summaryrefslogtreecommitdiff
path: root/tools/arch
AgeCommit message (Collapse)AuthorFilesLines
2020-06-01Merge tag 'objtool-core-2020-06-01' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool updates from Ingo Molnar: "There are a lot of objtool changes in this cycle, all across the map: - Speed up objtool significantly, especially when there are large number of sections - Improve objtool's understanding of special instructions such as IRET, to reduce the number of annotations required - Implement 'noinstr' validation - Do baby steps for non-x86 objtool use - Simplify/fix retpoline decoding - Add vmlinux validation - Improve documentation - Fix various bugs and apply smaller cleanups" * tag 'objtool-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) objtool: Enable compilation of objtool for all architectures objtool: Move struct objtool_file into arch-independent header objtool: Exit successfully when requesting help objtool: Add check_kcov_mode() to the uaccess safelist samples/ftrace: Fix asm function ELF annotations objtool: optimize add_dead_ends for split sections objtool: use gelf_getsymshndx to handle >64k sections objtool: Allow no-op CFI ops in alternatives x86/retpoline: Fix retpoline unwind x86: Change {JMP,CALL}_NOSPEC argument x86: Simplify retpoline declaration x86/speculation: Change FILL_RETURN_BUFFER to work with objtool objtool: Add support for intra-function calls objtool: Move the IRET hack into the arch decoder objtool: Remove INSN_STACK objtool: Make handle_insn_ops() unconditional objtool: Rework allocating stack_ops on decode objtool: UNWIND_HINT_RET_OFFSET should not check registers objtool: is_fentry_call() crashes if call has no destination x86,smap: Fix smap_{save,restore}() alternatives ...
2020-05-26x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"Andy Lutomirski1-1/+1
Revert 45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long") and add a comment to discourage someone else from making the same mistake again. It turns out that some user code fails to compile if __X32_SYSCALL_BIT is unsigned long. See, for example [1] below. [ bp: Massage and do the same thing in the respective tools/ header. ] Fixes: 45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long") Reported-by: Thorsten Glaser <t.glaser@tarent.de> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@kernel.org Link: [1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=954294 Link: https://lkml.kernel.org/r/92e55442b744a5951fdc9cfee10badd0a5f7f828.1588983892.git.luto@kernel.org
2020-04-22objtool: Remove SAVE/RESTORE hintsPeter Zijlstra1-3/+1
The SAVE/RESTORE hints are now unused; remove them. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200416115118.926738768@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-04-22objtool: Introduce HINT_RET_OFFSETPeter Zijlstra1-0/+1
Normally objtool ensures a function keeps the stack layout invariant. But there is a useful exception, it is possible to stuff the return stack in order to 'inject' a 'call': push $fun ret In this case the invariant mentioned above is violated. Add an objtool HINT to annotate this and allow a function exit with a modified stack frame. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200416115118.690601403@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-04-14tools arch x86: Sync asm/cpufeatures.h with the kernel sourcesArnaldo Carvalho de Melo1-1/+4
To pick up the changes from: 077168e241ec ("x86/mce/amd: Add PPIN support for AMD MCE") 753039ef8b2f ("x86/cpu/amd: Call init_amd_zn() om Family 19h processors too") 6650cdd9a8cc ("x86/split_lock: Enable split lock detection by kernel") These don't cause any changes in tooling, just silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Wei Huang <wei.huang2@amd.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo1-0/+9
To pick up the changes in: 6650cdd9a8cc ("x86/split_lock: Enable split lock detection by kernel") Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Which causes these changes in tooling: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2020-04-01 12:11:14.789344795 -0300 +++ after 2020-04-01 12:11:56.907798879 -0300 @@ -10,6 +10,7 @@ [0x00000029] = "KNC_EVNTSEL1", [0x0000002a] = "IA32_EBL_CR_POWERON", [0x0000002c] = "EBC_FREQUENCY_ID", + [0x00000033] = "TEST_CTRL", [0x00000034] = "SMI_COUNT", [0x0000003a] = "IA32_FEAT_CTL", [0x0000003b] = "IA32_TSC_ADJUST", @@ -27,6 +28,7 @@ [0x000000c2] = "IA32_PERFCTR1", [0x000000cd] = "FSB_FREQ", [0x000000ce] = "PLATFORM_INFO", + [0x000000cf] = "IA32_CORE_CAPS", [0x000000e2] = "PKG_CST_CONFIG_CONTROL", [0x000000e7] = "IA32_MPERF", [0x000000e8] = "IA32_APERF", $ $ make -C tools/perf O=/tmp/build/perf install-bin <SNIP> CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf <SNIP> Now one can do: perf trace -e msr:* --filter=msr==IA32_CORE_CAPS or: perf trace -e msr:* --filter='msr==IA32_CORE_CAPS || msr==TEST_CTRL' And see only those MSRs being accessed via: # perf trace -v -e msr:* --filter='msr==IA32_CORE_CAPS || msr==TEST_CTRL' New filter for msr:read_msr: (msr==0xcf || msr==0x33) && (common_pid != 8263 && common_pid != 23250) New filter for msr:write_msr: (msr==0xcf || msr==0x33) && (common_pid != 8263 && common_pid != 23250) New filter for msr:rdpmc: (msr==0xcf || msr==0x33) && (common_pid != 8263 && common_pid != 23250) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/lkml/20200401153325.GC12534@kernel.org/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-03Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+3
Pull kvm updates from Paolo Bonzini: "ARM: - GICv4.1 support - 32bit host removal PPC: - secure (encrypted) using under the Protected Execution Framework ultravisor s390: - allow disabling GISA (hardware interrupt injection) and protected VMs/ultravisor support. x86: - New dirty bitmap flag that sets all bits in the bitmap when dirty page logging is enabled; this is faster because it doesn't require bulk modification of the page tables. - Initial work on making nested SVM event injection more similar to VMX, and less buggy. - Various cleanups to MMU code (though the big ones and related optimizations were delayed to 5.8). Instead of using cr3 in function names which occasionally means eptp, KVM too has standardized on "pgd". - A large refactoring of CPUID features, which now use an array that parallels the core x86_features. - Some removal of pointer chasing from kvm_x86_ops, which will also be switched to static calls as soon as they are available. - New Tigerlake CPUID features. - More bugfixes, optimizations and cleanups. Generic: - selftests: cleanups, new MMU notifier stress test, steal-time test - CSV output for kvm_stat" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits) x86/kvm: fix a missing-prototypes "vmread_error" KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y KVM: VMX: Add a trampoline to fix VMREAD error handling KVM: SVM: Annotate svm_x86_ops as __initdata KVM: VMX: Annotate vmx_x86_ops as __initdata KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup() KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes KVM: VMX: Configure runtime hooks using vmx_x86_ops KVM: VMX: Move hardware_setup() definition below vmx_x86_ops KVM: x86: Move init-only kvm_x86_ops to separate struct KVM: Pass kvm_init()'s opaque param to additional arch funcs s390/gmap: return proper error code on ksm unsharing KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move() KVM: Fix out of range accesses to memslots KVM: X86: Micro-optimize IPI fastpath delay KVM: X86: Delay read msr data iff writes ICR MSR KVM: PPC: Book3S HV: Add a capability for enabling secure guests KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs ...
2020-03-26x86/insn: Add Control-flow Enforcement (CET) instructions to the opcode mapYu-cheng Yu1-6/+11
Add the following CET instructions to the opcode map: INCSSP: Increment Shadow Stack pointer (SSP). RDSSP: Read SSP into a GPR. SAVEPREVSSP: Use "previous ssp" token at top of current Shadow Stack (SHSTK) to create a "restore token" on the previous (outgoing) SHSTK. RSTORSSP: Restore from a "restore token" to SSP. WRSS: Write to kernel-mode SHSTK (kernel-mode instruction). WRUSS: Write to user-mode SHSTK (kernel-mode instruction). SETSSBSY: Verify the "supervisor token" pointed by MSR_IA32_PL0_SSP, set the token busy, and set then Shadow Stack pointer(SSP) to the value of MSR_IA32_PL0_SSP. CLRSSBSY: Verify the "supervisor token" and clear its busy bit. ENDBR64/ENDBR32: Mark a valid 64/32 bit control transfer endpoint. Detailed information of CET instructions can be found in Intel Software Developer's Manual. Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lkml.kernel.org/r/20200204171425.28073-2-yu-cheng.yu@intel.com
2020-03-16Merge tag 'kvm-s390-next-5.7-1' of ↵Paolo Bonzini4-9/+14
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Features and Enhancements for 5.7 part1 1. Allow to disable gisa 2. protected virtual machines Protected VMs (PVM) are KVM VMs, where KVM can't access the VM's state like guest memory and guest registers anymore. Instead the PVMs are mostly managed by a new entity called Ultravisor (UV), which provides an API, so KVM and the PV can request management actions. PVMs are encrypted at rest and protected from hypervisor access while running. They switch from a normal operation into protected mode, so we can still use the standard boot process to load a encrypted blob and then move it into protected mode. Rebooting is only possible by passing through the unprotected/normal mode and switching to protected again. One mm related patch will go via Andrews mm tree ( mm/gup/writeback: add callbacks for inaccessible pages)
2020-03-16KVM: selftests: Add demand paging content to the demand paging testBen Gardon1-0/+3
The demand paging test is currently a simple page access test which, while potentially useful, doesn't add much versus the existing dirty logging test. To improve the demand paging test, add a basic userfaultfd demand paging implementation. Signed-off-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-27tools headers UAPI: Update tools's copy of kvm.h headersArnaldo Carvalho de Melo1-0/+1
Picking the changes from: 5ef8acbdd687 ("KVM: nVMX: Emulate MTF when performing instruction emulation") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h No change in tooling ensues, just the x86 kvm tooling gets rebuilt as those headers are included in its build: $ cp arch/x86/include/uapi/asm/kvm.h tools/arch/x86/include/uapi/asm/kvm.h $ make -C tools/perf make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build Auto-detecting system features: ... dwarf: [ on ] <SNIP> ... disassembler-four-args: [ on ] DESCEND plugins CC /tmp/build/perf/arch/x86/util/kvm-stat.o <SNIP> LD /tmp/build/perf/arch/x86/util/perf-in.o LD /tmp/build/perf/arch/x86/perf-in.o LD /tmp/build/perf/arch/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf <SNIP> $ As it doesn't seem to be used there: $ grep STATE tools/perf/arch/x86/util/kvm-stat.c $ And the 'perf trace' beautifier table generator isn't interested in these things: $ grep regex= tools/perf/trace/beauty/kvm_ioctl.sh regex='^#[[:space:]]*define[[:space:]]+KVM_(\w+)[[:space:]]+_IO[RW]*\([[:space:]]*KVMIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*' $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oupton@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo1-0/+2
To pick up the changes from these csets: 21b5ee59ef18 ("x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF") $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ git diff diff --git a/tools/arch/x86/include/asm/msr-index.h b/tools/arch/x86/include/asm/msr-index.h index ebe1685e92dd..d5e517d1c3dd 100644 --- a/tools/arch/x86/include/asm/msr-index.h +++ b/tools/arch/x86/include/asm/msr-index.h @@ -512,6 +512,8 @@ #define MSR_K7_HWCR 0xc0010015 #define MSR_K7_HWCR_SMMLOCK_BIT 0 #define MSR_K7_HWCR_SMMLOCK BIT_ULL(MSR_K7_HWCR_SMMLOCK_BIT) +#define MSR_K7_HWCR_IRPERF_EN_BIT 30 +#define MSR_K7_HWCR_IRPERF_EN BIT_ULL(MSR_K7_HWCR_IRPERF_EN_BIT) #define MSR_K7_FID_VID_CTL 0xc0010041 #define MSR_K7_FID_VID_STATUS 0xc0010042 $ That don't result in any change in tooling: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after $ To silence this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-12tools headers kvm: Sync kvm headers with the kernel sourcesArnaldo Carvalho de Melo1-2/+10
To pick up the changes from: 290a6bb06de9 ("arm64: KVM: Add UAPI notes for swapped registers") No tools changes are caused by this. This addresses these tools/perf build warnings: Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrew Jones <drjones@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-12tools arch x86: Sync asm/cpufeatures.h with the kernel sourcesArnaldo Carvalho de Melo1-0/+2
To pick up the changes from: 85c17291e2eb ("x86/cpufeatures: Add flag to track whether MSR IA32_FEAT_CTL is configured") f444a5ff95dc ("x86/cpufeatures: Add support for fast short REP; MOVSB") These don't cause any changes in tooling, just silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-12tools headers x86: Sync disabled-features.hArnaldo Carvalho de Melo1-7/+1
To silence the following tools/perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h' diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h Picking up the changes in: 45fc24e89b7c ("x86/mpx: remove MPX from arch/x86") that didn't entail any functionality change in the tooling side. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-11tools headers UAPI: Sync copy of arm64's asm/unistd.h with the kernel sourcesArnaldo Carvalho de Melo1-0/+1
To get the changes in: 3e3c8ca5a351 ("arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headers") Silencing this tools/perf/ build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/unistd.h' differs from latest version at 'arch/arm64/include/uapi/asm/unistd.h' diff -u tools/arch/arm64/include/uapi/asm/unistd.h arch/arm64/include/uapi/asm/unistd.h Which will probably end up enabling the use of "clone3" in 'perf trace -e', haven't checked the build with this change on an arm64 system. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Amanieu d'Antras <amanieu@gmail.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-01-31Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - three fixes and a cleanup for the resctrl code - a HyperV fix - a fix to /proc/kcore contents in live debugging sessions - a fix for the x86 decoder opcode map" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/decoder: Add TEST opcode to Group3-2 x86/resctrl: Clean up unused function parameter in mkdir path x86/resctrl: Fix a deadlock due to inaccurate reference x86/resctrl: Fix use-after-free due to inaccurate refcount of rdtgroup x86/resctrl: Fix use-after-free when deleting resource groups x86/hyper-v: Add "polling" bit to hv_synic_sint x86/crash: Define arch_crash_save_vmcoreinfo() if CONFIG_CRASH_CORE=y
2020-01-31Merge tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-2/+2
Pull KVM updates from Paolo Bonzini: "This is the first batch of KVM changes. ARM: - cleanups and corner case fixes. PPC: - Bugfixes x86: - Support for mapping DAX areas with large nested page table entries. - Cleanups and bugfixes here too. A particularly important one is a fix for FPU load when the thread has TIF_NEED_FPU_LOAD. There is also a race condition which could be used in guest userspace to exploit the guest kernel, for which the embargo expired today. - Fast path for IPI delivery vmexits, shaving about 200 clock cycles from IPI latency. - Protect against "Spectre-v1/L1TF" (bring data in the cache via speculative out of bound accesses, use L1TF on the sibling hyperthread to read it), which unfortunately is an even bigger whack-a-mole game than SpectreV1. Sean continues his mission to rewrite KVM. In addition to a sizable number of x86 patches, this time he contributed a pretty large refactoring of vCPU creation that affects all architectures but should not have any visible effect. s390 will come next week together with some more x86 patches" * tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits) x86/KVM: Clean up host's steal time structure x86/KVM: Make sure KVM_VCPU_FLUSH_TLB flag is not missed x86/kvm: Cache gfn to pfn translation x86/kvm: Introduce kvm_(un)map_gfn() x86/kvm: Be careful not to clear KVM_VCPU_FLUSH_TLB bit KVM: PPC: Book3S PR: Fix -Werror=return-type build failure KVM: PPC: Book3S HV: Release lock on page-out failure path KVM: arm64: Treat emulated TVAL TimerValue as a signed 32-bit integer KVM: arm64: pmu: Only handle supported event counters KVM: arm64: pmu: Fix chained SW_INCR counters KVM: arm64: pmu: Don't mark a counter as chained if the odd one is disabled KVM: arm64: pmu: Don't increment SW_INCR if PMCR.E is unset KVM: x86: Use a typedef for fastop functions KVM: X86: Add 'else' to unify fastop and execute call path KVM: x86: inline memslot_valid_for_gpte KVM: x86/mmu: Use huge pages for DAX-backed files KVM: x86/mmu: Remove lpage_is_disallowed() check from set_spte() KVM: x86/mmu: Fold max_mapping_level() into kvm_mmu_hugepage_adjust() KVM: x86/mmu: Zap any compound page when collapsing sptes KVM: x86/mmu: Remove obsolete gfn restoration in FNAME(fetch) ...
2020-01-28Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds1-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu-features updates from Ingo Molnar: "The biggest change in this cycle was a large series from Sean Christopherson to clean up the handling of VMX features. This both fixes bugs/inconsistencies and makes the code more coherent and future-proof. There are also two cleanups and a minor TSX syslog messages enhancement" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/cpu: Remove redundant cpu_detect_cache_sizes() call x86/cpu: Print "VMX disabled" error message iff KVM is enabled KVM: VMX: Allow KVM_INTEL when building for Centaur and/or Zhaoxin CPUs perf/x86: Provide stubs of KVM helpers for non-Intel CPUs KVM: VMX: Use VMX_FEATURE_* flags to define VMCS control bits KVM: VMX: Check for full VMX support when verifying CPU compatibility KVM: VMX: Use VMX feature flag to query BIOS enabling KVM: VMX: Drop initialization of IA32_FEAT_CTL MSR x86/cpufeatures: Add flag to track whether MSR IA32_FEAT_CTL is configured x86/cpu: Set synthetic VMX cpufeatures during init_ia32_feat_ctl() x86/cpu: Print VMX flags in /proc/cpuinfo using VMX_FEATURES_* x86/cpu: Detect VMX features on Intel, Centaur and Zhaoxin CPUs x86/vmx: Introduce VMX_FEATURES_* x86/cpu: Clear VMX feature flag if VMX is not fully enabled x86/zhaoxin: Use common IA32_FEAT_CTL MSR initialization x86/centaur: Use common IA32_FEAT_CTL MSR initialization x86/mce: WARN once if IA32_FEAT_CTL MSR is left unlocked x86/intel: Initialize IA32_FEAT_CTL MSR at boot tools/x86: Sync msr-index.h from kernel sources selftests, kvm: Replace manual MSR defs with common msr-index.h ...
2020-01-22x86/decoder: Add TEST opcode to Group3-2Masami Hiramatsu1-1/+1
Add TEST opcode to Group3-2 reg=001b as same as Group3-1 does. Commit 12a78d43de76 ("x86/decoder: Add new TEST instruction pattern") added a TEST opcode assignment to f6 XX/001/XXX (Group 3-1), but did not add f7 XX/001/XXX (Group 3-2). Actually, this TEST opcode variant (ModRM.reg /1) is not described in the Intel SDM Vol2 but in AMD64 Architecture Programmer's Manual Vol.3, Appendix A.2 Table A-6. ModRM.reg Extensions for the Primary Opcode Map. Without this fix, Randy found a warning by insn_decoder_test related to this issue as below. HOSTCC arch/x86/tools/insn_decoder_test HOSTCC arch/x86/tools/insn_sanity TEST posttest arch/x86/tools/insn_decoder_test: warning: Found an x86 instruction decoder bug, please report this. arch/x86/tools/insn_decoder_test: warning: ffffffff81000bf1: f7 0b 00 01 08 00 testl $0x80100,(%rbx) arch/x86/tools/insn_decoder_test: warning: objdump says 6 bytes, but insn_get_length() says 2 arch/x86/tools/insn_decoder_test: warning: Decoded and checked 11913894 instructions with 1 failures TEST posttest arch/x86/tools/insn_sanity: Success: decoded and checked 1000000 random instructions with 0 errors (seed:0x871ce29c) To fix this error, add the TEST opcode according to AMD64 APM Vol.3. [ bp: Massage commit message. ] Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lkml.kernel.org/r/157966631413.9580.10311036595431878351.stgit@devnote2
2020-01-13tools/x86: Sync msr-index.h from kernel sourcesSean Christopherson1-6/+8
Sync msr-index.h to pull in recent renames of the IA32_FEATURE_CONTROL MSR definitions. Update KVM's VMX selftest and turbostat accordingly. Keep the full name in turbostat's output to avoid breaking someone's workflow, e.g. if a script is looking for the full name. While using the renamed defines is by no means necessary, do the sync now to avoid leaving a landmine that will get stepped on the next time msr-index.h needs to be refreshed for some other reason. No functional change intended. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20191221044513.21680-4-sean.j.christopherson@intel.com
2020-01-08KVM: VMX: Rename INTERRUPT_PENDING to INTERRUPT_WINDOWXiaoyao Li1-2/+2
Rename interrupt-windown exiting related definitions to match the latest Intel SDM. No functional changes. Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-02tools arch x86: Sync asm/cpufeatures.h with the kernel sourcesArnaldo Carvalho de Melo1-0/+3
To pick up the changes from: a25bbc2644f0 ("Merge branches 'x86-cpu-for-linus' and 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip") db4d30fbb71b ("x86/bugs: Add ITLB_MULTIHIT bug infrastructure") 1b42f017415b ("x86/speculation/taa: Add mitigation for TSX Async Abort") 9d40b85bb46a ("x86/cpufeatures: Add feature bit RDPRU on AMD") These don't cause any changes in tooling, just silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Babu Moger <babu.moger@amd.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineela Tummalapalli <vineela.tummalapalli@intel.com> Link: https://lkml.kernel.org/n/tip-yufg9yt2nbkh45r9xvxnnscq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-12-02tools headers kvm: Sync kvm headers with the kernel sourcesArnaldo Carvalho de Melo3-2/+9
To pick up the changes from: 14edff88315a Merge tag 'kvmarm-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD a4b28f5c6798 Merge remote-tracking branch 'kvmarm/kvm-arm64/stolen-time' into kvmarm-master/next 58772e9a3db7 ("KVM: arm64: Provide VCPU attributes for stolen time") da345174ceca ("KVM: arm/arm64: Allow user injection of external data aborts") c726200dd106 ("KVM: arm/arm64: Allow reporting non-ISV data aborts to userspace") efe5ddcae496 ("KVM: PPC: Book3S HV: XIVE: Allow userspace to set the # of VPs") No tools changes are caused by this, as the only defines so far used from these files are for syscall arg pretty printing are: $ grep KVM tools/perf/trace/beauty/*.sh tools/perf/trace/beauty/kvm_ioctl.sh:regex='^#[[:space:]]*define[[:space:]]+KVM_(\w+)[[:space:]]+_IO[RW]*\([[:space:]]*KVMIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*' $ Some are also include by: tools/perf/arch/x86/util/kvm-stat.c tools/perf/arch/powerpc/util/kvm-stat.c This addresses these tools/perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/kvm.h' differs from latest version at 'arch/powerpc/include/uapi/asm/kvm.h' diff -u tools/arch/powerpc/include/uapi/asm/kvm.h arch/powerpc/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h' diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Cc: Fabiano Rosas <farosas@linux.ibm.com> Cc: Greg Kurz <groug@kaod.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Steven Price <steven.price@arm.com> Link: https://lkml.kernel.org/n/tip-qrjdudhq25mk5bfnhveofbm4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-12-02tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo1-0/+18
To pick up the changes from these csets: 3f3c8be973af Merge tag 'for-linus-5.5a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip 4e3f77d8419b ("xen/mcelog: add PPIN to record when available") db4d30fbb71b ("x86/bugs: Add ITLB_MULTIHIT bug infrastructure") 1b42f017415b ("x86/speculation/taa: Add mitigation for TSX Async Abort") c2955f270a84 ("x86/msr: Add the IA32_TSX_CTRL MSR") These are the changes in tooling that this udpate ensues: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > /tmp/before $ $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > /tmp/after $ diff -u /tmp/before /tmp/after --- /tmp/before 2019-12-02 11:54:44.371035723 -0300 +++ /tmp/after 2019-12-02 11:55:31.847859784 -0300 @@ -48,6 +48,7 @@ [0x00000119] = "IA32_BBL_CR_CTL", [0x0000011e] = "IA32_BBL_CR_CTL3", [0x00000120] = "IDT_MCR_CTRL", + [0x00000122] = "IA32_TSX_CTRL", [0x00000140] = "MISC_FEATURES_ENABLES", [0x00000174] = "IA32_SYSENTER_CS", [0x00000175] = "IA32_SYSENTER_ESP", @@ -283,4 +284,6 @@ [0xc0010240 - x86_AMD_V_KVM_MSRs_offset] = "F15H_NB_PERF_CTL", [0xc0010241 - x86_AMD_V_KVM_MSRs_offset] = "F15H_NB_PERF_CTR", [0xc0010280 - x86_AMD_V_KVM_MSRs_offset] = "F15H_PTSC", + [0xc00102f0 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PPIN_CTL", + [0xc00102f1 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PPIN", }; $ CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o Now it is possible to use these strings when setting up filters for the msr:* tracepoints, like: # perf trace -e msr:* --filter=msr==IA32_TSX_CTRL ^C[root@quaco ~]# If we use an invalid operator we can check what is the filter that is put in place: # perf trace -e msr:* --filter=msr=IA32_TSX_CTRL Failed to set filter "(msr=0x122) && (common_pid != 25976 && common_pid != 25860)" on event msr:read_msr with 22 (Invalid argument) One can as well use -v to see the tracepoints and its filters: # perf trace -v -e msr:* --filter=msr==IA32_TSX_CTRL Using CPUID GenuineIntel-6-8E-A New filter for msr:read_msr: (msr==0x122) && (common_pid != 26110 && common_pid != 25860) New filter for msr:write_msr: (msr==0x122) && (common_pid != 26110 && common_pid != 25860) New filter for msr:rdpmc: (msr==0x122) && (common_pid != 26110 && common_pid != 25860) mmap size 528384B ^C# Better than keep looking up those numbers, works with callchains as well, e.g. for something more common: # perf trace -e msr:*/max-stack=16/ --filter="msr==IA32_SPEC_CTRL" --max-events=2 0.000 SCTP timer/6158 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __sched_text_start ([kernel.kallsyms]) schedule ([kernel.kallsyms]) schedule_hrtimeout_range_clock ([kernel.kallsyms]) poll_schedule_timeout.constprop.0 ([kernel.kallsyms]) do_select ([kernel.kallsyms]) core_sys_select ([kernel.kallsyms]) kern_select ([kernel.kallsyms]) __x64_sys_select ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) entry_SYSCALL_64 ([kernel.kallsyms]) __select (/usr/lib64/libc-2.29.so) [0] ([unknown]) 0.024 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __sched_text_start ([kernel.kallsyms]) schedule_idle ([kernel.kallsyms]) do_idle ([kernel.kallsyms]) cpu_startup_entry ([kernel.kallsyms]) start_secondary ([kernel.kallsyms]) [0x2000d4] ([kernel.kallsyms]) # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineela Tummalapalli <vineela.tummalapalli@intel.com> Link: https://lkml.kernel.org/n/tip-n1xd78fpd5lxn4q1brqi2jl6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-12-02perf bench: Update the copies of x86's mem{cpy,set}_64.SArnaldo Carvalho de Melo2-18/+18
And update linux/linkage.h, which requires in turn that we make these files switch from ENTRY()/ENDPROC() to SYM_FUNC_START()/SYM_FUNC_END(): tools/perf/arch/arm64/tests/regs_load.S tools/perf/arch/arm/tests/regs_load.S tools/perf/arch/powerpc/tests/regs_load.S tools/perf/arch/x86/tests/regs_load.S We also need to switch SYM_FUNC_START_LOCAL() to SYM_FUNC_START() for the functions used directly by 'perf bench', and update tools/perf/check_headers.sh to ignore those changes when checking if the kernel original files drifted from the copies we carry. This is to get the changes from: 6dcc5627f6ae ("x86/asm: Change all ENTRY+ENDPROC to SYM_FUNC_*") ef1e03152cb0 ("x86/asm: Make some functions local") e9b9d020c487 ("x86/asm: Annotate aliases") And address these tools/perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S' diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S' diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-tay3l8x8k11p7y3qcpqh9qh5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-29Merge tag 'perf-core-for-mingo-5.5-20191128' of ↵Ingo Molnar1-12/+32
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: perf script: Adrian Hunter: - Fix brstackinsn for AUXTRACE. - Fix invalid LBR/binary mismatch error. perf diff: Arnaldo Carvalho de Melo: - Use llabs() with 64-bit values, fixing the build in some 32-bit architectures. perf pmu: Andi Kleen: - Use file system cache to optimize sysfs access. x86: Adrian Hunter: - Add some more Intel instructions to the opcode map and to the perf test entry: gf2p8affineinvqb, gf2p8affineqb, gf2p8mulb, v4fmaddps, v4fmaddss, v4fnmaddps, v4fnmaddss, vaesdec, vaesdeclast, vaesenc, vaesenclast, vcvtne2ps2bf16, vcvtneps2bf16, vdpbf16ps, vgf2p8affineinvqb, vgf2p8affineqb, vgf2p8mulb, vp2intersectd, vp2intersectq, vp4dpwssd, vp4dpwssds, vpclmulqdq, vpcompressb, vpcompressw, vpdpbusd, vpdpbusds, vpdpwssd, vpdpwssds, vpexpandb, vpexpandw, vpopcntb, vpopcntd, vpopcntq, vpopcntw, vpshldd, vpshldq, vpshldvd, vpshldvq, vpshldvw, vpshldw, vpshrdd, vpshrdq, vpshrdvd, vpshrdvq, vpshrdvw, vpshrdw, vpshufbitqmb. perf affinity: Andi Kleen: - Add infrastructure to save/restore affinity perf maps: Arnaldo Carvalho de Melo: - Merge 'struct maps' with 'struct map_groups', as there is a 1x1 relationship, simplifying code overal. perf build: Jiri Olsa: - Allow to link with libbpf dynamicaly. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-27Merge branch 'perf-core-for-linus' of ↵Linus Torvalds6-6/+1069
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main kernel side changes in this cycle were: - Various Intel-PT updates and optimizations (Alexander Shishkin) - Prohibit kprobes on Xen/KVM emulate prefixes (Masami Hiramatsu) - Add support for LSM and SELinux checks to control access to the perf syscall (Joel Fernandes) - Misc other changes, optimizations, fixes and cleanups - see the shortlog for details. There were numerous tooling changes as well - 254 non-merge commits. Here are the main changes - too many to list in detail: - Enhancements to core tooling infrastructure, perf.data, libperf, libtraceevent, event parsing, vendor events, Intel PT, callchains, BPF support and instruction decoding. - There were updates to the following tools: perf annotate perf diff perf inject perf kvm perf list perf maps perf parse perf probe perf record perf report perf script perf stat perf test perf trace - And a lot of other changes: please see the shortlog and Git log for more details" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (279 commits) perf parse: Fix potential memory leak when handling tracepoint errors perf probe: Fix spelling mistake "addrees" -> "address" libtraceevent: Fix memory leakage in copy_filter_type libtraceevent: Fix header installation perf intel-bts: Does not support AUX area sampling perf intel-pt: Add support for decoding AUX area samples perf intel-pt: Add support for recording AUX area samples perf pmu: When using default config, record which bits of config were changed by the user perf auxtrace: Add support for queuing AUX area samples perf session: Add facility to peek at all events perf auxtrace: Add support for dumping AUX area samples perf inject: Cut AUX area samples perf record: Add aux-sample-size config term perf record: Add support for AUX area sampling perf auxtrace: Add support for AUX area sample recording perf auxtrace: Move perf_evsel__find_pmu() perf record: Add a function to test for kernel support for AUX area sampling perf tools: Add kernel AUX area sampling definitions perf/core: Make the mlock accounting simple again perf report: Jump to symbol source view from total cycles view ...
2019-11-26Merge branches 'x86-cpu-for-linus' and 'x86-fpu-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu and fpu updates from Ingo Molnar: - math-emu fixes - CPUID updates - sanity-check RDRAND output to see whether the CPU at least pretends to produce random data - various unaligned-access across cachelines fixes in preparation of hardware level split-lock detection - fix MAXSMP constraints to not allow !CPUMASK_OFFSTACK kernels with larger than 512 NR_CPUS - misc FPU related cleanups * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Align the x86_capability array to size of unsigned long x86/cpu: Align cpu_caps_cleared and cpu_caps_set to unsigned long x86/umip: Make the comments vendor-agnostic x86/Kconfig: Rename UMIP config parameter x86/Kconfig: Enforce limit of 512 CPUs with MAXSMP and no CPUMASK_OFFSTACK x86/cpufeatures: Add feature bit RDPRU on AMD x86/math-emu: Limit MATH_EMULATION to 486SX compatibles x86/math-emu: Check __copy_from_user() result x86/rdrand: Sanity-check RDRAND output * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Use XFEATURE_FP/SSE enum values instead of hardcoded numbers x86/fpu: Shrink space allocated for xstate_comp_offsets x86/fpu: Update stale variable name in comment
2019-11-26Merge branches 'core-objtool-for-linus', 'x86-cleanups-for-linus' and ↵Linus Torvalds1-2/+2
'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 objtool, cleanup, and apic updates from Ingo Molnar: "Objtool: - Fix a gawk 5.0 incompatibility in gen-insn-attr-x86.awk. Most distros are still on gawk 4.2.x. Cleanup: - Misc cleanups, plus the removal of obsolete code such as Calgary IOMMU support, which code hasn't seen any real testing in a long time and there's no known users left. apic: - Two changes: a cleanup and a fix for an (old) race for oneshot threaded IRQ handlers" * 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/insn: Fix awk regexp warnings * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Remove unused asm/rio.h x86: Fix typos in comments x86/pci: Remove #ifdef __KERNEL__ guard from <asm/pci.h> x86/pci: Remove pci_64.h x86: Remove the calgary IOMMU driver x86/apic, x86/uprobes: Correct parameter names in kernel-doc comments x86/kdump: Remove the unused crash_copy_backup_region() x86/nmi: Remove stale EDAC include leftover * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioapic: Rename misnamed functions x86/ioapic: Prevent inconsistent state when moving an interrupt
2019-11-26x86/insn: Add some more Intel instructions to the opcode mapAdrian Hunter1-12/+32
Add to the opcode map the following instructions: v4fmaddps v4fmaddss v4fnmaddps v4fnmaddss vaesdec vaesdeclast vaesenc vaesenclast vcvtne2ps2bf16 vcvtneps2bf16 vdpbf16ps gf2p8affineinvqb vgf2p8affineinvqb gf2p8affineqb vgf2p8affineqb gf2p8mulb vgf2p8mulb vp2intersectd vp2intersectq vp4dpwssd vp4dpwssds vpclmulqdq vpcompressb vpcompressw vpdpbusd vpdpbusds vpdpwssd vpdpwssds vpexpandb vpexpandw vpopcntb vpopcntd vpopcntq vpopcntw vpshldd vpshldq vpshldvd vpshldvq vpshldvw vpshldw vpshrdd vpshrdq vpshrdvd vpshrdvq vpshrdvw vpshrdw vpshufbitqmb For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037). The instruction decoding can be tested using the perf tools' "x86 instruction decoder - new instructions" test e.g. $ perf test -v "new " 2>&1 | grep -i 'v4fmaddps' Decoded ok: 62 f2 7f 48 9a 20 v4fmaddps (%eax),%zmm0,%zmm4 Decoded ok: 62 f2 7f 48 9a a4 c8 78 56 34 12 v4fmaddps 0x12345678(%eax,%ecx,8),%zmm0,%zmm4 Decoded ok: 62 f2 7f 48 9a 20 v4fmaddps (%rax),%zmm0,%zmm4 Decoded ok: 67 62 f2 7f 48 9a 20 v4fmaddps (%eax),%zmm0,%zmm4 Decoded ok: 62 f2 7f 48 9a a4 c8 78 56 34 12 v4fmaddps 0x12345678(%rax,%rcx,8),%zmm0,%zmm4 Decoded ok: 67 62 f2 7f 48 9a a4 c8 78 56 34 12 v4fmaddps 0x12345678(%eax,%ecx,8),%zmm0,%zmm4 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20191125125044.31879-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-25Merge branch 'x86/core' into perf/core, to resolve conflicts and to pick up ↵Ingo Molnar3-0/+54
completed topic tree Conflicts: tools/perf/check-headers.sh Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-19x86/insn: Add some Intel instructions to the opcode mapAdrian Hunter1-6/+12
Add to the opcode map the following instructions: cldemote tpause umonitor umwait movdiri movdir64b enqcmd enqcmds encls enclu enclv pconfig wbnoinvd For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037). The instruction decoding can be tested using the perf tools' "x86 instruction decoder - new instructions" test as folllows: $ perf test -v "new " 2>&1 | grep -i cldemote Decoded ok: 0f 1c 00 cldemote (%eax) Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678 Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8) Decoded ok: 0f 1c 00 cldemote (%rax) Decoded ok: 41 0f 1c 00 cldemote (%r8) Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678 Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8) Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8) $ perf test -v "new " 2>&1 | grep -i tpause Decoded ok: 66 0f ae f3 tpause %ebx Decoded ok: 66 0f ae f3 tpause %ebx Decoded ok: 66 41 0f ae f0 tpause %r8d $ perf test -v "new " 2>&1 | grep -i umonitor Decoded ok: 67 f3 0f ae f0 umonitor %ax Decoded ok: f3 0f ae f0 umonitor %eax Decoded ok: 67 f3 0f ae f0 umonitor %eax Decoded ok: f3 0f ae f0 umonitor %rax Decoded ok: 67 f3 41 0f ae f0 umonitor %r8d $ perf test -v "new " 2>&1 | grep -i umwait Decoded ok: f2 0f ae f0 umwait %eax Decoded ok: f2 0f ae f0 umwait %eax Decoded ok: f2 41 0f ae f0 umwait %r8d $ perf test -v "new " 2>&1 | grep -i movdiri Decoded ok: 0f 38 f9 03 movdiri %eax,(%ebx) Decoded ok: 0f 38 f9 88 78 56 34 12 movdiri %ecx,0x12345678(%eax) Decoded ok: 48 0f 38 f9 03 movdiri %rax,(%rbx) Decoded ok: 48 0f 38 f9 88 78 56 34 12 movdiri %rcx,0x12345678(%rax) $ perf test -v "new " 2>&1 | grep -i movdir64b Decoded ok: 66 0f 38 f8 18 movdir64b (%eax),%ebx Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx Decoded ok: 67 66 0f 38 f8 1c movdir64b (%si),%bx Decoded ok: 67 66 0f 38 f8 8c 34 12 movdir64b 0x1234(%si),%cx Decoded ok: 66 0f 38 f8 18 movdir64b (%rax),%rbx Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%rax),%rcx Decoded ok: 67 66 0f 38 f8 18 movdir64b (%eax),%ebx Decoded ok: 67 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i enqcmd Decoded ok: f2 0f 38 f8 18 enqcmd (%eax),%ebx Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx Decoded ok: 67 f2 0f 38 f8 1c enqcmd (%si),%bx Decoded ok: 67 f2 0f 38 f8 8c 34 12 enqcmd 0x1234(%si),%cx Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx Decoded ok: f2 0f 38 f8 18 enqcmd (%rax),%rbx Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%rax),%rcx Decoded ok: 67 f2 0f 38 f8 18 enqcmd (%eax),%ebx Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i enqcmds Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i encls Decoded ok: 0f 01 cf encls Decoded ok: 0f 01 cf encls $ perf test -v "new " 2>&1 | grep -i enclu Decoded ok: 0f 01 d7 enclu Decoded ok: 0f 01 d7 enclu $ perf test -v "new " 2>&1 | grep -i enclv Decoded ok: 0f 01 c0 enclv Decoded ok: 0f 01 c0 enclv $ perf test -v "new " 2>&1 | grep -i pconfig Decoded ok: 0f 01 c5 pconfig Decoded ok: 0f 01 c5 pconfig $ perf test -v "new " 2>&1 | grep -i wbnoinvd Decoded ok: f3 0f 09 wbnoinvd Decoded ok: f3 0f 09 wbnoinvd Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20191115135447.6519-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-07x86/Kconfig: Rename UMIP config parameterBabu Moger1-1/+1
AMD 2nd generation EPYC processors support the UMIP (User-Mode Instruction Prevention) feature. So, rename X86_INTEL_UMIP to generic X86_UMIP and modify the text to cover both Intel and AMD. [ bp: take of the disabled-features.h copy in tools/ too. ] Signed-off-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "x86@kernel.org" <x86@kernel.org> Link: https://lkml.kernel.org/r/157298912544.17462.2018334793891409521.stgit@naples-babu.amd.com
2019-10-22Merge tag 'perf-core-for-mingo-5.5-20191021' of ↵Ingo Molnar1-0/+146
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: perf trace: - Add syscall failure stats to -s/--summary and -S/--with-summary, works in combination with specifying just a set of syscalls, see below first with -s/--summary, then with -S/--with-summary just for the syscalls we saw failing with -s: # perf trace -s sleep 1 Summary of events: sleep (16218), 80 events, 93.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) ----------- ----- ------ -------- -------- -------- -------- ------ nanosleep 1 0 1000.091 1000.091 1000.091 1000.091 0.00% mmap 8 0 0.045 0.005 0.006 0.008 7.09% mprotect 4 0 0.028 0.005 0.007 0.009 11.38% openat 3 0 0.021 0.005 0.007 0.009 14.07% munmap 1 0 0.017 0.017 0.017 0.017 0.00% brk 4 0 0.010 0.001 0.002 0.004 23.15% read 4 0 0.009 0.002 0.002 0.003 8.13% close 5 0 0.008 0.001 0.002 0.002 10.83% fstat 3 0 0.006 0.002 0.002 0.002 6.97% access 1 1 0.006 0.006 0.006 0.006 0.00% lseek 3 0 0.005 0.001 0.002 0.002 7.37% arch_prctl 2 1 0.004 0.001 0.002 0.002 17.64% execve 1 0 0.000 0.000 0.000 0.000 0.00% # perf trace -e access,arch_prctl -S sleep 1 0.000 ( 0.006 ms): sleep/19503 arch_prctl(option: 0x3001, arg2: 0x7fff165996b0) = -1 EINVAL (Invalid argument) 0.024 ( 0.006 ms): sleep/19503 access(filename: 0x2177e510, mode: R) = -1 ENOENT (No such file or directory) 0.136 ( 0.002 ms): sleep/19503 arch_prctl(option: SET_FS, arg2: 0x7f9421737580) = 0 Summary of events: sleep (19503), 6 events, 50.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) ---------- ----- ------ ------ ------ ------ ------ ------ arch_prctl 2 1 0.008 0.002 0.004 0.006 57.22% access 1 1 0.006 0.006 0.006 0.006 0.00% # - Introduce --errno-summary, to drill down a bit more in the errno stats: # perf trace --errno-summary -e access,arch_prctl -S sleep 1 0.000 ( 0.006 ms): sleep/5587 arch_prctl(option: 0x3001, arg2: 0x7ffd6ba6aa00) = -1 EINVAL (Invalid argument) 0.028 ( 0.007 ms): sleep/5587 access(filename: 0xb83d9510, mode: R) = -1 ENOENT (No such file or directory) 0.172 ( 0.003 ms): sleep/5587 arch_prctl(option: SET_FS, arg2: 0x7f45b8392580) = 0 Summary of events: sleep (5587), 6 events, 50.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) ---------- ----- ------ ------ ------ ------ ------ ------ arch_prctl 2 1 0.009 0.003 0.005 0.006 38.90% EINVAL: 1 access 1 1 0.007 0.007 0.007 0.007 0.00% ENOENT: 1 # - Filter own pid to avoid a feedback look in 'perf trace record -a' - Add the glue for the auto generated x86 IRQ vector array. - Show error message when not finding a field used in a filter expression # perf trace --max-events=4 -e syscalls:sys_enter_write --filter="cnt>32767" Failed to set filter "(cnt>32767) && (common_pid != 19938 && common_pid != 8922)" on event syscalls:sys_enter_write with 22 (Invalid argument) # # perf trace --max-events=4 -e syscalls:sys_enter_write --filter="count>32767" 0.000 python3.5/17535 syscalls:sys_enter_write(fd: 3, buf: 0x564b0dc53600, count: 172086) 12.641 python3.5.post/17535 syscalls:sys_enter_write(fd: 3, buf: 0x564b0db63660, count: 75994) 27.738 python3.5.post/17535 syscalls:sys_enter_write(fd: 3, buf: 0x564b0db4b1e0, count: 41635) 136.070 python3.5.post/17535 syscalls:sys_enter_write(fd: 3, buf: 0x564b0dbab510, count: 62232) # - Add a generator for x86's IRQ vectors -> strings - Introduce stroul() (string -> number) methods for the strarray and strarrays classes, also strtoul_flags, allowing to go from both strings and or-ed strings to numbers, allowing things like: # perf trace -e syscalls:sys_enter_mmap --filter="flags==DENYWRITE|PRIVATE|FIXED" sleep 1 0.000 sleep/22588 syscalls:sys_enter_mmap(addr: 0x7f42d2aa5000, len: 1363968, prot: READ|EXEC, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x22000) 0.011 sleep/22588 syscalls:sys_enter_mmap(addr: 0x7f42d2bf2000, len: 311296, prot: READ, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x16f000) 0.015 sleep/22588 syscalls:sys_enter_mmap(addr: 0x7f42d2c3f000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x1bb000) # Allowing to narrow down from the complete set of mmap calls for that workload: # perf trace -e syscalls:sys_enter_mmap sleep 1 0.000 sleep/22695 syscalls:sys_enter_mmap(len: 134773, prot: READ, flags: PRIVATE, fd: 3) 0.041 sleep/22695 syscalls:sys_enter_mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) 0.053 sleep/22695 syscalls:sys_enter_mmap(len: 1857472, prot: READ, flags: PRIVATE|DENYWRITE, fd: 3) 0.069 sleep/22695 syscalls:sys_enter_mmap(addr: 0x7fd23ffb6000, len: 1363968, prot: READ|EXEC, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x22000) 0.077 sleep/22695 syscalls:sys_enter_mmap(addr: 0x7fd240103000, len: 311296, prot: READ, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x16f000) 0.083 sleep/22695 syscalls:sys_enter_mmap(addr: 0x7fd240150000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x1bb000) 0.095 sleep/22695 syscalls:sys_enter_mmap(addr: 0x7fd240156000, len: 14272, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) 0.339 sleep/22695 syscalls:sys_enter_mmap(len: 217750512, prot: READ, flags: PRIVATE, fd: 3) # Works with all targets, so, for system wide, looking at who calls mmap with flags set to just "PRIVATE": # perf trace --max-events=5 -e syscalls:sys_enter_mmap --filter="flags==PRIVATE" 0.000 pool/2242 syscalls:sys_enter_mmap(len: 756, prot: READ, flags: PRIVATE, fd: 14) 0.050 pool/2242 syscalls:sys_enter_mmap(len: 756, prot: READ, flags: PRIVATE, fd: 14) 0.062 pool/2242 syscalls:sys_enter_mmap(len: 756, prot: READ, flags: PRIVATE, fd: 14) 0.145 goa-identity-s/2240 syscalls:sys_enter_mmap(len: 756, prot: READ, flags: PRIVATE, fd: 18) 0.183 goa-identity-s/2240 syscalls:sys_enter_mmap(len: 756, prot: READ, flags: PRIVATE, fd: 18) # # perf trace --max-events=2 -e syscalls:sys_enter_lseek --filter="whence==SET && offset != 0" 0.000 Cache2 I/O/12047 syscalls:sys_enter_lseek(fd: 277, offset: 43, whence: SET) 1142.070 mozStorage #5/12302 syscalls:sys_enter_lseek(fd: 44</home/acme/.mozilla/firefox/ina67tev.default/cookies.sqlite-wal>, offset: 393536, whence: SET) # perf annotate: - Fix objdump --no-show-raw-insn flag to work with goth gcc and clang. - Streamline objdump execution, preserving the right error codes for better reporting to user. perf report: - Add warning when libunwind not compiled in. perf stat: Jin Yao: - Support --all-kernel/--all-user, to match options available in 'perf record', asking that all the events specified work just with kernel or user events. perf list: Jin Yao: - Hide deprecated events by default, allow showing them with --deprecated. libbperf: Jiri Olsa: - Allow to build with -ltcmalloc. - Finish mmap interface, getting more stuff from tools/perf while adding abstractions to avoid pulling too much stuff, to get libperf to grow as tools needs things like auxtrace, etc. perf scripting engines: Steven Rostedt (VMware): - Iterate on tep event arrays directly, fixing script generation with '-g python' when having multiple tracepoints in a perf.data file. core: - Allow to build with -ltcmalloc. perf test: Leo Yan: - Report failure for mmap events. - Avoid infinite loop for task exit case. - Remove needless headers for bp_account test. - Add dedicated checking helper is_supported(). - Disable bp_signal testing for arm64. Vendor events: arm64: John Garry: - Fix Hisi hip08 DDRC PMU eventname. - Add some missing events for Hisi hip08 DDRC, L3C and HHA PMUs. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-22Merge branch 'perf/urgent' into perf/core, to pick up fixesIngo Molnar2-1/+6
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-17x86: xen: insn: Decode Xen and KVM emulate-prefix signatureMasami Hiramatsu3-0/+54
Decode Xen and KVM's emulate-prefix signature by x86 insn decoder. It is called "prefix" but actually not x86 instruction prefix, so this adds insn.emulate_prefix_size field instead of reusing insn.prefixes. If x86 decoder finds a special sequence of instructions of XEN_EMULATE_PREFIX and 'ud2a; .ascii "kvm"', it just counts the length, set insn.emulate_prefix_size and fold it with the next instruction. In other words, the signature and the next instruction is treated as a single instruction. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: x86@kernel.org Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Borislav Petkov <bp@alien8.de> Cc: xen-devel@lists.xenproject.org Cc: Randy Dunlap <rdunlap@infradead.org> Link: https://lkml.kernel.org/r/156777564986.25081.4964537658500952557.stgit@devnote2
2019-10-15tools arch x86: Grab a copy of the file containing the IRQ vector definesArnaldo Carvalho de Melo1-0/+146
We'll use it to generate a table and then convert the irq_vectors:* tracepoint 'vector' arg in things like perf trace, script, etc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-z7gi058lzhnrm32slevg3xod@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-10-15tools headers kvm: Sync kvm headers with the kernel sourcesArnaldo Carvalho de Melo1-0/+1
To pick the changes in: 0cb8410b90e7 ("kvm: svm: Intercept RDPRU") That trigger a rebuild in too in tooling: CC /tmp/build/perf/arch/x86/util/kvm-stat.o But this time around no changes in tooling results, as SVM_EXIT_RDPRU wasn't added to SVM_EXIT_REASONS, that is used in kvm-stat.c. And addresses this perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h' diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jim Mattson <jmattson@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/n/tip-pqzkt1hmfpqph3ts8i6zzmim@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-10-15tools headers kvm: Sync kvm headers with the kernel sourcesArnaldo Carvalho de Melo1-1/+5
To pick the changes in: bf653b78f960 ("KVM: vmx: Introduce handle_unexpected_vmexit and handle WAITPKG vmexit") That trigger these changes in tooling: CC /tmp/build/perf/arch/x86/util/kvm-stat.o INSTALL GTK UI DESCEND plugins make[3]: Nothing to be done for '/tmp/build/perf/plugins/libtraceevent-dynamic-list'. INSTALL trace_plugins LD /tmp/build/perf/arch/x86/util/perf-in.o LD /tmp/build/perf/arch/x86/perf-in.o LD /tmp/build/perf/arch/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf And this is not just because that header is included, kvm-stat.c uses the VMX_EXIT_REASONS define and it got changed by the above cset. And addresses this perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h' diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Tao Xu <tao3.xu@intel.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-gr1eel0hckmi5l3p2ewdpfxh@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-10-07tools arch x86: Grab a copy of the file containing the MSR numbersArnaldo Carvalho de Melo1-0/+857
We'll use it to generate a table and then convert the msr:{read,write}_msr 'msr' option in things like perf trace, script, etc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-y1f4s0y1s43d4drh7pd2huzn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-10-01x86/insn: Fix awk regexp warningsAlexander Kapshuk1-2/+2
gawk 5.0.1 generates the following regexp warnings: GEN /home/sasha/torvalds/tools/objtool/arch/x86/lib/inat-tables.c awk: ../arch/x86/tools/gen-insn-attr-x86.awk:260: warning: regexp escape sequence `\:' is not a known regexp operator awk: ../arch/x86/tools/gen-insn-attr-x86.awk:350: (FILENAME=../arch/x86/lib/x86-opcode-map.txt FNR=41) warning: regexp escape sequence `\&' is not a known regexp operator Ealier versions of gawk are not known to generate these warnings. The gawk manual referenced below does not list characters ':' and '&' as needing escaping, so 'unescape' them. See https://www.gnu.org/software/gawk/manual/html_node/Escape-Sequences.html for more info. Running diff on the output generated by the script before and after applying the patch reported no differences. [ bp: Massage commit message. ] [ Caught the respective tools header discrepancy. ] Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190924044659.3785-1-alexander.kapshuk@gmail.com
2019-09-30tools headers kvm: Sync kvm headers with the kernel sourcesArnaldo Carvalho de Melo4-2/+14
To pick the changes in: 200824f55eef ("KVM: s390: Disallow invalid bits in kvm_valid_regs and kvm_dirty_regs") 4a53d99dd0c2 ("KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode") 7396d337cfad ("KVM: x86: Return to userspace with internal error on unexpected exit reason") 92f35b751c71 ("KVM: arm/arm64: vgic: Allow more than 256 vcpus for KVM_IRQ_LINE") None of them trigger any changes in tooling, this time this is just to silence these perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h' diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h' diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h' diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Liran Alon <liran.alon@oracle.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Link: https://lkml.kernel.org/n/tip-akuugvvjxte26kzv23zp5d2z@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-20tools arch x86: Sync asm/cpufeatures.h with the kernel sourcesArnaldo Carvalho de Melo1-0/+3
To pick up the changes from: b4dd4f6e3648 ("x86/vmware: Add a header file for hypercall definitions") f36cf386e3fe ("x86/speculation/swapgs: Exclude ATOMs from speculation through SWAPGS") be261ffce6f1 ("x86: Remove X86_FEATURE_MFENCE_RDTSC") 018ebca8bd70 ("x86/cpufeatures: Enable a new AVX512 CPU feature") These don't cause any changes in tooling, just silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h To clarify, updating those files cause these bits of tools/perf to rebuild: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o INSTALL GTK UI LD /tmp/build/perf/bench/perf-in.o Those use just: $ grep FEATURE tools/arch/x86/lib/mem*.S tools/arch/x86/lib/memcpy_64.S: ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \ tools/arch/x86/lib/memcpy_64.S: "jmp memcpy_erms", X86_FEATURE_ERMS tools/arch/x86/lib/memset_64.S: ALTERNATIVE_2 "jmp memset_orig", "", X86_FEATURE_REP_GOOD, \ tools/arch/x86/lib/memset_64.S: "jmp memset_erms", X86_FEATURE_ERMS $ I.e. none of the feature defines added/removed by the patches above. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Gayatri Kammela <gayatri.kammela@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Hellstrom <thellstrom@vmware.com> Link: https://lkml.kernel.org/n/tip-pq63abgknsaeov23p80d8gjv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-20tools arch x86 uapi: Synch asm/unistd.h with the kernel sourcesArnaldo Carvalho de Melo1-1/+1
To pick up the change in: 45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long") That doesn't trigger any changes in tooling and silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/unistd.h' differs from latest version at 'arch/x86/include/uapi/asm/unistd.h' diff -u tools/arch/x86/include/uapi/asm/unistd.h arch/x86/include/uapi/asm/unistd.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-17Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu-feature updates from Ingo Molnar: - Rework the Intel model names symbols/macros, which were decades of ad-hoc extensions and added random noise. It's now a coherent, easy to follow nomenclature. - Add new Intel CPU model IDs: - "Tiger Lake" desktop and mobile models - "Elkhart Lake" model ID - and the "Lightning Mountain" variant of Airmont, plus support code - Add the new AVX512_VP2INTERSECT instruction to cpufeatures - Remove Intel MPX user-visible APIs and the self-tests, because the toolchain (gcc) is not supporting it going forward. This is the first, lowest-risk phase of MPX removal. - Remove X86_FEATURE_MFENCE_RDTSC - Various smaller cleanups and fixes * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) x86/cpu: Update init data for new Airmont CPU model x86/cpu: Add new Airmont variant to Intel family x86/cpu: Add Elkhart Lake to Intel family x86/cpu: Add Tiger Lake to Intel family x86: Correct misc typos x86/intel: Add common OPTDIFFs x86/intel: Aggregate microserver naming x86/intel: Aggregate big core graphics naming x86/intel: Aggregate big core mobile naming x86/intel: Aggregate big core client naming x86/cpufeature: Explain the macro duplication x86/ftrace: Remove mcount() declaration x86/PCI: Remove superfluous returns from void functions x86/msr-index: Move AMD MSRs where they belong x86/cpu: Use constant definitions for CPU models lib: Remove redundant ftrace flag removal x86/crash: Remove unnecessary comparison x86/bitops: Use __builtin_constant_p() directly instead of IS_IMMEDIATE() x86: Remove X86_FEATURE_MFENCE_RDTSC x86/mpx: Remove MPX APIs ...
2019-09-17Merge branch 'perf-core-for-linus' of ↵Linus Torvalds9-0/+2702
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Kernel side changes: - Improved kbprobes robustness - Intel PEBS support for PT hardware tracing - Other Intel PT improvements: high order pages memory footprint reduction and various related cleanups - Misc cleanups The perf tooling side has been very busy in this cycle, with over 300 commits. This is an incomplete high-level summary of the many improvements done by over 30 developers: - Lots of updates to the following tools: 'perf c2c' 'perf config' 'perf record' 'perf report' 'perf script' 'perf test' 'perf top' 'perf trace' - Updates to libperf and libtraceevent, and a consolidation of the proliferation of x86 instruction decoder libraries. - Vendor event updates for Intel and PowerPC CPUs, - Updates to hardware tracing tooling for ARM and Intel CPUs, - ... and lots of other changes and cleanups - see the shortlog and Git log for details" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (322 commits) kprobes: Prohibit probing on BUG() and WARN() address perf/x86: Make more stuff static x86, perf: Fix the dependency of the x86 insn decoder selftest objtool: Ignore intentional differences for the x86 insn decoder objtool: Update sync-check.sh from perf's check-headers.sh perf build: Ignore intentional differences for the x86 insn decoder perf intel-pt: Use shared x86 insn decoder perf intel-pt: Remove inat.c from build dependency list perf: Update .gitignore file objtool: Move x86 insn decoder to a common location perf metricgroup: Support multiple events for metricgroup perf metricgroup: Scale the metric result perf pmu: Change convert_scale from static to global perf symbols: Move mem_info and branch_info out of symbol.h perf auxtrace: Uninline functions that touch perf_session perf tools: Remove needless evlist.h include directives perf tools: Remove needless evlist.h include directives perf tools: Remove needless thread_map.h include directives perf tools: Remove needless thread.h include directives perf tools: Remove needless map.h include directives ...
2019-09-05riscv: Add support for libdwMao Han1-0/+42
This patch adds support for DWARF register mappings and libdw registers initialization, which is used by perf callchain analyzing when --call-graph=dwarf is given. Signed-off-by: Mao Han <han_mao@c-sky.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: linux-riscv <linux-riscv@lists.infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Guo Ren <guoren@kernel.org> Tested-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-01perf intel-pt: Use shared x86 insn decoderJosh Poimboeuf4-5/+5
Now that there's a common version of the decoder for all tools, use it instead of the local copy. Also use perf's check-headers.sh script to diff the decoder files to make sure they remain in sync with the kernel version. Objtool has a similar check. Committer notes: Had to keep this all pointing explicitely to x86 headers/files, i.e. instead of asm/isnn.h we had to use ../include/asm/insn.h when the files were in differemt dirs, or just replace "<asm/foo.h>" with "foo.h". This way we continue to be able to process perf.data files with Intel PT traces in distros other than x86. Also fixed up the awk script paths to use $(srcdir)/tools/arch instead or relative directories so that we keep detached tarballs (make help | grep perf) working. For now the include lines in these headers are being ignored so as not to flag false reports of kernel/tools out of sync. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/8a37e615d2880f039505d693d1e068a009358a2b.1567118001.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-01objtool: Move x86 insn decoder to a common locationJosh Poimboeuf8-0/+2699
The kernel tree has three identical copies of the x86 instruction decoder. Two of them are in the tools subdir. The tools subdir is supposed to be completely standalone and separate from the kernel. So having at least one copy of the kernel decoder in the tools subdir is unavoidable. However, we don't need *two* of them. Move objtool's copy of the decoder to a shared location, so that perf will also be able to use it. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/55b486b88f6bcd0c9a2a04b34f964860c8390ca8.1567118001.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 11:02:42 +0300