summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2020-11-13Merge tag 'net-5.10-rc4' of ↵Linus Torvalds9-18/+281
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - regressions: - arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for ENETC Current release - bugs in new features: - mptcp: provide rmem[0] limit offset to fix oops Previous release - regressions: - IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU calculations - lan743x: correctly handle chips with internal PHY - bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE - mlx5e: Fix VXLAN port table synchronization after function reload Previous release - always broken: - bpf: Zero-fill re-used per-cpu map element - fix out-of-order UDP packets when forwarding with UDP GSO fraglists turned on: - fix UDP header access on Fast/frag0 UDP GRO - fix IP header access and skb lookup on Fast/frag0 UDP GRO - ethtool: netlink: add missing netdev_features_change() call - net: Update window_clamp if SOCK_RCVBUF is set - igc: Fix returning wrong statistics - ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload - tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies - r8169: disable hw csum for short packets on all chip versions - vrf: Fix fast path output packet handling with async Netfilter rules" * tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits) lan743x: fix use of uninitialized variable net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO net: udp: fix UDP header access on Fast/frag0 UDP GRO devlink: Avoid overwriting port attributes of registered port vrf: Fix fast path output packet handling with async Netfilter rules cosa: Add missing kfree in error path of cosa_write net: switch to the kernel.org patchwork instance ch_ktls: stop the txq if reaches threshold ch_ktls: tcb update fails sometimes ch_ktls/cxgb4: handle partial tag alone SKBs ch_ktls: don't free skb before sending FIN ch_ktls: packet handling prior to start marker ch_ktls: Correction in middle record handling ch_ktls: missing handling of header alone ch_ktls: Correction in trimmed_len calculation cxgb4/ch_ktls: creating skbs causes panic ch_ktls: Update cheksum information ch_ktls: Correction in finding correct length cxgb4/ch_ktls: decrypted bit is not enough net/x25: Fix null-ptr-deref in x25_connect ...
2020-11-11selftest: fix flower terse dump testsVlad Buslov1-2/+2
Iproute2 tc classifier terse dump has been accepted with modified syntax. Update the tests accordingly. Signed-off-by: Vlad Buslov <vlad@buslov.dev> Fixes: e7534fd42a99 ("selftests: implement flower classifier terse dump tests") Link: https://lore.kernel.org/r/20201107111928.453534-1-vlad@buslov.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-10Merge branch 'turbostat' of ↵Linus Torvalds4-138/+507
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: "Update update to version 20.09.30, one kernel side fix" * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: update version number powercap: restrict energy meter to root access tools/power turbostat: harden against cpu hotplug tools/power turbostat: adjust for temperature offset tools/power turbostat: Build with _FILE_OFFSET_BITS=64 tools/power turbostat: Support AMD Family 19h tools/power turbostat: Remove empty columns for Jacobsville tools/power turbostat: Add a new GFXAMHz column that exposes gt_act_freq_mhz. tools/power x86_energy_perf_policy: Input/output error in a VM tools/power turbostat: Skip pc8, pc9, pc10 columns, if they are disabled tools/power turbostat: Support additional CPU model numbers tools/power turbostat: Fix output formatting for ACPI CST enumeration tools/power turbostat: Replace HTTP links with HTTPS ones: TURBOSTAT UTILITY tools/power turbostat: Use sched_getcpu() instead of hardcoded cpu 0 tools/power turbostat: Enable accumulate RAPL display tools/power turbostat: Introduce functions to accumulate RAPL consumption tools/power turbostat: Make the energy variable to be 64 bit tools/power turbostat: Always print idle in the system configuration header tools/power turbostat: Print /dev/cpu_dma_latency
2020-11-10tools/power turbostat: update version numberLen Brown1-1/+1
goodbye summer... Signed-off-by: Len Brown <len.brown@intel.com>
2020-11-10Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds23-277/+2252
Pull kvm fixes from Paolo Bonzini: "ARM: - fix compilation error when PMD and PUD are folded - fix regression in reads-as-zero behaviour of ID_AA64ZFR0_EL1 - add aarch64 get-reg-list test x86: - fix semantic conflict between two series merged for 5.10 - fix (and test) enforcement of paravirtual cpuid features selftests: - various cleanups to memory management selftests - new selftests testcase for performance of dirty logging" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits) KVM: selftests: allow two iterations of dirty_log_perf_test KVM: selftests: Introduce the dirty log perf test KVM: selftests: Make the number of vcpus global KVM: selftests: Make the per vcpu memory size global KVM: selftests: Drop pointless vm_create wrapper KVM: selftests: Add wrfract to common guest code KVM: selftests: Simplify demand_paging_test with timespec_diff_now KVM: selftests: Remove address rounding in guest code KVM: selftests: Factor code out of demand_paging_test KVM: selftests: Use a single binary for dirty/clear log test KVM: selftests: Always clear dirty bitmap after iteration KVM: selftests: Add blessed SVE registers to get-reg-list KVM: selftests: Add aarch64 get-reg-list test selftests: kvm: test enforcement of paravirtual cpuid features selftests: kvm: Add exception handling to selftests selftests: kvm: Clear uc so UCALL_NONE is being properly reported selftests: kvm: Fix the segment descriptor layout to match the actual layout KVM: x86: handle MSR_IA32_DEBUGCTLMSR with report_ignored_msrs kvm: x86: request masterclock update any time guest uses different msr kvm: x86: ensure pv_cpuid.features is initialized when enabling cap ...
2020-11-09KVM: selftests: allow two iterations of dirty_log_perf_testPaolo Bonzini1-1/+1
Even though one iteration is not enough for the dirty log performance test (due to the cost of building page tables, zeroing memory etc.) two is okay and it is the default. Without this patch, "./dirty_log_perf_test" without any further arguments fails. Cc: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Introduce the dirty log perf testBen Gardon6-8/+396
The dirty log perf test will time verious dirty logging operations (enabling dirty logging, dirtying memory, getting the dirty log, clearing the dirty log, and disabling dirty logging) in order to quantify dirty logging performance. This test can be used to inform future performance improvements to KVM's dirty logging infrastructure. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201027233733.1484855-6-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Make the number of vcpus globalAndrew Jones2-20/+20
We also check the input number of vcpus against the maximum supported. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201104212357.171559-8-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Make the per vcpu memory size globalAndrew Jones2-12/+11
Rename vcpu_memory_bytes to something with "percpu" in it in order to be less ambiguous. Also make it global to simplify things. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201104212357.171559-7-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Drop pointless vm_create wrapperAndrew Jones4-9/+3
Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201104212357.171559-3-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Add wrfract to common guest codeBen Gardon2-1/+7
Wrfract will be used by the dirty logging perf test introduced later in this series to dirty memory sparsely. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201027233733.1484855-5-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Simplify demand_paging_test with timespec_diff_nowBen Gardon3-15/+27
Add a helper function to get the current time and return the time since a given start time. Use that function to simplify the timekeeping in the demand paging test. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201027233733.1484855-4-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Remove address rounding in guest codeBen Gardon1-1/+0
Rounding the address the guest writes to a host page boundary will only have an effect if the host page size is larger than the guest page size, but in that case the guest write would still go to the same host page. There's no reason to round the address down, so remove the rounding to simplify the demand paging test. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201027233733.1484855-3-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Factor code out of demand_paging_testBen Gardon2-181/+210
Much of the code in demand_paging_test can be reused by other, similar multi-vCPU-memory-touching-perfromance-tests. Factor that common code out for reuse. No functional change expected. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201027233733.1484855-2-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Use a single binary for dirty/clear log testPeter Xu3-39/+156
Remove the clear_dirty_log test, instead merge it into the existing dirty_log_test. It should be cleaner to use this single binary to do both tests, also it's a preparation for the upcoming dirty ring test. The default behavior will run all the modes in sequence. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20201001012233.6013-1-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Always clear dirty bitmap after iterationPeter Xu1-1/+1
We used not to clear the dirty bitmap before because KVM_GET_DIRTY_LOG would overwrite it the next time it copies the dirty log onto it. In the upcoming dirty ring tests we'll start to fetch dirty pages from a ring buffer, so no one is going to clear the dirty bitmap for us. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20201001012228.5916-1-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Add blessed SVE registers to get-reg-listAndrew Jones4-42/+217
Add support for the SVE registers to get-reg-list and create a new test, get-reg-list-sve, which tests them when running on a machine with SVE support. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201029201703.102716-5-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Add aarch64 get-reg-list testAndrew Jones5-0/+703
Check for KVM_GET_REG_LIST regressions. The blessed list was created by running on v4.15 with the --core-reg-fixup option. The following script was also used in order to annotate system registers with their names when possible. When new system registers are added the names can just be added manually using the same grep. while read reg; do if [[ ! $reg =~ ARM64_SYS_REG ]]; then printf "\t$reg\n" continue fi encoding=$(echo "$reg" | sed "s/ARM64_SYS_REG(//;s/),//") if ! name=$(grep "$encoding" ../../../../arch/arm64/include/asm/sysreg.h); then printf "\t$reg\n" continue fi name=$(echo "$name" | sed "s/.*SYS_//;s/[\t ]*sys_reg($encoding)$//") printf "\t$reg\t/* $name */\n" done < <(aarch64/get-reg-list --core-reg-fixup --list) Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201029201703.102716-3-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08selftests: kvm: test enforcement of paravirtual cpuid featuresOliver Upton7-0/+308
Add a set of tests that ensure the guest cannot access paravirtual msrs and hypercalls that have been disabled in the KVM_CPUID_FEATURES leaf. Expect a #GP in the case of msr accesses and -KVM_ENOSYS from hypercalls. Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Peter Shier <pshier@google.com> Reviewed-by: Aaron Lewis <aaronlewis@google.com> Message-Id: <20201027231044.655110-7-oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08selftests: kvm: Add exception handling to selftestsAaron Lewis9-9/+244
Add the infrastructure needed to enable exception handling in selftests. This allows any of the exception and interrupt vectors to be overridden in the guest. Signed-off-by: Aaron Lewis <aaronlewis@google.com> Reviewed-by: Alexander Graf <graf@amazon.com> Message-Id: <20201012194716.3950330-4-aaronlewis@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08selftests: kvm: Clear uc so UCALL_NONE is being properly reportedAaron Lewis3-0/+9
Ensure the out value 'uc' in get_ucall() is properly reporting UCALL_NONE if the call fails. The return value will be correctly reported, however, the out parameter 'uc' will not be. Clear the struct to ensure the correct value is being reported in the out parameter. Signed-off-by: Aaron Lewis <aaronlewis@google.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Alexander Graf <graf@amazon.com> Message-Id: <20201012194716.3950330-3-aaronlewis@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08selftests: kvm: Fix the segment descriptor layout to match the actual layoutAaron Lewis2-2/+3
Fix the layout of 'struct desc64' to match the layout described in the SDM Vol 3, Chapter 3 "Protected-Mode Memory Management", section 3.4.5 "Segment Descriptors", Figure 3-8 "Segment Descriptor". The test added later in this series relies on this and crashes if this layout is not correct. Signed-off-by: Aaron Lewis <aaronlewis@google.com> Reviewed-by: Alexander Graf <graf@amazon.com> Message-Id: <20201012194716.3950330-2-aaronlewis@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski8-16/+279
Alexei Starovoitov says: ==================== pull-request: bpf 2020-11-06 1) Pre-allocated per-cpu hashmap needs to zero-fill reused element, from David. 2) Tighten bpf_lsm function check, from KP. 3) Fix bpftool attaching to flow dissector, from Lorenz. 4) Use -fno-gcse for the whole kernel/bpf/core.c instead of function attribute, from Ard. * git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Update verification logic for LSM programs bpf: Zero-fill re-used per-cpu map element bpf: BPF_PRELOAD depends on BPF_SYSCALL tools/bpftool: Fix attaching flow dissector libbpf: Fix possible use after free in xsk_socket__delete libbpf: Fix null dereference in xsk_socket__delete libbpf, hashmap: Fix undefined behavior in hash_bits bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE tools, bpftool: Remove two unused variables. tools, bpftool: Avoid array index warnings. xsk: Fix possible memory leak at socket close bpf: Add struct bpf_redir_neigh forward declaration to BPF helper defs samples/bpf: Set rlimit for memlock to infinity in all samples bpf: Fix -Wshadow warnings selftest/bpf: Fix profiler test using CO-RE relocation for enums ==================== Link: https://lore.kernel.org/r/20201106221759.24143-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-07Merge tag 'linux-kselftest-fixes-5.10-rc3' of ↵Linus Torvalds34-56/+65
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Fixes to the ftrace test and several fixes from Tommi Rantala for various other tests" * tag 'linux-kselftest-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: binderfs: use SKIP instead of XFAIL selftests: clone3: use SKIP instead of XFAIL selftests: core: use SKIP instead of XFAIL in close_range_test.c selftests: proc: fix warning: _GNU_SOURCE redefined selftests: pidfd: drop needless linux/kcmp.h inclusion in pidfd_setns_test.c selftests: pidfd: add CONFIG_CHECKPOINT_RESTORE=y to config selftests: pidfd: skip test on kcmp() ENOSYS selftests: pidfd: use ksft_test_result_skip() when skipping test selftests/harness: prettify SKIP message whitespace again selftests: pidfd: fix compilation errors due to wait.h selftests: filter kselftest headers from command in lib.mk selftests/ftrace: check for do_sys_openat2 in user-memory test selftests/ftrace: Use $FUNCTION_FORK to reference kernel fork function
2020-11-06Merge tag 'net-5.10-rc3' of ↵Linus Torvalds2-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.10-rc3, including fixes from wireless, can, and netfilter subtrees. Current merge window - bugs in new features: - can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode Previous releases - regressions: - mac80211: - don't require VHT elements for HE on 2.4 GHz - fix regression where EAPOL frames were sent in plaintext - netfilter: - ipset: Update byte and packet counters regardless of whether they match - ip_tunnel: fix over-mtu packet send by allowing fragmenting even if inner packet has IP_DF (don't fragment) set in its header (when TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev) - net: fec: fix MDIO probing for some FEC hardware blocks - ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break gso support - sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian platforms, sparse-related fix used the wrong integer size Previous releases - always broken: - netfilter: use actual socket sk rather than skb sk when routing harder - r8169: work around short packet hw bug on RTL8125 by padding frames - net: ethernet: ti: cpsw: disable PTPv1 hw timestamping advertisement, the hardware does not support it - chelsio/chtls: fix always leaking ctrl_skb and another leak caused by a race condition - fix drivers incorrectly writing into skbs on TX: - cadence: force nonlinear buffers to be cloned - gianfar: Account for Tx PTP timestamp in the skb headroom - gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP - can: flexcan: - remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A - add ECC initialization for VF610 and LX2160A - flexcan_remove(): disable wakeup completely - can: fix packet echo functionality: - peak_canfd: fix echo management when loopback is on - make sure skbs are not freed in IRQ context in case they need to be dropped - always clone the skbs to make sure they have a reference on the socket, and prevent it from disappearing - fix real payload length return value for RTR frames - can: j1939: return failure on bind if netdev is down, rather than waiting indefinitely Misc: - IPv6: reply ICMP error if the first fragment don't include all headers to improve compliance with RFC 8200" * tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits) ionic: check port ptr before use r8169: work around short packet hw bug on RTL8125 net: openvswitch: silence suspicious RCU usage warning chelsio/chtls: fix always leaking ctrl_skb chelsio/chtls: fix memory leaks caused by a race can: flexcan: flexcan_remove(): disable wakeup completely can: flexcan: add ECC initialization for VF610 can: flexcan: add ECC initialization for LX2160A can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A can: mcp251xfd: remove unneeded break can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping can: peak_usb: add range checking in decode operations can: xilinx_can: handle failure cases of pm_runtime_get_sync can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path can: isotp: padlen(): make const array static, makes object smaller can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode can: isotp: Explain PDU in CAN_ISOTP help text ...
2020-11-06bpf: Zero-fill re-used per-cpu map elementDavid Verbeiren2-0/+247
Zero-fill element values for all other cpus than current, just as when not using prealloc. This is the only way the bpf program can ensure known initial values for all cpus ('onallcpus' cannot be set when coming from the bpf program). The scenario is: bpf program inserts some elements in a per-cpu map, then deletes some (or userspace does). When later adding new elements using bpf_map_update_elem(), the bpf program can only set the value of the new elements for the current cpu. When prealloc is enabled, previously deleted elements are re-used. Without the fix, values for other cpus remain whatever they were when the re-used entry was previously freed. A selftest is added to validate correct operation in above scenario as well as in case of LRU per-cpu map element re-use. Fixes: 6c9059817432 ("bpf: pre-allocate hash map elements") Signed-off-by: David Verbeiren <david.verbeiren@tessares.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201104112332.15191-1-david.verbeiren@tessares.net
2020-11-06tools/bpftool: Fix attaching flow dissectorLorenz Bauer1-1/+1
My earlier patch to reject non-zero arguments to flow dissector attach broke attaching via bpftool. Instead of 0 it uses -1 for target_fd. Fix this by passing a zero argument when attaching the flow dissector. Fixes: 1b514239e859 ("bpf: flow_dissector: Check value of unused flags to BPF_PROG_ATTACH") Reported-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20201105115230.296657-1-lmb@cloudflare.com
2020-11-05Merge tag 'linux-kselftest-kunit-fixes-5.10-rc3' of ↵Linus Torvalds8-14/+37
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kunit fixes from Shuah Khan: "Several kunit_tool and documentation fixes" * tag 'linux-kselftest-kunit-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tools: fix kunit_tool tests for parsing test plans Documentation: kunit: Update Kconfig parts for KUNIT's module support kunit: test: fix remaining kernel-doc warnings kunit: Don't fail test suites if one of them is empty kunit: Fix kunit.py --raw_output option
2020-11-05selftests: binderfs: use SKIP instead of XFAILTommi Rantala1-4/+4
XFAIL is gone since commit 9847d24af95c ("selftests/harness: Refactor XFAIL into SKIP"), use SKIP instead. Fixes: 9847d24af95c ("selftests/harness: Refactor XFAIL into SKIP") Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-11-05selftests: clone3: use SKIP instead of XFAILTommi Rantala1-1/+1
XFAIL is gone since commit 9847d24af95c ("selftests/harness: Refactor XFAIL into SKIP"), use SKIP instead. Fixes: 9847d24af95c ("selftests/harness: Refactor XFAIL into SKIP") Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-11-05selftests: core: use SKIP instead of XFAIL in close_range_test.cTommi Rantala1-4/+4
XFAIL is gone since commit 9847d24af95c ("selftests/harness: Refactor XFAIL into SKIP"), use SKIP instead. Fixes: 9847d24af95c ("selftests/harness: Refactor XFAIL into SKIP") Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-11-05selftests: proc: fix warning: _GNU_SOURCE redefinedTommi Rantala3-3/+0
Makefile already contains -D_GNU_SOURCE, so we can remove it from the *.c files. Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-11-04libbpf: Fix possible use after free in xsk_socket__deleteMagnus Karlsson1-2/+4
Fix a possible use after free in xsk_socket__delete that will happen if xsk_put_ctx() frees the ctx. To fix, save the umem reference taken from the context and just use that instead. Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/1604396490-12129-3-git-send-email-magnus.karlsson@gmail.com
2020-11-04libbpf: Fix null dereference in xsk_socket__deleteMagnus Karlsson1-1/+2
Fix a possible null pointer dereference in xsk_socket__delete that will occur if a null pointer is fed into the function. Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices") Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/1604396490-12129-2-git-send-email-magnus.karlsson@gmail.com
2020-11-04Merge tag 'perf-tools-for-v5.10-2020-11-03' of ↵Linus Torvalds35-52/+257
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: "Only fixes and a sync of the headers so that the perf build is silent: - Fix visibility attribute in python module init code with newer gcc - Fix DRAM_BW_Use 0 issue for CLX/SKX in intel JSON vendor event files - Fix the build on new fedora by removing LTO compiler options when building perl support - Remove broken __no_tail_call attribute - Fix segfault when trying to trace events by cgroup - Fix crash with non-jited BPF progs - Increase buffer size in TUI browser, fixing format truncation - Fix printing of build-id for objects lacking one - Fix byte swapping for ino_generation field in MMAP2 perf.data records - Fix byte swapping for CGROUP perf.data records, for cross arch analysis of perf.data files - Fix the fast path of feature detection - Update kernel header copies" * tag 'perf-tools-for-v5.10-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits) tools feature: Fixup fast path feature detection perf tools: Add missing swap for cgroup events perf tools: Add missing swap for ino_generation perf tools: Initialize output buffer in build_id__sprintf perf hists browser: Increase size of 'buf' in perf_evsel__hists_browse() tools include UAPI: Update linux/mount.h copy tools headers UAPI: Update tools's copy of linux/perf_event.h tools kvm headers: Update KVM headers from the kernel sources tools UAPI: Update copy of linux/mman.h from the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools x86 headers: Update required-features.h header from the kernel tools x86 headers: Update cpufeatures.h headers copies tools headers UAPI: Update fscrypt.h copy tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync prctl.h with the kernel sources perf scripting python: Avoid declaring function pointers with a visibility attribute perf tools: Remove broken __no_tail_call attribute perf vendor events: Fix DRAM_BW_Use 0 issue for CLX/SKX perf trace: Fix segfault when trying to trace events by cgroup perf tools: Fix crash with non-jited bpf progs ...
2020-11-04Merge tag 'docs-5.10-warnings' of git://git.lwn.net/linuxLinus Torvalds1-22/+22
Pull documentation build warning fixes from Jonathan Corbet: "This contains a series of warning fixes from Mauro; once applied, the number of warnings from the once-noisy docs build process is nearly zero. Getting to this point has required a lot of work; once there, hopefully we can keep things that way. I have packaged this as a separate pull because it does a fair amount of reaching outside of Documentation/. The changes are all in comments and in code placement. It's all been in linux-next since last week" * tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits) docs: SafeSetID: fix a warning amdgpu: fix a few kernel-doc markup issues selftests: kselftest_harness.h: fix kernel-doc markups drm: amdgpu_dm: fix a typo gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups drm: amdgpu: kernel-doc: update some adev parameters docs: fs: api-summary.rst: get rid of kernel-doc include IB/srpt: docs: add a description for cq_size member locking/refcount: move kernel-doc markups to the proper place docs: lockdep-design: fix some warning issues MAINTAINERS: fix broken doc refs due to yaml conversion ice: docs fix a devlink info that broke a table crypto: sun8x-ce*: update entries to its documentation net: phy: remove kernel-doc duplication mm: pagemap.h: fix two kernel-doc markups blk-mq: docs: add kernel-doc description for a new struct member docs: userspace-api: add iommu.rst to the index file docs: hwmon: mp2975.rst: address some html build warnings docs: net: statistics.rst: remove a duplicated kernel-doc docs: kasan.rst: add two missing blank lines ...
2020-11-03tools feature: Fixup fast path feature detectionArnaldo Carvalho de Melo1-1/+0
22dd1ac91a776752 ("tools: Remove feature-libelf-mmap feature detection") correctly simplified the this feature detection, but forgot to remove the call to the removed function in the main() function for the test-all.c fast path feature detection, making it fail and thus do all the feature detection individually, fix it. $ cat /tmp/build/perf/feature/test-all.make.output test-all.c: In function ‘main’: test-all.c:188:2: error: implicit declaration of function ‘main_test_libelf_mmap’; did you mean ‘main_test_libelf’? [-Werror=implicit-function-declaration] 188 | main_test_libelf_mmap(); | ^~~~~~~~~~~~~~~~~~~~~ | main_test_libelf cc1: all warnings being treated as errors $ vim tools/build/feature/test-all.c $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;make V=1 -k O=/tmp/build/perf -C tools/perf install-bin ; perf test python <SNIP> $ cat /tmp/build/perf/feature/test-all.make.output $ Fixes: 22dd1ac91a776752 ("tools: Remove feature-libelf-mmap feature detection") Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-03perf tools: Add missing swap for cgroup eventsNamhyung Kim1-0/+13
It was missed to add a swap function for PERF_RECORD_CGROUP. Fixes: ba78c1c5461c ("perf tools: Basic support for CGROUP event") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20201102140228.303657-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-03perf tools: Add missing swap for ino_generationJiri Olsa1-0/+1
We are missing swap for ino_generation field. Fixes: 5c5e854bc760 ("perf tools: Add attr->mmap2 support") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20201101233103.3537427-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-03perf tools: Initialize output buffer in build_id__sprintfJiri Olsa1-0/+2
We display garbage for undefined build_id objects, because we don't initialize the output buffer. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20201101233103.3537427-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-03perf hists browser: Increase size of 'buf' in perf_evsel__hists_browse()Song Liu1-1/+1
Making perf with gcc-9.1.1 generates the following warning: CC ui/browsers/hists.o ui/browsers/hists.c: In function 'perf_evsel__hists_browse': ui/browsers/hists.c:3078:61: error: '%d' directive output may be \ truncated writing between 1 and 11 bytes into a region of size \ between 2 and 12 [-Werror=format-truncation=] 3078 | "Max event group index to sort is %d (index from 0 to %d)", | ^~ ui/browsers/hists.c:3078:7: note: directive argument in the range [-2147483648, 8] 3078 | "Max event group index to sort is %d (index from 0 to %d)", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/stdio.h:937, from ui/browsers/hists.c:5: IOW, the string in line 3078 might be too long for buf[] of 64 bytes. Fix this by increasing the size of buf[] to 128. Fixes: dbddf1747441 ("perf report/top TUI: Support hotkeys to let user select any event for sorting") Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: stable@vger.kernel.org # v5.7+ Link: http://lore.kernel.org/lkml/20201030235431.534417-1-songliubraving@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-03tools include UAPI: Update linux/mount.h copyArnaldo Carvalho de Melo1-0/+1
To pick the changes from: dab741e0e02bd3c4 ("Add a "nosymfollow" mount option.") That ends up adding support for the new MS_NOSYMFOLLOW mount flag: $ tools/perf/trace/beauty/mount_flags.sh > before $ cp include/uapi/linux/mount.h tools/include/uapi/linux/mount.h $ tools/perf/trace/beauty/mount_flags.sh > after $ diff -u before after --- before 2020-11-03 08:51:28.117997454 -0300 +++ after 2020-11-03 08:51:38.992218869 -0300 @@ -7,6 +7,7 @@ [32 ? (ilog2(32) + 1) : 0] = "REMOUNT", [64 ? (ilog2(64) + 1) : 0] = "MANDLOCK", [128 ? (ilog2(128) + 1) : 0] = "DIRSYNC", + [256 ? (ilog2(256) + 1) : 0] = "NOSYMFOLLOW", [1024 ? (ilog2(1024) + 1) : 0] = "NOATIME", [2048 ? (ilog2(2048) + 1) : 0] = "NODIRATIME", [4096 ? (ilog2(4096) + 1) : 0] = "BIND", $ So now one can use it in --filter expressions for tracepoints. This silences this perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/linux/mount.h' differs from latest version at 'include/uapi/linux/mount.h' diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mattias Nissler <mnissler@chromium.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-03tools headers UAPI: Update tools's copy of linux/perf_event.hArnaldo Carvalho de Melo1-1/+1
The diff is just tabs versus spaces, trivial. This silences this perf tools build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h' diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-03tools kvm headers: Update KVM headers from the kernel sourcesArnaldo Carvalho de Melo6-1/+82
Some should cause changes in tooling, like the one adding LAST_EXCP, but the way it is structured end up not making that happen. The new SVM_EXIT_INVPCID should get used by arch/x86/util/kvm-stat.c, in the svm_exit_reasons table. The tools/perf/trace/beauty part has scripts to catch changes and automagically create tables, like tools/perf/trace/beauty/kvm_ioctl.sh, but changes are needed to make tools/perf/arch/x86/util/kvm-stat.c catch those automatically. These were handled by the existing scripts: $ tools/perf/trace/beauty/kvm_ioctl.sh > before $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h $ tools/perf/trace/beauty/kvm_ioctl.sh > after $ diff -u before after --- before 2020-11-03 08:43:52.910728608 -0300 +++ after 2020-11-03 08:44:04.273959984 -0300 @@ -89,6 +89,7 @@ [0xbf] = "SET_NESTED_STATE", [0xc0] = "CLEAR_DIRTY_LOG", [0xc1] = "GET_SUPPORTED_HV_CPUID", + [0xc6] = "X86_SET_MSR_FILTER", [0xe0] = "CREATE_DEVICE", [0xe1] = "SET_DEVICE_ATTR", [0xe2] = "GET_DEVICE_ATTR", $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-11-03 08:45:55.522225198 -0300 +++ after 2020-11-03 08:46:12.881578666 -0300 @@ -37,4 +37,5 @@ [0x71] = "VDPA_GET_STATUS", [0x73] = "VDPA_GET_CONFIG", [0x76] = "VDPA_GET_VRING_NUM", + [0x78] = "VDPA_GET_IOVA_RANGE", }; $ This addresses these perf build warnings: Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/sie.h' differs from latest version at 'arch/s390/include/uapi/asm/sie.h' diff -u tools/arch/s390/include/uapi/asm/sie.h arch/s390/include/uapi/asm/sie.h Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h' diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Cc: Borislav Petkov <bp@suse.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joerg Roedel <jroedel@suse.de> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-03tools UAPI: Update copy of linux/mman.h from the kernel sourcesArnaldo Carvalho de Melo1-0/+1
e47168f3d1b14af5 ("powerpc/8xx: Support 16k hugepages with 4k pages") That don't cause any changes in tooling, just addresses this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h' diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-03tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo1-0/+10
To pick up the changes in: 29dcc60f6a19fb0a ("x86/boot/compressed/64: Add stage1 #VC handler") 36e1be8ada994d50 ("perf/x86/amd/ibs: Fix raw sample data accumulation") 59a854e2f3b90ad2 ("perf/x86/intel: Support TopDown metrics on Ice Lake") 7b2c05a15d29d057 ("perf/x86/intel: Generic support for hardware TopDown metrics") 99e40204e014e066 ("x86/msr: Move the F15h MSRs where they belong") b57de6cd16395be1 ("x86/sev-es: Add SEV-ES Feature Detection") ed7bde7a6dab521e ("cpufreq: intel_pstate: Allow enable/disable energy efficiency") f0f2f9feb4ee6f28 ("x86/msr-index: Define an IA32_PASID MSR") That cause these changes in tooling: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2020-10-19 13:27:33.195274425 -0300 +++ after 2020-10-19 13:27:44.144507610 -0300 @@ -113,6 +113,8 @@ [0x00000309] = "CORE_PERF_FIXED_CTR0", [0x0000030a] = "CORE_PERF_FIXED_CTR1", [0x0000030b] = "CORE_PERF_FIXED_CTR2", + [0x0000030c] = "CORE_PERF_FIXED_CTR3", + [0x00000329] = "PERF_METRICS", [0x00000345] = "IA32_PERF_CAPABILITIES", [0x0000038d] = "CORE_PERF_FIXED_CTR_CTRL", [0x0000038e] = "CORE_PERF_GLOBAL_STATUS", @@ -222,6 +224,7 @@ [0x00000774] = "HWP_REQUEST", [0x00000777] = "HWP_STATUS", [0x00000d90] = "IA32_BNDCFGS", + [0x00000d93] = "IA32_PASID", [0x00000da0] = "IA32_XSS", [0x00000dc0] = "LBR_INFO_0", [0x00000ffc] = "IA32_BNDCFGS_RSVD", @@ -279,6 +282,7 @@ [0xc0010115 - x86_AMD_V_KVM_MSRs_offset] = "VM_IGNNE", [0xc0010117 - x86_AMD_V_KVM_MSRs_offset] = "VM_HSAVE_PA", [0xc001011f - x86_AMD_V_KVM_MSRs_offset] = "AMD64_VIRT_SPEC_CTRL", + [0xc0010130 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV_ES_GHCB", [0xc0010131 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV", [0xc0010140 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_OSVW_ID_LENGTH", [0xc0010141 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_OSVW_STATUS", $ Which causes these parts of tools/perf/ to be rebuilt: CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o DESCEND plugins GEN /tmp/build/perf/python/perf.so INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/per At some point these should just be tables read by perf on demand. This addresses this perf tools build warning: diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joerg Roedel <jroedel@suse.de> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-03tools x86 headers: Update required-features.h header from the kernelArnaldo Carvalho de Melo1-1/+1
To pick the changes from: ecac71816a1829c0 ("x86/paravirt: Use CONFIG_PARAVIRT_XXL instead of CONFIG_PARAVIRT") That don entail any changes in tooling, just addressing these perf tools build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/required-features.h' differs from latest version at 'arch/x86/include/asm/required-features.h' diff -u tools/arch/x86/include/asm/required-features.h arch/x86/include/asm/required-features.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-03tools x86 headers: Update cpufeatures.h headers copiesArnaldo Carvalho de Melo2-2/+13
To pick the changes from: 5866e9205b47a983 ("x86/cpu: Add hardware-enforced cache coherency as a CPUID feature") ff4f82816dff28ff ("x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions") 360e7c5c4ca4fd8e ("x86/cpufeatures: Add SEV-ES CPU feature") 18ec63faefb3fd31 ("x86/cpufeatures: Enumerate TSX suspend load address tracking instructions") e48cb1a3fb916500 ("x86/resctrl: Enumerate per-thread MBA controls") Which don't cause any changes in tooling, just addresses these build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h' diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Krish Sadhukhan <krish.sadhukhan@oracle.com> Cc: Kyung Min Park <kyung.min.park@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-03tools headers UAPI: Update fscrypt.h copyArnaldo Carvalho de Melo1-3/+3
To get the changes from: c7f0207b613033c5 ("fscrypt: make "#define fscrypt_policy" user-only") That don't cause any changes in tools/perf, only addresses this perf tools build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h' diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-03tools headers UAPI: Sync drm/i915_drm.h with the kernel sourcesArnaldo Carvalho de Melo1-3/+56
To pick the changes in: 13149e8bafc46572 ("drm/i915: add syncobj timeline support") cda9edd02425d790 ("drm/i915: introduce a mechanism to extend execbuf2") That don't result in any changes in tooling, just silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-08 12:13:13 +0300