summaryrefslogtreecommitdiff
path: root/tools/lib
AgeCommit message (Collapse)AuthorFilesLines
2018-04-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds4-46/+149
Pull networking updates from David Miller: 1) Support offloading wireless authentication to userspace via NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari. 2) A lot of work on network namespace setup/teardown from Kirill Tkhai. Setup and cleanup of namespaces now all run asynchronously and thus performance is significantly increased. 3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon Streiff. 4) Support zerocopy on RDS sockets, from Sowmini Varadhan. 5) Use denser instruction encoding in x86 eBPF JIT, from Daniel Borkmann. 6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime Chevallier. 7) Support grafting of child qdiscs in mlxsw driver, from Nogah Frankel. 8) Add packet forwarding tests to selftests, from Ido Schimmel. 9) Deal with sub-optimal GSO packets better in BBR congestion control, from Eric Dumazet. 10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern. 11) Add path MTU tests to selftests, from Stefano Brivio. 12) Various bits of IPSEC offloading support for mlx5, from Aviad Yehezkel, Yossi Kuperman, and Saeed Mahameed. 13) Support RSS spreading on ntuple filters in SFC driver, from Edward Cree. 14) Lots of sockmap work from John Fastabend. Applications can use eBPF to filter sendmsg and sendpage operations. 15) In-kernel receive TLS support, from Dave Watson. 16) Add XDP support to ixgbevf, this is significant because it should allow optimized XDP usage in various cloud environments. From Tony Nguyen. 17) Add new Intel E800 series "ice" ethernet driver, from Anirudh Venkataramanan et al. 18) IP fragmentation match offload support in nfp driver, from Pieter Jansen van Vuuren. 19) Support XDP redirect in i40e driver, from Björn Töpel. 20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of tracepoints in their raw form, from Alexei Starovoitov. 21) Lots of striding RQ improvements to mlx5 driver with many performance improvements, from Tariq Toukan. 22) Use rhashtable for inet frag reassembly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits) net: mvneta: improve suspend/resume net: mvneta: split rxq/txq init and txq deinit into SW and HW parts ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh net: bgmac: Fix endian access in bgmac_dma_tx_ring_free() net: bgmac: Correctly annotate register space route: check sysctl_fib_multipath_use_neigh earlier than hash fix typo in command value in drivers/net/phy/mdio-bitbang. sky2: Increase D3 delay to sky2 stops working after suspend net/mlx5e: Set EQE based as default TX interrupt moderation mode ibmvnic: Disable irqs before exiting reset from closed state net: sched: do not emit messages while holding spinlock vlan: also check phy_driver ts_info for vlan's real device Bluetooth: Mark expected switch fall-throughs Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME Bluetooth: btrsi: remove unused including <linux/version.h> Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4 sh_eth: kill useless check in __sh_eth_get_regs() sh_eth: add sh_eth_cpu_data::no_xdfar flag ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data() ipv4: factorize sk_wmem_alloc updates done by __ip_append_data() ...
2018-03-31selftests/bpf: Selftest for sys_connect hooksAndrey Ignatov1-0/+2
Add selftest for BPF_CGROUP_INET4_CONNECT and BPF_CGROUP_INET6_CONNECT attach types. Try to connect(2) to specified IP:port and test that: * remote IP:port pair is overridden; * local end of connection is bound to specified IP. All combinations of IPv4/IPv6 and TCP/UDP are tested. Example: # tcpdump -pn -i lo -w connect.pcap 2>/dev/null & [1] 478 # strace -qqf -e connect -o connect.trace ./test_sock_addr.sh Wait for testing IPv4/IPv6 to become available ... OK Load bind4 with invalid type (can pollute stderr) ... REJECTED Load bind4 with valid type ... OK Attach bind4 with invalid type ... REJECTED Attach bind4 with valid type ... OK Load connect4 with invalid type (can pollute stderr) libbpf: load bpf \ program failed: Permission denied libbpf: -- BEGIN DUMP LOG --- libbpf: 0: (b7) r2 = 23569 1: (63) *(u32 *)(r1 +24) = r2 2: (b7) r2 = 16777343 3: (63) *(u32 *)(r1 +4) = r2 invalid bpf_context access off=4 size=4 [ 1518.404609] random: crng init done libbpf: -- END LOG -- libbpf: failed to load program 'cgroup/connect4' libbpf: failed to load object './connect4_prog.o' ... REJECTED Load connect4 with valid type ... OK Attach connect4 with invalid type ... REJECTED Attach connect4 with valid type ... OK Test case #1 (IPv4/TCP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Requested: connect(192.168.1.254, 4040) from (*, *) .. Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56068) Test case #2 (IPv4/UDP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Requested: connect(192.168.1.254, 4040) from (*, *) .. Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56447) Load bind6 with invalid type (can pollute stderr) ... REJECTED Load bind6 with valid type ... OK Attach bind6 with invalid type ... REJECTED Attach bind6 with valid type ... OK Load connect6 with invalid type (can pollute stderr) libbpf: load bpf \ program failed: Permission denied libbpf: -- BEGIN DUMP LOG --- libbpf: 0: (b7) r6 = 0 1: (63) *(u32 *)(r1 +12) = r6 invalid bpf_context access off=12 size=4 libbpf: -- END LOG -- libbpf: failed to load program 'cgroup/connect6' libbpf: failed to load object './connect6_prog.o' ... REJECTED Load connect6 with valid type ... OK Attach connect6 with invalid type ... REJECTED Attach connect6 with valid type ... OK Test case #3 (IPv6/TCP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *) Actual: connect(::1, 6666) from (::6, 37458) Test case #4 (IPv6/UDP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *) Actual: connect(::1, 6666) from (::6, 39315) ### SUCCESS # egrep 'connect\(.*AF_INET' connect.trace | \ > egrep -vw 'htons\(1025\)' | fold -b -s -w 72 502 connect(7, {sa_family=AF_INET, sin_port=htons(4040), sin_addr=inet_addr("192.168.1.254")}, 128) = 0 502 connect(8, {sa_family=AF_INET, sin_port=htons(4040), sin_addr=inet_addr("192.168.1.254")}, 128) = 0 502 connect(9, {sa_family=AF_INET6, sin6_port=htons(6060), inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0 502 connect(10, {sa_family=AF_INET6, sin6_port=htons(6060), inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0 # fg tcpdump -pn -i lo -w connect.pcap 2> /dev/null # tcpdump -r connect.pcap -n tcp | cut -c 1-72 reading from file connect.pcap, link-type EN10MB (Ethernet) 17:57:40.383533 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [S], seq 1333 17:57:40.383566 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [S.], seq 112 17:57:40.383589 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [.], ack 1, w 17:57:40.384578 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [R.], seq 1, 17:57:40.403327 IP6 ::6.37458 > ::1.6666: Flags [S], seq 406513443, win 17:57:40.403357 IP6 ::1.6666 > ::6.37458: Flags [S.], seq 2448389240, ac 17:57:40.403376 IP6 ::6.37458 > ::1.6666: Flags [.], ack 1, win 342, opt 17:57:40.404263 IP6 ::1.6666 > ::6.37458: Flags [R.], seq 1, ack 1, win Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31selftests/bpf: Selftest for sys_bind hooksAndrey Ignatov1-0/+6
Add selftest to work with bpf_sock_addr context from `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` programs. Try to bind(2) on IP:port and apply: * loads to make sure context can be read correctly, including narrow loads (byte, half) for IP and full-size loads (word) for all fields; * stores to those fields allowed by verifier. All combination from IPv4/IPv6 and TCP/UDP are tested. Both scenarios are tested: * valid programs can be loaded and attached; * invalid programs can be neither loaded nor attached. Test passes when expected data can be read from context in the BPF-program, and after the call to bind(2) socket is bound to IP:port pair that was written by BPF-program to the context. Example: # ./test_sock_addr Attached bind4 program. Test case #1 (IPv4/TCP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Test case #2 (IPv4/UDP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Attached bind6 program. Test case #3 (IPv6/TCP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) Test case #4 (IPv6/UDP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) ### SUCCESS Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31libbpf: Support expected_attach_type at prog loadAndrey Ignatov4-46/+128
Support setting `expected_attach_type` at prog load time in both `bpf/bpf.h` and `bpf/libbpf.h`. Since both headers already have API to load programs, new functions are added not to break backward compatibility for existing ones: * `bpf_load_program_xattr()` is added to `bpf/bpf.h`; * `bpf_prog_load_xattr()` is added to `bpf/libbpf.h`. Both new functions accept structures, `struct bpf_load_program_attr` and `struct bpf_prog_load_attr` correspondingly, where new fields can be added in the future w/o changing the API. Standard `_xattr` suffix is used to name the new API functions. Since `bpf_load_program_name()` is not used as heavily as `bpf_load_program()`, it was removed in favor of more generic `bpf_load_program_xattr()`. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-28libbpf: add bpf_raw_tracepoint_open helperAlexei Starovoitov2-0/+12
add bpf_raw_tracepoint_open(const char *name, int prog_fd) api to libbpf Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-19bpf: sockmap sample, add option to attach SK_MSG programJohn Fastabend1-0/+1
Add sockmap option to use SK_MSG program types. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-19objtool, perf: Fix GCC 8 -Wrestrict errorJosh Poimboeuf1-1/+1
Starting with recent GCC 8 builds, objtool and perf fail to build with the following error: ../str_error_r.c: In function ‘str_error_r’: ../str_error_r.c:25:3: error: passing argument 1 to restrict-qualified parameter aliases with argument 5 [-Werror=restrict] snprintf(buf, buflen, "INTERNAL ERROR: strerror_r(%d, %p, %zd)=%d", errnum, buf, buflen, err); The code seems harmless, but there's probably no benefit in printing the 'buf' pointer in this situation anyway, so just remove it to make GCC happy. Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Laura Abbott <labbott@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20180316031154.juk2uncs7baffctp@treble Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-06Merge tag 'v4.16-rc4' into perf/core, to pick up fixesIngo Molnar1-2/+3
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-20tools/libbpf: Avoid possibly using uninitialized variableJeremy Cline1-2/+3
Fixes a GCC maybe-uninitialized warning introduced by 48cca7e44f9f. "text" is only initialized inside the if statement so only print debug info there. Fixes: 48cca7e44f9f ("libbpf: add support for bpf_call") Signed-off-by: Jeremy Cline <jeremy@jcline.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-16tools lib symbol: Skip non-address kallsyms lineJiri Olsa1-0/+4
Adding check on failed attempt to parse the address and skip the line parsing early in that case. The address can be replaced with '(null)' string in case user don't have enough permissions, like: $ cat /proc/kallsyms (null) A irq_stack_union (null) A __per_cpu_start ... Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180215122635.24029-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-16tools lib api fs: Add sysfs__read_xll functionJiri Olsa2-2/+14
Adding sysfs__read_xll function to be able to read sysfs files with hex numbers in, which do not have 0x prefix. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180206181813.10943-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-16tools lib api fs: Add filename__read_xll functionJiri Olsa2-7/+23
Adding filename__read_xll function to be able to read files with hex numbers in, which do not have 0x prefix. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180206181813.10943-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-12/+44
Daniel Borkmann says: ==================== pull-request: bpf 2018-02-09 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Two fixes for BPF sockmap in order to break up circular map references from programs attached to sockmap, and detaching related sockets in case of socket close() event. For the latter we get rid of the smap_state_change() and plug into ULP infrastructure, which will later also be used for additional features anyway such as TX hooks. For the second issue, dependency chain is broken up via map release callback to free parse/verdict programs, all from John. 2) Fix a libbpf relocation issue that was found while implementing XDP support for Suricata project. Issue was that when clang was invoked with default target instead of bpf target, then various other e.g. debugging relevant sections are added to the ELF file that contained relocation entries pointing to non-BPF related sections which libbpf trips over instead of skipping them. Test cases for libbpf are added as well, from Jesper. 3) Various misc fixes for bpftool and one for libbpf: a small addition to libbpf to make sure it recognizes all standard section prefixes. Then, the Makefile in bpftool/Documentation is improved to explicitly check for rst2man being installed on the system as we otherwise risk installing empty man pages; the man page for bpftool-map is corrected and a set of missing bash completions added in order to avoid shipping bpftool where the completions are only partially working, from Quentin. 4) Fix applying the relocation to immediate load instructions in the nfp JIT which were missing a shift, from Jakub. 5) Two fixes for the BPF kernel selftests: handle CONFIG_BPF_JIT_ALWAYS_ON=y gracefully in test_bpf.ko module and mark them as FLAG_EXPECTED_FAIL in this case; and explicitly delete the veth devices in the two tests test_xdp_{meta,redirect}.sh before dismantling the netnses as when selftests are run in batch mode, then workqueue to handle destruction might not have finished yet and thus veth creation in next test under same dev name would fail, from Yonghong. 6) Fix test_kmod.sh to check the test_bpf.ko module path before performing an insmod, and fallback to modprobe. Especially the latter is useful when having a device under test that has the modules installed instead, from Naresh. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09tools/libbpf: handle issues with bpf ELF objects containing .eh_framesJesper Dangaard Brouer1-0/+26
V3: More generic skipping of relo-section (suggested by Daniel) If clang >= 4.0.1 is missing the option '-target bpf', it will cause llc/llvm to create two ELF sections for "Exception Frames", with section names '.eh_frame' and '.rel.eh_frame'. The BPF ELF loader library libbpf fails when loading files with these sections. The other in-kernel BPF ELF loader in samples/bpf/bpf_load.c, handle this gracefully. And iproute2 loader also seems to work with these "eh" sections. The issue in libbpf is caused by bpf_object__elf_collect() skipping some sections, and later when performing relocation it will be pointing to a skipped section, as these sections cannot be found by bpf_object__find_prog_by_idx() in bpf_object__collect_reloc(). This is a general issue that also occurs for other sections, like debug sections which are also skipped and can have relo section. As suggested by Daniel. To avoid keeping state about all skipped sections, instead perform a direct qlookup in the ELF object. Lookup the section that the relo-section points to and check if it contains executable machine instructions (denoted by the sh_flags SHF_EXECINSTR). Use this check to also skip irrelevant relo-sections. Note, for samples/bpf/ the '-target bpf' parameter to clang cannot be used due to incompatibility with asm embedded headers, that some of the samples include. This is explained in more details by Yonghong Song in bpf_devel_QA. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-09tools/libbpf: improve the pr_debug statements to contain section numbersJesper Dangaard Brouer1-12/+13
While debugging a bpf ELF loading issue, I needed to correlate the ELF section number with the failed relocation section reference. Thus, add section numbers/index to the pr_debug. In debug mode, also print section that were skipped. This helped me identify that a section (.eh_frame) was skipped, and this was the reason the relocation section (.rel.eh_frame) could not find that section number. The section numbers corresponds to the readelf tools Section Headers [Nr]. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-08libbpf: complete list of strings for guessing program typeQuentin Monnet1-0/+5
It seems that the type guessing feature for libbpf, based on the name of the ELF section the program is located in, was inspired from samples/bpf/prog_load.c, which was not used by any sample for loading programs of certain types such as TC actions and classifiers, or LWT-related types. As a consequence, libbpf is not able to guess the type of such programs and to load them automatically if type is not provided to the `bpf_load_prog()` function. Add ELF section names associated to those eBPF program types so that they can be loaded with e.g. bpftool as well. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-11/+33
Merge misc updates from Andrew Morton: - kasan updates - procfs - lib/bitmap updates - other lib/ updates - checkpatch tweaks - rapidio - ubsan - pipe fixes and cleanups - lots of other misc bits * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits) Documentation/sysctl/user.txt: fix typo MAINTAINERS: update ARM/QUALCOMM SUPPORT patterns MAINTAINERS: update various PALM patterns MAINTAINERS: update "ARM/OXNAS platform support" patterns MAINTAINERS: update Cortina/Gemini patterns MAINTAINERS: remove ARM/CLKDEV SUPPORT file pattern MAINTAINERS: remove ANDROID ION pattern mm: docs: add blank lines to silence sphinx "Unexpected indentation" errors mm: docs: fix parameter names mismatch mm: docs: fixup punctuation pipe: read buffer limits atomically pipe: simplify round_pipe_size() pipe: reject F_SETPIPE_SZ with size over UINT_MAX pipe: fix off-by-one error when checking buffer limits pipe: actually allow root to exceed the pipe buffer limits pipe, sysctl: remove pipe_proc_fn() pipe, sysctl: drop 'min' parameter from pipe-max-size converter kasan: rework Kconfig settings crash_dump: is_kdump_kernel can be boolean kernel/mutex: mutex_is_locked can be boolean ...
2018-02-07lib: optimize cpumask_next_and()Clement Courbet1-10/+29
We've measured that we spend ~0.6% of sys cpu time in cpumask_next_and(). It's essentially a joined iteration in search for a non-zero bit, which is currently implemented as a lookup join (find a nonzero bit on the lhs, lookup the rhs to see if it's set there). Implement a direct join (find a nonzero bit on the incrementally built join). Also add generic bitmap benchmarks in the new `test_find_bit` module for new function (see `find_next_and_bit` in [2] and [3] below). For cpumask_next_and, direct benchmarking shows that it's 1.17x to 14x faster with a geometric mean of 2.1 on 32 CPUs [1]. No impact on memory usage. Note that on Arm, the new pure-C implementation still outperforms the old one that uses a mix of C and asm (`find_next_bit`) [3]. [1] Approximate benchmark code: ``` unsigned long src1p[nr_cpumask_longs] = {pattern1}; unsigned long src2p[nr_cpumask_longs] = {pattern2}; for (/*a bunch of repetitions*/) { for (int n = -1; n <= nr_cpu_ids; ++n) { asm volatile("" : "+rm"(src1p)); // prevent any optimization asm volatile("" : "+rm"(src2p)); unsigned long result = cpumask_next_and(n, src1p, src2p); asm volatile("" : "+rm"(result)); } } ``` Results: pattern1 pattern2 time_before/time_after 0x0000ffff 0x0000ffff 1.65 0x0000ffff 0x00005555 2.24 0x0000ffff 0x00001111 2.94 0x0000ffff 0x00000000 14.0 0x00005555 0x0000ffff 1.67 0x00005555 0x00005555 1.71 0x00005555 0x00001111 1.90 0x00005555 0x00000000 6.58 0x00001111 0x0000ffff 1.46 0x00001111 0x00005555 1.49 0x00001111 0x00001111 1.45 0x00001111 0x00000000 3.10 0x00000000 0x0000ffff 1.18 0x00000000 0x00005555 1.18 0x00000000 0x00001111 1.17 0x00000000 0x00000000 1.25 ----------------------------- geo.mean 2.06 [2] test_find_next_bit, X86 (skylake) [ 3913.477422] Start testing find_bit() with random-filled bitmap [ 3913.477847] find_next_bit: 160868 cycles, 16484 iterations [ 3913.477933] find_next_zero_bit: 169542 cycles, 16285 iterations [ 3913.478036] find_last_bit: 201638 cycles, 16483 iterations [ 3913.480214] find_first_bit: 4353244 cycles, 16484 iterations [ 3913.480216] Start testing find_next_and_bit() with random-filled bitmap [ 3913.481074] find_next_and_bit: 89604 cycles, 8216 iterations [ 3913.481075] Start testing find_bit() with sparse bitmap [ 3913.481078] find_next_bit: 2536 cycles, 66 iterations [ 3913.481252] find_next_zero_bit: 344404 cycles, 32703 iterations [ 3913.481255] find_last_bit: 2006 cycles, 66 iterations [ 3913.481265] find_first_bit: 17488 cycles, 66 iterations [ 3913.481266] Start testing find_next_and_bit() with sparse bitmap [ 3913.481272] find_next_and_bit: 764 cycles, 1 iterations [3] test_find_next_bit, arm (v7 odroid XU3). [ 267.206928] Start testing find_bit() with random-filled bitmap [ 267.214752] find_next_bit: 4474 cycles, 16419 iterations [ 267.221850] find_next_zero_bit: 5976 cycles, 16350 iterations [ 267.229294] find_last_bit: 4209 cycles, 16419 iterations [ 267.279131] find_first_bit: 1032991 cycles, 16420 iterations [ 267.286265] Start testing find_next_and_bit() with random-filled bitmap [ 267.302386] find_next_and_bit: 2290 cycles, 8140 iterations [ 267.309422] Start testing find_bit() with sparse bitmap [ 267.316054] find_next_bit: 191 cycles, 66 iterations [ 267.322726] find_next_zero_bit: 8758 cycles, 32703 iterations [ 267.329803] find_last_bit: 84 cycles, 66 iterations [ 267.336169] find_first_bit: 4118 cycles, 66 iterations [ 267.342627] Start testing find_next_and_bit() with sparse bitmap [ 267.356919] find_next_and_bit: 91 cycles, 1 iterations [courbet@google.com: v6] Link: http://lkml.kernel.org/r/20171129095715.23430-1-courbet@google.com [geert@linux-m68k.org: m68k/bitops: always include <asm-generic/bitops/find.h>] Link: http://lkml.kernel.org/r/1512556816-28627-1-git-send-email-geert@linux-m68k.org Link: http://lkml.kernel.org/r/20171128131334.23491-1-courbet@google.com Signed-off-by: Clement Courbet <courbet@google.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yury Norov <ynorov@caviumnetworks.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-07tools/lib/subcmd/pager.c: do not alias select() paramsSergey Senozhatsky1-1/+4
Use a separate fd set for select()-s exception fds param to fix the following gcc warning: pager.c:36:12: error: passing argument 2 to restrict-qualified parameter aliases with argument 4 [-Werror=restrict] select(1, &in, NULL, &in, NULL); ^~~ ~~~ Link: http://lkml.kernel.org/r/20180101105626.7168-1-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-03libbpf: add missing SPDX-License-IdentifierEric Leblond4-0/+8
Signed-off-by: Eric Leblond <eric@regit.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-03libbpf: add error reporting in XDPEric Leblond4-1/+271
Parse netlink ext attribute to get the error message returned by the card. Code is partially take from libnl. We add netlink.h to the uapi include of tools. And we need to avoid include of userspace netlink header to have a successful build of sample so nlattr.h has a define to avoid the inclusion. Using a direct define could have been an issue as NLMSGERR_ATTR_MAX can change in the future. We also define SOL_NETLINK if not defined to avoid to have to copy socket.h for a fixed value. Signed-off-by: Eric Leblond <eric@regit.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-03libbpf: add function to setup XDPEric Leblond3-0/+128
Most of the code is taken from set_link_xdp_fd() in bpf_load.c and slightly modified to be library compliant. Signed-off-by: Eric Leblond <eric@regit.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-03tools: add netlink.h and if_link.h in tools uapiEric Leblond1-0/+6
The headers are necessary for libbpf compilation on system with older version of the headers. Signed-off-by: Eric Leblond <eric@regit.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds3-49/+177
Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...
2018-01-17tools lib traceevent: Fix get_field_str() for dynamic stringsSteven Rostedt (VMware)1-1/+9
If a field is a dynamic string, get_field_str() returned just the offset/size value and not the string. Have it parse the offset/size correctly to return the actual string. Otherwise filtering fails when trying to filter fields that are dynamic strings. Reported-by: Gopanapalli Pradeep <prap_hai@yahoo.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20180112004823.146333275@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17tools lib traceevent: Fix missing break in FALSE case of ↵Taeung Song1-0/+1
pevent_filter_clear_trivial() Currently the FILTER_TRIVIAL_FALSE case has a missing break statement, if the trivial type is FALSE, it will also run into the TRUE case, and always be skipped as the TRUE statement will continue the loop on the inverse condition of the FALSE statement. Reported-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20180112004823.012918807@goodmis.org Link: http://lkml.kernel.org/r/1493218540-12296-1-git-send-email-treeze.taeung@gmail.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17tools lib traceevent: Add UL suffix to MISSING_EVENTSMichael Sartain1-2/+2
Add UL suffix to MISSING_EVENTS since ints shouldn't be left shifted by 31. Signed-off-by: Michael Sartain <mikesart@fastmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20171016165542.13038-4-mikesart@fastmail.com Link: http://lkml.kernel.org/r/20180112004822.829533885@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17tools lib traceevent: Use asprintf when possibleFederico Vaga2-22/+13
It makes the code clearer and less error prone. clearer: - less code - the code is now using the same format to create strings dynamically less error prone: - no magic number +2 +9 +5 to compute the size - no copy&paste of the strings to compute the size and to concatenate The function `asprintf` is not POSIX standard but the program was already using it. Later it can be decided to use only POSIX functions, then we can easly replace all the `asprintf(3)` with a local implementation of that function. Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Federico Vaga <federico.vaga@vaga.pv.it> Link: http://lkml.kernel.org/r/20170802221558.9684-2-federico.vaga@vaga.pv.it Link: http://lkml.kernel.org/r/20180112004822.686281649@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17tools lib traceevent: Show contents (in hex) of data of unrecognized type ↵Steven Rostedt (VMware)1-2/+8
records When a record has an unrecognized type, an error message is reported, but it would also be helpful to see the contents of that record. At least show what it is in hex, instead of just showing a blank line. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20180112004822.542204577@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17tools lib traceevent: Handle new pointer processing of bprint stringsSteven Rostedt (VMware)1-0/+26
The Linux kernel printf() has some extended use cases that dereference the pointer. This is dangerouse for tracing because the pointer that is dereferenced can change or even be unmapped. It also causes issues when the trace data is extracted, because user space does not have access to the contents of the pointer even if it still exists. To handle this, the kernel was updated to process these dereferenced pointers at the time they are recorded, and not post processed. Now they exist in the tracing buffer, and no dereference is needed at the time of reading the trace. The event parsing library needs to handle this new case. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20180112004822.403349289@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17tools lib traceevent: Simplify pointer print logic and fix %pFSteven Rostedt (VMware)1-8/+9
When processing %pX in pretty_print(), simplify the logic slightly by incrementing the ptr to the format string if isalnum(ptr[1]) is true. This follows the logic a bit more closely to what is in the kernel. Also, this fixes a small bug where %pF was not giving the offset of the function. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20180112004822.260262257@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17tools lib traceevent: Print value of unknown symbolic fieldsJan Kiszka1-0/+2
Aligns trace-cmd with the behavior of the kernel. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/e60c889f-55e7-4ee8-0e50-151e435ffd8c@siemens.com Link: http://lkml.kernel.org/r/20180112004822.118332436@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17tools lib traceevent: Show value of flags that have not been parsedSteven Rostedt (VMware)1-0/+5
If the value contains bits that are not defined by print_flags() helper, then show the remaining bits. This aligns with the functionality of the kernel. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/e60c889f-55e7-4ee8-0e50-151e435ffd8c@siemens.com Link: http://lkml.kernel.org/r/20180112004821.976225232@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17tools lib traceevent: Fix bad force_token escape sequenceMichael Sartain1-1/+1
Older kernels have a bug that creates invalid symbols. event-parse.c handles them by replacing them with a "%s" token. But the fix included an extra backslash, and "\%s" was added incorrectly. Signed-off-by: Michael Sartain <mikesart@fastmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20180112004821.827168881@goodmis.org Link: http://lkml.kernel.org/r/d320000d37c10ce0912851e1fb78d1e0c946bcd9.1497486273.git.mikesart@fastmail.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17libbpf: Makefile set specified permission modeJesper Dangaard Brouer1-1/+1
The third parameter to do_install was not used by $(INSTALL) command. Fix this by only setting the -m option when the third parameter is supplied. The use of a third parameter was introduced in commit eb54e522a000 ("bpf: install libbpf headers on 'make install'"). Without this change, the header files are install as executables files (755). Fixes: eb54e522a000 ("bpf: install libbpf headers on 'make install'") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-17libbpf: cleanup Makefile, remove unused elementsJesper Dangaard Brouer1-13/+2
The plugin_dir_SQ variable is not used, remove it. The function update_dir is also unused, remove it. The variable $VERSION_FILES is empty, remove it. These all originates from the introduction of the Makefile, and is likely a copy paste from tools/lib/traceevent/Makefile. Fixes: 1b76c13e4b36 ("bpf tools: Introduce 'bpf' library and add bpf feature check") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-17libbpf: install the header file libbpf.hJesper Dangaard Brouer1-1/+2
It seems like an oversight not to install the header file for libbpf, given the libbpf.so + libbpf.a files are installed. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-17libbpf: fix string comparison for guessing eBPF program typeQuentin Monnet1-1/+1
libbpf is able to deduce the type of a program from the name of the ELF section in which it is located. However, the comparison is made on the first n characters, n being determined with sizeof() applied to the reference string (e.g. "xdp"). When such section names are supposed to receive a suffix separated with a slash (e.g. "kprobe/"), using sizeof() takes the final NUL character of the reference string into account, which implies that both strings must be equal. Instead, the desired behaviour would consist in taking the length of the string, *without* accounting for the ending NUL character, and to make sure the reference string is a prefix to the ELF section name. Subtract 1 to the total size of the string for obtaining the length for the comparison. Fixes: 583c90097f72 ("libbpf: add ability to guess program type based on section name") Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-20libbpf: Fix build errors.David Miller1-2/+3
These elf object pieces are of type Elf64_Xword and therefore could be "long long" on some builds. Cast to "long long" and use printf format %lld to deal with this since we are building with -Werror=format. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-17libbpf: fix Makefile exit code if libelf not foundJakub Kicinski1-2/+2
/bin/sh's exit does not recognize -1 as a number, leading to the following error message: /bin/sh: 1: exit: Illegal number: -1 Use 1 as the exit code. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-17libbpf: add support for bpf_callAlexei Starovoitov2-44/+128
- recognize relocation emitted by llvm - since all regular function will be kept in .text section and llvm takes care of pc-relative offsets in bpf_call instruction simply copy all of .text to relevant program section while adjusting bpf_call instructions in program section to point to newly copied body of instructions from .text - do so for all programs in the elf file - set all programs types to the one passed to bpf_prog_load() Note for elf files with multiple programs that use different functions in .text section we need to do 'linker' style logic. This work is still TBD Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-14libbpf: prefer global symbols as bpf program name sourceRoman Gushchin1-0/+2
Libbpf picks the name of the first symbol in the corresponding elf section to use as a program name. But without taking symbol's scope into account it may end's up with some local label as a program name. E.g.: $ bpftool prog 1: type 15 name LBB0_10 tag 0390a5136ba23f5c loaded_at Dec 07/17:22 uid 0 xlated 456B not jited memlock 4096B Fix this by preferring global symbols as program name. For instance: $ bpftool prog 1: type 15 name bpf_prog1 tag 0390a5136ba23f5c loaded_at Dec 07/17:26 uid 0 xlated 456B not jited memlock 4096B Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Quentin Monnet <quentin.monnet@netronome.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-14libbpf: add ability to guess program type based on section nameRoman Gushchin1-0/+51
The bpf_prog_load() function will guess program type if it's not specified explicitly. This functionality will be used to implement loading of different programs without asking a user to specify the program type. In first order it will be used by bpftool. Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Quentin Monnet <quentin.monnet@netronome.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-18tools/lib/traceevent/parse-filter.c: clean up clang build warningCheng Jian1-3/+3
The uniform structure filter_arg sets its union based on the difference of enum filter_arg_type, However, some functions use implicit type conversion obviously. warning: implicit conversion from enumeration type 'enum filter_exp_type' to different enumeration type 'enum filter_op_type' warning: implicit conversion from enumeration type 'enum filter_cmp_type' to different enumeration type 'enum filter_exp_type' Link: http://lkml.kernel.org/r/1509938415-113825-1-git-send-email-cj.chengjian@huawei.com Signed-off-by: Cheng Jian <cj.chengjian@huawei.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Xie XiuQi <xiexiuqi@huawei.com> Cc: Li Bin <huawei.libin@huawei.com> Cc: Steven Rostedt (Red Hat) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller58-0/+58
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman58-0/+58
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-06libbpf: use map_flags when creating mapsCraig Gallek2-1/+2
This is required to use BPF_MAP_TYPE_LPM_TRIE or any other map type which requires flags. Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-06libbpf: parse maps sections of varying sizeCraig Gallek1-29/+41
This library previously assumed a fixed-size map options structure. Any new options were ignored. In order to allow the options structure to grow and to support parsing older programs, this patch updates the maps section parsing to handle varying sizes. Object files with maps sections smaller than expected will have the new fields initialized to zero. Object files which have larger than expected maps sections will be rejected unless all of the unrecognized data is zero. This change still assumes that each map definition in the maps section is the same size. Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05libbpf: add support for BPF_PROG_QUERYAlexei Starovoitov2-1/+22
add support for BPF_PROG_QUERY command to libbpf Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05libbpf: introduce bpf_prog_detach2()Alexei Starovoitov2-0/+13
introduce bpf_prog_detach2() that takes one more argument prog_fd vs bpf_prog_detach() that takes only attach_fd and type. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-26 04:24:31 +0300