summaryrefslogtreecommitdiff
path: root/tools/objtool
AgeCommit message (Collapse)AuthorFilesLines
2022-10-11Merge tag 'mm-stable-2022-10-08' of ↵Linus Torvalds1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ...
2022-10-10Merge tag 'objtool-core-2022-10-07' of ↵Linus Torvalds2-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool updates from Ingo Molnar: - Remove the "ANNOTATE_NOENDBR on ENDBR" warning: it's not really useful and only found a non-bug false positive so far. - Properly decode LOOP/LOOPE/LOOPNE, which were missing from the x86 decoder. Because these instructions are rather ineffective, they never showed up in compiler output, but they are simple enough to support, so add them for completeness. - A bit more cross-arch preparatory work. * tag 'objtool-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool,x86: Teach decode about LOOP* instructions objtool: Remove "ANNOTATE_NOENDBR on ENDBR" warning objtool: Use arch_jump_destination() in read_intra_function_calls()
2022-10-04Merge tag 'net-next-6.1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF: - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols: - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API: - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers: - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers: - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support" * tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits) eth: pse: add missing static inlines once: rename _SLOW to _SLEEPABLE net: pse-pd: add regulator based PSE driver dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller ethtool: add interface to interact with Ethernet Power Equipment net: mdiobus: search for PSE nodes by parsing PHY nodes. net: mdiobus: fwnode_mdiobus_register_phy() rework error handling net: add framework to support Ethernet PSE and PDs devices dt-bindings: net: phy: add PoDL PSE property net: marvell: prestera: Propagate nh state from hw to kernel net: marvell: prestera: Add neighbour cache accounting net: marvell: prestera: add stub handler neighbour events net: marvell: prestera: Add heplers to interact with fib_notifier_info net: marvell: prestera: Add length macros for prestera_ip_addr net: marvell: prestera: add delayed wq and flush wq on deinit net: marvell: prestera: Add strict cleanup of fib arbiter net: marvell: prestera: Add cleanup of allocated fib_nodes net: marvell: prestera: Add router nexthops ABI eth: octeon: fix build after netif_napi_add() changes net/mlx5: E-Switch, Return EBUSY if can't get mode lock ...
2022-10-04Merge tag 'x86_cpu_for_v6.1_rc1' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu updates from Borislav Petkov: - Print the CPU number at segfault time. The number printed is not always accurate (preemption is enabled at that time) but the print string contains "likely" and after a lot of back'n'forth on this, this was the consensus that was reached. See thread at [1]. - After a *lot* of testing and polishing, finally the clear_user() improvements to inline REP; STOSB by default Link: https://lore.kernel.org/r/5d62c1d0-7425-d5bb-ecb5-1dc3b4d7d245@intel.com [1] * tag 'x86_cpu_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Print likely CPU at segfault time x86/clear_user: Make it faster
2022-10-04objtool: kmsan: list KMSAN API functions as uaccess-safeAlexander Potapenko1-0/+20
KMSAN inserts API function calls in a lot of places (function entries and exits, local variables, memory accesses), so they may get called from the uaccess regions as well. KMSAN API functions are used to update the metadata (shadow/origin pages) for kernel memory accesses. The metadata pages for kernel pointers are also located in the kernel memory, so touching them is not a problem. For userspace pointers, no metadata is allocated. If an API function is supposed to read or modify the metadata, it does so for kernel pointers and ignores userspace pointers. If an API function is supposed to return a pair of metadata pointers for the instrumentation to use (like all __msan_metadata_ptr_for_TYPE_SIZE() functions do), it returns the allocated metadata for kernel pointers and special dummy buffers residing in the kernel memory for userspace pointers. As a result, none of KMSAN API functions perform userspace accesses, but since they might be called from UACCESS regions they use user_access_save/restore(). Link: https://lkml.kernel.org/r/20220915150417.722975-32-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-26objtool: Disable CFI warningsSami Tolvanen1-1/+6
The __cfi_ preambles contain a mov instruction that embeds the KCFI type identifier in the following format: ; type preamble __cfi_function: mov <id>, %eax function: ... While the preamble symbols are STT_FUNC and contain valid instructions, they are never executed and always fall through. Skip the warning for them. .kcfi_traps sections point to CFI traps in text sections. Also skip the warning about them referencing !ENDBR instructions. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220908215504.3686827-18-samitolvanen@google.com
2022-09-26objtool: Preserve special st_shndx indexes in elf_update_symbolSami Tolvanen1-1/+6
elf_update_symbol fails to preserve the special st_shndx values between [SHN_LORESERVE, SHN_HIRESERVE], which results in it converting SHN_ABS entries into SHN_UNDEF, for example. Explicitly check for the special indexes and ensure these symbols are not marked undefined. Fixes: ead165fa1042 ("objtool: Fix symbol creation") Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220908215504.3686827-17-samitolvanen@google.com
2022-09-16ftrace: Add HAVE_DYNAMIC_FTRACE_NO_PATCHABLEPeter Zijlstra (Intel)1-1/+2
x86 will shortly start using -fpatchable-function-entry for purposes other than ftrace, make sure the __patchable_function_entry section isn't merged in the mcount_loc section. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220903131154.420467-2-jolsa@kernel.org
2022-09-15objtool,x86: Teach decode about LOOP* instructionsPeter Zijlstra1-0/+6
When 'discussing' control flow Masami mentioned the LOOP* instructions and I realized objtool doesn't decode them properly. As it turns out, these instructions are somewhat inefficient and as such unlikely to be emitted by the compiler (a few vmlinux.o checks can't find a single one) so this isn't critical, but still, best to decode them properly. Reported-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/Yxhd4EMKyoFoH9y4@hirez.programming.kicks-ass.net
2022-08-28Merge tag 'x86-urgent-2022-08-28' of ↵Linus Torvalds1-16/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 fixes from Ingo Molnar: - Fix PAT on Xen, which caused i915 driver failures - Fix compat INT 80 entry crash on Xen PV guests - Fix 'MMIO Stale Data' mitigation status reporting on older Intel CPUs - Fix RSB stuffing regressions - Fix ORC unwinding on ftrace trampolines - Add Intel Raptor Lake CPU model number - Fix (work around) a SEV-SNP bootloader bug providing bogus values in boot_params->cc_blob_address, by ignoring the value on !SEV-SNP bootups. - Fix SEV-SNP early boot failure - Fix the objtool list of noreturn functions and annotate snp_abort(), which bug confused objtool on gcc-12. - Fix the documentation for retbleed * tag 'x86-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation/ABI: Mention retbleed vulnerability info file for sysfs x86/sev: Mark snp_abort() noreturn x86/sev: Don't use cc_platform_has() for early SEV-SNP calls x86/boot: Don't propagate uninitialized boot_params->cc_blob_address x86/cpu: Add new Raptor Lake CPU model number x86/unwind/orc: Unwind ftrace trampolines with correct ORC entry x86/nospec: Fix i386 RSB stuffing x86/nospec: Unwreck the RSB stuffing x86/bugs: Add "unknown" reporting for MMIO Stale Data x86/entry: Fix entry_INT80_compat for Xen PV guests x86/PAT: Have pat_enabled() properly reflect state when running on Xen
2022-08-25x86/sev: Mark snp_abort() noreturnBorislav Petkov1-16/+18
Mark both the function prototype and definition as noreturn in order to prevent the compiler from doing transformations which confuse objtool like so: vmlinux.o: warning: objtool: sme_enable+0x71: unreachable instruction This triggers with gcc-12. Add it and sev_es_terminate() to the objtool noreturn tracking array too. Sort it while at it. Suggested-by: Michael Matz <matz@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220824152420.20547-1-bp@alien8.de
2022-08-19objtool: Remove "ANNOTATE_NOENDBR on ENDBR" warningJosh Poimboeuf1-3/+0
This warning isn't very useful: why would you put ANNOTATE_NOENDBR on ENDBR, and if you did, what's the harm? And thus far it's only found one non-bug, where the '__end_entry_SYSENTER_compat' label happens to land on the ENDBR from entry_SYSCALL_compat: vmlinux.o: warning: objtool: entry_SYSCALL_compat+0x0: ANNOTATE_NOENDBR on ENDBR .. which is fine. Just remove the warning. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/142341a5dafdfc788e4c95b9e226a6eefc9b626e.1660839773.git.jpoimboe@kernel.org
2022-08-19objtool: Use arch_jump_destination() in read_intra_function_calls()Chen Zhongjin1-1/+1
Use arch_jump_destiation() instead of the open-coded 'offset + len + immediate' that is x86 specific. Avoids future trouble with other architectures. Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220818014553.220261-1-chenzhongjin@huawei.com
2022-08-19x86/ibt, objtool: Add IBT_NOSEAL()Josh Poimboeuf1-1/+2
Add a macro which prevents a function from getting sealed if there are no compile-time references to it. Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Message-Id: <20220818213927.e44fmxkoq4yj6ybn@treble> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-18x86/clear_user: Make it fasterBorislav Petkov1-0/+3
Based on a patch by Mark Hemment <markhemm@googlemail.com> and incorporating very sane suggestions from Linus. The point here is to have the default case with FSRM - which is supposed to be the majority of x86 hw out there - if not now then soon - be directly inlined into the instruction stream so that no function call overhead is taking place. Drop the early clobbers from the @size and @addr operands as those are not needed anymore since we have single instruction alternatives. The benchmarks I ran would show very small improvements and a PF benchmark would even show weird things like slowdowns with higher core counts. So for a ~6m running the git test suite, the function gets called under 700K times, all from padzero(): <...>-2536 [006] ..... 261.208801: padzero: to: 0x55b0663ed214, size: 3564, cycles: 21900 <...>-2536 [006] ..... 261.208819: padzero: to: 0x7f061adca078, size: 3976, cycles: 17160 <...>-2537 [008] ..... 261.211027: padzero: to: 0x5572d019e240, size: 3520, cycles: 23850 <...>-2537 [008] ..... 261.211049: padzero: to: 0x7f1288dc9078, size: 3976, cycles: 15900 ... which is around 1%-ish of the total time and which is consistent with the benchmark numbers. So Mel gave me the idea to simply measure how fast the function becomes. I.e.: start = rdtsc_ordered(); ret = __clear_user(to, n); end = rdtsc_ordered(); Computing the mean average of all the samples collected during the test suite run then shows some improvement: clear_user_original: Amean: 9219.71 (Sum: 6340154910, samples: 687674) fsrm: Amean: 8030.63 (Sum: 5522277720, samples: 687652) That's on Zen3. The situation looks a lot more confusing on Intel: Icelake: clear_user_original: Amean: 19679.4 (Sum: 13652560764, samples: 693750) Amean: 19743.7 (Sum: 13693470604, samples: 693562) (I ran it twice just to be sure.) ERMS: Amean: 20374.3 (Sum: 13910601024, samples: 682752) Amean: 20453.7 (Sum: 14186223606, samples: 693576) FSRM: Amean: 20458.2 (Sum: 13918381386, sample s: 680331) The original microbenchmark which people were complaining about: for i in $(seq 1 10); do dd if=/dev/zero of=/dev/null bs=1M status=progress count=65536; done 2>&1 | grep copied 32207011840 bytes (32 GB, 30 GiB) copied, 1 s, 32.2 GB/s 68719476736 bytes (69 GB, 64 GiB) copied, 1.93069 s, 35.6 GB/s 37597741056 bytes (38 GB, 35 GiB) copied, 1 s, 37.6 GB/s 68719476736 bytes (69 GB, 64 GiB) copied, 1.78017 s, 38.6 GB/s 62020124672 bytes (62 GB, 58 GiB) copied, 2 s, 31.0 GB/s 68719476736 bytes (69 GB, 64 GiB) copied, 2.13716 s, 32.2 GB/s 60010004480 bytes (60 GB, 56 GiB) copied, 1 s, 60.0 GB/s 68719476736 bytes (69 GB, 64 GiB) copied, 1.14129 s, 60.2 GB/s 53212086272 bytes (53 GB, 50 GiB) copied, 1 s, 53.2 GB/s 68719476736 bytes (69 GB, 64 GiB) copied, 1.28398 s, 53.5 GB/s 55698259968 bytes (56 GB, 52 GiB) copied, 1 s, 55.7 GB/s 68719476736 bytes (69 GB, 64 GiB) copied, 1.22507 s, 56.1 GB/s 55306092544 bytes (55 GB, 52 GiB) copied, 1 s, 55.3 GB/s 68719476736 bytes (69 GB, 64 GiB) copied, 1.23647 s, 55.6 GB/s 54387539968 bytes (54 GB, 51 GiB) copied, 1 s, 54.4 GB/s 68719476736 bytes (69 GB, 64 GiB) copied, 1.25693 s, 54.7 GB/s 50566529024 bytes (51 GB, 47 GiB) copied, 1 s, 50.6 GB/s 68719476736 bytes (69 GB, 64 GiB) copied, 1.35096 s, 50.9 GB/s 58308165632 bytes (58 GB, 54 GiB) copied, 1 s, 58.3 GB/s 68719476736 bytes (69 GB, 64 GiB) copied, 1.17394 s, 58.5 GB/s Now the same thing with smaller buffers: for i in $(seq 1 10); do dd if=/dev/zero of=/dev/null bs=1M status=progress count=8192; done 2>&1 | grep copied 8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.28485 s, 30.2 GB/s 8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.276112 s, 31.1 GB/s 8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.29136 s, 29.5 GB/s 8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.283803 s, 30.3 GB/s 8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.306503 s, 28.0 GB/s 8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.349169 s, 24.6 GB/s 8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.276912 s, 31.0 GB/s 8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.265356 s, 32.4 GB/s 8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.28464 s, 30.2 GB/s 8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.242998 s, 35.3 GB/s is also not conclusive because it all depends on the buffer sizes, their alignments and when the microcode detects that cachelines can be aggregated properly and copied in bigger sizes. Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/CAHk-=wh=Mu_EYhtOmPn6AxoQZyEh-4fo2Zx3G7rBv1g7vwoKiw@mail.gmail.com
2022-08-03Merge tag 'docs-6.0' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation updates from Jonathan Corbet: "This was a moderately busy cycle for documentation, but nothing all that earth-shaking: - More Chinese translations, and an update to the Italian translations. The Japanese, Korean, and traditional Chinese translations are more-or-less unmaintained at this point, instead. - Some build-system performance improvements. - The removal of the archaic submitting-drivers.rst document, with the movement of what useful material that remained into other docs. - Improvements to sphinx-pre-install to, hopefully, give more useful suggestions. - A number of build-warning fixes Plus the usual collection of typo fixes, updates, and more" * tag 'docs-6.0' of git://git.lwn.net/linux: (92 commits) docs: efi-stub: Fix paths for x86 / arm stubs Docs/zh_CN: Update the translation of sched-stats to 5.19-rc8 Docs/zh_CN: Update the translation of pci to 5.19-rc8 Docs/zh_CN: Update the translation of pci-iov-howto to 5.19-rc8 Docs/zh_CN: Update the translation of usage to 5.19-rc8 Docs/zh_CN: Update the translation of testing-overview to 5.19-rc8 Docs/zh_CN: Update the translation of sparse to 5.19-rc8 Docs/zh_CN: Update the translation of kasan to 5.19-rc8 Docs/zh_CN: Update the translation of iio_configfs to 5.19-rc8 doc:it_IT: align Italian documentation docs: Remove spurious tag from admin-guide/mm/overcommit-accounting.rst Documentation: process: Update email client instructions for Thunderbird docs: ABI: correct QEMU fw_cfg spec path doc/zh_CN: remove submitting-driver reference from docs docs: zh_TW: align to submitting-drivers removal docs: zh_CN: align to submitting-drivers removal docs: ko_KR: howto: remove reference to removed submitting-drivers docs: ja_JP: howto: remove reference to removed submitting-drivers docs: it_IT: align to submitting-drivers removal docs: process: remove outdated submitting-drivers.rst ...
2022-07-12Merge tag 'x86_bugs_retbleed' of ↵Linus Torvalds9-22/+356
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 retbleed fixes from Borislav Petkov: "Just when you thought that all the speculation bugs were addressed and solved and the nightmare is complete, here's the next one: speculating after RET instructions and leaking privileged information using the now pretty much classical covert channels. It is called RETBleed and the mitigation effort and controlling functionality has been modelled similar to what already existing mitigations provide" * tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) x86/speculation: Disable RRSBA behavior x86/kexec: Disable RET on kexec x86/bugs: Do not enable IBPB-on-entry when IBPB is not supported x86/entry: Move PUSH_AND_CLEAR_REGS() back into error_entry x86/bugs: Add Cannon lake to RETBleed affected CPU list x86/retbleed: Add fine grained Kconfig knobs x86/cpu/amd: Enumerate BTC_NO x86/common: Stamp out the stepping madness KVM: VMX: Prevent RSB underflow before vmenter x86/speculation: Fill RSB on vmexit for IBRS KVM: VMX: Fix IBRS handling after vmexit KVM: VMX: Prevent guest RSB poisoning attacks with eIBRS KVM: VMX: Convert launched argument to flags KVM: VMX: Flatten __vmx_vcpu_run() objtool: Re-add UNWIND_HINT_{SAVE_RESTORE} x86/speculation: Remove x86_spec_ctrl_mask x86/speculation: Use cached host SPEC_CTRL value for guest entry/exit x86/speculation: Fix SPEC_CTRL write on SMT state change x86/speculation: Fix firmware entry SPEC_CTRL handling x86/speculation: Fix RSB filling with CONFIG_RETPOLINE=n ...
2022-07-07objtool: update objtool.txt referencesMauro Carvalho Chehab1-1/+1
Changeset a8e35fece49b ("objtool: Update documentation") renamed: tools/objtool/Documentation/stack-validation.txt to: tools/objtool/Documentation/objtool.txt. Update the cross-references accordingly. Fixes: a8e35fece49b ("objtool: Update documentation") Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/ec285ece6348a5be191aebe45f78d06b3319056b.1656234456.git.mchehab@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-07-07x86/ibt, objtool: Don't discard text references from tracepoint sectionPeter Zijlstra1-2/+1
On Tue, Jun 28, 2022 at 04:28:58PM +0800, Pengfei Xu wrote: > # ./ftracetest > === Ftrace unit tests === > [1] Basic trace file check [PASS] > [2] Basic test for tracers [PASS] > [3] Basic trace clock test [PASS] > [4] Basic event tracing check [PASS] > [5] Change the ringbuffer size [PASS] > [6] Snapshot and tracing setting [PASS] > [7] trace_pipe and trace_marker [PASS] > [8] Test ftrace direct functions against tracers [UNRESOLVED] > [9] Test ftrace direct functions against kprobes [UNRESOLVED] > [10] Generic dynamic event - add/remove eprobe events [FAIL] > [11] Generic dynamic event - add/remove kprobe events > > It 100% reproduced in step 11 and then missing ENDBR BUG generated: > " > [ 9332.752836] mmiotrace: enabled CPU7. > [ 9332.788612] mmiotrace: disabled. > [ 9337.103426] traps: Missing ENDBR: syscall_regfunc+0x0/0xb0 It turns out that while syscall_regfunc() does have an ENDBR when generated, it gets sealed by objtool's .ibt_endbr_seal list. Since the only text references to this function: $ git grep syscall_regfunc include/linux/tracepoint.h:extern int syscall_regfunc(void); include/trace/events/syscalls.h: syscall_regfunc, syscall_unregfunc include/trace/events/syscalls.h: syscall_regfunc, syscall_unregfunc kernel/tracepoint.c:int syscall_regfunc(void) appear in the __tracepoint section which is excluded by objtool. Fixes: 3c6f9f77e618 ("objtool: Rework ibt and extricate from stack validation") Reported-by: Pengfei Xu <pengfei.xu@intel.com Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/Yrrepdaow4F5kqG0@hirez.programming.kicks-ass.net
2022-06-29x86/retbleed: Add fine grained Kconfig knobsPeter Zijlstra3-2/+15
Do fine-grained Kconfig for all the various retbleed parts. NOTE: if your compiler doesn't support return thunks this will silently 'upgrade' your mitigation to IBPB, you might not like this. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2022-06-27objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}Josh Poimboeuf2-9/+50
Commit c536ed2fffd5 ("objtool: Remove SAVE/RESTORE hints") removed the save/restore unwind hints because they were no longer needed. Now they're going to be needed again so re-add them. Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2022-06-27objtool: Add entry UNRET validationPeter Zijlstra4-11/+184
Since entry asm is tricky, add a validation pass that ensures the retbleed mitigation has been done before the first actual RET instruction. Entry points are those that either have UNWIND_HINT_ENTRY, which acts as UNWIND_HINT_EMPTY but marks the instruction as an entry point, or those that have UWIND_HINT_IRET_REGS at +0. This is basically a variant of validate_branch() that is intra-function and it will simply follow all branches from marked entry points and ensures that all paths lead to ANNOTATE_UNRET_END. If a path hits RET or an indirection the path is a fail and will be reported. There are 3 ANNOTATE_UNRET_END instances: - UNTRAIN_RET itself - exception from-kernel; this path doesn't need UNTRAIN_RET - all early exceptions; these also don't need UNTRAIN_RET Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2022-06-27objtool: Update Retpoline validationPeter Zijlstra1-6/+13
Update retpoline validation with the new CONFIG_RETPOLINE requirement of not having bare naked RET instructions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2022-06-27x86: Add magic AMD return-thunkPeter Zijlstra1-3/+19
Note: needs to be in a section distinct from Retpolines such that the Retpoline RET substitution cannot possibly use immediate jumps. ORC unwinding for zen_untrain_ret() and __x86_return_thunk() is a little tricky but works due to the fact that zen_untrain_ret() doesn't have any stack ops and as such will emit a single ORC entry at the start (+0x3f). Meanwhile, unwinding an IP, including the __x86_return_thunk() one (+0x40) will search for the largest ORC entry smaller or equal to the IP, these will find the one ORC entry (+0x3f) and all works. [ Alexandre: SVM part. ] [ bp: Build fix, massages. ] Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2022-06-27objtool: Treat .text.__x86.* as noinstrPeter Zijlstra1-1/+2
Needed because zen_untrain_ret() will be called from noinstr code. Also makes sense since the thunks MUST NOT contain instrumentation nor be poked with dynamic instrumentation. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2022-06-27x86,objtool: Create .return_sitesPeter Zijlstra6-0/+83
Find all the return-thunk sites and record them in a .return_sites section such that the kernel can undo this. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2022-05-27x86/extable: Annotate ex_handler_msr_mce() as a dead endBorislav Petkov1-0/+1
Fix vmlinux.o: warning: objtool: fixup_exception+0x2d6: unreachable instruction Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220520192729.23969-1-bp@alien8.de
2022-05-27objtool: Mark __ubsan_handle_builtin_unreachable() as noreturnPeter Zijlstra1-1/+2
fs/ntfs3/ntfs3.prelink.o: warning: objtool: ni_read_frame() falls through to next function ni_readpage_cmpr.cold() That is in fact: 000000000000124a <ni_read_frame.cold>: 124a: 44 89 e0 mov %r12d,%eax 124d: 0f b6 55 98 movzbl -0x68(%rbp),%edx 1251: 48 c7 c7 00 00 00 00 mov $0x0,%rdi 1254: R_X86_64_32S .data+0x1380 1258: 48 89 c6 mov %rax,%rsi 125b: e8 00 00 00 00 call 1260 <ni_read_frame.cold+0x16> 125c: R_X86_64_PLT32 __ubsan_handle_shift_out_of_bounds-0x4 1260: 48 8d 7d cc lea -0x34(%rbp),%rdi 1264: e8 00 00 00 00 call 1269 <ni_read_frame.cold+0x1f> 1265: R_X86_64_PLT32 __tsan_read4-0x4 1269: 8b 45 cc mov -0x34(%rbp),%eax 126c: e9 00 00 00 00 jmp 1271 <ni_read_frame.cold+0x27> 126d: R_X86_64_PC32 .text+0x19109 1271: 48 8b 75 a0 mov -0x60(%rbp),%rsi 1275: 48 63 d0 movslq %eax,%rdx 1278: 48 c7 c7 00 00 00 00 mov $0x0,%rdi 127b: R_X86_64_32S .data+0x13a0 127f: 89 45 88 mov %eax,-0x78(%rbp) 1282: e8 00 00 00 00 call 1287 <ni_read_frame.cold+0x3d> 1283: R_X86_64_PLT32 __ubsan_handle_shift_out_of_bounds-0x4 1287: 8b 45 88 mov -0x78(%rbp),%eax 128a: e9 00 00 00 00 jmp 128f <ni_read_frame.cold+0x45> 128b: R_X86_64_PC32 .text+0x19098 128f: 48 c7 c7 00 00 00 00 mov $0x0,%rdi 1292: R_X86_64_32S .data+0x11f0 1296: e8 00 00 00 00 call 129b <ni_readpage_cmpr.cold> 1297: R_X86_64_PLT32 __ubsan_handle_builtin_unreachable-0x4 000000000000129b <ni_readpage_cmpr.cold>: Tell objtool that __ubsan_handle_builtin_unreachable() is a noreturn. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220502091514.GB479834@worktop.programming.kicks-ass.net
2022-05-26Merge tag 'kbuild-v5.19' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add HOSTPKG_CONFIG env variable to allow users to override pkg-config - Support W=e as a shorthand for KCFLAGS=-Werror - Fix CONFIG_IKHEADERS build to support toybox cpio - Add scripts/dummy-tools/pahole to ease distro packagers' life - Suppress false-positive warnings from checksyscalls.sh for W=2 build - Factor out the common code of arch/*/boot/install.sh into scripts/install.sh - Support 'kernel-install' tool in scripts/prune-kernel - Refactor module-versioning to link the symbol versions at the final link of vmlinux and modules - Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in an arch-agnostic way - Refactor modpost, Makefiles * tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits) genksyms: adjust the output format to modpost kbuild: stop merging *.symversions kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS modpost: extract symbol versions from *.cmd files modpost: add sym_find_with_module() helper modpost: change the license of EXPORT_SYMBOL to bool type modpost: remove left-over cross_compile declaration kbuild: record symbol versions in *.cmd files kbuild: generate a list of objects in vmlinux modpost: move *.mod.c generation to write_mod_c_files() modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header scripts/prune-kernel: Use kernel-install if available kbuild: factor out the common installation code into scripts/install.sh modpost: split new_symbol() to symbol allocation and hash table addition modpost: make sym_add_exported() always allocate a new symbol modpost: make multiple export error modpost: dump Module.symvers in the same order of modules.order modpost: traverse the namespace_list in order modpost: use doubly linked list for dump_lists modpost: traverse unresolved symbols in order ...
2022-05-20objtool: Fix objtool regression on x32 systemsMikulas Patocka3-7/+8
Commit c087c6e7b551 ("objtool: Fix type of reloc::addend") failed to appreciate cross building from ILP32 hosts, where 'int' == 'long' and the issue persists. As such, use s64/int64_t/Elf64_Sxword for this field and suffer the pain that is ISO C99 printf formats for it. Fixes: c087c6e7b551 ("objtool: Fix type of reloc::addend") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> [peterz: reword changelog, s/long long/s64/] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/alpine.LRH.2.02.2205161041260.11556@file01.intranet.prod.int.rdu2.redhat.com
2022-05-20objtool: Fix symbol creationPeter Zijlstra1-69/+129
Nathan reported objtool failing with the following messages: warning: objtool: no non-local symbols !? warning: objtool: gelf_update_symshndx: invalid section index The problem is due to commit 4abff6d48dbc ("objtool: Fix code relocs vs weak symbols") failing to consider the case where an object would have no non-local symbols. The problem that commit tries to address is adding a STB_LOCAL symbol to the symbol table in light of the ELF spec's requirement that: In each symbol table, all symbols with STB_LOCAL binding preced the weak and global symbols. As ``Sections'' above describes, a symbol table section's sh_info section header member holds the symbol table index for the first non-local symbol. The approach taken is to find this first non-local symbol, move that to the end and then re-use the freed spot to insert a new local symbol and increment sh_info. Except it never considered the case of object files without global symbols and got a whole bunch of details wrong -- so many in fact that it is a wonder it ever worked :/ Specifically: - It failed to re-hash the symbol on the new index, so a subsequent find_symbol_by_index() would not find it at the new location and a query for the old location would now return a non-deterministic choice between the old and new symbol. - It failed to appreciate that the GElf wrappers are not a valid disk format (it works because GElf is basically Elf64 and we only support x86_64 atm.) - It failed to fully appreciate how horrible the libelf API really is and got the gelf_update_symshndx() call pretty much completely wrong; with the direct consequence that if inserting a second STB_LOCAL symbol would require moving the same STB_GLOBAL symbol again it would completely come unstuck. Write a new elf_update_symbol() function that wraps all the magic required to update or create a new symbol at a given index. Specifically, gelf_update_sym*() require an @ndx argument that is relative to the @data argument; this means you have to manually iterate the section data descriptor list and update @ndx. Fixes: 4abff6d48dbc ("objtool: Fix code relocs vs weak symbols") Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/YoPCTEYjoPqE4ZxB@hirez.programming.kicks-ass.net
2022-05-12objtool: Remove libsubcmd.a when make cleanTiezhu Yang1-1/+1
The file libsubcmd.a still exists after make clean, remove it. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/1652258270-6278-3-git-send-email-yangtiezhu@loongson.cn
2022-05-12objtool: Remove inat-tables.c when make cleanTiezhu Yang1-1/+1
When build objtool on x86, the generated file inat-tables.c is in arch/x86/lib instead of arch/x86, use the correct dir to remove it when make clean. $ cd tools/objtool $ make [...] GEN arch/x86/lib/inat-tables.c [...] Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/1652258270-6278-2-git-send-email-yangtiezhu@loongson.cn
2022-04-22objtool: Update documentationJosh Poimboeuf1-20/+102
The objtool documentation is very stack validation centric. Broaden the documentation and describe all the features objtool supports. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/b6a84d301d9f73ec6725752654097f4e31fa1b69.1650300597.git.jpoimboe@redhat.com
2022-04-22objtool: Remove --lto and --vmlinux in favor of --linkJosh Poimboeuf5-33/+64
The '--lto' option is a confusing way of telling objtool to do stack validation despite it being a linked object. It's no longer needed now that an explicit '--stackval' option exists. The '--vmlinux' option is also redundant. Remove both options in favor of a straightforward '--link' option which identifies a linked object. Also, implicitly set '--link' with a warning if the user forgets to do so and we can tell that it's a linked object. This makes it easier for manual vmlinux runs. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/dcd3ceffd15a54822c6183e5766d21ad06082b45.1650300597.git.jpoimboe@redhat.com
2022-04-22objtool: Make noinstr hacks optionalJosh Poimboeuf3-2/+9
Objtool has some hacks in place to workaround toolchain limitations which otherwise would break no-instrumentation rules. Make the hacks explicit (and optional for other arches) by turning it into a cmdline option and kernel config option. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/b326eeb9c33231b9dfbb925f194ed7ee40edcd7c.1650300597.git.jpoimboe@redhat.com
2022-04-22objtool: Make jump label hack optionalJosh Poimboeuf3-9/+31
Objtool secretly does a jump label hack to overcome the limitations of the toolchain. Make the hack explicit (and optional for other arches) by turning it into a cmdline option and kernel config option. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/3bdcbfdd27ecb01ddec13c04bdf756a583b13d24.1650300597.git.jpoimboe@redhat.com
2022-04-22objtool: Make static call annotation optionalJosh Poimboeuf3-4/+9
As part of making objtool more modular, put the existing static call code behind a new '--static-call' option. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/d59ac57ef3d6d8380cdce20322314c9e2e556750.1650300597.git.jpoimboe@redhat.com
2022-04-22objtool: Make stack validation frame-pointer-specificJosh Poimboeuf3-5/+3
Now that CONFIG_STACK_VALIDATION is frame-pointer specific, do the same for the '--stackval' option. Now the '--no-fp' option is redundant and can be removed. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/f563fa064b3b63d528de250c72012d49e14742a3.1650300597.git.jpoimboe@redhat.com
2022-04-22objtool: Extricate sls from stack validationJosh Poimboeuf1-13/+43
Extricate sls functionality from validate_branch() so they can be executed (or ported) independently from each other. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/2545c86ffa5f27497f0d0c542540ad4a4be3c5a5.1650300597.git.jpoimboe@redhat.com
2022-04-22objtool: Rework ibt and extricate from stack validationJosh Poimboeuf1-133/+147
Extricate ibt from validate_branch() so they can be executed (or ported) independently from each other. While shuffling code around, simplify and improve the ibt logic: - Ignore an explicit list of known sections which reference functions for reasons other than indirect branching to them. This helps prevent unnnecesary sealing. - Warn on missing !ENDBR for all other sections, not just .data and .rodata. This finds additional warnings, because there are sections other than .[ro]data which reference function pointers. For example, the ksymtab sections which are used for exporting symbols. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/fd1435e46bb95f81031b8fb1fa360f5f787e4316.1650300597.git.jpoimboe@redhat.com
2022-04-22objtool: Make stack validation optionalJosh Poimboeuf3-13/+18
Make stack validation an explicit cmdline option so that individual objtool features can be enabled individually by other arches. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/52da143699574d756e65ca4c9d4acaffe9b0fe5f.1650300597.git.jpoimboe@redhat.com
2022-04-22objtool: Add option to print section addressesJosh Poimboeuf3-14/+19
To help prevent objtool users from having to do math to convert function addresses to section addresses, and to help out with finding data addresses reported by IBT validation, add an option to print the section address in addition to the function address. Normal: vmlinux.o: warning: objtool: fixup_exception()+0x2d1: unreachable instruction With '--sec-address': vmlinux.o: warning: objtool: fixup_exception()+0x2d1 (.text+0x76c51): unreachable instruction Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/2cea4d5299d53d1a4c09212a6ad7820aa46fda7a.1650300597.git.jpoimboe@redhat.com
2022-04-22objtool: Don't print parentheses in function addressesJosh Poimboeuf1-5/+1
The parentheses in the "func()+off" address output are inconsistent with how the kernel prints function addresses, breaking Peter's scripts. Remove them. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/f2bec70312f62ef4f1ea21c134d9def627182ad3.1650300597.git.jpoimboe@redhat.com
2022-04-22objtool: Ditch subcommandsJosh Poimboeuf8-202/+66
Objtool has a fairly singular focus. It runs on object files and does validations and transformations which can be combined in various ways. The subcommand model has never been a good fit, making it awkward to combine and remove options. Remove the "check" and "orc" subcommands in favor of a more traditional cmdline option model. This makes it much more flexible to use, and easier to port individual features to other arches. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/5c61ebf805e90aefc5fa62bc63468ffae53b9df6.1650300597.git.jpoimboe@redhat.com
2022-04-22objtool: Reorganize cmdline optionsJosh Poimboeuf7-62/+84
Split the existing options into two groups: actions, which actually do something; and options, which modify the actions in some way. Also there's no need to have short flags for all the non-action options. Reserve short flags for the more important actions. While at it: - change a few of the short flags to be more intuitive - make option descriptions more consistently descriptive - sort options in the source like they are when printed - move options to a global struct Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/9dcaa752f83aca24b1b21f0b0eeb28a0c181c0b0.1650300597.git.jpoimboe@redhat.com
2022-04-22Merge branch 'tip/x86/urgent'Peter Zijlstra1-8/+5
Merge the x86/urgent objtool/IBT changes as a base Signed-off-by: Peter Zijlstra <peterz@infradead.org>
2022-04-22objtool: Fix code relocs vs weak symbolsPeter Zijlstra1-22/+165
Occasionally objtool driven code patching (think .static_call_sites .retpoline_sites etc..) goes sideways and it tries to patch an instruction that doesn't match. Much head-scatching and cursing later the problem is as outlined below and affects every section that objtool generates for us, very much including the ORC data. The below uses .static_call_sites because it's convenient for demonstration purposes, but as mentioned the ORC sections, .retpoline_sites and __mount_loc are all similarly affected. Consider: foo-weak.c: extern void __SCT__foo(void); __attribute__((weak)) void foo(void) { return __SCT__foo(); } foo.c: extern void __SCT__foo(void); extern void my_foo(void); void foo(void) { my_foo(); return __SCT__foo(); } These generate the obvious code (gcc -O2 -fcf-protection=none -fno-asynchronous-unwind-tables -c foo*.c): foo-weak.o: 0000000000000000 <foo>: 0: e9 00 00 00 00 jmpq 5 <foo+0x5> 1: R_X86_64_PLT32 __SCT__foo-0x4 foo.o: 0000000000000000 <foo>: 0: 48 83 ec 08 sub $0x8,%rsp 4: e8 00 00 00 00 callq 9 <foo+0x9> 5: R_X86_64_PLT32 my_foo-0x4 9: 48 83 c4 08 add $0x8,%rsp d: e9 00 00 00 00 jmpq 12 <foo+0x12> e: R_X86_64_PLT32 __SCT__foo-0x4 Now, when we link these two files together, you get something like (ld -r -o foos.o foo-weak.o foo.o): foos.o: 0000000000000000 <foo-0x10>: 0: e9 00 00 00 00 jmpq 5 <foo-0xb> 1: R_X86_64_PLT32 __SCT__foo-0x4 5: 66 2e 0f 1f 84 00 00 00 00 00 nopw %cs:0x0(%rax,%rax,1) f: 90 nop 0000000000000010 <foo>: 10: 48 83 ec 08 sub $0x8,%rsp 14: e8 00 00 00 00 callq 19 <foo+0x9> 15: R_X86_64_PLT32 my_foo-0x4 19: 48 83 c4 08 add $0x8,%rsp 1d: e9 00 00 00 00 jmpq 22 <foo+0x12> 1e: R_X86_64_PLT32 __SCT__foo-0x4 Noting that ld preserves the weak function text, but strips the symbol off of it (hence objdump doing that funny negative offset thing). This does lead to 'interesting' unused code issues with objtool when ran on linked objects, but that seems to be working (fingers crossed). So far so good.. Now lets consider the objtool static_call output section (readelf output, old binutils): foo-weak.o: Relocation section '.rela.static_call_sites' at offset 0x2c8 contains 1 entry: Offset Info Type Symbol's Value Symbol's Name + Addend 0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 .text + 0 0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1 foo.o: Relocation section '.rela.static_call_sites' at offset 0x310 contains 2 entries: Offset Info Type Symbol's Value Symbol's Name + Addend 0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 .text + d 0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1 foos.o: Relocation section '.rela.static_call_sites' at offset 0x430 contains 4 entries: Offset Info Type Symbol's Value Symbol's Name + Addend 0000000000000000 0000000100000002 R_X86_64_PC32 0000000000000000 .text + 0 0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1 0000000000000008 0000000100000002 R_X86_64_PC32 0000000000000000 .text + 1d 000000000000000c 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1 So we have two patch sites, one in the dead code of the weak foo and one in the real foo. All is well. *HOWEVER*, when the toolchain strips unused section symbols it generates things like this (using new enough binutils): foo-weak.o: Relocation section '.rela.static_call_sites' at offset 0x2c8 contains 1 entry: Offset Info Type Symbol's Value Symbol's Name + Addend 0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 foo + 0 0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1 foo.o: Relocation section '.rela.static_call_sites' at offset 0x310 contains 2 entries: Offset Info Type Symbol's Value Symbol's Name + Addend 0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 foo + d 0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1 foos.o: Relocation section '.rela.static_call_sites' at offset 0x430 contains 4 entries: Offset Info Type Symbol's Value Symbol's Name + Addend 0000000000000000 0000000100000002 R_X86_64_PC32 0000000000000000 foo + 0 0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1 0000000000000008 0000000100000002 R_X86_64_PC32 0000000000000000 foo + d 000000000000000c 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1 And now we can see how that foos.o .static_call_sites goes side-ways, we now have _two_ patch sites in foo. One for the weak symbol at foo+0 (which is no longer a static_call site!) and one at foo+d which is in fact the right location. This seems to happen when objtool cannot find a section symbol, in which case it falls back to any other symbol to key off of, however in this case that goes terribly wrong! As such, teach objtool to create a section symbol when there isn't one. Fixes: 44f6a7c0755d ("objtool: Fix seg fault with Clang non-section symbols") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20220419203807.655552918@infradead.org
2022-04-22objtool: Fix type of reloc::addendPeter Zijlstra3-7/+7
Elf{32,64}_Rela::r_addend is of type: Elf{32,64}_Sword, that means that our reloc::addend needs to be long or face tuncation issues when we do elf_rebuild_reloc_section(): - 107: 48 b8 00 00 00 00 00 00 00 00 movabs $0x0,%rax 109: R_X86_64_64 level4_kernel_pgt+0x80000067 + 107: 48 b8 00 00 00 00 00 00 00 00 movabs $0x0,%rax 109: R_X86_64_64 level4_kernel_pgt-0x7fffff99 Fixes: 627fce14809b ("objtool: Add ORC unwind table generation") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20220419203807.596871927@infradead.org
2022-04-19objtool: Fix function fallthrough detection for vmlinuxJosh Poimboeuf3-3/+2
Objtool's function fallthrough detection only works on C objects. The distinction between C and assembly objects no longer makes sense with objtool running on vmlinux.o. Now that copy_user_64.S has been fixed up, and an objtool sibling call detection bug has been fixed, the asm code is in "compliance" and this hack is no longer needed. Remove it. Fixes: ed53a0d97192 ("x86/alternative: Use .ibt_endbr_seal to seal indirect calls") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/b434cff98eca3a60dcc64c620d7d5d405a0f441c.1649718562.git.jpoimboe@redhat.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-13 10:01:57 +0300