| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
introduce vhost_net_test for both vhost_net tx and rx basing
on virtio_test to test vhost_net changing in the kernel.
Steps for vhost_net tx testing:
1. Prepare a out buf.
2. Kick the vhost_net to do tx processing.
3. Do the receiving in the tun side.
4. verify the data received by tun is correct.
Steps for vhost_net rx testing:
1. Prepare a in buf.
2. Do the sending in the tun side.
3. Kick the vhost_net to do rx processing.
4. verify the data received by vhost_net is correct.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fixes: 8bd2f71054bd ("virtio_ring: introduce dma sync api for virtqueue")
also add dma sync api for virtio test.
Signed-off-by: Liming Wu <liming.wu@jaguarmicro.com>
Message-Id: <20231008031734.1095-1-liming.wu@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fix the build dependency for virtio_test. The virtio_ring that is used from
the test requires container_of_const(). Change to use container_of.h kernel
header directly and adapt related codes.
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Message-Id: <20230417022037.917668-2-mie@igel.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fix the build caused by missing kmsan_handle_dma() and is_power_of_2() that
are used in drivers/virtio/virtio_ring.c.
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Message-Id: <20230110034310.779744-1-mie@igel.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fix virtio test compilation failure caused by vq reset.
../../drivers/virtio/virtio_ring.c: In function ‘vring_create_virtqueue_packed’:
../../drivers/virtio/virtio_ring.c:1999:8: error: ‘struct virtqueue’ has no member named ‘reset’
1999 | vq->vq.reset = false;
| ^
../../drivers/virtio/virtio_ring.c: In function ‘__vring_new_virtqueue’:
../../drivers/virtio/virtio_ring.c:2493:8: error: ‘struct virtqueue’ has no member named ‘reset’
2493 | vq->vq.reset = false;
| ^
../../drivers/virtio/virtio_ring.c: In function ‘virtqueue_resize’:
../../drivers/virtio/virtio_ring.c:2587:18: error: ‘struct virtqueue’ has no member named ‘num_max’
2587 | if (num > vq->vq.num_max)
| ^
../../drivers/virtio/virtio_ring.c:2596:11: error: ‘struct virtio_device’ has no member named ‘config’
2596 | if (!vdev->config->disable_vq_and_reset)
| ^~
../../drivers/virtio/virtio_ring.c:2599:11: error: ‘struct virtio_device’ has no member named ‘config’
2599 | if (!vdev->config->enable_vq_after_reset)
| ^~
../../drivers/virtio/virtio_ring.c:2602:12: error: ‘struct virtio_device’ has no member named ‘config’
2602 | err = vdev->config->disable_vq_and_reset(_vq);
| ^~
../../drivers/virtio/virtio_ring.c:2614:10: error: ‘struct virtio_device’ has no member named ‘config’
2614 | if (vdev->config->enable_vq_after_reset(_vq))
| ^~
make: *** [<builtin>: virtio_ring.o] Error 1
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20220830110549.103168-1-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fix the build caused by the following changes:
- phys_addr_t is now defined in tools/include/linux/types.h
- dev_warn_once() is used in drivers/virtio/virtio_ring.c
- linux/uio.h included by vringh.h use INT_MAX defined in limits.h
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220705072249.7867-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
just add a stub
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We use a spinlock now so add a stub.
Ignore bogus uninitialized variable warnings.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
krealloc_array is used in drivers/vhost/vringh.c, add it to avoid build
failure.
Drop WARN_ON_ONCE, because duplicated with the one in bug.h
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20201209084205.24062-3-peng.fan@oss.nxp.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
WARN_ON is used in drivers/vhost/vringh.c, to avoid build failure,
need include asm/bug.h
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20201209084205.24062-2-peng.fan@oss.nxp.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Pull virtio updates from Michael Tsirkin:
- IRQ bypass support for vdpa and IFC
- MLX5 vdpa driver
- Endianness fixes for virtio drivers
- Misc other fixes
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (71 commits)
vdpa/mlx5: fix up endian-ness for mtu
vdpa: Fix pointer math bug in vdpasim_get_config()
vdpa/mlx5: Fix pointer math in mlx5_vdpa_get_config()
vdpa/mlx5: fix memory allocation failure checks
vdpa/mlx5: Fix uninitialised variable in core/mr.c
vdpa_sim: init iommu lock
virtio_config: fix up warnings on parisc
vdpa/mlx5: Add VDPA driver for supported mlx5 devices
vdpa/mlx5: Add shared memory registration code
vdpa/mlx5: Add support library for mlx5 VDPA implementation
vdpa/mlx5: Add hardware descriptive header file
vdpa: Modify get_vq_state() to return error code
net/vdpa: Use struct for set/get vq state
vdpa: remove hard coded virtq num
vdpasim: support batch updating
vhost-vdpa: support IOTLB batching hints
vhost-vdpa: support get/set backend features
vhost: generialize backend features setting/getting
vhost-vdpa: refine ioctl pre-processing
vDPA: dont change vq irq after DRIVER_OK
...
|
|
Now that the corresponding feature bit has been renamed,
rename the quirk too - it's about special ways to
do DMA, not necessarily about the IOMMU.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Rename the bit to match latest virtio spec.
Add a compat macro to avoid breaking existing userspace.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
|
|
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
As recommended[2] by[3] Linus[4], remove the macro. With the recent
change to disable -Wmaybe-uninitialized in v5.7 in commit 78a5255ffb6a
("Stop the ad-hoc games with -Wno-maybe-initialized"), this is likely
the best time to make this treewide change.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Reviewed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
It should not make any significant difference but reduce stub code.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20200418102217.32327-9-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
fix test module build.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The condition to test is unlikely() to be true. Add the hint.
Signed-off-by: Igor Stoppa <igor.stoppa@huawei.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fixes: d38499530e5 ("fs: decouple READ and WRITE from the block layer ops")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fixes: 6da2ec56059 ("treewide: kmalloc() -> kmalloc_array()")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This was introduced more than a decade ago when sg chaining was
added, but we never really caught anything with it. The scatterlist
entry size can be critical, since drivers allocate it, so remove
the magic member. Recently it's been triggering allocation stalls
and failures in NVMe.
Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This was used by the ide, scsi and networking code in the past to
determine if they should bounce payloads. Now that the dma mapping
always have to support dma to all physical memory (thanks to swiotlb
for non-iommu systems) there is no need to this crude hack any more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Palmer Dabbelt <palmer@sifive.com> (for riscv)
Reviewed-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Previous commit ("virtio: add context flag to find vqs")
added a new 'context' flag to vring_new_virtqueue(), but the
corresponding API in tools/virtio/ is not updated causing
build errors due to conflicting declarations.
Bring code in tools/virtio in sync with that in kernel.
I have used 'false' for the value of the new boolean 'context'
flag as that seems to be the best way to preserve existing
behavior.
Tested with:
$ make -C tools/virtio clean all ARCH=x86
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
As a step towards killing off ACCESS_ONCE, use {READ,WRITE}_ONCE() for the
virtio tools uaccess primitives, pulling these in from <linux/compiler.h>.
With this done, we can kill off the now-unused ACCESS_ONCE() definition.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
|
|
The virtio tools implementation of READ_ONCE() has a single parameter called
'var', but erroneously refers to 'val' for its cast, and thus won't work unless
there's a variable of the correct type that happens to be called 'var'.
Fix this with s/var/val/, making READ_ONCE() work as expected regardless.
Fixes: a7c490333df3cff5 ("tools/virtio: use virt_xxx barriers")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
|
|
Fixes build after recent IOMMU-related changes,
mustly by adding more stubs.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtio_ring currently sends the device (usually a hypervisor)
physical addresses of its I/O buffers. This is okay when DMA
addresses and physical addresses are the same thing, but this isn't
always the case. For example, this never works on Xen guests, and
it is likely to fail if a physical "virtio" device ever ends up
behind an IOMMU or swiotlb.
The immediate use case for me is to enable virtio on Xen guests.
For that to work, we need vring to support DMA address translation
as well as a corresponding change to virtio_pci or to another
driver.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fix build after API changes.
Reported-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
commit cf561f0d2eb74574ad9985a2feab134267a9d298 ("virtio: introduce
virtio_is_little_endian() helper") changed byteswap logic to
skip feature bit checks for LE platforms, but didn't
update tools/virtio, so vring_bench started failing.
Update the copy under tools/virtio/ (TODO: find a way to avoid this code
duplication).
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Makes them more generally available.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
more stubs, mostly
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
As usual, add more stubs to fix test build after main
codebase changes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Change u32 to u64, and use BIT_ULL and 1ULL everywhere.
Note: transports are unchanged, and only set low 32 bit.
This guarantees that no transport sets e.g. VERSION_1
by mistake without proper support.
Based on patch by Rusty.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
It seemed like a good idea to use bitmap for features
in struct virtio_device, but it's actually a pain,
and seems to become even more painful when we get more
than 32 feature bits. Just change it to a u32 for now.
Based on patch by Rusty.
Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
Combine all definitions into a common tools/include/linux/types.h and
kill the wild growth elsewhere. Move DECLARE_BITMAP to its proper
bitmap.h header.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Link: http://lkml.kernel.org/n/tip-azczs7qcv6h9xek9od10hiv2@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
|
|
So tools/ has been growing three, at a different stage of their
development export.h headers and so we should unite into one. Add
tools/include/ to the include path of virtio and liblockdep to pick the
shared header now.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: virtio-dev@lists.oasis-open.org
Cc: virtualization@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1397493185-19521-2-git-send-email-bp@alien8.de
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
|
|
In commit bb478d8b167 virtio_ring: plug kmemleak false positive,
kmemleak_ignore was introduced. This broke compilation of virtio_test:
cc -g -O2 -Wall -I. -I ../../usr/include/ -Wno-pointer-sign
-fno-strict-overflow -fno-strict-aliasing -fno-common -MMD
-U_FORTIFY_SOURCE -c -o virtio_ring.o ../../drivers/virtio/virtio_ring.c
../../drivers/virtio/virtio_ring.c: In function ‘vring_add_indirect’:
../../drivers/virtio/virtio_ring.c:177:2: warning: implicit declaration
of function ‘kmemleak_ignore’ [-Wimplicit-function-declaration]
kmemleak_ignore(desc);
^
cc virtio_test.o virtio_ring.o -o virtio_test
virtio_ring.o: In function `vring_add_indirect':
tools/virtio/../../drivers/virtio/virtio_ring.c:177:
undefined reference to `kmemleak_ignore'
Add a dummy header for tools/virtio, and add #incldue <linux/kmemleak.h>
to drivers/virtio/virtio_ring.c so it is picked up by the userspace
tools.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
The virtio headers have changed recently:
5b1bf7cb673 virtio_ring: let virtqueue_{kick()/notify()} return a bool
46f9c2b925a virtio_ring: change host notification API
Update the internal copies to fix the build of virtio_test:
cc -g -O2 -Wall -I. -I ../../usr/include/ -Wno-pointer-sign
-fno-strict-overflow -fno-strict-aliasing -fno-common -MMD -U_FORTIFY_SOURCE
-c -o virtio_test.o virtio_test.c
In file included from virtio_test.c:15:0:
./linux/virtio.h:76:19: error: conflicting types for ‘vring_new_virtqueue’
struct virtqueue *vring_new_virtqueue(unsigned int index,
^
In file included from ./linux/virtio_ring.h:1:0,
from ../../usr/include/linux/vhost.h:17,
from virtio_test.c:14:
./linux/../../../include/linux/virtio_ring.h:68:19: note: previous
declaration of ‘vring_new_virtqueue’ was here
struct virtqueue *vring_new_virtqueue(unsigned int index,
virtio_test.c: In function ‘vq_info_add’:
virtio_test.c:103:12: warning: passing argument 7 of ‘vring_new_virtqueue’
from incompatible pointer type [enabled by default]
vq_notify, vq_callback, "test");
^
In file included from virtio_test.c:15:0:
./linux/virtio.h:76:19: note: expected ‘void (*)(struct virtqueue *)’ but
argument is of type ‘_Bool (*)(struct virtqueue *)’
struct virtqueue *vring_new_virtqueue(unsigned int index,
^
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
This fixes build for the vringh test:
[linux]$ make -C tools/virtio/
make: Entering directory `/home/mst/scm/linux/tools/virtio'
cc -g -O2 -Wall -I. -I ../../usr/include/ -Wno-pointer-sign
-fno-strict-overflow -fno-strict-aliasing -fno-common -MMD
-U_FORTIFY_SOURCE -c -o vringh.o ../../drivers/vhost/vringh.c
../../drivers/vhost/vringh.c:1010:16: error: expected declaration
specifiers or ‘...’ before string constant
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Make the rest of the paths use virtqueue_add_sgs or add_outbuf.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
As expected, the simplified accessors are faster.
for i in `seq 50`; do /usr/bin/time -f 'Wall time:%e' ./vringh_test --indirect --eventidx --parallel --fast-vringh; done 2>&1 | stats --trim-outliers:
Before:
Using CPUS 0 and 3
Guest: notified 0, pinged 39062-39063(39063)
Host: notified 39062-39063(39063), pinged 0
Wall time:1.760000-2.220000(1.789167)
After:
Using CPUS 0 and 3
Guest: notified 0, pinged 39037-39063(39062)
Host: notified 39037-39063(39062), pinged 0
Wall time:1.640000-1.810000(1.676875)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
virtio_scsi can really use this, to avoid the current hack of copying
the whole sg array. Some other things get slightly neater, too.
This causes a slowdown in virtqueue_add_buf(), which is implemented as
a wrapper. This is addressed in the next patches.
for i in `seq 50`; do /usr/bin/time -f 'Wall time:%e' ./vringh_test --indirect --eventidx --parallel --fast-vringh; done 2>&1 | stats --trim-outliers:
Before:
Using CPUS 0 and 3
Guest: notified 0, pinged 39009-39063(39062)
Host: notified 39009-39063(39062), pinged 0
Wall time:1.700000-1.950000(1.723542)
After:
Using CPUS 0 and 3
Guest: notified 0, pinged 39062-39063(39063)
Host: notified 39062-39063(39063), pinged 0
Wall time:1.760000-2.220000(1.789167)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Asias He <asias@redhat.com>
|
|
This is mainly to test the drivers/vhost/vringh.c code, but it also
uses the drivers/virtio/virtio_ring.c code for the guest side.
Usage for testing the basic implementation:
./vringh_test
# Test with indirect descriptors
./vringh_test --indirect
# Test with indirect descriptors and event indexex
./vringh_test --indirect --eventidx
You can run a parallel stress test by adding --parallel to any of the
above options.
eg ./vringh_test --parallel:
Using CPUS 0 and 3
Guest: notified 10107974, pinged 107970
Host: notified 108158, pinged 3172148
./vringh_test --indirect --eventidx --parallel:
Using CPUS 0 and 3
Guest: notified 156357, pinged 156251
Host: notified 156251, pinged 78179
Average of 50 times doing ./vringh_test --indirect --eventidx --parallel:
2.840000-3.040000(2.927292)user
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
This makes them a bit more like the kernel headers, so we can include more
real kernel headers in our tests.
In addition this means that we don't break tools/virtio with the next
patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The tool should never use them, abort if it does.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
