| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch added support to print function signature
if btf func_info is available. Note that ksym
now uses function name instead of prog_name as
prog_name has a limit of 16 bytes including
ending '\0'.
The following is a sample output for selftests
test_btf with file test_btf_haskv.o for translated insns
and jited insns respectively.
$ bpftool prog dump xlated id 1
int _dummy_tracepoint(struct dummy_tracepoint_args * arg):
0: (85) call pc+2#bpf_prog_2dcecc18072623fc_test_long_fname_1
1: (b7) r0 = 0
2: (95) exit
int test_long_fname_1(struct dummy_tracepoint_args * arg):
3: (85) call pc+1#bpf_prog_89d64e4abf0f0126_test_long_fname_2
4: (95) exit
int test_long_fname_2(struct dummy_tracepoint_args * arg):
5: (b7) r2 = 0
6: (63) *(u32 *)(r10 -4) = r2
7: (79) r1 = *(u64 *)(r1 +8)
...
22: (07) r1 += 1
23: (63) *(u32 *)(r0 +4) = r1
24: (95) exit
$ bpftool prog dump jited id 1
int _dummy_tracepoint(struct dummy_tracepoint_args * arg):
bpf_prog_b07ccb89267cf242__dummy_tracepoint:
0: push %rbp
1: mov %rsp,%rbp
......
3c: add $0x28,%rbp
40: leaveq
41: retq
int test_long_fname_1(struct dummy_tracepoint_args * arg):
bpf_prog_2dcecc18072623fc_test_long_fname_1:
0: push %rbp
1: mov %rsp,%rbp
......
3a: add $0x28,%rbp
3e: leaveq
3f: retq
int test_long_fname_2(struct dummy_tracepoint_args * arg):
bpf_prog_89d64e4abf0f0126_test_long_fname_2:
0: push %rbp
1: mov %rsp,%rbp
......
80: add $0x28,%rbp
84: leaveq
85: retq
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The function get_btf() is implemented in tools/bpf/bpftool/map.c
to get a btf structure given a map_info. This patch
refactored this function to be function btf_get_from_id()
in tools/lib/bpf so that it can be used later.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Make it possible to build bpftool without libbfd. libbfd and libopcodes are
typically provided in dev/dbg packages (binutils-dev in debian) which we
usually don't have installed on the fleet machines and we'd like a way to have
bpftool version that works without installing any additional packages.
This excludes support for disassembling jit-ted code and prints an error if
the user tries to use these features.
Tested by:
cat > FEATURES_DUMP.bpftool <<EOF
feature-libbfd=0
feature-disassembler-four-args=1
feature-reallocarray=0
feature-libelf=1
feature-libelf-mmap=1
feature-bpf=1
EOF
FEATURES_DUMP=$PWD/FEATURES_DUMP.bpftool make
ldd bpftool | grep libbfd
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This commit adds support for loading/attaching/detaching flow
dissector program.
When `bpftool loadall` is called with a flow_dissector prog (i.e. when the
'type flow_dissector' argument is passed), we load and pin all programs.
User is responsible to construct the jump table for the tail calls.
The last argument of `bpftool attach` is made optional for this use
case.
Example:
bpftool prog load tools/testing/selftests/bpf/bpf_flow.o \
/sys/fs/bpf/flow type flow_dissector \
pinmaps /sys/fs/bpf/flow
bpftool map update pinned /sys/fs/bpf/flow/jmp_table \
key 0 0 0 0 \
value pinned /sys/fs/bpf/flow/IP
bpftool map update pinned /sys/fs/bpf/flow/jmp_table \
key 1 0 0 0 \
value pinned /sys/fs/bpf/flow/IPV6
bpftool map update pinned /sys/fs/bpf/flow/jmp_table \
key 2 0 0 0 \
value pinned /sys/fs/bpf/flow/IPV6OP
bpftool map update pinned /sys/fs/bpf/flow/jmp_table \
key 3 0 0 0 \
value pinned /sys/fs/bpf/flow/IPV6FR
bpftool map update pinned /sys/fs/bpf/flow/jmp_table \
key 4 0 0 0 \
value pinned /sys/fs/bpf/flow/MPLS
bpftool map update pinned /sys/fs/bpf/flow/jmp_table \
key 5 0 0 0 \
value pinned /sys/fs/bpf/flow/VLAN
bpftool prog attach pinned /sys/fs/bpf/flow/flow_dissector flow_dissector
Tested by using the above lines to load the prog in
the test_flow_dissector.sh selftest.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This new additional argument lets users pin all maps from the object at
specified path.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds new *loadall* command which slightly differs from the
existing *load*. *load* command loads all programs from the obj file,
but pins only the first programs. *loadall* pins all programs from the
obj file under specified directory.
The intended usecase is flow_dissector, where we want to load a bunch
of progs, pin them all and after that construct a jump table.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
bpftool output is not user friendly when dumping a map with only a few
populated entries:
$ bpftool map
1: devmap name tx_devmap flags 0x0
key 4B value 4B max_entries 64 memlock 4096B
2: array name tx_idxmap flags 0x0
key 4B value 4B max_entries 64 memlock 4096B
$ bpftool map dump id 1
key:
00 00 00 00
value:
No such file or directory
key:
01 00 00 00
value:
No such file or directory
key:
02 00 00 00
value:
No such file or directory
key: 03 00 00 00 value: 03 00 00 00
Handle ENOENT by keeping the line format sane and dumping
"<no entry>" for the value
$ bpftool map dump id 1
key: 00 00 00 00 value: <no entry>
key: 01 00 00 00 value: <no entry>
key: 02 00 00 00 value: <no entry>
key: 03 00 00 00 value: 03 00 00 00
...
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The limit for memory locked in the kernel by a process is usually set to
64 kbytes by default. This can be an issue when creating large BPF maps
and/or loading many programs. A workaround is to raise this limit for
the current process before trying to create a new BPF map. Changing the
hard limit requires the CAP_SYS_RESOURCE and can usually only be done by
root user (for non-root users, a call to setrlimit fails (and sets
errno) and the program simply goes on with its rlimit unchanged).
There is no API to get the current amount of memory locked for a user,
therefore we cannot raise the limit only when required. One solution,
used by bcc, is to try to create the map, and on getting a EPERM error,
raising the limit to infinity before giving another try. Another
approach, used in iproute2, is to raise the limit in all cases, before
trying to create the map.
Here we do the same as in iproute2: the rlimit is raised to infinity
before trying to load programs or to create maps with bpftool.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
When trying to complete "bpftool map update" commands, the call to
printf would print an error message that would show on the command line
if no map is found to complete the command line.
Fix it by making sure we have map ids to complete the line with, before
we try to print something.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
When batch mode is used and all commands succeeds, bpftool prints the
number of commands processed to stderr. There is no particular reason to
use stderr for this, we could as well use stdout. It would avoid getting
unnecessary output on stderr if the standard ouptut is redirected, for
example.
Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Names used to pin eBPF programs and maps under the eBPF virtual file
system cannot contain a dot character, which is reserved for future
extensions of this file system.
Document this in bpftool man pages to avoid users getting confused if
pinning fails because of a dot.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Simplify bpf_perf_event_read_simple() a bit and fix up some minor
things along the way: the return code in the header is not of type
int but enum bpf_perf_event_ret instead. Once callback indicated
to break the loop walking event data, it also needs to be consumed
in data_tail since it has been processed already.
Moreover, bpf_perf_event_print_t callback should avoid void * as
we actually get a pointer to struct perf_event_header and thus
applications can make use of container_of() to have type checks.
The walk also doesn't have to use modulo op since the ring size is
required to be power of two.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The nfp driver is currently always JITing the BPF for 4 context/thread
mode of the NFP flow processors. Tell this to the disassembler,
otherwise some registers may be incorrectly decoded.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add a way of creating maps from user space. The command takes
as parameters most of the attributes of the map creation system
call command. After map is created its pinned to bpffs. This makes
it possible to easily and dynamically (without rebuilding programs)
test various corner cases related to map creation.
Map type names are taken from bpftool's array used for printing.
In general these days we try to make use of libbpf type names, but
there are no map type names in libbpf as of today.
As with most features I add the motivation is testing (offloads) :)
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Multiple map definition structures exist and user may have non-zero
fields in their definition that are not recognized by bpftool and
libbpf. The normal behavior is to then fail loading the map. Although
this is a good default behavior users may still want to load the map
for debugging or other reasons. This patch adds a --mapcompat flag
that can be used to override the default behavior and allow loading
the map even when it has additional non-zero fields.
For now the only user is 'bpftool prog' we can switch over other
subcommands as needed. The library exposes an API that consumes
a flags field now but I kept the original API around also in case
users of the API don't want to expose this. The flags field is an
int in case we need more control over how the API call handles
errors/features/etc in the future.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Sock map/hash introduce support for attaching programs to maps. To
date I have been doing this with custom tooling but this is less than
ideal as we shift to using bpftool as the single CLI for our BPF uses.
This patch adds new sub commands 'attach' and 'detach' to the 'prog'
command to attach programs to maps and then detach them.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding EXTRA_LDFLAGS allowing user to specify extra flags
for LD_FLAGS variable. Also adding LDFLAGS to build command
line.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Adding EXTRA_CFLAGS allowing user to specify extra flags
for CFLAGS variable.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Since map lookup error can be ENOENT or EOPNOTSUPP, let's print
strerror() as error message in normal and JSON output.
This patch adds helper function print_entry_error() to print
entry from lookup error occurs
Example: Following example dumps a map which does not support lookup.
Output before:
root# bpftool map -jp dump id 40
[
"key": ["0x0a","0x00","0x00","0x00"
],
"value": {
"error": "can\'t lookup element"
},
"key": ["0x0b","0x00","0x00","0x00"
],
"value": {
"error": "can\'t lookup element"
}
]
root# bpftool map dump id 40
can't lookup element with key:
0a 00 00 00
can't lookup element with key:
0b 00 00 00
Found 0 elements
Output after changes:
root# bpftool map dump -jp id 45
[
"key": ["0x0a","0x00","0x00","0x00"
],
"value": {
"error": "Operation not supported"
},
"key": ["0x0b","0x00","0x00","0x00"
],
"value": {
"error": "Operation not supported"
}
]
root# bpftool map dump id 45
key:
0a 00 00 00
value:
Operation not supported
key:
0b 00 00 00
value:
Operation not supported
Found 0 elements
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
do_dump() function in bpftool/map.c has deep indentations. In order
to reduce deep indent, let's move element printing code out of
do_dump() into dump_map_elem() function.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
libbpf is used more and more outside kernel tree. That means the library
should follow good practices in library design and implementation to
play well with third party code that uses it.
One of such practices is to have a common prefix (or a few) for every
interface, function or data structure, library provides. I helps to
avoid name conflicts with other libraries and keeps API consistent.
Inconsistent names in libbpf already cause problems in real life. E.g.
an application can't use both libbpf and libnl due to conflicting
symbols.
Having common prefix will help to fix current and avoid future problems.
libbpf already uses the following prefixes for its interfaces:
* bpf_ for bpf system call wrappers, program/map/elf-object
abstractions and a few other things;
* btf_ for BTF related API;
* libbpf_ for everything else.
The patch adds libbpf_ prefix to interfaces in nlattr.h that use none of
mentioned above prefixes and doesn't fit well into the first two
categories.
Since affected part of API is used in bpftool, the patch applies
corresponding change to bpftool as well. Having it in a separate patch
will cause a state of tree where bpftool is broken what may not be a
good idea.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
libbpf is used more and more outside kernel tree. That means the library
should follow good practices in library design and implementation to
play well with third party code that uses it.
One of such practices is to have a common prefix (or a few) for every
interface, function or data structure, library provides. I helps to
avoid name conflicts with other libraries and keeps API consistent.
Inconsistent names in libbpf already cause problems in real life. E.g.
an application can't use both libbpf and libnl due to conflicting
symbols.
Having common prefix will help to fix current and avoid future problems.
libbpf already uses the following prefixes for its interfaces:
* bpf_ for bpf system call wrappers, program/map/elf-object
abstractions and a few other things;
* btf_ for BTF related API;
* libbpf_ for everything else.
The patch adds libbpf_ prefix to functions and typedef in libbpf.h that
use none of mentioned above prefixes and doesn't fit well into the first
two categories.
Since affected part of API is used in bpftool, the patch applies
corresponding change to bpftool as well. Having it in a separate patch
will cause a state of tree where bpftool is broken what may not be a
good idea.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This commit adds support for BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE
map type.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Print `bpftool net` output to stdout instead of stderr. Only errors
should be printed to stderr. Regular output should go to stdout and this
is what all other subcommands of bpftool do, including --json and
--pretty formats of `bpftool net` itself.
Fixes: commit f6f3bac08ff9 ("tools/bpf: bpftool: add net support")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add BPF_MAP_TYPE_REUSEPORT_SOCKARRAY map type to the list
of maps types which bpftool recognizes.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Yonghong Song <yhs@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This is a followup patch for Commit f6f3bac08ff9
("tools/bpf: bpftool: add net support").
Some improvements are made for the bpftool net output.
Specially, plain output is more concise such that
per attachment should nicely fit in one line.
Compared to previous output, the prog tag is removed
since it can be easily obtained with program id.
Similar to xdp attachments, the device name is added
to tc attachments.
The bpf program attached through shared block
mechanism is supported as well.
$ ip link add dev v1 type veth peer name v2
$ tc qdisc add dev v1 ingress_block 10 egress_block 20 clsact
$ tc qdisc add dev v2 ingress_block 10 egress_block 20 clsact
$ tc filter add block 10 protocol ip prio 25 bpf obj bpf_shared.o sec ingress flowid 1:1
$ tc filter add block 20 protocol ip prio 30 bpf obj bpf_cyclic.o sec classifier flowid 1:1
$ bpftool net
xdp:
tc:
v2(7) clsact/ingress bpf_shared.o:[ingress] id 23
v2(7) clsact/egress bpf_cyclic.o:[classifier] id 24
v1(8) clsact/ingress bpf_shared.o:[ingress] id 23
v1(8) clsact/egress bpf_cyclic.o:[classifier] id 24
The documentation and "bpftool net help" are updated
to make it clear that current implementation only
supports xdp and tc attachments. For programs
attached to cgroups, "bpftool cgroup" can be used
to dump attachments. For other programs e.g.
sk_{filter,skb,msg,reuseport} and lwt/seg6,
iproute2 tools should be used.
The new output:
$ bpftool net
xdp:
eth0(2) driver id 198
tc:
eth0(2) clsact/ingress fbflow_icmp id 335 act [{icmp_action id 336}]
eth0(2) clsact/egress fbflow_egress id 334
$ bpftool -jp net
[{
"xdp": [{
"devname": "eth0",
"ifindex": 2,
"mode": "driver",
"id": 198
}
],
"tc": [{
"devname": "eth0",
"ifindex": 2,
"kind": "clsact/ingress",
"name": "fbflow_icmp",
"id": 335,
"act": [{
"name": "icmp_action",
"id": 336
}
]
},{
"devname": "eth0",
"ifindex": 2,
"kind": "clsact/egress",
"name": "fbflow_egress",
"id": 334
}
]
}
]
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This patch extends libbpf and bpftool to work with programs of type
BPF_PROG_TYPE_FLOW_DISSECTOR.
Signed-off-by: Petar Penkov <ppenkov@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, prog array map and map of maps are not supported
in bpftool. This patch added the support.
Different from other map types, for prog array map and
map of maps, the key returned bpf_get_next_key() may not
point to a valid value. So for these two map types,
no error will be printed out when such a scenario happens.
The following is the plain and json dump if btf is not available:
$ ./bpftool map dump id 10
key: 08 00 00 00 value: 5c 01 00 00
Found 1 element
$ ./bpftool -jp map dump id 10
[{
"key": ["0x08","0x00","0x00","0x00"
],
"value": ["0x5c","0x01","0x00","0x00"
]
}]
If the BTF is available, the dump looks below:
$ ./bpftool map dump id 2
[{
"key": 0,
"value": 7
}
]
$ ./bpftool -jp map dump id 2
[{
"key": ["0x00","0x00","0x00","0x00"
],
"value": ["0x07","0x00","0x00","0x00"
],
"formatted": {
"key": 0,
"value": 7
}
}]
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add "bpftool net" support. Networking devices are enumerated
to dump device index/name associated with xdp progs.
For each networking device, tc classes and qdiscs are enumerated
in order to check their bpf filters.
In addition, root handle and clsact ingress/egress are also checked for
bpf filters. Not all filter information is printed out. Only ifindex,
kind, filter name, prog_id and tag are printed out, which are good
enough to show attachment information. If the filter action
is a bpf action, its bpf program id, bpf name and tag will be
printed out as well.
For example,
$ ./bpftool net
xdp [
ifindex 2 devname eth0 prog_id 198
]
tc_filters [
ifindex 2 kind qdisc_htb name prefix_matcher.o:[cls_prefix_matcher_htb]
prog_id 111727 tag d08fe3b4319bc2fd act []
ifindex 2 kind qdisc_clsact_ingress name fbflow_icmp
prog_id 130246 tag 3f265c7f26db62c9 act []
ifindex 2 kind qdisc_clsact_egress name prefix_matcher.o:[cls_prefix_matcher_clsact]
prog_id 111726 tag 99a197826974c876
ifindex 2 kind qdisc_clsact_egress name cls_fg_dscp
prog_id 108619 tag dc4630674fd72dcc act []
ifindex 2 kind qdisc_clsact_egress name fbflow_egress
prog_id 130245 tag 72d2d830d6888d2c
]
$ ./bpftool -jp net
[{
"xdp": [{
"ifindex": 2,
"devname": "eth0",
"prog_id": 198
}
],
"tc_filters": [{
"ifindex": 2,
"kind": "qdisc_htb",
"name": "prefix_matcher.o:[cls_prefix_matcher_htb]",
"prog_id": 111727,
"tag": "d08fe3b4319bc2fd",
"act": []
},{
"ifindex": 2,
"kind": "qdisc_clsact_ingress",
"name": "fbflow_icmp",
"prog_id": 130246,
"tag": "3f265c7f26db62c9",
"act": []
},{
"ifindex": 2,
"kind": "qdisc_clsact_egress",
"name": "prefix_matcher.o:[cls_prefix_matcher_clsact]",
"prog_id": 111726,
"tag": "99a197826974c876"
},{
"ifindex": 2,
"kind": "qdisc_clsact_egress",
"name": "cls_fg_dscp",
"prog_id": 108619,
"tag": "dc4630674fd72dcc",
"act": []
},{
"ifindex": 2,
"kind": "qdisc_clsact_egress",
"name": "fbflow_egress",
"prog_id": 130245,
"tag": "72d2d830d6888d2c"
}
]
}
]
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
|
|
When listed all maps, bpftool currently shows (null) for xskmap.
Added xskmap type in map_type_name[] to show correct type.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The btf pretty print is added to percpu arraymap,
percpu hashmap and percpu lru hashmap.
For each <key, value> pair, the following will be
added to plain/json output:
{
"key": <pretty_print_key>,
"values": [{
"cpu": 0,
"value": <pretty_print_value_on_cpu0>
},{
"cpu": 1,
"value": <pretty_print_value_on_cpu1>
},{
....
},{
"cpu": n,
"value": <pretty_print_value_on_cpun>
}
]
}
For example, the following could be part of plain or json formatted
output:
{
"key": 0,
"values": [{
"cpu": 0,
"value": {
"ui32": 0,
"ui16": 0,
}
},{
"cpu": 1,
"value": {
"ui32": 1,
"ui16": 0,
}
},{
"cpu": 2,
"value": {
"ui32": 2,
"ui16": 0,
}
},{
"cpu": 3,
"value": {
"ui32": 3,
"ui16": 0,
}
}
]
}
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
When command line parsing fails in the while loop in do_event_pipe()
because the number of arguments is incorrect or because the keyword is
unknown, an error message is displayed, but bpftool remains stuck in
the loop. Make sure we exit the loop upon failure.
Fixes: f412eed9dfde ("tools: bpftool: add simple perf event output reader")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-08-07
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add cgroup local storage for BPF programs, which provides a fast
accessible memory for storing various per-cgroup data like number
of transmitted packets, etc, from Roman.
2) Support bpf_get_socket_cookie() BPF helper in several more program
types that have a full socket available, from Andrey.
3) Significantly improve the performance of perf events which are
reported from BPF offload. Also convert a couple of BPF AF_XDP
samples overto use libbpf, both from Jakub.
4) seg6local LWT provides the End.DT6 action, which allows to
decapsulate an outer IPv6 header containing a Segment Routing Header.
Adds this action now to the seg6local BPF interface, from Mathieu.
5) Do not mark dst register as unbounded in MOV64 instruction when
both src and dst register are the same, from Arthur.
6) Define u_smp_rmb() and u_smp_wmb() to their respective barrier
instructions on arm64 for the AF_XDP sample code, from Brian.
7) Convert the tcp_client.py and tcp_server.py BPF selftest scripts
over from Python 2 to Python 3, from Jeremy.
8) Enable BTF build flags to the BPF sample code Makefile, from Taeung.
9) Remove an unnecessary rcu_read_lock() in run_lwt_bpf(), from Taehee.
10) Several improvements to the README.rst from the BPF documentation
to make it more consistent with RST format, from Tobin.
11) Replace all occurrences of strerror() by calls to strerror_r()
in libbpf and fix a FORTIFY_SOURCE build error along with it,
from Thomas.
12) Fix a bug in bpftool's get_btf() function to correctly propagate
an error via PTR_ERR(), from Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Lots of overlapping changes, mostly trivial in nature.
The mlxsw conflict was resolving using the example
resolution at:
https://github.com/jpirko/linux_mlxsw/blob/combined_queue/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add BPF_MAP_TYPE_CGROUP_STORAGE maps to the list
of maps types which bpftool recognizes.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
I hit the following problem when I tried to use bpftool
to dump a percpu array.
$ sudo ./bpftool map show
61: percpu_array name stub flags 0x0
key 4B value 4B max_entries 1 memlock 4096B
...
$ sudo ./bpftool map dump id 61
bpftool: malloc.c:2406: sysmalloc: Assertion
`(old_top == initial_top (av) && old_size == 0) || \
((unsigned long) (old_size) >= MINSIZE && \
prev_inuse (old_top) && \
((unsigned long) old_end & (pagesize - 1)) == 0)'
failed.
Aborted
Further debugging revealed that this is due to
miscommunication between bpftool and kernel.
For example, for the above percpu_array with value size of 4B.
The map info returned to user space has value size of 4B.
In bpftool, the values array for lookup is allocated like:
info->value_size * get_possible_cpus() = 4 * get_possible_cpus()
In kernel (kernel/bpf/syscall.c), the values array size is
rounded up to multiple of 8.
round_up(map->value_size, 8) * num_possible_cpus()
= 8 * num_possible_cpus()
So when kernel copies the values to user buffer, the kernel will
overwrite beyond user buffer boundary.
This patch fixed the issue by allocating and stepping through
percpu map value array properly in bpftool.
Fixes: 71bb428fe2c19 ("tools: bpf: add bpftool")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
For untracked things of tools/bpf, add this.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Fix inconsistent IS_ERR and PTR_ERR in get_btf,
the proper pointer to be passed as argument is '*btf'
This issue was detected with the help of Coccinelle.
Fixes: 2d3feca8c44f ("bpf: btf: print map dump and lookup with btf info")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
|
|
Arguments of 'pin' subcommand should be checked
at the very beginning of do_pin_any().
Otherwise segfault errors can occur when using
'map pin' or 'prog pin' commands, so fix it.
# bpftool prog pin id
Segmentation fault
Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reported-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
bpftool does not export features it probed for, i.e.
FEATURE_DUMP_EXPORT is always empty, so don't try to communicate
the features to libbpf. It has no effect.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch augments the output of bpftool's map dump and map lookup
commands to print data along side btf info, if the correspondin btf
info is available. The outputs for each of map dump and map lookup
commands are augmented in two ways:
1. when neither of -j and -p are supplied, btf-ful map data is printed
whose aim is human readability. This means no commitments for json- or
backward- compatibility.
2. when either -j or -p are supplied, a new json object named
"formatted" is added for each key-value pair. This object contains the
same data as the key-value pair, but with btf info. "formatted" object
promises json- and backward- compatibility. Below is a sample output.
$ bpftool map dump -p id 8
[{
"key": ["0x0f","0x00","0x00","0x00"
],
"value": ["0x03", "0x00", "0x00", "0x00", ...
],
"formatted": {
"key": 15,
"value": {
"int_field": 3,
...
}
}
}
]
This patch calls btf_dumper introduced in previous patch to accomplish
the above. Indeed, btf-ful info is only displayed if btf data for the
given map is available. Otherwise existing output is displayed as-is.
Signed-off-by: Okash Khawaja <osk@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This consumes functionality exported in the previous patch. It does the
main job of printing with BTF data. This is used in the following patch
to provide a more readable output of a map's dump. It relies on
json_writer to do json printing. Below is sample output where map keys
are ints and values are of type struct A:
typedef int int_type;
enum E {
E0,
E1,
};
struct B {
int x;
int y;
};
struct A {
int m;
unsigned long long n;
char o;
int p[8];
int q[4][8];
enum E r;
void *s;
struct B t;
const int u;
int_type v;
unsigned int w1: 3;
unsigned int w2: 3;
};
$ sudo bpftool map dump id 14
[{
"key": 0,
"value": {
"m": 1,
"n": 2,
"o": "c",
"p": [15,16,17,18,15,16,17,18
],
"q": [[25,26,27,28,25,26,27,28
],[35,36,37,38,35,36,37,38
],[45,46,47,48,45,46,47,48
],[55,56,57,58,55,56,57,58
]
],
"r": 1,
"s": 0x7ffd80531cf8,
"t": {
"x": 5,
"y": 10
},
"u": 100,
"v": 20,
"w1": 0x7,
"w2": 0x3
}
}
]
This patch uses json's {} and [] to imply struct/union and array. More
explicit information can be added later. For example, a command line
option can be introduced to print whether a key or value is struct
or union, name of a struct etc. This will however come at the expense
of duplicating info when, for example, printing an array of structs.
enums are printed as ints without their names.
Signed-off-by: Okash Khawaja <osk@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Provide a new Makefile.helpers in tools/bpf, in order to build and
install the man page for eBPF helpers. This Makefile is also included in
the one used to build bpftool documentation, so that it can be called
either on its own (cd tools/bpf && make -f Makefile.helpers) or from
bpftool directory (cd tools/bpf/bpftool && make doc, or
cd tools/bpf/bpftool/Documentation && make helpers).
Makefile.helpers is not added directly to bpftool to avoid changing its
Makefile too much (helpers are not 100% directly related with bpftool).
But the possibility to build the page from bpftool directory makes us
able to package the helpers man page with bpftool, and to install it
along with bpftool documentation, so that the doc for helpers becomes
easily available to developers through the "man" program.
Cc: linux-man@vger.kernel.org
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add map parameter to prog load which will allow reuse of existing
maps instead of creating new ones.
We need feature detection and compat code for reallocarray, since
it's not available in many libc versions.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
reallocarray() is a safer variant of realloc which checks for
multiplication overflow in case of array allocation. Since it's
not available in Glibc < 2.26 import kernel's overflow.h and
add a static inline implementation when needed. Use feature
detection to probe for existence of reallocarray.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
bpf_prog_load() is a very useful helper but it doesn't give us full
flexibility of modifying the BPF objects before loading. Open code
bpf_prog_load() in bpftool so we can add extra logic in following
commits.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Sometimes program section names don't match with libbpf's expectation.
In particular XDP's default section names differ between libbpf and
iproute2. Allow users to pass program type on command line. Name
the types like the libbpf expected section names.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Extend the bpftool prog load command to also accept "dev"
parameter, which will allow us to load programs onto devices.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
