| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This change introduces a fix to symbols__find, so that it is able to
find symbols of length zero (where start == end).
The current code has the following problem:
- The current implementation of symbols__find is unable to find any symbols
of length zero.
- The db-export framework explicitly creates zero length symbols at
locations where no symbol currently exists.
The combination of the two above behaviors results in behavior similar
to the example below.
1. addr_location is created for a sample, but symbol is unable to be
resolved.
2. db export creates an "unknown" symbol of length zero at that address
and inserts it into the dso.
3. A new sample comes in at the same address, but symbol__find is unable
to find the zero length symbol, so it is still unresolved.
4. db export sees the symbol is unresolved, and allocated a duplicate
symbol, even though it already did this in step 2.
This behavior continues every time an address without symbol information
is seen, which causes a very large number of these symbols to be
allocated.
The effect of this fix can be observed by looking at the contents of an
exported database before/after the fix (generated with
scripts/python/export-to-postgresql.py)
Ex.
BEFORE THE CHANGE:
example_db=# select count(*) from symbols;
count
--------
900213
(1 row)
example_db=# select count(*) from symbols where symbols.name='unknown';
count
--------
897355
(1 row)
example_db=# select count(*) from symbols where symbols.name!='unknown';
count
-------
2858
(1 row)
AFTER THE CHANGE:
example_db=# select count(*) from symbols;
count
-------
25217
(1 row)
example_db=# select count(*) from symbols where name='unknown';
count
-------
22359
(1 row)
example_db=# select count(*) from symbols where name!='unknown';
count
-------
2858
(1 row)
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1462612620-25008-1-git-send-email-cphlipot0@gmail.com
[ Moved the test to later in the rb_tree tests, as this not the likely case ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now we can see if it is set when using verbose mode in various tools,
such as 'perf test':
# perf test -vv back
45: Test backward reading from ring buffer :
--- start ---
<SNIP>
------------------------------------------------------------
perf_event_attr:
type 2
size 112
config 0x98
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|CPU|PERIOD|RAW
disabled 1
mmap 1
comm 1
task 1
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
write_backward 1
------------------------------------------------------------
sys_perf_event_open: pid 20911 cpu -1 group_fd -1 flags 0x8
<SNIP>
---- end ----
Test backward reading from ring buffer: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-kxv05kv9qwl5of7rzfeiiwbv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This test checks reading from backward ring buffer.
Test result:
# ~/perf test 'ring buffer'
45: Test backward reading from ring buffer : Ok
The test case is a while loop which calls prctl(PR_SET_NAME) multiple
times. Each prctl should issue 2 events: one PERF_RECORD_SAMPLE, one
PERF_RECORD_COMM.
The first round creates a relative large ring buffer (256 pages). It can
afford all events. Read from it and check the count of each type of
events.
The second round creates a small ring buffer (1 page) and makes it
overwritable. Check the correctness of the buffer.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1462758471-89706-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf_evlist__mmap_read_backward() is introduced for reading backward
ring buffer. Since direction for reading such ring buffer is different
from the direction kernel writing to it, and since user need to fetch
most recent record from it, a perf_evlist__mmap_read_catchup() is
introduced to move the reading pointer to the end of the buffer.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1462758471-89706-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fix the error message printed when attempting and failing to create the
call path root incorrectly references the call return process.
This change fixes the message to properly reference the failure to
create the call path root.
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1462612620-25008-2-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Scale values by unit before passing them to the metrics printing
functions. This is needed for TopDown, because it needs to scale the
slots correctly by pipeline width / SMTness.
For existing metrics it shouldn't make any difference, as those
generally use events that don't have any units.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1462489447-31832-8-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There is no need to check for DWARF unwinding support when using the
'dwarf' callchain record method, as this will only ask the kernel to
collect stack dumps for later DWARF CFI processing, which can be done in
another machine, where the support for DWARF unwinding need to be
present.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1462525154-125656-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To reduce the size of builtin-trace.c.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vb8dpy7bptkf219q5c25ulfp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To reduce the size of builtin-trace.c.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jt293541hv9od7gqw6lilioh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To reduce the size of builtin-trace.c.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qecqxwwtreio6eaatfv58yq5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add debug output of raw counter values per CPU when perf stat -v is
specified, together with their cpu numbers. This is very useful to
debug problems with per core counters, where we can normally only see
aggregated values.
v2: Make it depend on -vv, not -v
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461787251-6702-12-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Update the export-to-postgresql.py to support the newly introduced
callchain export.
callchains are added into the existing call_paths table and can now
be associated with samples when the "callpaths" commandline option
is used with the script.
Ex.:
$ perf script -s export-to-postgresql.py example_db all callchains
Includes the following changes to enable callchain export via the python export
APIs:
- Add the "callchains" commandline option, which is used to enable
callchain export by setting the perf_db_export_callchains global
- Add perf_db_export_callchains checks for call_path table creation
and population.
- Add call_path_id to samples_table to conform with the new API
example usage and output using a small test app:
test_app.c:
volatile int x = 0;
void inc_x_loop()
{
int i;
for(i=0; i<100000000; i++)
x++;
}
void a()
{
inc_x_loop();
}
void b()
{
inc_x_loop();
}
int main()
{
a();
b();
return 0;
}
example usage:
$ gcc -g -O0 test_app.c
$ perf record --call-graph=dwarf ./a.out
[ perf record: Woken up 77 times to write data ]
[ perf record: Captured and wrote 19.373 MB perf.data (2404 samples) ]
$ perf script -s scripts/python/export-to-postgresql.py
example_db all callchains
$ psql example_db
example_db=#
SELECT
(SELECT name FROM symbols WHERE id = cps.symbol_id) as symbol,
(SELECT name FROM symbols WHERE id =
(SELECT symbol_id from call_paths where id = cps.parent_id))
as parent_symbol,
sum(period) as event_count
FROM samples join call_paths as cps on call_path_id = cps.id
GROUP BY cps.id,evsel_id
ORDER BY event_count DESC
LIMIT 5;
symbol | parent_symbol | event_count
------------------+--------------------------+-------------
inc_x_loop | a | 734250982
inc_x_loop | b | 731028057
unknown | unknown | 1335858
task_tick_fair | scheduler_tick | 1238842
update_wall_time | tick_do_update_jiffies64 | 650373
(5 rows)
The above data shows total "self time" in cycles for each call path that was
sampled. It is intended to demonstrate how it accounts separately for the two
ways to reach the "inc_x_loop" function(via "a" and "b"). Recursive common
table expressions can be used as well to get cumulative time spent in a
function as well, but that is beyond the scope of this basic example.
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461831551-12213-7-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This change allows python scripts to be able to utilize the recent
changes to the db export api allowing the export of call_paths derived
from sampled callchains. These call paths are also now associated with
the samples from which they were derived.
- This feature is enabled by setting "perf_db_export_callchains" to true
- When enabled, samples that have callchain information will have the
callchains exported via call_path_table
- The call_path_id field is added to sample_table to enable association of
samples with the corresponding callchain stored in the call paths
table. A call_path_id of 0 will be exported if there is no
corresponding callchain.
- When "perf_db_export_callchains" and "perf_db_export_calls" are both
set to True, the call path root data structure will be shared. This
prevents duplicating of data and call path ids that would result from
building two separate call path trees in memory.
- The call_return_processor structure definition was relocated to the header
file to make its contents visible to db-export.c. This enables the
sharing of call path trees between the two features, as mentioned
above.
This change is visible to python scripts using the python db export api.
The change is backwards compatible with scripts written against the
previous API, assuming that the scripts model the sample_table function
after the one in export-to-postgresql.py script by allowing for
additional arguments to be added in the future. ie. using *x as the
final argument of the sample_table function.
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461831551-12213-6-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The exported sample now contains a reference to the call_path_id that
represents its callchain.
While callchains themselves are nice to have, being able to associate
them with samples makes them much more useful, and can allow for such
things as determining how much cumulative time is spent in a particular
function. This information is normally possible to get from the call
return processor. However, when doing normal sampling, call/return
information is not available, thus necessitating the need for
associating samples directly with call paths.
This commit include changes to db-export layer to make this information
available for subsequent patches in this change set, but by itself, does
not make any changes visible to the user.
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461831551-12213-5-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This change enables the db export api to export callchains. This is
accomplished by adding callchains obtained from samples to the
call_path_root structure and exporting them via the current call path
export API.
While the current API does support exporting call paths, this is not
supported when sampling. This commit addresses that missing feature by
allowing the export of call paths when callchains are present in
samples.
Summary:
- This feature is activated by initializing the call_path_root member
inside the db_export structure to a non-null value.
- Callchains are resolved with thread__resolve_callchain() and then stored
and exported by adding a call path under call path root.
- Symbol and DSO for each callchain node are exported via db_ids_from_al()
This commit puts in place infrastructure to be used by subsequent commits,
and by itself, does not introduce any user-visible changes.
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461831551-12213-4-git-send-email-cphlipot0@gmail.com
[ Made adjustments suggested by Adrian Hunter, see thread via this cset's Link: tag ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the call path handling code out of thread-stack.c and
thread-stack.h to allow other components that are not part of
thread-stack to create call paths.
Summary:
- Create call-path.c and call-path.h and add them to the build.
- Move all call path related code out of thread-stack.c and thread-stack.h
and into call-path.c and call-path.h.
- A small subset of structures and functions are now visible through
call-path.h, which is required for thread-stack.c to continue to
compile.
This change is a prerequisite for subsequent patches in this change set
and by itself contains no user-visible changes.
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461831551-12213-3-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The existing implementation of thread__resolve_callchain, under certain
circumstances, can assemble callchain entries in the incorrect order.
The callchain entries are resolved incorrectly for a sample when all of
the following conditions are met:
1. callchain_param.order is set to ORDER_CALLER
2. thread__resolve_callchain_sample is able to resolve callchain entries
for the sample.
3. unwind__get_entries is also able to resolve callchain entries for the
sample.
The fix is accomplished by reversing the order in which
thread__resolve_callchain_sample and unwind__get_entries are called when
callchain_param.order is set to ORDER_CALLER.
Unwind specific code from thread__resolve_callchain is also moved into a
new static function to improve readability of the fix.
How to Reproduce the Existing Bug:
Modifying perf script to print call trees in the opposite order or
applying the remaining patches from this series and comparing the
results output from export-to-postgtresql.py are the easiest ways to see
the bug, however it can still be seen in current builds using perf
report.
Here is how i can reproduce the bug using perf report:
# perf record --call-graph=dwarf stress -c 1 -t 5
when i run this command:
# perf report --call-graph=flat,0,0,callee
This callchain, containing kernel (handle_irq_event, etc) and userspace
samples (__libc_start_main, etc) is contained in the output, which looks
correct (callee order):
gen8_irq_handler
handle_irq_event_percpu
handle_irq_event
handle_edge_irq
handle_irq
do_IRQ
ret_from_intr
__random
rand
0x558f2a04dded
0x558f2a04c774
__libc_start_main
0x558f2a04dcd9
Now run this command using caller order:
# perf report --call-graph=flat,0,0,caller
It is expected to see the exact reverse of the above when using caller
order (with "0x558f2a04dcd9" at the top and "gen8_irq_handler" at the
bottom) in the output, but it is nowhere to be found.
instead you see this:
ret_from_intr
do_IRQ
handle_irq
handle_edge_irq
handle_irq_event
handle_irq_event_percpu
gen8_irq_handler
0x558f2a04dcd9
__libc_start_main
0x558f2a04c774
0x558f2a04dded
rand
__random
Notice how internally the kernel symbols are reversed and the user space
symbols are reversed, but the kernel symbols still appear above the user
space symbols.
if this patch is applied and perf script is re-run, you will see the
expected output (with "0x558f2a04dcd9" at the top and "gen8_irq_handler"
at the bottom):
0x558f2a04dcd9
__libc_start_main
0x558f2a04c774
0x558f2a04dded
rand
__random
ret_from_intr
do_IRQ
handle_irq
handle_edge_irq
handle_irq_event
handle_irq_event_percpu
gen8_irq_handler
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461831551-12213-2-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The test to check if the arg format had been read from the
syscall:sys_enter_name/format file was looking at the list of non-commom
fields, and if that is empty, it would think it had failed to read it,
because it doesn't exist, for instance, for the clone() syscall.
So instead before dumping the raw syscall args list check
IS_ERR(sc->tp_format), if that is true, then an attempt was made to read
the format file and failed, in which case dump the raw arg list values.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ls7pmdqb2xy9339vdburwvnk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In perf_mmap__read(), give better names to pointers. Original name 'old'
and 'head' directly related to pointers in ring buffer control page. For
backward ring buffer, the meaning of 'head' point is not 'the first byte
of free space', but 'the first byte of the last record'. To reduce
confusion, rename 'old' to 'start', 'head' to 'end'. 'start' -> 'end'
is the direction the records should be read from.
Change parameter order.
Change 'overwrite' to 'check_messup'. When reading from 'head', no need
to check messup for for backward ring buffer.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1461723563-67451-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Extract event reader from perf_evlist__mmap_read() to perf__mmap_read().
Future commit will feed it with manually computed 'head' and 'old'
pointers.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1461723563-67451-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
ppc64le functions have a Global Entry Point (GEP) and a Local Entry
Point (LEP). While placing a probe, we always prefer the LEP since it
catches function calls through both the GEP and the LEP. In order to do
this, we fixup the function entry points during elf symbol table lookup
to point to the LEPs. This works, but breaks 'perf test kallsyms' since
the symbols loaded from the symbol table (pointing to the LEP) do not
match the symbols in kallsyms.
To fix this, we do not adjust all the symbols during symbol table load.
Instead, we note down st_other in a newly introduced arch-specific
member of perf symbol structure, and later use this to adjust the probe
trace point.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Mark Wielaard <mjw@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/6be7c2b17e370100c2f79dd444509df7929bdd3e.1460451721.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So far, we used to treat probe point offsets as being offset from the
LEP. However, userspace applications (objdump/readelf) always show
disassembly and offsets from the function GEP. This is confusing to the
user as we will end up probing at an address different from what the
user expects when looking at the function disassembly with
readelf/objdump. Fix this by changing how we modify probe address with
perf.
If only the function name is provided, we assume the user needs the LEP.
Otherwise, if an offset is specified, we assume that the user knows the
exact address to probe based on function disassembly, and so we just
place the probe from the GEP offset.
Finally, kretprobe was also broken with kallsyms as we were trying to
specify an offset. This patch also fixes that issue.
Reported-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Mark Wielaard <mjw@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/75df860aad8216bf4b9bcd10c6351ecc0e3dee54.1460451721.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now we have sort dimensions private for struct hists,
we need to make dimension booleans hists specific as
well.
Moving sort__has_comm into struct perf_hpp_list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now we have sort dimensions private for struct hists, we need to make
dimension booleans hists specific as well.
Moving sort__has_thread into struct perf_hpp_list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now we have sort dimensions private for struct hists, we need to make
dimension booleans hists specific as well.
Moving sort__has_socket into struct perf_hpp_list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now we have sort dimensions private for struct hists, we need to make
dimension booleans hists specific as well.
Moving sort__has_dso into struct perf_hpp_list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now we have sort dimensions private for struct hists, we need to make
dimension booleans hists specific as well.
Moving sort__has_sym into struct perf_hpp_list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now we have sort dimensions private for struct hists, we need to make
dimension booleans hists specific as well.
Moving sort__has_parent into struct perf_hpp_list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now we have sort dimensions private for struct hists, we need to make
dimension booleans hists specific as well.
Moving sort__need_collapse into struct perf_hpp_list.
Adding hists__has macro to easily access this info perf struct hists
object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Generalize existing macros to serve the purpose.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1462461799-17518-1-git-send-email-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
That field is only updated when we use the "sched:sched_stat_runtime"
tracepoint, and that is only done so far when we use the '--stat' command line
option, without it we get just zeros, confusing the users:
Without this patch:
# trace -a -s sleep 1
<SNIP>
qemu-system-x86 (9931), 468 events, 9.6%, 0.000 msec
syscall calls total min avg max stddev
(msec) (msec) (msec) (msec) (%)
---------- ------ --------- --------- --------- --------- ------
ppoll 98 982.374 0.000 10.024 29.983 12.65%
write 34 0.401 0.005 0.012 0.027 5.49%
ioctl 102 0.347 0.002 0.003 0.007 3.08%
firefox (10871), 1856 events, 38.2%, 0.000 msec
(msec) (msec) (msec) (msec) (%)
---------- ------ --------- --------- --------- --------- ------
poll 395 934.873 0.000 2.367 17.120 11.51%
recvmsg 395 0.988 0.001 0.003 0.021 4.20%
read 106 0.460 0.002 0.004 0.007 3.17%
futex 24 0.108 0.001 0.004 0.010 10.05%
mmap 2 0.041 0.016 0.021 0.026 23.92%
write 6 0.027 0.004 0.004 0.005 2.52%
After this patch that ', 0.000 msecs' gets suppressed when --stat is not
in use.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-p7emqrsw7900tdkg43v9l1e1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
# trace -a -s sleep 1
<SNIP>
Xorg (1965), 788 events, 19.0%, 0.000 msec
syscall calls total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- --------- --------- --------- --------- ------
select 89 731.038 0.000 8.214 175.218 36.71%
ioctl 22 0.661 0.010 0.030 0.072 10.43%
writev 42 0.253 0.002 0.006 0.011 5.94%
recvmsg 60 0.185 0.001 0.003 0.009 5.90%
setitimer 60 0.127 0.001 0.002 0.006 6.14%
read 52 0.102 0.001 0.002 0.005 8.55%
rt_sigprocmask 45 0.092 0.001 0.002 0.023 23.65%
poll 12 0.021 0.001 0.002 0.003 7.21%
epoll_wait 12 0.019 0.001 0.002 0.002 2.71%
firefox (10871), 1080 events, 26.1%, 0.000 msec
syscall calls total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- --------- --------- --------- --------- ------
poll 240 979.562 0.000 4.082 17.132 11.33%
recvmsg 240 0.532 0.001 0.002 0.007 3.69%
read 60 0.303 0.003 0.005 0.029 8.50%
Suggested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-52kdkuyxihq0kvc0n2aalhay@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
# trace -a -s sleep 1 |& grep events | tail
gmain (1733), 34 events, 1.0%, 0.000 msec
hexchat (9765), 46 events, 1.4%, 0.000 msec
ssh (11109), 80 events, 2.4%, 0.000 msec
sleep (32631), 81 events, 2.4%, 0.000 msec
qemu-system-x86 (10021), 272 events, 8.2%, 0.000 msec
Xorg (1965), 322 events, 9.7%, 0.000 msec
SoftwareVsyncTh (10922), 366 events, 11.1%, 0.000 msec
gnome-shell (2231), 446 events, 13.5%, 0.000 msec
qemu-system-x86 (9931), 468 events, 14.1%, 0.000 msec
firefox (10871), 1098 events, 33.2%, 0.000 msec
[root@jouet ~]#
Suggested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ye4cnprhfeiq32ar4lt60dqs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Sometimes we want to sort an existing rbtree by a different key,
introduce a template for that, that needs only to be provided the
rbtree root and the number of entries in it.
To do that a new rbtree will be created with extra space for each entry,
where possibly pre-calculated keys will be stored to be used in the
resort process and also later, when using the newly sorted rbtree.
Please check the following two changesets to see it in use for resorting
stats for threads and its syscalls in 'perf trace --summary'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-9l6e1q34lmf3wwdeewstyakg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To be used, for instance, for pre-allocating an rb_tree array for
sorting by other keys besides the current pid one.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ja0ifkwue7ttjhbwijn6g6eu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Using sizeof on a malloced pointer type will return the wordsize which
can often cause one to allocate a buffer much smaller than it is needed.
So, here do not use sizeof on pointer type.
Note that this has no effect on runtime because 'dsos' is a pointer to a
pointer.
Problem found using Coccinelle.
Signed-off-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461862017-23358-1-git-send-email-vaishali.thakkar@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To reduce the size of builtin-trace.c.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-11zxg3qitk6bw2x30135k9z4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With 'perf record --switch-output' without -a, record__synthesize() in
record__switch_output() won't generate tracking events because there's
no thread_map in evlist. Which causes newly created perf.data doesn't
contain map and comm information.
This patch creates a fake thread_map and directly call
perf_event__synthesize_thread_map() for those events.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1461178794-40467-8-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The cost of buildid cache processing is high: reading all events in
output perf.data, opening each elf file to read buildids then copying
them into ~/.debug directory. In switch output mode, these heavy works
block perf from receiving perf events for too long.
Enable no-buildid and no-buildid-cache by default if --switch-output is
provided. Still allow user use --no-no-buildid to explicitly enable
buildid in this case.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1461178794-40467-6-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
[ Updated man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Without this patch, the last output doesn't have timestamp appended if
--timestamp-filename is not explicitly provided. For example:
# perf record -a --switch-output &
[1] 11224
# kill -s SIGUSR2 11224
[ perf record: dump data: Woken up 1 times ]
# [ perf record: Dump perf.data.2015122622372823 ]
# fg
perf record -a --switch-output
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.027 MB perf.data (540 samples) ]
# ls -l
total 836
-rw------- 1 root root 33256 Dec 26 22:37 perf.data <---- *Odd*
-rw------- 1 root root 817156 Dec 26 22:37 perf.data.2015122622372823
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1461178794-40467-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
[ Updated man page, that also got an entry for --timestamp-filename ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Allow 'perf record' to split its output into multiple files.
For example:
# ~/perf record -a --timestamp-filename --switch-output &
[1] 10763
# kill -s SIGUSR2 10763
[ perf record: dump data: Woken up 1 times ]
# [ perf record: Dump perf.data.2015122622314468 ]
# kill -s SIGUSR2 10763
[ perf record: dump data: Woken up 1 times ]
# [ perf record: Dump perf.data.2015122622314762 ]
# kill -s SIGUSR2 10763
[ perf record: dump data: Woken up 1 times ]
#[ perf record: Dump perf.data.2015122622315171 ]
# fg
perf record -a --timestamp-filename --switch-output
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Dump perf.data.2015122622315513 ]
[ perf record: Captured and wrote 0.014 MB perf.data.<timestamp> (296 samples) ]
# ls -l
total 920
-rw------- 1 root root 797692 Dec 26 22:31 perf.data.2015122622314468
-rw------- 1 root root 59960 Dec 26 22:31 perf.data.2015122622314762
-rw------- 1 root root 59912 Dec 26 22:31 perf.data.2015122622315171
-rw------- 1 root root 19220 Dec 26 22:31 perf.data.2015122622315513
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1461178794-40467-4-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
[ Added man page entry, used the re-synthesize patch in this series as a fixup ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
auxtrace_snapshot_state matches the trigger model. Use trigger to
implement it. auxtrace_snapshot_state and auxtrace_snapshot_err are
absorbed.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1461178794-40467-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use 'trigger' to model operations which need to be executed when an
event (a signal, for example) is observed.
States and transits:
OFF--(on)--> READY --(hit)--> HIT
^ |
| (ready)
| |
\_____________/
is_hit and is_ready are two key functions to query the state of a
trigger. is_hit means the event already happen; is_ready means the
trigger is waiting for the event.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1461178794-40467-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Replace many fixed-length char array with strbuf to stringify
perf_probe_event and probe_trace_event etc.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160427183713.23446.97377.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The error messages returned by this method should not have an ending
newline, fix the two cases where it was.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8af0pazzhzl3dluuh8p7ar7p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When the kernel allows tweaking perf_event_max_stack and the event being
setup has PERF_SAMPLE_CALLCHAIN in its perf_event_attr.sample_type, tell
the user that tweaking /proc/sys/kernel/perf_event_max_stack may solve
the problem.
Before:
# echo 32000 > /proc/sys/kernel/perf_event_max_stack
# perf record -g usleep 1
Error:
The sys_perf_event_open() syscall returned with 12 (Cannot allocate memory) for event (cycles:ppp).
/bin/dmesg may provide additional information.
No CONFIG_PERF_EVENTS=y kernel support configured?
#
After:
# echo 64000 > /proc/sys/kernel/perf_event_max_stack
# perf record -g usleep 1
Error:
Not enough memory to setup event with callchain.
Hint: Try tweaking /proc/sys/kernel/perf_event_max_stack
Hint: Current value: 64000
#
Suggested-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ebv0orelj1s1ye857vhb82ov@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Coverity flagged this under CID 1354884 as a sizeof mismatch, it turns
out that the argument "attr" passed to syscall should have been a
pointer to attr in the first place.
Reported-by: coverity (CID 1354884)
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Fixes: 8f9e05fb298f ("perf tools: Fix PowerPC native building")
Link: http://lkml.kernel.org/r/1461551694-5512-3-git-send-email-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Assigning "attr" to "attr" does not have any effect, but was caught by
Coverity, so let's remove this.
Reported-by: coverity (CID 1354720)
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Fixes: 1b76c13e4b36 ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Link: http://lkml.kernel.org/r/1461551694-5512-2-git-send-email-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
/proc/sys/kernel/perf_event_max_stack
There is an upper limit to what tooling considers a valid callchain,
and it was tied to the hardcoded value in the kernel,
PERF_MAX_STACK_DEPTH (127), now that this can be tuned via a sysctl,
make it read it and use that as the upper limit, falling back to
PERF_MAX_STACK_DEPTH for kernels where this sysctl isn't present.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-yjqsd30nnkogvj5oyx9ghir9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
