From 8053f21675b073b379cbca258ee4a3f3850dfa94 Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Tue, 26 Jul 2016 14:55:51 -0700 Subject: ASoC: dapm: Add a dummy snd_pcm_runtime to avoid NULL pointer access The SND_SOC_DAPM_PRE_PMU case would call startup()/hw_params() that might access substream->runtime through other functions. For example: Unable to handle kernel NULL pointer dereference at virtual address [....] PC is at snd_pcm_hw_rule_add+0x24/0x1b0 LR is at snd_pcm_hw_constraint_list+0x20/0x28 [....] Process arecord (pid: 424, stack limit = 0xffffffc1ecaf0020) Call trace: [] snd_pcm_hw_rule_add+0x24/0x1b0 [] snd_pcm_hw_constraint_list+0x20/0x28 [] cs53l30_pcm_startup+0x24/0x30 [] snd_soc_dai_link_event+0x290/0x354 [] dapm_seq_check_event.isra.31+0x134/0x2c8 [] dapm_seq_run_coalesced+0x94/0x1c8 [] dapm_seq_run+0xa4/0x404 [] dapm_power_widgets+0x524/0x984 [] snd_soc_dapm_stream_event+0x8c/0xa8 [] soc_pcm_prepare+0x10c/0x1ec [] snd_pcm_do_prepare+0x1c/0x38 [] snd_pcm_action_single+0x40/0x88 [] snd_pcm_action_nonatomic+0x70/0x90 [] snd_pcm_common_ioctl1+0xb6c/0xdd8 [] snd_pcm_capture_ioctl1+0x200/0x334 [] snd_pcm_ioctl_compat+0x648/0x95c [] compat_SyS_ioctl+0xac/0xfc4 [] el0_svc_naked+0x24/0x28 ---[ end trace 0dc4f99c2759c35c ]--- So this patch adds a dummy runtime for the original dummy substream to merely avoid the NULL pointer access. Signed-off-by: Nicolin Chen Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 8698c26773b3..d908ff8f9755 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -3493,6 +3493,7 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w, const struct snd_soc_pcm_stream *config = w->params + w->params_select; struct snd_pcm_substream substream; struct snd_pcm_hw_params *params = NULL; + struct snd_pcm_runtime *runtime = NULL; u64 fmt; int ret; @@ -3541,6 +3542,14 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w, memset(&substream, 0, sizeof(substream)); + /* Allocate a dummy snd_pcm_runtime for startup() and other ops() */ + runtime = kzalloc(sizeof(*runtime), GFP_KERNEL); + if (!runtime) { + ret = -ENOMEM; + goto out; + } + substream.runtime = runtime; + switch (event) { case SND_SOC_DAPM_PRE_PMU: substream.stream = SNDRV_PCM_STREAM_CAPTURE; @@ -3606,6 +3615,7 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w, } out: + kfree(runtime); kfree(params); return ret; } -- cgit v1.2.3 From 93ca33c99f22a0a096f83f19c9f887aeb67507a1 Mon Sep 17 00:00:00 2001 From: Hiroyuki Yokoyama Date: Mon, 25 Jul 2016 01:52:43 +0000 Subject: ASoC: rsnd: Fixup SRCm_IFSVR calculate method This patch fixes the calculation accuracy degradation of SRCm_IFSVR register value. Signed-off-by: Hiroyuki Yokoyama Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/rcar/src.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/soc/sh/rcar/src.c b/sound/soc/sh/rcar/src.c index e39f916d0f2f..969a5169de25 100644 --- a/sound/soc/sh/rcar/src.c +++ b/sound/soc/sh/rcar/src.c @@ -226,8 +226,12 @@ static void rsnd_src_set_convert_rate(struct rsnd_dai_stream *io, ifscr = 0; fsrate = 0; if (fin != fout) { + u64 n; + ifscr = 1; - fsrate = 0x0400000 / fout * fin; + n = (u64)0x0400000 * fin; + do_div(n, fout); + fsrate = n; } /* -- cgit v1.2.3 From 9b622e2bbcf049c82e2550d35fb54ac205965f50 Mon Sep 17 00:00:00 2001 From: Tomasz Majchrzak Date: Thu, 28 Jul 2016 10:28:25 +0200 Subject: raid10: increment write counter after bio is split md pending write counter must be incremented after bio is split, otherwise it gets decremented too many times in end bio callback and becomes negative. Signed-off-by: Tomasz Majchrzak Reviewed-by: Artur Paszkiewicz Signed-off-by: Shaohua Li --- drivers/md/raid10.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index ed29fc899f06..1a632a8c8005 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1064,6 +1064,8 @@ static void __make_request(struct mddev *mddev, struct bio *bio) int max_sectors; int sectors; + md_write_start(mddev, bio); + /* * Register the new request and wait if the reconstruction * thread has put up a bar for new requests. @@ -1445,8 +1447,6 @@ static void raid10_make_request(struct mddev *mddev, struct bio *bio) return; } - md_write_start(mddev, bio); - do { /* -- cgit v1.2.3 From 3980bd3b406addb327d858aebd19e229ea340b9a Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sun, 31 Jul 2016 23:38:36 -0400 Subject: ext4: reserve xattr index for the Hurd The Hurd is using inode fields which restricts it from using more advanced ext4 file system features, due to design choices made over a decade ago. By giving the Hurd an extended attribute index field we allow it to move the translator and author fields out of the core inode fields, and hopefully we can get rid of ugly hacks such as EXT4_OS_HURD and EXT4_MOUNT2_HURD_COMPAT somday. For more information please see: https://summerofcode.withgoogle.com/projects/#5869799859027968 Signed-off-by: Theodore Ts'o --- fs/ext4/xattr.h | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/xattr.h b/fs/ext4/xattr.h index 69dd3e6566e0..a92e783fa057 100644 --- a/fs/ext4/xattr.h +++ b/fs/ext4/xattr.h @@ -24,6 +24,7 @@ #define EXT4_XATTR_INDEX_SYSTEM 7 #define EXT4_XATTR_INDEX_RICHACL 8 #define EXT4_XATTR_INDEX_ENCRYPTION 9 +#define EXT4_XATTR_INDEX_HURD 10 /* Reserved for Hurd */ struct ext4_xattr_header { __le32 h_magic; /* magic number for identification */ -- cgit v1.2.3 From 829fa70dddadf9dd041d62b82cd7cea63943899d Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 1 Aug 2016 00:51:02 -0400 Subject: ext4: validate that metadata blocks do not overlap superblock A number of fuzzing failures seem to be caused by allocation bitmaps or other metadata blocks being pointed at the superblock. This can cause kernel BUG or WARNings once the superblock is overwritten, so validate the group descriptor blocks to make sure this doesn't happen. Cc: stable@vger.kernel.org Signed-off-by: Theodore Ts'o --- fs/ext4/super.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index c13a4e464738..da3146e8d49a 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2211,6 +2211,7 @@ void ext4_group_desc_csum_set(struct super_block *sb, __u32 block_group, /* Called at mount-time, super-block is locked */ static int ext4_check_descriptors(struct super_block *sb, + ext4_fsblk_t sb_block, ext4_group_t *first_not_zeroed) { struct ext4_sb_info *sbi = EXT4_SB(sb); @@ -2241,6 +2242,11 @@ static int ext4_check_descriptors(struct super_block *sb, grp = i; block_bitmap = ext4_block_bitmap(sb, gdp); + if (block_bitmap == sb_block) { + ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: " + "Block bitmap for group %u overlaps " + "superblock", i); + } if (block_bitmap < first_block || block_bitmap > last_block) { ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: " "Block bitmap for group %u not in group " @@ -2248,6 +2254,11 @@ static int ext4_check_descriptors(struct super_block *sb, return 0; } inode_bitmap = ext4_inode_bitmap(sb, gdp); + if (inode_bitmap == sb_block) { + ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: " + "Inode bitmap for group %u overlaps " + "superblock", i); + } if (inode_bitmap < first_block || inode_bitmap > last_block) { ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: " "Inode bitmap for group %u not in group " @@ -2255,6 +2266,11 @@ static int ext4_check_descriptors(struct super_block *sb, return 0; } inode_table = ext4_inode_table(sb, gdp); + if (inode_table == sb_block) { + ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: " + "Inode table for group %u overlaps " + "superblock", i); + } if (inode_table < first_block || inode_table + sbi->s_itb_per_group - 1 > last_block) { ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: " @@ -3757,7 +3773,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) goto failed_mount2; } } - if (!ext4_check_descriptors(sb, &first_not_zeroed)) { + if (!ext4_check_descriptors(sb, logical_sb_block, &first_not_zeroed)) { ext4_msg(sb, KERN_ERR, "group descriptors corrupted!"); ret = -EFSCORRUPTED; goto failed_mount2; -- cgit v1.2.3 From 2392f7fd695246df4fb5f0b5fb88ce37cdb01764 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 26 Jul 2016 18:06:39 +0530 Subject: ASoC: Intel: Skylake: Check list empty while getting module info Module list can be NULL so check if the list is empty before accessing the list. Signed-off-by: Senthilnathan Veppur Signed-off-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-sst-utils.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/intel/skylake/skl-sst-utils.c b/sound/soc/intel/skylake/skl-sst-utils.c index 25fcb796bd86..ddcb52a51854 100644 --- a/sound/soc/intel/skylake/skl-sst-utils.c +++ b/sound/soc/intel/skylake/skl-sst-utils.c @@ -123,6 +123,11 @@ int snd_skl_get_module_info(struct skl_sst *ctx, u8 *uuid, uuid_mod = (uuid_le *)uuid; + if (list_empty(&ctx->uuid_list)) { + dev_err(ctx->dev, "Module list is empty\n"); + return -EINVAL; + } + list_for_each_entry(module, &ctx->uuid_list, list) { if (uuid_le_cmp(*uuid_mod, module->uuid) == 0) { dfw_config->module_id = module->id; -- cgit v1.2.3 From ff00d3b4e5e4395c825e8ec628f25932d812f31a Mon Sep 17 00:00:00 2001 From: ZhengYuan Liu Date: Thu, 28 Jul 2016 14:22:14 +0800 Subject: raid5: fix incorrectly counter of conf->empty_inactive_list_nr The counter conf->empty_inactive_list_nr is only used for determine if the raid5 is congested which is deal with in function raid5_congested(). It was increased in get_free_stripe() when conf->inactive_list got to be empty and decreased in release_inactive_stripe_list() when splice temp_inactive_list to conf->inactive_list. However, this may have a problem when raid5_get_active_stripe or stripe_add_to_batch_list was called, because these two functions may call list_del_init(&sh->lru) to delete sh from "conf->inactive_list + hash" which may cause "conf->inactive_list + hash" to be empty when atomic_inc_not_zero(&sh->count) got false. So a check should be done at these two point and increase empty_inactive_list_nr accordingly. Otherwise the counter may get to be negative number which would influence async readahead from VFS. Signed-off-by: ZhengYuan Liu Signed-off-by: Shaohua Li --- drivers/md/raid5.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index d189e894b921..e379b89fd8b1 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -659,6 +659,7 @@ raid5_get_active_stripe(struct r5conf *conf, sector_t sector, { struct stripe_head *sh; int hash = stripe_hash_locks_hash(sector); + int inc_empty_inactive_list_flag; pr_debug("get_stripe, sector %llu\n", (unsigned long long)sector); @@ -703,7 +704,12 @@ raid5_get_active_stripe(struct r5conf *conf, sector_t sector, atomic_inc(&conf->active_stripes); BUG_ON(list_empty(&sh->lru) && !test_bit(STRIPE_EXPANDING, &sh->state)); + inc_empty_inactive_list_flag = 0; + if (!list_empty(conf->inactive_list + hash)) + inc_empty_inactive_list_flag = 1; list_del_init(&sh->lru); + if (list_empty(conf->inactive_list + hash) && inc_empty_inactive_list_flag) + atomic_inc(&conf->empty_inactive_list_nr); if (sh->group) { sh->group->stripes_cnt--; sh->group = NULL; @@ -762,6 +768,7 @@ static void stripe_add_to_batch_list(struct r5conf *conf, struct stripe_head *sh sector_t head_sector, tmp_sec; int hash; int dd_idx; + int inc_empty_inactive_list_flag; /* Don't cross chunks, so stripe pd_idx/qd_idx is the same */ tmp_sec = sh->sector; @@ -779,7 +786,12 @@ static void stripe_add_to_batch_list(struct r5conf *conf, struct stripe_head *sh atomic_inc(&conf->active_stripes); BUG_ON(list_empty(&head->lru) && !test_bit(STRIPE_EXPANDING, &head->state)); + inc_empty_inactive_list_flag = 0; + if (!list_empty(conf->inactive_list + hash)) + inc_empty_inactive_list_flag = 1; list_del_init(&head->lru); + if (list_empty(conf->inactive_list + hash) && inc_empty_inactive_list_flag) + atomic_inc(&conf->empty_inactive_list_nr); if (head->group) { head->group->stripes_cnt--; head->group = NULL; -- cgit v1.2.3 From 680682d4d537565e2c358483e1feeca30a8cf3d4 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sun, 17 Jul 2016 19:55:27 +0100 Subject: cfg80211: fix missing break in NL8211_CHAN_WIDTH_80P80 case The switch on chandef->width is missing a break on the NL8211_CHAN_WIDTH_80P80 case; currently we get a WARN_ON when center_freq2 is non-zero because of the missing break. Signed-off-by: Colin Ian King Signed-off-by: Johannes Berg --- net/wireless/chan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/wireless/chan.c b/net/wireless/chan.c index da49c0b1fd32..bb3d64ee68aa 100644 --- a/net/wireless/chan.c +++ b/net/wireless/chan.c @@ -513,6 +513,7 @@ static bool cfg80211_chandef_dfs_available(struct wiphy *wiphy, r = cfg80211_get_chans_dfs_available(wiphy, chandef->center_freq2, width); + break; default: WARN_ON(chandef->center_freq2); break; -- cgit v1.2.3 From 4e3f21bc7bfbdc4a348852e4da1540227e1b0171 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 11 Jul 2016 15:09:15 +0200 Subject: mac80211: fix check for buffered powersave frames with txq The logic was inverted here, set the bit if frames are pending. Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation") Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 2e8a9024625a..9dce3b157908 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1268,7 +1268,7 @@ static void sta_ps_start(struct sta_info *sta) for (tid = 0; tid < ARRAY_SIZE(sta->sta.txq); tid++) { struct txq_info *txqi = to_txq_info(sta->sta.txq[tid]); - if (!txqi->tin.backlog_packets) + if (txqi->tin.backlog_packets) set_bit(tid, &sta->txq_buffered_tids); else clear_bit(tid, &sta->txq_buffered_tids); -- cgit v1.2.3 From c37a54ac37e7fbf8abe2b7b886ac5f1b3e8f8d29 Mon Sep 17 00:00:00 2001 From: Maital Hahn Date: Wed, 13 Jul 2016 14:44:41 +0300 Subject: mac80211: mesh: flush stations before beacons are stopped Some drivers (e.g. wl18xx) expect that the last stage in the de-initialization process will be stopping the beacons, similar to AP flow. Update ieee80211_stop_mesh() flow accordingly. As peers can be removed dynamically, this would not impact other drivers. Tested also on Ralink RT3572 chipset. Signed-off-by: Maital Hahn Signed-off-by: Yaniv Machani Signed-off-by: Johannes Berg --- net/mac80211/mesh.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index c66411df9863..42120d965263 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -881,20 +881,22 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) netif_carrier_off(sdata->dev); + /* flush STAs and mpaths on this iface */ + sta_info_flush(sdata); + mesh_path_flush_by_iface(sdata); + /* stop the beacon */ ifmsh->mesh_id_len = 0; sdata->vif.bss_conf.enable_beacon = false; clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); + + /* remove beacon */ bcn = rcu_dereference_protected(ifmsh->beacon, lockdep_is_held(&sdata->wdev.mtx)); RCU_INIT_POINTER(ifmsh->beacon, NULL); kfree_rcu(bcn, rcu_head); - /* flush STAs and mpaths on this iface */ - sta_info_flush(sdata); - mesh_path_flush_by_iface(sdata); - /* free all potentially still buffered group-addressed frames */ local->total_ps_buffered -= skb_queue_len(&ifmsh->ps.bc_buf); skb_queue_purge(&ifmsh->ps.bc_buf); -- cgit v1.2.3 From 1f85e118c81d15aa9e002604dfb69c823d4aac16 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 3 Aug 2016 01:24:05 +0000 Subject: ASoC: simple-card-utils: add missing MODULE_xxx() simple-card-utils might be used as module, but MODULE_xxx() information was missed. This patch adds it. Otherwise, we will have below error, and can't use it. Specil thanks to Kevin. > insmod simple-card-utils.ko simple_card_utils: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint simple_card_utils: Unknown symbol snd_soc_of_parse_daifmt (err 0) simple_card_utils: Unknown symbol snd_soc_of_parse_card_name (err 0) insmod: can't insert 'simple-card-utils.ko': \ unknown symbol in module, or unknown parameter Reported-by: Kevin Hilman Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/generic/Makefile | 6 +++--- sound/soc/generic/simple-card-utils.c | 6 ++++++ 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/sound/soc/generic/Makefile b/sound/soc/generic/Makefile index 45602ca8536e..2d53c8d70705 100644 --- a/sound/soc/generic/Makefile +++ b/sound/soc/generic/Makefile @@ -1,5 +1,5 @@ -obj-$(CONFIG_SND_SIMPLE_CARD_UTILS) := simple-card-utils.o - +snd-soc-simple-card-utils-objs := simple-card-utils.o snd-soc-simple-card-objs := simple-card.o -obj-$(CONFIG_SND_SIMPLE_CARD) += snd-soc-simple-card.o +obj-$(CONFIG_SND_SIMPLE_CARD_UTILS) += snd-soc-simple-card-utils.o +obj-$(CONFIG_SND_SIMPLE_CARD) += snd-soc-simple-card.o diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c index d89a9a1b2471..9599de69a880 100644 --- a/sound/soc/generic/simple-card-utils.c +++ b/sound/soc/generic/simple-card-utils.c @@ -7,6 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include #include #include @@ -95,3 +96,8 @@ int asoc_simple_card_parse_card_name(struct snd_soc_card *card, return 0; } EXPORT_SYMBOL_GPL(asoc_simple_card_parse_card_name); + +/* Module information */ +MODULE_AUTHOR("Kuninori Morimoto "); +MODULE_DESCRIPTION("ALSA SoC Simple Card Utils"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From bce91f8a4247905b8c40a53f72c14db908cd0710 Mon Sep 17 00:00:00 2001 From: Jarno Rajahalme Date: Mon, 1 Aug 2016 19:36:07 -0700 Subject: openvswitch: Remove incorrect WARN_ONCE(). ovs_ct_find_existing() issues a warning if an existing conntrack entry classified as IP_CT_NEW is found, with the premise that this should not happen. However, a newly confirmed, non-expected conntrack entry remains IP_CT_NEW as long as no reply direction traffic is seen. This has resulted into somewhat confusing kernel log messages. This patch removes this check and warning. Fixes: 289f2253 ("openvswitch: Find existing conntrack entry after upcall.") Suggested-by: Joe Stringer Signed-off-by: Jarno Rajahalme Acked-by: Joe Stringer Signed-off-by: David S. Miller --- net/openvswitch/conntrack.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c index c644c78ed485..e054a748ff25 100644 --- a/net/openvswitch/conntrack.c +++ b/net/openvswitch/conntrack.c @@ -433,7 +433,6 @@ ovs_ct_find_existing(struct net *net, const struct nf_conntrack_zone *zone, struct nf_conntrack_l4proto *l4proto; struct nf_conntrack_tuple tuple; struct nf_conntrack_tuple_hash *h; - enum ip_conntrack_info ctinfo; struct nf_conn *ct; unsigned int dataoff; u8 protonum; @@ -458,13 +457,8 @@ ovs_ct_find_existing(struct net *net, const struct nf_conntrack_zone *zone, ct = nf_ct_tuplehash_to_ctrack(h); - ctinfo = ovs_ct_get_info(h); - if (ctinfo == IP_CT_NEW) { - /* This should not happen. */ - WARN_ONCE(1, "ovs_ct_find_existing: new packet for %p\n", ct); - } skb->nfct = &ct->ct_general; - skb->nfctinfo = ctinfo; + skb->nfctinfo = ovs_ct_get_info(h); return ct; } -- cgit v1.2.3 From ea966cb6b9e11e87f7b146549aef8e13cad5c6ff Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 2 Aug 2016 12:23:29 +0200 Subject: net: xgene: fix maybe-uninitialized variable Building with -Wmaybe-uninitialized shows a potential use of an uninitialized variable: drivers/net/ethernet/apm/xgene/xgene_enet_hw.c: In function 'xgene_enet_phy_connect': drivers/net/ethernet/apm/xgene/xgene_enet_hw.c:802:23: warning: 'phy_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] Although the compiler correctly identified this based on the function, the current code is still safe as long dev->of_node is non-NULL for the case of CONFIG_ACPI=n, which is currently the case. The warning is now disabled by default, but still appears when building with W=1, and other build test tools should be able to detect it as well. Adding an #else clause here makes the code more robust and makes it clear to the compiler that this cannot happen. Signed-off-by: Arnd Bergmann Fixes: 8089a96f601b ("drivers: net: xgene: Add backward compatibility") Signed-off-by: David S. Miller --- drivers/net/ethernet/apm/xgene/xgene_enet_hw.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c index 37a0f463b8de..18bb9556dd00 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c @@ -793,6 +793,8 @@ int xgene_enet_phy_connect(struct net_device *ndev) netdev_err(ndev, "Could not connect to PHY\n"); return -ENODEV; } +#else + return -ENODEV; #endif } -- cgit v1.2.3 From 1f415a74b0ca64b5bfacbb12d71ed2ec050a8cfb Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Tue, 2 Aug 2016 16:12:14 +0100 Subject: bpf: fix method of PTR_TO_PACKET reg id generation Using per-register incrementing ID can lead to find_good_pkt_pointers() confusing registers which have completely different values. Consider example: 0: (bf) r6 = r1 1: (61) r8 = *(u32 *)(r6 +76) 2: (61) r0 = *(u32 *)(r6 +80) 3: (bf) r7 = r8 4: (07) r8 += 32 5: (2d) if r8 > r0 goto pc+9 R0=pkt_end R1=ctx R6=ctx R7=pkt(id=0,off=0,r=32) R8=pkt(id=0,off=32,r=32) R10=fp 6: (bf) r8 = r7 7: (bf) r9 = r7 8: (71) r1 = *(u8 *)(r7 +0) 9: (0f) r8 += r1 10: (71) r1 = *(u8 *)(r7 +1) 11: (0f) r9 += r1 12: (07) r8 += 32 13: (2d) if r8 > r0 goto pc+1 R0=pkt_end R1=inv56 R6=ctx R7=pkt(id=0,off=0,r=32) R8=pkt(id=1,off=32,r=32) R9=pkt(id=1,off=0,r=32) R10=fp 14: (71) r1 = *(u8 *)(r9 +16) 15: (b7) r7 = 0 16: (bf) r0 = r7 17: (95) exit We need to get a UNKNOWN_VALUE with imm to force id generation so lines 0-5 make r7 a valid packet pointer. We then read two different bytes from the packet and add them to copies of the constructed packet pointer. r8 (line 9) and r9 (line 11) will get the same id of 1, independently. When either of them is validated (line 13) - find_good_pkt_pointers() will also mark the other as safe. This leads to access on line 14 being mistakenly considered safe. Fixes: 969bf05eb3ce ("bpf: direct packet access") Signed-off-by: Jakub Kicinski Acked-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller --- kernel/bpf/verifier.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index f72f23b8fdab..7094c69ac199 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -194,6 +194,7 @@ struct verifier_env { struct verifier_state_list **explored_states; /* search pruning optimization */ struct bpf_map *used_maps[MAX_USED_MAPS]; /* array of map's used by eBPF program */ u32 used_map_cnt; /* number of used maps */ + u32 id_gen; /* used to generate unique reg IDs */ bool allow_ptr_leaks; }; @@ -1301,7 +1302,7 @@ add_imm: /* dst_reg stays as pkt_ptr type and since some positive * integer value was added to the pointer, increment its 'id' */ - dst_reg->id++; + dst_reg->id = ++env->id_gen; /* something was added to pkt_ptr, set range and off to zero */ dst_reg->off = 0; -- cgit v1.2.3 From 087d7a8c917491e6e7feb707a858d624bf5b5f14 Mon Sep 17 00:00:00 2001 From: Satish Baddipadige Date: Wed, 3 Aug 2016 09:43:59 +0530 Subject: tg3: Fix for diasllow rx coalescing time to be 0 When the rx coalescing time is 0, interrupts are not generated from the controller and rx path hangs. To avoid this rx hang, updating the driver to not allow rx coalescing time to be 0. Signed-off-by: Satish Baddipadige Signed-off-by: Siva Reddy Kallam Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index ff300f7cf529..f3c6c915e423 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -14014,6 +14014,7 @@ static int tg3_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec) } if ((ec->rx_coalesce_usecs > MAX_RXCOL_TICKS) || + (!ec->rx_coalesce_usecs) || (ec->tx_coalesce_usecs > MAX_TXCOL_TICKS) || (ec->rx_max_coalesced_frames > MAX_RXMAX_FRAMES) || (ec->tx_max_coalesced_frames > MAX_TXMAX_FRAMES) || -- cgit v1.2.3 From 9ce6fd7a81e6f787756be2f4b85f4f7bb3658de3 Mon Sep 17 00:00:00 2001 From: Siva Reddy Kallam Date: Wed, 3 Aug 2016 09:44:00 +0530 Subject: tg3: Report the correct number of RSS queues through tg3_get_rxnfc This patch remove the wrong substraction from info->data in tg3_get_rxnfc function. Without this patch, the number of RSS queues reported is less by one. Reported-by: Michal Soltys Signed-off-by: Siva Reddy Kallam Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index f3c6c915e423..659261218d9f 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -12552,10 +12552,6 @@ static int tg3_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info, info->data = TG3_RSS_MAX_NUM_QS; } - /* The first interrupt vector only - * handles link interrupts. - */ - info->data -= 1; return 0; default: -- cgit v1.2.3 From 2b10d3ecf2dac737653828889ff85f614318f01a Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Wed, 3 Aug 2016 04:02:02 -0400 Subject: qlcnic: fix data structure corruption in async mbx command handling This patch fixes a data structure corruption bug in the SRIOV VF mailbox handler code. While handling mailbox commands from the atomic context, driver is accessing and updating qlcnic_async_work_list_struct entry fields in the async work list. These fields could be concurrently accessed by the work function resulting in data corruption. This patch restructures async mbx command handling by using a separate async command list instead of using a list of work_struct structures. A single work_struct is used to schedule and handle the async commands with proper locking mechanism. Signed-off-by: Rajesh Borundia Signed-off-by: Sony Chacko Signed-off-by: Manish Chopra Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h | 9 +- .../ethernet/qlogic/qlcnic/qlcnic_sriov_common.c | 95 +++++++++++++--------- 2 files changed, 60 insertions(+), 44 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h index 017d8c2c8285..24061b9b92e8 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h @@ -156,10 +156,8 @@ struct qlcnic_vf_info { spinlock_t vlan_list_lock; /* Lock for VLAN list */ }; -struct qlcnic_async_work_list { +struct qlcnic_async_cmd { struct list_head list; - struct work_struct work; - void *ptr; struct qlcnic_cmd_args *cmd; }; @@ -168,7 +166,10 @@ struct qlcnic_back_channel { struct workqueue_struct *bc_trans_wq; struct workqueue_struct *bc_async_wq; struct workqueue_struct *bc_flr_wq; - struct list_head async_list; + struct qlcnic_adapter *adapter; + struct list_head async_cmd_list; + struct work_struct vf_async_work; + spinlock_t queue_lock; /* async_cmd_list queue lock */ }; struct qlcnic_sriov { diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c index 7327b729ba2e..d7107055ec60 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c @@ -29,6 +29,7 @@ #define QLC_83XX_VF_RESET_FAIL_THRESH 8 #define QLC_BC_CMD_MAX_RETRY_CNT 5 +static void qlcnic_sriov_handle_async_issue_cmd(struct work_struct *work); static void qlcnic_sriov_vf_free_mac_list(struct qlcnic_adapter *); static int qlcnic_sriov_alloc_bc_mbx_args(struct qlcnic_cmd_args *, u32); static void qlcnic_sriov_vf_poll_dev_state(struct work_struct *); @@ -177,7 +178,10 @@ int qlcnic_sriov_init(struct qlcnic_adapter *adapter, int num_vfs) } bc->bc_async_wq = wq; - INIT_LIST_HEAD(&bc->async_list); + INIT_LIST_HEAD(&bc->async_cmd_list); + INIT_WORK(&bc->vf_async_work, qlcnic_sriov_handle_async_issue_cmd); + spin_lock_init(&bc->queue_lock); + bc->adapter = adapter; for (i = 0; i < num_vfs; i++) { vf = &sriov->vf_info[i]; @@ -1517,17 +1521,21 @@ static void qlcnic_vf_add_mc_list(struct net_device *netdev, const u8 *mac, void qlcnic_sriov_cleanup_async_list(struct qlcnic_back_channel *bc) { - struct list_head *head = &bc->async_list; - struct qlcnic_async_work_list *entry; + struct list_head *head = &bc->async_cmd_list; + struct qlcnic_async_cmd *entry; flush_workqueue(bc->bc_async_wq); + cancel_work_sync(&bc->vf_async_work); + + spin_lock(&bc->queue_lock); while (!list_empty(head)) { - entry = list_entry(head->next, struct qlcnic_async_work_list, + entry = list_entry(head->next, struct qlcnic_async_cmd, list); - cancel_work_sync(&entry->work); list_del(&entry->list); + kfree(entry->cmd); kfree(entry); } + spin_unlock(&bc->queue_lock); } void qlcnic_sriov_vf_set_multi(struct net_device *netdev) @@ -1587,57 +1595,64 @@ void qlcnic_sriov_vf_set_multi(struct net_device *netdev) static void qlcnic_sriov_handle_async_issue_cmd(struct work_struct *work) { - struct qlcnic_async_work_list *entry; - struct qlcnic_adapter *adapter; + struct qlcnic_async_cmd *entry, *tmp; + struct qlcnic_back_channel *bc; struct qlcnic_cmd_args *cmd; + struct list_head *head; + LIST_HEAD(del_list); + + bc = container_of(work, struct qlcnic_back_channel, vf_async_work); + head = &bc->async_cmd_list; + + spin_lock(&bc->queue_lock); + list_splice_init(head, &del_list); + spin_unlock(&bc->queue_lock); + + list_for_each_entry_safe(entry, tmp, &del_list, list) { + list_del(&entry->list); + cmd = entry->cmd; + __qlcnic_sriov_issue_cmd(bc->adapter, cmd); + kfree(entry); + } + + if (!list_empty(head)) + queue_work(bc->bc_async_wq, &bc->vf_async_work); - entry = container_of(work, struct qlcnic_async_work_list, work); - adapter = entry->ptr; - cmd = entry->cmd; - __qlcnic_sriov_issue_cmd(adapter, cmd); return; } -static struct qlcnic_async_work_list * -qlcnic_sriov_get_free_node_async_work(struct qlcnic_back_channel *bc) +static struct qlcnic_async_cmd * +qlcnic_sriov_alloc_async_cmd(struct qlcnic_back_channel *bc, + struct qlcnic_cmd_args *cmd) { - struct list_head *node; - struct qlcnic_async_work_list *entry = NULL; - u8 empty = 0; + struct qlcnic_async_cmd *entry = NULL; - list_for_each(node, &bc->async_list) { - entry = list_entry(node, struct qlcnic_async_work_list, list); - if (!work_pending(&entry->work)) { - empty = 1; - break; - } - } + entry = kzalloc(sizeof(*entry), GFP_ATOMIC); + if (!entry) + return NULL; - if (!empty) { - entry = kzalloc(sizeof(struct qlcnic_async_work_list), - GFP_ATOMIC); - if (entry == NULL) - return NULL; - list_add_tail(&entry->list, &bc->async_list); - } + entry->cmd = cmd; + + spin_lock(&bc->queue_lock); + list_add_tail(&entry->list, &bc->async_cmd_list); + spin_unlock(&bc->queue_lock); return entry; } static void qlcnic_sriov_schedule_async_cmd(struct qlcnic_back_channel *bc, - work_func_t func, void *data, struct qlcnic_cmd_args *cmd) { - struct qlcnic_async_work_list *entry = NULL; + struct qlcnic_async_cmd *entry = NULL; - entry = qlcnic_sriov_get_free_node_async_work(bc); - if (!entry) + entry = qlcnic_sriov_alloc_async_cmd(bc, cmd); + if (!entry) { + qlcnic_free_mbx_args(cmd); + kfree(cmd); return; + } - entry->ptr = data; - entry->cmd = cmd; - INIT_WORK(&entry->work, func); - queue_work(bc->bc_async_wq, &entry->work); + queue_work(bc->bc_async_wq, &bc->vf_async_work); } static int qlcnic_sriov_async_issue_cmd(struct qlcnic_adapter *adapter, @@ -1649,8 +1664,8 @@ static int qlcnic_sriov_async_issue_cmd(struct qlcnic_adapter *adapter, if (adapter->need_fw_reset) return -EIO; - qlcnic_sriov_schedule_async_cmd(bc, qlcnic_sriov_handle_async_issue_cmd, - adapter, cmd); + qlcnic_sriov_schedule_async_cmd(bc, cmd); + return 0; } -- cgit v1.2.3 From fc4ca987f7cc0cb7ea8cb8bb673447939a84bb07 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Wed, 3 Aug 2016 04:02:03 -0400 Subject: qlcnic: fix napi budget alteration Driver modifies the supplied NAPI budget in qlcnic_83xx_msix_tx_poll() function. Instead, it should use the budget as it is. Signed-off-by: Manish Chopra Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 87c642d3b075..fedd7366713c 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -102,7 +102,6 @@ #define QLCNIC_RESPONSE_DESC 0x05 #define QLCNIC_LRO_DESC 0x12 -#define QLCNIC_TX_POLL_BUDGET 128 #define QLCNIC_TCP_HDR_SIZE 20 #define QLCNIC_TCP_TS_OPTION_SIZE 12 #define QLCNIC_FETCH_RING_ID(handle) ((handle) >> 63) @@ -2008,7 +2007,6 @@ static int qlcnic_83xx_msix_tx_poll(struct napi_struct *napi, int budget) struct qlcnic_host_tx_ring *tx_ring; struct qlcnic_adapter *adapter; - budget = QLCNIC_TX_POLL_BUDGET; tx_ring = container_of(napi, struct qlcnic_host_tx_ring, napi); adapter = tx_ring->adapter; work_done = qlcnic_process_cmd_ring(adapter, tx_ring, budget); -- cgit v1.2.3 From b8b2372de9cc00d5ed667c7b8db29b6cfbf037f5 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Wed, 3 Aug 2016 04:02:04 -0400 Subject: qlcnic: Update version to 5.3.65 Signed-off-by: Manish Chopra Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index fd973f4f16c7..49bad00a0f8f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -37,8 +37,8 @@ #define _QLCNIC_LINUX_MAJOR 5 #define _QLCNIC_LINUX_MINOR 3 -#define _QLCNIC_LINUX_SUBVERSION 64 -#define QLCNIC_LINUX_VERSIONID "5.3.64" +#define _QLCNIC_LINUX_SUBVERSION 65 +#define QLCNIC_LINUX_VERSIONID "5.3.65" #define QLCNIC_DRV_IDC_VER 0x01 #define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\ (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION)) -- cgit v1.2.3 From 1bc610e7a17dcf5165f1ed4e0201ee080ba1a0df Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 4 Aug 2016 11:51:25 +0200 Subject: ASoC: samsung: Fix clock handling in S3C24XX_UDA134X card There is no "pclk" alias in the s3c2440 clk driver for "soc-audio" device so related clk_get() fails, which prevents any operation of the S3C24XX_UDA134X sound card. Instead we get the clock on behalf of the I2S device, i.e. we use the I2S block gate clock which has PCLK is its parent clock. Without this patch there is an error like: s3c24xx_uda134x_startup cannot get pclk ASoC: UDA134X startup failed: -2 Signed-off-by: Sylwester Nawrocki Signed-off-by: Mark Brown --- sound/soc/samsung/s3c24xx_uda134x.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/samsung/s3c24xx_uda134x.c b/sound/soc/samsung/s3c24xx_uda134x.c index 50849e137fc0..92e88bca386e 100644 --- a/sound/soc/samsung/s3c24xx_uda134x.c +++ b/sound/soc/samsung/s3c24xx_uda134x.c @@ -58,10 +58,12 @@ static struct platform_device *s3c24xx_uda134x_snd_device; static int s3c24xx_uda134x_startup(struct snd_pcm_substream *substream) { - int ret = 0; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; #ifdef ENFORCE_RATES struct snd_pcm_runtime *runtime = substream->runtime; #endif + int ret = 0; mutex_lock(&clk_lock); pr_debug("%s %d\n", __func__, clk_users); @@ -71,8 +73,7 @@ static int s3c24xx_uda134x_startup(struct snd_pcm_substream *substream) printk(KERN_ERR "%s cannot get xtal\n", __func__); ret = PTR_ERR(xtal); } else { - pclk = clk_get(&s3c24xx_uda134x_snd_device->dev, - "pclk"); + pclk = clk_get(cpu_dai->dev, "iis"); if (IS_ERR(pclk)) { printk(KERN_ERR "%s cannot get pclk\n", __func__); -- cgit v1.2.3 From ca6ac305f017472a172e53345264abdb495eba46 Mon Sep 17 00:00:00 2001 From: John Hsu Date: Thu, 4 Aug 2016 16:52:06 +0800 Subject: ASoC: nau8825: fix bug in playback when suspend In chromium, the following steps will make codec function fail. \1. plug in headphones, Play music \2. run "powerd_dbus_suspend" \3. resume from S3 After resume, the jack detection will restart and make configuration for the headset. Meanwhile, the playback prepares and starts to work. The two sequences will conflict and make wrong register configuration. Originally, the driver adds protection for the case when it finds the playback is active. But the "powerd_dbus_suspend" command will close the pcm stream before suspend. Therefore, the driver can't detect the playback after resume, and the protection not works. For the issue, the driver raises protection every time after resume. The protection will release after jack detection and configuration completes, and then the playback just will goes on. Signed-off-by: John Hsu Signed-off-by: Mark Brown --- sound/soc/codecs/nau8825.c | 51 +++++++++++----------------------------------- 1 file changed, 12 insertions(+), 39 deletions(-) diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 5c9707ac4bbf..20d2f1578b87 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -212,31 +212,6 @@ static const unsigned short logtable[256] = { 0xfa2f, 0xfaea, 0xfba5, 0xfc60, 0xfd1a, 0xfdd4, 0xfe8e, 0xff47 }; -static struct snd_soc_dai *nau8825_get_codec_dai(struct nau8825 *nau8825) -{ - struct snd_soc_codec *codec = snd_soc_dapm_to_codec(nau8825->dapm); - struct snd_soc_component *component = &codec->component; - struct snd_soc_dai *codec_dai, *_dai; - - list_for_each_entry_safe(codec_dai, _dai, &component->dai_list, list) { - if (!strncmp(codec_dai->name, NUVOTON_CODEC_DAI, - strlen(NUVOTON_CODEC_DAI))) - return codec_dai; - } - return NULL; -} - -static bool nau8825_dai_is_active(struct nau8825 *nau8825) -{ - struct snd_soc_dai *codec_dai = nau8825_get_codec_dai(nau8825); - - if (codec_dai) { - if (codec_dai->playback_active || codec_dai->capture_active) - return true; - } - return false; -} - /** * nau8825_sema_acquire - acquire the semaphore of nau88l25 * @nau8825: component to register the codec private data with @@ -1205,6 +1180,8 @@ static int nau8825_hw_params(struct snd_pcm_substream *substream, struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); unsigned int val_len = 0; + nau8825_sema_acquire(nau8825, 2 * HZ); + switch (params_width(params)) { case 16: val_len |= NAU8825_I2S_DL_16; @@ -1225,6 +1202,9 @@ static int nau8825_hw_params(struct snd_pcm_substream *substream, regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL1, NAU8825_I2S_DL_MASK, val_len); + /* Release the semaphone. */ + nau8825_sema_release(nau8825); + return 0; } @@ -1234,6 +1214,8 @@ static int nau8825_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); unsigned int ctrl1_val = 0, ctrl2_val = 0; + nau8825_sema_acquire(nau8825, 2 * HZ); + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBM_CFM: ctrl2_val |= NAU8825_I2S_MS_MASTER; @@ -1282,6 +1264,9 @@ static int nau8825_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, NAU8825_I2S_MS_MASK, ctrl2_val); + /* Release the semaphone. */ + nau8825_sema_release(nau8825); + return 0; } @@ -2241,20 +2226,8 @@ static int __maybe_unused nau8825_resume(struct snd_soc_codec *codec) regcache_cache_only(nau8825->regmap, false); regcache_sync(nau8825->regmap); - if (nau8825_is_jack_inserted(nau8825->regmap)) { - /* If the jack is inserted, we need to check whether the play- - * back is active before suspend. If active, the driver has to - * raise the protection for cross talk function to avoid the - * playback recovers before cross talk process finish. Other- - * wise, the playback will be interfered by cross talk func- - * tion. It is better to apply hardware related parameters - * before starting playback or record. - */ - if (nau8825_dai_is_active(nau8825)) { - nau8825->xtalk_protect = true; - nau8825_sema_acquire(nau8825, 0); - } - } + nau8825->xtalk_protect = true; + nau8825_sema_acquire(nau8825, 0); enable_irq(nau8825->irq); return 0; -- cgit v1.2.3 From 06746c672cdd60715ee57ab1aced95a9e536fd4d Mon Sep 17 00:00:00 2001 From: John Hsu Date: Thu, 4 Aug 2016 16:52:07 +0800 Subject: ASoC: nau8825: fix static check error about semaphone control The patch is to fix the static check error as the following. The patch commit b50455fab459 ("ASoC: nau8825: cross talk suppression measurement function") from Jun 7, 2016, leads to the following static checker warning: sound/soc/codecs/nau8825.c:265 nau8825_sema_acquire() warn: 'sem:&nau8825->xtalk_sem' is sometimes locked here and sometimes unlocked. The semaphone acquire function has return value, and some callers can do error handling when lock fails. Signed-off-by: John Hsu Signed-off-by: Mark Brown --- sound/soc/codecs/nau8825.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 20d2f1578b87..2e59a85e360b 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -225,19 +225,26 @@ static const unsigned short logtable[256] = { * Acquires the semaphore without jiffies. If no more tasks are allowed * to acquire the semaphore, calling this function will put the task to * sleep until the semaphore is released. - * It returns if the semaphore was acquired. + * If the semaphore is not released within the specified number of jiffies, + * this function returns -ETIME. + * If the sleep is interrupted by a signal, this function will return -EINTR. + * It returns 0 if the semaphore was acquired successfully. */ -static void nau8825_sema_acquire(struct nau8825 *nau8825, long timeout) +static int nau8825_sema_acquire(struct nau8825 *nau8825, long timeout) { int ret; - if (timeout) + if (timeout) { ret = down_timeout(&nau8825->xtalk_sem, timeout); - else + if (ret < 0) + dev_warn(nau8825->dev, "Acquire semaphone timeout\n"); + } else { ret = down_interruptible(&nau8825->xtalk_sem); + if (ret < 0) + dev_warn(nau8825->dev, "Acquire semaphone fail\n"); + } - if (ret < 0) - dev_warn(nau8825->dev, "Acquire semaphone fail\n"); + return ret; } /** @@ -1596,8 +1603,11 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) * cess and restore changes if process * is ongoing when ejection. */ + int ret; nau8825->xtalk_protect = true; - nau8825_sema_acquire(nau8825, 0); + ret = nau8825_sema_acquire(nau8825, 0); + if (ret < 0) + nau8825->xtalk_protect = false; } /* Startup cross talk detection process */ nau8825->xtalk_state = NAU8825_XTALK_PREPARE; @@ -2223,11 +2233,14 @@ static int __maybe_unused nau8825_suspend(struct snd_soc_codec *codec) static int __maybe_unused nau8825_resume(struct snd_soc_codec *codec) { struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); + int ret; regcache_cache_only(nau8825->regmap, false); regcache_sync(nau8825->regmap); nau8825->xtalk_protect = true; - nau8825_sema_acquire(nau8825, 0); + ret = nau8825_sema_acquire(nau8825, 0); + if (ret < 0) + nau8825->xtalk_protect = false; enable_irq(nau8825->irq); return 0; -- cgit v1.2.3 From 5d764912a0ee6db83e962c1501b5b9e58ba14e15 Mon Sep 17 00:00:00 2001 From: Adam Thomson Date: Thu, 4 Aug 2016 15:35:37 +0100 Subject: ASoC: da7213: Default to 64 BCLKs per WCLK to support all formats Previously code defaulted to 32 BCLKS per WCLK which meant 24 and 32 bit DAI formats would not work properly. This patch fixes the issue by defaulting to 64 BCLKs per WCLK. Signed-off-by: Adam Thomson Signed-off-by: Mark Brown --- sound/soc/codecs/da7213.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c index e5527bc570ae..bcf1834c5648 100644 --- a/sound/soc/codecs/da7213.c +++ b/sound/soc/codecs/da7213.c @@ -1247,8 +1247,8 @@ static int da7213_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) return -EINVAL; } - /* By default only 32 BCLK per WCLK is supported */ - dai_clk_mode |= DA7213_DAI_BCLKS_PER_WCLK_32; + /* By default only 64 BCLK per WCLK is supported */ + dai_clk_mode |= DA7213_DAI_BCLKS_PER_WCLK_64; snd_soc_write(codec, DA7213_DAI_CLK_MODE, dai_clk_mode); snd_soc_update_bits(codec, DA7213_DAI_CTRL, DA7213_DAI_FORMAT_MASK, -- cgit v1.2.3 From ea0a95d7f162bfa1c9df74471f0064f71cdf80ea Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 25 Jul 2016 07:00:33 +0000 Subject: fcoe: Use kfree_skb() instead of kfree() Use kfree_skb() instead of kfree() to free sk_buff. Signed-off-by: Wei Yongjun Acked-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- drivers/scsi/fcoe/fcoe_ctlr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index a569c65f22b1..dcf36537a767 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -2923,7 +2923,7 @@ static int fcoe_ctlr_vlan_recv(struct fcoe_ctlr *fip, struct sk_buff *skb) mutex_unlock(&fip->ctlr_mutex); drop: - kfree(skb); + kfree_skb(skb); return rc; } -- cgit v1.2.3 From 6b07d9ca9b5363dda959b9582a3fc9c0b89ef3b5 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 2 Aug 2016 11:13:41 +0200 Subject: mac80211: fix purging multicast PS buffer queue The code currently assumes that buffered multicast PS frames don't have a pending ACK frame for tx status reporting. However, hostapd sends a broadcast deauth frame on teardown for which tx status is requested. This can lead to the "Have pending ack frames" warning on module reload. Fix this by using ieee80211_free_txskb/ieee80211_purge_tx_queue. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 2 +- net/mac80211/tx.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 47e99ab8d97a..543b1d4fc33d 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -869,7 +869,7 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) /* free all potentially still buffered bcast frames */ local->total_ps_buffered -= skb_queue_len(&sdata->u.ap.ps.bc_buf); - skb_queue_purge(&sdata->u.ap.ps.bc_buf); + ieee80211_purge_tx_queue(&local->hw, &sdata->u.ap.ps.bc_buf); mutex_lock(&local->mtx); ieee80211_vif_copy_chanctx_to_vlans(sdata, true); diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 91461c415525..502396694f47 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -368,7 +368,7 @@ static void purge_old_ps_buffers(struct ieee80211_local *local) skb = skb_dequeue(&ps->bc_buf); if (skb) { purged++; - dev_kfree_skb(skb); + ieee80211_free_txskb(&local->hw, skb); } total += skb_queue_len(&ps->bc_buf); } @@ -451,7 +451,7 @@ ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx) if (skb_queue_len(&ps->bc_buf) >= AP_MAX_BC_BUFFER) { ps_dbg(tx->sdata, "BC TX buffer full - dropping the oldest frame\n"); - dev_kfree_skb(skb_dequeue(&ps->bc_buf)); + ieee80211_free_txskb(&tx->local->hw, skb_dequeue(&ps->bc_buf)); } else tx->local->total_ps_buffered++; @@ -4275,7 +4275,7 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw, sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev); if (!ieee80211_tx_prepare(sdata, &tx, NULL, skb)) break; - dev_kfree_skb_any(skb); + ieee80211_free_txskb(hw, skb); } info = IEEE80211_SKB_CB(skb); -- cgit v1.2.3 From 71f2c3470fca51be27f6fc5975675f7e1c3b91e5 Mon Sep 17 00:00:00 2001 From: Masashi Honma Date: Tue, 2 Aug 2016 17:16:57 +0900 Subject: mac80211: End the MPSP even if EOSP frame was not acked If QoS frame with EOSP (end of service period) subfield=1 sent by local peer was not acked by remote peer, local peer did not end the MPSP. This prevents local peer from going to DOZE state. And if the remote peer goes away without closing connection, local peer continues AWAKE state and wastes battery. Signed-off-by: Masashi Honma Acked-by: Bob Copeland Signed-off-by: Johannes Berg --- net/mac80211/status.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/net/mac80211/status.c b/net/mac80211/status.c index c6d5c724e032..a2a68269675d 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -771,6 +771,13 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) clear_sta_flag(sta, WLAN_STA_SP); acked = !!(info->flags & IEEE80211_TX_STAT_ACK); + + /* mesh Peer Service Period support */ + if (ieee80211_vif_is_mesh(&sta->sdata->vif) && + ieee80211_is_data_qos(fc)) + ieee80211_mpsp_trigger_process( + ieee80211_get_qos_ctl(hdr), sta, true, acked); + if (!acked && test_sta_flag(sta, WLAN_STA_PS_STA)) { /* * The STA is in power save mode, so assume @@ -781,13 +788,6 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) return; } - /* mesh Peer Service Period support */ - if (ieee80211_vif_is_mesh(&sta->sdata->vif) && - ieee80211_is_data_qos(fc)) - ieee80211_mpsp_trigger_process( - ieee80211_get_qos_ctl(hdr), - sta, true, acked); - if (ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL) && (ieee80211_is_data(hdr->frame_control)) && (rates_idx != -1)) -- cgit v1.2.3 From 9757235f451c27deaa88925399f070ff6fcea832 Mon Sep 17 00:00:00 2001 From: Masashi Honma Date: Wed, 3 Aug 2016 10:07:44 +0900 Subject: nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value Previously, NL80211_MESHCONF_HT_OPMODE validation rejected correct flag combinations, e.g. IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED | IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT. Doing just a range-check allows setting flags that don't exist (0x8) and invalid flag combinations. Implements some checks based on IEEE 802.11 2012 8.4.2.59 "HT Operation element". Signed-off-by: Masashi Honma [reword commit message, simplify a bit] Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 34 +++++++++++++++++++++++++++++++--- 1 file changed, 31 insertions(+), 3 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 46417f9cce68..f02653a08993 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -5380,6 +5380,7 @@ static int nl80211_parse_mesh_config(struct genl_info *info, { struct nlattr *tb[NL80211_MESHCONF_ATTR_MAX + 1]; u32 mask = 0; + u16 ht_opmode; #define FILL_IN_MESH_PARAM_IF_SET(tb, cfg, param, min, max, mask, attr, fn) \ do { \ @@ -5471,9 +5472,36 @@ do { \ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, rssi_threshold, -255, 0, mask, NL80211_MESHCONF_RSSI_THRESHOLD, nl80211_check_s32); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, ht_opmode, 0, 16, - mask, NL80211_MESHCONF_HT_OPMODE, - nl80211_check_u16); + /* + * Check HT operation mode based on + * IEEE 802.11 2012 8.4.2.59 HT Operation element. + */ + if (tb[NL80211_MESHCONF_HT_OPMODE]) { + ht_opmode = nla_get_u16(tb[NL80211_MESHCONF_HT_OPMODE]); + + if (ht_opmode & ~(IEEE80211_HT_OP_MODE_PROTECTION | + IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT | + IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT)) + return -EINVAL; + + if ((ht_opmode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT) && + (ht_opmode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT)) + return -EINVAL; + + switch (ht_opmode & IEEE80211_HT_OP_MODE_PROTECTION) { + case IEEE80211_HT_OP_MODE_PROTECTION_NONE: + case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ: + if (ht_opmode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT) + return -EINVAL; + break; + case IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER: + case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED: + if (!(ht_opmode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT)) + return -EINVAL; + break; + } + cfg->ht_opmode = ht_opmode; + } FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathToRootTimeout, 1, 65535, mask, NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, -- cgit v1.2.3 From 2439ca0402091badb24415e1b073ba12b34ba423 Mon Sep 17 00:00:00 2001 From: Maxim Altshul Date: Thu, 4 Aug 2016 15:43:04 +0300 Subject: mac80211: Add ieee80211_hw pointer to get_expected_throughput The variable is added to allow the driver an easy access to it's own hw->priv when the op is invoked. This fixes a crash in wlcore because it was relying on a station pointer that wasn't initialized yet. It's the wrong way to fix the crash, but it solves the problem for now and it does make sense to have the hw pointer here. Signed-off-by: Maxim Altshul [rewrite commit message, fix indentation] Signed-off-by: Johannes Berg --- drivers/net/wireless/ti/wlcore/main.c | 5 +++-- include/net/mac80211.h | 3 ++- net/mac80211/driver-ops.h | 2 +- 3 files changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 1d689169da76..9e1f2d9c9865 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5700,10 +5700,11 @@ out: mutex_unlock(&wl->mutex); } -static u32 wlcore_op_get_expected_throughput(struct ieee80211_sta *sta) +static u32 wlcore_op_get_expected_throughput(struct ieee80211_hw *hw, + struct ieee80211_sta *sta) { struct wl1271_station *wl_sta = (struct wl1271_station *)sta->drv_priv; - struct wl1271 *wl = wl_sta->wl; + struct wl1271 *wl = hw->priv; u8 hlid = wl_sta->hlid; /* return in units of Kbps */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index b4faadbb4e01..cca510a585c3 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3620,7 +3620,8 @@ struct ieee80211_ops { int (*join_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); void (*leave_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); - u32 (*get_expected_throughput)(struct ieee80211_sta *sta); + u32 (*get_expected_throughput)(struct ieee80211_hw *hw, + struct ieee80211_sta *sta); int (*get_txpower)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, int *dbm); diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index 184473c257eb..ba5fc1f01e53 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -1094,7 +1094,7 @@ static inline u32 drv_get_expected_throughput(struct ieee80211_local *local, trace_drv_get_expected_throughput(sta); if (local->ops->get_expected_throughput) - ret = local->ops->get_expected_throughput(sta); + ret = local->ops->get_expected_throughput(&local->hw, sta); trace_drv_return_u32(local, ret); return ret; -- cgit v1.2.3 From 5ef9f289c4e698054e5687edb54f0da3cdc9173a Mon Sep 17 00:00:00 2001 From: Ian Wienand Date: Wed, 3 Aug 2016 15:44:57 +1000 Subject: OVS: Ignore negative headroom value net_device->ndo_set_rx_headroom (introduced in 871b642adebe300be2e50aa5f65a418510f636ec) says "Setting a negtaive value reset the rx headroom to the default value". It seems that the OVS implementation in 3a927bc7cf9d0fbe8f4a8189dd5f8440228f64e7 overlooked this and sets dev->needed_headroom unconditionally. This doesn't have an immediate effect, but can mess up later LL_RESERVED_SPACE calculations, such as done in net/ipv6/mcast.c:mld_newpack. For reference, this issue was found from a skb_panic raised there after the length calculations had given the wrong result. Note the other current users of this interface (drivers/net/tun.c:tun_set_headroom and drivers/net/veth.c:veth_set_rx_headroom) are both checking this correctly thus need no modification. Thanks to Ben for some pointers from the crash dumps! Cc: Benjamin Poirier Cc: Paolo Abeni Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1361414 Signed-off-by: Ian Wienand Signed-off-by: David S. Miller --- net/openvswitch/vport-internal_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/openvswitch/vport-internal_dev.c b/net/openvswitch/vport-internal_dev.c index 434e04c3a189..95c36147a6e1 100644 --- a/net/openvswitch/vport-internal_dev.c +++ b/net/openvswitch/vport-internal_dev.c @@ -140,7 +140,7 @@ internal_get_stats(struct net_device *dev, struct rtnl_link_stats64 *stats) static void internal_set_rx_headroom(struct net_device *dev, int new_hr) { - dev->needed_headroom = new_hr; + dev->needed_headroom = new_hr < 0 ? 0 : new_hr; } static const struct net_device_ops internal_dev_netdev_ops = { -- cgit v1.2.3 From 54447f1ad73414ebb052e9a33d079cabed3a03e8 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 3 Aug 2016 10:58:35 +0000 Subject: net: arc_emac: add missing of_node_put() in arc_emac_probe() commit a94efbd7cc45 ("ethernet: arc: emac_main: add missing of_node_put after calling of_parse_phandle") added missing of_node_put after calling of_parse_phandle, but missing the devm_ioremap_resource() error handling case. Signed-off-by: Wei Yongjun Reviewed-by: Peter Chen Signed-off-by: David S. Miller --- drivers/net/ethernet/arc/emac_main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c index 4bff0f3040df..b0da9693f28a 100644 --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -771,8 +771,10 @@ int arc_emac_probe(struct net_device *ndev, int interface) priv->dev = dev; priv->regs = devm_ioremap_resource(dev, &res_regs); - if (IS_ERR(priv->regs)) - return PTR_ERR(priv->regs); + if (IS_ERR(priv->regs)) { + err = PTR_ERR(priv->regs); + goto out_put_node; + } dev_dbg(dev, "Registers base address is 0x%p\n", priv->regs); -- cgit v1.2.3 From 372ee16386bbf6dc5eeb0387e1ede963debba82a Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 3 Aug 2016 14:11:40 +0100 Subject: rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[] [] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [] ? mark_held_locks+0x5e/0x74 [] ? __local_bh_enable_ip+0x9b/0xa1 [] ? trace_hardirqs_on_caller+0x16d/0x189 [] lock_acquire+0x122/0x1b6 [] ? lock_acquire+0x122/0x1b6 [] ? skb_dequeue+0x18/0x61 [] _raw_spin_lock_irqsave+0x35/0x49 [] ? skb_dequeue+0x18/0x61 [] skb_dequeue+0x18/0x61 [] afs_deliver_to_call+0x344/0x39d [kafs] [] afs_process_async_call+0x4c/0xd5 [kafs] [] afs_async_workfn+0xe/0x10 [kafs] [] process_one_work+0x29d/0x57c [] worker_thread+0x24a/0x385 [] ? rescuer_thread+0x2d0/0x2d0 [] kthread+0xf3/0xfb [] ret_from_fork+0x1f/0x40 [] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells Signed-off-by: David S. Miller --- Documentation/networking/rxrpc.txt | 21 ++-- fs/afs/cmservice.c | 78 ++++++------- fs/afs/fsclient.c | 221 ++++++++++++------------------------- fs/afs/internal.h | 14 ++- fs/afs/rxrpc.c | 73 +++++++----- fs/afs/vlclient.c | 11 +- include/net/af_rxrpc.h | 2 +- net/rxrpc/ar-internal.h | 1 + net/rxrpc/call_accept.c | 1 + net/rxrpc/call_event.c | 3 + net/rxrpc/call_object.c | 8 +- net/rxrpc/input.c | 12 +- net/rxrpc/recvmsg.c | 25 +---- net/rxrpc/skbuff.c | 41 +++++-- 14 files changed, 225 insertions(+), 286 deletions(-) diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt index 16a924c486bf..70c926ae212d 100644 --- a/Documentation/networking/rxrpc.txt +++ b/Documentation/networking/rxrpc.txt @@ -790,13 +790,12 @@ The kernel interface functions are as follows: Data messages can have their contents extracted with the usual bunch of socket buffer manipulation functions. A data message can be determined to be the last one in a sequence with rxrpc_kernel_is_data_last(). When a - data message has been used up, rxrpc_kernel_data_delivered() should be - called on it.. + data message has been used up, rxrpc_kernel_data_consumed() should be + called on it. - Non-data messages should be handled to rxrpc_kernel_free_skb() to dispose - of. It is possible to get extra refs on all types of message for later - freeing, but this may pin the state of a call until the message is finally - freed. + Messages should be handled to rxrpc_kernel_free_skb() to dispose of. It + is possible to get extra refs on all types of message for later freeing, + but this may pin the state of a call until the message is finally freed. (*) Accept an incoming call. @@ -821,12 +820,14 @@ The kernel interface functions are as follows: Other errors may be returned if the call had been aborted (-ECONNABORTED) or had timed out (-ETIME). - (*) Record the delivery of a data message and free it. + (*) Record the delivery of a data message. - void rxrpc_kernel_data_delivered(struct sk_buff *skb); + void rxrpc_kernel_data_consumed(struct rxrpc_call *call, + struct sk_buff *skb); - This is used to record a data message as having been delivered and to - update the ACK state for the call. The socket buffer will be freed. + This is used to record a data message as having been consumed and to + update the ACK state for the call. The message must still be passed to + rxrpc_kernel_free_skb() for disposal by the caller. (*) Free a message. diff --git a/fs/afs/cmservice.c b/fs/afs/cmservice.c index 4b0eff6da674..85737e96ab8b 100644 --- a/fs/afs/cmservice.c +++ b/fs/afs/cmservice.c @@ -189,11 +189,8 @@ static int afs_deliver_cb_callback(struct afs_call *call, struct sk_buff *skb, case 1: _debug("extract FID count"); ret = afs_extract_data(call, skb, last, &call->tmp, 4); - switch (ret) { - case 0: break; - case -EAGAIN: return 0; - default: return ret; - } + if (ret < 0) + return ret; call->count = ntohl(call->tmp); _debug("FID count: %u", call->count); @@ -210,11 +207,8 @@ static int afs_deliver_cb_callback(struct afs_call *call, struct sk_buff *skb, _debug("extract FID array"); ret = afs_extract_data(call, skb, last, call->buffer, call->count * 3 * 4); - switch (ret) { - case 0: break; - case -EAGAIN: return 0; - default: return ret; - } + if (ret < 0) + return ret; _debug("unmarshall FID array"); call->request = kcalloc(call->count, @@ -239,11 +233,8 @@ static int afs_deliver_cb_callback(struct afs_call *call, struct sk_buff *skb, case 3: _debug("extract CB count"); ret = afs_extract_data(call, skb, last, &call->tmp, 4); - switch (ret) { - case 0: break; - case -EAGAIN: return 0; - default: return ret; - } + if (ret < 0) + return ret; tmp = ntohl(call->tmp); _debug("CB count: %u", tmp); @@ -258,11 +249,8 @@ static int afs_deliver_cb_callback(struct afs_call *call, struct sk_buff *skb, _debug("extract CB array"); ret = afs_extract_data(call, skb, last, call->request, call->count * 3 * 4); - switch (ret) { - case 0: break; - case -EAGAIN: return 0; - default: return ret; - } + if (ret < 0) + return ret; _debug("unmarshall CB array"); cb = call->request; @@ -278,9 +266,9 @@ static int afs_deliver_cb_callback(struct afs_call *call, struct sk_buff *skb, call->unmarshall++; case 5: - _debug("trailer"); - if (skb->len != 0) - return -EBADMSG; + ret = afs_data_complete(call, skb, last); + if (ret < 0) + return ret; /* Record that the message was unmarshalled successfully so * that the call destructor can know do the callback breaking @@ -294,8 +282,6 @@ static int afs_deliver_cb_callback(struct afs_call *call, struct sk_buff *skb, break; } - if (!last) - return 0; call->state = AFS_CALL_REPLYING; @@ -335,13 +321,13 @@ static int afs_deliver_cb_init_call_back_state(struct afs_call *call, { struct afs_server *server; struct in_addr addr; + int ret; _enter(",{%u},%d", skb->len, last); - if (skb->len > 0) - return -EBADMSG; - if (!last) - return 0; + ret = afs_data_complete(call, skb, last); + if (ret < 0) + return ret; /* no unmarshalling required */ call->state = AFS_CALL_REPLYING; @@ -371,8 +357,10 @@ static int afs_deliver_cb_init_call_back_state3(struct afs_call *call, _enter(",{%u},%d", skb->len, last); + /* There are some arguments that we ignore */ + afs_data_consumed(call, skb); if (!last) - return 0; + return -EAGAIN; /* no unmarshalling required */ call->state = AFS_CALL_REPLYING; @@ -408,12 +396,13 @@ static void SRXAFSCB_Probe(struct work_struct *work) static int afs_deliver_cb_probe(struct afs_call *call, struct sk_buff *skb, bool last) { + int ret; + _enter(",{%u},%d", skb->len, last); - if (skb->len > 0) - return -EBADMSG; - if (!last) - return 0; + ret = afs_data_complete(call, skb, last); + if (ret < 0) + return ret; /* no unmarshalling required */ call->state = AFS_CALL_REPLYING; @@ -460,10 +449,9 @@ static int afs_deliver_cb_probe_uuid(struct afs_call *call, struct sk_buff *skb, _enter("{%u},{%u},%d", call->unmarshall, skb->len, last); - if (skb->len > 0) - return -EBADMSG; - if (!last) - return 0; + ret = afs_data_complete(call, skb, last); + if (ret < 0) + return ret; switch (call->unmarshall) { case 0: @@ -509,8 +497,9 @@ static int afs_deliver_cb_probe_uuid(struct afs_call *call, struct sk_buff *skb, break; } - if (!last) - return 0; + ret = afs_data_complete(call, skb, last); + if (ret < 0) + return ret; call->state = AFS_CALL_REPLYING; @@ -588,12 +577,13 @@ static void SRXAFSCB_TellMeAboutYourself(struct work_struct *work) static int afs_deliver_cb_tell_me_about_yourself(struct afs_call *call, struct sk_buff *skb, bool last) { + int ret; + _enter(",{%u},%d", skb->len, last); - if (skb->len > 0) - return -EBADMSG; - if (!last) - return 0; + ret = afs_data_complete(call, skb, last); + if (ret < 0) + return ret; /* no unmarshalling required */ call->state = AFS_CALL_REPLYING; diff --git a/fs/afs/fsclient.c b/fs/afs/fsclient.c index c2e930ec2888..9312b92e54be 100644 --- a/fs/afs/fsclient.c +++ b/fs/afs/fsclient.c @@ -240,15 +240,13 @@ static int afs_deliver_fs_fetch_status(struct afs_call *call, { struct afs_vnode *vnode = call->reply; const __be32 *bp; + int ret; _enter(",,%u", last); - afs_transfer_reply(call, skb); - if (!last) - return 0; - - if (call->reply_size != call->reply_max) - return -EBADMSG; + ret = afs_transfer_reply(call, skb, last); + if (ret < 0) + return ret; /* unmarshall the reply once we've received all of it */ bp = call->buffer; @@ -335,11 +333,8 @@ static int afs_deliver_fs_fetch_data(struct afs_call *call, case 1: _debug("extract data length (MSW)"); ret = afs_extract_data(call, skb, last, &call->tmp, 4); - switch (ret) { - case 0: break; - case -EAGAIN: return 0; - default: return ret; - } + if (ret < 0) + return ret; call->count = ntohl(call->tmp); _debug("DATA length MSW: %u", call->count); @@ -353,11 +348,8 @@ static int afs_deliver_fs_fetch_data(struct afs_call *call, case 2: _debug("extract data length"); ret = afs_extract_data(call, skb, last, &call->tmp, 4); - switch (ret) { - case 0: break; - case -EAGAIN: return 0; - default: return ret; - } + if (ret < 0) + return ret; call->count = ntohl(call->tmp); _debug("DATA length: %u", call->count); @@ -375,11 +367,8 @@ static int afs_deliver_fs_fetch_data(struct afs_call *call, ret = afs_extract_data(call, skb, last, buffer, call->count); kunmap_atomic(buffer); - switch (ret) { - case 0: break; - case -EAGAIN: return 0; - default: return ret; - } + if (ret < 0) + return ret; } call->offset = 0; @@ -389,11 +378,8 @@ static int afs_deliver_fs_fetch_data(struct afs_call *call, case 4: ret = afs_extract_data(call, skb, last, call->buffer, (21 + 3 + 6) * 4); - switch (ret) { - case 0: break; - case -EAGAIN: return 0; - default: return ret; - } + if (ret < 0) + return ret; bp = call->buffer; xdr_decode_AFSFetchStatus(&bp, &vnode->status, vnode, NULL); @@ -405,15 +391,12 @@ static int afs_deliver_fs_fetch_data(struct afs_call *call, call->unmarshall++; case 5: - _debug("trailer"); - if (skb->len != 0) - return -EBADMSG; + ret = afs_data_complete(call, skb, last); + if (ret < 0) + return ret; break; } - if (!last) - return 0; - if (call->count < PAGE_SIZE) { _debug("clear"); page = call->reply3; @@ -537,9 +520,8 @@ static int afs_deliver_fs_give_up_callbacks(struct afs_call *call, { _enter(",{%u},%d", skb->len, last); - if (skb->len > 0) - return -EBADMSG; /* shouldn't be any reply data */ - return 0; + /* shouldn't be any reply data */ + return afs_data_complete(call, skb, last); } /* @@ -622,15 +604,13 @@ static int afs_deliver_fs_create_vnode(struct afs_call *call, { struct afs_vnode *vnode = call->reply; const __be32 *bp; + int ret; _enter("{%u},{%u},%d", call->unmarshall, skb->len, last); - afs_transfer_reply(call, skb); - if (!last) - return 0; - - if (call->reply_size != call->reply_max) - return -EBADMSG; + ret = afs_transfer_reply(call, skb, last); + if (ret < 0) + return ret; /* unmarshall the reply once we've received all of it */ bp = call->buffer; @@ -721,15 +701,13 @@ static int afs_deliver_fs_remove(struct afs_call *call, { struct afs_vnode *vnode = call->reply; const __be32 *bp; + int ret; _enter("{%u},{%u},%d", call->unmarshall, skb->len, last); - afs_transfer_reply(call, skb); - if (!last) - return 0; - - if (call->reply_size != call->reply_max) - return -EBADMSG; + ret = afs_transfer_reply(call, skb, last); + if (ret < 0) + return ret; /* unmarshall the reply once we've received all of it */ bp = call->buffer; @@ -804,15 +782,13 @@ static int afs_deliver_fs_link(struct afs_call *call, { struct afs_vnode *dvnode = call->reply, *vnode = call->reply2; const __be32 *bp; + int ret; _enter("{%u},{%u},%d", call->unmarshall, skb->len, last); - afs_transfer_reply(call, skb); - if (!last) - return 0; - - if (call->reply_size != call->reply_max) - return -EBADMSG; + ret = afs_transfer_reply(call, skb, last); + if (ret < 0) + return ret; /* unmarshall the reply once we've received all of it */ bp = call->buffer; @@ -892,15 +868,13 @@ static int afs_deliver_fs_symlink(struct afs_call *call, { struct afs_vnode *vnode = call->reply; const __be32 *bp; + int ret; _enter("{%u},{%u},%d", call->unmarshall, skb->len, last); - afs_transfer_reply(call, skb); - if (!last) - return 0; - - if (call->reply_size != call->reply_max) - return -EBADMSG; + ret = afs_transfer_reply(call, skb, last); + if (ret < 0) + return ret; /* unmarshall the reply once we've received all of it */ bp = call->buffer; @@ -999,15 +973,13 @@ static int afs_deliver_fs_rename(struct afs_call *call, { struct afs_vnode *orig_dvnode = call->reply, *new_dvnode = call->reply2; const __be32 *bp; + int ret; _enter("{%u},{%u},%d", call->unmarshall, skb->len, last); - afs_transfer_reply(call, skb); - if (!last) - return 0; - - if (call->reply_size != call->reply_max) - return -EBADMSG; + ret = afs_transfer_reply(call, skb, last); + if (ret < 0) + return ret; /* unmarshall the reply once we've received all of it */ bp = call->buffer; @@ -1105,20 +1077,13 @@ static int afs_deliver_fs_store_data(struct afs_call *call, { struct afs_vnode *vnode = call->reply; const __be32 *bp; + int ret; _enter(",,%u", last); - afs_transfer_reply(call, skb); - if (!last) { - _leave(" = 0 [more]"); - return 0; - } - - if (call->reply_size != call->reply_max) { - _leave(" = -EBADMSG [%u != %u]", - call->reply_size, call->reply_max); - return -EBADMSG; - } + ret = afs_transfer_reply(call, skb, last); + if (ret < 0) + return ret; /* unmarshall the reply once we've received all of it */ bp = call->buffer; @@ -1292,20 +1257,13 @@ static int afs_deliver_fs_store_status(struct afs_call *call, afs_dataversion_t *store_version; struct afs_vnode *vnode = call->reply; const __be32 *bp; + int ret; _enter(",,%u", last); - afs_transfer_reply(call, skb); - if (!last) { - _leave(" = 0 [more]"); - return 0; - } - - if (call->reply_size != call->reply_max) { - _leave(" = -EBADMSG [%u != %u]", - call->reply_size, call->reply_max); - return -EBADMSG; - } + ret = afs_transfer_reply(call, skb, last); + if (ret < 0) + return ret; /* unmarshall the reply once we've received all of it */ store_version = NULL; @@ -1504,11 +1462,8 @@ static int afs_deliver_fs_get_volume_status(struct afs_call *call, _debug("extract status"); ret = afs_extract_data(call, skb, last, call->buffer, 12 * 4); - switch (ret) { - case 0: break; - case -EAGAIN: return 0; - default: return ret; - } + if (ret < 0) + return ret; bp = call->buffer; xdr_decode_AFSFetchVolumeStatus(&bp, call->reply2); @@ -1518,11 +1473,8 @@ static int afs_deliver_fs_get_volume_status(struct afs_call *call, /* extract the volume name length */ case 2: ret = afs_extract_data(call, skb, last, &call->tmp, 4); - switch (ret) { - case 0: break; - case -EAGAIN: return 0; - default: return ret; - } + if (ret < 0) + return ret; call->count = ntohl(call->tmp); _debug("volname length: %u", call->count); @@ -1537,11 +1489,8 @@ static int afs_deliver_fs_get_volume_status(struct afs_call *call, if (call->count > 0) { ret = afs_extract_data(call, skb, last, call->reply3, call->count); - switch (ret) { - case 0: break; - case -EAGAIN: return 0; - default: return ret; - } + if (ret < 0) + return ret; } p = call->reply3; @@ -1561,11 +1510,8 @@ static int afs_deliver_fs_get_volume_status(struct afs_call *call, case 4: ret = afs_extract_data(call, skb, last, call->buffer, call->count); - switch (ret) { - case 0: break; - case -EAGAIN: return 0; - default: return ret; - } + if (ret < 0) + return ret; call->offset = 0; call->unmarshall++; @@ -1574,11 +1520,8 @@ static int afs_deliver_fs_get_volume_status(struct afs_call *call, /* extract the offline message length */ case 5: ret = afs_extract_data(call, skb, last, &call->tmp, 4); - switch (ret) { - case 0: break; - case -EAGAIN: return 0; - default: return ret; - } + if (ret < 0) + return ret; call->count = ntohl(call->tmp); _debug("offline msg length: %u", call->count); @@ -1593,11 +1536,8 @@ static int afs_deliver_fs_get_volume_status(struct afs_call *call, if (call->count > 0) { ret = afs_extract_data(call, skb, last, call->reply3, call->count); - switch (ret) { - case 0: break; - case -EAGAIN: return 0; - default: return ret; - } + if (ret < 0) + return ret; } p = call->reply3; @@ -1617,11 +1557,8 @@ static int afs_deliver_fs_get_volume_status(struct afs_call *call, case 7: ret = afs_extract_data(call, skb, last, call->buffer, call->count); - switch (ret) { - case 0: break; - case -EAGAIN: return 0; - default: return ret; - } + if (ret < 0) + return ret; call->offset = 0; call->unmarshall++; @@ -1630,11 +1567,8 @@ static int afs_deliver_fs_get_volume_status(struct afs_call *call, /* extract the message of the day length */ case 8: ret = afs_extract_data(call, skb, last, &call->tmp, 4); - switch (ret) { - case 0: break; - case -EAGAIN: return 0; - default: return ret; - } + if (ret < 0) + return ret; call->count = ntohl(call->tmp); _debug("motd length: %u", call->count); @@ -1649,11 +1583,8 @@ static int afs_deliver_fs_get_volume_status(struct afs_call *call, if (call->count > 0) { ret = afs_extract_data(call, skb, last, call->reply3, call->count); - switch (ret) { - case 0: break; - case -EAGAIN: return 0; - default: return ret; - } + if (ret < 0) + return ret; } p = call->reply3; @@ -1673,26 +1604,20 @@ static int afs_deliver_fs_get_volume_status(struct afs_call *call, case 10: ret = afs_extract_data(call, skb, last, call->buffer, call->count); - switch (ret) { - case 0: break; - case -EAGAIN: return 0; - default: return ret; - } + if (ret < 0) + return ret; call->offset = 0; call->unmarshall++; no_motd_padding: case 11: - _debug("trailer %d", skb->len); - if (skb->len != 0) - return -EBADMSG; + ret = afs_data_complete(call, skb, last); + if (ret < 0) + return ret; break; } - if (!last) - return 0; - _leave(" = 0 [done]"); return 0; } @@ -1764,15 +1689,13 @@ static int afs_deliver_fs_xxxx_lock(struct afs_call *call, struct sk_buff *skb, bool last) { const __be32 *bp; + int ret; _enter("{%u},{%u},%d", call->unmarshall, skb->len, last); - afs_transfer_reply(call, skb); - if (!last) - return 0; - - if (call->reply_size != call->reply_max) - return -EBADMSG; + ret = afs_transfer_reply(call, skb, last); + if (ret < 0) + return ret; /* unmarshall the reply once we've received all of it */ bp = call->buffer; diff --git a/fs/afs/internal.h b/fs/afs/internal.h index 71d5982312f3..df976b2a7f40 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -609,17 +609,29 @@ extern void afs_proc_cell_remove(struct afs_cell *); */ extern int afs_open_socket(void); extern void afs_close_socket(void); +extern void afs_data_consumed(struct afs_call *, struct sk_buff *); extern int afs_make_call(struct in_addr *, struct afs_call *, gfp_t, const struct afs_wait_mode *); extern struct afs_call *afs_alloc_flat_call(const struct afs_call_type *, size_t, size_t); extern void afs_flat_call_destructor(struct afs_call *); -extern void afs_transfer_reply(struct afs_call *, struct sk_buff *); +extern int afs_transfer_reply(struct afs_call *, struct sk_buff *, bool); extern void afs_send_empty_reply(struct afs_call *); extern void afs_send_simple_reply(struct afs_call *, const void *, size_t); extern int afs_extract_data(struct afs_call *, struct sk_buff *, bool, void *, size_t); +static inline int afs_data_complete(struct afs_call *call, struct sk_buff *skb, + bool last) +{ + if (skb->len > 0) + return -EBADMSG; + afs_data_consumed(call, skb); + if (!last) + return -EAGAIN; + return 0; +} + /* * security.c */ diff --git a/fs/afs/rxrpc.c b/fs/afs/rxrpc.c index 4832de84d52c..14d04c848465 100644 --- a/fs/afs/rxrpc.c +++ b/fs/afs/rxrpc.c @@ -150,10 +150,9 @@ void afs_close_socket(void) } /* - * note that the data in a socket buffer is now delivered and that the buffer - * should be freed + * Note that the data in a socket buffer is now consumed. */ -static void afs_data_delivered(struct sk_buff *skb) +void afs_data_consumed(struct afs_call *call, struct sk_buff *skb) { if (!skb) { _debug("DLVR NULL [%d]", atomic_read(&afs_outstanding_skbs)); @@ -161,9 +160,7 @@ static void afs_data_delivered(struct sk_buff *skb) } else { _debug("DLVR %p{%u} [%d]", skb, skb->mark, atomic_read(&afs_outstanding_skbs)); - if (atomic_dec_return(&afs_outstanding_skbs) == -1) - BUG(); - rxrpc_kernel_data_delivered(skb); + rxrpc_kernel_data_consumed(call->rxcall, skb); } } @@ -489,9 +486,15 @@ static void afs_deliver_to_call(struct afs_call *call) last = rxrpc_kernel_is_data_last(skb); ret = call->type->deliver(call, skb, last); switch (ret) { + case -EAGAIN: + if (last) { + _debug("short data"); + goto unmarshal_error; + } + break; case 0: - if (last && - call->state == AFS_CALL_AWAIT_REPLY) + ASSERT(last); + if (call->state == AFS_CALL_AWAIT_REPLY) call->state = AFS_CALL_COMPLETE; break; case -ENOTCONN: @@ -501,6 +504,7 @@ static void afs_deliver_to_call(struct afs_call *call) abort_code = RX_INVALID_OPERATION; goto do_abort; default: + unmarshal_error: abort_code = RXGEN_CC_UNMARSHAL; if (call->state != AFS_CALL_AWAIT_REPLY) abort_code = RXGEN_SS_UNMARSHAL; @@ -511,9 +515,7 @@ static void afs_deliver_to_call(struct afs_call *call) call->state = AFS_CALL_ERROR; break; } - afs_data_delivered(skb); - skb = NULL; - continue; + break; case RXRPC_SKB_MARK_FINAL_ACK: _debug("Rcv ACK"); call->state = AFS_CALL_COMPLETE; @@ -685,15 +687,35 @@ static void afs_process_async_call(struct afs_call *call) } /* - * empty a socket buffer into a flat reply buffer + * Empty a socket buffer into a flat reply buffer. */ -void afs_transfer_reply(struct afs_call *call, struct sk_buff *skb) +int afs_transfer_reply(struct afs_call *call, struct sk_buff *skb, bool last) { size_t len = skb->len; - if (skb_copy_bits(skb, 0, call->buffer + call->reply_size, len) < 0) - BUG(); - call->reply_size += len; + if (len > call->reply_max - call->reply_size) { + _leave(" = -EBADMSG [%zu > %u]", + len, call->reply_max - call->reply_size); + return -EBADMSG; + } + + if (len > 0) { + if (skb_copy_bits(skb, 0, call->buffer + call->reply_size, + len) < 0) + BUG(); + call->reply_size += len; + } + + afs_data_consumed(call, skb); + if (!last) + return -EAGAIN; + + if (call->reply_size != call->reply_max) { + _leave(" = -EBADMSG [%u != %u]", + call->reply_size, call->reply_max); + return -EBADMSG; + } + return 0; } /* @@ -745,7 +767,8 @@ static void afs_collect_incoming_call(struct work_struct *work) } /* - * grab the operation ID from an incoming cache manager call + * Grab the operation ID from an incoming cache manager call. The socket + * buffer is discarded on error or if we don't yet have sufficient data. */ static int afs_deliver_cm_op_id(struct afs_call *call, struct sk_buff *skb, bool last) @@ -766,12 +789,9 @@ static int afs_deliver_cm_op_id(struct afs_call *call, struct sk_buff *skb, call->offset += len; if (call->offset < 4) { - if (last) { - _leave(" = -EBADMSG [op ID short]"); - return -EBADMSG; - } - _leave(" = 0 [incomplete]"); - return 0; + afs_data_consumed(call, skb); + _leave(" = -EAGAIN"); + return -EAGAIN; } call->state = AFS_CALL_AWAIT_REQUEST; @@ -855,7 +875,7 @@ void afs_send_simple_reply(struct afs_call *call, const void *buf, size_t len) } /* - * extract a piece of data from the received data socket buffers + * Extract a piece of data from the received data socket buffers. */ int afs_extract_data(struct afs_call *call, struct sk_buff *skb, bool last, void *buf, size_t count) @@ -873,10 +893,7 @@ int afs_extract_data(struct afs_call *call, struct sk_buff *skb, call->offset += len; if (call->offset < count) { - if (last) { - _leave(" = -EBADMSG [%d < %zu]", call->offset, count); - return -EBADMSG; - } + afs_data_consumed(call, skb); _leave(" = -EAGAIN"); return -EAGAIN; } diff --git a/fs/afs/vlclient.c b/fs/afs/vlclient.c index 340afd0cd182..f94d1abdc3eb 100644 --- a/fs/afs/vlclient.c +++ b/fs/afs/vlclient.c @@ -64,16 +64,13 @@ static int afs_deliver_vl_get_entry_by_xxx(struct afs_call *call, struct afs_cache_vlocation *entry; __be32 *bp; u32 tmp; - int loop; + int loop, ret; _enter(",,%u", last); - afs_transfer_reply(call, skb); - if (!last) - return 0; - - if (call->reply_size != call->reply_max) - return -EBADMSG; + ret = afs_transfer_reply(call, skb, last); + if (ret < 0) + return ret; /* unmarshall the reply once we've received all of it */ entry = call->reply; diff --git a/include/net/af_rxrpc.h b/include/net/af_rxrpc.h index ac1bc3c49fbd..7b0f88699b25 100644 --- a/include/net/af_rxrpc.h +++ b/include/net/af_rxrpc.h @@ -40,12 +40,12 @@ struct rxrpc_call *rxrpc_kernel_begin_call(struct socket *, unsigned long, gfp_t); int rxrpc_kernel_send_data(struct rxrpc_call *, struct msghdr *, size_t); +void rxrpc_kernel_data_consumed(struct rxrpc_call *, struct sk_buff *); void rxrpc_kernel_abort_call(struct rxrpc_call *, u32); void rxrpc_kernel_end_call(struct rxrpc_call *); bool rxrpc_kernel_is_data_last(struct sk_buff *); u32 rxrpc_kernel_get_abort_code(struct sk_buff *); int rxrpc_kernel_get_error_number(struct sk_buff *); -void rxrpc_kernel_data_delivered(struct sk_buff *); void rxrpc_kernel_free_skb(struct sk_buff *); struct rxrpc_call *rxrpc_kernel_accept_call(struct socket *, unsigned long); int rxrpc_kernel_reject_call(struct socket *); diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h index 1bb9e7ac9e14..ff83fb1ddd47 100644 --- a/net/rxrpc/ar-internal.h +++ b/net/rxrpc/ar-internal.h @@ -425,6 +425,7 @@ struct rxrpc_call { spinlock_t lock; rwlock_t state_lock; /* lock for state transition */ atomic_t usage; + atomic_t skb_count; /* Outstanding packets on this call */ atomic_t sequence; /* Tx data packet sequence counter */ u32 local_abort; /* local abort code */ u32 remote_abort; /* remote abort code */ diff --git a/net/rxrpc/call_accept.c b/net/rxrpc/call_accept.c index 0b2832141bd0..9bae21e66d65 100644 --- a/net/rxrpc/call_accept.c +++ b/net/rxrpc/call_accept.c @@ -130,6 +130,7 @@ static int rxrpc_accept_incoming_call(struct rxrpc_local *local, call->state = RXRPC_CALL_SERVER_ACCEPTING; list_add_tail(&call->accept_link, &rx->acceptq); rxrpc_get_call(call); + atomic_inc(&call->skb_count); nsp = rxrpc_skb(notification); nsp->call = call; diff --git a/net/rxrpc/call_event.c b/net/rxrpc/call_event.c index fc32aa5764a2..f5e99163a09e 100644 --- a/net/rxrpc/call_event.c +++ b/net/rxrpc/call_event.c @@ -460,6 +460,7 @@ static void rxrpc_insert_oos_packet(struct rxrpc_call *call, ASSERTCMP(sp->call, ==, NULL); sp->call = call; rxrpc_get_call(call); + atomic_inc(&call->skb_count); /* insert into the buffer in sequence order */ spin_lock_bh(&call->lock); @@ -734,6 +735,7 @@ all_acked: skb->mark = RXRPC_SKB_MARK_FINAL_ACK; sp->call = call; rxrpc_get_call(call); + atomic_inc(&call->skb_count); spin_lock_bh(&call->lock); if (rxrpc_queue_rcv_skb(call, skb, true, true) < 0) BUG(); @@ -793,6 +795,7 @@ static int rxrpc_post_message(struct rxrpc_call *call, u32 mark, u32 error, sp->error = error; sp->call = call; rxrpc_get_call(call); + atomic_inc(&call->skb_count); spin_lock_bh(&call->lock); ret = rxrpc_queue_rcv_skb(call, skb, true, fatal); diff --git a/net/rxrpc/call_object.c b/net/rxrpc/call_object.c index 91287c9d01bb..c47f14fc5e88 100644 --- a/net/rxrpc/call_object.c +++ b/net/rxrpc/call_object.c @@ -491,13 +491,6 @@ void rxrpc_release_call(struct rxrpc_call *call) spin_lock_bh(&call->lock); while ((skb = skb_dequeue(&call->rx_queue)) || (skb = skb_dequeue(&call->rx_oos_queue))) { - sp = rxrpc_skb(skb); - if (sp->call) { - ASSERTCMP(sp->call, ==, call); - rxrpc_put_call(call); - sp->call = NULL; - } - skb->destructor = NULL; spin_unlock_bh(&call->lock); _debug("- zap %s %%%u #%u", @@ -605,6 +598,7 @@ void __rxrpc_put_call(struct rxrpc_call *call) if (atomic_dec_and_test(&call->usage)) { _debug("call %d dead", call->debug_id); + WARN_ON(atomic_read(&call->skb_count) != 0); ASSERTCMP(call->state, ==, RXRPC_CALL_DEAD); rxrpc_queue_work(&call->destroyer); } diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c index 991a20d25093..9e0f58edcd01 100644 --- a/net/rxrpc/input.c +++ b/net/rxrpc/input.c @@ -55,9 +55,6 @@ int rxrpc_queue_rcv_skb(struct rxrpc_call *call, struct sk_buff *skb, if (test_bit(RXRPC_CALL_TERMINAL_MSG, &call->flags)) { _debug("already terminated"); ASSERTCMP(call->state, >=, RXRPC_CALL_COMPLETE); - skb->destructor = NULL; - sp->call = NULL; - rxrpc_put_call(call); rxrpc_free_skb(skb); return 0; } @@ -111,13 +108,7 @@ int rxrpc_queue_rcv_skb(struct rxrpc_call *call, struct sk_buff *skb, ret = 0; out: - /* release the socket buffer */ - if (skb) { - skb->destructor = NULL; - sp->call = NULL; - rxrpc_put_call(call); - rxrpc_free_skb(skb); - } + rxrpc_free_skb(skb); _leave(" = %d", ret); return ret; @@ -200,6 +191,7 @@ static int rxrpc_fast_process_data(struct rxrpc_call *call, sp->call = call; rxrpc_get_call(call); + atomic_inc(&call->skb_count); terminal = ((sp->hdr.flags & RXRPC_LAST_PACKET) && !(sp->hdr.flags & RXRPC_CLIENT_INITIATED)); ret = rxrpc_queue_rcv_skb(call, skb, false, terminal); diff --git a/net/rxrpc/recvmsg.c b/net/rxrpc/recvmsg.c index a3fa2ed85d63..9ed66d533002 100644 --- a/net/rxrpc/recvmsg.c +++ b/net/rxrpc/recvmsg.c @@ -203,6 +203,9 @@ int rxrpc_recvmsg(struct socket *sock, struct msghdr *msg, size_t len, } /* we transferred the whole data packet */ + if (!(flags & MSG_PEEK)) + rxrpc_kernel_data_consumed(call, skb); + if (sp->hdr.flags & RXRPC_LAST_PACKET) { _debug("last"); if (rxrpc_conn_is_client(call->conn)) { @@ -359,28 +362,6 @@ wait_error: } -/** - * rxrpc_kernel_data_delivered - Record delivery of data message - * @skb: Message holding data - * - * Record the delivery of a data message. This permits RxRPC to keep its - * tracking correct. The socket buffer will be deleted. - */ -void rxrpc_kernel_data_delivered(struct sk_buff *skb) -{ - struct rxrpc_skb_priv *sp = rxrpc_skb(skb); - struct rxrpc_call *call = sp->call; - - ASSERTCMP(sp->hdr.seq, >=, call->rx_data_recv); - ASSERTCMP(sp->hdr.seq, <=, call->rx_data_recv + 1); - call->rx_data_recv = sp->hdr.seq; - - ASSERTCMP(sp->hdr.seq, >, call->rx_data_eaten); - rxrpc_free_skb(skb); -} - -EXPORT_SYMBOL(rxrpc_kernel_data_delivered); - /** * rxrpc_kernel_is_data_last - Determine if data message is last one * @skb: Message holding data diff --git a/net/rxrpc/skbuff.c b/net/rxrpc/skbuff.c index eee0cfd9ac8c..06c51d4b622d 100644 --- a/net/rxrpc/skbuff.c +++ b/net/rxrpc/skbuff.c @@ -98,11 +98,39 @@ static void rxrpc_hard_ACK_data(struct rxrpc_call *call, spin_unlock_bh(&call->lock); } +/** + * rxrpc_kernel_data_consumed - Record consumption of data message + * @call: The call to which the message pertains. + * @skb: Message holding data + * + * Record the consumption of a data message and generate an ACK if appropriate. + * The call state is shifted if this was the final packet. The caller must be + * in process context with no spinlocks held. + * + * TODO: Actually generate the ACK here rather than punting this to the + * workqueue. + */ +void rxrpc_kernel_data_consumed(struct rxrpc_call *call, struct sk_buff *skb) +{ + struct rxrpc_skb_priv *sp = rxrpc_skb(skb); + + _enter("%d,%p{%u}", call->debug_id, skb, sp->hdr.seq); + + ASSERTCMP(sp->call, ==, call); + ASSERTCMP(sp->hdr.type, ==, RXRPC_PACKET_TYPE_DATA); + + /* TODO: Fix the sequence number tracking */ + ASSERTCMP(sp->hdr.seq, >=, call->rx_data_recv); + ASSERTCMP(sp->hdr.seq, <=, call->rx_data_recv + 1); + ASSERTCMP(sp->hdr.seq, >, call->rx_data_eaten); + + call->rx_data_recv = sp->hdr.seq; + rxrpc_hard_ACK_data(call, sp); +} +EXPORT_SYMBOL(rxrpc_kernel_data_consumed); + /* - * destroy a packet that has an RxRPC control buffer - * - advance the hard-ACK state of the parent call (done here in case something - * in the kernel bypasses recvmsg() and steals the packet directly off of the - * socket receive queue) + * Destroy a packet that has an RxRPC control buffer */ void rxrpc_packet_destructor(struct sk_buff *skb) { @@ -112,9 +140,8 @@ void rxrpc_packet_destructor(struct sk_buff *skb) _enter("%p{%p}", skb, call); if (call) { - /* send the final ACK on a client call */ - if (sp->hdr.type == RXRPC_PACKET_TYPE_DATA) - rxrpc_hard_ACK_data(call, sp); + if (atomic_dec_return(&call->skb_count) < 0) + BUG(); rxrpc_put_call(call); sp->call = NULL; } -- cgit v1.2.3 From 94d9f1c5906b20053efe375b6d66610bca4b8b64 Mon Sep 17 00:00:00 2001 From: David Forster Date: Wed, 3 Aug 2016 15:13:01 +0100 Subject: ipv4: panic in leaf_walk_rcu due to stale node pointer Panic occurs when issuing "cat /proc/net/route" whilst populating FIB with > 1M routes. Use of cached node pointer in fib_route_get_idx is unsafe. BUG: unable to handle kernel paging request at ffffc90001630024 IP: [] leaf_walk_rcu+0x10/0xe0 PGD 11b08d067 PUD 11b08e067 PMD dac4b067 PTE 0 Oops: 0000 [#1] SMP Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscac snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep virti acpi_cpufreq button parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd tio_ring virtio floppy uhci_hcd ehci_hcd usbcore usb_common libata scsi_mod CPU: 1 PID: 785 Comm: cat Not tainted 4.2.0-rc8+ #4 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 task: ffff8800da1c0bc0 ti: ffff88011a05c000 task.ti: ffff88011a05c000 RIP: 0010:[] [] leaf_walk_rcu+0x10/0xe0 RSP: 0018:ffff88011a05fda0 EFLAGS: 00010202 RAX: ffff8800d8a40c00 RBX: ffff8800da4af940 RCX: ffff88011a05ff20 RDX: ffffc90001630020 RSI: 0000000001013531 RDI: ffff8800da4af950 RBP: 0000000000000000 R08: ffff8800da1f9a00 R09: 0000000000000000 R10: ffff8800db45b7e4 R11: 0000000000000246 R12: ffff8800da4af950 R13: ffff8800d97a74c0 R14: 0000000000000000 R15: ffff8800d97a7480 FS: 00007fd3970e0700(0000) GS:ffff88011fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffc90001630024 CR3: 000000011a7e4000 CR4: 00000000000006e0 Stack: ffffffff814d00d3 0000000000000000 ffff88011a05ff20 ffff8800da1f9a00 ffffffff811dd8b9 0000000000000800 0000000000020000 00007fd396f35000 ffffffff811f8714 0000000000003431 ffffffff8138dce0 0000000000000f80 Call Trace: [] ? fib_route_seq_start+0x93/0xc0 [] ? seq_read+0x149/0x380 [] ? fsnotify+0x3b4/0x500 [] ? process_echoes+0x70/0x70 [] ? proc_reg_read+0x47/0x70 [] ? __vfs_read+0x23/0xd0 [] ? rw_verify_area+0x52/0xf0 [] ? vfs_read+0x81/0x120 [] ? SyS_read+0x42/0xa0 [] ? entry_SYSCALL_64_fastpath+0x16/0x75 Code: 48 85 c0 75 d8 f3 c3 31 c0 c3 f3 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 a 04 89 f0 33 02 44 89 c9 48 d3 e8 0f b6 4a 05 49 89 RIP [] leaf_walk_rcu+0x10/0xe0 RSP CR2: ffffc90001630024 Signed-off-by: Dave Forster Acked-by: Alexander Duyck Signed-off-by: David S. Miller --- net/ipv4/fib_trie.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index d07fc076bea0..febca0f1008c 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -2452,9 +2452,7 @@ struct fib_route_iter { static struct key_vector *fib_route_get_idx(struct fib_route_iter *iter, loff_t pos) { - struct fib_table *tb = iter->main_tb; struct key_vector *l, **tp = &iter->tnode; - struct trie *t; t_key key; /* use cache location of next-to-find key */ @@ -2462,8 +2460,6 @@ static struct key_vector *fib_route_get_idx(struct fib_route_iter *iter, pos -= iter->pos; key = iter->key; } else { - t = (struct trie *)tb->tb_data; - iter->tnode = t->kv; iter->pos = 0; key = 0; } @@ -2504,12 +2500,12 @@ static void *fib_route_seq_start(struct seq_file *seq, loff_t *pos) return NULL; iter->main_tb = tb; + t = (struct trie *)tb->tb_data; + iter->tnode = t->kv; if (*pos != 0) return fib_route_get_idx(iter, *pos); - t = (struct trie *)tb->tb_data; - iter->tnode = t->kv; iter->pos = 0; iter->key = 0; -- cgit v1.2.3 From 5e3b724e2767fb6495df1dcccaf7c79585c78ae9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 3 Aug 2016 21:42:18 +0200 Subject: net: dsa: b53: Add missing ULL suffix for 64-bit constant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On 32-bit (e.g. with m68k-linux-gnu-gcc-4.1): drivers/net/dsa/b53/b53_common.c: In function ‘b53_arl_read’: drivers/net/dsa/b53/b53_common.c:1072: warning: integer constant is too large for ‘long’ type Fixes: 1da6df85c6fbed8f ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- drivers/net/dsa/b53/b53_regs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h index 8f12bddd5dc9..a0b453ea34c9 100644 --- a/drivers/net/dsa/b53/b53_regs.h +++ b/drivers/net/dsa/b53/b53_regs.h @@ -258,7 +258,7 @@ * BCM5325 and BCM5365 share most definitions below */ #define B53_ARLTBL_MAC_VID_ENTRY(n) (0x10 * (n)) -#define ARLTBL_MAC_MASK 0xffffffffffff +#define ARLTBL_MAC_MASK 0xffffffffffffULL #define ARLTBL_VID_S 48 #define ARLTBL_VID_MASK_25 0xff #define ARLTBL_VID_MASK 0xfff -- cgit v1.2.3 From d9dd26b20cff88b45d861ec786d86b1c9bd2ee60 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Sat, 30 Jul 2016 10:05:31 -0700 Subject: MD: hold mddev lock to change bitmap location Changing the location changes a lot of things. Holding the lock to avoid race. This makes the .quiesce called with mddev lock hold too. Acked-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/bitmap.c | 47 +++++++++++++++++++++++++++++++++-------------- 1 file changed, 33 insertions(+), 14 deletions(-) diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 6fff794e0c72..13041ee37ad6 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -2183,19 +2183,29 @@ location_show(struct mddev *mddev, char *page) static ssize_t location_store(struct mddev *mddev, const char *buf, size_t len) { + int rv; + rv = mddev_lock(mddev); + if (rv) + return rv; if (mddev->pers) { - if (!mddev->pers->quiesce) - return -EBUSY; - if (mddev->recovery || mddev->sync_thread) - return -EBUSY; + if (!mddev->pers->quiesce) { + rv = -EBUSY; + goto out; + } + if (mddev->recovery || mddev->sync_thread) { + rv = -EBUSY; + goto out; + } } if (mddev->bitmap || mddev->bitmap_info.file || mddev->bitmap_info.offset) { /* bitmap already configured. Only option is to clear it */ - if (strncmp(buf, "none", 4) != 0) - return -EBUSY; + if (strncmp(buf, "none", 4) != 0) { + rv = -EBUSY; + goto out; + } if (mddev->pers) { mddev->pers->quiesce(mddev, 1); bitmap_destroy(mddev); @@ -2214,21 +2224,25 @@ location_store(struct mddev *mddev, const char *buf, size_t len) /* nothing to be done */; else if (strncmp(buf, "file:", 5) == 0) { /* Not supported yet */ - return -EINVAL; + rv = -EINVAL; + goto out; } else { - int rv; if (buf[0] == '+') rv = kstrtoll(buf+1, 10, &offset); else rv = kstrtoll(buf, 10, &offset); if (rv) - return rv; - if (offset == 0) - return -EINVAL; + goto out; + if (offset == 0) { + rv = -EINVAL; + goto out; + } if (mddev->bitmap_info.external == 0 && mddev->major_version == 0 && - offset != mddev->bitmap_info.default_offset) - return -EINVAL; + offset != mddev->bitmap_info.default_offset) { + rv = -EINVAL; + goto out; + } mddev->bitmap_info.offset = offset; if (mddev->pers) { struct bitmap *bitmap; @@ -2245,7 +2259,7 @@ location_store(struct mddev *mddev, const char *buf, size_t len) mddev->pers->quiesce(mddev, 0); if (rv) { bitmap_destroy(mddev); - return rv; + goto out; } } } @@ -2257,6 +2271,11 @@ location_store(struct mddev *mddev, const char *buf, size_t len) set_bit(MD_CHANGE_DEVS, &mddev->flags); md_wakeup_thread(mddev->thread); } + rv = 0; +out: + mddev_unlock(mddev); + if (rv) + return rv; return len; } -- cgit v1.2.3 From 11367799f3d12a5074c4a3c0fa4ea8da2a21a2a4 Mon Sep 17 00:00:00 2001 From: Alexey Obitotskiy Date: Wed, 3 Aug 2016 10:02:56 +0200 Subject: md: Prevent IO hold during accessing to faulty raid5 array After array enters in faulty state (e.g. number of failed drives becomes more then accepted for raid5 level) it sets error flags (one of this flags is MD_CHANGE_PENDING). For internal metadata arrays MD_CHANGE_PENDING cleared into md_update_sb, but not for external metadata arrays. MD_CHANGE_PENDING flag set prevents to finish all new or non-finished IOs to array and hold them in pending state. In some cases this can leads to deadlock situation. For example, we have faulty array (2 of 4 drives failed) and udev handle array state changes and blkid started (or other userspace application that used array to read/write) but unable to finish reads due to IO hold. At the same time we unable to get exclusive access to array (to stop array in our case) because another external application still use this array. Fix makes possible to return IO with errors immediately. So external application can finish working with array and give exclusive access to other applications to perform required management actions with array. Signed-off-by: Alexey Obitotskiy Signed-off-by: Shaohua Li --- drivers/md/raid5.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index e379b89fd8b1..4f8f5242ea3b 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4640,7 +4640,9 @@ finish: } if (!bio_list_empty(&s.return_bi)) { - if (test_bit(MD_CHANGE_PENDING, &conf->mddev->flags)) { + if (test_bit(MD_CHANGE_PENDING, &conf->mddev->flags) && + (s.failed <= conf->max_degraded || + conf->mddev->external == 0)) { spin_lock_irq(&conf->device_lock); bio_list_merge(&conf->return_bi, &s.return_bi); spin_unlock_irq(&conf->device_lock); -- cgit v1.2.3 From a6ed3ea65d9868fdf9eff84e6fe4f666b8d14b02 Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Fri, 5 Aug 2016 14:01:27 -0700 Subject: bpf: restore behavior of bpf_map_update_elem The introduction of pre-allocated hash elements inadvertently broke the behavior of bpf hash maps where users expected to call bpf_map_update_elem() without considering that the map can be full. Some programs do: old_value = bpf_map_lookup_elem(map, key); if (old_value) { ... prepare new_value on stack ... bpf_map_update_elem(map, key, new_value); } Before pre-alloc the update() for existing element would work even in 'map full' condition. Restore this behavior. The above program could have updated old_value in place instead of update() which would be faster and most programs use that approach, but sometimes the values are large and the programs use update() helper to do atomic replacement of the element. Note we cannot simply update element's value in-place like percpu hash map does and have to allocate extra num_possible_cpu elements and use this extra reserve when the map is full. Fixes: 6c9059817432 ("bpf: pre-allocate hash map elements") Signed-off-by: Alexei Starovoitov Signed-off-by: David S. Miller --- kernel/bpf/hashtab.c | 84 +++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 73 insertions(+), 11 deletions(-) diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c index fff3650d52fc..570eeca7bdfa 100644 --- a/kernel/bpf/hashtab.c +++ b/kernel/bpf/hashtab.c @@ -26,11 +26,18 @@ struct bpf_htab { struct bucket *buckets; void *elems; struct pcpu_freelist freelist; + void __percpu *extra_elems; atomic_t count; /* number of elements in this hashtable */ u32 n_buckets; /* number of hash buckets */ u32 elem_size; /* size of each element in bytes */ }; +enum extra_elem_state { + HTAB_NOT_AN_EXTRA_ELEM = 0, + HTAB_EXTRA_ELEM_FREE, + HTAB_EXTRA_ELEM_USED +}; + /* each htab element is struct htab_elem + key + value */ struct htab_elem { union { @@ -38,7 +45,10 @@ struct htab_elem { struct bpf_htab *htab; struct pcpu_freelist_node fnode; }; - struct rcu_head rcu; + union { + struct rcu_head rcu; + enum extra_elem_state state; + }; u32 hash; char key[0] __aligned(8); }; @@ -113,6 +123,23 @@ free_elems: return err; } +static int alloc_extra_elems(struct bpf_htab *htab) +{ + void __percpu *pptr; + int cpu; + + pptr = __alloc_percpu_gfp(htab->elem_size, 8, GFP_USER | __GFP_NOWARN); + if (!pptr) + return -ENOMEM; + + for_each_possible_cpu(cpu) { + ((struct htab_elem *)per_cpu_ptr(pptr, cpu))->state = + HTAB_EXTRA_ELEM_FREE; + } + htab->extra_elems = pptr; + return 0; +} + /* Called from syscall */ static struct bpf_map *htab_map_alloc(union bpf_attr *attr) { @@ -185,6 +212,8 @@ static struct bpf_map *htab_map_alloc(union bpf_attr *attr) if (percpu) cost += (u64) round_up(htab->map.value_size, 8) * num_possible_cpus() * htab->map.max_entries; + else + cost += (u64) htab->elem_size * num_possible_cpus(); if (cost >= U32_MAX - PAGE_SIZE) /* make sure page count doesn't overflow */ @@ -212,14 +241,22 @@ static struct bpf_map *htab_map_alloc(union bpf_attr *attr) raw_spin_lock_init(&htab->buckets[i].lock); } + if (!percpu) { + err = alloc_extra_elems(htab); + if (err) + goto free_buckets; + } + if (!(attr->map_flags & BPF_F_NO_PREALLOC)) { err = prealloc_elems_and_freelist(htab); if (err) - goto free_buckets; + goto free_extra_elems; } return &htab->map; +free_extra_elems: + free_percpu(htab->extra_elems); free_buckets: kvfree(htab->buckets); free_htab: @@ -349,7 +386,6 @@ static void htab_elem_free(struct bpf_htab *htab, struct htab_elem *l) if (htab->map.map_type == BPF_MAP_TYPE_PERCPU_HASH) free_percpu(htab_elem_get_ptr(l, htab->map.key_size)); kfree(l); - } static void htab_elem_free_rcu(struct rcu_head *head) @@ -370,6 +406,11 @@ static void htab_elem_free_rcu(struct rcu_head *head) static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l) { + if (l->state == HTAB_EXTRA_ELEM_USED) { + l->state = HTAB_EXTRA_ELEM_FREE; + return; + } + if (!(htab->map.map_flags & BPF_F_NO_PREALLOC)) { pcpu_freelist_push(&htab->freelist, &l->fnode); } else { @@ -381,25 +422,44 @@ static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l) static struct htab_elem *alloc_htab_elem(struct bpf_htab *htab, void *key, void *value, u32 key_size, u32 hash, - bool percpu, bool onallcpus) + bool percpu, bool onallcpus, + bool old_elem_exists) { u32 size = htab->map.value_size; bool prealloc = !(htab->map.map_flags & BPF_F_NO_PREALLOC); struct htab_elem *l_new; void __percpu *pptr; + int err = 0; if (prealloc) { l_new = (struct htab_elem *)pcpu_freelist_pop(&htab->freelist); if (!l_new) - return ERR_PTR(-E2BIG); + err = -E2BIG; } else { if (atomic_inc_return(&htab->count) > htab->map.max_entries) { atomic_dec(&htab->count); - return ERR_PTR(-E2BIG); + err = -E2BIG; + } else { + l_new = kmalloc(htab->elem_size, + GFP_ATOMIC | __GFP_NOWARN); + if (!l_new) + return ERR_PTR(-ENOMEM); } - l_new = kmalloc(htab->elem_size, GFP_ATOMIC | __GFP_NOWARN); - if (!l_new) - return ERR_PTR(-ENOMEM); + } + + if (err) { + if (!old_elem_exists) + return ERR_PTR(err); + + /* if we're updating the existing element and the hash table + * is full, use per-cpu extra elems + */ + l_new = this_cpu_ptr(htab->extra_elems); + if (l_new->state != HTAB_EXTRA_ELEM_FREE) + return ERR_PTR(-E2BIG); + l_new->state = HTAB_EXTRA_ELEM_USED; + } else { + l_new->state = HTAB_NOT_AN_EXTRA_ELEM; } memcpy(l_new->key, key, key_size); @@ -489,7 +549,8 @@ static int htab_map_update_elem(struct bpf_map *map, void *key, void *value, if (ret) goto err; - l_new = alloc_htab_elem(htab, key, value, key_size, hash, false, false); + l_new = alloc_htab_elem(htab, key, value, key_size, hash, false, false, + !!l_old); if (IS_ERR(l_new)) { /* all pre-allocated elements are in use or memory exhausted */ ret = PTR_ERR(l_new); @@ -563,7 +624,7 @@ static int __htab_percpu_map_update_elem(struct bpf_map *map, void *key, } } else { l_new = alloc_htab_elem(htab, key, value, key_size, - hash, true, onallcpus); + hash, true, onallcpus, false); if (IS_ERR(l_new)) { ret = PTR_ERR(l_new); goto err; @@ -652,6 +713,7 @@ static void htab_map_free(struct bpf_map *map) htab_free_elems(htab); pcpu_freelist_destroy(&htab->freelist); } + free_percpu(htab->extra_elems); kvfree(htab->buckets); kfree(htab); } -- cgit v1.2.3 From ba0cc3c153590e3d31985b8f8914d205a20b0d7a Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Fri, 5 Aug 2016 14:01:28 -0700 Subject: samples/bpf: add bpf_map_update_elem() tests increase test coverage to check previously missing 'update when full' Signed-off-by: Alexei Starovoitov Signed-off-by: David S. Miller --- samples/bpf/test_maps.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/samples/bpf/test_maps.c b/samples/bpf/test_maps.c index 47bf0858f9e4..cce2b59751eb 100644 --- a/samples/bpf/test_maps.c +++ b/samples/bpf/test_maps.c @@ -68,7 +68,16 @@ static void test_hashmap_sanity(int i, void *data) assert(bpf_update_elem(map_fd, &key, &value, BPF_NOEXIST) == -1 && errno == E2BIG); + /* update existing element, thought the map is full */ + key = 1; + assert(bpf_update_elem(map_fd, &key, &value, BPF_EXIST) == 0); + key = 2; + assert(bpf_update_elem(map_fd, &key, &value, BPF_ANY) == 0); + key = 1; + assert(bpf_update_elem(map_fd, &key, &value, BPF_ANY) == 0); + /* check that key = 0 doesn't exist */ + key = 0; assert(bpf_delete_elem(map_fd, &key) == -1 && errno == ENOENT); /* iterate over two elements */ @@ -413,10 +422,12 @@ static void do_work(int fn, void *data) for (i = fn; i < MAP_SIZE; i += TASKS) { key = value = i; - if (do_update) + if (do_update) { assert(bpf_update_elem(map_fd, &key, &value, BPF_NOEXIST) == 0); - else + assert(bpf_update_elem(map_fd, &key, &value, BPF_EXIST) == 0); + } else { assert(bpf_delete_elem(map_fd, &key) == 0); + } } } -- cgit v1.2.3 From c518189567eaf42b2ec50a4d982484c8e38799f8 Mon Sep 17 00:00:00 2001 From: Harini Katakam Date: Fri, 5 Aug 2016 10:31:58 +0530 Subject: net: macb: Correct CAPS mask USRIO and JUMBO CAPS have the same mask. Fix the same. Fixes: ce721a702197 ("net: ethernet: cadence-macb: Add disabled usrio caps") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Harini Katakam Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h index 36893d8958d4..b6fcf10621b6 100644 --- a/drivers/net/ethernet/cadence/macb.h +++ b/drivers/net/ethernet/cadence/macb.h @@ -403,11 +403,11 @@ #define MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII 0x00000004 #define MACB_CAPS_NO_GIGABIT_HALF 0x00000008 #define MACB_CAPS_USRIO_DISABLED 0x00000010 +#define MACB_CAPS_JUMBO 0x00000020 #define MACB_CAPS_FIFO_MODE 0x10000000 #define MACB_CAPS_GIGABIT_MODE_AVAILABLE 0x20000000 #define MACB_CAPS_SG_DISABLED 0x40000000 #define MACB_CAPS_MACB_IS_GEM 0x80000000 -#define MACB_CAPS_JUMBO 0x00000010 /* Bit manipulation macros */ #define MACB_BIT(name) \ -- cgit v1.2.3 From c5b48fa7e298b9a8968a1c1fc0ef013069ca2dd2 Mon Sep 17 00:00:00 2001 From: Lukasz Odzioba Date: Sat, 23 Jul 2016 01:44:49 +0200 Subject: EDAC, sb_edac: Fix channel reporting on Knights Landing On Intel Xeon Phi Knights Landing processor family the channels of the memory controller have untypical arrangement - MC0 is mapped to CH3,4,5 and MC1 is mapped to CH0,1,2. This causes the EDAC driver to report the channel name incorrectly. We missed this change earlier, so the code already contains similar comment, but the translation function is incorrect. Without this patch: errors in DIMM_A and DIMM_D were reported in DIMM_D errors in DIMM_B and DIMM_E were reported in DIMM_E errors in DIMM_C and DIMM_F were reported in DIMM_F Correct this. Hubert Chrzaniuk: - rebased to 4.8 - comments and code cleanup Fixes: d0cdf9003140 ("sb_edac: Add Knights Landing (Xeon Phi gen 2) support") Reviewed-by: Tony Luck Cc: Mauro Carvalho Chehab Cc: Hubert Chrzaniuk Cc: linux-edac Cc: lukasz.anaczkowski@intel.com Cc: lukasz.odzioba@intel.com Cc: mchehab@kernel.org Cc: # v4.5.. Link: http://lkml.kernel.org/r/1469231089-22837-1-git-send-email-lukasz.odzioba@intel.com Signed-off-by: Lukasz Odzioba [ Boris: Simplify a bit by removing char mc. ] Signed-off-by: Borislav Petkov --- drivers/edac/sb_edac.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c index 4fb2eb7c800d..ce0067b7a2f6 100644 --- a/drivers/edac/sb_edac.c +++ b/drivers/edac/sb_edac.c @@ -552,9 +552,9 @@ static const struct pci_id_table pci_dev_descr_haswell_table[] = { /* Knight's Landing Support */ /* * KNL's memory channels are swizzled between memory controllers. - * MC0 is mapped to CH3,5,6 and MC1 is mapped to CH0,1,2 + * MC0 is mapped to CH3,4,5 and MC1 is mapped to CH0,1,2 */ -#define knl_channel_remap(channel) ((channel + 3) % 6) +#define knl_channel_remap(mc, chan) ((mc) ? (chan) : (chan) + 3) /* Memory controller, TAD tables, error injection - 2-8-0, 2-9-0 (2 of these) */ #define PCI_DEVICE_ID_INTEL_KNL_IMC_MC 0x7840 @@ -1286,7 +1286,7 @@ static u32 knl_get_mc_route(int entry, u32 reg) mc = GET_BITFIELD(reg, entry*3, (entry*3)+2); chan = GET_BITFIELD(reg, (entry*2) + 18, (entry*2) + 18 + 1); - return knl_channel_remap(mc*3 + chan); + return knl_channel_remap(mc, chan); } /* @@ -2997,8 +2997,15 @@ static void sbridge_mce_output_error(struct mem_ctl_info *mci, } else { char A = *("A"); - channel = knl_channel_remap(channel); + /* + * Reported channel is in range 0-2, so we can't map it + * back to mc. To figure out mc we check machine check + * bank register that reported this error. + * bank15 means mc0 and bank16 means mc1. + */ + channel = knl_channel_remap(m->bank == 16, channel); channel_mask = 1 << channel; + snprintf(msg, sizeof(msg), "%s%s err_code:%04x:%04x channel:%d (DIMM_%c)", overflow ? " OVERFLOW" : "", -- cgit v1.2.3 From 707e6835f89419ff1c05e828c2d9939fd95a7ad8 Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Sat, 23 Jul 2016 22:16:56 +0800 Subject: netfilter: nf_ct_h323: do not re-activate already expired timer Commit 96d1327ac2e3 ("netfilter: h323: Use mod_timer instead of set_expect_timeout") just simplify the source codes if (!del_timer(&exp->timeout)) return 0; add_timer(&exp->timeout); to mod_timer(&exp->timeout, jiffies + info->timeout * HZ); This is not correct, and introduce a race codition: CPU0 CPU1 - timer expire process_rcf expectation_timed_out lock(exp_lock) - find_exp waiting exp_lock... re-activate timer!! waiting exp_lock... unlock(exp_lock) lock(exp_lock) - unlink expect - free(expect) - unlock(exp_lock) So when the timer expires again, we will access the memory that was already freed. Replace mod_timer with mod_timer_pending here to fix this problem. Fixes: 96d1327ac2e3 ("netfilter: h323: Use mod_timer instead of set_expect_timeout") Cc: Gao Feng Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_h323_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_h323_main.c b/net/netfilter/nf_conntrack_h323_main.c index bb77a97961bf..5c0db5c64734 100644 --- a/net/netfilter/nf_conntrack_h323_main.c +++ b/net/netfilter/nf_conntrack_h323_main.c @@ -1473,7 +1473,8 @@ static int process_rcf(struct sk_buff *skb, struct nf_conn *ct, "timeout to %u seconds for", info->timeout); nf_ct_dump_tuple(&exp->tuple); - mod_timer(&exp->timeout, jiffies + info->timeout * HZ); + mod_timer_pending(&exp->timeout, + jiffies + info->timeout * HZ); } spin_unlock_bh(&nf_conntrack_expect_lock); } -- cgit v1.2.3 From 2c86943c20e375b0fe562af0626f2e5461d8d203 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sun, 24 Jul 2016 19:53:19 +0200 Subject: netfilter: nf_tables: s/MFT_REG32_01/NFT_REG32_01 MFT_REG32_01 is a typo, rename this to NFT_REG32_01. Signed-off-by: Pablo Neira Ayuso --- include/uapi/linux/netfilter/nf_tables.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h index 01751faccaf8..c674ba2563b7 100644 --- a/include/uapi/linux/netfilter/nf_tables.h +++ b/include/uapi/linux/netfilter/nf_tables.h @@ -24,7 +24,7 @@ enum nft_registers { __NFT_REG_MAX, NFT_REG32_00 = 8, - MFT_REG32_01, + NFT_REG32_01, NFT_REG32_02, NFT_REG32_03, NFT_REG32_04, -- cgit v1.2.3 From 925baf394bb0e65d85330afe467393f66f910353 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Wed, 27 Jul 2016 08:41:49 +0300 Subject: tools/gpio: fix gpio-event-mon header comment Fixes: 97f69747d8b1 ('tools/gpio: add the gpio-event-mon tool') Signed-off-by: Baruch Siach Signed-off-by: Linus Walleij --- tools/gpio/gpio-event-mon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/gpio/gpio-event-mon.c b/tools/gpio/gpio-event-mon.c index 448ed96b3b4f..1c14c2595158 100644 --- a/tools/gpio/gpio-event-mon.c +++ b/tools/gpio/gpio-event-mon.c @@ -1,5 +1,5 @@ /* - * gpio-hammer - example swiss army knife to shake GPIO lines on a system + * gpio-event-mon - monitor GPIO line events from userspace * * Copyright (C) 2016 Linus Walleij * -- cgit v1.2.3 From 626d2f07de89bf6be3d7301524d0ab3375b81b9c Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Thu, 4 Aug 2016 19:59:41 +0900 Subject: dmaengine: usb-dmac: check CHCR.DE bit in usb_dmac_isr_channel() The USB-DMAC's interruption happens even if the CHCR.DE is not set to 1 because CHCR.NULLE is set to 1. So, this driver should call usb_dmac_isr_transfer_end() if the DE bit is set to 1 only. Otherwise, the desc is possible to be NULL in the usb_dmac_isr_transfer_end(). Fixes: 0c1c8ff32fa2 ("dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver) Cc: # v4.1+ Signed-off-by: Yoshihiro Shimoda Signed-off-by: Vinod Koul --- drivers/dma/sh/usb-dmac.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/dma/sh/usb-dmac.c b/drivers/dma/sh/usb-dmac.c index 749f1bd5d65d..06ecdc38cee0 100644 --- a/drivers/dma/sh/usb-dmac.c +++ b/drivers/dma/sh/usb-dmac.c @@ -600,27 +600,30 @@ static irqreturn_t usb_dmac_isr_channel(int irq, void *dev) { struct usb_dmac_chan *chan = dev; irqreturn_t ret = IRQ_NONE; - u32 mask = USB_DMACHCR_TE; - u32 check_bits = USB_DMACHCR_TE | USB_DMACHCR_SP; + u32 mask = 0; u32 chcr; + bool xfer_end = false; spin_lock(&chan->vc.lock); chcr = usb_dmac_chan_read(chan, USB_DMACHCR); - if (chcr & check_bits) - mask |= USB_DMACHCR_DE | check_bits; + if (chcr & (USB_DMACHCR_TE | USB_DMACHCR_SP)) { + mask |= USB_DMACHCR_DE | USB_DMACHCR_TE | USB_DMACHCR_SP; + if (chcr & USB_DMACHCR_DE) + xfer_end = true; + ret |= IRQ_HANDLED; + } if (chcr & USB_DMACHCR_NULL) { /* An interruption of TE will happen after we set FTE */ mask |= USB_DMACHCR_NULL; chcr |= USB_DMACHCR_FTE; ret |= IRQ_HANDLED; } - usb_dmac_chan_write(chan, USB_DMACHCR, chcr & ~mask); + if (mask) + usb_dmac_chan_write(chan, USB_DMACHCR, chcr & ~mask); - if (chcr & check_bits) { + if (xfer_end) usb_dmac_isr_transfer_end(chan); - ret |= IRQ_HANDLED; - } spin_unlock(&chan->vc.lock); -- cgit v1.2.3 From c1eda3c6394f805886b2afa8c7ea5e04305ec698 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 1 Aug 2016 13:13:08 +0200 Subject: netfilter: nft_rbtree: ignore inactive matching element with no descendants If we find a matching element that is inactive with no descendants, we jump to the found label, then crash because of nul-dereference on the left branch. Fix this by checking that the element is active and not an interval end and skipping the logic that only applies to the tree iteration. Signed-off-by: Pablo Neira Ayuso Tested-by: Anders K. Pedersen --- net/netfilter/nft_rbtree.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/netfilter/nft_rbtree.c b/net/netfilter/nft_rbtree.c index 6473936d05c6..ffe9ae062d23 100644 --- a/net/netfilter/nft_rbtree.c +++ b/net/netfilter/nft_rbtree.c @@ -70,7 +70,6 @@ static bool nft_rbtree_lookup(const struct net *net, const struct nft_set *set, } else if (d > 0) parent = parent->rb_right; else { -found: if (!nft_set_elem_active(&rbe->ext, genmask)) { parent = parent->rb_left; continue; @@ -84,9 +83,12 @@ found: } } - if (set->flags & NFT_SET_INTERVAL && interval != NULL) { - rbe = interval; - goto found; + if (set->flags & NFT_SET_INTERVAL && interval != NULL && + nft_set_elem_active(&interval->ext, genmask) && + !nft_rbtree_interval_end(interval)) { + spin_unlock_bh(&nft_rbtree_lock); + *ext = &interval->ext; + return true; } out: spin_unlock_bh(&nft_rbtree_lock); -- cgit v1.2.3 From cf1b18030de29e4e5b0a57695ae5db4a89da0ff7 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sun, 24 Jul 2016 13:53:30 +0200 Subject: USB: serial: option: add D-Link DWM-156/A3 The device has four interfaces; the three serial ports ought to be handled by this driver: 00 Diagnostic interface serial port 01 NMEA device serial port 02 Mass storage (sd card) 03 Modem serial port The other product ids listed in the Windows driver are present already. Signed-off-by: Lubomir Rintel Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 8e07536c233a..0338851e31a2 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1966,6 +1966,7 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */ { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */ { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) }, { USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) }, -- cgit v1.2.3 From 0d35d0815b19216f852f257afe420f7c7d182780 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Wed, 3 Aug 2016 12:41:40 +0200 Subject: netfilter: nf_conntrack_sip: CSeq 0 is a valid CSeq Do not drop packet when CSeq is 0 as 0 is also a valid value for CSeq. simple_strtoul() will return 0 either when all digits are 0 or if there are no digits at all. Therefore when simple_strtoul() returns 0 we check if first character is digit 0 or not. Signed-off-by: Christophe Leroy Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_sip.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index 8d9db9d4702b..7d77217de6a3 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -1383,7 +1383,7 @@ static int process_sip_response(struct sk_buff *skb, unsigned int protoff, return NF_DROP; } cseq = simple_strtoul(*dptr + matchoff, NULL, 10); - if (!cseq) { + if (!cseq && *(*dptr + matchoff) != '0') { nf_ct_helper_log(skb, ct, "cannot get cseq"); return NF_DROP; } @@ -1446,7 +1446,7 @@ static int process_sip_request(struct sk_buff *skb, unsigned int protoff, return NF_DROP; } cseq = simple_strtoul(*dptr + matchoff, NULL, 10); - if (!cseq) { + if (!cseq && *(*dptr + matchoff) != '0') { nf_ct_helper_log(skb, ct, "cannot get cseq"); return NF_DROP; } -- cgit v1.2.3 From 6977495c06f7f47636a076ee5a0ca571279d9697 Mon Sep 17 00:00:00 2001 From: Robert Deliën Date: Thu, 28 Jul 2016 18:52:55 +0000 Subject: USB: serial: ftdi_sio: add PIDs for Ivium Technologies devices Ivium Technologies uses the FTDI VID with custom PIDs for their line of electrochemical interfaces and the PalmSens they developed for PalmSens BV. Signed-off-by: Robert Delien Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 00820809139a..8962cdcfe9ff 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -648,6 +648,8 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PALMSENS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_IVIUM_XSTAT_PID) }, { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) }, { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) }, { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index c5d6c1e73e8e..067e3a6300d1 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -405,6 +405,12 @@ #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 #define FTDI_4N_GALAXY_DE_3_PID 0xF3C2 +/* + * Ivium Technologies product IDs + */ +#define FTDI_PALMSENS_PID 0xf440 +#define FTDI_IVIUM_XSTAT_PID 0xf441 + /* * Linx Technologies product ids */ -- cgit v1.2.3 From ae34d12cc1e212ffcd92e069030e54dae69c832f Mon Sep 17 00:00:00 2001 From: "Sheng-Hui J. Chu" Date: Thu, 28 Jul 2016 17:01:45 -0400 Subject: USB: serial: ftdi_sio: add device ID for WICED USB UART dev board BCM20706V2_EVAL is a WICED dev board designed with FT2232H USB 2.0 UART/FIFO IC. To support BCM920706V2_EVAL dev board for WICED development on Linux. Add the VID(0a5c) and PID(6422) to ftdi_sio driver to allow loading ftdi_sio for this board. Signed-off-by: Sheng-Hui J. Chu Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8962cdcfe9ff..b2d767e743fc 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1010,6 +1010,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(ICPDAS_VID, ICPDAS_I7560U_PID) }, { USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) }, { USB_DEVICE(ICPDAS_VID, ICPDAS_I7563U_PID) }, + { USB_DEVICE(WICED_VID, WICED_USB20706V2_PID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 067e3a6300d1..f87a938cf005 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -678,6 +678,12 @@ #define INTREPID_VALUECAN_PID 0x0601 #define INTREPID_NEOVI_PID 0x0701 +/* + * WICED USB UART + */ +#define WICED_VID 0x0A5C +#define WICED_USB20706V2_PID 0x6422 + /* * Definitions for ID TECH (www.idt-net.com) devices */ -- cgit v1.2.3 From 01d7956b58e644ea0d2e8d9340c5727a8fc39d70 Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Tue, 2 Aug 2016 11:29:25 +0200 Subject: USB: serial: option: add support for Telit LE920A4 This patch adds a set of compositions for Telit LE920A4. Compositions in short are: 0x1207: tty + tty 0x1208: tty + adb + tty + tty 0x1211: tty + adb + ecm 0x1212: tty + adb 0x1213: ecm + tty 0x1214: tty + adb + ecm + tty telit_le922_blacklist_usbcfg3 is reused for compositions 0x1211 and 0x1214 due to the same interfaces positions. Signed-off-by: Daniele Palmas Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 0338851e31a2..bc472584a229 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -274,6 +274,12 @@ static void option_instat_callback(struct urb *urb); #define TELIT_PRODUCT_LE920 0x1200 #define TELIT_PRODUCT_LE910 0x1201 #define TELIT_PRODUCT_LE910_USBCFG4 0x1206 +#define TELIT_PRODUCT_LE920A4_1207 0x1207 +#define TELIT_PRODUCT_LE920A4_1208 0x1208 +#define TELIT_PRODUCT_LE920A4_1211 0x1211 +#define TELIT_PRODUCT_LE920A4_1212 0x1212 +#define TELIT_PRODUCT_LE920A4_1213 0x1213 +#define TELIT_PRODUCT_LE920A4_1214 0x1214 /* ZTE PRODUCTS */ #define ZTE_VENDOR_ID 0x19d2 @@ -628,6 +634,11 @@ static const struct option_blacklist_info telit_le920_blacklist = { .reserved = BIT(1) | BIT(5), }; +static const struct option_blacklist_info telit_le920a4_blacklist_1 = { + .sendsetup = BIT(0), + .reserved = BIT(1), +}; + static const struct option_blacklist_info telit_le922_blacklist_usbcfg0 = { .sendsetup = BIT(2), .reserved = BIT(0) | BIT(1) | BIT(3), @@ -1203,6 +1214,16 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920), .driver_info = (kernel_ulong_t)&telit_le920_blacklist }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1207) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1208), + .driver_info = (kernel_ulong_t)&telit_le920a4_blacklist_1 }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1211), + .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1212), + .driver_info = (kernel_ulong_t)&telit_le920a4_blacklist_1 }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214), + .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, -- cgit v1.2.3 From 647024a7df36014bbc4479d92d88e6b77c0afcf6 Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Mon, 8 Aug 2016 02:34:46 +0100 Subject: USB: serial: fix memleak in driver-registration error path udriver struct allocated by kzalloc() will not be freed if usb_register() and next calls fail. This patch fixes this by adding one more step with kfree(udriver) in error path. Signed-off-by: Alexey Klimov Acked-by: Alan Stern Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/usb-serial.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index b1b9bac44016..d213cf44a7e4 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1433,7 +1433,7 @@ int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[] rc = usb_register(udriver); if (rc) - return rc; + goto failed_usb_register; for (sd = serial_drivers; *sd; ++sd) { (*sd)->usb_driver = udriver; @@ -1451,6 +1451,8 @@ int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[] while (sd-- > serial_drivers) usb_serial_deregister(*sd); usb_deregister(udriver); +failed_usb_register: + kfree(udriver); return rc; } EXPORT_SYMBOL_GPL(usb_serial_register_drivers); -- cgit v1.2.3 From 0956254a2d5b9e2141385514553aeef694dfe3b5 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 8 Aug 2016 15:08:49 +0200 Subject: ovl: don't copy up opaqueness When a copy up of a directory occurs which has the opaque xattr set, the xattr remains in the upper directory. The immediate behavior with overlayfs is that the upper directory is not treated as opaque, however after a remount the opaque flag is used and upper directory is treated as opaque. This causes files created in the lower layer to be hidden when using multiple lower directories. Fix by not copying up the opaque flag. To reproduce: ----8<---------8<---------8<---------8<---------8<---------8<---- mkdir -p l/d/s u v w mnt mount -t overlay overlay -olowerdir=l,upperdir=u,workdir=w mnt rm -rf mnt/d/ mkdir -p mnt/d/n umount mnt mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt touch mnt/d/foo umount mnt mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt ls mnt/d ----8<---------8<---------8<---------8<---------8<---------8<---- output should be: "foo n" Reported-by: Derek McGowan Link: https://bugzilla.kernel.org/show_bug.cgi?id=151291 Signed-off-by: Miklos Szeredi Cc: --- fs/overlayfs/copy_up.c | 2 ++ fs/overlayfs/inode.c | 2 +- fs/overlayfs/overlayfs.h | 1 + 3 files changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c index 54e5d6681786..43fdc2765aea 100644 --- a/fs/overlayfs/copy_up.c +++ b/fs/overlayfs/copy_up.c @@ -80,6 +80,8 @@ int ovl_copy_xattr(struct dentry *old, struct dentry *new) } for (name = buf; name < (buf + list_size); name += strlen(name) + 1) { + if (ovl_is_private_xattr(name)) + continue; retry: size = vfs_getxattr(old, name, value, value_size); if (size == -ERANGE) diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c index 1b885c156028..024352f1d405 100644 --- a/fs/overlayfs/inode.c +++ b/fs/overlayfs/inode.c @@ -191,7 +191,7 @@ static int ovl_readlink(struct dentry *dentry, char __user *buf, int bufsiz) return err; } -static bool ovl_is_private_xattr(const char *name) +bool ovl_is_private_xattr(const char *name) { #define OVL_XATTR_PRE_NAME OVL_XATTR_PREFIX "." return strncmp(name, OVL_XATTR_PRE_NAME, diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h index e4f5c9536bfe..34839bd2b6b8 100644 --- a/fs/overlayfs/overlayfs.h +++ b/fs/overlayfs/overlayfs.h @@ -193,6 +193,7 @@ int ovl_removexattr(struct dentry *dentry, const char *name); struct posix_acl *ovl_get_acl(struct inode *inode, int type); int ovl_open_maybe_copy_up(struct dentry *dentry, unsigned int file_flags); int ovl_update_time(struct inode *inode, struct timespec *ts, int flags); +bool ovl_is_private_xattr(const char *name); struct inode *ovl_new_inode(struct super_block *sb, umode_t mode); struct inode *ovl_get_inode(struct super_block *sb, struct inode *realinode); -- cgit v1.2.3 From bf47dc572aaf53c3f2311c71e03ec01be3131fd6 Mon Sep 17 00:00:00 2001 From: Sascha Silbe Date: Mon, 4 Jul 2016 17:16:47 +0200 Subject: s390: clarify compressed image code path The way the decompressor is hooked into the start-up code is rather subtle, with a mix of multiply-defined symbols and hardcoded address literals. Add some comments at the junction points to clarify how it works. Signed-off-by: Sascha Silbe Signed-off-by: Martin Schwidefsky --- arch/s390/boot/compressed/head.S | 11 ++++++++--- arch/s390/kernel/head.S | 4 +++- 2 files changed, 11 insertions(+), 4 deletions(-) diff --git a/arch/s390/boot/compressed/head.S b/arch/s390/boot/compressed/head.S index f86a4eef28a9..28c4f96a2d9c 100644 --- a/arch/s390/boot/compressed/head.S +++ b/arch/s390/boot/compressed/head.S @@ -21,16 +21,21 @@ ENTRY(startup_continue) lg %r15,.Lstack-.LPG1(%r13) aghi %r15,-160 brasl %r14,decompress_kernel - # setup registers for memory mover & branch to target + # Set up registers for memory mover. We move the decompressed image to + # 0x11000, starting at offset 0x11000 in the decompressed image so + # that code living at 0x11000 in the image will end up at 0x11000 in + # memory. lgr %r4,%r2 lg %r2,.Loffset-.LPG1(%r13) la %r4,0(%r2,%r4) lg %r3,.Lmvsize-.LPG1(%r13) lgr %r5,%r3 - # move the memory mover someplace safe + # Move the memory mover someplace safe so it doesn't overwrite itself. la %r1,0x200 mvc 0(mover_end-mover,%r1),mover-.LPG1(%r13) - # decompress image is started at 0x11000 + # When the memory mover is done we pass control to + # arch/s390/kernel/head64.S:startup_continue which lives at 0x11000 in + # the decompressed image. lgr %r6,%r2 br %r1 mover: diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index 56e4d8234ef2..4431905f8cfa 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -309,7 +309,9 @@ ENTRY(startup_kdump) l %r15,.Lstack-.LPG0(%r13) ahi %r15,-STACK_FRAME_OVERHEAD brasl %r14,verify_facilities - /* Continue with startup code in head64.S */ +# For uncompressed images, continue in +# arch/s390/kernel/head64.S. For compressed images, continue in +# arch/s390/boot/compressed/head.S. jg startup_continue .Lstack: -- cgit v1.2.3 From 134a24cd895c5d138d639a0741ad27e389cd4562 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 3 Aug 2016 17:55:00 +0200 Subject: s390/crc32-vx: Fix checksum calculation for small sizes The current prealign logic will fail for sizes < alignment, as the new datalen passed to the vector function is smaller than zero. Being a size_t this gets wrapped to a huge number causing memory overruns and wrong data. Let's add an early exit if the size is smaller than the minimal size with alignment. This will also avoid calling the software fallback twice for all sizes smaller than the minimum size (prealign + remaining) Signed-off-by: Christian Borntraeger Fixes: f848dbd3bc1a ("s390/crc32-vx: add crypto API module for optimized CRC-32 algorithms") Reviewed-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky --- arch/s390/crypto/crc32-vx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/s390/crypto/crc32-vx.c b/arch/s390/crypto/crc32-vx.c index 577ae1d4ae89..2bad9d837029 100644 --- a/arch/s390/crypto/crc32-vx.c +++ b/arch/s390/crypto/crc32-vx.c @@ -51,6 +51,9 @@ u32 crc32c_le_vgfm_16(u32 crc, unsigned char const *buf, size_t size); struct kernel_fpu vxstate; \ unsigned long prealign, aligned, remaining; \ \ + if (datalen < VX_MIN_LEN + VX_ALIGN_MASK) \ + return ___crc32_sw(crc, data, datalen); \ + \ if ((unsigned long)data & VX_ALIGN_MASK) { \ prealign = VX_ALIGNMENT - \ ((unsigned long)data & VX_ALIGN_MASK); \ @@ -59,9 +62,6 @@ u32 crc32c_le_vgfm_16(u32 crc, unsigned char const *buf, size_t size); data = (void *)((unsigned long)data + prealign); \ } \ \ - if (datalen < VX_MIN_LEN) \ - return ___crc32_sw(crc, data, datalen); \ - \ aligned = datalen & ~VX_ALIGN_MASK; \ remaining = datalen & VX_ALIGN_MASK; \ \ -- cgit v1.2.3 From e2efc424549eb66d227dfe6d073d1789a24bc698 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 4 Aug 2016 10:24:30 +0200 Subject: s390/lib: fix memcmp and strstr if two string compare equal the clcle instruction will update the string addresses to point _after_ the string. This might already be on a different page, so we should not use these pointer to calculate the difference as in that case the calculation of the difference can cause oopses. The return value of memcmp does not need the difference, we can just reuse the condition code and return for CC=1 (All bytes compared, first operand low) -1 and for CC=2 (All bytes compared, first operand high) +1 strstr also does not need the diff. While fixing this, make the common function clcle "correct on its own" by using l1 instead of l2 for the first length. strstr will call this with l2 for both strings. Signed-off-by: Christian Borntraeger Fixes: db7f5eef3dc0 ("s390/lib: use basic blocks for inline assemblies") Reviewed-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/lib/string.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/arch/s390/lib/string.c b/arch/s390/lib/string.c index e390bbb16443..48352bffbc92 100644 --- a/arch/s390/lib/string.c +++ b/arch/s390/lib/string.c @@ -237,11 +237,10 @@ char * strrchr(const char * s, int c) EXPORT_SYMBOL(strrchr); static inline int clcle(const char *s1, unsigned long l1, - const char *s2, unsigned long l2, - int *diff) + const char *s2, unsigned long l2) { register unsigned long r2 asm("2") = (unsigned long) s1; - register unsigned long r3 asm("3") = (unsigned long) l2; + register unsigned long r3 asm("3") = (unsigned long) l1; register unsigned long r4 asm("4") = (unsigned long) s2; register unsigned long r5 asm("5") = (unsigned long) l2; int cc; @@ -252,7 +251,6 @@ static inline int clcle(const char *s1, unsigned long l1, " srl %0,28" : "=&d" (cc), "+a" (r2), "+a" (r3), "+a" (r4), "+a" (r5) : : "cc"); - *diff = *(char *)r2 - *(char *)r4; return cc; } @@ -270,9 +268,9 @@ char * strstr(const char * s1,const char * s2) return (char *) s1; l1 = __strend(s1) - s1; while (l1-- >= l2) { - int cc, dummy; + int cc; - cc = clcle(s1, l1, s2, l2, &dummy); + cc = clcle(s1, l2, s2, l2); if (!cc) return (char *) s1; s1++; @@ -313,11 +311,11 @@ EXPORT_SYMBOL(memchr); */ int memcmp(const void *cs, const void *ct, size_t n) { - int ret, diff; + int ret; - ret = clcle(cs, n, ct, n, &diff); + ret = clcle(cs, n, ct, n); if (ret) - ret = diff; + ret = ret == 1 ? -1 : 1; return ret; } EXPORT_SYMBOL(memcmp); -- cgit v1.2.3 From 6e127efeeae5bbbc323e028d96c43dec0cc7b1b8 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 4 Aug 2016 12:51:09 +0200 Subject: s390/config: make the vector optimized crc function builtin For all configs with CONFIG_BTRFS_FS = y we should also make the optimized crc module builtin. Otherwise early mounts will fall back to the software variant. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- arch/s390/configs/default_defconfig | 2 +- arch/s390/configs/gcov_defconfig | 2 +- arch/s390/configs/performance_defconfig | 2 +- arch/s390/defconfig | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/s390/configs/default_defconfig b/arch/s390/configs/default_defconfig index 889ea3450210..26e0c7f08814 100644 --- a/arch/s390/configs/default_defconfig +++ b/arch/s390/configs/default_defconfig @@ -678,7 +678,7 @@ CONFIG_CRYPTO_SHA512_S390=m CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m CONFIG_CRYPTO_GHASH_S390=m -CONFIG_CRYPTO_CRC32_S390=m +CONFIG_CRYPTO_CRC32_S390=y CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m CONFIG_X509_CERTIFICATE_PARSER=m diff --git a/arch/s390/configs/gcov_defconfig b/arch/s390/configs/gcov_defconfig index 1bcfd764910a..24879dab47bc 100644 --- a/arch/s390/configs/gcov_defconfig +++ b/arch/s390/configs/gcov_defconfig @@ -616,7 +616,7 @@ CONFIG_CRYPTO_SHA512_S390=m CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m CONFIG_CRYPTO_GHASH_S390=m -CONFIG_CRYPTO_CRC32_S390=m +CONFIG_CRYPTO_CRC32_S390=y CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m CONFIG_X509_CERTIFICATE_PARSER=m diff --git a/arch/s390/configs/performance_defconfig b/arch/s390/configs/performance_defconfig index 13ff090139c8..a5c1e5f2a0ca 100644 --- a/arch/s390/configs/performance_defconfig +++ b/arch/s390/configs/performance_defconfig @@ -615,7 +615,7 @@ CONFIG_CRYPTO_SHA512_S390=m CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m CONFIG_CRYPTO_GHASH_S390=m -CONFIG_CRYPTO_CRC32_S390=m +CONFIG_CRYPTO_CRC32_S390=y CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m CONFIG_X509_CERTIFICATE_PARSER=m diff --git a/arch/s390/defconfig b/arch/s390/defconfig index ccccebeeaaf6..73610f2e3b4f 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -234,7 +234,7 @@ CONFIG_CRYPTO_SHA256_S390=m CONFIG_CRYPTO_SHA512_S390=m CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m -CONFIG_CRYPTO_CRC32_S390=m +CONFIG_CRYPTO_CRC32_S390=y CONFIG_CRC7=m # CONFIG_XZ_DEC_X86 is not set # CONFIG_XZ_DEC_POWERPC is not set -- cgit v1.2.3 From 7de6a63ca2ff21ea67e50a546ca0e9bb6e2b0718 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 28 Jul 2016 20:26:37 +0200 Subject: s390/cio: stop using subchannel_id from ccw_device_private We want to get rid of the copy of struct subchannel_id maintained in ccw_device_private, so obtain it from the subchannel directly. Signed-off-by: Sebastian Ott Reviewed-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device_status.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/s390/cio/device_status.c b/drivers/s390/cio/device_status.c index 15b56a15db15..9bc3512374c9 100644 --- a/drivers/s390/cio/device_status.c +++ b/drivers/s390/cio/device_status.c @@ -26,6 +26,7 @@ static void ccw_device_msg_control_check(struct ccw_device *cdev, struct irb *irb) { + struct subchannel *sch = to_subchannel(cdev->dev.parent); char dbf_text[15]; if (!scsw_is_valid_cstat(&irb->scsw) || @@ -36,10 +37,10 @@ ccw_device_msg_control_check(struct ccw_device *cdev, struct irb *irb) "received" " ... device %04x on subchannel 0.%x.%04x, dev_stat " ": %02X sch_stat : %02X\n", - cdev->private->dev_id.devno, cdev->private->schid.ssid, - cdev->private->schid.sch_no, + cdev->private->dev_id.devno, sch->schid.ssid, + sch->schid.sch_no, scsw_dstat(&irb->scsw), scsw_cstat(&irb->scsw)); - sprintf(dbf_text, "chk%x", cdev->private->schid.sch_no); + sprintf(dbf_text, "chk%x", sch->schid.sch_no); CIO_TRACE_EVENT(0, dbf_text); CIO_HEX_EVENT(0, irb, sizeof(struct irb)); } -- cgit v1.2.3 From 9080c92494f0d7e2bca1197bbddcc417117057c3 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 28 Jul 2016 20:30:31 +0200 Subject: s390/qdio: obtain subchannel_id via ccw_device_get_schid() We want to get rid of the copy of struct subchannel_id maintained in ccw_device_private, so obtain it using ccw_device_get_schid(). Signed-off-by: Sebastian Ott Reviewed-by: Cornelia Huck Reviewed-by: Ursula Braun Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/qdio_main.c | 32 +++++++++++++++++++++++--------- 1 file changed, 23 insertions(+), 9 deletions(-) diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index 4bb5262f7aee..94e96207d42d 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -1066,10 +1066,12 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, struct irb *irb) { struct qdio_irq *irq_ptr = cdev->private->qdio_data; + struct subchannel_id schid; int cstat, dstat; if (!intparm || !irq_ptr) { - DBF_ERROR("qint:%4x", cdev->private->schid.sch_no); + ccw_device_get_schid(cdev, &schid); + DBF_ERROR("qint:%4x", schid.sch_no); return; } @@ -1122,12 +1124,14 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, int qdio_get_ssqd_desc(struct ccw_device *cdev, struct qdio_ssqd_desc *data) { + struct subchannel_id schid; if (!cdev || !cdev->private) return -EINVAL; - DBF_EVENT("get ssqd:%4x", cdev->private->schid.sch_no); - return qdio_setup_get_ssqd(NULL, &cdev->private->schid, data); + ccw_device_get_schid(cdev, &schid); + DBF_EVENT("get ssqd:%4x", schid.sch_no); + return qdio_setup_get_ssqd(NULL, &schid, data); } EXPORT_SYMBOL_GPL(qdio_get_ssqd_desc); @@ -1154,6 +1158,7 @@ static void qdio_shutdown_queues(struct ccw_device *cdev) int qdio_shutdown(struct ccw_device *cdev, int how) { struct qdio_irq *irq_ptr = cdev->private->qdio_data; + struct subchannel_id schid; int rc; unsigned long flags; @@ -1161,7 +1166,8 @@ int qdio_shutdown(struct ccw_device *cdev, int how) return -ENODEV; WARN_ON_ONCE(irqs_disabled()); - DBF_EVENT("qshutdown:%4x", cdev->private->schid.sch_no); + ccw_device_get_schid(cdev, &schid); + DBF_EVENT("qshutdown:%4x", schid.sch_no); mutex_lock(&irq_ptr->setup_mutex); /* @@ -1228,11 +1234,13 @@ EXPORT_SYMBOL_GPL(qdio_shutdown); int qdio_free(struct ccw_device *cdev) { struct qdio_irq *irq_ptr = cdev->private->qdio_data; + struct subchannel_id schid; if (!irq_ptr) return -ENODEV; - DBF_EVENT("qfree:%4x", cdev->private->schid.sch_no); + ccw_device_get_schid(cdev, &schid); + DBF_EVENT("qfree:%4x", schid.sch_no); DBF_DEV_EVENT(DBF_ERR, irq_ptr, "dbf abandoned"); mutex_lock(&irq_ptr->setup_mutex); @@ -1251,9 +1259,11 @@ EXPORT_SYMBOL_GPL(qdio_free); */ int qdio_allocate(struct qdio_initialize *init_data) { + struct subchannel_id schid; struct qdio_irq *irq_ptr; - DBF_EVENT("qallocate:%4x", init_data->cdev->private->schid.sch_no); + ccw_device_get_schid(init_data->cdev, &schid); + DBF_EVENT("qallocate:%4x", schid.sch_no); if ((init_data->no_input_qs && !init_data->input_handler) || (init_data->no_output_qs && !init_data->output_handler)) @@ -1331,12 +1341,14 @@ static void qdio_detect_hsicq(struct qdio_irq *irq_ptr) */ int qdio_establish(struct qdio_initialize *init_data) { - struct qdio_irq *irq_ptr; struct ccw_device *cdev = init_data->cdev; + struct subchannel_id schid; + struct qdio_irq *irq_ptr; unsigned long saveflags; int rc; - DBF_EVENT("qestablish:%4x", cdev->private->schid.sch_no); + ccw_device_get_schid(cdev, &schid); + DBF_EVENT("qestablish:%4x", schid.sch_no); irq_ptr = cdev->private->qdio_data; if (!irq_ptr) @@ -1407,11 +1419,13 @@ EXPORT_SYMBOL_GPL(qdio_establish); */ int qdio_activate(struct ccw_device *cdev) { + struct subchannel_id schid; struct qdio_irq *irq_ptr; int rc; unsigned long saveflags; - DBF_EVENT("qactivate:%4x", cdev->private->schid.sch_no); + ccw_device_get_schid(cdev, &schid); + DBF_EVENT("qactivate:%4x", schid.sch_no); irq_ptr = cdev->private->qdio_data; if (!irq_ptr) -- cgit v1.2.3 From 1ab50a99f8cc6f4d761421d55a4044ad7f185cb5 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Fri, 29 Jul 2016 10:43:53 +0200 Subject: s390/cio: remove subchannel_id from ccw_device_private A copy of struct subchannel_id is maintained in ccw_device_private. The subchannel id is a property of the subchannel. The additional copy is not needed. Internal users can obtain it from subchannel.schid - device drivers can use ccw_device_get_schid(). Signed-off-by: Sebastian Ott Reviewed-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device.c | 2 -- drivers/s390/cio/io_sch.h | 1 - 2 files changed, 3 deletions(-) diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 7ada078ffdd0..6a58bc8f46e2 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -762,7 +762,6 @@ static int io_subchannel_initialize_dev(struct subchannel *sch, priv->state = DEV_STATE_NOT_OPER; priv->dev_id.devno = sch->schib.pmcw.dev; priv->dev_id.ssid = sch->schid.ssid; - priv->schid = sch->schid; INIT_WORK(&priv->todo_work, ccw_device_todo); INIT_LIST_HEAD(&priv->cmb_list); @@ -1000,7 +999,6 @@ static int ccw_device_move_to_sch(struct ccw_device *cdev, put_device(&old_sch->dev); /* Initialize new subchannel. */ spin_lock_irq(sch->lock); - cdev->private->schid = sch->schid; cdev->ccwlock = sch->lock; if (!sch_is_pseudo_sch(sch)) sch_set_cdev(sch, cdev); diff --git a/drivers/s390/cio/io_sch.h b/drivers/s390/cio/io_sch.h index 8975060af96c..220f49145b2f 100644 --- a/drivers/s390/cio/io_sch.h +++ b/drivers/s390/cio/io_sch.h @@ -120,7 +120,6 @@ struct ccw_device_private { int state; /* device state */ atomic_t onoff; struct ccw_dev_id dev_id; /* device id */ - struct subchannel_id schid; /* subchannel number */ struct ccw_request req; /* internal I/O request */ int iretry; u8 pgid_valid_mask; /* mask of valid PGIDs */ -- cgit v1.2.3 From a48ed867153c6d2f6d058267213a82dbd8b6737a Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Fri, 29 Jul 2016 13:41:20 +0200 Subject: s390/qdio: get rid of spin_lock_irqsave usage All qdio functions that use spin_lock_irqsave are never used from irq context. Thus it is safe to convert all of them to use spin_lock_irq. Signed-off-by: Sebastian Ott Reviewed-by: Ursula Braun Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/qdio_main.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index 94e96207d42d..b200f27489a7 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -1160,7 +1160,6 @@ int qdio_shutdown(struct ccw_device *cdev, int how) struct qdio_irq *irq_ptr = cdev->private->qdio_data; struct subchannel_id schid; int rc; - unsigned long flags; if (!irq_ptr) return -ENODEV; @@ -1190,7 +1189,7 @@ int qdio_shutdown(struct ccw_device *cdev, int how) qdio_shutdown_debug_entries(irq_ptr); /* cleanup subchannel */ - spin_lock_irqsave(get_ccwdev_lock(cdev), flags); + spin_lock_irq(get_ccwdev_lock(cdev)); if (how & QDIO_FLAG_CLEANUP_USING_CLEAR) rc = ccw_device_clear(cdev, QDIO_DOING_CLEANUP); @@ -1204,12 +1203,12 @@ int qdio_shutdown(struct ccw_device *cdev, int how) } qdio_set_state(irq_ptr, QDIO_IRQ_STATE_CLEANUP); - spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags); + spin_unlock_irq(get_ccwdev_lock(cdev)); wait_event_interruptible_timeout(cdev->private->wait_q, irq_ptr->state == QDIO_IRQ_STATE_INACTIVE || irq_ptr->state == QDIO_IRQ_STATE_ERR, 10 * HZ); - spin_lock_irqsave(get_ccwdev_lock(cdev), flags); + spin_lock_irq(get_ccwdev_lock(cdev)); no_cleanup: qdio_shutdown_thinint(irq_ptr); @@ -1217,7 +1216,7 @@ no_cleanup: /* restore interrupt handler */ if ((void *)cdev->handler == (void *)qdio_int_handler) cdev->handler = irq_ptr->orig_handler; - spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags); + spin_unlock_irq(get_ccwdev_lock(cdev)); qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); mutex_unlock(&irq_ptr->setup_mutex); @@ -1344,7 +1343,6 @@ int qdio_establish(struct qdio_initialize *init_data) struct ccw_device *cdev = init_data->cdev; struct subchannel_id schid; struct qdio_irq *irq_ptr; - unsigned long saveflags; int rc; ccw_device_get_schid(cdev, &schid); @@ -1373,7 +1371,7 @@ int qdio_establish(struct qdio_initialize *init_data) irq_ptr->ccw.count = irq_ptr->equeue.count; irq_ptr->ccw.cda = (u32)((addr_t)irq_ptr->qdr); - spin_lock_irqsave(get_ccwdev_lock(cdev), saveflags); + spin_lock_irq(get_ccwdev_lock(cdev)); ccw_device_set_options_mask(cdev, 0); rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ESTABLISH, 0, 0); @@ -1381,7 +1379,7 @@ int qdio_establish(struct qdio_initialize *init_data) DBF_ERROR("%4x est IO ERR", irq_ptr->schid.sch_no); DBF_ERROR("rc:%4x", rc); } - spin_unlock_irqrestore(get_ccwdev_lock(cdev), saveflags); + spin_unlock_irq(get_ccwdev_lock(cdev)); if (rc) { mutex_unlock(&irq_ptr->setup_mutex); @@ -1422,7 +1420,6 @@ int qdio_activate(struct ccw_device *cdev) struct subchannel_id schid; struct qdio_irq *irq_ptr; int rc; - unsigned long saveflags; ccw_device_get_schid(cdev, &schid); DBF_EVENT("qactivate:%4x", schid.sch_no); @@ -1445,7 +1442,7 @@ int qdio_activate(struct ccw_device *cdev) irq_ptr->ccw.count = irq_ptr->aqueue.count; irq_ptr->ccw.cda = 0; - spin_lock_irqsave(get_ccwdev_lock(cdev), saveflags); + spin_lock_irq(get_ccwdev_lock(cdev)); ccw_device_set_options(cdev, CCWDEV_REPORT_ALL); rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ACTIVATE, @@ -1454,7 +1451,7 @@ int qdio_activate(struct ccw_device *cdev) DBF_ERROR("%4x act IO ERR", irq_ptr->schid.sch_no); DBF_ERROR("rc:%4x", rc); } - spin_unlock_irqrestore(get_ccwdev_lock(cdev), saveflags); + spin_unlock_irq(get_ccwdev_lock(cdev)); if (rc) goto out; -- cgit v1.2.3 From ddebf6612c5dcc479725867b9fd9a4d98f41350f Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Fri, 29 Jul 2016 14:00:27 +0200 Subject: s390/qdio: fix double return code evaluation qdio sometimes checks return codes twice. First with the ccw device's lock held and then a 2nd time after the lock is released. Simplify the code by releasing the lock earlier and unify the return code evaluation. Signed-off-by: Sebastian Ott Reviewed-by: Ursula Braun Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/qdio_main.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index b200f27489a7..da969789936d 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -1375,13 +1375,10 @@ int qdio_establish(struct qdio_initialize *init_data) ccw_device_set_options_mask(cdev, 0); rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ESTABLISH, 0, 0); + spin_unlock_irq(get_ccwdev_lock(cdev)); if (rc) { DBF_ERROR("%4x est IO ERR", irq_ptr->schid.sch_no); DBF_ERROR("rc:%4x", rc); - } - spin_unlock_irq(get_ccwdev_lock(cdev)); - - if (rc) { mutex_unlock(&irq_ptr->setup_mutex); qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); return rc; @@ -1447,14 +1444,12 @@ int qdio_activate(struct ccw_device *cdev) rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ACTIVATE, 0, DOIO_DENY_PREFETCH); + spin_unlock_irq(get_ccwdev_lock(cdev)); if (rc) { DBF_ERROR("%4x act IO ERR", irq_ptr->schid.sch_no); DBF_ERROR("rc:%4x", rc); - } - spin_unlock_irq(get_ccwdev_lock(cdev)); - - if (rc) goto out; + } if (is_thinint_irq(irq_ptr)) tiqdio_add_input_queues(irq_ptr); -- cgit v1.2.3 From 6e30c549f6cab7a41d0934cea80822a2211132ae Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Tue, 2 Aug 2016 16:01:39 +0200 Subject: s390/qdio: remove checks for ccw device internal state Prior to starting IO qdio checks for the internal state of the ccw device. These checks happen without locking, so consistency between state evaluation and starting of the IO is not guaranteed. Since the internal state is checked during ccw_device_start it is safe to get rid of these additional checks. Signed-off-by: Sebastian Ott Reviewed-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/qdio_main.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index da969789936d..fda3b2617ec9 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -1352,9 +1352,6 @@ int qdio_establish(struct qdio_initialize *init_data) if (!irq_ptr) return -ENODEV; - if (cdev->private->state != DEV_STATE_ONLINE) - return -EINVAL; - mutex_lock(&irq_ptr->setup_mutex); qdio_setup_irq(init_data); @@ -1425,9 +1422,6 @@ int qdio_activate(struct ccw_device *cdev) if (!irq_ptr) return -ENODEV; - if (cdev->private->state != DEV_STATE_ONLINE) - return -EINVAL; - mutex_lock(&irq_ptr->setup_mutex); if (irq_ptr->state == QDIO_IRQ_STATE_INACTIVE) { rc = -EBUSY; -- cgit v1.2.3 From 9bce8b2cbebf9f11b41021ccb98c6b18d1796edd Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Fri, 5 Aug 2016 12:33:10 +0200 Subject: s390/qdio: avoid reschedule of outbound tasklet once killed During qdio_shutdown the queue tasklets are killed for all inbound and outbound queues. The queue structures might be freed after qdio_shutdown. Thus it must be guaranteed that these queue tasklets are not rescheduled after that. In addition the outbound queue timers are deleted and it must be guaranteed that these timers are not restarted after qdio_shutdown processing. Timer deletion should make use of del_timer_sync() to make sure qdio_outbound_timer() is finished on other CPUs as well. Queue tasklets should be scheduled in state QDIO_IRQ_STATE_ACTIVE only. Signed-off-by: Ursula Braun Reviewed-by: Benjamin Block Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/qdio_main.c | 49 ++++++++++++++++++++++---------------------- 1 file changed, 25 insertions(+), 24 deletions(-) diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index fda3b2617ec9..71bf9bded485 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -686,6 +686,15 @@ static void qdio_kick_handler(struct qdio_q *q) q->qdio_error = 0; } +static inline int qdio_tasklet_schedule(struct qdio_q *q) +{ + if (likely(q->irq_ptr->state == QDIO_IRQ_STATE_ACTIVE)) { + tasklet_schedule(&q->tasklet); + return 0; + } + return -EPERM; +} + static void __qdio_inbound_processing(struct qdio_q *q) { qperf_inc(q, tasklet_inbound); @@ -698,10 +707,8 @@ static void __qdio_inbound_processing(struct qdio_q *q) if (!qdio_inbound_q_done(q)) { /* means poll time is not yet over */ qperf_inc(q, tasklet_inbound_resched); - if (likely(q->irq_ptr->state != QDIO_IRQ_STATE_STOPPED)) { - tasklet_schedule(&q->tasklet); + if (!qdio_tasklet_schedule(q)) return; - } } qdio_stop_polling(q); @@ -711,8 +718,7 @@ static void __qdio_inbound_processing(struct qdio_q *q) */ if (!qdio_inbound_q_done(q)) { qperf_inc(q, tasklet_inbound_resched2); - if (likely(q->irq_ptr->state != QDIO_IRQ_STATE_STOPPED)) - tasklet_schedule(&q->tasklet); + qdio_tasklet_schedule(q); } } @@ -869,16 +875,15 @@ static void __qdio_outbound_processing(struct qdio_q *q) * is noticed and outbound_handler is called after some time. */ if (qdio_outbound_q_done(q)) - del_timer(&q->u.out.timer); + del_timer_sync(&q->u.out.timer); else - if (!timer_pending(&q->u.out.timer)) + if (!timer_pending(&q->u.out.timer) && + likely(q->irq_ptr->state == QDIO_IRQ_STATE_ACTIVE)) mod_timer(&q->u.out.timer, jiffies + 10 * HZ); return; sched: - if (unlikely(q->irq_ptr->state == QDIO_IRQ_STATE_STOPPED)) - return; - tasklet_schedule(&q->tasklet); + qdio_tasklet_schedule(q); } /* outbound tasklet */ @@ -892,9 +897,7 @@ void qdio_outbound_timer(unsigned long data) { struct qdio_q *q = (struct qdio_q *)data; - if (unlikely(q->irq_ptr->state == QDIO_IRQ_STATE_STOPPED)) - return; - tasklet_schedule(&q->tasklet); + qdio_tasklet_schedule(q); } static inline void qdio_check_outbound_after_thinint(struct qdio_q *q) @@ -907,7 +910,7 @@ static inline void qdio_check_outbound_after_thinint(struct qdio_q *q) for_each_output_queue(q->irq_ptr, out, i) if (!qdio_outbound_q_done(out)) - tasklet_schedule(&out->tasklet); + qdio_tasklet_schedule(out); } static void __tiqdio_inbound_processing(struct qdio_q *q) @@ -929,10 +932,8 @@ static void __tiqdio_inbound_processing(struct qdio_q *q) if (!qdio_inbound_q_done(q)) { qperf_inc(q, tasklet_inbound_resched); - if (likely(q->irq_ptr->state != QDIO_IRQ_STATE_STOPPED)) { - tasklet_schedule(&q->tasklet); + if (!qdio_tasklet_schedule(q)) return; - } } qdio_stop_polling(q); @@ -942,8 +943,7 @@ static void __tiqdio_inbound_processing(struct qdio_q *q) */ if (!qdio_inbound_q_done(q)) { qperf_inc(q, tasklet_inbound_resched2); - if (likely(q->irq_ptr->state != QDIO_IRQ_STATE_STOPPED)) - tasklet_schedule(&q->tasklet); + qdio_tasklet_schedule(q); } } @@ -977,7 +977,7 @@ static void qdio_int_handler_pci(struct qdio_irq *irq_ptr) int i; struct qdio_q *q; - if (unlikely(irq_ptr->state == QDIO_IRQ_STATE_STOPPED)) + if (unlikely(irq_ptr->state != QDIO_IRQ_STATE_ACTIVE)) return; for_each_input_queue(irq_ptr, q, i) { @@ -1003,7 +1003,7 @@ static void qdio_int_handler_pci(struct qdio_irq *irq_ptr) continue; if (need_siga_sync(q) && need_siga_sync_out_after_pci(q)) qdio_siga_sync_q(q); - tasklet_schedule(&q->tasklet); + qdio_tasklet_schedule(q); } } @@ -1145,7 +1145,7 @@ static void qdio_shutdown_queues(struct ccw_device *cdev) tasklet_kill(&q->tasklet); for_each_output_queue(irq_ptr, q, i) { - del_timer(&q->u.out.timer); + del_timer_sync(&q->u.out.timer); tasklet_kill(&q->tasklet); } } @@ -1585,10 +1585,11 @@ static int handle_outbound(struct qdio_q *q, unsigned int callflags, /* in case of SIGA errors we must process the error immediately */ if (used >= q->u.out.scan_threshold || rc) - tasklet_schedule(&q->tasklet); + qdio_tasklet_schedule(q); else /* free the SBALs in case of no further traffic */ - if (!timer_pending(&q->u.out.timer)) + if (!timer_pending(&q->u.out.timer) && + likely(q->irq_ptr->state == QDIO_IRQ_STATE_ACTIVE)) mod_timer(&q->u.out.timer, jiffies + HZ); return rc; } -- cgit v1.2.3 From f743e70e8f8f3200dde1dcf50c14aa2900d65071 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 3 Aug 2016 19:37:03 +0200 Subject: crypto: sha3 - Add missing ULL suffixes for 64-bit constants MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On 32-bit (e.g. with m68k-linux-gnu-gcc-4.1): crypto/sha3_generic.c:27: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:28: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:29: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:29: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:31: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:31: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:32: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:32: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:32: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:33: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:33: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:34: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:34: warning: integer constant is too large for ‘long’ type Fixes: 53964b9ee63b7075 ("crypto: sha3 - Add SHA-3 hash algorithm") Signed-off-by: Geert Uytterhoeven Signed-off-by: Herbert Xu --- crypto/sha3_generic.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/crypto/sha3_generic.c b/crypto/sha3_generic.c index 62264397a2d2..7e8ed96236ce 100644 --- a/crypto/sha3_generic.c +++ b/crypto/sha3_generic.c @@ -24,14 +24,14 @@ #define ROTL64(x, y) (((x) << (y)) | ((x) >> (64 - (y)))) static const u64 keccakf_rndc[24] = { - 0x0000000000000001, 0x0000000000008082, 0x800000000000808a, - 0x8000000080008000, 0x000000000000808b, 0x0000000080000001, - 0x8000000080008081, 0x8000000000008009, 0x000000000000008a, - 0x0000000000000088, 0x0000000080008009, 0x000000008000000a, - 0x000000008000808b, 0x800000000000008b, 0x8000000000008089, - 0x8000000000008003, 0x8000000000008002, 0x8000000000000080, - 0x000000000000800a, 0x800000008000000a, 0x8000000080008081, - 0x8000000000008080, 0x0000000080000001, 0x8000000080008008 + 0x0000000000000001ULL, 0x0000000000008082ULL, 0x800000000000808aULL, + 0x8000000080008000ULL, 0x000000000000808bULL, 0x0000000080000001ULL, + 0x8000000080008081ULL, 0x8000000000008009ULL, 0x000000000000008aULL, + 0x0000000000000088ULL, 0x0000000080008009ULL, 0x000000008000000aULL, + 0x000000008000808bULL, 0x800000000000008bULL, 0x8000000000008089ULL, + 0x8000000000008003ULL, 0x8000000000008002ULL, 0x8000000000000080ULL, + 0x000000000000800aULL, 0x800000008000000aULL, 0x8000000080008081ULL, + 0x8000000000008080ULL, 0x0000000080000001ULL, 0x8000000080008008ULL }; static const int keccakf_rotc[24] = { -- cgit v1.2.3 From 1d2d87e81ea21f64c19b95ef228b865a6880e17e Mon Sep 17 00:00:00 2001 From: Horia Geantă Date: Thu, 4 Aug 2016 20:02:46 +0300 Subject: crypto: caam - fix echainiv(authenc) encrypt shared descriptor MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are a few things missed by the conversion to the new AEAD interface: 1 - echainiv(authenc) encrypt shared descriptor The shared descriptor is incorrect: due to the order of operations, at some point in time MATH3 register is being overwritten. 2 - buffer used for echainiv(authenc) encrypt shared descriptor Encrypt and givencrypt shared descriptors (for AEAD ops) are mutually exclusive and thus use the same buffer in context state: sh_desc_enc. However, there's one place missed by s/sh_desc_givenc/sh_desc_enc, leading to errors when echainiv(authenc(...)) algorithms are used: DECO: desc idx 14: Header Error. Invalid length or parity, or certain other problems. While here, also fix a typo: dma_mapping_error() is checking for validity of sh_desc_givenc_dma instead of sh_desc_enc_dma. Cc: # 4.3+ Fixes: 479bcc7c5b9e ("crypto: caam - Convert authenc to new AEAD interface") Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu --- drivers/crypto/caam/caamalg.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c index ea8189f4b021..e356005a7212 100644 --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c @@ -614,7 +614,7 @@ skip_enc: keys_fit_inline = true; /* aead_givencrypt shared descriptor */ - desc = ctx->sh_desc_givenc; + desc = ctx->sh_desc_enc; /* Note: Context registers are saved. */ init_sh_desc_key_aead(desc, ctx, keys_fit_inline, is_rfc3686); @@ -645,13 +645,13 @@ copy_iv: append_operation(desc, ctx->class2_alg_type | OP_ALG_AS_INITFINAL | OP_ALG_ENCRYPT); - /* ivsize + cryptlen = seqoutlen - authsize */ - append_math_sub_imm_u32(desc, REG3, SEQOUTLEN, IMM, ctx->authsize); - /* Read and write assoclen bytes */ append_math_add(desc, VARSEQINLEN, ZERO, REG3, CAAM_CMD_SZ); append_math_add(desc, VARSEQOUTLEN, ZERO, REG3, CAAM_CMD_SZ); + /* ivsize + cryptlen = seqoutlen - authsize */ + append_math_sub_imm_u32(desc, REG3, SEQOUTLEN, IMM, ctx->authsize); + /* Skip assoc data */ append_seq_fifo_store(desc, 0, FIFOST_TYPE_SKIP | FIFOLDST_VLF); @@ -697,7 +697,7 @@ copy_iv: ctx->sh_desc_enc_dma = dma_map_single(jrdev, desc, desc_bytes(desc), DMA_TO_DEVICE); - if (dma_mapping_error(jrdev, ctx->sh_desc_givenc_dma)) { + if (dma_mapping_error(jrdev, ctx->sh_desc_enc_dma)) { dev_err(jrdev, "unable to map shared descriptor\n"); return -ENOMEM; } -- cgit v1.2.3 From 2fdea258fde036a87d3396ec9c0ef66f10768530 Mon Sep 17 00:00:00 2001 From: Horia Geantă Date: Thu, 4 Aug 2016 20:02:47 +0300 Subject: crypto: caam - defer aead_set_sh_desc in case of zero authsize MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To be able to generate shared descriptors for AEAD, the authentication size needs to be known. However, there is no imposed order of calling .setkey, .setauthsize callbacks. Thus, in case authentication size is not known at .setkey time, defer it until .setauthsize is called. The authsize != 0 check was incorrectly removed when converting the driver to the new AEAD interface. Cc: # 4.3+ Fixes: 479bcc7c5b9e ("crypto: caam - Convert authenc to new AEAD interface") Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu --- drivers/crypto/caam/caamalg.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c index e356005a7212..6dc597126b79 100644 --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c @@ -441,6 +441,9 @@ static int aead_set_sh_desc(struct crypto_aead *aead) OP_ALG_AAI_CTR_MOD128); const bool is_rfc3686 = alg->caam.rfc3686; + if (!ctx->authsize) + return 0; + /* NULL encryption / decryption */ if (!ctx->enckeylen) return aead_null_set_sh_desc(aead); -- cgit v1.2.3 From dca3f53c02e325bb19dfc05b1571b9a706226fea Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Thu, 4 Aug 2016 12:11:55 +0200 Subject: sctp: Export struct sctp_info to userspace This is required to correctly interpret INET_DIAG_INFO messages exported by sctp_diag module. Signed-off-by: Phil Sutter Signed-off-by: David S. Miller --- include/linux/sctp.h | 64 ----------------------------------------------- include/uapi/linux/sctp.h | 64 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 64 insertions(+), 64 deletions(-) diff --git a/include/linux/sctp.h b/include/linux/sctp.h index de1f64318fc4..fcb4c3646173 100644 --- a/include/linux/sctp.h +++ b/include/linux/sctp.h @@ -705,70 +705,6 @@ typedef struct sctp_auth_chunk { sctp_authhdr_t auth_hdr; } __packed sctp_auth_chunk_t; -struct sctp_info { - __u32 sctpi_tag; - __u32 sctpi_state; - __u32 sctpi_rwnd; - __u16 sctpi_unackdata; - __u16 sctpi_penddata; - __u16 sctpi_instrms; - __u16 sctpi_outstrms; - __u32 sctpi_fragmentation_point; - __u32 sctpi_inqueue; - __u32 sctpi_outqueue; - __u32 sctpi_overall_error; - __u32 sctpi_max_burst; - __u32 sctpi_maxseg; - __u32 sctpi_peer_rwnd; - __u32 sctpi_peer_tag; - __u8 sctpi_peer_capable; - __u8 sctpi_peer_sack; - __u16 __reserved1; - - /* assoc status info */ - __u64 sctpi_isacks; - __u64 sctpi_osacks; - __u64 sctpi_opackets; - __u64 sctpi_ipackets; - __u64 sctpi_rtxchunks; - __u64 sctpi_outofseqtsns; - __u64 sctpi_idupchunks; - __u64 sctpi_gapcnt; - __u64 sctpi_ouodchunks; - __u64 sctpi_iuodchunks; - __u64 sctpi_oodchunks; - __u64 sctpi_iodchunks; - __u64 sctpi_octrlchunks; - __u64 sctpi_ictrlchunks; - - /* primary transport info */ - struct sockaddr_storage sctpi_p_address; - __s32 sctpi_p_state; - __u32 sctpi_p_cwnd; - __u32 sctpi_p_srtt; - __u32 sctpi_p_rto; - __u32 sctpi_p_hbinterval; - __u32 sctpi_p_pathmaxrxt; - __u32 sctpi_p_sackdelay; - __u32 sctpi_p_sackfreq; - __u32 sctpi_p_ssthresh; - __u32 sctpi_p_partial_bytes_acked; - __u32 sctpi_p_flight_size; - __u16 sctpi_p_error; - __u16 __reserved2; - - /* sctp sock info */ - __u32 sctpi_s_autoclose; - __u32 sctpi_s_adaptation_ind; - __u32 sctpi_s_pd_point; - __u8 sctpi_s_nodelay; - __u8 sctpi_s_disable_fragments; - __u8 sctpi_s_v4mapped; - __u8 sctpi_s_frag_interleave; - __u32 sctpi_s_type; - __u32 __reserved3; -}; - struct sctp_infox { struct sctp_info *sctpinfo; struct sctp_association *asoc; diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h index d304f4c9792c..a406adcc0793 100644 --- a/include/uapi/linux/sctp.h +++ b/include/uapi/linux/sctp.h @@ -944,4 +944,68 @@ struct sctp_default_prinfo { __u16 pr_policy; }; +struct sctp_info { + __u32 sctpi_tag; + __u32 sctpi_state; + __u32 sctpi_rwnd; + __u16 sctpi_unackdata; + __u16 sctpi_penddata; + __u16 sctpi_instrms; + __u16 sctpi_outstrms; + __u32 sctpi_fragmentation_point; + __u32 sctpi_inqueue; + __u32 sctpi_outqueue; + __u32 sctpi_overall_error; + __u32 sctpi_max_burst; + __u32 sctpi_maxseg; + __u32 sctpi_peer_rwnd; + __u32 sctpi_peer_tag; + __u8 sctpi_peer_capable; + __u8 sctpi_peer_sack; + __u16 __reserved1; + + /* assoc status info */ + __u64 sctpi_isacks; + __u64 sctpi_osacks; + __u64 sctpi_opackets; + __u64 sctpi_ipackets; + __u64 sctpi_rtxchunks; + __u64 sctpi_outofseqtsns; + __u64 sctpi_idupchunks; + __u64 sctpi_gapcnt; + __u64 sctpi_ouodchunks; + __u64 sctpi_iuodchunks; + __u64 sctpi_oodchunks; + __u64 sctpi_iodchunks; + __u64 sctpi_octrlchunks; + __u64 sctpi_ictrlchunks; + + /* primary transport info */ + struct sockaddr_storage sctpi_p_address; + __s32 sctpi_p_state; + __u32 sctpi_p_cwnd; + __u32 sctpi_p_srtt; + __u32 sctpi_p_rto; + __u32 sctpi_p_hbinterval; + __u32 sctpi_p_pathmaxrxt; + __u32 sctpi_p_sackdelay; + __u32 sctpi_p_sackfreq; + __u32 sctpi_p_ssthresh; + __u32 sctpi_p_partial_bytes_acked; + __u32 sctpi_p_flight_size; + __u16 sctpi_p_error; + __u16 __reserved2; + + /* sctp sock info */ + __u32 sctpi_s_autoclose; + __u32 sctpi_s_adaptation_ind; + __u32 sctpi_s_pd_point; + __u8 sctpi_s_nodelay; + __u8 sctpi_s_disable_fragments; + __u8 sctpi_s_v4mapped; + __u8 sctpi_s_frag_interleave; + __u32 sctpi_s_type; + __u32 __reserved3; +}; + #endif /* _UAPI_SCTP_H */ -- cgit v1.2.3 From 12474e8e58d82e2b815cd35956c0c06fab104ee7 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Thu, 4 Aug 2016 12:11:56 +0200 Subject: sctp_diag: Fix T3_rtx timer export The asoc's timer value is not kept in asoc->timeouts array but in it's primary transport instead. Furthermore, we must export the timer only if it is pending, otherwise the value will underrun when stored in an unsigned variable and user space will only see a very large timeout value. Signed-off-by: Phil Sutter Signed-off-by: David S. Miller --- net/sctp/sctp_diag.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/net/sctp/sctp_diag.c b/net/sctp/sctp_diag.c index f69edcf219e5..f728ef04a7b2 100644 --- a/net/sctp/sctp_diag.c +++ b/net/sctp/sctp_diag.c @@ -13,6 +13,7 @@ static void inet_diag_msg_sctpasoc_fill(struct inet_diag_msg *r, { union sctp_addr laddr, paddr; struct dst_entry *dst; + struct timer_list *t3_rtx = &asoc->peer.primary_path->T3_rtx_timer; laddr = list_entry(asoc->base.bind_addr.address_list.next, struct sctp_sockaddr_entry, list)->a; @@ -40,10 +41,15 @@ static void inet_diag_msg_sctpasoc_fill(struct inet_diag_msg *r, } r->idiag_state = asoc->state; - r->idiag_timer = SCTP_EVENT_TIMEOUT_T3_RTX; - r->idiag_retrans = asoc->rtx_data_chunks; - r->idiag_expires = jiffies_to_msecs( - asoc->timeouts[SCTP_EVENT_TIMEOUT_T3_RTX] - jiffies); + if (timer_pending(t3_rtx)) { + r->idiag_timer = SCTP_EVENT_TIMEOUT_T3_RTX; + r->idiag_retrans = asoc->rtx_data_chunks; + r->idiag_expires = jiffies_to_msecs(t3_rtx->expires - jiffies); + } else { + r->idiag_timer = 0; + r->idiag_retrans = 0; + r->idiag_expires = 0; + } } static int inet_diag_msg_sctpladdrs_fill(struct sk_buff *skb, -- cgit v1.2.3 From 1ba8d77f410d3b7423df39e8a10a02af272d3c42 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Thu, 4 Aug 2016 12:11:57 +0200 Subject: sctp_diag: Respect ss adding TCPF_CLOSE to idiag_states Since 'ss' always adds TCPF_CLOSE to idiag_states flags, sctp_diag can't rely upon TCPF_LISTEN flag solely being present when listening sockets are requested. Signed-off-by: Phil Sutter Signed-off-by: David S. Miller --- net/sctp/sctp_diag.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sctp/sctp_diag.c b/net/sctp/sctp_diag.c index f728ef04a7b2..bb691538adc8 100644 --- a/net/sctp/sctp_diag.c +++ b/net/sctp/sctp_diag.c @@ -356,7 +356,7 @@ static int sctp_ep_dump(struct sctp_endpoint *ep, void *p) if (cb->args[4] < cb->args[1]) goto next; - if ((r->idiag_states & ~TCPF_LISTEN) && !list_empty(&ep->asocs)) + if (!(r->idiag_states & TCPF_LISTEN) && !list_empty(&ep->asocs)) goto next; if (r->sdiag_family != AF_UNSPEC && @@ -471,7 +471,7 @@ skip: * 3 : to mark if we have dumped the ep info of the current asoc * 4 : to work as a temporary variable to traversal list */ - if (!(idiag_states & ~TCPF_LISTEN)) + if (!(idiag_states & ~(TCPF_LISTEN | TCPF_CLOSE))) goto done; sctp_for_each_transport(sctp_tsp_dump, net, cb->args[2], &commp); done: -- cgit v1.2.3 From 3b3bf80b994f0c6c35a25ef8965ab956b4bcced5 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Thu, 4 Aug 2016 12:37:17 +0200 Subject: rhashtable-test: Fix max_size parameter description Looks like a simple copy'n'paste error. Fixes: 1aa661f5c3df1 ("rhashtable-test: Measure time to insert, remove & traverse entries") Signed-off-by: Phil Sutter Signed-off-by: David S. Miller --- lib/test_rhashtable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/test_rhashtable.c b/lib/test_rhashtable.c index 297fdb5e74bd..64e899b63337 100644 --- a/lib/test_rhashtable.c +++ b/lib/test_rhashtable.c @@ -38,7 +38,7 @@ MODULE_PARM_DESC(runs, "Number of test runs per variant (default: 4)"); static int max_size = 0; module_param(max_size, int, 0); -MODULE_PARM_DESC(runs, "Maximum table size (default: calculated)"); +MODULE_PARM_DESC(max_size, "Maximum table size (default: calculated)"); static bool shrinking = false; module_param(shrinking, bool, 0); -- cgit v1.2.3 From b489a2000f19e414710d2887fe3e24e903242766 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Thu, 4 Aug 2016 17:36:20 +0300 Subject: mlxsw: spectrum: Do not assume PAUSE frames are disabled When ieee_setpfc() gets called, PAUSE frames are not necessarily disabled on the port. Check if PAUSE frames are disabled or enabled and configure the port's headroom buffer accordingly. Fixes: d81a6bdb87ce ("mlxsw: spectrum: Add IEEE 802.1Qbb PFC support") Signed-off-by: Ido Schimmel Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c index 01cfb7512827..3c4a178730ae 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c @@ -351,17 +351,17 @@ static int mlxsw_sp_dcbnl_ieee_setpfc(struct net_device *dev, struct ieee_pfc *pfc) { struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(dev); + bool pause_en = mlxsw_sp_port_is_pause_en(mlxsw_sp_port); int err; - if ((mlxsw_sp_port->link.tx_pause || mlxsw_sp_port->link.rx_pause) && - pfc->pfc_en) { + if (pause_en && pfc->pfc_en) { netdev_err(dev, "PAUSE frames already enabled on port\n"); return -EINVAL; } err = __mlxsw_sp_port_headroom_set(mlxsw_sp_port, dev->mtu, mlxsw_sp_port->dcb.ets->prio_tc, - false, pfc); + pause_en, pfc); if (err) { netdev_err(dev, "Failed to configure port's headroom for PFC\n"); return err; @@ -380,7 +380,7 @@ static int mlxsw_sp_dcbnl_ieee_setpfc(struct net_device *dev, err_port_pfc_set: __mlxsw_sp_port_headroom_set(mlxsw_sp_port, dev->mtu, - mlxsw_sp_port->dcb.ets->prio_tc, false, + mlxsw_sp_port->dcb.ets->prio_tc, pause_en, mlxsw_sp_port->dcb.pfc); return err; } -- cgit v1.2.3 From 07d50cae0661e5479d54d6e3e21cad15b1198103 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Thu, 4 Aug 2016 17:36:21 +0300 Subject: mlxsw: spectrum: Do not override PAUSE settings The PFCC register is used to configure both PAUSE and PFC frames. Therefore, when PFC frames are disabled we must make sure we don't mistakenly also disable PAUSE frames (which might be enabled). Fix this by packing the PFCC register with the current PAUSE settings. Note that this register is also accessed via ethtool ops, but there we are guaranteed to have PFC disabled. Fixes: d81a6bdb87ce ("mlxsw: spectrum: Add IEEE 802.1Qbb PFC support") Signed-off-by: Ido Schimmel Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c index 3c4a178730ae..b6ed7f7c531e 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c @@ -341,6 +341,8 @@ static int mlxsw_sp_port_pfc_set(struct mlxsw_sp_port *mlxsw_sp_port, char pfcc_pl[MLXSW_REG_PFCC_LEN]; mlxsw_reg_pfcc_pack(pfcc_pl, mlxsw_sp_port->local_port); + mlxsw_reg_pfcc_pprx_set(pfcc_pl, mlxsw_sp_port->link.rx_pause); + mlxsw_reg_pfcc_pptx_set(pfcc_pl, mlxsw_sp_port->link.tx_pause); mlxsw_reg_pfcc_prio_pack(pfcc_pl, pfc->pfc_en); return mlxsw_reg_write(mlxsw_sp_port->mlxsw_sp->core, MLXSW_REG(pfcc), -- cgit v1.2.3 From 4de34eb5743f720dc4798f0647f75c21d44aa1f8 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Thu, 4 Aug 2016 17:36:22 +0300 Subject: mlxsw: spectrum: Add missing DCB rollback in error path We correctly execute mlxsw_sp_port_dcb_fini() when port is removed, but I missed its rollback in the error path of port creation, so add it. Fixes: f00817df2b42 ("mlxsw: spectrum: Introduce support for Data Center Bridging (DCB)") Signed-off-by: Ido Schimmel Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index c3e61500819d..e1b8f62ccaed 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -2220,6 +2220,7 @@ err_port_vlan_init: err_core_port_init: unregister_netdev(dev); err_register_netdev: + mlxsw_sp_port_dcb_fini(mlxsw_sp_port); err_port_dcb_init: err_port_ets_init: err_port_buffers_init: -- cgit v1.2.3 From 66cf3504f4c528793b3d8986bab606f7cfb1c4bb Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 4 Aug 2016 16:07:58 -0400 Subject: net/ethernet: tundra: fix dump_eth_one warning in tsi108_eth The call site for this function appears as: #ifdef DEBUG data->msg_enable = DEBUG; dump_eth_one(dev); #endif ...leading to the following warning for !DEBUG builds: drivers/net/ethernet/tundra/tsi108_eth.c:169:13: warning: 'dump_eth_one' defined but not used [-Wunused-function] static void dump_eth_one(struct net_device *dev) ^ ...when using the arch/powerpc/configs/mpc7448_hpc2_defconfig Put the function definition under the same #ifdef as the call site to avoid the warning. Cc: "David S. Miller" Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller --- drivers/net/ethernet/tundra/tsi108_eth.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/tundra/tsi108_eth.c b/drivers/net/ethernet/tundra/tsi108_eth.c index 01a77145a0fa..8fd131207ee1 100644 --- a/drivers/net/ethernet/tundra/tsi108_eth.c +++ b/drivers/net/ethernet/tundra/tsi108_eth.c @@ -166,6 +166,7 @@ static struct platform_driver tsi_eth_driver = { static void tsi108_timed_checker(unsigned long dev_ptr); +#ifdef DEBUG static void dump_eth_one(struct net_device *dev) { struct tsi108_prv_data *data = netdev_priv(dev); @@ -190,6 +191,7 @@ static void dump_eth_one(struct net_device *dev) TSI_READ(TSI108_EC_RXESTAT), TSI_READ(TSI108_EC_RXERR), data->rxpending); } +#endif /* Synchronization is needed between the thread and up/down events. * Note that the PHY is accessed through the same registers for both -- cgit v1.2.3 From a2bfe6bf09a5f38df2bd0b1734f5fdee76f9366f Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 5 Aug 2016 00:11:11 +0200 Subject: bpf: also call skb_postpush_rcsum on xmit occasions Follow-up to commit f8ffad69c9f8 ("bpf: add skb_postpush_rcsum and fix dev_forward_skb occasions") to fix an issue for dev_queue_xmit() redirect locations which need CHECKSUM_COMPLETE fixups on ingress. For the same reasons as described in f8ffad69c9f8 already, we of course also need this here, since dev_queue_xmit() on a veth device will let us end up in the dev_forward_skb() helper again to cross namespaces. Latter then calls into skb_postpull_rcsum() to pull out L2 header, so that netif_rx_internal() sees CHECKSUM_COMPLETE as it is expected. That is, CHECKSUM_COMPLETE on ingress covering L2 _payload_, not L2 headers. Also here we have to address bpf_redirect() and bpf_clone_redirect(). Fixes: 3896d655f4d4 ("bpf: introduce bpf_clone_redirect() helper") Fixes: 27b29f63058d ("bpf: add bpf_redirect() helper") Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- net/core/filter.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/net/core/filter.c b/net/core/filter.c index 5708999f8a79..c46244f83a8f 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -1365,6 +1365,12 @@ static inline int bpf_try_make_writable(struct sk_buff *skb, return err; } +static inline void bpf_push_mac_rcsum(struct sk_buff *skb) +{ + if (skb_at_tc_ingress(skb)) + skb_postpush_rcsum(skb, skb_mac_header(skb), skb->mac_len); +} + static u64 bpf_skb_store_bytes(u64 r1, u64 r2, u64 r3, u64 r4, u64 flags) { struct bpf_scratchpad *sp = this_cpu_ptr(&bpf_sp); @@ -1607,9 +1613,6 @@ static const struct bpf_func_proto bpf_csum_diff_proto = { static inline int __bpf_rx_skb(struct net_device *dev, struct sk_buff *skb) { - if (skb_at_tc_ingress(skb)) - skb_postpush_rcsum(skb, skb_mac_header(skb), skb->mac_len); - return dev_forward_skb(dev, skb); } @@ -1648,6 +1651,8 @@ static u64 bpf_clone_redirect(u64 r1, u64 ifindex, u64 flags, u64 r4, u64 r5) if (unlikely(!skb)) return -ENOMEM; + bpf_push_mac_rcsum(skb); + return flags & BPF_F_INGRESS ? __bpf_rx_skb(dev, skb) : __bpf_tx_skb(dev, skb); } @@ -1693,6 +1698,8 @@ int skb_do_redirect(struct sk_buff *skb) return -EINVAL; } + bpf_push_mac_rcsum(skb); + return ri->flags & BPF_F_INGRESS ? __bpf_rx_skb(dev, skb) : __bpf_tx_skb(dev, skb); } -- cgit v1.2.3 From 479ffcccefd7b04442b0e949f8779b0612e8c75f Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 5 Aug 2016 00:11:12 +0200 Subject: bpf: fix checksum fixups on bpf_skb_store_bytes bpf_skb_store_bytes() invocations above L2 header need BPF_F_RECOMPUTE_CSUM flag for updates, so that CHECKSUM_COMPLETE will be fixed up along the way. Where we ran into an issue with bpf_skb_store_bytes() is when we did a single-byte update on the IPv6 hoplimit despite using BPF_F_RECOMPUTE_CSUM flag; simple ping via ICMPv6 triggered a hw csum failure as a result. The underlying issue has been tracked down to a buffer alignment issue. Meaning, that csum_partial() computations via skb_postpull_rcsum() and skb_postpush_rcsum() pair invoked had a wrong result since they operated on an odd address for the hoplimit, while other computations were done on an even address. This mix doesn't work as-is with skb_postpull_rcsum(), skb_postpush_rcsum() pair as it always expects at least half-word alignment of input buffers, which is normally the case. Thus, instead of these helpers using csum_sub() and (implicitly) csum_add(), we need to use csum_block_sub(), csum_block_add(), respectively. For unaligned offsets, they rotate the sum to align it to a half-word boundary again, otherwise they work the same as csum_sub() and csum_add(). Adding __skb_postpull_rcsum(), __skb_postpush_rcsum() variants that take the offset as an input and adapting bpf_skb_store_bytes() to them fixes the hw csum failures again. The skb_postpull_rcsum(), skb_postpush_rcsum() helpers use a 0 constant for offset so that the compiler optimizes the offset & 1 test away and generates the same code as with csum_sub()/_add(). Fixes: 608cd71a9c7c ("tc: bpf: generalize pedit action") Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- include/linux/skbuff.h | 52 ++++++++++++++++++++++++++++++++------------------ net/core/filter.c | 4 ++-- 2 files changed, 35 insertions(+), 21 deletions(-) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 6f0b3e0adc73..0f665cb26b50 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2847,6 +2847,18 @@ static inline int skb_linearize_cow(struct sk_buff *skb) __skb_linearize(skb) : 0; } +static __always_inline void +__skb_postpull_rcsum(struct sk_buff *skb, const void *start, unsigned int len, + unsigned int off) +{ + if (skb->ip_summed == CHECKSUM_COMPLETE) + skb->csum = csum_block_sub(skb->csum, + csum_partial(start, len, 0), off); + else if (skb->ip_summed == CHECKSUM_PARTIAL && + skb_checksum_start_offset(skb) < 0) + skb->ip_summed = CHECKSUM_NONE; +} + /** * skb_postpull_rcsum - update checksum for received skb after pull * @skb: buffer to update @@ -2857,36 +2869,38 @@ static inline int skb_linearize_cow(struct sk_buff *skb) * update the CHECKSUM_COMPLETE checksum, or set ip_summed to * CHECKSUM_NONE so that it can be recomputed from scratch. */ - static inline void skb_postpull_rcsum(struct sk_buff *skb, const void *start, unsigned int len) { - if (skb->ip_summed == CHECKSUM_COMPLETE) - skb->csum = csum_sub(skb->csum, csum_partial(start, len, 0)); - else if (skb->ip_summed == CHECKSUM_PARTIAL && - skb_checksum_start_offset(skb) < 0) - skb->ip_summed = CHECKSUM_NONE; + __skb_postpull_rcsum(skb, start, len, 0); } -unsigned char *skb_pull_rcsum(struct sk_buff *skb, unsigned int len); +static __always_inline void +__skb_postpush_rcsum(struct sk_buff *skb, const void *start, unsigned int len, + unsigned int off) +{ + if (skb->ip_summed == CHECKSUM_COMPLETE) + skb->csum = csum_block_add(skb->csum, + csum_partial(start, len, 0), off); +} +/** + * skb_postpush_rcsum - update checksum for received skb after push + * @skb: buffer to update + * @start: start of data after push + * @len: length of data pushed + * + * After doing a push on a received packet, you need to call this to + * update the CHECKSUM_COMPLETE checksum. + */ static inline void skb_postpush_rcsum(struct sk_buff *skb, const void *start, unsigned int len) { - /* For performing the reverse operation to skb_postpull_rcsum(), - * we can instead of ... - * - * skb->csum = csum_add(skb->csum, csum_partial(start, len, 0)); - * - * ... just use this equivalent version here to save a few - * instructions. Feeding csum of 0 in csum_partial() and later - * on adding skb->csum is equivalent to feed skb->csum in the - * first place. - */ - if (skb->ip_summed == CHECKSUM_COMPLETE) - skb->csum = csum_partial(start, len, skb->csum); + __skb_postpush_rcsum(skb, start, len, 0); } +unsigned char *skb_pull_rcsum(struct sk_buff *skb, unsigned int len); + /** * skb_push_rcsum - push skb and update receive checksum * @skb: buffer to update diff --git a/net/core/filter.c b/net/core/filter.c index c46244f83a8f..5ecd5c9836c3 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -1401,7 +1401,7 @@ static u64 bpf_skb_store_bytes(u64 r1, u64 r2, u64 r3, u64 r4, u64 flags) return -EFAULT; if (flags & BPF_F_RECOMPUTE_CSUM) - skb_postpull_rcsum(skb, ptr, len); + __skb_postpull_rcsum(skb, ptr, len, offset); memcpy(ptr, from, len); @@ -1410,7 +1410,7 @@ static u64 bpf_skb_store_bytes(u64 r1, u64 r2, u64 r3, u64 r4, u64 flags) skb_store_bits(skb, offset, ptr, len); if (flags & BPF_F_RECOMPUTE_CSUM) - skb_postpush_rcsum(skb, ptr, len); + __skb_postpush_rcsum(skb, ptr, len, offset); if (flags & BPF_F_INVALIDATE_HASH) skb_clear_hash(skb); -- cgit v1.2.3 From 8065694e6519d234ccee93d952127e3f05b81ba5 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 5 Aug 2016 00:11:13 +0200 Subject: bpf: fix checksum for vlan push/pop helper When having skbs on ingress with CHECKSUM_COMPLETE, tc BPF programs don't push rcsum of mac header back in and after BPF run back pull out again as opposed to some other subsystems (ovs, for example). For cases like q-in-q, meaning when a vlan tag for offloading is already present and we're about to push another one, then skb_vlan_push() pushes the inner one into the skb, increasing mac header and skb_postpush_rcsum()'ing the 4 bytes vlan header diff. Likewise, for the reverse operation in skb_vlan_pop() for the case where vlan header needs to be pulled out of the skb, we're decreasing the mac header and skb_postpull_rcsum()'ing the 4 bytes rcsum of the vlan header that was removed. However mangling the rcsum here will lead to hw csum failure for BPF case, since we're pulling or pushing data that was not part of the current rcsum. Changing tc BPF programs in general to push/pull rcsum around BPF_PROG_RUN() is also not really an option since current behaviour is ABI by now, but apart from that would also mean to do quite a bit of useless work in the sense that usually 12 bytes need to be rcsum pushed/pulled also when we don't need to touch this vlan related corner case. One way to fix it would be to push the necessary rcsum fixup down into vlan helpers that are (mostly) slow-path anyway. Fixes: 4e10df9a60d9 ("bpf: introduce bpf_skb_vlan_push/pop() helpers") Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- net/core/filter.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/net/core/filter.c b/net/core/filter.c index 5ecd5c9836c3..b5add4ef0d1d 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -1371,6 +1371,12 @@ static inline void bpf_push_mac_rcsum(struct sk_buff *skb) skb_postpush_rcsum(skb, skb_mac_header(skb), skb->mac_len); } +static inline void bpf_pull_mac_rcsum(struct sk_buff *skb) +{ + if (skb_at_tc_ingress(skb)) + skb_postpull_rcsum(skb, skb_mac_header(skb), skb->mac_len); +} + static u64 bpf_skb_store_bytes(u64 r1, u64 r2, u64 r3, u64 r4, u64 flags) { struct bpf_scratchpad *sp = this_cpu_ptr(&bpf_sp); @@ -1763,7 +1769,10 @@ static u64 bpf_skb_vlan_push(u64 r1, u64 r2, u64 vlan_tci, u64 r4, u64 r5) vlan_proto != htons(ETH_P_8021AD))) vlan_proto = htons(ETH_P_8021Q); + bpf_push_mac_rcsum(skb); ret = skb_vlan_push(skb, vlan_proto, vlan_tci); + bpf_pull_mac_rcsum(skb); + bpf_compute_data_end(skb); return ret; } @@ -1783,7 +1792,10 @@ static u64 bpf_skb_vlan_pop(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5) struct sk_buff *skb = (struct sk_buff *) (long) r1; int ret; + bpf_push_mac_rcsum(skb); ret = skb_vlan_pop(skb); + bpf_pull_mac_rcsum(skb); + bpf_compute_data_end(skb); return ret; } -- cgit v1.2.3 From 272d96a5ab10662691b4ec90c4a66fdbf30ea7ba Mon Sep 17 00:00:00 2001 From: pravin shelar Date: Fri, 5 Aug 2016 17:45:36 -0700 Subject: net: vxlan: lwt: Use source ip address during route lookup. LWT user can specify destination as well as source ip address for given tunnel endpoint. But vxlan is ignoring given source ip address. Following patch uses both ip address to route the tunnel packet. This consistent with other LWT implementations, like GENEVE and GRE. Fixes: ee122c79d42 ("vxlan: Flow based tunneling"). Signed-off-by: Pravin B Shelar Acked-by: Jiri Benc Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index da4e3d6632f6..b81223422cf0 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1811,7 +1811,7 @@ static struct rtable *vxlan_get_route(struct vxlan_dev *vxlan, fl4.flowi4_mark = skb->mark; fl4.flowi4_proto = IPPROTO_UDP; fl4.daddr = daddr; - fl4.saddr = vxlan->cfg.saddr.sin.sin_addr.s_addr; + fl4.saddr = *saddr; rt = ip_route_output_key(vxlan->net, &fl4); if (!IS_ERR(rt)) { @@ -1847,7 +1847,7 @@ static struct dst_entry *vxlan6_get_route(struct vxlan_dev *vxlan, memset(&fl6, 0, sizeof(fl6)); fl6.flowi6_oif = oif; fl6.daddr = *daddr; - fl6.saddr = vxlan->cfg.saddr.sin6.sin6_addr; + fl6.saddr = *saddr; fl6.flowlabel = ip6_make_flowinfo(RT_TOS(tos), label); fl6.flowi6_mark = skb->mark; fl6.flowi6_proto = IPPROTO_UDP; @@ -1920,7 +1920,8 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, struct rtable *rt = NULL; const struct iphdr *old_iph; union vxlan_addr *dst; - union vxlan_addr remote_ip; + union vxlan_addr remote_ip, local_ip; + union vxlan_addr *src; struct vxlan_metadata _md; struct vxlan_metadata *md = &_md; __be16 src_port = 0, dst_port; @@ -1938,6 +1939,7 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, dst_port = rdst->remote_port ? rdst->remote_port : vxlan->cfg.dst_port; vni = rdst->remote_vni; dst = &rdst->remote_ip; + src = &vxlan->cfg.saddr; dst_cache = &rdst->dst_cache; } else { if (!info) { @@ -1948,11 +1950,15 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, dst_port = info->key.tp_dst ? : vxlan->cfg.dst_port; vni = vxlan_tun_id_to_vni(info->key.tun_id); remote_ip.sa.sa_family = ip_tunnel_info_af(info); - if (remote_ip.sa.sa_family == AF_INET) + if (remote_ip.sa.sa_family == AF_INET) { remote_ip.sin.sin_addr.s_addr = info->key.u.ipv4.dst; - else + local_ip.sin.sin_addr.s_addr = info->key.u.ipv4.src; + } else { remote_ip.sin6.sin6_addr = info->key.u.ipv6.dst; + local_ip.sin6.sin6_addr = info->key.u.ipv6.src; + } dst = &remote_ip; + src = &local_ip; dst_cache = &info->dst_cache; } @@ -1992,15 +1998,14 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, } if (dst->sa.sa_family == AF_INET) { - __be32 saddr; - if (!vxlan->vn4_sock) goto drop; sk = vxlan->vn4_sock->sock->sk; rt = vxlan_get_route(vxlan, skb, rdst ? rdst->remote_ifindex : 0, tos, - dst->sin.sin_addr.s_addr, &saddr, + dst->sin.sin_addr.s_addr, + &src->sin.sin_addr.s_addr, dst_cache, info); if (IS_ERR(rt)) { netdev_dbg(dev, "no route to %pI4\n", @@ -2043,13 +2048,12 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, if (err < 0) goto xmit_tx_error; - udp_tunnel_xmit_skb(rt, sk, skb, saddr, + udp_tunnel_xmit_skb(rt, sk, skb, src->sin.sin_addr.s_addr, dst->sin.sin_addr.s_addr, tos, ttl, df, src_port, dst_port, xnet, !udp_sum); #if IS_ENABLED(CONFIG_IPV6) } else { struct dst_entry *ndst; - struct in6_addr saddr; u32 rt6i_flags; if (!vxlan->vn6_sock) @@ -2058,7 +2062,8 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, ndst = vxlan6_get_route(vxlan, skb, rdst ? rdst->remote_ifindex : 0, tos, - label, &dst->sin6.sin6_addr, &saddr, + label, &dst->sin6.sin6_addr, + &src->sin6.sin6_addr, dst_cache, info); if (IS_ERR(ndst)) { netdev_dbg(dev, "no route to %pI6\n", @@ -2104,7 +2109,8 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, return; } udp_tunnel6_xmit_skb(ndst, sk, skb, dev, - &saddr, &dst->sin6.sin6_addr, tos, ttl, + &src->sin6.sin6_addr, + &dst->sin6.sin6_addr, tos, ttl, label, src_port, dst_port, !udp_sum); #endif } -- cgit v1.2.3 From bbec7802c6948c8626b71a4fe31283cb4691c358 Mon Sep 17 00:00:00 2001 From: pravin shelar Date: Fri, 5 Aug 2016 17:45:37 -0700 Subject: net: vxlan: lwt: Fix vxlan local traffic. vxlan driver has bypass for local vxlan traffic, but that depends on information about all VNIs on local system in vxlan driver. This is not available in case of LWT. Therefore following patch disable encap bypass for LWT vxlan traffic. Fixes: ee122c79d42 ("vxlan: Flow based tunneling"). Reported-by: Jakub Libosvar Signed-off-by: Pravin B Shelar Acked-by: Jiri Benc Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index b81223422cf0..c0dda6fc0921 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2022,7 +2022,7 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, } /* Bypass encapsulation if the destination is local */ - if (rt->rt_flags & RTCF_LOCAL && + if (!info && rt->rt_flags & RTCF_LOCAL && !(rt->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))) { struct vxlan_dev *dst_vxlan; @@ -2082,7 +2082,7 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, /* Bypass encapsulation if the destination is local */ rt6i_flags = ((struct rt6_info *)ndst)->rt6i_flags; - if (rt6i_flags & RTF_LOCAL && + if (!info && rt6i_flags & RTF_LOCAL && !(rt6i_flags & (RTCF_BROADCAST | RTCF_MULTICAST))) { struct vxlan_dev *dst_vxlan; -- cgit v1.2.3 From 1fe323aa1b2390a0c57fb0b06a782f128d49094c Mon Sep 17 00:00:00 2001 From: Xin Long Date: Sun, 7 Aug 2016 14:15:13 +0800 Subject: sctp: use event->chunk when it's valid Commit 52253db924d1 ("sctp: also point GSO head_skb to the sk when it's available") used event->chunk->head_skb to get the head_skb in sctp_ulpevent_set_owner(). But at that moment, the event->chunk was NULL, as it cloned the skb in sctp_ulpevent_make_rcvmsg(). Therefore, that patch didn't really work. This patch is to move the event->chunk initialization before calling sctp_ulpevent_receive_data() so that it uses event->chunk when it's valid. Fixes: 52253db924d1 ("sctp: also point GSO head_skb to the sk when it's available") Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/sctp/ulpevent.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c index 1bc4f71aaba8..d85b803da11d 100644 --- a/net/sctp/ulpevent.c +++ b/net/sctp/ulpevent.c @@ -702,14 +702,14 @@ struct sctp_ulpevent *sctp_ulpevent_make_rcvmsg(struct sctp_association *asoc, */ sctp_ulpevent_init(event, 0, skb->len + sizeof(struct sk_buff)); - sctp_ulpevent_receive_data(event, asoc); - /* And hold the chunk as we need it for getting the IP headers * later in recvmsg */ sctp_chunk_hold(chunk); event->chunk = chunk; + sctp_ulpevent_receive_data(event, asoc); + event->stream = ntohs(chunk->subh.data_hdr->stream); event->ssn = ntohs(chunk->subh.data_hdr->ssn); event->ppid = chunk->subh.data_hdr->ppid; -- cgit v1.2.3 From fa00c437eef8dc2e7b25f8cd868cfa405fcc2bb3 Mon Sep 17 00:00:00 2001 From: Dave Carroll Date: Fri, 5 Aug 2016 13:44:10 -0600 Subject: aacraid: Check size values after double-fetch from user In aacraid's ioctl_send_fib() we do two fetches from userspace, one the get the fib header's size and one for the fib itself. Later we use the size field from the second fetch to further process the fib. If for some reason the size from the second fetch is different than from the first fix, we may encounter an out-of- bounds access in aac_fib_send(). We also check the sender size to insure it is not out of bounds. This was reported in https://bugzilla.kernel.org/show_bug.cgi?id=116751 and was assigned CVE-2016-6480. Reported-by: Pengfei Wang Fixes: 7c00ffa31 '[SCSI] 2.6 aacraid: Variable FIB size (updated patch)' Cc: stable@vger.kernel.org Signed-off-by: Dave Carroll Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- drivers/scsi/aacraid/commctrl.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c index b381b3718a98..5648b715fed9 100644 --- a/drivers/scsi/aacraid/commctrl.c +++ b/drivers/scsi/aacraid/commctrl.c @@ -63,7 +63,7 @@ static int ioctl_send_fib(struct aac_dev * dev, void __user *arg) struct fib *fibptr; struct hw_fib * hw_fib = (struct hw_fib *)0; dma_addr_t hw_fib_pa = (dma_addr_t)0LL; - unsigned size; + unsigned int size, osize; int retval; if (dev->in_reset) { @@ -87,7 +87,8 @@ static int ioctl_send_fib(struct aac_dev * dev, void __user *arg) * will not overrun the buffer when we copy the memory. Return * an error if we would. */ - size = le16_to_cpu(kfib->header.Size) + sizeof(struct aac_fibhdr); + osize = size = le16_to_cpu(kfib->header.Size) + + sizeof(struct aac_fibhdr); if (size < le16_to_cpu(kfib->header.SenderSize)) size = le16_to_cpu(kfib->header.SenderSize); if (size > dev->max_fib_size) { @@ -118,6 +119,14 @@ static int ioctl_send_fib(struct aac_dev * dev, void __user *arg) goto cleanup; } + /* Sanity check the second copy */ + if ((osize != le16_to_cpu(kfib->header.Size) + + sizeof(struct aac_fibhdr)) + || (size < le16_to_cpu(kfib->header.SenderSize))) { + retval = -EINVAL; + goto cleanup; + } + if (kfib->header.Command == cpu_to_le16(TakeABreakPt)) { aac_adapter_interrupt(dev); /* -- cgit v1.2.3 From c39b487f195b93235ee76384427467786f7bf29f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 9 Aug 2016 00:20:28 -0400 Subject: Revert "drm/amdgpu: work around lack of upstream ACPI support for D3cold" This reverts commit c63695cc5e5f685e924e25a8f9555f6e846f1fc6. Now that d3cold support is upstream, there is no more need for this workaround. bug: https://bugs.freedesktop.org/show_bug.cgi?id=97248 --- drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c index 49de92600074..10b5ddf2c588 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c @@ -200,16 +200,7 @@ static int amdgpu_atpx_validate(struct amdgpu_atpx *atpx) atpx->is_hybrid = false; if (valid_bits & ATPX_MS_HYBRID_GFX_SUPPORTED) { printk("ATPX Hybrid Graphics\n"); -#if 1 - /* This is a temporary hack until the D3 cold support - * makes it upstream. The ATPX power_control method seems - * to still work on even if the system should be using - * the new standardized hybrid D3 cold ACPI interface. - */ - atpx->functions.power_cntl = true; -#else atpx->functions.power_cntl = false; -#endif atpx->is_hybrid = true; } -- cgit v1.2.3 From b817634276f7f68c9d1d6d4a27117ff3c2f16956 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 9 Aug 2016 00:21:45 -0400 Subject: Revert "drm/radeon: work around lack of upstream ACPI support for D3cold" This reverts commit bdfb76040068d960cb9e226876be8a508d741c4a. Now that d3cold is upstream, there is no more need for this workaround. --- drivers/gpu/drm/radeon/radeon_atpx_handler.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index 6de342861202..ddef0d494084 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -198,16 +198,7 @@ static int radeon_atpx_validate(struct radeon_atpx *atpx) atpx->is_hybrid = false; if (valid_bits & ATPX_MS_HYBRID_GFX_SUPPORTED) { printk("ATPX Hybrid Graphics\n"); -#if 1 - /* This is a temporary hack until the D3 cold support - * makes it upstream. The ATPX power_control method seems - * to still work on even if the system should be using - * the new standardized hybrid D3 cold ACPI interface. - */ - atpx->functions.power_cntl = true; -#else atpx->functions.power_cntl = false; -#endif atpx->is_hybrid = true; } -- cgit v1.2.3 From c0c45a6bd7d054efd80c1033bf4285830c72835b Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Mon, 8 Aug 2016 21:57:40 -0400 Subject: qed: Remove the endian-ness conversion for pri_to_tc value. Endian-ness conversion is not needed for priority-to-TC field as the field is already being read/written by the driver in big-endian way. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index d0dc28f93c0e..68693309f59e 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -483,7 +483,7 @@ qed_dcbx_get_ets_data(struct qed_hwfn *p_hwfn, bw_map[1] = be32_to_cpu(p_ets->tc_bw_tbl[1]); tsa_map[0] = be32_to_cpu(p_ets->tc_tsa_tbl[0]); tsa_map[1] = be32_to_cpu(p_ets->tc_tsa_tbl[1]); - pri_map = be32_to_cpu(p_ets->pri_tc_tbl[0]); + pri_map = p_ets->pri_tc_tbl[0]; for (i = 0; i < QED_MAX_PFC_PRIORITIES; i++) { p_params->ets_tc_bw_tbl[i] = ((u8 *)bw_map)[i]; p_params->ets_tc_tsa_tbl[i] = ((u8 *)tsa_map)[i]; @@ -944,7 +944,6 @@ qed_dcbx_set_ets_data(struct qed_hwfn *p_hwfn, val = (((u32)p_params->ets_pri_tc_tbl[i]) << ((7 - i) * 4)); p_ets->pri_tc_tbl[0] |= val; } - p_ets->pri_tc_tbl[0] = cpu_to_be32(p_ets->pri_tc_tbl[0]); for (i = 0; i < 2; i++) { p_ets->tc_bw_tbl[i] = cpu_to_be32(p_ets->tc_bw_tbl[i]); p_ets->tc_tsa_tbl[i] = cpu_to_be32(p_ets->tc_tsa_tbl[i]); -- cgit v1.2.3 From fb9ea8a9b70c79f38d2758c25d3acff4a2cd5bfb Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Mon, 8 Aug 2016 21:57:41 -0400 Subject: qed: Use ieee mfw-mask to get ethtype in ieee-dcbx mode. Ethtype value is being read incorrectly in ieee-dcbx mode. Use the correct mfw mask value. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 88 ++++++++++++++++++++---------- drivers/net/ethernet/qlogic/qed/qed_hsi.h | 8 +++ 2 files changed, 66 insertions(+), 30 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index 68693309f59e..f07f0ac239f6 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -52,16 +52,33 @@ static bool qed_dcbx_app_ethtype(u32 app_info_bitmap) DCBX_APP_SF_ETHTYPE); } +static bool qed_dcbx_ieee_app_ethtype(u32 app_info_bitmap) +{ + u8 mfw_val = QED_MFW_GET_FIELD(app_info_bitmap, DCBX_APP_SF_IEEE); + + /* Old MFW */ + if (mfw_val == DCBX_APP_SF_IEEE_RESERVED) + return qed_dcbx_app_ethtype(app_info_bitmap); + + return !!(mfw_val == DCBX_APP_SF_IEEE_ETHTYPE); +} + static bool qed_dcbx_app_port(u32 app_info_bitmap) { return !!(QED_MFW_GET_FIELD(app_info_bitmap, DCBX_APP_SF) == DCBX_APP_SF_PORT); } -static bool qed_dcbx_default_tlv(u32 app_info_bitmap, u16 proto_id) +static bool qed_dcbx_default_tlv(u32 app_info_bitmap, u16 proto_id, bool ieee) { - return !!(qed_dcbx_app_ethtype(app_info_bitmap) && - proto_id == QED_ETH_TYPE_DEFAULT); + bool ethtype; + + if (ieee) + ethtype = qed_dcbx_ieee_app_ethtype(app_info_bitmap); + else + ethtype = qed_dcbx_app_ethtype(app_info_bitmap); + + return !!(ethtype && (proto_id == QED_ETH_TYPE_DEFAULT)); } static bool qed_dcbx_iscsi_tlv(u32 app_info_bitmap, u16 proto_id) @@ -70,16 +87,28 @@ static bool qed_dcbx_iscsi_tlv(u32 app_info_bitmap, u16 proto_id) proto_id == QED_TCP_PORT_ISCSI); } -static bool qed_dcbx_fcoe_tlv(u32 app_info_bitmap, u16 proto_id) +static bool qed_dcbx_fcoe_tlv(u32 app_info_bitmap, u16 proto_id, bool ieee) { - return !!(qed_dcbx_app_ethtype(app_info_bitmap) && - proto_id == QED_ETH_TYPE_FCOE); + bool ethtype; + + if (ieee) + ethtype = qed_dcbx_ieee_app_ethtype(app_info_bitmap); + else + ethtype = qed_dcbx_app_ethtype(app_info_bitmap); + + return !!(ethtype && (proto_id == QED_ETH_TYPE_FCOE)); } -static bool qed_dcbx_roce_tlv(u32 app_info_bitmap, u16 proto_id) +static bool qed_dcbx_roce_tlv(u32 app_info_bitmap, u16 proto_id, bool ieee) { - return !!(qed_dcbx_app_ethtype(app_info_bitmap) && - proto_id == QED_ETH_TYPE_ROCE); + bool ethtype; + + if (ieee) + ethtype = qed_dcbx_ieee_app_ethtype(app_info_bitmap); + else + ethtype = qed_dcbx_app_ethtype(app_info_bitmap); + + return !!(ethtype && (proto_id == QED_ETH_TYPE_ROCE)); } static bool qed_dcbx_roce_v2_tlv(u32 app_info_bitmap, u16 proto_id) @@ -164,15 +193,15 @@ qed_dcbx_update_app_info(struct qed_dcbx_results *p_data, static bool qed_dcbx_get_app_protocol_type(struct qed_hwfn *p_hwfn, u32 app_prio_bitmap, - u16 id, enum dcbx_protocol_type *type) + u16 id, enum dcbx_protocol_type *type, bool ieee) { - if (qed_dcbx_fcoe_tlv(app_prio_bitmap, id)) { + if (qed_dcbx_fcoe_tlv(app_prio_bitmap, id, ieee)) { *type = DCBX_PROTOCOL_FCOE; - } else if (qed_dcbx_roce_tlv(app_prio_bitmap, id)) { + } else if (qed_dcbx_roce_tlv(app_prio_bitmap, id, ieee)) { *type = DCBX_PROTOCOL_ROCE; } else if (qed_dcbx_iscsi_tlv(app_prio_bitmap, id)) { *type = DCBX_PROTOCOL_ISCSI; - } else if (qed_dcbx_default_tlv(app_prio_bitmap, id)) { + } else if (qed_dcbx_default_tlv(app_prio_bitmap, id, ieee)) { *type = DCBX_PROTOCOL_ETH; } else if (qed_dcbx_roce_v2_tlv(app_prio_bitmap, id)) { *type = DCBX_PROTOCOL_ROCE_V2; @@ -194,17 +223,18 @@ static int qed_dcbx_process_tlv(struct qed_hwfn *p_hwfn, struct qed_dcbx_results *p_data, struct dcbx_app_priority_entry *p_tbl, - u32 pri_tc_tbl, int count, bool dcbx_enabled) + u32 pri_tc_tbl, int count, u8 dcbx_version) { u8 tc, priority_map; enum dcbx_protocol_type type; + bool enable, ieee; u16 protocol_id; int priority; - bool enable; int i; DP_VERBOSE(p_hwfn, QED_MSG_DCB, "Num APP entries = %d\n", count); + ieee = (dcbx_version == DCBX_CONFIG_VERSION_IEEE); /* Parse APP TLV */ for (i = 0; i < count; i++) { protocol_id = QED_MFW_GET_FIELD(p_tbl[i].entry, @@ -219,7 +249,7 @@ qed_dcbx_process_tlv(struct qed_hwfn *p_hwfn, tc = QED_DCBX_PRIO2TC(pri_tc_tbl, priority); if (qed_dcbx_get_app_protocol_type(p_hwfn, p_tbl[i].entry, - protocol_id, &type)) { + protocol_id, &type, ieee)) { /* ETH always have the enable bit reset, as it gets * vlan information per packet. For other protocols, * should be set according to the dcbx_enabled @@ -275,15 +305,12 @@ static int qed_dcbx_process_mib_info(struct qed_hwfn *p_hwfn) struct dcbx_ets_feature *p_ets; struct qed_hw_info *p_info; u32 pri_tc_tbl, flags; - bool dcbx_enabled; + u8 dcbx_version; int num_entries; int rc = 0; - /* If DCBx version is non zero, then negotiation was - * successfuly performed - */ flags = p_hwfn->p_dcbx_info->operational.flags; - dcbx_enabled = !!QED_MFW_GET_FIELD(flags, DCBX_CONFIG_VERSION); + dcbx_version = QED_MFW_GET_FIELD(flags, DCBX_CONFIG_VERSION); p_app = &p_hwfn->p_dcbx_info->operational.features.app; p_tbl = p_app->app_pri_tbl; @@ -295,13 +322,13 @@ static int qed_dcbx_process_mib_info(struct qed_hwfn *p_hwfn) num_entries = QED_MFW_GET_FIELD(p_app->flags, DCBX_APP_NUM_ENTRIES); rc = qed_dcbx_process_tlv(p_hwfn, &data, p_tbl, pri_tc_tbl, - num_entries, dcbx_enabled); + num_entries, dcbx_version); if (rc) return rc; p_info->num_tc = QED_MFW_GET_FIELD(p_ets->flags, DCBX_ETS_MAX_TCS); data.pf_id = p_hwfn->rel_pf_id; - data.dcbx_enabled = dcbx_enabled; + data.dcbx_enabled = !!dcbx_version; qed_dcbx_dp_protocol(p_hwfn, &data); @@ -400,7 +427,7 @@ static void qed_dcbx_get_app_data(struct qed_hwfn *p_hwfn, struct dcbx_app_priority_feature *p_app, struct dcbx_app_priority_entry *p_tbl, - struct qed_dcbx_params *p_params) + struct qed_dcbx_params *p_params, bool ieee) { struct qed_app_entry *entry; u8 pri_map; @@ -422,7 +449,7 @@ qed_dcbx_get_app_data(struct qed_hwfn *p_hwfn, DCBX_APP_PROTOCOL_ID); qed_dcbx_get_app_protocol_type(p_hwfn, p_tbl[i].entry, entry->proto_id, - &entry->proto_type); + &entry->proto_type, ieee); } DP_VERBOSE(p_hwfn, QED_MSG_DCB, @@ -500,9 +527,9 @@ qed_dcbx_get_common_params(struct qed_hwfn *p_hwfn, struct dcbx_app_priority_feature *p_app, struct dcbx_app_priority_entry *p_tbl, struct dcbx_ets_feature *p_ets, - u32 pfc, struct qed_dcbx_params *p_params) + u32 pfc, struct qed_dcbx_params *p_params, bool ieee) { - qed_dcbx_get_app_data(p_hwfn, p_app, p_tbl, p_params); + qed_dcbx_get_app_data(p_hwfn, p_app, p_tbl, p_params, ieee); qed_dcbx_get_ets_data(p_hwfn, p_ets, p_params); qed_dcbx_get_pfc_data(p_hwfn, pfc, p_params); } @@ -516,7 +543,7 @@ qed_dcbx_get_local_params(struct qed_hwfn *p_hwfn, p_feat = &p_hwfn->p_dcbx_info->local_admin.features; qed_dcbx_get_common_params(p_hwfn, &p_feat->app, p_feat->app.app_pri_tbl, &p_feat->ets, - p_feat->pfc, ¶ms->local.params); + p_feat->pfc, ¶ms->local.params, false); params->local.valid = true; } @@ -529,7 +556,7 @@ qed_dcbx_get_remote_params(struct qed_hwfn *p_hwfn, p_feat = &p_hwfn->p_dcbx_info->remote.features; qed_dcbx_get_common_params(p_hwfn, &p_feat->app, p_feat->app.app_pri_tbl, &p_feat->ets, - p_feat->pfc, ¶ms->remote.params); + p_feat->pfc, ¶ms->remote.params, false); params->remote.valid = true; } @@ -574,7 +601,8 @@ qed_dcbx_get_operational_params(struct qed_hwfn *p_hwfn, qed_dcbx_get_common_params(p_hwfn, &p_feat->app, p_feat->app.app_pri_tbl, &p_feat->ets, - p_feat->pfc, ¶ms->operational.params); + p_feat->pfc, ¶ms->operational.params, + p_operational->ieee); qed_dcbx_get_priority_info(p_hwfn, &p_operational->app_prio, p_results); err = QED_MFW_GET_FIELD(p_feat->app.flags, DCBX_APP_ERROR); p_operational->err = err; diff --git a/drivers/net/ethernet/qlogic/qed/qed_hsi.h b/drivers/net/ethernet/qlogic/qed/qed_hsi.h index 592784019994..6f9d3b831a2a 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_hsi.h +++ b/drivers/net/ethernet/qlogic/qed/qed_hsi.h @@ -6850,6 +6850,14 @@ struct dcbx_app_priority_entry { #define DCBX_APP_SF_SHIFT 8 #define DCBX_APP_SF_ETHTYPE 0 #define DCBX_APP_SF_PORT 1 +#define DCBX_APP_SF_IEEE_MASK 0x0000f000 +#define DCBX_APP_SF_IEEE_SHIFT 12 +#define DCBX_APP_SF_IEEE_RESERVED 0 +#define DCBX_APP_SF_IEEE_ETHTYPE 1 +#define DCBX_APP_SF_IEEE_TCP_PORT 2 +#define DCBX_APP_SF_IEEE_UDP_PORT 3 +#define DCBX_APP_SF_IEEE_TCP_UDP_PORT 4 + #define DCBX_APP_PROTOCOL_ID_MASK 0xffff0000 #define DCBX_APP_PROTOCOL_ID_SHIFT 16 }; -- cgit v1.2.3 From 59bcb7972fc5d53a621ee6b2c3cf1654cebb3dc5 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Mon, 8 Aug 2016 21:57:42 -0400 Subject: qed: Add dcbx app support for IEEE Selection Field. MFW now supports the Selection field for IEEE mode. Add driver changes to use the newer MFW masks to read/write the port-id value. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 124 ++++++++++++++++++++++++----- include/linux/qed/qed_if.h | 8 ++ 2 files changed, 112 insertions(+), 20 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index f07f0ac239f6..b157a6aba277 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -69,6 +69,17 @@ static bool qed_dcbx_app_port(u32 app_info_bitmap) DCBX_APP_SF_PORT); } +static bool qed_dcbx_ieee_app_port(u32 app_info_bitmap, u8 type) +{ + u8 mfw_val = QED_MFW_GET_FIELD(app_info_bitmap, DCBX_APP_SF_IEEE); + + /* Old MFW */ + if (mfw_val == DCBX_APP_SF_IEEE_RESERVED) + return qed_dcbx_app_port(app_info_bitmap); + + return !!(mfw_val == type || mfw_val == DCBX_APP_SF_IEEE_TCP_UDP_PORT); +} + static bool qed_dcbx_default_tlv(u32 app_info_bitmap, u16 proto_id, bool ieee) { bool ethtype; @@ -81,10 +92,17 @@ static bool qed_dcbx_default_tlv(u32 app_info_bitmap, u16 proto_id, bool ieee) return !!(ethtype && (proto_id == QED_ETH_TYPE_DEFAULT)); } -static bool qed_dcbx_iscsi_tlv(u32 app_info_bitmap, u16 proto_id) +static bool qed_dcbx_iscsi_tlv(u32 app_info_bitmap, u16 proto_id, bool ieee) { - return !!(qed_dcbx_app_port(app_info_bitmap) && - proto_id == QED_TCP_PORT_ISCSI); + bool port; + + if (ieee) + port = qed_dcbx_ieee_app_port(app_info_bitmap, + DCBX_APP_SF_IEEE_TCP_PORT); + else + port = qed_dcbx_app_port(app_info_bitmap); + + return !!(port && (proto_id == QED_TCP_PORT_ISCSI)); } static bool qed_dcbx_fcoe_tlv(u32 app_info_bitmap, u16 proto_id, bool ieee) @@ -111,10 +129,17 @@ static bool qed_dcbx_roce_tlv(u32 app_info_bitmap, u16 proto_id, bool ieee) return !!(ethtype && (proto_id == QED_ETH_TYPE_ROCE)); } -static bool qed_dcbx_roce_v2_tlv(u32 app_info_bitmap, u16 proto_id) +static bool qed_dcbx_roce_v2_tlv(u32 app_info_bitmap, u16 proto_id, bool ieee) { - return !!(qed_dcbx_app_port(app_info_bitmap) && - proto_id == QED_UDP_PORT_TYPE_ROCE_V2); + bool port; + + if (ieee) + port = qed_dcbx_ieee_app_port(app_info_bitmap, + DCBX_APP_SF_IEEE_UDP_PORT); + else + port = qed_dcbx_app_port(app_info_bitmap); + + return !!(port && (proto_id == QED_UDP_PORT_TYPE_ROCE_V2)); } static void @@ -199,11 +224,11 @@ qed_dcbx_get_app_protocol_type(struct qed_hwfn *p_hwfn, *type = DCBX_PROTOCOL_FCOE; } else if (qed_dcbx_roce_tlv(app_prio_bitmap, id, ieee)) { *type = DCBX_PROTOCOL_ROCE; - } else if (qed_dcbx_iscsi_tlv(app_prio_bitmap, id)) { + } else if (qed_dcbx_iscsi_tlv(app_prio_bitmap, id, ieee)) { *type = DCBX_PROTOCOL_ISCSI; } else if (qed_dcbx_default_tlv(app_prio_bitmap, id, ieee)) { *type = DCBX_PROTOCOL_ETH; - } else if (qed_dcbx_roce_v2_tlv(app_prio_bitmap, id)) { + } else if (qed_dcbx_roce_v2_tlv(app_prio_bitmap, id, ieee)) { *type = DCBX_PROTOCOL_ROCE_V2; } else { *type = DCBX_MAX_PROTOCOL_TYPE; @@ -441,8 +466,39 @@ qed_dcbx_get_app_data(struct qed_hwfn *p_hwfn, DCBX_APP_NUM_ENTRIES); for (i = 0; i < DCBX_MAX_APP_PROTOCOL; i++) { entry = &p_params->app_entry[i]; - entry->ethtype = !(QED_MFW_GET_FIELD(p_tbl[i].entry, - DCBX_APP_SF)); + if (ieee) { + u8 sf_ieee; + u32 val; + + sf_ieee = QED_MFW_GET_FIELD(p_tbl[i].entry, + DCBX_APP_SF_IEEE); + switch (sf_ieee) { + case DCBX_APP_SF_IEEE_RESERVED: + /* Old MFW */ + val = QED_MFW_GET_FIELD(p_tbl[i].entry, + DCBX_APP_SF); + entry->sf_ieee = val ? + QED_DCBX_SF_IEEE_TCP_UDP_PORT : + QED_DCBX_SF_IEEE_ETHTYPE; + break; + case DCBX_APP_SF_IEEE_ETHTYPE: + entry->sf_ieee = QED_DCBX_SF_IEEE_ETHTYPE; + break; + case DCBX_APP_SF_IEEE_TCP_PORT: + entry->sf_ieee = QED_DCBX_SF_IEEE_TCP_PORT; + break; + case DCBX_APP_SF_IEEE_UDP_PORT: + entry->sf_ieee = QED_DCBX_SF_IEEE_UDP_PORT; + break; + case DCBX_APP_SF_IEEE_TCP_UDP_PORT: + entry->sf_ieee = QED_DCBX_SF_IEEE_TCP_UDP_PORT; + break; + } + } else { + entry->ethtype = !(QED_MFW_GET_FIELD(p_tbl[i].entry, + DCBX_APP_SF)); + } + pri_map = QED_MFW_GET_FIELD(p_tbl[i].entry, DCBX_APP_PRI_MAP); entry->prio = ffs(pri_map) - 1; entry->proto_id = QED_MFW_GET_FIELD(p_tbl[i].entry, @@ -981,7 +1037,7 @@ qed_dcbx_set_ets_data(struct qed_hwfn *p_hwfn, static void qed_dcbx_set_app_data(struct qed_hwfn *p_hwfn, struct dcbx_app_priority_feature *p_app, - struct qed_dcbx_params *p_params) + struct qed_dcbx_params *p_params, bool ieee) { u32 *entry; int i; @@ -1002,12 +1058,36 @@ qed_dcbx_set_app_data(struct qed_hwfn *p_hwfn, for (i = 0; i < DCBX_MAX_APP_PROTOCOL; i++) { entry = &p_app->app_pri_tbl[i].entry; - *entry &= ~DCBX_APP_SF_MASK; - if (p_params->app_entry[i].ethtype) - *entry |= ((u32)DCBX_APP_SF_ETHTYPE << - DCBX_APP_SF_SHIFT); - else - *entry |= ((u32)DCBX_APP_SF_PORT << DCBX_APP_SF_SHIFT); + if (ieee) { + *entry &= ~DCBX_APP_SF_IEEE_MASK; + switch (p_params->app_entry[i].sf_ieee) { + case QED_DCBX_SF_IEEE_ETHTYPE: + *entry |= ((u32)DCBX_APP_SF_IEEE_ETHTYPE << + DCBX_APP_SF_IEEE_SHIFT); + break; + case QED_DCBX_SF_IEEE_TCP_PORT: + *entry |= ((u32)DCBX_APP_SF_IEEE_TCP_PORT << + DCBX_APP_SF_IEEE_SHIFT); + break; + case QED_DCBX_SF_IEEE_UDP_PORT: + *entry |= ((u32)DCBX_APP_SF_IEEE_UDP_PORT << + DCBX_APP_SF_IEEE_SHIFT); + break; + case QED_DCBX_SF_IEEE_TCP_UDP_PORT: + *entry |= ((u32)DCBX_APP_SF_IEEE_TCP_UDP_PORT << + DCBX_APP_SF_IEEE_SHIFT); + break; + } + } else { + *entry &= ~DCBX_APP_SF_MASK; + if (p_params->app_entry[i].ethtype) + *entry |= ((u32)DCBX_APP_SF_ETHTYPE << + DCBX_APP_SF_SHIFT); + else + *entry |= ((u32)DCBX_APP_SF_PORT << + DCBX_APP_SF_SHIFT); + } + *entry &= ~DCBX_APP_PROTOCOL_ID_MASK; *entry |= ((u32)p_params->app_entry[i].proto_id << DCBX_APP_PROTOCOL_ID_SHIFT); @@ -1022,15 +1102,19 @@ qed_dcbx_set_local_params(struct qed_hwfn *p_hwfn, struct dcbx_local_params *local_admin, struct qed_dcbx_set *params) { + bool ieee = false; + local_admin->flags = 0; memcpy(&local_admin->features, &p_hwfn->p_dcbx_info->operational.features, sizeof(local_admin->features)); - if (params->enabled) + if (params->enabled) { local_admin->config = params->ver_num; - else + ieee = !!(params->ver_num & DCBX_CONFIG_VERSION_IEEE); + } else { local_admin->config = DCBX_CONFIG_VERSION_DISABLED; + } if (params->override_flags & QED_DCBX_OVERRIDE_PFC_CFG) qed_dcbx_set_pfc_data(p_hwfn, &local_admin->features.pfc, @@ -1042,7 +1126,7 @@ qed_dcbx_set_local_params(struct qed_hwfn *p_hwfn, if (params->override_flags & QED_DCBX_OVERRIDE_APP_CFG) qed_dcbx_set_app_data(p_hwfn, &local_admin->features.app, - ¶ms->config.params); + ¶ms->config.params, ieee); } int qed_dcbx_config_params(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, diff --git a/include/linux/qed/qed_if.h b/include/linux/qed/qed_if.h index b1e3c57c7117..d6c4177df7cb 100644 --- a/include/linux/qed/qed_if.h +++ b/include/linux/qed/qed_if.h @@ -70,8 +70,16 @@ struct qed_dbcx_pfc_params { u8 max_tc; }; +enum qed_dcbx_sf_ieee_type { + QED_DCBX_SF_IEEE_ETHTYPE, + QED_DCBX_SF_IEEE_TCP_PORT, + QED_DCBX_SF_IEEE_UDP_PORT, + QED_DCBX_SF_IEEE_TCP_UDP_PORT +}; + struct qed_app_entry { bool ethtype; + enum qed_dcbx_sf_ieee_type sf_ieee; bool enabled; u8 prio; u16 proto_id; -- cgit v1.2.3 From 1d7406ce7bdfc48cd7390f793d23ef81fff75880 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Mon, 8 Aug 2016 21:57:43 -0400 Subject: qed: Update app count when adding a new dcbx app entry to the table. App count is not updated while adding new app entry to the dcbx app table. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index b157a6aba277..226cb08cc055 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -1707,8 +1707,10 @@ static int qed_dcbnl_setapp(struct qed_dev *cdev, if ((entry->ethtype == ethtype) && (entry->proto_id == idval)) break; /* First empty slot */ - if (!entry->proto_id) + if (!entry->proto_id) { + dcbx_set.config.params.num_app_entries++; break; + } } if (i == QED_DCBX_MAX_APP_PROTOCOL) { @@ -2228,8 +2230,10 @@ int qed_dcbnl_ieee_setapp(struct qed_dev *cdev, struct dcb_app *app) (entry->proto_id == app->protocol)) break; /* First empty slot */ - if (!entry->proto_id) + if (!entry->proto_id) { + dcbx_set.config.params.num_app_entries++; break; + } } if (i == QED_DCBX_MAX_APP_PROTOCOL) { -- cgit v1.2.3 From 6dae61627d1004895bfcee81d24482ec64cbecc5 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 13 Jul 2016 08:36:03 +0100 Subject: drm/amdkfd: print doorbell offset as a hex value The doorbell offset is formatted with a 0x prefix to suggest it is a hexadecimal value, when in fact %d is being used and this is confusing. Use %X instead to match the proceeding 0x prefix. Signed-off-by: Colin Ian King Signed-off-by: Oded Gabbay --- drivers/gpu/drm/amd/amdkfd/kfd_doorbell.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_doorbell.c b/drivers/gpu/drm/amd/amdkfd/kfd_doorbell.c index e621eba63126..a7d3cb3fead0 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_doorbell.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_doorbell.c @@ -184,7 +184,7 @@ u32 __iomem *kfd_get_kernel_doorbell(struct kfd_dev *kfd, sizeof(u32)) + inx; pr_debug("kfd: get kernel queue doorbell\n" - " doorbell offset == 0x%08d\n" + " doorbell offset == 0x%08X\n" " kernel address == 0x%08lX\n", *doorbell_off, (uintptr_t)(kfd->doorbell_kernel_ptr + inx)); -- cgit v1.2.3 From b173a28f62cf929324a8a6adcc45adadce311d16 Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Mon, 8 Aug 2016 21:57:58 +0800 Subject: netfilter: nf_ct_expect: remove the redundant slash when policy name is empty The 'name' filed in struct nf_conntrack_expect_policy{} is not a pointer, so check it is NULL or not will always return true. Even if the name is empty, slash will always be displayed like follows: # cat /proc/net/nf_conntrack_expect 297 l3proto = 2 proto=6 src=1.1.1.1 dst=2.2.2.2 sport=1 dport=1025 ftp/ ^ Fixes: 3a8fc53a45c4 ("netfilter: nf_ct_helper: allocate 16 bytes for the helper and policy names") Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_expect.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c index 9e3693128313..f8dbacf66795 100644 --- a/net/netfilter/nf_conntrack_expect.c +++ b/net/netfilter/nf_conntrack_expect.c @@ -574,7 +574,7 @@ static int exp_seq_show(struct seq_file *s, void *v) helper = rcu_dereference(nfct_help(expect->master)->helper); if (helper) { seq_printf(s, "%s%s", expect->flags ? " " : "", helper->name); - if (helper->expect_policy[expect->class].name) + if (helper->expect_policy[expect->class].name[0]) seq_printf(s, "/%s", helper->expect_policy[expect->class].name); } -- cgit v1.2.3 From b18bcb0019cf57a3db0917b77e65c29bd9b00f54 Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Mon, 8 Aug 2016 22:03:40 +0800 Subject: netfilter: nfnetlink_queue: fix memory leak when attach expectation successfully User can use NFQA_EXP to attach expectations to conntracks, but we forget to put back nf_conntrack_expect when it is inserted successfully, i.e. in this normal case, expect's use refcnt will be 3. So even we unlink it and put it back later, the use refcnt is still 1, then the memory will be leaked forever. Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_netlink.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 050bb3420a6b..b9bfe64e232c 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -2362,12 +2362,8 @@ ctnetlink_glue_attach_expect(const struct nlattr *attr, struct nf_conn *ct, return PTR_ERR(exp); err = nf_ct_expect_related_report(exp, portid, report); - if (err < 0) { - nf_ct_expect_put(exp); - return err; - } - - return 0; + nf_ct_expect_put(exp); + return err; } static void ctnetlink_glue_seqadj(struct sk_buff *skb, struct nf_conn *ct, -- cgit v1.2.3 From 00a3101f561816e58de054a470484996f78eb5eb Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Mon, 8 Aug 2016 22:07:27 +0800 Subject: netfilter: nfnetlink_queue: reject verdict request from different portid Like NFQNL_MSG_VERDICT_BATCH do, we should also reject the verdict request when the portid is not same with the initial portid(maybe from another process). Fixes: 97d32cf9440d ("netfilter: nfnetlink_queue: batch verdict support") Signed-off-by: Liping Zhang Reviewed-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nfnetlink_queue.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c index 5d36a0926b4a..f49f45081acb 100644 --- a/net/netfilter/nfnetlink_queue.c +++ b/net/netfilter/nfnetlink_queue.c @@ -1145,10 +1145,8 @@ static int nfqnl_recv_verdict(struct net *net, struct sock *ctnl, struct nfnl_queue_net *q = nfnl_queue_pernet(net); int err; - queue = instance_lookup(q, queue_num); - if (!queue) - queue = verdict_instance_lookup(q, queue_num, - NETLINK_CB(skb).portid); + queue = verdict_instance_lookup(q, queue_num, + NETLINK_CB(skb).portid); if (IS_ERR(queue)) return PTR_ERR(queue); -- cgit v1.2.3 From aa0c2c68abd1e2915656cc81afdb195bc8595dec Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Mon, 8 Aug 2016 22:10:26 +0800 Subject: netfilter: ctnetlink: reject new conntrack request with different l4proto Currently, user can add a conntrack with different l4proto via nfnetlink. For example, original tuple is TCP while reply tuple is SCTP. This is invalid combination, we should report EINVAL to userspace. Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_netlink.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index b9bfe64e232c..fdfc71f416b7 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -1894,6 +1894,8 @@ static int ctnetlink_new_conntrack(struct net *net, struct sock *ctnl, if (!cda[CTA_TUPLE_ORIG] || !cda[CTA_TUPLE_REPLY]) return -EINVAL; + if (otuple.dst.protonum != rtuple.dst.protonum) + return -EINVAL; ct = ctnetlink_create_conntrack(net, &zone, cda, &otuple, &rtuple, u3); -- cgit v1.2.3 From 55cae7a403f3b52de3dd6e4a614582541c9631af Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 8 Aug 2016 12:13:45 +0200 Subject: rxrpc: fix uninitialized pointer dereference in debug code A newly added bugfix caused an uninitialized variable to be used for printing debug output. This is harmless as long as the debug setting is disabled, but otherwise leads to an immediate crash. gcc warns about this when -Wmaybe-uninitialized is enabled: net/rxrpc/call_object.c: In function 'rxrpc_release_call': net/rxrpc/call_object.c:496:163: error: 'sp' may be used uninitialized in this function [-Werror=maybe-uninitialized] The initialization was removed but one of the users remains. This adds back the initialization. Signed-off-by: Arnd Bergmann Fixes: 372ee16386bb ("rxrpc: Fix races between skb free, ACK generation and replying") Signed-off-by: David Howells --- net/rxrpc/call_object.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/rxrpc/call_object.c b/net/rxrpc/call_object.c index c47f14fc5e88..e8c953c48cb8 100644 --- a/net/rxrpc/call_object.c +++ b/net/rxrpc/call_object.c @@ -493,6 +493,7 @@ void rxrpc_release_call(struct rxrpc_call *call) (skb = skb_dequeue(&call->rx_oos_queue))) { spin_unlock_bh(&call->lock); + sp = rxrpc_skb(skb); _debug("- zap %s %%%u #%u", rxrpc_pkts[sp->hdr.type], sp->hdr.serial, sp->hdr.seq); -- cgit v1.2.3 From c12abf346456416ca7f7ba45f363cf92d2480a99 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 9 Aug 2016 08:46:15 +1000 Subject: crypto: powerpc - CRYPT_CRC32C_VPMSUM should depend on ALTIVEC The optimised crc32c implementation depends on VMX (aka. Altivec) instructions, so the kernel must be built with Altivec support in order for the crc32c code to build. Fixes: 6dd7a82cc54e ("crypto: powerpc - Add POWER8 optimised crc32c") Acked-by: Anton Blanchard Signed-off-by: Michael Ellerman Signed-off-by: Herbert Xu --- crypto/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/crypto/Kconfig b/crypto/Kconfig index a9377bef25e3..84d71482bf08 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -439,7 +439,7 @@ config CRYPTO_CRC32C_INTEL config CRYPT_CRC32C_VPMSUM tristate "CRC32c CRC algorithm (powerpc64)" - depends on PPC64 + depends on PPC64 && ALTIVEC select CRYPTO_HASH select CRC32 help -- cgit v1.2.3 From a0118c8b2be9297aed8e915c60b4013326b256d4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 9 Aug 2016 08:27:17 +0100 Subject: crypto: caam - fix non-hmac hashes Since 6de62f15b581 ("crypto: algif_hash - Require setkey before accept(2)"), the AF_ALG interface requires userspace to provide a key to any algorithm that has a setkey method. However, the non-HMAC algorithms are not keyed, so setting a key is unnecessary. Fix this by removing the setkey method from the non-keyed hash algorithms. Fixes: 6de62f15b581 ("crypto: algif_hash - Require setkey before accept(2)") Cc: Signed-off-by: Russell King Signed-off-by: Herbert Xu --- drivers/crypto/caam/caamhash.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/crypto/caam/caamhash.c b/drivers/crypto/caam/caamhash.c index f1ecc8df8d41..36365b3efdfd 100644 --- a/drivers/crypto/caam/caamhash.c +++ b/drivers/crypto/caam/caamhash.c @@ -1898,6 +1898,7 @@ caam_hash_alloc(struct caam_hash_template *template, template->name); snprintf(alg->cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s", template->driver_name); + t_alg->ahash_alg.setkey = NULL; } alg->cra_module = THIS_MODULE; alg->cra_init = caam_hash_cra_init; -- cgit v1.2.3 From 6bb47e8ab98accb1319bd43c64966340ba3bba9a Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Aug 2016 13:32:22 -0700 Subject: usb: hub: Fix unbalanced reference count/memory leak/deadlocks Memory leak and unbalanced reference count: If the hub gets disconnected while the core is still activating it, this can result in leaking memory of few USB structures. This will happen if we have done a kref_get() from hub_activate() and scheduled a delayed work item for HUB_INIT2/3. Now if hub_disconnect() gets called before the delayed work expires, then we will cancel the work from hub_quiesce(), but wouldn't do a kref_put(). And so the unbalance. kmemleak reports this as (with the commit e50293ef9775 backported to 3.10 kernel with other changes, though the same is true for mainline as well): unreferenced object 0xffffffc08af5b800 (size 1024): comm "khubd", pid 73, jiffies 4295051211 (age 6482.350s) hex dump (first 32 bytes): 30 68 f3 8c c0 ff ff ff 00 a0 b2 2e c0 ff ff ff 0h.............. 01 00 00 00 00 00 00 00 00 94 7d 40 c0 ff ff ff ..........}@.... backtrace: [] create_object+0x148/0x2a0 [] kmemleak_alloc+0x80/0xbc [] kmem_cache_alloc_trace+0x120/0x1ac [] hub_probe+0x120/0xb84 [] usb_probe_interface+0x1ec/0x298 [] driver_probe_device+0x160/0x374 [] __device_attach+0x28/0x4c [] bus_for_each_drv+0x78/0xac [] device_attach+0x6c/0x9c [] bus_probe_device+0x28/0xa0 [] device_add+0x324/0x604 [] usb_set_configuration+0x660/0x6cc [] generic_probe+0x44/0x84 [] usb_probe_device+0x54/0x74 [] driver_probe_device+0x160/0x374 [] __device_attach+0x28/0x4c Deadlocks: If the hub gets disconnected early enough (i.e. before INIT2/INIT3 are finished and the init_work is still queued), the core may call hub_quiesce() after acquiring interface device locks and it will wait for the work to be cancelled synchronously. But if the work handler is already running in parallel, it may try to acquire the same interface device lock and this may result in deadlock. Fix both the issues by removing the call to cancel_delayed_work_sync(). CC: #4.4+ Fixes: e50293ef9775 ("USB: fix invalid memory access in hub_activate()") Reported-by: Manu Gautam Signed-off-by: Viresh Kumar Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index bee13517676f..3ccffac0f647 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1315,8 +1315,6 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) struct usb_device *hdev = hub->hdev; int i; - cancel_delayed_work_sync(&hub->init_work); - /* hub_wq and related activity won't re-trigger */ hub->quiescing = 1; -- cgit v1.2.3 From ca5cbc8b02f9b21cc8cd1ab36668763ec34f9ee8 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 5 Aug 2016 11:49:45 -0400 Subject: USB: hub: fix up early-exit pathway in hub_activate The early-exit pathway in hub_activate, added by commit e50293ef9775 ("USB: fix invalid memory access in hub_activate()") needs improvement. It duplicates code that is already present at the end of the subroutine, and it neglects to undo the effect of a usb_autopm_get_interface_no_resume() call. This patch fixes both problems by making the early-exit pathway jump directly to the end of the subroutine. It simplifies the code at the end by merging two conditionals that actually test the same condition although they appear different: If type < HUB_INIT3 then type must be either HUB_INIT2 or HUB_INIT, and it can't be HUB_INIT because in that case the subroutine would have exited earlier. Signed-off-by: Alan Stern CC: #4.4+ Reviewed-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 3ccffac0f647..bb69d262b6f9 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1055,11 +1055,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) device_lock(hub->intfdev); /* Was the hub disconnected while we were waiting? */ - if (hub->disconnected) { - device_unlock(hub->intfdev); - kref_put(&hub->kref, hub_release); - return; - } + if (hub->disconnected) + goto disconnected; if (type == HUB_INIT2) goto init2; goto init3; @@ -1281,12 +1278,12 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* Scan all ports that need attention */ kick_hub_wq(hub); - /* Allow autosuspend if it was suppressed */ - if (type <= HUB_INIT3) + if (type == HUB_INIT2 || type == HUB_INIT3) { + /* Allow autosuspend if it was suppressed */ + disconnected: usb_autopm_put_interface_async(to_usb_interface(hub->intfdev)); - - if (type == HUB_INIT2 || type == HUB_INIT3) device_unlock(hub->intfdev); + } kref_put(&hub->kref, hub_release); } -- cgit v1.2.3 From 07d316a22e119fa301fd7dba7f1e1adfd4f72c05 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 5 Aug 2016 11:51:30 -0400 Subject: USB: hub: change the locking in hub_activate The locking in hub_activate() is not adequate to provide full mutual exclusion with hub_quiesce(). The subroutine locks the hub's usb_interface, but the callers of hub_quiesce() (such as hub_pre_reset() and hub_event()) hold the lock to the hub's usb_device. This patch changes hub_activate() to make it acquire the same lock as those other routines. Signed-off-by: Alan Stern CC: #4.4+ Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index bb69d262b6f9..1d5fc32d06d0 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1052,7 +1052,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* Continue a partial initialization */ if (type == HUB_INIT2 || type == HUB_INIT3) { - device_lock(hub->intfdev); + device_lock(&hdev->dev); /* Was the hub disconnected while we were waiting? */ if (hub->disconnected) @@ -1259,7 +1259,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) queue_delayed_work(system_power_efficient_wq, &hub->init_work, msecs_to_jiffies(delay)); - device_unlock(hub->intfdev); + device_unlock(&hdev->dev); return; /* Continues at init3: below */ } else { msleep(delay); @@ -1282,7 +1282,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* Allow autosuspend if it was suppressed */ disconnected: usb_autopm_put_interface_async(to_usb_interface(hub->intfdev)); - device_unlock(hub->intfdev); + device_unlock(&hdev->dev); } kref_put(&hub->kref, hub_release); -- cgit v1.2.3 From 28324936f3d672bbf83472fece8f36a158a52276 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 26 Jul 2016 16:01:30 +0800 Subject: usb: misc: usbtest: usbtest_do_ioctl may return positive integer For case 14 and case 21, their correct return value is the number of bytes transferred, so it is a positive integer. But in usbtest_ioctl, it takes non-zero as false return value for usbtest_do_ioctl, so it will treat the correct test as wrong test, then the time on tests will be the minus value. Signed-off-by: Peter Chen Cc: stable Fixes: 18fc4ebdc705 ("usb: misc: usbtest: Remove timeval usage") Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbtest.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 6b978f04b8d7..5e3464e8d4e5 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -2602,7 +2602,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) ktime_get_ts64(&start); retval = usbtest_do_ioctl(intf, param_32); - if (retval) + if (retval < 0) goto free_mutex; ktime_get_ts64(&end); -- cgit v1.2.3 From 9c6256a5e707a9eb8b91962b550050b13aa75334 Mon Sep 17 00:00:00 2001 From: Xiao Han Date: Tue, 14 Jun 2016 16:22:54 +0200 Subject: usb: misc: ftdi-elan: Fix off-by-one memory corruptions This patch fixes fives off-by-one bugs in the ftdi-elan driver code. The bug can be triggered by plugging a USB adapter for CardBus 3G cards (model U132 manufactured by Elan Digital Systems, Ltd), causing a kernel panic. The fix was tested on Ubuntu 14.04.4 with 4.7.0-rc14.2.0-27-generic+ and 4.4.0-22-generic+ kernel. In the ftdi_elan_synchronize function, an off-by-one memory corruption occurs when packet_bytes is equal or bigger than m. After having read m bytes, that is bytes_read is equal to m, " ..\x00" is still copied to the stack variable causing an out bounds write of 4 bytes, which overwrites the stack canary and results in a kernel panic. This off-by-one requires physical access to the machine. It is not exploitable since we have no control on the overwritten data. Similar off-by-one bugs have been observed in 4 other functions: ftdi_elan_stuck_waiting, ftdi_elan_read, ftdi_elan_edset_output and ftdi_elan_flush_input_fifo. Reported-by: Alex Palesandro Signed-off-by: Xiao Han Tested-by: Paul Chaignon Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/ftdi-elan.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 52c27cab78c3..9b5b3b2281ca 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -665,7 +665,7 @@ static ssize_t ftdi_elan_read(struct file *file, char __user *buffer, { char data[30 *3 + 4]; char *d = data; - int m = (sizeof(data) - 1) / 3; + int m = (sizeof(data) - 1) / 3 - 1; int bytes_read = 0; int retry_on_empty = 10; int retry_on_timeout = 5; @@ -1684,7 +1684,7 @@ wait:if (ftdi->disconnected > 0) { int i = 0; char data[30 *3 + 4]; char *d = data; - int m = (sizeof(data) - 1) / 3; + int m = (sizeof(data) - 1) / 3 - 1; int l = 0; struct u132_target *target = &ftdi->target[ed]; struct u132_command *command = &ftdi->command[ @@ -1876,7 +1876,7 @@ more:{ if (packet_bytes > 2) { char diag[30 *3 + 4]; char *d = diag; - int m = (sizeof(diag) - 1) / 3; + int m = (sizeof(diag) - 1) / 3 - 1; char *b = ftdi->bulk_in_buffer; int bytes_read = 0; diag[0] = 0; @@ -2053,7 +2053,7 @@ static int ftdi_elan_synchronize(struct usb_ftdi *ftdi) if (packet_bytes > 2) { char diag[30 *3 + 4]; char *d = diag; - int m = (sizeof(diag) - 1) / 3; + int m = (sizeof(diag) - 1) / 3 - 1; char *b = ftdi->bulk_in_buffer; int bytes_read = 0; unsigned char c = 0; @@ -2155,7 +2155,7 @@ more:{ if (packet_bytes > 2) { char diag[30 *3 + 4]; char *d = diag; - int m = (sizeof(diag) - 1) / 3; + int m = (sizeof(diag) - 1) / 3 - 1; char *b = ftdi->bulk_in_buffer; int bytes_read = 0; diag[0] = 0; -- cgit v1.2.3 From 9a8a5dcf20eee254ce490f12d579ef80ee776eb6 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 9 Aug 2016 15:46:46 +0200 Subject: iommu/mediatek: Mark static functions in headers inline This was an oversight while merging these functions. Fix it. Cc: Honghui Zhang Fixes: 9ca340c98c0d ('iommu/mediatek: move the common struct into header file') Signed-off-by: Joerg Roedel --- drivers/iommu/mtk_iommu.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h index 9ed0a8462ccf..3dab13b4a211 100644 --- a/drivers/iommu/mtk_iommu.h +++ b/drivers/iommu/mtk_iommu.h @@ -55,19 +55,19 @@ struct mtk_iommu_data { bool enable_4GB; }; -static int compare_of(struct device *dev, void *data) +static inline int compare_of(struct device *dev, void *data) { return dev->of_node == data; } -static int mtk_iommu_bind(struct device *dev) +static inline int mtk_iommu_bind(struct device *dev) { struct mtk_iommu_data *data = dev_get_drvdata(dev); return component_bind_all(dev, &data->smi_imu); } -static void mtk_iommu_unbind(struct device *dev) +static inline void mtk_iommu_unbind(struct device *dev) { struct mtk_iommu_data *data = dev_get_drvdata(dev); -- cgit v1.2.3 From aed9d65ac3278d4febd8665bd7db59ef53e825fe Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 1 Aug 2016 15:25:56 -0400 Subject: USB: validate wMaxPacketValue entries in endpoint descriptors Erroneous or malicious endpoint descriptors may have non-zero bits in reserved positions, or out-of-bounds values. This patch helps prevent these from causing problems by bounds-checking the wMaxPacketValue entries in endpoint descriptors and capping the values at the maximum allowed. This issue was first discovered and tests were conducted by Jake Lamberson , an intern working for Rosie Hall. Signed-off-by: Alan Stern Reported-by: roswest Tested-by: roswest CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 66 ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 63 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 31ccdccd7a04..051163189810 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -171,6 +171,31 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, ep, buffer, size); } +static const unsigned short low_speed_maxpacket_maxes[4] = { + [USB_ENDPOINT_XFER_CONTROL] = 8, + [USB_ENDPOINT_XFER_ISOC] = 0, + [USB_ENDPOINT_XFER_BULK] = 0, + [USB_ENDPOINT_XFER_INT] = 8, +}; +static const unsigned short full_speed_maxpacket_maxes[4] = { + [USB_ENDPOINT_XFER_CONTROL] = 64, + [USB_ENDPOINT_XFER_ISOC] = 1023, + [USB_ENDPOINT_XFER_BULK] = 64, + [USB_ENDPOINT_XFER_INT] = 64, +}; +static const unsigned short high_speed_maxpacket_maxes[4] = { + [USB_ENDPOINT_XFER_CONTROL] = 64, + [USB_ENDPOINT_XFER_ISOC] = 1024, + [USB_ENDPOINT_XFER_BULK] = 512, + [USB_ENDPOINT_XFER_INT] = 1023, +}; +static const unsigned short super_speed_maxpacket_maxes[4] = { + [USB_ENDPOINT_XFER_CONTROL] = 512, + [USB_ENDPOINT_XFER_ISOC] = 1024, + [USB_ENDPOINT_XFER_BULK] = 1024, + [USB_ENDPOINT_XFER_INT] = 1024, +}; + static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, int asnum, struct usb_host_interface *ifp, int num_ep, unsigned char *buffer, int size) @@ -179,6 +204,8 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, struct usb_endpoint_descriptor *d; struct usb_host_endpoint *endpoint; int n, i, j, retval; + unsigned int maxp; + const unsigned short *maxpacket_maxes; d = (struct usb_endpoint_descriptor *) buffer; buffer += d->bLength; @@ -286,6 +313,42 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, endpoint->desc.wMaxPacketSize = cpu_to_le16(8); } + /* Validate the wMaxPacketSize field */ + maxp = usb_endpoint_maxp(&endpoint->desc); + + /* Find the highest legal maxpacket size for this endpoint */ + i = 0; /* additional transactions per microframe */ + switch (to_usb_device(ddev)->speed) { + case USB_SPEED_LOW: + maxpacket_maxes = low_speed_maxpacket_maxes; + break; + case USB_SPEED_FULL: + maxpacket_maxes = full_speed_maxpacket_maxes; + break; + case USB_SPEED_HIGH: + /* Bits 12..11 are allowed only for HS periodic endpoints */ + if (usb_endpoint_xfer_int(d) || usb_endpoint_xfer_isoc(d)) { + i = maxp & (BIT(12) | BIT(11)); + maxp &= ~i; + } + /* fallthrough */ + default: + maxpacket_maxes = high_speed_maxpacket_maxes; + break; + case USB_SPEED_SUPER: + case USB_SPEED_SUPER_PLUS: + maxpacket_maxes = super_speed_maxpacket_maxes; + break; + } + j = maxpacket_maxes[usb_endpoint_type(&endpoint->desc)]; + + if (maxp > j) { + dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid maxpacket %d, setting to %d\n", + cfgno, inum, asnum, d->bEndpointAddress, maxp, j); + maxp = j; + endpoint->desc.wMaxPacketSize = cpu_to_le16(i | maxp); + } + /* * Some buggy high speed devices have bulk endpoints using * maxpacket sizes other than 512. High speed HCDs may not @@ -293,9 +356,6 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, */ if (to_usb_device(ddev)->speed == USB_SPEED_HIGH && usb_endpoint_xfer_bulk(d)) { - unsigned maxp; - - maxp = usb_endpoint_maxp(&endpoint->desc) & 0x07ff; if (maxp != 512) dev_warn(ddev, "config %d interface %d altsetting %d " "bulk endpoint 0x%X has invalid maxpacket %d\n", -- cgit v1.2.3 From bc337b51508beb2d039aff5074a76cfe1c212030 Mon Sep 17 00:00:00 2001 From: Marc Ohlf Date: Wed, 3 Aug 2016 11:51:54 +0200 Subject: usb: ehci: change order of register cleanup during shutdown In ehci_turn_off_all_ports() all EHCI port registers are cleared to zero. On some hardware, this can lead to an system hang, when ehci_port_power() accesses the already cleared registers. This patch changes the order of cleanup. First call ehci_port_power() which respects the current bits in port status registers and afterwards cleanup the hard way by setting everything to zero. Signed-off-by: Marc Ohlf Acked-by: Alan Stern CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index a962b89b65a6..1e5f529d51a2 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -332,11 +332,11 @@ static void ehci_turn_off_all_ports(struct ehci_hcd *ehci) int port = HCS_N_PORTS(ehci->hcs_params); while (port--) { - ehci_writel(ehci, PORT_RWC_BITS, - &ehci->regs->port_status[port]); spin_unlock_irq(&ehci->lock); ehci_port_power(ehci, port, false); spin_lock_irq(&ehci->lock); + ehci_writel(ehci, PORT_RWC_BITS, + &ehci->regs->port_status[port]); } } -- cgit v1.2.3 From 70f7ca9a0262784d0b80727860a63d64ab228e7b Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 15 Jun 2016 15:56:11 +0200 Subject: usb: devio, do not warn when allocation fails usbdev_mmap allocates a buffer. The size of the buffer is determined by a user. So with this code (no need to be root): int fd = open("/dev/bus/usb/001/001", O_RDONLY); mmap(NULL, 0x800000, PROT_READ, MAP_SHARED, fd, 0); we can see a warning: WARNING: CPU: 0 PID: 21771 at ../mm/page_alloc.c:3563 __alloc_pages_slowpath+0x1036/0x16e0() ... Call Trace: [] ? warn_slowpath_null+0x2e/0x40 [] ? __alloc_pages_slowpath+0x1036/0x16e0 [] ? warn_alloc_failed+0x250/0x250 [] ? get_page_from_freelist+0x75b/0x28b0 [] ? __alloc_pages_nodemask+0x583/0x6b0 [] ? __alloc_pages_slowpath+0x16e0/0x16e0 [] ? dma_generic_alloc_coherent+0x104/0x220 [] ? hcd_buffer_alloc+0x1d6/0x3e0 [usbcore] [] ? hcd_buffer_destroy+0xa0/0xa0 [usbcore] [] ? usb_alloc_coherent+0x65/0x90 [usbcore] [] ? usbdev_mmap+0x1a5/0x770 [usbcore] ... Allocations like this one should be marked as __GFP_NOWARN. So do so. The size could be also clipped by something like: if (size >= (1 << (MAX_ORDER + PAGE_SHIFT - 1))) return -ENOMEM; But I think the overall limit of 16M (by usbfs_increase_memory_usage) is enough, so that we only silence the warning here. Signed-off-by: Jiri Slaby Cc: Greg Kroah-Hartman Cc: Alan Stern Cc: Steinar H. Gunderson Cc: Markus Rechberger Fixes: f7d34b445a (USB: Add support for usbfs zerocopy.) Cc: 4.6+ Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index e9f5043a2167..472cbcdf7456 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -241,7 +241,8 @@ static int usbdev_mmap(struct file *file, struct vm_area_struct *vma) goto error_decrease_mem; } - mem = usb_alloc_coherent(ps->dev, size, GFP_USER, &dma_handle); + mem = usb_alloc_coherent(ps->dev, size, GFP_USER | __GFP_NOWARN, + &dma_handle); if (!mem) { ret = -ENOMEM; goto error_free_usbm; -- cgit v1.2.3 From 5cce438298a0d2a7a857a4a3c3e26aeb8f77b941 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 10 Jun 2016 14:42:55 -0400 Subject: USB: remove race condition in usbfs/libusb when using reap-after-disconnect Hans de Goede has reported a difficulty in the Linux port of libusb. When a device is removed, the poll() system call in usbfs starts returning POLLERR as soon as udev->state is set to USB_STATE_NOTATTACHED, but the outstanding URBs are not available for reaping until some time later (after usbdev_remove() has been called). This is awkward for libusb or other usbfs clients, although not an insuperable problem. At any rate, it's easy to change usbfs so that it returns POLLHUP as soon as the state becomes USB_STATE_NOTATTACHED but it doesn't return POLLERR until after the outstanding URBs have completed. That's what this patch does; it uses the fact that ps->list is always on the dev->filelist list until usbdev_remove() takes it off, which happens after all the outstanding URBs have been cancelled. Signed-off-by: Alan Stern Reported-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 472cbcdf7456..e6a6d67c8705 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -2583,7 +2583,9 @@ static unsigned int usbdev_poll(struct file *file, if (file->f_mode & FMODE_WRITE && !list_empty(&ps->async_completed)) mask |= POLLOUT | POLLWRNORM; if (!connected(ps)) - mask |= POLLERR | POLLHUP; + mask |= POLLHUP; + if (list_empty(&ps->list)) + mask |= POLLERR; return mask; } -- cgit v1.2.3 From 59b71f774fc2ec2d985251e72fde0f9f88164547 Mon Sep 17 00:00:00 2001 From: Jaewon Kim Date: Thu, 21 Jul 2016 22:20:53 +0900 Subject: usb: host: max3421-hcd: fix mask of IO control register GPIO control register is divided into IOPINS1 and IOPINS2. And low 4-bit of register is controls output. So, this patch fixes wrong mask of GPIO output. Signed-off-by: Jaewon Kim Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/max3421-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c index c369c29e496d..2f7690092a7f 100644 --- a/drivers/usb/host/max3421-hcd.c +++ b/drivers/usb/host/max3421-hcd.c @@ -1675,7 +1675,7 @@ max3421_gpout_set_value(struct usb_hcd *hcd, u8 pin_number, u8 value) if (pin_number > 7) return; - mask = 1u << pin_number; + mask = 1u << (pin_number % 4); idx = pin_number / 4; if (value) -- cgit v1.2.3 From fd837b08d98c0c9f4f31998f2ed55b9d8694082c Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Mon, 8 Aug 2016 17:29:28 +0100 Subject: KVM: arm64: ITS: return 1 on successful MSI injection According to the KVM API documentation a successful MSI injection should return a value > 0 on success. Return possible errors in vgic_its_trigger_msi() and report a successful injection back to userland, while also reporting the case where the MSI could not be delivered due to the guest not having the LPI mapped, for instance. Signed-off-by: Andre Przywara Reviewed-by: Eric Auger Reviewed-by: Christoffer Dall Signed-off-by: Christoffer Dall --- include/linux/irqchip/arm-gic-v3.h | 1 + virt/kvm/arm/vgic/vgic-its.c | 56 +++++++++++++++++++++++++------------- 2 files changed, 38 insertions(+), 19 deletions(-) diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h index 56b0b7ec66aa..99ac022edc60 100644 --- a/include/linux/irqchip/arm-gic-v3.h +++ b/include/linux/irqchip/arm-gic-v3.h @@ -337,6 +337,7 @@ */ #define E_ITS_MOVI_UNMAPPED_INTERRUPT 0x010107 #define E_ITS_MOVI_UNMAPPED_COLLECTION 0x010109 +#define E_ITS_INT_UNMAPPED_INTERRUPT 0x010307 #define E_ITS_CLEAR_UNMAPPED_INTERRUPT 0x010507 #define E_ITS_MAPD_DEVICE_OOR 0x010801 #define E_ITS_MAPC_PROCNUM_OOR 0x010902 diff --git a/virt/kvm/arm/vgic/vgic-its.c b/virt/kvm/arm/vgic/vgic-its.c index 07411cf967b9..1bd8adbeae26 100644 --- a/virt/kvm/arm/vgic/vgic-its.c +++ b/virt/kvm/arm/vgic/vgic-its.c @@ -441,39 +441,48 @@ static unsigned long vgic_mmio_read_its_idregs(struct kvm *kvm, * Find the target VCPU and the LPI number for a given devid/eventid pair * and make this IRQ pending, possibly injecting it. * Must be called with the its_lock mutex held. + * Returns 0 on success, a positive error value for any ITS mapping + * related errors and negative error values for generic errors. */ -static void vgic_its_trigger_msi(struct kvm *kvm, struct vgic_its *its, - u32 devid, u32 eventid) +static int vgic_its_trigger_msi(struct kvm *kvm, struct vgic_its *its, + u32 devid, u32 eventid) { + struct kvm_vcpu *vcpu; struct its_itte *itte; if (!its->enabled) - return; + return -EBUSY; itte = find_itte(its, devid, eventid); - /* Triggering an unmapped IRQ gets silently dropped. */ - if (itte && its_is_collection_mapped(itte->collection)) { - struct kvm_vcpu *vcpu; - - vcpu = kvm_get_vcpu(kvm, itte->collection->target_addr); - if (vcpu && vcpu->arch.vgic_cpu.lpis_enabled) { - spin_lock(&itte->irq->irq_lock); - itte->irq->pending = true; - vgic_queue_irq_unlock(kvm, itte->irq); - } - } + if (!itte || !its_is_collection_mapped(itte->collection)) + return E_ITS_INT_UNMAPPED_INTERRUPT; + + vcpu = kvm_get_vcpu(kvm, itte->collection->target_addr); + if (!vcpu) + return E_ITS_INT_UNMAPPED_INTERRUPT; + + if (!vcpu->arch.vgic_cpu.lpis_enabled) + return -EBUSY; + + spin_lock(&itte->irq->irq_lock); + itte->irq->pending = true; + vgic_queue_irq_unlock(kvm, itte->irq); + + return 0; } /* * Queries the KVM IO bus framework to get the ITS pointer from the given * doorbell address. * We then call vgic_its_trigger_msi() with the decoded data. + * According to the KVM_SIGNAL_MSI API description returns 1 on success. */ int vgic_its_inject_msi(struct kvm *kvm, struct kvm_msi *msi) { u64 address; struct kvm_io_device *kvm_io_dev; struct vgic_io_device *iodev; + int ret; if (!vgic_has_its(kvm)) return -ENODEV; @@ -490,10 +499,21 @@ int vgic_its_inject_msi(struct kvm *kvm, struct kvm_msi *msi) iodev = container_of(kvm_io_dev, struct vgic_io_device, dev); mutex_lock(&iodev->its->its_lock); - vgic_its_trigger_msi(kvm, iodev->its, msi->devid, msi->data); + ret = vgic_its_trigger_msi(kvm, iodev->its, msi->devid, msi->data); mutex_unlock(&iodev->its->its_lock); - return 0; + if (ret < 0) + return ret; + + /* + * KVM_SIGNAL_MSI demands a return value > 0 for success and 0 + * if the guest has blocked the MSI. So we map any LPI mapping + * related error to that. + */ + if (ret) + return 0; + else + return 1; } /* Requires the its_lock to be held. */ @@ -981,9 +1001,7 @@ static int vgic_its_cmd_handle_int(struct kvm *kvm, struct vgic_its *its, u32 msi_data = its_cmd_get_id(its_cmd); u64 msi_devid = its_cmd_get_deviceid(its_cmd); - vgic_its_trigger_msi(kvm, its, msi_devid, msi_data); - - return 0; + return vgic_its_trigger_msi(kvm, its, msi_devid, msi_data); } /* -- cgit v1.2.3 From 3ec60043f7c02e1f79e4a90045ff2d2e80042941 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Tue, 9 Aug 2016 16:23:17 +0100 Subject: iommu/dma: Don't put uninitialised IOVA domains Due to the limitations of having to wait until we see a device's DMA restrictions before we know how we want an IOVA domain initialised, there is a window for error if a DMA ops domain is allocated but later freed without ever being used. In that case, init_iova_domain() was never called, so calling put_iova_domain() from iommu_put_dma_cookie() ends up trying to take an uninitialised lock and crashing. Make things robust by skipping the call unless the IOVA domain actually has been initialised, as we probably should have done from the start. Fixes: 0db2e5d18f76 ("iommu: Implement common IOMMU ops for DMA mapping") Cc: stable@vger.kernel.org Reported-by: Nate Watterson Reviewed-by: Nate Watterson Tested-by: Nate Watterson Reviewed-by: Eric Auger Tested-by: Eric Auger Signed-off-by: Robin Murphy Signed-off-by: Joerg Roedel --- drivers/iommu/dma-iommu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c index 08a1e2f3690f..7d991c81c4fa 100644 --- a/drivers/iommu/dma-iommu.c +++ b/drivers/iommu/dma-iommu.c @@ -68,7 +68,8 @@ void iommu_put_dma_cookie(struct iommu_domain *domain) if (!iovad) return; - put_iova_domain(iovad); + if (iovad->granule) + put_iova_domain(iovad); kfree(iovad); domain->iova_cookie = NULL; } -- cgit v1.2.3 From 17b963e319449f709e78dc1ef445d797a13eecbc Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 8 Aug 2016 13:06:41 +0100 Subject: rxrpc: Need to flag call as being released on connect failure If rxrpc_new_client_call() fails to make a connection, the call record that it allocated needs to be marked as RXRPC_CALL_RELEASED before it is passed to rxrpc_put_call() to indicate that it no longer has any attachment to the AF_RXRPC socket. Without this, an assertion failure may occur at: net/rxrpc/call_object:635 Signed-off-by: David Howells --- net/rxrpc/call_object.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/rxrpc/call_object.c b/net/rxrpc/call_object.c index e8c953c48cb8..ae057e0740f3 100644 --- a/net/rxrpc/call_object.c +++ b/net/rxrpc/call_object.c @@ -275,6 +275,7 @@ error: list_del_init(&call->link); write_unlock_bh(&rxrpc_call_lock); + set_bit(RXRPC_CALL_RELEASED, &call->flags); call->state = RXRPC_CALL_DEAD; rxrpc_put_call(call); _leave(" = %d", ret); @@ -287,6 +288,7 @@ error: */ found_user_ID_now_present: write_unlock(&rx->call_lock); + set_bit(RXRPC_CALL_RELEASED, &call->flags); call->state = RXRPC_CALL_DEAD; rxrpc_put_call(call); _leave(" = -EEXIST [%p]", call); -- cgit v1.2.3 From f9dc575725baeaad8eb5262589f9aebeeaf13433 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 8 Aug 2016 10:27:26 +0100 Subject: rxrpc: Don't access connection from call if pointer is NULL The call state machine processor sets up the message parameters for a UDP message that it might need to transmit in advance on the basis that there's a very good chance it's going to have to transmit either an ACK or an ABORT. This requires it to look in the connection struct to retrieve some of the parameters. However, if the call is complete, the call connection pointer may be NULL to dissuade the processor from transmitting a message. However, there are some situations where the processor is still going to be called - and it's still going to set up message parameters whether it needs them or not. This results in a NULL pointer dereference at: net/rxrpc/call_event.c:837 To fix this, skip the message pre-initialisation if there's no connection attached. Signed-off-by: David Howells --- net/rxrpc/call_event.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/rxrpc/call_event.c b/net/rxrpc/call_event.c index f5e99163a09e..e60cf65c2232 100644 --- a/net/rxrpc/call_event.c +++ b/net/rxrpc/call_event.c @@ -837,6 +837,9 @@ void rxrpc_process_call(struct work_struct *work) return; } + if (!call->conn) + goto skip_msg_init; + /* there's a good chance we're going to have to send a message, so set * one up in advance */ msg.msg_name = &call->conn->params.peer->srx.transport; @@ -859,6 +862,7 @@ void rxrpc_process_call(struct work_struct *work) memset(iov, 0, sizeof(iov)); iov[0].iov_base = &whdr; iov[0].iov_len = sizeof(whdr); +skip_msg_init: /* deal with events of a final nature */ if (test_bit(RXRPC_CALL_EV_RCVD_ERROR, &call->events)) { -- cgit v1.2.3 From 2e7e9758b2b680fa615d5cf70b7af416e96162d2 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 9 Aug 2016 10:11:48 +0100 Subject: rxrpc: Once packet posted in data_ready, don't retry posting Once a packet has been posted to a connection in the data_ready handler, we mustn't try reposting if we then find that the connection is dying as the refcount has been given over to the dying connection and the packet might no longer exist. Losing the packet isn't a problem as the peer will retransmit. Signed-off-by: David Howells --- net/rxrpc/input.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c index 9e0f58edcd01..04afdc09557b 100644 --- a/net/rxrpc/input.c +++ b/net/rxrpc/input.c @@ -567,13 +567,13 @@ done: * post connection-level events to the connection * - this includes challenges, responses and some aborts */ -static bool rxrpc_post_packet_to_conn(struct rxrpc_connection *conn, +static void rxrpc_post_packet_to_conn(struct rxrpc_connection *conn, struct sk_buff *skb) { _enter("%p,%p", conn, skb); skb_queue_tail(&conn->rx_queue, skb); - return rxrpc_queue_conn(conn); + rxrpc_queue_conn(conn); } /* @@ -694,7 +694,6 @@ void rxrpc_data_ready(struct sock *sk) rcu_read_lock(); -retry_find_conn: conn = rxrpc_find_connection_rcu(local, skb); if (!conn) goto cant_route_call; @@ -702,8 +701,7 @@ retry_find_conn: if (sp->hdr.callNumber == 0) { /* Connection-level packet */ _debug("CONN %p {%d}", conn, conn->debug_id); - if (!rxrpc_post_packet_to_conn(conn, skb)) - goto retry_find_conn; + rxrpc_post_packet_to_conn(conn, skb); } else { /* Call-bound packets are routed by connection channel. */ unsigned int channel = sp->hdr.cid & RXRPC_CHANNELMASK; -- cgit v1.2.3 From 50fd85a1f94753b86a7f540794dfd4f799e81ac2 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 9 Aug 2016 11:30:43 +0100 Subject: rxrpc: Fix a use-after-push in data_ready handler Fix a use of a packet after it has been enqueued onto the packet processing queue in the data_ready handler. Once on a call's Rx queue, we mustn't touch it any more as it may be dequeued and freed by the call processor running on a work queue. Save the values we need before enqueuing. Without this, we can get an oops like the following: BUG: unable to handle kernel NULL pointer dereference at 000000000000009c IP: [] rxrpc_fast_process_packet+0x724/0xa11 [af_rxrpc] PGD 0 Oops: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G E 4.7.0-fsdevel+ #1336 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 task: ffff88040d6863c0 task.stack: ffff88040d68c000 RIP: 0010:[] [] rxrpc_fast_process_packet+0x724/0xa11 [af_rxrpc] RSP: 0018:ffff88041fb03a78 EFLAGS: 00010246 RAX: ffffffffffffffff RBX: ffff8803ff195b00 RCX: 0000000000000001 RDX: ffffffffa01854d1 RSI: 0000000000000008 RDI: ffff8803ff195b00 RBP: ffff88041fb03ab0 R08: 0000000000000000 R09: 0000000000000001 R10: ffff88041fb038c8 R11: 0000000000000000 R12: ffff880406874800 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88041fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000009c CR3: 0000000001c14000 CR4: 00000000001406e0 Stack: ffff8803ff195ea0 ffff880408348800 ffff880406874800 ffff8803ff195b00 ffff880408348800 ffff8803ff195ed8 0000000000000000 ffff88041fb03af0 ffffffffa0186072 0000000000000000 ffff8804054da000 0000000000000000 Call Trace: [] rxrpc_data_ready+0x89d/0xbae [af_rxrpc] [] __sock_queue_rcv_skb+0x24c/0x2b2 [] __udp_queue_rcv_skb+0x4b/0x1bd [] udp_queue_rcv_skb+0x281/0x4db [] __udp4_lib_rcv+0x7ed/0x963 [] udp_rcv+0x15/0x17 [] ip_local_deliver_finish+0x1c3/0x318 [] ip_local_deliver+0xbb/0xc4 [] ? inet_del_offload+0x40/0x40 [] ip_rcv_finish+0x3ce/0x42c [] ip_rcv+0x304/0x33d [] ? ip_local_deliver_finish+0x318/0x318 [] __netif_receive_skb_core+0x601/0x6e8 [] __netif_receive_skb+0x13/0x54 [] netif_receive_skb_internal+0xbb/0x17c [] napi_gro_receive+0xf9/0x1bd [] rtl8169_poll+0x32b/0x4a8 [] net_rx_action+0xe8/0x357 [] __do_softirq+0x1aa/0x414 [] irq_exit+0x3d/0xb0 [] do_IRQ+0xe4/0xfc [] common_interrupt+0x93/0x93 [] ? cpuidle_enter_state+0x1ad/0x2be [] ? cpuidle_enter_state+0x1a8/0x2be [] cpuidle_enter+0x12/0x14 [] call_cpuidle+0x39/0x3b [] cpu_startup_entry+0x230/0x35d [] start_secondary+0xf4/0xf7 Signed-off-by: David Howells --- net/rxrpc/input.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c index 04afdc09557b..789719031462 100644 --- a/net/rxrpc/input.c +++ b/net/rxrpc/input.c @@ -124,11 +124,15 @@ static int rxrpc_fast_process_data(struct rxrpc_call *call, struct rxrpc_skb_priv *sp; bool terminal; int ret, ackbit, ack; + u32 serial; + u8 flags; _enter("{%u,%u},,{%u}", call->rx_data_post, call->rx_first_oos, seq); sp = rxrpc_skb(skb); ASSERTCMP(sp->call, ==, NULL); + flags = sp->hdr.flags; + serial = sp->hdr.serial; spin_lock(&call->lock); @@ -192,8 +196,8 @@ static int rxrpc_fast_process_data(struct rxrpc_call *call, sp->call = call; rxrpc_get_call(call); atomic_inc(&call->skb_count); - terminal = ((sp->hdr.flags & RXRPC_LAST_PACKET) && - !(sp->hdr.flags & RXRPC_CLIENT_INITIATED)); + terminal = ((flags & RXRPC_LAST_PACKET) && + !(flags & RXRPC_CLIENT_INITIATED)); ret = rxrpc_queue_rcv_skb(call, skb, false, terminal); if (ret < 0) { if (ret == -ENOMEM || ret == -ENOBUFS) { @@ -205,12 +209,13 @@ static int rxrpc_fast_process_data(struct rxrpc_call *call, } skb = NULL; + sp = NULL; _debug("post #%u", seq); ASSERTCMP(call->rx_data_post, ==, seq); call->rx_data_post++; - if (sp->hdr.flags & RXRPC_LAST_PACKET) + if (flags & RXRPC_LAST_PACKET) set_bit(RXRPC_CALL_RCVD_LAST, &call->flags); /* if we've reached an out of sequence packet then we need to drain @@ -226,7 +231,7 @@ static int rxrpc_fast_process_data(struct rxrpc_call *call, spin_unlock(&call->lock); atomic_inc(&call->ackr_not_idle); - rxrpc_propose_ACK(call, RXRPC_ACK_DELAY, sp->hdr.serial, false); + rxrpc_propose_ACK(call, RXRPC_ACK_DELAY, serial, false); _leave(" = 0 [posted]"); return 0; @@ -239,7 +244,7 @@ out: discard_and_ack: _debug("discard and ACK packet %p", skb); - __rxrpc_propose_ACK(call, ack, sp->hdr.serial, true); + __rxrpc_propose_ACK(call, ack, serial, true); discard: spin_unlock(&call->lock); rxrpc_free_skb(skb); @@ -247,7 +252,7 @@ discard: return 0; enqueue_and_ack: - __rxrpc_propose_ACK(call, ack, sp->hdr.serial, true); + __rxrpc_propose_ACK(call, ack, serial, true); enqueue_packet: _net("defer skb %p", skb); spin_unlock(&call->lock); -- cgit v1.2.3 From 992c273af9d9f12a2e470731f69bb3baa694562b Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 9 Aug 2016 16:58:42 +0100 Subject: rxrpc: Free packets discarded in data_ready Under certain conditions, the data_ready handler will discard a packet. These need to be freed. Signed-off-by: David Howells --- net/rxrpc/input.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c index 789719031462..70bb77818dea 100644 --- a/net/rxrpc/input.c +++ b/net/rxrpc/input.c @@ -744,6 +744,8 @@ cant_route_call: if (sp->hdr.type != RXRPC_PACKET_TYPE_ABORT) { _debug("reject type %d",sp->hdr.type); rxrpc_reject_packet(local, skb); + } else { + rxrpc_free_skb(skb); } _leave(" [no call]"); return; -- cgit v1.2.3 From 8b078c603249239f597dc395ac182667c8e0af9c Mon Sep 17 00:00:00 2001 From: Mathias Koehrer Date: Tue, 9 Aug 2016 10:33:31 +0200 Subject: PCI: Update "pci=resource_alignment" documentation Some uio based PCI drivers, e.g., uio_cif, do not work if the assigned PCI memory resources are not page aligned. By using the kernel option "pci=resource_alignment=@:." it is possible to request page alignment for memory resources of devices. However, this is cumbersome when using several devices, and the bus/slot/func addresses may change if devices are added to or removed from the system. Extend the "pci=resource_alignment" option so we can specify the relevant devices via PCI vendor, device, subvendor, and subdevice IDs. The specification of the devices via IDs is indicated by a leading string "pci:" as argument to "pci=resource_alignment". The format of the specification is pci::[::] Examples: pci=resource_alignment=4096@pci:8086:9c22:103c:198f pci=resource_alignment=pci:8086:9c22 # defaults to PAGE_SIZE align [bhelgaas: changelog, use actual vendor/device IDs in examples] Signed-off-by: Mathias Koehrer Signed-off-by: Bjorn Helgaas --- Documentation/kernel-parameters.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 46c030a49186..a4f4d693e2c1 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3032,6 +3032,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. PAGE_SIZE is used as alignment. PCI-PCI bridge can be specified, if resource windows need to be expanded. + To specify the alignment for several + instances of a device, the PCI vendor, + device, subvendor, and subdevice may be + specified, e.g., 4096@pci:8086:9c22:103c:198f ecrc= Enable/disable PCIe ECRC (transaction layer end-to-end CRC checking). bios: Use BIOS/firmware settings. This is the -- cgit v1.2.3 From beab47d55b883e85bec7771a899ac791c6f92c80 Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Tue, 19 Jul 2016 22:42:22 +0200 Subject: of: Delete an unnecessary check before the function call "of_node_put" The of_node_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Signed-off-by: Rob Herring --- drivers/of/base.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/of/base.c b/drivers/of/base.c index 7792266db259..cb255a07baa0 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -1631,8 +1631,7 @@ static int __of_parse_phandle_with_args(const struct device_node *np, */ err: - if (it.node) - of_node_put(it.node); + of_node_put(it.node); return rc; } -- cgit v1.2.3 From 89c67752ae4dedc1244344b266c837ddb4053ebd Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Mon, 1 Aug 2016 17:17:53 +1000 Subject: drivers/of: Validate device node in __unflatten_device_tree() @mynodes is set to NULL when __unflatten_device_tree() is called to unflatten device sub-tree in PCI hot add scenario on PowerPC PowerNV platform. Marking @mynodes detached unconditionally causes kernel crash as below backtrace shows: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc000000000b26f64 cpu 0x0: Vector: 300 (Data Access) at [c000003fcc7cf740] pc: c000000000b26f64: __unflatten_device_tree+0xf4/0x190 lr: c000000000b26f40: __unflatten_device_tree+0xd0/0x190 sp: c000003fcc7cf9c0 msr: 900000000280b033 dar: 0 dsisr: 40000000 current = 0xc000003fcc281680 paca = 0xc00000000ff00000 softe: 0 irq_happened: 0x01 pid = 2724, comm = sh Linux version 4.7.0-gavin-07754-g92a6836 (gwshan@gwshan) (gcc version \ 4.9.3 (Buildroot 2016.02-rc2-00093-g5ea3bce) ) #539 SMP Mon Aug 1 \ 12:40:29 AEST 2016 enter ? for help [c000003fcc7cfa50] c000000000b27060 of_fdt_unflatten_tree+0x60/0x90 [c000003fcc7cfaa0] c0000000004c6288 pnv_php_set_slot_power_state+0x118/0x440 [c000003fcc7cfb80] c0000000004c6a10 pnv_php_enable+0xc0/0x170 [c000003fcc7cfbd0] c0000000004c4d80 power_write_file+0xa0/0x190 [c000003fcc7cfc50] c0000000004be93c pci_slot_attr_store+0x3c/0x60 [c000003fcc7cfc70] c0000000002d3fd4 sysfs_kf_write+0x94/0xc0 [c000003fcc7cfcb0] c0000000002d2c30 kernfs_fop_write+0x180/0x260 [c000003fcc7cfd00] c000000000230fe0 __vfs_write+0x40/0x190 [c000003fcc7cfd90] c000000000232278 vfs_write+0xc8/0x240 [c000003fcc7cfde0] c000000000233d90 SyS_write+0x60/0x110 [c000003fcc7cfe30] c000000000009524 system_call+0x38/0x108 This avoids the kernel crash by marking @mynodes detached only when @mynodes is dereferencing valid device node in __unflatten_device_tree(). Fixes: 1d1bde550ea3 ("of: fdt: mark unflattened tree as detached") Reported-by: Meng Li Signed-off-by: Gavin Shan Signed-off-by: Rob Herring --- drivers/of/fdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index 55f1b8391149..085c6389afd1 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -517,7 +517,7 @@ static void *__unflatten_device_tree(const void *blob, pr_warning("End of tree marker overwritten: %08x\n", be32_to_cpup(mem + size)); - if (detached) { + if (detached && mynodes) { of_node_set_flag(*mynodes, OF_DETACHED); pr_debug("unflattened tree is detached\n"); } -- cgit v1.2.3 From e55aeb6ba4e8cc3549bff1e75ea1d029324bce21 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 9 Aug 2016 16:18:51 +0200 Subject: of/irq: Mark interrupt controllers as populated before initialisation That way the init callback may clear the flag again, in case of drivers split between early irq chip and a normal platform driver. Fixes: 15cc2ed6dcf9 ("of/irq: Mark initialised interrupt controllers as populated") Suggested-by: Rob Herring Signed-off-by: Philipp Zabel Acked-by: Jon Hunter Signed-off-by: Rob Herring --- drivers/of/irq.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 89a71c6074fc..a2e68f740eda 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -544,12 +544,15 @@ void __init of_irq_init(const struct of_device_id *matches) list_del(&desc->list); + of_node_set_flag(desc->dev, OF_POPULATED); + pr_debug("of_irq_init: init %s (%p), parent %p\n", desc->dev->full_name, desc->dev, desc->interrupt_parent); ret = desc->irq_init_cb(desc->dev, desc->interrupt_parent); if (ret) { + of_node_clear_flag(desc->dev, OF_POPULATED); kfree(desc); continue; } @@ -559,8 +562,6 @@ void __init of_irq_init(const struct of_device_id *matches) * its children can get processed in a subsequent pass. */ list_add_tail(&desc->list, &intc_parent_list); - - of_node_set_flag(desc->dev, OF_POPULATED); } /* Get the next pending parent that might have children */ -- cgit v1.2.3 From 255c0397bc402e3fcc8833c214f49b2108f04d1a Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 9 Aug 2016 16:18:52 +0200 Subject: ARM: imx6: mark GPC node as not populated after irq init to probe pm domain driver Since IRQCHIP_DECLARE now flags the GPC node as already populated, the GPC power domain driver is never probed unless we clear the flag again. Fixes: 15cc2ed6dcf9 ("of/irq: Mark initialised interrupt controllers as populated") Suggested-by: Rob Herring Signed-off-by: Philipp Zabel Cc: Jon Hunter Signed-off-by: Rob Herring --- arch/arm/mach-imx/gpc.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index fd8720532471..0df062d8b2c9 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -271,6 +271,12 @@ static int __init imx_gpc_init(struct device_node *node, for (i = 0; i < IMR_NUM; i++) writel_relaxed(~0, gpc_base + GPC_IMR1 + i * 4); + /* + * Clear the OF_POPULATED flag set in of_irq_init so that + * later the GPC power domain driver will not be skipped. + */ + of_node_clear_flag(node, OF_POPULATED); + return 0; } IRQCHIP_DECLARE(imx_gpc, "fsl,imx6q-gpc", imx_gpc_init); -- cgit v1.2.3 From a5d0dc810abf3d6b241777467ee1d6efb02575fc Mon Sep 17 00:00:00 2001 From: Lance Richardson Date: Tue, 9 Aug 2016 15:29:42 -0400 Subject: vti: flush x-netns xfrm cache when vti interface is removed When executing the script included below, the netns delete operation hangs with the following message (repeated at 10 second intervals): kernel:unregister_netdevice: waiting for lo to become free. Usage count = 1 This occurs because a reference to the lo interface in the "secure" netns is still held by a dst entry in the xfrm bundle cache in the init netns. Address this problem by garbage collecting the tunnel netns flow cache when a cross-namespace vti interface receives a NETDEV_DOWN notification. A more detailed description of the problem scenario (referencing commands in the script below): (1) ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 The vti_test interface is created in the init namespace. vti_tunnel_init() attaches a struct ip_tunnel to the vti interface's netdev_priv(dev), setting the tunnel net to &init_net. (2) ip link set vti_test netns secure The vti_test interface is moved to the "secure" netns. Note that the associated struct ip_tunnel still has tunnel->net set to &init_net. (3) ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 The first packet sent using the vti device causes xfrm_lookup() to be called as follows: dst = xfrm_lookup(tunnel->net, skb_dst(skb), fl, NULL, 0); Note that tunnel->net is the init namespace, while skb_dst(skb) references the vti_test interface in the "secure" namespace. The returned dst references an interface in the init namespace. Also note that the first parameter to xfrm_lookup() determines which flow cache is used to store the computed xfrm bundle, so after xfrm_lookup() returns there will be a cached bundle in the init namespace flow cache with a dst referencing a device in the "secure" namespace. (4) ip netns del secure Kernel begins to delete the "secure" namespace. At some point the vti_test interface is deleted, at which point dst_ifdown() changes the dst->dev in the cached xfrm bundle flow from vti_test to lo (still in the "secure" namespace however). Since nothing has happened to cause the init namespace's flow cache to be garbage collected, this dst remains attached to the flow cache, so the kernel loops waiting for the last reference to lo to go away. ip link add br1 type bridge ip link set dev br1 up ip addr add dev br1 1.1.1.1/8 ip netns add secure ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 ip link set vti_test netns secure ip netns exec secure ip link set vti_test up ip netns exec secure ip link s lo up ip netns exec secure ip addr add dev lo 192.168.100.1/24 ip netns exec secure ip route add 192.168.200.0/24 dev vti_test ip xfrm policy flush ip xfrm state flush ip xfrm policy add dir out tmpl src 1.1.1.1 dst 1.1.1.2 \ proto esp mode tunnel mark 1 ip xfrm policy add dir in tmpl src 1.1.1.2 dst 1.1.1.1 \ proto esp mode tunnel mark 1 ip xfrm state add src 1.1.1.1 dst 1.1.1.2 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip xfrm state add src 1.1.1.2 dst 1.1.1.1 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 ip netns del secure Reported-by: Hangbin Liu Reported-by: Jan Tluka Signed-off-by: Lance Richardson Signed-off-by: David S. Miller --- net/ipv4/ip_vti.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c index a917903d5e97..cc701fa70b12 100644 --- a/net/ipv4/ip_vti.c +++ b/net/ipv4/ip_vti.c @@ -557,6 +557,33 @@ static struct rtnl_link_ops vti_link_ops __read_mostly = { .get_link_net = ip_tunnel_get_link_net, }; +static bool is_vti_tunnel(const struct net_device *dev) +{ + return dev->netdev_ops == &vti_netdev_ops; +} + +static int vti_device_event(struct notifier_block *unused, + unsigned long event, void *ptr) +{ + struct net_device *dev = netdev_notifier_info_to_dev(ptr); + struct ip_tunnel *tunnel = netdev_priv(dev); + + if (!is_vti_tunnel(dev)) + return NOTIFY_DONE; + + switch (event) { + case NETDEV_DOWN: + if (!net_eq(tunnel->net, dev_net(dev))) + xfrm_garbage_collect(tunnel->net); + break; + } + return NOTIFY_DONE; +} + +static struct notifier_block vti_notifier_block __read_mostly = { + .notifier_call = vti_device_event, +}; + static int __init vti_init(void) { const char *msg; @@ -564,6 +591,8 @@ static int __init vti_init(void) pr_info("IPv4 over IPsec tunneling driver\n"); + register_netdevice_notifier(&vti_notifier_block); + msg = "tunnel device"; err = register_pernet_device(&vti_net_ops); if (err < 0) @@ -596,6 +625,7 @@ xfrm_proto_ah_failed: xfrm_proto_esp_failed: unregister_pernet_device(&vti_net_ops); pernet_dev_failed: + unregister_netdevice_notifier(&vti_notifier_block); pr_err("vti init: failed to register %s\n", msg); return err; } @@ -607,6 +637,7 @@ static void __exit vti_fini(void) xfrm4_protocol_deregister(&vti_ah4_protocol, IPPROTO_AH); xfrm4_protocol_deregister(&vti_esp4_protocol, IPPROTO_ESP); unregister_pernet_device(&vti_net_ops); + unregister_netdevice_notifier(&vti_notifier_block); } module_init(vti_init); -- cgit v1.2.3 From 64827adc9e14c8d17cf5f3d5a9ee47a42e95dd8c Mon Sep 17 00:00:00 2001 From: Chunming Zhou Date: Thu, 28 Jul 2016 17:20:32 +0800 Subject: drm/amdgpu: fix vm init error path Signed-off-by: Chunming Zhou Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 8e642fc48df4..80120fa4092c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -1535,7 +1535,7 @@ int amdgpu_vm_init(struct amdgpu_device *adev, struct amdgpu_vm *vm) r = amd_sched_entity_init(&ring->sched, &vm->entity, rq, amdgpu_sched_jobs); if (r) - return r; + goto err; vm->page_directory_fence = NULL; @@ -1565,6 +1565,9 @@ error_free_page_directory: error_free_sched_entity: amd_sched_entity_fini(&ring->sched, &vm->entity); +err: + drm_free_large(vm->page_tables); + return r; } -- cgit v1.2.3 From 254a49d5139a70828d652ef4faec40763993e403 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Tue, 9 Aug 2016 15:09:44 +0300 Subject: drivers: net: cpsw: fix kmemleak false-positive reports for sk buffers Kmemleak reports following false positive memory leaks for each sk buffers allocated by CPSW (__netdev_alloc_skb_ip_align()) in cpsw_ndo_open() and cpsw_rx_handler(): unreferenced object 0xea915000 (size 2048): comm "systemd-network", pid 713, jiffies 4294938323 (age 102.180s) hex dump (first 32 bytes): 00 58 91 ea ff ff ff ff ff ff ff ff ff ff ff ff .X.............. ff ff ff ff ff ff fd 0f 00 00 00 00 00 00 00 00 ................ backtrace: [] __kmalloc_track_caller+0x1a4/0x230 [] __alloc_skb+0x68/0x16c [] __netdev_alloc_skb+0x40/0x104 [] cpsw_ndo_open+0x374/0x670 [ti_cpsw] [] __dev_open+0xb0/0x114 [] __dev_change_flags+0x9c/0x14c [] dev_change_flags+0x20/0x50 [] do_setlink+0x2cc/0x78c [] rtnl_setlink+0xcc/0x100 [] rtnetlink_rcv_msg+0x184/0x224 [] netlink_rcv_skb+0xa8/0xc4 [] rtnetlink_rcv+0x2c/0x34 [] netlink_unicast+0x16c/0x1f8 [] netlink_sendmsg+0x334/0x348 [] sock_sendmsg+0x1c/0x2c [] SyS_sendto+0xc0/0xe8 unreferenced object 0xec861780 (size 192): comm "softirq", pid 0, jiffies 4294938759 (age 109.540s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 b0 5a ed 00 00 00 00 00 00 00 00 ......Z......... backtrace: [] kmem_cache_alloc+0x190/0x208 [] __build_skb+0x30/0x98 [] __netdev_alloc_skb+0xb8/0x104 [] cpsw_rx_handler+0x68/0x1e4 [ti_cpsw] [] __cpdma_chan_free+0xa8/0xc4 [davinci_cpdma] [] __cpdma_chan_process+0x14c/0x16c [davinci_cpdma] [] cpdma_chan_process+0x44/0x5c [davinci_cpdma] [] cpsw_rx_poll+0x1c/0x9c [ti_cpsw] [] net_rx_action+0x1f0/0x2ec [] __do_softirq+0x134/0x258 [] do_softirq+0x68/0x70 [] __local_bh_enable_ip+0xd4/0xe8 [] _raw_spin_unlock_bh+0x30/0x34 [] igmp6_group_added+0x4c/0x1bc [] ipv6_dev_mc_inc+0x398/0x434 [] addrconf_dad_work+0x224/0x39c This happens because CPSW allocates SK buffers and then passes pointers on them in CPDMA where they stored in internal CPPI RAM (SRAM) which belongs to DEV MMIO space. Kmemleak does not scan IO memory and so reports memory leaks. Hence, mark allocated sk buffers as false positive explicitly. Cc: Catalin Marinas Signed-off-by: Grygorii Strashko Acked-by: Catalin Marinas Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index c51f34693eae..f85d605e4560 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -734,6 +734,7 @@ static void cpsw_rx_handler(void *token, int len, int status) netif_receive_skb(skb); ndev->stats.rx_bytes += len; ndev->stats.rx_packets++; + kmemleak_not_leak(new_skb); } else { ndev->stats.rx_dropped++; new_skb = skb; @@ -1325,6 +1326,7 @@ static int cpsw_ndo_open(struct net_device *ndev) kfree_skb(skb); goto err_cleanup; } + kmemleak_not_leak(skb); } /* continue even if we didn't manage to submit all * receive descs -- cgit v1.2.3 From 0d039f337f45c48fb78b80cbf7b706b4de7f07ea Mon Sep 17 00:00:00 2001 From: Zhu Yanjun Date: Tue, 9 Aug 2016 21:36:04 +0800 Subject: bonding: fix the typo The message "803.ad" should be "802.3ad". Signed-off-by: Zhu Yanjun Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 1f276fa30ba6..217e8da0628c 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -152,7 +152,7 @@ module_param(lacp_rate, charp, 0); MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner; " "0 for slow, 1 for fast"); module_param(ad_select, charp, 0); -MODULE_PARM_DESC(ad_select, "803.ad aggregation selection logic; " +MODULE_PARM_DESC(ad_select, "802.3ad aggregation selection logic; " "0 for stable (default), 1 for bandwidth, " "2 for count"); module_param(min_links, int, 0); -- cgit v1.2.3 From b9a019899f61acca18df5fb5e38a8fcdfea86fcd Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 28 Jul 2016 19:38:07 +0100 Subject: ARM: 8590/1: sanity_check_meminfo(): avoid overflow on vmalloc_limit To limit the amount of mapped low memory, we determine a physical address boundary based on the start of the vmalloc area using __pa(). Strictly speaking, the vmalloc area location is arbitrary and does not necessarily corresponds to a valid physical address. For example, if PAGE_OFFSET = 0x80000000 PHYS_OFFSET = 0x90000000 vmalloc_min = 0xf0000000 then __pa(vmalloc_min) overflows and returns a wrapped 0 when phys_addr_t is a 32-bit type. Then the code that follows determines that the entire physical memory is above that boundary and no low memory gets mapped at all: |[...] |Machine model: Freescale i.MX51 NA04 Board |Ignoring RAM at 0x90000000-0xb0000000 (!CONFIG_HIGHMEM) |Consider using a HIGHMEM enabled kernel. To avoid this problem let's make vmalloc_limit a 64-bit value all the time and determine that boundary explicitly without using __pa(). Reported-by: Emil Renner Berthing Signed-off-by: Nicolas Pitre Tested-by: Emil Renner Berthing Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 62f4d01941f7..12774c8e770c 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -1155,10 +1155,19 @@ void __init sanity_check_meminfo(void) { phys_addr_t memblock_limit = 0; int highmem = 0; - phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1; + u64 vmalloc_limit; struct memblock_region *reg; bool should_use_highmem = false; + /* + * Let's use our own (unoptimized) equivalent of __pa() that is + * not affected by wrap-arounds when sizeof(phys_addr_t) == 4. + * The result is used as the upper bound on physical memory address + * and may itself be outside the valid range for which phys_addr_t + * and therefore __pa() is defined. + */ + vmalloc_limit = (u64)(uintptr_t)vmalloc_min - PAGE_OFFSET + PHYS_OFFSET; + for_each_memblock(memory, reg) { phys_addr_t block_start = reg->base; phys_addr_t block_end = reg->base + reg->size; @@ -1183,10 +1192,11 @@ void __init sanity_check_meminfo(void) if (reg->size > size_limit) { phys_addr_t overlap_size = reg->size - size_limit; - pr_notice("Truncating RAM at %pa-%pa to -%pa", - &block_start, &block_end, &vmalloc_limit); - memblock_remove(vmalloc_limit, overlap_size); + pr_notice("Truncating RAM at %pa-%pa", + &block_start, &block_end); block_end = vmalloc_limit; + pr_cont(" to -%pa", &block_end); + memblock_remove(vmalloc_limit, overlap_size); should_use_highmem = true; } } -- cgit v1.2.3 From 61444cde9170e256c238a02c9a4861930db04f5f Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Thu, 28 Jul 2016 19:48:44 +0100 Subject: ARM: 8591/1: mm: use fully constructed struct pages for EFI pgd allocations The late_alloc() PTE allocation function used by create_mapping_late() does not call pgtable_page_ctor() on PTE pages it allocates, leaving the per-page spinlock uninitialized. Since generic page table manipulation code may assume that translation table pages that are not owned by init_mm are covered by fully constructed struct pages, the following crash may occur with the new UEFI memory attributes table code. efi: memattr: Processing EFI Memory Attributes table: efi: memattr: 0x0000ffa16000-0x0000ffa82fff [Runtime Code |RUN| | |XP| | | | | | | | ] Unable to handle kernel NULL pointer dereference at virtual address 00000010 pgd = c0204000 [00000010] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc4-00063-g3882aa7b340b #361 Hardware name: Generic DT based system task: ed858000 ti: ed842000 task.ti: ed842000 PC is at __lock_acquire+0xa0/0x19a8 ... [] (__lock_acquire) from [] (lock_acquire+0x6c/0x88) [] (lock_acquire) from [] (_raw_spin_lock+0x2c/0x3c) [] (_raw_spin_lock) from [] (apply_to_page_range+0xe8/0x238) [] (apply_to_page_range) from [] (efi_set_mapping_permissions+0x54/0x5c) [] (efi_set_mapping_permissions) from [] (efi_memattr_apply_permissions+0x2b8/0x378) [] (efi_memattr_apply_permissions) from [] (arm_enable_runtime_services+0x1f0/0x22c) [] (arm_enable_runtime_services) from [] (do_one_initcall+0x44/0x174) [] (do_one_initcall) from [] (kernel_init_freeable+0x90/0x1e8) [] (kernel_init_freeable) from [] (kernel_init+0x8/0x114) [] (kernel_init) from [] (ret_from_fork+0x14/0x24) The crash is due to the fact that the UEFI page tables are not owned by init_mm, but are not covered by fully constructed struct pages. Given that the UEFI subsystem is currently the only user of create_mapping_late(), add an unconditional call to pgtable_page_ctor() to late_alloc(). Fixes: 9fc68b717c24 ("ARM/efi: Apply strict permissions for UEFI Runtime Services regions") Signed-off-by: Ard Biesheuvel Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 12774c8e770c..6344913f0804 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -728,7 +728,8 @@ static void *__init late_alloc(unsigned long sz) { void *ptr = (void *)__get_free_pages(PGALLOC_GFP, get_order(sz)); - BUG_ON(!ptr); + if (!ptr || !pgtable_page_ctor(virt_to_page(ptr))) + BUG(); return ptr; } -- cgit v1.2.3 From 87eed3c74d7c65556f744230a90bf9556dd29146 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 3 Aug 2016 10:33:35 +0100 Subject: ARM: fix address limit restoration for undefined instructions During boot, sometimes the kernel will test to see if an instruction causes an undefined instruction exception. Unfortunately, the exit path for these exceptions did not restore the address limit, which causes the rootfs mount code to fail. Fix the missing address limit restoration. Tested-by: Guenter Roeck Signed-off-by: Russell King --- arch/arm/kernel/entry-armv.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index bc5f50799d75..9f157e7c51e7 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -295,6 +295,7 @@ __und_svc_fault: bl __und_fault __und_svc_finish: + get_thread_info tsk ldr r5, [sp, #S_PSR] @ Get SVC cpsr svc_exit r5 @ return from exception UNWIND(.fnend ) -- cgit v1.2.3 From a96d3b7593a3eefab62dd930e5c99201c3678ee4 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Tue, 9 Aug 2016 18:00:08 +0200 Subject: dm9000: Fix irq trigger type setup on non-dt platforms Commit b5a099c67a1c36b "net: ethernet: davicom: fix devicetree irq resource" causes an interrupt storm after the ethernet interface is activated on S3C24XX platform (ARM non-dt), due to the interrupt trigger type not being set properly. It seems, after adding parsing of IRQ flags in commit 7085a7401ba54e92b "drivers: platform: parse IRQ flags from resources", there is no path for non-dt platforms where irq_set_type callback could be invoked when we don't pass the trigger type flags to the request_irq() call. In case of a board where the regression is seen the interrupt trigger type flags are passed through a platform device's resource and it is not currently handled properly without passing the irq trigger type flags to the request_irq() call. In case of OF an of_irq_get() call within platform_get_irq() function seems to be ensuring required irq_chip setup, but there is no equivalent code for non OF/ACPI platforms. This patch mostly restores irq trigger type setting code which has been removed in commit ("net: ethernet: davicom: fix devicetree irq resource"). Fixes: b5a099c67a1c36b913 ("net: ethernet: davicom: fix devicetree irq resource") Signed-off-by: Sylwester Nawrocki Acked-by: Robert Jarzmik Signed-off-by: David S. Miller --- drivers/net/ethernet/davicom/dm9000.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 1471e16ba719..f45385f5c6e5 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -1299,6 +1299,7 @@ static int dm9000_open(struct net_device *dev) { struct board_info *db = netdev_priv(dev); + unsigned int irq_flags = irq_get_trigger_type(dev->irq); if (netif_msg_ifup(db)) dev_dbg(db->dev, "enabling %s\n", dev->name); @@ -1306,9 +1307,11 @@ dm9000_open(struct net_device *dev) /* If there is no IRQ type specified, tell the user that this is a * problem */ - if (irq_get_trigger_type(dev->irq) == IRQF_TRIGGER_NONE) + if (irq_flags == IRQF_TRIGGER_NONE) dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n"); + irq_flags |= IRQF_SHARED; + /* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */ iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */ mdelay(1); /* delay needs by DM9000B */ @@ -1316,8 +1319,7 @@ dm9000_open(struct net_device *dev) /* Initialize DM9000 board */ dm9000_init_dm9000(dev); - if (request_irq(dev->irq, dm9000_interrupt, IRQF_SHARED, - dev->name, dev)) + if (request_irq(dev->irq, dm9000_interrupt, irq_flags, dev->name, dev)) return -EAGAIN; /* Now that we have an interrupt handler hooked up we can unmask * our interrupts -- cgit v1.2.3 From 836384d2501dee87b1c437f3e268871980c857bf Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Fri, 5 Aug 2016 14:35:41 +0800 Subject: net: phy: micrel: Add specific suspend Disable all interrupts when suspend, they will be enabled when resume. Otherwise, the suspend/resume process will be blocked occasionally. Signed-off-by: Wenyou Yang Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 1882d9828c99..053e87905b94 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -677,17 +677,28 @@ static void kszphy_get_stats(struct phy_device *phydev, data[i] = kszphy_get_stat(phydev, i); } -static int kszphy_resume(struct phy_device *phydev) +static int kszphy_suspend(struct phy_device *phydev) { - int value; + /* Disable PHY Interrupts */ + if (phy_interrupt_is_valid(phydev)) { + phydev->interrupts = PHY_INTERRUPT_DISABLED; + if (phydev->drv->config_intr) + phydev->drv->config_intr(phydev); + } - mutex_lock(&phydev->lock); + return genphy_suspend(phydev); +} - value = phy_read(phydev, MII_BMCR); - phy_write(phydev, MII_BMCR, value & ~BMCR_PDOWN); +static int kszphy_resume(struct phy_device *phydev) +{ + genphy_resume(phydev); - kszphy_config_intr(phydev); - mutex_unlock(&phydev->lock); + /* Enable PHY Interrupts */ + if (phy_interrupt_is_valid(phydev)) { + phydev->interrupts = PHY_INTERRUPT_ENABLED; + if (phydev->drv->config_intr) + phydev->drv->config_intr(phydev); + } return 0; } @@ -900,7 +911,7 @@ static struct phy_driver ksphy_driver[] = { .get_sset_count = kszphy_get_sset_count, .get_strings = kszphy_get_strings, .get_stats = kszphy_get_stats, - .suspend = genphy_suspend, + .suspend = kszphy_suspend, .resume = kszphy_resume, }, { .phy_id = PHY_ID_KSZ8061, -- cgit v1.2.3 From 06f4e94898918bcad00cdd4d349313a439d6911e Mon Sep 17 00:00:00 2001 From: Zefan Li Date: Tue, 9 Aug 2016 11:25:01 +0800 Subject: cpuset: make sure new tasks conform to the current config of the cpuset A new task inherits cpus_allowed and mems_allowed masks from its parent, but if someone changes cpuset's config by writing to cpuset.cpus/cpuset.mems before this new task is inserted into the cgroup's task list, the new task won't be updated accordingly. Signed-off-by: Zefan Li Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- kernel/cpuset.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index c7fd2778ed50..c27e53326bef 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -2069,6 +2069,20 @@ static void cpuset_bind(struct cgroup_subsys_state *root_css) mutex_unlock(&cpuset_mutex); } +/* + * Make sure the new task conform to the current state of its parent, + * which could have been changed by cpuset just after it inherits the + * state from the parent and before it sits on the cgroup's task list. + */ +void cpuset_fork(struct task_struct *task) +{ + if (task_css_is_root(task, cpuset_cgrp_id)) + return; + + set_cpus_allowed_ptr(task, ¤t->cpus_allowed); + task->mems_allowed = current->mems_allowed; +} + struct cgroup_subsys cpuset_cgrp_subsys = { .css_alloc = cpuset_css_alloc, .css_online = cpuset_css_online, @@ -2079,6 +2093,7 @@ struct cgroup_subsys cpuset_cgrp_subsys = { .attach = cpuset_attach, .post_attach = cpuset_post_attach, .bind = cpuset_bind, + .fork = cpuset_fork, .legacy_cftypes = files, .early_init = true, }; -- cgit v1.2.3 From 7bb90c3715a496c650b2e879225030f9dd9cfafb Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Thu, 4 Aug 2016 11:11:19 +0900 Subject: bridge: Fix problems around fdb entries pointing to the bridge device Adding fdb entries pointing to the bridge device uses fdb_insert(), which lacks various checks and does not respect added_by_user flag. As a result, some inconsistent behavior can happen: * Adding temporary entries succeeds but results in permanent entries. * Same goes for "dynamic" and "use". * Changing mac address of the bridge device causes deletion of user-added entries. * Replacing existing entries looks successful from userspace but actually not, regardless of NLM_F_EXCL flag. Use the same logic as other entries and fix them. Fixes: 3741873b4f73 ("bridge: allow adding of fdb entries pointing to the bridge device") Signed-off-by: Toshiaki Makita Acked-by: Roopa Prabhu Signed-off-by: David S. Miller --- net/bridge/br_fdb.c | 52 +++++++++++++++++++++++++++------------------------- 1 file changed, 27 insertions(+), 25 deletions(-) diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c index c18080ad4085..cd620fab41b0 100644 --- a/net/bridge/br_fdb.c +++ b/net/bridge/br_fdb.c @@ -267,7 +267,7 @@ void br_fdb_change_mac_address(struct net_bridge *br, const u8 *newaddr) /* If old entry was unassociated with any port, then delete it. */ f = __br_fdb_get(br, br->dev->dev_addr, 0); - if (f && f->is_local && !f->dst) + if (f && f->is_local && !f->dst && !f->added_by_user) fdb_delete_local(br, NULL, f); fdb_insert(br, NULL, newaddr, 0); @@ -282,7 +282,7 @@ void br_fdb_change_mac_address(struct net_bridge *br, const u8 *newaddr) if (!br_vlan_should_use(v)) continue; f = __br_fdb_get(br, br->dev->dev_addr, v->vid); - if (f && f->is_local && !f->dst) + if (f && f->is_local && !f->dst && !f->added_by_user) fdb_delete_local(br, NULL, f); fdb_insert(br, NULL, newaddr, v->vid); } @@ -764,20 +764,25 @@ out: } /* Update (create or replace) forwarding database entry */ -static int fdb_add_entry(struct net_bridge_port *source, const __u8 *addr, - __u16 state, __u16 flags, __u16 vid) +static int fdb_add_entry(struct net_bridge *br, struct net_bridge_port *source, + const __u8 *addr, __u16 state, __u16 flags, __u16 vid) { - struct net_bridge *br = source->br; struct hlist_head *head = &br->hash[br_mac_hash(addr, vid)]; struct net_bridge_fdb_entry *fdb; bool modified = false; /* If the port cannot learn allow only local and static entries */ - if (!(state & NUD_PERMANENT) && !(state & NUD_NOARP) && + if (source && !(state & NUD_PERMANENT) && !(state & NUD_NOARP) && !(source->state == BR_STATE_LEARNING || source->state == BR_STATE_FORWARDING)) return -EPERM; + if (!source && !(state & NUD_PERMANENT)) { + pr_info("bridge: RTM_NEWNEIGH %s without NUD_PERMANENT\n", + br->dev->name); + return -EINVAL; + } + fdb = fdb_find(head, addr, vid); if (fdb == NULL) { if (!(flags & NLM_F_CREATE)) @@ -832,22 +837,28 @@ static int fdb_add_entry(struct net_bridge_port *source, const __u8 *addr, return 0; } -static int __br_fdb_add(struct ndmsg *ndm, struct net_bridge_port *p, - const unsigned char *addr, u16 nlh_flags, u16 vid) +static int __br_fdb_add(struct ndmsg *ndm, struct net_bridge *br, + struct net_bridge_port *p, const unsigned char *addr, + u16 nlh_flags, u16 vid) { int err = 0; if (ndm->ndm_flags & NTF_USE) { + if (!p) { + pr_info("bridge: RTM_NEWNEIGH %s with NTF_USE is not supported\n", + br->dev->name); + return -EINVAL; + } local_bh_disable(); rcu_read_lock(); - br_fdb_update(p->br, p, addr, vid, true); + br_fdb_update(br, p, addr, vid, true); rcu_read_unlock(); local_bh_enable(); } else { - spin_lock_bh(&p->br->hash_lock); - err = fdb_add_entry(p, addr, ndm->ndm_state, + spin_lock_bh(&br->hash_lock); + err = fdb_add_entry(br, p, addr, ndm->ndm_state, nlh_flags, vid); - spin_unlock_bh(&p->br->hash_lock); + spin_unlock_bh(&br->hash_lock); } return err; @@ -884,6 +895,7 @@ int br_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], dev->name); return -EINVAL; } + br = p->br; vg = nbp_vlan_group(p); } @@ -895,15 +907,9 @@ int br_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], } /* VID was specified, so use it. */ - if (dev->priv_flags & IFF_EBRIDGE) - err = br_fdb_insert(br, NULL, addr, vid); - else - err = __br_fdb_add(ndm, p, addr, nlh_flags, vid); + err = __br_fdb_add(ndm, br, p, addr, nlh_flags, vid); } else { - if (dev->priv_flags & IFF_EBRIDGE) - err = br_fdb_insert(br, NULL, addr, 0); - else - err = __br_fdb_add(ndm, p, addr, nlh_flags, 0); + err = __br_fdb_add(ndm, br, p, addr, nlh_flags, 0); if (err || !vg || !vg->num_vlans) goto out; @@ -914,11 +920,7 @@ int br_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], list_for_each_entry(v, &vg->vlan_list, vlist) { if (!br_vlan_should_use(v)) continue; - if (dev->priv_flags & IFF_EBRIDGE) - err = br_fdb_insert(br, NULL, addr, v->vid); - else - err = __br_fdb_add(ndm, p, addr, nlh_flags, - v->vid); + err = __br_fdb_add(ndm, br, p, addr, nlh_flags, v->vid); if (err) goto out; } -- cgit v1.2.3 From 9ba333dc55cbb9523553df973adb3024d223e905 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Mon, 8 Aug 2016 14:08:17 +0200 Subject: s390/dasd: fix hanging device after clear subchannel When a device is in a status where CIO has killed all I/O by itself the interrupt for a clear request may not contain an irb to determine the clear function. Instead it contains an error pointer -EIO. This was ignored by the DASD int_handler leading to a hanging device waiting for a clear interrupt. Handle -EIO error pointer correctly for requests that are clear pending and treat the clear as successful. Signed-off-by: Stefan Haberland Reviewed-by: Sebastian Ott Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 8973d34ce5ba..fb1b56a71475 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -1643,9 +1643,18 @@ void dasd_int_handler(struct ccw_device *cdev, unsigned long intparm, u8 *sense = NULL; int expires; + cqr = (struct dasd_ccw_req *) intparm; if (IS_ERR(irb)) { switch (PTR_ERR(irb)) { case -EIO: + if (cqr && cqr->status == DASD_CQR_CLEAR_PENDING) { + device = (struct dasd_device *) cqr->startdev; + cqr->status = DASD_CQR_CLEARED; + dasd_device_clear_timer(device); + wake_up(&dasd_flush_wq); + dasd_schedule_device_bh(device); + return; + } break; case -ETIMEDOUT: DBF_EVENT_DEVID(DBF_WARNING, cdev, "%s: " @@ -1661,7 +1670,6 @@ void dasd_int_handler(struct ccw_device *cdev, unsigned long intparm, } now = get_tod_clock(); - cqr = (struct dasd_ccw_req *) intparm; /* check for conditions that should be handled immediately */ if (!cqr || !(scsw_dstat(&irb->scsw) == (DEV_STAT_CHN_END | DEV_STAT_DEV_END) && -- cgit v1.2.3 From 4d81aaa53c2dea220ddf88e19c33033d6cf4f8cb Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 9 Aug 2016 12:26:28 +0200 Subject: s390/pageattr: handle numpages parameter correctly Both set_memory_ro() and set_memory_rw() will modify the page attributes of at least one page, even if the numpages parameter is zero. The author expected that calling these functions with numpages == zero would never happen. However with the new 444d13ff10fb ("modules: add ro_after_init support") feature this happens frequently. Therefore do the right thing and make these two functions return gracefully if nothing should be done. Fixes crashes on module load like this one: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 000003ff80008000 TEID: 000003ff80008407 Fault in home space mode while using kernel ASCE. AS:0000000000d18007 R3:00000001e6aa4007 S:00000001e6a10800 P:00000001e34ee21d Oops: 0004 ilc:3 [#1] SMP Modules linked in: x_tables CPU: 10 PID: 1 Comm: systemd Not tainted 4.7.0-11895-g3fa9045 #4 Hardware name: IBM 2964 N96 703 (LPAR) task: 00000001e9118000 task.stack: 00000001e9120000 Krnl PSW : 0704e00180000000 00000000005677f8 (rb_erase+0xf0/0x4d0) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 000003ff80008b20 000003ff80008b20 000003ff80008b70 0000000000b9d608 000003ff80008b20 0000000000000000 00000001e9123e88 000003ff80008950 00000001e485ab40 000003ff00000000 000003ff80008b00 00000001e4858480 0000000100000000 000003ff80008b68 00000000001d5998 00000001e9123c28 Krnl Code: 00000000005677e8: ec1801c3007c cgij %r1,0,8,567b6e 00000000005677ee: e32010100020 cg %r2,16(%r1) #00000000005677f4: a78401c2 brc 8,567b78 >00000000005677f8: e35010080024 stg %r5,8(%r1) 00000000005677fe: ec5801af007c cgij %r5,0,8,567b5c 0000000000567804: e30050000024 stg %r0,0(%r5) 000000000056780a: ebacf0680004 lmg %r10,%r12,104(%r15) 0000000000567810: 07fe bcr 15,%r14 Call Trace: ([<000003ff80008900>] __this_module+0x0/0xffffffffffffd700 [x_tables]) ([<0000000000264fd4>] do_init_module+0x12c/0x220) ([<00000000001da14a>] load_module+0x24e2/0x2b10) ([<00000000001da976>] SyS_finit_module+0xbe/0xd8) ([<0000000000803b26>] system_call+0xd6/0x264) Last Breaking-Event-Address: [<000000000056771a>] rb_erase+0x12/0x4d0 Kernel panic - not syncing: Fatal exception: panic_on_oops Reported-by: Christian Borntraeger Reported-and-tested-by: Sebastian Ott Fixes: e8a97e42dc98 ("s390/pageattr: allow kernel page table splitting") Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/mm/pageattr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/s390/mm/pageattr.c b/arch/s390/mm/pageattr.c index 7104ffb5a67f..af7cf28cf97e 100644 --- a/arch/s390/mm/pageattr.c +++ b/arch/s390/mm/pageattr.c @@ -252,6 +252,8 @@ static int change_page_attr(unsigned long addr, unsigned long end, int rc = -EINVAL; pgd_t *pgdp; + if (addr == end) + return 0; if (end >= MODULES_END) return -EINVAL; mutex_lock(&cpa_mutex); -- cgit v1.2.3 From 99e5e886a0a59df267ff6838f763b789847df982 Mon Sep 17 00:00:00 2001 From: Christoffer Dall Date: Mon, 1 Aug 2016 20:25:33 +0200 Subject: KVM: arm64: vgic-its: Handle errors from vgic_add_lpi During low memory conditions, we could be dereferencing a NULL pointer when vgic_add_lpi fails to allocate memory. Consider for example this call sequence: vgic_its_cmd_handle_mapi itte->irq = vgic_add_lpi(kvm, lpi_nr); update_lpi_config(kvm, itte->irq, NULL); ret = kvm_read_guest(kvm, propbase + irq->intid ^^^^ kaboom? Instead, return an error pointer from vgic_add_lpi and check the return value from its single caller. Signed-off-by: Christoffer Dall --- virt/kvm/arm/vgic/vgic-its.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/virt/kvm/arm/vgic/vgic-its.c b/virt/kvm/arm/vgic/vgic-its.c index 1bd8adbeae26..d06330abd5e8 100644 --- a/virt/kvm/arm/vgic/vgic-its.c +++ b/virt/kvm/arm/vgic/vgic-its.c @@ -51,7 +51,7 @@ static struct vgic_irq *vgic_add_lpi(struct kvm *kvm, u32 intid) irq = kzalloc(sizeof(struct vgic_irq), GFP_KERNEL); if (!irq) - return NULL; + return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&irq->lpi_list); INIT_LIST_HEAD(&irq->ap_list); @@ -522,7 +522,8 @@ static void its_free_itte(struct kvm *kvm, struct its_itte *itte) list_del(&itte->itte_list); /* This put matches the get in vgic_add_lpi. */ - vgic_put_irq(kvm, itte->irq); + if (itte->irq) + vgic_put_irq(kvm, itte->irq); kfree(itte); } @@ -713,10 +714,11 @@ static int vgic_its_cmd_handle_mapi(struct kvm *kvm, struct vgic_its *its, u32 device_id = its_cmd_get_deviceid(its_cmd); u32 event_id = its_cmd_get_id(its_cmd); u32 coll_id = its_cmd_get_collection(its_cmd); - struct its_itte *itte; + struct its_itte *itte, *new_itte = NULL; struct its_device *device; struct its_collection *collection, *new_coll = NULL; int lpi_nr; + struct vgic_irq *irq; device = find_its_device(its, device_id); if (!device) @@ -747,13 +749,24 @@ static int vgic_its_cmd_handle_mapi(struct kvm *kvm, struct vgic_its *its, return -ENOMEM; } + new_itte = itte; itte->event_id = event_id; list_add_tail(&itte->itte_list, &device->itt_head); } itte->collection = collection; itte->lpi = lpi_nr; - itte->irq = vgic_add_lpi(kvm, lpi_nr); + + irq = vgic_add_lpi(kvm, lpi_nr); + if (IS_ERR(irq)) { + if (new_coll) + vgic_its_free_collection(its, coll_id); + if (new_itte) + its_free_itte(kvm, new_itte); + return PTR_ERR(irq); + } + itte->irq = irq; + update_affinity_itte(kvm, itte); /* -- cgit v1.2.3 From 2cccbb368a2bf27d98cf36bb424fbbf5572c0fab Mon Sep 17 00:00:00 2001 From: Christoffer Dall Date: Tue, 2 Aug 2016 22:05:42 +0200 Subject: KVM: arm64: vgic-its: Plug race in vgic_put_irq Right now the following sequence of events can happen: 1. Thread X calls vgic_put_irq 2. Thread Y calls vgic_add_lpi 3. Thread Y gets lpi_list_lock 4. Thread X drops the ref count to 0 and blocks on lpi_list_lock 5. Thread Y finds the irq via the lpi_list_lock, raises the ref count to 1, and release the lpi_list_lock. 6. Thread X proceeds and frees the irq. Avoid this by holding the spinlock around the kref_put. Reviewed-by: Andre Przywara Signed-off-by: Christoffer Dall --- virt/kvm/arm/vgic/vgic.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/virt/kvm/arm/vgic/vgic.c b/virt/kvm/arm/vgic/vgic.c index e7aeac719e09..e83b7fe4baae 100644 --- a/virt/kvm/arm/vgic/vgic.c +++ b/virt/kvm/arm/vgic/vgic.c @@ -117,17 +117,17 @@ static void vgic_irq_release(struct kref *ref) void vgic_put_irq(struct kvm *kvm, struct vgic_irq *irq) { - struct vgic_dist *dist; + struct vgic_dist *dist = &kvm->arch.vgic; if (irq->intid < VGIC_MIN_LPI) return; - if (!kref_put(&irq->refcount, vgic_irq_release)) + spin_lock(&dist->lpi_list_lock); + if (!kref_put(&irq->refcount, vgic_irq_release)) { + spin_unlock(&dist->lpi_list_lock); return; + }; - dist = &kvm->arch.vgic; - - spin_lock(&dist->lpi_list_lock); list_del(&irq->lpi_list); dist->lpi_list_count--; spin_unlock(&dist->lpi_list_lock); -- cgit v1.2.3 From c987ff0d3cb37d7fe1ddaa370811dfd9f73643fa Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Tue, 9 Aug 2016 17:31:35 +0100 Subject: iommu/dma: Respect IOMMU aperture when allocating Where a device driver has set a 64-bit DMA mask to indicate the absence of addressing limitations, we still need to ensure that we don't allocate IOVAs beyond the actual input size of the IOMMU. The reported aperture is the most reliable way we have of inferring that input address size, so use that to enforce a hard upper limit where available. Fixes: 0db2e5d18f76 ("iommu: Implement common IOMMU ops for DMA mapping") Signed-off-by: Robin Murphy Signed-off-by: Joerg Roedel --- drivers/iommu/dma-iommu.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c index 7d991c81c4fa..00c8a08d56e7 100644 --- a/drivers/iommu/dma-iommu.c +++ b/drivers/iommu/dma-iommu.c @@ -152,12 +152,15 @@ int dma_direction_to_prot(enum dma_data_direction dir, bool coherent) } } -static struct iova *__alloc_iova(struct iova_domain *iovad, size_t size, +static struct iova *__alloc_iova(struct iommu_domain *domain, size_t size, dma_addr_t dma_limit) { + struct iova_domain *iovad = domain->iova_cookie; unsigned long shift = iova_shift(iovad); unsigned long length = iova_align(iovad, size) >> shift; + if (domain->geometry.force_aperture) + dma_limit = min(dma_limit, domain->geometry.aperture_end); /* * Enforce size-alignment to be safe - there could perhaps be an * attribute to control this per-device, or at least per-domain... @@ -315,7 +318,7 @@ struct page **iommu_dma_alloc(struct device *dev, size_t size, gfp_t gfp, if (!pages) return NULL; - iova = __alloc_iova(iovad, size, dev->coherent_dma_mask); + iova = __alloc_iova(domain, size, dev->coherent_dma_mask); if (!iova) goto out_free_pages; @@ -387,7 +390,7 @@ dma_addr_t iommu_dma_map_page(struct device *dev, struct page *page, phys_addr_t phys = page_to_phys(page) + offset; size_t iova_off = iova_offset(iovad, phys); size_t len = iova_align(iovad, size + iova_off); - struct iova *iova = __alloc_iova(iovad, len, dma_get_mask(dev)); + struct iova *iova = __alloc_iova(domain, len, dma_get_mask(dev)); if (!iova) return DMA_ERROR_CODE; @@ -539,7 +542,7 @@ int iommu_dma_map_sg(struct device *dev, struct scatterlist *sg, prev = s; } - iova = __alloc_iova(iovad, iova_len, dma_get_mask(dev)); + iova = __alloc_iova(domain, iova_len, dma_get_mask(dev)); if (!iova) goto out_restore_sg; -- cgit v1.2.3 From 4da449ae1df9cfeb167e78f250b250eff64bc65e Mon Sep 17 00:00:00 2001 From: Laura Garcia Liebana Date: Tue, 9 Aug 2016 20:46:16 +0200 Subject: netfilter: nft_exthdr: Add size check on u8 nft_exthdr attributes Fix the direct assignment of offset and length attributes included in nft_exthdr structure from u32 data to u8. Signed-off-by: Laura Garcia Liebana Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_exthdr.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nft_exthdr.c b/net/netfilter/nft_exthdr.c index ba7aed13e174..82c264e40278 100644 --- a/net/netfilter/nft_exthdr.c +++ b/net/netfilter/nft_exthdr.c @@ -59,6 +59,7 @@ static int nft_exthdr_init(const struct nft_ctx *ctx, const struct nlattr * const tb[]) { struct nft_exthdr *priv = nft_expr_priv(expr); + u32 offset, len; if (tb[NFTA_EXTHDR_DREG] == NULL || tb[NFTA_EXTHDR_TYPE] == NULL || @@ -66,9 +67,15 @@ static int nft_exthdr_init(const struct nft_ctx *ctx, tb[NFTA_EXTHDR_LEN] == NULL) return -EINVAL; + offset = ntohl(nla_get_be32(tb[NFTA_EXTHDR_OFFSET])); + len = ntohl(nla_get_be32(tb[NFTA_EXTHDR_LEN])); + + if (offset > U8_MAX || len > U8_MAX) + return -ERANGE; + priv->type = nla_get_u8(tb[NFTA_EXTHDR_TYPE]); - priv->offset = ntohl(nla_get_be32(tb[NFTA_EXTHDR_OFFSET])); - priv->len = ntohl(nla_get_be32(tb[NFTA_EXTHDR_LEN])); + priv->offset = offset; + priv->len = len; priv->dreg = nft_parse_register(tb[NFTA_EXTHDR_DREG]); return nft_validate_register_store(ctx, priv->dreg, NULL, -- cgit v1.2.3 From c7de573471832dff7d31f0c13b0f143d6f017799 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 29 Jul 2016 03:17:58 +0300 Subject: usb: dwc3: gadget: increment request->actual once When using SG lists, we would end up setting request->actual to: num_mapped_sgs * (request->length - count) Let's fix that up by incrementing request->actual only once. Cc: Reported-by: Brian E Rogers Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 8f8c2157910e..863c306ebb69 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2013,14 +2013,6 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, s_pkt = 1; } - /* - * We assume here we will always receive the entire data block - * which we should receive. Meaning, if we program RX to - * receive 4K but we receive only 2K, we assume that's all we - * should receive and we simply bounce the request back to the - * gadget driver for further processing. - */ - req->request.actual += req->request.length - count; if (s_pkt) return 1; if ((event->status & DEPEVT_STATUS_LST) && @@ -2040,6 +2032,7 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, struct dwc3_trb *trb; unsigned int slot; unsigned int i; + int count = 0; int ret; do { @@ -2054,6 +2047,8 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, slot++; slot %= DWC3_TRB_NUM; trb = &dep->trb_pool[slot]; + count += trb->size & DWC3_TRB_SIZE_MASK; + ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, event, status); @@ -2061,6 +2056,14 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, break; } while (++i < req->request.num_mapped_sgs); + /* + * We assume here we will always receive the entire data block + * which we should receive. Meaning, if we program RX to + * receive 4K but we receive only 2K, we assume that's all we + * should receive and we simply bounce the request back to the + * gadget driver for further processing. + */ + req->request.actual += req->request.length - count; dwc3_gadget_giveback(dep, req, status); if (ret) -- cgit v1.2.3 From e5b36ae2f851024d43c76e51f395d32ce8d769ce Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 10 Aug 2016 11:13:26 +0300 Subject: usb: dwc3: gadget: fix for short pkts during chained xfers DWC3 has one interesting peculiarity with chained transfers. If we setup N chained transfers and we get a short packet before processing all N TRBs, DWC3 will (conditionally) issue a XferComplete or XferInProgress event and retire all TRBs from the one which got a short packet to the last without clearing their HWO bits. This means SW must clear HWO bit manually, which this patch is doing. Cc: Cc: Brian E Rogers Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 863c306ebb69..241f5c7b34bf 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1955,7 +1955,8 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, struct dwc3_request *req, struct dwc3_trb *trb, - const struct dwc3_event_depevt *event, int status) + const struct dwc3_event_depevt *event, int status, + int chain) { unsigned int count; unsigned int s_pkt = 0; @@ -1964,6 +1965,19 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, dep->queued_requests--; trace_dwc3_complete_trb(dep, trb); + /* + * If we're in the middle of series of chained TRBs and we + * receive a short transfer along the way, DWC3 will skip + * through all TRBs including the last TRB in the chain (the + * where CHN bit is zero. DWC3 will also avoid clearing HWO + * bit and SW has to do it manually. + * + * We're going to do that here to avoid problems of HW trying + * to use bogus TRBs for transfers. + */ + if (chain && (trb->ctrl & DWC3_TRB_CTRL_HWO)) + trb->ctrl &= ~DWC3_TRB_CTRL_HWO; + if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN) /* * We continue despite the error. There is not much we @@ -1975,6 +1989,7 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, */ dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n", dep->name, trb); + count = trb->size & DWC3_TRB_SIZE_MASK; if (dep->direction) { @@ -2036,10 +2051,13 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, int ret; do { + int chain; + req = next_request(&dep->started_list); if (WARN_ON_ONCE(!req)) return 1; + chain = req->request.num_mapped_sgs > 0; i = 0; do { slot = req->first_trb_index + i; @@ -2049,9 +2067,8 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, trb = &dep->trb_pool[slot]; count += trb->size & DWC3_TRB_SIZE_MASK; - ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, - event, status); + event, status, chain); if (ret) break; } while (++i < req->request.num_mapped_sgs); -- cgit v1.2.3 From 7c705dfe2ebe731c8fd068623b6b4df2d3512c08 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 10 Aug 2016 12:35:30 +0300 Subject: usb: dwc3: gadget: always cleanup all TRBs If we stop earlier due to short packet, we will not be able to giveback all TRBs. Cc: Cc: Brian E Rogers Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 241f5c7b34bf..eb820e4ab49d 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2028,7 +2028,7 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, s_pkt = 1; } - if (s_pkt) + if (s_pkt && !chain) return 1; if ((event->status & DEPEVT_STATUS_LST) && (trb->ctrl & (DWC3_TRB_CTRL_LST | -- cgit v1.2.3 From 4491ed5042f0419b22a4b08331adb54af31e2caa Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Fri, 1 Apr 2016 17:13:11 +0300 Subject: usb: dwc3: pci: add Intel Kabylake PCI ID Intel Kabylake PCH has the same DWC3 than Intel Sunrisepoint. Add the new ID to the supported devices. Cc: Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-pci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 45f5a232d9fb..2eb84d6c24a6 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -37,6 +37,7 @@ #define PCI_DEVICE_ID_INTEL_BXT 0x0aaa #define PCI_DEVICE_ID_INTEL_BXT_M 0x1aaa #define PCI_DEVICE_ID_INTEL_APL 0x5aaa +#define PCI_DEVICE_ID_INTEL_KBP 0xa2b0 static const struct acpi_gpio_params reset_gpios = { 0, 0, false }; static const struct acpi_gpio_params cs_gpios = { 1, 0, false }; @@ -227,6 +228,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT_M), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), }, { } /* Terminating Entry */ }; -- cgit v1.2.3 From 6f4deb18a505523eb7925d646574a95f9e982ff7 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Mon, 8 Aug 2016 15:58:56 +0200 Subject: gpio: max730x: set gpiochip data pointer before using it gpiochip_add_data() has to be called before calling max7301_direction_input() [ 4.389883] Unable to handle kernel paging request for data at address 0x00000018 [ 4.397282] Faulting instruction address: 0xc01a8cbc [ 4.402023] Oops: Kernel access of bad area, sig: 11 [#1] [ 4.407331] PREEMPT CMPC885 [ 4.410131] CPU: 0 PID: 6 Comm: kworker/u2:0 Not tainted 4.5.0-gacdfdee #39 [ 4.418592] Workqueue: deferwq deferred_probe_work_func [ 4.423711] task: c60798b0 ti: c608a000 task.ti: c608a000 [ 4.429038] NIP: c01a8cbc LR: c01a8e24 CTR: c01ff028 [ 4.433953] REGS: c608bad0 TRAP: 0300 Not tainted (4.5.0-s3k-dev-gacdfdee-svn-dirty) [ 4.441847] MSR: 00009032 CR: 33039553 XER: a000f940 [ 4.448395] DAR: 00000018 DSISR: c0000000 GPR00: c01a8e24 c608bb80 c60798b0 c60d6f6c 00000004 00000002 07de2900 00700000 GPR08: 00000000 00000000 c608a000 00001032 35039553 00000000 c002f37c c6010b64 GPR16: c6010a48 c6010a14 c6010a00 00000000 c0450000 c0453568 c0453438 c050db14 GPR24: c62662bc 00000009 ffffffaa c60d6f5d 00000001 00000000 00000000 00000000 [ 4.480371] NIP [c01a8cbc] max7301_direction_input+0x20/0x9c [ 4.485951] LR [c01a8e24] __max730x_probe+0xec/0x138 [ 4.490812] Call Trace: [ 4.493268] [c608bba0] [c01a8e24] __max730x_probe+0xec/0x138 [ 4.498878] [c608bbc0] [c01cc368] driver_probe_device+0x190/0x38c [ 4.504895] [c608bbf0] [c01ca918] bus_for_each_drv+0x58/0xb4 [ 4.510489] [c608bc20] [c01cc04c] __device_attach+0x8c/0x110 [ 4.516082] [c608bc50] [c01cab80] bus_probe_device+0x34/0xb8 [ 4.521673] [c608bc70] [c01c96c8] device_add+0x3c0/0x598 [ 4.526925] [c608bcb0] [c0200f90] spi_add_device+0x114/0x160 [ 4.532512] [c608bcd0] [c02018d0] spi_register_master+0x6e0/0x7c8 [ 4.538537] [c608bd20] [c02019fc] devm_spi_register_master+0x44/0x8c [ 4.544824] [c608bd40] [c0203854] of_fsl_spi_probe+0x458/0x57c [ 4.550587] [c608bda0] [c01cd828] platform_drv_probe+0x30/0x74 [ 4.556366] [c608bdb0] [c01cc368] driver_probe_device+0x190/0x38c [ 4.562383] [c608bde0] [c01ca918] bus_for_each_drv+0x58/0xb4 [ 4.567977] [c608be10] [c01cc04c] __device_attach+0x8c/0x110 [ 4.573572] [c608be40] [c01cab80] bus_probe_device+0x34/0xb8 [ 4.579170] [c608be60] [c01cb9b4] deferred_probe_work_func+0xa4/0xc4 [ 4.585438] [c608be80] [c0029c04] process_one_work+0x22c/0x414 [ 4.591201] [c608bea0] [c002a100] worker_thread+0x314/0x5c0 [ 4.596722] [c608bef0] [c002f444] kthread+0xc8/0xcc [ 4.601538] [c608bf40] [c000af84] ret_from_kernel_thread+0x5c/0x64 [ 4.607596] Instruction dump: [ 4.610530] 7c0803a6 bba10014 38210020 4e800020 7c0802a6 9421ffe0 38840004 bf810010 [ 4.618188] 90010024 549cf0be 83c30010 549d0f7c <813e0018> 7fc3f378 7d3f2430 57ff07fe [ 4.626041] ---[ end trace 303adb021dd4caf2 ]--- Cc: stable@vger.kernel.org fixes: 5e45e01916197 ("gpio: max730x: use gpiochip data pointer") Signed-off-by: Christophe Leroy Signed-off-by: Linus Walleij --- drivers/gpio/gpio-max730x.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpio/gpio-max730x.c b/drivers/gpio/gpio-max730x.c index 08807368f007..946d09195598 100644 --- a/drivers/gpio/gpio-max730x.c +++ b/drivers/gpio/gpio-max730x.c @@ -192,6 +192,10 @@ int __max730x_probe(struct max7301 *ts) ts->chip.parent = dev; ts->chip.owner = THIS_MODULE; + ret = gpiochip_add_data(&ts->chip, ts); + if (ret) + goto exit_destroy; + /* * initialize pullups according to platform data and cache the * register values for later use. @@ -213,10 +217,6 @@ int __max730x_probe(struct max7301 *ts) } } - ret = gpiochip_add_data(&ts->chip, ts); - if (ret) - goto exit_destroy; - return ret; exit_destroy: -- cgit v1.2.3 From 5b236d0fde21d88351420ef0b9a6cb7aeeea0c54 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 26 Jul 2016 14:51:58 +0000 Subject: pinctrl: meson: Drop pinctrl_unregister for devm_ registered device It's not necessary to unregister pin controller device registered with devm_pinctrl_register() and using pinctrl_unregister() leads to a double free. This is detected by Coccinelle semantic patch. Fixes: e649f7ec8c5f ("pinctrl: meson: Use devm_pinctrl_register() for pinctrl registration") Signed-off-by: Wei Yongjun Reviewed-by: Dmitry Torokhov Acked-by: Kevin Hilman Signed-off-by: Linus Walleij --- drivers/pinctrl/meson/pinctrl-meson.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c index 11623c6b0cb3..44e69c963f5d 100644 --- a/drivers/pinctrl/meson/pinctrl-meson.c +++ b/drivers/pinctrl/meson/pinctrl-meson.c @@ -727,13 +727,7 @@ static int meson_pinctrl_probe(struct platform_device *pdev) return PTR_ERR(pc->pcdev); } - ret = meson_gpiolib_register(pc); - if (ret) { - pinctrl_unregister(pc->pcdev); - return ret; - } - - return 0; + return meson_gpiolib_register(pc); } static struct platform_driver meson_pinctrl_driver = { -- cgit v1.2.3 From b120a3c286520ca465c54e8afa442be10560053b Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 26 Jul 2016 14:52:57 +0000 Subject: pinctrl: pistachio: Drop pinctrl_unregister for devm_ registered device It's not necessary to unregister pin controller device registered with devm_pinctrl_register() and using pinctrl_unregister() leads to a double free. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-pistachio.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/drivers/pinctrl/pinctrl-pistachio.c b/drivers/pinctrl/pinctrl-pistachio.c index c6d410ef8de0..7bad200bd67c 100644 --- a/drivers/pinctrl/pinctrl-pistachio.c +++ b/drivers/pinctrl/pinctrl-pistachio.c @@ -1432,7 +1432,6 @@ static int pistachio_pinctrl_probe(struct platform_device *pdev) { struct pistachio_pinctrl *pctl; struct resource *res; - int ret; pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL); if (!pctl) @@ -1464,13 +1463,7 @@ static int pistachio_pinctrl_probe(struct platform_device *pdev) return PTR_ERR(pctl->pctldev); } - ret = pistachio_gpio_register(pctl); - if (ret < 0) { - pinctrl_unregister(pctl->pctldev); - return ret; - } - - return 0; + return pistachio_gpio_register(pctl); } static struct platform_driver pistachio_pinctrl_driver = { -- cgit v1.2.3 From 8cf4345575a416e6856a6856ac6eaa31ad883126 Mon Sep 17 00:00:00 2001 From: "Agrawal, Nitesh-kumar" Date: Tue, 26 Jul 2016 08:28:19 +0000 Subject: pinctrl/amd: Remove the default de-bounce time MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In the function amd_gpio_irq_enable() and amd_gpio_direction_input(), remove the code which is setting the default de-bounce time to 2.75ms. The driver code shall use the same settings as specified in BIOS. Any default assignment impacts TouchPad behaviour when the LevelTrig is set to EDGE FALLING. Cc: stable@vger.kernel.org Reviewed-by:  Ken Xue Signed-off-by: Nitesh Kumar Agrawal Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-amd.c | 20 -------------------- 1 file changed, 20 deletions(-) diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index 634b4d30eefb..b3e772390ab6 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -43,17 +43,6 @@ static int amd_gpio_direction_input(struct gpio_chip *gc, unsigned offset) spin_lock_irqsave(&gpio_dev->lock, flags); pin_reg = readl(gpio_dev->base + offset * 4); - /* - * Suppose BIOS or Bootloader sets specific debounce for the - * GPIO. if not, set debounce to be 2.75ms and remove glitch. - */ - if ((pin_reg & DB_TMR_OUT_MASK) == 0) { - pin_reg |= 0xf; - pin_reg |= BIT(DB_TMR_OUT_UNIT_OFF); - pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF; - pin_reg &= ~BIT(DB_TMR_LARGE_OFF); - } - pin_reg &= ~BIT(OUTPUT_ENABLE_OFF); writel(pin_reg, gpio_dev->base + offset * 4); spin_unlock_irqrestore(&gpio_dev->lock, flags); @@ -326,15 +315,6 @@ static void amd_gpio_irq_enable(struct irq_data *d) spin_lock_irqsave(&gpio_dev->lock, flags); pin_reg = readl(gpio_dev->base + (d->hwirq)*4); - /* - Suppose BIOS or Bootloader sets specific debounce for the - GPIO. if not, set debounce to be 2.75ms. - */ - if ((pin_reg & DB_TMR_OUT_MASK) == 0) { - pin_reg |= 0xf; - pin_reg |= BIT(DB_TMR_OUT_UNIT_OFF); - pin_reg &= ~BIT(DB_TMR_LARGE_OFF); - } pin_reg |= BIT(INTERRUPT_ENABLE_OFF); pin_reg |= BIT(INTERRUPT_MASK_OFF); writel(pin_reg, gpio_dev->base + (d->hwirq)*4); -- cgit v1.2.3 From e95d0dfb229fffe96dc4c29054f6c7a7302e111e Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 2 Aug 2016 18:18:33 +0300 Subject: pinctrl: intel: merrifield: Add missed header MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On x86 builds the absense of makes static analyzer and compiler unhappy which fails to build the driver. CHECK drivers/pinctrl/intel/pinctrl-merrifield.c drivers/pinctrl/intel/pinctrl-merrifield.c:518:17: error: undefined identifier 'readl' drivers/pinctrl/intel/pinctrl-merrifield.c:570:17: error: undefined identifier 'readl' drivers/pinctrl/intel/pinctrl-merrifield.c:575:9: error: undefined identifier 'writel' drivers/pinctrl/intel/pinctrl-merrifield.c:645:17: error: undefined identifier 'readl' CC drivers/pinctrl/intel/pinctrl-merrifield.o drivers/pinctrl/intel/pinctrl-merrifield.c: In function ‘mrfld_pin_dbg_show’: drivers/pinctrl/intel/pinctrl-merrifield.c:518:10: error: implicit declaration of function ‘readl’ [-Werror=implicit-function-declaration] value = readl(bufcfg); ^ drivers/pinctrl/intel/pinctrl-merrifield.c: In function ‘mrfld_update_bufcfg’: drivers/pinctrl/intel/pinctrl-merrifield.c:575:2: error: implicit declaration of function ‘writel’ [-Werror=implicit-function-declaration] writel(value, bufcfg); ^ cc1: some warnings being treated as errors Add header to the top of the module. Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support") Signed-off-by: Andy Shevchenko Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-merrifield.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pinctrl/intel/pinctrl-merrifield.c b/drivers/pinctrl/intel/pinctrl-merrifield.c index eb4990ff26ca..7fb765642ee7 100644 --- a/drivers/pinctrl/intel/pinctrl-merrifield.c +++ b/drivers/pinctrl/intel/pinctrl-merrifield.c @@ -11,6 +11,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3 From b06bc7ec4da26dccda040a65896ea22ee6638a7a Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 13 Jul 2016 09:10:31 +0100 Subject: drm/i915: Flush GT idle status upon reset Upon resetting the GPU, we force the engines to be idle by clearing their request lists. However, I neglected to clear the GT active status and so the next request following the reset was not marking the device as busy again. (We had to wait until any outstanding retire worker finally ran and cleared the active status.) Fixes: 67d97da34917 ("drm/i915: Only start retire worker when idle") Testcase: igt/pm_rps/reset Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Link: http://patchwork.freedesktop.org/patch/msgid/1468397438-21226-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen (cherry picked from commit b913b33c43db849778f044d4b9e74b167898a9bc) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 11681501d7b1..27ef10e4923e 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3169,6 +3169,8 @@ static void i915_gem_reset_engine_cleanup(struct intel_engine_cs *engine) } intel_ring_init_seqno(engine, engine->last_submitted_seqno); + + engine->i915->gt.active_engines &= ~intel_engine_flag(engine); } void i915_gem_reset(struct drm_device *dev) @@ -3186,6 +3188,7 @@ void i915_gem_reset(struct drm_device *dev) for_each_engine(engine, dev_priv) i915_gem_reset_engine_cleanup(engine); + mod_delayed_work(dev_priv->wq, &dev_priv->gt.idle_work, 0); i915_gem_context_reset(dev); -- cgit v1.2.3 From c2a4c5b75a717db8bbe1c2fad6473063a7d2f930 Mon Sep 17 00:00:00 2001 From: Jay Cornwall Date: Wed, 3 Aug 2016 13:39:42 -0500 Subject: drm/amdgpu: Fix memory trashing if UVD ring test fails MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fence_put was called on an uninitialized variable. Reviewed-by: Christian König Signed-off-by: Jay Cornwall Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c index b11f4e8868d7..4aa993d19018 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c @@ -1187,7 +1187,8 @@ int amdgpu_uvd_ring_test_ib(struct amdgpu_ring *ring, long timeout) r = 0; } -error: fence_put(fence); + +error: return r; } -- cgit v1.2.3 From 18b43e89d295cc65151c505c643c98fb2c320e59 Mon Sep 17 00:00:00 2001 From: Daniel Mentz Date: Thu, 4 Aug 2016 17:56:53 -0700 Subject: ARC: Call trace_hardirqs_on() before enabling irqs trace_hardirqs_on_caller() in lockdep.c expects to be called before, not after interrupts are actually enabled. The following comment in kernel/locking/lockdep.c substantiates this claim: " /* * We're enabling irqs and according to our state above irqs weren't * already enabled, yet we find the hardware thinks they are in fact * enabled.. someone messed up their IRQ state tracing. */ " An example can be found in include/linux/irqflags.h: do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0) Without this change, we hit the following DEBUG_LOCKS_WARN_ON. [ 7.760000] ------------[ cut here ]------------ [ 7.760000] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2711 resume_user_mode_begin+0x48/0xf0 [ 7.770000] DEBUG_LOCKS_WARN_ON(!irqs_disabled()) [ 7.780000] Modules linked in: [ 7.780000] CPU: 0 PID: 1 Comm: init Not tainted 4.7.0-00003-gc668bb9-dirty #366 [ 7.790000] [ 7.790000] Stack Trace: [ 7.790000] arc_unwind_core.constprop.1+0xa4/0x118 [ 7.800000] warn_slowpath_fmt+0x72/0x158 [ 7.800000] resume_user_mode_begin+0x48/0xf0 [ 7.810000] ---[ end trace 6f6a7a8fae20d2f0 ]--- Signed-off-by: Daniel Mentz Cc: Signed-off-by: Vineet Gupta --- arch/arc/include/asm/irqflags-compact.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arc/include/asm/irqflags-compact.h b/arch/arc/include/asm/irqflags-compact.h index c1d36458bfb7..4c6eed80cd8b 100644 --- a/arch/arc/include/asm/irqflags-compact.h +++ b/arch/arc/include/asm/irqflags-compact.h @@ -188,10 +188,10 @@ static inline int arch_irqs_disabled(void) .endm .macro IRQ_ENABLE scratch + TRACE_ASM_IRQ_ENABLE lr \scratch, [status32] or \scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK) flag \scratch - TRACE_ASM_IRQ_ENABLE .endm #endif /* __ASSEMBLY__ */ -- cgit v1.2.3 From 45c3b08a117e2232fc8d7b9e849ead36386f4f96 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 13 Jun 2016 16:38:27 +0200 Subject: ARC: Elide redundant setup of DMA callbacks For resources shared by all cores such as SLC and IOC, only the master core needs to do any setups / enabling / disabling etc. Cc: Signed-off-by: Vineet Gupta --- arch/arc/mm/cache.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 5a294b2c3cb3..0b10efe3a6a7 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -921,6 +921,15 @@ void arc_cache_init(void) printk(arc_cache_mumbojumbo(0, str, sizeof(str))); + /* + * Only master CPU needs to execute rest of function: + * - Assume SMP so all cores will have same cache config so + * any geomtry checks will be same for all + * - IOC setup / dma callbacks only need to be setup once + */ + if (cpu) + return; + if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) { struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache; -- cgit v1.2.3 From fae82e59d2ff7d789878c9eb3a007ae7eb6641b2 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 16 Jul 2016 18:42:36 +0100 Subject: drm/i915: Handle ENOSPC after failing to insert a mappable node Even after adding individual page support for GTT mmaping, we can still fail to find any space within the mappable region, and drm_mm_insert_node() will then report ENOSPC. We have to then handle this error by using the shmem access to the pages. Fixes: b50a53715f09 ("drm/i915: Support for pread/pwrite ... objects") Testcase: igt/gem_concurrent_blit Signed-off-by: Chris Wilson Cc: Ankitprasad Sharma Cc: Tvrtko Ursulin (cherry picked from commit d1054ee492a89b134fb0ac527b0714c277ae9c0f) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 27ef10e4923e..aceaad0c2f18 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1306,7 +1306,7 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, * textures). Fallback to the shmem path in that case. */ } - if (ret == -EFAULT) { + if (ret == -EFAULT || ret == -ENOSPC) { if (obj->phys_handle) ret = i915_gem_phys_pwrite(obj, args, file); else if (i915_gem_object_has_struct_page(obj)) -- cgit v1.2.3 From 5728e0de741a3581e9900c5cbee3a51425daf211 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 12 Jul 2016 15:59:28 +0300 Subject: drm/i915: Fix iboost setting for DDI with 4 lanes on SKL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bspec says: "For DDIA with x4 capability (DDI_BUF_CTL DDIA Lane Capability Control = DDIA x4), the I_boost value has to be programmed in both tx_blnclegsctl_0 and tx_blnclegsctl_4." Currently we only program tx_blnclegsctl_0. Let's do the other one as well. Cc: stable@vger.kernel.org Fixes: f8896f5d58e6 ("drm/i915/skl: Buffer translation improvements") Cc: David Weinehall Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-2-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: David Weinehall (cherry picked from commit a7d8dbc07c8f0faaace983b1e4c6e9495dd0aa75) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_ddi.c | 36 +++++++++++++++++++++++------------- 2 files changed, 24 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index ce14fe09d962..5c06413ae0e6 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1536,6 +1536,7 @@ enum skl_disp_power_wells { #define BALANCE_LEG_MASK(port) (7<<(8+3*(port))) /* Balance leg disable bits */ #define BALANCE_LEG_DISABLE_SHIFT 23 +#define BALANCE_LEG_DISABLE(port) (1 << (23 + (port))) /* * Fence registers diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index dd1d6fe12297..75354cd9bbab 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1379,14 +1379,30 @@ void intel_ddi_disable_pipe_clock(struct intel_crtc *intel_crtc) TRANS_CLK_SEL_DISABLED); } -static void skl_ddi_set_iboost(struct drm_i915_private *dev_priv, - u32 level, enum port port, int type) +static void _skl_ddi_set_iboost(struct drm_i915_private *dev_priv, + enum port port, uint8_t iboost) { + u32 tmp; + + tmp = I915_READ(DISPIO_CR_TX_BMU_CR0); + tmp &= ~(BALANCE_LEG_MASK(port) | BALANCE_LEG_DISABLE(port)); + if (iboost) + tmp |= iboost << BALANCE_LEG_SHIFT(port); + else + tmp |= BALANCE_LEG_DISABLE(port); + I915_WRITE(DISPIO_CR_TX_BMU_CR0, tmp); +} + +static void skl_ddi_set_iboost(struct intel_encoder *encoder, u32 level) +{ + struct intel_digital_port *intel_dig_port = enc_to_dig_port(&encoder->base); + struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev); + enum port port = intel_dig_port->port; + int type = encoder->type; const struct ddi_buf_trans *ddi_translations; uint8_t iboost; uint8_t dp_iboost, hdmi_iboost; int n_entries; - u32 reg; /* VBT may override standard boost values */ dp_iboost = dev_priv->vbt.ddi_port_info[port].dp_boost_level; @@ -1428,16 +1444,10 @@ static void skl_ddi_set_iboost(struct drm_i915_private *dev_priv, return; } - reg = I915_READ(DISPIO_CR_TX_BMU_CR0); - reg &= ~BALANCE_LEG_MASK(port); - reg &= ~(1 << (BALANCE_LEG_DISABLE_SHIFT + port)); - - if (iboost) - reg |= iboost << BALANCE_LEG_SHIFT(port); - else - reg |= 1 << (BALANCE_LEG_DISABLE_SHIFT + port); + _skl_ddi_set_iboost(dev_priv, port, iboost); - I915_WRITE(DISPIO_CR_TX_BMU_CR0, reg); + if (port == PORT_A && intel_dig_port->max_lanes == 4) + _skl_ddi_set_iboost(dev_priv, PORT_E, iboost); } static void bxt_ddi_vswing_sequence(struct drm_i915_private *dev_priv, @@ -1568,7 +1578,7 @@ uint32_t ddi_signal_levels(struct intel_dp *intel_dp) level = translate_signal_level(signal_levels); if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) - skl_ddi_set_iboost(dev_priv, level, port, encoder->type); + skl_ddi_set_iboost(encoder, level); else if (IS_BROXTON(dev_priv)) bxt_ddi_vswing_sequence(dev_priv, level, port, encoder->type); -- cgit v1.2.3 From 7ff9a55614712adf13ce7990565be0263e620f5e Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 12 Jul 2016 15:59:30 +0300 Subject: drm/i915: Program iboost settings for HDMI/DVI on SKL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently we fail to program the iboost stuff for HDMI/DVI. Let's remedy that. Cc: stable@vger.kernel.org Fixes: f8896f5d58e6 ("drm/i915/skl: Buffer translation improvements") Cc: David Weinehall Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-4-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: David Weinehall (cherry picked from commit 8d8bb85eb7d859aa9bbe36e588690a1d22af7608) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_ddi.c | 51 +++++++++++++++++++++++++++++++--------- 1 file changed, 40 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 75354cd9bbab..415c061e2969 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -388,6 +388,40 @@ skl_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int *n_entries) } } +static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port port) +{ + int n_hdmi_entries; + int hdmi_level; + int hdmi_default_entry; + + hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift; + + if (IS_BROXTON(dev_priv)) + return hdmi_level; + + if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) { + skl_get_buf_trans_hdmi(dev_priv, &n_hdmi_entries); + hdmi_default_entry = 8; + } else if (IS_BROADWELL(dev_priv)) { + n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); + hdmi_default_entry = 7; + } else if (IS_HASWELL(dev_priv)) { + n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi); + hdmi_default_entry = 6; + } else { + WARN(1, "ddi translation table missing\n"); + n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); + hdmi_default_entry = 7; + } + + /* Choose a good default if VBT is badly populated */ + if (hdmi_level == HDMI_LEVEL_SHIFT_UNKNOWN || + hdmi_level >= n_hdmi_entries) + hdmi_level = hdmi_default_entry; + + return hdmi_level; +} + /* * Starting with Haswell, DDI port buffers must be programmed with correct * values in advance. The buffer values are different for FDI and DP modes, @@ -399,7 +433,7 @@ void intel_prepare_ddi_buffer(struct intel_encoder *encoder) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); u32 iboost_bit = 0; - int i, n_hdmi_entries, n_dp_entries, n_edp_entries, hdmi_default_entry, + int i, n_hdmi_entries, n_dp_entries, n_edp_entries, size; int hdmi_level; enum port port; @@ -410,7 +444,7 @@ void intel_prepare_ddi_buffer(struct intel_encoder *encoder) const struct ddi_buf_trans *ddi_translations; port = intel_ddi_get_encoder_port(encoder); - hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift; + hdmi_level = intel_ddi_hdmi_level(dev_priv, port); if (IS_BROXTON(dev_priv)) { if (encoder->type != INTEL_OUTPUT_HDMI) @@ -430,7 +464,6 @@ void intel_prepare_ddi_buffer(struct intel_encoder *encoder) skl_get_buf_trans_edp(dev_priv, &n_edp_entries); ddi_translations_hdmi = skl_get_buf_trans_hdmi(dev_priv, &n_hdmi_entries); - hdmi_default_entry = 8; /* If we're boosting the current, set bit 31 of trans1 */ if (dev_priv->vbt.ddi_port_info[port].hdmi_boost_level || dev_priv->vbt.ddi_port_info[port].dp_boost_level) @@ -456,7 +489,6 @@ void intel_prepare_ddi_buffer(struct intel_encoder *encoder) n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp); n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); - hdmi_default_entry = 7; } else if (IS_HASWELL(dev_priv)) { ddi_translations_fdi = hsw_ddi_translations_fdi; ddi_translations_dp = hsw_ddi_translations_dp; @@ -464,7 +496,6 @@ void intel_prepare_ddi_buffer(struct intel_encoder *encoder) ddi_translations_hdmi = hsw_ddi_translations_hdmi; n_dp_entries = n_edp_entries = ARRAY_SIZE(hsw_ddi_translations_dp); n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi); - hdmi_default_entry = 6; } else { WARN(1, "ddi translation table missing\n"); ddi_translations_edp = bdw_ddi_translations_dp; @@ -474,7 +505,6 @@ void intel_prepare_ddi_buffer(struct intel_encoder *encoder) n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp); n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp); n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); - hdmi_default_entry = 7; } switch (encoder->type) { @@ -505,11 +535,6 @@ void intel_prepare_ddi_buffer(struct intel_encoder *encoder) if (encoder->type != INTEL_OUTPUT_HDMI) return; - /* Choose a good default if VBT is badly populated */ - if (hdmi_level == HDMI_LEVEL_SHIFT_UNKNOWN || - hdmi_level >= n_hdmi_entries) - hdmi_level = hdmi_default_entry; - /* Entry 9 is for HDMI: */ I915_WRITE(DDI_BUF_TRANS_LO(port, i), ddi_translations_hdmi[hdmi_level].trans1 | iboost_bit); @@ -1647,6 +1672,10 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder) intel_dp_stop_link_train(intel_dp); } else if (type == INTEL_OUTPUT_HDMI) { struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); + int level = intel_ddi_hdmi_level(dev_priv, port); + + if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) + skl_ddi_set_iboost(intel_encoder, level); intel_hdmi->set_infoframes(encoder, crtc->config->has_hdmi_sink, -- cgit v1.2.3 From d8b6161f7294b63180da443c9ff48c7efce182eb Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 2 Aug 2016 14:07:33 +0300 Subject: drm/i915: Clean up the extra RPM ref on CHV with i915.enable_rc6=0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove the CHV early bail out from intel_cleanup_gt_powersave() so that we'll clean up the extra RPM reference held due to i915.enable_rc6=0. Cc: Imre Deak Fixes: b268c699aca5 ("drm/i915: refactor RPM disabling due to RC6 being disabled") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1470136053-23276-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak (cherry picked from commit 8dac1e1f2068321fb4b7062d3c5408971f7a7e35) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index f4f3fcc8b3be..1ff5c63f1728 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -6573,9 +6573,7 @@ void intel_init_gt_powersave(struct drm_i915_private *dev_priv) void intel_cleanup_gt_powersave(struct drm_i915_private *dev_priv) { - if (IS_CHERRYVIEW(dev_priv)) - return; - else if (IS_VALLEYVIEW(dev_priv)) + if (IS_VALLEYVIEW(dev_priv)) valleyview_cleanup_gt_powersave(dev_priv); if (!i915.enable_rc6) -- cgit v1.2.3 From 0a491b96aa59a7232f6c1a81414aa57fb8de8594 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 4 Aug 2016 08:43:53 +0100 Subject: drm/i915/fbc: FBC causes display flicker when VT-d is enabled on Skylake MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Erratum SKL075: Display Flicker May Occur When Both VT-d And FBC Are Enabled "Display flickering may occur when both FBC (Frame Buffer Compression) and VT - d (Intel® Virtualization Technology for Directed I/O) are enabled and in use by the display controller." Ville found the w/a name in the database: WaFbcTurnOffFbcWhenHyperVisorIsUsed:skl,bxt and also dug out that it affects Broxton. v2: Log when the quirk is applied. v3: Ensure i915.enable_fbc is false when !HAS_FBC() v4: Fix function name after rebase v5: Add Broxton to the workaround Note for backporting to stable, we need to add #define mkwrite_device_info(ptr) \ ((struct intel_device_info *)INTEL_INFO(ptr)) Signed-off-by: Chris Wilson Cc: Paulo Zanoni Cc: Ville Syrjälä Reviewed-by: Ville Syrjälä Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/1470296633-20388-1-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit 36dbc4d76918d7557b686f807106dcc799174b12) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_fbc.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_fbc.c b/drivers/gpu/drm/i915/intel_fbc.c index 6a7ad3ed1463..3836a1c79714 100644 --- a/drivers/gpu/drm/i915/intel_fbc.c +++ b/drivers/gpu/drm/i915/intel_fbc.c @@ -1230,12 +1230,29 @@ static int intel_sanitize_fbc_option(struct drm_i915_private *dev_priv) if (i915.enable_fbc >= 0) return !!i915.enable_fbc; + if (!HAS_FBC(dev_priv)) + return 0; + if (IS_BROADWELL(dev_priv)) return 1; return 0; } +static bool need_fbc_vtd_wa(struct drm_i915_private *dev_priv) +{ +#ifdef CONFIG_INTEL_IOMMU + /* WaFbcTurnOffFbcWhenHyperVisorIsUsed:skl,bxt */ + if (intel_iommu_gfx_mapped && + (IS_SKYLAKE(dev_priv) || IS_BROXTON(dev_priv))) { + DRM_INFO("Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled\n"); + return true; + } +#endif + + return false; +} + /** * intel_fbc_init - Initialize FBC * @dev_priv: the i915 device @@ -1253,6 +1270,9 @@ void intel_fbc_init(struct drm_i915_private *dev_priv) fbc->active = false; fbc->work.scheduled = false; + if (need_fbc_vtd_wa(dev_priv)) + mkwrite_device_info(dev_priv)->has_fbc = false; + i915.enable_fbc = intel_sanitize_fbc_option(dev_priv); DRM_DEBUG_KMS("Sanitized enable_fbc value: %d\n", i915.enable_fbc); -- cgit v1.2.3 From 2ca17b87e85ffada1e3da941d5c1c9ee4f56ca9f Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 4 Aug 2016 09:09:53 +0100 Subject: drm/i915: Add missing rpm wakelock to GGTT pread Joonas spotted a discrepancy between the pwrite and pread ioctls, in that pwrite takes the rpm wakelock around its GGTT access, The wakelock is required in order for the GTT to function. In disregard for the current convention, we take the rpm wakelock around the access itself rather than around the struct_mutex as the nesting is not strictly required and such ordering will one day be fixed by explicitly noting the barrier dependencies between the GGTT and rpm. Fixes: b50a53715f09 ("drm/i915: Support for pread/pwrite ...") Reported-by: Joonas Lahtinen Signed-off-by: Chris Wilson Cc: Ankitprasad Sharma Cc: Tvrtko Ursulin Cc: Joonas Lahtinen Cc: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1470298193-21765-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen (cherry picked from commit 1dd5b6f2020389e75bb3d269c038497f065e68c9) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index aceaad0c2f18..a77ce9983f69 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -879,9 +879,12 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data, ret = i915_gem_shmem_pread(dev, obj, args, file); /* pread for non shmem backed objects */ - if (ret == -EFAULT || ret == -ENODEV) + if (ret == -EFAULT || ret == -ENODEV) { + intel_runtime_pm_get(to_i915(dev)); ret = i915_gem_gtt_pread(dev, obj, args->size, args->offset, args->data_ptr); + intel_runtime_pm_put(to_i915(dev)); + } out: drm_gem_object_unreference(&obj->base); -- cgit v1.2.3 From 3cffb0a44750726cdc1cc07399efe3cbb45e028b Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 3 Aug 2016 17:09:00 +0100 Subject: drm/i915: Acquire audio powerwell for HD-Audio registers On Haswell/Broadwell, the HD-Audio block is inside the HDMI/display power well and so the sna-hda audio codec acquires the display power well while it is operational. However, Skylake separates the powerwells again, but yet we still need the audio powerwell to setup the registers. (But then the hardware uses those registers even while powered off???) Acquiring the powerwell around setting the chicken bits when setting up the audio channel does at least silence the WARNs from touching our registers whilst unpowered. We silence our own test cases, but maybe there is a latent bug in using the audio channel? v2: Grab both rpm wakelock and audio wakelock Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96214 Fixes: 03b135cebc47 "ALSA: hda - remove dependency on i915 power well for SKL") Signed-off-by: Chris Wilson Cc: Libin Yang Cc: Takashi Iwai Cc: Marius Vlad Tested-by: Hans de Goede Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/1470240540-29004-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Daniel Vetter (cherry picked from commit d838a110f0b310d408ebe6b5a97e36ec27555ebf) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_audio.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c index 6700a7be7f78..d32f586f9c05 100644 --- a/drivers/gpu/drm/i915/intel_audio.c +++ b/drivers/gpu/drm/i915/intel_audio.c @@ -600,6 +600,8 @@ static void i915_audio_component_codec_wake_override(struct device *dev, if (!IS_SKYLAKE(dev_priv) && !IS_KABYLAKE(dev_priv)) return; + i915_audio_component_get_power(dev); + /* * Enable/disable generating the codec wake signal, overriding the * internal logic to generate the codec wake to controller. @@ -615,6 +617,8 @@ static void i915_audio_component_codec_wake_override(struct device *dev, I915_WRITE(HSW_AUD_CHICKENBIT, tmp); usleep_range(1000, 1500); } + + i915_audio_component_put_power(dev); } /* Get CDCLK in kHz */ @@ -648,6 +652,7 @@ static int i915_audio_component_sync_audio_rate(struct device *dev, !IS_HASWELL(dev_priv)) return 0; + i915_audio_component_get_power(dev); mutex_lock(&dev_priv->av_mutex); /* 1. get the pipe */ intel_encoder = dev_priv->dig_port_map[port]; @@ -698,6 +703,7 @@ static int i915_audio_component_sync_audio_rate(struct device *dev, unlock: mutex_unlock(&dev_priv->av_mutex); + i915_audio_component_put_power(dev); return err; } -- cgit v1.2.3 From 58e311b09c319183254d9220c50a533e7157c9ab Mon Sep 17 00:00:00 2001 From: Matt Roper Date: Thu, 4 Aug 2016 14:08:00 -0700 Subject: drm/i915/gen9: Give one extra block per line for SKL plane WM calculations The bspec was updated a couple weeks ago to add an extra block per line to plane watermark calculations for linear pixel formats. Bspec update 115327 description: "Gen9+ - Updated the plane blocks per line calculation for linear cases. Adds +1 for all linear cases to handle the non-block aligned stride cases." Cc: Lyude Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Matt Roper Link: http://patchwork.freedesktop.org/patch/msgid/1470344880-27394-1-git-send-email-matthew.d.roper@intel.com Reviewed-by: Lyude (cherry picked from commit 055c3ff69d440928964228455ec29b071258d5fa) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 1ff5c63f1728..3c7b382d5788 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3344,6 +3344,8 @@ static uint32_t skl_wm_method2(uint32_t pixel_rate, uint32_t pipe_htotal, plane_bytes_per_line *= 4; plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512); plane_blocks_per_line /= 4; + } else if (tiling == DRM_FORMAT_MOD_NONE) { + plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512) + 1; } else { plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512); } -- cgit v1.2.3 From 85bf59d188721dca37bc8276457e68351213f38f Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 2 Aug 2016 15:21:57 +0300 Subject: drm/i915: Fix iboost setting for SKL Y/U DP DDI buffer translation entry 2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The spec was recently fixed to have the correct iboost setting for the SKL Y/U DP DDI buffer translation table entry 2. Update our tables to match. Cc: David Weinehall Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1470140517-13011-1-git-send-email-ville.syrjala@linux.intel.com Cc: stable@vger.kernel.org Reviewed-by: David Weinehall (cherry picked from commit 5ac9056753e79ac5ad1ccc3c99b311688e46e8c9) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_ddi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 415c061e2969..1a7efac65fd5 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -145,7 +145,7 @@ static const struct ddi_buf_trans skl_ddi_translations_dp[] = { static const struct ddi_buf_trans skl_u_ddi_translations_dp[] = { { 0x0000201B, 0x000000A2, 0x0 }, { 0x00005012, 0x00000088, 0x0 }, - { 0x80007011, 0x000000CD, 0x0 }, + { 0x80007011, 0x000000CD, 0x1 }, { 0x80009010, 0x000000C0, 0x1 }, { 0x0000201B, 0x0000009D, 0x0 }, { 0x80005012, 0x000000C0, 0x1 }, @@ -158,7 +158,7 @@ static const struct ddi_buf_trans skl_u_ddi_translations_dp[] = { static const struct ddi_buf_trans skl_y_ddi_translations_dp[] = { { 0x00000018, 0x000000A2, 0x0 }, { 0x00005012, 0x00000088, 0x0 }, - { 0x80007011, 0x000000CD, 0x0 }, + { 0x80007011, 0x000000CD, 0x3 }, { 0x80009010, 0x000000C0, 0x3 }, { 0x00000018, 0x0000009D, 0x0 }, { 0x80005012, 0x000000C0, 0x3 }, -- cgit v1.2.3 From bf74c93cd7696793eceadaf02b176500523e0b93 Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Tue, 2 Aug 2016 09:36:53 +0100 Subject: drm/i915: fix WaInsertDummyPushConstPs As pointed out by Chris Harris, we are using the wrong WA name, it should in fact be WaToEnableHwFixForPushConstHWBug, also it should be applied from C0 onwards for both BXT and KBL. Fixes: 7b9005cd45f3 ("drm/i915: Add WaInsertDummyPushConstP for bxt and kbl") Cc: Chris Harris Cc: Mika Kuoppala Reported-by: Chris Harris Signed-off-by: Matthew Auld Reviewed-by: Arun Siluvery Signed-off-by: Joonas Lahtinen Link: http://patchwork.freedesktop.org/patch/msgid/1470127013-29653-1-git-send-email-matthew.auld@intel.com (cherry picked from commit 575e3ccbce4582395d57612b289178bad4af3be8) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_ringbuffer.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index cca7792f26d5..1d3161bbea24 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -1178,8 +1178,8 @@ static int bxt_init_workarounds(struct intel_engine_cs *engine) I915_WRITE(GEN8_L3SQCREG1, L3_GENERAL_PRIO_CREDITS(62) | L3_HIGH_PRIO_CREDITS(2)); - /* WaInsertDummyPushConstPs:bxt */ - if (IS_BXT_REVID(dev_priv, 0, BXT_REVID_B0)) + /* WaToEnableHwFixForPushConstHWBug:bxt */ + if (IS_BXT_REVID(dev_priv, BXT_REVID_C0, REVID_FOREVER)) WA_SET_BIT_MASKED(COMMON_SLICE_CHICKEN2, GEN8_SBE_DISABLE_REPLAY_BUF_OPTIMIZATION); @@ -1222,8 +1222,8 @@ static int kbl_init_workarounds(struct intel_engine_cs *engine) I915_WRITE(GEN8_L3SQCREG4, I915_READ(GEN8_L3SQCREG4) | GEN8_LQSC_RO_PERF_DIS); - /* WaInsertDummyPushConstPs:kbl */ - if (IS_KBL_REVID(dev_priv, 0, KBL_REVID_B0)) + /* WaToEnableHwFixForPushConstHWBug:kbl */ + if (IS_KBL_REVID(dev_priv, KBL_REVID_C0, REVID_FOREVER)) WA_SET_BIT_MASKED(COMMON_SLICE_CHICKEN2, GEN8_SBE_DISABLE_REPLAY_BUF_OPTIMIZATION); -- cgit v1.2.3 From 3871f42a57efcdc6a9da751a8cb6fa196c212289 Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Fri, 5 Aug 2016 19:04:40 +0100 Subject: drm/i915: fix aliasing_ppgtt leak In i915_ggtt_cleanup_hw we need to remember to free aliasing_ppgtt. This fixes the following kmemleak message: unreferenced object 0xffff880213cca000 (size 8192): comm "modprobe", pid 1298, jiffies 4294745402 (age 703.930s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kmemleak_alloc+0x4e/0xb0 [] kmem_cache_alloc_trace+0x142/0x1d0 [] i915_gem_init_ggtt+0x10f/0x210 [i915] [] i915_gem_init+0x5b/0xd0 [i915] [] i915_driver_load+0x97a/0x1460 [i915] [] i915_pci_probe+0x4f/0x70 [i915] [] local_pci_probe+0x45/0xa0 [] pci_device_probe+0x103/0x150 [] driver_probe_device+0x22c/0x440 [] __driver_attach+0xd1/0xf0 [] bus_for_each_dev+0x6c/0xc0 [] driver_attach+0x1e/0x20 [] bus_add_driver+0x1c3/0x280 [] driver_register+0x60/0xe0 [] __pci_register_driver+0x4c/0x50 [] 0xffffffffa013605b Signed-off-by: Matthew Auld Reviewed-by: Chris Wilson Fixes: b18b6bde300e ("drm/i915/bdw: Free PPGTT struct") Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1470420280-21417-1-git-send-email-matthew.auld@intel.com (cherry picked from commit cb7f27601c81a1e0454e9461e96f65b31fafbea0) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_gtt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 10f1e32767e6..7a30af79d799 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -2873,6 +2873,7 @@ void i915_ggtt_cleanup_hw(struct drm_device *dev) struct i915_hw_ppgtt *ppgtt = dev_priv->mm.aliasing_ppgtt; ppgtt->base.cleanup(&ppgtt->base); + kfree(ppgtt); } i915_gem_cleanup_stolen(dev); -- cgit v1.2.3 From dfa2997055659b4e706a85fba481050cc7e7ad82 Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Fri, 5 Aug 2016 23:28:27 +0300 Subject: drm/i915: Fix modeset handling during gpu reset, v5. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This function would call drm_modeset_lock_all, while the suspend/resume functions already have their own locking. Fix this by factoring out __intel_display_resume, and calling the atomic helpers for duplicating atomic state and disabling all crtc's during suspend. Changes since v1: - Deal with -EDEADLK right after lock_all and clean up calls to hw readout. - Always take all modeset locks so updates during gpu reset are blocked. Changes since v2: - Fix deadlock in intel_update_primary_planes. - Move WARN_ON(EDEADLK) to __intel_display_resume. - pctx -> ctx - only call __intel_display_resume on success in intel_display_resume. Changes since v3: - Rebase on top of dev_priv -> dev change. - Use drm_modeset_lock_all_ctx instead of drm_modeset_lock_all. Changes since v4 [by vsyrjala]: - Deal with skip_intermediate_wm - Update comment w.r.t. mode_config.mutex vs. ->detect() - Rebase due to INTEL_GEN() etc. Signed-off-by: Maarten Lankhorst Fixes: e2c8b8701e2d ("drm/i915: Use atomic helpers for suspend, v2.") Cc: stable@vger.kernel.org Tested-by: Ville Syrjälä Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1470428910-12125-2-git-send-email-ville.syrjala@linux.intel.com (cherry picked from commit 739748939974791b84629a8790527a16f76873a4) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_display.c | 170 ++++++++++++++++++++++------------- 2 files changed, 111 insertions(+), 60 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 21f939074abc..20fe9d52e256 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1854,6 +1854,7 @@ struct drm_i915_private { enum modeset_restore modeset_restore; struct mutex modeset_restore_lock; struct drm_atomic_state *modeset_restore_state; + struct drm_modeset_acquire_ctx reset_ctx; struct list_head vm_list; /* Global list of all address spaces */ struct i915_ggtt ggtt; /* VM representing the global address space */ diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index c457eed76f1f..fbb8574fef66 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3093,40 +3093,110 @@ static void intel_update_primary_planes(struct drm_device *dev) for_each_crtc(dev, crtc) { struct intel_plane *plane = to_intel_plane(crtc->primary); - struct intel_plane_state *plane_state; - - drm_modeset_lock_crtc(crtc, &plane->base); - plane_state = to_intel_plane_state(plane->base.state); + struct intel_plane_state *plane_state = + to_intel_plane_state(plane->base.state); if (plane_state->visible) plane->update_plane(&plane->base, to_intel_crtc_state(crtc->state), plane_state); + } +} + +static int +__intel_display_resume(struct drm_device *dev, + struct drm_atomic_state *state) +{ + struct drm_crtc_state *crtc_state; + struct drm_crtc *crtc; + int i, ret; + + intel_modeset_setup_hw_state(dev); + i915_redisable_vga(dev); - drm_modeset_unlock_crtc(crtc); + if (!state) + return 0; + + for_each_crtc_in_state(state, crtc, crtc_state, i) { + /* + * Force recalculation even if we restore + * current state. With fast modeset this may not result + * in a modeset when the state is compatible. + */ + crtc_state->mode_changed = true; } + + /* ignore any reset values/BIOS leftovers in the WM registers */ + to_intel_atomic_state(state)->skip_intermediate_wm = true; + + ret = drm_atomic_commit(state); + + WARN_ON(ret == -EDEADLK); + return ret; } void intel_prepare_reset(struct drm_i915_private *dev_priv) { + struct drm_device *dev = &dev_priv->drm; + struct drm_modeset_acquire_ctx *ctx = &dev_priv->reset_ctx; + struct drm_atomic_state *state; + int ret; + /* no reset support for gen2 */ if (IS_GEN2(dev_priv)) return; - /* reset doesn't touch the display */ + /* + * Need mode_config.mutex so that we don't + * trample ongoing ->detect() and whatnot. + */ + mutex_lock(&dev->mode_config.mutex); + drm_modeset_acquire_init(ctx, 0); + while (1) { + ret = drm_modeset_lock_all_ctx(dev, ctx); + if (ret != -EDEADLK) + break; + + drm_modeset_backoff(ctx); + } + + /* reset doesn't touch the display, but flips might get nuked anyway, */ if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv)) return; - drm_modeset_lock_all(&dev_priv->drm); /* * Disabling the crtcs gracefully seems nicer. Also the * g33 docs say we should at least disable all the planes. */ - intel_display_suspend(&dev_priv->drm); + state = drm_atomic_helper_duplicate_state(dev, ctx); + if (IS_ERR(state)) { + ret = PTR_ERR(state); + state = NULL; + DRM_ERROR("Duplicating state failed with %i\n", ret); + goto err; + } + + ret = drm_atomic_helper_disable_all(dev, ctx); + if (ret) { + DRM_ERROR("Suspending crtc's failed with %i\n", ret); + goto err; + } + + dev_priv->modeset_restore_state = state; + state->acquire_ctx = ctx; + return; + +err: + drm_atomic_state_free(state); } void intel_finish_reset(struct drm_i915_private *dev_priv) { + struct drm_device *dev = &dev_priv->drm; + struct drm_modeset_acquire_ctx *ctx = &dev_priv->reset_ctx; + struct drm_atomic_state *state = dev_priv->modeset_restore_state; + int ret; + /* * Flips in the rings will be nuked by the reset, * so complete all pending flips so that user space @@ -3138,6 +3208,8 @@ void intel_finish_reset(struct drm_i915_private *dev_priv) if (IS_GEN2(dev_priv)) return; + dev_priv->modeset_restore_state = NULL; + /* reset doesn't touch the display */ if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv)) { /* @@ -3149,29 +3221,32 @@ void intel_finish_reset(struct drm_i915_private *dev_priv) * FIXME: Atomic will make this obsolete since we won't schedule * CS-based flips (which might get lost in gpu resets) any more. */ - intel_update_primary_planes(&dev_priv->drm); - return; - } - - /* - * The display has been reset as well, - * so need a full re-initialization. - */ - intel_runtime_pm_disable_interrupts(dev_priv); - intel_runtime_pm_enable_interrupts(dev_priv); + intel_update_primary_planes(dev); + } else { + /* + * The display has been reset as well, + * so need a full re-initialization. + */ + intel_runtime_pm_disable_interrupts(dev_priv); + intel_runtime_pm_enable_interrupts(dev_priv); - intel_modeset_init_hw(&dev_priv->drm); + intel_modeset_init_hw(dev); - spin_lock_irq(&dev_priv->irq_lock); - if (dev_priv->display.hpd_irq_setup) - dev_priv->display.hpd_irq_setup(dev_priv); - spin_unlock_irq(&dev_priv->irq_lock); + spin_lock_irq(&dev_priv->irq_lock); + if (dev_priv->display.hpd_irq_setup) + dev_priv->display.hpd_irq_setup(dev_priv); + spin_unlock_irq(&dev_priv->irq_lock); - intel_display_resume(&dev_priv->drm); + ret = __intel_display_resume(dev, state); + if (ret) + DRM_ERROR("Restoring old state failed with %i\n", ret); - intel_hpd_init(dev_priv); + intel_hpd_init(dev_priv); + } - drm_modeset_unlock_all(&dev_priv->drm); + drm_modeset_drop_locks(ctx); + drm_modeset_acquire_fini(ctx); + mutex_unlock(&dev->mode_config.mutex); } static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc) @@ -16174,9 +16249,10 @@ void intel_display_resume(struct drm_device *dev) struct drm_atomic_state *state = dev_priv->modeset_restore_state; struct drm_modeset_acquire_ctx ctx; int ret; - bool setup = false; dev_priv->modeset_restore_state = NULL; + if (state) + state->acquire_ctx = &ctx; /* * This is a cludge because with real atomic modeset mode_config.mutex @@ -16187,43 +16263,17 @@ void intel_display_resume(struct drm_device *dev) mutex_lock(&dev->mode_config.mutex); drm_modeset_acquire_init(&ctx, 0); -retry: - ret = drm_modeset_lock_all_ctx(dev, &ctx); - - if (ret == 0 && !setup) { - setup = true; - - intel_modeset_setup_hw_state(dev); - i915_redisable_vga(dev); - } - - if (ret == 0 && state) { - struct drm_crtc_state *crtc_state; - struct drm_crtc *crtc; - int i; - - state->acquire_ctx = &ctx; - - /* ignore any reset values/BIOS leftovers in the WM registers */ - to_intel_atomic_state(state)->skip_intermediate_wm = true; - - for_each_crtc_in_state(state, crtc, crtc_state, i) { - /* - * Force recalculation even if we restore - * current state. With fast modeset this may not result - * in a modeset when the state is compatible. - */ - crtc_state->mode_changed = true; - } - - ret = drm_atomic_commit(state); - } + while (1) { + ret = drm_modeset_lock_all_ctx(dev, &ctx); + if (ret != -EDEADLK) + break; - if (ret == -EDEADLK) { drm_modeset_backoff(&ctx); - goto retry; } + if (!ret) + ret = __intel_display_resume(dev, state); + drm_modeset_drop_locks(&ctx); drm_modeset_acquire_fini(&ctx); mutex_unlock(&dev->mode_config.mutex); -- cgit v1.2.3 From ed0ab110235c659fdb3f73d27907b1b45b89cf30 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 14 Jul 2016 10:42:35 +0800 Subject: clk: sunxi-ng: Fix inverted test condition in ccu_helper_wait_for_lock The condition passed to read*_poll_timeout() is the break condition, i.e. wait for this condition to happen and return success. The original code assumed the opposite, resulting in a warning when the PLL clock rate was changed but never lost it's lock as far as the readout indicated. This was verified by checking the read out register value. Fixes: 1d80c14248d6 ("clk: sunxi-ng: Add common infrastructure") Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Stephen Boyd --- drivers/clk/sunxi-ng/ccu_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/sunxi-ng/ccu_common.c b/drivers/clk/sunxi-ng/ccu_common.c index fc17b5295e16..51d4bac97ab3 100644 --- a/drivers/clk/sunxi-ng/ccu_common.c +++ b/drivers/clk/sunxi-ng/ccu_common.c @@ -31,7 +31,7 @@ void ccu_helper_wait_for_lock(struct ccu_common *common, u32 lock) return; WARN_ON(readl_relaxed_poll_timeout(common->base + common->reg, reg, - !(reg & lock), 100, 70000)); + reg & lock, 100, 70000)); } int sunxi_ccu_probe(struct device_node *node, void __iomem *reg, -- cgit v1.2.3 From 672ca65d9aa8578f382784fe73578cd499664828 Mon Sep 17 00:00:00 2001 From: Parthasarathy Bhuvaragan Date: Wed, 10 Aug 2016 14:07:34 +0200 Subject: tipc: fix variable dereference before NULL check In commit cf6f7e1d5109 ("tipc: dump monitor attributes"), I dereferenced a pointer before checking if its valid. This is reported by static check Smatch as: net/tipc/monitor.c:733 tipc_nl_add_monitor_peer() warn: variable dereferenced before check 'mon' (see line 731) In this commit, we check for a valid monitor before proceeding with any other operation. Fixes: cf6f7e1d5109 ("tipc: dump monitor attributes") Reported-by: Dan Carpenter Signed-off-by: Parthasarathy Bhuvaragan Signed-off-by: David S. Miller --- net/tipc/monitor.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/tipc/monitor.c b/net/tipc/monitor.c index b62caa1c770c..ed97a5876ebe 100644 --- a/net/tipc/monitor.c +++ b/net/tipc/monitor.c @@ -728,12 +728,13 @@ int tipc_nl_add_monitor_peer(struct net *net, struct tipc_nl_msg *msg, u32 bearer_id, u32 *prev_node) { struct tipc_monitor *mon = tipc_monitor(net, bearer_id); - struct tipc_peer *peer = mon->self; + struct tipc_peer *peer; if (!mon) return -EINVAL; read_lock_bh(&mon->lock); + peer = mon->self; do { if (*prev_node) { if (peer->addr == *prev_node) -- cgit v1.2.3 From dafa6b0db2d62164c5ef81a40312d5ba514126b9 Mon Sep 17 00:00:00 2001 From: Fabian Frederick Date: Wed, 10 Aug 2016 17:48:36 +0200 Subject: net: hns: fix typo in g_gmac_stats_string[] s/gamc/gmac/ Signed-off-by: Fabian Frederick Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c index 1235c7f2564b..1e1eb92998fb 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c @@ -17,7 +17,7 @@ static const struct mac_stats_string g_gmac_stats_string[] = { {"gmac_rx_octets_total_ok", MAC_STATS_FIELD_OFF(rx_good_bytes)}, {"gmac_rx_octets_bad", MAC_STATS_FIELD_OFF(rx_bad_bytes)}, {"gmac_rx_uc_pkts", MAC_STATS_FIELD_OFF(rx_uc_pkts)}, - {"gamc_rx_mc_pkts", MAC_STATS_FIELD_OFF(rx_mc_pkts)}, + {"gmac_rx_mc_pkts", MAC_STATS_FIELD_OFF(rx_mc_pkts)}, {"gmac_rx_bc_pkts", MAC_STATS_FIELD_OFF(rx_bc_pkts)}, {"gmac_rx_pkts_64octets", MAC_STATS_FIELD_OFF(rx_64bytes)}, {"gmac_rx_pkts_65to127", MAC_STATS_FIELD_OFF(rx_65to127)}, -- cgit v1.2.3 From e7f851684efb3377e9c93aca7fae6e76212e5680 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 5 Aug 2016 23:37:34 -0700 Subject: megaraid_sas: Fix probing cards without io port Found one megaraid_sas HBA probe fails, [ 187.235190] scsi host2: Avago SAS based MegaRAID driver [ 191.112365] megaraid_sas 0000:89:00.0: BAR 0: can't reserve [io 0x0000-0x00ff] [ 191.120548] megaraid_sas 0000:89:00.0: IO memory region busy! and the card has resource like, [ 125.097714] pci 0000:89:00.0: [1000:005d] type 00 class 0x010400 [ 125.104446] pci 0000:89:00.0: reg 0x10: [io 0x0000-0x00ff] [ 125.110686] pci 0000:89:00.0: reg 0x14: [mem 0xce400000-0xce40ffff 64bit] [ 125.118286] pci 0000:89:00.0: reg 0x1c: [mem 0xce300000-0xce3fffff 64bit] [ 125.125891] pci 0000:89:00.0: reg 0x30: [mem 0xce200000-0xce2fffff pref] that does not io port resource allocated from BIOS, and kernel can not assign one as io port shortage. The driver is only looking for MEM, and should not fail. It turns out megasas_init_fw() etc are using bar index as mask. index 1 is used as mask 1, so that pci_request_selected_regions() is trying to request BAR0 instead of BAR1. Fix all related reference. Fixes: b6d5d8808b4c ("megaraid_sas: Use lowest memory bar for SR-IOV VF support") Signed-off-by: Yinghai Lu Acked-by: Kashyap Desai Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid/megaraid_sas_base.c | 6 +++--- drivers/scsi/megaraid/megaraid_sas_fusion.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 2dab3dc2aa69..c1ed25adb17e 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -5037,7 +5037,7 @@ static int megasas_init_fw(struct megasas_instance *instance) /* Find first memory bar */ bar_list = pci_select_bars(instance->pdev, IORESOURCE_MEM); instance->bar = find_first_bit(&bar_list, sizeof(unsigned long)); - if (pci_request_selected_regions(instance->pdev, instance->bar, + if (pci_request_selected_regions(instance->pdev, 1<bar, "megasas: LSI")) { dev_printk(KERN_DEBUG, &instance->pdev->dev, "IO memory region busy!\n"); return -EBUSY; @@ -5339,7 +5339,7 @@ fail_ready_state: iounmap(instance->reg_set); fail_ioremap: - pci_release_selected_regions(instance->pdev, instance->bar); + pci_release_selected_regions(instance->pdev, 1<bar); return -EINVAL; } @@ -5360,7 +5360,7 @@ static void megasas_release_mfi(struct megasas_instance *instance) iounmap(instance->reg_set); - pci_release_selected_regions(instance->pdev, instance->bar); + pci_release_selected_regions(instance->pdev, 1<bar); } /** diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index ec837544f784..52d8bbf7feb5 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -2603,7 +2603,7 @@ megasas_release_fusion(struct megasas_instance *instance) iounmap(instance->reg_set); - pci_release_selected_regions(instance->pdev, instance->bar); + pci_release_selected_regions(instance->pdev, 1<bar); } /** -- cgit v1.2.3 From 0d7826ddded60dbe36c451b462c24387e2727275 Mon Sep 17 00:00:00 2001 From: Brian King Date: Wed, 10 Aug 2016 22:45:57 -0400 Subject: ipr: Fix sync scsi scan Commit b195d5e2bffd ("ipr: Wait to do async scan until scsi host is initialized") fixed async scan for ipr, but broke sync scan. This fixes sync scan back up. Signed-off-by: Brian King Tested-by: Michael Ellerman Signed-off-by: Martin K. Petersen --- drivers/scsi/ipr.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index bf85974be862..17d04c702e1b 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -10410,8 +10410,11 @@ static int ipr_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id) __ipr_remove(pdev); return rc; } + spin_lock_irqsave(ioa_cfg->host->host_lock, flags); + ioa_cfg->scan_enabled = 1; + schedule_work(&ioa_cfg->work_q); + spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags); - scsi_scan_host(ioa_cfg->host); ioa_cfg->iopoll_weight = ioa_cfg->chip_cfg->iopoll_weight; if (ioa_cfg->iopoll_weight && ioa_cfg->sis64 && ioa_cfg->nvectors > 1) { @@ -10421,10 +10424,8 @@ static int ipr_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id) } } - spin_lock_irqsave(ioa_cfg->host->host_lock, flags); - ioa_cfg->scan_enabled = 1; - schedule_work(&ioa_cfg->work_q); - spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags); + scsi_scan_host(ioa_cfg->host); + return 0; } -- cgit v1.2.3 From 4b5b9ba553f9aa5f484ab972fc9b58061885ceca Mon Sep 17 00:00:00 2001 From: Martynas Pumputis Date: Tue, 9 Aug 2016 16:24:50 +0100 Subject: openvswitch: do not ignore netdev errors when creating tunnel vports The creation of a tunnel vport (geneve, gre, vxlan) brings up a corresponding netdev, a multi-step operation which can fail. For example, changing a vxlan vport's netdev state to 'up' binds the vport's socket to a UDP port - if the binding fails (e.g. due to the port being in use), the error is currently ignored giving the appearance that the tunnel vport creation completed successfully. Signed-off-by: Martynas Pumputis Acked-by: Pravin B Shelar Signed-off-by: David S. Miller --- net/openvswitch/vport-geneve.c | 9 ++++++++- net/openvswitch/vport-gre.c | 11 +++++++++-- net/openvswitch/vport-vxlan.c | 9 ++++++++- 3 files changed, 25 insertions(+), 4 deletions(-) diff --git a/net/openvswitch/vport-geneve.c b/net/openvswitch/vport-geneve.c index 1a1fcec88695..5aaf3babfc3f 100644 --- a/net/openvswitch/vport-geneve.c +++ b/net/openvswitch/vport-geneve.c @@ -93,7 +93,14 @@ static struct vport *geneve_tnl_create(const struct vport_parms *parms) return ERR_CAST(dev); } - dev_change_flags(dev, dev->flags | IFF_UP); + err = dev_change_flags(dev, dev->flags | IFF_UP); + if (err < 0) { + rtnl_delete_link(dev); + rtnl_unlock(); + ovs_vport_free(vport); + goto error; + } + rtnl_unlock(); return vport; error: diff --git a/net/openvswitch/vport-gre.c b/net/openvswitch/vport-gre.c index 7f8897f33a67..0e72d95b0e8f 100644 --- a/net/openvswitch/vport-gre.c +++ b/net/openvswitch/vport-gre.c @@ -54,6 +54,7 @@ static struct vport *gre_tnl_create(const struct vport_parms *parms) struct net *net = ovs_dp_get_net(parms->dp); struct net_device *dev; struct vport *vport; + int err; vport = ovs_vport_alloc(0, &ovs_gre_vport_ops, parms); if (IS_ERR(vport)) @@ -67,9 +68,15 @@ static struct vport *gre_tnl_create(const struct vport_parms *parms) return ERR_CAST(dev); } - dev_change_flags(dev, dev->flags | IFF_UP); - rtnl_unlock(); + err = dev_change_flags(dev, dev->flags | IFF_UP); + if (err < 0) { + rtnl_delete_link(dev); + rtnl_unlock(); + ovs_vport_free(vport); + return ERR_PTR(err); + } + rtnl_unlock(); return vport; } diff --git a/net/openvswitch/vport-vxlan.c b/net/openvswitch/vport-vxlan.c index 5eb7694348b5..7eb955e453e6 100644 --- a/net/openvswitch/vport-vxlan.c +++ b/net/openvswitch/vport-vxlan.c @@ -130,7 +130,14 @@ static struct vport *vxlan_tnl_create(const struct vport_parms *parms) return ERR_CAST(dev); } - dev_change_flags(dev, dev->flags | IFF_UP); + err = dev_change_flags(dev, dev->flags | IFF_UP); + if (err < 0) { + rtnl_delete_link(dev); + rtnl_unlock(); + ovs_vport_free(vport); + goto error; + } + rtnl_unlock(); return vport; error: -- cgit v1.2.3 From 851da9ac53a5e7121f7c38a052f74b574dd73ec3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 10 Aug 2016 23:54:09 +0200 Subject: drm/mediatek: add COMMON_CLK dependency On kernel builds without COMMON_CLK, the newly added mediatek drm driver fails to build: drivers/gpu/drm/mediatek/mtk_mipi_tx.c:130:16: error: field 'pll_hw' has incomplete type struct clk_hw pll_hw; ^~~~~~ In file included from ../include/linux/clk.h:16:0, from ../drivers/gpu/drm/mediatek/mtk_mipi_tx.c:14: drivers/gpu/drm/mediatek/mtk_mipi_tx.c: In function 'mtk_mipi_tx_from_clk_hw': include/linux/kernel.h:831:48: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] const typeof( ((type *)0)->member ) *__mptr = (ptr); \ ^ /drivers/gpu/drm/mediatek/mtk_mipi_tx.c:136:9: note: in expansion of macro 'container_of' return container_of(hw, struct mtk_mipi_tx, pll_hw); ^~~~~~~~~~~~ drivers/gpu/drm/mediatek/mtk_mipi_tx.c: At top level: drivers/gpu/drm/mediatek/mtk_mipi_tx.c:302:21: error: variable 'mtk_mipi_tx_pll_ops' has initializer but incomplete type static const struct clk_ops mtk_mipi_tx_pll_ops = { This adds the required Kconfig dependency. Signed-off-by: Arnd Bergmann Acked-by: Philipp Zabel Link: https://patchwork.kernel.org/patch/9069061/ Signed-off-by: Philipp Zabel --- drivers/gpu/drm/mediatek/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/mediatek/Kconfig b/drivers/gpu/drm/mediatek/Kconfig index 23ac8041c562..5c2163737691 100644 --- a/drivers/gpu/drm/mediatek/Kconfig +++ b/drivers/gpu/drm/mediatek/Kconfig @@ -2,6 +2,7 @@ config DRM_MEDIATEK tristate "DRM Support for Mediatek SoCs" depends on DRM depends on ARCH_MEDIATEK || (ARM && COMPILE_TEST) + depends on COMMON_CLK select DRM_GEM_CMA_HELPER select DRM_KMS_HELPER select DRM_MIPI_DSI -- cgit v1.2.3 From b5db361eb7746cc9ada51554a6b996170c439f0b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 10 Aug 2016 23:54:10 +0200 Subject: drm/mediatek: add CONFIG_OF dependency The mediatek DRM driver can be configured for compile testing with CONFIG_OF disabled, but then fails to link: drivers/gpu/built-in.o: In function `mtk_drm_bind': analogix_dp_reg.c:(.text+0x52888): undefined reference to `of_find_device_by_node' analogix_dp_reg.c:(.text+0x52930): undefined reference to `of_find_device_by_node' This adds an explicit Kconfig dependency. Signed-off-by: Arnd Bergmann Link: https://patchwork.kernel.org/patch/9120871/ Signed-off-by: Philipp Zabel --- drivers/gpu/drm/mediatek/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/mediatek/Kconfig b/drivers/gpu/drm/mediatek/Kconfig index 5c2163737691..96ebf8bb6024 100644 --- a/drivers/gpu/drm/mediatek/Kconfig +++ b/drivers/gpu/drm/mediatek/Kconfig @@ -3,6 +3,7 @@ config DRM_MEDIATEK depends on DRM depends on ARCH_MEDIATEK || (ARM && COMPILE_TEST) depends on COMMON_CLK + depends on OF select DRM_GEM_CMA_HELPER select DRM_KMS_HELPER select DRM_MIPI_DSI -- cgit v1.2.3 From 306d674a2ddd565adde7d9d6703157105c8444a6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 10 Aug 2016 23:54:11 +0200 Subject: drm/mediatek: add ARM_SMCCC dependency ARM SMCCC is only set for ARMv7 and ARMv8 CPUs, but we currently allow the driver to be build for older architecture levels as well, which results in a link failure: drivers/gpu/built-in.o: In function `mtk_hdmi_hw_make_reg_writable': :(.text+0x1e737c): undefined reference to `arm_smccc_smc' This adds a Kconfig dependency. The patch applies on my two previous fixes that are not yet applied, so please apply all three to get randconfig builds to work correctly. Signed-off-by: Arnd Bergmann Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support") Reviewed-by: Matthias Brugger Signed-off-by: Philipp Zabel --- drivers/gpu/drm/mediatek/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/mediatek/Kconfig b/drivers/gpu/drm/mediatek/Kconfig index 96ebf8bb6024..294de4549922 100644 --- a/drivers/gpu/drm/mediatek/Kconfig +++ b/drivers/gpu/drm/mediatek/Kconfig @@ -3,6 +3,7 @@ config DRM_MEDIATEK depends on DRM depends on ARCH_MEDIATEK || (ARM && COMPILE_TEST) depends on COMMON_CLK + depends on HAVE_ARM_SMCCC depends on OF select DRM_GEM_CMA_HELPER select DRM_KMS_HELPER -- cgit v1.2.3 From af7752106e4f12b4ee47b4eca3e7ba4bcec6e7e5 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Tue, 9 Aug 2016 15:58:48 +0200 Subject: s390/dasd: fix failing CUIR assignment under LPAR On LPAR the read message buffer command should be executed on the path it was received on otherwise there is a chance that the CUIR assignment might be faulty and the wrong channel path is set online/offline. Fix by setting the path mask accordingly. On z/VM we might not be able to do I/O on this path but there it does not matter on which path the read message buffer command is executed. Therefor implement a retry with an open path mask. Signed-off-by: Stefan Haberland --- drivers/s390/block/dasd_eckd.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index fd2eff440098..98bbec44bcd0 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -5078,6 +5078,8 @@ static int dasd_eckd_read_message_buffer(struct dasd_device *device, return PTR_ERR(cqr); } + cqr->lpm = lpum; +retry: cqr->startdev = device; cqr->memdev = device; cqr->block = NULL; @@ -5122,6 +5124,14 @@ static int dasd_eckd_read_message_buffer(struct dasd_device *device, (prssdp + 1); memcpy(messages, message_buf, sizeof(struct dasd_rssd_messages)); + } else if (cqr->lpm) { + /* + * on z/VM we might not be able to do I/O on the requested path + * but instead we get the required information on any path + * so retry with open path mask + */ + cqr->lpm = 0; + goto retry; } else DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "Reading messages failed with rc=%d\n" -- cgit v1.2.3 From 772ce81264b179c0e61340998e3b29e900b2fa6d Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 8 Aug 2016 21:50:51 +0900 Subject: usb: renesas_usbhs: Fix receiving data corrupt on R-Car Gen3 with dmac Since R-Car Gen3 SoC has the USB-DMAC, this driver should set dparam->has_usb_dmac to 1. Otherwise, behavior of this driver and the usb-dmac driver will be mismatch, then sometimes receiving data will be corrupt. Fixes: de18757e272d ("usb: renesas_usbhs: add R-Car Gen3 power control") Cc: # v4.5+ Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/common.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 8fbbc2d32371..ac67bab9124c 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -514,7 +514,8 @@ static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev) if (gpio > 0) dparam->enable_gpio = gpio; - if (dparam->type == USBHS_TYPE_RCAR_GEN2) + if (dparam->type == USBHS_TYPE_RCAR_GEN2 || + dparam->type == USBHS_TYPE_RCAR_GEN3) dparam->has_usb_dmac = 1; return info; -- cgit v1.2.3 From 9ab967e6db7412b675ecbff80d5371d53c82cb2e Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 8 Aug 2016 21:50:52 +0900 Subject: usb: renesas_usbhs: clear the BRDYSTS in usbhsg_ep_enable() This patch fixes an issue that unexpected BRDY interruption happens when the usb_ep_{enable,disable}() are called with different direction. In this case, the driver will cause the following message: renesas_usbhs e6590000.usb: irq_ready run_error 1 : -16 This issue causes the followings: 1) A pipe is enabled as transmission 2) The pipe sent a data 3) The pipe is disabled and re-enabled as reception. 4) The pipe got a queue Since the driver doesn't clear the BRDYSTS flags after 2) above, the issue happens. If we add such clearing the flags into the driver, the code will become complicate. So, this patch clears the BRDYSTS flag of reception in usbhsg_ep_enable() to avoid complicate. Cc: # v4.1+ (usbhs_xxxsts_clear() is needed) Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/mod_gadget.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 50f3363cc382..92bc83b92d10 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -617,10 +617,13 @@ static int usbhsg_ep_enable(struct usb_ep *ep, * use dmaengine if possible. * It will use pio handler if impossible. */ - if (usb_endpoint_dir_in(desc)) + if (usb_endpoint_dir_in(desc)) { pipe->handler = &usbhs_fifo_dma_push_handler; - else + } else { pipe->handler = &usbhs_fifo_dma_pop_handler; + usbhs_xxxsts_clear(priv, BRDYSTS, + usbhs_pipe_number(pipe)); + } ret = 0; } -- cgit v1.2.3 From 700aa7ff8d2c2b9cc669c99375e2ccd06d3cd38d Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 8 Aug 2016 21:50:53 +0900 Subject: usb: renesas_usbhs: Use dmac only if the pipe type is bulk This patch fixes an issue that isochronous transfer's data is possible to be lost as a workaround. Since this driver uses a workqueue to start the dmac, the transfer is possible to be delayed when system load is high. Fixes: 6e4b74e4690d ("usb: renesas: fix scheduling in atomic context bug") Cc: # v3.4+ Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/fifo.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index 280ed5ff021b..857e78337324 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -871,7 +871,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) /* use PIO if packet is less than pio_dma_border or pipe is DCP */ if ((len < usbhs_get_dparam(priv, pio_dma_border)) || - usbhs_pipe_is_dcp(pipe)) + usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC)) goto usbhsf_pio_prepare_push; /* check data length if this driver don't use USB-DMAC */ @@ -976,7 +976,7 @@ static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt, /* use PIO if packet is less than pio_dma_border or pipe is DCP */ if ((pkt->length < usbhs_get_dparam(priv, pio_dma_border)) || - usbhs_pipe_is_dcp(pipe)) + usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC)) goto usbhsf_pio_prepare_pop; fifo = usbhsf_get_dma_fifo(priv, pkt); -- cgit v1.2.3 From c526c62d565ea5a5bba9433f28756079734f430d Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 1 Jul 2016 15:33:28 +0800 Subject: usb: gadget: composite: fix dereference after null check coverify warning cdev->config is checked for null pointer at above code, so cdev->config might be null, fix it by adding null pointer check. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index eb648485a58c..a8ecc7a612b9 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1913,6 +1913,8 @@ unknown: break; case USB_RECIP_ENDPOINT: + if (!cdev->config) + break; endp = ((w_index & 0x80) >> 3) | (w_index & 0x0f); list_for_each_entry(f, &cdev->config->functions, list) { if (test_bit(endp, f->endpoints)) -- cgit v1.2.3 From 88c09eacf560c3303d0ee8cf91b8b7ff7f000350 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 1 Jul 2016 15:33:29 +0800 Subject: usb: gadget: u_ether: fix dereference after null check coverify warning dev->port_usb is checked for null pointer at above code, so dev->port_usb might be null, fix it by adding null pointer check. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/u_ether.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index a3f7e7c55ebb..5f562c1ec795 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -556,7 +556,8 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb, /* Multi frame CDC protocols may store the frame for * later which is not a dropped frame. */ - if (dev->port_usb->supports_multi_frame) + if (dev->port_usb && + dev->port_usb->supports_multi_frame) goto multiframe; goto drop; } -- cgit v1.2.3 From cee51c33f52ebf673a088a428ac0fecc33ab77fa Mon Sep 17 00:00:00 2001 From: Winter Wang Date: Wed, 27 Jul 2016 10:03:19 +0800 Subject: usb: gadget: configfs: add mutex lock before unregister gadget There may be a race condition if f_fs calls unregister_gadget_item in ffs_closed() when unregister_gadget is called by UDC store at the same time. this leads to a kernel NULL pointer dereference: [ 310.644928] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 310.645053] init: Service 'adbd' is being killed... [ 310.658938] pgd = c9528000 [ 310.662515] [00000004] *pgd=19451831, *pte=00000000, *ppte=00000000 [ 310.669702] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 310.675211] Modules linked in: [ 310.678294] CPU: 0 PID: 1537 Comm: ->transport Not tainted 4.1.15-03725-g793404c #2 [ 310.685958] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 310.692493] task: c8e24200 ti: c945e000 task.ti: c945e000 [ 310.697911] PC is at usb_gadget_unregister_driver+0xb4/0xd0 [ 310.703502] LR is at __mutex_lock_slowpath+0x10c/0x16c [ 310.708648] pc : [] lr : [] psr: 600f0113 [ 311.565585] [] (usb_gadget_unregister_driver) from [] (unregister_gadget_item+0x1c/0x34) [ 311.575426] [] (unregister_gadget_item) from [] (ffs_closed+0x8c/0x9c) [ 311.583702] [] (ffs_closed) from [] (ffs_data_reset+0xc/0xa0) [ 311.591194] [] (ffs_data_reset) from [] (ffs_data_closed+0x90/0xd0) [ 311.599208] [] (ffs_data_closed) from [] (ffs_ep0_release+0xc/0x14) [ 311.607224] [] (ffs_ep0_release) from [] (__fput+0x80/0x1d0) [ 311.614635] [] (__fput) from [] (task_work_run+0xb0/0xe8) [ 311.621788] [] (task_work_run) from [] (do_work_pending+0x7c/0xa4) [ 311.629718] [] (do_work_pending) from [] (work_pending+0xc/0x20) for functions using functionFS, i.e. android adbd will close /dev/usb-ffs/adb/ep0 when usb IO thread fails, but switch adb from on to off also triggers write "none" > UDC. These 2 operations both call unregister_gadget, which will lead to the panic above. add a mutex before calling unregister_gadget for api used in f_fs. Signed-off-by: Winter Wang Signed-off-by: Felipe Balbi --- drivers/usb/gadget/configfs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index 70cf3477f951..f9237fe2be05 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -1490,7 +1490,9 @@ void unregister_gadget_item(struct config_item *item) { struct gadget_info *gi = to_gadget_info(item); + mutex_lock(&gi->lock); unregister_gadget(gi); + mutex_unlock(&gi->lock); } EXPORT_SYMBOL_GPL(unregister_gadget_item); -- cgit v1.2.3 From ec57fcd042a9448096705847290d4e4e97fbb7e1 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 26 Jul 2016 14:48:39 +0000 Subject: usb: phy: omap-otg: Fix missing platform_set_drvdata() in omap_otg_probe() Add missing platform_set_drvdata() in omap_otg_probe(), otherwise calling platform_get_drvdata() in remove returns NULL. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-omap-otg.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/phy/phy-omap-otg.c b/drivers/usb/phy/phy-omap-otg.c index 6f6d2a7fd5a0..6523af4f8f93 100644 --- a/drivers/usb/phy/phy-omap-otg.c +++ b/drivers/usb/phy/phy-omap-otg.c @@ -140,6 +140,8 @@ static int omap_otg_probe(struct platform_device *pdev) (rev >> 4) & 0xf, rev & 0xf, config->extcon, otg_dev->id, otg_dev->vbus); + platform_set_drvdata(pdev, otg_dev); + return 0; } -- cgit v1.2.3 From 4c4f106c032ff32b89c98a4d819e68e6e643c14e Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 26 Jul 2016 14:47:00 +0000 Subject: usb: dwc3: fix missing platform_set_drvdata() in dwc3_of_simple_probe() Add missing platform_set_drvdata() in dwc3_of_simple_probe(), otherwise calling platform_get_drvdata() in remove returns NULL. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-of-simple.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c index 974335377d9f..e56d59b19a0e 100644 --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c @@ -61,6 +61,7 @@ static int dwc3_of_simple_probe(struct platform_device *pdev) if (!simple->clks) return -ENOMEM; + platform_set_drvdata(pdev, simple); simple->dev = dev; for (i = 0; i < simple->num_clocks; i++) { -- cgit v1.2.3 From 528d28138f91009f230903bd89ccd44719667831 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 26 Jul 2016 16:01:30 +0800 Subject: usb: misc: usbtest: usbtest_do_ioctl may return positive integer For case 14 and case 21, their correct return value is the number of bytes transferred, so it is a positive integer. But in usbtest_ioctl, it takes non-zero as false return value for usbtest_do_ioctl, so it will treat the correct test as wrong test, then the time on tests will be the minus value. Signed-off-by: Peter Chen Cc: stable Fixes: 18fc4ebdc705 ("usb: misc: usbtest: Remove timeval usage") Signed-off-by: Felipe Balbi --- drivers/usb/misc/usbtest.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 6b978f04b8d7..5e3464e8d4e5 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -2602,7 +2602,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) ktime_get_ts64(&start); retval = usbtest_do_ioctl(intf, param_32); - if (retval) + if (retval < 0) goto free_mutex; ktime_get_ts64(&end); -- cgit v1.2.3 From 63196e989699ddffb4e3d30ca8c3567d408820f4 Mon Sep 17 00:00:00 2001 From: Binyamin Sharet Date: Thu, 7 Jul 2016 22:22:04 +0300 Subject: usb: gadget: fix check in sync read from ep in gadgetfs When reading synchronously from a non-zero endpoint, gadgetfs will return -EFAULT even if the read succeeds, due to a bad check of the copy_to_iter() return value. This fix compares the return value of copy_to_iter to the amount of bytes that was passed, and only fails if they are not the same. Signed-off-by: Binyamin Sharet Signed-off-by: Felipe Balbi --- drivers/usb/gadget/legacy/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index aa3707bdebb4..8560f2fe3af5 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -606,7 +606,7 @@ ep_read_iter(struct kiocb *iocb, struct iov_iter *to) } if (is_sync_kiocb(iocb)) { value = ep_io(epdata, buf, len); - if (value >= 0 && copy_to_iter(buf, value, to)) + if (value >= 0 && (copy_to_iter(buf, value, to) != value)) value = -EFAULT; } else { struct kiocb_priv *priv = kzalloc(sizeof *priv, GFP_KERNEL); -- cgit v1.2.3 From bd610c5aa9fcc9817d2629274a27aab81aa77cec Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 16 Jul 2016 09:04:40 +0200 Subject: usb: gadget: uvc: Fix return value in case of error If this memory allocation fail, we will return 0, which means success. Return -ENOMEM instead. Reviewed-by: Laurent Pinchart Signed-off-by: Christophe JAILLET Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/uvc_configfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c index 66753ba7a42e..31125a4a2658 100644 --- a/drivers/usb/gadget/function/uvc_configfs.c +++ b/drivers/usb/gadget/function/uvc_configfs.c @@ -2023,7 +2023,7 @@ static int uvcg_streaming_class_allow_link(struct config_item *src, if (!data) { kfree(*class_array); *class_array = NULL; - ret = PTR_ERR(data); + ret = -ENOMEM; goto unlock; } cl_arr = *class_array; -- cgit v1.2.3 From 3887db5c2b6531c59e9649a4293071b575d6eb3b Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 16 Jul 2016 08:34:33 +0200 Subject: usb: gadget: composite: Fix return value in case of error In 'composite_os_desc_req_prepare', if one of the memory allocations fail, 0 will be returned, which means success. We should return -ENOMEM instead. Signed-off-by: Christophe JAILLET Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index a8ecc7a612b9..5ebe6af7976e 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -2126,14 +2126,14 @@ int composite_os_desc_req_prepare(struct usb_composite_dev *cdev, cdev->os_desc_req = usb_ep_alloc_request(ep0, GFP_KERNEL); if (!cdev->os_desc_req) { - ret = PTR_ERR(cdev->os_desc_req); + ret = -ENOMEM; goto end; } /* OS feature descriptor length <= 4kB */ cdev->os_desc_req->buf = kmalloc(4096, GFP_KERNEL); if (!cdev->os_desc_req->buf) { - ret = PTR_ERR(cdev->os_desc_req->buf); + ret = -ENOMEM; kfree(cdev->os_desc_req); goto end; } -- cgit v1.2.3 From 327b21da884fe1a29f733e41792ddd53e4a30379 Mon Sep 17 00:00:00 2001 From: Mathieu Laurendeau Date: Fri, 15 Jul 2016 14:58:41 +0200 Subject: usb/gadget: fix gadgetfs aio support. Fix io submissions failing with ENODEV. Signed-off-by: Mathieu Laurendeau Fixes: 7fe3976e0f3a ("gadget: switch ep_io_operations to ->read_iter/->write_iter") Signed-off-by: Felipe Balbi --- drivers/usb/gadget/legacy/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index 8560f2fe3af5..16104b5ebdcb 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -542,7 +542,7 @@ static ssize_t ep_aio(struct kiocb *iocb, */ spin_lock_irq(&epdata->dev->lock); value = -ENODEV; - if (unlikely(epdata->ep)) + if (unlikely(epdata->ep == NULL)) goto fail; req = usb_ep_alloc_request(epdata->ep, GFP_ATOMIC); -- cgit v1.2.3 From 7442e6db5bdd0dce4615205508301f9b22e502d6 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 13 Jul 2016 13:14:33 +0300 Subject: usb: gadget: fsl_qe_udc: off by one in setup_received_handle() The udc->eps[] array has USB_MAX_ENDPOINTS elements so > should be >=. Fixes: 3948f0e0c999 ('usb: add Freescale QE/CPM USB peripheral controller driver') Acked-by: Peter Chen Signed-off-by: Dan Carpenter Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/fsl_qe_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c index 93d28cb00b76..cf8819a5c5b2 100644 --- a/drivers/usb/gadget/udc/fsl_qe_udc.c +++ b/drivers/usb/gadget/udc/fsl_qe_udc.c @@ -2053,7 +2053,7 @@ static void setup_received_handle(struct qe_udc *udc, struct qe_ep *ep; if (wValue != 0 || wLength != 0 - || pipe > USB_MAX_ENDPOINTS) + || pipe >= USB_MAX_ENDPOINTS) break; ep = &udc->eps[pipe]; -- cgit v1.2.3 From 17a1dc5e22d25ba374d8c8dd8d5bf10bd20d3265 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Mon, 11 Jul 2016 09:58:16 +0800 Subject: usb: udc: core: fix error handling The udc device needs to be deleted if error occurs Fixes: 855ed04a3758 ("usb: gadget: udc-core: independent registration of gadgets and gadget drivers") Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index ff8685ea7219..934f83881c30 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -1145,7 +1145,7 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget, if (ret != -EPROBE_DEFER) list_del(&driver->pending); if (ret) - goto err4; + goto err5; break; } } @@ -1154,6 +1154,9 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget, return 0; +err5: + device_del(&udc->dev); + err4: list_del(&udc->list); mutex_unlock(&udc_lock); -- cgit v1.2.3 From 207707d8fd48ebc977fb2b2794004a020e1ee08e Mon Sep 17 00:00:00 2001 From: Xerox Lin Date: Wed, 29 Jun 2016 14:34:21 +0530 Subject: usb: gadget: rndis: free response queue during REMOTE_NDIS_RESET_MSG When rndis data transfer is in progress, some Windows7 Host PC is not sending the GET_ENCAPSULATED_RESPONSE command for receiving the response for the previous SEND_ENCAPSULATED_COMMAND processed. The rndis function driver appends each response for the SEND_ENCAPSULATED_COMMAND in a queue. As the above process got corrupted, the Host sends a REMOTE_NDIS_RESET_MSG command to do a soft-reset. As the rndis response queue is not freed, the previous response is sent as a part of this REMOTE_NDIS_RESET_MSG's reset response and the Host block any more Rndis transfers. Hence free the rndis response queue as a part of this soft-reset so that the correct response for REMOTE_NDIS_RESET_MSG is sent properly during the response command. Signed-off-by: Rajkumar Raghupathy Signed-off-by: Xerox Lin [AmitP: Cherry-picked this patch and folded other relevant fixes from Android common kernel android-4.4] Signed-off-by: Amit Pundir Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/rndis.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/gadget/function/rndis.c b/drivers/usb/gadget/function/rndis.c index 943c21aafd3b..ab6ac1b74ac0 100644 --- a/drivers/usb/gadget/function/rndis.c +++ b/drivers/usb/gadget/function/rndis.c @@ -680,6 +680,12 @@ static int rndis_reset_response(struct rndis_params *params, { rndis_reset_cmplt_type *resp; rndis_resp_t *r; + u8 *xbuf; + u32 length; + + /* drain the response queue */ + while ((xbuf = rndis_get_next_response(params, &length))) + rndis_free_response(params, xbuf); r = rndis_add_response(params, sizeof(rndis_reset_cmplt_type)); if (!r) -- cgit v1.2.3 From 79d17482a4091056e128a5048e253f2ed53440cc Mon Sep 17 00:00:00 2001 From: Janusz Dziedzic Date: Thu, 7 Jul 2016 08:39:09 +0200 Subject: usb: dwc3: don't set last bit for ISOC endpoints According to Synopsys Databook 2.60a, section 8.3.4, it's stated that: The LST bit should be set to 0 (isochronous transfers normally continue until the endpoint is removed entirely, at which time an End Transfer command is used to stop the transfer). This patch makes sure that detail is observed and fixes a regression with Android Audio playback caused by recent changes to DWC3 gadget. Signed-off-by: Janusz Dziedzic Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index eb820e4ab49d..7a4d4d2534d4 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -829,7 +829,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, if (!req->request.no_interrupt && !chain) trb->ctrl |= DWC3_TRB_CTRL_IOC | DWC3_TRB_CTRL_ISP_IMI; - if (last) + if (last && !usb_endpoint_xfer_isoc(dep->endpoint.desc)) trb->ctrl |= DWC3_TRB_CTRL_LST; if (chain) -- cgit v1.2.3 From a0ad85ae866f8a01f29a18ffa1e9b1aa8ca888bd Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 10 Aug 2016 18:07:46 +0300 Subject: usb: dwc3: gadget: stop processing on HWO set stop consuming TRBs when we reach one with HWO bit already set. This will prevent us from prematurely retiring a TRB. Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 7a4d4d2534d4..1f5597ef945d 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1979,16 +1979,7 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, trb->ctrl &= ~DWC3_TRB_CTRL_HWO; if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN) - /* - * We continue despite the error. There is not much we - * can do. If we don't clean it up we loop forever. If - * we skip the TRB then it gets overwritten after a - * while since we use them in a ring buffer. A BUG() - * would help. Lets hope that if this occurs, someone - * fixes the root cause instead of looking away :) - */ - dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n", - dep->name, trb); + return 1; count = trb->size & DWC3_TRB_SIZE_MASK; -- cgit v1.2.3 From 70fcad495b9903d362bdbf9ffba23259294064c8 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Thu, 11 Aug 2016 14:39:00 +0100 Subject: ASoC: Fix leak of rtd in soc_bind_dai_link If we fail to find a platform we simply return EPROBE_DEFER, but we have allocated the rtd pointer. All error paths before soc_add_pcm_runtime need to call soc_free_pcm_runtime first to avoid leaking the rtd pointer. A suitable error path already exists and is used else where in the function so simply use that here as well. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 16369cad4803..b0e23db83695 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1056,7 +1056,7 @@ static int soc_bind_dai_link(struct snd_soc_card *card, if (!rtd->platform) { dev_err(card->dev, "ASoC: platform %s not registered\n", dai_link->platform_name); - return -EPROBE_DEFER; + goto _err_defer; } soc_add_pcm_runtime(card, rtd); -- cgit v1.2.3 From fa54aade5338937146bb6b8af93d2c27f6787ae1 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Thu, 11 Aug 2016 14:40:04 +0100 Subject: ASoC: wm2000: Fix return of uninitialised varible Anything that sets ret in wm2000_anc_transition will have immediately returned anyway as such we will always return an uninitialised ret at the bottom of the function. Simply replace the return with a return 0; Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/codecs/wm2000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm2000.c b/sound/soc/codecs/wm2000.c index a67ea10f41a1..f2664396be6f 100644 --- a/sound/soc/codecs/wm2000.c +++ b/sound/soc/codecs/wm2000.c @@ -581,7 +581,7 @@ static int wm2000_anc_transition(struct wm2000_priv *wm2000, if (anc_transitions[i].dest == ANC_OFF) clk_disable_unprepare(wm2000->mclk); - return ret; + return 0; } static int wm2000_anc_set_mode(struct wm2000_priv *wm2000) -- cgit v1.2.3 From d0141191a20289f8955c1e03dad08e42e6f71ca9 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 11 Aug 2016 11:50:30 -0400 Subject: ext4: fix xattr shifting when expanding inodes The code in ext4_expand_extra_isize_ea() treated new_extra_isize argument sometimes as the desired target i_extra_isize and sometimes as the amount by which we need to grow current i_extra_isize. These happen to coincide when i_extra_isize is 0 which used to be the common case and so nobody noticed this until recently when we added i_projid to the inode and so i_extra_isize now needs to grow from 28 to 32 bytes. The result of these bugs was that we sometimes unnecessarily decided to move xattrs out of inode even if there was enough space and we often ended up corrupting in-inode xattrs because arguments to ext4_xattr_shift_entries() were just wrong. This could demonstrate itself as BUG_ON in ext4_xattr_shift_entries() triggering. Fix the problem by introducing new isize_diff variable and use it where appropriate. CC: stable@vger.kernel.org # 4.4.x Reported-by: Dave Chinner Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o --- fs/ext4/xattr.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index 39e9cfb1b371..cb1d7b4482de 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1353,11 +1353,13 @@ int ext4_expand_extra_isize_ea(struct inode *inode, int new_extra_isize, size_t min_offs, free; int total_ino; void *base, *start, *end; - int extra_isize = 0, error = 0, tried_min_extra_isize = 0; + int error = 0, tried_min_extra_isize = 0; int s_min_extra_isize = le16_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_min_extra_isize); + int isize_diff; /* How much do we need to grow i_extra_isize */ down_write(&EXT4_I(inode)->xattr_sem); retry: + isize_diff = new_extra_isize - EXT4_I(inode)->i_extra_isize; if (EXT4_I(inode)->i_extra_isize >= new_extra_isize) { up_write(&EXT4_I(inode)->xattr_sem); return 0; @@ -1382,7 +1384,7 @@ retry: goto cleanup; free = ext4_xattr_free_space(last, &min_offs, base, &total_ino); - if (free >= new_extra_isize) { + if (free >= isize_diff) { entry = IFIRST(header); ext4_xattr_shift_entries(entry, EXT4_I(inode)->i_extra_isize - new_extra_isize, (void *)raw_inode + @@ -1414,7 +1416,7 @@ retry: end = bh->b_data + bh->b_size; min_offs = end - base; free = ext4_xattr_free_space(first, &min_offs, base, NULL); - if (free < new_extra_isize) { + if (free < isize_diff) { if (!tried_min_extra_isize && s_min_extra_isize) { tried_min_extra_isize++; new_extra_isize = s_min_extra_isize; @@ -1428,7 +1430,7 @@ retry: free = inode->i_sb->s_blocksize; } - while (new_extra_isize > 0) { + while (isize_diff > 0) { size_t offs, size, entry_size; struct ext4_xattr_entry *small_entry = NULL; struct ext4_xattr_info i = { @@ -1459,7 +1461,7 @@ retry: EXT4_XATTR_SIZE(le32_to_cpu(last->e_value_size)) + EXT4_XATTR_LEN(last->e_name_len); if (total_size <= free && total_size < min_total_size) { - if (total_size < new_extra_isize) { + if (total_size < isize_diff) { small_entry = last; } else { entry = last; @@ -1516,20 +1518,19 @@ retry: goto cleanup; entry = IFIRST(header); - if (entry_size + EXT4_XATTR_SIZE(size) >= new_extra_isize) - shift_bytes = new_extra_isize; + if (entry_size + EXT4_XATTR_SIZE(size) >= isize_diff) + shift_bytes = isize_diff; else shift_bytes = entry_size + size; /* Adjust the offsets and shift the remaining entries ahead */ - ext4_xattr_shift_entries(entry, EXT4_I(inode)->i_extra_isize - - shift_bytes, (void *)raw_inode + - EXT4_GOOD_OLD_INODE_SIZE + extra_isize + shift_bytes, + ext4_xattr_shift_entries(entry, -shift_bytes, + (void *)raw_inode + EXT4_GOOD_OLD_INODE_SIZE + + EXT4_I(inode)->i_extra_isize + shift_bytes, (void *)header, total_ino - entry_size, inode->i_sb->s_blocksize); - extra_isize += shift_bytes; - new_extra_isize -= shift_bytes; - EXT4_I(inode)->i_extra_isize = extra_isize; + isize_diff -= shift_bytes; + EXT4_I(inode)->i_extra_isize += shift_bytes; i.name = b_entry_name; i.value = buffer; -- cgit v1.2.3 From 418c12d08dc64a45107c467ec1ba29b5e69b0715 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 11 Aug 2016 11:58:32 -0400 Subject: ext4: fix xattr shifting when expanding inodes part 2 When multiple xattrs need to be moved out of inode, we did not properly recompute total size of xattr headers in the inode and the new header position. Thus when moving the second and further xattr we asked ext4_xattr_shift_entries() to move too much and from the wrong place, resulting in possible xattr value corruption or general memory corruption. CC: stable@vger.kernel.org # 4.4.x Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o --- fs/ext4/xattr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index cb1d7b4482de..b18b1ff7cc27 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1516,6 +1516,7 @@ retry: error = ext4_xattr_ibody_set(handle, inode, &i, is); if (error) goto cleanup; + total_ino -= entry_size; entry = IFIRST(header); if (entry_size + EXT4_XATTR_SIZE(size) >= isize_diff) @@ -1526,11 +1527,11 @@ retry: ext4_xattr_shift_entries(entry, -shift_bytes, (void *)raw_inode + EXT4_GOOD_OLD_INODE_SIZE + EXT4_I(inode)->i_extra_isize + shift_bytes, - (void *)header, total_ino - entry_size, - inode->i_sb->s_blocksize); + (void *)header, total_ino, inode->i_sb->s_blocksize); isize_diff -= shift_bytes; EXT4_I(inode)->i_extra_isize += shift_bytes; + header = IHDR(inode, raw_inode); i.name = b_entry_name; i.value = buffer; -- cgit v1.2.3 From 443a8c41cd49de66a3fda45b32b9860ea0292b84 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 11 Aug 2016 12:00:01 -0400 Subject: ext4: properly align shifted xattrs when expanding inodes We did not count with the padding of xattr value when computing desired shift of xattrs in the inode when expanding i_extra_isize. As a result we could create unaligned start of inline xattrs. Account for alignment properly. CC: stable@vger.kernel.org # 4.4.x- Signed-off-by: Jan Kara --- fs/ext4/xattr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index b18b1ff7cc27..c893f00b6dc0 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1522,7 +1522,7 @@ retry: if (entry_size + EXT4_XATTR_SIZE(size) >= isize_diff) shift_bytes = isize_diff; else - shift_bytes = entry_size + size; + shift_bytes = entry_size + EXT4_XATTR_SIZE(size); /* Adjust the offsets and shift the remaining entries ahead */ ext4_xattr_shift_entries(entry, -shift_bytes, (void *)raw_inode + EXT4_GOOD_OLD_INODE_SIZE + -- cgit v1.2.3 From 539587511835ea12d8daa444cbed766cf2bc3612 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Thu, 11 Aug 2016 10:31:14 +0800 Subject: usb: misc: usbtest: add fix for driver hang In sg_timeout(), req->status is set to "-ETIMEDOUT" before calling into usb_sg_cancel(). usb_sg_cancel() will do nothing and return directly if req->status has been set to a non-zero value. This will cause driver hang whenever transfer time out is triggered. This patch fixes this issue. It could be backported to stable kernel with version later than v3.15. Cc: stable@vger.kernel.org # 3.15+ Cc: Alan Stern Signed-off-by: Lu Baolu Suggested-by: Alan Stern Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbtest.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 5e3464e8d4e5..5c8210dc6fd9 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -585,7 +585,6 @@ static void sg_timeout(unsigned long _req) { struct usb_sg_request *req = (struct usb_sg_request *) _req; - req->status = -ETIMEDOUT; usb_sg_cancel(req); } @@ -616,8 +615,10 @@ static int perform_sglist( mod_timer(&sg_timer, jiffies + msecs_to_jiffies(SIMPLE_IO_TIMEOUT)); usb_sg_wait(req); - del_timer_sync(&sg_timer); - retval = req->status; + if (!del_timer_sync(&sg_timer)) + retval = -ETIMEDOUT; + else + retval = req->status; /* FIXME check resulting data pattern */ -- cgit v1.2.3 From 2e81a4eeedcaa66e35f58b81e0755b87057ce392 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 11 Aug 2016 12:38:55 -0400 Subject: ext4: avoid deadlock when expanding inode size When we need to move xattrs into external xattr block, we call ext4_xattr_block_set() from ext4_expand_extra_isize_ea(). That may end up calling ext4_mark_inode_dirty() again which will recurse back into the inode expansion code leading to deadlocks. Protect from recursion using EXT4_STATE_NO_EXPAND inode flag and move its management into ext4_expand_extra_isize_ea() since its manipulation is safe there (due to xattr_sem) from possible races with ext4_xattr_set_handle() which plays with it as well. CC: stable@vger.kernel.org # 4.4.x Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o --- fs/ext4/inode.c | 2 -- fs/ext4/xattr.c | 19 +++++++++++++------ 2 files changed, 13 insertions(+), 8 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 5a6277d80f7c..13c95b290263 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -5466,8 +5466,6 @@ int ext4_mark_inode_dirty(handle_t *handle, struct inode *inode) sbi->s_want_extra_isize, iloc, handle); if (ret) { - ext4_set_inode_state(inode, - EXT4_STATE_NO_EXPAND); if (mnt_count != le16_to_cpu(sbi->s_es->s_mnt_count)) { ext4_warning(inode->i_sb, diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index c893f00b6dc0..2eb935ca5d9e 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1358,12 +1358,14 @@ int ext4_expand_extra_isize_ea(struct inode *inode, int new_extra_isize, int isize_diff; /* How much do we need to grow i_extra_isize */ down_write(&EXT4_I(inode)->xattr_sem); + /* + * Set EXT4_STATE_NO_EXPAND to avoid recursion when marking inode dirty + */ + ext4_set_inode_state(inode, EXT4_STATE_NO_EXPAND); retry: isize_diff = new_extra_isize - EXT4_I(inode)->i_extra_isize; - if (EXT4_I(inode)->i_extra_isize >= new_extra_isize) { - up_write(&EXT4_I(inode)->xattr_sem); - return 0; - } + if (EXT4_I(inode)->i_extra_isize >= new_extra_isize) + goto out; header = IHDR(inode, raw_inode); entry = IFIRST(header); @@ -1392,8 +1394,7 @@ retry: (void *)header, total_ino, inode->i_sb->s_blocksize); EXT4_I(inode)->i_extra_isize = new_extra_isize; - error = 0; - goto cleanup; + goto out; } /* @@ -1553,6 +1554,8 @@ retry: kfree(bs); } brelse(bh); +out: + ext4_clear_inode_state(inode, EXT4_STATE_NO_EXPAND); up_write(&EXT4_I(inode)->xattr_sem); return 0; @@ -1564,6 +1567,10 @@ cleanup: kfree(is); kfree(bs); brelse(bh); + /* + * We deliberately leave EXT4_STATE_NO_EXPAND set here since inode + * size expansion failed. + */ up_write(&EXT4_I(inode)->xattr_sem); return error; } -- cgit v1.2.3 From 104a493390940e85fb7c840a9fd5214aba5cb3bd Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Thu, 11 Aug 2016 18:15:56 +0800 Subject: macvtap: fix use after free for skb_array during release We've clean skb_array in macvtap_put_queue() but still try to pop from it during macvtap_sock_destruct(). Fix this use after free by moving the skb array cleanup to macvtap_sock_destruct() instead. Fixes: 362899b8725b ("macvtap: switch to use skb array") Reported-by: Cornelia Huck Tested-by: Cornelia Huck Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/macvtap.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index a38c0dac514b..070e3290aa6e 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -275,7 +275,6 @@ static void macvtap_put_queue(struct macvtap_queue *q) rtnl_unlock(); synchronize_rcu(); - skb_array_cleanup(&q->skb_array); sock_put(&q->sk); } @@ -533,10 +532,8 @@ static void macvtap_sock_write_space(struct sock *sk) static void macvtap_sock_destruct(struct sock *sk) { struct macvtap_queue *q = container_of(sk, struct macvtap_queue, sk); - struct sk_buff *skb; - while ((skb = skb_array_consume(&q->skb_array)) != NULL) - kfree_skb(skb); + skb_array_cleanup(&q->skb_array); } static int macvtap_open(struct inode *inode, struct file *file) -- cgit v1.2.3 From bbe11fab0b6c1d113776b2898e085bf4d1fdc607 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Thu, 11 Aug 2016 15:24:27 +0200 Subject: macsec: use after free when deleting the underlying device macsec_notify() loops over the list of macsec devices configured on the underlying device when this device is being removed. This list is part of the rx_handler data. However, macsec_dellink unregisters the rx_handler and frees the rx_handler data when the last macsec device is removed from the underlying device. Add macsec_common_dellink() to delete macsec devices without unregistering the rx_handler and freeing the associated data. Fixes: 960d5848dbf1 ("macsec: fix memory leaks around rx_handler (un)registration") Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller --- drivers/net/macsec.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index d13e6e15d7b5..dbd590a8177f 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -3047,22 +3047,29 @@ static void macsec_del_dev(struct macsec_dev *macsec) } } +static void macsec_common_dellink(struct net_device *dev, struct list_head *head) +{ + struct macsec_dev *macsec = macsec_priv(dev); + + unregister_netdevice_queue(dev, head); + list_del_rcu(&macsec->secys); + macsec_del_dev(macsec); + + macsec_generation++; +} + static void macsec_dellink(struct net_device *dev, struct list_head *head) { struct macsec_dev *macsec = macsec_priv(dev); struct net_device *real_dev = macsec->real_dev; struct macsec_rxh_data *rxd = macsec_data_rtnl(real_dev); - macsec_generation++; + macsec_common_dellink(dev, head); - unregister_netdevice_queue(dev, head); - list_del_rcu(&macsec->secys); if (list_empty(&rxd->secys)) { netdev_rx_handler_unregister(real_dev); kfree(rxd); } - - macsec_del_dev(macsec); } static int register_macsec_dev(struct net_device *real_dev, @@ -3382,8 +3389,12 @@ static int macsec_notify(struct notifier_block *this, unsigned long event, rxd = macsec_data_rtnl(real_dev); list_for_each_entry_safe(m, n, &rxd->secys, secys) { - macsec_dellink(m->secy.netdev, &head); + macsec_common_dellink(m->secy.netdev, &head); } + + netdev_rx_handler_unregister(real_dev); + kfree(rxd); + unregister_netdevice_many(&head); break; } -- cgit v1.2.3 From 9b4b3f6a062b22550e62523efe5213776cdd426b Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 11 Aug 2016 07:26:01 -0700 Subject: ahci: disable correct irq for dummy ports irq already contains the interrupt number for the port, don't add the port index to it. Signed-off-by: Christoph Hellwig Signed-off-by: Tejun Heo Fixes: d684a90d38e2 ("ahci: per-port msix support") Cc: stable@vger.kernel.org v4.5+ --- drivers/ata/libahci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 7461a587b39b..dcf2c724fd06 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -2524,7 +2524,7 @@ static int ahci_host_activate_multi_irqs(struct ata_host *host, /* Do not receive interrupts sent by dummy ports */ if (!pp) { - disable_irq(irq + i); + disable_irq(irq); continue; } -- cgit v1.2.3 From a3f457d9636b3f5ae4fc6502cb0c95f60f5e342b Mon Sep 17 00:00:00 2001 From: Chris Zhong Date: Tue, 9 Aug 2016 11:02:33 -0700 Subject: clk: rockchip: fix rk3399 aclk_vio gate bit Fix incorrect rk3399 aclk_vio gating bit, it should be 0, not 10. Fixes: 115510053e5e ("clk: rockchip: add clock controller for the RK3399") Signed-off-by: Chris Zhong Reviewed-by: Xing Zheng Reviewed-by: Guenter Roeck Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3399.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index c109d80e7a8a..314eab67bc0f 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -1071,7 +1071,7 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = { /* vio */ COMPOSITE(ACLK_VIO, "aclk_vio", mux_pll_src_cpll_gpll_ppll_p, CLK_IGNORE_UNUSED, RK3399_CLKSEL_CON(42), 6, 2, MFLAGS, 0, 5, DFLAGS, - RK3399_CLKGATE_CON(11), 10, GFLAGS), + RK3399_CLKGATE_CON(11), 0, GFLAGS), COMPOSITE_NOMUX(PCLK_VIO, "pclk_vio", "aclk_vio", 0, RK3399_CLKSEL_CON(43), 0, 5, DFLAGS, RK3399_CLKGATE_CON(11), 1, GFLAGS), -- cgit v1.2.3 From e0cb1b84163720ec67ff0e54397fd3f57ad4a4dd Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 10 Aug 2016 09:29:43 +0200 Subject: clk: renesas: r8a7795: Fix SD clocks According to the datasheet, SDn clocks are from the SDSRC clock. And the SDSRC has a 1/2 divider. So, we should have ".sdsrc" as an internal core clock. Otherwise, since the sdhi driver will calculate clock for a sd card using the wrong parent clock rate, and then performance will be not good. Fixes: 90c073e53909da85 ("clk: shmobile: r8a7795: Add SD divider support") Signed-off-by: Yoshihiro Shimoda Acked-by: Dirk Behme Tested-by: Wolfram Sang Signed-off-by: Geert Uytterhoeven Cc: stable@vger.kernel.org Signed-off-by: Stephen Boyd --- drivers/clk/renesas/r8a7795-cpg-mssr.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/clk/renesas/r8a7795-cpg-mssr.c b/drivers/clk/renesas/r8a7795-cpg-mssr.c index d359c92e13a6..e38bf60c0ff4 100644 --- a/drivers/clk/renesas/r8a7795-cpg-mssr.c +++ b/drivers/clk/renesas/r8a7795-cpg-mssr.c @@ -69,6 +69,7 @@ static const struct cpg_core_clk r8a7795_core_clks[] __initconst = { DEF_FIXED(".s1", CLK_S1, CLK_PLL1_DIV2, 3, 1), DEF_FIXED(".s2", CLK_S2, CLK_PLL1_DIV2, 4, 1), DEF_FIXED(".s3", CLK_S3, CLK_PLL1_DIV2, 6, 1), + DEF_FIXED(".sdsrc", CLK_SDSRC, CLK_PLL1_DIV2, 2, 1), /* Core Clock Outputs */ DEF_FIXED("ztr", R8A7795_CLK_ZTR, CLK_PLL1_DIV2, 6, 1), @@ -87,10 +88,10 @@ static const struct cpg_core_clk r8a7795_core_clks[] __initconst = { DEF_FIXED("s3d2", R8A7795_CLK_S3D2, CLK_S3, 2, 1), DEF_FIXED("s3d4", R8A7795_CLK_S3D4, CLK_S3, 4, 1), - DEF_GEN3_SD("sd0", R8A7795_CLK_SD0, CLK_PLL1_DIV2, 0x0074), - DEF_GEN3_SD("sd1", R8A7795_CLK_SD1, CLK_PLL1_DIV2, 0x0078), - DEF_GEN3_SD("sd2", R8A7795_CLK_SD2, CLK_PLL1_DIV2, 0x0268), - DEF_GEN3_SD("sd3", R8A7795_CLK_SD3, CLK_PLL1_DIV2, 0x026c), + DEF_GEN3_SD("sd0", R8A7795_CLK_SD0, CLK_SDSRC, 0x0074), + DEF_GEN3_SD("sd1", R8A7795_CLK_SD1, CLK_SDSRC, 0x0078), + DEF_GEN3_SD("sd2", R8A7795_CLK_SD2, CLK_SDSRC, 0x0268), + DEF_GEN3_SD("sd3", R8A7795_CLK_SD3, CLK_SDSRC, 0x026c), DEF_FIXED("cl", R8A7795_CLK_CL, CLK_PLL1_DIV2, 48, 1), DEF_FIXED("cp", R8A7795_CLK_CP, CLK_EXTAL, 2, 1), -- cgit v1.2.3 From aa8b187eeab5e6757e959b81889ddbfda7d02ad1 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 9 Aug 2016 22:09:19 -0700 Subject: hwmon: (it87) Features mask must be 32 bit wide Coverity reports: result_independent_of_operands: data->features & (65536UL /* 1UL << 16 */) is always 0 regardless of the values of its operands. This occurs as the logical operand of if. data->features needs to be 32 bit wide since there are more than 16 features. Fixes: cc18da79d9b7 ("hwmon: (it87) Support up to 6 temperature sensors ... "); Signed-off-by: Guenter Roeck --- drivers/hwmon/it87.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 730d84028260..d0203a115eff 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -491,7 +491,7 @@ struct it87_sio_data { struct it87_data { const struct attribute_group *groups[7]; enum chips type; - u16 features; + u32 features; u8 peci_mask; u8 old_peci_mask; -- cgit v1.2.3 From 20c389e656a89e2302017bf3f499cb5a31a2a7ba Mon Sep 17 00:00:00 2001 From: Xing Zheng Date: Tue, 2 Aug 2016 15:19:58 +0800 Subject: clk: rockchip: fix incorrect aclk_emmc source gate bits on rk3399 Dues to incorrect diagram, we need to fix incorrect bits for (c/g)pll_aclk_emmc_src: cpll_aclk_emmc_src --> G6[13] gpll_aclk_emmc_src --> G6[12] Fixes: 115510053e5e ("clk: rockchip: add clock controller for the RK3399") Signed-off-by: Xing Zheng Reviewed-by: Shawn Lin Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3399.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index 314eab67bc0f..01fa60ebd6d4 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -923,9 +923,9 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = { RK3399_CLKGATE_CON(6), 14, GFLAGS), GATE(0, "cpll_aclk_emmc_src", "cpll", CLK_IGNORE_UNUSED, - RK3399_CLKGATE_CON(6), 12, GFLAGS), - GATE(0, "gpll_aclk_emmc_src", "gpll", CLK_IGNORE_UNUSED, RK3399_CLKGATE_CON(6), 13, GFLAGS), + GATE(0, "gpll_aclk_emmc_src", "gpll", CLK_IGNORE_UNUSED, + RK3399_CLKGATE_CON(6), 12, GFLAGS), COMPOSITE_NOGATE(ACLK_EMMC, "aclk_emmc", mux_aclk_emmc_p, CLK_IGNORE_UNUSED, RK3399_CLKSEL_CON(21), 7, 1, MFLAGS, 0, 5, DFLAGS), GATE(ACLK_EMMC_CORE, "aclk_emmccore", "aclk_emmc", CLK_IGNORE_UNUSED, -- cgit v1.2.3 From b33ecca87df99fa6fff8a1d455de96f436934dcf Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 8 Aug 2016 21:55:39 +0200 Subject: phy-sun4i-usb: Add support for peripheral-only mode Use the new of_usb_get_dr_mode_by_phy() function to get the dr_mode from the musb controller node instead of assuming that having an id_det gpio means otg mode, and not having one means host mode. Implement peripheral-only mode by adding a sun4i_usb_phy0_get_id_det helper which looks at the dr_mode, always registering our extcon and always monitoring vbus. If dr_mode is not specified in the dts, do not register phy0 as we then do not know how to treat it. This is actually a good thing as this means we will not be registering phy0 on devices where the otg controller is not enabled in the devicetree. Signed-off-by: Hans de Goede Acked-by: Kishon Vijay Abraham I Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-sun4i-usb.c | 68 ++++++++++++++++++++++++++++++--------------- 1 file changed, 46 insertions(+), 22 deletions(-) diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index 0a45bc6088ae..8c7eb335622e 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #define REG_ISCR 0x00 @@ -110,6 +111,7 @@ struct sun4i_usb_phy_cfg { struct sun4i_usb_phy_data { void __iomem *base; const struct sun4i_usb_phy_cfg *cfg; + enum usb_dr_mode dr_mode; struct mutex mutex; struct sun4i_usb_phy { struct phy *phy; @@ -120,6 +122,7 @@ struct sun4i_usb_phy_data { bool regulator_on; int index; } phys[MAX_PHYS]; + int first_phy; /* phy0 / otg related variables */ struct extcon_dev *extcon; bool phy0_init; @@ -285,16 +288,10 @@ static int sun4i_usb_phy_init(struct phy *_phy) sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_DPDM_PULLUP_EN); sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_ID_PULLUP_EN); - if (data->id_det_gpio) { - /* OTG mode, force ISCR and cable state updates */ - data->id_det = -1; - data->vbus_det = -1; - queue_delayed_work(system_wq, &data->detect, 0); - } else { - /* Host only mode */ - sun4i_usb_phy0_set_id_detect(_phy, 0); - sun4i_usb_phy0_set_vbus_detect(_phy, 1); - } + /* Force ISCR and cable state updates */ + data->id_det = -1; + data->vbus_det = -1; + queue_delayed_work(system_wq, &data->detect, 0); } return 0; @@ -319,6 +316,19 @@ static int sun4i_usb_phy_exit(struct phy *_phy) return 0; } +static int sun4i_usb_phy0_get_id_det(struct sun4i_usb_phy_data *data) +{ + switch (data->dr_mode) { + case USB_DR_MODE_OTG: + return gpiod_get_value_cansleep(data->id_det_gpio); + case USB_DR_MODE_HOST: + return 0; + case USB_DR_MODE_PERIPHERAL: + default: + return 1; + } +} + static int sun4i_usb_phy0_get_vbus_det(struct sun4i_usb_phy_data *data) { if (data->vbus_det_gpio) @@ -432,7 +442,10 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work) struct phy *phy0 = data->phys[0].phy; int id_det, vbus_det, id_notify = 0, vbus_notify = 0; - id_det = gpiod_get_value_cansleep(data->id_det_gpio); + if (phy0 == NULL) + return; + + id_det = sun4i_usb_phy0_get_id_det(data); vbus_det = sun4i_usb_phy0_get_vbus_det(data); mutex_lock(&phy0->mutex); @@ -448,7 +461,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work) * without vbus detection report vbus low for long enough for * the musb-ip to end the current device session. */ - if (!sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) { + if (data->dr_mode == USB_DR_MODE_OTG && + !sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) { sun4i_usb_phy0_set_vbus_detect(phy0, 0); msleep(200); sun4i_usb_phy0_set_vbus_detect(phy0, 1); @@ -474,7 +488,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work) * without vbus detection report vbus low for long enough to * the musb-ip to end the current host session. */ - if (!sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) { + if (data->dr_mode == USB_DR_MODE_OTG && + !sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) { mutex_lock(&phy0->mutex); sun4i_usb_phy0_set_vbus_detect(phy0, 0); msleep(1000); @@ -519,7 +534,8 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev, { struct sun4i_usb_phy_data *data = dev_get_drvdata(dev); - if (args->args[0] >= data->cfg->num_phys) + if (args->args[0] < data->first_phy || + args->args[0] >= data->cfg->num_phys) return ERR_PTR(-ENODEV); return data->phys[args->args[0]].phy; @@ -593,13 +609,17 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) return -EPROBE_DEFER; } - /* vbus_det without id_det makes no sense, and is not supported */ - if (sun4i_usb_phy0_have_vbus_det(data) && !data->id_det_gpio) { - dev_err(dev, "usb0_id_det missing or invalid\n"); - return -ENODEV; - } - - if (data->id_det_gpio) { + data->dr_mode = of_usb_get_dr_mode_by_phy(np, 0); + switch (data->dr_mode) { + case USB_DR_MODE_OTG: + /* otg without id_det makes no sense, and is not supported */ + if (!data->id_det_gpio) { + dev_err(dev, "usb0_id_det missing or invalid\n"); + return -ENODEV; + } + /* fall through */ + case USB_DR_MODE_HOST: + case USB_DR_MODE_PERIPHERAL: data->extcon = devm_extcon_dev_allocate(dev, sun4i_usb_phy0_cable); if (IS_ERR(data->extcon)) @@ -610,9 +630,13 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) dev_err(dev, "failed to register extcon: %d\n", ret); return ret; } + break; + default: + dev_info(dev, "dr_mode unknown, not registering usb phy0\n"); + data->first_phy = 1; } - for (i = 0; i < data->cfg->num_phys; i++) { + for (i = data->first_phy; i < data->cfg->num_phys; i++) { struct sun4i_usb_phy *phy = data->phys + i; char name[16]; -- cgit v1.2.3 From 1766e7b3763a0707c2fda9689a7866dceed07b7a Mon Sep 17 00:00:00 2001 From: David Lechner Date: Wed, 10 Aug 2016 18:49:27 +0530 Subject: mfd: da8xx-cfgchip: New header file for CFGCHIP registers Create a new header file for TI DA8XX SoC CFGCHIPx registers. This will be used by a number of planned drivers including a new USB PHY driver and common clock framework drivers. The same defines *will* be removed from the platform_data header, once all the users start using the new syscon device header. This also fixes the following compiler error caused due to a dependent patch not merged. drivers/phy/phy-da8xx-usb.c:19:37: fatal error: linux/mfd/da8xx-cfgchip.h: No such file or directory #include Signed-off-by: David Lechner Acked-by: Lee Jones Reported-by: Arnd Bergmann Signed-off-by: Kishon Vijay Abraham I --- include/linux/mfd/da8xx-cfgchip.h | 153 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 include/linux/mfd/da8xx-cfgchip.h diff --git a/include/linux/mfd/da8xx-cfgchip.h b/include/linux/mfd/da8xx-cfgchip.h new file mode 100644 index 000000000000..304985e288d2 --- /dev/null +++ b/include/linux/mfd/da8xx-cfgchip.h @@ -0,0 +1,153 @@ +/* + * TI DaVinci DA8xx CHIPCFGx registers for syscon consumers. + * + * Copyright (C) 2016 David Lechner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_MFD_DA8XX_CFGCHIP_H +#define __LINUX_MFD_DA8XX_CFGCHIP_H + +#include + +/* register offset (32-bit registers) */ +#define CFGCHIP(n) ((n) * 4) + +/* CFGCHIP0 (PLL0/EDMA3_0) register bits */ +#define CFGCHIP0_PLL_MASTER_LOCK BIT(4) +#define CFGCHIP0_EDMA30TC1DBS(n) ((n) << 2) +#define CFGCHIP0_EDMA30TC1DBS_MASK CFGCHIP0_EDMA30TC1DBS(0x3) +#define CFGCHIP0_EDMA30TC1DBS_16 CFGCHIP0_EDMA30TC1DBS(0x0) +#define CFGCHIP0_EDMA30TC1DBS_32 CFGCHIP0_EDMA30TC1DBS(0x1) +#define CFGCHIP0_EDMA30TC1DBS_64 CFGCHIP0_EDMA30TC1DBS(0x2) +#define CFGCHIP0_EDMA30TC0DBS(n) ((n) << 0) +#define CFGCHIP0_EDMA30TC0DBS_MASK CFGCHIP0_EDMA30TC0DBS(0x3) +#define CFGCHIP0_EDMA30TC0DBS_16 CFGCHIP0_EDMA30TC0DBS(0x0) +#define CFGCHIP0_EDMA30TC0DBS_32 CFGCHIP0_EDMA30TC0DBS(0x1) +#define CFGCHIP0_EDMA30TC0DBS_64 CFGCHIP0_EDMA30TC0DBS(0x2) + +/* CFGCHIP1 (eCAP/HPI/EDMA3_1/eHRPWM TBCLK/McASP0 AMUTEIN) register bits */ +#define CFGCHIP1_CAP2SRC(n) ((n) << 27) +#define CFGCHIP1_CAP2SRC_MASK CFGCHIP1_CAP2SRC(0x1f) +#define CFGCHIP1_CAP2SRC_ECAP_PIN CFGCHIP1_CAP2SRC(0x0) +#define CFGCHIP1_CAP2SRC_MCASP0_TX CFGCHIP1_CAP2SRC(0x1) +#define CFGCHIP1_CAP2SRC_MCASP0_RX CFGCHIP1_CAP2SRC(0x2) +#define CFGCHIP1_CAP2SRC_EMAC_C0_RX_THRESHOLD CFGCHIP1_CAP2SRC(0x7) +#define CFGCHIP1_CAP2SRC_EMAC_C0_RX CFGCHIP1_CAP2SRC(0x8) +#define CFGCHIP1_CAP2SRC_EMAC_C0_TX CFGCHIP1_CAP2SRC(0x9) +#define CFGCHIP1_CAP2SRC_EMAC_C0_MISC CFGCHIP1_CAP2SRC(0xa) +#define CFGCHIP1_CAP2SRC_EMAC_C1_RX_THRESHOLD CFGCHIP1_CAP2SRC(0xb) +#define CFGCHIP1_CAP2SRC_EMAC_C1_RX CFGCHIP1_CAP2SRC(0xc) +#define CFGCHIP1_CAP2SRC_EMAC_C1_TX CFGCHIP1_CAP2SRC(0xd) +#define CFGCHIP1_CAP2SRC_EMAC_C1_MISC CFGCHIP1_CAP2SRC(0xe) +#define CFGCHIP1_CAP2SRC_EMAC_C2_RX_THRESHOLD CFGCHIP1_CAP2SRC(0xf) +#define CFGCHIP1_CAP2SRC_EMAC_C2_RX CFGCHIP1_CAP2SRC(0x10) +#define CFGCHIP1_CAP2SRC_EMAC_C2_TX CFGCHIP1_CAP2SRC(0x11) +#define CFGCHIP1_CAP2SRC_EMAC_C2_MISC CFGCHIP1_CAP2SRC(0x12) +#define CFGCHIP1_CAP1SRC(n) ((n) << 22) +#define CFGCHIP1_CAP1SRC_MASK CFGCHIP1_CAP1SRC(0x1f) +#define CFGCHIP1_CAP1SRC_ECAP_PIN CFGCHIP1_CAP1SRC(0x0) +#define CFGCHIP1_CAP1SRC_MCASP0_TX CFGCHIP1_CAP1SRC(0x1) +#define CFGCHIP1_CAP1SRC_MCASP0_RX CFGCHIP1_CAP1SRC(0x2) +#define CFGCHIP1_CAP1SRC_EMAC_C0_RX_THRESHOLD CFGCHIP1_CAP1SRC(0x7) +#define CFGCHIP1_CAP1SRC_EMAC_C0_RX CFGCHIP1_CAP1SRC(0x8) +#define CFGCHIP1_CAP1SRC_EMAC_C0_TX CFGCHIP1_CAP1SRC(0x9) +#define CFGCHIP1_CAP1SRC_EMAC_C0_MISC CFGCHIP1_CAP1SRC(0xa) +#define CFGCHIP1_CAP1SRC_EMAC_C1_RX_THRESHOLD CFGCHIP1_CAP1SRC(0xb) +#define CFGCHIP1_CAP1SRC_EMAC_C1_RX CFGCHIP1_CAP1SRC(0xc) +#define CFGCHIP1_CAP1SRC_EMAC_C1_TX CFGCHIP1_CAP1SRC(0xd) +#define CFGCHIP1_CAP1SRC_EMAC_C1_MISC CFGCHIP1_CAP1SRC(0xe) +#define CFGCHIP1_CAP1SRC_EMAC_C2_RX_THRESHOLD CFGCHIP1_CAP1SRC(0xf) +#define CFGCHIP1_CAP1SRC_EMAC_C2_RX CFGCHIP1_CAP1SRC(0x10) +#define CFGCHIP1_CAP1SRC_EMAC_C2_TX CFGCHIP1_CAP1SRC(0x11) +#define CFGCHIP1_CAP1SRC_EMAC_C2_MISC CFGCHIP1_CAP1SRC(0x12) +#define CFGCHIP1_CAP0SRC(n) ((n) << 17) +#define CFGCHIP1_CAP0SRC_MASK CFGCHIP1_CAP0SRC(0x1f) +#define CFGCHIP1_CAP0SRC_ECAP_PIN CFGCHIP1_CAP0SRC(0x0) +#define CFGCHIP1_CAP0SRC_MCASP0_TX CFGCHIP1_CAP0SRC(0x1) +#define CFGCHIP1_CAP0SRC_MCASP0_RX CFGCHIP1_CAP0SRC(0x2) +#define CFGCHIP1_CAP0SRC_EMAC_C0_RX_THRESHOLD CFGCHIP1_CAP0SRC(0x7) +#define CFGCHIP1_CAP0SRC_EMAC_C0_RX CFGCHIP1_CAP0SRC(0x8) +#define CFGCHIP1_CAP0SRC_EMAC_C0_TX CFGCHIP1_CAP0SRC(0x9) +#define CFGCHIP1_CAP0SRC_EMAC_C0_MISC CFGCHIP1_CAP0SRC(0xa) +#define CFGCHIP1_CAP0SRC_EMAC_C1_RX_THRESHOLD CFGCHIP1_CAP0SRC(0xb) +#define CFGCHIP1_CAP0SRC_EMAC_C1_RX CFGCHIP1_CAP0SRC(0xc) +#define CFGCHIP1_CAP0SRC_EMAC_C1_TX CFGCHIP1_CAP0SRC(0xd) +#define CFGCHIP1_CAP0SRC_EMAC_C1_MISC CFGCHIP1_CAP0SRC(0xe) +#define CFGCHIP1_CAP0SRC_EMAC_C2_RX_THRESHOLD CFGCHIP1_CAP0SRC(0xf) +#define CFGCHIP1_CAP0SRC_EMAC_C2_RX CFGCHIP1_CAP0SRC(0x10) +#define CFGCHIP1_CAP0SRC_EMAC_C2_TX CFGCHIP1_CAP0SRC(0x11) +#define CFGCHIP1_CAP0SRC_EMAC_C2_MISC CFGCHIP1_CAP0SRC(0x12) +#define CFGCHIP1_HPIBYTEAD BIT(16) +#define CFGCHIP1_HPIENA BIT(15) +#define CFGCHIP0_EDMA31TC0DBS(n) ((n) << 13) +#define CFGCHIP0_EDMA31TC0DBS_MASK CFGCHIP0_EDMA31TC0DBS(0x3) +#define CFGCHIP0_EDMA31TC0DBS_16 CFGCHIP0_EDMA31TC0DBS(0x0) +#define CFGCHIP0_EDMA31TC0DBS_32 CFGCHIP0_EDMA31TC0DBS(0x1) +#define CFGCHIP0_EDMA31TC0DBS_64 CFGCHIP0_EDMA31TC0DBS(0x2) +#define CFGCHIP1_TBCLKSYNC BIT(12) +#define CFGCHIP1_AMUTESEL0(n) ((n) << 0) +#define CFGCHIP1_AMUTESEL0_MASK CFGCHIP1_AMUTESEL0(0xf) +#define CFGCHIP1_AMUTESEL0_LOW CFGCHIP1_AMUTESEL0(0x0) +#define CFGCHIP1_AMUTESEL0_BANK_0 CFGCHIP1_AMUTESEL0(0x1) +#define CFGCHIP1_AMUTESEL0_BANK_1 CFGCHIP1_AMUTESEL0(0x2) +#define CFGCHIP1_AMUTESEL0_BANK_2 CFGCHIP1_AMUTESEL0(0x3) +#define CFGCHIP1_AMUTESEL0_BANK_3 CFGCHIP1_AMUTESEL0(0x4) +#define CFGCHIP1_AMUTESEL0_BANK_4 CFGCHIP1_AMUTESEL0(0x5) +#define CFGCHIP1_AMUTESEL0_BANK_5 CFGCHIP1_AMUTESEL0(0x6) +#define CFGCHIP1_AMUTESEL0_BANK_6 CFGCHIP1_AMUTESEL0(0x7) +#define CFGCHIP1_AMUTESEL0_BANK_7 CFGCHIP1_AMUTESEL0(0x8) + +/* CFGCHIP2 (USB PHY) register bits */ +#define CFGCHIP2_PHYCLKGD BIT(17) +#define CFGCHIP2_VBUSSENSE BIT(16) +#define CFGCHIP2_RESET BIT(15) +#define CFGCHIP2_OTGMODE(n) ((n) << 13) +#define CFGCHIP2_OTGMODE_MASK CFGCHIP2_OTGMODE(0x3) +#define CFGCHIP2_OTGMODE_NO_OVERRIDE CFGCHIP2_OTGMODE(0x0) +#define CFGCHIP2_OTGMODE_FORCE_HOST CFGCHIP2_OTGMODE(0x1) +#define CFGCHIP2_OTGMODE_FORCE_DEVICE CFGCHIP2_OTGMODE(0x2) +#define CFGCHIP2_OTGMODE_FORCE_HOST_VBUS_LOW CFGCHIP2_OTGMODE(0x3) +#define CFGCHIP2_USB1PHYCLKMUX BIT(12) +#define CFGCHIP2_USB2PHYCLKMUX BIT(11) +#define CFGCHIP2_PHYPWRDN BIT(10) +#define CFGCHIP2_OTGPWRDN BIT(9) +#define CFGCHIP2_DATPOL BIT(8) +#define CFGCHIP2_USB1SUSPENDM BIT(7) +#define CFGCHIP2_PHY_PLLON BIT(6) +#define CFGCHIP2_SESENDEN BIT(5) +#define CFGCHIP2_VBDTCTEN BIT(4) +#define CFGCHIP2_REFFREQ(n) ((n) << 0) +#define CFGCHIP2_REFFREQ_MASK CFGCHIP2_REFFREQ(0xf) +#define CFGCHIP2_REFFREQ_12MHZ CFGCHIP2_REFFREQ(0x1) +#define CFGCHIP2_REFFREQ_24MHZ CFGCHIP2_REFFREQ(0x2) +#define CFGCHIP2_REFFREQ_48MHZ CFGCHIP2_REFFREQ(0x3) +#define CFGCHIP2_REFFREQ_19_2MHZ CFGCHIP2_REFFREQ(0x4) +#define CFGCHIP2_REFFREQ_38_4MHZ CFGCHIP2_REFFREQ(0x5) +#define CFGCHIP2_REFFREQ_13MHZ CFGCHIP2_REFFREQ(0x6) +#define CFGCHIP2_REFFREQ_26MHZ CFGCHIP2_REFFREQ(0x7) +#define CFGCHIP2_REFFREQ_20MHZ CFGCHIP2_REFFREQ(0x8) +#define CFGCHIP2_REFFREQ_40MHZ CFGCHIP2_REFFREQ(0x9) + +/* CFGCHIP3 (EMAC/uPP/PLL1/ASYNC3/PRU/DIV4.5/EMIFA) register bits */ +#define CFGCHIP3_RMII_SEL BIT(8) +#define CFGCHIP3_UPP_TX_CLKSRC BIT(6) +#define CFGCHIP3_PLL1_MASTER_LOCK BIT(5) +#define CFGCHIP3_ASYNC3_CLKSRC BIT(4) +#define CFGCHIP3_PRUEVTSEL BIT(3) +#define CFGCHIP3_DIV45PENA BIT(2) +#define CFGCHIP3_EMA_CLKSRC BIT(1) + +/* CFGCHIP4 (McASP0 AMUNTEIN) register bits */ +#define CFGCHIP4_AMUTECLR0 BIT(0) + +#endif /* __LINUX_MFD_DA8XX_CFGCHIP_H */ -- cgit v1.2.3 From bf8ca651e1f8f054b39b6b3b95d6f515c3c857d5 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 10 Aug 2016 18:04:44 +0800 Subject: phy: brcm-sata: Return proper error if brcm_sata_phy_init fails Return proper error instead of 0 if brcm_sata_phy_init fails. Signed-off-by: Axel Lin Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-brcm-sata.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/phy-brcm-sata.c b/drivers/phy/phy-brcm-sata.c index 18d662610075..8ffc44afdb75 100644 --- a/drivers/phy/phy-brcm-sata.c +++ b/drivers/phy/phy-brcm-sata.c @@ -367,7 +367,7 @@ static int brcm_sata_phy_init(struct phy *phy) rc = -ENODEV; }; - return 0; + return rc; } static const struct phy_ops phy_ops = { -- cgit v1.2.3 From 017300da3a4547d85e52c2484fc0bd759e1bbcdb Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Wed, 6 Jul 2016 08:00:06 +0200 Subject: phy: sun9i-usb: fix error handling This is likely that checking 'phy->hsic_clk' instead of 'phy->clk' is expected here. Signed-off-by: Christophe JAILLET Acked-by: Chen-Yu Tsai --- drivers/phy/phy-sun9i-usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/phy/phy-sun9i-usb.c b/drivers/phy/phy-sun9i-usb.c index ac4f31abefe3..28fce4bce638 100644 --- a/drivers/phy/phy-sun9i-usb.c +++ b/drivers/phy/phy-sun9i-usb.c @@ -141,9 +141,9 @@ static int sun9i_usb_phy_probe(struct platform_device *pdev) } phy->hsic_clk = devm_clk_get(dev, "hsic_12M"); - if (IS_ERR(phy->clk)) { + if (IS_ERR(phy->hsic_clk)) { dev_err(dev, "failed to get hsic_12M clock\n"); - return PTR_ERR(phy->clk); + return PTR_ERR(phy->hsic_clk); } phy->reset = devm_reset_control_get(dev, "hsic"); -- cgit v1.2.3 From 979cf59acc9d634cc140aadd0d2915947ab303cc Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 12 Aug 2016 11:45:18 +0000 Subject: ASoC: Intel: Skylake: Fix error return code in skl_probe() Fix to return error code -ENODEV from the error handling case instead of 0, as done elsewhere in this function. Fixes: 87b2bdf02278 ("ASoC: Intel: Skylake: Initialize NHLT table") Signed-off-by: Wei Yongjun Acked-By: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index cd59536a761d..e3e764167765 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -672,8 +672,10 @@ static int skl_probe(struct pci_dev *pci, skl->nhlt = skl_nhlt_init(bus->dev); - if (skl->nhlt == NULL) + if (skl->nhlt == NULL) { + err = -ENODEV; goto out_free; + } skl_nhlt_update_topology_bin(skl); -- cgit v1.2.3 From 4a008c002133aba0276cbc5d116bbb774aaf1b0d Mon Sep 17 00:00:00 2001 From: Thilo Cestonaro Date: Fri, 12 Aug 2016 14:39:10 +0200 Subject: hwmon: (ftsteutates) Correct ftp urls in driver documentation Signed-off-by: Thilo Cestonaro Signed-off-by: Guenter Roeck --- Documentation/hwmon/ftsteutates | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/hwmon/ftsteutates b/Documentation/hwmon/ftsteutates index 2a1bf69c6a26..8c10a916de20 100644 --- a/Documentation/hwmon/ftsteutates +++ b/Documentation/hwmon/ftsteutates @@ -19,5 +19,5 @@ enhancements. It can monitor up to 4 voltages, 16 temperatures and implemented in this driver. Specification of the chip can be found here: -ftp:///pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf -ftp:///pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf +ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf +ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf -- cgit v1.2.3 From 4608d96fb491125657fd8183a35921e4d4e27bc8 Mon Sep 17 00:00:00 2001 From: Xing Zheng Date: Tue, 2 Aug 2016 15:19:57 +0800 Subject: clk: rockchip: fix incorrect GATE bits for {c, g}pll_aclk_perihp_src on rk3399 Sorry to refer incorrect clock diagram, we double check it that the bits configuration of the Xpll_aclk_perihp_src need to be fixed: bit 1 - shows aclk_perihp_cpll_src_en bit 0 - shows aclk_perihp_gpll_src_en Through the testing that plug/unplug the USB ethernet cable on the RK3399 kevin board. 1. the hclk_host0 and hclk_host1 are endpoint clocks: cpll --> G5[1] --> aclk_perihp_cpll_src --\ |--> hclk_host0 | --> ... ---> | gpll --> G5[0] --> aclk_perihp_gpll_src --/ |--> hclk_host1 2. there is no clock below the cpll_aclk_perihp_src, and the hclk_hostX are below the gpll_aclk_perihp_src: pll_cpll 1 1 800000000 0 0 cpll 7 19 800000000 0 0 cpll_aclk_perihp_src 0 0 800000000 0 0 ... pll_gpll 1 1 594000000 0 0 gpll 10 10 594000000 0 0 gpll_aclk_perihp_src 2 2 594000000 0 0 hclk_perihp 5 5 74250000 0 0 hclk_host1_arb 2 2 74250000 0 0 hclk_host1 2 2 74250000 0 0 hclk_host0_arb 2 2 74250000 0 0 hclk_host0 2 2 74250000 0 0 3. by default, G5[0] and G5[1] are enabled: localhost ~ # mem r 0xff760314 0x000003e0 4. close the G5[1] (aclk_perihp_cpll_src), and plug/unplug USB ethernet cable, the DUT still works well: localhost ~ # mem w 0xff760314 0xffff03e2 localhost ~ # mem r 0xff760314 0x000003e2 plug/unplug, the work statue is ok 5. close the G5[0] (aclk_perihp_gpll_src), , and plug/unplug USB ethernet cable, the DUT will be crashed: localhost ~ # mem w 0xff760314 0xffff03e1 localhost ~ # mem r 0xff760314 0x000003e1 plug/unplug, the DUT is crashed Summary: bit 1 - shows aclk_perihp_cpll_src_en bit 0 - shows aclk_perihp_gpll_src_en Fixes: 3bd14ae9da91 ("clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src") Signed-off-by: Xing Zheng [here the clock-documentation in the manual was actually stating the wrong bits and thus only Xing's testing above revealed the issue] Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3399.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index 01fa60ebd6d4..ec5b2fd77c50 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -833,9 +833,9 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = { /* perihp */ GATE(0, "cpll_aclk_perihp_src", "cpll", CLK_IGNORE_UNUSED, - RK3399_CLKGATE_CON(5), 0, GFLAGS), - GATE(0, "gpll_aclk_perihp_src", "gpll", CLK_IGNORE_UNUSED, RK3399_CLKGATE_CON(5), 1, GFLAGS), + GATE(0, "gpll_aclk_perihp_src", "gpll", CLK_IGNORE_UNUSED, + RK3399_CLKGATE_CON(5), 0, GFLAGS), COMPOSITE(ACLK_PERIHP, "aclk_perihp", mux_aclk_perihp_p, CLK_IGNORE_UNUSED, RK3399_CLKSEL_CON(14), 7, 1, MFLAGS, 0, 5, DFLAGS, RK3399_CLKGATE_CON(5), 2, GFLAGS), -- cgit v1.2.3 From e1717e0485af4f47fc4da1e979ac817f9ad61b0f Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 20 Jul 2016 12:00:06 +0300 Subject: perf intel-pt: Fix ip compression The June 2015 Intel SDM introduced IP Compression types 4 and 6. Refer to section 36.4.2.2 Target IP (TIP) Packet - IP Compression. Existing Intel PT packet decoder did not support type 4, and got type 6 wrong. Because type 3 and type 4 have the same number of bytes, the packet 'count' has been changed from being the number of ip bytes to being the type code. That allows the Intel PT decoder to correctly decide whether to sign-extend or use the last ip. However that also meant the code had to be adjusted in a number of places. Currently hardware is not using the new compression types, so this fix has no effect on existing hardware. Signed-off-by: Adrian Hunter Cc: Jiri Olsa Link: http://lkml.kernel.org/r/1469005206-3049-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo --- .../perf/util/intel-pt-decoder/intel-pt-decoder.c | 44 +++++++++++----------- .../util/intel-pt-decoder/intel-pt-pkt-decoder.c | 24 ++++++++---- 2 files changed, 40 insertions(+), 28 deletions(-) diff --git a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c index 9c8f15da86ce..8ff6c6a61291 100644 --- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c +++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c @@ -123,8 +123,6 @@ struct intel_pt_decoder { bool have_calc_cyc_to_tsc; int exec_mode; unsigned int insn_bytes; - uint64_t sign_bit; - uint64_t sign_bits; uint64_t period; enum intel_pt_period_type period_type; uint64_t tot_insn_cnt; @@ -191,9 +189,6 @@ struct intel_pt_decoder *intel_pt_decoder_new(struct intel_pt_params *params) decoder->data = params->data; decoder->return_compression = params->return_compression; - decoder->sign_bit = (uint64_t)1 << 47; - decoder->sign_bits = ~(((uint64_t)1 << 48) - 1); - decoder->period = params->period; decoder->period_type = params->period_type; @@ -362,21 +357,30 @@ int intel_pt__strerror(int code, char *buf, size_t buflen) return 0; } -static uint64_t intel_pt_calc_ip(struct intel_pt_decoder *decoder, - const struct intel_pt_pkt *packet, +static uint64_t intel_pt_calc_ip(const struct intel_pt_pkt *packet, uint64_t last_ip) { uint64_t ip; switch (packet->count) { - case 2: + case 1: ip = (last_ip & (uint64_t)0xffffffffffff0000ULL) | packet->payload; break; - case 4: + case 2: ip = (last_ip & (uint64_t)0xffffffff00000000ULL) | packet->payload; break; + case 3: + ip = packet->payload; + /* Sign-extend 6-byte ip */ + if (ip & (uint64_t)0x800000000000ULL) + ip |= (uint64_t)0xffff000000000000ULL; + break; + case 4: + ip = (last_ip & (uint64_t)0xffff000000000000ULL) | + packet->payload; + break; case 6: ip = packet->payload; break; @@ -384,16 +388,12 @@ static uint64_t intel_pt_calc_ip(struct intel_pt_decoder *decoder, return 0; } - if (ip & decoder->sign_bit) - return ip | decoder->sign_bits; - return ip; } static inline void intel_pt_set_last_ip(struct intel_pt_decoder *decoder) { - decoder->last_ip = intel_pt_calc_ip(decoder, &decoder->packet, - decoder->last_ip); + decoder->last_ip = intel_pt_calc_ip(&decoder->packet, decoder->last_ip); } static inline void intel_pt_set_ip(struct intel_pt_decoder *decoder) @@ -1657,6 +1657,12 @@ next: } } +static inline bool intel_pt_have_ip(struct intel_pt_decoder *decoder) +{ + return decoder->last_ip || decoder->packet.count == 0 || + decoder->packet.count == 3 || decoder->packet.count == 6; +} + /* Walk PSB+ packets to get in sync. */ static int intel_pt_walk_psb(struct intel_pt_decoder *decoder) { @@ -1677,8 +1683,7 @@ static int intel_pt_walk_psb(struct intel_pt_decoder *decoder) case INTEL_PT_FUP: decoder->pge = true; - if (decoder->last_ip || decoder->packet.count == 6 || - decoder->packet.count == 0) { + if (intel_pt_have_ip(decoder)) { uint64_t current_ip = decoder->ip; intel_pt_set_ip(decoder); @@ -1767,8 +1772,7 @@ static int intel_pt_walk_to_ip(struct intel_pt_decoder *decoder) case INTEL_PT_TIP_PGE: case INTEL_PT_TIP: decoder->pge = decoder->packet.type != INTEL_PT_TIP_PGD; - if (decoder->last_ip || decoder->packet.count == 6 || - decoder->packet.count == 0) + if (intel_pt_have_ip(decoder)) intel_pt_set_ip(decoder); if (decoder->ip) return 0; @@ -1776,9 +1780,7 @@ static int intel_pt_walk_to_ip(struct intel_pt_decoder *decoder) case INTEL_PT_FUP: if (decoder->overflow) { - if (decoder->last_ip || - decoder->packet.count == 6 || - decoder->packet.count == 0) + if (intel_pt_have_ip(decoder)) intel_pt_set_ip(decoder); if (decoder->ip) return 0; diff --git a/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c b/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c index b1257c816310..4f7b32020487 100644 --- a/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c +++ b/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c @@ -292,36 +292,46 @@ static int intel_pt_get_ip(enum intel_pt_pkt_type type, unsigned int byte, const unsigned char *buf, size_t len, struct intel_pt_pkt *packet) { - switch (byte >> 5) { + int ip_len; + + packet->count = byte >> 5; + + switch (packet->count) { case 0: - packet->count = 0; + ip_len = 0; break; case 1: if (len < 3) return INTEL_PT_NEED_MORE_BYTES; - packet->count = 2; + ip_len = 2; packet->payload = le16_to_cpu(*(uint16_t *)(buf + 1)); break; case 2: if (len < 5) return INTEL_PT_NEED_MORE_BYTES; - packet->count = 4; + ip_len = 4; packet->payload = le32_to_cpu(*(uint32_t *)(buf + 1)); break; case 3: - case 6: + case 4: if (len < 7) return INTEL_PT_NEED_MORE_BYTES; - packet->count = 6; + ip_len = 6; memcpy_le64(&packet->payload, buf + 1, 6); break; + case 6: + if (len < 9) + return INTEL_PT_NEED_MORE_BYTES; + ip_len = 8; + packet->payload = le64_to_cpu(*(uint64_t *)(buf + 1)); + break; default: return INTEL_PT_BAD_PACKET; } packet->type = type; - return packet->count + 1; + return ip_len + 1; } static int intel_pt_get_mode(const unsigned char *buf, size_t len, -- cgit v1.2.3 From 33da54fa86e29b87fe1e83bd0f15b4ef2be53ecb Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Thu, 11 Aug 2016 10:50:57 +0200 Subject: perf tools mem: Fix -t store option for record command Michael reported 'perf mem -t store record' being broken. The reason is latest rework of this area: commit acbe613e0c03 ("perf tools: Add monitored events array") We don't mark perf_mem_events store record when -t store option is specified. Committer notes: Before: # perf mem -t store record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ] # perf evlist cycles:ppp # After: # perf mem -t store record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ] # perf evlist cpu/mem-stores/P # Reported-by: Michael Petlan Signed-off-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Fixes: acbe613e0c03 ("perf tools: Add monitored events array") Link: http://lkml.kernel.org/r/1470905457-18311-1-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-mem.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/perf/builtin-mem.c b/tools/perf/builtin-mem.c index d608a2c9e48c..d1ce29be560e 100644 --- a/tools/perf/builtin-mem.c +++ b/tools/perf/builtin-mem.c @@ -88,6 +88,9 @@ static int __cmd_record(int argc, const char **argv, struct perf_mem *mem) if (mem->operation & MEM_OPERATION_LOAD) perf_mem_events[PERF_MEM_EVENTS__LOAD].record = true; + if (mem->operation & MEM_OPERATION_STORE) + perf_mem_events[PERF_MEM_EVENTS__STORE].record = true; + if (perf_mem_events[PERF_MEM_EVENTS__LOAD].record) rec_argv[i++] = "-W"; -- cgit v1.2.3 From f046f3df665361d2f89e660f8c79ba164069f02a Mon Sep 17 00:00:00 2001 From: Ravi Bangoria Date: Thu, 11 Aug 2016 14:43:59 -0300 Subject: perf ppc64le: Fix build failure when libelf is not present arch__post_process_probe_trace_events() calls get_target_map() to prepare symbol table. get_target_map() is defined inside util/probe-event.c. probe-event.c will only get included in perf binary if CONFIG_LIBELF is set. Hence arch__post_process_probe_trace_events() needs to be defined inside #ifdef HAVE_LIBELF_SUPPORT to solve compilation error. Reported-and-Tested-by: Anton Blanchard Tested-by: Arnaldo Carvalho de Melo Cc: Peter Zijlstra Cc: Alexander Shishkin Cc: Balbir Singh Cc: Naveen N. Rao Cc: Ananth N Mavinakayanahalli Cc: Masami Hiramatsu Cc: Wang Nan Cc: Namhyung Kim Link: http://lkml.kernel.org/r/57ABFF88.8030905@linux.vnet.ibm.com [ Thunderbird MUA mangled it, fix that ] Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/arch/powerpc/util/sym-handling.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/arch/powerpc/util/sym-handling.c b/tools/perf/arch/powerpc/util/sym-handling.c index 8d4dc97d80ba..35745a733100 100644 --- a/tools/perf/arch/powerpc/util/sym-handling.c +++ b/tools/perf/arch/powerpc/util/sym-handling.c @@ -97,6 +97,7 @@ void arch__fix_tev_from_maps(struct perf_probe_event *pev, } } +#ifdef HAVE_LIBELF_SUPPORT void arch__post_process_probe_trace_events(struct perf_probe_event *pev, int ntevs) { @@ -118,5 +119,6 @@ void arch__post_process_probe_trace_events(struct perf_probe_event *pev, } } } +#endif /* HAVE_LIBELF_SUPPORT */ #endif -- cgit v1.2.3 From fc520f8b4fa35ceb36f0ad031c1a297968788236 Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Fri, 12 Aug 2016 13:49:34 +0800 Subject: of/platform: disable the of_platform_default_populate_init() for all the ppc boards With the commit 44a7185c2ae6 ("of/platform: Add common method to populate default bus"), a default function is introduced to populate the default bus and this function is invoked at the arch_initcall_sync level. But a lot of ppc boards use machine_device_initcall() to populate the default bus. This means that the default populate function has higher priority and would override the arch specific population of the bus. The side effect is that some arch specific bus are not probed, then cause various malfunction due to the miss of some devices. Since it is very possible to introduce bugs if we simply change the initcall level for all these boards(about 30+). This just disable this default function for all the ppc boards. Signed-off-by: Kevin Hao Signed-off-by: Rob Herring --- drivers/of/platform.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/of/platform.c b/drivers/of/platform.c index 8aa197691074..f39ccd5aa701 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -497,6 +497,7 @@ int of_platform_default_populate(struct device_node *root, } EXPORT_SYMBOL_GPL(of_platform_default_populate); +#ifndef CONFIG_PPC static int __init of_platform_default_populate_init(void) { struct device_node *node; @@ -521,6 +522,7 @@ static int __init of_platform_default_populate_init(void) return 0; } arch_initcall_sync(of_platform_default_populate_init); +#endif static int of_platform_device_destroy(struct device *dev, void *data) { -- cgit v1.2.3 From a7a0729c4532c94f4e8efb4faaf6ef00e5fe19ba Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Fri, 12 Aug 2016 14:11:12 -0600 Subject: docs: Set the Sphinx default highlight language to "guess" This should eliminate a whole class of markup warnings, at the cost of occasionally amusing markup choices; we'll have to see if it works out. Suggested-by: Markus Heiser Signed-off-by: Jonathan Corbet --- Documentation/conf.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/conf.py b/Documentation/conf.py index 96b7aa66c89c..106ae9c740b9 100644 --- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -131,7 +131,7 @@ pygments_style = 'sphinx' todo_include_todos = False primary_domain = 'C' -highlight_language = 'C' +highlight_language = 'guess' # -- Options for HTML output ---------------------------------------------- -- cgit v1.2.3 From ce7c6c9e1d997a2670aead3a7b87f4df32c11118 Mon Sep 17 00:00:00 2001 From: Greg Edwards Date: Sat, 30 Jul 2016 10:06:26 -0600 Subject: mpt3sas: Fix resume on WarpDrive flash cards mpt3sas crashes on resume after suspend with WarpDrive flash cards. The reply_post_host_index array is not set back up after the resume, and we deference a stale pointer in _base_interrupt(). [ 47.309711] BUG: unable to handle kernel paging request at ffffc90001f8006c [ 47.318289] IP: [] _base_interrupt+0x49f/0xa30 [mpt3sas] [ 47.326749] PGD 41ccaa067 PUD 41ccab067 PMD 3466c067 PTE 0 [ 47.333848] Oops: 0002 [#1] SMP ... [ 47.452708] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.7.0 #6 [ 47.460506] Hardware name: Dell Inc. OptiPlex 990/06D7TR, BIOS A18 09/24/2013 [ 47.469629] task: ffffffff81c0d500 ti: ffffffff81c00000 task.ti: ffffffff81c00000 [ 47.479112] RIP: 0010:[] [] _base_interrupt+0x49f/0xa30 [mpt3sas] [ 47.490466] RSP: 0018:ffff88041d203e30 EFLAGS: 00010002 [ 47.497801] RAX: 0000000000000001 RBX: ffff880033f4c000 RCX: 0000000000000001 [ 47.506973] RDX: ffffc90001f8006c RSI: 0000000000000082 RDI: 0000000000000082 [ 47.516141] RBP: ffff88041d203eb0 R08: ffff8804118e2820 R09: 0000000000000001 [ 47.525300] R10: 0000000000000001 R11: 00000000100c0000 R12: 0000000000000000 [ 47.534457] R13: ffff880412c487e0 R14: ffff88041a8987d8 R15: 0000000000000001 [ 47.543632] FS: 0000000000000000(0000) GS:ffff88041d200000(0000) knlGS:0000000000000000 [ 47.553796] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.561632] CR2: ffffc90001f8006c CR3: 0000000001c06000 CR4: 00000000000406f0 [ 47.570883] Stack: [ 47.575015] 000000001d211228 ffff88041d2100c0 ffff8800c47d8130 0000000000000100 [ 47.584625] ffff8804100c0000 100c000000000000 ffff88041a8992a0 ffff88041a8987f8 [ 47.594230] ffff88041d203e00 ffffffff81111e55 000000000000038c ffff880414ad4280 [ 47.603862] Call Trace: [ 47.608474] [ 47.610413] [] ? call_timer_fn+0x35/0x120 [ 47.620539] [] handle_irq_event_percpu+0x7f/0x1c0 [ 47.629061] [] handle_irq_event+0x2c/0x50 [ 47.636859] [] handle_edge_irq+0x6f/0x130 [ 47.644654] [] handle_irq+0x73/0x120 [ 47.652011] [] ? atomic_notifier_call_chain+0x1a/0x20 [ 47.660854] [] do_IRQ+0x4b/0xd0 [ 47.667777] [] common_interrupt+0x8c/0x8c [ 47.675635] Move the reply_post_host_index array setup into mpt3sas_base_map_resources(), which is also in the resume path. Cc: stable@vger.kernel.org Signed-off-by: Greg Edwards Acked-by: Chaitra P B Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_base.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 751f13edece0..750f82c339d4 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2188,6 +2188,17 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) } else ioc->msix96_vector = 0; + if (ioc->is_warpdrive) { + ioc->reply_post_host_index[0] = (resource_size_t __iomem *) + &ioc->chip->ReplyPostHostIndex; + + for (i = 1; i < ioc->cpu_msix_table_sz; i++) + ioc->reply_post_host_index[i] = + (resource_size_t __iomem *) + ((u8 __iomem *)&ioc->chip->Doorbell + (0x4000 + ((i - 1) + * 4))); + } + list_for_each_entry(reply_q, &ioc->reply_queue_list, list) pr_info(MPT3SAS_FMT "%s: IRQ %d\n", reply_q->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" : @@ -5280,17 +5291,6 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) if (r) goto out_free_resources; - if (ioc->is_warpdrive) { - ioc->reply_post_host_index[0] = (resource_size_t __iomem *) - &ioc->chip->ReplyPostHostIndex; - - for (i = 1; i < ioc->cpu_msix_table_sz; i++) - ioc->reply_post_host_index[i] = - (resource_size_t __iomem *) - ((u8 __iomem *)&ioc->chip->Doorbell + (0x4000 + ((i - 1) - * 4))); - } - pci_set_drvdata(ioc->pdev, ioc->shost); r = _base_get_ioc_facts(ioc, CAN_SLEEP); if (r) -- cgit v1.2.3 From 5381cfb6f0422da24cfa9da35b0433c0415830e0 Mon Sep 17 00:00:00 2001 From: Sven Van Asbroeck Date: Fri, 12 Aug 2016 09:10:27 -0400 Subject: power: supply: max17042_battery: fix model download bug. The device's model download function returns the model data as an array of u32s, which is later compared to the reference model data. However, since the latter is an array of u16s, the comparison does not happen correctly, and model verification fails. This in turn breaks the POR initialization sequence. Fixes: 39e7213edc4f3 ("max17042_battery: Support regmap to access device's registers") Reported-by: Dan Carpenter Signed-off-by: Sven Van Asbroeck Reviewed-by: Krzysztof Kozlowski Signed-off-by: Sebastian Reichel --- drivers/power/max17042_battery.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/power/max17042_battery.c b/drivers/power/max17042_battery.c index 9c65f134d447..da7a75f82489 100644 --- a/drivers/power/max17042_battery.c +++ b/drivers/power/max17042_battery.c @@ -457,13 +457,16 @@ static inline void max17042_write_model_data(struct max17042_chip *chip, } static inline void max17042_read_model_data(struct max17042_chip *chip, - u8 addr, u32 *data, int size) + u8 addr, u16 *data, int size) { struct regmap *map = chip->regmap; int i; + u32 tmp; - for (i = 0; i < size; i++) - regmap_read(map, addr + i, &data[i]); + for (i = 0; i < size; i++) { + regmap_read(map, addr + i, &tmp); + data[i] = (u16)tmp; + } } static inline int max17042_model_data_compare(struct max17042_chip *chip, @@ -486,7 +489,7 @@ static int max17042_init_model(struct max17042_chip *chip) { int ret; int table_size = ARRAY_SIZE(chip->pdata->config_data->cell_char_tbl); - u32 *temp_data; + u16 *temp_data; temp_data = kcalloc(table_size, sizeof(*temp_data), GFP_KERNEL); if (!temp_data) @@ -501,7 +504,7 @@ static int max17042_init_model(struct max17042_chip *chip) ret = max17042_model_data_compare( chip, chip->pdata->config_data->cell_char_tbl, - (u16 *)temp_data, + temp_data, table_size); max10742_lock_model(chip); @@ -514,7 +517,7 @@ static int max17042_verify_model_lock(struct max17042_chip *chip) { int i; int table_size = ARRAY_SIZE(chip->pdata->config_data->cell_char_tbl); - u32 *temp_data; + u16 *temp_data; int ret = 0; temp_data = kcalloc(table_size, sizeof(*temp_data), GFP_KERNEL); -- cgit v1.2.3 From 7a4947cf6f26b7d0a5db260d212f6df41a563d23 Mon Sep 17 00:00:00 2001 From: Andy Yan Date: Fri, 12 Aug 2016 18:01:50 +0800 Subject: power: reset: reboot-mode: fix build error of missing ioremap/iounmap on UM commit 4fcd504edbf7 ("power: reset: add reboot mode driver") uses api from syscon, and syscon uses ioremap/iounmap which depends on HAS_IOMEM, so let's depend on MFD_SYSCON instead of selecting it directly to avoid the um-allyesconfig like build error on archs that without iomem: drivers/mfd/syscon.c: In function 'of_syscon_register': drivers/mfd/syscon.c:67:9: error: implicit declaration of function 'ioremap' [-Werror=implicit-function-declaration] base = ioremap(res.start, resource_size(&res)); ^ drivers/mfd/syscon.c:67:7: warning: assignment makes pointer from integer without a cast [-Wint-conversion] base = ioremap(res.start, resource_size(&res)); ^ drivers/mfd/syscon.c:109:2: error: implicit declaration of function 'iounmap' [-Werror=implicit-function-declaration] iounmap(base); ^ Reported-by: Kbuild test robot Fixes: 4fcd504edbf7("power: reset: add reboot mode driver") Signed-off-by: Andy Yan Reviewed-by: Krzysztof Kozlowski Signed-off-by: Sebastian Reichel --- drivers/power/reset/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 3bfac539334b..c74c3f67b8da 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -200,8 +200,8 @@ config REBOOT_MODE config SYSCON_REBOOT_MODE tristate "Generic SYSCON regmap reboot mode driver" depends on OF + depends on MFD_SYSCON select REBOOT_MODE - select MFD_SYSCON help Say y here will enable reboot mode driver. This will get reboot mode arguments and store it in SYSCON mapped -- cgit v1.2.3 From bae170efd6c42bf116f513a1dd07639d68fa71b9 Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Fri, 12 Aug 2016 20:49:18 +0530 Subject: power: reset: hisi-reboot: Unmap region obtained by of_iomap Free memory mapping, if probe is not successful. Fixes: 4a9b37371822 ("power: reset: move hisilicon reboot code") Signed-off-by: Arvind Yadav Signed-off-by: Sebastian Reichel --- drivers/power/reset/hisi-reboot.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/power/reset/hisi-reboot.c b/drivers/power/reset/hisi-reboot.c index 9ab7f562a83b..f69387e12c1e 100644 --- a/drivers/power/reset/hisi-reboot.c +++ b/drivers/power/reset/hisi-reboot.c @@ -53,13 +53,16 @@ static int hisi_reboot_probe(struct platform_device *pdev) if (of_property_read_u32(np, "reboot-offset", &reboot_offset) < 0) { pr_err("failed to find reboot-offset property\n"); + iounmap(base); return -EINVAL; } err = register_restart_handler(&hisi_restart_nb); - if (err) + if (err) { dev_err(&pdev->dev, "cannot register restart handler (err=%d)\n", err); + iounmap(base); + } return err; } -- cgit v1.2.3 From c2d5be14cb39da34b076b461d8aa2344611364c6 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Fri, 12 Aug 2016 15:12:36 -0600 Subject: docs: kernel-documentation: remove some highlight directives With the conf.py change, we don't need them to avoid warnings anymore. Signed-off-by: Jonathan Corbet --- Documentation/kernel-documentation.rst | 6 ------ 1 file changed, 6 deletions(-) diff --git a/Documentation/kernel-documentation.rst b/Documentation/kernel-documentation.rst index c4eb5049da39..391decc66a18 100644 --- a/Documentation/kernel-documentation.rst +++ b/Documentation/kernel-documentation.rst @@ -366,8 +366,6 @@ Domain`_ references. Cross-referencing from reStructuredText ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -.. highlight:: none - To cross-reference the functions and types defined in the kernel-doc comments from reStructuredText documents, please use the `Sphinx C Domain`_ references. For example:: @@ -390,8 +388,6 @@ For further details, please refer to the `Sphinx C Domain`_ documentation. Function documentation ---------------------- -.. highlight:: c - The general format of a function and function-like macro kernel-doc comment is:: /** @@ -572,8 +568,6 @@ DocBook XML [DEPRECATED] Converting DocBook to Sphinx ---------------------------- -.. highlight:: none - Over time, we expect all of the documents under ``Documentation/DocBook`` to be converted to Sphinx and reStructuredText. For most DocBook XML documents, a good enough solution is to use the simple ``Documentation/sphinx/tmplcvt`` script, -- cgit v1.2.3 From e120dcb6b2a11840b08f0fc0d2e90256b7b6e842 Mon Sep 17 00:00:00 2001 From: Calvin Owens Date: Fri, 13 May 2016 13:28:21 -0700 Subject: ses: Fix racy cleanup of /sys in remove_dev() Currently we free the resources backing the enclosure device before we call device_unregister(). This is racy: during rmmod of low-level SCSI drivers that hook into enclosure, we end up with a small window of time during which writing to /sys can OOPS. Example trace with mpt3sas: general protection fault: 0000 [#1] SMP KASAN Modules linked in: mpt3sas(-) <...> RIP: [] ses_get_page2_descriptor.isra.6+0x38/0x220 [ses] Call Trace: [] ses_set_fault+0xf4/0x400 [ses] [] set_component_fault+0xa9/0xf0 [enclosure] [] dev_attr_store+0x3c/0x70 [] sysfs_kf_write+0x115/0x180 [] kernfs_fop_write+0x275/0x3a0 [] __vfs_write+0xe0/0x3e0 [] vfs_write+0x13f/0x4a0 [] SyS_write+0x111/0x230 [] entry_SYSCALL_64_fastpath+0x13/0x94 Fortunately the solution is extremely simple: call device_unregister() before we free the resources, and the race no longer exists. The driver core holds a reference over ->remove_dev(), so AFAICT this is safe. Signed-off-by: Calvin Owens Reviewed-by: James Bottomley Signed-off-by: Martin K. Petersen --- drivers/scsi/ses.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index 53ef1cb6418e..0e8601aa877a 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -778,6 +778,8 @@ static void ses_intf_remove_enclosure(struct scsi_device *sdev) if (!edev) return; + enclosure_unregister(edev); + ses_dev = edev->scratch; edev->scratch = NULL; @@ -789,7 +791,6 @@ static void ses_intf_remove_enclosure(struct scsi_device *sdev) kfree(edev->component[0].scratch); put_device(&edev->edev); - enclosure_unregister(edev); } static void ses_intf_remove(struct device *cdev, -- cgit v1.2.3 From 601bbae0bc10d4306857b93d84240b039b3d9a6c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 10 Aug 2016 23:54:08 +0200 Subject: dsa: mv88e6xxx: hide unused functions When CONFIG_NET_DSA_HWMON is disabled, we get warnings about two unused functions whose only callers are all inside of an #ifdef: drivers/net/dsa/mv88e6xxx.c:3257:12: 'mv88e6xxx_mdio_page_write' defined but not used [-Werror=unused-function] drivers/net/dsa/mv88e6xxx.c:3244:12: 'mv88e6xxx_mdio_page_read' defined but not used [-Werror=unused-function] This adds another ifdef around the function definitions. The warnings appeared after the functions were marked 'static', but the problem was already there before that. Signed-off-by: Arnd Bergmann Fixes: 57d3231057e9 ("net: dsa: mv88e6xxx: fix style issues") Reviewed-by: Vivien Didelot Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index d36aedde8cb9..d1d9d3cf9139 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -3187,6 +3187,7 @@ static int mv88e6xxx_set_addr(struct dsa_switch *ds, u8 *addr) return err; } +#ifdef CONFIG_NET_DSA_HWMON static int mv88e6xxx_mdio_page_read(struct dsa_switch *ds, int port, int page, int reg) { @@ -3212,6 +3213,7 @@ static int mv88e6xxx_mdio_page_write(struct dsa_switch *ds, int port, int page, return ret; } +#endif static int mv88e6xxx_port_to_mdio_addr(struct mv88e6xxx_chip *chip, int port) { -- cgit v1.2.3 From 947d2c2cd3340d11a1737d3f4781170cc3a4b74f Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 13 Aug 2016 02:54:04 +0200 Subject: PM / sleep: Update some system sleep documentation Update some documentation related to system sleep to document new features and remove outdated information from it. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Reviewed-by: Chen Yu --- Documentation/power/basic-pm-debugging.txt | 27 +++++- Documentation/power/interface.txt | 151 +++++++++++++++-------------- 2 files changed, 102 insertions(+), 76 deletions(-) diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt index b96098ccfe69..708f87f78a75 100644 --- a/Documentation/power/basic-pm-debugging.txt +++ b/Documentation/power/basic-pm-debugging.txt @@ -164,7 +164,32 @@ load n/2 modules more and try again. Again, if you find the offending module(s), it(they) must be unloaded every time before hibernation, and please report the problem with it(them). -c) Advanced debugging +c) Using the "test_resume" hibernation option + +/sys/power/disk generally tells the kernel what to do after creating a +hibernation image. One of the available options is "test_resume" which +causes the just created image to be used for immediate restoration. Namely, +after doing: + +# echo test_resume > /sys/power/disk +# echo disk > /sys/power/state + +a hibernation image will be created and a resume from it will be triggered +immediately without involving the platform firmware in any way. + +That test can be used to check if failures to resume from hibernation are +related to bad interactions with the platform firmware. That is, if the above +works every time, but resume from actual hibernation does not work or is +unreliable, the platform firmware may be responsible for the failures. + +On architectures and platforms that support using different kernels to restore +hibernation images (that is, the kernel used to read the image from storage and +load it into memory is different from the one included in the image) or support +kernel address space randomization, it also can be used to check if failures +to resume may be related to the differences between the restore and image +kernels. + +d) Advanced debugging In case that hibernation does not work on your system even in the minimal configuration and compiling more drivers as modules is not practical or some diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.txt index f1f0f59a7c47..974916ff6608 100644 --- a/Documentation/power/interface.txt +++ b/Documentation/power/interface.txt @@ -1,75 +1,76 @@ -Power Management Interface - - -The power management subsystem provides a unified sysfs interface to -userspace, regardless of what architecture or platform one is -running. The interface exists in /sys/power/ directory (assuming sysfs -is mounted at /sys). - -/sys/power/state controls system power state. Reading from this file -returns what states are supported, which is hard-coded to 'freeze', -'standby' (Power-On Suspend), 'mem' (Suspend-to-RAM), and 'disk' -(Suspend-to-Disk). - -Writing to this file one of those strings causes the system to -transition into that state. Please see the file -Documentation/power/states.txt for a description of each of those -states. - - -/sys/power/disk controls the operating mode of the suspend-to-disk -mechanism. Suspend-to-disk can be handled in several ways. We have a -few options for putting the system to sleep - using the platform driver -(e.g. ACPI or other suspend_ops), powering off the system or rebooting the -system (for testing). - -Additionally, /sys/power/disk can be used to turn on one of the two testing -modes of the suspend-to-disk mechanism: 'testproc' or 'test'. If the -suspend-to-disk mechanism is in the 'testproc' mode, writing 'disk' to -/sys/power/state will cause the kernel to disable nonboot CPUs and freeze -tasks, wait for 5 seconds, unfreeze tasks and enable nonboot CPUs. If it is -in the 'test' mode, writing 'disk' to /sys/power/state will cause the kernel -to disable nonboot CPUs and freeze tasks, shrink memory, suspend devices, wait -for 5 seconds, resume devices, unfreeze tasks and enable nonboot CPUs. Then, -we are able to look in the log messages and work out, for example, which code -is being slow and which device drivers are misbehaving. - -Reading from this file will display all supported modes and the currently -selected one in brackets, for example - - [shutdown] reboot test testproc - -Writing to this file will accept one of - - 'platform' (only if the platform supports it) - 'shutdown' - 'reboot' - 'testproc' - 'test' - -/sys/power/image_size controls the size of the image created by -the suspend-to-disk mechanism. It can be written a string -representing a non-negative integer that will be used as an upper -limit of the image size, in bytes. The suspend-to-disk mechanism will -do its best to ensure the image size will not exceed that number. However, -if this turns out to be impossible, it will try to suspend anyway using the -smallest image possible. In particular, if "0" is written to this file, the -suspend image will be as small as possible. - -Reading from this file will display the current image size limit, which -is set to 2/5 of available RAM by default. - -/sys/power/pm_trace controls the code which saves the last PM event point in -the RTC across reboots, so that you can debug a machine that just hangs -during suspend (or more commonly, during resume). Namely, the RTC is only -used to save the last PM event point if this file contains '1'. Initially it -contains '0' which may be changed to '1' by writing a string representing a -nonzero integer into it. - -To use this debugging feature you should attempt to suspend the machine, then -reboot it and run - - dmesg -s 1000000 | grep 'hash matches' - -CAUTION: Using it will cause your machine's real-time (CMOS) clock to be -set to a random invalid time after a resume. +Power Management Interface for System Sleep + +Copyright (c) 2016 Intel Corp., Rafael J. Wysocki + +The power management subsystem provides userspace with a unified sysfs interface +for system sleep regardless of the underlying system architecture or platform. +The interface is located in the /sys/power/ directory (assuming that sysfs is +mounted at /sys). + +/sys/power/state is the system sleep state control file. + +Reading from it returns a list of supported sleep states, encoded as: + +'freeze' (Suspend-to-Idle) +'standby' (Power-On Suspend) +'mem' (Suspend-to-RAM) +'disk' (Suspend-to-Disk) + +Suspend-to-Idle is always supported. Suspend-to-Disk is always supported +too as long the kernel has been configured to support hibernation at all +(ie. CONFIG_HIBERNATION is set in the kernel configuration file). Support +for Suspend-to-RAM and Power-On Suspend depends on the capabilities of the +platform. + +If one of the strings listed in /sys/power/state is written to it, the system +will attempt to transition into the corresponding sleep state. Refer to +Documentation/power/states.txt for a description of each of those states. + +/sys/power/disk controls the operating mode of hibernation (Suspend-to-Disk). +Specifically, it tells the kernel what to do after creating a hibernation image. + +Reading from it returns a list of supported options encoded as: + +'platform' (put the system into sleep using a platform-provided method) +'shutdown' (shut the system down) +'reboot' (reboot the system) +'suspend' (trigger a Suspend-to-RAM transition) +'test_resume' (resume-after-hibernation test mode) + +The currently selected option is printed in square brackets. + +The 'platform' option is only available if the platform provides a special +mechanism to put the system to sleep after creating a hibernation image (ACPI +does that, for example). The 'suspend' option is available if Suspend-to-RAM +is supported. Refer to Documentation/power/basic_pm_debugging.txt for the +description of the 'test_resume' option. + +To select an option, write the string representing it to /sys/power/disk. + +/sys/power/image_size controls the size of hibernation images. + +It can be written a string representing a non-negative integer that will be +used as a best-effort upper limit of the image size, in bytes. The hibernation +core will do its best to ensure that the image size will not exceed that number. +However, if that turns out to be impossible to achieve, a hibernation image will +still be created and its size will be as small as possible. In particular, +writing '0' to this file will enforce hibernation images to be as small as +possible. + +Reading from this file returns the current image size limit, which is set to +around 2/5 of available RAM by default. + +/sys/power/pm_trace controls the PM trace mechanism saving the last suspend +or resume event point in the RTC across reboots. + +It helps to debug hard lockups or reboots due to device driver failures that +occur during system suspend or resume (which is more common) more effectively. + +If /sys/power/pm_trace contains '1', the fingerprint of each suspend/resume +event point in turn will be stored in the RTC memory (overwriting the actual +RTC information), so it will survive a system crash if one occurs right after +storing it and it can be used later to identify the driver that caused the crash +to happen (see Documentation/power/s2ram.txt for more information). + +Initially it contains '0' which may be changed to '1' by writing a string +representing a nonzero integer into it. -- cgit v1.2.3 From 747ea55e4f78fd980350c39570a986b8c1c3e4aa Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 12 Aug 2016 22:17:17 +0200 Subject: bpf: fix bpf_skb_in_cgroup helper naming While hashing out BPF's current_task_under_cgroup helper bits, it came to discussion that the skb_in_cgroup helper name was suboptimally chosen. Tejun says: So, I think in_cgroup should mean that the object is in that particular cgroup while under_cgroup in the subhierarchy of that cgroup. Let's rename the other subhierarchy test to under too. I think that'd be a lot less confusing going forward. [...] It's more intuitive and gives us the room to implement the real "in" test if ever necessary in the future. Since this touches uapi bits, we need to change this as long as v4.8 is not yet officially released. Thus, change the helper enum and rename related bits. Fixes: 4a482f34afcc ("cgroup: bpf: Add bpf_skb_in_cgroup_proto") Reference: http://patchwork.ozlabs.org/patch/658500/ Suggested-by: Sargun Dhillon Suggested-by: Tejun Heo Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov --- include/uapi/linux/bpf.h | 4 ++-- kernel/bpf/verifier.c | 4 ++-- net/core/filter.c | 10 +++++----- samples/bpf/bpf_helpers.h | 4 ++-- samples/bpf/test_cgrp2_tc_kern.c | 2 +- 5 files changed, 12 insertions(+), 12 deletions(-) diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index da218fec6056..9e5fc168c8a3 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -339,7 +339,7 @@ enum bpf_func_id { BPF_FUNC_skb_change_type, /** - * bpf_skb_in_cgroup(skb, map, index) - Check cgroup2 membership of skb + * bpf_skb_under_cgroup(skb, map, index) - Check cgroup2 membership of skb * @skb: pointer to skb * @map: pointer to bpf_map in BPF_MAP_TYPE_CGROUP_ARRAY type * @index: index of the cgroup in the bpf_map @@ -348,7 +348,7 @@ enum bpf_func_id { * == 1 skb succeeded the cgroup2 descendant test * < 0 error */ - BPF_FUNC_skb_in_cgroup, + BPF_FUNC_skb_under_cgroup, /** * bpf_get_hash_recalc(skb) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 7094c69ac199..daea765d72e6 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -1053,7 +1053,7 @@ static int check_map_func_compatibility(struct bpf_map *map, int func_id) goto error; break; case BPF_MAP_TYPE_CGROUP_ARRAY: - if (func_id != BPF_FUNC_skb_in_cgroup) + if (func_id != BPF_FUNC_skb_under_cgroup) goto error; break; default: @@ -1075,7 +1075,7 @@ static int check_map_func_compatibility(struct bpf_map *map, int func_id) if (map->map_type != BPF_MAP_TYPE_STACK_TRACE) goto error; break; - case BPF_FUNC_skb_in_cgroup: + case BPF_FUNC_skb_under_cgroup: if (map->map_type != BPF_MAP_TYPE_CGROUP_ARRAY) goto error; break; diff --git a/net/core/filter.c b/net/core/filter.c index b5add4ef0d1d..bd9bf2e5fafa 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -2317,7 +2317,7 @@ bpf_get_skb_set_tunnel_proto(enum bpf_func_id which) } #ifdef CONFIG_SOCK_CGROUP_DATA -static u64 bpf_skb_in_cgroup(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5) +static u64 bpf_skb_under_cgroup(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5) { struct sk_buff *skb = (struct sk_buff *)(long)r1; struct bpf_map *map = (struct bpf_map *)(long)r2; @@ -2340,8 +2340,8 @@ static u64 bpf_skb_in_cgroup(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5) return cgroup_is_descendant(sock_cgroup_ptr(&sk->sk_cgrp_data), cgrp); } -static const struct bpf_func_proto bpf_skb_in_cgroup_proto = { - .func = bpf_skb_in_cgroup, +static const struct bpf_func_proto bpf_skb_under_cgroup_proto = { + .func = bpf_skb_under_cgroup, .gpl_only = false, .ret_type = RET_INTEGER, .arg1_type = ARG_PTR_TO_CTX, @@ -2421,8 +2421,8 @@ tc_cls_act_func_proto(enum bpf_func_id func_id) case BPF_FUNC_get_smp_processor_id: return &bpf_get_smp_processor_id_proto; #ifdef CONFIG_SOCK_CGROUP_DATA - case BPF_FUNC_skb_in_cgroup: - return &bpf_skb_in_cgroup_proto; + case BPF_FUNC_skb_under_cgroup: + return &bpf_skb_under_cgroup_proto; #endif default: return sk_filter_func_proto(func_id); diff --git a/samples/bpf/bpf_helpers.h b/samples/bpf/bpf_helpers.h index 217c8d507f2e..7927a090fa0d 100644 --- a/samples/bpf/bpf_helpers.h +++ b/samples/bpf/bpf_helpers.h @@ -72,8 +72,8 @@ static int (*bpf_l3_csum_replace)(void *ctx, int off, int from, int to, int flag (void *) BPF_FUNC_l3_csum_replace; static int (*bpf_l4_csum_replace)(void *ctx, int off, int from, int to, int flags) = (void *) BPF_FUNC_l4_csum_replace; -static int (*bpf_skb_in_cgroup)(void *ctx, void *map, int index) = - (void *) BPF_FUNC_skb_in_cgroup; +static int (*bpf_skb_under_cgroup)(void *ctx, void *map, int index) = + (void *) BPF_FUNC_skb_under_cgroup; #if defined(__x86_64__) diff --git a/samples/bpf/test_cgrp2_tc_kern.c b/samples/bpf/test_cgrp2_tc_kern.c index 2732c37c8d5b..10ff73404e3a 100644 --- a/samples/bpf/test_cgrp2_tc_kern.c +++ b/samples/bpf/test_cgrp2_tc_kern.c @@ -57,7 +57,7 @@ int handle_egress(struct __sk_buff *skb) bpf_trace_printk(dont_care_msg, sizeof(dont_care_msg), eth->h_proto, ip6h->nexthdr); return TC_ACT_OK; - } else if (bpf_skb_in_cgroup(skb, &test_cgrp2_array_pin, 0) != 1) { + } else if (bpf_skb_under_cgroup(skb, &test_cgrp2_array_pin, 0) != 1) { bpf_trace_printk(pass_msg, sizeof(pass_msg)); return TC_ACT_OK; } else { -- cgit v1.2.3 From b4c0e0c61f81dedc82dda35c287ea149ff98b434 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 11 Aug 2016 18:17:22 +0100 Subject: calipso: fix resource leak on calipso_genopt failure Currently, if calipso_genopt fails then the error exit path does not free the ipv6_opt_hdr new causing a memory leak. Fix this by kfree'ing new on the error exit path. Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- net/ipv6/calipso.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv6/calipso.c b/net/ipv6/calipso.c index c53b92c617c5..37ac9de713c6 100644 --- a/net/ipv6/calipso.c +++ b/net/ipv6/calipso.c @@ -952,8 +952,10 @@ calipso_opt_insert(struct ipv6_opt_hdr *hop, memcpy(new, hop, start); ret_val = calipso_genopt((unsigned char *)new, start, buf_len, doi_def, secattr); - if (ret_val < 0) + if (ret_val < 0) { + kfree(new); return ERR_PTR(ret_val); + } buf_len = start + ret_val; /* At this point buf_len aligns to 4n, so (buf_len & 4) pads to 8n */ -- cgit v1.2.3 From d7005652cd31dfc5660e1e32bf7e53538ef14987 Mon Sep 17 00:00:00 2001 From: "sean.wang@mediatek.com" Date: Sat, 13 Aug 2016 19:16:18 +0800 Subject: net: ethernet: mediatek: fixed that initializing u64_stats_sync is missing To fix runtime warning with lockdep is enabled due that u64_stats_sync is not initialized well, so add it. Signed-off-by: Sean Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index b57ae3afb994..fe17f8cee16b 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1751,6 +1751,7 @@ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np) goto free_netdev; } spin_lock_init(&mac->hw_stats->stats_lock); + u64_stats_init(&mac->hw_stats->syncp); mac->hw_stats->reg_offset = id * MTK_STAT_OFFSET; SET_NETDEV_DEV(eth->netdev[id], eth->dev); -- cgit v1.2.3 From e8c2993a4c9fdb0c9e6fc983edd5b52716ce7442 Mon Sep 17 00:00:00 2001 From: "sean.wang@mediatek.com" Date: Sat, 13 Aug 2016 19:16:19 +0800 Subject: net: ethernet: mediatek: add the missing of_node_put() after node is used done This patch adds the missing of_node_put() after finishing the usage of of_parse_phandle() or of_node_get() used by fixed_phy. Signed-off-by: Sean Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index fe17f8cee16b..003036114a1c 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -269,6 +269,8 @@ static int mtk_phy_connect(struct mtk_mac *mac) ADVERTISED_Autoneg; phy_start_aneg(mac->phy_dev); + of_node_put(np); + return 0; } -- cgit v1.2.3 From 0ed661d5a48fa6df0b50ae64d27fe759a3ce42cf Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 11 Aug 2016 21:38:37 +0200 Subject: bpf: fix write helpers with regards to non-linear parts Fix the bpf_try_make_writable() helper and all call sites we have in BPF, it's currently defect with regards to skbs when the write_len spans into non-linear parts, no matter if cloned or not. There are multiple issues at once. First, using skb_store_bits() is not correct since even if we have a cloned skb, page frags can still be shared. To really make them private, we need to pull them in via __pskb_pull_tail() first, which also gets us a private head via pskb_expand_head() implicitly. This is for helpers like bpf_skb_store_bytes(), bpf_l3_csum_replace(), bpf_l4_csum_replace(). Really, the only thing reasonable and working here is to call skb_ensure_writable() before any write operation. Meaning, via pskb_may_pull() it makes sure that parts we want to access are pulled in and if not does so plus unclones the skb implicitly. If our write_len still fits the headlen and we're cloned and our header of the clone is not writable, then we need to make a private copy via pskb_expand_head(). skb_store_bits() is a bit misleading and only safe to store into non-linear data in different contexts such as 357b40a18b04 ("[IPV6]: IPV6_CHECKSUM socket option can corrupt kernel memory"). For above BPF helper functions, it means after fixed bpf_try_make_writable(), we've pulled in enough, so that we operate always based on skb->data. Thus, the call to skb_header_pointer() and skb_store_bits() becomes superfluous. In bpf_skb_store_bytes(), the len check is unnecessary too since it can only pass in maximum of BPF stack size, so adding offset is guaranteed to never overflow. Also bpf_l3/4_csum_replace() helpers must test for proper offset alignment since they use __sum16 pointer for writing resulting csum. The remaining helpers that change skb data not discussed here yet are bpf_skb_vlan_push(), bpf_skb_vlan_pop() and bpf_skb_change_proto(). The vlan helpers internally call either skb_ensure_writable() (pop case) and skb_cow_head() (push case, for head expansion), respectively. Similarly, bpf_skb_proto_xlat() takes care to not mangle page frags. Fixes: 608cd71a9c7c ("tc: bpf: generalize pedit action") Fixes: 91bc4822c3d6 ("tc: bpf: add checksum helpers") Fixes: 3697649ff29e ("bpf: try harder on clones when writing into skb") Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- net/core/filter.c | 70 ++++++++++++++----------------------------------------- 1 file changed, 18 insertions(+), 52 deletions(-) diff --git a/net/core/filter.c b/net/core/filter.c index bd9bf2e5fafa..cb06aceb512a 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -1355,13 +1355,9 @@ static inline int bpf_try_make_writable(struct sk_buff *skb, { int err; - if (!skb_cloned(skb)) - return 0; - if (skb_clone_writable(skb, write_len)) - return 0; - err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - if (!err) - bpf_compute_data_end(skb); + err = skb_ensure_writable(skb, write_len); + bpf_compute_data_end(skb); + return err; } @@ -1379,42 +1375,25 @@ static inline void bpf_pull_mac_rcsum(struct sk_buff *skb) static u64 bpf_skb_store_bytes(u64 r1, u64 r2, u64 r3, u64 r4, u64 flags) { - struct bpf_scratchpad *sp = this_cpu_ptr(&bpf_sp); struct sk_buff *skb = (struct sk_buff *) (long) r1; - int offset = (int) r2; + unsigned int offset = (unsigned int) r2; void *from = (void *) (long) r3; unsigned int len = (unsigned int) r4; void *ptr; if (unlikely(flags & ~(BPF_F_RECOMPUTE_CSUM | BPF_F_INVALIDATE_HASH))) return -EINVAL; - - /* bpf verifier guarantees that: - * 'from' pointer points to bpf program stack - * 'len' bytes of it were initialized - * 'len' > 0 - * 'skb' is a valid pointer to 'struct sk_buff' - * - * so check for invalid 'offset' and too large 'len' - */ - if (unlikely((u32) offset > 0xffff || len > sizeof(sp->buff))) + if (unlikely(offset > 0xffff)) return -EFAULT; if (unlikely(bpf_try_make_writable(skb, offset + len))) return -EFAULT; - ptr = skb_header_pointer(skb, offset, len, sp->buff); - if (unlikely(!ptr)) - return -EFAULT; - + ptr = skb->data + offset; if (flags & BPF_F_RECOMPUTE_CSUM) __skb_postpull_rcsum(skb, ptr, len, offset); memcpy(ptr, from, len); - if (ptr == sp->buff) - /* skb_store_bits cannot return -EFAULT here */ - skb_store_bits(skb, offset, ptr, len); - if (flags & BPF_F_RECOMPUTE_CSUM) __skb_postpush_rcsum(skb, ptr, len, offset); if (flags & BPF_F_INVALIDATE_HASH) @@ -1437,12 +1416,12 @@ static const struct bpf_func_proto bpf_skb_store_bytes_proto = { static u64 bpf_skb_load_bytes(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5) { const struct sk_buff *skb = (const struct sk_buff *)(unsigned long) r1; - int offset = (int) r2; + unsigned int offset = (unsigned int) r2; void *to = (void *)(unsigned long) r3; unsigned int len = (unsigned int) r4; void *ptr; - if (unlikely((u32) offset > 0xffff)) + if (unlikely(offset > 0xffff)) goto err_clear; ptr = skb_header_pointer(skb, offset, len, to); @@ -1470,20 +1449,17 @@ static const struct bpf_func_proto bpf_skb_load_bytes_proto = { static u64 bpf_l3_csum_replace(u64 r1, u64 r2, u64 from, u64 to, u64 flags) { struct sk_buff *skb = (struct sk_buff *) (long) r1; - int offset = (int) r2; - __sum16 sum, *ptr; + unsigned int offset = (unsigned int) r2; + __sum16 *ptr; if (unlikely(flags & ~(BPF_F_HDR_FIELD_MASK))) return -EINVAL; - if (unlikely((u32) offset > 0xffff)) - return -EFAULT; - if (unlikely(bpf_try_make_writable(skb, offset + sizeof(sum)))) + if (unlikely(offset > 0xffff || offset & 1)) return -EFAULT; - - ptr = skb_header_pointer(skb, offset, sizeof(sum), &sum); - if (unlikely(!ptr)) + if (unlikely(bpf_try_make_writable(skb, offset + sizeof(*ptr)))) return -EFAULT; + ptr = (__sum16 *)(skb->data + offset); switch (flags & BPF_F_HDR_FIELD_MASK) { case 0: if (unlikely(from != 0)) @@ -1501,10 +1477,6 @@ static u64 bpf_l3_csum_replace(u64 r1, u64 r2, u64 from, u64 to, u64 flags) return -EINVAL; } - if (ptr == &sum) - /* skb_store_bits guaranteed to not return -EFAULT here */ - skb_store_bits(skb, offset, ptr, sizeof(sum)); - return 0; } @@ -1524,20 +1496,18 @@ static u64 bpf_l4_csum_replace(u64 r1, u64 r2, u64 from, u64 to, u64 flags) struct sk_buff *skb = (struct sk_buff *) (long) r1; bool is_pseudo = flags & BPF_F_PSEUDO_HDR; bool is_mmzero = flags & BPF_F_MARK_MANGLED_0; - int offset = (int) r2; - __sum16 sum, *ptr; + unsigned int offset = (unsigned int) r2; + __sum16 *ptr; if (unlikely(flags & ~(BPF_F_MARK_MANGLED_0 | BPF_F_PSEUDO_HDR | BPF_F_HDR_FIELD_MASK))) return -EINVAL; - if (unlikely((u32) offset > 0xffff)) + if (unlikely(offset > 0xffff || offset & 1)) return -EFAULT; - if (unlikely(bpf_try_make_writable(skb, offset + sizeof(sum)))) + if (unlikely(bpf_try_make_writable(skb, offset + sizeof(*ptr)))) return -EFAULT; - ptr = skb_header_pointer(skb, offset, sizeof(sum), &sum); - if (unlikely(!ptr)) - return -EFAULT; + ptr = (__sum16 *)(skb->data + offset); if (is_mmzero && !*ptr) return 0; @@ -1560,10 +1530,6 @@ static u64 bpf_l4_csum_replace(u64 r1, u64 r2, u64 from, u64 to, u64 flags) if (is_mmzero && !*ptr) *ptr = CSUM_MANGLED_0; - if (ptr == &sum) - /* skb_store_bits guaranteed to not return -EFAULT here */ - skb_store_bits(skb, offset, ptr, sizeof(sum)); - return 0; } -- cgit v1.2.3 From c15c0ab12fd62f2b19181d05c62d24bc9fa55a42 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 12 Aug 2016 07:48:21 +0200 Subject: ipv6: suppress sparse warnings in IP6_ECN_set_ce() Pass the correct type __wsum to csum_sub() and csum_add(). This doesn't really change anything since __wsum really *is* __be32, but removes the address space warnings from sparse. Cc: Eric Dumazet Fixes: 34ae6a1aa054 ("ipv6: update skb->csum when CE mark is propagated") Signed-off-by: Johannes Berg Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/inet_ecn.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/net/inet_ecn.h b/include/net/inet_ecn.h index 0dc0a51da38f..dce2d586d9ce 100644 --- a/include/net/inet_ecn.h +++ b/include/net/inet_ecn.h @@ -128,7 +128,8 @@ static inline int IP6_ECN_set_ce(struct sk_buff *skb, struct ipv6hdr *iph) to = from | htonl(INET_ECN_CE << 20); *(__be32 *)iph = to; if (skb->ip_summed == CHECKSUM_COMPLETE) - skb->csum = csum_add(csum_sub(skb->csum, from), to); + skb->csum = csum_add(csum_sub(skb->csum, (__force __wsum)from), + (__force __wsum)to); return 1; } -- cgit v1.2.3 From 5ba092efc7ddff040777ae7162f1d195f513571b Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Fri, 12 Aug 2016 10:29:13 +0200 Subject: net/irda: handle iriap_register_lsap() allocation failure If iriap_register_lsap() fails to allocate memory, self->lsap is set to NULL. However, none of the callers handle the failure and irlmp_connect_request() will happily dereference it: iriap_register_lsap: Unable to allocated LSAP! ================================================================================ UBSAN: Undefined behaviour in net/irda/irlmp.c:378:2 member access within null pointer of type 'struct lsap_cb' CPU: 1 PID: 15403 Comm: trinity-c0 Not tainted 4.8.0-rc1+ #81 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 0000000000000000 ffff88010c7e78a8 ffffffff82344f40 0000000041b58ab3 ffffffff84f98000 ffffffff82344e94 ffff88010c7e78d0 ffff88010c7e7880 ffff88010630ad00 ffffffff84a5fae0 ffffffff84d3f5c0 000000000000017a Call Trace: [] dump_stack+0xac/0xfc [] ubsan_epilogue+0xd/0x8a [] __ubsan_handle_type_mismatch+0x157/0x411 [] irlmp_connect_request+0x7ac/0x970 [] iriap_connect_request+0xa0/0x160 [] state_s_disconnect+0x88/0xd0 [] iriap_do_client_event+0x94/0x120 [] iriap_getvaluebyclass_request+0x3e0/0x6d0 [] irda_find_lsap_sel+0x1eb/0x630 [] irda_connect+0x828/0x12d0 [] SYSC_connect+0x22b/0x340 [] SyS_connect+0x9/0x10 [] do_syscall_64+0x1b3/0x4b0 [] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================================ The bug seems to have been around since forever. There's more problems with missing error checks in iriap_init() (and indeed all of irda_init()), but that's a bigger problem that needs very careful review and testing. This patch will fix the most serious bug (as it's easily reached from unprivileged userspace). I have tested my patch with a reproducer. Signed-off-by: Vegard Nossum Signed-off-by: David S. Miller --- net/irda/iriap.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/irda/iriap.c b/net/irda/iriap.c index 4a7ae32afa09..1138eaf5c682 100644 --- a/net/irda/iriap.c +++ b/net/irda/iriap.c @@ -185,8 +185,12 @@ struct iriap_cb *iriap_open(__u8 slsap_sel, int mode, void *priv, self->magic = IAS_MAGIC; self->mode = mode; - if (mode == IAS_CLIENT) - iriap_register_lsap(self, slsap_sel, mode); + if (mode == IAS_CLIENT) { + if (iriap_register_lsap(self, slsap_sel, mode)) { + kfree(self); + return NULL; + } + } self->confirm = callback; self->priv = priv; -- cgit v1.2.3 From 54236ab09e9696a27baaae693c288920a26e8588 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Fri, 12 Aug 2016 09:50:51 +0200 Subject: net/sctp: always initialise sctp_ht_iter::start_fail sctp_transport_seq_start() does not currently clear iter->start_fail on success, but relies on it being zero when it is allocated (by seq_open_net()). This can be a problem in the following sequence: open() // allocates iter (and implicitly sets iter->start_fail = 0) read() - iter->start() // fails and sets iter->start_fail = 1 - iter->stop() // doesn't call sctp_transport_walk_stop() (correct) read() again - iter->start() // succeeds, but doesn't change iter->start_fail - iter->stop() // doesn't call sctp_transport_walk_stop() (wrong) We should initialize sctp_ht_iter::start_fail to zero if ->start() succeeds, otherwise it's possible that we leave an old value of 1 there, which will cause ->stop() to not call sctp_transport_walk_stop(), which causes all sorts of problems like not calling rcu_read_unlock() (and preempt_enable()), eventually leading to more warnings like this: BUG: sleeping function called from invalid context at mm/slab.h:388 in_atomic(): 0, irqs_disabled(): 0, pid: 16551, name: trinity-c2 Preemption disabled at:[] rhashtable_walk_start+0x46/0x150 [] preempt_count_add+0x1fb/0x280 [] _raw_spin_lock+0x12/0x40 [] rhashtable_walk_start+0x46/0x150 [] sctp_transport_walk_start+0x2f/0x60 [] sctp_transport_seq_start+0x4d/0x150 [] traverse+0x170/0x850 [] seq_read+0x7cc/0x1180 [] proc_reg_read+0xbc/0x180 [] do_loop_readv_writev+0x134/0x210 [] do_readv_writev+0x565/0x660 [] vfs_readv+0x67/0xa0 [] do_preadv+0x126/0x170 [] SyS_preadv+0xc/0x10 [] do_syscall_64+0x19c/0x410 [] return_from_SYSCALL_64+0x0/0x6a [] 0xffffffffffffffff Notice that this is a subtly different stacktrace from the one in commit 5fc382d875 ("net/sctp: terminate rhashtable walk correctly"). Cc: Xin Long Cc: Herbert Xu Cc: Eric W. Biederman Cc: Marcelo Ricardo Leitner Signed-off-by: Vegard Nossum Acked-By: Neil Horman Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- net/sctp/proc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/sctp/proc.c b/net/sctp/proc.c index 4cb5aedfe3ee..ef8ba77a5bea 100644 --- a/net/sctp/proc.c +++ b/net/sctp/proc.c @@ -293,6 +293,7 @@ static void *sctp_transport_seq_start(struct seq_file *seq, loff_t *pos) return ERR_PTR(err); } + iter->start_fail = 0; return sctp_transport_get_idx(seq_file_net(seq), &iter->hti, *pos); } -- cgit v1.2.3 From bc561632dddd5af0c4444d919f01cbf6d553aa0a Mon Sep 17 00:00:00 2001 From: Mike Manning Date: Fri, 12 Aug 2016 12:02:38 +0100 Subject: net: ipv6: Do not keep IPv6 addresses when IPv6 is disabled If IPv6 is disabled when the option is set to keep IPv6 addresses on link down, userspace is unaware of this as there is no such indication via netlink. The solution is to remove the IPv6 addresses in this case, which results in netlink messages indicating removal of addresses in the usual manner. This fix also makes the behavior consistent with the case of having IPv6 disabled first, which stops IPv6 addresses from being added. Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: Mike Manning Acked-by: David Ahern Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index ab3e796596b1..df8425fcbc2c 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -3543,7 +3543,7 @@ static int addrconf_ifdown(struct net_device *dev, int how) /* combine the user config with event to determine if permanent * addresses are to be removed from address hash table */ - keep_addr = !(how || _keep_addr <= 0); + keep_addr = !(how || _keep_addr <= 0 || idev->cnf.disable_ipv6); /* Step 2: clear hash table */ for (i = 0; i < IN6_ADDR_HSIZE; i++) { @@ -3599,7 +3599,7 @@ restart: /* re-combine the user config with event to determine if permanent * addresses are to be removed from the interface list */ - keep_addr = (!how && _keep_addr > 0); + keep_addr = (!how && _keep_addr > 0 && !idev->cnf.disable_ipv6); INIT_LIST_HEAD(&del_list); list_for_each_entry_safe(ifa, tmp, &idev->addr_list, if_list) { -- cgit v1.2.3 From e20038724552cd05e351cd7d7526d646953d26b7 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 12 Aug 2016 16:10:32 +0200 Subject: macsec: fix lockdep splats when nesting devices Currently, trying to setup a vlan over a macsec device, or other combinations of devices, triggers a lockdep warning. Use netdev_lockdep_set_classes and ndo_get_lock_subclass, similar to what macvlan does. Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller --- drivers/net/macsec.c | 29 +++++++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index dbd590a8177f..2043e8c97a81 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -270,6 +270,7 @@ struct macsec_dev { struct pcpu_secy_stats __percpu *stats; struct list_head secys; struct gro_cells gro_cells; + unsigned int nest_level; }; /** @@ -2699,6 +2700,8 @@ static netdev_tx_t macsec_start_xmit(struct sk_buff *skb, #define MACSEC_FEATURES \ (NETIF_F_SG | NETIF_F_HIGHDMA | NETIF_F_FRAGLIST) +static struct lock_class_key macsec_netdev_addr_lock_key; + static int macsec_dev_init(struct net_device *dev) { struct macsec_dev *macsec = macsec_priv(dev); @@ -2910,6 +2913,13 @@ static int macsec_get_iflink(const struct net_device *dev) return macsec_priv(dev)->real_dev->ifindex; } + +static int macsec_get_nest_level(struct net_device *dev) +{ + return macsec_priv(dev)->nest_level; +} + + static const struct net_device_ops macsec_netdev_ops = { .ndo_init = macsec_dev_init, .ndo_uninit = macsec_dev_uninit, @@ -2923,6 +2933,7 @@ static const struct net_device_ops macsec_netdev_ops = { .ndo_start_xmit = macsec_start_xmit, .ndo_get_stats64 = macsec_get_stats64, .ndo_get_iflink = macsec_get_iflink, + .ndo_get_lock_subclass = macsec_get_nest_level, }; static const struct device_type macsec_type = { @@ -3050,10 +3061,12 @@ static void macsec_del_dev(struct macsec_dev *macsec) static void macsec_common_dellink(struct net_device *dev, struct list_head *head) { struct macsec_dev *macsec = macsec_priv(dev); + struct net_device *real_dev = macsec->real_dev; unregister_netdevice_queue(dev, head); list_del_rcu(&macsec->secys); macsec_del_dev(macsec); + netdev_upper_dev_unlink(real_dev, dev); macsec_generation++; } @@ -3188,6 +3201,16 @@ static int macsec_newlink(struct net *net, struct net_device *dev, dev_hold(real_dev); + macsec->nest_level = dev_get_nest_level(real_dev, netif_is_macsec) + 1; + netdev_lockdep_set_classes(dev); + lockdep_set_class_and_subclass(&dev->addr_list_lock, + &macsec_netdev_addr_lock_key, + macsec_get_nest_level(dev)); + + err = netdev_upper_dev_link(real_dev, dev); + if (err < 0) + goto unregister; + /* need to be already registered so that ->init has run and * the MAC addr is set */ @@ -3200,12 +3223,12 @@ static int macsec_newlink(struct net *net, struct net_device *dev, if (rx_handler && sci_exists(real_dev, sci)) { err = -EBUSY; - goto unregister; + goto unlink; } err = macsec_add_dev(dev, sci, icv_len); if (err) - goto unregister; + goto unlink; if (data) macsec_changelink_common(dev, data); @@ -3220,6 +3243,8 @@ static int macsec_newlink(struct net *net, struct net_device *dev, del_dev: macsec_del_dev(macsec); +unlink: + netdev_upper_dev_unlink(real_dev, dev); unregister: unregister_netdevice(dev); return err; -- cgit v1.2.3 From 952fcfd08c8109951622579d0ae7b9cd6cafd688 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 12 Aug 2016 16:10:33 +0200 Subject: net: remove type_check from dev_get_nest_level() The idea for type_check in dev_get_nest_level() was to count the number of nested devices of the same type (currently, only macvlan or vlan devices). This prevented the false positive lockdep warning on configurations such as: eth0 <--- macvlan0 <--- vlan0 <--- macvlan1 However, this doesn't prevent a warning on a configuration such as: eth0 <--- macvlan0 <--- vlan0 eth1 <--- vlan1 <--- macvlan1 In this case, all the locks end up with a nesting subclass of 1, so lockdep thinks that there is still a deadlock: - in the first case we have (macvlan_netdev_addr_lock_key, 1) and then take (vlan_netdev_xmit_lock_key, 1) - in the second case, we have (vlan_netdev_xmit_lock_key, 1) and then take (macvlan_netdev_addr_lock_key, 1) By removing the linktype check in dev_get_nest_level() and always incrementing the nesting depth, lockdep considers this configuration valid. Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller --- drivers/net/macsec.c | 2 +- drivers/net/macvlan.c | 2 +- include/linux/netdevice.h | 3 +-- net/8021q/vlan.c | 2 +- net/core/dev.c | 10 +++------- 5 files changed, 7 insertions(+), 12 deletions(-) diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 2043e8c97a81..351e701eb043 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -3201,7 +3201,7 @@ static int macsec_newlink(struct net *net, struct net_device *dev, dev_hold(real_dev); - macsec->nest_level = dev_get_nest_level(real_dev, netif_is_macsec) + 1; + macsec->nest_level = dev_get_nest_level(real_dev) + 1; netdev_lockdep_set_classes(dev); lockdep_set_class_and_subclass(&dev->addr_list_lock, &macsec_netdev_addr_lock_key, diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index cd9b53834bf6..3234fcdea317 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -1315,7 +1315,7 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev, vlan->dev = dev; vlan->port = port; vlan->set_features = MACVLAN_FEATURES; - vlan->nest_level = dev_get_nest_level(lowerdev, netif_is_macvlan) + 1; + vlan->nest_level = dev_get_nest_level(lowerdev) + 1; vlan->mode = MACVLAN_MODE_VEPA; if (data && data[IFLA_MACVLAN_MODE]) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 076df5360ba5..3a788bf0affd 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -3891,8 +3891,7 @@ void netdev_default_l2upper_neigh_destroy(struct net_device *dev, extern u8 netdev_rss_key[NETDEV_RSS_KEY_LEN] __read_mostly; void netdev_rss_key_fill(void *buffer, size_t len); -int dev_get_nest_level(struct net_device *dev, - bool (*type_check)(const struct net_device *dev)); +int dev_get_nest_level(struct net_device *dev); int skb_checksum_help(struct sk_buff *skb); struct sk_buff *__skb_gso_segment(struct sk_buff *skb, netdev_features_t features, bool tx_path); diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 82a116ba590e..8de138d3306b 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -169,7 +169,7 @@ int register_vlan_dev(struct net_device *dev) if (err < 0) goto out_uninit_mvrp; - vlan->nest_level = dev_get_nest_level(real_dev, is_vlan_dev) + 1; + vlan->nest_level = dev_get_nest_level(real_dev) + 1; err = register_netdevice(dev); if (err < 0) goto out_uninit_mvrp; diff --git a/net/core/dev.c b/net/core/dev.c index 4ce07dc25573..dd6ce598de89 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -6045,8 +6045,7 @@ void *netdev_lower_dev_get_private(struct net_device *dev, EXPORT_SYMBOL(netdev_lower_dev_get_private); -int dev_get_nest_level(struct net_device *dev, - bool (*type_check)(const struct net_device *dev)) +int dev_get_nest_level(struct net_device *dev) { struct net_device *lower = NULL; struct list_head *iter; @@ -6056,15 +6055,12 @@ int dev_get_nest_level(struct net_device *dev, ASSERT_RTNL(); netdev_for_each_lower_dev(dev, lower, iter) { - nest = dev_get_nest_level(lower, type_check); + nest = dev_get_nest_level(lower); if (max_nest < nest) max_nest = nest; } - if (type_check(dev)) - max_nest++; - - return max_nest; + return max_nest + 1; } EXPORT_SYMBOL(dev_get_nest_level); -- cgit v1.2.3 From d1669c8288a2c86daa6fd59c7fb938c08589d053 Mon Sep 17 00:00:00 2001 From: Markus Heiser Date: Fri, 5 Aug 2016 11:19:43 +0200 Subject: doc-rst: customize RTD theme, drop padding of inline literal Remove the distracting (left/right) padding of inline literals. (HTML ). Requested and discussed in [1]. [1] http://www.spinics.net/lists/linux-media/msg103991.html Signed-off-by: Markus Heiser Acked-by: Hans Verkuil Signed-off-by: Jonathan Corbet --- Documentation/sphinx-static/theme_overrides.css | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/sphinx-static/theme_overrides.css b/Documentation/sphinx-static/theme_overrides.css index 3a2ac4bcfd78..e88461c4c1e6 100644 --- a/Documentation/sphinx-static/theme_overrides.css +++ b/Documentation/sphinx-static/theme_overrides.css @@ -42,11 +42,12 @@ caption a.headerlink { opacity: 0; } caption a.headerlink:hover { opacity: 1; } - /* inline literal: drop the borderbox and red color */ + /* inline literal: drop the borderbox, padding and red color */ code, .rst-content tt, .rst-content code { color: inherit; border: none; + padding: unset; background: inherit; font-size: 85%; } -- cgit v1.2.3 From ce8cb803d8b90458495f23606c706f0c0c857cdc Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 12 Aug 2016 18:40:23 +0200 Subject: i2c: mux: demux-pinctrl: properly roll back when adding adapter fails We also need to revert the dynamic OF change, so we get a consistent state again. Otherwise, we might have two devices enabled e.g. after pinctrl setup fails. Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/muxes/i2c-demux-pinctrl.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c index 8de073aed001..215ac87f606d 100644 --- a/drivers/i2c/muxes/i2c-demux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c @@ -68,7 +68,7 @@ static int i2c_demux_activate_master(struct i2c_demux_pinctrl_priv *priv, u32 ne adap = of_find_i2c_adapter_by_node(priv->chan[new_chan].parent_np); if (!adap) { ret = -ENODEV; - goto err; + goto err_with_revert; } p = devm_pinctrl_get_select(adap->dev.parent, priv->bus_name); @@ -103,6 +103,8 @@ static int i2c_demux_activate_master(struct i2c_demux_pinctrl_priv *priv, u32 ne err_with_put: i2c_put_adapter(adap); + err_with_revert: + of_changeset_revert(&priv->chan[new_chan].chgset); err: dev_err(priv->dev, "failed to setup demux-adapter %d (%d)\n", new_chan, ret); return ret; -- cgit v1.2.3 From 4d01d88019261d05ec3bff5f1a6013393faa3b9e Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 10 Aug 2016 13:37:18 -0700 Subject: i2c: cros-ec-tunnel: Fix usage of cros_ec_cmd_xfer() cros_ec_cmd_xfer returns success status if the command transport completes successfully, but the execution result is incorrectly ignored. In many cases, the execution result is assumed to be successful, leading to ignored errors and operating on uninitialized data. We've recently introduced the cros_ec_cmd_xfer_status() helper to avoid these problems. Let's use it. [Regarding the 'Fixes' tag; there is significant refactoring since the driver's introduction, but the underlying logical error exists throughout I believe] Fixes: 9d230c9e4f4e ("i2c: ChromeOS EC tunnel driver") Cc: # 9798ac6d32c1 mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper Signed-off-by: Brian Norris Reviewed-by: Javier Martinez Canillas Reviewed-by: Guenter Roeck Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-cros-ec-tunnel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c index a0d95ff682ae..2d5ff86398d0 100644 --- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c @@ -215,7 +215,7 @@ static int ec_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg i2c_msgs[], msg->outsize = request_len; msg->insize = response_len; - result = cros_ec_cmd_xfer(bus->ec, msg); + result = cros_ec_cmd_xfer_status(bus->ec, msg); if (result < 0) { dev_err(dev, "Error transferring EC i2c message %d\n", result); goto exit; -- cgit v1.2.3 From 97ccd4af120c6ee183f424f17672870809bd6efd Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Thu, 4 Aug 2016 02:38:44 +0300 Subject: i2c: ocores: add missed clk_disable_unprepare() on failure paths clk_disable_unprepare() is missed on failure paths in ocores_i2c_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: Peter Korsgaard Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-ocores.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index dfa7a4b4a91d..ac88a524143e 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -379,6 +379,7 @@ static int ocores_i2c_of_probe(struct platform_device *pdev, if (!clock_frequency_present) { dev_err(&pdev->dev, "Missing required parameter 'opencores,ip-clock-frequency'\n"); + clk_disable_unprepare(i2c->clk); return -ENODEV; } i2c->ip_clock_khz = clock_frequency / 1000; @@ -467,20 +468,21 @@ static int ocores_i2c_probe(struct platform_device *pdev) default: dev_err(&pdev->dev, "Unsupported I/O width (%d)\n", i2c->reg_io_width); - return -EINVAL; + ret = -EINVAL; + goto err_clk; } } ret = ocores_init(&pdev->dev, i2c); if (ret) - return ret; + goto err_clk; init_waitqueue_head(&i2c->wait); ret = devm_request_irq(&pdev->dev, irq, ocores_isr, 0, pdev->name, i2c); if (ret) { dev_err(&pdev->dev, "Cannot claim IRQ\n"); - return ret; + goto err_clk; } /* hook up driver to tree */ @@ -494,7 +496,7 @@ static int ocores_i2c_probe(struct platform_device *pdev) ret = i2c_add_adapter(&i2c->adap); if (ret) { dev_err(&pdev->dev, "Failed to add adapter\n"); - return ret; + goto err_clk; } /* add in known devices to the bus */ @@ -504,6 +506,10 @@ static int ocores_i2c_probe(struct platform_device *pdev) } return 0; + +err_clk: + clk_disable_unprepare(i2c->clk); + return ret; } static int ocores_i2c_remove(struct platform_device *pdev) -- cgit v1.2.3 From 434f14e745442a4230a40cf47f84deac1028f64f Mon Sep 17 00:00:00 2001 From: Cyrille Pitchen Date: Wed, 3 Aug 2016 16:58:26 +0200 Subject: i2c: at91: fix support of the "alternative command" feature The "alternative command" feature was introduced with sama5d2 SoCs. Its purpose is to let the hardware i2c controller automatically send the STOP condition on the i2c bus at the end of a data transfer. Without this feature, the i2c driver has to write the 'STOP' bit into the Control Register so the hardware i2c controller is triggered to send the STOP condition on the bus. Using the "alternative command" feature requires to set the transfer data length into the 8bit DATAL field of the Alternative Command Register. Hence only data transfers up to 255 bytes can take advantage of the "alternative command" feature. For greater data transfer sizes, the driver should use the previous implementation, when the "alternative command" support was not implemented yet. Signed-off-by: Cyrille Pitchen Signed-off-by: Ludovic Desroches Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-at91.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index f23372669f77..1bb97f658b47 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -38,6 +38,7 @@ #define AT91_I2C_TIMEOUT msecs_to_jiffies(100) /* transfer timeout */ #define AT91_I2C_DMA_THRESHOLD 8 /* enable DMA if transfer size is bigger than this threshold */ #define AUTOSUSPEND_TIMEOUT 2000 +#define AT91_I2C_MAX_ALT_CMD_DATA_SIZE 256 /* AT91 TWI register definitions */ #define AT91_TWI_CR 0x0000 /* Control Register */ @@ -141,6 +142,7 @@ struct at91_twi_dev { unsigned twi_cwgr_reg; struct at91_twi_pdata *pdata; bool use_dma; + bool use_alt_cmd; bool recv_len_abort; u32 fifo_size; struct at91_twi_dma dma; @@ -269,7 +271,7 @@ static void at91_twi_write_next_byte(struct at91_twi_dev *dev) /* send stop when last byte has been written */ if (--dev->buf_len == 0) - if (!dev->pdata->has_alt_cmd) + if (!dev->use_alt_cmd) at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); dev_dbg(dev->dev, "wrote 0x%x, to go %d\n", *dev->buf, dev->buf_len); @@ -292,7 +294,7 @@ static void at91_twi_write_data_dma_callback(void *data) * we just have to enable TXCOMP one. */ at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP); - if (!dev->pdata->has_alt_cmd) + if (!dev->use_alt_cmd) at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); } @@ -410,7 +412,7 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev) } /* send stop if second but last byte has been read */ - if (!dev->pdata->has_alt_cmd && dev->buf_len == 1) + if (!dev->use_alt_cmd && dev->buf_len == 1) at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); dev_dbg(dev->dev, "read 0x%x, to go %d\n", *dev->buf, dev->buf_len); @@ -426,7 +428,7 @@ static void at91_twi_read_data_dma_callback(void *data) dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg[0]), dev->buf_len, DMA_FROM_DEVICE); - if (!dev->pdata->has_alt_cmd) { + if (!dev->use_alt_cmd) { /* The last two bytes have to be read without using dma */ dev->buf += dev->buf_len - 2; dev->buf_len = 2; @@ -443,7 +445,7 @@ static void at91_twi_read_data_dma(struct at91_twi_dev *dev) struct dma_chan *chan_rx = dma->chan_rx; size_t buf_len; - buf_len = (dev->pdata->has_alt_cmd) ? dev->buf_len : dev->buf_len - 2; + buf_len = (dev->use_alt_cmd) ? dev->buf_len : dev->buf_len - 2; dma->direction = DMA_FROM_DEVICE; /* Keep in mind that we won't use dma to read the last two bytes */ @@ -651,7 +653,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) unsigned start_flags = AT91_TWI_START; /* if only one byte is to be read, immediately stop transfer */ - if (!has_alt_cmd && dev->buf_len <= 1 && + if (!dev->use_alt_cmd && dev->buf_len <= 1 && !(dev->msg->flags & I2C_M_RECV_LEN)) start_flags |= AT91_TWI_STOP; at91_twi_write(dev, AT91_TWI_CR, start_flags); @@ -745,7 +747,7 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num) int ret; unsigned int_addr_flag = 0; struct i2c_msg *m_start = msg; - bool is_read, use_alt_cmd = false; + bool is_read; dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num); @@ -768,14 +770,16 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num) at91_twi_write(dev, AT91_TWI_IADR, internal_address); } + dev->use_alt_cmd = false; is_read = (m_start->flags & I2C_M_RD); if (dev->pdata->has_alt_cmd) { - if (m_start->len > 0) { + if (m_start->len > 0 && + m_start->len < AT91_I2C_MAX_ALT_CMD_DATA_SIZE) { at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_ACMEN); at91_twi_write(dev, AT91_TWI_ACR, AT91_TWI_ACR_DATAL(m_start->len) | ((is_read) ? AT91_TWI_ACR_DIR : 0)); - use_alt_cmd = true; + dev->use_alt_cmd = true; } else { at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_ACMDIS); } @@ -784,7 +788,7 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num) at91_twi_write(dev, AT91_TWI_MMR, (m_start->addr << 16) | int_addr_flag | - ((!use_alt_cmd && is_read) ? AT91_TWI_MREAD : 0)); + ((!dev->use_alt_cmd && is_read) ? AT91_TWI_MREAD : 0)); dev->buf_len = m_start->len; dev->buf = m_start->buf; -- cgit v1.2.3 From 8d263be8716da67bd8746e266c1934cb9c9933cc Mon Sep 17 00:00:00 2001 From: Daniel Wagner Date: Wed, 3 Aug 2016 14:03:08 +0200 Subject: i2c: bcm-iproc: Use complete() instead of complete_all() There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The usage pattern of the completion is: bcm_iproc_i2c_xfer_single_msg() reinit_completion() ... (activate the transfer) ... wait_for_completion_timeout() Signed-off-by: Daniel Wagner Acked-by: Ray Jui Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-bcm-iproc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c index 19c843828fe2..95f7cac76f89 100644 --- a/drivers/i2c/busses/i2c-bcm-iproc.c +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -158,7 +158,7 @@ static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data) if (status & BIT(IS_M_START_BUSY_SHIFT)) { iproc_i2c->xfer_is_done = 1; - complete_all(&iproc_i2c->done); + complete(&iproc_i2c->done); } writel(status, iproc_i2c->base + IS_OFFSET); -- cgit v1.2.3 From 752c3899f97c469efea42b1ad6de66d18a21ce09 Mon Sep 17 00:00:00 2001 From: Daniel Wagner Date: Wed, 3 Aug 2016 14:03:09 +0200 Subject: i2c: bcm-kona: Use complete() instead of complete_all() There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The usage pattern of the completion is: bcm_kona_send_i2c_cmd() reinit_completion() ... bcm_kona_i2c_send_cmd_to_ctrl() ... wait_for_completion_timeout() Signed-off-by: Daniel Wagner Acked-by: Ray Jui Reviewed-by: Tim Kryger Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-bcm-kona.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c index ac9f47679c3a..f98743277e3c 100644 --- a/drivers/i2c/busses/i2c-bcm-kona.c +++ b/drivers/i2c/busses/i2c-bcm-kona.c @@ -229,7 +229,7 @@ static irqreturn_t bcm_kona_i2c_isr(int irq, void *devid) dev->base + TXFCR_OFFSET); writel(status & ~ISR_RESERVED_MASK, dev->base + ISR_OFFSET); - complete_all(&dev->done); + complete(&dev->done); return IRQ_HANDLED; } -- cgit v1.2.3 From fea03a6ab1d8e456c0319c194150621629504f80 Mon Sep 17 00:00:00 2001 From: Daniel Wagner Date: Wed, 3 Aug 2016 14:03:10 +0200 Subject: i2c: brcmstb: Use complete() instead of complete_all() There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The usage pattern of the completion is: brcmstb_send_i2c_cmd() reinit_completion() ... /* initiate transfer by setting iic_enable */ ... brcmstb_i2c_wait_for_completion() Signed-off-by: Daniel Wagner Reviewed-by: Kamal Dasu Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-brcmstb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c index 3f5a4d71d3bf..385b57bfcb38 100644 --- a/drivers/i2c/busses/i2c-brcmstb.c +++ b/drivers/i2c/busses/i2c-brcmstb.c @@ -228,7 +228,7 @@ static irqreturn_t brcmstb_i2c_isr(int irq, void *devid) return IRQ_NONE; brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE); - complete_all(&dev->done); + complete(&dev->done); dev_dbg(dev->device, "isr handled"); return IRQ_HANDLED; -- cgit v1.2.3 From 0268263f0cf2239eb3a747936d8d36ef5f5e1688 Mon Sep 17 00:00:00 2001 From: Daniel Wagner Date: Wed, 3 Aug 2016 14:03:11 +0200 Subject: i2c: meson: Use complete() instead of complete_all() There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The usage pattern of the completion is: meson_i2c_xfer_msg() reinit_completion() ... /* Start the transfer */ ... wait_for_completion_timeout() Signed-off-by: Daniel Wagner Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-meson.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c index 71d3929adf54..76e28980904f 100644 --- a/drivers/i2c/busses/i2c-meson.c +++ b/drivers/i2c/busses/i2c-meson.c @@ -211,7 +211,7 @@ static void meson_i2c_stop(struct meson_i2c *i2c) meson_i2c_add_token(i2c, TOKEN_STOP); } else { i2c->state = STATE_IDLE; - complete_all(&i2c->done); + complete(&i2c->done); } } @@ -238,7 +238,7 @@ static irqreturn_t meson_i2c_irq(int irqno, void *dev_id) dev_dbg(i2c->dev, "error bit set\n"); i2c->error = -ENXIO; i2c->state = STATE_IDLE; - complete_all(&i2c->done); + complete(&i2c->done); goto out; } @@ -269,7 +269,7 @@ static irqreturn_t meson_i2c_irq(int irqno, void *dev_id) break; case STATE_STOP: i2c->state = STATE_IDLE; - complete_all(&i2c->done); + complete(&i2c->done); break; case STATE_IDLE: break; -- cgit v1.2.3 From 52012619e5a2ca0491426c3712fb9054692d4a3c Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 14 Aug 2016 23:44:21 +0300 Subject: ringtest: test build fix Recent changes to ptr_ring broke the ringtest which lacks a likely() stub. Fix it up. Fixes: 982fb490c298896d15e9323a882f34a57c11ff56 ("ptr_ring: support zero length ring") Signed-off-by: Michael S. Tsirkin --- tools/virtio/ringtest/ptr_ring.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/virtio/ringtest/ptr_ring.c b/tools/virtio/ringtest/ptr_ring.c index 68e4f9f0da3a..bd2ad1d3b7a9 100644 --- a/tools/virtio/ringtest/ptr_ring.c +++ b/tools/virtio/ringtest/ptr_ring.c @@ -13,6 +13,7 @@ #define cache_line_size() SMP_CACHE_BYTES #define ____cacheline_aligned_in_smp __attribute__ ((aligned (SMP_CACHE_BYTES))) #define unlikely(x) (__builtin_expect(!!(x), 0)) +#define likely(x) (__builtin_expect(!!(x), 1)) #define ALIGN(x, a) (((x) + (a) - 1) / (a) * (a)) typedef pthread_spinlock_t spinlock_t; -- cgit v1.2.3 From 21bc54fc0cdc31de72b57d2b3c79cf9c2b83cf39 Mon Sep 17 00:00:00 2001 From: Gerard Garcia Date: Wed, 10 Aug 2016 17:24:34 +0200 Subject: vhost/vsock: drop space available check for TX vq Remove unnecessary use of enable/disable callback notifications and the incorrect more space available check. The virtio_transport_tx_work handles when the TX virtqueue has more buffers available. Signed-off-by: Gerard Garcia Acked-by: Stefan Hajnoczi Signed-off-by: Michael S. Tsirkin --- net/vmw_vsock/virtio_transport.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c index 699dfabdbccd..936d7eee62d0 100644 --- a/net/vmw_vsock/virtio_transport.c +++ b/net/vmw_vsock/virtio_transport.c @@ -87,9 +87,6 @@ virtio_transport_send_pkt_work(struct work_struct *work) vq = vsock->vqs[VSOCK_VQ_TX]; - /* Avoid unnecessary interrupts while we're processing the ring */ - virtqueue_disable_cb(vq); - for (;;) { struct virtio_vsock_pkt *pkt; struct scatterlist hdr, buf, *sgs[2]; @@ -99,7 +96,6 @@ virtio_transport_send_pkt_work(struct work_struct *work) spin_lock_bh(&vsock->send_pkt_list_lock); if (list_empty(&vsock->send_pkt_list)) { spin_unlock_bh(&vsock->send_pkt_list_lock); - virtqueue_enable_cb(vq); break; } @@ -118,13 +114,13 @@ virtio_transport_send_pkt_work(struct work_struct *work) } ret = virtqueue_add_sgs(vq, sgs, out_sg, in_sg, pkt, GFP_KERNEL); + /* Usually this means that there is no more space available in + * the vq + */ if (ret < 0) { spin_lock_bh(&vsock->send_pkt_list_lock); list_add(&pkt->list, &vsock->send_pkt_list); spin_unlock_bh(&vsock->send_pkt_list_lock); - - if (!virtqueue_enable_cb(vq) && ret == -ENOSPC) - continue; /* retry now that we have more space */ break; } -- cgit v1.2.3 From 446374d7c7f89603d8151b56824e2cac85ed8e0d Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 15 Aug 2016 04:28:12 +0300 Subject: vhost/test: fix after swiotlb changes Signed-off-by: Michael S. Tsirkin --- drivers/vhost/test.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/vhost/test.c b/drivers/vhost/test.c index 388eec4e1a90..97fb2f8fa930 100644 --- a/drivers/vhost/test.c +++ b/drivers/vhost/test.c @@ -220,20 +220,20 @@ static long vhost_test_reset_owner(struct vhost_test *n) { void *priv = NULL; long err; - struct vhost_memory *memory; + struct vhost_umem *umem; mutex_lock(&n->dev.mutex); err = vhost_dev_check_owner(&n->dev); if (err) goto done; - memory = vhost_dev_reset_owner_prepare(); - if (!memory) { + umem = vhost_dev_reset_owner_prepare(); + if (!umem) { err = -ENOMEM; goto done; } vhost_test_stop(n, &priv); vhost_test_flush(n); - vhost_dev_reset_owner(&n->dev, memory); + vhost_dev_reset_owner(&n->dev, umem); done: mutex_unlock(&n->dev.mutex); return err; -- cgit v1.2.3 From 6be3ffaa0e15c64f560904b025f5c50bef5886f9 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 15 Aug 2016 04:50:55 +0300 Subject: tools/virtio: add dma stubs Fixes build after recent IOMMU-related changes, mustly by adding more stubs. Signed-off-by: Michael S. Tsirkin --- tools/virtio/linux/dma-mapping.h | 16 ++++++++++++++++ tools/virtio/linux/kernel.h | 14 ++++++++++++++ tools/virtio/linux/slab.h | 4 ++++ tools/virtio/linux/virtio.h | 6 +++++- tools/virtio/linux/virtio_config.h | 13 +++++++++++++ 5 files changed, 52 insertions(+), 1 deletion(-) diff --git a/tools/virtio/linux/dma-mapping.h b/tools/virtio/linux/dma-mapping.h index 4f93af89ae16..18601f6689b9 100644 --- a/tools/virtio/linux/dma-mapping.h +++ b/tools/virtio/linux/dma-mapping.h @@ -14,4 +14,20 @@ enum dma_data_direction { DMA_NONE = 3, }; +#define dma_alloc_coherent(d, s, hp, f) ({ \ + void *__dma_alloc_coherent_p = kmalloc((s), (f)); \ + *(hp) = (unsigned long)__dma_alloc_coherent_p; \ + __dma_alloc_coherent_p; \ +}) + +#define dma_free_coherent(d, s, p, h) kfree(p) + +#define dma_map_page(d, p, o, s, dir) (page_to_phys(p) + (o)) + +#define dma_map_single(d, p, s, dir) (virt_to_phys(p)) +#define dma_mapping_error(...) (0) + +#define dma_unmap_single(...) do { } while (0) +#define dma_unmap_page(...) do { } while (0) + #endif diff --git a/tools/virtio/linux/kernel.h b/tools/virtio/linux/kernel.h index 033849948215..d9554fc3f340 100644 --- a/tools/virtio/linux/kernel.h +++ b/tools/virtio/linux/kernel.h @@ -20,7 +20,9 @@ #define PAGE_SIZE getpagesize() #define PAGE_MASK (~(PAGE_SIZE-1)) +#define PAGE_ALIGN(x) ((x + PAGE_SIZE - 1) & PAGE_MASK) +typedef unsigned long long phys_addr_t; typedef unsigned long long dma_addr_t; typedef size_t __kernel_size_t; typedef unsigned int __wsum; @@ -57,6 +59,11 @@ static inline void *kzalloc(size_t s, gfp_t gfp) return p; } +static inline void *alloc_pages_exact(size_t s, gfp_t gfp) +{ + return kmalloc(s, gfp); +} + static inline void kfree(void *p) { if (p >= __kfree_ignore_start && p < __kfree_ignore_end) @@ -64,6 +71,11 @@ static inline void kfree(void *p) free(p); } +static inline void free_pages_exact(void *p, size_t s) +{ + kfree(p); +} + static inline void *krealloc(void *p, size_t s, gfp_t gfp) { return realloc(p, s); @@ -105,6 +117,8 @@ static inline void free_page(unsigned long addr) #define dev_err(dev, format, ...) fprintf (stderr, format, ## __VA_ARGS__) #define dev_warn(dev, format, ...) fprintf (stderr, format, ## __VA_ARGS__) +#define WARN_ON_ONCE(cond) ((cond) && fprintf (stderr, "WARNING\n")) + #define min(x, y) ({ \ typeof(x) _min1 = (x); \ typeof(y) _min2 = (y); \ diff --git a/tools/virtio/linux/slab.h b/tools/virtio/linux/slab.h index 81baeac8ae40..7e1c1197d439 100644 --- a/tools/virtio/linux/slab.h +++ b/tools/virtio/linux/slab.h @@ -1,2 +1,6 @@ #ifndef LINUX_SLAB_H +#define GFP_KERNEL 0 +#define GFP_ATOMIC 0 +#define __GFP_NOWARN 0 +#define __GFP_ZERO 0 #endif diff --git a/tools/virtio/linux/virtio.h b/tools/virtio/linux/virtio.h index ee125e714053..9377c8b4ac16 100644 --- a/tools/virtio/linux/virtio.h +++ b/tools/virtio/linux/virtio.h @@ -3,8 +3,12 @@ #include #include +struct device { + void *parent; +}; + struct virtio_device { - void *dev; + struct device dev; u64 features; }; diff --git a/tools/virtio/linux/virtio_config.h b/tools/virtio/linux/virtio_config.h index 57a6964a1e35..9ba11815e0a1 100644 --- a/tools/virtio/linux/virtio_config.h +++ b/tools/virtio/linux/virtio_config.h @@ -40,6 +40,19 @@ static inline void __virtio_clear_bit(struct virtio_device *vdev, #define virtio_has_feature(dev, feature) \ (__virtio_test_bit((dev), feature)) +/** + * virtio_has_iommu_quirk - determine whether this device has the iommu quirk + * @vdev: the device + */ +static inline bool virtio_has_iommu_quirk(const struct virtio_device *vdev) +{ + /* + * Note the reverse polarity of the quirk feature (compared to most + * other features), this is for compatibility with legacy systems. + */ + return !virtio_has_feature(vdev, VIRTIO_F_IOMMU_PLATFORM); +} + static inline bool virtio_is_little_endian(struct virtio_device *vdev) { return virtio_has_feature(vdev, VIRTIO_F_VERSION_1) || -- cgit v1.2.3 From 1c8d477a77e2d1d3504419e7f2e02e6422becf9a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sun, 14 Aug 2016 12:47:49 -0400 Subject: pNFS/flexfiles: Fix layoutstat periodic reporting Putting the periodicity timer in the mirror instances is causing non-scalable reporting behaviour and missed reporting intervals. When you recall layouts and/or implement client side mirroring, it leads to consecutive reports with only a few ms between RPC calls. Signed-off-by: Trond Myklebust Fixes: d0379a5d066a9 ("pNFS/flexfiles: Support server-supplied...") --- fs/nfs/flexfilelayout/flexfilelayout.c | 8 ++++---- fs/nfs/flexfilelayout/flexfilelayout.h | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/nfs/flexfilelayout/flexfilelayout.c b/fs/nfs/flexfilelayout/flexfilelayout.c index e6206eaf2bdf..ee1c94c7614c 100644 --- a/fs/nfs/flexfilelayout/flexfilelayout.c +++ b/fs/nfs/flexfilelayout/flexfilelayout.c @@ -37,6 +37,7 @@ ff_layout_alloc_layout_hdr(struct inode *inode, gfp_t gfp_flags) if (ffl) { INIT_LIST_HEAD(&ffl->error_list); INIT_LIST_HEAD(&ffl->mirrors); + ffl->last_report_time = ktime_get(); return &ffl->generic_hdr; } else return NULL; @@ -640,19 +641,18 @@ nfs4_ff_layoutstat_start_io(struct nfs4_ff_layout_mirror *mirror, { static const ktime_t notime = {0}; s64 report_interval = FF_LAYOUTSTATS_REPORT_INTERVAL; + struct nfs4_flexfile_layout *ffl = FF_LAYOUT_FROM_HDR(mirror->layout); nfs4_ff_start_busy_timer(&layoutstat->busy_timer, now); if (ktime_equal(mirror->start_time, notime)) mirror->start_time = now; - if (ktime_equal(mirror->last_report_time, notime)) - mirror->last_report_time = now; if (mirror->report_interval != 0) report_interval = (s64)mirror->report_interval * 1000LL; else if (layoutstats_timer != 0) report_interval = (s64)layoutstats_timer * 1000LL; - if (ktime_to_ms(ktime_sub(now, mirror->last_report_time)) >= + if (ktime_to_ms(ktime_sub(now, ffl->last_report_time)) >= report_interval) { - mirror->last_report_time = now; + ffl->last_report_time = now; return true; } diff --git a/fs/nfs/flexfilelayout/flexfilelayout.h b/fs/nfs/flexfilelayout/flexfilelayout.h index 1bcdb15d0c41..3ee0c9fcea76 100644 --- a/fs/nfs/flexfilelayout/flexfilelayout.h +++ b/fs/nfs/flexfilelayout/flexfilelayout.h @@ -84,7 +84,6 @@ struct nfs4_ff_layout_mirror { struct nfs4_ff_layoutstat read_stat; struct nfs4_ff_layoutstat write_stat; ktime_t start_time; - ktime_t last_report_time; u32 report_interval; }; @@ -101,6 +100,7 @@ struct nfs4_flexfile_layout { struct pnfs_ds_commit_info commit_info; struct list_head mirrors; struct list_head error_list; /* nfs4_ff_layout_ds_err */ + ktime_t last_report_time; /* Layoutstat report times */ }; static inline struct nfs4_flexfile_layout * -- cgit v1.2.3 From 4cf0b354d92ee2c642532ee39e330f8f580fd985 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 12 Aug 2016 12:03:52 +0200 Subject: rhashtable: avoid large lock-array allocations Sander reports following splat after netfilter nat bysrc table got converted to rhashtable: swapper/0: page allocation failure: order:3, mode:0x2084020(GFP_ATOMIC|__GFP_COMP) CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc1 [..] [] warn_alloc_failed+0xdd/0x140 [] __alloc_pages_nodemask+0x3e1/0xcf0 [] alloc_pages_current+0x8d/0x110 [] kmalloc_order+0x1f/0x70 [] __kmalloc+0x129/0x140 [] bucket_table_alloc+0xc1/0x1d0 [] rhashtable_insert_rehash+0x5d/0xe0 [] nf_nat_setup_info+0x2ef/0x400 The failure happens when allocating the spinlock array. Even with GFP_KERNEL its unlikely for such a large allocation to succeed. Thomas Graf pointed me at inet_ehash_locks_alloc(), so in addition to adding NOWARN for atomic allocations this also makes the bucket-array sizing more conservative. In commit 095dc8e0c3686 ("tcp: fix/cleanup inet_ehash_locks_alloc()"), Eric Dumazet says: "Budget 2 cache lines per cpu worth of 'spinlocks'". IOW, consider size needed by a single spinlock when determining number of locks per cpu. So with 64 byte per cacheline and 4 byte per spinlock this gives 32 locks per cpu. Resulting size of the lock-array (sizeof(spinlock) == 4): cpus: 1 2 4 8 16 32 64 old: 1k 1k 4k 8k 16k 16k 16k new: 128 256 512 1k 2k 4k 8k 8k allocation should have decent chance of success even with GFP_ATOMIC, and should not fail with GFP_KERNEL. With 72-byte spinlock (LOCKDEP): cpus : 1 2 old: 9k 18k new: ~2k ~4k Reported-by: Sander Eikelenboom Suggested-by: Thomas Graf Signed-off-by: Florian Westphal Signed-off-by: David S. Miller --- lib/rhashtable.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/lib/rhashtable.c b/lib/rhashtable.c index 5d845ffd7982..42acd81f10db 100644 --- a/lib/rhashtable.c +++ b/lib/rhashtable.c @@ -30,7 +30,7 @@ #define HASH_DEFAULT_SIZE 64UL #define HASH_MIN_SIZE 4U -#define BUCKET_LOCKS_PER_CPU 128UL +#define BUCKET_LOCKS_PER_CPU 32UL static u32 head_hashfn(struct rhashtable *ht, const struct bucket_table *tbl, @@ -70,7 +70,7 @@ static int alloc_bucket_locks(struct rhashtable *ht, struct bucket_table *tbl, unsigned int nr_pcpus = num_possible_cpus(); #endif - nr_pcpus = min_t(unsigned int, nr_pcpus, 32UL); + nr_pcpus = min_t(unsigned int, nr_pcpus, 64UL); size = roundup_pow_of_two(nr_pcpus * ht->p.locks_mul); /* Never allocate more than 0.5 locks per bucket */ @@ -83,6 +83,9 @@ static int alloc_bucket_locks(struct rhashtable *ht, struct bucket_table *tbl, tbl->locks = vmalloc(size * sizeof(spinlock_t)); else #endif + if (gfp != GFP_KERNEL) + gfp |= __GFP_NOWARN | __GFP_NORETRY; + tbl->locks = kmalloc_array(size, sizeof(spinlock_t), gfp); if (!tbl->locks) -- cgit v1.2.3 From eb8fc32354aa77678dc6e7950a8f0c79cace204f Mon Sep 17 00:00:00 2001 From: Vincent Date: Sun, 14 Aug 2016 15:38:29 +0200 Subject: mlxsw: spectrum_router: Fix use after free MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In mlxsw_sp_router_fib4_add_info_destroy(), the fib_entry pointer is used after it has been freed by mlxsw_sp_fib_entry_destroy(). Use a temporary variable to fix this. Fixes: 61c503f976b5449e ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops") Signed-off-by: Vincent Stehlé Cc: Jiri Pirko Acked-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 81418d629231..90bb93b037ec 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -1651,9 +1651,10 @@ static void mlxsw_sp_router_fib4_add_info_destroy(void const *data) const struct mlxsw_sp_router_fib4_add_info *info = data; struct mlxsw_sp_fib_entry *fib_entry = info->fib_entry; struct mlxsw_sp *mlxsw_sp = info->mlxsw_sp; + struct mlxsw_sp_vr *vr = fib_entry->vr; mlxsw_sp_fib_entry_destroy(fib_entry); - mlxsw_sp_vr_put(mlxsw_sp, fib_entry->vr); + mlxsw_sp_vr_put(mlxsw_sp, vr); kfree(info); } -- cgit v1.2.3 From 5a5a1d614287a647b36dff3f40c2b0ceabbc83ec Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Fri, 12 Aug 2016 01:05:08 +0300 Subject: USB: serial: mos7720: fix non-atomic allocation in write path There is an allocation with GFP_KERNEL flag in mos7720_write(), while it may be called from interrupt context. Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic allocation in write path") Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/mos7720.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 5608af4a369d..de9992b492b0 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1252,7 +1252,7 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, if (urb->transfer_buffer == NULL) { urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, - GFP_KERNEL); + GFP_ATOMIC); if (!urb->transfer_buffer) goto exit; } -- cgit v1.2.3 From 3b7c7e52efda0d4640060de747768360ba70a7c0 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Fri, 12 Aug 2016 01:05:09 +0300 Subject: USB: serial: mos7840: fix non-atomic allocation in write path There is an allocation with GFP_KERNEL flag in mos7840_write(), while it may be called from interrupt context. Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic allocation in write path") Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/mos7840.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index ed378fb232e7..57426d703a09 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1340,8 +1340,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, } if (urb->transfer_buffer == NULL) { - urb->transfer_buffer = - kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); + urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, + GFP_ATOMIC); if (!urb->transfer_buffer) goto exit; } -- cgit v1.2.3 From d9853490176c88fff71d03ec9a174b77011f5026 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Thu, 28 Jul 2016 11:50:48 +0200 Subject: drm/etnaviv: take GPU lock later in the submit process Both the fence and event alloc are safe to be done without holding the GPU lock, as they either don't need any locking (fences) or are protected by their own lock (events). This solves a bad locking interaction between the submit path and the recover worker. If userspace manages to exhaust all available events while the GPU is hung, the submit will wait for events to become available holding the GPU lock. The recover worker waits for this lock to become available before trying to recover the GPU which frees up the allocated events. Essentially both paths are deadlocked until the submit path times out waiting for available events, failing the submit that could otherwise be handled just fine if the recover worker had the chance to bring the GPU back in a working state. Signed-off-by: Lucas Stach Reviewed-by: Christian Gmeiner --- drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c index 87ef34150d46..b382cf505262 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c @@ -1333,8 +1333,6 @@ int etnaviv_gpu_submit(struct etnaviv_gpu *gpu, if (ret < 0) return ret; - mutex_lock(&gpu->lock); - /* * TODO * @@ -1348,16 +1346,18 @@ int etnaviv_gpu_submit(struct etnaviv_gpu *gpu, if (unlikely(event == ~0U)) { DRM_ERROR("no free event\n"); ret = -EBUSY; - goto out_unlock; + goto out_pm_put; } fence = etnaviv_gpu_fence_alloc(gpu); if (!fence) { event_free(gpu, event); ret = -ENOMEM; - goto out_unlock; + goto out_pm_put; } + mutex_lock(&gpu->lock); + gpu->event[event].fence = fence; submit->fence = fence->seqno; gpu->active_fence = submit->fence; @@ -1395,9 +1395,9 @@ int etnaviv_gpu_submit(struct etnaviv_gpu *gpu, hangcheck_timer_reset(gpu); ret = 0; -out_unlock: mutex_unlock(&gpu->lock); +out_pm_put: etnaviv_gpu_pm_put(gpu); return ret; -- cgit v1.2.3 From 802934b2cfde463b72cc1b9bc1c081895a90be53 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Fri, 5 Aug 2016 12:29:06 -0400 Subject: dm round robin: do not use this_cpu_ptr() without having preemption disabled Use local_irq_save() to disable preemption before calling this_cpu_ptr(). Reported-by: Benjamin Block Fixes: b0b477c7e0dd ("dm round robin: use percpu 'repeat_count' and 'current_path'") Cc: stable@vger.kernel.org # 4.6+ Suggested-by: Jens Axboe Signed-off-by: Mike Snitzer --- drivers/md/dm-round-robin.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-round-robin.c b/drivers/md/dm-round-robin.c index 4ace1da17db8..6c25213ab38c 100644 --- a/drivers/md/dm-round-robin.c +++ b/drivers/md/dm-round-robin.c @@ -210,14 +210,17 @@ static struct dm_path *rr_select_path(struct path_selector *ps, size_t nr_bytes) struct path_info *pi = NULL; struct dm_path *current_path = NULL; + local_irq_save(flags); current_path = *this_cpu_ptr(s->current_path); if (current_path) { percpu_counter_dec(&s->repeat_count); - if (percpu_counter_read_positive(&s->repeat_count) > 0) + if (percpu_counter_read_positive(&s->repeat_count) > 0) { + local_irq_restore(flags); return current_path; + } } - spin_lock_irqsave(&s->lock, flags); + spin_lock(&s->lock); if (!list_empty(&s->valid_paths)) { pi = list_entry(s->valid_paths.next, struct path_info, list); list_move_tail(&pi->list, &s->valid_paths); -- cgit v1.2.3 From 0a83df6c8cacafbefc5b56b2fbcb92b0d75b744b Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 15 Jul 2016 17:30:20 -0400 Subject: dm crypt: increase mempool reserve to better support swapping Increase mempool size from 16 to 64 entries. This increase improves swap on dm-crypt performance. When swapping to dm-crypt, all available memory is temporarily exhausted and dm-crypt can only use the mempool reserve. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- drivers/md/dm-crypt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 4e9784b4e0ac..eedba67b0e3e 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -181,7 +181,7 @@ struct crypt_config { u8 key[0]; }; -#define MIN_IOS 16 +#define MIN_IOS 64 static void clone_init(struct dm_crypt_io *, struct bio *); static void kcryptd_queue_crypt(struct dm_crypt_io *io); -- cgit v1.2.3 From 7ef9153d9af5fe7ce32dcc0f558bfcfc3d2b3016 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 15 Aug 2016 15:17:41 +0200 Subject: misc: delete bh1780 driver The Rohm BH1780 ambient light sensor has a new driver with extended functionality (proper runtime PM) in the appropriate framework IIO, it can be found at: drivers/iio/light/bh1780.c The MISC driver symbol CONFIG_SENSORS_BH1780 does not appear in any defconfigs, so it should safe to delete. Cc: Hemanth V Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman --- drivers/misc/Kconfig | 10 -- drivers/misc/Makefile | 1 - drivers/misc/bh1780gli.c | 259 ----------------------------------------------- 3 files changed, 270 deletions(-) delete mode 100644 drivers/misc/bh1780gli.c diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index a216b4667742..d00252828966 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -345,16 +345,6 @@ config SENSORS_TSL2550 This driver can also be built as a module. If so, the module will be called tsl2550. -config SENSORS_BH1780 - tristate "ROHM BH1780GLI ambient light sensor" - depends on I2C && SYSFS - help - If you say yes here you get support for the ROHM BH1780GLI - ambient light sensor. - - This driver can also be built as a module. If so, the module - will be called bh1780gli. - config SENSORS_BH1770 tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor" depends on I2C diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 7410c6d9a34d..fb32516ddfe2 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o -obj-$(CONFIG_SENSORS_BH1780) += bh1780gli.o obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o obj-$(CONFIG_SENSORS_APDS990X) += apds990x.o obj-$(CONFIG_SGI_IOC4) += ioc4.o diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c deleted file mode 100644 index 7f90ce5a569a..000000000000 --- a/drivers/misc/bh1780gli.c +++ /dev/null @@ -1,259 +0,0 @@ -/* - * bh1780gli.c - * ROHM Ambient Light Sensor Driver - * - * Copyright (C) 2010 Texas Instruments - * Author: Hemanth V - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see . - */ -#include -#include -#include -#include -#include -#include -#include - -#define BH1780_REG_CONTROL 0x80 -#define BH1780_REG_PARTID 0x8A -#define BH1780_REG_MANFID 0x8B -#define BH1780_REG_DLOW 0x8C -#define BH1780_REG_DHIGH 0x8D - -#define BH1780_REVMASK (0xf) -#define BH1780_POWMASK (0x3) -#define BH1780_POFF (0x0) -#define BH1780_PON (0x3) - -/* power on settling time in ms */ -#define BH1780_PON_DELAY 2 - -struct bh1780_data { - struct i2c_client *client; - int power_state; - /* lock for sysfs operations */ - struct mutex lock; -}; - -static int bh1780_write(struct bh1780_data *ddata, u8 reg, u8 val, char *msg) -{ - int ret = i2c_smbus_write_byte_data(ddata->client, reg, val); - if (ret < 0) - dev_err(&ddata->client->dev, - "i2c_smbus_write_byte_data failed error %d Register (%s)\n", - ret, msg); - return ret; -} - -static int bh1780_read(struct bh1780_data *ddata, u8 reg, char *msg) -{ - int ret = i2c_smbus_read_byte_data(ddata->client, reg); - if (ret < 0) - dev_err(&ddata->client->dev, - "i2c_smbus_read_byte_data failed error %d Register (%s)\n", - ret, msg); - return ret; -} - -static ssize_t bh1780_show_lux(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct platform_device *pdev = to_platform_device(dev); - struct bh1780_data *ddata = platform_get_drvdata(pdev); - int lsb, msb; - - lsb = bh1780_read(ddata, BH1780_REG_DLOW, "DLOW"); - if (lsb < 0) - return lsb; - - msb = bh1780_read(ddata, BH1780_REG_DHIGH, "DHIGH"); - if (msb < 0) - return msb; - - return sprintf(buf, "%d\n", (msb << 8) | lsb); -} - -static ssize_t bh1780_show_power_state(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct platform_device *pdev = to_platform_device(dev); - struct bh1780_data *ddata = platform_get_drvdata(pdev); - int state; - - state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL"); - if (state < 0) - return state; - - return sprintf(buf, "%d\n", state & BH1780_POWMASK); -} - -static ssize_t bh1780_store_power_state(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct platform_device *pdev = to_platform_device(dev); - struct bh1780_data *ddata = platform_get_drvdata(pdev); - unsigned long val; - int error; - - error = kstrtoul(buf, 0, &val); - if (error) - return error; - - if (val < BH1780_POFF || val > BH1780_PON) - return -EINVAL; - - mutex_lock(&ddata->lock); - - error = bh1780_write(ddata, BH1780_REG_CONTROL, val, "CONTROL"); - if (error < 0) { - mutex_unlock(&ddata->lock); - return error; - } - - msleep(BH1780_PON_DELAY); - ddata->power_state = val; - mutex_unlock(&ddata->lock); - - return count; -} - -static DEVICE_ATTR(lux, S_IRUGO, bh1780_show_lux, NULL); - -static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO, - bh1780_show_power_state, bh1780_store_power_state); - -static struct attribute *bh1780_attributes[] = { - &dev_attr_power_state.attr, - &dev_attr_lux.attr, - NULL -}; - -static const struct attribute_group bh1780_attr_group = { - .attrs = bh1780_attributes, -}; - -static int bh1780_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - int ret; - struct bh1780_data *ddata; - struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) - return -EIO; - - ddata = devm_kzalloc(&client->dev, sizeof(struct bh1780_data), - GFP_KERNEL); - if (ddata == NULL) - return -ENOMEM; - - ddata->client = client; - i2c_set_clientdata(client, ddata); - - ret = bh1780_read(ddata, BH1780_REG_PARTID, "PART ID"); - if (ret < 0) - return ret; - - dev_info(&client->dev, "Ambient Light Sensor, Rev : %d\n", - (ret & BH1780_REVMASK)); - - mutex_init(&ddata->lock); - - return sysfs_create_group(&client->dev.kobj, &bh1780_attr_group); -} - -static int bh1780_remove(struct i2c_client *client) -{ - sysfs_remove_group(&client->dev.kobj, &bh1780_attr_group); - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int bh1780_suspend(struct device *dev) -{ - struct bh1780_data *ddata; - int state, ret; - struct i2c_client *client = to_i2c_client(dev); - - ddata = i2c_get_clientdata(client); - state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL"); - if (state < 0) - return state; - - ddata->power_state = state & BH1780_POWMASK; - - ret = bh1780_write(ddata, BH1780_REG_CONTROL, BH1780_POFF, - "CONTROL"); - - if (ret < 0) - return ret; - - return 0; -} - -static int bh1780_resume(struct device *dev) -{ - struct bh1780_data *ddata; - int state, ret; - struct i2c_client *client = to_i2c_client(dev); - - ddata = i2c_get_clientdata(client); - state = ddata->power_state; - ret = bh1780_write(ddata, BH1780_REG_CONTROL, state, - "CONTROL"); - - if (ret < 0) - return ret; - - return 0; -} -#endif /* CONFIG_PM_SLEEP */ - -static SIMPLE_DEV_PM_OPS(bh1780_pm, bh1780_suspend, bh1780_resume); - -static const struct i2c_device_id bh1780_id[] = { - { "bh1780", 0 }, - { }, -}; - -MODULE_DEVICE_TABLE(i2c, bh1780_id); - -#ifdef CONFIG_OF -static const struct of_device_id of_bh1780_match[] = { - { .compatible = "rohm,bh1780gli", }, - {}, -}; - -MODULE_DEVICE_TABLE(of, of_bh1780_match); -#endif - -static struct i2c_driver bh1780_driver = { - .probe = bh1780_probe, - .remove = bh1780_remove, - .id_table = bh1780_id, - .driver = { - .name = "bh1780", - .pm = &bh1780_pm, - .of_match_table = of_match_ptr(of_bh1780_match), - }, -}; - -module_i2c_driver(bh1780_driver); - -MODULE_DESCRIPTION("BH1780GLI Ambient Light Sensor Driver"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Hemanth V "); -- cgit v1.2.3 From add125054b8727103631dce116361668436ef6a7 Mon Sep 17 00:00:00 2001 From: Gavin Li Date: Fri, 12 Aug 2016 00:52:56 -0700 Subject: cdc-acm: fix wrong pipe type on rx interrupt xfers This fixes the "BOGUS urb xfer" warning logged by usb_submit_urb(). Signed-off-by: Gavin Li Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 5 ++--- drivers/usb/class/cdc-acm.h | 1 - 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 71912301ef7f..0f3f62e81e5b 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1354,7 +1354,6 @@ made_compressed_probe: spin_lock_init(&acm->write_lock); spin_lock_init(&acm->read_lock); mutex_init(&acm->mutex); - acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress); acm->is_int_ep = usb_endpoint_xfer_int(epread); if (acm->is_int_ep) acm->bInterval = epread->bInterval; @@ -1394,14 +1393,14 @@ made_compressed_probe: urb->transfer_dma = rb->dma; if (acm->is_int_ep) { usb_fill_int_urb(urb, acm->dev, - acm->rx_endpoint, + usb_rcvintpipe(usb_dev, epread->bEndpointAddress), rb->base, acm->readsize, acm_read_bulk_callback, rb, acm->bInterval); } else { usb_fill_bulk_urb(urb, acm->dev, - acm->rx_endpoint, + usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress), rb->base, acm->readsize, acm_read_bulk_callback, rb); diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index 05ce308d5d2a..1f1eabfd8462 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -96,7 +96,6 @@ struct acm { struct acm_rb read_buffers[ACM_NR]; struct acm_wb *putbuffer; /* for acm_tty_put_char() */ int rx_buflimit; - int rx_endpoint; spinlock_t read_lock; int write_used; /* number of non-empty write buffers */ int transmitting; -- cgit v1.2.3 From bb9947c3a14e781eb0f137728e7e55ec8d848991 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 14 Jul 2016 11:06:11 +0000 Subject: iio: pressure: bmp280: fix wrong pointer passed to PTR_ERR() PTR_ERR should access the value just tested by IS_ERR, otherwise the wrong error code will be returned. Signed-off-by: Wei Yongjun Reviewed-by: Linus Walleij Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/bmp280-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 6943688e66df..94e27b2600f3 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -970,7 +970,7 @@ int bmp280_common_probe(struct device *dev, data->vdda = devm_regulator_get(dev, "vdda"); if (IS_ERR(data->vdda)) { dev_err(dev, "failed to get VDDA regulator\n"); - ret = PTR_ERR(data->vddd); + ret = PTR_ERR(data->vdda); goto out_disable_vddd; } ret = regulator_enable(data->vdda); -- cgit v1.2.3 From 776b645315d372e06e46167194605d308aa1a790 Mon Sep 17 00:00:00 2001 From: Phil Turnbull Date: Thu, 21 Jul 2016 11:23:13 -0400 Subject: staging: iio: ad5933: Return correct value for AD5933_OUT_RANGE. The 'break' statement after calling ad5933_cmd only breaks out of the 'for' loop, which then unconditionally sets the return value to -EINVAL. Move the initialisation of 'ret' so we return the correct value. Signed-off-by: Phil Turnbull Signed-off-by: Jonathan Cameron --- drivers/staging/iio/impedance-analyzer/ad5933.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c index 170ac980abcb..24c348d2f5bb 100644 --- a/drivers/staging/iio/impedance-analyzer/ad5933.c +++ b/drivers/staging/iio/impedance-analyzer/ad5933.c @@ -419,6 +419,7 @@ static ssize_t ad5933_store(struct device *dev, mutex_lock(&indio_dev->mlock); switch ((u32)this_attr->address) { case AD5933_OUT_RANGE: + ret = -EINVAL; for (i = 0; i < 4; i++) if (val == st->range_avail[i]) { st->ctrl_hb &= ~AD5933_CTRL_RANGE(0x3); @@ -426,7 +427,6 @@ static ssize_t ad5933_store(struct device *dev, ret = ad5933_cmd(st, 0); break; } - ret = -EINVAL; break; case AD5933_IN_PGA_GAIN: if (sysfs_streq(buf, "1")) { -- cgit v1.2.3 From b2f0c09664b72b2f8c581383a9337ac3092e42c8 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 11 Jul 2016 13:50:01 +0200 Subject: iio: sw-trigger: Fix config group initialization Use the IS_ENABLED() helper macro to ensure that the configfs group is initialized either when configfs is built-in or when configfs is built as a module. Otherwise software trigger creation will result in undefined behaviour when configfs is built as a mdoule since the configfs group for the trigger is not properly initialized. Fixes: b662f809d410 ("iio: core: Introduce IIO software triggers") Signed-off-by: Lars-Peter Clausen Acked-by: Daniel Baluta Cc: Signed-off-by: Jonathan Cameron --- include/linux/iio/sw_trigger.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/iio/sw_trigger.h b/include/linux/iio/sw_trigger.h index 5198f8ed08a4..c97eab67558f 100644 --- a/include/linux/iio/sw_trigger.h +++ b/include/linux/iio/sw_trigger.h @@ -62,7 +62,7 @@ void iio_swt_group_init_type_name(struct iio_sw_trigger *t, const char *name, struct config_item_type *type) { -#ifdef CONFIG_CONFIGFS_FS +#if IS_ENABLED(CONFIG_CONFIGFS_FS) config_group_init_type_name(&t->group, name, type); #endif } -- cgit v1.2.3 From 7d3cc21dab5313a02f2f3ca8164529b828a030d1 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 11 Jul 2016 13:54:17 +0200 Subject: iio: ad799x: Fix buffered capture for ad7991/ad7995/ad7999 The data buffer for captured mode for the ad799x driver is allocated in the update_scan_mode() callback. This callback is not set in the iio_info struct for the ad7791/ad7995/ad7999, which means that the data buffer is not allocated when a captured transfer is started. As a result the driver crashes when the first sample is received. To fix this properly set the update_scan_mode() callback. Fixes: d8dca33027c1 ("staging:iio:ad799x: Preallocate sample buffer") Signed-off-by: Lars-Peter Clausen Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad799x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c index b6163764489c..9704090b7908 100644 --- a/drivers/iio/adc/ad799x.c +++ b/drivers/iio/adc/ad799x.c @@ -527,6 +527,7 @@ static struct attribute_group ad799x_event_attrs_group = { static const struct iio_info ad7991_info = { .read_raw = &ad799x_read_raw, .driver_module = THIS_MODULE, + .update_scan_mode = ad799x_update_scan_mode, }; static const struct iio_info ad7993_4_7_8_noirq_info = { -- cgit v1.2.3 From b234f683dde97aebb7009c6aecab651d32ad70b4 Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Mon, 11 Jul 2016 08:25:07 -0700 Subject: iio: accel: bma220_spi: set up buffer timestamps for non-zero values Use the iio_pollfunc_store_time parameter during triggered buffer set-up to get valid timestamps. Signed-off-by: Alison Schofield Cc: Daniel Baluta Reviewed-By: Tiberiu Breana Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/bma220_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/accel/bma220_spi.c b/drivers/iio/accel/bma220_spi.c index 1098d10df8e8..5099f295dd37 100644 --- a/drivers/iio/accel/bma220_spi.c +++ b/drivers/iio/accel/bma220_spi.c @@ -253,7 +253,7 @@ static int bma220_probe(struct spi_device *spi) if (ret < 0) return ret; - ret = iio_triggered_buffer_setup(indio_dev, NULL, + ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time, bma220_trigger_handler, NULL); if (ret < 0) { dev_err(&spi->dev, "iio triggered buffer setup failed\n"); -- cgit v1.2.3 From 3c68858df7c2f0c4c343bb4702733fe827491f9e Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Mon, 11 Jul 2016 08:26:13 -0700 Subject: iio: humidity: am2315: set up buffer timestamps for non-zero values Use the iio_pollfunc_store_time parameter during triggered buffer set-up to get valid timestamps. Signed-off-by: Alison Schofield Cc: Daniel Baluta Reviewed-By: Tiberiu Breana Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/am2315.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/humidity/am2315.c b/drivers/iio/humidity/am2315.c index 3e200f69e886..ff96b6d0fdae 100644 --- a/drivers/iio/humidity/am2315.c +++ b/drivers/iio/humidity/am2315.c @@ -244,7 +244,7 @@ static int am2315_probe(struct i2c_client *client, indio_dev->channels = am2315_channels; indio_dev->num_channels = ARRAY_SIZE(am2315_channels); - ret = iio_triggered_buffer_setup(indio_dev, NULL, + ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time, am2315_trigger_handler, NULL); if (ret < 0) { dev_err(&client->dev, "iio triggered buffer setup failed\n"); -- cgit v1.2.3 From f8adf645db03345af2d9a8b6095b02327ea50885 Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Mon, 11 Jul 2016 08:26:56 -0700 Subject: iio: proximity: as3935: set up buffer timestamps for non-zero values Use the iio_pollfunc_store_time parameter during triggered buffer set-up to get valid timestamps. Signed-off-by: Alison Schofield Cc: Daniel Baluta Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/proximity/as3935.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c index 2e3a70e1b245..5656deb17261 100644 --- a/drivers/iio/proximity/as3935.c +++ b/drivers/iio/proximity/as3935.c @@ -397,7 +397,7 @@ static int as3935_probe(struct spi_device *spi) return ret; } - ret = iio_triggered_buffer_setup(indio_dev, NULL, + ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time, &as3935_trigger_handler, NULL); if (ret) { -- cgit v1.2.3 From 45e98152850c36560484f3fa3bb857a4bfe1a419 Mon Sep 17 00:00:00 2001 From: William Breathitt Gray Date: Tue, 19 Jul 2016 12:25:00 -0400 Subject: iio: stx104: Unregister IIO device on remove callback The devm_iio_device_register function should not be used if custom operations must be performed in the remove callback. This patch replaces the dem_iio_device_register call with a iio_device_register call and respective iio_device_unregister call in the remove callback. Fixes: 765550e4d98d ("iio: stx104: Add GPIO support for the Apex Embedded Systems STX104") Signed-off-by: William Breathitt Gray Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/dac/stx104.c | 38 +++++++++++++++++++++++++++++--------- 1 file changed, 29 insertions(+), 9 deletions(-) diff --git a/drivers/iio/dac/stx104.c b/drivers/iio/dac/stx104.c index 792a97164cb2..bebbd00304ce 100644 --- a/drivers/iio/dac/stx104.c +++ b/drivers/iio/dac/stx104.c @@ -65,6 +65,16 @@ struct stx104_gpio { unsigned int out_state; }; +/** + * struct stx104_dev - STX104 device private data structure + * @indio_dev: IIO device + * @chip: instance of the gpio_chip + */ +struct stx104_dev { + struct iio_dev *indio_dev; + struct gpio_chip *chip; +}; + static int stx104_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { @@ -107,6 +117,7 @@ static const struct iio_chan_spec stx104_channels[STX104_NUM_CHAN] = { static int stx104_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) { + /* GPIO 0-3 are input only, while the rest are output only */ if (offset < 4) return 1; @@ -169,6 +180,7 @@ static int stx104_probe(struct device *dev, unsigned int id) struct iio_dev *indio_dev; struct stx104_iio *priv; struct stx104_gpio *stx104gpio; + struct stx104_dev *stx104dev; int err; indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); @@ -179,6 +191,10 @@ static int stx104_probe(struct device *dev, unsigned int id) if (!stx104gpio) return -ENOMEM; + stx104dev = devm_kzalloc(dev, sizeof(*stx104dev), GFP_KERNEL); + if (!stx104dev) + return -ENOMEM; + if (!devm_request_region(dev, base[id], STX104_EXTENT, dev_name(dev))) { dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", @@ -199,12 +215,6 @@ static int stx104_probe(struct device *dev, unsigned int id) outw(0, base[id] + 4); outw(0, base[id] + 6); - err = devm_iio_device_register(dev, indio_dev); - if (err) { - dev_err(dev, "IIO device registering failed (%d)\n", err); - return err; - } - stx104gpio->chip.label = dev_name(dev); stx104gpio->chip.parent = dev; stx104gpio->chip.owner = THIS_MODULE; @@ -220,7 +230,9 @@ static int stx104_probe(struct device *dev, unsigned int id) spin_lock_init(&stx104gpio->lock); - dev_set_drvdata(dev, stx104gpio); + stx104dev->indio_dev = indio_dev; + stx104dev->chip = &stx104gpio->chip; + dev_set_drvdata(dev, stx104dev); err = gpiochip_add_data(&stx104gpio->chip, stx104gpio); if (err) { @@ -228,14 +240,22 @@ static int stx104_probe(struct device *dev, unsigned int id) return err; } + err = iio_device_register(indio_dev); + if (err) { + dev_err(dev, "IIO device registering failed (%d)\n", err); + gpiochip_remove(&stx104gpio->chip); + return err; + } + return 0; } static int stx104_remove(struct device *dev, unsigned int id) { - struct stx104_gpio *const stx104gpio = dev_get_drvdata(dev); + struct stx104_dev *const stx104dev = dev_get_drvdata(dev); - gpiochip_remove(&stx104gpio->chip); + iio_device_unregister(stx104dev->indio_dev); + gpiochip_remove(stx104dev->chip); return 0; } -- cgit v1.2.3 From 193e2d4fd91c5e5d563395f9577621dac4f4df31 Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Mon, 18 Jul 2016 17:56:43 -0700 Subject: iio: add Kconfig selects needed for triggered buffer compiles Select IIO_BUFFER and IIO_TRIGGERED_BUFFER to compile. Remove IIO_TRIGGER if present since IIO_BUFFER selects it. Signed-off-by: Alison Schofield Cc: Daniel Baluta Signed-off-by: Jonathan Cameron --- drivers/iio/accel/Kconfig | 5 ++++- drivers/iio/humidity/Kconfig | 2 ++ drivers/iio/light/Kconfig | 2 ++ 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 89d78208de3f..78f148ea9d9f 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -20,6 +20,8 @@ config BMA180 config BMA220 tristate "Bosch BMA220 3-Axis Accelerometer Driver" depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say yes here to add support for the Bosch BMA220 triaxial acceleration sensor. @@ -234,7 +236,8 @@ config STK8312 config STK8BA50 tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver" depends on I2C - depends on IIO_TRIGGER + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say yes here to get support for the Sensortek STK8BA50 3-axis accelerometer. diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig index 738a86d9e4a9..d04124345992 100644 --- a/drivers/iio/humidity/Kconfig +++ b/drivers/iio/humidity/Kconfig @@ -6,6 +6,8 @@ menu "Humidity sensors" config AM2315 tristate "Aosong AM2315 relative humidity and temperature sensor" depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help If you say yes here you get support for the Aosong AM2315 relative humidity and ambient temperature sensor. diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 7c566f516572..12ceb11bc7c5 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -238,6 +238,8 @@ config MAX44000 tristate "MAX44000 Ambient and Infrared Proximity Sensor" depends on I2C select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say Y here if you want to build support for Maxim Integrated's MAX44000 ambient and infrared proximity sensor device. -- cgit v1.2.3 From 31f453eac56bdc41f434126bc2d5933b9fb720ec Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 27 Jul 2016 22:32:58 +0200 Subject: iio: pressure: bmp280: fix runtime suspend/resume crash In commit 3d838118c6aa ("iio: pressure: bmp280: add power management") For some reason the code in the runtime suspend/resume hooks got wrong (I suspect in the ambition to cut down boilerplate) and it seems it was tested without CONFIG_PM and crashes like so for me: Unable to handle kernel NULL pointer dereference at virtual address 0000000c pgd = c0204000 [0000000c] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 89 Comm: kworker/1:2 Not tainted 4.7.0-03348-g90dc3680458a-dirty #99 Hardware name: Generic DT based system Workqueue: pm pm_runtime_work task: df3c6300 ti: dec8a000 task.ti: dec8a000 PC is at regulator_disable+0x0/0x6c LR is at bmp280_runtime_suspend+0x3c/0xa4 Dereferencing the BMP280 state container properly fixes the problem, sorry for screwing up. Fixes: 3d838118c6aa ("iio: pressure: bmp280: add power management") Signed-off-by: Linus Walleij Tested-by: Jarkko Nikula Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/bmp280-core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 94e27b2600f3..e5a533cbd53f 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -1079,7 +1079,8 @@ EXPORT_SYMBOL(bmp280_common_remove); #ifdef CONFIG_PM static int bmp280_runtime_suspend(struct device *dev) { - struct bmp280_data *data = dev_get_drvdata(dev); + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmp280_data *data = iio_priv(indio_dev); int ret; ret = regulator_disable(data->vdda); @@ -1090,7 +1091,8 @@ static int bmp280_runtime_suspend(struct device *dev) static int bmp280_runtime_resume(struct device *dev) { - struct bmp280_data *data = dev_get_drvdata(dev); + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmp280_data *data = iio_priv(indio_dev); int ret; ret = regulator_enable(data->vddd); -- cgit v1.2.3 From 7b142d8fd0bd4c9bf06ccb72ac4daedb503f0124 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Thu, 16 Jun 2016 00:45:33 +0200 Subject: android: binder: fix dangling pointer comparison If /dev/binder is opened and the opener process then e.g. calls execve, proc->vma_vm_mm will still point to the location of the now-freed mm_struct. If the process then calls ioctl(binder_fd, ...), the dangling proc->vma_vm_mm pointer will be compared to current->mm. Let the binder take a reference to the mm_struct to avoid this. v2: use the right refcounter Fixes: a906d6931f3c ("android: binder: Sanity check at binder ioctl") Signed-off-by: Jann Horn Reviewed-by: Chen Feng Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/android/binder.c b/drivers/android/binder.c index 16288e777ec3..09fdb425e2f5 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -2962,6 +2962,7 @@ static int binder_open(struct inode *nodp, struct file *filp) return -ENOMEM; get_task_struct(current); proc->tsk = current; + atomic_inc(¤t->mm->mm_count); proc->vma_vm_mm = current->mm; INIT_LIST_HEAD(&proc->todo); init_waitqueue_head(&proc->wait); @@ -3167,6 +3168,7 @@ static void binder_deferred_release(struct binder_proc *proc) vfree(proc->buffer); } + mmdrop(proc->vma_vm_mm); put_task_struct(proc->tsk); binder_debug(BINDER_DEBUG_OPEN_CLOSE, -- cgit v1.2.3 From f6b6a28e2dbc401416ff12f775d75281c9b41918 Mon Sep 17 00:00:00 2001 From: Gabriel Krisman Bertazi Date: Fri, 29 Jul 2016 16:15:18 -0300 Subject: nvme: Prevent controller state invalid transition Acquiring the nvme_ctrl lock before reading ctrl->state in nvme_change_ctrl_state() should prevent a theoretical invalid state transition, in the event of two threads racing inside that function. I haven't been able to observe this happening with the current code, and the current state machine seems to be simple enough to not be affected by these invalid transitions, but future modifications could make it more likely to happen. Signed-off-by: Gabriel Krisman Bertazi Reviewed-by: Sagi Grimberg Reviewed-by: Steve Wise Signed-off-by: Jens Axboe --- drivers/nvme/host/core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 7ff2e820bbf4..7f75d661237f 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -81,10 +81,12 @@ EXPORT_SYMBOL_GPL(nvme_cancel_request); bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl, enum nvme_ctrl_state new_state) { - enum nvme_ctrl_state old_state = ctrl->state; + enum nvme_ctrl_state old_state; bool changed = false; spin_lock_irq(&ctrl->lock); + + old_state = ctrl->state; switch (new_state) { case NVME_CTRL_LIVE: switch (old_state) { @@ -140,11 +142,12 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl, default: break; } - spin_unlock_irq(&ctrl->lock); if (changed) ctrl->state = new_state; + spin_unlock_irq(&ctrl->lock); + return changed; } EXPORT_SYMBOL_GPL(nvme_change_ctrl_state); -- cgit v1.2.3 From 0d9dcf852334b796bacc7020364afba3122db81e Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Mon, 8 Aug 2016 11:14:36 -0700 Subject: iio: humidity: hdc100x: fix sensor data reads of temp and humidity Replace the i2c_smbus_read_byte commmands used to retrieve the sensor data with an i2c_master_recv command. The smbus read byte method fails because the device does not expect a stop condition after sending the first byte. When we issue the second read, we are getting the first byte again. Net effect is that of the 14 bits used for the measurement, the 8 most significant bits are correct, the lower 6 are not. None of the smbus read protocols follow the pattern this device requires (S Addr Rd [A] Data [A] Data NA P), hence the switch to an i2c receive transaction. Applicable from original introduction of this driver, but will require backporting due to churn in the code. Signed-off-by: Alison Schofield Cc: Daniel Baluta Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/hdc100x.c | 27 +++++++-------------------- 1 file changed, 7 insertions(+), 20 deletions(-) diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c index a03832a5fc95..e0c9c70c2a4a 100644 --- a/drivers/iio/humidity/hdc100x.c +++ b/drivers/iio/humidity/hdc100x.c @@ -142,7 +142,7 @@ static int hdc100x_get_measurement(struct hdc100x_data *data, struct i2c_client *client = data->client; int delay = data->adc_int_us[chan->address]; int ret; - int val; + __be16 val; /* start measurement */ ret = i2c_smbus_write_byte(client, chan->address); @@ -154,26 +154,13 @@ static int hdc100x_get_measurement(struct hdc100x_data *data, /* wait for integration time to pass */ usleep_range(delay, delay + 1000); - /* - * i2c_smbus_read_word_data cannot() be used here due to the command - * value not being understood and causes NAKs preventing any reading - * from being accessed. - */ - ret = i2c_smbus_read_byte(client); + /* read measurement */ + ret = i2c_master_recv(data->client, (char *)&val, sizeof(val)); if (ret < 0) { - dev_err(&client->dev, "cannot read high byte measurement"); + dev_err(&client->dev, "cannot read sensor data\n"); return ret; } - val = ret << 8; - - ret = i2c_smbus_read_byte(client); - if (ret < 0) { - dev_err(&client->dev, "cannot read low byte measurement"); - return ret; - } - val |= ret; - - return val; + return be16_to_cpu(val); } static int hdc100x_get_heater_status(struct hdc100x_data *data) @@ -272,8 +259,8 @@ static int hdc100x_probe(struct i2c_client *client, struct iio_dev *indio_dev; struct hdc100x_data *data; - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE)) + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C)) return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); -- cgit v1.2.3 From ddbc719f99cf9aed6918cef98cb3475fd4fc4fa6 Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Tue, 26 Jul 2016 20:17:43 -0700 Subject: tools: iio: iio_generic_buffer: initialize channel array pointer Uninitialized channel pointer causes segmentation fault when we call free(channel) during cleanup() with no channels initialized. This happens when you exit early for usage errors. Initialize the pointer to NULL when it is declared. Signed-off-by: Alison Schofield Cc: Daniel Baluta Tested-by: Gregor Boirie Signed-off-by: Jonathan Cameron --- tools/iio/iio_generic_buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/iio/iio_generic_buffer.c b/tools/iio/iio_generic_buffer.c index 0e8a1f7a292d..ae68bf0e2d51 100644 --- a/tools/iio/iio_generic_buffer.c +++ b/tools/iio/iio_generic_buffer.c @@ -348,7 +348,7 @@ int main(int argc, char **argv) int notrigger = 0; char *dummy; - struct iio_channel_info *channels; + struct iio_channel_info *channels = NULL; register_cleanup(); -- cgit v1.2.3 From 49a7f01064a94c4fd6afb6b4f7e3ccc37d0edf99 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Sat, 13 Aug 2016 01:12:10 -0300 Subject: perf jitdump: Add the right header to get the major()/minor() definitions Noticed on Fedora Rawhide: $ gcc --version gcc (GCC) 6.1.1 20160721 (Red Hat 6.1.1-4) $ rpm -q glibc glibc-2.24.90-1.fc26.x86_64 $ CC /tmp/build/perf/util/jitdump.o util/jitdump.c: In function 'jit_repipe_code_load': util/jitdump.c:428:2: error: '__major_from_sys_types' is deprecated: In the GNU C Library, `major' is defined by . For historical compatibility, it is currently defined by as well, but we plan to remove this soon. To use `major', include directly. If you did not intend to use a system-defined macro `major', you should #undef it after including . [-Werror=deprecated-declarations] event->mmap2.maj = major(st.st_dev); ^~~~~ In file included from /usr/include/features.h:397:0, from /usr/include/sys/types.h:25, from util/jitdump.c:1: /usr/include/sys/sysmacros.h:87:1: note: declared here __SYSMACROS_DEFINE_MAJOR (__SYSMACROS_FST_IMPL_TEMPL) Fix it following that recomendation. Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Stephane Eranian Cc: Wang Nan Link: http://lkml.kernel.org/n/tip-3majvd0adhfr25rvx4v5e9te@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/jitdump.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/perf/util/jitdump.c b/tools/perf/util/jitdump.c index 9f3305f6b6d5..95f0884aae02 100644 --- a/tools/perf/util/jitdump.c +++ b/tools/perf/util/jitdump.c @@ -1,3 +1,4 @@ +#include #include #include #include -- cgit v1.2.3 From c2ab447454d498e709d9011c0f2d2945ee321f9b Mon Sep 17 00:00:00 2001 From: Anders Darander Date: Mon, 8 Aug 2016 14:42:16 +0200 Subject: iio: adc: at91: unbreak channel adc channel 3 The driver always assumes that an input device has been created when reading channel 3. This causes a kernel panic when dereferencing st->ts_input. The change was introduced in commit 84882b060301 ("iio: adc: at91_adc: Add support for touchscreens without TSMR"). Earlier versions only entered that part of the if-else statement if only the following flags are set: AT91_ADC_IER_XRDY | AT91_ADC_IER_YRDY | AT91_ADC_IER_PRDY Signed-off-by: Anders Darander Acked-by: Alexandre Belloni Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/at91_adc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 52430ba171f3..0438c68015e8 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -381,8 +381,8 @@ static irqreturn_t at91_adc_rl_interrupt(int irq, void *private) st->ts_bufferedmeasure = false; input_report_key(st->ts_input, BTN_TOUCH, 0); input_sync(st->ts_input); - } else if (status & AT91_ADC_EOC(3)) { - /* Conversion finished */ + } else if (status & AT91_ADC_EOC(3) && st->ts_input) { + /* Conversion finished and we've a touchscreen */ if (st->ts_bufferedmeasure) { /* * Last measurement is always discarded, since it can -- cgit v1.2.3 From 34276bb062b8449b3b0a208c9b848a1a27920075 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 15 Aug 2016 14:58:43 +0200 Subject: of: fix reference counting in of_graph_get_endpoint_by_regs The called of_graph_get_next_endpoint() already decrements the refcount of the prev node, so it is wrong to do it again in the calling function. Use the for_each_endpoint_of_node() helper to interate through the endpoint OF nodes, which already does the right thing and simplifies the code a bit. Fixes: 8ccd0d0ca041 (of: add helper for getting endpoint node of specific identifiers) Cc: stable@vger.kernel.org Reported-by: David Jander Signed-off-by: Lucas Stach Acked-by: Philipp Zabel Signed-off-by: Rob Herring --- drivers/of/base.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/of/base.c b/drivers/of/base.c index cb255a07baa0..3ce69536a7b3 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -2342,20 +2342,13 @@ struct device_node *of_graph_get_endpoint_by_regs( const struct device_node *parent, int port_reg, int reg) { struct of_endpoint endpoint; - struct device_node *node, *prev_node = NULL; - - while (1) { - node = of_graph_get_next_endpoint(parent, prev_node); - of_node_put(prev_node); - if (!node) - break; + struct device_node *node = NULL; + for_each_endpoint_of_node(parent, node) { of_graph_parse_endpoint(node, &endpoint); if (((port_reg == -1) || (endpoint.port == port_reg)) && ((reg == -1) || (endpoint.id == reg))) return node; - - prev_node = node; } return NULL; -- cgit v1.2.3 From 88ded4d8d94a550624e1827478e13fecf97a7b0a Mon Sep 17 00:00:00 2001 From: He Kuang Date: Thu, 4 Aug 2016 11:25:42 +0000 Subject: perf script: Show proper message when failed list scripts Perf shows the usage message when perf scripts folder failed to open, which misleads users to let them think the command is being mistyped. This patch shows a proper message and guides users to check the PERF_EXEC_PATH environment variable in that case. Before: $ perf script --list Usage: perf script [] or: perf script [] record