| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Range is 0-7, not 0-9, otherwise parser silently excludes it from the
strtol() rather than throwing an error.
Reported-by: Marc Boschma <marc@boschma.cx>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support for recently added BPF_CGROUP_UDP4_SENDMSG and
BPF_CGROUP_UDP6_SENDMSG attach types to bpftool, update documentation
and bash completion.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This is simple test over rc-loopback.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The new command "bpftool perf [show | list]" will traverse
all processes under /proc, and if any fd is associated
with a perf event, it will print out related perf event
information. Documentation is also added.
Below is an example to show the results using bcc commands.
Running the following 4 bcc commands:
kprobe: trace.py '__x64_sys_nanosleep'
kretprobe: trace.py 'r::__x64_sys_nanosleep'
tracepoint: trace.py 't:syscalls:sys_enter_nanosleep'
uprobe: trace.py 'p:/home/yhs/a.out:main'
The bpftool command line and result:
$ bpftool perf
pid 21711 fd 5: prog_id 5 kprobe func __x64_sys_write offset 0
pid 21765 fd 5: prog_id 7 kretprobe func __x64_sys_nanosleep offset 0
pid 21767 fd 5: prog_id 8 tracepoint sys_enter_nanosleep
pid 21800 fd 5: prog_id 9 uprobe filename /home/yhs/a.out offset 1159
$ bpftool -j perf
[{"pid":21711,"fd":5,"prog_id":5,"fd_type":"kprobe","func":"__x64_sys_write","offset":0}, \
{"pid":21765,"fd":5,"prog_id":7,"fd_type":"kretprobe","func":"__x64_sys_nanosleep","offset":0}, \
{"pid":21767,"fd":5,"prog_id":8,"fd_type":"tracepoint","tracepoint":"sys_enter_nanosleep"}, \
{"pid":21800,"fd":5,"prog_id":9,"fd_type":"uprobe","filename":"/home/yhs/a.out","offset":1159}]
$ bpftool prog
5: kprobe name probe___x64_sys tag e495a0c82f2c7a8d gpl
loaded_at 2018-05-15T04:46:37-0700 uid 0
xlated 200B not jited memlock 4096B map_ids 4
7: kprobe name probe___x64_sys tag f2fdee479a503abf gpl
loaded_at 2018-05-15T04:48:32-0700 uid 0
xlated 200B not jited memlock 4096B map_ids 7
8: tracepoint name tracepoint__sys tag 5390badef2395fcf gpl
loaded_at 2018-05-15T04:48:48-0700 uid 0
xlated 200B not jited memlock 4096B map_ids 8
9: kprobe name probe_main_1 tag 0a87bdc2e2953b6d gpl
loaded_at 2018-05-15T04:49:52-0700 uid 0
xlated 200B not jited memlock 4096B map_ids 9
$ ps ax | grep "python ./trace.py"
21711 pts/0 T 0:03 python ./trace.py __x64_sys_write
21765 pts/0 S+ 0:00 python ./trace.py r::__x64_sys_nanosleep
21767 pts/2 S+ 0:00 python ./trace.py t:syscalls:sys_enter_nanosleep
21800 pts/3 S+ 0:00 python ./trace.py p:/home/yhs/a.out:main
22374 pts/1 S+ 0:00 grep --color=auto python ./trace.py
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This splits up the contiguous JITed dump obtained via the bpf
system call into more relatable chunks for each function in
the program. If the kernel symbols corresponding to these are
known, they are printed in the header for each JIT image dump
otherwise the masked start address is printed.
Before applying this patch:
# bpftool prog dump jited id 1
0: push %rbp
1: mov %rsp,%rbp
...
70: leaveq
71: retq
72: push %rbp
73: mov %rsp,%rbp
...
dd: leaveq
de: retq
# bpftool -p prog dump jited id 1
[{
"pc": "0x0",
"operation": "push",
"operands": ["%rbp"
]
},{
...
},{
"pc": "0x71",
"operation": "retq",
"operands": [null
]
},{
"pc": "0x72",
"operation": "push",
"operands": ["%rbp"
]
},{
...
},{
"pc": "0xde",
"operation": "retq",
"operands": [null
]
}
]
After applying this patch:
# echo 0 > /proc/sys/net/core/bpf_jit_kallsyms
# bpftool prog dump jited id 1
0xffffffffc02c7000:
0: push %rbp
1: mov %rsp,%rbp
...
70: leaveq
71: retq
0xffffffffc02cf000:
0: push %rbp
1: mov %rsp,%rbp
...
6b: leaveq
6c: retq
# bpftool -p prog dump jited id 1
[{
"name": "0xffffffffc02c7000",
"insns": [{
"pc": "0x0",
"operation": "push",
"operands": ["%rbp"
]
},{
...
},{
"pc": "0x71",
"operation": "retq",
"operands": [null
]
}
]
},{
"name": "0xffffffffc02cf000",
"insns": [{
"pc": "0x0",
"operation": "push",
"operands": ["%rbp"
]
},{
...
},{
"pc": "0x6c",
"operation": "retq",
"operands": [null
]
}
]
}
]
# echo 1 > /proc/sys/net/core/bpf_jit_kallsyms
# bpftool prog dump jited id 1
bpf_prog_b811aab41a39ad3d_foo:
0: push %rbp
1: mov %rsp,%rbp
...
70: leaveq
71: retq
bpf_prog_cf418ac8b67bebd9_F:
0: push %rbp
1: mov %rsp,%rbp
...
6b: leaveq
6c: retq
# bpftool -p prog dump jited id 1
[{
"name": "bpf_prog_b811aab41a39ad3d_foo",
"insns": [{
"pc": "0x0",
"operation": "push",
"operands": ["%rbp"
]
},{
...
},{
"pc": "0x71",
"operation": "retq",
"operands": [null
]
}
]
},{
"name": "bpf_prog_cf418ac8b67bebd9_F",
"insns": [{
"pc": "0x0",
"operation": "push",
"operands": ["%rbp"
]
},{
...
},{
"pc": "0x6c",
"operation": "retq",
"operands": [null
]
}
]
}
]
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Currently, we resolve the callee's address for a JITed function
call by using the imm field of the call instruction as an offset
from __bpf_call_base. If bpf_jit_kallsyms is enabled, we further
use this address to get the callee's kernel symbol's name.
For some architectures, such as powerpc64, the imm field is not
large enough to hold this offset. So, instead of assigning this
offset to the imm field, the verifier now assigns the subprog
id. Also, a list of kernel symbol addresses for all the JITed
functions is provided in the program info. We now use the imm
field as an index for this list to lookup a callee's symbol's
address and resolve its name.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This adds the SOCKHASH map type to bpftools so that we get correct
pretty printing.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
There are two copies of event reading loop - in bpftool and
trace_helpers "library". Consolidate them and move the code
to libbpf. Return codes from trace_helpers are kept, but
renamed to include LIBBPF prefix.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Ask the kernel to include sample time in each even instead of
reading the clock. This is also more accurate because our
clock reading was done when user space would dump the buffer,
not when sample was produced.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Update .gitignore files.
Signed-off-by: Sirio Balmelli <sirio@b-ad.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Minor conflict, a CHECK was placed into an if() statement
in net-next, whilst a newline was added to that CHECK
call in 'net'. Thanks to Daniel for the merge resolution.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Users of BPF sooner or later discover perf_event_output() helpers
and BPF_MAP_TYPE_PERF_EVENT_ARRAY. Dumping this array type is
not possible, however, we can add simple reading of perf events.
Create a new event_pipe subcommand for maps, this sub command
will only work with BPF_MAP_TYPE_PERF_EVENT_ARRAY maps.
Parts of the code from samples/bpf/trace_output_user.c.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Move the get_possible_cpus() function to shared code. No functional
changes.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Instead of spelling [hex] BYTES everywhere use DATA as keyword
for generalized value. This will help us keep the messages
concise when longer command are added in the future. It will
also be useful once BTF support comes. We will only have to
change the definition of DATA.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Overlapping changes in selftests Makefile.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To make eBPF program load time easier to parse from "bpftool prog"
output for machines, change the time format used by the program. The
format now differs for plain and JSON version:
- Plain version uses a string formatted according to ISO 8601.
- JSON uses the number of seconds since the Epoch, wich is less friendly
for humans but even easier to process.
Example output:
# ./bpftool prog
41298: xdp tag a04f5eef06a7f555 dev foo
loaded_at 2018-04-18T17:19:47+0100 uid 0
xlated 16B not jited memlock 4096B
# ./bpftool prog -p
[{
"id": 41298,
"type": "xdp",
"tag": "a04f5eef06a7f555",
"gpl_compatible": false,
"dev": {
"ifindex": 14,
"ns_dev": 3,
"ns_inode": 4026531993,
"ifname": "foo"
},
"loaded_at": 1524068387,
"uid": 0,
"bytes_xlated": 16,
"jited": false,
"bytes_memlock": 4096
}
]
Previously, "Apr 18/17:19" would be used at both places.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-04-27
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add extensive BPF helper description into include/uapi/linux/bpf.h
and a new script bpf_helpers_doc.py which allows for generating a
man page out of it. Thus, every helper in BPF now comes with proper
function signature, detailed description and return code explanation,
from Quentin.
2) Migrate the BPF collect metadata tunnel tests from BPF samples over
to the BPF selftests and further extend them with v6 vxlan, geneve
and ipip tests, simplify the ipip tests, improve documentation and
convert to bpf_ntoh*() / bpf_hton*() api, from William.
3) Currently, helpers that expect ARG_PTR_TO_MAP_{KEY,VALUE} can only
access stack and packet memory. Extend this to allow such helpers
to also use map values, which enabled use cases where value from
a first lookup can be directly used as a key for a second lookup,
from Paul.
4) Add a new helper bpf_skb_get_xfrm_state() for tc BPF programs in
order to retrieve XFRM state information containing SPI, peer
address and reqid values, from Eyal.
5) Various optimizations in nfp driver's BPF JIT in order to turn ADD
and SUB instructions with negative immediate into the opposite
operation with a positive immediate such that nfp can better fit
small immediates into instructions. Savings in instruction count
up to 4% have been observed, from Jakub.
6) Add the BPF prog's gpl_compatible flag to struct bpf_prog_info
and add support for dumping this through bpftool, from Jiri.
7) Move the BPF sockmap samples over into BPF selftests instead since
sockmap was rather a series of tests than sample anyway and this way
this can be run from automated bots, from John.
8) Follow-up fix for bpf_adjust_tail() helper in order to make it work
with generic XDP, from Nikita.
9) Some follow-up cleanups to BTF, namely, removing unused defines from
BTF uapi header and renaming 'name' struct btf_* members into name_off
to make it more clear they are offsets into string section, from Martin.
10) Remove test_sock_addr from TEST_GEN_PROGS in BPF selftests since
not run directly but invoked from test_sock_addr.sh, from Yonghong.
11) Remove redundant ret assignment in sample BPF loader, from Wang.
12) Add couple of missing files to BPF selftest's gitignore, from Anders.
There are two trivial merge conflicts while pulling:
1) Remove samples/sockmap/Makefile since all sockmap tests have been
moved to selftests.
2) Add both hunks from tools/testing/selftests/bpf/.gitignore to the
file since git should ignore all of them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Display the license "gpl" string in bpftool prog command, like:
# bpftool prog list
5: tracepoint name func tag 57cd311f2e27366b gpl
loaded_at Apr 26/09:37 uid 0
xlated 16B not jited memlock 4096B
# bpftool --json --pretty prog show
[{
"id": 5,
"type": "tracepoint",
"name": "func",
"tag": "57cd311f2e27366b",
"gpl_compatible": true,
"loaded_at": "Apr 26/09:37",
"uid": 0,
"bytes_xlated": 16,
"jited": false,
"bytes_memlock": 4096
}
]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Here the variable cont is used as the saved_pointer for a call to
strtok_r(). It is safe to use the value uninitialized in this
context however and the later reference is only ever used if
the strtok_r is successful. But, 'gcc-5' at least doesn't have all
this knowledge so initialize cont to NULL. Additionally, do the
natural NULL check before accessing just for completness.
The warning is the following:
./bpf/tools/bpf/bpf_dbg.c: In function ‘cmd_load’:
./bpf/tools/bpf/bpf_dbg.c:1077:13: warning: ‘cont’ may be used uninitialized in this function [-Wmaybe-uninitialized]
} else if (matches(subcmd, "pcap") == 0) {
Fixes: fd981e3c321a "filter: bpf_dbg: add minimal bpf debugger"
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Merging net into net-next to help the bpf folks avoid
some really ugly merge conflicts.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix build error found with Ubuntu shipped gcc-5
~/git/bpf/tools/bpf$ make all
Auto-detecting system features:
... libbfd: [ OFF ]
... disassembler-four-args: [ OFF ]
CC bpf_jit_disasm.o
LINK bpf_jit_disasm
CC bpf_dbg.o
/home/john/git/bpf/tools/bpf/bpf_dbg.c: In function ‘cmd_load’:
/home/john/git/bpf/tools/bpf/bpf_dbg.c:1077:13: warning: ‘cont’ may be used uninitialized in this function [-Wmaybe-uninitialized]
} else if (matches(subcmd, "pcap") == 0) {
^
LINK bpf_dbg
CC bpf_asm.o
make: *** No rule to make target `bpf_exp.yacc.o', needed by `bpf_asm'. Stop.
Fixes: 5a8997f20715 ("tools: bpf: respect output directory during build")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
bpftool uses hexadecimal values when it dumps map contents:
# bpftool map dump id 1337
key: ff 13 37 ff value: a1 b2 c3 d4 ff ff ff ff
Found 1 element
In order to lookup or update values with bpftool, the natural reflex is
then to copy and paste the values to the command line, and to try to run
something like:
# bpftool map update id 1337 key ff 13 37 ff \
value 00 00 00 00 00 00 1a 2b
Error: error parsing byte: ff
bpftool complains, because it uses strtoul() with a 0 base to parse the
bytes, and that without a "0x" prefix, the bytes are considered as
decimal values (or even octal if they start with "0").
To feed hexadecimal values instead, one needs to add "0x" prefixes
everywhere necessary:
# bpftool map update id 1337 key 0xff 0x13 0x37 0xff \
value 0 0 0 0 0 0 0x1a 0x2b
To make it easier to use hexadecimal values, add an optional "hex"
keyword to put after "key" or "value" to tell bpftool to consider the
digits as hexadecimal. We can now do:
# bpftool map update id 1337 key hex ff 13 37 ff \
value hex 0 0 0 0 0 0 1a 2b
Without the "hex" keyword, the bytes are still parsed according to
normal integer notation (decimal if no prefix, or hexadecimal or octal
if "0x" or "0" prefix is used, respectively).
The patch also add related documentation and bash completion for the
"hex" keyword.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Suggested-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add recently added prog types to `bpftool prog` and attach types to
`bpftool cgroup`.
Update bpftool documentation and bash completion appropriately.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c,
we had some overlapping changes:
1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE -->
MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE
2) In 'net-next' params->log_rq_size is renamed to be
params->log_rq_mtu_frames.
3) In 'net-next' params->hard_mtu is added.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
JSON does not accept hex numbers with 0x prefix. Simply print
as decimal numbers, JSON should be primarily machine-readable.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Fixes: 831a0aafe5c3 ("tools: bpftool: add JSON output for `bpftool map *` commands")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Change bpftool to skip the removed struct bpf_verifier_env
argument in print_bpf_insn. It was passed as NULL anyway.
No functional change intended.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Fun set of conflict resolutions here...
For the mac80211 stuff, these were fortunately just parallel
adds. Trivially resolved.
In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the
function phy_disable_interrupts() earlier in the file, whilst in
'net-next' the phy_error() call from this function was removed.
In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the
'rt_table_id' member of rtable collided with a bug fix in 'net' that
added a new struct member "rt_mtu_locked" which needs to be copied
over here.
The mlxsw driver conflict consisted of net-next separating
the span code and definitions into separate files, whilst
a 'net' bug fix made some changes to that moved code.
The mlx5 infiniband conflict resolution was quite non-trivial,
the RDMA tree's merge commit was used as a guide here, and
here are their notes:
====================
Due to bug fixes found by the syzkaller bot and taken into the for-rc
branch after development for the 4.17 merge window had already started
being taken into the for-next branch, there were fairly non-trivial
merge issues that would need to be resolved between the for-rc branch
and the for-next branch. This merge resolves those conflicts and
provides a unified base upon which ongoing development for 4.17 can
be based.
Conflicts:
drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524
(IB/mlx5: Fix cleanup order on unload) added to for-rc and
commit b5ca15ad7e61 (IB/mlx5: Add proper representors support)
add as part of the devel cycle both needed to modify the
init/de-init functions used by mlx5. To support the new
representors, the new functions added by the cleanup patch
needed to be made non-static, and the init/de-init list
added by the representors patch needed to be modified to
match the init/de-init list changes made by the cleanup
patch.
Updates:
drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
prototypes added by representors patch to reflect new function
names as changed by cleanup patch
drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
stage list to match new order from cleanup patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
bpf tools use feature detection for libbfd dependency, clean up
the output files on make clean.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
There is no FORCE target in the Makefile and some of the PHONY
targets are missing, update the list.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
GCC 7 complains:
xlated_dumper.c: In function ‘print_call’:
xlated_dumper.c:179:10: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 249 and 253 [-Wformat-truncation=]
"%+d#%s", insn->off, sym->name);
Add a bit more space to the buffer so it can handle the entire
string and integer without truncation.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Auto-generated dependency files are in the OUTPUT directory,
we need to include them from there. This fixes object files
not being rebuilt after header changes.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Even in quiet mode, make finishes with
rm tools/bpf/bpf_exp.lex.c
That's because it considers the file to be intermediate. Silence that by
mentioning the lex.c file instead of the lex.o file; the dependency still
stays.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Default to quiet build, with V=1 enabling verbose build as is usual.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Use the descend macro to properly propagate $(subdir) to bpftool.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Make the 'install' target depend on the 'all' target to build the binaries
first.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Currently, make bpf_install in tools/ does not respect DESTDIR. Moreover, it
installs to /usr/bin/ unconditionally.
Let it respect DESTDIR and allow prefix to be specified. Also, to be more
consistent with bpftool and with the usual customs, default the prefix to
/usr/local instead of /usr.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Currently, the programs under tools/bpf (with the notable exception of
bpftool) do not respect the output directory (make O=dir). Fix that.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
When building bpf tool, gcc emits piles of warnings:
prog.c: In function ‘prog_fd_by_tag’:
prog.c:101:9: warning: missing initializer for field ‘type’ of ‘struct bpf_prog_info’ [-Wmissing-field-initializers]
struct bpf_prog_info info = {};
^
In file included from /home/storage/jbenc/git/net-next/tools/lib/bpf/bpf.h:26:0,
from prog.c:47:
/home/storage/jbenc/git/net-next/tools/include/uapi/linux/bpf.h:925:8: note: ‘type’ declared here
__u32 type;
^
As these warnings are not useful, switch them off.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Compilation of bpftool on a distro that lacks eBPF support in the installed
kernel headers fails with:
common.c: In function ‘is_bpffs’:
common.c:96:40: error: ‘BPF_FS_MAGIC’ undeclared (first use in this function)
return (unsigned long)st_fs.f_type == BPF_FS_MAGIC;
^
Fix this the same way it is already in tools/lib/bpf/libbpf.c and
tools/lib/api/fs/fs.c.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Improve argument parsing from batch input files in order to support
arguments enclosed between single (') or double quotes ("). For example,
this command can now be parsed in batch mode:
bpftool prog dump xlated id 1337 file "/tmp/my file with spaces"
The function responsible for parsing command arguments is copied from
its counterpart in lib/utils.c in iproute2 package.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Make bpftool read its command list from standard input when the name if
the input file is a single dash.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add support for continuation lines, such as in the following example:
prog show
prog dump xlated \
id 1337 opcodes
This patch is based after the code for support for continuation lines
from file lib/utils.c from package iproute2.
"Lines" in error messages are renamed as "commands", as we count the
number of commands (but we ignore empty lines, comments, and do not add
continuation lines to the count).
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Replace '#' by '\0' in commands read from batch files in order to avoid
processing the remaining part of the line, thus allowing users to use
comments in the files.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add bash completion for the "visual" keyword used for dumping the CFG of
eBPF programs with bpftool. Make sure we only complete with this keyword
when we dump "xlated" (and not "jited") instructions.
Acked-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds new command-line option for visualizing the xlated eBPF
sequence.
Documentations are updated accordingly.
Usage:
bpftool prog dump xlated id 2 visual
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch let bpftool print .dot graph file into stdout.
This graph is generated by the following steps:
- iterate through the function list.
- generate basic-block(BB) definition for each BB in the function.
- draw out edges to connect BBs.
This patch is the initial support, the layout and decoration of the .dot
graph could be improved.
Also, it will be useful if we could visualize some performance data from
static analysis.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds out edges for each basic-block. We will need these out
edges to finish the .dot graph drawing.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch partition basic-block for each function in the CFG. The
algorithm is simple, we identify basic-block head in a first traversal,
then second traversal to identify the tail.
We could build extended basic-block (EBB) in next steps. EBB could make the
graph more readable when the eBPF sequence is big.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch detect all sub-programs from the eBPF sequence and keep the
information in the new CFG data structure.
The detection algorithm is basically the same as the one in verifier except
we need to use insn->off instead of insn->imm to get the pc-relative call
offset. Because verifier has modified insn->off/insn->imm during finishing
the verification.
Also, we don't need to do some sanity checks as verifier has done them.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch factors out those code of dumping xlated eBPF instructions into
xlated_dumper.[h|c].
They are quite independent dumper functions, so better to be kept
separately.
New dumper support will be added in later patches in this set.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
