summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2014-02-20ALSA: hda - Enable front audio jacks on one HP desktop modelHui Wang1-0/+13
The front headphone and mic jackes on a HP desktop model (Vendor Id: 0x111d76c7 Subsystem Id: 0x103c2b17) can not work, the codec on this machine has 8 physical ports, 6 of them are routed to rear jackes and all of them work very well, while the remaining 2 ports are routed to front headphone and mic jackes, but the corresponding pin complex node are not defined correctly. After apply this fix, the front audio jackes can work very well. [trivial fix of enum definition by tiwai] BugLink: https://bugs.launchpad.net/bugs/1282369 Cc: David Henningsson <david.henningsson@canonical.com> Tested-by: Gerald Yang <gerald.yang@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-20Merge tag 'asoc-v3.14-rc3' of ↵Takashi Iwai14-82/+89
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.14 A few fixes, all driver speccific ones. The DaVinci ones aren't as clear as they should be from the subject lines on the commits but they fix issues which will prevent correct operation in some use cases and only affect that particular driver so are reasonably safe.
2014-02-19ALSA: hda/ca0132 - Fix recording from mode id 0x8Hsin-Yu Chao1-3/+1
Incorrect ADC is picked in ca0132_capture_pcm_prepare(), where it assumes multiple streams while there is one stream per ADC. Note that ca0132_capture_pcm_cleanup() already does the right thing. The Chromebook Pixel has a microphone under the keyboard that is attached to node id 0x8. Before this fix, recording would always go to the main internal mic (node id 0x7). Signed-off-by: Hsin-Yu Chao <hychao@chromium.org> Reviewed-by: Dylan Reid <dgreid@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-19ALSA: hda/ca0132 - setup/cleanup streamsHsin-Yu Chao1-59/+7
When a HDMI stream is opened with the same stream tag as a following opened stream to ca0132, audio will be heard from two ports simultaneously. Fix this issue by change to use snd_hda_codec_setup_stream and snd_hda_codec_cleanup_stream instead, so that an inactive stream can be marked as 'dirty' when found with a conflict stream tag, and then get purified. Signed-off-by: Hsin-Yu Chao <hychao@chromium.org> Reviewed-by: Chih-Chung Chang <chihchung@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-19Merge remote-tracking branch 'asoc/fix/wm8993' into asoc-linusMark Brown1-1/+0
2014-02-19Merge remote-tracking branches 'asoc/fix/blackfin', 'asoc/fix/da9055', ↵Mark Brown13-81/+89
'asoc/fix/davinci', 'asoc/fix/fsl', 'asoc/fix/fsl-esai', 'asoc/fix/max98090', 'asoc/fix/rt5640', 'asoc/fix/samsung' and 'asoc/fix/txx9aclc-ac97' into asoc-linus
2014-02-18ALSA: hda - add headset mic detect quirks for two Dell laptopsHui Wang1-0/+2
When we plug a 3-ring headset on the Dell machines (Vendor ID: 0x10ec0255, Subsystem ID: 0x10280657; Vendor ID: 0x10ec0255, Subsystem ID: 0x1028065f), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1260303 Cc: David Henningsson <david.henningsson@canonical.com> Tested-by: Cyrus Lien <cyrus.lien@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-17ALSA: usb-audio: work around KEF X300A firmware bugClemens Ladisch1-0/+9
When the driver tries to access Function Unit 10, the KEF X300A speakers' firmware apparently locks up, making even PCM streaming impossible. Work around this by ignoring this FU. Cc: <stable@vger.kernel.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-16ASoC: max98090: make REVISION_ID readableStephen Warren1-0/+1
The REVISION_ID register is not currently marked readable. snd_soc_read() refuses to read the register, and hence probe() fails. Fixes: d4807ad2c4c0 ("regmap: Check readable regs in _regmap_read") [exposed the bug, by checking for readability] Fixes: 685e42154dcf ("ASoC: Replace max98090 Device Driver") [left out this register from the readable list] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-16ASoC: txx9aclc_ac97: Fix kernel crash on probeAlexander Shiyan1-3/+5
This patch fixes a crash caused by commit 3bed3344c826 (ASoC: txx9aclc_ac97: Convert to devm_ioremap_resource()). This is an attempt to assign "drvdata->base" while memory for "drvdata" is not already allocated. Fixes: 3bed3344c826 (ASoC: txx9aclc_ac97: Convert to devm_ioremap_resource()) Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-02-12ASoC: max98090: sync regcache on entering STANDBYDylan Reid1-10/+10
Sync regcache when entering STANDBY from OFF. ON isn't entered with OFF as the current state, so the registers were not being re-synced after suspend/resume. The 98088 and 98095 already call regcache_sync from STANDBY. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-02-12ALSA: Revert "ALSA: hda/realtek - Avoid invalid COEFs for ALC271X"Martin Kepplinger1-3/+0
This reverts commit d3c56568f43807135f2c2a09582a69f809f0d8b7. The reverted commit breaks audio through headphone line out on the Acer TravelMate B113 (Type1Sku0) Notebook, my main work machine. I don't know much about it but this fixes my problem. Bisected and tested. Fixes: d3c56568f438 ('ALSA: hda/realtek - Avoid invalid COEFs for ALC271X') Cc: <stable@vger.kernel.org> Tested-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-12ASoC: blackfin: Fix machine driver Kconfig dependenciesLars-Peter Clausen1-6/+5
Since the machine driver selects the CODEC driver we need to make sure that the machine driver is only selectable if the CODEC driver can be build. This avoids build errors under some configurations (which typically only result from randconfig). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-10ASoC: da9055: Fix device registration of PMIC and CODEC devicesAdam Thomson1-2/+9
Currently the I2C device Ids conflict for the MFD and CODEC so cannot be both instantiated on one platform. This patch updates the Ids and names to make them unique from each other. It should be noted that the I2C addresses for both PMIC and CODEC are modifiable so instantiation of the two are kept as separate devices, rather than instantiating the CODEC from the MFD code. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-02-10ASoC: fsl-esai: fix ESAI TDM slot settingXiubo Li2-3/+3
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Acked-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-10ASoC: fsl: fix pm support of machine driversShawn Guo3-9/+13
The commit 1abe729 (ASoC: fsl: Add missing pm to current machine drivers) enables pm support for a few IMX machine drivers. But it does not update dev drvdata to be the pointer to 'card'. This causes the kernel dump below in system suspend, because snd_soc_suspend() expects that the dev drvdata points to 'card', while it still points to the private data of machine driver. This patch fixes imx-sgtl5000 and imx-wm8962 by attaching 'card' to dev drvdata and private data to card drvdata. For imx-mc13783, I simply revert the pm change because it must be broken for the same reason and I don't have hardware to test pm enabling code. $ echo mem > /sys/power/state PM: Syncing filesystems ... done. PM: Preparing system for mem sleep mmc1: card e624 removed Freezing user space processes ... (elapsed 0.002 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. PM: Entering mem sleep INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 1861 Comm: bash Not tainted 3.14.0-rc1+ #1648 Backtrace: [<80012144>] (dump_backtrace) from [<800122e4>] (show_stack+0x18/0x1c) r6:8079c77c r5:00000c5a r4:00000000 r3:00000000 [<800122cc>] (show_stack) from [<80637ac0>] (dump_stack+0x78/0x94) [<80637a48>] (dump_stack) from [<80028918>] (warn_slowpath_common+0x6c/0x8c) r4:bdb21c38 r3:be62df00 [<800288ac>] (warn_slowpath_common) from [<800289dc>] (warn_slowpath_fmt+0x38/0x40) r8:be62e3a8 r7:bf122960 r6:00000005 r5:00000000 r4:00000000 [<800289a8>] (warn_slowpath_fmt) from [<8006518c>] (__lock_acquire+0x1ae0/0x1ce0) r3:8079d598 r2:80799e70 [<800636ac>] (__lock_acquire) from [<80065894>] (lock_acquire+0x68/0x7c) r10:bdb20000 r9:be62df00 r8:00000000 r7:00000000 r6:60000013 r5:bdb20000 r4:00000000 [<8006582c>] (lock_acquire) from [<8063c938>] (mutex_lock_nested+0x5c/0x3b8) r7:00000000 r6:80dfc78c r5:804be444 r4:bf122928 [<8063c8dc>] (mutex_lock_nested) from [<804be444>] (snd_soc_suspend+0x34/0x42c) r10:00000000 r9:00000000 r8:00000000 r7:bf1c4444 r6:bf1c4410 r5:be978150 r4:be978010 [<804be410>] (snd_soc_suspend) from [<8034392c>] (platform_pm_suspend+0x34/0x64) r10:00000000 r8:00000000 r7:bf1c4444 r6:bf1c4410 r5:803438f8 r4:bf1c4410 [<803438f8>] (platform_pm_suspend) from [<80348e18>] (dpm_run_callback.isra.7+0x34/0x6c) [<80348de4>] (dpm_run_callback.isra.7) from [<80349354>] (__device_suspend+0x10c/0x220) r9:808dd974 r8:808c4a5c r6:00000002 r5:80e5001c r4:bf1c4410 [<80349248>] (__device_suspend) from [<8034a338>] (dpm_suspend+0x60/0x220) r7:bf1c4410 r6:808dd90c r5:80e5001c r4:bf1c44c0 [<8034a2d8>] (dpm_suspend) from [<8034a790>] (dpm_suspend_start+0x60/0x68) r10:8079a818 r9:00000000 r8:00000004 r7:80dfbe90 r6:80641eec r5:00000000 r4:00000002 [<8034a730>] (dpm_suspend_start) from [<8006a788>] (suspend_devices_and_enter+0x74/0x318) r4:00000003 r3:80dfbe98 [<8006a714>] (suspend_devices_and_enter) from [<8006abd8>] (pm_suspend+0x1ac/0x244) r10:8079a818 r8:00000004 r7:00000003 r6:80641eec r5:00000000 r4:00000003 [<8006aa2c>] (pm_suspend) from [<80069a4c>] (state_store+0x70/0xc0) r5:00000003 r4:bd85ea40 [<800699dc>] (state_store) from [<80294034>] (kobj_attr_store+0x1c/0x28) r10:beb9fe08 r8:00000000 r7:bdb21f78 r6:bd85ea40 r5:00000004 r4:beb9fe00 [<80294018>] (kobj_attr_store) from [<80140f90>] (sysfs_kf_write+0x54/0x58) [<80140f3c>] (sysfs_kf_write) from [<8014474c>] (kernfs_fop_write+0xc4/0x160) r6:bd85ea40 r5:beb9fe00 r4:00000004 r3:80140f3c [<80144688>] (kernfs_fop_write) from [<800dfa14>] (vfs_write+0xbc/0x184) r10:00000000 r9:00000000 r8:00000000 r7:bdb21f78 r6:00500c08 r5:00000004 r4:be782600 [<800df958>] (vfs_write) from [<800dfe00>] (SyS_write+0x48/0x70) r10:00000000 r8:00000000 r7:00000004 r6:00500c08 r5:00000000 r4:be782600 [<800dfdb8>] (SyS_write) from [<8000e800>] (ret_fast_syscall+0x0/0x48) r9:bdb20000 r8:8000e9c4 r7:00000004 r6:00500c08 r5:00000004 r4:76eb65e0 Fixes: 1abe729 (ASoC: fsl: Add missing pm to current machine drivers) Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-10ALSA: hda - Fix undefined symbol due to builtin/module mixupTakashi Iwai1-15/+15
Even after the fix for leftover kconfig handling (commit f8f1becf), the current code still doesn't handle properly the builtin/module mixup case between the core snd-hda-codec and other codec drivers. For example, when CONFIG_SND_HDA_INTEL=y and CONFIG_SND_HDA_CODEC_HDMI=m, it'll end up with an unresolved symbol snd_hda_parse_hdmi_codec. This patch fixes the issue. Now codec->parser points to the parser object *only* when a module (either generic or HDMI parser) is loaded and bound. When a builtin symbol is used, codec->parser still points to NULL. This is the difference from the previous versions. Fixes: f8f1becfa4ac ('ALSA: hda - Fix leftover ifdef checks after modularization') Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-07ASoC: rt5640: Add ACPI ID for Intel BaytrailJarkko Nikula1-0/+1
Realtek RT5640 uses ACPI ID "10EC5640" for Intel Baytrail platforms. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-02-07ALSA: hda - Fix mic capture on Sony VAIO Pro 11Takashi Iwai1-0/+1
The very same fixup is needed to make the mic on Sony VAIO Pro 11 working as well as VAIO Pro 13 model. Reported-and-tested-by: Hendrik-Jan Heins <hjheins@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-07ALSA: hda - Add a headset quirk for Dell XPS 13David Henningsson1-0/+1
This quirk is needed for the headset microphone to work. Alsa-info at http://www.alsa-project.org/db/?f=8c7dfe857ceff462ca2de133e67023c0f68de9cb Cc: stable@vger.kernel.org (3.10+) Reported-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-07ALSA: hda - Fix inconsistent Mic mute LEDTakashi Iwai6-18/+31
The current code for controlling mic mute LED in patch_sigmatel.c blindly assumes that there is a single capture switch. But, there can be multiple multiple ones, and each of them flips the state, ended up in an inconsistent state. For fixing this problem, this patch adds kcontrol to be passed to the hook function so that the callee can check which switch is being accessed. In stac_capture_led_hook(), the state is checked as a bitmask, and turns on the LED when all capture switches are off. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-07ALSA: hda - Fix leftover ifdef checks after modularizationTakashi Iwai2-4/+4
Since the commit [595fe1b702c3: ALSA: hda - Make CONFIG_SND_HDA_CODEC_* tristate], the kconfig variables for the generic parser and codec drivers can be "m" instead of boolean, but some codes are left unchanged to check only #ifdef CONFIG_SND_HDA_CODEC_XXX, which is no longer true for modules. This patch fixes them by replacing with IS_ENABLED() macros. Fixes: 595fe1b702c3 ('ALSA: hda - Make CONFIG_SND_HDA_CODEC_* tristate') Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70161 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-05ALSA: hda - Improve loopback path lookups for AD1983Takashi Iwai1-0/+7
AD1983 has flexible loopback routes and the generic parser would take wrong path confusingly instead of taking individual paths via NID 0x0c and 0x0d. For avoiding it, limit the connections at these widgets so that the parser can think more straightforwardly. This fixes the regression of the missing line-in loopback on Dell machine. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70011 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-05ALSA: hda - Fix missing VREF setup for Mac Pro 1,1Takashi Iwai1-1/+8
Mac Pro 1,1 with ALC889A codec needs the VREF setup on NID 0x18 to VREF50, in order to make the speaker working. The same fixup was already needed for MacBook Air 1,1, so we can reuse it. Reported-by: Nicolai Beuermann <mail@nico-beuermann.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-05ALSA: hda - Add missing mixer widget for AD1983Takashi Iwai1-0/+1
The mixer widget on AD1983 at NID 0x0e was missing in the commit [f2f8be43c5c9: ALSA: hda - Add aamix NID to AD codecs]. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70011 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-05ALSA: hda/realtek - Avoid invalid COEFs for ALC271XTakashi Iwai1-0/+3
We've seen often problems after suspend/resume on Acer Aspire One AO725 with ALC271X codec as reported in kernel bugzilla, and it turned out that some COEFs doesn't work and triggers the codec communication stall. Since these magic COEF setups are specific to ALC269VB for some PLL configurations, the machine works even without these manual adjustment. So, let's simply avoid applying them for ALC271X. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52181 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-04ALSA: hda - Fix silent output on Toshiba Satellite L40Takashi Iwai1-0/+19
Toshiba Satellite L40 with AD1986A codec requires the EAPD of NID 0x1b to be constantly on, otherwise the output doesn't work. Unlike most of other AD1986A machines, EAPD is correctly implemented in HD-audio manner (that is, bit set = amp on), so we need to clear the inv_eapd flag in the fixup, too. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=67481 Cc: <stable@vger.kernel.org> [v3.11+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-03ALSA: usb-audio: Add missing kconfig dependecyTakashi Iwai1-0/+1
The commit 44dcbbb1cd61 introduced the usage of bitreverse helpers but forgot to add the dependency. This patch adds the selection for CONFIG_BITREVERSE. Fixes: 44dcbbb1cd61 ('ALSA: snd-usb: add support for bit-reversed byte formats') Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-01Merge tag 'sound-fix-3.14-rc1' of ↵Linus Torvalds31-565/+934
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "The big chunks here are the updates for oxygen driver for Xonar DG devices, which were slipped from the previous pull request. They are device-specific and thus not too dangerous. Other than that, all patches are small bug fixes, mainly for Samsung build fixes, a few HD-audio enhancements, and other misc ASoC fixes. (And this time ASoC merge is less than Octopus, lucky seven :)" * tag 'sound-fix-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (42 commits) ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabled ALSA: hda - add headset mic detect quirks for another Dell laptop ALSA: oxygen: Xonar DG(X): cleanup and minor changes ALSA: oxygen: Xonar DG(X): modify high-pass filter control ALSA: oxygen: Xonar DG(X): modify input select functions ALSA: oxygen: Xonar DG(X): modify capture volume functions ALSA: oxygen: Xonar DG(X): use headphone volume control ALSA: oxygen: Xonar DG(X): modify playback output select ALSA: oxygen: Xonar DG(X): capture from I2S channel 1, not 2 ALSA: oxygen: Xonar DG(X): move the mixer code into another file ALSA: oxygen: modify CS4245 register dumping function ALSA: oxygen: modify adjust_dg_dac_routing function ALSA: oxygen: Xonar DG(X): modify DAC/ADC parameters function ALSA: oxygen: Xonar DG(X): modify initialization functions ALSA: oxygen: Xonar DG(X): add new CS4245 SPI functions ALSA: oxygen: additional definitions for the Xonar DG/DGX card ALSA: oxygen: change description of the xonar_dg.c file ALSA: oxygen: export oxygen_update_dac_routing symbol ALSA: oxygen: add mute mask for the OXYGEN_PLAY_ROUTING register ALSA: oxygen: modify the SPI writing function ...
2014-01-31ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabledStephen Warren1-4/+36
Commit 384a48d71520 "ALSA: hda: HDMI: Support codecs with fewer cvts than pins" dynamically enabled each pin widget's PIN_OUT only when the pin was actively in use. This was required on certain NVIDIA CODECs for correct operation. Specifically, if multiple pin widgets each had their mux input select the same audio converter widget and each pin widget had PIN_OUT enabled, then only one of the pin widgets would actually receive the audio, and often not the one the user wanted! However, this apparently broke some Intel systems, and commit 6169b673618b "ALSA: hda - Always turn on pins for HDMI/DP" reverted the dynamic setting of PIN_OUT. This in turn broke the afore-mentioned NVIDIA CODECs. This change supports either dynamic or static handling of PIN_OUT, selected by a flag set up during CODEC initialization. This flag is enabled for all recent NVIDIA GPUs. Reported-by: Uosis <uosisl@gmail.com> Cc: <stable@vger.kernel.org> # v3.13 Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-31ASoC: davinci-evm: Add pm callbacks to platform driverPeter Ujfalusi1-0/+1
Set snd_soc_pm_ops for the pm ops. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-31ASoC: davinci-mcasp: Consolidate pm_runtime_get/put() use in the driverPeter Ujfalusi1-14/+9
The use of pm_runtime in trigger() callback is not correct and it will lead to unbalanced power.usage_count. The only place which might need to call pm_runtime is the set_fmt callback. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-31ASoC: davinci-mcasp: Configure xxTDM, xxFMT and xxFMCT registers synchronouslyPeter Ujfalusi1-29/+27
These registers can be configured synchronously for playback and capture. Furthermore when McASP is in master and sync mode the capture operation needs the TX path to be configured in order to be able to provide the needed clocks for the bus. xxFMT and xxFMCT registers has been already configured for both TX and RX other places in the driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-31ASoC: davinci-mcasp: Harmonize the sub hw_params function namesPeter Ujfalusi1-6/+6
Instead of davinci_hw_common_param - for common, I2S/DIT mode settings davinci_hw_dit_param - for DIT protocol configuration davinci_hw_param - for I2S (and compatible protocols) Use the following names: mcasp_common_hw_param, mcasp_dit_hw_param and mcasp_i2s_hw_param. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-30ASoC: samsung: Fix trivial typoSachin Kamat1-2/+2
Changed Sat -> Say. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-30ASoC: samsung: Remove invalid dependenciesSachin Kamat1-1/+1
These symbols got eliminated when non-DT support for Exynos was removed. Remove them. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-30ALSA: hda - add headset mic detect quirks for another Dell laptopHui Wang1-0/+1
When we plug a 3-ring headset on the Dell machine (Vendor ID: 0x10ec0255, Subsystem ID: 0x1028064d), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1260303 Cc: David Henningsson <david.henningsson@canonical.com> Tested-by: Doro Wu <fan-cheng.wu@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-30Merge branch 'xonar-dg' of git://git.alsa-project.org/alsa-kprivate into ↵Takashi Iwai9-501/+713
for-next This completes the hardware support for the Asus Xonar DG/DGX cards, and makes them actually usable. This is v4 of Roman's patch set with some small formatting changes.
2014-01-30Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-1/+27
Pull slave-dma updates from Vinod Koul: - new driver for BCM2835 used in R-pi - new driver for MOXA ART - dma_get_any_slave_channel API for DT based systems - minor fixes and updates spread acrooss driver [ The fsl-ssi dual fifo mode support addition clashed badly with the other changes to fsl-ssi that came in through the sound merge. I did a very rough cut at fixing up the conflict, but Nicolin Chen (author of both sides) will need to verify and check things ] * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits) dmaengine: mmp_pdma: fix mismerge dma: pl08x: Export pl08x_filter_id acpi-dma: align documentation with kernel-doc format dma: fix vchan_cookie_complete() debug print DMA: dmatest: extend the "device" module parameter to 32 characters drivers/dma: fix error return code dma: omap: Set debug level to debugging messages dmaengine: fix kernel-doc style typos for few comments dma: tegra: add support for Tegra148/124 dma: dw: use %pad instead of casting dma_addr_t dma: dw: join split up messages dma: dw: fix style of multiline comment dmaengine: k3dma: fix sparse warnings dma: pl330: Use dma_get_slave_channel() in the of xlate callback dma: pl330: Differentiate between submitted and issued descriptors dmaengine: sirf: Add device_slave_caps interface DMA: Freescale: change BWC from 256 bytes to 1024 bytes dmaengine: Add MOXA ART DMA engine driver dmaengine: Add DMA_PRIVATE to BCM2835 driver dma: imx-sdma: Assign a default script number for ROM firmware cases ...
2014-01-29ALSA: oxygen: Xonar DG(X): cleanup and minor changesRoman Volkov3-33/+11
Remove old SPI control functions, change anti-pop init sequence, remove some garbage from structures. The 'Apply' functions must be called at the mixer initialization, otherwise mixer settings sometimes will not be applied at startup. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: Xonar DG(X): modify high-pass filter controlRoman Volkov1-2/+6
Change the 'put' function of the high-pass filter control to use the new SPI functions. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: Xonar DG(X): modify input select functionsRoman Volkov2-25/+30
First of all, we should not touch the GPIOs. They are not for selecting the capture source, but they seems just enable the whole audio input curcuit. The 'put' function calls the 'apply' functions to change register values. Change the order of capture sources. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: Xonar DG(X): modify capture volume functionsRoman Volkov2-8/+26
Modify the input_vol_* functions to use the new SPI routines, There is a new applying function that will be called when the capture source changed. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: Xonar DG(X): use headphone volume controlRoman Volkov1-32/+83
I tried both variants: volume control and impedance selector. In the first case one minus is that we can't change the volume of multichannel output without additional software volume control. However, I am using this variant for the last three months and this seems good. All multichannel speaker systems have internal amplifier with the volume control included, but not all headphones have this regulator. In the second case, my software volume control does not save the value after reboot. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: Xonar DG(X): modify playback output selectRoman Volkov3-33/+47
Change the order of elements in the output select control. This will reduce the number of relay switches. Change 'put' function to call the oxygen_update_dac_routing() function. Otherwise multichannel playback does not work. Also there is a new function to apply settings, this prevents from duplicating the code. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: Xonar DG(X): capture from I2S channel 1, not 2Roman Volkov1-1/+1
Actually CS4245 connected to the I2S channel 1 for capture, not channel 2. Otherwise capturing and playback does not work for CS4245. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: Xonar DG(X): move the mixer code into another fileRoman Volkov4-364/+411
Moving the mixer code away makes things easier. The mixer will control the driver, so the functions of the driver need to be non-static. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: modify CS4245 register dumping functionRoman Volkov1-3/+4
Change the function to read the data from the new shadow buffer. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: modify adjust_dg_dac_routing functionRoman Volkov2-24/+22
When selecting the audio output destinations (headphones, FP headphones, multichannel output), the channel routing should be changed depending on what destination selected. Also unnecessary I2S channels are digitally muted. This function called when the user selects the destination in the ALSA mixer. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29ALSA: oxygen: Xonar DG(X): modify DAC/ADC parameters functionRoman Volkov1-20/+38
When selecting the audio sample rate for CS4245, the MCLK divider should also be changed. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 09:46:49 +0300