summaryrefslogtreecommitdiff
path: root/tools/perf
AgeCommit message (Collapse)AuthorFilesLines
2018-04-24perf evsel: Only fall back group read for leaderKan Liang1-1/+2
Perf doesn't support mixed events from different PMUs (except software event) in a group. The perf stat should output <not counted>/<not supported> for all events, but it doesn't. For example, perf stat -e '{cycles,uncore_imc_5/umask=0xF,event=0x4/,instructions}' <not counted> cycles <not supported> uncore_imc_5/umask=0xF,event=0x4/ 1,024,300 instructions If perf fails to open an event, it doesn't error out directly. It will disable some features and retry, until the event is opened or all features are disabled. The disabled features will not be re-enabled. The group read is one of these features. For the example as above, the IMC event and the leader event "cycles" are from different PMUs. Opening the IMC event must fail. The group read feature must be disabled for IMC event and the followed event "instructions". The "instructions" event has the same PMU as the leader "cycles". It can be opened successfully. Since the group read feature has been disabled, the "instructions" event will be read as a single event, which definitely has a value. The group read fallback is still useful for the case which kernel doesn't support group read. It is good enough to be handled only by the leader. For the fallback request from members, it must be caused by an error. The fallback only breaks the semantics of group. Limit the group read fallback only for the leader. Committer testing: On a broadwell t450s notebook: Before: # perf stat -e '{cycles,unc_cbo_cache_lookup.read_i,instructions}' sleep 1 Performance counter stats for 'sleep 1': <not counted> cycles <not supported> unc_cbo_cache_lookup.read_i 818,206 instructions 1.003170887 seconds time elapsed Some events weren't counted. Try disabling the NMI watchdog: echo 0 > /proc/sys/kernel/nmi_watchdog perf stat ... echo 1 > /proc/sys/kernel/nmi_watchdog After: # perf stat -e '{cycles,unc_cbo_cache_lookup.read_i,instructions}' sleep 1 Performance counter stats for 'sleep 1': <not counted> cycles <not supported> unc_cbo_cache_lookup.read_i <not counted> instructions 1.001380511 seconds time elapsed Some events weren't counted. Try disabling the NMI watchdog: echo 0 > /proc/sys/kernel/nmi_watchdog perf stat ... echo 1 > /proc/sys/kernel/nmi_watchdog # Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Agustin Vega-Frias <agustinv@codeaurora.org> Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Fixes: 82bf311e15d2 ("perf stat: Use group read for event groups") Link: http://lkml.kernel.org/r/1524594014-79243-3-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-24perf stat: Print out hint for mixed PMU group errorKan Liang1-1/+34
Perf doesn't support mixed events from different PMUs (except software event) in a group. For this case, only "<not counted>" or "<not supported>" are printed out. There is no hint which guides users to fix the issue. Checking the PMU type of events to determine if they are from the same PMU. There may be false alarm for the checking. E.g. the core PMU has different PMU type. But it should not happen often. The false alarm can also be tolerated, because: - It only happens on error path. - It just provides a possible solution for the issue. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Agustin Vega-Frias <agustinv@codeaurora.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/1524594014-79243-2-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-24perf pmu: Fix core PMU alias list for X86 platformKan Liang1-13/+7
When counting uncore event with alias, core event is mistakenly involved, for example: perf stat --no-merge -e "unc_m_cas_count.all" -C0 sleep 1 Performance counter stats for 'CPU(s) 0': 0 unc_m_cas_count.all [uncore_imc_4] 0 unc_m_cas_count.all [uncore_imc_2] 0 unc_m_cas_count.all [uncore_imc_0] 153,640 unc_m_cas_count.all [cpu] 0 unc_m_cas_count.all [uncore_imc_5] 25,026 unc_m_cas_count.all [uncore_imc_3] 0 unc_m_cas_count.all [uncore_imc_1] 1.001447890 seconds time elapsed The reason is that current implementation doesn't check PMU name of a event when adding its alias into the alias list for core PMU. The uncore event aliases are mistakenly added. This bug was introduced in: commit 14b22ae028de ("perf pmu: Add helper function is_pmu_core to detect PMU CORE devices") Checking the PMU name for all PMUs on X86 and other architectures except ARM. There is no behavior change for ARM. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Agustin Vega-Frias <agustinv@codeaurora.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Fixes: 14b22ae028de ("perf pmu: Add helper function is_pmu_core to detect PMU CORE devices") Link: http://lkml.kernel.org/r/1524594014-79243-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23perf record: Fix s390 undefined record__auxtrace_init() return valueThomas Richter1-0/+1
Command 'perf record' calls: cmd_report() record__auxtrace_init() auxtrace_record__init() On s390 function auxtrace_record__init() returns random return value due to missing initialization. This sometime causes 'perf record' to exit immediately without error message and creating a perf.data file. Fix this by setting error the return code to zero before returning from platform specific functions which may not set the error code in call cases. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180423142940.21143-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23perf mem: Document incorrect and missing optionsSangwon Hong1-12/+29
Several options were incorrectly described, some lacked describing required arguments while others were simply not documented, fix it. Signed-off-by: Sangwon Hong <qpakzk@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/1524382146-19609-1-git-send-email-qpakzk@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23perf evsel: Disable write_backward for leader sampling group eventsJiri Olsa2-2/+8
.. and other related fields that do not need to be enabled for events that have sampling leader. It fixes the perf top usage Ingo reported broken: # perf top -e '{cycles,msr/aperf/}:S' The 'msr/aperf/' event is configured for write_back sampling, which is not allowed by the MSR PMU, so it fails to create the event. Adjusting related attr test. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180423090823.32309-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23perf pmu: Fix pmu events parsing ruleJiri Olsa1-4/+4
Currently all the event parsing fails end up in the event_pmu rule, and display misleading help like: $ perf stat -e inst kill event syntax error: 'inst' \___ Cannot find PMU `inst'. Missing kernel support? ... The reason is that the event_pmu is too strong and match also single string. Changing it to force the '/' separators to be part of the rule, and getting the proper error now: $ perf stat -e inst kill event syntax error: 'inst' \___ parser error Run 'perf list' for a list of valid events ... Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reported-by: Ingo Molnar <mingo@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180423090823.32309-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23perf stat: Keep the / modifier separator in fallbackJiri Olsa1-1/+7
The 'perf stat' fallback for EACCES error sets the exclude_kernel perf_event_attr and tries perf_event_open() again with it. In addition, it also changes the name of the event to reflect that change by adding the 'u' modifier. But it does not take into account the '/' separator, so the event name can end up mangled, like: (note the '/:' characters) $ perf stat -e cpu/cpu-cycles/ kill ... 386,832 cpu/cpu-cycles/:u Adding the code to check on the '/' separator and set the following correct event name: $ perf stat -e cpu/cpu-cycles/ kill ... 388,548 cpu/cpu-cycles/u Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180423090823.32309-4-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23perf test: Adapt test case record+probe_libc_inet_pton.sh for s390Thomas Richter1-4/+2
perf test case 58 (record+probe_libc_inet_pton.sh) executed on s390x using kernel 4.16.0rc3 displays this result: # perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 probe_libc:inet_pton: (3ffa0240448) __GI___inet_pton (/usr/lib64/libc-2.26.so) gaih_inet (inlined) __GI_getaddrinfo (inlined) main (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) _start (/usr/bin/ping) After I installed kernel 4.16.0 the same tests uses commands: # perf record -e probe_libc:inet_pton/call-graph=dwarf/ -o /tmp/perf.data.abc ping -6 -c 1 ::1 # perf script -i /tmp/perf.data.abc and displays: ping 39048 [006] 84230.381198: probe_libc:inet_pton: (3ffa0240448) 140448 __GI___inet_pton (/usr/lib64/libc-2.26.so) fbde1 gaih_inet (inlined) fe2b9 __GI_getaddrinfo (inlined) 398d main (/usr/bin/ping) Nothing else changed including glibc elfutils and other libraries picked up by the build. The entries for __libc_start_main and _start are missing. I bisected missing __libc_start_main and _start to commit Fixes: 3d20c6246690 ("perf unwind: Unwind with libdw doesn't take symfs into account") When I undo this commit I get this call stack on s390: [root@s35lp76 perf]# ./perf script -i /tmp/perf.data.abc ping 39048 [006] 84230.381198: probe_libc:inet_pton: (3ffa0240448) 140448 __GI___inet_pton (/usr/lib64/libc-2.26.so) fbde1 gaih_inet (inlined) fe2b9 __GI_getaddrinfo (inlined) 398d main (/usr/bin/ping) 22fbd __libc_start_main (/usr/lib64/libc-2.26.so) 457b _start (/usr/bin/ping) Looks like dwarf functions dwfl_xxx create different call back stack trace when using file /usr/lib/debug/usr/bin/ping-20161105-7.fc27.s390x.debug instead of file /usr/bin/ping. Fix this test case on s390 and do not expect any call back stack entry after the main() function. Also be more robust and accept a leading __GI_ prefix in front of getaddrinfo. On x86 this test case shows the same call stack using both kernel versions 4.16.0rc3 and 4.16.0 and also stops at main: [root@f27 perf]# ./perf script -i /tmp/perf.data.tmr ping 4446 [000] 172.027088: probe_libc:inet_pton: (7fdfa08c93c0) 1393c0 __GI___inet_pton (/usr/lib64/libc-2.26.so) fe60d getaddrinfo (/usr/lib64/libc-2.26.so) 2f40 main (/usr/bin/ping) [root@f27 perf]# Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Martin Vuille <jpmv27@aim.com> Link: http://lkml.kernel.org/r/20180423082428.7930-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23perf list: Remove s390 specific strcmp_cpuid_cmp functionThomas Richter3-24/+6
Make the type field in pmu-events/arch/s390/mapfile.cvs more generic to match the created cpuid string for s390. The pattern also checks for the counter first version number and counter second version number ([13]\.[1-5]) and the authorization field which follows. These numbers do not exist in the cpuid identification string when perf commands are executed on a z/VM environment (which does not support CPU counter measurement facility). CPUID string for LPAR: cpuid : IBM,3906,704,M03,3.5,002f CPUID string for z/VM: cpuid : IBM,2964,702,N96 This allows the removal of s390 specific cpuid compare code and uses the common compare function with its regular expression matching algorithm. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180423081745.3672-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23perf machine: Set main kernel end address properlyNamhyung Kim1-12/+18
map_groups__fixup_end() was called to set the end addresses of kernel and module maps. But now since machine__create_modules() sets the end address of modules properly, the only remaining piece is the kernel map. We can set it with adjacent module's address directly instead of calling map_groups__fixup_end(). If there's no module after the kernel map, the end address will be ~0ULL. Since it also changes the start address of the kernel map, it needs to re-insert the map to the kmaps in order to keep a correct ordering. Kim reported that it caused problems on ARM64. Reported-by: Kim Phillips <kim.phillips@arm.com> Tested-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20180419235915.GA19067@sejong Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-19coresight: Move to SPDX identifierMathieu Poirier7-64/+7
Move CoreSight headers to the SPDX identifier. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1524089118-27595-1-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18perf test BPF: Fixup BPF test using epoll_pwait syscall function probeArnaldo Carvalho de Melo1-1/+1
Since e145242ea0df ("syscalls/core, syscalls/x86: Clean up syscall stub naming convention") changed the main syscall function for 'epoll_pwait' to something other than the expected 'SyS_epoll_pwait the' 'perf test BPF' entries started failing, fix it by using something called from the main syscall function instead, 'epoll_wait', which should keep this test working in older kernels too. Before: # perf test BPF 40: BPF filter : 40.1: Basic BPF filtering : FAILED! 40.2: BPF pinning : Skip 40.3: BPF prologue generation : Skip 40.4: BPF relocation checker : Skip If we use -v for that test we see the problem: Probe point 'SyS_epoll_pwait' not found. After: # perf test BPF 40: BPF filter : 40.1: Basic BPF filtering : Ok 40.2: BPF pinning : Ok 40.3: BPF prologue generation : Ok 40.4: BPF relocation checker : Ok # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/r/tip-y24nmn70cs2am8jh4i344dng@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18perf tests mmap: Show which tracepoint is failingArnaldo Carvalho de Melo1-1/+1
In the 'perf test "mmap interface"' we try creating events for several tracepoints, but when perf_evsel__new() fails we're not showing which one is failing, fix that to help diagnosing problems, such as the syscall tracepoints ones being found and fixes in this merge window. Now the failing tests shows: # perf test -v "mmap interface" 4: Read samples using the mmap interface : --- start --- test child forked, pid 14311 <SNIP> perf_evsel__new(sys_enter_getppid) test child finished with -1 ---- end ---- Read samples using the mmap interface: FAILED! # Now to check why the syscalls:sys_enter_getppid is failing... # ls -la /sys/kernel/debug/tracing/events/syscalls/sys_enter_getppid ls: cannot access '/sys/kernel/debug/tracing/events/syscalls/sys_enter_getppid': No such file or directory # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-44xk0ycdzrfzx1o9rklf5itl@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18perf record: Remove suggestion to enable APICAndi Kleen1-2/+1
'perf record' suggests to enable the APIC on errors. APIC is practically always used today and the problem is usually somewhere else. Just remove the outdated suggestion. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20180406203812.3087-5-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18perf record: Remove misleading error suggestionAndi Kleen1-2/+1
When perf record encounters an error setting up an event it suggests to enable CONFIG_PERF_EVENTS. This is misleading because: - Usually it is enabled (it is really hard to disable on x86) - The problem is usually somewhere else, e.g. the CPU is not supported or an invalid configuration has been used. Remove the misleading suggestion. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20180406203812.3087-4-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18perf hists browser: Clarify top/report browser helpAndi Kleen1-1/+1
Clarify in the browser help that ESC in tui mode may go back to the previous screen instead of just exiting (was not clear to me) Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20180406203812.3087-3-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18perf mem: Allow all record/report optionsAndi Kleen2-2/+5
For perf mem report / perf mem record, pass all unknown options through to the underlying report/record commands. This makes things like perf mem record -a sleep 1 work. Matches how c2c and other tools work. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20180406203812.3087-2-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18perf trace: Support MAP_FIXED_NOREPLACEArnaldo Carvalho de Melo1-0/+3
Introduced in a4ff8e8620d3 ("mm: introduce MAP_FIXED_NOREPLACE"), and now that we have that define in the just syncronized tools/arch/*/include/uapi/asm/mman.h files, add support for it. This should really transition to autogeneration of string tables as done for various other things: $ ls /tmp/build/perf/trace/beauty/generated/*.c arch_errno_name_array.c kcmp_type_array.c madvise_behavior_array.c pkey_alloc_access_rights_array.c prctl_option_array.c $ head /tmp/build/perf/trace/beauty/generated/madvise_behavior_array.c static const char *madvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [8] = "FREE", [9] = "REMOVE", [10] = "DONTFORK", [11] = "DOFORK", $ Till then, add support for this the old way. Also it has to be ifdef'ed, because arches like mips still don't define it. The proper solution will be to have per-arch tables for these values to support cross-analysis. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-td9t5vhjltqnlzaurkkgq8cn@git.kernel.org Signef-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-17perf list: Add s390 support for detailed/verbose PMU event descriptionThomas Richter1-0/+6
'perf list' with flags -d and -v print a description (-d) or a very verbose explanation (-v) of CPU specific counter events. These descriptions are provided with the json files in directory pmu-events/arch/s390/*.json. Display of these descriptions on s390 requires the corresponding json files. On s390 this does not work because function is_pmu_core() does not detect the s390 directory name where the CPU specific events are listed. On x86 it is: /sys/bus/event_source/devices/cpu whereas on s390 it is: /sys/bus/event_source/devices/cpum_cf /sys/bus/event_source/devices/cpum_sf Fix this by adding s390 directory name testing to function is_pmu_core(). This is the same approach as taken for the ARM platform. Output before: [root@s35lp76 perf]# ./perf list -d pmu List of pre-defined events (to be used in -e): cpum_cf/AES_BLOCKED_CYCLES/ [Kernel PMU event] cpum_cf/AES_BLOCKED_FUNCTIONS/ [Kernel PMU event] cpum_cf/AES_CYCLES/ [Kernel PMU event] cpum_cf/AES_FUNCTIONS/ [Kernel PMU event] .... cpum_cf/TX_NC_TEND/ [Kernel PMU event] cpum_cf/VX_BCD_EXECUTION_SLOTS/ [Kernel PMU event] cpum_sf/SF_CYCLES_BASIC/ [Kernel PMU event] Output after: [root@s35lp76 perf]# ./perf list -d pmu List of pre-defined events (to be used in -e): cpum_cf/AES_BLOCKED_CYCLES/ [Kernel PMU event] cpum_cf/AES_BLOCKED_FUNCTIONS/ [Kernel PMU event] cpum_cf/AES_CYCLES/ [Kernel PMU event] cpum_cf/AES_FUNCTIONS/ [Kernel PMU event] .... cpum_cf/TX_NC_TEND/ [Kernel PMU event] cpum_cf/VX_BCD_EXECUTION_SLOTS/ [Kernel PMU event] cpum_sf/SF_CYCLES_BASIC/ [Kernel PMU event] 3906: bcd_dfp_execution_slots [BCD DFP Execution Slots] decimal_instructions [Decimal Instructions] dtlb2_gpage_writes [DTLB2 GPAGE Writes] dtlb2_hpage_writes [DTLB2 HPAGE Writes] dtlb2_misses [DTLB2 Misses] dtlb2_writes [DTLB2 Writes] itlb2_misses [ITLB2 Misses] itlb2_writes [ITLB2 Writes] l1c_tlb2_misses [L1C TLB2 Misses] ..... cfvn 3: cpu_cycles [CPU Cycles] instructions [Instructions] l1d_dir_writes [L1D Directory Writes] l1d_penalty_cycles [L1D Penalty Cycles] l1i_dir_writes [L1I Directory Writes] l1i_penalty_cycles [L1I Penalty Cycles] problem_state_cpu_cycles [Problem State CPU Cycles] problem_state_instructions [Problem State Instructions] .... csvn generic: aes_blocked_cycles [AES Blocked Cycles] aes_blocked_functions [AES Blocked Functions] aes_cycles [AES Cycles] aes_functions [AES Functions] dea_blocked_cycles [DEA Blocked Cycles] dea_blocked_functions [DEA Blocked Functions] .... Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180416132314.33249-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-17perf script: Extend misc field decoding with switch out event typeAlexey Budankov2-9/+13
Append 'p' sign to 'S' tag designating the type of context switch out event so 'Sp' means preemption context switch. Documentation is extended to cover new presentation changes. $ perf script --show-switch-events -F +misc -I -i perf.data: hdparm 4073 [004] U 762.198265: 380194 cycles:ppp: 7faf727f5a23 strchr (/usr/lib64/ld-2.26.so) hdparm 4073 [004] K 762.198366: 441572 cycles:ppp: ffffffffb9218435 alloc_set_pte (/lib/modules/4.16.0-rc6+/build/vmlinux) hdparm 4073 [004] S 762.198391: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [004] 762.198392: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 4073/4073 swapper 0 [004] Sp 762.198477: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 4073/4073 hdparm 4073 [004] 762.198478: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 swapper 0 [007] K 762.198514: 2303073 cycles:ppp: ffffffffb98b0c66 intel_idle (/lib/modules/4.16.0-rc6+/build/vmlinux) swapper 0 [007] Sp 762.198561: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 1134/1134 kworker/u16:18 1134 [007] 762.198562: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 kworker/u16:18 1134 [007] S 762.198567: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5fc65ce7-8ca5-53ae-8858-8ddd27290575@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-17perf report: Extend raw dump (-D) out with switch out event typeAlexey Budankov1-1/+3
Print additional 'preempt' tag for PERF_RECORD_SWITCH[_CPU_WIDE] OUT records when event header misc field contains PERF_RECORD_MISC_SWITCH_OUT_PREEMPT bit set designating preemption context switch out event: tools/perf/perf report -D -i perf.data | grep _SWITCH 0 768361415226 0x27f076 [0x28]: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 8/8 4 768362216813 0x28f45e [0x28]: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 4 768362217824 0x28f486 [0x28]: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 4073/4073 0 768362414027 0x27f0ce [0x28]: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 8/8 0 768362414367 0x27f0f6 [0x28]: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/6f5aebb9-b96c-f304-f08f-8f046d38de4f@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-17tools/headers: Synchronize kernel ABI headers, v4.17-rc1Ingo Molnar2-355/+359
Sync the following tooling headers with the latest kernel version: tools/arch/arm/include/uapi/asm/kvm.h - New ABI: KVM_REG_ARM_* tools/arch/x86/include/asm/required-features.h - Removal of NEED_LA57 dependency tools/arch/x86/include/uapi/asm/kvm.h - New KVM ABI: KVM_SYNC_X86_* tools/include/uapi/asm-generic/mman-common.h - New ABI: MAP_FIXED_NOREPLACE flag tools/include/uapi/linux/bpf.h - New ABI: BPF_F_SEQ_NUMBER functions tools/include/uapi/linux/if_link.h - New ABI: IFLA tun and rmnet support tools/include/uapi/linux/kvm.h - New ABI: hyperv eventfd and CONN_ID_MASK support plus header cleanups tools/include/uapi/sound/asound.h - New ABI: SNDRV_PCM_FORMAT_FIRST PCM format specifier tools/perf/arch/x86/entry/syscalls/syscall_64.tbl - The x86 system call table description changed due to the ptregs changes and the renames, in: d5a00528b58c: syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*() 5ac9efa3c50d: syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention ebeb8c82ffaf: syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32 Also fix the x86 syscall table warning: -Warning: Kernel ABI header at 'tools/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' +Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' None of these changes impact existing tooling code, so we only have to copy the kernel version. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brian Robbins <brianrob@microsoft.com> Cc: Clark Williams <williams@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: Dmitriy Vyukov <dvyukov@google.com> <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Sandipan Das <sandipan@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Takuya Yamamoto <tkydevel@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: William Cohen <wcohen@redhat.com> Cc: Yonghong Song <yhs@fb.com> Link: http://lkml.kernel.org/r/20180416064024.ofjtrz5yuu3ykhvl@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-13perf annotate: Handle variables in 'sub', 'or' and many other instructionsArnaldo Carvalho de Melo1-1/+66
Just like is done for 'mov' and others that can have as source or targets variables resolved by objdump, to make them more compact: - orb $0x4,0x224d71(%rip) # 226ca4 <_rtld_global+0xca4> + orb $0x4,_rtld_global+0xca4 Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-efex7746id4w4wa03nqxvh3m@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-13perf annotate: Allow setting the offset level in .perfconfigArnaldo Carvalho de Melo2-3/+17
The default is 1 (jump_target): # perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave Samples: 3K of event 'cycles:ppp', 3000 Hz, Event count (approx.): 2766398574 _raw_spin_lock_irqsave() /proc/kcore 0.26 nop 4.61 push %rbx 19.33 pushfq 7.97 pop %rax 0.32 nop 0.06 mov %rax,%rbx 14.63 cli 0.06 nop xor %eax,%eax mov $0x1,%edx 49.94 lock cmpxchg %edx,(%rdi) 0.16 test %eax,%eax ↓ jne 2b 2.66 mov %rbx,%rax pop %rbx ← retq 2b: mov %eax,%esi → callq *ffffffffb30eaed0 mov %rbx,%rax pop %rbx ← retq # But one can ask for showing offsets for call instructions by setting this: # perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave Samples: 3K of event 'cycles:ppp', 3000 Hz, Event count (approx.): 2766398574 _raw_spin_lock_irqsave() /proc/kcore 0.26 nop 4.61 push %rbx 19.33 pushfq 7.97 pop %rax 0.32 nop 0.06 mov %rax,%rbx 14.63 cli 0.06 nop xor %eax,%eax mov $0x1,%edx 49.94 lock cmpxchg %edx,(%rdi) 0.16 test %eax,%eax ↓ jne 2b 2.66 mov %rbx,%rax pop %rbx ← retq 2b: mov %eax,%esi 2d: → callq *ffffffffb30eaed0 mov %rbx,%rax pop %rbx ← retq # Or using a big value to ask for all offsets to be shown: # cat ~/.perfconfig [annotate] offset_level = 100 hide_src_code = true # perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave Samples: 3K of event 'cycles:ppp', 3000 Hz, Event count (approx.): 2766398574 _raw_spin_lock_irqsave() /proc/kcore 0.26 0: nop 4.61 5: push %rbx 19.33 6: pushfq 7.97 7: pop %rax 0.32 8: nop 0.06 d: mov %rax,%rbx 14.63 10: cli 0.06 11: nop 17: xor %eax,%eax 19: mov $0x1,%edx 49.94 1e: lock cmpxchg %edx,(%rdi) 0.16 22: test %eax,%eax 24: ↓ jne 2b 2.66 26: mov %rbx,%rax 29: pop %rbx 2a: ← retq 2b: mov %eax,%esi 2d: → callq *ffffffffb30eaed0 32: mov %rbx,%rax 35: pop %rbx 36: ← retq # This also affects the TUI, i.e. the default 'perf annotate' and 'perf top/report' -> A hotkey -> annotate interfaces, when slang-devel is present in the build, i.e.: # perf version --build-options | grep slang libslang: [ on ] # HAVE_SLANG_SUPPORT # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-venm6x5zrt40eu8hxdsmqxz6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-13perf report: Fix switching to another perf.data fileArnaldo Carvalho de Melo1-5/+3
In the TUI the 's' hotkey can be used to switch to another perf.data file in the current directory, but that got broken in Fixes: b01141f4f59c ("perf annotate: Initialize the priv are in symbol__new()"), that would show this once another file was chosen: ┌─Fatal Error─────────────────────────────────────┐ │Annotation needs to be init before symbol__init()│ │ │ │ │ │Press any key... │ └─────────────────────────────────────────────────┘ Fix it by just silently bailing out if symbol__annotation_init() was already called, just like is done with symbol__init(), i.e. they are done just once at session start, not when switching to a new perf.data file. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: b01141f4f59c ("perf annotate: Initialize the priv are in symbol__new()") Link: https://lkml.kernel.org/n/tip-ogppdtpzfax7y1h6gjdv5s6u@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-13perf record: Change warning for missing sysfs entry to debugThomas Richter1-1/+2
Using perf on 4.16.0 kernel on s390 shows this warning: failed: can't open node sysfs data each time I run command perf record ... for example: [root@s35lp76 perf]# ./perf record -e rB0000 -- sleep 1 [ perf record: Woken up 1 times to write data ] failed: can't open node sysfs data [ perf record: Captured and wrote 0.001 MB perf.data (4 samples) ] [root@s35lp76 perf]# It turns out commit e2091cedd51bf ("perf tools: Add MEM_TOPOLOGY feature to perf data file") tries to open directory named /sys/devices/system/node/ which does not exist on s390. This is the call stack: __cmd_record +---> perf_session__write_header +---> perf_header__adds_write +---> do_write_feat +---> write_mem_topology +---> build_mem_topology prints warning The issue starts in do_write_feat() which unconditionally loops over all features and now includes HEADER_MEM_TOPOLOGY and calls write_mem_topology(). Function record__init_features() at the beginning of __cmd_record() sets all features and then turns off some of them. Fix this by changing the warning to a level 2 debug output statement. So it is only shown when debug level 2 or higher is set. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180412133246.92801-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-12perf tests: Disable breakpoint accounting test for powerpcSandipan Das1-0/+1
We disable this test as instruction breakpoints (HW_BREAKPOINT_X) are not available for powerpc. Before applying patch: 21: Breakpoint accounting : --- start --- test child forked, pid 3635 failed opening event 0 failed opening event 0 watchpoints count 1, breakpoints count 0, has_ioctl 1, share 0 test child finished with -2 ---- end ---- Breakpoint accounting: Skip After applying patch: 21: Breakpoint accounting : Disabled Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20180412162140.2992-1-sandipan@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-12perf sched: Fix documentation for timehistTakuya Yamamoto1-2/+2
Fixed a incorrect option and usage to those shown by "perf sched timehist -h", i.e. the default is really --call-graph, which is equivalent to -g. Signed-off-by: Takuya Yamamoto <tkydevel@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/n/tip-8fzo0dlsi1mku5aqx8brep5s@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-12perf version: Print status for syscall_tableJin Yao1-0/+3
This patch doesn't print "libaudit" line if HAVE_SYSCALL_TABLE_SUPPORT is available and add a line for HAVE_SYSCALL_TABLE_SUPPORT. For example, $ ./perf -vv perf version 4.13.rc5.gc2f8af9 dwarf: [ on ] # HAVE_DWARF_SUPPORT dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT glibc: [ on ] # HAVE_GLIBC_SUPPORT gtk2: [ on ] # HAVE_GTK2_SUPPORT syscall_table: [ on ] # HAVE_SYSCALL_TABLE_SUPPORT libbfd: [ on ] # HAVE_LIBBFD_SUPPORT libelf: [ on ] # HAVE_LIBELF_SUPPORT libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT libperl: [ on ] # HAVE_LIBPERL_SUPPORT libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT libslang: [ on ] # HAVE_SLANG_SUPPORT libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT zlib: [ on ] # HAVE_ZLIB_SUPPORT lzma: [ on ] # HAVE_LZMA_SUPPORT get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT bpf: [ on ] # HAVE_LIBBPF_SUPPORT The line "syscall_table: [ on ] # HAVE_SYSCALL_TABLE_SUPPORT" is new created. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1523269609-28824-4-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-12perf tools: Rename HAVE_SYSCALL_TABLE to HAVE_SYSCALL_TABLE_SUPPORTJin Yao5-8/+8
To be consistent with other HAVE_XXX_SUPPORT uses in Makefile.config, this patch renames HAVE_SYSCALL_TABLE to HAVE_SYSCALL_TABLE_SUPPORT and updates the C code accordingly. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1523269609-28824-3-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-12perf script: Use HAVE_LIBXXX_SUPPORT to replace NO_LIBXXXJin Yao2-4/+4
In Makefile.config, we define the conditional compilation variables HAVE_LIBPERL_SUPPORT and HAVE_LIBPYTHON_SUPPORT. To make the C code more consistent, this patch replaces NO_LIBPERL/NO_LIBPYTHON in C code with HAVE_LIBPERL_SUPPORT/ HAVE_LIBPYTHON_SUPPORT. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Suggested-by: Ingo Molnar <mingo@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1523269609-28824-2-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-12perf tests bpf: Remove unused ptrace.h include from LLVM testArnaldo Carvalho de Melo1-1/+0
The bpf-script-test-kbuild.c script, used in one of the LLVM subtests, includes ptrace.h unnecessarily, and that ends up making it include a header that uses asm(_ASM_SP), a feature that is not supported by clang <= 4.0, breaking that 'perf test' entry. This ended up leading to the ca26cffa4e4a ("x86/asm: Allow again using asm.h when building for the 'bpf' clang target"), adding an ifndef __BPF__ to the arch/x86/include/asm/asm.h file. Newer clang versions accept that asm(_ASM_SP) construct, so just remove the ptrace.h include, which paves the way for reverting ca26cffa4e4a ("x86/asm: Allow again using asm.h when building for the 'bpf' clang target"). Suggested-by: Yonghong Song <yhs@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lkml.kernel.org/r/613f0a0d-c433-8f4d-dcc1-c9889deae39e@fb.com Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-clbcnzbakdp18ibme4wt43ib@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-12perf jvmti: Give hints about package names needed to buildArnaldo Carvalho de Melo1-1/+1
Give as examples of package names to install to have this built for fedora and debian, to help the user a bit. The part from 'e.g.:' onwards: No openjdk development package found, please install JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: William Cohen <wcohen@redhat.com> Link: https://lkml.kernel.org/n/tip-edbi4r2pvzn7no6ebxbtczng@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-12perf annotate browser: Allow showing offsets in more than just jump targetsArnaldo Carvalho de Melo1-0/+5
Jesper wanted to see offsets at callq sites when doing some performance investigation related to retpolines, so save him some time by providing a 'O' hotkey to allow showing offsets from function start at call instructions or in all instructions, just go on pressing 'O' till the offsets you need appear. Example: Starts with: Samples: 64 of event 'cycles:ppp', 100000 Hz, Event count (approx.): 318963 ixgbe_read_reg /proc/kcore Percent│ ↑ je 2a │ ┌──cmp $0xffffffff,%r13d │ ├──je d0 │ │ mov $0x53e3,%edi │ │→ callq __const_udelay │ │ sub $0x1,%r15d │ │↑ jne 83 │ │ mov 0x8(%rbp),%rax │ │ testb $0x20,0x1799(%rax) │ │↑ je 2a │ │ mov 0x200(%rax),%rdi │ │ mov %r13d,%edx │ │ mov $0xffffffffc02595d8,%rsi │ │→ callq netdev_warn │ │↑ jmpq 2a │d0:└─→mov 0x8(%rbp),%rsi │ mov %rbp,%rdi │ mov %eax,0x4(%rsp) │ → callq ixgbe_remove_adapter.isra.77 │ mov 0x4(%rsp),%eax Press 'h' for help on key bindings ============================================================================ Pess 'O': Samples: 64 of event 'cycles:ppp', 100000 Hz, Event count (approx.): 318963 ixgbe_read_reg /proc/kcore Percent│ ↑ je 2a │ ┌──cmp $0xffffffff,%r13d │ ├──je d0 │ │ mov $0x53e3,%edi │99:│→ callq __const_udelay │ │ sub $0x1,%r15d │ │↑ jne 83 │ │ mov 0x8(%rbp),%rax │ │ testb $0x20,0x1799(%rax) │ │↑ je 2a │ │ mov 0x200(%rax),%rdi │ │ mov %r13d,%edx │ │ mov $0xffffffffc02595d8,%rsi │c6:│→ callq netdev_warn │ │↑ jmpq 2a │d0:└─→mov 0x8(%rbp),%rsi │ mov %rbp,%rdi │ mov %eax,0x4(%rsp) │db: → callq ixgbe_remove_adapter.isra.77 │ mov 0x4(%rsp),%eax Press 'h' for help on key bindings ============================================================================ Press 'O' again: Samples: 64 of event 'cycles:ppp', 100000 Hz, Event count (approx.): 318963 ixgbe_read_reg /proc/kcore Percent│8c: ↑ je 2a │8e:┌──cmp $0xffffffff,%r13d │92:├──je d0 │94:│ mov $0x53e3,%edi │99:│→ callq __const_udelay │9e:│ sub $0x1,%r15d │a2:│↑ jne 83 │a4:│ mov 0x8(%rbp),%rax │a8:│ testb $0x20,0x1799(%rax) │af:│↑ je 2a │b5:│ mov 0x200(%rax),%rdi │bc:│ mov %r13d,%edx │bf:│ mov $0xffffffffc02595d8,%rsi │c6:│→ callq netdev_warn │cb:│↑ jmpq 2a │d0:└─→mov 0x8(%rbp),%rsi │d4: mov %rbp,%rdi │d7: mov %eax,0x4(%rsp) │db: → callq ixgbe_remove_adapter.isra.77 │e0: mov 0x4(%rsp),%eax Press 'h' for help on key bindings ============================================================================ Press 'O' again and it will show just jump target offsets. Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-upp6pfdetwlsx18ec2uf1od4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-12perf annotate: Allow showing offsets in more than just jump targetsArnaldo Carvalho de Melo2-2/+18
Jesper wanted to see offsets at callq sites when doing some performance investigation related to retpolines, so save him some time by providing an 'struct annotation_options' to control where offsets should appear: just on jump targets? That + call instructions? All? This puts in place the logic to show the offsets, now we need to wire this up in the TUI browser (next patch) and on the 'perf annotate --stdio2" interface, where we need a more general mechanism to setup the 'annotation_options' struct from the command line. Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-m3jc9c3swobye9tj08gnh5i7@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-12perf tests: Run dwarf unwind test on arm32Kim Phillips3-0/+30
Enable the unwind test on arm32: $ perf test unwind 58: DWARF unwind : Ok Signed-off-by: Kim Phillips <kim.phillips@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Brian Robbins <brianrob@microsoft.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180410191624.a3a468670dd4548c66d3d094@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-12perf stat: Enable 1ms interval for printing event counters valuesAlexey Budankov2-13/+3
Currently print count interval for performance counters values is limited by 10ms so reading the values at frequencies higher than 100Hz is restricted by the tool. This change makes perf stat -I possible on frequencies up to 1KHz and, to some extent, makes perf stat -I to be on-par with perf record sampling profiling. When running perf stat -I for monitoring e.g. PCIe uncore counters and at the same time profiling some I/O workload by perf record e.g. for cpu-cycles and context switches, it is then possible to observe consolidated CPU/OS/IO(Uncore) performance picture for that workload. Tool overhead warning printed when specifying -v option can be missed due to screen scrolling in case you have output to the console so message is moved into help available by running perf stat -h. Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/b842ad6a-d606-32e4-afe5-974071b5198e@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-09perf tests clang: Fix function name for clang IR testSandipan Das1-1/+1
As stated in tests/llvm-src-base.c, the name of the bpf function should be "bpf_func__SyS_epoll_pwait" but this clang test fails as it tries to lookup "bpf_func__SyS_epoll_wait". Before applying patch: 55: builtin clang support : 55.1: builtin clang compile C source to IR : FAILED! 55.2: builtin clang compile C source to ELF object : Skip After applying patch: 55: builtin clang support : 55.1: builtin clang compile C source to IR : Ok 55.2: builtin clang compile C source to ELF object : Ok Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Fixes: e67d52d411c3 ("perf clang: Update test case to use real BPF script") Link: http://lkml.kernel.org/r/20180404180419.19056-3-sandipan@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-09perf clang: Add support for recent clang versionsSandipan Das1-1/+10
The clang API calls used by perf have changed in recent releases and builds succeed with libclang-3.9 only. This introduces compatibility with libclang-4.0 and above. Without this patch, we will see the following compilation errors with libclang-4.0+: util/c++/clang.cpp: In function ‘clang::CompilerInvocation* perf::createCompilerInvocation(llvm::opt::ArgStringList, llvm::StringRef&, clang::DiagnosticsEngine&)’: util/c++/clang.cpp:62:33: error: ‘IK_C’ was not declared in this scope Opts.Inputs.emplace_back(Path, IK_C); ^~~~ util/c++/clang.cpp: In function ‘std::unique_ptr<llvm::Module> perf::getModuleFromSource(llvm::opt::ArgStringList, llvm::StringRef, llvm::IntrusiveRefCntPtr<clang::vfs::FileSystem>)’: util/c++/clang.cpp:75:26: error: no matching function for call to ‘clang::CompilerInstance::setInvocation(clang::CompilerInvocation*)’ Clang.setInvocation(&*CI); ^ In file included from util/c++/clang.cpp:14:0: /usr/include/clang/Frontend/CompilerInstance.h:231:8: note: candidate: void clang::CompilerInstance::setInvocation(std::shared_ptr<clang::CompilerInvocation>) void setInvocation(std::shared_ptr<CompilerInvocation> Value); ^~~~~~~~~~~~~ Committer testing: Tested on Fedora 27 after installing the clang-devel and llvm-devel packages, versions: # rpm -qa | egrep llvm\|clang llvm-5.0.1-6.fc27.x86_64 clang-libs-5.0.1-5.fc27.x86_64 clang-5.0.1-5.fc27.x86_64 clang-tools-extra-5.0.1-5.fc27.x86_64 llvm-libs-5.0.1-6.fc27.x86_64 llvm-devel-5.0.1-6.fc27.x86_64 clang-devel-5.0.1-5.fc27.x86_64 # Make sure you don't have some older version lying around in /usr/local, etc, then: $ make LIBCLANGLLVM=1 -C tools/perf install-bin And in the end perf will be linked agains these libraries: # ldd ~/bin/perf | egrep -i llvm\|clang libclangAST.so.5 => /lib64/libclangAST.so.5 (0x00007f8bb2eb4000) libclangBasic.so.5 => /lib64/libclangBasic.so.5 (0x00007f8bb29e3000) libclangCodeGen.so.5 => /lib64/libclangCodeGen.so.5 (0x00007f8bb23f7000) libclangDriver.so.5 => /lib64/libclangDriver.so.5 (0x00007f8bb2060000) libclangFrontend.so.5 => /lib64/libclangFrontend.so.5 (0x00007f8bb1d06000) libclangLex.so.5 => /lib64/libclangLex.so.5 (0x00007f8bb1a3e000) libclangTooling.so.5 => /lib64/libclangTooling.so.5 (0x00007f8bb17d4000) libclangEdit.so.5 => /lib64/libclangEdit.so.5 (0x00007f8bb15c5000) libclangSema.so.5 => /lib64/libclangSema.so.5 (0x00007f8bb0cc9000) libclangAnalysis.so.5 => /lib64/libclangAnalysis.so.5 (0x00007f8bb0a23000) libclangParse.so.5 => /lib64/libclangParse.so.5 (0x00007f8bb0725000) libclangSerialization.so.5 => /lib64/libclangSerialization.so.5 (0x00007f8bb039a000) libLLVM-5.0.so => /lib64/libLLVM-5.0.so (0x00007f8bace98000) libclangASTMatchers.so.5 => /lib64/../lib64/libclangASTMatchers.so.5 (0x00007f8bab735000) libclangFormat.so.5 => /lib64/../lib64/libclangFormat.so.5 (0x00007f8bab4b2000) libclangRewrite.so.5 => /lib64/../lib64/libclangRewrite.so.5 (0x00007f8bab2a1000) libclangToolingCore.so.5 => /lib64/../lib64/libclangToolingCore.so.5 (0x00007f8bab08e000) # Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Fixes: 00b86691c77c ("perf clang: Add builtin clang support ant test case") Link: http://lkml.kernel.org/r/20180404180419.19056-2-sandipan@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-09perf tools: Fix perf builds with clang supportSandipan Das1-1/+2
For libclang, some distro packages provide static libraries (.a) while some provide shared libraries (.so). Currently, perf code can only be linked with static libraries. This makes perf build possible for both cases. Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Fixes: d58ac0bf8d1e ("perf build: Add clang and llvm compile and linking support") Link: http://lkml.kernel.org/r/20180404180419.19056-1-sandipan@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-09perf tools: No need to include namespaces.h in util.hArnaldo Carvalho de Melo1-2/+2
The only thing that is needed there is a forward declaration for 'struct nsinfo', so disentanble this, which in turns allows built-in clang builds, i.e. 'make LIBCLANGLLVM=1 -C tools/perf'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Sandipan Das <sandipan@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-vq26rsuwq1cqylpcyvq89c84@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-06perf hists browser: Remove leftover from row returned from refreshArnaldo Carvalho de Melo1-8/+2
The per-browser screen refresh routine (ui_browser->refresh()) should return the first row that should be cleaned after the rows just printed, in case not all rows available on the screen gets filled. When moving the extra title lines logic from the hists browser to the generic ui_browser class, one piece of that logic remained in the hists browser and then when going back from the annotate browser to the hists browser in a case where fewer lines were displayed in the hists browser, for instance when filtering the entries per substring, one line of the annotate browser would remain on the screen, fix that. Example of the screen artifact: ================================================================================ Samples: 73K of event 'cycles:ppp', 4000 Hz, Event count (approx.): 45172901394 Overhead Shared O Symbol 0.30% [kernel] [k] __indirect_thunk_start 0.09% [kernel] [k] __x86_indirect_thunk_r10 │ lfence ================================================================================ Here from 'perf top' the view was zoomed with '/thunk' to functions having that substring, then the first was annotated and from the annotate browser ESC was pressed, then the first lines were overwritten, but the 'lfence' line remained due to the off by one bug fixed in this cset. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: ef9ff6017e3c ("perf ui browser: Move the extra title lines from the hists browser") Link: https://lkml.kernel.org/n/tip-odryfso74eaarm0z3e4v9owx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-06perf hists browser: Show extra_title_lines in the 'D' debug hotkeyArnaldo Carvalho de Melo1-1/+2
To help in fixing problems in the browser. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-uj0n76yqh5bf98i0edckd47t@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-06perf auxtrace: Make auxtrace_queues__add_buffer() do CPU filteringAdrian Hunter1-10/+10
In preparation for supporting AUX area sampling buffers, auxtrace_queues__add_buffer() needs to be more generic. To that end, move CPU filtering into it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1520327598-1317-8-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-05perf report: Remove duplicated 'samples' in lost samples warningArnaldo Carvalho de Melo1-1/+1
The following message, emitted when samples are lost due to system overload, had one 'samples' too many, ditch it: Processed 25333 samples and lost 20.88% samples! Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Kan Liang <kan.liang@intel.com> Link: https://lkml.kernel.org/n/tip-oev1469y02hmfere6r2kkxp6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-05perf ui browser: Fixup cleaning unused lines at the bottomArnaldo Carvalho de Melo1-2/+2
Now that we can have extra title lines we should use ui_browser->rows and not ->height when drawing lines, as well as adding ui_browser->extra_title_lines to browser->y when cleaning unused lines at the bottom, otherwise we end up clobbering with spaces the last line just shown by ui_browser->refresh() routine. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: ef9ff6017e3c ("perf ui browser: Move the extra title lines from the hists browser") Link: https://lkml.kernel.org/n/tip-dfcpokt1pm5ixm8n9pxwtstz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-05perf annotate browser: Fixup vertical line separating metrics from instructionsArnaldo Carvalho de Melo1-1/+1
Now that we can have extra title lines we should use ui_browser->rows and not ->height when drawing lines, as it will use ui_browser__gotorc() and that will take the extra title lines into account, which was causing an off by one at the end of the vertical line drawn by __ui_browser__vline(), fix it. The visual effect was that the last line, with status messages, was being overwritten by the vertical line, looking like: Press 'h' for help on│key bindings Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: ef9ff6017e3c ("perf ui browser: Move the extra title lines from the hists browser") Link: https://lkml.kernel.org/n/tip-08y1ln3xjn76zvizz1i1dsvn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-05perf annotate: Show group details on the title lineArnaldo Carvalho de Melo1-2/+5
To match what is shown in the main 'perf report/top' title lines, i.e. if a group is being shown, either a real group (recorded with "-e '{a,b,c}') or a forced group (using 'perf report --group' for a perf.data file recorded without {}) we will show multiple columns, one per event, but we were failing to show the group details, so, for: # perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -e {cycles,instructions,cache-misses} # perf report --group The first line was showing just "cycles", now it shows the correct line, which is: Samples: 578 of events 'anon group { cycles, instructions, cache-misses }', 4000 Hz, Event count (approx.): 487421794 syscall_return_via_sysret /lib/modules/4.16.0-rc7/build/vmlinux 0.22 2.97 0.00 │ ↓ jmp 6c │ mov %cr3,%rdi 1.33 10.89 4.00 │ ↓ jmp 62 │ mov %rdi,%rax <SNIP> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 6920e2854e9a ("perf annotate browser: Show extra title line with event information") Link: https://lkml.kernel.org/n/tip-i41tqh17c2dabnyzjh99r1oz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-05perf auxtrace: Make auxtrace_queues__add_buffer() allocate struct bufferAdrian Hunter1-30/+24
In preparation for supporting AUX area sampling buffers, auxtrace_queues__add_buffer() needs to be more generic. To that end, move memory allocation for struct buffer into it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1520327598-1317-7-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-11 18:32:08 +0300