From 2fba753cc9b57d82800db0997b9271898323c57e Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 7 Mar 2023 12:19:15 -0600 Subject: bnx2x: Drop redundant pci_enable_pcie_error_reporting() pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by: Bjorn Helgaas Cc: Ariel Elior Cc: Sudarsana Kalluru Cc: Manish Chopra Acked-by: Jesse Brandeburg Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 1 - drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 19 ------------------- 2 files changed, 20 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index dd5945c4bfec..8bcde0a6e011 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1486,7 +1486,6 @@ struct bnx2x { #define IS_VF_FLAG (1 << 22) #define BC_SUPPORTS_RMMOD_CMD (1 << 23) #define HAS_PHYS_PORT_ID (1 << 24) -#define AER_ENABLED (1 << 25) #define PTP_SUPPORTED (1 << 26) #define TX_TIMESTAMPING_EN (1 << 27) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 5d1e4fe335aa..3bb5ea570c87 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include #include @@ -13037,14 +13036,6 @@ static const struct net_device_ops bnx2x_netdev_ops = { .ndo_features_check = bnx2x_features_check, }; -static void bnx2x_disable_pcie_error_reporting(struct bnx2x *bp) -{ - if (bp->flags & AER_ENABLED) { - pci_disable_pcie_error_reporting(bp->pdev); - bp->flags &= ~AER_ENABLED; - } -} - static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, struct net_device *dev, unsigned long board_type) { @@ -13157,13 +13148,6 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, /* Set PCIe reset type to fundamental for EEH recovery */ pdev->needs_freset = 1; - /* AER (Advanced Error reporting) configuration */ - rc = pci_enable_pcie_error_reporting(pdev); - if (!rc) - bp->flags |= AER_ENABLED; - else - BNX2X_DEV_INFO("Failed To configure PCIe AER [%d]\n", rc); - /* * Clean the following indirect addresses for all functions since it * is not used by the driver. @@ -14020,8 +14004,6 @@ init_one_freemem: bnx2x_free_mem_bp(bp); init_one_exit: - bnx2x_disable_pcie_error_reporting(bp); - if (bp->regview) iounmap(bp->regview); @@ -14102,7 +14084,6 @@ static void __bnx2x_remove(struct pci_dev *pdev, pci_set_power_state(pdev, PCI_D3hot); } - bnx2x_disable_pcie_error_reporting(bp); if (remove_netdev) { if (bp->regview) iounmap(bp->regview); -- cgit v1.2.3