summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)AuthorFilesLines
2024-03-01selftests: mptcp: add mptcp_lib_get_counterGeliang Tang4-86/+73
commit 61c131f5d4d2b79904af2fdcb2839a9db8e7c55c upstream. To avoid duplicated code in different MPTCP selftests, we can add and use helpers defined in mptcp_lib.sh. The helper get_counter() in mptcp_join.sh and get_mib_counter() in mptcp_connect.sh have the same functionality, export get_counter() into mptcp_lib.sh and rename it as mptcp_lib_get_counter(). Use this new helper instead of get_counter() and get_mib_counter(). Use this helper in test_prio() in userspace_pm.sh too instead of open-coding. Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-11-8d6b94150f6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01selftests: mptcp: join: stop transfer when check is done (part 2)Matthieu Baerts (NGI0)1-11/+6
commit 04b57c9e096a9479fe0ad31e3956e336fa589cb2 upstream. Since the "Fixes" commits mentioned below, the newly added "userspace pm" subtests of mptcp_join selftests are launching the whole transfer in the background, do the required checks, then wait for the end of transfer. There is no need to wait longer, especially because the checks at the end of the transfer are ignored (which is fine). This saves quite a few seconds on slow environments. While at it, use 'mptcp_lib_kill_wait()' helper everywhere, instead of on a specific one with 'kill_tests_wait()'. Fixes: b2e2248f365a ("selftests: mptcp: userspace pm create id 0 subflow") Fixes: e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow") Fixes: b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0") Cc: stable@vger.kernel.org Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-9-4c1c11e571ff@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01selftests: mptcp: join: stop transfer when check is done (part 1)Matthieu Baerts (NGI0)1-2/+2
commit 31ee4ad86afd6ed6f4bb1b38c43011216080c42a upstream. Since the "Fixes" commit mentioned below, "userspace pm" subtests of mptcp_join selftests introduced in v6.5 are launching the whole transfer in the background, do the required checks, then wait for the end of transfer. There is no need to wait longer, especially because the checks at the end of the transfer are ignored (which is fine). This saves quite a few seconds in slow environments. Note that old versions will need commit bdbef0a6ff10 ("selftests: mptcp: add mptcp_lib_kill_wait") as well to get 'mptcp_lib_kill_wait()' helper. Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer") Cc: stable@vger.kernel.org # 6.5.x: bdbef0a6ff10: selftests: mptcp: add mptcp_lib_kill_wait Cc: stable@vger.kernel.org # 6.5.x Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-8-4c1c11e571ff@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01selftests/iommu: fix the config fragmentMuhammad Usama Anjum1-2/+3
[ Upstream commit 510325e5ac5f45c1180189d3bfc108c54bf64544 ] The config fragment doesn't follow the correct format to enable those config options which make the config options getting missed while merging with other configs. ➜ merge_config.sh -m .config tools/testing/selftests/iommu/config Using .config as base Merging tools/testing/selftests/iommu/config ➜ make olddefconfig .config:5295:warning: unexpected data: CONFIG_IOMMUFD .config:5296:warning: unexpected data: CONFIG_IOMMUFD_TEST While at it, add CONFIG_FAULT_INJECTION as well which is needed for CONFIG_IOMMUFD_TEST. If CONFIG_FAULT_INJECTION isn't present in base config (such as x86 defconfig), CONFIG_IOMMUFD_TEST doesn't get enabled. Fixes: 57f0988706fe ("iommufd: Add a selftest") Link: https://lore.kernel.org/r/20240222074934.71380-1-usama.anjum@collabora.com Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01selftests: bonding: set active slave to primary eth1 specificallyHangbin Liu1-0/+2
[ Upstream commit cd65c48d66920457129584553f217005d09b1edb ] In bond priority testing, we set the primary interface to eth1 and add eth0,1,2 to bond in serial. This is OK in normal times. But when in debug kernel, the bridge port that eth0,1,2 connected would start slowly (enter blocking, forwarding state), which caused the primary interface down for a while after enslaving and active slave changed. Here is a test log from Jakub's debug test[1]. [ 400.399070][ T50] br0: port 1(s0) entered disabled state [ 400.400168][ T50] br0: port 4(s2) entered disabled state [ 400.941504][ T2791] bond0: (slave eth0): making interface the new active one [ 400.942603][ T2791] bond0: (slave eth0): Enslaving as an active interface with an up link [ 400.943633][ T2766] br0: port 1(s0) entered blocking state [ 400.944119][ T2766] br0: port 1(s0) entered forwarding state [ 401.128792][ T2792] bond0: (slave eth1): making interface the new active one [ 401.130771][ T2792] bond0: (slave eth1): Enslaving as an active interface with an up link [ 401.131643][ T69] br0: port 2(s1) entered blocking state [ 401.132067][ T69] br0: port 2(s1) entered forwarding state [ 401.346201][ T2793] bond0: (slave eth2): Enslaving as a backup interface with an up link [ 401.348414][ T50] br0: port 4(s2) entered blocking state [ 401.348857][ T50] br0: port 4(s2) entered forwarding state [ 401.519669][ T250] bond0: (slave eth0): link status definitely down, disabling slave [ 401.526522][ T250] bond0: (slave eth1): link status definitely down, disabling slave [ 401.526986][ T250] bond0: (slave eth2): making interface the new active one [ 401.629470][ T250] bond0: (slave eth0): link status definitely up [ 401.630089][ T250] bond0: (slave eth1): link status definitely up [...] # TEST: prio (active-backup ns_ip6_target primary_reselect 1) [FAIL] # Current active slave is eth2 but not eth1 Fix it by setting active slave to primary slave specifically before testing. [1] https://netdev-3.bots.linux.dev/vmksft-bonding-dbg/results/464301/1-bond-options-sh/stdout Fixes: 481b56e0391e ("selftests: bonding: re-format bond option tests") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01net/sched: act_mirred: use the backlog for mirred ingressJakub Kicinski1-3/+0
[ Upstream commit 52f671db18823089a02f07efc04efdb2272ddc17 ] The test Davide added in commit ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress") hangs our testing VMs every 10 or so runs, with the familiar tcp_v4_rcv -> tcp_v4_rcv deadlock reported by lockdep. The problem as previously described by Davide (see Link) is that if we reverse flow of traffic with the redirect (egress -> ingress) we may reach the same socket which generated the packet. And we may still be holding its socket lock. The common solution to such deadlocks is to put the packet in the Rx backlog, rather than run the Rx path inline. Do that for all egress -> ingress reversals, not just once we started to nest mirred calls. In the past there was a concern that the backlog indirection will lead to loss of error reporting / less accurate stats. But the current workaround does not seem to address the issue. Fixes: 53592b364001 ("net/sched: act_mirred: Implement ingress actions") Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Suggested-by: Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.1663945716.git.dcaratti@redhat.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01selftests: mptcp: diag: unique 'cestab' subtest namesMatthieu Baerts (NGI0)1-6/+11
commit 4103d8480866fe5abb71ef0ed8af3a3b7b9625bf upstream. It is important to have a unique (sub)test name in TAP, because some CI environments drop tests with duplicated name. Some 'cestab' subtests from the diag selftest had the same names, e.g.: ....chk 0 cestab Now the previous value is taken, to have different names, e.g.: ....chk 2->0 cestab after flush While at it, the 'after flush' info is added, similar to what is done with the 'in use' subtests. Also inspired by these 'in use' subtests, 'many' is displayed instead of a large number: many msk socket present [ ok ] ....chk many msk in use [ ok ] ....chk many cestab [ ok ] ....chk many->0 msk in use after flush [ ok ] ....chk many->0 cestab after flush [ ok ] Fixes: 81ab772819da ("selftests: mptcp: diag: check CURRESTAB counters") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01selftests: mptcp: diag: unique 'in use' subtest namesMatthieu Baerts (NGI0)1-8/+12
commit 645c1dc965ef6b5554e5e69737bb179c7a0f872f upstream. It is important to have a unique (sub)test name in TAP, because some CI environments drop tests with duplicated name. Some 'in use' subtests from the diag selftest had the same names, e.g.: chk 0 msk in use after flush Now the previous value is taken, to have different names, e.g.: chk 2->0 msk in use after flush While at it, avoid repeating the full message, declare it once in the helper. Fixes: ce9902573652 ("selftests: mptcp: diag: format subtests results in TAP") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01selftests: mptcp: diag: fix bash warnings on older kernelsMatthieu Baerts (NGI0)1-2/+2
commit 694bd45980a61045eb5ec07799e3b94c76db830e upstream. Since the 'Fixes' commit mentioned below, the command that is executed in __chk_nr() helper can return nothing if the feature is not supported. This is the case when the MPTCP CURRESTAB counter is not supported. To avoid this warning ... ./diag.sh: line 65: [: !=: unary operator expected ... we just need to surround '$nr' with double quotes, to support an empty string when the feature is not supported. Fixes: 81ab772819da ("selftests: mptcp: diag: check CURRESTAB counters") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01selftests: mptcp: diag: check CURRESTAB countersGeliang Tang1-1/+16
commit 81ab772819da408977ac79c0a17d8be57283379f upstream. This patch adds a new helper chk_msk_cestab() to check the current established connections counter MIB_CURRESTAB in diag.sh. Invoke it to check the counter during the connection after every chk_msk_inuse(). Signed-off-by: Geliang Tang <geliang.tang@linux.dev> Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01selftests: mptcp: pm nl: avoid error msg on older kernelsMatthieu Baerts (NGI0)1-1/+1
commit 662f084f3396d8a804d56cb53ac05c9e39902a7b upstream. Since the 'Fixes' commit mentioned below, and if the kernel being tested doesn't support the 'fullmesh' flag, this error will be printed: netlink error -22 (Invalid argument) ./pm_nl_ctl: bailing out due to netlink error[s] But that can be normal if the kernel doesn't support the feature, no need to print this worrying error message while everything else looks OK. So we can mute stderr. Failures will still be detected if any. Fixes: 1dc88d241f92 ("selftests: mptcp: pm_nl_ctl: always look for errors") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01selftests: mptcp: pm nl: also list skipped testsMatthieu Baerts (NGI0)1-0/+6
commit d2a2547565a9f1ad7989f7e21f97cbf065a9390d upstream. If the feature is not supported by older kernels, and instead of just ignoring some tests, we should mark them as skipped, so we can still track them. Fixes: d85555ac11f9 ("selftests: mptcp: pm_netlink: format subtests results in TAP") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01selftests: mptcp: simult flows: fix some subtest namesMatthieu Baerts (NGI0)1-1/+2
commit 4d8e0dde0403b5a86aa83e243f020711a9c3e31f upstream. The selftest was correctly recording all the results, but the 'reverse direction' part was missing in the name when needed. It is important to have a unique (sub)test name in TAP, because some CI environments drop tests with duplicated name. Fixes: 675d99338e7a ("selftests: mptcp: simult flows: format subtests results in TAP") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01selftests: mptcp: userspace_pm: unique subtest namesMatthieu Baerts (NGI0)1-2/+2
commit 2ef0d804c090658960c008446523863fd7e3541e upstream. It is important to have a unique (sub)test name in TAP, because some CI environments drop tests with duplicated names. Some subtests from the userspace_pm selftest had the same names. That's because different subflows are created (and deleted) between the same pair of IP addresses. Simply adding the destination port in the name is then enough to have different names, because the destination port is always different. Note that adding such info takes a bit more space, so we need to increase a bit the width to print the name, simply to keep all the '[ OK ]' aligned as before. Fixes: f589234e1af0 ("selftests: mptcp: userspace_pm: format subtests results in TAP") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01selftests/mm: uffd-unit-test check if huge page size is 0Terry Tritton1-0/+6
commit 7efa6f2c803366f84c3c362f01e822490669d72b upstream. If HUGETLBFS is not enabled then the default_huge_page_size function will return 0 and cause a divide by 0 error. Add a check to see if the huge page size is 0 and skip the hugetlb tests if it is. Link: https://lkml.kernel.org/r/20240205145055.3545806-2-terry.tritton@linaro.org Fixes: 16a45b57cbf2 ("selftests/mm: add framework for uffd-unit-test") Signed-off-by: Terry Tritton <terry.tritton@linaro.org> Cc: Peter Griffin <peter.griffin@linaro.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01tools: selftests: riscv: Fix compile warnings in mm testsChristoph Müllner1-0/+3
[ Upstream commit 12c16919652b5873f524c8b361336ecfa5ce5e6b ] When building the mm tests with a riscv32 compiler, we see a range of shift-count-overflow errors from shifting 1UL by more than 32 bits in do_mmaps(). Since, the relevant code is only called from code that is gated by `__riscv_xlen == 64`, we can just apply the same gating to do_mmaps(). Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20231123185821.2272504-6-christoph.muellner@vrull.eu Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01tools: selftests: riscv: Fix compile warnings in vector testsChristoph Müllner2-3/+3
[ Upstream commit e1baf5e68ed128c1e22ba43e5190526d85de323c ] GCC prints a couple of format string warnings when compiling the vector tests. Let's follow the recommendation in Documentation/printk-formats.txt to fix these warnings. Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20231123185821.2272504-5-christoph.muellner@vrull.eu Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23selftests: mptcp: add mptcp_lib_kill_waitGeliang Tang3-28/+22
commit bdbef0a6ff10603895b0ba39f56bf874cb2b551a upstream. To avoid duplicated code in different MPTCP selftests, we can add and use helpers defined in mptcp_lib.sh. Export kill_wait() helper in userspace_pm.sh into mptcp_lib.sh and rename it as mptcp_lib_kill_wait(). It can be used to instead of kill_wait() in mptcp_join.sh. Use the new helper in both scripts. Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-9-8d6b94150f6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23selftests: mptcp: allow changing subtests prefixMatthieu Baerts (NGI0)1-1/+1
commit de46d138e7735eded9756906747fd3a8c3a42225 upstream. If a CI executes the same selftest multiple times with different options, all results from the same subtests will have the same title, which confuse the CI. With the same title printed in TAP, the tests are considered as the same ones. Now, it is possible to override this prefix by using MPTCP_LIB_KSFT_TEST env var, and have a different title. While at it, use 'basename' to remove the suffix as well instead of using an extra 'sed'. Fixes: c4192967e62f ("selftests: mptcp: lib: format subtests results in TAP") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-7-4c1c11e571ff@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23selftests: mptcp: increase timeout to 30 minMatthieu Baerts (NGI0)1-1/+1
commit 4d4dfb2019d7010efb65926d9d1c1793f9a367c6 upstream. On very slow environments -- e.g. when QEmu is used without KVM --, mptcp_join.sh selftest can take a bit more than 20 minutes. Bump the default timeout by 50% as it seems normal to take that long on some environments. When a debug kernel config is used, this selftest will take even longer, but that's certainly not a common test env to consider for the timeout. The Fixes tag that has been picked here is there simply to help having this patch backported to older stable versions. It is difficult to point to the exact commit that made some env reaching the timeout from time to time. Fixes: d17b968b9876 ("selftests: mptcp: increase timeout to 20 minutes") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-5-4c1c11e571ff@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23selftests: mptcp: add missing kconfig for NF MangleMatthieu Baerts (NGI0)1-0/+1
commit 2d41f10fa497182df9012d3e95d9cea24eb42e61 upstream. Since the commit mentioned below, 'mptcp_join' selftests is using IPTables to add rules to the Mangle table, only in IPv4. This KConfig is usually enabled by default in many defconfig, but we recently noticed that some CI were running our selftests without them enabled. Fixes: b6e074e171bc ("selftests: mptcp: add infinite map testcase") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-4-4c1c11e571ff@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23selftests: mptcp: add missing kconfig for NF Filter in v6Matthieu Baerts (NGI0)1-0/+1
commit 8c86fad2cecdc6bf7283ecd298b4d0555bd8b8aa upstream. Since the commit mentioned below, 'mptcp_join' selftests is using IPTables to add rules to the Filter table for IPv6. It is then required to have IP6_NF_FILTER KConfig. This KConfig is usually enabled by default in many defconfig, but we recently noticed that some CI were running our selftests without them enabled. Fixes: 523514ed0a99 ("selftests: mptcp: add ADD_ADDR IPv6 test cases") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-3-4c1c11e571ff@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23selftests: mptcp: add missing kconfig for NF FilterMatthieu Baerts (NGI0)1-0/+1
commit 3645c844902bd4e173d6704fc2a37e8746904d67 upstream. Since the commit mentioned below, 'mptcp_join' selftests is using IPTables to add rules to the Filter table. It is then required to have IP_NF_FILTER KConfig. This KConfig is usually enabled by default in many defconfig, but we recently noticed that some CI were running our selftests without them enabled. Fixes: 8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23selftests: mm: fix map_hugetlb failure on 64K page size systemsNico Pache1-0/+7
commit 91b80cc5b39f00399e8e2d17527cad2c7fa535e2 upstream. On systems with 64k page size and 512M huge page sizes, the allocation and test succeeds but errors out at the munmap. As the comment states, munmap will failure if its not HUGEPAGE aligned. This is due to the length of the mapping being 1/2 the size of the hugepage causing the munmap to not be hugepage aligned. Fix this by making the mapping length the full hugepage if the hugepage is larger than the length of the mapping. Link: https://lkml.kernel.org/r/20240119131429.172448-1-npache@redhat.com Signed-off-by: Nico Pache <npache@redhat.com> Cc: Donet Tom <donettom@linux.vnet.ibm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23selftests/mm: Update va_high_addr_switch.sh to check CPU for la57 flagAudra Mitchell1-0/+6
commit 52e63d67b5bb423b33d7a262ac7f8bd375a90145 upstream. In order for the page table level 5 to be in use, the CPU must have the setting enabled in addition to the CONFIG option. Check for the flag to be set to avoid false test failures on systems that do not have this cpu flag set. The test does a series of mmap calls including three using the MAP_FIXED flag and specifying an address that is 1<<47 or 1<<48. These addresses are only available if you are using level 5 page tables, which requires both the CPU to have the capabiltiy (la57 flag) and the kernel to be configured. Currently the test only checks for the kernel configuration option, so this test can still report a false positive. Here are the three failing lines: $ ./va_high_addr_switch | grep FAILED mmap(ADDR_SWITCH_HINT, 2 * PAGE_SIZE, MAP_FIXED): 0xffffffffffffffff - FAILED mmap(HIGH_ADDR, MAP_FIXED): 0xffffffffffffffff - FAILED mmap(ADDR_SWITCH_HINT, 2 * PAGE_SIZE, MAP_FIXED): 0xffffffffffffffff - FAILED I thought (for about a second) refactoring the test so that these three mmap calls will only be run on systems with the level 5 page tables available, but the whole point of the test is to check the level 5 feature... Link: https://lkml.kernel.org/r/20240119205801.62769-1-audra@redhat.com Fixes: 4f2930c6718a ("selftests/vm: only run 128TBswitch with 5-level paging") Signed-off-by: Audra Mitchell <audra@redhat.com> Cc: Rafael Aquini <raquini@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Adam Sindelar <adam@wowsignal.io> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23selftests/mm: switch to bash from shMuhammad Usama Anjum2-2/+2
commit bc29036e1da1cf66e5f8312649aeec2d51ea3d86 upstream. Running charge_reserved_hugetlb.sh generates errors if sh is set to dash: ./charge_reserved_hugetlb.sh: 9: [[: not found ./charge_reserved_hugetlb.sh: 19: [[: not found ./charge_reserved_hugetlb.sh: 27: [[: not found ./charge_reserved_hugetlb.sh: 37: [[: not found ./charge_reserved_hugetlb.sh: 45: Syntax error: "(" unexpected Switch to using /bin/bash instead of /bin/sh. Make the switch for write_hugetlb_memory.sh as well which is called from charge_reserved_hugetlb.sh. Link: https://lkml.kernel.org/r/20240116090455.3407378-1-usama.anjum@collabora.com Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Shuah Khan <shuah@kernel.org> Cc: David Laight <David.Laight@ACULAB.COM> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23selftests/mm: ksm_tests should only MADV_HUGEPAGE valid memoryRyan Roberts1-1/+1
commit d021b442cf312664811783e92b3d5e4548e92a53 upstream. ksm_tests was previously mmapping a region of memory, aligning the returned pointer to a PMD boundary, then setting MADV_HUGEPAGE, but was setting it past the end of the mmapped area due to not taking the pointer alignment into consideration. Fix this behaviour. Up until commit efa7df3e3bb5 ("mm: align larger anonymous mappings on THP boundaries"), this buggy behavior was (usually) masked because the alignment difference was always less than PMD-size. But since the mentioned commit, `ksm_tests -H -s 100` started failing. Link: https://lkml.kernel.org/r/20240122120554.3108022-1-ryan.roberts@arm.com Fixes: 325254899684 ("selftests: vm: add KSM huge pages merging time test") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23selftests: forwarding: Fix bridge locked port test flakinessIdo Schimmel1-2/+2
[ Upstream commit f97f1fcc96908c97a240ff6cb4474e155abfa0d7 ] The redirection test case fails in the netdev CI on debug kernels because an FDB entry is learned despite the presence of a tc filter that redirects incoming traffic [1]. I am unable to reproduce the failure locally, but I can see how it can happen given that learning is first enabled and only then the ingress tc filter is configured. On debug kernels the time window between these two operations is longer compared to regular kernels, allowing random packets to be transmitted and trigger learning. Fix by reversing the order and configure the ingress tc filter before enabling learning. [1] [...] # TEST: Locked port MAB redirect [FAIL] # Locked entry created for redirected traffic Fixes: 38c43a1ce758 ("selftests: forwarding: Add test case for traffic redirection from a locked port") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240208155529.1199729-5-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23selftests: forwarding: Suppress grep warningsIdo Schimmel1-3/+3
[ Upstream commit dd6b34589441f2ad4698dd88a664811550148b41 ] Suppress the following grep warnings: [...] INFO: # Port group entries configuration tests - (*, G) TEST: Common port group entries configuration tests (IPv4 (*, G)) [ OK ] TEST: Common port group entries configuration tests (IPv6 (*, G)) [ OK ] grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / TEST: IPv4 (*, G) port group entries configuration tests [ OK ] grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / TEST: IPv6 (*, G) port group entries configuration tests [ OK ] [...] They do not fail the test, but do clutter the output. Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240208155529.1199729-4-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23selftests: bridge_mdb: Use MDB get instead of dumpIdo Schimmel1-113/+71
[ Upstream commit e8bba9e83c88ea951dafd3319c97c55a52b3637d ] Test the new MDB get functionality by converting dump and grep to MDB get. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: dd6b34589441 ("selftests: forwarding: Suppress grep warnings") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23selftests: forwarding: Fix bridge MDB test flakinessIdo Schimmel1-2/+6
[ Upstream commit 7399e2ce4d424f426417496eb289458780eea985 ] After enabling a multicast querier on the bridge (like the test is doing), the bridge will wait for the Max Response Delay before starting to forward according to its MDB in order to let Membership Reports enough time to be received and processed. Currently, the test is waiting for exactly the default Max Response Delay (10 seconds) which is racy and leads to failures [1]. Fix by reducing the Max Response Delay to 1 second. [1] [...] # TEST: IPv4 host entries forwarding tests [FAIL] # Packet locally received after flood Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240208155529.1199729-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23selftests: forwarding: Fix layer 2 miss test flakinessIdo Schimmel1-2/+6
[ Upstream commit 93590849a05edffaefa11695fab98f621259ded2 ] After enabling a multicast querier on the bridge (like the test is doing), the bridge will wait for the Max Response Delay before starting to forward according to its MDB in order to let Membership Reports enough time to be received and processed. Currently, the test is waiting for exactly the default Max Response Delay (10 seconds) which is racy and leads to failures [1]. Fix by reducing the Max Response Delay to 1 second. [1] [...] # TEST: L2 miss - Multicast (IPv4) [FAIL] # Unregistered multicast filter was hit after adding MDB entry Fixes: 8c33266ae26a ("selftests: forwarding: Add layer 2 miss test cases") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240208155529.1199729-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23selftests: net: Fix bridge backup port test flakinessIdo Schimmel1-0/+23
[ Upstream commit 38ee0cb2a2e2ade077442085638eb181b0562971 ] The test toggles the carrier of a bridge port in order to test the bridge backup port feature. Due to the linkwatch delayed work the carrier change is not always reflected fast enough to the bridge driver and packets are not forwarded as the test expects, resulting in failures [1]. Fix by busy waiting on the bridge port state until it changes to the desired state following the carrier change. [1] # Backup port # ----------- [...] # TEST: swp1 carrier off [ OK ] # TEST: No forwarding out of swp1 [FAIL] [ 641.995910] br0: port 1(swp1) entered disabled state # TEST: No forwarding out of vx0 [ OK ] Fixes: b408453053fb ("selftests: net: Add bridge backup port and backup nexthop ID test") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240208123110.1063930-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23selftests/net: convert test_bridge_backup_port.sh to run it in unique namespaceHangbin Liu1-189/+182
[ Upstream commit 4624a78c18c62da815f3253966b7a87995f77e1b ] There is no h1 h2 actually. Remove it. Here is the test result after conversion. ]# ./test_bridge_backup_port.sh Backup port ----------- TEST: Forwarding out of swp1 [ OK ] TEST: No forwarding out of vx0 [ OK ] TEST: swp1 carrier off [ OK ] TEST: No forwarding out of swp1 [ OK ] ... Backup nexthop ID - ping ------------------------ TEST: Ping with backup nexthop ID [ OK ] TEST: Ping after disabling backup nexthop ID [ OK ] Backup nexthop ID - torture test -------------------------------- TEST: Torture test [ OK ] Tests passed: 83 Tests failed: 0 Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 38ee0cb2a2e2 ("selftests: net: Fix bridge backup port test flakiness") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23KVM: selftests: Fix a semaphore imbalance in the dirty ring logging testSean Christopherson1-23/+27
[ Upstream commit ba58f873cdeec30b6da48e28dd5782c5a3e1371b ] When finishing the final iteration of dirty_log_test testcase, set host_quit _before_ the final "continue" so that the vCPU worker doesn't run an extra iteration, and delete the hack-a-fix of an extra "continue" from the dirty ring testcase. This fixes a bug where the extra post to sem_vcpu_cont may not be consumed, which results in failures in subsequent runs of the testcases. The bug likely was missed during development as x86 supports only a single "guest mode", i.e. there aren't any subsequent testcases after the dirty ring test, because for_each_guest_mode() only runs a single iteration. For the regular dirty log testcases, letting the vCPU run one extra iteration is a non-issue as the vCPU worker waits on sem_vcpu_cont if and only if the worker is explicitly told to stop (vcpu_sync_stop_requested). But for the dirty ring test, which needs to periodically stop the vCPU to reap the dirty ring, letting the vCPU resume the guest _after_ the last iteration means the vCPU will get stuck without an extra "continue". However, blindly firing off an post to sem_vcpu_cont isn't guaranteed to be consumed, e.g. if the vCPU worker sees host_quit==true before resuming the guest. This results in a dangling sem_vcpu_cont, which leads to subsequent iterations getting out of sync, as the vCPU worker will continue on before the main task is ready for it to resume the guest, leading to a variety of asserts, e.g. ==== Test Assertion Failure ==== dirty_log_test.c:384: dirty_ring_vcpu_ring_full pid=14854 tid=14854 errno=22 - Invalid argument 1 0x00000000004033eb: dirty_ring_collect_dirty_pages at dirty_log_test.c:384 2 0x0000000000402d27: log_mode_collect_dirty_pages at dirty_log_test.c:505 3 (inlined by) run_test at dirty_log_test.c:802 4 0x0000000000403dc7: for_each_guest_mode at guest_modes.c:100 5 0x0000000000401dff: main at dirty_log_test.c:941 (discriminator 3) 6 0x0000ffff9be173c7: ?? ??:0 7 0x0000ffff9be1749f: ?? ??:0 8 0x000000000040206f: _start at ??:? Didn't continue vcpu even without ring full Alternatively, the test could simply reset the semaphores before each testcase, but papering over hacks with more hacks usually ends in tears. Reported-by: Shaoqin Huang <shahuang@redhat.com> Fixes: 84292e565951 ("KVM: selftests: Add dirty ring buffer test") Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Shaoqin Huang <shahuang@redhat.com> Link: https://lore.kernel.org/r/20240202231831.354848-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23KVM: selftests: Avoid infinite loop in hyperv_features when invtsc is missingVitaly Kuznetsov1-4/+5
[ Upstream commit 8ad4855273488c9bd5320b3fee80f66f0023f326 ] When X86_FEATURE_INVTSC is missing, guest_test_msrs_access() was supposed to skip testing dependent Hyper-V invariant TSC feature. Unfortunately, 'continue' does not lead to that as stage is not incremented. Moreover, 'vm' allocated with vm_create_with_one_vcpu() is not freed and the test runs out of available file descriptors very quickly. Fixes: bd827bd77537 ("KVM: selftests: Test Hyper-V invariant TSC control") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/20240129085847.2674082-1-vkuznets@redhat.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23KVM: selftests: Delete superfluous, unused "stage" variable in AMX testSean Christopherson1-2/+2
[ Upstream commit 46fee9e38995af9ae16a8cc7d05031486d44cf35 ] Delete the AMX's tests "stage" counter, as the counter is no longer used, which makes clang unhappy: x86_64/amx_test.c:224:6: error: variable 'stage' set but not used int stage, ret; ^ 1 error generated. Note, "stage" was never really used, it just happened to be dumped out by a (failed) assertion on run->exit_reason, i.e. the AMX test has no concept of stages, the code was likely copy+pasted from a different test. Fixes: c96f57b08012 ("KVM: selftests: Make vCPU exit reason test assertion common") Reviewed-by: Jim Mattson <jmattson@google.com> Link: https://lore.kernel.org/r/20240109220302.399296-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23selftests/landlock: Fix fs_test build with old libcHu Yadi1-3/+8
[ Upstream commit 40b7835e74e0383be308d528c5e0e41b3bf72ade ] One issue comes up while building selftest/landlock/fs_test on my side (gcc 7.3/glibc-2.28/kernel-4.19). gcc -Wall -O2 -isystem fs_test.c -lcap -o selftests/landlock/fs_test fs_test.c:4575:9: error: initializer element is not constant .mnt = mnt_tmp, ^~~~~~~ Signed-off-by: Hu Yadi <hu.yadi@h3c.com> Suggested-by: Jiao <jiaoxupo@h3c.com> Reviewed-by: Berlin <berlin@h3c.com> Link: https://lore.kernel.org/r/20240124022908.42100-1-hu.yadi@h3c.com Fixes: 04f9070e99a4 ("selftests/landlock: Add tests for pseudo filesystems") [mic: Factor out mount's data string and make mnt_tmp static] Signed-off-by: Mickaël Salaün <mic@digikod.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-16selftests: cmsg_ipv6: repeat the exact packetJakub Kicinski1-2/+2
[ Upstream commit 4b00d0c513da58b68df015968721b11396fe4ab3 ] cmsg_ipv6 test requests tcpdump to capture 4 packets, and sends until tcpdump quits. Only the first packet is "real", however, and the rest are basic UDP packets. So if tcpdump doesn't start in time it will miss the real packet and only capture the UDP ones. This makes the test fail on slow machine (no KVM or with debug enabled) 100% of the time, while it passes in fast environments. Repeat the "real" / expected packet. Fixes: 9657ad09e1fa ("selftests: net: test IPV6_TCLASS") Fixes: 05ae83d5a4a2 ("selftests: net: test IPV6_HOPLIMIT") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-16selftests: net: let big_tcp test cope with slow envPaolo Abeni1-1/+3
[ Upstream commit a19747c3b9bf6476cc36d0a3a5ef0ff92999169e ] In very slow environments, most big TCP cases including segmentation and reassembly of big TCP packets have a good chance to fail: by default the TCP client uses write size well below 64K. If the host is low enough autocorking is unable to build real big TCP packets. Address the issue using much larger write operations. Note that is hard to observe the issue without an extremely slow and/or overloaded environment; reduce the TCP transfer time to allow for much easier/faster reproducibility. Fixes: 6bb382bcf742 ("selftests: add a selftest for big tcp") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-16selftests: net: avoid just another constant waitPaolo Abeni1-5/+13
[ Upstream commit 691bb4e49c98a47bc643dd808453136ce78b15b4 ] Using hard-coded constant timeout to wait for some expected event is deemed to fail sooner or later, especially in slow env. Our CI has spotted another of such race: # TEST: ipv6: cleanup of cached exceptions - nexthop objects [FAIL] # can't delete veth device in a timely manner, PMTU dst likely leaked Replace the crude sleep with a loop looking for the expected condition at low interval for a much longer range. Fixes: b3cc4f8a8a41 ("selftests: pmtu: add explicit tests for PMTU exceptions cleanup") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/fd5c745e9bb665b724473af6a9373a8c2a62b247.1706812005.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-16selftests: net: fix tcp listener handling in pmtu.shPaolo Abeni1-1/+4
[ Upstream commit e71e016ad0f6e641a7898b8cda5f62f8e2beb2f1 ] The pmtu.sh test uses a few TCP listener in a problematic way: It hard-codes a constant timeout to wait for the listener starting-up in background. That introduces unneeded latency and on very slow and busy host it can fail. Additionally the test starts again the same listener in the same namespace on the same port, just after the previous connection completed. Fast host can attempt starting the new server before the old one really closed the socket. Address the issues using the wait_local_port_listen helper and explicitly waiting for the background listener process exit. Fixes: 136a1b434bbb ("selftests: net: test vxlan pmtu exceptions with tcp") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/f8e8f6d44427d8c45e9f6a71ee1a321047452087.1706812005.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-16selftests/net: change shebang to bash to support "source"Yujie Liu2-4/+4
[ Upstream commit 05d92cb0e919239c29b3a26da1f76f1e18fed7d3 ] The patch set [1] added a general lib.sh in net selftests, and converted several test scripts to source the lib.sh. unicast_extensions.sh (converted in [1]) and pmtu.sh (converted in [2]) have a /bin/sh shebang which may point to various shells in different distributions, but "source" is only available in some of them. For example, "source" is a built-it function in bash, but it cannot be used in dash. Refer to other scripts that were converted together, simply change the shebang to bash to fix the following issues when the default /bin/sh points to other shells. not ok 51 selftests: net: unicast_extensions.sh # exit=1 v1 -> v2: - Fix pmtu.sh which has the same issue as unicast_extensions.sh, suggested by Hangbin - Change the style of the "source" line to be consistent with other tests, suggested by Hangbin Link: https://lore.kernel.org/all/20231202020110.362433-1-liuhangbin@gmail.com/ [1] Link: https://lore.kernel.org/all/20231219094856.1740079-1-liuhangbin@gmail.com/ [2] Reported-by: kernel test robot <oliver.sang@intel.com> Fixes: 378f082eaf37 ("selftests/net: convert pmtu.sh to run it in unique namespace") Fixes: 0f4765d0b48d ("selftests/net: convert unicast_extensions.sh to run it in unique namespace") Signed-off-by: Yujie Liu <yujie.liu@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://lore.kernel.org/r/20231229131931.3961150-1-yujie.liu@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: e71e016ad0f6 ("selftests: net: fix tcp listener handling in pmtu.sh") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-16selftests/net: convert pmtu.sh to run it in unique namespaceHangbin Liu1-18/+9
[ Upstream commit 378f082eaf3760cd7430fbcb1e4f8626bb6bc0ae ] pmtu test use /bin/sh, so we need to source ./lib.sh instead of lib.sh Here is the test result after conversion. # ./pmtu.sh TEST: ipv4: PMTU exceptions [ OK ] TEST: ipv4: PMTU exceptions - nexthop objects [ OK ] TEST: ipv6: PMTU exceptions [ OK ] TEST: ipv6: PMTU exceptions - nexthop objects [ OK ] ... TEST: ipv4: list and flush cached exceptions - nexthop objects [ OK ] TEST: ipv6: list and flush cached exceptions [ OK ] TEST: ipv6: list and flush cached exceptions - nexthop objects [ OK ] TEST: ipv4: PMTU exception w/route replace [ OK ] TEST: ipv4: PMTU exception w/route replace - nexthop objects [ OK ] TEST: ipv6: PMTU exception w/route replace [ OK ] TEST: ipv6: PMTU exception w/route replace - nexthop objects [ OK ] Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: e71e016ad0f6 ("selftests: net: fix tcp listener handling in pmtu.sh") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-16selftests/net: convert unicast_extensions.sh to run it in unique namespaceHangbin Liu1-53/+46
[ Upstream commit 0f4765d0b48d90ede9788c7edb2e072eee20f88e ] Here is the test result after conversion. # ./unicast_extensions.sh /usr/bin/which: no nettest in (/root/.local/bin:/root/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin) ########################################################################### Unicast address extensions tests (behavior of reserved IPv4 addresses) ########################################################################### TEST: assign and ping within 240/4 (1 of 2) (is allowed) [ OK ] TEST: assign and ping within 240/4 (2 of 2) (is allowed) [ OK ] TEST: assign and ping within 0/8 (1 of 2) (is allowed) [ OK ] ... TEST: assign and ping class D address (is forbidden) [ OK ] TEST: routing using class D (is forbidden) [ OK ] TEST: routing using 127/8 (is forbidden) [ OK ] Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: e71e016ad0f6 ("selftests: net: fix tcp listener handling in pmtu.sh") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-16selftests: net: cut more slack for gro fwd tests.Paolo Abeni2-3/+13
[ Upstream commit cb9f4a30fb85e1f4f149ada595a67899adb3db19 ] The udpgro_fwd.sh self-tests are somewhat unstable. There are a few timing constraints the we struggle to meet on very slow environments. Instead of skipping the whole tests in such envs, increase the test resilience WRT very slow hosts: increase the inter-packets timeouts, avoid resetting the counters every second and finally disable reduce the background traffic noise. Tested with: for I in $(seq 1 100); do ./tools/testing/selftests/kselftest_install/run_kselftest.sh \ -t net:udpgro_fwd.sh || exit -1 done in a slow environment. Fixes: a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/f4b6b11064a0d39182a9ae6a853abae3e9b4426a.1706812005.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests/bpf: Remove flaky test_btf_id testYonghong Song1-5/+0
commit 56925f389e152dcb8d093435d43b78a310539c23 upstream. With previous patch, one of subtests in test_btf_id becomes flaky and may fail. The following is a failing example: Error: #26 btf Error: #26/174 btf/BTF ID Error: #26/174 btf/BTF ID btf_raw_create:PASS:check 0 nsec btf_raw_create:PASS:check 0 nsec test_btf_id:PASS:check 0 nsec ... test_btf_id:PASS:check 0 nsec test_btf_id:FAIL:check BTF lingersdo_test_get_info:FAIL:check failed: -1 The test tries to prove a btf_id not available after the map is closed. But btf_id is freed only after workqueue and a rcu grace period, compared to previous case just after a rcu grade period. Depending on system workload, workqueue could take quite some time to execute function bpf_map_free_deferred() which may cause the test failure. Instead of adding arbitrary delays, let us remove the logic to check btf_id availability after map is closed. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20231214203820.1469402-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-05selftests: net: enable some more knobsPaolo Abeni1-0/+3
[ Upstream commit c15a729c9d45aa142fb01a3afee822ab1f0e62a8 ] The rtnetlink tests require additional options currently off by default. Fixes: 2766a11161cc ("selftests: rtnetlink: add ipsec offload API test") Fixes: 5e596ee171ba ("selftests: add xfrm state-policy-monitor to rtnetlink.sh") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/9048ca58e49b962f35dba1dfb2beaf3dab3e0411.1706723341.git.pabeni@redhat.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: net: add missing config for NF_TARGET_TTLJakub Kicinski1-0/+1
[ Upstream commit 1939f738c73dfdb8389839bdc9624c765e3326e6 ] amt test uses the TTL iptables module: ip netns exec "${RELAY}" iptables -t mangle -I PREROUTING \ -d 239.0.0.1 -j TTL --ttl-set 2 Fixes: c08e8baea78e ("selftests: add amt interface selftest script") Link: https://lore.kernel.org/r/20240131165605.4051645-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: bonding: Check initial stateBenjamin Poirier1-0/+11
[ Upstream commit 8cc063ae1b3dbe416ce62a15d49af4c2314b45fe ] The purpose of the test_LAG_cleanup() function is to check that some hardware addresses are removed from underlying devices after they have been unenslaved. The test function simply checks that those addresses are not present at the end. However, if the addresses were never added to begin with due to some error in device setup, the test function currently passes. This is a false positive since in that situation the test did not actually exercise the intended functionality. Add a check that the expected addresses are indeed present after device setup. This makes the test function more robust. I noticed this problem when running the team/dev_addr_lists.sh test on a system without support for dummy and ipv6: tools/testing/selftests/drivers/net/team# ./dev_addr_lists.sh Error: Unknown device type. Error: Unknown device type. This program is not intended to be run as root. RTNETLINK answers: Operation not supported TEST: team cleanup mode lacp [ OK ] Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Link: https://lore.kernel.org/r/20240131140848.360618-3-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-21 07:00:04 +0300