurb, *writeurb; /* urbs */ + u8 *ctrl_buffer; /* buffers of urbs */ + dma_addr_t ctrl_dma; /* dma handles of buffers */ struct acm_wb wb[ACM_NWB]; + struct acm_ru ru[ACM_NRU]; + struct acm_rb rb[ACM_NRB]; + int rx_endpoint; + spinlock_t read_lock; + struct list_head spare_read_urbs; + struct list_head spare_read_bufs; + struct list_head filled_read_bufs; int write_current; /* current write buffer */ int write_used; /* number of non-empty write buffers */ int write_ready; /* write urb is not running */ spinlock_t write_lock; struct usb_cdc_line_coding line; /* bits, stop, parity */ struct work_struct work; /* work queue entry for line discipline waking up */ - struct tasklet_struct bh; /* rx processing */ + struct tasklet_struct urb_task; /* rx processing */ spinlock_t throttle_lock; /* synchronize throtteling and read callback */ unsigned int ctrlin; /* input control lines (DCD, DSR, RI, break, overruns) */ unsigned int ctrlout; /* output control lines (DTR, RTS) */ @@ -91,7 +115,6 @@ struct acm { unsigned int minor; /* acm minor number */ unsigned char throttle; /* throttled by tty layer */ unsigned char clocal; /* termios CLOCAL */ - unsigned char resubmit_to_unthrottle; /* throtteling has disabled the read urb */ unsigned int ctrl_caps; /* control capabilities from the class specific header */ }; -- cgit v1.2.3 From 535488fcf1e4b2331e1c4a1eb67ca09468c13507 Mon Sep 17 00:00:00 2001 From: Olav Kongas Date: Fri, 28 Oct 2005 15:04:45 +0300 Subject: [PATCH] USB: isp116x-hcd: support reiniting HC on resume Until now the isp116x-hcd had no support to reinitialize the HC on resume, if the controller lost its state during suspend. This patch, generated against your Oct 26 git tree, adds that support. The patch is basically the same as the one tested by Ivan Kalatchev, who reported the problem, on 2.6.13. Please apply, Support reinitializing the isp116x host controller from scratch on resume, if the controller has lost its state. Signed-off-by: Olav Kongas Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp116x-hcd.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 82f64986bc22..5f56c4a42f52 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1201,11 +1201,14 @@ static int isp116x_bus_suspend(struct usb_hcd *hcd) return ret; } +/* Get rid of these declarations later in cleanup */ +static int isp116x_reset(struct usb_hcd *hcd); +static int isp116x_start(struct usb_hcd *hcd); + static int isp116x_bus_resume(struct usb_hcd *hcd) { struct isp116x *isp116x = hcd_to_isp116x(hcd); u32 val; - int ret = -EINPROGRESS; msleep(5); spin_lock_irq(&isp116x->lock); @@ -1219,20 +1222,27 @@ static int isp116x_bus_resume(struct usb_hcd *hcd) case HCCONTROL_USB_RESUME: break; case HCCONTROL_USB_OPER: + spin_unlock_irq(&isp116x->lock); /* Without setting power_state here the SUSPENDED state won't be removed from sysfs/usbN/power.state as a response to remote wakeup. Maybe in the future. */ hcd->self.root_hub->dev.power.power_state = PMSG_ON; - ret = 0; - break; + return 0; default: - ret = -EBUSY; - } - - if (ret != -EINPROGRESS) { + /* HCCONTROL_USB_RESET: this may happen, when during + suspension the HC lost power. Reinitialize completely */ spin_unlock_irq(&isp116x->lock); - return ret; + DBG("Chip has been reset while suspended. Reinit from scratch.\n"); + isp116x_reset(hcd); + isp116x_start(hcd); + isp116x_hub_control(hcd, SetPortFeature, + USB_PORT_FEAT_POWER, 1, NULL, 0); + if ((isp116x->rhdesca & RH_A_NDP) == 2) + isp116x_hub_control(hcd, SetPortFeature, + USB_PORT_FEAT_POWER, 2, NULL, 0); + hcd->self.root_hub->dev.power.power_state = PMSG_ON; + return 0; } val = isp116x->rhdesca & RH_A_NDP; -- cgit v1.2.3 From 959eea2191e8d74b16ef019b0f4bf875c14f4547 Mon Sep 17 00:00:00 2001 From: Olav Kongas Date: Thu, 3 Nov 2005 17:38:14 +0200 Subject: [PATCH] USB: isp116x-hcd: cleanup The attached patch makes a cleanup of isp116x-hcd. Most of the volume of the patch comes from 2 sources: moving the code around to get rid of a few function prototypes and reworking register dumping functions/macros. Among other things, switched over from using procfs to debugfs. Cleanup. The following changes were made: - Rework register dumping code so it can be used for dumping to both syslog and debugfs. - Switch from procfs to debugfs.. - Die gracefully on Unrecoverable Error interrupt. - Fix memory leak in isp116x_urb_enqueue(), if HC happens to die in a narrow time window. - Fix a 'sparce' warning (unnecessary cast). - Report Devices Removable for root hub ports by default (was Devices Permanently Attached). - Move bus suspend/resume functions down in code to get rid of a few function prototypes. - A number of one-line cleanups. - Add an entry to MAINTAINERS. Signed-off-by: Olav Kongas Signed-off-by: Greg Kroah-Hartman MAINTAINERS | 6 drivers/usb/host/isp116x-hcd.c | 429 ++++++++++++++++------------------------- drivers/usb/host/isp116x.h | 83 +++++-- 3 files changed, 230 insertions(+), 288 deletions(-) --- MAINTAINERS | 6 + drivers/usb/host/isp116x-hcd.c | 429 ++++++++++++++++------------------------- drivers/usb/host/isp116x.h | 83 +++++--- 3 files changed, 230 insertions(+), 288 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 6af683025ae0..861d2975476f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2640,6 +2640,12 @@ L: linux-usb-users@lists.sourceforge.net L: linux-usb-devel@lists.sourceforge.net S: Maintained +USB ISP116X DRIVER +P: Olav Kongas +M: ok@artecdesign.ee +L: linux-usb-devel@lists.sourceforge.net +S: Maintained + USB KAWASAKI LSI DRIVER P: Oliver Neukum M: oliver@neukum.name diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 5f56c4a42f52..342cfadc999a 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -55,19 +55,13 @@ /* enqueuing/finishing log of urbs */ //#define URB_TRACE -#include #include -#include -#include #include -#include -#include -#include -#include +#include +#include #include #include #include -#include #include #include #include @@ -77,14 +71,10 @@ #include #include -#ifndef DEBUG -# define STUB_DEBUG_FILE -#endif - #include "../core/hcd.h" #include "isp116x.h" -#define DRIVER_VERSION "05 Aug 2005" +#define DRIVER_VERSION "03 Nov 2005" #define DRIVER_DESC "ISP116x USB Host Controller Driver" MODULE_DESCRIPTION(DRIVER_DESC); @@ -305,9 +295,8 @@ static void postproc_atl_queue(struct isp116x *isp116x) udev = urb->dev; ptd = &ep->ptd; cc = PTD_GET_CC(ptd); - - spin_lock(&urb->lock); short_not_ok = 1; + spin_lock(&urb->lock); /* Data underrun is special. For allowed underrun we clear the error and continue as normal. For @@ -420,7 +409,7 @@ static void postproc_atl_queue(struct isp116x *isp116x) ep->nextpid = 0; break; default: - BUG_ON(1); + BUG(); } spin_unlock(&urb->lock); } @@ -628,8 +617,12 @@ static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs) u32 intstat = isp116x_read_reg32(isp116x, HCINTSTAT); isp116x_write_reg32(isp116x, HCINTSTAT, intstat); if (intstat & HCINT_UE) { - ERR("Unrecoverable error\n"); - /* What should we do here? Reset? */ + ERR("Unrecoverable error, HC is dead!\n"); + /* IRQ's are off, we do no DMA, + perfectly ready to die ... */ + hcd->state = HC_STATE_HALT; + ret = IRQ_HANDLED; + goto done; } if (intstat & HCINT_RHSC) /* When root hub or any of its ports is going @@ -640,7 +633,6 @@ static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs) if (intstat & HCINT_RD) { DBG("---- remote wakeup\n"); usb_hcd_resume_root_hub(hcd); - ret = IRQ_HANDLED; } irqstat &= ~HCuPINT_OPR; ret = IRQ_HANDLED; @@ -651,6 +643,7 @@ static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs) } isp116x_write_reg16(isp116x, HCuPINTENB, isp116x->irqenb); + done: spin_unlock(&isp116x->lock); return ret; } @@ -724,6 +717,7 @@ static int isp116x_urb_enqueue(struct usb_hcd *hcd, spin_lock_irqsave(&isp116x->lock, flags); if (!HC_IS_RUNNING(hcd->state)) { + kfree(ep); ret = -ENODEV; goto fail; } @@ -888,7 +882,7 @@ static void isp116x_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) { int i; - struct isp116x_ep *ep = hep->hcpriv;; + struct isp116x_ep *ep = hep->hcpriv; if (!ep) return; @@ -916,8 +910,6 @@ static int isp116x_get_frame(struct usb_hcd *hcd) return (int)fmnum; } -/*----------------------------------------------------------------*/ - /* Adapted from ohci-hub.c. Currently we don't support autosuspend. */ @@ -968,11 +960,10 @@ static void isp116x_hub_descriptor(struct isp116x *isp116x, desc->bHubContrCurrent = 0; desc->bNbrPorts = (u8) (reg & 0x3); /* Power switching, device type, overcurrent. */ - desc->wHubCharacteristics = - (__force __u16) cpu_to_le16((u16) ((reg >> 8) & 0x1f)); + desc->wHubCharacteristics = cpu_to_le16((u16) ((reg >> 8) & 0x1f)); desc->bPwrOn2PwrGood = (u8) ((reg >> 24) & 0xff); /* two bitmaps: ports removable, and legacy PortPwrCtrlMask */ - desc->bitmap[0] = desc->bNbrPorts == 1 ? 1 << 1 : 3 << 1; + desc->bitmap[0] = 0; desc->bitmap[1] = ~0; } @@ -1159,145 +1150,9 @@ static int isp116x_hub_control(struct usb_hcd *hcd, return ret; } -#ifdef CONFIG_PM - -static int isp116x_bus_suspend(struct usb_hcd *hcd) -{ - struct isp116x *isp116x = hcd_to_isp116x(hcd); - unsigned long flags; - u32 val; - int ret = 0; - - spin_lock_irqsave(&isp116x->lock, flags); - - val = isp116x_read_reg32(isp116x, HCCONTROL); - switch (val & HCCONTROL_HCFS) { - case HCCONTROL_USB_OPER: - hcd->state = HC_STATE_QUIESCING; - val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE); - val |= HCCONTROL_USB_SUSPEND; - if (hcd->remote_wakeup) - val |= HCCONTROL_RWE; - /* Wait for usb transfers to finish */ - mdelay(2); - isp116x_write_reg32(isp116x, HCCONTROL, val); - hcd->state = HC_STATE_SUSPENDED; - /* Wait for devices to suspend */ - mdelay(5); - case HCCONTROL_USB_SUSPEND: - break; - case HCCONTROL_USB_RESUME: - isp116x_write_reg32(isp116x, HCCONTROL, - (val & ~HCCONTROL_HCFS) | - HCCONTROL_USB_RESET); - case HCCONTROL_USB_RESET: - ret = -EBUSY; - break; - default: - ret = -EINVAL; - } - - spin_unlock_irqrestore(&isp116x->lock, flags); - return ret; -} - -/* Get rid of these declarations later in cleanup */ -static int isp116x_reset(struct usb_hcd *hcd); -static int isp116x_start(struct usb_hcd *hcd); - -static int isp116x_bus_resume(struct usb_hcd *hcd) -{ - struct isp116x *isp116x = hcd_to_isp116x(hcd); - u32 val; - - msleep(5); - spin_lock_irq(&isp116x->lock); - - val = isp116x_read_reg32(isp116x, HCCONTROL); - switch (val & HCCONTROL_HCFS) { - case HCCONTROL_USB_SUSPEND: - val &= ~HCCONTROL_HCFS; - val |= HCCONTROL_USB_RESUME; - isp116x_write_reg32(isp116x, HCCONTROL, val); - case HCCONTROL_USB_RESUME: - break; - case HCCONTROL_USB_OPER: - spin_unlock_irq(&isp116x->lock); - /* Without setting power_state here the - SUSPENDED state won't be removed from - sysfs/usbN/power.state as a response to remote - wakeup. Maybe in the future. */ - hcd->self.root_hub->dev.power.power_state = PMSG_ON; - return 0; - default: - /* HCCONTROL_USB_RESET: this may happen, when during - suspension the HC lost power. Reinitialize completely */ - spin_unlock_irq(&isp116x->lock); - DBG("Chip has been reset while suspended. Reinit from scratch.\n"); - isp116x_reset(hcd); - isp116x_start(hcd); - isp116x_hub_control(hcd, SetPortFeature, - USB_PORT_FEAT_POWER, 1, NULL, 0); - if ((isp116x->rhdesca & RH_A_NDP) == 2) - isp116x_hub_control(hcd, SetPortFeature, - USB_PORT_FEAT_POWER, 2, NULL, 0); - hcd->self.root_hub->dev.power.power_state = PMSG_ON; - return 0; - } - - val = isp116x->rhdesca & RH_A_NDP; - while (val--) { - u32 stat = - isp116x_read_reg32(isp116x, val ? HCRHPORT2 : HCRHPORT1); - /* force global, not selective, resume */ - if (!(stat & RH_PS_PSS)) - continue; - DBG("%s: Resuming port %d\n", __func__, val); - isp116x_write_reg32(isp116x, RH_PS_POCI, val - ? HCRHPORT2 : HCRHPORT1); - } - spin_unlock_irq(&isp116x->lock); - - hcd->state = HC_STATE_RESUMING; - mdelay(20); - - /* Go operational */ - spin_lock_irq(&isp116x->lock); - val = isp116x_read_reg32(isp116x, HCCONTROL); - isp116x_write_reg32(isp116x, HCCONTROL, - (val & ~HCCONTROL_HCFS) | HCCONTROL_USB_OPER); - spin_unlock_irq(&isp116x->lock); - /* see analogous comment above */ - hcd->self.root_hub->dev.power.power_state = PMSG_ON; - hcd->state = HC_STATE_RUNNING; - - return 0; -} - - -#else - -#define isp116x_bus_suspend NULL -#define isp116x_bus_resume NULL - -#endif - /*-----------------------------------------------------------------*/ -#ifdef STUB_DEBUG_FILE - -static inline void create_debug_file(struct isp116x *isp116x) -{ -} - -static inline void remove_debug_file(struct isp116x *isp116x) -{ -} - -#else - -#include -#include +#ifdef CONFIG_DEBUG_FS static void dump_irq(struct seq_file *s, char *label, u16 mask) { @@ -1321,13 +1176,9 @@ static void dump_int(struct seq_file *s, char *label, u32 mask) mask & HCINT_SF ? " sof" : "", mask & HCINT_SO ? " so" : ""); } -static int proc_isp116x_show(struct seq_file *s, void *unused) +static int isp116x_show_dbg(struct seq_file *s, void *unused) { struct isp116x *isp116x = s->private; - struct isp116x_ep *ep; - struct urb *urb; - unsigned i; - char *str; seq_printf(s, "%s\n%s version %s\n", isp116x_to_hcd(isp116x)->product_desc, hcd_name, @@ -1343,105 +1194,50 @@ static int proc_isp116x_show(struct seq_file *s, void *unused) } spin_lock_irq(&isp116x->lock); - dump_irq(s, "hc_irq_enable", isp116x_read_reg16(isp116x, HCuPINTENB)); dump_irq(s, "hc_irq_status", isp116x_read_reg16(isp116x, HCuPINT)); dump_int(s, "hc_int_enable", isp116x_read_reg32(isp116x, HCINTENB)); dump_int(s, "hc_int_status", isp116x_read_reg32(isp116x, HCINTSTAT)); - - list_for_each_entry(ep, &isp116x->async, schedule) { - - switch (ep->nextpid) { - case USB_PID_IN: - str = "in"; - break; - case USB_PID_OUT: - str = "out"; - break; - case USB_PID_SETUP: - str = "setup"; - break; - case USB_PID_ACK: - str = "status"; - break; - default: - str = "?"; - break; - }; - seq_printf(s, "%p, ep%d%s, maxpacket %d:\n", ep, - ep->epnum, str, ep->maxpacket); - list_for_each_entry(urb, &ep->hep->urb_list, urb_list) { - seq_printf(s, " urb%p, %d/%d\n", urb, - urb->actual_length, - urb->transfer_buffer_length); - } - } - if (!list_empty(&isp116x->async)) - seq_printf(s, "\n"); - - seq_printf(s, "periodic size= %d\n", PERIODIC_SIZE); - - for (i = 0; i < PERIODIC_SIZE; i++) { - ep = isp116x->periodic[i]; - if (!ep) - continue; - seq_printf(s, "%2d [%3d]:\n", i, isp116x->load[i]); - - /* DUMB: prints shared entries multiple times */ - do { - seq_printf(s, " %d/%p (%sdev%d ep%d%s max %d)\n", - ep->period, ep, - (ep->udev->speed == - USB_SPEED_FULL) ? "" : "ls ", - ep->udev->devnum, ep->epnum, - (ep->epnum == - 0) ? "" : ((ep->nextpid == - USB_PID_IN) ? "in" : "out"), - ep->maxpacket); - ep = ep->next; - } while (ep); - } + isp116x_show_regs_seq(isp116x, s); spin_unlock_irq(&isp116x->lock); seq_printf(s, "\n"); return 0; } -static int proc_isp116x_open(struct inode *inode, struct file *file) +static int isp116x_open_seq(struct inode *inode, struct file *file) { - return single_open(file, proc_isp116x_show, PDE(inode)->data); + return single_open(file, isp116x_show_dbg, inode->u.generic_ip); } -static struct file_operations proc_ops = { - .open = proc_isp116x_open, +static struct file_operations isp116x_debug_fops = { + .open = isp116x_open_seq, .read = seq_read, .llseek = seq_lseek, .release = single_release, }; -/* expect just one isp116x per system */ -static const char proc_filename[] = "driver/isp116x"; - -static void create_debug_file(struct isp116x *isp116x) +static int create_debug_file(struct isp116x *isp116x) { - struct proc_dir_entry *pde; - - pde = create_proc_entry(proc_filename, 0, NULL); - if (pde == NULL) - return; - - pde->proc_fops = &proc_ops; - pde->data = isp116x; - isp116x->pde = pde; + isp116x->dentry = debugfs_create_file(hcd_name, + S_IRUGO, NULL, isp116x, + &isp116x_debug_fops); + if (!isp116x->dentry) + return -ENOMEM; + return 0; } static void remove_debug_file(struct isp116x *isp116x) { - if (isp116x->pde) - remove_proc_entry(proc_filename, NULL); + debugfs_remove(isp116x->dentry); } -#endif +#else + +#define create_debug_file(d) 0 +#define remove_debug_file(d) do{}while(0) + +#endif /* CONFIG_DEBUG_FS */ /*-----------------------------------------------------------------*/ @@ -1476,7 +1272,7 @@ static int isp116x_reset(struct usb_hcd *hcd) struct isp116x *isp116x = hcd_to_isp116x(hcd); unsigned long t; u16 clkrdy = 0; - int ret = 0, timeout = 15 /* ms */ ; + int ret, timeout = 15 /* ms */ ; ret = isp116x_sw_reset(isp116x); if (ret) @@ -1492,7 +1288,7 @@ static int isp116x_reset(struct usb_hcd *hcd) break; } if (!clkrdy) { - ERR("Clock not ready after 20ms\n"); + ERR("Clock not ready after %dms\n", timeout); /* After sw_reset the clock won't report to be ready, if H_WAKEUP pin is high. */ ERR("Please make sure that the H_WAKEUP pin is pulled low!\n"); @@ -1610,12 +1406,128 @@ static int isp116x_start(struct usb_hcd *hcd) isp116x_write_reg32(isp116x, HCRHPORT1, RH_PS_CCS); isp116x_write_reg32(isp116x, HCRHPORT2, RH_PS_CCS); - isp116x_show_regs(isp116x); + isp116x_show_regs_log(isp116x); spin_unlock_irqrestore(&isp116x->lock, flags); return 0; } -/*-----------------------------------------------------------------*/ +#ifdef CONFIG_PM + +static int isp116x_bus_suspend(struct usb_hcd *hcd) +{ + struct isp116x *isp116x = hcd_to_isp116x(hcd); + unsigned long flags; + u32 val; + int ret = 0; + + spin_lock_irqsave(&isp116x->lock, flags); + + val = isp116x_read_reg32(isp116x, HCCONTROL); + switch (val & HCCONTROL_HCFS) { + case HCCONTROL_USB_OPER: + hcd->state = HC_STATE_QUIESCING; + val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE); + val |= HCCONTROL_USB_SUSPEND; + if (hcd->remote_wakeup) + val |= HCCONTROL_RWE; + /* Wait for usb transfers to finish */ + mdelay(2); + isp116x_write_reg32(isp116x, HCCONTROL, val); + hcd->state = HC_STATE_SUSPENDED; + /* Wait for devices to suspend */ + mdelay(5); + case HCCONTROL_USB_SUSPEND: + break; + case HCCONTROL_USB_RESUME: + isp116x_write_reg32(isp116x, HCCONTROL, + (val & ~HCCONTROL_HCFS) | + HCCONTROL_USB_RESET); + case HCCONTROL_USB_RESET: + ret = -EBUSY; + break; + default: + ret = -EINVAL; + } + + spin_unlock_irqrestore(&isp116x->lock, flags); + return ret; +} + +static int isp116x_bus_resume(struct usb_hcd *hcd) +{ + struct isp116x *isp116x = hcd_to_isp116x(hcd); + u32 val; + + msleep(5); + spin_lock_irq(&isp116x->lock); + + val = isp116x_read_reg32(isp116x, HCCONTROL); + switch (val & HCCONTROL_HCFS) { + case HCCONTROL_USB_SUSPEND: + val &= ~HCCONTROL_HCFS; + val |= HCCONTROL_USB_RESUME; + isp116x_write_reg32(isp116x, HCCONTROL, val); + case HCCONTROL_USB_RESUME: + break; + case HCCONTROL_USB_OPER: + spin_unlock_irq(&isp116x->lock); + /* Without setting power_state here the + SUSPENDED state won't be removed from + sysfs/usbN/power.state as a response to remote + wakeup. Maybe in the future. */ + hcd->self.root_hub->dev.power.power_state = PMSG_ON; + return 0; + default: + /* HCCONTROL_USB_RESET: this may happen, when during + suspension the HC lost power. Reinitialize completely */ + spin_unlock_irq(&isp116x->lock); + DBG("Chip has been reset while suspended. Reinit from scratch.\n"); + isp116x_reset(hcd); + isp116x_start(hcd); + isp116x_hub_control(hcd, SetPortFeature, + USB_PORT_FEAT_POWER, 1, NULL, 0); + if ((isp116x->rhdesca & RH_A_NDP) == 2) + isp116x_hub_control(hcd, SetPortFeature, + USB_PORT_FEAT_POWER, 2, NULL, 0); + hcd->self.root_hub->dev.power.power_state = PMSG_ON; + return 0; + } + + val = isp116x->rhdesca & RH_A_NDP; + while (val--) { + u32 stat = + isp116x_read_reg32(isp116x, val ? HCRHPORT2 : HCRHPORT1); + /* force global, not selective, resume */ + if (!(stat & RH_PS_PSS)) + continue; + DBG("%s: Resuming port %d\n", __func__, val); + isp116x_write_reg32(isp116x, RH_PS_POCI, val + ? HCRHPORT2 : HCRHPORT1); + } + spin_unlock_irq(&isp116x->lock); + + hcd->state = HC_STATE_RESUMING; + msleep(20); + + /* Go operational */ + spin_lock_irq(&isp116x->lock); + val = isp116x_read_reg32(isp116x, HCCONTROL); + isp116x_write_reg32(isp116x, HCCONTROL, + (val & ~HCCONTROL_HCFS) | HCCONTROL_USB_OPER); + spin_unlock_irq(&isp116x->lock); + /* see analogous comment above */ + hcd->self.root_hub->dev.power.power_state = PMSG_ON; + hcd->state = HC_STATE_RUNNING; + + return 0; +} + +#else + +#define isp116x_bus_suspend NULL +#define isp116x_bus_resume NULL + +#endif static struct hc_driver isp116x_hc_driver = { .description = hcd_name, @@ -1745,12 +1657,19 @@ static int __init isp116x_probe(struct platform_device *pdev) } ret = usb_add_hcd(hcd, irq, SA_INTERRUPT); - if (ret != 0) + if (ret) goto err6; - create_debug_file(isp116x); + ret = create_debug_file(isp116x); + if (ret) { + ERR("Couldn't create debugfs entry\n"); + goto err7; + } + return 0; + err7: + usb_remove_hcd(hcd); err6: usb_put_hcd(hcd); err5: @@ -1772,13 +1691,9 @@ static int __init isp116x_probe(struct platform_device *pdev) */ static int isp116x_suspend(struct platform_device *dev, pm_message_t state) { - int ret = 0; - - VDBG("%s: state %x\n", __func__, state); - + VDBG("%s: state %x\n", __func__, state.event); dev->dev.power.power_state = state; - - return ret; + return 0; } /* @@ -1786,13 +1701,9 @@ static int isp116x_suspend(struct platform_device *dev, pm_message_t state) */ static int isp116x_resume(struct platform_device *dev) { - int ret = 0; - - VDBG("%s: state %x\n", __func__, dev->dev.power.power_state); - + VDBG("%s: state %x\n", __func__, dev->power.power_state.event); dev->dev.power.power_state = PMSG_ON; - - return ret; + return 0; } #else diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h index c6fec96785fe..a1b7c3813d3a 100644 --- a/drivers/usb/host/isp116x.h +++ b/drivers/usb/host/isp116x.h @@ -259,7 +259,7 @@ struct isp116x { struct isp116x_platform_data *board; - struct proc_dir_entry *pde; + struct dentry *dentry; unsigned long stat1, stat2, stat4, stat8, stat16; /* HC registers */ @@ -450,7 +450,7 @@ static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg, isp116x_write_data32(isp116x, (u32) val); } -#define isp116x_show_reg(d,r) { \ +#define isp116x_show_reg_log(d,r,s) { \ if ((r) < 0x20) { \ DBG("%-12s[%02x]: %08x\n", #r, \ r, isp116x_read_reg32(d, r)); \ @@ -459,35 +459,60 @@ static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg, r, isp116x_read_reg16(d, r)); \ } \ } +#define isp116x_show_reg_seq(d,r,s) { \ + if ((r) < 0x20) { \ + seq_printf(s, "%-12s[%02x]: %08x\n", #r, \ + r, isp116x_read_reg32(d, r)); \ + } else { \ + seq_printf(s, "%-12s[%02x]: %04x\n", #r, \ + r, isp116x_read_reg16(d, r)); \ + } \ +} -static inline void isp116x_show_regs(struct isp116x *isp116x) +#define isp116x_show_regs(d,type,s) { \ + isp116x_show_reg_##type(d, HCREVISION, s); \ + isp116x_show_reg_##type(d, HCCONTROL, s); \ + isp116x_show_reg_##type(d, HCCMDSTAT, s); \ + isp116x_show_reg_##type(d, HCINTSTAT, s); \ + isp116x_show_reg_##type(d, HCINTENB, s); \ + isp116x_show_reg_##type(d, HCFMINTVL, s); \ + isp116x_show_reg_##type(d, HCFMREM, s); \ + isp116x_show_reg_##type(d, HCFMNUM, s); \ + isp116x_show_reg_##type(d, HCLSTHRESH, s); \ + isp116x_show_reg_##type(d, HCRHDESCA, s); \ + isp116x_show_reg_##type(d, HCRHDESCB, s); \ + isp116x_show_reg_##type(d, HCRHSTATUS, s); \ + isp116x_show_reg_##type(d, HCRHPORT1, s); \ + isp116x_show_reg_##type(d, HCRHPORT2, s); \ + isp116x_show_reg_##type(d, HCHWCFG, s); \ + isp116x_show_reg_##type(d, HCDMACFG, s); \ + isp116x_show_reg_##type(d, HCXFERCTR, s); \ + isp116x_show_reg_##type(d, HCuPINT, s); \ + isp116x_show_reg_##type(d, HCuPINTENB, s); \ + isp116x_show_reg_##type(d, HCCHIPID, s); \ + isp116x_show_reg_##type(d, HCSCRATCH, s); \ + isp116x_show_reg_##type(d, HCITLBUFLEN, s); \ + isp116x_show_reg_##type(d, HCATLBUFLEN, s); \ + isp116x_show_reg_##type(d, HCBUFSTAT, s); \ + isp116x_show_reg_##type(d, HCRDITL0LEN, s); \ + isp116x_show_reg_##type(d, HCRDITL1LEN, s); \ +} + +/* + Dump registers for debugfs. +*/ +static inline void isp116x_show_regs_seq(struct isp116x *isp116x, + struct seq_file *s) +{ + isp116x_show_regs(isp116x, seq, s); +} + +/* + Dump registers to syslog. +*/ +static inline void isp116x_show_regs_log(struct isp116x *isp116x) { - isp116x_show_reg(isp116x, HCREVISION); - isp116x_show_reg(isp116x, HCCONTROL); - isp116x_show_reg(isp116x, HCCMDSTAT); - isp116x_show_reg(isp116x, HCINTSTAT); - isp116x_show_reg(isp116x, HCINTENB); - isp116x_show_reg(isp116x, HCFMINTVL); - isp116x_show_reg(isp116x, HCFMREM); - isp116x_show_reg(isp116x, HCFMNUM); - isp116x_show_reg(isp116x, HCLSTHRESH); - isp116x_show_reg(isp116x, HCRHDESCA); - isp116x_show_reg(isp116x, HCRHDESCB); - isp116x_show_reg(isp116x, HCRHSTATUS); - isp116x_show_reg(isp116x, HCRHPORT1); - isp116x_show_reg(isp116x, HCRHPORT2); - isp116x_show_reg(isp116x, HCHWCFG); - isp116x_show_reg(isp116x, HCDMACFG); - isp116x_show_reg(isp116x, HCXFERCTR); - isp116x_show_reg(isp116x, HCuPINT); - isp116x_show_reg(isp116x, HCuPINTENB); - isp116x_show_reg(isp116x, HCCHIPID); - isp116x_show_reg(isp116x, HCSCRATCH); - isp116x_show_reg(isp116x, HCITLBUFLEN); - isp116x_show_reg(isp116x, HCATLBUFLEN); - isp116x_show_reg(isp116x, HCBUFSTAT); - isp116x_show_reg(isp116x, HCRDITL0LEN); - isp116x_show_reg(isp116x, HCRDITL1LEN); + isp116x_show_regs(isp116x, log, NULL); } #if defined(URB_TRACE) -- cgit v1.2.3 From 6912354a895fcd234155273fe8838a0d83259a9b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 3 Nov 2005 11:44:49 -0500 Subject: [PATCH] USB: EHCI: fix conflation of buf == 0 with len == 0 When the ehci-hcd driver prepares a control URB, it tests for a zero-length data stage by looking at the transfer_dma value instead of the transfer_buffer_length. (In fact it does this even for non-control URBs, which is an additional aspect of the same bug.) However, under certain circumstances it's possible for transfer_dma to be 0 while transfer_buffer_length is non-zero. This can happen when a freshly allocated page (mapped to address 0 and marked Copy-On-Write, but never written to) is used as the source buffer for an OUT transfer. This patch (as598) fixes the problem. Signed-off-by: Alan Stern Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-q.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index bf03ec0d8ee2..9b13bf2fa98d 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -514,18 +514,18 @@ qh_urb_transaction ( qtd->urb = urb; qtd_prev->hw_next = QTD_NEXT (qtd->qtd_dma); list_add_tail (&qtd->qtd_list, head); + + /* for zero length DATA stages, STATUS is always IN */ + if (len == 0) + token |= (1 /* "in" */ << 8); } /* * data transfer stage: buffer setup */ - if (likely (len > 0)) - buf = urb->transfer_dma; - else - buf = 0; + buf = urb->transfer_dma; - /* for zero length DATA stages, STATUS is always IN */ - if (!buf || is_input) + if (is_input) token |= (1 /* "in" */ << 8); /* else it's already initted to "out" pid (0 << 8) */ @@ -572,7 +572,7 @@ qh_urb_transaction ( * control requests may need a terminating data "status" ack; * bulk ones may need a terminating short packet (zero length). */ - if (likely (buf != 0)) { + if (likely (urb->transfer_buffer_length != 0)) { int one_more = 0; if (usb_pipecontrol (urb->pipe)) { -- cgit v1.2.3 From b72458a80c75cab832248f536412f386e20a93a0 Mon Sep 17 00:00:00 2001 From: matthieu castet Date: Mon, 7 Nov 2005 23:27:13 +0100 Subject: [PATCH] USB: Eagle and ADI 930 usb adsl modem driver A driver for USB ADSL modems based on the ADI eagle chipset using the usb_atm infrastructure. The managing part was taken from bsd ueagle driver, other parts were written from scratch. The driver uses the in-kernel firmware loader : - to load a first usb firmware when the modem is in pre-firmware state - to load the dsp firmware that are swapped in host memory. - to load CMV (configuration and management variables) when the modem boot. (We can't use options or sysfs for this as there many possible values. See https://mail.gna.org/public/eagleusb-dev/2005-04/msg00031.html for a description of some) - to load fpga code for 930 chipset. The device had 4 endpoints : * 2 for data (use by usbatm). The incoming endpoint could be iso or bulk. The modem seems buggy and produce lot's of atm errors when using it in bulk mode for speed > 3Mbps, so iso endpoint is need for speed > 3Mbps. At the moment iso endpoint need a patched usbatm library and for this reason is not included in this patch. * One bulk endpoint for uploading dsp firmware * One irq endpoint that notices the driver - if we need to upload a page of the dsp firmware - an ack for read or write CMV and the value (for the read case). If order to make the driver cleaner, we design synchronous (read|write)_cmv : -send a synchronous control message to the modem -wait for an ack or a timeout -return the value if needed. In order to run these synchronous usb messages we need a kernel thread. The driver has been tested with sagem fast 800 modems with different eagle chipset revision and with ADI 930 since April 2005. Signed-off-by: Matthieu CASTET Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/atm/Kconfig | 13 + drivers/usb/atm/Makefile | 1 + drivers/usb/atm/ueagle-atm.c | 1813 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1827 insertions(+) create mode 100644 drivers/usb/atm/ueagle-atm.c diff --git a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig index f429862e0974..550ddfa71a43 100644 --- a/drivers/usb/atm/Kconfig +++ b/drivers/usb/atm/Kconfig @@ -44,6 +44,19 @@ config USB_CXACRU To compile this driver as a module, choose M here: the module will be called cxacru. +config USB_UEAGLEATM + tristate "ADI 930 and eagle USB DSL modem" + depends on USB_ATM + select FW_LOADER + help + Say Y here if you have an ADSL USB modem based on the ADI 930 + or eagle chipset. In order to use your modem you will need to + install firmwares and CMV (Command Management Variables); see + for details. + + To compile this driver as a module, choose M here: the + module will be called ueagle-atm. + config USB_XUSBATM tristate "Other USB DSL modem support" depends on USB_ATM diff --git a/drivers/usb/atm/Makefile b/drivers/usb/atm/Makefile index 85099718c683..4c4a776ab1cd 100644 --- a/drivers/usb/atm/Makefile +++ b/drivers/usb/atm/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_USB_CXACRU) += cxacru.o obj-$(CONFIG_USB_SPEEDTOUCH) += speedtch.o +obj-$(CONFIG_USB_UEAGLEATM) += ueagle-atm.o obj-$(CONFIG_USB_ATM) += usbatm.o obj-$(CONFIG_USB_XUSBATM) += xusbatm.o diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c new file mode 100644 index 000000000000..3e2475c666ab --- /dev/null +++ b/drivers/usb/atm/ueagle-atm.c @@ -0,0 +1,1813 @@ +/*- + * Copyright (c) 2003, 2004 + * Damien Bergamini . All rights reserved. + * + * Copyright (c) 2005 Matthieu Castet + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * BSD license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice unmodified, this list of conditions, and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * GPL license : + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * + * HISTORY : some part of the code was base on ueagle 1.3 BSD driver, + * Damien Bergamini agree to put his code under a DUAL GPL/BSD license. + * + * The rest of the code was was rewritten from scratch. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "usbatm.h" + +#define EAGLEUSBVERSION "ueagle 1.1" + + +/* + * Debug macros + */ +#define uea_dbg(usb_dev, format, args...) \ + do { \ + if (debug >= 1) \ + dev_dbg(&(usb_dev)->dev, \ + "[ueagle-atm dbg] %s: " format, \ + __FUNCTION__, ##args); \ + } while (0) + +#define uea_vdbg(usb_dev, format, args...) \ + do { \ + if (debug >= 2) \ + dev_dbg(&(usb_dev)->dev, \ + "[ueagle-atm vdbg] " format, ##args); \ + } while (0) + +#define uea_enters(usb_dev) \ + uea_vdbg(usb_dev, "entering %s\n", __FUNCTION__) + +#define uea_leaves(usb_dev) \ + uea_vdbg(usb_dev, "leaving %s\n", __FUNCTION__) + +#define uea_err(usb_dev, format,args...) \ + dev_err(&(usb_dev)->dev ,"[UEAGLE-ATM] " format , ##args) + +#define uea_warn(usb_dev, format,args...) \ + dev_warn(&(usb_dev)->dev ,"[Ueagle-atm] " format, ##args) + +#define uea_info(usb_dev, format,args...) \ + dev_info(&(usb_dev)->dev ,"[ueagle-atm] " format, ##args) + +struct uea_cmvs { + u32 address; + u16 offset; + u32 data; +} __attribute__ ((packed)); + +struct uea_softc { + struct usb_device *usb_dev; + struct usbatm_data *usbatm; + + int modem_index; + unsigned int driver_info; + + int booting; + int reset; + + wait_queue_head_t sync_q; + + struct task_struct *kthread; + u32 data; + wait_queue_head_t cmv_ack_wait; + int cmv_ack; + + struct work_struct task; + u16 pageno; + u16 ovl; + + const struct firmware *dsp_firm; + struct urb *urb_int; + + u8 cmv_function; + u16 cmv_idx; + u32 cmv_address; + u16 cmv_offset; + + /* keep in sync with eaglectl */ + struct uea_stats { + struct { + u32 state; + u32 flags; + u32 mflags; + u32 vidcpe; + u32 vidco; + u32 dsrate; + u32 usrate; + u32 dsunc; + u32 usunc; + u32 dscorr; + u32 uscorr; + u32 txflow; + u32 rxflow; + u32 usattenuation; + u32 dsattenuation; + u32 dsmargin; + u32 usmargin; + u32 firmid; + } phy; + } stats; +}; + +/* + * Elsa IDs + */ +#define ELSA_VID 0x05CC +#define ELSA_PID_PSTFIRM 0x3350 +#define ELSA_PID_PREFIRM 0x3351 + +/* + * Sagem USB IDs + */ +#define EAGLE_VID 0x1110 +#define EAGLE_I_PID_PREFIRM 0x9010 /* Eagle I */ +#define EAGLE_I_PID_PSTFIRM 0x900F /* Eagle I */ + +#define EAGLE_IIC_PID_PREFIRM 0x9024 /* Eagle IIC */ +#define EAGLE_IIC_PID_PSTFIRM 0x9023 /* Eagle IIC */ + +#define EAGLE_II_PID_PREFIRM 0x9022 /* Eagle II */ +#define EAGLE_II_PID_PSTFIRM 0x9021 /* Eagle II */ + +/* + * Eagle III Pid + */ +#define EAGLE_III_PID_PREFIRM 0x9032 /* Eagle III */ +#define EAGLE_III_PID_PSTFIRM 0x9031 /* Eagle III */ + +/* + * USR USB IDs + */ +#define USR_VID 0x0BAF +#define MILLER_A_PID_PREFIRM 0x00F2 +#define MILLER_A_PID_PSTFIRM 0x00F1 +#define MILLER_B_PID_PREFIRM 0x00FA +#define MILLER_B_PID_PSTFIRM 0x00F9 +#define HEINEKEN_A_PID_PREFIRM 0x00F6 +#define HEINEKEN_A_PID_PSTFIRM 0x00F5 +#define HEINEKEN_B_PID_PREFIRM 0x00F8 +#define HEINEKEN_B_PID_PSTFIRM 0x00F7 + +#define PREFIRM 0 +#define PSTFIRM (1<<7) +enum { + ADI930 = 0, + EAGLE_I, + EAGLE_II, + EAGLE_III +}; + +/* macros for both struct usb_device_id and struct uea_softc */ +#define UEA_IS_PREFIRM(x) \ + (!((x)->driver_info & PSTFIRM)) +#define UEA_CHIP_VERSION(x) \ + ((x)->driver_info & 0xf) + +#define IS_ISDN(sc) \ + (le16_to_cpu(sc->usb_dev->descriptor.bcdDevice) & 0x80) + +#define INS_TO_USBDEV(ins) ins->usb_dev + +#define GET_STATUS(data) \ + ((data >> 8) & 0xf) +#define IS_OPERATIONAL(sc) \ + (GET_STATUS(sc->stats.phy.state) == 2) + +/* + * Set of macros to handle unaligned data in the firmware blob. + * The FW_GET_BYTE() macro is provided only for consistency. + */ + +#define FW_GET_BYTE(p) *((__u8 *) (p)) +#define FW_GET_WORD(p) le16_to_cpu(get_unaligned((__le16 *) (p))) +#define FW_GET_LONG(p) le32_to_cpu(get_unaligned((__le32 *) (p))) + +#define FW_DIR "ueagle-atm/" +#define NB_MODEM 4 + +#define BULK_TIMEOUT 300 +#define CTRL_TIMEOUT 1000 + +#define ACK_TIMEOUT msecs_to_jiffies(1500) + +#define UEA_INTR_IFACE_NO 0 +#define UEA_US_IFACE_NO 1 +#define UEA_DS_IFACE_NO 2 + +#define FASTEST_ISO_INTF 8 + +#define UEA_BULK_DATA_PIPE 0x02 +#define UEA_IDMA_PIPE 0x04 +#define UEA_INTR_PIPE 0x04 +#define UEA_ISO_DATA_PIPE 0x08 + +#define UEA_SET_BLOCK 0x0001 +#define UEA_SET_MODE 0x0003 +#define UEA_SET_2183_DATA 0x0004 +#define UEA_SET_TIMEOUT 0x0011 + +#define UEA_LOOPBACK_OFF 0x0002 +#define UEA_LOOPBACK_ON 0x0003 +#define UEA_BOOT_IDMA 0x0006 +#define UEA_START_RESET 0x0007 +#define UEA_END_RESET 0x0008 + +#define UEA_SWAP_MAILBOX (0x3fcd | 0x4000) +#define UEA_MPTX_START (0x3fce | 0x4000) +#define UEA_MPTX_MAILBOX (0x3fd6 | 0x4000) +#define UEA_MPRX_MAILBOX (0x3fdf | 0x4000) + +/* structure describing a block within a DSP page */ +struct block_info { + __le16 wHdr; +#define UEA_BIHDR 0xabcd + __le16 wAddress; + __le16 wSize; + __le16 wOvlOffset; + __le16 wOvl; /* overlay */ + __le16 wLast; +} __attribute__ ((packed)); +#define BLOCK_INFO_SIZE 12 + +/* structure representing a CMV (Configuration and Management Variable) */ +struct cmv { + __le16 wPreamble; +#define PREAMBLE 0x535c + __u8 bDirection; +#define MODEMTOHOST 0x01 +#define HOSTTOMODEM 0x10 + __u8 bFunction; +#define FUNCTION_TYPE(f) ((f) >> 4) +#define MEMACCESS 0x1 +#define ADSLDIRECTIVE 0x7 + +#define FUNCTION_SUBTYPE(f) ((f) & 0x0f) +/* for MEMACCESS */ +#define REQUESTREAD 0x0 +#define REQUESTWRITE 0x1 +#define REPLYREAD 0x2 +#define REPLYWRITE 0x3 +/* for ADSLDIRECTIVE */ +#define KERNELREADY 0x0 +#define MODEMREADY 0x1 + +#define MAKEFUNCTION(t, s) (((t) & 0xf) << 4 | ((s) & 0xf)) + __le16 wIndex; + __le32 dwSymbolicAddress; +#define MAKESA(a, b, c, d) \ + (((c) & 0xff) << 24 | \ + ((d) & 0xff) << 16 | \ + ((a) & 0xff) << 8 | \ + ((b) & 0xff)) + +#define SA_CNTL MAKESA('C', 'N', 'T', 'L') +#define SA_DIAG MAKESA('D', 'I', 'A', 'G') +#define SA_INFO MAKESA('I', 'N', 'F', 'O') +#define SA_OPTN MAKESA('O', 'P', 'T', 'N') +#define SA_RATE MAKESA('R', 'A', 'T', 'E') +#define SA_STAT MAKESA('S', 'T', 'A', 'T') + __le16 wOffsetAddress; + __le32 dwData; +} __attribute__ ((packed)); +#define CMV_SIZE 16 + +/* structure representing swap information */ +struct swap_info { + __u8 bSwapPageNo; + __u8 bOvl; /* overlay */ +} __attribute__ ((packed)); + +/* structure representing interrupt data */ +struct intr_pkt { + __u8 bType; + __u8 bNotification; + __le16 wValue; + __le16 wIndex; + __le16 wLength; + __le16 wInterrupt; +#define INT_LOADSWAPPAGE 0x0001 +#define INT_INCOMINGCMV 0x0002 + union { + struct { + struct swap_info swapinfo; + __le16 wDataSize; + } __attribute__ ((packed)) s1; + + struct { + struct cmv cmv; + __le16 wDataSize; + } __attribute__ ((packed)) s2; + } __attribute__ ((packed)) u; +#define bSwapPageNo u.s1.swapinfo.bSwapPageNo +#define bOvl u.s1.swapinfo.bOvl +} __attribute__ ((packed)); +#define INTR_PKT_SIZE 28 + +static struct usb_driver uea_driver; +static DECLARE_MUTEX(uea_semaphore); +static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III"}; + +static int modem_index; +static unsigned int debug; +static int sync_wait[NB_MODEM]; +static char *cmv_file[NB_MODEM]; + +module_param(debug, uint, 0644); +MODULE_PARM_DESC(debug, "module debug level (0=off,1=on,2=verbose)"); +module_param_array(sync_wait, bool, NULL, 0644); +MODULE_PARM_DESC(sync_wait, "wait the synchronisation before starting ATM"); +module_param_array(cmv_file, charp, NULL, 0644); +MODULE_PARM_DESC(cmv_file, + "file name with configuration and management variables"); + +#define UPDATE_ATM_STAT(type, val) \ + do { \ + if (sc->usbatm->atm_dev) \ + sc->usbatm->atm_dev->type = val; \ + } while (0) + +/* Firmware loading */ +#define LOAD_INTERNAL 0xA0 +#define F8051_USBCS 0x7f92 + +/** + * uea_send_modem_cmd - Send a command for pre-firmware devices. + */ +static int uea_send_modem_cmd(struct usb_device *usb, + u16 addr, u16 size, u8 * buff) +{ + int ret = -ENOMEM; + u8 *xfer_buff; + + xfer_buff = kmalloc(size, GFP_KERNEL); + if (xfer_buff) { + memcpy(xfer_buff, buff, size); + ret = usb_control_msg(usb, + usb_sndctrlpipe(usb, 0), + LOAD_INTERNAL, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, addr, 0, xfer_buff, + size, CTRL_TIMEOUT); + kfree(xfer_buff); + } + + if (ret < 0) + return ret; + + return (ret == size) ? 0 : -EIO; +} + +static void uea_upload_pre_firmware(const struct firmware *fw_entry, void *context) +{ + struct usb_device *usb = context; + u8 *pfw, value; + u32 crc = 0; + int ret, size; + + uea_enters(usb); + if (!fw_entry) { + uea_err(usb, "firmware is not available\n"); + goto err; + } + + pfw = fw_entry->data; + size = fw_entry->size; + + crc = FW_GET_LONG(pfw); + pfw += 4; + size -= 4; + if (crc32_be(0, pfw, size) != crc) { + uea_err(usb, "firmware is corrupted\n"); + goto err; + } + + /* + * Start to upload formware : send reset + */ + value = 1; + ret = uea_send_modem_cmd(usb, F8051_USBCS, sizeof(value), &value); + + if (ret < 0) { + uea_err(usb, "modem reset failed with error %d\n", ret); + goto err; + } + + while (size > 0) { + u8 len = FW_GET_BYTE(pfw); + u16 add = FW_GET_WORD(pfw + 1); + ret = uea_send_modem_cmd(usb, add, len, pfw + 3); + if (ret < 0) { + uea_err(usb, "uploading firmware data failed " + "with error %d\n", ret); + goto err; + } + pfw += len + 3; + size -= len + 3; + } + + /* + * Tell the modem we finish : de-assert reset + */ + value = 0; + ret = uea_send_modem_cmd(usb, F8051_USBCS, 1, &value); + if (ret < 0) + uea_err(usb, "modem de-assert failed with error %d\n", ret); + else + uea_info(usb, "firmware uploaded\n"); + +err: + uea_leaves(usb); +} + +/** + * uea_load_firmware - Load usb firmware for pre-firmware devices. + */ +static int uea_load_firmware(struct usb_device *usb, unsigned int ver) +{ + int ret; + char *fw_name = FW_DIR "eagle.fw"; + + uea_enters(usb); + uea_info(usb, "pre-firmware device, uploading firmware\n"); + + switch (ver) { + case ADI930: + fw_name = FW_DIR "adi930.fw"; + break; + case EAGLE_I: + fw_name = FW_DIR "eagleI.fw"; + break; + case EAGLE_II: + fw_name = FW_DIR "eagleII.fw"; + break; + case EAGLE_III: + fw_name = FW_DIR "eagleIII.fw"; + break; + } + + ret = request_firmware_nowait(THIS_MODULE, 1, fw_name, &usb->dev, usb, uea_upload_pre_firmware); + if (ret) + uea_err(usb, "firmware %s is not available\n", fw_name); + else + uea_info(usb, "loading firmware %s\n", fw_name); + + uea_leaves(usb); + return ret; +} + +/* modem management : dsp firmware, send/read CMV, monitoring statistic + */ + +/* + * Make sure that the DSP code provided is safe to use. + */ +static int check_dsp(u8 *dsp, unsigned int len) +{ + u8 pagecount, blockcount; + u16 blocksize; + u32 pageoffset; + unsigned int i, j, p, pp; + + /* enough space for pagecount? */ + if (len < 1) + return 1; + + pagecount = FW_GET_BYTE(dsp); + p = 1; + + /* enough space for page offsets? */ + if (p + 4 * pagecount > len) + return 1; + + for (i = 0; i < pagecount; i++) { + + pageoffset = FW_GET_LONG(dsp + p); + p += 4; + + if (pageoffset == 0) + continue; + + /* enough space for blockcount? */ + if (pageoffset >= len) + return 1; + + pp = pageoffset; + blockcount = FW_GET_BYTE(dsp + pp); + pp += 1; + + for (j = 0; j < blockcount; j++) { + + /* enough space for block header? */ + if (pp + 4 > len) + return 1; + + pp += 2; /* skip blockaddr */ + blocksize = FW_GET_WORD(dsp + pp); + pp += 2; + + /* enough space for block data? */ + if (pp + blocksize > len) + return 1; + + pp += blocksize; + } + } + + return 0; +} + +/* + * send data to the idma pipe + * */ +static int uea_idma_write(struct uea_softc *sc, void *data, u32 size) +{ + int ret = -ENOMEM; + u8 *xfer_buff; + int bytes_read; + + xfer_buff = kmalloc(size, GFP_KERNEL); + if (!xfer_buff) { + uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n"); + return ret; + } + + memcpy(xfer_buff, data, size); + + ret = usb_bulk_msg(sc->usb_dev, + usb_sndbulkpipe(sc->usb_dev, UEA_IDMA_PIPE), + xfer_buff, size, &bytes_read, BULK_TIMEOUT); + + kfree(xfer_buff); + if (ret < 0) + return ret; + if (size != bytes_read) { + uea_err(INS_TO_USBDEV(sc), "size != bytes_read %d %d\n", size, + bytes_read); + return -EIO; + } + + return 0; +} + +static int request_dsp(struct uea_softc *sc) +{ + int ret; + char *dsp_name; + + if (UEA_CHIP_VERSION(sc) == ADI930) { + if (IS_ISDN(sc)) + dsp_name = FW_DIR "DSP9i.bin"; + else + dsp_name = FW_DIR "DSP9p.bin"; + } else { + if (IS_ISDN(sc)) + dsp_name = FW_DIR "DSPei.bin"; + else + dsp_name = FW_DIR "DSPep.bin"; + } + + ret = request_firmware(&sc->dsp_firm, + dsp_name, &sc->usb_dev->dev); + if (ret < 0) { + uea_err(INS_TO_USBDEV(sc), + "requesting firmware %s failed with error %d\n", + dsp_name, ret); + return ret; + } + + if (check_dsp(sc->dsp_firm->data, sc->dsp_firm->size)) { + uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", + dsp_name); + release_firmware(sc->dsp_firm); + sc->dsp_firm = NULL; + return -EILSEQ; + } + + return 0; +} + +/* + * The uea_load_page() function must be called within a process context + */ +static void uea_load_page(void *xsc) +{ + struct uea_softc *sc = xsc; + u16 pageno = sc->pageno; + u16 ovl = sc->ovl; + struct block_info bi; + + u8 *p; + u8 pagecount, blockcount; + u16 blockaddr, blocksize; + u32 pageoffset; + int i; + + /* reload firmware when reboot start and it's loaded already */ + if (ovl == 0 && pageno == 0 && sc->dsp_firm) { + release_firmware(sc->dsp_firm); + sc->dsp_firm = NULL; + } + + if (sc->dsp_firm == NULL && request_dsp(sc) < 0) + return; + + p = sc->dsp_firm->data; + pagecount = FW_GET_BYTE(p); + p += 1; + + if (pageno >= pagecount) + goto bad1; + + p += 4 * pageno; + pageoffset = FW_GET_LONG(p); + + if (pageoffset == 0) + goto bad1; + + p = sc->dsp_firm->data + pageoffset; + blockcount = FW_GET_BYTE(p); + p += 1; + + uea_dbg(INS_TO_USBDEV(sc), + "sending %u blocks for DSP page %u\n", blockcount, pageno); + + bi.wHdr = cpu_to_le16(UEA_BIHDR); + bi.wOvl = cpu_to_le16(ovl); + bi.wOvlOffset = cpu_to_le16(ovl | 0x8000); + + for (i = 0; i < blockcount; i++) { + blockaddr = FW_GET_WORD(p); + p += 2; + + blocksize = FW_GET_WORD(p); + p += 2; + + bi.wSize = cpu_to_le16(blocksize); + bi.wAddress = cpu_to_le16(blockaddr); + bi.wLast = cpu_to_le16((i == blockcount - 1) ? 1 : 0); + + /* send block info through the IDMA pipe */ + if (uea_idma_write(sc, &bi, BLOCK_INFO_SIZE)) + goto bad2; + + /* send block data through the IDMA pipe */ + if (uea_idma_write(sc, p, blocksize)) + goto bad2; + + p += blocksize; + } + + return; + +bad2: + uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", i); + return; +bad1: + uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n",pageno); +} + +static inline void wake_up_cmv_ack(struct uea_softc *sc) +{ + sc->cmv_ack = 1; + wake_up(&sc->cmv_ack_wait); +} + +static inline int wait_cmv_ack(struct uea_softc *sc) +{ + int ret = wait_event_timeout(sc->cmv_ack_wait, + sc->cmv_ack, ACK_TIMEOUT); + sc->cmv_ack = 0; + + if (ret < 0) + return ret; + + return (ret == 0) ? -ETIMEDOUT : 0; + +} + +#define UCDC_SEND_ENCAPSULATED_COMMAND 0x00 + +static int uea_request(struct uea_softc *sc, + u16 value, u16 index, u16 size, void *data) +{ + u8 *xfer_buff; + int ret = -ENOMEM; + + xfer_buff = kmalloc(size, GFP_KERNEL); + if (!xfer_buff) { + uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n"); + return ret; + } + memcpy(xfer_buff, data, size); + + ret = usb_control_msg(sc->usb_dev, usb_sndctrlpipe(sc->usb_dev, 0), + UCDC_SEND_ENCAPSULATED_COMMAND, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, index, xfer_buff, size, CTRL_TIMEOUT); + + kfree(xfer_buff); + if (ret < 0) { + uea_err(INS_TO_USBDEV(sc), "usb_control_msg error %d\n", ret); + return ret; + } + + if (ret != size) { + uea_err(INS_TO_USBDEV(sc), + "usb_control_msg send only %d bytes (instead of %d)\n", + ret, size); + return -EIO; + } + + return 0; +} + +static int uea_cmv(struct uea_softc *sc, + u8 function, u32 address, u16 offset, u32 data) +{ + struct cmv cmv; + int ret; + + /* we send a request, but we expect a reply */ + sc->cmv_function = function | 0x2; + sc->cmv_idx++; + sc->cmv_address = address; + sc->cmv_offset = offset; + + cmv.wPreamble = cpu_to_le16(PREAMBLE); + cmv.bDirection = HOSTTOMODEM; + cmv.bFunction = function; + cmv.wIndex = cpu_to_le16(sc->cmv_idx); + put_unaligned(cpu_to_le32(address), &cmv.dwSymbolicAddress); + cmv.wOffsetAddress = cpu_to_le16(offset); + put_unaligned(cpu_to_le32(data >> 16 | data << 16), &cmv.dwData); + + ret = uea_request(sc, UEA_SET_BLOCK, UEA_MPTX_START, CMV_SIZE, &cmv); + if (ret < 0) + return ret; + return wait_cmv_ack(sc); +} + +static inline int uea_read_cmv(struct uea_softc *sc, + u32 address, u16 offset, u32 *data) +{ + int ret = uea_cmv(sc, MAKEFUNCTION(MEMACCESS, REQUESTREAD), + address, offset, 0); + if (ret < 0) + uea_err(INS_TO_USBDEV(sc), + "reading cmv failed with error %d\n", ret); + else + *data = sc->data; + + return ret; +} + +static inline int uea_write_cmv(struct uea_softc *sc, + u32 address, u16 offset, u32 data) +{ + int ret = uea_cmv(sc, MAKEFUNCTION(MEMACCESS, REQUESTWRITE), + address, offset, data); + if (ret < 0) + uea_err(INS_TO_USBDEV(sc), + "writing cmv failed with error %d\n", ret); + + return ret; +} + +/* + * Monitor the modem and update the stat + * return 0 if everything is ok + * return < 0 if an error occurs (-EAGAIN reboot needed) + */ +static int uea_stat(struct uea_softc *sc) +{ + u32 data; + int ret; + + uea_enters(INS_TO_USBDEV(sc)); + data = sc->stats.phy.state; + + ret = uea_read_cmv(sc, SA_STAT, 0, &sc->stats.phy.state); + if (ret < 0) + return ret; + + switch (GET_STATUS(sc->stats.phy.state)) { + case 0: /* not yet synchronized */ + uea_dbg(INS_TO_USBDEV(sc), + "modem not yet synchronized\n"); + return 0; + + case 1: /* initialization */ + uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n"); + return 0; + + case 2: /* operational */ + uea_vdbg(INS_TO_USBDEV(sc), "modem operational\n"); + break; + + case 3: /* fail ... */ + uea_info(INS_TO_USBDEV(sc), "modem synchronization failed\n"); + return -EAGAIN; + + case 4 ... 6: /* test state */ + uea_warn(INS_TO_USBDEV(sc), + "modem in test mode - not supported\n"); + return -EAGAIN; + + case 7: /* fast-retain ... */ + uea_info(INS_TO_USBDEV(sc), "modem in fast-retain mode\n"); + return 0; + default: + uea_err(INS_TO_USBDEV(sc), "modem invalid SW mode %d\n", + GET_STATUS(sc->stats.phy.state)); + return -EAGAIN; + } + + if (GET_STATUS(data) != 2) { + uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_OFF, 0, NULL); + uea_info(INS_TO_USBDEV(sc), "modem operational\n"); + + /* release the dsp firmware as it is not needed until + * the next failure + */ + if (sc->dsp_firm) { + release_firmware(sc->dsp_firm); + sc->dsp_firm = NULL; + } + + ret = uea_read_cmv(sc, SA_INFO, 10, &sc->stats.phy.firmid); + if (ret < 0) + return ret; + uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n", + sc->stats.phy.firmid); + } + + /* always update it as atm layer could not be init when we switch to + * operational state + */ + UPDATE_ATM_STAT(signal, ATM_PHY_SIG_FOUND); + + /* wake up processes waiting for synchronization */ + wake_up(&sc->sync_q); + + ret = uea_read_cmv(sc, SA_DIAG, 2, &sc->stats.phy.flags); + if (ret < 0) + return ret; + sc->stats.phy.mflags |= sc->stats.phy.flags; + + /* in case of a flags ( for example delineation LOSS (& 0x10)), + * we check the status again in order to detect the failure earlier + */ + if (sc->stats.phy.flags) { + uea_dbg(INS_TO_USBDEV(sc), "Stat flag = %d\n", + sc->stats.phy.flags); + return 0; + } + + ret = uea_read_cmv(sc, SA_RATE, 0, &data); + if (ret < 0) + return ret; + + /* in bulk mode the modem have problem with high rate + * changing internal timing could improve things, but the + * value is misterious. + * ADI930 don't support it (-EPIPE error). + */ + if (UEA_CHIP_VERSION(sc) != ADI930 + && sc->stats.phy.dsrate != (data >> 16) * 32) { + /* Original timming from ADI(used in windows driver) + * 0x20ffff>>16 * 32 = 32 * 32 = 1Mbits + */ + u16 timeout = (data <= 0x20ffff) ? 0 : 1; + ret = uea_request(sc, UEA_SET_TIMEOUT, timeout, 0, NULL); + uea_info(INS_TO_USBDEV(sc), + "setting new timeout %d%s\n", timeout, + ret < 0?" failed":""); + } + sc->stats.phy.dsrate = (data >> 16) * 32; + sc->stats.phy.usrate = (data & 0xffff) * 32; + UPDATE_ATM_STAT(link_rate, sc->stats.phy.dsrate * 1000 / 424); + + ret = uea_read_cmv(sc, SA_DIAG, 23, &data); + if (ret < 0) + return ret; + sc->stats.phy.dsattenuation = (data & 0xff) / 2; + + ret = uea_read_cmv(sc, SA_DIAG, 47, &data); + if (ret < 0) + return ret; + sc->stats.phy.usattenuation = (data & 0xff) / 2; + + ret = uea_read_cmv(sc, SA_DIAG, 25, &sc->stats.phy.dsmargin); + if (ret < 0) + return ret; + + ret = uea_read_cmv(sc, SA_DIAG, 49, &sc->stats.phy.usmargin); + if (ret < 0) + return ret; + + ret = uea_read_cmv(sc, SA_DIAG, 51, &sc->stats.phy.rxflow); + if (ret < 0) + return ret; + + ret = uea_read_cmv(sc, SA_DIAG, 52, &sc->stats.phy.txflow); + if (ret < 0) + return ret; + + ret = uea_read_cmv(sc, SA_DIAG, 54, &sc->stats.phy.dsunc); + if (ret < 0) + return ret; + + /* only for atu-c */ + ret = uea_read_cmv(sc, SA_DIAG, 58, &sc->stats.phy.usunc); + if (ret < 0) + return ret; + + ret = uea_read_cmv(sc, SA_DIAG, 53, &sc->stats.phy.dscorr); + if (ret < 0) + return ret; + + /* only for atu-c */ + ret = uea_read_cmv(sc, SA_DIAG, 57, &sc->stats.phy.uscorr); + if (ret < 0) + return ret; + + ret = uea_read_cmv(sc, SA_INFO, 8, &sc->stats.phy.vidco); + if (ret < 0) + return ret; + + ret = uea_read_cmv(sc, SA_INFO, 13, &sc->stats.phy.vidcpe); + if (ret < 0) + return ret; + + return 0; +} + +static int request_cmvs(struct uea_softc *sc, + struct uea_cmvs **cmvs, const struct firmware **fw) +{ + int ret, size; + u8 *data; + char *file; + static char cmv_name[256] = FW_DIR; + + if (cmv_file[sc->modem_index] == NULL) { + if (UEA_CHIP_VERSION(sc) == ADI930) + file = (IS_ISDN(sc)) ? "CMV9i.bin" : "CMV9p.bin"; + else + file = (IS_ISDN(sc)) ? "CMVei.bin" : "CMVep.bin"; + } else + file = cmv_file[sc->modem_index]; + + strcpy(cmv_name, FW_DIR); + strlcat(cmv_name, file, sizeof(cmv_name)); + + ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev); + if (ret < 0) { + uea_err(INS_TO_USBDEV(sc), + "requesting firmware %s failed with error %d\n", + cmv_name, ret); + return ret; + } + + data = (u8 *) (*fw)->data; + size = *data * sizeof(struct uea_cmvs) + 1; + if (size != (*fw)->size) { + uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", + cmv_name); + release_firmware(*fw); + return -EILSEQ; + } + + *cmvs = (struct uea_cmvs *)(data + 1); + return *data; +} + +/* Start boot post firmware modem: + * - send reset commands through usb control pipe + * - start workqueue for DSP loading + * - send CMV options to modem + */ + +static int uea_start_reset(struct uea_softc *sc) +{ + u16 zero = 0; /* ;-) */ + int i, len, ret; + struct uea_cmvs *cmvs; + const struct firmware *cmvs_fw; + + uea_enters(INS_TO_USBDEV(sc)); + uea_info(INS_TO_USBDEV(sc), "(re)booting started\n"); + + sc->booting = 1; + UPDATE_ATM_STAT(signal, ATM_PHY_SIG_LOST); + + /* reset statistics */ + memset(&sc->stats, 0, sizeof(struct uea_stats)); + + /* tell the modem that we want to boot in IDMA mode */ + uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL); + uea_request(sc, UEA_SET_MODE, UEA_BOOT_IDMA, 0, NULL); + + /* enter reset mode */ + uea_request(sc, UEA_SET_MODE, UEA_START_RESET, 0, NULL); + + /* original driver use 200ms, but windows driver use 100ms */ + msleep(100); + + /* leave reset mode */ + uea_request(sc, UEA_SET_MODE, UEA_END_RESET, 0, NULL); + + /* clear tx and rx mailboxes */ + uea_request(sc, UEA_SET_2183_DATA, UEA_MPTX_MAILBOX, 2, &zero); + uea_request(sc, UEA_SET_2183_DATA, UEA_MPRX_MAILBOX, 2, &zero); + uea_request(sc, UEA_SET_2183_DATA, UEA_SWAP_MAILBOX, 2, &zero); + + msleep(1000); + sc->cmv_function = MAKEFUNCTION(ADSLDIRECTIVE, MODEMREADY); + sc->booting = 0; + + /* start loading DSP */ + sc->pageno = 0; + sc->ovl = 0; + schedule_work(&sc->task); + + /* wait for modem ready CMV */ + ret = wait_cmv_ack(sc); + if (ret < 0) + return ret; + + /* Enter in R-IDLE (cmv) until instructed otherwise */ + ret = uea_write_cmv(sc, SA_CNTL, 0, 1); + if (ret < 0) + return ret; + + /* get options */ + ret = len = request_cmvs(sc, &cmvs, &cmvs_fw); + if (ret < 0) + return ret; + + /* send options */ + for (i = 0; i < len; i++) { + ret = uea_write_cmv(sc, FW_GET_LONG(&cmvs[i].address), + FW_GET_WORD(&cmvs[i].offset), + FW_GET_LONG(&cmvs[i].data)); + if (ret < 0) + goto out; + } + /* Enter in R-ACT-REQ */ + ret = uea_write_cmv(sc, SA_CNTL, 0, 2); +out: + release_firmware(cmvs_fw); + sc->reset = 0; + uea_leaves(INS_TO_USBDEV(sc)); + return ret; +} + +/* + * In case of an error wait 1s before rebooting the modem + * if the modem don't request reboot (-EAGAIN). + * Monitor the modem every 1s. + */ + +static int uea_kthread(void *data) +{ + struct uea_softc *sc = data; + int ret = -EAGAIN; + + uea_enters(INS_TO_USBDEV(sc)); + while (!kthread_should_stop()) { + if (ret < 0 || sc->reset) + ret = uea_start_reset(sc); + if (!ret) + ret = uea_stat(sc); + if (ret != -EAGAIN) + msleep(1000); + } + uea_leaves(INS_TO_USBDEV(sc)); + return ret; +} + +/* Load second usb firmware for ADI930 chip */ +static int load_XILINX_firmware(struct uea_softc *sc) +{ + const struct firmware *fw_entry; + int ret, size, u, ln; + u8 *pfw, value; + char *fw_name = FW_DIR "930-fpga.bin"; + + uea_enters(INS_TO_USBDEV(sc)); + + ret = request_firmware(&fw_entry, fw_name, &sc->usb_dev->dev); + if (ret) { + uea_err(INS_TO_USBDEV(sc), "firmware %s is not available\n", + fw_name); + goto err0; + } + + pfw = fw_entry->data; + size = fw_entry->size; + if (size != 0x577B) { + uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", + fw_name); + ret = -EILSEQ; + goto err1; + } + for (u = 0; u < size; u += ln) { + ln = min(size - u, 64); + ret = uea_request(sc, 0xe, 0, ln, pfw + u); + if (ret < 0) { + uea_err(INS_TO_USBDEV(sc), + "elsa download data failed (%d)\n", ret); + goto err1; + } + } + + /* finish to send the fpga + */ + ret = uea_request(sc, 0xe, 1, 0, NULL); + if (ret < 0) { + uea_err(INS_TO_USBDEV(sc), + "elsa download data failed (%d)\n", ret); + goto err1; + } + + /* + * Tell the modem we finish : de-assert reset + */ + value = 0; + ret = uea_send_modem_cmd(sc->usb_dev, 0xe, 1, &value); + if (ret < 0) + uea_err(sc->usb_dev, "elsa de-assert failed with error %d\n", ret); + + +err1: + release_firmware(fw_entry); +err0: + uea_leaves(INS_TO_USBDEV(sc)); + return ret; +} + +static void uea_dispatch_cmv(struct uea_softc *sc, struct cmv* cmv) +{ + uea_enters(INS_TO_USBDEV(sc)); + if (le16_to_cpu(cmv->wPreamble) != PREAMBLE) + goto bad1; + + if (cmv->bDirection != MODEMTOHOST) + goto bad1; + + /* FIXME : ADI930 reply wrong preambule (func = 2, sub = 2) to + * the first MEMACESS cmv. Ignore it... + */ + if (cmv->bFunction != sc->cmv_function) { + if (UEA_CHIP_VERSION(sc) == ADI930 + && cmv->bFunction == MAKEFUNCTION(2, 2)) { + cmv->wIndex = cpu_to_le16(sc->cmv_idx); + put_unaligned(cpu_to_le32(sc->cmv_address), &cmv->dwSymbolicAddress); + cmv->wOffsetAddress = cpu_to_le16(sc->cmv_offset); + } + else + goto bad2; + } + + if (cmv->bFunction == MAKEFUNCTION(ADSLDIRECTIVE, MODEMREADY)) { + wake_up_cmv_ack(sc); + return; + } + + /* in case of MEMACCESS */ + if (le16_to_cpu(cmv->wIndex) != sc->cmv_idx || + le32_to_cpu(get_unaligned(&cmv->dwSymbolicAddress)) != + sc->cmv_address + || le16_to_cpu(cmv->wOffsetAddress) != sc->cmv_offset) + goto bad2; + + sc->data = le32_to_cpu(get_unaligned(&cmv->dwData)); + sc->data = sc->data << 16 | sc->data >> 16; + + wake_up_cmv_ack(sc); + return; + +bad2: + uea_err(INS_TO_USBDEV(sc), "unexpected cmv received," + "Function : %d, Subfunction : %d\n", + FUNCTION_TYPE(cmv->bFunction), + FUNCTION_SUBTYPE(cmv->bFunction)); + return; + +bad1: + uea_err(INS_TO_USBDEV(sc), "invalid cmv received, " + "wPreamble %d, bDirection %d\n", + le16_to_cpu(cmv->wPreamble), cmv->bDirection); +} + +/* + * interrupt handler + */ +static void uea_intr(struct urb *urb, struct pt_regs *regs) +{ + struct uea_softc *sc = (struct uea_softc *)urb->context; + struct intr_pkt *intr; + uea_enters(INS_TO_USBDEV(sc)); + + if (urb->status < 0) { + uea_err(INS_TO_USBDEV(sc), "uea_intr() failed with %d\n", + urb->status); + return; + } + + intr = (struct intr_pkt *) urb->transfer_buffer; + + /* device-to-host interrupt */ + if (intr->bType != 0x08 || sc->booting) { + uea_err(INS_TO_USBDEV(sc), "wrong intr\n"); + // rebooting ? + // sc->reset = 1; + goto resubmit; + } + + switch (le16_to_cpu(intr->wInterrupt)) { + case INT_LOADSWAPPAGE: + sc->pageno = intr->bSwapPageNo; + sc->ovl = intr->bOvl >> 4 | intr->bOvl << 4; + schedule_work(&sc->task); + break; + + case INT_INCOMINGCMV: + uea_dispatch_cmv(sc, &intr->u.s2.cmv); + break; + + default: + uea_err(INS_TO_USBDEV(sc), "unknown intr %u\n", + le16_to_cpu(intr->wInterrupt)); + } + +resubmit: + usb_submit_urb(sc->urb_int, GFP_ATOMIC); +} + +/* + * Start the modem : init the data and start kernel thread + */ +static int uea_boot(struct uea_softc *sc) +{ + int ret; + struct intr_pkt *intr; + + uea_enters(INS_TO_USBDEV(sc)); + + INIT_WORK(&sc->task, uea_load_page, sc); + init_waitqueue_head(&sc->sync_q); + init_waitqueue_head(&sc->cmv_ack_wait); + + if (UEA_CHIP_VERSION(sc) == ADI930) + load_XILINX_firmware(sc); + + intr = kmalloc(INTR_PKT_SIZE, GFP_KERNEL); + if (!intr) { + uea_err(INS_TO_USBDEV(sc), + "cannot allocate interrupt package\n"); + uea_leaves(INS_TO_USBDEV(sc)); + return -ENOMEM; + } + + sc->urb_int = usb_alloc_urb(0, GFP_KERNEL); + if (!sc->urb_int) { + uea_err(INS_TO_USBDEV(sc), "cannot allocate interrupt URB\n"); + goto err; + } + + usb_fill_int_urb(sc->urb_int, sc->usb_dev, + usb_rcvintpipe(sc->usb_dev, UEA_INTR_PIPE), + intr, INTR_PKT_SIZE, uea_intr, sc, + sc->usb_dev->actconfig->interface[0]->altsetting[0]. + endpoint[0].desc.bInterval); + + ret = usb_submit_urb(sc->urb_int, GFP_KERNEL); + if (ret < 0) { + uea_err(INS_TO_USBDEV(sc), + "urb submition failed with error %d\n", ret); + goto err1; + } + + sc->kthread = kthread_run(uea_kthread, sc, "ueagle-atm"); + if (sc->kthread == ERR_PTR(-ENOMEM)) { + uea_err(INS_TO_USBDEV(sc), "failed to create thread\n"); + goto err2; + } + + uea_leaves(INS_TO_USBDEV(sc)); + return 0; + +err2: + usb_kill_urb(sc->urb_int); +err1: + kfree(intr); +err: + usb_free_urb(sc->urb_int); + uea_leaves(INS_TO_USBDEV(sc)); + return -ENOMEM; +} + +/* + * Stop the modem : kill kernel thread and free data + */ +static void uea_stop(struct uea_softc *sc) +{ + int ret; + uea_enters(INS_TO_USBDEV(sc)); + ret = kthread_stop(sc->kthread); + uea_info(INS_TO_USBDEV(sc), "kthread finish with status %d\n", ret); + + /* stop any pending boot process */ + flush_scheduled_work(); + + uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL); + + usb_kill_urb(sc->urb_int); + kfree(sc->urb_int->transfer_buffer); + usb_free_urb(sc->urb_int); + + if (sc->dsp_firm) + release_firmware(sc->dsp_firm); + uea_leaves(INS_TO_USBDEV(sc)); +} + +/* syfs interface */ +static struct uea_softc *dev_to_uea(struct device *dev) +{ + struct usb_interface *intf; + struct usbatm_data *usbatm; + + intf = to_usb_interface(dev); + if (!intf) + return NULL; + + usbatm = usb_get_intfdata(intf); + if (!usbatm) + return NULL; + + return usbatm->driver_data; +} + +static ssize_t read_status(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int ret = -ENODEV; + struct uea_softc *sc; + + down(&uea_semaphore); + sc = dev_to_uea(dev); + if (!sc) + goto out; + ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.state); +out: + up(&uea_semaphore); + return ret; +} + +static ssize_t reboot(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret = -ENODEV; + struct uea_softc *sc; + + down(&uea_semaphore); + sc = dev_to_uea(dev); + if (!sc) + goto out; + sc->reset = 1; + ret = count; +out: + up(&uea_semaphore); + return ret; +} + +static DEVICE_ATTR(stat_status, S_IWUGO | S_IRUGO, read_status, reboot); + +static ssize_t read_human_status(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int ret = -ENODEV; + struct uea_softc *sc; + + down(&uea_semaphore); + sc = dev_to_uea(dev); + if (!sc) + goto out; + + switch (GET_STATUS(sc->stats.phy.state)) { + case 0: + ret = sprintf(buf, "Modem is booting\n"); + break; + case 1: + ret = sprintf(buf, "Modem is initializing\n"); + break; + case 2: + ret = sprintf(buf, "Modem is operational\n"); + break; + default: + ret = sprintf(buf, "Modem synchronization failed\n"); + break; + } +out: + up(&uea_semaphore); + return ret; +} + +static DEVICE_ATTR(stat_human_status, S_IWUGO | S_IRUGO, read_human_status, NULL); + +static ssize_t read_delin(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int ret = -ENODEV; + struct uea_softc *sc; + + down(&uea_semaphore); + sc = dev_to_uea(dev); + if (!sc) + goto out; + + if (sc->stats.phy.flags & 0x0C00) + ret = sprintf(buf, "ERROR\n"); + else if (sc->stats.phy.flags & 0x0030) + ret = sprintf(buf, "LOSS\n"); + else + ret = sprintf(buf, "GOOD\n"); +out: + up(&uea_semaphore); + return ret; +} + +static DEVICE_ATTR(stat_delin, S_IWUGO | S_IRUGO, read_delin, NULL); + +#define UEA_ATTR(name, reset) \ + \ +static ssize_t read_##name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + int ret = -ENODEV; \ + struct uea_softc *sc; \ + \ + down(&uea_semaphore); \ + sc = dev_to_uea(dev); \ + if (!sc) \ + goto out; \ + ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.name); \ + if (reset) \ + sc->stats.phy.name = 0; \ +out: \ + up(&uea_semaphore); \ + return ret; \ +} \ + \ +static DEVICE_ATTR(stat_##name, S_IRUGO, read_##name, NULL) + +UEA_ATTR(mflags, 1); +UEA_ATTR(vidcpe, 0); +UEA_ATTR(usrate, 0); +UEA_ATTR(dsrate, 0); +UEA_ATTR(usattenuation, 0); +UEA_ATTR(dsattenuation, 0); +UEA_ATTR(usmargin, 0); +UEA_ATTR(dsmargin, 0); +UEA_ATTR(txflow, 0); +UEA_ATTR(rxflow, 0); +UEA_ATTR(uscorr, 0); +UEA_ATTR(dscorr, 0); +UEA_ATTR(usunc, 0); +UEA_ATTR(dsunc, 0); + +/* Retrieve the device End System Identifier (MAC) */ + +#define htoi(x) (isdigit(x) ? x-'0' : toupper(x)-'A'+10) +static int uea_getesi(struct uea_softc *sc, u_char * esi) +{ + unsigned char mac_str[2 * ETH_ALEN + 1]; + int i; + if (usb_string + (sc->usb_dev, sc->usb_dev->descriptor.iSerialNumber, mac_str, + sizeof(mac_str)) != 2 * ETH_ALEN) + return 1; + + for (i = 0; i < ETH_ALEN; i++) + esi[i] = htoi(mac_str[2 * i]) * 16 + htoi(mac_str[2 * i + 1]); + + return 0; +} + +/* ATM stuff */ +static int uea_atm_open(struct usbatm_data *usbatm, struct atm_dev *atm_dev) +{ + struct uea_softc *sc = usbatm->driver_data; + + return uea_getesi(sc, atm_dev->esi); +} + +static int uea_heavy(struct usbatm_data *usbatm, struct usb_interface *intf) +{ + struct uea_softc *sc = usbatm->driver_data; + + wait_event(sc->sync_q, IS_OPERATIONAL(sc)); + + return 0; + +} + +static int claim_interface(struct usb_device *usb_dev, + struct usbatm_data *usbatm, int ifnum) +{ + int ret; + struct usb_interface *intf = usb_ifnum_to_if(usb_dev, ifnum); + + if (!intf) { + uea_err(usb_dev, "interface %d not found\n", ifnum); + return -ENODEV; + } + + ret = usb_driver_claim_interface(&uea_driver, intf, usbatm); + if (ret != 0) + uea_err(usb_dev, "can't claim interface %d, error %d\n", ifnum, + ret); + return ret; +} + +static void create_fs_entries(struct uea_softc *sc, struct usb_interface *intf) +{ + /* sysfs interface */ + device_create_file(&intf->dev, &dev_attr_stat_status); + device_create_file(&intf->dev, &dev_attr_stat_mflags); + device_create_file(&intf->dev, &dev_attr_stat_human_status); + device_create_file(&intf->dev, &dev_attr_stat_delin); + device_create_file(&intf->dev, &dev_attr_stat_vidcpe); + device_create_file(&intf->dev, &dev_attr_stat_usrate); + device_create_file(&intf->dev, &dev_attr_stat_dsrate); + device_create_file(&intf->dev, &dev_attr_stat_usattenuation); + device_create_file(&intf->dev, &dev_attr_stat_dsattenuation); + device_create_file(&intf->dev, &dev_attr_stat_usmargin); + device_create_file(&intf->dev, &dev_attr_stat_dsmargin); + device_create_file(&intf->dev, &dev_attr_stat_txflow); + device_create_file(&intf->dev, &dev_attr_stat_rxflow); + device_create_file(&intf->dev, &dev_attr_stat_uscorr); + device_create_file(&intf->dev, &dev_attr_stat_dscorr); + device_create_file(&intf->dev, &dev_attr_stat_usunc); + device_create_file(&intf->dev, &dev_attr_stat_dsunc); +} + +static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf, + const struct usb_device_id *id, int *heavy) +{ + struct usb_device *usb = interface_to_usbdev(intf); + struct uea_softc *sc; + int ret, ifnum = intf->altsetting->desc.bInterfaceNumber; + + uea_enters(usb); + + /* interface 0 is for firmware/monitoring */ + if (ifnum != UEA_INTR_IFACE_NO) + return -ENODEV; + + *heavy = sync_wait[modem_index]; + + /* interface 1 is for outbound traffic */ + ret = claim_interface(usb, usbatm, UEA_US_IFACE_NO); + if (ret < 0) + return ret; + + /* ADI930 has only 2 interfaces and inbound traffic + * is on interface 1 + */ + if (UEA_CHIP_VERSION(id) != ADI930) { + /* interface 2 is for inbound traffic */ + ret = claim_interface(usb, usbatm, UEA_DS_IFACE_NO); + if (ret < 0) + return ret; + } + + sc = kzalloc(sizeof(struct uea_softc), GFP_KERNEL); + if (!sc) { + uea_err(INS_TO_USBDEV(sc), "uea_init: not enough memory !\n"); + return -ENOMEM; + } + + sc->usb_dev = usb; + usbatm->driver_data = sc; + sc->usbatm = usbatm; + sc->modem_index = (modem_index < NB_MODEM) ? modem_index++ : 0; + sc->driver_info = id->driver_info; + + ret = uea_boot(sc); + if (ret < 0) { + kfree(sc); + return ret; + } + + create_fs_entries(sc, intf); + return 0; +} + +static void destroy_fs_entries(struct uea_softc *sc, struct usb_interface *intf) +{ + /* sysfs interface */ + device_remove_file(&intf->dev, &dev_attr_stat_status); + device_remove_file(&intf->dev, &dev_attr_stat_mflags); + device_remove_file(&intf->dev, &dev_attr_stat_human_status); + device_remove_file(&intf->dev, &dev_attr_stat_delin); + device_remove_file(&intf->dev, &dev_attr_stat_vidcpe); + device_remove_file(&intf->dev, &dev_attr_stat_usrate); + device_remove_file(&intf->dev, &dev_attr_stat_dsrate); + device_remove_file(&intf->dev, &dev_attr_stat_usattenuation); + device_remove_file(&intf->dev, &dev_attr_stat_dsattenuation); + device_remove_file(&intf->dev, &dev_attr_stat_usmargin); + device_remove_file(&intf->dev, &dev_attr_stat_dsmargin); + device_remove_file(&intf->dev, &dev_attr_stat_txflow); + device_remove_file(&intf->dev, &dev_attr_stat_rxflow); + device_remove_file(&intf->dev, &dev_attr_stat_uscorr); + device_remove_file(&intf->dev, &dev_attr_stat_dscorr); + device_remove_file(&intf->dev, &dev_attr_stat_usunc); + device_remove_file(&intf->dev, &dev_attr_stat_dsunc); +} + +static void uea_unbind(struct usbatm_data *usbatm, struct usb_interface *intf) +{ + struct uea_softc *sc = usbatm->driver_data; + + destroy_fs_entries(sc, intf); + uea_stop(sc); + kfree(sc); +} + +static struct usbatm_driver uea_usbatm_driver = { + .driver_name = "ueagle-atm", + .owner = THIS_MODULE, + .bind = uea_bind, + .atm_start = uea_atm_open, + .unbind = uea_unbind, + .heavy_init = uea_heavy, + .in = UEA_BULK_DATA_PIPE, + .out = UEA_BULK_DATA_PIPE, +}; + +static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *usb = interface_to_usbdev(intf); + + uea_enters(usb); + uea_info(usb, "ADSL device founded vid (%#X) pid (%#X) : %s\n", + le16_to_cpu(usb->descriptor.idVendor), + le16_to_cpu(usb->descriptor.idProduct), + chip_name[UEA_CHIP_VERSION(id)]); + + usb_reset_device(usb); + + if (UEA_IS_PREFIRM(id)) + return uea_load_firmware(usb, UEA_CHIP_VERSION(id)); + + return usbatm_usb_probe(intf, id, &uea_usbatm_driver); +} + +static void uea_disconnect(struct usb_interface *intf) +{ + struct usb_device *usb = interface_to_usbdev(intf); + int ifnum = intf->altsetting->desc.bInterfaceNumber; + uea_enters(usb); + + /* ADI930 has 2 interfaces and eagle 3 interfaces. + * Pre-firmware device has one interface + */ + if (usb->config->desc.bNumInterfaces != 1 && ifnum == 0) { + down(&uea_semaphore); + usbatm_usb_disconnect(intf); + up(&uea_semaphore); + uea_info(usb, "ADSL device removed\n"); + } + + uea_leaves(usb); +} + +/* + * List of supported VID/PID + */ +static const struct usb_device_id uea_ids[] = { + {USB_DEVICE(ELSA_VID, ELSA_PID_PREFIRM), .driver_info = ADI930 | PREFIRM}, + {USB_DEVICE(ELSA_VID, ELSA_PID_PSTFIRM), .driver_info = ADI930 | PSTFIRM}, + {USB_DEVICE(EAGLE_VID, EAGLE_I_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM}, + {USB_DEVICE(EAGLE_VID, EAGLE_I_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM}, + {USB_DEVICE(EAGLE_VID, EAGLE_II_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM}, + {USB_DEVICE(EAGLE_VID, EAGLE_II_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM}, + {USB_DEVICE(EAGLE_VID, EAGLE_IIC_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM}, + {USB_DEVICE(EAGLE_VID, EAGLE_IIC_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM}, + {USB_DEVICE(EAGLE_VID, EAGLE_III_PID_PREFIRM), .driver_info = EAGLE_III | PREFIRM}, + {USB_DEVICE(EAGLE_VID, EAGLE_III_PID_PSTFIRM), .driver_info = EAGLE_III | PSTFIRM}, + {USB_DEVICE(USR_VID, MILLER_A_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM}, + {USB_DEVICE(USR_VID, MILLER_A_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM}, + {USB_DEVICE(USR_VID, MILLER_B_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM}, + {USB_DEVICE(USR_VID, MILLER_B_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM}, + {USB_DEVICE(USR_VID, HEINEKEN_A_PID_PREFIRM),.driver_info = EAGLE_I | PREFIRM}, + {USB_DEVICE(USR_VID, HEINEKEN_A_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM}, + {USB_DEVICE(USR_VID, HEINEKEN_B_PID_PREFIRM),.driver_info = EAGLE_I | PREFIRM}, + {USB_DEVICE(USR_VID, HEINEKEN_B_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM}, + {} +}; + +/* + * USB driver descriptor + */ +static struct usb_driver uea_driver = { + .owner = THIS_MODULE, + .name = "ueagle-atm", + .id_table = uea_ids, + .probe = uea_probe, + .disconnect = uea_disconnect, +}; + +MODULE_DEVICE_TABLE(usb, uea_ids); + +/** + * uea_init - Initialize the module. + * Register to USB subsystem + */ +static int __init uea_init(void) +{ + printk(KERN_INFO "[ueagle-atm] driver " EAGLEUSBVERSION " loaded\n"); + + usb_register(&uea_driver); + + return 0; +} + +module_init(uea_init); + +/** + * uea_exit - Destroy module + * Deregister with USB subsystem + */ +static void __exit uea_exit(void) +{ + /* + * This calls automatically the uea_disconnect method if necessary: + */ + usb_deregister(&uea_driver); + + printk(KERN_INFO "[ueagle-atm] driver unloaded\n"); +} + +module_exit(uea_exit); + +MODULE_AUTHOR("Damien Bergamini/Matthieu Castet/Stanislaw W. Gruszka"); +MODULE_DESCRIPTION("ADI 930/Eagle USB ADSL Modem driver"); +MODULE_LICENSE("Dual BSD/GPL"); -- cgit v1.2.3 From 8d7802ed3c617120863f84346638d1cf1c96137b Mon Sep 17 00:00:00 2001 From: matthieu castet Date: Tue, 8 Nov 2005 00:02:30 +0100 Subject: [PATCH] USB: Eagle and ADI 930 usb adsl modem driver fix More care on loading firmware, take into account fw->size can't be zero. Signed-off-by: Matthieu CASTET Signed-off-by: Greg Kroah-Hartman --- drivers/usb/atm/ueagle-atm.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index 3e2475c666ab..be08e16df09f 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -426,14 +426,14 @@ static void uea_upload_pre_firmware(const struct firmware *fw_entry, void *conte pfw = fw_entry->data; size = fw_entry->size; + if (size < 4) + goto err_fw_corrupted; crc = FW_GET_LONG(pfw); pfw += 4; size -= 4; - if (crc32_be(0, pfw, size) != crc) { - uea_err(usb, "firmware is corrupted\n"); - goto err; - } + if (crc32_be(0, pfw, size) != crc) + goto err_fw_corrupted; /* * Start to upload formware : send reset @@ -446,9 +446,14 @@ static void uea_upload_pre_firmware(const struct firmware *fw_entry, void *conte goto err; } - while (size > 0) { + while (size > 3) { u8 len = FW_GET_BYTE(pfw); u16 add = FW_GET_WORD(pfw + 1); + + size -= len + 3; + if (size < 0) + goto err_fw_corrupted; + ret = uea_send_modem_cmd(usb, add, len, pfw + 3); if (ret < 0) { uea_err(usb, "uploading firmware data failed " @@ -456,9 +461,11 @@ static void uea_upload_pre_firmware(const struct firmware *fw_entry, void *conte goto err; } pfw += len + 3; - size -= len + 3; } + if (size != 0) + goto err_fw_corrupted; + /* * Tell the modem we finish : de-assert reset */ @@ -469,6 +476,11 @@ static void uea_upload_pre_firmware(const struct firmware *fw_entry, void *conte else uea_info(usb, "firmware uploaded\n"); + uea_leaves(usb); + return; + +err_fw_corrupted: + uea_err(usb, "firmware is corrupted\n"); err: uea_leaves(usb); } @@ -522,10 +534,6 @@ static int check_dsp(u8 *dsp, unsigned int len) u32 pageoffset; unsigned int i, j, p, pp; - /* enough space for pagecount? */ - if (len < 1) - return 1; - pagecount = FW_GET_BYTE(dsp); p = 1; -- cgit v1.2.3 From 2c1c3c4cd5f796b1912c65aaf3bf48c0ddf11f5e Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 7 Nov 2005 15:24:46 -0800 Subject: [PATCH] USB: EHCI updates (4/4) driver model wakeup flags This teaches the EHCI driver to use the new driver model wakeup flags, replacing the similar ones in the HCD glue. It also adds a workaround for the current glitch whereby PCI init doesn't init the wakeup flags from the PCI PM capabilities. (EHCI controllers don't worry about legacy mode; the PCI PM capability would always do the job.) Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/ehci-hub.c | 4 ++-- drivers/usb/host/ehci-pci.c | 11 ++++++++++- 3 files changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 29f52a44b928..dd871023265c 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -624,7 +624,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs) } /* remote wakeup [4.3.1] */ - if ((status & STS_PCD) && hcd->remote_wakeup) { + if ((status & STS_PCD) && device_may_wakeup(&hcd->self.root_hub->dev)) { unsigned i = HCS_N_PORTS (ehci->hcs_params); /* resume root hub? */ diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 82caf336e9b6..69b0b9be7a64 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -59,7 +59,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) if ((t1 & PORT_PE) && !(t1 & PORT_OWNER)) t2 |= PORT_SUSPEND; - if (hcd->remote_wakeup) + if (device_may_wakeup(&hcd->self.root_hub->dev)) t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E; else t2 &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E); @@ -517,7 +517,7 @@ static int ehci_hub_control ( if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) goto error; - if (hcd->remote_wakeup) + if (device_may_wakeup(&hcd->self.root_hub->dev)) temp |= PORT_WAKE_BITS; writel (temp | PORT_SUSPEND, &ehci->regs->port_status [wIndex]); diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 13f73a836e45..ac088bc72f1c 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -210,7 +210,16 @@ static int ehci_pci_setup(struct usb_hcd *hcd) /* Serial Bus Release Number is at PCI 0x60 offset */ pci_read_config_byte(pdev, 0x60, &ehci->sbrn); - /* REVISIT: per-port wake capability (PCI 0x62) currently unused */ + /* Workaround current PCI init glitch: wakeup bits aren't + * being set from PCI PM capability. + */ + if (!device_can_wakeup(&pdev->dev)) { + u16 port_wake; + + pci_read_config_word(pdev, 0x62, &port_wake); + if (port_wake & 0x0001) + device_init_wakeup(&pdev->dev, 1); + } retval = ehci_pci_reinit(ehci, pdev); done: -- cgit v1.2.3 From d97cc2f2e938547a47daef29bc10ab38600a3310 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Dec 2005 17:05:18 -0800 Subject: [PATCH] USB: ehci fix driver model wakeup flags On some systems, EHCI seems to be getting IRQs too early during driver setup ... before the root hub is allocated, in particular, making trouble for any code chasing down root hub pointers! In this case, it seems to be safe to just ignore the root hub setting. Thanks to Rafael J. Wysocki for getting this properly tested. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index dd871023265c..b5b57e957e5f 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -624,7 +624,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs) } /* remote wakeup [4.3.1] */ - if ((status & STS_PCD) && device_may_wakeup(&hcd->self.root_hub->dev)) { + if (status & STS_PCD) { unsigned i = HCS_N_PORTS (ehci->hcs_params); /* resume root hub? */ -- cgit v1.2.3 From 0c8624f91d91df7cdeb9b2dace3269b8788c845f Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 7 Nov 2005 15:31:25 -0800 Subject: [PATCH] USB: wakeup flag updates (1/3) sl811-hcd This makes the SL811 HCD use the driver model wakeup flags for its controller, not the flags in the HCD glue (which will be removed). From: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/host/sl811-hcd.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- drivers/usb/host/sl811-hcd.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index a7722a6a5a5b..5a28e6115892 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1581,7 +1581,9 @@ sl811h_start(struct usb_hcd *hcd) hcd->state = HC_STATE_RUNNING; if (sl811->board) { - hcd->can_wakeup = sl811->board->can_wakeup; + if (!device_can_wakeup(hcd->self.controller)) + device_init_wakeup(hcd->self.controller, + sl811->board->can_wakeup); hcd->power_budget = sl811->board->power * 2; } @@ -1805,7 +1807,7 @@ sl811h_resume(struct platform_device *dev) * let's assume it'd only be powered to enable remote wakeup. */ if (dev->dev.power.power_state.event == PM_EVENT_SUSPEND - || !hcd->can_wakeup) { + || !device_can_wakeup(&hcd->self.root_hub->dev)) { sl811->port1 = 0; port_power(sl811, 1); return 0; -- cgit v1.2.3 From baefbc39d8e23942cc10db92f5bc42e3476f6bc1 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 7 Nov 2005 15:34:41 -0800 Subject: [PATCH] USB: wakeup flag updates (2/3) uhci-hcd This makes UHCI stop using the HCD glue wakeup flags to report whether the controller can wake the system. The existing code was wrong anyway; having a PCI PM capability doesn't imply it reports PME# is supported. I skimmed Intel's ICH7 datasheet and that basically says the wakeup signaling gets routed only through ACPI registers. (On the other hand, many VIA chips provide the PCI PM capabilities...) I think that doing this correctly with UHCI is going to require the ACPI folk to associate the /proc/acpi/wakeup identifiers (and wakeup enable/disable flags) with the relevant /sys/devices/pci*/... devices. From: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-hcd.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 79efaf7d86a3..5589d4010e36 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -478,8 +478,6 @@ static int uhci_start(struct usb_hcd *hcd) struct dentry *dentry; hcd->uses_new_polling = 1; - if (pci_find_capability(to_pci_dev(uhci_dev(uhci)), PCI_CAP_ID_PM)) - hcd->can_wakeup = 1; /* Assume it supports PME# */ dentry = debugfs_create_file(hcd->self.bus_name, S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, uhci, -- cgit v1.2.3 From 704aa0b7a9744d5f2b5c1fa68b826fcca73a2104 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 7 Nov 2005 15:38:24 -0800 Subject: [PATCH] USB: wakeup flag updates (3/3) isp116x-hcd This makes the ISP116x HCD use the driver model wakeup flags for its controller, not the flags in the HCD glue (which will be removed). Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp116x-hcd.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 342cfadc999a..c95af116f9e7 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1378,7 +1378,8 @@ static int isp116x_start(struct usb_hcd *hcd) val = 0; if (board->remote_wakeup_enable) { - hcd->can_wakeup = 1; + if (!device_can_wakeup(hcd->self.controller)) + device_init_wakeup(hcd->self.controller, 1); val |= RH_HS_DRWE; } isp116x_write_reg32(isp116x, HCRHSTATUS, val); @@ -1428,7 +1429,7 @@ static int isp116x_bus_suspend(struct usb_hcd *hcd) hcd->state = HC_STATE_QUIESCING; val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE); val |= HCCONTROL_USB_SUSPEND; - if (hcd->remote_wakeup) + if (device_may_wakeup(&hcd->self.root_hub->dev)) val |= HCCONTROL_RWE; /* Wait for usb transfers to finish */ mdelay(2); -- cgit v1.2.3 From c9a50cc9318772e62d56f2a9172bdfda72bdacbe Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 7 Nov 2005 20:45:20 -0800 Subject: [PATCH] USB: hcd uses EXTRA_CFLAGS for -DDEBUG This modifies the HCD builds to automatically "-DDEBUG" if CONFIG_USB_DEBUG is selected. It's just a minor source code cleanup, guaranteeing consistency. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Makefile | 4 ++++ drivers/usb/host/ehci-hcd.c | 7 ------- drivers/usb/host/ohci-hcd.c | 7 ------- drivers/usb/host/pci-quirks.c | 6 ------ drivers/usb/host/sl811-hcd.c | 7 ------- drivers/usb/host/sl811_cs.c | 5 +++-- drivers/usb/host/uhci-hcd.c | 5 ----- 7 files changed, 7 insertions(+), 34 deletions(-) diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 58321d3f314c..e3020f4b17be 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -2,6 +2,10 @@ # Makefile for USB Host Controller Drivers # +ifeq ($(CONFIG_USB_DEBUG),y) + EXTRA_CFLAGS += -DDEBUG +endif + obj-$(CONFIG_PCI) += pci-quirks.o obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index b5b57e957e5f..9dd3d14c64f3 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -17,13 +17,6 @@ */ #include - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif - #include #include #include diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index bf1d9abc07ac..e3af3ac4416a 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -75,13 +75,6 @@ */ #include - -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#else -# undef DEBUG -#endif - #include #include #include diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index e46528c825bf..3ef2c0cdf1db 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -9,12 +9,6 @@ */ #include -#ifdef CONFIG_USB_DEBUG -#define DEBUG -#else -#undef DEBUG -#endif - #include #include #include diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 5a28e6115892..3a9cd4607962 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -32,13 +32,6 @@ #undef PACKET_TRACE #include - -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#else -# undef DEBUG -#endif - #include #include #include diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index e73faf831b24..5056b7459994 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -38,7 +38,7 @@ MODULE_LICENSE("GPL"); /* MACROS */ /*====================================================================*/ -#if defined(DEBUG) || defined(CONFIG_USB_DEBUG) || defined(PCMCIA_DEBUG) +#if defined(DEBUG) || defined(PCMCIA_DEBUG) static int pc_debug = 0; module_param(pc_debug, int, 0644); @@ -129,7 +129,8 @@ static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq) resources[2].end = base_addr + 1; /* The driver core will probe for us. We know sl811-hcd has been - * initialized already because of the link order dependency. + * initialized already because of the link order dependency created + * by referencing "sl811h_driver". */ platform_dev.name = sl811h_driver.name; return platform_device_register(&platform_dev); diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 5589d4010e36..1c0394cb3c89 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -23,11 +23,6 @@ */ #include -#ifdef CONFIG_USB_DEBUG -#define DEBUG -#else -#undef DEBUG -#endif #include #include #include -- cgit v1.2.3 From 87c4252a35310fdbb2aabb880a39b83f83cadf62 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 9 Nov 2005 16:59:56 -0500 Subject: [PATCH] USB: file-storage gadget: Add reference count for children This patch (as601) adds a proper reference count to the file-storage gadget's main data structure, to keep track of references held by child devices (LUNs in this case). Before this, the driver would wait for each child to be released before unbinding. While there's nothing really wrong with that (you can't create a hang by doing "rmmod g_file_storage Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/file_storage.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index ea09aaa3cab6..f6f0b2aa1145 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -224,6 +224,7 @@ #include #include #include +#include #include #include #include @@ -631,6 +632,9 @@ struct fsg_dev { /* filesem protects: backing files in use */ struct rw_semaphore filesem; + /* reference counting: wait until all LUNs are released */ + struct kref ref; + struct usb_ep *ep0; // Handy copy of gadget->ep0 struct usb_request *ep0req; // For control responses volatile unsigned int ep0_req_tag; @@ -694,7 +698,6 @@ struct fsg_dev { unsigned int nluns; struct lun *luns; struct lun *curlun; - struct completion lun_released; }; typedef void (*fsg_routine_t)(struct fsg_dev *); @@ -3642,11 +3645,19 @@ static DEVICE_ATTR(file, 0444, show_file, NULL); /*-------------------------------------------------------------------------*/ +static void fsg_release(struct kref *ref) +{ + struct fsg_dev *fsg = container_of(ref, struct fsg_dev, ref); + + kfree(fsg->luns); + kfree(fsg); +} + static void lun_release(struct device *dev) { struct fsg_dev *fsg = (struct fsg_dev *) dev_get_drvdata(dev); - complete(&fsg->lun_released); + kref_put(&fsg->ref, fsg_release); } static void fsg_unbind(struct usb_gadget *gadget) @@ -3660,14 +3671,12 @@ static void fsg_unbind(struct usb_gadget *gadget) clear_bit(REGISTERED, &fsg->atomic_bitflags); /* Unregister the sysfs attribute files and the LUNs */ - init_completion(&fsg->lun_released); for (i = 0; i < fsg->nluns; ++i) { curlun = &fsg->luns[i]; if (curlun->registered) { device_remove_file(&curlun->dev, &dev_attr_ro); device_remove_file(&curlun->dev, &dev_attr_file); device_unregister(&curlun->dev); - wait_for_completion(&fsg->lun_released); curlun->registered = 0; } } @@ -3846,6 +3855,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) curlun->dev.release = lun_release; device_create_file(&curlun->dev, &dev_attr_ro); device_create_file(&curlun->dev, &dev_attr_file); + kref_get(&fsg->ref); } if (file[i] && *file[i]) { @@ -4061,6 +4071,7 @@ static int __init fsg_alloc(void) return -ENOMEM; spin_lock_init(&fsg->lock); init_rwsem(&fsg->filesem); + kref_init(&fsg->ref); init_waitqueue_head(&fsg->thread_wqh); init_completion(&fsg->thread_notifier); @@ -4069,13 +4080,6 @@ static int __init fsg_alloc(void) } -static void fsg_free(struct fsg_dev *fsg) -{ - kfree(fsg->luns); - kfree(fsg); -} - - static int __init fsg_init(void) { int rc; @@ -4085,7 +4089,7 @@ static int __init fsg_init(void) return rc; fsg = the_fsg; if ((rc = usb_gadget_register_driver(&fsg_driver)) != 0) - fsg_free(fsg); + kref_put(&fsg->ref, fsg_release); return rc; } module_init(fsg_init); @@ -4103,6 +4107,6 @@ static void __exit fsg_cleanup(void) wait_for_completion(&fsg->thread_notifier); close_all_backing_files(fsg); - fsg_free(fsg); + kref_put(&fsg->ref, fsg_release); } module_exit(fsg_cleanup); -- cgit v1.2.3 From 4a1728a28a193aa388900714bbb1f375e08a6d8e Mon Sep 17 00:00:00 2001 From: Petko Manolov Date: Tue, 15 Nov 2005 09:48:23 +0200 Subject: [PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/net/pegasus.c | 106 ++++++++++++++++++++++------------------------ 1 file changed, 51 insertions(+), 55 deletions(-) diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c index 683e3df5d607..d8c7adabf201 100644 --- a/drivers/usb/net/pegasus.c +++ b/drivers/usb/net/pegasus.c @@ -45,7 +45,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v0.6.12 (2005/01/13)" +#define DRIVER_VERSION "v0.6.13 (2005/11/13)" #define DRIVER_AUTHOR "Petko Manolov " #define DRIVER_DESC "Pegasus/Pegasus II USB Ethernet driver" @@ -113,7 +113,7 @@ static void ctrl_callback(struct urb *urb, struct pt_regs *regs) break; default: if (netif_msg_drv(pegasus)) - dev_err(&pegasus->intf->dev, "%s, status %d\n", + dev_dbg(&pegasus->intf->dev, "%s, status %d\n", __FUNCTION__, urb->status); } pegasus->flags &= ~ETH_REGS_CHANGED; @@ -308,9 +308,9 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd) __le16 regdi; int ret; - ret = set_register(pegasus, PhyCtrl, 0); - ret = set_registers(pegasus, PhyAddr, sizeof (data), data); - ret = set_register(pegasus, PhyCtrl, (indx | PHY_READ)); + set_register(pegasus, PhyCtrl, 0); + set_registers(pegasus, PhyAddr, sizeof (data), data); + set_register(pegasus, PhyCtrl, (indx | PHY_READ)); for (i = 0; i < REG_TIMEOUT; i++) { ret = get_registers(pegasus, PhyCtrl, 1, data); if (data[0] & PHY_DONE) @@ -319,12 +319,12 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd) if (i < REG_TIMEOUT) { ret = get_registers(pegasus, PhyData, 2, ®di); *regd = le16_to_cpu(regdi); - return 1; + return ret; } if (netif_msg_drv(pegasus)) dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__); - return 0; + return ret; } static int mdio_read(struct net_device *dev, int phy_id, int loc) @@ -344,20 +344,20 @@ static int write_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 regd) data[1] = (u8) regd; data[2] = (u8) (regd >> 8); - ret = set_register(pegasus, PhyCtrl, 0); - ret = set_registers(pegasus, PhyAddr, sizeof(data), data); - ret = set_register(pegasus, PhyCtrl, (indx | PHY_WRITE)); + set_register(pegasus, PhyCtrl, 0); + set_registers(pegasus, PhyAddr, sizeof(data), data); + set_register(pegasus, PhyCtrl, (indx | PHY_WRITE)); for (i = 0; i < REG_TIMEOUT; i++) { ret = get_registers(pegasus, PhyCtrl, 1, data); if (data[0] & PHY_DONE) break; } if (i < REG_TIMEOUT) - return 0; + return ret; if (netif_msg_drv(pegasus)) dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__); - return 1; + return -ETIMEDOUT; } static void mdio_write(struct net_device *dev, int phy_id, int loc, int val) @@ -374,9 +374,9 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata) __le16 retdatai; int ret; - ret = set_register(pegasus, EpromCtrl, 0); - ret = set_register(pegasus, EpromOffset, index); - ret = set_register(pegasus, EpromCtrl, EPROM_READ); + set_register(pegasus, EpromCtrl, 0); + set_register(pegasus, EpromOffset, index); + set_register(pegasus, EpromCtrl, EPROM_READ); for (i = 0; i < REG_TIMEOUT; i++) { ret = get_registers(pegasus, EpromCtrl, 1, &tmp); @@ -386,12 +386,12 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata) if (i < REG_TIMEOUT) { ret = get_registers(pegasus, EpromData, 2, &retdatai); *retdata = le16_to_cpu(retdatai); - return 0; + return ret; } if (netif_msg_drv(pegasus)) dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__); - return -1; + return -ETIMEDOUT; } #ifdef PEGASUS_WRITE_EEPROM @@ -400,8 +400,8 @@ static inline void enable_eprom_write(pegasus_t * pegasus) __u8 tmp; int ret; - ret = get_registers(pegasus, EthCtrl2, 1, &tmp); - ret = set_register(pegasus, EthCtrl2, tmp | EPROM_WR_ENABLE); + get_registers(pegasus, EthCtrl2, 1, &tmp); + set_register(pegasus, EthCtrl2, tmp | EPROM_WR_ENABLE); } static inline void disable_eprom_write(pegasus_t * pegasus) @@ -409,9 +409,9 @@ static inline void disable_eprom_write(pegasus_t * pegasus) __u8 tmp; int ret; - ret = get_registers(pegasus, EthCtrl2, 1, &tmp); - ret = set_register(pegasus, EpromCtrl, 0); - ret = set_register(pegasus, EthCtrl2, tmp & ~EPROM_WR_ENABLE); + get_registers(pegasus, EthCtrl2, 1, &tmp); + set_register(pegasus, EpromCtrl, 0); + set_register(pegasus, EthCtrl2, tmp & ~EPROM_WR_ENABLE); } static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data) @@ -420,11 +420,11 @@ static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data) __u8 tmp, d[4] = { 0x3f, 0, 0, EPROM_WRITE }; int ret; - ret = set_registers(pegasus, EpromOffset, 4, d); + set_registers(pegasus, EpromOffset, 4, d); enable_eprom_write(pegasus); - ret = set_register(pegasus, EpromOffset, index); - ret = set_registers(pegasus, EpromData, 2, &data); - ret = set_register(pegasus, EpromCtrl, EPROM_WRITE); + set_register(pegasus, EpromOffset, index); + set_registers(pegasus, EpromData, 2, &data); + set_register(pegasus, EpromCtrl, EPROM_WRITE); for (i = 0; i < REG_TIMEOUT; i++) { ret = get_registers(pegasus, EpromCtrl, 1, &tmp); @@ -433,10 +433,10 @@ static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data) } disable_eprom_write(pegasus); if (i < REG_TIMEOUT) - return 0; + return ret; if (netif_msg_drv(pegasus)) dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__); - return -1; + return -ETIMEDOUT; } #endif /* PEGASUS_WRITE_EEPROM */ @@ -454,10 +454,9 @@ static inline void get_node_id(pegasus_t * pegasus, __u8 * id) static void set_ethernet_addr(pegasus_t * pegasus) { __u8 node_id[6]; - int ret; get_node_id(pegasus, node_id); - ret = set_registers(pegasus, EthID, sizeof (node_id), node_id); + set_registers(pegasus, EthID, sizeof (node_id), node_id); memcpy(pegasus->net->dev_addr, node_id, sizeof (node_id)); } @@ -465,30 +464,29 @@ static inline int reset_mac(pegasus_t * pegasus) { __u8 data = 0x8; int i; - int ret; - ret = set_register(pegasus, EthCtrl1, data); + set_register(pegasus, EthCtrl1, data); for (i = 0; i < REG_TIMEOUT; i++) { - ret = get_registers(pegasus, EthCtrl1, 1, &data); + get_registers(pegasus, EthCtrl1, 1, &data); if (~data & 0x08) { if (loopback & 1) break; if (mii_mode && (pegasus->features & HAS_HOME_PNA)) - ret = set_register(pegasus, Gpio1, 0x34); + set_register(pegasus, Gpio1, 0x34); else - ret = set_register(pegasus, Gpio1, 0x26); - ret = set_register(pegasus, Gpio0, pegasus->features); - ret = set_register(pegasus, Gpio0, DEFAULT_GPIO_SET); + set_register(pegasus, Gpio1, 0x26); + set_register(pegasus, Gpio0, pegasus->features); + set_register(pegasus, Gpio0, DEFAULT_GPIO_SET); break; } } if (i == REG_TIMEOUT) - return 1; + return -ETIMEDOUT; if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS || usb_dev_id[pegasus->dev_index].vendor == VENDOR_DLINK) { - ret = set_register(pegasus, Gpio0, 0x24); - ret = set_register(pegasus, Gpio0, 0x26); + set_register(pegasus, Gpio0, 0x24); + set_register(pegasus, Gpio0, 0x26); } if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_ELCON) { __u16 auxmode; @@ -527,7 +525,7 @@ static int enable_net_traffic(struct net_device *dev, struct usb_device *usb) write_mii_word(pegasus, 0, 0x1b, auxmode | 4); } - return 0; + return ret; } static void fill_skb_pool(pegasus_t * pegasus) @@ -881,9 +879,8 @@ static struct net_device_stats *pegasus_netdev_stats(struct net_device *dev) static inline void disable_net_traffic(pegasus_t * pegasus) { int tmp = 0; - int ret; - ret = set_registers(pegasus, EthCtrl0, 2, &tmp); + set_registers(pegasus, EthCtrl0, 2, &tmp); } static inline void get_interrupt_interval(pegasus_t * pegasus) @@ -1206,18 +1203,17 @@ static __u8 mii_phy_probe(pegasus_t * pegasus) static inline void setup_pegasus_II(pegasus_t * pegasus) { __u8 data = 0xa5; - int ret; - ret = set_register(pegasus, Reg1d, 0); - ret = set_register(pegasus, Reg7b, 1); + set_register(pegasus, Reg1d, 0); + set_register(pegasus, Reg7b, 1); mdelay(100); if ((pegasus->features & HAS_HOME_PNA) && mii_mode) - ret = set_register(pegasus, Reg7b, 0); + set_register(pegasus, Reg7b, 0); else - ret = set_register(pegasus, Reg7b, 2); + set_register(pegasus, Reg7b, 2); - ret = set_register(pegasus, 0x83, data); - ret = get_registers(pegasus, 0x83, 1, &data); + set_register(pegasus, 0x83, data); + get_registers(pegasus, 0x83, 1, &data); if (data == 0xa5) { pegasus->chip = 0x8513; @@ -1225,14 +1221,14 @@ static inline void setup_pegasus_II(pegasus_t * pegasus) pegasus->chip = 0; } - ret = set_register(pegasus, 0x80, 0xc0); - ret = set_register(pegasus, 0x83, 0xff); - ret = set_register(pegasus, 0x84, 0x01); + set_register(pegasus, 0x80, 0xc0); + set_register(pegasus, 0x83, 0xff); + set_register(pegasus, 0x84, 0x01); if (pegasus->features & HAS_HOME_PNA && mii_mode) - ret = set_register(pegasus, Reg81, 6); + set_register(pegasus, Reg81, 6); else - ret = set_register(pegasus, Reg81, 2); + set_register(pegasus, Reg81, 2); } -- cgit v1.2.3 From a4f81a61ebba5953cba1e76f66423a7eca4a5ee4 Mon Sep 17 00:00:00 2001 From: "A.YOSHIYAMA" Date: Tue, 15 Nov 2005 09:55:18 +0200 Subject: [PATCH] USB: usb-net: new device ID passed through module parameter adds new module parameter "devid" that points to a string with format "device_name:vendor_id:device_id:flags". if provided at module load time, this string is being parsed and a new entry is created in usb_dev_id[] and pegasus_ids[] so the new device can later be recognized by the probe routine. this might be helpful for someone who don't know/wish to build new module/kernel, but want to use his new usb-to-eth device that is not yet listed in pegasus.h Signed-off-by: Petko Manolov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/net/pegasus.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c index d8c7adabf201..156a2f1cb39a 100644 --- a/drivers/usb/net/pegasus.c +++ b/drivers/usb/net/pegasus.c @@ -57,12 +57,14 @@ static const char driver_name[] = "pegasus"; static int loopback = 0; static int mii_mode = 0; +static char *devid=NULL; static struct usb_eth_dev usb_dev_id[] = { #define PEGASUS_DEV(pn, vid, pid, flags) \ {.name = pn, .vendor = vid, .device = pid, .private = flags}, #include "pegasus.h" #undef PEGASUS_DEV + {NULL, 0, 0, 0}, {NULL, 0, 0, 0} }; @@ -71,6 +73,7 @@ static struct usb_device_id pegasus_ids[] = { {.match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = vid, .idProduct = pid}, #include "pegasus.h" #undef PEGASUS_DEV + {}, {} }; @@ -79,8 +82,10 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(loopback, bool, 0); module_param(mii_mode, bool, 0); +module_param(devid, charp, 0); MODULE_PARM_DESC(loopback, "Enable MAC loopback mode (bit 0)"); MODULE_PARM_DESC(mii_mode, "Enable HomePNA mode (bit 0),default=MII mode = 0"); +MODULE_PARM_DESC(devid, "The format is: 'DEV_name:VendorID:DeviceID:Flags'"); /* use ethtool to change the level for any given device */ static int msg_level = -1; @@ -1410,9 +1415,42 @@ static struct usb_driver pegasus_driver = { .resume = pegasus_resume, }; +static void parse_id(char *id) +{ + unsigned int vendor_id=0, device_id=0, flags=0, i=0; + char *token, *name=NULL; + + if ((token = strsep(&id, ":")) != NULL) + name = token; + /* name now points to a null terminated string*/ + if ((token = strsep(&id, ":")) != NULL) + vendor_id = simple_strtoul(token, NULL, 16); + if ((token = strsep(&id, ":")) != NULL) + device_id = simple_strtoul(token, NULL, 16); + flags = simple_strtoul(id, NULL, 16); + pr_info("%s: new device %s, vendor ID 0x%04x, device ID 0x%04x, flags: 0x%x\n", + driver_name, name, vendor_id, device_id, flags); + + if (vendor_id > 0x10000 || vendor_id == 0) + return; + if (device_id > 0x10000 || device_id == 0) + return; + + for (i=0; usb_dev_id[i].name; i++); + usb_dev_id[i].name = name; + usb_dev_id[i].vendor = vendor_id; + usb_dev_id[i].device = device_id; + usb_dev_id[i].private = flags; + pegasus_ids[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE; + pegasus_ids[i].idVendor = vendor_id; + pegasus_ids[i].idProduct = device_id; +} + static int __init pegasus_init(void) { pr_info("%s: %s, " DRIVER_DESC "\n", driver_name, DRIVER_VERSION); + if (devid) + parse_id(devid); pegasus_workqueue = create_singlethread_workqueue("pegasus"); if (!pegasus_workqueue) return -ENOMEM; -- cgit v1.2.3 From 8364d6b0be2dbbf162c6aea79615b5025a0d67c2 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 14 Nov 2005 12:16:30 -0500 Subject: [PATCH] USB: dummy_hcd: rename variables The recent platform_device update has reintroduced into dummy_hcd.c the dreaded dev->dev syndrome. This harkens back to when an earlier version of that driver included the unforgettable line: dev->dev.dev.driver_data = dev; This patch (as602) renames the platform_device variables to "pdev", in the hope of reducing confusion. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/dummy_hcd.c | 50 +++++++++++++++++++++--------------------- 1 file changed, 25 insertions(+), 25 deletions(-) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index c655d46c8aed..4932b07b316d 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -896,7 +896,7 @@ dummy_gadget_release (struct device *dev) #endif } -static int dummy_udc_probe (struct platform_device *dev) +static int dummy_udc_probe (struct platform_device *pdev) { struct dummy *dum = the_controller; int rc; @@ -909,7 +909,7 @@ static int dummy_udc_probe (struct platform_device *dev) dum->gadget.is_otg = (dummy_to_hcd(dum)->self.otg_port != 0); strcpy (dum->gadget.dev.bus_id, "gadget"); - dum->gadget.dev.parent = &dev->dev; + dum->gadget.dev.parent = &pdev->dev; dum->gadget.dev.release = dummy_gadget_release; rc = device_register (&dum->gadget.dev); if (rc < 0) @@ -919,47 +919,47 @@ static int dummy_udc_probe (struct platform_device *dev) usb_bus_get (&dummy_to_hcd (dum)->self); #endif - platform_set_drvdata (dev, dum); + platform_set_drvdata (pdev, dum); device_create_file (&dum->gadget.dev, &dev_attr_function); return rc; } -static int dummy_udc_remove (struct platform_device *dev) +static int dummy_udc_remove (struct platform_device *pdev) { - struct dummy *dum = platform_get_drvdata (dev); + struct dummy *dum = platform_get_drvdata (pdev); - platform_set_drvdata (dev, NULL); + platform_set_drvdata (pdev, NULL); device_remove_file (&dum->gadget.dev, &dev_attr_function); device_unregister (&dum->gadget.dev); return 0; } -static int dummy_udc_suspend (struct platform_device *dev, pm_message_t state) +static int dummy_udc_suspend (struct platform_device *pdev, pm_message_t state) { - struct dummy *dum = platform_get_drvdata(dev); + struct dummy *dum = platform_get_drvdata(pdev); - dev_dbg (&dev->dev, "%s\n", __FUNCTION__); + dev_dbg (&pdev->dev, "%s\n", __FUNCTION__); spin_lock_irq (&dum->lock); dum->udc_suspended = 1; set_link_state (dum); spin_unlock_irq (&dum->lock); - dev->dev.power.power_state = state; + pdev->dev.power.power_state = state; usb_hcd_poll_rh_status (dummy_to_hcd (dum)); return 0; } -static int dummy_udc_resume (struct platform_device *dev) +static int dummy_udc_resume (struct platform_device *pdev) { - struct dummy *dum = platform_get_drvdata(dev); + struct dummy *dum = platform_get_drvdata(pdev); - dev_dbg (&dev->dev, "%s\n", __FUNCTION__); + dev_dbg (&pdev->dev, "%s\n", __FUNCTION__); spin_lock_irq (&dum->lock); dum->udc_suspended = 0; set_link_state (dum); spin_unlock_irq (&dum->lock); - dev->dev.power.power_state = PMSG_ON; + pdev->dev.power.power_state = PMSG_ON; usb_hcd_poll_rh_status (dummy_to_hcd (dum)); return 0; } @@ -1899,14 +1899,14 @@ static const struct hc_driver dummy_hcd = { .bus_resume = dummy_bus_resume, }; -static int dummy_hcd_probe (struct platform_device *dev) +static int dummy_hcd_probe(struct platform_device *pdev) { struct usb_hcd *hcd; int retval; - dev_info(&dev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc); + dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc); - hcd = usb_create_hcd (&dummy_hcd, &dev->dev, dev->dev.bus_id); + hcd = usb_create_hcd(&dummy_hcd, &pdev->dev, pdev->dev.bus_id); if (!hcd) return -ENOMEM; the_controller = hcd_to_dummy (hcd); @@ -1919,34 +1919,34 @@ static int dummy_hcd_probe (struct platform_device *dev) return retval; } -static int dummy_hcd_remove (struct platform_device *dev) +static int dummy_hcd_remove (struct platform_device *pdev) { struct usb_hcd *hcd; - hcd = platform_get_drvdata (dev); + hcd = platform_get_drvdata (pdev); usb_remove_hcd (hcd); usb_put_hcd (hcd); the_controller = NULL; return 0; } -static int dummy_hcd_suspend (struct platform_device *dev, pm_message_t state) +static int dummy_hcd_suspend (struct platform_device *pdev, pm_message_t state) { struct usb_hcd *hcd; - dev_dbg (&dev->dev, "%s\n", __FUNCTION__); - hcd = platform_get_drvdata (dev); + dev_dbg (&pdev->dev, "%s\n", __FUNCTION__); + hcd = platform_get_drvdata (pdev); hcd->state = HC_STATE_SUSPENDED; return 0; } -static int dummy_hcd_resume (struct platform_device *dev) +static int dummy_hcd_resume (struct platform_device *pdev) { struct usb_hcd *hcd; - dev_dbg (&dev->dev, "%s\n", __FUNCTION__); - hcd = platform_get_drvdata (dev); + dev_dbg (&pdev->dev, "%s\n", __FUNCTION__); + hcd = platform_get_drvdata (pdev); hcd->state = HC_STATE_RUNNING; usb_hcd_poll_rh_status (hcd); -- cgit v1.2.3 From 1c50c317e2e7f15427149cbc216a63366468710e Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 14 Nov 2005 11:45:38 -0500 Subject: [PATCH] USB: central handling for host controllers that were reset during suspend/resume This patch (as515b) adds a routine to usbcore to simplify handling of host controllers that lost power or were reset during suspend/resume. The new core routine marks all the child devices of the root hub as NOTATTACHED and tells khubd to disconnect the device structures as soon as possible. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.h | 1 + drivers/usb/core/hub.c | 33 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci-pci.c | 9 +-------- drivers/usb/host/ohci-hcd.c | 7 +------ drivers/usb/host/sl811-hcd.c | 1 + drivers/usb/host/uhci-hcd.c | 6 +++++- 6 files changed, 42 insertions(+), 15 deletions(-) diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index c8a1b350e2cf..591b5aad1a18 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -380,6 +380,7 @@ extern int usb_find_interface_driver (struct usb_device *dev, #ifdef CONFIG_PM extern void usb_hcd_suspend_root_hub (struct usb_hcd *hcd); extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd); +extern void usb_root_hub_lost_power (struct usb_device *rhdev); extern int hcd_bus_suspend (struct usb_bus *bus); extern int hcd_bus_resume (struct usb_bus *bus); #else diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index f78bd124d290..5faf7edd73cb 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1039,6 +1039,39 @@ void usb_set_device_state(struct usb_device *udev, EXPORT_SYMBOL(usb_set_device_state); +#ifdef CONFIG_PM + +/** + * usb_root_hub_lost_power - called by HCD if the root hub lost Vbus power + * @rhdev: struct usb_device for the root hub + * + * The USB host controller driver calls this function when its root hub + * is resumed and Vbus power has been interrupted or the controller + * has been reset. The routine marks all the children of the root hub + * as NOTATTACHED and marks logical connect-change events on their ports. + */ +void usb_root_hub_lost_power(struct usb_device *rhdev) +{ + struct usb_hub *hub; + int port1; + unsigned long flags; + + dev_warn(&rhdev->dev, "root hub lost power or was reset\n"); + spin_lock_irqsave(&device_state_lock, flags); + hub = hdev_to_hub(rhdev); + for (port1 = 1; port1 <= rhdev->maxchild; ++port1) { + if (rhdev->children[port1 - 1]) { + recursively_mark_NOTATTACHED( + rhdev->children[port1 - 1]); + set_bit(port1, hub->change_bits); + } + } + spin_unlock_irqrestore(&device_state_lock, flags); +} +EXPORT_SYMBOL_GPL(usb_root_hub_lost_power); + +#endif + static void choose_address(struct usb_device *udev) { int devnum; diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index ac088bc72f1c..08ca0f849dab 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -278,7 +278,6 @@ static int ehci_pci_resume(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); unsigned port; - struct usb_device *root = hcd->self.root_hub; struct pci_dev *pdev = to_pci_dev(hcd->self.controller); int retval = -EINVAL; @@ -312,13 +311,7 @@ static int ehci_pci_resume(struct usb_hcd *hcd) restart: ehci_dbg(ehci, "lost power, restarting\n"); - for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) { - port--; - if (!root->children [port]) - continue; - usb_set_device_state(root->children[port], - USB_STATE_NOTATTACHED); - } + usb_root_hub_lost_power(hcd->self.root_hub); /* Else reset, to cope with power loss or flush-to-storage * style "resume" having let BIOS kick in during reboot. diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index e3af3ac4416a..a4b12404ae08 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -795,7 +795,6 @@ static int ohci_restart (struct ohci_hcd *ohci) int temp; int i; struct urb_priv *priv; - struct usb_device *root = ohci_to_hcd(ohci)->self.root_hub; /* mark any devices gone, so they do nothing till khubd disconnects. * recycle any "live" eds/tds (and urbs) right away. @@ -804,11 +803,7 @@ static int ohci_restart (struct ohci_hcd *ohci) */ spin_lock_irq(&ohci->lock); disable (ohci); - for (i = 0; i < root->maxchild; i++) { - if (root->children [i]) - usb_set_device_state (root->children[i], - USB_STATE_NOTATTACHED); - } + usb_root_hub_lost_power(ohci_to_hcd(ohci)->self.root_hub); if (!list_empty (&ohci->pending)) ohci_dbg(ohci, "abort schedule...\n"); list_for_each_entry (priv, &ohci->pending, pending) { diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 3a9cd4607962..517360b77d8e 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1803,6 +1803,7 @@ sl811h_resume(struct platform_device *dev) || !device_can_wakeup(&hcd->self.root_hub->dev)) { sl811->port1 = 0; port_power(sl811, 1); + usb_root_hub_lost_power(hcd->self.root_hub); return 0; } diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 1c0394cb3c89..071fab6b6475 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -748,8 +748,12 @@ static int uhci_resume(struct usb_hcd *hcd) check_and_reset_hc(uhci); configure_hc(uhci); - if (uhci->rh_state == UHCI_RH_RESET) + if (uhci->rh_state == UHCI_RH_RESET) { + + /* The controller had to be reset */ + usb_root_hub_lost_power(hcd->self.root_hub); suspend_rh(uhci, UHCI_RH_SUSPENDED); + } spin_unlock_irq(&uhci->lock); -- cgit v1.2.3 From a00828e9ac62caed7b830d631914d7748817ccd1 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Sat, 22 Oct 2005 20:15:09 -0700 Subject: [PATCH] USB: drivers/usb/storage/libusual This patch adds a shim driver libusual, which routes devices between usb-storage and ub according to the common table, based on unusual_devs.h. The help and example syntax is in Kconfig. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/block/Kconfig | 3 +- drivers/block/ub.c | 23 ++-- drivers/usb/Makefile | 1 + drivers/usb/storage/Kconfig | 14 ++ drivers/usb/storage/Makefile | 4 + drivers/usb/storage/libusual.c | 266 +++++++++++++++++++++++++++++++++++++ drivers/usb/storage/protocol.h | 14 -- drivers/usb/storage/transport.h | 31 ----- drivers/usb/storage/unusual_devs.h | 24 ++++ drivers/usb/storage/usb.c | 119 ++++++----------- drivers/usb/storage/usb.h | 31 +---- include/linux/usb_usual.h | 123 +++++++++++++++++ 12 files changed, 486 insertions(+), 167 deletions(-) create mode 100644 drivers/usb/storage/libusual.c create mode 100644 include/linux/usb_usual.h diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 7b1cd93892be..c4b9d2adfc08 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -358,7 +358,8 @@ config BLK_DEV_UB This driver supports certain USB attached storage devices such as flash keys. - Warning: Enabling this cripples the usb-storage driver. + If you enable this driver, it is recommended to avoid conflicts + with usb-storage by enabling USB_LIBUSUAL. If unsure, say N. diff --git a/drivers/block/ub.c b/drivers/block/ub.c index bfb23d543ff7..06d741d58a68 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -106,16 +107,6 @@ * +--------+ */ -/* - * Definitions which have to be scattered once we understand the layout better. - */ - -/* Transport (despite PR in the name) */ -#define US_PR_BULK 0x50 /* bulk only */ - -/* Protocol */ -#define US_SC_SCSI 0x06 /* Transparent */ - /* * This many LUNs per USB device. * Every one of them takes a host, see UB_MAX_HOSTS. @@ -422,13 +413,18 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum); /* */ +#ifdef CONFIG_USB_LIBUSUAL + +#define ub_usb_ids storage_usb_ids +#else + static struct usb_device_id ub_usb_ids[] = { - // { USB_DEVICE_VER(0x0781, 0x0002, 0x0009, 0x0009) }, /* SDDR-31 */ { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) }, { } }; MODULE_DEVICE_TABLE(usb, ub_usb_ids); +#endif /* CONFIG_USB_LIBUSUAL */ /* * Find me a way to identify "next free minor" for add_disk(), @@ -2172,6 +2168,9 @@ static int ub_probe(struct usb_interface *intf, int rc; int i; + if (usb_usual_check_type(dev_id, USB_US_TYPE_UB)) + return -ENXIO; + rc = -ENOMEM; if ((sc = kmalloc(sizeof(struct ub_dev), GFP_KERNEL)) == NULL) goto err_core; @@ -2479,6 +2478,7 @@ static int __init ub_init(void) if ((rc = usb_register(&ub_driver)) != 0) goto err_register; + usb_usual_set_present(USB_US_TYPE_UB); return 0; err_register: @@ -2494,6 +2494,7 @@ static void __exit ub_exit(void) devfs_remove(DEVFS_NAME); unregister_blkdev(UB_MAJOR, DRV_NAME); + usb_usual_clear_present(USB_US_TYPE_UB); } module_init(ub_init); diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index a50c2bc506f2..3639c3f8d357 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_USB_MIDI) += class/ obj-$(CONFIG_USB_PRINTER) += class/ obj-$(CONFIG_USB_STORAGE) += storage/ +obj-$(CONFIG_USB) += storage/ obj-$(CONFIG_USB_AIPTEK) += input/ obj-$(CONFIG_USB_ATI_REMOTE) += input/ diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index c41d64dbb0f0..bdfcb95d9c12 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -124,3 +124,17 @@ config USB_STORAGE_ONETOUCH hard drive's as an input device. An action can be associated with this input in any keybinding software. (e.g. gnome's keyboard short- cuts) + +config USB_LIBUSUAL + bool "The shared table of common (or usual) storage devices" + depends on USB + help + This module contains a table of common (or usual) devices + for usb-storage and ub drivers, and allows to switch binding + of these devices without rebuilding modules. + + Typical syntax of /etc/modprobe.conf is: + + options libusual bias="ub" + + If unsure, say N. diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 44ab8f9978fe..2d416e9028bb 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -22,3 +22,7 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ initializers.o $(usb-storage-obj-y) + +ifneq ($(CONFIG_USB_LIBUSUAL),) + obj-$(CONFIG_USB) += libusual.o +endif diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c new file mode 100644 index 000000000000..61f73d8a2c0f --- /dev/null +++ b/drivers/usb/storage/libusual.c @@ -0,0 +1,266 @@ +/* + * libusual + * + * The libusual contains the table of devices common for ub and usb-storage. + */ +#include +#include +#include +#include +#include + +/* + */ +#define USU_MOD_FL_THREAD 1 /* Thread is running */ +#define USU_MOD_FL_PRESENT 2 /* The module is loaded */ + +struct mod_status { + unsigned long fls; +}; + +static struct mod_status stat[3]; +static DEFINE_SPINLOCK(usu_lock); + +/* + */ +#define USB_US_DEFAULT_BIAS USB_US_TYPE_STOR + +#define BIAS_NAME_SIZE (sizeof("usb-storage")) +static char bias[BIAS_NAME_SIZE]; +static int usb_usual_bias; +static const char *bias_names[3] = { "none", "usb-storage", "ub" }; + +static DECLARE_MUTEX_LOCKED(usu_init_notify); +static DECLARE_COMPLETION(usu_end_notify); +static atomic_t total_threads = ATOMIC_INIT(0); + +static int usu_probe_thread(void *arg); +static int parse_bias(const char *bias_s); + +/* + * The table. + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName,useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +#define USUAL_DEV(useProto, useTrans, useType) \ +{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \ + .driver_info = ((useType)<<24) } + +struct usb_device_id storage_usb_ids [] = { +# include "unusual_devs.h" + { } /* Terminating entry */ +}; + +#undef USUAL_DEV +#undef UNUSUAL_DEV + +MODULE_DEVICE_TABLE(usb, storage_usb_ids); +EXPORT_SYMBOL_GPL(storage_usb_ids); + +/* + * @type: the module type as an integer + */ +void usb_usual_set_present(int type) +{ + struct mod_status *st; + unsigned long flags; + + if (type <= 0 || type >= 3) + return; + st = &stat[type]; + spin_lock_irqsave(&usu_lock, flags); + st->fls |= USU_MOD_FL_PRESENT; + spin_unlock_irqrestore(&usu_lock, flags); +} +EXPORT_SYMBOL_GPL(usb_usual_set_present); + +void usb_usual_clear_present(int type) +{ + struct mod_status *st; + unsigned long flags; + + if (type <= 0 || type >= 3) + return; + st = &stat[type]; + spin_lock_irqsave(&usu_lock, flags); + st->fls &= ~USU_MOD_FL_PRESENT; + spin_unlock_irqrestore(&usu_lock, flags); +} +EXPORT_SYMBOL_GPL(usb_usual_clear_present); + +/* + * Match the calling driver type against the table. + * Returns: 0 if the device matches. + */ +int usb_usual_check_type(const struct usb_device_id *id, int caller_type) +{ + int id_type = USB_US_TYPE(id->driver_info); + + if (caller_type <= 0 || caller_type >= 3) + return -EINVAL; + + /* Drivers grab fixed assignment devices */ + if (id_type == caller_type) + return 0; + /* Drivers grab devices biased to them */ + if (id_type == USB_US_TYPE_NONE && caller_type == usb_usual_bias) + return 0; + return -ENODEV; +} +EXPORT_SYMBOL_GPL(usb_usual_check_type); + +/* + */ +static int usu_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + int type; + int rc; + unsigned long flags; + + type = USB_US_TYPE(id->driver_info); + if (type == 0) + type = usb_usual_bias; + + spin_lock_irqsave(&usu_lock, flags); + if ((stat[type].fls & (USU_MOD_FL_THREAD|USU_MOD_FL_PRESENT)) != 0) { + spin_unlock_irqrestore(&usu_lock, flags); + return -ENXIO; + } + stat[type].fls |= USU_MOD_FL_THREAD; + spin_unlock_irqrestore(&usu_lock, flags); + + rc = kernel_thread(usu_probe_thread, (void*)type, CLONE_VM); + if (rc < 0) { + printk(KERN_WARNING "libusual: " + "Unable to start the thread for %s: %d\n", + bias_names[type], rc); + spin_lock_irqsave(&usu_lock, flags); + stat[type].fls &= ~USU_MOD_FL_THREAD; + spin_unlock_irqrestore(&usu_lock, flags); + return rc; /* Not being -ENXIO causes a message printed */ + } + atomic_inc(&total_threads); + + return -ENXIO; +} + +static void usu_disconnect(struct usb_interface *intf) +{ + ; /* We should not be here. */ +} + +static struct usb_driver usu_driver = { + .owner = THIS_MODULE, + .name = "libusual", + .probe = usu_probe, + .disconnect = usu_disconnect, + .id_table = storage_usb_ids, +}; + +/* + * A whole new thread for a purpose of request_module seems quite stupid. + * The request_module forks once inside again. However, if we attempt + * to load a storage module from our own modprobe thread, that module + * references our symbols, which cannot be resolved until our module is + * initialized. I wish there was a way to wait for the end of initialization. + * The module notifier reports MODULE_STATE_COMING only. + * So, we wait until module->init ends as the next best thing. + */ +static int usu_probe_thread(void *arg) +{ + int type = (unsigned long) arg; + struct mod_status *st = &stat[type]; + int rc; + unsigned long flags; + + daemonize("libusual_%d", type); /* "usb-storage" is kinda too long */ + + /* A completion does not work here because it's counted. */ + down(&usu_init_notify); + up(&usu_init_notify); + + rc = request_module(bias_names[type]); + spin_lock_irqsave(&usu_lock, flags); + if (rc == 0 && (st->fls & USU_MOD_FL_PRESENT) == 0) { + /* + * This should not happen, but let us keep tabs on it. + */ + printk(KERN_NOTICE "libusual: " + "modprobe for %s succeeded, but module is not present\n", + bias_names[type]); + } + st->fls &= ~USU_MOD_FL_THREAD; + spin_unlock_irqrestore(&usu_lock, flags); + + complete_and_exit(&usu_end_notify, 0); +} + +/* + */ +static int __init usb_usual_init(void) +{ + int rc; + + bias[BIAS_NAME_SIZE-1] = 0; + usb_usual_bias = parse_bias(bias); + + rc = usb_register(&usu_driver); + up(&usu_init_notify); + return rc; +} + +static void __exit usb_usual_exit(void) +{ + /* + * We do not check for any drivers present, because + * they keep us pinned with symbol references. + */ + + usb_deregister(&usu_driver); + + while (atomic_read(&total_threads) > 0) { + wait_for_completion(&usu_end_notify); + atomic_dec(&total_threads); + } +} + +/* + * Validate and accept the bias parameter. + * Maybe make an sysfs method later. XXX + */ +static int parse_bias(const char *bias_s) +{ + int i; + int bias_n = 0; + + if (bias_s[0] == 0 || bias_s[0] == ' ') { + bias_n = USB_US_DEFAULT_BIAS; + } else { + for (i = 1; i < 3; i++) { + if (strcmp(bias_s, bias_names[i]) == 0) { + bias_n = i; + break; + } + } + if (bias_n == 0) { + bias_n = USB_US_DEFAULT_BIAS; + printk(KERN_INFO + "libusual: unknown bias \"%s\", using \"%s\"\n", + bias_s, bias_names[bias_n]); + } + } + return bias_n; +} + +module_init(usb_usual_init); +module_exit(usb_usual_exit); + +module_param_string(bias, bias, BIAS_NAME_SIZE, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(bias, "Bias to usb-storage or ub"); + +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/storage/protocol.h b/drivers/usb/storage/protocol.h index 02bff01ab09c..845bed4b8031 100644 --- a/drivers/usb/storage/protocol.h +++ b/drivers/usb/storage/protocol.h @@ -41,20 +41,6 @@ #ifndef _PROTOCOL_H_ #define _PROTOCOL_H_ -/* Sub Classes */ - -#define US_SC_RBC 0x01 /* Typically, flash devices */ -#define US_SC_8020 0x02 /* CD-ROM */ -#define US_SC_QIC 0x03 /* QIC-157 Tapes */ -#define US_SC_UFI 0x04 /* Floppy */ -#define US_SC_8070 0x05 /* Removable media */ -#define US_SC_SCSI 0x06 /* Transparent */ -#define US_SC_ISD200 0x07 /* ISD200 ATA */ -#define US_SC_MIN US_SC_RBC -#define US_SC_MAX US_SC_ISD200 - -#define US_SC_DEVICE 0xff /* Use device's value */ - /* Protocol handling routines */ extern void usb_stor_ATAPI_command(struct scsi_cmnd*, struct us_data*); extern void usb_stor_qic157_command(struct scsi_cmnd*, struct us_data*); diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h index 0a362cc781ad..633a715850a4 100644 --- a/drivers/usb/storage/transport.h +++ b/drivers/usb/storage/transport.h @@ -41,39 +41,8 @@ #ifndef _TRANSPORT_H_ #define _TRANSPORT_H_ -#include #include -/* Protocols */ - -#define US_PR_CBI 0x00 /* Control/Bulk/Interrupt */ -#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */ -#define US_PR_BULK 0x50 /* bulk only */ -#ifdef CONFIG_USB_STORAGE_USBAT -#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */ -#endif -#ifdef CONFIG_USB_STORAGE_SDDR09 -#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */ -#endif -#ifdef CONFIG_USB_STORAGE_SDDR55 -#define US_PR_SDDR55 0x82 /* SDDR-55 (made up) */ -#endif -#define US_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */ - -#ifdef CONFIG_USB_STORAGE_FREECOM -#define US_PR_FREECOM 0xf1 /* Freecom */ -#endif - -#ifdef CONFIG_USB_STORAGE_DATAFAB -#define US_PR_DATAFAB 0xf2 /* Datafab chipsets */ -#endif - -#ifdef CONFIG_USB_STORAGE_JUMPSHOT -#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */ -#endif - -#define US_PR_DEVICE 0xff /* Use device's value */ - /* * Bulk only data structures */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index f5f47a34b168..76904ad11241 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1134,3 +1134,27 @@ UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999, US_SC_SCSI, US_PR_SDDR55, NULL, US_FL_SINGLE_LUN), #endif + +/* Control/Bulk transport for all SubClass values */ +USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_QIC, US_PR_CB, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_UFI, US_PR_CB, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_8070, US_PR_CB, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_SCSI, US_PR_CB, USB_US_TYPE_STOR), + +/* Control/Bulk/Interrupt transport for all SubClass values */ +USUAL_DEV(US_SC_RBC, US_PR_CBI, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_8020, US_PR_CBI, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_QIC, US_PR_CBI, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_UFI, US_PR_CBI, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_8070, US_PR_CBI, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_SCSI, US_PR_CBI, USB_US_TYPE_STOR), + +/* Bulk-only transport for all SubClass values */ +USUAL_DEV(US_SC_RBC, US_PR_BULK, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_8020, US_PR_BULK, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_QIC, US_PR_BULK, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_UFI, US_PR_BULK, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_8070, US_PR_BULK, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_SCSI, US_PR_BULK, 0), diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 3847ebed2aa4..c8375aa62723 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -112,49 +112,33 @@ static atomic_t total_threads = ATOMIC_INIT(0); static DECLARE_COMPLETION(threads_gone); -/* The entries in this table, except for final ones here - * (USB_MASS_STORAGE_CLASS and the empty entry), correspond, - * line for line with the entries of us_unsuaul_dev_list[]. +/* + * The entries in this table correspond, line for line, + * with the entries of us_unusual_dev_list[]. */ +#ifndef CONFIG_USB_LIBUSUAL #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ vendorName, productName,useProtocol, useTransport, \ initFunction, flags) \ -{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax) } +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +#define USUAL_DEV(useProto, useTrans, useType) \ +{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \ + .driver_info = (USB_US_TYPE_STOR<<24) } static struct usb_device_id storage_usb_ids [] = { # include "unusual_devs.h" #undef UNUSUAL_DEV - /* Control/Bulk transport for all SubClass values */ - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_CB) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_CB) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_CB) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_CB) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_CB) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_CB) }, - - /* Control/Bulk/Interrupt transport for all SubClass values */ - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_CBI) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_CBI) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_CBI) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_CBI) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_CBI) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_CBI) }, - - /* Bulk-only transport for all SubClass values */ - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_BULK) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_BULK) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_BULK) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_BULK) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_BULK) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) }, - +#undef USUAL_DEV /* Terminating entry */ { } }; MODULE_DEVICE_TABLE (usb, storage_usb_ids); +#endif /* CONFIG_USB_LIBUSUAL */ /* This is the list of devices we recognize, along with their flag data */ @@ -167,7 +151,6 @@ MODULE_DEVICE_TABLE (usb, storage_usb_ids); * are free to use as many characters as you like. */ -#undef UNUSUAL_DEV #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ vendor_name, product_name, use_protocol, use_transport, \ init_function, Flags) \ @@ -177,53 +160,18 @@ MODULE_DEVICE_TABLE (usb, storage_usb_ids); .useProtocol = use_protocol, \ .useTransport = use_transport, \ .initFunction = init_function, \ - .flags = Flags, \ +} + +#define USUAL_DEV(use_protocol, use_transport, use_type) \ +{ \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ } static struct us_unusual_dev us_unusual_dev_list[] = { # include "unusual_devs.h" # undef UNUSUAL_DEV - /* Control/Bulk transport for all SubClass values */ - { .useProtocol = US_SC_RBC, - .useTransport = US_PR_CB}, - { .useProtocol = US_SC_8020, - .useTransport = US_PR_CB}, - { .useProtocol = US_SC_QIC, - .useTransport = US_PR_CB}, - { .useProtocol = US_SC_UFI, - .useTransport = US_PR_CB}, - { .useProtocol = US_SC_8070, - .useTransport = US_PR_CB}, - { .useProtocol = US_SC_SCSI, - .useTransport = US_PR_CB}, - - /* Control/Bulk/Interrupt transport for all SubClass values */ - { .useProtocol = US_SC_RBC, - .useTransport = US_PR_CBI}, - { .useProtocol = US_SC_8020, - .useTransport = US_PR_CBI}, - { .useProtocol = US_SC_QIC, - .useTransport = US_PR_CBI}, - { .useProtocol = US_SC_UFI, - .useTransport = US_PR_CBI}, - { .useProtocol = US_SC_8070, - .useTransport = US_PR_CBI}, - { .useProtocol = US_SC_SCSI, - .useTransport = US_PR_CBI}, - - /* Bulk-only transport for all SubClass values */ - { .useProtocol = US_SC_RBC, - .useTransport = US_PR_BULK}, - { .useProtocol = US_SC_8020, - .useTransport = US_PR_BULK}, - { .useProtocol = US_SC_QIC, - .useTransport = US_PR_BULK}, - { .useProtocol = US_SC_UFI, - .useTransport = US_PR_BULK}, - { .useProtocol = US_SC_8070, - .useTransport = US_PR_BULK}, - { .useProtocol = US_SC_SCSI, - .useTransport = US_PR_BULK}, +# undef USUAL_DEV /* Terminating entry */ { NULL } @@ -484,14 +432,20 @@ static int associate_dev(struct us_data *us, struct usb_interface *intf) return 0; } +/* Find an unusual_dev descriptor (always succeeds in the current code) */ +static struct us_unusual_dev *find_unusual(const struct usb_device_id *id) +{ + const int id_index = id - storage_usb_ids; + return &us_unusual_dev_list[id_index]; +} + /* Get the unusual_devs entries and the string descriptors */ -static void get_device_info(struct us_data *us, int id_index) +static void get_device_info(struct us_data *us, const struct usb_device_id *id) { struct usb_device *dev = us->pusb_dev; struct usb_interface_descriptor *idesc = &us->pusb_intf->cur_altsetting->desc; - struct us_unusual_dev *unusual_dev = &us_unusual_dev_list[id_index]; - struct usb_device_id *id = &storage_usb_ids[id_index]; + struct us_unusual_dev *unusual_dev = find_unusual(id); /* Store the entries */ us->unusual_dev = unusual_dev; @@ -501,7 +455,7 @@ static void get_device_info(struct us_data *us, int id_index) us->protocol = (unusual_dev->useTransport == US_PR_DEVICE) ? idesc->bInterfaceProtocol : unusual_dev->useTransport; - us->flags = unusual_dev->flags; + us->flags = USB_US_ORIG_FLAGS(id->driver_info); /* * This flag is only needed when we're in high-speed, so let's @@ -529,7 +483,7 @@ static void get_device_info(struct us_data *us, int id_index) if (unusual_dev->useTransport != US_PR_DEVICE && us->protocol == idesc->bInterfaceProtocol) msg += 2; - if (msg >= 0 && !(unusual_dev->flags & US_FL_NEED_OVERRIDE)) + if (msg >= 0 && !(us->flags & US_FL_NEED_OVERRIDE)) printk(KERN_NOTICE USB_STORAGE "This device " "(%04x,%04x,%04x S %02x P %02x)" " has %s in unusual_devs.h\n" @@ -921,10 +875,12 @@ static int storage_probe(struct usb_interface *intf, { struct Scsi_Host *host; struct us_data *us; - const int id_index = id - storage_usb_ids; int result; struct task_struct *th; + if (usb_usual_check_type(id, USB_US_TYPE_STOR)) + return -ENXIO; + US_DEBUGP("USB Mass Storage device detected\n"); /* @@ -957,7 +913,7 @@ static int storage_probe(struct usb_interface *intf, * of the match from the usb_device_id table, so we can find the * corresponding entry in the private table. */ - get_device_info(us, id_index); + get_device_info(us, id); #ifdef CONFIG_USB_STORAGE_SDDR09 if (us->protocol == US_PR_EUSB_SDDR09 || @@ -1062,9 +1018,10 @@ static int __init usb_stor_init(void) /* register the driver, return usb_register return code if error */ retval = usb_register(&usb_storage_driver); - if (retval == 0) + if (retval == 0) { printk(KERN_INFO "USB Mass Storage support registered.\n"); - + usb_usual_set_present(USB_US_TYPE_STOR); + } return retval; } @@ -1088,6 +1045,8 @@ static void __exit usb_stor_exit(void) wait_for_completion(&threads_gone); atomic_dec(&total_threads); } + + usb_usual_clear_present(USB_US_TYPE_STOR); } module_init(usb_stor_init); diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 98b09711a739..0cd1eebc4497 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -45,6 +45,7 @@ #define _USB_H_ #include +#include #include #include #include @@ -63,38 +64,8 @@ struct us_unusual_dev { __u8 useProtocol; __u8 useTransport; int (*initFunction)(struct us_data *); - unsigned int flags; }; -/* - * Static flag definitions. We use this roundabout technique so that the - * proc_info() routine can automatically display a message for each flag. - */ -#define US_DO_ALL_FLAGS \ - US_FLAG(SINGLE_LUN, 0x00000001) \ - /* allow access to only LUN 0 */ \ - US_FLAG(NEED_OVERRIDE, 0x00000002) \ - /* unusual_devs entry is necessary */ \ - US_FLAG(SCM_MULT_TARG, 0x00000004) \ - /* supports multiple targets */ \ - US_FLAG(FIX_INQUIRY, 0x00000008) \ - /* INQUIRY response needs faking */ \ - US_FLAG(FIX_CAPACITY, 0x00000010) \ - /* READ CAPACITY response too big */ \ - US_FLAG(IGNORE_RESIDUE, 0x00000020) \ - /* reported residue is wrong */ \ - US_FLAG(BULK32, 0x00000040) \ - /* Uses 32-byte CBW length */ \ - US_FLAG(NOT_LOCKABLE, 0x00000080) \ - /* PREVENT/ALLOW not supported */ \ - US_FLAG(GO_SLOW, 0x00000100) \ - /* Need delay after Command phase */ \ - US_FLAG(NO_WP_DETECT, 0x00000200) \ - /* Don't check for write-protect */ \ - -#define US_FLAG(name, value) US_FL_##name = value , -enum { US_DO_ALL_FLAGS }; -#undef US_FLAG /* Dynamic flag definitions: used in set_bit() etc. */ #define US_FLIDX_URB_ACTIVE 18 /* 0x00040000 current_urb is in use */ diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h new file mode 100644 index 000000000000..f9c058f33712 --- /dev/null +++ b/include/linux/usb_usual.h @@ -0,0 +1,123 @@ +/* + * Interface to the libusual. + * + * Copyright (c) 2005 Pete Zaitcev + * Copyright (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * Copyright (c) 1999 Michael Gee (michael@linuxspecific.com) + */ + +#ifndef __LINUX_USB_USUAL_H +#define __LINUX_USB_USUAL_H + +#include + +/* We should do this for cleanliness... But other usb_foo.h do not do this. */ +/* #include */ + +/* + * The flags field, which we store in usb_device_id.driver_info. + * It is compatible with the old usb-storage flags in lower 24 bits. + */ + +/* + * Static flag definitions. We use this roundabout technique so that the + * proc_info() routine can automatically display a message for each flag. + */ +#define US_DO_ALL_FLAGS \ + US_FLAG(SINGLE_LUN, 0x00000001) \ + /* allow access to only LUN 0 */ \ + US_FLAG(NEED_OVERRIDE, 0x00000002) \ + /* unusual_devs entry is necessary */ \ + US_FLAG(SCM_MULT_TARG, 0x00000004) \ + /* supports multiple targets */ \ + US_FLAG(FIX_INQUIRY, 0x00000008) \ + /* INQUIRY response needs faking */ \ + US_FLAG(FIX_CAPACITY, 0x00000010) \ + /* READ CAPACITY response too big */ \ + US_FLAG(IGNORE_RESIDUE, 0x00000020) \ + /* reported residue is wrong */ \ + US_FLAG(BULK32, 0x00000040) \ + /* Uses 32-byte CBW length */ \ + US_FLAG(NOT_LOCKABLE, 0x00000080) \ + /* PREVENT/ALLOW not supported */ \ + US_FLAG(GO_SLOW, 0x00000100) \ + /* Need delay after Command phase */ \ + US_FLAG(NO_WP_DETECT, 0x00000200) \ + /* Don't check for write-protect */ \ + +#define US_FLAG(name, value) US_FL_##name = value , +enum { US_DO_ALL_FLAGS }; +#undef US_FLAG + +/* + * The bias field for libusual and friends. + */ +#define USB_US_TYPE_NONE 0 +#define USB_US_TYPE_STOR 1 /* usb-storage */ +#define USB_US_TYPE_UB 2 /* ub */ + +#define USB_US_TYPE(flags) (((flags) >> 24) & 0xFF) +#define USB_US_ORIG_FLAGS(flags) ((flags) & 0x00FFFFFF) + +/* + * This is probably not the best place to keep these constants, conceptually. + * But it's the only header included into all places which need them. + */ + +/* Sub Classes */ + +#define US_SC_RBC 0x01 /* Typically, flash devices */ +#define US_SC_8020 0x02 /* CD-ROM */ +#define US_SC_QIC 0x03 /* QIC-157 Tapes */ +#define US_SC_UFI 0x04 /* Floppy */ +#define US_SC_8070 0x05 /* Removable media */ +#define US_SC_SCSI 0x06 /* Transparent */ +#define US_SC_ISD200 0x07 /* ISD200 ATA */ +#define US_SC_MIN US_SC_RBC +#define US_SC_MAX US_SC_ISD200 + +#define US_SC_DEVICE 0xff /* Use device's value */ + +/* Protocols */ + +#define US_PR_CBI 0x00 /* Control/Bulk/Interrupt */ +#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */ +#define US_PR_BULK 0x50 /* bulk only */ +#ifdef CONFIG_USB_STORAGE_USBAT +#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */ +#endif +#ifdef CONFIG_USB_STORAGE_SDDR09 +#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */ +#endif +#ifdef CONFIG_USB_STORAGE_SDDR55 +#define US_PR_SDDR55 0x82 /* SDDR-55 (made up) */ +#endif +#define US_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */ +#ifdef CONFIG_USB_STORAGE_FREECOM +#define US_PR_FREECOM 0xf1 /* Freecom */ +#endif +#ifdef CONFIG_USB_STORAGE_DATAFAB +#define US_PR_DATAFAB 0xf2 /* Datafab chipsets */ +#endif +#ifdef CONFIG_USB_STORAGE_JUMPSHOT +#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */ +#endif + +#define US_PR_DEVICE 0xff /* Use device's value */ + +/* + */ +#ifdef CONFIG_USB_LIBUSUAL + +extern struct usb_device_id storage_usb_ids[]; +extern void usb_usual_set_present(int type); +extern void usb_usual_clear_present(int type); +extern int usb_usual_check_type(const struct usb_device_id *, int type); +#else + +#define usb_usual_set_present(t) do { } while(0) +#define usb_usual_clear_present(t) do { } while(0) +#define usb_usual_check_type(id, t) (0) +#endif /* CONFIG_USB_LIBUSUAL */ + +#endif /* __LINUX_USB_USUAL_H */ -- cgit v1.2.3 From 5ba35bd8f9a4fa6b92ef707826c47a1466ece460 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Fri, 16 Dec 2005 00:39:36 -0800 Subject: [PATCH] USB: make bias writeable in libusual Make the bias parameter writeable. Writing the parameter does not trigger a rebind of currently attached storage devices. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/libusual.c | 53 +++++++++++++++++++++--------------------- 1 file changed, 27 insertions(+), 26 deletions(-) diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c index 61f73d8a2c0f..2680c69a2417 100644 --- a/drivers/usb/storage/libusual.c +++ b/drivers/usb/storage/libusual.c @@ -24,10 +24,9 @@ static DEFINE_SPINLOCK(usu_lock); /* */ #define USB_US_DEFAULT_BIAS USB_US_TYPE_STOR +static atomic_t usu_bias = ATOMIC_INIT(USB_US_DEFAULT_BIAS); #define BIAS_NAME_SIZE (sizeof("usb-storage")) -static char bias[BIAS_NAME_SIZE]; -static int usb_usual_bias; static const char *bias_names[3] = { "none", "usb-storage", "ub" }; static DECLARE_MUTEX_LOCKED(usu_init_notify); @@ -35,7 +34,6 @@ static DECLARE_COMPLETION(usu_end_notify); static atomic_t total_threads = ATOMIC_INIT(0); static int usu_probe_thread(void *arg); -static int parse_bias(const char *bias_s); /* * The table. @@ -107,7 +105,7 @@ int usb_usual_check_type(const struct usb_device_id *id, int caller_type) if (id_type == caller_type) return 0; /* Drivers grab devices biased to them */ - if (id_type == USB_US_TYPE_NONE && caller_type == usb_usual_bias) + if (id_type == USB_US_TYPE_NONE && caller_type == atomic_read(&usu_bias)) return 0; return -ENODEV; } @@ -124,7 +122,7 @@ static int usu_probe(struct usb_interface *intf, type = USB_US_TYPE(id->driver_info); if (type == 0) - type = usb_usual_bias; + type = atomic_read(&usu_bias); spin_lock_irqsave(&usu_lock, flags); if ((stat[type].fls & (USU_MOD_FL_THREAD|USU_MOD_FL_PRESENT)) != 0) { @@ -206,9 +204,6 @@ static int __init usb_usual_init(void) { int rc; - bias[BIAS_NAME_SIZE-1] = 0; - usb_usual_bias = parse_bias(bias); - rc = usb_register(&usu_driver); up(&usu_init_notify); return rc; @@ -231,36 +226,42 @@ static void __exit usb_usual_exit(void) /* * Validate and accept the bias parameter. - * Maybe make an sysfs method later. XXX */ -static int parse_bias(const char *bias_s) +static int usu_set_bias(const char *bias_s, struct kernel_param *kp) { int i; + int len; int bias_n = 0; - if (bias_s[0] == 0 || bias_s[0] == ' ') { - bias_n = USB_US_DEFAULT_BIAS; - } else { - for (i = 1; i < 3; i++) { - if (strcmp(bias_s, bias_names[i]) == 0) { - bias_n = i; - break; - } - } - if (bias_n == 0) { - bias_n = USB_US_DEFAULT_BIAS; - printk(KERN_INFO - "libusual: unknown bias \"%s\", using \"%s\"\n", - bias_s, bias_names[bias_n]); + len = strlen(bias_s); + if (len == 0) + return -EDOM; + if (bias_s[len-1] == '\n') + --len; + + for (i = 1; i < 3; i++) { + if (strncmp(bias_s, bias_names[i], len) == 0) { + bias_n = i; + break; } } - return bias_n; + if (bias_n == 0) + return -EINVAL; + + atomic_set(&usu_bias, bias_n); + return 0; +} + +static int usu_get_bias(char *buffer, struct kernel_param *kp) +{ + return strlen(strcpy(buffer, bias_names[atomic_read(&usu_bias)])); } module_init(usb_usual_init); module_exit(usb_usual_exit); -module_param_string(bias, bias, BIAS_NAME_SIZE, S_IRUGO|S_IWUSR); +module_param_call(bias, usu_set_bias, usu_get_bias, NULL, S_IRUGO|S_IWUSR); +__MODULE_PARM_TYPE(bias, "string"); MODULE_PARM_DESC(bias, "Bias to usb-storage or ub"); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From ddae41be6145f5f9cb4e6df35661a09121b90672 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 16 Nov 2005 13:41:28 -0800 Subject: [PATCH] USB: reorg some functions out of the main usb.c file This will make the dynamic-id stuff easier to do, as it will be self-contained. No logic was changed at all. Signed-off-by: Greg Kroah-Hartman --- Documentation/DocBook/usb.tmpl | 1 + drivers/usb/core/Makefile | 2 +- drivers/usb/core/driver.c | 338 +++++++++++++++++++++++++++++++++++++++++ drivers/usb/core/usb.c | 311 ------------------------------------- drivers/usb/core/usb.h | 3 + 5 files changed, 343 insertions(+), 312 deletions(-) create mode 100644 drivers/usb/core/driver.c diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl index 15ce0f21e5e0..320af25de3a2 100644 --- a/Documentation/DocBook/usb.tmpl +++ b/Documentation/DocBook/usb.tmpl @@ -253,6 +253,7 @@ !Edrivers/usb/core/urb.c !Edrivers/usb/core/message.c !Edrivers/usb/core/file.c +!Edrivers/usb/core/driver.c !Edrivers/usb/core/usb.c !Edrivers/usb/core/hub.c diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile index 86d5c380892d..28329ddf187c 100644 --- a/drivers/usb/core/Makefile +++ b/drivers/usb/core/Makefile @@ -2,7 +2,7 @@ # Makefile for USB Core files and filesystem # -usbcore-objs := usb.o hub.o hcd.o urb.o message.o \ +usbcore-objs := usb.o hub.o hcd.o urb.o message.o driver.o \ config.o file.o buffer.o sysfs.o devio.o notify.o ifeq ($(CONFIG_PCI),y) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c new file mode 100644 index 000000000000..921a21be651d --- /dev/null +++ b/drivers/usb/core/driver.c @@ -0,0 +1,338 @@ +/* + * drivers/usb/driver.c - most of the driver model stuff for usb + * + * (C) Copyright 2005 Greg Kroah-Hartman + * + * based on drivers/usb/usb.c which had the following copyrights: + * (C) Copyright Linus Torvalds 1999 + * (C) Copyright Johannes Erdfelt 1999-2001 + * (C) Copyright Andreas Gal 1999 + * (C) Copyright Gregory P. Smith 1999 + * (C) Copyright Deti Fliegl 1999 (new USB architecture) + * (C) Copyright Randy Dunlap 2000 + * (C) Copyright David Brownell 2000-2004 + * (C) Copyright Yggdrasil Computing, Inc. 2000 + * (usb_device_id matching changes by Adam J. Richter) + * (C) Copyright Greg Kroah-Hartman 2002-2003 + * + * NOTE! This is not actually a driver at all, rather this is + * just a collection of helper routines that implement the + * generic USB things that the real drivers can use.. + * + */ + +#include +#include +#include +#include "hcd.h" +#include "usb.h" + +static int generic_probe(struct device *dev) +{ + return 0; +} +static int generic_remove(struct device *dev) +{ + struct usb_device *udev = to_usb_device(dev); + + /* if this is only an unbind, not a physical disconnect, then + * unconfigure the device */ + if (udev->state == USB_STATE_CONFIGURED) + usb_set_configuration(udev, 0); + + /* in case the call failed or the device was suspended */ + if (udev->state >= USB_STATE_CONFIGURED) + usb_disable_device(udev, 0); + return 0; +} + +struct device_driver usb_generic_driver = { + .owner = THIS_MODULE, + .name = "usb", + .bus = &usb_bus_type, + .probe = generic_probe, + .remove = generic_remove, +}; + +/* Fun hack to determine if the struct device is a + * usb device or a usb interface. */ +int usb_generic_driver_data; + +/* called from driver core with usb_bus_type.subsys writelock */ +static int usb_probe_interface(struct device *dev) +{ + struct usb_interface * intf = to_usb_interface(dev); + struct usb_driver * driver = to_usb_driver(dev->driver); + const struct usb_device_id *id; + int error = -ENODEV; + + dev_dbg(dev, "%s\n", __FUNCTION__); + + if (!driver->probe) + return error; + /* FIXME we'd much prefer to just resume it ... */ + if (interface_to_usbdev(intf)->state == USB_STATE_SUSPENDED) + return -EHOSTUNREACH; + + id = usb_match_id(intf, driver->id_table); + if (id) { + dev_dbg(dev, "%s - got id\n", __FUNCTION__); + + /* Interface "power state" doesn't correspond to any hardware + * state whatsoever. We use it to record when it's bound to + * a driver that may start I/0: it's not frozen/quiesced. + */ + mark_active(intf); + intf->condition = USB_INTERFACE_BINDING; + error = driver->probe(intf, id); + if (error) { + mark_quiesced(intf); + intf->condition = USB_INTERFACE_UNBOUND; + } else + intf->condition = USB_INTERFACE_BOUND; + } + + return error; +} + +/* called from driver core with usb_bus_type.subsys writelock */ +static int usb_unbind_interface(struct device *dev) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usb_driver *driver = to_usb_driver(intf->dev.driver); + + intf->condition = USB_INTERFACE_UNBINDING; + + /* release all urbs for this interface */ + usb_disable_interface(interface_to_usbdev(intf), intf); + + if (driver && driver->disconnect) + driver->disconnect(intf); + + /* reset other interface state */ + usb_set_interface(interface_to_usbdev(intf), + intf->altsetting[0].desc.bInterfaceNumber, + 0); + usb_set_intfdata(intf, NULL); + intf->condition = USB_INTERFACE_UNBOUND; + mark_quiesced(intf); + + return 0; +} + +/** + * usb_match_id - find first usb_device_id matching device or interface + * @interface: the interface of interest + * @id: array of usb_device_id structures, terminated by zero entry + * + * usb_match_id searches an array of usb_device_id's and returns + * the first one matching the device or interface, or null. + * This is used when binding (or rebinding) a driver to an interface. + * Most USB device drivers will use this indirectly, through the usb core, + * but some layered driver frameworks use it directly. + * These device tables are exported with MODULE_DEVICE_TABLE, through + * modutils, to support the driver loading functionality of USB hotplugging. + * + * What Matches: + * + * The "match_flags" element in a usb_device_id controls which + * members are used. If the corresponding bit is set, the + * value in the device_id must match its corresponding member + * in the device or interface descriptor, or else the device_id + * does not match. + * + * "driver_info" is normally used only by device drivers, + * but you can create a wildcard "matches anything" usb_device_id + * as a driver's "modules.usbmap" entry if you provide an id with + * only a nonzero "driver_info" field. If you do this, the USB device + * driver's probe() routine should use additional intelligence to + * decide whether to bind to the specified interface. + * + * What Makes Good usb_device_id Tables: + * + * The match algorithm is very simple, so that intelligence in + * driver selection must come from smart driver id records. + * Unless you have good reasons to use another selection policy, + * provide match elements only in related groups, and order match + * specifiers from specific to general. Use the macros provided + * for that purpose if you can. + * + * The most specific match specifiers use device descriptor + * data. These are commonly used with product-specific matches; + * the USB_DEVICE macro lets you provide vendor and product IDs, + * and you can also match against ranges of product revisions. + * These are widely used for devices with application or vendor + * specific bDeviceClass values. + * + * Matches based on device class/subclass/protocol specifications + * are slightly more general; use the USB_DEVICE_INFO macro, or + * its siblings. These are used with single-function devices + * where bDeviceClass doesn't specify that each interface has + * its own class. + * + * Matches based on interface class/subclass/protocol are the + * most general; they let drivers bind to any interface on a + * multiple-function device. Use the USB_INTERFACE_INFO + * macro, or its siblings, to match class-per-interface style + * devices (as recorded in bDeviceClass). + * + * Within those groups, remember that not all combinations are + * meaningful. For example, don't give a product version range + * without vendor and product IDs; or specify a protocol without + * its associated class and subclass. + */ +const struct usb_device_id *usb_match_id(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_host_interface *intf; + struct usb_device *dev; + + /* proc_connectinfo in devio.c may call us with id == NULL. */ + if (id == NULL) + return NULL; + + intf = interface->cur_altsetting; + dev = interface_to_usbdev(interface); + + /* It is important to check that id->driver_info is nonzero, + since an entry that is all zeroes except for a nonzero + id->driver_info is the way to create an entry that + indicates that the driver want to examine every + device and interface. */ + for (; id->idVendor || id->bDeviceClass || id->bInterfaceClass || + id->driver_info; id++) { + + if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && + id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && + id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) + continue; + + /* No need to test id->bcdDevice_lo != 0, since 0 is never + greater than any unsigned number. */ + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && + (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && + (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && + (id->bDeviceClass != dev->descriptor.bDeviceClass)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && + (id->bDeviceSubClass!= dev->descriptor.bDeviceSubClass)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && + (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) && + (id->bInterfaceClass != intf->desc.bInterfaceClass)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) && + (id->bInterfaceSubClass != intf->desc.bInterfaceSubClass)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) && + (id->bInterfaceProtocol != intf->desc.bInterfaceProtocol)) + continue; + + return id; + } + + return NULL; +} +EXPORT_SYMBOL_GPL(usb_match_id); + +int usb_device_match(struct device *dev, struct device_driver *drv) +{ + struct usb_interface *intf; + struct usb_driver *usb_drv; + const struct usb_device_id *id; + + /* check for generic driver, which we don't match any device with */ + if (drv == &usb_generic_driver) + return 0; + + intf = to_usb_interface(dev); + usb_drv = to_usb_driver(drv); + + id = usb_match_id(intf, usb_drv->id_table); + if (id) + return 1; + + return 0; +} + +/** + * usb_register - register a USB driver + * @new_driver: USB operations for the driver + * + * Registers a USB driver with the USB core. The list of unattached + * interfaces will be rescanned whenever a new driver is added, allowing + * the new driver to attach to any recognized devices. + * Returns a negative error code on failure and 0 on success. + * + * NOTE: if you want your driver to use the USB major number, you must call + * usb_register_dev() to enable that functionality. This function no longer + * takes care of that. + */ +int usb_register(struct usb_driver *new_driver) +{ + int retval = 0; + + if (usb_disabled()) + return -ENODEV; + + new_driver->driver.name = (char *)new_driver->name; + new_driver->driver.bus = &usb_bus_type; + new_driver->driver.probe = usb_probe_interface; + new_driver->driver.remove = usb_unbind_interface; + new_driver->driver.owner = new_driver->owner; + + usb_lock_all_devices(); + retval = driver_register(&new_driver->driver); + usb_unlock_all_devices(); + + if (!retval) { + pr_info("%s: registered new driver %s\n", + usbcore_name, new_driver->name); + usbfs_update_special(); + } else { + printk(KERN_ERR "%s: error %d registering driver %s\n", + usbcore_name, retval, new_driver->name); + } + + return retval; +} +EXPORT_SYMBOL_GPL(usb_register); + +/** + * usb_deregister - unregister a USB driver + * @driver: USB operations of the driver to unregister + * Context: must be able to sleep + * + * Unlinks the specified driver from the internal USB driver list. + * + * NOTE: If you called usb_register_dev(), you still need to call + * usb_deregister_dev() to clean up your driver's allocated minor numbers, + * this * call will no longer do it for you. + */ +void usb_deregister(struct usb_driver *driver) +{ + pr_info("%s: deregistering driver %s\n", usbcore_name, driver->name); + + usb_lock_all_devices(); + driver_unregister(&driver->driver); + usb_unlock_all_devices(); + + usbfs_update_special(); +} +EXPORT_SYMBOL_GPL(usb_deregister); diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index e80ef9467825..294e9f127477 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -52,161 +52,6 @@ static int nousb; /* Disable USB when built into kernel image */ static DECLARE_RWSEM(usb_all_devices_rwsem); -static int generic_probe (struct device *dev) -{ - return 0; -} -static int generic_remove (struct device *dev) -{ - struct usb_device *udev = to_usb_device(dev); - - /* if this is only an unbind, not a physical disconnect, then - * unconfigure the device */ - if (udev->state == USB_STATE_CONFIGURED) - usb_set_configuration(udev, 0); - - /* in case the call failed or the device was suspended */ - if (udev->state >= USB_STATE_CONFIGURED) - usb_disable_device(udev, 0); - return 0; -} - -static struct device_driver usb_generic_driver = { - .owner = THIS_MODULE, - .name = "usb", - .bus = &usb_bus_type, - .probe = generic_probe, - .remove = generic_remove, -}; - -static int usb_generic_driver_data; - -/* called from driver core with usb_bus_type.subsys writelock */ -static int usb_probe_interface(struct device *dev) -{ - struct usb_interface * intf = to_usb_interface(dev); - struct usb_driver * driver = to_usb_driver(dev->driver); - const struct usb_device_id *id; - int error = -ENODEV; - - dev_dbg(dev, "%s\n", __FUNCTION__); - - if (!driver->probe) - return error; - /* FIXME we'd much prefer to just resume it ... */ - if (interface_to_usbdev(intf)->state == USB_STATE_SUSPENDED) - return -EHOSTUNREACH; - - id = usb_match_id (intf, driver->id_table); - if (id) { - dev_dbg (dev, "%s - got id\n", __FUNCTION__); - - /* Interface "power state" doesn't correspond to any hardware - * state whatsoever. We use it to record when it's bound to - * a driver that may start I/0: it's not frozen/quiesced. - */ - mark_active(intf); - intf->condition = USB_INTERFACE_BINDING; - error = driver->probe (intf, id); - if (error) { - mark_quiesced(intf); - intf->condition = USB_INTERFACE_UNBOUND; - } else - intf->condition = USB_INTERFACE_BOUND; - } - - return error; -} - -/* called from driver core with usb_bus_type.subsys writelock */ -static int usb_unbind_interface(struct device *dev) -{ - struct usb_interface *intf = to_usb_interface(dev); - struct usb_driver *driver = to_usb_driver(intf->dev.driver); - - intf->condition = USB_INTERFACE_UNBINDING; - - /* release all urbs for this interface */ - usb_disable_interface(interface_to_usbdev(intf), intf); - - if (driver && driver->disconnect) - driver->disconnect(intf); - - /* reset other interface state */ - usb_set_interface(interface_to_usbdev(intf), - intf->altsetting[0].desc.bInterfaceNumber, - 0); - usb_set_intfdata(intf, NULL); - intf->condition = USB_INTERFACE_UNBOUND; - mark_quiesced(intf); - - return 0; -} - -/** - * usb_register - register a USB driver - * @new_driver: USB operations for the driver - * - * Registers a USB driver with the USB core. The list of unattached - * interfaces will be rescanned whenever a new driver is added, allowing - * the new driver to attach to any recognized devices. - * Returns a negative error code on failure and 0 on success. - * - * NOTE: if you want your driver to use the USB major number, you must call - * usb_register_dev() to enable that functionality. This function no longer - * takes care of that. - */ -int usb_register(struct usb_driver *new_driver) -{ - int retval = 0; - - if (nousb) - return -ENODEV; - - new_driver->driver.name = (char *)new_driver->name; - new_driver->driver.bus = &usb_bus_type; - new_driver->driver.probe = usb_probe_interface; - new_driver->driver.remove = usb_unbind_interface; - new_driver->driver.owner = new_driver->owner; - - usb_lock_all_devices(); - retval = driver_register(&new_driver->driver); - usb_unlock_all_devices(); - - if (!retval) { - pr_info("%s: registered new driver %s\n", - usbcore_name, new_driver->name); - usbfs_update_special(); - } else { - printk(KERN_ERR "%s: error %d registering driver %s\n", - usbcore_name, retval, new_driver->name); - } - - return retval; -} - -/** - * usb_deregister - unregister a USB driver - * @driver: USB operations of the driver to unregister - * Context: must be able to sleep - * - * Unlinks the specified driver from the internal USB driver list. - * - * NOTE: If you called usb_register_dev(), you still need to call - * usb_deregister_dev() to clean up your driver's allocated minor numbers, - * this * call will no longer do it for you. - */ -void usb_deregister(struct usb_driver *driver) -{ - pr_info("%s: deregistering driver %s\n", usbcore_name, driver->name); - - usb_lock_all_devices(); - driver_unregister (&driver->driver); - usb_unlock_all_devices(); - - usbfs_update_special(); -} - /** * usb_ifnum_to_if - get the interface object with a given interface number * @dev: the device whose current configuration is considered @@ -352,138 +197,6 @@ void usb_driver_release_interface(struct usb_driver *driver, mark_quiesced(iface); } -/** - * usb_match_id - find first usb_device_id matching device or interface - * @interface: the interface of interest - * @id: array of usb_device_id structures, terminated by zero entry - * - * usb_match_id searches an array of usb_device_id's and returns - * the first one matching the device or interface, or null. - * This is used when binding (or rebinding) a driver to an interface. - * Most USB device drivers will use this indirectly, through the usb core, - * but some layered driver frameworks use it directly. - * These device tables are exported with MODULE_DEVICE_TABLE, through - * modutils and "modules.usbmap", to support the driver loading - * functionality of USB hotplugging. - * - * What Matches: - * - * The "match_flags" element in a usb_device_id controls which - * members are used. If the corresponding bit is set, the - * value in the device_id must match its corresponding member - * in the device or interface descriptor, or else the device_id - * does not match. - * - * "driver_info" is normally used only by device drivers, - * but you can create a wildcard "matches anything" usb_device_id - * as a driver's "modules.usbmap" entry if you provide an id with - * only a nonzero "driver_info" field. If you do this, the USB device - * driver's probe() routine should use additional intelligence to - * decide whether to bind to the specified interface. - * - * What Makes Good usb_device_id Tables: - * - * The match algorithm is very simple, so that intelligence in - * driver selection must come from smart driver id records. - * Unless you have good reasons to use another selection policy, - * provide match elements only in related groups, and order match - * specifiers from specific to general. Use the macros provided - * for that purpose if you can. - * - * The most specific match specifiers use device descriptor - * data. These are commonly used with product-specific matches; - * the USB_DEVICE macro lets you provide vendor and product IDs, - * and you can also match against ranges of product revisions. - * These are widely used for devices with application or vendor - * specific bDeviceClass values. - * - * Matches based on device class/subclass/protocol specifications - * are slightly more general; use the USB_DEVICE_INFO macro, or - * its siblings. These are used with single-function devices - * where bDeviceClass doesn't specify that each interface has - * its own class. - * - * Matches based on interface class/subclass/protocol are the - * most general; they let drivers bind to any interface on a - * multiple-function device. Use the USB_INTERFACE_INFO - * macro, or its siblings, to match class-per-interface style - * devices (as recorded in bDeviceClass). - * - * Within those groups, remember that not all combinations are - * meaningful. For example, don't give a product version range - * without vendor and product IDs; or specify a protocol without - * its associated class and subclass. - */ -const struct usb_device_id * -usb_match_id(struct usb_interface *interface, const struct usb_device_id *id) -{ - struct usb_host_interface *intf; - struct usb_device *dev; - - /* proc_connectinfo in devio.c may call us with id == NULL. */ - if (id == NULL) - return NULL; - - intf = interface->cur_altsetting; - dev = interface_to_usbdev(interface); - - /* It is important to check that id->driver_info is nonzero, - since an entry that is all zeroes except for a nonzero - id->driver_info is the way to create an entry that - indicates that the driver want to examine every - device and interface. */ - for (; id->idVendor || id->bDeviceClass || id->bInterfaceClass || - id->driver_info; id++) { - - if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && - id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && - id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) - continue; - - /* No need to test id->bcdDevice_lo != 0, since 0 is never - greater than any unsigned number. */ - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && - (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && - (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && - (id->bDeviceClass != dev->descriptor.bDeviceClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && - (id->bDeviceSubClass!= dev->descriptor.bDeviceSubClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && - (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) && - (id->bInterfaceClass != intf->desc.bInterfaceClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) && - (id->bInterfaceSubClass != intf->desc.bInterfaceSubClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) && - (id->bInterfaceProtocol != intf->desc.bInterfaceProtocol)) - continue; - - return id; - } - - return NULL; -} - - static int __find_interface(struct device * dev, void * data) { struct usb_interface ** ret = (struct usb_interface **)data; @@ -521,27 +234,6 @@ struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor) return ret ? intf : NULL; } -static int usb_device_match (struct device *dev, struct device_driver *drv) -{ - struct usb_interface *intf; - struct usb_driver *usb_drv; - const struct usb_device_id *id; - - /* check for generic driver, which we don't match any device with */ - if (drv == &usb_generic_driver) - return 0; - - intf = to_usb_interface(dev); - usb_drv = to_usb_driver(drv); - - id = usb_match_id (intf, usb_drv->id_table); - if (id) - return 1; - - return 0; -} - - #ifdef CONFIG_HOTPLUG /* @@ -1598,8 +1290,6 @@ module_exit(usb_exit); * driver modules to use. */ -EXPORT_SYMBOL(usb_register); -EXPORT_SYMBOL(usb_deregister); EXPORT_SYMBOL(usb_disabled); EXPORT_SYMBOL_GPL(usb_get_intf); @@ -1617,7 +1307,6 @@ EXPORT_SYMBOL(usb_unlock_device); EXPORT_SYMBOL(usb_driver_claim_interface); EXPORT_SYMBOL(usb_driver_release_interface); -EXPORT_SYMBOL(usb_match_id); EXPORT_SYMBOL(usb_find_interface); EXPORT_SYMBOL(usb_ifnum_to_if); EXPORT_SYMBOL(usb_altnum_to_altsetting); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 1c4a68499dce..98e85fb4d3b7 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -33,6 +33,9 @@ extern void usb_host_cleanup(void); extern int usb_suspend_device(struct usb_device *dev); extern int usb_resume_device(struct usb_device *dev); +extern struct device_driver usb_generic_driver; +extern int usb_generic_driver_data; +extern int usb_device_match(struct device *dev, struct device_driver *drv); /* Interfaces and their "power state" are owned by usbcore */ -- cgit v1.2.3 From 733260ff9c45bd4db60f45d17e8560a4a68dff4d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 16 Nov 2005 13:41:28 -0800 Subject: [PATCH] USB: add dynamic id functionality to USB core Echo the usb vendor and product id to the "new_id" file in the driver's sysfs directory, and then that driver will be able to bind to a device with those ids if it is present. Example: echo 0557 2008 > /sys/bus/usb/drivers/foo_driver/new_id adds the hex values 0557 and 2008 to the device id table for the foo_driver. Note, usb-serial drivers do not currently work with this capability yet. usb-storage also might have some oddities. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 218 +++++++++++++++++++++++++++++++++++----------- include/linux/usb.h | 8 ++ 2 files changed, 176 insertions(+), 50 deletions(-) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 921a21be651d..1c0611045379 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -27,6 +27,15 @@ #include "hcd.h" #include "usb.h" +static int usb_match_one_id(struct usb_interface *interface, + const struct usb_device_id *id); + +struct usb_dynid { + struct list_head node; + struct usb_device_id id; +}; + + static int generic_probe(struct device *dev) { return 0; @@ -58,6 +67,96 @@ struct device_driver usb_generic_driver = { * usb device or a usb interface. */ int usb_generic_driver_data; +#ifdef CONFIG_HOTPLUG + +/* + * Adds a new dynamic USBdevice ID to this driver, + * and cause the driver to probe for all devices again. + */ +static ssize_t store_new_id(struct device_driver *driver, + const char *buf, size_t count) +{ + struct usb_driver *usb_drv = to_usb_driver(driver); + struct usb_dynid *dynid; + u32 idVendor = 0; + u32 idProduct = 0; + int fields = 0; + + fields = sscanf(buf, "%x %x", &idVendor, &idProduct); + if (fields < 2) + return -EINVAL; + + dynid = kzalloc(sizeof(*dynid), GFP_KERNEL); + if (!dynid) + return -ENOMEM; + + INIT_LIST_HEAD(&dynid->node); + dynid->id.idVendor = idVendor; + dynid->id.idProduct = idProduct; + dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE; + + spin_lock(&usb_drv->dynids.lock); + list_add_tail(&usb_drv->dynids.list, &dynid->node); + spin_unlock(&usb_drv->dynids.lock); + + if (get_driver(driver)) { + driver_attach(driver); + put_driver(driver); + } + + return count; +} +static DRIVER_ATTR(new_id, S_IWUSR, NULL, store_new_id); + +static int usb_create_newid_file(struct usb_driver *usb_drv) +{ + int error = 0; + + if (usb_drv->probe != NULL) + error = sysfs_create_file(&usb_drv->driver.kobj, + &driver_attr_new_id.attr); + return error; +} + +static void usb_free_dynids(struct usb_driver *usb_drv) +{ + struct usb_dynid *dynid, *n; + + spin_lock(&usb_drv->dynids.lock); + list_for_each_entry_safe(dynid, n, &usb_drv->dynids.list, node) { + list_del(&dynid->node); + kfree(dynid); + } + spin_unlock(&usb_drv->dynids.lock); +} +#else +static inline int usb_create_newid_file(struct usb_driver *usb_drv) +{ + return 0; +} + +static inline void usb_free_dynids(struct usb_driver *usb_drv) +{ +} +#endif + +static const struct usb_device_id *usb_match_dynamic_id(struct usb_interface *intf, + struct usb_driver *drv) +{ + struct usb_dynid *dynid; + + spin_lock(&drv->dynids.lock); + list_for_each_entry(dynid, &drv->dynids.list, node) { + if (usb_match_one_id(intf, &dynid->id)) { + spin_unlock(&drv->dynids.lock); + return &dynid->id; + } + } + spin_unlock(&drv->dynids.lock); + return NULL; +} + + /* called from driver core with usb_bus_type.subsys writelock */ static int usb_probe_interface(struct device *dev) { @@ -75,6 +174,8 @@ static int usb_probe_interface(struct device *dev) return -EHOSTUNREACH; id = usb_match_id(intf, driver->id_table); + if (!id) + id = usb_match_dynamic_id(intf, driver); if (id) { dev_dbg(dev, "%s - got id\n", __FUNCTION__); @@ -120,6 +221,64 @@ static int usb_unbind_interface(struct device *dev) return 0; } +/* returns 0 if no match, 1 if match */ +static int usb_match_one_id(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_host_interface *intf; + struct usb_device *dev; + + /* proc_connectinfo in devio.c may call us with id == NULL. */ + if (id == NULL) + return 0; + + intf = interface->cur_altsetting; + dev = interface_to_usbdev(interface); + + if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && + id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && + id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) + return 0; + + /* No need to test id->bcdDevice_lo != 0, since 0 is never + greater than any unsigned number. */ + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && + (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && + (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && + (id->bDeviceClass != dev->descriptor.bDeviceClass)) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && + (id->bDeviceSubClass!= dev->descriptor.bDeviceSubClass)) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && + (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) && + (id->bInterfaceClass != intf->desc.bInterfaceClass)) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) && + (id->bInterfaceSubClass != intf->desc.bInterfaceSubClass)) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) && + (id->bInterfaceProtocol != intf->desc.bInterfaceProtocol)) + return 0; + + return 1; +} /** * usb_match_id - find first usb_device_id matching device or interface * @interface: the interface of interest @@ -184,16 +343,10 @@ static int usb_unbind_interface(struct device *dev) const struct usb_device_id *usb_match_id(struct usb_interface *interface, const struct usb_device_id *id) { - struct usb_host_interface *intf; - struct usb_device *dev; - /* proc_connectinfo in devio.c may call us with id == NULL. */ if (id == NULL) return NULL; - intf = interface->cur_altsetting; - dev = interface_to_usbdev(interface); - /* It is important to check that id->driver_info is nonzero, since an entry that is all zeroes except for a nonzero id->driver_info is the way to create an entry that @@ -201,50 +354,8 @@ const struct usb_device_id *usb_match_id(struct usb_interface *interface, device and interface. */ for (; id->idVendor || id->bDeviceClass || id->bInterfaceClass || id->driver_info; id++) { - - if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && - id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && - id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) - continue; - - /* No need to test id->bcdDevice_lo != 0, since 0 is never - greater than any unsigned number. */ - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && - (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && - (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && - (id->bDeviceClass != dev->descriptor.bDeviceClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && - (id->bDeviceSubClass!= dev->descriptor.bDeviceSubClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && - (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) && - (id->bInterfaceClass != intf->desc.bInterfaceClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) && - (id->bInterfaceSubClass != intf->desc.bInterfaceSubClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) && - (id->bInterfaceProtocol != intf->desc.bInterfaceProtocol)) - continue; - - return id; + if (usb_match_one_id(interface, id)) + return id; } return NULL; @@ -268,6 +379,9 @@ int usb_device_match(struct device *dev, struct device_driver *drv) if (id) return 1; + id = usb_match_dynamic_id(intf, usb_drv); + if (id) + return 1; return 0; } @@ -296,6 +410,8 @@ int usb_register(struct usb_driver *new_driver) new_driver->driver.probe = usb_probe_interface; new_driver->driver.remove = usb_unbind_interface; new_driver->driver.owner = new_driver->owner; + spin_lock_init(&new_driver->dynids.lock); + INIT_LIST_HEAD(&new_driver->dynids.list); usb_lock_all_devices(); retval = driver_register(&new_driver->driver); @@ -305,6 +421,7 @@ int usb_register(struct usb_driver *new_driver) pr_info("%s: registered new driver %s\n", usbcore_name, new_driver->name); usbfs_update_special(); + usb_create_newid_file(new_driver); } else { printk(KERN_ERR "%s: error %d registering driver %s\n", usbcore_name, retval, new_driver->name); @@ -330,6 +447,7 @@ void usb_deregister(struct usb_driver *driver) pr_info("%s: deregistering driver %s\n", usbcore_name, driver->name); usb_lock_all_devices(); + usb_free_dynids(driver); driver_unregister(&driver->driver); usb_unlock_all_devices(); diff --git a/include/linux/usb.h b/include/linux/usb.h index d81b050e5955..0dd96ef78c13 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -529,6 +529,11 @@ static inline int usb_make_path (struct usb_device *dev, char *buf, /* ----------------------------------------------------------------------- */ +struct usb_dynids { + spinlock_t lock; + struct list_head list; +}; + /** * struct usb_driver - identifies USB driver to usbcore * @owner: Pointer to the module owner of this driver; initialize @@ -553,6 +558,8 @@ static inline int usb_make_path (struct usb_device *dev, char *buf, * @id_table: USB drivers use ID table to support hotplugging. * Export this with MODULE_DEVICE_TABLE(usb,...). This must be set * or your driver's probe function will never get called. + * @dynids: used internally to hold the list of dynamically added device + * ids for this driver. * @driver: the driver model core driver structure. * * USB drivers must provide a name, probe() and disconnect() methods, @@ -588,6 +595,7 @@ struct usb_driver { const struct usb_device_id *id_table; + struct usb_dynids dynids; struct device_driver driver; }; #define to_usb_driver(d) container_of(d, struct usb_driver, driver) -- cgit v1.2.3 From ba9dc657af86d05d2971633e57d1f6f94ed60472 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 16 Nov 2005 13:41:28 -0800 Subject: [PATCH] USB: allow usb drivers to disable dynamic ids This lets drivers, like the usb-serial ones, disable the ability to add ids from sysfs. The usb-serial drivers are "odd" in that they are really usb-serial bus drivers, not usb bus drivers, so the dynamic id logic will have to go into the usb-serial bus core for those drivers to get that ability. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 19 +++++++++++++++++++ drivers/usb/serial/airprime.c | 1 + drivers/usb/serial/anydata.c | 1 + drivers/usb/serial/belkin_sa.c | 1 + drivers/usb/serial/cp2101.c | 1 + drivers/usb/serial/cyberjack.c | 1 + drivers/usb/serial/cypress_m8.c | 1 + drivers/usb/serial/digi_acceleport.c | 1 + drivers/usb/serial/empeg.c | 1 + drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/garmin_gps.c | 1 + drivers/usb/serial/generic.c | 1 + drivers/usb/serial/hp4x.c | 1 + drivers/usb/serial/io_edgeport.c | 1 + drivers/usb/serial/io_ti.c | 1 + drivers/usb/serial/ipaq.c | 1 + drivers/usb/serial/ipw.c | 1 + drivers/usb/serial/ir-usb.c | 1 + drivers/usb/serial/keyspan.h | 1 + drivers/usb/serial/keyspan_pda.c | 1 + drivers/usb/serial/kl5kusb105.c | 1 + drivers/usb/serial/kobil_sct.c | 1 + drivers/usb/serial/mct_u232.c | 1 + drivers/usb/serial/omninet.c | 1 + drivers/usb/serial/option.c | 1 + drivers/usb/serial/pl2303.c | 1 + drivers/usb/serial/safe_serial.c | 1 + drivers/usb/serial/ti_usb_3410_5052.c | 1 + drivers/usb/serial/usb-serial.c | 1 + drivers/usb/serial/visor.c | 1 + drivers/usb/serial/whiteheat.c | 1 + include/linux/usb.h | 3 +++ 32 files changed, 52 insertions(+) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 1c0611045379..5e65bc258e1b 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -112,12 +112,26 @@ static int usb_create_newid_file(struct usb_driver *usb_drv) { int error = 0; + if (usb_drv->no_dynamic_id) + goto exit; + if (usb_drv->probe != NULL) error = sysfs_create_file(&usb_drv->driver.kobj, &driver_attr_new_id.attr); +exit: return error; } +static void usb_remove_newid_file(struct usb_driver *usb_drv) +{ + if (usb_drv->no_dynamic_id) + return; + + if (usb_drv->probe != NULL) + sysfs_remove_file(&usb_drv->driver.kobj, + &driver_attr_new_id.attr); +} + static void usb_free_dynids(struct usb_driver *usb_drv) { struct usb_dynid *dynid, *n; @@ -135,6 +149,10 @@ static inline int usb_create_newid_file(struct usb_driver *usb_drv) return 0; } +static void usb_remove_newid_file(struct usb_driver *usb_drv) +{ +} + static inline void usb_free_dynids(struct usb_driver *usb_drv) { } @@ -447,6 +465,7 @@ void usb_deregister(struct usb_driver *driver) pr_info("%s: deregistering driver %s\n", usbcore_name, driver->name); usb_lock_all_devices(); + usb_remove_newid_file(driver); usb_free_dynids(driver); driver_unregister(&driver->driver); usb_unlock_all_devices(); diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 1f29d8837327..2ef9945a6c07 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -28,6 +28,7 @@ static struct usb_driver airprime_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; static struct usb_serial_driver airprime_device = { diff --git a/drivers/usb/serial/anydata.c b/drivers/usb/serial/anydata.c index 18022a74a3dc..7a171e034b59 100644 --- a/drivers/usb/serial/anydata.c +++ b/drivers/usb/serial/anydata.c @@ -32,6 +32,7 @@ static struct usb_driver anydata_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; static int anydata_open(struct usb_serial_port *port, struct file *filp) diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 84bc0ee4f061..69039bd9fc5e 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -118,6 +118,7 @@ static struct usb_driver belkin_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; /* All of the device info needed for the serial converters */ diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index c9787001cf2a..813bab37e076 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -72,6 +72,7 @@ static struct usb_driver cp2101_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; static struct usb_serial_driver cp2101_device = { diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index e581e4ae8483..8c10e4004905 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -81,6 +81,7 @@ static struct usb_driver cyberjack_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; static struct usb_serial_driver cyberjack_device = { diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index af9290ed257b..af18355e94cc 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -112,6 +112,7 @@ static struct usb_driver cypress_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; struct cypress_private { diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index dc74644a603d..c50cec95f49b 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -498,6 +498,7 @@ static struct usb_driver digi_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 0b0546dcc7b9..e5e40064caf2 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -110,6 +110,7 @@ static struct usb_driver empeg_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; static struct usb_serial_driver empeg_device = { diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 06e04b442ff1..857fe791d702 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -488,6 +488,7 @@ static struct usb_driver ftdi_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; static char *ftdi_chip_name[] = { diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 35820bda7ae1..198a322286f9 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -227,6 +227,7 @@ static struct usb_driver garmin_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 53a47c31cd0e..c00a440dc421 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -73,6 +73,7 @@ static struct usb_driver generic_driver = { .probe = generic_probe, .disconnect = usb_serial_disconnect, .id_table = generic_serial_ids, + .no_dynamic_id = 1, }; #endif diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index 8eadfb705601..e588c3fe632d 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -42,6 +42,7 @@ static struct usb_driver hp49gp_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; static struct usb_serial_driver hp49gp_device = { diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index dc4c498bd1ed..276bd425a474 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -247,6 +247,7 @@ static struct usb_driver io_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; /* function prototypes for all of our local functions */ diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 832b6d6734c0..8b2e4c78abcd 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -221,6 +221,7 @@ static struct usb_driver io_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index d5d066488100..efb568be7015 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -547,6 +547,7 @@ static struct usb_driver ipaq_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = ipaq_id_table, + .no_dynamic_id = 1, }; diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 7744b8148bc5..64e2cda2a84a 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -157,6 +157,7 @@ static struct usb_driver usb_ipw_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = usb_ipw_ids, + .no_dynamic_id = 1, }; static int debug; diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 19f329e9bdcf..647431c1ccb1 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -130,6 +130,7 @@ static struct usb_driver ir_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 5cfc13b5e56f..4e6f626f6062 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -525,6 +525,7 @@ static struct usb_driver keyspan_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = keyspan_ids_combined, + .no_dynamic_id = 1, }; /* usb_device_id table for the pre-firmware download keyspan devices */ diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index cd4f48bd83b6..0d1f15268549 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -155,6 +155,7 @@ static struct usb_driver keyspan_pda_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; static struct usb_device_id id_table_std [] = { diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index a8951c0fd020..bd68638b7c35 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -121,6 +121,7 @@ static struct usb_driver kl5kusb105d_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; static struct usb_serial_driver kl5kusb105d_device = { diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 9456dd9dd136..4c853afea385 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -102,6 +102,7 @@ static struct usb_driver kobil_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index ca5dbadb9b7e..b0415e7542c4 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -130,6 +130,7 @@ static struct usb_driver mct_u232_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; static struct usb_serial_driver mct_u232_device = { diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 3caf97072ac0..b595befb24cf 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -85,6 +85,7 @@ static struct usb_driver omninet_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 7716000045b7..4ee657eaaa0b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -100,6 +100,7 @@ static struct usb_driver option_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = option_ids, + .no_dynamic_id = 1, }; /* The card has three separate interfaces, wich the serial driver diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 41a45a5025b2..e302a320444c 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -87,6 +87,7 @@ static struct usb_driver pl2303_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; #define SET_LINE_REQUEST_TYPE 0x21 diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index c22bdc0c4dfd..f8241c152043 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -165,6 +165,7 @@ static struct usb_driver safe_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; static __u16 crc10_table[256] = { diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 205dbf7201da..17a1f09483bd 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -253,6 +253,7 @@ static struct usb_driver ti_usb_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = ti_id_table_combined, + .no_dynamic_id = 1, }; static struct usb_serial_driver ti_1port_device = { diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 0c4881d18cd5..2ac37b52485a 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -46,6 +46,7 @@ static struct usb_driver usb_serial_driver = { .name = "usbserial", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, + .no_dynamic_id = 1, }; /* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index a473c1c34559..2973f5564c06 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -178,6 +178,7 @@ static struct usb_driver visor_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; /* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */ diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 18c3183be769..19c6386bb692 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -132,6 +132,7 @@ static struct usb_driver whiteheat_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */ diff --git a/include/linux/usb.h b/include/linux/usb.h index 0dd96ef78c13..8d5829936bc4 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -561,6 +561,8 @@ struct usb_dynids { * @dynids: used internally to hold the list of dynamically added device * ids for this driver. * @driver: the driver model core driver structure. + * @no_dynamic_id: if set to 1, the USB core will not allow dynamic ids to be + * added to this driver by preventing the sysfs file from being created. * * USB drivers must provide a name, probe() and disconnect() methods, * and an id_table. Other driver fields are optional. @@ -597,6 +599,7 @@ struct usb_driver { struct usb_dynids dynids; struct device_driver driver; + unsigned int no_dynamic_id:1; }; #define to_usb_driver(d) container_of(d, struct usb_driver, driver) -- cgit v1.2.3 From 2143acc6dc79bdbff812f02a7dc5ab9d4fc81fc8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 21 Nov 2005 14:53:03 -0800 Subject: [PATCH] USB: make registering a usb driver automatically set the module owner This fixes the driver that forgot to set the module owner up. Now we can remove the unneeded pointer from the usb driver structure. The idea for how to do this was from Al Viro, who did this for the PCI drivers. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 9 +++++---- include/linux/usb.h | 6 +++++- 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 5e65bc258e1b..bb139f06bcd6 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -404,8 +404,9 @@ int usb_device_match(struct device *dev, struct device_driver *drv) } /** - * usb_register - register a USB driver + * usb_register_driver - register a USB driver * @new_driver: USB operations for the driver + * @owner: module owner of this driver. * * Registers a USB driver with the USB core. The list of unattached * interfaces will be rescanned whenever a new driver is added, allowing @@ -416,7 +417,7 @@ int usb_device_match(struct device *dev, struct device_driver *drv) * usb_register_dev() to enable that functionality. This function no longer * takes care of that. */ -int usb_register(struct usb_driver *new_driver) +int usb_register_driver(struct usb_driver *new_driver, struct module *owner) { int retval = 0; @@ -427,7 +428,7 @@ int usb_register(struct usb_driver *new_driver) new_driver->driver.bus = &usb_bus_type; new_driver->driver.probe = usb_probe_interface; new_driver->driver.remove = usb_unbind_interface; - new_driver->driver.owner = new_driver->owner; + new_driver->driver.owner = owner; spin_lock_init(&new_driver->dynids.lock); INIT_LIST_HEAD(&new_driver->dynids.list); @@ -447,7 +448,7 @@ int usb_register(struct usb_driver *new_driver) return retval; } -EXPORT_SYMBOL_GPL(usb_register); +EXPORT_SYMBOL_GPL(usb_register_driver); /** * usb_deregister - unregister a USB driver diff --git a/include/linux/usb.h b/include/linux/usb.h index 8d5829936bc4..3d05c63451a8 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -625,7 +625,11 @@ struct usb_class_driver { * use these in module_init()/module_exit() * and don't forget MODULE_DEVICE_TABLE(usb, ...) */ -extern int usb_register(struct usb_driver *); +int usb_register_driver(struct usb_driver *, struct module *); +static inline int usb_register(struct usb_driver *driver) +{ + return usb_register_driver(driver, THIS_MODULE); +} extern void usb_deregister(struct usb_driver *); extern int usb_register_dev(struct usb_interface *intf, -- cgit v1.2.3 From 75318d2d7cab77b14c5d3dbd5e69f2680a769e16 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 21 Nov 2005 14:53:03 -0800 Subject: [PATCH] USB: remove .owner field from struct usb_driver It is no longer needed, so let's remove it, saving a bit of memory. Signed-off-by: Greg Kroah-Hartman --- drivers/block/ub.c | 1 - drivers/bluetooth/bcm203x.c | 1 - drivers/bluetooth/bfusb.c | 1 - drivers/bluetooth/bpa10x.c | 1 - drivers/bluetooth/hci_usb.c | 1 - drivers/char/watchdog/pcwd_usb.c | 1 - drivers/input/joystick/iforce/iforce-usb.c | 1 - drivers/isdn/hisax/hfc_usb.c | 1 - drivers/isdn/hisax/st5481_init.c | 1 - drivers/media/dvb/b2c2/flexcop-usb.c | 1 - drivers/media/dvb/cinergyT2/cinergyT2.c | 1 - drivers/media/dvb/dvb-usb/a800.c | 1 - drivers/media/dvb/dvb-usb/cxusb.c | 1 - drivers/media/dvb/dvb-usb/dibusb-mb.c | 1 - drivers/media/dvb/dvb-usb/dibusb-mc.c | 1 - drivers/media/dvb/dvb-usb/digitv.c | 1 - drivers/media/dvb/dvb-usb/dtt200u.c | 1 - drivers/media/dvb/dvb-usb/nova-t-usb2.c | 1 - drivers/media/dvb/dvb-usb/umt-010.c | 1 - drivers/media/dvb/dvb-usb/vp702x.c | 1 - drivers/media/dvb/dvb-usb/vp7045.c | 1 - drivers/media/video/cpia_usb.c | 1 - drivers/media/video/em28xx/em28xx-video.c | 1 - drivers/net/irda/irda-usb.c | 1 - drivers/net/irda/stir4200.c | 1 - drivers/usb/atm/cxacru.c | 1 - drivers/usb/atm/speedtch.c | 1 - drivers/usb/atm/ueagle-atm.c | 1 - drivers/usb/atm/xusbatm.c | 1 - drivers/usb/class/audio.c | 1 - drivers/usb/class/cdc-acm.c | 1 - drivers/usb/class/usb-midi.c | 1 - drivers/usb/class/usblp.c | 1 - drivers/usb/core/devio.c | 1 - drivers/usb/core/hub.c | 1 - drivers/usb/image/mdc800.c | 1 - drivers/usb/image/microtek.c | 1 - drivers/usb/input/acecad.c | 1 - drivers/usb/input/aiptek.c | 1 - drivers/usb/input/appletouch.c | 1 - drivers/usb/input/ati_remote.c | 1 - drivers/usb/input/hid-core.c | 1 - drivers/usb/input/hiddev.c | 1 - drivers/usb/input/itmtouch.c | 1 - drivers/usb/input/kbtab.c | 1 - drivers/usb/input/keyspan_remote.c | 1 - drivers/usb/input/mtouchusb.c | 1 - drivers/usb/input/powermate.c | 1 - drivers/usb/input/touchkitusb.c | 1 - drivers/usb/input/usbkbd.c | 1 - drivers/usb/input/usbmouse.c | 1 - drivers/usb/input/wacom.c | 1 - drivers/usb/input/xpad.c | 1 - drivers/usb/input/yealink.c | 1 - drivers/usb/media/dabusb.c | 1 - drivers/usb/media/dsbr100.c | 1 - drivers/usb/media/ov511.c | 1 - drivers/usb/media/pwc/pwc-if.c | 1 - drivers/usb/media/se401.c | 1 - drivers/usb/media/sn9c102_core.c | 1 - drivers/usb/media/stv680.c | 1 - drivers/usb/media/vicam.c | 1 - drivers/usb/media/w9968cf.c | 1 - drivers/usb/misc/auerswald.c | 1 - drivers/usb/misc/cytherm.c | 1 - drivers/usb/misc/emi26.c | 1 - drivers/usb/misc/emi62.c | 1 - drivers/usb/misc/idmouse.c | 1 - drivers/usb/misc/ldusb.c | 1 - drivers/usb/misc/legousbtower.c | 1 - drivers/usb/misc/phidgetkit.c | 1 - drivers/usb/misc/phidgetservo.c | 1 - drivers/usb/misc/rio500.c | 1 - drivers/usb/misc/sisusbvga/sisusb.c | 1 - drivers/usb/misc/usblcd.c | 1 - drivers/usb/misc/usbled.c | 1 - drivers/usb/misc/usbtest.c | 1 - drivers/usb/misc/uss720.c | 1 - drivers/usb/net/asix.c | 1 - drivers/usb/net/catc.c | 1 - drivers/usb/net/cdc_ether.c | 1 - drivers/usb/net/cdc_subset.c | 1 - drivers/usb/net/gl620a.c | 1 - drivers/usb/net/kaweth.c | 1 - drivers/usb/net/net1080.c | 1 - drivers/usb/net/plusb.c | 1 - drivers/usb/net/rndis_host.c | 1 - drivers/usb/net/rtl8150.c | 1 - drivers/usb/net/zaurus.c | 1 - drivers/usb/net/zd1201.c | 1 - drivers/usb/serial/airprime.c | 1 - drivers/usb/serial/anydata.c | 1 - drivers/usb/serial/belkin_sa.c | 1 - drivers/usb/serial/cp2101.c | 1 - drivers/usb/serial/cyberjack.c | 1 - drivers/usb/serial/digi_acceleport.c | 1 - drivers/usb/serial/empeg.c | 1 - drivers/usb/serial/garmin_gps.c | 1 - drivers/usb/serial/generic.c | 1 - drivers/usb/serial/hp4x.c | 1 - drivers/usb/serial/io_edgeport.c | 1 - drivers/usb/serial/io_ti.c | 1 - drivers/usb/serial/ipaq.c | 1 - drivers/usb/serial/ipw.c | 1 - drivers/usb/serial/ir-usb.c | 1 - drivers/usb/serial/keyspan.h | 1 - drivers/usb/serial/keyspan_pda.c | 1 - drivers/usb/serial/kl5kusb105.c | 1 - drivers/usb/serial/kobil_sct.c | 1 - drivers/usb/serial/mct_u232.c | 1 - drivers/usb/serial/omninet.c | 1 - drivers/usb/serial/option.c | 1 - drivers/usb/serial/pl2303.c | 1 - drivers/usb/serial/safe_serial.c | 1 - drivers/usb/serial/ti_usb_3410_5052.c | 1 - drivers/usb/serial/usb-serial.c | 1 - drivers/usb/serial/visor.c | 1 - drivers/usb/serial/whiteheat.c | 1 - drivers/usb/storage/libusual.c | 1 - drivers/usb/storage/usb.c | 1 - drivers/usb/usb-skeleton.c | 1 - drivers/w1/dscore.c | 1 - include/linux/usb.h | 4 ---- sound/usb/usbaudio.c | 1 - sound/usb/usx2y/usbusx2y.c | 1 - 125 files changed, 128 deletions(-) diff --git a/drivers/block/ub.c b/drivers/block/ub.c index 06d741d58a68..c7a28f5be42f 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -2460,7 +2460,6 @@ static void ub_disconnect(struct usb_interface *intf) } static struct usb_driver ub_driver = { - .owner = THIS_MODULE, .name = "ub", .probe = ub_probe, .disconnect = ub_disconnect, diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c index 8e7fb3551775..3e7a067cc087 100644 --- a/drivers/bluetooth/bcm203x.c +++ b/drivers/bluetooth/bcm203x.c @@ -275,7 +275,6 @@ static void bcm203x_disconnect(struct usb_interface *intf) } static struct usb_driver bcm203x_driver = { - .owner = THIS_MODULE, .name = "bcm203x", .probe = bcm203x_probe, .disconnect = bcm203x_disconnect, diff --git a/drivers/bluetooth/bfusb.c b/drivers/bluetooth/bfusb.c index 067e27893e4a..8947c8837dac 100644 --- a/drivers/bluetooth/bfusb.c +++ b/drivers/bluetooth/bfusb.c @@ -768,7 +768,6 @@ static void bfusb_disconnect(struct usb_interface *intf) } static struct usb_driver bfusb_driver = { - .owner = THIS_MODULE, .name = "bfusb", .probe = bfusb_probe, .disconnect = bfusb_disconnect, diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c index 394796315adc..9446960ac742 100644 --- a/drivers/bluetooth/bpa10x.c +++ b/drivers/bluetooth/bpa10x.c @@ -619,7 +619,6 @@ static void bpa10x_disconnect(struct usb_interface *intf) } static struct usb_driver bpa10x_driver = { - .owner = THIS_MODULE, .name = "bpa10x", .probe = bpa10x_probe, .disconnect = bpa10x_disconnect, diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c index 057cb2b6e6d1..92382e823285 100644 --- a/drivers/bluetooth/hci_usb.c +++ b/drivers/bluetooth/hci_usb.c @@ -1044,7 +1044,6 @@ static void hci_usb_disconnect(struct usb_interface *intf) } static struct usb_driver hci_usb_driver = { - .owner = THIS_MODULE, .name = "hci_usb", .probe = hci_usb_probe, .disconnect = hci_usb_disconnect, diff --git a/drivers/char/watchdog/pcwd_usb.c b/drivers/char/watchdog/pcwd_usb.c index 092e9b133750..1533f56baa42 100644 --- a/drivers/char/watchdog/pcwd_usb.c +++ b/drivers/char/watchdog/pcwd_usb.c @@ -151,7 +151,6 @@ static void usb_pcwd_disconnect (struct usb_interface *interface); /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver usb_pcwd_driver = { - .owner = THIS_MODULE, .name = DRIVER_NAME, .probe = usb_pcwd_probe, .disconnect = usb_pcwd_disconnect, diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index 64b4a3080985..bc2fce60f9f8 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -235,7 +235,6 @@ static struct usb_device_id iforce_usb_ids [] = { MODULE_DEVICE_TABLE (usb, iforce_usb_ids); struct usb_driver iforce_usb_driver = { - .owner = THIS_MODULE, .name = "iforce", .probe = iforce_usb_probe, .disconnect = iforce_usb_disconnect, diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index f8457ef48826..ca5b4a3b683e 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -1715,7 +1715,6 @@ hfc_usb_disconnect(struct usb_interface /* our driver information structure */ /************************************/ static struct usb_driver hfc_drv = { - .owner = THIS_MODULE, .name = "hfc_usb", .id_table = hfcusb_idtab, .probe = hfc_usb_probe, diff --git a/drivers/isdn/hisax/st5481_init.c b/drivers/isdn/hisax/st5481_init.c index 8e192a3a3490..99cb0f3d59a1 100644 --- a/drivers/isdn/hisax/st5481_init.c +++ b/drivers/isdn/hisax/st5481_init.c @@ -180,7 +180,6 @@ static struct usb_device_id st5481_ids[] = { MODULE_DEVICE_TABLE (usb, st5481_ids); static struct usb_driver st5481_usb_driver = { - .owner = THIS_MODULE, .name = "st5481_usb", .probe = probe_st5481, .disconnect = disconnect_st5481, diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c index 0a78ba3737a5..a6c91db40ad6 100644 --- a/drivers/media/dvb/b2c2/flexcop-usb.c +++ b/drivers/media/dvb/b2c2/flexcop-usb.c @@ -544,7 +544,6 @@ static struct usb_device_id flexcop_usb_table [] = { /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver flexcop_usb_driver = { - .owner = THIS_MODULE, .name = "b2c2_flexcop_usb", .probe = flexcop_usb_probe, .disconnect = flexcop_usb_disconnect, diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c index 336fc284fa52..b996fb59b7e4 100644 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -986,7 +986,6 @@ static const struct usb_device_id cinergyt2_table [] __devinitdata = { MODULE_DEVICE_TABLE(usb, cinergyt2_table); static struct usb_driver cinergyt2_driver = { - .owner = THIS_MODULE, .name = "cinergyT2", .probe = cinergyt2_probe, .disconnect = cinergyt2_disconnect, diff --git a/drivers/media/dvb/dvb-usb/a800.c b/drivers/media/dvb/dvb-usb/a800.c index 8c7beffb045f..ce44aa6bbb83 100644 --- a/drivers/media/dvb/dvb-usb/a800.c +++ b/drivers/media/dvb/dvb-usb/a800.c @@ -144,7 +144,6 @@ static struct dvb_usb_properties a800_properties = { }; static struct usb_driver a800_driver = { - .owner = THIS_MODULE, .name = "dvb_usb_a800", .probe = a800_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index 3fe383f4bb4c..d05fab01cccd 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -241,7 +241,6 @@ static struct dvb_usb_properties cxusb_properties = { }; static struct usb_driver cxusb_driver = { - .owner = THIS_MODULE, .name = "dvb_usb_cxusb", .probe = cxusb_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c index aa271a2496d5..52ac3e5adf5d 100644 --- a/drivers/media/dvb/dvb-usb/dibusb-mb.c +++ b/drivers/media/dvb/dvb-usb/dibusb-mb.c @@ -373,7 +373,6 @@ static struct dvb_usb_properties artec_t1_usb2_properties = { }; static struct usb_driver dibusb_driver = { - .owner = THIS_MODULE, .name = "dvb_usb_dibusb_mb", .probe = dibusb_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/dvb/dvb-usb/dibusb-mc.c b/drivers/media/dvb/dvb-usb/dibusb-mc.c index 6a0912eab396..55802fba3c29 100644 --- a/drivers/media/dvb/dvb-usb/dibusb-mc.c +++ b/drivers/media/dvb/dvb-usb/dibusb-mc.c @@ -82,7 +82,6 @@ static struct dvb_usb_properties dibusb_mc_properties = { }; static struct usb_driver dibusb_mc_driver = { - .owner = THIS_MODULE, .name = "dvb_usb_dibusb_mc", .probe = dibusb_mc_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c index f98e306a5759..450417a9e64b 100644 --- a/drivers/media/dvb/dvb-usb/digitv.c +++ b/drivers/media/dvb/dvb-usb/digitv.c @@ -233,7 +233,6 @@ static struct dvb_usb_properties digitv_properties = { }; static struct usb_driver digitv_driver = { - .owner = THIS_MODULE, .name = "dvb_usb_digitv", .probe = digitv_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/dvb/dvb-usb/dtt200u.c b/drivers/media/dvb/dvb-usb/dtt200u.c index b595476332cd..6e2bac873445 100644 --- a/drivers/media/dvb/dvb-usb/dtt200u.c +++ b/drivers/media/dvb/dvb-usb/dtt200u.c @@ -198,7 +198,6 @@ static struct dvb_usb_properties wt220u_properties = { /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver dtt200u_usb_driver = { - .owner = THIS_MODULE, .name = "dvb_usb_dtt200u", .probe = dtt200u_usb_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/dvb/dvb-usb/nova-t-usb2.c b/drivers/media/dvb/dvb-usb/nova-t-usb2.c index 1841a66427bf..fac48fc7a4ac 100644 --- a/drivers/media/dvb/dvb-usb/nova-t-usb2.c +++ b/drivers/media/dvb/dvb-usb/nova-t-usb2.c @@ -202,7 +202,6 @@ static struct dvb_usb_properties nova_t_properties = { }; static struct usb_driver nova_t_driver = { - .owner = THIS_MODULE, .name = "dvb_usb_nova_t_usb2", .probe = nova_t_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/dvb/dvb-usb/umt-010.c b/drivers/media/dvb/dvb-usb/umt-010.c index 6fd67657c269..14f1911c79bb 100644 --- a/drivers/media/dvb/dvb-usb/umt-010.c +++ b/drivers/media/dvb/dvb-usb/umt-010.c @@ -128,7 +128,6 @@ static struct dvb_usb_properties umt_properties = { }; static struct usb_driver umt_driver = { - .owner = THIS_MODULE, .name = "dvb_usb_umt_010", .probe = umt_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/dvb/dvb-usb/vp702x.c b/drivers/media/dvb/dvb-usb/vp702x.c index de13c04e8e64..afa00fdb5ec0 100644 --- a/drivers/media/dvb/dvb-usb/vp702x.c +++ b/drivers/media/dvb/dvb-usb/vp702x.c @@ -256,7 +256,6 @@ static struct dvb_usb_properties vp702x_properties = { /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver vp702x_usb_driver = { - .owner = THIS_MODULE, .name = "dvb-usb-vp702x", .probe = vp702x_usb_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c index 75765e3a569c..3835235b68df 100644 --- a/drivers/media/dvb/dvb-usb/vp7045.c +++ b/drivers/media/dvb/dvb-usb/vp7045.c @@ -253,7 +253,6 @@ static struct dvb_usb_properties vp7045_properties = { /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver vp7045_usb_driver = { - .owner = THIS_MODULE, .name = "dvb_usb_vp7045", .probe = vp7045_usb_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/video/cpia_usb.c b/drivers/media/video/cpia_usb.c index 9774e94d1e7d..1439cb752874 100644 --- a/drivers/media/video/cpia_usb.c +++ b/drivers/media/video/cpia_usb.c @@ -582,7 +582,6 @@ MODULE_LICENSE("GPL"); static struct usb_driver cpia_driver = { - .owner = THIS_MODULE, .name = "cpia", .probe = cpia_probe, .disconnect = cpia_disconnect, diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 06d76879bde2..3a56120397ae 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1884,7 +1884,6 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) } static struct usb_driver em28xx_usb_driver = { - .owner = THIS_MODULE, .name = "em28xx", .probe = em28xx_usb_probe, .disconnect = em28xx_usb_disconnect, diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index c22c0517883c..fa176ffb4ad5 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -1539,7 +1539,6 @@ static void irda_usb_disconnect(struct usb_interface *intf) * USB device callbacks */ static struct usb_driver irda_driver = { - .owner = THIS_MODULE, .name = "irda-usb", .probe = irda_usb_probe, .disconnect = irda_usb_disconnect, diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c index 3961a754e920..31867e4b891b 100644 --- a/drivers/net/irda/stir4200.c +++ b/drivers/net/irda/stir4200.c @@ -1152,7 +1152,6 @@ static int stir_resume(struct usb_interface *intf) * USB device callbacks */ static struct usb_driver irda_driver = { - .owner = THIS_MODULE, .name = "stir4200", .probe = stir_probe, .disconnect = stir_disconnect, diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 9d59dc62e6d2..af0a41e7870e 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -853,7 +853,6 @@ static int cxacru_usb_probe(struct usb_interface *intf, const struct usb_device_ } static struct usb_driver cxacru_usb_driver = { - .owner = THIS_MODULE, .name = cxacru_driver_name, .probe = cxacru_usb_probe, .disconnect = usbatm_usb_disconnect, diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index d0cbbb7f0385..b28336148658 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -659,7 +659,6 @@ MODULE_DEVICE_TABLE(usb, speedtch_usb_ids); static int speedtch_usb_probe(struct usb_interface *, const struct usb_device_id *); static struct usb_driver speedtch_usb_driver = { - .owner = THIS_MODULE, .name = speedtch_driver_name, .probe = speedtch_usb_probe, .disconnect = usbatm_usb_disconnect, diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index be08e16df09f..7d2a679989ed 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -1776,7 +1776,6 @@ static const struct usb_device_id uea_ids[] = { * USB driver descriptor */ static struct usb_driver uea_driver = { - .owner = THIS_MODULE, .name = "ueagle-atm", .id_table = uea_ids, .probe = uea_probe, diff --git a/drivers/usb/atm/xusbatm.c b/drivers/usb/atm/xusbatm.c index 7fe7fb484d10..5c76e3aaaa5e 100644 --- a/drivers/usb/atm/xusbatm.c +++ b/drivers/usb/atm/xusbatm.c @@ -140,7 +140,6 @@ static int xusbatm_usb_probe(struct usb_interface *intf, } static struct usb_driver xusbatm_usb_driver = { - .owner = THIS_MODULE, .name = xusbatm_driver_name, .probe = xusbatm_usb_probe, .disconnect = usbatm_usb_disconnect, diff --git a/drivers/usb/class/audio.c b/drivers/usb/class/audio.c index 50858273f8d3..3ad9ee8b84a9 100644 --- a/drivers/usb/class/audio.c +++ b/drivers/usb/class/audio.c @@ -2732,7 +2732,6 @@ static struct usb_device_id usb_audio_ids [] = { MODULE_DEVICE_TABLE (usb, usb_audio_ids); static struct usb_driver usb_audio_driver = { - .owner = THIS_MODULE, .name = "audio", .probe = usb_audio_probe, .disconnect = usb_audio_disconnect, diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 72936dc15ec9..93de121f52a8 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1088,7 +1088,6 @@ static struct usb_device_id acm_ids[] = { MODULE_DEVICE_TABLE (usb, acm_ids); static struct usb_driver acm_driver = { - .owner = THIS_MODULE, .name = "cdc_acm", .probe = acm_probe, .disconnect = acm_disconnect, diff --git a/drivers/usb/class/usb-midi.c b/drivers/usb/class/usb-midi.c index 5f8af35e7633..f13f004d311f 100644 --- a/drivers/usb/class/usb-midi.c +++ b/drivers/usb/class/usb-midi.c @@ -2027,7 +2027,6 @@ static struct usb_device_id id_table[] = { }; static struct usb_driver usb_midi_driver = { - .owner = THIS_MODULE, .name = "midi", .probe = usb_midi_probe, .disconnect = usb_midi_disconnect, diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 357e75335f17..10406b857ac7 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -1186,7 +1186,6 @@ static struct usb_device_id usblp_ids [] = { MODULE_DEVICE_TABLE (usb, usblp_ids); static struct usb_driver usblp_driver = { - .owner = THIS_MODULE, .name = "usblp", .probe = usblp_probe, .disconnect = usblp_disconnect, diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index b1d6e9af732d..3a73170e95dd 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -402,7 +402,6 @@ static void driver_disconnect(struct usb_interface *intf) } struct usb_driver usbfs_driver = { - .owner = THIS_MODULE, .name = "usbfs", .probe = driver_probe, .disconnect = driver_disconnect, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 5faf7edd73cb..40c6c50c6bd9 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2865,7 +2865,6 @@ static struct usb_device_id hub_id_table [] = { MODULE_DEVICE_TABLE (usb, hub_id_table); static struct usb_driver hub_driver = { - .owner = THIS_MODULE, .name = "hub", .probe = hub_probe, .disconnect = hub_disconnect, diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index 1d973bcf56aa..049871145d63 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -962,7 +962,6 @@ MODULE_DEVICE_TABLE (usb, mdc800_table); */ static struct usb_driver mdc800_usb_driver = { - .owner = THIS_MODULE, .name = "mdc800", .probe = mdc800_usb_probe, .disconnect = mdc800_usb_disconnect, diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 950543aa5ac7..458f2acdeb0a 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -160,7 +160,6 @@ static void mts_usb_disconnect(struct usb_interface *intf); static struct usb_device_id mts_usb_ids []; static struct usb_driver mts_usb_driver = { - .owner = THIS_MODULE, .name = "microtekX6", .probe = mts_usb_probe, .disconnect = mts_usb_disconnect, diff --git a/drivers/usb/input/acecad.c b/drivers/usb/input/acecad.c index a32558b4048e..df29b8078b54 100644 --- a/drivers/usb/input/acecad.c +++ b/drivers/usb/input/acecad.c @@ -261,7 +261,6 @@ static struct usb_device_id usb_acecad_id_table [] = { MODULE_DEVICE_TABLE(usb, usb_acecad_id_table); static struct usb_driver usb_acecad_driver = { - .owner = THIS_MODULE, .name = "usb_acecad", .probe = usb_acecad_probe, .disconnect = usb_acecad_disconnect, diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c index 0e2505c073db..356284c746a0 100644 --- a/drivers/usb/input/aiptek.c +++ b/drivers/usb/input/aiptek.c @@ -2190,7 +2190,6 @@ fail1: input_free_device(inputdev); static void aiptek_disconnect(struct usb_interface *intf); static struct usb_driver aiptek_driver = { - .owner = THIS_MODULE, .name = "aiptek", .probe = aiptek_probe, .disconnect = aiptek_disconnect, diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c index 15840db092a5..1949b54f41f2 100644 --- a/drivers/usb/input/appletouch.c +++ b/drivers/usb/input/appletouch.c @@ -452,7 +452,6 @@ static int atp_resume(struct usb_interface *iface) } static struct usb_driver atp_driver = { - .owner = THIS_MODULE, .name = "appletouch", .probe = atp_probe, .disconnect = atp_disconnect, diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index 9a2a47db9494..8948e5c3941f 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -295,7 +295,6 @@ static void ati_remote_disconnect (struct usb_interface *interface); /* usb specific object to register with the usb subsystem */ static struct usb_driver ati_remote_driver = { - .owner = THIS_MODULE, .name = "ati_remote", .probe = ati_remote_probe, .disconnect = ati_remote_disconnect, diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index a3e44ef1df43..256d7325d4a5 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1930,7 +1930,6 @@ static struct usb_device_id hid_usb_ids [] = { MODULE_DEVICE_TABLE (usb, hid_usb_ids); static struct usb_driver hid_driver = { - .owner = THIS_MODULE, .name = "usbhid", .probe = hid_probe, .disconnect = hid_disconnect, diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c index 440377c7a0da..4dff8473553d 100644 --- a/drivers/usb/input/hiddev.c +++ b/drivers/usb/input/hiddev.c @@ -826,7 +826,6 @@ static int hiddev_usbd_probe(struct usb_interface *intf, static /* const */ struct usb_driver hiddev_driver = { - .owner = THIS_MODULE, .name = "hiddev", .probe = hiddev_usbd_probe, }; diff --git a/drivers/usb/input/itmtouch.c b/drivers/usb/input/itmtouch.c index 4a50acb39d29..7618ae5c104f 100644 --- a/drivers/usb/input/itmtouch.c +++ b/drivers/usb/input/itmtouch.c @@ -250,7 +250,6 @@ static void itmtouch_disconnect(struct usb_interface *intf) MODULE_DEVICE_TABLE(usb, itmtouch_ids); static struct usb_driver itmtouch_driver = { - .owner = THIS_MODULE, .name = "itmtouch", .probe = itmtouch_probe, .disconnect = itmtouch_disconnect, diff --git a/drivers/usb/input/kbtab.c b/drivers/usb/input/kbtab.c index fd48e74e78ed..f6d5cead542b 100644 --- a/drivers/usb/input/kbtab.c +++ b/drivers/usb/input/kbtab.c @@ -197,7 +197,6 @@ static void kbtab_disconnect(struct usb_interface *intf) } static struct usb_driver kbtab_driver = { - .owner = THIS_MODULE, .name = "kbtab", .probe = kbtab_probe, .disconnect = kbtab_disconnect, diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c index a32cfe51b77d..5ae5201dbf5a 100644 --- a/drivers/usb/input/keyspan_remote.c +++ b/drivers/usb/input/keyspan_remote.c @@ -559,7 +559,6 @@ static void keyspan_disconnect(struct usb_interface *interface) */ static struct usb_driver keyspan_driver = { - .owner = THIS_MODULE, .name = "keyspan_remote", .probe = keyspan_probe, .disconnect = keyspan_disconnect, diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c index 52cc18cd247d..f018953a5485 100644 --- a/drivers/usb/input/mtouchusb.c +++ b/drivers/usb/input/mtouchusb.c @@ -310,7 +310,6 @@ static void mtouchusb_disconnect(struct usb_interface *intf) MODULE_DEVICE_TABLE(usb, mtouchusb_devices); static struct usb_driver mtouchusb_driver = { - .owner = THIS_MODULE, .name = "mtouchusb", .probe = mtouchusb_probe, .disconnect = mtouchusb_disconnect, diff --git a/drivers/usb/input/powermate.c b/drivers/usb/input/powermate.c index b7476233ef5d..fdf0f788062c 100644 --- a/drivers/usb/input/powermate.c +++ b/drivers/usb/input/powermate.c @@ -441,7 +441,6 @@ static struct usb_device_id powermate_devices [] = { MODULE_DEVICE_TABLE (usb, powermate_devices); static struct usb_driver powermate_driver = { - .owner = THIS_MODULE, .name = "powermate", .probe = powermate_probe, .disconnect = powermate_disconnect, diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c index 7420c6b84284..75e7c12e7189 100644 --- a/drivers/usb/input/touchkitusb.c +++ b/drivers/usb/input/touchkitusb.c @@ -267,7 +267,6 @@ static void touchkit_disconnect(struct usb_interface *intf) MODULE_DEVICE_TABLE(usb, touchkit_devices); static struct usb_driver touchkit_driver = { - .owner = THIS_MODULE, .name = "touchkitusb", .probe = touchkit_probe, .disconnect = touchkit_disconnect, diff --git a/drivers/usb/input/usbkbd.c b/drivers/usb/input/usbkbd.c index 226b6f90a907..2f3edc26cb50 100644 --- a/drivers/usb/input/usbkbd.c +++ b/drivers/usb/input/usbkbd.c @@ -345,7 +345,6 @@ static struct usb_device_id usb_kbd_id_table [] = { MODULE_DEVICE_TABLE (usb, usb_kbd_id_table); static struct usb_driver usb_kbd_driver = { - .owner = THIS_MODULE, .name = "usbkbd", .probe = usb_kbd_probe, .disconnect = usb_kbd_disconnect, diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c index 230f6b1b314a..af526135d210 100644 --- a/drivers/usb/input/usbmouse.c +++ b/drivers/usb/input/usbmouse.c @@ -226,7 +226,6 @@ static struct usb_device_id usb_mouse_id_table [] = { MODULE_DEVICE_TABLE (usb, usb_mouse_id_table); static struct usb_driver usb_mouse_driver = { - .owner = THIS_MODULE, .name = "usbmouse", .probe = usb_mouse_probe, .disconnect = usb_mouse_disconnect, diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c index dc099bbe12bf..48df4cfd5a42 100644 --- a/drivers/usb/input/wacom.c +++ b/drivers/usb/input/wacom.c @@ -945,7 +945,6 @@ static void wacom_disconnect(struct usb_interface *intf) } static struct usb_driver wacom_driver = { - .owner = THIS_MODULE, .name = "wacom", .probe = wacom_probe, .disconnect = wacom_disconnect, diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c index 43112f040b6d..e421328615fb 100644 --- a/drivers/usb/input/xpad.c +++ b/drivers/usb/input/xpad.c @@ -316,7 +316,6 @@ static void xpad_disconnect(struct usb_interface *intf) } static struct usb_driver xpad_driver = { - .owner = THIS_MODULE, .name = "xpad", .probe = xpad_probe, .disconnect = xpad_disconnect, diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c index f526aebea502..1bfc105ad4d6 100644 --- a/drivers/usb/input/yealink.c +++ b/drivers/usb/input/yealink.c @@ -987,7 +987,6 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) } static struct usb_driver yealink_driver = { - .owner = THIS_MODULE, .name = "yealink", .probe = usb_probe, .disconnect = usb_disconnect, diff --git a/drivers/usb/media/dabusb.c b/drivers/usb/media/dabusb.c index 27b23c55bbc7..18d8eaf408d5 100644 --- a/drivers/usb/media/dabusb.c +++ b/drivers/usb/media/dabusb.c @@ -812,7 +812,6 @@ static struct usb_device_id dabusb_ids [] = { MODULE_DEVICE_TABLE (usb, dabusb_ids); static struct usb_driver dabusb_driver = { - .owner = THIS_MODULE, .name = "dabusb", .probe = dabusb_probe, .disconnect = dabusb_disconnect, diff --git a/drivers/usb/media/dsbr100.c b/drivers/usb/media/dsbr100.c index 7503f5b96f59..6a5700e9d428 100644 --- a/drivers/usb/media/dsbr100.c +++ b/drivers/usb/media/dsbr100.c @@ -150,7 +150,6 @@ MODULE_DEVICE_TABLE (usb, usb_dsbr100_device_table); /* USB subsystem interface */ static struct usb_driver usb_dsbr100_driver = { - .owner = THIS_MODULE, .name = "dsbr100", .probe = usb_dsbr100_probe, .disconnect = usb_dsbr100_disconnect, diff --git a/drivers/usb/media/ov511.c b/drivers/usb/media/ov511.c index 036c485d1d1e..8df4f9de5ee5 100644 --- a/drivers/usb/media/ov511.c +++ b/drivers/usb/media/ov511.c @@ -6008,7 +6008,6 @@ ov51x_disconnect(struct usb_interface *intf) } static struct usb_driver ov511_driver = { - .owner = THIS_MODULE, .name = "ov511", .id_table = device_table, .probe = ov51x_probe, diff --git a/drivers/usb/media/pwc/pwc-if.c b/drivers/usb/media/pwc/pwc-if.c index 5524fd70210b..09ca6128ac20 100644 --- a/drivers/usb/media/pwc/pwc-if.c +++ b/drivers/usb/media/pwc/pwc-if.c @@ -111,7 +111,6 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id static void usb_pwc_disconnect(struct usb_interface *intf); static struct usb_driver pwc_driver = { - .owner = THIS_MODULE, .name = "Philips webcam", /* name */ .id_table = pwc_device_table, .probe = usb_pwc_probe, /* probe() */ diff --git a/drivers/usb/media/se401.c b/drivers/usb/media/se401.c index f69e443cd1bc..b2ae29af5940 100644 --- a/drivers/usb/media/se401.c +++ b/drivers/usb/media/se401.c @@ -1401,7 +1401,6 @@ static void se401_disconnect(struct usb_interface *intf) } static struct usb_driver se401_driver = { - .owner = THIS_MODULE, .name = "se401", .id_table = device_table, .probe = se401_probe, diff --git a/drivers/usb/media/sn9c102_core.c b/drivers/usb/media/sn9c102_core.c index b2e66e3b90aa..08723459da86 100644 --- a/drivers/usb/media/sn9c102_core.c +++ b/drivers/usb/media/sn9c102_core.c @@ -2711,7 +2711,6 @@ static void sn9c102_usb_disconnect(struct usb_interface* intf) static struct usb_driver sn9c102_usb_driver = { - .owner = THIS_MODULE, .name = "sn9c102", .id_table = sn9c102_id_table, .probe = sn9c102_usb_probe, diff --git a/drivers/usb/media/stv680.c b/drivers/usb/media/stv680.c index 0fd0fa9fec21..774038b352cd 100644 --- a/drivers/usb/media/stv680.c +++ b/drivers/usb/media/stv680.c @@ -1477,7 +1477,6 @@ static void stv680_disconnect (struct usb_interface *intf) } static struct usb_driver stv680_driver = { - .owner = THIS_MODULE, .name = "stv680", .probe = stv680_probe, .disconnect = stv680_disconnect, diff --git a/drivers/usb/media/vicam.c b/drivers/usb/media/vicam.c index 0bc0b1247a6b..1c73155c8d77 100644 --- a/drivers/usb/media/vicam.c +++ b/drivers/usb/media/vicam.c @@ -1257,7 +1257,6 @@ static struct usb_device_id vicam_table[] = { MODULE_DEVICE_TABLE(usb, vicam_table); static struct usb_driver vicam_driver = { - .owner = THIS_MODULE, .name = "vicam", .probe = vicam_probe, .disconnect = vicam_disconnect, diff --git a/drivers/usb/media/w9968cf.c b/drivers/usb/media/w9968cf.c index 67612c81cb9f..52b90d50febb 100644 --- a/drivers/usb/media/w9968cf.c +++ b/drivers/usb/media/w9968cf.c @@ -3668,7 +3668,6 @@ static void w9968cf_usb_disconnect(struct usb_interface* intf) static struct usb_driver w9968cf_usb_driver = { - .owner = THIS_MODULE, .name = "w9968cf", .id_table = winbond_id_table, .probe = w9968cf_usb_probe, diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c index b293db3c28c3..fad387f21891 100644 --- a/drivers/usb/misc/auerswald.c +++ b/drivers/usb/misc/auerswald.c @@ -2103,7 +2103,6 @@ MODULE_DEVICE_TABLE (usb, auerswald_ids); /* Standard usb driver struct */ static struct usb_driver auerswald_driver = { - .owner = THIS_MODULE, .name = "auerswald", .probe = auerswald_probe, .disconnect = auerswald_disconnect, diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c index b33044d56a1e..6671317b495f 100644 --- a/drivers/usb/misc/cytherm.c +++ b/drivers/usb/misc/cytherm.c @@ -50,7 +50,6 @@ static void cytherm_disconnect(struct usb_interface *interface); /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver cytherm_driver = { - .owner = THIS_MODULE, .name = "cytherm", .probe = cytherm_probe, .disconnect = cytherm_disconnect, diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c index c8155209bf4b..3824df33094e 100644 --- a/drivers/usb/misc/emi26.c +++ b/drivers/usb/misc/emi26.c @@ -227,7 +227,6 @@ static void emi26_disconnect(struct usb_interface *intf) } static struct usb_driver emi26_driver = { - .owner = THIS_MODULE, .name = "emi26 - firmware loader", .probe = emi26_probe, .disconnect = emi26_disconnect, diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index 189986af2ac7..52fea2e08db8 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -266,7 +266,6 @@ static void emi62_disconnect(struct usb_interface *intf) } static struct usb_driver emi62_driver = { - .owner = THIS_MODULE, .name = "emi62 - firmware loader", .probe = emi62_probe, .disconnect = emi62_disconnect, diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index 1dc3e0f73014..d8cde1017985 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -114,7 +114,6 @@ static struct usb_class_driver idmouse_class = { /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver idmouse_driver = { - .owner = THIS_MODULE, .name = DRIVER_SHORT, .probe = idmouse_probe, .disconnect = idmouse_disconnect, diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 7e93ac96490f..981d8a5fbfd9 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -763,7 +763,6 @@ static void ld_usb_disconnect(struct usb_interface *intf) /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver ld_usb_driver = { - .owner = THIS_MODULE, .name = "ldusb", .probe = ld_usb_probe, .disconnect = ld_usb_disconnect, diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 2703e205bc8f..1336745b8f55 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -282,7 +282,6 @@ static struct usb_class_driver tower_class = { /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver tower_driver = { - .owner = THIS_MODULE, .name = "legousbtower", .probe = tower_probe, .disconnect = tower_disconnect, diff --git a/drivers/usb/misc/phidgetkit.c b/drivers/usb/misc/phidgetkit.c index 067a81486921..605a3c87e05c 100644 --- a/drivers/usb/misc/phidgetkit.c +++ b/drivers/usb/misc/phidgetkit.c @@ -555,7 +555,6 @@ static void interfacekit_disconnect(struct usb_interface *interface) } static struct usb_driver interfacekit_driver = { - .owner = THIS_MODULE, .name = "phidgetkit", .probe = interfacekit_probe, .disconnect = interfacekit_disconnect, diff --git a/drivers/usb/misc/phidgetservo.c b/drivers/usb/misc/phidgetservo.c index a30d4a6ee824..b3418d2bcc69 100644 --- a/drivers/usb/misc/phidgetservo.c +++ b/drivers/usb/misc/phidgetservo.c @@ -306,7 +306,6 @@ servo_disconnect(struct usb_interface *interface) } static struct usb_driver servo_driver = { - .owner = THIS_MODULE, .name = "phidgetservo", .probe = servo_probe, .disconnect = servo_disconnect, diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index 9590dbac5d9a..b9d66074b80c 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -522,7 +522,6 @@ static struct usb_device_id rio_table [] = { MODULE_DEVICE_TABLE (usb, rio_table); static struct usb_driver rio_driver = { - .owner = THIS_MODULE, .name = "rio500", .probe = probe_rio, .disconnect = disconnect_rio, diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 41ef2b606751..44350d49ad0a 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3489,7 +3489,6 @@ static struct usb_device_id sisusb_table [] = { MODULE_DEVICE_TABLE (usb, sisusb_table); static struct usb_driver sisusb_driver = { - .owner = THIS_MODULE, .name = "sisusb", .probe = sisusb_probe, .disconnect = sisusb_disconnect, diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 85f3725334b0..cc3dae3f34e0 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -371,7 +371,6 @@ static void lcd_disconnect(struct usb_interface *interface) } static struct usb_driver lcd_driver = { - .owner = THIS_MODULE, .name = "usblcd", .probe = lcd_probe, .disconnect = lcd_disconnect, diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c index 3c93921cb6b3..877b081a3a6e 100644 --- a/drivers/usb/misc/usbled.c +++ b/drivers/usb/misc/usbled.c @@ -148,7 +148,6 @@ static void led_disconnect(struct usb_interface *interface) } static struct usb_driver led_driver = { - .owner = THIS_MODULE, .name = "usbled", .probe = led_probe, .disconnect = led_disconnect, diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 605a2afe34ed..84fa1728f052 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -2134,7 +2134,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver usbtest_driver = { - .owner = THIS_MODULE, .name = "usbtest", .id_table = id_table, .probe = usbtest_probe, diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 1cabe7ed91f5..4081990b7d1a 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -780,7 +780,6 @@ MODULE_DEVICE_TABLE (usb, uss720_table); static struct usb_driver uss720_driver = { - .owner = THIS_MODULE, .name = "uss720", .probe = uss720_probe, .disconnect = uss720_disconnect, diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c index 542120ef1fd2..2faf2f2bdcdd 100644 --- a/drivers/usb/net/asix.c +++ b/drivers/usb/net/asix.c @@ -918,7 +918,6 @@ static const struct usb_device_id products [] = { MODULE_DEVICE_TABLE(usb, products); static struct usb_driver asix_driver = { - .owner = THIS_MODULE, .name = "asix", .id_table = products, .probe = usbnet_probe, diff --git a/drivers/usb/net/catc.c b/drivers/usb/net/catc.c index 37ef365a2472..be5f5e142dd0 100644 --- a/drivers/usb/net/catc.c +++ b/drivers/usb/net/catc.c @@ -934,7 +934,6 @@ static struct usb_device_id catc_id_table [] = { MODULE_DEVICE_TABLE(usb, catc_id_table); static struct usb_driver catc_driver = { - .owner = THIS_MODULE, .name = driver_name, .probe = catc_probe, .disconnect = catc_disconnect, diff --git a/drivers/usb/net/cdc_ether.c b/drivers/usb/net/cdc_ether.c index c008c981862b..63f1f3ba8e0b 100644 --- a/drivers/usb/net/cdc_ether.c +++ b/drivers/usb/net/cdc_ether.c @@ -476,7 +476,6 @@ static const struct usb_device_id products [] = { MODULE_DEVICE_TABLE(usb, products); static struct usb_driver cdc_driver = { - .owner = THIS_MODULE, .name = "cdc_ether", .id_table = products, .probe = usbnet_probe, diff --git a/drivers/usb/net/cdc_subset.c b/drivers/usb/net/cdc_subset.c index f05cfb83c82d..ec801e8bb1bb 100644 --- a/drivers/usb/net/cdc_subset.c +++ b/drivers/usb/net/cdc_subset.c @@ -306,7 +306,6 @@ MODULE_DEVICE_TABLE(usb, products); /*-------------------------------------------------------------------------*/ static struct usb_driver cdc_subset_driver = { - .owner = THIS_MODULE, .name = "cdc_subset", .probe = usbnet_probe, .suspend = usbnet_suspend, diff --git a/drivers/usb/net/gl620a.c b/drivers/usb/net/gl620a.c index 2455e9a85674..faf1e86be687 100644 --- a/drivers/usb/net/gl620a.c +++ b/drivers/usb/net/gl620a.c @@ -377,7 +377,6 @@ static const struct usb_device_id products [] = { MODULE_DEVICE_TABLE(usb, products); static struct usb_driver gl620a_driver = { - .owner = THIS_MODULE, .name = "gl620a", .id_table = products, .probe = usbnet_probe, diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c index b5776518020f..def3bb8e2290 100644 --- a/drivers/usb/net/kaweth.c +++ b/drivers/usb/net/kaweth.c @@ -175,7 +175,6 @@ MODULE_DEVICE_TABLE (usb, usb_klsi_table); * kaweth_driver ****************************************************************/ static struct usb_driver kaweth_driver = { - .owner = THIS_MODULE, .name = driver_name, .probe = kaweth_probe, .disconnect = kaweth_disconnect, diff --git a/drivers/usb/net/net1080.c b/drivers/usb/net/net1080.c index b3799b1a2b0d..78e6a43b1087 100644 --- a/drivers/usb/net/net1080.c +++ b/drivers/usb/net/net1080.c @@ -593,7 +593,6 @@ static const struct usb_device_id products [] = { MODULE_DEVICE_TABLE(usb, products); static struct usb_driver net1080_driver = { - .owner = THIS_MODULE, .name = "net1080", .id_table = products, .probe = usbnet_probe, diff --git a/drivers/usb/net/plusb.c b/drivers/usb/net/plusb.c index 89856aa0e3b8..4fe863389cb7 100644 --- a/drivers/usb/net/plusb.c +++ b/drivers/usb/net/plusb.c @@ -127,7 +127,6 @@ static const struct usb_device_id products [] = { MODULE_DEVICE_TABLE(usb, products); static struct usb_driver plusb_driver = { - .owner = THIS_MODULE, .name = "plusb", .id_table = products, .probe = usbnet_probe, diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c index c0ecbab6f6ba..49991ac1bf3b 100644 --- a/drivers/usb/net/rndis_host.c +++ b/drivers/usb/net/rndis_host.c @@ -586,7 +586,6 @@ static const struct usb_device_id products [] = { MODULE_DEVICE_TABLE(usb, products); static struct usb_driver rndis_driver = { - .owner = THIS_MODULE, .name = "rndis_host", .id_table = products, .probe = usbnet_probe, diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c index 787dd3591d6a..8ca52be23976 100644 --- a/drivers/usb/net/rtl8150.c +++ b/drivers/usb/net/rtl8150.c @@ -177,7 +177,6 @@ static int rtl8150_probe(struct usb_interface *intf, static const char driver_name [] = "rtl8150"; static struct usb_driver rtl8150_driver = { - .owner = THIS_MODULE, .name = driver_name, .probe = rtl8150_probe, .disconnect = rtl8150_disconnect, diff --git a/drivers/usb/net/zaurus.c b/drivers/usb/net/zaurus.c index 680d13957af4..9c5ab251370c 100644 --- a/drivers/usb/net/zaurus.c +++ b/drivers/usb/net/zaurus.c @@ -357,7 +357,6 @@ static const struct usb_device_id products [] = { MODULE_DEVICE_TABLE(usb, products); static struct usb_driver zaurus_driver = { - .owner = THIS_MODULE, .name = "zaurus", .id_table = products, .probe = usbnet_probe, diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c index 2f52261c7cc1..4d6673adc8fc 100644 --- a/drivers/usb/net/zd1201.c +++ b/drivers/usb/net/zd1201.c @@ -1923,7 +1923,6 @@ static int zd1201_resume(struct usb_interface *interface) #endif static struct usb_driver zd1201_usb = { - .owner = THIS_MODULE, .name = "zd1201", .probe = zd1201_probe, .disconnect = zd1201_disconnect, diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 2ef9945a6c07..dbf1f063098c 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -23,7 +23,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver airprime_driver = { - .owner = THIS_MODULE, .name = "airprime", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/anydata.c b/drivers/usb/serial/anydata.c index 7a171e034b59..343f6f228220 100644 --- a/drivers/usb/serial/anydata.c +++ b/drivers/usb/serial/anydata.c @@ -27,7 +27,6 @@ static int buffer_size; static int debug; static struct usb_driver anydata_driver = { - .owner = THIS_MODULE, .name = "anydata", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 69039bd9fc5e..4144777ea18b 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -113,7 +113,6 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_driver belkin_driver = { - .owner = THIS_MODULE, .name = "belkin", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 813bab37e076..da46b351e188 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -67,7 +67,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver cp2101_driver = { - .owner = THIS_MODULE, .name = "cp2101", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 8c10e4004905..6d18d4eaba35 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -76,7 +76,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver cyberjack_driver = { - .owner = THIS_MODULE, .name = "cyberjack", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index c50cec95f49b..8fc414bd5b24 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -493,7 +493,6 @@ static struct usb_device_id id_table_4 [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_driver digi_driver = { - .owner = THIS_MODULE, .name = "digi_acceleport", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index e5e40064caf2..79a766e9ca23 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -105,7 +105,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver empeg_driver = { - .owner = THIS_MODULE, .name = "empeg", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 198a322286f9..452efce72714 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -222,7 +222,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver garmin_driver = { - .owner = THIS_MODULE, .name = "garmin_gps", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index c00a440dc421..4ddac620fc0c 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -68,7 +68,6 @@ static int generic_probe(struct usb_interface *interface, } static struct usb_driver generic_driver = { - .owner = THIS_MODULE, .name = "usbserial_generic", .probe = generic_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index e588c3fe632d..e9719da2aca1 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -37,7 +37,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver hp49gp_driver = { - .owner = THIS_MODULE, .name = "hp4X", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 276bd425a474..4e2b599d85a6 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -242,7 +242,6 @@ static void edge_shutdown (struct usb_serial *serial); #include "io_tables.h" /* all of the devices that this driver supports */ static struct usb_driver io_driver = { - .owner = THIS_MODULE, .name = "io_edgeport", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 8b2e4c78abcd..22ad1a5a8f9e 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -216,7 +216,6 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_driver io_driver = { - .owner = THIS_MODULE, .name = "io_ti", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index efb568be7015..06d07cea0b70 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -542,7 +542,6 @@ static struct usb_device_id ipaq_id_table [] = { MODULE_DEVICE_TABLE (usb, ipaq_id_table); static struct usb_driver ipaq_driver = { - .owner = THIS_MODULE, .name = "ipaq", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 64e2cda2a84a..2dd191f5fe76 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -152,7 +152,6 @@ static struct usb_device_id usb_ipw_ids[] = { MODULE_DEVICE_TABLE(usb, usb_ipw_ids); static struct usb_driver usb_ipw_driver = { - .owner = THIS_MODULE, .name = "ipwtty", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 647431c1ccb1..a59010421444 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -125,7 +125,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver ir_driver = { - .owner = THIS_MODULE, .name = "ir-usb", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 4e6f626f6062..7472ed6bf626 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -520,7 +520,6 @@ static struct usb_device_id keyspan_ids_combined[] = { MODULE_DEVICE_TABLE(usb, keyspan_ids_combined); static struct usb_driver keyspan_driver = { - .owner = THIS_MODULE, .name = "keyspan", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 0d1f15268549..b0441c35f98f 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -150,7 +150,6 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_driver keyspan_pda_driver = { - .owner = THIS_MODULE, .name = "keyspan_pda", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index bd68638b7c35..4e2f7dfb58b2 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -116,7 +116,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver kl5kusb105d_driver = { - .owner = THIS_MODULE, .name = "kl5kusb105d", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 4c853afea385..d9c21e275130 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -97,7 +97,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver kobil_driver = { - .owner = THIS_MODULE, .name = "kobil", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index b0415e7542c4..b6d6cab9c859 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -125,7 +125,6 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_driver mct_u232_driver = { - .owner = THIS_MODULE, .name = "mct_u232", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index b595befb24cf..762d8ff9a1e4 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -80,7 +80,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver omninet_driver = { - .owner = THIS_MODULE, .name = "omninet", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 4ee657eaaa0b..3fd2405304fd 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -95,7 +95,6 @@ static struct usb_device_id option_ids[] = { MODULE_DEVICE_TABLE(usb, option_ids); static struct usb_driver option_driver = { - .owner = THIS_MODULE, .name = "option", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index e302a320444c..c96ba9fc19e0 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -82,7 +82,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver pl2303_driver = { - .owner = THIS_MODULE, .name = "pl2303", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index f8241c152043..3ea284ce7b8b 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -160,7 +160,6 @@ static struct usb_device_id id_table[] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver safe_driver = { - .owner = THIS_MODULE, .name = "safe_serial", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 17a1f09483bd..9e53ec75bcfd 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -248,7 +248,6 @@ static struct usb_device_id ti_id_table_combined[] = { }; static struct usb_driver ti_usb_driver = { - .owner = THIS_MODULE, .name = "ti_usb_3410_5052", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 2ac37b52485a..12aaf18ff9ea 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -42,7 +42,6 @@ /* Driver structure we register with the USB core */ static struct usb_driver usb_serial_driver = { - .owner = THIS_MODULE, .name = "usbserial", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 2973f5564c06..49b1fbe61f25 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -173,7 +173,6 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_driver visor_driver = { - .owner = THIS_MODULE, .name = "visor", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 19c6386bb692..a7c3c4734d83 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -127,7 +127,6 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_driver whiteheat_driver = { - .owner = THIS_MODULE, .name = "whiteheat", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c index 2680c69a2417..b28151d1b609 100644 --- a/drivers/usb/storage/libusual.c +++ b/drivers/usb/storage/libusual.c @@ -153,7 +153,6 @@ static void usu_disconnect(struct usb_interface *intf) } static struct usb_driver usu_driver = { - .owner = THIS_MODULE, .name = "libusual", .probe = usu_probe, .disconnect = usu_disconnect, diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index c8375aa62723..484ed297bed0 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -1000,7 +1000,6 @@ static void storage_disconnect(struct usb_interface *intf) ***********************************************************************/ static struct usb_driver usb_storage_driver = { - .owner = THIS_MODULE, .name = "usb-storage", .probe = storage_probe, .disconnect = storage_disconnect, diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index 6c3a53f8f26c..60c458ebaa2d 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -330,7 +330,6 @@ static void skel_disconnect(struct usb_interface *interface) } static struct usb_driver skel_driver = { - .owner = THIS_MODULE, .name = "skeleton", .probe = skel_probe, .disconnect = skel_disconnect, diff --git a/drivers/w1/dscore.c b/drivers/w1/dscore.c index 15fb250451e5..b9146306df49 100644 --- a/drivers/w1/dscore.c +++ b/drivers/w1/dscore.c @@ -52,7 +52,6 @@ static int ds_send_control_cmd(struct ds_device *, u16, u16); static struct usb_driver ds_driver = { - .owner = THIS_MODULE, .name = "DS9490R", .probe = ds_probe, .disconnect = ds_disconnect, diff --git a/include/linux/usb.h b/include/linux/usb.h index 3d05c63451a8..2714814ab66c 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -536,8 +536,6 @@ struct usb_dynids { /** * struct usb_driver - identifies USB driver to usbcore - * @owner: Pointer to the module owner of this driver; initialize - * it using THIS_MODULE. * @name: The driver name should be unique among USB drivers, * and should normally be the same as the module name. * @probe: Called to see if the driver is willing to manage a particular @@ -580,8 +578,6 @@ struct usb_dynids { * them as necessary, and blocking until the unlinks complete). */ struct usb_driver { - struct module *owner; - const char *name; int (*probe) (struct usb_interface *intf, diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 99dae024b640..22f8bb612bff 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -1996,7 +1996,6 @@ static struct usb_device_id usb_audio_ids [] = { MODULE_DEVICE_TABLE (usb, usb_audio_ids); static struct usb_driver usb_audio_driver = { - .owner = THIS_MODULE, .name = "snd-usb-audio", .probe = usb_audio_probe, .disconnect = usb_audio_disconnect, diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c index cf77313c609d..a3967f72ab4e 100644 --- a/sound/usb/usx2y/usbusx2y.c +++ b/sound/usb/usx2y/usbusx2y.c @@ -409,7 +409,6 @@ static void snd_usX2Y_disconnect(struct usb_interface *intf) MODULE_DEVICE_TABLE(usb, snd_usX2Y_usb_id_table); static struct usb_driver snd_usX2Y_usb_driver = { - .owner = THIS_MODULE, .name = "snd-usb-usx2y", .probe = snd_usX2Y_probe, .disconnect = snd_usX2Y_disconnect, -- cgit v1.2.3 From 9ad3d6ccf5eee285e233dbaf186369b8d477a666 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 17 Nov 2005 17:10:32 -0500 Subject: [PATCH] USB: Remove USB private semaphore This patch (as605) removes the private udev->serialize semaphore, relying instead on the locking provided by the embedded struct device's semaphore. The changes are confined to the core, except that the usb_trylock_device routine now uses the return convention of down_trylock rather than down_read_trylock (they return opposite values for no good reason). A couple of other associated changes are included as well: Now that we aren't concerned about HCDs that avoid using the hcd glue layer, usb_disconnect no longer needs to acquire the usb_bus_lock -- that can be done by usb_remove_hcd where it belongs. Devices aren't locked over the same scope of code in usb_new_device and hub_port_connect_change as they used to be. This shouldn't cause any trouble. Along with the preceding driver core patch, this needs a lot of testing. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devices.c | 4 +- drivers/usb/core/devio.c | 2 - drivers/usb/core/driver.c | 4 -- drivers/usb/core/hcd.c | 5 +- drivers/usb/core/hub.c | 48 +++++++------------ drivers/usb/core/usb.c | 114 ++++---------------------------------------- drivers/usb/core/usb.h | 3 -- drivers/usb/host/ohci-hub.c | 2 +- include/linux/usb.h | 9 ++-- 9 files changed, 37 insertions(+), 154 deletions(-) diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 83e815d3cd52..55bc563a3256 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -545,10 +545,10 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes, loff_t *ski struct usb_device *childdev = usbdev->children[chix]; if (childdev) { - down(&childdev->serialize); + usb_lock_device(childdev); ret = usb_device_dump(buffer, nbytes, skip_bytes, file_offset, childdev, bus, level + 1, chix, ++cnt); - up(&childdev->serialize); + usb_unlock_device(childdev); if (ret == -EFAULT) return total_written; total_written += ret; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 3a73170e95dd..2b68998fe4b3 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1349,9 +1349,7 @@ static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl) /* let kernel drivers try to (re)bind to the interface */ case USBDEVFS_CONNECT: usb_unlock_device(ps->dev); - usb_lock_all_devices(); bus_rescan_devices(intf->dev.bus); - usb_unlock_all_devices(); usb_lock_device(ps->dev); break; diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index bb139f06bcd6..076462c8ba2a 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -432,9 +432,7 @@ int usb_register_driver(struct usb_driver *new_driver, struct module *owner) spin_lock_init(&new_driver->dynids.lock); INIT_LIST_HEAD(&new_driver->dynids.list); - usb_lock_all_devices(); retval = driver_register(&new_driver->driver); - usb_unlock_all_devices(); if (!retval) { pr_info("%s: registered new driver %s\n", @@ -465,11 +463,9 @@ void usb_deregister(struct usb_driver *driver) { pr_info("%s: deregistering driver %s\n", usbcore_name, driver->name); - usb_lock_all_devices(); usb_remove_newid_file(driver); usb_free_dynids(driver); driver_unregister(&driver->driver); - usb_unlock_all_devices(); usbfs_update_special(); } diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index da24c31ee00d..d16a0e8a7d72 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -857,9 +857,7 @@ static int register_root_hub (struct usb_device *usb_dev, return (retval < 0) ? retval : -EMSGSIZE; } - usb_lock_device (usb_dev); retval = usb_new_device (usb_dev); - usb_unlock_device (usb_dev); if (retval) { usb_dev->bus->root_hub = NULL; dev_err (parent_dev, "can't register root hub for %s, %d\n", @@ -1891,7 +1889,10 @@ void usb_remove_hcd(struct usb_hcd *hcd) spin_lock_irq (&hcd_root_hub_lock); hcd->rh_registered = 0; spin_unlock_irq (&hcd_root_hub_lock); + + down(&usb_bus_list_lock); usb_disconnect(&hcd->self.root_hub); + up(&usb_bus_list_lock); hcd->poll_rh = 0; del_timer_sync(&hcd->rh_timer); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 40c6c50c6bd9..dd3bcfb2bcb6 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -32,7 +32,7 @@ #include "hub.h" /* Protect struct usb_device->state and ->children members - * Note: Both are also protected by ->serialize, except that ->state can + * Note: Both are also protected by ->dev.sem, except that ->state can * change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */ static DEFINE_SPINLOCK(device_state_lock); @@ -975,8 +975,8 @@ static int locktree(struct usb_device *udev) /* when everyone grabs locks top->bottom, * non-overlapping work may be concurrent */ - down(&udev->serialize); - up(&hdev->serialize); + usb_lock_device(udev); + usb_unlock_device(hdev); return t + 1; } } @@ -1132,16 +1132,10 @@ void usb_disconnect(struct usb_device **pdev) * this quiesces everyting except pending urbs. */ usb_set_device_state(udev, USB_STATE_NOTATTACHED); - - /* lock the bus list on behalf of HCDs unregistering their root hubs */ - if (!udev->parent) { - down(&usb_bus_list_lock); - usb_lock_device(udev); - } else - down(&udev->serialize); - dev_info (&udev->dev, "USB disconnect, address %d\n", udev->devnum); + usb_lock_device(udev); + /* Free up all the children before we remove this device */ for (i = 0; i < USB_MAXCHILDREN; i++) { if (udev->children[i]) @@ -1169,11 +1163,7 @@ void usb_disconnect(struct usb_device **pdev) *pdev = NULL; spin_unlock_irq(&device_state_lock); - if (!udev->parent) { - usb_unlock_device(udev); - up(&usb_bus_list_lock); - } else - up(&udev->serialize); + usb_unlock_device(udev); device_unregister(&udev->dev); } @@ -1243,8 +1233,8 @@ static inline void show_string(struct usb_device *udev, char *id, char *string) * * This is called with devices which have been enumerated, but not yet * configured. The device descriptor is available, but not descriptors - * for any device configuration. The caller must have locked udev and - * either the parent hub (if udev is a normal device) or else the + * for any device configuration. The caller must have locked either + * the parent hub (if udev is a normal device) or else the * usb_bus_list_lock (if udev is a root hub). The parent's pointer to * udev has already been installed, but udev is not yet visible through * sysfs or other filesystem code. @@ -1254,8 +1244,7 @@ static inline void show_string(struct usb_device *udev, char *id, char *string) * * This call is synchronous, and may not be used in an interrupt context. * - * Only the hub driver should ever call this; root hub registration - * uses it indirectly. + * Only the hub driver or root-hub registrar should ever call this. */ int usb_new_device(struct usb_device *udev) { @@ -1364,6 +1353,8 @@ int usb_new_device(struct usb_device *udev) } usb_create_sysfs_dev_files (udev); + usb_lock_device(udev); + /* choose and set the configuration. that registers the interfaces * with the driver core, and lets usb device drivers bind to them. */ @@ -1385,6 +1376,8 @@ int usb_new_device(struct usb_device *udev) /* USB device state == configured ... usable */ usb_notify_add_device(udev); + usb_unlock_device(udev); + return 0; fail: @@ -1872,11 +1865,8 @@ int usb_resume_device(struct usb_device *udev) usb_unlock_device(udev); /* rebind drivers that had no suspend() */ - if (status == 0) { - usb_lock_all_devices(); + if (status == 0) bus_rescan_devices(&usb_bus_type); - usb_unlock_all_devices(); - } return status; } @@ -1889,14 +1879,14 @@ static int remote_wakeup(struct usb_device *udev) /* don't repeat RESUME sequence if this device * was already woken up by some other task */ - down(&udev->serialize); + usb_lock_device(udev); if (udev->state == USB_STATE_SUSPENDED) { dev_dbg(&udev->dev, "RESUME (wakeup)\n"); /* TRSMRCY = 10 msec */ msleep(10); status = finish_device_resume(udev); } - up(&udev->serialize); + usb_unlock_device(udev); #endif return status; } @@ -1997,7 +1987,7 @@ static int hub_resume(struct usb_interface *intf) if (!udev || status < 0) continue; - down (&udev->serialize); + usb_lock_device(udev); if (portstat & USB_PORT_STAT_SUSPEND) status = hub_port_resume(hub, port1, udev); else { @@ -2008,7 +1998,7 @@ static int hub_resume(struct usb_interface *intf) hub_port_logical_disconnect(hub, port1); } } - up(&udev->serialize); + usb_unlock_device(udev); } } #endif @@ -2573,7 +2563,6 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, * udev becomes globally accessible, although presumably * no one will look at it until hdev is unlocked. */ - down (&udev->serialize); status = 0; /* We mustn't add new devices if the parent hub has @@ -2597,7 +2586,6 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, } } - up (&udev->serialize); if (status) goto loop_disable; diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 294e9f127477..fcfda21be499 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include @@ -49,8 +48,6 @@ const char *usbcore_name = "usbcore"; static int nousb; /* Disable USB when built into kernel image */ /* Not honored on modular build */ -static DECLARE_RWSEM(usb_all_devices_rwsem); - /** * usb_ifnum_to_if - get the interface object with a given interface number @@ -446,8 +443,6 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1) dev->parent = parent; INIT_LIST_HEAD(&dev->filelist); - init_MUTEX(&dev->serialize); - return dev; } @@ -520,75 +515,20 @@ void usb_put_intf(struct usb_interface *intf) /* USB device locking * - * Although locking USB devices should be straightforward, it is - * complicated by the way the driver-model core works. When a new USB - * driver is registered or unregistered, the core will automatically - * probe or disconnect all matching interfaces on all USB devices while - * holding the USB subsystem writelock. There's no good way for us to - * tell which devices will be used or to lock them beforehand; our only - * option is to effectively lock all the USB devices. - * - * We do that by using a private rw-semaphore, usb_all_devices_rwsem. - * When locking an individual device you must first acquire the rwsem's - * readlock. When a driver is registered or unregistered the writelock - * must be held. These actions are encapsulated in the subroutines - * below, so all a driver needs to do is call usb_lock_device() and - * usb_unlock_device(). + * USB devices and interfaces are locked using the semaphore in their + * embedded struct device. The hub driver guarantees that whenever a + * device is connected or disconnected, drivers are called with the + * USB device locked as well as their particular interface. * * Complications arise when several devices are to be locked at the same * time. Only hub-aware drivers that are part of usbcore ever have to - * do this; nobody else needs to worry about it. The problem is that - * usb_lock_device() must not be called to lock a second device since it - * would acquire the rwsem's readlock reentrantly, leading to deadlock if - * another thread was waiting for the writelock. The solution is simple: - * - * When locking more than one device, call usb_lock_device() - * to lock the first one. Lock the others by calling - * down(&udev->serialize) directly. - * - * When unlocking multiple devices, use up(&udev->serialize) - * to unlock all but the last one. Unlock the last one by - * calling usb_unlock_device(). + * do this; nobody else needs to worry about it. The rule for locking + * is simple: * * When locking both a device and its parent, always lock the * the parent first. */ -/** - * usb_lock_device - acquire the lock for a usb device structure - * @udev: device that's being locked - * - * Use this routine when you don't hold any other device locks; - * to acquire nested inner locks call down(&udev->serialize) directly. - * This is necessary for proper interaction with usb_lock_all_devices(). - */ -void usb_lock_device(struct usb_device *udev) -{ - down_read(&usb_all_devices_rwsem); - down(&udev->serialize); -} - -/** - * usb_trylock_device - attempt to acquire the lock for a usb device structure - * @udev: device that's being locked - * - * Don't use this routine if you already hold a device lock; - * use down_trylock(&udev->serialize) instead. - * This is necessary for proper interaction with usb_lock_all_devices(). - * - * Returns 1 if successful, 0 if contention. - */ -int usb_trylock_device(struct usb_device *udev) -{ - if (!down_read_trylock(&usb_all_devices_rwsem)) - return 0; - if (down_trylock(&udev->serialize)) { - up_read(&usb_all_devices_rwsem); - return 0; - } - return 1; -} - /** * usb_lock_device_for_reset - cautiously acquire the lock for a * usb device structure @@ -627,7 +567,7 @@ int usb_lock_device_for_reset(struct usb_device *udev, } } - while (!usb_trylock_device(udev)) { + while (usb_trylock_device(udev) != 0) { /* If we can't acquire the lock after waiting one second, * we're probably deadlocked */ @@ -645,39 +585,6 @@ int usb_lock_device_for_reset(struct usb_device *udev, return 1; } -/** - * usb_unlock_device - release the lock for a usb device structure - * @udev: device that's being unlocked - * - * Use this routine when releasing the only device lock you hold; - * to release inner nested locks call up(&udev->serialize) directly. - * This is necessary for proper interaction with usb_lock_all_devices(). - */ -void usb_unlock_device(struct usb_device *udev) -{ - up(&udev->serialize); - up_read(&usb_all_devices_rwsem); -} - -/** - * usb_lock_all_devices - acquire the lock for all usb device structures - * - * This is necessary when registering a new driver or probing a bus, - * since the driver-model core may try to use any usb_device. - */ -void usb_lock_all_devices(void) -{ - down_write(&usb_all_devices_rwsem); -} - -/** - * usb_unlock_all_devices - release the lock for all usb device structures - */ -void usb_unlock_all_devices(void) -{ - up_write(&usb_all_devices_rwsem); -} - static struct usb_device *match_device(struct usb_device *dev, u16 vendor_id, u16 product_id) @@ -700,10 +607,10 @@ static struct usb_device *match_device(struct usb_device *dev, /* look through all of the children of this device */ for (child = 0; child < dev->maxchild; ++child) { if (dev->children[child]) { - down(&dev->children[child]->serialize); + usb_lock_device(dev->children[child]); ret_dev = match_device(dev->children[child], vendor_id, product_id); - up(&dev->children[child]->serialize); + usb_unlock_device(dev->children[child]); if (ret_dev) goto exit; } @@ -1300,10 +1207,7 @@ EXPORT_SYMBOL(usb_put_dev); EXPORT_SYMBOL(usb_get_dev); EXPORT_SYMBOL(usb_hub_tt_clear_buffer); -EXPORT_SYMBOL(usb_lock_device); -EXPORT_SYMBOL(usb_trylock_device); EXPORT_SYMBOL(usb_lock_device_for_reset); -EXPORT_SYMBOL(usb_unlock_device); EXPORT_SYMBOL(usb_driver_claim_interface); EXPORT_SYMBOL(usb_driver_release_interface); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 98e85fb4d3b7..4647e1ebc68d 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -16,9 +16,6 @@ extern int usb_get_device_descriptor(struct usb_device *dev, extern char *usb_cache_string(struct usb_device *udev, int index); extern int usb_set_configuration(struct usb_device *dev, int configuration); -extern void usb_lock_all_devices(void); -extern void usb_unlock_all_devices(void); - extern void usb_kick_khubd(struct usb_device *dev); extern void usb_suspend_root_hub(struct usb_device *hdev); extern void usb_resume_root_hub(struct usb_device *dev); diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 72e3b12a1926..4b2226d77b34 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -372,7 +372,7 @@ done: & ohci->hc_control) == OHCI_USB_OPER && time_after (jiffies, ohci->next_statechange) - && usb_trylock_device (hcd->self.root_hub) + && usb_trylock_device (hcd->self.root_hub) == 0 ) { ohci_vdbg (ohci, "autosuspend\n"); (void) ohci_bus_suspend (hcd); diff --git a/include/linux/usb.h b/include/linux/usb.h index 2714814ab66c..46dc0421d19e 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -329,8 +329,6 @@ struct usb_device { struct usb_tt *tt; /* low/full speed dev, highspeed hub */ int ttport; /* device port on that tt hub */ - struct semaphore serialize; - unsigned int toggle[2]; /* one bit for each endpoint * ([0] = IN, [1] = OUT) */ @@ -377,11 +375,12 @@ struct usb_device { extern struct usb_device *usb_get_dev(struct usb_device *dev); extern void usb_put_dev(struct usb_device *dev); -extern void usb_lock_device(struct usb_device *udev); -extern int usb_trylock_device(struct usb_device *udev); +/* USB device locking */ +#define usb_lock_device(udev) down(&(udev)->dev.sem) +#define usb_unlock_device(udev) up(&(udev)->dev.sem) +#define usb_trylock_device(udev) down_trylock(&(udev)->dev.sem) extern int usb_lock_device_for_reset(struct usb_device *udev, struct usb_interface *iface); -extern void usb_unlock_device(struct usb_device *udev); /* USB port reset for device reinitialization */ extern int usb_reset_device(struct usb_device *dev); -- cgit v1.2.3 From 7d069b7d80933004282c48edbe62526e4cb0aecc Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 18 Nov 2005 12:06:34 -0500 Subject: [PATCH] USB: Disconnect children during hub unbind This patch (as606b) is an updated version of my earlier patch to disconnect children from a hub device when the hub driver is unbound. Thanks to the changes in the driver core locking, we now know that the entire hub device (and not just the interface) is locked whenever the hub driver's disconnect method runs. Hence it is safe to disconnect the child device structures immediately instead of deferring the job. The earlier version of the patch neglected to disable the hub's ports. We don't want to forget that; otherwise we'd end up with live devices using addresses that have been recycled. This update adds the necessary code. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 94 +++++++++++++++++--------------------------------- 1 file changed, 31 insertions(+), 63 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index dd3bcfb2bcb6..02601f412f9d 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -515,6 +515,31 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) return ret; } + +/* caller has locked the hub device */ +static void hub_pre_reset(struct usb_hub *hub, int disable_ports) +{ + struct usb_device *hdev = hub->hdev; + int port1; + + for (port1 = 1; port1 <= hdev->maxchild; ++port1) { + if (hdev->children[port1 - 1]) { + usb_disconnect(&hdev->children[port1 - 1]); + if (disable_ports) + hub_port_disable(hub, port1, 0); + } + } + hub_quiesce(hub); +} + +/* caller has locked the hub device */ +static void hub_post_reset(struct usb_hub *hub) +{ + hub_activate(hub); + hub_power_on(hub); +} + + static int hub_configure(struct usb_hub *hub, struct usb_endpoint_descriptor *endpoint) { @@ -750,29 +775,10 @@ fail: static unsigned highspeed_hubs; -/* Called after the hub driver is unbound from a hub with children */ -static void hub_remove_children_work(void *__hub) -{ - struct usb_hub *hub = __hub; - struct usb_device *hdev = hub->hdev; - int i; - - kfree(hub); - - usb_lock_device(hdev); - for (i = 0; i < hdev->maxchild; ++i) { - if (hdev->children[i]) - usb_disconnect(&hdev->children[i]); - } - usb_unlock_device(hdev); - usb_put_dev(hdev); -} - static void hub_disconnect(struct usb_interface *intf) { struct usb_hub *hub = usb_get_intfdata (intf); struct usb_device *hdev; - int n, port1; usb_set_intfdata (intf, NULL); hdev = hub->hdev; @@ -780,7 +786,9 @@ static void hub_disconnect(struct usb_interface *intf) if (hdev->speed == USB_SPEED_HIGH) highspeed_hubs--; - hub_quiesce(hub); + /* Disconnect all children and quiesce the hub */ + hub_pre_reset(hub, 1); + usb_free_urb(hub->urb); hub->urb = NULL; @@ -800,27 +808,7 @@ static void hub_disconnect(struct usb_interface *intf) hub->buffer = NULL; } - /* If there are any children then this is an unbind only, not a - * physical disconnection. The active ports must be disabled - * and later on we must call usb_disconnect(). We can't call - * it now because we may not hold the hub's device lock. - */ - n = 0; - for (port1 = 1; port1 <= hdev->maxchild; ++port1) { - if (hdev->children[port1 - 1]) { - ++n; - hub_port_disable(hub, port1, 1); - } - } - - if (n == 0) - kfree(hub); - else { - /* Reuse the hub->leds work_struct for our own purposes */ - INIT_WORK(&hub->leds, hub_remove_children_work, hub); - schedule_work(&hub->leds); - usb_get_dev(hdev); - } + kfree(hub); } static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) @@ -917,26 +905,6 @@ hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data) } } -/* caller has locked the hub device */ -static void hub_pre_reset(struct usb_hub *hub) -{ - struct usb_device *hdev = hub->hdev; - int i; - - for (i = 0; i < hdev->maxchild; ++i) { - if (hdev->children[i]) - usb_disconnect(&hdev->children[i]); - } - hub_quiesce(hub); -} - -/* caller has locked the hub device */ -static void hub_post_reset(struct usb_hub *hub) -{ - hub_activate(hub); - hub_power_on(hub); -} - /* grab device/port lock, returning index of that port (zero based). * protects the upstream link used by this device from concurrent @@ -2682,7 +2650,7 @@ static void hub_events(void) /* If the hub has died, clean up after it */ if (hdev->state == USB_STATE_NOTATTACHED) { - hub_pre_reset(hub); + hub_pre_reset(hub, 0); goto loop; } @@ -2997,7 +2965,7 @@ int usb_reset_device(struct usb_device *udev) udev->actconfig->interface[0]->dev.driver == &hub_driver.driver && (hub = hdev_to_hub(udev)) != NULL) { - hub_pre_reset(hub); + hub_pre_reset(hub, 0); } set_bit(port1, parent_hub->busy_bits); -- cgit v1.2.3 From 4bf0ba861442d289eebfad8ea9ce365ab04fd582 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 21 Nov 2005 11:58:07 -0500 Subject: [PATCH] USB: Fix locking for USB suspend/resume The earlier USB locking updates didn't touch the suspend/resume routines. They need updating as well, since now the caller holds the device semaphore. This patch (as608) makes the necessary changes. It also adds a line to store the correct power state when a device is resumed, something which was unaccountably missing. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 54 ++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 39 insertions(+), 15 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 02601f412f9d..895ac829b9cf 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1648,15 +1648,22 @@ static int __usb_suspend_device (struct usb_device *udev, int port1) int usb_suspend_device(struct usb_device *udev) { #ifdef CONFIG_USB_SUSPEND - int port1, status; + int port1; - port1 = locktree(udev); - if (port1 < 0) - return port1; + if (udev->state == USB_STATE_NOTATTACHED) + return -ENODEV; + if (!udev->parent) + port1 = 0; + else { + for (port1 = udev->parent->maxchild; port1 > 0; --port1) { + if (udev->parent->children[port1-1] == udev) + break; + } + if (port1 == 0) + return -ENODEV; + } - status = __usb_suspend_device(udev, port1); - usb_unlock_device(udev); - return status; + return __usb_suspend_device(udev, port1); #else /* NOTE: udev->state unchanged, it's not lying ... */ udev->dev.power.power_state = PMSG_SUSPEND; @@ -1688,6 +1695,7 @@ static int finish_device_resume(struct usb_device *udev) usb_set_device_state(udev, udev->actconfig ? USB_STATE_CONFIGURED : USB_STATE_ADDRESS); + udev->dev.power.power_state = PMSG_ON; /* 10.5.4.5 says be sure devices in the tree are still there. * For now let's assume the device didn't go crazy on resume, @@ -1723,8 +1731,14 @@ static int finish_device_resume(struct usb_device *udev) * may have a child resume event to deal with soon */ resume = udev->dev.bus->resume; - for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) - (void) resume(&udev->actconfig->interface[i]->dev); + for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { + struct device *dev = + &udev->actconfig->interface[i]->dev; + + down(&dev->sem); + (void) resume(dev); + up(&dev->sem); + } status = 0; } else if (udev->devnum <= 0) { @@ -1809,9 +1823,18 @@ int usb_resume_device(struct usb_device *udev) { int port1, status; - port1 = locktree(udev); - if (port1 < 0) - return port1; + if (udev->state == USB_STATE_NOTATTACHED) + return -ENODEV; + if (!udev->parent) + port1 = 0; + else { + for (port1 = udev->parent->maxchild; port1 > 0; --port1) { + if (udev->parent->children[port1-1] == udev) + break; + } + if (port1 == 0) + return -ENODEV; + } #ifdef CONFIG_USB_SUSPEND /* selective resume of one downstream hub-to-device port */ @@ -1830,11 +1853,12 @@ int usb_resume_device(struct usb_device *udev) dev_dbg(&udev->dev, "can't resume, status %d\n", status); - usb_unlock_device(udev); - /* rebind drivers that had no suspend() */ - if (status == 0) + if (status == 0) { + usb_unlock_device(udev); bus_rescan_devices(&usb_bus_type); + usb_lock_device(udev); + } return status; } -- cgit v1.2.3 From 3d48586cfa2e197515605ccf74527983d35638e3 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sun, 20 Nov 2005 23:56:11 +0100 Subject: [PATCH] USB: small cleanups This patch contains the following cleanups: - make needlessly global functions static - every file should #include the headers containing the prototypes for it's global functions Signed-off-by: Adrian Bunk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/atm/usbatm.c | 4 ++-- drivers/usb/serial/io_ti.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index 2e6593e6c1bd..9baa6296fc95 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -646,14 +646,14 @@ static void usbatm_destroy_instance(struct kref *kref) kfree(instance); } -void usbatm_get_instance(struct usbatm_data *instance) +static void usbatm_get_instance(struct usbatm_data *instance) { dbg("%s", __func__); kref_get(&instance->refcount); } -void usbatm_put_instance(struct usbatm_data *instance) +static void usbatm_put_instance(struct usbatm_data *instance) { dbg("%s", __func__); diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 22ad1a5a8f9e..2edf9cabad20 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2843,7 +2843,7 @@ static struct edge_buf *edge_buf_alloc(unsigned int size) * Free the buffer and all associated memory. */ -void edge_buf_free(struct edge_buf *eb) +static void edge_buf_free(struct edge_buf *eb) { if (eb) { kfree(eb->buf_buf); -- cgit v1.2.3 From 949bf6431189c62eeebd3b52201406ba9978f525 Mon Sep 17 00:00:00 2001 From: Fengwei Yin Date: Fri, 18 Nov 2005 10:35:36 +0800 Subject: [PATCH] USB: One potential problem in gadget/serial.c It looks like that the gs_serial module maybe sleep with spinlock in gs_close. Sometimes, system hang when I remove the gs_serial module. From: Fengwei Yin Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/serial.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index b35ac6d334f8..65e084a2c87e 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -890,10 +890,12 @@ static void gs_close(struct tty_struct *tty, struct file *file) /* wait for write buffer to drain, or */ /* at most GS_CLOSE_TIMEOUT seconds */ if (gs_buf_data_avail(port->port_write_buf) > 0) { + spin_unlock_irqrestore(&port->port_lock, flags); wait_cond_interruptible_timeout(port->port_write_wait, port->port_dev == NULL || gs_buf_data_avail(port->port_write_buf) == 0, &port->port_lock, flags, GS_CLOSE_TIMEOUT * HZ); + spin_lock_irqsave(&port->port_lock, flags); } /* free disconnected port on final close */ -- cgit v1.2.3 From 55c527187c9d78f840b284d596a0b298bc1493af Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 23 Nov 2005 12:03:12 -0500 Subject: [PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 5 +- drivers/usb/core/hub.c | 229 ++++++++++++++++++++++++++++++--------------- drivers/usb/core/hub.h | 3 +- drivers/usb/core/message.c | 6 ++ include/linux/usb.h | 2 + 5 files changed, 164 insertions(+), 81 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index d16a0e8a7d72..0018bbc4de34 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1825,8 +1825,6 @@ int usb_add_hcd(struct usb_hcd *hcd, retval = -ENOMEM; goto err_allocate_root_hub; } - rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH : - USB_SPEED_FULL; /* Although in principle hcd->driver->start() might need to use rhdev, * none of the current drivers do. @@ -1844,6 +1842,9 @@ int usb_add_hcd(struct usb_hcd *hcd, dev_dbg(hcd->self.controller, "supports USB remote wakeup\n"); hcd->remote_wakeup = hcd->can_wakeup; + rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH : + USB_SPEED_FULL; + rhdev->bus_mA = min(500u, hcd->power_budget); if ((retval = register_root_hub(rhdev, hcd)) != 0) goto err_register_root_hub; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 895ac829b9cf..b311005ff1a6 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -702,26 +702,40 @@ static int hub_configure(struct usb_hub *hub, * and battery-powered root hubs (may provide just 8 mA). */ ret = usb_get_status(hdev, USB_RECIP_DEVICE, 0, &hubstatus); - if (ret < 0) { + if (ret < 2) { message = "can't get hub status"; goto fail; } le16_to_cpus(&hubstatus); if (hdev == hdev->bus->root_hub) { - struct usb_hcd *hcd = - container_of(hdev->bus, struct usb_hcd, self); - - hub->power_budget = min(500u, hcd->power_budget) / 2; + if (hdev->bus_mA == 0 || hdev->bus_mA >= 500) + hub->mA_per_port = 500; + else { + hub->mA_per_port = hdev->bus_mA; + hub->limited_power = 1; + } } else if ((hubstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0) { dev_dbg(hub_dev, "hub controller current requirement: %dmA\n", hub->descriptor->bHubContrCurrent); - hub->power_budget = (501 - hub->descriptor->bHubContrCurrent) - / 2; + hub->limited_power = 1; + if (hdev->maxchild > 0) { + int remaining = hdev->bus_mA - + hub->descriptor->bHubContrCurrent; + + if (remaining < hdev->maxchild * 100) + dev_warn(hub_dev, + "insufficient power available " + "to use all downstream ports\n"); + hub->mA_per_port = 100; /* 7.2.1.1 */ + } + } else { /* Self-powered external hub */ + /* FIXME: What about battery-powered external hubs that + * provide less current per port? */ + hub->mA_per_port = 500; } - if (hub->power_budget) - dev_dbg(hub_dev, "%dmA bus power budget for children\n", - hub->power_budget * 2); - + if (hub->mA_per_port < 500) + dev_dbg(hub_dev, "%umA bus power budget for each child\n", + hub->mA_per_port); ret = hub_hub_status(hub, &hubstatus, &hubchange); if (ret < 0) { @@ -1136,45 +1150,107 @@ void usb_disconnect(struct usb_device **pdev) device_unregister(&udev->dev); } +static inline const char *plural(int n) +{ + return (n == 1 ? "" : "s"); +} + static int choose_configuration(struct usb_device *udev) { - int c, i; + int i; + u16 devstatus; + int bus_powered; + int num_configs; + struct usb_host_config *c, *best; + + /* If this fails, assume the device is bus-powered */ + devstatus = 0; + usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus); + le16_to_cpus(&devstatus); + bus_powered = ((devstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0); + dev_dbg(&udev->dev, "device is %s-powered\n", + bus_powered ? "bus" : "self"); + + best = NULL; + c = udev->config; + num_configs = udev->descriptor.bNumConfigurations; + for (i = 0; i < num_configs; (i++, c++)) { + struct usb_interface_descriptor *desc = + &c->intf_cache[0]->altsetting->desc; + + /* + * HP's USB bus-powered keyboard has only one configuration + * and it claims to be self-powered; other devices may have + * similar errors in their descriptors. If the next test + * were allowed to execute, such configurations would always + * be rejected and the devices would not work as expected. + */ +#if 0 + /* Rule out self-powered configs for a bus-powered device */ + if (bus_powered && (c->desc.bmAttributes & + USB_CONFIG_ATT_SELFPOWER)) + continue; +#endif - /* NOTE: this should interact with hub power budgeting */ + /* + * The next test may not be as effective as it should be. + * Some hubs have errors in their descriptor, claiming + * to be self-powered when they are really bus-powered. + * We will overestimate the amount of current such hubs + * make available for each port. + * + * This is a fairly benign sort of failure. It won't + * cause us to reject configurations that we should have + * accepted. + */ - c = udev->config[0].desc.bConfigurationValue; - if (udev->descriptor.bNumConfigurations != 1) { - for (i = 0; i < udev->descriptor.bNumConfigurations; i++) { - struct usb_interface_descriptor *desc; + /* Rule out configs that draw too much bus current */ + if (c->desc.bMaxPower * 2 > udev->bus_mA) + continue; - /* heuristic: Linux is more likely to have class - * drivers, so avoid vendor-specific interfaces. - */ - desc = &udev->config[i].intf_cache[0] - ->altsetting->desc; - if (desc->bInterfaceClass == USB_CLASS_VENDOR_SPEC) - continue; - /* COMM/2/all is CDC ACM, except 0xff is MSFT RNDIS. - * MSFT needs this to be the first config; never use - * it as the default unless Linux has host-side RNDIS. - * A second config would ideally be CDC-Ethernet, but - * may instead be the "vendor specific" CDC subset - * long used by ARM Linux for sa1100 or pxa255. - */ - if (desc->bInterfaceClass == USB_CLASS_COMM - && desc->bInterfaceSubClass == 2 - && desc->bInterfaceProtocol == 0xff) { - c = udev->config[1].desc.bConfigurationValue; - continue; - } - c = udev->config[i].desc.bConfigurationValue; + /* If the first config's first interface is COMM/2/0xff + * (MSFT RNDIS), rule it out unless Linux has host-side + * RNDIS support. */ + if (i == 0 && desc->bInterfaceClass == USB_CLASS_COMM + && desc->bInterfaceSubClass == 2 + && desc->bInterfaceProtocol == 0xff) { +#ifndef CONFIG_USB_NET_RNDIS + continue; +#else + best = c; +#endif + } + + /* From the remaining configs, choose the first one whose + * first interface is for a non-vendor-specific class. + * Reason: Linux is more likely to have a class driver + * than a vendor-specific driver. */ + else if (udev->descriptor.bDeviceClass != + USB_CLASS_VENDOR_SPEC && + desc->bInterfaceClass != + USB_CLASS_VENDOR_SPEC) { + best = c; break; } + + /* If all the remaining configs are vendor-specific, + * choose the first one. */ + else if (!best) + best = c; + } + + if (best) { + i = best->desc.bConfigurationValue; dev_info(&udev->dev, - "configuration #%d chosen from %d choices\n", - c, udev->descriptor.bNumConfigurations); + "configuration #%d chosen from %d choice%s\n", + i, num_configs, plural(num_configs)); + } else { + i = -1; + dev_warn(&udev->dev, + "no configuration chosen from %d choice%s\n", + num_configs, plural(num_configs)); } - return c; + return i; } #ifdef DEBUG @@ -1327,17 +1403,13 @@ int usb_new_device(struct usb_device *udev) * with the driver core, and lets usb device drivers bind to them. */ c = choose_configuration(udev); - if (c < 0) - dev_warn(&udev->dev, - "can't choose an initial configuration\n"); - else { + if (c >= 0) { err = usb_set_configuration(udev, c); if (err) { dev_err(&udev->dev, "can't set config #%d, error %d\n", c, err); - usb_remove_sysfs_dev_files(udev); - device_del(&udev->dev); - goto fail; + /* This need not be fatal. The user can try to + * set other configurations. */ } } @@ -1702,7 +1774,7 @@ static int finish_device_resume(struct usb_device *udev) * and device drivers will know about any resume quirks. */ status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus); - if (status < 0) + if (status < 2) dev_dbg(&udev->dev, "gone after usb resume? status %d\n", status); @@ -1711,7 +1783,7 @@ static int finish_device_resume(struct usb_device *udev) int (*resume)(struct device *); le16_to_cpus(&devstatus); - if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP) + if ((devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) && udev->parent) { status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), @@ -2374,39 +2446,36 @@ hub_power_remaining (struct usb_hub *hub) { struct usb_device *hdev = hub->hdev; int remaining; - unsigned i; + int port1; - remaining = hub->power_budget; - if (!remaining) /* self-powered */ + if (!hub->limited_power) return 0; - for (i = 0; i < hdev->maxchild; i++) { - struct usb_device *udev = hdev->children[i]; - int delta, ceiling; + remaining = hdev->bus_mA - hub->descriptor->bHubContrCurrent; + for (port1 = 1; port1 <= hdev->maxchild; ++port1) { + struct usb_device *udev = hdev->children[port1 - 1]; + int delta; if (!udev) continue; - /* 100mA per-port ceiling, or 8mA for OTG ports */ - if (i != (udev->bus->otg_port - 1) || hdev->parent) - ceiling = 50; - else - ceiling = 4; - + /* Unconfigured devices may not use more than 100mA, + * or 8mA for OTG ports */ if (udev->actconfig) - delta = udev->actconfig->desc.bMaxPower; + delta = udev->actconfig->desc.bMaxPower * 2; + else if (port1 != udev->bus->otg_port || hdev->parent) + delta = 100; else - delta = ceiling; - // dev_dbg(&udev->dev, "budgeted %dmA\n", 2 * delta); - if (delta > ceiling) - dev_warn(&udev->dev, "%dmA over %dmA budget!\n", - 2 * (delta - ceiling), 2 * ceiling); + delta = 8; + if (delta > hub->mA_per_port) + dev_warn(&udev->dev, "%dmA is over %umA budget " + "for port %d!\n", + delta, hub->mA_per_port, port1); remaining -= delta; } if (remaining < 0) { - dev_warn(hub->intfdev, - "%dmA over power budget!\n", - -2 * remaining); + dev_warn(hub->intfdev, "%dmA over power budget!\n", + - remaining); remaining = 0; } return remaining; @@ -2501,7 +2570,8 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, usb_set_device_state(udev, USB_STATE_POWERED); udev->speed = USB_SPEED_UNKNOWN; - + udev->bus_mA = hub->mA_per_port; + /* set the address */ choose_address(udev); if (udev->devnum <= 0) { @@ -2521,16 +2591,16 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, * on the parent. */ if (udev->descriptor.bDeviceClass == USB_CLASS_HUB - && hub->power_budget) { + && udev->bus_mA <= 100) { u16 devstat; status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstat); - if (status < 0) { + if (status < 2) { dev_dbg(&udev->dev, "get status %d ?\n", status); goto loop_disable; } - cpu_to_le16s(&devstat); + le16_to_cpus(&devstat); if ((devstat & (1 << USB_DEVICE_SELF_POWERED)) == 0) { dev_err(&udev->dev, "can't connect bus-powered hub " @@ -2583,9 +2653,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, status = hub_power_remaining(hub); if (status) - dev_dbg(hub_dev, - "%dmA power budget left\n", - 2 * status); + dev_dbg(hub_dev, "%dmA power budget left\n", status); return; @@ -2797,6 +2865,11 @@ static void hub_events(void) if (hubchange & HUB_CHANGE_LOCAL_POWER) { dev_dbg (hub_dev, "power change\n"); clear_hub_feature(hdev, C_HUB_LOCAL_POWER); + if (hubstatus & HUB_STATUS_LOCAL_POWER) + /* FIXME: Is this always true? */ + hub->limited_power = 0; + else + hub->limited_power = 1; } if (hubchange & HUB_CHANGE_OVERCURRENT) { dev_dbg (hub_dev, "overcurrent change\n"); diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index bf23f8978024..29d5f45a8456 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -220,8 +220,9 @@ struct usb_hub { struct usb_hub_descriptor *descriptor; /* class descriptor */ struct usb_tt tt; /* Transaction Translator */ - u8 power_budget; /* in 2mA units; or zero */ + unsigned mA_per_port; /* current for each child */ + unsigned limited_power:1; unsigned quiescing:1; unsigned activating:1; unsigned resume_root_hub:1; diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index fe74f99ca5f4..99ab774d4fdb 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1387,6 +1387,12 @@ free_interfaces: if (dev->state != USB_STATE_ADDRESS) usb_disable_device (dev, 1); // Skip ep0 + n = dev->bus_mA - cp->desc.bMaxPower * 2; + if (n < 0) + dev_warn(&dev->dev, "new config #%d exceeds power " + "limit by %dmA\n", + configuration, -n); + if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION, 0, configuration, 0, NULL, 0, USB_CTRL_SET_TIMEOUT)) < 0) diff --git a/include/linux/usb.h b/include/linux/usb.h index 46dc0421d19e..27575e678a7c 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -347,6 +347,8 @@ struct usb_device { char **rawdescriptors; /* Raw descriptors for each config */ + unsigned short bus_mA; /* Current available from the bus */ + int have_langid; /* whether string_langid is valid */ int string_langid; /* language ID for strings */ -- cgit v1.2.3 From 12c3da346eb81b6a281031f62eda3bca993dff5a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 23 Nov 2005 12:09:52 -0500 Subject: [PATCH] USB: Store port number in usb_device This patch (as610) adds a field to struct usb_device to store the device's port number. This allows us to remove several loops in the hub driver (searching for a particular device among all the entries in the parent's array of children). Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 79 ++++++++++++-------------------------------------- drivers/usb/core/usb.c | 1 + include/linux/usb.h | 1 + 3 files changed, 20 insertions(+), 61 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b311005ff1a6..a523c8f20b5d 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -946,24 +946,21 @@ static int locktree(struct usb_device *udev) t = locktree(hdev); if (t < 0) return t; - for (t = 0; t < hdev->maxchild; t++) { - if (hdev->children[t] == udev) { - /* everything is fail-fast once disconnect - * processing starts - */ - if (udev->state == USB_STATE_NOTATTACHED) - break; - /* when everyone grabs locks top->bottom, - * non-overlapping work may be concurrent - */ - usb_lock_device(udev); - usb_unlock_device(hdev); - return t + 1; - } + /* everything is fail-fast once disconnect + * processing starts + */ + if (udev->state == USB_STATE_NOTATTACHED) { + usb_unlock_device(hdev); + return -ENODEV; } + + /* when everyone grabs locks top->bottom, + * non-overlapping work may be concurrent + */ + usb_lock_device(udev); usb_unlock_device(hdev); - return -ENODEV; + return udev->portnum; } static void recursively_mark_NOTATTACHED(struct usb_device *udev) @@ -1335,15 +1332,9 @@ int usb_new_device(struct usb_device *udev) le16_to_cpu(udev->config[0].desc.wTotalLength), USB_DT_OTG, (void **) &desc) == 0) { if (desc->bmAttributes & USB_OTG_HNP) { - unsigned port1; + unsigned port1 = udev->portnum; struct usb_device *root = udev->parent; - for (port1 = 1; port1 <= root->maxchild; - port1++) { - if (root->children[port1-1] == udev) - break; - } - dev_info(&udev->dev, "Dual-Role OTG device on %sHNP port\n", (port1 == bus->otg_port) @@ -1720,22 +1711,9 @@ static int __usb_suspend_device (struct usb_device *udev, int port1) int usb_suspend_device(struct usb_device *udev) { #ifdef CONFIG_USB_SUSPEND - int port1; - if (udev->state == USB_STATE_NOTATTACHED) return -ENODEV; - if (!udev->parent) - port1 = 0; - else { - for (port1 = udev->parent->maxchild; port1 > 0; --port1) { - if (udev->parent->children[port1-1] == udev) - break; - } - if (port1 == 0) - return -ENODEV; - } - - return __usb_suspend_device(udev, port1); + return __usb_suspend_device(udev, udev->portnum); #else /* NOTE: udev->state unchanged, it's not lying ... */ udev->dev.power.power_state = PMSG_SUSPEND; @@ -1893,20 +1871,10 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) */ int usb_resume_device(struct usb_device *udev) { - int port1, status; + int status; if (udev->state == USB_STATE_NOTATTACHED) return -ENODEV; - if (!udev->parent) - port1 = 0; - else { - for (port1 = udev->parent->maxchild; port1 > 0; --port1) { - if (udev->parent->children[port1-1] == udev) - break; - } - if (port1 == 0) - return -ENODEV; - } #ifdef CONFIG_USB_SUSPEND /* selective resume of one downstream hub-to-device port */ @@ -1915,7 +1883,7 @@ int usb_resume_device(struct usb_device *udev) // NOTE swsusp may bork us, device state being wrong... // NOTE this fails if parent is also suspended... status = hub_port_resume(hdev_to_hub(udev->parent), - port1, udev); + udev->portnum, udev); } else status = 0; } else @@ -3029,7 +2997,8 @@ int usb_reset_device(struct usb_device *udev) struct usb_hub *parent_hub; struct usb_device_descriptor descriptor = udev->descriptor; struct usb_hub *hub = NULL; - int i, ret = 0, port1 = -1; + int i, ret = 0; + int port1 = udev->portnum; if (udev->state == USB_STATE_NOTATTACHED || udev->state == USB_STATE_SUSPENDED) { @@ -3043,18 +3012,6 @@ int usb_reset_device(struct usb_device *udev) dev_dbg(&udev->dev, "%s for root hub!\n", __FUNCTION__); return -EISDIR; } - - for (i = 0; i < parent_hdev->maxchild; i++) - if (parent_hdev->children[i] == udev) { - port1 = i + 1; - break; - } - - if (port1 < 0) { - /* If this ever happens, it's very bad */ - dev_err(&udev->dev, "Can't locate device's port!\n"); - return -ENOENT; - } parent_hub = hdev_to_hub(parent_hdev); /* If we're resetting an active hub, take some special actions */ diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index fcfda21be499..39e6b61b898a 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -439,6 +439,7 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1) /* hub driver sets up TT records */ } + dev->portnum = port1; dev->bus = bus; dev->parent = parent; INIT_LIST_HEAD(&dev->filelist); diff --git a/include/linux/usb.h b/include/linux/usb.h index 27575e678a7c..e59d1bd52d4f 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -348,6 +348,7 @@ struct usb_device { char **rawdescriptors; /* Raw descriptors for each config */ unsigned short bus_mA; /* Current available from the bus */ + u8 portnum; /* Parent port number (origin 1) */ int have_langid; /* whether string_langid is valid */ int string_langid; /* language ID for strings */ -- cgit v1.2.3 From 3aea4a76a3ec4e6484f6316a97efff8b144b2b11 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Sun, 27 Nov 2005 09:47:28 -0500 Subject: [PATCH] USB: Cleanups for usb gadget mass-storage Remove useless initalizers. Signed-off-by: Pavel Machek Signed-off-by: Alan Stern --- drivers/usb/gadget/file_storage.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index f6f0b2aa1145..f6c49b717d3f 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -336,8 +336,8 @@ MODULE_LICENSE("Dual BSD/GPL"); #define MAX_LUNS 8 /* Arggh! There should be a module_param_array_named macro! */ -static char *file[MAX_LUNS] = {NULL, }; -static int ro[MAX_LUNS] = {0, }; +static char *file[MAX_LUNS]; +static int ro[MAX_LUNS]; static struct { int num_filenames; -- cgit v1.2.3 From 717f736d937d0e98e964375dac770bfa20f73b72 Mon Sep 17 00:00:00 2001 From: Olav Kongas Date: Sat, 26 Nov 2005 01:58:36 +0200 Subject: [PATCH] USB: isp116x-hcd: minor cleanup When going to suspend, there's no point in setting HC state in host controller driver as USB core takes care of this. Signed-off-by: Olav Kongas Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp116x-hcd.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index c95af116f9e7..83447919202f 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1426,7 +1426,6 @@ static int isp116x_bus_suspend(struct usb_hcd *hcd) val = isp116x_read_reg32(isp116x, HCCONTROL); switch (val & HCCONTROL_HCFS) { case HCCONTROL_USB_OPER: - hcd->state = HC_STATE_QUIESCING; val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE); val |= HCCONTROL_USB_SUSPEND; if (device_may_wakeup(&hcd->self.root_hub->dev)) @@ -1434,7 +1433,6 @@ static int isp116x_bus_suspend(struct usb_hcd *hcd) /* Wait for usb transfers to finish */ mdelay(2); isp116x_write_reg32(isp116x, HCCONTROL, val); - hcd->state = HC_STATE_SUSPENDED; /* Wait for devices to suspend */ mdelay(5); case HCCONTROL_USB_SUSPEND: -- cgit v1.2.3 From 487f9c6710e7dff338e59820f6cfaeaaa87cb532 Mon Sep 17 00:00:00 2001 From: Luiz Fernando Capitulino Date: Mon, 28 Nov 2005 19:16:05 -0200 Subject: [PATCH] USB: usbserial: Adds missing checks and bug fix. Checks if 'port' is NULL before using it in all tty operations, this can avoid NULL pointer dereferences. Signed-off-by: Luiz Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 12aaf18ff9ea..5bc023c73893 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -188,6 +188,8 @@ static int serial_open (struct tty_struct *tty, struct file * filp) portNumber = tty->index - serial->minor; port = serial->port[portNumber]; + if (!port) + return -ENODEV; ++port->open_count; @@ -258,6 +260,9 @@ static int serial_write (struct tty_struct * tty, const unsigned char *buf, int struct usb_serial_port *port = tty->driver_data; int retval = -EINVAL; + if (!port) + goto exit; + dbg("%s - port %d, %d byte(s)", __FUNCTION__, port->number, count); if (!port->open_count) { @@ -277,6 +282,9 @@ static int serial_write_room (struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; int retval = -EINVAL; + if (!port) + goto exit; + dbg("%s - port %d", __FUNCTION__, port->number); if (!port->open_count) { @@ -296,6 +304,9 @@ static int serial_chars_in_buffer (struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; int retval = -EINVAL; + if (!port) + goto exit; + dbg("%s = port %d", __FUNCTION__, port->number); if (!port->open_count) { @@ -314,6 +325,9 @@ static void serial_throttle (struct tty_struct * tty) { struct usb_serial_port *port = tty->driver_data; + if (!port) + return; + dbg("%s - port %d", __FUNCTION__, port->number); if (!port->open_count) { @@ -330,6 +344,9 @@ static void serial_unthrottle (struct tty_struct * tty) { struct usb_serial_port *port = tty->driver_data; + if (!port) + return; + dbg("%s - port %d", __FUNCTION__, port->number); if (!port->open_count) { @@ -347,6 +364,9 @@ static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned in struct usb_serial_port *port = tty->driver_data; int retval = -ENODEV; + if (!port) + goto exit; + dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd); if (!port->open_count) { @@ -368,6 +388,9 @@ static void serial_set_termios (struct tty_struct *tty, struct termios * old) { struct usb_serial_port *port = tty->driver_data; + if (!port) + return; + dbg("%s - port %d", __FUNCTION__, port->number); if (!port->open_count) { @@ -384,6 +407,9 @@ static void serial_break (struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; + if (!port) + return; + dbg("%s - port %d", __FUNCTION__, port->number); if (!port->open_count) { @@ -445,6 +471,9 @@ static int serial_tiocmget (struct tty_struct *tty, struct file *file) { struct usb_serial_port *port = tty->driver_data; + if (!port) + goto exit; + dbg("%s - port %d", __FUNCTION__, port->number); if (!port->open_count) { @@ -464,6 +493,9 @@ static int serial_tiocmset (struct tty_struct *tty, struct file *file, { struct usb_serial_port *port = tty->driver_data; + if (!port) + goto exit; + dbg("%s - port %d", __FUNCTION__, port->number); if (!port->open_count) { -- cgit v1.2.3 From 8a4613f01f5bb850cab34e3db572d97251d997b3 Mon Sep 17 00:00:00 2001 From: Luiz Fernando Capitulino Date: Mon, 28 Nov 2005 19:16:07 -0200 Subject: [PATCH] USB: usbserial: race-condition fix. There is a race-condition in usb-serial driver that can be triggered if a processes does 'port->tty->driver_data = NULL' in serial_close() while other processes is in kernel-space about to call serial_ioctl() on the same port. This happens because a process can open the device while there is another one closing it. The patch below fixes that by adding a semaphore to ensure that no process will open the device while another process is closing it. Note that we can't use spinlocks here, since serial_open() and serial_close() can sleep. Signed-off-by: Luiz Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 14 +++++++++++++- drivers/usb/serial/usb-serial.h | 4 ++++ 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 5bc023c73893..8bc8337c99c4 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include "usb-serial.h" #include "pl2303.h" @@ -190,6 +191,9 @@ static int serial_open (struct tty_struct *tty, struct file * filp) port = serial->port[portNumber]; if (!port) return -ENODEV; + + if (down_interruptible(&port->sem)) + return -ERESTARTSYS; ++port->open_count; @@ -215,6 +219,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp) goto bailout_module_put; } + up(&port->sem); return 0; bailout_module_put: @@ -222,6 +227,7 @@ bailout_module_put: bailout_kref_put: kref_put(&serial->kref, destroy_serial); port->open_count = 0; + up(&port->sem); return retval; } @@ -234,8 +240,10 @@ static void serial_close(struct tty_struct *tty, struct file * filp) dbg("%s - port %d", __FUNCTION__, port->number); + down(&port->sem); + if (port->open_count == 0) - return; + goto out; --port->open_count; if (port->open_count == 0) { @@ -253,6 +261,9 @@ static void serial_close(struct tty_struct *tty, struct file * filp) } kref_put(&port->serial->kref, destroy_serial); + +out: + up(&port->sem); } static int serial_write (struct tty_struct * tty, const unsigned char *buf, int count) @@ -774,6 +785,7 @@ int usb_serial_probe(struct usb_interface *interface, port->number = i + serial->minor; port->serial = serial; spin_lock_init(&port->lock); + sema_init(&port->sem, 1); INIT_WORK(&port->work, usb_serial_port_softint, port); serial->port[i] = port; } diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index 238a5a871ed6..d7d27c3385b3 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -16,6 +16,7 @@ #include #include +#include #define SERIAL_TTY_MAJOR 188 /* Nice legal number now */ #define SERIAL_TTY_MINORS 255 /* loads of devices :) */ @@ -30,6 +31,8 @@ * @serial: pointer back to the struct usb_serial owner of this port. * @tty: pointer to the corresponding tty for this port. * @lock: spinlock to grab when updating portions of this structure. + * @sem: semaphore used to synchronize serial_open() and serial_close() + * access for this port. * @number: the number of the port (the minor number). * @interrupt_in_buffer: pointer to the interrupt in buffer for this port. * @interrupt_in_urb: pointer to the interrupt in struct urb for this port. @@ -60,6 +63,7 @@ struct usb_serial_port { struct usb_serial * serial; struct tty_struct * tty; spinlock_t lock; + struct semaphore sem; unsigned char number; unsigned char * interrupt_in_buffer; -- cgit v1.2.3 From 5d3202949c9ac6e135d98bde15a8f05ad3fa5849 Mon Sep 17 00:00:00 2001 From: Daniel Ritz Date: Sun, 27 Nov 2005 22:23:38 +0100 Subject: [PATCH] USB: input/touchkitusb: handle multiple packets Some versions of the controller seem to put multiple report packet into a single urb. also it can happen that a packet is split across multiple urbs. unpatched you get a jumpy cursor on some screens. the patch does: - handle multiple packets per urb - handle packets split across multiple urb - check packet type - cleanups Signed-off-by: Daniel Ritz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/touchkitusb.c | 148 ++++++++++++++++++++++++++++++++++------ 1 file changed, 126 insertions(+), 22 deletions(-) diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c index 75e7c12e7189..3b3c7b4120a2 100644 --- a/drivers/usb/input/touchkitusb.c +++ b/drivers/usb/input/touchkitusb.c @@ -1,7 +1,7 @@ /****************************************************************************** * touchkitusb.c -- Driver for eGalax TouchKit USB Touchscreens * - * Copyright (C) 2004 by Daniel Ritz + * Copyright (C) 2004-2005 by Daniel Ritz * Copyright (C) by Todd E. Johnson (mtouchusb.c) * * This program is free software; you can redistribute it and/or @@ -41,15 +41,13 @@ #define TOUCHKIT_MAX_YC 0x07ff #define TOUCHKIT_YC_FUZZ 0x0 #define TOUCHKIT_YC_FLAT 0x0 -#define TOUCHKIT_REPORT_DATA_SIZE 8 +#define TOUCHKIT_REPORT_DATA_SIZE 16 #define TOUCHKIT_DOWN 0x01 -#define TOUCHKIT_POINT_TOUCH 0x81 -#define TOUCHKIT_POINT_NOTOUCH 0x80 -#define TOUCHKIT_GET_TOUCHED(dat) ((((dat)[0]) & TOUCHKIT_DOWN) ? 1 : 0) -#define TOUCHKIT_GET_X(dat) (((dat)[3] << 7) | (dat)[4]) -#define TOUCHKIT_GET_Y(dat) (((dat)[1] << 7) | (dat)[2]) +#define TOUCHKIT_PKT_TYPE_MASK 0xFE +#define TOUCHKIT_PKT_TYPE_REPT 0x80 +#define TOUCHKIT_PKT_TYPE_DIAG 0x0A #define DRIVER_VERSION "v0.1" #define DRIVER_AUTHOR "Daniel Ritz " @@ -62,6 +60,8 @@ MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped."); struct touchkit_usb { unsigned char *data; dma_addr_t data_dma; + char buffer[TOUCHKIT_REPORT_DATA_SIZE]; + int buf_len; struct urb *irq; struct usb_device *udev; struct input_dev *input; @@ -77,11 +77,128 @@ static struct usb_device_id touchkit_devices[] = { {} }; +/* helpers to read the data */ +static inline int touchkit_get_touched(char *data) +{ + return (data[0] & TOUCHKIT_DOWN) ? 1 : 0; +} + +static inline int touchkit_get_x(char *data) +{ + return ((data[3] & 0x0F) << 7) | (data[4] & 0x7F); +} + +static inline int touchkit_get_y(char *data) +{ + return ((data[1] & 0x0F) << 7) | (data[2] & 0x7F); +} + + +/* processes one input packet. */ +static void touchkit_process_pkt(struct touchkit_usb *touchkit, + struct pt_regs *regs, char *pkt) +{ + int x, y; + + /* only process report packets */ + if ((pkt[0] & TOUCHKIT_PKT_TYPE_MASK) != TOUCHKIT_PKT_TYPE_REPT) + return; + + if (swap_xy) { + y = touchkit_get_x(pkt); + x = touchkit_get_y(pkt); + } else { + x = touchkit_get_x(pkt); + y = touchkit_get_y(pkt); + } + + input_regs(touchkit->input, regs); + input_report_key(touchkit->input, BTN_TOUCH, touchkit_get_touched(pkt)); + input_report_abs(touchkit->input, ABS_X, x); + input_report_abs(touchkit->input, ABS_Y, y); + input_sync(touchkit->input); +} + + +static int touchkit_get_pkt_len(char *buf) +{ + switch (buf[0] & TOUCHKIT_PKT_TYPE_MASK) { + case TOUCHKIT_PKT_TYPE_REPT: + return 5; + + case TOUCHKIT_PKT_TYPE_DIAG: + return buf[1] + 2; + } + + return 0; +} + +static void touchkit_process(struct touchkit_usb *touchkit, int len, + struct pt_regs *regs) +{ + char *buffer; + int pkt_len, buf_len, pos; + + /* if the buffer contains data, append */ + if (unlikely(touchkit->buf_len)) { + int tmp; + + /* if only 1 byte in buffer, add another one to get length */ + if (touchkit->buf_len == 1) + touchkit->buffer[1] = touchkit->data[0]; + + pkt_len = touchkit_get_pkt_len(touchkit->buffer); + + /* unknown packet: drop everything */ + if (!pkt_len) + return; + + /* append, process */ + tmp = pkt_len - touchkit->buf_len; + memcpy(touchkit->buffer + touchkit->buf_len, touchkit->data, tmp); + touchkit_process_pkt(touchkit, regs, touchkit->buffer); + + buffer = touchkit->data + tmp; + buf_len = len - tmp; + } else { + buffer = touchkit->data; + buf_len = len; + } + + /* only one byte left in buffer */ + if (unlikely(buf_len == 1)) { + touchkit->buffer[0] = buffer[0]; + touchkit->buf_len = 1; + return; + } + + /* loop over the buffer */ + pos = 0; + while (pos < buf_len) { + /* get packet len */ + pkt_len = touchkit_get_pkt_len(buffer + pos); + + /* unknown packet: drop everything */ + if (unlikely(!pkt_len)) + return; + + /* full packet: process */ + if (likely(pkt_len <= buf_len)) { + touchkit_process_pkt(touchkit, regs, buffer + pos); + } else { + /* incomplete packet: save in buffer */ + memcpy(touchkit->buffer, buffer + pos, buf_len - pos); + touchkit->buf_len = buf_len - pos; + } + pos += pkt_len; + } +} + + static void touchkit_irq(struct urb *urb, struct pt_regs *regs) { struct touchkit_usb *touchkit = urb->context; int retval; - int x, y; switch (urb->status) { case 0: @@ -105,20 +222,7 @@ static void touchkit_irq(struct urb *urb, struct pt_regs *regs) goto exit; } - if (swap_xy) { - y = TOUCHKIT_GET_X(touchkit->data); - x = TOUCHKIT_GET_Y(touchkit->data); - } else { - x = TOUCHKIT_GET_X(touchkit->data); - y = TOUCHKIT_GET_Y(touchkit->data); - } - - input_regs(touchkit->input, regs); - input_report_key(touchkit->input, BTN_TOUCH, - TOUCHKIT_GET_TOUCHED(touchkit->data)); - input_report_abs(touchkit->input, ABS_X, x); - input_report_abs(touchkit->input, ABS_Y, y); - input_sync(touchkit->input); + touchkit_process(touchkit, urb->actual_length, regs); exit: retval = usb_submit_urb(urb, GFP_ATOMIC); -- cgit v1.2.3 From bd39b7f195e5a780a3c6710eb1c1450f158a1f31 Mon Sep 17 00:00:00 2001 From: Chris Humbert Date: Mon, 28 Nov 2005 09:29:23 -0800 Subject: [PATCH] USB: don't allocate dma pools for PIO HCDs USB: don't allocate dma pools for PIO HCDs hcd_buffer_alloc() and hcd_buffer_free() have a similar dma_mask check and revert to kmalloc()/kfree(), but hcd_buffer_create() doesn't check dma_mask and allocates unused dma pools. Signed-off-by: Chris Humbert Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/buffer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index 419c9943a7cb..ad742cec94fa 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -55,6 +55,9 @@ int hcd_buffer_create (struct usb_hcd *hcd) char name [16]; int i, size; + if (!hcd->self.controller->dma_mask) + return 0; + for (i = 0; i < HCD_BUFFER_POOLS; i++) { if (!(size = pool_max [i])) continue; -- cgit v1.2.3 From a21d4fed4b00eaf7e7c3b2e2b25de24f540bfa66 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 29 Nov 2005 12:04:24 -0500 Subject: [PATCH] USB Gadget: file_storage: remove "volatile" declarations This patch (as612) removes the "volatile" declarations from the file-storage gadget. It turns out that they aren't needed for anything much; adding a few memory barriers does a sufficient job. The patch also removes a wait_queue. Not much point having a queue when only one task is ever going to be on it! Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/file_storage.c | 59 +++++++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 21 deletions(-) diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index f6c49b717d3f..0cea9782d7d4 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -239,7 +239,6 @@ #include #include #include -#include #include #include @@ -251,7 +250,7 @@ #define DRIVER_DESC "File-backed Storage Gadget" #define DRIVER_NAME "g_file_storage" -#define DRIVER_VERSION "20 October 2004" +#define DRIVER_VERSION "28 November 2005" static const char longname[] = DRIVER_DESC; static const char shortname[] = DRIVER_NAME; @@ -588,7 +587,7 @@ enum fsg_buffer_state { struct fsg_buffhd { void *buf; dma_addr_t dma; - volatile enum fsg_buffer_state state; + enum fsg_buffer_state state; struct fsg_buffhd *next; /* The NetChip 2280 is faster, and handles some protocol faults @@ -597,9 +596,9 @@ struct fsg_buffhd { unsigned int bulk_out_intended_length; struct usb_request *inreq; - volatile int inreq_busy; + int inreq_busy; struct usb_request *outreq; - volatile int outreq_busy; + int outreq_busy; }; enum fsg_state { @@ -637,11 +636,11 @@ struct fsg_dev { struct usb_ep *ep0; // Handy copy of gadget->ep0 struct usb_request *ep0req; // For control responses - volatile unsigned int ep0_req_tag; + unsigned int ep0_req_tag; const char *ep0req_name; struct usb_request *intreq; // For interrupt responses - volatile int intreq_busy; + int intreq_busy; struct fsg_buffhd *intr_buffhd; unsigned int bulk_out_maxpacket; @@ -671,7 +670,6 @@ struct fsg_dev { struct fsg_buffhd *next_buffhd_to_drain; struct fsg_buffhd buffhds[NUM_BUFFERS]; - wait_queue_head_t thread_wqh; int thread_wakeup_needed; struct completion thread_notifier; struct task_struct *thread_task; @@ -1076,11 +1074,13 @@ static int populate_config_buf(struct usb_gadget *gadget, /* These routines may be called in process context or in_irq */ +/* Caller must hold fsg->lock */ static void wakeup_thread(struct fsg_dev *fsg) { /* Tell the main thread that something has happened */ fsg->thread_wakeup_needed = 1; - wake_up_all(&fsg->thread_wqh); + if (fsg->thread_task) + wake_up_process(fsg->thread_task); } @@ -1167,11 +1167,12 @@ static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) usb_ep_fifo_flush(ep); /* Hold the lock while we update the request and buffer states */ + smp_wmb(); spin_lock(&fsg->lock); bh->inreq_busy = 0; bh->state = BUF_STATE_EMPTY; - spin_unlock(&fsg->lock); wakeup_thread(fsg); + spin_unlock(&fsg->lock); } static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) @@ -1188,11 +1189,12 @@ static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) usb_ep_fifo_flush(ep); /* Hold the lock while we update the request and buffer states */ + smp_wmb(); spin_lock(&fsg->lock); bh->outreq_busy = 0; bh->state = BUF_STATE_FULL; - spin_unlock(&fsg->lock); wakeup_thread(fsg); + spin_unlock(&fsg->lock); } @@ -1209,11 +1211,12 @@ static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) usb_ep_fifo_flush(ep); /* Hold the lock while we update the request and buffer states */ + smp_wmb(); spin_lock(&fsg->lock); fsg->intreq_busy = 0; bh->state = BUF_STATE_EMPTY; - spin_unlock(&fsg->lock); wakeup_thread(fsg); + spin_unlock(&fsg->lock); } #else @@ -1264,8 +1267,8 @@ static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh) fsg->cbbuf_cmnd_size = req->actual; memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size); - spin_unlock(&fsg->lock); wakeup_thread(fsg); + spin_unlock(&fsg->lock); } #else @@ -1517,8 +1520,8 @@ static int fsg_setup(struct usb_gadget *gadget, /* Use this for bulk or interrupt transfers, not ep0 */ static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, - struct usb_request *req, volatile int *pbusy, - volatile enum fsg_buffer_state *state) + struct usb_request *req, int *pbusy, + enum fsg_buffer_state *state) { int rc; @@ -1526,8 +1529,11 @@ static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, dump_msg(fsg, "bulk-in", req->buf, req->length); else if (ep == fsg->intr_in) dump_msg(fsg, "intr-in", req->buf, req->length); + + spin_lock_irq(&fsg->lock); *pbusy = 1; *state = BUF_STATE_BUSY; + spin_unlock_irq(&fsg->lock); rc = usb_ep_queue(ep, req, GFP_KERNEL); if (rc != 0) { *pbusy = 0; @@ -1547,14 +1553,23 @@ static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, static int sleep_thread(struct fsg_dev *fsg) { - int rc; + int rc = 0; /* Wait until a signal arrives or we are woken up */ - rc = wait_event_interruptible(fsg->thread_wqh, - fsg->thread_wakeup_needed); + for (;;) { + try_to_freeze(); + set_current_state(TASK_INTERRUPTIBLE); + if (signal_pending(current)) { + rc = -EINTR; + break; + } + if (fsg->thread_wakeup_needed) + break; + schedule(); + } + __set_current_state(TASK_RUNNING); fsg->thread_wakeup_needed = 0; - try_to_freeze(); - return (rc ? -EINTR : 0); + return rc; } @@ -1791,6 +1806,7 @@ static int do_write(struct fsg_dev *fsg) if (bh->state == BUF_STATE_EMPTY && !get_some_more) break; // We stopped early if (bh->state == BUF_STATE_FULL) { + smp_rmb(); fsg->next_buffhd_to_drain = bh->next; bh->state = BUF_STATE_EMPTY; @@ -2359,6 +2375,7 @@ static int throw_away_data(struct fsg_dev *fsg) /* Throw away the data in a filled buffer */ if (bh->state == BUF_STATE_FULL) { + smp_rmb(); bh->state = BUF_STATE_EMPTY; fsg->next_buffhd_to_drain = bh->next; @@ -3024,6 +3041,7 @@ static int get_next_command(struct fsg_dev *fsg) if ((rc = sleep_thread(fsg)) != 0) return rc; } + smp_rmb(); rc = received_cbw(fsg, bh); bh->state = BUF_STATE_EMPTY; @@ -4072,7 +4090,6 @@ static int __init fsg_alloc(void) spin_lock_init(&fsg->lock); init_rwsem(&fsg->filesem); kref_init(&fsg->ref); - init_waitqueue_head(&fsg->thread_wqh); init_completion(&fsg->thread_notifier); the_fsg = fsg; -- cgit v1.2.3 From 3cf0a22e8b1b3f44288db773d315e72e89d51c4c Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 29 Nov 2005 12:08:15 -0500 Subject: [PATCH] USB Gadget: dummy_hcd: updates to hcd->state This patch (as613) moves the updates to hcd->state in the dummy_hcd driver to where they now belong. It also uses the new HC_FLAG_HW_ACCESSIBLE flag in a way that simulates a real PCI controller, and it adds checks for attempts to resume the bus while the controller is suspended or to suspend the controller while the bus is active. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/dummy_hcd.c | 43 ++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 4932b07b316d..ce0d4b412dfe 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -1576,7 +1576,7 @@ static int dummy_hub_status (struct usb_hcd *hcd, char *buf) dum = hcd_to_dummy (hcd); spin_lock_irqsave (&dum->lock, flags); - if (hcd->state != HC_STATE_RUNNING) + if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) goto done; if (dum->resuming && time_after_eq (jiffies, dum->re_timeout)) { @@ -1623,7 +1623,7 @@ static int dummy_hub_control ( int retval = 0; unsigned long flags; - if (hcd->state != HC_STATE_RUNNING) + if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) return -ETIMEDOUT; dum = hcd_to_dummy (hcd); @@ -1756,9 +1756,12 @@ static int dummy_bus_suspend (struct usb_hcd *hcd) { struct dummy *dum = hcd_to_dummy (hcd); + dev_dbg (&hcd->self.root_hub->dev, "%s\n", __FUNCTION__); + spin_lock_irq (&dum->lock); dum->rh_state = DUMMY_RH_SUSPENDED; set_link_state (dum); + hcd->state = HC_STATE_SUSPENDED; spin_unlock_irq (&dum->lock); return 0; } @@ -1766,14 +1769,23 @@ static int dummy_bus_suspend (struct usb_hcd *hcd) static int dummy_bus_resume (struct usb_hcd *hcd) { struct dummy *dum = hcd_to_dummy (hcd); + int rc = 0; + + dev_dbg (&hcd->self.root_hub->dev, "%s\n", __FUNCTION__); spin_lock_irq (&dum->lock); - dum->rh_state = DUMMY_RH_RUNNING; - set_link_state (dum); - if (!list_empty(&dum->urbp_list)) - mod_timer (&dum->timer, jiffies); + if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + dev_warn (&hcd->self.root_hub->dev, "HC isn't running!\n"); + rc = -ENODEV; + } else { + dum->rh_state = DUMMY_RH_RUNNING; + set_link_state (dum); + if (!list_empty(&dum->urbp_list)) + mod_timer (&dum->timer, jiffies); + hcd->state = HC_STATE_RUNNING; + } spin_unlock_irq (&dum->lock); - return 0; + return rc; } /*-------------------------------------------------------------------------*/ @@ -1933,12 +1945,19 @@ static int dummy_hcd_remove (struct platform_device *pdev) static int dummy_hcd_suspend (struct platform_device *pdev, pm_message_t state) { struct usb_hcd *hcd; + struct dummy *dum; + int rc = 0; dev_dbg (&pdev->dev, "%s\n", __FUNCTION__); - hcd = platform_get_drvdata (pdev); - hcd->state = HC_STATE_SUSPENDED; - return 0; + hcd = platform_get_drvdata (pdev); + dum = hcd_to_dummy (hcd); + if (dum->rh_state == DUMMY_RH_RUNNING) { + dev_warn(&pdev->dev, "Root hub isn't suspended!\n"); + rc = -EBUSY; + } else + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + return rc; } static int dummy_hcd_resume (struct platform_device *pdev) @@ -1946,9 +1965,9 @@ static int dummy_hcd_resume (struct platform_device *pdev) struct usb_hcd *hcd; dev_dbg (&pdev->dev, "%s\n", __FUNCTION__); - hcd = platform_get_drvdata (pdev); - hcd->state = HC_STATE_RUNNING; + hcd = platform_get_drvdata (pdev); + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); usb_hcd_poll_rh_status (hcd); return 0; } -- cgit v1.2.3 From 2425e9fe67cb5e66c173c4f604ddd8a5970d89e9 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 29 Nov 2005 12:13:31 -0500 Subject: [PATCH] USB: Don't assume root-hub resume succeeds This patch (as614) makes a small change to the part of the hub driver responsible for remote wakeup of root hubs. When these wakeups occur the driver is suspended, and in case the resume fails the driver should remain suspended -- it shouldn't try to proceed with its normal processing. This will hardly ever matter in normal use, but it did crop up while I was debugging a different problem. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a523c8f20b5d..650d5ee5871b 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2697,6 +2697,8 @@ static void hub_events(void) if (i) { dpm_runtime_resume(&hdev->dev); dpm_runtime_resume(&intf->dev); + usb_put_intf(intf); + continue; } /* Lock the device, then check to see if we were -- cgit v1.2.3 From 9fe6fcd8ccb2c8c661dfd1e07e3122aef31a67d4 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 29 Nov 2005 14:01:55 +0100 Subject: [PATCH] USB: drivers/usb/misc/sisusbvga/sisusb.c: remove dead code The Coverity checker found this dead code. Signed-off-by: Adrian Bunk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/sisusbvga/sisusb.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 44350d49ad0a..1ced113ccb50 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -863,9 +863,6 @@ static int sisusb_write_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr, switch (length) { - case 0: - return ret; - case 1: if (userbuffer) { if (get_user(swap8, (u8 __user *)userbuffer)) @@ -1221,9 +1218,6 @@ static int sisusb_read_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr, switch (length) { - case 0: - return ret; - case 1: ret |= sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM, -- cgit v1.2.3 From 4c4c9432a6c916729c7296c47fe93b053a73e20c Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Tue, 29 Nov 2005 09:43:42 +0100 Subject: [PATCH] USB: mark various usb tables const patch below marks various USB tables and variables as const so that they end up in .rodata section and don't cacheline share with things that get written to. For the non-array variables it also allows gcc to optimize more. Signed-off-by: Arjan van de Ven Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 4 ++-- drivers/usb/class/usblp.c | 4 ++-- drivers/usb/core/devices.c | 20 ++++++++++---------- drivers/usb/host/uhci-debug.c | 2 +- drivers/usb/input/aiptek.c | 2 +- drivers/usb/input/ati_remote.c | 4 ++-- drivers/usb/input/fixp-arith.h | 2 +- drivers/usb/input/hid-core.c | 2 +- drivers/usb/input/hid-input.c | 4 ++-- drivers/usb/input/keyspan_remote.c | 2 +- drivers/usb/input/xpad.c | 6 +++--- drivers/usb/media/konicawc.c | 6 +++--- drivers/usb/media/ov511.c | 2 +- drivers/usb/media/pwc/pwc-ctrl.c | 2 +- drivers/usb/media/stv680.h | 6 +++--- drivers/usb/media/usbvideo.c | 2 +- drivers/usb/misc/sisusbvga/sisusb.c | 4 ++-- drivers/usb/serial/ftdi_sio.c | 2 +- drivers/usb/serial/io_edgeport.c | 2 +- drivers/usb/serial/io_fw_boot2.h | 2 +- drivers/usb/serial/safe_serial.c | 2 +- drivers/usb/storage/sddr09.c | 2 +- drivers/usb/storage/usb.c | 2 +- 23 files changed, 43 insertions(+), 43 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 93de121f52a8..248279e44c99 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -658,7 +658,7 @@ static int acm_tty_ioctl(struct tty_struct *tty, struct file *file, unsigned int return -ENOIOCTLCMD; } -static __u32 acm_tty_speed[] = { +static const __u32 acm_tty_speed[] = { 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 500000, 576000, @@ -666,7 +666,7 @@ static __u32 acm_tty_speed[] = { 2500000, 3000000, 3500000, 4000000 }; -static __u8 acm_tty_size[] = { +static const __u8 acm_tty_size[] = { 5, 6, 7, 8 }; diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 10406b857ac7..6918037e209c 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -199,7 +199,7 @@ struct quirk_printer_struct { #define USBLP_QUIRK_BIDIR 0x1 /* reports bidir but requires unidirectional mode (no INs/reads) */ #define USBLP_QUIRK_USB_INIT 0x2 /* needs vendor USB init string */ -static struct quirk_printer_struct quirk_printers[] = { +static const struct quirk_printer_struct quirk_printers[] = { { 0x03f0, 0x0004, USBLP_QUIRK_BIDIR }, /* HP DeskJet 895C */ { 0x03f0, 0x0104, USBLP_QUIRK_BIDIR }, /* HP DeskJet 880C */ { 0x03f0, 0x0204, USBLP_QUIRK_BIDIR }, /* HP DeskJet 815C */ @@ -301,7 +301,7 @@ static void usblp_bulk_write(struct urb *urb, struct pt_regs *regs) * Get and print printer errors. */ -static char *usblp_messages[] = { "ok", "out of paper", "off-line", "on fire" }; +static const char *usblp_messages[] = { "ok", "out of paper", "off-line", "on fire" }; static int usblp_check_status(struct usblp *usblp, int err) { diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 55bc563a3256..2684e15b813b 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -67,45 +67,45 @@ /* Define ALLOW_SERIAL_NUMBER if you want to see the serial number of devices */ #define ALLOW_SERIAL_NUMBER -static char *format_topo = +static const char *format_topo = /* T: Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=ddd MxCh=dd */ "\nT: Bus=%2.2d Lev=%2.2d Prnt=%2.2d Port=%2.2d Cnt=%2.2d Dev#=%3d Spd=%3s MxCh=%2d\n"; -static char *format_string_manufacturer = +static const char *format_string_manufacturer = /* S: Manufacturer=xxxx */ "S: Manufacturer=%.100s\n"; -static char *format_string_product = +static const char *format_string_product = /* S: Product=xxxx */ "S: Product=%.100s\n"; #ifdef ALLOW_SERIAL_NUMBER -static char *format_string_serialnumber = +static const char *format_string_serialnumber = /* S: SerialNumber=xxxx */ "S: SerialNumber=%.100s\n"; #endif -static char *format_bandwidth = +static const char *format_bandwidth = /* B: Alloc=ddd/ddd us (xx%), #Int=ddd, #Iso=ddd */ "B: Alloc=%3d/%3d us (%2d%%), #Int=%3d, #Iso=%3d\n"; -static char *format_device1 = +static const char *format_device1 = /* D: Ver=xx.xx Cls=xx(sssss) Sub=xx Prot=xx MxPS=dd #Cfgs=dd */ "D: Ver=%2x.%02x Cls=%02x(%-5s) Sub=%02x Prot=%02x MxPS=%2d #Cfgs=%3d\n"; -static char *format_device2 = +static const char *format_device2 = /* P: Vendor=xxxx ProdID=xxxx Rev=xx.xx */ "P: Vendor=%04x ProdID=%04x Rev=%2x.%02x\n"; -static char *format_config = +static const char *format_config = /* C: #Ifs=dd Cfg#=dd Atr=xx MPwr=dddmA */ "C:%c #Ifs=%2d Cfg#=%2d Atr=%02x MxPwr=%3dmA\n"; -static char *format_iface = +static const char *format_iface = /* I: If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=xxxx*/ "I: If#=%2d Alt=%2d #EPs=%2d Cls=%02x(%-5s) Sub=%02x Prot=%02x Driver=%s\n"; -static char *format_endpt = +static const char *format_endpt = /* E: Ad=xx(s) Atr=xx(ssss) MxPS=dddd Ivl=D?s */ "E: Ad=%02x(%c) Atr=%02x(%-4s) MxPS=%4d Ivl=%d%cs\n"; diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index 151154df37fa..cab02e15bfee 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -197,7 +197,7 @@ out: } #ifdef CONFIG_PROC_FS -static const char *qh_names[] = { +static const char * const qh_names[] = { "skel_int128_qh", "skel_int64_qh", "skel_int32_qh", "skel_int16_qh", "skel_int8_qh", "skel_int4_qh", diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c index 356284c746a0..87ae08c99bc4 100644 --- a/drivers/usb/input/aiptek.c +++ b/drivers/usb/input/aiptek.c @@ -338,7 +338,7 @@ struct aiptek { * the bitmap which comes from the tablet. This hides the * issue that the F_keys are not sequentially numbered. */ -static int macroKeyEvents[] = { +static const int macroKeyEvents[] = { KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11, KEY_F12, KEY_F13, KEY_F14, KEY_F15, KEY_F16, KEY_F17, diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index 8948e5c3941f..b78a4d81b0a3 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -146,7 +146,7 @@ static char init1[] = { 0x01, 0x00, 0x20, 0x14 }; static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 }; /* Acceleration curve for directional control pad */ -static char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; +static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; /* Duplicate event filtering time. * Sequential, identical KIND_FILTERED inputs with less than @@ -197,7 +197,7 @@ struct ati_remote { #define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/ /* Translation table from hardware messages to input events. */ -static struct { +static const struct { short kind; unsigned char data1, data2; int type; diff --git a/drivers/usb/input/fixp-arith.h b/drivers/usb/input/fixp-arith.h index 26ca5b890a61..b44d398de071 100644 --- a/drivers/usb/input/fixp-arith.h +++ b/drivers/usb/input/fixp-arith.h @@ -38,7 +38,7 @@ typedef s16 fixp_t; #define FRAC_MASK ((1<lock is down */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 857fe791d702..11da073da178 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -491,7 +491,7 @@ static struct usb_driver ftdi_driver = { .no_dynamic_id = 1, }; -static char *ftdi_chip_name[] = { +static const char *ftdi_chip_name[] = { [SIO] = "SIO", /* the serial part of FT8U100AX */ [FT8U232AM] = "FT8U232AM", [FT232BM] = "FT232BM", diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 4e2b599d85a6..89bb3563c919 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -184,7 +184,7 @@ struct divisor_table_entry { // These assume a 3.6864MHz crystal, the standard /16, and // MCR.7 = 0. // -static struct divisor_table_entry divisor_table[] = { +static const struct divisor_table_entry divisor_table[] = { { 50, 4608}, { 75, 3072}, { 110, 2095}, /* 2094.545455 => 230450 => .0217 % over */ diff --git a/drivers/usb/serial/io_fw_boot2.h b/drivers/usb/serial/io_fw_boot2.h index c7c3a3c305fe..e3463de99de4 100644 --- a/drivers/usb/serial/io_fw_boot2.h +++ b/drivers/usb/serial/io_fw_boot2.h @@ -537,7 +537,7 @@ static unsigned char IMAGE_ARRAY_NAME[] = { }; -static struct edge_firmware_version_info IMAGE_VERSION_NAME = { +static const struct edge_firmware_version_info IMAGE_VERSION_NAME = { 2, 0, 3 }; // Major, Minor, Build #undef IMAGE_VERSION_NAME diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 3ea284ce7b8b..86dc21c728a5 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -167,7 +167,7 @@ static struct usb_driver safe_driver = { .no_dynamic_id = 1, }; -static __u16 crc10_table[256] = { +static const __u16 crc10_table[256] = { 0x000, 0x233, 0x255, 0x066, 0x299, 0x0aa, 0x0cc, 0x2ff, 0x301, 0x132, 0x154, 0x367, 0x198, 0x3ab, 0x3cd, 0x1fe, 0x031, 0x202, 0x264, 0x057, 0x2a8, 0x09b, 0x0fd, 0x2ce, 0x330, 0x103, 0x165, 0x356, 0x1a9, 0x39a, 0x3fc, 0x1cf, 0x062, 0x251, 0x237, 0x004, 0x2fb, 0x0c8, 0x0ae, 0x29d, 0x363, 0x150, 0x136, 0x305, 0x1fa, 0x3c9, 0x3af, 0x19c, diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index 0ea2f5ab66ba..0a6efae452fb 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -237,7 +237,7 @@ static void nand_store_ecc(unsigned char *data, unsigned char *ecc) { #define SPARE 0xfffffffe #define UNUSABLE 0xfffffffd -static int erase_bad_lba_entries = 0; +static const int erase_bad_lba_entries = 0; /* send vendor interface command (0x41) */ /* called for requests 0, 1, 8 */ diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 484ed297bed0..356f471ba83b 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -470,7 +470,7 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id) * from the unusual_devs.h table. */ if (id->idVendor || id->idProduct) { - static char *msgs[3] = { + static const char *msgs[3] = { "an unneeded SubClass entry", "an unneeded Protocol entry", "unneeded SubClass and Protocol entries"}; -- cgit v1.2.3 From a5e36d20897ff8317e722fceb4d9eea3e4a5906b Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 28 Nov 2005 22:15:46 +0000 Subject: [PATCH] USB: Correct ohci-pxa27x suspend/resume struct confusion The device data in ohci-pxa27x is a struct hcd, not a struct ohci_hcd. This correct the suspend/resume calls to account for this and adds some code to invalidate the platform data when the module is removed. Signed-off-by: Richard Purdie Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-pxa27x.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 3b1cfe939483..acde8868da21 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -309,20 +309,22 @@ static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_hcd_pxa27x_remove(hcd, pdev); + platform_set_drvdata(pdev, NULL); return 0; } #ifdef CONFIG_PM static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state) { - struct ohci_hcd *ohci = platform_get_drvdata(pdev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); if (time_before(jiffies, ohci->next_statechange)) msleep(5); ohci->next_statechange = jiffies; pxa27x_stop_hc(&pdev->dev); - ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED; + hcd->state = HC_STATE_SUSPENDED; pdev->dev.power.power_state = PMSG_SUSPEND; return 0; @@ -330,7 +332,8 @@ static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_ static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev) { - struct ohci_hcd *ohci = platform_get_drvdata(pdev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); int status; if (time_before(jiffies, ohci->next_statechange)) @@ -341,7 +344,7 @@ static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev) return status; pdev->dev.power.power_state = PMSG_ON; - usb_hcd_resume_root_hub(platform_get_drvdata(pdev)); + usb_hcd_resume_root_hub(hcd); return 0; } -- cgit v1.2.3 From 17fa6e552f2fc6bb06af767b0abf9cb642e13404 Mon Sep 17 00:00:00 2001 From: fabien COSSE Date: Wed, 30 Nov 2005 01:16:00 -0800 Subject: [PATCH] USB Storage: add unusual_devs entry for NIKON Coolpix 2000 This patch adds an unusual_devs.h entry for NIKON Coolpix 2000 camera wich cause error: "Not Ready: Medium not present" Works fine with th patched kernel... Here are the informations in /proc/bus/usb/devices: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04b0 ProdID=0301 Rev= 0.10 S: Manufacturer=NIKON S: Product=NIKON DSC E2000 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=16ms Signed-off-by: Fabien COSSE Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 76904ad11241..100f53c2097e 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -187,6 +187,14 @@ UNUSUAL_DEV( 0x04b0, 0x0405, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Patch for Nikon coolpix 2000 + * Submitted by Fabien Cosse */ +UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010, + "NIKON", + "NIKON DSC E2000", + US_SC_DEVICE, US_PR_DEVICE,NULL, + US_FL_NOT_LOCKABLE ), + /* BENQ DC5330 * Reported by Manuel Fombuena and * Frank Copeland */ -- cgit v1.2.3 From 95f209f93663103db2a8fb989e226ac68a98b036 Mon Sep 17 00:00:00 2001 From: Horst Schirmeier Date: Thu, 28 Jul 2005 15:32:20 +0200 Subject: [PATCH] USB: pl2303_update_line_status data length fix Minimum data length must be UART_STATE + 1, as data[UART_STATE] is being accessed for the new line_state. Although PL-2303 hardware is not expected to send data with exactly UART_STATE length, this keeps it on the safe side. Signed-off-by: Horst Schirmeier Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index c96ba9fc19e0..f03721056190 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -810,7 +810,7 @@ static void pl2303_update_line_status(struct usb_serial_port *port, struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; u8 status_idx = UART_STATE; - u8 length = UART_STATE; + u8 length = UART_STATE + 1; if ((le16_to_cpu(port->serial->dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) && (le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X65 || -- cgit v1.2.3 From f0b80fbf294bc4f6ec179b09fd5b63df25188259 Mon Sep 17 00:00:00 2001 From: Marcelo Feitoza Parisi Date: Thu, 1 Dec 2005 00:50:39 +0300 Subject: [PATCH] USB: ati_remote: use time_before() and friends They deal with wrapping correctly and are nicer to read. Signed-off-by: Marcelo Feitoza Parisi Signed-off-by: Alexey Dobriyan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/ati_remote.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index b78a4d81b0a3..f7bdc506e613 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -96,6 +96,7 @@ #include #include #include +#include /* * Module and Version Information, Module Parameters @@ -471,7 +472,7 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) /* Filter duplicate events which happen "too close" together. */ if ((ati_remote->old_data[0] == data[1]) && (ati_remote->old_data[1] == data[2]) && - ((ati_remote->old_jiffies + FILTER_TIME) > jiffies)) { + time_before(jiffies, ati_remote->old_jiffies + FILTER_TIME)) { ati_remote->repeat_count++; } else { ati_remote->repeat_count = 0; @@ -506,16 +507,16 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) * pad down, so we increase acceleration, ramping up over two seconds to * a maximum speed. The acceleration curve is #defined above. */ - if ((jiffies - ati_remote->old_jiffies) > (HZ >> 2)) { + if (time_after(jiffies, ati_remote->old_jiffies + (HZ >> 2))) { acc = 1; ati_remote->acc_jiffies = jiffies; } - else if ((jiffies - ati_remote->acc_jiffies) < (HZ >> 3)) acc = accel[0]; - else if ((jiffies - ati_remote->acc_jiffies) < (HZ >> 2)) acc = accel[1]; - else if ((jiffies - ati_remote->acc_jiffies) < (HZ >> 1)) acc = accel[2]; - else if ((jiffies - ati_remote->acc_jiffies) < HZ ) acc = accel[3]; - else if ((jiffies - ati_remote->acc_jiffies) < HZ+(HZ>>1)) acc = accel[4]; - else if ((jiffies - ati_remote->acc_jiffies) < (HZ << 1)) acc = accel[5]; + else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 3))) acc = accel[0]; + else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 2))) acc = accel[1]; + else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 1))) acc = accel[2]; + else if (time_before(jiffies, ati_remote->acc_jiffies + HZ)) acc = accel[3]; + else if (time_before(jiffies, ati_remote->acc_jiffies + HZ+(HZ>>1))) acc = accel[4]; + else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ << 1))) acc = accel[5]; else acc = accel[6]; input_regs(dev, regs); -- cgit v1.2.3 From fa3465689f93331834a831bbe98e3863701e1068 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 30 Nov 2005 11:57:51 -0500 Subject: [PATCH] USB: UHCI: change uhci_explen macro This patch (as616) changed the uhci_explen macro in uhci-hcd.h so that it now accepts the desired length, rather than length - 1 with special handling for 0. This also fixes a minor bug that would show up only when a driver submits a 0-length bulk URB. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-hcd.c | 2 +- drivers/usb/host/uhci-hcd.h | 8 ++++---- drivers/usb/host/uhci-q.c | 12 ++++++------ 3 files changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 071fab6b6475..120ca64fe3f7 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -566,7 +566,7 @@ static int uhci_start(struct usb_hcd *hcd) uhci->skel_bulk_qh->link = cpu_to_le32(uhci->skel_term_qh->dma_handle) | UHCI_PTR_QH; /* This dummy TD is to work around a bug in Intel PIIX controllers */ - uhci_fill_td(uhci->term_td, 0, (UHCI_NULL_DATA_SIZE << 21) | + uhci_fill_td(uhci->term_td, 0, uhci_explen(0) | (0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0); uhci->term_td->link = cpu_to_le32(uhci->term_td->dma_handle); diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index e576db57a926..e43282e4e806 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -71,8 +71,6 @@ #define USBLEGSUP_RWC 0x8f00 /* the R/WC bits */ #define USBLEGSUP_RO 0x5040 /* R/O and reserved bits */ -#define UHCI_NULL_DATA_SIZE 0x7FF /* for UHCI controller TD */ - #define UHCI_PTR_BITS cpu_to_le32(0x000F) #define UHCI_PTR_TERM cpu_to_le32(0x0001) #define UHCI_PTR_QH cpu_to_le32(0x0002) @@ -168,9 +166,11 @@ static __le32 inline qh_element(struct uhci_qh *qh) { #define TD_TOKEN_EXPLEN_MASK 0x7FF /* expected length, encoded as n - 1 */ #define TD_TOKEN_PID_MASK 0xFF -#define uhci_explen(len) ((len) << TD_TOKEN_EXPLEN_SHIFT) +#define uhci_explen(len) ((((len) - 1) & TD_TOKEN_EXPLEN_MASK) << \ + TD_TOKEN_EXPLEN_SHIFT) -#define uhci_expected_length(token) ((((token) >> 21) + 1) & TD_TOKEN_EXPLEN_MASK) +#define uhci_expected_length(token) ((((token) >> TD_TOKEN_EXPLEN_SHIFT) + \ + 1) & TD_TOKEN_EXPLEN_MASK) #define uhci_toggle(token) (((token) >> TD_TOKEN_TOGGLE_SHIFT) & 1) #define uhci_endpoint(token) (((token) >> 15) & 0xf) #define uhci_devaddr(token) (((token) >> TD_TOKEN_DEVADDR_SHIFT) & 0x7f) diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 7e46887d9e12..ace9d15f85d2 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -596,7 +596,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, struct ur return -ENOMEM; uhci_add_td_to_urb(urb, td); - uhci_fill_td(td, status, destination | uhci_explen(7), + uhci_fill_td(td, status, destination | uhci_explen(8), urb->setup_dma); /* @@ -628,7 +628,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, struct ur destination ^= TD_TOKEN_TOGGLE; uhci_add_td_to_urb(urb, td); - uhci_fill_td(td, status, destination | uhci_explen(pktsze - 1), + uhci_fill_td(td, status, destination | uhci_explen(pktsze), data); data += pktsze; @@ -658,7 +658,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, struct ur uhci_add_td_to_urb(urb, td); uhci_fill_td(td, status | TD_CTRL_IOC, - destination | uhci_explen(UHCI_NULL_DATA_SIZE), 0); + destination | uhci_explen(0), 0); qh = uhci_alloc_qh(uhci); if (!qh) @@ -864,7 +864,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, struct urb return -ENOMEM; uhci_add_td_to_urb(urb, td); - uhci_fill_td(td, status, destination | uhci_explen(pktsze - 1) | + uhci_fill_td(td, status, destination | uhci_explen(pktsze) | (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT), data); @@ -890,7 +890,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, struct urb return -ENOMEM; uhci_add_td_to_urb(urb, td); - uhci_fill_td(td, status, destination | uhci_explen(UHCI_NULL_DATA_SIZE) | + uhci_fill_td(td, status, destination | uhci_explen(0) | (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT), data); @@ -1092,7 +1092,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb) return -ENOMEM; uhci_add_td_to_urb(urb, td); - uhci_fill_td(td, status, destination | uhci_explen(urb->iso_frame_desc[i].length - 1), + uhci_fill_td(td, status, destination | uhci_explen(urb->iso_frame_desc[i].length), urb->transfer_dma + urb->iso_frame_desc[i].offset); if (i + 1 >= urb->number_of_packets) -- cgit v1.2.3 From 687f5f3428157bea4940dd967fd7b4e59c1b13b4 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 30 Nov 2005 17:16:19 -0500 Subject: [PATCH] USB: UHCI: edit some comments This patch (as615b) edits a large number of comments in the uhci-hcd code, mainly removing excess apostrophes. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-debug.c | 12 ++++++------ drivers/usb/host/uhci-hcd.c | 17 +++++++++-------- drivers/usb/host/uhci-hcd.h | 24 ++++++++++++------------ drivers/usb/host/uhci-q.c | 18 +++++++++--------- 4 files changed, 36 insertions(+), 35 deletions(-) diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index cab02e15bfee..5832953086f8 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -2,8 +2,8 @@ * UHCI-specific debugging code. Invaluable when something * goes wrong, but don't get in my face. * - * Kernel visible pointers are surrounded in []'s and bus - * visible pointers are surrounded in ()'s + * Kernel visible pointers are surrounded in []s and bus + * visible pointers are surrounded in ()s * * (C) Copyright 1999 Linus Torvalds * (C) Copyright 1999-2001 Johannes Erdfelt @@ -19,7 +19,7 @@ static struct dentry *uhci_debugfs_root = NULL; -/* Handle REALLY large printk's so we don't overflow buffers */ +/* Handle REALLY large printks so we don't overflow buffers */ static inline void lprintk(char *buf) { char *p; @@ -160,7 +160,7 @@ static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space) } if (active && ni > i) { - out += sprintf(out, "%*s[skipped %d active TD's]\n", space, "", ni - i); + out += sprintf(out, "%*s[skipped %d active TDs]\n", space, "", ni - i); tmp = ntmp; td = ntd; i = ni; @@ -173,7 +173,7 @@ static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space) if (list_empty(&urbp->queue_list) || urbp->queued) goto out; - out += sprintf(out, "%*sQueued QH's:\n", -space, "--"); + out += sprintf(out, "%*sQueued QHs:\n", -space, "--"); head = &urbp->queue_list; tmp = head->next; @@ -464,7 +464,7 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) } while (tmp != head); } - out += sprintf(out, "Skeleton QH's\n"); + out += sprintf(out, "Skeleton QHs\n"); for (i = 0; i < UHCI_NUM_SKELQH; ++i) { int shown = 0; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 120ca64fe3f7..dfe121d35887 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -62,10 +62,10 @@ Alan Stern" /* * debug = 0, no debugging messages - * debug = 1, dump failed URB's except for stalls - * debug = 2, dump all failed URB's (including stalls) + * debug = 1, dump failed URBs except for stalls + * debug = 2, dump all failed URBs (including stalls) * show all queues in /debug/uhci/[pci_addr] - * debug = 3, show all TD's in URB's when dumping + * debug = 3, show all TDs in URBs when dumping */ #ifdef DEBUG static int debug = 1; @@ -88,7 +88,7 @@ static void uhci_get_current_frame_number(struct uhci_hcd *uhci); #define FSBR_DELAY msecs_to_jiffies(50) /* When we timeout an idle transfer for FSBR, we'll switch it over to */ -/* depth first traversal. We'll do it in groups of this number of TD's */ +/* depth first traversal. We'll do it in groups of this number of TDs */ /* to make sure it doesn't hog all of the bandwidth */ #define DEPTH_INTERVAL 5 @@ -728,8 +728,9 @@ static int uhci_resume(struct usb_hcd *hcd) dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__); - /* We aren't in D3 state anymore, we do that even if dead as I - * really don't want to keep a stale HCD_FLAG_HW_ACCESSIBLE=0 + /* Since we aren't in D3 any more, it's safe to set this flag + * even if the controller was dead. It might not even be dead + * any more, if the firmware or quirks code has reset it. */ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); mb(); @@ -879,7 +880,7 @@ static int __init uhci_hcd_init(void) init_failed: if (kmem_cache_destroy(uhci_up_cachep)) - warn("not all urb_priv's were freed!"); + warn("not all urb_privs were freed!"); up_failed: debugfs_remove(uhci_debugfs_root); @@ -897,7 +898,7 @@ static void __exit uhci_hcd_cleanup(void) pci_unregister_driver(&uhci_pci_driver); if (kmem_cache_destroy(uhci_up_cachep)) - warn("not all urb_priv's were freed!"); + warn("not all urb_privs were freed!"); debugfs_remove(uhci_debugfs_root); kfree(errbuf); diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index e43282e4e806..8b4b887a7d41 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -223,10 +223,10 @@ static u32 inline td_status(struct uhci_td *td) { */ /* - * The UHCI driver places Interrupt, Control and Bulk into QH's both - * to group together TD's for one transfer, and also to faciliate queuing - * of URB's. To make it easy to insert entries into the schedule, we have - * a skeleton of QH's for each predefined Interrupt latency, low-speed + * The UHCI driver places Interrupt, Control and Bulk into QHs both + * to group together TDs for one transfer, and also to facilitate queuing + * of URBs. To make it easy to insert entries into the schedule, we have + * a skeleton of QHs for each predefined Interrupt latency, low-speed * control, full-speed control and terminating QH (see explanation for * the terminating QH below). * @@ -257,8 +257,8 @@ static u32 inline td_status(struct uhci_td *td) { * reclamation. * * Isochronous transfers are stored before the start of the skeleton - * schedule and don't use QH's. While the UHCI spec doesn't forbid the - * use of QH's for Isochronous, it doesn't use them either. And the spec + * schedule and don't use QHs. While the UHCI spec doesn't forbid the + * use of QHs for Isochronous, it doesn't use them either. And the spec * says that queues never advance on an error completion status, which * makes them totally unsuitable for Isochronous transfers. */ @@ -359,7 +359,7 @@ struct uhci_hcd { struct dma_pool *td_pool; struct uhci_td *term_td; /* Terminating TD, see UHCI bug */ - struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QH's */ + struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QHs */ spinlock_t lock; @@ -389,22 +389,22 @@ struct uhci_hcd { unsigned long resuming_ports; unsigned long ports_timeout; /* Time to stop signalling */ - /* Main list of URB's currently controlled by this HC */ + /* Main list of URBs currently controlled by this HC */ struct list_head urb_list; - /* List of QH's that are done, but waiting to be unlinked (race) */ + /* List of QHs that are done, but waiting to be unlinked (race) */ struct list_head qh_remove_list; unsigned int qh_remove_age; /* Age in frames */ - /* List of TD's that are done, but waiting to be freed (race) */ + /* List of TDs that are done, but waiting to be freed (race) */ struct list_head td_remove_list; unsigned int td_remove_age; /* Age in frames */ - /* List of asynchronously unlinked URB's */ + /* List of asynchronously unlinked URBs */ struct list_head urb_remove_list; unsigned int urb_remove_age; /* Age in frames */ - /* List of URB's awaiting completion callback */ + /* List of URBs awaiting completion callback */ struct list_head complete_list; int rh_numports; /* Number of root-hub ports */ diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index ace9d15f85d2..b6076004a437 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -80,7 +80,7 @@ static inline void uhci_fill_td(struct uhci_td *td, u32 status, } /* - * We insert Isochronous URB's directly into the frame list at the beginning + * We insert Isochronous URBs directly into the frame list at the beginning */ static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td, unsigned framenum) { @@ -369,7 +369,7 @@ static void uhci_append_queued_urb(struct uhci_hcd *uhci, struct urb *eurb, stru uhci_fixup_toggle(urb, uhci_toggle(td_token(lltd)) ^ 1)); - /* All qh's in the queue need to link to the next queue */ + /* All qhs in the queue need to link to the next queue */ urbp->qh->link = eurbp->qh->link; wmb(); /* Make sure we flush everything */ @@ -502,7 +502,7 @@ static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb) } /* Check to see if the remove list is empty. Set the IOC bit */ - /* to force an interrupt so we can remove the TD's*/ + /* to force an interrupt so we can remove the TDs*/ if (list_empty(&uhci->td_remove_list)) uhci_set_next_interrupt(uhci); @@ -612,7 +612,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, struct ur } /* - * Build the DATA TD's + * Build the DATA TDs */ while (len > 0) { int pktsze = len; @@ -744,7 +744,7 @@ static int uhci_result_control(struct uhci_hcd *uhci, struct urb *urb) urb->actual_length = 0; - /* The rest of the TD's (but the last) are data */ + /* The rest of the TDs (but the last) are data */ tmp = tmp->next; while (tmp != head && tmp->next != head) { unsigned int ctrlstat; @@ -848,7 +848,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, struct urb status |= TD_CTRL_SPD; /* - * Build the DATA TD's + * Build the DATA TDs */ do { /* Allow zero length packets */ int pktsze = maxsze; @@ -1025,7 +1025,7 @@ static int isochronous_find_limits(struct uhci_hcd *uhci, struct urb *urb, unsig list_for_each_entry(up, &uhci->urb_list, urb_list) { struct urb *u = up->urb; - /* look for pending URB's with identical pipe handle */ + /* look for pending URBs with identical pipe handle */ if ((urb->pipe == u->pipe) && (urb->dev == u->dev) && (u->status == -EINPROGRESS) && (u != urb)) { if (!last_urb) @@ -1355,7 +1355,7 @@ static void uhci_unlink_generic(struct uhci_hcd *uhci, struct urb *urb) uhci_delete_queued_urb(uhci, urb); - /* The interrupt loop will reclaim the QH's */ + /* The interrupt loop will reclaim the QHs */ uhci_remove_qh(uhci, urbp->qh); urbp->qh = NULL; } @@ -1413,7 +1413,7 @@ static int uhci_fsbr_timeout(struct uhci_hcd *uhci, struct urb *urb) list_for_each_entry(td, head, list) { /* * Make sure we don't do the last one (since it'll have the - * TERM bit set) as well as we skip every so many TD's to + * TERM bit set) as well as we skip every so many TDs to * make sure it doesn't hog the bandwidth */ if (td->list.next != head && (count % DEPTH_INTERVAL) == -- cgit v1.2.3 From b9b09422570e5e35a9f590a1ead63e711aefac8c Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Sat, 3 Dec 2005 21:52:10 -0800 Subject: [PATCH] USB: Let usbmon collect less garbage Alan Stern pointed out that (in 2.6 kernel) one successful submission results in one callback, even for ISO-out transfers. Thus, the silly check can be removed from usbmon. This reduces the amount of garbage printed in case of ISO and Interrupt transfers. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/usb/mon/mon_text.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c index 17d0190ef64e..611612146ae9 100644 --- a/drivers/usb/mon/mon_text.c +++ b/drivers/usb/mon/mon_text.c @@ -97,19 +97,12 @@ static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb, if (len >= DATA_MAX) len = DATA_MAX; - /* - * Bulk is easy to shortcut reliably. - * XXX Other pipe types need consideration. Currently, we overdo it - * and collect garbage for them: better more than less. - */ - if (usb_pipebulk(pipe) || usb_pipecontrol(pipe)) { - if (usb_pipein(pipe)) { - if (ev_type == 'S') - return '<'; - } else { - if (ev_type == 'C') - return '>'; - } + if (usb_pipein(pipe)) { + if (ev_type == 'S') + return '<'; + } else { + if (ev_type == 'C') + return '>'; } /* -- cgit v1.2.3 From 7931e1c6f8007d5fef8a0bb2dc71bd97315eeae9 Mon Sep 17 00:00:00 2001 From: Matthew Dharm Date: Sun, 4 Dec 2005 21:56:51 -0800 Subject: [PATCH] USB Storage: make OneTouch PM-aware The OneTouch subdriver submits its own interrupt URB for notifications about button presses. Consequently it needs to know about suspend and resume events, so it can cancel or restart the URB. This patch (as593) adds a hook to struct us_data, to be used for notifying subdrivers about Power Management events, and it implements the hook in the OneTouch driver. Signed-off-by: Alan Stern Signed-off-by: Nick Sillik Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/onetouch.c | 27 +++++++++++++++++++++++++++ drivers/usb/storage/usb.c | 4 ++++ drivers/usb/storage/usb.h | 9 ++++++++- 3 files changed, 39 insertions(+), 1 deletion(-) diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 89401a59f952..55ee2d36d585 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -52,6 +52,7 @@ struct usb_onetouch { struct urb *irq; /* urb for interrupt in report */ unsigned char *data; /* input data */ dma_addr_t data_dma; + unsigned int is_open:1; }; static void usb_onetouch_irq(struct urb *urb, struct pt_regs *regs) @@ -89,6 +90,7 @@ static int usb_onetouch_open(struct input_dev *dev) { struct usb_onetouch *onetouch = dev->private; + onetouch->is_open = 1; onetouch->irq->dev = onetouch->udev; if (usb_submit_urb(onetouch->irq, GFP_KERNEL)) { err("usb_submit_urb failed"); @@ -103,8 +105,30 @@ static void usb_onetouch_close(struct input_dev *dev) struct usb_onetouch *onetouch = dev->private; usb_kill_urb(onetouch->irq); + onetouch->is_open = 0; } +#ifdef CONFIG_PM +static void usb_onetouch_pm_hook(struct us_data *us, int action) +{ + struct usb_onetouch *onetouch = (struct usb_onetouch *) us->extra; + + if (onetouch->is_open) { + switch (action) { + case US_SUSPEND: + usb_kill_urb(onetouch->irq); + break; + case US_RESUME: + if (usb_submit_urb(onetouch->irq, GFP_KERNEL) != 0) + err("usb_submit_urb failed"); + break; + default: + break; + } + } +} +#endif /* CONFIG_PM */ + int onetouch_connect_input(struct us_data *ss) { struct usb_device *udev = ss->pusb_dev; @@ -185,6 +209,9 @@ int onetouch_connect_input(struct us_data *ss) ss->extra_destructor = onetouch_release_input; ss->extra = onetouch; +#ifdef CONFIG_PM + ss->suspend_resume_hook = usb_onetouch_pm_hook; +#endif input_register_device(onetouch->dev); diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 356f471ba83b..ca02ae97be86 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -188,6 +188,8 @@ static int storage_suspend(struct usb_interface *iface, pm_message_t message) down(&us->dev_semaphore); US_DEBUGP("%s\n", __FUNCTION__); + if (us->suspend_resume_hook) + (us->suspend_resume_hook)(us, US_SUSPEND); iface->dev.power.power_state.event = message.event; /* When runtime PM is working, we'll set a flag to indicate @@ -204,6 +206,8 @@ static int storage_resume(struct usb_interface *iface) down(&us->dev_semaphore); US_DEBUGP("%s\n", __FUNCTION__); + if (us->suspend_resume_hook) + (us->suspend_resume_hook)(us, US_RESUME); iface->dev.power.power_state.event = PM_EVENT_ON; up(&us->dev_semaphore); diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 0cd1eebc4497..7259fd1f6b0d 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -93,7 +93,11 @@ struct us_unusual_dev { typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*); typedef int (*trans_reset)(struct us_data*); typedef void (*proto_cmnd)(struct scsi_cmnd*, struct us_data*); -typedef void (*extra_data_destructor)(void *); /* extra data destructor */ +typedef void (*extra_data_destructor)(void *); /* extra data destructor */ +typedef void (*pm_hook)(struct us_data *, int); /* power management hook */ + +#define US_SUSPEND 0 +#define US_RESUME 1 /* we allocate one of these for every device that we remember */ struct us_data { @@ -149,6 +153,9 @@ struct us_data { /* subdriver information */ void *extra; /* Any extra data */ extra_data_destructor extra_destructor;/* extra data destructor */ +#ifdef CONFIG_PM + pm_hook suspend_resume_hook; +#endif }; /* Convert between us_data and the corresponding Scsi_Host */ -- cgit v1.2.3 From f5b8cb9c91f2f7d54dc3f066db8d4e0f041de79b Mon Sep 17 00:00:00 2001 From: Matthew Dharm Date: Sun, 4 Dec 2005 21:57:51 -0800 Subject: [PATCH] USB Storage: cleanups of sddr09 This is the first of three patches to prepare the sddr09 subdriver for conversion to the Sim-SCSI framework. This patch (as594) straightens out the initialization procedures and headers: Some ugly code from usb.c was moved into sddr09.c. Set-up of the private data structures was moved into the initialization routine. The connection between the "dpcm" version and the standalone version was clarified. A private declaration was moved from a header file into the subdriver's .c file. Signed-off-by: Alan Stern Acked-by: Andries Brouwer Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/initializers.h | 4 --- drivers/usb/storage/sddr09.c | 72 +++++++++++++++++++++++++++++--------- drivers/usb/storage/sddr09.h | 15 ++------ drivers/usb/storage/unusual_devs.h | 14 ++++---- drivers/usb/storage/usb.c | 22 ------------ 5 files changed, 64 insertions(+), 63 deletions(-) diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h index 7372386f33d5..4c1b2bd2e2e4 100644 --- a/drivers/usb/storage/initializers.h +++ b/drivers/usb/storage/initializers.h @@ -45,10 +45,6 @@ * mode */ int usb_stor_euscsi_init(struct us_data *us); -#ifdef CONFIG_USB_STORAGE_SDDR09 -int sddr09_init(struct us_data *us); -#endif - /* This function is required to activate all four slots on the UCR-61S2B * flash reader */ int usb_stor_ucr61s2b_init(struct us_data *us); diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index 0a6efae452fb..6c379b6b43d1 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -214,6 +214,20 @@ static void nand_store_ecc(unsigned char *data, unsigned char *ecc) { * The actual driver starts here. */ +struct sddr09_card_info { + unsigned long capacity; /* Size of card in bytes */ + int pagesize; /* Size of page in bytes */ + int pageshift; /* log2 of pagesize */ + int blocksize; /* Size of block in pages */ + int blockshift; /* log2 of blocksize */ + int blockmask; /* 2^blockshift - 1 */ + int *lba_to_pba; /* logical to physical map */ + int *pba_to_lba; /* physical to logical map */ + int lbact; /* number of available pages */ + int flags; +#define SDDR09_WP 1 /* write protected */ +}; + /* * On my 16MB card, control blocks have size 64 (16 real control bytes, * and 48 junk bytes). In reality of course the card uses 16 control bytes, @@ -1342,27 +1356,51 @@ sddr09_card_info_destructor(void *extra) { kfree(info->pba_to_lba); } -static void -sddr09_init_card_info(struct us_data *us) { - if (!us->extra) { - us->extra = kmalloc(sizeof(struct sddr09_card_info), GFP_NOIO); - if (us->extra) { - memset(us->extra, 0, sizeof(struct sddr09_card_info)); - us->extra_destructor = sddr09_card_info_destructor; - } +static int +sddr09_common_init(struct us_data *us) { + int result; + + /* set the configuration -- STALL is an acceptable response here */ + if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) { + US_DEBUGP("active config #%d != 1 ??\n", us->pusb_dev + ->actconfig->desc.bConfigurationValue); + return -EINVAL; + } + + result = usb_reset_configuration(us->pusb_dev); + US_DEBUGP("Result of usb_reset_configuration is %d\n", result); + if (result == -EPIPE) { + US_DEBUGP("-- stall on control interface\n"); + } else if (result != 0) { + /* it's not a stall, but another error -- time to bail */ + US_DEBUGP("-- Unknown error. Rejecting device\n"); + return -EINVAL; } + + us->extra = kzalloc(sizeof(struct sddr09_card_info), GFP_NOIO); + if (!us->extra) + return -ENOMEM; + us->extra_destructor = sddr09_card_info_destructor; + + nand_init_ecc(); + return 0; } + /* * This is needed at a very early stage. If this is not listed in the * unusual devices list but called from here then LUN 0 of the combo reader * is not recognized. But I do not know what precisely these calls do. */ int -sddr09_init(struct us_data *us) { +usb_stor_sddr09_dpcm_init(struct us_data *us) { int result; unsigned char *data = us->iobuf; + result = sddr09_common_init(us); + if (result) + return result; + result = sddr09_send_command(us, 0x01, USB_DIR_IN, data, 2); if (result != USB_STOR_TRANSPORT_GOOD) { US_DEBUGP("sddr09_init: send_command fails\n"); @@ -1398,7 +1436,7 @@ sddr09_init(struct us_data *us) { // test unit ready - return USB_STOR_TRANSPORT_GOOD; /* not result */ + return 0; /* not result */ } /* @@ -1427,13 +1465,6 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) }; info = (struct sddr09_card_info *)us->extra; - if (!info) { - nand_init_ecc(); - sddr09_init_card_info(us); - info = (struct sddr09_card_info *)us->extra; - if (!info) - return USB_STOR_TRANSPORT_ERROR; - } if (srb->cmnd[0] == REQUEST_SENSE && havefakesense) { /* for a faked command, we have to follow with a faked sense */ @@ -1606,3 +1637,10 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_GOOD; } +/* + * Initialization routine for the sddr09 subdriver + */ +int +usb_stor_sddr09_init(struct us_data *us) { + return sddr09_common_init(us); +} diff --git a/drivers/usb/storage/sddr09.h b/drivers/usb/storage/sddr09.h index c9d78d6188b1..c03089a9ec38 100644 --- a/drivers/usb/storage/sddr09.h +++ b/drivers/usb/storage/sddr09.h @@ -31,18 +31,7 @@ extern int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us); -struct sddr09_card_info { - unsigned long capacity; /* Size of card in bytes */ - int pagesize; /* Size of page in bytes */ - int pageshift; /* log2 of pagesize */ - int blocksize; /* Size of block in pages */ - int blockshift; /* log2 of blocksize */ - int blockmask; /* 2^blockshift - 1 */ - int *lba_to_pba; /* logical to physical map */ - int *pba_to_lba; /* physical to logical map */ - int lbact; /* number of available pages */ - int flags; -#define SDDR09_WP 1 /* write protected */ -}; +extern int usb_stor_sddr09_dpcm_init(struct us_data *us); +extern int usb_stor_sddr09_init(struct us_data *us); #endif diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 100f53c2097e..be3c06d17533 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -284,14 +284,14 @@ UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100, UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999, "Sandisk", "ImageMate SDDR09", - US_SC_SCSI, US_PR_EUSB_SDDR09, NULL, - US_FL_SINGLE_LUN ), + US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, + 0), /* This entry is from Andries.Brouwer@cwi.nl */ UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208, "SCM Microsystems", "eUSB SmartMedia / CompactFlash Adapter", - US_SC_SCSI, US_PR_DPCM_USB, sddr09_init, + US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init, 0), #endif @@ -681,8 +681,8 @@ UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100, UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100, "Olympus", "Camedia MAUSB-2", - US_SC_SCSI, US_PR_EUSB_SDDR09, NULL, - US_FL_SINGLE_LUN ), + US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, + 0), #endif /* Reported by Darsen Lu */ @@ -747,8 +747,8 @@ UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100, UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999, "Sandisk", "ImageMate SDDR-09", - US_SC_SCSI, US_PR_EUSB_SDDR09, NULL, - US_FL_SINGLE_LUN ), + US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, + 0), #endif #ifdef CONFIG_USB_STORAGE_FREECOM diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index ca02ae97be86..85c8c17b3c0c 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -919,28 +919,6 @@ static int storage_probe(struct usb_interface *intf, */ get_device_info(us, id); -#ifdef CONFIG_USB_STORAGE_SDDR09 - if (us->protocol == US_PR_EUSB_SDDR09 || - us->protocol == US_PR_DPCM_USB) { - /* set the configuration -- STALL is an acceptable response here */ - if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) { - US_DEBUGP("active config #%d != 1 ??\n", us->pusb_dev - ->actconfig->desc.bConfigurationValue); - goto BadDevice; - } - result = usb_reset_configuration(us->pusb_dev); - - US_DEBUGP("Result of usb_reset_configuration is %d\n", result); - if (result == -EPIPE) { - US_DEBUGP("-- stall on control interface\n"); - } else if (result != 0) { - /* it's not a stall, but another error -- time to bail */ - US_DEBUGP("-- Unknown error. Rejecting device\n"); - goto BadDevice; - } - } -#endif - /* Get the transport, protocol, and pipe settings */ result = get_transport(us); if (result) -- cgit v1.2.3 From 0dc08a357538de3d93305fbf99348663abdbf2cd Mon Sep 17 00:00:00 2001 From: Matthew Dharm Date: Sun, 4 Dec 2005 21:58:52 -0800 Subject: [PATCH] USB Storage: sddr09 cleanups This is the second of three patches to prepare the sddr09 subdriver for conversion to the Sim-SCSI framework. This patch (as595) updates the code to use standard error values for return codes instead of our special-purpose USB_STOR_TRANSPORT_... codes. The reverse update is then needed in the transport routine, but with the Sim-SCSI framework that routine will go away. Signed-off-by: Alan Stern Acked-by: Andries Brouwer Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/sddr09.c | 103 +++++++++++++++++++++---------------------- 1 file changed, 50 insertions(+), 53 deletions(-) diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index 6c379b6b43d1..760fe9362b6d 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -274,8 +274,11 @@ sddr09_send_command(struct us_data *us, rc = usb_stor_ctrl_transfer(us, pipe, request, requesttype, 0, 0, xfer_data, xfer_len); - return (rc == USB_STOR_XFER_GOOD ? USB_STOR_TRANSPORT_GOOD : - USB_STOR_TRANSPORT_ERROR); + switch (rc) { + case USB_STOR_XFER_GOOD: return 0; + case USB_STOR_XFER_STALLED: return -EPIPE; + default: return -EIO; + } } static int @@ -322,20 +325,12 @@ sddr09_request_sense(struct us_data *us, unsigned char *sensebuf, int buflen) { command[4] = buflen; result = sddr09_send_scsi_command(us, command, 12); - if (result != USB_STOR_TRANSPORT_GOOD) { - US_DEBUGP("request sense failed\n"); + if (result) return result; - } result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, sensebuf, buflen, NULL); - if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("request sense bulk in failed\n"); - return USB_STOR_TRANSPORT_ERROR; - } else { - US_DEBUGP("request sense worked\n"); - return USB_STOR_TRANSPORT_GOOD; - } + return (result == USB_STOR_XFER_GOOD ? 0 : -EIO); } /* @@ -383,7 +378,7 @@ sddr09_readX(struct us_data *us, int x, unsigned long fromaddress, result = sddr09_send_scsi_command(us, command, 12); - if (result != USB_STOR_TRANSPORT_GOOD) { + if (result) { US_DEBUGP("Result for send_control in sddr09_read2%d %d\n", x, result); return result; @@ -395,9 +390,9 @@ sddr09_readX(struct us_data *us, int x, unsigned long fromaddress, if (result != USB_STOR_XFER_GOOD) { US_DEBUGP("Result for bulk_transfer in sddr09_read2%d %d\n", x, result); - return USB_STOR_TRANSPORT_ERROR; + return -EIO; } - return USB_STOR_TRANSPORT_GOOD; + return 0; } /* @@ -511,7 +506,7 @@ sddr09_erase(struct us_data *us, unsigned long Eaddress) { result = sddr09_send_scsi_command(us, command, 12); - if (result != USB_STOR_TRANSPORT_GOOD) + if (result) US_DEBUGP("Result for send_control in sddr09_erase %d\n", result); @@ -569,7 +564,7 @@ sddr09_writeX(struct us_data *us, result = sddr09_send_scsi_command(us, command, 12); - if (result != USB_STOR_TRANSPORT_GOOD) { + if (result) { US_DEBUGP("Result for send_control in sddr09_writeX %d\n", result); return result; @@ -581,9 +576,9 @@ sddr09_writeX(struct us_data *us, if (result != USB_STOR_XFER_GOOD) { US_DEBUGP("Result for bulk_transfer in sddr09_writeX %d\n", result); - return USB_STOR_TRANSPORT_ERROR; + return -EIO; } - return USB_STOR_TRANSPORT_GOOD; + return 0; } /* erase address, write same address */ @@ -647,7 +642,7 @@ sddr09_read_sg_test_only(struct us_data *us) { result = sddr09_send_scsi_command(us, command, 4*nsg+3); - if (result != USB_STOR_TRANSPORT_GOOD) { + if (result) { US_DEBUGP("Result for send_control in sddr09_read_sg %d\n", result); return result; @@ -655,7 +650,7 @@ sddr09_read_sg_test_only(struct us_data *us) { buf = (unsigned char *) kmalloc(bulklen, GFP_NOIO); if (!buf) - return USB_STOR_TRANSPORT_ERROR; + return -ENOMEM; result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, buf, bulklen, NULL); @@ -663,10 +658,10 @@ sddr09_read_sg_test_only(struct us_data *us) { if (result != USB_STOR_XFER_GOOD) { US_DEBUGP("Result for bulk_transfer in sddr09_read_sg %d\n", result); - return USB_STOR_TRANSPORT_ERROR; + return -EIO; } - return USB_STOR_TRANSPORT_GOOD; + return 0; } #endif @@ -695,14 +690,13 @@ sddr09_read_status(struct us_data *us, unsigned char *status) { command[1] = LUNBITS; result = sddr09_send_scsi_command(us, command, 12); - if (result != USB_STOR_TRANSPORT_GOOD) + if (result) return result; result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, data, 64, NULL); *status = data[0]; - return (result == USB_STOR_XFER_GOOD ? - USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); + return (result == USB_STOR_XFER_GOOD ? 0 : -EIO); } static int @@ -725,7 +719,7 @@ sddr09_read_data(struct us_data *us, buffer = kmalloc(len, GFP_NOIO); if (buffer == NULL) { printk("sddr09_read_data: Out of memory\n"); - return USB_STOR_TRANSPORT_ERROR; + return -ENOMEM; } // Figure out the initial LBA and page @@ -736,7 +730,7 @@ sddr09_read_data(struct us_data *us, // This could be made much more efficient by checking for // contiguous LBA's. Another exercise left to the student. - result = USB_STOR_TRANSPORT_GOOD; + result = 0; index = offset = 0; while (sectors > 0) { @@ -749,7 +743,7 @@ sddr09_read_data(struct us_data *us, if (lba >= maxlba) { US_DEBUGP("Error: Requested lba %u exceeds " "maximum %u\n", lba, maxlba); - result = USB_STOR_TRANSPORT_ERROR; + result = -EIO; break; } @@ -763,7 +757,7 @@ sddr09_read_data(struct us_data *us, /* This is not really an error. It just means that the block has never been written. - Instead of returning USB_STOR_TRANSPORT_ERROR + Instead of returning an error it is better to return all zero data. */ memset(buffer, 0, len); @@ -778,7 +772,7 @@ sddr09_read_data(struct us_data *us, result = sddr09_read20(us, address>>1, pages, info->pageshift, buffer, 0); - if (result != USB_STOR_TRANSPORT_GOOD) + if (result) break; } @@ -844,7 +838,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba, pba = sddr09_find_unused_pba(info, lba); if (!pba) { printk("sddr09_write_lba: Out of unused blocks\n"); - return USB_STOR_TRANSPORT_ERROR; + return -ENOSPC; } info->pba_to_lba[pba] = lba; info->lba_to_pba[lba] = pba; @@ -855,7 +849,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba, /* Maybe it is impossible to write to PBA 1. Fake success, but don't do anything. */ printk("sddr09: avoid writing to pba 1\n"); - return USB_STOR_TRANSPORT_GOOD; + return 0; } pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT); @@ -864,7 +858,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba, address = (pba << (info->pageshift + info->blockshift)); result = sddr09_read22(us, address>>1, info->blocksize, info->pageshift, blockbuffer, 0); - if (result != USB_STOR_TRANSPORT_GOOD) + if (result) return result; /* check old contents and fill lba */ @@ -911,7 +905,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba, { unsigned char status = 0; int result2 = sddr09_read_status(us, &status); - if (result2 != USB_STOR_TRANSPORT_GOOD) + if (result2) US_DEBUGP("sddr09_write_inplace: cannot read status\n"); else if (status != 0xc0) US_DEBUGP("sddr09_write_inplace: status after write: 0x%x\n", @@ -952,7 +946,7 @@ sddr09_write_data(struct us_data *us, blockbuffer = kmalloc(blocklen, GFP_NOIO); if (!blockbuffer) { printk("sddr09_write_data: Out of memory\n"); - return USB_STOR_TRANSPORT_ERROR; + return -ENOMEM; } // Since we don't write the user data directly to the device, @@ -964,14 +958,14 @@ sddr09_write_data(struct us_data *us, if (buffer == NULL) { printk("sddr09_write_data: Out of memory\n"); kfree(blockbuffer); - return USB_STOR_TRANSPORT_ERROR; + return -ENOMEM; } // Figure out the initial LBA and page lba = address >> info->blockshift; page = (address & info->blockmask); - result = USB_STOR_TRANSPORT_GOOD; + result = 0; index = offset = 0; while (sectors > 0) { @@ -987,7 +981,7 @@ sddr09_write_data(struct us_data *us, result = sddr09_write_lba(us, lba, page, pages, buffer, blockbuffer); - if (result != USB_STOR_TRANSPORT_GOOD) + if (result) break; page = 0; @@ -1036,7 +1030,7 @@ sddr09_read_deviceID(struct us_data *us, unsigned char *deviceID) { command[1] = LUNBITS; result = sddr09_send_scsi_command(us, command, 12); - if (result != USB_STOR_TRANSPORT_GOOD) + if (result) return result; result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, @@ -1045,8 +1039,7 @@ sddr09_read_deviceID(struct us_data *us, unsigned char *deviceID) { for (i = 0; i < 4; i++) deviceID[i] = content[i]; - return (result == USB_STOR_XFER_GOOD ? - USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); + return (result == USB_STOR_XFER_GOOD ? 0 : -EIO); } static int @@ -1055,7 +1048,7 @@ sddr09_get_wp(struct us_data *us, struct sddr09_card_info *info) { unsigned char status; result = sddr09_read_status(us, &status); - if (result != USB_STOR_TRANSPORT_GOOD) { + if (result) { US_DEBUGP("sddr09_get_wp: read_status fails\n"); return result; } @@ -1071,7 +1064,7 @@ sddr09_get_wp(struct us_data *us, struct sddr09_card_info *info) { if (status & 0x1) US_DEBUGP(" Error"); US_DEBUGP("\n"); - return USB_STOR_TRANSPORT_GOOD; + return 0; } #if 0 @@ -1103,7 +1096,7 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) { result = sddr09_read_deviceID(us, deviceID); - if (result != USB_STOR_TRANSPORT_GOOD) { + if (result) { US_DEBUGP("Result of read_deviceID is %d\n", result); printk("sddr09: could not read card info\n"); return NULL; @@ -1214,7 +1207,7 @@ sddr09_read_map(struct us_data *us) { us, address>>1, min(alloc_blocks, numblocks - i), buffer, 0); - if (result != USB_STOR_TRANSPORT_GOOD) { + if (result) { result = -1; goto done; } @@ -1402,7 +1395,7 @@ usb_stor_sddr09_dpcm_init(struct us_data *us) { return result; result = sddr09_send_command(us, 0x01, USB_DIR_IN, data, 2); - if (result != USB_STOR_TRANSPORT_GOOD) { + if (result) { US_DEBUGP("sddr09_init: send_command fails\n"); return result; } @@ -1411,7 +1404,7 @@ usb_stor_sddr09_dpcm_init(struct us_data *us) { // get 07 02 result = sddr09_send_command(us, 0x08, USB_DIR_IN, data, 2); - if (result != USB_STOR_TRANSPORT_GOOD) { + if (result) { US_DEBUGP("sddr09_init: 2nd send_command fails\n"); return result; } @@ -1420,7 +1413,7 @@ usb_stor_sddr09_dpcm_init(struct us_data *us) { // get 07 00 result = sddr09_request_sense(us, data, 18); - if (result == USB_STOR_TRANSPORT_GOOD && data[2] != 0) { + if (result == 0 && data[2] != 0) { int j; for (j=0; j<18; j++) printk(" %02X", data[j]); @@ -1567,7 +1560,9 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) US_DEBUGP("READ_10: read page %d pagect %d\n", page, pages); - return sddr09_read_data(us, page, pages); + result = sddr09_read_data(us, page, pages); + return (result == 0 ? USB_STOR_TRANSPORT_GOOD : + USB_STOR_TRANSPORT_ERROR); } if (srb->cmnd[0] == WRITE_10) { @@ -1580,7 +1575,9 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) US_DEBUGP("WRITE_10: write page %d pagect %d\n", page, pages); - return sddr09_write_data(us, page, pages); + result = sddr09_write_data(us, page, pages); + return (result == 0 ? USB_STOR_TRANSPORT_GOOD : + USB_STOR_TRANSPORT_ERROR); } /* catch-all for all other commands, except @@ -1606,10 +1603,10 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) US_DEBUGP("SDDR09: Send control for command %s\n", ptr); result = sddr09_send_scsi_command(us, srb->cmnd, 12); - if (result != USB_STOR_TRANSPORT_GOOD) { + if (result) { US_DEBUGP("sddr09_transport: sddr09_send_scsi_command " "returns %d\n", result); - return result; + return USB_STOR_TRANSPORT_ERROR; } if (srb->request_bufflen == 0) -- cgit v1.2.3 From a6c976c6c4628ce0c9277c47e7545956d9d4f441 Mon Sep 17 00:00:00 2001 From: Matthew Dharm Date: Sun, 4 Dec 2005 21:59:45 -0800 Subject: [PATCH] USB Storage: more sddr09 cleanups This is the third of three patches to prepare the sddr09 subdriver for conversion to the Sim-SCSI framework. This patch (as596) moves the computation of the LBA to the start of the read/write routines, so that addresses completely beyond the end of the device can be detected and reported differently from transfers that are partially within the device's capacity. Signed-off-by: Alan Stern Acked-by: Andries Brouwer Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/sddr09.c | 33 +++++++++++++++++++++++---------- 1 file changed, 23 insertions(+), 10 deletions(-) diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index 760fe9362b6d..b8e7802c871d 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -711,6 +711,13 @@ sddr09_read_data(struct us_data *us, unsigned int len, index, offset; int result; + // Figure out the initial LBA and page + lba = address >> info->blockshift; + page = (address & info->blockmask); + maxlba = info->capacity >> (info->pageshift + info->blockshift); + if (lba >= maxlba) + return -EIO; + // Since we only read in one block at a time, we have to create // a bounce buffer and move the data a piece at a time between the // bounce buffer and the actual transfer buffer. @@ -722,11 +729,6 @@ sddr09_read_data(struct us_data *us, return -ENOMEM; } - // Figure out the initial LBA and page - lba = address >> info->blockshift; - page = (address & info->blockmask); - maxlba = info->capacity >> (info->pageshift + info->blockshift); - // This could be made much more efficient by checking for // contiguous LBA's. Another exercise left to the student. @@ -928,13 +930,20 @@ sddr09_write_data(struct us_data *us, unsigned int sectors) { struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra; - unsigned int lba, page, pages; + unsigned int lba, maxlba, page, pages; unsigned int pagelen, blocklen; unsigned char *blockbuffer; unsigned char *buffer; unsigned int len, index, offset; int result; + // Figure out the initial LBA and page + lba = address >> info->blockshift; + page = (address & info->blockmask); + maxlba = info->capacity >> (info->pageshift + info->blockshift); + if (lba >= maxlba) + return -EIO; + // blockbuffer is used for reading in the old data, overwriting // with the new data, and performing ECC calculations @@ -961,10 +970,6 @@ sddr09_write_data(struct us_data *us, return -ENOMEM; } - // Figure out the initial LBA and page - lba = address >> info->blockshift; - page = (address & info->blockmask); - result = 0; index = offset = 0; @@ -975,6 +980,14 @@ sddr09_write_data(struct us_data *us, pages = min(sectors, info->blocksize - page); len = (pages << info->pageshift); + /* Not overflowing capacity? */ + if (lba >= maxlba) { + US_DEBUGP("Error: Requested lba %u exceeds " + "maximum %u\n", lba, maxlba); + result = -EIO; + break; + } + // Get the data from the transfer buffer usb_stor_access_xfer_buf(buffer, len, us->srb, &index, &offset, FROM_XFER_BUF); -- cgit v1.2.3 From e80b0fade09ef1ee67b0898d480d4c588f124d5f Mon Sep 17 00:00:00 2001 From: Matthew Dharm Date: Sun, 4 Dec 2005 22:02:44 -0800 Subject: [PATCH] USB Storage: add alauda support This patch adds another usb-storage subdriver, which supports two fairly old dual-XD/SmartMedia reader-writers (USB1.1 devices). This driver was written by Daniel Drake -- he notes that he wrote this driver without specs, however a vendor-supplied GPL driver for the previous generation of products ("sma03") did prove to be quite useful, as did the sddr09 driver which also has to deal with low-level physical block layout on SmartMedia. The original patch has been reformed by me, as it clashed with the libusual patches. We really need to consolidate some of this common SmartMedia code, and get together with the MTD guys to share it with them as well. Signed-off-by: Daniel Drake Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Kconfig | 9 + drivers/usb/storage/Makefile | 1 + drivers/usb/storage/alauda.c | 1119 ++++++++++++++++++++++++++++++++++++ drivers/usb/storage/alauda.h | 100 ++++ drivers/usb/storage/unusual_devs.h | 14 + drivers/usb/storage/usb.c | 12 + include/linux/usb_usual.h | 3 + 7 files changed, 1258 insertions(+) create mode 100644 drivers/usb/storage/alauda.c create mode 100644 drivers/usb/storage/alauda.h diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index bdfcb95d9c12..92be101feba7 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -112,6 +112,15 @@ config USB_STORAGE_JUMPSHOT Say Y here to include additional code to support the Lexar Jumpshot USB CompactFlash reader. +config USB_STORAGE_ALAUDA + bool "Olympus MAUSB-10/Fuji DPC-R1 support (EXPERIMENTAL)" + depends on USB_STORAGE && EXPERIMENTAL + help + Say Y here to include additional code to support the Olympus MAUSB-10 + and Fujifilm DPC-R1 USB Card reader/writer devices. + + These devices are based on the Alauda chip and support support both + XD and SmartMedia cards. config USB_STORAGE_ONETOUCH bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)" diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 2d416e9028bb..8cbba22508a4 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -18,6 +18,7 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_DPCM) += dpcm.o usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200) += isd200.o usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o +usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c new file mode 100644 index 000000000000..4d3cbb12b713 --- /dev/null +++ b/drivers/usb/storage/alauda.c @@ -0,0 +1,1119 @@ +/* + * Driver for Alauda-based card readers + * + * Current development and maintenance by: + * (c) 2005 Daniel Drake + * + * The 'Alauda' is a chip manufacturered by RATOC for OEM use. + * + * Alauda implements a vendor-specific command set to access two media reader + * ports (XD, SmartMedia). This driver converts SCSI commands to the commands + * which are accepted by these devices. + * + * The driver was developed through reverse-engineering, with the help of the + * sddr09 driver which has many similarities, and with some help from the + * (very old) vendor-supplied GPL sma03 driver. + * + * For protocol info, see http://alauda.sourceforge.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" +#include "alauda.h" + +#define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) +#define LSB_of(s) ((s)&0xFF) +#define MSB_of(s) ((s)>>8) + +#define MEDIA_PORT(us) us->srb->device->lun +#define MEDIA_INFO(us) ((struct alauda_info *)us->extra)->port[MEDIA_PORT(us)] + +#define PBA_LO(pba) ((pba & 0xF) << 5) +#define PBA_HI(pba) (pba >> 3) +#define PBA_ZONE(pba) (pba >> 11) + +/* + * Media handling + */ + +struct alauda_card_info { + unsigned char id; /* id byte */ + unsigned char chipshift; /* 1< LBA mappings for a particular port + */ +static void alauda_free_maps (struct alauda_media_info *media_info) +{ + unsigned int shift = media_info->zoneshift + + media_info->blockshift + media_info->pageshift; + unsigned int num_zones = media_info->capacity >> shift; + unsigned int i; + + if (media_info->lba_to_pba != NULL) + for (i = 0; i < num_zones; i++) { + kfree(media_info->lba_to_pba[i]); + media_info->lba_to_pba[i] = NULL; + } + + if (media_info->pba_to_lba != NULL) + for (i = 0; i < num_zones; i++) { + kfree(media_info->pba_to_lba[i]); + media_info->pba_to_lba[i] = NULL; + } +} + +/* + * Returns 2 bytes of status data + * The first byte describes media status, and second byte describes door status + */ +static int alauda_get_media_status(struct us_data *us, unsigned char *data) +{ + int rc; + unsigned char command; + + if (MEDIA_PORT(us) == ALAUDA_PORT_XD) + command = ALAUDA_GET_XD_MEDIA_STATUS; + else + command = ALAUDA_GET_SM_MEDIA_STATUS; + + rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, + command, 0xc0, 0, 1, data, 2); + + US_DEBUGP("alauda_get_media_status: Media status %02X %02X\n", + data[0], data[1]); + + return rc; +} + +/* + * Clears the "media was changed" bit so that we know when it changes again + * in the future. + */ +static int alauda_ack_media(struct us_data *us) +{ + unsigned char command; + + if (MEDIA_PORT(us) == ALAUDA_PORT_XD) + command = ALAUDA_ACK_XD_MEDIA_CHANGE; + else + command = ALAUDA_ACK_SM_MEDIA_CHANGE; + + return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, + command, 0x40, 0, 1, NULL, 0); +} + +/* + * Retrieves a 4-byte media signature, which indicates manufacturer, capacity, + * and some other details. + */ +static int alauda_get_media_signature(struct us_data *us, unsigned char *data) +{ + unsigned char command; + + if (MEDIA_PORT(us) == ALAUDA_PORT_XD) + command = ALAUDA_GET_XD_MEDIA_SIG; + else + command = ALAUDA_GET_SM_MEDIA_SIG; + + return usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, + command, 0xc0, 0, 0, data, 4); +} + +/* + * Resets the media status (but not the whole device?) + */ +static int alauda_reset_media(struct us_data *us) +{ + unsigned char *command = us->iobuf; + + memset(command, 0, 9); + command[0] = ALAUDA_BULK_CMD; + command[1] = ALAUDA_BULK_RESET_MEDIA; + command[8] = MEDIA_PORT(us); + + return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + command, 9, NULL); +} + +/* + * Examines the media and deduces capacity, etc. + */ +static int alauda_init_media(struct us_data *us) +{ + unsigned char *data = us->iobuf; + int ready = 0; + struct alauda_card_info *media_info; + unsigned int num_zones; + + while (ready == 0) { + msleep(20); + + if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (data[0] & 0x10) + ready = 1; + } + + US_DEBUGP("alauda_init_media: We are ready for action!\n"); + + if (alauda_ack_media(us) != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + msleep(10); + + if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (data[0] != 0x14) { + US_DEBUGP("alauda_init_media: Media not ready after ack\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + if (alauda_get_media_signature(us, data) != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUGP("alauda_init_media: Media signature: %02X %02X %02X %02X\n", + data[0], data[1], data[2], data[3]); + media_info = alauda_card_find_id(data[1]); + if (media_info == NULL) { + printk("alauda_init_media: Unrecognised media signature: " + "%02X %02X %02X %02X\n", + data[0], data[1], data[2], data[3]); + return USB_STOR_TRANSPORT_ERROR; + } + + MEDIA_INFO(us).capacity = 1 << media_info->chipshift; + US_DEBUGP("Found media with capacity: %ldMB\n", + MEDIA_INFO(us).capacity >> 20); + + MEDIA_INFO(us).pageshift = media_info->pageshift; + MEDIA_INFO(us).blockshift = media_info->blockshift; + MEDIA_INFO(us).zoneshift = media_info->zoneshift; + + MEDIA_INFO(us).pagesize = 1 << media_info->pageshift; + MEDIA_INFO(us).blocksize = 1 << media_info->blockshift; + MEDIA_INFO(us).zonesize = 1 << media_info->zoneshift; + + MEDIA_INFO(us).uzonesize = ((1 << media_info->zoneshift) / 128) * 125; + MEDIA_INFO(us).blockmask = MEDIA_INFO(us).blocksize - 1; + + num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift + + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift); + MEDIA_INFO(us).pba_to_lba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO); + MEDIA_INFO(us).lba_to_pba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO); + + if (alauda_reset_media(us) != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Examines the media status and does the right thing when the media has gone, + * appeared, or changed. + */ +static int alauda_check_media(struct us_data *us) +{ + struct alauda_info *info = (struct alauda_info *) us->extra; + unsigned char status[2]; + int rc; + + rc = alauda_get_media_status(us, status); + + /* Check for no media or door open */ + if ((status[0] & 0x80) || ((status[0] & 0x1F) == 0x10) + || ((status[1] & 0x01) == 0)) { + US_DEBUGP("alauda_check_media: No media, or door open\n"); + alauda_free_maps(&MEDIA_INFO(us)); + info->sense_key = 0x02; + info->sense_asc = 0x3A; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; + } + + /* Check for media change */ + if (status[0] & 0x08) { + US_DEBUGP("alauda_check_media: Media change detected\n"); + alauda_free_maps(&MEDIA_INFO(us)); + alauda_init_media(us); + + info->sense_key = UNIT_ATTENTION; + info->sense_asc = 0x28; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Checks the status from the 2nd status register + * Returns 3 bytes of status data, only the first is known + */ +static int alauda_check_status2(struct us_data *us) +{ + int rc; + unsigned char command[] = { + ALAUDA_BULK_CMD, ALAUDA_BULK_GET_STATUS2, + 0, 0, 0, 0, 3, 0, MEDIA_PORT(us) + }; + unsigned char data[3]; + + rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + command, 9, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data, 3, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + US_DEBUGP("alauda_check_status2: %02X %02X %02X\n", data[0], data[1], data[2]); + if (data[0] & ALAUDA_STATUS_ERROR) + return USB_STOR_XFER_ERROR; + + return USB_STOR_XFER_GOOD; +} + +/* + * Gets the redundancy data for the first page of a PBA + * Returns 16 bytes. + */ +static int alauda_get_redu_data(struct us_data *us, u16 pba, unsigned char *data) +{ + int rc; + unsigned char command[] = { + ALAUDA_BULK_CMD, ALAUDA_BULK_GET_REDU_DATA, + PBA_HI(pba), PBA_ZONE(pba), 0, PBA_LO(pba), 0, 0, MEDIA_PORT(us) + }; + + rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + command, 9, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data, 16, NULL); +} + +/* + * Finds the first unused PBA in a zone + * Returns the absolute PBA of an unused PBA, or 0 if none found. + */ +static u16 alauda_find_unused_pba(struct alauda_media_info *info, + unsigned int zone) +{ + u16 *pba_to_lba = info->pba_to_lba[zone]; + unsigned int i; + + for (i = 0; i < info->zonesize; i++) + if (pba_to_lba[i] == UNDEF) + return (zone << info->zoneshift) + i; + + return 0; +} + +/* + * Reads the redundancy data for all PBA's in a zone + * Produces lba <--> pba mappings + */ +static int alauda_read_map(struct us_data *us, unsigned int zone) +{ + unsigned char *data = us->iobuf; + int result; + int i, j; + unsigned int zonesize = MEDIA_INFO(us).zonesize; + unsigned int uzonesize = MEDIA_INFO(us).uzonesize; + unsigned int lba_offset, lba_real, blocknum; + unsigned int zone_base_lba = zone * uzonesize; + unsigned int zone_base_pba = zone * zonesize; + u16 *lba_to_pba = kcalloc(zonesize, sizeof(u16), GFP_NOIO); + u16 *pba_to_lba = kcalloc(zonesize, sizeof(u16), GFP_NOIO); + if (lba_to_pba == NULL || pba_to_lba == NULL) { + result = USB_STOR_TRANSPORT_ERROR; + goto error; + } + + US_DEBUGP("alauda_read_map: Mapping blocks for zone %d\n", zone); + + /* 1024 PBA's per zone */ + for (i = 0; i < zonesize; i++) + lba_to_pba[i] = pba_to_lba[i] = UNDEF; + + for (i = 0; i < zonesize; i++) { + blocknum = zone_base_pba + i; + + result = alauda_get_redu_data(us, blocknum, data); + if (result != USB_STOR_XFER_GOOD) { + result = USB_STOR_TRANSPORT_ERROR; + goto error; + } + + /* special PBAs have control field 0^16 */ + for (j = 0; j < 16; j++) + if (data[j] != 0) + goto nonz; + pba_to_lba[i] = UNUSABLE; + US_DEBUGP("alauda_read_map: PBA %d has no logical mapping\n", blocknum); + continue; + + nonz: + /* unwritten PBAs have control field FF^16 */ + for (j = 0; j < 16; j++) + if (data[j] != 0xff) + goto nonff; + continue; + + nonff: + /* normal PBAs start with six FFs */ + if (j < 6) { + US_DEBUGP("alauda_read_map: PBA %d has no logical mapping: " + "reserved area = %02X%02X%02X%02X " + "data status %02X block status %02X\n", + blocknum, data[0], data[1], data[2], data[3], + data[4], data[5]); + pba_to_lba[i] = UNUSABLE; + continue; + } + + if ((data[6] >> 4) != 0x01) { + US_DEBUGP("alauda_read_map: PBA %d has invalid address " + "field %02X%02X/%02X%02X\n", + blocknum, data[6], data[7], data[11], data[12]); + pba_to_lba[i] = UNUSABLE; + continue; + } + + /* check even parity */ + if (parity[data[6] ^ data[7]]) { + printk("alauda_read_map: Bad parity in LBA for block %d" + " (%02X %02X)\n", i, data[6], data[7]); + pba_to_lba[i] = UNUSABLE; + continue; + } + + lba_offset = short_pack(data[7], data[6]); + lba_offset = (lba_offset & 0x07FF) >> 1; + lba_real = lba_offset + zone_base_lba; + + /* + * Every 1024 physical blocks ("zone"), the LBA numbers + * go back to zero, but are within a higher block of LBA's. + * Also, there is a maximum of 1000 LBA's per zone. + * In other words, in PBA 1024-2047 you will find LBA 0-999 + * which are really LBA 1000-1999. This allows for 24 bad + * or special physical blocks per zone. + */ + + if (lba_offset >= uzonesize) { + printk("alauda_read_map: Bad low LBA %d for block %d\n", + lba_real, blocknum); + continue; + } + + if (lba_to_pba[lba_offset] != UNDEF) { + printk("alauda_read_map: LBA %d seen for PBA %d and %d\n", + lba_real, lba_to_pba[lba_offset], blocknum); + continue; + } + + pba_to_lba[i] = lba_real; + lba_to_pba[lba_offset] = blocknum; + continue; + } + + MEDIA_INFO(us).lba_to_pba[zone] = lba_to_pba; + MEDIA_INFO(us).pba_to_lba[zone] = pba_to_lba; + result = 0; + goto out; + +error: + kfree(lba_to_pba); + kfree(pba_to_lba); +out: + return result; +} + +/* + * Checks to see whether we have already mapped a certain zone + * If we haven't, the map is generated + */ +static void alauda_ensure_map_for_zone(struct us_data *us, unsigned int zone) +{ + if (MEDIA_INFO(us).lba_to_pba[zone] == NULL + || MEDIA_INFO(us).pba_to_lba[zone] == NULL) + alauda_read_map(us, zone); +} + +/* + * Erases an entire block + */ +static int alauda_erase_block(struct us_data *us, u16 pba) +{ + int rc; + unsigned char command[] = { + ALAUDA_BULK_CMD, ALAUDA_BULK_ERASE_BLOCK, PBA_HI(pba), + PBA_ZONE(pba), 0, PBA_LO(pba), 0x02, 0, MEDIA_PORT(us) + }; + unsigned char buf[2]; + + US_DEBUGP("alauda_erase_block: Erasing PBA %d\n", pba); + + rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + command, 9, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + buf, 2, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + US_DEBUGP("alauda_erase_block: Erase result: %02X %02X\n", + buf[0], buf[1]); + return rc; +} + +/* + * Reads data from a certain offset page inside a PBA, including interleaved + * redundancy data. Returns (pagesize+64)*pages bytes in data. + */ +static int alauda_read_block_raw(struct us_data *us, u16 pba, + unsigned int page, unsigned int pages, unsigned char *data) +{ + int rc; + unsigned char command[] = { + ALAUDA_BULK_CMD, ALAUDA_BULK_READ_BLOCK, PBA_HI(pba), + PBA_ZONE(pba), 0, PBA_LO(pba) + page, pages, 0, MEDIA_PORT(us) + }; + + US_DEBUGP("alauda_read_block: pba %d page %d count %d\n", + pba, page, pages); + + rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + command, 9, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data, (MEDIA_INFO(us).pagesize + 64) * pages, NULL); +} + +/* + * Reads data from a certain offset page inside a PBA, excluding redundancy + * data. Returns pagesize*pages bytes in data. Note that data must be big enough + * to hold (pagesize+64)*pages bytes of data, but you can ignore those 'extra' + * trailing bytes outside this function. + */ +static int alauda_read_block(struct us_data *us, u16 pba, + unsigned int page, unsigned int pages, unsigned char *data) +{ + int i, rc; + unsigned int pagesize = MEDIA_INFO(us).pagesize; + + rc = alauda_read_block_raw(us, pba, page, pages, data); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + /* Cut out the redundancy data */ + for (i = 0; i < pages; i++) { + int dest_offset = i * pagesize; + int src_offset = i * (pagesize + 64); + memmove(data + dest_offset, data + src_offset, pagesize); + } + + return rc; +} + +/* + * Writes an entire block of data and checks status after write. + * Redundancy data must be already included in data. Data should be + * (pagesize+64)*blocksize bytes in length. + */ +static int alauda_write_block(struct us_data *us, u16 pba, unsigned char *data) +{ + int rc; + struct alauda_info *info = (struct alauda_info *) us->extra; + unsigned char command[] = { + ALAUDA_BULK_CMD, ALAUDA_BULK_WRITE_BLOCK, PBA_HI(pba), + PBA_ZONE(pba), 0, PBA_LO(pba), 32, 0, MEDIA_PORT(us) + }; + + US_DEBUGP("alauda_write_block: pba %d\n", pba); + + rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + command, 9, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + rc = usb_stor_bulk_transfer_buf(us, info->wr_ep, data, + (MEDIA_INFO(us).pagesize + 64) * MEDIA_INFO(us).blocksize, + NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + return alauda_check_status2(us); +} + +/* + * Write some data to a specific LBA. + */ +static int alauda_write_lba(struct us_data *us, u16 lba, + unsigned int page, unsigned int pages, + unsigned char *ptr, unsigned char *blockbuffer) +{ + u16 pba, lbap, new_pba; + unsigned char *bptr, *cptr, *xptr; + unsigned char ecc[3]; + int i, result; + unsigned int uzonesize = MEDIA_INFO(us).uzonesize; + unsigned int zonesize = MEDIA_INFO(us).zonesize; + unsigned int pagesize = MEDIA_INFO(us).pagesize; + unsigned int blocksize = MEDIA_INFO(us).blocksize; + unsigned int lba_offset = lba % uzonesize; + unsigned int new_pba_offset; + unsigned int zone = lba / uzonesize; + + alauda_ensure_map_for_zone(us, zone); + + pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset]; + if (pba == 1) { + /* Maybe it is impossible to write to PBA 1. + Fake success, but don't do anything. */ + printk("alauda_write_lba: avoid writing to pba 1\n"); + return USB_STOR_TRANSPORT_GOOD; + } + + new_pba = alauda_find_unused_pba(&MEDIA_INFO(us), zone); + if (!new_pba) { + printk("alauda_write_lba: Out of unused blocks\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* read old contents */ + if (pba != UNDEF) { + result = alauda_read_block_raw(us, pba, 0, + blocksize, blockbuffer); + if (result != USB_STOR_XFER_GOOD) + return result; + } else { + memset(blockbuffer, 0, blocksize * (pagesize + 64)); + } + + lbap = (lba_offset << 1) | 0x1000; + if (parity[MSB_of(lbap) ^ LSB_of(lbap)]) + lbap ^= 1; + + /* check old contents and fill lba */ + for (i = 0; i < blocksize; i++) { + bptr = blockbuffer + (i * (pagesize + 64)); + cptr = bptr + pagesize; + nand_compute_ecc(bptr, ecc); + if (!nand_compare_ecc(cptr+13, ecc)) { + US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n", + i, pba); + nand_store_ecc(cptr+13, ecc); + } + nand_compute_ecc(bptr + (pagesize / 2), ecc); + if (!nand_compare_ecc(cptr+8, ecc)) { + US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n", + i, pba); + nand_store_ecc(cptr+8, ecc); + } + cptr[6] = cptr[11] = MSB_of(lbap); + cptr[7] = cptr[12] = LSB_of(lbap); + } + + /* copy in new stuff and compute ECC */ + xptr = ptr; + for (i = page; i < page+pages; i++) { + bptr = blockbuffer + (i * (pagesize + 64)); + cptr = bptr + pagesize; + memcpy(bptr, xptr, pagesize); + xptr += pagesize; + nand_compute_ecc(bptr, ecc); + nand_store_ecc(cptr+13, ecc); + nand_compute_ecc(bptr + (pagesize / 2), ecc); + nand_store_ecc(cptr+8, ecc); + } + + result = alauda_write_block(us, new_pba, blockbuffer); + if (result != USB_STOR_XFER_GOOD) + return result; + + new_pba_offset = new_pba - (zone * zonesize); + MEDIA_INFO(us).pba_to_lba[zone][new_pba_offset] = lba; + MEDIA_INFO(us).lba_to_pba[zone][lba_offset] = new_pba; + US_DEBUGP("alauda_write_lba: Remapped LBA %d to PBA %d\n", + lba, new_pba); + + if (pba != UNDEF) { + unsigned int pba_offset = pba - (zone * zonesize); + result = alauda_erase_block(us, pba); + if (result != USB_STOR_XFER_GOOD) + return result; + MEDIA_INFO(us).pba_to_lba[zone][pba_offset] = UNDEF; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Read data from a specific sector address + */ +static int alauda_read_data(struct us_data *us, unsigned long address, + unsigned int sectors) +{ + unsigned char *buffer; + u16 lba, max_lba; + unsigned int page, len, index, offset; + unsigned int blockshift = MEDIA_INFO(us).blockshift; + unsigned int pageshift = MEDIA_INFO(us).pageshift; + unsigned int blocksize = MEDIA_INFO(us).blocksize; + unsigned int pagesize = MEDIA_INFO(us).pagesize; + unsigned int uzonesize = MEDIA_INFO(us).uzonesize; + int result; + + /* + * Since we only read in one block at a time, we have to create + * a bounce buffer and move the data a piece at a time between the + * bounce buffer and the actual transfer buffer. + * We make this buffer big enough to hold temporary redundancy data, + * which we use when reading the data blocks. + */ + + len = min(sectors, blocksize) * (pagesize + 64); + buffer = kmalloc(len, GFP_NOIO); + if (buffer == NULL) { + printk("alauda_read_data: Out of memory\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* Figure out the initial LBA and page */ + lba = address >> blockshift; + page = (address & MEDIA_INFO(us).blockmask); + max_lba = MEDIA_INFO(us).capacity >> (blockshift + pageshift); + + result = USB_STOR_TRANSPORT_GOOD; + index = offset = 0; + + while (sectors > 0) { + unsigned int zone = lba / uzonesize; /* integer division */ + unsigned int lba_offset = lba - (zone * uzonesize); + unsigned int pages; + u16 pba; + alauda_ensure_map_for_zone(us, zone); + + /* Not overflowing capacity? */ + if (lba >= max_lba) { + US_DEBUGP("Error: Requested lba %u exceeds " + "maximum %u\n", lba, max_lba); + result = USB_STOR_TRANSPORT_ERROR; + break; + } + + /* Find number of pages we can read in this block */ + pages = min(sectors, blocksize - page); + len = pages << pageshift; + + /* Find where this lba lives on disk */ + pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset]; + + if (pba == UNDEF) { /* this lba was never written */ + US_DEBUGP("Read %d zero pages (LBA %d) page %d\n", + pages, lba, page); + + /* This is not really an error. It just means + that the block has never been written. + Instead of returning USB_STOR_TRANSPORT_ERROR + it is better to return all zero data. */ + + memset(buffer, 0, len); + } else { + US_DEBUGP("Read %d pages, from PBA %d" + " (LBA %d) page %d\n", + pages, pba, lba, page); + + result = alauda_read_block(us, pba, page, pages, buffer); + if (result != USB_STOR_TRANSPORT_GOOD) + break; + } + + /* Store the data in the transfer buffer */ + usb_stor_access_xfer_buf(buffer, len, us->srb, + &index, &offset, TO_XFER_BUF); + + page = 0; + lba++; + sectors -= pages; + } + + kfree(buffer); + return result; +} + +/* + * Write data to a specific sector address + */ +static int alauda_write_data(struct us_data *us, unsigned long address, + unsigned int sectors) +{ + unsigned char *buffer, *blockbuffer; + unsigned int page, len, index, offset; + unsigned int blockshift = MEDIA_INFO(us).blockshift; + unsigned int pageshift = MEDIA_INFO(us).pageshift; + unsigned int blocksize = MEDIA_INFO(us).blocksize; + unsigned int pagesize = MEDIA_INFO(us).pagesize; + u16 lba, max_lba; + int result; + + /* + * Since we don't write the user data directly to the device, + * we have to create a bounce buffer and move the data a piece + * at a time between the bounce buffer and the actual transfer buffer. + */ + + len = min(sectors, blocksize) * pagesize; + buffer = kmalloc(len, GFP_NOIO); + if (buffer == NULL) { + printk("alauda_write_data: Out of memory\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* + * We also need a temporary block buffer, where we read in the old data, + * overwrite parts with the new data, and manipulate the redundancy data + */ + blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_NOIO); + if (blockbuffer == NULL) { + printk("alauda_write_data: Out of memory\n"); + kfree(buffer); + return USB_STOR_TRANSPORT_ERROR; + } + + /* Figure out the initial LBA and page */ + lba = address >> blockshift; + page = (address & MEDIA_INFO(us).blockmask); + max_lba = MEDIA_INFO(us).capacity >> (pageshift + blockshift); + + result = USB_STOR_TRANSPORT_GOOD; + index = offset = 0; + + while (sectors > 0) { + /* Write as many sectors as possible in this block */ + unsigned int pages = min(sectors, blocksize - page); + len = pages << pageshift; + + /* Not overflowing capacity? */ + if (lba >= max_lba) { + US_DEBUGP("alauda_write_data: Requested lba %u exceeds " + "maximum %u\n", lba, max_lba); + result = USB_STOR_TRANSPORT_ERROR; + break; + } + + /* Get the data from the transfer buffer */ + usb_stor_access_xfer_buf(buffer, len, us->srb, + &index, &offset, FROM_XFER_BUF); + + result = alauda_write_lba(us, lba, page, pages, buffer, + blockbuffer); + if (result != USB_STOR_TRANSPORT_GOOD) + break; + + page = 0; + lba++; + sectors -= pages; + } + + kfree(buffer); + kfree(blockbuffer); + return result; +} + +/* + * Our interface with the rest of the world + */ + +static void alauda_info_destructor(void *extra) +{ + struct alauda_info *info = (struct alauda_info *) extra; + int port; + + if (!info) + return; + + for (port = 0; port < 2; port++) { + struct alauda_media_info *media_info = &info->port[port]; + + alauda_free_maps(media_info); + kfree(media_info->lba_to_pba); + kfree(media_info->pba_to_lba); + } +} + +/* + * Initialize alauda_info struct and find the data-write endpoint + */ +int init_alauda(struct us_data *us) +{ + struct alauda_info *info; + struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting; + nand_init_ecc(); + + us->extra = kzalloc(sizeof(struct alauda_info), GFP_NOIO); + if (!us->extra) { + US_DEBUGP("init_alauda: Gah! Can't allocate storage for" + "alauda info struct!\n"); + return USB_STOR_TRANSPORT_ERROR; + } + info = (struct alauda_info *) us->extra; + us->extra_destructor = alauda_info_destructor; + + info->wr_ep = usb_sndbulkpipe(us->pusb_dev, + altsetting->endpoint[0].desc.bEndpointAddress + & USB_ENDPOINT_NUMBER_MASK); + + return USB_STOR_TRANSPORT_GOOD; +} + +int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + int rc; + struct alauda_info *info = (struct alauda_info *) us->extra; + unsigned char *ptr = us->iobuf; + static unsigned char inquiry_response[36] = { + 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00 + }; + + if (srb->cmnd[0] == INQUIRY) { + US_DEBUGP("alauda_transport: INQUIRY. " + "Returning bogus response.\n"); + memcpy(ptr, inquiry_response, sizeof(inquiry_response)); + fill_inquiry_response(us, ptr, 36); + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == TEST_UNIT_READY) { + US_DEBUGP("alauda_transport: TEST_UNIT_READY.\n"); + return alauda_check_media(us); + } + + if (srb->cmnd[0] == READ_CAPACITY) { + unsigned int num_zones; + unsigned long capacity; + + rc = alauda_check_media(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift + + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift); + + capacity = num_zones * MEDIA_INFO(us).uzonesize + * MEDIA_INFO(us).blocksize; + + /* Report capacity and page size */ + ((__be32 *) ptr)[0] = cpu_to_be32(capacity - 1); + ((__be32 *) ptr)[1] = cpu_to_be32(512); + + usb_stor_set_xfer_buf(ptr, 8, srb); + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == READ_10) { + unsigned int page, pages; + + rc = alauda_check_media(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + page = short_pack(srb->cmnd[3], srb->cmnd[2]); + page <<= 16; + page |= short_pack(srb->cmnd[5], srb->cmnd[4]); + pages = short_pack(srb->cmnd[8], srb->cmnd[7]); + + US_DEBUGP("alauda_transport: READ_10: page %d pagect %d\n", + page, pages); + + return alauda_read_data(us, page, pages); + } + + if (srb->cmnd[0] == WRITE_10) { + unsigned int page, pages; + + rc = alauda_check_media(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + page = short_pack(srb->cmnd[3], srb->cmnd[2]); + page <<= 16; + page |= short_pack(srb->cmnd[5], srb->cmnd[4]); + pages = short_pack(srb->cmnd[8], srb->cmnd[7]); + + US_DEBUGP("alauda_transport: WRITE_10: page %d pagect %d\n", + page, pages); + + return alauda_write_data(us, page, pages); + } + + if (srb->cmnd[0] == REQUEST_SENSE) { + US_DEBUGP("alauda_transport: REQUEST_SENSE.\n"); + + memset(ptr, 0, 18); + ptr[0] = 0xF0; + ptr[2] = info->sense_key; + ptr[7] = 11; + ptr[12] = info->sense_asc; + ptr[13] = info->sense_ascq; + usb_stor_set_xfer_buf(ptr, 18, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { + /* sure. whatever. not like we can stop the user from popping + the media out of the device (no locking doors, etc) */ + return USB_STOR_TRANSPORT_GOOD; + } + + US_DEBUGP("alauda_transport: Gah! Unknown command: %d (0x%x)\n", + srb->cmnd[0], srb->cmnd[0]); + info->sense_key = 0x05; + info->sense_asc = 0x20; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; +} + diff --git a/drivers/usb/storage/alauda.h b/drivers/usb/storage/alauda.h new file mode 100644 index 000000000000..a700f87d0803 --- /dev/null +++ b/drivers/usb/storage/alauda.h @@ -0,0 +1,100 @@ +/* + * Driver for Alauda-based card readers + * + * Current development and maintenance by: + * (c) 2005 Daniel Drake + * + * See alauda.c for more explanation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _USB_ALAUDA_H +#define _USB_ALAUDA_H + +/* + * Status bytes + */ +#define ALAUDA_STATUS_ERROR 0x01 +#define ALAUDA_STATUS_READY 0x40 + +/* + * Control opcodes (for request field) + */ +#define ALAUDA_GET_XD_MEDIA_STATUS 0x08 +#define ALAUDA_GET_SM_MEDIA_STATUS 0x98 +#define ALAUDA_ACK_XD_MEDIA_CHANGE 0x0a +#define ALAUDA_ACK_SM_MEDIA_CHANGE 0x9a +#define ALAUDA_GET_XD_MEDIA_SIG 0x86 +#define ALAUDA_GET_SM_MEDIA_SIG 0x96 + +/* + * Bulk command identity (byte 0) + */ +#define ALAUDA_BULK_CMD 0x40 + +/* + * Bulk opcodes (byte 1) + */ +#define ALAUDA_BULK_GET_REDU_DATA 0x85 +#define ALAUDA_BULK_READ_BLOCK 0x94 +#define ALAUDA_BULK_ERASE_BLOCK 0xa3 +#define ALAUDA_BULK_WRITE_BLOCK 0xb4 +#define ALAUDA_BULK_GET_STATUS2 0xb7 +#define ALAUDA_BULK_RESET_MEDIA 0xe0 + +/* + * Port to operate on (byte 8) + */ +#define ALAUDA_PORT_XD 0x00 +#define ALAUDA_PORT_SM 0x01 + +/* + * LBA and PBA are unsigned ints. Special values. + */ +#define UNDEF 0xffff +#define SPARE 0xfffe +#define UNUSABLE 0xfffd + +int init_alauda(struct us_data *us); +int alauda_transport(struct scsi_cmnd *srb, struct us_data *us); + +struct alauda_media_info { + unsigned long capacity; /* total media size in bytes */ + unsigned int pagesize; /* page size in bytes */ + unsigned int blocksize; /* number of pages per block */ + unsigned int uzonesize; /* number of usable blocks per zone */ + unsigned int zonesize; /* number of blocks per zone */ + unsigned int blockmask; /* mask to get page from address */ + + unsigned char pageshift; + unsigned char blockshift; + unsigned char zoneshift; + + u16 **lba_to_pba; /* logical to physical block map */ + u16 **pba_to_lba; /* physical to logical block map */ +}; + +struct alauda_info { + struct alauda_media_info port[2]; + int wr_ep; /* endpoint to write data out of */ + + unsigned char sense_key; + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ +}; + +#endif + diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index be3c06d17533..7a865dd04683 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -535,6 +535,13 @@ UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999, "Silicon Media R/W", US_SC_DEVICE, US_PR_DEVICE, NULL, 0), +#ifdef CONFIG_USB_STORAGE_ALAUDA +UNUSUAL_DEV( 0x0584, 0x0008, 0x0102, 0x0102, + "Fujifilm", + "DPC-R1 (Alauda)", + US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ), +#endif + /* Fabrizio Fellini */ UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210, "Fujifilm", @@ -784,6 +791,13 @@ UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ), #endif +#ifdef CONFIG_USB_STORAGE_ALAUDA +UNUSUAL_DEV( 0x07b4, 0x010a, 0x0102, 0x0102, + "Olympus", + "MAUSB-10 (Alauda)", + US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ), +#endif + #ifdef CONFIG_USB_STORAGE_DATAFAB UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015, "Datafab", diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 85c8c17b3c0c..dbcf23980ff1 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -94,6 +94,9 @@ #ifdef CONFIG_USB_STORAGE_ONETOUCH #include "onetouch.h" #endif +#ifdef CONFIG_USB_STORAGE_ALAUDA +#include "alauda.h" +#endif /* Some informational data */ MODULE_AUTHOR("Matthew Dharm "); @@ -644,6 +647,15 @@ static int get_protocol(struct us_data *us) break; #endif +#ifdef CONFIG_USB_STORAGE_ALAUDA + case US_PR_ALAUDA: + us->transport_name = "Alauda Control/Bulk"; + us->transport = alauda_transport; + us->transport_reset = usb_stor_Bulk_reset; + us->max_lun = 1; + break; +#endif + default: return -EIO; } diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index f9c058f33712..b2d08984a9f7 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -102,6 +102,9 @@ enum { US_DO_ALL_FLAGS }; #ifdef CONFIG_USB_STORAGE_JUMPSHOT #define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */ #endif +#ifdef CONFIG_USB_STORAGE_ALAUDA +#define US_PR_ALAUDA 0xf4 /* Alauda chipsets */ +#endif #define US_PR_DEVICE 0xff /* Use device's value */ -- cgit v1.2.3 From 8836aeb86158163532c1835e74751708c2d74385 Mon Sep 17 00:00:00 2001 From: Matthew Dharm Date: Sun, 4 Dec 2005 22:03:47 -0800 Subject: [PATCH] USB Storage: update MAINTAINERS Someone recently pointed out to me that the MAINTAINERS entry for usb-storage was, perhaps, in need of changing. Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 861d2975476f..3fd7687a6ad9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2657,7 +2657,7 @@ USB MASS STORAGE DRIVER P: Matthew Dharm M: mdharm-usb@one-eyed-alien.net L: linux-usb-users@lists.sourceforge.net -L: linux-usb-devel@lists.sourceforge.net +L: usb-storage@lists.one-eyed-alien.net S: Maintained W: http://www.one-eyed-alien.net/~mdharm/linux-usb/ -- cgit v1.2.3 From 3717f2952bd0aab30fe2a6af80657abbeb065461 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 30 Nov 2005 13:57:45 -0800 Subject: [PATCH] USB: usb-storage: add debug entry for REPORT LUNS Bugs involving the REPORT LUNS SCSI-3 command are much easier to track down if usb-storage displays the command's name, rather than "(Unknown command)". Signed-off-by: Paul Walmsley Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/debug.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/storage/debug.c b/drivers/usb/storage/debug.c index 5a9321705a74..01e430654a13 100644 --- a/drivers/usb/storage/debug.c +++ b/drivers/usb/storage/debug.c @@ -132,6 +132,7 @@ void usb_stor_show_command(struct scsi_cmnd *srb) case 0x5C: what = "READ BUFFER CAPACITY"; break; case 0x5D: what = "SEND CUE SHEET"; break; case GPCMD_BLANK: what = "BLANK"; break; + case REPORT_LUNS: what = "REPORT LUNS"; break; case MOVE_MEDIUM: what = "MOVE_MEDIUM or PLAY AUDIO (12)"; break; case READ_12: what = "READ_12"; break; case WRITE_12: what = "WRITE_12"; break; -- cgit v1.2.3 From f3d34ed48c80903544b509031fee64838d29f35f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 13 Dec 2005 10:32:13 -0500 Subject: [PATCH] USB: fix local variable clash This patch (as621) fixes a local variable conflict I accidently introduced into usb_set_configuration. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 99ab774d4fdb..319de03944e7 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1387,11 +1387,11 @@ free_interfaces: if (dev->state != USB_STATE_ADDRESS) usb_disable_device (dev, 1); // Skip ep0 - n = dev->bus_mA - cp->desc.bMaxPower * 2; - if (n < 0) + i = dev->bus_mA - cp->desc.bMaxPower * 2; + if (i < 0) dev_warn(&dev->dev, "new config #%d exceeds power " "limit by %dmA\n", - configuration, -n); + configuration, -i); if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION, 0, configuration, 0, -- cgit v1.2.3 From 52950ed40dc97456209979af1d8f51b63cf6dcab Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Sun, 11 Dec 2005 16:20:08 +0100 Subject: [PATCH] USB: Use ARRAY_SIZE macro Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove duplicates of ARRAY_SIZE. Some trailing whitespaces are also removed. Patch is compile-tested on i386. Signed-off-by: Tobias Klauser Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/dummy_hcd.c | 2 +- drivers/usb/input/aiptek.c | 4 ++-- drivers/usb/media/ibmcam.c | 2 +- drivers/usb/media/sn9c102_core.c | 23 ++++++++++------------- drivers/usb/media/w9968cf.c | 2 +- drivers/usb/net/zd1201.c | 8 ++++---- drivers/usb/serial/io_edgeport.c | 2 +- drivers/usb/serial/io_edgeport.h | 3 --- drivers/usb/serial/safe_serial.c | 2 +- drivers/usb/serial/ti_usb_3410_5052.c | 7 ++----- drivers/usb/storage/sddr09.c | 4 +--- 11 files changed, 24 insertions(+), 35 deletions(-) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index ce0d4b412dfe..9734cb76dd6c 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -138,7 +138,7 @@ static const char *const ep_name [] = { /* or like sa1100: two fixed function endpoints */ "ep1out-bulk", "ep2in-bulk", }; -#define DUMMY_ENDPOINTS (sizeof(ep_name)/sizeof(char *)) +#define DUMMY_ENDPOINTS ARRAY_SIZE(ep_name) /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c index 87ae08c99bc4..a6693b0d1c4c 100644 --- a/drivers/usb/input/aiptek.c +++ b/drivers/usb/input/aiptek.c @@ -2093,7 +2093,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) /* Programming the tablet macro keys needs to be done with a for loop * as the keycodes are discontiguous. */ - for (i = 0; i < sizeof(macroKeyEvents) / sizeof(macroKeyEvents[0]); ++i) + for (i = 0; i < ARRAY_SIZE(macroKeyEvents); ++i) set_bit(macroKeyEvents[i], inputdev->keybit); /* @@ -2135,7 +2135,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) * not an error :-) */ - for (i = 0; i < sizeof(speeds) / sizeof(speeds[0]); ++i) { + for (i = 0; i < ARRAY_SIZE(speeds); ++i) { aiptek->curSetting.programmableDelay = speeds[i]; (void)aiptek_program_tablet(aiptek); if (aiptek->inputdev->absmax[ABS_X] > 0) { diff --git a/drivers/usb/media/ibmcam.c b/drivers/usb/media/ibmcam.c index ba41fc7b95c2..a42c22294124 100644 --- a/drivers/usb/media/ibmcam.c +++ b/drivers/usb/media/ibmcam.c @@ -3457,7 +3457,7 @@ static void ibmcam_model3_setup_after_video_if(struct uvd *uvd) if(init_model3_input) { if (debug > 0) info("Setting input to RCA."); - for (i=0; i < (sizeof(initData)/sizeof(initData[0])); i++) { + for (i=0; i < ARRAY_SIZE(initData); i++) { ibmcam_veio(uvd, initData[i].req, initData[i].value, initData[i].index); } } diff --git a/drivers/usb/media/sn9c102_core.c b/drivers/usb/media/sn9c102_core.c index 08723459da86..8d1a1c357d5a 100644 --- a/drivers/usb/media/sn9c102_core.c +++ b/drivers/usb/media/sn9c102_core.c @@ -1316,7 +1316,7 @@ static int sn9c102_init(struct sn9c102_device* cam) struct v4l2_control ctrl; struct v4l2_queryctrl *qctrl; struct v4l2_rect* rect; - u8 i = 0, n = 0; + u8 i = 0; int err = 0; if (!(cam->state & DEV_INITIALIZED)) { @@ -1352,7 +1352,7 @@ static int sn9c102_init(struct sn9c102_device* cam) return err; if (s->pix_format.pixelformat == V4L2_PIX_FMT_SN9C10X) - DBG(3, "Compressed video format is active, quality %d", + DBG(3, "Compressed video format is active, quality %d", cam->compression.quality) else DBG(3, "Uncompressed video format is active") @@ -1364,9 +1364,8 @@ static int sn9c102_init(struct sn9c102_device* cam) } if (s->set_ctrl) { - n = sizeof(s->qctrl) / sizeof(s->qctrl[0]); - for (i = 0; i < n; i++) - if (s->qctrl[i].id != 0 && + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (s->qctrl[i].id != 0 && !(s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)) { ctrl.id = s->qctrl[i].id; ctrl.value = qctrl[i].default_value; @@ -1388,7 +1387,7 @@ static int sn9c102_init(struct sn9c102_device* cam) init_waitqueue_head(&cam->wait_stream); cam->nreadbuffers = 2; memcpy(s->_qctrl, s->qctrl, sizeof(s->qctrl)); - memcpy(&(s->_rect), &(s->cropcap.defrect), + memcpy(&(s->_rect), &(s->cropcap.defrect), sizeof(struct v4l2_rect)); cam->state |= DEV_INITIALIZED; } @@ -1810,13 +1809,12 @@ static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp, { struct sn9c102_sensor* s = cam->sensor; struct v4l2_queryctrl qc; - u8 i, n; + u8 i; if (copy_from_user(&qc, arg, sizeof(qc))) return -EFAULT; - n = sizeof(s->qctrl) / sizeof(s->qctrl[0]); - for (i = 0; i < n; i++) + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) if (qc.id && qc.id == s->qctrl[i].id) { memcpy(&qc, &(s->qctrl[i]), sizeof(qc)); if (copy_to_user(arg, &qc, sizeof(qc))) @@ -1852,7 +1850,7 @@ static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp, { struct sn9c102_sensor* s = cam->sensor; struct v4l2_control ctrl; - u8 i, n; + u8 i; int err = 0; if (!s->set_ctrl) @@ -1861,8 +1859,7 @@ static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp, if (copy_from_user(&ctrl, arg, sizeof(ctrl))) return -EFAULT; - n = sizeof(s->qctrl) / sizeof(s->qctrl[0]); - for (i = 0; i < n; i++) + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) if (ctrl.id == s->qctrl[i].id) { if (ctrl.value < s->qctrl[i].minimum || ctrl.value > s->qctrl[i].maximum) @@ -2544,7 +2541,7 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) unsigned int i, n; int err = 0, r; - n = sizeof(sn9c102_id_table)/sizeof(sn9c102_id_table[0]); + n = ARRAY_SIZE(sn9c102_id_table); for (i = 0; i < n-1; i++) if (le16_to_cpu(udev->descriptor.idVendor) == sn9c102_id_table[i].idVendor && diff --git a/drivers/usb/media/w9968cf.c b/drivers/usb/media/w9968cf.c index 52b90d50febb..8d6a1ff6595f 100644 --- a/drivers/usb/media/w9968cf.c +++ b/drivers/usb/media/w9968cf.c @@ -2958,7 +2958,7 @@ static int w9968cf_v4l_ioctl(struct inode* inode, struct file* filp, }; #define V4L1_IOCTL(cmd) \ - ((_IOC_NR((cmd)) < sizeof(v4l1_ioctls)/sizeof(char*)) ? \ + ((_IOC_NR((cmd)) < ARRAY_SIZE(v4l1_ioctls)) ? \ v4l1_ioctls[_IOC_NR((cmd))] : "?") cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp)); diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c index 4d6673adc8fc..2af21a620c07 100644 --- a/drivers/usb/net/zd1201.c +++ b/drivers/usb/net/zd1201.c @@ -1722,7 +1722,7 @@ static const struct iw_priv_args zd1201_private_args[] = { IW_PRIV_TYPE_NONE, "sethostauth" }, { ZD1201GIWHOSTAUTH, IW_PRIV_TYPE_NONE, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostauth" }, - { ZD1201SIWAUTHSTA, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, + { ZD1201SIWAUTHSTA, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, IW_PRIV_TYPE_NONE, "authstation" }, { ZD1201SIWMAXASSOC, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, IW_PRIV_TYPE_NONE, "setmaxassoc" }, @@ -1731,9 +1731,9 @@ static const struct iw_priv_args zd1201_private_args[] = { }; static const struct iw_handler_def zd1201_iw_handlers = { - .num_standard = sizeof(zd1201_iw_handler)/sizeof(iw_handler), - .num_private = sizeof(zd1201_private_handler)/sizeof(iw_handler), - .num_private_args = sizeof(zd1201_private_args)/sizeof(struct iw_priv_args), + .num_standard = ARRAY_SIZE(zd1201_iw_handler), + .num_private = ARRAY_SIZE(zd1201_private_handler), + .num_private_args = ARRAY_SIZE(zd1201_private_args), .standard = (iw_handler *)zd1201_iw_handler, .private = (iw_handler *)zd1201_private_handler, .private_args = (struct iw_priv_args *) zd1201_private_args, diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 89bb3563c919..faedbeb6ba49 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2353,7 +2353,7 @@ static int calc_baud_rate_divisor (int baudrate, int *divisor) dbg("%s - %d", __FUNCTION__, baudrate); - for (i = 0; i < NUM_ENTRIES(divisor_table); i++) { + for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { if ( divisor_table[i].BaudRate == baudrate ) { *divisor = divisor_table[i].Divisor; return 0; diff --git a/drivers/usb/serial/io_edgeport.h b/drivers/usb/serial/io_edgeport.h index 5112d7aac055..123fa8a904e6 100644 --- a/drivers/usb/serial/io_edgeport.h +++ b/drivers/usb/serial/io_edgeport.h @@ -31,9 +31,6 @@ #ifndef HIGH8 #define HIGH8(a) ((unsigned char)((a & 0xff00) >> 8)) #endif -#ifndef NUM_ENTRIES - #define NUM_ENTRIES(x) (sizeof(x)/sizeof((x)[0])) -#endif #ifndef __KERNEL__ #define __KERNEL__ diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 86dc21c728a5..f0215f850d2d 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -425,7 +425,7 @@ static int __init safe_init (void) if (vendor || product) { info ("vendor: %x product: %x\n", vendor, product); - for (i = 0; i < (sizeof (id_table) / sizeof (struct usb_device_id)); i++) { + for (i = 0; i < ARRAY_SIZE(id_table); i++) { if (!id_table[i].idVendor && !id_table[i].idProduct) { id_table[i].idVendor = vendor; id_table[i].idProduct = product; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 9e53ec75bcfd..abb830cb77bd 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -351,17 +351,14 @@ static int __init ti_init(void) int i,j; int ret; - /* insert extra vendor and product ids */ - j = sizeof(ti_id_table_3410)/sizeof(struct usb_device_id) - - TI_EXTRA_VID_PID_COUNT - 1; + j = ARRAY_SIZE(ti_id_table_3410) - TI_EXTRA_VID_PID_COUNT - 1; for (i=0; i Date: Sat, 10 Dec 2005 20:30:54 +0200 Subject: [PATCH] USB: add driver for ATI/Philips USB RF remotes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Summary: Driver for ATI/Philips USB RF remotes This is a new input driver for ATI/Philips USB RF remotes (eg. ATI Remote Wonder II). Signed-off-by: Ville Syrjälä Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/Kconfig | 14 ++ drivers/usb/input/Makefile | 1 + drivers/usb/input/ati_remote2.c | 477 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 492 insertions(+) create mode 100644 drivers/usb/input/ati_remote2.c diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig index 1e53934907c0..509dd0a04c54 100644 --- a/drivers/usb/input/Kconfig +++ b/drivers/usb/input/Kconfig @@ -273,6 +273,20 @@ config USB_ATI_REMOTE To compile this driver as a module, choose M here: the module will be called ati_remote. +config USB_ATI_REMOTE2 + tristate "ATI / Philips USB RF remote control" + depends on USB && INPUT + ---help--- + Say Y here if you want to use an ATI or Philips USB RF remote control. + These are RF remotes with USB receivers. + ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards + and is also available as a separate product. + This driver provides mouse pointer, left and right mouse buttons, + and maps all the other remote buttons to keypress events. + + To compile this driver as a module, choose M here: the module will be + called ati_remote2. + config USB_KEYSPAN_REMOTE tristate "Keyspan DMR USB remote control (EXPERIMENTAL)" depends on USB && INPUT && EXPERIMENTAL diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile index 07cb17db42fc..d512d9f488fe 100644 --- a/drivers/usb/input/Makefile +++ b/drivers/usb/input/Makefile @@ -28,6 +28,7 @@ endif obj-$(CONFIG_USB_AIPTEK) += aiptek.o obj-$(CONFIG_USB_ATI_REMOTE) += ati_remote.o +obj-$(CONFIG_USB_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_USB_HID) += usbhid.o obj-$(CONFIG_USB_KBD) += usbkbd.o obj-$(CONFIG_USB_KBTAB) += kbtab.o diff --git a/drivers/usb/input/ati_remote2.c b/drivers/usb/input/ati_remote2.c new file mode 100644 index 000000000000..ab1a1ae24be9 --- /dev/null +++ b/drivers/usb/input/ati_remote2.c @@ -0,0 +1,477 @@ +/* + * ati_remote2 - ATI/Philips USB RF remote driver + * + * Copyright (C) 2005 Ville Syrjala + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +#include + +#define DRIVER_DESC "ATI/Philips USB RF remote driver" +#define DRIVER_VERSION "0.1" + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); +MODULE_AUTHOR("Ville Syrjala "); +MODULE_LICENSE("GPL"); + +static unsigned int mode_mask = 0x1F; +module_param(mode_mask, uint, 0644); +MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>"); + +static struct usb_device_id ati_remote2_id_table[] = { + { USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */ + { } +}; +MODULE_DEVICE_TABLE(usb, ati_remote2_id_table); + +static struct { + int hw_code; + int key_code; +} ati_remote2_key_table[] = { + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + { 0x0c, KEY_POWER }, + { 0x0d, KEY_MUTE }, + { 0x10, KEY_VOLUMEUP }, + { 0x11, KEY_VOLUMEDOWN }, + { 0x20, KEY_CHANNELUP }, + { 0x21, KEY_CHANNELDOWN }, + { 0x28, KEY_FORWARD }, + { 0x29, KEY_REWIND }, + { 0x2c, KEY_PLAY }, + { 0x30, KEY_PAUSE }, + { 0x31, KEY_STOP }, + { 0x37, KEY_RECORD }, + { 0x38, KEY_DVD }, + { 0x39, KEY_TV }, + { 0x54, KEY_MENU }, + { 0x58, KEY_UP }, + { 0x59, KEY_DOWN }, + { 0x5a, KEY_LEFT }, + { 0x5b, KEY_RIGHT }, + { 0x5c, KEY_OK }, + { 0x78, KEY_A }, + { 0x79, KEY_B }, + { 0x7a, KEY_C }, + { 0x7b, KEY_D }, + { 0x7c, KEY_E }, + { 0x7d, KEY_F }, + { 0x82, KEY_ENTER }, + { 0x8e, KEY_VENDOR }, + { 0x96, KEY_COFFEE }, + { 0xa9, BTN_LEFT }, + { 0xaa, BTN_RIGHT }, + { 0xbe, KEY_QUESTION }, + { 0xd5, KEY_FRONT }, + { 0xd0, KEY_EDIT }, + { 0xf9, KEY_INFO }, + { (0x00 << 8) | 0x3f, KEY_PROG1 }, + { (0x01 << 8) | 0x3f, KEY_PROG2 }, + { (0x02 << 8) | 0x3f, KEY_PROG3 }, + { (0x03 << 8) | 0x3f, KEY_PROG4 }, + { (0x04 << 8) | 0x3f, KEY_PC }, + { 0, KEY_RESERVED } +}; + +struct ati_remote2 { + struct input_dev *idev; + struct usb_device *udev; + + struct usb_interface *intf[2]; + struct usb_endpoint_descriptor *ep[2]; + struct urb *urb[2]; + void *buf[2]; + dma_addr_t buf_dma[2]; + + unsigned long jiffies; + int mode; + + char name[64]; + char phys[64]; +}; + +static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id); +static void ati_remote2_disconnect(struct usb_interface *interface); + +static struct usb_driver ati_remote2_driver = { + .name = "ati_remote2", + .probe = ati_remote2_probe, + .disconnect = ati_remote2_disconnect, + .id_table = ati_remote2_id_table, +}; + +static int ati_remote2_open(struct input_dev *idev) +{ + struct ati_remote2 *ar2 = idev->private; + int r; + + r = usb_submit_urb(ar2->urb[0], GFP_KERNEL); + if (r) { + dev_err(&ar2->intf[0]->dev, + "%s: usb_submit_urb() = %d\n", __FUNCTION__, r); + return r; + } + r = usb_submit_urb(ar2->urb[1], GFP_KERNEL); + if (r) { + usb_kill_urb(ar2->urb[0]); + dev_err(&ar2->intf[1]->dev, + "%s: usb_submit_urb() = %d\n", __FUNCTION__, r); + return r; + } + + return 0; +} + +static void ati_remote2_close(struct input_dev *idev) +{ + struct ati_remote2 *ar2 = idev->private; + + usb_kill_urb(ar2->urb[0]); + usb_kill_urb(ar2->urb[1]); +} + +static void ati_remote2_input_mouse(struct ati_remote2 *ar2, struct pt_regs *regs) +{ + struct input_dev *idev = ar2->idev; + u8 *data = ar2->buf[0]; + + if (data[0] > 4) { + dev_err(&ar2->intf[0]->dev, + "Unknown mode byte (%02x %02x %02x %02x)\n", + data[3], data[2], data[1], data[0]); + return; + } + + if (!((1 << data[0]) & mode_mask)) + return; + + input_regs(idev, regs); + input_event(idev, EV_REL, REL_X, (s8) data[1]); + input_event(idev, EV_REL, REL_Y, (s8) data[2]); + input_sync(idev); +} + +static int ati_remote2_lookup(unsigned int hw_code) +{ + int i; + + for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++) + if (ati_remote2_key_table[i].hw_code == hw_code) + return i; + + return -1; +} + +static void ati_remote2_input_key(struct ati_remote2 *ar2, struct pt_regs *regs) +{ + struct input_dev *idev = ar2->idev; + u8 *data = ar2->buf[1]; + int hw_code, index; + + if (data[0] > 4) { + dev_err(&ar2->intf[1]->dev, + "Unknown mode byte (%02x %02x %02x %02x)\n", + data[3], data[2], data[1], data[0]); + return; + } + + hw_code = data[2]; + /* + * Mode keys (AUX1-AUX4, PC) all generate the same code byte. + * Use the mode byte to figure out which one was pressed. + */ + if (hw_code == 0x3f) { + /* + * For some incomprehensible reason the mouse pad generates + * events which look identical to the events from the last + * pressed mode key. Naturally we don't want to generate key + * events for the mouse pad so we filter out any subsequent + * events from the same mode key. + */ + if (ar2->mode == data[0]) + return; + + if (data[1] == 0) + ar2->mode = data[0]; + + hw_code |= data[0] << 8; + } + + if (!((1 << data[0]) & mode_mask)) + return; + + index = ati_remote2_lookup(hw_code); + if (index < 0) { + dev_err(&ar2->intf[1]->dev, + "Unknown code byte (%02x %02x %02x %02x)\n", + data[3], data[2], data[1], data[0]); + return; + } + + switch (data[1]) { + case 0: /* release */ + break; + case 1: /* press */ + ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]); + break; + case 2: /* repeat */ + + /* No repeat for mouse buttons. */ + if (ati_remote2_key_table[index].key_code == BTN_LEFT || + ati_remote2_key_table[index].key_code == BTN_RIGHT) + return; + + if (!time_after_eq(jiffies, ar2->jiffies)) + return; + + ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]); + break; + default: + dev_err(&ar2->intf[1]->dev, + "Unknown state byte (%02x %02x %02x %02x)\n", + data[3], data[2], data[1], data[0]); + return; + } + + input_regs(idev, regs); + input_event(idev, EV_KEY, ati_remote2_key_table[index].key_code, data[1]); + input_sync(idev); +} + +static void ati_remote2_complete_mouse(struct urb *urb, struct pt_regs *regs) +{ + struct ati_remote2 *ar2 = urb->context; + int r; + + switch (urb->status) { + case 0: + ati_remote2_input_mouse(ar2, regs); + break; + case -ENOENT: + case -EILSEQ: + case -ECONNRESET: + case -ESHUTDOWN: + dev_dbg(&ar2->intf[0]->dev, + "%s(): urb status = %d\n", __FUNCTION__, urb->status); + return; + default: + dev_err(&ar2->intf[0]->dev, + "%s(): urb status = %d\n", __FUNCTION__, urb->status); + } + + r = usb_submit_urb(urb, GFP_ATOMIC); + if (r) + dev_err(&ar2->intf[0]->dev, + "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r); +} + +static void ati_remote2_complete_key(struct urb *urb, struct pt_regs *regs) +{ + struct ati_remote2 *ar2 = urb->context; + int r; + + switch (urb->status) { + case 0: + ati_remote2_input_key(ar2, regs); + break; + case -ENOENT: + case -EILSEQ: + case -ECONNRESET: + case -ESHUTDOWN: + dev_dbg(&ar2->intf[1]->dev, + "%s(): urb status = %d\n", __FUNCTION__, urb->status); + return; + default: + dev_err(&ar2->intf[1]->dev, + "%s(): urb status = %d\n", __FUNCTION__, urb->status); + } + + r = usb_submit_urb(urb, GFP_ATOMIC); + if (r) + dev_err(&ar2->intf[1]->dev, + "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r); +} + +static int ati_remote2_input_init(struct ati_remote2 *ar2) +{ + struct input_dev *idev; + int i; + + idev = input_allocate_device(); + if (!idev) + return -ENOMEM; + + ar2->idev = idev; + idev->private = ar2; + + idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_REL); + idev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT); + idev->relbit[0] = BIT(REL_X) | BIT(REL_Y); + for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++) + set_bit(ati_remote2_key_table[i].key_code, idev->keybit); + + idev->rep[REP_DELAY] = 250; + idev->rep[REP_PERIOD] = 33; + + idev->open = ati_remote2_open; + idev->close = ati_remote2_close; + + idev->name = ar2->name; + idev->phys = ar2->phys; + + usb_to_input_id(ar2->udev, &idev->id); + idev->cdev.dev = &ar2->udev->dev; + + i = input_register_device(idev); + if (i) + input_free_device(idev); + + return i; +} + +static int ati_remote2_urb_init(struct ati_remote2 *ar2) +{ + struct usb_device *udev = ar2->udev; + int i, pipe, maxp; + + for (i = 0; i < 2; i++) { + ar2->buf[i] = usb_buffer_alloc(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]); + if (!ar2->buf[i]) + return -ENOMEM; + + ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL); + if (!ar2->urb[i]) + return -ENOMEM; + + pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress); + maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); + maxp = maxp > 4 ? 4 : maxp; + + usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp, + i ? ati_remote2_complete_key : ati_remote2_complete_mouse, + ar2, ar2->ep[i]->bInterval); + ar2->urb[i]->transfer_dma = ar2->buf_dma[i]; + ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + } + + return 0; +} + +static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2) +{ + int i; + + for (i = 0; i < 2; i++) { + if (ar2->urb[i]) + usb_free_urb(ar2->urb[i]); + + if (ar2->buf[i]) + usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]); + } +} + +static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct usb_host_interface *alt = interface->cur_altsetting; + struct ati_remote2 *ar2; + int r; + + if (alt->desc.bInterfaceNumber) + return -ENODEV; + + ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL); + if (!ar2) + return -ENOMEM; + + ar2->udev = udev; + + ar2->intf[0] = interface; + ar2->ep[0] = &alt->endpoint[0].desc; + + ar2->intf[1] = usb_ifnum_to_if(udev, 1); + r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2); + if (r) + goto fail1; + alt = ar2->intf[1]->cur_altsetting; + ar2->ep[1] = &alt->endpoint[0].desc; + + r = ati_remote2_urb_init(ar2); + if (r) + goto fail2; + + usb_make_path(udev, ar2->phys, sizeof(ar2->phys)); + strlcat(ar2->phys, "/input0", sizeof(ar2->phys)); + + strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name)); + + r = ati_remote2_input_init(ar2); + if (r) + goto fail2; + + usb_set_intfdata(interface, ar2); + + return 0; + + fail2: + ati_remote2_urb_cleanup(ar2); + + usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); + fail1: + kfree(ar2); + + return r; +} + +static void ati_remote2_disconnect(struct usb_interface *interface) +{ + struct ati_remote2 *ar2; + struct usb_host_interface *alt = interface->cur_altsetting; + + if (alt->desc.bInterfaceNumber) + return; + + ar2 = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + input_unregister_device(ar2->idev); + + ati_remote2_urb_cleanup(ar2); + + usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); + + kfree(ar2); +} + +static int __init ati_remote2_init(void) +{ + int r; + + r = usb_register(&ati_remote2_driver); + if (r) + printk(KERN_ERR "ati_remote2: usb_register() = %d\n", r); + else + printk(KERN_INFO "ati_remote2: " DRIVER_DESC " " DRIVER_VERSION "\n"); + + return r; +} + +static void __exit ati_remote2_exit(void) +{ + usb_deregister(&ati_remote2_driver); +} + +module_init(ati_remote2_init); +module_exit(ati_remote2_exit); -- cgit v1.2.3 From effac8be4e46aabf22788d24caaa1ae9c295d26d Mon Sep 17 00:00:00 2001 From: Pavel Fedin Date: Fri, 9 Dec 2005 09:30:59 +0300 Subject: [PATCH] USB: Support for Posiflex PP-7000 retail printer in Linux This little patch adds recognition of Posiflex PP-7000 retail printer to ftdo_sio module. The printer uses FT232BM bridge programmed with custom VID/PID. The patch posted to lkml and sf.net was for 2.6.11.1 kernel, here is one reworked for 2.6.12. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 11da073da178..be8c29f6d562 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -477,6 +477,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) }, { USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) }, { USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) }, + { USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 773ea3eca086..deab6661b5f0 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -352,6 +352,12 @@ /* Pyramid Computer GmbH */ #define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ +/* + * Posiflex inc retail equipment (http://www.posiflex.com.tw) + */ +#define POSIFLEX_VID 0x0d3a /* Vendor ID */ +#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ -- cgit v1.2.3 From 740a4282ed5cf0fbcad9a1a1660f24e1b5d11ed2 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Tue, 13 Dec 2005 16:18:47 +0000 Subject: [PATCH] USB: ftdi_sio: new IDs for Teratronik devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds vendor and product IDs to the ftdi_sio driver's device ID table for two devices from teratronik.de. The device IDs were submitted by O. Wölfelschneider of Teratronik Elektronische Systeme GmbH. The charset of the patch is latin-1, same as the original files. Please apply, thanks! (I've tried to avoid a clash with Andrew Morton's patch to add support for Posiflex PP-7700 printer to the same driver.) Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio.h | 7 +++++++ 2 files changed, 9 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index be8c29f6d562..eb863b3f2d79 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -471,6 +471,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) }, { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index deab6661b5f0..f380f9eaff71 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -342,6 +342,13 @@ #define XSENS_CONVERTER_6_PID 0xD38E #define XSENS_CONVERTER_7_PID 0xD38F +/* + * Teratronik product ids. + * Submitted by O. Wölfelschneider. + */ +#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ +#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ + /* * Evolution Robotics products (http://www.evolution.com/). * Submitted by Shawn M. Lavelle. -- cgit v1.2.3 From 0e8eb0f06b21bc05c42bcdbb6b273fce59ba9689 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 11 Dec 2005 20:34:02 +0100 Subject: [PATCH] USB: Remove unneeded kmalloc() return value casts Remove kmalloc() return value casts that we don't need from drivers/usb/* Signed-off-by: Jesper Juhl Signed-off-by: Greg Kroah-Hartman --- drivers/usb/media/usbvideo.c | 2 +- drivers/usb/media/w9968cf.c | 4 ++-- drivers/usb/misc/auerswald.c | 4 ++-- drivers/usb/misc/rio500.c | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/usb/media/usbvideo.c b/drivers/usb/media/usbvideo.c index af0585906b2e..4bd113325ef9 100644 --- a/drivers/usb/media/usbvideo.c +++ b/drivers/usb/media/usbvideo.c @@ -725,7 +725,7 @@ int usbvideo_register( /* Allocate user_data separately because of kmalloc's limits */ if (num_extra > 0) { up->user_size = num_cams * num_extra; - up->user_data = (char *) kmalloc(up->user_size, GFP_KERNEL); + up->user_data = kmalloc(up->user_size, GFP_KERNEL); if (up->user_data == NULL) { err("%s: Failed to allocate user_data (%d. bytes)", __FUNCTION__, up->user_size); diff --git a/drivers/usb/media/w9968cf.c b/drivers/usb/media/w9968cf.c index 8d6a1ff6595f..04d69339c054 100644 --- a/drivers/usb/media/w9968cf.c +++ b/drivers/usb/media/w9968cf.c @@ -3554,7 +3554,7 @@ w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) /* Allocate 2 bytes of memory for camera control USB transfers */ - if (!(cam->control_buffer = (u16*)kmalloc(2, GFP_KERNEL))) { + if (!(cam->control_buffer = kmalloc(2, GFP_KERNEL))) { DBG(1,"Couldn't allocate memory for camera control transfers") err = -ENOMEM; goto fail; @@ -3562,7 +3562,7 @@ w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) memset(cam->control_buffer, 0, 2); /* Allocate 8 bytes of memory for USB data transfers to the FSB */ - if (!(cam->data_buffer = (u16*)kmalloc(8, GFP_KERNEL))) { + if (!(cam->data_buffer = kmalloc(8, GFP_KERNEL))) { DBG(1, "Couldn't allocate memory for data " "transfers to the FSB") err = -ENOMEM; diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c index fad387f21891..449b2501acf3 100644 --- a/drivers/usb/misc/auerswald.c +++ b/drivers/usb/misc/auerswald.c @@ -767,7 +767,7 @@ static int auerbuf_setup (pauerbufctl_t bcp, unsigned int numElements, unsigned memset (bep, 0, sizeof (auerbuf_t)); bep->list = bcp; INIT_LIST_HEAD (&bep->buff_list); - bep->bufp = (char *) kmalloc (bufsize, GFP_KERNEL); + bep->bufp = kmalloc (bufsize, GFP_KERNEL); if (!bep->bufp) goto bl_fail; bep->dr = (struct usb_ctrlrequest *) kmalloc (sizeof (struct usb_ctrlrequest), GFP_KERNEL); @@ -1123,7 +1123,7 @@ static int auerswald_int_open (pauerswald_t cp) } } if (!cp->intbufp) { - cp->intbufp = (char *) kmalloc (irqsize, GFP_KERNEL); + cp->intbufp = kmalloc (irqsize, GFP_KERNEL); if (!cp->intbufp) { ret = -ENOMEM; goto intoend; diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index b9d66074b80c..384fa3769805 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -465,14 +465,14 @@ static int probe_rio(struct usb_interface *intf, rio->rio_dev = dev; - if (!(rio->obuf = (char *) kmalloc(OBUF_SIZE, GFP_KERNEL))) { + if (!(rio->obuf = kmalloc(OBUF_SIZE, GFP_KERNEL))) { err("probe_rio: Not enough memory for the output buffer"); usb_deregister_dev(intf, &usb_rio_class); return -ENOMEM; } dbg("probe_rio: obuf address:%p", rio->obuf); - if (!(rio->ibuf = (char *) kmalloc(IBUF_SIZE, GFP_KERNEL))) { + if (!(rio->ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL))) { err("probe_rio: Not enough memory for the input buffer"); usb_deregister_dev(intf, &usb_rio_class); kfree(rio->obuf); -- cgit v1.2.3 From 6b495f4c5accec6261f522ea6898580dc9cb6316 Mon Sep 17 00:00:00 2001 From: Daniel Marjamäki Date: Tue, 13 Dec 2005 15:30:20 +0200 Subject: [PATCH] USB: isp116x-hcd.c: Removed unused variable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Removed unused variable Signed-off-by: Daniel Marjamäki Signed-off-by: Olav Kongas Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp116x-hcd.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 83447919202f..584b8dc65119 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -154,13 +154,11 @@ static void pack_fifo(struct isp116x *isp116x) struct ptd *ptd; int buflen = isp116x->atl_last_dir == PTD_DIR_IN ? isp116x->atl_bufshrt : isp116x->atl_buflen; - int ptd_count = 0; isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT); isp116x_write_reg16(isp116x, HCXFERCTR, buflen); isp116x_write_addr(isp116x, HCATLPORT | ISP116x_WRITE_OFFSET); for (ep = isp116x->atl_active; ep; ep = ep->active) { - ++ptd_count; ptd = &ep->ptd; dump_ptd(ptd); dump_ptd_out_data(ptd, ep->data); -- cgit v1.2.3 From 2c26c9e6b4993a1a1231849feff4b6518a4fc239 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Sat, 17 Dec 2005 02:16:43 -0800 Subject: [PATCH] USB: ub 00 implement retries and resets Implement command retries and resets in ub. It is advantageous for users to know if their devices are getting bad. However, failing every I/O is not practical if you have a external USB enclosure with a hard drive. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/block/ub.c | 404 +++++++++++++++++++++++++++++++++++++---------------- 1 file changed, 287 insertions(+), 117 deletions(-) diff --git a/drivers/block/ub.c b/drivers/block/ub.c index c7a28f5be42f..ba05e31709d5 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -9,7 +9,6 @@ * * TODO (sorted by decreasing priority) * -- Kill first_open (Al Viro fixed the block layer now) - * -- Do resets with usb_device_reset (needs a thread context, use khubd) * -- set readonly flag for CDs, set removable flag for CF readers * -- do inquiry and verify we got a disk and not a tape (for LUN mismatch) * -- special case some senses, e.g. 3a/0 -> no media present, reduce retries @@ -236,6 +235,13 @@ struct ub_scsi_cmd { void *back; }; +struct ub_request { + struct request *rq; + unsigned int current_try; + unsigned int nsg; /* sgv[nsg] */ + struct scatterlist sgv[UB_MAX_REQ_SG]; +}; + /* */ struct ub_capacity { @@ -331,6 +337,8 @@ struct ub_lun { int readonly; int first_open; /* Kludge. See ub_bd_open. */ + struct ub_request urq; + /* Use Ingo's mempool if or when we have more than one command. */ /* * Currently we never need more than one command for the whole device. @@ -351,6 +359,7 @@ struct ub_dev { atomic_t poison; /* The USB device is disconnected */ int openc; /* protected by ub_lock! */ /* kref is too implicit for our taste */ + int reset; /* Reset is running */ unsigned int tagcnt; char name[12]; struct usb_device *dev; @@ -378,6 +387,9 @@ struct ub_dev { struct bulk_cs_wrap work_bcs; struct usb_ctrlrequest work_cr; + struct work_struct reset_work; + wait_queue_head_t reset_wait; + int sg_stat[6]; struct ub_scsi_trace tr; }; @@ -386,12 +398,14 @@ struct ub_dev { */ static void ub_cleanup(struct ub_dev *sc); static int ub_request_fn_1(struct ub_lun *lun, struct request *rq); -static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, - struct ub_scsi_cmd *cmd, struct request *rq); -static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, - struct ub_scsi_cmd *cmd, struct request *rq); +static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, + struct ub_scsi_cmd *cmd, struct ub_request *urq); +static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, + struct ub_scsi_cmd *cmd, struct ub_request *urq); static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd); static void ub_end_rq(struct request *rq, int uptodate); +static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun, + struct ub_request *urq, struct ub_scsi_cmd *cmd); static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd); static void ub_urb_complete(struct urb *urb, struct pt_regs *pt); static void ub_scsi_action(unsigned long _dev); @@ -406,6 +420,8 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd); static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int stalled_pipe); static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd); +static void ub_reset_enter(struct ub_dev *sc); +static void ub_reset_task(void *arg); static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun); static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun, struct ub_capacity *ret); @@ -517,6 +533,9 @@ static ssize_t ub_diag_show(struct device *dev, struct device_attribute *attr, cnt = 0; spin_lock_irqsave(&sc->lock, flags); + cnt += sprintf(page + cnt, + "poison %d reset %d\n", + atomic_read(&sc->poison), sc->reset); cnt += sprintf(page + cnt, "qlen %d qmax %d\n", sc->cmd_queue.qlen, sc->cmd_queue.qmax); @@ -766,7 +785,8 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq) { struct ub_dev *sc = lun->udev; struct ub_scsi_cmd *cmd; - int rc; + struct ub_request *urq; + int n_elem; if (atomic_read(&sc->poison) || lun->changed) { blkdev_dequeue_request(rq); @@ -774,65 +794,70 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq) return 0; } + if (lun->urq.rq != NULL) + return -1; if ((cmd = ub_get_cmd(lun)) == NULL) return -1; memset(cmd, 0, sizeof(struct ub_scsi_cmd)); blkdev_dequeue_request(rq); + + urq = &lun->urq; + memset(urq, 0, sizeof(struct ub_request)); + urq->rq = rq; + + /* + * get scatterlist from block layer + */ + n_elem = blk_rq_map_sg(lun->disk->queue, rq, &urq->sgv[0]); + if (n_elem < 0) { + printk(KERN_INFO "%s: failed request map (%d)\n", + lun->name, n_elem); /* P3 */ + goto drop; + } + if (n_elem > UB_MAX_REQ_SG) { /* Paranoia */ + printk(KERN_WARNING "%s: request with %d segments\n", + lun->name, n_elem); + goto drop; + } + urq->nsg = n_elem; + sc->sg_stat[n_elem < 5 ? n_elem : 5]++; + if (blk_pc_request(rq)) { - rc = ub_cmd_build_packet(sc, lun, cmd, rq); + ub_cmd_build_packet(sc, lun, cmd, urq); } else { - rc = ub_cmd_build_block(sc, lun, cmd, rq); - } - if (rc != 0) { - ub_put_cmd(lun, cmd); - ub_end_rq(rq, 0); - return 0; + ub_cmd_build_block(sc, lun, cmd, urq); } cmd->state = UB_CMDST_INIT; cmd->lun = lun; cmd->done = ub_rw_cmd_done; - cmd->back = rq; + cmd->back = urq; cmd->tag = sc->tagcnt++; - if (ub_submit_scsi(sc, cmd) != 0) { - ub_put_cmd(lun, cmd); - ub_end_rq(rq, 0); - return 0; - } + if (ub_submit_scsi(sc, cmd) != 0) + goto drop; + + return 0; +drop: + ub_put_cmd(lun, cmd); + ub_end_rq(rq, 0); return 0; } -static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, - struct ub_scsi_cmd *cmd, struct request *rq) +static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, + struct ub_scsi_cmd *cmd, struct ub_request *urq) { - int ub_dir; - int n_elem; + struct request *rq = urq->rq; unsigned int block, nblks; if (rq_data_dir(rq) == WRITE) - ub_dir = UB_DIR_WRITE; + cmd->dir = UB_DIR_WRITE; else - ub_dir = UB_DIR_READ; - cmd->dir = ub_dir; + cmd->dir = UB_DIR_READ; - /* - * get scatterlist from block layer - */ - n_elem = blk_rq_map_sg(lun->disk->queue, rq, &cmd->sgv[0]); - if (n_elem <= 0) { - printk(KERN_INFO "%s: failed request map (%d)\n", - sc->name, n_elem); /* P3 */ - return -1; /* request with no s/g entries? */ - } - if (n_elem > UB_MAX_REQ_SG) { /* Paranoia */ - printk(KERN_WARNING "%s: request with %d segments\n", - sc->name, n_elem); - return -1; - } - cmd->nsg = n_elem; - sc->sg_stat[n_elem < 5 ? n_elem : 5]++; + cmd->nsg = urq->nsg; + memcpy(cmd->sgv, urq->sgv, sizeof(struct scatterlist) * cmd->nsg); /* * build the command @@ -843,7 +868,7 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, block = rq->sector >> lun->capacity.bshift; nblks = rq->nr_sectors >> lun->capacity.bshift; - cmd->cdb[0] = (ub_dir == UB_DIR_READ)? READ_10: WRITE_10; + cmd->cdb[0] = (cmd->dir == UB_DIR_READ)? READ_10: WRITE_10; /* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */ cmd->cdb[2] = block >> 24; cmd->cdb[3] = block >> 16; @@ -854,14 +879,12 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, cmd->cdb_len = 10; cmd->len = rq->nr_sectors * 512; - - return 0; } -static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, - struct ub_scsi_cmd *cmd, struct request *rq) +static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, + struct ub_scsi_cmd *cmd, struct ub_request *urq) { - int n_elem; + struct request *rq = urq->rq; if (rq->data_len == 0) { cmd->dir = UB_DIR_NONE; @@ -870,40 +893,26 @@ static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, cmd->dir = UB_DIR_WRITE; else cmd->dir = UB_DIR_READ; - } - /* - * get scatterlist from block layer - */ - n_elem = blk_rq_map_sg(lun->disk->queue, rq, &cmd->sgv[0]); - if (n_elem < 0) { - printk(KERN_INFO "%s: failed request map (%d)\n", - sc->name, n_elem); /* P3 */ - return -1; - } - if (n_elem > UB_MAX_REQ_SG) { /* Paranoia */ - printk(KERN_WARNING "%s: request with %d segments\n", - sc->name, n_elem); - return -1; - } - cmd->nsg = n_elem; - sc->sg_stat[n_elem < 5 ? n_elem : 5]++; + cmd->nsg = urq->nsg; + memcpy(cmd->sgv, urq->sgv, sizeof(struct scatterlist) * cmd->nsg); memcpy(&cmd->cdb, rq->cmd, rq->cmd_len); cmd->cdb_len = rq->cmd_len; cmd->len = rq->data_len; - - return 0; } static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) { - struct request *rq = cmd->back; struct ub_lun *lun = cmd->lun; + struct ub_request *urq = cmd->back; + struct request *rq; int uptodate; + rq = urq->rq; + if (cmd->error == 0) { uptodate = 1; @@ -924,9 +933,16 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) rq->errors = SAM_STAT_CHECK_CONDITION; else rq->errors = DID_ERROR << 16; + } else { + if (cmd->error == -EIO) { + if (ub_rw_cmd_retry(sc, lun, urq, cmd) == 0) + return; + } } } + urq->rq = NULL; + ub_put_cmd(lun, cmd); ub_end_rq(rq, uptodate); blk_start_queue(lun->disk->queue); @@ -941,6 +957,41 @@ static void ub_end_rq(struct request *rq, int uptodate) end_that_request_last(rq); } +static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun, + struct ub_request *urq, struct ub_scsi_cmd *cmd) +{ + + if (atomic_read(&sc->poison)) + return -ENXIO; + + ub_reset_enter(sc); + + if (urq->current_try >= 3) + return -EIO; + urq->current_try++; + /* P3 */ printk("%s: dir %c len/act %d/%d " + "[sense %x %02x %02x] retry %d\n", + sc->name, UB_DIR_CHAR(cmd->dir), cmd->len, cmd->act_len, + cmd->key, cmd->asc, cmd->ascq, urq->current_try); + + memset(cmd, 0, sizeof(struct ub_scsi_cmd)); + ub_cmd_build_block(sc, lun, cmd, urq); + + cmd->state = UB_CMDST_INIT; + cmd->lun = lun; + cmd->done = ub_rw_cmd_done; + cmd->back = urq; + + cmd->tag = sc->tagcnt++; + +#if 0 /* Wasteful */ + return ub_submit_scsi(sc, cmd); +#else + ub_cmdq_add(sc, cmd); + return 0; +#endif +} + /* * Submit a regular SCSI operation (not an auto-sense). * @@ -1071,7 +1122,7 @@ static void ub_scsi_dispatch(struct ub_dev *sc) struct ub_scsi_cmd *cmd; int rc; - while ((cmd = ub_cmdq_peek(sc)) != NULL) { + while (!sc->reset && (cmd = ub_cmdq_peek(sc)) != NULL) { if (cmd->state == UB_CMDST_DONE) { ub_cmdq_pop(sc); (*cmd->done)(sc, cmd); @@ -1094,11 +1145,12 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) { struct urb *urb = &sc->work_urb; struct bulk_cs_wrap *bcs; + int len; int rc; if (atomic_read(&sc->poison)) { - /* A little too simplistic, I feel... */ - goto Bad_End; + ub_state_done(sc, cmd, -ENODEV); + return; } if (cmd->state == UB_CMDST_CLEAR) { @@ -1106,7 +1158,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) /* * STALL while clearning STALL. * The control pipe clears itself - nothing to do. - * XXX Might try to reset the device here and retry. */ printk(KERN_NOTICE "%s: stall on control pipe\n", sc->name); @@ -1125,11 +1176,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) } else if (cmd->state == UB_CMDST_CLR2STS) { if (urb->status == -EPIPE) { - /* - * STALL while clearning STALL. - * The control pipe clears itself - nothing to do. - * XXX Might try to reset the device here and retry. - */ printk(KERN_NOTICE "%s: stall on control pipe\n", sc->name); goto Bad_End; @@ -1147,11 +1193,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) } else if (cmd->state == UB_CMDST_CLRRS) { if (urb->status == -EPIPE) { - /* - * STALL while clearning STALL. - * The control pipe clears itself - nothing to do. - * XXX Might try to reset the device here and retry. - */ printk(KERN_NOTICE "%s: stall on control pipe\n", sc->name); goto Bad_End; @@ -1168,7 +1209,12 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) ub_state_stat_counted(sc, cmd); } else if (cmd->state == UB_CMDST_CMD) { - if (urb->status == -EPIPE) { + switch (urb->status) { + case 0: + break; + case -EOVERFLOW: + goto Bad_End; + case -EPIPE: rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe); if (rc != 0) { printk(KERN_NOTICE "%s: " @@ -1178,17 +1224,20 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * This is typically ENOMEM or some other such shit. * Retrying is pointless. Just do Bad End on it... */ - goto Bad_End; + ub_state_done(sc, cmd, rc); + return; } cmd->state = UB_CMDST_CLEAR; ub_cmdtr_state(sc, cmd); return; - } - if (urb->status != 0) { + case -ESHUTDOWN: /* unplug */ + case -EILSEQ: /* unplug timeout on uhci */ + ub_state_done(sc, cmd, -ENODEV); + return; + default: goto Bad_End; } if (urb->actual_length != US_BULK_CB_WRAP_LEN) { - /* XXX Must do reset here to unconfuse the device */ goto Bad_End; } @@ -1207,11 +1256,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) printk(KERN_NOTICE "%s: " "unable to submit clear (%d)\n", sc->name, rc); - /* - * This is typically ENOMEM or some other such shit. - * Retrying is pointless. Just do Bad End on it... - */ - goto Bad_End; + ub_state_done(sc, cmd, rc); + return; } cmd->state = UB_CMDST_CLR2STS; ub_cmdtr_state(sc, cmd); @@ -1220,14 +1266,50 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) if (urb->status == -EOVERFLOW) { /* * A babble? Failure, but we must transfer CSW now. - * XXX This is going to end in perpetual babble. Reset. */ cmd->error = -EOVERFLOW; /* A cheap trick... */ ub_state_stat(sc, cmd); return; } - if (urb->status != 0) - goto Bad_End; + + if (cmd->dir == UB_DIR_WRITE) { + /* + * Do not continue writes in case of a failure. + * Doing so would cause sectors to be mixed up, + * which is worse than sectors lost. + * + * We must try to read the CSW, or many devices + * get confused. + */ + len = urb->actual_length; + if (urb->status != 0 || + len != cmd->sgv[cmd->current_sg].length) { + cmd->act_len += len; + ub_cmdtr_act_len(sc, cmd); + + cmd->error = -EIO; + ub_state_stat(sc, cmd); + return; + } + + } else { + /* + * If an error occurs on read, we record it, and + * continue to fetch data in order to avoid bubble. + * + * As a small shortcut, we stop if we detect that + * a CSW mixed into data. + */ + if (urb->status != 0) + cmd->error = -EIO; + + len = urb->actual_length; + if (urb->status != 0 || + len != cmd->sgv[cmd->current_sg].length) { + if ((len & 0x1FF) == US_BULK_CS_WRAP_LEN) + goto Bad_End; + } + } cmd->act_len += urb->actual_length; ub_cmdtr_act_len(sc, cmd); @@ -1245,11 +1327,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) printk(KERN_NOTICE "%s: " "unable to submit clear (%d)\n", sc->name, rc); - /* - * This is typically ENOMEM or some other such shit. - * Retrying is pointless. Just do Bad End on it... - */ - goto Bad_End; + ub_state_done(sc, cmd, rc); + return; } /* @@ -1262,14 +1341,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) ub_cmdtr_state(sc, cmd); return; } - if (urb->status == -EOVERFLOW) { - /* - * XXX We are screwed here. Retrying is pointless, - * because the pipelined data will not get in until - * we read with a big enough buffer. We must reset XXX. - */ - goto Bad_End; - } + + /* Catch everything, including -EOVERFLOW and other nasties. */ if (urb->status != 0) goto Bad_End; @@ -1315,15 +1388,15 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) return; } - rc = le32_to_cpu(bcs->Residue); - if (rc != cmd->len - cmd->act_len) { + len = le32_to_cpu(bcs->Residue); + if (len != cmd->len - cmd->act_len) { /* * It is all right to transfer less, the caller has * to check. But it's not all right if the device * counts disagree with our counts. */ /* P3 */ printk("%s: resid %d len %d act %d\n", - sc->name, rc, cmd->len, cmd->act_len); + sc->name, len, cmd->len, cmd->act_len); goto Bad_End; } @@ -1334,13 +1407,13 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) ub_state_sense(sc, cmd); return; case US_BULK_STAT_PHASE: - /* XXX We must reset the transport here */ /* P3 */ printk("%s: status PHASE\n", sc->name); goto Bad_End; default: printk(KERN_INFO "%s: unknown CSW status 0x%x\n", sc->name, bcs->Status); - goto Bad_End; + ub_state_done(sc, cmd, -EINVAL); + return; } /* Not zeroing error to preserve a babble indicator */ @@ -1360,7 +1433,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) printk(KERN_WARNING "%s: " "wrong command state %d\n", sc->name, cmd->state); - goto Bad_End; + ub_state_done(sc, cmd, -EINVAL); + return; } return; @@ -1607,6 +1681,93 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd) ub_scsi_urb_compl(sc, cmd); } +/* + * Reset management + */ + +static void ub_reset_enter(struct ub_dev *sc) +{ + + if (sc->reset) { + /* This happens often on multi-LUN devices. */ + return; + } + sc->reset = 1; + +#if 0 /* Not needed because the disconnect waits for us. */ + unsigned long flags; + spin_lock_irqsave(&ub_lock, flags); + sc->openc++; + spin_unlock_irqrestore(&ub_lock, flags); +#endif + +#if 0 /* We let them stop themselves. */ + struct list_head *p; + struct ub_lun *lun; + list_for_each(p, &sc->luns) { + lun = list_entry(p, struct ub_lun, link); + blk_stop_queue(lun->disk->queue); + } +#endif + + schedule_work(&sc->reset_work); +} + +static void ub_reset_task(void *arg) +{ + struct ub_dev *sc = arg; + unsigned long flags; + struct list_head *p; + struct ub_lun *lun; + int lkr, rc; + + if (!sc->reset) { + printk(KERN_WARNING "%s: Running reset unrequested\n", + sc->name); + return; + } + + if (atomic_read(&sc->poison)) { + printk(KERN_NOTICE "%s: Not resetting disconnected device\n", + sc->name); /* P3 This floods. Remove soon. XXX */ + } else if (sc->dev->actconfig->desc.bNumInterfaces != 1) { + printk(KERN_NOTICE "%s: Not resetting multi-interface device\n", + sc->name); /* P3 This floods. Remove soon. XXX */ + } else { + if ((lkr = usb_lock_device_for_reset(sc->dev, sc->intf)) < 0) { + printk(KERN_NOTICE + "%s: usb_lock_device_for_reset failed (%d)\n", + sc->name, lkr); + } else { + rc = usb_reset_device(sc->dev); + if (rc < 0) { + printk(KERN_NOTICE "%s: " + "usb_lock_device_for_reset failed (%d)\n", + sc->name, rc); + } + + if (lkr) + usb_unlock_device(sc->dev); + } + } + + /* + * In theory, no commands can be running while reset is active, + * so nobody can ask for another reset, and so we do not need any + * queues of resets or anything. We do need a spinlock though, + * to interact with block layer. + */ + spin_lock_irqsave(&sc->lock, flags); + sc->reset = 0; + tasklet_schedule(&sc->tasklet); + list_for_each(p, &sc->luns) { + lun = list_entry(p, struct ub_lun, link); + blk_start_queue(lun->disk->queue); + } + wake_up(&sc->reset_wait); + spin_unlock_irqrestore(&sc->lock, flags); +} + /* * This is called from a process context. */ @@ -2142,7 +2303,7 @@ static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev, if (ep_in == NULL || ep_out == NULL) { printk(KERN_NOTICE "%s: failed endpoint check\n", sc->name); - return -EIO; + return -ENODEV; } /* Calculate and store the pipe values */ @@ -2180,6 +2341,8 @@ static int ub_probe(struct usb_interface *intf, usb_init_urb(&sc->work_urb); tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc); atomic_set(&sc->poison, 0); + INIT_WORK(&sc->reset_work, ub_reset_task, sc); + init_waitqueue_head(&sc->reset_wait); init_timer(&sc->work_timer); sc->work_timer.data = (unsigned long) sc; @@ -2200,7 +2363,8 @@ static int ub_probe(struct usb_interface *intf, /* XXX Verify that we can handle the device (from descriptors) */ - ub_get_pipes(sc, sc->dev, intf); + if (ub_get_pipes(sc, sc->dev, intf) != 0) + goto err_dev_desc; if (device_create_file(&sc->intf->dev, &dev_attr_diag) != 0) goto err_diag; @@ -2271,6 +2435,7 @@ static int ub_probe(struct usb_interface *intf, /* device_remove_file(&sc->intf->dev, &dev_attr_diag); */ err_diag: +err_dev_desc: usb_set_intfdata(intf, NULL); // usb_put_intf(sc->intf); usb_put_dev(sc->dev); @@ -2378,6 +2543,11 @@ static void ub_disconnect(struct usb_interface *intf) */ atomic_set(&sc->poison, 1); + /* + * Wait for reset to end, if any. + */ + wait_event(sc->reset_wait, !sc->reset); + /* * Blow away queued commands. * @@ -2391,7 +2561,7 @@ static void ub_disconnect(struct usb_interface *intf) { struct ub_scsi_cmd *cmd; int cnt = 0; - while ((cmd = ub_cmdq_pop(sc)) != NULL) { + while ((cmd = ub_cmdq_peek(sc)) != NULL) { cmd->error = -ENOTCONN; cmd->state = UB_CMDST_DONE; ub_cmdtr_state(sc, cmd); -- cgit v1.2.3 From 4fb729f5863c29e4466afb4508186303f46458e7 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Sat, 17 Dec 2005 02:34:12 -0800 Subject: [PATCH] USB: ub 01 rename Rename misleading UB_MINORS_PER_MAJOR into UB_PARTS_PER_LUN. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/block/ub.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/block/ub.c b/drivers/block/ub.c index ba05e31709d5..813805908dec 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -115,7 +115,7 @@ /* */ -#define UB_MINORS_PER_MAJOR 8 +#define UB_PARTS_PER_LUN 8 #define UB_MAX_CDB_SIZE 16 /* Corresponds to Bulk */ @@ -2473,14 +2473,14 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum) ub_revalidate(sc, lun); rc = -ENOMEM; - if ((disk = alloc_disk(UB_MINORS_PER_MAJOR)) == NULL) + if ((disk = alloc_disk(UB_PARTS_PER_LUN)) == NULL) goto err_diskalloc; lun->disk = disk; sprintf(disk->disk_name, DRV_NAME "%c", lun->id + 'a'); sprintf(disk->devfs_name, DEVFS_NAME "/%c", lun->id + 'a'); disk->major = UB_MAJOR; - disk->first_minor = lun->id * UB_MINORS_PER_MAJOR; + disk->first_minor = lun->id * UB_PARTS_PER_LUN; disk->fops = &ub_bd_fops; disk->private_data = lun; disk->driverfs_dev = &sc->intf->dev; -- cgit v1.2.3 From ab93091dd7f3d3dff9e8d1811d8344af1c52493b Mon Sep 17 00:00:00 2001 From: Daniel Marjamaki Date: Sat, 17 Dec 2005 02:38:46 -0800 Subject: [PATCH] USB: ub 02 Removed unused variable Removed an unused variable Signed-off-by: Daniel Marjamaki Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/block/ub.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/block/ub.c b/drivers/block/ub.c index 813805908dec..10740a065088 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -950,10 +950,7 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) static void ub_end_rq(struct request *rq, int uptodate) { - int rc; - - rc = end_that_request_first(rq, uptodate, rq->hard_nr_sectors); - // assert(rc == 0); + end_that_request_first(rq, uptodate, rq->hard_nr_sectors); end_that_request_last(rq); } -- cgit v1.2.3 From 3e220e9505f3c993b666b5e22b1c466b69ee4f54 Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Sun, 18 Dec 2005 21:30:02 -0800 Subject: [PATCH] USB Storage: Fix unusual_devs.h order Alan Stern pointed out there was an ordering issue in unusual_devs.h, and this patch fixes it. Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 7a865dd04683..dc301e567cfc 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -79,13 +79,6 @@ UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001, US_SC_8070, US_PR_USBAT, init_usbat, 0), #endif -/* Patch submitted by Mihnea-Costin Grigore */ -UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003, - "VIA Technologies Inc.", - "USB 2.0 Card Reader", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_IGNORE_RESIDUE ), - /* Reported by Sebastian Kapfer * and Olaf Hering (different bcd's, same vendor/product) * for USB floppies that need the SINGLE_LUN enforcement. @@ -96,6 +89,13 @@ UNUSUAL_DEV( 0x0409, 0x0040, 0x0000, 0x9999, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), +/* Patch submitted by Mihnea-Costin Grigore */ +UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003, + "VIA Technologies Inc.", + "USB 2.0 Card Reader", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* Deduced by Jonathan Woithe * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message * always fails and confuses drive. -- cgit v1.2.3 From 5e0f76c6bbc0d26cd9625876f7beeb7b002f39bf Mon Sep 17 00:00:00 2001 From: David Hollis Date: Mon, 19 Dec 2005 13:58:38 -0500 Subject: [PATCH] USB: asix.c - Add Linksys USB200M Rev 2 ids Attached patch adds device IDs for the Linksys USB200M Rev 2 device which uses the AX88772 chipset. Signed-off-by: David Hollis Signed-off-by: Greg Kroah-Hartman --- drivers/usb/net/asix.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c index 2faf2f2bdcdd..541181695040 100644 --- a/drivers/usb/net/asix.c +++ b/drivers/usb/net/asix.c @@ -912,6 +912,10 @@ static const struct usb_device_id products [] = { // ASIX AX88772 10/100 USB_DEVICE (0x0b95, 0x7720), .driver_info = (unsigned long) &ax88772_info, +}, { + // Linksys USB200M Rev 2 + USB_DEVICE (0x13b1, 0x0018), + .driver_info = (unsigned long) &ax88772_info, }, { }, // END }; -- cgit v1.2.3 From aafbf24a1129480157af7ee780eddcea9b76ee5c Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Tue, 20 Dec 2005 14:15:04 -0800 Subject: [PATCH] USB: replace __setup("nousb") with __module_param_call Fedora users complain that passing "nousbstorage" to the installer causes the rest of the USB support to disappear. The installer uses kernel command line as a way to pass options through Syslinux. The problem stems from the use of strncmp() in obsolete_checksetup(). I used __module_param_call() instead of module_param because I wanted to preserve the old syntax in grub.conf, and it's the only macro which allows to remove the prefix. The fix is tested to accept the option "nousb" correctly now. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/usb.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 39e6b61b898a..6ee2b5359a83 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -46,7 +46,6 @@ const char *usbcore_name = "usbcore"; static int nousb; /* Disable USB when built into kernel image */ - /* Not honored on modular build */ /** @@ -1096,18 +1095,8 @@ struct bus_type usb_bus_type = { .resume = usb_generic_resume, }; -#ifndef MODULE - -static int __init usb_setup_disable(char *str) -{ - nousb = 1; - return 1; -} - /* format to disable USB on kernel command line is: nousb */ -__setup("nousb", usb_setup_disable); - -#endif +__module_param_call("", nousb, param_set_bool, param_get_bool, &nousb, 0444); /* * for external read access to -- cgit v1.2.3 From ff90651883093576de2d60bebaae39b0dd2e62f6 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 21 Dec 2005 19:27:29 +0100 Subject: [PATCH] USB: Limiting of resource use in skeleton driver this introduces limits whose lack in the skeleton driver someone recently complained about. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usb-skeleton.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index 60c458ebaa2d..719d23a4ac51 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -39,10 +39,15 @@ MODULE_DEVICE_TABLE (usb, skel_table); /* Get a minor range for your devices from the usb maintainer */ #define USB_SKEL_MINOR_BASE 192 +/* our private defines. if this grows any larger, use your own .h file */ +#define MAX_TRANSFER ( PAGE_SIZE - 512 ) +#define WRITES_IN_FLIGHT 8 + /* Structure to hold all of our device specific stuff */ struct usb_skel { struct usb_device * udev; /* the usb device for this device */ struct usb_interface * interface; /* the interface for this device */ + struct semaphore limit_sem; /* limiting the number of writes in progress */ unsigned char * bulk_in_buffer; /* the buffer to receive data */ size_t bulk_in_size; /* the size of the receive buffer */ __u8 bulk_in_endpointAddr; /* the address of the bulk in endpoint */ @@ -152,6 +157,7 @@ static void skel_write_bulk_callback(struct urb *urb, struct pt_regs *regs) /* free up our allocated buffer */ usb_buffer_free(urb->dev, urb->transfer_buffer_length, urb->transfer_buffer, urb->transfer_dma); + up(&dev->limit_sem); } static ssize_t skel_write(struct file *file, const char *user_buffer, size_t count, loff_t *ppos) @@ -160,6 +166,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou int retval = 0; struct urb *urb = NULL; char *buf = NULL; + size_t writesize = max(count, MAX_TRANSFER); dev = (struct usb_skel *)file->private_data; @@ -167,6 +174,9 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou if (count == 0) goto exit; + /* limit the number of URBs in flight to stop a user from using up all RAM */ + down (&dev->limit_sem); + /* create a urb, and a buffer for it, and copy the data to the urb */ urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) { @@ -174,13 +184,13 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou goto error; } - buf = usb_buffer_alloc(dev->udev, count, GFP_KERNEL, &urb->transfer_dma); + buf = usb_buffer_alloc(dev->udev, writesize, GFP_KERNEL, &urb->transfer_dma); if (!buf) { retval = -ENOMEM; goto error; } - if (copy_from_user(buf, user_buffer, count)) { + if (copy_from_user(buf, user_buffer, writesize)) { retval = -EFAULT; goto error; } @@ -188,7 +198,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou /* initialize the urb properly */ usb_fill_bulk_urb(urb, dev->udev, usb_sndbulkpipe(dev->udev, dev->bulk_out_endpointAddr), - buf, count, skel_write_bulk_callback, dev); + buf, writesize, skel_write_bulk_callback, dev); urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; /* send the data out the bulk port */ @@ -202,11 +212,12 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou usb_free_urb(urb); exit: - return count; + return writesize; error: - usb_buffer_free(dev->udev, count, buf, urb->transfer_dma); + usb_buffer_free(dev->udev, writesize, buf, urb->transfer_dma); usb_free_urb(urb); + up(&dev->limit_sem); return retval; } @@ -238,13 +249,13 @@ static int skel_probe(struct usb_interface *interface, const struct usb_device_i int retval = -ENOMEM; /* allocate memory for our device state and initialize it */ - dev = kmalloc(sizeof(*dev), GFP_KERNEL); + dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev == NULL) { err("Out of memory"); goto error; } - memset(dev, 0x00, sizeof(*dev)); kref_init(&dev->kref); + sema_init(&dev->limit_sem, WRITES_IN_FLIGHT); dev->udev = usb_get_dev(interface_to_usbdev(interface)); dev->interface = interface; -- cgit v1.2.3 From a083dec0ed537a75fbe8f2f83d198e9e672240d8 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Sun, 18 Dec 2005 23:41:38 -0600 Subject: [PATCH] USB: zd1201: make sysfs device symlink Noticed that my zd1201 adapter isn't "seen" by hal and NetworkManager. The problem seems to be that unlike other network device drivers I checked, zd1201 does not do a SET_NETDEV_DEV(), which makes it so a "device" symlink is created under /sys/class/net/wlan0. With the following patch the device symlink shows up, and now I am happily using NetworkManager to control the adapter: $ ls -l /sys/class/net/wlan0 total 0 -r--r--r-- 1 root root 4096 Dec 18 13:42 address -r--r--r-- 1 root root 4096 Dec 18 13:42 addr_len -r--r--r-- 1 root root 4096 Dec 18 13:42 broadcast -r--r--r-- 1 root root 4096 Dec 18 13:42 carrier lrwxrwxrwx 1 root root 0 Dec 18 13:42 device -> ../../../devices/pci0001:10/0001:10:1b.1/usb4/4-1 -r--r--r-- 1 root root 4096 Dec 18 13:42 features Signed-off-by: Nathan Lynch Signed-off-by: Greg Kroah-Hartman --- drivers/usb/net/zd1201.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c index 2af21a620c07..f3a8e2807c3b 100644 --- a/drivers/usb/net/zd1201.c +++ b/drivers/usb/net/zd1201.c @@ -1829,6 +1829,8 @@ static int zd1201_probe(struct usb_interface *interface, if (err) goto err_net; + SET_NETDEV_DEV(zd->dev, &usb->dev); + err = register_netdev(zd->dev); if (err) goto err_net; -- cgit v1.2.3 From 318e479eb7ad9a948c6da381976d258464413816 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Wed, 21 Dec 2005 17:03:24 -0800 Subject: [PATCH] USB: ioctl compat for usblp.c From: David Woodhouse David has a G5 with a printer. I am quite surprised that nobody else noticed this before. Linus has a G5. Hackers hate printing in general, maybe. We do not use BKL anymore, because one of code paths had a sleeping call, so we had to use a semaphore. I am sure it's safe to use unlocked_ioctl. The new ioctls return long and retval is int. It looks completely fine to me. We never want these extra bits, and the sign extension ought to work right. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman -- --- drivers/usb/class/usblp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 6918037e209c..708a292e5a0d 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -438,7 +438,7 @@ static unsigned int usblp_poll(struct file *file, struct poll_table_struct *wait | (!usblp->wcomplete ? 0 : POLLOUT | POLLWRNORM); } -static int usblp_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { struct usblp *usblp = file->private_data; int length, err, i; @@ -838,7 +838,8 @@ static struct file_operations usblp_fops = { .read = usblp_read, .write = usblp_write, .poll = usblp_poll, - .ioctl = usblp_ioctl, + .unlocked_ioctl = usblp_ioctl, + .compat_ioctl = usblp_ioctl, .open = usblp_open, .release = usblp_release, }; -- cgit v1.2.3 From a9714c845c0681a203a9ae22aa5165ec72c51d33 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 23 Dec 2005 16:41:41 +0000 Subject: [PATCH] USB: Export IEEE-1284 device id in sysfs for usblp devices I looked at the userspace code which uses the LPIOC_GET_DEVICE_ID ioctl and I almost went blind. Let's export it in sysfs instead, and just as a string instead of with a big-endian length at the beginning of it. This also prints the message about finding the printer _after_ we know the minor device number it's going to have, rather than reporting all printers as 'usblp0'. Signed-off-by: David Woodhouse Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/usblp.c | 35 ++++++++++++++++++++++++++--------- 1 file changed, 26 insertions(+), 9 deletions(-) diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 708a292e5a0d..27e9404547f3 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -850,6 +850,20 @@ static struct usb_class_driver usblp_class = { .minor_base = USBLP_MINOR_BASE, }; +static ssize_t usblp_show_ieee1284_id(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usblp *usblp = usb_get_intfdata (intf); + + if (usblp->device_id_string[0] == 0 && + usblp->device_id_string[1] == 0) + return 0; + + return sprintf(buf, "%s", usblp->device_id_string+2); +} + +static DEVICE_ATTR(ieee1284_id, S_IRUGO, usblp_show_ieee1284_id, NULL); + static int usblp_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -934,20 +948,12 @@ static int usblp_probe(struct usb_interface *intf, /* Retrieve and store the device ID string. */ usblp_cache_device_id_string(usblp); + device_create_file(&intf->dev, &dev_attr_ieee1284_id); #ifdef DEBUG usblp_check_status(usblp, 0); #endif - info("usblp%d: USB %sdirectional printer dev %d " - "if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X", - usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum, - usblp->ifnum, - usblp->protocol[usblp->current_protocol].alt_setting, - usblp->current_protocol, - le16_to_cpu(usblp->dev->descriptor.idVendor), - le16_to_cpu(usblp->dev->descriptor.idProduct)); - usb_set_intfdata (intf, usblp); usblp->present = 1; @@ -958,11 +964,20 @@ static int usblp_probe(struct usb_interface *intf, goto abort_intfdata; } usblp->minor = intf->minor; + info("usblp%d: USB %sdirectional printer dev %d " + "if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X", + usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum, + usblp->ifnum, + usblp->protocol[usblp->current_protocol].alt_setting, + usblp->current_protocol, + le16_to_cpu(usblp->dev->descriptor.idVendor), + le16_to_cpu(usblp->dev->descriptor.idProduct)); return 0; abort_intfdata: usb_set_intfdata (intf, NULL); + device_remove_file(&intf->dev, &dev_attr_ieee1284_id); abort: if (usblp) { if (usblp->writebuf) @@ -1157,6 +1172,8 @@ static void usblp_disconnect(struct usb_interface *intf) BUG (); } + device_remove_file(&intf->dev, &dev_attr_ieee1284_id); + down (&usblp_sem); down (&usblp->sem); usblp->present = 0; -- cgit v1.2.3 From f5691d70d4aeec0ac9cff11f0cabb7d5a1735705 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Wed, 21 Dec 2005 17:24:54 -0800 Subject: [PATCH] USB: fix usb_find_interface for ppc64 Fix usb_find_interface. You cannot case pointers to int and long on a big-endian 64-bitter without consequences. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/usb.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 6ee2b5359a83..56a3520863a9 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -192,20 +192,23 @@ void usb_driver_release_interface(struct usb_driver *driver, iface->condition = USB_INTERFACE_UNBOUND; mark_quiesced(iface); } +struct find_interface_arg { + int minor; + struct usb_interface *interface; +}; static int __find_interface(struct device * dev, void * data) { - struct usb_interface ** ret = (struct usb_interface **)data; - struct usb_interface * intf = *ret; - int *minor = (int *)data; + struct find_interface_arg *arg = data; + struct usb_interface *intf; /* can't look at usb devices, only interfaces */ if (dev->driver == &usb_generic_driver) return 0; intf = to_usb_interface(dev); - if (intf->minor != -1 && intf->minor == *minor) { - *ret = intf; + if (intf->minor != -1 && intf->minor == arg->minor) { + arg->interface = intf; return 1; } return 0; @@ -222,12 +225,12 @@ static int __find_interface(struct device * dev, void * data) */ struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor) { - struct usb_interface *intf = (struct usb_interface *)(long)minor; - int ret; - - ret = driver_for_each_device(&drv->driver, NULL, &intf, __find_interface); + struct find_interface_arg argb; - return ret ? intf : NULL; + argb.minor = minor; + argb.interface = NULL; + driver_for_each_device(&drv->driver, NULL, &argb, __find_interface); + return argb.interface; } #ifdef CONFIG_HOTPLUG -- cgit v1.2.3 From cb5b3f6950b4fbad9d8d41756f49aba792804b5b Mon Sep 17 00:00:00 2001 From: Olav Kongas Date: Thu, 22 Dec 2005 12:44:52 +0200 Subject: [PATCH] USB: fix buffer size limiting in skeleton driver Fix buffer size limiting. Signed-off-by: Olav Kongas Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usb-skeleton.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index 719d23a4ac51..b6652ef56830 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -166,7 +166,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou int retval = 0; struct urb *urb = NULL; char *buf = NULL; - size_t writesize = max(count, MAX_TRANSFER); + size_t writesize = min(count, MAX_TRANSFER); dev = (struct usb_skel *)file->private_data; -- cgit v1.2.3 From c8dd7709c534ab0d713aa698c99132b6c812b57c Mon Sep 17 00:00:00 2001 From: Sam Bishop Date: Thu, 22 Dec 2005 17:11:02 -0700 Subject: [PATCH] USB: fix usb-skeleton limit resource usage patch. Prevents a compiler warning and uses down_interruptible() instead of down() in process context. Signed-off-by: Sam Bishop Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usb-skeleton.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index b6652ef56830..5d02f16b7d0e 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -166,7 +166,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou int retval = 0; struct urb *urb = NULL; char *buf = NULL; - size_t writesize = min(count, MAX_TRANSFER); + size_t writesize = min(count, (size_t)MAX_TRANSFER); dev = (struct usb_skel *)file->private_data; @@ -175,7 +175,10 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou goto exit; /* limit the number of URBs in flight to stop a user from using up all RAM */ - down (&dev->limit_sem); + if (down_interruptible(&dev->limit_sem)) { + retval = -ERESTARTSYS; + goto exit; + } /* create a urb, and a buffer for it, and copy the data to the urb */ urb = usb_alloc_urb(0, GFP_KERNEL); -- cgit v1.2.3