| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"tools/cpupower: display residency value in idle-info" added a new
function to cpuidle.h. This patch adds them to the bindings.
Link: https://lore.kernel.org/linux-pm/20240809083728.266697-1-aboorvad@linux.ibm.com/
Tested by compiling both libcpupower and the headers; running the test
script that does not use the functions as a basic sanity test.
Link: https://lore.kernel.org/r/20250108221852.30771-1-jwyatt@redhat.com
Signed-off-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Signed-off-by: "John B. Wyatt IV" <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
"cpupower: Add support for showing energy performance preference" added
two new functions to cpufreq.h. This patch adds them to the bindings.
Link: https://lore.kernel.org/linux-pm/8dc731c3-6586-4265-ae6a-d93ed219a963@linuxfoundation.org/T/#t
Tested by compiling both libcpupower and the headers; running the test
script that does not use the functions as a basic sanity test.
Link: https://lore.kernel.org/r/20241224062329.39606-1-jwyatt@redhat.com
Signed-off-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Signed-off-by: "John B. Wyatt IV" <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Installs the .so and .py files generated by SWIG to system's site packages
directory. This allows the Python bindings to be used system wide. This
commit also includes documentation on setting up and installing the Python
bindings.
Link: https://lore.kernel.org/r/20241219012606.38963-1-jwyatt@redhat.com
Signed-off-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Signed-off-by: "John B. Wyatt IV" <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The amd-pstate section is grouped under boost, which isn't appropriate.
Adjust the indentation so that it is it's own section.
Link: https://lore.kernel.org/r/20241218191144.3440854-8-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When EPP has been enabled the hardware will autonomously change
frequencies on it's own and thus there is no latency with changing
from the kernel.
Avoid doing the maximum latency check when EPP is found. This will
apply to both amd-pstate and intel-pstate drivers.
Link: https://lore.kernel.org/r/20241218191144.3440854-7-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The EPP value is useful for characterization of performance. Show
it in cpupower frequency-info output.
Link: https://lore.kernel.org/r/20241218191144.3440854-6-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When the amd-pstate is in use frequency is set by the hardware and
measured by the kernel through using the aperf and mperf registers.
There is no direct call to the hardware to indicate current frequency.
Detect that this feature is in use and skip the check.
Link: https://lore.kernel.org/r/20241218191144.3440854-5-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The rankings are useful information to determine if the scheduler
is placing tasks appropriately for the hardware.
Link: https://lore.kernel.org/r/20241218191144.3440854-4-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When cpufreq_get_sysfs_value_from_table() is passed a table with
kernel strings that report 'enabled' or 'disabled' it always returns 0
because these can't cleanly convert to integers.
Explicitly look for enabled or disabled strings from the kernel to handle
this.
Link: https://lore.kernel.org/r/20241218191144.3440854-3-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
print_duration() has a return; statement at the end of the function
that is not necessary as it's a void function.
Link: https://lore.kernel.org/r/20241218191144.3440854-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit 'cpupower: Make TSC read per CPU for Mperf monitor' (c2adb1877b7)
changes TSC counter reads per cpu, but left time diff global (from start
of all cpus to end of all cpus), thus diff(time) is too large for a
cpu's tsc counting, resulting in far less than acutal TSC_Mhz and thus
`cpupower monitor` showing far less than actual cpu realtime frequency.
/proc/cpuinfo shows frequency:
cat /proc/cpuinfo | egrep -e 'processor' -e 'MHz'
...
processor : 171
cpu MHz : 4108.498
...
before fix (System 100% busy):
| Mperf || Idle_Stats
CPU| C0 | Cx | Freq || POLL | C1 | C2
171| 0.77| 99.23| 2279|| 0.00| 0.00| 0.00
after fix (System 100% busy):
| Mperf || Idle_Stats
CPU| C0 | Cx | Freq || POLL | C1 | C2
171| 0.46| 99.54| 4095|| 0.00| 0.00| 0.00
Fixes: c2adb1877b76 ("cpupower: Make TSC read per CPU for Mperf monitor")
Signed-off-by: He Rongguang <herongguang@linux.alibaba.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The is_valid flag should reflect the validity state of both
the XXX_start and XXX_stop functions. But the use of '=' in
XXX_stop overwrites the validity state set by XXX_start. This
commit changes '=' to '|=' in XXX_stop to preserve and combine
the validity state of XXX_start and XXX_stop.
Signed-off-by: wangfushuai <wangfushuai@baidu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f79473ed9220 ("pm: cpupower: Makefile: Allow overriding
cross-compiling env params") we would fail to cross compile cpupower in
buildroot which uses the recipe at [1] where only the CROSS variable is
being set.
The issue here is the use of the lazy evaluation for all variables: CC,
LD, AR, STRIP, RANLIB, rather than just CROSS.
[1]:
https://git.buildroot.net/buildroot/tree/package/linux-tools/linux-tool-cpupower.mk.in
Fixes: f79473ed9220 ("pm: cpupower: Makefile: Allow overriding cross-compiling env params")
Reported-by: Florian Fainelli <florian.fainelli@broadcom.com>
Closes: https://lore.kernel.org/all/2bbabd2c-24ef-493c-a199-594e5dada3da@broadcom.com/
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Check whether xgettext and msgfmt are available on the system before
attempting to generate GNU gettext Language Translations.
In case of missing dependency, generate error message directing user
to install the necessary package.
Tested-by: John B. Wyatt IV <jwyatt@redhat.com>
Tested-by: John B. Wyatt IV <sageofredondo@gmail.com>
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Siddharth Menon <simeddon@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add Chinese Simplified translations for cpufrequtils package.
Signed-off-by: Kieran Moy <kfatyuip@gmail.com>
Reviewed-by: Candice Cheng <ccheng@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add a simple test to confirm and print out the cpu state.
Signed-off-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Signed-off-by: "John B. Wyatt IV" <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This commit fixes a bad comment, removes an unneeded code block, and
catches a few more states that cpuidle_state_disable with the test
script. Part of the motivation for this commit was I kept forgetting to
use sudo.
Signed-off-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Signed-off-by: "John B. Wyatt IV" <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
A compile_commands.json file is used by the LSP in tools like VSCode and
Neovim to look up function and type information. The file is specific to
the state of the current system; add it to the gitignore.
Note: the kernel root's gitignore has a similar entry:
/compile_commands.json
I am not sure why they use '/' for a file as it is used for directories.
Signed-off-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Signed-off-by: "John B. Wyatt IV" <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Allow overriding the cross-comple env parameters to make it
easier for Yocto users. Then cross-compiler toolchains to build
cpupower with only two steps:
- source (toolchain path)/environment-setup-armv8a-poky-linux
- make
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Print out the config file path when fopen failed. It will be easy
for users to know where to create the file.
Since we are here, use strerror to drop the usage of perror.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The 'cpupower-set' tool has been enhanced with new features:
commit f2ab5557119a ("cpupower: Add EPP value change support")
commit df8776b03689 ("cpupower: Add support for amd_pstate mode change")
commit eb426fc6bdd6 ("cpupower: Add turbo-boost support in cpupower")
However, the corresponding manpage was never updated.
Add a basic description of these new options to the existing manpage.
Commit description updated to fix checkpatch errors: Shuah Khan
Signed-off-by: Tor Vic <torvic9@mailbox.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add SPDX identifier to the gitignore. Remove the comment and .i file
since the file it references was removed in another patch. This patch
depends on Min-Hua Chen's 'pm: cpupower: rename raw_pylibcpupower.i'.
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The raw_pylibcpupower.i is removed unexpectedly after 'make mrproper'
We can reproduce the error by performing the following steps:
cd linux-next
make mrproper
cd tools/power/cpupower/bindings/python
make
We will get an error message:
make: *** No rule to make target 'raw_pylibcpupower.i', needed by 'raw_pylibcpupower_wrap.c'. Stop.
The root cause:
The *.i files are already used for pre-processor output files and
the kernel removes all the *.i files by 'make mrproper'.
That explains why the raw_pylibcpupower.i is removed by 'make mrproper'.
To fix it, Follow John's suggestion to rename raw_pylibcpupower.i to
raw_pylibcpupower.swg.
See:
https://www.swig.org/Doc4.2/SWIG.html
Reviewed-by: John B. Wyatt IV <jwyatt@redhat.com>
Reviewed-by: John B. Wyatt IV <sageofredondo@gmail.com>
Tested-by: John B. Wyatt IV <jwyatt@redhat.com>
Tested-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add error message to better explain to the user when SWIG and
python-config is missing from the path. Makefile was cleaned up
and unneeded elements were removed.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This script demonstrates how to make use of, and tests, the bindings.
In the future, this script could become part of a larger test suite to
test the bindings and libcpupower.
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
SWIG is a tool packaged in Fedora and other distros that can generate
bindings from C and C++ code for several languages including Python,
Perl, and Go.
These bindings allows users to easily write scripts that use and extend
libcpupower's functionality. Currently, only Python is provided in the
makefile, but additional languages may be added if there is demand.
Added suggestions from Shuah Khan for the README and license discussion.
Note that while SWIG itself is GPL v3+ licensed; the resulting output,
the bindings code, is permissively licensed + the license of the .o
files. Please see
https://swig.org/legal.html and [1] for more details.
[1]
https://lore.kernel.org/linux-pm/Zqv9BOjxLAgyNP5B@hatbackup/
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
There was a symbol listed in the powercap.h file that was not implemented.
Implement it with a stub return of 0.
Programs like SWIG require that functions that are defined in the
headers be implemented.
Fixes: c2294c1496b7 ("cpupower: Introduce powercap intel-rapl library and powercap-info command")
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Update cpuidle tool to display the residency value of cpuidle
states. This addition provides a clearer and more detailed view
of idle state information when using cpuidle-info.
--------------------------------
Before Patch:
--------------------------------
$ cpupower idle-info
CPUidle driver: intel_idle
CPUidle governor: menu
analyzing CPU 28:
Number of idle states: 3
Available idle states: POLL C1 C1E
POLL:
Flags/Description: CPUIDLE CORE POLL IDLE
Latency: 0
Usage: 7448
Duration: 207170
C1:
Flags/Description: MWAIT 0x00
Latency: 2
Usage: 7023
Duration: 3736853
C1E:
Flags/Description: MWAIT 0x01
Latency: 10
Usage: 18468
Duration: 11396212
--------------------------------
After Patch:
--------------------------------
$ cpupower idle-info
CPUidle driver: intel_idle
CPUidle governor: menu
analyzing CPU 12:
Number of idle states: 3
Available idle states: POLL C1 C1E
POLL:
Flags/Description: CPUIDLE CORE POLL IDLE
Latency: 0
Residency: 0
Usage: 1950
Duration: 38458
C1:
Flags/Description: MWAIT 0x00
Latency: 2
Residency: 2
Usage: 10688
Duration: 7133020
C1E:
Flags/Description: MWAIT 0x01
Latency: 10
Residency: 20
Usage: 22356
Duration: 15687259
--------------------------------
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Invocation the tool built with the default settings fails:
$ cpupower
cpupower: error while loading shared libraries: libcpupower.so.1: cannot
open shared object file: No such file or directory
The issue is that Makefile puts the library to "/usr/lib64" dir for a 64
bit machine. This is wrong. According to the "File hierarchy standard
specification:
https://en.wikipedia.org/wiki/Filesystem_Hierarchy_Standard
https://refspecs.linuxfoundation.org/FHS_3.0/fhs-3.0.pdf
"/usr/lib<qual>" dirs are intended for alternative-format libraries
(e.g., "/usr/lib32" for 32-bit libraries on a 64-bit machine (optional)).
The utility is built for the current machine and doesn't handle
'CROSS_COMPILE' and 'ARCH' env variables. It also doesn't change bit
depth. So the result is always the same - binary for x86_64
architecture. Therefore the library should be put in the '/usr/lib'
dir regardless of the build options.
This is the case for all the distros that comply with the
'File Hierarchy Standard 3.0" by Linux Foundation. Most of the distros
comply with it. For example, one can check this by examining the
"/usr/lb64" dir on debian-based distros and find that it contains only
"/usr/lib64/ld-linux-x86-64.so.2". And examine that "/usr/lib" contains
both 32 and 64 bit code:
find /usr/lib -name "*.so*" -type f | xargs file | grep 32-bit
find /usr/lib -name "*.so*" -type f | xargs file | grep 64-bit
Fix the issue by changing library destination dir to "/usr/lib".
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Execution of the 'make' command in the 'bench' subfolder causes the
following error:
$ make O=cpupower/build/ DESTDIR=cpupower/install/ -j8
" CC " cpupower/build//main.o
" CC " cpupower/build//parse.o
/bin/sh: 1: " CC "cpupower/build//system.o
CC : not found
make: *** [Makefile:21: cpupower/build//main.o] Error 127
make: *** Waiting for unfinished jobs....
/bin/sh: 1: CC : not found
/bin/sh: 1: CC : not found
make: *** [Makefile:21: cpupower/build//parse.o] Error 127
make: *** [Makefile:21: cpupower/build//system.o] Error 127
The makefile uses variables defined in the main project makefile and it
is not intended to run standalone. The reason is that 'bench' subproject
depends on the 'libcpupower' library, see the 'compile-bench' target in
the main makefile.
Add a check that prevents standalone execution of the 'bench' makefile.
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
There is a type 'enum operation_mode_e' contains the display modes of
the 'monitor' subcommand. This type isn't used though, instead the
variable 'mode' is of a simple 'int' type.
Change 'mode' variable type from 'int' to 'enum operation_mode_e' in
order to improve compiler type checking.
Built and tested this with different monitor cmdline params. Everything
works as expected, that is nothing changed and no regressions encountered.
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Remove not supported '-v' parameter from the cpupower's 'monitor'
command description.
There is a '-v' parameter described in cpupower's 'monitor' command man
page. It isn't supported at the moment, and perhaps has never been
supported. When I run the monitor with this parameter I get the
following:
$ sudo LD_LIBRARY_PATH=lib64/ bin/cpupower monitor -v
monitor: invalid option -- 'v'
invalid or unknown argument
$ sudo LD_LIBRARY_PATH=lib64/ bin/cpupower monitor -V
monitor: invalid option -- 'V'
invalid or unknown argument
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Enhance cpupower build process description with the information on
building and installing the utility to the user defined directories
as well as with the information on the way of running the utility from
the custom defined installation directory.
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Make "cpupower" building process more user friendly by adding 'help'
target to the main makefile. This target describes various build
and cleaning options available to the user.
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Replace a dead reference link to a turbo boost technology description with
a reference to a root page of the technology on the Intel site, and add
another one, describing power management technology, which includes short
description of the turbo boost.
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Update cpupower's P-State frequency calculation and reporting with AMD
Family 1Ah+ processors, when using the acpi-cpufreq driver. This is due
to a change in the PStateDef MSR layout in AMD Family 1Ah+.
Tested on 4th and 5th Gen AMD EPYC system
Signed-off-by: Ananth Narayan <Ananth.Narayan@amd.com>
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
cpupower-frequency-info.1 man page type is incorrect for
related-cpus. Fix it.
utils/cpufreq-info.c
{"related-cpus", no_argument, NULL, 'r'},
{"affected-cpus", no_argument, NULL, 'a'},
Fixed changelog before applying:
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jan Kratochvil <jan@jankratochvil.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Allow user to specify outside CFLAGS values as make argument
Corrects an issue where CFLAGS is passed as a make argument for
cpupower, but bench's makefile does not inherit and append to them.
Signed-off-by: Stanley Chan <schan@cloudflare.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This file was renamed from .txt to .rst and left a dangling reference.
Fix it.
Fixes: 151f4e2bdc7a ("docs: power: convert docs to ReST and rename to *.rst")
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit 4680b734e729 ("cpupower: Add Georgian translation") added
new language support. This change didn't add "ka" to Makefile
LANGUAGES variable. Add it now.
Reported-by: Temuri Doghonadze <temuri.doghonadze@gmail.com>
Reported-by: Zurab Kargareteli <zuraxt@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
For both the d and e options in 'cpupower idle_set' command, an
atoi() conversion is done without checking if the input argument
is all numeric. So, an atoi conversion is done on any character
provided as input and the CPU idle_set operation continues with
that integer value, which may not be what is intended or entirely
correct.
The output of cpuidle-set before patch is as follows:
[root@xxx cpupower]# cpupower idle-set -e 1$
Idlestate 1 enabled on CPU 0
[snip]
Idlestate 1 enabled on CPU 47
[root@xxx cpupower]# cpupower idle-set -e 11
Idlestate 11 not available on CPU 0
[snip]
Idlestate 11 not available on CPU 47
[root@xxx cpupower]# cpupower idle-set -d 12
Idlestate 12 not available on CPU 0
[snip]
Idlestate 12 not available on CPU 47
[root@xxx cpupower]# cpupower idle-set -d qw
Idlestate 0 disabled on CPU 0
[snip]
Idlestate 0 disabled on CPU 47
This patch adds a check for both d and e options in cpuidle-set.c
to see that the idle_set value is all numeric before doing a
string-to-int conversion using strtol().
The output of cpuidle-set after the patch is as below:
[root@xxx cpupower]# ./cpupower idle-set -e 1$
Bad idle_set value: 1$. Integer expected
[root@xxx cpupower]# ./cpupower idle-set -e 11
Idlestate 11 not available on CPU 0
[snip]
Idlestate 11 not available on CPU 47
[root@xxx cpupower]# ./cpupower idle-set -d 12
Idlestate 12 not available on CPU 0
[snip]
Idlestate 12 not available on CPU 47
[root@xxx cpupower]# ./cpupower idle-set -d qw
Bad idle_set value: qw. Integer expected
Signed-off-by: Brahadambal Srinivasan <latha@linux.vnet.ibm.com>
Signed-off-by: Likhitha Korrapati <likhitha@linux.ibm.com>
Tested-by: Pavithra Prakash <pavrampu@linux.vnet.ibm.com>
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
If boost sysfs (/sys/devices/system/cpu/cpufreq/boost) file is present
turbo-boost is feature is supported in the hardware. By default this
feature should be enabled. But to disable/enable it write to the sysfs
file. Use the same to control this feature via cpupower.
To enable:
cpupower set --turbo-boost 1
To disable:
cpupower set --turbo-boost 0
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
amd_pstate supports changing of its mode dynamically via `status` sysfs
file. Add the same capability in cpupower. To change the mode to active
mode use below command:
cpupower set --amd-pstate-mode active
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
amd_pstate and intel_pstate active mode drivers support energy
performance preference feature. Through this user can convey it's
energy/performance preference to platform. Add this value change
capability to cpupower.
To change the EPP value use below command:
cpupower set --epp performance
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Perry Yuan <Perry.Yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add is_valid_path API to check whether the sysfs file is present or not.
Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Perry Yuan <Perry.Yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
amd-pstate active mode driver name is "amd-pstate-epp". Use common
prefix for string matching condition to recognise amd-pstate active mode
driver.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Perry Yuan <Perry.Yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Several functions in the libcpupower API are renamed or removed in
Linux 4.7. This is an backward-incompatible ABI change, so the
library soname should change from libcpupower.so.0 to
libcpupower.so.1.
Fixes: ac5a181d065d ("cpupower: Add cpuidle parts into library")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
System-wide TSC read could cause a drift in C0 percentage calculation.
Because if first TSC is read and then one by one mperf is read for all
cpus, this introduces drift between mperf reading of later CPUs and TSC
reading. To lower this drift read TSC per CPU and also just after mperf
read. This technique improves C0 percentage calculation in Mperf monitor.
Before fix: (System 100% busy)
| Mperf || RAPL || Idle_Stats
PKG|CORE| CPU| C0 | Cx | Freq || pack | core || POLL | C1 | C2
0| 0| 0| 87.15| 12.85| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 0| 256| 84.62| 15.38| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 1| 1| 87.15| 12.85| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 1| 257| 84.08| 15.92| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 2| 2| 86.61| 13.39| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 2| 258| 83.26| 16.74| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 3| 3| 86.61| 13.39| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 3| 259| 83.60| 16.40| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 4| 4| 86.33| 13.67| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 4| 260| 83.33| 16.67| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 5| 5| 86.06| 13.94| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 5| 261| 83.05| 16.95| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 6| 6| 85.51| 14.49| 2695||168659003|3970468|| 0.00| 0.00| 0.00
After fix: (System 100% busy)
| Mperf || RAPL || Idle_Stats
PKG|CORE| CPU| C0 | Cx | Freq || pack | core || POLL | C1 | C2
0| 0| 0| 98.03| 1.97| 2415||163295480|3811189|| 0.00| 0.00| 0.00
0| 0| 256| 98.50| 1.50| 2394||163295480|3811189|| 0.00| 0.00| 0.00
0| 1| 1| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00
0| 1| 257| 99.99| 0.01| 2375||163295480|3811189|| 0.00| 0.00| 0.00
0| 2| 2| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00
0| 2| 258|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00
0| 3| 3|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00
0| 3| 259| 99.99| 0.01| 2435||163295480|3811189|| 0.00| 0.00| 0.00
0| 4| 4|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00
0| 4| 260|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00
0| 5| 5| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00
0| 5| 261|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00
0| 6| 6|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00
0| 6| 262|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00
Cc: Thomas Renninger <trenn@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Fixes: 7fe2f6399a84 ("cpupowerutils - cpufrequtils extended with quite some features")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The sysfs_get_enabled() opened file processor not closed,
may cause a file handle leak.
Putting error handling and resource cleanup code together
makes the code easy to maintain and read.
Removed the unnecessary else if branch from the original
function, as it should return an error in cases other than '0'.
Signed-off-by: Hao Zeng <zenghao@kylinos.cn>
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
rapl domain
This CPU power monitor shows the power consumption
as exposed by the powercap subsystem, cmp with:
Documentation/power/powercap/powercap.rst
cpupower monitor -m RAPL
| RAPL
CPU| pack | core | unco
0|6853926|967832|442381
8|6853926|967832|442381
1|6853926|967832|442381
9|6853926|967832|442381
Unfortunately RAPL domains cannot be directly mapped to the corresponding
CPU socket/package, core it belongs to.
Not sure this is possible at all with the current data exposed from the
kernel.
Still it can be worthful information for developers trying to optimize
power consumption of workloads or their system in general.
Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Zhang Rui <rui.zhang@intel.com>
CC: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
