summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2022-02-11tests: fix idmapped mount_setattr testChristian Brauner1-2/+2
The test treated zero as a successful run when it really should treat non-zero as a successful run. A mount's idmapping can't change once it has been attached to the filesystem. Link: https://lore.kernel.org/r/20220203131411.3093040-2-brauner@kernel.org Fixes: 01eadc8dd96d ("tests: add mount_setattr() selftests") Cc: Seth Forshee <seth.forshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <brauner@kernel.org>
2022-02-11bpftool: Update versioning scheme, align on libbpf's version numberQuentin Monnet2-4/+23
Since the notion of versions was introduced for bpftool, it has been following the version number of the kernel (using the version number corresponding to the tree in which bpftool's sources are located). The rationale was that bpftool's features are loosely tied to BPF features in the kernel, and that we could defer versioning to the kernel repository itself. But this versioning scheme is confusing today, because a bpftool binary should be able to work with both older and newer kernels, even if some of its recent features won't be available on older systems. Furthermore, if bpftool is ported to other systems in the future, keeping a Linux-based version number is not a good option. Looking at other options, we could either have a totally independent scheme for bpftool, or we could align it on libbpf's version number (with an offset on the major version number, to avoid going backwards). The latter comes with a few drawbacks: - We may want bpftool releases in-between two libbpf versions. We can always append pre-release numbers to distinguish versions, although those won't look as "official" as something with a proper release number. But at the same time, having bpftool with version numbers that look "official" hasn't really been an issue so far. - If no new feature lands in bpftool for some time, we may move from e.g. 6.7.0 to 6.8.0 when libbpf levels up and have two different versions which are in fact the same. - Following libbpf's versioning scheme sounds better than kernel's, but ultimately it doesn't make too much sense either, because even though bpftool uses the lib a lot, its behaviour is not that much conditioned by the internal evolution of the library (or by new APIs that it may not use). Having an independent versioning scheme solves the above, but at the cost of heavier maintenance. Developers will likely forget to increase the numbers when adding features or bug fixes, and we would take the risk of having to send occasional "catch-up" patches just to update the version number. Based on these considerations, this patch aligns bpftool's version number on libbpf's. This is not a perfect solution, but 1) it's certainly an improvement over the current scheme, 2) the issues raised above are all minor at the moment, and 3) we can still move to an independent scheme in the future if we realise we need it. Given that libbpf is currently at version 0.7.0, and bpftool, before this patch, was at 5.16, we use an offset of 6 for the major version, bumping bpftool to 6.7.0. Libbpf does not export its patch number; leave bpftool's patch number at 0 for now. It remains possible to manually override the version number by setting BPFTOOL_VERSION when calling make. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220210104237.11649-3-quentin@isovalent.com
2022-02-11bpftool: Add libbpf's version number to "bpftool version" outputQuentin Monnet2-6/+11
To help users check what version of libbpf is being used with bpftool, print the number along with bpftool's own version number. Output: $ ./bpftool version ./bpftool v5.16.0 using libbpf v0.7 features: libbfd, libbpf_strict, skeletons $ ./bpftool version --json --pretty { "version": "5.16.0", "libbpf_version": "0.7", "features": { "libbfd": true, "libbpf_strict": true, "skeletons": true } } Note that libbpf does not expose its patch number. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220210104237.11649-2-quentin@isovalent.com
2022-02-11user_events: Add self-test for validator boundariesBeau Belgrave1-0/+65
Tests to ensure validator boundary cases are working correctly within close and far bounds. Ensures __data_loc and __rel_loc strings are null terminated and within range. Ensures min size checks work as expected. Link: https://lkml.kernel.org/r/20220118204326.2169-11-beaub@linux.microsoft.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-02-11user_events: Add self-test for perf_event integrationBeau Belgrave2-1/+169
Tests perf can be attached to and written out correctly. Ensures attach updates status bits in user programs. Link: https://lkml.kernel.org/r/20220118204326.2169-10-beaub@linux.microsoft.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-02-11user_events: Add self-test for dynamic_events integrationBeau Belgrave2-1/+131
Tests matching deletes, creation of basic and complex types. Ensures common patterns work correctly when interacting with dynamic_events file. Link: https://lkml.kernel.org/r/20220118204326.2169-9-beaub@linux.microsoft.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-02-11user_events: Add self-test for ftrace integrationBeau Belgrave3-0/+397
Tests basic functionality of registering/deregistering, status and writing data out via ftrace mechanisms within user_events. Link: https://lkml.kernel.org/r/20220118204326.2169-8-beaub@linux.microsoft.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-02-11selftest/bpf: Check invalid length in test_xdp_update_fragsLorenzo Bianconi1-1/+37
Update test_xdp_update_frags adding a test for a buffer size set to (MAX_SKB_FRAGS + 2) * PAGE_SIZE. The kernel is supposed to return -ENOMEM. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/3e4afa0ee4976854b2f0296998fe6754a80b62e5.1644366736.git.lorenzo@kernel.org
2022-02-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski29-72/+248
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-11Merge tag 'net-5.17-rc4' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter and can. Current release - new code bugs: - sparx5: fix get_stat64 out-of-bound access and crash - smc: fix netdev ref tracker misuse Previous releases - regressions: - eth: ixgbevf: require large buffers for build_skb on 82599VF, avoid overflows - eth: ocelot: fix all IP traffic getting trapped to CPU with PTP over IP - bonding: fix rare link activation misses in 802.3ad mode Previous releases - always broken: - tcp: fix tcp sock mem accounting in zero-copy corner cases - remove the cached dst when uncloning an skb dst and its metadata, since we only have one ref it'd lead to an UaF - netfilter: - conntrack: don't refresh sctp entries in closed state - conntrack: re-init state for retransmitted syn-ack, avoid connection establishment getting stuck with strange stacks - ctnetlink: disable helper autoassign, avoid it getting lost - nft_payload: don't allow transport header access for fragments - dsa: fix use of devres for mdio throughout drivers - eth: amd-xgbe: disable interrupts during pci removal - eth: dpaa2-eth: unregister netdev before disconnecting the PHY - eth: ice: fix IPIP and SIT TSO offload" * tag 'net-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits) net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregister net: mscc: ocelot: fix mutex lock error during ethtool stats read ice: Avoid RTNL lock when re-creating auxiliary device ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler ice: fix IPIP and SIT TSO offload ice: fix an error code in ice_cfg_phy_fec() net: mpls: Fix GCC 12 warning dpaa2-eth: unregister the netdev before disconnecting from the PHY skbuff: cleanup double word in comment net: macb: Align the dma and coherent dma masks mptcp: netlink: process IPv6 addrs in creating listening sockets selftests: mptcp: add missing join check net: usb: qmi_wwan: Add support for Dell DW5829e vlan: move dev_put into vlan_dev_uninit vlan: introduce vlan_dev_free_egress_priority ax25: fix UAF bugs of net_device caused by rebinding operation net: dsa: fix panic when DSA master device unbinds on shutdown net: amd-xgbe: disable interrupts during pci removal tipc: rate limit warning for received illegal binding update net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE ...
2022-02-11Merge tag 'linux-kselftest-fixes-5.17-rc4' of ↵Linus Torvalds6-15/+43
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Build and run-time fixes to pidfd, clone3, and ir tests" * tag 'linux-kselftest-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ir: fix build with ancient kernel headers selftests: fixup build warnings in pidfd / clone3 tests pidfd: fix test failure due to stack overflow on some arches
2022-02-11Merge tag 'linux-kselftest-kunit-fixes-5.17-rc4' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fixes from Shuah Khan: "Fixes to the test and usage documentation" * tag 'linux-kselftest-kunit-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: Documentation: KUnit: Fix usage bug kunit: fix missing f in f-string in run_checks.py
2022-02-11selftests: netfilter: disable rp_filter on routerHangbin Liu1-0/+1
Some distros may enable rp_filter by default. After ns1 change addr to 10.0.2.99 and set default router to 10.0.2.1, while the connected router address is still 10.0.1.1. The router will not reply the arp request from ns1. Fix it by setting the router's veth0 rp_filter to 0. Before the fix: # ./nft_fib.sh PASS: fib expression did not cause unwanted packet drops Netns nsrouter-HQkDORO2 fib counter doesn't match expected packet count of 1 for 1.1.1.1 table inet filter { chain prerouting { type filter hook prerouting priority filter; policy accept; ip daddr 1.1.1.1 fib saddr . iif oif missing counter packets 0 bytes 0 drop ip6 daddr 1c3::c01d fib saddr . iif oif missing counter packets 0 bytes 0 drop } } After the fix: # ./nft_fib.sh PASS: fib expression did not cause unwanted packet drops PASS: fib expression did drop packets for 1.1.1.1 PASS: fib expression did drop packets for 1c3::c01d Fixes: 82944421243e ("selftests: netfilter: add fib test case") Signed-off-by: Yi Chen <yiche@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-02-11bpftool: Generalize light skeleton generation.Alexei Starovoitov1-19/+20
Generealize light skeleton by hiding mmap details in skel_internal.h In this form generated lskel.h is usable both by user space and by the kernel. Note that previously #include <bpf/bpf.h> was in *.lskel.h file. To avoid #ifdef-s in a generated lskel.h the include of bpf.h is moved to skel_internal.h, but skel_internal.h is also used by gen_loader.c which is part of libbpf. Therefore skel_internal.h does #include "bpf.h" in case of user space, so gen_loader.c and lskel.h have necessary definitions. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220209232001.27490-4-alexei.starovoitov@gmail.com
2022-02-11libbpf: Prepare light skeleton for the kernel.Alexei Starovoitov2-21/+179
Prepare light skeleton to be used in the kernel module and in the user space. The look and feel of lskel.h is mostly the same with the difference that for user space the skel->rodata is the same pointer before and after skel_load operation, while in the kernel the skel->rodata after skel_open and the skel->rodata after skel_load are different pointers. Typical usage of skeleton remains the same for kernel and user space: skel = my_bpf__open(); skel->rodata->my_global_var = init_val; err = my_bpf__load(skel); err = my_bpf__attach(skel); // access skel->rodata->my_global_var; // access skel->bss->another_var; Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220209232001.27490-3-alexei.starovoitov@gmail.com
2022-02-10KVM: selftests: nSVM: Add enlightened MSR-Bitmap selftestVitaly Kuznetsov3-0/+177
Introduce a new test for Hyper-V nSVM extensions (Hyper-V on KVM) and add a test for enlightened MSR-Bitmap feature: - Intercept access to MSR_FS_BASE in L1 and check that this works with enlightened MSR-Bitmap disabled. - Enabled enlightened MSR-Bitmap and check that the intercept still works as expected. - Intercept access to MSR_GS_BASE but don't clear the corresponding bit from clean fields mask, KVM is supposed to skip updating MSR-Bitmap02 and thus the consequent access to the MSR from L2 will not get intercepted. - Finally, clear the corresponding bit from clean fields mask and check that access to MSR_GS_BASE is now intercepted. The test works with the assumption, that access to MSR_FS_BASE/MSR_GS_BASE is not intercepted for L1. If this ever becomes not true the test will fail as nested_svm_exit_handled_msr() always checks L1's MSR-Bitmap for L2 irrespective of clean fields. The behavior is correct as enlightened MSR-Bitmap feature is just an optimization, KVM is not obliged to ignore updates when the corresponding bit in clean fields stays clear. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220203104620.277031-7-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-10KVM: selftests: nSVM: Update 'struct vmcb_control_area' definitionVitaly Kuznetsov1-1/+8
There's a copy of 'struct vmcb_control_area' definition in KVM selftests, update it to allow testing of the newly introduced features. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220203104620.277031-6-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-10KVM: selftests: nSVM: Set up MSR-Bitmap for SVM guestsVitaly Kuznetsov2-0/+11
Similar to VMX, allocate memory for MSR-Bitmap and fill in 'msrpm_base_pa' in VMCB. To use it, tests will need to set INTERCEPT_MSR_PROT interception along with the required bits in the MSR-Bitmap. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220203104620.277031-5-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-10KVM: selftests: nVMX: Add enlightened MSR-Bitmap selftestVitaly Kuznetsov1-0/+59
Introduce a test for enlightened MSR-Bitmap feature (Hyper-V on KVM): - Intercept access to MSR_FS_BASE in L1 and check that this works with enlightened MSR-Bitmap disabled. - Enabled enlightened MSR-Bitmap and check that the intercept still works as expected. - Intercept access to MSR_GS_BASE but don't clear the corresponding bit from 'hv_clean_fields', KVM is supposed to skip updating MSR-Bitmap02 and thus the consequent access to the MSR from L2 will not get intercepted. - Finally, clear the corresponding bit from 'hv_clean_fields' and check that access to MSR_GS_BASE is now intercepted. The test works with the assumption, that access to MSR_FS_BASE/MSR_GS_BASE is not intercepted for L1. If this ever becomes not true the test will fail as nested_vmx_exit_handled_msr() always checks L1's MSR-Bitmap for L2 irrespective of 'hv_clean_fields'. The behavior is correct as enlightened MSR-Bitmap feature is just an optimization, KVM is not obliged to ignore updates when the corresponding bit in 'hv_clean_fields' stays clear. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220203104620.277031-4-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-10KVM: selftests: nVMX: Properly deal with 'hv_clean_fields'Vitaly Kuznetsov2-3/+152
Instead of just resetting 'hv_clean_fields' to 0 on every enlightened vmresume, do the expected cleaning of the corresponding bit on enlightened vmwrite. Avoid direct access to 'current_evmcs' from evmcs_test to support the change. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220203104620.277031-3-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-10KVM: selftests: Adapt hyperv_cpuid test to the newly introduced Enlightened ↵Vitaly Kuznetsov1-12/+17
MSR-Bitmap CPUID 0x40000000.EAX is now always present as it has Enlightened MSR-Bitmap feature bit set. Adapt the test accordingly. Opportunistically add a check for the supported eVMCS version range. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220203104620.277031-2-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-10KVM: selftests: Add an option to disable MANUAL_PROTECT_ENABLE and INITIALLY_SETDavid Matlack1-2/+11
Add an option to dirty_log_perf_test.c to disable KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE and KVM_DIRTY_LOG_INITIALLY_SET so the legacy dirty logging code path can be tested. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20220119230739.2234394-19-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-10selftests: netfilter: synproxy test requires nf_conntrackPablo Neira Ayuso1-0/+2
Otherwise, this test does not find the sysctl entry in place: sysctl: cannot stat /proc/sys/net/netfilter/nf_conntrack_tcp_loose: No such file or directory iperf3: error - unable to send control message: Bad file descriptor FAIL: iperf3 returned an error Fixes: 7152303cbec4 ("selftests: netfilter: add synproxy test") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-02-10selftests: net: test standard socket cmsgs across UDP and ICMP socketsJakub Kicinski2-0/+84
Test TIMESTAMPING and TXTIME across UDP / ICMP and IP versions. Before ICMPv6 support: # ./tools/testing/selftests/net/cmsg_time.sh Case ICMPv6 - ts cnt returned '0', expected '2' Case ICMPv6 - ts0 SCHED returned '', expected 'OK' Case ICMPv6 - ts0 SND returned '', expected 'OK' Case ICMPv6 - TXTIME abs returned '', expected 'OK' Case ICMPv6 - TXTIME rel returned '', expected 'OK' FAIL - 5/36 cases failed After: # ./tools/testing/selftests/net/cmsg_time.sh OK Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10selftests: net: cmsg_sender: support Tx timestampingJakub Kicinski1-1/+122
Support requesting Tx timestamps: $ ./cmsg_sender -p i -t -4 $tgt 123 -d 1000 SCHED ts0 61us SND ts0 1071us Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10selftests: net: cmsg_sender: support setting SO_TXTIMEJakub Kicinski1-3/+46
Add ability to send delayed packets. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10selftests: net: cmsg_so_mark: test with SO_MARK set by setsockoptJakub Kicinski2-11/+31
Test if setting SO_MARK with setsockopt works and if cmsg takes precedence over it. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10selftests: net: cmsg_so_mark: test ICMP and RAW socketsJakub Kicinski1-8/+16
Use new capabilities of cmsg_sender to test ICMP and RAW sockets, previously only UDP was tested. Before SO_MARK support was added to ICMPv6: # ./cmsg_so_mark.sh Case ICMP rejection returned 0, expected 1 FAIL - 1/12 cases failed After: # ./cmsg_so_mark.sh OK Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10selftests: net: cmsg_sender: support icmp and raw socketsJakub Kicinski1-9/+55
Support sending fake ICMP(v6) messages and UDP via RAW sockets. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10selftests: net: make cmsg_so_mark ready for more optionsJakub Kicinski2-26/+117
Parametrize the code so that it can support UDP and ICMP sockets in the future, and more cmsg types. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10selftests: net: rename cmsg_so_markJakub Kicinski4-6/+6
Rename the file in prep for generalization. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10selftests: mptcp: add missing join checkMatthieu Baerts1-0/+1
This function also writes the name of the test with its ID, making clear a new test has been executed. Without that, the ADD_ADDR results from this test was appended at the end of the previous test causing confusions. Especially when the second test was failing, we had: 17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] add[fail] got 2 ADD_ADDR[s] expected 3 In fact, this 17th test was OK but not the 18th one. Now we have: 17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] 18 signal addresses race test syn[fail] got 2 JOIN[s] syn expected 3 - synack[fail] got 2 JOIN[s] synack expected - ack[fail] got 2 JOIN[s] ack expected 3 add[fail] got 2 ADD_ADDR[s] expected 3 Fixes: 33c563ad28e3 ("selftests: mptcp: add_addr and echo race test") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-10Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski135-1310/+2290
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-02-09 We've added 126 non-merge commits during the last 16 day(s) which contain a total of 201 files changed, 4049 insertions(+), 2215 deletions(-). The main changes are: 1) Add custom BPF allocator for JITs that pack multiple programs into a huge page to reduce iTLB pressure, from Song Liu. 2) Add __user tagging support in vmlinux BTF and utilize it from BPF verifier when generating loads, from Yonghong Song. 3) Add per-socket fast path check guarding from cgroup/BPF overhead when used by only some sockets, from Pavel Begunkov. 4) Continued libbpf deprecation work of APIs/features and removal of their usage from samples, selftests, libbpf & bpftool, from Andrii Nakryiko and various others. 5) Improve BPF instruction set documentation by adding byte swap instructions and cleaning up load/store section, from Christoph Hellwig. 6) Switch BPF preload infra to light skeleton and remove libbpf dependency from it, from Alexei Starovoitov. 7) Fix architecture-agnostic macros in libbpf for accessing syscall arguments from BPF progs for non-x86 architectures, from Ilya Leoshkevich. 8) Rework port members in struct bpf_sk_lookup and struct bpf_sock to be of 16-bit field with anonymous zero padding, from Jakub Sitnicki. 9) Add new bpf_copy_from_user_task() helper to read memory from a different task than current. Add ability to create sleepable BPF iterator progs, from Kenny Yu. 10) Implement XSK batching for ice's zero-copy driver used by AF_XDP and utilize TX batching API from XSK buffer pool, from Maciej Fijalkowski. 11) Generate temporary netns names for BPF selftests to avoid naming collisions, from Hangbin Liu. 12) Implement bpf_core_types_are_compat() with limited recursion for in-kernel usage, from Matteo Croce. 13) Simplify pahole version detection and finally enable CONFIG_DEBUG_INFO_DWARF5 to be selected with CONFIG_DEBUG_INFO_BTF, from Nathan Chancellor. 14) Misc minor fixes to libbpf and selftests from various folks. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (126 commits) selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookup bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide libbpf: Fix compilation warning due to mismatched printf format selftests/bpf: Test BPF_KPROBE_SYSCALL macro libbpf: Add BPF_KPROBE_SYSCALL macro libbpf: Fix accessing the first syscall argument on s390 libbpf: Fix accessing the first syscall argument on arm64 libbpf: Allow overriding PT_REGS_PARM1{_CORE}_SYSCALL selftests/bpf: Skip test_bpf_syscall_macro's syscall_arg1 on arm64 and s390 libbpf: Fix accessing syscall arguments on riscv libbpf: Fix riscv register names libbpf: Fix accessing syscall arguments on powerpc selftests/bpf: Use PT_REGS_SYSCALL_REGS in bpf_syscall_macro libbpf: Add PT_REGS_SYSCALL_REGS macro selftests/bpf: Fix an endianness issue in bpf_syscall_macro test bpf: Fix bpf_prog_pack build HPAGE_PMD_SIZE bpf: Fix leftover header->pages in sparc and powerpc code. libbpf: Fix signedness bug in btf_dump_array_data() selftests/bpf: Do not export subtest as standalone test bpf, x86_64: Fail gracefully on bpf_jit_binary_pack_finalize failures ... ==================== Link: https://lore.kernel.org/r/20220209210050.8425-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-09selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookupJakub Sitnicki2-1/+8
Extend the context access tests for sk_lookup prog to cover the surprising case of a 4-byte load from the remote_port field, where the expected value is actually shifted by 16 bits. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220209184333.654927-3-jakub@cloudflare.com
2022-02-09libbpf: Fix compilation warning due to mismatched printf formatAndrii Nakryiko1-1/+2
On ppc64le architecture __s64 is long int and requires %ld. Cast to ssize_t and use %zd to avoid architecture-specific specifiers. Fixes: 4172843ed4a3 ("libbpf: Fix signedness bug in btf_dump_array_data()") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220209063909.1268319-1-andrii@kernel.org
2022-02-09selftests: netfilter: fix exit value for nft_concat_rangeHangbin Liu1-1/+1
When the nft_concat_range test failed, it exit 1 in the code specifically. But when part of, or all of the test passed, it will failed the [ ${passed} -eq 0 ] check and thus exit with 1, which is the same exit value with failure result. Fix it by exit 0 when passed is not 0. Fixes: 611973c1e06f ("selftests: netfilter: Introduce tests for sets with range concatenation") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-02-09selftests: netfilter: add synproxy testFlorian Westphal2-1/+116
Simple test for synproxy feature, iperf3 should be intercepted by synproxy netns, but connection should still succeed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-02-09selftests/bpf: Test BPF_KPROBE_SYSCALL macroHengqi Chen2-0/+29
Add tests for the newly added BPF_KPROBE_SYSCALL macro. Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220207143134.2977852-3-hengqi.chen@gmail.com
2022-02-09libbpf: Add BPF_KPROBE_SYSCALL macroHengqi Chen1-0/+35
Add syscall-specific variant of BPF_KPROBE named BPF_KPROBE_SYSCALL ([0]). The new macro hides the underlying way of getting syscall input arguments. With the new macro, the following code: SEC("kprobe/__x64_sys_close") int BPF_KPROBE(do_sys_close, struct pt_regs *regs) { int fd; fd = PT_REGS_PARM1_CORE(regs); /* do something with fd */ } can be written as: SEC("kprobe/__x64_sys_close") int BPF_KPROBE_SYSCALL(do_sys_close, int fd) { /* do something with fd */ } [0] Closes: https://github.com/libbpf/libbpf/issues/425 Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220207143134.2977852-2-hengqi.chen@gmail.com
2022-02-09libbpf: Fix accessing the first syscall argument on s390Ilya Leoshkevich1-0/+6
On s390, the first syscall argument should be accessed via orig_gpr2 (see arch/s390/include/asm/syscall.h). Currently gpr[2] is used instead, leading to bpf_syscall_macro test failure. orig_gpr2 cannot be added to user_pt_regs, since its layout is a part of the ABI. Therefore provide access to it only through PT_REGS_PARM1_CORE_SYSCALL() by using a struct pt_regs flavor. Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220209021745.2215452-11-iii@linux.ibm.com
2022-02-09libbpf: Fix accessing the first syscall argument on arm64Ilya Leoshkevich1-0/+6
On arm64, the first syscall argument should be accessed via orig_x0 (see arch/arm64/include/asm/syscall.h). Currently regs[0] is used instead, leading to bpf_syscall_macro test failure. orig_x0 cannot be added to struct user_pt_regs, since its layout is a part of the ABI. Therefore provide access to it only through PT_REGS_PARM1_CORE_SYSCALL() by using a struct pt_regs flavor. Reported-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220209021745.2215452-10-iii@linux.ibm.com
2022-02-09libbpf: Allow overriding PT_REGS_PARM1{_CORE}_SYSCALLIlya Leoshkevich1-8/+12
arm64 and s390 need a special way to access the first syscall argument. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220209021745.2215452-9-iii@linux.ibm.com
2022-02-09selftests/bpf: Skip test_bpf_syscall_macro's syscall_arg1 on arm64 and s390Ilya Leoshkevich2-1/+7
These architectures can provide access to the first syscall argument only through PT_REGS_PARM1_CORE_SYSCALL(). Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220209021745.2215452-8-iii@linux.ibm.com
2022-02-09libbpf: Fix accessing syscall arguments on riscvIlya Leoshkevich1-0/+2
riscv does not select ARCH_HAS_SYSCALL_WRAPPER, so its syscall handlers take "unpacked" syscall arguments. Indicate this to libbpf using PT_REGS_SYSCALL_REGS macro. Reported-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220209021745.2215452-7-iii@linux.ibm.com
2022-02-09libbpf: Fix riscv register namesIlya Leoshkevich1-2/+2
riscv registers are accessed via struct user_regs_struct, not struct pt_regs. The program counter member in this struct is called pc, not epc. The frame pointer is called s0, not fp. Fixes: 3cc31d794097 ("libbpf: Normalize PT_REGS_xxx() macro definitions") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220209021745.2215452-6-iii@linux.ibm.com
2022-02-09libbpf: Fix accessing syscall arguments on powerpcIlya Leoshkevich1-0/+2
powerpc does not select ARCH_HAS_SYSCALL_WRAPPER, so its syscall handlers take "unpacked" syscall arguments. Indicate this to libbpf using PT_REGS_SYSCALL_REGS macro. Reported-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Link: https://lore.kernel.org/bpf/20220209021745.2215452-5-iii@linux.ibm.com
2022-02-09selftests/bpf: Use PT_REGS_SYSCALL_REGS in bpf_syscall_macroIlya Leoshkevich1-1/+1
Ensure that PT_REGS_SYSCALL_REGS works correctly. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220209021745.2215452-4-iii@linux.ibm.com
2022-02-09libbpf: Add PT_REGS_SYSCALL_REGS macroIlya Leoshkevich1-0/+10
Architectures that select ARCH_HAS_SYSCALL_WRAPPER pass a pointer to struct pt_regs to syscall handlers, others unpack it into individual function parameters. Introduce a macro to describe what a particular arch does. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220209021745.2215452-3-iii@linux.ibm.com
2022-02-09selftests/bpf: Fix an endianness issue in bpf_syscall_macro testIlya Leoshkevich1-1/+4
bpf_syscall_macro reads a long argument into an int variable, which produces a wrong value on big-endian systems. Fix by reading the argument into an intermediate long variable first. Fixes: 77fc0330dfe5 ("selftests/bpf: Add a test to confirm PT_REGS_PARM4_SYSCALL") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220209021745.2215452-2-iii@linux.ibm.com
2022-02-09libbpf: Fix signedness bug in btf_dump_array_data()Dan Carpenter1-2/+3
The btf__resolve_size() function returns negative error codes so "elem_size" must be signed for the error handling to work. Fixes: 920d16af9b42 ("libbpf: BTF dumper support for typed data") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220208071552.GB10495@kili
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 20:42:48 +0300