summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2020-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds8-10/+47
Pull networking fixes from David Miller: "Nothing earth shattering here, lots of small fixes (f.e. missing RCU protection, bad ref counting, missing memset(), etc.) all over the place: 1) Use get_file_rcu() in task_file iterator, from Yonghong Song. 2) There are two ways to set remote source MAC addresses in macvlan driver, but only one of which validates things properly. Fix this. From Alvin Šipraga. 3) Missing of_node_put() in gianfar probing, from Sumera Priyadarsini. 4) Preserve device wanted feature bits across multiple netlink ethtool requests, from Maxim Mikityanskiy. 5) Fix rcu_sched stall in task and task_file bpf iterators, from Yonghong Song. 6) Avoid reset after device destroy in ena driver, from Shay Agroskin. 7) Missing memset() in netlink policy export reallocation path, from Johannes Berg. 8) Fix info leak in __smc_diag_dump(), from Peilin Ye. 9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark Tomlinson. 10) Fix number of data stream negotiation in SCTP, from David Laight. 11) Fix double free in connection tracker action module, from Alaa Hleihel. 12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits) net: nexthop: don't allow empty NHA_GROUP bpf: Fix two typos in uapi/linux/bpf.h net: dsa: b53: check for timeout tipc: call rcu_read_lock() in tipc_aead_encrypt_done() net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow net: sctp: Fix negotiation of the number of data streams. dt-bindings: net: renesas, ether: Improve schema validation gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit() hv_netvsc: Remove "unlikely" from netvsc_select_queue bpf: selftests: global_funcs: Check err_str before strstr bpf: xdp: Fix XDP mode when no mode flags specified selftests/bpf: Remove test_align leftovers tools/resolve_btfids: Fix sections with wrong alignment net/smc: Prevent kernel-infoleak in __smc_diag_dump() sfc: fix build warnings on 32-bit net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified" libbpf: Fix map index used in error message net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe() net: atlantic: Use readx_poll_timeout() for large timeout ...
2020-08-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-2/+2
Pull kvm fixes from Paolo Bonzini: - PAE and PKU bugfixes for x86 - selftests fix for new binutils - MMU notifier fix for arm64 * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set KVM: Pass MMU notifier range flags to kvm_unmap_hva_range() kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode KVM: x86: fix access code passed to gva_to_gpa selftests: kvm: Use a shorter encoding to clear RAX
2020-08-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller8-10/+47
Alexei Starovoitov says: ==================== pull-request: bpf 2020-08-21 The following pull-request contains BPF updates for your *net* tree. We've added 11 non-merge commits during the last 5 day(s) which contain a total of 12 files changed, 78 insertions(+), 24 deletions(-). The main changes are: 1) three fixes in BPF task iterator logic, from Yonghong. 2) fix for compressed dwarf sections in vmlinux, from Jiri. 3) fix xdp attach regression, from Andrii. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-21bpf: Fix two typos in uapi/linux/bpf.hTobias Klauser1-5/+5
Also remove trailing whitespaces in bpf_skb_get_tunnel_key example code. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200821133642.18870-1-tklauser@distanz.ch
2020-08-21bpf: selftests: global_funcs: Check err_str before strstrYauheni Kaliuta1-1/+1
The error path in libbpf.c:load_program() has calls to pr_warn() which ends up for global_funcs tests to test_global_funcs.c:libbpf_debug_print(). For the tests with no struct test_def::err_str initialized with a string, it causes call of strstr() with NULL as the second argument and it segfaults. Fix it by calling strstr() only for non-NULL err_str. Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200820115843.39454-1-yauheni.kaliuta@redhat.com
2020-08-21selftests/bpf: Remove test_align leftoversVeronika Kabatova2-2/+1
Calling generic selftests "make install" fails as rsync expects all files from TEST_GEN_PROGS to be present. The binary is not generated anymore (commit 3b09d27cc93d) so we can safely remove it from there and also from gitignore. Fixes: 3b09d27cc93d ("selftests/bpf: Move test_align under test_progs") Signed-off-by: Veronika Kabatova <vkabatov@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/20200819160710.1345956-1-vkabatov@redhat.com
2020-08-21tools/resolve_btfids: Fix sections with wrong alignmentJiri Olsa1-0/+36
The data of compressed section should be aligned to 4 (for 32bit) or 8 (for 64 bit) bytes. The binutils ld sets sh_addralign to 1, which makes libelf fail with misaligned section error during the update as reported by Jesper: FAILED elf_update(WRITE): invalid section alignment While waiting for ld fix, we can fix compressed sections sh_addralign value manually. Adding warning in -vv mode when the fix is triggered: $ ./tools/bpf/resolve_btfids/resolve_btfids -vv vmlinux ... section(36) .comment, size 44, link 0, flags 30, type=1 section(37) .debug_aranges, size 45684, link 0, flags 800, type=1 - fixing wrong alignment sh_addralign 16, expected 8 section(38) .debug_info, size 129104957, link 0, flags 800, type=1 - fixing wrong alignment sh_addralign 1, expected 8 section(39) .debug_abbrev, size 1152583, link 0, flags 800, type=1 - fixing wrong alignment sh_addralign 1, expected 8 section(40) .debug_line, size 7374522, link 0, flags 800, type=1 - fixing wrong alignment sh_addralign 1, expected 8 section(41) .debug_frame, size 702463, link 0, flags 800, type=1 section(42) .debug_str, size 1017571, link 0, flags 830, type=1 - fixing wrong alignment sh_addralign 1, expected 8 section(43) .debug_loc, size 3019453, link 0, flags 800, type=1 - fixing wrong alignment sh_addralign 1, expected 8 section(44) .debug_ranges, size 1744583, link 0, flags 800, type=1 - fixing wrong alignment sh_addralign 16, expected 8 section(45) .symtab, size 2955888, link 46, flags 0, type=2 section(46) .strtab, size 2613072, link 0, flags 0, type=3 ... update ok for vmlinux Another workaround is to disable compressed debug info data CONFIG_DEBUG_INFO_COMPRESSED kernel option. Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Yonghong Song <yhs@fb.com> Cc: Mark Wielaard <mjw@redhat.com> Cc: Nick Clifton <nickc@redhat.com> Link: https://lore.kernel.org/bpf/20200819092342.259004-1-jolsa@kernel.org
2020-08-20libbpf: Fix map index used in error messageToke Høiland-Jørgensen1-1/+1
The error message emitted by bpf_object__init_user_btf_maps() was using the wrong section ID. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200819110534.9058-1-toke@redhat.com
2020-08-19bpftool: Handle EAGAIN error code properly in pids collectionYonghong Song1-0/+2
When the error code is EAGAIN, the kernel signals the user space should retry the read() operation for bpf iterators. Let us do it. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200818222312.2181675-1-yhs@fb.com
2020-08-18libbpf: Fix build on ppc64le architectureAndrii Nakryiko1-1/+1
On ppc64le we get the following warning: In file included from btf_dump.c:16:0: btf_dump.c: In function ‘btf_dump_emit_struct_def’: ../include/linux/kernel.h:20:17: error: comparison of distinct pointer types lacks a cast [-Werror] (void) (&_max1 == &_max2); \ ^ btf_dump.c:882:11: note: in expansion of macro ‘max’ m_sz = max(0LL, btf__resolve_size(d->btf, m->type)); ^~~ Fix by explicitly casting to __s64, which is a return type from btf__resolve_size(). Fixes: 702eddc77a90 ("libbpf: Handle GCC built-in types for Arm NEON") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200818164456.1181661-1-andriin@fb.com
2020-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds30-144/+379
Pull networking fixes from David Miller: "Another batch of fixes: 1) Remove nft_compat counter flush optimization, it generates warnings from the refcount infrastructure. From Florian Westphal. 2) Fix BPF to search for build id more robustly, from Jiri Olsa. 3) Handle bogus getopt lengths in ebtables, from Florian Westphal. 4) Infoleak and other fixes to j1939 CAN driver, from Eric Dumazet and Oleksij Rempel. 5) Reset iter properly on mptcp sendmsg() error, from Florian Westphal. 6) Show a saner speed in bonding broadcast mode, from Jarod Wilson. 7) Various kerneldoc fixes in bonding and elsewhere, from Lee Jones. 8) Fix double unregister in bonding during namespace tear down, from Cong Wang. 9) Disable RP filter during icmp_redirect selftest, from David Ahern" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits) otx2_common: Use devm_kcalloc() in otx2_config_npa() net: qrtr: fix usage of idr in port assignment to socket selftests: disable rp_filter for icmp_redirect.sh Revert "net: xdp: pull ethernet header off packet after computing skb->protocol" phylink: <linux/phylink.h>: fix function prototype kernel-doc warning mptcp: sendmsg: reset iter on error redux net: devlink: Remove overzealous WARN_ON with snapshots tipc: not enable tipc when ipv6 works as a module tipc: fix uninit skb->data in tipc_nl_compat_dumpit() net: Fix potential wrong skb->protocol in skb_vlan_untag() net: xdp: pull ethernet header off packet after computing skb->protocol ipvlan: fix device features bonding: fix a potential double-unregister can: j1939: add rxtimer for multipacket broadcast session can: j1939: abort multipacket broadcast session when timeout occurs can: j1939: cancel rxtimer on multipacket broadcast session complete can: j1939: fix support for multipacket broadcast message net: fddi: skfp: cfm: Remove seemingly unused variable 'ID_sccs' net: fddi: skfp: cfm: Remove set but unused variable 'oldstate' net: fddi: skfp: smt: Remove seemingly unused variable 'ID_sccs' ...
2020-08-18selftests: disable rp_filter for icmp_redirect.shDavid Ahern1-0/+2
h1 is initially configured to reach h2 via r1 rather than the more direct path through r2. If rp_filter is set and inherited for r2, forwarding fails since the source address of h1 is reachable from eth0 vs the packet coming to it via r1 and eth1. Since rp_filter setting affects the test, explicitly reset it. Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-17selftests: kvm: Use a shorter encoding to clear RAXYang Weijiang1-2/+2
If debug_regs.c is built with newer binutils, the resulting binary is "optimized" by the assembler: asm volatile("ss_start: " "xor %%rax,%%rax\n\t" "cpuid\n\t" "movl $0x1a0,%%ecx\n\t" "rdmsr\n\t" : : : "rax", "ecx"); is translated to : 000000000040194e <ss_start>: 40194e: 31 c0 xor %eax,%eax <----- rax->eax? 401950: 0f a2 cpuid 401952: b9 a0 01 00 00 mov $0x1a0,%ecx 401957: 0f 32 rdmsr As you can see rax is replaced with eax in target binary code. This causes a difference is the length of xor instruction (2 Byte vs 3 Byte), and makes the hard-coded instruction length check fail: /* Instruction lengths starting at ss_start */ int ss_size[4] = { 3, /* xor */ <-------- 2 or 3? 2, /* cpuid */ 5, /* mov */ 2, /* rdmsr */ }; Encode the shorter version directly and, while at it, fix the "clobbers" of the asm. Cc: stable@vger.kernel.org Signed-off-by: Yang Weijiang <weijiang.yang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller1-30/+43
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Endianness issue in IPv4 option support in nft_exthdr, from Stephen Suryaputra. 2) Removes the waitcount optimization in nft_compat, from Florian Westphal. 3) Remove ipv6 -> nf_defrag_ipv6 module dependency, from Florian Westphal. 4) Memleak in chain binding support, also from Florian. 5) Simplify nft_flowtable.sh selftest, from Fabian Frederick. 6) Optional MTU arguments for selftest nft_flowtable.sh, also from Fabian. 7) Remove noise error report when killing process in selftest nft_flowtable.sh, from Fabian Frederick. 8) Reject bogus getsockopt option length in ebtables, from Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-16Merge tag 'sh-for-5.9' of git://git.libc.org/linux-shLinus Torvalds1-1/+7
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
2020-08-15Merge tag 'perf-tools-2020-08-14' of ↵Linus Torvalds36-247/+1252
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: "Fixes: - Fixes for 'perf bench numa'. - Always memset source before memcpy in 'perf bench mem'. - Quote CC and CXX for their arguments to fix build in environments using those variables to pass more than just the compiler names. - Fix module symbol processing, addressing regression detected via "perf test". - Allow multiple probes in record+script_probe_vfs_getname.sh 'perf test' entry. Improvements: - Add script to autogenerate socket family name id->string table from copy of kernel header, used so far in 'perf trace'. - 'perf ftrace' improvements to provide similar options for this utility so that one can go from 'perf record', 'perf trace', etc to 'perf ftrace' just by changing the name of the subcommand. - Prefer new "sched:sched_waking" trace event when it exists in 'perf sched' post processing. - Update POWER9 metrics to utilize other metrics. - Fall back to querying debuginfod if debuginfo not found locally. Miscellaneous: - Sync various kvm headers with kernel sources" * tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits) perf ftrace: Make option description initials all capital letters perf build-ids: Fall back to debuginfod query if debuginfo not found perf bench numa: Remove dead code in parse_nodes_opt() perf stat: Update POWER9 metrics to utilize other metrics perf ftrace: Add change log perf: ftrace: Add set_tracing_options() to set all trace options perf ftrace: Add option --tid to filter by thread id perf ftrace: Add option -D/--delay to delay tracing perf: ftrace: Allow set graph depth by '--graph-opts' perf ftrace: Add support for trace option tracing_thresh perf ftrace: Add option 'verbose' to show more info for graph tracer perf ftrace: Add support for tracing option 'irq-info' perf ftrace: Add support for trace option funcgraph-irqs perf ftrace: Add support for trace option sleep-time perf ftrace: Add support for tracing option 'func_stack_trace' perf tools: Add general function to parse sublevel options perf ftrace: Add option '--inherit' to trace children processes perf ftrace: Show trace column header perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size perf ftrace: Factor out function write_tracing_file_int() ...
2020-08-15all arch: remove system call sys_sysctlXiaoming Ni3-3/+3
Since commit 61a47c1ad3a4dc ("sysctl: Remove the sysctl system call"), sys_sysctl is actually unavailable: any input can only return an error. We have been warning about people using the sysctl system call for years and believe there are no more users. Even if there are users of this interface if they have not complained or fixed their code by now they probably are not going to, so there is no point in warning them any longer. So completely remove sys_sysctl on all architectures. [nixiaoming@huawei.com: s390: fix build error for sys_call_table_emu] Link: http://lkml.kernel.org/r/20200618141426.16884-1-nixiaoming@huawei.com Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Will Deacon <will@kernel.org> [arm/arm64] Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bin Meng <bin.meng@windriver.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: chenzefeng <chenzefeng2@huawei.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christian Brauner <christian@brauner.io> Cc: Chris Zankel <chris@zankel.net> Cc: David Howells <dhowells@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Diego Elio Pettenò <flameeyes@flameeyes.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kars de Jong <jongk@linux-m68k.org> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Nick Piggin <npiggin@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Olof Johansson <olof@lixom.net> Cc: Paul Burton <paulburton@kernel.org> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Sven Schnelle <svens@stackframe.org> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Zhou Yanjie <zhouyanjie@wanyeetech.com> Link: http://lkml.kernel.org/r/20200616030734.87257-1-nixiaoming@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-15selftests/exec: add file type errno testsKees Cook3-2/+200
Make sure execve() returns the expected errno values for non-regular files. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marc Zyngier <maz@kernel.org> Link: http://lkml.kernel.org/r/20200813231723.2725102-3-keescook@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-15sh: Add SECCOMP_FILTERMichael Karcher1-1/+7
Port sh to use the new SECCOMP_FILTER code. Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Rich Felker <dalias@libc.org>
2020-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller28-114/+334
Daniel Borkmann says: ==================== pull-request: bpf 2020-08-15 The following pull-request contains BPF updates for your *net* tree. We've added 23 non-merge commits during the last 4 day(s) which contain a total of 32 files changed, 421 insertions(+), 141 deletions(-). The main changes are: 1) Fix sock_ops ctx access splat due to register override, from John Fastabend. 2) Batch of various fixes to libbpf, bpftool, and selftests when testing build in 32-bit mode, from Andrii Nakryiko. 3) Fix vmlinux.h generation on ARM by mapping GCC built-in types (__Poly*_t) to equivalent ones clang can work with, from Jean-Philippe Brucker. 4) Fix build_id lookup in bpf_get_stackid() helper by walking all NOTE ELF sections instead of just first, from Jiri Olsa. 5) Avoid use of __builtin_offsetof() in libbpf for CO-RE, from Yonghong Song. 6) Fix segfault in test_mmap due to inconsistent length params, from Jianlin Lv. 7) Don't override errno in libbpf when logging errors, from Toke Høiland-Jørgensen. 8) Fix v4_to_v6 sockaddr conversion in sk_lookup test, from Stanislav Fomichev. 9) Add link to bpf-helpers(7) man page to BPF doc, from Joe Stringer. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14perf ftrace: Make option description initials all capital lettersArnaldo Carvalho de Melo1-14/+14
And improve a bit the -m description to state that a B/K/M/G suffix is needed. Cc: Changbin Du <changbin.du@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf build-ids: Fall back to debuginfod query if debuginfo not foundFrank Ch. Eigler6-1/+43
During a perf-record, use the -ldebuginfod API to query a debuginfod server, should the debug data not be found in the usual system locations. If successful, the usual $HOME/.debug dir is populated. Tested with: $ find . . ./ctags-debuginfo-5.8-26.fc31.x86_64.rpm ./usr ./usr/lib ./usr/lib/debug ./usr/lib/debug/.build-id ./usr/lib/debug/.build-id/ca ./usr/lib/debug/.build-id/ca/46f6ae6a0cee57d85abc1d461c49074248908d ./usr/lib/debug/.build-id/ca/46f6ae6a0cee57d85abc1d461c49074248908d.debug ./usr/lib/debug/usr ./usr/lib/debug/usr/bin ./usr/lib/debug/usr/bin/ctags-5.8-26.fc31.x86_64.debug $ debuginfod -F . ... $ rm -rf ~/.debug/ ; mkdir ~/.debug $ perf record make tags BUILD: Doing 'make -j8' parallel build GEN tags [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.107 MB perf.data (1483 samples) ] $ find ~/.debug | grep ctags /home/jolsa/.debug/usr/bin/ctags /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/elf /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/probes $ rm -rf ~/.debug/ ; mkdir ~/.debug $ DEBUGINFOD_URLS=http://localhost:8002 perf record make tags BUILD: Doing 'make -j8' parallel build GEN tags [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.108 MB perf.data (1531 samples) ] $ find ~/.debug | grep ctag /home/jolsa/.debug/usr/bin/ctags /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/debug /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/elf /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/probes Note the 'debug' file is created in the last run. Note that currently the debuginfo data are downloaded only on record path, we still need add this support to perf build-id/report.. and test ;-) Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Frank Ch. Eigler <fche@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf bench numa: Remove dead code in parse_nodes_opt()Peng Fan1-2/+0
In the function parse_nodes_opt(), the statement "return 0;" is dead code, remove it. Signed-off-by: Peng Fan <fanpeng@loongson.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/1597401894-27549-1-git-send-email-fanpeng@loongson.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf stat: Update POWER9 metrics to utilize other metricsPaul A. Clarke1-24/+24
These changes take advantage of the new capability added in merge commit 00e4db51259a5f936fec1424b884f029479d3981 "Allow using computed metrics in calculating other metrics". The net is a simplification of the expressions for a handful of metrics, but no functional change. Signed-off-by: Paul Clarke <pc@us.ibm.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Link: http://lore.kernel.org/lkml/20200813222155.268183-1-pc@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add change logChangbin Du1-0/+1
Add a change log after previous enhancements. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-19-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf: ftrace: Add set_tracing_options() to set all trace optionsChangbin Du1-55/+63
Now the __cmd_ftrace() becomes a bit long. This moves the trace option setting code to a separate function set_tracing_options(). Suggested-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-18-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add option --tid to filter by thread idChangbin Du2-0/+6
This allows us to trace single thread instead of the whole process. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-17-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add option -D/--delay to delay tracingChangbin Du2-3/+20
This adds an option '-D/--delay' to allow us to start tracing some times later after workload is launched. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-16-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf: ftrace: Allow set graph depth by '--graph-opts'Changbin Du2-7/+3
This is to have a consistent view of all graph tracer options. The original option '--graph-depth' is marked as deprecated. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-15-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add support for trace option tracing_threshChangbin Du2-1/+26
This adds an option '--graph-opts thresh' to setup trace duration threshold for funcgraph tracer. $ sudo ./perf ftrace -G '*' --graph-opts thresh=100 3) ! 184.060 us | } /* schedule */ 3) ! 185.600 us | } /* exit_to_usermode_loop */ 2) ! 225.989 us | } /* schedule_idle */ 2) # 4140.051 us | } /* do_idle */ Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-14-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add option 'verbose' to show more info for graph tracerChangbin Du2-1/+29
Sometimes we want ftrace display more and longer information about the trace. $ sudo perf ftrace -G '*' 2) 0.979 us | mutex_unlock(); 2) 1.540 us | __fsnotify_parent(); 2) 0.433 us | fsnotify(); $ sudo perf ftrace -G '*' --graph-opts verbose 14160.770883 | 0) <...>-47814 | .... | 1.289 us | mutex_unlock(); 14160.770886 | 0) <...>-47814 | .... | 1.624 us | __fsnotify_parent(); 14160.770887 | 0) <...>-47814 | .... | 0.636 us | fsnotify(); 14160.770888 | 0) <...>-47814 | .... | 0.328 us | __sb_end_write(); 14160.770888 | 0) <...>-47814 | d... | 0.430 us | fpregs_assert_state_consistent(); 14160.770889 | 0) <...>-47814 | d... | | do_syscall_64() { 14160.770889 | 0) <...>-47814 | .... | | __x64_sys_close() { Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-13-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add support for tracing option 'irq-info'Changbin Du2-1/+21
This adds support to display irq context info for function tracer. To do this, just specify a '--func-opts irq-info' option. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-12-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add support for trace option funcgraph-irqsChangbin Du2-1/+21
This adds an option '--graph-opts noirqs' to filter out functions executed in irq context. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-11-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add support for trace option sleep-timeChangbin Du2-0/+45
This adds an option '--graph-opts nosleep-time' which allow us only to measure on-CPU time. This option is function_graph tracer only. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-10-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add support for tracing option 'func_stack_trace'Changbin Du2-0/+46
This adds support to display call trace for function tracer. To do this, just specify a '--func-opts call-graph' option. Example: $ sudo perf ftrace -T vfs_read --func-opts call-graph iio-sensor-prox-855 [003] 6168.369657: vfs_read <-ksys_read iio-sensor-prox-855 [003] 6168.369677: <stack trace> => vfs_read => ksys_read => __x64_sys_read => do_syscall_64 => entry_SYSCALL_64_after_hwframe ... Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-9-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf tools: Add general function to parse sublevel optionsChangbin Du4-44/+99
This factors out a general function perf_parse_sublevel_options() to parse sublevel options. The 'sublevel' options is something like the '--debug' options which allow more sublevel options. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-8-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add option '--inherit' to trace children processesChangbin Du2-0/+41
This adds an option '--inherit' to allow us trace children processes spawned by our target. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-7-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Show trace column headerChangbin Du1-0/+3
This makes 'perf ftrace' display column header before printing trace. $ sudo perf ftrace # tracer: function # # entries-in-buffer/entries-written: 0/0 #P:8 # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | <...>-9246 [006] 10726.262760: mutex_unlock <-rb_simple_write <...>-9246 [006] 10726.262764: __fsnotify_parent <-vfs_write <...>-9246 [006] 10726.262765: fsnotify <-vfs_write <...>-9246 [006] 10726.262766: __sb_end_write <-vfs_write <...>-9246 [006] 10726.262767: fpregs_assert_state_consistent <-do_syscall_64 Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-6-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer sizeChangbin Du2-0/+60
This adds an option '-m/--buffer-size' to allow us set the size of per-cpu tracing buffer. Committer testing: Before running with this option: # find /sys/kernel/tracing/ -name buffer_size_kb | xargs cat 1408 1408 1408 1408 1408 1408 1408 1408 1408 # Then, run: # perf ftrace -m 2048K | head -10 2) | mutex_unlock() { 2) ==========> | 2) | smp_irq_work_interrupt() { 2) | irq_enter() { 2) 0.121 us | rcu_irq_enter(); 2) 0.128 us | irqtime_account_irq(); 2) 0.719 us | } 2) | __wake_up() { 2) | __wake_up_common_lock() { 2) 0.105 us | _raw_spin_lock_irqsave(); # Now look at those tracefs knobs: # find /sys/kernel/tracing/ -name buffer_size_kb | xargs cat 2048 2048 2048 2048 2048 2048 2048 2048 2048 # This should be similar to the -m option in the other perf tools, such as 'perf record', 'perf trace', etc. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-5-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Factor out function write_tracing_file_int()Changbin Du1-5/+12
We will reuse this function later. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-4-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add option '-F/--funcs' to list available functionsChangbin Du2-0/+50
This adds an option '-F/--funcs' to list all available functions to trace, which is read from tracing file 'available_filter_functions'. $ sudo ./perf ftrace -F | head trace_initcall_finish_cb initcall_blacklisted do_one_initcall do_one_initcall trace_initcall_start_cb run_init_process try_to_run_init_process match_dev_by_label match_dev_by_uuid rootfs_init_fs_context $ Committer notes: This is the same command line option and for the same purpose as in 'perf probe'. Signed-off-by: Changbin Du <changbin.du@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-3-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Select function/function_graph tracer automaticallyChangbin Du3-23/+48
The '-g/-G' options have already implied function_graph tracer should be used instead of function tracer. So we don't need extra option '--tracer' in this case. This patch changes the behavior as below: - If '-g' or '-G' option is on, then function_graph tracer is used. - If '-T' or '-N' option is on, then function tracer is used. - The function_graph has priority over function tracer. - The option '--tracer' only take effect if neither -g/-G nor -T/-N is specified. Here are some examples. This will start tracing all functions using default tracer: $ sudo perf ftrace This will trace all functions using function graph tracer: $ sudo perf ftrace -G '*' This will trace function vfs_read using function graph tracer: $ sudo perf ftrace -G vfs_read This will trace function vfs_read using function tracer: $ sudo perf ftrace -T vfs_read Committer notes: Using '-h -G' will tell what that option is about, so to further clarify the above examples: # perf ftrace -h -G -G, --graph-funcs <func> Set graph filter on given functions # perf ftrace -h -g -g, --nograph-funcs <func> Set nograph filter on given functions # perf ftrace -h -T -T, --trace-funcs <func> trace given functions only # perf ftrace -h -N -N, --notrace-funcs <func> do not trace given functions # Signed-off-by: Changbin Du <changbin.du@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-2-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds16-68/+118
Pull networking fixes from David Miller: "Some merge window fallout, some longer term fixes: 1) Handle headroom properly in lapbether and x25_asy drivers, from Xie He. 2) Fetch MAC address from correct r8152 device node, from Thierry Reding. 3) In the sw kTLS path we should allow MSG_CMSG_COMPAT in sendmsg, from Rouven Czerwinski. 4) Correct fdputs in socket layer, from Miaohe Lin. 5) Revert troublesome sockptr_t optimization, from Christoph Hellwig. 6) Fix TCP TFO key reading on big endian, from Jason Baron. 7) Missing CAP_NET_RAW check in nfc, from Qingyu Li. 8) Fix inet fastreuse optimization with tproxy sockets, from Tim Froidcoeur. 9) Fix 64-bit divide in new SFC driver, from Edward Cree. 10) Add a tracepoint for prandom_u32 so that we can more easily perform usage analysis. From Eric Dumazet. 11) Fix rwlock imbalance in AF_PACKET, from John Ogness" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits) net: openvswitch: introduce common code for flushing flows af_packet: TPACKET_V3: fix fill status rwlock imbalance random32: add a tracepoint for prandom_u32() Revert "ipv4: tunnel: fix compilation on ARCH=um" net: accept an empty mask in /sys/class/net/*/queues/rx-*/rps_cpus net: ethernet: stmmac: Disable hardware multicast filter net: stmmac: dwmac1000: provide multicast filter fallback ipv4: tunnel: fix compilation on ARCH=um vsock: fix potential null pointer dereference in vsock_poll() sfc: fix ef100 design-param checking net: initialize fastreuse on inet_inherit_port net: refactor bind_bucket fastreuse into helper net: phy: marvell10g: fix null pointer dereference net: Fix potential memory leak in proto_register() net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init ionic_lif: Use devm_kcalloc() in ionic_qcq_alloc() net/nfc/rawsock.c: add CAP_NET_RAW check. hinic: fix strncpy output truncated compile warnings drivers/net/wan/x25_asy: Added needed_headroom and a skb->len check net/tls: Fix kmap usage ...
2020-08-14selftests/bpf: Make test_varlen work with 32-bit user-space archAndrii Nakryiko2-7/+7
Despite bpftool generating data section memory layout that will work for 32-bit architectures on user-space side, BPF programs should be careful to not use ambiguous types like `long`, which have different size in 32-bit and 64-bit environments. Fix that in test by using __u64 explicitly, which is a recommended approach anyway. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200813204945.1020225-10-andriin@fb.com
2020-08-14tools/bpftool: Generate data section struct with conservative alignmentAndrii Nakryiko1-0/+14
The comment in the code describes this in good details. Generate such a memory layout that would work both on 32-bit and 64-bit architectures for user-space. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200813204945.1020225-9-andriin@fb.com
2020-08-14selftests/bpf: Correct various core_reloc 64-bit assumptionsAndrii Nakryiko2-42/+47
Ensure that types are memory layout- and field alignment-compatible regardless of 32/64-bitness mix of libbpf and BPF architecture. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200813204945.1020225-8-andriin@fb.com
2020-08-14libbpf: Enforce 64-bitness of BTF for BPF object filesAndrii Nakryiko1-0/+4
BPF object files are always targeting 64-bit BPF target architecture, so enforce that at BTF level as well. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200813204945.1020225-7-andriin@fb.com
2020-08-14selftests/bpf: Fix btf_dump test cases on 32-bit archesAndrii Nakryiko1-7/+20
Fix btf_dump test cases by hard-coding BPF's pointer size of 8 bytes for cases where it's impossible to deterimne the pointer size (no long type in BTF). In cases where it's known, validate libbpf correctly determines it as 8. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200813204945.1020225-6-andriin@fb.com
2020-08-14libbpf: Handle BTF pointer sizes more carefullyAndrii Nakryiko4-4/+87
With libbpf and BTF it is pretty common to have libbpf built for one architecture, while BTF information was generated for a different architecture (typically, but not always, BPF). In such case, the size of a pointer might differ betweem architectures. libbpf previously was always making an assumption that pointer size for BTF is the same as native architecture pointer size, but that breaks for cases where libbpf is built as 32-bit library, while BTF is for 64-bit architecture. To solve this, add heuristic to determine pointer size by searching for `long` or `unsigned long` integer type and using its size as a pointer size. Also, allow to override the pointer size with a new API btf__set_pointer_size(), for cases where application knows which pointer size should be used. User application can check what libbpf "guessed" by looking at the result of btf__pointer_size(). If it's not 0, then libbpf successfully determined a pointer size, otherwise native arch pointer size will be used. For cases where BTF is parsed from ELF file, use ELF's class (32-bit or 64-bit) to determine pointer size. Fixes: 8a138aed4a80 ("bpf: btf: Add BTF support to libbpf") Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200813204945.1020225-5-andriin@fb.com
2020-08-14libbpf: Fix BTF-defined map-in-map initialization on 32-bit host archesAndrii Nakryiko1-6/+10
Libbpf built in 32-bit mode should be careful about not conflating 64-bit BPF pointers in BPF ELF file and host architecture pointers. This patch fixes issue of incorrect initializating of map-in-map inner map slots due to such difference. Fixes: 646f02ffdd49 ("libbpf: Add BTF-defined map-in-map support") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200813204945.1020225-4-andriin@fb.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-22 11:39:37 +0300