From 778b28b4348af9c72bb5ac0dc129363a706325ef Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 29 Jun 2014 17:55:54 +0100 Subject: regulator: core: convert to use gpio_desc internally Convert the regulator GPIO handling to use a gpio descriptor rather than numbers. This allows us to revise the interfaces to permit all GPIOs to be used with the regulator core. Signed-off-by: Russell King Signed-off-by: Mark Brown --- drivers/regulator/core.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 4c1f999041dd..03ce33387a5d 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -77,7 +78,7 @@ struct regulator_map { */ struct regulator_enable_gpio { struct list_head list; - int gpio; + struct gpio_desc *gpiod; u32 enable_count; /* a number of enabled shared GPIO */ u32 request_count; /* a number of requested shared GPIO */ unsigned int ena_gpio_invert:1; @@ -1660,10 +1661,13 @@ static int regulator_ena_gpio_request(struct regulator_dev *rdev, const struct regulator_config *config) { struct regulator_enable_gpio *pin; + struct gpio_desc *gpiod; int ret; + gpiod = gpio_to_desc(config->ena_gpio); + list_for_each_entry(pin, ®ulator_ena_gpio_list, list) { - if (pin->gpio == config->ena_gpio) { + if (pin->gpiod == gpiod) { rdev_dbg(rdev, "GPIO %d is already used\n", config->ena_gpio); goto update_ena_gpio_to_rdev; @@ -1682,7 +1686,7 @@ static int regulator_ena_gpio_request(struct regulator_dev *rdev, return -ENOMEM; } - pin->gpio = config->ena_gpio; + pin->gpiod = gpiod; pin->ena_gpio_invert = config->ena_gpio_invert; list_add(&pin->list, ®ulator_ena_gpio_list); @@ -1701,10 +1705,10 @@ static void regulator_ena_gpio_free(struct regulator_dev *rdev) /* Free the GPIO only in case of no use */ list_for_each_entry_safe(pin, n, ®ulator_ena_gpio_list, list) { - if (pin->gpio == rdev->ena_pin->gpio) { + if (pin->gpiod == rdev->ena_pin->gpiod) { if (pin->request_count <= 1) { pin->request_count = 0; - gpio_free(pin->gpio); + gpiod_put(pin->gpiod); list_del(&pin->list); kfree(pin); } else { @@ -1732,8 +1736,8 @@ static int regulator_ena_gpio_ctrl(struct regulator_dev *rdev, bool enable) if (enable) { /* Enable GPIO at initial use */ if (pin->enable_count == 0) - gpio_set_value_cansleep(pin->gpio, - !pin->ena_gpio_invert); + gpiod_set_value_cansleep(pin->gpiod, + !pin->ena_gpio_invert); pin->enable_count++; } else { @@ -1744,8 +1748,8 @@ static int regulator_ena_gpio_ctrl(struct regulator_dev *rdev, bool enable) /* Disable GPIO if not used */ if (pin->enable_count <= 1) { - gpio_set_value_cansleep(pin->gpio, - pin->ena_gpio_invert); + gpiod_set_value_cansleep(pin->gpiod, + pin->ena_gpio_invert); pin->enable_count = 0; } } -- cgit v1.2.3 From 1028a37daa148cc6cf85aa2aecb4390ddf1e1e56 Mon Sep 17 00:00:00 2001 From: James Ban Date: Mon, 14 Jul 2014 13:48:45 +0900 Subject: regulator: da9211: new regulator driver This is the driver for the Dialog DA9211 Multi-phase 12A DC-DC Buck Converter regulator. It communicates via an I2C bus to the device. Signed-off-by: James Ban Signed-off-by: Mark Brown --- drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/da9211-regulator.c | 388 +++++++++++++++++++++++++++++++++++ drivers/regulator/da9211-regulator.h | 271 ++++++++++++++++++++++++ include/linux/regulator/da9211.h | 32 +++ 5 files changed, 702 insertions(+) create mode 100644 drivers/regulator/da9211-regulator.c create mode 100644 drivers/regulator/da9211-regulator.h create mode 100644 include/linux/regulator/da9211.h diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 789eb46090e3..f5040fc49a3a 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -198,6 +198,16 @@ config REGULATOR_DA9210 converter 12A DC-DC Buck controlled through an I2C interface. +config REGULATOR_DA9211 + tristate "Dialog Semiconductor DA9211/DA9212 regulator" + depends on I2C + select REGMAP_I2C + help + Say y here to support for the Dialog Semiconductor DA9211/DA9212. + The DA9211/DA9212 is a multi-phase synchronous step down + converter 12A DC-DC Buck controlled through an I2C + interface. + config REGULATOR_DBX500_PRCMU bool diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index d461110f4463..aa4a6aa7b558 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o obj-$(CONFIG_REGULATOR_DA9055) += da9055-regulator.o obj-$(CONFIG_REGULATOR_DA9063) += da9063-regulator.o obj-$(CONFIG_REGULATOR_DA9210) += da9210-regulator.o +obj-$(CONFIG_REGULATOR_DA9211) += da9211-regulator.o obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c new file mode 100644 index 000000000000..bd1850658a3f --- /dev/null +++ b/drivers/regulator/da9211-regulator.c @@ -0,0 +1,388 @@ +/* + * da9211-regulator.c - Regulator device driver for DA9211 + * Copyright (C) 2014 Dialog Semiconductor Ltd. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Library General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Library General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "da9211-regulator.h" + +#define DA9211_BUCK_MODE_SLEEP 1 +#define DA9211_BUCK_MODE_SYNC 2 +#define DA9211_BUCK_MODE_AUTO 3 + +/* DA9211 REGULATOR IDs */ +#define DA9211_ID_BUCKA 0 +#define DA9211_ID_BUCKB 1 + +struct da9211 { + struct device *dev; + struct regmap *regmap; + struct da9211_pdata *pdata; + struct regulator_dev *rdev[DA9211_MAX_REGULATORS]; + int num_regulator; + int chip_irq; +}; + +static const struct regmap_range_cfg da9211_regmap_range[] = { + { + .selector_reg = DA9211_REG_PAGE_CON, + .selector_mask = DA9211_REG_PAGE_MASK, + .selector_shift = DA9211_REG_PAGE_SHIFT, + .window_start = 0, + .window_len = 256, + .range_min = 0, + .range_max = 2*256, + }, +}; + +static const struct regmap_config da9211_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 2 * 256, + .ranges = da9211_regmap_range, + .num_ranges = ARRAY_SIZE(da9211_regmap_range), +}; + +/* Default limits measured in millivolts and milliamps */ +#define DA9211_MIN_MV 300 +#define DA9211_MAX_MV 1570 +#define DA9211_STEP_MV 10 + +/* Current limits for buck (uA) indices corresponds with register values */ +static const int da9211_current_limits[] = { + 2000000, 2200000, 2400000, 2600000, 2800000, 3000000, 3200000, 3400000, + 3600000, 3800000, 4000000, 4200000, 4400000, 4600000, 4800000, 5000000 +}; + +static unsigned int da9211_buck_get_mode(struct regulator_dev *rdev) +{ + int id = rdev_get_id(rdev); + struct da9211 *chip = rdev_get_drvdata(rdev); + unsigned int data; + int ret, mode = 0; + + ret = regmap_read(chip->regmap, DA9211_REG_BUCKA_CONF+id, &data); + if (ret < 0) + return ret; + + switch (data & 0x03) { + case DA9211_BUCK_MODE_SYNC: + mode = REGULATOR_MODE_FAST; + break; + case DA9211_BUCK_MODE_AUTO: + mode = REGULATOR_MODE_NORMAL; + break; + case DA9211_BUCK_MODE_SLEEP: + mode = REGULATOR_MODE_STANDBY; + break; + } + + return mode; +} + +static int da9211_buck_set_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + int id = rdev_get_id(rdev); + struct da9211 *chip = rdev_get_drvdata(rdev); + int val = 0; + + switch (mode) { + case REGULATOR_MODE_FAST: + val = DA9211_BUCK_MODE_SYNC; + break; + case REGULATOR_MODE_NORMAL: + val = DA9211_BUCK_MODE_AUTO; + break; + case REGULATOR_MODE_STANDBY: + val = DA9211_BUCK_MODE_SLEEP; + break; + } + + return regmap_update_bits(chip->regmap, DA9211_REG_BUCKA_CONF+id, + 0x03, val); +} + +static int da9211_set_current_limit(struct regulator_dev *rdev, int min, + int max) +{ + int id = rdev_get_id(rdev); + struct da9211 *chip = rdev_get_drvdata(rdev); + int i; + + /* search for closest to maximum */ + for (i = ARRAY_SIZE(da9211_current_limits)-1; i >= 0; i--) { + if (min <= da9211_current_limits[i] && + max >= da9211_current_limits[i]) { + return regmap_update_bits(chip->regmap, + DA9211_REG_BUCK_ILIM, + (0x0F << id*4), (i << id*4)); + } + } + + return -EINVAL; +} + +static int da9211_get_current_limit(struct regulator_dev *rdev) +{ + int id = rdev_get_id(rdev); + struct da9211 *chip = rdev_get_drvdata(rdev); + unsigned int data; + int ret; + + ret = regmap_read(chip->regmap, DA9211_REG_BUCK_ILIM, &data); + if (ret < 0) + return ret; + + /* select one of 16 values: 0000 (2000mA) to 1111 (5000mA) */ + data = (data >> id*4) & 0x0F; + return da9211_current_limits[data]; +} + +static struct regulator_ops da9211_buck_ops = { + .get_mode = da9211_buck_get_mode, + .set_mode = da9211_buck_set_mode, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_current_limit = da9211_set_current_limit, + .get_current_limit = da9211_get_current_limit, +}; + +#define DA9211_BUCK(_id) \ +{\ + .name = #_id,\ + .ops = &da9211_buck_ops,\ + .type = REGULATOR_VOLTAGE,\ + .id = DA9211_ID_##_id,\ + .n_voltages = (DA9211_MAX_MV - DA9211_MIN_MV) / DA9211_STEP_MV + 1,\ + .min_uV = (DA9211_MIN_MV * 1000),\ + .uV_step = (DA9211_STEP_MV * 1000),\ + .enable_reg = DA9211_REG_BUCKA_CONT + DA9211_ID_##_id,\ + .enable_mask = DA9211_BUCKA_EN,\ + .vsel_reg = DA9211_REG_VBUCKA_A + DA9211_ID_##_id * 2,\ + .vsel_mask = DA9211_VBUCK_MASK,\ + .owner = THIS_MODULE,\ +} + +static struct regulator_desc da9211_regulators[] = { + DA9211_BUCK(BUCKA), + DA9211_BUCK(BUCKB), +}; + +static irqreturn_t da9211_irq_handler(int irq, void *data) +{ + struct da9211 *chip = data; + int reg_val, err, ret = IRQ_NONE; + + err = regmap_read(chip->regmap, DA9211_REG_EVENT_B, ®_val); + if (err < 0) + goto error_i2c; + + if (reg_val & DA9211_E_OV_CURR_A) { + regulator_notifier_call_chain(chip->rdev[0], + REGULATOR_EVENT_OVER_CURRENT, + rdev_get_drvdata(chip->rdev[0])); + + err = regmap_write(chip->regmap, DA9211_REG_EVENT_B, + DA9211_E_OV_CURR_A); + if (err < 0) + goto error_i2c; + + ret = IRQ_HANDLED; + } + + if (reg_val & DA9211_E_OV_CURR_B) { + regulator_notifier_call_chain(chip->rdev[1], + REGULATOR_EVENT_OVER_CURRENT, + rdev_get_drvdata(chip->rdev[1])); + + err = regmap_write(chip->regmap, DA9211_REG_EVENT_B, + DA9211_E_OV_CURR_B); + if (err < 0) + goto error_i2c; + + ret = IRQ_HANDLED; + } + + return ret; + +error_i2c: + dev_err(chip->dev, "I2C error : %d\n", err); + return IRQ_NONE; +} + +static int da9211_regulator_init(struct da9211 *chip) +{ + struct regulator_config config = { }; + int i, ret; + unsigned int data; + + ret = regmap_read(chip->regmap, DA9211_REG_CONFIG_E, &data); + if (ret < 0) { + dev_err(chip->dev, "Failed to read CONTROL_E reg: %d\n", ret); + goto err; + } + + data &= DA9211_SLAVE_SEL; + /* If configuration for 1/2 bucks is different between platform data + * and the register, driver should exit. + */ + if ((chip->pdata->num_buck == 2 && data == 0x40) + || (chip->pdata->num_buck == 1 && data == 0x00)) { + if (data == 0) + chip->num_regulator = 1; + else + chip->num_regulator = 2; + } else { + ret = -EINVAL; + dev_err(chip->dev, "Configuration is mismatched\n"); + goto err; + } + + for (i = 0; i < chip->num_regulator; i++) { + if (chip->pdata) + config.init_data = + &(chip->pdata->init_data[i]); + + config.dev = chip->dev; + config.driver_data = chip; + config.regmap = chip->regmap; + + chip->rdev[i] = devm_regulator_register(chip->dev, + &da9211_regulators[i], &config); + if (IS_ERR(chip->rdev[i])) { + dev_err(chip->dev, + "Failed to register DA9211 regulator\n"); + ret = PTR_ERR(chip->rdev[i]); + goto err_regulator; + } + + if (chip->chip_irq != 0) { + ret = regmap_update_bits(chip->regmap, + DA9211_REG_MASK_B, DA9211_M_OV_CURR_A << i, 1); + if (ret < 0) { + dev_err(chip->dev, + "Failed to update mask reg: %d\n", ret); + goto err_regulator; + } + } + } + + return 0; + +err_regulator: + while (--i >= 0) + devm_regulator_unregister(chip->dev, chip->rdev[i]); +err: + return ret; +} +/* + * I2C driver interface functions + */ +static int da9211_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct da9211 *chip; + int error, ret; + + chip = devm_kzalloc(&i2c->dev, sizeof(struct da9211), GFP_KERNEL); + + chip->dev = &i2c->dev; + chip->regmap = devm_regmap_init_i2c(i2c, &da9211_regmap_config); + if (IS_ERR(chip->regmap)) { + error = PTR_ERR(chip->regmap); + dev_err(&i2c->dev, "Failed to allocate register map: %d\n", + error); + return error; + } + + i2c_set_clientdata(i2c, chip); + + chip->pdata = i2c->dev.platform_data; + if (!chip->pdata) { + dev_err(&i2c->dev, "No platform init data supplied\n"); + return -ENODEV; + } + + chip->chip_irq = i2c->irq; + + if (chip->chip_irq != 0) { + ret = devm_request_threaded_irq(chip->dev, chip->chip_irq, NULL, + da9211_irq_handler, + IRQF_TRIGGER_LOW|IRQF_ONESHOT, + "da9211", chip); + if (ret != 0) { + dev_err(chip->dev, "Failed to request IRQ: %d\n", + chip->chip_irq); + return ret; + } + } else { + dev_warn(chip->dev, "No IRQ configured\n"); + } + + ret = da9211_regulator_init(chip); + + if (ret < 0) + dev_err(&i2c->dev, "Failed to initialize regulator: %d\n", ret); + + return ret; +} + +static int da9211_i2c_remove(struct i2c_client *i2c) +{ + struct da9211 *chip = i2c_get_clientdata(i2c); + int i; + + for (i = 0; i < chip->num_regulator; i++) + devm_regulator_unregister(chip->dev, chip->rdev[i]); + + return 0; +} + +static const struct i2c_device_id da9211_i2c_id[] = { + {"da9211", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, da9211_i2c_id); + +static struct i2c_driver da9211_regulator_driver = { + .driver = { + .name = "da9211", + .owner = THIS_MODULE, + }, + .probe = da9211_i2c_probe, + .remove = da9211_i2c_remove, + .id_table = da9211_i2c_id, +}; + +module_i2c_driver(da9211_regulator_driver); + +MODULE_AUTHOR("James Ban "); +MODULE_DESCRIPTION("Regulator device driver for Dialog DA9211"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/da9211-regulator.h b/drivers/regulator/da9211-regulator.h new file mode 100644 index 000000000000..88b1769e8058 --- /dev/null +++ b/drivers/regulator/da9211-regulator.h @@ -0,0 +1,271 @@ +/* + * da9211-regulator.h - Regulator definitions for DA9211 + * Copyright (C) 2014 Dialog Semiconductor Ltd. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Library General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Library General Public License for more details. + */ + +#ifndef __DA9211_REGISTERS_H__ +#define __DA9211_REGISTERS_H__ + +/* Page selection */ +#define DA9211_REG_PAGE_CON 0x00 + +/* System Control and Event Registers */ +#define DA9211_REG_STATUS_A 0x50 +#define DA9211_REG_STATUS_B 0x51 +#define DA9211_REG_EVENT_A 0x52 +#define DA9211_REG_EVENT_B 0x53 +#define DA9211_REG_MASK_A 0x54 +#define DA9211_REG_MASK_B 0x55 +#define DA9211_REG_CONTROL_A 0x56 + +/* GPIO Control Registers */ +#define DA9211_REG_GPIO_0_1 0x58 +#define DA9211_REG_GPIO_2_3 0x59 +#define DA9211_REG_GPIO_4 0x5A + +/* Regulator Registers */ +#define DA9211_REG_BUCKA_CONT 0x5D +#define DA9211_REG_BUCKB_CONT 0x5E +#define DA9211_REG_BUCK_ILIM 0xD0 +#define DA9211_REG_BUCKA_CONF 0xD1 +#define DA9211_REG_BUCKB_CONF 0xD2 +#define DA9211_REG_BUCK_CONF 0xD3 +#define DA9211_REG_VBACKA_MAX 0xD5 +#define DA9211_REG_VBACKB_MAX 0xD6 +#define DA9211_REG_VBUCKA_A 0xD7 +#define DA9211_REG_VBUCKA_B 0xD8 +#define DA9211_REG_VBUCKB_A 0xD9 +#define DA9211_REG_VBUCKB_B 0xDA + +/* I2C Interface Settings */ +#define DA9211_REG_INTERFACE 0x105 + +/* BUCK Phase Selection*/ +#define DA9211_REG_CONFIG_E 0x147 + +/* + * Registers bits + */ +/* DA9211_REG_PAGE_CON (addr=0x00) */ +#define DA9211_REG_PAGE_SHIFT 1 +#define DA9211_REG_PAGE_MASK 0x02 +/* On I2C registers 0x00 - 0xFF */ +#define DA9211_REG_PAGE0 0 +/* On I2C registers 0x100 - 0x1FF */ +#define DA9211_REG_PAGE2 2 +#define DA9211_PAGE_WRITE_MODE 0x00 +#define DA9211_REPEAT_WRITE_MODE 0x40 +#define DA9211_PAGE_REVERT 0x80 + +/* DA9211_REG_STATUS_A (addr=0x50) */ +#define DA9211_GPI0 0x01 +#define DA9211_GPI1 0x02 +#define DA9211_GPI2 0x04 +#define DA9211_GPI3 0x08 +#define DA9211_GPI4 0x10 + +/* DA9211_REG_EVENT_A (addr=0x52) */ +#define DA9211_E_GPI0 0x01 +#define DA9211_E_GPI1 0x02 +#define DA9211_E_GPI2 0x04 +#define DA9211_E_GPI3 0x08 +#define DA9211_E_GPI4 0x10 +#define DA9211_E_UVLO_IO 0x40 + +/* DA9211_REG_EVENT_B (addr=0x53) */ +#define DA9211_E_PWRGOOD_A 0x01 +#define DA9211_E_PWRGOOD_B 0x02 +#define DA9211_E_TEMP_WARN 0x04 +#define DA9211_E_TEMP_CRIT 0x08 +#define DA9211_E_OV_CURR_A 0x10 +#define DA9211_E_OV_CURR_B 0x20 + +/* DA9211_REG_MASK_A (addr=0x54) */ +#define DA9211_M_GPI0 0x01 +#define DA9211_M_GPI1 0x02 +#define DA9211_M_GPI2 0x04 +#define DA9211_M_GPI3 0x08 +#define DA9211_M_GPI4 0x10 +#define DA9211_M_UVLO_IO 0x40 + +/* DA9211_REG_MASK_B (addr=0x55) */ +#define DA9211_M_PWRGOOD_A 0x01 +#define DA9211_M_PWRGOOD_B 0x02 +#define DA9211_M_TEMP_WARN 0x04 +#define DA9211_M_TEMP_CRIT 0x08 +#define DA9211_M_OV_CURR_A 0x10 +#define DA9211_M_OV_CURR_B 0x20 + +/* DA9211_REG_CONTROL_A (addr=0x56) */ +#define DA9211_DEBOUNCING_SHIFT 0 +#define DA9211_DEBOUNCING_MASK 0x07 +#define DA9211_SLEW_RATE_SHIFT 3 +#define DA9211_SLEW_RATE_A_MASK 0x18 +#define DA9211_SLEW_RATE_B_SHIFT 5 +#define DA9211_SLEW_RATE_B_MASK 0x60 +#define DA9211_V_LOCK 0x80 + +/* DA9211_REG_GPIO_0_1 (addr=0x58) */ +#define DA9211_GPIO0_PIN_SHIFT 0 +#define DA9211_GPIO0_PIN_MASK 0x03 +#define DA9211_GPIO0_PIN_GPI 0x00 +#define DA9211_GPIO0_PIN_GPO_OD 0x02 +#define DA9211_GPIO0_PIN_GPO 0x03 +#define DA9211_GPIO0_TYPE 0x04 +#define DA9211_GPIO0_TYPE_GPI 0x00 +#define DA9211_GPIO0_TYPE_GPO 0x04 +#define DA9211_GPIO0_MODE 0x08 +#define DA9211_GPIO1_PIN_SHIFT 4 +#define DA9211_GPIO1_PIN_MASK 0x30 +#define DA9211_GPIO1_PIN_GPI 0x00 +#define DA9211_GPIO1_PIN_VERROR 0x10 +#define DA9211_GPIO1_PIN_GPO_OD 0x20 +#define DA9211_GPIO1_PIN_GPO 0x30 +#define DA9211_GPIO1_TYPE_SHIFT 0x40 +#define DA9211_GPIO1_TYPE_GPI 0x00 +#define DA9211_GPIO1_TYPE_GPO 0x40 +#define DA9211_GPIO1_MODE 0x80 + +/* DA9211_REG_GPIO_2_3 (addr=0x59) */ +#define DA9211_GPIO2_PIN_SHIFT 0 +#define DA9211_GPIO2_PIN_MASK 0x03 +#define DA9211_GPIO2_PIN_GPI 0x00 +#define DA9211_GPIO5_PIN_BUCK_CLK 0x10 +#define DA9211_GPIO2_PIN_GPO_OD 0x02 +#define DA9211_GPIO2_PIN_GPO 0x03 +#define DA9211_GPIO2_TYPE 0x04 +#define DA9211_GPIO2_TYPE_GPI 0x00 +#define DA9211_GPIO2_TYPE_GPO 0x04 +#define DA9211_GPIO2_MODE 0x08 +#define DA9211_GPIO3_PIN_SHIFT 4 +#define DA9211_GPIO3_PIN_MASK 0x30 +#define DA9211_GPIO3_PIN_GPI 0x00 +#define DA9211_GPIO3_PIN_IERROR 0x10 +#define DA9211_GPIO3_PIN_GPO_OD 0x20 +#define DA9211_GPIO3_PIN_GPO 0x30 +#define DA9211_GPIO3_TYPE_SHIFT 0x40 +#define DA9211_GPIO3_TYPE_GPI 0x00 +#define DA9211_GPIO3_TYPE_GPO 0x40 +#define DA9211_GPIO3_MODE 0x80 + +/* DA9211_REG_GPIO_4 (addr=0x5A) */ +#define DA9211_GPIO4_PIN_SHIFT 0 +#define DA9211_GPIO4_PIN_MASK 0x03 +#define DA9211_GPIO4_PIN_GPI 0x00 +#define DA9211_GPIO4_PIN_GPO_OD 0x02 +#define DA9211_GPIO4_PIN_GPO 0x03 +#define DA9211_GPIO4_TYPE 0x04 +#define DA9211_GPIO4_TYPE_GPI 0x00 +#define DA9211_GPIO4_TYPE_GPO 0x04 +#define DA9211_GPIO4_MODE 0x08 + +/* DA9211_REG_BUCKA_CONT (addr=0x5D) */ +#define DA9211_BUCKA_EN 0x01 +#define DA9211_BUCKA_GPI_SHIFT 1 +#define DA9211_BUCKA_GPI_MASK 0x06 +#define DA9211_BUCKA_GPI_OFF 0x00 +#define DA9211_BUCKA_GPI_GPIO0 0x02 +#define DA9211_BUCKA_GPI_GPIO1 0x04 +#define DA9211_BUCKA_GPI_GPIO3 0x06 +#define DA9211_BUCKA_PD_DIS 0x08 +#define DA9211_VBUCKA_SEL 0x10 +#define DA9211_VBUCKA_SEL_A 0x00 +#define DA9211_VBUCKA_SEL_B 0x10 +#define DA9211_VBUCKA_GPI_SHIFT 5 +#define DA9211_VBUCKA_GPI_MASK 0x60 +#define DA9211_VBUCKA_GPI_OFF 0x00 +#define DA9211_VBUCKA_GPI_GPIO1 0x20 +#define DA9211_VBUCKA_GPI_GPIO2 0x40 +#define DA9211_VBUCKA_GPI_GPIO4 0x60 + +/* DA9211_REG_BUCKB_CONT (addr=0x5E) */ +#define DA9211_BUCKB_EN 0x01 +#define DA9211_BUCKB_GPI_SHIFT 1 +#define DA9211_BUCKB_GPI_MASK 0x06 +#define DA9211_BUCKB_GPI_OFF 0x00 +#define DA9211_BUCKB_GPI_GPIO0 0x02 +#define DA9211_BUCKB_GPI_GPIO1 0x04 +#define DA9211_BUCKB_GPI_GPIO3 0x06 +#define DA9211_BUCKB_PD_DIS 0x08 +#define DA9211_VBUCKB_SEL 0x10 +#define DA9211_VBUCKB_SEL_A 0x00 +#define DA9211_VBUCKB_SEL_B 0x10 +#define DA9211_VBUCKB_GPI_SHIFT 5 +#define DA9211_VBUCKB_GPI_MASK 0x60 +#define DA9211_VBUCKB_GPI_OFF 0x00 +#define DA9211_VBUCKB_GPI_GPIO1 0x20 +#define DA9211_VBUCKB_GPI_GPIO2 0x40 +#define DA9211_VBUCKB_GPI_GPIO4 0x60 + +/* DA9211_REG_BUCK_ILIM (addr=0xD0) */ +#define DA9211_BUCKA_ILIM_SHIFT 0 +#define DA9211_BUCKA_ILIM_MASK 0x0F +#define DA9211_BUCKB_ILIM_SHIFT 4 +#define DA9211_BUCKB_ILIM_MASK 0xF0 + +/* DA9211_REG_BUCKA_CONF (addr=0xD1) */ +#define DA9211_BUCKA_MODE_SHIFT 0 +#define DA9211_BUCKA_MODE_MASK 0x03 +#define DA9211_BUCKA_MODE_MANUAL 0x00 +#define DA9211_BUCKA_MODE_SLEEP 0x01 +#define DA9211_BUCKA_MODE_SYNC 0x02 +#define DA9211_BUCKA_MODE_AUTO 0x03 +#define DA9211_BUCKA_UP_CTRL_SHIFT 2 +#define DA9211_BUCKA_UP_CTRL_MASK 0x1C +#define DA9211_BUCKA_DOWN_CTRL_SHIFT 5 +#define DA9211_BUCKA_DOWN_CTRL_MASK 0xE0 + +/* DA9211_REG_BUCKB_CONF (addr=0xD2) */ +#define DA9211_BUCKB_MODE_SHIFT 0 +#define DA9211_BUCKB_MODE_MASK 0x03 +#define DA9211_BUCKB_MODE_MANUAL 0x00 +#define DA9211_BUCKB_MODE_SLEEP 0x01 +#define DA9211_BUCKB_MODE_SYNC 0x02 +#define DA9211_BUCKB_MODE_AUTO 0x03 +#define DA9211_BUCKB_UP_CTRL_SHIFT 2 +#define DA9211_BUCKB_UP_CTRL_MASK 0x1C +#define DA9211_BUCKB_DOWN_CTRL_SHIFT 5 +#define DA9211_BUCKB_DOWN_CTRL_MASK 0xE0 + +/* DA9211_REG_BUCK_CONF (addr=0xD3) */ +#define DA9211_PHASE_SEL_A_SHIFT 0 +#define DA9211_PHASE_SEL_A_MASK 0x03 +#define DA9211_PHASE_SEL_B_SHIFT 2 +#define DA9211_PHASE_SEL_B_MASK 0x04 +#define DA9211_PH_SH_EN_A_SHIFT 3 +#define DA9211_PH_SH_EN_A_MASK 0x08 +#define DA9211_PH_SH_EN_B_SHIFT 4 +#define DA9211_PH_SH_EN_B_MASK 0x10 + +/* DA9211_REG_VBUCKA_MAX (addr=0xD5) */ +#define DA9211_VBUCKA_BASE_SHIFT 0 +#define DA9211_VBUCKA_BASE_MASK 0x7F + +/* DA9211_REG_VBUCKB_MAX (addr=0xD6) */ +#define DA9211_VBUCKB_BASE_SHIFT 0 +#define DA9211_VBUCKB_BASE_MASK 0x7F + +/* DA9211_REG_VBUCKA/B_A/B (addr=0xD7/0xD8/0xD9/0xDA) */ +#define DA9211_VBUCK_SHIFT 0 +#define DA9211_VBUCK_MASK 0x7F +#define DA9211_VBUCK_BIAS 0 +#define DA9211_BUCK_SL 0x80 + +/* DA9211_REG_INTERFACE (addr=0x105) */ +#define DA9211_IF_BASE_ADDR_SHIFT 4 +#define DA9211_IF_BASE_ADDR_MASK 0xF0 + +/* DA9211_REG_CONFIG_E (addr=0x147) */ +#define DA9211_SLAVE_SEL 0x40 + +#endif /* __DA9211_REGISTERS_H__ */ diff --git a/include/linux/regulator/da9211.h b/include/linux/regulator/da9211.h new file mode 100644 index 000000000000..0981ce0e72cc --- /dev/null +++ b/include/linux/regulator/da9211.h @@ -0,0 +1,32 @@ +/* + * da9211.h - Regulator device driver for DA9211 + * Copyright (C) 2014 Dialog Semiconductor Ltd. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Library General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Library General Public License for more details. + */ + +#ifndef __LINUX_REGULATOR_DA9211_H +#define __LINUX_REGULATOR_DA9211_H + +#include + +#define DA9211_MAX_REGULATORS 2 + +struct da9211_pdata { + /* + * Number of buck + * 1 : 4 phase 1 buck + * 2 : 2 phase 2 buck + */ + int num_buck; + struct regulator_init_data *init_data; +}; +#endif -- cgit v1.2.3 From 516c1514b089e1c60a392b281f6c90f4b8e49183 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 20 Jul 2014 19:19:35 +0800 Subject: regulator: da9211: Remove unnecessary devm_regulator_unregister() calls Current code uses devm_regulator_register(), so the resource management code will ensure that the resource is freed. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/da9211-regulator.c | 28 ++++------------------------ 1 file changed, 4 insertions(+), 24 deletions(-) diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c index bd1850658a3f..1482adafa1ad 100644 --- a/drivers/regulator/da9211-regulator.c +++ b/drivers/regulator/da9211-regulator.c @@ -245,7 +245,7 @@ static int da9211_regulator_init(struct da9211 *chip) ret = regmap_read(chip->regmap, DA9211_REG_CONFIG_E, &data); if (ret < 0) { dev_err(chip->dev, "Failed to read CONTROL_E reg: %d\n", ret); - goto err; + return ret; } data &= DA9211_SLAVE_SEL; @@ -259,9 +259,8 @@ static int da9211_regulator_init(struct da9211 *chip) else chip->num_regulator = 2; } else { - ret = -EINVAL; dev_err(chip->dev, "Configuration is mismatched\n"); - goto err; + return -EINVAL; } for (i = 0; i < chip->num_regulator; i++) { @@ -278,8 +277,7 @@ static int da9211_regulator_init(struct da9211 *chip) if (IS_ERR(chip->rdev[i])) { dev_err(chip->dev, "Failed to register DA9211 regulator\n"); - ret = PTR_ERR(chip->rdev[i]); - goto err_regulator; + return PTR_ERR(chip->rdev[i]); } if (chip->chip_irq != 0) { @@ -288,18 +286,12 @@ static int da9211_regulator_init(struct da9211 *chip) if (ret < 0) { dev_err(chip->dev, "Failed to update mask reg: %d\n", ret); - goto err_regulator; + return ret; } } } return 0; - -err_regulator: - while (--i >= 0) - devm_regulator_unregister(chip->dev, chip->rdev[i]); -err: - return ret; } /* * I2C driver interface functions @@ -353,17 +345,6 @@ static int da9211_i2c_probe(struct i2c_client *i2c, return ret; } -static int da9211_i2c_remove(struct i2c_client *i2c) -{ - struct da9211 *chip = i2c_get_clientdata(i2c); - int i; - - for (i = 0; i < chip->num_regulator; i++) - devm_regulator_unregister(chip->dev, chip->rdev[i]); - - return 0; -} - static const struct i2c_device_id da9211_i2c_id[] = { {"da9211", 0}, {}, @@ -377,7 +358,6 @@ static struct i2c_driver da9211_regulator_driver = { .owner = THIS_MODULE, }, .probe = da9211_i2c_probe, - .remove = da9211_i2c_remove, .id_table = da9211_i2c_id, }; -- cgit v1.2.3 From 04eca28cde52cdf9eb91e127cc358ad79a8ec53b Mon Sep 17 00:00:00 2001 From: Tuomas Tynkkynen Date: Mon, 21 Jul 2014 18:38:48 +0300 Subject: regulator: Add helpers for low-level register access Add helper functions that allow regulator consumers to obtain low-level details about the regulator hardware, like the voltage selector register address and such. These details can be useful when configuring hardware or firmware that want to do low-level access to regulators, with no involvement from the kernel. The use-case for Tegra is a voltage-controlled oscillator clocksource which has control logic to change the supply voltage via I2C to achieve a desired output clock rate. Signed-off-by: Tuomas Tynkkynen Signed-off-by: Mark Brown --- Documentation/power/regulator/consumer.txt | 35 +++++++++++++++ drivers/regulator/core.c | 71 ++++++++++++++++++++++++++++++ include/linux/regulator/consumer.h | 26 +++++++++++ 3 files changed, 132 insertions(+) diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt index 55c4175d8099..81c0e2b49cd8 100644 --- a/Documentation/power/regulator/consumer.txt +++ b/Documentation/power/regulator/consumer.txt @@ -180,3 +180,38 @@ int regulator_unregister_notifier(struct regulator *regulator, Regulators use the kernel notifier framework to send event to their interested consumers. + +7. Regulator Direct Register Access +=================================== +Some kinds of power management hardware or firmware are designed such that +they need to do low-level hardware access to regulators, with no involvement +from the kernel. Examples of such devices are: + +- clocksource with a voltage-controlled oscillator and control logic to change + the supply voltage over I2C to achieve a desired output clock rate +- thermal management firmware that can issue an arbitrary I2C transaction to + perform system poweroff during overtemperature conditions + +To set up such a device/firmware, various parameters like I2C address of the +regulator, addresses of various regulator registers etc. need to be configured +to it. The regulator framework provides the following helpers for querying +these details. + +Bus-specific details, like I2C addresses or transfer rates are handled by the +regmap framework. To get the regulator's regmap (if supported), use :- + +struct regmap *regulator_get_regmap(struct regulator *regulator); + +To obtain the hardware register offset and bitmask for the regulator's voltage +selector register, use :- + +int regulator_get_hardware_vsel_register(struct regulator *regulator, + unsigned *vsel_reg, + unsigned *vsel_mask); + +To convert a regulator framework voltage selector code (used by +regulator_list_voltage) to a hardware-specific voltage selector that can be +directly written to the voltage selector register, use :- + +int regulator_list_hardware_vsel(struct regulator *regulator, + unsigned selector); diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 4c1f999041dd..486b5908469e 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2221,6 +2221,77 @@ int regulator_list_voltage(struct regulator *regulator, unsigned selector) } EXPORT_SYMBOL_GPL(regulator_list_voltage); +/** + * regulator_get_regmap - get the regulator's register map + * @regulator: regulator source + * + * Returns the register map for the given regulator, or an ERR_PTR value + * if the regulator doesn't use regmap. + */ +struct regmap *regulator_get_regmap(struct regulator *regulator) +{ + struct regmap *map = regulator->rdev->regmap; + + return map ? map : ERR_PTR(-EOPNOTSUPP); +} + +/** + * regulator_get_hardware_vsel_register - get the HW voltage selector register + * @regulator: regulator source + * @vsel_reg: voltage selector register, output parameter + * @vsel_mask: mask for voltage selector bitfield, output parameter + * + * Returns the hardware register offset and bitmask used for setting the + * regulator voltage. This might be useful when configuring voltage-scaling + * hardware or firmware that can make I2C requests behind the kernel's back, + * for example. + * + * On success, the output parameters @vsel_reg and @vsel_mask are filled in + * and 0 is returned, otherwise a negative errno is returned. + */ +int regulator_get_hardware_vsel_register(struct regulator *regulator, + unsigned *vsel_reg, + unsigned *vsel_mask) +{ + struct regulator_dev *rdev = regulator->rdev; + struct regulator_ops *ops = rdev->desc->ops; + + if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap) + return -EOPNOTSUPP; + + *vsel_reg = rdev->desc->vsel_reg; + *vsel_mask = rdev->desc->vsel_mask; + + return 0; +} +EXPORT_SYMBOL_GPL(regulator_get_hardware_vsel_register); + +/** + * regulator_list_hardware_vsel - get the HW-specific register value for a selector + * @regulator: regulator source + * @selector: identify voltage to list + * + * Converts the selector to a hardware-specific voltage selector that can be + * directly written to the regulator registers. The address of the voltage + * register can be determined by calling @regulator_get_hardware_vsel_register. + * + * On error a negative errno is returned. + */ +int regulator_list_hardware_vsel(struct regulator *regulator, + unsigned selector) +{ + struct regulator_dev *rdev = regulator->rdev; + struct regulator_ops *ops = rdev->desc->ops; + + if (selector >= rdev->desc->n_voltages) + return -EINVAL; + if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap) + return -EOPNOTSUPP; + + return selector; +} +EXPORT_SYMBOL_GPL(regulator_list_hardware_vsel); + /** * regulator_get_linear_step - return the voltage step size between VSEL values * @regulator: regulator source diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index a2d9d81038d1..0b1c8d09a6b1 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -37,6 +37,7 @@ struct device; struct notifier_block; +struct regmap; /* * Regulator operating modes. @@ -215,6 +216,13 @@ int regulator_set_optimum_mode(struct regulator *regulator, int load_uA); int regulator_allow_bypass(struct regulator *regulator, bool allow); +struct regmap *regulator_get_regmap(struct regulator *regulator); +int regulator_get_hardware_vsel_register(struct regulator *regulator, + unsigned *vsel_reg, + unsigned *vsel_mask); +int regulator_list_hardware_vsel(struct regulator *regulator, + unsigned selector); + /* regulator notifier block */ int regulator_register_notifier(struct regulator *regulator, struct notifier_block *nb); @@ -452,6 +460,24 @@ static inline int regulator_allow_bypass(struct regulator *regulator, return 0; } +struct regmap *regulator_get_regmap(struct regulator *regulator) +{ + return ERR_PTR(-EOPNOTSUPP); +} + +int regulator_get_hardware_vsel_register(struct regulator *regulator, + unsigned *vsel_reg, + unsigned *vsel_mask) +{ + return -EOPNOTSUPP; +} + +int regulator_list_hardware_vsel(struct regulator *regulator, + unsigned selector) +{ + return -EOPNOTSUPP; +} + static inline int regulator_register_notifier(struct regulator *regulator, struct notifier_block *nb) { -- cgit v1.2.3 From 404d4df260bc7b224ba51c704d24b7e452d8b68c Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 28 Jul 2014 12:32:04 +0100 Subject: regulator: lp872x: Don't set constraints within the regulator driver Regulator drivers should not be specifying constraints since the valid configurations depend on how the device is used in a given system, there is no way to know if a configuration is safe for a given board. Signed-off-by: Mark Brown --- drivers/regulator/lp872x.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c index 2e022aabd951..021d64d856bb 100644 --- a/drivers/regulator/lp872x.c +++ b/drivers/regulator/lp872x.c @@ -845,7 +845,6 @@ static struct lp872x_platform_data struct device_node *np = dev->of_node; struct lp872x_platform_data *pdata; struct of_regulator_match *match; - struct regulator_init_data *d; int num_matches; int count; int i; @@ -892,14 +891,6 @@ static struct lp872x_platform_data pdata->regulator_data[i].id = (enum lp872x_regulator_id)match[i].driver_data; pdata->regulator_data[i].init_data = match[i].init_data; - - /* Operation mode configuration for buck/buck1/buck2 */ - if (strncmp(match[i].name, "buck", 4)) - continue; - - d = pdata->regulator_data[i].init_data; - d->constraints.valid_modes_mask |= LP872X_VALID_OPMODE; - d->constraints.valid_ops_mask |= REGULATOR_CHANGE_MODE; } out: return pdata; -- cgit v1.2.3 From 3bc0312e67f0be679039980291f88405f20b0a95 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 25 Jul 2014 19:07:11 +0100 Subject: regulator: Add missing statics and inlines for stub functions So we don't get multiple definitions. Signed-off-by: Mark Brown --- include/linux/regulator/consumer.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 0b1c8d09a6b1..d9e6c20ab9bb 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -460,20 +460,20 @@ static inline int regulator_allow_bypass(struct regulator *regulator, return 0; } -struct regmap *regulator_get_regmap(struct regulator *regulator) +static inline struct regmap *regulator_get_regmap(struct regulator *regulator) { return ERR_PTR(-EOPNOTSUPP); } -int regulator_get_hardware_vsel_register(struct regulator *regulator, - unsigned *vsel_reg, - unsigned *vsel_mask) +static inline int regulator_get_hardware_vsel_register(struct regulator *regulator, + unsigned *vsel_reg, + unsigned *vsel_mask) { return -EOPNOTSUPP; } -int regulator_list_hardware_vsel(struct regulator *regulator, - unsigned selector) +static inline int regulator_list_hardware_vsel(struct regulator *regulator, + unsigned selector) { return -EOPNOTSUPP; } -- cgit v1.2.3