| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - regressions:
- bpf: fix crash due to out of bounds access into reg2btf_ids
- mvpp2: always set port pcs ops, avoid null-deref
- eth: marvell: fix driver load from initrd
- eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC"
Current release - new code bugs:
- mptcp: fix race in overlapping signal events
Previous releases - regressions:
- xen-netback: revert hotplug-status changes causing devices to not
be configured
- dsa:
- avoid call to __dev_set_promiscuity() while rtnl_mutex isn't
held
- fix panic when removing unoffloaded port from bridge
- dsa: microchip: fix bridging with more than two member ports
Previous releases - always broken:
- bpf:
- fix crash due to incorrect copy_map_value when both spin lock
and timer are present in a single value
- fix a bpf_timer initialization issue with clang
- do not try bpf_msg_push_data with len 0
- add schedule points in batch ops
- nf_tables:
- unregister flowtable hooks on netns exit
- correct flow offload action array size
- fix a couple of memory leaks
- vsock: don't check owner in vhost_vsock_stop() while releasing
- gso: do not skip outer ip header in case of ipip and net_failover
- smc: use a mutex for locking "struct smc_pnettable"
- openvswitch: fix setting ipv6 fields causing hw csum failure
- mptcp: fix race in incoming ADD_ADDR option processing
- sysfs: add check for netdevice being present to speed_show
- sched: act_ct: fix flow table lookup after ct clear or switching
zones
- eth: intel: fixes for SR-IOV forwarding offloads
- eth: broadcom: fixes for selftests and error recovery
- eth: mellanox: flow steering and SR-IOV forwarding fixes
Misc:
- make __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor
friends not report freed skbs as drops
- force inlining of checksum functions in net/checksum.h"
* tag 'net-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: mv643xx_eth: process retval from of_get_mac_address
ping: remove pr_err from ping_lookup
Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC"
openvswitch: Fix setting ipv6 fields causing hw csum failure
ipv6: prevent a possible race condition with lifetimes
net/smc: Use a mutex for locking "struct smc_pnettable"
bnx2x: fix driver load from initrd
Revert "xen-netback: Check for hotplug-status existence before watching"
Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"
net/mlx5e: Fix VF min/max rate parameters interchange mistake
net/mlx5e: Add missing increment of count
net/mlx5e: MPLSoUDP decap, fix check for unsupported matches
net/mlx5e: Fix MPLSoUDP encap to use MPLS action information
net/mlx5e: Add feature check for set fec counters
net/mlx5e: TC, Skip redundant ct clear actions
net/mlx5e: TC, Reject rules with forward and drop actions
net/mlx5e: TC, Reject rules with drop and modify hdr action
net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets
net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
net/mlx5: Fix possible deadlock on rule deletion
...
|
|
Add "-c --perf" option in cpupower-frequency-info to get the performance
and frequency values for AMD P-State.
Commit message amended:
Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
UBSAN_BOUNDS and UBSAN_TRAP depend on UBSAN config option.
merge_config.sh script generates following warnings if parent config
doesn't have UBSAN config already enabled and UBSAN_BOUNDS/UBSAN_TRAP
config options don't get added to the parent config.
Value requested for CONFIG_UBSAN_BOUNDS not in final .config
Requested value: CONFIG_UBSAN_BOUNDS=y
Actual value:
Value requested for CONFIG_UBSAN_TRAP not in final .config
Requested value: CONFIG_UBSAN_TRAP=y
Actual value:
Fix this by including UBSAN config.
Fixes: c75be56e35b2 ("lkdtm/bugs: Add ARRAY_BOUNDS to selftests")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
CONFIG_HARDENED_USERCOPY_FALLBACK config option has been removed in
commit 53944f171a89 ("mm: remove HARDENED_USERCOPY_FALLBACK"). Remove it
from the lkdtm selftest config.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Rename file for readability purpose. Update its usage and references.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Selftests need kernel headers and glibc for compilation. In compilation
of selftests, uapi headers from kernel source are used instead of
default ones while glibc has already been compiled with different header
files installed in the operating system. So there can be redefination
warnings from compiler. These warnings can be suppressed by using
-isystem to include the uapi headers.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The defination of swap() is used from kernel's internal header when this
test is built in source tree. The build fails when this test is built
out of source tree as defination of swap() isn't found. Selftests
shouldn't depend on kernel's internal header files. They can only depend
on uapi header files. Add the defination of swap() to fix the build
error:
gcc -Wall -I/linux_mainline2/build/usr/include -no-pie userfaultfd.c -lrt -lpthread -o /linux_mainline2/build/kselftest/vm/userfaultfd
userfaultfd.c: In function ‘userfaultfd_stress’:
userfaultfd.c:1530:3: warning: implicit declaration of function ‘swap’; did you mean ‘swab’? [-Wimplicit-function-declaration]
1530 | swap(area_src, area_dst);
| ^~~~
| swab
/usr/bin/ld: /tmp/cclUUH7V.o: in function `userfaultfd_stress':
userfaultfd.c:(.text+0x4d64): undefined reference to `swap'
/usr/bin/ld: userfaultfd.c:(.text+0x4d82): undefined reference to `swap'
collect2: error: ld returned 1 exit status
Fixes: 2c769ed7137a ("tools/testing/selftests/vm/userfaultfd.c: use swap() to make code cleaner")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Out of tree build of this test fails if relative path of the output
directory is specified. Add the KHDR_INCLUDES to correctly reach the
headers.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Out of tree build of this test fails if relative path of the output
directory is specified. Add the KHDR_INCLUDES to correctly reach the
headers.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Out of tree build of this test fails if relative path of the output
directory is specified. Add the KHDR_INCLUDES to correctly reach the
headers.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Out of tree build of this test fails if relative path of the output
directory is specified. Add the KHDR_INCLUDES to correctly reach the
headers.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Mickaël Salaün <mic@linux.microsoft.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Out of tree build of this test fails if relative path of the output
directory is specified. Add KHDR_INCLUDES to correctly reach the
headers.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Out of tree build of this test fails if relative path of the output
directory is specified. KBUILD_OUTPUT also doesn't point to the correct
directory when relative path is used. Thus out of tree builds fail.
Remove the un-needed include paths and use KHDR_INCLUDES to correctly
reach the headers.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
uapi headers should be installed at the top of the object tree,
"<obj_tree>/usr/include". There is no need for kernel headers to
be present at kselftest build directory, "<obj_tree>/kselftest/usr/
include" as well. This duplication can be avoided by correctly
specifying the INSTALL_HDR_PATH.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Kernel uapi headers can be present at different paths depending upon
how the build was invoked. It becomes impossible for the tests to
include the correct headers directory. Set and export KHDR_INCLUDES
variable to make it possible for sub make files to include the header
files.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The build of kselftests fails if relative path is specified through
KBUILD_OUTPUT or O=<path> method. BUILD variable is used to determine
the path of the output objects. When make is run from other directories
with relative paths, the exact path of the build objects is ambiguous
and build fails.
make[1]: Entering directory '/home/usama/repos/kernel/linux_mainline2/tools/testing/selftests/alsa'
gcc mixer-test.c -L/usr/lib/x86_64-linux-gnu -lasound -o build/kselftest/alsa/mixer-test
/usr/bin/ld: cannot open output file build/kselftest/alsa/mixer-test
Set the BUILD variable to the absolute path of the output directory.
Make the logic readable and easy to follow. Use spaces instead of tabs
for indentation as if with tab indentation is considered recipe in make.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
If only futex selftest is compiled, uapi header files are copied to the
selftests/futex/functional directory. This copy isn't needed. Set the
DEFAULT_INSTALL_HDR_PATH variable to 1 to use the default header install
path only. This removes extra copy of header file.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Some testcases allow for optional commandline parameters but as of now
there is now way to provide such arguments to the runner script.
Add support to retrieve such optional command parameters fron environment
variables named so as to include the all-uppercase test executable name,
sanitized substituting any non-acceptable varname characters with "_",
following the pattern:
KSELFTEST_<UPPERCASE_SANITIZED_TEST_NAME>_ARGS="options"
Optional command parameters support is not available if 'tr' is not
installed on the test system.
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Build fix (workaround) for clang.
- Fix a /proc/kcore based slabinfo script broken by struct slab changes
in 5.17-rc1.
* tag 'slab-for-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
tools/cgroup/slabinfo: update to work with struct slab
slab: remove __alloc_size attribute from __kmalloc_track_caller
|
|
AMD P-State kernel module is using the fine grain frequency instead of
acpi hardware pstate. So add a function to print performance and
frequency values.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The print_speed can be as a common function, and expose it into misc
helper header. Then it can be used on other helper files as well.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The legacy ACPI hardware P-States function has 3 P-States on ACPI table,
the CPU frequency only can be switched between the 3 P-States. While the
processor supports the boost state, it will have another boost state
that the frequency can be higher than P0 state, and the state can be
decoded by the function of decode_pstates() and read by
amd_pci_get_num_boost_states().
However, the new AMD P-State function is different than legacy ACPI
hardware P-State on AMD processors. That has a finer grain frequency
range between the highest and lowest frequency. And boost frequency is
actually the frequency which is mapped on highest performance ratio. The
similar previous P0 frequency is mapped on nominal performance ratio.
If the highest performance on the processor is higher than nominal
performance, then we think the current processor supports the boost
state. And it uses amd_pstate_boost_init() to initialize boost for AMD
P-State function.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Introduce the marco definitions and access helper function for
AMD P-State sysfs interfaces such as each performance goals and frequency
levels in amd helper file. They will be used to read the sysfs attribute
from AMD P-State cpufreq driver for cpupower utilities.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Kernel ACPI subsytem introduced the sysfs attributes for acpi cppc
library in below path:
/sys/devices/system/cpu/cpuX/acpi_cppc/
And these attributes will be used for AMD P-State driver to provide some
performance and frequency values.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Expose the helper into cpufreq header, then cpufreq driver can use this
function to get the sysfs value if it has any specific sysfs interfaces.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
If kernel starts the AMD P-State module, the cpupower will initial the
capability flag as CPUPOWER_CAP_AMD_PSTATE. And once AMD P-State
capability is set, it won't need to set legacy ACPI relative
capabilities anymore.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The processor with AMD P-State function also supports legacy ACPI
hardware P-States feature as well. Once driver sets AMD P-State eanbled,
the processor will respond the finer grain AMD P-State feature instead of
legacy ACPI P-States. So it introduces the cpupower_amd_pstate_enabled()
to check whether the current kernel enables AMD P-State or AMD CPUFreq
module.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add AMD P-State capability flag in cpupower to indicate AMD new P-State
kernel module support on Ryzen processors.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
In SPE traces the 'weight' field can't be printed in 'perf script'
because the 'dummy:u' event doesn't have the WEIGHT attribute set.
Use evsel__do_check_stype(..) to check this field, as it's done with
other fields such as "phys_addr".
Before:
$ perf record -e arm_spe_0// -- sleep 1
$ perf script -F event,ip,weight
Samples for 'dummy:u' event do not have WEIGHT attribute set. Cannot print 'weight' field.
After:
$ perf script -F event,ip,weight
l1d-access: 12 ffffaf629d4cb320
tlb-access: 12 ffffaf629d4cb320
memory: 12 ffffaf629d4cb320
Fixes: b0fde9c6e291e528 ("perf arm-spe: Add SPE total latency as PERF_SAMPLE_WEIGHT")
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220221171707.62960-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
3915035282573c5e ("KVM: x86: SVM: move avic definitions from AMD's spec to svm.h")
Addressing these tools/perf build warnings:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
That makes the beautification scripts to pick some new entries:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2022-02-22 17:35:36.996271430 -0300
+++ after 2022-02-22 17:35:46.258503347 -0300
@@ -287,6 +287,7 @@
[0xc0010114 - x86_AMD_V_KVM_MSRs_offset] = "VM_CR",
[0xc0010115 - x86_AMD_V_KVM_MSRs_offset] = "VM_IGNNE",
[0xc0010117 - x86_AMD_V_KVM_MSRs_offset] = "VM_HSAVE_PA",
+ [0xc001011b - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SVM_AVIC_DOORBELL",
[0xc001011e - x86_AMD_V_KVM_MSRs_offset] = "AMD64_VM_PAGE_FLUSH",
[0xc001011f - x86_AMD_V_KVM_MSRs_offset] = "AMD64_VIRT_SPEC_CTRL",
[0xc0010130 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV_ES_GHCB",
$
And this gets rebuilt:
CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o
LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o
LD /tmp/build/perf/trace/beauty/perf-in.o
CC /tmp/build/perf/util/amd-sample-raw.o
LD /tmp/build/perf/util/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
Now one can trace systemwide asking to see backtraces to where those
MSRs are being read/written with:
# perf trace -e msr:*_msr/max-stack=32/ --filter="msr>=AMD64_SVM_AVIC_DOORBELL && msr<=AMD64_SEV_ES_GHCB"
^C#
If we use -v (verbose mode) we can see what it does behind the scenes:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=AMD64_SVM_AVIC_DOORBELL && msr<=AMD64_SEV_ES_GHCB"
Using CPUID AuthenticAMD-25-21-0
0xc001011b
0xc0010130
New filter for msr:read_msr: (msr>=0xc001011b && msr<=0xc0010130) && (common_pid != 1019953 && common_pid != 3629)
0xc001011b
0xc0010130
New filter for msr:write_msr: (msr>=0xc001011b && msr<=0xc0010130) && (common_pid != 1019953 && common_pid != 3629)
mmap size 528384B
^C#
Example with a frequent msr:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
Using CPUID AuthenticAMD-25-21-0
0x48
New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
0x48
New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
mmap size 528384B
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
futex_wait_queue_me ([kernel.kallsyms])
futex_wait ([kernel.kallsyms])
do_futex ([kernel.kallsyms])
__x64_sys_futex ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so)
0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule_idle ([kernel.kallsyms])
do_idle ([kernel.kallsyms])
cpu_startup_entry ([kernel.kallsyms])
secondary_startup_64_no_verify ([kernel.kallsyms])
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/YhVKxaft+z8rpOfy@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When perf_data__create_dir() fails, it calls close_dir(), but
perf_session__delete() also calls close_dir() and since dir.version and
dir.nr were initialized by perf_data__create_dir(), a double free occurs.
This patch moves the initialization of dir.version and dir.nr after
successful initialization of dir.files, that prevents double freeing.
This behavior is already implemented in perf_data__open_dir().
Fixes: 145520631130bd64 ("perf data: Add perf_data__(create_dir|close_dir) functions")
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220218152341.5197-2-alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now that all aliases are defined using SYM_FUNC_ALIAS(), remove the old
SYM_FUNC_{START,END}_ALIAS() macros.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220216162229.1076788-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now that we have SYM_FUNC_ALIAS() and SYM_FUNC_ALIAS_WEAK(), use those
to simplify the definition of function aliases across arch/x86.
For clarity, where there are multiple annotations such as
EXPORT_SYMBOL(), I've tried to keep annotations grouped by symbol. For
example, where a function has a name and an alias which are both
exported, this is organised as:
SYM_FUNC_START(func)
... asm insns ...
SYM_FUNC_END(func)
EXPORT_SYMBOL(func)
SYM_FUNC_ALIAS(alias, func)
EXPORT_SYMBOL(alias)
Where there are only aliases and no exports or other annotations, I have
not bothered with line spacing, e.g.
SYM_FUNC_START(func)
... asm insns ...
SYM_FUNC_END(func)
SYM_FUNC_ALIAS(alias, func)
The tools/perf/ copies of memset_64.S and memset_64.S are updated
likewise to avoid the build system complaining these are mismatched:
| Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
| diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
| Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S'
| diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220216162229.1076788-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently aliasing an asm function requires adding START and END
annotations for each name, as per Documentation/asm-annotations.rst:
SYM_FUNC_START_ALIAS(__memset)
SYM_FUNC_START(memset)
... asm insns ...
SYM_FUNC_END(memset)
SYM_FUNC_END_ALIAS(__memset)
This is more painful than necessary to maintain, especially where a
function has many aliases, some of which we may wish to define
conditionally. For example, arm64's memcpy/memmove implementation (which
uses some arch-specific SYM_*() helpers) has:
SYM_FUNC_START_ALIAS(__memmove)
SYM_FUNC_START_ALIAS_WEAK_PI(memmove)
SYM_FUNC_START_ALIAS(__memcpy)
SYM_FUNC_START_WEAK_PI(memcpy)
... asm insns ...
SYM_FUNC_END_PI(memcpy)
EXPORT_SYMBOL(memcpy)
SYM_FUNC_END_ALIAS(__memcpy)
EXPORT_SYMBOL(__memcpy)
SYM_FUNC_END_ALIAS_PI(memmove)
EXPORT_SYMBOL(memmove)
SYM_FUNC_END_ALIAS(__memmove)
EXPORT_SYMBOL(__memmove)
SYM_FUNC_START(name)
It would be much nicer if we could define the aliases *after* the
standard function definition. This would avoid the need to specify each
symbol name twice, and would make it easier to spot the canonical
function definition.
This patch adds new macros to allow us to do so, which allows the above
example to be rewritten more succinctly as:
SYM_FUNC_START(__pi_memcpy)
... asm insns ...
SYM_FUNC_END(__pi_memcpy)
SYM_FUNC_ALIAS(__memcpy, __pi_memcpy)
EXPORT_SYMBOL(__memcpy)
SYM_FUNC_ALIAS_WEAK(memcpy, __memcpy)
EXPORT_SYMBOL(memcpy)
SYM_FUNC_ALIAS(__pi_memmove, __pi_memcpy)
SYM_FUNC_ALIAS(__memmove, __pi_memmove)
EXPORT_SYMBOL(__memmove)
SYM_FUNC_ALIAS_WEAK(memmove, __memmove)
EXPORT_SYMBOL(memmove)
The reduction in duplication will also make it possible to replace some
uses of WEAK with more accurate Kconfig guards, e.g.
#ifndef CONFIG_KASAN
SYM_FUNC_ALIAS(memmove, __memmove)
EXPORT_SYMBOL(memmove)
#endif
... which should make it easier to ensure that symbols are neither used
nor overidden unexpectedly.
The existing SYM_FUNC_START_ALIAS() and SYM_FUNC_START_LOCAL_ALIAS() are
marked as deprecated, and will be removed once existing users are moved
over to the new scheme.
The tools/perf/ copy of linkage.h is updated to match. A subsequent
patch will depend upon this when updating the x86 asm annotations.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220216162229.1076788-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add KVM_CAP_PPC_AIL_MODE_3 to advertise the capability to set the AIL
resource mode to 3 with the H_SET_MODE hypercall. This capability
differs between processor types and KVM types (PR, HV, Nested HV), and
affects guest-visible behaviour.
QEMU will implement a cap-ail-mode-3 to control this behaviour[1], and
use the KVM CAP if available to determine KVM support[2].
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
New conflicts in sched/core due to the following upstream fixes:
44585f7bc0cb ("psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n")
a06247c6804f ("psi: Fix uaf issue when psi trigger is destroyed while being polled")
Conflicts:
include/linux/psi_types.h
kernel/sched/psi.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
After the introduction of the dedicated struct slab to describe slab
pages by commit d122019bf061 ("mm: Split slab into its own type") and
the following removal of the corresponding struct page's fields by
commit 07f910f9b729 ("mm: Remove slab from struct page") the
memcg_slabinfo tool broke. An attempt to run it produces a trace like
this:
Traceback (most recent call last):
File "/usr/bin/drgn", line 33, in <module>
sys.exit(load_entry_point('drgn==0.0.16', 'console_scripts', 'drgn')())
File "/usr/lib64/python3.9/site-packages/drgn/internal/cli.py", line 133, in main
runpy.run_path(args.script[0], init_globals=init_globals, run_name="__main__")
File "/usr/lib64/python3.9/runpy.py", line 268, in run_path
return _run_module_code(code, init_globals, run_name,
File "/usr/lib64/python3.9/runpy.py", line 97, in _run_module_code
_run_code(code, mod_globals, init_globals,
File "/usr/lib64/python3.9/runpy.py", line 87, in _run_code
exec(code, run_globals)
File "memcg_slabinfo.py", line 226, in <module>
main()
File "memcg_slabinfo.py", line 199, in main
cache = page.slab_cache
AttributeError: 'struct page' has no member 'slab_cache'
The problem can be fixed by explicitly casting struct page * to struct
slab * for slab pages. The tools works as expected with this fix, e.g.:
cred_jar 776 776 192 21 1 : tunables 0 0 0 : slabdata 547 547 0
kmalloc-cg-32 6 6 32 128 1 : tunables 0 0 0 : slabdata 9 9 0
files_cache 3 3 832 39 8 : tunables 0 0 0 : slabdata 8 8 0
kmalloc-cg-512 1 1 512 32 4 : tunables 0 0 0 : slabdata 10 10 0
task_struct 10 10 6720 4 8 : tunables 0 0 0 : slabdata 63 63 0
mm_struct 3 3 1664 19 8 : tunables 0 0 0 : slabdata 9 9 0
kmalloc-cg-16 1 1 16 256 1 : tunables 0 0 0 : slabdata 8 8 0
pde_opener 1 1 40 102 1 : tunables 0 0 0 : slabdata 8 8 0
anon_vma_chain 375 375 64 64 1 : tunables 0 0 0 : slabdata 81 81 0
radix_tree_node 3 3 584 28 4 : tunables 0 0 0 : slabdata 419 419 0
dentry 98 98 312 26 2 : tunables 0 0 0 : slabdata 1420 1420 0
btrfs_inode 3 3 2368 13 8 : tunables 0 0 0 : slabdata 730 730 0
signal_cache 3 3 1600 20 8 : tunables 0 0 0 : slabdata 17 17 0
sighand_cache 3 3 2240 14 8 : tunables 0 0 0 : slabdata 20 20 0
filp 90 90 512 32 4 : tunables 0 0 0 : slabdata 95 95 0
anon_vma 214 214 200 20 1 : tunables 0 0 0 : slabdata 162 162 0
kmalloc-cg-1k 1 1 1024 32 8 : tunables 0 0 0 : slabdata 22 22 0
pid 10 10 256 32 2 : tunables 0 0 0 : slabdata 14 14 0
kmalloc-cg-64 2 2 64 64 1 : tunables 0 0 0 : slabdata 8 8 0
kmalloc-cg-96 3 3 96 42 1 : tunables 0 0 0 : slabdata 8 8 0
sock_inode_cache 5 5 1408 23 8 : tunables 0 0 0 : slabdata 29 29 0
UNIX 7 7 1920 17 8 : tunables 0 0 0 : slabdata 21 21 0
inode_cache 36 36 1152 28 8 : tunables 0 0 0 : slabdata 680 680 0
proc_inode_cache 26 26 1224 26 8 : tunables 0 0 0 : slabdata 64 64 0
kmalloc-cg-2k 2 2 2048 16 8 : tunables 0 0 0 : slabdata 9 9 0
v2: change naming and count_partial()/count_free()/for_each_slab()
signatures to work with slabs, suggested by Matthew Wilcox
Fixes: 07f910f9b729 ("mm: Remove slab from struct page")
Reported-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Tested-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/linux-patches/Yg2cKKnIboNu7j+p@carbon.DHCP.thefacebook.com/
|
|
The RETPOLINE_AMD name is unfortunate since it isn't necessarily
AMD only, in fact Hygon also uses it. Furthermore it will likely be
sufficient for some Intel processors. Therefore rename the thing to
RETPOLINE_LFENCE to better describe what it is.
Add the spectre_v2=retpoline,lfence option as an alias to
spectre_v2=retpoline,amd to preserve existing setups. However, the output
of /sys/devices/system/cpu/vulnerabilities/spectre_v2 will be changed.
[ bp: Fix typos, massage. ]
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull mount_setattr test/doc fixes from Christian Brauner:
"This contains a fix for one of the selftests for the mount_setattr
syscall to create idmapped mounts, an entry for idmapped mounts for
maintainers, and missing kernel documentation for the helper we split
out some time ago to get and yield write access to a mount when
changing mount properties"
* tag 'fs.mount_setattr.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs: add kernel doc for mnt_{hold,unhold}_writers()
MAINTAINERS: add entry for idmapped mounts
tests: fix idmapped mount_setattr test
|
|
Since commit 2843ff6f36db ("mptcp: remote addresses fullmesh"), an
MPTCP client can attempt creating multiple MPJ subflow simultaneusly.
In such scenario the server, when syncookies are enabled, could end-up
accepting incoming MPJ syn even above the configured subflow limit, as
the such limit can be enforced in a reliable way only after the subflow
creation. In case of syncookie, only after the 3rd ack reception.
As a consequence the related self-tests case sporadically fails, as it
verify that the server always accept the expected number of MPJ syn.
Address the issues relaxing the MPJ syn number constrain. Note that the
check on the accepted number of MPJ 3rd ack still remains intact.
Fixes: 2843ff6f36db ("mptcp: remote addresses fullmesh")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The in kernel MPTCP PM implementation can process a single
incoming add address option at any given time. In the
mentioned test the server can surpass such limit. Let the
setup cope with that allowing a faster add_addr retransmission.
Fixes: a88c9e496937 ("mptcp: do not block subflows creation on errors")
Fixes: f7efc7771eac ("mptcp: drop argument port from mptcp_pm_announce_addr")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/254
Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mentioned test has to wait for a subflow creation failure.
The current code looks for TCP sockets in TW state and sometimes
misses the relevant event. Switch to a more stable check, looking
for the associated mib counter.
Fixes: 46e967d187ed ("selftests: mptcp: add tests for subflow creation failure")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/257
Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of waiting for an arbitrary amount of time for the MPTCP
MP_CAPABLE handshake to complete, explicitly wait for the relevant
socket to enter into the established status.
Additionally let the data transfer application use the slowest
transfer mode available (-r), to cope with very slow host, or
high jitter caused by hosting VMs.
Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/258
Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 'perf record' and 'perf stat' commands have supported the option
'-C/--cpus' to count or collect only on the list of CPUs provided.
Commit 1d3351e631fc34d7 ("perf tools: Enable on a list of CPUs for
hybrid") add it to be supported for hybrid. For hybrid support, it
checks the cpu list are available on hybrid PMU. But when we test only
uncore events(or events not in cpu_core and cpu_atom), there is a bug:
Before:
# perf stat -C0 -e uncore_clock/clockticks/ sleep 1
failed to use cpu list 0
In this case, for uncore event, its pmu_name is not cpu_core or
cpu_atom, so in evlist__fix_hybrid_cpus, perf_pmu__find_hybrid_pmu
should return NULL,both events_nr and unmatched_count should be 0 ,then
the cpu list check function evlist__fix_hybrid_cpus return -1 and the
error "failed to use cpu list 0" will happen. Bypass "events_nr=0" case
then the issue is fixed.
After:
# perf stat -C0 -e uncore_clock/clockticks/ sleep 1
Performance counter stats for 'CPU(s) 0':
195,476,873 uncore_clock/clockticks/
1.004518677 seconds time elapsed
When testing with at least one core event and uncore events, it has no
issue.
# perf stat -C0 -e cpu_core/cpu-cycles/,uncore_clock/clockticks/ sleep 1
Performance counter stats for 'CPU(s) 0':
5,993,774 cpu_core/cpu-cycles/
301,025,912 uncore_clock/clockticks/
1.003964934 seconds time elapsed
Fixes: 1d3351e631fc34d7 ("perf tools: Enable on a list of CPUs for hybrid")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: alexander.shishkin@intel.com
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220218093127.1844241-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Skip the Sigtrap test for arm + arm64, same as was done for s390 in
commit a840974e96fd ("perf test: Test 73 Sig_trap fails on s390"). For
this, reuse BP_SIGNAL_IS_SUPPORTED - meaning that the arch can use BP to
generate signals - instead of BP_ACCOUNT_IS_SUPPORTED, which is
appropriate.
As described by Will at [0], in the test we get stuck in a loop of
handling the HW breakpoint exception and never making progress. GDB
handles this by stepping over the faulting instruction, but with perf
the kernel is expected to handle the step (which it doesn't for arm).
Dmitry made an attempt to get this work, also mentioned in the same
thread as [0], which was appreciated. But the best thing to do is skip
the test for now.
[0] https://lore.kernel.org/linux-perf-users/20220118124343.GC98966@leoy-ThinkPad-X240s/T/#m13b06c39d2a5100d340f009435df6f4d8ee57b5a
Fixes: 5504f67944484495 ("perf test sigtrap: Add basic stress test for sigtrap handling")
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Marco Elver <elver@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@armlinux.org.uk
Link: https://lore.kernel.org/r/1645176813-202756-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to ftrace, exec, and seccomp tests build, run-time and install
bugs. These bugs are in the way of running the tests"
* tag 'linux-kselftest-fixes-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Do not trace do_softirq because of PREEMPT_RT
selftests/seccomp: Fix seccomp failure by adding missing headers
selftests/exec: Add non-regular to TEST_GEN_PROGS
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2022-02-17
We've added 8 non-merge commits during the last 7 day(s) which contain
a total of 8 files changed, 119 insertions(+), 15 deletions(-).
The main changes are:
1) Add schedule points in map batch ops, from Eric.
2) Fix bpf_msg_push_data with len 0, from Felix.
3) Fix crash due to incorrect copy_map_value, from Kumar.
4) Fix crash due to out of bounds access into reg2btf_ids, from Kumar.
5) Fix a bpf_timer initialization issue with clang, from Yonghong.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add schedule points in batch ops
bpf: Fix crash due to out of bounds access into reg2btf_ids.
selftests: bpf: Check bpf_msg_push_data return value
bpf: Fix a bpf_timer initialization issue
bpf: Emit bpf_timer in vmlinux BTF
selftests/bpf: Add test for bpf_timer overwriting crash
bpf: Fix crash due to incorrect copy_map_value
bpf: Do not try bpf_msg_push_data with len 0
====================
Link: https://lore.kernel.org/r/20220217190000.37925-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
CC can have multiple sub-strings like "ccache gcc". For check_cc.sh,
CC needs to be treated like one argument. Put double quotes around it to
make CC one string and hence one argument.
Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220214184109.3739179-3-usama.anjum@collabora.com
|
|
Add check to test if CC has a string. CC can have multiple sub-strings
like "ccache gcc". Erorr pops up if it is treated as single string and
double quotes are used around it. This can be fixed by removing the
quotes and not treating CC as a single string.
Fixes: e9886ace222e ("selftests, x86: Rework x86 target architecture detection")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220214184109.3739179-2-usama.anjum@collabora.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
Current release - regressions:
- dsa: lantiq_gswip: fix use after free in gswip_remove()
- smc: avoid overwriting the copies of clcsock callback functions
Current release - new code bugs:
- iwlwifi:
- fix use-after-free when no FW is present
- mei: fix the pskb_may_pull check in ipv4
- mei: retry mapping the shared area
- mvm: don't feed the hardware RFKILL into iwlmei
Previous releases - regressions:
- ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()
- tipc: fix wrong publisher node address in link publications
- iwlwifi: mvm: don't send SAR GEO command for 3160 devices, avoid FW
assertion
- bgmac: make idm and nicpm resource optional again
- atl1c: fix tx timeout after link flap
Previous releases - always broken:
- vsock: remove vsock from connected table when connect is
interrupted by a signal
- ping: change destination interface checks to match raw sockets
- crypto: af_alg - get rid of alg_memory_allocated to avoid confusing
semantics (and null-deref) after SO_RESERVE_MEM was added
- ipv6: make exclusive flowlabel checks per-netns
- bonding: force carrier update when releasing slave
- sched: limit TC_ACT_REPEAT loops
- bridge: multicast: notify switchdev driver whenever MC processing
gets disabled because of max entries reached
- wifi: brcmfmac: fix crash in brcm_alt_fw_path when WLAN not found
- iwlwifi: fix locking when "HW not ready"
- phy: mediatek: remove PHY mode check on MT7531
- dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN
- dsa: lan9303:
- fix polarity of reset during probe
- fix accelerated VLAN handling"
* tag 'net-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
bonding: force carrier update when releasing slave
nfp: flower: netdev offload check for ip6gretap
ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt
ipv4: fix data races in fib_alias_hw_flags_set
net: dsa: lan9303: add VLAN IDs to master device
net: dsa: lan9303: handle hwaccel VLAN tags
vsock: remove vsock from connected table when connect is interrupted by a signal
Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname"
ping: fix the dif and sdif check in ping_lookup
net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
net: sched: limit TC_ACT_REPEAT loops
tipc: fix wrong notification node addresses
net: dsa: lantiq_gswip: fix use after free in gswip_remove()
ipv6: per-netns exclusive flowlabel checks
net: bridge: multicast: notify switchdev driver whenever MC processing gets disabled
CDC-NCM: avoid overflow in sanity checking
mctp: fix use after free
net: mscc: ocelot: fix use-after-free in ocelot_vlan_del()
bonding: fix data-races around agg_select_timer
dpaa2-eth: Initialize mutex used in one step timestamping path
...
|
