summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2016-12-26Merge branch 'turbostat' of ↵Linus Torvalds3-371/+673
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown. * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: remove obsolete -M, -m, -C, -c options tools/power turbostat: Make extensible via the --add parameter tools/power turbostat: Denverton uses a 25 MHz crystal, not 19.2 MHz tools/power turbostat: line up headers when -M is used tools/power turbostat: fix SKX PKG_CSTATE_LIMIT decoding tools/power turbostat: Support Knights Mill (KNM) tools/power turbostat: Display HWP OOB status tools/power turbostat: fix Denverton BCLK tools/power turbostat: use intel-family.h model strings tools/power/turbostat: Add Denverton RAPL support tools/power/turbostat: Add Denverton support tools/power/turbostat: split core MSR support into status + limit tools/power turbostat: fix error case overflow read of slm_freq_table[] tools/power turbostat: Allocate correct amount of fd and irq entries tools/power turbostat: switch to tab delimited output tools/power turbostat: Gracefully handle ACPI S3 tools/power turbostat: tidy up output on Joule counter overflow
2016-12-24tools/power turbostat: remove obsolete -M, -m, -C, -c optionsLen Brown2-110/+2
The new --add option has replaced the -M, -m, -C, -c options Eg. -M 0x10 is now --add msr0x10,raw -m 0x10 is now --add msr0x10,raw,u32 -C 0x10 is now --add msr0x10,delta -c 0x10 is now --add msr0x10,delta,u32 The --add option can be repeated to add any number of counters, while the previous options were limited to adding one of each type. In addition, the --add option can accept a column label, and can also display a counter as a percentage of elapsed cycles. Eg. --add msr0x3fe,core,percent,MY_CC3 Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-24tools/power turbostat: Make extensible via the --add parameterLen Brown2-9/+409
Create the "--add" parameter. This can be used to teach an existing turbostat binary about any number of any type of counter. turbostat(8) details the syntax for --add. Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-24Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds27-405/+865
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "On the kernel side there's two x86 PMU driver fixes and a uprobes fix, plus on the tooling side there's a number of fixes and some late updates" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) perf sched timehist: Fix invalid period calculation perf sched timehist: Remove hardcoded 'comm_width' check at print_summary perf sched timehist: Enlarge default 'comm_width' perf sched timehist: Honour 'comm_width' when aligning the headers perf/x86: Fix overlap counter scheduling bug perf/x86/pebs: Fix handling of PEBS buffer overflows samples/bpf: Move open_raw_sock to separate header samples/bpf: Remove perf_event_open() declaration samples/bpf: Be consistent with bpf_load_program bpf_insn parameter tools lib bpf: Add bpf_prog_{attach,detach} samples/bpf: Switch over to libbpf perf diff: Do not overwrite valid build id perf annotate: Don't throw error for zero length symbols perf bench futex: Fix lock-pi help string perf trace: Check if MAP_32BIT is defined (again) samples/bpf: Make perf_event_read() static uprobes: Fix uprobes on MIPS, allow for a cache flush after ixol breakpoint creation samples/bpf: Make samples more libbpf-centric tools lib bpf: Add flags to bpf_create_map() tools lib bpf: use __u32 from linux/types.h ...
2016-12-22perf sched timehist: Fix invalid period calculationNamhyung Kim1-1/+1
When --time option is given with a value outside recorded time, the last sample time (tprev) was set to that value and run time calculation might be incorrect. This is a problem of the first samples for each cpus since it would skip the runtime update when tprev is 0. But with --time option it had non-zero (which is invalid) value so the calculation is also incorrect. For example, let's see the followging: $ perf sched timehist time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- 3195.968367 [0003] <idle> 0.000 0.000 0.000 3195.968386 [0002] Timer[4306/4277] 0.000 0.000 0.018 3195.968397 [0002] Web Content[4277] 0.000 0.000 0.000 3195.968595 [0001] JS Helper[4302/4277] 0.000 0.000 0.000 3195.969217 [0000] <idle> 0.000 0.000 0.621 3195.969251 [0001] kworker/1:1H[291] 0.000 0.000 0.033 The sample starts at 3195.968367 but when I gave a time interval from 3194 to 3196 (in sec) it will calculate the whole 2 second as runtime. In below, 2 cpus accounted it as runtime, other 2 cpus accounted it as idle time. Before: $ perf sched timehist --time 3194,3196 -s | tail Idle stats: CPU 0 idle for 1995.991 msec CPU 1 idle for 20.793 msec CPU 2 idle for 30.191 msec CPU 3 idle for 1999.852 msec Total number of unique tasks: 23 Total number of context switches: 128 Total run time (msec): 3724.940 After: $ perf sched timehist --time 3194,3196 -s | tail Idle stats: CPU 0 idle for 10.811 msec CPU 1 idle for 20.793 msec CPU 2 idle for 30.191 msec CPU 3 idle for 18.337 msec Total number of unique tasks: 23 Total number of context switches: 128 Total run time (msec): 18.139 Committer notes: Further testing: Before: Idle stats: CPU 0 idle for 229.785 msec CPU 1 idle for 937.944 msec CPU 2 idle for 188.931 msec CPU 3 idle for 986.185 msec After: # perf sched timehist --time 40602,40603 -s | tail Idle stats: CPU 0 idle for 229.785 msec CPU 1 idle for 175.407 msec CPU 2 idle for 188.931 msec CPU 3 idle for 223.657 msec Total number of unique tasks: 68 Total number of context switches: 814 Total run time (msec): 97.688 # for cpu in `seq 0 3` ; do echo -n "CPU $cpu idle for " ; perf sched timehist --time 40602,40603 | grep "\[000${cpu}\].*\<idle\>" | tr -s ' ' | cut -d' ' -f7 | awk '{entries++ ; s+=$1} END {print s " msec (entries: " entries ")"}' ; done CPU 0 idle for 229.721 msec (entries: 123) CPU 1 idle for 175.381 msec (entries: 65) CPU 2 idle for 188.903 msec (entries: 56) CPU 3 idle for 223.61 msec (entries: 102) Difference due to the idle stats being accounted at nanoseconds precision while the <idle> entries in 'perf sched timehist' are trucated at msec.usec. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 853b74071110 ("perf sched timehist: Add option to specify time window of interest") Link: http://lkml.kernel.org/r/20161222060350.17655-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-22perf sched timehist: Remove hardcoded 'comm_width' check at print_summaryNamhyung Kim1-3/+0
Now that the default 'comm_width' value is 30, no need to check that at print_summary, Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-22perf sched timehist: Enlarge default 'comm_width'Namhyung Kim1-1/+1
Current default value is 20 but it's easily changed to a bigger value as task has a long name and different tid and pid. And it makes the output not aligned. So change it to have a large value as summary shows. Committer notes: Before: # perf sched record ^C # perf sched timehist <SNIP> 40602.770537 [0001] rcuos/2[29] 7.970 0.002 0.020 40602.771512 [0003] <idle> 0.003 0.000 0.986 40602.771586 [0001] <idle> 0.020 0.000 1.049 40602.771606 [0001] qemu-system-x86[3593/3510] 0.000 0.002 0.020 40602.771629 [0003] qemu-system-x86[3510] 0.000 0.003 0.116 40602.771776 [0000] <idle> 0.001 0.000 1.892 <SNIP> After: # perf sched timehist <SNIP> 40602.770537 [0001] rcuos/2[29] 7.970 0.002 0.020 40602.771512 [0003] <idle> 0.003 0.000 0.986 40602.771586 [0001] <idle> 0.020 0.000 1.049 40602.771606 [0001] qemu-system-x86[3593/3510] 0.000 0.002 0.020 40602.771629 [0003] qemu-system-x86[3510] 0.000 0.003 0.116 <SNIP> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-22perf sched timehist: Honour 'comm_width' when aligning the headersNamhyung Kim1-3/+4
Current default value is 20, but that may change in the future, so make places where we have 20 hardcoded use 'comm_width'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20tools lib bpf: Add bpf_prog_{attach,detach}Joe Stringer2-0/+26
Commit d8c5b17f2bc0 ("samples: bpf: add userspace example for attaching eBPF programs to cgroups") added these functions to samples/libbpf, but during this merge all of the samples libbpf functionality is shifting to tools/lib/bpf. Shift these functions there. Committer notes: Use bzero + attr.FIELD = value instead of 'attr = { .FIELD = value, just like the other wrapper calls to sys_bpf with bpf_attr to make this build in older toolchais, such as the ones in CentOS 5 and 6. Signed-off-by: Joe Stringer <joe@ovn.org> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-au2zvtsh55vqeo3v3uw7jr4c@git.kernel.org Link: https://github.com/joestringer/linux/commit/353e6f298c3d0a92fa8bfa61ff898c5050261a12.patch Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20perf diff: Do not overwrite valid build idKan Liang1-1/+2
Fixes a perf diff regression issue which was introduced by commit 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") The binary name could be same when perf diff different binaries. Build id is used to distinguish between them. However, the previous patch assumes the same binary name has same build id. So it overwrites the build id according to the binary name, regardless of whether the build id is set or not. Check the has_build_id in dso__load. If the build id is already set, use it. Before the fix: $ perf diff 1.perf.data 2.perf.data # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... ................ ............................. # 99.83% -99.80% tchain_edit [.] f2 0.12% +99.81% tchain_edit [.] f3 0.02% -0.01% [ixgbe] [k] ixgbe_read_reg After the fix: $ perf diff 1.perf.data 2.perf.data # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... ................ ............................. # 99.83% +0.10% tchain_edit [.] f3 0.12% -0.08% tchain_edit [.] f2 Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> CC: Dima Kogan <dima@secretsauce.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") Link: http://lkml.kernel.org/r/1481642984-13593-1-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20perf annotate: Don't throw error for zero length symbolsRavi Bangoria1-1/+2
'perf report --tui' exits with error when it finds a sample of zero length symbol (i.e. addr == sym->start == sym->end). Actually these are valid samples. Don't exit TUI and show report with such symbols. Reported-and-Tested-by: Anton Blanchard <anton@samba.org> Link: https://lkml.org/lkml/2016/10/8/189 Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Riyder <chris.ryder@arm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@kernel.org # v4.9+ Link: http://lkml.kernel.org/r/1479804050-5028-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20perf bench futex: Fix lock-pi help stringDavidlohr Bueso1-1/+1
Obvious copy/paste typo from the requeue program. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Davidlohr Bueso <dbueso@suse.de> Link: http://lkml.kernel.org/r/1481830584-30909-1-git-send-email-dave@stgolabs.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20perf trace: Check if MAP_32BIT is defined (again)Jiri Olsa1-0/+2
There might be systems where MAP_32BIT is not defined, like some some RHEL7 powerpc versions. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Kyle McMartin <kyle@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 256763b01741 ("perf trace beauty mmap: Add more conditional defines") Link: http://lkml.kernel.org/r/1481831814-23683-1-git-send-email-jolsa@kernel.org [ Changed the Fixme cset to the one removing the conditional switch case for MAP_32BIT ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-19Merge tag 'libnvdimm-for-4.10' of ↵Linus Torvalds1-7/+23
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The libnvdimm pull request is relatively small this time around due to some development topics being deferred to 4.11. As for this pull request the bulk of it has been in -next for several releases leading to one late fix being added (commit 868f036fee4b ("libnvdimm: fix mishandled nvdimm_clear_poison() return value")). It has received a build success notification from the 0day-kbuild robot and passes the latest libnvdimm unit tests. Summary: - Dynamic label support: To date namespace label support has been limited to disambiguating cases where PMEM (direct load/store) and BLK (mmio aperture) accessed-capacity alias on the same DIMM. Since 4.9 added support for multiple namespaces per PMEM-region there is value to support namespace labels even in the non-aliasing case. The presence of a valid namespace index block force-enables label support when the kernel would otherwise rely on region boundaries, and permits the region to be sub-divided. - Handle media errors in namespace metadata: Complement the error handling for media errors in namespace data areas with support for clearing errors on writes, and downgrading potential machine-check exceptions to simple i/o errors on read. - Device-DAX region attributes: Add 'align', 'id', and 'size' as attributes for device-dax regions. In particular this enables userspace tooling to generically size memory mapping and i/o operations. Prevent userspace from growing assumptions / dependencies about the parent device topology for a dax region. A libnvdimm namespace may not always be the parent device of a dax region. - Various cleanups and small fixes" * tag 'libnvdimm-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: add region 'id', 'size', and 'align' attributes libnvdimm: fix mishandled nvdimm_clear_poison() return value libnvdimm: replace mutex_is_locked() warnings with lockdep_assert_held libnvdimm, pfn: fix align attribute libnvdimm, e820: use module_platform_driver libnvdimm, namespace: use octal for permissions libnvdimm, namespace: avoid multiple sector calculations libnvdimm: remove else after return in nsio_rw_bytes() libnvdimm, namespace: fix the type of name variable libnvdimm: use consistent naming for request_mem_region() nvdimm: use the right length of "pmem" libnvdimm: check and clear poison before writing to pmem tools/testing/nvdimm: dynamic label support libnvdimm: allow a platform to force enable label support libnvdimm: use generic iostat interfaces
2016-12-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+29
Pull networking fixes and cleanups from David Miller: 1) Revert bogus nla_ok() change, from Alexey Dobriyan. 2) Various bpf validator fixes from Daniel Borkmann. 3) Add some necessary SET_NETDEV_DEV() calls to hsis_femac and hip04 drivers, from Dongpo Li. 4) Several ethtool ksettings conversions from Philippe Reynes. 5) Fix bugs in inet port management wrt. soreuseport, from Tom Herbert. 6) XDP support for virtio_net, from John Fastabend. 7) Fix NAT handling within a vrf, from David Ahern. 8) Endianness fixes in dpaa_eth driver, from Claudiu Manoil * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (63 commits) net: mv643xx_eth: fix build failure isdn: Constify some function parameters mlxsw: spectrum: Mark split ports as such cgroup: Fix CGROUP_BPF config qed: fix old-style function definition net: ipv6: check route protocol when deleting routes r6040: move spinlock in r6040_close as SOFTIRQ-unsafe lock order detected irda: w83977af_ir: cleanup an indent issue net: sfc: use new api ethtool_{get|set}_link_ksettings net: davicom: dm9000: use new api ethtool_{get|set}_link_ksettings net: cirrus: ep93xx: use new api ethtool_{get|set}_link_ksettings net: chelsio: cxgb3: use new api ethtool_{get|set}_link_ksettings net: chelsio: cxgb2: use new api ethtool_{get|set}_link_ksettings bpf: fix mark_reg_unknown_value for spilled regs on map value marking bpf: fix overflow in prog accounting bpf: dynamically allocate digest scratch buffer gtp: Fix initialization of Flags octet in GTPv1 header gtp: gtp_check_src_ms_ipv4() always return success net/x25: use designated initializers isdn: use designated initializers ...
2016-12-18Merge branch 'kbuild' of ↵Linus Torvalds12-16/+12
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - prototypes for x86 asm-exported symbols (Adam Borowski) and a warning about missing CRCs (Nick Piggin) - asm-exports fix for LTO (Nicolas Pitre) - thin archives improvements (Nick Piggin) - linker script fix for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION (Nick Piggin) - genksyms support for __builtin_va_list keyword - misc minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: x86/kbuild: enable modversions for symbols exported from asm kbuild: fix scripts/adjust_autoksyms.sh* for the no modules case scripts/kallsyms: remove last remnants of --page-offset option make use of make variable CURDIR instead of calling pwd kbuild: cmd_export_list: tighten the sed script kbuild: minor improvement for thin archives build kbuild: modpost warn if export version crc is missing kbuild: keep data tables through dead code elimination kbuild: improve linker compatibility with lib-ksyms.o build genksyms: Regenerate parser kbuild/genksyms: handle va_list type kbuild: thin archives for multi-y targets kbuild: kallsyms allow 3-pass generation if symbols size has changed
2016-12-18Merge branch 'for-4.10/libnvdimm' into libnvdimm-for-nextDan Williams1-7/+23
2016-12-17bpf, test_verifier: fix a test case error result on unprivilegedDaniel Borkmann1-1/+1
Running ./test_verifier as unprivileged lets 1 out of 98 tests fail: [...] #71 unpriv: check that printk is disallowed FAIL Unexpected error message! 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r1 = r10 2: (07) r1 += -8 3: (b7) r2 = 8 4: (bf) r3 = r1 5: (85) call bpf_trace_printk#6 unknown func bpf_trace_printk#6 [...] The test case is correct, just that the error outcome changed with ebb676daa1a3 ("bpf: Print function name in addition to function id"). Same as with e00c7b216f34 ("bpf: fix multiple issues in selftest suite and samples") issue 2), so just fix up the function name. Fixes: ebb676daa1a3 ("bpf: Print function name in addition to function id") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-17bpf: fix regression on verifier pruning wrt map lookupsDaniel Borkmann1-0/+28
Commit 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers") introduced a regression where existing programs stopped loading due to reaching the verifier's maximum complexity limit, whereas prior to this commit they were loading just fine; the affected program has roughly 2k instructions. What was found is that state pruning couldn't be performed effectively anymore due to mismatches of the verifier's register state, in particular in the id tracking. It doesn't mean that 57a09bf0a416 is incorrect per se, but rather that verifier needs to perform a lot more work for the same program with regards to involved map lookups. Since commit 57a09bf0a416 is only about tracking registers with type PTR_TO_MAP_VALUE_OR_NULL, the id is only needed to follow registers until they are promoted through pattern matching with a NULL check to either PTR_TO_MAP_VALUE or UNKNOWN_VALUE type. After that point, the id becomes irrelevant for the transitioned types. For UNKNOWN_VALUE, id is already reset to 0 via mark_reg_unknown_value(), but not so for PTR_TO_MAP_VALUE where id is becoming stale. It's even transferred further into other types that don't make use of it. Among others, one example is where UNKNOWN_VALUE is set on function call return with RET_INTEGER return type. states_equal() will then fall through the memcmp() on register state; note that the second memcmp() uses offsetofend(), so the id is part of that since d2a4dd37f6b4 ("bpf: fix state equivalence"). But the bisect pointed already to 57a09bf0a416, where we really reach beyond complexity limit. What I found was that states_equal() often failed in this case due to id mismatches in spilled regs with registers in type PTR_TO_MAP_VALUE. Unlike non-spilled regs, spilled regs just perform a memcmp() on their reg state and don't have any other optimizations in place, therefore also id was relevant in this case for making a pruning decision. We can safely reset id to 0 as well when converting to PTR_TO_MAP_VALUE. For the affected program, it resulted in a ~17 fold reduction of complexity and let the program load fine again. Selftest suite also runs fine. The only other place where env->id_gen is used currently is through direct packet access, but for these cases id is long living, thus a different scenario. Also, the current logic in mark_map_regs() is not fully correct when marking NULL branch with UNKNOWN_VALUE. We need to cache the destination reg's id in any case. Otherwise, once we marked that reg as UNKNOWN_VALUE, it's id is reset and any subsequent registers that hold the original id and are of type PTR_TO_MAP_VALUE_OR_NULL won't be marked UNKNOWN_VALUE anymore, since mark_map_reg() reuses the uncached regs[regno].id that was just overridden. Note, we don't need to cache it outside of mark_map_regs(), since it's called once on this_branch and the other time on other_branch, which are both two independent verifier states. A test case for this is added here, too. Fixes: 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-16Merge tag 'powerpc-4.10-1' of ↵Linus Torvalds53-337/+3307
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for the kexec_file_load() syscall, which is a prereq for secure and trusted boot. - Prevent kernel execution of userspace on P9 Radix (similar to SMEP/PXN). - Sort the exception tables at build time, to save time at boot, and store them as relative offsets to save space in the kernel image & memory. - Allow building the kernel with thin archives, which should allow us to build an allyesconfig once some other fixes land. - Build fixes to allow us to correctly rebuild when changing the kernel endian from big to little or vice versa. - Plumbing so that we can avoid doing a full mm TLB flush on P9 Radix. - Initial stack protector support (-fstack-protector). - Support for dumping the radix (aka. Linux) and hash page tables via debugfs. - Fix an oops in cxl coredump generation when cxl_get_fd() is used. - Freescale updates from Scott: "Highlights include 8xx hugepage support, qbman fixes/cleanup, device tree updates, and some misc cleanup." - Many and varied fixes and minor enhancements as always. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz, Christophe Jaillet, Christophe Leroy, Denis Kirjanov, Elimar Riesebieter, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Jack Miller, Johan Hovold, Lars-Peter Clausen, Libin, Madhavan Srinivasan, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin, Rashmica Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain" [ And thanks to Michael, who took time off from a new baby to get this pull request done. - Linus ] * tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (174 commits) powerpc/fsl/dts: add FMan node for t1042d4rdb powerpc/fsl/dts: add sg_2500_aqr105_phy4 alias on t1024rdb powerpc/fsl/dts: add QMan and BMan nodes on t1024 powerpc/fsl/dts: add QMan and BMan nodes on t1023 soc/fsl/qman: test: use DEFINE_SPINLOCK() powerpc/fsl-lbc: use DEFINE_SPINLOCK() powerpc/8xx: Implement support of hugepages powerpc: get hugetlbpage handling more generic powerpc: port 64 bits pgtable_cache to 32 bits powerpc/boot: Request no dynamic linker for boot wrapper soc/fsl/bman: Use resource_size instead of computation soc/fsl/qe: use builtin_platform_driver powerpc/fsl_pmc: use builtin_platform_driver powerpc/83xx/suspend: use builtin_platform_driver powerpc/ftrace: Fix the comments for ftrace_modify_code powerpc/perf: macros for power9 format encoding powerpc/perf: power9 raw event format encoding powerpc/perf: update attribute_group data structure powerpc/perf: factor out the event format field powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown ...
2016-12-16Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds3-9/+6
Pull virtio updates from Michael Tsirkin: "virtio, vhost: new device, fixes, speedups This includes the new virtio crypto device, and fixes all over the place. In particular enabling endian-ness checks for sparse builds found some bugs which this fixes. And it appears that everyone is in agreement that disabling endian-ness sparse checks shouldn't be necessary any longer. So this enables them for everyone, and drops the __CHECK_ENDIAN__ and __bitwise__ APIs. IRQ handling in virtio has been refactored somewhat, the larger switch to IRQ_SHARED will have to wait as it proved too aggressive" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits) Makefile: drop -D__CHECK_ENDIAN__ from cflags fs/logfs: drop __CHECK_ENDIAN__ Documentation/sparse: drop __CHECK_ENDIAN__ linux: drop __bitwise__ everywhere checkpatch: replace __bitwise__ with __bitwise Documentation/sparse: drop __bitwise__ tools: enable endian checks for all sparse builds linux/types.h: enable endian checks for all sparse builds virtio_mmio: Set dev.release() to avoid warning vhost: remove unused feature bit virtio_ring: fix description of virtqueue_get_buf vhost/scsi: Remove unused but set variable tools/virtio: use {READ,WRITE}_ONCE() in uaccess.h vringh: kill off ACCESS_ONCE() tools/virtio: fix READ_ONCE() crypto: add virtio-crypto driver vhost: cache used event for better performance vsock: lookup and setup guest_cid inside vhost_vsock_lock virtio_pci: split vp_try_to_find_vqs into INTx and MSI-X variants virtio_pci: merge vp_free_vectors into vp_del_vqs ...
2016-12-16Merge tag 'linux-kselftest-4.10-rc1-update' of ↵Linus Torvalds24-0/+1948
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: "This update consists of: - new tests to exercise the Sync Kernel Infrastructure. These tests are part of a battery of Android libsync tests and are re-written to test the new sync user-space interfaces from Emilio López, and Gustavo Padovan. - test to run hw-independent mock tests for i915.ko from Chris Wilson - a new gpio test case from Bamvor Jian Zhang - missing gitignore additions" * tag 'linux-kselftest-4.10-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftest/gpio: add gpio test case selftest: sync: improve assert() failure message kselftests: Exercise hw-independent mock tests for i915.ko selftests: add missing gitignore files/dirs selftests: add missing set-tz to timers .gitignore selftest: sync: stress test for merges selftest: sync: stress consumer/producer test selftest: sync: stress test for parallelism selftest: sync: wait tests for sw_sync framework selftest: sync: merge tests for sw_sync framework selftest: sync: fence tests for sw_sync framework selftest: sync: basic tests for sw_sync framework
2016-12-16tools: enable endian checks for all sparse buildsMichael S. Tsirkin1-4/+0
We dropped need for __CHECK_ENDIAN__ for linux, this mirrors this for tools. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-12-16tools/virtio: use {READ,WRITE}_ONCE() in uaccess.hMark Rutland1-4/+5
As a step towards killing off ACCESS_ONCE, use {READ,WRITE}_ONCE() for the virtio tools uaccess primitives, pulling these in from <linux/compiler.h>. With this done, we can kill off the now-unused ACCESS_ONCE() definition. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: linux-kernel@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2016-12-16tools/virtio: fix READ_ONCE()Mark Rutland1-1/+1
The virtio tools implementation of READ_ONCE() has a single parameter called 'var', but erroneously refers to 'val' for its cast, and thus won't work unless there's a variable of the correct type that happens to be called 'var'. Fix this with s/var/val/, making READ_ONCE() work as expected regardless. Fixes: a7c490333df3cff5 ("tools/virtio: use virt_xxx barriers") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: linux-kernel@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2016-12-16Merge tag 'trace-v4.10' of ↵Linus Torvalds7-7/+131
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "This release has a few updates: - STM can hook into the function tracer - Function filtering now supports more advance glob matching - Ftrace selftests updates and added tests - Softirq tag in traces now show only softirqs - ARM nop added to non traced locations at compile time - New trace_marker_raw file that allows for binary input - Optimizations to the ring buffer - Removal of kmap in trace_marker - Wakeup and irqsoff tracers now adhere to the set_graph_notrace file - Other various fixes and clean ups" * tag 'trace-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (42 commits) selftests: ftrace: Shift down default message verbosity kprobes/trace: Fix kprobe selftest for newer gcc tracing/kprobes: Add a helper method to return number of probe hits tracing/rb: Init the CPU mask on allocation tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results tracing/fgraph: Have wakeup and irqsoff tracers ignore graph functions too fgraph: Handle a case where a tracer ignores set_graph_notrace tracing: Replace kmap with copy_from_user() in trace_marker writing ftrace/x86_32: Set ftrace_stub to weak to prevent gcc from using short jumps to it tracing: Allow benchmark to be enabled at early_initcall() tracing: Have system enable return error if one of the events fail tracing: Do not start benchmark on boot up tracing: Have the reg function allow to fail ring-buffer: Force rb_end_commit() and rb_set_commit_to_write() inline ring-buffer: Froce rb_update_write_stamp() to be inlined ring-buffer: Force inline of hotpath helper functions tracing: Make __buffer_unlock_commit() always_inline tracing: Make tracepoint_printk a static_key ring-buffer: Always inline rb_event_data() ring-buffer: Make rb_reserve_next_event() always inlined ...
2016-12-15tools lib bpf: Add flags to bpf_create_map()Joe Stringer3-3/+5
Commit 6c905981743 ("bpf: pre-allocate hash map elements") introduces map_flags to bpf_attr for BPF_MAP_CREATE command. Expose this new parameter in libbpf. By exposing it, users can access flags such as whether or not to preallocate the map. Signed-off-by: Joe Stringer <joe@ovn.org> Acked-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Link: http://lkml.kernel.org/r/20161209024620.31660-4-joe@ovn.org [ Added clarifying comment made by Wang Nan ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15tools lib bpf: use __u32 from linux/types.hJoe Stringer2-4/+4
Fixes the following issue when building without access to 'u32' type: ./tools/lib/bpf/bpf.h:27:23: error: unknown type name ‘u32’ Signed-off-by: Joe Stringer <joe@ovn.org> Acked-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Link: http://lkml.kernel.org/r/20161209024620.31660-3-joe@ovn.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15tools lib bpf: Sync {tools,}/include/uapi/linux/bpf.hJoe Stringer1-229/+364
The tools version of this header is out of date; update it to the latest version from the kernel headers. Signed-off-by: Joe Stringer <joe@ovn.org> Acked-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Link: http://lkml.kernel.org/r/20161209024620.31660-2-joe@ovn.org [ Sync it harder, after merging with what was in net-next via perf/urgent via torvalds/master to get BPG_PROG_(AT|DE)TACH, etc ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf annotate: Fix jump target outside of function address rangeRavi Bangoria3-9/+15
If jump target is outside of function range, perf is not handling it correctly. Especially when target address is lesser than function start address, target offset will be negative. But, target address declared to be unsigned, converts negative number into 2's complement. See below example. Here target of 'jumpq' instruction at 34cf8 is 34ac0 which is lesser than function start address(34cf0). 34ac0 - 34cf0 = -0x230 = 0xfffffffffffffdd0 Objdump output: 0000000000034cf0 <__sigaction>: __GI___sigaction(): 34cf0: lea -0x20(%rdi),%eax 34cf3: cmp -bashx1,%eax 34cf6: jbe 34d00 <__sigaction+0x10> 34cf8: jmpq 34ac0 <__GI___libc_sigaction> 34cfd: nopl (%rax) 34d00: mov 0x386161(%rip),%rax # 3bae68 <_DYNAMIC+0x2e8> 34d07: movl -bashx16,%fs:(%rax) 34d0e: mov -bashxffffffff,%eax 34d13: retq perf annotate before applying patch: __GI___sigaction /usr/lib64/libc-2.22.so lea -0x20(%rdi),%eax cmp -bashx1,%eax v jbe 10 v jmpq fffffffffffffdd0 nop 10: mov _DYNAMIC+0x2e8,%rax movl -bashx16,%fs:(%rax) mov -bashxffffffff,%eax retq perf annotate after applying patch: __GI___sigaction /usr/lib64/libc-2.22.so lea -0x20(%rdi),%eax cmp -bashx1,%eax v jbe 10 ^ jmpq 34ac0 <__GI___libc_sigaction> nop 10: mov _DYNAMIC+0x2e8,%rax movl -bashx16,%fs:(%rax) mov -bashxffffffff,%eax retq Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Riyder <chris.ryder@arm.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1480953407-7605-3-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf annotate: Support jump instruction with target as second operandRavi Bangoria1-1/+5
Architectures like PowerPC have jump instructions that includes a target address as a second operand. For example, 'bne cr7,0xc0000000000f6154'. Add support for such instruction in perf annotate. objdump o/p: c0000000000f6140: ld r9,1032(r31) c0000000000f6144: cmpdi cr7,r9,0 c0000000000f6148: bne cr7,0xc0000000000f6154 c0000000000f614c: ld r9,2312(r30) c0000000000f6150: std r9,1032(r31) c0000000000f6154: ld r9,88(r31) Corresponding perf annotate o/p: Before patch: ld r9,1032(r31) cmpdi cr7,r9,0 v bne 3ffffffffff09f2c ld r9,2312(r30) std r9,1032(r31) 74: ld r9,88(r31) After patch: ld r9,1032(r31) cmpdi cr7,r9,0 v bne 74 ld r9,2312(r30) std r9,1032(r31) 74: ld r9,88(r31) Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Riyder <chris.ryder@arm.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1480953407-7605-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf record: Force ignore_missing_thread for uid optionJiri Olsa1-0/+3
Enable perf_evsel::ignore_missing_thread for -u option to ignore complete failure if any of the user's processes die between its enumeration and time we open the event. Committer notes: While doing a 'make -j4 allmodconfig' we sometimes get into the race: Before: # perf record -u acme Error: The sys_perf_event_open() syscall returned with 3 (No such process) for event (cycles:ppp). /bin/dmesg may provide additional information. No CONFIG_PERF_EVENTS=y kernel support configured? # After: [root@jouet ~]# perf record -u acme WARNING: Ignored open failure for pid 9888 WARNING: Ignored open failure for pid 18059 [root@jouet ~]# Which is an improvement, with the races not preventing the remaining threads for the specified user from being monitored, but the message probably needs further clarification. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481538943-21874-6-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf evsel: Allow to ignore missing pidJiri Olsa3-0/+46
Adding perf_evsel::ignore_missing_cpu_thread bool. When set true, it allows perf to ignore error of missing pid of perf event syscall. We remove missing thread id from the thread_map, so the rest of the processing like ioctl and mmap won't get disturbed with -1 fd. The reason for supporting this is to ease up monitoring group of pids, that 'disappear' before perf opens their event. This currently leads perf to report error and exit and makes perf record's -u option unusable under certain setup. With this change we will allow this race and ignore such failure with following warning: WARNING: Ignored open failure for pid 8605 Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20161213074622.GA3084@krava Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf thread_map: Add thread_map__remove functionJiri Olsa5-0/+72
Add thread_map__remove function to remove thread from thread map. Add automated test also. Committer notes: Testing it: # perf test "Remove thread map" 39: Remove thread map : Ok # perf test -v "Remove thread map" 39: Remove thread map : --- start --- test child forked, pid 4483 2 threads: 4482, 4483 1 thread: 4483 0 thread: test child finished with 0 ---- end ---- Remove thread map: Ok # Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481538943-21874-4-git-send-email-jolsa@kernel.org [ Added stdlib.h, to get the free() declaration ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf evsel: Use variable instead of repeating lengthy FD macroJiri Olsa1-8/+9
It's more readable and will ease up following patches. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481538943-21874-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf mem: Fix --all-user/--all-kernel optionsJiri Olsa1-2/+2
Removing extra '--' prefix. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: ad16511b0e40 ("perf mem: Add -U/-K (--all-user/--all-kernel) options") Link: http://lkml.kernel.org/r/1481538943-21874-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf tools: Remove some needless __maybe_unusedArnaldo Carvalho de Melo3-11/+10
I.e. those parameters/functions _are_ used, so ditch that misleading attribute. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-13cqtjh0yojg5gzvpq1zzpl0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf sched timehist: Show callchains for idle statNamhyung Kim1-0/+86
When --idle-hist option is used with --summary, it now shows idle stats with callchains like below: Idle stats by callchain: CPU 0: 902.195 msec Idle time (msec) Count Callchains ---------------- ------- -------------------------------------------------- 370.589 69 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath 178.799 17 worker_thread <- kthread <- ret_from_fork 128.352 17 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork 125.111 19 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select 71.599 50 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 23.146 1 rcu_gp_kthread <- kthread <- ret_from_fork 4.510 1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64 0.085 1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- do_restart_poll ... Committer notes: Extra testing: # uname -a Linux jouet 4.8.8-300.fc25.x86_64 #1 SMP Tue Nov 15 18:10:06 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux 1) Run 'perf sched record -g' 2) Run 'perf sched timehist --idle --summary' <SNIP> Idle stats by callchain: CPU 0: 13456.840 msec Idle time (msec) Count Callchains ---------------- ----- -------------------------------------------------- 5386.637 3283 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 2750.238 2299 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- do_syscall_64 1275.672 1287 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- entry_SYSCALL_64_fastpath 936.322 452 worker_thread <- kthread <- ret_from_fork 741.311 385 rcu_nocb_kthread <- kthread <- ret_from_fork 729.385 248 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_ppoll 365.386 229 irq_thread <- kthread <- ret_from_fork 338.934 265 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath 219.488 201 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork 186.839 410 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64 142.541 59 kvm_vcpu_block <- kvm_arch_vcpu_ioctl_run <- kvm_vcpu_ioctl <- do_vfs_ioctl <- sys_ioctl 83.887 92 smpboot_thread_fn <- kthread <- ret_from_fork 62.722 96 do_exit <- do_group_exit <- 0x2a5594 <- entry_SYSCALL_64_fastpath 47.894 83 pipe_wait <- pipe_read <- __vfs_read <- vfs_read <- sys_read 46.554 61 rcu_gp_kthread <- kthread <- ret_from_fork 34.337 21 schedule_timeout <- intel_fbc_work_fn <- process_one_work <- worker_thread <- kthread 29.521 14 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select 20.274 10 schedule_timeout <- io_schedule_timeout <- bit_wait_io <- __wait_on_bit <- out_of_line_wait_on_bit 15.085 55 schedule_timeout <- unix_stream_read_generic <- unix_stream_recvmsg <- sock_recvmsg <- SYSC_recvfrom <SNIP> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf sched timehist: Add -I/--idle-hist optionNamhyung Kim2-5/+45
The --idle-hist option is to analyze system idle state so which process makes cpu to go idle. If this option is specified, non-idle events will be skipped and processes switching to/from idle will be shown. This option is mostly useful when used with --summary(-only) option. In the idle-time summary view, idle time is accounted to previous thread which is run before idle task. The example output looks like following: Idle-time summary comm parent sched-out idle-time min-idle avg-idle max-idle stddev migrations (count) (msec) (msec) (msec) (msec) % -------------------------------------------------------------------------------------------- rcu_preempt[7] 2 95 550.872 0.011 5.798 23.146 7.63 0 migration/1[16] 2 1 15.558 15.558 15.558 15.558 0.00 0 khugepaged[39] 2 1 3.062 3.062 3.062 3.062 0.00 0 kworker/0:1H[124] 2 2 4.728 0.611 2.364 4.116 74.12 0 systemd-journal[167] 1 1 4.510 4.510 4.510 4.510 0.00 0 kworker/u16:3[558] 2 13 74.737 0.080 5.749 12.960 21.96 0 irq/34-iwlwifi[628] 2 21 118.403 0.032 5.638 23.990 24.00 0 kworker/u17:0[673] 2 1 3.523 3.523 3.523 3.523 0.00 0 dbus-daemon[722] 1 1 6.743 6.743 6.743 6.743 0.00 0 ifplugd[741] 1 1 58.826 58.826 58.826 58.826 0.00 0 wpa_supplicant[1490] 1 1 13.302 13.302 13.302 13.302 0.00 0 wpa_actiond[1492] 1 2 4.064 0.168 2.032 3.896 91.72 0 dockerd[1500] 1 1 0.055 0.055 0.055 0.055 0.00 0 ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-6-namhyung@kernel.org Link: http://lkml.kernel.org/r/20161213080632.19099-2-namhyung@kernel.org [ Merged fix sent by Namhyumg, as posted in the second Link: tag ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf sched timehist: Skip non-idle events when necessaryNamhyung Kim1-7/+18
Sometimes it only focuses on idle-related events like upcoming idle-hist feature. In this case we don't want to see other event to reduce noise. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf sched timehist: Save callchain when entering idleNamhyung Kim1-0/+30
In order to investigate the idleness reason, it is necessary to keep the callchains when entering idle. This can be identified by the sched:sched_switch event having the next_pid field as 0. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-4-namhyung@kernel.org Link: http://lkml.kernel.org/r/20161213080632.19099-1-namhyung@kernel.org [ Merged fix from Namhyung, see second Link: tag ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf sched timehist: Introduce struct idle_time_dataNamhyung Kim1-4/+33
The struct idle_time_data is to keep idle stats with callchains entering to the idle task. The normal thread_runtime calculation is done transparently since it extends the struct thread_runtime. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-3-namhyung@kernel.org [ Align struct field names ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf sched timehist: Split is_idle_sample()Namhyung Kim1-19/+20
The is_idle_sample() function actually does more than determining whether sample come from idle task. Split the callchain part into save_task_callchain() to make it clearer. Also checking prev_pid from trace data looks preferred than just checking sample->pid since it's possible, although rare, to have invalid 0 pid/tid on scheduling an exiting task. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-2-namhyung@kernel.org [ Remove some needless () in some return statements ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf tools: Move headers check into bash scriptJiri Olsa2-93/+60
To make it nicer and easily maintainable. Also moving the check into fixdep sub make, so its output is not scattered around the build output. Removing extra $$ from mman*.h checks. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481030331-31944-5-git-send-email-jolsa@kernel.org [ Use /bin/sh, and 'function check() {' -> 'check () {' to make it work with busybox, in Alpine Linux, for instance ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15redo: radix tree test suite: fix compilationMatthew Wilcox2-29/+1
[ This resurrects commit 53855d10f456, which was reverted in 2b41226b39b6. It depended on commit d544abd5ff7d ("lib/radix-tree: Convert to hotplug state machine") so now it is correct to apply ] Patch "lib/radix-tree: Convert to hotplug state machine" breaks the test suite as it adds a call to cpuhp_setup_state_nocalls() which is not currently emulated in the test suite. Add it, and delete the emulation of the old CPU hotplug mechanism. Link: http://lkml.kernel.org/r/1480369871-5271-36-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds24-302/+842
Merge more updates from Andrew Morton: - a few misc things - kexec updates - DMA-mapping updates to better support networking DMA operations - IPC updates - various MM changes to improve DAX fault handling - lots of radix-tree changes, mainly to the test suite. All leading up to reimplementing the IDA/IDR code to be a wrapper layer over the radix-tree. However the final trigger-pulling patch is held off for 4.11. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits) radix tree test suite: delete unused rcupdate.c radix tree test suite: add new tag check radix-tree: ensure counts are initialised radix tree test suite: cache recently freed objects radix tree test suite: add some more functionality idr: reduce the number of bits per level from 8 to 6 rxrpc: abstract away knowledge of IDR internals tpm: use idr_find(), not idr_find_slowpath() idr: add ida_is_empty radix tree test suite: check multiorder iteration radix-tree: fix replacement for multiorder entries radix-tree: add radix_tree_split_preload() radix-tree: add radix_tree_split radix-tree: add radix_tree_join radix-tree: delete radix_tree_range_tag_if_tagged() radix-tree: delete radix_tree_locate_item() radix-tree: improve multiorder iterators btrfs: fix race in btrfs_free_dummy_fs_info() radix-tree: improve dump output radix-tree: make radix_tree_find_next_bit more useful ...
2016-12-15radix tree test suite: delete unused rcupdate.cMatthew Wilcox1-86/+0
This file was used to implement call_rcu() before liburcu implemented that function. It hasn't even been compiled since before the test suite was added to the kernel. Remove it to reduce confusion. Link: http://lkml.kernel.org/r/1481667692-14500-5-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-15radix tree test suite: add new tag checkMatthew Wilcox1-0/+3
We have a check that setting a tag on a single entry at root succeeds, but we were missing a check that clearing a tag on that same entry also succeeds. Link: http://lkml.kernel.org/r/1481667692-14500-4-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-15radix-tree: ensure counts are initialisedMatthew Wilcox1-4/+41
radix_tree_join() was freeing nodes with a non-zero ->exceptional count, and radix_tree_split() wasn't zeroing ->exceptional when it allocated the new node. Fix this by making all callers of radix_tree_node_alloc() pass in the new counts (and some other always-initialised fields), which will prevent the problem recurring if in future we decide to do something similar. Link: http://lkml.kernel.org/r/1481667692-14500-3-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-15radix tree test suite: cache recently freed objectsMatthew Wilcox2-12/+41
The kmem_cache_alloc implementation simply allocates new memory from malloc() and calls the ctor, which zeroes out the entire object. This means it cannot spot bugs where the object isn't properly reinitialised before being freed. Add a small (11 objects) cache before freeing objects back to malloc. This is enough to let us write a test to catch it, although the memory allocator is now aware of the structure of the radix tree node, since it chains free objects through ->private_data (like the percpu cache does). Link: http://lkml.kernel.org/r/1481667692-14500-2-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 18:47:58 +0300