Age | Commit message (Collapse) | Author | Files | Lines |
|
The -f option is to filter out the information of blocks whose memory has
not been released, I noticed some blocks should not be filtered out.
Commit 9cc7e96aa846 ("mm/page_owner: record timestamp and pid") records
the allocation timestamp (ts_nsec) of all pages.
Commit 866b48526217 ("mm/page_owner: record the timestamp of all pages
during free") records the free timestamp (free_ts_nsec) of all pages.
When the page is allocated for the first time, the initial value of
free_ts_nsec is 0, and the corresponding time will be obtained when the
page is released. But during reallocation the free_ts_nsec will not reset
to 0 again. In particular, when page migration occurs, these two
timestamps will be the same.
Now page_owner_sort removes all text blocks whose free_ts_nsec is not 0
when using -f option. However, this way can only select pages allocated
for the first time. If a freed page is reallocated, free_ts_nsec will be
less than ts_nsec; if page migration occurs, the two timestamps will be
equal. These cases should be considered as pages are not released.
So I fix the function is_need() to keep text blocks that meet the above
two conditions when using -f option.
Link: https://lkml.kernel.org/r/20220812155515.30846-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Georgi Djakov <georgi.djakov@linaro.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
|
|
I noticed one more indentation than necessary in is_need().
Link: https://lkml.kernel.org/r/20220717195506.7602-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 64dd68497be76 relocated and renamed the alloc_calls and
free_calls files from /sys/kernel/slab/NAME/*_calls over to
/sys/kernel/debug/slab/NAME/*_calls but didn't update the slabinfo tool
with the new location.
This change will now have slabinfo look at the new location (and filenames)
with a fallback to the prior files.
Fixes: 64dd68497be76 ("mm: slub: move sysfs slab alloc/free interfaces to debugfs")
Cc: stable@vger.kernel.org
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Tested-by: Stéphane Graber <stgraber@ubuntu.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
so it will be consistent with code mm directory and with
Documentation/admin-guide/mm and won't be confused with virtual machines.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Wu XiangCheng <bobwxc@email.cn>
|
|
When the number of partial slabs in each cache is the same (e.g., the
value are 0), the results of the `slabinfo -X -N5` and `slabinfo -P -N5`
are different.
/ # slabinfo -X -N5
...
Slabs sorted by number of partial slabs
---------------------------------------
Name Objects Objsize Space Slabs/Part/Cpu O/S O %Fr %Ef Flg
inode_cache 15180 392 6217728 758/0/1 20 1 0 95 a
kernfs_node_cache 22494 88 2002944 488/0/1 46 0 0 98
shmem_inode_cache 663 464 319488 38/0/1 17 1 0 96
biovec-max 50 3072 163840 4/0/1 10 3 0 93 A
dentry 19050 136 2600960 633/0/2 30 0 0 99 a
/ # slabinfo -P -N5
Name Objects Objsize Space Slabs/Part/Cpu O/S O %Fr %Ef Flg
bdev_cache 32 984 32.7K 1/0/1 16 2 0 96 Aa
ext4_inode_cache 42 752 32.7K 1/0/1 21 2 0 96 a
dentry 19050 136 2.6M 633/0/2 30 0 0 99 a
TCPv6 17 1840 32.7K 0/0/1 17 3 0 95 A
RAWv6 18 856 16.3K 0/0/1 18 2 0 94 A
This problem is caused by the sort_slabs(). So let's use alphabetic order
when two values are equal in the sort_slabs().
By the way, the content of the `slabinfo -h` is not aligned because the
`-P|--partial Sort by number of partial slabs`
uses tabs instead of spaces. So let's use spaces instead of tabs to fix
it.
Link: https://lkml.kernel.org/r/20220528063117.935158-1-songyuanzheng@huawei.com
Fixes: 1106b205a3fe ("tools/vm/slabinfo: add partial slab listing to -X")
Signed-off-by: Yuanzheng Song <songyuanzheng@huawei.com>
Cc: "Tobin C. Harding" <tobin@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The basic question we would like to have a reliable and efficient answer
to is: is this anonymous page exclusive to a single process or might it be
shared? We need that information for ordinary/single pages, hugetlb
pages, and possibly each subpage of a THP.
Introduce a way to mark an anonymous page as exclusive, with the ultimate
goal of teaching our COW logic to not do "wrong COWs", whereby GUP pins
lose consistency with the pages mapped into the page table, resulting in
reported memory corruptions.
Most pageflags already have semantics for anonymous pages, however,
PG_mappedtodisk should never apply to pages in the swapcache, so let's
reuse that flag.
As PG_has_hwpoisoned also uses that flag on the second tail page of a
compound page, convert it to PG_error instead, which is marked as
PF_NO_TAIL, so never used for tail pages.
Use custom page flag modification functions such that we can do additional
sanity checks. The semantics we'll put into some kernel doc in the future
are:
"
PG_anon_exclusive is *usually* only expressive in combination with a
page table entry. Depending on the page table entry type it might
store the following information:
Is what's mapped via this page table entry exclusive to the
single process and can be mapped writable without further
checks? If not, it might be shared and we might have to COW.
For now, we only expect PTE-mapped THPs to make use of
PG_anon_exclusive in subpages. For other anonymous compound
folios (i.e., hugetlb), only the head page is logically mapped and
holds this information.
For example, an exclusive, PMD-mapped THP only has PG_anon_exclusive
set on the head page. When replacing the PMD by a page table full
of PTEs, PG_anon_exclusive, if set on the head page, will be set on
all tail pages accordingly. Note that converting from a PTE-mapping
to a PMD mapping using the same compound page is currently not
possible and consequently doesn't require care.
If GUP wants to take a reliable pin (FOLL_PIN) on an anonymous page,
it should only pin if the relevant PG_anon_exclusive is set. In that
case, the pin will be fully reliable and stay consistent with the pages
mapped into the page table, as the bit cannot get cleared (e.g., by
fork(), KSM) while the page is pinned. For anonymous pages that
are mapped R/W, PG_anon_exclusive can be assumed to always be set
because such pages cannot possibly be shared.
The page table lock protecting the page table entry is the primary
synchronization mechanism for PG_anon_exclusive; GUP-fast that does
not take the PT lock needs special care when trying to clear the
flag.
Page table entry types and PG_anon_exclusive:
* Present: PG_anon_exclusive applies.
* Swap: the information is lost. PG_anon_exclusive was cleared.
* Migration: the entry holds this information instead.
PG_anon_exclusive was cleared.
* Device private: PG_anon_exclusive applies.
* Device exclusive: PG_anon_exclusive applies.
* HW Poison: PG_anon_exclusive is stale and not changed.
If the page may be pinned (FOLL_PIN), clearing PG_anon_exclusive is
not allowed and the flag will stick around until the page is freed
and folio->mapping is cleared.
"
We won't be clearing PG_anon_exclusive on destructive unmapping (i.e.,
zapping) of page table entries, page freeing code will handle that when
also invalidate page->mapping to not indicate PageAnon() anymore. Letting
information about exclusivity stick around will be an important property
when adding sanity checks to unpinning code.
Note that we properly clear the flag in free_pages_prepare() via
PAGE_FLAGS_CHECK_AT_PREP for each individual subpage of a compound page,
so there is no need to manually clear the flag.
Link: https://lkml.kernel.org/r/20220428083441.37290-12-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
I noticed a detail that needs to be adjusted. When judging whether a page
is allocated by vmalloc, the value of the variable "tmp" was repeatedly
judged, so the code was adjusted.
This work is coauthored by Yinan Zhang, Jiajian Ye, Shenghong Han, Chongxi
Zhao, Yuhong Feng and Yongqiang Liu.
Link: https://lkml.kernel.org/r/20220414042744.13896-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Haowen Bai <baihaowen@meizu.com>
Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Yongqiang Liu <liuyongqiang13@huawei.com>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
and --sort options
An application is suspected of having memory leak when its memory
consumption is high and keeps increasing. There are several commonly used
memory allocators: slab, cma, vmalloc, etc. The memory leak
identification can be sped up if the page information allocated by an
allocator can be analyzed separately.
This patch provides supports for memory allocator labelling for slab,
vmalloc, and cma. The pages allocated by slab and cma can be confirmed
from the "PFN" line according to the kernel codes, and the label of the
vmalloc allocator can be obtained by analyzing the stack trace. Thanks
for Vlastimil Babka's constructive suggestions.
Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() ->
... -> __vmalloc_node_range() -> __vmalloc_area_node().
__vmalloc_area_node() requests memory through the interface of buddy
allocation system. In the current version, __vmalloc_area_node() uses
four interfaces: alloc_pages_bulk_array_mempolicy(),
alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By
disassembling the code, we find that __vmalloc_area_node() is expanded in
__vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace.
On the test machine, the stack trace of pages allocated by vmalloc has the
following four forms:
__alloc_pages_bulk+0x230/0x6a0
__vmalloc_node_range+0x19c/0x598
alloc_pages_bulk_array_mempolicy+0xbc/0x278
__vmalloc_node_range+0x1e8/0x598
__alloc_pages+0x160/0x2b0
__vmalloc_node_range+0x234/0x598
alloc_pages+0xac/0x150
__vmalloc_node_range+0x44c/0x598
Therefore, in two consecutive lines of stacktrace, if the first line
contains the word "alloc_pages" and the second line contains the word
"__vmalloc_node_range", it can be determined that the page is allocated by
vmalloc. And the function offset and size are not the same on different
machines, so there is no need to match them.
At the same time, this patch updates the --cull and --sort options to
support allocator-based merge statistics and sorting. The added functions
are fully compatible with the original work. When using, you can use
"allocator", or abbreviated as "ator". Relevant updates have also been
made in the documentation(Documentation/vm/page_owner.rst).
Example:
./page_owner_sort <input> <output> --cull=st,pid,name,allocator
./page_owner_sort <input> <output> --sort=ator,pid,name
This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han,
Chongxi Zhao, Yuhong Feng and Yongqiang Liu.
Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Haowen Bai <baihaowen@meizu.com>
Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Yongqiang Liu <liuyongqiang13@huawei.com>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As normal usage, tool will print huge parser log and spend a lot of time
printing, so it would be preferable add "-d" debug control to avoid this
problem.
Link: https://lkml.kernel.org/r/1649672446-5685-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Yongqiang Liu <liuyongqiang13@huawei.com>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Cc: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When viewing page owner information, we may want to sort blocks of
information by multiple keys, since one single key does not uniquely
identify a block. Therefore, following adjustments are made:
1. Add a new --sort option to support sorting blocks of information by
multiple keys.
./page_owner_sort <input> <output> --sort=<order>
./page_owner_sort <input> <output> --sort <order>
<order> is a single argument in the form of a comma-separated list,
which offers a way to specify sorting order.
Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending
order can be specified by adding the + (ascending, default) or - (descend
-ing) prefix to the key:
./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3...
For example, to sort the blocks first by task command name in lexicographic
order and then by pid in ascending numerical order, use the following:
./page_owner_sort <input> <output> --sort=name,+pid
To sort the blocks first by pid in ascending order and then by timestamp
of the page when it is allocated in descending order, use the following:
./page_owner_sort <input> <output> --sort=pid,-alloc_ts
2. Add explanations of a newly added --sort option in the function usage()
and the document(Documentation/vm/page_owner.rst).
This work is coauthored by
Yixuan Cao
Shenghong Han
Yinan Zhang
Chongxi Zhao
Yuhong Feng
Yongqiang Liu
Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn
Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Yongqiang Liu <liuyongqiang13@huawei.com>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Cc: Haowen Bai <baihaowen@meizu.com>
Cc: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When viewing page owner information, we may want to select blocks whose
PID/TGID/TASK_COMM_NAME appears in a user-specified list for data analysis
and aggregation. But currently page_owner_sort only supports selecting
blocks associated with only one specified PID/TGID/TASK_COMM_NAME.
Therefore, following adjustments are made to fix the problem:
1. Enhance selecting function to support the selection of multiple
PIDs/TGIDs/TASK_COMM_NAMEs.
The enhanced usages are as follows:
--pid <pidlist> Select by pid. This selects the blocks whose PID
numbers appear in <pidlist>.
--tgid <tgidlist> Select by tgid. This selects the blocks whose
TGID numbers appear in <tgidlist>.
--name <cmdlist> Select by task command name. This selects the
blocks whose task command name appear in <cmdlist>.
Where <pidlist>, <tgidlist>, <cmdlist> are single arguments in the form of
a comma-separated list,which offers a way to specify individual selecting
rules.
For example, if you want to select blocks whose tgids are 1, 2 or 3, you
have to use 4 commands as follows:
./page_owner_sort <input> <output1> --tgid=1
./page_owner_sort <input> <output2> --tgid=2
./page_owner_sort <input> <output3> --tgid=3
cat <output1> <output2> <output3> > <output>
With this patch, you can use only 1 command to obtain the same result as
above:
./page_owner_sort <input> <output1> --tgid=1,2,3
2. Update explanations of --pid, --tgid and --name in the function
usage() and the document(Documents/vm/page_owner.rst).
This work is coauthored by
Yixuan Cao
Shenghong Han
Yinan Zhang
Chongxi Zhao
Yuhong Feng
Yongqiang Liu
Link: https://lkml.kernel.org/r/20220401024856.767-2-yejiajian2018@email.szu.edu.cn
Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Yongqiang Liu <liuyongqiang13@huawei.com>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Cc: Haowen Bai <baihaowen@meizu.com>
Cc: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Error messages should be send to stderr using fprintf() instead of
printf().
This work is coauthored by
Yixuan Cao
Shenghong Han
Yinan Zhang
Chongxi Zhao
Yuhong Feng
Yongqiang Liu
Link: https://lkml.kernel.org/r/20220401024856.767-1-yejiajian2018@email.szu.edu.cn
Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Cc: Yongqiang Liu <liuyongqiang13@huawei.com>
Cc: Haowen Bai <baihaowen@meizu.com>
Cc: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The -c option is used to cull by stacktrace. Now, --cull option has
been Added in page_owner_sort.c. Culling by stacktrace is one of the
function of "--cull". No need to set an extra parameter. So remove -c
option.
Remove parsing of -c when parse parameter and remove "-c" from usage.
This work is coauthored by
Shenghong Han
Yixuan Cao
Chongxi Zhao
Jiajian Ye
Yuhong Feng
Yongqiang Liu
Link: https://lkml.kernel.org/r/20220326085920.1470081-1-zhangyinan2019@email.szu.edu.cn
Signed-off-by: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Georgi Djakov <georgi.djakov@linaro.org>
Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Yongqiang Liu <liuyongqiang13@huawei.com>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When viewing page owner information, we may want to cull blocks of
information with our own rules. So it is important to enhance culling
function to provide the support for customizing culling rules.
Therefore, following adjustments are made:
1. Add --cull option to support the culling of blocks of information
with user-defined culling rules.
./page_owner_sort <input> <output> --cull=<rules>
./page_owner_sort <input> <output> --cull <rules>
<rules> is a single argument in the form of a comma-separated list to
specify individual culling rules, by the sequence of keys k1,k2, ....
Mixed use of abbreviated and complete-form of keys is allowed.
For reference, please see the document(Documentation/vm/page_owner.rst).
Now, assuming two blocks in the input file are as follows:
Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo)
PFN xxxx
prep_new_page+0xd0/0xf8
get_page_from_freelist+0x4a0/0x1290
__alloc_pages+0x168/0x340
alloc_pages+0xb0/0x158
Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo)
PFN xxxx
prep_new_page+0xd0/0xf8
get_page_from_freelist+0x4a0/0x1290
__alloc_pages+0x168/0x340
alloc_pages+0xb0/0x158
If we want to cull the blocks by stacktrace and task command name, we can
use this command:
./page_owner_sort <input> <output> --cull=stacktrace,name
The output would be like:
2 times, 2 pages, task_comm_name: task_name_demo
prep_new_page+0xd0/0xf8
get_page_from_freelist+0x4a0/0x1290
__alloc_pages+0x168/0x340
alloc_pages+0xb0/0x158
As we can see, these two blocks are culled successfully, for they share
the same pid and task command name.
However, if we want to cull the blocks by pid, stacktrace and task command
name, we can this command:
./page_owner_sort <input> <output> --cull=stacktrace,name,pid
The output would be like:
1 times, 1 pages, PID 1, task_comm_name: task_name_demo
prep_new_page+0xd0/0xf8
get_page_from_freelist+0x4a0/0x1290
__alloc_pages+0x168/0x340
alloc_pages+0xb0/0x158
1 times, 1 pages, PID 32, task_comm_name: task_name_demo
prep_new_page+0xd0/0xf8
get_page_from_freelist+0x4a0/0x1290
__alloc_pages+0x168/0x340
alloc_pages+0xb0/0x158
As we can see, these two blocks are failed to cull, for their PIDs are
different.
2. Add explanations of --cull options to the document.
This work is coauthored by
Yixuan Cao
Shenghong Han
Yinan Zhang
Chongxi Zhao
Yuhong Feng
Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn
Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
command name
When viewing page owner information, we may also need to select the blocks
by PID, TGID or task command name, which helps to get more accurate page
allocation information as needed.
Therefore, following adjustments are made:
1. Add three new options, including --pid, --tgid and --name, to support
the selection of information blocks by a specific pid, tgid and task
command name. In addtion, multiple options are allowed to be used at
the same time.
./page_owner_sort [input] [output] --pid <PID>
./page_owner_sort [input] [output] --tgid <TGID>
./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME>
Assuming a scenario when a multi-threaded program, ./demo (PID =
5280), is running, and ./demo creates a child process (PID = 5281).
$ps
PID TTY TIME CMD
5215 pts/0 00:00:00 bash
5280 pts/0 00:00:00 ./demo
5281 pts/0 00:00:00 ./demo
5282 pts/0 00:00:00 ps
It would be better to filter out the records with tgid=5280 and the
task name "demo" when debugging the parent process, and the specific
usage is
./page_owner_sort [input] [output] --tgid 5280 --name demo
2. Add explanations of three new options, including --pid, --tgid and
--name, to the document.
This work is coauthored by
Shenghong Han <hanshenghong2019@email.szu.edu.cn>,
Yixuan Cao <caoyixuan2019@email.szu.edu.cn>,
Yinan Zhang <zhangyinan2019@email.szu.edu.cn>,
Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>,
Yuhong Feng <yuhongf@szu.edu.cn>.
Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn
Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When viewing page owner information, we may also need to the block to be
sorted by task command name. Therefore, the following adjustments are
made:
1. Add a member variable to record task command name of block.
2. Add a new -n option to sort the information of blocks by task command
name.
3. Add -n option explanation in the document.
Link: https://lkml.kernel.org/r/20220306030640.43054-2-yejiajian2018@email.szu.edu.cn
Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: <zhaochongxi2019@email.szu.edu.cn>
Cc: <hanshenghong2019@email.szu.edu.cn>
Cc: <zhangyinan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The following adjustments are made:
1. Instead of using another array to cull the blocks after sorting,
reuse the old array. So there is no need to malloc a new array.
2. When enabling '-f' option to filter out the blocks which have been
released, only add those have not been released in the list, rather
than add all of blocks in the list and then do the filtering when
printing the result.
3. When enabling '-c' option to cull the blocks by comparing
stacktrace, print the stacetrace rather than the total block.
Link: https://lkml.kernel.org/r/20220306030640.43054-1-yejiajian2018@email.szu.edu.cn
Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: <hanshenghong2019@email.szu.edu.cn>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: <zhangyinan2019@email.szu.edu.cn>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When the "page owner" information is read, the information sorted
by TGID is expected.
As a result, the following adjustments have been made:
1. Add a new -P option to sort the information of blocks by TGID in
ascending order.
2. Adjust the order of member variables in block_list strust to avoid
one 4 byte hole.
3. Add -P option explanation in the document.
Link: https://lkml.kernel.org/r/20220301151438.166118-3-yejiajian2018@email.szu.edu.cn
Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a security check after using malloc() to allocate memory.
Link: https://lkml.kernel.org/r/20220301151438.166118-2-yejiajian2018@email.szu.edu.cn
Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I noticed a discrepancy between the usage method and the code logic.
If we enable the -f option, it should be "Filter out the information of
blocks whose memory has been released".
Link: https://lkml.kernel.org/r/20220219143106.2805-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I noticed that there is two invalid lines of duplicate code. It's better
to delete it.
Link: https://lkml.kernel.org/r/20211213095743.3630-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
1) There is an unused variable. It's better to delete it.
2) One case is missing in the usage().
Link: https://lkml.kernel.org/r/20211213164518.2461-1-hanshenghong2019@email.szu.edu.cn
Signed-off-by: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When viewing the page owner information, we expect that the information
can be sorted by PID, so that we can quickly combine PID with the program
to check the information together.
We also expect that the information can be sorted by time. Time sorting
helps to view the running status of the program according to the time
interval when the program hangs up.
Finally, we hope to pass the page_ owner_ Sort. C can reduce part of the
output and only output the plate information whose memory has not been
released, which can make us locate the problem of the program faster.
Therefore, the following adjustments have been made:
1. Add the static functions search_pattern and check_regcomp to
improve the cleanliness.
2. Add member attributes and their corresponding sorting methods. In
terms of comparison time, int will overflow because the data of ull is
too large, so the ternary operator is used
3. Add the -f parameter to filter out the information of blocks whose
memory has not been released
Link: https://lkml.kernel.org/r/20211206165653.5093-1-zhaochongxi2019@email.szu.edu.cn
Signed-off-by: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Culling by comparing stacktrace would casue loss of some information. For
example, if there exists 2 blocks which have the same stacktrace and the
different head info
Page allocated via order 0, mask 0x108c48(...), pid 73696,
ts 1578829190639010 ns, free_ts 1576583851324450 ns
prep_new_page+0x80/0xb8
get_page_from_freelist+0x924/0xee8
__alloc_pages+0x138/0xc18
alloc_pages+0x80/0xf0
__page_cache_alloc+0x90/0xc8
Page allocated via order 0, mask 0x108c48(...), pid 61806,
ts 1354113726046100 ns, free_ts 1354104926841400 ns
prep_new_page+0x80/0xb8
get_page_from_freelist+0x924/0xee8
__alloc_pages+0x138/0xc18
alloc_pages+0x80/0xf0
__page_cache_alloc+0x90/0xc8
After culling, it would be like this
2 times, 2 pages:
Page allocated via order 0, mask 0x108c48(...), pid 73696,
ts 1578829190639010 ns, free_ts 1576583851324450 ns
prep_new_page+0x80/0xb8
get_page_from_freelist+0x924/0xee8
__alloc_pages+0x138/0xc18
alloc_pages+0x80/0xf0
__page_cache_alloc+0x90/0xc8
The info of second block missed. So, add -c to turn on culling by
stacktrace. By default, it will cull by txt.
Link: https://lkml.kernel.org/r/20211129145658.2491-1-zhangyinan2019@email.szu.edu.cn
Signed-off-by: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Changhee Han <ch0.han@lge.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This adds the ability to sort by stacktraces. This is helpful when
comparing multiple dumps of page_owner taken at different times, since
blocks will not be reordered if they were allocated/free'd.
Link: https://lkml.kernel.org/r/20211124193709.1805776-2-seanga2@gmail.com
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Changhee Han <ch0.han@lge.com>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The contents of page_owner have changed to include more information than
the stack trace. On a modern kernel, the blocks look like
Page allocated via order 0, mask 0x0(), pid 1, ts 165564237 ns, free_ts 0 ns
register_early_stack+0x4b/0x90
init_page_owner+0x39/0x250
kernel_init_freeable+0x11e/0x242
kernel_init+0x16/0x130
Sorting by the contents of .txt will result in almost no repeated pages,
as the pid, ts, and free_ts will almost never be the same. Instead,
sort by the contents of the stack trace, which we assume to be whatever
is after the first line.
[seanga2@gmail.com: fix NULL-pointer dereference when comparing stack traces]
Link: https://lkml.kernel.org/r/20211125162653.1855958-1-seanga2@gmail.com
Link: https://lkml.kernel.org/r/20211124193709.1805776-1-seanga2@gmail.com
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Cc: Changhee Han <ch0.han@lge.com>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In page list mode (with -l and -L option), virtual address and physical
address are printed in hexadecimal, but file offset is not, which is
confusing, so let's align it.
Link: https://lkml.kernel.org/r/20211004061325.1525902-4-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Bin Wang <wangbin224@huawei.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Christian Hansen <chansen3@cisco.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently file info from show_file() is printed out within page list
like below, but this is inconvenient a little to utilize the page list
from other scripts (maybe needs additional filtering).
$ ./page-types -f page-types.c -l
foffset offset len flags
page-types.c Inode: 15108680 Size: 30953 (8 pages)
Modify: Sat Oct 2 23:11:20 2021 (2399 seconds ago)
Access: Sat Oct 2 23:11:28 2021 (2391 seconds ago)
0 d9f59e 1 ___U_lA____________________________________
1 1031eb5 1 __RU_l_____________________________________
2 13bf717 1 __RU_l_____________________________________
3 13ac333 1 ___U_lA____________________________________
4 d9f59f 1 __RU_l_____________________________________
5 183fd49 1 ___U_lA____________________________________
6 13cbf69 1 ___U_lA____________________________________
7 d9ef05 1 ___U_lA____________________________________
flags page-count MB symbolic-flags long-symbolic-flags
0x000000000000002c 3 0 __RU_l_____________________________________ referenced,uptodate,lru
0x0000000000000068 5 0 ___U_lA____________________________________ uptodate,lru,active
total 8 0
With this patch file info is printed out in summary part like below:
$ ./page-types -f page-types.c -l
foffset offset len flags
0 d9f59e 1 ___U_lA_____________________________________
1 1031eb5 1 __RU_l______________________________________
2 13bf717 1 __RU_l______________________________________
3 13ac333 1 ___U_lA_____________________________________
4 d9f59f 1 __RU_l______________________________________
5 183fd49 1 ___U_lA_____________________________________
6 13cbf69 1 ___U_lA_____________________________________
page-types.c Inode: 15108680 Size: 30953 (8 pages)
Modify: Sat Oct 2 23:11:20 2021 (2435 seconds ago)
Access: Sat Oct 2 23:11:28 2021 (2427 seconds ago)
flags page-count MB symbolic-flags long-symbolic-flags
0x000000000000002c 3 0 __RU_l______________________________________ referenced,uptodate,lru
0x0000000000000068 4 0 ___U_lA_____________________________________ uptodate,lru,active
total 7 0
Link: https://lkml.kernel.org/r/20211004061325.1525902-3-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Bin Wang <wangbin224@huawei.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Christian Hansen <chansen3@cisco.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "tools/vm/page-types.c: a few improvements".
This patchset adds some improvements on tools/vm/page-types.c. Patch
1/3 makes -a option (specify address range) work with -f (file cache
mode). Patch 2/3 and 3/3 are to fix minor formatting issues of this
tool. These would make life a little easier for the users of this tool.
Please see individual patches for more details about specific issues.
This patch (of 3):
-a|--addr option is used to limit the range of address to be scanned for
page status. It works now for physical address space (dafult mode) or for
virtual address space (with -p option), but not for file address space
(with -f option). So make walk_file() aware of -a option.
Link: https://lkml.kernel.org/r/20211004061325.1525902-1-naoya.horiguchi@linux.dev
Link: https://lkml.kernel.org/r/20211004061325.1525902-2-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Christian Hansen <chansen3@cisco.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Bin Wang <wangbin224@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When viewing page owner information, we may be more concerned about the
total memory rather than the times of stack appears. Therefore, the
following adjustments are made:
1. Added the statistics on the total number of pages.
2. Added the optional parameter "-m" to configure the program to sort by
memory (total pages).
The general output of page_owner is as follows:
Page allocated via order XXX, ...
PFN XXX ...
// Detailed stack
Page allocated via order XXX, ...
PFN XXX ...
// Detailed stack
The original page_owner_sort ignores PFN rows, puts the remaining rows
in buf, counts the times of buf, and finally sorts them according to the
times. General output:
XXX times:
Page allocated via order XXX, ...
// Detailed stack
Now, we use regexp to extract the page order value from the buf, and
count the total pages for the buf. General output:
XXX times, XXX pages:
Page allocated via order XXX, ...
// Detailed stack
By default, it is still sorted by the times of buf; If you want to sort
by the pages nums of buf, use the new -m parameter.
Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com
Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Idle page tracking can also be used for process address space, not only
file mappings.
Without this change, using with '-i' option for process address space
encounters below errors reported.
$ sudo ./page-types -p $(pidof bash) -i
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
...
Link: https://lkml.kernel.org/r/20210917032826.10669-1-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Link: https://lkml.kernel.org/r/20210506131402.10416-1-tangbin@cmss.chinamobile.com
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For arm64 MTE support it is necessary to be able to mark pages that
contain user space visible tags that will need to be saved/restored e.g.
when swapped out.
To support this add a new arch specific flag (PG_arch_2). This flag is
only available on 64-bit architectures due to the limited number of
spare page flags on the 32-bit ones.
Signed-off-by: Steven Price <steven.price@arm.com>
[catalin.marinas@arm.com: use CONFIG_64BIT for guarding this new flag]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
|
|
To see a sorted result from page_owner, there must be a tiresome
preprocessing step before running page_owner_sort. This patch simply
filters out lines which start with "PFN" while reading the page owner
report.
Signed-off-by: Changhee Han <ch0.han@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: http://lkml.kernel.org/r/20200429052940.16968-1-ch0.han@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 7ed1c1901fe5 ("tools: fix cross-compile var clobbering") moved
the setup of the CC variable to tools/scripts/Makefile.include to make
the behavior consistent across all the tools Makefiles.
As the vm tools missed the include we end up with the wrong CC in a
cross-compiling evironment.
Fixes: 7ed1c1901fe5 (tools: fix cross-compile var clobbering)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Martin Kelly <martin@martingkelly.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200416104748.25243-1-l.stach@pengutronix.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add SPDX License Identifier to all .gitignore files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The sysfs file name for enabling sanity checking is called
'sanity_checks' and not 'sanity'.
The name of the file has never changed since the introduction of the
slub allocator. Obviously, most people turn the checks on via the
command line option and not during runtime using slabinfo.
Link: http://lkml.kernel.org/r/20200116131642.642-1-dwagner@suse.de
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Tobin C. Harding" <tobin@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Passing more than one sorting option has undefined behaviour.
Add an explicit statement as such to the help menu, this also has the
advantage of highlighting all the sorting options.
Link: http://lkml.kernel.org/r/20190426022622.4089-5-tobin@kernel.org
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>,
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@iki.fi>
Cc: Qian Cai <cai@lca.pw>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We would like to get a better view of the level of fragmentation within
the SLUB allocator. Total number of partial slabs is an indicator of
fragmentation.
Add a command line option (-P | --partial) to sort the slab list by total
number of partial slabs.
Link: http://lkml.kernel.org/r/20190426022622.4089-4-tobin@kernel.org
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>,
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@iki.fi>
Cc: Qian Cai <cai@lca.pw>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We would like to see how fragmented the SLUB allocator is, one window into
fragmentation is the total number of partial slabs.
Currently `slabinfo -X` shows slabs sorted by loss and by size. We can
use this option to also show slabs sorted by number of partial slabs.
Option '-X' can be used in conjunction with '-N' to control the number of
slabs shown e.g. list of top 5 slabs:
slabinfo -X -N5
Add list of slabs ordered by number of partial slabs to output of
`slabinfo -X`.
Link: http://lkml.kernel.org/r/20190426022622.4089-3-tobin@kernel.org
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>,
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@iki.fi>
Cc: Qian Cai <cai@lca.pw>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
During recent discussion on LKML over SLAB vs SLUB it was suggested by
Jesper that it would be nice to have a tool to view the current
fragmentation of the slab allocators. CC list for this set is taken
from that thread.
For SLUB we have all the information for this already exposed by the
kernel and also we have a userspace tool for displaying this info:
tools/vm/slabinfo.c
Extend slabinfo to improve the fragmentation information by enabling
sorting of caches by number of partial slabs.
Also add cache list sorted in this manner to the output of `slabinfo -X`.
This patch (of 4):
get_opt() has a spurious character within the option string. Remove it
and reorder the options in alphabetic order so that it is easier to keep
the options correct. Use the same ordering for command help output and
long option handling code.
Link: http://lkml.kernel.org/r/20190426022622.4089-2-tobin@kernel.org
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Pekka Enberg <penberg@iki.fi>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>,
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Based on 1 normalized pattern(s):
this software is licensed under the terms of the gnu general public
license version 2 as published by the free software foundation and
may be copied distributed and modified under those terms this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 285 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 this program is distributed
in the hope that it will be useful but without any warranty without
even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more
details you should find a copy of v2 of the gnu general public
license somewhere on your linux system if not write to the free
software foundation inc 59 temple place suite 330 boston ma 02111
1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.073926682@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Attempt to make the usage comment for debug options a little cleaner.
Link: http://lkml.kernel.org/r/20190212001219.27769-5-tobin@kernel.org
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Usage message uses spaces not tabspaces, a few tabspaces have snuck in
making the columns not align correctly when output.
Align usage output columns using spaces instead of tabspaces.
Link: http://lkml.kernel.org/r/20190212001219.27769-4-tobin@kernel.org
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Primarily the usage message lists options in alphabetic order however
there are a bunch of the options that are not in alphabetic order.
Put options in alphabetic order.
Link: http://lkml.kernel.org/r/20190212001219.27769-3-tobin@kernel.org
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently usage message list only a subset of the available options.
should list them all.
Update options in usage massage to include all available options.
Link: http://lkml.kernel.org/r/20190212001219.27769-2-tobin@kernel.org
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
PG_balloon was introduced to implement page migration/compaction for
pages inflated in virtio-balloon. Nowadays, it is only a marker that a
page is part of virtio-balloon and therefore logically offline.
We also want to make use of this flag in other balloon drivers - for
inflated pages or when onlining a section but keeping some pages offline
(e.g. used right now by XEN and Hyper-V via set_online_page_callback()).
We are going to expose this flag to dump tools like makedumpfile. But
instead of exposing PG_balloon, let's generalize the concept of marking
pages as logically offline, so it can be reused for other purposes later
on.
Rename PG_balloon to PG_offline. This is an indicator that the page is
logically offline, the content stale and that it should not be touched
(e.g. a hypervisor would have to allocate backing storage in order for
the guest to dump an unused page). We can then e.g. exclude such pages
from dumps.
We replace and reuse KPF_BALLOON (23), as this shouldn't really harm
(and for now the semantics stay the same). In following patches, we
will make use of this bit also in other balloon drivers. While at it,
document PGTABLE.
[akpm@linux-foundation.org: fix comment text, per David]
Link: http://lkml.kernel.org/r/20181119101616.8901-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Pankaj gupta <pagupta@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Christian Hansen <chansen3@cisco.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Miles Chen <miles.chen@mediatek.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Julien Freche <jfreche@vmware.com>
Cc: Kairui Song <kasong@redhat.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Lianbo Jiang <lijiang@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The example in comment does not useable because the output binary is
named "page_owner_sort", not "sort".
Also add a reference to Documentation/vm/page_owner.rst
Link: http://lkml.kernel.org/r/1546515361-8317-1-git-send-email-miles.chen@mediatek.com
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|