From f5a9f0ca40c74547e28e0cb30973df5577dfbaec Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Fri, 30 May 2014 23:49:57 +0300 Subject: ath10k: remove unnecessary htt rx corruption check While fixing a bug reported by Avery I went ahead and added a warning suspecting there might be something more to the bug. This ended up with people reporting they see warnings during heavy traffic. This bought me some time and helped me understand the problem better - apparently fw/hw can report a chained msdus as follows: 1 msdu, 1 chained, 1 msdu (0 length). The patch removes the extra check but leaves the other change that fixed the original skb_push panic bug (msdu_chaining was overwritten in an unfortunate way which made the above example to be treated as non-chained case). Reported-by: Yeoh Chun-Yeow Reported-by: Tim Harvey Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/htt_rx.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index 6c102b1312ff..eebc860c3655 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -312,7 +312,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt, int msdu_len, msdu_chaining = 0; struct sk_buff *msdu; struct htt_rx_desc *rx_desc; - bool corrupted = false; lockdep_assert_held(&htt->rx_ring.lock); @@ -439,9 +438,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt, last_msdu = __le32_to_cpu(rx_desc->msdu_end.info0) & RX_MSDU_END_INFO0_LAST_MSDU; - if (msdu_chaining && !last_msdu) - corrupted = true; - if (last_msdu) { msdu->next = NULL; break; @@ -456,20 +452,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt, if (*head_msdu == NULL) msdu_chaining = -1; - /* - * Apparently FW sometimes reports weird chained MSDU sequences with - * more than one rx descriptor. This seems like a bug but needs more - * analyzing. For the time being fix it by dropping such sequences to - * avoid blowing up the host system. - */ - if (corrupted) { - ath10k_warn("failed to pop chained msdus, dropping\n"); - ath10k_htt_rx_free_msdu_chain(*head_msdu); - *head_msdu = NULL; - *tail_msdu = NULL; - msdu_chaining = -EINVAL; - } - /* * Don't refill the ring yet. * -- cgit v1.2.3 From dfa413de1e4388818f7dcdce0a90d6212e74895b Mon Sep 17 00:00:00 2001 From: Bartosz Markowski Date: Mon, 2 Jun 2014 21:19:45 +0300 Subject: ath10k: fix 8th virtual AP interface with DFS Firmware 10.x supports up to 8 virtual AP interfaces, but in a DFS channel it was possible to create only 7 interfaces as ath10k internal creates a monitor interface for DFS. Previous vdev map initialization was missing enough space for 8 + 1 vdevs due to wrong define used and that's why there was no space for 8th interface. Use the correct define TARGET_10X_NUM_VDEVS with 10.x firmware to make it possible to create the 8th virtual interface. Signed-off-by: Bartosz Markowski Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 82017f56e661..e6c56c5bb0f6 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -795,7 +795,11 @@ int ath10k_core_start(struct ath10k *ar) if (status) goto err_htc_stop; - ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1; + if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) + ar->free_vdev_map = (1 << TARGET_10X_NUM_VDEVS) - 1; + else + ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1; + INIT_LIST_HEAD(&ar->arvifs); if (!test_bit(ATH10K_FLAG_FIRST_BOOT_DONE, &ar->dev_flags)) -- cgit v1.2.3 From 0ccf091d1fbc1f99bb7f93bff8cf346769a9b0cd Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Tue, 10 Jun 2014 11:05:43 +0200 Subject: HID: sensor-hub: make dyn_callback_lock IRQ-safe dyn_callback_lock is being taken from IRQ context through hid_irq_in() -> hid_input_report() -> sensor_hub_raw_event() -> sensor_hub_get_callback(), therefore anyone else acquiring it needs to disable IRQs to disable deadlocks. Reported-by: Alexander Holler Tested-by: Alexander Holler Reported-by: Reyad Attiyat Signed-off-by: Jiri Kosina --- drivers/hid/hid-sensor-hub.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index a8d5c8faf8cf..13ce4e3aebf4 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -159,17 +159,18 @@ int sensor_hub_register_callback(struct hid_sensor_hub_device *hsdev, { struct hid_sensor_hub_callbacks_list *callback; struct sensor_hub_data *pdata = hid_get_drvdata(hsdev->hdev); + unsigned long flags; - spin_lock(&pdata->dyn_callback_lock); + spin_lock_irqsave(&pdata->dyn_callback_lock, flags); list_for_each_entry(callback, &pdata->dyn_callback_list, list) if (callback->usage_id == usage_id && callback->hsdev == hsdev) { - spin_unlock(&pdata->dyn_callback_lock); + spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags); return -EINVAL; } callback = kzalloc(sizeof(*callback), GFP_ATOMIC); if (!callback) { - spin_unlock(&pdata->dyn_callback_lock); + spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags); return -ENOMEM; } callback->hsdev = hsdev; @@ -177,7 +178,7 @@ int sensor_hub_register_callback(struct hid_sensor_hub_device *hsdev, callback->usage_id = usage_id; callback->priv = NULL; list_add_tail(&callback->list, &pdata->dyn_callback_list); - spin_unlock(&pdata->dyn_callback_lock); + spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags); return 0; } @@ -188,8 +189,9 @@ int sensor_hub_remove_callback(struct hid_sensor_hub_device *hsdev, { struct hid_sensor_hub_callbacks_list *callback; struct sensor_hub_data *pdata = hid_get_drvdata(hsdev->hdev); + unsigned long flags; - spin_lock(&pdata->dyn_callback_lock); + spin_lock_irqsave(&pdata->dyn_callback_lock, flags); list_for_each_entry(callback, &pdata->dyn_callback_list, list) if (callback->usage_id == usage_id && callback->hsdev == hsdev) { @@ -197,7 +199,7 @@ int sensor_hub_remove_callback(struct hid_sensor_hub_device *hsdev, kfree(callback); break; } - spin_unlock(&pdata->dyn_callback_lock); + spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags); return 0; } @@ -378,15 +380,16 @@ static int sensor_hub_suspend(struct hid_device *hdev, pm_message_t message) { struct sensor_hub_data *pdata = hid_get_drvdata(hdev); struct hid_sensor_hub_callbacks_list *callback; + unsigned long flags; hid_dbg(hdev, " sensor_hub_suspend\n"); - spin_lock(&pdata->dyn_callback_lock); + spin_lock_irqsave(&pdata->dyn_callback_lock, flags); list_for_each_entry(callback, &pdata->dyn_callback_list, list) { if (callback->usage_callback->suspend) callback->usage_callback->suspend( callback->hsdev, callback->priv); } - spin_unlock(&pdata->dyn_callback_lock); + spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags); return 0; } @@ -395,15 +398,16 @@ static int sensor_hub_resume(struct hid_device *hdev) { struct sensor_hub_data *pdata = hid_get_drvdata(hdev); struct hid_sensor_hub_callbacks_list *callback; + unsigned long flags; hid_dbg(hdev, " sensor_hub_resume\n"); - spin_lock(&pdata->dyn_callback_lock); + spin_lock_irqsave(&pdata->dyn_callback_lock, flags); list_for_each_entry(callback, &pdata->dyn_callback_list, list) { if (callback->usage_callback->resume) callback->usage_callback->resume( callback->hsdev, callback->priv); } - spin_unlock(&pdata->dyn_callback_lock); + spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags); return 0; } -- cgit v1.2.3 From 4732aee97b2b05adb472bd7a9ff31af95cbfe62a Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Tue, 10 Jun 2014 20:04:58 +0800 Subject: HID: sensor-hub: introduce Kconfig dependency on IOMEM When NO_IOMEM is enabled (e.g. score architecture), some drivers which need HAS_IOMEM need notice about it, or it will report related warning: warning: (GPIO_SCH && GPIO_ICH && GPIO_VX855 && GPIO_RDC321X && IE6XX_WDT && RADIO_WL1273 && HID_SENSOR_HUB && MFD_NVEC) selects MFD_CORE which has unmet direct dependencies (HAS_IOMEM) Signed-off-by: Chen Gang Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 2 +- drivers/phy/Kconfig | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 800c8b60f7a2..5e79c6ad914f 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -810,7 +810,7 @@ config HID_ZYDACRON config HID_SENSOR_HUB tristate "HID Sensors framework support" - depends on HID + depends on HID && HAS_IOMEM select MFD_CORE default n ---help--- diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 16a2f067c242..fcdfe7c0e4a7 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -122,6 +122,7 @@ config PHY_SUN4I_USB config PHY_SAMSUNG_USB2 tristate "Samsung USB 2.0 PHY driver" + depends on HAS_IOMEM select GENERIC_PHY select MFD_SYSCON help -- cgit v1.2.3 From a278e26830a2aa6dee1bd4f0ed5ff2bdea4d8887 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 11 Jun 2014 21:03:18 +0200 Subject: HID: rmi: Protect PM-only functions by #ifdef CONFIG_PM MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_PM=n: drivers/hid/hid-rmi.c:432: warning: ‘rmi_post_reset’ defined but not used drivers/hid/hid-rmi.c:437: warning: ‘rmi_post_resume’ defined but not used Signed-off-by: Geert Uytterhoeven Signed-off-by: Jiri Kosina --- drivers/hid/hid-rmi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c index 2451c7e5febd..578bbe65902b 100644 --- a/drivers/hid/hid-rmi.c +++ b/drivers/hid/hid-rmi.c @@ -428,6 +428,7 @@ static int rmi_raw_event(struct hid_device *hdev, return 0; } +#ifdef CONFIG_PM static int rmi_post_reset(struct hid_device *hdev) { return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); @@ -437,6 +438,7 @@ static int rmi_post_resume(struct hid_device *hdev) { return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); } +#endif /* CONFIG_PM */ #define RMI4_MAX_PAGE 0xff #define RMI4_PAGE_SIZE 0x0100 -- cgit v1.2.3 From 0b514fdb52073e348ade842355f37f6976768e44 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 15 May 2014 08:48:21 +0900 Subject: ARM: shmobile: Add DT and defconfigs to MAINTAINERS There are a number of DT and defconfig files which are maintained as part of shmobile but have not been listed as such in the MAINTAINERS file. This creates confusion from time to time. Signed-off-by: Simon Horman --- MAINTAINERS | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 134483f206e4..32e8a20a0743 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1296,6 +1296,20 @@ W: http://oss.renesas.com Q: http://patchwork.kernel.org/project/linux-sh/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next S: Supported +F: arch/arm/boot/dts/emev2* +F: arch/arm/boot/dts/r7s* +F: arch/arm/boot/dts/r8a* +F: arch/arm/boot/dts/sh* +F: arch/arm/configs/ape6evm_defconfig +F: arch/arm/configs/armadillo800eva_defconfig +F: arch/arm/configs/bockw_defconfig +F: arch/arm/configs/genmai_defconfig +F: arch/arm/configs/koelsch_defconfig +F: arch/arm/configs/kzm9g_defconfig +F: arch/arm/configs/lager_defconfig +F: arch/arm/configs/mackerel_defconfig +F: arch/arm/configs/marzen_defconfig +F: arch/arm/configs/shmobile_defconfig F: arch/arm/mach-shmobile/ F: drivers/sh/ -- cgit v1.2.3 From acbd573354bb7b7b7a3891018a39f4b3976b0c43 Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Tue, 17 Jun 2014 15:07:55 +0300 Subject: libahci_platform: Fail when PHY required but PHY support disabled ahci_platform_get_resources handles resource management for platform AHCI drivers, including getting a possible PHY from the device tree. Since not all drivers need a PHY, it ignores -ENODEV and -ENOSYS from devm_get_phy. However, when the PHY subsystem is mistakenly disabled, -ENOSYS can be returned even when a PHY is needed. This patch modifies the -ENOSYS case to check if a "phys" device tree node exists. If it exists, then clearly the PHY subsystem is mistakenly disabled and the driver cannot work, ahci_platform_get_resources will fail and propagate the error. Signed-off-by: Mikko Perttunen Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: Tejun Heo --- drivers/ata/libahci_platform.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index 3a5b4ed25a4f..b0077589f065 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -250,8 +250,13 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev) if (IS_ERR(hpriv->phy)) { rc = PTR_ERR(hpriv->phy); switch (rc) { - case -ENODEV: case -ENOSYS: + /* No PHY support. Check if PHY is required. */ + if (of_find_property(dev->of_node, "phys", NULL)) { + dev_err(dev, "couldn't get sata-phy: ENOSYS\n"); + goto err_out; + } + case -ENODEV: /* continue normally */ hpriv->phy = NULL; break; -- cgit v1.2.3 From d066c946a866268c14a120b33e7226e899981998 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 17 Jun 2014 15:40:13 -0600 Subject: PCI: Fix unaligned access in AF transaction pending test pci_wait_for_pending() uses word access, so we shouldn't be passing an offset that is only byte aligned. Use the control register offset instead, shifting the mask to match. Fixes: d0b4cc4e3270 ("PCI: Wrong register used to check pending traffic") Fixes: 157e876ffe0b ("PCI: Add pci_wait_for_pending() (refactor pci_wait_for_pending_transaction()) Reported-by: Ben Hutchings Signed-off-by: Alex Williamson Signed-off-by: Bjorn Helgaas Acked-by: Gavin Shan CC: stable@vger.kernel.org # v3.14+ --- drivers/pci/pci.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 63a54a340863..1c8592b0e146 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3135,8 +3135,13 @@ static int pci_af_flr(struct pci_dev *dev, int probe) if (probe) return 0; - /* Wait for Transaction Pending bit clean */ - if (pci_wait_for_pending(dev, pos + PCI_AF_STATUS, PCI_AF_STATUS_TP)) + /* + * Wait for Transaction Pending bit to clear. A word-aligned test + * is used, so we use the conrol offset rather than status and shift + * the test bit to match. + */ + if (pci_wait_for_pending(dev, pos + PCI_AF_CTRL, + PCI_AF_STATUS_TP << 8)) goto clear; dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); -- cgit v1.2.3 From 99bae5f94185c2cc65701e95c54e31e2f4345b88 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 12 Jun 2014 14:31:31 +0800 Subject: cgroup: fix broken css_has_online_children() After running: # mount -t cgroup cpu xxx /cgroup && mkdir /cgroup/sub && \ rmdir /cgroup/sub && umount /cgroup I found the cgroup root still existed: # cat /proc/cgroups #subsys_name hierarchy num_cgroups enabled cpuset 0 1 1 cpu 1 1 1 ... It turned out css_has_online_children() is broken. Signed-off-by: Li Zefan Sigend-off-by: Tejun Heo --- kernel/cgroup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 7868fc3c0bc5..d9a8be911f5b 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -3328,7 +3328,7 @@ bool css_has_online_children(struct cgroup_subsys_state *css) rcu_read_lock(); css_for_each_child(child, css) { - if (css->flags & CSS_ONLINE) { + if (child->flags & CSS_ONLINE) { ret = true; break; } -- cgit v1.2.3 From bd07894e217b174361711320be50c8308456096d Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 30 May 2014 15:50:52 +0530 Subject: pinctrl: sunxi: Fix potential null pointer dereference kzalloc can fail. Add a null check to avoid null pointer dereference error while accessing the pointer later. Signed-off-by: Sachin Kamat Acked-by: Maxime Ripard Signed-off-by: Linus Walleij --- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c index f1ca75e6d7b1..5f38c7f67834 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c @@ -211,6 +211,10 @@ static int sunxi_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev, configlen++; pinconfig = kzalloc(configlen * sizeof(*pinconfig), GFP_KERNEL); + if (!pinconfig) { + kfree(*map); + return -ENOMEM; + } if (!of_property_read_u32(node, "allwinner,drive", &val)) { u16 strength = (val + 1) * 10; -- cgit v1.2.3 From 6c7ee8905d54e66d01902c59490bbc99d87d4efb Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 16 Jun 2014 12:32:33 +0300 Subject: clk: ti: apll: not allocating enough data There is a cut and paste bug here which will lead to memory corruption because we don't allocate enough data. Fixes: 4d008589e271 ('CLK: TI: APLL: add support for omap2 aplls') Signed-off-by: Dan Carpenter Signed-off-by: Tero Kristo --- drivers/clk/ti/apll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c index 5428c9c547cd..18dbaf128a39 100644 --- a/drivers/clk/ti/apll.c +++ b/drivers/clk/ti/apll.c @@ -338,7 +338,7 @@ static void __init of_omap2_apll_setup(struct device_node *node) const char *parent_name; u32 val; - ad = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + ad = kzalloc(sizeof(*ad), GFP_KERNEL); clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); init = kzalloc(sizeof(*init), GFP_KERNEL); -- cgit v1.2.3 From 8d2f9e8eca807479c83c8f765b6859838da618eb Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 19 May 2014 19:25:48 +0800 Subject: clk: ti: dra7: return error code in failure case Add a returned error code in the MAX_APLL_WAIT_TRIES case. Remove the updating of the return variable r to 0 if MAX_APLL_WAIT_TRIES is not yet reached, because r is already 0 at this point. Signed-off-by: Julia Lawall Signed-off-by: Tero Kristo --- drivers/clk/ti/apll.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c index 18dbaf128a39..72d97279eae1 100644 --- a/drivers/clk/ti/apll.c +++ b/drivers/clk/ti/apll.c @@ -77,13 +77,11 @@ static int dra7_apll_enable(struct clk_hw *hw) if (i == MAX_APLL_WAIT_TRIES) { pr_warn("clock: %s failed transition to '%s'\n", clk_name, (state) ? "locked" : "bypassed"); - } else { + r = -EBUSY; + } else pr_debug("clock: %s transition to '%s' in %d loops\n", clk_name, (state) ? "locked" : "bypassed", i); - r = 0; - } - return r; } -- cgit v1.2.3 From 32cff42d0dc4fa5f474eff0980829537c520df5d Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 17 Jun 2014 17:03:24 +0300 Subject: clk: ti: am43x: Fix boot with CONFIG_SOC_AM33XX disabled Define ti_clk_register_dpll_x2() and of_ti_am3_dpll_x2_setup() if AM43XX is defined. Fixes the below boot issue. [ 2.157258] gpmc_l3_clk not enabled [ 2.161194] gpmc_l3_clk not enabled [ 2.164896] Division by zero in kernel. [ 2.169055] CPU: 0 PID: 321 Comm: kworker/u2:2 Tainted: G W 3.16.0-rc1-00008-g4c0e520 #273 [ 2.178880] Workqueue: deferwq deferred_probe_work_func [ 2.184459] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 2.192752] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 2.200486] [] (dump_stack) from [] (Ldiv0+0x8/0x10) [ 2.207678] [] (Ldiv0) from [] (gpmc_calc_divider+0x24/0x40) [ 2.215490] [] (gpmc_calc_divider) from [] (gpmc_cs_set_timings+0x18/0x474) [ 2.224783] [] (gpmc_cs_set_timings) from [] (gpmc_nand_init+0x74/0x1a8) [ 2.233791] [] (gpmc_nand_init) from [] (gpmc_probe+0x52c/0x874) [ 2.242089] [] (gpmc_probe) from [] (platform_drv_probe+0x18/0x48) [ 2.250534] [] (platform_drv_probe) from [] (driver_probe_device+0x104/0x22c) [ 2.259988] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 2.269087] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 2.277620] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 2.286074] [] (bus_probe_device) from [] (deferred_probe_work_func+0x60/0x90) [ 2.295611] [] (deferred_probe_work_func) from [] (process_one_work+0x1b4/0x4bc) [ 2.305288] [] (process_one_work) from [] (worker_thread+0x148/0x550) [ 2.313954] [] (worker_thread) from [] (kthread+0xc8/0xe4) [ 2.321628] [] (kthread) from [] (ret_from_fork+0x14/0x2c) Signed-off-by: Roger Quadros Reported-by: Tony Lindgren Signed-off-by: Tero Kristo --- drivers/clk/ti/dpll.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index abd956d5f838..79791e1bf282 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -161,7 +161,8 @@ cleanup: } #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ - defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) || \ + defined(CONFIG_SOC_AM43XX) /** * ti_clk_register_dpll_x2 - Registers a DPLLx2 clock * @node: device node for this clock @@ -322,7 +323,7 @@ CLK_OF_DECLARE(ti_omap4_dpll_x2_clock, "ti,omap4-dpll-x2-clock", of_ti_omap4_dpll_x2_setup); #endif -#ifdef CONFIG_SOC_AM33XX +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) static void __init of_ti_am3_dpll_x2_setup(struct device_node *node) { ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops, NULL); -- cgit v1.2.3 From 7d5fc85d961b807c799786afd175f5d964a2109f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jun 2014 11:04:32 +0300 Subject: clk: ti: set CLK_SET_RATE_NO_REPARENT for ti,mux-clock When setting the rate of a clock, by default the clock framework will change the parent of the clock to the most suitable one in __clk_mux_determine_rate() (most suitable by looking at the clock rate). This is a rather dangerous default, and causes problems on AM43x when using display and ethernet. There are multiple ways to select the clock muxes on AM43x, and some of those clock paths have the same source clocks for display and ethernet. When changing the clock rate for the display subsystem, the clock framework decides to change the display mux from the dedicated display PLL to a shared PLL which is used by the ethernet, and then changes the rate of the shared PLL, breaking the ethernet. As I don't think there ever is a case where we want the clock framework to automatically change the parent clock of a clock mux, this patch sets the CLK_SET_RATE_NO_REPARENT for all ti,mux-clocks. Signed-off-by: Tomi Valkeinen Reviewed-by: Paul Walmsley Tested-by: Felipe Balbi Signed-off-by: Tero Kristo --- drivers/clk/ti/mux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c index 0197a478720c..e9d650e51287 100644 --- a/drivers/clk/ti/mux.c +++ b/drivers/clk/ti/mux.c @@ -160,7 +160,7 @@ static void of_mux_clk_setup(struct device_node *node) u8 clk_mux_flags = 0; u32 mask = 0; u32 shift = 0; - u32 flags = 0; + u32 flags = CLK_SET_RATE_NO_REPARENT; num_parents = of_clk_get_parent_count(node); if (num_parents < 2) { -- cgit v1.2.3 From e6dd42a917e62d916c6e513dbf87a4dec8cf3a1c Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 28 May 2014 23:05:39 +0800 Subject: ahci: imx: manage only sata_ref_clk in imx_sata_enable[disable] Doing suspend/resume on imx6q and imx53 boards with no SATA disk attached will trigger the following warning. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 661 at drivers/ata/libahci.c:224 ahci_enable_ahci+0x74/0x8) Modules linked in: CPU: 0 PID: 661 Comm: sh Tainted: G W 3.15.0-rc5-next-20140521-000027 Backtrace: [<80011c90>] (dump_backtrace) from [<80011e2c>] (show_stack+0x18/0x1c) r6:803a22f4 r5:00000000 r4:00000000 r3:00000000 [<80011e14>] (show_stack) from [<80661e60>] (dump_stack+0x88/0xa4) [<80661dd8>] (dump_stack) from [<80028fdc>] (warn_slowpath_common+0x70/0x94) r5:00000009 r4:00000000 [<80028f6c>] (warn_slowpath_common) from [<80029024>] (warn_slowpath_null+0x24/) r8:808f68c4 r7:00000000 r6:00000000 r5:00000000 r4:e0810004 [<80029000>] (warn_slowpath_null) from [<803a22f4>] (ahci_enable_ahci+0x74/0x80) [<803a2280>] (ahci_enable_ahci) from [<803a2324>] (ahci_reset_controller+0x24/0) r8:ddcd9410 r7:80351178 r6:ddcd9444 r5:dde8b850 r4:e0810000 r3:ddf35e90 [<803a2300>] (ahci_reset_controller) from [<803a2c68>] (ahci_platform_resume_ho) r7:80351178 r6:ddcd9444 r5:dde8b850 r4:ddcd9410 [<803a2c30>] (ahci_platform_resume_host) from [<803a38f0>] (imx_ahci_resume+0x2) r5:00000000 r4:ddcd9410 [<803a38c4>] (imx_ahci_resume) from [<803511ac>] (platform_pm_resume+0x34/0x54) .... The reason is that the SATA controller has no working clock at this point, and thus ahci_enable_ahci() fails to enable the controller. In case that there is no SATA disk attached, the imx_sata_disable() gets called in ahci_imx_error_handler(), and both sata_clk and sata_ref_clk will be disabled there. Because all the imx_sata_enable() calls afterward will return immediately due to imxpriv->no_device check, the SATA controller working clock sata_clk will never get any chance to be enabled again. This is a regression caused by commit 90870d79d4f2 (ahci-imx: Port to library-ised ahci_platform). Before the commit, only sata_ref_clk is managed by the driver in enable/disable function. But after the commit, all the clocks are enabled/disabled in a row by ahci platform helpers ahci_platform_enable[disable]_clks. Since ahb_clk is a bus clock which does not have gate at all, and i.MX low-power hardware module already manages sata_clk across suspend/resume cycle, the only clock that needs to be managed by software is sata_ref_clk. So instead of using ahci_platform_enable[disable]_clks to manage all the clocks in a row from imx_sata_enable[disable], we should manage only sata_ref_clk in there. Reported-by: Fabio Estevam Fixes: 90870d79d4f2 (ahci-imx: Port to library-ised ahci_platform) Signed-off-by: Shawn Guo Acked-by: Hans de Goede --- drivers/ata/ahci_imx.c | 35 +++++++++++++++++++++++++++++++---- 1 file changed, 31 insertions(+), 4 deletions(-) diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c index 3a901520c62b..4384a7d72133 100644 --- a/drivers/ata/ahci_imx.c +++ b/drivers/ata/ahci_imx.c @@ -58,6 +58,8 @@ enum ahci_imx_type { struct imx_ahci_priv { struct platform_device *ahci_pdev; enum ahci_imx_type type; + struct clk *sata_clk; + struct clk *sata_ref_clk; struct clk *ahb_clk; struct regmap *gpr; bool no_device; @@ -224,7 +226,7 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv) return ret; } - ret = ahci_platform_enable_clks(hpriv); + ret = clk_prepare_enable(imxpriv->sata_ref_clk); if (ret < 0) goto disable_regulator; @@ -291,7 +293,7 @@ static void imx_sata_disable(struct ahci_host_priv *hpriv) !IMX6Q_GPR13_SATA_MPLL_CLK_EN); } - ahci_platform_disable_clks(hpriv); + clk_disable_unprepare(imxpriv->sata_ref_clk); if (hpriv->target_pwr) regulator_disable(hpriv->target_pwr); @@ -385,6 +387,19 @@ static int imx_ahci_probe(struct platform_device *pdev) imxpriv->no_device = false; imxpriv->first_time = true; imxpriv->type = (enum ahci_imx_type)of_id->data; + + imxpriv->sata_clk = devm_clk_get(dev, "sata"); + if (IS_ERR(imxpriv->sata_clk)) { + dev_err(dev, "can't get sata clock.\n"); + return PTR_ERR(imxpriv->sata_clk); + } + + imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref"); + if (IS_ERR(imxpriv->sata_ref_clk)) { + dev_err(dev, "can't get sata_ref clock.\n"); + return PTR_ERR(imxpriv->sata_ref_clk); + } + imxpriv->ahb_clk = devm_clk_get(dev, "ahb"); if (IS_ERR(imxpriv->ahb_clk)) { dev_err(dev, "can't get ahb clock.\n"); @@ -407,10 +422,14 @@ static int imx_ahci_probe(struct platform_device *pdev) hpriv->plat_data = imxpriv; - ret = imx_sata_enable(hpriv); + ret = clk_prepare_enable(imxpriv->sata_clk); if (ret) return ret; + ret = imx_sata_enable(hpriv); + if (ret) + goto disable_clk; + /* * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL, * and IP vendor specific register IMX_TIMER1MS. @@ -435,16 +454,24 @@ static int imx_ahci_probe(struct platform_device *pdev) ret = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info, 0, 0, 0); if (ret) - imx_sata_disable(hpriv); + goto disable_sata; + + return 0; +disable_sata: + imx_sata_disable(hpriv); +disable_clk: + clk_disable_unprepare(imxpriv->sata_clk); return ret; } static void ahci_imx_host_stop(struct ata_host *host) { struct ahci_host_priv *hpriv = host->private_data; + struct imx_ahci_priv *imxpriv = hpriv->plat_data; imx_sata_disable(hpriv); + clk_disable_unprepare(imxpriv->sata_clk); } #ifdef CONFIG_PM_SLEEP -- cgit v1.2.3 From d755330c5e0658d8056242b5b81e2f44ed7a96d8 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Sun, 15 Jun 2014 10:22:15 +0200 Subject: perf tools: Fix segfault in cumulative.callchain report When cumulative callchain mode is on, we could get samples with with no actual hits. This breaks the assumption of the annotation code, that each sample has annotation counts allocated and leads to segfault. Fixing this by additional checks for annotation stats. Acked-by: Namhyung Kim Acked-by: Arnaldo Carvalho de Melo Cc: Arnaldo Carvalho de Melo Cc: Corey Ashford Cc: David Ahern Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1402821332-12419-1-git-send-email-jolsa@kernel.org Signed-off-by: Jiri Olsa --- tools/perf/ui/browsers/hists.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c index 52c03fbbba17..04a229aa5c0f 100644 --- a/tools/perf/ui/browsers/hists.c +++ b/tools/perf/ui/browsers/hists.c @@ -17,6 +17,7 @@ #include "../util.h" #include "../ui.h" #include "map.h" +#include "annotate.h" struct hist_browser { struct ui_browser b; @@ -1593,13 +1594,18 @@ static int perf_evsel__hists_browse(struct perf_evsel *evsel, int nr_events, bi->to.sym->name) > 0) annotate_t = nr_options++; } else { - if (browser->selection != NULL && browser->selection->sym != NULL && - !browser->selection->map->dso->annotate_warned && - asprintf(&options[nr_options], "Annotate %s", - browser->selection->sym->name) > 0) - annotate = nr_options++; + !browser->selection->map->dso->annotate_warned) { + struct annotation *notes; + + notes = symbol__annotation(browser->selection->sym); + + if (notes->src && + asprintf(&options[nr_options], "Annotate %s", + browser->selection->sym->name) > 0) + annotate = nr_options++; + } } if (thread != NULL && @@ -1656,6 +1662,7 @@ retry_popup_menu: if (choice == annotate || choice == annotate_t || choice == annotate_f) { struct hist_entry *he; + struct annotation *notes; int err; do_annotate: if (!objdump_path && perf_session_env__lookup_objdump(env)) @@ -1679,6 +1686,10 @@ do_annotate: he->ms.map = he->branch_info->to.map; } + notes = symbol__annotation(he->ms.sym); + if (!notes->src) + continue; + /* * Don't let this be freed, say, by hists__decay_entry. */ -- cgit v1.2.3 From a93f0e551af9e194db38bfe16001e17a3a1d189a Mon Sep 17 00:00:00 2001 From: Simon Que Date: Mon, 16 Jun 2014 11:32:09 -0700 Subject: perf symbols: Get kernel start address by symbol name The function machine__get_kernel_start_addr() was taking the first symbol of kallsyms as the start address. This is incorrect in certain cases where the first symbol is something at 0, while the actual kernel functions begin at a later point (e.g. 0x80200000). This patch fixes machine__get_kernel_start_addr() to search for the symbol "_text" or "_stext", which marks the beginning of kernel mapping. This was already being done in machine__create_kernel_maps(). Thus, this patch is just a refactor, to move that code into machine__get_kernel_start_addr(). Signed-off-by: Simon Que Link: http://lkml.kernel.org/r/1402943529-13244-1-git-send-email-sque@chromium.org Signed-off-by: Jiri Olsa --- tools/perf/util/machine.c | 54 +++++++++++++++++++---------------------------- 1 file changed, 22 insertions(+), 32 deletions(-) diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c index 0e5fea95d596..c73e1fc12e53 100644 --- a/tools/perf/util/machine.c +++ b/tools/perf/util/machine.c @@ -496,18 +496,6 @@ struct process_args { u64 start; }; -static int symbol__in_kernel(void *arg, const char *name, - char type __maybe_unused, u64 start) -{ - struct process_args *args = arg; - - if (strchr(name, '[')) - return 0; - - args->start = start; - return 1; -} - static void machine__get_kallsyms_filename(struct machine *machine, char *buf, size_t bufsz) { @@ -517,27 +505,41 @@ static void machine__get_kallsyms_filename(struct machine *machine, char *buf, scnprintf(buf, bufsz, "%s/proc/kallsyms", machine->root_dir); } -/* Figure out the start address of kernel map from /proc/kallsyms */ -static u64 machine__get_kernel_start_addr(struct machine *machine) +const char *ref_reloc_sym_names[] = {"_text", "_stext", NULL}; + +/* Figure out the start address of kernel map from /proc/kallsyms. + * Returns the name of the start symbol in *symbol_name. Pass in NULL as + * symbol_name if it's not that important. + */ +static u64 machine__get_kernel_start_addr(struct machine *machine, + const char **symbol_name) { char filename[PATH_MAX]; - struct process_args args; + int i; + const char *name; + u64 addr = 0; machine__get_kallsyms_filename(machine, filename, PATH_MAX); if (symbol__restricted_filename(filename, "/proc/kallsyms")) return 0; - if (kallsyms__parse(filename, &args, symbol__in_kernel) <= 0) - return 0; + for (i = 0; (name = ref_reloc_sym_names[i]) != NULL; i++) { + addr = kallsyms__get_function_start(filename, name); + if (addr) + break; + } + + if (symbol_name) + *symbol_name = name; - return args.start; + return addr; } int __machine__create_kernel_maps(struct machine *machine, struct dso *kernel) { enum map_type type; - u64 start = machine__get_kernel_start_addr(machine); + u64 start = machine__get_kernel_start_addr(machine, NULL); for (type = 0; type < MAP__NR_TYPES; ++type) { struct kmap *kmap; @@ -852,23 +854,11 @@ static int machine__create_modules(struct machine *machine) return 0; } -const char *ref_reloc_sym_names[] = {"_text", "_stext", NULL}; - int machine__create_kernel_maps(struct machine *machine) { struct dso *kernel = machine__get_kernel(machine); - char filename[PATH_MAX]; const char *name; - u64 addr = 0; - int i; - - machine__get_kallsyms_filename(machine, filename, PATH_MAX); - - for (i = 0; (name = ref_reloc_sym_names[i]) != NULL; i++) { - addr = kallsyms__get_function_start(filename, name); - if (addr) - break; - } + u64 addr = machine__get_kernel_start_addr(machine, &name); if (!addr) return -1; -- cgit v1.2.3 From a2b23bacb315d3873ed90029fd2b68c95de734c0 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Fri, 20 Jun 2014 12:34:28 +0200 Subject: Revert "Bluetooth: Add a new PID/VID 0cf3/e005 for AR3012." This reverts commit ca58e594da2486c1d28e7ad547d82266604ec4ce. For some unclear reason this patch tries to add suport for the product ID 0xe005, but it ends up adding product ID 0x3005 to all the tables. This is obviously wrong and causing multiple issues. The original patch seemed to be fine, but what ended up in 3.15 is not what the patch intended. The commit 0a3658cccdf53 is already present and adds support for this hardware. This means only revert of this broken commit is requird. Signed-off-by: Marcel Holtmann Reported-by: Alexander Holler Cc: stable@vger.kernel.org # 3.15.x --- drivers/bluetooth/ath3k.c | 2 -- drivers/bluetooth/btusb.c | 1 - 2 files changed, 3 deletions(-) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index f98380648cb3..f50dffc0374f 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -90,7 +90,6 @@ static const struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0b05, 0x17d0) }, { USB_DEVICE(0x0CF3, 0x0036) }, { USB_DEVICE(0x0CF3, 0x3004) }, - { USB_DEVICE(0x0CF3, 0x3005) }, { USB_DEVICE(0x0CF3, 0x3008) }, { USB_DEVICE(0x0CF3, 0x311D) }, { USB_DEVICE(0x0CF3, 0x311E) }, @@ -140,7 +139,6 @@ static const struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, - { USB_DEVICE(0x0cf3, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x311E), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index a1c80b0c7663..6250fc2fb93a 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -162,7 +162,6 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, - { USB_DEVICE(0x0cf3, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 }, -- cgit v1.2.3 From c7262e711ae6e466baeb9ddc21d678c878469b1f Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Tue, 17 Jun 2014 13:07:37 +0300 Subject: Bluetooth: Fix overriding higher security level in SMP When we receive a pairing request or an internal request to start pairing we shouldn't blindly overwrite the existing pending_sec_level value as that may actually be higher than the new one. This patch fixes the SMP code to only overwrite the value in case the new one is higher than the old. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann --- net/bluetooth/smp.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index f2829a7932e2..0189ec8b68d1 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -669,7 +669,7 @@ static u8 smp_cmd_pairing_req(struct l2cap_conn *conn, struct sk_buff *skb) { struct smp_cmd_pairing rsp, *req = (void *) skb->data; struct smp_chan *smp; - u8 key_size, auth; + u8 key_size, auth, sec_level; int ret; BT_DBG("conn %p", conn); @@ -695,7 +695,9 @@ static u8 smp_cmd_pairing_req(struct l2cap_conn *conn, struct sk_buff *skb) /* We didn't start the pairing, so match remote */ auth = req->auth_req; - conn->hcon->pending_sec_level = authreq_to_seclevel(auth); + sec_level = authreq_to_seclevel(auth); + if (sec_level > conn->hcon->pending_sec_level) + conn->hcon->pending_sec_level = sec_level; build_pairing_cmd(conn, req, &rsp, auth); @@ -838,6 +840,7 @@ static u8 smp_cmd_security_req(struct l2cap_conn *conn, struct sk_buff *skb) struct smp_cmd_pairing cp; struct hci_conn *hcon = conn->hcon; struct smp_chan *smp; + u8 sec_level; BT_DBG("conn %p", conn); @@ -847,7 +850,9 @@ static u8 smp_cmd_security_req(struct l2cap_conn *conn, struct sk_buff *skb) if (!(conn->hcon->link_mode & HCI_LM_MASTER)) return SMP_CMD_NOTSUPP; - hcon->pending_sec_level = authreq_to_seclevel(rp->auth_req); + sec_level = authreq_to_seclevel(rp->auth_req); + if (sec_level > hcon->pending_sec_level) + hcon->pending_sec_level = sec_level; if (smp_ltk_encrypt(conn, hcon->pending_sec_level)) return 0; @@ -901,9 +906,12 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level) if (smp_sufficient_security(hcon, sec_level)) return 1; + if (sec_level > hcon->pending_sec_level) + hcon->pending_sec_level = sec_level; + if (hcon->link_mode & HCI_LM_MASTER) - if (smp_ltk_encrypt(conn, sec_level)) - goto done; + if (smp_ltk_encrypt(conn, hcon->pending_sec_level)) + return 0; if (test_and_set_bit(HCI_CONN_LE_SMP_PEND, &hcon->flags)) return 0; @@ -918,7 +926,7 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level) * requires it. */ if (hcon->io_capability != HCI_IO_NO_INPUT_OUTPUT || - sec_level > BT_SECURITY_MEDIUM) + hcon->pending_sec_level > BT_SECURITY_MEDIUM) authreq |= SMP_AUTH_MITM; if (hcon->link_mode & HCI_LM_MASTER) { @@ -937,9 +945,6 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level) set_bit(SMP_FLAG_INITIATOR, &smp->flags); -done: - hcon->pending_sec_level = sec_level; - return 0; } -- cgit v1.2.3 From 581370cc74ea75426421a1f5851ef05e2e995b01 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Tue, 17 Jun 2014 13:07:38 +0300 Subject: Bluetooth: Refactor authentication method lookup into its own function We'll need to do authentication method lookups from more than one place, so refactor the lookup into its own function. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann --- net/bluetooth/smp.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index 0189ec8b68d1..7156f4720644 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -385,6 +385,16 @@ static const u8 gen_method[5][5] = { { CFM_PASSKEY, CFM_PASSKEY, REQ_PASSKEY, JUST_WORKS, OVERLAP }, }; +static u8 get_auth_method(struct smp_chan *smp, u8 local_io, u8 remote_io) +{ + /* If either side has unknown io_caps, use JUST WORKS */ + if (local_io > SMP_IO_KEYBOARD_DISPLAY || + remote_io > SMP_IO_KEYBOARD_DISPLAY) + return JUST_WORKS; + + return gen_method[remote_io][local_io]; +} + static int tk_request(struct l2cap_conn *conn, u8 remote_oob, u8 auth, u8 local_io, u8 remote_io) { @@ -401,14 +411,11 @@ static int tk_request(struct l2cap_conn *conn, u8 remote_oob, u8 auth, BT_DBG("tk_request: auth:%d lcl:%d rem:%d", auth, local_io, remote_io); /* If neither side wants MITM, use JUST WORKS */ - /* If either side has unknown io_caps, use JUST WORKS */ /* Otherwise, look up method from the table */ - if (!(auth & SMP_AUTH_MITM) || - local_io > SMP_IO_KEYBOARD_DISPLAY || - remote_io > SMP_IO_KEYBOARD_DISPLAY) + if (!(auth & SMP_AUTH_MITM)) method = JUST_WORKS; else - method = gen_method[remote_io][local_io]; + method = get_auth_method(smp, local_io, remote_io); /* If not bonding, don't ask user to confirm a Zero TK */ if (!(auth & SMP_AUTH_BONDING) && method == JUST_CFM) -- cgit v1.2.3 From 2ed8f65ca262bca778e60053f667ce11b32db6b8 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Tue, 17 Jun 2014 13:07:39 +0300 Subject: Bluetooth: Fix rejecting pairing in case of insufficient capabilities If we need an MITM protected connection but the local and remote IO capabilities cannot provide it we should reject the pairing attempt in the appropriate way. This patch adds the missing checks for such a situation to the smp_cmd_pairing_req() and smp_cmd_pairing_rsp() functions. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann --- net/bluetooth/smp.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index 7156f4720644..e33a982161c1 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -706,6 +706,16 @@ static u8 smp_cmd_pairing_req(struct l2cap_conn *conn, struct sk_buff *skb) if (sec_level > conn->hcon->pending_sec_level) conn->hcon->pending_sec_level = sec_level; + /* If we need MITM check that it can be acheived */ + if (conn->hcon->pending_sec_level >= BT_SECURITY_HIGH) { + u8 method; + + method = get_auth_method(smp, conn->hcon->io_capability, + req->io_capability); + if (method == JUST_WORKS || method == JUST_CFM) + return SMP_AUTH_REQUIREMENTS; + } + build_pairing_cmd(conn, req, &rsp, auth); key_size = min(req->max_key_size, rsp.max_key_size); @@ -752,6 +762,16 @@ static u8 smp_cmd_pairing_rsp(struct l2cap_conn *conn, struct sk_buff *skb) if (check_enc_key_size(conn, key_size)) return SMP_ENC_KEY_SIZE; + /* If we need MITM check that it can be acheived */ + if (conn->hcon->pending_sec_level >= BT_SECURITY_HIGH) { + u8 method; + + method = get_auth_method(smp, req->io_capability, + rsp->io_capability); + if (method == JUST_WORKS || method == JUST_CFM) + return SMP_AUTH_REQUIREMENTS; + } + get_random_bytes(smp->prnd, sizeof(smp->prnd)); smp->prsp[0] = SMP_CMD_PAIRING_RSP; -- cgit v1.2.3 From 1d56dc4f5f7cdf0ba99062d974b7586a28fc5cf4 Mon Sep 17 00:00:00 2001 From: Lukasz Rymanowski Date: Tue, 17 Jun 2014 13:04:20 +0200 Subject: Bluetooth: Fix for ACL disconnect when pairing fails When pairing fails hci_conn refcnt drops below zero. This cause that ACL link is not disconnected when disconnect timeout fires. Probably this is because l2cap_conn_del calls l2cap_chan_del for each channel, and inside l2cap_chan_del conn is dropped. After that loop hci_chan_del is called which also drops conn. Anyway, as it is desrcibed in hci_core.h, it is known that refcnt drops below 0 sometimes and it should be fine. If so, let disconnect link when hci_conn_timeout fires and refcnt is 0 or below. This patch does it. This affects PTS test SM_TC_JW_BV_05_C Logs from scenario: [69713.706227] [6515] pair_device: [69713.706230] [6515] hci_conn_add: hci0 dst 00:1b:dc:06:06:22 [69713.706233] [6515] hci_dev_hold: hci0 orig refcnt 8 [69713.706235] [6515] hci_conn_init_sysfs: conn ffff88021f65a000 [69713.706239] [6515] hci_req_add_ev: hci0 opcode 0x200d plen 25 [69713.706242] [6515] hci_prepare_cmd: skb len 28 [69713.706243] [6515] hci_req_run: length 1 [69713.706248] [6515] hci_conn_hold: hcon ffff88021f65a000 orig refcnt 0 [69713.706251] [6515] hci_dev_put: hci0 orig refcnt 9 [69713.706281] [8909] hci_cmd_work: hci0 cmd_cnt 1 cmd queued 1 [69713.706288] [8909] hci_send_frame: hci0 type 1 len 28 [69713.706290] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 28 [69713.706316] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.706382] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.711664] [8909] hci_rx_work: hci0 [69713.711668] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 6 [69713.711680] [8909] hci_rx_work: hci0 Event packet [69713.711683] [8909] hci_cs_le_create_conn: hci0 status 0x00 [69713.711685] [8909] hci_sent_cmd_data: hci0 opcode 0x200d [69713.711688] [8909] hci_req_cmd_complete: opcode 0x200d status 0x00 [69713.711690] [8909] hci_sent_cmd_data: hci0 opcode 0x200d [69713.711695] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.711744] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.818875] [8909] hci_rx_work: hci0 [69713.818889] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 21 [69713.818913] [8909] hci_rx_work: hci0 Event packet [69713.818917] [8909] hci_le_conn_complete_evt: hci0 status 0x00 [69713.818922] [8909] hci_send_to_control: len 19 [69713.818927] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.818938] [8909] hci_conn_add_sysfs: conn ffff88021f65a000 [69713.818975] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 [69713.818981] [6515] hci_sock_recvmsg: sock ffff88005e75a080, sk ffff88010323ac00 ... [69713.819021] [8909] hci_dev_hold: hci0 orig refcnt 10 [69713.819025] [8909] l2cap_connect_cfm: hcon ffff88021f65a000 bdaddr 00:1b:dc:06:06:22 status 0 [69713.819028] [8909] hci_chan_create: hci0 hcon ffff88021f65a000 [69713.819031] [8909] l2cap_conn_add: hcon ffff88021f65a000 conn ffff880221005c00 hchan ffff88020d60b1c0 [69713.819034] [8909] l2cap_conn_ready: conn ffff880221005c00 [69713.819036] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.819037] [8909] smp_conn_security: conn ffff880221005c00 hcon ffff88021f65a000 level 0x02 [69713.819039] [8909] smp_chan_create: [69713.819041] [8909] hci_conn_hold: hcon ffff88021f65a000 orig refcnt 1 [69713.819043] [8909] smp_send_cmd: code 0x01 [69713.819045] [8909] hci_send_acl: hci0 chan ffff88020d60b1c0 flags 0x0000 [69713.819046] [5949] hci_sock_recvmsg: sock ffff8800941a9900, sk ffff88012bf4e800 [69713.819049] [8909] hci_queue_acl: hci0 nonfrag skb ffff88005157c100 len 15 [69713.819055] [5949] hci_sock_recvmsg: sock ffff8800941a9900, sk ffff88012bf4e800 [69713.819057] [8909] l2cap_le_conn_ready: [69713.819064] [8909] l2cap_chan_create: chan ffff88005ede2c00 [69713.819066] [8909] l2cap_chan_hold: chan ffff88005ede2c00 orig refcnt 1 [69713.819069] [8909] l2cap_sock_init: sk ffff88005ede5800 [69713.819072] [8909] bt_accept_enqueue: parent ffff880160356000, sk ffff88005ede5800 [69713.819074] [8909] __l2cap_chan_add: conn ffff880221005c00, psm 0x00, dcid 0x0004 [69713.819076] [8909] l2cap_chan_hold: chan ffff88005ede2c00 orig refcnt 2 [69713.819078] [8909] hci_conn_hold: hcon ffff88021f65a000 orig refcnt 2 [69713.819080] [8909] smp_conn_security: conn ffff880221005c00 hcon ffff88021f65a000 level 0x01 [69713.819082] [8909] l2cap_sock_ready_cb: sk ffff88005ede5800, parent ffff880160356000 [69713.819086] [8909] le_pairing_complete_cb: status 0 [69713.819091] [8909] hci_tx_work: hci0 acl 10 sco 8 le 0 [69713.819093] [8909] hci_sched_acl: hci0 [69713.819094] [8909] hci_sched_sco: hci0 [69713.819096] [8909] hci_sched_esco: hci0 [69713.819098] [8909] hci_sched_le: hci0 [69713.819099] [8909] hci_chan_sent: hci0 [69713.819101] [8909] hci_chan_sent: chan ffff88020d60b1c0 quote 10 [69713.819104] [8909] hci_sched_le: chan ffff88020d60b1c0 skb ffff88005157c100 len 15 priority 7 [69713.819106] [8909] hci_send_frame: hci0 type 2 len 15 [69713.819108] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 15 [69713.819119] [8909] hci_chan_sent: hci0 [69713.819121] [8909] hci_prio_recalculate: hci0 [69713.819123] [8909] process_pending_rx: [69713.819226] [6450] hci_sock_recvmsg: sock ffff88005e758780, sk ffff88010323d400 ... [69713.822022] [6450] l2cap_sock_accept: sk ffff880160356000 timeo 0 [69713.822024] [6450] bt_accept_dequeue: parent ffff880160356000 [69713.822026] [6450] bt_accept_unlink: sk ffff88005ede5800 state 1 [69713.822028] [6450] l2cap_sock_accept: new socket ffff88005ede5800 [69713.822368] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.822375] [6450] l2cap_sock_getsockopt: sk ffff88005ede5800 [69713.822383] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.822414] [6450] bt_sock_poll: sock ffff8800941ab700, sk ffff88005ede5800 ... [69713.823255] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.823259] [6450] l2cap_sock_getsockopt: sk ffff88005ede5800 [69713.824322] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.824330] [6450] l2cap_sock_getsockopt: sk ffff88005ede5800 [69713.825029] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 ... [69713.825187] [6450] l2cap_sock_sendmsg: sock ffff8800941ab700, sk ffff88005ede5800 [69713.825189] [6450] bt_sock_wait_ready: sk ffff88005ede5800 [69713.825192] [6450] l2cap_create_basic_pdu: chan ffff88005ede2c00 len 3 [69713.825196] [6450] l2cap_do_send: chan ffff88005ede2c00, skb ffff880160b0b500 len 7 priority 0 [69713.825199] [6450] hci_send_acl: hci0 chan ffff88020d60b1c0 flags 0x0000 [69713.825201] [6450] hci_queue_acl: hci0 nonfrag skb ffff880160b0b500 len 11 [69713.825210] [8909] hci_tx_work: hci0 acl 9 sco 8 le 0 [69713.825213] [8909] hci_sched_acl: hci0 [69713.825214] [8909] hci_sched_sco: hci0 [69713.825216] [8909] hci_sched_esco: hci0 [69713.825217] [8909] hci_sched_le: hci0 [69713.825219] [8909] hci_chan_sent: hci0 [69713.825221] [8909] hci_chan_sent: chan ffff88020d60b1c0 quote 9 [69713.825223] [8909] hci_sched_le: chan ffff88020d60b1c0 skb ffff880160b0b500 len 11 priority 0 [69713.825225] [8909] hci_send_frame: hci0 type 2 len 11 [69713.825227] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 11 [69713.825242] [8909] hci_chan_sent: hci0 [69713.825253] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.825253] [8909] hci_prio_recalculate: hci0 [69713.825292] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.825768] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 ... [69713.866902] [8909] hci_rx_work: hci0 [69713.866921] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 7 [69713.866928] [8909] hci_rx_work: hci0 Event packet [69713.866931] [8909] hci_num_comp_pkts_evt: hci0 num_hndl 1 [69713.866937] [8909] hci_tx_work: hci0 acl 9 sco 8 le 0 [69713.866939] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.866940] [8909] hci_sched_acl: hci0 ... [69713.866944] [8909] hci_sched_le: hci0 [69713.866953] [8909] hci_chan_sent: hci0 [69713.866997] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.867840] [28074] hci_rx_work: hci0 [69713.867844] [28074] hci_send_to_monitor: hdev ffff88021f0c7000 len 7 [69713.867850] [28074] hci_rx_work: hci0 Event packet [69713.867853] [28074] hci_num_comp_pkts_evt: hci0 num_hndl 1 [69713.867857] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.867858] [28074] hci_tx_work: hci0 acl 10 sco 8 le 0 [69713.867860] [28074] hci_sched_acl: hci0 [69713.867861] [28074] hci_sched_sco: hci0 [69713.867862] [28074] hci_sched_esco: hci0 [69713.867863] [28074] hci_sched_le: hci0 [69713.867865] [28074] hci_chan_sent: hci0 [69713.867888] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69714.145661] [8909] hci_rx_work: hci0 [69714.145666] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 10 [69714.145676] [8909] hci_rx_work: hci0 ACL data packet [69714.145679] [8909] hci_acldata_packet: hci0 len 6 handle 0x002d flags 0x0002 [69714.145681] [8909] hci_conn_enter_active_mode: hcon ffff88021f65a000 mode 0 [69714.145683] [8909] l2cap_recv_acldata: conn ffff880221005c00 len 6 flags 0x2 [69714.145693] [8909] l2cap_recv_frame: len 2, cid 0x0006 [69714.145696] [8909] hci_send_to_control: len 14 [69714.145710] [8909] smp_chan_destroy: [69714.145713] [8909] pairing_complete: status 3 [69714.145714] [8909] cmd_complete: sock ffff88010323ac00 [69714.145717] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 3 [69714.145719] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69714.145720] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 [69714.145722] [6515] hci_sock_recvmsg: sock ffff88005e75a080, sk ffff88010323ac00 [69714.145724] [6450] bt_sock_poll: sock ffff8801db6b4f00, sk ffff880160351c00 ... [69714.145735] [6515] hci_sock_recvmsg: sock ffff88005e75a080, sk ffff88010323ac00 [69714.145737] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 2 [69714.145739] [8909] l2cap_conn_del: hcon ffff88021f65a000 conn ffff880221005c00, err 13 [69714.145740] [6450] bt_sock_poll: sock ffff8801db6b5400, sk ffff88021e775000 [69714.145743] [6450] bt_sock_poll: sock ffff8801db6b5e00, sk ffff880160356000 [69714.145744] [8909] l2cap_chan_hold: chan ffff88005ede2c00 orig refcnt 3 [69714.145746] [6450] bt_sock_poll: sock ffff8800941ab700, sk ffff88005ede5800 [69714.145748] [8909] l2cap_chan_del: chan ffff88005ede2c00, conn ffff880221005c00, err 13 [69714.145749] [8909] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 4 [69714.145751] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 1 [69714.145754] [6450] bt_sock_poll: sock ffff8800941ab700, sk ffff88005ede5800 [69714.145756] [8909] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 3 [69714.145759] [8909] hci_chan_del: hci0 hcon ffff88021f65a000 chan ffff88020d60b1c0 [69714.145766] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69714.145787] [6515] hci_sock_release: sock ffff88005e75a080 sk ffff88010323ac00 [69714.146002] [6450] hci_sock_recvmsg: sock ffff88005e758780, sk ffff88010323d400 [69714.150795] [6450] l2cap_sock_release: sock ffff8800941ab700, sk ffff88005ede5800 [69714.150799] [6450] l2cap_sock_shutdown: sock ffff8800941ab700, sk ffff88005ede5800 [69714.150802] [6450] l2cap_chan_close: chan ffff88005ede2c00 state BT_CLOSED [69714.150805] [6450] l2cap_sock_kill: sk ffff88005ede5800 state BT_CLOSED [69714.150806] [6450] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 2 [69714.150808] [6450] l2cap_sock_destruct: sk ffff88005ede5800 [69714.150809] [6450] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 1 [69714.150811] [6450] l2cap_chan_destroy: chan ffff88005ede2c00 [69714.150970] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 ... [69714.151991] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 0 [69716.150339] [8909] hci_conn_timeout: hcon ffff88021f65a000 state BT_CONNECTED, refcnt -1 Signed-off-by: Lukasz Rymanowski Signed-off-by: Marcel Holtmann --- net/bluetooth/hci_conn.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index ca01d1861854..a7a27bc2c0b1 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -289,10 +289,20 @@ static void hci_conn_timeout(struct work_struct *work) { struct hci_conn *conn = container_of(work, struct hci_conn, disc_work.work); + int refcnt = atomic_read(&conn->refcnt); BT_DBG("hcon %p state %s", conn, state_to_string(conn->state)); - if (atomic_read(&conn->refcnt)) + WARN_ON(refcnt < 0); + + /* FIXME: It was observed that in pairing failed scenario, refcnt + * drops below 0. Probably this is because l2cap_conn_del calls + * l2cap_chan_del for each channel, and inside l2cap_chan_del conn is + * dropped. After that loop hci_chan_del is called which also drops + * conn. For now make sure that ACL is alive if refcnt is higher then 0, + * otherwise drop it. + */ + if (refcnt > 0) return; switch (conn->state) { -- cgit v1.2.3 From ccfb30001f37ace4690a74c27b4812cf054e123a Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Fri, 13 Jun 2014 13:02:11 +0900 Subject: f2fs: fix to report newly allocate region as extent Previous get_block in f2fs didn't report the newly allocated region which has NEW_ADDR. For reader, it should not report, but fiemap needs this. So, this patch introduces two get_block sharing core function. Signed-off-by: Jaegeuk Kim --- fs/f2fs/data.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c index 0924521306b4..f8cf619edb5f 100644 --- a/fs/f2fs/data.c +++ b/fs/f2fs/data.c @@ -608,8 +608,8 @@ static int __allocate_data_block(struct dnode_of_data *dn) * b. do not use extent cache for better performance * c. give the block addresses to blockdev */ -static int get_data_block(struct inode *inode, sector_t iblock, - struct buffer_head *bh_result, int create) +static int __get_data_block(struct inode *inode, sector_t iblock, + struct buffer_head *bh_result, int create, bool fiemap) { struct f2fs_sb_info *sbi = F2FS_SB(inode->i_sb); unsigned int blkbits = inode->i_sb->s_blocksize_bits; @@ -637,7 +637,7 @@ static int get_data_block(struct inode *inode, sector_t iblock, err = 0; goto unlock_out; } - if (dn.data_blkaddr == NEW_ADDR) + if (dn.data_blkaddr == NEW_ADDR && !fiemap) goto put_out; if (dn.data_blkaddr != NULL_ADDR) { @@ -671,7 +671,7 @@ get_next: err = 0; goto unlock_out; } - if (dn.data_blkaddr == NEW_ADDR) + if (dn.data_blkaddr == NEW_ADDR && !fiemap) goto put_out; end_offset = ADDRS_PER_PAGE(dn.node_page, F2FS_I(inode)); @@ -708,10 +708,23 @@ out: return err; } +static int get_data_block(struct inode *inode, sector_t iblock, + struct buffer_head *bh_result, int create) +{ + return __get_data_block(inode, iblock, bh_result, create, false); +} + +static int get_data_block_fiemap(struct inode *inode, sector_t iblock, + struct buffer_head *bh_result, int create) +{ + return __get_data_block(inode, iblock, bh_result, create, true); +} + int f2fs_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, u64 start, u64 len) { - return generic_block_fiemap(inode, fieinfo, start, len, get_data_block); + return generic_block_fiemap(inode, fieinfo, + start, len, get_data_block_fiemap); } static int f2fs_read_data_page(struct file *file, struct page *page) -- cgit v1.2.3 From ead432756ab2c76b1f1de742a1c8a06992cb98eb Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Fri, 13 Jun 2014 13:05:55 +0900 Subject: f2fs: recover fallocated data and its i_size together This patch arranges the f2fs_locks to cover the fallocated data and its i_size. Signed-off-by: Jaegeuk Kim --- fs/f2fs/file.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index c58e33075719..f6c4bdaaae86 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -659,13 +659,13 @@ static int expand_inode_data(struct inode *inode, loff_t offset, off_start = offset & (PAGE_CACHE_SIZE - 1); off_end = (offset + len) & (PAGE_CACHE_SIZE - 1); + f2fs_lock_op(sbi); + for (index = pg_start; index <= pg_end; index++) { struct dnode_of_data dn; - f2fs_lock_op(sbi); set_new_dnode(&dn, inode, NULL, NULL, 0); ret = f2fs_reserve_block(&dn, index); - f2fs_unlock_op(sbi); if (ret) break; @@ -683,8 +683,9 @@ static int expand_inode_data(struct inode *inode, loff_t offset, i_size_read(inode) < new_size) { i_size_write(inode, new_size); mark_inode_dirty(inode); - f2fs_write_inode(inode, NULL); + update_inode_page(inode); } + f2fs_unlock_op(sbi); return ret; } -- cgit v1.2.3 From 98397ff3cddcfdedd2ba1701bd30a73c1d733769 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Fri, 13 Jun 2014 13:07:31 +0900 Subject: f2fs: fix not to allocate unnecessary blocks during fallocate This patch fixes the fallocate bug like below. (See xfstests/255) In fallocate(fd, 0, 20480), expand_inode_data processes for (index = pg_start; index <= pg_end; index++) { f2fs_reserve_block(); ... } So, even though fallocate requests 20480, 5 blocks, f2fs allocates 6 blocks including pg_end. So, this patch adds one condition to avoid block allocation. Signed-off-by: Jaegeuk Kim --- fs/f2fs/file.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index f6c4bdaaae86..7d8b96275092 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -664,11 +664,14 @@ static int expand_inode_data(struct inode *inode, loff_t offset, for (index = pg_start; index <= pg_end; index++) { struct dnode_of_data dn; + if (index == pg_end && !off_end) + goto noalloc; + set_new_dnode(&dn, inode, NULL, NULL, 0); ret = f2fs_reserve_block(&dn, index); if (ret) break; - +noalloc: if (pg_start == pg_end) new_size = offset + len; else if (index == pg_start && off_start) -- cgit v1.2.3 From 744462a91ecf5d1ec64857488bf99000ef626921 Mon Sep 17 00:00:00 2001 From: Max Stepanov Date: Tue, 10 Jun 2014 20:00:08 +0300 Subject: mac80211: WEP extra head/tail room in ieee80211_send_auth After skb allocation and call to ieee80211_wep_encrypt in ieee80211_send_auth the flow fails with a warning in ieee80211_wep_add_iv on verification of available head/tailroom needed for WEP_IV and WEP_ICV. Signed-off-by: Max Stepanov Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/mac80211/util.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 6886601afe1c..a6cda52ed920 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1096,11 +1096,12 @@ void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata, int err; /* 24 + 6 = header + auth_algo + auth_transaction + status_code */ - skb = dev_alloc_skb(local->hw.extra_tx_headroom + 24 + 6 + extra_len); + skb = dev_alloc_skb(local->hw.extra_tx_headroom + IEEE80211_WEP_IV_LEN + + 24 + 6 + extra_len + IEEE80211_WEP_ICV_LEN); if (!skb) return; - skb_reserve(skb, local->hw.extra_tx_headroom); + skb_reserve(skb, local->hw.extra_tx_headroom + IEEE80211_WEP_IV_LEN); mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24 + 6); memset(mgmt, 0, 24 + 6); -- cgit v1.2.3 From e33e2241e272eddc38339692500bd1c7d8753a77 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 23 Jun 2014 11:06:16 +0200 Subject: Revert "cfg80211: Use 5MHz bandwidth by default when checking usable channels" This reverts commit 8eca1fb692cc9557f386eddce75c300a3855d11a. Felix notes that this broke regulatory, leaving channel 12 open for AP operation in the US regulatory domain where it isn't permitted. Link: http://mid.gmane.org/53A6C0FF.9090104@openwrt.org Reported-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/wireless/reg.c | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 558b0e3a02d8..1afdf45db38f 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -935,7 +935,7 @@ freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq, if (!band_rule_found) band_rule_found = freq_in_rule_band(fr, center_freq); - bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(5)); + bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(20)); if (band_rule_found && bw_fits) return rr; @@ -1019,10 +1019,10 @@ static void chan_reg_rule_print_dbg(const struct ieee80211_regdomain *regd, } #endif -/* Find an ieee80211_reg_rule such that a 5MHz channel with frequency - * chan->center_freq fits there. - * If there is no such reg_rule, disable the channel, otherwise set the - * flags corresponding to the bandwidths allowed in the particular reg_rule +/* + * Note that right now we assume the desired channel bandwidth + * is always 20 MHz for each individual channel (HT40 uses 20 MHz + * per channel, the primary and the extension channel). */ static void handle_channel(struct wiphy *wiphy, enum nl80211_reg_initiator initiator, @@ -1083,12 +1083,8 @@ static void handle_channel(struct wiphy *wiphy, if (reg_rule->flags & NL80211_RRF_AUTO_BW) max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule); - if (max_bandwidth_khz < MHZ_TO_KHZ(10)) - bw_flags = IEEE80211_CHAN_NO_10MHZ; - if (max_bandwidth_khz < MHZ_TO_KHZ(20)) - bw_flags |= IEEE80211_CHAN_NO_20MHZ; if (max_bandwidth_khz < MHZ_TO_KHZ(40)) - bw_flags |= IEEE80211_CHAN_NO_HT40; + bw_flags = IEEE80211_CHAN_NO_HT40; if (max_bandwidth_khz < MHZ_TO_KHZ(80)) bw_flags |= IEEE80211_CHAN_NO_80MHZ; if (max_bandwidth_khz < MHZ_TO_KHZ(160)) @@ -1522,12 +1518,8 @@ static void handle_channel_custom(struct wiphy *wiphy, if (reg_rule->flags & NL80211_RRF_AUTO_BW) max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule); - if (max_bandwidth_khz < MHZ_TO_KHZ(10)) - bw_flags = IEEE80211_CHAN_NO_10MHZ; - if (max_bandwidth_khz < MHZ_TO_KHZ(20)) - bw_flags |= IEEE80211_CHAN_NO_20MHZ; if (max_bandwidth_khz < MHZ_TO_KHZ(40)) - bw_flags |= IEEE80211_CHAN_NO_HT40; + bw_flags = IEEE80211_CHAN_NO_HT40; if (max_bandwidth_khz < MHZ_TO_KHZ(80)) bw_flags |= IEEE80211_CHAN_NO_80MHZ; if (max_bandwidth_khz < MHZ_TO_KHZ(160)) -- cgit v1.2.3 From 0ce12026d6ea4a24d52ddcde36b9643f2e26d560 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 17 Jun 2014 13:07:02 +0300 Subject: cfg80211: fix elapsed_jiffies calculation MAX_JIFFY_OFFSET has no meaning when calculating the elapsed jiffies, as jiffies run out until ULONG_MAX. This miscalculation results in erroneous values in case of a wrap-around. Signed-off-by: Eliad Peller Signed-off-by: Johannes Berg --- net/wireless/core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/wireless/core.h b/net/wireless/core.h index e9afbf10e756..7e3a3cef7df9 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -424,7 +424,7 @@ static inline unsigned int elapsed_jiffies_msecs(unsigned long start) if (end >= start) return jiffies_to_msecs(end - start); - return jiffies_to_msecs(end + (MAX_JIFFY_OFFSET - start) + 1); + return jiffies_to_msecs(end + (ULONG_MAX - start) + 1); } void -- cgit v1.2.3 From 48439d501e3d9e8634bdc0c418e066870039599d Mon Sep 17 00:00:00 2001 From: Loic Poulain Date: Mon, 23 Jun 2014 17:42:44 +0200 Subject: Bluetooth: Ignore H5 non-link packets in non-active state When detecting a non-link packet, h5_reset_rx() frees the Rx skb. Not returning after that will cause the upcoming h5_rx_payload() call to dereference a now NULL Rx skb and trigger a kernel oops. Signed-off-by: Loic Poulain Signed-off-by: Marcel Holtmann Cc: stable@vger.kernel.org --- drivers/bluetooth/hci_h5.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c index 04680ead9275..fede8ca7147c 100644 --- a/drivers/bluetooth/hci_h5.c +++ b/drivers/bluetooth/hci_h5.c @@ -406,6 +406,7 @@ static int h5_rx_3wire_hdr(struct hci_uart *hu, unsigned char c) H5_HDR_PKT_TYPE(hdr) != HCI_3WIRE_LINK_PKT) { BT_ERR("Non-link packet received in non-active state"); h5_reset_rx(h5); + return 0; } h5->rx_func = h5_rx_payload; -- cgit v1.2.3 From 546a9d8519ed137b2804a3f5a3659003039dd49c Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Thu, 19 Jun 2014 14:57:10 -0700 Subject: rcu: Export debug_init_rcu_head() and and debug_init_rcu_head() Currently, call_rcu() relies on implicit allocation and initialization for the debug-objects handling of RCU callbacks. If you hammer the kernel hard enough with Sasha's modified version of trinity, you can end up with the sl*b allocators recursing into themselves via this implicit call_rcu() allocation. This commit therefore exports the debug_init_rcu_head() and debug_rcu_head_free() functions, which permits the allocators to allocated and pre-initialize the debug-objects information, so that there no longer any need for call_rcu() to do that initialization, which in turn prevents the recursion into the memory allocators. Reported-by: Sasha Levin Suggested-by: Thomas Gleixner Signed-off-by: Paul E. McKenney Acked-by: Thomas Gleixner Looks-good-to: Christoph Lameter --- include/linux/rcupdate.h | 10 ++++++++++ kernel/rcu/update.c | 4 ++-- 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 5a75d19aa661..13bbfbde41b9 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -358,9 +358,19 @@ void wait_rcu_gp(call_rcu_func_t crf); * initialization. */ #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD +void init_rcu_head(struct rcu_head *head); +void destroy_rcu_head(struct rcu_head *head); void init_rcu_head_on_stack(struct rcu_head *head); void destroy_rcu_head_on_stack(struct rcu_head *head); #else /* !CONFIG_DEBUG_OBJECTS_RCU_HEAD */ +static inline void init_rcu_head(struct rcu_head *head) +{ +} + +static inline void destroy_rcu_head(struct rcu_head *head) +{ +} + static inline void init_rcu_head_on_stack(struct rcu_head *head) { } diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c index a2aeb4df0f60..0fb691e63ce6 100644 --- a/kernel/rcu/update.c +++ b/kernel/rcu/update.c @@ -200,12 +200,12 @@ void wait_rcu_gp(call_rcu_func_t crf) EXPORT_SYMBOL_GPL(wait_rcu_gp); #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD -static inline void debug_init_rcu_head(struct rcu_head *head) +void init_rcu_head(struct rcu_head *head) { debug_object_init(head, &rcuhead_debug_descr); } -static inline void debug_rcu_head_free(struct rcu_head *head) +void destroy_rcu_head(struct rcu_head *head) { debug_object_free(head, &rcuhead_debug_descr); } -- cgit v1.2.3 From 4a81e8328d3791a4f99bf5b436d050f6dc5ffea3 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Fri, 20 Jun 2014 16:49:01 -0700 Subject: rcu: Reduce overhead of cond_resched() checks for RCU Commit ac1bea85781e (Make cond_resched() report RCU quiescent states) fixed a problem where a CPU looping in the kernel with but one runnable task would give RCU CPU stall warnings, even if the in-kernel loop contained cond_resched() calls. Unfortunately, in so doing, it introduced performance regressions in Anton Blanchard's will-it-scale "open1" test. The problem appears to be not so much the increased cond_resched() path length as an increase in the rate at which grace periods complete, which increased per-update grace-period overhead. This commit takes a different approach to fixing this bug, mainly by moving the RCU-visible quiescent state from cond_resched() to rcu_note_context_switch(), and by further reducing the check to a simple non-zero test of a single per-CPU variable. However, this approach requires that the force-quiescent-state processing send resched IPIs to the offending CPUs. These will be sent only once the grace period has reached an age specified by the boot/sysfs parameter rcutree.jiffies_till_sched_qs, or once the grace period reaches an age halfway to the point at which RCU CPU stall warnings will be emitted, whichever comes first. Reported-by: Dave Hansen Signed-off-by: Paul E. McKenney Cc: Andi Kleen Cc: Christoph Lameter Cc: Mike Galbraith Cc: Eric Dumazet Reviewed-by: Josh Triplett [ paulmck: Made rcu_momentary_dyntick_idle() as suggested by the ktest build robot. Also fixed smp_mb() comment as noted by Oleg Nesterov. ] Merge with e552592e (Reduce overhead of cond_resched() checks for RCU) Signed-off-by: Paul E. McKenney --- Documentation/kernel-parameters.txt | 6 ++ include/linux/rcupdate.h | 36 ---------- kernel/rcu/tree.c | 140 ++++++++++++++++++++++++++++-------- kernel/rcu/tree.h | 6 +- kernel/rcu/tree_plugin.h | 2 +- kernel/rcu/update.c | 18 ----- kernel/sched/core.c | 7 +- 7 files changed, 125 insertions(+), 90 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 6eaa9cdb7094..910c3829f81d 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2785,6 +2785,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. leaf rcu_node structure. Useful for very large systems. + rcutree.jiffies_till_sched_qs= [KNL] + Set required age in jiffies for a + given grace period before RCU starts + soliciting quiescent-state help from + rcu_note_context_switch(). + rcutree.jiffies_till_first_fqs= [KNL] Set delay from grace-period initialization to first attempt to force quiescent states. diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 13bbfbde41b9..6a94cc8b1ca0 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -44,7 +44,6 @@ #include #include #include -#include #include extern int rcu_expedited; /* for sysctl */ @@ -299,41 +298,6 @@ static inline void rcu_user_hooks_switch(struct task_struct *prev, bool __rcu_is_watching(void); #endif /* #if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) || defined(CONFIG_SMP) */ -/* - * Hooks for cond_resched() and friends to avoid RCU CPU stall warnings. - */ - -#define RCU_COND_RESCHED_LIM 256 /* ms vs. 100s of ms. */ -DECLARE_PER_CPU(int, rcu_cond_resched_count); -void rcu_resched(void); - -/* - * Is it time to report RCU quiescent states? - * - * Note unsynchronized access to rcu_cond_resched_count. Yes, we might - * increment some random CPU's count, and possibly also load the result from - * yet another CPU's count. We might even clobber some other CPU's attempt - * to zero its counter. This is all OK because the goal is not precision, - * but rather reasonable amortization of rcu_note_context_switch() overhead - * and extremely high probability of avoiding RCU CPU stall warnings. - * Note that this function has to be preempted in just the wrong place, - * many thousands of times in a row, for anything bad to happen. - */ -static inline bool rcu_should_resched(void) -{ - return raw_cpu_inc_return(rcu_cond_resched_count) >= - RCU_COND_RESCHED_LIM; -} - -/* - * Report quiscent states to RCU if it is time to do so. - */ -static inline void rcu_cond_resched(void) -{ - if (unlikely(rcu_should_resched())) - rcu_resched(); -} - /* * Infrastructure to implement the synchronize_() primitives in * TREE_RCU and rcu_barrier_() primitives in TINY_RCU. diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c index f1ba77363fbb..625d0b0cd75a 100644 --- a/kernel/rcu/tree.c +++ b/kernel/rcu/tree.c @@ -206,6 +206,70 @@ void rcu_bh_qs(int cpu) rdp->passed_quiesce = 1; } +static DEFINE_PER_CPU(int, rcu_sched_qs_mask); + +static DEFINE_PER_CPU(struct rcu_dynticks, rcu_dynticks) = { + .dynticks_nesting = DYNTICK_TASK_EXIT_IDLE, + .dynticks = ATOMIC_INIT(1), +#ifdef CONFIG_NO_HZ_FULL_SYSIDLE + .dynticks_idle_nesting = DYNTICK_TASK_NEST_VALUE, + .dynticks_idle = ATOMIC_INIT(1), +#endif /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */ +}; + +/* + * Let the RCU core know that this CPU has gone through the scheduler, + * which is a quiescent state. This is called when the need for a + * quiescent state is urgent, so we burn an atomic operation and full + * memory barriers to let the RCU core know about it, regardless of what + * this CPU might (or might not) do in the near future. + * + * We inform the RCU core by emulating a zero-duration dyntick-idle + * period, which we in turn do by incrementing the ->dynticks counter + * by two. + */ +static void rcu_momentary_dyntick_idle(void) +{ + unsigned long flags; + struct rcu_data *rdp; + struct rcu_dynticks *rdtp; + int resched_mask; + struct rcu_state *rsp; + + local_irq_save(flags); + + /* + * Yes, we can lose flag-setting operations. This is OK, because + * the flag will be set again after some delay. + */ + resched_mask = raw_cpu_read(rcu_sched_qs_mask); + raw_cpu_write(rcu_sched_qs_mask, 0); + + /* Find the flavor that needs a quiescent state. */ + for_each_rcu_flavor(rsp) { + rdp = raw_cpu_ptr(rsp->rda); + if (!(resched_mask & rsp->flavor_mask)) + continue; + smp_mb(); /* rcu_sched_qs_mask before cond_resched_completed. */ + if (ACCESS_ONCE(rdp->mynode->completed) != + ACCESS_ONCE(rdp->cond_resched_completed)) + continue; + + /* + * Pretend to be momentarily idle for the quiescent state. + * This allows the grace-period kthread to record the + * quiescent state, with no need for this CPU to do anything + * further. + */ + rdtp = this_cpu_ptr(&rcu_dynticks); + smp_mb__before_atomic(); /* Earlier stuff before QS. */ + atomic_add(2, &rdtp->dynticks); /* QS. */ + smp_mb__after_atomic(); /* Later stuff after QS. */ + break; + } + local_irq_restore(flags); +} + /* * Note a context switch. This is a quiescent state for RCU-sched, * and requires special handling for preemptible RCU. @@ -216,19 +280,12 @@ void rcu_note_context_switch(int cpu) trace_rcu_utilization(TPS("Start context switch")); rcu_sched_qs(cpu); rcu_preempt_note_context_switch(cpu); + if (unlikely(raw_cpu_read(rcu_sched_qs_mask))) + rcu_momentary_dyntick_idle(); trace_rcu_utilization(TPS("End context switch")); } EXPORT_SYMBOL_GPL(rcu_note_context_switch); -static DEFINE_PER_CPU(struct rcu_dynticks, rcu_dynticks) = { - .dynticks_nesting = DYNTICK_TASK_EXIT_IDLE, - .dynticks = ATOMIC_INIT(1), -#ifdef CONFIG_NO_HZ_FULL_SYSIDLE - .dynticks_idle_nesting = DYNTICK_TASK_NEST_VALUE, - .dynticks_idle = ATOMIC_INIT(1), -#endif /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */ -}; - static long blimit = 10; /* Maximum callbacks per rcu_do_batch. */ static long qhimark = 10000; /* If this many pending, ignore blimit. */ static long qlowmark = 100; /* Once only this many pending, use blimit. */ @@ -243,6 +300,13 @@ static ulong jiffies_till_next_fqs = ULONG_MAX; module_param(jiffies_till_first_fqs, ulong, 0644); module_param(jiffies_till_next_fqs, ulong, 0644); +/* + * How long the grace period must be before we start recruiting + * quiescent-state help from rcu_note_context_switch(). + */ +static ulong jiffies_till_sched_qs = HZ / 20; +module_param(jiffies_till_sched_qs, ulong, 0644); + static bool rcu_start_gp_advanced(struct rcu_state *rsp, struct rcu_node *rnp, struct rcu_data *rdp); static void force_qs_rnp(struct rcu_state *rsp, @@ -853,6 +917,7 @@ static int rcu_implicit_dynticks_qs(struct rcu_data *rdp, bool *isidle, unsigned long *maxj) { unsigned int curr; + int *rcrmp; unsigned int snap; curr = (unsigned int)atomic_add_return(0, &rdp->dynticks->dynticks); @@ -893,27 +958,43 @@ static int rcu_implicit_dynticks_qs(struct rcu_data *rdp, } /* - * There is a possibility that a CPU in adaptive-ticks state - * might run in the kernel with the scheduling-clock tick disabled - * for an extended time period. Invoke rcu_kick_nohz_cpu() to - * force the CPU to restart the scheduling-clock tick in this - * CPU is in this state. - */ - rcu_kick_nohz_cpu(rdp->cpu); - - /* - * Alternatively, the CPU might be running in the kernel - * for an extended period of time without a quiescent state. - * Attempt to force the CPU through the scheduler to gain the - * needed quiescent state, but only if the grace period has gone - * on for an uncommonly long time. If there are many stuck CPUs, - * we will beat on the first one until it gets unstuck, then move - * to the next. Only do this for the primary flavor of RCU. + * A CPU running for an extended time within the kernel can + * delay RCU grace periods. When the CPU is in NO_HZ_FULL mode, + * even context-switching back and forth between a pair of + * in-kernel CPU-bound tasks cannot advance grace periods. + * So if the grace period is old enough, make the CPU pay attention. + * Note that the unsynchronized assignments to the per-CPU + * rcu_sched_qs_mask variable are safe. Yes, setting of + * bits can be lost, but they will be set again on the next + * force-quiescent-state pass. So lost bit sets do not result + * in incorrect behavior, merely in a grace period lasting + * a few jiffies longer than it might otherwise. Because + * there are at most four threads involved, and because the + * updates are only once every few jiffies, the probability of + * lossage (and thus of slight grace-period extension) is + * quite low. + * + * Note that if the jiffies_till_sched_qs boot/sysfs parameter + * is set too high, we override with half of the RCU CPU stall + * warning delay. */ - if (rdp->rsp == rcu_state_p && + rcrmp = &per_cpu(rcu_sched_qs_mask, rdp->cpu); + if (ULONG_CMP_GE(jiffies, + rdp->rsp->gp_start + jiffies_till_sched_qs) || ULONG_CMP_GE(jiffies, rdp->rsp->jiffies_resched)) { - rdp->rsp->jiffies_resched += 5; - resched_cpu(rdp->cpu); + if (!(ACCESS_ONCE(*rcrmp) & rdp->rsp->flavor_mask)) { + ACCESS_ONCE(rdp->cond_resched_completed) = + ACCESS_ONCE(rdp->mynode->completed); + smp_mb(); /* ->cond_resched_completed before *rcrmp. */ + ACCESS_ONCE(*rcrmp) = + ACCESS_ONCE(*rcrmp) + rdp->rsp->flavor_mask; + resched_cpu(rdp->cpu); /* Force CPU into scheduler. */ + rdp->rsp->jiffies_resched += 5; /* Enable beating. */ + } else if (ULONG_CMP_GE(jiffies, rdp->rsp->jiffies_resched)) { + /* Time to beat on that CPU again! */ + resched_cpu(rdp->cpu); /* Force CPU into scheduler. */ + rdp->rsp->jiffies_resched += 5; /* Re-enable beating. */ + } } return 0; @@ -3491,6 +3572,7 @@ static void __init rcu_init_one(struct rcu_state *rsp, "rcu_node_fqs_1", "rcu_node_fqs_2", "rcu_node_fqs_3" }; /* Match MAX_RCU_LVLS */ + static u8 fl_mask = 0x1; int cpustride = 1; int i; int j; @@ -3509,6 +3591,8 @@ static void __init rcu_init_one(struct rcu_state *rsp, for (i = 1; i < rcu_num_lvls; i++) rsp->level[i] = rsp->level[i - 1] + rsp->levelcnt[i - 1]; rcu_init_levelspread(rsp); + rsp->flavor_mask = fl_mask; + fl_mask <<= 1; /* Initialize the elements themselves, starting from the leaves. */ diff --git a/kernel/rcu/tree.h b/kernel/rcu/tree.h index bf2c1e669691..0f69a79c5b7d 100644 --- a/kernel/rcu/tree.h +++ b/kernel/rcu/tree.h @@ -307,6 +307,9 @@ struct rcu_data { /* 4) reasons this CPU needed to be kicked by force_quiescent_state */ unsigned long dynticks_fqs; /* Kicked due to dynticks idle. */ unsigned long offline_fqs; /* Kicked due to being offline. */ + unsigned long cond_resched_completed; + /* Grace period that needs help */ + /* from cond_resched(). */ /* 5) __rcu_pending() statistics. */ unsigned long n_rcu_pending; /* rcu_pending() calls since boot. */ @@ -392,6 +395,7 @@ struct rcu_state { struct rcu_node *level[RCU_NUM_LVLS]; /* Hierarchy levels. */ u32 levelcnt[MAX_RCU_LVLS + 1]; /* # nodes in each level. */ u8 levelspread[RCU_NUM_LVLS]; /* kids/node in each level. */ + u8 flavor_mask; /* bit in flavor mask. */ struct rcu_data __percpu *rda; /* pointer of percu rcu_data. */ void (*call)(struct rcu_head *head, /* call_rcu() flavor. */ void (*func)(struct rcu_head *head)); @@ -563,7 +567,7 @@ static bool rcu_nocb_need_deferred_wakeup(struct rcu_data *rdp); static void do_nocb_deferred_wakeup(struct rcu_data *rdp); static void rcu_boot_init_nocb_percpu_data(struct rcu_data *rdp); static void rcu_spawn_nocb_kthreads(struct rcu_state *rsp); -static void rcu_kick_nohz_cpu(int cpu); +static void __maybe_unused rcu_kick_nohz_cpu(int cpu); static bool init_nocb_callback_list(struct rcu_data *rdp); static void rcu_sysidle_enter(struct rcu_dynticks *rdtp, int irq); static void rcu_sysidle_exit(struct rcu_dynticks *rdtp, int irq); diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h index cbc2c45265e2..02ac0fb186b8 100644 --- a/kernel/rcu/tree_plugin.h +++ b/kernel/rcu/tree_plugin.h @@ -2404,7 +2404,7 @@ static bool init_nocb_callback_list(struct rcu_data *rdp) * if an adaptive-ticks CPU is failing to respond to the current grace * period and has not be idle from an RCU perspective, kick it. */ -static void rcu_kick_nohz_cpu(int cpu) +static void __maybe_unused rcu_kick_nohz_cpu(int cpu) { #ifdef CONFIG_NO_HZ_FULL if (tick_nohz_full_cpu(cpu)) diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c index 0fb691e63ce6..bc7883570530 100644 --- a/kernel/rcu/update.c +++ b/kernel/rcu/update.c @@ -350,21 +350,3 @@ static int __init check_cpu_stall_init(void) early_initcall(check_cpu_stall_init); #endif /* #ifdef CONFIG_RCU_STALL_COMMON */ - -/* - * Hooks for cond_resched() and friends to avoid RCU CPU stall warnings. - */ - -DEFINE_PER_CPU(int, rcu_cond_resched_count); - -/* - * Report a set of RCU quiescent states, for use by cond_resched() - * and friends. Out of line due to being called infrequently. - */ -void rcu_resched(void) -{ - preempt_disable(); - __this_cpu_write(rcu_cond_resched_count, 0); - rcu_note_context_switch(smp_processor_id()); - preempt_enable(); -} diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 3bdf01b494fe..bc1638b33449 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -4147,7 +4147,6 @@ static void __cond_resched(void) int __sched _cond_resched(void) { - rcu_cond_resched(); if (should_resched()) { __cond_resched(); return 1; @@ -4166,18 +4165,15 @@ EXPORT_SYMBOL(_cond_resched); */ int __cond_resched_lock(spinlock_t *lock) { - bool need_rcu_resched = rcu_should_resched(); int resched = should_resched(); int ret = 0; lockdep_assert_held(lock); - if (spin_needbreak(lock) || resched || need_rcu_resched) { + if (spin_needbreak(lock) || resched) { spin_unlock(lock); if (resched) __cond_resched(); - else if (unlikely(need_rcu_resched)) - rcu_resched(); else cpu_relax(); ret = 1; @@ -4191,7 +4187,6 @@ int __sched __cond_resched_softirq(void) { BUG_ON(!in_softirq()); - rcu_cond_resched(); /* BH disabled OK, just recording QSes. */ if (should_resched()) { local_bh_enable(); __cond_resched(); -- cgit v1.2.3 From bddbceb688c6d0decaabc7884fede319d02f96c8 Mon Sep 17 00:00:00 2001 From: Maxime Bizon Date: Mon, 23 Jun 2014 16:35:35 +0200 Subject: workqueue: fix dev_set_uevent_suppress() imbalance Uevents are suppressed during attributes registration, but never restored, so kobject_uevent() does nothing. Signed-off-by: Maxime Bizon Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org Fixes: 226223ab3c4118ddd10688cc2c131135848371ab --- kernel/workqueue.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 6203d2900877..6f5f9c7323f4 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -3284,6 +3284,7 @@ int workqueue_sysfs_register(struct workqueue_struct *wq) } } + dev_set_uevent_suppress(&wq_dev->dev, false); kobject_uevent(&wq_dev->dev.kobj, KOBJ_ADD); return 0; } -- cgit v1.2.3 From 89879413eba4d9f57b69f84a32fd085d54057df3 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Mon, 26 May 2014 18:44:35 +0300 Subject: iwlwifi: mvm: rework sched scan channel configuration The current sched scan channel configuration code configures all the supported channels for scanning. However, this can result in SYSASSERT in some cases, when the configured channel is disabled. Instead, configure only the channels given in the req struct, and set the channel_count field appropriately. While on it, change the code to use channel->hw_value instead of recalculating the channel number. Signed-off-by: Eliad Peller Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/scan.c | 65 ++++++++++----------------------- 1 file changed, 19 insertions(+), 46 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 4b6c7d4bd199..eac2b424f6a0 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -588,9 +588,7 @@ static void iwl_build_scan_cmd(struct iwl_mvm *mvm, struct iwl_scan_offload_cmd *scan, struct iwl_mvm_scan_params *params) { - scan->channel_count = - mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels + - mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels; + scan->channel_count = req->n_channels; scan->quiet_time = cpu_to_le16(IWL_ACTIVE_QUIET_TIME); scan->quiet_plcp_th = cpu_to_le16(IWL_PLCP_QUIET_THRESH); scan->good_CRC_th = IWL_GOOD_CRC_TH_DEFAULT; @@ -669,61 +667,37 @@ static void iwl_build_channel_cfg(struct iwl_mvm *mvm, struct cfg80211_sched_scan_request *req, struct iwl_scan_channel_cfg *channels, enum ieee80211_band band, - int *head, int *tail, + int *head, u32 ssid_bitmap, struct iwl_mvm_scan_params *params) { - struct ieee80211_supported_band *s_band; - int n_channels = req->n_channels; - int i, j, index = 0; - bool partial; + int i, index = 0; - /* - * We have to configure all supported channels, even if we don't want to - * scan on them, but we have to send channels in the order that we want - * to scan. So add requested channels to head of the list and others to - * the end. - */ - s_band = &mvm->nvm_data->bands[band]; - - for (i = 0; i < s_band->n_channels && *head <= *tail; i++) { - partial = false; - for (j = 0; j < n_channels; j++) - if (s_band->channels[i].center_freq == - req->channels[j]->center_freq) { - index = *head; - (*head)++; - /* - * Channels that came with the request will be - * in partial scan . - */ - partial = true; - break; - } - if (!partial) { - index = *tail; - (*tail)--; - } - channels->channel_number[index] = - cpu_to_le16(ieee80211_frequency_to_channel( - s_band->channels[i].center_freq)); + for (i = 0; i < req->n_channels; i++) { + struct ieee80211_channel *chan = req->channels[i]; + + if (chan->band != band) + continue; + + index = *head; + (*head)++; + + channels->channel_number[index] = cpu_to_le16(chan->hw_value); channels->dwell_time[index][0] = params->dwell[band].active; channels->dwell_time[index][1] = params->dwell[band].passive; channels->iter_count[index] = cpu_to_le16(1); channels->iter_interval[index] = 0; - if (!(s_band->channels[i].flags & IEEE80211_CHAN_NO_IR)) + if (!(chan->flags & IEEE80211_CHAN_NO_IR)) channels->type[index] |= cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_ACTIVE); channels->type[index] |= - cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_FULL); - if (partial) - channels->type[index] |= - cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_PARTIAL); + cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_FULL | + IWL_SCAN_OFFLOAD_CHANNEL_PARTIAL); - if (s_band->channels[i].flags & IEEE80211_CHAN_NO_HT40) + if (chan->flags & IEEE80211_CHAN_NO_HT40) channels->type[index] |= cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_NARROW); @@ -740,7 +714,6 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm, int band_2ghz = mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels; int band_5ghz = mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels; int head = 0; - int tail = band_2ghz + band_5ghz - 1; u32 ssid_bitmap; int cmd_len; int ret; @@ -772,7 +745,7 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm, &scan_cfg->scan_cmd.tx_cmd[0], scan_cfg->data); iwl_build_channel_cfg(mvm, req, &scan_cfg->channel_cfg, - IEEE80211_BAND_2GHZ, &head, &tail, + IEEE80211_BAND_2GHZ, &head, ssid_bitmap, ¶ms); } if (band_5ghz) { @@ -782,7 +755,7 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm, scan_cfg->data + SCAN_OFFLOAD_PROBE_REQ_SIZE); iwl_build_channel_cfg(mvm, req, &scan_cfg->channel_cfg, - IEEE80211_BAND_5GHZ, &head, &tail, + IEEE80211_BAND_5GHZ, &head, ssid_bitmap, ¶ms); } -- cgit v1.2.3 From 02df00eb0019e7d15a1fcddebe4d020226c1ccda Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 10 Jun 2014 14:06:25 +0200 Subject: nl80211: move set_qos_map command into split state The non-split wiphy state shouldn't be increased in size so move the new set_qos_map command into the split if statement. Cc: stable@vger.kernel.org (3.14+) Fixes: fa9ffc745610 ("cfg80211: Add support for QoS mapping") Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index ba4f1723c83a..6668daf69326 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1497,18 +1497,17 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev, } CMD(start_p2p_device, START_P2P_DEVICE); CMD(set_mcast_rate, SET_MCAST_RATE); +#ifdef CONFIG_NL80211_TESTMODE + CMD(testmode_cmd, TESTMODE); +#endif if (state->split) { CMD(crit_proto_start, CRIT_PROTOCOL_START); CMD(crit_proto_stop, CRIT_PROTOCOL_STOP); if (rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH) CMD(channel_switch, CHANNEL_SWITCH); + CMD(set_qos_map, SET_QOS_MAP); } - CMD(set_qos_map, SET_QOS_MAP); - -#ifdef CONFIG_NL80211_TESTMODE - CMD(testmode_cmd, TESTMODE); -#endif - + /* add into the if now */ #undef CMD if (rdev->ops->connect || rdev->ops->auth) { -- cgit v1.2.3 From b3c063ae7279981f7161e63b44f214c62f122b32 Mon Sep 17 00:00:00 2001 From: Oren Givon Date: Sun, 25 May 2014 16:31:58 +0300 Subject: iwlwifi: update the 7265 series HW IDs Add one more 7265 series HW ID. Edit one existing 7265 series HW ID. CC: [3.13+] Signed-off-by: Oren Givon Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/pcie/drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index 7091a18d5a72..98950e45c7b0 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -367,6 +367,7 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { {IWL_PCI_DEVICE(0x095A, 0x5012, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5412, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5410, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x5510, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5400, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x1010, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5000, iwl7265_2n_cfg)}, @@ -380,7 +381,7 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { {IWL_PCI_DEVICE(0x095A, 0x9110, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9112, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9210, iwl7265_2ac_cfg)}, - {IWL_PCI_DEVICE(0x095A, 0x9200, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095B, 0x9200, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9510, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9310, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9410, iwl7265_2ac_cfg)}, -- cgit v1.2.3 From a42c9fcc4a88cdd246fab3bcf06c4487afee3d88 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Thu, 8 May 2014 16:17:31 +0300 Subject: Revert "iwlwifi: remove IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT flag" This reverts commit dc9a19296a872644f19a06d8eeb5db222d327b41. 3610 cards don't support UAPSD. Signed-off-by: Arik Nemtsov Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-fw.h | 1 + drivers/net/wireless/iwlwifi/mvm/mac80211.c | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h index 0aa7c0085c9f..b1a33322b9ba 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw.h @@ -88,6 +88,7 @@ * P2P client interfaces simultaneously if they are in different bindings. * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and * P2P client interfaces simultaneously if they are in same bindings. + * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering. * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 7215f5980186..1cef708cb74d 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -303,6 +303,13 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) hw->uapsd_max_sp_len = IWL_UAPSD_MAX_SP; } + if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT && + !iwlwifi_mod_params.uapsd_disable) { + hw->flags |= IEEE80211_HW_SUPPORTS_UAPSD; + hw->uapsd_queues = IWL_UAPSD_AC_INFO; + hw->uapsd_max_sp_len = IWL_UAPSD_MAX_SP; + } + hw->sta_data_size = sizeof(struct iwl_mvm_sta); hw->vif_data_size = sizeof(struct iwl_mvm_vif); hw->chanctx_data_size = sizeof(u16); -- cgit v1.2.3 From e48393e8cf99f2b070b0a1c3d79411ccddcba2df Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Thu, 22 May 2014 11:19:02 +0300 Subject: iwlwifi: mvm: Fix broadcast filtering Current code did not allow sending the broadcast filtering command for P2P Client interfaces. However, this was not enough, since once broadcast filtering command was issued over the station interface after the P2P Client connected, the command also attached the filters to the P2P Client MAC which is not allowed (FW ASSERT 1063). Fix this skipping P2P Client interfaces when constructing the broadcast filtering command Signed-off-by: Ilan Peer Reviewed-by: ArikX Nemtsov Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 1cef708cb74d..9bfb90680cdc 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1166,8 +1166,12 @@ static void iwl_mvm_bcast_filter_iterator(void *_data, u8 *mac, bcast_mac = &cmd->macs[mvmvif->id]; - /* enable filtering only for associated stations */ - if (vif->type != NL80211_IFTYPE_STATION || !vif->bss_conf.assoc) + /* + * enable filtering only for associated stations, but not for P2P + * Clients + */ + if (vif->type != NL80211_IFTYPE_STATION || vif->p2p || + !vif->bss_conf.assoc) return; bcast_mac->default_discard = 1; @@ -1244,10 +1248,6 @@ static int iwl_mvm_configure_bcast_filter(struct iwl_mvm *mvm, if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BCAST_FILTERING)) return 0; - /* bcast filtering isn't supported for P2P client */ - if (vif->p2p) - return 0; - if (!iwl_mvm_bcast_filter_build_cmd(mvm, &cmd)) return 0; -- cgit v1.2.3 From 72cbaa3d2f563d7b48c9f8aef47ec9aa3a31adf2 Mon Sep 17 00:00:00 2001 From: Kefeng Wang Date: Tue, 24 Jun 2014 16:54:23 -0400 Subject: ahci: disable ncq feature for hisilicon sata NCQ feature is unsupported on hisilicon sata controller, so disable it. This version of IP is used by hip04 and hix5hd2 soc. tj: "|=" was replaced with "=" for no reason. Restored "|=". Signed-off-by: Kefeng Wang Sigend-off-by: Tejun Heo --- drivers/ata/ahci_platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index ebe505c17763..b10d81ddb528 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -58,7 +58,7 @@ static int ahci_probe(struct platform_device *pdev) } if (of_device_is_compatible(dev->of_node, "hisilicon,hisi-ahci")) - hflags |= AHCI_HFLAG_NO_FBS; + hflags |= AHCI_HFLAG_NO_FBS | AHCI_HFLAG_NO_NCQ; rc = ahci_platform_init_host(pdev, hpriv, &ahci_port_info, hflags, 0, 0); -- cgit v1.2.3 From f118ae5901172dacc4f272acf5eccfba06e8d221 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 23 Jun 2014 12:59:08 +0100 Subject: ata: ahci_imx: warn when disabling ahci link When the AHCI link is disabled, it can't be re-enabled except by resetting the entire SoC. Rather than doing this silently print some kernel messages to inform the user, along with how to avoid this. tj: Put a long printf format string on a single line. Signed-off-by: Russell King Signed-off-by: Tejun Heo --- drivers/ata/ahci_imx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c index 4384a7d72133..cac4360f272a 100644 --- a/drivers/ata/ahci_imx.c +++ b/drivers/ata/ahci_imx.c @@ -326,6 +326,9 @@ static void ahci_imx_error_handler(struct ata_port *ap) writel(reg_val | IMX_P0PHYCR_TEST_PDDQ, mmio + IMX_P0PHYCR); imx_sata_disable(hpriv); imxpriv->no_device = true; + + dev_info(ap->dev, "no device found, disabling link.\n"); + dev_info(ap->dev, "pass " MODULE_PARAM_PREFIX ".hotplug=1 to enable hotplug\n"); } static int ahci_imx_softreset(struct ata_link *link, unsigned int *class, -- cgit v1.2.3 From 391acf970d21219a2a5446282d3b20eace0c0d7a Mon Sep 17 00:00:00 2001 From: Gu Zheng Date: Wed, 25 Jun 2014 09:57:18 +0800 Subject: cpuset,mempolicy: fix sleeping function called from invalid context When runing with the kernel(3.15-rc7+), the follow bug occurs: [ 9969.258987] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:586 [ 9969.359906] in_atomic(): 1, irqs_disabled(): 0, pid: 160655, name: python [ 9969.441175] INFO: lockdep is turned off. [ 9969.488184] CPU: 26 PID: 160655 Comm: python Tainted: G A 3.15.0-rc7+ #85 [ 9969.581032] Hardware name: FUJITSU-SV PRIMEQUEST 1800E/SB, BIOS PRIMEQUEST 1000 Series BIOS Version 1.39 11/16/2012 [ 9969.706052] ffffffff81a20e60 ffff8803e941fbd0 ffffffff8162f523 ffff8803e941fd18 [ 9969.795323] ffff8803e941fbe0 ffffffff8109995a ffff8803e941fc58 ffffffff81633e6c [ 9969.884710] ffffffff811ba5dc ffff880405c6b480 ffff88041fdd90a0 0000000000002000 [ 9969.974071] Call Trace: [ 9970.003403] [] dump_stack+0x4d/0x66 [ 9970.065074] [] __might_sleep+0xfa/0x130 [ 9970.130743] [] mutex_lock_nested+0x3c/0x4f0 [ 9970.200638] [] ? kmem_cache_alloc+0x1bc/0x210 [ 9970.272610] [] cpuset_mems_allowed+0x27/0x140 [ 9970.344584] [] ? __mpol_dup+0x63/0x150 [ 9970.409282] [] __mpol_dup+0xe5/0x150 [ 9970.471897] [] ? __mpol_dup+0x63/0x150 [ 9970.536585] [] ? copy_process.part.23+0x606/0x1d40 [ 9970.613763] [] ? trace_hardirqs_on+0xd/0x10 [ 9970.683660] [] ? monotonic_to_bootbased+0x2f/0x50 [ 9970.759795] [] copy_process.part.23+0x670/0x1d40 [ 9970.834885] [] do_fork+0xd8/0x380 [ 9970.894375] [] ? __audit_syscall_entry+0x9c/0xf0 [ 9970.969470] [] SyS_clone+0x16/0x20 [ 9971.030011] [] stub_clone+0x69/0x90 [ 9971.091573] [] ? system_call_fastpath+0x16/0x1b The cause is that cpuset_mems_allowed() try to take mutex_lock(&callback_mutex) under the rcu_read_lock(which was hold in __mpol_dup()). And in cpuset_mems_allowed(), the access to cpuset is under rcu_read_lock, so in __mpol_dup, we can reduce the rcu_read_lock protection region to protect the access to cpuset only in current_cpuset_is_being_rebound(). So that we can avoid this bug. This patch is a temporary solution that just addresses the bug mentioned above, can not fix the long-standing issue about cpuset.mems rebinding on fork(): "When the forker's task_struct is duplicated (which includes ->mems_allowed) and it races with an update to cpuset_being_rebound in update_tasks_nodemask() then the task's mems_allowed doesn't get updated. And the child task's mems_allowed can be wrong if the cpuset's nodemask changes before the child has been added to the cgroup's tasklist." Signed-off-by: Gu Zheng Acked-by: Li Zefan Signed-off-by: Tejun Heo Cc: stable --- kernel/cpuset.c | 8 +++++++- mm/mempolicy.c | 2 -- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index f6b33c696224..d3df02e76643 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -1181,7 +1181,13 @@ done: int current_cpuset_is_being_rebound(void) { - return task_cs(current) == cpuset_being_rebound; + int ret; + + rcu_read_lock(); + ret = task_cs(current) == cpuset_being_rebound; + rcu_read_unlock(); + + return ret; } static int update_relax_domain_level(struct cpuset *cs, s64 val) diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 284974230459..9a3783ccff67 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -2145,7 +2145,6 @@ struct mempolicy *__mpol_dup(struct mempolicy *old) } else *new = *old; - rcu_read_lock(); if (current_cpuset_is_being_rebound()) { nodemask_t mems = cpuset_mems_allowed(current); if (new->flags & MPOL_F_REBINDING) @@ -2153,7 +2152,6 @@ struct mempolicy *__mpol_dup(struct mempolicy *old) else mpol_rebind_policy(new, &mems, MPOL_REBIND_ONCE); } - rcu_read_unlock(); atomic_set(&new->refcnt, 1); return new; } -- cgit v1.2.3 From cfe82d4f45c7cc39332a2be7c4c1d3bf279bbd3d Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Mon, 23 Jun 2014 19:41:05 +0300 Subject: crypto: sha512_ssse3 - fix byte count to bit count conversion Byte-to-bit-count computation is only partly converted to big-endian and is mixing in CPU-endian values. Problem was noticed by sparce with warning: CHECK arch/x86/crypto/sha512_ssse3_glue.c arch/x86/crypto/sha512_ssse3_glue.c:144:19: warning: restricted __be64 degrades to integer arch/x86/crypto/sha512_ssse3_glue.c:144:17: warning: incorrect type in assignment (different base types) arch/x86/crypto/sha512_ssse3_glue.c:144:17: expected restricted __be64 arch/x86/crypto/sha512_ssse3_glue.c:144:17: got unsigned long long Cc: Signed-off-by: Jussi Kivilinna Acked-by: Tim Chen Signed-off-by: Herbert Xu --- arch/x86/crypto/sha512_ssse3_glue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/crypto/sha512_ssse3_glue.c b/arch/x86/crypto/sha512_ssse3_glue.c index f30cd10293f0..8626b03e83b7 100644 --- a/arch/x86/crypto/sha512_ssse3_glue.c +++ b/arch/x86/crypto/sha512_ssse3_glue.c @@ -141,7 +141,7 @@ static int sha512_ssse3_final(struct shash_desc *desc, u8 *out) /* save number of bits */ bits[1] = cpu_to_be64(sctx->count[0] << 3); - bits[0] = cpu_to_be64(sctx->count[1] << 3) | sctx->count[0] >> 61; + bits[0] = cpu_to_be64(sctx->count[1] << 3 | sctx->count[0] >> 61); /* Pad out to 112 mod 128 and append length */ index = sctx->count[0] & 0x7f; -- cgit v1.2.3 From d76744a93246eccdca1106037e8ee29debf48277 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Fri, 20 Jun 2014 11:45:25 -0700 Subject: mwifiex: fix Tx timeout issue https://bugzilla.kernel.org/show_bug.cgi?id=70191 https://bugzilla.kernel.org/show_bug.cgi?id=77581 It is observed that sometimes Tx packet is downloaded without adding driver's txpd header. This results in firmware parsing garbage data as packet length. Sometimes firmware is unable to read the packet if length comes out as invalid. This stops further traffic and timeout occurs. The root cause is uninitialized fields in tx_info(skb->cb) of packet used to get garbage values. In this case if MWIFIEX_BUF_FLAG_REQUEUED_PKT flag is mistakenly set, txpd header was skipped. This patch makes sure that tx_info is correctly initialized to fix the problem. Cc: Reported-by: Andrew Wiley Reported-by: Linus Gasser Reported-by: Michael Hirsch Tested-by: Xinming Hu Signed-off-by: Amitkumar Karwar Signed-off-by: Maithili Hinge Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c index cbabc12fbda3..e91cd0fa5ca8 100644 --- a/drivers/net/wireless/mwifiex/main.c +++ b/drivers/net/wireless/mwifiex/main.c @@ -645,6 +645,7 @@ mwifiex_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) } tx_info = MWIFIEX_SKB_TXCB(skb); + memset(tx_info, 0, sizeof(*tx_info)); tx_info->bss_num = priv->bss_num; tx_info->bss_type = priv->bss_type; tx_info->pkt_len = skb->len; -- cgit v1.2.3 From c6bff5449fa78e1d524bb5b67b8ab82faf835bff Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 20 Jun 2014 22:19:25 +0200 Subject: brcmfmac: assign chip id and rev in bus interface after brcmf_usb_dlneeded The function brcmf_usb_dlneeded() queries the device to obtain the chip id and revision. So assigning these in bus interface before the call resulted in chip id and revision being zero. This was introduced by: commit 5b8045d484d0ef77d6aa9444023220c5671fa3fe Author: Arend van Spriel Date: Tue May 27 12:56:23 2014 +0200 brcmfmac: use asynchronous firmware request in USB Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/usb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 6db51a666f61..d06fcb05adf2 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -1184,8 +1184,6 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo) bus->bus_priv.usb = bus_pub; dev_set_drvdata(dev, bus); bus->ops = &brcmf_usb_bus_ops; - bus->chip = bus_pub->devid; - bus->chiprev = bus_pub->chiprev; bus->proto_type = BRCMF_PROTO_BCDC; bus->always_use_fws_queue = true; @@ -1194,6 +1192,9 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo) if (ret) goto fail; } + bus->chip = bus_pub->devid; + bus->chiprev = bus_pub->chiprev; + /* request firmware here */ brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), NULL, brcmf_usb_probe_phase2); -- cgit v1.2.3 From f14d1c24c64bec45c01b0bc7b0dde2e54a797662 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 30 May 2014 11:03:28 +0100 Subject: MAINTAINERS: Update Eduardo Valentin's email address Eduardo TI address is bouncing, but it looks like he's still contributing via his Gmail address. Cc: Eduardo Valentin Signed-off-by: Lee Jones Signed-off-by: Zhang Rui --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 3f2e171047b9..45bced732cf4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8969,7 +8969,7 @@ F: drivers/media/radio/radio-raremono.c THERMAL M: Zhang Rui -M: Eduardo Valentin +M: Eduardo Valentin L: linux-pm@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git @@ -8996,7 +8996,7 @@ S: Maintained F: drivers/platform/x86/thinkpad_acpi.c TI BANDGAP AND THERMAL DRIVER -M: Eduardo Valentin +M: Eduardo Valentin L: linux-pm@vger.kernel.org S: Supported F: drivers/thermal/ti-soc-thermal/ -- cgit v1.2.3 From 73413ffac3b713231dac466bca216f970042c5e5 Mon Sep 17 00:00:00 2001 From: Yijing Wang Date: Wed, 25 Jun 2014 12:22:56 +0800 Subject: bnx2x: Fix the MSI flags MSI-X should use PCI_MSIX_FLAGS not PCI_MSI_FLAGS. Signed-off-by: Yijing Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 2887034523e0..6a8b1453a1b9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12937,7 +12937,7 @@ static int bnx2x_get_num_non_def_sbs(struct pci_dev *pdev, int cnic_cnt) * without the default SB. * For VFs there is no default SB, then we return (index+1). */ - pci_read_config_word(pdev, pdev->msix_cap + PCI_MSI_FLAGS, &control); + pci_read_config_word(pdev, pdev->msix_cap + PCI_MSIX_FLAGS, &control); index = control & PCI_MSIX_FLAGS_QSIZE; -- cgit v1.2.3 From 3e215c8d1b6b772d107f1811b5ee8eae7a046fb4 Mon Sep 17 00:00:00 2001 From: James M Leddy Date: Wed, 25 Jun 2014 17:38:13 -0400 Subject: udp: Add MIB counters for rcvbuferrors Add MIB counters for rcvbuferrors in UDP to help diagnose problems. Signed-off-by: James M Leddy Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/udp.c | 5 ++++- net/ipv6/udp.c | 6 +++++- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index d92f94b7e402..7d5a8661df76 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1588,8 +1588,11 @@ int udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb) goto csum_error; - if (sk_rcvqueues_full(sk, skb, sk->sk_rcvbuf)) + if (sk_rcvqueues_full(sk, skb, sk->sk_rcvbuf)) { + UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_RCVBUFERRORS, + is_udplite); goto drop; + } rc = 0; diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 95c834799288..7092ff78fd84 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -674,8 +674,11 @@ int udpv6_queue_rcv_skb(struct sock *sk, struct sk_buff *skb) goto csum_error; } - if (sk_rcvqueues_full(sk, skb, sk->sk_rcvbuf)) + if (sk_rcvqueues_full(sk, skb, sk->sk_rcvbuf)) { + UDP6_INC_STATS_BH(sock_net(sk), + UDP_MIB_RCVBUFERRORS, is_udplite); goto drop; + } skb_dst_drop(skb); @@ -690,6 +693,7 @@ int udpv6_queue_rcv_skb(struct sock *sk, struct sk_buff *skb) bh_unlock_sock(sk); return rc; + csum_error: UDP6_INC_STATS_BH(sock_net(sk), UDP_MIB_CSUMERRORS, is_udplite); drop: -- cgit v1.2.3 From e940f5d6ba6a01f8dbb870854d5205d322452730 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Fri, 27 Jun 2014 09:57:53 +0800 Subject: ipv6: Fix MLD Query message check Based on RFC3810 6.2, we also need to check the hop limit and router alert option besides source address. Signed-off-by: Hangbin Liu Acked-by: YOSHIFUJI Hideaki Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/ipv6/mcast.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index 08b367c6b9cf..617f0958e164 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -1301,8 +1301,17 @@ int igmp6_event_query(struct sk_buff *skb) len = ntohs(ipv6_hdr(skb)->payload_len) + sizeof(struct ipv6hdr); len -= skb_network_header_len(skb); - /* Drop queries with not link local source */ - if (!(ipv6_addr_type(&ipv6_hdr(skb)->saddr) & IPV6_ADDR_LINKLOCAL)) + /* RFC3810 6.2 + * Upon reception of an MLD message that contains a Query, the node + * checks if the source address of the message is a valid link-local + * address, if the Hop Limit is set to 1, and if the Router Alert + * option is present in the Hop-By-Hop Options header of the IPv6 + * packet. If any of these checks fails, the packet is dropped. + */ + if (!(ipv6_addr_type(&ipv6_hdr(skb)->saddr) & IPV6_ADDR_LINKLOCAL) || + ipv6_hdr(skb)->hop_limit != 1 || + !(IP6CB(skb)->flags & IP6SKB_ROUTERALERT) || + IP6CB(skb)->ra != htons(IPV6_OPT_ROUTERALERT_MLD)) return -EINVAL; idev = __in6_dev_get(skb->dev); -- cgit v1.2.3 From e556756a6326d55dcbb476d471dcda36814fd696 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 9 Jun 2014 15:11:13 +0200 Subject: i2c: mux: pca954x: fix dependencies MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This driver causes the following randconfig build error: drivers/i2c/muxes/i2c-mux-pca954x.c: In function ‘pca954x_probe’: drivers/i2c/muxes/i2c-mux-pca954x.c:204:2: error: implicit declaration of function ‘devm_gpiod_get’ [-Werror=implicit-function-declaration] gpio = devm_gpiod_get(&client->dev, "reset"); ^ drivers/i2c/muxes/i2c-mux-pca954x.c:204:7: warning: assignment makes pointer from integer without a cast [enabled by default] gpio = devm_gpiod_get(&client->dev, "reset"); ^ drivers/i2c/muxes/i2c-mux-pca954x.c:206:3: error: implicit declaration of function ‘gpiod_direction_output’ [-Werror=implicit-function-declaration] gpiod_direction_output(gpio, 0); ^ cc1: some warnings being treated as errors make[3]: *** [drivers/i2c/muxes/i2c-mux-pca954x.o] Error 1 This is because it is getting compiled without gpiolib, so introduce an explicit dependency. Reported-by: Jim Davis Signed-off-by: Linus Walleij Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig index f7f9865b8b89..f6d313e528de 100644 --- a/drivers/i2c/muxes/Kconfig +++ b/drivers/i2c/muxes/Kconfig @@ -40,6 +40,7 @@ config I2C_MUX_PCA9541 config I2C_MUX_PCA954x tristate "Philips PCA954x I2C Mux/switches" + depends on GPIOLIB help If you say yes here you get support for the Philips PCA954x I2C mux/switch devices. -- cgit v1.2.3 From 098aebc30292c10b31f6aa58bf4fe2c4b26001f6 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 24 Jun 2014 09:25:28 +0530 Subject: i2c: sun6i-p2wi: Remove duplicate inclusion of module.h module.h was included twice. Signed-off-by: Sachin Kamat Acked-by: Boris BREZILLON Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-sun6i-p2wi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-sun6i-p2wi.c b/drivers/i2c/busses/i2c-sun6i-p2wi.c index 09de4fd12d57..4d75d4759709 100644 --- a/drivers/i2c/busses/i2c-sun6i-p2wi.c +++ b/drivers/i2c/busses/i2c-sun6i-p2wi.c @@ -22,7 +22,6 @@ * */ #include -#include #include #include #include -- cgit v1.2.3 From 66e5482752386786c4346f4f4b214b0998639702 Mon Sep 17 00:00:00 2001 From: John Sung Date: Fri, 27 Jun 2014 16:22:08 +0800 Subject: HID: usbhid: quirk for PM1610 and PM1640 Touchscreen. These device needs to be added to the quirks list with HID_QUIRK_NOGET, otherwise they will reset upon receiving the get input report requests. Signed-off-by: John Sung Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 2 ++ drivers/hid/usbhid/hid-quirks.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 6d00bb9366fa..1efeb12a38c7 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -715,6 +715,8 @@ #define USB_VENDOR_ID_PENMOUNT 0x14e1 #define USB_DEVICE_ID_PENMOUNT_PCI 0x3500 +#define USB_DEVICE_ID_PENMOUNT_1610 0x1610 +#define USB_DEVICE_ID_PENMOUNT_1640 0x1640 #define USB_VENDOR_ID_PETALYNX 0x18b1 #define USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE 0x0037 diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 59badc10a08c..fbaefc34ee95 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -76,6 +76,8 @@ static const struct hid_blacklist { { USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GX680R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_NEXIO, USB_DEVICE_ID_NEXIO_MULTITOUCH_PTI0750, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_NOVATEK, USB_DEVICE_ID_NOVATEK_MOUSE, HID_QUIRK_NO_INIT_REPORTS }, + { USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_1610, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_1640, HID_QUIRK_NOGET }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS }, -- cgit v1.2.3 From 3fc60aa097b8eb0f701c5bf755bc8f7d3ffeb0bd Mon Sep 17 00:00:00 2001 From: Denis Kirjanov Date: Wed, 25 Jun 2014 21:34:56 +0400 Subject: powerpc: bpf: Use correct mask while accessing the VLAN tag To get a full tag (and not just a VID) we should access the TCI except the VLAN_TAG_PRESENT field (which means that 802.1q header is present). Also ensure that the VLAN_TAG_PRESENT stay on its place Signed-off-by: Denis Kirjanov Signed-off-by: David S. Miller --- arch/powerpc/net/bpf_jit_comp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c index 6dcdadefd8d0..892167b0a4bc 100644 --- a/arch/powerpc/net/bpf_jit_comp.c +++ b/arch/powerpc/net/bpf_jit_comp.c @@ -390,10 +390,12 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, case BPF_ANC | SKF_AD_VLAN_TAG: case BPF_ANC | SKF_AD_VLAN_TAG_PRESENT: BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, vlan_tci) != 2); + BUILD_BUG_ON(VLAN_TAG_PRESENT != 0x1000); + PPC_LHZ_OFFS(r_A, r_skb, offsetof(struct sk_buff, vlan_tci)); if (code == (BPF_ANC | SKF_AD_VLAN_TAG)) - PPC_ANDI(r_A, r_A, VLAN_VID_MASK); + PPC_ANDI(r_A, r_A, ~VLAN_TAG_PRESENT); else PPC_ANDI(r_A, r_A, VLAN_TAG_PRESENT); break; -- cgit v1.2.3 From dba63115ce0c888fcb4cdec3f8a4ba97d144afaf Mon Sep 17 00:00:00 2001 From: Denis Kirjanov Date: Wed, 25 Jun 2014 21:34:57 +0400 Subject: powerpc: bpf: Fix the broken LD_VLAN_TAG_PRESENT test We have to return the boolean here if the tag presents or not, not just ANDing the TCI with the mask which results to: [ 709.412097] test_bpf: #18 LD_VLAN_TAG_PRESENT [ 709.412245] ret 4096 != 1 [ 709.412332] ret 4096 != 1 [ 709.412333] FAIL (2 times) Signed-off-by: Denis Kirjanov Signed-off-by: David S. Miller --- arch/powerpc/net/bpf_jit_comp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c index 892167b0a4bc..82e82cadcde5 100644 --- a/arch/powerpc/net/bpf_jit_comp.c +++ b/arch/powerpc/net/bpf_jit_comp.c @@ -394,10 +394,12 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, PPC_LHZ_OFFS(r_A, r_skb, offsetof(struct sk_buff, vlan_tci)); - if (code == (BPF_ANC | SKF_AD_VLAN_TAG)) + if (code == (BPF_ANC | SKF_AD_VLAN_TAG)) { PPC_ANDI(r_A, r_A, ~VLAN_TAG_PRESENT); - else + } else { PPC_ANDI(r_A, r_A, VLAN_TAG_PRESENT); + PPC_SRWI(r_A, r_A, 12); + } break; case BPF_ANC | SKF_AD_QUEUE: BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, -- cgit v1.2.3 From fe984c08e20f0fc2b4666bf8eeeb02605568387b Mon Sep 17 00:00:00 2001 From: Andy Zhou Date: Tue, 6 May 2014 17:23:48 -0700 Subject: openvswitch: Fix a double free bug for the sample action When sample action returns with an error, the skb has already been freed. This patch fix a bug to make sure we don't free it again. This bug introduced by commit ccb1352e76cff05 (net: Add Open vSwitch kernel components.) Signed-off-by: Andy Zhou Signed-off-by: Pravin B Shelar --- net/openvswitch/actions.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c index c36856a457ca..e70d8b18e962 100644 --- a/net/openvswitch/actions.c +++ b/net/openvswitch/actions.c @@ -551,6 +551,8 @@ static int do_execute_actions(struct datapath *dp, struct sk_buff *skb, case OVS_ACTION_ATTR_SAMPLE: err = sample(dp, skb, a); + if (unlikely(err)) /* skb already freed. */ + return err; break; } -- cgit v1.2.3 From e0bb8c44ed5cfcc56b571758ed966ee48779024c Mon Sep 17 00:00:00 2001 From: Wei Zhang Date: Sat, 28 Jun 2014 12:34:53 -0700 Subject: openvswitch: supply a dummy err_handler of gre_cisco_protocol to prevent kernel crash When use gre vport, openvswitch register a gre_cisco_protocol but does not supply a err_handler with it. The gre_cisco_err() in net/ipv4/gre_demux.c expect err_handler be provided with the gre_cisco_protocol implementation, and call ->err_handler() without existence check, cause the kernel crash. This patch provide a err_handler to fix this bug. This bug introduced by commit aa310701e787087d (openvswitch: Add gre tunnel support.) Signed-off-by: Wei Zhang Signed-off-by: Jesse Gross Signed-off-by: Pravin B Shelar --- net/openvswitch/vport-gre.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/net/openvswitch/vport-gre.c b/net/openvswitch/vport-gre.c index 35ec4fed09e2..f49148a07da2 100644 --- a/net/openvswitch/vport-gre.c +++ b/net/openvswitch/vport-gre.c @@ -110,6 +110,22 @@ static int gre_rcv(struct sk_buff *skb, return PACKET_RCVD; } +/* Called with rcu_read_lock and BH disabled. */ +static int gre_err(struct sk_buff *skb, u32 info, + const struct tnl_ptk_info *tpi) +{ + struct ovs_net *ovs_net; + struct vport *vport; + + ovs_net = net_generic(dev_net(skb->dev), ovs_net_id); + vport = rcu_dereference(ovs_net->vport_net.gre_vport); + + if (unlikely(!vport)) + return PACKET_REJECT; + else + return PACKET_RCVD; +} + static int gre_tnl_send(struct vport *vport, struct sk_buff *skb) { struct net *net = ovs_dp_get_net(vport->dp); @@ -186,6 +202,7 @@ error: static struct gre_cisco_protocol gre_protocol = { .handler = gre_rcv, + .err_handler = gre_err, .priority = 1, }; -- cgit v1.2.3 From ad55200734c65a3ec5d0c39d6ea904008baea536 Mon Sep 17 00:00:00 2001 From: Ben Pfaff Date: Tue, 6 May 2014 16:48:38 -0700 Subject: openvswitch: Fix tracking of flags seen in TCP flows. Flow statistics need to take into account the TCP flags from the packet currently being processed (in 'key'), not the TCP flags matched by the flow found in the kernel flow table (in 'flow'). This bug made the Open vSwitch userspace fin_timeout action have no effect in many cases. This bug is introduced by commit 88d73f6c411ac2f0578 (openvswitch: Use TCP flags in the flow key for stats.) Reported-by: Len Gao Signed-off-by: Ben Pfaff Acked-by: Jarno Rajahalme Acked-by: Jesse Gross Signed-off-by: Pravin B Shelar --- net/openvswitch/datapath.c | 4 ++-- net/openvswitch/flow.c | 4 ++-- net/openvswitch/flow.h | 5 +++-- 3 files changed, 7 insertions(+), 6 deletions(-) diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c index 0d407bca81e3..a863678c50ac 100644 --- a/net/openvswitch/datapath.c +++ b/net/openvswitch/datapath.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2007-2013 Nicira, Inc. + * Copyright (c) 2007-2014 Nicira, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of version 2 of the GNU General Public @@ -276,7 +276,7 @@ void ovs_dp_process_received_packet(struct vport *p, struct sk_buff *skb) OVS_CB(skb)->flow = flow; OVS_CB(skb)->pkt_key = &key; - ovs_flow_stats_update(OVS_CB(skb)->flow, skb); + ovs_flow_stats_update(OVS_CB(skb)->flow, key.tp.flags, skb); ovs_execute_actions(dp, skb); stats_counter = &stats->n_hit; diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c index 334751cb1528..d07ab538fc9d 100644 --- a/net/openvswitch/flow.c +++ b/net/openvswitch/flow.c @@ -61,10 +61,10 @@ u64 ovs_flow_used_time(unsigned long flow_jiffies) #define TCP_FLAGS_BE16(tp) (*(__be16 *)&tcp_flag_word(tp) & htons(0x0FFF)) -void ovs_flow_stats_update(struct sw_flow *flow, struct sk_buff *skb) +void ovs_flow_stats_update(struct sw_flow *flow, __be16 tcp_flags, + struct sk_buff *skb) { struct flow_stats *stats; - __be16 tcp_flags = flow->key.tp.flags; int node = numa_node_id(); stats = rcu_dereference(flow->stats[node]); diff --git a/net/openvswitch/flow.h b/net/openvswitch/flow.h index ac395d2cd821..5e5aaed3a85b 100644 --- a/net/openvswitch/flow.h +++ b/net/openvswitch/flow.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2007-2013 Nicira, Inc. + * Copyright (c) 2007-2014 Nicira, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of version 2 of the GNU General Public @@ -180,7 +180,8 @@ struct arp_eth_header { unsigned char ar_tip[4]; /* target IP address */ } __packed; -void ovs_flow_stats_update(struct sw_flow *, struct sk_buff *); +void ovs_flow_stats_update(struct sw_flow *, __be16 tcp_flags, + struct sk_buff *); void ovs_flow_stats_get(const struct sw_flow *, struct ovs_flow_stats *, unsigned long *used, __be16 *tcp_flags); void ovs_flow_stats_clear(struct sw_flow *); -- cgit v1.2.3 From e8db5d6736a712a3e2280c0e31f4b301d85172d8 Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Wed, 21 May 2014 16:33:27 +0800 Subject: thermal: hwmon: Make the check for critical temp valid consistent On 05/21/2014 04:22 PM, Aaron Lu wrote: > On 05/21/2014 01:57 PM, Kui Zhang wrote: >> Hello, >> >> I get following error when rmmod thermal. >> >> rmmod thermal >> Killed While dealing with this problem, I found another problem that also results in a kernel crash on thermal module removal: From: Aaron Lu Date: Wed, 21 May 2014 16:05:38 +0800 Subject: [PATCH] thermal: hwmon: Make the check for critical temp valid consistent We used the tz->ops->get_crit_temp && !tz->ops->get_crit_temp(tz, temp) to decide if we need to create the temp_crit attribute file but we just check if tz->ops->get_crit_temp exists to decide if we need to remove that attribute file. Some ACPI thermal zone doesn't have a valid critical trip point and that would result in removing a non-existent device file on thermal module unload. Cc: All applicable Signed-off-by: Aaron Lu Signed-off-by: Zhang Rui --- drivers/thermal/thermal_hwmon.c | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-) diff --git a/drivers/thermal/thermal_hwmon.c b/drivers/thermal/thermal_hwmon.c index fdb07199d9c2..1967bee4f076 100644 --- a/drivers/thermal/thermal_hwmon.c +++ b/drivers/thermal/thermal_hwmon.c @@ -140,6 +140,12 @@ thermal_hwmon_lookup_temp(const struct thermal_hwmon_device *hwmon, return NULL; } +static bool thermal_zone_crit_temp_valid(struct thermal_zone_device *tz) +{ + unsigned long temp; + return tz->ops->get_crit_temp && !tz->ops->get_crit_temp(tz, &temp); +} + int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) { struct thermal_hwmon_device *hwmon; @@ -189,21 +195,18 @@ int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) if (result) goto free_temp_mem; - if (tz->ops->get_crit_temp) { - unsigned long temperature; - if (!tz->ops->get_crit_temp(tz, &temperature)) { - snprintf(temp->temp_crit.name, - sizeof(temp->temp_crit.name), + if (thermal_zone_crit_temp_valid(tz)) { + snprintf(temp->temp_crit.name, + sizeof(temp->temp_crit.name), "temp%d_crit", hwmon->count); - temp->temp_crit.attr.attr.name = temp->temp_crit.name; - temp->temp_crit.attr.attr.mode = 0444; - temp->temp_crit.attr.show = temp_crit_show; - sysfs_attr_init(&temp->temp_crit.attr.attr); - result = device_create_file(hwmon->device, - &temp->temp_crit.attr); - if (result) - goto unregister_input; - } + temp->temp_crit.attr.attr.name = temp->temp_crit.name; + temp->temp_crit.attr.attr.mode = 0444; + temp->temp_crit.attr.show = temp_crit_show; + sysfs_attr_init(&temp->temp_crit.attr.attr); + result = device_create_file(hwmon->device, + &temp->temp_crit.attr); + if (result) + goto unregister_input; } mutex_lock(&thermal_hwmon_list_lock); @@ -250,7 +253,7 @@ void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) } device_remove_file(hwmon->device, &temp->temp_input.attr); - if (tz->ops->get_crit_temp) + if (thermal_zone_crit_temp_valid(tz)) device_remove_file(hwmon->device, &temp->temp_crit.attr); mutex_lock(&thermal_hwmon_list_lock); -- cgit v1.2.3 From ca9521b770c988bb6bb8eea1241f7a487dab6ff1 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 18 Jun 2014 16:32:08 -0700 Subject: thermal: Add braces around suspect code It looks like this code is missing braces, otherwise the if statement shouldn't have been indented. Fix it. Signed-off-by: Stephen Boyd Signed-off-by: Zhang Rui --- drivers/thermal/of-thermal.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index 04b1be7fa018..a95ee2889b19 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -712,11 +712,12 @@ thermal_of_build_thermal_zone(struct device_node *np) } i = 0; - for_each_child_of_node(child, gchild) + for_each_child_of_node(child, gchild) { ret = thermal_of_populate_bind_params(gchild, &tz->tbps[i++], tz->trips, tz->ntrips); if (ret) goto free_tbps; + } finish: of_node_put(child); -- cgit v1.2.3 From dd354b84d47ec8ca53686bdb3cc1aecdeb75bef5 Mon Sep 17 00:00:00 2001 From: Punit Agrawal Date: Tue, 3 Jun 2014 10:59:58 +0100 Subject: thermal: Bind cooling devices with the correct arguments When binding cooling devices to thermal zones created from the device tree the minimum and maximum cooling states are in the wrong order leading to failure to bind. Fix the order of cooling states in the call to thermal_zone_bind_cooling_device to fix this. Cc:Zhang Rui Signed-off-by: Punit Agrawal Reviewed-by: Stephen Boyd Signed-off-by: Zhang Rui --- drivers/thermal/of-thermal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index a95ee2889b19..4b2b999b7611 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -156,8 +156,8 @@ static int of_thermal_bind(struct thermal_zone_device *thermal, ret = thermal_zone_bind_cooling_device(thermal, tbp->trip_id, cdev, - tbp->min, - tbp->max); + tbp->max, + tbp->min); if (ret) return ret; } -- cgit v1.2.3 From 93a88ef305ae928d9b1548d6c96734ae87843d02 Mon Sep 17 00:00:00 2001 From: Naveen Krishna Chatradhi Date: Thu, 26 Jun 2014 18:20:14 +0530 Subject: hwmon: (ntc_thermistor) Correct information printed during probe Currently, dev_info() at the end of the probe says "type:%s ". But, prints pdev->name. This patch uses "pdev_id->name" which prints the thermistor type. Signed-off-by: Naveen Krishna Chatradhi Signed-off-by: Guenter Roeck --- drivers/hwmon/ntc_thermistor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c index bdfbe9114889..ae66f42c4d6d 100644 --- a/drivers/hwmon/ntc_thermistor.c +++ b/drivers/hwmon/ntc_thermistor.c @@ -512,7 +512,7 @@ static int ntc_thermistor_probe(struct platform_device *pdev) } dev_info(&pdev->dev, "Thermistor type: %s successfully probed.\n", - pdev->name); + pdev_id->name); return 0; err_after_sysfs: -- cgit v1.2.3 From ceec634076b91bea57107541a46e92d765c69488 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 30 Jun 2014 11:34:48 +0200 Subject: HID: sensor-hub: fix potential memory leak hsdev is not freed in sensor_hub_probe when kasprintf inside the for loop fails. This is because hsdev is not set to platform_data yet (to be freed by the code in the err_no_mem label). So free the memory explicitly in the 'if' branch, as this is the only place where this is (and will) be needed. Reported-by: coverity Signed-off-by: Jiri Slaby Cc: srinivas pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/hid-sensor-hub.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index 13ce4e3aebf4..e244e449cbba 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -636,6 +636,7 @@ static int sensor_hub_probe(struct hid_device *hdev, if (name == NULL) { hid_err(hdev, "Failed MFD device name\n"); ret = -ENOMEM; + kfree(hsdev); goto err_no_mem; } sd->hid_sensor_hub_client_devs[ -- cgit v1.2.3 From cec1cdea6f6d9fadf5f14fa80754d4a066ca76e0 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Mon, 23 Jun 2014 23:29:09 +0300 Subject: clk: samsung: fix several typos to fix boot on s3c2410 There's a several typos in a driver: 2410 instead of S3C2410 and wrong argument to ARRAY_SIZE(). They prevent s3c2410 from properly booting. Signed-off-by: Vasily Khoruzhick Reviewed-by: Heiko Stuebner Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-s3c2410.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/samsung/clk-s3c2410.c b/drivers/clk/samsung/clk-s3c2410.c index ba0716801db2..bd9a873da090 100644 --- a/drivers/clk/samsung/clk-s3c2410.c +++ b/drivers/clk/samsung/clk-s3c2410.c @@ -378,7 +378,7 @@ void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, if (!np) s3c2410_common_clk_register_fixed_ext(ctx, xti_f); - if (current_soc == 2410) { + if (current_soc == S3C2410) { if (_get_rate("xti") == 12 * MHZ) { s3c2410_plls[mpll].rate_table = pll_s3c2410_12mhz_tbl; s3c2410_plls[upll].rate_table = pll_s3c2410_12mhz_tbl; @@ -432,7 +432,7 @@ void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, samsung_clk_register_fixed_factor(ctx, s3c2410_ffactor, ARRAY_SIZE(s3c2410_ffactor)); samsung_clk_register_alias(ctx, s3c2410_aliases, - ARRAY_SIZE(s3c2410_common_aliases)); + ARRAY_SIZE(s3c2410_aliases)); break; case S3C2440: samsung_clk_register_mux(ctx, s3c2440_muxes, -- cgit v1.2.3 From 34ece9e610682f34776136cba7b4600ea5d8fd94 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Mon, 23 Jun 2014 23:29:10 +0300 Subject: clk: samsung: add more aliases for s3c24xx Without these aliases clock lookup fails in s3c2410fb, s3cmci, s3c2410-nand, s3c24xx-i2s, and i2c-s3c2410 drivers. Signed-off-by: Vasily Khoruzhick Reviewed-by: Heiko Stuebner Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-s3c2410.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/clk/samsung/clk-s3c2410.c b/drivers/clk/samsung/clk-s3c2410.c index bd9a873da090..140f4733c02e 100644 --- a/drivers/clk/samsung/clk-s3c2410.c +++ b/drivers/clk/samsung/clk-s3c2410.c @@ -152,6 +152,11 @@ struct samsung_clock_alias s3c2410_common_aliases[] __initdata = { ALIAS(HCLK, NULL, "hclk"), ALIAS(MPLL, NULL, "mpll"), ALIAS(FCLK, NULL, "fclk"), + ALIAS(PCLK, NULL, "watchdog"), + ALIAS(PCLK_SDI, NULL, "sdi"), + ALIAS(HCLK_NAND, NULL, "nand"), + ALIAS(PCLK_I2S, NULL, "iis"), + ALIAS(PCLK_I2C, NULL, "i2c"), }; /* S3C2410 specific clocks */ -- cgit v1.2.3 From a37c82a3b3c0910019abfd22a97be1fdf11ae3e5 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Tue, 24 Jun 2014 15:57:12 +0200 Subject: clk: samsung: exynos4: Remove SRC_MASK_ISP gates ISP special clocks have dedicated gating registers and so MUX SRC_MASK register should not be used. This patch fixes the problem of Exynos4x12-based boards freezing on system suspend, because those mux outputs need not to be masked while suspending. Signed-off-by: Tomasz Figa Cc: Mike Turquette --- drivers/clk/samsung/clk-exynos4.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index 4f150c9dd38c..7f4a473a7ad7 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -925,21 +925,13 @@ static struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = { GATE(CLK_RTC, "rtc", "aclk100", E4X12_GATE_IP_PERIR, 15, 0, 0), GATE(CLK_KEYIF, "keyif", "aclk100", E4X12_GATE_IP_PERIR, 16, 0, 0), - GATE(CLK_SCLK_PWM_ISP, "sclk_pwm_isp", "div_pwm_isp", - E4X12_SRC_MASK_ISP, 0, CLK_SET_RATE_PARENT, 0), - GATE(CLK_SCLK_SPI0_ISP, "sclk_spi0_isp", "div_spi0_isp_pre", - E4X12_SRC_MASK_ISP, 4, CLK_SET_RATE_PARENT, 0), - GATE(CLK_SCLK_SPI1_ISP, "sclk_spi1_isp", "div_spi1_isp_pre", - E4X12_SRC_MASK_ISP, 8, CLK_SET_RATE_PARENT, 0), - GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "div_uart_isp", - E4X12_SRC_MASK_ISP, 12, CLK_SET_RATE_PARENT, 0), - GATE(CLK_PWM_ISP_SCLK, "pwm_isp_sclk", "sclk_pwm_isp", + GATE(CLK_PWM_ISP_SCLK, "pwm_isp_sclk", "div_pwm_isp", E4X12_GATE_IP_ISP, 0, 0, 0), - GATE(CLK_SPI0_ISP_SCLK, "spi0_isp_sclk", "sclk_spi0_isp", + GATE(CLK_SPI0_ISP_SCLK, "spi0_isp_sclk", "div_spi0_isp_pre", E4X12_GATE_IP_ISP, 1, 0, 0), - GATE(CLK_SPI1_ISP_SCLK, "spi1_isp_sclk", "sclk_spi1_isp", + GATE(CLK_SPI1_ISP_SCLK, "spi1_isp_sclk", "div_spi1_isp_pre", E4X12_GATE_IP_ISP, 2, 0, 0), - GATE(CLK_UART_ISP_SCLK, "uart_isp_sclk", "sclk_uart_isp", + GATE(CLK_UART_ISP_SCLK, "uart_isp_sclk", "div_uart_isp", E4X12_GATE_IP_ISP, 3, 0, 0), GATE(CLK_WDT, "watchdog", "aclk100", E4X12_GATE_IP_PERIR, 14, 0, 0), GATE(CLK_PCM0, "pcm0", "aclk100", E4X12_GATE_IP_MAUDIO, 2, -- cgit v1.2.3 From a92dda4bfad338b48c6190b1da70fe7f0eefc55d Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 18 Jun 2014 10:52:23 +0100 Subject: clk: s3c64xx: Hookup SPI clocks correctly In the move to this clock driver the hookups for the SPI clocks were dropped, which causes my system Cragganmore (s3c6410 based) to be unable to locate any spibus clocks. This patch adds them back in. When taking the clock from the epll clock (SCLK) the rates on the SPI bus are incorrect, this needs further debugging but the hookup here should be correct and the problem should be else where. The USBCLK case has been dropped because this requires the USB PHY to be enabled. Signed-off-by: Charles Keepax Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-s3c64xx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/clk/samsung/clk-s3c64xx.c b/drivers/clk/samsung/clk-s3c64xx.c index efa16ee592c8..8889ff1c10fc 100644 --- a/drivers/clk/samsung/clk-s3c64xx.c +++ b/drivers/clk/samsung/clk-s3c64xx.c @@ -418,8 +418,10 @@ static struct samsung_clock_alias s3c64xx_clock_aliases[] = { ALIAS(SCLK_MMC2, "s3c-sdhci.2", "mmc_busclk.2"), ALIAS(SCLK_MMC1, "s3c-sdhci.1", "mmc_busclk.2"), ALIAS(SCLK_MMC0, "s3c-sdhci.0", "mmc_busclk.2"), - ALIAS(SCLK_SPI1, "s3c6410-spi.1", "spi-bus"), - ALIAS(SCLK_SPI0, "s3c6410-spi.0", "spi-bus"), + ALIAS(PCLK_SPI1, "s3c6410-spi.1", "spi_busclk0"), + ALIAS(SCLK_SPI1, "s3c6410-spi.1", "spi_busclk2"), + ALIAS(PCLK_SPI0, "s3c6410-spi.0", "spi_busclk0"), + ALIAS(SCLK_SPI0, "s3c6410-spi.0", "spi_busclk2"), ALIAS(SCLK_AUDIO1, "samsung-pcm.1", "audio-bus"), ALIAS(SCLK_AUDIO1, "samsung-i2s.1", "audio-bus"), ALIAS(SCLK_AUDIO0, "samsung-pcm.0", "audio-bus"), -- cgit v1.2.3 From 0b1643b39ddae68f1b1b5ed848c8268a004a60a9 Mon Sep 17 00:00:00 2001 From: Rahul Sharma Date: Thu, 19 Jun 2014 11:17:16 +0530 Subject: clk/exynos5250: fix bit number for tv sysmmu clock Change bit from 2 to 9 for tv (mixer) sysmmu clock. Signed-off-by: Rahul Sharma Reviewed-by: Sachin Kamat Acked-by: Kukjin Kim Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-exynos5250.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c index 1fad4c5e3f5d..184f64293b26 100644 --- a/drivers/clk/samsung/clk-exynos5250.c +++ b/drivers/clk/samsung/clk-exynos5250.c @@ -661,7 +661,7 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = { GATE(CLK_RTC, "rtc", "div_aclk66", GATE_IP_PERIS, 20, 0, 0), GATE(CLK_TMU, "tmu", "div_aclk66", GATE_IP_PERIS, 21, 0, 0), GATE(CLK_SMMU_TV, "smmu_tv", "mout_aclk200_disp1_sub", - GATE_IP_DISP1, 2, 0, 0), + GATE_IP_DISP1, 9, 0, 0), GATE(CLK_SMMU_FIMD1, "smmu_fimd1", "mout_aclk200_disp1_sub", GATE_IP_DISP1, 8, 0, 0), GATE(CLK_SMMU_2D, "smmu_2d", "div_aclk200", GATE_IP_ACP, 7, 0, 0), -- cgit v1.2.3 From 44ff0254b89079a8a95e652635e760d93196ac1f Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Thu, 5 Jun 2014 13:35:14 -0700 Subject: clk: exynos5420: Remove aclk66_peric from the clock tree description The "aclk66_peric" clock is a gate clock with a whole bunch of gates underneath it. This big gate isn't very useful to include in our clock tree. If any of the children need to be turned on then the big gate will need to be on anyway. ...and there are plenty of other "big gates" that aren't described in our clock tree, some of which shut off collections of clocks that have no relationship in the hierarchy so are hard to model. "aclk66_peric" is causing earlyprintk problems since it gets disabled as part of the boot process, so let's just remove it. Strangely (and for no good reason) this clock is exported as part of the common clock bindings. Remove it since there are no in-kernel device trees using it and no reason anyone out of tree should refer to it either. Signed-off-by: Doug Anderson Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-exynos5420.c | 85 ++++++++++++++++++++++------------ include/dt-bindings/clock/exynos5420.h | 1 - 2 files changed, 55 insertions(+), 31 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c index 9d7d7eed03fd..61eccf0dd72f 100644 --- a/drivers/clk/samsung/clk-exynos5420.c +++ b/drivers/clk/samsung/clk-exynos5420.c @@ -890,8 +890,6 @@ static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = { GATE_BUS_TOP, 9, CLK_IGNORE_UNUSED, 0), GATE(0, "aclk66_psgen", "mout_user_aclk66_psgen", GATE_BUS_TOP, 10, CLK_IGNORE_UNUSED, 0), - GATE(CLK_ACLK66_PERIC, "aclk66_peric", "mout_user_aclk66_peric", - GATE_BUS_TOP, 11, CLK_IGNORE_UNUSED, 0), GATE(0, "aclk266_isp", "mout_user_aclk266_isp", GATE_BUS_TOP, 13, 0, 0), GATE(0, "aclk166", "mout_user_aclk166", @@ -994,34 +992,61 @@ static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = { SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0), /* PERIC Block */ - GATE(CLK_UART0, "uart0", "aclk66_peric", GATE_IP_PERIC, 0, 0, 0), - GATE(CLK_UART1, "uart1", "aclk66_peric", GATE_IP_PERIC, 1, 0, 0), - GATE(CLK_UART2, "uart2", "aclk66_peric", GATE_IP_PERIC, 2, 0, 0), - GATE(CLK_UART3, "uart3", "aclk66_peric", GATE_IP_PERIC, 3, 0, 0), - GATE(CLK_I2C0, "i2c0", "aclk66_peric", GATE_IP_PERIC, 6, 0, 0), - GATE(CLK_I2C1, "i2c1", "aclk66_peric", GATE_IP_PERIC, 7, 0, 0), - GATE(CLK_I2C2, "i2c2", "aclk66_peric", GATE_IP_PERIC, 8, 0, 0), - GATE(CLK_I2C3, "i2c3", "aclk66_peric", GATE_IP_PERIC, 9, 0, 0), - GATE(CLK_USI0, "usi0", "aclk66_peric", GATE_IP_PERIC, 10, 0, 0), - GATE(CLK_USI1, "usi1", "aclk66_peric", GATE_IP_PERIC, 11, 0, 0), - GATE(CLK_USI2, "usi2", "aclk66_peric", GATE_IP_PERIC, 12, 0, 0), - GATE(CLK_USI3, "usi3", "aclk66_peric", GATE_IP_PERIC, 13, 0, 0), - GATE(CLK_I2C_HDMI, "i2c_hdmi", "aclk66_peric", GATE_IP_PERIC, 14, 0, 0), - GATE(CLK_TSADC, "tsadc", "aclk66_peric", GATE_IP_PERIC, 15, 0, 0), - GATE(CLK_SPI0, "spi0", "aclk66_peric", GATE_IP_PERIC, 16, 0, 0), - GATE(CLK_SPI1, "spi1", "aclk66_peric", GATE_IP_PERIC, 17, 0, 0), - GATE(CLK_SPI2, "spi2", "aclk66_peric", GATE_IP_PERIC, 18, 0, 0), - GATE(CLK_I2S1, "i2s1", "aclk66_peric", GATE_IP_PERIC, 20, 0, 0), - GATE(CLK_I2S2, "i2s2", "aclk66_peric", GATE_IP_PERIC, 21, 0, 0), - GATE(CLK_PCM1, "pcm1", "aclk66_peric", GATE_IP_PERIC, 22, 0, 0), - GATE(CLK_PCM2, "pcm2", "aclk66_peric", GATE_IP_PERIC, 23, 0, 0), - GATE(CLK_PWM, "pwm", "aclk66_peric", GATE_IP_PERIC, 24, 0, 0), - GATE(CLK_SPDIF, "spdif", "aclk66_peric", GATE_IP_PERIC, 26, 0, 0), - GATE(CLK_USI4, "usi4", "aclk66_peric", GATE_IP_PERIC, 28, 0, 0), - GATE(CLK_USI5, "usi5", "aclk66_peric", GATE_IP_PERIC, 30, 0, 0), - GATE(CLK_USI6, "usi6", "aclk66_peric", GATE_IP_PERIC, 31, 0, 0), - - GATE(CLK_KEYIF, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0), + GATE(CLK_UART0, "uart0", "mout_user_aclk66_peric", + GATE_IP_PERIC, 0, 0, 0), + GATE(CLK_UART1, "uart1", "mout_user_aclk66_peric", + GATE_IP_PERIC, 1, 0, 0), + GATE(CLK_UART2, "uart2", "mout_user_aclk66_peric", + GATE_IP_PERIC, 2, 0, 0), + GATE(CLK_UART3, "uart3", "mout_user_aclk66_peric", + GATE_IP_PERIC, 3, 0, 0), + GATE(CLK_I2C0, "i2c0", "mout_user_aclk66_peric", + GATE_IP_PERIC, 6, 0, 0), + GATE(CLK_I2C1, "i2c1", "mout_user_aclk66_peric", + GATE_IP_PERIC, 7, 0, 0), + GATE(CLK_I2C2, "i2c2", "mout_user_aclk66_peric", + GATE_IP_PERIC, 8, 0, 0), + GATE(CLK_I2C3, "i2c3", "mout_user_aclk66_peric", + GATE_IP_PERIC, 9, 0, 0), + GATE(CLK_USI0, "usi0", "mout_user_aclk66_peric", + GATE_IP_PERIC, 10, 0, 0), + GATE(CLK_USI1, "usi1", "mout_user_aclk66_peric", + GATE_IP_PERIC, 11, 0, 0), + GATE(CLK_USI2, "usi2", "mout_user_aclk66_peric", + GATE_IP_PERIC, 12, 0, 0), + GATE(CLK_USI3, "usi3", "mout_user_aclk66_peric", + GATE_IP_PERIC, 13, 0, 0), + GATE(CLK_I2C_HDMI, "i2c_hdmi", "mout_user_aclk66_peric", + GATE_IP_PERIC, 14, 0, 0), + GATE(CLK_TSADC, "tsadc", "mout_user_aclk66_peric", + GATE_IP_PERIC, 15, 0, 0), + GATE(CLK_SPI0, "spi0", "mout_user_aclk66_peric", + GATE_IP_PERIC, 16, 0, 0), + GATE(CLK_SPI1, "spi1", "mout_user_aclk66_peric", + GATE_IP_PERIC, 17, 0, 0), + GATE(CLK_SPI2, "spi2", "mout_user_aclk66_peric", + GATE_IP_PERIC, 18, 0, 0), + GATE(CLK_I2S1, "i2s1", "mout_user_aclk66_peric", + GATE_IP_PERIC, 20, 0, 0), + GATE(CLK_I2S2, "i2s2", "mout_user_aclk66_peric", + GATE_IP_PERIC, 21, 0, 0), + GATE(CLK_PCM1, "pcm1", "mout_user_aclk66_peric", + GATE_IP_PERIC, 22, 0, 0), + GATE(CLK_PCM2, "pcm2", "mout_user_aclk66_peric", + GATE_IP_PERIC, 23, 0, 0), + GATE(CLK_PWM, "pwm", "mout_user_aclk66_peric", + GATE_IP_PERIC, 24, 0, 0), + GATE(CLK_SPDIF, "spdif", "mout_user_aclk66_peric", + GATE_IP_PERIC, 26, 0, 0), + GATE(CLK_USI4, "usi4", "mout_user_aclk66_peric", + GATE_IP_PERIC, 28, 0, 0), + GATE(CLK_USI5, "usi5", "mout_user_aclk66_peric", + GATE_IP_PERIC, 30, 0, 0), + GATE(CLK_USI6, "usi6", "mout_user_aclk66_peric", + GATE_IP_PERIC, 31, 0, 0), + + GATE(CLK_KEYIF, "keyif", "mout_user_aclk66_peric", + GATE_BUS_PERIC, 22, 0, 0), /* PERIS Block */ GATE(CLK_CHIPID, "chipid", "aclk66_psgen", diff --git a/include/dt-bindings/clock/exynos5420.h b/include/dt-bindings/clock/exynos5420.h index 97dcb89d37d3..14e1c8f9640c 100644 --- a/include/dt-bindings/clock/exynos5420.h +++ b/include/dt-bindings/clock/exynos5420.h @@ -63,7 +63,6 @@ #define CLK_SCLK_MPHY_IXTAL24 161 /* gate clocks */ -#define CLK_ACLK66_PERIC 256 #define CLK_UART0 257 #define CLK_UART1 258 #define CLK_UART2 259 -- cgit v1.2.3 From 970317aa48c6ef66cd023c039c2650c897bad927 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 30 Jun 2014 11:49:58 +0800 Subject: cgroup: fix mount failure in a corner case # cat test.sh #! /bin/bash mount -t cgroup -o cpu xxx /cgroup umount /cgroup mount -t cgroup -o cpu,cpuacct xxx /cgroup umount /cgroup # ./test.sh mount: xxx already mounted or /cgroup busy mount: according to mtab, xxx is already mounted on /cgroup It's because the cgroupfs_root of the first mount was under destruction asynchronously. Fix this by delaying and then retrying mount for this case. v3: - put the refcnt immediately after getting it. (Tejun) v2: - use percpu_ref_tryget_live() rather that introducing percpu_ref_alive(). (Tejun) - adjust comment. tj: Updated the comment a bit. Cc: # 3.15 Signed-off-by: Li Zefan Signed-off-by: Tejun Heo --- kernel/cgroup.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index d9a8be911f5b..64068667be84 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1648,10 +1648,12 @@ static struct dentry *cgroup_mount(struct file_system_type *fs_type, int flags, const char *unused_dev_name, void *data) { + struct cgroup_subsys *ss; struct cgroup_root *root; struct cgroup_sb_opts opts; struct dentry *dentry; int ret; + int i; bool new_sb; /* @@ -1677,6 +1679,27 @@ static struct dentry *cgroup_mount(struct file_system_type *fs_type, goto out_unlock; } + /* + * Destruction of cgroup root is asynchronous, so subsystems may + * still be dying after the previous unmount. Let's drain the + * dying subsystems. We just need to ensure that the ones + * unmounted previously finish dying and don't care about new ones + * starting. Testing ref liveliness is good enough. + */ + for_each_subsys(ss, i) { + if (!(opts.subsys_mask & (1 << i)) || + ss->root == &cgrp_dfl_root) + continue; + + if (!percpu_ref_tryget_live(&ss->root->cgrp.self.refcnt)) { + mutex_unlock(&cgroup_mutex); + msleep(10); + ret = restart_syscall(); + goto out_free; + } + cgroup_put(&ss->root->cgrp); + } + for_each_root(root) { bool name_match = false; -- cgit v1.2.3 From 4e26445faad366d67d7723622bf6a60a6f0f5993 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 30 Jun 2014 11:50:28 +0800 Subject: kernfs: introduce kernfs_pin_sb() kernfs_pin_sb() tries to get a refcnt of the superblock. This will be used by cgroupfs. v2: - make kernfs_pin_sb() return the superblock. - drop kernfs_drop_sb(). tj: Updated the comment a bit. [ This is a prerequisite for a bugfix. ] Cc: # 3.15 Acked-by: Greg Kroah-Hartman Signed-off-by: Li Zefan Signed-off-by: Tejun Heo --- fs/kernfs/mount.c | 30 ++++++++++++++++++++++++++++++ include/linux/kernfs.h | 1 + 2 files changed, 31 insertions(+) diff --git a/fs/kernfs/mount.c b/fs/kernfs/mount.c index d171b98a6cdd..f973ae9b05f1 100644 --- a/fs/kernfs/mount.c +++ b/fs/kernfs/mount.c @@ -211,6 +211,36 @@ void kernfs_kill_sb(struct super_block *sb) kernfs_put(root_kn); } +/** + * kernfs_pin_sb: try to pin the superblock associated with a kernfs_root + * @kernfs_root: the kernfs_root in question + * @ns: the namespace tag + * + * Pin the superblock so the superblock won't be destroyed in subsequent + * operations. This can be used to block ->kill_sb() which may be useful + * for kernfs users which dynamically manage superblocks. + * + * Returns NULL if there's no superblock associated to this kernfs_root, or + * -EINVAL if the superblock is being freed. + */ +struct super_block *kernfs_pin_sb(struct kernfs_root *root, const void *ns) +{ + struct kernfs_super_info *info; + struct super_block *sb = NULL; + + mutex_lock(&kernfs_mutex); + list_for_each_entry(info, &root->supers, node) { + if (info->ns == ns) { + sb = info->sb; + if (!atomic_inc_not_zero(&info->sb->s_active)) + sb = ERR_PTR(-EINVAL); + break; + } + } + mutex_unlock(&kernfs_mutex); + return sb; +} + void __init kernfs_init(void) { kernfs_node_cache = kmem_cache_create("kernfs_node_cache", diff --git a/include/linux/kernfs.h b/include/linux/kernfs.h index 17aa1cce6f8e..20f493564917 100644 --- a/include/linux/kernfs.h +++ b/include/linux/kernfs.h @@ -304,6 +304,7 @@ struct dentry *kernfs_mount_ns(struct file_system_type *fs_type, int flags, struct kernfs_root *root, unsigned long magic, bool *new_sb_created, const void *ns); void kernfs_kill_sb(struct super_block *sb); +struct super_block *kernfs_pin_sb(struct kernfs_root *root, const void *ns); void kernfs_init(void); -- cgit v1.2.3 From 3a32bd72d77058d768dbb38183ad517f720dd1bc Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 30 Jun 2014 11:50:59 +0800 Subject: cgroup: fix a race between cgroup_mount() and cgroup_kill_sb() We've converted cgroup to kernfs so cgroup won't be intertwined with vfs objects and locking, but there are dark areas. Run two instances of this script concurrently: for ((; ;)) { mount -t cgroup -o cpuacct xxx /cgroup umount /cgroup } After a while, I saw two mount processes were stuck at retrying, because they were waiting for a subsystem to become free, but the root associated with this subsystem never got freed. This can happen, if thread A is in the process of killing superblock but hasn't called percpu_ref_kill(), and at this time thread B is mounting the same cgroup root and finds the root in the root list and performs percpu_ref_try_get(). To fix this, we try to increase both the refcnt of the superblock and the percpu refcnt of cgroup root. v2: - we should try to get both the superblock refcnt and cgroup_root refcnt, because cgroup_root may have no superblock assosiated with it. - adjust/add comments. tj: Updated comments. Renamed @sb to @pinned_sb. Cc: # 3.15 Signed-off-by: Li Zefan Signed-off-by: Tejun Heo --- kernel/cgroup.c | 33 ++++++++++++++++++++++++++------- 1 file changed, 26 insertions(+), 7 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 64068667be84..70776aec2562 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1648,6 +1648,7 @@ static struct dentry *cgroup_mount(struct file_system_type *fs_type, int flags, const char *unused_dev_name, void *data) { + struct super_block *pinned_sb = NULL; struct cgroup_subsys *ss; struct cgroup_root *root; struct cgroup_sb_opts opts; @@ -1740,15 +1741,23 @@ static struct dentry *cgroup_mount(struct file_system_type *fs_type, } /* - * A root's lifetime is governed by its root cgroup. - * tryget_live failure indicate that the root is being - * destroyed. Wait for destruction to complete so that the - * subsystems are free. We can use wait_queue for the wait - * but this path is super cold. Let's just sleep for a bit - * and retry. + * We want to reuse @root whose lifetime is governed by its + * ->cgrp. Let's check whether @root is alive and keep it + * that way. As cgroup_kill_sb() can happen anytime, we + * want to block it by pinning the sb so that @root doesn't + * get killed before mount is complete. + * + * With the sb pinned, tryget_live can reliably indicate + * whether @root can be reused. If it's being killed, + * drain it. We can use wait_queue for the wait but this + * path is super cold. Let's just sleep a bit and retry. */ - if (!percpu_ref_tryget_live(&root->cgrp.self.refcnt)) { + pinned_sb = kernfs_pin_sb(root->kf_root, NULL); + if (IS_ERR(pinned_sb) || + !percpu_ref_tryget_live(&root->cgrp.self.refcnt)) { mutex_unlock(&cgroup_mutex); + if (!IS_ERR_OR_NULL(pinned_sb)) + deactivate_super(pinned_sb); msleep(10); ret = restart_syscall(); goto out_free; @@ -1793,6 +1802,16 @@ out_free: CGROUP_SUPER_MAGIC, &new_sb); if (IS_ERR(dentry) || !new_sb) cgroup_put(&root->cgrp); + + /* + * If @pinned_sb, we're reusing an existing root and holding an + * extra ref on its sb. Mount is complete. Put the extra ref. + */ + if (pinned_sb) { + WARN_ON(new_sb); + deactivate_super(pinned_sb); + } + return dentry; } -- cgit v1.2.3 From d0f9d64a0b8fb3399ca8dd0d54f4d305492c9217 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Fri, 20 Jun 2014 15:03:06 +0800 Subject: Thermal: imx: correct critical trip temperature setting On latest i.MX6 SOC with thermal calibration data of 0x5A100000, the critical trip temperature will be an invalid value and cause system auto shutdown as below log: thermal thermal_zone0: critical temperature reached(42 C),shutting down So, with universal formula for thermal sensor, only room temperature point is calibrated, which means the calibration data read from fuse only has valid data of bit [31:20], others are all 0, the critical trip point temperature can NOT depend on the hot point calibration data, here we set it to 20 C higher than default passive temperature. Signed-off-by: Anson Huang Acked-by: Shawn Guo Signed-off-by: Zhang Rui --- drivers/thermal/imx_thermal.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index a99c63152b8d..2c516f2eebed 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -306,7 +306,7 @@ static int imx_get_sensor_data(struct platform_device *pdev) { struct imx_thermal_data *data = platform_get_drvdata(pdev); struct regmap *map; - int t1, t2, n1, n2; + int t1, n1; int ret; u32 val; u64 temp64; @@ -333,14 +333,10 @@ static int imx_get_sensor_data(struct platform_device *pdev) /* * Sensor data layout: * [31:20] - sensor value @ 25C - * [19:8] - sensor value of hot - * [7:0] - hot temperature value * Use universal formula now and only need sensor value @ 25C * slope = 0.4297157 - (0.0015976 * 25C fuse) */ n1 = val >> 20; - n2 = (val & 0xfff00) >> 8; - t2 = val & 0xff; t1 = 25; /* t1 always 25C */ /* @@ -366,16 +362,16 @@ static int imx_get_sensor_data(struct platform_device *pdev) data->c2 = n1 * data->c1 + 1000 * t1; /* - * Set the default passive cooling trip point to 20 °C below the - * maximum die temperature. Can be changed from userspace. + * Set the default passive cooling trip point, + * can be changed from userspace. */ - data->temp_passive = 1000 * (t2 - 20); + data->temp_passive = IMX_TEMP_PASSIVE; /* - * The maximum die temperature is t2, let's give 5 °C cushion - * for noise and possible temperature rise between measurements. + * The maximum die temperature set to 20 C higher than + * IMX_TEMP_PASSIVE. */ - data->temp_critical = 1000 * (t2 - 5); + data->temp_critical = 1000 * 20 + data->temp_passive; return 0; } -- cgit v1.2.3 From fbe2ddcdcca9c15558533cb75e5161152338b548 Mon Sep 17 00:00:00 2001 From: Rickard Strandqvist Date: Mon, 2 Jun 2014 23:25:30 +0200 Subject: thermal: ti-soc-thermal: ti-bandgap.c: Cleaning up wrong address is checked Wrong address is checked after memory allocation. Signed-off-by: Rickard Strandqvist Signed-off-by: Zhang Rui --- drivers/thermal/ti-soc-thermal/ti-bandgap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index a1271b55103a..634b6ce0e63a 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c @@ -1155,7 +1155,7 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev) /* register shadow for context save and restore */ bgp->regval = devm_kzalloc(&pdev->dev, sizeof(*bgp->regval) * bgp->conf->sensor_count, GFP_KERNEL); - if (!bgp) { + if (!bgp->regval) { dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n"); return ERR_PTR(-ENOMEM); } -- cgit v1.2.3 From 6b533269fb2513a1281a878e316bb920fc54db31 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Mon, 2 Jun 2014 18:08:17 +0100 Subject: tools/thermal: tmon: fix compilation errors when building statically tmon fails to build statically with the following error: $ make LDFLAGS=-static gcc -O1 -Wall -Wshadow -W -Wformat -Wimplicit-function-declaration -Wimplicit-int -fstack-protector -D VERSION=\"1.0\" -static tmon.o tui.o sysfs.o pid.o -o tmon -lm -lpanel -lncursesw -lpthread tmon.o: In function `tmon_sig_handler': tmon.c:(.text+0x21): undefined reference to `stdscr' tmon.o: In function `tmon_cleanup': tmon.c:(.text+0xb9): undefined reference to `stdscr' tmon.c:(.text+0x11e): undefined reference to `stdscr' tmon.c:(.text+0x123): undefined reference to `keypad' tmon.c:(.text+0x12d): undefined reference to `nocbreak' tmon.o: In function `main': tmon.c:(.text+0x785): undefined reference to `stdscr' tmon.c:(.text+0x78a): undefined reference to `nodelay' tui.o: In function `setup_windows': tui.c:(.text+0x131): undefined reference to `stdscr' tui.c:(.text+0x176): undefined reference to `stdscr' tui.c:(.text+0x19f): undefined reference to `stdscr' tui.c:(.text+0x1cc): undefined reference to `stdscr' tui.c:(.text+0x1ff): undefined reference to `stdscr' tui.o:tui.c:(.text+0x229): more undefined references to `stdscr' follow tui.o: In function `show_cooling_device': [...] stdscr() and friends are in libtinfo (part of ncurses) so add it to the libraries that are linked in when compiling tmon to fix it. Cc: Jacob Pan Cc: Zhang Rui Signed-off-by: Javi Merino Acked-by: Jacob Pan --- tools/thermal/tmon/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/thermal/tmon/Makefile b/tools/thermal/tmon/Makefile index 447321104ec0..e775adcbd29f 100644 --- a/tools/thermal/tmon/Makefile +++ b/tools/thermal/tmon/Makefile @@ -21,7 +21,7 @@ OBJS = tmon.o tui.o sysfs.o pid.o OBJS += tmon: $(OBJS) Makefile tmon.h - $(CC) ${CFLAGS} $(LDFLAGS) $(OBJS) -o $(TARGET) -lm -lpanel -lncursesw -lpthread + $(CC) ${CFLAGS} $(LDFLAGS) $(OBJS) -o $(TARGET) -lm -lpanel -lncursesw -ltinfo -lpthread valgrind: tmon sudo valgrind -v --track-origins=yes --tool=memcheck --leak-check=yes --show-reachable=yes --num-callers=20 --track-fds=yes ./$(TARGET) 1> /dev/null -- cgit v1.2.3 From 4a46b24e147dfa9b858026da02cad0bdd4e149d2 Mon Sep 17 00:00:00 2001 From: Alex Wang Date: Mon, 30 Jun 2014 20:30:29 -0700 Subject: openvswitch: Use exact lookup for flow_get and flow_del. Due to the race condition in userspace, there is chance that two overlapping megaflows could be installed in datapath. And this causes userspace unable to delete the less inclusive megaflow flow even after it timeout, since the flow_del logic will stop at the first match of masked flow. This commit fixes the bug by making the kernel flow_del and flow_get logic check all masks in that case. Introduced by 03f0d916a (openvswitch: Mega flow implementation). Signed-off-by: Alex Wang Acked-by: Andy Zhou Signed-off-by: Pravin B Shelar --- net/openvswitch/datapath.c | 23 +++++++++++------------ net/openvswitch/flow_table.c | 16 ++++++++++++++++ net/openvswitch/flow_table.h | 3 ++- 3 files changed, 29 insertions(+), 13 deletions(-) diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c index a863678c50ac..9db4bf6740d1 100644 --- a/net/openvswitch/datapath.c +++ b/net/openvswitch/datapath.c @@ -889,8 +889,11 @@ static int ovs_flow_cmd_new(struct sk_buff *skb, struct genl_info *info) } /* The unmasked key has to be the same for flow updates. */ if (unlikely(!ovs_flow_cmp_unmasked_key(flow, &match))) { - error = -EEXIST; - goto err_unlock_ovs; + flow = ovs_flow_tbl_lookup_exact(&dp->table, &match); + if (!flow) { + error = -ENOENT; + goto err_unlock_ovs; + } } /* Update actions. */ old_acts = ovsl_dereference(flow->sf_acts); @@ -981,16 +984,12 @@ static int ovs_flow_cmd_set(struct sk_buff *skb, struct genl_info *info) goto err_unlock_ovs; } /* Check that the flow exists. */ - flow = ovs_flow_tbl_lookup(&dp->table, &key); + flow = ovs_flow_tbl_lookup_exact(&dp->table, &match); if (unlikely(!flow)) { error = -ENOENT; goto err_unlock_ovs; } - /* The unmasked key has to be the same for flow updates. */ - if (unlikely(!ovs_flow_cmp_unmasked_key(flow, &match))) { - error = -EEXIST; - goto err_unlock_ovs; - } + /* Update actions, if present. */ if (likely(acts)) { old_acts = ovsl_dereference(flow->sf_acts); @@ -1063,8 +1062,8 @@ static int ovs_flow_cmd_get(struct sk_buff *skb, struct genl_info *info) goto unlock; } - flow = ovs_flow_tbl_lookup(&dp->table, &key); - if (!flow || !ovs_flow_cmp_unmasked_key(flow, &match)) { + flow = ovs_flow_tbl_lookup_exact(&dp->table, &match); + if (!flow) { err = -ENOENT; goto unlock; } @@ -1113,8 +1112,8 @@ static int ovs_flow_cmd_del(struct sk_buff *skb, struct genl_info *info) goto unlock; } - flow = ovs_flow_tbl_lookup(&dp->table, &key); - if (unlikely(!flow || !ovs_flow_cmp_unmasked_key(flow, &match))) { + flow = ovs_flow_tbl_lookup_exact(&dp->table, &match); + if (unlikely(!flow)) { err = -ENOENT; goto unlock; } diff --git a/net/openvswitch/flow_table.c b/net/openvswitch/flow_table.c index 574c3abc9b30..cf2d853646f0 100644 --- a/net/openvswitch/flow_table.c +++ b/net/openvswitch/flow_table.c @@ -456,6 +456,22 @@ struct sw_flow *ovs_flow_tbl_lookup(struct flow_table *tbl, return ovs_flow_tbl_lookup_stats(tbl, key, &n_mask_hit); } +struct sw_flow *ovs_flow_tbl_lookup_exact(struct flow_table *tbl, + struct sw_flow_match *match) +{ + struct table_instance *ti = rcu_dereference_ovsl(tbl->ti); + struct sw_flow_mask *mask; + struct sw_flow *flow; + + /* Always called under ovs-mutex. */ + list_for_each_entry(mask, &tbl->mask_list, list) { + flow = masked_flow_lookup(ti, match->key, mask); + if (flow && ovs_flow_cmp_unmasked_key(flow, match)) /* Found */ + return flow; + } + return NULL; +} + int ovs_flow_tbl_num_masks(const struct flow_table *table) { struct sw_flow_mask *mask; diff --git a/net/openvswitch/flow_table.h b/net/openvswitch/flow_table.h index ca8a5820f615..5918bff7f3f6 100644 --- a/net/openvswitch/flow_table.h +++ b/net/openvswitch/flow_table.h @@ -76,7 +76,8 @@ struct sw_flow *ovs_flow_tbl_lookup_stats(struct flow_table *, u32 *n_mask_hit); struct sw_flow *ovs_flow_tbl_lookup(struct flow_table *, const struct sw_flow_key *); - +struct sw_flow *ovs_flow_tbl_lookup_exact(struct flow_table *tbl, + struct sw_flow_match *match); bool ovs_flow_cmp_unmasked_key(const struct sw_flow *flow, struct sw_flow_match *match); -- cgit v1.2.3 From e9110361a9a4e258b072b14bd44eb78cf11453cb Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Tue, 24 Jun 2014 09:25:18 +0200 Subject: UBI: fix the volumes tree sorting criteria Commig "604b592 UBI: fix rb_tree node comparison in add_map" broke fastmap backward compatibility and older fastmap images cannot be mounted anymore. The reason is that it changes the volumes RB-tree sorting criteria. This patch fixes the problem. Artem: re-write the commit message Signed-off-by: Heiko Schocher Acked-by: Richard Weinberger Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/fastmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/ubi/fastmap.c b/drivers/mtd/ubi/fastmap.c index b04e7d059888..72f39daee649 100644 --- a/drivers/mtd/ubi/fastmap.c +++ b/drivers/mtd/ubi/fastmap.c @@ -125,7 +125,7 @@ static struct ubi_ainf_volume *add_vol(struct ubi_attach_info *ai, int vol_id, parent = *p; av = rb_entry(parent, struct ubi_ainf_volume, rb); - if (vol_id < av->vol_id) + if (vol_id > av->vol_id) p = &(*p)->rb_left; else p = &(*p)->rb_right; -- cgit v1.2.3 From 7f502361531e9eecb396cf99bdc9e9a59f7ebd7f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 30 Jun 2014 01:26:23 -0700 Subject: ipv4: irq safe sk_dst_[re]set() and ipv4_sk_update_pmtu() fix We have two different ways to handle changes to sk->sk_dst First way (used by TCP) assumes socket lock is owned by caller, and use no extra lock : __sk_dst_set() & __sk_dst_reset() Another way (used by UDP) uses sk_dst_lock because socket lock is not always taken. Note that sk_dst_lock is not softirq safe. These ways are not inter changeable for a given socket type. ipv4_sk_update_pmtu(), added in linux-3.8, added a race, as it used the socket lock as synchronization, but users might be UDP sockets. Instead of converting sk_dst_lock to a softirq safe version, use xchg() as we did for sk_rx_dst in commit e47eb5dfb296b ("udp: ipv4: do not use sk_dst_lock from softirq context") In a follow up patch, we probably can remove sk_dst_lock, as it is only used in IPv6. Signed-off-by: Eric Dumazet Cc: Steffen Klassert Fixes: 9cb3a50c5f63e ("ipv4: Invalidate the socket cached route on pmtu events if possible") Signed-off-by: David S. Miller --- include/net/sock.h | 12 ++++++------ net/ipv4/route.c | 15 ++++++++------- 2 files changed, 14 insertions(+), 13 deletions(-) diff --git a/include/net/sock.h b/include/net/sock.h index 173cae485de1..c556fd9b05ac 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1768,9 +1768,11 @@ __sk_dst_set(struct sock *sk, struct dst_entry *dst) static inline void sk_dst_set(struct sock *sk, struct dst_entry *dst) { - spin_lock(&sk->sk_dst_lock); - __sk_dst_set(sk, dst); - spin_unlock(&sk->sk_dst_lock); + struct dst_entry *old_dst; + + sk_tx_queue_clear(sk); + old_dst = xchg(&sk->sk_dst_cache, dst); + dst_release(old_dst); } static inline void @@ -1782,9 +1784,7 @@ __sk_dst_reset(struct sock *sk) static inline void sk_dst_reset(struct sock *sk) { - spin_lock(&sk->sk_dst_lock); - __sk_dst_reset(sk); - spin_unlock(&sk->sk_dst_lock); + sk_dst_set(sk, NULL); } struct dst_entry *__sk_dst_check(struct sock *sk, u32 cookie); diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 082239ffe34a..3162ea923ded 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1010,7 +1010,7 @@ void ipv4_sk_update_pmtu(struct sk_buff *skb, struct sock *sk, u32 mtu) const struct iphdr *iph = (const struct iphdr *) skb->data; struct flowi4 fl4; struct rtable *rt; - struct dst_entry *dst; + struct dst_entry *odst = NULL; bool new = false; bh_lock_sock(sk); @@ -1018,16 +1018,17 @@ void ipv4_sk_update_pmtu(struct sk_buff *skb, struct sock *sk, u32 mtu) if (!ip_sk_accept_pmtu(sk)) goto out; - rt = (struct rtable *) __sk_dst_get(sk); + odst = sk_dst_get(sk); - if (sock_owned_by_user(sk) || !rt) { + if (sock_owned_by_user(sk) || !odst) { __ipv4_sk_update_pmtu(skb, sk, mtu); goto out; } __build_flow_key(&fl4, sk, iph, 0, 0, 0, 0, 0); - if (!__sk_dst_check(sk, 0)) { + rt = (struct rtable *)odst; + if (odst->obsolete && odst->ops->check(odst, 0) == NULL) { rt = ip_route_output_flow(sock_net(sk), &fl4, sk); if (IS_ERR(rt)) goto out; @@ -1037,8 +1038,7 @@ void ipv4_sk_update_pmtu(struct sk_buff *skb, struct sock *sk, u32 mtu) __ip_rt_update_pmtu((struct rtable *) rt->dst.path, &fl4, mtu); - dst = dst_check(&rt->dst, 0); - if (!dst) { + if (!dst_check(&rt->dst, 0)) { if (new) dst_release(&rt->dst); @@ -1050,10 +1050,11 @@ void ipv4_sk_update_pmtu(struct sk_buff *skb, struct sock *sk, u32 mtu) } if (new) - __sk_dst_set(sk, &rt->dst); + sk_dst_set(sk, &rt->dst); out: bh_unlock_sock(sk); + dst_release(odst); } EXPORT_SYMBOL_GPL(ipv4_sk_update_pmtu); -- cgit v1.2.3 From 13bbfb5c4eb4fc85bf977245f9b3624df0187184 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 26 May 2014 14:52:34 +0200 Subject: dma: cppi41: handle 0-length packets When a 0-length packet is received on the bus, desc->pd0 yields 1, which confuses the driver's users. This information is clearly wrong and not in accordance to the datasheet, but it's been observed on an AM335x board, very reproducible. Fix this by looking at bit 19 in PD2 of the completed packet. This bit will tell us if a zero-length packet was received on a queue. If it's set, ignore the value in PD0 and report a total length of 0 instead. Signed-off-by: Daniel Mack Signed-off-by: Vinod Koul --- drivers/dma/cppi41.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c index d028f36ae655..8f8b0b608875 100644 --- a/drivers/dma/cppi41.c +++ b/drivers/dma/cppi41.c @@ -86,6 +86,9 @@ #define USBSS_IRQ_PD_COMP (1 << 2) +/* Packet Descriptor */ +#define PD2_ZERO_LENGTH (1 << 19) + struct cppi41_channel { struct dma_chan chan; struct dma_async_tx_descriptor txd; @@ -307,7 +310,7 @@ static irqreturn_t cppi41_irq(int irq, void *data) __iormb(); while (val) { - u32 desc; + u32 desc, len; q_num = __fls(val); val &= ~(1 << q_num); @@ -319,9 +322,13 @@ static irqreturn_t cppi41_irq(int irq, void *data) q_num, desc); continue; } - c->residue = pd_trans_len(c->desc->pd6) - - pd_trans_len(c->desc->pd0); + if (c->desc->pd2 & PD2_ZERO_LENGTH) + len = 0; + else + len = pd_trans_len(c->desc->pd0); + + c->residue = pd_trans_len(c->desc->pd6) - len; dma_cookie_complete(&c->txd); c->txd.callback(c->txd.callback_param); } -- cgit v1.2.3 From d1a792f3b4072bfac4150bb62aa34917b77fdb6d Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Wed, 25 Jun 2014 13:00:33 +0100 Subject: Update imx-sdma cyclic handling to report residue I received a report this morning from one of the Novena developers that the behaviour of the iMX6 ASoC codec driver (using imx-pcm-dma.c) was sub-optimal under high system load. While there are issues relating to system load remaining, upon reviewing the ASoC imx-pcm-dma.c driver, it was noticed that it not using the residue support, because SDMA doesn't support it. This has the effect that SDMA has to make multiple calls into the ASoC and ALSA code, one for each period. Since ALSA's snd_pcm_elapsed() does not need to be called multiple times and it is entirely sufficient to call it once to update ALSA with the current buffer position via the pointer method, we can do better here. We can also avoid stopping the DMA entirely, just like real cyclic DMA implementations behave. While this means that we replay some old samples, this is a nicer behaviour than having audio stop and restart. The changes to achieve this are relatively minor - imx-sdma.c can track where the DMA is to the nearest descriptor boundary - it does this already when deciding how many callbacks to issue. In doing this, buf_tail always points at the descriptor which will complete next. The residue is defined by the bytes remaining to the end of the buffer, when the buffer is viewed as a single block of memory [start...end]. So, when we start out, there's a full buffer worth of residue, and this counts down as we approach the end of the buffer, eventually becoming zero at the end, before returning to the full buffer worth when we wrap back to the start. Moving the walking of the descriptors into the interrupt handler means that we can update the BD_DONE flag at interrupt time, thus avoiding a delayed tasklet stopping the cyclic DMA. This means that the residue can be calculated from (total descriptors - buf_tail) * descriptor size. This is what the change below does. We update imx-pcm-dma.c to remove the NO_RESIDUE flag since we now provide the residue. Signed-off-by: Russell King Tested-by: Shawn Guo Signed-off-by: Vinod Koul --- drivers/dma/imx-sdma.c | 22 ++++++++++++++++++---- sound/soc/fsl/imx-pcm-dma.c | 1 - 2 files changed, 18 insertions(+), 5 deletions(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 128714622bf5..14867e3ac8ff 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -255,6 +255,7 @@ struct sdma_channel { enum dma_slave_buswidth word_size; unsigned int buf_tail; unsigned int num_bd; + unsigned int period_len; struct sdma_buffer_descriptor *bd; dma_addr_t bd_phys; unsigned int pc_from_device, pc_to_device; @@ -592,6 +593,12 @@ static void sdma_event_disable(struct sdma_channel *sdmac, unsigned int event) } static void sdma_handle_channel_loop(struct sdma_channel *sdmac) +{ + if (sdmac->desc.callback) + sdmac->desc.callback(sdmac->desc.callback_param); +} + +static void sdma_update_channel_loop(struct sdma_channel *sdmac) { struct sdma_buffer_descriptor *bd; @@ -611,9 +618,6 @@ static void sdma_handle_channel_loop(struct sdma_channel *sdmac) bd->mode.status |= BD_DONE; sdmac->buf_tail++; sdmac->buf_tail %= sdmac->num_bd; - - if (sdmac->desc.callback) - sdmac->desc.callback(sdmac->desc.callback_param); } } @@ -669,6 +673,9 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id) int channel = fls(stat) - 1; struct sdma_channel *sdmac = &sdma->channel[channel]; + if (sdmac->flags & IMX_DMA_SG_LOOP) + sdma_update_channel_loop(sdmac); + tasklet_schedule(&sdmac->tasklet); __clear_bit(channel, &stat); @@ -1129,6 +1136,7 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic( sdmac->status = DMA_IN_PROGRESS; sdmac->buf_tail = 0; + sdmac->period_len = period_len; sdmac->flags |= IMX_DMA_SG_LOOP; sdmac->direction = direction; @@ -1225,9 +1233,15 @@ static enum dma_status sdma_tx_status(struct dma_chan *chan, struct dma_tx_state *txstate) { struct sdma_channel *sdmac = to_sdma_chan(chan); + u32 residue; + + if (sdmac->flags & IMX_DMA_SG_LOOP) + residue = (sdmac->num_bd - sdmac->buf_tail) * sdmac->period_len; + else + residue = sdmac->chn_count - sdmac->chn_real_count; dma_set_tx_state(txstate, chan->completed_cookie, chan->cookie, - sdmac->chn_count - sdmac->chn_real_count); + residue); return sdmac->status; } diff --git a/sound/soc/fsl/imx-pcm-dma.c b/sound/soc/fsl/imx-pcm-dma.c index 0849b7b83f0a..0db94f492e97 100644 --- a/sound/soc/fsl/imx-pcm-dma.c +++ b/sound/soc/fsl/imx-pcm-dma.c @@ -59,7 +59,6 @@ int imx_pcm_dma_init(struct platform_device *pdev) { return devm_snd_dmaengine_pcm_register(&pdev->dev, &imx_dmaengine_pcm_config, - SND_DMAENGINE_PCM_FLAG_NO_RESIDUE | SND_DMAENGINE_PCM_FLAG_COMPAT); } EXPORT_SYMBOL_GPL(imx_pcm_dma_init); -- cgit v1.2.3 From 951fda3d8c644597a1d5cdae14cab31567e754a1 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 17 Jun 2014 16:05:08 -0400 Subject: tmon: Check log file for common secuirty issues The tmon logging system blindly opens its log file on a static path, making it very easy for someone to redirect that log information to inappropriate places or overwrite other users data. Do some easy checking to make sure we're not logging to a symlink or a file owned by another user. Signed-off-by: Neil Horman Acked-by: Jacob Pan Signed-off-by: Zhang Rui --- tools/thermal/tmon/tmon.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/tools/thermal/tmon/tmon.c b/tools/thermal/tmon/tmon.c index b30f531173e4..059e0becb386 100644 --- a/tools/thermal/tmon/tmon.c +++ b/tools/thermal/tmon/tmon.c @@ -142,6 +142,7 @@ static void start_syslog(void) static void prepare_logging(void) { int i; + struct stat logstat; if (!logging) return; @@ -152,6 +153,29 @@ static void prepare_logging(void) return; } + if (lstat(TMON_LOG_FILE, &logstat) < 0) { + syslog(LOG_ERR, "Unable to stat log file %s\n", TMON_LOG_FILE); + fclose(tmon_log); + tmon_log = NULL; + return; + } + + /* The log file must be a regular file owned by us */ + if (S_ISLNK(logstat.st_mode)) { + syslog(LOG_ERR, "Log file is a symlink. Will not log\n"); + fclose(tmon_log); + tmon_log = NULL; + return; + } + + if (logstat.st_uid != getuid()) { + syslog(LOG_ERR, "We don't own the log file. Not logging\n"); + fclose(tmon_log); + tmon_log = NULL; + return; + } + + fprintf(tmon_log, "#----------- THERMAL SYSTEM CONFIG -------------\n"); for (i = 0; i < ptdata.nr_tz_sensor; i++) { char binding_str[33]; /* size of long + 1 */ -- cgit v1.2.3 From 4adccf9fc84aaf5e4d18442e163d549e0b603075 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 17 Jun 2014 16:05:09 -0400 Subject: tmon: set umask to a reasonable value Currently, the tmon umask value is set to 0, which means whatever the permission mask in the shell are when starting tmon in daemon mode are what the permissions of any created files will be. We should likely set something more explicit, so lets go with the usual 022 Signed-off-by: Neil Horman Acked-by: Jacob Pan Signed-off-by: Zhang Rui --- tools/thermal/tmon/tmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/thermal/tmon/tmon.c b/tools/thermal/tmon/tmon.c index 059e0becb386..09b7c3218334 100644 --- a/tools/thermal/tmon/tmon.c +++ b/tools/thermal/tmon/tmon.c @@ -355,7 +355,7 @@ static void start_daemon_mode() disable_tui(); /* change the file mode mask */ - umask(0); + umask(S_IWGRP | S_IWOTH); /* new SID for the daemon process */ sid = setsid(); -- cgit v1.2.3 From 0e2be4c1121ae3dc2771c4d9b99d4c39ea9577d8 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 1 Jul 2014 17:23:06 +0200 Subject: ARM: mvebu: fix SMP boot for Armada 38x and Armada 375 Z1 in big endian The SMP boot on Armada 38x and Armada 375 Z1 is currently broken in big-endian configurations, and this commit fixes it for both platforms. For Armada 375 Z1, the problem was in the armada_375_smp_cpu1_enable_code part of the code that gets copied to the Crypto SRAM as a work-around for an issue of the Z1 stepping. This piece of code was not switching the CPU core to big-endian, and not endian-swapping the value read from the Resume Address register (the value is stored little-endian). Due to the introduction of the conditional 'rev r1, r1' instruction, the offset between the 'ldr r0, [pc, #4]' instruction and the value it was looking is different between LE and BE configurations. To solve this, we instead use one 'adr' instruction followed by one 'ldr'. For Armada 38x, the problem was simply that the CPU core was not switched to big endian in the secondary CPU startup function. This change was tested in LE and BE configurations on Armada 385, Armada 375 Z1 and Armada 375 A0. Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1404228186-21203-1-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/headsmp-a9.S | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S index 5925366bc03c..da5bb292b91c 100644 --- a/arch/arm/mach-mvebu/headsmp-a9.S +++ b/arch/arm/mach-mvebu/headsmp-a9.S @@ -15,6 +15,8 @@ #include #include +#include + __CPUINIT #define CPU_RESUME_ADDR_REG 0xf10182d4 @@ -22,13 +24,18 @@ .global armada_375_smp_cpu1_enable_code_end armada_375_smp_cpu1_enable_code_start: - ldr r0, [pc, #4] +ARM_BE8(setend be) + adr r0, 1f + ldr r0, [r0] ldr r1, [r0] +ARM_BE8(rev r1, r1) mov pc, r1 +1: .word CPU_RESUME_ADDR_REG armada_375_smp_cpu1_enable_code_end: ENTRY(mvebu_cortex_a9_secondary_startup) +ARM_BE8(setend be) bl v7_invalidate_l1 b secondary_startup ENDPROC(mvebu_cortex_a9_secondary_startup) -- cgit v1.2.3 From 07b0f00964def8af9321cfd6c4a7e84f6362f728 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 26 Jun 2014 00:44:02 -0700 Subject: bnx2x: fix possible panic under memory stress While it is legal to kfree(NULL), it is not wise to use : put_page(virt_to_head_page(NULL)) BUG: unable to handle kernel paging request at ffffeba400000000 IP: [] virt_to_head_page+0x36/0x44 [bnx2x] Reported-by: Michel Lespinasse Signed-off-by: Eric Dumazet Cc: Ariel Elior Fixes: d46d132cc021 ("bnx2x: use netdev_alloc_frag()") Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 47c5814114e1..4b875da1c7ed 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -797,7 +797,8 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp, return; } - bnx2x_frag_free(fp, new_data); + if (new_data) + bnx2x_frag_free(fp, new_data); drop: /* drop the packet and keep the buffer in the bin */ DP(NETIF_MSG_RX_STATUS, -- cgit v1.2.3 From 76bb5ab8f6e3e7bebdcefec4146ff305e7d0b465 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 30 Jun 2014 15:47:32 -0400 Subject: cpuset: break kernfs active protection in cpuset_write_resmask() Writing to either "cpuset.cpus" or "cpuset.mems" file flushes cpuset_hotplug_work so that cpu or memory hotunplug doesn't end up migrating tasks off a cpuset after new resources are added to it. As cpuset_hotplug_work calls into cgroup core via cgroup_transfer_tasks(), this flushing adds the dependency to cgroup core locking from cpuset_write_resmak(). This used to be okay because cgroup interface files were protected by a different mutex; however, 8353da1f91f1 ("cgroup: remove cgroup_tree_mutex") simplified the cgroup core locking and this dependency became a deadlock hazard - cgroup file removal performed under cgroup core lock tries to drain on-going file operation which is trying to flush cpuset_hotplug_work blocked on the same cgroup core lock. The locking simplification was done because kernfs added an a lot easier way to deal with circular dependencies involving kernfs active protection. Let's use the same strategy in cpuset and break active protection in cpuset_write_resmask(). While it isn't the prettiest, this is a very rare, likely unique, situation which also goes away on the unified hierarchy. The commands to trigger the deadlock warning without the patch and the lockdep output follow. localhost:/ # mount -t cgroup -o cpuset xxx /cpuset localhost:/ # mkdir /cpuset/tmp localhost:/ # echo 1 > /cpuset/tmp/cpuset.cpus localhost:/ # echo 0 > cpuset/tmp/cpuset.mems localhost:/ # echo $$ > /cpuset/tmp/tasks localhost:/ # echo 0 > /sys/devices/system/cpu/cpu1/online ====================================================== [ INFO: possible circular locking dependency detected ] 3.16.0-rc1-0.1-default+ #7 Not tainted ------------------------------------------------------- kworker/1:0/32649 is trying to acquire lock: (cgroup_mutex){+.+.+.}, at: [] cgroup_transfer_tasks+0x37/0x150 but task is already holding lock: (cpuset_hotplug_work){+.+...}, at: [] process_one_work+0x192/0x520 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (cpuset_hotplug_work){+.+...}: ... -> #1 (s_active#175){++++.+}: ... -> #0 (cgroup_mutex){+.+.+.}: ... other info that might help us debug this: Chain exists of: cgroup_mutex --> s_active#175 --> cpuset_hotplug_work Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpuset_hotplug_work); lock(s_active#175); lock(cpuset_hotplug_work); lock(cgroup_mutex); *** DEADLOCK *** 2 locks held by kworker/1:0/32649: #0: ("events"){.+.+.+}, at: [] process_one_work+0x192/0x520 #1: (cpuset_hotplug_work){+.+...}, at: [] process_one_work+0x192/0x520 stack backtrace: CPU: 1 PID: 32649 Comm: kworker/1:0 Not tainted 3.16.0-rc1-0.1-default+ #7 ... Call Trace: [] dump_stack+0x72/0x8a [] print_circular_bug+0x10f/0x120 [] check_prev_add+0x43e/0x4b0 [] validate_chain+0x656/0x7c0 [] __lock_acquire+0x382/0x660 [] lock_acquire+0xf9/0x170 [] mutex_lock_nested+0x6f/0x380 [] cgroup_transfer_tasks+0x37/0x150 [] hotplug_update_tasks_insane+0x110/0x1d0 [] cpuset_hotplug_update_tasks+0x13d/0x180 [] cpuset_hotplug_workfn+0x18c/0x630 [] process_one_work+0x254/0x520 [] worker_thread+0x13d/0x3d0 [] kthread+0xf8/0x100 [] ret_from_fork+0x7c/0xb0 Signed-off-by: Tejun Heo Reported-by: Li Zefan Tested-by: Li Zefan --- kernel/cpuset.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index d3df02e76643..116a4164720a 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -1623,7 +1623,17 @@ static ssize_t cpuset_write_resmask(struct kernfs_open_file *of, * resources, wait for the previously scheduled operations before * proceeding, so that we don't end up keep removing tasks added * after execution capability is restored. + * + * cpuset_hotplug_work calls back into cgroup core via + * cgroup_transfer_tasks() and waiting for it from a cgroupfs + * operation like this one can lead to a deadlock through kernfs + * active_ref protection. Let's break the protection. Losing the + * protection is okay as we check whether @cs is online after + * grabbing cpuset_mutex anyway. This only happens on the legacy + * hierarchies. */ + css_get(&cs->css); + kernfs_break_active_protection(of->kn); flush_work(&cpuset_hotplug_work); mutex_lock(&cpuset_mutex); @@ -1651,6 +1661,8 @@ static ssize_t cpuset_write_resmask(struct kernfs_open_file *of, free_trial_cpuset(trialcs); out_unlock: mutex_unlock(&cpuset_mutex); + kernfs_unbreak_active_protection(of->kn); + css_put(&cs->css); return retval ?: nbytes; } -- cgit v1.2.3 From 330d282216d6e4d845a21b72572dc4df4122e8fa Mon Sep 17 00:00:00 2001 From: Zhengyu He Date: Tue, 1 Jul 2014 12:11:47 -0700 Subject: core: fix typo in percpu read_mostly section This fixes a typo that named the read_mostly section of percpu as readmostly. It works fine with SMP because the linker script specifies .data..percpu..readmostly. However, UP kernel builds don't have percpu sections defined and the non-percpu version of the section is called data..read_mostly, so .data..readmostly will float around and may break things unexpectedly. Looking at the original change that introduced data..percpu..readmostly (commit c957ef2c59e952803766ddc22e89981ab534606f), it looks like this was the original intention. Tested: Built UP kernel and confirmed the sections got merged. - Before the patch: $ objdump -h vmlinux.o | grep '\.data\.\.read.*mostly' 38 .data..read_mostly 00004418 0000000000000000 0000000000000000 00431ac0 2**6 50 .data..readmostly 00000014 0000000000000000 0000000000000000 00444000 2**3 - After the patch: $ objdump -h vmlinux.o | grep '\.data\.\.read.*mostly' 38 .data..read_mostly 00004438 0000000000000000 0000000000000000 00431ac0 2**6 Signed-off-by: Zhengyu He Signed-off-by: Filipe Brandenburger Signed-off-by: Tejun Heo --- include/asm-generic/vmlinux.lds.h | 2 +- include/linux/percpu-defs.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 471ba48c7ae4..c1c0b0cf39b4 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -693,7 +693,7 @@ . = ALIGN(PAGE_SIZE); \ *(.data..percpu..page_aligned) \ . = ALIGN(cacheline); \ - *(.data..percpu..readmostly) \ + *(.data..percpu..read_mostly) \ . = ALIGN(cacheline); \ *(.data..percpu) \ *(.data..percpu..shared_aligned) \ diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h index a5fc7d01aad6..dec01d6c3f80 100644 --- a/include/linux/percpu-defs.h +++ b/include/linux/percpu-defs.h @@ -146,10 +146,10 @@ * Declaration/definition used for per-CPU variables that must be read mostly. */ #define DECLARE_PER_CPU_READ_MOSTLY(type, name) \ - DECLARE_PER_CPU_SECTION(type, name, "..readmostly") + DECLARE_PER_CPU_SECTION(type, name, "..read_mostly") #define DEFINE_PER_CPU_READ_MOSTLY(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, "..readmostly") + DEFINE_PER_CPU_SECTION(type, name, "..read_mostly") /* * Intermodule exports for per-CPU variables. sparse forgets about -- cgit v1.2.3 From 3b140a678834f55602e50e7d6a47663e230434a7 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 26 Jun 2014 10:06:44 -0700 Subject: net: systemport: do not clear IFF_MULTICAST flag The SYSTEMPORT Ethernet MAC supports multicast just fine, it just lacks any sort of Unicast/Broadcast/Multicasting filtering at the Ethernet MAC level since that is handled by the front end Ethernet switch, but that is properly handled by bcm_sysport_set_rx_mode(). Some user-space applications might be relying on the presence of this flag to prevent using multicast sockets, this also prevents that interface from joining the IPv6 all-router mcast group. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bcmsysport.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index 141160ef249a..f6bccd847ee6 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -1589,12 +1589,6 @@ static int bcm_sysport_probe(struct platform_device *pdev) BUILD_BUG_ON(sizeof(struct bcm_tsb) != 8); dev->needed_headroom += sizeof(struct bcm_tsb); - /* We are interfaced to a switch which handles the multicast - * filtering for us, so we do not support programming any - * multicast hash table in this Ethernet MAC. - */ - dev->flags &= ~IFF_MULTICAST; - /* libphy will adjust the link state accordingly */ netif_carrier_off(dev); -- cgit v1.2.3 From 412bce83ac786197d0b2805c5bcded4d95cdeeb0 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 26 Jun 2014 10:06:45 -0700 Subject: net: systemport: fix UniMAC reset logic The UniMAC CMD_SW_RESET bit is not a self-clearing bit, so we need to assert it, wait a bit and clear it manually. As a result, umac_reset() is updated not to return any value. The previous version of the code simply wrote 0 to the CMD register, which would make the busy-waiting loop exit immediately, having zero effect. By writing 0 to the CMD register, we were clearing all bits in the CMD register, and not using the hardware reset default values which are set on purpose. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bcmsysport.c | 33 ++++++++---------------------- 1 file changed, 9 insertions(+), 24 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index f6bccd847ee6..d31f7d239064 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -1254,28 +1254,17 @@ static inline void umac_enable_set(struct bcm_sysport_priv *priv, usleep_range(1000, 2000); } -static inline int umac_reset(struct bcm_sysport_priv *priv) +static inline void umac_reset(struct bcm_sysport_priv *priv) { - unsigned int timeout = 0; u32 reg; - int ret = 0; - - umac_writel(priv, 0, UMAC_CMD); - while (timeout++ < 1000) { - reg = umac_readl(priv, UMAC_CMD); - if (!(reg & CMD_SW_RESET)) - break; - - udelay(1); - } - - if (timeout == 1000) { - dev_err(&priv->pdev->dev, - "timeout waiting for MAC to come out of reset\n"); - ret = -ETIMEDOUT; - } - return ret; + reg = umac_readl(priv, UMAC_CMD); + reg |= CMD_SW_RESET; + umac_writel(priv, reg, UMAC_CMD); + udelay(10); + reg = umac_readl(priv, UMAC_CMD); + reg &= ~CMD_SW_RESET; + umac_writel(priv, reg, UMAC_CMD); } static void umac_set_hw_addr(struct bcm_sysport_priv *priv, @@ -1303,11 +1292,7 @@ static int bcm_sysport_open(struct net_device *dev) int ret; /* Reset UniMAC */ - ret = umac_reset(priv); - if (ret) { - netdev_err(dev, "UniMAC reset failed\n"); - return ret; - } + umac_reset(priv); /* Flush TX and RX FIFOs at TOPCTRL level */ topctrl_flush(priv); -- cgit v1.2.3 From 16f62d9bed0cdee5f9341b64cc7144869282122d Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 26 Jun 2014 10:06:46 -0700 Subject: net: systemport: fix TX NAPI work done return value Although we do not limit the number of packets the TX completion function bcm_sysport_tx_reclaim() is allowed to reclaim, we were still using its return value as-is. This means that we could hit the WARN() in net/core/dev.c where work_done >= budget. Make sure we do exit the NAPI context when the TX ring is empty, and pretend there was no work to do. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bcmsysport.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index d31f7d239064..5776e503e4c5 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -654,13 +654,13 @@ static int bcm_sysport_tx_poll(struct napi_struct *napi, int budget) work_done = bcm_sysport_tx_reclaim(ring->priv, ring); - if (work_done < budget) { + if (work_done == 0) { napi_complete(napi); /* re-enable TX interrupt */ intrl2_1_mask_clear(ring->priv, BIT(ring->index)); } - return work_done; + return 0; } static void bcm_sysport_tx_reclaim_all(struct bcm_sysport_priv *priv) -- cgit v1.2.3 From 0f50ce96b7c0488cffe64255694a2451b4347d09 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 26 Jun 2014 10:26:20 -0700 Subject: net: bcmgenet: disable clock before register_netdev As soon as register_netdev() is called, the network device notifiers are running which means that other parts of the kernel, or user-space programs can call the network device ndo_open() callback and use the interface. Disable the Ethernet device clock before we register the network device such that we do not create the following situation: CPU0 CPU1 register_netdev() bcmgenet_open() clk_prepare_enable() clk_disable_unprepare() and leave the hardware block gated off, while we think it should be gated on. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 5ba1cfbd60da..d17953cc5f49 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2535,14 +2535,14 @@ static int bcmgenet_probe(struct platform_device *pdev) netif_set_real_num_tx_queues(priv->dev, priv->hw_params->tx_queues + 1); netif_set_real_num_rx_queues(priv->dev, priv->hw_params->rx_queues + 1); - err = register_netdev(dev); - if (err) - goto err_clk_disable; - /* Turn off the main clock, WOL clock is handled separately */ if (!IS_ERR(priv->clk)) clk_disable_unprepare(priv->clk); + err = register_netdev(dev); + if (err) + goto err; + return err; err_clk_disable: -- cgit v1.2.3 From 219575eb6311ad090e26c675a6e217f5d48780a3 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 26 Jun 2014 10:26:21 -0700 Subject: net: bcmgenet: start with carrier off We use the PHY library which will determine the link state for us, make sure we start with a carrier off until libphy has completed the link training. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index d17953cc5f49..e51e462bc8fd 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2535,6 +2535,9 @@ static int bcmgenet_probe(struct platform_device *pdev) netif_set_real_num_tx_queues(priv->dev, priv->hw_params->tx_queues + 1); netif_set_real_num_rx_queues(priv->dev, priv->hw_params->rx_queues + 1); + /* libphy will determine the link state */ + netif_carrier_off(dev); + /* Turn off the main clock, WOL clock is handled separately */ if (!IS_ERR(priv->clk)) clk_disable_unprepare(priv->clk); -- cgit v1.2.3 From b758858c5ceb1b30ae7d04dea6c74821bd7c7d69 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 26 Jun 2014 10:26:22 -0700 Subject: net: bcmgenet: do not set packet length for RX buffers Hardware will provide this information as soon as we will start processing incoming packets, so there is no need to set the RX buffer length during buffer allocation. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index e51e462bc8fd..16281ad2da12 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -1408,13 +1408,6 @@ static int bcmgenet_alloc_rx_buffers(struct bcmgenet_priv *priv) if (cb->skb) continue; - /* set the DMA descriptor length once and for all - * it will only change if we support dynamically sizing - * priv->rx_buf_len, but we do not - */ - dmadesc_set_length_status(priv, priv->rx_bd_assign_ptr, - priv->rx_buf_len << DMA_BUFLENGTH_SHIFT); - ret = bcmgenet_rx_refill(priv, cb); if (ret) break; -- cgit v1.2.3 From 4332ec1a99510943e50acbe03d6c023d5e327093 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 17 Jun 2014 17:03:24 +0300 Subject: clk: ti: am43x: Fix boot with CONFIG_SOC_AM33XX disabled Define ti_clk_register_dpll_x2() and of_ti_am3_dpll_x2_setup() if AM43XX is defined. Fixes the below boot issue. [ 2.157258] gpmc_l3_clk not enabled [ 2.161194] gpmc_l3_clk not enabled [ 2.164896] Division by zero in kernel. [ 2.169055] CPU: 0 PID: 321 Comm: kworker/u2:2 Tainted: G W 3.16.0-rc1-00008-g4c0e520 #273 [ 2.178880] Workqueue: deferwq deferred_probe_work_func [ 2.184459] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 2.192752] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 2.200486] [] (dump_stack) from [] (Ldiv0+0x8/0x10) [ 2.207678] [] (Ldiv0) from [] (gpmc_calc_divider+0x24/0x40) [ 2.215490] [] (gpmc_calc_divider) from [] (gpmc_cs_set_timings+0x18/0x474) [ 2.224783] [] (gpmc_cs_set_timings) from [] (gpmc_nand_init+0x74/0x1a8) [ 2.233791] [] (gpmc_nand_init) from [] (gpmc_probe+0x52c/0x874) [ 2.242089] [] (gpmc_probe) from [] (platform_drv_probe+0x18/0x48) [ 2.250534] [] (platform_drv_probe) from [] (driver_probe_device+0x104/0x22c) [ 2.259988] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 2.269087] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 2.277620] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 2.286074] [] (bus_probe_device) from [] (deferred_probe_work_func+0x60/0x90) [ 2.295611] [] (deferred_probe_work_func) from [] (process_one_work+0x1b4/0x4bc) [ 2.305288] [] (process_one_work) from [] (worker_thread+0x148/0x550) [ 2.313954] [] (worker_thread) from [] (kthread+0xc8/0xe4) [ 2.321628] [] (kthread) from [] (ret_from_fork+0x14/0x2c) Signed-off-by: Roger Quadros Signed-off-by: Mike Turquette --- drivers/clk/ti/dpll.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index abd956d5f838..79791e1bf282 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -161,7 +161,8 @@ cleanup: } #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ - defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) || \ + defined(CONFIG_SOC_AM43XX) /** * ti_clk_register_dpll_x2 - Registers a DPLLx2 clock * @node: device node for this clock @@ -322,7 +323,7 @@ CLK_OF_DECLARE(ti_omap4_dpll_x2_clock, "ti,omap4-dpll-x2-clock", of_ti_omap4_dpll_x2_setup); #endif -#ifdef CONFIG_SOC_AM33XX +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) static void __init of_ti_am3_dpll_x2_setup(struct device_node *node) { ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops, NULL); -- cgit v1.2.3 From 2a96dfa49c83a2a7cbdb11382976aaa6b2636764 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 27 Jun 2014 14:21:10 +0200 Subject: clk: s2mps11: Fix double free corruption during driver unbind After unbinding the driver memory was corrupted by double free of clk_lookup structure. This lead to OOPS when re-binding the driver again. The driver allocated memory for 'clk_lookup' with devm_kzalloc. During driver removal this memory was freed twice: once by clkdev_drop() and second by devm code. Kernel panic log: [ 30.839284] Unable to handle kernel paging request at virtual address 5f343173 [ 30.846476] pgd = dee14000 [ 30.849165] [5f343173] *pgd=00000000 [ 30.852703] Internal error: Oops: 805 [#1] PREEMPT SMP ARM [ 30.858166] Modules linked in: [ 30.861208] CPU: 0 PID: 1 Comm: bash Not tainted 3.16.0-rc2-00239-g94bdf617b07e-dirty #40 [ 30.869364] task: df478000 ti: df480000 task.ti: df480000 [ 30.874752] PC is at clkdev_add+0x2c/0x38 [ 30.878738] LR is at clkdev_add+0x18/0x38 [ 30.882732] pc : [] lr : [] psr: 60000013 [ 30.882732] sp : df481e78 ip : 00000001 fp : c0700ed8 [ 30.894187] r10: 0000000c r9 : 00000000 r8 : c07b0e3c [ 30.899396] r7 : 00000002 r6 : df45f9d0 r5 : df421390 r4 : c0700d6c [ 30.905906] r3 : 5f343173 r2 : c0700d84 r1 : 60000013 r0 : c0700d6c [ 30.912417] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 30.919534] Control: 10c53c7d Table: 5ee1406a DAC: 00000015 [ 30.925262] Process bash (pid: 1, stack limit = 0xdf480240) [ 30.930817] Stack: (0xdf481e78 to 0xdf482000) [ 30.935159] 1e60: 00001000 df6de610 [ 30.943321] 1e80: df7f4558 c0355650 c05ec6ec c0700eb0 df6de600 df7f4510 dec9d69c 00000014 [ 30.951480] 1ea0: 00167b48 df6de610 c0700e30 c0713518 00000000 c0700e30 dec9d69c 00000006 [ 30.959639] 1ec0: 00167b48 c02c1b7c c02c1b64 df6de610 c07aff48 c02c0420 c06fb150 c047cc20 [ 30.967798] 1ee0: df6de610 df6de610 c0700e30 df6de644 c06fb150 0000000c dec9d690 c02bef90 [ 30.975957] 1f00: dec9c6c0 dece4c00 df481f80 dece4c00 0000000c c02be73c 0000000c c016ca8c [ 30.984116] 1f20: c016ca48 00000000 00000000 c016c1f4 00000000 00000000 b6f18000 df481f80 [ 30.992276] 1f40: df7f66c0 0000000c df480000 df480000 b6f18000 c011094c df47839c 60000013 [ 31.000435] 1f60: 00000000 00000000 df7f66c0 df7f66c0 0000000c df480000 b6f18000 c0110dd4 [ 31.008594] 1f80: 00000000 00000000 0000000c b6ec05d8 0000000c b6f18000 00000004 c000f2a8 [ 31.016753] 1fa0: 00001000 c000f0e0 b6ec05d8 0000000c 00000001 b6f18000 0000000c 00000000 [ 31.024912] 1fc0: b6ec05d8 0000000c b6f18000 00000004 0000000c 00000001 00000000 00167b48 [ 31.033071] 1fe0: 00000000 bed83a80 b6e004f0 b6e5122c 60000010 00000001 ffffffff ffffffff [ 31.041248] [] (clkdev_add) from [] (s2mps11_clk_probe+0x2b4/0x3b4) [ 31.049223] [] (s2mps11_clk_probe) from [] (platform_drv_probe+0x18/0x48) [ 31.057728] [] (platform_drv_probe) from [] (driver_probe_device+0x13c/0x384) [ 31.066579] [] (driver_probe_device) from [] (bind_store+0x88/0xd8) [ 31.074564] [] (bind_store) from [] (drv_attr_store+0x20/0x2c) [ 31.082118] [] (drv_attr_store) from [] (sysfs_kf_write+0x44/0x48) [ 31.090016] [] (sysfs_kf_write) from [] (kernfs_fop_write+0xc0/0x17c) [ 31.098176] [] (kernfs_fop_write) from [] (vfs_write+0xa0/0x1c4) [ 31.105899] [] (vfs_write) from [] (SyS_write+0x40/0x8c) [ 31.112931] [] (SyS_write) from [] (ret_fast_syscall+0x0/0x3c) [ 31.120481] Code: e2842018 e584501c e1a00004 e885000c (e5835000) [ 31.126596] ---[ end trace efad45bfa3a61b05 ]--- [ 31.131181] Kernel panic - not syncing: Fatal exception [ 31.136368] CPU1: stopping [ 31.139054] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.16.0-rc2-00239-g94bdf617b07e-dirty #40 [ 31.148697] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 31.156419] [] (show_stack) from [] (dump_stack+0x80/0xcc) [ 31.163622] [] (dump_stack) from [] (handle_IPI+0x130/0x15c) [ 31.170998] [] (handle_IPI) from [] (gic_handle_irq+0x60/0x68) [ 31.178549] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x70) [ 31.186009] Exception stack(0xdf4bdf88 to 0xdf4bdfd0) [ 31.191046] df80: ffffffed 00000000 00000000 00000000 df4bc000 c06d042c [ 31.199207] dfa0: 00000000 ffffffed c06d03c0 00000000 c070c288 00000000 00000000 df4bdfd0 [ 31.207363] dfc0: c0010324 c0010328 60000013 ffffffff [ 31.212402] [] (__irq_svc) from [] (arch_cpu_idle+0x28/0x30) [ 31.219783] [] (arch_cpu_idle) from [] (cpu_startup_entry+0x2c4/0x3f0) [ 31.228027] [] (cpu_startup_entry) from [<400086c4>] (0x400086c4) [ 31.234968] ---[ end Kernel panic - not syncing: Fatal exception Fixes: 7cc560dea415 ("clk: s2mps11: Add support for s2mps11") Cc: Signed-off-by: Krzysztof Kozlowski Reviewed-by: Yadwinder Singh Brar Signed-off-by: Mike Turquette --- drivers/clk/clk-s2mps11.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c index 9b7b5859a420..3757e9e72d37 100644 --- a/drivers/clk/clk-s2mps11.c +++ b/drivers/clk/clk-s2mps11.c @@ -230,16 +230,13 @@ static int s2mps11_clk_probe(struct platform_device *pdev) goto err_reg; } - s2mps11_clk->lookup = devm_kzalloc(&pdev->dev, - sizeof(struct clk_lookup), GFP_KERNEL); + s2mps11_clk->lookup = clkdev_alloc(s2mps11_clk->clk, + s2mps11_name(s2mps11_clk), NULL); if (!s2mps11_clk->lookup) { ret = -ENOMEM; goto err_lup; } - s2mps11_clk->lookup->con_id = s2mps11_name(s2mps11_clk); - s2mps11_clk->lookup->clk = s2mps11_clk->clk; - clkdev_add(s2mps11_clk->lookup); } -- cgit v1.2.3 From 3896c329df8092661dac80f55a8c3f60136fd61a Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 24 Jun 2014 14:48:19 +0200 Subject: x86, tsc: Fix cpufreq lockup Mauro reported that his AMD X2 using the powernow-k8 cpufreq driver locked up when doing cpu hotplug. Because we called set_cyc2ns_scale() from the time_cpufreq_notifier() unconditionally, it gets called multiple times for each freq change, instead of only the once, when the tsc_khz value actually changes. Because it gets called more than once, we run out of cyc2ns data slots and stall, waiting for a free one, but because we're half way offline, there's no consumers to free slots. By placing the call inside the condition that actually changes tsc_khz we avoid superfluous calls and avoid the problem. Reported-by: Mauro Tested-by: Mauro Fixes: 20d1c86a5776 ("sched/clock, x86: Rewrite cyc2ns() to avoid the need to disable IRQs") Cc: Cc: "Rafael J. Wysocki" Cc: Viresh Kumar Cc: Bin Gao Cc: Linus Torvalds Cc: Mika Westerberg Cc: Paul Gortmaker Cc: Stefani Seibold Cc: linux-kernel@vger.kernel.org Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- arch/x86/kernel/tsc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 57e5ce126d5a..ea030319b321 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -920,9 +920,9 @@ static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new); if (!(freq->flags & CPUFREQ_CONST_LOOPS)) mark_tsc_unstable("cpufreq changes"); - } - set_cyc2ns_scale(tsc_khz, freq->cpu); + set_cyc2ns_scale(tsc_khz, freq->cpu); + } return 0; } -- cgit v1.2.3 From b6220ad66bcd4a50737eb3c08e9466aa44f3bc98 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 24 Jun 2014 18:05:29 -0700 Subject: sched: Fix compiler warnings Commit 143e1e28cb (sched: Rework sched_domain topology definition) introduced a number of functions with a return value of 'const int'. gcc doesn't know what to do with that and, if the kernel is compiled with W=1, complains with the following warnings whenever sched.h is included. include/linux/sched.h:875:25: warning: type qualifiers ignored on function return type include/linux/sched.h:882:25: warning: type qualifiers ignored on function return type include/linux/sched.h:889:25: warning: type qualifiers ignored on function return type include/linux/sched.h:1002:21: warning: type qualifiers ignored on function return type Commits fb2aa855 (sched, ARM: Create a dedicated scheduler topology table) and 607b45e9a (sched, powerpc: Create a dedicated topology table) introduce the same warning in the arm and powerpc code. Drop 'const' from the function declarations to fix the problem. The fix for all three patches has to be applied together to avoid compilation failures for the affected architectures. Acked-by: Vincent Guittot Acked-by: Benjamin Herrenschmidt Signed-off-by: Guenter Roeck Cc: Russell King Cc: Paul Mackerras Cc: Dietmar Eggemann Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1403658329-13196-1-git-send-email-linux@roeck-us.net Signed-off-by: Ingo Molnar --- arch/arm/kernel/topology.c | 2 +- arch/powerpc/kernel/smp.c | 2 +- include/linux/sched.h | 8 ++++---- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 9d853189028b..e35d880f9773 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -275,7 +275,7 @@ void store_cpu_topology(unsigned int cpuid) cpu_topology[cpuid].socket_id, mpidr); } -static inline const int cpu_corepower_flags(void) +static inline int cpu_corepower_flags(void) { return SD_SHARE_PKG_RESOURCES | SD_SHARE_POWERDOMAIN; } diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 51a3ff78838a..1007fb802e6b 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -747,7 +747,7 @@ int setup_profiling_timer(unsigned int multiplier) #ifdef CONFIG_SCHED_SMT /* cpumask of CPUs with asymetric SMT dependancy */ -static const int powerpc_smt_flags(void) +static int powerpc_smt_flags(void) { int flags = SD_SHARE_CPUCAPACITY | SD_SHARE_PKG_RESOURCES; diff --git a/include/linux/sched.h b/include/linux/sched.h index 306f4f0c987a..0376b054a0d0 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -872,21 +872,21 @@ enum cpu_idle_type { #define SD_NUMA 0x4000 /* cross-node balancing */ #ifdef CONFIG_SCHED_SMT -static inline const int cpu_smt_flags(void) +static inline int cpu_smt_flags(void) { return SD_SHARE_CPUCAPACITY | SD_SHARE_PKG_RESOURCES; } #endif #ifdef CONFIG_SCHED_MC -static inline const int cpu_core_flags(void) +static inline int cpu_core_flags(void) { return SD_SHARE_PKG_RESOURCES; } #endif #ifdef CONFIG_NUMA -static inline const int cpu_numa_flags(void) +static inline int cpu_numa_flags(void) { return SD_NUMA; } @@ -999,7 +999,7 @@ void free_sched_domains(cpumask_var_t doms[], unsigned int ndoms); bool cpus_share_cache(int this_cpu, int that_cpu); typedef const struct cpumask *(*sched_domain_mask_f)(int cpu); -typedef const int (*sched_domain_flags_f)(void); +typedef int (*sched_domain_flags_f)(void); #define SDTL_OVERLAP 0x01 -- cgit v1.2.3 From b292d7a10487aee6e74b1c18b8d95b92f40d4a4f Mon Sep 17 00:00:00 2001 From: HATAYAMA Daisuke Date: Wed, 25 Jun 2014 10:09:07 +0900 Subject: perf/x86/intel: ignore CondChgd bit to avoid false NMI handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently, any NMI is falsely handled by a NMI handler of NMI watchdog if CondChgd bit in MSR_CORE_PERF_GLOBAL_STATUS MSR is set. For example, we use external NMI to make system panic to get crash dump, but in this case, the external NMI is falsely handled do to the issue. This commit deals with the issue simply by ignoring CondChgd bit. Here is explanation in detail. On x86 NMI watchdog uses performance monitoring feature to periodically signal NMI each time performance counter gets overflowed. intel_pmu_handle_irq() is called as a NMI_LOCAL handler from a NMI handler of NMI watchdog, perf_event_nmi_handler(). It identifies an owner of a given NMI by looking at overflow status bits in MSR_CORE_PERF_GLOBAL_STATUS MSR. If some of the bits are set, then it handles the given NMI as its own NMI. The problem is that the intel_pmu_handle_irq() doesn't distinguish CondChgd bit from other bits. Unlike the other status bits, CondChgd bit doesn't represent overflow status for performance counters. Thus, CondChgd bit cannot be thought of as a mark indicating a given NMI is NMI watchdog's. As a result, if CondChgd bit is set, any NMI is falsely handled by the NMI handler of NMI watchdog. Also, if type of the falsely handled NMI is either NMI_UNKNOWN, NMI_SERR or NMI_IO_CHECK, the corresponding action is never performed until CondChgd bit is cleared. I noticed this behavior on systems with Ivy Bridge processors: Intel Xeon CPU E5-2630 v2 and Intel Xeon CPU E7-8890 v2. On both systems, CondChgd bit in MSR_CORE_PERF_GLOBAL_STATUS MSR has already been set in the beginning at boot. Then the CondChgd bit is immediately cleared by next wrmsr to MSR_CORE_PERF_GLOBAL_CTRL MSR and appears to remain 0. On the other hand, on older processors such as Nehalem, Xeon E7540, CondChgd bit is not set in the beginning at boot. I'm not sure about exact behavior of CondChgd bit, in particular when this bit is set. Although I read Intel System Programmer's Manual to figure out that, the descriptions I found are: In 18.9.1: "The MSR_PERF_GLOBAL_STATUS MSR also provides a ¡sticky bit¢ to indicate changes to the state of performancmonitoring hardware" In Table 35-2 IA-32 Architectural MSRs 63 CondChg: status bits of this register has changed. These are different from the bahviour I see on the actual system as I explained above. At least, I think ignoring CondChgd bit should be enough for NMI watchdog perspective. Signed-off-by: HATAYAMA Daisuke Acked-by: Don Zickus Signed-off-by: Peter Zijlstra Cc: Cc: Arnaldo Carvalho de Melo Cc: Linus Torvalds Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/20140625.103503.409316067.d.hatayama@jp.fujitsu.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_intel.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index adb02aa62af5..07846d738bdb 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -1381,6 +1381,15 @@ again: intel_pmu_lbr_read(); + /* + * CondChgd bit 63 doesn't mean any overflow status. Ignore + * and clear the bit. + */ + if (__test_and_clear_bit(63, (unsigned long *)&status)) { + if (!status) + goto done; + } + /* * PEBS overflow sets bit 62 in the global status register */ -- cgit v1.2.3 From 1f9a7268c67f0290837aada443d28fd953ddca90 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Tue, 24 Jun 2014 10:20:25 +0200 Subject: perf: Do not allow optimized switch for non-cloned events The context check in perf_event_context_sched_out allows non-cloned context to be part of the optimized schedule out switch. This could move non-cloned context into another workload child. Once this child exits, the context is closed and leaves all original (parent) events in closed state. Any other new cloned event will have closed state and not measure anything. And probably causing other odd bugs. Signed-off-by: Jiri Olsa Signed-off-by: Peter Zijlstra Cc: Cc: Arnaldo Carvalho de Melo Cc: Paul Mackerras Cc: Frederic Weisbecker Cc: Namhyung Kim Cc: Paul Mackerras Cc: Corey Ashford Cc: David Ahern Cc: Jiri Olsa Cc: Linus Torvalds Link: http://lkml.kernel.org/r/1403598026-2310-2-git-send-email-jolsa@kernel.org Signed-off-by: Ingo Molnar --- kernel/events/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index a33d9a2bcbd7..b0c95f0f06fd 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -2320,7 +2320,7 @@ static void perf_event_context_sched_out(struct task_struct *task, int ctxn, next_parent = rcu_dereference(next_ctx->parent_ctx); /* If neither context have a parent context; they cannot be clones. */ - if (!parent && !next_parent) + if (!parent || !next_parent) goto unlock; if (next_parent == ctx || next_ctx == parent || next_parent == parent) { -- cgit v1.2.3 From c3dcac875e35c2e67ccaef10ef62ae5b1410d29c Mon Sep 17 00:00:00 2001 From: Himangi Saraogi Date: Sat, 28 Jun 2014 22:53:55 +0530 Subject: clk: sunxi: fix devm_ioremap_resource error detection code devm_ioremap_resource returns an ERR_PTR value, not NULL, on failure. A simplified version of the semantic match that finds this problem is as follows: // @@ expression e,e1; statement S; @@ *e = devm_ioremap_resource(...); if (!e1) S // Signed-off-by: Himangi Saraogi Acked-by: Julia Lawall Acked-by Boris BREZILLON Signed-off-by: Mike Turquette --- drivers/clk/sunxi/clk-sun6i-apb0-gates.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/sunxi/clk-sun6i-apb0-gates.c b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c index 44cd27c5c401..670f90d629d7 100644 --- a/drivers/clk/sunxi/clk-sun6i-apb0-gates.c +++ b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c @@ -29,7 +29,7 @@ static int sun6i_a31_apb0_gates_clk_probe(struct platform_device *pdev) r = platform_get_resource(pdev, IORESOURCE_MEM, 0); reg = devm_ioremap_resource(&pdev->dev, r); - if (!reg) + if (IS_ERR(reg)) return PTR_ERR(reg); clk_parent = of_clk_get_parent_name(np, 0); -- cgit v1.2.3 From d9daa24720891a88bedb93928f57767da96e5c80 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Sat, 28 Jun 2014 01:23:35 +0200 Subject: net: fix circular dependency in of_mdio code Commit 86f6cf4127 (net: of_mdio: add of_mdiobus_link_phydev()) introduced a circular dependency between libphy and of_mdio. depmod: ERROR: /kernel/drivers/net/phy/libphy.ko in dependency cycle! depmod: ERROR: /kernel/drivers/of/of_mdio.ko in dependency cycle! The problem is that of_mdio.c references &mdio_bus_type and libphy now references of_mdiobus_link_phydev. Fix this by not exporting of_mdiobus_link_phydev() from of_mdio.ko. Make it a static function in mdio_bus.c instead. Signed-off-by: Daniel Mack Reported-by: Jeff Mahoney Fixes: 86f6cf4127 (net: of_mdio: add of_mdiobus_link_phydev()) Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/mdio_bus.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ drivers/of/of_mdio.c | 34 ---------------------------------- include/linux/of_mdio.h | 8 -------- 3 files changed, 44 insertions(+), 42 deletions(-) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 2e58aa54484c..4eaadcfcb0fe 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -187,6 +187,50 @@ struct mii_bus *of_mdio_find_bus(struct device_node *mdio_bus_np) return d ? to_mii_bus(d) : NULL; } EXPORT_SYMBOL(of_mdio_find_bus); + +/* Walk the list of subnodes of a mdio bus and look for a node that matches the + * phy's address with its 'reg' property. If found, set the of_node pointer for + * the phy. This allows auto-probed pyh devices to be supplied with information + * passed in via DT. + */ +static void of_mdiobus_link_phydev(struct mii_bus *mdio, + struct phy_device *phydev) +{ + struct device *dev = &phydev->dev; + struct device_node *child; + + if (dev->of_node || !mdio->dev.of_node) + return; + + for_each_available_child_of_node(mdio->dev.of_node, child) { + int addr; + int ret; + + ret = of_property_read_u32(child, "reg", &addr); + if (ret < 0) { + dev_err(dev, "%s has invalid PHY address\n", + child->full_name); + continue; + } + + /* A PHY must have a reg property in the range [0-31] */ + if (addr >= PHY_MAX_ADDR) { + dev_err(dev, "%s PHY address %i is too large\n", + child->full_name, addr); + continue; + } + + if (addr == phydev->addr) { + dev->of_node = child; + return; + } + } +} +#else /* !IS_ENABLED(CONFIG_OF_MDIO) */ +static inline void of_mdiobus_link_phydev(struct mii_bus *mdio, + struct phy_device *phydev) +{ +} #endif /** diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index a3bf2122a8d5..401b2453da45 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -182,40 +182,6 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) } EXPORT_SYMBOL(of_mdiobus_register); -/** - * of_mdiobus_link_phydev - Find a device node for a phy - * @mdio: pointer to mii_bus structure - * @phydev: phydev for which the of_node pointer should be set - * - * Walk the list of subnodes of a mdio bus and look for a node that matches the - * phy's address with its 'reg' property. If found, set the of_node pointer for - * the phy. This allows auto-probed pyh devices to be supplied with information - * passed in via DT. - */ -void of_mdiobus_link_phydev(struct mii_bus *mdio, - struct phy_device *phydev) -{ - struct device *dev = &phydev->dev; - struct device_node *child; - - if (dev->of_node || !mdio->dev.of_node) - return; - - for_each_available_child_of_node(mdio->dev.of_node, child) { - int addr; - - addr = of_mdio_parse_addr(&mdio->dev, child); - if (addr < 0) - continue; - - if (addr == phydev->addr) { - dev->of_node = child; - return; - } - } -} -EXPORT_SYMBOL(of_mdiobus_link_phydev); - /* Helper function for of_phy_find_device */ static int of_phy_match(struct device *dev, void *phy_np) { diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h index a70c9493d55a..d449018d0726 100644 --- a/include/linux/of_mdio.h +++ b/include/linux/of_mdio.h @@ -25,9 +25,6 @@ struct phy_device *of_phy_attach(struct net_device *dev, extern struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np); -extern void of_mdiobus_link_phydev(struct mii_bus *mdio, - struct phy_device *phydev); - #else /* CONFIG_OF */ static inline int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) { @@ -63,11 +60,6 @@ static inline struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np) { return NULL; } - -static inline void of_mdiobus_link_phydev(struct mii_bus *mdio, - struct phy_device *phydev) -{ -} #endif /* CONFIG_OF */ #if defined(CONFIG_OF) && defined(CONFIG_FIXED_PHY) -- cgit v1.2.3 From 48f7bc86b6e75bcb71441c77378c1cde6ecbe475 Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Thu, 23 Jan 2014 15:05:49 -0500 Subject: ARM: kprobes: Prevent known test failures stopping other tests running Due to a long-standing issue with Thumb symbol lookup [1] the jprobes tests fail when built into a kernel compiled as Thumb mode. (They work fine for ARM mode kernels or for Thumb when built as a loadable module.) Rather than have this problem terminate testing prematurely lets instead emit an error message and carry on with the main kprobes tests, delaying the final failure report until the end. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-August/063026.html Signed-off-by: Jon Medhurst --- arch/arm/kernel/kprobes-test.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c index 379639998d5a..08d731294bcd 100644 --- a/arch/arm/kernel/kprobes-test.c +++ b/arch/arm/kernel/kprobes-test.c @@ -225,6 +225,7 @@ static int pre_handler_called; static int post_handler_called; static int jprobe_func_called; static int kretprobe_handler_called; +static int tests_failed; #define FUNC_ARG1 0x12345678 #define FUNC_ARG2 0xabcdef @@ -461,6 +462,13 @@ static int run_api_tests(long (*func)(long, long)) pr_info(" jprobe\n"); ret = test_jprobe(func); +#if defined(CONFIG_THUMB2_KERNEL) && !defined(MODULE) + if (ret == -EINVAL) { + pr_err("FAIL: Known longtime bug with jprobe on Thumb kernels\n"); + tests_failed = ret; + ret = 0; + } +#endif if (ret < 0) return ret; @@ -1671,6 +1679,8 @@ static int __init run_all_tests(void) #endif out: + if (ret == 0) + ret = tests_failed; if (ret == 0) pr_info("Finished kprobe tests OK\n"); else -- cgit v1.2.3 From 272226007f436eff953c4398c1f5509cb74889ac Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Mon, 3 Mar 2014 15:08:30 +0000 Subject: ARM: kprobes: Disallow instructions with PC and register specified shift ARM data processing instructions which have a register specified shift are defined as UNPREDICTABLE if PC is used for any register, not just the shift value as the code was previous assuming. This issue manifests on A15 devices as either test case failures or undefined instructions aborts. Reported-by: David Long Signed-off-by: Jon Medhurst --- arch/arm/kernel/kprobes-test-arm.c | 22 ++++++++++++---------- arch/arm/kernel/probes-arm.c | 6 +++--- 2 files changed, 15 insertions(+), 13 deletions(-) diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index 9db4b659d03e..e73f9cff9225 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -74,8 +74,6 @@ void kprobe_arm_test_cases(void) TEST_RRR( op "lt" s " r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\ TEST_RR( op "gt" s " r12, r13" ", r",14,val, ", ror r",14,7,"")\ TEST_RR( op "le" s " r14, r",0, val, ", r13" ", lsl r",14,8,"")\ - TEST_RR( op s " r12, pc" ", r",14,val, ", ror r",14,7,"")\ - TEST_RR( op s " r14, r",0, val, ", pc" ", lsl r",14,8,"")\ TEST_R( op "eq" s " r0, r",11,VAL1,", #0xf5") \ TEST_R( op "ne" s " r11, r",0, VAL1,", #0xf5000000") \ TEST_R( op s " r7, r",8, VAL2,", #0x000af000") \ @@ -103,8 +101,6 @@ void kprobe_arm_test_cases(void) TEST_RRR( op "ge r",11,VAL1,", r",14,N(val),", asr r",7, 6,"") \ TEST_RR( op "le r13" ", r",14,val, ", ror r",14,7,"") \ TEST_RR( op "gt r",0, val, ", r13" ", lsl r",14,8,"") \ - TEST_RR( op " pc" ", r",14,val, ", ror r",14,7,"") \ - TEST_RR( op " r",0, val, ", pc" ", lsl r",14,8,"") \ TEST_R( op "eq r",11,VAL1,", #0xf5") \ TEST_R( op "ne r",0, VAL1,", #0xf5000000") \ TEST_R( op " r",8, VAL2,", #0x000af000") @@ -125,7 +121,6 @@ void kprobe_arm_test_cases(void) TEST_RR( op "ge" s " r11, r",11,N(val),", asr r",7, 6,"") \ TEST_RR( op "lt" s " r12, r",11,val, ", ror r",14,7,"") \ TEST_R( op "gt" s " r14, r13" ", lsl r",14,8,"") \ - TEST_R( op "le" s " r14, pc" ", lsl r",14,8,"") \ TEST( op "eq" s " r0, #0xf5") \ TEST( op "ne" s " r11, #0xf5000000") \ TEST( op s " r7, #0x000af000") \ @@ -159,12 +154,19 @@ void kprobe_arm_test_cases(void) TEST_SUPPORTED("cmp pc, #0x1000"); TEST_SUPPORTED("cmp sp, #0x1000"); - /* Data-processing with PC as shift*/ + /* Data-processing with PC and a shift count in a register */ TEST_UNSUPPORTED(__inst_arm(0xe15c0f1e) " @ cmp r12, r14, asl pc") TEST_UNSUPPORTED(__inst_arm(0xe1a0cf1e) " @ mov r12, r14, asl pc") TEST_UNSUPPORTED(__inst_arm(0xe08caf1e) " @ add r10, r12, r14, asl pc") - - /* Data-processing with PC as shift*/ + TEST_UNSUPPORTED(__inst_arm(0xe151021f) " @ cmp r1, pc, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe17f0211) " @ cmn pc, r1, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe1a0121f) " @ mov r1, pc, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe1a0f211) " @ mov pc, r1, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe042131f) " @ sub r1, r2, pc, lsl r3") + TEST_UNSUPPORTED(__inst_arm(0xe1cf1312) " @ bic r1, pc, r2, lsl r3") + TEST_UNSUPPORTED(__inst_arm(0xe081f312) " @ add pc, r1, r2, lsl r3") + + /* Data-processing with PC as a target and status registers updated */ TEST_UNSUPPORTED("movs pc, r1") TEST_UNSUPPORTED("movs pc, r1, lsl r2") TEST_UNSUPPORTED("movs pc, #0x10000") @@ -187,14 +189,14 @@ void kprobe_arm_test_cases(void) TEST_BF_R ("add pc, pc, r",14,2f-1f-8,"") TEST_BF_R ("add pc, r",14,2f-1f-8,", pc") TEST_BF_R ("mov pc, r",0,2f,"") - TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"") + TEST_BF_R ("add pc, pc, r",14,(2f-1f-8)*2,", asr #1") TEST_BB( "sub pc, pc, #1b-2b+8") #if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7) TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */ #endif TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"") TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc") - TEST_RR( "add pc, pc, r",10,-2,", asl r",11,1,"") + TEST_R( "add pc, pc, r",10,-2,", asl #1") #ifdef CONFIG_THUMB2_KERNEL TEST_ARM_TO_THUMB_INTERWORK_R("add pc, pc, r",0,3f-1f-8+1,"") TEST_ARM_TO_THUMB_INTERWORK_R("sub pc, r",0,3f+8+1,", #8") diff --git a/arch/arm/kernel/probes-arm.c b/arch/arm/kernel/probes-arm.c index 51a13a027989..8eaef81d8344 100644 --- a/arch/arm/kernel/probes-arm.c +++ b/arch/arm/kernel/probes-arm.c @@ -341,12 +341,12 @@ static const union decode_item arm_cccc_000x_table[] = { /* CMP (reg-shift reg) cccc 0001 0101 xxxx xxxx xxxx 0xx1 xxxx */ /* CMN (reg-shift reg) cccc 0001 0111 xxxx xxxx xxxx 0xx1 xxxx */ DECODE_EMULATEX (0x0f900090, 0x01100010, PROBES_DATA_PROCESSING_REG, - REGS(ANY, 0, NOPC, 0, ANY)), + REGS(NOPC, 0, NOPC, 0, NOPC)), /* MOV (reg-shift reg) cccc 0001 101x xxxx xxxx xxxx 0xx1 xxxx */ /* MVN (reg-shift reg) cccc 0001 111x xxxx xxxx xxxx 0xx1 xxxx */ DECODE_EMULATEX (0x0fa00090, 0x01a00010, PROBES_DATA_PROCESSING_REG, - REGS(0, ANY, NOPC, 0, ANY)), + REGS(0, NOPC, NOPC, 0, NOPC)), /* AND (reg-shift reg) cccc 0000 000x xxxx xxxx xxxx 0xx1 xxxx */ /* EOR (reg-shift reg) cccc 0000 001x xxxx xxxx xxxx 0xx1 xxxx */ @@ -359,7 +359,7 @@ static const union decode_item arm_cccc_000x_table[] = { /* ORR (reg-shift reg) cccc 0001 100x xxxx xxxx xxxx 0xx1 xxxx */ /* BIC (reg-shift reg) cccc 0001 110x xxxx xxxx xxxx 0xx1 xxxx */ DECODE_EMULATEX (0x0e000090, 0x00000010, PROBES_DATA_PROCESSING_REG, - REGS(ANY, ANY, NOPC, 0, ANY)), + REGS(NOPC, NOPC, NOPC, 0, NOPC)), DECODE_END }; -- cgit v1.2.3 From 449fd15fbcde239875031d70fd06abb4a0e1ed09 Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Tue, 11 Mar 2014 14:05:26 +0000 Subject: ARM: kprobes: Fix test code compilation errors for ARMv4 targets Conditionally compile kprobes test cases for ARMv5 instructions to avoid compilation errors with ARMv4 targets like: /tmp/cc7Tx8ST.s:16740: Error: selected processor does not support ARM mode `clz r0,r0' Signed-off-by: Jon Medhurst --- arch/arm/kernel/kprobes-test-arm.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index e73f9cff9225..cb1424240ff6 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -218,6 +218,7 @@ void kprobe_arm_test_cases(void) TEST_BB_R("bx r",7,2f,"") TEST_BF_R("bxeq r",14,2f,"") +#if __LINUX_ARM_ARCH__ >= 5 TEST_R("clz r0, r",0, 0x0,"") TEST_R("clzeq r7, r",14,0x1,"") TEST_R("clz lr, r",7, 0xffffffff,"") @@ -339,6 +340,7 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(__inst_arm(0xe16f02e1) " @ smultt pc, r1, r2") TEST_UNSUPPORTED(__inst_arm(0xe16002ef) " @ smultt r0, pc, r2") TEST_UNSUPPORTED(__inst_arm(0xe1600fe1) " @ smultt r0, r1, pc") +#endif TEST_GROUP("Multiply and multiply-accumulate") @@ -561,6 +563,7 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED("ldrsht r1, [r2], #48") #endif +#if __LINUX_ARM_ARCH__ >= 5 TEST_RPR( "strd r",0, VAL1,", [r",1, 48,", -r",2,24,"]") TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]") TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!") @@ -597,6 +600,7 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(__inst_arm(0xe1efc3d0) " @ ldrd r12, [pc, #48]!") TEST_UNSUPPORTED(__inst_arm(0xe0c9f3d0) " @ ldrd pc, [r9], #48") TEST_UNSUPPORTED(__inst_arm(0xe0c9e3d0) " @ ldrd lr, [r9], #48") +#endif TEST_GROUP("Miscellaneous") @@ -1229,7 +1233,9 @@ void kprobe_arm_test_cases(void) TEST_COPROCESSOR( "mrc"two" 0, 0, r0, cr0, cr0, 0") COPROCESSOR_INSTRUCTIONS_ST_LD("",e) +#if __LINUX_ARM_ARCH__ >= 5 COPROCESSOR_INSTRUCTIONS_MC_MR("",e) +#endif TEST_UNSUPPORTED("svc 0") TEST_UNSUPPORTED("svc 0xffffff") @@ -1289,7 +1295,9 @@ void kprobe_arm_test_cases(void) TEST( "blx __dummy_thumb_subroutine_odd") #endif /* __LINUX_ARM_ARCH__ >= 6 */ +#if __LINUX_ARM_ARCH__ >= 5 COPROCESSOR_INSTRUCTIONS_ST_LD("2",f) +#endif #if __LINUX_ARM_ARCH__ >= 6 COPROCESSOR_INSTRUCTIONS_MC_MR("2",f) #endif -- cgit v1.2.3 From c556bcddc78096caeb46dbe3ad0314dd951f1665 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 25 Jun 2014 14:44:19 -0700 Subject: clk: qcom: HDMI source sel is 3 not 2 The HDMI PLL input to the tv mux is supposed to be 3, not 2. Fix the code so that we can properly select the HDMI PLL. Fixes: 6d00b56fe "clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)" Reported-by: Rob Clark Signed-off-by: Stephen Boyd Signed-off-by: Mike Turquette --- drivers/clk/qcom/mmcc-msm8960.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/qcom/mmcc-msm8960.c b/drivers/clk/qcom/mmcc-msm8960.c index 12f3c0b64fcd..4c449b3170f6 100644 --- a/drivers/clk/qcom/mmcc-msm8960.c +++ b/drivers/clk/qcom/mmcc-msm8960.c @@ -1209,7 +1209,7 @@ static struct clk_branch rot_clk = { static u8 mmcc_pxo_hdmi_map[] = { [P_PXO] = 0, - [P_HDMI_PLL] = 2, + [P_HDMI_PLL] = 3, }; static const char *mmcc_pxo_hdmi[] = { -- cgit v1.2.3 From a48e5fafecfb9c0c807d7e7284b5ff884dfb7a3a Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 2 Jul 2014 02:25:15 -0700 Subject: vlan: free percpu stats in device destructor Madalin-Cristian reported crashs happening after a recent commit (5a4ae5f6e7d4 "vlan: unnecessary to check if vlan_pcpu_stats is NULL") ----------------------------------------------------------------------- root@p5040ds:~# vconfig add eth8 1 root@p5040ds:~# vconfig rem eth8.1 Unable to handle kernel paging request for data at address 0x2bc88028 Faulting instruction address: 0xc058e950 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=8 CoreNet Generic Modules linked in: CPU: 3 PID: 2167 Comm: vconfig Tainted: G W 3.16.0-rc3-00346-g65e85bf #2 task: e7264d90 ti: e2c2c000 task.ti: e2c2c000 NIP: c058e950 LR: c058ea30 CTR: c058e900 REGS: e2c2db20 TRAP: 0300 Tainted: G W (3.16.0-rc3-00346-g65e85bf) MSR: 00029002 CR: 48000428 XER: 20000000 DEAR: 2bc88028 ESR: 00000000 GPR00: c047299c e2c2dbd0 e7264d90 00000000 2bc88000 00000000 ffffffff 00000000 GPR08: 0000000f 00000000 000000ff 00000000 28000422 10121928 10100000 10100000 GPR16: 10100000 00000000 c07c5968 00000000 00000000 00000000 e2c2dc48 e7838000 GPR24: c07c5bac c07c58a8 e77290cc c07b0000 00000000 c05de6c0 e7838000 e2c2dc48 NIP [c058e950] vlan_dev_get_stats64+0x50/0x170 LR [c058ea30] vlan_dev_get_stats64+0x130/0x170 Call Trace: [e2c2dbd0] [ffffffea] 0xffffffea (unreliable) [e2c2dc20] [c047299c] dev_get_stats+0x4c/0x140 [e2c2dc40] [c0488ca8] rtnl_fill_ifinfo+0x3d8/0x960 [e2c2dd70] [c0489f4c] rtmsg_ifinfo+0x6c/0x110 [e2c2dd90] [c04731d4] rollback_registered_many+0x344/0x3b0 [e2c2ddd0] [c047332c] rollback_registered+0x2c/0x50 [e2c2ddf0] [c0476058] unregister_netdevice_queue+0x78/0xf0 [e2c2de00] [c058d800] unregister_vlan_dev+0xc0/0x160 [e2c2de20] [c058e360] vlan_ioctl_handler+0x1c0/0x550 [e2c2de90] [c045d11c] sock_ioctl+0x28c/0x2f0 [e2c2deb0] [c010d070] do_vfs_ioctl+0x90/0x7b0 [e2c2df20] [c010d7d0] SyS_ioctl+0x40/0x80 [e2c2df40] [c000f924] ret_from_syscall+0x0/0x3c Fix this problem by freeing percpu stats from dev->destructor() instead of ndo_uninit() Reported-by: Madalin-Cristian Bucur Signed-off-by: Eric Dumazet Tested-by: Madalin-Cristian Bucur Fixes: 5a4ae5f6e7d4 ("vlan: unnecessary to check if vlan_pcpu_stats is NULL") Cc: Li RongQing Signed-off-by: David S. Miller --- net/8021q/vlan_dev.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index ad2ac3c00398..dd11f612e03e 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -627,8 +627,6 @@ static void vlan_dev_uninit(struct net_device *dev) struct vlan_dev_priv *vlan = vlan_dev_priv(dev); int i; - free_percpu(vlan->vlan_pcpu_stats); - vlan->vlan_pcpu_stats = NULL; for (i = 0; i < ARRAY_SIZE(vlan->egress_priority_map); i++) { while ((pm = vlan->egress_priority_map[i]) != NULL) { vlan->egress_priority_map[i] = pm->next; @@ -785,6 +783,15 @@ static const struct net_device_ops vlan_netdev_ops = { .ndo_get_lock_subclass = vlan_dev_get_lock_subclass, }; +static void vlan_dev_free(struct net_device *dev) +{ + struct vlan_dev_priv *vlan = vlan_dev_priv(dev); + + free_percpu(vlan->vlan_pcpu_stats); + vlan->vlan_pcpu_stats = NULL; + free_netdev(dev); +} + void vlan_setup(struct net_device *dev) { ether_setup(dev); @@ -794,7 +801,7 @@ void vlan_setup(struct net_device *dev) dev->tx_queue_len = 0; dev->netdev_ops = &vlan_netdev_ops; - dev->destructor = free_netdev; + dev->destructor = vlan_dev_free; dev->ethtool_ops = &vlan_ethtool_ops; memset(dev->broadcast, 0, ETH_ALEN); -- cgit v1.2.3 From 5925a0555bdaf0b396a84318cbc21ba085f6c0d3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 2 Jul 2014 02:39:38 -0700 Subject: net: fix sparse warning in sk_dst_set() sk_dst_cache has __rcu annotation, so we need a cast to avoid following sparse error : include/net/sock.h:1774:19: warning: incorrect type in initializer (different address spaces) include/net/sock.h:1774:19: expected struct dst_entry [noderef] *__ret include/net/sock.h:1774:19: got struct dst_entry *dst Signed-off-by: Eric Dumazet Reported-by: kbuild test robot Fixes: 7f502361531e ("ipv4: irq safe sk_dst_[re]set() and ipv4_sk_update_pmtu() fix") Signed-off-by: David S. Miller --- include/net/sock.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/sock.h b/include/net/sock.h index c556fd9b05ac..156350745700 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1771,7 +1771,7 @@ sk_dst_set(struct sock *sk, struct dst_entry *dst) struct dst_entry *old_dst; sk_tx_queue_clear(sk); - old_dst = xchg(&sk->sk_dst_cache, dst); + old_dst = xchg((__force struct dst_entry **)&sk->sk_dst_cache, dst); dst_release(old_dst); } -- cgit v1.2.3 From 5924f17a8a30c2ae18d034a86ee7581b34accef6 Mon Sep 17 00:00:00 2001 From: Christoph Paasch Date: Sat, 28 Jun 2014 18:26:37 +0200 Subject: tcp: Fix divide by zero when pushing during tcp-repair When in repair-mode and TCP_RECV_QUEUE is set, we end up calling tcp_push with mss_now being 0. If data is in the send-queue and tcp_set_skb_tso_segs gets called, we crash because it will divide by mss_now: [ 347.151939] divide error: 0000 [#1] SMP [ 347.152907] Modules linked in: [ 347.152907] CPU: 1 PID: 1123 Comm: packetdrill Not tainted 3.16.0-rc2 #4 [ 347.152907] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 347.152907] task: f5b88540 ti: f3c82000 task.ti: f3c82000 [ 347.152907] EIP: 0060:[] EFLAGS: 00210246 CPU: 1 [ 347.152907] EIP is at tcp_set_skb_tso_segs+0x49/0xa0 [ 347.152907] EAX: 00000b67 EBX: f5acd080 ECX: 00000000 EDX: 00000000 [ 347.152907] ESI: f5a28f40 EDI: f3c88f00 EBP: f3c83d10 ESP: f3c83d00 [ 347.152907] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 347.152907] CR0: 80050033 CR2: 083158b0 CR3: 35146000 CR4: 000006b0 [ 347.152907] Stack: [ 347.152907] c167f9d9 f5acd080 000005b4 00000002 f3c83d20 c16013e6 f3c88f00 f5acd080 [ 347.152907] f3c83da0 c1603b5a f3c83d38 c10a0188 00000000 00000000 f3c83d84 c10acc85 [ 347.152907] c1ad5ec0 00000000 00000000 c1ad679c 010003e0 00000000 00000000 f3c88fc8 [ 347.152907] Call Trace: [ 347.152907] [] ? apic_timer_interrupt+0x2d/0x34 [ 347.152907] [] tcp_init_tso_segs+0x36/0x50 [ 347.152907] [] tcp_write_xmit+0x7a/0xbf0 [ 347.152907] [] ? up+0x28/0x40 [ 347.152907] [] ? console_unlock+0x295/0x480 [ 347.152907] [] ? vprintk_emit+0x1ef/0x4b0 [ 347.152907] [] __tcp_push_pending_frames+0x36/0xd0 [ 347.152907] [] tcp_push+0xf0/0x120 [ 347.152907] [] tcp_sendmsg+0xf1/0xbf0 [ 347.152907] [] ? kmem_cache_free+0xf0/0x120 [ 347.152907] [] ? __sigqueue_free+0x32/0x40 [ 347.152907] [] ? __sigqueue_free+0x32/0x40 [ 347.152907] [] ? do_wp_page+0x3e0/0x850 [ 347.152907] [] inet_sendmsg+0x4a/0xb0 [ 347.152907] [] ? handle_mm_fault+0x709/0xfb0 [ 347.152907] [] sock_aio_write+0xbb/0xd0 [ 347.152907] [] do_sync_write+0x69/0xa0 [ 347.152907] [] vfs_write+0x123/0x160 [ 347.152907] [] SyS_write+0x55/0xb0 [ 347.152907] [] sysenter_do_call+0x12/0x28 This can easily be reproduced with the following packetdrill-script (the "magic" with netem, sk_pacing and limit_output_bytes is done to prevent the kernel from pushing all segments, because hitting the limit without doing this is not so easy with packetdrill): 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 +0 > S. 0:0(0) ack 1 +0.1 < . 1:1(0) ack 1 win 65000 +0 accept(3, ..., ...) = 4 // This forces that not all segments of the snd-queue will be pushed +0 `tc qdisc add dev tun0 root netem delay 10ms` +0 `sysctl -w net.ipv4.tcp_limit_output_bytes=2` +0 setsockopt(4, SOL_SOCKET, 47, [2], 4) = 0 +0 write(4,...,10000) = 10000 +0 write(4,...,10000) = 10000 // Set tcp-repair stuff, particularly TCP_RECV_QUEUE +0 setsockopt(4, SOL_TCP, 19, [1], 4) = 0 +0 setsockopt(4, SOL_TCP, 20, [1], 4) = 0 // This now will make the write push the remaining segments +0 setsockopt(4, SOL_SOCKET, 47, [20000], 4) = 0 +0 `sysctl -w net.ipv4.tcp_limit_output_bytes=130000` // Now we will crash +0 write(4,...,1000) = 1000 This happens since ec3423257508 (tcp: fix retransmission in repair mode). Prior to that, the call to tcp_push was prevented by a check for tp->repair. The patch fixes it, by adding the new goto-label out_nopush. When exiting tcp_sendmsg and a push is not required, which is the case for tp->repair, we go to this label. When repairing and calling send() with TCP_RECV_QUEUE, the data is actually put in the receive-queue. So, no push is required because no data has been added to the send-queue. Cc: Andrew Vagin Cc: Pavel Emelyanov Fixes: ec3423257508 (tcp: fix retransmission in repair mode) Signed-off-by: Christoph Paasch Acked-by: Andrew Vagin Acked-by: Pavel Emelyanov Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index eb1dde37e678..9d2118e5fbc7 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1108,7 +1108,7 @@ int tcp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, if (unlikely(tp->repair)) { if (tp->repair_queue == TCP_RECV_QUEUE) { copied = tcp_send_rcvq(sk, msg, size); - goto out; + goto out_nopush; } err = -EINVAL; @@ -1282,6 +1282,7 @@ wait_for_memory: out: if (copied) tcp_push(sk, flags, mss_now, tp->nonagle, size_goal); +out_nopush: release_sock(sk); return copied + copied_syn; -- cgit v1.2.3 From f46d53d0e9151ea9553361d2bf044ba555350e5f Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Sun, 29 Jun 2014 01:45:53 +0100 Subject: defxx: Remove an incorrectly inverted preprocessor conditional The RX handler of the driver has two paths switched between, depending on the size of the frame received, as determined by SKBUFF_RX_COPYBREAK. When a small frame is received, a new skb allocated has data space large enough to hold the incoming frame only, and data is copied there from the original skb whose buffer is returned to the DMA RX ring; in that case `rx_in_place' is 0. When a large frame is received, a new skb allocated has data space large enough to hold the largest frame possible, including the overhead for alignment, the receive status and padding, over 4.5kiB overall, and its buffer is placed on the DMA RX ring while the original buffer is passed up to the network stack avoiding the need to copy data; in that case `rx_in_place' is 1. However the latter scenario is only possible when dynamic buffers are used, as determined by DYNAMIC_BUFFERS, because otherwise the buffers used for the DMA RX ring are fixed at the time the interface is brought up. That leads to an observation that the preprocessor conditional around the `rx_in_place' check is inverted, the check only really matters when dynamic buffers are in use. It has gone unnoticed for many years since support for using dynamic buffers on the DMA RX ring was introduced in 2.1.40 -- because the only problem that results is in the case where `rx_in_place' is 1 frame data received is unnecessarily copied to the newly-allocated buffer, before the buffer placed on the the DMA receive RX and its contents ignored. Therefore the only symptom is some performance loss. Rather than flipping the condition though I decided to discard the conditional altogether -- in the case of static buffers `rx_in_place' is always 0 so GCC will optimise the C conditional away instead. Tested on a few DEFPA and DEFTA boards successfully using both small and large frames, both with DYNAMIC_BUFFERS defined and with the macro undefined. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller --- drivers/net/fddi/defxx.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c index eb78203cd58e..052927be074b 100644 --- a/drivers/net/fddi/defxx.c +++ b/drivers/net/fddi/defxx.c @@ -3074,10 +3074,7 @@ static void dfx_rcv_queue_process( break; } else { -#ifndef DYNAMIC_BUFFERS - if (! rx_in_place) -#endif - { + if (!rx_in_place) { /* Receive buffer allocated, pass receive packet up */ skb_copy_to_linear_data(skb, -- cgit v1.2.3 From 1b037474d0c0b5ceb65bc809e3d8ac4497ee041b Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Sun, 29 Jun 2014 02:09:19 +0100 Subject: defxx: Fix !DYNAMIC_BUFFERS compilation warnings This fixes compilation warnings: drivers/net/fddi/defxx.c:294: warning: 'dfx_rcv_flush' declared inline after being called drivers/net/fddi/defxx.c:294: warning: previous declaration of 'dfx_rcv_flush' was here drivers/net/fddi/defxx.c:2854: warning: 'my_skb_align' defined but not used triggered when the driver is built with DYNAMIC_BUFFERS undefined. Code tested to work just fine with these changes and a few DEFPA and DEFTA boards. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller --- drivers/net/fddi/defxx.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c index 052927be074b..2aa57270838f 100644 --- a/drivers/net/fddi/defxx.c +++ b/drivers/net/fddi/defxx.c @@ -291,7 +291,11 @@ static int dfx_hw_dma_uninit(DFX_board_t *bp, PI_UINT32 type); static int dfx_rcv_init(DFX_board_t *bp, int get_buffers); static void dfx_rcv_queue_process(DFX_board_t *bp); +#ifdef DYNAMIC_BUFFERS static void dfx_rcv_flush(DFX_board_t *bp); +#else +static inline void dfx_rcv_flush(DFX_board_t *bp) {} +#endif static netdev_tx_t dfx_xmt_queue_pkt(struct sk_buff *skb, struct net_device *dev); @@ -2849,7 +2853,7 @@ static int dfx_hw_dma_uninit(DFX_board_t *bp, PI_UINT32 type) * Align an sk_buff to a boundary power of 2 * */ - +#ifdef DYNAMIC_BUFFERS static void my_skb_align(struct sk_buff *skb, int n) { unsigned long x = (unsigned long)skb->data; @@ -2859,7 +2863,7 @@ static void my_skb_align(struct sk_buff *skb, int n) skb_reserve(skb, v - x); } - +#endif /* * ================ @@ -3450,10 +3454,6 @@ static void dfx_rcv_flush( DFX_board_t *bp ) } } -#else -static inline void dfx_rcv_flush( DFX_board_t *bp ) -{ -} #endif /* DYNAMIC_BUFFERS */ /* -- cgit v1.2.3 From 35f6f45368632f21bd27559c44dbb1cab51d8947 Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Sun, 29 Jun 2014 11:54:55 +0300 Subject: net/mlx4_en: Don't use irq_affinity_notifier to track changes in IRQ affinity map IRQ affinity notifier can only have a single notifier - cpu_rmap notifier. Can't use it to track changes in IRQ affinity map. Detect IRQ affinity changes by comparing CPU to current IRQ affinity map during NAPI poll thread. CC: Thomas Gleixner CC: Ben Hutchings Fixes: 2eacc23 ("net/mlx4_core: Enforce irq affinity changes immediatly") Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/cq.c | 2 - drivers/net/ethernet/mellanox/mlx4/en_cq.c | 4 ++ drivers/net/ethernet/mellanox/mlx4/en_rx.c | 16 +++++-- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 6 --- drivers/net/ethernet/mellanox/mlx4/eq.c | 69 ++++------------------------ drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 + include/linux/mlx4/device.h | 4 +- 7 files changed, 28 insertions(+), 74 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/cq.c b/drivers/net/ethernet/mellanox/mlx4/cq.c index 80f725228f5b..56022d647837 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cq.c +++ b/drivers/net/ethernet/mellanox/mlx4/cq.c @@ -294,8 +294,6 @@ int mlx4_cq_alloc(struct mlx4_dev *dev, int nent, init_completion(&cq->free); cq->irq = priv->eq_table.eq[cq->vector].irq; - cq->irq_affinity_change = false; - return 0; err_radix: diff --git a/drivers/net/ethernet/mellanox/mlx4/en_cq.c b/drivers/net/ethernet/mellanox/mlx4/en_cq.c index 4b2130760eed..1213cc71348c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_cq.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_cq.c @@ -128,6 +128,10 @@ int mlx4_en_activate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq, mlx4_warn(mdev, "Failed assigning an EQ to %s, falling back to legacy EQ's\n", name); } + + cq->irq_desc = + irq_to_desc(mlx4_eq_get_irq(mdev->dev, + cq->vector)); } } else { cq->vector = (cq->ring + 1 + priv->port) % diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index d2d415732d99..96724170308a 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -40,6 +40,7 @@ #include #include #include +#include #include "mlx4_en.h" @@ -896,16 +897,25 @@ int mlx4_en_poll_rx_cq(struct napi_struct *napi, int budget) /* If we used up all the quota - we're probably not done yet... */ if (done == budget) { + int cpu_curr; + const struct cpumask *aff; + INC_PERF_COUNTER(priv->pstats.napi_quota); - if (unlikely(cq->mcq.irq_affinity_change)) { - cq->mcq.irq_affinity_change = false; + + cpu_curr = smp_processor_id(); + aff = irq_desc_get_irq_data(cq->irq_desc)->affinity; + + if (unlikely(!cpumask_test_cpu(cpu_curr, aff))) { + /* Current cpu is not according to smp_irq_affinity - + * probably affinity changed. need to stop this NAPI + * poll, and restart it on the right CPU + */ napi_complete(napi); mlx4_en_arm_cq(priv, cq); return 0; } } else { /* Done for now */ - cq->mcq.irq_affinity_change = false; napi_complete(napi); mlx4_en_arm_cq(priv, cq); } diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 8be7483f8236..ac3dead3792c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -474,15 +474,9 @@ int mlx4_en_poll_tx_cq(struct napi_struct *napi, int budget) /* If we used up all the quota - we're probably not done yet... */ if (done < budget) { /* Done for now */ - cq->mcq.irq_affinity_change = false; napi_complete(napi); mlx4_en_arm_cq(priv, cq); return done; - } else if (unlikely(cq->mcq.irq_affinity_change)) { - cq->mcq.irq_affinity_change = false; - napi_complete(napi); - mlx4_en_arm_cq(priv, cq); - return 0; } return budget; } diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c index d954ec1eac17..2a004b347e1d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/eq.c +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c @@ -53,11 +53,6 @@ enum { MLX4_EQ_ENTRY_SIZE = 0x20 }; -struct mlx4_irq_notify { - void *arg; - struct irq_affinity_notify notify; -}; - #define MLX4_EQ_STATUS_OK ( 0 << 28) #define MLX4_EQ_STATUS_WRITE_FAIL (10 << 28) #define MLX4_EQ_OWNER_SW ( 0 << 24) @@ -1088,57 +1083,6 @@ static void mlx4_unmap_clr_int(struct mlx4_dev *dev) iounmap(priv->clr_base); } -static void mlx4_irq_notifier_notify(struct irq_affinity_notify *notify, - const cpumask_t *mask) -{ - struct mlx4_irq_notify *n = container_of(notify, - struct mlx4_irq_notify, - notify); - struct mlx4_priv *priv = (struct mlx4_priv *)n->arg; - struct radix_tree_iter iter; - void **slot; - - radix_tree_for_each_slot(slot, &priv->cq_table.tree, &iter, 0) { - struct mlx4_cq *cq = (struct mlx4_cq *)(*slot); - - if (cq->irq == notify->irq) - cq->irq_affinity_change = true; - } -} - -static void mlx4_release_irq_notifier(struct kref *ref) -{ - struct mlx4_irq_notify *n = container_of(ref, struct mlx4_irq_notify, - notify.kref); - kfree(n); -} - -static void mlx4_assign_irq_notifier(struct mlx4_priv *priv, - struct mlx4_dev *dev, int irq) -{ - struct mlx4_irq_notify *irq_notifier = NULL; - int err = 0; - - irq_notifier = kzalloc(sizeof(*irq_notifier), GFP_KERNEL); - if (!irq_notifier) { - mlx4_warn(dev, "Failed to allocate irq notifier. irq %d\n", - irq); - return; - } - - irq_notifier->notify.irq = irq; - irq_notifier->notify.notify = mlx4_irq_notifier_notify; - irq_notifier->notify.release = mlx4_release_irq_notifier; - irq_notifier->arg = priv; - err = irq_set_affinity_notifier(irq, &irq_notifier->notify); - if (err) { - kfree(irq_notifier); - irq_notifier = NULL; - mlx4_warn(dev, "Failed to set irq notifier. irq %d\n", irq); - } -} - - int mlx4_alloc_eq_table(struct mlx4_dev *dev) { struct mlx4_priv *priv = mlx4_priv(dev); @@ -1409,8 +1353,6 @@ int mlx4_assign_eq(struct mlx4_dev *dev, char *name, struct cpu_rmap *rmap, continue; /*we dont want to break here*/ } - mlx4_assign_irq_notifier(priv, dev, - priv->eq_table.eq[vec].irq); eq_set_ci(&priv->eq_table.eq[vec], 1); } @@ -1427,6 +1369,14 @@ int mlx4_assign_eq(struct mlx4_dev *dev, char *name, struct cpu_rmap *rmap, } EXPORT_SYMBOL(mlx4_assign_eq); +int mlx4_eq_get_irq(struct mlx4_dev *dev, int vec) +{ + struct mlx4_priv *priv = mlx4_priv(dev); + + return priv->eq_table.eq[vec].irq; +} +EXPORT_SYMBOL(mlx4_eq_get_irq); + void mlx4_release_eq(struct mlx4_dev *dev, int vec) { struct mlx4_priv *priv = mlx4_priv(dev); @@ -1438,9 +1388,6 @@ void mlx4_release_eq(struct mlx4_dev *dev, int vec) Belonging to a legacy EQ*/ mutex_lock(&priv->msix_ctl.pool_lock); if (priv->msix_ctl.pool_bm & 1ULL << i) { - irq_set_affinity_notifier( - priv->eq_table.eq[vec].irq, - NULL); free_irq(priv->eq_table.eq[vec].irq, &priv->eq_table.eq[vec]); priv->msix_ctl.pool_bm &= ~(1ULL << i); diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 0e15295bedd6..624e1939e9ee 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -343,6 +343,7 @@ struct mlx4_en_cq { #define CQ_USER_PEND (MLX4_EN_CQ_STATE_POLL | MLX4_EN_CQ_STATE_POLL_YIELD) spinlock_t poll_lock; /* protects from LLS/napi conflicts */ #endif /* CONFIG_NET_RX_BUSY_POLL */ + struct irq_desc *irq_desc; }; struct mlx4_en_port_profile { diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index b12f4bbd064c..35b51e7af886 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -578,8 +578,6 @@ struct mlx4_cq { u32 cons_index; u16 irq; - bool irq_affinity_change; - __be32 *set_ci_db; __be32 *arm_db; int arm_sn; @@ -1167,6 +1165,8 @@ int mlx4_assign_eq(struct mlx4_dev *dev, char *name, struct cpu_rmap *rmap, int *vector); void mlx4_release_eq(struct mlx4_dev *dev, int vec); +int mlx4_eq_get_irq(struct mlx4_dev *dev, int vec); + int mlx4_get_phys_port_id(struct mlx4_dev *dev); int mlx4_wol_read(struct mlx4_dev *dev, u64 *config, int port); int mlx4_wol_write(struct mlx4_dev *dev, u64 config, int port); -- cgit v1.2.3 From 143b5ba21b2bd5091cd8dcd92de7ba1ed1d1c83c Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Sun, 29 Jun 2014 11:54:56 +0300 Subject: lib/cpumask: cpumask_set_cpu_local_first to use all cores when numa node is not defined When device is non numa aware (numa_node == -1), use all online cpu's. Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- lib/cpumask.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/cpumask.c b/lib/cpumask.c index c101230658eb..b6513a9f2892 100644 --- a/lib/cpumask.c +++ b/lib/cpumask.c @@ -191,7 +191,7 @@ int cpumask_set_cpu_local_first(int i, int numa_node, cpumask_t *dstp) i %= num_online_cpus(); - if (!cpumask_of_node(numa_node)) { + if (numa_node == -1 || !cpumask_of_node(numa_node)) { /* Use all online cpu's for non numa aware system */ cpumask_copy(mask, cpu_online_mask); } else { -- cgit v1.2.3 From bb273617a65b9ed75f8cf9417206cbfcfb41fc48 Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Sun, 29 Jun 2014 11:54:57 +0300 Subject: net/mlx4_en: IRQ affinity hint is not cleared on port down Need to remove affinity hint at mlx4_en_deactivate_cq() and not at mlx4_en_destroy_cq() - since affinity_mask might be free'd while still being used by procfs. Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_cq.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_cq.c b/drivers/net/ethernet/mellanox/mlx4/en_cq.c index 1213cc71348c..14c00048bbec 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_cq.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_cq.c @@ -191,8 +191,6 @@ void mlx4_en_destroy_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq **pcq) mlx4_en_unmap_buffer(&cq->wqres.buf); mlx4_free_hwq_res(mdev->dev, &cq->wqres, cq->buf_size); if (priv->mdev->dev->caps.comp_pool && cq->vector) { - if (!cq->is_tx) - irq_set_affinity_hint(cq->mcq.irq, NULL); mlx4_release_eq(priv->mdev->dev, cq->vector); } cq->vector = 0; @@ -208,6 +206,7 @@ void mlx4_en_deactivate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq) if (!cq->is_tx) { napi_hash_del(&cq->napi); synchronize_rcu(); + irq_set_affinity_hint(cq->mcq.irq, NULL); } netif_napi_del(&cq->napi); -- cgit v1.2.3 From 48bc03433cfdcac7a3bbb233d5c9f95297a0f5ab Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Sun, 29 Jun 2014 13:10:18 +0200 Subject: ieee802154: reassembly: fix possible buffer overflow The max_dsize attribute in ctl_table for lowpan_frags_ns_ctl_table is configured with integer accessing methods. This patch change the max_dsize attribute to int to avoid a possible buffer overflow. Signed-off-by: Alexander Aring Signed-off-by: David S. Miller --- include/net/netns/ieee802154_6lowpan.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/netns/ieee802154_6lowpan.h b/include/net/netns/ieee802154_6lowpan.h index 079030c853d8..e2070960bac0 100644 --- a/include/net/netns/ieee802154_6lowpan.h +++ b/include/net/netns/ieee802154_6lowpan.h @@ -16,7 +16,7 @@ struct netns_sysctl_lowpan { struct netns_ieee802154_lowpan { struct netns_sysctl_lowpan sysctl; struct netns_frags frags; - u16 max_dsize; + int max_dsize; }; #endif -- cgit v1.2.3 From 0acf16768740776feffac506ce93b1c06c059ac6 Mon Sep 17 00:00:00 2001 From: Vince Bridgers Date: Sun, 29 Jun 2014 20:34:51 -0500 Subject: net: stmmac: add platform init/exit for Altera's ARM socfpga This patch adds platform init/exit functions and modifications to support suspend/resume for the Altera Cyclone 5 SOC Ethernet controller. The platform exit function puts the controller into reset using the socfpga reset controller driver. The platform init function sets up the Synopsys mac by first making sure the Ethernet controller is held in reset, programming the phy mode through external support logic, then deasserts reset through the socfpga reset manager driver. Signed-off-by: Vince Bridgers Signed-off-by: David S. Miller --- .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 69 ++++++++++++++++++++++ drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 ++ 2 files changed, 73 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c index fd8a217556a1..ec632e666c56 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c @@ -20,7 +20,9 @@ #include #include #include +#include #include +#include "stmmac.h" #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0 #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1 @@ -34,6 +36,7 @@ struct socfpga_dwmac { u32 reg_shift; struct device *dev; struct regmap *sys_mgr_base_addr; + struct reset_control *stmmac_rst; }; static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev) @@ -43,6 +46,13 @@ static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device * u32 reg_offset, reg_shift; int ret; + dwmac->stmmac_rst = devm_reset_control_get(dev, + STMMAC_RESOURCE_NAME); + if (IS_ERR(dwmac->stmmac_rst)) { + dev_info(dev, "Could not get reset control!\n"); + return -EINVAL; + } + dwmac->interface = of_get_phy_mode(np); sys_mgr_base_addr = syscon_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon"); @@ -125,6 +135,65 @@ static void *socfpga_dwmac_probe(struct platform_device *pdev) return dwmac; } +static void socfpga_dwmac_exit(struct platform_device *pdev, void *priv) +{ + struct socfpga_dwmac *dwmac = priv; + + /* On socfpga platform exit, assert and hold reset to the + * enet controller - the default state after a hard reset. + */ + if (dwmac->stmmac_rst) + reset_control_assert(dwmac->stmmac_rst); +} + +static int socfpga_dwmac_init(struct platform_device *pdev, void *priv) +{ + struct socfpga_dwmac *dwmac = priv; + struct net_device *ndev = platform_get_drvdata(pdev); + struct stmmac_priv *stpriv = NULL; + int ret = 0; + + if (ndev) + stpriv = netdev_priv(ndev); + + /* Assert reset to the enet controller before changing the phy mode */ + if (dwmac->stmmac_rst) + reset_control_assert(dwmac->stmmac_rst); + + /* Setup the phy mode in the system manager registers according to + * devicetree configuration + */ + ret = socfpga_dwmac_setup(dwmac); + + /* Deassert reset for the phy configuration to be sampled by + * the enet controller, and operation to start in requested mode + */ + if (dwmac->stmmac_rst) + reset_control_deassert(dwmac->stmmac_rst); + + /* Before the enet controller is suspended, the phy is suspended. + * This causes the phy clock to be gated. The enet controller is + * resumed before the phy, so the clock is still gated "off" when + * the enet controller is resumed. This code makes sure the phy + * is "resumed" before reinitializing the enet controller since + * the enet controller depends on an active phy clock to complete + * a DMA reset. A DMA reset will "time out" if executed + * with no phy clock input on the Synopsys enet controller. + * Verified through Synopsys Case #8000711656. + * + * Note that the phy clock is also gated when the phy is isolated. + * Phy "suspend" and "isolate" controls are located in phy basic + * control register 0, and can be modified by the phy driver + * framework. + */ + if (stpriv && stpriv->phydev) + phy_resume(stpriv->phydev); + + return ret; +} + const struct stmmac_of_data socfpga_gmac_data = { .setup = socfpga_dwmac_probe, + .init = socfpga_dwmac_init, + .exit = socfpga_dwmac_exit, }; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 057a1208e594..18315f34938b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2878,6 +2878,10 @@ int stmmac_suspend(struct net_device *ndev) clk_disable_unprepare(priv->stmmac_clk); } spin_unlock_irqrestore(&priv->lock, flags); + + priv->oldlink = 0; + priv->speed = 0; + priv->oldduplex = -1; return 0; } -- cgit v1.2.3 From 43d24e48940d04f587818fadc5305b109f5cb8cf Mon Sep 17 00:00:00 2001 From: Vince Bridgers Date: Sun, 29 Jun 2014 20:34:52 -0500 Subject: net: stmmac: Correct duplicate if/then/else case found by cppcheck Cppcheck found a duplicate if/then/else case where a receive descriptor was being processed. This patch corrects that issue. cppcheck --force --enable=all --inline-suppr . ... Checking enh_desc.c... [enh_desc.c:148] -> [enh_desc.c:144]: (style) Found duplicate if expressions. ... Signed-off-by: Vince Bridgers Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c index 7e6628a91514..1e2bcf5f89e1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c +++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c @@ -145,7 +145,7 @@ static void enh_desc_get_ext_status(void *data, struct stmmac_extra_stats *x, x->rx_msg_type_delay_req++; else if (p->des4.erx.msg_type == RDES_EXT_DELAY_RESP) x->rx_msg_type_delay_resp++; - else if (p->des4.erx.msg_type == RDES_EXT_DELAY_REQ) + else if (p->des4.erx.msg_type == RDES_EXT_PDELAY_REQ) x->rx_msg_type_pdelay_req++; else if (p->des4.erx.msg_type == RDES_EXT_PDELAY_RESP) x->rx_msg_type_pdelay_resp++; -- cgit v1.2.3 From c8df8ce3ee5ff24993bba9033e7d13b16fa3809c Mon Sep 17 00:00:00 2001 From: Vince Bridgers Date: Sun, 29 Jun 2014 20:34:53 -0500 Subject: net: stmmac: Remove unneeded I/O read caught by cppcheck Cppcheck found a case where a local variable was being assigned a value, but not used. There seems to be no reason to read this register before assigning a new value, so addressing thie issue. cppcheck --force --enable=all --inline-suppr . shows ... Variable 'value' is reassigned a value before the old one has been used. Signed-off-by: Vince Bridgers Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c index b3e148ef5683..9d3748361a1e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c @@ -320,11 +320,8 @@ static void dwmac1000_set_eee_timer(void __iomem *ioaddr, int ls, int tw) static void dwmac1000_ctrl_ane(void __iomem *ioaddr, bool restart) { - u32 value; - - value = readl(ioaddr + GMAC_AN_CTRL); /* auto negotiation enable and External Loopback enable */ - value = GMAC_AN_CTRL_ANE | GMAC_AN_CTRL_ELE; + u32 value = GMAC_AN_CTRL_ANE | GMAC_AN_CTRL_ELE; if (restart) value |= GMAC_AN_CTRL_RAN; -- cgit v1.2.3 From 1b6478231c6f5f844185acb32045cf195028cfce Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 2 Jul 2014 17:25:23 +0100 Subject: xen/manage: fix potential deadlock when resuming the console Calling xen_console_resume() in xen_suspend() causes a warning because it locks irq_mapping_update_lock (a mutex) and this may sleep. If a userspace process is using the evtchn device then this mutex may be locked at the point of the stop_machine() call and xen_console_resume() would then deadlock. Resuming the console after stop_machine() returns avoids this deadlock. Signed-off-by: David Vrabel Reviewed-by: Boris Ostrovsky Cc: --- drivers/xen/manage.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index c3667b202f2f..5f1e1f3cd186 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -88,7 +88,6 @@ static int xen_suspend(void *data) if (!si->cancelled) { xen_irq_resume(); - xen_console_resume(); xen_timer_resume(); } @@ -135,6 +134,10 @@ static void do_suspend(void) err = stop_machine(xen_suspend, &si, cpumask_of(0)); + /* Resume console as early as possible. */ + if (!si.cancelled) + xen_console_resume(); + raw_notifier_call_chain(&xen_resume_notifier, 0, NULL); dpm_resume_start(si.cancelled ? PMSG_THAW : PMSG_RESTORE); -- cgit v1.2.3 From 43d826ca5979927131685cc2092c7ce862cb91cd Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 25 Jun 2014 09:12:30 +0300 Subject: iwlwifi: dvm: don't enable CTS to self We should always prefer to use full RTS protection. Using CTS to self gives a meaningless improvement, but this flow is much harder for the firmware which is likely to have issues with it. CC: Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/dvm/rxon.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c index ed50de6362ed..6dc5dd3ced44 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rxon.c +++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c @@ -1068,13 +1068,6 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) /* recalculate basic rates */ iwl_calc_basic_rates(priv, ctx); - /* - * force CTS-to-self frames protection if RTS-CTS is not preferred - * one aggregation protection method - */ - if (!priv->hw_params.use_rts_for_aggregation) - ctx->staging.flags |= RXON_FLG_SELF_CTS_EN; - if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) || !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK)) ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; @@ -1480,11 +1473,6 @@ void iwlagn_bss_info_changed(struct ieee80211_hw *hw, else ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK; - if (bss_conf->use_cts_prot) - ctx->staging.flags |= RXON_FLG_SELF_CTS_EN; - else - ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN; - memcpy(ctx->staging.bssid_addr, bss_conf->bssid, ETH_ALEN); if (vif->type == NL80211_IFTYPE_AP || -- cgit v1.2.3 From df86754b746e9a0ff6f863f690b1c01d408e3cdc Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 2 Jul 2014 07:44:44 +0800 Subject: hwmon: (amc6821) Fix permissions for temp2_input temp2_input should not be writable, fix it. Reported-by: Guenter Roeck Signed-off-by: Axel Lin Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck --- drivers/hwmon/amc6821.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c index eea817296513..9f2be3dd28f3 100644 --- a/drivers/hwmon/amc6821.c +++ b/drivers/hwmon/amc6821.c @@ -704,7 +704,7 @@ static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, get_temp_alarm, NULL, IDX_TEMP1_MAX); static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, get_temp_alarm, NULL, IDX_TEMP1_CRIT); -static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO | S_IWUSR, +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, get_temp, NULL, IDX_TEMP2_INPUT); static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR, get_temp, set_temp, IDX_TEMP2_MIN); -- cgit v1.2.3 From 1035a9e3e9c76b64a860a774f5b867d28d34acc2 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 2 Jul 2014 08:29:55 +0800 Subject: hwmon: (adm1029) Ensure the fan_div cache is updated in set_fan_div Writing to fanX_div does not clear the cache. As a result, reading from fanX_div may return the old value for up to two seconds after writing a new value. This patch ensures the fan_div cache is updated in set_fan_div(). Reported-by: Guenter Roeck Signed-off-by: Axel Lin Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck --- drivers/hwmon/adm1029.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c index 78339e880bd6..2804571b269e 100644 --- a/drivers/hwmon/adm1029.c +++ b/drivers/hwmon/adm1029.c @@ -232,6 +232,9 @@ static ssize_t set_fan_div(struct device *dev, /* Update the value */ reg = (reg & 0x3F) | (val << 6); + /* Update the cache */ + data->fan_div[attr->index] = reg; + /* Write value */ i2c_smbus_write_byte_data(client, ADM1029_REG_FAN_DIV[attr->index], reg); -- cgit v1.2.3 From c024044d4da2c9c3b32933b4235df1e409293b84 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 3 Jul 2014 22:45:45 +0800 Subject: hwmon: (adm1021) Fix cache problem when writing temperature limits The module test script for the adm1021 driver exposes a cache problem when writing temperature limits. temp_min and temp_max are expected to be stored in milli-degrees C but are stored in degrees C. Reported-by: Guenter Roeck Signed-off-by: Axel Lin Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck --- drivers/hwmon/adm1021.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index 3eb4281689b5..d74241bb278c 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -185,7 +185,7 @@ static ssize_t set_temp_max(struct device *dev, struct adm1021_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; long temp; - int err; + int reg_val, err; err = kstrtol(buf, 10, &temp); if (err) @@ -193,10 +193,11 @@ static ssize_t set_temp_max(struct device *dev, temp /= 1000; mutex_lock(&data->update_lock); - data->temp_max[index] = clamp_val(temp, -128, 127); + reg_val = clamp_val(temp, -128, 127); + data->temp_max[index] = reg_val * 1000; if (!read_only) i2c_smbus_write_byte_data(client, ADM1021_REG_TOS_W(index), - data->temp_max[index]); + reg_val); mutex_unlock(&data->update_lock); return count; @@ -210,7 +211,7 @@ static ssize_t set_temp_min(struct device *dev, struct adm1021_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; long temp; - int err; + int reg_val, err; err = kstrtol(buf, 10, &temp); if (err) @@ -218,10 +219,11 @@ static ssize_t set_temp_min(struct device *dev, temp /= 1000; mutex_lock(&data->update_lock); - data->temp_min[index] = clamp_val(temp, -128, 127); + reg_val = clamp_val(temp, -128, 127); + data->temp_min[index] = reg_val * 1000; if (!read_only) i2c_smbus_write_byte_data(client, ADM1021_REG_THYST_W(index), - data->temp_min[index]); + reg_val); mutex_unlock(&data->update_lock); return count; -- cgit v1.2.3 From dc271ee0d04d12d6bfabacbec803289a7072fbd9 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 3 Jul 2014 20:46:35 +0300 Subject: iwlwifi: mvm: disable CTS to Self Firmware folks seem say that this flag can make trouble. Drop it. The advantage of CTS to self is that it slightly reduces the cost of the protection, but make the protection less reliable. Cc: [3.13+] Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c index 8b5302777632..725ba49576bf 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c @@ -667,10 +667,9 @@ static void iwl_mvm_mac_ctxt_cmd_common(struct iwl_mvm *mvm, if (vif->bss_conf.qos) cmd->qos_flags |= cpu_to_le32(MAC_QOS_FLG_UPDATE_EDCA); - if (vif->bss_conf.use_cts_prot) { + if (vif->bss_conf.use_cts_prot) cmd->protection_flags |= cpu_to_le32(MAC_PROT_FLG_TGG_PROTECT); - cmd->protection_flags |= cpu_to_le32(MAC_PROT_FLG_SELF_CTS_EN); - } + IWL_DEBUG_RATE(mvm, "use_cts_prot %d, ht_operation_mode %d\n", vif->bss_conf.use_cts_prot, vif->bss_conf.ht_operation_mode); -- cgit v1.2.3 From dd94324b983afe114ba9e7ee3649313b451f63ce Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Tue, 27 May 2014 14:25:43 +0530 Subject: ARM: dts: dra7xx-clocks: Fix the l3 and l4 clock rates Without the patch: /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck # cat clk_rate 532000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div # cat clk_rate 532000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div/l4_root_clk_div # cat clk_rate 532000000 With the patch: /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck # cat clk_rate 532000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div # cat clk_rate 266000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div/l4_root_clk_div # cat clk_rate 133000000 The l3 clock derived from core DPLL is actually a divider clock, with the default divider set to 2. l4 then derived from l3 is a fixed factor clock, but the fixed divider is 2 and not 1. Which means the l3 clock is half of core DPLLs h12x2 and l4 is half of l3 (as seen with this patch) Signed-off-by: Rajendra Nayak Signed-off-by: Tero Kristo --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index b03cfe49d22b..d126d5763422 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -673,10 +673,12 @@ l3_iclk_div: l3_iclk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <4>; + reg = <0x0100>; clocks = <&dpll_core_h12x2_ck>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; l4_root_clk_div: l4_root_clk_div { @@ -684,7 +686,7 @@ compatible = "fixed-factor-clock"; clocks = <&l3_iclk_div>; clock-mult = <1>; - clock-div = <1>; + clock-div = <2>; }; video1_clk2_div: video1_clk2_div { -- cgit v1.2.3 From 701a9e619347ac06d59481db14bbc4df99763270 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 1 Jul 2014 14:39:04 -0700 Subject: mwifiex: initialize Tx/Rx info of a packet correctly There are few places at the begining of Tx/Rx paths where tx_info/rx_info is not correctly initialized. This patch takes care of it. Signed-off-by: Amitkumar Karwar Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/11n_aggr.c | 1 + drivers/net/wireless/mwifiex/cfg80211.c | 1 + drivers/net/wireless/mwifiex/cmdevt.c | 1 + drivers/net/wireless/mwifiex/sta_tx.c | 1 + drivers/net/wireless/mwifiex/tdls.c | 2 ++ drivers/net/wireless/mwifiex/txrx.c | 1 + drivers/net/wireless/mwifiex/uap_txrx.c | 1 + 7 files changed, 8 insertions(+) diff --git a/drivers/net/wireless/mwifiex/11n_aggr.c b/drivers/net/wireless/mwifiex/11n_aggr.c index 5b32106182f8..fe0f66f73507 100644 --- a/drivers/net/wireless/mwifiex/11n_aggr.c +++ b/drivers/net/wireless/mwifiex/11n_aggr.c @@ -185,6 +185,7 @@ mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv, skb_reserve(skb_aggr, headroom + sizeof(struct txpd)); tx_info_aggr = MWIFIEX_SKB_TXCB(skb_aggr); + memset(tx_info_aggr, 0, sizeof(*tx_info_aggr)); tx_info_aggr->bss_type = tx_info_src->bss_type; tx_info_aggr->bss_num = tx_info_src->bss_num; diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index e95dec91a561..b511613bba2d 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -220,6 +220,7 @@ mwifiex_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, } tx_info = MWIFIEX_SKB_TXCB(skb); + memset(tx_info, 0, sizeof(*tx_info)); tx_info->bss_num = priv->bss_num; tx_info->bss_type = priv->bss_type; tx_info->pkt_len = pkt_len; diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c index 8dee6c86f4f1..c161141f6c39 100644 --- a/drivers/net/wireless/mwifiex/cmdevt.c +++ b/drivers/net/wireless/mwifiex/cmdevt.c @@ -453,6 +453,7 @@ int mwifiex_process_event(struct mwifiex_adapter *adapter) if (skb) { rx_info = MWIFIEX_SKB_RXCB(skb); + memset(rx_info, 0, sizeof(*rx_info)); rx_info->bss_num = priv->bss_num; rx_info->bss_type = priv->bss_type; } diff --git a/drivers/net/wireless/mwifiex/sta_tx.c b/drivers/net/wireless/mwifiex/sta_tx.c index 5fce7e78a36e..70eb863c7249 100644 --- a/drivers/net/wireless/mwifiex/sta_tx.c +++ b/drivers/net/wireless/mwifiex/sta_tx.c @@ -150,6 +150,7 @@ int mwifiex_send_null_packet(struct mwifiex_private *priv, u8 flags) return -1; tx_info = MWIFIEX_SKB_TXCB(skb); + memset(tx_info, 0, sizeof(*tx_info)); tx_info->bss_num = priv->bss_num; tx_info->bss_type = priv->bss_type; tx_info->pkt_len = data_len - (sizeof(struct txpd) + INTF_HEADER_LEN); diff --git a/drivers/net/wireless/mwifiex/tdls.c b/drivers/net/wireless/mwifiex/tdls.c index e73034fbbde9..0e88364e0c67 100644 --- a/drivers/net/wireless/mwifiex/tdls.c +++ b/drivers/net/wireless/mwifiex/tdls.c @@ -605,6 +605,7 @@ int mwifiex_send_tdls_data_frame(struct mwifiex_private *priv, const u8 *peer, } tx_info = MWIFIEX_SKB_TXCB(skb); + memset(tx_info, 0, sizeof(*tx_info)); tx_info->bss_num = priv->bss_num; tx_info->bss_type = priv->bss_type; @@ -760,6 +761,7 @@ int mwifiex_send_tdls_action_frame(struct mwifiex_private *priv, const u8 *peer, skb->priority = MWIFIEX_PRIO_VI; tx_info = MWIFIEX_SKB_TXCB(skb); + memset(tx_info, 0, sizeof(*tx_info)); tx_info->bss_num = priv->bss_num; tx_info->bss_type = priv->bss_type; tx_info->flags |= MWIFIEX_BUF_FLAG_TDLS_PKT; diff --git a/drivers/net/wireless/mwifiex/txrx.c b/drivers/net/wireless/mwifiex/txrx.c index 37f26afd4314..fd7e5b9b4581 100644 --- a/drivers/net/wireless/mwifiex/txrx.c +++ b/drivers/net/wireless/mwifiex/txrx.c @@ -55,6 +55,7 @@ int mwifiex_handle_rx_packet(struct mwifiex_adapter *adapter, return -1; } + memset(rx_info, 0, sizeof(*rx_info)); rx_info->bss_num = priv->bss_num; rx_info->bss_type = priv->bss_type; diff --git a/drivers/net/wireless/mwifiex/uap_txrx.c b/drivers/net/wireless/mwifiex/uap_txrx.c index 9a56bc61cb1d..b0601b91cc4f 100644 --- a/drivers/net/wireless/mwifiex/uap_txrx.c +++ b/drivers/net/wireless/mwifiex/uap_txrx.c @@ -175,6 +175,7 @@ static void mwifiex_uap_queue_bridged_pkt(struct mwifiex_private *priv, } tx_info = MWIFIEX_SKB_TXCB(skb); + memset(tx_info, 0, sizeof(*tx_info)); tx_info->bss_num = priv->bss_num; tx_info->bss_type = priv->bss_type; tx_info->flags |= MWIFIEX_BUF_FLAG_BRIDGED_PKT; -- cgit v1.2.3 From 066b7ed9558087a7957a1128f27d7a3462ff117f Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Fri, 4 Jul 2014 14:29:30 +0200 Subject: kbuild: Do not print the build directory with make -s Commit c2e28dc9 (kbuild: Print the name of the build directory) prints the name of the build directory for O= builds, but we should not be doing this in make -s mode, so that commands like make -s O= kernelrelease can be used by scripts. This matches the behavior of make itself, where the -s option implies --no-print-directory. Signed-off-by: Michal Marek --- Makefile | 97 +++++++++++++++++++++++++++++++++------------------------------- 1 file changed, 50 insertions(+), 47 deletions(-) diff --git a/Makefile b/Makefile index 40544a0babdc..1a5f9f3c7a58 100644 --- a/Makefile +++ b/Makefile @@ -41,6 +41,29 @@ unexport GREP_OPTIONS # descending is started. They are now explicitly listed as the # prepare rule. +# Beautify output +# --------------------------------------------------------------------------- +# +# Normally, we echo the whole command before executing it. By making +# that echo $($(quiet)$(cmd)), we now have the possibility to set +# $(quiet) to choose other forms of output instead, e.g. +# +# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ +# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< +# +# If $(quiet) is empty, the whole command will be printed. +# If it is set to "quiet_", only the short version will be printed. +# If it is set to "silent_", nothing will be printed at all, since +# the variable $(silent_cmd_cc_o_c) doesn't exist. +# +# A simple variant is to prefix commands with $(Q) - that's useful +# for commands that shall be hidden in non-verbose mode. +# +# $(Q)ln $@ :< +# +# If KBUILD_VERBOSE equals 0 then the above command will be hidden. +# If KBUILD_VERBOSE equals 1 then the above command is displayed. +# # To put more focus on warnings, be less verbose as default # Use 'make V=1' to see the full commands @@ -51,6 +74,29 @@ ifndef KBUILD_VERBOSE KBUILD_VERBOSE = 0 endif +ifeq ($(KBUILD_VERBOSE),1) + quiet = + Q = +else + quiet=quiet_ + Q = @ +endif + +# If the user is running make -s (silent mode), suppress echoing of +# commands + +ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 +ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) + quiet=silent_ +endif +else # make-3.8x +ifneq ($(filter s% -s%,$(MAKEFLAGS)),) + quiet=silent_ +endif +endif + +export quiet Q KBUILD_VERBOSE + # Call a source code checker (by default, "sparse") as part of the # C compilation. # @@ -128,8 +174,11 @@ $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make # Fake the "Entering directory" message once, so that IDEs/editors are # able to understand relative filenames. + echodir := @echo + quiet_echodir := @echo +silent_echodir := @: sub-make: FORCE - @echo "make[1]: Entering directory \`$(KBUILD_OUTPUT)'" + $($(quiet)echodir) "make[1]: Entering directory \`$(KBUILD_OUTPUT)'" $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \ KBUILD_SRC=$(CURDIR) \ KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \ @@ -292,52 +341,6 @@ endif export KBUILD_MODULES KBUILD_BUILTIN export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD -# Beautify output -# --------------------------------------------------------------------------- -# -# Normally, we echo the whole command before executing it. By making -# that echo $($(quiet)$(cmd)), we now have the possibility to set -# $(quiet) to choose other forms of output instead, e.g. -# -# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ -# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< -# -# If $(quiet) is empty, the whole command will be printed. -# If it is set to "quiet_", only the short version will be printed. -# If it is set to "silent_", nothing will be printed at all, since -# the variable $(silent_cmd_cc_o_c) doesn't exist. -# -# A simple variant is to prefix commands with $(Q) - that's useful -# for commands that shall be hidden in non-verbose mode. -# -# $(Q)ln $@ :< -# -# If KBUILD_VERBOSE equals 0 then the above command will be hidden. -# If KBUILD_VERBOSE equals 1 then the above command is displayed. - -ifeq ($(KBUILD_VERBOSE),1) - quiet = - Q = -else - quiet=quiet_ - Q = @ -endif - -# If the user is running make -s (silent mode), suppress echoing of -# commands - -ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 -ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) - quiet=silent_ -endif -else # make-3.8x -ifneq ($(filter s% -s%,$(MAKEFLAGS)),) - quiet=silent_ -endif -endif - -export quiet Q KBUILD_VERBOSE - ifneq ($(CC),) ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1) COMPILER := clang -- cgit v1.2.3 From fb9a0c443691ceaab3daba966bbbd9f5ff3aa26f Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Fri, 27 Jun 2014 10:42:03 +0100 Subject: xen/balloon: set ballooned out pages as invalid in p2m Since cd9151e26d31048b2b5e00fd02e110e07d2200c9 (xen/balloon: set a mapping for ballooned out pages), a ballooned out page had its entry in the p2m set to the MFN of one of the scratch pages. This means that the p2m will contain many entries pointing to the same MFN. During a domain save, these many-to-one entries are not identified as such and the scratch page is saved multiple times. On restore the ballooned pages are populated with new frames and the domain may use up its allocation before all pages can be restored. Since the original fix only needed to keep a mapping for the ballooned page it is safe to set ballooned out pages as INVALID_P2M_ENTRY in the p2m (as they were before). Thus preventing them from being saved and re-populated on restore. Signed-off-by: David Vrabel Reported-by: Marek Marczykowski Tested-by: Marek Marczykowski Acked-by: Stefano Stabellini Cc: --- drivers/xen/balloon.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index b7a506f2bb14..5c660c77f03b 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -426,20 +426,18 @@ static enum bp_state decrease_reservation(unsigned long nr_pages, gfp_t gfp) * p2m are consistent. */ if (!xen_feature(XENFEAT_auto_translated_physmap)) { - unsigned long p; - struct page *scratch_page = get_balloon_scratch_page(); - if (!PageHighMem(page)) { + struct page *scratch_page = get_balloon_scratch_page(); + ret = HYPERVISOR_update_va_mapping( (unsigned long)__va(pfn << PAGE_SHIFT), pfn_pte(page_to_pfn(scratch_page), PAGE_KERNEL_RO), 0); BUG_ON(ret); - } - p = page_to_pfn(scratch_page); - __set_phys_to_machine(pfn, pfn_to_mfn(p)); - put_balloon_scratch_page(); + put_balloon_scratch_page(); + } + __set_phys_to_machine(pfn, INVALID_P2M_ENTRY); } #endif -- cgit v1.2.3 From c79624c1a698a82747b1e6fe54cc7effa4c07aa5 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Fri, 4 Jul 2014 22:53:52 +0200 Subject: kbuild: Fix packaging targets with relative $(srctree) All other users of Makefile.build set $(obj) to the name of the subdirectory to build. Do the same for the packaging targets, otherwise the build fails if $(srctree) is a relative directory: $ make O=build tar-pkg make[1]: Entering directory `/home/mmarek/linux-2.6/build' CHK include/config/kernel.release ../scripts/Makefile.build:44: ../../scripts/package/Makefile: No such file or directory make[2]: *** No rule to make target `../../scripts/package/Makefile'. Stop. Fixes: 9da0763b ("kbuild: Use relative path when building in a subdir of the source tree") Signed-off-by: Michal Marek --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 1a5f9f3c7a58..347d6c7c7314 100644 --- a/Makefile +++ b/Makefile @@ -1176,7 +1176,7 @@ distclean: mrproper # Packaging of the kernel to various formats # --------------------------------------------------------------------------- # rpm target kept for backward compatibility -package-dir := $(srctree)/scripts/package +package-dir := scripts/package %src-pkg: FORCE $(Q)$(MAKE) $(build)=$(package-dir) $@ -- cgit v1.2.3 From 73ea6ec66a9f6b81335e55ca642f25172c283b20 Mon Sep 17 00:00:00 2001 From: Abhilash Kesavan Date: Sat, 5 Jul 2014 06:09:18 +0900 Subject: ARM: EXYNOS: Fix the check for non-smp configuration Commit 1754c42e3db5("ARM: exynos: move sysram info to exynos.c") missed out the CONFIG_ prefix causing exynos_sysram_init() to get called twice for SMP configurations. Signed-off-by: Abhilash Kesavan Reviewed-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/exynos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index f38cf7c110cc..95cad252eb1b 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -297,7 +297,7 @@ static void __init exynos_dt_machine_init(void) * This is called from smp_prepare_cpus if we've built for SMP, but * we still need to set it up for PM and firmware ops if not. */ - if (!IS_ENABLED(SMP)) + if (!IS_ENABLED(CONFIG_SMP)) exynos_sysram_init(); exynos_cpuidle_init(); -- cgit v1.2.3 From 2fd82d33011479e4ee3b1df8ddaa561201fe145d Mon Sep 17 00:00:00 2001 From: Jaewon Kim Date: Sat, 5 Jul 2014 06:31:31 +0900 Subject: ARM: dts: fix pwm-cells in pwm node for exynos4 pwm-cells should be 3. Third cell is optional PWM flags. And This flag supported by this binding is PWM_POLARITY_INVERTED. Signed-off-by: Jaewon Kim Reviewed-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index fbaf426d2daa..17b22e9cc2aa 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -554,7 +554,7 @@ interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>; clocks = <&clock CLK_PWM>; clock-names = "timers"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; -- cgit v1.2.3 From 89e6a13b88c8bf7ce1011a8a69113f22889f4585 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Sat, 5 Jul 2014 06:38:55 +0900 Subject: clocksource: exynos_mct: Fix ftrace In (93bfb76 clocksource: exynos_mct: register sched_clock callback) we supported using the MCT as a scheduler clock. We properly marked exynos4_read_sched_clock() as notrace. However, we then went and called another function that _wasn't_ notrace. That means if you do: cd /sys/kernel/debug/tracing/ echo function_graph > current_tracer You'll get a crash. Fix this (but still let other readers of the MCT be trace-enabled) by adding an extra function. It's important to keep other users of MCT traceable because the MCT is actually quite slow to access and we want exynos4_frc_read() to show up in ftrace profiles if it's the bottleneck. Signed-off-by: Doug Anderson Signed-off-by: Kukjin Kim --- drivers/clocksource/exynos_mct.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index f71d55f5e6e5..5ce99c07ce8c 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -162,7 +162,7 @@ static void exynos4_mct_frc_start(void) exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON); } -static cycle_t exynos4_frc_read(struct clocksource *cs) +static cycle_t notrace _exynos4_frc_read(void) { unsigned int lo, hi; u32 hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U); @@ -176,6 +176,11 @@ static cycle_t exynos4_frc_read(struct clocksource *cs) return ((cycle_t)hi << 32) | lo; } +static cycle_t exynos4_frc_read(struct clocksource *cs) +{ + return _exynos4_frc_read(); +} + static void exynos4_frc_resume(struct clocksource *cs) { exynos4_mct_frc_start(); @@ -192,7 +197,7 @@ struct clocksource mct_frc = { static u64 notrace exynos4_read_sched_clock(void) { - return exynos4_frc_read(&mct_frc); + return _exynos4_frc_read(); } static void __init exynos4_clocksource_init(void) -- cgit v1.2.3 From 8bf13a4346996b5a53d5f0c64b0914693c818fc2 Mon Sep 17 00:00:00 2001 From: Amit Daniel Kachhap Date: Sat, 5 Jul 2014 06:40:23 +0900 Subject: clocksource: exynos_mct: Register the timer for stable udelay This patch registers the exynos mct clocksource as the current timer as it has constant clock rate. This will generate correct udelay for the exynos platform and avoid using unnecessary calibrated jiffies. This change has been tested on exynos5420 based board and udelay is very close to expected. Without this patch udelay() on exynos5400 / exynos5800 is wildly inaccurate due to big.LITTLE not adjusting loops_per_jiffy correctly. Also without this patch udelay() on exynos5250 can be innacruate during transitions between frequencies < 800 MHz (you'll go 200 MHz -> 800 MHz -> 300 MHz and will run at 800 MHz for a time with the wrong loops_per_jiffy). [dianders: reworked and created version 3] Signed-off-by: Amit Daniel Kachhap Signed-off-by: Doug Anderson Signed-off-by: Kukjin Kim --- drivers/clocksource/exynos_mct.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index 5ce99c07ce8c..ab51bf20a3ed 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -200,10 +200,21 @@ static u64 notrace exynos4_read_sched_clock(void) return _exynos4_frc_read(); } +static struct delay_timer exynos4_delay_timer; + +static cycles_t exynos4_read_current_timer(void) +{ + return _exynos4_frc_read(); +} + static void __init exynos4_clocksource_init(void) { exynos4_mct_frc_start(); + exynos4_delay_timer.read_current_timer = &exynos4_read_current_timer; + exynos4_delay_timer.freq = clk_rate; + register_current_timer_delay(&exynos4_delay_timer); + if (clocksource_register_hz(&mct_frc, clk_rate)) panic("%s: can't register clocksource\n", mct_frc.name); -- cgit v1.2.3 From ef8290ac727b1718417a781412fb6c25e97b5389 Mon Sep 17 00:00:00 2001 From: Michael Welling Date: Tue, 10 Jun 2014 13:46:34 -0500 Subject: gpio: mcp23s08: Eliminates redundant checking. Unnecessary checking was added during the merge of the gpio branch. This patch removes the extra unnecessary checking. Signed-off-by: Michael Welling Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mcp23s08.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c index fe7c0e211f9a..57adbc90fdad 100644 --- a/drivers/gpio/gpio-mcp23s08.c +++ b/drivers/gpio/gpio-mcp23s08.c @@ -900,8 +900,6 @@ static int mcp23s08_probe(struct spi_device *spi) if (spi_present_mask & (1 << addr)) chips++; } - if (!chips) - return -ENODEV; } else { type = spi_get_device_id(spi)->driver_data; pdata = dev_get_platdata(&spi->dev); @@ -940,10 +938,6 @@ static int mcp23s08_probe(struct spi_device *spi) if (!(spi_present_mask & (1 << addr))) continue; chips--; - if (chips < 0) { - dev_err(&spi->dev, "FATAL: invalid negative chip id\n"); - goto fail; - } data->mcp[addr] = &data->chip[chips]; status = mcp23s08_probe_one(data->mcp[addr], &spi->dev, spi, 0x40 | (addr << 1), type, base, -- cgit v1.2.3 From 1419d8151be990f115c38deac497ad84d26434dd Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 11 Jun 2014 11:15:13 +0300 Subject: pinctrl: berlin: fix an error code in berlin_pinctrl_probe() We are returning success here because PTR_ERR(NULL) is zero. We should be returning -ENODEV. Fixes: 3de68d331c24 ('pinctrl: berlin: add the core pinctrl driver for Marvell Berlin SoCs') Signed-off-by: Dan Carpenter Acked-by: Sebastian Hesselbarth Signed-off-by: Linus Walleij --- drivers/pinctrl/berlin/berlin.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/berlin/berlin.c b/drivers/pinctrl/berlin/berlin.c index edf5d2fd2b22..86db2235ab00 100644 --- a/drivers/pinctrl/berlin/berlin.c +++ b/drivers/pinctrl/berlin/berlin.c @@ -320,7 +320,7 @@ int berlin_pinctrl_probe(struct platform_device *pdev, regmap = dev_get_regmap(&pdev->dev, NULL); if (!regmap) - return PTR_ERR(regmap); + return -ENODEV; pctrl = devm_kzalloc(dev, sizeof(*pctrl), GFP_KERNEL); if (!pctrl) -- cgit v1.2.3 From 6c3d8d4f05ec477f68615dc6120c46fec64a2268 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 7 Mar 2014 07:44:00 +0000 Subject: iio: hid-sensor-press: Fix return values IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored the actual return values (which could be -EINVAL) and instead returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO upon success. Agreed with by Srinivas. Signed-off-by: Sachin Kamat Cc: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/hid-sensor-press.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/iio/pressure/hid-sensor-press.c b/drivers/iio/pressure/hid-sensor-press.c index 1cd190c73788..2c0d2a4fed8c 100644 --- a/drivers/iio/pressure/hid-sensor-press.c +++ b/drivers/iio/pressure/hid-sensor-press.c @@ -78,7 +78,6 @@ static int press_read_raw(struct iio_dev *indio_dev, struct press_state *press_state = iio_priv(indio_dev); int report_id = -1; u32 address; - int ret; int ret_type; s32 poll_value; @@ -128,14 +127,12 @@ static int press_read_raw(struct iio_dev *indio_dev, ret_type = IIO_VAL_INT; break; case IIO_CHAN_INFO_SAMP_FREQ: - ret = hid_sensor_read_samp_freq_value( + ret_type = hid_sensor_read_samp_freq_value( &press_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; case IIO_CHAN_INFO_HYSTERESIS: - ret = hid_sensor_read_raw_hyst_value( + ret_type = hid_sensor_read_raw_hyst_value( &press_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; default: ret_type = -EINVAL; -- cgit v1.2.3 From 2f084c17562a3a20ee0cc11d3863ca5e8fd4e10b Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 7 Mar 2014 07:44:00 +0000 Subject: iio: hid-sensor-accel-3d: Fix return values IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored the actual return values (which could be -EINVAL) and instead returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO upon success. Signed-off-by: Sachin Kamat Cc: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/accel/hid-sensor-accel-3d.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c index 69abf9163df7..54e464e4bb72 100644 --- a/drivers/iio/accel/hid-sensor-accel-3d.c +++ b/drivers/iio/accel/hid-sensor-accel-3d.c @@ -110,7 +110,6 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev, struct accel_3d_state *accel_state = iio_priv(indio_dev); int report_id = -1; u32 address; - int ret; int ret_type; s32 poll_value; @@ -151,14 +150,12 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev, ret_type = IIO_VAL_INT; break; case IIO_CHAN_INFO_SAMP_FREQ: - ret = hid_sensor_read_samp_freq_value( + ret_type = hid_sensor_read_samp_freq_value( &accel_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; case IIO_CHAN_INFO_HYSTERESIS: - ret = hid_sensor_read_raw_hyst_value( + ret_type = hid_sensor_read_raw_hyst_value( &accel_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; default: ret_type = -EINVAL; -- cgit v1.2.3 From 5f25b41f7ec242fce43d0f745369c0ba9d25cb72 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 7 Mar 2014 07:44:00 +0000 Subject: iio: hid-sensor-magn-3d: Fix return values IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored the actual return values (which could be -EINVAL) and instead returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO upon success. Signed-off-by: Sachin Kamat Cc: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/magnetometer/hid-sensor-magn-3d.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c index 41cf29e2a371..b2b0937d5133 100644 --- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c +++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c @@ -110,7 +110,6 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev, struct magn_3d_state *magn_state = iio_priv(indio_dev); int report_id = -1; u32 address; - int ret; int ret_type; s32 poll_value; @@ -153,14 +152,12 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev, ret_type = IIO_VAL_INT; break; case IIO_CHAN_INFO_SAMP_FREQ: - ret = hid_sensor_read_samp_freq_value( + ret_type = hid_sensor_read_samp_freq_value( &magn_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; case IIO_CHAN_INFO_HYSTERESIS: - ret = hid_sensor_read_raw_hyst_value( + ret_type = hid_sensor_read_raw_hyst_value( &magn_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; default: ret_type = -EINVAL; -- cgit v1.2.3 From 5d24b0b37bd5229227d0271c58b15aeb52e9c966 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 7 Mar 2014 07:44:00 +0000 Subject: iio: hid-sensor-als: Fix return values IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored the actual return values (which could be -EINVAL) and instead returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO upon success. Signed-off-by: Sachin Kamat Cc: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/light/hid-sensor-als.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c index f34c94380b41..96e71e103ea7 100644 --- a/drivers/iio/light/hid-sensor-als.c +++ b/drivers/iio/light/hid-sensor-als.c @@ -79,7 +79,6 @@ static int als_read_raw(struct iio_dev *indio_dev, struct als_state *als_state = iio_priv(indio_dev); int report_id = -1; u32 address; - int ret; int ret_type; s32 poll_value; @@ -129,14 +128,12 @@ static int als_read_raw(struct iio_dev *indio_dev, ret_type = IIO_VAL_INT; break; case IIO_CHAN_INFO_SAMP_FREQ: - ret = hid_sensor_read_samp_freq_value( + ret_type = hid_sensor_read_samp_freq_value( &als_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; case IIO_CHAN_INFO_HYSTERESIS: - ret = hid_sensor_read_raw_hyst_value( + ret_type = hid_sensor_read_raw_hyst_value( &als_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; default: ret_type = -EINVAL; -- cgit v1.2.3 From 27793803f2ea876799cc44e05bb28d34b34a3869 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 7 Mar 2014 07:44:00 +0000 Subject: iio: hid-sensor-gyro-3d: Fix return values IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored the actual return values (which could be -EINVAL) and instead returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO upon success. Signed-off-by: Sachin Kamat Cc: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/gyro/hid-sensor-gyro-3d.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c index 40f4e4935d0d..fa034a3dad78 100644 --- a/drivers/iio/gyro/hid-sensor-gyro-3d.c +++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c @@ -110,7 +110,6 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev, struct gyro_3d_state *gyro_state = iio_priv(indio_dev); int report_id = -1; u32 address; - int ret; int ret_type; s32 poll_value; @@ -151,14 +150,12 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev, ret_type = IIO_VAL_INT; break; case IIO_CHAN_INFO_SAMP_FREQ: - ret = hid_sensor_read_samp_freq_value( + ret_type = hid_sensor_read_samp_freq_value( &gyro_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; case IIO_CHAN_INFO_HYSTERESIS: - ret = hid_sensor_read_raw_hyst_value( + ret_type = hid_sensor_read_raw_hyst_value( &gyro_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; default: ret_type = -EINVAL; -- cgit v1.2.3 From 4ff9f633c35e2d94eb92f92c48ae0d9172242889 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 7 Mar 2014 07:44:00 +0000 Subject: iio: hid-sensor-prox: Fix return values IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored the actual return values (which could be -EINVAL) and instead returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO upon success. Signed-off-by: Sachin Kamat Cc: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/light/hid-sensor-prox.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c index d203ef4d892f..412bae86d6ae 100644 --- a/drivers/iio/light/hid-sensor-prox.c +++ b/drivers/iio/light/hid-sensor-prox.c @@ -74,7 +74,6 @@ static int prox_read_raw(struct iio_dev *indio_dev, struct prox_state *prox_state = iio_priv(indio_dev); int report_id = -1; u32 address; - int ret; int ret_type; s32 poll_value; @@ -125,14 +124,12 @@ static int prox_read_raw(struct iio_dev *indio_dev, ret_type = IIO_VAL_INT; break; case IIO_CHAN_INFO_SAMP_FREQ: - ret = hid_sensor_read_samp_freq_value( + ret_type = hid_sensor_read_samp_freq_value( &prox_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; case IIO_CHAN_INFO_HYSTERESIS: - ret = hid_sensor_read_raw_hyst_value( + ret_type = hid_sensor_read_raw_hyst_value( &prox_state->common_attributes, val, val2); - ret_type = IIO_VAL_INT_PLUS_MICRO; break; default: ret_type = -EINVAL; -- cgit v1.2.3 From 61c219f5814277ecb71d64cb30297028d6665979 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 5 Jul 2014 16:28:35 -0400 Subject: ext4: fix unjournalled bg descriptor while initializing inode bitmap The first time that we allocate from an uninitialized inode allocation bitmap, if the block allocation bitmap is also uninitalized, we need to get write access to the block group descriptor before we start modifying the block group descriptor flags and updating the free block count, etc. Otherwise, there is the potential of a bad journal checksum (if journal checksums are enabled), and of the file system becoming inconsistent if we crash at exactly the wrong time. Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- fs/ext4/ialloc.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index a87455df38bc..0840bf321cdb 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -874,6 +874,13 @@ got: goto out; } + BUFFER_TRACE(group_desc_bh, "get_write_access"); + err = ext4_journal_get_write_access(handle, group_desc_bh); + if (err) { + ext4_std_error(sb, err); + goto out; + } + /* We may have to initialize the block bitmap if it isn't already */ if (ext4_has_group_desc_csum(sb) && gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) { @@ -910,13 +917,6 @@ got: } } - BUFFER_TRACE(group_desc_bh, "get_write_access"); - err = ext4_journal_get_write_access(handle, group_desc_bh); - if (err) { - ext4_std_error(sb, err); - goto out; - } - /* Update the relevant bg descriptor fields */ if (ext4_has_group_desc_csum(sb)) { int free; -- cgit v1.2.3 From bf177a1eb6d106ba195de86734392d43dfbef702 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 5 Jul 2014 11:35:52 -0600 Subject: MAINTAINERS: Update mx6 PCI driver maintainer's email Use Shawn's email address from Freescale. Signed-off-by: Fabio Estevam Signed-off-by: Bjorn Helgaas Acked-by: Shawn Guo --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 134483f206e4..f35d07d284b6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6774,7 +6774,7 @@ F: arch/x86/kernel/quirks.c PCI DRIVER FOR IMX6 M: Richard Zhu -M: Shawn Guo +M: Shawn Guo L: linux-pci@vger.kernel.org L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -- cgit v1.2.3 From ae0f78de2c43b6fadd007c231a352b13b5be8ed2 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 5 Jul 2014 18:40:52 -0400 Subject: ext4: clarify error count warning messages Make it clear that values printed are times, and that it is error since last fsck. Also add note about fsck version required. Signed-off-by: Pavel Machek Signed-off-by: Theodore Ts'o Reviewed-by: Andreas Dilger Cc: stable@vger.kernel.org --- fs/ext4/super.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index b9b9aabfb4d2..342394772b6c 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2809,10 +2809,11 @@ static void print_daily_error_info(unsigned long arg) es = sbi->s_es; if (es->s_error_count) - ext4_msg(sb, KERN_NOTICE, "error count: %u", + /* fsck newer than v1.41.13 is needed to clean this condition. */ + ext4_msg(sb, KERN_NOTICE, "error count since last fsck: %u", le32_to_cpu(es->s_error_count)); if (es->s_first_error_time) { - printk(KERN_NOTICE "EXT4-fs (%s): initial error at %u: %.*s:%d", + printk(KERN_NOTICE "EXT4-fs (%s): initial error at time %u: %.*s:%d", sb->s_id, le32_to_cpu(es->s_first_error_time), (int) sizeof(es->s_first_error_func), es->s_first_error_func, @@ -2826,7 +2827,7 @@ static void print_daily_error_info(unsigned long arg) printk("\n"); } if (es->s_last_error_time) { - printk(KERN_NOTICE "EXT4-fs (%s): last error at %u: %.*s:%d", + printk(KERN_NOTICE "EXT4-fs (%s): last error at time %u: %.*s:%d", sb->s_id, le32_to_cpu(es->s_last_error_time), (int) sizeof(es->s_last_error_func), es->s_last_error_func, -- cgit v1.2.3 From 6938ad40cb97a52d88a763008935340729a4acc7 Mon Sep 17 00:00:00 2001 From: Ted Juan Date: Fri, 20 Jun 2014 17:32:05 +0800 Subject: mtd: devices: elm: fix elm_context_save() and elm_context_restore() functions These two function's switch case lack the 'break' that make them always return error. Signed-off-by: Ted Juan Acked-by: Pekon Gupta Cc: # 3.12.x+ Signed-off-by: Brian Norris --- drivers/mtd/devices/elm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mtd/devices/elm.c b/drivers/mtd/devices/elm.c index 7df86948e6d4..b4f61c7fc161 100644 --- a/drivers/mtd/devices/elm.c +++ b/drivers/mtd/devices/elm.c @@ -475,6 +475,7 @@ static int elm_context_save(struct elm_info *info) ELM_SYNDROME_FRAGMENT_1 + offset); regs->elm_syndrome_fragment_0[i] = elm_read_reg(info, ELM_SYNDROME_FRAGMENT_0 + offset); + break; default: return -EINVAL; } @@ -520,6 +521,7 @@ static int elm_context_restore(struct elm_info *info) regs->elm_syndrome_fragment_1[i]); elm_write_reg(info, ELM_SYNDROME_FRAGMENT_0 + offset, regs->elm_syndrome_fragment_0[i]); + break; default: return -EINVAL; } -- cgit v1.2.3 From 94d4c066a4ff170a2671b1a9b153febbf36796f6 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 5 Jul 2014 19:15:50 -0400 Subject: ext4: clarify ext4_error message in ext4_mb_generate_buddy_error() We are spending a lot of time explaining to users what this error means. Let's try to improve the message to avoid this problem. Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- fs/ext4/mballoc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 7f72f50a8fa7..2dcb936be90e 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -752,8 +752,8 @@ void ext4_mb_generate_buddy(struct super_block *sb, if (free != grp->bb_free) { ext4_grp_locked_error(sb, group, 0, 0, - "%u clusters in bitmap, %u in gd; " - "block bitmap corrupt.", + "block bitmap and bg descriptor " + "inconsistent: %u vs %u free clusters", free, grp->bb_free); /* * If we intend to continue, we consider group descriptor -- cgit v1.2.3 From 5dd214248f94d430d70e9230bda72f2654ac88a8 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Sat, 5 Jul 2014 19:18:22 -0400 Subject: ext4: disable synchronous transaction batching if max_batch_time==0 The mount manpage says of the max_batch_time option, This optimization can be turned off entirely by setting max_batch_time to 0. But the code doesn't do that. So fix the code to do that. Signed-off-by: Eric Sandeen Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- fs/ext4/super.c | 2 -- fs/jbd2/transaction.c | 5 ++++- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 342394772b6c..6297c07c937f 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1525,8 +1525,6 @@ static int handle_mount_opt(struct super_block *sb, char *opt, int token, arg = JBD2_DEFAULT_MAX_COMMIT_AGE; sbi->s_commit_interval = HZ * arg; } else if (token == Opt_max_batch_time) { - if (arg == 0) - arg = EXT4_DEF_MAX_BATCH_TIME; sbi->s_max_batch_time = arg; } else if (token == Opt_min_batch_time) { sbi->s_min_batch_time = arg; diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c index 38cfcf5f6fce..6f0f590cc5a3 100644 --- a/fs/jbd2/transaction.c +++ b/fs/jbd2/transaction.c @@ -1588,9 +1588,12 @@ int jbd2_journal_stop(handle_t *handle) * to perform a synchronous write. We do this to detect the * case where a single process is doing a stream of sync * writes. No point in waiting for joiners in that case. + * + * Setting max_batch_time to 0 disables this completely. */ pid = current->pid; - if (handle->h_sync && journal->j_last_sync_writer != pid) { + if (handle->h_sync && journal->j_last_sync_writer != pid && + journal->j_max_batch_time) { u64 commit_time, trans_time; journal->j_last_sync_writer = pid; -- cgit v1.2.3 From 0cd8d4052ae4c690fc3ea6133a0ad5404360308d Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Sun, 6 Jul 2014 15:51:23 -0600 Subject: ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver The commit 7be914f {ARM: OMAP3: PRM/CM: Cleanup unused header} removed some of the macros used by the TI DSP/Bridge driver. This fixes the following build errors when trying to build DSP/Bridge driver (disabled at present), otherwise results in the following build errors: drivers/staging/tidspbridge/core/tiomap3430.c:531:31: error: 'OMAP3430_AUTO_IVA2_DPLL_SHIFT' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430.c:531:31: note: each undeclared identifier is reported only once for each function it appears in make[3]: *** [drivers/staging/tidspbridge/core/tiomap3430.o] Error 1 make[3]: *** Waiting for unfinished jobs.... drivers/staging/tidspbridge/core/tiomap_io.c: In function 'sm_interrupt_dsp': drivers/staging/tidspbridge/core/tiomap_io.c:404:31: error: 'OMAP3430_AUTO_IVA2_DPLL_SHIFT' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap_io.c:404:31: note: each undeclared identifier is reported only once for each function it appears in drivers/staging/tidspbridge/core/tiomap_io.c:414:12: error: 'OMAP3430_IVA2_DPLL_FREQSEL_SHIFT' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap_io.c:415:12: error: 'OMAP3430_EN_IVA2_DPLL_SHIFT' undeclared (first use in this function) make[3]: *** [drivers/staging/tidspbridge/core/tiomap_io.o] Error 1 drivers/staging/tidspbridge/core/tiomap3430_pwr.c: In function 'dsp_clk_wakeup_event_ctrl': drivers/staging/tidspbridge/core/tiomap3430_pwr.c:442:19: error: 'OMAP3430_GRPSEL_GPT5_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:442:19: note: each undeclared identifier is reported only once for each function it appears in drivers/staging/tidspbridge/core/tiomap3430_pwr.c:455:19: error: 'OMAP3430_GRPSEL_GPT6_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:468:19: error: 'OMAP3430_GRPSEL_GPT7_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:481:19: error: 'OMAP3430_GRPSEL_GPT8_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:494:19: error: 'OMAP3430_GRPSEL_MCBSP1_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:546:19: error: 'OMAP3430_GRPSEL_MCBSP5_MASK' undeclared (first use in this function) make[3]: *** [drivers/staging/tidspbridge/core/tiomap3430_pwr.o] Error 1 make[2]: *** [drivers/staging/tidspbridge] Error 2 Fixes: 7be914f (ARM: OMAP3: PRM/CM: Cleanup unused header) Cc: Rajendra Nayak Cc: Paul Walmsley Signed-off-by: Suman Anna Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/cm-regbits-34xx.h | 3 +++ arch/arm/mach-omap2/prm-regbits-34xx.h | 6 ++++++ 2 files changed, 9 insertions(+) diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 04dab2fcf862..ee6c784cd6b7 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -26,11 +26,14 @@ #define OMAP3430_EN_WDT3_SHIFT 12 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK (1 << 0) #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT 0 +#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT 4 #define OMAP3430_IVA2_DPLL_FREQSEL_MASK (0xf << 4) #define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT 3 +#define OMAP3430_EN_IVA2_DPLL_SHIFT 0 #define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0) #define OMAP3430_ST_IVA2_SHIFT 0 #define OMAP3430_ST_IVA2_CLK_MASK (1 << 0) +#define OMAP3430_AUTO_IVA2_DPLL_SHIFT 0 #define OMAP3430_AUTO_IVA2_DPLL_MASK (0x7 << 0) #define OMAP3430_IVA2_CLK_SRC_SHIFT 19 #define OMAP3430_IVA2_CLK_SRC_WIDTH 3 diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index 106132db532b..cbefbd7cfdb5 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -35,6 +35,8 @@ #define OMAP3430_LOGICSTATEST_MASK (1 << 2) #define OMAP3430_LASTLOGICSTATEENTERED_MASK (1 << 2) #define OMAP3430_LASTPOWERSTATEENTERED_MASK (0x3 << 0) +#define OMAP3430_GRPSEL_MCBSP5_MASK (1 << 10) +#define OMAP3430_GRPSEL_MCBSP1_MASK (1 << 9) #define OMAP3630_GRPSEL_UART4_MASK (1 << 18) #define OMAP3430_GRPSEL_GPIO6_MASK (1 << 17) #define OMAP3430_GRPSEL_GPIO5_MASK (1 << 16) @@ -42,6 +44,10 @@ #define OMAP3430_GRPSEL_GPIO3_MASK (1 << 14) #define OMAP3430_GRPSEL_GPIO2_MASK (1 << 13) #define OMAP3430_GRPSEL_UART3_MASK (1 << 11) +#define OMAP3430_GRPSEL_GPT8_MASK (1 << 9) +#define OMAP3430_GRPSEL_GPT7_MASK (1 << 8) +#define OMAP3430_GRPSEL_GPT6_MASK (1 << 7) +#define OMAP3430_GRPSEL_GPT5_MASK (1 << 6) #define OMAP3430_GRPSEL_MCBSP4_MASK (1 << 2) #define OMAP3430_GRPSEL_MCBSP3_MASK (1 << 1) #define OMAP3430_GRPSEL_MCBSP2_MASK (1 << 0) -- cgit v1.2.3 From 1ea0999e085acb5dacaff163c3941b1d91d59c89 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Sun, 6 Jul 2014 15:51:24 -0600 Subject: ARM: DRA7: hwmod: Fixup SATA hwmod Get rid of optional clock as that is now managed by the AHCI platform driver. Correct .mpu_rt_idx to 1 as the module register space (SYSCONFIG..) is passed as the second memory resource in the device tree. Signed-off-by: Roger Quadros Reviewed-by: Rajendra Nayak Tested-by: Sekhar Nori Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 20b4398cec05..1209266a96b1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1268,9 +1268,6 @@ static struct omap_hwmod_class dra7xx_sata_hwmod_class = { }; /* sata */ -static struct omap_hwmod_opt_clk sata_opt_clks[] = { - { .role = "ref_clk", .clk = "sata_ref_clk" }, -}; static struct omap_hwmod dra7xx_sata_hwmod = { .name = "sata", @@ -1278,6 +1275,7 @@ static struct omap_hwmod dra7xx_sata_hwmod = { .clkdm_name = "l3init_clkdm", .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, .main_clk = "func_48m_fclk", + .mpu_rt_idx = 1, .prcm = { .omap4 = { .clkctrl_offs = DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET, @@ -1285,8 +1283,6 @@ static struct omap_hwmod dra7xx_sata_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .opt_clks = sata_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(sata_opt_clks), }; /* -- cgit v1.2.3 From d904b38df0db137dc5f562010231f76c443cbe28 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Sun, 6 Jul 2014 15:51:24 -0600 Subject: ARM: DRA7: hwmod: Add SYSCONFIG for usb_otg_ss Add the sysconfig class bits for the Super Speed USB controllers Signed-off-by: Roger Quadros Reviewed-by: Rajendra Nayak Tested-by: Sekhar Nori Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 1209266a96b1..284324f2b98a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1727,8 +1727,20 @@ static struct omap_hwmod dra7xx_uart6_hwmod = { * */ +static struct omap_hwmod_class_sysconfig dra7xx_usb_otg_ss_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SIDLEMODE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + static struct omap_hwmod_class dra7xx_usb_otg_ss_hwmod_class = { .name = "usb_otg_ss", + .sysc = &dra7xx_usb_otg_ss_sysc, }; /* usb_otg_ss1 */ -- cgit v1.2.3 From 6340c8720ce34f35b41a2e15d69fe3d755cb2104 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Wed, 2 Jul 2014 11:47:35 +0300 Subject: ARM: OMAP2+: clock/dpll: fix _dpll_test_fint arithmetics overflow The divider value provided to the _dpll_test_fint can reach value of 256 with J type DPLLs (USB etc.), which causes an overflow with the u8 datatype. Fix this by changing the parameter to be an int instead. Signed-off-by: Tero Kristo [paul@pwsan.com: changed type of 'n' to unsigned int] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clkt_dpll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 332af927f4d3..67fd26a18441 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -76,7 +76,7 @@ * (assuming that it is counting N upwards), or -2 if the enclosing loop * should skip to the next iteration (again assuming N is increasing). */ -static int _dpll_test_fint(struct clk_hw_omap *clk, u8 n) +static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n) { struct dpll_data *dd; long fint, fint_min, fint_max; -- cgit v1.2.3 From e63f6e28dda6de3de2392ddca321e211fd860925 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Mon, 7 Jul 2014 01:13:46 +0200 Subject: Revert "ACPI / AC: Remove AC's proc directory." Revert commit ab0fd674d6ce (ACPI / AC: Remove AC's proc directory.), because some old tools (e.g. kpowersave from kde 3.5.10) are still using /proc/acpi/ac_adapter. Fixes: ab0fd674d6ce (ACPI / AC: Remove AC's proc directory.) Reported-and-tested-by: Sorin Manolache Signed-off-by: Lan Tianyu Cc: All applicable Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ac.c | 130 +++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 128 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index c67f6f5ad611..36b0e61f9c09 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -30,6 +30,10 @@ #include #include #include +#ifdef CONFIG_ACPI_PROCFS_POWER +#include +#include +#endif #include #include #include @@ -52,6 +56,7 @@ MODULE_AUTHOR("Paul Diefenbaugh"); MODULE_DESCRIPTION("ACPI AC Adapter Driver"); MODULE_LICENSE("GPL"); + static int acpi_ac_add(struct acpi_device *device); static int acpi_ac_remove(struct acpi_device *device); static void acpi_ac_notify(struct acpi_device *device, u32 event); @@ -67,6 +72,13 @@ static int acpi_ac_resume(struct device *dev); #endif static SIMPLE_DEV_PM_OPS(acpi_ac_pm, NULL, acpi_ac_resume); +#ifdef CONFIG_ACPI_PROCFS_POWER +extern struct proc_dir_entry *acpi_lock_ac_dir(void); +extern void *acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir); +static int acpi_ac_open_fs(struct inode *inode, struct file *file); +#endif + + static int ac_sleep_before_get_state_ms; static struct acpi_driver acpi_ac_driver = { @@ -91,6 +103,16 @@ struct acpi_ac { #define to_acpi_ac(x) container_of(x, struct acpi_ac, charger) +#ifdef CONFIG_ACPI_PROCFS_POWER +static const struct file_operations acpi_ac_fops = { + .owner = THIS_MODULE, + .open = acpi_ac_open_fs, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + /* -------------------------------------------------------------------------- AC Adapter Management -------------------------------------------------------------------------- */ @@ -143,6 +165,83 @@ static enum power_supply_property ac_props[] = { POWER_SUPPLY_PROP_ONLINE, }; +#ifdef CONFIG_ACPI_PROCFS_POWER +/* -------------------------------------------------------------------------- + FS Interface (/proc) + -------------------------------------------------------------------------- */ + +static struct proc_dir_entry *acpi_ac_dir; + +static int acpi_ac_seq_show(struct seq_file *seq, void *offset) +{ + struct acpi_ac *ac = seq->private; + + + if (!ac) + return 0; + + if (acpi_ac_get_state(ac)) { + seq_puts(seq, "ERROR: Unable to read AC Adapter state\n"); + return 0; + } + + seq_puts(seq, "state: "); + switch (ac->state) { + case ACPI_AC_STATUS_OFFLINE: + seq_puts(seq, "off-line\n"); + break; + case ACPI_AC_STATUS_ONLINE: + seq_puts(seq, "on-line\n"); + break; + default: + seq_puts(seq, "unknown\n"); + break; + } + + return 0; +} + +static int acpi_ac_open_fs(struct inode *inode, struct file *file) +{ + return single_open(file, acpi_ac_seq_show, PDE_DATA(inode)); +} + +static int acpi_ac_add_fs(struct acpi_ac *ac) +{ + struct proc_dir_entry *entry = NULL; + + printk(KERN_WARNING PREFIX "Deprecated procfs I/F for AC is loaded," + " please retry with CONFIG_ACPI_PROCFS_POWER cleared\n"); + if (!acpi_device_dir(ac->device)) { + acpi_device_dir(ac->device) = + proc_mkdir(acpi_device_bid(ac->device), acpi_ac_dir); + if (!acpi_device_dir(ac->device)) + return -ENODEV; + } + + /* 'state' [R] */ + entry = proc_create_data(ACPI_AC_FILE_STATE, + S_IRUGO, acpi_device_dir(ac->device), + &acpi_ac_fops, ac); + if (!entry) + return -ENODEV; + return 0; +} + +static int acpi_ac_remove_fs(struct acpi_ac *ac) +{ + + if (acpi_device_dir(ac->device)) { + remove_proc_entry(ACPI_AC_FILE_STATE, + acpi_device_dir(ac->device)); + remove_proc_entry(acpi_device_bid(ac->device), acpi_ac_dir); + acpi_device_dir(ac->device) = NULL; + } + + return 0; +} +#endif + /* -------------------------------------------------------------------------- Driver Model -------------------------------------------------------------------------- */ @@ -243,6 +342,11 @@ static int acpi_ac_add(struct acpi_device *device) goto end; ac->charger.name = acpi_device_bid(device); +#ifdef CONFIG_ACPI_PROCFS_POWER + result = acpi_ac_add_fs(ac); + if (result) + goto end; +#endif ac->charger.type = POWER_SUPPLY_TYPE_MAINS; ac->charger.properties = ac_props; ac->charger.num_properties = ARRAY_SIZE(ac_props); @@ -258,8 +362,12 @@ static int acpi_ac_add(struct acpi_device *device) ac->battery_nb.notifier_call = acpi_ac_battery_notify; register_acpi_notifier(&ac->battery_nb); end: - if (result) + if (result) { +#ifdef CONFIG_ACPI_PROCFS_POWER + acpi_ac_remove_fs(ac); +#endif kfree(ac); + } dmi_check_system(ac_dmi_table); return result; @@ -303,6 +411,10 @@ static int acpi_ac_remove(struct acpi_device *device) power_supply_unregister(&ac->charger); unregister_acpi_notifier(&ac->battery_nb); +#ifdef CONFIG_ACPI_PROCFS_POWER + acpi_ac_remove_fs(ac); +#endif + kfree(ac); return 0; @@ -315,9 +427,20 @@ static int __init acpi_ac_init(void) if (acpi_disabled) return -ENODEV; +#ifdef CONFIG_ACPI_PROCFS_POWER + acpi_ac_dir = acpi_lock_ac_dir(); + if (!acpi_ac_dir) + return -ENODEV; +#endif + + result = acpi_bus_register_driver(&acpi_ac_driver); - if (result < 0) + if (result < 0) { +#ifdef CONFIG_ACPI_PROCFS_POWER + acpi_unlock_ac_dir(acpi_ac_dir); +#endif return -ENODEV; + } return 0; } @@ -325,6 +448,9 @@ static int __init acpi_ac_init(void) static void __exit acpi_ac_exit(void) { acpi_bus_unregister_driver(&acpi_ac_driver); +#ifdef CONFIG_ACPI_PROCFS_POWER + acpi_unlock_ac_dir(acpi_ac_dir); +#endif } module_init(acpi_ac_init); module_exit(acpi_ac_exit); -- cgit v1.2.3 From c16ed06024a6e699c332831dd50d8276744e3de8 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Fri, 20 Jun 2014 07:27:58 -0700 Subject: intel_pstate: Fix setting VID Commit 21855ff5 (intel_pstate: Set turbo VID for BayTrail) introduced setting the turbo VID which is required to prevent a machine check on some Baytrail SKUs under heavy graphics based workloads. The docmumentation update that brought the requirement to light also changed the bit mask used for enumerating P state and VID values from 0x7f to 0x3f. This change returns the mask value to 0x7f. Tested with the Intel NUC DN2820FYK, BIOS version FYBYT10H.86A.0034.2014.0513.1413 with v3.16-rc1 and v3.14.8 kernel versions. Fixes: 21855ff5 (intel_pstate: Set turbo VID for BayTrail) Link: https://bugzilla.kernel.org/show_bug.cgi?id=77951 Reported-and-tested-by: Rune Reterson Reported-and-tested-by: Eric Eickmeyer Cc: 3.13+ # 3.13+ Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 924bb2d42b1c..74376d615eca 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -357,21 +357,21 @@ static int byt_get_min_pstate(void) { u64 value; rdmsrl(BYT_RATIOS, value); - return (value >> 8) & 0x3F; + return (value >> 8) & 0x7F; } static int byt_get_max_pstate(void) { u64 value; rdmsrl(BYT_RATIOS, value); - return (value >> 16) & 0x3F; + return (value >> 16) & 0x7F; } static int byt_get_turbo_pstate(void) { u64 value; rdmsrl(BYT_TURBO_RATIOS, value); - return value & 0x3F; + return value & 0x7F; } static void byt_set_pstate(struct cpudata *cpudata, int pstate) @@ -405,8 +405,8 @@ static void byt_get_vid(struct cpudata *cpudata) rdmsrl(BYT_VIDS, value); - cpudata->vid.min = int_tofp((value >> 8) & 0x3f); - cpudata->vid.max = int_tofp((value >> 16) & 0x3f); + cpudata->vid.min = int_tofp((value >> 8) & 0x7f); + cpudata->vid.max = int_tofp((value >> 16) & 0x7f); cpudata->vid.ratio = div_fp( cpudata->vid.max - cpudata->vid.min, int_tofp(cpudata->pstate.max_pstate - -- cgit v1.2.3 From dd5fbf70f96dbfd7ee432096a1f979b2b3267856 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Fri, 20 Jun 2014 07:27:59 -0700 Subject: intel_pstate: don't touch turbo bit if turbo disabled or unavailable. If turbo is disabled in the BIOS bit 38 should be set in MSR_IA32_MISC_ENABLE register per section 14.3.2.1 of the SDM Vol 3 document 325384-050US Feb 2014. If this bit is set do *not* attempt to disable trubo via the MSR_IA32_PERF_CTL register. On some systems trying to disable turbo via MSR_IA32_PERF_CTL will cause subsequent writes to MSR_IA32_PERF_CTL not take affect, in fact reading MSR_IA32_PERF_CTL will not show the IDA/Turbo DISENGAGE bit(32) as set. A write of bit 32 to zero returns to normal operation. Also deal with the case where the processor does not support turbo and the BIOS does not report the fact in MSR_IA32_MISC_ENABLE but does report the max and turbo P states as the same value. Link: https://bugzilla.kernel.org/show_bug.cgi?id=64251 Cc: 3.13+ # 3.13+ Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 74376d615eca..127ead814619 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -128,6 +128,7 @@ static struct pstate_funcs pstate_funcs; struct perf_limits { int no_turbo; + int turbo_disabled; int max_perf_pct; int min_perf_pct; int32_t max_perf; @@ -287,7 +288,10 @@ static ssize_t store_no_turbo(struct kobject *a, struct attribute *b, if (ret != 1) return -EINVAL; limits.no_turbo = clamp_t(int, input, 0 , 1); - + if (limits.turbo_disabled) { + pr_warn("Turbo disabled by BIOS or unavailable on processor\n"); + limits.no_turbo = limits.turbo_disabled; + } return count; } @@ -381,7 +385,7 @@ static void byt_set_pstate(struct cpudata *cpudata, int pstate) u32 vid; val = pstate << 8; - if (limits.no_turbo) + if (limits.no_turbo && !limits.turbo_disabled) val |= (u64)1 << 32; vid_fp = cpudata->vid.min + mul_fp( @@ -448,7 +452,7 @@ static void core_set_pstate(struct cpudata *cpudata, int pstate) u64 val; val = pstate << 8; - if (limits.no_turbo) + if (limits.no_turbo && !limits.turbo_disabled) val |= (u64)1 << 32; wrmsrl_on_cpu(cpudata->cpu, MSR_IA32_PERF_CTL, val); @@ -741,7 +745,7 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy) limits.min_perf = int_tofp(1); limits.max_perf_pct = 100; limits.max_perf = int_tofp(1); - limits.no_turbo = 0; + limits.no_turbo = limits.turbo_disabled; return 0; } limits.min_perf_pct = (policy->min * 100) / policy->cpuinfo.max_freq; @@ -784,6 +788,7 @@ static int intel_pstate_cpu_init(struct cpufreq_policy *policy) { struct cpudata *cpu; int rc; + u64 misc_en; rc = intel_pstate_init_cpu(policy->cpu); if (rc) @@ -791,8 +796,13 @@ static int intel_pstate_cpu_init(struct cpufreq_policy *policy) cpu = all_cpu_data[policy->cpu]; - if (!limits.no_turbo && - limits.min_perf_pct == 100 && limits.max_perf_pct == 100) + rdmsrl(MSR_IA32_MISC_ENABLE, misc_en); + if (misc_en & MSR_IA32_MISC_ENABLE_TURBO_DISABLE || + cpu->pstate.max_pstate == cpu->pstate.turbo_pstate) { + limits.turbo_disabled = 1; + limits.no_turbo = 1; + } + if (limits.min_perf_pct == 100 && limits.max_perf_pct == 100) policy->policy = CPUFREQ_POLICY_PERFORMANCE; else policy->policy = CPUFREQ_POLICY_POWERSAVE; -- cgit v1.2.3 From 41629a8233470325bfbb60377f555f9e8acc879f Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Fri, 20 Jun 2014 07:28:00 -0700 Subject: intel_pstate: Update documentation of {max,min}_perf_pct sysfs files Update documentation to make the interpretation of the values clearer Link: https://bugzilla.kernel.org/show_bug.cgi?id=64251 Cc: 3.13+ # 3.13+ Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- Documentation/cpu-freq/intel-pstate.txt | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/Documentation/cpu-freq/intel-pstate.txt b/Documentation/cpu-freq/intel-pstate.txt index e742d21dbd96..a69ffe1d54d5 100644 --- a/Documentation/cpu-freq/intel-pstate.txt +++ b/Documentation/cpu-freq/intel-pstate.txt @@ -15,10 +15,13 @@ New sysfs files for controlling P state selection have been added to /sys/devices/system/cpu/intel_pstate/ max_perf_pct: limits the maximum P state that will be requested by - the driver stated as a percentage of the available performance. + the driver stated as a percentage of the available performance. The + available (P states) performance may be reduced by the no_turbo + setting described below. min_perf_pct: limits the minimum P state that will be requested by - the driver stated as a percentage of the available performance. + the driver stated as a percentage of the max (non-turbo) + performance level. no_turbo: limits the driver to selecting P states below the turbo frequency range. -- cgit v1.2.3 From 179e8471673ce0249cd4ecda796008f7757e5bad Mon Sep 17 00:00:00 2001 From: Vincent Minet Date: Sat, 5 Jul 2014 01:51:33 +0200 Subject: intel_pstate: Set CPU number before accessing MSRs Ensure that cpu->cpu is set before writing MSR_IA32_PERF_CTL during CPU initialization. Otherwise only cpu0 has its P-state set and all other cores are left with their values unchanged. In most cases, this is not too serious because the P-states will be set correctly when the timer function is run. But when the default governor is set to performance, the per-CPU current_pstate stays the same forever and no attempts are made to write the MSRs again. Signed-off-by: Vincent Minet Cc: All applicable Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 127ead814619..86631cb6f7de 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -700,9 +700,8 @@ static int intel_pstate_init_cpu(unsigned int cpunum) cpu = all_cpu_data[cpunum]; - intel_pstate_get_cpu_pstates(cpu); - cpu->cpu = cpunum; + intel_pstate_get_cpu_pstates(cpu); init_timer_deferrable(&cpu->timer); cpu->timer.function = intel_pstate_timer_func; -- cgit v1.2.3 From a55c072dfe520f8fa03cf11b07b9268a8a17820a Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Fri, 13 Jun 2014 13:11:51 +0200 Subject: efi/arm64: efistub: remove local copy of linux_banner The shared efistub code for ARM and arm64 contains a local copy of linux_banner, allowing it to be referenced from separate executables such as the ARM decompressor. However, this introduces a dependency on generated header files, causing unnecessary rebuilds of the stub itself and, in case of arm64, vmlinux which contains it. On arm64, the copy is not actually needed since we can reference the original symbol directly, and as it turns out, there may be better ways to deal with this for ARM as well, so let's remove it from the shared code. If it still needs to be reintroduced for ARM later, it should live under arch/arm anyway and not in shared code. Signed-off-by: Ard Biesheuvel Acked-by: Will Deacon Signed-off-by: Matt Fleming --- arch/arm64/kernel/efi-stub.c | 2 -- drivers/firmware/efi/fdt.c | 10 ---------- 2 files changed, 12 deletions(-) diff --git a/arch/arm64/kernel/efi-stub.c b/arch/arm64/kernel/efi-stub.c index 60e98a639ac5..e786e6cdc400 100644 --- a/arch/arm64/kernel/efi-stub.c +++ b/arch/arm64/kernel/efi-stub.c @@ -12,8 +12,6 @@ #include #include #include -#include -#include /* * AArch64 requires the DTB to be 8-byte aligned in the first 512MiB from diff --git a/drivers/firmware/efi/fdt.c b/drivers/firmware/efi/fdt.c index 82d774161cc9..507a3df46a5d 100644 --- a/drivers/firmware/efi/fdt.c +++ b/drivers/firmware/efi/fdt.c @@ -23,16 +23,6 @@ static efi_status_t update_fdt(efi_system_table_t *sys_table, void *orig_fdt, u32 fdt_val32; u64 fdt_val64; - /* - * Copy definition of linux_banner here. Since this code is - * built as part of the decompressor for ARM v7, pulling - * in version.c where linux_banner is defined for the - * kernel brings other kernel dependencies with it. - */ - const char linux_banner[] = - "Linux version " UTS_RELEASE " (" LINUX_COMPILE_BY "@" - LINUX_COMPILE_HOST ") (" LINUX_COMPILER ") " UTS_VERSION "\n"; - /* Do some checks on provided FDT, if it exists*/ if (orig_fdt) { if (fdt_check_header(orig_fdt)) { -- cgit v1.2.3 From 2a58b4f88e3e51619916e9d090cbd1bb8d12b632 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Wed, 7 May 2014 13:38:00 +0100 Subject: iio:tcs3472: Check for buffer enabled and locking Signed-off-by: Peter Meerwald Signed-off-by: Jonathan Cameron --- drivers/iio/light/tcs3472.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/iio/light/tcs3472.c b/drivers/iio/light/tcs3472.c index fe063a0a21cd..752569985d1d 100644 --- a/drivers/iio/light/tcs3472.c +++ b/drivers/iio/light/tcs3472.c @@ -52,6 +52,7 @@ struct tcs3472_data { struct i2c_client *client; + struct mutex lock; u8 enable; u8 control; u8 atime; @@ -116,10 +117,17 @@ static int tcs3472_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: + if (iio_buffer_enabled(indio_dev)) + return -EBUSY; + + mutex_lock(&data->lock); ret = tcs3472_req_data(data); - if (ret < 0) + if (ret < 0) { + mutex_unlock(&data->lock); return ret; + } ret = i2c_smbus_read_word_data(data->client, chan->address); + mutex_unlock(&data->lock); if (ret < 0) return ret; *val = ret; @@ -255,6 +263,7 @@ static int tcs3472_probe(struct i2c_client *client, data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); data->client = client; + mutex_init(&data->lock); indio_dev->dev.parent = &client->dev; indio_dev->info = &tcs3472_info; -- cgit v1.2.3 From b9326057a3d8447f5d2e74a7b521ccf21add2ec0 Mon Sep 17 00:00:00 2001 From: Andras Kovacs Date: Fri, 27 Jun 2014 14:50:11 +0200 Subject: USB: cp210x: add support for Corsair usb dongle Corsair USB Dongles are shipped with Corsair AXi series PSUs. These are cp210x serial usb devices, so make driver detect these. I have a program, that can get information from these PSUs. Tested with 2 different dongles shipped with Corsair AX860i and AX1200i units. Signed-off-by: Andras Kovacs Cc: Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 762e4a5f5ae9..330df5ce435b 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -153,6 +153,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ + { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */ { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */ { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */ -- cgit v1.2.3 From d033f48f3a4a9279c7475891fbb060d4881c22da Mon Sep 17 00:00:00 2001 From: Varun Sethi Date: Tue, 24 Jun 2014 19:27:15 +0530 Subject: iommu/fsl: Fix PAMU window size check. is_power_of_2 requires an unsigned long parameter which would lead to truncation of 64 bit values on 32 bit architectures. __ffs also expects an unsigned long parameter thus won't work for 64 bit values on 32 bit architectures. Signed-off-by: Varun Sethi Tested-by: Emil Medve Signed-off-by: Joerg Roedel --- drivers/iommu/fsl_pamu.c | 8 ++++---- drivers/iommu/fsl_pamu_domain.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c index b99dd88e31b9..bb446d742a2d 100644 --- a/drivers/iommu/fsl_pamu.c +++ b/drivers/iommu/fsl_pamu.c @@ -170,10 +170,10 @@ int pamu_disable_liodn(int liodn) static unsigned int map_addrspace_size_to_wse(phys_addr_t addrspace_size) { /* Bug if not a power of 2 */ - BUG_ON(!is_power_of_2(addrspace_size)); + BUG_ON((addrspace_size & (addrspace_size - 1))); /* window size is 2^(WSE+1) bytes */ - return __ffs(addrspace_size) - 1; + return fls64(addrspace_size) - 2; } /* Derive the PAACE window count encoding for the subwindow count */ @@ -351,7 +351,7 @@ int pamu_config_ppaace(int liodn, phys_addr_t win_addr, phys_addr_t win_size, struct paace *ppaace; unsigned long fspi; - if (!is_power_of_2(win_size) || win_size < PAMU_PAGE_SIZE) { + if ((win_size & (win_size - 1)) || win_size < PAMU_PAGE_SIZE) { pr_debug("window size too small or not a power of two %llx\n", win_size); return -EINVAL; } @@ -464,7 +464,7 @@ int pamu_config_spaace(int liodn, u32 subwin_cnt, u32 subwin, return -ENOENT; } - if (!is_power_of_2(subwin_size) || subwin_size < PAMU_PAGE_SIZE) { + if ((subwin_size & (subwin_size - 1)) || subwin_size < PAMU_PAGE_SIZE) { pr_debug("subwindow size out of range, or not a power of 2\n"); return -EINVAL; } diff --git a/drivers/iommu/fsl_pamu_domain.c b/drivers/iommu/fsl_pamu_domain.c index 93072ba44b1d..3dd0b8edd429 100644 --- a/drivers/iommu/fsl_pamu_domain.c +++ b/drivers/iommu/fsl_pamu_domain.c @@ -301,7 +301,7 @@ static int check_size(u64 size, dma_addr_t iova) * Size must be a power of two and at least be equal * to PAMU page size. */ - if (!is_power_of_2(size) || size < PAMU_PAGE_SIZE) { + if ((size & (size - 1)) || size < PAMU_PAGE_SIZE) { pr_debug("%s: size too small or not a power of two\n", __func__); return -EINVAL; } -- cgit v1.2.3 From 75f0e4615dc328e67634eccd86bc71597da9f8a3 Mon Sep 17 00:00:00 2001 From: Varun Sethi Date: Tue, 24 Jun 2014 19:27:16 +0530 Subject: iommu/fsl: Fix the device domain attach condition. Store the domain information for the device, only if it's not already attached to a domain. Signed-off-by: Varun Sethi Signed-off-by: Joerg Roedel --- drivers/iommu/fsl_pamu_domain.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/iommu/fsl_pamu_domain.c b/drivers/iommu/fsl_pamu_domain.c index 3dd0b8edd429..54060d16dec8 100644 --- a/drivers/iommu/fsl_pamu_domain.c +++ b/drivers/iommu/fsl_pamu_domain.c @@ -335,11 +335,6 @@ static struct fsl_dma_domain *iommu_alloc_dma_domain(void) return domain; } -static inline struct device_domain_info *find_domain(struct device *dev) -{ - return dev->archdata.iommu_domain; -} - static void remove_device_ref(struct device_domain_info *info, u32 win_cnt) { unsigned long flags; @@ -380,7 +375,7 @@ static void attach_device(struct fsl_dma_domain *dma_domain, int liodn, struct d * Check here if the device is already attached to domain or not. * If the device is already attached to a domain detach it. */ - old_domain_info = find_domain(dev); + old_domain_info = dev->archdata.iommu_domain; if (old_domain_info && old_domain_info->domain != dma_domain) { spin_unlock_irqrestore(&device_domain_lock, flags); detach_device(dev, old_domain_info->domain); @@ -399,7 +394,7 @@ static void attach_device(struct fsl_dma_domain *dma_domain, int liodn, struct d * the info for the first LIODN as all * LIODNs share the same domain */ - if (!old_domain_info) + if (!dev->archdata.iommu_domain) dev->archdata.iommu_domain = info; spin_unlock_irqrestore(&device_domain_lock, flags); -- cgit v1.2.3 From 3170447c1f264d51b8d1f3898bf2588588a64fdc Mon Sep 17 00:00:00 2001 From: Varun Sethi Date: Tue, 24 Jun 2014 19:27:17 +0530 Subject: iommu/fsl: Fix the error condition during iommu group Earlier PTR_ERR was being returned even if group was set to null. Now, we explicitly set an ERR_PTR value in case the group pointer is NULL. Signed-off-by: Varun Sethi Signed-off-by: Joerg Roedel --- drivers/iommu/fsl_pamu_domain.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/iommu/fsl_pamu_domain.c b/drivers/iommu/fsl_pamu_domain.c index 54060d16dec8..af47648301a9 100644 --- a/drivers/iommu/fsl_pamu_domain.c +++ b/drivers/iommu/fsl_pamu_domain.c @@ -1037,12 +1037,15 @@ root_bus: group = get_shared_pci_device_group(pdev); } + if (!group) + group = ERR_PTR(-ENODEV); + return group; } static int fsl_pamu_add_device(struct device *dev) { - struct iommu_group *group = NULL; + struct iommu_group *group = ERR_PTR(-ENODEV); struct pci_dev *pdev; const u32 *prop; int ret, len; @@ -1065,7 +1068,7 @@ static int fsl_pamu_add_device(struct device *dev) group = get_device_iommu_group(dev); } - if (!group || IS_ERR(group)) + if (IS_ERR(group)) return PTR_ERR(group); ret = iommu_group_add_device(group, dev); -- cgit v1.2.3 From 3d28bd840b2d3981cd28caf5fe1df38f1344dd60 Mon Sep 17 00:00:00 2001 From: Bernd Wachter Date: Wed, 2 Jul 2014 12:36:48 +0300 Subject: usb: option: Add ID for Telewell TW-LTE 4G v2 Add ID of the Telewell 4G v2 hardware to option driver to get legacy serial interface working Signed-off-by: Bernd Wachter Cc: Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index ac73f49cd9f0..a9688940543d 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1487,6 +1487,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff), /* ZTE MF91 */ .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G v2 */ + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) }, -- cgit v1.2.3 From 66b42b78bc1e816f92b662e8888c89195e4199e1 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Sun, 15 Jun 2014 08:41:17 +0800 Subject: ACPI / EC: Avoid race condition related to advance_transaction() The advance_transaction() will be invoked from the IRQ context GPE handler and the task context ec_poll(). The handling of this function is locked so that the EC state machine are ensured to be advanced sequentially. But there is a problem. Before invoking advance_transaction(), EC_SC(R) is read. Then for advance_transaction(), there could be race condition around the lock from both contexts. The first one reading the register could fail this race and when it passes the stale register value to the state machine advancement code, the hardware condition is totally different from when the register is read. And the hardware accesses determined from the wrong hardware status can break the EC state machine. And there could be cases that the functionalities of the platform firmware are seriously affected. For example: 1. When 2 EC_DATA(W) writes compete the IBF=0, the 2nd EC_DATA(W) write may be invalid due to IBF=1 after the 1st EC_DATA(W) write. Then the hardware will either refuse to respond a next EC_SC(W) write of the next command or discard the current WR_EC command when it receives a EC_SC(W) write of the next command. 2. When 1 EC_SC(W) write and 1 EC_DATA(W) write compete the IBF=0, the EC_DATA(W) write may be invalid due to IBF=1 after the EC_SC(W) write. The next EC_DATA(R) could never be responded by the hardware. This is the root cause of the reported issue. Fix this issue by moving the EC_SC(R) access into the lock so that we can ensure that the state machine is advanced consistently. Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891 Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931 Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911 Reported-and-tested-by: Gareth Williams Reported-and-tested-by: Hans de Goede Reported-by: Barton Xu Tested-by: Steffen Weber Tested-by: Arthur Chen Signed-off-by: Lv Zheng Cc: All applicable Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index ad11ba4a412d..762b4cc9d7b1 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -168,12 +168,15 @@ static void start_transaction(struct acpi_ec *ec) acpi_ec_write_cmd(ec, ec->curr->command); } -static void advance_transaction(struct acpi_ec *ec, u8 status) +static void advance_transaction(struct acpi_ec *ec) { unsigned long flags; struct transaction *t; + u8 status; spin_lock_irqsave(&ec->lock, flags); + pr_debug("===== %s =====\n", in_interrupt() ? "IRQ" : "TASK"); + status = acpi_ec_read_status(ec); t = ec->curr; if (!t) goto unlock; @@ -236,7 +239,7 @@ static int ec_poll(struct acpi_ec *ec) msecs_to_jiffies(1))) return 0; } - advance_transaction(ec, acpi_ec_read_status(ec)); + advance_transaction(ec); } while (time_before(jiffies, delay)); pr_debug("controller reset, restart transaction\n"); spin_lock_irqsave(&ec->lock, flags); @@ -635,11 +638,8 @@ static u32 acpi_ec_gpe_handler(acpi_handle gpe_device, u32 gpe_number, void *data) { struct acpi_ec *ec = data; - u8 status = acpi_ec_read_status(ec); - - pr_debug("~~~> interrupt, status:0x%02x\n", status); - advance_transaction(ec, status); + advance_transaction(ec); if (ec_transaction_done(ec) && (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) { wake_up(&ec->wait); -- cgit v1.2.3 From f92fca0060fc4dc9227342d0072d75df98c1e5a5 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Sun, 15 Jun 2014 08:41:35 +0800 Subject: ACPI / EC: Add asynchronous command byte write support Move the first command byte write into advance_transaction() so that all EC register accesses that can affect the command processing state machine can happen in this asynchronous state machine advancement function. The advance_transaction() function then can be a complete implementation of an asyncrhonous transaction for a single command so that: 1. The first command byte can be written in the interrupt context; 2. The command completion waiter can also be used to wait the first command byte's timeout; 3. In BURST mode, the follow-up command bytes can be written in the interrupt context directly, so that it doesn't need to return to the task context. Returning to the task context reduces the throughput of the BURST mode and in the worst cases where the system workload is very high, this leads to the hardware driven automatic BURST mode exit. In order not to increase memory consumption, convert 'done' into 'flags' to contain multiple indications: 1. ACPI_EC_COMMAND_COMPLETE: converting from original 'done' condition, indicating the completion of the command transaction. 2. ACPI_EC_COMMAND_POLL: indicating the availability of writing the first command byte. A new command can utilize this flag to compete for the right of accessing the underlying hardware. There is a follow-up bug fix that has utilized this new flag. The 2 flags are important because it also reflects a key concept of IO programs' design used in the system softwares. Normally an IO program running in the kernel should first be implemented in the asynchronous way. And the 2 flags are the most common way to implement its synchronous operations on top of the asynchronous operations: 1. POLL: This flag can be used to block until the asynchronous operations can happen. 2. COMPLETE: This flag can be used to block until the asynchronous operations have completed. By constructing code cleanly in this way, many difficult problems can be solved smoothly. Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891 Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931 Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911 Reported-and-tested-by: Gareth Williams Reported-and-tested-by: Hans de Goede Reported-by: Barton Xu Tested-by: Steffen Weber Tested-by: Arthur Chen Signed-off-by: Lv Zheng Cc: All applicable Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 83 ++++++++++++++++++++++++++++++++----------------------- 1 file changed, 48 insertions(+), 35 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 762b4cc9d7b1..f09386e9745f 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -78,6 +78,9 @@ enum { EC_FLAGS_BLOCKED, /* Transactions are blocked */ }; +#define ACPI_EC_COMMAND_POLL 0x01 /* Available for command byte */ +#define ACPI_EC_COMMAND_COMPLETE 0x02 /* Completed last byte */ + /* ec.c is compiled in acpi namespace so this shows up as acpi.ec_delay param */ static unsigned int ec_delay __read_mostly = ACPI_EC_DELAY; module_param(ec_delay, uint, 0644); @@ -109,7 +112,7 @@ struct transaction { u8 ri; u8 wlen; u8 rlen; - bool done; + u8 flags; }; struct acpi_ec *boot_ec, *first_ec; @@ -150,63 +153,68 @@ static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data) outb(data, ec->data_addr); } -static int ec_transaction_done(struct acpi_ec *ec) +static int ec_transaction_completed(struct acpi_ec *ec) { unsigned long flags; int ret = 0; spin_lock_irqsave(&ec->lock, flags); - if (!ec->curr || ec->curr->done) + if (!ec->curr || (ec->curr->flags & ACPI_EC_COMMAND_COMPLETE)) ret = 1; spin_unlock_irqrestore(&ec->lock, flags); return ret; } -static void start_transaction(struct acpi_ec *ec) -{ - ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0; - ec->curr->done = false; - acpi_ec_write_cmd(ec, ec->curr->command); -} - static void advance_transaction(struct acpi_ec *ec) { - unsigned long flags; struct transaction *t; u8 status; - spin_lock_irqsave(&ec->lock, flags); pr_debug("===== %s =====\n", in_interrupt() ? "IRQ" : "TASK"); status = acpi_ec_read_status(ec); t = ec->curr; if (!t) - goto unlock; - if (t->wlen > t->wi) { - if ((status & ACPI_EC_FLAG_IBF) == 0) - acpi_ec_write_data(ec, - t->wdata[t->wi++]); - else - goto err; - } else if (t->rlen > t->ri) { - if ((status & ACPI_EC_FLAG_OBF) == 1) { - t->rdata[t->ri++] = acpi_ec_read_data(ec); - if (t->rlen == t->ri) - t->done = true; + goto err; + if (t->flags & ACPI_EC_COMMAND_POLL) { + if (t->wlen > t->wi) { + if ((status & ACPI_EC_FLAG_IBF) == 0) + acpi_ec_write_data(ec, t->wdata[t->wi++]); + else + goto err; + } else if (t->rlen > t->ri) { + if ((status & ACPI_EC_FLAG_OBF) == 1) { + t->rdata[t->ri++] = acpi_ec_read_data(ec); + if (t->rlen == t->ri) + t->flags |= ACPI_EC_COMMAND_COMPLETE; + } else + goto err; + } else if (t->wlen == t->wi && + (status & ACPI_EC_FLAG_IBF) == 0) + t->flags |= ACPI_EC_COMMAND_COMPLETE; + return; + } else { + if ((status & ACPI_EC_FLAG_IBF) == 0) { + acpi_ec_write_cmd(ec, t->command); + t->flags |= ACPI_EC_COMMAND_POLL; } else goto err; - } else if (t->wlen == t->wi && - (status & ACPI_EC_FLAG_IBF) == 0) - t->done = true; - goto unlock; + return; + } err: /* * If SCI bit is set, then don't think it's a false IRQ * otherwise will take a not handled IRQ as a false one. */ - if (in_interrupt() && !(status & ACPI_EC_FLAG_SCI)) - ++t->irq_count; + if (!(status & ACPI_EC_FLAG_SCI)) { + if (in_interrupt() && t) + ++t->irq_count; + } +} -unlock: - spin_unlock_irqrestore(&ec->lock, flags); +static void start_transaction(struct acpi_ec *ec) +{ + ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0; + ec->curr->flags = 0; + advance_transaction(ec); } static int acpi_ec_sync_query(struct acpi_ec *ec, u8 *data); @@ -231,15 +239,17 @@ static int ec_poll(struct acpi_ec *ec) /* don't sleep with disabled interrupts */ if (EC_FLAGS_MSI || irqs_disabled()) { udelay(ACPI_EC_MSI_UDELAY); - if (ec_transaction_done(ec)) + if (ec_transaction_completed(ec)) return 0; } else { if (wait_event_timeout(ec->wait, - ec_transaction_done(ec), + ec_transaction_completed(ec), msecs_to_jiffies(1))) return 0; } + spin_lock_irqsave(&ec->lock, flags); advance_transaction(ec); + spin_unlock_irqrestore(&ec->lock, flags); } while (time_before(jiffies, delay)); pr_debug("controller reset, restart transaction\n"); spin_lock_irqsave(&ec->lock, flags); @@ -637,10 +647,13 @@ static int ec_check_sci(struct acpi_ec *ec, u8 state) static u32 acpi_ec_gpe_handler(acpi_handle gpe_device, u32 gpe_number, void *data) { + unsigned long flags; struct acpi_ec *ec = data; + spin_lock_irqsave(&ec->lock, flags); advance_transaction(ec); - if (ec_transaction_done(ec) && + spin_unlock_irqrestore(&ec->lock, flags); + if (ec_transaction_completed(ec) && (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) { wake_up(&ec->wait); ec_check_sci(ec, acpi_ec_read_status(ec)); -- cgit v1.2.3 From 9b80f0f73ae1583c22325ede341c74195847618c Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Sun, 15 Jun 2014 08:41:48 +0800 Subject: ACPI / EC: Remove duplicated ec_wait_ibf0() waiter After we've added the first command byte write into advance_transaction(), the IBF=0 waiter is duplicated with the command completion waiter implemented in the ec_poll() because: If IBF=1 blocked the first command byte write invoked in the task context ec_poll(), it would be kicked off upon IBF=0 interrupt or timed out and retried again in the task context. Remove this seperate and duplicate IBF=0 waiter. By doing so we can reduce the overall number of times to access the EC_SC(R) status register. Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891 Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931 Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911 Reported-and-tested-by: Gareth Williams Reported-and-tested-by: Hans de Goede Reported-by: Barton Xu Tested-by: Steffen Weber Tested-by: Arthur Chen Signed-off-by: Lv Zheng Cc: All applicable Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 27 +-------------------------- 1 file changed, 1 insertion(+), 26 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index f09386e9745f..d016ea31b8e9 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -281,23 +281,6 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, return ret; } -static int ec_check_ibf0(struct acpi_ec *ec) -{ - u8 status = acpi_ec_read_status(ec); - return (status & ACPI_EC_FLAG_IBF) == 0; -} - -static int ec_wait_ibf0(struct acpi_ec *ec) -{ - unsigned long delay = jiffies + msecs_to_jiffies(ec_delay); - /* interrupt wait manually if GPE mode is not active */ - while (time_before(jiffies, delay)) - if (wait_event_timeout(ec->wait, ec_check_ibf0(ec), - msecs_to_jiffies(1))) - return 0; - return -ETIME; -} - static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) { int status; @@ -318,12 +301,6 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) goto unlock; } } - if (ec_wait_ibf0(ec)) { - pr_err("input buffer is not empty, " - "aborting transaction\n"); - status = -ETIME; - goto end; - } pr_debug("transaction start (cmd=0x%02x, addr=0x%02x)\n", t->command, t->wdata ? t->wdata[0] : 0); /* disable GPE during transaction if storm is detected */ @@ -347,7 +324,6 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) set_bit(EC_FLAGS_GPE_STORM, &ec->flags); } pr_debug("transaction end\n"); -end: if (ec->global_lock) acpi_release_global_lock(glk); unlock: @@ -653,8 +629,7 @@ static u32 acpi_ec_gpe_handler(acpi_handle gpe_device, spin_lock_irqsave(&ec->lock, flags); advance_transaction(ec); spin_unlock_irqrestore(&ec->lock, flags); - if (ec_transaction_completed(ec) && - (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) { + if (ec_transaction_completed(ec)) { wake_up(&ec->wait); ec_check_sci(ec, acpi_ec_read_status(ec)); } -- cgit v1.2.3 From c0d653412fc8450370167a3268b78fc772ff9c87 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Sun, 15 Jun 2014 08:42:07 +0800 Subject: ACPI / EC: Fix race condition in ec_transaction_completed() There is a race condition in ec_transaction_completed(). When ec_transaction_completed() is called in the GPE handler, it could return true because of (ec->curr == NULL). Then the wake_up() invocation could complete the next command unexpectedly since there is no lock between the 2 invocations. With the previous cleanup, the IBF=0 waiter race need not be handled any more. It's now safe to return a flag from advance_condition() to indicate the requirement of wakeup, the flag is returned from a locked context. The ec_transaction_completed() is now only invoked by the ec_poll() where the ec->curr is ensured to be different from NULL. After cleaning up, the EVT_SCI=1 check should be moved out of the wakeup condition so that an EVT_SCI raised with (ec->curr == NULL) can trigger a QR_SC command. Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891 Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931 Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911 Reported-and-tested-by: Gareth Williams Reported-and-tested-by: Hans de Goede Reported-by: Barton Xu Tested-by: Steffen Weber Tested-by: Arthur Chen Signed-off-by: Lv Zheng Cc: All applicable Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index d016ea31b8e9..49d89909b4ed 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -158,16 +158,17 @@ static int ec_transaction_completed(struct acpi_ec *ec) unsigned long flags; int ret = 0; spin_lock_irqsave(&ec->lock, flags); - if (!ec->curr || (ec->curr->flags & ACPI_EC_COMMAND_COMPLETE)) + if (ec->curr && (ec->curr->flags & ACPI_EC_COMMAND_COMPLETE)) ret = 1; spin_unlock_irqrestore(&ec->lock, flags); return ret; } -static void advance_transaction(struct acpi_ec *ec) +static bool advance_transaction(struct acpi_ec *ec) { struct transaction *t; u8 status; + bool wakeup = false; pr_debug("===== %s =====\n", in_interrupt() ? "IRQ" : "TASK"); status = acpi_ec_read_status(ec); @@ -183,21 +184,25 @@ static void advance_transaction(struct acpi_ec *ec) } else if (t->rlen > t->ri) { if ((status & ACPI_EC_FLAG_OBF) == 1) { t->rdata[t->ri++] = acpi_ec_read_data(ec); - if (t->rlen == t->ri) + if (t->rlen == t->ri) { t->flags |= ACPI_EC_COMMAND_COMPLETE; + wakeup = true; + } } else goto err; } else if (t->wlen == t->wi && - (status & ACPI_EC_FLAG_IBF) == 0) + (status & ACPI_EC_FLAG_IBF) == 0) { t->flags |= ACPI_EC_COMMAND_COMPLETE; - return; + wakeup = true; + } + return wakeup; } else { if ((status & ACPI_EC_FLAG_IBF) == 0) { acpi_ec_write_cmd(ec, t->command); t->flags |= ACPI_EC_COMMAND_POLL; } else goto err; - return; + return wakeup; } err: /* @@ -208,13 +213,14 @@ err: if (in_interrupt() && t) ++t->irq_count; } + return wakeup; } static void start_transaction(struct acpi_ec *ec) { ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0; ec->curr->flags = 0; - advance_transaction(ec); + (void)advance_transaction(ec); } static int acpi_ec_sync_query(struct acpi_ec *ec, u8 *data); @@ -248,7 +254,7 @@ static int ec_poll(struct acpi_ec *ec) return 0; } spin_lock_irqsave(&ec->lock, flags); - advance_transaction(ec); + (void)advance_transaction(ec); spin_unlock_irqrestore(&ec->lock, flags); } while (time_before(jiffies, delay)); pr_debug("controller reset, restart transaction\n"); @@ -627,12 +633,10 @@ static u32 acpi_ec_gpe_handler(acpi_handle gpe_device, struct acpi_ec *ec = data; spin_lock_irqsave(&ec->lock, flags); - advance_transaction(ec); - spin_unlock_irqrestore(&ec->lock, flags); - if (ec_transaction_completed(ec)) { + if (advance_transaction(ec)) wake_up(&ec->wait); - ec_check_sci(ec, acpi_ec_read_status(ec)); - } + spin_unlock_irqrestore(&ec->lock, flags); + ec_check_sci(ec, acpi_ec_read_status(ec)); return ACPI_INTERRUPT_HANDLED | ACPI_REENABLE_GPE; } -- cgit v1.2.3 From 4a3f6b5bf3f3293087a5f60ea3328715fe14b6de Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Sun, 15 Jun 2014 08:42:19 +0800 Subject: ACPI / EC: Update revision due to recent changes The bug fixes and asynchronous improvements have been done to the EC driver by the previous commits. This patch increases the revision to 2.2 to indicate the behavior differences between the old and the new drivers. The copyright/authorship notices are also updated. Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 49d89909b4ed..f8fb736e38df 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -1,11 +1,14 @@ /* - * ec.c - ACPI Embedded Controller Driver (v2.1) + * ec.c - ACPI Embedded Controller Driver (v2.2) * - * Copyright (C) 2006-2008 Alexey Starikovskiy - * Copyright (C) 2006 Denis Sadykov - * Copyright (C) 2004 Luming Yu - * Copyright (C) 2001, 2002 Andy Grover - * Copyright (C) 2001, 2002 Paul Diefenbaugh + * Copyright (C) 2001-2014 Intel Corporation + * Author: 2014 Lv Zheng + * 2006, 2007 Alexey Starikovskiy + * 2006 Denis Sadykov + * 2004 Luming Yu + * 2001, 2002 Andy Grover + * 2001, 2002 Paul Diefenbaugh + * Copyright (C) 2008 Alexey Starikovskiy * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * -- cgit v1.2.3 From dd43de20f540179863d9d7c3188b6a6cfde9a731 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Sun, 15 Jun 2014 08:42:42 +0800 Subject: ACPI / EC: Add detailed fields debugging support of EC_SC(R). Developers really don't need to translate EC_SC(R) in mind as long as the field details are decoded in the debugging message. Tested-by: Gareth Williams Tested-by: Steffen Weber Tested-by: Hans de Goede Tested-by: Arthur Chen Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index f8fb736e38df..ff16132e5c52 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -55,6 +55,7 @@ /* EC status register */ #define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */ #define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */ +#define ACPI_EC_FLAG_CMD 0x08 /* Input buffer contains a command */ #define ACPI_EC_FLAG_BURST 0x10 /* burst mode */ #define ACPI_EC_FLAG_SCI 0x20 /* EC-SCI occurred */ @@ -133,26 +134,33 @@ static int EC_FLAGS_CLEAR_ON_RESUME; /* Needs acpi_ec_clear() on boot/resume */ static inline u8 acpi_ec_read_status(struct acpi_ec *ec) { u8 x = inb(ec->command_addr); - pr_debug("---> status = 0x%2.2x\n", x); + pr_debug("EC_SC(R) = 0x%2.2x " + "SCI_EVT=%d BURST=%d CMD=%d IBF=%d OBF=%d\n", + x, + !!(x & ACPI_EC_FLAG_SCI), + !!(x & ACPI_EC_FLAG_BURST), + !!(x & ACPI_EC_FLAG_CMD), + !!(x & ACPI_EC_FLAG_IBF), + !!(x & ACPI_EC_FLAG_OBF)); return x; } static inline u8 acpi_ec_read_data(struct acpi_ec *ec) { u8 x = inb(ec->data_addr); - pr_debug("---> data = 0x%2.2x\n", x); + pr_debug("EC_DATA(R) = 0x%2.2x\n", x); return x; } static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command) { - pr_debug("<--- command = 0x%2.2x\n", command); + pr_debug("EC_SC(W) = 0x%2.2x\n", command); outb(command, ec->command_addr); } static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data) { - pr_debug("<--- data = 0x%2.2x\n", data); + pr_debug("EC_DATA(W) = 0x%2.2x\n", data); outb(data, ec->data_addr); } -- cgit v1.2.3 From ed4b197ddd4d7aa6623e7777ea326c67c3a6b8ed Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 3 Jul 2014 00:35:09 +0100 Subject: ACPI / EC: Free saved_ec on error exit path Smatch detected two memory leaks on saved_ec: drivers/acpi/ec.c:1070 acpi_ec_ecdt_probe() warn: possible memory leak of 'saved_ec' drivers/acpi/ec.c:1109 acpi_ec_ecdt_probe() warn: possible memory leak of 'saved_ec' Free saved_ec on these two error exit paths to stop the memory leak. Note that saved_ec maybe null, but kfree on null is allowed. Signed-off-by: Colin Ian King Acked-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index ff16132e5c52..a66ab658abbc 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -1069,8 +1069,10 @@ int __init acpi_ec_ecdt_probe(void) /* fall through */ } - if (EC_FLAGS_SKIP_DSDT_SCAN) + if (EC_FLAGS_SKIP_DSDT_SCAN) { + kfree(saved_ec); return -ENODEV; + } /* This workaround is needed only on some broken machines, * which require early EC, but fail to provide ECDT */ @@ -1108,6 +1110,7 @@ install: } error: kfree(boot_ec); + kfree(saved_ec); boot_ec = NULL; return -ENODEV; } -- cgit v1.2.3 From 75646e758a0ecbed5024454507d5be5b9ea9dcbf Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Mon, 7 Jul 2014 15:47:12 +0800 Subject: ACPI / battery: Retry to get battery information if failed during probing Some machines (eg. Lenovo Z480) ECs are not stable during boot up and causes battery driver fails to be loaded due to failure of getting battery information from EC sometimes. After several retries, the operation will work. This patch is to retry to get battery information 5 times if the first try fails. Link: https://bugzilla.kernel.org/show_bug.cgi?id=75581 Reported-and-tested-by: naszar Cc: All applicable Signed-off-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/battery.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 0d7116f34b95..bc0b286ff2ba 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #ifdef CONFIG_ACPI_PROCFS_POWER @@ -1151,6 +1152,28 @@ static struct dmi_system_id bat_dmi_table[] = { {}, }; +/* + * Some machines'(E,G Lenovo Z480) ECs are not stable + * during boot up and this causes battery driver fails to be + * probed due to failure of getting battery information + * from EC sometimes. After several retries, the operation + * may work. So add retry code here and 20ms sleep between + * every retries. + */ +static int acpi_battery_update_retry(struct acpi_battery *battery) +{ + int retry, ret; + + for (retry = 5; retry; retry--) { + ret = acpi_battery_update(battery, false); + if (!ret) + break; + + msleep(20); + } + return ret; +} + static int acpi_battery_add(struct acpi_device *device) { int result = 0; @@ -1169,9 +1192,11 @@ static int acpi_battery_add(struct acpi_device *device) mutex_init(&battery->sysfs_lock); if (acpi_has_method(battery->device->handle, "_BIX")) set_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags); - result = acpi_battery_update(battery, false); + + result = acpi_battery_update_retry(battery); if (result) goto fail; + #ifdef CONFIG_ACPI_PROCFS_POWER result = acpi_battery_add_fs(device); #endif -- cgit v1.2.3 From 7abb1a530e87fce0d73f85ac7802648bb542cf26 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 16 May 2014 17:36:09 -0500 Subject: ARM: DRA7/AM43XX: fix header definition for omap44xx_restart omap44xx_restart is defined as a static void inline when DRA7/AM437X is defined alone, which implies that the restart function is no longer functional even though it is built in. So, fix the definition of the same. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/common.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index b2d252bf4a53..dc571f1d3b8a 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -162,7 +162,8 @@ static inline void omap3xxx_restart(enum reboot_mode mode, const char *cmd) } #endif -#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX) void omap44xx_restart(enum reboot_mode mode, const char *cmd); #else static inline void omap44xx_restart(enum reboot_mode mode, const char *cmd) -- cgit v1.2.3 From e120fb459693bbc1ac3eabdd65c3659d7cfbfd2a Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 4 Jul 2014 12:55:43 +0300 Subject: ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always on After clarification from the hardware team it was found that this 1.8V PHY supply can't be switched OFF when SoC is Active. Since the PHY IPs don't contain isolation logic built in the design to allow the power rail to be switched off, there is a very high risk of IP reliability and additional leakage paths which can result in additional power consumption. The only scenario where this rail can be switched off is part of Power on reset sequencing, but it needs to be kept always-on during operation. This patch is required for proper functionality of USB, SATA and PCIe on DRA7-evm. CC: Rajendra Nayak CC: Tero Kristo Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 4adc28039c30..83089540e324 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -240,6 +240,7 @@ regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; regulator-boot-on; }; -- cgit v1.2.3 From 526570cb2067363ec93681837e43b4c774b1616c Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Tue, 24 Jun 2014 00:24:27 -0500 Subject: ARM: OMAP2+: create dsp device only on OMAP3 SoCs The DSP platform device for TI DSP/Bridge is currently created unconditionally whenever CONFIG_TIDSPBRIDGE is enabled. This device should only be created on OMAP34xx/ OMAP36xx SoCs, and not for other OMAP3 derived SoCs or when booting multi-arch images on other SoCs. So, add a check for the SoC family both before creating the device and allocating the carveout memory for the device. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/dsp.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index b8208b4b1bd9..f7492df1cbba 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -29,6 +29,7 @@ #ifdef CONFIG_TIDSPBRIDGE_DVFS #include "omap-pm.h" #endif +#include "soc.h" #include @@ -59,6 +60,9 @@ void __init omap_dsp_reserve_sdram_memblock(void) phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE; phys_addr_t paddr; + if (!cpu_is_omap34xx()) + return; + if (!size) return; @@ -83,6 +87,9 @@ static int __init omap_dsp_init(void) int err = -ENOMEM; struct omap_dsp_platform_data *pdata = &omap_dsp_pdata; + if (!cpu_is_omap34xx()) + return 0; + pdata->phys_mempool_base = omap_dsp_get_mempool_base(); if (pdata->phys_mempool_base) { @@ -115,6 +122,9 @@ module_init(omap_dsp_init); static void __exit omap_dsp_exit(void) { + if (!cpu_is_omap34xx()) + return; + platform_device_unregister(omap_dsp_pdev); } module_exit(omap_dsp_exit); -- cgit v1.2.3 From 68e2eb533ef84197d6a60d23f45070cddcf51753 Mon Sep 17 00:00:00 2001 From: Guido Martínez Date: Wed, 2 Jul 2014 10:35:18 -0300 Subject: ARM: OMAP2+: Make GPMC skip disabled devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently, child nodes of the gpmc node are iterated and probed regardless of their 'status' property. This means adding 'status = "disabled";' has no effect. This patch changes the iteration to only probe nodes marked as available. Signed-off-by: Guido Martínez Tested-by: Pekon Gupta Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 2c0c2816900f..8bc13380f0a0 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1615,7 +1615,7 @@ static int gpmc_probe_dt(struct platform_device *pdev) return ret; } - for_each_child_of_node(pdev->dev.of_node, child) { + for_each_available_child_of_node(pdev->dev.of_node, child) { if (!child->name) continue; -- cgit v1.2.3 From 90571d856a01bb2d4eaa6339bcd7c28d9cb4bc59 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 3 Jul 2014 12:51:22 +0300 Subject: ARM: dts: am335x-evm: Enable the McASP FIFO for audio The use of FIFO in McASP can reduce the risk of audio under/overrun and lowers the load on the memories since the DMA will operate in bursts. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-evm.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index ecb267767cf5..e2156a583de7 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -529,8 +529,8 @@ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 1 2 >; - tx-num-evt = <1>; - rx-num-evt = <1>; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &tps { -- cgit v1.2.3 From 6f2f52b5960d090e81db59f4682cea7463bfd7cd Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 3 Jul 2014 12:51:23 +0300 Subject: ARM: dts: am335x-evmsk: Enable the McASP FIFO for audio The use of FIFO in McASP can reduce the risk of audio under/overrun and lowers the load on the memories since the DMA will operate in bursts. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-evmsk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index ab9a34ce524c..80a3b215e7d6 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -560,8 +560,8 @@ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 1 2 >; - tx-num-evt = <1>; - rx-num-evt = <1>; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &tscadc { -- cgit v1.2.3 From 24faebd641ba75ccbbbb6d8f9131a32881e3dcd2 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Wed, 25 Jun 2014 13:42:05 +0200 Subject: ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA. As this board use external clock for RMII interface we should specify 'rmii' phy mode and 'rmii-clock-ext' to make ethernet working. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-igep0033.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 8a0a72dc7dd7..a1a0cc5eb35c 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -105,10 +105,16 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; + phy-mode = "rmii"; +}; + +&phy_sel { + rmii-clock-ext; }; &elm { -- cgit v1.2.3 From 145e74a4e5022225adb84f4e5d4fff7938475c35 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 3 Jul 2014 13:44:23 -0700 Subject: hwmon: (adm1031) Fix writes to limit registers Upper limit for write operations to temperature limit registers was clamped to a fractional value. However, limit registers do not support fractional values. As a result, upper limits of 127.5 degrees C or higher resulted in a rounded limit of 128 degrees C. Since limit registers are signed, this was stored as -128 degrees C. Clamp limits to (-55, +127) degrees C to solve the problem. Value on writes to auto_temp[12]_min and auto_temp[12]_max were not clamped at all, but masked. As a result, out-of-range writes resulted in a more or less arbitrary limit. Clamp those attributes to (0, 127) degrees C for more predictable results. Cc: Axel Lin Cc: stable@vger.kernel.org Reviewed-by: Jean Delvare Signed-off-by: Guenter Roeck --- drivers/hwmon/adm1031.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index a8a540ca8c34..51c1a5a165ab 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -365,6 +365,7 @@ set_auto_temp_min(struct device *dev, struct device_attribute *attr, if (ret) return ret; + val = clamp_val(val, 0, 127000); mutex_lock(&data->update_lock); data->auto_temp[nr] = AUTO_TEMP_MIN_TO_REG(val, data->auto_temp[nr]); adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr), @@ -394,6 +395,7 @@ set_auto_temp_max(struct device *dev, struct device_attribute *attr, if (ret) return ret; + val = clamp_val(val, 0, 127000); mutex_lock(&data->update_lock); data->temp_max[nr] = AUTO_TEMP_MAX_TO_REG(val, data->auto_temp[nr], data->pwm[nr]); @@ -696,7 +698,7 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, if (ret) return ret; - val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875); + val = clamp_val(val, -55000, 127000); mutex_lock(&data->update_lock); data->temp_min[nr] = TEMP_TO_REG(val); adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr), @@ -717,7 +719,7 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, if (ret) return ret; - val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875); + val = clamp_val(val, -55000, 127000); mutex_lock(&data->update_lock); data->temp_max[nr] = TEMP_TO_REG(val); adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr), @@ -738,7 +740,7 @@ static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr, if (ret) return ret; - val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875); + val = clamp_val(val, -55000, 127000); mutex_lock(&data->update_lock); data->temp_crit[nr] = TEMP_TO_REG(val); adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr), -- cgit v1.2.3 From 525549d7342fca7fca9fc11298b5ab3617b6f730 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 7 Jul 2014 15:13:12 +0200 Subject: ALSA: hda: Fix build warning The hda_tegra_disable_clocks() function is only used by the suspend and resume code, so it needs to be included in the #ifdef CONFIG_PM_SLEEP block to prevent the following warning: CC sound/pci/hda/hda_tegra.o sound/pci/hda/hda_tegra.c:238:13: warning: 'hda_tegra_disable_clocks' defined but not used [-Wunused-function] static void hda_tegra_disable_clocks(struct hda_tegra *data) ^ Signed-off-by: Thierry Reding Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_tegra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c index a366ba9293a8..358414da6418 100644 --- a/sound/pci/hda/hda_tegra.c +++ b/sound/pci/hda/hda_tegra.c @@ -236,6 +236,7 @@ disable_hda: return rc; } +#ifdef CONFIG_PM_SLEEP static void hda_tegra_disable_clocks(struct hda_tegra *data) { clk_disable_unprepare(data->hda2hdmi_clk); @@ -243,7 +244,6 @@ static void hda_tegra_disable_clocks(struct hda_tegra *data) clk_disable_unprepare(data->hda_clk); } -#ifdef CONFIG_PM_SLEEP /* * power management */ -- cgit v1.2.3 From 126b9d4365b110c157bc4cbc32540dfa66c9c85a Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 7 Jul 2014 15:28:50 +0200 Subject: fuse: timeout comparison fix As suggested by checkpatch.pl, use time_before64() instead of direct comparison of jiffies64 values. Signed-off-by: Miklos Szeredi Cc: --- fs/fuse/dir.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 42198359fa1b..225176203a8c 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -198,7 +198,7 @@ static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags) inode = ACCESS_ONCE(entry->d_inode); if (inode && is_bad_inode(inode)) goto invalid; - else if (fuse_dentry_time(entry) < get_jiffies_64()) { + else if (time_before64(fuse_dentry_time(entry), get_jiffies_64())) { int err; struct fuse_entry_out outarg; struct fuse_req *req; @@ -985,7 +985,7 @@ int fuse_update_attributes(struct inode *inode, struct kstat *stat, int err; bool r; - if (fi->i_time < get_jiffies_64()) { + if (time_before64(fi->i_time, get_jiffies_64())) { r = true; err = fuse_do_getattr(inode, stat, file); } else { @@ -1171,7 +1171,7 @@ static int fuse_permission(struct inode *inode, int mask) ((mask & MAY_EXEC) && S_ISREG(inode->i_mode))) { struct fuse_inode *fi = get_fuse_inode(inode); - if (fi->i_time < get_jiffies_64()) { + if (time_before64(fi->i_time, get_jiffies_64())) { refreshed = true; err = fuse_perm_getattr(inode, mask); -- cgit v1.2.3 From 154210ccb3a871e631bf39fdeb7a8731d98af87b Mon Sep 17 00:00:00 2001 From: Anand Avati Date: Thu, 26 Jun 2014 20:21:57 -0400 Subject: fuse: ignore entry-timeout on LOOKUP_REVAL The following test case demonstrates the bug: sh# mount -t glusterfs localhost:meta-test /mnt/one sh# mount -t glusterfs localhost:meta-test /mnt/two sh# echo stuff > /mnt/one/file; rm -f /mnt/two/file; echo stuff > /mnt/one/file bash: /mnt/one/file: Stale file handle sh# echo stuff > /mnt/one/file; rm -f /mnt/two/file; sleep 1; echo stuff > /mnt/one/file On the second open() on /mnt/one, FUSE would have used the old nodeid (file handle) trying to re-open it. Gluster is returning -ESTALE. The ESTALE propagates back to namei.c:filename_lookup() where lookup is re-attempted with LOOKUP_REVAL. The right behavior now, would be for FUSE to ignore the entry-timeout and and do the up-call revalidation. Instead FUSE is ignoring LOOKUP_REVAL, succeeding the revalidation (because entry-timeout has not passed), and open() is again retried on the old file handle and finally the ESTALE is going back to the application. Fix: if revalidation is happening with LOOKUP_REVAL, then ignore entry-timeout and always do the up-call. Signed-off-by: Anand Avati Reviewed-by: Niels de Vos Signed-off-by: Miklos Szeredi Cc: stable@vger.kernel.org --- fs/fuse/dir.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 225176203a8c..202a9721be93 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -198,7 +198,8 @@ static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags) inode = ACCESS_ONCE(entry->d_inode); if (inode && is_bad_inode(inode)) goto invalid; - else if (time_before64(fuse_dentry_time(entry), get_jiffies_64())) { + else if (time_before64(fuse_dentry_time(entry), get_jiffies_64()) || + (flags & LOOKUP_REVAL)) { int err; struct fuse_entry_out outarg; struct fuse_req *req; -- cgit v1.2.3 From 7b3d8bf7718a8de8ac6a25ed7332c1c129839400 Mon Sep 17 00:00:00 2001 From: Himangi Saraogi Date: Thu, 26 Jun 2014 23:06:52 +0530 Subject: fuse: inode: drop cast This patch removes the cast on data of type void * as it is not needed. The following Coccinelle semantic patch was used for making the change: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T *)x)->f | - (T *) e ) Signed-off-by: Himangi Saraogi Acked-by: Julia Lawall Signed-off-by: Miklos Szeredi --- fs/fuse/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 754dcf23de8a..7b8fc7d33def 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -1006,7 +1006,7 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) sb->s_flags &= ~(MS_NOSEC | MS_I_VERSION); - if (!parse_fuse_opt((char *) data, &d, is_bdev)) + if (!parse_fuse_opt(data, &d, is_bdev)) goto err; if (is_bdev) { -- cgit v1.2.3 From 233a01fa9c4c7c41238537e8db8434667ff28a2f Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 7 Jul 2014 15:28:51 +0200 Subject: fuse: handle large user and group ID If the number in "user_id=N" or "group_id=N" mount options was larger than INT_MAX then fuse returned EINVAL. Fix this to handle all valid uid/gid values. Signed-off-by: Miklos Szeredi Cc: stable@vger.kernel.org --- fs/fuse/inode.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 7b8fc7d33def..8474028d7848 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -478,6 +478,17 @@ static const match_table_t tokens = { {OPT_ERR, NULL} }; +static int fuse_match_uint(substring_t *s, unsigned int *res) +{ + int err = -ENOMEM; + char *buf = match_strdup(s); + if (buf) { + err = kstrtouint(buf, 10, res); + kfree(buf); + } + return err; +} + static int parse_fuse_opt(char *opt, struct fuse_mount_data *d, int is_bdev) { char *p; @@ -488,6 +499,7 @@ static int parse_fuse_opt(char *opt, struct fuse_mount_data *d, int is_bdev) while ((p = strsep(&opt, ",")) != NULL) { int token; int value; + unsigned uv; substring_t args[MAX_OPT_ARGS]; if (!*p) continue; @@ -511,18 +523,18 @@ static int parse_fuse_opt(char *opt, struct fuse_mount_data *d, int is_bdev) break; case OPT_USER_ID: - if (match_int(&args[0], &value)) + if (fuse_match_uint(&args[0], &uv)) return 0; - d->user_id = make_kuid(current_user_ns(), value); + d->user_id = make_kuid(current_user_ns(), uv); if (!uid_valid(d->user_id)) return 0; d->user_id_present = 1; break; case OPT_GROUP_ID: - if (match_int(&args[0], &value)) + if (fuse_match_uint(&args[0], &uv)) return 0; - d->group_id = make_kgid(current_user_ns(), value); + d->group_id = make_kgid(current_user_ns(), uv); if (!gid_valid(d->group_id)) return 0; d->group_id_present = 1; -- cgit v1.2.3 From c55a01d360afafcd52bc405c044a6ebf5de436d5 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 7 Jul 2014 15:28:51 +0200 Subject: fuse: avoid scheduling while atomic As reported by Richard Sharpe, an attempt to use fuse_notify_inval_entry() triggers complains about scheduling while atomic: BUG: scheduling while atomic: fuse.hf/13976/0x10000001 This happens because fuse_notify_inval_entry() attempts to allocate memory with GFP_KERNEL, holding "struct fuse_copy_state" mapped by kmap_atomic(). Introduced by commit 58bda1da4b3c "fuse/dev: use atomic maps" Fix by moving the map/unmap to just cover the actual memcpy operation. Original patch from Maxim Patlasov Reported-by: Richard Sharpe Signed-off-by: Miklos Szeredi Cc: # v3.15+ --- fs/fuse/dev.c | 51 +++++++++++++++++++++++---------------------------- 1 file changed, 23 insertions(+), 28 deletions(-) diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index aac71ce373e4..75fa055012b2 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -643,9 +643,8 @@ struct fuse_copy_state { unsigned long seglen; unsigned long addr; struct page *pg; - void *mapaddr; - void *buf; unsigned len; + unsigned offset; unsigned move_pages:1; }; @@ -666,23 +665,17 @@ static void fuse_copy_finish(struct fuse_copy_state *cs) if (cs->currbuf) { struct pipe_buffer *buf = cs->currbuf; - if (!cs->write) { - kunmap_atomic(cs->mapaddr); - } else { - kunmap_atomic(cs->mapaddr); + if (cs->write) buf->len = PAGE_SIZE - cs->len; - } cs->currbuf = NULL; - cs->mapaddr = NULL; - } else if (cs->mapaddr) { - kunmap_atomic(cs->mapaddr); + } else if (cs->pg) { if (cs->write) { flush_dcache_page(cs->pg); set_page_dirty_lock(cs->pg); } put_page(cs->pg); - cs->mapaddr = NULL; } + cs->pg = NULL; } /* @@ -691,7 +684,7 @@ static void fuse_copy_finish(struct fuse_copy_state *cs) */ static int fuse_copy_fill(struct fuse_copy_state *cs) { - unsigned long offset; + struct page *page; int err; unlock_request(cs->fc, cs->req); @@ -706,14 +699,12 @@ static int fuse_copy_fill(struct fuse_copy_state *cs) BUG_ON(!cs->nr_segs); cs->currbuf = buf; - cs->mapaddr = kmap_atomic(buf->page); + cs->pg = buf->page; + cs->offset = buf->offset; cs->len = buf->len; - cs->buf = cs->mapaddr + buf->offset; cs->pipebufs++; cs->nr_segs--; } else { - struct page *page; - if (cs->nr_segs == cs->pipe->buffers) return -EIO; @@ -726,8 +717,8 @@ static int fuse_copy_fill(struct fuse_copy_state *cs) buf->len = 0; cs->currbuf = buf; - cs->mapaddr = kmap_atomic(page); - cs->buf = cs->mapaddr; + cs->pg = page; + cs->offset = 0; cs->len = PAGE_SIZE; cs->pipebufs++; cs->nr_segs++; @@ -740,14 +731,13 @@ static int fuse_copy_fill(struct fuse_copy_state *cs) cs->iov++; cs->nr_segs--; } - err = get_user_pages_fast(cs->addr, 1, cs->write, &cs->pg); + err = get_user_pages_fast(cs->addr, 1, cs->write, &page); if (err < 0) return err; BUG_ON(err != 1); - offset = cs->addr % PAGE_SIZE; - cs->mapaddr = kmap_atomic(cs->pg); - cs->buf = cs->mapaddr + offset; - cs->len = min(PAGE_SIZE - offset, cs->seglen); + cs->pg = page; + cs->offset = cs->addr % PAGE_SIZE; + cs->len = min(PAGE_SIZE - cs->offset, cs->seglen); cs->seglen -= cs->len; cs->addr += cs->len; } @@ -760,15 +750,20 @@ static int fuse_copy_do(struct fuse_copy_state *cs, void **val, unsigned *size) { unsigned ncpy = min(*size, cs->len); if (val) { + void *pgaddr = kmap_atomic(cs->pg); + void *buf = pgaddr + cs->offset; + if (cs->write) - memcpy(cs->buf, *val, ncpy); + memcpy(buf, *val, ncpy); else - memcpy(*val, cs->buf, ncpy); + memcpy(*val, buf, ncpy); + + kunmap_atomic(pgaddr); *val += ncpy; } *size -= ncpy; cs->len -= ncpy; - cs->buf += ncpy; + cs->offset += ncpy; return ncpy; } @@ -874,8 +869,8 @@ static int fuse_try_move_page(struct fuse_copy_state *cs, struct page **pagep) out_fallback_unlock: unlock_page(newpage); out_fallback: - cs->mapaddr = kmap_atomic(buf->page); - cs->buf = cs->mapaddr + buf->offset; + cs->pg = buf->page; + cs->offset = buf->offset; err = lock_request(cs->fc, cs->req); if (err) -- cgit v1.2.3 From 3179e8e684603645b573fdc46139473d5ee4b189 Mon Sep 17 00:00:00 2001 From: Wen-chien Jesse Sung Date: Wed, 2 Jul 2014 21:06:59 +0800 Subject: HID: use multi input quirk for 22b9:2968 This device generates ABS_Z and ABS_RX events instead of ABS_X and ABS_Y. Signed-off-by: Wen-chien Jesse Sung Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/usbhid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 1efeb12a38c7..48b66bbffc94 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -323,6 +323,7 @@ #define USB_VENDOR_ID_ETURBOTOUCH 0x22b9 #define USB_DEVICE_ID_ETURBOTOUCH 0x0006 +#define USB_DEVICE_ID_ETURBOTOUCH_2968 0x2968 #define USB_VENDOR_ID_EZKEY 0x0518 #define USB_DEVICE_ID_BTC_8193 0x0002 diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index fbaefc34ee95..31e6727cd009 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -49,6 +49,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_ETURBOTOUCH, USB_DEVICE_ID_ETURBOTOUCH, HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_ETURBOTOUCH, USB_DEVICE_ID_ETURBOTOUCH_2968, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_GREENASIA, USB_DEVICE_ID_GREENASIA_DUAL_USB_JOYPAD, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS }, { USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT }, -- cgit v1.2.3 From 5a6024f1604eef119cf3a6fa413fe0261a81a8f3 Mon Sep 17 00:00:00 2001 From: Yasuaki Ishimatsu Date: Mon, 7 Jul 2014 09:56:48 -0400 Subject: workqueue: zero cpumask of wq_numa_possible_cpumask on init When hot-adding and onlining CPU, kernel panic occurs, showing following call trace. BUG: unable to handle kernel paging request at 0000000000001d08 IP: [] __alloc_pages_nodemask+0x9d/0xb10 PGD 0 Oops: 0000 [#1] SMP ... Call Trace: [] ? cpumask_next_and+0x35/0x50 [] ? find_busiest_group+0x113/0x8f0 [] ? deactivate_slab+0x349/0x3c0 [] new_slab+0x91/0x300 [] __slab_alloc+0x2bb/0x482 [] ? copy_process.part.25+0xfc/0x14c0 [] ? load_balance+0x218/0x890 [] ? sched_clock+0x9/0x10 [] ? trace_clock_local+0x9/0x10 [] kmem_cache_alloc_node+0x8c/0x200 [] copy_process.part.25+0xfc/0x14c0 [] ? trace_buffer_unlock_commit+0x4d/0x60 [] ? kthread_create_on_node+0x140/0x140 [] do_fork+0xbc/0x360 [] kernel_thread+0x26/0x30 [] kthreadd+0x2c2/0x300 [] ? kthread_create_on_cpu+0x60/0x60 [] ret_from_fork+0x7c/0xb0 [] ? kthread_create_on_cpu+0x60/0x60 In my investigation, I found the root cause is wq_numa_possible_cpumask. All entries of wq_numa_possible_cpumask is allocated by alloc_cpumask_var_node(). And these entries are used without initializing. So these entries have wrong value. When hot-adding and onlining CPU, wq_update_unbound_numa() is called. wq_update_unbound_numa() calls alloc_unbound_pwq(). And alloc_unbound_pwq() calls get_unbound_pool(). In get_unbound_pool(), worker_pool->node is set as follow: 3592 /* if cpumask is contained inside a NUMA node, we belong to that node */ 3593 if (wq_numa_enabled) { 3594 for_each_node(node) { 3595 if (cpumask_subset(pool->attrs->cpumask, 3596 wq_numa_possible_cpumask[node])) { 3597 pool->node = node; 3598 break; 3599 } 3600 } 3601 } But wq_numa_possible_cpumask[node] does not have correct cpumask. So, wrong node is selected. As a result, kernel panic occurs. By this patch, all entries of wq_numa_possible_cpumask are allocated by zalloc_cpumask_var_node to initialize them. And the panic disappeared. Signed-off-by: Yasuaki Ishimatsu Reviewed-by: Lai Jiangshan Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org Fixes: bce903809ab3 ("workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[]") --- kernel/workqueue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 6f5f9c7323f4..35974ac69600 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -4880,7 +4880,7 @@ static void __init wq_numa_init(void) BUG_ON(!tbl); for_each_node(node) - BUG_ON(!alloc_cpumask_var_node(&tbl[node], GFP_KERNEL, + BUG_ON(!zalloc_cpumask_var_node(&tbl[node], GFP_KERNEL, node_online(node) ? node : NUMA_NO_NODE)); for_each_possible_cpu(cpu) { -- cgit v1.2.3 From f6c2dd20108c35e30e2c1f3c6142d189451a626b Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 6 Jul 2014 11:39:24 -0700 Subject: hwmon: (emc2103) Clamp limits instead of bailing out It is customary to clamp limits instead of bailing out with an error if a configured limit is out of the range supported by the driver. This simplifies limit configuration, since the user will not typically know chip and/or driver specific limits. Reviewed-by: Jean Delvare Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck --- drivers/hwmon/emc2103.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c index fd892dd48e4c..78002de46cb6 100644 --- a/drivers/hwmon/emc2103.c +++ b/drivers/hwmon/emc2103.c @@ -250,9 +250,7 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *da, if (result < 0) return result; - val = DIV_ROUND_CLOSEST(val, 1000); - if ((val < -63) || (val > 127)) - return -EINVAL; + val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -63, 127); mutex_lock(&data->update_lock); data->temp_min[nr] = val; @@ -274,9 +272,7 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *da, if (result < 0) return result; - val = DIV_ROUND_CLOSEST(val, 1000); - if ((val < -63) || (val > 127)) - return -EINVAL; + val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -63, 127); mutex_lock(&data->update_lock); data->temp_max[nr] = val; @@ -390,15 +386,14 @@ static ssize_t set_fan_target(struct device *dev, struct device_attribute *da, { struct emc2103_data *data = emc2103_update_device(dev); struct i2c_client *client = to_i2c_client(dev); - long rpm_target; + unsigned long rpm_target; - int result = kstrtol(buf, 10, &rpm_target); + int result = kstrtoul(buf, 10, &rpm_target); if (result < 0) return result; /* Datasheet states 16384 as maximum RPM target (table 3.2) */ - if ((rpm_target < 0) || (rpm_target > 16384)) - return -EINVAL; + rpm_target = clamp_val(rpm_target, 0, 16384); mutex_lock(&data->update_lock); -- cgit v1.2.3 From 6c642e442e99af1ca026af55a16f23b5f8ee612a Mon Sep 17 00:00:00 2001 From: zhangdianfang Date: Fri, 30 May 2014 08:37:28 +0800 Subject: tools/liblockdep: Fix comparison of a boolean value with a value of 2 Comparison of a boolean value (!__init_state) with a value of 2 (done) as currently happens in the code is unlikely to succeed and causes repeated initialization of the pthread function pointers. Instead, remove boolean comparison so that we would initialize said function pointers only once. Ref: https://bugzilla.kernel.org/show_bug.cgi?id=76741 Cc: Jean Delvare Reported-by: David Binderman Signed-off-by: Dianfang Zhang Signed-off-by: Sasha Levin --- tools/lib/lockdep/preload.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/lib/lockdep/preload.c b/tools/lib/lockdep/preload.c index 23bd69cb5ade..b5e52af6ddf3 100644 --- a/tools/lib/lockdep/preload.c +++ b/tools/lib/lockdep/preload.c @@ -92,7 +92,7 @@ enum { none, prepare, done, } __init_state; static void init_preload(void); static void try_init_preload(void) { - if (!__init_state != done) + if (__init_state != done) init_preload(); } -- cgit v1.2.3 From 0c37c686b336aeead2f0b982f24eafaeb19435b1 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Mon, 7 Jul 2014 12:14:27 -0400 Subject: tools/liblockdep: Remove debug print left over from development Remove a debug print in init_preload() which was left over from development and isn't usefull at all currently. It was also causing false positive test results. Reported-by: S. Lockwood-Childs Signed-off-by: Sasha Levin --- tools/lib/lockdep/preload.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/tools/lib/lockdep/preload.c b/tools/lib/lockdep/preload.c index b5e52af6ddf3..51ec2ec8371b 100644 --- a/tools/lib/lockdep/preload.c +++ b/tools/lib/lockdep/preload.c @@ -439,8 +439,6 @@ __attribute__((constructor)) static void init_preload(void) ll_pthread_rwlock_unlock = dlsym(RTLD_NEXT, "pthread_rwlock_unlock"); #endif - printf("%p\n", ll_pthread_mutex_trylock);fflush(stdout); - lockdep_init(); __init_state = done; -- cgit v1.2.3 From b10827814e9c81c5a14fb73c5a6e06bd85df3f94 Mon Sep 17 00:00:00 2001 From: "S. Lockwood-Childs" Date: Mon, 7 Jul 2014 00:17:33 -0700 Subject: tools/liblockdep: Account for bitfield changes in lockdeps lock_acquire Commit fb9edbe984 shortened held_lock->check from a 2-bit field to a 1-bit field. Make liblockdep compatible with the new definition by passing check=1 to lock_acquire() calls, rather than the old value check=2 (which inadvertently disabled checks by overflowing to 0). Without this fix, several of the test cases in liblockdep run_tests.sh were failing. Signed-off-by: S. Lockwood-Childs Signed-off-by: Sasha Levin --- tools/lib/lockdep/include/liblockdep/mutex.h | 4 ++-- tools/lib/lockdep/include/liblockdep/rwlock.h | 8 ++++---- tools/lib/lockdep/preload.c | 16 ++++++++-------- 3 files changed, 14 insertions(+), 14 deletions(-) diff --git a/tools/lib/lockdep/include/liblockdep/mutex.h b/tools/lib/lockdep/include/liblockdep/mutex.h index c342f7087147..ee53a42818ca 100644 --- a/tools/lib/lockdep/include/liblockdep/mutex.h +++ b/tools/lib/lockdep/include/liblockdep/mutex.h @@ -35,7 +35,7 @@ static inline int __mutex_init(liblockdep_pthread_mutex_t *lock, static inline int liblockdep_pthread_mutex_lock(liblockdep_pthread_mutex_t *lock) { - lock_acquire(&lock->dep_map, 0, 0, 0, 2, NULL, (unsigned long)_RET_IP_); + lock_acquire(&lock->dep_map, 0, 0, 0, 1, NULL, (unsigned long)_RET_IP_); return pthread_mutex_lock(&lock->mutex); } @@ -47,7 +47,7 @@ static inline int liblockdep_pthread_mutex_unlock(liblockdep_pthread_mutex_t *lo static inline int liblockdep_pthread_mutex_trylock(liblockdep_pthread_mutex_t *lock) { - lock_acquire(&lock->dep_map, 0, 1, 0, 2, NULL, (unsigned long)_RET_IP_); + lock_acquire(&lock->dep_map, 0, 1, 0, 1, NULL, (unsigned long)_RET_IP_); return pthread_mutex_trylock(&lock->mutex) == 0 ? 1 : 0; } diff --git a/tools/lib/lockdep/include/liblockdep/rwlock.h b/tools/lib/lockdep/include/liblockdep/rwlock.h index a680ab8c2e36..4ec03f861551 100644 --- a/tools/lib/lockdep/include/liblockdep/rwlock.h +++ b/tools/lib/lockdep/include/liblockdep/rwlock.h @@ -36,7 +36,7 @@ static inline int __rwlock_init(liblockdep_pthread_rwlock_t *lock, static inline int liblockdep_pthread_rwlock_rdlock(liblockdep_pthread_rwlock_t *lock) { - lock_acquire(&lock->dep_map, 0, 0, 2, 2, NULL, (unsigned long)_RET_IP_); + lock_acquire(&lock->dep_map, 0, 0, 2, 1, NULL, (unsigned long)_RET_IP_); return pthread_rwlock_rdlock(&lock->rwlock); } @@ -49,19 +49,19 @@ static inline int liblockdep_pthread_rwlock_unlock(liblockdep_pthread_rwlock_t * static inline int liblockdep_pthread_rwlock_wrlock(liblockdep_pthread_rwlock_t *lock) { - lock_acquire(&lock->dep_map, 0, 0, 0, 2, NULL, (unsigned long)_RET_IP_); + lock_acquire(&lock->dep_map, 0, 0, 0, 1, NULL, (unsigned long)_RET_IP_); return pthread_rwlock_wrlock(&lock->rwlock); } static inline int liblockdep_pthread_rwlock_tryrdlock(liblockdep_pthread_rwlock_t *lock) { - lock_acquire(&lock->dep_map, 0, 1, 2, 2, NULL, (unsigned long)_RET_IP_); + lock_acquire(&lock->dep_map, 0, 1, 2, 1, NULL, (unsigned long)_RET_IP_); return pthread_rwlock_tryrdlock(&lock->rwlock) == 0 ? 1 : 0; } static inline int liblockdep_pthread_rwlock_trywlock(liblockdep_pthread_rwlock_t *lock) { - lock_acquire(&lock->dep_map, 0, 1, 0, 2, NULL, (unsigned long)_RET_IP_); + lock_acquire(&lock->dep_map, 0, 1, 0, 1, NULL, (unsigned long)_RET_IP_); return pthread_rwlock_trywlock(&lock->rwlock) == 0 ? 1 : 0; } diff --git a/tools/lib/lockdep/preload.c b/tools/lib/lockdep/preload.c index 51ec2ec8371b..6f803609e498 100644 --- a/tools/lib/lockdep/preload.c +++ b/tools/lib/lockdep/preload.c @@ -252,7 +252,7 @@ int pthread_mutex_lock(pthread_mutex_t *mutex) try_init_preload(); - lock_acquire(&__get_lock(mutex)->dep_map, 0, 0, 0, 2, NULL, + lock_acquire(&__get_lock(mutex)->dep_map, 0, 0, 0, 1, NULL, (unsigned long)_RET_IP_); /* * Here's the thing with pthread mutexes: unlike the kernel variant, @@ -281,7 +281,7 @@ int pthread_mutex_trylock(pthread_mutex_t *mutex) try_init_preload(); - lock_acquire(&__get_lock(mutex)->dep_map, 0, 1, 0, 2, NULL, (unsigned long)_RET_IP_); + lock_acquire(&__get_lock(mutex)->dep_map, 0, 1, 0, 1, NULL, (unsigned long)_RET_IP_); r = ll_pthread_mutex_trylock(mutex); if (r) lock_release(&__get_lock(mutex)->dep_map, 0, (unsigned long)_RET_IP_); @@ -303,7 +303,7 @@ int pthread_mutex_unlock(pthread_mutex_t *mutex) */ r = ll_pthread_mutex_unlock(mutex); if (r) - lock_acquire(&__get_lock(mutex)->dep_map, 0, 0, 0, 2, NULL, (unsigned long)_RET_IP_); + lock_acquire(&__get_lock(mutex)->dep_map, 0, 0, 0, 1, NULL, (unsigned long)_RET_IP_); return r; } @@ -352,7 +352,7 @@ int pthread_rwlock_rdlock(pthread_rwlock_t *rwlock) init_preload(); - lock_acquire(&__get_lock(rwlock)->dep_map, 0, 0, 2, 2, NULL, (unsigned long)_RET_IP_); + lock_acquire(&__get_lock(rwlock)->dep_map, 0, 0, 2, 1, NULL, (unsigned long)_RET_IP_); r = ll_pthread_rwlock_rdlock(rwlock); if (r) lock_release(&__get_lock(rwlock)->dep_map, 0, (unsigned long)_RET_IP_); @@ -366,7 +366,7 @@ int pthread_rwlock_tryrdlock(pthread_rwlock_t *rwlock) init_preload(); - lock_acquire(&__get_lock(rwlock)->dep_map, 0, 1, 2, 2, NULL, (unsigned long)_RET_IP_); + lock_acquire(&__get_lock(rwlock)->dep_map, 0, 1, 2, 1, NULL, (unsigned long)_RET_IP_); r = ll_pthread_rwlock_tryrdlock(rwlock); if (r) lock_release(&__get_lock(rwlock)->dep_map, 0, (unsigned long)_RET_IP_); @@ -380,7 +380,7 @@ int pthread_rwlock_trywrlock(pthread_rwlock_t *rwlock) init_preload(); - lock_acquire(&__get_lock(rwlock)->dep_map, 0, 1, 0, 2, NULL, (unsigned long)_RET_IP_); + lock_acquire(&__get_lock(rwlock)->dep_map, 0, 1, 0, 1, NULL, (unsigned long)_RET_IP_); r = ll_pthread_rwlock_trywrlock(rwlock); if (r) lock_release(&__get_lock(rwlock)->dep_map, 0, (unsigned long)_RET_IP_); @@ -394,7 +394,7 @@ int pthread_rwlock_wrlock(pthread_rwlock_t *rwlock) init_preload(); - lock_acquire(&__get_lock(rwlock)->dep_map, 0, 0, 0, 2, NULL, (unsigned long)_RET_IP_); + lock_acquire(&__get_lock(rwlock)->dep_map, 0, 0, 0, 1, NULL, (unsigned long)_RET_IP_); r = ll_pthread_rwlock_wrlock(rwlock); if (r) lock_release(&__get_lock(rwlock)->dep_map, 0, (unsigned long)_RET_IP_); @@ -411,7 +411,7 @@ int pthread_rwlock_unlock(pthread_rwlock_t *rwlock) lock_release(&__get_lock(rwlock)->dep_map, 0, (unsigned long)_RET_IP_); r = ll_pthread_rwlock_unlock(rwlock); if (r) - lock_acquire(&__get_lock(rwlock)->dep_map, 0, 0, 0, 2, NULL, (unsigned long)_RET_IP_); + lock_acquire(&__get_lock(rwlock)->dep_map, 0, 0, 0, 1, NULL, (unsigned long)_RET_IP_); return r; } -- cgit v1.2.3 From 7fe7381cbdadf16792e733789983690b3fa82880 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 7 Jul 2014 07:10:10 -0700 Subject: hwmon: (adc128d818) Drop write support on inX_input attributes Writes into input registers doesn't make sense, even more so since the writes actually ended up writing into the maximum limit registers. Drop it. Cc: stable@vger.kernel.org Reviewed-by: Jean Delvare Signed-off-by: Guenter Roeck --- drivers/hwmon/adc128d818.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/hwmon/adc128d818.c b/drivers/hwmon/adc128d818.c index 5ffd81f19d01..0625e50d7a6e 100644 --- a/drivers/hwmon/adc128d818.c +++ b/drivers/hwmon/adc128d818.c @@ -239,50 +239,50 @@ static ssize_t adc128_show_alarm(struct device *dev, return sprintf(buf, "%u\n", !!(alarms & mask)); } -static SENSOR_DEVICE_ATTR_2(in0_input, S_IWUSR | S_IRUGO, - adc128_show_in, adc128_set_in, 0, 0); +static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, + adc128_show_in, NULL, 0, 0); static SENSOR_DEVICE_ATTR_2(in0_min, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 0, 1); static SENSOR_DEVICE_ATTR_2(in0_max, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 0, 2); -static SENSOR_DEVICE_ATTR_2(in1_input, S_IWUSR | S_IRUGO, - adc128_show_in, adc128_set_in, 1, 0); +static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, + adc128_show_in, NULL, 1, 0); static SENSOR_DEVICE_ATTR_2(in1_min, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 1, 1); static SENSOR_DEVICE_ATTR_2(in1_max, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 1, 2); -static SENSOR_DEVICE_ATTR_2(in2_input, S_IWUSR | S_IRUGO, - adc128_show_in, adc128_set_in, 2, 0); +static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, + adc128_show_in, NULL, 2, 0); static SENSOR_DEVICE_ATTR_2(in2_min, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 2, 1); static SENSOR_DEVICE_ATTR_2(in2_max, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 2, 2); -static SENSOR_DEVICE_ATTR_2(in3_input, S_IWUSR | S_IRUGO, - adc128_show_in, adc128_set_in, 3, 0); +static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, + adc128_show_in, NULL, 3, 0); static SENSOR_DEVICE_ATTR_2(in3_min, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 3, 1); static SENSOR_DEVICE_ATTR_2(in3_max, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 3, 2); -static SENSOR_DEVICE_ATTR_2(in4_input, S_IWUSR | S_IRUGO, - adc128_show_in, adc128_set_in, 4, 0); +static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, + adc128_show_in, NULL, 4, 0); static SENSOR_DEVICE_ATTR_2(in4_min, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 4, 1); static SENSOR_DEVICE_ATTR_2(in4_max, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 4, 2); -static SENSOR_DEVICE_ATTR_2(in5_input, S_IWUSR | S_IRUGO, - adc128_show_in, adc128_set_in, 5, 0); +static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, + adc128_show_in, NULL, 5, 0); static SENSOR_DEVICE_ATTR_2(in5_min, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 5, 1); static SENSOR_DEVICE_ATTR_2(in5_max, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 5, 2); -static SENSOR_DEVICE_ATTR_2(in6_input, S_IWUSR | S_IRUGO, - adc128_show_in, adc128_set_in, 6, 0); +static SENSOR_DEVICE_ATTR_2(in6_input, S_IRUGO, + adc128_show_in, NULL, 6, 0); static SENSOR_DEVICE_ATTR_2(in6_min, S_IWUSR | S_IRUGO, adc128_show_in, adc128_set_in, 6, 1); static SENSOR_DEVICE_ATTR_2(in6_max, S_IWUSR | S_IRUGO, -- cgit v1.2.3 From 9a2c33a422d60e8e55c5aff6752522dc39993b16 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 7 Jul 2014 13:53:03 +0100 Subject: ARM: l2c: fix revision checking The revision checking in l2c310_enable() was not correct; we were masking the part number rather than the revision number. Fix this to use the correct macro. Fixes: 4374d64933b1 ("ARM: l2c: add automatic enable of early BRESP") Signed-off-by: Russell King --- arch/arm/mm/cache-l2x0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 076172b69422..7c3fb41a462e 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -664,7 +664,7 @@ static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, v static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock) { - unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK; + unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK; bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9; if (rev >= L310_CACHE_ID_RTL_R2P0) { -- cgit v1.2.3 From c3a4561796cffae6996264876ffca147b5c3709a Mon Sep 17 00:00:00 2001 From: Kinglong Mee Date: Sun, 6 Jul 2014 11:34:43 +0800 Subject: nfsd: Fix bad reserving space for encoding rdattr_error Introduced by commit 561f0ed498 (nfsd4: allow large readdirs). Signed-off-by: Kinglong Mee Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4xdr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c index 2fc7abebeb9b..b56b1cc02718 100644 --- a/fs/nfsd/nfs4xdr.c +++ b/fs/nfsd/nfs4xdr.c @@ -2641,7 +2641,7 @@ nfsd4_encode_rdattr_error(struct xdr_stream *xdr, __be32 nfserr) { __be32 *p; - p = xdr_reserve_space(xdr, 6); + p = xdr_reserve_space(xdr, 20); if (!p) return NULL; *p++ = htonl(2); -- cgit v1.2.3 From 2c4db12ec469b9fcdad9f6bfd6fa20e65a563ac5 Mon Sep 17 00:00:00 2001 From: Andrea Merello Date: Sat, 5 Jul 2014 21:07:17 +0200 Subject: rt2800usb: Don't perform DMA from stack Function rt2800usb_autorun_detect() passes the address of a variable allocated onto the stack to be used for DMA by the USB layer. This has been caught by my debugging-enabled kernel. This patch change things in order to allocate that variable via kmalloc, and it adjusts things to handle the kmalloc failure case, propagating the error. [ 7363.238852] ------------[ cut here ]------------ [ 7363.243529] WARNING: CPU: 1 PID: 5235 at lib/dma-debug.c:1153 check_for_stack+0xa4/0xf0() [ 7363.251759] ehci-pci 0000:00:04.1: DMA-API: device driver maps memory fromstack [addr=ffff88006b81bad4] [ 7363.261210] Modules linked in: rt2800usb(O+) rt2800lib(O) rt2x00usb(O) rt2x00lib(O) rtl818x_pci(O) rtl8187 led_class eeprom_93cx6 mac80211 cfg80211 [last unloaded: rt2x00lib] [ 7363.277143] CPU: 1 PID: 5235 Comm: systemd-udevd Tainted: G O 3.16.0-rc3-wl+ #31 [ 7363.285546] Hardware name: System manufacturer System Product Name/M3N78 PRO, BIOS ASUS M3N78 PRO ACPI BIOS Revision 1402 12/04/2009 [ 7363.297511] 0000000000000009 ffff88006b81b710 ffffffff8175dcad ffff88006b81b758 [ 7363.305062] ffff88006b81b748 ffffffff8106d372 ffff88006cf10098 ffff88006cead6a0 [ 7363.312622] ffff88006b81bad4 ffffffff81c1e7c0 ffff88006cf10098 ffff88006b81b7a8 [ 7363.320161] Call Trace: [ 7363.322661] [] dump_stack+0x4d/0x6f [ 7363.327847] [] warn_slowpath_common+0x82/0xb0 [ 7363.333893] [] warn_slowpath_fmt+0x47/0x50 [ 7363.339686] [] check_for_stack+0xa4/0xf0 [ 7363.345298] [] debug_dma_map_page+0x10c/0x150 [ 7363.351367] [] usb_hcd_map_urb_for_dma+0x229/0x720 [ 7363.357890] [] usb_hcd_submit_urb+0x2fd/0x930 [ 7363.363929] [] ? irq_work_queue+0x71/0xd0 [ 7363.369617] [] ? wake_up_klogd+0x37/0x50 [ 7363.375219] [] ? console_unlock+0x1e5/0x420 [ 7363.381081] [] ? vprintk_emit+0x245/0x530 [ 7363.386773] [] usb_submit_urb+0x30c/0x580 [ 7363.392462] [] usb_start_wait_urb+0x65/0xf0 [ 7363.398325] [] usb_control_msg+0xcd/0x110 [ 7363.404014] [] rt2x00usb_vendor_request+0xbd/0x170 [rt2x00usb] [ 7363.411544] [] rt2800usb_autorun_detect+0x32/0x50 [rt2800usb] [ 7363.418986] [] rt2800usb_read_eeprom+0x11/0x70 [rt2800usb] [ 7363.426168] [] rt2800_probe_hw+0x11d/0xf90 [rt2800lib] [ 7363.432989] [] rt2800usb_probe_hw+0xd/0x50 [rt2800usb] [ 7363.439808] [] rt2x00lib_probe_dev+0x238/0x7c0 [rt2x00lib] [ 7363.446992] [] ? ieee80211_led_names+0xb8/0x100 [mac80211] [ 7363.454156] [] rt2x00usb_probe+0x156/0x1f0 [rt2x00usb] [ 7363.460971] [] rt2800usb_probe+0x10/0x20 [rt2800usb] [ 7363.467616] [] usb_probe_interface+0xce/0x1c0 [ 7363.473651] [] really_probe+0x70/0x240 [ 7363.479079] [] __driver_attach+0xa1/0xb0 [ 7363.484682] [] ? __device_attach+0x70/0x70 [ 7363.490461] [] bus_for_each_dev+0x63/0xa0 [ 7363.496146] [] driver_attach+0x19/0x20 [ 7363.501570] [] bus_add_driver+0x178/0x220 [ 7363.507270] [] driver_register+0x5b/0xe0 [ 7363.512874] [] usb_register_driver+0xa0/0x170 [ 7363.518905] [] ? 0xffffffffa0079fff [ 7363.524074] [] rt2800usb_driver_init+0x1e/0x20 [rt2800usb] [ 7363.531247] [] do_one_initcall+0x84/0x1b0 [ 7363.536932] [] ? kfree+0xd0/0x110 [ 7363.541931] [] ? __vunmap+0xaa/0xf0 [ 7363.547538] [] load_module+0x1aee/0x2040 [ 7363.553141] [] ? store_uevent+0x50/0x50 [ 7363.558676] [] SyS_init_module+0x9e/0xc0 [ 7363.564285] [] system_call_fastpath+0x16/0x1b [ 7363.570338] ---[ end trace 01ef5f822bea9882 ]--- Signed-off-by: Andrea Merello Acked-by: Helmut Schaa Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800usb.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index e11dab2216c6..832006b5aab1 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -231,9 +231,12 @@ static enum hrtimer_restart rt2800usb_tx_sta_fifo_timeout(struct hrtimer *timer) */ static int rt2800usb_autorun_detect(struct rt2x00_dev *rt2x00dev) { - __le32 reg; + __le32 *reg; u32 fw_mode; + reg = kmalloc(sizeof(*reg), GFP_KERNEL); + if (reg == NULL) + return -ENOMEM; /* cannot use rt2x00usb_register_read here as it uses different * mode (MULTI_READ vs. DEVICE_MODE) and does not pass the * magic value USB_MODE_AUTORUN (0x11) to the device, thus the @@ -241,8 +244,9 @@ static int rt2800usb_autorun_detect(struct rt2x00_dev *rt2x00dev) */ rt2x00usb_vendor_request(rt2x00dev, USB_DEVICE_MODE, USB_VENDOR_REQUEST_IN, 0, USB_MODE_AUTORUN, - ®, sizeof(reg), REGISTER_TIMEOUT_FIRMWARE); - fw_mode = le32_to_cpu(reg); + reg, sizeof(*reg), REGISTER_TIMEOUT_FIRMWARE); + fw_mode = le32_to_cpu(*reg); + kfree(reg); if ((fw_mode & 0x00000003) == 2) return 1; @@ -261,6 +265,7 @@ static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev, int status; u32 offset; u32 length; + int retval; /* * Check which section of the firmware we need. @@ -278,7 +283,10 @@ static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev, /* * Write firmware to device. */ - if (rt2800usb_autorun_detect(rt2x00dev)) { + retval = rt2800usb_autorun_detect(rt2x00dev); + if (retval < 0) + return retval; + if (retval) { rt2x00_info(rt2x00dev, "Firmware loading not required - NIC in AutoRun mode\n"); } else { @@ -763,7 +771,12 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, */ static int rt2800usb_efuse_detect(struct rt2x00_dev *rt2x00dev) { - if (rt2800usb_autorun_detect(rt2x00dev)) + int retval; + + retval = rt2800usb_autorun_detect(rt2x00dev); + if (retval < 0) + return retval; + if (retval) return 1; return rt2800_efuse_detect(rt2x00dev); } @@ -772,7 +785,10 @@ static int rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev) { int retval; - if (rt2800usb_efuse_detect(rt2x00dev)) + retval = rt2800usb_efuse_detect(rt2x00dev); + if (retval < 0) + return retval; + if (retval) retval = rt2800_read_eeprom_efuse(rt2x00dev); else retval = rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, -- cgit v1.2.3 From 867f9d463b82462793ea4610e748be0b04b37fc7 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Thu, 19 Jun 2014 11:19:16 +0100 Subject: ACPI / resources: only reject zero length resources based at address zero The recently merged change (in v3.14-rc6) to ACPI resource detection (below) causes all zero length ACPI resources to be elided from the table: commit b355cee88e3b1a193f0e9a81db810f6f83ad728b Author: Zhang Rui Date: Thu Feb 27 11:37:15 2014 +0800 ACPI / resources: ignore invalid ACPI device resources This change has caused a regression in (at least) serial port detection for a number of machines (see LP#1313981 [1]). These seem to represent their IO regions (presumably incorrectly) as a zero length region. Reverting the above commit restores these serial devices. Only elide zero length resources which lie at address 0. Fixes: b355cee88e3b (ACPI / resources: ignore invalid ACPI device resources) Signed-off-by: Andy Whitcroft Acked-by: Zhang Rui Cc: 3.14+ # 3.14+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/resource.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c index 0bdacc5e26a3..2ba8f02ced36 100644 --- a/drivers/acpi/resource.c +++ b/drivers/acpi/resource.c @@ -77,7 +77,7 @@ bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res) switch (ares->type) { case ACPI_RESOURCE_TYPE_MEMORY24: memory24 = &ares->data.memory24; - if (!memory24->address_length) + if (!memory24->minimum && !memory24->address_length) return false; acpi_dev_get_memresource(res, memory24->minimum, memory24->address_length, @@ -85,7 +85,7 @@ bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res) break; case ACPI_RESOURCE_TYPE_MEMORY32: memory32 = &ares->data.memory32; - if (!memory32->address_length) + if (!memory32->minimum && !memory32->address_length) return false; acpi_dev_get_memresource(res, memory32->minimum, memory32->address_length, @@ -93,7 +93,7 @@ bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res) break; case ACPI_RESOURCE_TYPE_FIXED_MEMORY32: fixed_memory32 = &ares->data.fixed_memory32; - if (!fixed_memory32->address_length) + if (!fixed_memory32->address && !fixed_memory32->address_length) return false; acpi_dev_get_memresource(res, fixed_memory32->address, fixed_memory32->address_length, @@ -150,7 +150,7 @@ bool acpi_dev_resource_io(struct acpi_resource *ares, struct resource *res) switch (ares->type) { case ACPI_RESOURCE_TYPE_IO: io = &ares->data.io; - if (!io->address_length) + if (!io->minimum && !io->address_length) return false; acpi_dev_get_ioresource(res, io->minimum, io->address_length, @@ -158,7 +158,7 @@ bool acpi_dev_resource_io(struct acpi_resource *ares, struct resource *res) break; case ACPI_RESOURCE_TYPE_FIXED_IO: fixed_io = &ares->data.fixed_io; - if (!fixed_io->address_length) + if (!fixed_io->address && !fixed_io->address_length) return false; acpi_dev_get_ioresource(res, fixed_io->address, fixed_io->address_length, -- cgit v1.2.3 From 232de514379082e7ec431c66c9713a6ef23d5dcb Mon Sep 17 00:00:00 2001 From: Josef Gajdusek Date: Tue, 17 Jun 2014 23:15:49 +0200 Subject: ACPI / battery: fix wrong value of capacity_now reported when fully charged It seems that some batteries (noticed on DELL JYPJ136) assume capacity_now = design_capacity when fully charged. This causes reported capacity to suddenly jump to >full_charge_capacity (and that means capacity reported to userspace is >100% and incorrect) values after 99%. This patch detects capacity_now > full_charge_capacity, notifies userspace (unless it is the known bug where capacity_now == design_capacity) and trims the value to full_charge_capacity. Signed-off-by: Josef Gajdusek Signed-off-by: Rafael J. Wysocki --- drivers/acpi/battery.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index bc0b286ff2ba..130f513e08c9 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -535,6 +535,20 @@ static int acpi_battery_get_state(struct acpi_battery *battery) " invalid.\n"); } + /* + * When fully charged, some batteries wrongly report + * capacity_now = design_capacity instead of = full_charge_capacity + */ + if (battery->capacity_now > battery->full_charge_capacity + && battery->full_charge_capacity != ACPI_BATTERY_VALUE_UNKNOWN) { + battery->capacity_now = battery->full_charge_capacity; + if (battery->capacity_now != battery->design_capacity) + printk_once(KERN_WARNING FW_BUG + "battery: reported current charge level (%d) " + "is higher than reported maximum charge level (%d).\n", + battery->capacity_now, battery->full_charge_capacity); + } + if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags) && battery->capacity_now >= 0 && battery->capacity_now <= 100) battery->capacity_now = (battery->capacity_now * -- cgit v1.2.3 From 0b9f7d93ca6109048a4eb06332b666b6e29df4fe Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Mon, 7 Jul 2014 15:43:51 +0800 Subject: ACPI / i915: ignore firmware requests for backlight change Some Thinkpad laptops' firmware will initiate a backlight level change request through operation region on the events of AC plug/unplug, but since we are not using firmware's interface to do the backlight setting on these affected laptops, we do not want the firmware to use some arbitrary value from its ASL variable to set the backlight level on AC plug/unplug either. Link: https://bugzilla.kernel.org/show_bug.cgi?id=76491 Link: https://bugzilla.kernel.org/show_bug.cgi?id=77091 Reported-and-tested-by: Igor Gnatenko Reported-and-tested-by: Anton Gubarkov Signed-off-by: Aaron Lu Acked-by: Jani Nikula Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video.c | 3 ++- drivers/gpu/drm/i915/intel_opregion.c | 9 +++++++++ include/acpi/video.h | 2 ++ 3 files changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index fb9ffe9adc64..5bb1278e9324 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -241,13 +241,14 @@ static bool acpi_video_use_native_backlight(void) return use_native_backlight_dmi; } -static bool acpi_video_verify_backlight_support(void) +bool acpi_video_verify_backlight_support(void) { if (acpi_osi_is_win8() && acpi_video_use_native_backlight() && backlight_device_registered(BACKLIGHT_RAW)) return false; return acpi_video_backlight_support(); } +EXPORT_SYMBOL_GPL(acpi_video_verify_backlight_support); /* backlight device sysfs support */ static int acpi_video_get_brightness(struct backlight_device *bd) diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c index 2e2c71fcc9ed..4f6b53998d79 100644 --- a/drivers/gpu/drm/i915/intel_opregion.c +++ b/drivers/gpu/drm/i915/intel_opregion.c @@ -403,6 +403,15 @@ static u32 asle_set_backlight(struct drm_device *dev, u32 bclp) DRM_DEBUG_DRIVER("bclp = 0x%08x\n", bclp); + /* + * If the acpi_video interface is not supposed to be used, don't + * bother processing backlight level change requests from firmware. + */ + if (!acpi_video_verify_backlight_support()) { + DRM_DEBUG_KMS("opregion backlight request ignored\n"); + return 0; + } + if (!(bclp & ASLE_BCLP_VALID)) return ASLC_BACKLIGHT_FAILED; diff --git a/include/acpi/video.h b/include/acpi/video.h index ea4c7bbded4d..843ef1adfbfa 100644 --- a/include/acpi/video.h +++ b/include/acpi/video.h @@ -22,6 +22,7 @@ extern void acpi_video_unregister(void); extern void acpi_video_unregister_backlight(void); extern int acpi_video_get_edid(struct acpi_device *device, int type, int device_id, void **edid); +extern bool acpi_video_verify_backlight_support(void); #else static inline int acpi_video_register(void) { return 0; } static inline void acpi_video_unregister(void) { return; } @@ -31,6 +32,7 @@ static inline int acpi_video_get_edid(struct acpi_device *device, int type, { return -ENODEV; } +static inline bool acpi_video_verify_backlight_support(void) { return false; } #endif #endif -- cgit v1.2.3 From 08a56226d84706d402372d891550e130ef5df9f0 Mon Sep 17 00:00:00 2001 From: Edward Lin Date: Fri, 20 Jun 2014 16:13:42 +0800 Subject: ACPI / video: Add Dell Inspiron 5737 to the blacklist With win8 capabiltiy, the ACPI backlight control is broken. The system also loses backlight setting when resuming from S3. Add this model to the the ACPI video detect blacklist to make backlight functionality work. Although backlight functionality works via video.use_native_backlight=1, this approach may be safer. Signed-off-by: Edward Lin Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video_detect.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index 33e3db548a29..c42feb2bacd0 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -166,6 +166,14 @@ static struct dmi_system_id video_detect_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "UL30A"), }, }, + { + .callback = video_detect_force_vendor, + .ident = "Dell Inspiron 5737", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5737"), + }, + }, { }, }; -- cgit v1.2.3 From ab7027de5c01e4fba0e5ef946f0db27b2e3d799d Mon Sep 17 00:00:00 2001 From: Martin Kepplinger Date: Mon, 23 Jun 2014 22:30:46 +0200 Subject: ACPI / video: Add Acer TravelMate B113 to native backlight blacklist Fix backlight control for Acer TravelMate B113 Laptop by adding it to the video_dmi_table. A workaround before that was to use acpi_osi=Linux or acpi_backlight=vendor on boot but even then, only the function- keys worked. With this change there is no need for boot parameters and DE's controls work as well. Signed-off-by: Martin Kepplinger [rjw: Subject] Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 5bb1278e9324..071c1dfb93f3 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -563,6 +563,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire V5-471G"), }, }, + { + .callback = video_set_use_native_backlight, + .ident = "Acer TravelMate B113", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate B113"), + }, + }, { .callback = video_set_use_native_backlight, .ident = "HP ProBook 4340s", -- cgit v1.2.3 From 35e75645f16c86918f26df1bfc2c24ad8ebb5a17 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 8 Jul 2014 08:03:49 +0900 Subject: ARM: EXYNOS: Update secondary boot addr for secure mode Almost all Exynos-series of SoCs that run in secure mode don't need additional offset for every CPU, with Exynos4412 being the only exception. Tested on Origen-Quad (Exynos4412) and Arndale-Octa (Exynos5420). While at it, fix the coding style (space around *). Signed-off-by: Sachin Kamat Signed-off-by: Tushar Behera Tested-by: Andreas Faerber Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/firmware.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index eb91d2350f8c..e8797bb78871 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -57,8 +57,13 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) boot_reg = sysram_ns_base_addr + 0x1c; - if (!soc_is_exynos4212() && !soc_is_exynos3250()) - boot_reg += 4*cpu; + /* + * Almost all Exynos-series of SoCs that run in secure mode don't need + * additional offset for every CPU, with Exynos4412 being the only + * exception. + */ + if (soc_is_exynos4412()) + boot_reg += 4 * cpu; __raw_writel(boot_addr, boot_reg); return 0; -- cgit v1.2.3 From be0b420ad6123e587738a67a9eff3ec213a57604 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Tue, 8 Jul 2014 08:31:41 +0900 Subject: ARM: dts: Update the parent for Audss clocks in Exynos5420 Currently CLK_FOUT_EPLL was set as one of the parents of AUDSS mux. As per the user manual, it should be CLK_MAU_EPLL. The problem surfaced when the bootloader in Peach-pit board set the EPLL clock as the parent of AUDSS mux. While booting the kernel, we used to get a system hang during late boot if CLK_MAU_EPLL was disabled. Signed-off-by: Tushar Behera Signed-off-by: Shaik Ameer Basha Reported-by: Kevin Hilman Tested-by: Javier Martinez Canillas Tested-by: Doug Anderson Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index e38532271ef9..79e9119d3f8d 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -167,7 +167,7 @@ compatible = "samsung,exynos5420-audss-clock"; reg = <0x03810000 0x0C>; #clock-cells = <1>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>, <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>; clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; }; -- cgit v1.2.3 From 68b7107b62983f2cff0948292429d5f5999df096 Mon Sep 17 00:00:00 2001 From: Edward Allcutt Date: Mon, 30 Jun 2014 16:16:02 +0100 Subject: ipv4: icmp: Fix pMTU handling for rare case Some older router implementations still send Fragmentation Needed errors with the Next-Hop MTU field set to zero. This is explicitly described as an eventuality that hosts must deal with by the standard (RFC 1191) since older standards specified that those bits must be zero. Linux had a generic (for all of IPv4) implementation of the algorithm described in the RFC for searching a list of MTU plateaus for a good value. Commit 46517008e116 ("ipv4: Kill ip_rt_frag_needed().") removed this as part of the changes to remove the routing cache. Subsequently any Fragmentation Needed packet with a zero Next-Hop MTU has been discarded without being passed to the per-protocol handlers or notifying userspace for raw sockets. When there is a router which does not implement RFC 1191 on an MTU limited path then this results in stalled connections since large packets are discarded and the local protocols are not notified so they never attempt to lower the pMTU. One example I have seen is an OpenBSD router terminating IPSec tunnels. It's worth pointing out that this case is distinct from the BSD 4.2 bug which incorrectly calculated the Next-Hop MTU since the commit in question dismissed that as a valid concern. All of the per-protocols handlers implement the simple approach from RFC 1191 of immediately falling back to the minimum value. Although this is sub-optimal it is vastly preferable to connections hanging indefinitely. Remove the Next-Hop MTU != 0 check and allow such packets to follow the normal path. Fixes: 46517008e116 ("ipv4: Kill ip_rt_frag_needed().") Signed-off-by: Edward Allcutt Signed-off-by: David S. Miller --- net/ipv4/icmp.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c index 79c3d947a481..42b7bcf8045b 100644 --- a/net/ipv4/icmp.c +++ b/net/ipv4/icmp.c @@ -739,8 +739,6 @@ static void icmp_unreach(struct sk_buff *skb) /* fall through */ case 0: info = ntohs(icmph->un.frag.mtu); - if (!info) - goto out; } break; case ICMP_SR_FAILED: -- cgit v1.2.3 From 11ef7a8996d5d433c9cd75d80651297eccbf6d42 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Mon, 30 Jun 2014 09:50:40 -0700 Subject: net: Performance fix for process_backlog In process_backlog the input_pkt_queue is only checked once for new packets and quota is artificially reduced to reflect precisely the number of packets on the input_pkt_queue so that the loop exits appropriately. This patches changes the behavior to be more straightforward and less convoluted. Packets are processed until either the quota is met or there are no more packets to process. This patch seems to provide a small, but noticeable performance improvement. The performance improvement is a result of staying in the process_backlog loop longer which can reduce number of IPI's. Performance data using super_netperf TCP_RR with 200 flows: Before fix: 88.06% CPU utilization 125/190/309 90/95/99% latencies 1.46808e+06 tps 1145382 intrs.sec. With fix: 87.73% CPU utilization 122/183/296 90/95/99% latencies 1.4921e+06 tps 1021674.30 intrs./sec. Signed-off-by: Tom Herbert Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/dev.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 30eedf677913..77c19c7bb490 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4227,9 +4227,8 @@ static int process_backlog(struct napi_struct *napi, int quota) #endif napi->weight = weight_p; local_irq_disable(); - while (work < quota) { + while (1) { struct sk_buff *skb; - unsigned int qlen; while ((skb = __skb_dequeue(&sd->process_queue))) { local_irq_enable(); @@ -4243,24 +4242,24 @@ static int process_backlog(struct napi_struct *napi, int quota) } rps_lock(sd); - qlen = skb_queue_len(&sd->input_pkt_queue); - if (qlen) - skb_queue_splice_tail_init(&sd->input_pkt_queue, - &sd->process_queue); - - if (qlen < quota - work) { + if (skb_queue_empty(&sd->input_pkt_queue)) { /* * Inline a custom version of __napi_complete(). * only current cpu owns and manipulates this napi, - * and NAPI_STATE_SCHED is the only possible flag set on backlog. - * we can use a plain write instead of clear_bit(), + * and NAPI_STATE_SCHED is the only possible flag set + * on backlog. + * We can use a plain write instead of clear_bit(), * and we dont need an smp_mb() memory barrier. */ list_del(&napi->poll_list); napi->state = 0; + rps_unlock(sd); - quota = work + qlen; + break; } + + skb_queue_splice_tail_init(&sd->input_pkt_queue, + &sd->process_queue); rps_unlock(sd); } local_irq_enable(); -- cgit v1.2.3 From 8844a00626c78c30e8cd757f2a048038f4983c53 Mon Sep 17 00:00:00 2001 From: Zhao Qiang Date: Tue, 1 Jul 2014 09:21:34 +0800 Subject: powerpc/ucc_geth: deal with a compile warning deal with a compile warning: comparison between 'enum qe_fltr_largest_external_tbl_lookup_key_size' and 'enum qe_fltr_tbl_lookup_key_size' the code: "if (ug_info->largestexternallookupkeysize == QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES)" is warned because different enum, so modify it. "enum qe_fltr_largest_external_tbl_lookup_key_size largestexternallookupkeysize; enum qe_fltr_tbl_lookup_key_size { QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES = 0x3f, /* LookupKey parsed by the Generate LookupKey CMD is truncated to 8 bytes */ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES = 0x5f, /* LookupKey parsed by the Generate LookupKey CMD is truncated to 16 bytes */ }; /* QE FLTR extended filtering Largest External Table Lookup Key Size */ enum qe_fltr_largest_external_tbl_lookup_key_size { QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE = 0x0,/* not used */ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */ };" Signed-off-by: Zhao Qiang Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/ucc_geth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c index fab39e295441..36fc429298e3 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.c +++ b/drivers/net/ethernet/freescale/ucc_geth.c @@ -2990,11 +2990,11 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth) if (ug_info->rxExtendedFiltering) { size += THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING; if (ug_info->largestexternallookupkeysize == - QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES) + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES) size += THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING_8; if (ug_info->largestexternallookupkeysize == - QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES) + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES) size += THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING_16; } -- cgit v1.2.3 From 26a9ebca982d52b96c921f7344b7c01b1e2d9672 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 7 Jul 2014 19:53:45 -0700 Subject: Revert "net: stmmac: add platform init/exit for Altera's ARM socfpga" This reverts commit 0acf16768740776feffac506ce93b1c06c059ac6. Breaks the build due to missing reference to phy_resume in the resulting dwmac-socfpga.o object. Signed-off-by: David S. Miller --- .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 69 ---------------------- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 -- 2 files changed, 73 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c index ec632e666c56..fd8a217556a1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c @@ -20,9 +20,7 @@ #include #include #include -#include #include -#include "stmmac.h" #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0 #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1 @@ -36,7 +34,6 @@ struct socfpga_dwmac { u32 reg_shift; struct device *dev; struct regmap *sys_mgr_base_addr; - struct reset_control *stmmac_rst; }; static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev) @@ -46,13 +43,6 @@ static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device * u32 reg_offset, reg_shift; int ret; - dwmac->stmmac_rst = devm_reset_control_get(dev, - STMMAC_RESOURCE_NAME); - if (IS_ERR(dwmac->stmmac_rst)) { - dev_info(dev, "Could not get reset control!\n"); - return -EINVAL; - } - dwmac->interface = of_get_phy_mode(np); sys_mgr_base_addr = syscon_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon"); @@ -135,65 +125,6 @@ static void *socfpga_dwmac_probe(struct platform_device *pdev) return dwmac; } -static void socfpga_dwmac_exit(struct platform_device *pdev, void *priv) -{ - struct socfpga_dwmac *dwmac = priv; - - /* On socfpga platform exit, assert and hold reset to the - * enet controller - the default state after a hard reset. - */ - if (dwmac->stmmac_rst) - reset_control_assert(dwmac->stmmac_rst); -} - -static int socfpga_dwmac_init(struct platform_device *pdev, void *priv) -{ - struct socfpga_dwmac *dwmac = priv; - struct net_device *ndev = platform_get_drvdata(pdev); - struct stmmac_priv *stpriv = NULL; - int ret = 0; - - if (ndev) - stpriv = netdev_priv(ndev); - - /* Assert reset to the enet controller before changing the phy mode */ - if (dwmac->stmmac_rst) - reset_control_assert(dwmac->stmmac_rst); - - /* Setup the phy mode in the system manager registers according to - * devicetree configuration - */ - ret = socfpga_dwmac_setup(dwmac); - - /* Deassert reset for the phy configuration to be sampled by - * the enet controller, and operation to start in requested mode - */ - if (dwmac->stmmac_rst) - reset_control_deassert(dwmac->stmmac_rst); - - /* Before the enet controller is suspended, the phy is suspended. - * This causes the phy clock to be gated. The enet controller is - * resumed before the phy, so the clock is still gated "off" when - * the enet controller is resumed. This code makes sure the phy - * is "resumed" before reinitializing the enet controller since - * the enet controller depends on an active phy clock to complete - * a DMA reset. A DMA reset will "time out" if executed - * with no phy clock input on the Synopsys enet controller. - * Verified through Synopsys Case #8000711656. - * - * Note that the phy clock is also gated when the phy is isolated. - * Phy "suspend" and "isolate" controls are located in phy basic - * control register 0, and can be modified by the phy driver - * framework. - */ - if (stpriv && stpriv->phydev) - phy_resume(stpriv->phydev); - - return ret; -} - const struct stmmac_of_data socfpga_gmac_data = { .setup = socfpga_dwmac_probe, - .init = socfpga_dwmac_init, - .exit = socfpga_dwmac_exit, }; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 18315f34938b..057a1208e594 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2878,10 +2878,6 @@ int stmmac_suspend(struct net_device *ndev) clk_disable_unprepare(priv->stmmac_clk); } spin_unlock_irqrestore(&priv->lock, flags); - - priv->oldlink = 0; - priv->speed = 0; - priv->oldduplex = -1; return 0; } -- cgit v1.2.3 From 797a816221655d7204c6a5536d1400c022b01939 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 12 Jun 2014 14:26:37 +1000 Subject: drm/gk104/ram: bash mpll bit 31 on Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/fb/ramnve0.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/ramnve0.c b/drivers/gpu/drm/nouveau/core/subdev/fb/ramnve0.c index 1ad3ea503133..c5b46e302319 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/fb/ramnve0.c +++ b/drivers/gpu/drm/nouveau/core/subdev/fb/ramnve0.c @@ -200,6 +200,7 @@ r1373f4_init(struct nve0_ramfuc *fuc) /* (re)program mempll, if required */ if (ram->mode == 2) { ram_mask(fuc, 0x1373f4, 0x00010000, 0x00000000); + ram_mask(fuc, 0x132000, 0x80000000, 0x80000000); ram_mask(fuc, 0x132000, 0x00000001, 0x00000000); ram_mask(fuc, 0x132004, 0x103fffff, mcoef); ram_mask(fuc, 0x132000, 0x00000001, 0x00000001); -- cgit v1.2.3 From 3c4be80bce681740d31646b8aff06d82ef453566 Mon Sep 17 00:00:00 2001 From: Stéphane Marchesin Date: Fri, 27 Jun 2014 13:17:25 -0700 Subject: drm/nouveau/fb: Prevent inlining of ramfuc_reg MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When gcc 4.8 inlines this function, it eats up 16 bytes on the stack every time. Eventually we hit warnings because our stack grew too much: ramnve0.c:1383:1: error: the frame size of 1496 bytes is larger than 1024 bytes We fix this by preventing inlining for this function. Signed-off-by: Stéphane Marchesin Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h b/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h index 0f57fcfe0bbf..04e38492e74a 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h +++ b/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h @@ -26,7 +26,7 @@ ramfuc_reg2(u32 addr1, u32 addr2) }; } -static inline struct ramfuc_reg +static noinline struct ramfuc_reg ramfuc_reg(u32 addr) { return ramfuc_reg2(addr, addr); -- cgit v1.2.3 From 276e526cfb257add928a57b196ea3e5c22b703ef Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 30 Jun 2014 11:10:02 +1000 Subject: drm/nv50-/kms: pass a non-zero value for head to sor dpms methods There's Apple machines out there which (probably completely arbitrarily) restrict each output path to a particular head. This causes us to not be able to locate the output data needed to power on/off the DP output correctly. We fix this by passing in a head index we know is valid (as opposed to "head 0"). Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_display.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index afdf607df3e6..4c534b7b04da 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -1741,7 +1741,8 @@ nv50_sor_dpms(struct drm_encoder *encoder, int mode) } } - mthd = (ffs(nv_encoder->dcb->sorconf.link) - 1) << 2; + mthd = (ffs(nv_encoder->dcb->heads) - 1) << 3; + mthd |= (ffs(nv_encoder->dcb->sorconf.link) - 1) << 2; mthd |= nv_encoder->or; if (nv_encoder->dcb->type == DCB_OUTPUT_DP) { -- cgit v1.2.3 From 028791bb7d662550c7435d38daeb1f0b88ed5b17 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 30 Jun 2014 13:04:14 +1000 Subject: drm/nouveau/kms: restore fbcon after display has been resumed Under some complicated circumstances (boot, suspend, resume, attach second display, suspend, resume, suspend, detach second display, resume, suspend, attach second display, resume), the fb_set_suspend() call can somehow result in a modeset being attempted before we're ready for it and things blow up in fun ways. Running display init first fixes the issue. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_drm.c | 17 +++++++++-------- drivers/gpu/drm/nouveau/nouveau_fbcon.c | 13 +++---------- drivers/gpu/drm/nouveau/nouveau_fbcon.h | 1 - 3 files changed, 12 insertions(+), 19 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index ddd83756b9a2..5425ffe3931d 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -652,12 +652,12 @@ int nouveau_pmops_resume(struct device *dev) ret = nouveau_do_resume(drm_dev); if (ret) return ret; - if (drm_dev->mode_config.num_crtc) - nouveau_fbcon_set_suspend(drm_dev, 0); - nouveau_fbcon_zfill_all(drm_dev); - if (drm_dev->mode_config.num_crtc) + if (drm_dev->mode_config.num_crtc) { nouveau_display_resume(drm_dev); + nouveau_fbcon_set_suspend(drm_dev, 0); + } + return 0; } @@ -683,11 +683,12 @@ static int nouveau_pmops_thaw(struct device *dev) ret = nouveau_do_resume(drm_dev); if (ret) return ret; - if (drm_dev->mode_config.num_crtc) - nouveau_fbcon_set_suspend(drm_dev, 0); - nouveau_fbcon_zfill_all(drm_dev); - if (drm_dev->mode_config.num_crtc) + + if (drm_dev->mode_config.num_crtc) { nouveau_display_resume(drm_dev); + nouveau_fbcon_set_suspend(drm_dev, 0); + } + return 0; } diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 64a42cfd3717..191665ee7f52 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -531,17 +531,10 @@ nouveau_fbcon_set_suspend(struct drm_device *dev, int state) if (state == 1) nouveau_fbcon_save_disable_accel(dev); fb_set_suspend(drm->fbcon->helper.fbdev, state); - if (state == 0) + if (state == 0) { nouveau_fbcon_restore_accel(dev); + nouveau_fbcon_zfill(dev, drm->fbcon); + } console_unlock(); } } - -void -nouveau_fbcon_zfill_all(struct drm_device *dev) -{ - struct nouveau_drm *drm = nouveau_drm(dev); - if (drm->fbcon) { - nouveau_fbcon_zfill(dev, drm->fbcon); - } -} diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.h b/drivers/gpu/drm/nouveau/nouveau_fbcon.h index fdfc0c94fbcc..fcff797d2084 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.h +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.h @@ -61,7 +61,6 @@ void nouveau_fbcon_gpu_lockup(struct fb_info *info); int nouveau_fbcon_init(struct drm_device *dev); void nouveau_fbcon_fini(struct drm_device *dev); void nouveau_fbcon_set_suspend(struct drm_device *dev, int state); -void nouveau_fbcon_zfill_all(struct drm_device *dev); void nouveau_fbcon_save_disable_accel(struct drm_device *dev); void nouveau_fbcon_restore_accel(struct drm_device *dev); -- cgit v1.2.3 From 0713b4510e62411071b748d786043cdaada56ce5 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 1 Jul 2014 10:54:52 +1000 Subject: drm/nouveau/dp: fix required link bandwidth calculations Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/disp/nv50.c | 6 +++--- drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c | 6 +++--- drivers/gpu/drm/nouveau/core/engine/disp/outpdp.c | 8 +++++--- 3 files changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c index 26e962b7e702..2283c442a10d 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c @@ -1516,11 +1516,11 @@ nv50_disp_intr_unk20_2(struct nv50_disp_priv *priv, int head) } switch ((ctrl & 0x000f0000) >> 16) { - case 6: datarate = pclk * 30 / 8; break; - case 5: datarate = pclk * 24 / 8; break; + case 6: datarate = pclk * 30; break; + case 5: datarate = pclk * 24; break; case 2: default: - datarate = pclk * 18 / 8; + datarate = pclk * 18; break; } diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c b/drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c index 48aa38a87e3f..fa30d8196f35 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c @@ -1159,11 +1159,11 @@ nvd0_disp_intr_unk2_2(struct nv50_disp_priv *priv, int head) if (outp->info.type == DCB_OUTPUT_DP) { u32 sync = nv_rd32(priv, 0x660404 + (head * 0x300)); switch ((sync & 0x000003c0) >> 6) { - case 6: pclk = pclk * 30 / 8; break; - case 5: pclk = pclk * 24 / 8; break; + case 6: pclk = pclk * 30; break; + case 5: pclk = pclk * 24; break; case 2: default: - pclk = pclk * 18 / 8; + pclk = pclk * 18; break; } diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/outpdp.c b/drivers/gpu/drm/nouveau/core/engine/disp/outpdp.c index 52c299c3d300..eb2d7789555d 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/outpdp.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/outpdp.c @@ -34,7 +34,7 @@ nvkm_output_dp_train(struct nvkm_output *base, u32 datarate, bool wait) struct nvkm_output_dp *outp = (void *)base; bool retrain = true; u8 link[2], stat[3]; - u32 rate; + u32 linkrate; int ret, i; /* check that the link is trained at a high enough rate */ @@ -44,8 +44,10 @@ nvkm_output_dp_train(struct nvkm_output *base, u32 datarate, bool wait) goto done; } - rate = link[0] * 27000 * (link[1] & DPCD_LC01_LANE_COUNT_SET); - if (rate < ((datarate / 8) * 10)) { + linkrate = link[0] * 27000 * (link[1] & DPCD_LC01_LANE_COUNT_SET); + linkrate = (linkrate * 8) / 10; /* 8B/10B coding overhead */ + datarate = (datarate + 9) / 10; /* -> decakilobits */ + if (linkrate < datarate) { DBG("link not trained at sufficient rate\n"); goto done; } -- cgit v1.2.3 From 7fac49337175f031d679f7ce0dab980ed6711237 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 3 Jul 2014 08:53:50 +1000 Subject: drm/nouveau/dp: workaround broken display The display in fdo#76483 pulses the hotplug line for link retraining after we cut power to the main link on the source, even while it's in D3. fdo#76483 Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/disp/sornv50.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/sornv50.c b/drivers/gpu/drm/nouveau/core/engine/disp/sornv50.c index e1832778e8b6..7a1ebdfa9e1b 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/sornv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/sornv50.c @@ -87,6 +87,7 @@ nv50_sor_mthd(struct nouveau_object *object, u32 mthd, void *args, u32 size) struct nvkm_output_dp *outpdp = (void *)outp; switch (data) { case NV94_DISP_SOR_DP_PWR_STATE_OFF: + nouveau_event_put(outpdp->irq); ((struct nvkm_output_dp_impl *)nv_oclass(outp)) ->lnk_pwr(outpdp, 0); atomic_set(&outpdp->lt.done, 0); -- cgit v1.2.3 From 0b4e8e7fd506d4ddb96f71230252d14066ce1597 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 8 Jul 2014 10:50:36 +1000 Subject: drm/nouveau/ram: fix test for gpio presence Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h b/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h index 04e38492e74a..2af9cfd2c60f 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h +++ b/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h @@ -107,7 +107,7 @@ ramfuc_nsec(struct ramfuc *ram, u32 nsec) #define ram_init(s,p) ramfuc_init(&(s)->base, (p)) #define ram_exec(s,e) ramfuc_exec(&(s)->base, (e)) -#define ram_have(s,r) ((s)->r_##r.addr != 0x000000) +#define ram_have(s,r) ((s)->r_##r.addr[0] != 0x000000) #define ram_rd32(s,r) ramfuc_rd32(&(s)->base, &(s)->r_##r) #define ram_wr32(s,r,d) ramfuc_wr32(&(s)->base, &(s)->r_##r, (d)) #define ram_nuke(s,r) ramfuc_nuke(&(s)->base, &(s)->r_##r) -- cgit v1.2.3 From 8dcb4b1526747d8431f9895e153dd478c9d16186 Mon Sep 17 00:00:00 2001 From: Bernd Wachter Date: Tue, 1 Jul 2014 22:01:09 +0300 Subject: net: qmi_wwan: Add ID for Telewell TW-LTE 4G v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There's a new version of the Telewell 4G modem working with, but not recognized by this driver. Signed-off-by: Bernd Wachter Acked-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index cf62d7e8329f..c4638c67f6b9 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -741,6 +741,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x19d2, 0x1424, 2)}, {QMI_FIXED_INTF(0x19d2, 0x1425, 2)}, {QMI_FIXED_INTF(0x19d2, 0x1426, 2)}, /* ZTE MF91 */ + {QMI_FIXED_INTF(0x19d2, 0x1428, 2)}, /* Telewell TW-LTE 4G v2 */ {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */ {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */ {QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */ -- cgit v1.2.3 From 54951194656e4853e441266fd095f880bc0398f3 Mon Sep 17 00:00:00 2001 From: Loic Prylli Date: Tue, 1 Jul 2014 21:39:43 -0700 Subject: net: Fix NETDEV_CHANGE notifier usage causing spurious arp flush A bug was introduced in NETDEV_CHANGE notifier sequence causing the arp table to be sometimes spuriously cleared (including manual arp entries marked permanent), upon network link carrier changes. The changed argument for the notifier was applied only to a single caller of NETDEV_CHANGE, missing among others netdev_state_change(). So upon net_carrier events induced by the network, which are triggering a call to netdev_state_change(), arp_netdev_event() would decide whether to clear or not arp cache based on random/junk stack values (a kind of read buffer overflow). Fixes: be9efd365328 ("net: pass changed flags along with NETDEV_CHANGE event") Fixes: 6c8b4e3ff81b ("arp: flush arp cache on IFF_NOARP change") Signed-off-by: Loic Prylli Signed-off-by: David S. Miller --- net/core/dev.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index 77c19c7bb490..7990984ca364 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -148,6 +148,9 @@ struct list_head ptype_all __read_mostly; /* Taps */ static struct list_head offload_base __read_mostly; static int netif_rx_internal(struct sk_buff *skb); +static int call_netdevice_notifiers_info(unsigned long val, + struct net_device *dev, + struct netdev_notifier_info *info); /* * The @dev_base_head list is protected by @dev_base_lock and the rtnl @@ -1207,7 +1210,11 @@ EXPORT_SYMBOL(netdev_features_change); void netdev_state_change(struct net_device *dev) { if (dev->flags & IFF_UP) { - call_netdevice_notifiers(NETDEV_CHANGE, dev); + struct netdev_notifier_change_info change_info; + + change_info.flags_changed = 0; + call_netdevice_notifiers_info(NETDEV_CHANGE, dev, + &change_info.info); rtmsg_ifinfo(RTM_NEWLINK, dev, 0, GFP_KERNEL); } } -- cgit v1.2.3 From 63288b721a80fb58c00cd47e61a90bc8b33ba588 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 7 Jul 2014 10:53:51 +0800 Subject: ARM: imx: fix shared gate clock Let's say clock A and B are two gate clocks that share the same register bit in hardware. Therefore they are registered as shared gate clocks with imx_clk_gate2_shared(). In a scenario that only clock A is enabled by clk_enable(A) while B is not used, the shared gate will be unexpectedly disabled in hardware. It happens because clk_enable(A) increments the share_count from 0 to 1, while clock B is unused to clock core, and therefore the core function will just disable B by calling clk->ops->disable() directly. The consequence of that call is share_count is decremented to 0 and the gate is disabled in hardware, even though clock A is still in use. The patch fixes the issue by initializing the share_count per hardware state and returns enable state per share_count from .is_enabled() hook, in case it's a shared gate. While at it, add a check in clk_gate2_disable() to ensure it's never called with a zero share_count. Reported-by: Fabio Estevam Fixes: f9f28cdf2167 ("ARM: imx: add shared gate clock support") Signed-off-by: Shawn Guo Tested-by: Fabio Estevam Signed-off-by: Olof Johansson --- arch/arm/mach-imx/clk-gate2.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index 4ba587da89d2..84acdfd1d715 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -67,8 +67,12 @@ static void clk_gate2_disable(struct clk_hw *hw) spin_lock_irqsave(gate->lock, flags); - if (gate->share_count && --(*gate->share_count) > 0) - goto out; + if (gate->share_count) { + if (WARN_ON(*gate->share_count == 0)) + goto out; + else if (--(*gate->share_count) > 0) + goto out; + } reg = readl(gate->reg); reg &= ~(3 << gate->bit_idx); @@ -78,19 +82,26 @@ out: spin_unlock_irqrestore(gate->lock, flags); } -static int clk_gate2_is_enabled(struct clk_hw *hw) +static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx) { - u32 reg; - struct clk_gate2 *gate = to_clk_gate2(hw); + u32 val = readl(reg); - reg = readl(gate->reg); - - if (((reg >> gate->bit_idx) & 1) == 1) + if (((val >> bit_idx) & 1) == 1) return 1; return 0; } +static int clk_gate2_is_enabled(struct clk_hw *hw) +{ + struct clk_gate2 *gate = to_clk_gate2(hw); + + if (gate->share_count) + return !!(*gate->share_count); + else + return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx); +} + static struct clk_ops clk_gate2_ops = { .enable = clk_gate2_enable, .disable = clk_gate2_disable, @@ -116,6 +127,10 @@ struct clk *clk_register_gate2(struct device *dev, const char *name, gate->bit_idx = bit_idx; gate->flags = clk_gate2_flags; gate->lock = lock; + + /* Initialize share_count per hardware state */ + if (share_count) + *share_count = clk_gate2_reg_is_enabled(reg, bit_idx) ? 1 : 0; gate->share_count = share_count; init.name = name; -- cgit v1.2.3 From 52ad353a5344f1f700c5b777175bdfa41d3cd65a Mon Sep 17 00:00:00 2001 From: dingtianhong Date: Wed, 2 Jul 2014 13:50:48 +0800 Subject: igmp: fix the problem when mc leave group The problem was triggered by these steps: 1) create socket, bind and then setsockopt for add mc group. mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37"); mreq.imr_interface.s_addr = inet_addr("192.168.1.2"); setsockopt(sockfd, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq)); 2) drop the mc group for this socket. mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37"); mreq.imr_interface.s_addr = inet_addr("0.0.0.0"); setsockopt(sockfd, IPPROTO_IP, IP_DROP_MEMBERSHIP, &mreq, sizeof(mreq)); 3) and then drop the socket, I found the mc group was still used by the dev: netstat -g Interface RefCnt Group --------------- ------ --------------------- eth2 1 255.0.0.37 Normally even though the IP_DROP_MEMBERSHIP return error, the mc group still need to be released for the netdev when drop the socket, but this process was broken when route default is NULL, the reason is that: The ip_mc_leave_group() will choose the in_dev by the imr_interface.s_addr, if input addr is NULL, the default route dev will be chosen, then the ifindex is got from the dev, then polling the inet->mc_list and return -ENODEV, but if the default route dev is NULL, the in_dev and ifIndex is both NULL, when polling the inet->mc_list, the mc group will be released from the mc_list, but the dev didn't dec the refcnt for this mc group, so when dropping the socket, the mc_list is NULL and the dev still keep this group. v1->v2: According Hideaki's suggestion, we should align with IPv6 (RFC3493) and BSDs, so I add the checking for the in_dev before polling the mc_list, make sure when we remove the mc group, dec the refcnt to the real dev which was using the mc address. The problem would never happened again. Signed-off-by: Ding Tianhong Signed-off-by: David S. Miller --- net/ipv4/igmp.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 6748d420f714..db710b059bab 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -1944,6 +1944,10 @@ int ip_mc_leave_group(struct sock *sk, struct ip_mreqn *imr) rtnl_lock(); in_dev = ip_mc_find_dev(net, imr); + if (!in_dev) { + ret = -ENODEV; + goto out; + } ifindex = imr->imr_ifindex; for (imlp = &inet->mc_list; (iml = rtnl_dereference(*imlp)) != NULL; @@ -1961,16 +1965,14 @@ int ip_mc_leave_group(struct sock *sk, struct ip_mreqn *imr) *imlp = iml->next_rcu; - if (in_dev) - ip_mc_dec_group(in_dev, group); + ip_mc_dec_group(in_dev, group); rtnl_unlock(); /* decrease mem now to avoid the memleak warning */ atomic_sub(sizeof(*iml), &sk->sk_omem_alloc); kfree_rcu(iml, rcu); return 0; } - if (!in_dev) - ret = -ENODEV; +out: rtnl_unlock(); return ret; } -- cgit v1.2.3 From e326f2f13b209d56782609e833b87cb497e64b3b Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Wed, 2 Jul 2014 17:36:23 +0300 Subject: net/mlx4_en: Don't configure the HW vxlan parser when vxlan offloading isn't set The add_vxlan_port ndo driver code was wrongly testing whether HW vxlan offloads are supported by the device instead of checking if they are currently enabled. This causes the driver to configure the HW parser to conduct matching for vxlan packets but since no steering rules were set, vxlan packets are dropped on RX. Fix that by doing the right test, as done in the del_vxlan_port ndo handler. Fixes: 1b136de ('net/mlx4: Implement vxlan ndo calls') Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 7d4fb7bf2593..e94d96f0ef55 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2336,7 +2336,7 @@ static void mlx4_en_add_vxlan_port(struct net_device *dev, struct mlx4_en_priv *priv = netdev_priv(dev); __be16 current_port; - if (!(priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_VXLAN_OFFLOADS)) + if (priv->mdev->dev->caps.tunnel_offload_mode != MLX4_TUNNEL_OFFLOAD_MODE_VXLAN) return; if (sa_family == AF_INET6) -- cgit v1.2.3 From 6e08d5e3c8236e7484229e46fdf92006e1dd4c49 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Wed, 2 Jul 2014 12:07:16 -0700 Subject: tcp: fix false undo corner cases The undo code assumes that, upon entering loss recovery, TCP 1) always retransmit something 2) the retransmission never fails locally (e.g., qdisc drop) so undo_marker is set in tcp_enter_recovery() and undo_retrans is incremented only when tcp_retransmit_skb() is successful. When the assumption is broken because TCP's cwnd is too small to retransmit or the retransmit fails locally. The next (DUP)ACK would incorrectly revert the cwnd and the congestion state in tcp_try_undo_dsack() or tcp_may_undo(). Subsequent (DUP)ACKs may enter the recovery state. The sender repeatedly enter and (incorrectly) exit recovery states if the retransmits continue to fail locally while receiving (DUP)ACKs. The fix is to initialize undo_retrans to -1 and start counting on the first retransmission. Always increment undo_retrans even if the retransmissions fail locally because they couldn't cause DSACKs to undo the cwnd reduction. Signed-off-by: Yuchung Cheng Signed-off-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 8 ++++---- net/ipv4/tcp_output.c | 6 ++++-- 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index b5c23756965a..40639c288dc2 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -1106,7 +1106,7 @@ static bool tcp_check_dsack(struct sock *sk, const struct sk_buff *ack_skb, } /* D-SACK for already forgotten data... Do dumb counting. */ - if (dup_sack && tp->undo_marker && tp->undo_retrans && + if (dup_sack && tp->undo_marker && tp->undo_retrans > 0 && !after(end_seq_0, prior_snd_una) && after(end_seq_0, tp->undo_marker)) tp->undo_retrans--; @@ -1187,7 +1187,7 @@ static u8 tcp_sacktag_one(struct sock *sk, /* Account D-SACK for retransmitted packet. */ if (dup_sack && (sacked & TCPCB_RETRANS)) { - if (tp->undo_marker && tp->undo_retrans && + if (tp->undo_marker && tp->undo_retrans > 0 && after(end_seq, tp->undo_marker)) tp->undo_retrans--; if (sacked & TCPCB_SACKED_ACKED) @@ -1893,7 +1893,7 @@ static void tcp_clear_retrans_partial(struct tcp_sock *tp) tp->lost_out = 0; tp->undo_marker = 0; - tp->undo_retrans = 0; + tp->undo_retrans = -1; } void tcp_clear_retrans(struct tcp_sock *tp) @@ -2665,7 +2665,7 @@ static void tcp_enter_recovery(struct sock *sk, bool ece_ack) tp->prior_ssthresh = 0; tp->undo_marker = tp->snd_una; - tp->undo_retrans = tp->retrans_out; + tp->undo_retrans = tp->retrans_out ? : -1; if (inet_csk(sk)->icsk_ca_state < TCP_CA_CWR) { if (!ece_ack) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index d92bce0ea24e..179b51e6bda3 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -2525,8 +2525,6 @@ int tcp_retransmit_skb(struct sock *sk, struct sk_buff *skb) if (!tp->retrans_stamp) tp->retrans_stamp = TCP_SKB_CB(skb)->when; - tp->undo_retrans += tcp_skb_pcount(skb); - /* snd_nxt is stored to detect loss of retransmitted segment, * see tcp_input.c tcp_sacktag_write_queue(). */ @@ -2534,6 +2532,10 @@ int tcp_retransmit_skb(struct sock *sk, struct sk_buff *skb) } else if (err != -EBUSY) { NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPRETRANSFAIL); } + + if (tp->undo_retrans < 0) + tp->undo_retrans = 0; + tp->undo_retrans += tcp_skb_pcount(skb); return err; } -- cgit v1.2.3 From 1d29a0722f6c38f79785c9ffb911730598de84e2 Mon Sep 17 00:00:00 2001 From: Jyri Sarha Date: Thu, 26 Jun 2014 22:20:52 +0300 Subject: ARM: OMAP2+: Remove non working OMAP HDMI audio initialization This code is not working currently and it can be removed. There is a conflict in sharing resources with the actual HDMI driver and with the ASoC HDMI audio DAI driver. Signed-off-by: Jyri Sarha Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 28 ---------------------------- 1 file changed, 28 deletions(-) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 592ba0a0ecf3..b6f8f348296e 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -297,33 +297,6 @@ static void omap_init_audio(void) static inline void omap_init_audio(void) {} #endif -#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \ - defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE) - -static struct platform_device omap_hdmi_audio = { - .name = "omap-hdmi-audio", - .id = -1, -}; - -static void __init omap_init_hdmi_audio(void) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - - oh = omap_hwmod_lookup("dss_hdmi"); - if (!oh) - return; - - pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0); - WARN(IS_ERR(pdev), - "Can't build omap_device for omap-hdmi-audio-dai.\n"); - - platform_device_register(&omap_hdmi_audio); -} -#else -static inline void omap_init_hdmi_audio(void) {} -#endif - #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include @@ -459,7 +432,6 @@ static int __init omap2_init_devices(void) */ omap_init_audio(); omap_init_camera(); - omap_init_hdmi_audio(); omap_init_mbox(); /* If dtb is there, the devices will be created dynamically */ if (!of_have_populated_dt()) { -- cgit v1.2.3 From 16927776ae757d0d132bdbfabbfe2c498342bd59 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Mon, 7 Jul 2014 14:06:11 -0700 Subject: alarmtimer: Fix bug where relative alarm timers were treated as absolute Sharvil noticed with the posix timer_settime interface, using the CLOCK_REALTIME_ALARM or CLOCK_BOOTTIME_ALARM clockid, if the users tried to specify a relative time timer, it would incorrectly be treated as absolute regardless of the state of the flags argument. This patch corrects this, properly checking the absolute/relative flag, as well as adds further error checking that no invalid flag bits are set. Reported-by: Sharvil Nanavati Signed-off-by: John Stultz Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Prarit Bhargava Cc: Sharvil Nanavati Cc: stable #3.0+ Link: http://lkml.kernel.org/r/1404767171-6902-1-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- kernel/time/alarmtimer.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c index 88c9c65a430d..fe75444ae7ec 100644 --- a/kernel/time/alarmtimer.c +++ b/kernel/time/alarmtimer.c @@ -585,9 +585,14 @@ static int alarm_timer_set(struct k_itimer *timr, int flags, struct itimerspec *new_setting, struct itimerspec *old_setting) { + ktime_t exp; + if (!rtcdev) return -ENOTSUPP; + if (flags & ~TIMER_ABSTIME) + return -EINVAL; + if (old_setting) alarm_timer_get(timr, old_setting); @@ -597,8 +602,16 @@ static int alarm_timer_set(struct k_itimer *timr, int flags, /* start the timer */ timr->it.alarm.interval = timespec_to_ktime(new_setting->it_interval); - alarm_start(&timr->it.alarm.alarmtimer, - timespec_to_ktime(new_setting->it_value)); + exp = timespec_to_ktime(new_setting->it_value); + /* Convert (if necessary) to absolute time */ + if (flags != TIMER_ABSTIME) { + ktime_t now; + + now = alarm_bases[timr->it.alarm.alarmtimer.type].gettime(); + exp = ktime_add(now, exp); + } + + alarm_start(&timr->it.alarm.alarmtimer, exp); return 0; } @@ -730,6 +743,9 @@ static int alarm_timer_nsleep(const clockid_t which_clock, int flags, if (!alarmtimer_get_rtcdev()) return -ENOTSUPP; + if (flags & ~TIMER_ABSTIME) + return -EINVAL; + if (!capable(CAP_WAKE_ALARM)) return -EPERM; -- cgit v1.2.3 From 91947d8cc553b3147140334a295218499b77ea92 Mon Sep 17 00:00:00 2001 From: Aaron Plattner Date: Tue, 8 Jul 2014 00:21:38 -0700 Subject: ALSA: hda - Add new GPU codec ID 0x10de0070 to snd-hda Vendor ID 0x10de0070 is used by a yet-to-be-named GPU chip. Signed-off-by: Aaron Plattner Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 4fe876b65fda..ba4ca52072ff 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -3337,6 +3337,7 @@ static const struct hda_codec_preset snd_hda_preset_hdmi[] = { { .id = 0x10de0051, .name = "GPU 51 HDMI/DP", .patch = patch_nvhdmi }, { .id = 0x10de0060, .name = "GPU 60 HDMI/DP", .patch = patch_nvhdmi }, { .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch }, +{ .id = 0x10de0070, .name = "GPU 70 HDMI/DP", .patch = patch_nvhdmi }, { .id = 0x10de0071, .name = "GPU 71 HDMI/DP", .patch = patch_nvhdmi }, { .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi_2ch }, { .id = 0x11069f80, .name = "VX900 HDMI/DP", .patch = patch_via_hdmi }, @@ -3394,6 +3395,7 @@ MODULE_ALIAS("snd-hda-codec-id:10de0044"); MODULE_ALIAS("snd-hda-codec-id:10de0051"); MODULE_ALIAS("snd-hda-codec-id:10de0060"); MODULE_ALIAS("snd-hda-codec-id:10de0067"); +MODULE_ALIAS("snd-hda-codec-id:10de0070"); MODULE_ALIAS("snd-hda-codec-id:10de0071"); MODULE_ALIAS("snd-hda-codec-id:10de8001"); MODULE_ALIAS("snd-hda-codec-id:11069f80"); -- cgit v1.2.3 From 0d461e1b087048b0cc37c9d7b351649578c507b4 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Fri, 4 Jul 2014 16:22:16 +0200 Subject: ARM: mvebu: Fix the operand list in the inline asm of armada_370_xp_pmsu_idle_enter In the inline asm part of the function armada_370_xp_pmsu_idle_enter() the input operand was used. The intent here was to let the compiler choose this register so it could do the optimization it needed. However an input operand is not supposed to be modified by the inline asm code. This can lead to improper generated instructions. In some case generated instruction the compiler made the choice to reuse the same register to store the return value. But in the assembly part this register was modified, so it can lead to return an wrong value. The fix is to use a clobber. Thanks to this the compiler will know that the value of this register will be modified. Signed-off-by: Gregory CLEMENT Reviewed-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1404483736-16938-1-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/pmsu.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index a1d407c0febe..25aa8237d668 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -201,12 +201,12 @@ static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle) /* Test the CR_C bit and set it if it was cleared */ asm volatile( - "mrc p15, 0, %0, c1, c0, 0 \n\t" - "tst %0, #(1 << 2) \n\t" - "orreq %0, %0, #(1 << 2) \n\t" - "mcreq p15, 0, %0, c1, c0, 0 \n\t" + "mrc p15, 0, r0, c1, c0, 0 \n\t" + "tst r0, #(1 << 2) \n\t" + "orreq r0, r0, #(1 << 2) \n\t" + "mcreq p15, 0, r0, c1, c0, 0 \n\t" "isb " - : : "r" (0)); + : : : "r0"); pr_warn("Failed to suspend the system\n"); -- cgit v1.2.3 From a728b977429383b3fe92b6e3bff9e69365609e0f Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Tue, 8 Jul 2014 10:37:37 -0300 Subject: ARM: mvebu: Fix coherency bus notifiers by using separate notifiers Currently, the coherency fabric support registers two bus notifiers; one for platform, one for pci bus types, with the same notifier block. However, this is illegal and can cause serious issues: the notifier block is also a link in the notifier list and cannot be inserted twice. This commit fixes this by using different notifier blocks (with the same notifier callback) to set the platform and pci bus types notifiers. Fixes: b0063aad5dd8 ("ARM: mvebu: use hardware I/O coherency also for PCI devices") Reported-by: Paolo Pisati Signed-off-by: Ezequiel Garcia Link: https://lkml.kernel.org/r/1404826657-6977-1-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/coherency.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index 477202fd39cc..2bdc3233abe2 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -292,6 +292,10 @@ static struct notifier_block mvebu_hwcc_nb = { .notifier_call = mvebu_hwcc_notifier, }; +static struct notifier_block mvebu_hwcc_pci_nb = { + .notifier_call = mvebu_hwcc_notifier, +}; + static void __init armada_370_coherency_init(struct device_node *np) { struct resource res; @@ -427,7 +431,7 @@ static int __init coherency_pci_init(void) { if (coherency_available()) bus_register_notifier(&pci_bus_type, - &mvebu_hwcc_nb); + &mvebu_hwcc_pci_nb); return 0; } -- cgit v1.2.3 From 39e0ee9964b1245b79ec89f6b89d8ec4ef672524 Mon Sep 17 00:00:00 2001 From: Suman Tripathi Date: Mon, 7 Jul 2014 22:33:04 +0530 Subject: libahci: export ahci_qc_issue() and ahci_start_fix_rx() The subsequent patch will make use of them. Signed-off-by: Loc Ho Signed-off-by: Suman Tripathi Signed-off-by: Tejun Heo --- drivers/ata/ahci.h | 2 ++ drivers/ata/libahci.c | 7 ++++--- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 05882e4445a6..5513296e5e2e 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -371,7 +371,9 @@ int ahci_do_softreset(struct ata_link *link, unsigned int *class, int pmp, unsigned long deadline, int (*check_ready)(struct ata_link *link)); +unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); int ahci_stop_engine(struct ata_port *ap); +void ahci_start_fis_rx(struct ata_port *ap); void ahci_start_engine(struct ata_port *ap); int ahci_check_ready(struct ata_link *link); int ahci_kick_engine(struct ata_port *ap); diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 40ea583d3610..d72ce0470309 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -68,7 +68,6 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); -static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc); static int ahci_port_start(struct ata_port *ap); static void ahci_port_stop(struct ata_port *ap); @@ -620,7 +619,7 @@ int ahci_stop_engine(struct ata_port *ap) } EXPORT_SYMBOL_GPL(ahci_stop_engine); -static void ahci_start_fis_rx(struct ata_port *ap) +void ahci_start_fis_rx(struct ata_port *ap) { void __iomem *port_mmio = ahci_port_base(ap); struct ahci_host_priv *hpriv = ap->host->private_data; @@ -646,6 +645,7 @@ static void ahci_start_fis_rx(struct ata_port *ap) /* flush */ readl(port_mmio + PORT_CMD); } +EXPORT_SYMBOL_GPL(ahci_start_fis_rx); static int ahci_stop_fis_rx(struct ata_port *ap) { @@ -1945,7 +1945,7 @@ irqreturn_t ahci_interrupt(int irq, void *dev_instance) } EXPORT_SYMBOL_GPL(ahci_interrupt); -static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) +unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; void __iomem *port_mmio = ahci_port_base(ap); @@ -1974,6 +1974,7 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) return 0; } +EXPORT_SYMBOL_GPL(ahci_qc_issue); static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc) { -- cgit v1.2.3 From 2a0bdff6b958d1b2523d2754b6cd5e0ea4053016 Mon Sep 17 00:00:00 2001 From: Suman Tripathi Date: Mon, 7 Jul 2014 22:33:05 +0530 Subject: ahci_xgene: fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command. This patch fixes the dma state machine lockup due to the processing of IDENTIFY DEVICE PIO mode command. The X-Gene AHCI controller has an errata in which it cannot clear the BSY bit after the PIO setup FIS. The dma state machine enters CMFatalErrorUpdate state and locks up. This patch also removes the dma restart workaround from the read_id function as the read_id function is only called by libata layer for ATA_INTERNAL commands. But for some cases eg: PORT MULTIPLIER and udev, the framework will enumerate using SCSI commands and it will not call read_id function. Signed-off-by: Loc Ho Signed-off-by: Suman Tripathi Signed-off-by: Tejun Heo --- drivers/ata/ahci_xgene.c | 60 +++++++++++++++++++++++++++++++++++++----------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c index 042a9bb45c86..ee3a3659bd9e 100644 --- a/drivers/ata/ahci_xgene.c +++ b/drivers/ata/ahci_xgene.c @@ -78,6 +78,7 @@ struct xgene_ahci_context { struct ahci_host_priv *hpriv; struct device *dev; + u8 last_cmd[MAX_AHCI_CHN_PERCTR]; /* tracking the last command issued*/ void __iomem *csr_core; /* Core CSR address of IP */ void __iomem *csr_diag; /* Diag CSR address of IP */ void __iomem *csr_axi; /* AXI CSR address of IP */ @@ -97,6 +98,50 @@ static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx) return 0; } +/** + * xgene_ahci_restart_engine - Restart the dma engine. + * @ap : ATA port of interest + * + * Restarts the dma engine inside the controller. + */ +static int xgene_ahci_restart_engine(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + + ahci_stop_engine(ap); + ahci_start_fis_rx(ap); + hpriv->start_engine(ap); + + return 0; +} + +/** + * xgene_ahci_qc_issue - Issue commands to the device + * @qc: Command to issue + * + * Due to Hardware errata for IDENTIFY DEVICE command, the controller cannot + * clear the BSY bit after receiving the PIO setup FIS. This results in the dma + * state machine goes into the CMFatalErrorUpdate state and locks up. By + * restarting the dma engine, it removes the controller out of lock up state. + */ +static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ahci_host_priv *hpriv = ap->host->private_data; + struct xgene_ahci_context *ctx = hpriv->plat_data; + int rc = 0; + + if (unlikely(ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA)) + xgene_ahci_restart_engine(ap); + + rc = ahci_qc_issue(qc); + + /* Save the last command issued */ + ctx->last_cmd[ap->port_no] = qc->tf.command; + + return rc; +} + /** * xgene_ahci_read_id - Read ID data from the specified device * @dev: device @@ -104,14 +149,12 @@ static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx) * @id: data buffer * * This custom read ID function is required due to the fact that the HW - * does not support DEVSLP and the controller state machine may get stuck - * after processing the ID query command. + * does not support DEVSLP. */ static unsigned int xgene_ahci_read_id(struct ata_device *dev, struct ata_taskfile *tf, u16 *id) { u32 err_mask; - void __iomem *port_mmio = ahci_port_base(dev->link->ap); err_mask = ata_do_dev_read_id(dev, tf, id); if (err_mask) @@ -133,16 +176,6 @@ static unsigned int xgene_ahci_read_id(struct ata_device *dev, */ id[ATA_ID_FEATURE_SUPP] &= ~(1 << 8); - /* - * Due to HW errata, restart the port if no other command active. - * Otherwise the controller may get stuck. - */ - if (!readl(port_mmio + PORT_CMD_ISSUE)) { - writel(PORT_CMD_FIS_RX, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* Force a barrier */ - writel(PORT_CMD_FIS_RX | PORT_CMD_START, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* Force a barrier */ - } return 0; } @@ -300,6 +333,7 @@ static struct ata_port_operations xgene_ahci_ops = { .host_stop = xgene_ahci_host_stop, .hardreset = xgene_ahci_hardreset, .read_id = xgene_ahci_read_id, + .qc_issue = xgene_ahci_qc_issue, }; static const struct ata_port_info xgene_ahci_port_info = { -- cgit v1.2.3 From bec7cedc8a92bfe96d32febe72634b30c63896bd Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Tue, 17 Jun 2014 18:14:26 +0100 Subject: arm64: export __cpu_{clear,copy}_user_page functions The __cpu_clear_user_page() and __cpu_copy_user_page() functions are not currently exported. This prevents modules from using clear_user_page() and copy_user_page(). Signed-off-by: Mark Salter Signed-off-by: Catalin Marinas --- arch/arm64/mm/copypage.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/mm/copypage.c b/arch/arm64/mm/copypage.c index 9aecbace4128..13bbc3be6f5a 100644 --- a/arch/arm64/mm/copypage.c +++ b/arch/arm64/mm/copypage.c @@ -27,8 +27,10 @@ void __cpu_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr) copy_page(kto, kfrom); __flush_dcache_area(kto, PAGE_SIZE); } +EXPORT_SYMBOL_GPL(__cpu_copy_user_page); void __cpu_clear_user_page(void *kaddr, unsigned long vaddr) { clear_page(kaddr); } +EXPORT_SYMBOL_GPL(__cpu_clear_user_page); -- cgit v1.2.3 From fa2ec3ea10bd377f9d55772b1dab65178425a1a2 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Wed, 18 Jun 2014 21:10:09 +0100 Subject: arm64: implement TASK_SIZE_OF include/linux/sched.h implements TASK_SIZE_OF as TASK_SIZE if it is not set by the architecture headers. TASK_SIZE uses the current task to determine the size of the virtual address space. On a 64-bit kernel this will cause reading /proc/pid/pagemap of a 64-bit process from a 32-bit process to return EOF when it reads past 0xffffffff. Implement TASK_SIZE_OF exactly the same as TASK_SIZE with test_tsk_thread_flag instead of test_thread_flag. Cc: stable@vger.kernel.org Signed-off-by: Colin Cross Acked-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/memory.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index 993bce527b85..902eb708804a 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -56,6 +56,8 @@ #define TASK_SIZE_32 UL(0x100000000) #define TASK_SIZE (test_thread_flag(TIF_32BIT) ? \ TASK_SIZE_32 : TASK_SIZE_64) +#define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk, TIF_32BIT) ? \ + TASK_SIZE_32 : TASK_SIZE_64) #else #define TASK_SIZE TASK_SIZE_64 #endif /* CONFIG_COMPAT */ -- cgit v1.2.3 From f50b407653f64e76d1c9abda61d0d85cde3ca9ca Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 2 Jul 2014 16:09:14 +0100 Subject: xen-netfront: don't nest queue locks in xennet_connect() The nesting of the per-queue rx_lock and tx_lock in xennet_connect() is confusing to both humans and lockdep. The locking is safe because this is the only place where the locks are nested in this way but lockdep still warns. Instead of adding the missing lockdep annotations, refactor the locking to avoid the confusing nesting. This is still safe, because the xenbus connection state changes are all serialized by the xenwatch thread. Signed-off-by: David Vrabel Reported-by: Sander Eikelenboom Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 2ccb4a02368b..6a37d62de40b 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -2046,13 +2046,15 @@ static int xennet_connect(struct net_device *dev) /* By now, the queue structures have been set up */ for (j = 0; j < num_queues; ++j) { queue = &np->queues[j]; - spin_lock_bh(&queue->rx_lock); - spin_lock_irq(&queue->tx_lock); /* Step 1: Discard all pending TX packet fragments. */ + spin_lock_irq(&queue->tx_lock); xennet_release_tx_bufs(queue); + spin_unlock_irq(&queue->tx_lock); /* Step 2: Rebuild the RX buffer freelist and the RX ring itself. */ + spin_lock_bh(&queue->rx_lock); + for (requeue_idx = 0, i = 0; i < NET_RX_RING_SIZE; i++) { skb_frag_t *frag; const struct page *page; @@ -2076,6 +2078,8 @@ static int xennet_connect(struct net_device *dev) } queue->rx.req_prod_pvt = requeue_idx; + + spin_unlock_bh(&queue->rx_lock); } /* @@ -2087,13 +2091,17 @@ static int xennet_connect(struct net_device *dev) netif_carrier_on(np->netdev); for (j = 0; j < num_queues; ++j) { queue = &np->queues[j]; + notify_remote_via_irq(queue->tx_irq); if (queue->tx_irq != queue->rx_irq) notify_remote_via_irq(queue->rx_irq); - xennet_tx_buf_gc(queue); - xennet_alloc_rx_buffers(queue); + spin_lock_irq(&queue->tx_lock); + xennet_tx_buf_gc(queue); spin_unlock_irq(&queue->tx_lock); + + spin_lock_bh(&queue->rx_lock); + xennet_alloc_rx_buffers(queue); spin_unlock_bh(&queue->rx_lock); } -- cgit v1.2.3 From f9feb1e6a25f9e197f9e6e6cb04bf04d2cccff93 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 2 Jul 2014 16:09:15 +0100 Subject: xen-netfront: call netif_carrier_off() only once when disconnecting In xennet_disconnect_backend(), netif_carrier_off() was called once per queue when it needs to only be called once. The queue locking around the netif_carrier_off() call looked very odd. I think they were supposed to synchronize any NAPI instances with the expectation that no further NAPI instances would be scheduled because of the carrier being off (see the check in xennet_rx_interrupt()). But I can't easily tell if this works correctly. Instead, add a napi_synchronize() call after disabling the interrupts. This is obviously correct as with no Rx interrupts, no further NAPI instances will be scheduled. Signed-off-by: David Vrabel Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 6a37d62de40b..055222bae6e4 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1439,16 +1439,11 @@ static void xennet_disconnect_backend(struct netfront_info *info) unsigned int i = 0; unsigned int num_queues = info->netdev->real_num_tx_queues; + netif_carrier_off(info->netdev); + for (i = 0; i < num_queues; ++i) { struct netfront_queue *queue = &info->queues[i]; - /* Stop old i/f to prevent errors whilst we rebuild the state. */ - spin_lock_bh(&queue->rx_lock); - spin_lock_irq(&queue->tx_lock); - netif_carrier_off(queue->info->netdev); - spin_unlock_irq(&queue->tx_lock); - spin_unlock_bh(&queue->rx_lock); - if (queue->tx_irq && (queue->tx_irq == queue->rx_irq)) unbind_from_irqhandler(queue->tx_irq, queue); if (queue->tx_irq && (queue->tx_irq != queue->rx_irq)) { @@ -1458,6 +1453,8 @@ static void xennet_disconnect_backend(struct netfront_info *info) queue->tx_evtchn = queue->rx_evtchn = 0; queue->tx_irq = queue->rx_irq = 0; + napi_synchronize(&queue->napi); + /* End access and free the pages */ xennet_end_access(queue->tx_ring_ref, queue->tx.sring); xennet_end_access(queue->rx_ring_ref, queue->rx.sring); -- cgit v1.2.3 From 74adf83f5d7720925499b4938f930591f947b660 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 18 Jun 2014 11:07:03 +0200 Subject: nfs: only show Posix ACLs in listxattr if actually present The big ACL switched nfs to use generic_listxattr, which calls all existing ->list handlers. Add a custom .listxattr implementation that only lists the ACLs if they actually are present on the given inode. Signed-off-by: Christoph Hellwig Reported-by: Philippe Troin Tested-by: Philippe Troin Fixes: 013cdf1088d7 (nfs: use generic posix ACL infrastructure ...) Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Trond Myklebust --- fs/nfs/nfs3acl.c | 43 +++++++++++++++++++++++++++++++++++++++++++ fs/nfs/nfs3proc.c | 4 ++-- 2 files changed, 45 insertions(+), 2 deletions(-) diff --git a/fs/nfs/nfs3acl.c b/fs/nfs/nfs3acl.c index 871d6eda8dba..8f854dde4150 100644 --- a/fs/nfs/nfs3acl.c +++ b/fs/nfs/nfs3acl.c @@ -247,3 +247,46 @@ const struct xattr_handler *nfs3_xattr_handlers[] = { &posix_acl_default_xattr_handler, NULL, }; + +static int +nfs3_list_one_acl(struct inode *inode, int type, const char *name, void *data, + size_t size, ssize_t *result) +{ + struct posix_acl *acl; + char *p = data + *result; + + acl = get_acl(inode, type); + if (!acl) + return 0; + + posix_acl_release(acl); + + *result += strlen(name); + *result += 1; + if (!size) + return 0; + if (*result > size) + return -ERANGE; + + strcpy(p, name); + return 0; +} + +ssize_t +nfs3_listxattr(struct dentry *dentry, char *data, size_t size) +{ + struct inode *inode = dentry->d_inode; + ssize_t result = 0; + int error; + + error = nfs3_list_one_acl(inode, ACL_TYPE_ACCESS, + POSIX_ACL_XATTR_ACCESS, data, size, &result); + if (error) + return error; + + error = nfs3_list_one_acl(inode, ACL_TYPE_DEFAULT, + POSIX_ACL_XATTR_DEFAULT, data, size, &result); + if (error) + return error; + return result; +} diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c index e7daa42bbc86..f0afa291fd58 100644 --- a/fs/nfs/nfs3proc.c +++ b/fs/nfs/nfs3proc.c @@ -885,7 +885,7 @@ static const struct inode_operations nfs3_dir_inode_operations = { .getattr = nfs_getattr, .setattr = nfs_setattr, #ifdef CONFIG_NFS_V3_ACL - .listxattr = generic_listxattr, + .listxattr = nfs3_listxattr, .getxattr = generic_getxattr, .setxattr = generic_setxattr, .removexattr = generic_removexattr, @@ -899,7 +899,7 @@ static const struct inode_operations nfs3_file_inode_operations = { .getattr = nfs_getattr, .setattr = nfs_setattr, #ifdef CONFIG_NFS_V3_ACL - .listxattr = generic_listxattr, + .listxattr = nfs3_listxattr, .getxattr = generic_getxattr, .setxattr = generic_setxattr, .removexattr = generic_removexattr, -- cgit v1.2.3 From baa3c65298c089a9014b4e523a14ec2885cca1bc Mon Sep 17 00:00:00 2001 From: Jan Kardell Date: Thu, 6 Nov 2014 22:18:00 +0000 Subject: iio: ti_am335x_adc: Fix: Use same step id at FIFOs both ends Since AI lines could be selected at will (linux-3.11) the sending and receiving ends of the FIFO does not agree about what step is used for a line. It only works if the last lines are used, like 5,6,7, and fails if ie 2,4,6 is selected in DT. Signed-off-by: Jan Kardell Tested-by: Zubair Lutfullah Signed-off-by: Jonathan Cameron Cc: stable@vger.kernel.org --- drivers/iio/adc/ti_am335x_adc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index a4db3026bec6..d5dc4c6ce86c 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -374,7 +374,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev, return -EAGAIN; } } - map_val = chan->channel + TOTAL_CHANNELS; + map_val = adc_dev->channel_step[chan->scan_index]; /* * We check the complete FIFO. We programmed just one entry but in case -- cgit v1.2.3 From b6e195fd4f663a7a97183feddb4ec27f0a5a00ec Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 3 Jul 2014 23:13:19 +0200 Subject: MAINTAINERS: change IEEE 802.15.4 maintainer This patch changes the IEEE 802.15.4 subsystem maintainer to Alexander Aring. We discussed this change before via e-mail and I collected the acks from the current maintainers. Signed-off-by: Alexander Aring Acked-by: Dmitry Eremin-Solenikov Acked-by: Alexander Smirnov Signed-off-by: David S. Miller --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index ebc812827c63..23863ce06996 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4476,8 +4476,7 @@ S: Supported F: drivers/idle/i7300_idle.c IEEE 802.15.4 SUBSYSTEM -M: Alexander Smirnov -M: Dmitry Eremin-Solenikov +M: Alexander Aring L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers) W: http://apps.sourceforge.net/trac/linux-zigbee T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git -- cgit v1.2.3 From a97e8027b1d28eafe6bafe062556c1ec926a49c6 Mon Sep 17 00:00:00 2001 From: Matthias Brugger Date: Thu, 3 Jul 2014 13:58:52 +0200 Subject: irqchip: gic: Add support for cortex a7 compatible string Patch 0a68214b "ARM: DT: Add binding for GIC virtualization extentions (VGIC)" added the "arm,cortex-a7-gic" compatible string, but the corresponding IRQCHIP_DECLARE was never added to the gic driver. To let real Cortex-A7 SoCs use it, add the necessary declaration to the device driver. Signed-off-by: Matthias Brugger Link: https://lkml.kernel.org/r/1404388732-28890-1-git-send-email-matthias.bgg@gmail.com Fixes: 0a68214b76ca ("ARM: DT: Add binding for GIC virtualization extentions (VGIC)") Cc: # v3.5+ Signed-off-by: Jason Cooper --- drivers/irqchip/irq-gic.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index 7e11c9d6ae8c..aadd6f5723cb 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -1073,6 +1073,7 @@ gic_of_init(struct device_node *node, struct device_node *parent) } IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init); IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init); +IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init); IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init); IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init); -- cgit v1.2.3 From 29322d0db98e5a84f5cc6a55655bee3dc4ffb5ab Mon Sep 17 00:00:00 2001 From: Jon Paul Maloy Date: Sat, 5 Jul 2014 13:44:13 -0400 Subject: tipc: fix bug in multicast/broadcast message reassembly Since commit 37e22164a8a3c39bdad45aa463b1e69a1fdf4110 ("tipc: rename and move message reassembly function") reassembly of long broadcast messages has been broken. This is because we test for a non-NULL return value of the *buf parameter as criteria for succesful reassembly. However, this parameter is left defined even after reception of the first fragment, when reassebly is still incomplete. This leads to a kernel crash as soon as a the first fragment of a long broadcast message is received. We fix this with this commit, by implementing a stricter behavior of the function and its return values. This commit should be applied to both net and net-next. Signed-off-by: Jon Maloy Acked-by: Ying Xue Signed-off-by: David S. Miller --- net/tipc/msg.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/net/tipc/msg.c b/net/tipc/msg.c index 8be6e94a1ca9..0a37a472c29f 100644 --- a/net/tipc/msg.c +++ b/net/tipc/msg.c @@ -101,9 +101,11 @@ int tipc_msg_build(struct tipc_msg *hdr, struct iovec const *msg_sect, } /* tipc_buf_append(): Append a buffer to the fragment list of another buffer - * Let first buffer become head buffer - * Returns 1 and sets *buf to headbuf if chain is complete, otherwise 0 - * Leaves headbuf pointer at NULL if failure + * @*headbuf: in: NULL for first frag, otherwise value returned from prev call + * out: set when successful non-complete reassembly, otherwise NULL + * @*buf: in: the buffer to append. Always defined + * out: head buf after sucessful complete reassembly, otherwise NULL + * Returns 1 when reassembly complete, otherwise 0 */ int tipc_buf_append(struct sk_buff **headbuf, struct sk_buff **buf) { @@ -122,6 +124,7 @@ int tipc_buf_append(struct sk_buff **headbuf, struct sk_buff **buf) goto out_free; head = *headbuf = frag; skb_frag_list_init(head); + *buf = NULL; return 0; } if (!head) @@ -150,5 +153,7 @@ int tipc_buf_append(struct sk_buff **headbuf, struct sk_buff **buf) out_free: pr_warn_ratelimited("Unable to build fragment list\n"); kfree_skb(*buf); + kfree_skb(*headbuf); + *buf = *headbuf = NULL; return 0; } -- cgit v1.2.3 From 85b722d760f0de77c4bb371b77202784671f5a54 Mon Sep 17 00:00:00 2001 From: Rickard Strandqvist Date: Sun, 6 Jul 2014 14:04:37 +0200 Subject: isdn: hisax: l3ni1.c: Fix for possible null pointer dereference There is otherwise a risk of a possible null pointer dereference. Was largely found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist --- drivers/isdn/hisax/l3ni1.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/isdn/hisax/l3ni1.c b/drivers/isdn/hisax/l3ni1.c index 0df6691d045c..8dc791bfaa6f 100644 --- a/drivers/isdn/hisax/l3ni1.c +++ b/drivers/isdn/hisax/l3ni1.c @@ -2059,13 +2059,17 @@ static int l3ni1_cmd_global(struct PStack *st, isdn_ctrl *ic) memcpy(p, ic->parm.ni1_io.data, ic->parm.ni1_io.datalen); /* copy data */ l = (p - temp) + ic->parm.ni1_io.datalen; /* total length */ - if (ic->parm.ni1_io.timeout > 0) - if (!(pc = ni1_new_l3_process(st, -1))) - { free_invoke_id(st, id); + if (ic->parm.ni1_io.timeout > 0) { + pc = ni1_new_l3_process(st, -1); + if (!pc) { + free_invoke_id(st, id); return (-2); } - pc->prot.ni1.ll_id = ic->parm.ni1_io.ll_id; /* remember id */ - pc->prot.ni1.proc = ic->parm.ni1_io.proc; /* and procedure */ + /* remember id */ + pc->prot.ni1.ll_id = ic->parm.ni1_io.ll_id; + /* and procedure */ + pc->prot.ni1.proc = ic->parm.ni1_io.proc; + } if (!(skb = l3_alloc_skb(l))) { free_invoke_id(st, id); -- cgit v1.2.3 From 233b43010330ed8cf39cf636880017df3e33f102 Mon Sep 17 00:00:00 2001 From: Hariprasad S Date: Mon, 23 Jun 2014 19:12:35 +0530 Subject: RDMA/cxgb4: Fix skb_leak in reject_cr() Based on origninal work by Steve Wise Signed-off-by: Steve Wise Signed-off-by: Hariprasad Shenai Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb4/cm.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 5e153f6d4b48..cc36e9bf9dea 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -2180,7 +2180,6 @@ static void reject_cr(struct c4iw_dev *dev, u32 hwtid, struct sk_buff *skb) PDBG("%s c4iw_dev %p tid %u\n", __func__, dev, hwtid); BUG_ON(skb_cloned(skb)); skb_trim(skb, sizeof(struct cpl_tid_release)); - skb_get(skb); release_tid(&dev->rdev, hwtid, skb); return; } -- cgit v1.2.3 From 5dab6d3ab1abed99be6166b844af58237d52a135 Mon Sep 17 00:00:00 2001 From: Hariprasad S Date: Mon, 23 Jun 2014 19:12:36 +0530 Subject: RDMA/cxgb4: Clean up connection on ARP error Based on origninal work by Steve Wise Signed-off-by: Steve Wise Signed-off-by: Hariprasad Shenai Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb4/cm.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index cc36e9bf9dea..6a93280250d1 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -432,8 +432,17 @@ static void arp_failure_discard(void *handle, struct sk_buff *skb) */ static void act_open_req_arp_failure(void *handle, struct sk_buff *skb) { + struct c4iw_ep *ep = handle; + printk(KERN_ERR MOD "ARP failure duing connect\n"); kfree_skb(skb); + connect_reply_upcall(ep, -EHOSTUNREACH); + state_set(&ep->com, DEAD); + remove_handle(ep->com.dev, &ep->com.dev->atid_idr, ep->atid); + cxgb4_free_atid(ep->com.dev->rdev.lldi.tids, ep->atid); + dst_release(ep->dst); + cxgb4_l2t_release(ep->l2t); + c4iw_put_ep(&ep->com); } /* @@ -658,7 +667,7 @@ static int send_connect(struct c4iw_ep *ep) opt2 |= T5_OPT_2_VALID; opt2 |= V_CONG_CNTRL(CONG_ALG_TAHOE); } - t4_set_arp_err_handler(skb, NULL, act_open_req_arp_failure); + t4_set_arp_err_handler(skb, ep, act_open_req_arp_failure); if (is_t4(ep->com.dev->rdev.lldi.adapter_type)) { if (ep->com.remote_addr.ss_family == AF_INET) { -- cgit v1.2.3 From 6b54d54dea82ae214e4a45a503c4ef755a8ecee8 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Tue, 8 Jul 2014 10:20:35 -0500 Subject: RDMA/cxgb4: Initialize the device status page The status page is mapped to user processes and allows sharing the device state between the kernel and user processes. This state isn't getting initialized and thus intermittently causes problems. Namely, the user process can mistakenly think the user doorbell writes are disabled which causes SQ work requests to never get fetched by HW. Fixes: 05eb23893c2c ("cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes"). Signed-off-by: Steve Wise Cc: # v3.15 Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb4/device.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c index dd93aadc996e..16b75de4b2de 100644 --- a/drivers/infiniband/hw/cxgb4/device.c +++ b/drivers/infiniband/hw/cxgb4/device.c @@ -696,6 +696,7 @@ static int c4iw_rdev_open(struct c4iw_rdev *rdev) pr_err(MOD "error allocating status page\n"); goto err4; } + rdev->status_page->db_off = 0; return 0; err4: c4iw_rqtpool_destroy(rdev); -- cgit v1.2.3 From 5a90af67c2126fe1d04ebccc1f8177e6ca70d3a9 Mon Sep 17 00:00:00 2001 From: Prabhakar Lad Date: Tue, 8 Jul 2014 16:25:38 +0100 Subject: cpufreq: Makefile: fix compilation for davinci platform Since commtit 8a7b1227e303 (cpufreq: davinci: move cpufreq driver to drivers/cpufreq) this added dependancy only for CONFIG_ARCH_DAVINCI_DA850 where as davinci_cpufreq_init() call is used by all davinci platform. This patch fixes following build error: arch/arm/mach-davinci/built-in.o: In function `davinci_init_late': :(.init.text+0x928): undefined reference to `davinci_cpufreq_init' make: *** [vmlinux] Error 1 Fixes: 8a7b1227e303 (cpufreq: davinci: move cpufreq driver to drivers/cpufreq) Signed-off-by: Lad, Prabhakar Acked-by: Viresh Kumar Cc: 3.10+ # 3.10+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 738c8b7b17dc..db6d9a2fea4d 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -49,7 +49,7 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) += arm_big_little.o # LITTLE drivers, so that it is probed last. obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o -obj-$(CONFIG_ARCH_DAVINCI_DA850) += davinci-cpufreq.o +obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o -- cgit v1.2.3 From e0056593b61253f1a8a9941dacda22e73b963cdc Mon Sep 17 00:00:00 2001 From: Dmitry Popov Date: Sat, 5 Jul 2014 02:26:37 +0400 Subject: ip_tunnel: fix ip_tunnel_lookup This patch fixes 3 similar bugs where incoming packets might be routed into wrong non-wildcard tunnels: 1) Consider the following setup: ip address add 1.1.1.1/24 dev eth0 ip address add 1.1.1.2/24 dev eth0 ip tunnel add ipip1 remote 2.2.2.2 local 1.1.1.1 mode ipip dev eth0 ip link set ipip1 up Incoming ipip packets from 2.2.2.2 were routed into ipip1 even if it has dst = 1.1.1.2. Moreover even if there was wildcard tunnel like ip tunnel add ipip0 remote 2.2.2.2 local any mode ipip dev eth0 but it was created before explicit one (with local 1.1.1.1), incoming ipip packets with src = 2.2.2.2 and dst = 1.1.1.2 were still routed into ipip1. Same issue existed with all tunnels that use ip_tunnel_lookup (gre, vti) 2) ip address add 1.1.1.1/24 dev eth0 ip tunnel add ipip1 remote 2.2.146.85 local 1.1.1.1 mode ipip dev eth0 ip link set ipip1 up Incoming ipip packets with dst = 1.1.1.1 were routed into ipip1, no matter what src address is. Any remote ip address which has ip_tunnel_hash = 0 raised this issue, 2.2.146.85 is just an example, there are more than 4 million of them. And again, wildcard tunnel like ip tunnel add ipip0 remote any local 1.1.1.1 mode ipip dev eth0 wouldn't be ever matched if it was created before explicit tunnel like above. Gre & vti tunnels had the same issue. 3) ip address add 1.1.1.1/24 dev eth0 ip tunnel add gre1 remote 2.2.146.84 local 1.1.1.1 key 1 mode gre dev eth0 ip link set gre1 up Any incoming gre packet with key = 1 were routed into gre1, no matter what src/dst addresses are. Any remote ip address which has ip_tunnel_hash = 0 raised the issue, 2.2.146.84 is just an example, there are more than 4 million of them. Wildcard tunnel like ip tunnel add gre2 remote any local any key 1 mode gre dev eth0 wouldn't be ever matched if it was created before explicit tunnel like above. All this stuff happened because while looking for a wildcard tunnel we didn't check that matched tunnel is a wildcard one. Fixed. Signed-off-by: Dmitry Popov Signed-off-by: David S. Miller --- net/ipv4/ip_tunnel.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index 54b6731dab55..6f9de61dce5f 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -169,6 +169,7 @@ struct ip_tunnel *ip_tunnel_lookup(struct ip_tunnel_net *itn, hlist_for_each_entry_rcu(t, head, hash_node) { if (remote != t->parms.iph.daddr || + t->parms.iph.saddr != 0 || !(t->dev->flags & IFF_UP)) continue; @@ -185,10 +186,11 @@ struct ip_tunnel *ip_tunnel_lookup(struct ip_tunnel_net *itn, head = &itn->tunnels[hash]; hlist_for_each_entry_rcu(t, head, hash_node) { - if ((local != t->parms.iph.saddr && - (local != t->parms.iph.daddr || - !ipv4_is_multicast(local))) || - !(t->dev->flags & IFF_UP)) + if ((local != t->parms.iph.saddr || t->parms.iph.daddr != 0) && + (local != t->parms.iph.daddr || !ipv4_is_multicast(local))) + continue; + + if (!(t->dev->flags & IFF_UP)) continue; if (!ip_tunnel_key_match(&t->parms, flags, key)) @@ -205,6 +207,8 @@ struct ip_tunnel *ip_tunnel_lookup(struct ip_tunnel_net *itn, hlist_for_each_entry_rcu(t, head, hash_node) { if (t->parms.i_key != key || + t->parms.iph.saddr != 0 || + t->parms.iph.daddr != 0 || !(t->dev->flags & IFF_UP)) continue; -- cgit v1.2.3 From 36beddc272c111689f3042bf3d10a64d8a805f93 Mon Sep 17 00:00:00 2001 From: Andrey Utkin Date: Mon, 7 Jul 2014 23:22:50 +0300 Subject: appletalk: Fix socket referencing in skb Setting just skb->sk without taking its reference and setting a destructor is invalid. However, in the places where this was done, skb is used in a way not requiring skb->sk setting. So dropping the setting of skb->sk. Thanks to Eric Dumazet for correct solution. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79441 Reported-by: Ed Martin Signed-off-by: Andrey Utkin Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/appletalk/ddp.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c index 01a1082e02b3..bfcf6be1d665 100644 --- a/net/appletalk/ddp.c +++ b/net/appletalk/ddp.c @@ -1489,8 +1489,6 @@ static int atalk_rcv(struct sk_buff *skb, struct net_device *dev, goto drop; /* Queue packet (standard) */ - skb->sk = sock; - if (sock_queue_rcv_skb(sock, skb) < 0) goto drop; @@ -1644,7 +1642,6 @@ static int atalk_sendmsg(struct kiocb *iocb, struct socket *sock, struct msghdr if (!skb) goto out; - skb->sk = sk; skb_reserve(skb, ddp_dl->header_length); skb_reserve(skb, dev->hard_header_len); skb->dev = dev; -- cgit v1.2.3 From 0b0302449110ca5ca4350458ed57b971fcb78ec1 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Tue, 8 Jul 2014 14:49:28 +0800 Subject: r8152: wake up the device before dumping the hw counter The device should be waked up from runtime suspend before dumping the hw counter. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 25431965a625..a795ecf8d5b6 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3204,8 +3204,13 @@ static void rtl8152_get_ethtool_stats(struct net_device *dev, struct r8152 *tp = netdev_priv(dev); struct tally_counter tally; + if (usb_autopm_get_interface(tp->intf) < 0) + return; + generic_ocp_read(tp, PLA_TALLYCNT, sizeof(tally), &tally, MCU_TYPE_PLA); + usb_autopm_put_interface(tp->intf); + data[0] = le64_to_cpu(tally.tx_packets); data[1] = le64_to_cpu(tally.rx_packets); data[2] = le64_to_cpu(tally.tx_errors); -- cgit v1.2.3 From fbc6daf19745b372c0d909e5d74ab02e42b70e51 Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Tue, 8 Jul 2014 11:28:12 +0300 Subject: net/mlx4_en: Ignore budget on TX napi polling It is recommended that TX work not count against the quota. The cost of TX packet liberation is a minute percentage of what it costs to process an RX frame. Furthermore, that SKB freeing makes memory available for other paths in the stack. Give the TX a larger budget and be more aggressive about cleaning up the Tx descriptors this budget could be changed using ethtool: $ ethtool -C eth1 tx-frames-irq Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 7 +++++++ drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 1 + drivers/net/ethernet/mellanox/mlx4/en_tx.c | 28 ++++++++++++------------- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 3 +++ 4 files changed, 24 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index fa1a069e14e6..68d763d2d030 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -417,6 +417,8 @@ static int mlx4_en_get_coalesce(struct net_device *dev, coal->tx_coalesce_usecs = priv->tx_usecs; coal->tx_max_coalesced_frames = priv->tx_frames; + coal->tx_max_coalesced_frames_irq = priv->tx_work_limit; + coal->rx_coalesce_usecs = priv->rx_usecs; coal->rx_max_coalesced_frames = priv->rx_frames; @@ -426,6 +428,7 @@ static int mlx4_en_get_coalesce(struct net_device *dev, coal->rx_coalesce_usecs_high = priv->rx_usecs_high; coal->rate_sample_interval = priv->sample_interval; coal->use_adaptive_rx_coalesce = priv->adaptive_rx_coal; + return 0; } @@ -434,6 +437,9 @@ static int mlx4_en_set_coalesce(struct net_device *dev, { struct mlx4_en_priv *priv = netdev_priv(dev); + if (!coal->tx_max_coalesced_frames_irq) + return -EINVAL; + priv->rx_frames = (coal->rx_max_coalesced_frames == MLX4_EN_AUTO_CONF) ? MLX4_EN_RX_COAL_TARGET : @@ -457,6 +463,7 @@ static int mlx4_en_set_coalesce(struct net_device *dev, priv->rx_usecs_high = coal->rx_coalesce_usecs_high; priv->sample_interval = coal->rate_sample_interval; priv->adaptive_rx_coal = coal->use_adaptive_rx_coalesce; + priv->tx_work_limit = coal->tx_max_coalesced_frames_irq; return mlx4_en_moderation_update(priv); } diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index e94d96f0ef55..7345c43b019e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2473,6 +2473,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, MLX4_WQE_CTRL_SOLICITED); priv->num_tx_rings_p_up = mdev->profile.num_tx_rings_p_up; priv->tx_ring_num = prof->tx_ring_num; + priv->tx_work_limit = MLX4_EN_DEFAULT_TX_WORK; priv->tx_ring = kzalloc(sizeof(struct mlx4_en_tx_ring *) * MAX_TX_RINGS, GFP_KERNEL); diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index ac3dead3792c..5045bab59633 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -351,9 +351,8 @@ int mlx4_en_free_tx_buf(struct net_device *dev, struct mlx4_en_tx_ring *ring) return cnt; } -static int mlx4_en_process_tx_cq(struct net_device *dev, - struct mlx4_en_cq *cq, - int budget) +static bool mlx4_en_process_tx_cq(struct net_device *dev, + struct mlx4_en_cq *cq) { struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_cq *mcq = &cq->mcq; @@ -372,9 +371,10 @@ static int mlx4_en_process_tx_cq(struct net_device *dev, int factor = priv->cqe_factor; u64 timestamp = 0; int done = 0; + int budget = priv->tx_work_limit; if (!priv->port_up) - return 0; + return true; index = cons_index & size_mask; cqe = &buf[(index << factor) + factor]; @@ -447,7 +447,7 @@ static int mlx4_en_process_tx_cq(struct net_device *dev, netif_tx_wake_queue(ring->tx_queue); ring->wake_queue++; } - return done; + return done < budget; } void mlx4_en_tx_irq(struct mlx4_cq *mcq) @@ -467,18 +467,16 @@ int mlx4_en_poll_tx_cq(struct napi_struct *napi, int budget) struct mlx4_en_cq *cq = container_of(napi, struct mlx4_en_cq, napi); struct net_device *dev = cq->dev; struct mlx4_en_priv *priv = netdev_priv(dev); - int done; + int clean_complete; - done = mlx4_en_process_tx_cq(dev, cq, budget); + clean_complete = mlx4_en_process_tx_cq(dev, cq); + if (!clean_complete) + return budget; - /* If we used up all the quota - we're probably not done yet... */ - if (done < budget) { - /* Done for now */ - napi_complete(napi); - mlx4_en_arm_cq(priv, cq); - return done; - } - return budget; + napi_complete(napi); + mlx4_en_arm_cq(priv, cq); + + return 0; } static struct mlx4_en_tx_desc *mlx4_en_bounce_to_desc(struct mlx4_en_priv *priv, diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 624e1939e9ee..d72a5a894fc6 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -126,6 +126,8 @@ enum { #define MAX_TX_RINGS (MLX4_EN_MAX_TX_RING_P_UP * \ MLX4_EN_NUM_UP) +#define MLX4_EN_DEFAULT_TX_WORK 256 + /* Target number of packets to coalesce with interrupt moderation */ #define MLX4_EN_RX_COAL_TARGET 44 #define MLX4_EN_RX_COAL_TIME 0x10 @@ -543,6 +545,7 @@ struct mlx4_en_priv { __be32 ctrl_flags; u32 flags; u8 num_tx_rings_p_up; + u32 tx_work_limit; u32 tx_ring_num; u32 rx_ring_num; u32 rx_skb_size; -- cgit v1.2.3 From 4d12bc63ab5e48c1d78fa13883cf6fefcea3afb1 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 8 Jul 2014 10:49:43 +0200 Subject: net: mvneta: fix operation in 10 Mbit/s mode As reported by Maggie Mae Roxas, the mvneta driver doesn't behave properly in 10 Mbit/s mode. This is due to a misconfiguration of the MVNETA_GMAC_AUTONEG_CONFIG register: bit MVNETA_GMAC_CONFIG_MII_SPEED must be set for a 100 Mbit/s speed, but cleared for a 10 Mbit/s speed, which the driver was not properly doing. This commit adjusts that by setting the MVNETA_GMAC_CONFIG_MII_SPEED bit only in 100 Mbit/s mode, and relying on the fact that all the speed related bits of this register are cleared at the beginning of the mvneta_adjust_link() function. This problem exists since c5aff18204da0 ("net: mvneta: driver for Marvell Armada 370/XP network unit") which is the commit that introduced the mvneta driver in the kernel. Cc: # v3.8+ Fixes: c5aff18204da0 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Reported-by: Maggie Mae Roxas Cc: Maggie Mae Roxas Signed-off-by: Thomas Petazzoni Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 45beca17fa50..d49f08d22071 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -2529,7 +2529,7 @@ static void mvneta_adjust_link(struct net_device *ndev) if (phydev->speed == SPEED_1000) val |= MVNETA_GMAC_CONFIG_GMII_SPEED; - else + else if (phydev->speed == SPEED_100) val |= MVNETA_GMAC_CONFIG_MII_SPEED; mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); -- cgit v1.2.3 From 0a1985879437d14bda8c90d0dae3455c467d7642 Mon Sep 17 00:00:00 2001 From: Thomas Fitzsimmons Date: Tue, 8 Jul 2014 19:44:07 -0400 Subject: net: mvneta: Fix big endian issue in mvneta_txq_desc_csum() This commit fixes the command value generated for CSUM calculation when running in big endian mode. The Ethernet protocol ID for IP was being unconditionally byte-swapped in the layer 3 protocol check (with swab16), which caused the mvneta driver to not function correctly in big endian mode. This patch byte-swaps the ID conditionally with htons. Cc: # v3.13+ Signed-off-by: Thomas Fitzsimmons Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index d49f08d22071..dadd9a5f6323 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -1207,7 +1207,7 @@ static u32 mvneta_txq_desc_csum(int l3_offs, int l3_proto, command = l3_offs << MVNETA_TX_L3_OFF_SHIFT; command |= ip_hdr_len << MVNETA_TX_IP_HLEN_SHIFT; - if (l3_proto == swab16(ETH_P_IP)) + if (l3_proto == htons(ETH_P_IP)) command |= MVNETA_TXD_IP_CSUM; else command |= MVNETA_TX_L3_IP6; -- cgit v1.2.3 From 9c72cc6f00d24711ef585772396dd1ae180881a6 Mon Sep 17 00:00:00 2001 From: Scot Doyle Date: Thu, 3 Jul 2014 23:27:50 +0000 Subject: drm/i915: quirk asserts controllable backlight presence, overriding VBT commit c675949ec58ca50d5a3ae3c757892f1560f6e896 Author: Jani Nikula Date: Wed Apr 9 11:31:37 2014 +0300 drm/i915: do not setup backlight if not available according to VBT caused a regression on machines with a misconfigured VBT. Add a quirk to assert the presence of a controllable backlight. Use it to ignore the VBT backlight presence check during backlight setup. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813 Tested-by: James Duley Tested-by: Michael Mullin Reviewed-by: Jani Nikula Signed-off-by: Scot Doyle Signed-off-by: Jani Nikula Cc: stable@vger.kernel.org # 3.15 only [danvet: Add cc: stable because the regressing commit is in 3.15.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_display.c | 8 ++++++++ drivers/gpu/drm/i915/intel_panel.c | 8 ++++++-- 3 files changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index a47fbf60b781..374f964323ad 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -656,6 +656,7 @@ enum intel_sbi_destination { #define QUIRK_PIPEA_FORCE (1<<0) #define QUIRK_LVDS_SSC_DISABLE (1<<1) #define QUIRK_INVERT_BRIGHTNESS (1<<2) +#define QUIRK_BACKLIGHT_PRESENT (1<<3) struct intel_fbdev; struct intel_fbc_work; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 556c916dbf9d..949c765037ed 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -11591,6 +11591,14 @@ static void quirk_invert_brightness(struct drm_device *dev) DRM_INFO("applying inverted panel brightness quirk\n"); } +/* Some VBT's incorrectly indicate no backlight is present */ +static void quirk_backlight_present(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + dev_priv->quirks |= QUIRK_BACKLIGHT_PRESENT; + DRM_INFO("applying backlight present quirk\n"); +} + struct intel_quirk { int device; int subsystem_vendor; diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 38a98570d10c..628cd8938274 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -1118,8 +1118,12 @@ int intel_panel_setup_backlight(struct drm_connector *connector) int ret; if (!dev_priv->vbt.backlight.present) { - DRM_DEBUG_KMS("native backlight control not available per VBT\n"); - return 0; + if (dev_priv->quirks & QUIRK_BACKLIGHT_PRESENT) { + DRM_DEBUG_KMS("no backlight present per VBT, but present per quirk\n"); + } else { + DRM_DEBUG_KMS("no backlight present per VBT\n"); + return 0; + } } /* set level and max in panel struct */ -- cgit v1.2.3 From 2e93a1aa9ca455aa3ad0294bcd6d66f38bf8b758 Mon Sep 17 00:00:00 2001 From: Scot Doyle Date: Thu, 3 Jul 2014 23:27:51 +0000 Subject: drm/i915: Acer C720 and C720P have controllable backlights The Acer C720 and C720P Chromebooks (with Celeron 2955U CPU) have a controllable backlight although their VBT reports otherwise. Apply quirk to ignore the backlight presence check during backlight setup. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813 Tested-by: James Duley Tested-by: Michael Mullin Signed-off-by: Scot Doyle CC: Jani Nikula Signed-off-by: Jani Nikula Cc: stable@vger.kernel.org # 3.15 only [danvet: Add cc: stable because the regressing commit is in 3.15.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 949c765037ed..2ee81656f80a 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -11667,6 +11667,9 @@ static struct intel_quirk intel_quirks[] = { /* Acer Aspire 5336 */ { 0x2a42, 0x1025, 0x048a, quirk_invert_brightness }, + + /* Acer C720 and C720P Chromebooks (Celeron 2955U) have backlights */ + { 0x0a06, 0x1025, 0x0a11, quirk_backlight_present }, }; static void intel_init_quirks(struct drm_device *dev) -- cgit v1.2.3 From d4967d8c6d4f52623f2be8eaff0b445dc5863c92 Mon Sep 17 00:00:00 2001 From: Scot Doyle Date: Thu, 3 Jul 2014 23:27:52 +0000 Subject: drm/i915: Toshiba CB35 has a controllable backlight The Toshiba CB35 Chromebook (with Celeron 2955U CPU) has a controllable backlight although its VBT reports otherwise. Apply quirk to ignore the backlight presence check during backlight setup. Patch tested by author on Toshiba CB35. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813 Signed-off-by: Scot Doyle CC: Jani Nikula Signed-off-by: Jani Nikula Cc: stable@vger.kernel.org # 3.15 only [danvet: Add cc: stable because the regressing commit is in 3.15.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2ee81656f80a..e27e7804c0b9 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -11670,6 +11670,9 @@ static struct intel_quirk intel_quirks[] = { /* Acer C720 and C720P Chromebooks (Celeron 2955U) have backlights */ { 0x0a06, 0x1025, 0x0a11, quirk_backlight_present }, + + /* Toshiba CB35 Chromebook (Celeron 2955U) */ + { 0x0a06, 0x1179, 0x0a88, quirk_backlight_present }, }; static void intel_init_quirks(struct drm_device *dev) -- cgit v1.2.3 From a799a9780eb5c874d9d7ca0bbee66401ca98c013 Mon Sep 17 00:00:00 2001 From: Shobhit Kumar Date: Thu, 3 Jul 2014 16:35:40 +0530 Subject: drm/i915/vlv: DPI FIFO empty check is not needed While sending DPI SHUTDOWN command, we cannot wait for FIFO empty as pipes are not disabled at that time. In case of MIPI we disable port first and send SHUTDOWN command while pipe is still running and FIFOs will not be empty, causing spurious error log Signed-off-by: Shobhit Kumar Tested-by: Chris Wilson Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dsi_cmd.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dsi_cmd.c b/drivers/gpu/drm/i915/intel_dsi_cmd.c index 3eeb21b9fddf..933c86305237 100644 --- a/drivers/gpu/drm/i915/intel_dsi_cmd.c +++ b/drivers/gpu/drm/i915/intel_dsi_cmd.c @@ -404,12 +404,6 @@ int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd, bool hs) else cmd |= DPI_LP_MODE; - /* DPI virtual channel?! */ - - mask = DPI_FIFO_EMPTY; - if (wait_for((I915_READ(MIPI_GEN_FIFO_STAT(pipe)) & mask) == mask, 50)) - DRM_ERROR("Timeout waiting for DPI FIFO empty.\n"); - /* clear bit */ I915_WRITE(MIPI_INTR_STAT(pipe), SPL_PKT_SENT_INTERRUPT); -- cgit v1.2.3 From aceb365ca9a51fb604313c08ed3061d6cc643237 Mon Sep 17 00:00:00 2001 From: Shobhit Kumar Date: Thu, 3 Jul 2014 16:35:41 +0530 Subject: drm/i915/vlv: Update the DSI ULPS entry/exit sequence We should keep DEVICE_READY bit set in the ULPS enter sequence. In exit sequence also we should set DEVICE_READY, but thats causing blankout for me. Also exit sequence is simplified as per hw team recommendation. This should fix - [drm:intel_dsi_clear_device_ready] *ERROR* DSI LP not going Low Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80818 Signed-off-by: Shobhit Kumar Tested-by: Chris Wilson Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dsi.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 02f99d768d49..3fd082933c87 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -117,17 +117,18 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder) /* bandgap reset is needed after everytime we do power gate */ band_gap_reset(dev_priv); + I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER); + usleep_range(2500, 3000); + val = I915_READ(MIPI_PORT_CTRL(pipe)); I915_WRITE(MIPI_PORT_CTRL(pipe), val | LP_OUTPUT_HOLD); usleep_range(1000, 1500); - I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_EXIT); - usleep_range(2000, 2500); - I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY); - usleep_range(2000, 2500); - I915_WRITE(MIPI_DEVICE_READY(pipe), 0x00); - usleep_range(2000, 2500); + + I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_EXIT); + usleep_range(2500, 3000); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY); - usleep_range(2000, 2500); + usleep_range(2500, 3000); } static void intel_dsi_enable(struct intel_encoder *encoder) @@ -271,23 +272,23 @@ static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) DRM_DEBUG_KMS("\n"); - I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_ENTER); usleep_range(2000, 2500); - I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_EXIT); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_EXIT); usleep_range(2000, 2500); - I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_ENTER); usleep_range(2000, 2500); - val = I915_READ(MIPI_PORT_CTRL(pipe)); - I915_WRITE(MIPI_PORT_CTRL(pipe), val & ~LP_OUTPUT_HOLD); - usleep_range(1000, 1500); - if (wait_for(((I915_READ(MIPI_PORT_CTRL(pipe)) & AFE_LATCHOUT) == 0x00000), 30)) DRM_ERROR("DSI LP not going Low\n"); + val = I915_READ(MIPI_PORT_CTRL(pipe)); + I915_WRITE(MIPI_PORT_CTRL(pipe), val & ~LP_OUTPUT_HOLD); + usleep_range(1000, 1500); + I915_WRITE(MIPI_DEVICE_READY(pipe), 0x00); usleep_range(2000, 2500); -- cgit v1.2.3 From f1e1c2129b79cfdaf07bca37c5a10569fe021abe Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Thu, 5 Jun 2014 20:02:59 +0300 Subject: drm/i915: Don't clobber the GTT when it's within stolen memory MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On most gen2-4 platforms the GTT can be (or maybe always is?) inside the stolen memory region. If that's the case, reduce the size of the stolen memory appropriately to make make sure we don't clobber the GTT. v2: Deal with gen4 36 bit physical address Signed-off-by: Ville Syrjälä Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80151 Acked-by: Chris Wilson Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_stolen.c | 44 ++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/i915_reg.h | 3 +++ 2 files changed, 47 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c index 62ef55ba061c..7465ab0fd396 100644 --- a/drivers/gpu/drm/i915/i915_gem_stolen.c +++ b/drivers/gpu/drm/i915/i915_gem_stolen.c @@ -74,6 +74,50 @@ static unsigned long i915_stolen_to_physical(struct drm_device *dev) if (base == 0) return 0; + /* make sure we don't clobber the GTT if it's within stolen memory */ + if (INTEL_INFO(dev)->gen <= 4 && !IS_G33(dev) && !IS_G4X(dev)) { + struct { + u32 start, end; + } stolen[2] = { + { .start = base, .end = base + dev_priv->gtt.stolen_size, }, + { .start = base, .end = base + dev_priv->gtt.stolen_size, }, + }; + u64 gtt_start, gtt_end; + + gtt_start = I915_READ(PGTBL_CTL); + if (IS_GEN4(dev)) + gtt_start = (gtt_start & PGTBL_ADDRESS_LO_MASK) | + (gtt_start & PGTBL_ADDRESS_HI_MASK) << 28; + else + gtt_start &= PGTBL_ADDRESS_LO_MASK; + gtt_end = gtt_start + gtt_total_entries(dev_priv->gtt) * 4; + + if (gtt_start >= stolen[0].start && gtt_start < stolen[0].end) + stolen[0].end = gtt_start; + if (gtt_end > stolen[1].start && gtt_end <= stolen[1].end) + stolen[1].start = gtt_end; + + /* pick the larger of the two chunks */ + if (stolen[0].end - stolen[0].start > + stolen[1].end - stolen[1].start) { + base = stolen[0].start; + dev_priv->gtt.stolen_size = stolen[0].end - stolen[0].start; + } else { + base = stolen[1].start; + dev_priv->gtt.stolen_size = stolen[1].end - stolen[1].start; + } + + if (stolen[0].start != stolen[1].start || + stolen[0].end != stolen[1].end) { + DRM_DEBUG_KMS("GTT within stolen memory at 0x%llx-0x%llx\n", + (unsigned long long) gtt_start, + (unsigned long long) gtt_end - 1); + DRM_DEBUG_KMS("Stolen memory adjusted to 0x%x-0x%x\n", + base, base + (u32) dev_priv->gtt.stolen_size - 1); + } + } + + /* Verify that nothing else uses this physical address. Stolen * memory should be reserved by the BIOS and hidden from the * kernel. So if the region is already marked as busy, something diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index e691b30b2817..a5bab61bfc00 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -942,6 +942,9 @@ enum punit_power_well { /* * Instruction and interrupt control regs */ +#define PGTBL_CTL 0x02020 +#define PGTBL_ADDRESS_LO_MASK 0xfffff000 /* bits [31:12] */ +#define PGTBL_ADDRESS_HI_MASK 0x000000f0 /* bits [35:32] (gen4) */ #define PGTBL_ER 0x02024 #define RENDER_RING_BASE 0x02000 #define BSD_RING_BASE 0x04000 -- cgit v1.2.3 From 1bb9e632a0aeee1121e652ee4dc80e5e6f14bcd2 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 8 Jul 2014 10:02:43 +0200 Subject: drm/i915: Only unbind vgacon, not other console drivers The console subsystem only provides a function to switch to a given console, but we want to actually only switach away from vgacon. Unconditionally switching to the dummy console resulted in switching away from fbcon in multi-gpu setups when other gpu drivers are loaded before i915. Then either the reinitialization of fbcon when i915 registers its fbdev emulation or the teardown of the fbcon driver killed the machine. So only switch to the dummy console when it's required. Kudos to Chris for the original idea, I've only refined it a bit to still unregister vgacon even when it's currently unused. This regression has been introduced in commit a4de05268e674e8ed31df6348269e22d6c6a1803 Author: Daniel Vetter Date: Thu Jun 5 16:20:46 2014 +0200 drm/i915: Kick out vga console Reported-and-tested-by: Ed Tomlinson Cc: Chris Wilson Cc: David Herrmann Reviewed-by: Chris Wilson Reviewed-by: David Herrmann Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_dma.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 6c656392d67d..d44344140627 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1464,12 +1464,13 @@ static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv) #else static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv) { - int ret; + int ret = 0; DRM_INFO("Replacing VGA console driver\n"); console_lock(); - ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1); + if (con_is_bound(&vga_con)) + ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1); if (ret == 0) { ret = do_unregister_con_driver(&vga_con); -- cgit v1.2.3 From 01527b3127997ef6370d5ad4fa25d96847fbf12a Mon Sep 17 00:00:00 2001 From: Clint Taylor Date: Mon, 7 Jul 2014 13:01:46 -0700 Subject: drm/i915/vlv: T12 eDP panel timing enforcement during reboot The panel power sequencer on vlv doesn't appear to accept changes to its T12 power down duration during warm reboots. This change forces a delay for warm reboots to the T12 panel timing as defined in the VBT table for the connected panel. Ver2: removed redundant pr_crit(), commented magic value for pp_div_reg Ver3: moved SYS_RESTART check earlier, new name for pp_div. Ver4: Minor issue changes Ver5: Move registration of reboot notifier to edp_connector_init, Added warning comment to handler about lack of PM notification. Signed-off-by: Clint Taylor Reviewed-by: Paulo Zanoni Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 42 ++++++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_drv.h | 2 ++ 2 files changed, 44 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 52fda950fd2a..075170d1844f 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -28,6 +28,8 @@ #include #include #include +#include +#include #include #include #include @@ -336,6 +338,37 @@ static u32 _pp_stat_reg(struct intel_dp *intel_dp) return VLV_PIPE_PP_STATUS(vlv_power_sequencer_pipe(intel_dp)); } +/* Reboot notifier handler to shutdown panel power to guarantee T12 timing + This function only applicable when panel PM state is not to be tracked */ +static int edp_notify_handler(struct notifier_block *this, unsigned long code, + void *unused) +{ + struct intel_dp *intel_dp = container_of(this, typeof(* intel_dp), + edp_notifier); + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + u32 pp_div; + u32 pp_ctrl_reg, pp_div_reg; + enum pipe pipe = vlv_power_sequencer_pipe(intel_dp); + + if (!is_edp(intel_dp) || code != SYS_RESTART) + return 0; + + if (IS_VALLEYVIEW(dev)) { + pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe); + pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe); + pp_div = I915_READ(pp_div_reg); + pp_div &= PP_REFERENCE_DIVIDER_MASK; + + /* 0x1F write to PP_DIV_REG sets max cycle delay */ + I915_WRITE(pp_div_reg, pp_div | 0x1F); + I915_WRITE(pp_ctrl_reg, PANEL_UNLOCK_REGS | PANEL_POWER_OFF); + msleep(intel_dp->panel_power_cycle_delay); + } + + return 0; +} + static bool edp_have_panel_power(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp_to_dev(intel_dp); @@ -3707,6 +3740,10 @@ void intel_dp_encoder_destroy(struct drm_encoder *encoder) drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); edp_panel_vdd_off_sync(intel_dp); drm_modeset_unlock(&dev->mode_config.connection_mutex); + if (intel_dp->edp_notifier.notifier_call) { + unregister_reboot_notifier(&intel_dp->edp_notifier); + intel_dp->edp_notifier.notifier_call = NULL; + } } kfree(intel_dig_port); } @@ -4184,6 +4221,11 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, } mutex_unlock(&dev->mode_config.mutex); + if (IS_VALLEYVIEW(dev)) { + intel_dp->edp_notifier.notifier_call = edp_notify_handler; + register_reboot_notifier(&intel_dp->edp_notifier); + } + intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode); intel_panel_setup_backlight(connector); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index eaa27ee9e367..f67340ed2c12 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -538,6 +538,8 @@ struct intel_dp { unsigned long last_power_on; unsigned long last_backlight_off; bool psr_setup_done; + struct notifier_block edp_notifier; + bool use_tps3; struct intel_connector *attached_connector; -- cgit v1.2.3 From c128c776e0f45d3edaf44ab3fecfa5d1f7067c07 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 9 Jul 2014 14:31:04 +0200 Subject: ACPI / PNP: add soc_button_array device ID to PNP IDs list The soc_button_array PNP driver was introduced in 3.15. But in commit eec15edbb0e1 (ACPI / PNP: use device ID list for PNPACPI device enumeration), when reworking the PNPACPI device enumeration, we missed the soc_button_array device ID. This results in a regression in 3.16-rc1 that soc_button_array pnp device fails to be enumerated. Fix the problem by adding soc_button_array device ID into the acpi_pnp scan handler's ID list. Fixes: eec15edbb0e1 (ACPI / PNP: use device ID list for PNPACPI device enumeration) Signed-off-by: Zhang Rui Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_pnp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/acpi/acpi_pnp.c b/drivers/acpi/acpi_pnp.c index 6703c1fd993a..4ddb0dca56f6 100644 --- a/drivers/acpi/acpi_pnp.c +++ b/drivers/acpi/acpi_pnp.c @@ -14,6 +14,8 @@ #include static const struct acpi_device_id acpi_pnp_device_ids[] = { + /* soc_button_array */ + {"PNP0C40"}, /* pata_isapnp */ {"PNP0600"}, /* Generic ESDI/IDE/ATA compatible hard disk controller */ /* floppy */ -- cgit v1.2.3 From 8bc6f60e3f7f31c4ce370b4b27b8f4b355b7f07e Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Wed, 11 Jun 2014 18:32:23 +0800 Subject: f2fs: remove unused variables in f2fs_sm_info Remove unused variables in struct f2fs_sm_info. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim --- fs/f2fs/f2fs.h | 3 --- fs/f2fs/segment.c | 2 -- 2 files changed, 5 deletions(-) diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index e51c732b0dd9..7ef7acdb9350 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -342,9 +342,6 @@ struct f2fs_sm_info { struct dirty_seglist_info *dirty_info; /* dirty segment information */ struct curseg_info *curseg_array; /* active segment information */ - struct list_head wblist_head; /* list of under-writeback pages */ - spinlock_t wblist_lock; /* lock for checkpoint */ - block_t seg0_blkaddr; /* block address of 0'th segment */ block_t main_blkaddr; /* start block address of main area */ block_t ssa_blkaddr; /* start block address of SSA area */ diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c index f25f0e07e26f..b22d5a0652bb 100644 --- a/fs/f2fs/segment.c +++ b/fs/f2fs/segment.c @@ -1885,8 +1885,6 @@ int build_segment_manager(struct f2fs_sb_info *sbi) /* init sm info */ sbi->sm_info = sm_info; - INIT_LIST_HEAD(&sm_info->wblist_head); - spin_lock_init(&sm_info->wblist_lock); sm_info->seg0_blkaddr = le32_to_cpu(raw_super->segment0_blkaddr); sm_info->main_blkaddr = le32_to_cpu(raw_super->main_blkaddr); sm_info->segment_count = le32_to_cpu(raw_super->segment_count); -- cgit v1.2.3 From d6b7d4b31dfd5a454a71c445b8086bc098237334 Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Thu, 12 Jun 2014 13:23:41 +0800 Subject: f2fs: check lower bound nid value in check_nid_range This patch add lower bound verification for nid in check_nid_range, so nids reserved like 0, node, meta passed by caller could be checked there. And then check_nid_range could be used in f2fs_nfs_get_inode for simplifying code. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim --- fs/f2fs/f2fs.h | 3 ++- fs/f2fs/inode.c | 1 + fs/f2fs/super.c | 4 +--- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index 7ef7acdb9350..58df97e174d0 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -641,7 +641,8 @@ static inline void f2fs_unlock_all(struct f2fs_sb_info *sbi) */ static inline int check_nid_range(struct f2fs_sb_info *sbi, nid_t nid) { - WARN_ON((nid >= NM_I(sbi)->max_nid)); + if (unlikely(nid < F2FS_ROOT_INO(sbi))) + return -EINVAL; if (unlikely(nid >= NM_I(sbi)->max_nid)) return -EINVAL; return 0; diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c index adc622c6bdce..2cf6962f6cc8 100644 --- a/fs/f2fs/inode.c +++ b/fs/f2fs/inode.c @@ -78,6 +78,7 @@ static int do_read_inode(struct inode *inode) if (check_nid_range(sbi, inode->i_ino)) { f2fs_msg(inode->i_sb, KERN_ERR, "bad inode number: %lu", (unsigned long) inode->i_ino); + WARN_ON(1); return -EINVAL; } diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index b2b18637cb9e..8f96d9372ade 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -689,9 +689,7 @@ static struct inode *f2fs_nfs_get_inode(struct super_block *sb, struct f2fs_sb_info *sbi = F2FS_SB(sb); struct inode *inode; - if (unlikely(ino < F2FS_ROOT_INO(sbi))) - return ERR_PTR(-ESTALE); - if (unlikely(ino >= NM_I(sbi)->max_nid)) + if (check_nid_range(sbi, ino)) return ERR_PTR(-ESTALE); /* -- cgit v1.2.3 From 90d72459ccb47335a4348947506fd091e63f7cf8 Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Tue, 24 Jun 2014 10:34:00 +0800 Subject: f2fs: fix error path in init_inode_metadata If we fail in this path: ->init_inode_metadata ->make_empty_dir ->get_new_data_page ->grab_cache_page return -ENOMEM We will bug on in error path of init_inode_metadata when call remove_inode_page because i_block = 2 (one inode block will be released later & one dentry block). We should release the dentry block in init_inode_metadata to avoid this BUG_ON, and avoid leak of dentry block resource, because we never have second chance to release that block in ->evict_inode as in upper error path we make this inode 'bad'. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim --- fs/f2fs/dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/f2fs/dir.c b/fs/f2fs/dir.c index 966acb039e3b..a4addd72ebbd 100644 --- a/fs/f2fs/dir.c +++ b/fs/f2fs/dir.c @@ -376,11 +376,11 @@ static struct page *init_inode_metadata(struct inode *inode, put_error: f2fs_put_page(page, 1); +error: /* once the failed inode becomes a bad inode, i_mode is S_IFREG */ truncate_inode_pages(&inode->i_data, 0); truncate_blocks(inode, 0); remove_dirty_dir_inode(inode); -error: remove_inode_page(inode); return ERR_PTR(err); } -- cgit v1.2.3 From dd4d961fe7d1cb1cba6e9d8d132475d4917ba864 Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Tue, 24 Jun 2014 14:13:13 +0800 Subject: f2fs: release new entry page correctly in error path of f2fs_rename This patch correct releasing code of new_page to avoid BUG_ON in error patch of f2fs_rename. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim --- fs/f2fs/namei.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c index 9138c32aa698..aa3ddb228f98 100644 --- a/fs/f2fs/namei.c +++ b/fs/f2fs/namei.c @@ -474,7 +474,8 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry, return 0; put_out_dir: - f2fs_put_page(new_page, 1); + kunmap(new_page); + f2fs_put_page(new_page, 0); out_dir: if (old_dir_entry) { kunmap(old_dir_page); -- cgit v1.2.3 From b2c0829912493df596706a1a036c67beb1bd6ff5 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Mon, 30 Jun 2014 18:09:55 +0900 Subject: f2fs: do checkpoint for the renamed inode If an inode is renamed, it should be registered as file_lost_pino to conduct checkpoint at f2fs_sync_file. Otherwise, the inode cannot be recovered due to no dent_mark in the following scenario. Note that, this scenario is from xfstests/322. 1. create "a" 2. fsync "a" 3. rename "a" to "b" 4. fsync "b" 5. Sudden power-cut After recovery is done, "b" should be seen. However, the result shows "a", since the recovery procedure does not enter recover_dentry due to no dent_mark. The reason is like below. - The nid of "a" is checkpointed during #2, f2fs_sync_file. - The inode page for "b" produced by #3 is written without dent_mark by sync_node_pages. So, this patch fixes this bug by assinging file_lost_pino to the "a"'s inode. If the pino is lost, f2fs_sync_file conducts checkpoint, and then recovers the latest pino and its dentry information for further recovery. Signed-off-by: Jaegeuk Kim --- fs/f2fs/namei.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c index aa3ddb228f98..a6bdddc33ce2 100644 --- a/fs/f2fs/namei.c +++ b/fs/f2fs/namei.c @@ -417,9 +417,6 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry, } f2fs_set_link(new_dir, new_entry, new_page, old_inode); - down_write(&F2FS_I(old_inode)->i_sem); - F2FS_I(old_inode)->i_pino = new_dir->i_ino; - up_write(&F2FS_I(old_inode)->i_sem); new_inode->i_ctime = CURRENT_TIME; down_write(&F2FS_I(new_inode)->i_sem); @@ -448,6 +445,10 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry, } } + down_write(&F2FS_I(old_inode)->i_sem); + file_lost_pino(old_inode); + up_write(&F2FS_I(old_inode)->i_sem); + old_inode->i_ctime = CURRENT_TIME; mark_inode_dirty(old_inode); @@ -457,9 +458,6 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry, if (old_dir != new_dir) { f2fs_set_link(old_inode, old_dir_entry, old_dir_page, new_dir); - down_write(&F2FS_I(old_inode)->i_sem); - F2FS_I(old_inode)->i_pino = new_dir->i_ino; - up_write(&F2FS_I(old_inode)->i_sem); update_inode_page(old_inode); } else { kunmap(old_dir_page); -- cgit v1.2.3 From 2743f865543c0c4a5e12fc13edb2bf89a6e9687c Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Sat, 28 Jun 2014 01:00:41 +0900 Subject: f2fs: check bdi->dirty_exceeded when trying to skip data writes If we don't check the current backing device status, balance_dirty_pages can fall into infinite pausing routine. This can be occurred when a lot of directories make a small number of dirty dentry pages including files. Reported-by: Brian Chadwick Signed-off-by: Jaegeuk Kim --- fs/f2fs/node.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c index 9dfb9a042fd2..4b697ccc9b0c 100644 --- a/fs/f2fs/node.c +++ b/fs/f2fs/node.c @@ -42,6 +42,8 @@ bool available_free_memory(struct f2fs_sb_info *sbi, int type) mem_size = (nm_i->nat_cnt * sizeof(struct nat_entry)) >> 12; res = mem_size < ((val.totalram * nm_i->ram_thresh / 100) >> 2); } else if (type == DIRTY_DENTS) { + if (sbi->sb->s_bdi->dirty_exceeded) + return false; mem_size = get_pages(sbi, F2FS_DIRTY_DENTS); res = mem_size < ((val.totalram * nm_i->ram_thresh / 100) >> 1); } -- cgit v1.2.3 From 50e1f8d22199b557337b3d1ec8520e4c5aa5c76e Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Mon, 7 Jul 2014 09:39:32 +0800 Subject: f2fs: avoid to access NULL pointer in issue_flush_thread Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=75861 Denis 2014-05-10 11:28:59 UTC reported: "F2FS-fs (mmcblk0p28): mounting.. Unable to handle kernel NULL pointer dereference at virtual address 00000018 ... [] (_raw_spin_lock+0x3c/0x70) from [] (issue_flush_thread+0x50/0x17c) [] (issue_flush_thread+0x50/0x17c) from [] (kthread+0x98/0xa4) [] (kthread+0x98/0xa4) from [] (kernel_thread_exit+0x0/0x8)" This patch assign cmd_control_info in sm_info before issue_flush_thread is being created, so this make sure that issue flush thread will have no chance to access invalid info in fcc. Signed-off-by: Chao Yu Reviewed-by: Gu Zheng Signed-off-by: Jaegeuk Kim --- fs/f2fs/segment.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c index b22d5a0652bb..d04613df710a 100644 --- a/fs/f2fs/segment.c +++ b/fs/f2fs/segment.c @@ -272,14 +272,15 @@ int create_flush_cmd_control(struct f2fs_sb_info *sbi) return -ENOMEM; spin_lock_init(&fcc->issue_lock); init_waitqueue_head(&fcc->flush_wait_queue); + sbi->sm_info->cmd_control_info = fcc; fcc->f2fs_issue_flush = kthread_run(issue_flush_thread, sbi, "f2fs_flush-%u:%u", MAJOR(dev), MINOR(dev)); if (IS_ERR(fcc->f2fs_issue_flush)) { err = PTR_ERR(fcc->f2fs_issue_flush); kfree(fcc); + sbi->sm_info->cmd_control_info = NULL; return err; } - sbi->sm_info->cmd_control_info = fcc; return err; } -- cgit v1.2.3 From dd5a6752ae7df4e0ba6ce3bcd0c3b4489bb3537f Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Tue, 8 Jul 2014 14:38:33 +0200 Subject: firmware: Create directories for external firmware Commit 5180d5f4 ("firmware: Simplify directory creation") broke including firmware specified in CONFIG_EXTRA_FIRMWARE: MK_FW firmware/amd-ucode/microcode_amd.bin.gen.S /bin/sh: firmware/amd-ucode/microcode_amd.bin.gen.S: No such file or directory ... firmware/Makefile:185: recipe for target 'firmware/amd-ucode/microcode_amd.bin.gen.S' failed It works with O= builds, because the directory is created by Makefile.build. Create the directory in firmware/Makefile in non-O builds. Reported-and-tested-by: Ronald Uitermark Reported-and-tested-by: Torsten Kaiser Signed-off-by: Michal Marek --- firmware/Makefile | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/firmware/Makefile b/firmware/Makefile index 5747417069ca..0862d34cf7d1 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -219,6 +219,12 @@ $(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) obj-y += $(patsubst %,%.gen.o, $(fw-external-y)) obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y)) +ifeq ($(KBUILD_SRC),) +# Makefile.build only creates subdirectories for O= builds, but external +# firmware might live outside the kernel source tree +_dummy := $(foreach d,$(addprefix $(obj)/,$(dir $(fw-external-y))), $(shell [ -d $(d) ] || mkdir -p $(d))) +endif + # Remove .S files and binaries created from ihex # (during 'make clean' .config isn't included so they're all in $(fw-shipped-)) targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \ -- cgit v1.2.3 From ac30ef832e6af0505b6f0251a6659adcfa74975e Mon Sep 17 00:00:00 2001 From: Ben Pfaff Date: Wed, 9 Jul 2014 10:31:22 -0700 Subject: netlink: Fix handling of error from netlink_dump(). netlink_dump() returns a negative errno value on error. Until now, netlink_recvmsg() directly recorded that negative value in sk->sk_err, but that's wrong since sk_err takes positive errno values. (This manifests as userspace receiving a positive return value from the recv() system call, falsely indicating success.) This bug was introduced in the commit that started checking the netlink_dump() return value, commit b44d211 (netlink: handle errors from netlink_dump()). Multithreaded Netlink dumps are one way to trigger this behavior in practice, as described in the commit message for the userspace workaround posted here: http://openvswitch.org/pipermail/dev/2014-June/042339.html This commit also fixes the same bug in netlink_poll(), introduced in commit cd1df525d (netlink: add flow control for memory mapped I/O). Signed-off-by: Ben Pfaff Signed-off-by: David S. Miller --- net/netlink/af_netlink.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 15c731f03fa6..e6fac7e3db52 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -636,7 +636,7 @@ static unsigned int netlink_poll(struct file *file, struct socket *sock, while (nlk->cb_running && netlink_dump_space(nlk)) { err = netlink_dump(sk); if (err < 0) { - sk->sk_err = err; + sk->sk_err = -err; sk->sk_error_report(sk); break; } @@ -2483,7 +2483,7 @@ static int netlink_recvmsg(struct kiocb *kiocb, struct socket *sock, atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf / 2) { ret = netlink_dump(sk); if (ret) { - sk->sk_err = ret; + sk->sk_err = -ret; sk->sk_error_report(sk); } } -- cgit v1.2.3 From affb1aff300ddee54df307812b38f166e8a865ef Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Mon, 7 Jul 2014 16:34:24 -0700 Subject: Drivers: hv: vmbus: Fix a bug in the channel callback dispatch code Starting with Win8, we have implemented several optimizations to improve the scalability and performance of the VMBUS transport between the Host and the Guest. Some of the non-performance critical services cannot leverage these optimization since they only read and process one message at a time. Make adjustments to the callback dispatch code to account for the way non-performance critical drivers handle reading of the channel. Signed-off-by: K. Y. Srinivasan Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/hv/connection.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c index e84f4526eb36..ae22e3c1fc4c 100644 --- a/drivers/hv/connection.c +++ b/drivers/hv/connection.c @@ -339,9 +339,13 @@ static void process_chn_event(u32 relid) */ do { - hv_begin_read(&channel->inbound); + if (read_state) + hv_begin_read(&channel->inbound); channel->onchannel_callback(arg); - bytes_to_read = hv_end_read(&channel->inbound); + if (read_state) + bytes_to_read = hv_end_read(&channel->inbound); + else + bytes_to_read = 0; } while (read_state && (bytes_to_read != 0)); } else { pr_err("no channel callback for relid - %u\n", relid); -- cgit v1.2.3 From 9bd2d0dfe4714dd5d7c09a93a5c9ea9e14ceb3fc Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Mon, 7 Jul 2014 16:34:25 -0700 Subject: Drivers: hv: util: Fix a bug in the KVP code Add code to poll the channel since we process only one message at a time and the host may not interrupt us. Also increase the receive buffer size since some KVP messages are close to 8K bytes in size. Signed-off-by: K. Y. Srinivasan Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv_kvp.c | 17 ++++++++++++++--- drivers/hv/hv_util.c | 2 +- 2 files changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c index ea852537307e..521c14625b3a 100644 --- a/drivers/hv/hv_kvp.c +++ b/drivers/hv/hv_kvp.c @@ -127,6 +127,17 @@ kvp_work_func(struct work_struct *dummy) kvp_respond_to_host(NULL, HV_E_FAIL); } +static void poll_channel(struct vmbus_channel *channel) +{ + if (channel->target_cpu != smp_processor_id()) + smp_call_function_single(channel->target_cpu, + hv_kvp_onchannelcallback, + channel, true); + else + hv_kvp_onchannelcallback(channel); +} + + static int kvp_handle_handshake(struct hv_kvp_msg *msg) { int ret = 1; @@ -155,7 +166,7 @@ static int kvp_handle_handshake(struct hv_kvp_msg *msg) kvp_register(dm_reg_value); kvp_transaction.active = false; if (kvp_transaction.kvp_context) - hv_kvp_onchannelcallback(kvp_transaction.kvp_context); + poll_channel(kvp_transaction.kvp_context); } return ret; } @@ -568,7 +579,7 @@ response_done: vmbus_sendpacket(channel, recv_buffer, buf_len, req_id, VM_PKT_DATA_INBAND, 0); - + poll_channel(channel); } /* @@ -603,7 +614,7 @@ void hv_kvp_onchannelcallback(void *context) return; } - vmbus_recvpacket(channel, recv_buffer, PAGE_SIZE * 2, &recvlen, + vmbus_recvpacket(channel, recv_buffer, PAGE_SIZE * 4, &recvlen, &requestid); if (recvlen > 0) { diff --git a/drivers/hv/hv_util.c b/drivers/hv/hv_util.c index dd761806f0e8..3b9c9ef0deb8 100644 --- a/drivers/hv/hv_util.c +++ b/drivers/hv/hv_util.c @@ -319,7 +319,7 @@ static int util_probe(struct hv_device *dev, (struct hv_util_service *)dev_id->driver_data; int ret; - srv->recv_buffer = kmalloc(PAGE_SIZE * 2, GFP_KERNEL); + srv->recv_buffer = kmalloc(PAGE_SIZE * 4, GFP_KERNEL); if (!srv->recv_buffer) return -ENOMEM; if (srv->util_init) { -- cgit v1.2.3 From 5a7fbe7e9ea0b1b9d7ffdba64db1faa3a259164c Mon Sep 17 00:00:00 2001 From: Bert Vermeulen Date: Tue, 8 Jul 2014 14:42:23 +0200 Subject: USB: ftdi_sio: Add extra PID. This patch adds PID 0x0003 to the VID 0x128d (Testo). At least the Testo 435-4 uses this, likely other gear as well. Signed-off-by: Bert Vermeulen Cc: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 3 ++- drivers/usb/serial/ftdi_sio_ids.h | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 115662c16dcc..bf2e30a6824a 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -720,7 +720,8 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) }, { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) }, - { USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) }, + { USB_DEVICE(TESTO_VID, TESTO_1_PID) }, + { USB_DEVICE(TESTO_VID, TESTO_3_PID) }, { USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 500474c48f4b..106cc16cc6ed 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -798,7 +798,8 @@ * Submitted by Colin Leroy */ #define TESTO_VID 0x128D -#define TESTO_USB_INTERFACE_PID 0x0001 +#define TESTO_1_PID 0x0001 +#define TESTO_3_PID 0x0003 /* * Mobility Electronics products. -- cgit v1.2.3 From b51ecea852b712618796d9eab8428a7d5f1f106f Mon Sep 17 00:00:00 2001 From: hayeswang Date: Wed, 9 Jul 2014 14:52:51 +0800 Subject: r8169: disable L23 For RTL8411, RTL8111G, RTL8402, RTL8105, and RTL8106, disable the feature of entering the L2/L3 link state of the PCIe. When the nic starts the process of entering the L2/L3 link state and the PCI reset occurs before the work is finished, the work would be queued and continue after the next the PCI reset occurs. This causes the device stays in L2/L3 link state, and the system couldn't find the device. Signed-off-by: Hayes Wang Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index be425ad5e824..06bdc31a828d 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -538,6 +538,7 @@ enum rtl_register_content { MagicPacket = (1 << 5), /* Wake up when receives a Magic Packet */ LinkUp = (1 << 4), /* Wake up when the cable connection is re-established */ Jumbo_En0 = (1 << 2), /* 8168 only. Reserved in the 8168b */ + Rdy_to_L23 = (1 << 1), /* L23 Enable */ Beacon_en = (1 << 0), /* 8168 only. Reserved in the 8168b */ /* Config4 register */ @@ -4897,6 +4898,21 @@ static void rtl_enable_clock_request(struct pci_dev *pdev) PCI_EXP_LNKCTL_CLKREQ_EN); } +static void rtl_pcie_state_l2l3_enable(struct rtl8169_private *tp, bool enable) +{ + void __iomem *ioaddr = tp->mmio_addr; + u8 data; + + data = RTL_R8(Config3); + + if (enable) + data |= Rdy_to_L23; + else + data &= ~Rdy_to_L23; + + RTL_W8(Config3, data); +} + #define R8168_CPCMD_QUIRK_MASK (\ EnableBist | \ Mac_dbgo_oe | \ @@ -5246,6 +5262,7 @@ static void rtl_hw_start_8411(struct rtl8169_private *tp) }; rtl_hw_start_8168f(tp); + rtl_pcie_state_l2l3_enable(tp, false); rtl_ephy_init(tp, e_info_8168f_1, ARRAY_SIZE(e_info_8168f_1)); @@ -5284,6 +5301,8 @@ static void rtl_hw_start_8168g_1(struct rtl8169_private *tp) rtl_w1w0_eri(tp, 0x2fc, ERIAR_MASK_0001, 0x01, 0x06, ERIAR_EXGMAC); rtl_w1w0_eri(tp, 0x1b0, ERIAR_MASK_0011, 0x0000, 0x1000, ERIAR_EXGMAC); + + rtl_pcie_state_l2l3_enable(tp, false); } static void rtl_hw_start_8168g_2(struct rtl8169_private *tp) @@ -5536,6 +5555,8 @@ static void rtl_hw_start_8105e_1(struct rtl8169_private *tp) RTL_W8(DLLPR, RTL_R8(DLLPR) | PFM_EN); rtl_ephy_init(tp, e_info_8105e_1, ARRAY_SIZE(e_info_8105e_1)); + + rtl_pcie_state_l2l3_enable(tp, false); } static void rtl_hw_start_8105e_2(struct rtl8169_private *tp) @@ -5571,6 +5592,8 @@ static void rtl_hw_start_8402(struct rtl8169_private *tp) rtl_eri_write(tp, 0xc0, ERIAR_MASK_0011, 0x0000, ERIAR_EXGMAC); rtl_eri_write(tp, 0xb8, ERIAR_MASK_0011, 0x0000, ERIAR_EXGMAC); rtl_w1w0_eri(tp, 0x0d4, ERIAR_MASK_0011, 0x0e00, 0xff00, ERIAR_EXGMAC); + + rtl_pcie_state_l2l3_enable(tp, false); } static void rtl_hw_start_8106(struct rtl8169_private *tp) @@ -5583,6 +5606,8 @@ static void rtl_hw_start_8106(struct rtl8169_private *tp) RTL_W32(MISC, (RTL_R32(MISC) | DISABLE_LAN_EN) & ~EARLY_TALLY_EN); RTL_W8(MCU, RTL_R8(MCU) | EN_NDP | EN_OOB_RESET); RTL_W8(DLLPR, RTL_R8(DLLPR) & ~PFM_EN); + + rtl_pcie_state_l2l3_enable(tp, false); } static void rtl_hw_start_8101(struct net_device *dev) -- cgit v1.2.3 From 6d827fbcc370ca259a2905309f64161ab7b10596 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 21 Jun 2014 08:08:08 -0700 Subject: i8k: Fix non-SMP operation Commit f36fdb9f0266 (i8k: Force SMM to run on CPU 0) adds support for multi-core CPUs to the driver. Unfortunately, that causes it to fail loading if compiled without SMP support, at least on 32 bit kernels. Kernel log shows "i8k: unable to get SMM Dell signature", and function i8k_smm is found to return -EINVAL. Testing revealed that the culprit is the missing return value check of set_cpus_allowed_ptr. Fixes: f36fdb9f0266 (i8k: Force SMM to run on CPU 0) Reported-by: Jim Bos Tested-by: Jim Bos Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Guenter Roeck Cc: Andreas Mohr Signed-off-by: Greg Kroah-Hartman --- drivers/char/i8k.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c index d915707d2ba1..93dcad0c1cbe 100644 --- a/drivers/char/i8k.c +++ b/drivers/char/i8k.c @@ -138,7 +138,9 @@ static int i8k_smm(struct smm_regs *regs) if (!alloc_cpumask_var(&old_mask, GFP_KERNEL)) return -ENOMEM; cpumask_copy(old_mask, ¤t->cpus_allowed); - set_cpus_allowed_ptr(current, cpumask_of(0)); + rc = set_cpus_allowed_ptr(current, cpumask_of(0)); + if (rc) + goto out; if (smp_processor_id() != 0) { rc = -EBUSY; goto out; -- cgit v1.2.3 From 6ef07a9f369742a7b18c77484411cff0bd790291 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Sun, 8 Jun 2014 10:00:59 +0300 Subject: mlx5_core: Fix possible race between mr tree insert/delete In mlx5_core_destroy_mkey(), we must first remove the mr from the radix tree and then destroy it. Otherwise we might hit a race if the key was reallocated and we attempted to insert it to the radix tree. Also handle radix tree insert/delete failures. Signed-off-by: Sagi Grimberg Reviewed-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/net/ethernet/mellanox/mlx5/core/mr.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mr.c b/drivers/net/ethernet/mellanox/mlx5/core/mr.c index ba0401d4af50..184c3615f479 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/mr.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/mr.c @@ -94,6 +94,11 @@ int mlx5_core_create_mkey(struct mlx5_core_dev *dev, struct mlx5_core_mr *mr, write_lock_irq(&table->lock); err = radix_tree_insert(&table->tree, mlx5_base_mkey(mr->key), mr); write_unlock_irq(&table->lock); + if (err) { + mlx5_core_warn(dev, "failed radix tree insert of mr 0x%x, %d\n", + mlx5_base_mkey(mr->key), err); + mlx5_core_destroy_mkey(dev, mr); + } return err; } @@ -104,12 +109,22 @@ int mlx5_core_destroy_mkey(struct mlx5_core_dev *dev, struct mlx5_core_mr *mr) struct mlx5_mr_table *table = &dev->priv.mr_table; struct mlx5_destroy_mkey_mbox_in in; struct mlx5_destroy_mkey_mbox_out out; + struct mlx5_core_mr *deleted_mr; unsigned long flags; int err; memset(&in, 0, sizeof(in)); memset(&out, 0, sizeof(out)); + write_lock_irqsave(&table->lock, flags); + deleted_mr = radix_tree_delete(&table->tree, mlx5_base_mkey(mr->key)); + write_unlock_irqrestore(&table->lock, flags); + if (!deleted_mr) { + mlx5_core_warn(dev, "failed radix tree delete of mr 0x%x\n", + mlx5_base_mkey(mr->key)); + return -ENOENT; + } + in.hdr.opcode = cpu_to_be16(MLX5_CMD_OP_DESTROY_MKEY); in.mkey = cpu_to_be32(mlx5_mkey_to_idx(mr->key)); err = mlx5_cmd_exec(dev, &in, sizeof(in), &out, sizeof(out)); @@ -119,10 +134,6 @@ int mlx5_core_destroy_mkey(struct mlx5_core_dev *dev, struct mlx5_core_mr *mr) if (out.hdr.status) return mlx5_cmd_status_to_err(&out.hdr); - write_lock_irqsave(&table->lock, flags); - radix_tree_delete(&table->tree, mlx5_base_mkey(mr->key)); - write_unlock_irqrestore(&table->lock, flags); - return err; } EXPORT_SYMBOL(mlx5_core_destroy_mkey); -- cgit v1.2.3 From a12f78c582b5a7a549fbee1a58d5778e651764ad Mon Sep 17 00:00:00 2001 From: Stefan Sørensen Date: Wed, 25 Jun 2014 14:40:16 +0200 Subject: dp83640: Always decode received status frames MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently status frames are only handled when packet timestamping is enabled, but status frames are also needed for pin event timestamping. Fix by moving packet timestamping check to after status frame decode. Signed-off-by: Stefan Sørensen Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/phy/dp83640.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index 6a999e6814a0..9408157a246c 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -1323,15 +1323,15 @@ static bool dp83640_rxtstamp(struct phy_device *phydev, { struct dp83640_private *dp83640 = phydev->priv; - if (!dp83640->hwts_rx_en) - return false; - if (is_status_frame(skb, type)) { decode_status_frame(dp83640, skb); kfree_skb(skb); return true; } + if (!dp83640->hwts_rx_en) + return false; + SKB_PTP_TYPE(skb) = type; skb_queue_tail(&dp83640->rx_queue, skb); schedule_work(&dp83640->ts_work); -- cgit v1.2.3 From b4df480f68ae03b5dd4ab0db56536fbcec741705 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Thu, 10 Jul 2014 11:49:42 +0900 Subject: usbnet: smsc95xx: add reset_resume function with reset operation The smsc95xx needs to resume with reset operation. Otherwise it causes system hang by network error like below after resume. This case appears on odroid u3 board. [ 9.727600] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped [ 9.727648] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped [ 9.727689] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped [ 9.727728] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped [ 9.729486] PM: resume of devices complete after 2011.219 msecs [ 10.117609] Restarting tasks ... done. [ 11.725099] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped [ 13.480846] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped [ 13.481361] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped ... Signed-off-by: Joonyoung Shim Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 424db65e4396..d07bf4cb893f 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1714,6 +1714,18 @@ static int smsc95xx_resume(struct usb_interface *intf) return ret; } +static int smsc95xx_reset_resume(struct usb_interface *intf) +{ + struct usbnet *dev = usb_get_intfdata(intf); + int ret; + + ret = smsc95xx_reset(dev); + if (ret < 0) + return ret; + + return smsc95xx_resume(intf); +} + static void smsc95xx_rx_csum_offload(struct sk_buff *skb) { skb->csum = *(u16 *)(skb_tail_pointer(skb) - 2); @@ -2004,7 +2016,7 @@ static struct usb_driver smsc95xx_driver = { .probe = usbnet_probe, .suspend = smsc95xx_suspend, .resume = smsc95xx_resume, - .reset_resume = smsc95xx_resume, + .reset_resume = smsc95xx_reset_resume, .disconnect = usbnet_disconnect, .disable_hub_initiated_lpm = 1, .supports_autosuspend = 1, -- cgit v1.2.3 From f1a1b63529986d0c8970da182f0935eae059421b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 8 Jul 2014 09:17:16 +0200 Subject: m68k: Fix boot regression on machines with RAM at non-zero My enhancement to store the initial mapping size for later reuse in commit 486df8bc4627bdfc032d11bedcd056cc5343ee62 ("m68k: Increase initial mapping to 8 or 16 MiB if possible") broke booting on machines where RAM doesn't start at address zero. Use pc-relative addressing to fix this. Reported-by: Andreas Schwab Signed-off-by: Geert Uytterhoeven Tested-by: Andreas Schwab --- arch/m68k/kernel/head.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S index dbb118e1a4e0..a54788458ca3 100644 --- a/arch/m68k/kernel/head.S +++ b/arch/m68k/kernel/head.S @@ -921,7 +921,8 @@ L(nocon): jls 1f lsrl #1,%d1 1: - movel %d1,m68k_init_mapped_size + lea %pc@(m68k_init_mapped_size),%a0 + movel %d1,%a0@ mmu_map #PAGE_OFFSET,%pc@(L(phys_kernel_start)),%d1,\ %pc@(m68k_supervisor_cachemode) -- cgit v1.2.3 From 948264879b6894dc389a44b99fae4f0b72932619 Mon Sep 17 00:00:00 2001 From: Todd Fujinaka Date: Thu, 10 Jul 2014 01:47:15 -0700 Subject: igb: Workaround for i210 Errata 25: Slow System Clock On some devices, the internal PLL circuit occasionally provides the wrong clock frequency after power up. The probability of failure is less than one failure per 1000 power cycles. When the failure occurs, the internal clock frequency is around 1/20 of the correct frequency. Cc: stable Signed-off-by: Todd Fujinaka Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/igb/e1000_82575.c | 7 +++ drivers/net/ethernet/intel/igb/e1000_defines.h | 18 +++---- drivers/net/ethernet/intel/igb/e1000_hw.h | 3 ++ drivers/net/ethernet/intel/igb/e1000_i210.c | 66 ++++++++++++++++++++++++++ drivers/net/ethernet/intel/igb/e1000_i210.h | 12 +++++ drivers/net/ethernet/intel/igb/e1000_regs.h | 1 + drivers/net/ethernet/intel/igb/igb_main.c | 14 ++++++ 7 files changed, 113 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index a2db388cc31e..ee74f9536b31 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -1481,6 +1481,13 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw) s32 ret_val; u16 i, rar_count = mac->rar_entry_count; + if ((hw->mac.type >= e1000_i210) && + !(igb_get_flash_presence_i210(hw))) { + ret_val = igb_pll_workaround_i210(hw); + if (ret_val) + return ret_val; + } + /* Initialize identification LED */ ret_val = igb_id_led_init(hw); if (ret_val) { diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index 2a8bb35c2df2..217f8138851b 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -46,14 +46,15 @@ #define E1000_CTRL_EXT_SDP3_DIR 0x00000800 /* SDP3 Data direction */ /* Physical Func Reset Done Indication */ -#define E1000_CTRL_EXT_PFRSTD 0x00004000 -#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 -#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 -#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000 -#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 -#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 -#define E1000_CTRL_EXT_EIAME 0x01000000 -#define E1000_CTRL_EXT_IRCA 0x00000001 +#define E1000_CTRL_EXT_PFRSTD 0x00004000 +#define E1000_CTRL_EXT_SDLPE 0X00040000 /* SerDes Low Power Enable */ +#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 +#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 +#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000 +#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 +#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 +#define E1000_CTRL_EXT_EIAME 0x01000000 +#define E1000_CTRL_EXT_IRCA 0x00000001 /* Interrupt delay cancellation */ /* Driver loaded bit for FW */ #define E1000_CTRL_EXT_DRV_LOAD 0x10000000 @@ -62,6 +63,7 @@ /* packet buffer parity error detection enabled */ /* descriptor FIFO parity error detection enable */ #define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */ +#define E1000_CTRL_EXT_PHYPDEN 0x00100000 #define E1000_I2CCMD_REG_ADDR_SHIFT 16 #define E1000_I2CCMD_PHY_ADDR_SHIFT 24 #define E1000_I2CCMD_OPCODE_READ 0x08000000 diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h index 89925e405849..ce55ea5d750c 100644 --- a/drivers/net/ethernet/intel/igb/e1000_hw.h +++ b/drivers/net/ethernet/intel/igb/e1000_hw.h @@ -567,4 +567,7 @@ struct net_device *igb_get_hw_dev(struct e1000_hw *hw); /* These functions must be implemented by drivers */ s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value); s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value); + +void igb_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value); +void igb_write_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value); #endif /* _E1000_HW_H_ */ diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c index 337161f440dd..65d931669f81 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.c +++ b/drivers/net/ethernet/intel/igb/e1000_i210.c @@ -834,3 +834,69 @@ s32 igb_init_nvm_params_i210(struct e1000_hw *hw) } return ret_val; } + +/** + * igb_pll_workaround_i210 + * @hw: pointer to the HW structure + * + * Works around an errata in the PLL circuit where it occasionally + * provides the wrong clock frequency after power up. + **/ +s32 igb_pll_workaround_i210(struct e1000_hw *hw) +{ + s32 ret_val; + u32 wuc, mdicnfg, ctrl, ctrl_ext, reg_val; + u16 nvm_word, phy_word, pci_word, tmp_nvm; + int i; + + /* Get and set needed register values */ + wuc = rd32(E1000_WUC); + mdicnfg = rd32(E1000_MDICNFG); + reg_val = mdicnfg & ~E1000_MDICNFG_EXT_MDIO; + wr32(E1000_MDICNFG, reg_val); + + /* Get data from NVM, or set default */ + ret_val = igb_read_invm_word_i210(hw, E1000_INVM_AUTOLOAD, + &nvm_word); + if (ret_val) + nvm_word = E1000_INVM_DEFAULT_AL; + tmp_nvm = nvm_word | E1000_INVM_PLL_WO_VAL; + for (i = 0; i < E1000_MAX_PLL_TRIES; i++) { + /* check current state directly from internal PHY */ + igb_read_phy_reg_gs40g(hw, (E1000_PHY_PLL_FREQ_PAGE | + E1000_PHY_PLL_FREQ_REG), &phy_word); + if ((phy_word & E1000_PHY_PLL_UNCONF) + != E1000_PHY_PLL_UNCONF) { + ret_val = 0; + break; + } else { + ret_val = -E1000_ERR_PHY; + } + /* directly reset the internal PHY */ + ctrl = rd32(E1000_CTRL); + wr32(E1000_CTRL, ctrl|E1000_CTRL_PHY_RST); + + ctrl_ext = rd32(E1000_CTRL_EXT); + ctrl_ext |= (E1000_CTRL_EXT_PHYPDEN | E1000_CTRL_EXT_SDLPE); + wr32(E1000_CTRL_EXT, ctrl_ext); + + wr32(E1000_WUC, 0); + reg_val = (E1000_INVM_AUTOLOAD << 4) | (tmp_nvm << 16); + wr32(E1000_EEARBC_I210, reg_val); + + igb_read_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word); + pci_word |= E1000_PCI_PMCSR_D3; + igb_write_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word); + usleep_range(1000, 2000); + pci_word &= ~E1000_PCI_PMCSR_D3; + igb_write_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word); + reg_val = (E1000_INVM_AUTOLOAD << 4) | (nvm_word << 16); + wr32(E1000_EEARBC_I210, reg_val); + + /* restore WUC register */ + wr32(E1000_WUC, wuc); + } + /* restore MDICNFG setting */ + wr32(E1000_MDICNFG, mdicnfg); + return ret_val; +} diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.h b/drivers/net/ethernet/intel/igb/e1000_i210.h index 9f34976687ba..3442b6357d01 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.h +++ b/drivers/net/ethernet/intel/igb/e1000_i210.h @@ -33,6 +33,7 @@ s32 igb_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data); s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data); s32 igb_init_nvm_params_i210(struct e1000_hw *hw); bool igb_get_flash_presence_i210(struct e1000_hw *hw); +s32 igb_pll_workaround_i210(struct e1000_hw *hw); #define E1000_STM_OPCODE 0xDB00 #define E1000_EEPROM_FLASH_SIZE_WORD 0x11 @@ -78,4 +79,15 @@ enum E1000_INVM_STRUCTURE_TYPE { #define NVM_LED_1_CFG_DEFAULT_I211 0x0184 #define NVM_LED_0_2_CFG_DEFAULT_I211 0x200C +/* PLL Defines */ +#define E1000_PCI_PMCSR 0x44 +#define E1000_PCI_PMCSR_D3 0x03 +#define E1000_MAX_PLL_TRIES 5 +#define E1000_PHY_PLL_UNCONF 0xFF +#define E1000_PHY_PLL_FREQ_PAGE 0xFC0000 +#define E1000_PHY_PLL_FREQ_REG 0x000E +#define E1000_INVM_DEFAULT_AL 0x202F +#define E1000_INVM_AUTOLOAD 0x0A +#define E1000_INVM_PLL_WO_VAL 0x0010 + #endif diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h index 1cc4b1a7e597..f5ba4e4eafb9 100644 --- a/drivers/net/ethernet/intel/igb/e1000_regs.h +++ b/drivers/net/ethernet/intel/igb/e1000_regs.h @@ -66,6 +66,7 @@ #define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ #define E1000_PBS 0x01008 /* Packet Buffer Size */ #define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ +#define E1000_EEARBC_I210 0x12024 /* EEPROM Auto Read Bus Control */ #define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ #define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */ #define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */ diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index f145adbb55ac..57a96e00df8c 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -7215,6 +7215,20 @@ static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) } } +void igb_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value) +{ + struct igb_adapter *adapter = hw->back; + + pci_read_config_word(adapter->pdev, reg, value); +} + +void igb_write_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value) +{ + struct igb_adapter *adapter = hw->back; + + pci_write_config_word(adapter->pdev, reg, *value); +} + s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) { struct igb_adapter *adapter = hw->back; -- cgit v1.2.3 From 4237ba43b65aa989674c89fc4f2fe46eebc501ee Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 10 Jul 2014 10:50:19 +0200 Subject: fuse: restructure ->rename2() Make ->rename2() universal, i.e. able to handle zero flags. This is to make future change of the API easier. Signed-off-by: Miklos Szeredi --- fs/fuse/dir.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 202a9721be93..0c6048247a34 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -815,13 +815,6 @@ static int fuse_rename_common(struct inode *olddir, struct dentry *oldent, return err; } -static int fuse_rename(struct inode *olddir, struct dentry *oldent, - struct inode *newdir, struct dentry *newent) -{ - return fuse_rename_common(olddir, oldent, newdir, newent, 0, - FUSE_RENAME, sizeof(struct fuse_rename_in)); -} - static int fuse_rename2(struct inode *olddir, struct dentry *oldent, struct inode *newdir, struct dentry *newent, unsigned int flags) @@ -832,17 +825,30 @@ static int fuse_rename2(struct inode *olddir, struct dentry *oldent, if (flags & ~(RENAME_NOREPLACE | RENAME_EXCHANGE)) return -EINVAL; - if (fc->no_rename2 || fc->minor < 23) - return -EINVAL; + if (flags) { + if (fc->no_rename2 || fc->minor < 23) + return -EINVAL; - err = fuse_rename_common(olddir, oldent, newdir, newent, flags, - FUSE_RENAME2, sizeof(struct fuse_rename2_in)); - if (err == -ENOSYS) { - fc->no_rename2 = 1; - err = -EINVAL; + err = fuse_rename_common(olddir, oldent, newdir, newent, flags, + FUSE_RENAME2, + sizeof(struct fuse_rename2_in)); + if (err == -ENOSYS) { + fc->no_rename2 = 1; + err = -EINVAL; + } + } else { + err = fuse_rename_common(olddir, oldent, newdir, newent, 0, + FUSE_RENAME, + sizeof(struct fuse_rename_in)); } + return err; +} +static int fuse_rename(struct inode *olddir, struct dentry *oldent, + struct inode *newdir, struct dentry *newent) +{ + return fuse_rename2(olddir, oldent, newdir, newent, 0); } static int fuse_link(struct dentry *entry, struct inode *newdir, -- cgit v1.2.3 From 0378c9a855bfa395f595fbfb049707093e270f69 Mon Sep 17 00:00:00 2001 From: Cristian Stoica Date: Mon, 7 Jul 2014 11:52:41 +0300 Subject: crypto: caam - fix memleak in caam_jr module This patch fixes a memory leak that appears when caam_jr module is unloaded. Cc: # 3.13+ Signed-off-by: Cristian Stoica Signed-off-by: Herbert Xu --- drivers/crypto/caam/jr.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c index 1d80bd3636c5..b512a4ba7569 100644 --- a/drivers/crypto/caam/jr.c +++ b/drivers/crypto/caam/jr.c @@ -453,8 +453,8 @@ static int caam_jr_probe(struct platform_device *pdev) int error; jrdev = &pdev->dev; - jrpriv = kmalloc(sizeof(struct caam_drv_private_jr), - GFP_KERNEL); + jrpriv = devm_kmalloc(jrdev, sizeof(struct caam_drv_private_jr), + GFP_KERNEL); if (!jrpriv) return -ENOMEM; @@ -487,10 +487,8 @@ static int caam_jr_probe(struct platform_device *pdev) /* Now do the platform independent part */ error = caam_jr_init(jrdev); /* now turn on hardware */ - if (error) { - kfree(jrpriv); + if (error) return error; - } jrpriv->dev = jrdev; spin_lock(&driver_data.jr_alloc_lock); -- cgit v1.2.3 From 29e2435fd6d71e0136e2c2ff0433b7dbeeaaccfd Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 8 Jul 2014 16:54:18 +0100 Subject: efi: fdt: Do not report an error during boot if UEFI is not available Currently, fdt_find_uefi_params() reports an error if no EFI parameters are found in the DT. This is however a valid case for non-UEFI kernel booting. This patch checks changes the error reporting to a pr_info("UEFI not found") when no EFI parameters are found in the DT. Signed-off-by: Catalin Marinas Acked-by: Leif Lindholm Tested-by: Leif Lindholm Signed-off-by: Matt Fleming --- drivers/firmware/efi/efi.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c index eff1a2f22f09..dc79346689e6 100644 --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -346,6 +346,7 @@ static __initdata struct { struct param_info { int verbose; + int found; void *params; }; @@ -362,16 +363,12 @@ static int __init fdt_find_uefi_params(unsigned long node, const char *uname, (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0)) return 0; - pr_info("Getting parameters from FDT:\n"); - for (i = 0; i < ARRAY_SIZE(dt_params); i++) { prop = of_get_flat_dt_prop(node, dt_params[i].propname, &len); - if (!prop) { - pr_err("Can't find %s in device tree!\n", - dt_params[i].name); + if (!prop) return 0; - } dest = info->params + dt_params[i].offset; + info->found++; val = of_read_number(prop, len / sizeof(u32)); @@ -390,10 +387,21 @@ static int __init fdt_find_uefi_params(unsigned long node, const char *uname, int __init efi_get_fdt_params(struct efi_fdt_params *params, int verbose) { struct param_info info; + int ret; + + pr_info("Getting EFI parameters from FDT:\n"); info.verbose = verbose; + info.found = 0; info.params = params; - return of_scan_flat_dt(fdt_find_uefi_params, &info); + ret = of_scan_flat_dt(fdt_find_uefi_params, &info); + if (!info.found) + pr_info("UEFI not found.\n"); + else if (!ret) + pr_err("Can't find '%s' in device tree!\n", + dt_params[info.found].name); + + return ret; } #endif /* CONFIG_EFI_PARAMS_FROM_FDT */ -- cgit v1.2.3 From c7fb93ec51d462ec3540a729ba446663c26a0505 Mon Sep 17 00:00:00 2001 From: Michael Brown Date: Thu, 10 Jul 2014 12:26:20 +0100 Subject: x86/efi: Include a .bss section within the PE/COFF headers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The PE/COFF headers currently describe only the initialised-data portions of the image, and result in no space being allocated for the uninitialised-data portions. Consequently, the EFI boot stub will end up overwriting unexpected areas of memory, with unpredictable results. Fix by including a .bss section in the PE/COFF headers (functionally equivalent to the init_size field in the bzImage header). Signed-off-by: Michael Brown Cc: Thomas Bächler Cc: Josh Boyer Cc: Signed-off-by: Matt Fleming --- arch/x86/boot/header.S | 26 ++++++++++++++++++++++---- arch/x86/boot/tools/build.c | 38 ++++++++++++++++++++++++++++++-------- 2 files changed, 52 insertions(+), 12 deletions(-) diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S index 84c223479e3c..7a6d43a554d7 100644 --- a/arch/x86/boot/header.S +++ b/arch/x86/boot/header.S @@ -91,10 +91,9 @@ bs_die: .section ".bsdata", "a" bugger_off_msg: - .ascii "Direct floppy boot is not supported. " - .ascii "Use a boot loader program instead.\r\n" + .ascii "Use a boot loader.\r\n" .ascii "\n" - .ascii "Remove disk and press any key to reboot ...\r\n" + .ascii "Remove disk and press any key to reboot...\r\n" .byte 0 #ifdef CONFIG_EFI_STUB @@ -108,7 +107,7 @@ coff_header: #else .word 0x8664 # x86-64 #endif - .word 3 # nr_sections + .word 4 # nr_sections .long 0 # TimeDateStamp .long 0 # PointerToSymbolTable .long 1 # NumberOfSymbols @@ -250,6 +249,25 @@ section_table: .word 0 # NumberOfLineNumbers .long 0x60500020 # Characteristics (section flags) + # + # The offset & size fields are filled in by build.c. + # + .ascii ".bss" + .byte 0 + .byte 0 + .byte 0 + .byte 0 + .long 0 + .long 0x0 + .long 0 # Size of initialized data + # on disk + .long 0x0 + .long 0 # PointerToRelocations + .long 0 # PointerToLineNumbers + .word 0 # NumberOfRelocations + .word 0 # NumberOfLineNumbers + .long 0xc8000080 # Characteristics (section flags) + #endif /* CONFIG_EFI_STUB */ # Kernel attributes; used by setup. This is part 1 of the diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c index 1a2f2121cada..a7661c430cd9 100644 --- a/arch/x86/boot/tools/build.c +++ b/arch/x86/boot/tools/build.c @@ -143,7 +143,7 @@ static void usage(void) #ifdef CONFIG_EFI_STUB -static void update_pecoff_section_header(char *section_name, u32 offset, u32 size) +static void update_pecoff_section_header_fields(char *section_name, u32 vma, u32 size, u32 datasz, u32 offset) { unsigned int pe_header; unsigned short num_sections; @@ -164,10 +164,10 @@ static void update_pecoff_section_header(char *section_name, u32 offset, u32 siz put_unaligned_le32(size, section + 0x8); /* section header vma field */ - put_unaligned_le32(offset, section + 0xc); + put_unaligned_le32(vma, section + 0xc); /* section header 'size of initialised data' field */ - put_unaligned_le32(size, section + 0x10); + put_unaligned_le32(datasz, section + 0x10); /* section header 'file offset' field */ put_unaligned_le32(offset, section + 0x14); @@ -179,6 +179,11 @@ static void update_pecoff_section_header(char *section_name, u32 offset, u32 siz } } +static void update_pecoff_section_header(char *section_name, u32 offset, u32 size) +{ + update_pecoff_section_header_fields(section_name, offset, size, size, offset); +} + static void update_pecoff_setup_and_reloc(unsigned int size) { u32 setup_offset = 0x200; @@ -203,9 +208,6 @@ static void update_pecoff_text(unsigned int text_start, unsigned int file_sz) pe_header = get_unaligned_le32(&buf[0x3c]); - /* Size of image */ - put_unaligned_le32(file_sz, &buf[pe_header + 0x50]); - /* * Size of code: Subtract the size of the first sector (512 bytes) * which includes the header. @@ -220,6 +222,22 @@ static void update_pecoff_text(unsigned int text_start, unsigned int file_sz) update_pecoff_section_header(".text", text_start, text_sz); } +static void update_pecoff_bss(unsigned int file_sz, unsigned int init_sz) +{ + unsigned int pe_header; + unsigned int bss_sz = init_sz - file_sz; + + pe_header = get_unaligned_le32(&buf[0x3c]); + + /* Size of uninitialized data */ + put_unaligned_le32(bss_sz, &buf[pe_header + 0x24]); + + /* Size of image */ + put_unaligned_le32(init_sz, &buf[pe_header + 0x50]); + + update_pecoff_section_header_fields(".bss", file_sz, bss_sz, 0, 0); +} + static int reserve_pecoff_reloc_section(int c) { /* Reserve 0x20 bytes for .reloc section */ @@ -259,6 +277,8 @@ static void efi_stub_entry_update(void) static inline void update_pecoff_setup_and_reloc(unsigned int size) {} static inline void update_pecoff_text(unsigned int text_start, unsigned int file_sz) {} +static inline void update_pecoff_bss(unsigned int file_sz, + unsigned int init_sz) {} static inline void efi_stub_defaults(void) {} static inline void efi_stub_entry_update(void) {} @@ -310,7 +330,7 @@ static void parse_zoffset(char *fname) int main(int argc, char ** argv) { - unsigned int i, sz, setup_sectors; + unsigned int i, sz, setup_sectors, init_sz; int c; u32 sys_size; struct stat sb; @@ -376,7 +396,9 @@ int main(int argc, char ** argv) buf[0x1f1] = setup_sectors-1; put_unaligned_le32(sys_size, &buf[0x1f4]); - update_pecoff_text(setup_sectors * 512, sz + i + ((sys_size * 16) - sz)); + update_pecoff_text(setup_sectors * 512, i + (sys_size * 16)); + init_sz = get_unaligned_le32(&buf[0x260]); + update_pecoff_bss(i + (sys_size * 16), init_sz); efi_stub_entry_update(); -- cgit v1.2.3 From 76252723e88681628a3dbb9c09c963e095476f73 Mon Sep 17 00:00:00 2001 From: Stefan Assmann Date: Thu, 10 Jul 2014 03:29:39 -0700 Subject: igb: do a reset on SR-IOV re-init if device is down To properly re-initialize SR-IOV it is necessary to reset the device even if it is already down. Not doing this may result in Tx unit hangs. Cc: stable Signed-off-by: Stefan Assmann Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/igb/igb_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 57a96e00df8c..a9537ba7a5a0 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -7592,6 +7592,8 @@ static int igb_sriov_reinit(struct pci_dev *dev) if (netif_running(netdev)) igb_close(netdev); + else + igb_reset(adapter); igb_clear_interrupt_scheme(adapter); -- cgit v1.2.3 From acfe0ad74d2e1bfc81d1d7bf5e15b043985d3650 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Sat, 14 Jun 2014 13:44:31 -0400 Subject: dm: allocate a special workqueue for deferred device removal The commit 2c140a246dc ("dm: allow remove to be deferred") introduced a deferred removal feature for the device mapper. When this feature is used (by passing a flag DM_DEFERRED_REMOVE to DM_DEV_REMOVE_CMD ioctl) and the user tries to remove a device that is currently in use, the device will be removed automatically in the future when the last user closes it. Device mapper used the system workqueue to perform deferred removals. However, some targets (dm-raid1, dm-mpath, dm-stripe) flush work items scheduled for the system workqueue from their destructor. If the destructor itself is called from the system workqueue during deferred removal, it introduces a possible deadlock - the workqueue tries to flush itself. Fix this possible deadlock by introducing a new workqueue for deferred removals. We allocate just one workqueue for all dm targets. The ability of dm targets to process IOs isn't dependent on deferred removal of unused targets, so a deadlock due to shared workqueue isn't possible. Also, cleanup local_init() to eliminate potential for returning success on failure. Signed-off-by: Mikulas Patocka Signed-off-by: Dan Carpenter Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # 3.13+ --- drivers/md/dm.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 437d99045ef2..32b958dbc499 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -54,6 +54,8 @@ static void do_deferred_remove(struct work_struct *w); static DECLARE_WORK(deferred_remove_work, do_deferred_remove); +static struct workqueue_struct *deferred_remove_workqueue; + /* * For bio-based dm. * One of these is allocated per bio. @@ -276,16 +278,24 @@ static int __init local_init(void) if (r) goto out_free_rq_tio_cache; + deferred_remove_workqueue = alloc_workqueue("kdmremove", WQ_UNBOUND, 1); + if (!deferred_remove_workqueue) { + r = -ENOMEM; + goto out_uevent_exit; + } + _major = major; r = register_blkdev(_major, _name); if (r < 0) - goto out_uevent_exit; + goto out_free_workqueue; if (!_major) _major = r; return 0; +out_free_workqueue: + destroy_workqueue(deferred_remove_workqueue); out_uevent_exit: dm_uevent_exit(); out_free_rq_tio_cache: @@ -299,6 +309,7 @@ out_free_io_cache: static void local_exit(void) { flush_scheduled_work(); + destroy_workqueue(deferred_remove_workqueue); kmem_cache_destroy(_rq_tio_cache); kmem_cache_destroy(_io_cache); @@ -407,7 +418,7 @@ static void dm_blk_close(struct gendisk *disk, fmode_t mode) if (atomic_dec_and_test(&md->open_count) && (test_bit(DMF_DEFERRED_REMOVE, &md->flags))) - schedule_work(&deferred_remove_work); + queue_work(deferred_remove_workqueue, &deferred_remove_work); dm_put(md); -- cgit v1.2.3 From bf14299f1ce96c9d632533c4557303f8a74afc9e Mon Sep 17 00:00:00 2001 From: Jana Saout Date: Tue, 24 Jun 2014 14:27:04 -0400 Subject: dm crypt, dm zero: update author name following legal name change Signed-off-by: Jana Saout Signed-off-by: Mike Snitzer --- drivers/md/dm-crypt.c | 4 ++-- drivers/md/dm-zero.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 53b213226c01..4cba2d808afb 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2003 Christophe Saout + * Copyright (C) 2003 Jana Saout * Copyright (C) 2004 Clemens Fruhwirth * Copyright (C) 2006-2009 Red Hat, Inc. All rights reserved. * Copyright (C) 2013 Milan Broz @@ -1996,6 +1996,6 @@ static void __exit dm_crypt_exit(void) module_init(dm_crypt_init); module_exit(dm_crypt_exit); -MODULE_AUTHOR("Christophe Saout "); +MODULE_AUTHOR("Jana Saout "); MODULE_DESCRIPTION(DM_NAME " target for transparent encryption / decryption"); MODULE_LICENSE("GPL"); diff --git a/drivers/md/dm-zero.c b/drivers/md/dm-zero.c index c99003e0d47a..b9a64bbce304 100644 --- a/drivers/md/dm-zero.c +++ b/drivers/md/dm-zero.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2003 Christophe Saout + * Copyright (C) 2003 Jana Saout * * This file is released under the GPL. */ @@ -79,6 +79,6 @@ static void __exit dm_zero_exit(void) module_init(dm_zero_init) module_exit(dm_zero_exit) -MODULE_AUTHOR("Christophe Saout "); +MODULE_AUTHOR("Jana Saout "); MODULE_DESCRIPTION(DM_NAME " dummy target returning zeros"); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 10f1d5d111e8aed46a0f1179faf9a3cf422f689e Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Fri, 27 Jun 2014 15:29:04 -0400 Subject: dm io: fix a race condition in the wake up code for sync_io There's a race condition between the atomic_dec_and_test(&io->count) in dec_count() and the waking of the sync_io() thread. If the thread is spuriously woken immediately after the decrement it may exit, making the on stack io struct invalid, yet the dec_count could still be using it. Fix this race by using a completion in sync_io() and dec_count(). Reported-by: Minfei Huang Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Acked-by: Mikulas Patocka Cc: stable@vger.kernel.org --- drivers/md/dm-io.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-) diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c index 3842ac738f98..db404a0f7e2c 100644 --- a/drivers/md/dm-io.c +++ b/drivers/md/dm-io.c @@ -10,6 +10,7 @@ #include #include +#include #include #include #include @@ -32,7 +33,7 @@ struct dm_io_client { struct io { unsigned long error_bits; atomic_t count; - struct task_struct *sleeper; + struct completion *wait; struct dm_io_client *client; io_notify_fn callback; void *context; @@ -121,8 +122,8 @@ static void dec_count(struct io *io, unsigned int region, int error) invalidate_kernel_vmap_range(io->vma_invalidate_address, io->vma_invalidate_size); - if (io->sleeper) - wake_up_process(io->sleeper); + if (io->wait) + complete(io->wait); else { unsigned long r = io->error_bits; @@ -387,6 +388,7 @@ static int sync_io(struct dm_io_client *client, unsigned int num_regions, */ volatile char io_[sizeof(struct io) + __alignof__(struct io) - 1]; struct io *io = (struct io *)PTR_ALIGN(&io_, __alignof__(struct io)); + DECLARE_COMPLETION_ONSTACK(wait); if (num_regions > 1 && (rw & RW_MASK) != WRITE) { WARN_ON(1); @@ -395,7 +397,7 @@ static int sync_io(struct dm_io_client *client, unsigned int num_regions, io->error_bits = 0; atomic_set(&io->count, 1); /* see dispatch_io() */ - io->sleeper = current; + io->wait = &wait; io->client = client; io->vma_invalidate_address = dp->vma_invalidate_address; @@ -403,15 +405,7 @@ static int sync_io(struct dm_io_client *client, unsigned int num_regions, dispatch_io(rw, num_regions, where, dp, io, 1); - while (1) { - set_current_state(TASK_UNINTERRUPTIBLE); - - if (!atomic_read(&io->count)) - break; - - io_schedule(); - } - set_current_state(TASK_RUNNING); + wait_for_completion_io(&wait); if (error_bits) *error_bits = io->error_bits; @@ -434,7 +428,7 @@ static int async_io(struct dm_io_client *client, unsigned int num_regions, io = mempool_alloc(client->pool, GFP_NOIO); io->error_bits = 0; atomic_set(&io->count, 1); /* see dispatch_io() */ - io->sleeper = NULL; + io->wait = NULL; io->client = client; io->callback = fn; io->context = context; -- cgit v1.2.3 From 7a7a3b45fed9a144dbf766ee842a4c5d0632b81d Mon Sep 17 00:00:00 2001 From: Jun'ichi Nomura Date: Tue, 8 Jul 2014 00:55:14 +0000 Subject: dm mpath: fix IO hang due to logic bug in multipath_busy Commit e80991773 ("dm mpath: push back requests instead of queueing") modified multipath_busy() to return true if !pg_ready(). pg_ready() checks the current state of the multipath device and may return false even if a new IO is needed to change the state. Bart Van Assche reported that he had multipath IO lockup when he was performing cable pull tests. Analysis showed that the multipath device had a single path group with both paths active, but that the path group itself was not active. During the multipath device state transitions 'queue_io' got set but nothing could clear it. Clearing 'queue_io' only happens in __choose_pgpath(), but it won't be called if multipath_busy() returns true due to pg_ready() returning false when 'queue_io' is set. As such the !pg_ready() check in multipath_busy() is wrong because new IO will not be sent to multipath target and the multipath state change won't happen. That results in multipath IO lockup. The intent of multipath_busy() is to avoid unnecessary cycles of dequeue + request_fn + requeue if it is known that the multipath device will requeue. Such "busy" situations would be: - path group is being activated - there is no path and the multipath is setup to requeue if no path Fix multipath_busy() to return "busy" early only for these specific situations. Reported-by: Bart Van Assche Tested-by: Bart Van Assche Signed-off-by: Jun'ichi Nomura Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # v3.15 --- drivers/md/dm-mpath.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 3f6fd9d33ba3..f4167b013d99 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -1611,8 +1611,9 @@ static int multipath_busy(struct dm_target *ti) spin_lock_irqsave(&m->lock, flags); - /* pg_init in progress, requeue until done */ - if (!pg_ready(m)) { + /* pg_init in progress or no paths available */ + if (m->pg_init_in_progress || + (!m->nr_valid_paths && m->queue_if_no_path)) { busy = 1; goto out; } -- cgit v1.2.3 From f6be5e64500abbba44e191e1ca0f3366c7d0291b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 3 Jul 2014 11:17:55 -0400 Subject: drm/radeon/dp: return -EIO for flags not zero case If there are error flags in the aux transaction return -EIO rather than -EBUSY. -EIO restarts the whole transaction while -EBUSY jus retries. Fixes problematic aux transfers. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=80684 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index 35f4182c63b6..b1e11f8434e2 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -127,7 +127,7 @@ static int radeon_process_aux_ch(struct radeon_i2c_chan *chan, /* flags not zero */ if (args.v1.ucReplyStatus == 2) { DRM_DEBUG_KMS("dp_aux_ch flags not zero\n"); - r = -EBUSY; + r = -EIO; goto done; } -- cgit v1.2.3 From 9b7d786b900baf7c0d1a7e211570aef1cb27590f Mon Sep 17 00:00:00 2001 From: Christian König Date: Mon, 7 Jul 2014 11:16:29 +0200 Subject: drm/radeon: only print meaningful VM faults MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/cik.c | 6 ++++-- drivers/gpu/drm/radeon/evergreen.c | 6 ++++-- drivers/gpu/drm/radeon/si.c | 6 ++++-- 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index dcd4518a9b08..0b2471107137 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -7676,14 +7676,16 @@ restart_ih: addr = RREG32(VM_CONTEXT1_PROTECTION_FAULT_ADDR); status = RREG32(VM_CONTEXT1_PROTECTION_FAULT_STATUS); mc_client = RREG32(VM_CONTEXT1_PROTECTION_FAULT_MCCLIENT); + /* reset addr and status */ + WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1); + if (addr == 0x0 && status == 0x0) + break; dev_err(rdev->dev, "GPU fault detected: %d 0x%08x\n", src_id, src_data); dev_err(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x%08X\n", addr); dev_err(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x%08X\n", status); cik_vm_decode_fault(rdev, status, addr, mc_client); - /* reset addr and status */ - WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1); break; case 167: /* VCE */ DRM_DEBUG("IH: VCE int: 0x%08x\n", src_data); diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index e2f605224e8c..d5d4d3a86731 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -5066,14 +5066,16 @@ restart_ih: case 147: addr = RREG32(VM_CONTEXT1_PROTECTION_FAULT_ADDR); status = RREG32(VM_CONTEXT1_PROTECTION_FAULT_STATUS); + /* reset addr and status */ + WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1); + if (addr == 0x0 && status == 0x0) + break; dev_err(rdev->dev, "GPU fault detected: %d 0x%08x\n", src_id, src_data); dev_err(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x%08X\n", addr); dev_err(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x%08X\n", status); cayman_vm_decode_fault(rdev, status, addr); - /* reset addr and status */ - WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1); break; case 176: /* CP_INT in ring buffer */ case 177: /* CP_INT in IB1 */ diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 730cee2c34cf..eba0225259a4 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -6376,14 +6376,16 @@ restart_ih: case 147: addr = RREG32(VM_CONTEXT1_PROTECTION_FAULT_ADDR); status = RREG32(VM_CONTEXT1_PROTECTION_FAULT_STATUS); + /* reset addr and status */ + WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1); + if (addr == 0x0 && status == 0x0) + break; dev_err(rdev->dev, "GPU fault detected: %d 0x%08x\n", src_id, src_data); dev_err(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x%08X\n", addr); dev_err(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x%08X\n", status); si_vm_decode_fault(rdev, status, addr); - /* reset addr and status */ - WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1); break; case 176: /* RINGID0 CP_INT */ radeon_fence_process(rdev, RADEON_RING_TYPE_GFX_INDEX); -- cgit v1.2.3 From 6abafb78f9881b4891baf74ab4e9f090ae45230e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 7 Jul 2014 17:59:37 -0400 Subject: drm/radeon: fix typo in golden register setup on evergreen Fixes hangs on driver load on some cards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76998 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/evergreen.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index d5d4d3a86731..f7ece0ff431b 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -189,7 +189,7 @@ static const u32 evergreen_golden_registers[] = 0x8c1c, 0xffffffff, 0x00001010, 0x28350, 0xffffffff, 0x00000000, 0xa008, 0xffffffff, 0x00010000, - 0x5cc, 0xffffffff, 0x00000001, + 0x5c4, 0xffffffff, 0x00000001, 0x9508, 0xffffffff, 0x00000002, 0x913c, 0x0000000f, 0x0000000a }; @@ -476,7 +476,7 @@ static const u32 cedar_golden_registers[] = 0x8c1c, 0xffffffff, 0x00001010, 0x28350, 0xffffffff, 0x00000000, 0xa008, 0xffffffff, 0x00010000, - 0x5cc, 0xffffffff, 0x00000001, + 0x5c4, 0xffffffff, 0x00000001, 0x9508, 0xffffffff, 0x00000002 }; @@ -635,7 +635,7 @@ static const u32 juniper_mgcg_init[] = static const u32 supersumo_golden_registers[] = { 0x5eb4, 0xffffffff, 0x00000002, - 0x5cc, 0xffffffff, 0x00000001, + 0x5c4, 0xffffffff, 0x00000001, 0x7030, 0xffffffff, 0x00000011, 0x7c30, 0xffffffff, 0x00000011, 0x6104, 0x01000300, 0x00000000, @@ -719,7 +719,7 @@ static const u32 sumo_golden_registers[] = static const u32 wrestler_golden_registers[] = { 0x5eb4, 0xffffffff, 0x00000002, - 0x5cc, 0xffffffff, 0x00000001, + 0x5c4, 0xffffffff, 0x00000001, 0x7030, 0xffffffff, 0x00000011, 0x7c30, 0xffffffff, 0x00000011, 0x6104, 0x01000300, 0x00000000, -- cgit v1.2.3 From ed96377132e564d797c48a5490fd46bed01c4273 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 8 Jul 2014 18:25:25 -0400 Subject: drm/radeon: fix typo in ci_stop_dpm() Need to use the RREG32_SMC() accessor since the register is an smc indirect index. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/ci_dpm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/ci_dpm.c b/drivers/gpu/drm/radeon/ci_dpm.c index 10dae4106c08..584090ac3eb9 100644 --- a/drivers/gpu/drm/radeon/ci_dpm.c +++ b/drivers/gpu/drm/radeon/ci_dpm.c @@ -1179,7 +1179,7 @@ static int ci_stop_dpm(struct radeon_device *rdev) tmp &= ~GLOBAL_PWRMGT_EN; WREG32_SMC(GENERAL_PWRMGT, tmp); - tmp = RREG32(SCLK_PWRMGT_CNTL); + tmp = RREG32_SMC(SCLK_PWRMGT_CNTL); tmp &= ~DYNAMIC_PM_EN; WREG32_SMC(SCLK_PWRMGT_CNTL, tmp); -- cgit v1.2.3 From 41959341ac7e33dd360c7a881d13566f9eca37b2 Mon Sep 17 00:00:00 2001 From: Alexandre Demers Date: Tue, 8 Jul 2014 22:27:36 -0400 Subject: drm/radeon/dpm: Reenabling SS on Cayman It reverts commit c745fe611ca42295c9d91d8e305d27983e9132ef now that Cayman is stable since VDDCI fix. Spread spectrum was not the culprit. This depends on b0880e87c1fd038b84498944f52e52c3e86ebe59 (drm/radeon/dpm: fix vddci setup typo on cayman). Signed-off-by: Alexandre Demers Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/rv770_dpm.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/gpu/drm/radeon/rv770_dpm.c b/drivers/gpu/drm/radeon/rv770_dpm.c index da041a43d82e..3c76e1dcdf04 100644 --- a/drivers/gpu/drm/radeon/rv770_dpm.c +++ b/drivers/gpu/drm/radeon/rv770_dpm.c @@ -2329,12 +2329,6 @@ void rv770_get_engine_memory_ss(struct radeon_device *rdev) pi->mclk_ss = radeon_atombios_get_asic_ss_info(rdev, &ss, ASIC_INTERNAL_MEMORY_SS, 0); - /* disable ss, causes hangs on some cayman boards */ - if (rdev->family == CHIP_CAYMAN) { - pi->sclk_ss = false; - pi->mclk_ss = false; - } - if (pi->sclk_ss || pi->mclk_ss) pi->dynamic_ss = true; else -- cgit v1.2.3 From 9f88b906b4455465d60ac18b8c95904f320038d5 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 3 Jul 2014 15:34:38 +0100 Subject: x86-64, vdso: Fix vDSO build breakage due to empty .rela.dyn Certain ld versions (observed with 2.20.0) put an empty .rela.dyn section into shared object files, breaking the assumption on the number of sections to be copied to the final output. Simply discard any empty SHT_REL and SHT_RELA sections to address this. Signed-off-by: Jan Beulich Link: http://lkml.kernel.org/r/53B5861E02000078000204D1@mail.emea.novell.com Acked-by: Andy Lutomirski Tested-by: Boris Ostrovsky Tested-by: Andrew Morton Signed-off-by: H. Peter Anvin --- arch/x86/vdso/vdso2c.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/vdso/vdso2c.h index df95a2fdff73..11b65d4f9414 100644 --- a/arch/x86/vdso/vdso2c.h +++ b/arch/x86/vdso/vdso2c.h @@ -93,6 +93,9 @@ static void BITSFUNC(copy_section)(struct BITSFUNC(fake_sections) *out, uint64_t flags = GET_LE(&in->sh_flags); bool copy = flags & SHF_ALLOC && + (GET_LE(&in->sh_size) || + (GET_LE(&in->sh_type) != SHT_RELA && + GET_LE(&in->sh_type) != SHT_REL)) && strcmp(name, ".altinstructions") && strcmp(name, ".altinstr_replacement"); -- cgit v1.2.3 From c760569d0e9c06b39dd19e82bff0b704d90a73b7 Mon Sep 17 00:00:00 2001 From: Prathyush K Date: Fri, 11 Jul 2014 08:02:15 +0900 Subject: ARM: EXYNOS: Add support for clock handling in power domain While powering on/off a local powerdomain in exynos5 chipsets, the input clocks to each device gets modified. This behaviour is based on the SYSCLK_SYS_PWR_REG registers. E.g. SYSCLK_MFC_SYS_PWR_REG = 0x0, the parent of input clock to MFC (aclk333) gets modified to oscclk = 0x1, no change in clocks. The recommended value of SYSCLK_SYS_PWR_REG before power gating any domain is 0x0. So we must also restore the clocks while powering on a domain everytime. This patch adds the framework for getting the required mux and parent clocks through a power domain device node. With this patch, while powering off a domain, parent is set to oscclk and while powering back on, its re-set to the correct parent which is as per the recommended pd on/off sequence. Signed-off-by: Prathyush K Signed-off-by: Andrew Bresticker Signed-off-by: Arun Kumar K Signed-off-by: Shaik Ameer Basha Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- .../bindings/arm/exynos/power_domain.txt | 20 +++++++ arch/arm/mach-exynos/pm_domains.c | 61 +++++++++++++++++++++- 2 files changed, 80 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt index 5216b419016a..8b4f7b7fe88b 100644 --- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt @@ -9,6 +9,18 @@ Required Properties: - reg: physical base address of the controller and length of memory mapped region. +Optional Properties: +- clocks: List of clock handles. The parent clocks of the input clocks to the + devices in this power domain are set to oscclk before power gating + and restored back after powering on a domain. This is required for + all domains which are powered on and off and not required for unused + domains. +- clock-names: The following clocks can be specified: + - oscclk: Oscillator clock. + - pclkN, clkN: Pairs of parent of input clock and input clock to the + devices in this power domain. Maximum of 4 pairs (N = 0 to 3) + are supported currently. + Node of a device using power domains must have a samsung,power-domain property defined with a phandle to respective power domain. @@ -19,6 +31,14 @@ Example: reg = <0x10023C00 0x10>; }; + mfc_pd: power-domain@10044060 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044060 0x20>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>, + <&clock CLK_MOUT_USER_ACLK333>; + clock-names = "oscclk", "pclk0", "clk0"; + }; + Example of the node using power domain: node { diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index fe6570ebbdde..797cb134bfff 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -24,6 +25,8 @@ #include "regs-pmu.h" +#define MAX_CLK_PER_DOMAIN 4 + /* * Exynos specific wrapper around the generic power domain */ @@ -32,6 +35,9 @@ struct exynos_pm_domain { char const *name; bool is_off; struct generic_pm_domain pd; + struct clk *oscclk; + struct clk *clk[MAX_CLK_PER_DOMAIN]; + struct clk *pclk[MAX_CLK_PER_DOMAIN]; }; static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) @@ -44,6 +50,19 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) pd = container_of(domain, struct exynos_pm_domain, pd); base = pd->base; + /* Set oscclk before powering off a domain*/ + if (!power_on) { + int i; + + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + if (IS_ERR(pd->clk[i])) + break; + if (clk_set_parent(pd->clk[i], pd->oscclk)) + pr_err("%s: error setting oscclk as parent to clock %d\n", + pd->name, i); + } + } + pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0; __raw_writel(pwr, base); @@ -60,6 +79,20 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) cpu_relax(); usleep_range(80, 100); } + + /* Restore clocks after powering on a domain*/ + if (power_on) { + int i; + + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + if (IS_ERR(pd->clk[i])) + break; + if (clk_set_parent(pd->clk[i], pd->pclk[i])) + pr_err("%s: error setting parent to clock%d\n", + pd->name, i); + } + } + return 0; } @@ -152,9 +185,11 @@ static __init int exynos4_pm_init_power_domain(void) for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { struct exynos_pm_domain *pd; - int on; + int on, i; + struct device *dev; pdev = of_find_device_by_node(np); + dev = &pdev->dev; pd = kzalloc(sizeof(*pd), GFP_KERNEL); if (!pd) { @@ -170,6 +205,30 @@ static __init int exynos4_pm_init_power_domain(void) pd->pd.power_on = exynos_pd_power_on; pd->pd.of_node = np; + pd->oscclk = clk_get(dev, "oscclk"); + if (IS_ERR(pd->oscclk)) + goto no_clk; + + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + char clk_name[8]; + + snprintf(clk_name, sizeof(clk_name), "clk%d", i); + pd->clk[i] = clk_get(dev, clk_name); + if (IS_ERR(pd->clk[i])) + break; + snprintf(clk_name, sizeof(clk_name), "pclk%d", i); + pd->pclk[i] = clk_get(dev, clk_name); + if (IS_ERR(pd->pclk[i])) { + clk_put(pd->clk[i]); + pd->clk[i] = ERR_PTR(-EINVAL); + break; + } + } + + if (IS_ERR(pd->clk[0])) + clk_put(pd->oscclk); + +no_clk: platform_set_drvdata(pdev, pd); on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN; -- cgit v1.2.3 From c0fb262bf226a5c943e4309662353d5fb905310a Mon Sep 17 00:00:00 2001 From: Arun Kumar K Date: Fri, 11 Jul 2014 08:03:59 +0900 Subject: clk: exynos5420: Add IDs for clocks used in PD mfc Adds IDs for MUX clocks to be used by power domain for MFC for doing re-parenting while pd on/off. Signed-off-by: Arun Kumar K Signed-off-by: Shaik Ameer Basha Acked-by: Tomasz Figa Signed-off-by: Kukjin Kim --- drivers/clk/samsung/clk-exynos5420.c | 6 ++++-- include/dt-bindings/clock/exynos5420.h | 2 ++ 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c index 9d7d7eed03fd..f74f882f7f29 100644 --- a/drivers/clk/samsung/clk-exynos5420.c +++ b/drivers/clk/samsung/clk-exynos5420.c @@ -631,7 +631,8 @@ static struct samsung_mux_clock exynos5x_mux_clks[] __initdata = { SRC_TOP4, 16, 1), MUX(0, "mout_user_aclk266", mout_user_aclk266_p, SRC_TOP4, 20, 1), MUX(0, "mout_user_aclk166", mout_user_aclk166_p, SRC_TOP4, 24, 1), - MUX(0, "mout_user_aclk333", mout_user_aclk333_p, SRC_TOP4, 28, 1), + MUX(CLK_MOUT_USER_ACLK333, "mout_user_aclk333", mout_user_aclk333_p, + SRC_TOP4, 28, 1), MUX(0, "mout_user_aclk400_disp1", mout_user_aclk400_disp1_p, SRC_TOP5, 0, 1), @@ -684,7 +685,8 @@ static struct samsung_mux_clock exynos5x_mux_clks[] __initdata = { SRC_TOP11, 12, 1), MUX(0, "mout_sw_aclk266", mout_sw_aclk266_p, SRC_TOP11, 20, 1), MUX(0, "mout_sw_aclk166", mout_sw_aclk166_p, SRC_TOP11, 24, 1), - MUX(0, "mout_sw_aclk333", mout_sw_aclk333_p, SRC_TOP11, 28, 1), + MUX(CLK_MOUT_SW_ACLK333, "mout_sw_aclk333", mout_sw_aclk333_p, + SRC_TOP11, 28, 1), MUX(0, "mout_sw_aclk400_disp1", mout_sw_aclk400_disp1_p, SRC_TOP12, 4, 1), diff --git a/include/dt-bindings/clock/exynos5420.h b/include/dt-bindings/clock/exynos5420.h index 97dcb89d37d3..3fc08ff24fa9 100644 --- a/include/dt-bindings/clock/exynos5420.h +++ b/include/dt-bindings/clock/exynos5420.h @@ -203,6 +203,8 @@ #define CLK_MOUT_G3D 641 #define CLK_MOUT_VPLL 642 #define CLK_MOUT_MAUDIO0 643 +#define CLK_MOUT_USER_ACLK333 644 +#define CLK_MOUT_SW_ACLK333 645 /* divider clocks */ #define CLK_DOUT_PIXEL 768 -- cgit v1.2.3 From cacaeb829385ef57b267c8e30308360a89994c1f Mon Sep 17 00:00:00 2001 From: Arun Kumar K Date: Fri, 11 Jul 2014 08:04:03 +0900 Subject: ARM: dts: Add clock property for mfc_pd in exynos5420 Adding the optional clock property for the mfc_pd for handling the re-parenting while pd on/off. Signed-off-by: Arun Kumar K Signed-off-by: Shaik Ameer Basha Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 79e9119d3f8d..15957227ffda 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -260,6 +260,9 @@ mfc_pd: power-domain@10044060 { compatible = "samsung,exynos4210-pd"; reg = <0x10044060 0x20>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>, + <&clock CLK_MOUT_USER_ACLK333>; + clock-names = "oscclk", "pclk0", "clk0"; }; disp_pd: power-domain@100440C0 { -- cgit v1.2.3 From d093601be5e97d2729614419d0d256ed3b6a56b0 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 3 Jul 2014 15:35:07 +0100 Subject: x86-32, vdso: Fix vDSO build error due to missing align_vdso_addr() Relying on static functions used just once to get inlined (and subsequently have dead code paths eliminated) is wrong: Compilers are free to decide whether they do this, regardless of optimization level. With this not happening for vdso_addr() (observed with gcc 4.1.x), an unresolved reference to align_vdso_addr() causes the build to fail. [ hpa: vdso_addr() is never actually used on x86-32, as calculate_addr in map_vdso() is always false. It ought to be possible to clean this up further, but this fixes the immediate problem. ] Signed-off-by: Jan Beulich Link: http://lkml.kernel.org/r/53B5863B02000078000204D5@mail.emea.novell.com Acked-by: Andy Lutomirski Tested-by: Boris Ostrovsky Tested-by: Andrew Morton Signed-off-by: H. Peter Anvin --- arch/x86/vdso/vma.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c index e1513c47872a..5a5176de8d0a 100644 --- a/arch/x86/vdso/vma.c +++ b/arch/x86/vdso/vma.c @@ -62,6 +62,9 @@ struct linux_binprm; Only used for the 64-bit and x32 vdsos. */ static unsigned long vdso_addr(unsigned long start, unsigned len) { +#ifdef CONFIG_X86_32 + return 0; +#else unsigned long addr, end; unsigned offset; end = (start + PMD_SIZE - 1) & PMD_MASK; @@ -83,6 +86,7 @@ static unsigned long vdso_addr(unsigned long start, unsigned len) addr = align_vdso_addr(addr); return addr; +#endif } static int map_vdso(const struct vdso_image *image, bool calculate_addr) -- cgit v1.2.3 From bed7118988ef48063c72f67cc2701c72663b3870 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 11 Jul 2014 08:15:32 +0900 Subject: ARM: EXYNOS: Register cpuidle device only on exynos4210 and 5250 Currently, the exynos cpuidle driver works correctly only on exynos4210 and 5250. Trying to use it with just one CPU online on any other exynos SoCs will lead to system failure, due to unsupported AFTR mode on other SoCs. This patch fixes the problem by registering the driver only on supported SoCs and letting others simply use default WFI mode until support for them is added. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/exynos.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index f38cf7c110cc..176bbf574d45 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -173,10 +173,8 @@ static struct platform_device exynos_cpuidle = { void __init exynos_cpuidle_init(void) { - if (soc_is_exynos5440()) - return; - - platform_device_register(&exynos_cpuidle); + if (soc_is_exynos4210() || soc_is_exynos5250()) + platform_device_register(&exynos_cpuidle); } void __init exynos_cpufreq_init(void) -- cgit v1.2.3 From c557d392fbf5badd693ea1946a4317c87a26a716 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 6 Jul 2014 11:29:52 -0400 Subject: serial: Test for no tx data on tx restart Commit 717f3bbab3c7628736ef738fdbf3d9a28578c26c, 'serial_core: Fix conditional start_tx on ring buffer not empty' exposes an incorrect assumption in several drivers' start_tx methods; the tx ring buffer can, in fact, be empty when restarting tx while performing flow control. Affected drivers: sunsab.c ip22zilog.c pmac_zilog.c sunzilog.c m32r_sio.c imx.c Other in-tree serial drivers either are not affected or already test for empty tx ring buffer before transmitting. Test for empty tx ring buffer in start_tx() method, after transmitting x_char (if applicable). Reported-by: Aaro Koskinen Cc: Seth Bollinger Cc: "David S. Miller" Cc: Sam Ravnborg Cc: Thomas Bogendoerfer Signed-off-by: Peter Hurley Cc: stable # 3.15 Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 3 +++ drivers/tty/serial/ip22zilog.c | 2 ++ drivers/tty/serial/m32r_sio.c | 8 +++++--- drivers/tty/serial/pmac_zilog.c | 3 +++ drivers/tty/serial/sunsab.c | 3 +++ drivers/tty/serial/sunzilog.c | 2 ++ 6 files changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index e2f93874989b..56bd9aa56151 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -567,6 +567,9 @@ static void imx_start_tx(struct uart_port *port) struct imx_port *sport = (struct imx_port *)port; unsigned long temp; + if (uart_circ_empty(&port.state->xmit)) + return; + if (USE_IRDA(sport)) { /* half duplex in IrDA mode; have to disable receive mode */ temp = readl(sport->port.membase + UCR4); diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c index 1efd4c36ba0c..99b7b8697861 100644 --- a/drivers/tty/serial/ip22zilog.c +++ b/drivers/tty/serial/ip22zilog.c @@ -603,6 +603,8 @@ static void ip22zilog_start_tx(struct uart_port *port) } else { struct circ_buf *xmit = &port->state->xmit; + if (uart_circ_empty(xmit)) + return; writeb(xmit->buf[xmit->tail], &channel->data); ZSDELAY(); ZS_WSYNC(channel); diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c index 68f2c53e0b54..5702828fb62e 100644 --- a/drivers/tty/serial/m32r_sio.c +++ b/drivers/tty/serial/m32r_sio.c @@ -266,9 +266,11 @@ static void m32r_sio_start_tx(struct uart_port *port) if (!(up->ier & UART_IER_THRI)) { up->ier |= UART_IER_THRI; serial_out(up, UART_IER, up->ier); - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; + if (!uart_circ_empty(xmit)) { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + } } while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY); #else diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 8193635103ee..f7ad5b903055 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -653,6 +653,8 @@ static void pmz_start_tx(struct uart_port *port) } else { struct circ_buf *xmit = &port->state->xmit; + if (uart_circ_empty(xmit)) + goto out; write_zsdata(uap, xmit->buf[xmit->tail]); zssync(uap); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -661,6 +663,7 @@ static void pmz_start_tx(struct uart_port *port) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&uap->port); } + out: pmz_debug("pmz: start_tx() done.\n"); } diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c index 80a58eca785b..2f57df9a71d9 100644 --- a/drivers/tty/serial/sunsab.c +++ b/drivers/tty/serial/sunsab.c @@ -427,6 +427,9 @@ static void sunsab_start_tx(struct uart_port *port) struct circ_buf *xmit = &up->port.state->xmit; int i; + if (uart_circ_empty(xmit)) + return; + up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); writeb(up->interrupt_mask1, &up->regs->w.imr1); diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c index a85db8b87156..02df3940b95e 100644 --- a/drivers/tty/serial/sunzilog.c +++ b/drivers/tty/serial/sunzilog.c @@ -703,6 +703,8 @@ static void sunzilog_start_tx(struct uart_port *port) } else { struct circ_buf *xmit = &port->state->xmit; + if (uart_circ_empty(xmit)) + return; writeb(xmit->buf[xmit->tail], &channel->data); ZSDELAY(); ZS_WSYNC(channel); -- cgit v1.2.3 From 99ecb001f52ef10ebf686d4e55b1cf64b1e56aa6 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 6 Jul 2014 11:29:53 -0400 Subject: serial: arc_uart: Use uart_circ_empty() for open-coded comparison Replace open-coded test for empty tx ring buffer with equivalent helper function, uart_circ_empty(). No functional change. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/arc_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c index c9f5c9dcc15c..008c223eaf26 100644 --- a/drivers/tty/serial/arc_uart.c +++ b/drivers/tty/serial/arc_uart.c @@ -177,7 +177,7 @@ static void arc_serial_tx_chars(struct arc_uart_port *uart) uart->port.icount.tx++; uart->port.x_char = 0; sent = 1; - } else if (xmit->tail != xmit->head) { /* TODO: uart_circ_empty */ + } else if (!uart_circ_empty(xmit)) { ch = xmit->buf[xmit->tail]; xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); uart->port.icount.tx++; -- cgit v1.2.3 From e623fbf1c4c140764e084e9159a352750c035d44 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 8 Jul 2014 16:00:09 +1000 Subject: powerpc/cell: Fix compilation with CONFIG_COREDUMP=n Commit 046d662f4818 "coredump: make core dump functionality optional" made the coredump optional, but didn't update the spufs code that depends on it. That leads to build errors such as: arch/powerpc/platforms/built-in.o: In function `.spufs_arch_write_note': coredump.c:(.text+0x22cd4): undefined reference to `.dump_emit' coredump.c:(.text+0x22cf4): undefined reference to `.dump_emit' coredump.c:(.text+0x22d0c): undefined reference to `.dump_align' coredump.c:(.text+0x22d48): undefined reference to `.dump_emit' coredump.c:(.text+0x22e7c): undefined reference to `.dump_skip' Fix it by adding some ifdefs in the cell code. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/cell/spu_syscalls.c | 2 ++ arch/powerpc/platforms/cell/spufs/Makefile | 3 ++- arch/powerpc/platforms/cell/spufs/syscalls.c | 6 ++++-- 3 files changed, 8 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/platforms/cell/spu_syscalls.c b/arch/powerpc/platforms/cell/spu_syscalls.c index 38e0a1a5cec3..5e6e0bad6db6 100644 --- a/arch/powerpc/platforms/cell/spu_syscalls.c +++ b/arch/powerpc/platforms/cell/spu_syscalls.c @@ -111,6 +111,7 @@ asmlinkage long sys_spu_run(int fd, __u32 __user *unpc, __u32 __user *ustatus) return ret; } +#ifdef CONFIG_COREDUMP int elf_coredump_extra_notes_size(void) { struct spufs_calls *calls; @@ -142,6 +143,7 @@ int elf_coredump_extra_notes_write(struct coredump_params *cprm) return ret; } +#endif void notify_spus_active(void) { diff --git a/arch/powerpc/platforms/cell/spufs/Makefile b/arch/powerpc/platforms/cell/spufs/Makefile index b9d5d678aa44..52a7d2596d30 100644 --- a/arch/powerpc/platforms/cell/spufs/Makefile +++ b/arch/powerpc/platforms/cell/spufs/Makefile @@ -1,8 +1,9 @@ obj-$(CONFIG_SPU_FS) += spufs.o -spufs-y += inode.o file.o context.o syscalls.o coredump.o +spufs-y += inode.o file.o context.o syscalls.o spufs-y += sched.o backing_ops.o hw_ops.o run.o gang.o spufs-y += switch.o fault.o lscsa_alloc.o +spufs-$(CONFIG_COREDUMP) += coredump.o # magic for the trace events CFLAGS_sched.o := -I$(src) diff --git a/arch/powerpc/platforms/cell/spufs/syscalls.c b/arch/powerpc/platforms/cell/spufs/syscalls.c index b045fdda4845..a87200a535fa 100644 --- a/arch/powerpc/platforms/cell/spufs/syscalls.c +++ b/arch/powerpc/platforms/cell/spufs/syscalls.c @@ -79,8 +79,10 @@ static long do_spu_create(const char __user *pathname, unsigned int flags, struct spufs_calls spufs_calls = { .create_thread = do_spu_create, .spu_run = do_spu_run, - .coredump_extra_notes_size = spufs_coredump_extra_notes_size, - .coredump_extra_notes_write = spufs_coredump_extra_notes_write, .notify_spus_active = do_notify_spus_active, .owner = THIS_MODULE, +#ifdef CONFIG_COREDUMP + .coredump_extra_notes_size = spufs_coredump_extra_notes_size, + .coredump_extra_notes_write = spufs_coredump_extra_notes_write, +#endif }; -- cgit v1.2.3 From cd68098bcedd432f21013b2a3b0737b9222da363 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 8 Jul 2014 17:10:45 +1000 Subject: powerpc: Clean up MMU_FTRS_A2 and MMU_FTR_TYPE_3E In fb5a515704d7 "powerpc: Remove platforms/wsp and associated pieces", we removed the last user of MMU_FTRS_A2. So remove it. MMU_FTRS_A2 was the last user of MMU_FTR_TYPE_3E, so remove it also. This leaves some unreachable code in mmu_context_nohash.c, so remove that also. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mmu.h | 10 +--------- arch/powerpc/mm/mmu_context_nohash.c | 12 +----------- 2 files changed, 2 insertions(+), 20 deletions(-) diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index f8d1d6dcf7db..e61f24ed4e65 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -19,8 +19,7 @@ #define MMU_FTR_TYPE_40x ASM_CONST(0x00000004) #define MMU_FTR_TYPE_44x ASM_CONST(0x00000008) #define MMU_FTR_TYPE_FSL_E ASM_CONST(0x00000010) -#define MMU_FTR_TYPE_3E ASM_CONST(0x00000020) -#define MMU_FTR_TYPE_47x ASM_CONST(0x00000040) +#define MMU_FTR_TYPE_47x ASM_CONST(0x00000020) /* * This is individual features @@ -106,13 +105,6 @@ MMU_FTR_CI_LARGE_PAGE #define MMU_FTRS_PA6T MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \ MMU_FTR_CI_LARGE_PAGE | MMU_FTR_NO_SLBIE_B -#define MMU_FTRS_A2 MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX | \ - MMU_FTR_USE_TLBIVAX_BCAST | \ - MMU_FTR_LOCK_BCAST_INVAL | \ - MMU_FTR_USE_TLBRSRV | \ - MMU_FTR_USE_PAIRED_MAS | \ - MMU_FTR_TLBIEL | \ - MMU_FTR_16M_PAGE #ifndef __ASSEMBLY__ #include diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index af3d78e19302..928ebe79668b 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -410,17 +410,7 @@ void __init mmu_context_init(void) } else if (mmu_has_feature(MMU_FTR_TYPE_47x)) { first_context = 1; last_context = 65535; - } else -#ifdef CONFIG_PPC_BOOK3E_MMU - if (mmu_has_feature(MMU_FTR_TYPE_3E)) { - u32 mmucfg = mfspr(SPRN_MMUCFG); - u32 pid_bits = (mmucfg & MMUCFG_PIDSIZE_MASK) - >> MMUCFG_PIDSIZE_SHIFT; - first_context = 1; - last_context = (1UL << (pid_bits + 1)) - 1; - } else -#endif - { + } else { first_context = 1; last_context = 255; } -- cgit v1.2.3 From c733cf83bbd2b0978456822cdac8c726085dcc14 Mon Sep 17 00:00:00 2001 From: Preeti U Murthy Date: Wed, 2 Jul 2014 09:19:35 +0530 Subject: powerpc/powernv: Check for IRQHAPPENED before sleeping Commit 8d6f7c5a: "powerpc/powernv: Make it possible to skip the IRQHAPPENED check in power7_nap()" added code that prevents cpus from checking for pending interrupts just before entering sleep state, which is wrong. These interrupts are delivered during the soft irq disabled state of the cpu. A cpu cannot enter any idle state with pending interrupts because they will never be serviced until the next time the cpu is woken up by some other interrupt. Its only then that the pending interrupts are replayed. This can result in device timeouts or warnings about this cpu being stuck. This patch fixes ths issue by ensuring that cpus check for pending interrupts just before entering any idle state as long as they are not in the path of split core operations. Signed-off-by: Preeti U Murthy Acked-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/idle_power7.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S index 2480256272d4..5cf3d367190d 100644 --- a/arch/powerpc/kernel/idle_power7.S +++ b/arch/powerpc/kernel/idle_power7.S @@ -131,7 +131,7 @@ _GLOBAL(power7_nap) _GLOBAL(power7_sleep) li r3,1 - li r4,0 + li r4,1 b power7_powersave_common /* No return */ -- cgit v1.2.3 From f73128f4f680e8be68cda831f2710214559583cb Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Tue, 8 Jul 2014 16:08:20 +0930 Subject: powerpc/kvm: Remove redundant save of SIER AND MMCR2 These two registers are already saved in the block above. Aside from being unnecessary, by the time we get down to the second save location r8 no longer contains MMCR2, so we are clobbering the saved value with PMC5. MMCR2 primarily consists of counter freeze bits. So restoring the value of PMC5 into MMCR2 will most likely have the effect of freezing counters. Fixes: 72cde5a88d37 ("KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8") Cc: stable@vger.kernel.org Signed-off-by: Joel Stanley Acked-by: Michael Ellerman Acked-by: Paul Mackerras Reviewed-by: Alexander Graf Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kvm/book3s_hv_interrupts.S | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/powerpc/kvm/book3s_hv_interrupts.S b/arch/powerpc/kvm/book3s_hv_interrupts.S index 8c86422a1e37..731be7478b27 100644 --- a/arch/powerpc/kvm/book3s_hv_interrupts.S +++ b/arch/powerpc/kvm/book3s_hv_interrupts.S @@ -127,11 +127,6 @@ BEGIN_FTR_SECTION stw r10, HSTATE_PMC + 24(r13) stw r11, HSTATE_PMC + 28(r13) END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201) -BEGIN_FTR_SECTION - mfspr r9, SPRN_SIER - std r8, HSTATE_MMCR + 40(r13) - std r9, HSTATE_MMCR + 48(r13) -END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) 31: /* -- cgit v1.2.3 From 4d9690dd56b0d18f2af8a9d4a279cb205aae3345 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Tue, 8 Jul 2014 16:08:21 +0930 Subject: powerpc/perf: Add PPMU_ARCH_207S define Instead of separate bits for every POWER8 PMU feature, have a single one for v2.07 of the architecture. This saves us adding a MMCR2 define for a future patch. Cc: stable@vger.kernel.org Signed-off-by: Joel Stanley Acked-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/perf_event_server.h | 3 +-- arch/powerpc/perf/core-book3s.c | 6 +++--- arch/powerpc/perf/power8-pmu.c | 2 +- 3 files changed, 5 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h index 9ed737146dbb..b3e936027b26 100644 --- a/arch/powerpc/include/asm/perf_event_server.h +++ b/arch/powerpc/include/asm/perf_event_server.h @@ -61,8 +61,7 @@ struct power_pmu { #define PPMU_SIAR_VALID 0x00000010 /* Processor has SIAR Valid bit */ #define PPMU_HAS_SSLOT 0x00000020 /* Has sampled slot in MMCRA */ #define PPMU_HAS_SIER 0x00000040 /* Has SIER */ -#define PPMU_BHRB 0x00000080 /* has BHRB feature enabled */ -#define PPMU_EBB 0x00000100 /* supports event based branch */ +#define PPMU_ARCH_207S 0x00000080 /* PMC is architecture v2.07S */ /* * Values for flags to get_alternatives() diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 4520c9356b54..a2ff1bda706a 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -485,7 +485,7 @@ static bool is_ebb_event(struct perf_event *event) * check that the PMU supports EBB, meaning those that don't can still * use bit 63 of the event code for something else if they wish. */ - return (ppmu->flags & PPMU_EBB) && + return (ppmu->flags & PPMU_ARCH_207S) && ((event->attr.config >> PERF_EVENT_CONFIG_EBB_SHIFT) & 1); } @@ -777,7 +777,7 @@ void perf_event_print_debug(void) if (ppmu->flags & PPMU_HAS_SIER) sier = mfspr(SPRN_SIER); - if (ppmu->flags & PPMU_EBB) { + if (ppmu->flags & PPMU_ARCH_207S) { pr_info("MMCR2: %016lx EBBHR: %016lx\n", mfspr(SPRN_MMCR2), mfspr(SPRN_EBBHR)); pr_info("EBBRR: %016lx BESCR: %016lx\n", @@ -1696,7 +1696,7 @@ static int power_pmu_event_init(struct perf_event *event) if (has_branch_stack(event)) { /* PMU has BHRB enabled */ - if (!(ppmu->flags & PPMU_BHRB)) + if (!(ppmu->flags & PPMU_ARCH_207S)) return -EOPNOTSUPP; } diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c index fe2763b6e039..639cd9156585 100644 --- a/arch/powerpc/perf/power8-pmu.c +++ b/arch/powerpc/perf/power8-pmu.c @@ -792,7 +792,7 @@ static struct power_pmu power8_pmu = { .get_constraint = power8_get_constraint, .get_alternatives = power8_get_alternatives, .disable_pmc = power8_disable_pmc, - .flags = PPMU_HAS_SSLOT | PPMU_HAS_SIER | PPMU_BHRB | PPMU_EBB, + .flags = PPMU_HAS_SSLOT | PPMU_HAS_SIER | PPMU_ARCH_207S, .n_generic = ARRAY_SIZE(power8_generic_events), .generic_events = power8_generic_events, .cache_events = &power8_cache_events, -- cgit v1.2.3 From b50a6c584bb47b370f84bfd746770c0bbe7129b7 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Tue, 8 Jul 2014 16:08:22 +0930 Subject: powerpc/perf: Clear MMCR2 when enabling PMU On POWER8 when switching to a KVM guest we set bits in MMCR2 to freeze the PMU counters. Aside from on boot they are then never reset, resulting in stuck perf counters for any user in the guest or host. We now set MMCR2 to 0 whenever enabling the PMU, which provides a sane state for perf to use the PMU counters under either the guest or the host. This was manifesting as a bug with ppc64_cpu --frequency: $ sudo ppc64_cpu --frequency WARNING: couldn't run on cpu 0 WARNING: couldn't run on cpu 8 ... WARNING: couldn't run on cpu 144 WARNING: couldn't run on cpu 152 min: 18446744073.710 GHz (cpu -1) max: 0.000 GHz (cpu -1) avg: 0.000 GHz The command uses a perf counter to measure CPU cycles over a fixed amount of time, in order to approximate the frequency of the machine. The counters were returning zero once a guest was started, regardless of weather it was still running or had been shut down. By dumping the value of MMCR2, it was observed that once a guest is running MMCR2 is set to 1s - which stops counters from running: $ sudo sh -c 'echo p > /proc/sysrq-trigger' CPU: 0 PMU registers, ppmu = POWER8 n_counters = 6 PMC1: 5b635e38 PMC2: 00000000 PMC3: 00000000 PMC4: 00000000 PMC5: 1bf5a646 PMC6: 5793d378 PMC7: deadbeef PMC8: deadbeef MMCR0: 0000000080000000 MMCR1: 000000001e000000 MMCRA: 0000040000000000 MMCR2: fffffffffffffc00 EBBHR: 0000000000000000 EBBRR: 0000000000000000 BESCR: 0000000000000000 SIAR: 00000000000a51cc SDAR: c00000000fc40000 SIER: 0000000001000000 This is done unconditionally in book3s_hv_interrupts.S upon entering the guest, and the original value is only save/restored if the host has indicated it was using the PMU. This is okay, however the user of the PMU needs to ensure that it is in a defined state when it starts using it. Fixes: e05b9b9e5c10 ("powerpc/perf: Power8 PMU support") Cc: stable@vger.kernel.org Signed-off-by: Joel Stanley Acked-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/core-book3s.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index a2ff1bda706a..bae697cd5925 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1300,6 +1300,9 @@ static void power_pmu_enable(struct pmu *pmu) write_mmcr0(cpuhw, mmcr0); + if (ppmu->flags & PPMU_ARCH_207S) + mtspr(SPRN_MMCR2, 0); + /* * Enable instruction sampling if necessary */ -- cgit v1.2.3 From fb43e8477ed9006c4f397f904c691a120503038c Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 30 Jun 2014 11:45:30 -0700 Subject: powerpc: Disable RELOCATABLE for COMPILE_TEST with PPC64 powerpc:allmodconfig has been failing for some time with the following error. arch/powerpc/kernel/exceptions-64s.S: Assembler messages: arch/powerpc/kernel/exceptions-64s.S:1312: Error: attempt to move .org backwards make[1]: *** [arch/powerpc/kernel/head_64.o] Error 1 A number of attempts to fix the problem by moving around code have been unsuccessful and resulted in failed builds for some configurations and the discovery of toolchain bugs. Fix the problem by disabling RELOCATABLE for COMPILE_TEST builds instead. While this is less than perfect, it avoids substantial code changes which would otherwise be necessary just to make COMPILE_TEST builds happy and might have undesired side effects. Signed-off-by: Guenter Roeck Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index bd6dd6ed3a9f..fefe7c8bf05f 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -414,7 +414,7 @@ config KEXEC config CRASH_DUMP bool "Build a kdump crash kernel" depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP) - select RELOCATABLE if PPC64 || 44x || FSL_BOOKE + select RELOCATABLE if (PPC64 && !COMPILE_TEST) || 44x || FSL_BOOKE help Build a kernel suitable for use as a kdump capture kernel. The same kernel binary can be used as production kernel and dump @@ -1017,6 +1017,7 @@ endmenu if PPC64 config RELOCATABLE bool "Build a relocatable kernel" + depends on !COMPILE_TEST select NONSTATIC_KERNEL help This builds a kernel image that is capable of running anywhere -- cgit v1.2.3 From f56029410a13cae3652d1f34788045c40a13ffc7 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 29 May 2014 08:15:38 +1000 Subject: powerpc/perf: Never program book3s PMCs with values >= 0x80000000 We are seeing a lot of PMU warnings on POWER8: Can't find PMC that caused IRQ Looking closer, the active PMC is 0 at this point and we took a PMU exception on the transition from negative to 0. Some versions of POWER8 have an issue where they edge detect and not level detect PMC overflows. A number of places program the PMC with (0x80000000 - period_left), where period_left can be negative. We can either fix all of these or just ensure that period_left is always >= 1. This patch takes the second option. Cc: Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/core-book3s.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index bae697cd5925..6b0641c3f03f 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -996,7 +996,22 @@ static void power_pmu_read(struct perf_event *event) } while (local64_cmpxchg(&event->hw.prev_count, prev, val) != prev); local64_add(delta, &event->count); - local64_sub(delta, &event->hw.period_left); + + /* + * A number of places program the PMC with (0x80000000 - period_left). + * We never want period_left to be less than 1 because we will program + * the PMC with a value >= 0x800000000 and an edge detected PMC will + * roll around to 0 before taking an exception. We have seen this + * on POWER8. + * + * To fix this, clamp the minimum value of period_left to 1. + */ + do { + prev = local64_read(&event->hw.period_left); + val = prev - delta; + if (val < 1) + val = 1; + } while (local64_cmpxchg(&event->hw.period_left, prev, val) != prev); } /* -- cgit v1.2.3 From 5bc8c7cdeb6e3d9c1b938b4029d9a22f8dc5cd9d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 10 Jul 2014 18:03:17 +0200 Subject: m68k: Export mach_random_get_entropy to modules When a module calls random_get_entropy(): ERROR: "mach_random_get_entropy" [crypto/drbg.ko] undefined! make[1]: *** [__modpost] Error 1 Signed-off-by: Geert Uytterhoeven --- arch/m68k/kernel/time.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c index 958f1adb9d0c..3857737e3958 100644 --- a/arch/m68k/kernel/time.c +++ b/arch/m68k/kernel/time.c @@ -11,6 +11,7 @@ */ #include +#include #include #include #include @@ -30,6 +31,7 @@ unsigned long (*mach_random_get_entropy)(void); +EXPORT_SYMBOL_GPL(mach_random_get_entropy); /* -- cgit v1.2.3 From f9ae9cf5d72b3926ca48ea60e15bdbb840f42372 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 11 Jul 2014 13:55:40 -0400 Subject: ext4: revert commit which was causing fs corruption after journal replays Commit 007649375f6af2 ("ext4: initialize multi-block allocator before checking block descriptors") causes the block group descriptor's count of the number of free blocks to become inconsistent with the number of free blocks in the allocation bitmap. This is a harmless form of fs corruption, but it causes the kernel to potentially remount the file system read-only, or to panic, depending on the file systems's error behavior. Thanks to Eric Whitney for his tireless work to reproduce and to find the guilty commit. Fixes: 007649375f6af2 ("ext4: initialize multi-block allocator before checking block descriptors" Cc: stable@vger.kernel.org # 3.15 Reported-by: David Jander Reported-by: Matteo Croce Tested-by: Eric Whitney Suggested-by: Eric Whitney Signed-off-by: Theodore Ts'o --- fs/ext4/super.c | 51 ++++++++++++++++++++++++--------------------------- 1 file changed, 24 insertions(+), 27 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 6297c07c937f..6df7bc611dbd 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3879,38 +3879,19 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) goto failed_mount2; } } - - /* - * set up enough so that it can read an inode, - * and create new inode for buddy allocator - */ - sbi->s_gdb_count = db_count; - if (!test_opt(sb, NOLOAD) && - EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL)) - sb->s_op = &ext4_sops; - else - sb->s_op = &ext4_nojournal_sops; - - ext4_ext_init(sb); - err = ext4_mb_init(sb); - if (err) { - ext4_msg(sb, KERN_ERR, "failed to initialize mballoc (%d)", - err); - goto failed_mount2; - } - if (!ext4_check_descriptors(sb, &first_not_zeroed)) { ext4_msg(sb, KERN_ERR, "group descriptors corrupted!"); - goto failed_mount2a; + goto failed_mount2; } if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG)) if (!ext4_fill_flex_info(sb)) { ext4_msg(sb, KERN_ERR, "unable to initialize " "flex_bg meta info!"); - goto failed_mount2a; + goto failed_mount2; } + sbi->s_gdb_count = db_count; get_random_bytes(&sbi->s_next_generation, sizeof(u32)); spin_lock_init(&sbi->s_next_gen_lock); @@ -3945,6 +3926,14 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) sbi->s_stripe = ext4_get_stripe_size(sbi); sbi->s_extent_max_zeroout_kb = 32; + /* + * set up enough so that it can read an inode + */ + if (!test_opt(sb, NOLOAD) && + EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL)) + sb->s_op = &ext4_sops; + else + sb->s_op = &ext4_nojournal_sops; sb->s_export_op = &ext4_export_ops; sb->s_xattr = ext4_xattr_handlers; #ifdef CONFIG_QUOTA @@ -4134,13 +4123,21 @@ no_journal: if (err) { ext4_msg(sb, KERN_ERR, "failed to reserve %llu clusters for " "reserved pool", ext4_calculate_resv_clusters(sb)); - goto failed_mount5; + goto failed_mount4a; } err = ext4_setup_system_zone(sb); if (err) { ext4_msg(sb, KERN_ERR, "failed to initialize system " "zone (%d)", err); + goto failed_mount4a; + } + + ext4_ext_init(sb); + err = ext4_mb_init(sb); + if (err) { + ext4_msg(sb, KERN_ERR, "failed to initialize mballoc (%d)", + err); goto failed_mount5; } @@ -4217,8 +4214,11 @@ failed_mount8: failed_mount7: ext4_unregister_li_request(sb); failed_mount6: - ext4_release_system_zone(sb); + ext4_mb_release(sb); failed_mount5: + ext4_ext_release(sb); + ext4_release_system_zone(sb); +failed_mount4a: dput(sb->s_root); sb->s_root = NULL; failed_mount4: @@ -4242,14 +4242,11 @@ failed_mount3: percpu_counter_destroy(&sbi->s_extent_cache_cnt); if (sbi->s_mmp_tsk) kthread_stop(sbi->s_mmp_tsk); -failed_mount2a: - ext4_mb_release(sb); failed_mount2: for (i = 0; i < db_count; i++) brelse(sbi->s_group_desc[i]); ext4_kvfree(sbi->s_group_desc); failed_mount: - ext4_ext_release(sb); if (sbi->s_chksum_driver) crypto_free_shash(sbi->s_chksum_driver); if (sbi->s_proc) { -- cgit v1.2.3 From 78b3321610bf920d7fceb1a0236faa881be0bcf3 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Thu, 7 Aug 2014 22:03:00 +0100 Subject: iio:core: Handle error when mask type is not separate When event spec is shared by multiple channels, which has definition for mask_shared_by_type, iio_device_register_eventset fails. For example: static const struct iio_event_spec iio_dummy_events[] = { { .type = IIO_EV_TYPE_THRESH, .dir = IIO_EV_DIR_RISING, .mask_separate = BIT(IIO_EV_INFO_ENABLE), .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE), }, { .type = IIO_EV_TYPE_THRESH, .dir = IIO_EV_DIR_FALLING, .mask_separate = BIT(IIO_EV_INFO_ENABLE),a .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE), } }; If two channels use this event spec, this will result in error. This change handles EBUSY error similar to iio_device_add_info_mask_type(). Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron Cc: Stable@vger.kernel.org --- drivers/iio/industrialio-event.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c index 258a973a1fb8..bfbf4d419f41 100644 --- a/drivers/iio/industrialio-event.c +++ b/drivers/iio/industrialio-event.c @@ -345,6 +345,9 @@ static int iio_device_add_event(struct iio_dev *indio_dev, &indio_dev->event_interface->dev_attr_list); kfree(postfix); + if ((ret == -EBUSY) && (shared_by != IIO_SEPARATE)) + continue; + if (ret) return ret; -- cgit v1.2.3 From 19eeb2f9e750f47c805f66e3b0e889b12557d80f Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Thu, 10 Jul 2014 18:43:01 -0400 Subject: farsync: fix invalid memory accesses in fst_add_one() and fst_init_card() There are several issues in fst_add_one() and fst_init_card(): - invalid pointer dereference at card->ports[card->nports - 1] if register_hdlc_device() fails for the first port in fst_init_card(); - fst_card_array overflow at fst_card_array[no_of_cards_added] because there is no checks for array overflow; - use after free because pointer to deallocated card is left in fst_card_array if something fails after fst_card_array[no_of_cards_added] = card; - several leaks on failure paths in fst_add_one(). The patch fixes all the issues and makes code more readable. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: David S. Miller --- drivers/net/wan/farsync.c | 112 ++++++++++++++++++++++++---------------------- 1 file changed, 58 insertions(+), 54 deletions(-) diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index 93ace042d0aa..1f041271f7fe 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -2363,7 +2363,7 @@ static char *type_strings[] = { "FarSync TE1" }; -static void +static int fst_init_card(struct fst_card_info *card) { int i; @@ -2374,24 +2374,21 @@ fst_init_card(struct fst_card_info *card) * we'll have to revise it in some way then. */ for (i = 0; i < card->nports; i++) { - err = register_hdlc_device(card->ports[i].dev); - if (err < 0) { - int j; + err = register_hdlc_device(card->ports[i].dev); + if (err < 0) { pr_err("Cannot register HDLC device for port %d (errno %d)\n", - i, -err); - for (j = i; j < card->nports; j++) { - free_netdev(card->ports[j].dev); - card->ports[j].dev = NULL; - } - card->nports = i; - break; - } + i, -err); + while (i--) + unregister_hdlc_device(card->ports[i].dev); + return err; + } } pr_info("%s-%s: %s IRQ%d, %d ports\n", port_to_dev(&card->ports[0])->name, port_to_dev(&card->ports[card->nports - 1])->name, type_strings[card->type], card->irq, card->nports); + return 0; } static const struct net_device_ops fst_ops = { @@ -2447,15 +2444,12 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* Try to enable the device */ if ((err = pci_enable_device(pdev)) != 0) { pr_err("Failed to enable card. Err %d\n", -err); - kfree(card); - return err; + goto enable_fail; } if ((err = pci_request_regions(pdev, "FarSync")) !=0) { pr_err("Failed to allocate regions. Err %d\n", -err); - pci_disable_device(pdev); - kfree(card); - return err; + goto regions_fail; } /* Get virtual addresses of memory regions */ @@ -2464,30 +2458,21 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent) card->phys_ctlmem = pci_resource_start(pdev, 3); if ((card->mem = ioremap(card->phys_mem, FST_MEMSIZE)) == NULL) { pr_err("Physical memory remap failed\n"); - pci_release_regions(pdev); - pci_disable_device(pdev); - kfree(card); - return -ENODEV; + err = -ENODEV; + goto ioremap_physmem_fail; } if ((card->ctlmem = ioremap(card->phys_ctlmem, 0x10)) == NULL) { pr_err("Control memory remap failed\n"); - pci_release_regions(pdev); - pci_disable_device(pdev); - iounmap(card->mem); - kfree(card); - return -ENODEV; + err = -ENODEV; + goto ioremap_ctlmem_fail; } dbg(DBG_PCI, "kernel mem %p, ctlmem %p\n", card->mem, card->ctlmem); /* Register the interrupt handler */ if (request_irq(pdev->irq, fst_intr, IRQF_SHARED, FST_DEV_NAME, card)) { pr_err("Unable to register interrupt %d\n", card->irq); - pci_release_regions(pdev); - pci_disable_device(pdev); - iounmap(card->ctlmem); - iounmap(card->mem); - kfree(card); - return -ENODEV; + err = -ENODEV; + goto irq_fail; } /* Record info we need */ @@ -2513,13 +2498,8 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent) while (i--) free_netdev(card->ports[i].dev); pr_err("FarSync: out of memory\n"); - free_irq(card->irq, card); - pci_release_regions(pdev); - pci_disable_device(pdev); - iounmap(card->ctlmem); - iounmap(card->mem); - kfree(card); - return -ENODEV; + err = -ENOMEM; + goto hdlcdev_fail; } card->ports[i].dev = dev; card->ports[i].card = card; @@ -2565,9 +2545,16 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_drvdata(pdev, card); /* Remainder of card setup */ + if (no_of_cards_added >= FST_MAX_CARDS) { + pr_err("FarSync: too many cards\n"); + err = -ENOMEM; + goto card_array_fail; + } fst_card_array[no_of_cards_added] = card; card->card_no = no_of_cards_added++; /* Record instance and bump it */ - fst_init_card(card); + err = fst_init_card(card); + if (err) + goto init_card_fail; if (card->family == FST_FAMILY_TXU) { /* * Allocate a dma buffer for transmit and receives @@ -2577,29 +2564,46 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent) &card->rx_dma_handle_card); if (card->rx_dma_handle_host == NULL) { pr_err("Could not allocate rx dma buffer\n"); - fst_disable_intr(card); - pci_release_regions(pdev); - pci_disable_device(pdev); - iounmap(card->ctlmem); - iounmap(card->mem); - kfree(card); - return -ENOMEM; + err = -ENOMEM; + goto rx_dma_fail; } card->tx_dma_handle_host = pci_alloc_consistent(card->device, FST_MAX_MTU, &card->tx_dma_handle_card); if (card->tx_dma_handle_host == NULL) { pr_err("Could not allocate tx dma buffer\n"); - fst_disable_intr(card); - pci_release_regions(pdev); - pci_disable_device(pdev); - iounmap(card->ctlmem); - iounmap(card->mem); - kfree(card); - return -ENOMEM; + err = -ENOMEM; + goto tx_dma_fail; } } return 0; /* Success */ + +tx_dma_fail: + pci_free_consistent(card->device, FST_MAX_MTU, + card->rx_dma_handle_host, + card->rx_dma_handle_card); +rx_dma_fail: + fst_disable_intr(card); + for (i = 0 ; i < card->nports ; i++) + unregister_hdlc_device(card->ports[i].dev); +init_card_fail: + fst_card_array[card->card_no] = NULL; +card_array_fail: + for (i = 0 ; i < card->nports ; i++) + free_netdev(card->ports[i].dev); +hdlcdev_fail: + free_irq(card->irq, card); +irq_fail: + iounmap(card->ctlmem); +ioremap_ctlmem_fail: + iounmap(card->mem); +ioremap_physmem_fail: + pci_release_regions(pdev); +regions_fail: + pci_disable_device(pdev); +enable_fail: + kfree(card); + return err; } /* -- cgit v1.2.3 From d0a7ebbc119738439ff00f7fadbd343ae20ea5e8 Mon Sep 17 00:00:00 2001 From: Amritha Nambiar Date: Thu, 10 Jul 2014 17:29:21 -0700 Subject: GRE: enable offloads for GRE To get offloads to work with Generic Routing Encapsulation (GRE), the outer transport header has to be reset after skb_push is done. This patch has the support for this fix and hence GRE offloading. Signed-off-by: Amritha Nambiar Signed-off-by: Joseph Gasparakis Tested-By: Jim Young Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- net/ipv4/gre_demux.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/gre_demux.c b/net/ipv4/gre_demux.c index 4e9619bca732..0485bf7f8f03 100644 --- a/net/ipv4/gre_demux.c +++ b/net/ipv4/gre_demux.c @@ -68,6 +68,7 @@ void gre_build_header(struct sk_buff *skb, const struct tnl_ptk_info *tpi, skb_push(skb, hdr_len); + skb_reset_transport_header(skb); greh = (struct gre_base_hdr *)skb->data; greh->flags = tnl_flags_to_gre_flags(tpi->flags); greh->protocol = tpi->proto; -- cgit v1.2.3 From 4cad9f3b61c7268fa89ab8096e23202300399b5d Mon Sep 17 00:00:00 2001 From: Suresh Reddy Date: Fri, 11 Jul 2014 14:03:01 +0530 Subject: be2net: set EQ DB clear-intr bit in be_open() On BE3, if the clear-interrupt bit of the EQ doorbell is not set the first time it is armed, ocassionally we have observed that the EQ doesn't raise anymore interrupts even if it is in armed state. This patch fixes this by setting the clear-interrupt bit when EQs are armed for the first time in be_open(). Signed-off-by: Suresh Reddy Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 34a26e42f19d..1e187fb760f8 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2902,7 +2902,7 @@ static int be_open(struct net_device *netdev) for_all_evt_queues(adapter, eqo, i) { napi_enable(&eqo->napi); be_enable_busy_poll(eqo); - be_eq_notify(adapter, eqo->q.id, true, false, 0); + be_eq_notify(adapter, eqo->q.id, true, true, 0); } adapter->flags |= BE_FLAGS_NAPI_ENABLED; -- cgit v1.2.3 From a91d45f1a343188793d6f2bdf1a72c64015a8255 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Fri, 11 Jul 2014 16:48:27 +0800 Subject: r8152: fix r8152_csum_workaround function The transport offset of the IPv4 packet should be fixed and wouldn't be out of the hw limitation, so the r8152_csum_workaround() should be used for IPv6 packets. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index a795ecf8d5b6..7bad2d316637 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -1359,7 +1359,7 @@ static void r8152_csum_workaround(struct r8152 *tp, struct sk_buff *skb, struct sk_buff_head seg_list; struct sk_buff *segs, *nskb; - features &= ~(NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO); + features &= ~(NETIF_F_SG | NETIF_F_IPV6_CSUM | NETIF_F_TSO6); segs = skb_gso_segment(skb, features); if (IS_ERR(segs) || !segs) goto drop; -- cgit v1.2.3 From 999417549c16dd0e3a382aa9f6ae61688db03181 Mon Sep 17 00:00:00 2001 From: Jon Paul Maloy Date: Fri, 11 Jul 2014 08:45:27 -0400 Subject: tipc: clear 'next'-pointer of message fragments before reassembly If the 'next' pointer of the last fragment buffer in a message is not zeroed before reassembly, we risk ending up with a corrupt message, since the reassembly function itself isn't doing this. Currently, when a buffer is retrieved from the deferred queue of the broadcast link, the next pointer is not cleared, with the result as described above. This commit corrects this, and thereby fixes a bug that may occur when long broadcast messages are transmitted across dual interfaces. The bug has been present since 40ba3cdf542a469aaa9083fa041656e59b109b90 ("tipc: message reassembly using fragment chain") This commit should be applied to both net and net-next. Signed-off-by: Jon Maloy Signed-off-by: David S. Miller --- net/tipc/bcast.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/tipc/bcast.c b/net/tipc/bcast.c index 26631679a1fa..55c6c9d3e1ce 100644 --- a/net/tipc/bcast.c +++ b/net/tipc/bcast.c @@ -559,6 +559,7 @@ receive: buf = node->bclink.deferred_head; node->bclink.deferred_head = buf->next; + buf->next = NULL; node->bclink.deferred_size--; goto receive; } -- cgit v1.2.3 From 1d9dbf154295aa33819b08340464ff15495e83d8 Mon Sep 17 00:00:00 2001 From: Darren Hart Date: Fri, 11 Jul 2014 11:03:39 +0000 Subject: ACPI / documentation: Remove reference to acpi_platform_device_ids from enumeration.txt As of: 4845934 ACPI / scan: use platform bus type by default for _HID enumeration ACPI uses the platform bus by default, changing the opt-in to an opt-out policy, eliminating the acpi_platform_device_ids table and replacing it with forbidden_id_list[]. Remove the qualifying paragraph from the acpi/enumeration documentation as it no longer applies. Reported-by: Max Eliaser Signed-off-by: Darren Hart Signed-off-by: Rafael J. Wysocki --- Documentation/acpi/enumeration.txt | 6 ------ 1 file changed, 6 deletions(-) diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt index fd786ea13a1f..e182be5e3c83 100644 --- a/Documentation/acpi/enumeration.txt +++ b/Documentation/acpi/enumeration.txt @@ -60,12 +60,6 @@ If the driver needs to perform more complex initialization like getting and configuring GPIOs it can get its ACPI handle and extract this information from ACPI tables. -Currently the kernel is not able to automatically determine from which ACPI -device it should make the corresponding platform device so we need to add -the ACPI device explicitly to acpi_platform_device_ids list defined in -drivers/acpi/acpi_platform.c. This limitation is only for the platform -devices, SPI and I2C devices are created automatically as described below. - DMA support ~~~~~~~~~~~ DMA controllers enumerated via ACPI should be registered in the system to -- cgit v1.2.3 From 8bec751bd63847b4044aab8b215db52aa6abde61 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Thu, 10 Jul 2014 22:36:46 -0400 Subject: serial: imx: Fix build breakage Fix breakage introduced by commit c557d392fbf5badd693ea1946a4317c87a26a716, 'serial: Test for no tx data on tx restart'. Reported-by: Stephen Rothwell Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 56bd9aa56151..044e86d528ae 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -567,7 +567,7 @@ static void imx_start_tx(struct uart_port *port) struct imx_port *sport = (struct imx_port *)port; unsigned long temp; - if (uart_circ_empty(&port.state->xmit)) + if (uart_circ_empty(&port->state->xmit)) return; if (USE_IRDA(sport)) { -- cgit v1.2.3 From 34c4eda809e1efb16c554c07bb5df4c8ace9424e Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 11 Jul 2014 11:11:08 +0200 Subject: serial: sh-sci: Add device tree support for r8a7{778,740,3a4} and sh73a0 Simply document new compat strings. There appears to be no need for a driver updates. Signed-off-by: Simon Horman Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/serial/renesas,sci-serial.txt | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 64fd7dec1bbc..b3556609a06f 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -4,6 +4,13 @@ Required properties: - compatible: Must contain one of the following: + - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. + - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART. + - "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART. + - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART. + - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART. + - "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART. + - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART. - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART. -- cgit v1.2.3 From aff008ad813c7cf3cfe7b532e7ba2c526c136f22 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 17 Jun 2014 15:51:02 -0700 Subject: platform_get_irq: Revert to platform_get_resource if of_irq_get fails Commits 9ec36ca (of/irq: do irq resolution in platform_get_irq) and ad69674 (of/irq: do irq resolution in platform_get_irq_byname) change the semantics of platform_get_irq and platform_get_irq_byname to always rely on devicetree information if devicetree is enabled and if a devicetree node is attached to the device. The functions now return an error if the devicetree data does not include interrupt information, even if the information is available as platform resource data. This causes mfd client drivers to fail if the interrupt number is passed via platform resources. Therefore, if of_irq_get fails, try platform_get_resource as method of last resort. This restores the original functionality for drivers depending on platform resources to get irq information. Cc: Russell King Cc: Tony Lindgren Cc: Grant Likely Cc: Grygorii Strashko Signed-off-by: Guenter Roeck Acked-by: Rob Herring Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/base/platform.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 9e9227e1762d..eee48c49f5de 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -89,8 +89,13 @@ int platform_get_irq(struct platform_device *dev, unsigned int num) return dev->archdata.irqs[num]; #else struct resource *r; - if (IS_ENABLED(CONFIG_OF_IRQ) && dev->dev.of_node) - return of_irq_get(dev->dev.of_node, num); + if (IS_ENABLED(CONFIG_OF_IRQ) && dev->dev.of_node) { + int ret; + + ret = of_irq_get(dev->dev.of_node, num); + if (ret >= 0 || ret == -EPROBE_DEFER) + return ret; + } r = platform_get_resource(dev, IORESOURCE_IRQ, num); @@ -133,8 +138,13 @@ int platform_get_irq_byname(struct platform_device *dev, const char *name) { struct resource *r; - if (IS_ENABLED(CONFIG_OF_IRQ) && dev->dev.of_node) - return of_irq_get_byname(dev->dev.of_node, name); + if (IS_ENABLED(CONFIG_OF_IRQ) && dev->dev.of_node) { + int ret; + + ret = of_irq_get_byname(dev->dev.of_node, name); + if (ret >= 0 || ret == -EPROBE_DEFER) + return ret; + } r = platform_get_resource_byname(dev, IORESOURCE_IRQ, name); return r ? r->start : -ENXIO; -- cgit v1.2.3 From d8279a40e50ad55539780aa617a32a53d7f0953e Mon Sep 17 00:00:00 2001 From: Michal Sojka Date: Thu, 10 Jul 2014 14:00:34 +0200 Subject: USB: serial: ftdi_sio: Add Infineon Triboard This adds support for Infineon TriBoard TC1798 [1]. Only interface 1 is used as serial line (see [2], Figure 8-6). [1] http://www.infineon.com/cms/de/product/microcontroller/development-tools-software-and-kits/tricore-tm-development-tools-software-and-kits/starterkits-and-evaluation-boards/starter-kit-tc1798/channel.html?channel=db3a304333b8a7ca0133cfa3d73e4268 [2] http://www.infineon.com/dgdl/TriBoardManual-TC1798-V10.pdf?folderId=db3a304412b407950112b409ae7c0343&fileId=db3a304333b8a7ca0133cfae99fe426a Signed-off-by: Michal Sojka Cc: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index bf2e30a6824a..8a3813be1b28 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -945,6 +945,8 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_2_PID) }, { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_3_PID) }, { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_4_PID) }, + /* Infineon Devices */ + { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 106cc16cc6ed..c4777bc6aee0 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -583,6 +583,12 @@ #define RATOC_VENDOR_ID 0x0584 #define RATOC_PRODUCT_ID_USB60F 0xb020 +/* + * Infineon Technologies + */ +#define INFINEON_VID 0x058b +#define INFINEON_TRIBOARD_PID 0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */ + /* * Acton Research Corp. */ -- cgit v1.2.3 From 9820ccba4b1e9c0cdacf254a7be8616357086ebc Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 10 Jul 2014 11:54:59 +0530 Subject: phy: sun4i: depend on RESET_CONTROLLER The driver depend on the reset framework in a mandatory way. Make sure reset_control_get is defined by adding this dependency in Kconfig Signed-off-by: Maxime Ripard Reported-by: Arnd Bergmann Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/phy/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 16a2f067c242..1d8099a56a91 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -112,6 +112,7 @@ config PHY_EXYNOS5250_SATA config PHY_SUN4I_USB tristate "Allwinner sunxi SoC USB PHY driver" depends on ARCH_SUNXI && HAS_IOMEM && OF + depends on RESET_CONTROLLER select GENERIC_PHY help Enable this to support the transceiver that is part of Allwinner -- cgit v1.2.3 From 3df9fcd59fd829da046ca63518ad8e51482a39e0 Mon Sep 17 00:00:00 2001 From: Himangi Saraogi Date: Thu, 10 Jul 2014 11:55:00 +0530 Subject: phy: omap-usb2: fix devm_ioremap_resource error detection code devm_ioremap_resource returns an ERR_PTR value, not NULL, on failure. A simplified version of the semantic match that finds this problem is as follows: // @@ expression e,e1; statement S; @@ *e = devm_ioremap_resource(...); if (!e1) S // Signed-off-by: Himangi Saraogi Acked-by: Julia Lawall Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/phy/phy-omap-usb2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index 7007c11fe07d..2063d542b4e4 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -233,8 +233,8 @@ static int omap_usb2_probe(struct platform_device *pdev) if (phy_data->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) { res = platform_get_resource(pdev, IORESOURCE_MEM, 0); phy->phy_base = devm_ioremap_resource(&pdev->dev, res); - if (!phy->phy_base) - return -ENOMEM; + if (IS_ERR(phy->phy_base)) + return PTR_ERR(phy->phy_base); phy->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT; } -- cgit v1.2.3 From bf5baf954a8249ad565862faa98accb19f3ab957 Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Thu, 10 Jul 2014 11:55:01 +0530 Subject: drivers: phy: phy-samsung-usb2.c: Add missing MODULE_DEVICE_TABLE Allow phy-exynos-usb2 to be autoloaded based on devicetree information. Tested on Odroid X2 with its USB subsystem build as modules. Signed-off-by: Sjoerd Simons Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/phy/phy-samsung-usb2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/phy-samsung-usb2.c index 8a8c6bc8709a..1e69a32c221d 100644 --- a/drivers/phy/phy-samsung-usb2.c +++ b/drivers/phy/phy-samsung-usb2.c @@ -107,6 +107,7 @@ static const struct of_device_id samsung_usb2_phy_of_match[] = { #endif { }, }; +MODULE_DEVICE_TABLE(of, samsung_usb2_phy_of_match); static int samsung_usb2_phy_probe(struct platform_device *pdev) { -- cgit v1.2.3 From e73b49f1c4e75c44d62585cc3e5b9c7894b61c32 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 10 Jul 2014 11:55:02 +0530 Subject: phy: core: Fix error path in phy_create() Prevent resources from being freed twice in case device_add() call fails within phy_create(). Also use ida_simple_remove() instead of ida_remove() as we had used ida_simple_get() to allocate the ida. Cc: 3.13+ # 3.13+ Signed-off-by: Roger Quadros Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/phy/phy-core.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index c64a2f3b2d62..49c446530101 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -614,8 +614,9 @@ struct phy *phy_create(struct device *dev, const struct phy_ops *ops, return phy; put_dev: - put_device(&phy->dev); - ida_remove(&phy_ida, phy->id); + put_device(&phy->dev); /* calls phy_release() which frees resources */ + return ERR_PTR(ret); + free_phy: kfree(phy); return ERR_PTR(ret); @@ -799,7 +800,7 @@ static void phy_release(struct device *dev) phy = to_phy(dev); dev_vdbg(dev, "releasing '%s'\n", dev_name(dev)); - ida_remove(&phy_ida, phy->id); + ida_simple_remove(&phy_ida, phy->id); kfree(phy); } -- cgit v1.2.3 From eb82a3d846fab00c4b9ad6bbe5ade4fa5febc0af Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 10 Jul 2014 11:55:03 +0530 Subject: phy: omap-usb2: Balance pm_runtime_enable() on probe failure and remove If probe fails then we need to call pm_runtime_disable() to balance out the previous pm_runtime_enable() call. Else it will cause unbalanced pm_runtime_enable() call in the succeding probe call. This anomaly was observed when the call to devm_phy_create() failed with -EPROBE_DEFER. Balance out the pm_runtime_enable() call in .remove() as well. Signed-off-by: Roger Quadros Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/phy/phy-omap-usb2.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index 2063d542b4e4..34b396146c8a 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -262,7 +262,6 @@ static int omap_usb2_probe(struct platform_device *pdev) otg->phy = &phy->phy; platform_set_drvdata(pdev, phy); - pm_runtime_enable(phy->dev); generic_phy = devm_phy_create(phy->dev, &ops, NULL); if (IS_ERR(generic_phy)) @@ -270,10 +269,13 @@ static int omap_usb2_probe(struct platform_device *pdev) phy_set_drvdata(generic_phy, phy); + pm_runtime_enable(phy->dev); phy_provider = devm_of_phy_provider_register(phy->dev, of_phy_simple_xlate); - if (IS_ERR(phy_provider)) + if (IS_ERR(phy_provider)) { + pm_runtime_disable(phy->dev); return PTR_ERR(phy_provider); + } phy->wkupclk = devm_clk_get(phy->dev, "wkupclk"); if (IS_ERR(phy->wkupclk)) { @@ -317,6 +319,7 @@ static int omap_usb2_remove(struct platform_device *pdev) if (!IS_ERR(phy->optclk)) clk_unprepare(phy->optclk); usb_remove_phy(&phy->phy); + pm_runtime_disable(phy->dev); return 0; } -- cgit v1.2.3 From 71702e6e52c8312f4c6797a9787d0f8b5656156f Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Fri, 7 Nov 2014 13:54:00 +0000 Subject: iio: mma8452: Use correct acceleration units. The userspace interface for acceleration sensors is documented as using m/s^2 units [Documentation/ABI/testing/sysfs-bus-iio] The fullscale raw value for the mma8452 (-2048) corresponds to -2G, -4G or -8G depending on the seleted mode. The scale table was converting to G rather than m/s^2. Change the scaling table to match the documented interface. Signed-off-by: Martin Fuzzey Signed-off-by: Jonathan Cameron Cc: stable@vger.kernel.org --- drivers/iio/accel/mma8452.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index 17aeea170566..2a5fa9a436e5 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -111,8 +111,14 @@ static const int mma8452_samp_freq[8][2] = { {6, 250000}, {1, 560000} }; +/* + * Hardware has fullscale of -2G, -4G, -8G corresponding to raw value -2048 + * The userspace interface uses m/s^2 and we declare micro units + * So scale factor is given by: + * g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665 + */ static const int mma8452_scales[3][2] = { - {0, 977}, {0, 1953}, {0, 3906} + {0, 9577}, {0, 19154}, {0, 38307} }; static ssize_t mma8452_show_samp_freq_avail(struct device *dev, -- cgit v1.2.3 From 363d4ddc17320ad0906778924d40ba5955ccf194 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Fri, 11 Jul 2014 18:34:56 +0200 Subject: ARM: at91: at91sam9x5: add clocks for usb device Add clocks for usb device, or else switch to CCF, the gadget won't work. Reported-by: Jiri Prchal Signed-off-by: Bo Shen Acked-by: Alexandre Belloni Tested-by: Jiri Prchal Signed-off-by: Nicolas Ferre Signed-off-by: Olof Johansson --- arch/arm/boot/dts/at91sam9x5.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index d6133f497207..2ebc42140ea6 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -1045,6 +1045,8 @@ reg = <0x00500000 0x80000 0xf803c000 0x400>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&usb>, <&udphs_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; ep0 { -- cgit v1.2.3 From c8c3f7d621c1dd803e92d4cdd59e2f730be71a2b Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sat, 12 Jul 2014 09:54:52 -0700 Subject: Documentation/Changes: clean up mcelog paragraph The paragraph on mcelog currently describes kernel v2.6.31. In that kernel the mce code (for i386, that is) was in transition. Ever since v2.6.32 the situation is much simpler (eg, mcelog is now needed to process events on almost all x86 machines, i386 and x86-64). Since this "document is designed to provide a list of the minimum levels of software necessary to run the 3.0 kernels" let's just describe that situation. Signed-off-by: Paul Bolle Acked-by: Andi Kleen Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/Changes | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/Documentation/Changes b/Documentation/Changes index 2254db0f00a5..227bec88021e 100644 --- a/Documentation/Changes +++ b/Documentation/Changes @@ -280,12 +280,9 @@ that is possible. mcelog ------ -In Linux 2.6.31+ the i386 kernel needs to run the mcelog utility -as a regular cronjob similar to the x86-64 kernel to process and log -machine check events when CONFIG_X86_NEW_MCE is enabled. Machine check -events are errors reported by the CPU. Processing them is strongly encouraged. -All x86-64 kernels since 2.6.4 require the mcelog utility to -process machine checks. +On x86 kernels the mcelog utility is needed to process and log machine check +events when CONFIG_X86_MCE is enabled. Machine check events are errors reported +by the CPU. Processing them is strongly encouraged. Getting updated software ======================== -- cgit v1.2.3 From cbb4d3e6510b99522719c5ef0cd0482886a324c0 Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Sat, 12 Jul 2014 09:55:03 -0700 Subject: scripts/kernel-doc: handle object-like macros Object-like macros are different than function-like macros: https://gcc.gnu.org/onlinedocs/cpp/Object-like-Macros.html https://gcc.gnu.org/onlinedocs/cpp/Function-like-Macros.html They are not parsed correctly, generating invalid intermediate files (xmls) for cases like: #define BIT_MASK (0xFF << BIT_SHIFT) where "OxFF <<" is considered to be parameter type. When parsing, we can differentiate beween these two types of macros by checking whether there is at least one whitespace b/w "#define" and first opening parenthesis. Signed-off-by: Horia Geanta Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- scripts/kernel-doc | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/scripts/kernel-doc b/scripts/kernel-doc index da058da413e7..16a07cfa4d34 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -2073,6 +2073,7 @@ sub check_return_section { sub dump_function($$) { my $prototype = shift; my $file = shift; + my $noret = 0; $prototype =~ s/^static +//; $prototype =~ s/^extern +//; @@ -2086,7 +2087,7 @@ sub dump_function($$) { $prototype =~ s/__init_or_module +//; $prototype =~ s/__must_check +//; $prototype =~ s/__weak +//; - $prototype =~ s/^#\s*define\s+//; #ak added + my $define = $prototype =~ s/^#\s*define\s+//; #ak added $prototype =~ s/__attribute__\s*\(\([a-z,]*\)\)//; # Yes, this truly is vile. We are looking for: @@ -2105,7 +2106,15 @@ sub dump_function($$) { # - atomic_set (macro) # - pci_match_device, __copy_to_user (long return type) - if ($prototype =~ m/^()([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || + if ($define && $prototype =~ m/^()([a-zA-Z0-9_~:]+)\s+/) { + # This is an object-like macro, it has no return type and no parameter + # list. + # Function-like macros are not allowed to have spaces between + # declaration_name and opening parenthesis (notice the \s+). + $return_type = $1; + $declaration_name = $2; + $noret = 1; + } elsif ($prototype =~ m/^()([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || $prototype =~ m/^(\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || $prototype =~ m/^(\w+\s*\*)\s*([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || $prototype =~ m/^(\w+\s+\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || @@ -2140,7 +2149,7 @@ sub dump_function($$) { # of warnings goes sufficiently down, the check is only performed in # verbose mode. # TODO: always perform the check. - if ($verbose) { + if ($verbose && !$noret) { check_return_section($file, $declaration_name, $return_type); } -- cgit v1.2.3 From 8011b3c96f393b7ae95a6fd80e1634626c1b95ab Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Sat, 12 Jul 2014 09:55:15 -0700 Subject: DocBook: fix mtdnand typos This patch fixed spelling typo found in DocBook/mtdnand.tmpl. Signed-off-by: Masanari Iida Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/DocBook/mtdnand.tmpl | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index cd11926e07c7..7da8f0402af5 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -91,7 +91,7 @@ [MTD Interface] These functions provide the interface to the MTD kernel API. - They are not replacable and provide functionality + They are not replaceable and provide functionality which is complete hardware independent. @@ -100,14 +100,14 @@ [GENERIC] - Generic functions are not replacable and provide functionality + Generic functions are not replaceable and provide functionality which is complete hardware independent. [DEFAULT] Default functions provide hardware related functionality which is suitable for most of the implementations. These functions can be replaced by the - board driver if neccecary. Those functions are called via pointers in the + board driver if necessary. Those functions are called via pointers in the NAND chip description structure. The board driver can set the functions which should be replaced by board dependent functions before calling nand_scan(). If the function pointer is NULL on entry to nand_scan() then the pointer @@ -264,7 +264,7 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd) is set up nand_scan() is called. This function tries to detect and identify then chip. If a chip is found all the internal data fields are initialized accordingly. - The structure(s) have to be zeroed out first and then filled with the neccecary + The structure(s) have to be zeroed out first and then filled with the necessary information about the device. @@ -327,7 +327,7 @@ module_init(board_init); Exit function - The exit function is only neccecary if the driver is + The exit function is only necessary if the driver is compiled as a module. It releases all resources which are held by the chip driver and unregisters the partitions in the MTD layer. @@ -494,7 +494,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) in this case. See rts_from4.c and diskonchip.c for implementation reference. In those cases we must also use bad block tables on FLASH, because the ECC layout is - interferring with the bad block marker positions. + interfering with the bad block marker positions. See bad block table support for details. @@ -542,7 +542,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) nand_scan() calls the function nand_default_bbt(). nand_default_bbt() selects appropriate default - bad block table desriptors depending on the chip information + bad block table descriptors depending on the chip information which was retrieved by nand_scan(). @@ -554,7 +554,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) Flash based tables - It may be desired or neccecary to keep a bad block table in FLASH. + It may be desired or necessary to keep a bad block table in FLASH. For AG-AND chips this is mandatory, as they have no factory marked bad blocks. They have factory marked good blocks. The marker pattern is erased when the block is erased to be reused. So in case of @@ -565,10 +565,10 @@ static void board_select_chip (struct mtd_info *mtd, int chip) of the blocks. - The blocks in which the tables are stored are procteted against + The blocks in which the tables are stored are protected against accidental access by marking them bad in the memory bad block table. The bad block table management functions are allowed - to circumvernt this protection. + to circumvent this protection. The simplest way to activate the FLASH based bad block table support @@ -592,7 +592,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) User defined tables are created by filling out a nand_bbt_descr structure and storing the pointer in the nand_chip structure member bbt_td before calling nand_scan(). - If a mirror table is neccecary a second structure must be + If a mirror table is necessary a second structure must be created and a pointer to this structure must be stored in bbt_md inside the nand_chip structure. If the bbt_md member is set to NULL then only the main table is used @@ -666,7 +666,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) For automatic placement some blocks must be reserved for bad block table storage. The number of reserved blocks is defined - in the maxblocks member of the babd block table description structure. + in the maxblocks member of the bad block table description structure. Reserving 4 blocks for mirrored tables should be a reasonable number. This also limits the number of blocks which are scanned for the bad block table ident pattern. @@ -1068,11 +1068,11 @@ in this page Filesystem support - The NAND driver provides all neccecary functions for a + The NAND driver provides all necessary functions for a filesystem via the MTD interface. - Filesystems must be aware of the NAND pecularities and + Filesystems must be aware of the NAND peculiarities and restrictions. One major restrictions of NAND Flash is, that you cannot write as often as you want to a page. The consecutive writes to a page, before erasing it again, are restricted to 1-3 writes, depending on the @@ -1222,7 +1222,7 @@ in this page #define NAND_BBT_VERSION 0x00000100 /* Create a bbt if none axists */ #define NAND_BBT_CREATE 0x00000200 -/* Write bbt if neccecary */ +/* Write bbt if necessary */ #define NAND_BBT_WRITE 0x00001000 /* Read and write back block contents when writing bbt */ #define NAND_BBT_SAVECONTENT 0x00002000 -- cgit v1.2.3 From 0ba4f6e4006634cf566ba9cc3acd40aebee44503 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Sat, 12 Jul 2014 09:55:28 -0700 Subject: DocBook: fix various typos This patch fixed spelling typo in various template files within Documentation/Docbook. Signed-off-by: Masanari Iida Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/DocBook/gadget.tmpl | 2 +- Documentation/DocBook/genericirq.tmpl | 4 ++-- Documentation/DocBook/kernel-locking.tmpl | 2 +- Documentation/DocBook/libata.tmpl | 6 +++--- Documentation/DocBook/media_api.tmpl | 2 +- Documentation/DocBook/regulator.tmpl | 2 +- Documentation/DocBook/uio-howto.tmpl | 4 ++-- Documentation/DocBook/usb.tmpl | 2 +- Documentation/DocBook/writing-an-alsa-driver.tmpl | 2 +- 9 files changed, 13 insertions(+), 13 deletions(-) diff --git a/Documentation/DocBook/gadget.tmpl b/Documentation/DocBook/gadget.tmpl index 4017f147ba2f..2c425d70f7e2 100644 --- a/Documentation/DocBook/gadget.tmpl +++ b/Documentation/DocBook/gadget.tmpl @@ -708,7 +708,7 @@ hardware level details could be very different. Systems need specialized hardware support to implement OTG, notably including a special Mini-AB jack -and associated transciever to support Dual-Role +and associated transceiver to support Dual-Role operation: they can act either as a host, using the standard Linux-USB host side driver stack, diff --git a/Documentation/DocBook/genericirq.tmpl b/Documentation/DocBook/genericirq.tmpl index 46347f603353..59fb5c077541 100644 --- a/Documentation/DocBook/genericirq.tmpl +++ b/Documentation/DocBook/genericirq.tmpl @@ -182,7 +182,7 @@ Each interrupt is described by an interrupt descriptor structure irq_desc. The interrupt is referenced by an 'unsigned int' numeric - value which selects the corresponding interrupt decription structure + value which selects the corresponding interrupt description structure in the descriptor structures array. The descriptor structure contains status information and pointers to the interrupt flow method and the interrupt chip structure @@ -470,7 +470,7 @@ if (desc->irq_data.chip->irq_eoi) To avoid copies of identical implementations of IRQ chips the core provides a configurable generic interrupt chip - implementation. Developers should check carefuly whether the + implementation. Developers should check carefully whether the generic chip fits their needs before implementing the same functionality slightly differently themselves. diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl index 19f2a5a5a5b4..e584ee12a1e7 100644 --- a/Documentation/DocBook/kernel-locking.tmpl +++ b/Documentation/DocBook/kernel-locking.tmpl @@ -1760,7 +1760,7 @@ as it would be on UP. -There is a furthur optimization possible here: remember our original +There is a further optimization possible here: remember our original cache code, where there were no reference counts and the caller simply held the lock whenever using the object? This is still possible: if you hold the lock, no one can delete the object, so you don't need to diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index deb71baed328..d7fcdc5a4379 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -677,7 +677,7 @@ and other resources, etc. - ATA_QCFLAG_ACTIVE is clared from qc->flags. + ATA_QCFLAG_ACTIVE is cleared from qc->flags. @@ -708,7 +708,7 @@ and other resources, etc. - qc->waiting is claread & completed (in that order). + qc->waiting is cleared & completed (in that order). @@ -1163,7 +1163,7 @@ and other resources, etc. Once sense data is acquired, this type of errors can be - handled similary to other SCSI errors. Note that sense data + handled similarly to other SCSI errors. Note that sense data may indicate ATA bus error (e.g. Sense Key 04h HARDWARE ERROR && ASC/ASCQ 47h/00h SCSI PARITY ERROR). In such cases, the error should be considered as an ATA bus error and diff --git a/Documentation/DocBook/media_api.tmpl b/Documentation/DocBook/media_api.tmpl index 4decb46bfa76..03f9a1f8d413 100644 --- a/Documentation/DocBook/media_api.tmpl +++ b/Documentation/DocBook/media_api.tmpl @@ -68,7 +68,7 @@ several digital tv standards. While it is called as DVB API, in fact it covers several different video standards including DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated - to documment support also for DVB-S2, ISDB-T and ISDB-S. + to document support also for DVB-S2, ISDB-T and ISDB-S. The third part covers the Remote Controller API. The fourth part covers the Media Controller API. For additional information and for the latest development code, diff --git a/Documentation/DocBook/regulator.tmpl b/Documentation/DocBook/regulator.tmpl index 346e552fa2cc..3b08a085d2c7 100644 --- a/Documentation/DocBook/regulator.tmpl +++ b/Documentation/DocBook/regulator.tmpl @@ -155,7 +155,7 @@ release regulators. Functions are provided to enable and disable the - reguator and to get and set the runtime parameters of the + regulator and to get and set the runtime parameters of the regulator. diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl index 95618159e29b..bbe9c1fd5cef 100644 --- a/Documentation/DocBook/uio-howto.tmpl +++ b/Documentation/DocBook/uio-howto.tmpl @@ -766,10 +766,10 @@ framework to set up sysfs files for this region. Simply leave it alone. The dynamic memory regions will be allocated when the UIO device file, /dev/uioX is opened. - Simiar to static memory resources, the memory region information for + Similar to static memory resources, the memory region information for dynamic regions is then visible via sysfs at /sys/class/uio/uioX/maps/mapY/*. - The dynmaic memory regions will be freed when the UIO device file is + The dynamic memory regions will be freed when the UIO device file is closed. When no processes are holding the device file open, the address returned to userspace is ~0. diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl index 8d57c1888dca..85fc0e28576f 100644 --- a/Documentation/DocBook/usb.tmpl +++ b/Documentation/DocBook/usb.tmpl @@ -153,7 +153,7 @@ The Linux USB API supports synchronous calls for control and bulk messages. - It also supports asynchnous calls for all kinds of data transfer, + It also supports asynchronous calls for all kinds of data transfer, using request structures called "URBs" (USB Request Blocks). diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl index d0056a4e9c53..6f639d9530b5 100644 --- a/Documentation/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl @@ -5696,7 +5696,7 @@ struct _snd_pcm_runtime { suspending the PCM operations via snd_pcm_suspend_all() or snd_pcm_suspend(). It means that the PCM - streams are already stoppped when the register snapshot is + streams are already stopped when the register snapshot is taken. But, remember that you don't have to restart the PCM stream in the resume callback. It'll be restarted via trigger call with SNDRV_PCM_TRIGGER_RESUME -- cgit v1.2.3 From 3a57cc5f1935d824c36264e0fa888d7d6a9038c0 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Sat, 12 Jul 2014 09:56:22 -0700 Subject: Documenation/laptops: rename and update hpfall.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Dell kernel driver dell-smo8800 provides same freefall interface as hp_accel so program hpfall.c works also on Dell laptops. So rename it to freefall.c. Dell driver does not provide hp::hddprotect led so make sure that freefall.c works also if hp::hddprotect does not exist in sysfs. Additionally write info to syslog. Signed-off-by: Pali Rohár Cc: Sonal Santan Acked-by: Pavel Machek Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/laptops/00-INDEX | 4 +- Documentation/laptops/freefall.c | 177 +++++++++++++++++++++++++++++++++++++++ Documentation/laptops/hpfall.c | 146 -------------------------------- 3 files changed, 179 insertions(+), 148 deletions(-) create mode 100644 Documentation/laptops/freefall.c delete mode 100644 Documentation/laptops/hpfall.c diff --git a/Documentation/laptops/00-INDEX b/Documentation/laptops/00-INDEX index d13b9a9a9e00..d399ae1fc724 100644 --- a/Documentation/laptops/00-INDEX +++ b/Documentation/laptops/00-INDEX @@ -8,8 +8,8 @@ disk-shock-protection.txt - information on hard disk shock protection. dslm.c - Simple Disk Sleep Monitor program -hpfall.c - - (HP) laptop accelerometer program for disk protection. +freefall.c + - (HP/DELL) laptop accelerometer program for disk protection. laptop-mode.txt - how to conserve battery power using laptop-mode. sony-laptop.txt diff --git a/Documentation/laptops/freefall.c b/Documentation/laptops/freefall.c new file mode 100644 index 000000000000..aab2ff09e868 --- /dev/null +++ b/Documentation/laptops/freefall.c @@ -0,0 +1,177 @@ +/* Disk protection for HP/DELL machines. + * + * Copyright 2008 Eric Piel + * Copyright 2009 Pavel Machek + * Copyright 2012 Sonal Santan + * Copyright 2014 Pali Rohár + * + * GPLv2. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int noled; +static char unload_heads_path[64]; +static char device_path[32]; +static const char app_name[] = "FREE FALL"; + +static int set_unload_heads_path(char *device) +{ + char devname[64]; + + if (strlen(device) <= 5 || strncmp(device, "/dev/", 5) != 0) + return -EINVAL; + strncpy(devname, device + 5, sizeof(devname) - 1); + strncpy(device_path, device, sizeof(device_path) - 1); + + snprintf(unload_heads_path, sizeof(unload_heads_path) - 1, + "/sys/block/%s/device/unload_heads", devname); + return 0; +} + +static int valid_disk(void) +{ + int fd = open(unload_heads_path, O_RDONLY); + + if (fd < 0) { + perror(unload_heads_path); + return 0; + } + + close(fd); + return 1; +} + +static void write_int(char *path, int i) +{ + char buf[1024]; + int fd = open(path, O_RDWR); + + if (fd < 0) { + perror("open"); + exit(1); + } + + sprintf(buf, "%d", i); + + if (write(fd, buf, strlen(buf)) != strlen(buf)) { + perror("write"); + exit(1); + } + + close(fd); +} + +static void set_led(int on) +{ + if (noled) + return; + write_int("/sys/class/leds/hp::hddprotect/brightness", on); +} + +static void protect(int seconds) +{ + const char *str = (seconds == 0) ? "Unparked" : "Parked"; + + write_int(unload_heads_path, seconds*1000); + syslog(LOG_INFO, "%s %s disk head\n", str, device_path); +} + +static int on_ac(void) +{ + /* /sys/class/power_supply/AC0/online */ + return 1; +} + +static int lid_open(void) +{ + /* /proc/acpi/button/lid/LID/state */ + return 1; +} + +static void ignore_me(int signum) +{ + protect(0); + set_led(0); +} + +int main(int argc, char **argv) +{ + int fd, ret; + struct stat st; + struct sched_param param; + + if (argc == 1) + ret = set_unload_heads_path("/dev/sda"); + else if (argc == 2) + ret = set_unload_heads_path(argv[1]); + else + ret = -EINVAL; + + if (ret || !valid_disk()) { + fprintf(stderr, "usage: %s (default: /dev/sda)\n", + argv[0]); + exit(1); + } + + fd = open("/dev/freefall", O_RDONLY); + if (fd < 0) { + perror("/dev/freefall"); + return EXIT_FAILURE; + } + + if (stat("/sys/class/leds/hp::hddprotect/brightness", &st)) + noled = 1; + + if (daemon(0, 0) != 0) { + perror("daemon"); + return EXIT_FAILURE; + } + + openlog(app_name, LOG_CONS | LOG_PID | LOG_NDELAY, LOG_LOCAL1); + + param.sched_priority = sched_get_priority_max(SCHED_FIFO); + sched_setscheduler(0, SCHED_FIFO, ¶m); + mlockall(MCL_CURRENT|MCL_FUTURE); + + signal(SIGALRM, ignore_me); + + for (;;) { + unsigned char count; + + ret = read(fd, &count, sizeof(count)); + alarm(0); + if ((ret == -1) && (errno == EINTR)) { + /* Alarm expired, time to unpark the heads */ + continue; + } + + if (ret != sizeof(count)) { + perror("read"); + break; + } + + protect(21); + set_led(1); + if (1 || on_ac() || lid_open()) + alarm(2); + else + alarm(20); + } + + closelog(); + close(fd); + return EXIT_SUCCESS; +} diff --git a/Documentation/laptops/hpfall.c b/Documentation/laptops/hpfall.c deleted file mode 100644 index b85dbbac0499..000000000000 --- a/Documentation/laptops/hpfall.c +++ /dev/null @@ -1,146 +0,0 @@ -/* Disk protection for HP machines. - * - * Copyright 2008 Eric Piel - * Copyright 2009 Pavel Machek - * - * GPLv2. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -char unload_heads_path[64]; - -int set_unload_heads_path(char *device) -{ - char devname[64]; - - if (strlen(device) <= 5 || strncmp(device, "/dev/", 5) != 0) - return -EINVAL; - strncpy(devname, device + 5, sizeof(devname)); - - snprintf(unload_heads_path, sizeof(unload_heads_path) - 1, - "/sys/block/%s/device/unload_heads", devname); - return 0; -} -int valid_disk(void) -{ - int fd = open(unload_heads_path, O_RDONLY); - if (fd < 0) { - perror(unload_heads_path); - return 0; - } - - close(fd); - return 1; -} - -void write_int(char *path, int i) -{ - char buf[1024]; - int fd = open(path, O_RDWR); - if (fd < 0) { - perror("open"); - exit(1); - } - sprintf(buf, "%d", i); - if (write(fd, buf, strlen(buf)) != strlen(buf)) { - perror("write"); - exit(1); - } - close(fd); -} - -void set_led(int on) -{ - write_int("/sys/class/leds/hp::hddprotect/brightness", on); -} - -void protect(int seconds) -{ - write_int(unload_heads_path, seconds*1000); -} - -int on_ac(void) -{ -// /sys/class/power_supply/AC0/online -} - -int lid_open(void) -{ -// /proc/acpi/button/lid/LID/state -} - -void ignore_me(void) -{ - protect(0); - set_led(0); -} - -int main(int argc, char **argv) -{ - int fd, ret; - struct sched_param param; - - if (argc == 1) - ret = set_unload_heads_path("/dev/sda"); - else if (argc == 2) - ret = set_unload_heads_path(argv[1]); - else - ret = -EINVAL; - - if (ret || !valid_disk()) { - fprintf(stderr, "usage: %s (default: /dev/sda)\n", - argv[0]); - exit(1); - } - - fd = open("/dev/freefall", O_RDONLY); - if (fd < 0) { - perror("/dev/freefall"); - return EXIT_FAILURE; - } - - daemon(0, 0); - param.sched_priority = sched_get_priority_max(SCHED_FIFO); - sched_setscheduler(0, SCHED_FIFO, ¶m); - mlockall(MCL_CURRENT|MCL_FUTURE); - - signal(SIGALRM, ignore_me); - - for (;;) { - unsigned char count; - - ret = read(fd, &count, sizeof(count)); - alarm(0); - if ((ret == -1) && (errno == EINTR)) { - /* Alarm expired, time to unpark the heads */ - continue; - } - - if (ret != sizeof(count)) { - perror("read"); - break; - } - - protect(21); - set_led(1); - if (1 || on_ac() || lid_open()) - alarm(2); - else - alarm(20); - } - - close(fd); - return EXIT_SUCCESS; -} -- cgit v1.2.3 From 3f1f9b851311a76226140b55b1ea22111234a7c2 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 12 Jul 2014 15:32:24 -0400 Subject: ext4: fix a potential deadlock in __ext4_es_shrink() This fixes the following lockdep complaint: [ INFO: possible circular locking dependency detected ] 3.16.0-rc2-mm1+ #7 Tainted: G O ------------------------------------------------------- kworker/u24:0/4356 is trying to acquire lock: (&(&sbi->s_es_lru_lock)->rlock){+.+.-.}, at: [] __ext4_es_shrink+0x4f/0x2e0 but task is already holding lock: (&ei->i_es_lock){++++-.}, at: [] ext4_es_insert_extent+0x71/0x180 which lock already depends on the new lock. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->i_es_lock); lock(&(&sbi->s_es_lru_lock)->rlock); lock(&ei->i_es_lock); lock(&(&sbi->s_es_lru_lock)->rlock); *** DEADLOCK *** 6 locks held by kworker/u24:0/4356: #0: ("writeback"){.+.+.+}, at: [] process_one_work+0x180/0x560 #1: ((&(&wb->dwork)->work)){+.+.+.}, at: [] process_one_work+0x180/0x560 #2: (&type->s_umount_key#22){++++++}, at: [] grab_super_passive+0x44/0x90 #3: (jbd2_handle){+.+...}, at: [] start_this_handle+0x189/0x5f0 #4: (&ei->i_data_sem){++++..}, at: [] ext4_map_blocks+0x132/0x550 #5: (&ei->i_es_lock){++++-.}, at: [] ext4_es_insert_extent+0x71/0x180 stack backtrace: CPU: 0 PID: 4356 Comm: kworker/u24:0 Tainted: G O 3.16.0-rc2-mm1+ #7 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: writeback bdi_writeback_workfn (flush-253:0) ffffffff8213dce0 ffff880014b07538 ffffffff815df0bb 0000000000000007 ffffffff8213e040 ffff880014b07588 ffffffff815db3dd ffff880014b07568 ffff880014b07610 ffff88003b868930 ffff88003b868908 ffff88003b868930 Call Trace: [] dump_stack+0x4e/0x68 [] print_circular_bug+0x1fb/0x20c [] __lock_acquire+0x163e/0x1d00 [] ? retint_restore_args+0xe/0xe [] ? __slab_alloc+0x4a8/0x4ce [] ? __ext4_es_shrink+0x4f/0x2e0 [] lock_acquire+0x87/0x120 [] ? __ext4_es_shrink+0x4f/0x2e0 [] ? ext4_es_free_extent+0x5d/0x70 [] _raw_spin_lock+0x39/0x50 [] ? __ext4_es_shrink+0x4f/0x2e0 [] ? kmem_cache_alloc+0x18b/0x1a0 [] __ext4_es_shrink+0x4f/0x2e0 [] ext4_es_insert_extent+0xc8/0x180 [] ext4_map_blocks+0x1c4/0x550 [] ext4_writepages+0x6d4/0xd00 ... Reported-by: Minchan Kim Signed-off-by: Theodore Ts'o Reported-by: Minchan Kim Cc: stable@vger.kernel.org Cc: Zheng Liu --- fs/ext4/extents_status.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ext4/extents_status.c b/fs/ext4/extents_status.c index 3f5c188953a4..0b7e28e7eaa4 100644 --- a/fs/ext4/extents_status.c +++ b/fs/ext4/extents_status.c @@ -966,10 +966,10 @@ retry: continue; } - if (ei->i_es_lru_nr == 0 || ei == locked_ei) + if (ei->i_es_lru_nr == 0 || ei == locked_ei || + !write_trylock(&ei->i_es_lock)) continue; - write_lock(&ei->i_es_lock); shrunk = __es_try_to_reclaim_extents(ei, nr_to_scan); if (ei->i_es_lru_nr == 0) list_del_init(&ei->i_es_lru); -- cgit v1.2.3 From bf40c92635d63fcc574c52649f7cda13e0418ac1 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sat, 12 Jul 2014 16:11:42 -0400 Subject: ext4: fix potential null pointer dereference in ext4_free_inode Fix potential null pointer dereferencing problem caused by e43bb4e612 ("ext4: decrement free clusters/inodes counters when block group declared bad") Reported-by: Dan Carpenter Signed-off-by: Namjae Jeon Signed-off-by: Ashish Sangwan Signed-off-by: Theodore Ts'o Reviewed-by: Lukas Czerner --- fs/ext4/ialloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index 0840bf321cdb..5b87fc36aab8 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -338,7 +338,7 @@ out: fatal = err; } else { ext4_error(sb, "bit already cleared for inode %lu", ino); - if (!EXT4_MB_GRP_IBITMAP_CORRUPT(grp)) { + if (gdp && !EXT4_MB_GRP_IBITMAP_CORRUPT(grp)) { int count; count = ext4_free_inodes_count(sb, gdp); percpu_counter_sub(&sbi->s_freeinodes_counter, -- cgit v1.2.3 From 17089a29a25a3bfe8d14520cd866b7d635ffe5ba Mon Sep 17 00:00:00 2001 From: Weston Andros Adamson Date: Fri, 11 Jul 2014 10:20:45 -0400 Subject: nfs: mark nfs_page reqs with flag for extra ref Change the use of PG_INODE_REF - set it when taking extra reference on subrequests and take care to only release once for each request. Signed-off-by: Weston Andros Adamson Signed-off-by: Trond Myklebust --- fs/nfs/pagelist.c | 4 +++- fs/nfs/write.c | 8 ++++++-- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c index b6ee3a6ee96d..7368b2130a41 100644 --- a/fs/nfs/pagelist.c +++ b/fs/nfs/pagelist.c @@ -251,8 +251,10 @@ nfs_page_group_init(struct nfs_page *req, struct nfs_page *prev) /* grab extra ref if head request has extra ref from * the write/commit path to handle handoff between write * and commit lists */ - if (test_bit(PG_INODE_REF, &prev->wb_head->wb_flags)) + if (test_bit(PG_INODE_REF, &prev->wb_head->wb_flags)) { + set_bit(PG_INODE_REF, &req->wb_flags); kref_get(&req->wb_kref); + } } } diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 98ff061ccaf3..8e5745a4deff 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -448,7 +448,9 @@ static void nfs_inode_add_request(struct inode *inode, struct nfs_page *req) set_page_private(req->wb_page, (unsigned long)req); } nfsi->npages++; - set_bit(PG_INODE_REF, &req->wb_flags); + /* this a head request for a page group - mark it as having an + * extra reference so sub groups can follow suit */ + WARN_ON(test_and_set_bit(PG_INODE_REF, &req->wb_flags)); kref_get(&req->wb_kref); spin_unlock(&inode->i_lock); } @@ -474,7 +476,9 @@ static void nfs_inode_remove_request(struct nfs_page *req) nfsi->npages--; spin_unlock(&inode->i_lock); } - nfs_release_request(req); + + if (test_and_clear_bit(PG_INODE_REF, &req->wb_flags)) + nfs_release_request(req); } static void -- cgit v1.2.3 From 85710a837c2026aae80b7c64187edf1f10027b0b Mon Sep 17 00:00:00 2001 From: Weston Andros Adamson Date: Fri, 11 Jul 2014 10:20:46 -0400 Subject: nfs: nfs_page should take a ref on the head req nfs_pages that aren't the the head of a group must take a reference on the head as long as ->wb_head is set to it. This stops the head from hitting a refcount of 0 while there is still an active nfs_page for the page group. This avoids kref warnings in the writeback code when the page group head is found and referenced. Signed-off-by: Weston Andros Adamson Signed-off-by: Trond Myklebust --- fs/nfs/pagelist.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c index 7368b2130a41..05a63593a61f 100644 --- a/fs/nfs/pagelist.c +++ b/fs/nfs/pagelist.c @@ -239,15 +239,21 @@ nfs_page_group_init(struct nfs_page *req, struct nfs_page *prev) WARN_ON_ONCE(prev == req); if (!prev) { + /* a head request */ req->wb_head = req; req->wb_this_page = req; } else { + /* a subrequest */ WARN_ON_ONCE(prev->wb_this_page != prev->wb_head); WARN_ON_ONCE(!test_bit(PG_HEADLOCK, &prev->wb_head->wb_flags)); req->wb_head = prev->wb_head; req->wb_this_page = prev->wb_this_page; prev->wb_this_page = req; + /* All subrequests take a ref on the head request until + * nfs_page_group_destroy is called */ + kref_get(&req->wb_head->wb_kref); + /* grab extra ref if head request has extra ref from * the write/commit path to handle handoff between write * and commit lists */ @@ -271,6 +277,10 @@ nfs_page_group_destroy(struct kref *kref) struct nfs_page *req = container_of(kref, struct nfs_page, wb_kref); struct nfs_page *tmp, *next; + /* subrequests must release the ref on the head request */ + if (req->wb_head != req) + nfs_release_request(req->wb_head); + if (!nfs_page_group_sync_on_bit(req, PG_TEARDOWN)) return; -- cgit v1.2.3 From 84d3a9a913ba6a90c79b7763d063bb42554a8906 Mon Sep 17 00:00:00 2001 From: Weston Andros Adamson Date: Fri, 11 Jul 2014 10:20:47 -0400 Subject: nfs: change find_request to find_head_request nfs_page_find_request_locked* should find the head request for that page. Rename the functions and add comments to make this clear, and fix a bug that could return a subrequest when page_private isn't set on the page. Signed-off-by: Weston Andros Adamson Signed-off-by: Trond Myklebust --- fs/nfs/write.c | 33 ++++++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 9 deletions(-) diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 8e5745a4deff..53c4a9917dac 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -91,8 +91,15 @@ static void nfs_context_set_write_error(struct nfs_open_context *ctx, int error) set_bit(NFS_CONTEXT_ERROR_WRITE, &ctx->flags); } +/* + * nfs_page_find_head_request_locked - find head request associated with @page + * + * must be called while holding the inode lock. + * + * returns matching head request with reference held, or NULL if not found. + */ static struct nfs_page * -nfs_page_find_request_locked(struct nfs_inode *nfsi, struct page *page) +nfs_page_find_head_request_locked(struct nfs_inode *nfsi, struct page *page) { struct nfs_page *req = NULL; @@ -104,25 +111,33 @@ nfs_page_find_request_locked(struct nfs_inode *nfsi, struct page *page) /* Linearly search the commit list for the correct req */ list_for_each_entry_safe(freq, t, &nfsi->commit_info.list, wb_list) { if (freq->wb_page == page) { - req = freq; + req = freq->wb_head; break; } } } - if (req) + if (req) { + WARN_ON_ONCE(req->wb_head != req); + kref_get(&req->wb_kref); + } return req; } -static struct nfs_page *nfs_page_find_request(struct page *page) +/* + * nfs_page_find_head_request - find head request associated with @page + * + * returns matching head request with reference held, or NULL if not found. + */ +static struct nfs_page *nfs_page_find_head_request(struct page *page) { struct inode *inode = page_file_mapping(page)->host; struct nfs_page *req = NULL; spin_lock(&inode->i_lock); - req = nfs_page_find_request_locked(NFS_I(inode), page); + req = nfs_page_find_head_request_locked(NFS_I(inode), page); spin_unlock(&inode->i_lock); return req; } @@ -282,7 +297,7 @@ static struct nfs_page *nfs_find_and_lock_request(struct page *page, bool nonblo spin_lock(&inode->i_lock); for (;;) { - req = nfs_page_find_request_locked(NFS_I(inode), page); + req = nfs_page_find_head_request_locked(NFS_I(inode), page); if (req == NULL) break; if (nfs_lock_request(req)) @@ -773,7 +788,7 @@ static struct nfs_page *nfs_try_to_update_request(struct inode *inode, spin_lock(&inode->i_lock); for (;;) { - req = nfs_page_find_request_locked(NFS_I(inode), page); + req = nfs_page_find_head_request_locked(NFS_I(inode), page); if (req == NULL) goto out_unlock; @@ -881,7 +896,7 @@ int nfs_flush_incompatible(struct file *file, struct page *page) * dropped page. */ do { - req = nfs_page_find_request(page); + req = nfs_page_find_head_request(page); if (req == NULL) return 0; l_ctx = req->wb_lock_context; @@ -1575,7 +1590,7 @@ int nfs_wb_page_cancel(struct inode *inode, struct page *page) for (;;) { wait_on_page_writeback(page); - req = nfs_page_find_request(page); + req = nfs_page_find_head_request(page); if (req == NULL) break; if (nfs_lock_request(req)) { -- cgit v1.2.3 From d458138353726ea6dcbc53ae3597e489d0432c25 Mon Sep 17 00:00:00 2001 From: Weston Andros Adamson Date: Fri, 11 Jul 2014 10:20:48 -0400 Subject: nfs: handle multiple reqs in nfs_page_async_flush Change nfs_find_and_lock_request so nfs_page_async_flush can handle multiple requests in a page. There is only one request for a page the first time nfs_page_async_flush is called, but if a write or commit fails, async_flush is called again and there may be multiple requests associated with the page. The solution is to merge all the requests in a page group into a single request before calling nfs_pageio_add_request. Rename nfs_find_and_lock_request to nfs_lock_and_join_requests and change it to first lock all requests for the page, then cancel and merge all subrequests into the head request. Signed-off-by: Weston Andros Adamson Signed-off-by: Trond Myklebust --- fs/nfs/internal.h | 1 + fs/nfs/pagelist.c | 4 +- fs/nfs/write.c | 255 +++++++++++++++++++++++++++++++++++++++++++++++++----- 3 files changed, 235 insertions(+), 25 deletions(-) diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index 82ddbf46660e..f415cbf9f6c3 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -244,6 +244,7 @@ void nfs_pgio_data_release(struct nfs_pgio_data *); int nfs_generic_pgio(struct nfs_pageio_descriptor *, struct nfs_pgio_header *); int nfs_initiate_pgio(struct rpc_clnt *, struct nfs_pgio_data *, const struct rpc_call_ops *, int, int); +void nfs_free_request(struct nfs_page *req); static inline void nfs_iocounter_init(struct nfs_io_counter *c) { diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c index 05a63593a61f..0aefc8102b6b 100644 --- a/fs/nfs/pagelist.c +++ b/fs/nfs/pagelist.c @@ -29,8 +29,6 @@ static struct kmem_cache *nfs_page_cachep; static const struct rpc_call_ops nfs_pgio_common_ops; -static void nfs_free_request(struct nfs_page *); - static bool nfs_pgarray_set(struct nfs_page_array *p, unsigned int pagecount) { p->npages = pagecount; @@ -406,7 +404,7 @@ static void nfs_clear_request(struct nfs_page *req) * * Note: Should never be called with the spinlock held! */ -static void nfs_free_request(struct nfs_page *req) +void nfs_free_request(struct nfs_page *req) { WARN_ON_ONCE(req->wb_this_page != req); diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 53c4a9917dac..9f4424c464a0 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -46,6 +46,7 @@ static const struct rpc_call_ops nfs_commit_ops; static const struct nfs_pgio_completion_ops nfs_async_write_completion_ops; static const struct nfs_commit_completion_ops nfs_commit_completion_ops; static const struct nfs_rw_ops nfs_rw_write_ops; +static void nfs_clear_request_commit(struct nfs_page *req); static struct kmem_cache *nfs_wdata_cachep; static mempool_t *nfs_wdata_mempool; @@ -289,36 +290,246 @@ static void nfs_end_page_writeback(struct nfs_page *req) clear_bdi_congested(&nfss->backing_dev_info, BLK_RW_ASYNC); } -static struct nfs_page *nfs_find_and_lock_request(struct page *page, bool nonblock) + +/* nfs_page_group_clear_bits + * @req - an nfs request + * clears all page group related bits from @req + */ +static void +nfs_page_group_clear_bits(struct nfs_page *req) +{ + clear_bit(PG_TEARDOWN, &req->wb_flags); + clear_bit(PG_UNLOCKPAGE, &req->wb_flags); + clear_bit(PG_UPTODATE, &req->wb_flags); + clear_bit(PG_WB_END, &req->wb_flags); + clear_bit(PG_REMOVE, &req->wb_flags); +} + + +/* + * nfs_unroll_locks_and_wait - unlock all newly locked reqs and wait on @req + * + * this is a helper function for nfs_lock_and_join_requests + * + * @inode - inode associated with request page group, must be holding inode lock + * @head - head request of page group, must be holding head lock + * @req - request that couldn't lock and needs to wait on the req bit lock + * @nonblock - if true, don't actually wait + * + * NOTE: this must be called holding page_group bit lock and inode spin lock + * and BOTH will be released before returning. + * + * returns 0 on success, < 0 on error. + */ +static int +nfs_unroll_locks_and_wait(struct inode *inode, struct nfs_page *head, + struct nfs_page *req, bool nonblock) + __releases(&inode->i_lock) +{ + struct nfs_page *tmp; + int ret; + + /* relinquish all the locks successfully grabbed this run */ + for (tmp = head ; tmp != req; tmp = tmp->wb_this_page) + nfs_unlock_request(tmp); + + WARN_ON_ONCE(test_bit(PG_TEARDOWN, &req->wb_flags)); + + /* grab a ref on the request that will be waited on */ + kref_get(&req->wb_kref); + + nfs_page_group_unlock(head); + spin_unlock(&inode->i_lock); + + /* release ref from nfs_page_find_head_request_locked */ + nfs_release_request(head); + + if (!nonblock) + ret = nfs_wait_on_request(req); + else + ret = -EAGAIN; + nfs_release_request(req); + + return ret; +} + +/* + * nfs_destroy_unlinked_subrequests - destroy recently unlinked subrequests + * + * @destroy_list - request list (using wb_this_page) terminated by @old_head + * @old_head - the old head of the list + * + * All subrequests must be locked and removed from all lists, so at this point + * they are only "active" in this function, and possibly in nfs_wait_on_request + * with a reference held by some other context. + */ +static void +nfs_destroy_unlinked_subrequests(struct nfs_page *destroy_list, + struct nfs_page *old_head) +{ + while (destroy_list) { + struct nfs_page *subreq = destroy_list; + + destroy_list = (subreq->wb_this_page == old_head) ? + NULL : subreq->wb_this_page; + + WARN_ON_ONCE(old_head != subreq->wb_head); + + /* make sure old group is not used */ + subreq->wb_head = subreq; + subreq->wb_this_page = subreq; + + nfs_clear_request_commit(subreq); + + /* subreq is now totally disconnected from page group or any + * write / commit lists. last chance to wake any waiters */ + nfs_unlock_request(subreq); + + if (!test_bit(PG_TEARDOWN, &subreq->wb_flags)) { + /* release ref on old head request */ + nfs_release_request(old_head); + + nfs_page_group_clear_bits(subreq); + + /* release the PG_INODE_REF reference */ + if (test_and_clear_bit(PG_INODE_REF, &subreq->wb_flags)) + nfs_release_request(subreq); + else + WARN_ON_ONCE(1); + } else { + WARN_ON_ONCE(test_bit(PG_CLEAN, &subreq->wb_flags)); + /* zombie requests have already released the last + * reference and were waiting on the rest of the + * group to complete. Since it's no longer part of a + * group, simply free the request */ + nfs_page_group_clear_bits(subreq); + nfs_free_request(subreq); + } + } +} + +/* + * nfs_lock_and_join_requests - join all subreqs to the head req and return + * a locked reference, cancelling any pending + * operations for this page. + * + * @page - the page used to lookup the "page group" of nfs_page structures + * @nonblock - if true, don't block waiting for request locks + * + * This function joins all sub requests to the head request by first + * locking all requests in the group, cancelling any pending operations + * and finally updating the head request to cover the whole range covered by + * the (former) group. All subrequests are removed from any write or commit + * lists, unlinked from the group and destroyed. + * + * Returns a locked, referenced pointer to the head request - which after + * this call is guaranteed to be the only request associated with the page. + * Returns NULL if no requests are found for @page, or a ERR_PTR if an + * error was encountered. + */ +static struct nfs_page * +nfs_lock_and_join_requests(struct page *page, bool nonblock) { struct inode *inode = page_file_mapping(page)->host; - struct nfs_page *req; + struct nfs_page *head, *subreq; + struct nfs_page *destroy_list = NULL; + unsigned int total_bytes; int ret; +try_again: + total_bytes = 0; + + WARN_ON_ONCE(destroy_list); + spin_lock(&inode->i_lock); - for (;;) { - req = nfs_page_find_head_request_locked(NFS_I(inode), page); - if (req == NULL) - break; - if (nfs_lock_request(req)) - break; - /* Note: If we hold the page lock, as is the case in nfs_writepage, - * then the call to nfs_lock_request() will always - * succeed provided that someone hasn't already marked the - * request as dirty (in which case we don't care). - */ + + /* + * A reference is taken only on the head request which acts as a + * reference to the whole page group - the group will not be destroyed + * until the head reference is released. + */ + head = nfs_page_find_head_request_locked(NFS_I(inode), page); + + if (!head) { spin_unlock(&inode->i_lock); - if (!nonblock) - ret = nfs_wait_on_request(req); - else - ret = -EAGAIN; - nfs_release_request(req); - if (ret != 0) + return NULL; + } + + /* lock each request in the page group */ + nfs_page_group_lock(head); + subreq = head; + do { + /* + * Subrequests are always contiguous, non overlapping + * and in order. If not, it's a programming error. + */ + WARN_ON_ONCE(subreq->wb_offset != + (head->wb_offset + total_bytes)); + + /* keep track of how many bytes this group covers */ + total_bytes += subreq->wb_bytes; + + if (!nfs_lock_request(subreq)) { + /* releases page group bit lock and + * inode spin lock and all references */ + ret = nfs_unroll_locks_and_wait(inode, head, + subreq, nonblock); + + if (ret == 0) + goto try_again; + return ERR_PTR(ret); - spin_lock(&inode->i_lock); + } + + subreq = subreq->wb_this_page; + } while (subreq != head); + + /* Now that all requests are locked, make sure they aren't on any list. + * Commit list removal accounting is done after locks are dropped */ + subreq = head; + do { + nfs_list_remove_request(subreq); + subreq = subreq->wb_this_page; + } while (subreq != head); + + /* unlink subrequests from head, destroy them later */ + if (head->wb_this_page != head) { + /* destroy list will be terminated by head */ + destroy_list = head->wb_this_page; + head->wb_this_page = head; + + /* change head request to cover whole range that + * the former page group covered */ + head->wb_bytes = total_bytes; } + + /* + * prepare head request to be added to new pgio descriptor + */ + nfs_page_group_clear_bits(head); + + /* + * some part of the group was still on the inode list - otherwise + * the group wouldn't be involved in async write. + * grab a reference for the head request, iff it needs one. + */ + if (!test_and_set_bit(PG_INODE_REF, &head->wb_flags)) + kref_get(&head->wb_kref); + + nfs_page_group_unlock(head); + + /* drop lock to clear_request_commit the head req and clean up + * requests on destroy list */ spin_unlock(&inode->i_lock); - return req; + + nfs_destroy_unlinked_subrequests(destroy_list, head); + + /* clean up commit list state */ + nfs_clear_request_commit(head); + + /* still holds ref on head from nfs_page_find_head_request_locked + * and still has lock on head from lock loop */ + return head; } /* @@ -331,7 +542,7 @@ static int nfs_page_async_flush(struct nfs_pageio_descriptor *pgio, struct nfs_page *req; int ret = 0; - req = nfs_find_and_lock_request(page, nonblock); + req = nfs_lock_and_join_requests(page, nonblock); if (!req) goto out; ret = PTR_ERR(req); -- cgit v1.2.3 From 3e2170451e91327bfa8a82040fea78043847533a Mon Sep 17 00:00:00 2001 From: Weston Andros Adamson Date: Fri, 11 Jul 2014 10:20:49 -0400 Subject: nfs: handle multiple reqs in nfs_wb_page_cancel Use nfs_lock_and_join_requests to merge all subrequests into the head request - this cancels and dereferences all subrequests. Signed-off-by: Weston Andros Adamson Signed-off-by: Trond Myklebust --- fs/nfs/write.c | 41 +++++++++++++++++++++-------------------- 1 file changed, 21 insertions(+), 20 deletions(-) diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 9f4424c464a0..bdc4db23951e 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -1799,27 +1799,28 @@ int nfs_wb_page_cancel(struct inode *inode, struct page *page) struct nfs_page *req; int ret = 0; - for (;;) { - wait_on_page_writeback(page); - req = nfs_page_find_head_request(page); - if (req == NULL) - break; - if (nfs_lock_request(req)) { - nfs_clear_request_commit(req); - nfs_inode_remove_request(req); - /* - * In case nfs_inode_remove_request has marked the - * page as being dirty - */ - cancel_dirty_page(page, PAGE_CACHE_SIZE); - nfs_unlock_and_release_request(req); - break; - } - ret = nfs_wait_on_request(req); - nfs_release_request(req); - if (ret < 0) - break; + wait_on_page_writeback(page); + + /* blocking call to cancel all requests and join to a single (head) + * request */ + req = nfs_lock_and_join_requests(page, false); + + if (IS_ERR(req)) { + ret = PTR_ERR(req); + } else if (req) { + /* all requests from this page have been cancelled by + * nfs_lock_and_join_requests, so just remove the head + * request from the inode / page_private pointer and + * release it */ + nfs_inode_remove_request(req); + /* + * In case nfs_inode_remove_request has marked the + * page as being dirty + */ + cancel_dirty_page(page, PAGE_CACHE_SIZE); + nfs_unlock_and_release_request(req); } + return ret; } -- cgit v1.2.3 From aafe37504c70954fc104c88d9d15d553572dae69 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 12 Jul 2014 17:23:39 -0400 Subject: NFS: Remove 2 unused variables Cc: Weston Andros Adamson Signed-off-by: Trond Myklebust --- fs/nfs/direct.c | 2 -- fs/nfs/write.c | 2 -- 2 files changed, 4 deletions(-) diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index 8f98138cbc43..f11b9eed0de1 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -756,7 +756,6 @@ static void nfs_direct_write_completion(struct nfs_pgio_header *hdr) spin_unlock(&dreq->lock); while (!list_empty(&hdr->pages)) { - bool do_destroy = true; req = nfs_list_entry(hdr->pages.next); nfs_list_remove_request(req); @@ -765,7 +764,6 @@ static void nfs_direct_write_completion(struct nfs_pgio_header *hdr) case NFS_IOHDR_NEED_COMMIT: kref_get(&req->wb_kref); nfs_mark_request_commit(req, hdr->lseg, &cinfo); - do_destroy = false; } nfs_unlock_and_release_request(req); } diff --git a/fs/nfs/write.c b/fs/nfs/write.c index bdc4db23951e..5e2f10304548 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -868,7 +868,6 @@ static void nfs_write_completion(struct nfs_pgio_header *hdr) { struct nfs_commit_info cinfo; unsigned long bytes = 0; - bool do_destroy; if (test_bit(NFS_IOHDR_REDO, &hdr->flags)) goto out; @@ -898,7 +897,6 @@ remove_req: next: nfs_unlock_request(req); nfs_end_page_writeback(req); - do_destroy = !test_bit(NFS_IOHDR_NEED_COMMIT, &hdr->flags); nfs_release_request(req); } out: -- cgit v1.2.3 From eadcc7208a2237016be7bdff4551ba7614da85c8 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 28 Jun 2014 17:44:51 +0200 Subject: parisc: add serial ports of C8000/1GHz machine to hardware database Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # 3.13+ --- arch/parisc/kernel/hardware.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c index 608716f8496b..af3bc359dc70 100644 --- a/arch/parisc/kernel/hardware.c +++ b/arch/parisc/kernel/hardware.c @@ -1210,7 +1210,8 @@ static struct hp_hardware hp_hardware_list[] = { {HPHW_FIO, 0x004, 0x00320, 0x0, "Metheus Frame Buffer"}, {HPHW_FIO, 0x004, 0x00340, 0x0, "BARCO CX4500 VME Grphx Cnsl"}, {HPHW_FIO, 0x004, 0x00360, 0x0, "Hughes TOG VME FDDI"}, - {HPHW_FIO, 0x076, 0x000AD, 0x00, "Crestone Peak RS-232"}, + {HPHW_FIO, 0x076, 0x000AD, 0x0, "Crestone Peak Core RS-232"}, + {HPHW_FIO, 0x077, 0x000AD, 0x0, "Crestone Peak Fast? Core RS-232"}, {HPHW_IOA, 0x185, 0x0000B, 0x00, "Java BC Summit Port"}, {HPHW_IOA, 0x1FF, 0x0000B, 0x00, "Hitachi Ghostview Summit Port"}, {HPHW_IOA, 0x580, 0x0000B, 0x10, "U2-IOA BC Runway Port"}, -- cgit v1.2.3 From ab8a261ba5e2dd9206da640de5870cc31d568a7c Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 10 Jul 2014 18:07:17 +0200 Subject: parisc: fix fanotify_mark() syscall on 32bit compat kernel On parisc we can not use the existing compat implementation for fanotify_mark() because for the 64bit mask parameter the higher and lower 32bits are ordered differently than what the compat function expects from big endian architectures. Specifically: It finally turned out, that on hppa we end up with different assignments of parameters to kernel arguments depending on if we call the glibc wrapper function int fanotify_mark (int __fanotify_fd, unsigned int __flags, uint64_t __mask, int __dfd, const char *__pathname); or directly calling the syscall manually syscall(__NR_fanotify_mark, ...) Reason is, that the syscall() function is implemented as C-function and because we now have the sysno as first parameter in front of the other parameters the compiler will unexpectedly add an empty paramenter in front of the u64 value to ensure the correct calling alignment for 64bit values. This means, on hppa you can't simply use syscall() to call the kernel fanotify_mark() function directly, but you have to use the glibc function instead. This patch fixes the kernel in the hppa-arch specifc coding to adjust the parameters in a way as if userspace calls the glibc wrapper function fanotify_mark(). Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # 3.13+ --- arch/parisc/kernel/sys_parisc32.c | 10 ++++++++++ arch/parisc/kernel/syscall_table.S | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c index bb9f3b64de55..ec741fe02ab6 100644 --- a/arch/parisc/kernel/sys_parisc32.c +++ b/arch/parisc/kernel/sys_parisc32.c @@ -4,6 +4,7 @@ * Copyright (C) 2000-2001 Hewlett Packard Company * Copyright (C) 2000 John Marvin * Copyright (C) 2001 Matthew Wilcox + * Copyright (C) 2014 Helge Deller * * These routines maintain argument size conversion between 32bit and 64bit * environment. Based heavily on sys_ia32.c and sys_sparc32.c. @@ -57,3 +58,12 @@ asmlinkage long sys32_unimplemented(int r26, int r25, int r24, int r23, current->comm, current->pid, r20); return -ENOSYS; } + +asmlinkage long sys32_fanotify_mark(compat_int_t fanotify_fd, compat_uint_t flags, + compat_uint_t mask0, compat_uint_t mask1, compat_int_t dfd, + const char __user * pathname) +{ + return sys_fanotify_mark(fanotify_fd, flags, + ((__u64)mask1 << 32) | mask0, + dfd, pathname); +} diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 0c9107285e66..1a0c3bf61d26 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -418,7 +418,7 @@ ENTRY_SAME(accept4) /* 320 */ ENTRY_SAME(prlimit64) ENTRY_SAME(fanotify_init) - ENTRY_COMP(fanotify_mark) + ENTRY_DIFF(fanotify_mark) ENTRY_COMP(clock_adjtime) ENTRY_SAME(name_to_handle_at) /* 325 */ ENTRY_COMP(open_by_handle_at) -- cgit v1.2.3 From fe22ddcb9f271d2af0e72d2743726cf28085b1dd Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 10 Jul 2014 18:08:11 +0200 Subject: parisc: drop unused defines and header includes Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # 3.13+ --- arch/parisc/kernel/sys_parisc32.c | 36 ------------------------------------ 1 file changed, 36 deletions(-) diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c index ec741fe02ab6..93c1963d76fe 100644 --- a/arch/parisc/kernel/sys_parisc32.c +++ b/arch/parisc/kernel/sys_parisc32.c @@ -12,44 +12,8 @@ #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include #include -#include -#include -#include - -#undef DEBUG - -#ifdef DEBUG -#define DBG(x) printk x -#else -#define DBG(x) -#endif asmlinkage long sys32_unimplemented(int r26, int r25, int r24, int r23, int r22, int r21, int r20) -- cgit v1.2.3 From 15ebb05248d025534773c9ef64915bd888f04e4b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 19 Jun 2014 21:52:23 +0000 Subject: clk: spear3xx: Use proper control register offset The control register is at offset 0x10, not 0x0. This is wreckaged since commit 5df33a62c (SPEAr: Switch to common clock framework). Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Acked-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/spear/spear3xx_clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c index c2d204315546..125eba86c844 100644 --- a/drivers/clk/spear/spear3xx_clock.c +++ b/drivers/clk/spear/spear3xx_clock.c @@ -211,7 +211,7 @@ static inline void spear310_clk_init(void) { } /* array of all spear 320 clock lookups */ #ifdef CONFIG_MACH_SPEAR320 -#define SPEAR320_CONTROL_REG (soc_config_base + 0x0000) +#define SPEAR320_CONTROL_REG (soc_config_base + 0x0010) #define SPEAR320_EXT_CTRL_REG (soc_config_base + 0x0018) #define SPEAR320_UARTX_PCLK_MASK 0x1 -- cgit v1.2.3 From 449437778bd09b73a5e51554f7219706da08917f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 19 Jun 2014 21:52:24 +0000 Subject: clk: spear3xx: Set proper clock parent of uart1/2 The uarts only work when the parent is ras_ahb_clk. The stale 3.5 based ST tree does this in the board file. Add it to the clk init function. Not pretty, but the mess there is amazing anyway. Signed-off-by: Thomas Gleixner Acked-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/spear/spear3xx_clock.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c index 125eba86c844..bb5f387774e2 100644 --- a/drivers/clk/spear/spear3xx_clock.c +++ b/drivers/clk/spear/spear3xx_clock.c @@ -245,7 +245,8 @@ static const char *smii0_parents[] = { "smii_125m_pad", "ras_pll2_clk", "ras_syn0_gclk", }; static const char *uartx_parents[] = { "ras_syn1_gclk", "ras_apb_clk", }; -static void __init spear320_clk_init(void __iomem *soc_config_base) +static void __init spear320_clk_init(void __iomem *soc_config_base, + struct clk *ras_apb_clk) { struct clk *clk; @@ -342,6 +343,8 @@ static void __init spear320_clk_init(void __iomem *soc_config_base) SPEAR320_CONTROL_REG, UART1_PCLK_SHIFT, UART1_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "a3000000.serial"); + /* Enforce ras_apb_clk */ + clk_set_parent(clk, ras_apb_clk); clk = clk_register_mux(NULL, "uart2_clk", uartx_parents, ARRAY_SIZE(uartx_parents), @@ -349,6 +352,8 @@ static void __init spear320_clk_init(void __iomem *soc_config_base) SPEAR320_EXT_CTRL_REG, SPEAR320_UART2_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "a4000000.serial"); + /* Enforce ras_apb_clk */ + clk_set_parent(clk, ras_apb_clk); clk = clk_register_mux(NULL, "uart3_clk", uartx_parents, ARRAY_SIZE(uartx_parents), @@ -379,12 +384,12 @@ static void __init spear320_clk_init(void __iomem *soc_config_base) clk_register_clkdev(clk, NULL, "60100000.serial"); } #else -static inline void spear320_clk_init(void __iomem *soc_config_base) { } +static inline void spear320_clk_init(void __iomem *sb, struct clk *rc) { } #endif void __init spear3xx_clk_init(void __iomem *misc_base, void __iomem *soc_config_base) { - struct clk *clk, *clk1; + struct clk *clk, *clk1, *ras_apb_clk; clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT, 32000); @@ -613,6 +618,7 @@ void __init spear3xx_clk_init(void __iomem *misc_base, void __iomem *soc_config_ clk = clk_register_gate(NULL, "ras_apb_clk", "apb_clk", 0, RAS_CLK_ENB, RAS_APB_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, "ras_apb_clk", NULL); + ras_apb_clk = clk; clk = clk_register_gate(NULL, "ras_32k_clk", "osc_32k_clk", 0, RAS_CLK_ENB, RAS_32K_CLK_ENB, 0, &_lock); @@ -659,5 +665,5 @@ void __init spear3xx_clk_init(void __iomem *misc_base, void __iomem *soc_config_ else if (of_machine_is_compatible("st,spear310")) spear310_clk_init(); else if (of_machine_is_compatible("st,spear320")) - spear320_clk_init(soc_config_base); + spear320_clk_init(soc_config_base, ras_apb_clk); } -- cgit v1.2.3 From 46c1376db1b85ae412a7917cec148c6e60f79428 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Fri, 20 Jun 2014 14:26:25 -0500 Subject: RDMA/cxgb4: Call iwpm_init() only once We need to only register with the iwpm core once. Currently it is being done for every adapter, which causes a failure for each adapter but the first, making multiple adapters unusable. Fixes: 9eccfe109b27 ("RDMA/cxgb4: Add support for iWARP Port Mapper user space service") Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb4/cm.c | 2 +- drivers/infiniband/hw/cxgb4/device.c | 17 ++++++++++------- drivers/infiniband/hw/cxgb4/iw_cxgb4.h | 2 +- 3 files changed, 12 insertions(+), 9 deletions(-) diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 6a93280250d1..768a0fb67dd6 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -3925,7 +3925,7 @@ int __init c4iw_cm_init(void) return 0; } -void __exit c4iw_cm_term(void) +void c4iw_cm_term(void) { WARN_ON(!list_empty(&timeout_list)); flush_workqueue(workq); diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c index 16b75de4b2de..7db82b24302b 100644 --- a/drivers/infiniband/hw/cxgb4/device.c +++ b/drivers/infiniband/hw/cxgb4/device.c @@ -730,7 +730,6 @@ static void c4iw_dealloc(struct uld_ctx *ctx) if (ctx->dev->rdev.oc_mw_kva) iounmap(ctx->dev->rdev.oc_mw_kva); ib_dealloc_device(&ctx->dev->ibdev); - iwpm_exit(RDMA_NL_C4IW); ctx->dev = NULL; } @@ -827,12 +826,6 @@ static struct c4iw_dev *c4iw_alloc(const struct cxgb4_lld_info *infop) setup_debugfs(devp); } - ret = iwpm_init(RDMA_NL_C4IW); - if (ret) { - pr_err("port mapper initialization failed with %d\n", ret); - ib_dealloc_device(&devp->ibdev); - return ERR_PTR(ret); - } return devp; } @@ -1333,6 +1326,15 @@ static int __init c4iw_init_module(void) pr_err("%s[%u]: Failed to add netlink callback\n" , __func__, __LINE__); + err = iwpm_init(RDMA_NL_C4IW); + if (err) { + pr_err("port mapper initialization failed with %d\n", err); + ibnl_remove_client(RDMA_NL_C4IW); + c4iw_cm_term(); + debugfs_remove_recursive(c4iw_debugfs_root); + return err; + } + cxgb4_register_uld(CXGB4_ULD_RDMA, &c4iw_uld_info); return 0; @@ -1350,6 +1352,7 @@ static void __exit c4iw_exit_module(void) } mutex_unlock(&dev_mutex); cxgb4_unregister_uld(CXGB4_ULD_RDMA); + iwpm_exit(RDMA_NL_C4IW); ibnl_remove_client(RDMA_NL_C4IW); c4iw_cm_term(); debugfs_remove_recursive(c4iw_debugfs_root); diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h index 125bc5d1e175..361fff7a0742 100644 --- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h +++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h @@ -908,7 +908,7 @@ int c4iw_destroy_ctrl_qp(struct c4iw_rdev *rdev); int c4iw_register_device(struct c4iw_dev *dev); void c4iw_unregister_device(struct c4iw_dev *dev); int __init c4iw_cm_init(void); -void __exit c4iw_cm_term(void); +void c4iw_cm_term(void); void c4iw_release_dev_ucontext(struct c4iw_rdev *rdev, struct c4iw_dev_ucontext *uctx); void c4iw_init_dev_ucontext(struct c4iw_rdev *rdev, -- cgit v1.2.3 From 655fc39bf40331e13503bed85c9ed0278bc35575 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 9 Jul 2014 21:04:00 +0200 Subject: firewire: IEEE 1394 (FireWire) support should depend on HAS_DMA Commit b3d681a4fc108f9653bbb44e4f4e72db2b8a5734 ("firewire: Use COMPILE_TEST for build testing") added COMPILE_TEST as an alternative dependency for the purpose of build testing the firewire core. However, this bypasses all other implicit dependencies assumed by PCI, like HAS_DMA. If NO_DMA=y: drivers/built-in.o: In function `fw_iso_buffer_destroy': (.text+0x36a096): undefined reference to `dma_unmap_page' drivers/built-in.o: In function `fw_iso_buffer_map_dma': (.text+0x36a164): undefined reference to `dma_map_page' drivers/built-in.o: In function `fw_iso_buffer_map_dma': (.text+0x36a172): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `sbp2_send_management_orb': sbp2.c:(.text+0x36c6b4): undefined reference to `dma_map_single' sbp2.c:(.text+0x36c6c8): undefined reference to `dma_mapping_error' sbp2.c:(.text+0x36c772): undefined reference to `dma_map_single' sbp2.c:(.text+0x36c786): undefined reference to `dma_mapping_error' sbp2.c:(.text+0x36c854): undefined reference to `dma_unmap_single' sbp2.c:(.text+0x36c872): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `sbp2_map_scatterlist': sbp2.c:(.text+0x36ccbc): undefined reference to `scsi_dma_map' sbp2.c:(.text+0x36cd36): undefined reference to `dma_map_single' sbp2.c:(.text+0x36cd4e): undefined reference to `dma_mapping_error' sbp2.c:(.text+0x36cd84): undefined reference to `scsi_dma_unmap' drivers/built-in.o: In function `sbp2_unmap_scatterlist': sbp2.c:(.text+0x36cda6): undefined reference to `scsi_dma_unmap' sbp2.c:(.text+0x36cdc6): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `complete_command_orb': sbp2.c:(.text+0x36d6ac): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `sbp2_scsi_queuecommand': sbp2.c:(.text+0x36d8e0): undefined reference to `dma_map_single' sbp2.c:(.text+0x36d8f6): undefined reference to `dma_mapping_error' Add an explicit dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven Reviewed-by: Jean Delvare Signed-off-by: Stefan Richter --- drivers/firewire/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig index 4199849e3758..145974f9662b 100644 --- a/drivers/firewire/Kconfig +++ b/drivers/firewire/Kconfig @@ -1,4 +1,5 @@ menu "IEEE 1394 (FireWire) support" + depends on HAS_DMA depends on PCI || COMPILE_TEST # firewire-core does not depend on PCI but is # not useful without PCI controller driver -- cgit v1.2.3 From f563b89b182594f827b4100bd34f916339785a77 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sun, 13 Jul 2014 15:13:19 -0400 Subject: NFS: Don't reset pg_moreio in __nfs_pageio_add_request Once we've started sending unstable NFS writes, we do not want to clear pg_moreio, or we may end up sending the very last request as a stable write if the commit lists are still empty. Do, however, reset pg_moreio in the case where we end up having to recoalesce the write if an attempt to use pNFS failed. Signed-off-by: Trond Myklebust --- fs/nfs/pagelist.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c index 0aefc8102b6b..17fab89f6358 100644 --- a/fs/nfs/pagelist.c +++ b/fs/nfs/pagelist.c @@ -935,7 +935,6 @@ static int __nfs_pageio_add_request(struct nfs_pageio_descriptor *desc, nfs_pageio_doio(desc); if (desc->pg_error < 0) return 0; - desc->pg_moreio = 0; if (desc->pg_recoalesce) return 0; /* retry add_request for this subreq */ @@ -982,6 +981,7 @@ static int nfs_do_recoalesce(struct nfs_pageio_descriptor *desc) desc->pg_count = 0; desc->pg_base = 0; desc->pg_recoalesce = 0; + desc->pg_moreio = 0; while (!list_empty(&head)) { struct nfs_page *req; -- cgit v1.2.3 From 1795cd9b3a91d4b5473c97f491d63892442212ab Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 13 Jul 2014 14:04:33 -0700 Subject: Linux 3.16-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 216708499c38..f3c543df4697 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 16 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Shuffling Zombie Juror # *DOCUMENTATION* -- cgit v1.2.3 From 54c39e9ba3a93e3848ad8f9d082c39010cfc5e73 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 2 Jul 2014 15:16:32 +0200 Subject: mtd: nand: reduce the warning noise when the ECC is too weak In commit 67a9ad9b8a6f ("mtd: nand: Warn the user if the selected ECC strength is too weak"), a check was added to inform the user when the ECC used for a NAND device is weaker than the recommended ECC advertised by the NAND chip. However, the warning uses WARN_ON(), which has two undesirable side-effects: - It just prints to the kernel log the fact that there is a warning in this file, at this line, but it doesn't explain anything about the warning itself. - It dumps a stack trace which is very noisy, for something that the user is most likely not able to fix. If a certain ECC used by the kernel is weaker than the advertised one, it's most likely to make sure the kernel uses an ECC that is compatible with the one used by the bootloader, and changing the bootloader may not necessarily be easy. Therefore, normal users would not be able to do anything to fix this very noisy warning, and will have to suffer from it at every kernel boot. At least every time I see this stack trace in my kernel boot log, I wonder what new thing is broken, just to realize that it's once again this NAND ECC warning. Therefore, this commit turns: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at /home/thomas/projets/linux-2.6/drivers/mtd/nand/nand_base.c:4051 nand_scan_tail+0x538/0x780() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-rc3-dirty #4 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (warn_slowpath_common+0x6c/0x8c) [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null) from [] (nand_scan_tail+0x538/0x780) [] (nand_scan_tail) from [] (orion_nand_probe+0x224/0x2e4) [] (orion_nand_probe) from [] (platform_drv_probe+0x18/0x4c) [] (platform_drv_probe) from [] (really_probe+0x80/0x218) [] (really_probe) from [] (__driver_attach+0x98/0x9c) [] (__driver_attach) from [] (bus_for_each_dev+0x64/0x94) [] (bus_for_each_dev) from [] (bus_add_driver+0x144/0x1ec) [] (bus_add_driver) from [] (driver_register+0x78/0xf8) [] (driver_register) from [] (platform_driver_probe+0x20/0xb8) [] (platform_driver_probe) from [] (do_one_initcall+0x80/0x1d8) [] (do_one_initcall) from [] (kernel_init_freeable+0xf4/0x1b4) [] (kernel_init_freeable) from [] (kernel_init+0x8/0xec) [] (kernel_init) from [] (ret_from_fork+0x14/0x24) ---[ end trace 62f87d875aceccb4 ]--- Into the much shorter, and much more useful: nand: WARNING: MT29F2G08ABAEAWP: the ECC used on your system is too weak compared to the one required by the NAND chip Signed-off-by: Thomas Petazzoni Signed-off-by: Brian Norris --- drivers/mtd/nand/nand_base.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 41167e9e991e..4f3e80c68a26 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -4047,8 +4047,10 @@ int nand_scan_tail(struct mtd_info *mtd) ecc->layout->oobavail += ecc->layout->oobfree[i].length; mtd->oobavail = ecc->layout->oobavail; - /* ECC sanity check: warn noisily if it's too weak */ - WARN_ON(!nand_ecc_strength_good(mtd)); + /* ECC sanity check: warn if it's too weak */ + if (!nand_ecc_strength_good(mtd)) + pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n", + mtd->name); /* * Set the number of read / write steps for one page depending on ECC -- cgit v1.2.3 From 812c5fa82bae9f377f49000d7636c19a8b61735c Mon Sep 17 00:00:00 2001 From: Andrea Adami Date: Mon, 2 Jun 2014 23:38:35 +0200 Subject: mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR This family of chips was long ago supported by the pre-cfi driver. CFI code tested on several Zaurus SL-5500 (Collie) 2x16 on 32 bit bus. Function is_LH28F640BF() mimics is_m29ew() from cmdset_0002.c Buffer write fixes as seen in 2007 patch c/o Anti Sullin artecdesign.ee> http://comments.gmane.org/gmane.linux.ports.arm.kernel/36733 [Brian: this patch is semi-urgent, because the following patch switches to using CFI detection for a chip which (until now) is unsupported by the CFI driver 9218310 ARM: 8084/1: sa1100: collie: revert back to cfi_probe ] Signed-off-by: Andrea Adami Signed-off-by: Brian Norris --- drivers/mtd/chips/cfi_cmdset_0001.c | 43 +++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index e4ec355704a6..a7543ba3e190 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -52,6 +52,11 @@ /* Atmel chips */ #define AT49BV640D 0x02de #define AT49BV640DT 0x02db +/* Sharp chips */ +#define LH28F640BFHE_PTTL90 0x00b0 +#define LH28F640BFHE_PBTL90 0x00b1 +#define LH28F640BFHE_PTTL70A 0x00b2 +#define LH28F640BFHE_PBTL70A 0x00b3 static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); @@ -258,6 +263,36 @@ static void fixup_st_m28w320cb(struct mtd_info *mtd) (cfi->cfiq->EraseRegionInfo[1] & 0xffff0000) | 0x3e; }; +static int is_LH28F640BF(struct cfi_private *cfi) +{ + /* Sharp LH28F640BF Family */ + if (cfi->mfr == CFI_MFR_SHARP && ( + cfi->id == LH28F640BFHE_PTTL90 || cfi->id == LH28F640BFHE_PBTL90 || + cfi->id == LH28F640BFHE_PTTL70A || cfi->id == LH28F640BFHE_PBTL70A)) + return 1; + return 0; +} + +static void fixup_LH28F640BF(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_pri_intelext *extp = cfi->cmdset_priv; + + /* Reset the Partition Configuration Register on LH28F640BF + * to a single partition (PCR = 0x000): PCR is embedded into A0-A15. */ + if (is_LH28F640BF(cfi)) { + printk(KERN_INFO "Reset Partition Config. Register: 1 Partition of 4 planes\n"); + map_write(map, CMD(0x60), 0); + map_write(map, CMD(0x04), 0); + + /* We have set one single partition thus + * Simultaneous Operations are not allowed */ + printk(KERN_INFO "cfi_cmdset_0001: Simultaneous Operations disabled\n"); + extp->FeatureSupport &= ~512; + } +} + static void fixup_use_point(struct mtd_info *mtd) { struct map_info *map = mtd->priv; @@ -309,6 +344,8 @@ static struct cfi_fixup cfi_fixup_table[] = { { CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct }, { CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb }, { CFI_MFR_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock }, + { CFI_MFR_SHARP, CFI_ID_ANY, fixup_unlock_powerup_lock }, + { CFI_MFR_SHARP, CFI_ID_ANY, fixup_LH28F640BF }, { 0, 0, NULL } }; @@ -1649,6 +1686,12 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, initial_adr = adr; cmd_adr = adr & ~(wbufsize-1); + /* Sharp LH28F640BF chips need the first address for the + * Page Buffer Program command. See Table 5 of + * LH28F320BF, LH28F640BF, LH28F128BF Series (Appendix FUM00701) */ + if (is_LH28F640BF(cfi)) + cmd_adr = adr; + /* Let's determine this according to the interleave only once */ write_cmd = (cfi->cfiq->P_ID != P_ID_INTEL_PERFORMANCE) ? CMD(0xe8) : CMD(0xe9); -- cgit v1.2.3 From 5a680fad352525c3461ed1f7e3269d31a9128a07 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 11 Jul 2014 16:55:15 -0700 Subject: net: bcmgenet: fix RGMII_MODE_EN bit RGMII_MODE_EN bit was defined to 0, while it is actually 6. It was not much of a problem on older designs where this was a no-op, and the RGMII data-path would always be enabled, but newer GENET controllers need to explicitely enable their RGMII data-pad using this bit. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h index 0f117105fed1..e23c993b1362 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h @@ -331,9 +331,9 @@ struct bcmgenet_mib_counters { #define EXT_ENERGY_DET_MASK (1 << 12) #define EXT_RGMII_OOB_CTRL 0x0C -#define RGMII_MODE_EN (1 << 0) #define RGMII_LINK (1 << 4) #define OOB_DISABLE (1 << 5) +#define RGMII_MODE_EN (1 << 6) #define ID_MODE_DIS (1 << 16) #define EXT_GPHY_CTRL 0x1C -- cgit v1.2.3 From 845d6fcc2748855183295e2e6583468d0d0a911e Mon Sep 17 00:00:00 2001 From: françois romieu Date: Sat, 12 Jul 2014 02:54:27 +0200 Subject: MAINTAINERS: update r8169 maintainer Signed-off-by: Francois Romieu Signed-off-by: David S. Miller --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 23863ce06996..afc1c5aa476f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -156,7 +156,6 @@ F: drivers/net/hamradio/6pack.c 8169 10/100/1000 GIGABIT ETHERNET DRIVER M: Realtek linux nic maintainers -M: Francois Romieu L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/realtek/r8169.c -- cgit v1.2.3 From 6b89cddee051945a83cc67436ad1680ba7d9f766 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 9 Jul 2014 22:35:53 +0200 Subject: Revert "drm/i915: Don't set the 8to6 dither flag when not scaling" This reverts commit 773875bfb6737982903c42d1ee88cf60af80089c. It is very much needed and the lack of dithering has been reported by a large list of people with various gen2/3 hardware. Also, the original patch was complete non-sense since the WARNING backtraces in the references bugzilla are about gmch_pfit.lvds_border_bits mismatch, not at all about the dither bit. That one seems to work. Cc: Jiri Kosina Cc: Pavel Machek Cc: Hans de Bruin Cc: stable@vger.kernel.org Acked-by: Pavel Machek Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_lvds.c | 7 +++++++ drivers/gpu/drm/i915/intel_panel.c | 8 ++++---- 2 files changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 23126023aeba..5e5a72fca5fb 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -111,6 +111,13 @@ static void intel_lvds_get_config(struct intel_encoder *encoder, pipe_config->adjusted_mode.flags |= flags; + /* gen2/3 store dither state in pfit control, needs to match */ + if (INTEL_INFO(dev)->gen < 4) { + tmp = I915_READ(PFIT_CONTROL); + + pipe_config->gmch_pfit.control |= tmp & PANEL_8TO6_DITHER_ENABLE; + } + dotclock = pipe_config->port_clock; if (HAS_PCH_SPLIT(dev_priv->dev)) diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 628cd8938274..12b02fe1d0ae 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -361,16 +361,16 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc, pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) | PFIT_FILTER_FUZZY); - /* Make sure pre-965 set dither correctly for 18bpp panels. */ - if (INTEL_INFO(dev)->gen < 4 && pipe_config->pipe_bpp == 18) - pfit_control |= PANEL_8TO6_DITHER_ENABLE; - out: if ((pfit_control & PFIT_ENABLE) == 0) { pfit_control = 0; pfit_pgm_ratios = 0; } + /* Make sure pre-965 set dither correctly for 18bpp panels. */ + if (INTEL_INFO(dev)->gen < 4 && pipe_config->pipe_bpp == 18) + pfit_control |= PANEL_8TO6_DITHER_ENABLE; + pipe_config->gmch_pfit.control = pfit_control; pipe_config->gmch_pfit.pgm_ratios = pfit_pgm_ratios; pipe_config->gmch_pfit.lvds_border_bits = border; -- cgit v1.2.3 From 724cb06fa9b1e1ffd98188275543fdb3b8eaca4f Mon Sep 17 00:00:00 2001 From: Scot Doyle Date: Fri, 11 Jul 2014 22:16:30 +0000 Subject: drm/i915: Ignore VBT backlight presence check on HP Chromebook 14 commit c675949ec58ca50d5a3ae3c757892f1560f6e896 drm/i915: do not setup backlight if not available according to VBT caused a regression on the HP Chromebook 14 (with Celeron 2955U CPU), which has a misconfigured VBT. Apply quirk to ignore the VBT backlight presence check during backlight setup. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813 Signed-off-by: Scot Doyle Tested-by: Stefan Nagy Cc: Jani Nikula Cc: Daniel Vetter Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index e27e7804c0b9..82e7d57f0a8a 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -11673,6 +11673,9 @@ static struct intel_quirk intel_quirks[] = { /* Toshiba CB35 Chromebook (Celeron 2955U) */ { 0x0a06, 0x1179, 0x0a88, quirk_backlight_present }, + + /* HP Chromebook 14 (Celeron 2955U) */ + { 0x0a06, 0x103c, 0x21ed, quirk_backlight_present }, }; static void intel_init_quirks(struct drm_device *dev) -- cgit v1.2.3 From cd50065b3be83a705635550c04e368f2a4cc44d0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 14 Jul 2014 10:45:31 +0200 Subject: ALSA: hda - Revert stream assignment order for Intel controllers We got a regression report for 3.15.x kernels, and this turned out to be triggered by the fix for stream assignment order. On reporter's machine with Intel controller (8086:1e20) + VIA VT1802 codec, the first playback slot can't work with speaker outputs. But the original commit was actually a fix for AMD controllers where no proper GCAP value is returned, we shouldn't revert the whole commit. Instead, in this patch, a new flag is introduced to determine the stream assignment order, and follow the old behavior for Intel controllers. Fixes: dcb32ecd9a53 ('ALSA: hda - Do not assign streams in reverse order') Reported-and-tested-by: Steven Newbury Cc: [v3.15+] Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_controller.c | 3 ++- sound/pci/hda/hda_intel.c | 2 +- sound/pci/hda/hda_priv.h | 1 + 3 files changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c index 480bbddbd801..6df04d91c93c 100644 --- a/sound/pci/hda/hda_controller.c +++ b/sound/pci/hda/hda_controller.c @@ -193,7 +193,8 @@ azx_assign_device(struct azx *chip, struct snd_pcm_substream *substream) dsp_unlock(azx_dev); return azx_dev; } - if (!res) + if (!res || + (chip->driver_caps & AZX_DCAPS_REVERSE_ASSIGN)) res = azx_dev; } dsp_unlock(azx_dev); diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index b6b4e71a0b0b..d690c26a197c 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -227,7 +227,7 @@ enum { /* quirks for Intel PCH */ #define AZX_DCAPS_INTEL_PCH_NOPM \ (AZX_DCAPS_SCH_SNOOP | AZX_DCAPS_BUFSIZE | \ - AZX_DCAPS_COUNT_LPIB_DELAY) + AZX_DCAPS_COUNT_LPIB_DELAY | AZX_DCAPS_REVERSE_ASSIGN) #define AZX_DCAPS_INTEL_PCH \ (AZX_DCAPS_INTEL_PCH_NOPM | AZX_DCAPS_PM_RUNTIME) diff --git a/sound/pci/hda/hda_priv.h b/sound/pci/hda/hda_priv.h index 4a7cb01fa912..e9d1a5762a55 100644 --- a/sound/pci/hda/hda_priv.h +++ b/sound/pci/hda/hda_priv.h @@ -186,6 +186,7 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; #define AZX_DCAPS_BUFSIZE (1 << 21) /* no buffer size alignment */ #define AZX_DCAPS_ALIGN_BUFSIZE (1 << 22) /* buffer size alignment */ #define AZX_DCAPS_4K_BDLE_BOUNDARY (1 << 23) /* BDLE in 4k boundary */ +#define AZX_DCAPS_REVERSE_ASSIGN (1 << 24) /* Assign devices in reverse order */ #define AZX_DCAPS_COUNT_LPIB_DELAY (1 << 25) /* Take LPIB as delay */ #define AZX_DCAPS_PM_RUNTIME (1 << 26) /* runtime PM support */ #define AZX_DCAPS_I915_POWERWELL (1 << 27) /* HSW i915 powerwell support */ -- cgit v1.2.3 From d3cc7996473a7bdd33256029988ea690754e4e2a Mon Sep 17 00:00:00 2001 From: Amit Shah Date: Thu, 10 Jul 2014 15:42:34 +0530 Subject: hwrng: fetch randomness only after device init Commit d9e7972619334 "hwrng: add randomness to system from rng sources" added a call to rng_get_data() from the hwrng_register() function. However, some rng devices need initialization before data can be read from them. This commit makes the call to rng_get_data() depend on no init fn pointer being registered by the device. If an init function is registered, this call is made after device init. CC: Kees Cook CC: Jason Cooper CC: Herbert Xu CC: # For v3.15+ Signed-off-by: Amit Shah Reviewed-by: Jason Cooper Signed-off-by: Herbert Xu --- drivers/char/hw_random/core.c | 41 +++++++++++++++++++++++++++++++++-------- 1 file changed, 33 insertions(+), 8 deletions(-) diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c index 334601cc81cf..2a451b14b3cc 100644 --- a/drivers/char/hw_random/core.c +++ b/drivers/char/hw_random/core.c @@ -55,16 +55,35 @@ static DEFINE_MUTEX(rng_mutex); static int data_avail; static u8 *rng_buffer; +static inline int rng_get_data(struct hwrng *rng, u8 *buffer, size_t size, + int wait); + static size_t rng_buffer_size(void) { return SMP_CACHE_BYTES < 32 ? 32 : SMP_CACHE_BYTES; } +static void add_early_randomness(struct hwrng *rng) +{ + unsigned char bytes[16]; + int bytes_read; + + bytes_read = rng_get_data(rng, bytes, sizeof(bytes), 1); + if (bytes_read > 0) + add_device_randomness(bytes, bytes_read); +} + static inline int hwrng_init(struct hwrng *rng) { - if (!rng->init) - return 0; - return rng->init(rng); + if (rng->init) { + int ret; + + ret = rng->init(rng); + if (ret) + return ret; + } + add_early_randomness(rng); + return 0; } static inline void hwrng_cleanup(struct hwrng *rng) @@ -304,8 +323,6 @@ int hwrng_register(struct hwrng *rng) { int err = -EINVAL; struct hwrng *old_rng, *tmp; - unsigned char bytes[16]; - int bytes_read; if (rng->name == NULL || (rng->data_read == NULL && rng->read == NULL)) @@ -347,9 +364,17 @@ int hwrng_register(struct hwrng *rng) INIT_LIST_HEAD(&rng->list); list_add_tail(&rng->list, &rng_list); - bytes_read = rng_get_data(rng, bytes, sizeof(bytes), 1); - if (bytes_read > 0) - add_device_randomness(bytes, bytes_read); + if (old_rng && !rng->init) { + /* + * Use a new device's input to add some randomness to + * the system. If this rng device isn't going to be + * used right away, its init function hasn't been + * called yet; so only use the randomness from devices + * that don't need an init callback. + */ + add_early_randomness(rng); + } + out_unlock: mutex_unlock(&rng_mutex); out: -- cgit v1.2.3 From e052dbf554610e2104c5a7518c4d8374bed701bb Mon Sep 17 00:00:00 2001 From: Amit Shah Date: Thu, 10 Jul 2014 15:42:35 +0530 Subject: hwrng: virtio - ensure reads happen after successful probe The hwrng core asks for random data in the hwrng_register() call itself from commit d9e7972619. This doesn't play well with virtio -- the DRIVER_OK bit is only set by virtio core on a successful probe, and we're not yet out of our probe routine when this call is made. This causes the host to not acknowledge any requests we put in the virtqueue, and the insmod or kernel boot process just waits for data to arrive from the host, which never happens. CC: Kees Cook CC: Jason Cooper CC: Herbert Xu CC: # For v3.15+ Reviewed-by: Jason Cooper Signed-off-by: Amit Shah Signed-off-by: Herbert Xu --- drivers/char/hw_random/core.c | 6 ++++++ drivers/char/hw_random/virtio-rng.c | 10 ++++++++++ 2 files changed, 16 insertions(+) diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c index 2a451b14b3cc..c4419ea1ab07 100644 --- a/drivers/char/hw_random/core.c +++ b/drivers/char/hw_random/core.c @@ -68,6 +68,12 @@ static void add_early_randomness(struct hwrng *rng) unsigned char bytes[16]; int bytes_read; + /* + * Currently only virtio-rng cannot return data during device + * probe, and that's handled in virtio-rng.c itself. If there + * are more such devices, this call to rng_get_data can be + * made conditional here instead of doing it per-device. + */ bytes_read = rng_get_data(rng, bytes, sizeof(bytes), 1); if (bytes_read > 0) add_device_randomness(bytes, bytes_read); diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c index f3e71501de54..e9b15bc18b4d 100644 --- a/drivers/char/hw_random/virtio-rng.c +++ b/drivers/char/hw_random/virtio-rng.c @@ -38,6 +38,8 @@ struct virtrng_info { int index; }; +static bool probe_done; + static void random_recv_done(struct virtqueue *vq) { struct virtrng_info *vi = vq->vdev->priv; @@ -67,6 +69,13 @@ static int virtio_read(struct hwrng *rng, void *buf, size_t size, bool wait) int ret; struct virtrng_info *vi = (struct virtrng_info *)rng->priv; + /* + * Don't ask host for data till we're setup. This call can + * happen during hwrng_register(), after commit d9e7972619. + */ + if (unlikely(!probe_done)) + return 0; + if (!vi->busy) { vi->busy = true; init_completion(&vi->have_data); @@ -137,6 +146,7 @@ static int probe_common(struct virtio_device *vdev) return err; } + probe_done = true; return 0; } -- cgit v1.2.3 From 27f1b36326bc8b6911e7052bc4b80a10234f0ec5 Mon Sep 17 00:00:00 2001 From: Maxim Patlasov Date: Thu, 10 Jul 2014 15:32:43 +0400 Subject: fuse: release temporary page if fuse_writepage_locked() failed tmp_page to be freed if fuse_write_file_get() returns NULL. Signed-off-by: Maxim Patlasov Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 96d513e01a5d..35b6f31ecc38 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1722,7 +1722,7 @@ static int fuse_writepage_locked(struct page *page) error = -EIO; req->ff = fuse_write_file_get(fc, fi); if (!req->ff) - goto err_free; + goto err_nofile; fuse_write_fill(req, req->ff, page_offset(page), 0); @@ -1750,6 +1750,8 @@ static int fuse_writepage_locked(struct page *page) return 0; +err_nofile: + __free_page(tmp_page); err_free: fuse_request_free(req); err: -- cgit v1.2.3 From f2b3455e47c72bef80fe584adb9bb9bc5afdd99c Mon Sep 17 00:00:00 2001 From: Fabian Frederick Date: Mon, 23 Jun 2014 18:35:15 +0200 Subject: fuse: replace count*size kzalloc by kcalloc kcalloc manages count*sizeof overflow. Signed-off-by: Fabian Frederick Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 35b6f31ecc38..1570dad1915d 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1992,8 +1992,8 @@ static int fuse_writepages(struct address_space *mapping, data.ff = NULL; err = -ENOMEM; - data.orig_pages = kzalloc(sizeof(struct page *) * - FUSE_MAX_PAGES_PER_REQ, + data.orig_pages = kcalloc(FUSE_MAX_PAGES_PER_REQ, + sizeof(struct page *), GFP_NOFS); if (!data.orig_pages) goto out; -- cgit v1.2.3 From 263782c1c95bbddbb022dc092fd89a36bb8d5577 Mon Sep 17 00:00:00 2001 From: Benjamin LaHaise Date: Mon, 14 Jul 2014 12:49:26 -0400 Subject: aio: protect reqs_available updates from changes in interrupt handlers As of commit f8567a3845ac05bb28f3c1b478ef752762bd39ef it is now possible to have put_reqs_available() called from irq context. While put_reqs_available() is per cpu, it did not protect itself from interrupts on the same CPU. This lead to aio_complete() corrupting the available io requests count when run under a heavy O_DIRECT workloads as reported by Robert Elliott. Fix this by disabling irq updates around the per cpu batch updates of reqs_available. Many thanks to Robert and folks for testing and tracking this down. Reported-by: Robert Elliot Tested-by: Robert Elliot Signed-off-by: Benjamin LaHaise Cc: Jens Axboe , Christoph Hellwig Cc: stable@vger.kenel.org --- fs/aio.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/aio.c b/fs/aio.c index 955947ef3e02..1c9c5f0a9e2b 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -830,16 +830,20 @@ void exit_aio(struct mm_struct *mm) static void put_reqs_available(struct kioctx *ctx, unsigned nr) { struct kioctx_cpu *kcpu; + unsigned long flags; preempt_disable(); kcpu = this_cpu_ptr(ctx->cpu); + local_irq_save(flags); kcpu->reqs_available += nr; + while (kcpu->reqs_available >= ctx->req_batch * 2) { kcpu->reqs_available -= ctx->req_batch; atomic_add(ctx->req_batch, &ctx->reqs_available); } + local_irq_restore(flags); preempt_enable(); } @@ -847,10 +851,12 @@ static bool get_reqs_available(struct kioctx *ctx) { struct kioctx_cpu *kcpu; bool ret = false; + unsigned long flags; preempt_disable(); kcpu = this_cpu_ptr(ctx->cpu); + local_irq_save(flags); if (!kcpu->reqs_available) { int old, avail = atomic_read(&ctx->reqs_available); @@ -869,6 +875,7 @@ static bool get_reqs_available(struct kioctx *ctx) ret = true; kcpu->reqs_available--; out: + local_irq_restore(flags); preempt_enable(); return ret; } -- cgit v1.2.3 From 9c8958bc24e241de2c0d4740e6dea861fe47daa5 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Mon, 14 Jul 2014 19:35:31 +0200 Subject: drm/i915: Track the primary plane correctly when reassigning planes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 98ec77397a5c68ce753dc283aaa6f4742328bcdd Author: Ville Syrjälä Date: Wed Apr 30 17:43:01 2014 +0300 drm/i915: Make primary_enabled match the actual hardware state introduced more accurate tracking of the primary plane and some checks. It missed the plane->pipe reassignement code for gen2/3 though, which the checks caught and resulted in WARNING backtraces. Since we only use this path if the plane is on and on the wrong pipe we can just always set the tracking bit to "enabled". Reported-and-tested-by: Paul Bolle Cc: Paul Bolle Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 82e7d57f0a8a..f0be855ddf45 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -11914,6 +11914,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc) * ... */ plane = crtc->plane; crtc->plane = !plane; + crtc->primary_enabled = true; dev_priv->display.crtc_disable(&crtc->base); crtc->plane = plane; -- cgit v1.2.3 From ee14b644daaa58afe1e91bb9ebd9cf1b18d1f5fa Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 9 Jul 2014 09:18:59 +0800 Subject: hwmon: (da9052) Don't use dash in the name attribute Dashes are not allowed in hwmon name attributes. Use "da9052" instead of "da9052-hwmon". Signed-off-by: Axel Lin Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck --- drivers/hwmon/da9052-hwmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/da9052-hwmon.c b/drivers/hwmon/da9052-hwmon.c index afd31042b452..d14ab3c45daa 100644 --- a/drivers/hwmon/da9052-hwmon.c +++ b/drivers/hwmon/da9052-hwmon.c @@ -194,7 +194,7 @@ static ssize_t da9052_hwmon_show_name(struct device *dev, struct device_attribute *devattr, char *buf) { - return sprintf(buf, "da9052-hwmon\n"); + return sprintf(buf, "da9052\n"); } static ssize_t show_label(struct device *dev, -- cgit v1.2.3 From 6b00f440dd678d786389a7100a2e03fe44478431 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 9 Jul 2014 09:22:54 +0800 Subject: hwmon: (da9055) Don't use dash in the name attribute Dashes are not allowed in hwmon name attributes. Use "da9055" instead of "da9055-hwmon". Signed-off-by: Axel Lin Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck --- drivers/hwmon/da9055-hwmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/da9055-hwmon.c b/drivers/hwmon/da9055-hwmon.c index 73b3865f1207..35eb7738d711 100644 --- a/drivers/hwmon/da9055-hwmon.c +++ b/drivers/hwmon/da9055-hwmon.c @@ -204,7 +204,7 @@ static ssize_t da9055_hwmon_show_name(struct device *dev, struct device_attribute *devattr, char *buf) { - return sprintf(buf, "da9055-hwmon\n"); + return sprintf(buf, "da9055\n"); } static ssize_t show_label(struct device *dev, -- cgit v1.2.3 From 2843768b701971ab10e62c77d5c75ad7c306f1bd Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 14 Jul 2014 19:35:45 +0200 Subject: Revert "ACPI / video: change acpi-video brightness_switch_enabled default to 0" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 886129a8eebeb (ACPI / video: change acpi-video brightness_switch_enabled default to 0) as it is reported to cause problems to happen. Fixes: 886129a8eebeb (ACPI / video: change acpi-video brightness_switch_enabled default to 0) Link: http://marc.info/?l=linux-acpi&m=140534286826819&w=2 Reported by: Bjørn Mork Signed-off-by: Rafael J. Wysocki --- Documentation/kernel-parameters.txt | 2 +- drivers/acpi/video.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c1b9aa8c5a52..e332e718cad6 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3526,7 +3526,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. the allocated input device; If set to 0, video driver will only send out the event without touching backlight brightness level. - default: 0 + default: 1 virtio_mmio.device= [VMMIO] Memory mapped virtio (platform) device. diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 071c1dfb93f3..29649c194886 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -68,7 +68,7 @@ MODULE_AUTHOR("Bruno Ducrot"); MODULE_DESCRIPTION("ACPI Video Driver"); MODULE_LICENSE("GPL"); -static bool brightness_switch_enabled; +static bool brightness_switch_enabled = 1; module_param(brightness_switch_enabled, bool, 0644); /* -- cgit v1.2.3 From 2448e3493cb3874baa90725c87869455ebf11cd2 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 11 Jul 2014 21:06:38 +0200 Subject: tracing: instance_rmdir() leaks ftrace_event_file->filter instance_rmdir() path destroys the event files but forgets to free file->filter. Change remove_event_file_dir() to free_event_filter(). Link: http://lkml.kernel.org/p/20140711190638.GA19517@redhat.com Cc: Masami Hiramatsu Cc: Namhyung Kim Cc: Srikar Dronamraju Cc: Tom Zanussi Cc: "zhangwei(Jovi)" Cc: stable@vger.kernel.org # 3.11+ Fixes: f6a84bdc75b5 "tracing: Introduce remove_event_file_dir()" Signed-off-by: Oleg Nesterov Signed-off-by: Steven Rostedt --- kernel/trace/trace_events.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c index f99e0b3bca8c..2de53628689f 100644 --- a/kernel/trace/trace_events.c +++ b/kernel/trace/trace_events.c @@ -470,6 +470,7 @@ static void remove_event_file_dir(struct ftrace_event_file *file) list_del(&file->list); remove_subsystem(file->system); + free_event_filter(file->filter); kmem_cache_free(file_cachep, file); } -- cgit v1.2.3 From 8762e5092828c4dc0f49da5a47a644c670df77f3 Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Wed, 9 Jul 2014 13:18:18 -0400 Subject: x86/espfix/xen: Fix allocation of pages for paravirt page tables init_espfix_ap() is currently off by one level when informing hypervisor that allocated pages will be used for ministacks' page tables. The most immediate effect of this on a PV guest is that if 'stack_page = __get_free_page()' returns a non-zeroed-out page the hypervisor will refuse to use it for a page table (which it shouldn't be anyway). This will result in warnings by both Xen and Linux. More importantly, a subsequent write to that page (again, by a PV guest) is likely to result in fatal page fault. Signed-off-by: Boris Ostrovsky Link: http://lkml.kernel.org/r/1404926298-5565-1-git-send-email-boris.ostrovsky@oracle.com Reviewed-by: Konrad Rzeszutek Wilk Signed-off-by: H. Peter Anvin Cc: --- arch/x86/kernel/espfix_64.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/espfix_64.c b/arch/x86/kernel/espfix_64.c index 6afbb16e9b79..94d857fb1033 100644 --- a/arch/x86/kernel/espfix_64.c +++ b/arch/x86/kernel/espfix_64.c @@ -175,7 +175,7 @@ void init_espfix_ap(void) if (!pud_present(pud)) { pmd_p = (pmd_t *)__get_free_page(PGALLOC_GFP); pud = __pud(__pa(pmd_p) | (PGTABLE_PROT & ptemask)); - paravirt_alloc_pud(&init_mm, __pa(pmd_p) >> PAGE_SHIFT); + paravirt_alloc_pmd(&init_mm, __pa(pmd_p) >> PAGE_SHIFT); for (n = 0; n < ESPFIX_PUD_CLONES; n++) set_pud(&pud_p[n], pud); } @@ -185,7 +185,7 @@ void init_espfix_ap(void) if (!pmd_present(pmd)) { pte_p = (pte_t *)__get_free_page(PGALLOC_GFP); pmd = __pmd(__pa(pte_p) | (PGTABLE_PROT & ptemask)); - paravirt_alloc_pmd(&init_mm, __pa(pte_p) >> PAGE_SHIFT); + paravirt_alloc_pte(&init_mm, __pa(pte_p) >> PAGE_SHIFT); for (n = 0; n < ESPFIX_PMD_CLONES; n++) set_pmd(&pmd_p[n], pmd); } @@ -193,7 +193,6 @@ void init_espfix_ap(void) pte_p = pte_offset_kernel(&pmd, addr); stack_page = (void *)__get_free_page(GFP_KERNEL); pte = __pte(__pa(stack_page) | (__PAGE_KERNEL_RO & ptemask)); - paravirt_alloc_pte(&init_mm, __pa(stack_page) >> PAGE_SHIFT); for (n = 0; n < ESPFIX_PTE_CLONES; n++) set_pte(&pte_p[n*PTE_STRIDE], pte); -- cgit v1.2.3 From aa182e64f16fc29a4984c2d79191b161888bbd9b Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 15 Jul 2014 07:08:10 +1000 Subject: Revert "xfs: block allocation work needs to be kswapd aware" This reverts commit 1f6d64829db78a7e1d63e15c9f48f0a5d2b5a679. This commit resulted in regressions in performance in low memory situations where kswapd was doing writeback of delayed allocation blocks. It resulted in significant parallelism of the kswapd work and with the special kswapd flags meant that hundreds of active allocation could dip into kswapd specific memory reserves and avoid being throttled. This cause a large amount of performance variation, as well as random OOM-killer invocations that didn't previously exist. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Dave Chinner --- fs/xfs/xfs_bmap_util.c | 16 +++------------- fs/xfs/xfs_bmap_util.h | 13 ++++++------- 2 files changed, 9 insertions(+), 20 deletions(-) diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c index 703b3ec1796c..057f671811d6 100644 --- a/fs/xfs/xfs_bmap_util.c +++ b/fs/xfs/xfs_bmap_util.c @@ -258,23 +258,14 @@ xfs_bmapi_allocate_worker( struct xfs_bmalloca *args = container_of(work, struct xfs_bmalloca, work); unsigned long pflags; - unsigned long new_pflags = PF_FSTRANS; - /* - * we are in a transaction context here, but may also be doing work - * in kswapd context, and hence we may need to inherit that state - * temporarily to ensure that we don't block waiting for memory reclaim - * in any way. - */ - if (args->kswapd) - new_pflags |= PF_MEMALLOC | PF_SWAPWRITE | PF_KSWAPD; - - current_set_flags_nested(&pflags, new_pflags); + /* we are in a transaction context here */ + current_set_flags_nested(&pflags, PF_FSTRANS); args->result = __xfs_bmapi_allocate(args); complete(args->done); - current_restore_flags_nested(&pflags, new_pflags); + current_restore_flags_nested(&pflags, PF_FSTRANS); } /* @@ -293,7 +284,6 @@ xfs_bmapi_allocate( args->done = &done; - args->kswapd = current_is_kswapd(); INIT_WORK_ONSTACK(&args->work, xfs_bmapi_allocate_worker); queue_work(xfs_alloc_wq, &args->work); wait_for_completion(&done); diff --git a/fs/xfs/xfs_bmap_util.h b/fs/xfs/xfs_bmap_util.h index 075f72232a64..935ed2b24edf 100644 --- a/fs/xfs/xfs_bmap_util.h +++ b/fs/xfs/xfs_bmap_util.h @@ -50,13 +50,12 @@ struct xfs_bmalloca { xfs_extlen_t total; /* total blocks needed for xaction */ xfs_extlen_t minlen; /* minimum allocation size (blocks) */ xfs_extlen_t minleft; /* amount must be left after alloc */ - bool eof; /* set if allocating past last extent */ - bool wasdel; /* replacing a delayed allocation */ - bool userdata;/* set if is user data */ - bool aeof; /* allocated space at eof */ - bool conv; /* overwriting unwritten extents */ - bool stack_switch; - bool kswapd; /* allocation in kswapd context */ + char eof; /* set if allocating past last extent */ + char wasdel; /* replacing a delayed allocation */ + char userdata;/* set if is user data */ + char aeof; /* allocated space at eof */ + char conv; /* overwriting unwritten extents */ + char stack_switch; int flags; struct completion *done; struct work_struct work; -- cgit v1.2.3 From cf11da9c5d374962913ca5ba0ce0886b58286224 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 15 Jul 2014 07:08:24 +1000 Subject: xfs: refine the allocation stack switch The allocation stack switch at xfs_bmapi_allocate() has served it's purpose, but is no longer a sufficient solution to the stack usage problem we have in the XFS allocation path. Whilst the kernel stack size is now 16k, that is not a valid reason for undoing all our "keep stack usage down" modifications. What it does allow us to do is have the freedom to refine and perfect the modifications knowing that if we get it wrong it won't blow up in our faces - we have a safety net now. This is important because we still have the issue of older kernels having smaller stacks and that they are still supported and are demonstrating a wide range of different stack overflows. Red Hat has several open bugs for allocation based stack overflows from directory modifications and direct IO block allocation and these problems still need to be solved. If we can solve them upstream, then distro's won't need to bake their own unique solutions. To that end, I've observed that every allocation based stack overflow report has had a specific characteristic - it has happened during or directly after a bmap btree block split. That event requires a new block to be allocated to the tree, and so we effectively stack one allocation stack on top of another, and that's when we get into trouble. A further observation is that bmap btree block splits are much rarer than writeback allocation - over a range of different workloads I've observed the ratio of bmap btree inserts to splits ranges from 100:1 (xfstests run) to 10000:1 (local VM image server with sparse files that range in the hundreds of thousands to millions of extents). Either way, bmap btree split events are much, much rarer than allocation events. Finally, we have to move the kswapd state to the allocation workqueue work when allocation is done on behalf of kswapd. This is proving to cause significant perturbation in performance under memory pressure and appears to be generating allocation deadlock warnings under some workloads, so avoiding the use of a workqueue for the majority of kswapd writeback allocation will minimise the impact of such behaviour. Hence it makes sense to move the stack switch to xfs_btree_split() and only do it for bmap btree splits. Stack switches during allocation will be much rarer, so there won't be significant performacne overhead caused by switching stacks. The worse case stack from all allocation paths will be split, not just writeback. And the majority of memory allocations will be done in the correct context (e.g. kswapd) without causing additional latency, and so we simplify the memory reclaim interactions between processes, workqueues and kswapd. The worst stack I've been able to generate with this patch in place is 5600 bytes deep. It's very revealing because we exit XFS at: 37) 1768 64 kmem_cache_alloc+0x13b/0x170 about 1800 bytes of stack consumed, and the remaining 3800 bytes (and 36 functions) is memory reclaim, swap and the IO stack. And this occurs in the inode allocation from an open(O_CREAT) syscall, not writeback. The amount of stack being used is much less than I've previously be able to generate - fs_mark testing has been able to generate stack usage of around 7k without too much trouble; with this patch it's only just getting to 5.5k. This is primarily because the metadata allocation paths (e.g. directory blocks) are no longer causing double splits on the same stack, and hence now stack tracing is showing swapping being the worst stack consumer rather than XFS. Performance of fs_mark inode create workloads is unchanged. Performance of fs_mark async fsync workloads is consistently good with context switches reduced by around 150,000/s (30%). Performance of dbench, streaming IO and postmark is unchanged. Allocation deadlock warnings have not been seen on the workloads that generated them since adding this patch. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Dave Chinner --- fs/xfs/xfs_bmap.c | 7 ++--- fs/xfs/xfs_bmap.h | 4 +-- fs/xfs/xfs_bmap_util.c | 43 -------------------------- fs/xfs/xfs_bmap_util.h | 13 +++----- fs/xfs/xfs_btree.c | 82 +++++++++++++++++++++++++++++++++++++++++++++++++- fs/xfs/xfs_iomap.c | 3 +- 6 files changed, 90 insertions(+), 62 deletions(-) diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index 96175df211b1..75c3fe5f3d9d 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -4298,8 +4298,8 @@ xfs_bmapi_delay( } -int -__xfs_bmapi_allocate( +static int +xfs_bmapi_allocate( struct xfs_bmalloca *bma) { struct xfs_mount *mp = bma->ip->i_mount; @@ -4578,9 +4578,6 @@ xfs_bmapi_write( bma.flist = flist; bma.firstblock = firstblock; - if (flags & XFS_BMAPI_STACK_SWITCH) - bma.stack_switch = 1; - while (bno < end && n < *nmap) { inhole = eof || bma.got.br_startoff > bno; wasdelay = !inhole && isnullstartblock(bma.got.br_startblock); diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h index 38ba36e9b2f0..b879ca56a64c 100644 --- a/fs/xfs/xfs_bmap.h +++ b/fs/xfs/xfs_bmap.h @@ -77,7 +77,6 @@ typedef struct xfs_bmap_free * from written to unwritten, otherwise convert from unwritten to written. */ #define XFS_BMAPI_CONVERT 0x040 -#define XFS_BMAPI_STACK_SWITCH 0x080 #define XFS_BMAPI_FLAGS \ { XFS_BMAPI_ENTIRE, "ENTIRE" }, \ @@ -86,8 +85,7 @@ typedef struct xfs_bmap_free { XFS_BMAPI_PREALLOC, "PREALLOC" }, \ { XFS_BMAPI_IGSTATE, "IGSTATE" }, \ { XFS_BMAPI_CONTIG, "CONTIG" }, \ - { XFS_BMAPI_CONVERT, "CONVERT" }, \ - { XFS_BMAPI_STACK_SWITCH, "STACK_SWITCH" } + { XFS_BMAPI_CONVERT, "CONVERT" } static inline int xfs_bmapi_aflag(int w) diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c index 057f671811d6..64731ef3324d 100644 --- a/fs/xfs/xfs_bmap_util.c +++ b/fs/xfs/xfs_bmap_util.c @@ -248,49 +248,6 @@ xfs_bmap_rtalloc( return 0; } -/* - * Stack switching interfaces for allocation - */ -static void -xfs_bmapi_allocate_worker( - struct work_struct *work) -{ - struct xfs_bmalloca *args = container_of(work, - struct xfs_bmalloca, work); - unsigned long pflags; - - /* we are in a transaction context here */ - current_set_flags_nested(&pflags, PF_FSTRANS); - - args->result = __xfs_bmapi_allocate(args); - complete(args->done); - - current_restore_flags_nested(&pflags, PF_FSTRANS); -} - -/* - * Some allocation requests often come in with little stack to work on. Push - * them off to a worker thread so there is lots of stack to use. Otherwise just - * call directly to avoid the context switch overhead here. - */ -int -xfs_bmapi_allocate( - struct xfs_bmalloca *args) -{ - DECLARE_COMPLETION_ONSTACK(done); - - if (!args->stack_switch) - return __xfs_bmapi_allocate(args); - - - args->done = &done; - INIT_WORK_ONSTACK(&args->work, xfs_bmapi_allocate_worker); - queue_work(xfs_alloc_wq, &args->work); - wait_for_completion(&done); - destroy_work_on_stack(&args->work); - return args->result; -} - /* * Check if the endoff is outside the last extent. If so the caller will grow * the allocation to a stripe unit boundary. All offsets are considered outside diff --git a/fs/xfs/xfs_bmap_util.h b/fs/xfs/xfs_bmap_util.h index 935ed2b24edf..2fdb72d2c908 100644 --- a/fs/xfs/xfs_bmap_util.h +++ b/fs/xfs/xfs_bmap_util.h @@ -50,12 +50,11 @@ struct xfs_bmalloca { xfs_extlen_t total; /* total blocks needed for xaction */ xfs_extlen_t minlen; /* minimum allocation size (blocks) */ xfs_extlen_t minleft; /* amount must be left after alloc */ - char eof; /* set if allocating past last extent */ - char wasdel; /* replacing a delayed allocation */ - char userdata;/* set if is user data */ - char aeof; /* allocated space at eof */ - char conv; /* overwriting unwritten extents */ - char stack_switch; + bool eof; /* set if allocating past last extent */ + bool wasdel; /* replacing a delayed allocation */ + bool userdata;/* set if is user data */ + bool aeof; /* allocated space at eof */ + bool conv; /* overwriting unwritten extents */ int flags; struct completion *done; struct work_struct work; @@ -65,8 +64,6 @@ struct xfs_bmalloca { int xfs_bmap_finish(struct xfs_trans **tp, struct xfs_bmap_free *flist, int *committed); int xfs_bmap_rtalloc(struct xfs_bmalloca *ap); -int xfs_bmapi_allocate(struct xfs_bmalloca *args); -int __xfs_bmapi_allocate(struct xfs_bmalloca *args); int xfs_bmap_eof(struct xfs_inode *ip, xfs_fileoff_t endoff, int whichfork, int *eof); int xfs_bmap_count_blocks(struct xfs_trans *tp, struct xfs_inode *ip, diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c index bf810c6baf2b..cf893bc1e373 100644 --- a/fs/xfs/xfs_btree.c +++ b/fs/xfs/xfs_btree.c @@ -33,6 +33,7 @@ #include "xfs_error.h" #include "xfs_trace.h" #include "xfs_cksum.h" +#include "xfs_alloc.h" /* * Cursor allocation zone. @@ -2323,7 +2324,7 @@ error1: * record (to be inserted into parent). */ STATIC int /* error */ -xfs_btree_split( +__xfs_btree_split( struct xfs_btree_cur *cur, int level, union xfs_btree_ptr *ptrp, @@ -2503,6 +2504,85 @@ error0: return error; } +struct xfs_btree_split_args { + struct xfs_btree_cur *cur; + int level; + union xfs_btree_ptr *ptrp; + union xfs_btree_key *key; + struct xfs_btree_cur **curp; + int *stat; /* success/failure */ + int result; + bool kswapd; /* allocation in kswapd context */ + struct completion *done; + struct work_struct work; +}; + +/* + * Stack switching interfaces for allocation + */ +static void +xfs_btree_split_worker( + struct work_struct *work) +{ + struct xfs_btree_split_args *args = container_of(work, + struct xfs_btree_split_args, work); + unsigned long pflags; + unsigned long new_pflags = PF_FSTRANS; + + /* + * we are in a transaction context here, but may also be doing work + * in kswapd context, and hence we may need to inherit that state + * temporarily to ensure that we don't block waiting for memory reclaim + * in any way. + */ + if (args->kswapd) + new_pflags |= PF_MEMALLOC | PF_SWAPWRITE | PF_KSWAPD; + + current_set_flags_nested(&pflags, new_pflags); + + args->result = __xfs_btree_split(args->cur, args->level, args->ptrp, + args->key, args->curp, args->stat); + complete(args->done); + + current_restore_flags_nested(&pflags, new_pflags); +} + +/* + * BMBT split requests often come in with little stack to work on. Push + * them off to a worker thread so there is lots of stack to use. For the other + * btree types, just call directly to avoid the context switch overhead here. + */ +STATIC int /* error */ +xfs_btree_split( + struct xfs_btree_cur *cur, + int level, + union xfs_btree_ptr *ptrp, + union xfs_btree_key *key, + struct xfs_btree_cur **curp, + int *stat) /* success/failure */ +{ + struct xfs_btree_split_args args; + DECLARE_COMPLETION_ONSTACK(done); + + if (cur->bc_btnum != XFS_BTNUM_BMAP) + return __xfs_btree_split(cur, level, ptrp, key, curp, stat); + + args.cur = cur; + args.level = level; + args.ptrp = ptrp; + args.key = key; + args.curp = curp; + args.stat = stat; + args.done = &done; + args.kswapd = current_is_kswapd(); + INIT_WORK_ONSTACK(&args.work, xfs_btree_split_worker); + queue_work(xfs_alloc_wq, &args.work); + wait_for_completion(&done); + destroy_work_on_stack(&args.work); + return args.result; +} + + /* * Copy the old inode root contents into a real block and make the * broot point to it. diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c index 6c5eb4c551e3..6d3ec2b6ee29 100644 --- a/fs/xfs/xfs_iomap.c +++ b/fs/xfs/xfs_iomap.c @@ -749,8 +749,7 @@ xfs_iomap_write_allocate( * pointer that the caller gave to us. */ error = xfs_bmapi_write(tp, ip, map_start_fsb, - count_fsb, - XFS_BMAPI_STACK_SWITCH, + count_fsb, 0, &first_block, 1, imap, &nimaps, &free_list); if (error) -- cgit v1.2.3 From c6930992948adf0f8fc1f6ff1da51c5002a2cf95 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 14 Jul 2014 11:04:39 +1000 Subject: Revert "drm/i915: reverse dp link param selection, prefer fast over wide again" This reverts commit 38aecea0ccbb909d635619cba22f1891e589b434. This breaks Haswell Thinkpad + Lenovo dock in SST mode with a HDMI monitor attached. Before this we can 1920x1200 mode, after this we only ever get 1024x768, and a lot of deferring. This didn't revert clean, but this should be fine. bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1117008 Cc: stable@vger.kernel.org # v3.15 Signed-off-by: Dave Airlie Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 075170d1844f..8a1a4fbc06ac 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -906,8 +906,8 @@ intel_dp_compute_config(struct intel_encoder *encoder, mode_rate = intel_dp_link_required(adjusted_mode->crtc_clock, bpp); - for (lane_count = min_lane_count; lane_count <= max_lane_count; lane_count <<= 1) { - for (clock = min_clock; clock <= max_clock; clock++) { + for (clock = min_clock; clock <= max_clock; clock++) { + for (lane_count = min_lane_count; lane_count <= max_lane_count; lane_count <<= 1) { link_clock = drm_dp_bw_code_to_link_rate(bws[clock]); link_avail = intel_dp_max_data_rate(link_clock, lane_count); -- cgit v1.2.3 From 8f2e5ae40ec193bc0a0ed99e95315c3eebca84ea Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Sat, 12 Jul 2014 20:30:35 +0200 Subject: net: sctp: fix information leaks in ulpevent layer While working on some other SCTP code, I noticed that some structures shared with user space are leaking uninitialized stack or heap buffer. In particular, struct sctp_sndrcvinfo has a 2 bytes hole between .sinfo_flags and .sinfo_ppid that remains unfilled by us in sctp_ulpevent_read_sndrcvinfo() when putting this into cmsg. But also struct sctp_remote_error contains a 2 bytes hole that we don't fill but place into a skb through skb_copy_expand() via sctp_ulpevent_make_remote_error(). Both structures are defined by the IETF in RFC6458: * Section 5.3.2. SCTP Header Information Structure: The sctp_sndrcvinfo structure is defined below: struct sctp_sndrcvinfo { uint16_t sinfo_stream; uint16_t sinfo_ssn; uint16_t sinfo_flags; <-- 2 bytes hole --> uint32_t sinfo_ppid; uint32_t sinfo_context; uint32_t sinfo_timetolive; uint32_t sinfo_tsn; uint32_t sinfo_cumtsn; sctp_assoc_t sinfo_assoc_id; }; * 6.1.3. SCTP_REMOTE_ERROR: A remote peer may send an Operation Error message to its peer. This message indicates a variety of error conditions on an association. The entire ERROR chunk as it appears on the wire is included in an SCTP_REMOTE_ERROR event. Please refer to the SCTP specification [RFC4960] and any extensions for a list of possible error formats. An SCTP error notification has the following format: struct sctp_remote_error { uint16_t sre_type; uint16_t sre_flags; uint32_t sre_length; uint16_t sre_error; <-- 2 bytes hole --> sctp_assoc_t sre_assoc_id; uint8_t sre_data[]; }; Fix this by setting both to 0 before filling them out. We also have other structures shared between user and kernel space in SCTP that contains holes (e.g. struct sctp_paddrthlds), but we copy that buffer over from user space first and thus don't need to care about it in that cases. While at it, we can also remove lengthy comments copied from the draft, instead, we update the comment with the correct RFC number where one can look it up. Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller --- net/sctp/ulpevent.c | 122 +++++++--------------------------------------------- 1 file changed, 15 insertions(+), 107 deletions(-) diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c index 85c64658bd0b..b6842fdb53d4 100644 --- a/net/sctp/ulpevent.c +++ b/net/sctp/ulpevent.c @@ -366,9 +366,10 @@ fail: * specification [SCTP] and any extensions for a list of possible * error formats. */ -struct sctp_ulpevent *sctp_ulpevent_make_remote_error( - const struct sctp_association *asoc, struct sctp_chunk *chunk, - __u16 flags, gfp_t gfp) +struct sctp_ulpevent * +sctp_ulpevent_make_remote_error(const struct sctp_association *asoc, + struct sctp_chunk *chunk, __u16 flags, + gfp_t gfp) { struct sctp_ulpevent *event; struct sctp_remote_error *sre; @@ -387,8 +388,7 @@ struct sctp_ulpevent *sctp_ulpevent_make_remote_error( /* Copy the skb to a new skb with room for us to prepend * notification with. */ - skb = skb_copy_expand(chunk->skb, sizeof(struct sctp_remote_error), - 0, gfp); + skb = skb_copy_expand(chunk->skb, sizeof(*sre), 0, gfp); /* Pull off the rest of the cause TLV from the chunk. */ skb_pull(chunk->skb, elen); @@ -399,62 +399,21 @@ struct sctp_ulpevent *sctp_ulpevent_make_remote_error( event = sctp_skb2event(skb); sctp_ulpevent_init(event, MSG_NOTIFICATION, skb->truesize); - sre = (struct sctp_remote_error *) - skb_push(skb, sizeof(struct sctp_remote_error)); + sre = (struct sctp_remote_error *) skb_push(skb, sizeof(*sre)); /* Trim the buffer to the right length. */ - skb_trim(skb, sizeof(struct sctp_remote_error) + elen); + skb_trim(skb, sizeof(*sre) + elen); - /* Socket Extensions for SCTP - * 5.3.1.3 SCTP_REMOTE_ERROR - * - * sre_type: - * It should be SCTP_REMOTE_ERROR. - */ + /* RFC6458, Section 6.1.3. SCTP_REMOTE_ERROR */ + memset(sre, 0, sizeof(*sre)); sre->sre_type = SCTP_REMOTE_ERROR; - - /* - * Socket Extensions for SCTP - * 5.3.1.3 SCTP_REMOTE_ERROR - * - * sre_flags: 16 bits (unsigned integer) - * Currently unused. - */ sre->sre_flags = 0; - - /* Socket Extensions for SCTP - * 5.3.1.3 SCTP_REMOTE_ERROR - * - * sre_length: sizeof (__u32) - * - * This field is the total length of the notification data, - * including the notification header. - */ sre->sre_length = skb->len; - - /* Socket Extensions for SCTP - * 5.3.1.3 SCTP_REMOTE_ERROR - * - * sre_error: 16 bits (unsigned integer) - * This value represents one of the Operational Error causes defined in - * the SCTP specification, in network byte order. - */ sre->sre_error = cause; - - /* Socket Extensions for SCTP - * 5.3.1.3 SCTP_REMOTE_ERROR - * - * sre_assoc_id: sizeof (sctp_assoc_t) - * - * The association id field, holds the identifier for the association. - * All notifications for a given association have the same association - * identifier. For TCP style socket, this field is ignored. - */ sctp_ulpevent_set_owner(event, asoc); sre->sre_assoc_id = sctp_assoc2id(asoc); return event; - fail: return NULL; } @@ -899,7 +858,9 @@ __u16 sctp_ulpevent_get_notification_type(const struct sctp_ulpevent *event) return notification->sn_header.sn_type; } -/* Copy out the sndrcvinfo into a msghdr. */ +/* RFC6458, Section 5.3.2. SCTP Header Information Structure + * (SCTP_SNDRCV, DEPRECATED) + */ void sctp_ulpevent_read_sndrcvinfo(const struct sctp_ulpevent *event, struct msghdr *msghdr) { @@ -908,74 +869,21 @@ void sctp_ulpevent_read_sndrcvinfo(const struct sctp_ulpevent *event, if (sctp_ulpevent_is_notification(event)) return; - /* Sockets API Extensions for SCTP - * Section 5.2.2 SCTP Header Information Structure (SCTP_SNDRCV) - * - * sinfo_stream: 16 bits (unsigned integer) - * - * For recvmsg() the SCTP stack places the message's stream number in - * this value. - */ + memset(&sinfo, 0, sizeof(sinfo)); sinfo.sinfo_stream = event->stream; - /* sinfo_ssn: 16 bits (unsigned integer) - * - * For recvmsg() this value contains the stream sequence number that - * the remote endpoint placed in the DATA chunk. For fragmented - * messages this is the same number for all deliveries of the message - * (if more than one recvmsg() is needed to read the message). - */ sinfo.sinfo_ssn = event->ssn; - /* sinfo_ppid: 32 bits (unsigned integer) - * - * In recvmsg() this value is - * the same information that was passed by the upper layer in the peer - * application. Please note that byte order issues are NOT accounted - * for and this information is passed opaquely by the SCTP stack from - * one end to the other. - */ sinfo.sinfo_ppid = event->ppid; - /* sinfo_flags: 16 bits (unsigned integer) - * - * This field may contain any of the following flags and is composed of - * a bitwise OR of these values. - * - * recvmsg() flags: - * - * SCTP_UNORDERED - This flag is present when the message was sent - * non-ordered. - */ sinfo.sinfo_flags = event->flags; - /* sinfo_tsn: 32 bit (unsigned integer) - * - * For the receiving side, this field holds a TSN that was - * assigned to one of the SCTP Data Chunks. - */ sinfo.sinfo_tsn = event->tsn; - /* sinfo_cumtsn: 32 bit (unsigned integer) - * - * This field will hold the current cumulative TSN as - * known by the underlying SCTP layer. Note this field is - * ignored when sending and only valid for a receive - * operation when sinfo_flags are set to SCTP_UNORDERED. - */ sinfo.sinfo_cumtsn = event->cumtsn; - /* sinfo_assoc_id: sizeof (sctp_assoc_t) - * - * The association handle field, sinfo_assoc_id, holds the identifier - * for the association announced in the COMMUNICATION_UP notification. - * All notifications for a given association have the same identifier. - * Ignored for one-to-one style sockets. - */ sinfo.sinfo_assoc_id = sctp_assoc2id(event->asoc); - - /* context value that is set via SCTP_CONTEXT socket option. */ + /* Context value that is set via SCTP_CONTEXT socket option. */ sinfo.sinfo_context = event->asoc->default_rcv_context; - /* These fields are not used while receiving. */ sinfo.sinfo_timetolive = 0; put_cmsg(msghdr, IPPROTO_SCTP, SCTP_SNDRCV, - sizeof(struct sctp_sndrcvinfo), (void *)&sinfo); + sizeof(sinfo), &sinfo); } /* Do accounting for bytes received and hold a reference to the association -- cgit v1.2.3 From 03e01349c654fbdea80d3d9b4ab599244eb55bb7 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 15 Jul 2014 07:28:41 +1000 Subject: xfs: null unused quota inodes when quota is on When quota is on, it is expected that unused quota inodes have a value of NULLFSINO. The changes to support a separate project quota in 3.12 broken this rule for non-project quota inode enabled filesystem, as the code now refuses to write the group quota inode if neither group or project quotas are enabled. This regression was introduced by commit d892d58 ("xfs: Start using pquotaino from the superblock"). In this case, we should be writing NULLFSINO rather than nothing to ensure that we leave the group quota inode in a valid state while quotas are enabled. Failure to do so doesn't cause a current kernel to break - the separate project quota inodes introduced translation code to always treat a zero inode as NULLFSINO. This was introduced by commit 0102629 ("xfs: Initialize all quota inodes to be NULLFSINO") with is also in 3.12 but older kernels do not do this and hence taking a filesystem back to an older kernel can result in quotas failing initialisation at mount time. When that happens, we see this in dmesg: [ 1649.215390] XFS (sdb): Mounting Filesystem [ 1649.316894] XFS (sdb): Failed to initialize disk quotas. [ 1649.316902] XFS (sdb): Ending clean mount By ensuring that we write NULLFSINO to quota inodes that aren't active, we avoid this problem. We have to be really careful when determining if the quota inodes are active or not, because we don't want to write a NULLFSINO if the quota inodes are active and we simply aren't updating them. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Dave Chinner --- fs/xfs/xfs_sb.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) diff --git a/fs/xfs/xfs_sb.c b/fs/xfs/xfs_sb.c index c3453b11f563..7703fa6770ff 100644 --- a/fs/xfs/xfs_sb.c +++ b/fs/xfs/xfs_sb.c @@ -483,10 +483,16 @@ xfs_sb_quota_to_disk( } /* - * GQUOTINO and PQUOTINO cannot be used together in versions - * of superblock that do not have pquotino. from->sb_flags - * tells us which quota is active and should be copied to - * disk. + * GQUOTINO and PQUOTINO cannot be used together in versions of + * superblock that do not have pquotino. from->sb_flags tells us which + * quota is active and should be copied to disk. If neither are active, + * make sure we write NULLFSINO to the sb_gquotino field as a quota + * inode value of "0" is invalid when the XFS_SB_VERSION_QUOTA feature + * bit is set. + * + * Note that we don't need to handle the sb_uquotino or sb_pquotino here + * as they do not require any translation. Hence the main sb field loop + * will write them appropriately from the in-core superblock. */ if ((*fields & XFS_SB_GQUOTINO) && (from->sb_qflags & XFS_GQUOTA_ACCT)) @@ -494,6 +500,17 @@ xfs_sb_quota_to_disk( else if ((*fields & XFS_SB_PQUOTINO) && (from->sb_qflags & XFS_PQUOTA_ACCT)) to->sb_gquotino = cpu_to_be64(from->sb_pquotino); + else { + /* + * We can't rely on just the fields being logged to tell us + * that it is safe to write NULLFSINO - we should only do that + * if quotas are not actually enabled. Hence only write + * NULLFSINO if both in-core quota inodes are NULL. + */ + if (from->sb_gquotino == NULLFSINO && + from->sb_pquotino == NULLFSINO) + to->sb_gquotino = cpu_to_be64(NULLFSINO); + } *fields &= ~(XFS_SB_PQUOTINO | XFS_SB_GQUOTINO); } -- cgit v1.2.3 From 9ecf07a1d8f70f72ec99a0f102c8aa24609d84f4 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sat, 12 Jul 2014 22:36:44 +0200 Subject: neigh: sysctl - simplify address calculation of gc_* variables The code in neigh_sysctl_register() relies on a specific layout of struct neigh_table, namely that the 'gc_*' variables are directly following the 'parms' member in a specific order. The code, though, expresses this in the most ugly way. Get rid of the ugly casts and use the 'tbl' pointer to get a handle to the table. This way we can refer to the 'gc_*' variables directly. Similarly seen in the grsecurity patch, written by Brad Spengler. Signed-off-by: Mathias Krause Cc: Brad Spengler Signed-off-by: David S. Miller --- include/net/neighbour.h | 1 - net/core/neighbour.c | 9 +++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/include/net/neighbour.h b/include/net/neighbour.h index 7277caf3743d..47f425464f84 100644 --- a/include/net/neighbour.h +++ b/include/net/neighbour.h @@ -203,7 +203,6 @@ struct neigh_table { void (*proxy_redo)(struct sk_buff *skb); char *id; struct neigh_parms parms; - /* HACK. gc_* should follow parms without a gap! */ int gc_interval; int gc_thresh1; int gc_thresh2; diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 32d872eec7f5..559890b0f0a2 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -3059,11 +3059,12 @@ int neigh_sysctl_register(struct net_device *dev, struct neigh_parms *p, memset(&t->neigh_vars[NEIGH_VAR_GC_INTERVAL], 0, sizeof(t->neigh_vars[NEIGH_VAR_GC_INTERVAL])); } else { + struct neigh_table *tbl = p->tbl; dev_name_source = "default"; - t->neigh_vars[NEIGH_VAR_GC_INTERVAL].data = (int *)(p + 1); - t->neigh_vars[NEIGH_VAR_GC_THRESH1].data = (int *)(p + 1) + 1; - t->neigh_vars[NEIGH_VAR_GC_THRESH2].data = (int *)(p + 1) + 2; - t->neigh_vars[NEIGH_VAR_GC_THRESH3].data = (int *)(p + 1) + 3; + t->neigh_vars[NEIGH_VAR_GC_INTERVAL].data = &tbl->gc_interval; + t->neigh_vars[NEIGH_VAR_GC_THRESH1].data = &tbl->gc_thresh1; + t->neigh_vars[NEIGH_VAR_GC_THRESH2].data = &tbl->gc_thresh2; + t->neigh_vars[NEIGH_VAR_GC_THRESH3].data = &tbl->gc_thresh3; } if (handler) { -- cgit v1.2.3 From a8a3e41c67d24eb12f9ab9680cbb85e24fcd9711 Mon Sep 17 00:00:00 2001 From: Christoph Schulz Date: Sun, 13 Jul 2014 00:53:15 +0200 Subject: net: pppoe: use correct channel MTU when using Multilink PPP The PPP channel MTU is used with Multilink PPP when ppp_mp_explode() (see ppp_generic module) tries to determine how big a fragment might be. According to RFC 1661, the MTU excludes the 2-byte PPP protocol field, see the corresponding comment and code in ppp_mp_explode(): /* * hdrlen includes the 2-byte PPP protocol field, but the * MTU counts only the payload excluding the protocol field. * (RFC1661 Section 2) */ mtu = pch->chan->mtu - (hdrlen - 2); However, the pppoe module *does* include the PPP protocol field in the channel MTU, which is wrong as it causes the PPP payload to be 1-2 bytes too big under certain circumstances (one byte if PPP protocol compression is used, two otherwise), causing the generated Ethernet packets to be dropped. So the pppoe module has to subtract two bytes from the channel MTU. This error only manifests itself when using Multilink PPP, as otherwise the channel MTU is not used anywhere. In the following, I will describe how to reproduce this bug. We configure two pppd instances for multilink PPP over two PPPoE links, say eth2 and eth3, with a MTU of 1492 bytes for each link and a MRRU of 2976 bytes. (This MRRU is computed by adding the two link MTUs and subtracting the MP header twice, which is 4 bytes long.) The necessary pppd statements on both sides are "multilink mtu 1492 mru 1492 mrru 2976". On the client side, we additionally need "plugin rp-pppoe.so eth2" and "plugin rp-pppoe.so eth3", respectively; on the server side, we additionally need to start two pppoe-server instances to be able to establish two PPPoE sessions, one over eth2 and one over eth3. We set the MTU of the PPP network interface to the MRRU (2976) on both sides of the connection in order to make use of the higher bandwidth. (If we didn't do that, IP fragmentation would kick in, which we want to avoid.) Now we send a ICMPv4 echo request with a payload of 2948 bytes from client to server over the PPP link. This results in the following network packet: 2948 (echo payload) + 8 (ICMPv4 header) + 20 (IPv4 header) --------------------- 2976 (PPP payload) These 2976 bytes do not exceed the MTU of the PPP network interface, so the IP packet is not fragmented. Now the multilink PPP code in ppp_mp_explode() prepends one protocol byte (0x21 for IPv4), making the packet one byte bigger than the negotiated MRRU. So this packet would have to be divided in three fragments. But this does not happen as each link MTU is assumed to be two bytes larger. So this packet is diveded into two fragments only, one of size 1489 and one of size 1488. Now we have for that bigger fragment: 1489 (PPP payload) + 4 (MP header) + 2 (PPP protocol field for the MP payload (0x3d)) + 6 (PPPoE header) -------------------------- 1501 (Ethernet payload) This packet exceeds the link MTU and is discarded. If one configures the link MTU on the client side to 1501, one can see the discarded Ethernet frames with tcpdump running on the client. A ping -s 2948 -c 1 192.168.15.254 leads to the smaller fragment that is correctly received on the server side: (tcpdump -vvvne -i eth3 pppoes and ppp proto 0x3d) 52:54:00:ad:87:fd > 52:54:00:79:5c:d0, ethertype PPPoE S (0x8864), length 1514: PPPoE [ses 0x3] MLPPP (0x003d), length 1494: seq 0x000, Flags [end], length 1492 and to the bigger fragment that is not received on the server side: (tcpdump -vvvne -i eth2 pppoes and ppp proto 0x3d) 52:54:00:70:9e:89 > 52:54:00:5d:6f:b0, ethertype PPPoE S (0x8864), length 1515: PPPoE [ses 0x5] MLPPP (0x003d), length 1495: seq 0x000, Flags [begin], length 1493 With the patch below, we correctly obtain three fragments: 52:54:00:ad:87:fd > 52:54:00:79:5c:d0, ethertype PPPoE S (0x8864), length 1514: PPPoE [ses 0x1] MLPPP (0x003d), length 1494: seq 0x000, Flags [begin], length 1492 52:54:00:70:9e:89 > 52:54:00:5d:6f:b0, ethertype PPPoE S (0x8864), length 1514: PPPoE [ses 0x1] MLPPP (0x003d), length 1494: seq 0x000, Flags [none], length 1492 52:54:00:ad:87:fd > 52:54:00:79:5c:d0, ethertype PPPoE S (0x8864), length 27: PPPoE [ses 0x1] MLPPP (0x003d), length 7: seq 0x000, Flags [end], length 5 And the ICMPv4 echo request is successfully received at the server side: IP (tos 0x0, ttl 64, id 21925, offset 0, flags [DF], proto ICMP (1), length 2976) 192.168.222.2 > 192.168.15.254: ICMP echo request, id 30530, seq 0, length 2956 The bug was introduced in commit c9aa6895371b2a257401f59d3393c9f7ac5a8698 ("[PPPOE]: Advertise PPPoE MTU") from the very beginning. This patch applies to 3.10 upwards but the fix can be applied (with minor modifications) to kernels as old as 2.6.32. Signed-off-by: Christoph Schulz Signed-off-by: David S. Miller --- drivers/net/ppp/pppoe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c index 2ea7efd11857..6c9c16d76935 100644 --- a/drivers/net/ppp/pppoe.c +++ b/drivers/net/ppp/pppoe.c @@ -675,7 +675,7 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, po->chan.hdrlen = (sizeof(struct pppoe_hdr) + dev->hard_header_len); - po->chan.mtu = dev->mtu - sizeof(struct pppoe_hdr); + po->chan.mtu = dev->mtu - sizeof(struct pppoe_hdr) - 2; po->chan.private = sk; po->chan.ops = &pppoe_chan_ops; -- cgit v1.2.3 From 548d28bd0eac840d122b691279ce9f4ce6ecbfb6 Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Sun, 13 Jul 2014 09:47:47 +0200 Subject: bonding: fix ad_select module param check Obvious copy/paste error when I converted the ad_select to the new option API. "lacp_rate" there should be "ad_select" so we can get the proper value. CC: Jay Vosburgh CC: Veaceslav Falico CC: Andy Gospodarek CC: David S. Miller Fixes: 9e5f5eebe765 ("bonding: convert ad_select to use the new option API") Reported-by: Karim Scheik Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 3a451b6cd3d5..701f86cd5993 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4068,7 +4068,7 @@ static int bond_check_params(struct bond_params *params) } if (ad_select) { - bond_opt_initstr(&newval, lacp_rate); + bond_opt_initstr(&newval, ad_select); valptr = bond_opt_parse(bond_opt_get(BOND_OPT_AD_SELECT), &newval); if (!valptr) { -- cgit v1.2.3 From 32b333fe99069d090a12cc106fd5ae1002fe642f Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Mon, 14 Jul 2014 11:42:44 +0800 Subject: mlx4: mark napi id for gro_skb Napi id was not marked for gro_skb, this will lead rx busy loop won't work correctly since they stack never try to call low latency receive method because of a zero socket napi id. Fix this by marking napi id for gro_skb. The transaction rate of 1 byte netperf tcp_rr gets about 50% increased (from 20531.68 to 30610.88). Cc: Amir Vadai Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index 96724170308a..5535862f27cc 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -783,6 +783,7 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud PKT_HASH_TYPE_L3); skb_record_rx_queue(gro_skb, cq->ring); + skb_mark_napi_id(gro_skb, &cq->napi); if (ring->hwtstamp_rx_filter == HWTSTAMP_FILTER_ALL) { timestamp = mlx4_en_get_cqe_ts(cqe); -- cgit v1.2.3 From 3916a3192793fd3c11f69d623ef0cdbdbf9ea10a Mon Sep 17 00:00:00 2001 From: Christoph Schulz Date: Mon, 14 Jul 2014 08:01:10 +0200 Subject: net: ppp: don't call sk_chk_filter twice Commit 568f194e8bd16c353ad50f9ab95d98b20578a39d ("net: ppp: use sk_unattached_filter api") causes sk_chk_filter() to be called twice when setting a PPP pass or active filter. This applies to both the generic PPP subsystem implemented by drivers/net/ppp/ppp_generic.c and the ISDN PPP subsystem implemented by drivers/isdn/i4l/isdn_ppp.c. The first call is from within get_filter(). The second one is through the call chain ppp_ioctl() or isdn_ppp_ioctl() --> sk_unattached_filter_create() --> __sk_prepare_filter() --> sk_chk_filter() The first call from within get_filter() should be deleted as get_filter() is called just before calling sk_unattached_filter_create() later on, which eventually calls sk_chk_filter() anyway. For 3.15.x, this proposed change is a bugfix rather than a pure optimization as in that branch, sk_chk_filter() may replace filter codes by other codes which are not recognized when executing sk_chk_filter() a second time. So with 3.15.x, if sk_chk_filter() is called twice, the second invocation may yield EINVAL (this depends on the filter codes found in the filter to be set, but because the replacement is done for frequently used codes, this is almost always the case). The net effect is that setting pass and/or active PPP filters does not work anymore, since sk_unattached_filter_create() always returns EINVAL due to the second call to sk_chk_filter(), regardless whether the filter was originally sane or not. Signed-off-by: Christoph Schulz Acked-by: Daniel Borkmann Signed-off-by: David S. Miller --- drivers/isdn/i4l/isdn_ppp.c | 8 +------- drivers/net/ppp/ppp_generic.c | 8 +------- 2 files changed, 2 insertions(+), 14 deletions(-) diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c index 61ac63237446..a333b7f798d1 100644 --- a/drivers/isdn/i4l/isdn_ppp.c +++ b/drivers/isdn/i4l/isdn_ppp.c @@ -442,7 +442,7 @@ static int get_filter(void __user *arg, struct sock_filter **p) { struct sock_fprog uprog; struct sock_filter *code = NULL; - int len, err; + int len; if (copy_from_user(&uprog, arg, sizeof(uprog))) return -EFAULT; @@ -458,12 +458,6 @@ static int get_filter(void __user *arg, struct sock_filter **p) if (IS_ERR(code)) return PTR_ERR(code); - err = sk_chk_filter(code, uprog.len); - if (err) { - kfree(code); - return err; - } - *p = code; return uprog.len; } diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c index 91d6c1272fcf..e2f20f807de8 100644 --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c @@ -539,7 +539,7 @@ static int get_filter(void __user *arg, struct sock_filter **p) { struct sock_fprog uprog; struct sock_filter *code = NULL; - int len, err; + int len; if (copy_from_user(&uprog, arg, sizeof(uprog))) return -EFAULT; @@ -554,12 +554,6 @@ static int get_filter(void __user *arg, struct sock_filter **p) if (IS_ERR(code)) return PTR_ERR(code); - err = sk_chk_filter(code, uprog.len); - if (err) { - kfree(code); - return err; - } - *p = code; return uprog.len; } -- cgit v1.2.3 From 3cf521f7dc87c031617fd47e4b7aa2593c2f3daf Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Mon, 14 Jul 2014 17:02:31 -0700 Subject: net/l2tp: don't fall back on UDP [get|set]sockopt The l2tp [get|set]sockopt() code has fallen back to the UDP functions for socket option levels != SOL_PPPOL2TP since day one, but that has never actually worked, since the l2tp socket isn't an inet socket. As David Miller points out: "If we wanted this to work, it'd have to look up the tunnel and then use tunnel->sk, but I wonder how useful that would be" Since this can never have worked so nobody could possibly have depended on that functionality, just remove the broken code and return -EINVAL. Reported-by: Sasha Levin Acked-by: James Chapman Acked-by: David Miller Cc: Phil Turnbull Cc: Vegard Nossum Cc: Willy Tarreau Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- net/l2tp/l2tp_ppp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c index 950909f04ee6..13752d96275e 100644 --- a/net/l2tp/l2tp_ppp.c +++ b/net/l2tp/l2tp_ppp.c @@ -1365,7 +1365,7 @@ static int pppol2tp_setsockopt(struct socket *sock, int level, int optname, int err; if (level != SOL_PPPOL2TP) - return udp_prot.setsockopt(sk, level, optname, optval, optlen); + return -EINVAL; if (optlen < sizeof(int)) return -EINVAL; @@ -1491,7 +1491,7 @@ static int pppol2tp_getsockopt(struct socket *sock, int level, int optname, struct pppol2tp_session *ps; if (level != SOL_PPPOL2TP) - return udp_prot.getsockopt(sk, level, optname, optval, optlen); + return -EINVAL; if (get_user(len, optlen)) return -EFAULT; -- cgit v1.2.3 From 5c763edfe4879ffc3a87fef64f743d4b5497aabb Mon Sep 17 00:00:00 2001 From: Olivier Sobrie Date: Mon, 14 Jul 2014 12:08:49 +0200 Subject: hso: remove unused workqueue The workqueue "retry_unthrottle_workqueue" is not scheduled anywhere in the code. So, remove it. Signed-off-by: Olivier Sobrie Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index a3a05869309d..9ca2b418a3ee 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -261,7 +261,6 @@ struct hso_serial { u16 curr_rx_urb_offset; u8 rx_urb_filled[MAX_RX_URBS]; struct tasklet_struct unthrottle_tasklet; - struct work_struct retry_unthrottle_workqueue; }; struct hso_device { @@ -1252,14 +1251,6 @@ static void hso_unthrottle(struct tty_struct *tty) tasklet_hi_schedule(&serial->unthrottle_tasklet); } -static void hso_unthrottle_workfunc(struct work_struct *work) -{ - struct hso_serial *serial = - container_of(work, struct hso_serial, - retry_unthrottle_workqueue); - hso_unthrottle_tasklet(serial); -} - /* open the requested serial port */ static int hso_serial_open(struct tty_struct *tty, struct file *filp) { @@ -1295,8 +1286,6 @@ static int hso_serial_open(struct tty_struct *tty, struct file *filp) tasklet_init(&serial->unthrottle_tasklet, (void (*)(unsigned long))hso_unthrottle_tasklet, (unsigned long)serial); - INIT_WORK(&serial->retry_unthrottle_workqueue, - hso_unthrottle_workfunc); result = hso_start_serial_device(serial->parent, GFP_KERNEL); if (result) { hso_stop_serial_device(serial->parent); @@ -1345,7 +1334,6 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp) if (!usb_gone) hso_stop_serial_device(serial->parent); tasklet_kill(&serial->unthrottle_tasklet); - cancel_work_sync(&serial->retry_unthrottle_workqueue); } if (!usb_gone) -- cgit v1.2.3 From 8f9818af4eaef1150282e18355aaea425474a411 Mon Sep 17 00:00:00 2001 From: Olivier Sobrie Date: Mon, 14 Jul 2014 12:08:50 +0200 Subject: hso: fix deadlock when receiving bursts of data When the module sends bursts of data, sometimes a deadlock happens in the hso driver when the tty buffer doesn't get the chance to be flushed quickly enough. Remove the endless while loop in function put_rxbuf_data() which is called by the urb completion handler. If there isn't enough room in the tty buffer, discards all the data received in the URB. Cc: David Miller Cc: David Laight Cc: One Thousand Gnomes Cc: Dan Williams Cc: Jan Dumon Signed-off-by: Olivier Sobrie Acked-by: Alan Cox Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 38 +++++++++++++++++--------------------- 1 file changed, 17 insertions(+), 21 deletions(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 9ca2b418a3ee..a4272ed62da8 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -258,7 +258,6 @@ struct hso_serial { * so as not to drop characters on the floor. */ int curr_rx_urb_idx; - u16 curr_rx_urb_offset; u8 rx_urb_filled[MAX_RX_URBS]; struct tasklet_struct unthrottle_tasklet; }; @@ -2001,8 +2000,7 @@ static void ctrl_callback(struct urb *urb) static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial) { struct tty_struct *tty; - int write_length_remaining = 0; - int curr_write_len; + int count; /* Sanity check */ if (urb == NULL || serial == NULL) { @@ -2012,29 +2010,28 @@ static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial) tty = tty_port_tty_get(&serial->port); + if (tty && test_bit(TTY_THROTTLED, &tty->flags)) { + tty_kref_put(tty); + return -1; + } + /* Push data to tty */ - write_length_remaining = urb->actual_length - - serial->curr_rx_urb_offset; D1("data to push to tty"); - while (write_length_remaining) { - if (tty && test_bit(TTY_THROTTLED, &tty->flags)) { - tty_kref_put(tty); - return -1; - } - curr_write_len = tty_insert_flip_string(&serial->port, - urb->transfer_buffer + serial->curr_rx_urb_offset, - write_length_remaining); - serial->curr_rx_urb_offset += curr_write_len; - write_length_remaining -= curr_write_len; + count = tty_buffer_request_room(&serial->port, urb->actual_length); + if (count >= urb->actual_length) { + tty_insert_flip_string(&serial->port, urb->transfer_buffer, + urb->actual_length); tty_flip_buffer_push(&serial->port); + } else { + dev_warn(&serial->parent->usb->dev, + "dropping data, %d bytes lost\n", urb->actual_length); } + tty_kref_put(tty); - if (write_length_remaining == 0) { - serial->curr_rx_urb_offset = 0; - serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0; - } - return write_length_remaining; + serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0; + + return 0; } @@ -2205,7 +2202,6 @@ static int hso_stop_serial_device(struct hso_device *hso_dev) } } serial->curr_rx_urb_idx = 0; - serial->curr_rx_urb_offset = 0; if (serial->tx_urb) usb_kill_urb(serial->tx_urb); -- cgit v1.2.3 From bb78e7a12aa4898901d44bcb9d418f4188594427 Mon Sep 17 00:00:00 2001 From: Martin Peres Date: Mon, 14 Jul 2014 11:12:56 +0200 Subject: drm/nouveau/therm: fix a potential deadlock in the therm monitoring code Signed-off-by: Martin Peres Tested-by: Stefan Ringel Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/therm/temp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/therm/temp.c b/drivers/gpu/drm/nouveau/core/subdev/therm/temp.c index cfde9eb44ad0..6212537b90c5 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/therm/temp.c +++ b/drivers/gpu/drm/nouveau/core/subdev/therm/temp.c @@ -192,11 +192,11 @@ alarm_timer_callback(struct nouveau_alarm *alarm) nouveau_therm_threshold_hyst_polling(therm, &sensor->thrs_shutdown, NOUVEAU_THERM_THRS_SHUTDOWN); + spin_unlock_irqrestore(&priv->sensor.alarm_program_lock, flags); + /* schedule the next poll in one second */ if (therm->temp_get(therm) >= 0 && list_empty(&alarm->head)) - ptimer->alarm(ptimer, 1000 * 1000 * 1000, alarm); - - spin_unlock_irqrestore(&priv->sensor.alarm_program_lock, flags); + ptimer->alarm(ptimer, 1000000000ULL, alarm); } void -- cgit v1.2.3 From 4320f6b1d9db4ca912c5eb6ecb328b2e090e1586 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 15 Jul 2014 08:51:27 +0200 Subject: PM / sleep: Fix request_firmware() error at resume The commit [247bc037: PM / Sleep: Mitigate race between the freezer and request_firmware()] introduced the finer state control, but it also leads to a new bug; for example, a bug report regarding the firmware loading of intel BT device at suspend/resume: https://bugzilla.novell.com/show_bug.cgi?id=873790 The root cause seems to be a small window between the process resume and the clear of usermodehelper lock. The request_firmware() function checks the UMH lock and gives up when it's in UMH_DISABLE state. This is for avoiding the invalid f/w loading during suspend/resume phase. The problem is, however, that usermodehelper_enable() is called at the end of thaw_processes(). Thus, a thawed process in between can kick off the f/w loader code path (in this case, via btusb_setup_intel()) even before the call of usermodehelper_enable(). Then usermodehelper_read_trylock() returns an error and request_firmware() spews WARN_ON() in the end. This oneliner patch fixes the issue just by setting to UMH_FREEZING state again before restarting tasks, so that the call of request_firmware() will be blocked until the end of this function instead of returning an error. Fixes: 247bc0374254 (PM / Sleep: Mitigate race between the freezer and request_firmware()) Link: https://bugzilla.novell.com/show_bug.cgi?id=873790 Cc: 3.4+ # 3.4+ Signed-off-by: Takashi Iwai Signed-off-by: Rafael J. Wysocki --- kernel/power/process.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/power/process.c b/kernel/power/process.c index 0ca8d83e2369..4ee194eb524b 100644 --- a/kernel/power/process.c +++ b/kernel/power/process.c @@ -186,6 +186,7 @@ void thaw_processes(void) printk("Restarting tasks ... "); + __usermodehelper_set_disable_depth(UMH_FREEZING); thaw_workqueues(); read_lock(&tasklist_lock); -- cgit v1.2.3 From 653a3538f865d26350727df25397bee2bacde773 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 15 Jul 2014 14:26:13 +0200 Subject: PM / sleep: fix freeze_ops NULL pointer dereferences This patch fixes a NULL pointer dereference issue introduced by commit 1f0b63866fc1 (ACPI / PM: Hold ACPI scan lock over the "freeze" sleep state). Fixes: 1f0b63866fc1 (ACPI / PM: Hold ACPI scan lock over the "freeze" sleep state) Link: http://marc.info/?l=linux-pm&m=140541182017443&w=2 Reported-and-tested-by: Alexander Stein Signed-off-by: Zhang Rui Signed-off-by: Rafael J. Wysocki --- kernel/power/suspend.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c index 4dd8822f732a..ed35a4790afe 100644 --- a/kernel/power/suspend.c +++ b/kernel/power/suspend.c @@ -306,7 +306,7 @@ int suspend_devices_and_enter(suspend_state_t state) error = suspend_ops->begin(state); if (error) goto Close; - } else if (state == PM_SUSPEND_FREEZE && freeze_ops->begin) { + } else if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->begin) { error = freeze_ops->begin(); if (error) goto Close; @@ -335,7 +335,7 @@ int suspend_devices_and_enter(suspend_state_t state) Close: if (need_suspend_ops(state) && suspend_ops->end) suspend_ops->end(); - else if (state == PM_SUSPEND_FREEZE && freeze_ops->end) + else if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->end) freeze_ops->end(); return error; -- cgit v1.2.3 From 4da63c6fc426023d1a20e45508c47d7d68c6a53d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 15 Jul 2014 15:19:43 +0200 Subject: ALSA: hda - Fix broken PM due to incomplete i915 initialization When the initialization of Intel HDMI controller fails due to missing i915 kernel symbols (e.g. HD-audio is built in while i915 is module), the driver discontinues the probe. However, since the probe was done asynchronously, the driver object still remains, thus the relevant PM ops are still called at suspend/resume. This results in the bad access to the incomplete audio card object, eventually leads to Oops or stall at PM. This patch adds the missing checks of chip->init_failed flag at each PM callback in order to fix the problem above. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79561 Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index d690c26a197c..83cd19017cf3 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -596,7 +596,7 @@ static int azx_suspend(struct device *dev) struct azx *chip = card->private_data; struct azx_pcm *p; - if (chip->disabled) + if (chip->disabled || chip->init_failed) return 0; snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); @@ -628,7 +628,7 @@ static int azx_resume(struct device *dev) struct snd_card *card = dev_get_drvdata(dev); struct azx *chip = card->private_data; - if (chip->disabled) + if (chip->disabled || chip->init_failed) return 0; if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) { @@ -665,7 +665,7 @@ static int azx_runtime_suspend(struct device *dev) struct snd_card *card = dev_get_drvdata(dev); struct azx *chip = card->private_data; - if (chip->disabled) + if (chip->disabled || chip->init_failed) return 0; if (!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME)) @@ -692,7 +692,7 @@ static int azx_runtime_resume(struct device *dev) struct hda_codec *codec; int status; - if (chip->disabled) + if (chip->disabled || chip->init_failed) return 0; if (!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME)) @@ -729,7 +729,7 @@ static int azx_runtime_idle(struct device *dev) struct snd_card *card = dev_get_drvdata(dev); struct azx *chip = card->private_data; - if (chip->disabled) + if (chip->disabled || chip->init_failed) return 0; if (!power_save_controller || -- cgit v1.2.3 From 8abfb8727f4a724d31f9ccfd8013fbd16d539445 Mon Sep 17 00:00:00 2001 From: "zhangwei(Jovi)" Date: Thu, 18 Jul 2013 16:31:05 +0800 Subject: tracing: Add ftrace_trace_stack into __trace_puts/__trace_bputs Currently trace option stacktrace is not applicable for trace_printk with constant string argument, the reason is in __trace_puts/__trace_bputs ftrace_trace_stack is missing. In contrast, when using trace_printk with non constant string argument(will call into __trace_printk/__trace_bprintk), then trace option stacktrace is workable, this inconstant result will confuses users a lot. Link: http://lkml.kernel.org/p/51E7A7C9.9040401@huawei.com Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: zhangwei(Jovi) Signed-off-by: Steven Rostedt --- kernel/trace/trace.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index f243444a3772..a6ffc8918dda 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -466,6 +466,9 @@ int __trace_puts(unsigned long ip, const char *str, int size) struct print_entry *entry; unsigned long irq_flags; int alloc; + int pc; + + pc = preempt_count(); if (unlikely(tracing_selftest_running || tracing_disabled)) return 0; @@ -475,7 +478,7 @@ int __trace_puts(unsigned long ip, const char *str, int size) local_save_flags(irq_flags); buffer = global_trace.trace_buffer.buffer; event = trace_buffer_lock_reserve(buffer, TRACE_PRINT, alloc, - irq_flags, preempt_count()); + irq_flags, pc); if (!event) return 0; @@ -492,6 +495,7 @@ int __trace_puts(unsigned long ip, const char *str, int size) entry->buf[size] = '\0'; __buffer_unlock_commit(buffer, event); + ftrace_trace_stack(buffer, irq_flags, 4, pc); return size; } @@ -509,6 +513,9 @@ int __trace_bputs(unsigned long ip, const char *str) struct bputs_entry *entry; unsigned long irq_flags; int size = sizeof(struct bputs_entry); + int pc; + + pc = preempt_count(); if (unlikely(tracing_selftest_running || tracing_disabled)) return 0; @@ -516,7 +523,7 @@ int __trace_bputs(unsigned long ip, const char *str) local_save_flags(irq_flags); buffer = global_trace.trace_buffer.buffer; event = trace_buffer_lock_reserve(buffer, TRACE_BPUTS, size, - irq_flags, preempt_count()); + irq_flags, pc); if (!event) return 0; @@ -525,6 +532,7 @@ int __trace_bputs(unsigned long ip, const char *str) entry->str = str; __buffer_unlock_commit(buffer, event); + ftrace_trace_stack(buffer, irq_flags, 4, pc); return 1; } -- cgit v1.2.3 From 5f8bf2d263a20b986225ae1ed7d6759dc4b93af9 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Tue, 15 Jul 2014 11:05:12 -0400 Subject: tracing: Fix graph tracer with stack tracer on other archs Running my ftrace tests on PowerPC, it failed the test that checks if function_graph tracer is affected by the stack tracer. It was. Looking into this, I found that the update_function_graph_func() must be called even if the trampoline function is not changed. This is because archs like PowerPC do not support ftrace_ops being passed by assembly and instead uses a helper function (what the trampoline function points to). Since this function is not changed even when multiple ftrace_ops are added to the code, the test that falls out before calling update_function_graph_func() will miss that the update must still be done. Call update_function_graph_function() for all calls to update_ftrace_function() Cc: stable@vger.kernel.org # 3.3+ Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 5b372e3ed675..ac9d1dad630b 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -265,12 +265,12 @@ static void update_ftrace_function(void) func = ftrace_ops_list_func; } + update_function_graph_func(); + /* If there's no change, then do nothing more here */ if (ftrace_trace_function == func) return; - update_function_graph_func(); - /* * If we are using the list function, it doesn't care * about the function_trace_ops. -- cgit v1.2.3 From f0160a5a2912267c02cfe692eac955c360de5fdf Mon Sep 17 00:00:00 2001 From: "zhangwei(Jovi)" Date: Thu, 18 Jul 2013 16:31:18 +0800 Subject: tracing: Add TRACE_ITER_PRINTK flag check in __trace_puts/__trace_bputs The TRACE_ITER_PRINTK check in __trace_puts/__trace_bputs is missing, so add it, to be consistent with __trace_printk/__trace_bprintk. Those functions are all called by the same function: trace_printk(). Link: http://lkml.kernel.org/p/51E7A7D6.8090900@huawei.com Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: zhangwei(Jovi) Signed-off-by: Steven Rostedt --- kernel/trace/trace.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index a6ffc8918dda..bda9621638cc 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -468,6 +468,9 @@ int __trace_puts(unsigned long ip, const char *str, int size) int alloc; int pc; + if (!(trace_flags & TRACE_ITER_PRINTK)) + return 0; + pc = preempt_count(); if (unlikely(tracing_selftest_running || tracing_disabled)) @@ -515,6 +518,9 @@ int __trace_bputs(unsigned long ip, const char *str) int size = sizeof(struct bputs_entry); int pc; + if (!(trace_flags & TRACE_ITER_PRINTK)) + return 0; + pc = preempt_count(); if (unlikely(tracing_selftest_running || tracing_disabled)) -- cgit v1.2.3 From 9aec8629ec829fc9403788cd959e05dd87988bd1 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Mon, 14 Jul 2014 16:35:54 -0400 Subject: dm thin metadata: do not allow the data block size to change The block size for the thin-pool's data device must remained fixed for the life of the thin-pool. Disallow any attempt to change the thin-pool's data block size. It should be noted that attempting to change the data block size via thin-pool table reload will be ignored as a side-effect of the thin-pool handover that the thin-pool target does during thin-pool table reload. Here is an example outcome of attempting to load a thin-pool table that reduced the thin-pool's data block size from 1024K to 512K. Before: kernel: device-mapper: thin: 253:4: growing the data device from 204800 to 409600 blocks After: kernel: device-mapper: thin metadata: changing the data block size (from 2048 to 1024) is not supported kernel: device-mapper: table: 253:4: thin-pool: Error creating metadata object kernel: device-mapper: ioctl: error adding target to table Signed-off-by: Mike Snitzer Acked-by: Joe Thornber Cc: stable@vger.kernel.org --- drivers/md/dm-thin-metadata.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c index b086a945edcb..e9d33ad59df5 100644 --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -613,6 +613,15 @@ static int __open_metadata(struct dm_pool_metadata *pmd) disk_super = dm_block_data(sblock); + /* Verify the data block size hasn't changed */ + if (le32_to_cpu(disk_super->data_block_size) != pmd->data_block_size) { + DMERR("changing the data block size (from %u to %llu) is not supported", + le32_to_cpu(disk_super->data_block_size), + (unsigned long long)pmd->data_block_size); + r = -EINVAL; + goto bad_unlock_sblock; + } + r = __check_incompat_features(disk_super, pmd); if (r < 0) goto bad_unlock_sblock; -- cgit v1.2.3 From 048e5a07f282c57815b3901d4a68a77fa131ce0a Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Mon, 14 Jul 2014 16:59:39 -0400 Subject: dm cache metadata: do not allow the data block size to change The block size for the dm-cache's data device must remained fixed for the life of the cache. Disallow any attempt to change the cache's data block size. Signed-off-by: Mike Snitzer Acked-by: Joe Thornber Cc: stable@vger.kernel.org --- drivers/md/dm-cache-metadata.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/md/dm-cache-metadata.c b/drivers/md/dm-cache-metadata.c index 4ead4ba60656..d2899e7eb3aa 100644 --- a/drivers/md/dm-cache-metadata.c +++ b/drivers/md/dm-cache-metadata.c @@ -425,6 +425,15 @@ static int __open_metadata(struct dm_cache_metadata *cmd) disk_super = dm_block_data(sblock); + /* Verify the data block size hasn't changed */ + if (le32_to_cpu(disk_super->data_block_size) != cmd->data_block_size) { + DMERR("changing the data block size (from %u to %llu) is not supported", + le32_to_cpu(disk_super->data_block_size), + (unsigned long long)cmd->data_block_size); + r = -EINVAL; + goto bad; + } + r = __check_incompat_features(disk_super, cmd); if (r < 0) goto bad; -- cgit v1.2.3 From d68aab6b8f572406aa93b45ef6483934dd3b54a6 Mon Sep 17 00:00:00 2001 From: Niu Yawei Date: Wed, 4 Jun 2014 12:22:13 +0800 Subject: quota: missing lock in dqcache_shrink_scan() Commit 1ab6c4997e04 (fs: convert fs shrinkers to new scan/count API) accidentally removed locking from quota shrinker. Fix it - dqcache_shrink_scan() should use dq_list_lock to protect the scan on free_dquots list. CC: stable@vger.kernel.org Fixes: 1ab6c4997e04a00c50c6d786c2f046adc0d1f5de Signed-off-by: Niu Yawei Signed-off-by: Jan Kara --- fs/quota/dquot.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c index 9cd5f63715c0..7f30bdc57d13 100644 --- a/fs/quota/dquot.c +++ b/fs/quota/dquot.c @@ -702,6 +702,7 @@ dqcache_shrink_scan(struct shrinker *shrink, struct shrink_control *sc) struct dquot *dquot; unsigned long freed = 0; + spin_lock(&dq_list_lock); head = free_dquots.prev; while (head != &free_dquots && sc->nr_to_scan) { dquot = list_entry(head, struct dquot, dq_free); @@ -713,6 +714,7 @@ dqcache_shrink_scan(struct shrinker *shrink, struct shrink_control *sc) freed++; head = free_dquots.prev; } + spin_unlock(&dq_list_lock); return freed; } -- cgit v1.2.3 From 97b8ee845393701edc06e27ccec2876ff9596019 Mon Sep 17 00:00:00 2001 From: Martin Lau Date: Mon, 9 Jun 2014 23:06:42 -0700 Subject: ring-buffer: Fix polling on trace_pipe ring_buffer_poll_wait() should always put the poll_table to its wait_queue even there is immediate data available. Otherwise, the following epoll and read sequence will eventually hang forever: 1. Put some data to make the trace_pipe ring_buffer read ready first 2. epoll_ctl(efd, EPOLL_CTL_ADD, trace_pipe_fd, ee) 3. epoll_wait() 4. read(trace_pipe_fd) till EAGAIN 5. Add some more data to the trace_pipe ring_buffer 6. epoll_wait() -> this epoll_wait() will block forever ~ During the epoll_ctl(efd, EPOLL_CTL_ADD,...) call in step 2, ring_buffer_poll_wait() returns immediately without adding poll_table, which has poll_table->_qproc pointing to ep_poll_callback(), to its wait_queue. ~ During the epoll_wait() call in step 3 and step 6, ring_buffer_poll_wait() cannot add ep_poll_callback() to its wait_queue because the poll_table->_qproc is NULL and it is how epoll works. ~ When there is new data available in step 6, ring_buffer does not know it has to call ep_poll_callback() because it is not in its wait queue. Hence, block forever. Other poll implementation seems to call poll_wait() unconditionally as the very first thing to do. For example, tcp_poll() in tcp.c. Link: http://lkml.kernel.org/p/20140610060637.GA14045@devbig242.prn2.facebook.com Cc: stable@vger.kernel.org # 2.6.27 Fixes: 2a2cc8f7c4d0 "ftrace: allow the event pipe to be polled" Reviewed-by: Chris Mason Signed-off-by: Martin Lau Signed-off-by: Steven Rostedt --- kernel/trace/ring_buffer.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 7c56c3d06943..ff7027199a9a 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -616,10 +616,6 @@ int ring_buffer_poll_wait(struct ring_buffer *buffer, int cpu, struct ring_buffer_per_cpu *cpu_buffer; struct rb_irq_work *work; - if ((cpu == RING_BUFFER_ALL_CPUS && !ring_buffer_empty(buffer)) || - (cpu != RING_BUFFER_ALL_CPUS && !ring_buffer_empty_cpu(buffer, cpu))) - return POLLIN | POLLRDNORM; - if (cpu == RING_BUFFER_ALL_CPUS) work = &buffer->irq_work; else { -- cgit v1.2.3 From 44305ebde243a7cce2c592cc89afe5041d8bf884 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 20 May 2014 22:35:38 -0700 Subject: UBI: fastmap: do not miss bit-flips The return value from 'ubi_io_read_ec_hdr()' was stored in 'err', not in 'ret'. This fix makes sure Fastmap-enabled UBI does not miss bit-flip while reading EC headers, events and scrubs the affected PEBs. This issue was reported by Coverity Scan. Artem: improved the commit message. Signed-off-by: Brian Norris Acked-by: Richard Weinberger Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/fastmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/ubi/fastmap.c b/drivers/mtd/ubi/fastmap.c index 72f39daee649..0431b46d9fd9 100644 --- a/drivers/mtd/ubi/fastmap.c +++ b/drivers/mtd/ubi/fastmap.c @@ -423,7 +423,7 @@ static int scan_pool(struct ubi_device *ubi, struct ubi_attach_info *ai, pnum, err); ret = err > 0 ? UBI_BAD_FASTMAP : err; goto out; - } else if (ret == UBI_IO_BITFLIPS) + } else if (err == UBI_IO_BITFLIPS) scrub = 1; /* -- cgit v1.2.3 From d3f44fbabe55132832e152606365adb640296378 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 30 Jun 2014 16:32:29 +0200 Subject: x86: Remove unused variable "polling" Compile tested. "polling" is unused since commit f80c5b39b80a ("sched/idle, x86: Switch from TS_POLLING to TIF_POLLING_NRFLAG"). Signed-off-by: Paul Bolle Signed-off-by: Peter Zijlstra Cc: Jiri Kosina Link: http://lkml.kernel.org/r/1404138749.2978.6.camel@x41 Signed-off-by: Ingo Molnar --- arch/x86/kernel/apm_32.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index f3a1f04ed4cb..584874451414 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -841,7 +841,6 @@ static int apm_do_idle(void) u32 eax; u8 ret = 0; int idled = 0; - int polling; int err = 0; if (!need_resched()) { -- cgit v1.2.3 From 37e9562453b813d2ea527bd9531fef2c3c592847 Mon Sep 17 00:00:00 2001 From: Jason Low Date: Fri, 4 Jul 2014 20:49:32 -0700 Subject: locking/rwsem: Allow conservative optimistic spinning when readers have lock Commit 4fc828e24cd9 ("locking/rwsem: Support optimistic spinning") introduced a major performance regression for workloads such as xfs_repair which mix read and write locking of the mmap_sem across many threads. The result was xfs_repair ran 5x slower on 3.16-rc2 than on 3.15 and using 20x more system CPU time. Perf profiles indicate in some workloads that significant time can be spent spinning on !owner. This is because we don't set the lock owner when readers(s) obtain the rwsem. In this patch, we'll modify rwsem_can_spin_on_owner() such that we'll return false if there is no lock owner. The rationale is that if we just entered the slowpath, yet there is no lock owner, then there is a possibility that a reader has the lock. To be conservative, we'll avoid spinning in these situations. This patch reduced the total run time of the xfs_repair workload from about 4 minutes 24 seconds down to approximately 1 minute 26 seconds, back to close to the same performance as on 3.15. Retesting of AIM7, which were some of the workloads used to test the original optimistic spinning code, confirmed that we still get big performance gains with optimistic spinning, even with this additional regression fix. Davidlohr found that while the 'custom' workload took a performance hit of ~-14% to throughput for >300 users with this additional patch, the overall gain with optimistic spinning is still ~+45%. The 'disk' workload even improved by ~+15% at >1000 users. Tested-by: Dave Chinner Acked-by: Davidlohr Bueso Signed-off-by: Jason Low Signed-off-by: Peter Zijlstra Cc: Tim Chen Cc: Linus Torvalds Link: http://lkml.kernel.org/r/1404532172.2572.30.camel@j-VirtualBox Signed-off-by: Ingo Molnar --- kernel/locking/rwsem-xadd.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/kernel/locking/rwsem-xadd.c b/kernel/locking/rwsem-xadd.c index dacc32142fcc..c40c7d28661d 100644 --- a/kernel/locking/rwsem-xadd.c +++ b/kernel/locking/rwsem-xadd.c @@ -285,10 +285,10 @@ static inline bool rwsem_try_write_lock_unqueued(struct rw_semaphore *sem) static inline bool rwsem_can_spin_on_owner(struct rw_semaphore *sem) { struct task_struct *owner; - bool on_cpu = true; + bool on_cpu = false; if (need_resched()) - return 0; + return false; rcu_read_lock(); owner = ACCESS_ONCE(sem->owner); @@ -297,9 +297,9 @@ static inline bool rwsem_can_spin_on_owner(struct rw_semaphore *sem) rcu_read_unlock(); /* - * If sem->owner is not set, the rwsem owner may have - * just acquired it and not set the owner yet or the rwsem - * has been released. + * If sem->owner is not set, yet we have just recently entered the + * slowpath, then there is a possibility reader(s) may have the lock. + * To be safe, avoid spinning in these situations. */ return on_cpu; } -- cgit v1.2.3 From 046a619d8e9746fa4c0e29e8c6b78e16efc008a8 Mon Sep 17 00:00:00 2001 From: Jason Low Date: Mon, 14 Jul 2014 10:27:48 -0700 Subject: locking/spinlocks/mcs: Rename optimistic_spin_queue() to optimistic_spin_node() Currently, the per-cpu nodes structure for the cancellable MCS spinlock is named "optimistic_spin_queue". However, in a follow up patch in the series we will be introducing a new structure that serves as the new "handle" for the lock. It would make more sense if that structure is named "optimistic_spin_queue". Additionally, since the current use of the "optimistic_spin_queue" structure are "nodes", it might be better if we rename them to "node" anyway. This preparatory patch renames all current "optimistic_spin_queue" to "optimistic_spin_node". Signed-off-by: Jason Low Signed-off-by: Peter Zijlstra Cc: Scott Norton Cc: "Paul E. McKenney" Cc: Dave Chinner Cc: Waiman Long Cc: Davidlohr Bueso Cc: Rik van Riel Cc: Andrew Morton Cc: "H. Peter Anvin" Cc: Steven Rostedt Cc: Tim Chen Cc: Konrad Rzeszutek Wilk Cc: Aswin Chandramouleeswaran Cc: Linus Torvalds Cc: Chris Mason Cc: Heiko Carstens Cc: Josef Bacik Link: http://lkml.kernel.org/r/1405358872-3732-2-git-send-email-jason.low2@hp.com Signed-off-by: Ingo Molnar --- include/linux/mutex.h | 4 ++-- include/linux/rwsem.h | 4 ++-- kernel/locking/mcs_spinlock.c | 24 ++++++++++++------------ kernel/locking/mcs_spinlock.h | 8 ++++---- 4 files changed, 20 insertions(+), 20 deletions(-) diff --git a/include/linux/mutex.h b/include/linux/mutex.h index 11692dea18aa..885f3f56a77f 100644 --- a/include/linux/mutex.h +++ b/include/linux/mutex.h @@ -46,7 +46,7 @@ * - detects multi-task circular deadlocks and prints out all affected * locks and tasks (and only those tasks) */ -struct optimistic_spin_queue; +struct optimistic_spin_node; struct mutex { /* 1: unlocked, 0: locked, negative: locked, possible waiters */ atomic_t count; @@ -56,7 +56,7 @@ struct mutex { struct task_struct *owner; #endif #ifdef CONFIG_MUTEX_SPIN_ON_OWNER - struct optimistic_spin_queue *osq; /* Spinner MCS lock */ + struct optimistic_spin_node *osq; /* Spinner MCS lock */ #endif #ifdef CONFIG_DEBUG_MUTEXES const char *name; diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h index 8d79708146aa..ba3f108ddea1 100644 --- a/include/linux/rwsem.h +++ b/include/linux/rwsem.h @@ -16,7 +16,7 @@ #include -struct optimistic_spin_queue; +struct optimistic_spin_node; struct rw_semaphore; #ifdef CONFIG_RWSEM_GENERIC_SPINLOCK @@ -33,7 +33,7 @@ struct rw_semaphore { * if the owner is running on the cpu. */ struct task_struct *owner; - struct optimistic_spin_queue *osq; /* spinner MCS lock */ + struct optimistic_spin_node *osq; /* spinner MCS lock */ #endif #ifdef CONFIG_DEBUG_LOCK_ALLOC struct lockdep_map dep_map; diff --git a/kernel/locking/mcs_spinlock.c b/kernel/locking/mcs_spinlock.c index 838dc9e00669..e9866f70e828 100644 --- a/kernel/locking/mcs_spinlock.c +++ b/kernel/locking/mcs_spinlock.c @@ -14,18 +14,18 @@ * called from interrupt context and we have preemption disabled while * spinning. */ -static DEFINE_PER_CPU_SHARED_ALIGNED(struct optimistic_spin_queue, osq_node); +static DEFINE_PER_CPU_SHARED_ALIGNED(struct optimistic_spin_node, osq_node); /* * Get a stable @node->next pointer, either for unlock() or unqueue() purposes. * Can return NULL in case we were the last queued and we updated @lock instead. */ -static inline struct optimistic_spin_queue * -osq_wait_next(struct optimistic_spin_queue **lock, - struct optimistic_spin_queue *node, - struct optimistic_spin_queue *prev) +static inline struct optimistic_spin_node * +osq_wait_next(struct optimistic_spin_node **lock, + struct optimistic_spin_node *node, + struct optimistic_spin_node *prev) { - struct optimistic_spin_queue *next = NULL; + struct optimistic_spin_node *next = NULL; for (;;) { if (*lock == node && cmpxchg(lock, node, prev) == node) { @@ -59,10 +59,10 @@ osq_wait_next(struct optimistic_spin_queue **lock, return next; } -bool osq_lock(struct optimistic_spin_queue **lock) +bool osq_lock(struct optimistic_spin_node **lock) { - struct optimistic_spin_queue *node = this_cpu_ptr(&osq_node); - struct optimistic_spin_queue *prev, *next; + struct optimistic_spin_node *node = this_cpu_ptr(&osq_node); + struct optimistic_spin_node *prev, *next; node->locked = 0; node->next = NULL; @@ -149,10 +149,10 @@ unqueue: return false; } -void osq_unlock(struct optimistic_spin_queue **lock) +void osq_unlock(struct optimistic_spin_node **lock) { - struct optimistic_spin_queue *node = this_cpu_ptr(&osq_node); - struct optimistic_spin_queue *next; + struct optimistic_spin_node *node = this_cpu_ptr(&osq_node); + struct optimistic_spin_node *next; /* * Fast path for the uncontended case. diff --git a/kernel/locking/mcs_spinlock.h b/kernel/locking/mcs_spinlock.h index a2dbac4aca6b..c99dc0052f49 100644 --- a/kernel/locking/mcs_spinlock.h +++ b/kernel/locking/mcs_spinlock.h @@ -118,12 +118,12 @@ void mcs_spin_unlock(struct mcs_spinlock **lock, struct mcs_spinlock *node) * mutex_lock()/rwsem_down_{read,write}() etc. */ -struct optimistic_spin_queue { - struct optimistic_spin_queue *next, *prev; +struct optimistic_spin_node { + struct optimistic_spin_node *next, *prev; int locked; /* 1 if lock acquired */ }; -extern bool osq_lock(struct optimistic_spin_queue **lock); -extern void osq_unlock(struct optimistic_spin_queue **lock); +extern bool osq_lock(struct optimistic_spin_node **lock); +extern void osq_unlock(struct optimistic_spin_node **lock); #endif /* __LINUX_MCS_SPINLOCK_H */ -- cgit v1.2.3 From 90631822c5d307b5410500806e8ac3e63928aa3e Mon Sep 17 00:00:00 2001 From: Jason Low Date: Mon, 14 Jul 2014 10:27:49 -0700 Subject: locking/spinlocks/mcs: Convert osq lock to atomic_t to reduce overhead The cancellable MCS spinlock is currently used to queue threads that are doing optimistic spinning. It uses per-cpu nodes, where a thread obtaining the lock would access and queue the local node corresponding to the CPU that it's running on. Currently, the cancellable MCS lock is implemented by using pointers to these nodes. In this patch, instead of operating on pointers to the per-cpu nodes, we store the CPU numbers in which the per-cpu nodes correspond to in atomic_t. A similar concept is used with the qspinlock. By operating on the CPU # of the nodes using atomic_t instead of pointers to those nodes, this can reduce the overhead of the cancellable MCS spinlock by 32 bits (on 64 bit systems). Signed-off-by: Jason Low Signed-off-by: Peter Zijlstra Cc: Scott Norton Cc: "Paul E. McKenney" Cc: Dave Chinner Cc: Waiman Long Cc: Davidlohr Bueso Cc: Rik van Riel Cc: Andrew Morton Cc: "H. Peter Anvin" Cc: Steven Rostedt Cc: Tim Chen Cc: Konrad Rzeszutek Wilk Cc: Aswin Chandramouleeswaran Cc: Linus Torvalds Cc: Chris Mason Cc: Heiko Carstens Cc: Josef Bacik Link: http://lkml.kernel.org/r/1405358872-3732-3-git-send-email-jason.low2@hp.com Signed-off-by: Ingo Molnar --- include/linux/mutex.h | 4 ++-- include/linux/osq_lock.h | 19 ++++++++++++++++++ include/linux/rwsem.h | 7 +++---- kernel/locking/mcs_spinlock.c | 46 ++++++++++++++++++++++++++++++++++++------- kernel/locking/mcs_spinlock.h | 5 +++-- kernel/locking/mutex.c | 2 +- kernel/locking/rwsem-xadd.c | 2 +- 7 files changed, 68 insertions(+), 17 deletions(-) create mode 100644 include/linux/osq_lock.h diff --git a/include/linux/mutex.h b/include/linux/mutex.h index 885f3f56a77f..42aa9b9ecd5f 100644 --- a/include/linux/mutex.h +++ b/include/linux/mutex.h @@ -17,6 +17,7 @@ #include #include #include +#include /* * Simple, straightforward mutexes with strict semantics: @@ -46,7 +47,6 @@ * - detects multi-task circular deadlocks and prints out all affected * locks and tasks (and only those tasks) */ -struct optimistic_spin_node; struct mutex { /* 1: unlocked, 0: locked, negative: locked, possible waiters */ atomic_t count; @@ -56,7 +56,7 @@ struct mutex { struct task_struct *owner; #endif #ifdef CONFIG_MUTEX_SPIN_ON_OWNER - struct optimistic_spin_node *osq; /* Spinner MCS lock */ + struct optimistic_spin_queue osq; /* Spinner MCS lock */ #endif #ifdef CONFIG_DEBUG_MUTEXES const char *name; diff --git a/include/linux/osq_lock.h b/include/linux/osq_lock.h new file mode 100644 index 000000000000..b001682bf7cb --- /dev/null +++ b/include/linux/osq_lock.h @@ -0,0 +1,19 @@ +#ifndef __LINUX_OSQ_LOCK_H +#define __LINUX_OSQ_LOCK_H + +/* + * An MCS like lock especially tailored for optimistic spinning for sleeping + * lock implementations (mutex, rwsem, etc). + */ + +#define OSQ_UNLOCKED_VAL (0) + +struct optimistic_spin_queue { + /* + * Stores an encoded value of the CPU # of the tail node in the queue. + * If the queue is empty, then it's set to OSQ_UNLOCKED_VAL. + */ + atomic_t tail; +}; + +#endif diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h index ba3f108ddea1..9fdcdd03507d 100644 --- a/include/linux/rwsem.h +++ b/include/linux/rwsem.h @@ -13,10 +13,9 @@ #include #include #include - #include +#include -struct optimistic_spin_node; struct rw_semaphore; #ifdef CONFIG_RWSEM_GENERIC_SPINLOCK @@ -33,7 +32,7 @@ struct rw_semaphore { * if the owner is running on the cpu. */ struct task_struct *owner; - struct optimistic_spin_node *osq; /* spinner MCS lock */ + struct optimistic_spin_queue osq; /* spinner MCS lock */ #endif #ifdef CONFIG_DEBUG_LOCK_ALLOC struct lockdep_map dep_map; @@ -70,7 +69,7 @@ static inline int rwsem_is_locked(struct rw_semaphore *sem) __RAW_SPIN_LOCK_UNLOCKED(name.wait_lock), \ LIST_HEAD_INIT((name).wait_list), \ NULL, /* owner */ \ - NULL /* mcs lock */ \ + { ATOMIC_INIT(OSQ_UNLOCKED_VAL) } /* osq */ \ __RWSEM_DEP_MAP_INIT(name) } #else #define __RWSEM_INITIALIZER(name) \ diff --git a/kernel/locking/mcs_spinlock.c b/kernel/locking/mcs_spinlock.c index e9866f70e828..32fc16c0a545 100644 --- a/kernel/locking/mcs_spinlock.c +++ b/kernel/locking/mcs_spinlock.c @@ -16,19 +16,45 @@ */ static DEFINE_PER_CPU_SHARED_ALIGNED(struct optimistic_spin_node, osq_node); +/* + * We use the value 0 to represent "no CPU", thus the encoded value + * will be the CPU number incremented by 1. + */ +static inline int encode_cpu(int cpu_nr) +{ + return cpu_nr + 1; +} + +static inline struct optimistic_spin_node *decode_cpu(int encoded_cpu_val) +{ + int cpu_nr = encoded_cpu_val - 1; + + return per_cpu_ptr(&osq_node, cpu_nr); +} + /* * Get a stable @node->next pointer, either for unlock() or unqueue() purposes. * Can return NULL in case we were the last queued and we updated @lock instead. */ static inline struct optimistic_spin_node * -osq_wait_next(struct optimistic_spin_node **lock, +osq_wait_next(struct optimistic_spin_queue *lock, struct optimistic_spin_node *node, struct optimistic_spin_node *prev) { struct optimistic_spin_node *next = NULL; + int curr = encode_cpu(smp_processor_id()); + int old; + + /* + * If there is a prev node in queue, then the 'old' value will be + * the prev node's CPU #, else it's set to OSQ_UNLOCKED_VAL since if + * we're currently last in queue, then the queue will then become empty. + */ + old = prev ? prev->cpu : OSQ_UNLOCKED_VAL; for (;;) { - if (*lock == node && cmpxchg(lock, node, prev) == node) { + if (atomic_read(&lock->tail) == curr && + atomic_cmpxchg(&lock->tail, curr, old) == curr) { /* * We were the last queued, we moved @lock back. @prev * will now observe @lock and will complete its @@ -59,18 +85,23 @@ osq_wait_next(struct optimistic_spin_node **lock, return next; } -bool osq_lock(struct optimistic_spin_node **lock) +bool osq_lock(struct optimistic_spin_queue *lock) { struct optimistic_spin_node *node = this_cpu_ptr(&osq_node); struct optimistic_spin_node *prev, *next; + int curr = encode_cpu(smp_processor_id()); + int old; node->locked = 0; node->next = NULL; + node->cpu = curr; - node->prev = prev = xchg(lock, node); - if (likely(prev == NULL)) + old = atomic_xchg(&lock->tail, curr); + if (old == OSQ_UNLOCKED_VAL) return true; + prev = decode_cpu(old); + node->prev = prev; ACCESS_ONCE(prev->next) = node; /* @@ -149,15 +180,16 @@ unqueue: return false; } -void osq_unlock(struct optimistic_spin_node **lock) +void osq_unlock(struct optimistic_spin_queue *lock) { struct optimistic_spin_node *node = this_cpu_ptr(&osq_node); struct optimistic_spin_node *next; + int curr = encode_cpu(smp_processor_id()); /* * Fast path for the uncontended case. */ - if (likely(cmpxchg(lock, node, NULL) == node)) + if (likely(atomic_cmpxchg(&lock->tail, curr, OSQ_UNLOCKED_VAL) == curr)) return; /* diff --git a/kernel/locking/mcs_spinlock.h b/kernel/locking/mcs_spinlock.h index c99dc0052f49..74356dc0ce29 100644 --- a/kernel/locking/mcs_spinlock.h +++ b/kernel/locking/mcs_spinlock.h @@ -121,9 +121,10 @@ void mcs_spin_unlock(struct mcs_spinlock **lock, struct mcs_spinlock *node) struct optimistic_spin_node { struct optimistic_spin_node *next, *prev; int locked; /* 1 if lock acquired */ + int cpu; /* encoded CPU # value */ }; -extern bool osq_lock(struct optimistic_spin_node **lock); -extern void osq_unlock(struct optimistic_spin_node **lock); +extern bool osq_lock(struct optimistic_spin_queue *lock); +extern void osq_unlock(struct optimistic_spin_queue *lock); #endif /* __LINUX_MCS_SPINLOCK_H */ diff --git a/kernel/locking/mutex.c b/kernel/locking/mutex.c index bc73d33c6760..d9b313906caa 100644 --- a/kernel/locking/mutex.c +++ b/kernel/locking/mutex.c @@ -60,7 +60,7 @@ __mutex_init(struct mutex *lock, const char *name, struct lock_class_key *key) INIT_LIST_HEAD(&lock->wait_list); mutex_clear_owner(lock); #ifdef CONFIG_MUTEX_SPIN_ON_OWNER - lock->osq = NULL; + atomic_set(&lock->osq.tail, OSQ_UNLOCKED_VAL); #endif debug_mutex_init(lock, name, key); diff --git a/kernel/locking/rwsem-xadd.c b/kernel/locking/rwsem-xadd.c index c40c7d28661d..b77a6230bbf6 100644 --- a/kernel/locking/rwsem-xadd.c +++ b/kernel/locking/rwsem-xadd.c @@ -84,7 +84,7 @@ void __init_rwsem(struct rw_semaphore *sem, const char *name, INIT_LIST_HEAD(&sem->wait_list); #ifdef CONFIG_SMP sem->owner = NULL; - sem->osq = NULL; + atomic_set(&sem->osq.tail, OSQ_UNLOCKED_VAL); #endif } -- cgit v1.2.3 From 4d9d951e6b5df85ccfca2c5bd8b4f5c71d256b65 Mon Sep 17 00:00:00 2001 From: Jason Low Date: Mon, 14 Jul 2014 10:27:50 -0700 Subject: locking/spinlocks/mcs: Introduce and use init macro and function for osq locks Currently, we initialize the osq lock by directly setting the lock's values. It would be preferable if we use an init macro to do the initialization like we do with other locks. This patch introduces and uses a macro and function for initializing the osq lock. Signed-off-by: Jason Low Signed-off-by: Peter Zijlstra Cc: Scott Norton Cc: "Paul E. McKenney" Cc: Dave Chinner Cc: Waiman Long Cc: Davidlohr Bueso Cc: Rik van Riel Cc: Andrew Morton Cc: "H. Peter Anvin" Cc: Steven Rostedt Cc: Tim Chen Cc: Konrad Rzeszutek Wilk Cc: Aswin Chandramouleeswaran Cc: Linus Torvalds Cc: Chris Mason Cc: Josef Bacik Link: http://lkml.kernel.org/r/1405358872-3732-4-git-send-email-jason.low2@hp.com Signed-off-by: Ingo Molnar --- include/linux/osq_lock.h | 8 ++++++++ include/linux/rwsem.h | 2 +- kernel/locking/mutex.c | 2 +- kernel/locking/rwsem-xadd.c | 2 +- 4 files changed, 11 insertions(+), 3 deletions(-) diff --git a/include/linux/osq_lock.h b/include/linux/osq_lock.h index b001682bf7cb..90230d5811c5 100644 --- a/include/linux/osq_lock.h +++ b/include/linux/osq_lock.h @@ -16,4 +16,12 @@ struct optimistic_spin_queue { atomic_t tail; }; +/* Init macro and function. */ +#define OSQ_LOCK_UNLOCKED { ATOMIC_INIT(OSQ_UNLOCKED_VAL) } + +static inline void osq_lock_init(struct optimistic_spin_queue *lock) +{ + atomic_set(&lock->tail, OSQ_UNLOCKED_VAL); +} + #endif diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h index 9fdcdd03507d..25cd9aa2f3d7 100644 --- a/include/linux/rwsem.h +++ b/include/linux/rwsem.h @@ -69,7 +69,7 @@ static inline int rwsem_is_locked(struct rw_semaphore *sem) __RAW_SPIN_LOCK_UNLOCKED(name.wait_lock), \ LIST_HEAD_INIT((name).wait_list), \ NULL, /* owner */ \ - { ATOMIC_INIT(OSQ_UNLOCKED_VAL) } /* osq */ \ + OSQ_LOCK_UNLOCKED /* osq */ \ __RWSEM_DEP_MAP_INIT(name) } #else #define __RWSEM_INITIALIZER(name) \ diff --git a/kernel/locking/mutex.c b/kernel/locking/mutex.c index d9b313906caa..acca2c1a3c5e 100644 --- a/kernel/locking/mutex.c +++ b/kernel/locking/mutex.c @@ -60,7 +60,7 @@ __mutex_init(struct mutex *lock, const char *name, struct lock_class_key *key) INIT_LIST_HEAD(&lock->wait_list); mutex_clear_owner(lock); #ifdef CONFIG_MUTEX_SPIN_ON_OWNER - atomic_set(&lock->osq.tail, OSQ_UNLOCKED_VAL); + osq_lock_init(&lock->osq); #endif debug_mutex_init(lock, name, key); diff --git a/kernel/locking/rwsem-xadd.c b/kernel/locking/rwsem-xadd.c index b77a6230bbf6..7190592c2645 100644 --- a/kernel/locking/rwsem-xadd.c +++ b/kernel/locking/rwsem-xadd.c @@ -84,7 +84,7 @@ void __init_rwsem(struct rw_semaphore *sem, const char *name, INIT_LIST_HEAD(&sem->wait_list); #ifdef CONFIG_SMP sem->owner = NULL; - atomic_set(&sem->osq.tail, OSQ_UNLOCKED_VAL); + osq_lock_init(&sem->osq); #endif } -- cgit v1.2.3 From 33ecd2083a9560fbc1ef1b1279ef3ecb4c012a4f Mon Sep 17 00:00:00 2001 From: Jason Low Date: Mon, 14 Jul 2014 10:27:51 -0700 Subject: locking/spinlocks/mcs: Micro-optimize osq_unlock() In the unlock function of the cancellable MCS spinlock, the first thing we do is to retrive the current CPU's osq node. However, due to the changes made in the previous patch, in the common case where the lock is not contended, we wouldn't need to access the current CPU's osq node anymore. This patch optimizes this by only retriving this CPU's osq node after we attempt the initial cmpxchg to unlock the osq and found that its contended. Signed-off-by: Jason Low Signed-off-by: Peter Zijlstra Cc: Scott Norton Cc: "Paul E. McKenney" Cc: Dave Chinner Cc: Waiman Long Cc: Davidlohr Bueso Cc: Rik van Riel Cc: Andrew Morton Cc: "H. Peter Anvin" Cc: Steven Rostedt Cc: Tim Chen Cc: Konrad Rzeszutek Wilk Cc: Aswin Chandramouleeswaran Cc: Linus Torvalds Link: http://lkml.kernel.org/r/1405358872-3732-5-git-send-email-jason.low2@hp.com Signed-off-by: Ingo Molnar --- kernel/locking/mcs_spinlock.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/locking/mcs_spinlock.c b/kernel/locking/mcs_spinlock.c index 32fc16c0a545..be9ee1559fca 100644 --- a/kernel/locking/mcs_spinlock.c +++ b/kernel/locking/mcs_spinlock.c @@ -182,8 +182,7 @@ unqueue: void osq_unlock(struct optimistic_spin_queue *lock) { - struct optimistic_spin_node *node = this_cpu_ptr(&osq_node); - struct optimistic_spin_node *next; + struct optimistic_spin_node *node, *next; int curr = encode_cpu(smp_processor_id()); /* @@ -195,6 +194,7 @@ void osq_unlock(struct optimistic_spin_queue *lock) /* * Second most likely case. */ + node = this_cpu_ptr(&osq_node); next = xchg(&node->next, NULL); if (next) { ACCESS_ONCE(next->locked) = 1; -- cgit v1.2.3 From b0ab99e7736af88b8ac1b7ae50ea287fffa2badc Mon Sep 17 00:00:00 2001 From: Mateusz Guzik Date: Sat, 14 Jun 2014 15:00:09 +0200 Subject: sched: Fix possible divide by zero in avg_atom() calculation proc_sched_show_task() does: if (nr_switches) do_div(avg_atom, nr_switches); nr_switches is unsigned long and do_div truncates it to 32 bits, which means it can test non-zero on e.g. x86-64 and be truncated to zero for division. Fix the problem by using div64_ul() instead. As a side effect calculations of avg_atom for big nr_switches are now correct. Signed-off-by: Mateusz Guzik Signed-off-by: Peter Zijlstra Cc: stable@vger.kernel.org Cc: Linus Torvalds Link: http://lkml.kernel.org/r/1402750809-31991-1-git-send-email-mguzik@redhat.com Signed-off-by: Ingo Molnar --- kernel/sched/debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/debug.c b/kernel/sched/debug.c index 695f9773bb60..627b3c34b821 100644 --- a/kernel/sched/debug.c +++ b/kernel/sched/debug.c @@ -608,7 +608,7 @@ void proc_sched_show_task(struct task_struct *p, struct seq_file *m) avg_atom = p->se.sum_exec_runtime; if (nr_switches) - do_div(avg_atom, nr_switches); + avg_atom = div64_ul(avg_atom, nr_switches); else avg_atom = -1LL; -- cgit v1.2.3 From 4cf465b579c20bee868464f5d664f8d2d96cd370 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 16 Jul 2014 13:28:34 +0200 Subject: ACPI / video: Add use_native_backlight quirk for HP ProBook 4540s As reported here: https://bugzilla.redhat.com/show_bug.cgi?id=1025690 This is yet another model which needs this quirk. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1025690 Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 29649c194886..350d52a8f781 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -581,6 +581,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { }, { .callback = video_set_use_native_backlight, + .ident = "HP ProBook 4540s", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_VERSION, "HP ProBook 4540s"), + }, + }, + { + .callback = video_set_use_native_backlight, .ident = "HP ProBook 2013 models", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), -- cgit v1.2.3 From 97d496bf1a7934c77f8bb0de9b773dd759def616 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 12 Jul 2014 11:43:33 +0200 Subject: cpufreq: sa1110: set memory type for h3600 The Compaq iPAQ h3600 also has the K4S281632b-1H memory type. Verified by prying apart a broken board. Signed-off-by: Linus Walleij Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/sa1110-cpufreq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/sa1110-cpufreq.c b/drivers/cpufreq/sa1110-cpufreq.c index 546376719d8f..b5befc211172 100644 --- a/drivers/cpufreq/sa1110-cpufreq.c +++ b/drivers/cpufreq/sa1110-cpufreq.c @@ -349,7 +349,7 @@ static int __init sa1110_clk_init(void) name = "K4S641632D"; if (machine_is_h3100()) name = "KM416S4030CT"; - if (machine_is_jornada720()) + if (machine_is_jornada720() || machine_is_h3600()) name = "K4S281632B-1H"; if (machine_is_nanoengine()) name = "MT48LC8M16A2TG-75"; -- cgit v1.2.3 From 7e02168711e70a93a4795870e028a260702bdcb5 Mon Sep 17 00:00:00 2001 From: Nicolas Del Piano Date: Sun, 13 Jul 2014 18:59:00 -0300 Subject: cpufreq: imx6q: Select PM_OPP PM_OPP is a library used by several of the existing cpufreq drivers. ARM IMX6Q cpufreq driver uses this library for its functionality. Thus, it should be selected in Kconfig. Reported-by: Ezequiel Garcia Signed-off-by: Nicolas Del Piano Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/Kconfig.arm | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index ebac67115009..8c5cf4bdeab8 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -104,6 +104,7 @@ config ARM_IMX6Q_CPUFREQ tristate "Freescale i.MX6 cpufreq support" depends on ARCH_MXC depends on REGULATOR_ANATOP + select PM_OPP help This adds cpufreq driver support for Freescale i.MX6 series SoCs. -- cgit v1.2.3 From 13b9a962a2594ee880c5d50d7f70964da1d4fe5a Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 16 Jul 2014 14:54:55 +0200 Subject: locking/rwsem: Rename 'activity' to 'count' There are two definitions of struct rw_semaphore, one in linux/rwsem.h and one in linux/rwsem-spinlock.h. For some reason they have different names for the initial field. This makes it impossible to use C99 named initialization for __RWSEM_INITIALIZER() -- or we have to duplicate that entire thing along with the structure definitions. The simpler patch is renaming the rwsem-spinlock variant to match the regular rwsem. This allows us to switch to C99 named initialization. Signed-off-by: Peter Zijlstra Cc: Linus Torvalds Link: http://lkml.kernel.org/n/tip-bmrZolsbGmautmzrerog27io@git.kernel.org Signed-off-by: Ingo Molnar --- include/linux/rwsem-spinlock.h | 8 ++++---- kernel/locking/rwsem-spinlock.c | 28 ++++++++++++++-------------- 2 files changed, 18 insertions(+), 18 deletions(-) diff --git a/include/linux/rwsem-spinlock.h b/include/linux/rwsem-spinlock.h index d5b13bc07a0b..561e8615528d 100644 --- a/include/linux/rwsem-spinlock.h +++ b/include/linux/rwsem-spinlock.h @@ -15,13 +15,13 @@ #ifdef __KERNEL__ /* * the rw-semaphore definition - * - if activity is 0 then there are no active readers or writers - * - if activity is +ve then that is the number of active readers - * - if activity is -1 then there is one active writer + * - if count is 0 then there are no active readers or writers + * - if count is +ve then that is the number of active readers + * - if count is -1 then there is one active writer * - if wait_list is not empty, then there are processes waiting for the semaphore */ struct rw_semaphore { - __s32 activity; + __s32 count; raw_spinlock_t wait_lock; struct list_head wait_list; #ifdef CONFIG_DEBUG_LOCK_ALLOC diff --git a/kernel/locking/rwsem-spinlock.c b/kernel/locking/rwsem-spinlock.c index 9be8a9144978..2c93571162cb 100644 --- a/kernel/locking/rwsem-spinlock.c +++ b/kernel/locking/rwsem-spinlock.c @@ -26,7 +26,7 @@ int rwsem_is_locked(struct rw_semaphore *sem) unsigned long flags; if (raw_spin_trylock_irqsave(&sem->wait_lock, flags)) { - ret = (sem->activity != 0); + ret = (sem->count != 0); raw_spin_unlock_irqrestore(&sem->wait_lock, flags); } return ret; @@ -46,7 +46,7 @@ void __init_rwsem(struct rw_semaphore *sem, const char *name, debug_check_no_locks_freed((void *)sem, sizeof(*sem)); lockdep_init_map(&sem->dep_map, name, key, 0); #endif - sem->activity = 0; + sem->count = 0; raw_spin_lock_init(&sem->wait_lock); INIT_LIST_HEAD(&sem->wait_list); } @@ -95,7 +95,7 @@ __rwsem_do_wake(struct rw_semaphore *sem, int wakewrite) waiter = list_entry(next, struct rwsem_waiter, list); } while (waiter->type != RWSEM_WAITING_FOR_WRITE); - sem->activity += woken; + sem->count += woken; out: return sem; @@ -126,9 +126,9 @@ void __sched __down_read(struct rw_semaphore *sem) raw_spin_lock_irqsave(&sem->wait_lock, flags); - if (sem->activity >= 0 && list_empty(&sem->wait_list)) { + if (sem->count >= 0 && list_empty(&sem->wait_list)) { /* granted */ - sem->activity++; + sem->count++; raw_spin_unlock_irqrestore(&sem->wait_lock, flags); goto out; } @@ -170,9 +170,9 @@ int __down_read_trylock(struct rw_semaphore *sem) raw_spin_lock_irqsave(&sem->wait_lock, flags); - if (sem->activity >= 0 && list_empty(&sem->wait_list)) { + if (sem->count >= 0 && list_empty(&sem->wait_list)) { /* granted */ - sem->activity++; + sem->count++; ret = 1; } @@ -206,7 +206,7 @@ void __sched __down_write_nested(struct rw_semaphore *sem, int subclass) * itself into sleep and waiting for system woke it or someone * else in the head of the wait list up. */ - if (sem->activity == 0) + if (sem->count == 0) break; set_task_state(tsk, TASK_UNINTERRUPTIBLE); raw_spin_unlock_irqrestore(&sem->wait_lock, flags); @@ -214,7 +214,7 @@ void __sched __down_write_nested(struct rw_semaphore *sem, int subclass) raw_spin_lock_irqsave(&sem->wait_lock, flags); } /* got the lock */ - sem->activity = -1; + sem->count = -1; list_del(&waiter.list); raw_spin_unlock_irqrestore(&sem->wait_lock, flags); @@ -235,9 +235,9 @@ int __down_write_trylock(struct rw_semaphore *sem) raw_spin_lock_irqsave(&sem->wait_lock, flags); - if (sem->activity == 0) { + if (sem->count == 0) { /* got the lock */ - sem->activity = -1; + sem->count = -1; ret = 1; } @@ -255,7 +255,7 @@ void __up_read(struct rw_semaphore *sem) raw_spin_lock_irqsave(&sem->wait_lock, flags); - if (--sem->activity == 0 && !list_empty(&sem->wait_list)) + if (--sem->count == 0 && !list_empty(&sem->wait_list)) sem = __rwsem_wake_one_writer(sem); raw_spin_unlock_irqrestore(&sem->wait_lock, flags); @@ -270,7 +270,7 @@ void __up_write(struct rw_semaphore *sem) raw_spin_lock_irqsave(&sem->wait_lock, flags); - sem->activity = 0; + sem->count = 0; if (!list_empty(&sem->wait_list)) sem = __rwsem_do_wake(sem, 1); @@ -287,7 +287,7 @@ void __downgrade_write(struct rw_semaphore *sem) raw_spin_lock_irqsave(&sem->wait_lock, flags); - sem->activity = 1; + sem->count = 1; if (!list_empty(&sem->wait_list)) sem = __rwsem_do_wake(sem, 0); -- cgit v1.2.3 From ce069fc920e5734558b3d9cbef1ab06cf01ee793 Mon Sep 17 00:00:00 2001 From: Jason Low Date: Mon, 14 Jul 2014 10:27:52 -0700 Subject: locking/rwsem: Reduce the size of struct rw_semaphore Recent optimistic spinning additions to rwsem provide significant performance benefits on many workloads on large machines. The cost of it was increasing the size of the rwsem structure by up to 128 bits. However, now that the previous patches in this series bring the overhead of struct optimistic_spin_queue to 32 bits, this patch reorders some fields in struct rw_semaphore such that we can reduce the overhead of the rwsem structure by 64 bits (on 64 bit systems). The extra overhead required for rwsem optimistic spinning would now be up to 8 additional bytes instead of up to 16 bytes. Additionally, the size of rwsem would now be more in line with mutexes. Signed-off-by: Jason Low Signed-off-by: Peter Zijlstra Cc: Scott Norton Cc: "Paul E. McKenney" Cc: Dave Chinner Cc: Waiman Long Cc: Davidlohr Bueso Cc: Rik van Riel Cc: Andrew Morton Cc: "H. Peter Anvin" Cc: Steven Rostedt Cc: Tim Chen Cc: Konrad Rzeszutek Wilk Cc: Aswin Chandramouleeswaran Cc: Linus Torvalds Cc: Chris Mason Cc: Josef Bacik Link: http://lkml.kernel.org/r/1405358872-3732-6-git-send-email-jason.low2@hp.com Signed-off-by: Ingo Molnar --- include/linux/rwsem.h | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h index 25cd9aa2f3d7..716807f0eb2d 100644 --- a/include/linux/rwsem.h +++ b/include/linux/rwsem.h @@ -24,15 +24,15 @@ struct rw_semaphore; /* All arch specific implementations share the same struct */ struct rw_semaphore { long count; - raw_spinlock_t wait_lock; struct list_head wait_list; + raw_spinlock_t wait_lock; #ifdef CONFIG_SMP + struct optimistic_spin_queue osq; /* spinner MCS lock */ /* * Write owner. Used as a speculative check to see * if the owner is running on the cpu. */ struct task_struct *owner; - struct optimistic_spin_queue osq; /* spinner MCS lock */ #endif #ifdef CONFIG_DEBUG_LOCK_ALLOC struct lockdep_map dep_map; @@ -64,21 +64,18 @@ static inline int rwsem_is_locked(struct rw_semaphore *sem) #endif #if defined(CONFIG_SMP) && !defined(CONFIG_RWSEM_GENERIC_SPINLOCK) -#define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, \ - __RAW_SPIN_LOCK_UNLOCKED(name.wait_lock), \ - LIST_HEAD_INIT((name).wait_list), \ - NULL, /* owner */ \ - OSQ_LOCK_UNLOCKED /* osq */ \ - __RWSEM_DEP_MAP_INIT(name) } +#define __RWSEM_OPT_INIT(lockname) , .osq = OSQ_LOCK_UNLOCKED, .owner = NULL #else -#define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, \ - __RAW_SPIN_LOCK_UNLOCKED(name.wait_lock), \ - LIST_HEAD_INIT((name).wait_list) \ - __RWSEM_DEP_MAP_INIT(name) } +#define __RWSEM_OPT_INIT(lockname) #endif +#define __RWSEM_INITIALIZER(name) \ + { .count = RWSEM_UNLOCKED_VALUE, \ + .wait_list = LIST_HEAD_INIT((name).wait_list), \ + .wait_lock = __RAW_SPIN_LOCK_UNLOCKED(name.wait_lock) \ + __RWSEM_OPT_INIT(name) \ + __RWSEM_DEP_MAP_INIT(name) } + #define DECLARE_RWSEM(name) \ struct rw_semaphore name = __RWSEM_INITIALIZER(name) -- cgit v1.2.3 From 4badad352a6bb202ec68afa7a574c0bb961e5ebc Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 6 Jun 2014 19:53:16 +0200 Subject: locking/mutex: Disable optimistic spinning on some architectures The optimistic spin code assumes regular stores and cmpxchg() play nice; this is found to not be true for at least: parisc, sparc32, tile32, metag-lock1, arc-!llsc and hexagon. There is further wreckage, but this in particular seemed easy to trigger, so blacklist this. Opt in for known good archs. Signed-off-by: Peter Zijlstra Reported-by: Mikulas Patocka Cc: David Miller Cc: Chris Metcalf Cc: James Bottomley Cc: Vineet Gupta Cc: Jason Low Cc: Waiman Long Cc: "James E.J. Bottomley" Cc: Paul McKenney Cc: John David Anglin Cc: James Hogan Cc: Linus Torvalds Cc: Davidlohr Bueso Cc: stable@vger.kernel.org Cc: Benjamin Herrenschmidt Cc: Catalin Marinas Cc: Russell King Cc: Will Deacon Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/20140606175316.GV13930@laptop.programming.kicks-ass.net Signed-off-by: Ingo Molnar --- arch/arm/Kconfig | 1 + arch/arm64/Kconfig | 1 + arch/powerpc/Kconfig | 1 + arch/sparc/Kconfig | 1 + arch/x86/Kconfig | 1 + kernel/Kconfig.locks | 5 ++++- 6 files changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 245058b3b0ef..88acf8bc1490 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -6,6 +6,7 @@ config ARM select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_HAVE_CUSTOM_GPIO_H select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_SUPPORTS_ATOMIC_RMW select ARCH_USE_BUILTIN_BSWAP select ARCH_USE_CMPXCHG_LOCKREF select ARCH_WANT_IPC_PARSE_VERSION diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index a474de346be6..839f48c26ef0 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -4,6 +4,7 @@ config ARM64 select ARCH_HAS_OPP select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_USE_CMPXCHG_LOCKREF + select ARCH_SUPPORTS_ATOMIC_RMW select ARCH_WANT_OPTIONAL_GPIOLIB select ARCH_WANT_COMPAT_IPC_PARSE_VERSION select ARCH_WANT_FRAME_POINTERS diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index fefe7c8bf05f..80b94b0add1f 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -145,6 +145,7 @@ config PPC select HAVE_IRQ_EXIT_ON_IRQ_STACK select ARCH_USE_CMPXCHG_LOCKREF if PPC64 select HAVE_ARCH_AUDITSYSCALL + select ARCH_SUPPORTS_ATOMIC_RMW config GENERIC_CSUM def_bool CPU_LITTLE_ENDIAN diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 29f2e988c56a..407c87d9879a 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -78,6 +78,7 @@ config SPARC64 select HAVE_C_RECORDMCOUNT select NO_BOOTMEM select HAVE_ARCH_AUDITSYSCALL + select ARCH_SUPPORTS_ATOMIC_RMW config ARCH_DEFCONFIG string diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index a8f749ef0fdc..d24887b645dc 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -131,6 +131,7 @@ config X86 select HAVE_CC_STACKPROTECTOR select GENERIC_CPU_AUTOPROBE select HAVE_ARCH_AUDITSYSCALL + select ARCH_SUPPORTS_ATOMIC_RMW config INSTRUCTION_DECODER def_bool y diff --git a/kernel/Kconfig.locks b/kernel/Kconfig.locks index 35536d9c0964..81907941d921 100644 --- a/kernel/Kconfig.locks +++ b/kernel/Kconfig.locks @@ -220,9 +220,12 @@ config INLINE_WRITE_UNLOCK_IRQRESTORE endif +config ARCH_SUPPORTS_ATOMIC_RMW + bool + config MUTEX_SPIN_ON_OWNER def_bool y - depends on SMP && !DEBUG_MUTEXES + depends on SMP && !DEBUG_MUTEXES && ARCH_SUPPORTS_ATOMIC_RMW config ARCH_USE_QUEUE_RWLOCK bool -- cgit v1.2.3 From 5db6c6fefb1ca0e81e3bd6dd8998bf51c453d823 Mon Sep 17 00:00:00 2001 From: Davidlohr Bueso Date: Fri, 11 Jul 2014 14:00:06 -0700 Subject: locking/rwsem: Add CONFIG_RWSEM_SPIN_ON_OWNER Just like with mutexes (CONFIG_MUTEX_SPIN_ON_OWNER), encapsulate the dependencies for rwsem optimistic spinning. No logical changes here as it continues to depend on both SMP and the XADD algorithm variant. Signed-off-by: Davidlohr Bueso Acked-by: Jason Low [ Also make it depend on ARCH_SUPPORTS_ATOMIC_RMW. ] Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1405112406-13052-2-git-send-email-davidlohr@hp.com Cc: aswin@hp.com Cc: Chris Mason Cc: Davidlohr Bueso Cc: Josef Bacik Cc: Linus Torvalds Cc: Waiman Long Signed-off-by: Ingo Molnar Signed-off-by: Ingo Molnar --- include/linux/rwsem.h | 6 ++++-- kernel/Kconfig.locks | 4 ++++ kernel/locking/rwsem-xadd.c | 4 ++-- kernel/locking/rwsem.c | 2 +- 4 files changed, 11 insertions(+), 5 deletions(-) diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h index 716807f0eb2d..035d3c57fc8a 100644 --- a/include/linux/rwsem.h +++ b/include/linux/rwsem.h @@ -14,7 +14,9 @@ #include #include #include +#ifdef CONFIG_RWSEM_SPIN_ON_OWNER #include +#endif struct rw_semaphore; @@ -26,7 +28,7 @@ struct rw_semaphore { long count; struct list_head wait_list; raw_spinlock_t wait_lock; -#ifdef CONFIG_SMP +#ifdef CONFIG_RWSEM_SPIN_ON_OWNER struct optimistic_spin_queue osq; /* spinner MCS lock */ /* * Write owner. Used as a speculative check to see @@ -63,7 +65,7 @@ static inline int rwsem_is_locked(struct rw_semaphore *sem) # define __RWSEM_DEP_MAP_INIT(lockname) #endif -#if defined(CONFIG_SMP) && !defined(CONFIG_RWSEM_GENERIC_SPINLOCK) +#ifdef CONFIG_RWSEM_SPIN_ON_OWNER #define __RWSEM_OPT_INIT(lockname) , .osq = OSQ_LOCK_UNLOCKED, .owner = NULL #else #define __RWSEM_OPT_INIT(lockname) diff --git a/kernel/Kconfig.locks b/kernel/Kconfig.locks index 81907941d921..76768ee812b2 100644 --- a/kernel/Kconfig.locks +++ b/kernel/Kconfig.locks @@ -227,6 +227,10 @@ config MUTEX_SPIN_ON_OWNER def_bool y depends on SMP && !DEBUG_MUTEXES && ARCH_SUPPORTS_ATOMIC_RMW +config RWSEM_SPIN_ON_OWNER + def_bool y + depends on SMP && RWSEM_XCHGADD_ALGORITHM && ARCH_SUPPORTS_ATOMIC_RMW + config ARCH_USE_QUEUE_RWLOCK bool diff --git a/kernel/locking/rwsem-xadd.c b/kernel/locking/rwsem-xadd.c index 7190592c2645..a2391ac135c8 100644 --- a/kernel/locking/rwsem-xadd.c +++ b/kernel/locking/rwsem-xadd.c @@ -82,7 +82,7 @@ void __init_rwsem(struct rw_semaphore *sem, const char *name, sem->count = RWSEM_UNLOCKED_VALUE; raw_spin_lock_init(&sem->wait_lock); INIT_LIST_HEAD(&sem->wait_list); -#ifdef CONFIG_SMP +#ifdef CONFIG_RWSEM_SPIN_ON_OWNER sem->owner = NULL; osq_lock_init(&sem->osq); #endif @@ -262,7 +262,7 @@ static inline bool rwsem_try_write_lock(long count, struct rw_semaphore *sem) return false; } -#ifdef CONFIG_SMP +#ifdef CONFIG_RWSEM_SPIN_ON_OWNER /* * Try to acquire write lock before the writer has been put on wait queue. */ diff --git a/kernel/locking/rwsem.c b/kernel/locking/rwsem.c index 42f806de49d4..e2d3bc7f03b4 100644 --- a/kernel/locking/rwsem.c +++ b/kernel/locking/rwsem.c @@ -12,7 +12,7 @@ #include -#if defined(CONFIG_SMP) && defined(CONFIG_RWSEM_XCHGADD_ALGORITHM) +#ifdef CONFIG_RWSEM_SPIN_ON_OWNER static inline void rwsem_set_owner(struct rw_semaphore *sem) { sem->owner = current; -- cgit v1.2.3 From 2fa1adc07089020984d52bb55c5af0b9d86dff21 Mon Sep 17 00:00:00 2001 From: Quentin Armitage Date: Thu, 10 Jul 2014 11:15:55 +0100 Subject: cpufreq: kirkwood: Reinstate cpufreq driver for ARCH_KIRKWOOD Commit ff1f0018cf66080d8e6f59791e552615648a033a ("drivers: Enable building of Kirkwood drivers for mach-mvebu") added Kirkwood into mach-mvebu, adding MACH_KIRKWOOD to ARCH_KIRKWOOD in the KConfig files. The change for ARM_KIRKWOOD_CPUFREQ replaced ARCH_KIRKWOOD with MACH_KIRKWOOD, whereas all the other changes were ARCH_KIRKWOOD || MACH_KIRKWOOD. As a consequence of this change, the cpufreq driver is no longer enabled for ARCH_KIRKWOOD. This patch reinstates ARM_KIRKWOOD_CPUFREQ for ARCH_KIRKWOOD. Signed-off-by: Quentin Armitage Acked-by: Andrew Lunn Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/Kconfig.arm | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 8c5cf4bdeab8..7364a538e056 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -119,7 +119,7 @@ config ARM_INTEGRATOR If in doubt, say Y. config ARM_KIRKWOOD_CPUFREQ - def_bool MACH_KIRKWOOD + def_bool ARCH_KIRKWOOD || MACH_KIRKWOOD help This adds the CPUFreq driver for Marvell Kirkwood SoCs. -- cgit v1.2.3 From 1bf8cc3d017575a38d4361f56ccc0a670a16bcd9 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 11 Jul 2014 20:24:19 +0530 Subject: cpufreq: cpu0: OPPs can be populated at runtime OPPs can be populated statically, via DT, or added at run time with dev_pm_opp_add(). While this driver handles the first case correctly, it would fail to populate OPPs added at runtime. Because call to of_init_opp_table() would fail as there are no OPPs in DT and probe will return early. To fix this, remove error checking and call dev_pm_opp_init_cpufreq_table() unconditionally. Update bindings as well. Suggested-by: Stephen Boyd Tested-by: Stephen Boyd Signed-off-by: Viresh Kumar Acked-by: Santosh Shilimkar Signed-off-by: Rafael J. Wysocki --- Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt | 6 ++++-- drivers/cpufreq/cpufreq-cpu0.c | 7 ++----- 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt index f055515d2b62..366690cb86a3 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt @@ -8,10 +8,12 @@ Both required and optional properties listed below must be defined under node /cpus/cpu@0. Required properties: -- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt - for details +- None Optional properties: +- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt for + details. OPPs *must* be supplied either via DT, i.e. this property, or + populated at runtime. - clock-latency: Specify the possible maximum transition latency for clock, in unit of nanoseconds. - voltage-tolerance: Specify the CPU voltage tolerance in percentage. diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index ee1ae303a07c..86beda9f950b 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -152,11 +152,8 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) goto out_put_reg; } - ret = of_init_opp_table(cpu_dev); - if (ret) { - pr_err("failed to init OPP table: %d\n", ret); - goto out_put_clk; - } + /* OPPs might be populated at runtime, don't check for error here */ + of_init_opp_table(cpu_dev); ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); if (ret) { -- cgit v1.2.3 From fbb60fe35ad579b511de8604b06a30b43846473b Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Mon, 12 May 2014 16:35:39 +0800 Subject: drm/qxl: return IRQ_NONE if it was not our irq Return IRQ_NONE if it was not our irq. This is necessary for the case when qxl is sharing irq line with a device A in a crash kernel. If qxl is initialized before A and A's irq was raised during this gap, returning IRQ_HANDLED in this case will cause this irq to be raised again after EOI since kernel think it was handled but in fact it was not. Cc: Gerd Hoffmann Cc: stable@vger.kernel.org Signed-off-by: Jason Wang Signed-off-by: Dave Airlie --- drivers/gpu/drm/qxl/qxl_irq.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/qxl/qxl_irq.c b/drivers/gpu/drm/qxl/qxl_irq.c index 34d6a85e9023..0bf1e20c6e44 100644 --- a/drivers/gpu/drm/qxl/qxl_irq.c +++ b/drivers/gpu/drm/qxl/qxl_irq.c @@ -33,6 +33,9 @@ irqreturn_t qxl_irq_handler(int irq, void *arg) pending = xchg(&qdev->ram_header->int_pending, 0); + if (!pending) + return IRQ_NONE; + atomic_inc(&qdev->irq_received); if (pending & QXL_INTERRUPT_DISPLAY) { -- cgit v1.2.3 From de12d6f4b10b21854441f5242dcb29ea96181e58 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 16 Jul 2014 17:40:31 -0700 Subject: hwmon: (adt7470) Fix writes to temperature limit registers Temperature limit registers are signed. Limits therefore need to be clamped to (-128, 127) degrees C and not to (0, 255) degrees C. Without this fix, writing a limit of 128 degrees C sets the actual limit to -128 degrees C. Signed-off-by: Guenter Roeck Cc: stable@vger.kernel.org Reviewed-by: Axel Lin --- drivers/hwmon/adt7470.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index 0f4dea5ccf17..9ee3913850d6 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -515,7 +515,7 @@ static ssize_t set_temp_min(struct device *dev, return -EINVAL; temp = DIV_ROUND_CLOSEST(temp, 1000); - temp = clamp_val(temp, 0, 255); + temp = clamp_val(temp, -128, 127); mutex_lock(&data->lock); data->temp_min[attr->index] = temp; @@ -549,7 +549,7 @@ static ssize_t set_temp_max(struct device *dev, return -EINVAL; temp = DIV_ROUND_CLOSEST(temp, 1000); - temp = clamp_val(temp, 0, 255); + temp = clamp_val(temp, -128, 127); mutex_lock(&data->lock); data->temp_max[attr->index] = temp; @@ -826,7 +826,7 @@ static ssize_t set_pwm_tmin(struct device *dev, return -EINVAL; temp = DIV_ROUND_CLOSEST(temp, 1000); - temp = clamp_val(temp, 0, 255); + temp = clamp_val(temp, -128, 127); mutex_lock(&data->lock); data->pwm_tmin[attr->index] = temp; -- cgit v1.2.3 From 652c1a05171695d21b84dd3a723606b50eeb80fd Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Wed, 25 Jun 2014 16:44:14 +0300 Subject: IB/mlx5: Enable "block multicast loopback" for kernel consumers In commit f360d88a2efd, we advertise blocking multicast loopback to both kernel and userspace consumers, but don't allow kernel consumers (e.g IPoIB) to use it with their UD QPs. Fix that. Fixes: f360d88a2efd ("IB/mlx5: Add block multicast loopback support") Reported-by: Haggai Eran Signed-off-by: Eli Cohen Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx5/qp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index d13ddf1c0033..bbbcf389272c 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -675,7 +675,7 @@ static int create_kernel_qp(struct mlx5_ib_dev *dev, int err; uuari = &dev->mdev.priv.uuari; - if (init_attr->create_flags & ~IB_QP_CREATE_SIGNATURE_EN) + if (init_attr->create_flags & ~(IB_QP_CREATE_SIGNATURE_EN | IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK)) return -EINVAL; if (init_attr->qp_type == MLX5_IB_QPT_REG_UMR) -- cgit v1.2.3 From 92c14bd9477a20a83144f08c0ca25b0308bf0730 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 17 Jul 2014 10:48:25 +0530 Subject: cpufreq: move policy kobj to policy->cpu at resume This is only relevant to implementations with multiple clusters, where clusters have separate clock lines but all CPUs within a cluster share it. Consider a dual cluster platform with 2 cores per cluster. During suspend we start hot unplugging CPUs in order 1 to 3. When CPU2 is removed, policy->kobj would be moved to CPU3 and when CPU3 goes down we wouldn't free policy or its kobj as we want to retain permissions/values/etc. Now on resume, we will get CPU2 before CPU3 and will call __cpufreq_add_dev(). We will recover the old policy and update policy->cpu from 3 to 2 from update_policy_cpu(). But the kobj is still tied to CPU3 and isn't moved to CPU2. We wouldn't create a link for CPU2, but would try that for CPU3 while bringing it online. Which will report errors as CPU3 already has kobj assigned to it. This bug got introduced with commit 42f921a, which overlooked this scenario. To fix this, lets move kobj to the new policy->cpu while bringing first CPU of a cluster back. Also do a WARN_ON() if kobject_move failed, as we would reach here only for the first CPU of a non-boot cluster. And we can't recover from this situation, if kobject_move() fails. Fixes: 42f921a6f10c (cpufreq: remove sysfs files for CPUs which failed to come back after resume) Cc: 3.13+ # 3.13+ Reported-and-tested-by: Bu Yitian Reported-by: Saravana Kannan Reviewed-by: Srivatsa S. Bhat Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 62259d27f03e..6f024852c6fb 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1153,10 +1153,12 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif) * the creation of a brand new one. So we need to perform this update * by invoking update_policy_cpu(). */ - if (recover_policy && cpu != policy->cpu) + if (recover_policy && cpu != policy->cpu) { update_policy_cpu(policy, cpu); - else + WARN_ON(kobject_move(&policy->kobj, &dev->kobj)); + } else { policy->cpu = cpu; + } cpumask_copy(policy->cpus, cpumask_of(cpu)); -- cgit v1.2.3 From 144cb08864ed44be52d8634ac69cd98e5efcf527 Mon Sep 17 00:00:00 2001 From: Suravee Suthikulpanit Date: Tue, 15 Jul 2014 00:03:03 +0200 Subject: irqchip: gic: Add binding probe for ARM GIC400 Commit 3ab72f9156bb "dt-bindings: add GIC-400 binding" added the "arm,gic-400" compatible string, but the corresponding IRQCHIP_DECLARE was never added to the gic driver. Therefore add the missing irqchip declaration for it. Signed-off-by: Suravee Suthikulpanit Removed additional empty line and adapted commit message to mark it as fixing an issue. Signed-off-by: Heiko Stuebner Acked-by: Will Deacon Fixes: 3ab72f9156bb ("dt-bindings: add GIC-400 binding") Cc: # v3.14+ Link: https://lkml.kernel.org/r/2621565.f5eISveXXJ@diego Signed-off-by: Jason Cooper --- drivers/irqchip/irq-gic.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index aadd6f5723cb..66ed8922dab2 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -1071,6 +1071,7 @@ gic_of_init(struct device_node *node, struct device_node *parent) gic_cnt++; return 0; } +IRQCHIP_DECLARE(gic_400, "arm,gic-400", gic_of_init); IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init); IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init); IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init); -- cgit v1.2.3 From 0ac66effe7fcdee55bda6d5d10d3372c95a41920 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 14 Jul 2014 17:57:19 -0400 Subject: drm/radeon: avoid leaking edid data In some cases we fetch the edid in the detect() callback in order to determine what sort of monitor is connected. If that happens, don't fetch the edid again in the get_modes() callback or we will leak the edid. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_display.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 13896edcf0b6..65501af453be 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -830,6 +830,10 @@ int radeon_ddc_get_modes(struct radeon_connector *radeon_connector) struct radeon_device *rdev = dev->dev_private; int ret = 0; + /* don't leak the edid if we already fetched it in detect() */ + if (radeon_connector->edid) + goto got_edid; + /* on hw with routers, select right port */ if (radeon_connector->router.ddc_valid) radeon_router_select_ddc_port(radeon_connector); @@ -868,6 +872,7 @@ int radeon_ddc_get_modes(struct radeon_connector *radeon_connector) radeon_connector->edid = radeon_bios_get_hardcoded_edid(rdev); } if (radeon_connector->edid) { +got_edid: drm_mode_connector_update_edid_property(&radeon_connector->base, radeon_connector->edid); ret = drm_add_edid_modes(&radeon_connector->base, radeon_connector->edid); drm_edid_to_eld(&radeon_connector->base, radeon_connector->edid); -- cgit v1.2.3 From 201bb62402e0227375c655446ea04fcd0acf7287 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 15 Jul 2014 09:48:53 -0400 Subject: drm/radeon: set default bl level to something reasonable If the value in the scratch register is 0, set it to the max level. This fixes an issue where the console fb blanking code calls back into the backlight driver on unblank and then sets the backlight level to 0 after the driver has already set the mode and enabled the backlight. bugs: https://bugs.freedesktop.org/show_bug.cgi?id=81382 https://bugs.freedesktop.org/show_bug.cgi?id=70207 Signed-off-by: Alex Deucher Tested-by: David Heidelberger Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_encoders.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index 2b2908440644..7d68203a3737 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -183,7 +183,6 @@ void radeon_atom_backlight_init(struct radeon_encoder *radeon_encoder, struct backlight_properties props; struct radeon_backlight_privdata *pdata; struct radeon_encoder_atom_dig *dig; - u8 backlight_level; char bl_name[16]; /* Mac laptops with multiple GPUs use the gmux driver for backlight @@ -222,12 +221,17 @@ void radeon_atom_backlight_init(struct radeon_encoder *radeon_encoder, pdata->encoder = radeon_encoder; - backlight_level = radeon_atom_get_backlight_level_from_reg(rdev); - dig = radeon_encoder->enc_priv; dig->bl_dev = bd; bd->props.brightness = radeon_atom_backlight_get_brightness(bd); + /* Set a reasonable default here if the level is 0 otherwise + * fbdev will attempt to turn the backlight on after console + * unblanking and it will try and restore 0 which turns the backlight + * off again. + */ + if (bd->props.brightness == 0) + bd->props.brightness = RADEON_MAX_BL_LEVEL; bd->props.power = FB_BLANK_UNBLANK; backlight_update_status(bd); -- cgit v1.2.3 From f53f81b2576a9bd3af947e2b1c3a46dfab51c5ef Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Thu, 3 Jul 2014 03:45:02 +0200 Subject: drm/radeon: Prevent too early kms-pageflips triggered by vblank. Since 3.16-rc1 we have this new failure: When the userspace XOrg ddx schedules vblank events to trigger deferred kms-pageflips, e.g., via the OML_sync_control extension call glXSwapBuffersMscOML(), or if a glXSwapBuffers() is called immediately after completion of a previous swapbuffers call, e.g., in a tight rendering loop with minimal rendering, it happens frequently that the pageflip ioctl() is executed within the same vblank in which a previous kms-pageflip completed, or - for deferred swaps - always one vblank earlier than requested by the client app. This causes premature pageflips and detection of failure by the ddx, e.g., XOrg log warnings like... "(WW) RADEON(1): radeon_dri2_flip_event_handler: Pageflip completion event has impossible msc 201025 < target_msc 201026" ... and error/invalid return values of glXWaitForSbcOML() and Intel_swap_events extension. Reason is the new way in which kms-pageflips are programmed since 3.16. This commit changes the time window in which the hw can execute pending programmed pageflips. Before, a pending flip would get executed anywhere within the vblank interval. Now a pending flip only gets executed at the leading edge of vblank (start of front porch), making sure that a invocation of the pageflip ioctl() within a given vblank interval will only lead to pageflip completion in the following vblank. Tested to death on a DCE-4 card. Signed-off-by: Mario Kleiner Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/atombios_crtc.c | 8 ++++---- drivers/gpu/drm/radeon/evergreen.c | 5 +++-- drivers/gpu/drm/radeon/evergreen_reg.h | 1 - drivers/gpu/drm/radeon/rv515.c | 5 +++-- 4 files changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index a03c73411a56..30d242b25078 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1414,8 +1414,8 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc, tmp &= ~EVERGREEN_GRPH_SURFACE_UPDATE_H_RETRACE_EN; WREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp); - /* set pageflip to happen anywhere in vblank interval */ - WREG32(EVERGREEN_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0); + /* set pageflip to happen only at start of vblank interval (front porch) */ + WREG32(EVERGREEN_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 3); if (!atomic && fb && fb != crtc->primary->fb) { radeon_fb = to_radeon_framebuffer(fb); @@ -1614,8 +1614,8 @@ static int avivo_crtc_do_set_base(struct drm_crtc *crtc, tmp &= ~AVIVO_D1GRPH_SURFACE_UPDATE_H_RETRACE_EN; WREG32(AVIVO_D1GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp); - /* set pageflip to happen anywhere in vblank interval */ - WREG32(AVIVO_D1MODE_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0); + /* set pageflip to happen only at start of vblank interval (front porch) */ + WREG32(AVIVO_D1MODE_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 3); if (!atomic && fb && fb != crtc->primary->fb) { radeon_fb = to_radeon_framebuffer(fb); diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index f7ece0ff431b..250bac3935a4 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -2642,8 +2642,9 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s for (i = 0; i < rdev->num_crtc; i++) { if (save->crtc_enabled[i]) { tmp = RREG32(EVERGREEN_MASTER_UPDATE_MODE + crtc_offsets[i]); - if ((tmp & 0x3) != 0) { - tmp &= ~0x3; + if ((tmp & 0x7) != 3) { + tmp &= ~0x7; + tmp |= 0x3; WREG32(EVERGREEN_MASTER_UPDATE_MODE + crtc_offsets[i], tmp); } tmp = RREG32(EVERGREEN_GRPH_UPDATE + crtc_offsets[i]); diff --git a/drivers/gpu/drm/radeon/evergreen_reg.h b/drivers/gpu/drm/radeon/evergreen_reg.h index 333d143fca2c..23bff590fb6e 100644 --- a/drivers/gpu/drm/radeon/evergreen_reg.h +++ b/drivers/gpu/drm/radeon/evergreen_reg.h @@ -239,7 +239,6 @@ # define EVERGREEN_CRTC_V_BLANK (1 << 0) #define EVERGREEN_CRTC_STATUS_POSITION 0x6e90 #define EVERGREEN_CRTC_STATUS_HV_COUNT 0x6ea0 -#define EVERGREEN_MASTER_UPDATE_MODE 0x6ef8 #define EVERGREEN_CRTC_UPDATE_LOCK 0x6ed4 #define EVERGREEN_MASTER_UPDATE_LOCK 0x6ef4 #define EVERGREEN_MASTER_UPDATE_MODE 0x6ef8 diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 237dd29d9f1c..3e21e869015f 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -406,8 +406,9 @@ void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save) for (i = 0; i < rdev->num_crtc; i++) { if (save->crtc_enabled[i]) { tmp = RREG32(AVIVO_D1MODE_MASTER_UPDATE_MODE + crtc_offsets[i]); - if ((tmp & 0x3) != 0) { - tmp &= ~0x3; + if ((tmp & 0x7) != 3) { + tmp &= ~0x7; + tmp |= 0x3; WREG32(AVIVO_D1MODE_MASTER_UPDATE_MODE + crtc_offsets[i], tmp); } tmp = RREG32(AVIVO_D1GRPH_UPDATE + crtc_offsets[i]); -- cgit v1.2.3 From c60381bd82a54233bb46f93be00a4154bd0cf95d Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Mon, 14 Jul 2014 15:48:42 +0900 Subject: drm/radeon: Move pinning the BO back to radeon_crtc_page_flip() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As well as enabling the vblank interrupt. These shouldn't take any significant amount of time, but at least pinning the BO has actually been seen to fail in practice before, in which case we need to let userspace know about it. Reviewed-by: Christian König Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon.h | 3 +- drivers/gpu/drm/radeon/radeon_display.c | 181 ++++++++++++++++---------------- 2 files changed, 93 insertions(+), 91 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 29d9cc04c04e..b7204500a9a6 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -684,10 +684,9 @@ struct radeon_flip_work { struct work_struct unpin_work; struct radeon_device *rdev; int crtc_id; - struct drm_framebuffer *fb; + uint64_t base; struct drm_pending_vblank_event *event; struct radeon_bo *old_rbo; - struct radeon_bo *new_rbo; struct radeon_fence *fence; }; diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 65501af453be..8de579473645 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -386,11 +386,6 @@ static void radeon_flip_work_func(struct work_struct *__work) struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[work->crtc_id]; struct drm_crtc *crtc = &radeon_crtc->base; - struct drm_framebuffer *fb = work->fb; - - uint32_t tiling_flags, pitch_pixels; - uint64_t base; - unsigned long flags; int r; @@ -411,26 +406,94 @@ static void radeon_flip_work_func(struct work_struct *__work) radeon_fence_unref(&work->fence); } + /* do the flip (mmio) */ + radeon_page_flip(rdev, radeon_crtc->crtc_id, work->base); + + /* We borrow the event spin lock for protecting flip_status */ + spin_lock_irqsave(&crtc->dev->event_lock, flags); + + /* set the proper interrupt */ + radeon_irq_kms_pflip_irq_get(rdev, radeon_crtc->crtc_id); + + radeon_crtc->flip_status = RADEON_FLIP_SUBMITTED; + spin_unlock_irqrestore(&crtc->dev->event_lock, flags); + up_read(&rdev->exclusive_lock); + + return; + +cleanup: + drm_gem_object_unreference_unlocked(&work->old_rbo->gem_base); + radeon_fence_unref(&work->fence); + kfree(work); + up_read(&rdev->exclusive_lock); +} + +static int radeon_crtc_page_flip(struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_pending_vblank_event *event, + uint32_t page_flip_flags) +{ + struct drm_device *dev = crtc->dev; + struct radeon_device *rdev = dev->dev_private; + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); + struct radeon_framebuffer *old_radeon_fb; + struct radeon_framebuffer *new_radeon_fb; + struct drm_gem_object *obj; + struct radeon_flip_work *work; + struct radeon_bo *new_rbo; + uint32_t tiling_flags, pitch_pixels; + uint64_t base; + unsigned long flags; + int r; + + work = kzalloc(sizeof *work, GFP_KERNEL); + if (work == NULL) + return -ENOMEM; + + INIT_WORK(&work->flip_work, radeon_flip_work_func); + INIT_WORK(&work->unpin_work, radeon_unpin_work_func); + + work->rdev = rdev; + work->crtc_id = radeon_crtc->crtc_id; + work->event = event; + + /* schedule unpin of the old buffer */ + old_radeon_fb = to_radeon_framebuffer(crtc->primary->fb); + obj = old_radeon_fb->obj; + + /* take a reference to the old object */ + drm_gem_object_reference(obj); + work->old_rbo = gem_to_radeon_bo(obj); + + new_radeon_fb = to_radeon_framebuffer(fb); + obj = new_radeon_fb->obj; + new_rbo = gem_to_radeon_bo(obj); + + spin_lock(&new_rbo->tbo.bdev->fence_lock); + if (new_rbo->tbo.sync_obj) + work->fence = radeon_fence_ref(new_rbo->tbo.sync_obj); + spin_unlock(&new_rbo->tbo.bdev->fence_lock); + /* pin the new buffer */ - DRM_DEBUG_DRIVER("flip-ioctl() cur_fbo = %p, cur_bbo = %p\n", - work->old_rbo, work->new_rbo); + DRM_DEBUG_DRIVER("flip-ioctl() cur_rbo = %p, new_rbo = %p\n", + work->old_rbo, new_rbo); - r = radeon_bo_reserve(work->new_rbo, false); + r = radeon_bo_reserve(new_rbo, false); if (unlikely(r != 0)) { DRM_ERROR("failed to reserve new rbo buffer before flip\n"); goto cleanup; } /* Only 27 bit offset for legacy CRTC */ - r = radeon_bo_pin_restricted(work->new_rbo, RADEON_GEM_DOMAIN_VRAM, + r = radeon_bo_pin_restricted(new_rbo, RADEON_GEM_DOMAIN_VRAM, ASIC_IS_AVIVO(rdev) ? 0 : 1 << 27, &base); if (unlikely(r != 0)) { - radeon_bo_unreserve(work->new_rbo); + radeon_bo_unreserve(new_rbo); r = -EINVAL; DRM_ERROR("failed to pin new rbo buffer before flip\n"); goto cleanup; } - radeon_bo_get_tiling_flags(work->new_rbo, &tiling_flags, NULL); - radeon_bo_unreserve(work->new_rbo); + radeon_bo_get_tiling_flags(new_rbo, &tiling_flags, NULL); + radeon_bo_unreserve(new_rbo); if (!ASIC_IS_AVIVO(rdev)) { /* crtc offset is from display base addr not FB location */ @@ -467,6 +530,7 @@ static void radeon_flip_work_func(struct work_struct *__work) } base &= ~7; } + work->base = base; r = drm_vblank_get(crtc->dev, radeon_crtc->crtc_id); if (r) { @@ -477,100 +541,39 @@ static void radeon_flip_work_func(struct work_struct *__work) /* We borrow the event spin lock for protecting flip_work */ spin_lock_irqsave(&crtc->dev->event_lock, flags); - /* set the proper interrupt */ - radeon_irq_kms_pflip_irq_get(rdev, radeon_crtc->crtc_id); + if (radeon_crtc->flip_status != RADEON_FLIP_NONE) { + DRM_DEBUG_DRIVER("flip queue: crtc already busy\n"); + spin_unlock_irqrestore(&crtc->dev->event_lock, flags); + r = -EBUSY; + goto pflip_cleanup; + } + radeon_crtc->flip_status = RADEON_FLIP_PENDING; + radeon_crtc->flip_work = work; - /* do the flip (mmio) */ - radeon_page_flip(rdev, radeon_crtc->crtc_id, base); + /* update crtc fb */ + crtc->primary->fb = fb; - radeon_crtc->flip_status = RADEON_FLIP_SUBMITTED; spin_unlock_irqrestore(&crtc->dev->event_lock, flags); - up_read(&rdev->exclusive_lock); - return; + queue_work(radeon_crtc->flip_queue, &work->flip_work); + return 0; pflip_cleanup: - if (unlikely(radeon_bo_reserve(work->new_rbo, false) != 0)) { + if (unlikely(radeon_bo_reserve(new_rbo, false) != 0)) { DRM_ERROR("failed to reserve new rbo in error path\n"); goto cleanup; } - if (unlikely(radeon_bo_unpin(work->new_rbo) != 0)) { + if (unlikely(radeon_bo_unpin(new_rbo) != 0)) { DRM_ERROR("failed to unpin new rbo in error path\n"); } - radeon_bo_unreserve(work->new_rbo); + radeon_bo_unreserve(new_rbo); cleanup: drm_gem_object_unreference_unlocked(&work->old_rbo->gem_base); radeon_fence_unref(&work->fence); kfree(work); - up_read(&rdev->exclusive_lock); -} - -static int radeon_crtc_page_flip(struct drm_crtc *crtc, - struct drm_framebuffer *fb, - struct drm_pending_vblank_event *event, - uint32_t page_flip_flags) -{ - struct drm_device *dev = crtc->dev; - struct radeon_device *rdev = dev->dev_private; - struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); - struct radeon_framebuffer *old_radeon_fb; - struct radeon_framebuffer *new_radeon_fb; - struct drm_gem_object *obj; - struct radeon_flip_work *work; - unsigned long flags; - - work = kzalloc(sizeof *work, GFP_KERNEL); - if (work == NULL) - return -ENOMEM; - - INIT_WORK(&work->flip_work, radeon_flip_work_func); - INIT_WORK(&work->unpin_work, radeon_unpin_work_func); - work->rdev = rdev; - work->crtc_id = radeon_crtc->crtc_id; - work->fb = fb; - work->event = event; - - /* schedule unpin of the old buffer */ - old_radeon_fb = to_radeon_framebuffer(crtc->primary->fb); - obj = old_radeon_fb->obj; - - /* take a reference to the old object */ - drm_gem_object_reference(obj); - work->old_rbo = gem_to_radeon_bo(obj); - - new_radeon_fb = to_radeon_framebuffer(fb); - obj = new_radeon_fb->obj; - work->new_rbo = gem_to_radeon_bo(obj); - - spin_lock(&work->new_rbo->tbo.bdev->fence_lock); - if (work->new_rbo->tbo.sync_obj) - work->fence = radeon_fence_ref(work->new_rbo->tbo.sync_obj); - spin_unlock(&work->new_rbo->tbo.bdev->fence_lock); - - /* We borrow the event spin lock for protecting flip_work */ - spin_lock_irqsave(&crtc->dev->event_lock, flags); - - if (radeon_crtc->flip_status != RADEON_FLIP_NONE) { - DRM_DEBUG_DRIVER("flip queue: crtc already busy\n"); - spin_unlock_irqrestore(&crtc->dev->event_lock, flags); - drm_gem_object_unreference_unlocked(&work->old_rbo->gem_base); - radeon_fence_unref(&work->fence); - kfree(work); - return -EBUSY; - } - radeon_crtc->flip_status = RADEON_FLIP_PENDING; - radeon_crtc->flip_work = work; - - /* update crtc fb */ - crtc->primary->fb = fb; - - spin_unlock_irqrestore(&crtc->dev->event_lock, flags); - - queue_work(radeon_crtc->flip_queue, &work->flip_work); - - return 0; + return r; } static int -- cgit v1.2.3 From 306f98d9a1079cc78567b1a6a5e94c272c163e47 Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Mon, 14 Jul 2014 15:58:03 +0900 Subject: drm/radeon: Complete page flip even if waiting on the BO fence fails MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Otherwise the DRM core and userspace will be confused about which BO the CRTC is scanning out. Reviewed-by: Christian König Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_display.c | 24 +++++++++--------------- 1 file changed, 9 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 8de579473645..97ea46597bea 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -390,20 +390,22 @@ static void radeon_flip_work_func(struct work_struct *__work) int r; down_read(&rdev->exclusive_lock); - while (work->fence) { + if (work->fence) { r = radeon_fence_wait(work->fence, false); if (r == -EDEADLK) { up_read(&rdev->exclusive_lock); r = radeon_gpu_reset(rdev); down_read(&rdev->exclusive_lock); } + if (r) + DRM_ERROR("failed to wait on page flip fence (%d)!\n", r); - if (r) { - DRM_ERROR("failed to wait on page flip fence (%d)!\n", - r); - goto cleanup; - } else - radeon_fence_unref(&work->fence); + /* We continue with the page flip even if we failed to wait on + * the fence, otherwise the DRM core and userspace will be + * confused about which BO the CRTC is scanning out + */ + + radeon_fence_unref(&work->fence); } /* do the flip (mmio) */ @@ -418,14 +420,6 @@ static void radeon_flip_work_func(struct work_struct *__work) radeon_crtc->flip_status = RADEON_FLIP_SUBMITTED; spin_unlock_irqrestore(&crtc->dev->event_lock, flags); up_read(&rdev->exclusive_lock); - - return; - -cleanup: - drm_gem_object_unreference_unlocked(&work->old_rbo->gem_base); - radeon_fence_unref(&work->fence); - kfree(work); - up_read(&rdev->exclusive_lock); } static int radeon_crtc_page_flip(struct drm_crtc *crtc, -- cgit v1.2.3 From c89e5be621e84b7b83650d87a956c52c5654c35b Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Thu, 17 Jul 2014 01:27:25 +0200 Subject: drm/radeon: Remove redundant fence unref in pageflip path. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Not needed anymore, as it is already unreffed within radeon_flip_work_func() after its only use. Signed-off-by: Mario Kleiner Reviewed-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_display.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 97ea46597bea..bfa3a6cc170f 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -366,7 +366,6 @@ void radeon_crtc_handle_flip(struct radeon_device *rdev, int crtc_id) spin_unlock_irqrestore(&rdev->ddev->event_lock, flags); drm_vblank_put(rdev->ddev, radeon_crtc->crtc_id); - radeon_fence_unref(&work->fence); radeon_irq_kms_pflip_irq_put(rdev, work->crtc_id); queue_work(radeon_crtc->flip_queue, &work->unpin_work); } -- cgit v1.2.3 From 826484977c29b42c8cb8c42bd41acaa6e152a4bb Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Thu, 17 Jul 2014 01:37:53 +0200 Subject: drm/radeon: Add missing vblank_put in pageflip ioctl error path. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Mario Kleiner Reviewed-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_display.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index bfa3a6cc170f..0a22a1bb688c 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -538,7 +538,7 @@ static int radeon_crtc_page_flip(struct drm_crtc *crtc, DRM_DEBUG_DRIVER("flip queue: crtc already busy\n"); spin_unlock_irqrestore(&crtc->dev->event_lock, flags); r = -EBUSY; - goto pflip_cleanup; + goto vblank_cleanup; } radeon_crtc->flip_status = RADEON_FLIP_PENDING; radeon_crtc->flip_work = work; @@ -551,6 +551,9 @@ static int radeon_crtc_page_flip(struct drm_crtc *crtc, queue_work(radeon_crtc->flip_queue, &work->flip_work); return 0; +vblank_cleanup: + drm_vblank_put(crtc->dev, radeon_crtc->crtc_id); + pflip_cleanup: if (unlikely(radeon_bo_reserve(new_rbo, false) != 0)) { DRM_ERROR("failed to reserve new rbo in error path\n"); -- cgit v1.2.3 From 5f87e090a7368adc2290ae17ffd82a070caadd20 Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Thu, 17 Jul 2014 02:24:45 +0200 Subject: drm/radeon: Make classic pageflip completion path less racy. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Need to protect mmio flip programming by event lock as well. Need to also first enable pflip irq, then mmio program, otherwise a flip completion may get unnoticed in the vblank of actual completion if the flip is programmed, but radeon_flip_work_func gets preempted immediately after mmio programming and before vblank. In that case the vblank irq handler wouldn't run radeon_crtc_handle_vblank() with the completion check routine, miss the completed flip, and only notice one vblank after actual completion, causing a false/delayed report of flip completion. Signed-off-by: Mario Kleiner Reviewed-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_display.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 0a22a1bb688c..bf25061c8ac4 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -407,15 +407,15 @@ static void radeon_flip_work_func(struct work_struct *__work) radeon_fence_unref(&work->fence); } - /* do the flip (mmio) */ - radeon_page_flip(rdev, radeon_crtc->crtc_id, work->base); - /* We borrow the event spin lock for protecting flip_status */ spin_lock_irqsave(&crtc->dev->event_lock, flags); /* set the proper interrupt */ radeon_irq_kms_pflip_irq_get(rdev, radeon_crtc->crtc_id); + /* do the flip (mmio) */ + radeon_page_flip(rdev, radeon_crtc->crtc_id, work->base); + radeon_crtc->flip_status = RADEON_FLIP_SUBMITTED; spin_unlock_irqrestore(&crtc->dev->event_lock, flags); up_read(&rdev->exclusive_lock); -- cgit v1.2.3 From 953c66469735aed8d2ada639a72b150f01dae605 Mon Sep 17 00:00:00 2001 From: Abbas Raza Date: Thu, 17 Jul 2014 19:34:31 +0800 Subject: usb: chipidea: udc: Disable auto ZLP generation on ep0 There are 2 methods for ZLP (zero-length packet) generation: 1) In software 2) Automatic generation by device controller 1) is implemented in UDC driver and it attaches ZLP to IN packet if descriptor->size < wLength 2) can be enabled/disabled by setting ZLT bit in the QH When gadget ffs is connected to ubuntu host, the host sends get descriptor request and wLength in setup packet is 255 while the size of descriptor which will be sent by gadget in IN packet is 64 byte. So the composite driver sets req->zero = 1. In UDC driver following code will be executed then if (hwreq->req.zero && hwreq->req.length && (hwreq->req.length % hwep->ep.maxpacket == 0)) add_td_to_list(hwep, hwreq, 0); Case-A: So in case of ubuntu host, UDC driver will attach a ZLP to the IN packet. ubuntu host will request 255 byte in IN request, gadget will send 64 byte with ZLP and host will come to know that there is no more data. But hold on, by default ZLT=0 for endpoint 0 so hardware also tries to automatically generate the ZLP which blocks enumeration for ~6 seconds due to endpoint 0 STALL, NAKs are sent to host for any requests (OUT/PING) Case-B: In case when gadget ffs is connected to Apple device, Apple device sends setup packet with wLength=64. So descriptor->size = 64 and wLength=64 therefore req->zero = 0 and UDC driver will not attach any ZLP to the IN packet. Apple device requests 64 bytes, gets 64 bytes and doesn't further request for IN data. But ZLT=0 by default for endpoint 0 so hardware tries to automatically generate the ZLP which blocks enumeration for ~6 seconds due to endpoint 0 STALL, NAKs are sent to host for any requests (OUT/PING) According to USB2.0 specs: 8.5.3.2 Variable-length Data Stage A control pipe may have a variable-length data phase in which the host requests more data than is contained in the specified data structure. When all of the data structure is returned to the host, the function should indicate that the Data stage is ended by returning a packet that is shorter than the MaxPacketSize for the pipe. If the data structure is an exact multiple of wMaxPacketSize for the pipe, the function will return a zero-length packet to indicate the end of the Data stage. In Case-A mentioned above: If we disable software ZLP generation & ZLT=0 for endpoint 0 OR if software ZLP generation is not disabled but we set ZLT=1 for endpoint 0 then enumeration doesn't block for 6 seconds. In Case-B mentioned above: If we disable software ZLP generation & ZLT=0 for endpoint then enumeration still blocks due to ZLP automatically generated by hardware and host not needing it. But if we keep software ZLP generation enabled but we set ZLT=1 for endpoint 0 then enumeration doesn't block for 6 seconds. So the proper solution for this issue seems to disable automatic ZLP generation by hardware (i.e by setting ZLT=1 for endpoint 0) and let software (UDC driver) handle the ZLP generation based on req->zero field. Cc: stable@vger.kernel.org Signed-off-by: Abbas Raza Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/udc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 9d2b673f90e3..b8125aa64ad8 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1169,8 +1169,8 @@ static int ep_enable(struct usb_ep *ep, if (hwep->type == USB_ENDPOINT_XFER_CONTROL) cap |= QH_IOS; - if (hwep->num) - cap |= QH_ZLT; + + cap |= QH_ZLT; cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT; /* * For ISO-TX, we set mult at QH as the largest value, and use -- cgit v1.2.3 From bb86cf569bbd7ad4dce581a37c7fbd748057e9dc Mon Sep 17 00:00:00 2001 From: Gavin Guo Date: Fri, 18 Jul 2014 01:12:13 +0800 Subject: usb: Check if port status is equal to RxDetect When using USB 3.0 pen drive with the [AMD] FCH USB XHCI Controller [1022:7814], the second hotplugging will experience the USB 3.0 pen drive is recognized as high-speed device. After bisecting the kernel, I found the commit number 41e7e056cdc662f704fa9262e5c6e213b4ab45dd (USB: Allow USB 3.0 ports to be disabled.) causes the bug. After doing some experiments, the bug can be fixed by avoiding executing the function hub_usb3_port_disable(). Because the port status with [AMD] FCH USB XHCI Controlleris [1022:7814] is already in RxDetect (I tried printing out the port status before setting to Disabled state), it's reasonable to check the port status before really executing hub_usb3_port_disable(). Fixes: 41e7e056cdc6 (USB: Allow USB 3.0 ports to be disabled.) Signed-off-by: Gavin Guo Acked-by: Alan Stern Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 21b99b4b4082..0e950ad8cb25 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -889,6 +889,25 @@ static int hub_usb3_port_disable(struct usb_hub *hub, int port1) if (!hub_is_superspeed(hub->hdev)) return -EINVAL; + ret = hub_port_status(hub, port1, &portstatus, &portchange); + if (ret < 0) + return ret; + + /* + * USB controller Advanced Micro Devices, Inc. [AMD] FCH USB XHCI + * Controller [1022:7814] will have spurious result making the following + * usb 3.0 device hotplugging route to the 2.0 root hub and recognized + * as high-speed device if we set the usb 3.0 port link state to + * Disabled. Since it's already in USB_SS_PORT_LS_RX_DETECT state, we + * check the state here to avoid the bug. + */ + if ((portstatus & USB_PORT_STAT_LINK_STATE) == + USB_SS_PORT_LS_RX_DETECT) { + dev_dbg(&hub->ports[port1 - 1]->dev, + "Not disabling port; link state is RxDetect\n"); + return ret; + } + ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED); if (ret) return ret; -- cgit v1.2.3 From 2b1987a9f1e6250c962ca13820d3c69817879266 Mon Sep 17 00:00:00 2001 From: Brian W Hart Date: Fri, 27 Jun 2014 16:09:39 -0500 Subject: cpufreq: make table sentinel macros unsigned to match use MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 5eeaf1f18973 (cpufreq: Fix build error on some platforms that use cpufreq_for_each_*) moved function cpufreq_next_valid() to a public header. Warnings are now generated when objects including that header are built with -Wsign-compare (as an out-of-tree module might be): .../include/linux/cpufreq.h: In function ‘cpufreq_next_valid’: .../include/linux/cpufreq.h:519:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] while ((*pos)->frequency != CPUFREQ_TABLE_END) ^ .../include/linux/cpufreq.h:520:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if ((*pos)->frequency != CPUFREQ_ENTRY_INVALID) ^ Constants CPUFREQ_ENTRY_INVALID and CPUFREQ_TABLE_END are signed, but are used with unsigned member 'frequency' of cpufreq_frequency_table. Update the macro definitions to be explicitly unsigned to match their use. This also corrects potentially wrong behavior of clk_rate_table_iter() if unsigned long is wider than usigned int. Fixes: 5eeaf1f18973 (cpufreq: Fix build error on some platforms that use cpufreq_for_each_*) Signed-off-by: Brian W Hart Reviewed-by: Simon Horman Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- include/linux/cpufreq.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index ec4112d257bc..8f8ae95c6e27 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -482,8 +482,8 @@ extern struct cpufreq_governor cpufreq_gov_conservative; *********************************************************************/ /* Special Values of .frequency field */ -#define CPUFREQ_ENTRY_INVALID ~0 -#define CPUFREQ_TABLE_END ~1 +#define CPUFREQ_ENTRY_INVALID ~0u +#define CPUFREQ_TABLE_END ~1u /* Special Values of .flags field */ #define CPUFREQ_BOOST_FREQ (1 << 0) -- cgit v1.2.3 From 2ef82d24f445e82f80e235f44eb9d1bc933e3670 Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Wed, 16 Jul 2014 00:00:45 -0700 Subject: Drivers: hv: hv_fcopy: fix a race condition for SMP guest We should schedule the 5s "timer work" before starting the data transfer, otherwise, the data transfer code may finish so fast on another virtual cpu that when the code(fcopy_write()) trying to cancel the 5s "timer work" can occasionally fail because the "timer work" may haven't been scheduled yet and as a result the fcopy process will be aborted wrongly by fcopy_work_func() in 5s. Thank Liz Zhang for the initial investigation on the bug. This addresses https://bugzilla.redhat.com/show_bug.cgi?id=1118123 Tested-by: Liz Zhang Cc: Haiyang Zhang Cc: stable@vger.kernel.org Signed-off-by: Dexuan Cui Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv_fcopy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hv/hv_fcopy.c b/drivers/hv/hv_fcopy.c index eaaa3d843b80..23b2ce294c4c 100644 --- a/drivers/hv/hv_fcopy.c +++ b/drivers/hv/hv_fcopy.c @@ -246,8 +246,8 @@ void hv_fcopy_onchannelcallback(void *context) /* * Send the information to the user-level daemon. */ - fcopy_send_data(); schedule_delayed_work(&fcopy_work, 5*HZ); + fcopy_send_data(); return; } icmsghdr->icflags = ICMSGHDRFLAG_TRANSACTION | ICMSGHDRFLAG_RESPONSE; -- cgit v1.2.3 From 03e97220b99b8b691ea5b130b7b4c135c9662792 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Thu, 17 Jul 2014 12:20:14 +0200 Subject: ARM: clk-imx6q: parent lvds_sel input from upstream clock gates The i.MX6 reference manual doesn't make a clear distinction between the fixed clock divider and the enable gate for the pcie and sata reference clocks. This lead to the lvds mux inputs in the imx6q clk driver to be parented from the ref clock (which is the divider) instead of the actual gate, which in turn prevents the upstream clock to actually be enabled when lvds clk out is active. This fixes a hard machine hang regression in kernel 3.16 for boards where only pcie is active but no sata, as with this kernel version the imx6-pcie driver is no longer enabling the upstream clock directly but only lvds clk out. Reported-by: Arne Ruhnau Signed-off-by: Lucas Stach Tested-by: Arne Ruhnau Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 8e795dea02ec..8556c787e59c 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -70,7 +70,7 @@ static const char *cko_sels[] = { "cko1", "cko2", }; static const char *lvds_sels[] = { "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "pll4_audio", "pll5_video", "pll8_mlb", "enet_ref", - "pcie_ref", "sata_ref", + "pcie_ref_125m", "sata_ref_100m", }; enum mx6q_clks { @@ -491,7 +491,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) /* All existing boards with PCIe use LVDS1 */ if (IS_ENABLED(CONFIG_PCI_IMX6)) - clk_set_parent(clk[lvds1_sel], clk[sata_ref]); + clk_set_parent(clk[lvds1_sel], clk[sata_ref_100m]); /* Set initial power mode */ imx6q_set_lpm(WAIT_CLOCKED); -- cgit v1.2.3 From 79272b3562bb44ce7dc720cd13136f5a4a53c618 Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Fri, 20 Jun 2014 09:36:41 -0400 Subject: GFS2: Only wait for demote when last holder is dequeued Function gfs2_glock_dq_wait is supposed to dequeue a glock and then wait for the lock to be demoted. The problem is, if this is a shared lock, its demote will depend on the other holders, which means you might end up waiting forever because the other process is blocked. This problem is especially apparent when dealing with nested flocks. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/glock.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index c355f7320e44..278fae5b6982 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -1128,7 +1128,9 @@ void gfs2_glock_dq_wait(struct gfs2_holder *gh) struct gfs2_glock *gl = gh->gh_gl; gfs2_glock_dq(gh); might_sleep(); - wait_on_bit(&gl->gl_flags, GLF_DEMOTE, gfs2_glock_demote_wait, TASK_UNINTERRUPTIBLE); + if (!find_first_holder(gl)) + wait_on_bit(&gl->gl_flags, GLF_DEMOTE, gfs2_glock_demote_wait, + TASK_UNINTERRUPTIBLE); } /** -- cgit v1.2.3 From 94a09a3999ee978e097b5aad74034ed43bae56db Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Mon, 23 Jun 2014 14:43:32 +0100 Subject: GFS2: Fix race in glock lru glock disposal We must not leave items on the LRU list with GLF_LOCK set, since they can be removed if the glock is brought back into use, which may then potentially result in a hang, waiting for GLF_LOCK to clear. It doesn't happen very often, since it requires a glock that has not been used for a long time to be brought back into use at the same moment that the shrinker is part way through disposing of glocks. The fix is to set GLF_LOCK at a later time, when we already know that the other locks can be obtained. Also, we now only release the lru_lock in case a resched is needed, rather than on every iteration. Signed-off-by: Steven Whitehouse --- fs/gfs2/glock.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index 278fae5b6982..c1e5b126d2ca 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -1406,12 +1406,16 @@ __acquires(&lru_lock) gl = list_entry(list->next, struct gfs2_glock, gl_lru); list_del_init(&gl->gl_lru); if (!spin_trylock(&gl->gl_spin)) { +add_back_to_lru: list_add(&gl->gl_lru, &lru_list); atomic_inc(&lru_count); continue; } + if (test_and_set_bit(GLF_LOCK, &gl->gl_flags)) { + spin_unlock(&gl->gl_spin); + goto add_back_to_lru; + } clear_bit(GLF_LRU, &gl->gl_flags); - spin_unlock(&lru_lock); gl->gl_lockref.count++; if (demote_ok(gl)) handle_callback(gl, LM_ST_UNLOCKED, 0, false); @@ -1419,7 +1423,7 @@ __acquires(&lru_lock) if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0) gl->gl_lockref.count--; spin_unlock(&gl->gl_spin); - spin_lock(&lru_lock); + cond_resched_lock(&lru_lock); } } @@ -1444,7 +1448,7 @@ static long gfs2_scan_glock_lru(int nr) gl = list_entry(lru_list.next, struct gfs2_glock, gl_lru); /* Test for being demotable */ - if (!test_and_set_bit(GLF_LOCK, &gl->gl_flags)) { + if (!test_bit(GLF_LOCK, &gl->gl_flags)) { list_move(&gl->gl_lru, &dispose); atomic_dec(&lru_count); freed++; -- cgit v1.2.3 From fe0bbd2986996b9efe3a78bf5a591b0496c7afea Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Mon, 23 Jun 2014 14:50:20 +0100 Subject: GFS2: Use GFP_NOFS when allocating glocks Normally GFP_KERNEL is ok here, but there is now a rarely used code path relating to deallocation of unlinked inodes (in certain corner cases) which if hit at times of memory shortage can cause recursion while trying to free memory. One solution would be to try and move the gfs2_glock_get() call so that it is no longer called while another glock is held, but that doesn't look at all easy, so GFP_NOFS is the best solution for the time being. Signed-off-by: Steven Whitehouse --- fs/gfs2/glock.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index c1e5b126d2ca..b703dcc91588 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -731,14 +731,14 @@ int gfs2_glock_get(struct gfs2_sbd *sdp, u64 number, cachep = gfs2_glock_aspace_cachep; else cachep = gfs2_glock_cachep; - gl = kmem_cache_alloc(cachep, GFP_KERNEL); + gl = kmem_cache_alloc(cachep, GFP_NOFS); if (!gl) return -ENOMEM; memset(&gl->gl_lksb, 0, sizeof(struct dlm_lksb)); if (glops->go_flags & GLOF_LVB) { - gl->gl_lksb.sb_lvbptr = kzalloc(GFS2_MIN_LVB_SIZE, GFP_KERNEL); + gl->gl_lksb.sb_lvbptr = kzalloc(GFS2_MIN_LVB_SIZE, GFP_NOFS); if (!gl->gl_lksb.sb_lvbptr) { kmem_cache_free(cachep, gl); return -ENOMEM; -- cgit v1.2.3 From 6ec43b1838bd71633ac3f853c63ddf1f5940b1ed Mon Sep 17 00:00:00 2001 From: Fabian Frederick Date: Wed, 25 Jun 2014 20:40:45 +0200 Subject: GFS2: replace count*size kzalloc by kcalloc kcalloc manages count*sizeof overflow. Cc: cluster-devel@redhat.com Signed-off-by: Fabian Frederick Signed-off-by: Steven Whitehouse --- fs/gfs2/lock_dlm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/gfs2/lock_dlm.c b/fs/gfs2/lock_dlm.c index 91f274de1246..4fafea1c9ecf 100644 --- a/fs/gfs2/lock_dlm.c +++ b/fs/gfs2/lock_dlm.c @@ -1036,8 +1036,8 @@ static int set_recover_size(struct gfs2_sbd *sdp, struct dlm_slot *slots, new_size = old_size + RECOVER_SIZE_INC; - submit = kzalloc(new_size * sizeof(uint32_t), GFP_NOFS); - result = kzalloc(new_size * sizeof(uint32_t), GFP_NOFS); + submit = kcalloc(new_size, sizeof(uint32_t), GFP_NOFS); + result = kcalloc(new_size, sizeof(uint32_t), GFP_NOFS); if (!submit || !result) { kfree(submit); kfree(result); -- cgit v1.2.3 From 5bef3e7cf18c56cc733777c61b6b61a0b8a62b35 Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Thu, 26 Jun 2014 10:46:25 -0400 Subject: GFS2: Allow flocks to use normal glock dq rather than dq_wait This patch allows flock glocks to use a non-blocking dequeue rather than dq_wait. It also reverts the previous patch I had posted regarding dq_wait. The reverted patch isn't necessarily a bad idea, but I decided this might avoid unforeseen side effects, and was therefore safer. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/file.c | 2 +- fs/gfs2/glock.c | 4 +--- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c index 4fc3a3046174..491e8e023598 100644 --- a/fs/gfs2/file.c +++ b/fs/gfs2/file.c @@ -991,7 +991,7 @@ static int do_flock(struct file *file, int cmd, struct file_lock *fl) goto out; flock_lock_file_wait(file, &(struct file_lock){.fl_type = F_UNLCK}); - gfs2_glock_dq_wait(fl_gh); + gfs2_glock_dq(fl_gh); gfs2_holder_reinit(state, flags, fl_gh); } else { error = gfs2_glock_get(GFS2_SB(&ip->i_inode), ip->i_no_addr, diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index b703dcc91588..ee4e04fe60fc 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -1128,9 +1128,7 @@ void gfs2_glock_dq_wait(struct gfs2_holder *gh) struct gfs2_glock *gl = gh->gh_gl; gfs2_glock_dq(gh); might_sleep(); - if (!find_first_holder(gl)) - wait_on_bit(&gl->gl_flags, GLF_DEMOTE, gfs2_glock_demote_wait, - TASK_UNINTERRUPTIBLE); + wait_on_bit(&gl->gl_flags, GLF_DEMOTE, gfs2_glock_demote_wait, TASK_UNINTERRUPTIBLE); } /** -- cgit v1.2.3 From 97a4f1d7653684fff0d50e9328917506f06e9d79 Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Thu, 26 Jun 2014 10:47:48 -0400 Subject: GFS2: Allow caching of glocks for flock This patch removes the GLF_NOCACHE flag from the glocks associated with flocks. There should be no good reason not to cache glocks for flocks: they only force the glock to be demoted before they can be reacquired, which can slow down performance and even cause glock hangs, especially in cases where the flocks are held in Shared (SH) mode. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c index 491e8e023598..26b3f952e6b1 100644 --- a/fs/gfs2/file.c +++ b/fs/gfs2/file.c @@ -981,7 +981,7 @@ static int do_flock(struct file *file, int cmd, struct file_lock *fl) int error = 0; state = (fl->fl_type == F_WRLCK) ? LM_ST_EXCLUSIVE : LM_ST_SHARED; - flags = (IS_SETLKW(cmd) ? 0 : LM_FLAG_TRY) | GL_EXACT | GL_NOCACHE; + flags = (IS_SETLKW(cmd) ? 0 : LM_FLAG_TRY) | GL_EXACT; mutex_lock(&fp->f_fl_mutex); -- cgit v1.2.3 From 6b49d1d9c3c1088758c6a2758aaa5d236ef609e2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 29 Jun 2014 12:21:39 +0200 Subject: GFS2: memcontrol: Spelling s/invlidate/invalidate/ Signed-off-by: Geert Uytterhoeven Cc: cluster-devel@redhat.com Signed-off-by: Steven Whitehouse --- fs/gfs2/glops.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c index fc1100781bbc..2ffc67dce87f 100644 --- a/fs/gfs2/glops.c +++ b/fs/gfs2/glops.c @@ -234,8 +234,8 @@ static void inode_go_sync(struct gfs2_glock *gl) * inode_go_inval - prepare a inode glock to be released * @gl: the glock * @flags: - * - * Normally we invlidate everything, but if we are moving into + * + * Normally we invalidate everything, but if we are moving into * LM_ST_DEFERRED from LM_ST_SHARED or LM_ST_EXCLUSIVE then we * can keep hold of the metadata, since it won't have changed. * -- cgit v1.2.3 From 27ff6a0f7f5bf500e9d2a8760c062789b52c551f Mon Sep 17 00:00:00 2001 From: Fabian Frederick Date: Wed, 2 Jul 2014 22:05:27 +0200 Subject: GFS2: fs/gfs2/rgrp.c: kernel-doc warning fixes Cc: cluster-devel@redhat.com Signed-off-by: Fabian Frederick Signed-off-by: Steven Whitehouse --- fs/gfs2/rgrp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index db629d1bd1bd..f4cb9c0d6bbd 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -337,7 +337,7 @@ static bool gfs2_unaligned_extlen(struct gfs2_rbm *rbm, u32 n_unaligned, u32 *le /** * gfs2_free_extlen - Return extent length of free blocks - * @rbm: Starting position + * @rrbm: Starting position * @len: Max length to check * * Starting at the block specified by the rbm, see how many free blocks @@ -2522,7 +2522,7 @@ void gfs2_rlist_alloc(struct gfs2_rgrp_list *rlist, unsigned int state) /** * gfs2_rlist_free - free a resource group list - * @list: the list of resource groups + * @rlist: the list of resource groups * */ -- cgit v1.2.3 From 29e697b11853d3f83b1864ae385abdad4aa2c361 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 17 Jul 2014 17:23:44 +0200 Subject: irqchip: gic: Fix core ID calculation when topology is read from DT Certain GIC implementation, namely those found on earlier, single cluster, Exynos SoCs, have registers mapped without per-CPU banking, which means that the driver needs to use different offset for each CPU. Currently the driver calculates the offset by multiplying value returned by cpu_logical_map() by CPU offset parsed from DT. This is correct when CPU topology is not specified in DT and aforementioned function returns core ID alone. However when DT contains CPU topology, the function changes to return cluster ID as well, which is non-zero on mentioned SoCs and so breaks the calculation in GIC driver. This patch fixes this by masking out cluster ID in CPU offset calculation so that only core ID is considered. Multi-cluster Exynos SoCs already have banked GIC implementations, so this simple fix should be enough. Reported-by: Lorenzo Pieralisi Reported-by: Bartlomiej Zolnierkiewicz Signed-off-by: Tomasz Figa Fixes: db0d4db22a78d ("ARM: gic: allow GIC to support non-banked setups") Cc: # v3.3+ Link: https://lkml.kernel.org/r/1405610624-18722-1-git-send-email-t.figa@samsung.com Signed-off-by: Jason Cooper --- drivers/irqchip/irq-gic.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index 66ed8922dab2..7c131cf7cc13 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -42,6 +42,7 @@ #include #include +#include #include #include #include @@ -954,7 +955,9 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, } for_each_possible_cpu(cpu) { - unsigned long offset = percpu_offset * cpu_logical_map(cpu); + u32 mpidr = cpu_logical_map(cpu); + u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0); + unsigned long offset = percpu_offset * core_id; *per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset; *per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset; } -- cgit v1.2.3 From dba1fd0bff38966f16bbe194fb451f73ddaafb58 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Mon, 14 Jul 2014 11:08:14 +0800 Subject: ARM: at91: at91sam9x5: correct typo error for ohci clock Correct the typo error for the second "uhphs_clk". Signed-off-by: Bo Shen Acked-by: Boris Brezillon Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9x5.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index d6133f497207..ae34c9ca4bba 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -1153,8 +1153,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>, - <&uhpck>; + clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; -- cgit v1.2.3 From 043dfc1b624caf67a52412412a7ccce2d7d2b7f5 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Mon, 14 Jul 2014 08:39:27 +0200 Subject: ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsi udphs_clk (USB Device Controller clock) is referenced instead of uhphs_clk (USB Host Controller clock). Signed-off-by: Boris BREZILLON Acked-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9n12.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 287795985e32..b84bac5bada4 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -925,7 +925,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>, + clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; -- cgit v1.2.3 From e0d69e119fc6bf7cc3c9f791478108c1b925bb2e Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Thu, 17 Jul 2014 21:03:58 +0200 Subject: ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsi The pwm driver requires a clocks property referencing the pwm peripheral clk. Signed-off-by: Boris BREZILLON Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9x5.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index ae34c9ca4bba..5ef716ddd5fe 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -1122,6 +1122,7 @@ compatible = "atmel,at91sam9rl-pwm"; reg = <0xf8034000 0x300>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; + clocks = <&pwm_clk>; #pwm-cells = <3>; status = "disabled"; }; -- cgit v1.2.3 From 9637f30e6b7bc394c08fa9d27d63622f141142e9 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 16 Jul 2014 02:59:18 +0900 Subject: ARM: EXYNOS: Fix core ID used by platsmp and hotplug code When CPU topology is specified in device tree, cpu_logical_map() does not return core ID anymore, but rather full MPIDR value. This breaks existing calculation of PMU register offsets on Exynos SoCs. This patch fixes the problem by adjusting the code to use only core ID bits of the value returned by cpu_logical_map() to allow CPU topology to be specified in device tree on Exynos SoCs. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim Signed-off-by: Olof Johansson --- arch/arm/mach-exynos/hotplug.c | 10 ++++++---- arch/arm/mach-exynos/platsmp.c | 34 +++++++++++++++++++--------------- 2 files changed, 25 insertions(+), 19 deletions(-) diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index 8a134d019cb3..920a4baa53cd 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -40,15 +40,17 @@ static inline void cpu_leave_lowpower(void) static inline void platform_do_lowpower(unsigned int cpu, int *spurious) { + u32 mpidr = cpu_logical_map(cpu); + u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0); + for (;;) { - /* make cpu1 to be turned off at next WFI command */ - if (cpu == 1) - exynos_cpu_power_down(cpu); + /* Turn the CPU off on next WFI instruction. */ + exynos_cpu_power_down(core_id); wfi(); - if (pen_release == cpu_logical_map(cpu)) { + if (pen_release == core_id) { /* * OK, proper wakeup, we're done */ diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 1c8d31e39520..50b9aad5e27b 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -90,7 +90,8 @@ static void exynos_secondary_init(unsigned int cpu) static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; - unsigned long phys_cpu = cpu_logical_map(cpu); + u32 mpidr = cpu_logical_map(cpu); + u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0); int ret = -ENOSYS; /* @@ -104,17 +105,18 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) * the holding pen - release it, then wait for it to flag * that it has been released by resetting pen_release. * - * Note that "pen_release" is the hardware CPU ID, whereas + * Note that "pen_release" is the hardware CPU core ID, whereas * "cpu" is Linux's internal ID. */ - write_pen_release(phys_cpu); + write_pen_release(core_id); - if (!exynos_cpu_power_state(cpu)) { - exynos_cpu_power_up(cpu); + if (!exynos_cpu_power_state(core_id)) { + exynos_cpu_power_up(core_id); timeout = 10; /* wait max 10 ms until cpu1 is on */ - while (exynos_cpu_power_state(cpu) != S5P_CORE_LOCAL_PWR_EN) { + while (exynos_cpu_power_state(core_id) + != S5P_CORE_LOCAL_PWR_EN) { if (timeout-- == 0) break; @@ -145,20 +147,20 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) * Try to set boot address using firmware first * and fall back to boot register if it fails. */ - ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr); + ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr); if (ret && ret != -ENOSYS) goto fail; if (ret == -ENOSYS) { - void __iomem *boot_reg = cpu_boot_reg(phys_cpu); + void __iomem *boot_reg = cpu_boot_reg(core_id); if (IS_ERR(boot_reg)) { ret = PTR_ERR(boot_reg); goto fail; } - __raw_writel(boot_addr, cpu_boot_reg(phys_cpu)); + __raw_writel(boot_addr, cpu_boot_reg(core_id)); } - call_firmware_op(cpu_boot, phys_cpu); + call_firmware_op(cpu_boot, core_id); arch_send_wakeup_ipi_mask(cpumask_of(cpu)); @@ -227,22 +229,24 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) * boot register if it fails. */ for (i = 1; i < max_cpus; ++i) { - unsigned long phys_cpu; unsigned long boot_addr; + u32 mpidr; + u32 core_id; int ret; - phys_cpu = cpu_logical_map(i); + mpidr = cpu_logical_map(i); + core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0); boot_addr = virt_to_phys(exynos4_secondary_startup); - ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr); + ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr); if (ret && ret != -ENOSYS) break; if (ret == -ENOSYS) { - void __iomem *boot_reg = cpu_boot_reg(phys_cpu); + void __iomem *boot_reg = cpu_boot_reg(core_id); if (IS_ERR(boot_reg)) break; - __raw_writel(boot_addr, cpu_boot_reg(phys_cpu)); + __raw_writel(boot_addr, cpu_boot_reg(core_id)); } } } -- cgit v1.2.3 From 79a8468747c5f95ed3d5ce8376a3e82e0c5857fc Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Fri, 18 Jul 2014 17:26:41 -0400 Subject: random: check for increase of entropy_count because of signed conversion The expression entropy_count -= ibytes << (ENTROPY_SHIFT + 3) could actually increase entropy_count if during assignment of the unsigned expression on the RHS (mind the -=) we reduce the value modulo 2^width(int) and assign it to entropy_count. Trinity found this. [ Commit modified by tytso to add an additional safety check for a negative entropy_count -- which should never happen, and to also add an additional paranoia check to prevent overly large count values to be passed into urandom_read(). ] Reported-by: Dave Jones Signed-off-by: Hannes Frederic Sowa Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- drivers/char/random.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index 0a7ac0a7b252..71529e196b84 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -641,7 +641,7 @@ retry: } while (unlikely(entropy_count < pool_size-2 && pnfrac)); } - if (entropy_count < 0) { + if (unlikely(entropy_count < 0)) { pr_warn("random: negative entropy/overflow: pool %s count %d\n", r->name, entropy_count); WARN_ON(1); @@ -981,7 +981,7 @@ static size_t account(struct entropy_store *r, size_t nbytes, int min, int reserved) { int entropy_count, orig; - size_t ibytes; + size_t ibytes, nfrac; BUG_ON(r->entropy_count > r->poolinfo->poolfracbits); @@ -999,7 +999,17 @@ retry: } if (ibytes < min) ibytes = 0; - if ((entropy_count -= ibytes << (ENTROPY_SHIFT + 3)) < 0) + + if (unlikely(entropy_count < 0)) { + pr_warn("random: negative entropy count: pool %s count %d\n", + r->name, entropy_count); + WARN_ON(1); + entropy_count = 0; + } + nfrac = ibytes << (ENTROPY_SHIFT + 3); + if ((size_t) entropy_count > nfrac) + entropy_count -= nfrac; + else entropy_count = 0; if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig) @@ -1376,6 +1386,7 @@ urandom_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos) "with %d bits of entropy available\n", current->comm, nonblocking_pool.entropy_total); + nbytes = min_t(size_t, nbytes, INT_MAX >> (ENTROPY_SHIFT + 3)); ret = extract_entropy_user(&nonblocking_pool, buf, nbytes); trace_urandom_read(8 * nbytes, ENTROPY_BITS(&nonblocking_pool), -- cgit v1.2.3 From 98ce2deda23a303682a4253f3016a1436f4b2735 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Thu, 17 Jul 2014 16:08:36 +0800 Subject: Btrfs: fix abnormal long waiting in fsync xfstests generic/127 detected this problem. With commit 7fc34a62ca4434a79c68e23e70ed26111b7a4cf8, now fsync will only flush data within the passed range. This is the cause of the above problem, -- btrfs's fsync has a stage called 'sync log' which will wait for all the ordered extents it've recorded to finish. In xfstests/generic/127, with mixed operations such as truncate, fallocate, punch hole, and mapwrite, we get some pre-allocated extents, and mapwrite will mmap, and then msync. And I find that msync will wait for quite a long time (about 20s in my case), thanks to ftrace, it turns out that the previous fallocate calls 'btrfs_wait_ordered_range()' to flush dirty pages, but as the range of dirty pages may be larger than 'btrfs_wait_ordered_range()' wants, there can be some ordered extents created but not getting corresponding pages flushed, then they're left in memory until we fsync which runs into the stage 'sync log', and fsync will just wait for the system writeback thread to flush those pages and get ordered extents finished, so the latency is inevitable. This adds a flush similar to btrfs_start_ordered_extent() in btrfs_wait_logged_extents() to fix that. Reviewed-by: Miao Xie Signed-off-by: Liu Bo Signed-off-by: Chris Mason --- fs/btrfs/ordered-data.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c index e12441c7cf1d..7187b14faa6c 100644 --- a/fs/btrfs/ordered-data.c +++ b/fs/btrfs/ordered-data.c @@ -484,8 +484,19 @@ void btrfs_wait_logged_extents(struct btrfs_root *log, u64 transid) log_list); list_del_init(&ordered->log_list); spin_unlock_irq(&log->log_extents_lock[index]); + + if (!test_bit(BTRFS_ORDERED_IO_DONE, &ordered->flags) && + !test_bit(BTRFS_ORDERED_DIRECT, &ordered->flags)) { + struct inode *inode = ordered->inode; + u64 start = ordered->file_offset; + u64 end = ordered->file_offset + ordered->len - 1; + + WARN_ON(!inode); + filemap_fdatawrite_range(inode->i_mapping, start, end); + } wait_event(ordered->wait, test_bit(BTRFS_ORDERED_IO_DONE, &ordered->flags)); + btrfs_put_ordered_extent(ordered); spin_lock_irq(&log->log_extents_lock[index]); } -- cgit v1.2.3 From 0bfaa9c5cb479cebc24979b384374fe47500b4c9 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 7 Jul 2014 12:34:49 -0500 Subject: btrfs: test for valid bdev before kobj removal in btrfs_rm_device commit 99994cd btrfs: dev delete should remove sysfs entry added a btrfs_kobj_rm_device, which dereferences device->bdev... right after we check whether device->bdev might be NULL. I don't honestly know if it's possible to have a NULL device->bdev here, but assuming that it is (given the test), we need to move the kobject removal to be under that test. (Coverity spotted this) Signed-off-by: Eric Sandeen Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 6104676857f5..6cb82f62cb7c 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1680,11 +1680,11 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path) if (device->bdev == root->fs_info->fs_devices->latest_bdev) root->fs_info->fs_devices->latest_bdev = next_device->bdev; - if (device->bdev) + if (device->bdev) { device->fs_devices->open_devices--; - - /* remove sysfs entry */ - btrfs_kobj_rm_device(root->fs_info, device); + /* remove sysfs entry */ + btrfs_kobj_rm_device(root->fs_info, device); + } call_rcu(&device->rcu, free_device); -- cgit v1.2.3 From ae5db6d12341684913a78b6537c0b9c22c999b5c Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Sun, 20 Jul 2014 12:56:34 +0200 Subject: Revert "um: Fix wait_stub_done() error handling" This reverts commit 0974a9cadc7886f7baaa458bb0c89f5c5f9d458e. The real for for that issue is to release current->mm->mmap_sem in fix_range_common(). Signed-off-by: Richard Weinberger --- arch/um/os-Linux/skas/process.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c index d531879a4617..908579f2b0ab 100644 --- a/arch/um/os-Linux/skas/process.c +++ b/arch/um/os-Linux/skas/process.c @@ -54,7 +54,7 @@ static int ptrace_dump_regs(int pid) void wait_stub_done(int pid) { - int n, status, err, bad_stop = 0; + int n, status, err; while (1) { CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED | __WALL)); @@ -74,8 +74,6 @@ void wait_stub_done(int pid) if (((1 << WSTOPSIG(status)) & STUB_DONE_MASK) != 0) return; - else - bad_stop = 1; bad_wait: err = ptrace_dump_regs(pid); @@ -85,10 +83,7 @@ bad_wait: printk(UM_KERN_ERR "wait_stub_done : failed to wait for SIGTRAP, " "pid = %d, n = %d, errno = %d, status = 0x%x\n", pid, n, errno, status); - if (bad_stop) - kill(pid, SIGKILL); - else - fatal_sigsegv(); + fatal_sigsegv(); } extern unsigned long current_stub_stack(void); -- cgit v1.2.3 From 284e6d39516cc7f9fbceebb259849fcb41559a7b Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Sun, 20 Jul 2014 13:09:15 +0200 Subject: um: Ensure that a stub page cannot get unmapped MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Trinity discovered an execution path such that a task can unmap his stub page. Reported-by: Toralf Förster Signed-off-by: Richard Weinberger --- arch/um/kernel/tlb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/um/kernel/tlb.c b/arch/um/kernel/tlb.c index 9472079471bb..1fc619e5dfe9 100644 --- a/arch/um/kernel/tlb.c +++ b/arch/um/kernel/tlb.c @@ -124,6 +124,9 @@ static int add_munmap(unsigned long addr, unsigned long len, struct host_vm_op *last; int ret = 0; + if ((addr >= STUB_START) && (addr < STUB_END)) + return -EINVAL; + if (hvc->index != 0) { last = &hvc->ops[hvc->index - 1]; if ((last->type == MUNMAP) && -- cgit v1.2.3 From 468f65976a8d065ee1f27782337f4ee85a9151c5 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Sun, 20 Jul 2014 13:16:20 +0200 Subject: um: Fix hung task in fix_range_common() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If do_ops() fails we have to release current->mm->mmap_sem otherwise the failing task will never terminate. Reported-by: Toralf Förster Signed-off-by: Richard Weinberger --- arch/um/kernel/tlb.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/um/kernel/tlb.c b/arch/um/kernel/tlb.c index 1fc619e5dfe9..f1b3eb14b855 100644 --- a/arch/um/kernel/tlb.c +++ b/arch/um/kernel/tlb.c @@ -12,6 +12,7 @@ #include #include #include +#include struct host_vm_change { struct host_vm_op { @@ -286,8 +287,11 @@ void fix_range_common(struct mm_struct *mm, unsigned long start_addr, /* This is not an else because ret is modified above */ if (ret) { printk(KERN_ERR "fix_range_common: failed, killing current " - "process\n"); + "process: %d\n", task_tgid_vnr(current)); + /* We are under mmap_sem, release it such that current can terminate */ + up_write(¤t->mm->mmap_sem); force_sig(SIGKILL, current); + do_signal(); } } -- cgit v1.2.3 From bb6a1b2e189f797c0e4a116aec7ce77c344f11e0 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Sun, 20 Jul 2014 13:39:27 +0200 Subject: um: segv: Save regs only in case of a kernel mode fault ...otherwise me lose user mode regs and the resulting stack trace is useless. Signed-off-by: Richard Weinberger --- arch/um/kernel/trap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c index 974b87474a99..5678c3571e7c 100644 --- a/arch/um/kernel/trap.c +++ b/arch/um/kernel/trap.c @@ -206,7 +206,7 @@ unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, int is_write = FAULT_WRITE(fi); unsigned long address = FAULT_ADDRESS(fi); - if (regs) + if (!is_user && regs) current->thread.segv_regs = container_of(regs, struct pt_regs, regs); if (!is_user && (address >= start_vm) && (address < end_vm)) { -- cgit v1.2.3 From 9a3c4145af32125c5ee39c0272662b47307a8323 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 20 Jul 2014 21:04:16 -0700 Subject: Linux 3.16-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index f3c543df4697..6b2774145d66 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 16 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Shuffling Zombie Juror # *DOCUMENTATION* -- cgit v1.2.3