summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2021-03-29selftests: forwarding: Add tc-police tests for packets per secondBaowen Zheng2-0/+65
Test tc-police action for packets per second. The test is mainly in scenarios Rx policing and Tx policing. The test passes with veth pairs ports. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29selftests: tc-testing: add action police selftest for packets per secondBaowen Zheng1-0/+48
Add selftest cases in action police for packets per second. These tests depend on corresponding iproute2 command support. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-27selftests: mptcp: signal addresses testcasesGeliang Tang1-0/+58
This patch adds testcases for signalling multi valid and invalid addresses for both signal_address_tests and remove_tests. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-27selftests: mptcp: timeout testcases for multi addressesGeliang Tang1-2/+24
This patch added the timeout testcases for multi addresses, valid and invalid. These testcases need to transmit 8 ADD_ADDRs, so add a new speed level 'least' to set 10 to mptcp_connect to slow down the transmitting process. The original speed level 'slow' still uses 50. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-27selftests: mptcp: add cfg_do_w for cfg_removeGeliang Tang1-3/+7
In some testcases, we need to slow down the transmitting process. This patch added a new argument named cfg_do_w for cfg_remove to allow the caller to pass an argument to cfg_remove. In do_rnd_write, use this cfg_do_w to control the transmitting speed. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller34-523/+2968
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-03-24 The following pull-request contains BPF updates for your *net-next* tree. We've added 37 non-merge commits during the last 15 day(s) which contain a total of 65 files changed, 3200 insertions(+), 738 deletions(-). The main changes are: 1) Static linking of multiple BPF ELF files, from Andrii. 2) Move drop error path to devmap for XDP_REDIRECT, from Lorenzo. 3) Spelling fixes from various folks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller31-57/+920
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-2/+2
Merge misc fixes from Andrew Morton: "14 patches. Subsystems affected by this patch series: mm (hugetlb, kasan, gup, selftests, z3fold, kfence, memblock, and highmem), squashfs, ia64, gcov, and mailmap" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mailmap: update Andrey Konovalov's email address mm/highmem: fix CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP mm: memblock: fix section mismatch warning again kfence: make compatible with kmemleak gcov: fix clang-11+ support ia64: fix format strings for err_inject ia64: mca: allocate early mca with GFP_ATOMIC squashfs: fix xattr id and id lookup sanity checks squashfs: fix inode lookup sanity checks z3fold: prevent reclaim/free race for headless pages selftests/vm: fix out-of-tree build mm/mmu_notifiers: ensure range_end() is paired with range_start() kasan: fix per-page tags for non-page_alloc pages hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings
2021-03-25Merge tag 'arm64-fixes' of ↵Linus Torvalds1-5/+17
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Minor fixes all over, ranging from typos to tests to errata workarounds: - Fix possible memory hotplug failure with KASLR - Fix FFR value in SVE kselftest - Fix backtraces reported in /proc/$pid/stack - Disable broken CnP implementation on NVIDIA Carmel - Typo fixes and ACPI documentation clarification - Fix some W=1 warnings" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kernel: disable CNP on Carmel arm64/process.c: fix Wmissing-prototypes build warnings kselftest/arm64: sve: Do not use non-canonical FFR register value arm64: mm: correct the inside linear map range during hotplug check arm64: kdump: update ppos when reading elfcorehdr arm64: cpuinfo: Fix a typo Documentation: arm64/acpi : clarify arm64 support of IBFT arm64: stacktrace: don't trace arch_stack_walk() arm64: csum: cast to the proper type
2021-03-25selftests/vm: fix out-of-tree buildRong Chen1-2/+2
When building out-of-tree, attempting to make target from $(OUTPUT) directory: make[1]: *** No rule to make target '$(OUTPUT)/protection_keys.c', needed by '$(OUTPUT)/protection_keys_32'. Link: https://lkml.kernel.org/r/20210315094700.522753-1-rong.a.chen@intel.com Signed-off-by: Rong Chen <rong.a.chen@intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds17-45/+320
Pull networking fixes from David Miller: "Various fixes, all over: 1) Fix overflow in ptp_qoriq_adjfine(), from Yangbo Lu. 2) Always store the rx queue mapping in veth, from Maciej Fijalkowski. 3) Don't allow vmlinux btf in map_create, from Alexei Starovoitov. 4) Fix memory leak in octeontx2-af from Colin Ian King. 5) Use kvalloc in bpf x86 JIT for storing jit'd addresses, from Yonghong Song. 6) Fix tx ptp stats in mlx5, from Aya Levin. 7) Check correct ip version in tun decap, fropm Roi Dayan. 8) Fix rate calculation in mlx5 E-Switch code, from arav Pandit. 9) Work item memork leak in mlx5, from Shay Drory. 10) Fix ip6ip6 tunnel crash with bpf, from Daniel Borkmann. 11) Lack of preemptrion awareness in macvlan, from Eric Dumazet. 12) Fix data race in pxa168_eth, from Pavel Andrianov. 13) Range validate stab in red_check_params(), from Eric Dumazet. 14) Inherit vlan filtering setting properly in b53 driver, from Florian Fainelli. 15) Fix rtnl locking in igc driver, from Sasha Neftin. 16) Pause handling fixes in igc driver, from Muhammad Husaini Zulkifli. 17) Missing rtnl locking in e1000_reset_task, from Vitaly Lifshits. 18) Use after free in qlcnic, from Lv Yunlong. 19) fix crash in fritzpci mISDN, from Tong Zhang. 20) Premature rx buffer reuse in igb, from Li RongQing. 21) Missing termination of ip[a driver message handler arrays, from Alex Elder. 22) Fix race between "x25_close" and "x25_xmit"/"x25_rx" in hdlc_x25 driver, from Xie He. 23) Use after free in c_can_pci_remove(), from Tong Zhang. 24) Uninitialized variable use in nl80211, from Jarod Wilson. 25) Off by one size calc in bpf verifier, from Piotr Krysiuk. 26) Use delayed work instead of deferrable for flowtable GC, from Yinjun Zhang. 27) Fix infinite loop in NPC unmap of octeontx2 driver, from Hariprasad Kelam. 28) Fix being unable to change MTU of dwmac-sun8i devices due to lack of fifo sizes, from Corentin Labbe. 29) DMA use after free in r8169 with WoL, fom Heiner Kallweit. 30) Mismatched prototypes in isdn-capi, from Arnd Bergmann. 31) Fix psample UAPI breakage, from Ido Schimmel" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (171 commits) psample: Fix user API breakage math: Export mul_u64_u64_div_u64 ch_ktls: fix enum-conversion warning octeontx2-af: Fix memory leak of object buf ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation net: bridge: don't notify switchdev for local FDB addresses net/sched: act_ct: clear post_ct if doing ct_clear net: dsa: don't assign an error value to tag_ops isdn: capi: fix mismatched prototypes net/mlx5: SF, do not use ecpu bit for vhca state processing net/mlx5e: Fix division by 0 in mlx5e_select_queue net/mlx5e: Fix error path for ethtool set-priv-flag net/mlx5e: Offload tuple rewrite for non-CT flows net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDP net/mlx5: Add back multicast stats for uplink representor net: ipconfig: ic_dev can be NULL in ic_close_devs MAINTAINERS: Combine "QLOGIC QLGE 10Gb ETHERNET DRIVER" sections into one docs: networking: Fix a typo r8169: fix DMA being used after buffer free if WoL is enabled net: ipa: fix init header command validation ...
2021-03-25selftests: mlxsw: Add resilient nexthop groups configuration testsIdo Schimmel2-0/+87
Test that unsupported resilient nexthop group configurations are rejected and that offload / trap indication is correctly set on nexthop buckets in a resilient group. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25selftests: mlxsw: Test unresolved neigh trap with resilient nexthop groupsIdo Schimmel1-0/+31
The number of nexthop buckets in a resilient nexthop group never changes, so when the gateway address of a nexthop cannot be resolved, the nexthop buckets are programmed to trap packets to the CPU in order to trigger resolution. For example: # ip nexthop add id 1 via 198.51.100.1 dev swp3 # ip nexthop add id 10 group 1 type resilient buckets 32 # ip nexthop bucket get id 10 index 0 id 10 index 0 idle_time 1.44 nhid 1 trap Where 198.51.100.1 is a made-up IP. Test that in this case packets are indeed trapped to the CPU via the unresolved neigh trap. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-24selftests: netfilter: flowtable bridge and vlan supportPablo Neira Ayuso1-0/+82
This patch adds two new tests to cover bridge and vlan support: - Add a bridge device to the Router1 (nsr1) container and attach the veth0 device to the bridge. Set the IP address to the bridge device to exercise the bridge forwarding path. - Add vlan encapsulation between to the bridge device in the Router1 and one of the sender containers (ns1). Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-23Merge tag 'linux-kselftest-kunit-fixes-5.12-rc5.1' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fixes from Shuah Khan: "Two fixes to the kunit tool from David Gow" * tag 'linux-kselftest-kunit-fixes-5.12-rc5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: Disable PAGE_POISONING under --alltests kunit: tool: Fix a python tuple typing error
2021-03-23libbpf: Skip BTF fixup if object file has no BTFAndrii Nakryiko1-0/+3
Skip BTF fixup step when input object file is missing BTF altogether. Fixes: 8fd27bf69b86 ("libbpf: Add BPF static linker BTF and BTF.ext support") Reported-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/bpf/20210319205909.1748642-3-andrii@kernel.org
2021-03-22kselftest/arm64: sve: Do not use non-canonical FFR register valueAndre Przywara1-5/+17
The "First Fault Register" (FFR) is an SVE register that mimics a predicate register, but clears bits when a load or store fails to handle an element of a vector. The supposed usage scenario is to initialise this register (using SETFFR), then *read* it later on to learn about elements that failed to load or store. Explicit writes to this register using the WRFFR instruction are only supposed to *restore* values previously read from the register (for context-switching only). As the manual describes, this register holds only certain values, it: "... contains a monotonic predicate value, in which starting from bit 0 there are zero or more 1 bits, followed only by 0 bits in any remaining bit positions." Any other value is UNPREDICTABLE and is not supposed to be "restored" into the register. The SVE test currently tries to write a signature pattern into the register, which is *not* a canonical FFR value. Apparently the existing setups treat UNPREDICTABLE as "read-as-written", but a new implementation actually only stores canonical values. As a consequence, the sve-test fails immediately when comparing the FFR value: ----------- # ./sve-test Vector length: 128 bits PID: 207 Mismatch: PID=207, iteration=0, reg=48 Expected [cf00] Got [0f00] Aborted ----------- Fix this by only populating the FFR with proper canonical values. Effectively the requirement described above limits us to 17 unique values over 16 bits worth of FFR, so we condense our signature down to 4 bits (2 bits from the PID, 2 bits from the generation) and generate the canonical pattern from it. Any bits describing elements above the minimum 128 bit are set to 0. This aligns the FFR usage to the architecture and fixes the test on microarchitectures implementing FFR in a more restricted way. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviwed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210319120128.29452-1-andre.przywara@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller4-1/+122
Alexei Starovoitov says: ==================== pull-request: bpf 2021-03-20 The following pull-request contains BPF updates for your *net* tree. We've added 5 non-merge commits during the last 3 day(s) which contain a total of 8 files changed, 155 insertions(+), 12 deletions(-). The main changes are: 1) Use correct nops in fexit trampoline, from Stanislav. 2) Fix BTF dump, from Jean-Philippe. 3) Fix umd memory leak, from Zqiang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-20selftests/bpf: Add selftest for pointer-to-array-of-struct BTF dumpJean-Philippe Brucker1-0/+8
Bpftool used to issue forward declarations for a struct used as part of a pointer to array, which is invalid. Add a test to check that the struct is fully defined in this case: @@ -134,9 +134,9 @@ }; }; -struct struct_in_array {}; +struct struct_in_array; -struct struct_in_array_typed {}; +struct struct_in_array_typed; typedef struct struct_in_array_typed struct_in_array_t[2]; @@ -189,3 +189,7 @@ struct struct_with_embedded_stuff _14; }; +struct struct_in_array {}; + +struct struct_in_array_typed {}; + ... #13/1 btf_dump: syntax:FAIL Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210319112554.794552-3-jean-philippe@linaro.org
2021-03-20libbpf: Fix BTF dump of pointer-to-array-of-structJean-Philippe Brucker1-1/+1
The vmlinux.h generated from BTF is invalid when building drivers/phy/ti/phy-gmii-sel.c with clang: vmlinux.h:61702:27: error: array type has incomplete element type ‘struct reg_field’ 61702 | const struct reg_field (*regfields)[3]; | ^~~~~~~~~ bpftool generates a forward declaration for this struct regfield, which compilers aren't happy about. Here's a simplified reproducer: struct inner { int val; }; struct outer { struct inner (*ptr_to_array)[2]; } A; After build with clang -> bpftool btf dump c -> clang/gcc: ./def-clang.h:11:23: error: array has incomplete element type 'struct inner' struct inner (*ptr_to_array)[2]; Member ptr_to_array of struct outer is a pointer to an array of struct inner. In the DWARF generated by clang, struct outer appears before struct inner, so when converting BTF of struct outer into C, bpftool issues a forward declaration to struct inner. With GCC the DWARF info is reversed so struct inner gets fully defined. That forward declaration is not sufficient when compilers handle an array of the struct, even when it's only used through a pointer. Note that we can trigger the same issue with an intermediate typedef: struct inner { int val; }; typedef struct inner inner2_t[2]; struct outer { inner2_t *ptr_to_array; } A; Becomes: struct inner; typedef struct inner inner2_t[2]; And causes: ./def-clang.h:10:30: error: array has incomplete element type 'struct inner' typedef struct inner inner2_t[2]; To fix this, clear through_ptr whenever we encounter an intermediate array, to make the inner struct part of a strong link and force full declaration. Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210319112554.794552-2-jean-philippe@linaro.org
2021-03-20libbpf: Add explicit padding to btf_dump_emit_type_decl_optsKP Singh1-0/+1
Similar to https://lore.kernel.org/bpf/20210313210920.1959628-2-andrii@kernel.org/ When DECLARE_LIBBPF_OPTS is used with inline field initialization, e.g: DECLARE_LIBBPF_OPTS(btf_dump_emit_type_decl_opts, opts, .field_name = var_ident, .indent_level = 2, .strip_mods = strip_mods, ); and compiled in debug mode, the compiler generates code which leaves the padding uninitialized and triggers errors within libbpf APIs which require strict zero initialization of OPTS structs. Adding anonymous padding field fixes the issue. Fixes: 9f81654eebe8 ("libbpf: Expose BTF-to-C type declaration emitting API") Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: KP Singh <kpsingh@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210319192117.2310658-1-kpsingh@kernel.org
2021-03-19selftests: forwarding: vxlan_bridge_1d: Fix vxlan ecn decapsulate valueHangbin Liu1-1/+1
The ECN bit defines ECT(1) = 1, ECT(0) = 2. So inner 0x02 + outer 0x01 should be inner ECT(0) + outer ECT(1). Based on the description of __INET_ECN_decapsulate, the final decapsulate value should be ECT(1). So fix the test expect value to 0x01. Before the fix: TEST: VXLAN: ECN decap: 01/02->0x02 [FAIL] Expected to capture 10 packets, got 0. After the fix: TEST: VXLAN: ECN decap: 01/02->0x01 [ OK ] Fixes: a0b61f3d8ebf ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-19selftests: net: forwarding: Fix a typoBhaskar Chowdhury1-1/+1
s/verfied/verified/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-19selftests/bpf: Add multi-file statically linked BPF object file testAndrii Nakryiko4-3/+119
Add Makefile infra to specify multi-file BPF object files (and derivative skeletons). Add first selftest validating BPF static linker can merge together successfully two independent BPF object files and resulting object and skeleton are correct and usable. Use the same F(F(F(X))) = F(F(X)) identity test on linked object files as for the case of single BPF object files. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210318194036.3521577-13-andrii@kernel.org
2021-03-19selftests/bpf: Pass all BPF .o's through BPF static linkerAndrii Nakryiko1-5/+6
Pass all individual BPF object files (generated from progs/*.c) through `bpftool gen object` command to validate that BPF static linker doesn't corrupt them. As an additional sanity checks, validate that passing resulting object files through linker again results in identical ELF files. Exact same ELF contents can be guaranteed only after two passes, as after the first pass ELF sections order changes, and thus .BTF.ext data sections order changes. That, in turn, means that strings are added into the final BTF string sections in different order, so .BTF strings data might not be exactly the same. But doing another round of linking afterwards should result in the identical ELF file, which is checked with additional `diff` command. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210318194036.3521577-12-andrii@kernel.org
2021-03-19selftests/bpf: Re-generate vmlinux.h and BPF skeletons if bpftool changedAndrii Nakryiko1-2/+3
Trigger vmlinux.h and BPF skeletons re-generation if detected that bpftool was re-compiled. Otherwise full `make clean` is required to get updated skeletons, if bpftool is modified. Fixes: acbd06206bbb ("selftests/bpf: Add vmlinux.h selftest exercising tracing of syscalls") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210318194036.3521577-11-andrii@kernel.org
2021-03-19bpftool: Add `gen object` command to perform BPF static linkingAndrii Nakryiko3-16/+100
Add `bpftool gen object <output-file> <input_file>...` command to statically link multiple BPF ELF object files into a single output BPF ELF object file. This patch also updates bash completions and man page. Man page gets a short section on `gen object` command, but also updates the skeleton example to show off workflow for BPF application with two .bpf.c files, compiled individually with Clang, then resulting object files are linked together with `gen object`, and then final object file is used to generate usable BPF skeleton. This should help new users understand realistic workflow w.r.t. compiling mutli-file BPF application. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20210318194036.3521577-10-andrii@kernel.org
2021-03-19bpftool: Add ability to specify custom skeleton object nameAndrii Nakryiko3-9/+44
Add optional name OBJECT_NAME parameter to `gen skeleton` command to override default object name, normally derived from input file name. This allows much more flexibility during build time. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210318194036.3521577-9-andrii@kernel.org
2021-03-19libbpf: Add BPF static linker BTF and BTF.ext supportAndrii Nakryiko1-2/+767
Add .BTF and .BTF.ext static linking logic. When multiple BPF object files are linked together, their respective .BTF and .BTF.ext sections are merged together. BTF types are not just concatenated, but also deduplicated. .BTF.ext data is grouped by type (func info, line info, core_relos) and target section names, and then all the records are concatenated together, preserving their relative order. All the BTF type ID references and string offsets are updated as necessary, to take into account possibly deduplicated strings and types. BTF DATASEC types are handled specially. Their respective var_secinfos are accumulated separately in special per-section data and then final DATASEC types are emitted at the very end during bpf_linker__finalize() operation, just before emitting final ELF output file. BTF data can also provide "section annotations" for some extern variables. Such concept is missing in ELF, but BTF will have DATASEC types for such special extern datasections (e.g., .kconfig, .ksyms). Such sections are called "ephemeral" internally. Internally linker will keep metadata for each such section, collecting variables information, but those sections won't be emitted into the final ELF file. Also, given LLVM/Clang during compilation emits BTF DATASECS that are incomplete, missing section size and variable offsets for static variables, BPF static linker will initially fix up such DATASECs, using ELF symbols data. The final DATASECs will preserve section sizes and all variable offsets. This is handled correctly by libbpf already, so won't cause any new issues. On the other hand, it's actually a nice property to have a complete BTF data without runtime adjustments done during bpf_object__open() by libbpf. In that sense, BPF static linker is also a BTF normalizer. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210318194036.3521577-8-andrii@kernel.org
2021-03-19libbpf: Add BPF static linker APIsAndrii Nakryiko6-11/+1215
Introduce BPF static linker APIs to libbpf. BPF static linker allows to perform static linking of multiple BPF object files into a single combined resulting object file, preserving all the BPF programs, maps, global variables, etc. Data sections (.bss, .data, .rodata, .maps, maps, etc) with the same name are concatenated together. Similarly, code sections are also concatenated. All the symbols and ELF relocations are also concatenated in their respective ELF sections and are adjusted accordingly to the new object file layout. Static variables and functions are handled correctly as well, adjusting BPF instructions offsets to reflect new variable/function offset within the combined ELF section. Such relocations are referencing STT_SECTION symbols and that stays intact. Data sections in different files can have different alignment requirements, so that is taken care of as well, adjusting sizes and offsets as necessary to satisfy both old and new alignment requirements. DWARF data sections are stripped out, currently. As well as LLLVM_ADDRSIG section, which is ignored by libbpf in bpf_object__open() anyways. So, in a way, BPF static linker is an analogue to `llvm-strip -g`, which is a pretty nice property, especially if resulting .o file is then used to generate BPF skeleton. Original string sections are ignored and instead we construct our own set of unique strings using libbpf-internal `struct strset` API. To reduce the size of the patch, all the .BTF and .BTF.ext processing was moved into a separate patch. The high-level API consists of just 4 functions: - bpf_linker__new() creates an instance of BPF static linker. It accepts output filename and (currently empty) options struct; - bpf_linker__add_file() takes input filename and appends it to the already processed ELF data; it can be called multiple times, one for each BPF ELF object file that needs to be linked in; - bpf_linker__finalize() needs to be called to dump final ELF contents into the output file, specified when bpf_linker was created; after bpf_linker__finalize() is called, no more bpf_linker__add_file() and bpf_linker__finalize() calls are allowed, they will return error; - regardless of whether bpf_linker__finalize() was called or not, bpf_linker__free() will free up all the used resources. Currently, BPF static linker doesn't resolve cross-object file references (extern variables and/or functions). This will be added in the follow up patch set. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210318194036.3521577-7-andrii@kernel.org
2021-03-19libbpf: Add generic BTF type shallow copy APIAndrii Nakryiko3-0/+51
Add btf__add_type() API that performs shallow copy of a given BTF type from the source BTF into the destination BTF. All the information and type IDs are preserved, but all the strings encountered are added into the destination BTF and corresponding offsets are rewritten. BTF type IDs are assumed to be correct or such that will be (somehow) modified afterwards. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210318194036.3521577-6-andrii@kernel.org
2021-03-19libbpf: Extract internal set-of-strings datastructure APIsAndrii Nakryiko4-195/+259
Extract BTF logic for maintaining a set of strings data structure, used for BTF strings section construction in writable mode, into separate re-usable API. This data structure is going to be used by bpf_linker to maintains ELF STRTAB section, which has the same layout as BTF strings section. Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210318194036.3521577-5-andrii@kernel.org
2021-03-19libbpf: Rename internal memory-management helpersAndrii Nakryiko4-21/+21
Rename btf_add_mem() and btf_ensure_mem() helpers that abstract away details of dynamically resizable memory to use libbpf_ prefix, as they are not BTF-specific. No functional changes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210318194036.3521577-4-andrii@kernel.org
2021-03-19libbpf: Generalize BTF and BTF.ext type ID and strings iterationAndrii Nakryiko2-172/+228
Extract and generalize the logic to iterate BTF type ID and string offset fields within BTF types and .BTF.ext data. Expose this internally in libbpf for re-use by bpf_linker. Additionally, complete strings deduplication handling for BTF.ext (e.g., CO-RE access strings), which was previously missing. There previously was no case of deduplicating .BTF.ext data, but bpf_linker is going to use it. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210318194036.3521577-3-andrii@kernel.org
2021-03-19libbpf: Expose btf_type_by_id() internallyAndrii Nakryiko2-1/+6
btf_type_by_id() is internal-only convenience API returning non-const pointer to struct btf_type. Expose it outside of btf.c for re-use. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210318194036.3521577-2-andrii@kernel.org
2021-03-18selftests: kvm: add set_boot_cpu_id testEmanuele Giuseppe Esposito3-0/+168
Test for the KVM_SET_BOOT_CPU_ID ioctl. Check that it correctly allows to change the BSP vcpu. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20210318151624.490861-2-eesposit@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18selftests: kvm: add _vm_ioctlEmanuele Giuseppe Esposito2-1/+7
As in kvm_ioctl and _kvm_ioctl, add the respective _vm_ioctl for vm_ioctl. _vm_ioctl invokes an ioctl using the vm fd, leaving the caller to test the result. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20210318151624.490861-1-eesposit@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18selftests: kvm: add get_msr_index_featuresEmanuele Giuseppe Esposito5-2/+137
Test the KVM_GET_MSR_FEATURE_INDEX_LIST and KVM_GET_MSR_INDEX_LIST ioctls. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20210318145629.486450-1-eesposit@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18selftest/bpf: Add a test to check trampoline freeing logic.Alexei Starovoitov2-0/+113
Add a selftest for commit e21aa341785c ("bpf: Fix fexit trampoline.") to make sure that attaching fexit prog to a sleeping kernel function will trigger appropriate trampoline and program destruction. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210318004523.55908-1-alexei.starovoitov@gmail.com
2021-03-18selftests: kvm: Add basic Hyper-V clocksources testsVitaly Kuznetsov3-0/+262
Introduce a new selftest for Hyper-V clocksources (MSR-based reference TSC and TSC page). As a starting point, test the following: 1) Reference TSC is 1Ghz clock. 2) Reference TSC and TSC page give the same reading. 3) TSC page gets updated upon KVM_SET_CLOCK call. 4) TSC page does not get updated when guest opted for reenlightenment. 5) Disabled TSC page doesn't get updated. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210318140949.1065740-1-vkuznets@redhat.com> [Add a host-side test using TSC + KVM_GET_MSR too. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18selftests/bpf: drop custom NULL #define in skb_pkt_end selftestAndrii Nakryiko1-1/+0
Now that bpftool generates NULL definition as part of vmlinux.h, drop custom NULL definition in skb_pkt_end.c. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20210317200510.1354627-3-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-03-18libbpf: provide NULL and KERNEL_VERSION macros in bpf_helpers.hAndrii Nakryiko1-1/+15
Given that vmlinux.h is not compatible with headers like stddef.h, NULL poses an annoying problem: it is defined as #define, so is not captured in BTF, so is not emitted into vmlinux.h. This leads to users either sticking to explicit 0, or defining their own NULL (as progs/skb_pkt_end.c does). But it's easy for bpf_helpers.h to provide (conditionally) NULL definition. Similarly, KERNEL_VERSION is another commonly missed macro that came up multiple times. So this patch adds both of them, along with offsetof(), that also is typically defined in stddef.h, just like NULL. This might cause compilation warning for existing BPF applications defining their own NULL and/or KERNEL_VERSION already: progs/skb_pkt_end.c:7:9: warning: 'NULL' macro redefined [-Wmacro-redefined] #define NULL 0 ^ /tmp/linux/tools/testing/selftests/bpf/tools/include/vmlinux.h:4:9: note: previous definition is here #define NULL ((void *)0) ^ It is trivial to fix, though, so long-term benefits outweight temporary inconveniences. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20210317200510.1354627-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller7-16/+64
Daniel Borkmann says: ==================== pull-request: bpf 2021-03-18 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 4 day(s) which contain a total of 14 files changed, 336 insertions(+), 94 deletions(-). The main changes are: 1) Fix fexit/fmod_ret trampoline for sleepable programs, and also fix a ftrace splat in modify_ftrace_direct() on address change, from Alexei Starovoitov. 2) Fix two oob speculation possibilities that allows unprivileged to leak mem via side-channel, from Piotr Krysiuk and Daniel Borkmann. 3) Fix libbpf's netlink handling wrt SOCK_CLOEXEC, from Kumar Kartikeya Dwivedi. 4) Fix libbpf's error handling on failure in getting section names, from Namhyung Kim. 5) Fix tunnel collect_md BPF selftest wrt Geneve option handling, from Hangbin Liu. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18libbpf: Use SOCK_CLOEXEC when opening the netlink socketKumar Kartikeya Dwivedi1-1/+1
Otherwise, there exists a small window between the opening and closing of the socket fd where it may leak into processes launched by some other thread. Fixes: 949abbe88436 ("libbpf: add function to setup XDP") Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20210317115857.6536-1-memxor@gmail.com
2021-03-18libbpf: Fix error path in bpf_object__elf_init()Namhyung Kim1-1/+2
When it failed to get section names, it should call into bpf_object__elf_finish() like others. Fixes: 88a82120282b ("libbpf: Factor out common ELF operations and improve logging") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210317145414.884817-1-namhyung@kernel.org
2021-03-17bpf, selftests: Fix up some test_verifier cases for unprivilegedPiotr Krysiuk4-10/+59
Fix up test_verifier error messages for the case where the original error message changed, or for the case where pointer alu errors differ between privileged and unprivileged tests. Also, add alternative tests for keeping coverage of the original verifier rejection error message (fp alu), and newly reject map_ptr += rX where rX == 0 given we now forbid alu on these types for unprivileged. All test_verifier cases pass after the change. The test case fixups were kept separate to ease backporting of core changes. Signed-off-by: Piotr Krysiuk <piotras@gmail.com> Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-03-17selftests: mlxsw: spectrum-2: Remove q_in_vni_veto testAmit Cohen1-77/+0
q_in_vni_veto.sh is not needed anymore because VxLAN with an 802.1ad bridge and VxLAN with an 802.1d bridge can coexist. Remove the test. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-17selftests: forwarding: Add test for dual VxLAN bridgeAmit Cohen1-0/+366
Configure VxLAN with an 802.1ad bridge and VxLAN with an 802.1d bridge at the same time in same switch, verify that traffic passed as expected. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-17selftests/bpf: Use nanosleep() syscall instead of sleep() in get_cgroup_idRavi Bangoria1-1/+5
Glibc's sleep() switched to clock_nanosleep() from nanosleep(), and thus syscalls:sys_enter_nanosleep tracepoint is not hitting which is causing testcase failure. Instead of depending on glibc sleep(), call nanosleep() systemcall directly. Before: # ./get_cgroup_id_user ... main:FAIL:compare_cgroup_id kern cgid 0 user cgid 483 After: # ./get_cgroup_id_user ... main:PASS:compare_cgroup_id Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210316153048.136447-1-ravi.bangoria@linux.ibm.com
2021-03-17selftests/bpf: Fix warning comparing pointer to 0Jiapeng Chong1-2/+2
Fix the following coccicheck warnings: ./tools/testing/selftests/bpf/progs/fexit_test.c:77:15-16: WARNING comparing pointer to 0. ./tools/testing/selftests/bpf/progs/fexit_test.c:68:12-13: WARNING comparing pointer to 0. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/1615881577-3493-1-git-send-email-jiapeng.chong@linux.alibaba.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 01:11:52 +0300