| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Under certain conditions it was possible for verifier.c:regsafe() to
skip check_id() call. This commit adds negative test cases previously
errorneously accepted as safe.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20221209135733.28851-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The original support for bpf_user_ringbuf_drain callbacks simply
short-circuited checks for the dynptr state, allowing users to pass
PTR_TO_DYNPTR (now CONST_PTR_TO_DYNPTR) to helpers that initialize a
dynptr. This bug would have also surfaced with other dynptr helpers in
the future that changed dynptr view or modified it in some way.
Include test cases for all cases, i.e. both bpf_dynptr_from_mem and
bpf_ringbuf_reserve_dynptr, and ensure verifier rejects both of them.
Without the fix, both of these programs load and pass verification.
While at it, remove sys_nanosleep target from failure cases' SEC
definition, as there is no such tracepoint.
Acked-by: David Vernet <void@manifault.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-8-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
While check_func_arg_reg_off is the place which performs generic checks
needed by various candidates of reg->type, there is some handling for
special cases, like ARG_PTR_TO_DYNPTR, OBJ_RELEASE, and
ARG_PTR_TO_RINGBUF_MEM.
This commit aims to streamline these special cases and instead leave
other things up to argument type specific code to handle. The function
will be restrictive by default, and cover all possible cases when
OBJ_RELEASE is set, without having to update the function again (and
missing to do that being a bug).
This is done primarily for two reasons: associating back reg->type to
its argument leaves room for the list getting out of sync when a new
reg->type is supported by an arg_type.
The other case is ARG_PTR_TO_RINGBUF_MEM. The problem there is something
we already handle, whenever a release argument is expected, it should
be passed as the pointer that was received from the acquire function.
Hence zero fixed and variable offset.
There is nothing special about ARG_PTR_TO_RINGBUF_MEM, where technically
its target register type PTR_TO_MEM | MEM_RINGBUF can already be passed
with non-zero offset to other helper functions, which makes sense.
Hence, lift the arg_type_is_release check for reg->off and cover all
possible register types, instead of duplicating the same kind of check
twice for current OBJ_RELEASE arg_types (alloc_mem and ptr_to_btf_id).
For the release argument, arg_type_is_dynptr is the special case, where
we go to actual object being freed through the dynptr, so the offset of
the pointer still needs to allow fixed and variable offset and
process_dynptr_func will verify them later for the release argument case
as well.
This is not specific to ARG_PTR_TO_DYNPTR though, we will need to make
this exception for any future object on the stack that needs to be
released. In this sense, PTR_TO_STACK as a candidate for object on stack
argument is a special case for release offset checks, and they need to
be done by the helper releasing the object on stack.
Since the check has been lifted above all register type checks, remove
the duplicated check that is being done for PTR_TO_BTF_ID.
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Recently, user ringbuf support introduced a PTR_TO_DYNPTR register type
for use in callback state, because in case of user ringbuf helpers,
there is no dynptr on the stack that is passed into the callback. To
reflect such a state, a special register type was created.
However, some checks have been bypassed incorrectly during the addition
of this feature. First, for arg_type with MEM_UNINIT flag which
initialize a dynptr, they must be rejected for such register type.
Secondly, in the future, there are plans to add dynptr helpers that
operate on the dynptr itself and may change its offset and other
properties.
In all of these cases, PTR_TO_DYNPTR shouldn't be allowed to be passed
to such helpers, however the current code simply returns 0.
The rejection for helpers that release the dynptr is already handled.
For fixing this, we take a step back and rework existing code in a way
that will allow fitting in all classes of helpers and have a coherent
model for dealing with the variety of use cases in which dynptr is used.
First, for ARG_PTR_TO_DYNPTR, it can either be set alone or together
with a DYNPTR_TYPE_* constant that denotes the only type it accepts.
Next, helpers which initialize a dynptr use MEM_UNINIT to indicate this
fact. To make the distinction clear, use MEM_RDONLY flag to indicate
that the helper only operates on the memory pointed to by the dynptr,
not the dynptr itself. In C parlance, it would be equivalent to taking
the dynptr as a point to const argument.
When either of these flags are not present, the helper is allowed to
mutate both the dynptr itself and also the memory it points to.
Currently, the read only status of the memory is not tracked in the
dynptr, but it would be trivial to add this support inside dynptr state
of the register.
With these changes and renaming PTR_TO_DYNPTR to CONST_PTR_TO_DYNPTR to
better reflect its usage, it can no longer be passed to helpers that
initialize a dynptr, i.e. bpf_dynptr_from_mem, bpf_ringbuf_reserve_dynptr.
A note to reviewers is that in code that does mark_stack_slots_dynptr,
and unmark_stack_slots_dynptr, we implicitly rely on the fact that
PTR_TO_STACK reg is the only case that can reach that code path, as one
cannot pass CONST_PTR_TO_DYNPTR to helpers that don't set MEM_RDONLY. In
both cases such helpers won't be setting that flag.
The next patch will add a couple of selftest cases to make sure this
doesn't break.
Fixes: 205715673844 ("bpf: Add bpf_user_ringbuf_drain() helper")
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
ARG_PTR_TO_DYNPTR is akin to ARG_PTR_TO_TIMER, ARG_PTR_TO_KPTR, where
the underlying register type is subjected to more special checks to
determine the type of object represented by the pointer and its state
consistency.
Move dynptr checks to their own 'process_dynptr_func' function so that
is consistent and in-line with existing code. This also makes it easier
to reuse this code for kfunc handling.
Then, reuse this consolidated function in kfunc dynptr handling too.
Note that for kfuncs, the arg_type constraint of DYNPTR_TYPE_LOCAL has
been lifted.
Acked-by: David Vernet <void@manifault.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207204141.308952-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Bpftool has new extra libbpf_det_bind probing map we need to exclude.
Also skip trying to load netdevsim modules if it's already loaded (builtin).
v2:
- drop iproute2->bpftool changes (Toke)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221206232739.2504890-1-sdf@google.com
|
|
Convert big chunks of dynptr and map_kptr subtests to use generic
verification_tester. They are switched from using manually maintained
tables of test cases, specifying program name and expected error
verifier message, to btf_decl_tag-based annotations directly on
corresponding BPF programs: __failure to specify that BPF program is
expected to fail verification, and __msg() to specify expected log
message.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221207201648.2990661-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
It's become a common pattern to have a collection of small BPF programs
in one BPF object file, each representing one test case. On user-space
side of such tests we maintain a table of program names and expected
failure or success, along with optional expected verifier log message.
This works, but each set of tests reimplement this mundane code over and
over again, which is a waste of time for anyone trying to add a new set
of tests. Furthermore, it's quite error prone as it's way too easy to miss
some entries in these manually maintained test tables (as evidences by
dynptr_fail tests, in which ringbuf_release_uninit_dynptr subtest was
accidentally missed; this is fixed in next patch).
So this patch implements generic test_loader, which accepts skeleton
name and handles the rest of details: opens and loads BPF object file,
making sure each program is tested in isolation. Optionally each test
case can specify expected BPF verifier log message. In case of failure,
tester makes sure to report verifier log, but it also reports verifier
log in verbose mode unconditionally.
Now, the interesting deviation from existing custom implementations is
the use of btf_decl_tag attribute to specify expected-to-fail vs
expected-to-succeed markers and, optionally, expected log message
directly next to BPF program source code, eliminating the need to
manually create and update table of tests.
We define few macros wrapping btf_decl_tag with a convention that all
values of btf_decl_tag start with "comment:" prefix, and then utilizing
a very simple "just_some_text_tag" or "some_key_name=<value>" pattern to
define things like expected success/failure, expected verifier message,
extra verifier log level (if necessary). This approach is demonstrated
by next patch in which two existing sets of failure tests are converted.
Tester supports both expected-to-fail and expected-to-succeed programs,
though this patch set didn't convert any existing expected-to-succeed
programs yet, as existing tests couple BPF program loading with their
further execution through attach or test_prog_run. One way to allow
testing scenarios like this would be ability to specify custom callback,
executed for each successfully loaded BPF program. This is left for
follow up patches, after some more analysis of existing test cases.
This test_loader is, hopefully, a start of a test_verifier-like runner,
but integrated into test_progs infrastructure. It will allow much better
"user experience" of defining low-level verification tests that can take
advantage of all the libbpf-provided nicety features on BPF side: global
variables, declarative maps, etc. All while having a choice of defining
it in C or as BPF assembly (through __attribute__((naked)) functions and
using embedded asm), depending on what makes most sense in each
particular case. This will be explored in follow up patches as well.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221207201648.2990661-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A series of prior patches added some kfuncs that allow struct
task_struct * objects to be used as kptrs. These kfuncs leveraged the
'refcount_t rcu_users' field of the task for performing refcounting.
This field was used instead of 'refcount_t usage', as we wanted to
leverage the safety provided by RCU for ensuring a task's lifetime.
A struct task_struct is refcounted by two different refcount_t fields:
1. p->usage: The "true" refcount field which task lifetime. The
task is freed as soon as this refcount drops to 0.
2. p->rcu_users: An "RCU users" refcount field which is statically
initialized to 2, and is co-located in a union with
a struct rcu_head field (p->rcu). p->rcu_users
essentially encapsulates a single p->usage
refcount, and when p->rcu_users goes to 0, an RCU
callback is scheduled on the struct rcu_head which
decrements the p->usage refcount.
Our logic was that by using p->rcu_users, we would be able to use RCU to
safely issue refcount_inc_not_zero() a task's rcu_users field to
determine if a task could still be acquired, or was exiting.
Unfortunately, this does not work due to p->rcu_users and p->rcu sharing
a union. When p->rcu_users goes to 0, an RCU callback is scheduled to
drop a single p->usage refcount, and because the fields share a union,
the refcount immediately becomes nonzero again after the callback is
scheduled.
If we were to split the fields out of the union, this wouldn't be a
problem. Doing so should also be rather non-controversial, as there are
a number of places in struct task_struct that have padding which we
could use to avoid growing the structure by splitting up the fields.
For now, so as to fix the kfuncs to be correct, this patch instead
updates bpf_task_acquire() and bpf_task_release() to use the p->usage
field for refcounting via the get_task_struct() and put_task_struct()
functions. Because we can no longer rely on RCU, the change also guts
the bpf_task_acquire_not_zero() and bpf_task_kptr_get() functions
pending a resolution on the above problem.
In addition, the task fixes the kfunc and rcu_read_lock selftests to
expect this new behavior.
Fixes: 90660309b0c7 ("bpf: Add kfuncs for storing struct task_struct * as a kptr")
Fixes: fca1aa75518c ("bpf: Handle MEM_RCU type properly")
Reported-by: Matus Jokay <matus.jokay@stuba.sk>
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221206210538.597606-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
CONFIG_TEST_BPF can only be a module, so let's indicate it as such in
the selftests config.
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221205131618.1524337-4-daan.j.demeyer@gmail.com
|
|
"=n" is not valid kconfig syntax. Use "is not set" instead to indicate
the option should be disabled.
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221205131618.1524337-3-daan.j.demeyer@gmail.com
|
|
When installing the selftests using
"make -C tools/testing/selftests install", we need to make sure
all the required files to run the selftests are installed. Let's
make sure this is the case.
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221205131618.1524337-2-daan.j.demeyer@gmail.com
|
|
Parse USDT arguments like "8@(%rsp)" on x86. These are emmited by
SystemTap. The argument syntax is similar to the existing "memory
dereference case" but the offset left out as it's zero (i.e. read
the value from the address in the register). We treat it the same
as the the "memory dereference case", but set the offset to 0.
I've tested that this fixes the "unrecognized arg #N spec: 8@(%rsp).."
error I've run into when attaching to a probe with such an argument.
Attaching and reading the correct argument values works.
Something similar might be needed for the other supported
architectures.
[0] Closes: https://github.com/libbpf/libbpf/issues/559
Signed-off-by: Timo Hunziker <timo.hunziker@gmx.ch>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221203123746.2160-1-timo.hunziker@eclipso.ch
|
|
It is useful to use vmlinux.h in the xfrm_info test like other kfunc
tests do. In particular, it is common for kfunc bpf prog that requires
to use other core kernel structures in vmlinux.h
Although vmlinux.h is preferred, it needs a ___local flavor of
struct bpf_xfrm_info in order to build the bpf selftests
when CONFIG_XFRM_INTERFACE=[m|n].
Cc: Eyal Birger <eyal.birger@gmail.com>
Fixes: 90a3a05eb33f ("selftests/bpf: add xfrm_info tests")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20221206193554.1059757-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
strdup() allocates memory for path. We need to release the memory in the
following error path. Add free() to avoid memory leak.
Fixes: 8f184732b60b ("bpftool: Switch to libbpf's hashmap for pinned paths of BPF objects")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221206071906.806384-1-linmq006@gmail.com
|
|
Test the xfrm_info kfunc helpers.
The test setup creates three name spaces - NS0, NS1, NS2.
XFRM tunnels are setup between NS0 and the two other NSs.
The kfunc helpers are used to steer traffic from NS0 to the other
NSs based on a userspace populated bpf global variable and validate
that the return traffic had arrived from the desired NS.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Link: https://lore.kernel.org/r/20221203084659.1837829-5-eyal.birger@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Needed for XFRM metadata tests.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Link: https://lore.kernel.org/r/20221203084659.1837829-4-eyal.birger@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Both tolower and toupper are built in c functions, we should not
redefine them as this can result in a build error.
Fixes the following errors:
progs/bpf_iter_ksym.c:10:20: error: conflicting types for built-in function 'tolower'; expected 'int(int)' [-Werror=builtin-declaration-mismatch]
10 | static inline char tolower(char c)
| ^~~~~~~
progs/bpf_iter_ksym.c:5:1: note: 'tolower' is declared in header '<ctype.h>'
4 | #include <bpf/bpf_helpers.h>
+++ |+#include <ctype.h>
5 |
progs/bpf_iter_ksym.c:17:20: error: conflicting types for built-in function 'toupper'; expected 'int(int)' [-Werror=builtin-declaration-mismatch]
17 | static inline char toupper(char c)
| ^~~~~~~
progs/bpf_iter_ksym.c:17:20: note: 'toupper' is declared in header '<ctype.h>'
See background on this sort of issue:
https://stackoverflow.com/a/20582607
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=12213
(C99, 7.1.3p1) "All identifiers with external linkage in any of the
following subclauses (including the future library directions) are
always reserved for use as identifiers with external linkage."
This is documented behavior in GCC:
https://gcc.gnu.org/onlinedocs/gcc/Other-Builtins.html#index-std-2
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221203010847.2191265-1-james.hilliard1@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add three tests for cgrp local storage support for sleepable progs.
Two tests can load and run properly, one for cgroup_iter, another
for passing current->cgroups->dfl_cgrp to bpf_cgrp_storage_get()
helper. One test has bpf_rcu_read_lock() and failed to load.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221201050449.2785613-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Martin mentioned that the verifier cannot assume arguments from
LSM hook sk_alloc_security being trusted since after the hook
is called, the sk ref_count is set to 1. This will overwrite
the ref_count changed by the bpf program and may cause ref_count
underflow later on.
I then further checked some other hooks. For example,
for bpf_lsm_file_alloc() hook in fs/file_table.c,
f->f_cred = get_cred(cred);
error = security_file_alloc(f);
if (unlikely(error)) {
file_free_rcu(&f->f_rcuhead);
return ERR_PTR(error);
}
atomic_long_set(&f->f_count, 1);
The input parameter 'f' to security_file_alloc() cannot be trusted
as well.
Specifically, I investiaged bpf_map/bpf_prog/file/sk/task alloc/free
lsm hooks. Except bpf_map_alloc and task_alloc, arguments for all other
hooks should not be considered as trusted. This may not be a complete
list, but it covers common usage for sk and task.
Fixes: 3f00c5239344 ("bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs")
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221203204954.2043348-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add MEM_RCU pointer null checking for related tests. Also
modified task_acquire test so it takes a rcu ptr 'ptr' where
'ptr = rcu_ptr->rcu_field'.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221203184607.478314-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Current libbpf Makefile does not contain the help command, which
is inconvenient to use. Similar to the Makefile help command of the
perf, a help command is provided to list the commands supported by
libbpf make and the functions of the commands.
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221202081738.128513-1-liuxin350@huawei.com
|
|
The bpf_legacy.h header uses llvm specific load functions, add
GCC compatible variants as well to fix tests using these functions
under GCC.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221201190939.3230513-1-james.hilliard1@gmail.com
|
|
Modify list_push_pop_multiple to alloc and insert nodes 2-at-a-time.
Without the previous patch's fix, this block of code:
bpf_spin_lock(lock);
bpf_list_push_front(head, &f[i]->node);
bpf_list_push_front(head, &f[i + 1]->node);
bpf_spin_unlock(lock);
would fail check_reference_leak check as release_on_unlock logic would miss
a ref that should've been released.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221201183406.1203621-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, the ingress redirect is not covered in "txmsg test apply".
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1669718441-2654-5-git-send-email-yangpc@wangsu.com
|
|
The networking programs typically don't require CAP_PERFMON, but through kfuncs
like bpf_cast_to_kern_ctx() they can access memory through PTR_TO_BTF_ID. In
such case enforce CAP_PERFMON.
Also make sure that only GPL programs can access kernel data structures.
All kfuncs require GPL already.
Also remove allow_ptr_to_map_access. It's the same as allow_ptr_leaks and
different name for the same check only causes confusion.
Fixes: fd264ca02094 ("bpf: Add a kfunc to type cast from bpf uapi ctx to kernel ctx")
Fixes: 50c6b8a9aea2 ("selftests/bpf: Add a test for btf_type_tag "percpu"")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221125220617.26846-1-alexei.starovoitov@gmail.com
|
|
BPF CI fails for arm64 and s390x each with the following result:
[...]
All error logs:
serial_test_kprobe_multi_bench_attach:PASS:get_syms 0 nsec
serial_test_kprobe_multi_bench_attach:PASS:kprobe_multi_empty__open_and_load 0 nsec
libbpf: prog 'test_kprobe_empty': failed to attach: Operation not supported
serial_test_kprobe_multi_bench_attach:FAIL:bpf_program__attach_kprobe_multi_opts unexpected error: -95
#92 kprobe_multi_bench_attach:FAIL
[...]
Add the test to the deny list.
Fixes: 5b6c7e5c4434 ("selftests/bpf: Add attach bench test")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Just a simple test to make sure we don't introduce unwanted compiler
warnings and API still supports passing enums as input argument.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221130200013.2997831-2-andrii@kernel.org
|
|
C++ enum forward declarations are fundamentally not compatible with pure
C enum definitions, and so libbpf's use of `enum bpf_stats_type;`
forward declaration in libbpf/bpf.h public API header is causing C++
compilation issues.
More details can be found in [0], but it comes down to C++ supporting
enum forward declaration only with explicitly specified backing type:
enum bpf_stats_type: int;
In C (and I believe it's a GCC extension also), such forward declaration
is simply:
enum bpf_stats_type;
Further, in Linux UAPI this enum is defined in pure C way:
enum bpf_stats_type { BPF_STATS_RUN_TIME = 0; }
And even though in both cases backing type is int, which can be
confirmed by looking at DWARF information, for C++ compiler actual enum
definition and forward declaration are incompatible.
To eliminate this problem, for C++ mode define input argument as int,
which makes enum unnecessary in libbpf public header. This solves the
issue and as demonstrated by next patch doesn't cause any unwanted
compiler warnings, at least with default warnings setting.
[0] https://stackoverflow.com/questions/42766839/c11-enum-forward-causes-underlying-type-mismatch
[1] Closes: https://github.com/libbpf/libbpf/issues/249
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221130200013.2997831-1-andrii@kernel.org
|
|
btf_skc_cls_ingress
This patch removes the need to pin prog when attaching to tc ingress
in the btf_skc_cls_ingress test. Instead, directly use the
bpf_tc_hook_create() and bpf_tc_attach(). The qdisc clsact
will go away together with the netns, so no need to
bpf_tc_hook_destroy().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-8-martin.lau@linux.dev
|
|
After removing the mount/umount dance from {open,close}_netns()
in the pervious patch, "serial_" can be removed from
the tests using {open,close}_netns().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-7-martin.lau@linux.dev
|
|
The previous patches have removed the need to do the mount and umount
dance when switching netns. In particular:
* Avoid remounting /sys/fs/bpf to have a clean start
* Avoid remounting /sys to get a ifindex of a particular netns
This patch can finally remove the mount and umount dance in
{open,close}_netns which is unnecessarily complicated and
error-prone.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-6-martin.lau@linux.dev
|
|
This patch removes the need to pin prog in the remaining tests in
tc_redirect.c by directly using the bpf_tc_hook_create() and
bpf_tc_attach(). The clsact qdisc will go away together with
the test netns, so no need to do bpf_tc_hook_destroy().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-5-martin.lau@linux.dev
|
|
This patch removes the need to pin prog in the tc_redirect_peer_l3
test by directly using the bpf_tc_hook_create() and bpf_tc_attach().
The clsact qdisc will go away together with the test netns, so
no need to do bpf_tc_hook_destroy().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-4-martin.lau@linux.dev
|
|
This patch removes the need to pin prog in the tc_redirect_dtime
test by directly using the bpf_tc_hook_create() and bpf_tc_attach().
The clsact qdisc will go away together with the test netns, so
no need to do bpf_tc_hook_destroy().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-3-martin.lau@linux.dev
|
|
/sys/net/class/*/ifindex
When switching netns, the setns_by_fd() is doing dances in mount/umounting
the /sys directories. One reason is the tc_redirect.c test is depending
on the /sys/net/class/*/ifindex instead of using the if_nametoindex().
if_nametoindex() uses ioctl() to get the ifindex.
This patch is to move all /sys/net/class/*/ifindex usages to
if_nametoindex(). The current code checks ifindex >= 0 which is
incorrect. ifindex > 0 should be checked instead. This patch also
stores ifindex_veth_src and ifindex_veth_dst since the latter patch
will need them.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-2-martin.lau@linux.dev
|
|
Test NIC hardware checksum offload:
- Rx + Tx
- IPv4 + IPv6
- TCP + UDP
Optional features:
- zero checksum 0xFFFF
- checksum disable 0x0000
- transport encap headers
- randomization
See file header for detailed comments.
Expected results differ depending on NIC features:
- CHECKSUM_UNNECESSARY vs CHECKSUM_COMPLETE
- NETIF_F_HW_CSUM (csum_start/csum_off) vs NETIF_F_IP(V6)_CSUM
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20221128140210.553391-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch first adds TFO support in mptcp_connect.c.
This can be enabled via a new option: -o MPTFO.
Once enabled, the TCP_FASTOPEN socket option is enabled for the server
side and a sendto() with MSG_FASTOPEN is used instead of a connect() for
the client side.
Note that the first SYN has a limit of bytes it can carry. In other
words, it is allowed to send less data than the provided one. We then
need to track more status info to properly allow the next sendmsg()
starting from the next part of the data to send the rest.
Also in TFO scenarios, we need to completely spool the partially xmitted
buffer -- and account for that -- before starting sendfile/mmap xmit,
otherwise the relevant tests will fail.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tools/lib/bpf/ringbuf.c
927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap")
b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c")
https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and wifi.
Current release - new code bugs:
- eth: mlx5e:
- use kvfree() in mlx5e_accel_fs_tcp_create()
- MACsec, fix RX data path 16 RX security channel limit
- MACsec, fix memory leak when MACsec device is deleted
- MACsec, fix update Rx secure channel active field
- MACsec, fix add Rx security association (SA) rule memory leak
Previous releases - regressions:
- wifi: cfg80211: don't allow multi-BSSID in S1G
- stmmac: set MAC's flow control register to reflect current settings
- eth: mlx5:
- E-switch, fix duplicate lag creation
- fix use-after-free when reverting termination table
Previous releases - always broken:
- ipv4: fix route deletion when nexthop info is not specified
- bpf: fix a local storage BPF map bug where the value's spin lock
field can get initialized incorrectly
- tipc: re-fetch skb cb after tipc_msg_validate
- wifi: wilc1000: fix Information Element parsing
- packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
- sctp: fix memory leak in sctp_stream_outq_migrate()
- can: can327: fix potential skb leak when netdev is down
- can: add number of missing netdev freeing on error paths
- aquantia: do not purge addresses when setting the number of rings
- wwan: iosm:
- fix incorrect skb length leading to truncated packet
- fix crash in peek throughput test due to skb UAF"
* tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed
MAINTAINERS: Update maintainer list for chelsio drivers
ionic: update MAINTAINERS entry
sctp: fix memory leak in sctp_stream_outq_migrate()
packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
net/mlx5: Lag, Fix for loop when checking lag
Revert "net/mlx5e: MACsec, remove replay window size limitation in offload path"
net: marvell: prestera: Fix a NULL vs IS_ERR() check in some functions
net: tun: Fix use-after-free in tun_detach()
net: mdiobus: fix unbalanced node reference count
net: hsr: Fix potential use-after-free
tipc: re-fetch skb cb after tipc_msg_validate
mptcp: fix sleep in atomic at close time
mptcp: don't orphan ssk in mptcp_close()
dsa: lan9303: Correct stat name
ipv4: Fix route deletion when nexthop info is not specified
net: wwan: iosm: fix incorrect skb length
net: wwan: iosm: fix crash in peek throughput test
net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type
net: wwan: iosm: fix kernel test robot reported error
...
|
|
====================
bpf-next 2022-11-25
We've added 101 non-merge commits during the last 11 day(s) which contain
a total of 109 files changed, 8827 insertions(+), 1129 deletions(-).
The main changes are:
1) Support for user defined BPF objects: the use case is to allocate own
objects, build own object hierarchies and use the building blocks to
build own data structures flexibly, for example, linked lists in BPF,
from Kumar Kartikeya Dwivedi.
2) Add bpf_rcu_read_{,un}lock() support for sleepable programs,
from Yonghong Song.
3) Add support storing struct task_struct objects as kptrs in maps,
from David Vernet.
4) Batch of BPF map documentation improvements, from Maryam Tahhan
and Donald Hunter.
5) Improve BPF verifier to propagate nullness information for branches
of register to register comparisons, from Eduard Zingerman.
6) Fix cgroup BPF iter infra to hold reference on the start cgroup,
from Hou Tao.
7) Fix BPF verifier to not mark fentry/fexit program arguments as trusted
given it is not the case for them, from Alexei Starovoitov.
8) Improve BPF verifier's realloc handling to better play along with dynamic
runtime analysis tools like KASAN and friends, from Kees Cook.
9) Remove legacy libbpf mode support from bpftool,
from Sahid Orentino Ferdjaoui.
10) Rework zero-len skb redirection checks to avoid potentially breaking
existing BPF test infra users, from Stanislav Fomichev.
11) Two small refactorings which are independent and have been split out
of the XDP queueing RFC series, from Toke Høiland-Jørgensen.
12) Fix a memory leak in LSM cgroup BPF selftest, from Wang Yufen.
13) Documentation on how to run BPF CI without patch submission,
from Daniel Müller.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20221125012450.441-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
bpf 2022-11-25
We've added 10 non-merge commits during the last 8 day(s) which contain
a total of 7 files changed, 48 insertions(+), 30 deletions(-).
The main changes are:
1) Several libbpf ringbuf fixes related to probing for its availability,
size overflows when mmaping a 2G ringbuf and rejection of invalid
reservationsizes, from Hou Tao.
2) Fix a buggy return pointer in libbpf for attach_raw_tp function,
from Jiri Olsa.
3) Fix a local storage BPF map bug where the value's spin lock field
can get initialized incorrectly, from Xu Kuohai.
4) Two follow-up fixes in kprobe_multi BPF selftests for BPF CI,
from Jiri Olsa.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Make test_bench_attach serial
selftests/bpf: Filter out default_idle from kprobe_multi bench
bpf: Set and check spin lock value in sk_storage_map_test
bpf: Do not copy spin lock field from user in bpf_selem_alloc
libbpf: Check the validity of size in user_ring_buffer__reserve()
libbpf: Handle size overflow for user ringbuf mmap
libbpf: Handle size overflow for ringbuf mmap
libbpf: Use page size as max_entries when probing ring buffer map
bpf, perf: Use subprog name when reporting subprog ksymbol
libbpf: Use correct return pointer in attach_raw_tp
====================
Link: https://lore.kernel.org/r/20221125001034.29473-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the kernel receives a route deletion request from user space it
tries to delete a route that matches the route attributes specified in
the request.
If only prefix information is specified in the request, the kernel
should delete the first matching FIB alias regardless of its associated
FIB info. However, an error is currently returned when the FIB info is
backed by a nexthop object:
# ip nexthop add id 1 via 192.0.2.2 dev dummy10
# ip route add 198.51.100.0/24 nhid 1
# ip route del 198.51.100.0/24
RTNETLINK answers: No such process
Fix by matching on such a FIB info when legacy nexthop attributes are
not specified in the request. An earlier check already covers the case
where a nexthop ID is specified in the request.
Add tests that cover these flows. Before the fix:
# ./fib_nexthops.sh -t ipv4_fcnal
...
TEST: Delete route when not specifying nexthop attributes [FAIL]
Tests passed: 11
Tests failed: 1
After the fix:
# ./fib_nexthops.sh -t ipv4_fcnal
...
TEST: Delete route when not specifying nexthop attributes [ OK ]
Tests passed: 12
Tests failed: 0
No regressions in other tests:
# ./fib_nexthops.sh
...
Tests passed: 228
Tests failed: 0
# ./fib_tests.sh
...
Tests passed: 186
Tests failed: 0
Cc: stable@vger.kernel.org
Reported-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Jonas Gorski <jonas.gorski@gmail.com>
Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects")
Fixes: 6bf92d70e690 ("net: ipv4: fix route with nexthop object delete warning")
Fixes: 61b91eb33a69 ("ipv4: Handle attempt to delete multipath route when fib_info contains an nh reference")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20221124210932.2470010-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"x86:
- Fixes for Xen emulation. While nobody should be enabling it in the
kernel (the only public users of the feature are the selftests),
the bug effectively allows userspace to read arbitrary memory.
- Correctness fixes for nested hypervisors that do not intercept INIT
or SHUTDOWN on AMD; the subsequent CPU reset can cause a
use-after-free when it disables virtualization extensions. While
downgrading the panic to a WARN is quite easy, the full fix is a
bit more laborious; there are also tests. This is the bulk of the
pull request.
- Fix race condition due to incorrect mmu_lock use around
make_mmu_pages_available().
Generic:
- Obey changes to the kvm.halt_poll_ns module parameter in VMs not
using KVM_CAP_HALT_POLL, restoring behavior from before the
introduction of the capability"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Update gfn_to_pfn_cache khva when it moves within the same page
KVM: x86/xen: Only do in-kernel acceleration of hypercalls for guest CPL0
KVM: x86/xen: Validate port number in SCHEDOP_poll
KVM: x86/mmu: Fix race condition in direct_page_fault
KVM: x86: remove exit_int_info warning in svm_handle_exit
KVM: selftests: add svm part to triple_fault_test
KVM: x86: allow L1 to not intercept triple fault
kvm: selftests: add svm nested shutdown test
KVM: selftests: move idt_entry to header
KVM: x86: forcibly leave nested mode on vCPU reset
KVM: x86: add kvm_leave_nested
KVM: x86: nSVM: harden svm_free_nested against freeing vmcb02 while still in use
KVM: x86: nSVM: leave nested mode on vCPU free
KVM: Obey kvm.halt_poll_ns in VMs not using KVM_CAP_HALT_POLL
KVM: Avoid re-reading kvm->max_halt_poll_ns during halt-polling
KVM: Cap vcpu->halt_poll_ns before halting rather than after
|
|
Add a few positive/negative tests to test bpf_rcu_read_lock()
and its corresponding verifier support. The new test will fail
on s390x and aarch64, so an entry is added to each of their
respective deny lists.
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221124053222.2374650-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc, netfilter and xfrm.
Current release - regressions:
- dccp/tcp: fix bhash2 issues related to WARN_ON() in
inet_csk_get_port()
- l2tp: don't sleep and disable BH under writer-side sk_callback_lock
- eth: ice: fix handling of burst tx timestamps
Current release - new code bugs:
- xfrm: squelch kernel warning in case XFRM encap type is not
available
- eth: mlx5e: fix possible race condition in macsec extended packet
number update routine
Previous releases - regressions:
- neigh: decrement the family specific qlen
- netfilter: fix ipset regression
- rxrpc: fix race between conn bundle lookup and bundle removal
[ZDI-CAN-15975]
- eth: iavf: do not restart tx queues after reset task failure
- eth: nfp: add port from netdev validation for EEPROM access
- eth: mtk_eth_soc: fix potential memory leak in mtk_rx_alloc()
Previous releases - always broken:
- tipc: set con sock in tipc_conn_alloc
- nfc:
- fix potential memory leaks
- fix incorrect sizing calculations in EVT_TRANSACTION
- eth: octeontx2-af: fix pci device refcount leak
- eth: bonding: fix ICMPv6 header handling when receiving IPv6
messages
- eth: prestera: add missing unregister_netdev() in
prestera_port_create()
- eth: tsnep: fix rotten packets
Misc:
- usb: qmi_wwan: add support for LARA-L6"
* tag 'net-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: thunderx: Fix the ACPI memory leak
octeontx2-af: Fix reference count issue in rvu_sdp_init()
net: altera_tse: release phylink resources in tse_shutdown()
virtio_net: Fix probe failed when modprobe virtio_net
net: wwan: t7xx: Fix the ACPI memory leak
octeontx2-pf: Add check for devm_kcalloc
net: enetc: preserve TX ring priority across reconfiguration
net: marvell: prestera: add missing unregister_netdev() in prestera_port_create()
nfc: st-nci: fix incorrect sizing calculations in EVT_TRANSACTION
nfc: st-nci: fix memory leaks in EVT_TRANSACTION
nfc: st-nci: fix incorrect validating logic in EVT_TRANSACTION
Documentation: networking: Update generic_netlink_howto URL
net/cdc_ncm: Fix multicast RX support for CDC NCM devices with ZLP
net: usb: qmi_wwan: add u-blox 0x1342 composition
l2tp: Don't sleep and disable BH under writer-side sk_callback_lock
net: dm9051: Fix missing dev_kfree_skb() in dm9051_loop_rx()
arcnet: fix potential memory leak in com20020_probe()
ipv4: Fix error return code in fib_table_insert()
net: ethernet: mtk_eth_soc: fix memory leak in error path
net: ethernet: mtk_eth_soc: fix resource leak in error path
...
|
|
Verify when a bond is configured with {up,down}delay and the link state
of slave members flaps if there are no remaining members up the bond
should immediately select a member to bring up. (from bonding.txt
section 13.1 paragraph 4)
Suggested-by: Liang Li <liali@redhat.com>
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add some selftest testcases that validate the expected behavior of the
bpf_task_from_pid() kfunc that was added in the prior patch.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221122145300.251210-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
* append missing optnames to the end
* simplify bpf_getsockopt()'s doc
Signed-off-by: Ji Rongfeng <SikoJobs@outlook.com>
Link: https://lore.kernel.org/r/DU0P192MB15479B86200B1216EC90E162D6099@DU0P192MB1547.EURP192.PROD.OUTLOOK.COM
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
It should trigger a WARN_ON_ONCE in btf_type_id_size:
RIP: 0010:btf_type_id_size+0x8bd/0x940 kernel/bpf/btf.c:1952
btf_func_proto_check kernel/bpf/btf.c:4506 [inline]
btf_check_all_types kernel/bpf/btf.c:4734 [inline]
btf_parse_type_sec+0x1175/0x1980 kernel/bpf/btf.c:4763
btf_parse kernel/bpf/btf.c:5042 [inline]
btf_new_fd+0x65a/0xb00 kernel/bpf/btf.c:6709
bpf_btf_load+0x6f/0x90 kernel/bpf/syscall.c:4342
__sys_bpf+0x50a/0x6c0 kernel/bpf/syscall.c:5034
__do_sys_bpf kernel/bpf/syscall.c:5093 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5091 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5091
do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221123035422.872531-1-sdf@google.com
|
