summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2023-12-08selftests/sgx: Skip non X86_64 platformZhao Mengmeng1-1/+1
When building whole selftests on arm64, rsync gives an erorr about sgx: rsync: [sender] link_stat "/root/linux-next/tools/testing/selftests/sgx/test_encl.elf" failed: No such file or directory (2) rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1327) [sender=3.2.5] The root casue is sgx only used on X86_64, and shall be skipped on other platforms. Fix this by moving TEST_CUSTOM_PROGS and TEST_FILES inside the if check, then the build result will be "Skipping non-existent dir: sgx". Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX") Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/all/20231206025605.3965302-1-zhaomzhao%40126.com
2023-12-08selftests/sgx: Remove incomplete ABI sanitization code in test enclaveJo Van Bulck1-13/+3
As the selftest enclave is *not* intended for production, simplify the code by not initializing CPU configuration registers as expected by the ABI on enclave entry or cleansing caller-save registers on enclave exit. Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/all/da0cfb1e-e347-f7f2-ac72-aec0ee0d867d@intel.com/ Link: https://lore.kernel.org/all/20231005153854.25566-14-jo.vanbulck%40cs.kuleuven.be
2023-12-08selftests/sgx: Discard unsupported ELF sectionsJo Van Bulck1-0/+2
Building the test enclave with -static-pie may produce a dynamic symbol table, but this is not supported for enclaves and any relocations need to happen manually (e.g., as for "encl_op_array"). Thus, opportunistically discard ".dyn*" and ".gnu.hash" which the enclave loader cannot handle. Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/all/20231005153854.25566-13-jo.vanbulck%40cs.kuleuven.be
2023-12-08selftests/sgx: Ensure expected location of test enclave bufferJo Van Bulck3-4/+6
The external tests manipulating page permissions expect encl_buffer to be placed at the start of the test enclave's .data section. As this is not guaranteed per the C standard, explicitly place encl_buffer in a separate section that is explicitly placed at the start of the .data segment in the linker script to avoid the compiler placing it somewhere else in .data. Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Kai Huang <kai.huang@intel.com> Link: https://lore.kernel.org/all/20231005153854.25566-12-jo.vanbulck%40cs.kuleuven.be
2023-12-08selftests/sgx: Ensure test enclave buffer is entirely preservedJo Van Bulck2-4/+6
Attach the "used" attribute to instruct the compiler to preserve the static encl_buffer, even if it appears it is not entirely referenced in the enclave code, as expected by the external tests manipulating page permissions. Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Kai Huang <kai.huang@intel.com> Link: https://lore.kernel.org/all/a2732938-f3db-a0af-3d68-a18060f66e79@cs.kuleuven.be/ Link: https://lore.kernel.org/all/20231005153854.25566-11-jo.vanbulck%40cs.kuleuven.be
2023-12-08selftests/sgx: Fix linker script assertsJo Van Bulck1-5/+1
DEFINED only considers symbols, not section names. Hence, replace the check for .got.plt with the _GLOBAL_OFFSET_TABLE_ symbol and remove other (non-essential) asserts. Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/all/20231005153854.25566-10-jo.vanbulck%40cs.kuleuven.be
2023-12-08selftests/sgx: Handle relocations in test enclaveJo Van Bulck1-15/+35
Static-pie binaries normally include a startup routine to perform any ELF relocations from .rela.dyn. Since the enclave loading process is different and glibc is not included, do the necessary relocation for encl_op_array entries manually at runtime relative to the enclave base to ensure correct function pointers. When keeping encl_op_array as a local variable on the stack, gcc without optimizations generates code that explicitly gets the right function addresses and stores them to create the array on the stack: encl_body: /* snipped */ lea do_encl_op_put_to_buf(%rip), %rax mov %rax, -0x50(%rbp) lea do_encl_op_get_from_buf(%rip), %rax mov %rax,-0x48(%rbp) lea do_encl_op_put_to_addr(%rip), %rax /* snipped */ However, gcc -Os or clang generate more efficient code that initializes encl_op_array by copying a "prepared copy" containing the absolute addresses of the functions (i.e., relative to the image base starting from 0) generated by the compiler/linker: encl_body: /* snipped */ lea prepared_copy(%rip), %rsi lea -0x48(%rsp), %rdi mov $0x10,%ecx rep movsl %ds:(%rsi),%es:(%rdi) /* snipped */ When building the enclave with -static-pie, the compiler/linker includes relocation entries for the function symbols in the "prepared copy": Relocation section '.rela.dyn' at offset 0x4000 contains 12 entries: Offset Info Type Symbol /* snipped; "prepared_copy" starts at 0x6000 */ 000000006000 000000000008 R_X86_64_RELATIVE <do_encl_emodpe> 000000006008 000000000008 R_X86_64_RELATIVE <do_encl_eaccept> 000000006010 000000000008 R_X86_64_RELATIVE <do_encl_op_put_to_buf> 000000006018 000000000008 R_X86_64_RELATIVE <do_encl_op_get_from_buf> 000000006020 000000000008 R_X86_64_RELATIVE <do_encl_op_put_to_addr> 000000006028 000000000008 R_X86_64_RELATIVE <do_encl_op_get_from_addr> 000000006030 000000000008 R_X86_64_RELATIVE <do_encl_op_nop> 000000006038 000000000008 R_X86_64_RELATIVE <do_encl_init_tcs_page> Static-pie binaries normally include a glibc "_dl_relocate_static_pie" routine that will perform these relocations as part of the startup. However, since the enclave loading process is different and glibc is not included, we cannot rely on these relocations to be performed. Without relocations, the code would erroneously jump to the _absolute_ function address loaded from the local copy. Thus, declare "encl_op_array" as global and manually relocate the loaded function-pointer entries relative to the enclave base at runtime. This generates the following code: encl_body: /* snipped */ lea encl_op_array(%rip), %rcx lea __encl_base(%rip), %rax add (%rcx,%rdx,8),%rax jmp *%rax Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Kai Huang <kai.huang@intel.com> Link: https://lore.kernel.org/all/150d8ca8-2c66-60d1-f9fc-8e6279824e94@cs.kuleuven.be/ Link: https://lore.kernel.org/all/5c22de5a-4b3b-1f38-9771-409b4ec7f96d@cs.kuleuven.be/#r Link: https://lore.kernel.org/all/20231005153854.25566-9-jo.vanbulck%40cs.kuleuven.be
2023-12-08selftests/sgx: Produce static-pie executable for test enclaveJo Van Bulck3-4/+8
The current combination of -static and -fPIC creates a static executable with position-dependent addresses for global variables. Use -static-pie and -fPIE to create a proper static position independent executable that can be loaded at any address without a dynamic linker. When building the original "lea (encl_stack)(%rbx), %rax" assembly code with -static-pie -fPIE, the linker complains about a relocation it cannot resolve: /usr/local/bin/ld: /tmp/cchIWyfG.o: relocation R_X86_64_32S against `.data' can not be used when making a PIE object; recompile with -fPIE collect2: error: ld returned 1 exit status Thus, since only RIP-relative addressing is legit for local symbols, use "encl_stack(%rip)" and declare an explicit "__encl_base" symbol at the start of the linker script to be able to calculate the stack address relative to the current TCS in the enclave assembly entry code. Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Kai Huang <kai.huang@intel.com> Link: https://lore.kernel.org/all/f9c24d89-ed72-7d9e-c650-050d722c6b04@cs.kuleuven.be/ Link: https://lore.kernel.org/all/20231005153854.25566-8-jo.vanbulck%40cs.kuleuven.be
2023-12-08selftests/sgx: Remove redundant enclave base address save/restoreJo Van Bulck1-3/+0
Remove redundant push/pop pair that stores and restores the enclave base address in the test enclave, as it is never used after the pop and can anyway be easily retrieved via the __encl_base symbol. Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Kai Huang <kai.huang@intel.com> Link: https://lore.kernel.org/all/20231005153854.25566-7-jo.vanbulck%40cs.kuleuven.be
2023-12-08selftests/sgx: Specify freestanding environment for enclave compilationJo Van Bulck1-1/+1
Use -ffreestanding to assert the enclave compilation targets a freestanding environment (i.e., without "main" or standard libraries). This fixes clang reporting "undefined reference to `memset'" after erroneously optimizing away the provided memset/memcpy implementations. Still need to instruct the linker from using standard system startup functions, but drop -nostartfiles as it is implied by -nostdlib. Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Kai Huang <kai.huang@intel.com> Link: https://lore.kernel.org/all/20231005153854.25566-6-jo.vanbulck%40cs.kuleuven.be
2023-12-08selftests/sgx: Separate linker optionsJo Van Bulck1-5/+7
Fixes "'linker' input unused [-Wunused-command-line-argument]" errors when compiling with clang. Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/all/20231005153854.25566-5-jo.vanbulck%40cs.kuleuven.be
2023-12-08selftests/sgx: Include memory clobber for inline asm in test enclaveJo Van Bulck1-3/+5
Add the "memory" clobber to the EMODPE and EACCEPT asm blocks to tell the compiler the assembly code accesses to the secinfo struct. This ensures the compiler treats the asm block as a memory barrier and the write to secinfo will be visible to ENCLU. Fixes: 20404a808593 ("selftests/sgx: Add test for EPCM permission changes") Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/all/20231005153854.25566-4-jo.vanbulck%40cs.kuleuven.be
2023-12-08selftests/sgx: Fix uninitialized pointer dereferences in encl_get_entryJo Van Bulck1-3/+6
Ensure sym_tab and sym_names are zero-initialized and add an early-out condition in the unlikely (erroneous) case that the enclave ELF file would not contain a symbol table. This addresses -Werror=maybe-uninitialized compiler warnings for gcc -O2. Fixes: 33c5aac3bf32 ("selftests/sgx: Test complete changing of page type flow") Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/all/20231005153854.25566-3-jo.vanbulck%40cs.kuleuven.be
2023-12-08selftests/sgx: Fix uninitialized pointer dereference in error pathJo Van Bulck1-2/+3
Ensure ctx is zero-initialized, such that the encl_measure function will not call EVP_MD_CTX_destroy with an uninitialized ctx pointer in case of an early error during key generation. Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX") Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Kai Huang <kai.huang@intel.com> Link: https://lore.kernel.org/all/20231005153854.25566-2-jo.vanbulck%40cs.kuleuven.be
2023-12-01Merge tag 'perf-tools-fixes-for-v6.7-1-2023-11-29' of ↵Linus Torvalds28-39/+226
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Namhyung Kim: "Assorted build fixes including: - fix compile errors in printf() with u64 on 32-bit systesm - sync kernel headers to the tool copies - update arm64 sysreg generation for tarballs - disable compile warnings on __packed attribute" * tag 'perf-tools-fixes-for-v6.7-1-2023-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: tools: Disable __packed attribute compiler warning due to -Werror=attributes perf build: Ensure sysreg-defs Makefile respects output dir tools perf: Add arm64 sysreg files to MANIFEST tools/perf: Update tools's copy of mips syscall table tools/perf: Update tools's copy of s390 syscall table tools/perf: Update tools's copy of powerpc syscall table tools/perf: Update tools's copy of x86 syscall table tools headers: Update tools's copy of s390/asm headers tools headers: Update tools's copy of arm64/asm headers tools headers: Update tools's copy of x86/asm headers tools headers: Update tools's copy of socket.h header tools headers UAPI: Update tools's copy of unistd.h header tools headers UAPI: Update tools's copy of vhost.h header tools headers UAPI: Update tools's copy of mount.h header tools headers UAPI: Update tools's copy of kvm.h header tools headers UAPI: Update tools's copy of fscrypt.h header tools headers UAPI: Update tools's copy of drm headers perf lock contention: Fix a build error on 32-bit perf kwork: Fix a build error on 32-bit
2023-12-01Merge tag 'net-6.7-rc4' of ↵Linus Torvalds12-84/+160
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf and wifi. Current release - regressions: - neighbour: fix __randomize_layout crash in struct neighbour - r8169: fix deadlock on RTL8125 in jumbo mtu mode Previous releases - regressions: - wifi: - mac80211: fix warning at station removal time - cfg80211: fix CQM for non-range use - tools: ynl-gen: fix unexpected response handling - octeontx2-af: fix possible buffer overflow - dpaa2: recycle the RX buffer only after all processing done - rswitch: fix missing dev_kfree_skb_any() in error path Previous releases - always broken: - ipv4: fix uaf issue when receiving igmp query packet - wifi: mac80211: fix debugfs deadlock at device removal time - bpf: - sockmap: af_unix stream sockets need to hold ref for pair sock - netdevsim: don't accept device bound programs - selftests: fix a char signedness issue - dsa: mv88e6xxx: fix marvell 6350 probe crash - octeontx2-pf: restore TC ingress police rules when interface is up - wangxun: fix memory leak on msix entry - ravb: keep reverse order of operations in ravb_remove()" * tag 'net-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits) net: ravb: Keep reverse order of operations in ravb_remove() net: ravb: Stop DMA in case of failures on ravb_open() net: ravb: Start TX queues after HW initialization succeeded net: ravb: Make write access to CXR35 first before accessing other EMAC registers net: ravb: Use pm_runtime_resume_and_get() net: ravb: Check return value of reset_control_deassert() net: libwx: fix memory leak on msix entry ice: Fix VF Reset paths when interface in a failed over aggregate bpf, sockmap: Add af_unix test with both sockets in map bpf, sockmap: af_unix stream sockets need to hold ref for pair sock tools: ynl-gen: always construct struct ynl_req_state ethtool: don't propagate EOPNOTSUPP from dumps ravb: Fix races between ravb_tx_timeout_work() and net related ops r8169: prevent potential deadlock in rtl8169_close r8169: fix deadlock on RTL8125 in jumbo mtu mode neighbour: Fix __randomize_layout crash in struct neighbour octeontx2-pf: Restore TC ingress police rules when interface is up octeontx2-pf: Fix adding mbox work queue entry when num_vfs > 64 net: stmmac: xgmac: Disable FPE MMC interrupts octeontx2-af: Fix possible buffer overflow ...
2023-11-30Merge tag 'for-netdev' of ↵Jakub Kicinski2-11/+47
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-11-30 We've added 5 non-merge commits during the last 7 day(s) which contain a total of 10 files changed, 66 insertions(+), 15 deletions(-). The main changes are: 1) Fix AF_UNIX splat from use after free in BPF sockmap, from John Fastabend. 2) Fix a syzkaller splat in netdevsim by properly handling offloaded programs (and not device-bound ones), from Stanislav Fomichev. 3) Fix bpf_mem_cache_alloc_flags() to initialize the allocation hint, from Hou Tao. 4) Fix netkit by rejecting IFLA_NETKIT_PEER_INFO in changelink, from Daniel Borkmann. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, sockmap: Add af_unix test with both sockets in map bpf, sockmap: af_unix stream sockets need to hold ref for pair sock netkit: Reject IFLA_NETKIT_PEER_INFO in netkit_change_link bpf: Add missed allocation hint for bpf_mem_cache_alloc_flags() netdevsim: Don't accept device bound programs ==================== Link: https://lore.kernel.org/r/20231129234916.16128-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-30bpf, sockmap: Add af_unix test with both sockets in mapJohn Fastabend2-11/+47
This adds a test where both pairs of a af_unix paired socket are put into a BPF map. This ensures that when we tear down the af_unix pair we don't have any issues on sockmap side with ordering and reference counting. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20231129012557.95371-3-john.fastabend@gmail.com
2023-11-29tools: ynl-gen: always construct struct ynl_req_stateJakub Kicinski5-55/+102
struct ynl_req_state carries reply-related info from generated code into generic YNL code. While we don't need reply info to execute a request without a reply, we still need to pass in the struct, because it's also where we get the pointer to struct ynl_sock from. Passing NULL results in crashes if kernel returns an error or an unexpected reply. Fixes: dc0956c98f11 ("tools: ynl-gen: move the response reading logic into YNL") Link: https://lore.kernel.org/r/20231126225858.2144136-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-28selftests/net: mptcp: fix uninitialized variable warningsWillem de Bruijn2-14/+8
Same init_rng() in both tests. The function reads /dev/urandom to initialize srand(). In case of failure, it falls back onto the entropy in the uninitialized variable. Not sure if this is on purpose. But failure reading urandom should be rare, so just fail hard. While at it, convert to getrandom(). Which man 4 random suggests is simpler and more robust. mptcp_inq.c:525:6: mptcp_connect.c:1131:6: error: variable 'foo' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp") Fixes: b51880568f20 ("selftests: mptcp: add inq test case") Cc: Florian Westphal <fw@strlen.de> Signed-off-by: Willem de Bruijn <willemb@google.com> ---- When input is randomized because this is expected to meaningfully explore edge cases, should we also add 1. logging the random seed to stdout and 2. adding a command line argument to replay from a specific seed I can do this in net-next, if authors find it useful in this case. Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Link: https://lore.kernel.org/r/20231124171645.1011043-5-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-28selftests/net: unix: fix unused variable compiler warningWillem de Bruijn1-1/+0
Remove an unused variable. diag_uid.c:151:24: error: unused variable 'udr' [-Werror,-Wunused-variable] Fixes: ac011361bd4f ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.") Signed-off-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20231124171645.1011043-4-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-28selftests/net: fix a char signedness issueWillem de Bruijn1-1/+1
Signedness of char is signed on x86_64, but unsigned on arm64. Fix the warning building cmsg_sender.c on signed platforms or forced with -fsigned-char: msg_sender.c:455:12: error: implicit conversion from 'int' to 'char' changes value from 128 to -128 [-Werror,-Wconstant-conversion] buf[0] = ICMPV6_ECHO_REQUEST; constant ICMPV6_ECHO_REQUEST is 128. Link: https://lwn.net/Articles/911914 Fixes: de17e305a810 ("selftests: net: cmsg_sender: support icmp and raw sockets") Signed-off-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20231124171645.1011043-3-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-28selftests/net: ipsec: fix constant out of rangeWillem de Bruijn1-2/+2
Fix a small compiler warning. nr_process must be a signed long: it is assigned a signed long by strtol() and is compared against LONG_MIN and LONG_MAX. ipsec.c:2280:65: error: result of comparison of constant -9223372036854775808 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare] if ((errno == ERANGE && (nr_process == LONG_MAX || nr_process == LONG_MIN)) Fixes: bc2652b7ae1e ("selftest/net/xfrm: Add test for ipsec tunnel") Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://lore.kernel.org/r/20231124171645.1011043-2-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-26Merge tag 'parisc-for-6.7-rc3' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: "This patchset fixes and enforces correct section alignments for the ex_table, altinstructions, parisc_unwind, jump_table and bug_table which are created by inline assembly. Due to not being correctly aligned at link & load time they can trigger unnecessarily the kernel unaligned exception handler at runtime. While at it, I switched the bug table to use relative addresses which reduces the size of the table by half on 64-bit. We still had the ENOSYM and EREMOTERELEASE errno symbols as left-overs from HP-UX, which now trigger build-issues with glibc. We can simply remove them. Most of the patches are tagged for stable kernel series. Summary: - Drop HP-UX ENOSYM and EREMOTERELEASE return codes to avoid glibc build issues - Fix section alignments for ex_table, altinstructions, parisc unwind table, jump_table and bug_table - Reduce size of bug_table on 64-bit kernel by using relative pointers" * tag 'parisc-for-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Reduce size of the bug_table on 64-bit kernel by half parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes parisc: Use natural CPU alignment for bug_table parisc: Ensure 32-bit alignment on parisc unwind section parisc: Mark lock_aligned variables 16-byte aligned on SMP parisc: Mark jump_table naturally aligned parisc: Mark altinstructions read-only and 32-bit aligned parisc: Mark ex_table entries 32-bit aligned in uaccess.h parisc: Mark ex_table entries 32-bit aligned in assembly.h
2023-11-25Merge tag 'arm64-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Fix "rodata=on" not disabling "rodata=full" on arm64 - Add arm64 make dependency between vmlinuz.efi and Image, leading to occasional build failures previously (with parallel building) - Add newline to the output formatting of the za-fork kselftest * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: add dependency between vmlinuz.efi and Image kselftest/arm64: Fix output formatting for za-fork arm64: mm: Fix "rodata=on" when CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
2023-11-25parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codesHelge Deller1-2/+0
Those return codes are only defined for the parisc architecture and are leftovers from when we wanted to be HP-UX compatible. They are not returned by any Linux kernel syscall but do trigger problems with the glibc strerrorname_np() and strerror() functions as reported in glibc issue #31080. There is no need to keep them, so simply remove them. Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: Bruno Haible <bruno@clisp.org> Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=31080 Cc: stable@vger.kernel.org
2023-11-24Merge tag 'pm-6.7-rc3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix a syntax error in the sleepgraph utility which causes it to exit early on every invocation (David Woodhouse)" * tag 'pm-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: tools: Fix sleepgraph syntax error
2023-11-23Merge tag 'net-6.7-rc3' of ↵Linus Torvalds14-217/+639
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. Current release - regressions: - Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" - kselftest: rtnetlink: fix ip route command typo Current release - new code bugs: - s390/ism: make sure ism driver implies smc protocol in kconfig - two build fixes for tools/net Previous releases - regressions: - rxrpc: couple of ACK/PING/RTT handling fixes Previous releases - always broken: - bpf: verify bpf_loop() callbacks as if they are called unknown number of times - improve stability of auto-bonding with Hyper-V - account BPF-neigh-redirected traffic in interface statistics Misc: - net: fill in some more MODULE_DESCRIPTION()s" * tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits) tools: ynl: fix duplicate op name in devlink tools: ynl: fix header path for nfsd net: ipa: fix one GSI register field width tls: fix NULL deref on tls_sw_splice_eof() with empty record net: axienet: Fix check for partial TX checksum vsock/test: fix SEQPACKET message bounds test i40e: Fix adding unsupported cloud filters ice: restore timestamp configuration after device reset ice: unify logic for programming PFINT_TSYN_MSK ice: remove ptp_tx ring parameter flag amd-xgbe: propagate the correct speed and duplex status amd-xgbe: handle the corner-case during tx completion amd-xgbe: handle corner-case during sfp hotplug net: veth: fix ethtool stats reporting octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF net: usb: qmi_wwan: claim interface 4 for ZTE MF290 Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" net/smc: avoid data corruption caused by decline nfc: virtual_ncidev: Add variable to check if ndev is running dpll: Fix potential msg memleak when genlmsg_put_reply failed ...
2023-11-23tools: ynl: fix duplicate op name in devlinkJakub Kicinski2-1/+7
We don't support CRUD-inspired message types in YNL too well. One aspect that currently trips us up is the fact that single message ID can be used in multiple commands (as the response). This leads to duplicate entries in the id-to-string tables: devlink-user.c:19:34: warning: initialized field overwritten [-Woverride-init] 19 | [DEVLINK_CMD_PORT_NEW] = "port-new", | ^~~~~~~~~~ devlink-user.c:19:34: note: (near initialization for ‘devlink_op_strmap[7]’) Fixes tag points at where the code was generated, the "real" problem is that the code generator does not support CRUD. Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops") Link: https://lore.kernel.org/r/20231123030558.1611831-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23tools: ynl: fix header path for nfsdJakub Kicinski1-1/+1
The makefile dependency is trying to include the wrong header: <command-line>: fatal error: ../../../../include/uapi//linux/nfsd.h: No such file or directory The guard also looks wrong. Fixes: f14122b2c2ac ("tools: ynl: Add source files for nfsd netlink protocol") Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/20231123030624.1611925-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23vsock/test: fix SEQPACKET message bounds testArseniy Krasnov1-6/+13
Tune message length calculation to make this test work on machines where 'getpagesize()' returns >32KB. Now maximum message length is not hardcoded (on machines above it was smaller than 'getpagesize()' return value, thus we get negative value and test fails), but calculated at runtime and always bigger than 'getpagesize()' result. Reproduced on aarch64 with 64KB page size. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reported-by: Bogdan Marcynkov <bmarcynk@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23kselftest/arm64: Fix output formatting for za-forkMark Brown1-1/+1
The za-fork test does not output a newline when reporting the result of the one test it runs, causing the counts printed by kselftest to be included in the test name. Add the newline. Fixes: 266679ffd867 ("kselftest/arm64: Convert za-fork to use kselftest.h") Cc: <stable@vger.kernel.org> # 6.4.x Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231116-arm64-fix-za-fork-output-v1-1-42c03d4f5759@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-11-22tools: Disable __packed attribute compiler warning due to -Werror=attributesArnaldo Carvalho de Melo1-0/+1
Noticed on several perf tools cross build test containers: [perfbuilder@five ~]$ grep FAIL ~/dm.log/summary 19 10.18 debian:experimental-x-mips : FAIL gcc version 12.3.0 (Debian 12.3.0-6) 20 11.21 debian:experimental-x-mips64 : FAIL gcc version 12.3.0 (Debian 12.3.0-6) 21 11.30 debian:experimental-x-mipsel : FAIL gcc version 12.3.0 (Debian 12.3.0-6) 37 12.07 ubuntu:18.04-x-arm : FAIL gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 42 11.91 ubuntu:18.04-x-riscv64 : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04) 44 13.17 ubuntu:18.04-x-sh4 : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04) 45 12.09 ubuntu:18.04-x-sparc64 : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04) [perfbuilder@five ~]$ In file included from util/intel-pt-decoder/intel-pt-pkt-decoder.c:10: /tmp/perf-6.6.0-rc1/tools/include/asm-generic/unaligned.h: In function 'get_unaligned_le16': /tmp/perf-6.6.0-rc1/tools/include/asm-generic/unaligned.h:13:29: error: packed attribute causes inefficient alignment for 'x' [-Werror=attributes] 13 | const struct { type x; } __packed *__pptr = (typeof(__pptr))(ptr); \ | ^ /tmp/perf-6.6.0-rc1/tools/include/asm-generic/unaligned.h:27:28: note: in expansion of macro '__get_unaligned_t' 27 | return le16_to_cpu(__get_unaligned_t(__le16, p)); | ^~~~~~~~~~~~~~~~~ This comes from the kernel, where the -Wattributes and -Wpacked isn't used, -Wpacked is already disabled, do it for the attributes as well. Fixes: a91c987254651443 ("perf tools: Add get_unaligned_leNN()") Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/7c5b626c-1de9-4c12-a781-e44985b4a797@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-11-22perf build: Ensure sysreg-defs Makefile respects output dirOliver Upton4-13/+20
Currently the sysreg-defs are written out to the source tree unconditionally, ignoring the specified output directory. Correct the build rule to emit the header to the output directory. Opportunistically reorganize the rules to avoid interleaving with the set of beauty make rules. Reported-by: Ian Rogers <irogers@google.com> Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20231121192956.919380-3-oliver.upton@linux.dev Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-11-22tools perf: Add arm64 sysreg files to MANIFESTOliver Upton1-0/+2
Ian pointed out that source tarballs are incomplete as of commit e2bdd172e665 ("perf build: Generate arm64's sysreg-defs.h and add to include path"), since the source files needed from the kernel tree do not appear in the manifest. Add them. Reported-by: Ian Rogers <irogers@google.com> Fixes: e2bdd172e665 ("perf build: Generate arm64's sysreg-defs.h and add to include path") Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20231121192956.919380-2-oliver.upton@linux.dev Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-11-22tools/perf: Update tools's copy of mips syscall tableNamhyung Kim1-0/+4
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-14-namhyung@kernel.org
2023-11-22tools/perf: Update tools's copy of s390 syscall tableNamhyung Kim1-0/+4
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-13-namhyung@kernel.org
2023-11-22tools/perf: Update tools's copy of powerpc syscall tableNamhyung Kim1-0/+4
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-12-namhyung@kernel.org
2023-11-22tools/perf: Update tools's copy of x86 syscall tableNamhyung Kim1-0/+3
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-11-namhyung@kernel.org
2023-11-22tools headers: Update tools's copy of s390/asm headersNamhyung Kim1-0/+16
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-10-namhyung@kernel.org
2023-11-22tools headers: Update tools's copy of arm64/asm headersNamhyung Kim3-5/+42
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-9-namhyung@kernel.org
2023-11-22tools headers: Update tools's copy of x86/asm headersNamhyung Kim4-7/+60
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-8-namhyung@kernel.org
2023-11-22tools headers: Update tools's copy of socket.h headerNamhyung Kim1-0/+1
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: netdev@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-7-namhyung@kernel.org
2023-11-22tools headers UAPI: Update tools's copy of unistd.h headerNamhyung Kim1-3/+9
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-arch@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-6-namhyung@kernel.org
2023-11-22tools headers UAPI: Update tools's copy of vhost.h headerNamhyung Kim1-0/+8
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: kvm@vger.kernel.org Cc: virtualization@lists.linux.dev Cc: netdev@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-5-namhyung@kernel.org
2023-11-22tools headers UAPI: Update tools's copy of mount.h headerNamhyung Kim1-1/+2
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-4-namhyung@kernel.org
2023-11-22tools headers UAPI: Update tools's copy of kvm.h headerNamhyung Kim1-3/+21
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-3-namhyung@kernel.org
2023-11-22tools headers UAPI: Update tools's copy of fscrypt.h headerNamhyung Kim1-1/+2
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Eric Biggers <ebiggers@kernel.org> Cc: "Theodore Y. Ts'o" <tytso@mit.edu> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: linux-fscrypt@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-2-namhyung@kernel.org
2023-11-22tools headers UAPI: Update tools's copy of drm headersNamhyung Kim2-4/+24
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-1-namhyung@kernel.org
2023-11-22Merge tag 'hyperv-fixes-signed-20231121' of ↵Linus Torvalds2-10/+14
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - One fix for the KVP daemon (Ani Sinha) - Fix for the detection of E820_TYPE_PRAM in a Gen2 VM (Saurabh Sengar) - Micro-optimization for hv_nmi_unknown() (Uros Bizjak) * tag 'hyperv-fixes-signed-20231121' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Use atomic_try_cmpxchg() to micro-optimize hv_nmi_unknown() x86/hyperv: Fix the detection of E820_TYPE_PRAM in a Gen2 VM hv/hv_kvp_daemon: Some small fixes for handling NM keyfiles
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 13:44:30 +0300