From 433a9389a11778f1bc342789abccac9ce46eee82 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Fri, 1 Nov 2013 15:28:24 -0700 Subject: Bluetooth: btmrvl: use cal-data from device-tree instead of conf file Some ARM versions of Chromebook need to download a new calibration data from host driver to firmware. They do have EEPROM but still need a piece of new calibration data in test mode. The cal-data is platform dependent. It's simpler and more feasible to use device tree based cal-data instead of configuration file based cal-data. This patch remove configuration file based cal-data downloading and replace it using cal-data from device tree. When CONFIG_OF is not selected, or the specific property is not present in the device tree, the calibration downloading will not happen. Cc: Mike Frysinger Cc: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: Hyuckjoo Lee Signed-off-by: Marcel Holtmann --- drivers/bluetooth/btmrvl_drv.h | 4 -- drivers/bluetooth/btmrvl_main.c | 92 ++++++++--------------------------------- drivers/bluetooth/btmrvl_sdio.c | 9 +--- drivers/bluetooth/btmrvl_sdio.h | 2 - 4 files changed, 18 insertions(+), 89 deletions(-) diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h index e3b49c68ea71..98187f09393d 100644 --- a/drivers/bluetooth/btmrvl_drv.h +++ b/drivers/bluetooth/btmrvl_drv.h @@ -23,8 +23,6 @@ #include #include #include -#include -#include #define BTM_HEADER_LEN 4 #define BTM_UPLD_SIZE 2312 @@ -43,8 +41,6 @@ struct btmrvl_thread { struct btmrvl_device { void *card; struct hci_dev *hcidev; - struct device *dev; - const char *cal_data; u8 dev_type; diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c index 477b658316b4..6441f724aeb0 100644 --- a/drivers/bluetooth/btmrvl_main.c +++ b/drivers/bluetooth/btmrvl_main.c @@ -19,7 +19,7 @@ **/ #include - +#include #include #include @@ -414,52 +414,8 @@ static int btmrvl_open(struct hci_dev *hdev) return 0; } -/* - * This function parses provided calibration data input. It should contain - * hex bytes separated by space or new line character. Here is an example. - * 00 1C 01 37 FF FF FF FF 02 04 7F 01 - * CE BA 00 00 00 2D C6 C0 00 00 00 00 - * 00 F0 00 00 - */ -static int btmrvl_parse_cal_cfg(const u8 *src, u32 len, u8 *dst, u32 dst_size) -{ - const u8 *s = src; - u8 *d = dst; - int ret; - u8 tmp[3]; - - tmp[2] = '\0'; - while ((s - src) <= len - 2) { - if (isspace(*s)) { - s++; - continue; - } - - if (isxdigit(*s)) { - if ((d - dst) >= dst_size) { - BT_ERR("calibration data file too big!!!"); - return -EINVAL; - } - - memcpy(tmp, s, 2); - - ret = kstrtou8(tmp, 16, d++); - if (ret < 0) - return ret; - - s += 2; - } else { - return -EINVAL; - } - } - if (d == dst) - return -EINVAL; - - return 0; -} - -static int btmrvl_load_cal_data(struct btmrvl_private *priv, - u8 *config_data) +static int btmrvl_download_cal_data(struct btmrvl_private *priv, + u8 *config_data) { int i, ret; u8 data[BT_CMD_DATA_SIZE]; @@ -487,54 +443,40 @@ static int btmrvl_load_cal_data(struct btmrvl_private *priv, return 0; } -static int -btmrvl_process_cal_cfg(struct btmrvl_private *priv, u8 *data, u32 size) +static int btmrvl_cal_data_dt(struct btmrvl_private *priv) { + struct device_node *dt_node; u8 cal_data[BT_CAL_DATA_SIZE]; + const char name[] = "btmrvl_caldata"; + const char property[] = "btmrvl,caldata"; int ret; - ret = btmrvl_parse_cal_cfg(data, size, cal_data, sizeof(cal_data)); + dt_node = of_find_node_by_name(NULL, name); + if (!dt_node) + return -ENODEV; + + ret = of_property_read_u8_array(dt_node, property, cal_data, + sizeof(cal_data)); if (ret) return ret; - ret = btmrvl_load_cal_data(priv, cal_data); + BT_DBG("Use cal data from device tree"); + ret = btmrvl_download_cal_data(priv, cal_data); if (ret) { - BT_ERR("Fail to load calibrate data"); + BT_ERR("Fail to download calibrate data"); return ret; } return 0; } -static int btmrvl_cal_data_config(struct btmrvl_private *priv) -{ - const struct firmware *cfg; - int ret; - const char *cal_data = priv->btmrvl_dev.cal_data; - - if (!cal_data) - return 0; - - ret = request_firmware(&cfg, cal_data, priv->btmrvl_dev.dev); - if (ret < 0) { - BT_DBG("Failed to get %s file, skipping cal data download", - cal_data); - return 0; - } - - ret = btmrvl_process_cal_cfg(priv, (u8 *)cfg->data, cfg->size); - release_firmware(cfg); - return ret; -} - static int btmrvl_setup(struct hci_dev *hdev) { struct btmrvl_private *priv = hci_get_drvdata(hdev); btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ); - if (btmrvl_cal_data_config(priv)) - BT_ERR("Set cal data failed"); + btmrvl_cal_data_dt(priv); priv->btmrvl_dev.psmode = 1; btmrvl_enable_ps(priv); diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index fabcf5bb48af..1b52c9f5230d 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -18,6 +18,7 @@ * this warranty disclaimer. **/ +#include #include #include @@ -101,7 +102,6 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_88xx = { static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = { .helper = "mrvl/sd8688_helper.bin", .firmware = "mrvl/sd8688.bin", - .cal_data = NULL, .reg = &btmrvl_reg_8688, .sd_blksz_fw_dl = 64, }; @@ -109,7 +109,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = { static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = { .helper = NULL, .firmware = "mrvl/sd8787_uapsta.bin", - .cal_data = NULL, .reg = &btmrvl_reg_87xx, .sd_blksz_fw_dl = 256, }; @@ -117,7 +116,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = { static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = { .helper = NULL, .firmware = "mrvl/sd8797_uapsta.bin", - .cal_data = "mrvl/sd8797_caldata.conf", .reg = &btmrvl_reg_87xx, .sd_blksz_fw_dl = 256, }; @@ -125,7 +123,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = { static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = { .helper = NULL, .firmware = "mrvl/sd8897_uapsta.bin", - .cal_data = NULL, .reg = &btmrvl_reg_88xx, .sd_blksz_fw_dl = 256, }; @@ -1007,7 +1004,6 @@ static int btmrvl_sdio_probe(struct sdio_func *func, struct btmrvl_sdio_device *data = (void *) id->driver_data; card->helper = data->helper; card->firmware = data->firmware; - card->cal_data = data->cal_data; card->reg = data->reg; card->sd_blksz_fw_dl = data->sd_blksz_fw_dl; } @@ -1036,8 +1032,6 @@ static int btmrvl_sdio_probe(struct sdio_func *func, } card->priv = priv; - priv->btmrvl_dev.dev = &card->func->dev; - priv->btmrvl_dev.cal_data = card->cal_data; /* Initialize the interface specific function pointers */ priv->hw_host_to_card = btmrvl_sdio_host_to_card; @@ -1220,5 +1214,4 @@ MODULE_FIRMWARE("mrvl/sd8688_helper.bin"); MODULE_FIRMWARE("mrvl/sd8688.bin"); MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin"); MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin"); -MODULE_FIRMWARE("mrvl/sd8797_caldata.conf"); MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin"); diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h index 6872d9ecac07..43d35a609ca9 100644 --- a/drivers/bluetooth/btmrvl_sdio.h +++ b/drivers/bluetooth/btmrvl_sdio.h @@ -85,7 +85,6 @@ struct btmrvl_sdio_card { u32 ioport; const char *helper; const char *firmware; - const char *cal_data; const struct btmrvl_sdio_card_reg *reg; u16 sd_blksz_fw_dl; u8 rx_unit; @@ -95,7 +94,6 @@ struct btmrvl_sdio_card { struct btmrvl_sdio_device { const char *helper; const char *firmware; - const char *cal_data; const struct btmrvl_sdio_card_reg *reg; u16 sd_blksz_fw_dl; }; -- cgit v1.2.3