summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2024-05-03tcp: Add new args for cong_control in tcp_congestion_opsMiao Xu1-3/+3
This patch adds two new arguments for cong_control of struct tcp_congestion_ops: - ack - flag These two arguments are inherited from the caller tcp_cong_control in tcp_intput.c. One use case of them is to update cwnd and pacing rate inside cong_control based on the info they provide. For example, the flag can be used to decide if it is the right time to raise or reduce a sender's cwnd. Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Miao Xu <miaxu@meta.com> Link: https://lore.kernel.org/r/20240502042318.801932-2-miaxu@meta.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-05-03KVM: selftests: Require KVM_CAP_USER_MEMORY2 for tests that create memslotsSean Christopherson1-0/+8
Explicitly require KVM_CAP_USER_MEMORY2 for selftests that create memslots, i.e. skip selftests that need memslots instead of letting them fail on KVM_SET_USER_MEMORY_REGION2. While it's ok to take a dependency on new kernel features, selftests should skip gracefully instead of failing hard when run on older kernels. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/69ae0694-8ca3-402c-b864-99b500b24f5d@moroto.mountain Suggested-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20240430162133.337541-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-05-03KVM: selftests: Allow skipping the KVM_RUN sanity check in rseq_testZide Chen1-2/+33
The rseq test's migration worker delays 1-10 us, assuming that one KVM_RUN iteration only takes a few microseconds. But if the CPU low power wakeup latency is large enough, for example, hundreds or even thousands of microseconds for deep C-state exit latencies on x86 server CPUs, it may happen that the target CPU is unable to wakeup and run the vCPU before the migration worker starts to migrate the vCPU thread to the _next_ CPU. If the system workload is light, most CPUs could be at a certain low power state, which may result in less successful migrations and fail the migration/KVM_RUN ratio sanity check. But this is not supposed to be deemed a test failure. Add a command line option to skip the sanity check, along with a comment and a verbose assert message to try to help the user resolve the potential source of failures without having to resort to disabling the check. Co-developed-by: Dongsheng Zhang <dongsheng.x.zhang@intel.com> Signed-off-by: Dongsheng Zhang <dongsheng.x.zhang@intel.com> Signed-off-by: Zide Chen <zide.chen@intel.com> Link: https://lore.kernel.org/r/20240502213936.27619-1-zide.chen@intel.com [sean: massage changelog] Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-05-03selftests/bpf: Add kernel socket operation testsJordan Rife1-0/+472
This patch creates two sets of sock_ops that call out to the SYSCALL hooks in the sock_addr_kern BPF program and uses them to construct test cases for the range of supported operations (kernel_connect(), kernel_bind(), kernel_sendms(), sock_sendmsg(), kernel_getsockname(), kenel_getpeername()). This ensures that these interact with BPF sockaddr hooks as intended. Beyond this it also ensures that these operations do not modify their address parameter, providing regression coverage for the issues addressed by this set of patches: - commit 0bdf399342c5("net: Avoid address overwrite in kernel_connect") - commit 86a7e0b69bd5("net: prevent rewrite of msg_name in sock_sendmsg()") - commit c889a99a21bf("net: prevent address rewrite in kernel_bind()") - commit 01b2885d9415("net: Save and restore msg_namelen in sock_sendmsg") Signed-off-by: Jordan Rife <jrife@google.com> Link: https://lore.kernel.org/r/20240429214529.2644801-7-jrife@google.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-05-03selftests/bpf: Make sock configurable for each test caseJordan Rife1-42/+98
In order to reuse the same test code for both socket system calls (e.g. connect(), bind(), etc.) and kernel socket functions (e.g. kernel_connect(), kernel_bind(), etc.), this patch introduces the "ops" field to sock_addr_test. This field allows each test cases to configure the set of functions used in the test case to create, manipulate, and tear down a socket. Signed-off-by: Jordan Rife <jrife@google.com> Link: https://lore.kernel.org/r/20240429214529.2644801-6-jrife@google.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-05-03selftests/bpf: Move IPv4 and IPv6 sockaddr test casesJordan Rife2-314/+268
This patch lays the groundwork for testing IPv4 and IPv6 sockaddr hooks and their interaction with both socket syscalls and kernel functions (e.g. kernel_connect, kernel_bind, etc.). It moves some of the test cases from the old-style bpf/test_sock_addr.c self test into the sock_addr prog_test in a step towards fully retiring bpf/test_sock_addr.c. We will expand the test dimensions in the sock_addr prog_test in a later patch series in order to migrate the remaining test cases. Signed-off-by: Jordan Rife <jrife@google.com> Link: https://lore.kernel.org/r/20240429214529.2644801-5-jrife@google.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-05-02selftests/bpf: Implement BPF programs for kernel socket operationsJordan Rife1-0/+65
This patch lays out a set of SYSCALL programs that can be used to invoke the socket operation kfuncs in bpf_testmod, allowing a test program to manipulate kernel socket operations from userspace. Signed-off-by: Jordan Rife <jrife@google.com> Link: https://lore.kernel.org/r/20240429214529.2644801-4-jrife@google.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-05-02selftests/bpf: Implement socket kfuncs for bpf_testmodJordan Rife2-0/+282
This patch adds a set of kfuncs to bpf_testmod that can be used to manipulate a socket from kernel space. Signed-off-by: Jordan Rife <jrife@google.com> Link: https://lore.kernel.org/r/20240429214529.2644801-3-jrife@google.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-05-02selftests/bpf: Fix bind program for big endian systemsJordan Rife3-16/+39
Without this fix, the bind4 and bind6 programs will reject bind attempts on big endian systems. This patch ensures that CI tests pass for the s390x architecture. Signed-off-by: Jordan Rife <jrife@google.com> Link: https://lore.kernel.org/r/20240429214529.2644801-2-jrife@google.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski11-45/+90
Cross-merge networking fixes after downstream PR. Conflicts: include/linux/filter.h kernel/bpf/core.c 66e13b615a0c ("bpf: verifier: prevent userspace memory access") d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT") https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-02bpf: Missing trailing slash in tools/testing/selftests/bpf/MakefileJose E. Marchesi1-1/+1
tools/lib/bpf/Makefile assumes that the patch in OUTPUT is a directory and that it includes a trailing slash. This seems to be a common expectation for OUTPUT among all the Makefiles. In the rule for runqslower in tools/testing/selftests/bpf/Makefile the variable BPFTOOL_OUTPUT is set to a directory name that lacks a trailing slash. This results in a malformed BPF_HELPER_DEFS being defined in lib/bpf/Makefile. This problem becomes evident when a file like tools/lib/bpf/bpf_tracing.h gets updated. This patch fixes the problem by adding the missing slash in the value for BPFTOOL_OUTPUT in the $(OUTPUT)/runqslower rule. Regtested by running selftests in bpf-next master and building samples/bpf programs. Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240502140831.23915-1-jose.marchesi@oracle.com
2024-05-02libbpf: Fix error message in attach_kprobe_multiJiri Olsa1-1/+1
We just failed to retrieve pattern, so we need to print spec instead. Fixes: ddc6b04989eb ("libbpf: Add bpf_program__attach_kprobe_multi_opts function") Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240502075541.1425761-2-jolsa@kernel.org
2024-05-02libbpf: Fix error message in attach_kprobe_sessionJiri Olsa1-1/+1
We just failed to retrieve pattern, so we need to print spec instead. Fixes: 2ca178f02b2f ("libbpf: Add support for kprobe session attach") Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240502075541.1425761-1-jolsa@kernel.org
2024-05-02Merge tag 'net-6.9-rc7' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf. Relatively calm week, likely due to public holiday in most places. No known outstanding regressions. Current release - regressions: - rxrpc: fix wrong alignmask in __page_frag_alloc_align() - eth: e1000e: change usleep_range to udelay in PHY mdic access Previous releases - regressions: - gro: fix udp bad offset in socket lookup - bpf: fix incorrect runtime stat for arm64 - tipc: fix UAF in error path - netfs: fix a potential infinite loop in extract_user_to_sg() - eth: ice: ensure the copied buf is NUL terminated - eth: qeth: fix kernel panic after setting hsuid Previous releases - always broken: - bpf: - verifier: prevent userspace memory access - xdp: use flags field to disambiguate broadcast redirect - bridge: fix multicast-to-unicast with fraglist GSO - mptcp: ensure snd_nxt is properly initialized on connect - nsh: fix outer header access in nsh_gso_segment(). - eth: bcmgenet: fix racing registers access - eth: vxlan: fix stats counters. Misc: - a bunch of MAINTAINERS file updates" * tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) MAINTAINERS: mark MYRICOM MYRI-10G as Orphan MAINTAINERS: remove Ariel Elior net: gro: add flush check in udp_gro_receive_segment net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb ipv4: Fix uninit-value access in __ip_make_skb() s390/qeth: Fix kernel panic after setting hsuid vxlan: Pull inner IP header in vxlan_rcv(). tipc: fix a possible memleak in tipc_buf_append tipc: fix UAF in error path rxrpc: Clients must accept conn from any address net: core: reject skb_copy(_expand) for fraglist GSO skbs net: bridge: fix multicast-to-unicast with fraglist GSO mptcp: ensure snd_nxt is properly initialized on connect e1000e: change usleep_range to udelay in PHY mdic access net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341 cxgb4: Properly lock TX queue for the selftest. rxrpc: Fix using alignmask being zero for __page_frag_alloc_align() vxlan: Add missing VNI filter counter update in arp_reduce(). vxlan: Fix racy device stats updates. net: qede: use return from qede_parse_actions() ...
2024-05-02selftests: netfilter: nft_concat_range.sh: reduce debug kernel run timeFlorian Westphal4-6/+34
Even a 1h timeout isn't enough for nft_concat_range.sh to complete on debug kernels. Reduce test complexity and only match on single entry if KSFT_MACHINE_SLOW is set. To spot 'slow' tests, print the subtest duration (in seconds) in addition to the status. Add new nft_concat_range_perf.sh script, not executed via kselftest, to run the performance (pps match rate) tests. Those need about 25m to complete which seems too much to run this via 'make run_tests'. Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20240430145810.23447-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-01libbpf: better fix for handling nulled-out struct_ops programAndrii Nakryiko2-12/+27
Previous attempt to fix the handling of nulled-out (from skeleton) struct_ops program is working well only if struct_ops program is defined as non-autoloaded by default (i.e., has SEC("?struct_ops") annotation, with question mark). Unfortunately, that fix is incomplete due to how bpf_object_adjust_struct_ops_autoload() is marking referenced or non-referenced struct_ops program as autoloaded (or not). Because bpf_object_adjust_struct_ops_autoload() is run after bpf_map__init_kern_struct_ops() step, which sets program slot to NULL, such programs won't be considered "referenced", and so its autoload property won't be changed. This all sounds convoluted and it is, but the desire is to have as natural behavior (as far as struct_ops usage is concerned) as possible. This fix is redoing the original fix but makes it work for autoloaded-by-default struct_ops programs as well. We achieve this by forcing prog->autoload to false if prog was declaratively set for some struct_ops map, but then nulled-out from skeleton (programmatically). This achieves desired effect of not autoloading it. If such program is still referenced somewhere else (different struct_ops map or different callback field), it will get its autoload property adjusted by bpf_object_adjust_struct_ops_autoload() later. We also fix selftest, which accidentally used SEC("?struct_ops") annotation. It was meant to use autoload-by-default program from the very beginning. Fixes: f973fccd43d3 ("libbpf: handle nulled-out program in struct_ops correctly") Cc: Kui-Feng Lee <thinker.li@gmail.com> Cc: Eduard Zingerman <eddyz87@gmail.com> Cc: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240501041706.3712608-1-andrii@kernel.org Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-05-01selftests/bpf: add tests for the "module: Function" syntaxViktor Malik2-0/+29
The previous patch added support for the "module:function" syntax for tracing programs. This adds tests for explicitly specifying the module name via the SEC macro and via the bpf_program__set_attach_target call. Signed-off-by: Viktor Malik <vmalik@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/8a076168ed847f7c8a6c25715737b1fea84e38be.1714469650.git.vmalik@redhat.com
2024-05-01libbpf: support "module: Function" syntax for tracing programsViktor Malik1-9/+26
In some situations, it is useful to explicitly specify a kernel module to search for a tracing program target (e.g. when a function of the same name exists in multiple modules or in vmlinux). This patch enables that by allowing the "module:function" syntax for the find_kernel_btf_id function. Thanks to this, the syntax can be used both from a SEC macro (i.e. `SEC(fentry/module:function)`) and via the bpf_program__set_attach_target API call. Signed-off-by: Viktor Malik <vmalik@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/9085a8cb9a552de98e554deb22ff7e977d025440.1714469650.git.vmalik@redhat.com
2024-05-01selftests/ftrace: add fprobe test cases for VFS type "%pd" and "%pD"Ye Bin1-0/+40
This patch adds fprobe test cases for new print format type "%pd/%pD".The test cases test the following items: 1. Test "%pd" type for dput(); 2. Test "%pD" type for vfs_read(); This test case require enable CONFIG_HAVE_FUNCTION_ARG_ACCESS_API configuration. Link: https://lore.kernel.org/all/20240322064308.284457-6-yebin10@huawei.com/ Signed-off-by: Ye Bin <yebin10@huawei.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-05-01selftests/ftrace: add kprobe test cases for VFS type "%pd" and "%pD"Ye Bin1-0/+40
This patch adds test cases for new print format type "%pd/%pD".The test cases test the following items: 1. Test README if add "%pd/%pD" type; 2. Test "%pd" type for dput(); 3. Test "%pD" type for vfs_read(); This test case require enable CONFIG_HAVE_FUNCTION_ARG_ACCESS_API configuration. Link: https://lore.kernel.org/all/20240322064308.284457-5-yebin10@huawei.com/ Signed-off-by: Ye Bin <yebin10@huawei.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-05-01selftests/bpf: Drop start_server_proto helperGeliang Tang1-9/+2
Protocol can be set by __start_server() helper directly now, this makes the heler start_server_proto() useless. This patch drops it, and implenments start_server() using make_sockaddr() and __start_server(). Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Link: https://lore.kernel.org/r/55d8a04e0bb8240a5fda2da3e9bdffe6fc8547b2.1714014697.git.tanggeliang@kylinos.cn Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-05-01selftests/bpf: Make start_mptcp_server staticGeliang Tang3-9/+16
start_mptcp_server() shouldn't be a public helper, it only be used in MPTCP tests. This patch moves it into prog_tests/mptcp.c, and implenments it using make_sockaddr() and start_server_addr() instead of using start_server_proto(). Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Link: https://lore.kernel.org/r/50ec7049e280c60a2924937940851f8fee2b73b8.1714014697.git.tanggeliang@kylinos.cn Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-05-01selftests/bpf: Add opts argument for __start_serverGeliang Tang1-12/+15
This patch adds network_helper_opts parameter for __start_server() instead of "int protocol" and "int timeout_ms". This not only reduces the number of parameters, but also makes it more flexible. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Link: https://lore.kernel.org/r/127d2f0929980b41f757dcfebe1b667e6bfb43f1.1714014697.git.tanggeliang@kylinos.cn Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-04-30Merge tag 'kvmarm-fixes-6.9-2' of ↵Paolo Bonzini1-0/+49
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.9, part #2 - Fix + test for a NULL dereference resulting from unsanitised user input in the vgic-v2 device attribute accessors
2024-04-30cxl/test: Enhance event testingIra Weiny1-4/+15
An issue was found in the processing of event logs when the output buffer length was not reset.[1] This bug was not caught with cxl-test for 2 reasons. First, the test harness mbox_send command [mock_get_event()] does not set the output size based on the amount of data returned like the hardware command does. Second, the simplistic event log testing always returned the same number of elements per-get command. Enhance the simulation of the event log mailbox to better match the bug found with real hardware to cover potential regressions. NOTE: These changes will cause cxl-events.sh in ndctl to fail without the fix from Kwangjin. However, no changes to the user space test was required. Therefore ndctl itself will be compatible with old or new kernels once both patches land in the new kernel. [1] Link: https://lore.kernel.org/all/20240401091057.1044-1-kwangjin.ko@sk.com/ Cc: Kwangjin Ko <kwangjin.ko@sk.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240401-enhance-event-test-v1-1-6669a524ed38@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2024-04-30selftests/bpf: Add sockopt case to verify prog_typeStanislav Fomichev1-2/+38
Make sure only sockopt programs can be attached to the setsockopt and getsockopt hooks. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20240426231621.2716876-4-sdf@google.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-04-30selftests/bpf: Extend sockopt tests to use BPF_LINK_CREATEStanislav Fomichev1-6/+19
Run all existing test cases with the attachment created via BPF_LINK_CREATE. Next commit will add extra test cases to verify link_create attach_type enforcement. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20240426231621.2716876-3-sdf@google.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-04-30selftests/bpf: Add kprobe session cookie testJiri Olsa3-0/+94
Adding kprobe session test that verifies the cookie value get properly propagated from entry to return program. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240430112830.1184228-8-jolsa@kernel.org
2024-04-30selftests/bpf: Add kprobe session testJiri Olsa3-0/+120
Adding kprobe session test and testing that the entry program return value controls execution of the return probe program. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240430112830.1184228-7-jolsa@kernel.org
2024-04-30libbpf: Add kprobe session attach type name to attach_type_nameJiri Olsa1-0/+1
Adding kprobe session attach type name to attach_type_name, so libbpf_bpf_attach_type_str returns proper string name for BPF_TRACE_KPROBE_SESSION attach type. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240430112830.1184228-6-jolsa@kernel.org
2024-04-30libbpf: Add support for kprobe session attachJiri Olsa3-3/+41
Adding support to attach program in kprobe session mode with bpf_program__attach_kprobe_multi_opts function. Adding session bool to bpf_kprobe_multi_opts struct that allows to load and attach the bpf program via kprobe session. the attachment to create kprobe multi session. Also adding new program loader section that allows: SEC("kprobe.session/bpf_fentry_test*") and loads/attaches kprobe program as kprobe session. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240430112830.1184228-5-jolsa@kernel.org
2024-04-30bpf: Add support for kprobe session attachJiri Olsa1-0/+1
Adding support to attach bpf program for entry and return probe of the same function. This is common use case which at the moment requires to create two kprobe multi links. Adding new BPF_TRACE_KPROBE_SESSION attach type that instructs kernel to attach single link program to both entry and exit probe. It's possible to control execution of the bpf program on return probe simply by returning zero or non zero from the entry bpf program execution to execute or not the bpf program on return probe respectively. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240430112830.1184228-2-jolsa@kernel.org
2024-04-30selftests: drv-net-hw: add test for memory allocation failures with page poolJakub Kicinski3-0/+134
Bugs in memory allocation failure paths are quite common. Add a test exercising those paths based on qstat and page pool failure hook. Running on bnxt: # ./drivers/net/hw/pp_alloc_fail.py KTAP version 1 1..1 # ethtool -G change retval: success ok 1 pp_alloc_fail.test_pp_alloc # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0 I initially wrote this test to validate commit be43b7489a3c ("net/mlx5e: RX, Fix page_pool allocation failure recovery for striding rq") but mlx5 still doesn't have qstat. So I run it on bnxt, and while bnxt survives I found the problem fixed in commit 730117730709 ("eth: bnxt: fix counting packets discarded due to OOM and netpoll"). Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240429144426.743476-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-30selftests: drv-net: support generating iperf3 loadJakub Kicinski2-0/+42
While we are not very interested in testing performance it's useful to be able to generate a lot of traffic. iperf is the simplest way of getting relatively high PPS. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240429144426.743476-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-30selftests: net: py: avoid all ports < 10kJakub Kicinski1-1/+1
When picking TCP ports to use, avoid all below 10k. This should lower the chance of collision or running afoul whatever random policies may be on the host. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240429144426.743476-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-30selftests: net: py: extract tool logicJakub Kicinski1-3/+9
The main use of the ip() wrapper over cmd() is that it can parse JSON. cmd("ip -j link show") will return stdout as a string, and test has to call json.loads(). With ip("link show", json=True) the return value will be already parsed. More tools (ethtool, bpftool etc.) support the --json switch. To avoid having to wrap all of them individually create a tool() helper. Switch from -j to --json (for ethtool). While at it consume the netns attribute at the ip() level. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240429144426.743476-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-30selftests: drv-net-hw: support using Python from net hw testsJakub Kicinski4-3/+26
We created a separate directory for HW-only tests, recently. Glue in the Python test library there, Python is a bit annoying when it comes to using library code located "lower" in the directory structure. Reuse the Env class, but let tests require non-nsim setup. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240429144426.743476-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-30selftests: netfilter: avoid test timeouts on debug kernelsFlorian Westphal4-3/+10
Jakub reports that some tests fail on netdev CI when executed in a debug kernel. Increase test timeout to 30m, this should hopefully be enough. Also reduce test duration where possible for "slow" machines. Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20240429105736.22677-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-30ASoC: doc: dapm: various improvementsMark Brown44-1310/+2969
Merge series from Luca Ceresoli <luca.ceresoli@bootlin.com>: This series applies various improvements to the DAPM documentation: a rewrite of a few sections for clarity, style improvements and typo fixes. Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> --- Changes in v2: - avoid wrapping in patch 3 as suggested by Alex - Link to v1: https://lore.kernel.org/r/20240416-dapm-docs-v1-0-a818d2819bf6@bootlin.com --- Luca Ceresoli (12): ASoC: doc: dapm: fix typos ASoC: doc: dapm: fix struct name ASoC: doc: dapm: minor rewording ASoC: doc: dapm: remove dash after colon ASoC: doc: dapm: clarify it's an internal API ASoC: doc: dapm: replace "map" with "graph" ASoC: doc: dapm: extend initial descrption ASoC: doc: dapm: describe how widgets and routes are registered ASoC: doc: dapm: fix and improve section "Registering DAPM controls" ASoC: doc: dapm: improve section "Codec/DSP Widget Interconnections" ASoC: doc: dapm: update section "DAPM Widget Events" ASoC: doc: dapm: update event types Documentation/sound/soc/dapm-graph.svg | 375 +++++++++++++++++++++++++++++++++ Documentation/sound/soc/dapm.rst | 174 ++++++++++----- 2 files changed, 492 insertions(+), 57 deletions(-) --- base-commit: c942a0cd3603e34dd2d7237e064d9318cb7f9654 change-id: 20240315-dapm-docs-79bd51f267db Best regards, -- Luca Ceresoli <luca.ceresoli@bootlin.com>
2024-04-30selftests/bpf: Drop an unused local variableBenjamin Tissoires1-2/+0
Some copy/paste leftover, this is never used. Fixes: e3d9eac99afd ("selftests/bpf: wq: add bpf_wq_init() checks") Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/bpf/20240430-bpf-next-v3-3-27afe7f3b17c@kernel.org
2024-04-30netdev: add queue statsXuan Zhuo1-0/+19
These stats are commonly. Support reporting those via netdev-genl queue stats. name: rx-hw-drops name: rx-hw-drop-overruns name: rx-csum-unnecessary name: rx-csum-none name: rx-csum-bad name: rx-hw-gro-packets name: rx-hw-gro-bytes name: rx-hw-gro-wire-packets name: rx-hw-gro-wire-bytes name: rx-hw-drop-ratelimits name: tx-hw-drops name: tx-hw-drop-errors name: tx-csum-none name: tx-needs-csum name: tx-hw-gso-packets name: tx-hw-gso-bytes name: tx-hw-gso-wire-packets name: tx-hw-gso-wire-bytes name: tx-hw-drop-ratelimits Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-30selftests/bpf: validate nulled-out struct_ops program is handled properlyAndrii Nakryiko2-2/+23
Add a selftests validating that it's possible to have some struct_ops callback set declaratively, then disable it (by setting to NULL) programmatically. Libbpf should detect that such program should not be loaded. Otherwise, it will unnecessarily fail the loading when the host kernel does not have the type information. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240428030954.3918764-2-andrii@kernel.org Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-04-30libbpf: handle nulled-out program in struct_ops correctlyAndrii Nakryiko1-0/+1
If struct_ops has one of program callbacks set declaratively and host kernel is old and doesn't support this callback, libbpf will allow to load such struct_ops as long as that callback was explicitly nulled-out (presumably through skeleton). This is all working correctly, except we won't reset corresponding program slot to NULL before bailing out, which will lead to libbpf not detecting that BPF program has to be not auto-loaded. Fix this by unconditionally resetting corresponding program slot to NULL. Fixes: c911fc61a7ce ("libbpf: Skip zeroed or null fields if not found in the kernel type.") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240428030954.3918764-1-andrii@kernel.org Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-04-30selftests/bpf: Free strdup memory in veristatGeliang Tang1-1/+4
The strdup() function returns a pointer to a new string which is a duplicate of the string "input". Memory for the new string is obtained with malloc(), and need to be freed with free(). This patch adds these missing "free(input)" in parse_stats() to avoid memory leak in veristat.c. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/ded44f8865cd7f337f52fc5fb0a5fbed7d6bd641.1714374022.git.tanggeliang@kylinos.cn
2024-04-30selftests/bpf: Free strdup memory in test_sockmapGeliang Tang1-2/+8
The strdup() function returns a pointer to a new string which is a duplicate of the string "ptr". Memory for the new string is obtained with malloc(), and need to be freed with free(). This patch adds these missing "free(ptr)" in check_whitelist() and check_blacklist() to avoid memory leaks in test_sockmap.c. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/b76f2f4c550aebe4ab8ea73d23c4cbe4f06ea996.1714374022.git.tanggeliang@kylinos.cn
2024-04-30selftests/bpf: Run cgroup1_hierarchy test in own mount namespaceViktor Malik2-1/+9
The cgroup1_hierarchy test uses setup_classid_environment to setup cgroupv1 environment. The problem is that the environment is set in /sys/fs/cgroup and therefore, if not run under an own mount namespace, effectively deletes all system cgroups: $ ls /sys/fs/cgroup | wc -l 27 $ sudo ./test_progs -t cgroup1_hierarchy #41/1 cgroup1_hierarchy/test_cgroup1_hierarchy:OK #41/2 cgroup1_hierarchy/test_root_cgid:OK #41/3 cgroup1_hierarchy/test_invalid_level:OK #41/4 cgroup1_hierarchy/test_invalid_cgid:OK #41/5 cgroup1_hierarchy/test_invalid_hid:OK #41/6 cgroup1_hierarchy/test_invalid_cgrp_name:OK #41/7 cgroup1_hierarchy/test_invalid_cgrp_name2:OK #41/8 cgroup1_hierarchy/test_sleepable_prog:OK #41 cgroup1_hierarchy:OK Summary: 1/8 PASSED, 0 SKIPPED, 0 FAILED $ ls /sys/fs/cgroup | wc -l 1 To avoid this, run setup_cgroup_environment first which will create an own mount namespace. This only affects the cgroupv1_hierarchy test as all other cgroup1 test progs already run setup_cgroup_environment prior to running setup_classid_environment. Also add a comment to the header of setup_classid_environment to warn against this invalid usage in future. Fixes: 360769233cc9 ("selftests/bpf: Add selftests for cgroup1 hierarchy") Signed-off-by: Viktor Malik <vmalik@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240429112311.402497-1-vmalik@redhat.com
2024-04-30bpf: Fix verifier assumptions about socket->skAlexei Starovoitov3-13/+20
The verifier assumes that 'sk' field in 'struct socket' is valid and non-NULL when 'socket' pointer itself is trusted and non-NULL. That may not be the case when socket was just created and passed to LSM socket_accept hook. Fix this verifier assumption and adjust tests. Reported-by: Liam Wisehart <liamwisehart@meta.com> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Fixes: 6fcd486b3a0a ("bpf: Refactor RCU enforcement in the verifier.") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20240427002544.68803-1-alexei.starovoitov@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-04-29Merge tag 'for-netdev' of ↵Jakub Kicinski114-1882/+7165
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2024-04-29 We've added 147 non-merge commits during the last 32 day(s) which contain a total of 158 files changed, 9400 insertions(+), 2213 deletions(-). The main changes are: 1) Add an internal-only BPF per-CPU instruction for resolving per-CPU memory addresses and implement support in x86 BPF JIT. This allows inlining per-CPU array and hashmap lookups and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko. 2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song. 3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various atomics in bpf_arena which can be JITed as a single x86 instruction, from Alexei Starovoitov. 4) Add support for passing mark with bpf_fib_lookup helper, from Anton Protopopov. 5) Add a new bpf_wq API for deferring events and refactor sleepable bpf_timer code to keep common code where possible, from Benjamin Tissoires. 6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs to check when NULL is passed for non-NULLable parameters, from Eduard Zingerman. 7) Harden the BPF verifier's and/or/xor value tracking, from Harishankar Vishwanathan. 8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel crypto subsystem, from Vadim Fedorenko. 9) Various improvements to the BPF instruction set standardization doc, from Dave Thaler. 10) Extend libbpf APIs to partially consume items from the BPF ringbuffer, from Andrea Righi. 11) Bigger batch of BPF selftests refactoring to use common network helpers and to drop duplicate code, from Geliang Tang. 12) Support bpf_tail_call_static() helper for BPF programs with GCC 13, from Jose E. Marchesi. 13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF program to have code sections where preemption is disabled, from Kumar Kartikeya Dwivedi. 14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs, from David Vernet. 15) Extend the BPF verifier to allow different input maps for a given bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu. 16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan. 17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison the stack memory, from Martin KaFai Lau. 18) Improve xsk selftest coverage with new tests on maximum and minimum hardware ring size configurations, from Tushar Vyavahare. 19) Various ReST man pages fixes as well as documentation and bash completion improvements for bpftool, from Rameez Rehman & Quentin Monnet. 20) Fix libbpf with regards to dumping subsequent char arrays, from Quentin Deslandes. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits) bpf, docs: Clarify PC use in instruction-set.rst bpf_helpers.h: Define bpf_tail_call_static when building with GCC bpf, docs: Add introduction for use in the ISA Internet Draft selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args selftests/bpf: dummy_st_ops should reject 0 for non-nullable params bpf: check bpf_dummy_struct_ops program params for test runs selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops selftests/bpf: adjust dummy_st_ops_success to detect additional error bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable selftests/bpf: Add ring_buffer__consume_n test. bpf: Add bpf_guard_preempt() convenience macro selftests: bpf: crypto: add benchmark for crypto functions selftests: bpf: crypto skcipher algo selftests bpf: crypto: add skcipher to bpf crypto bpf: make common crypto API for TC/XDP programs bpf: update the comment for BTF_FIELDS_MAX selftests/bpf: Fix wq test. selftests/bpf: Use make_sockaddr in test_sock_addr selftests/bpf: Use connect_to_addr in test_sock_addr ... ==================== Link: https://lore.kernel.org/r/20240429131657.19423-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-29KVM: selftests: Drop @selector from segment helpersSean Christopherson1-15/+14
Drop the @selector from the kernel code, data, and TSS builders and instead hardcode the respective selector in the helper. Accepting a selector but not a base makes the selector useless, e.g. the data helper can't create per-vCPU for FS or GS, and so loading GS with KERNEL_DS is the only logical choice. And for code and TSS, there is no known reason to ever want multiple segments, e.g. there are zero plans to support 32-bit kernel code (and again, that would require more than just the selector). If KVM selftests ever do add support for per-vCPU segments, it'd arguably be more readable to add a dedicated helper for building/setting the per-vCPU segment, and move the common data segment code to an inner helper. Lastly, hardcoding the selector reduces the probability of setting the wrong selector in the vCPU versus what was created by the VM in the GDT. Reviewed-by: Ackerley Tng <ackerleytng@google.com> Link: https://lore.kernel.org/r/20240314232637.2538648-19-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-04-29KVM: selftests: Init x86's segments during VM creationSean Christopherson1-48/+20
Initialize x86's various segments in the GDT during creation of relevant VMs instead of waiting until vCPUs come along. Re-installing the segments for every vCPU is both wasteful and confusing, as is installing KERNEL_DS multiple times; NOT installing KERNEL_DS for GS is icing on the cake. Reviewed-by: Ackerley Tng <ackerleytng@google.com> Link: https://lore.kernel.org/r/20240314232637.2538648-18-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 06:30:21 +0300