From bab389c8750d7f41f499517b308600f13bd2788d Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 28 Jan 2009 15:13:54 +0100
Subject: pcm037: use of new iomux implementation
This was only compilation tested.
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-mx3/pcm037.c | 28 +++++++++++++++++-----------
1 file changed, 17 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 3b5ba551cb14..18cda92432b8 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -123,6 +123,18 @@ static struct platform_device *devices[] __initdata = {
&pcm037_sram_device,
};
+static int uart0_pins[] = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1
+};
+
+static int uart2_pins[] = {
+ MX31_PIN_CSPI3_MOSI__RXD3,
+ MX31_PIN_CSPI3_MISO__TXD3
+};
+
/*
* Board specific initialization.
*/
@@ -130,24 +142,18 @@ static void __init mxc_board_init(void)
{
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
- mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
- mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
- mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
-
+ mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_iomux_mode(MX31_PIN_CSPI3_MOSI__RXD3);
- mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3);
-
+ mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2");
mxc_register_device(&mxc_uart_device2, &uart_pdata);
- mxc_iomux_mode(MX31_PIN_BATT_LINE__OWIRE);
+ mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
mxc_register_device(&mxc_w1_master_device, NULL);
/* SMSC9215 IRQ pin */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO));
- if (!gpio_request(MX31_PIN_GPIO3_1, "pcm037-eth"))
+ if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
+ "pcm037-eth"))
gpio_direction_input(MX31_PIN_GPIO3_1);
mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
--
cgit v1.2.3