summaryrefslogtreecommitdiff
path: root/sound/usb/line6
AgeCommit message (Collapse)AuthorFilesLines
2015-07-14ALSA: line6: Fix -EBUSY error during active monitoringTakashi Iwai1-7/+2
When a monitor stream is active, the next PCM stream access results in EBUSY error because of the check in line6_stream_start(). Fix this by just skipping the submission of pending URBs when the stream is already running instead. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101431 Cc: <stable@vger.kernel.org> # v4.0+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-05ALSA: line6: Clamp values correctlyTakashi Iwai1-3/+3
The usages of clamp() macro in sound/usb/line6/playback.c are just wrong, the low and high values are swapped. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-12ALSA: line6: Improve line6_read/write_data() interfacesChris Rorvick2-8/+14
The address cannot be negative so make it unsigned. Also, an unsigned int is always sufficient for the length, so no need to overdo it with a size_t. Finally, add in range checks to see if the values passed in actually fit where they are used. Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11ALSA: line6: toneport: Use explicit type for firmware versionChris Rorvick1-1/+1
The firmware version is a single byte so have the variable type agree. Since the address to this member is passed to the read function, using an int is not even portable. Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11ALSA: line6: Use explicit type for serial numberChris Rorvick4-5/+5
The serial number (aka ESN) is a 32-bit value. Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11ALSA: line6: Return EIO if read/write not successfulChris Rorvick1-2/+2
Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11ALSA: line6: Return error if device not respondingChris Rorvick1-6/+23
Put an upper bound on how long we will wait for the device to respond to a read/write request (i.e., 100 milliseconds) and return an error if this is reached. Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11ALSA: line6: Add delay before reading statusChris Rorvick1-0/+6
The device indicates the result of a read/write operation by making the status available on a subsequent request from the driver. This is not ready immediately, though, so the driver is currently slamming the device with hundreds of pointless requests before getting the expected response. Add a two millisecond delay before each attempt. This is approximately the behavior observed with version 4.2.7.1 of the Windows driver. Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-08ALSA: line6: Pass driver name to line6_probe()Chris Rorvick6-7/+7
Provide a unique name for each driver instead of using "line6usb" for all of them. This will allow for different configurations based on the driver type. Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-08ALSA: line6: Pass toneport pointer to toneport_has_led()Chris Rorvick1-7/+12
It is unlikely this function would ever be used in a context without a pointer to a `struct usb_line6_toneport', so grab the device type from it rather than having the caller do it. Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-08ALSA: line6: Add toneport_has_source_select()Chris Rorvick1-16/+16
Add a predicate for testing if the device supports source selection to make the conditional logic around this a bit cleaner. Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-06ALSA: line6: Get rid of unused variable in pod.cTakashi Iwai1-1/+0
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-06ALSA: line6: Create sysfs via snd_card_add_dev_attr()Takashi Iwai1-25/+13
Use the new helper function to create sysfs entries in the card more gracefully without races. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-03ALSA: line6: fixup of line6_start_timer argument typeNicholas Mc Guire2-2/+2
line6_start_timer passes an unsigned int as argument to be used in mod_timer which is then used by mod_timer as unsigned long, this just fixes up the argument type. This change helps make static code checkers happy. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-03ALSA: line6: use msecs_to_jiffies for conversionNicholas Mc Guire1-1/+1
This is only an API consolidation and should make things more readable it replaces var * HZ / 1000 by msecs_to_jiffies(var). Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-01ALSA: line6: Remove unused line6_midibuf_skip_message()Chris Rorvick2-13/+0
Use of this function ended with commits 3e58c868db1d ("staging: line6: drop midi_mask_receive") and af89d2897a71 ("staging: line6: drop midi_mask_transmit".) [Removed the corresponding line in midibuf.h, too -- tiwai] Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-01ALSA: line6: Remove unused line6_midibuf_status()Chris Rorvick2-8/+0
This function has not been used since merging the driver into the kernel (and a good while before that.) [Removed the corresponding line in midibuf.h, too -- tiwai] Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Remove snd_line6_ prefix of pcm property fieldsTakashi Iwai6-20/+18
It's just superfluous and doesn't give any better readability. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Remove invalid capability bits for PODxt Live VariaxTakashi Iwai1-3/+1
PODxt Live Variax doesn't have PCM and HWMON but only MIDI. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Remove struct usb_line6_podhdTakashi Iwai1-6/+1
It's identical with struct usb_line6. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Move the contents of usbdefs.h into driver.hTakashi Iwai9-34/+16
Most of them are rather relevant with the definitions in driver.h, and there are only a few lines, so just rip it off. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Remove revision.hTakashi Iwai2-5/+0
The definition is no longer used. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Tidy up and typo fixes in commentsTakashi Iwai8-174/+65
Just reformatting the comments and typos fixed, no functional changes. Particularly, - avoid the kerneldoc marker "/**", - reduce multiple comment lines into single lines, - corrected wrongly referred function names Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Fix volume calculation for big-endianTakashi Iwai1-9/+14
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Handle error from line6_pcm_acquire()Takashi Iwai2-6/+20
Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Make common PCM pointer callbackTakashi Iwai4-20/+12
Both playback and capture callbacks are identical, so let's merge them. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Reorganize PCM stream handlingTakashi Iwai7-425/+252
The current code deals with the stream start / stop solely via line6_pcm_acquire() and line6_pcm_release(). This was (supposedly) intended to avoid the races, but it doesn't work as expected. The concurrent acquire and release calls can be performed without proper protections, thus this might result in memory corruption. Furthermore, we can't take a mutex to protect the whole function because it can be called from the PCM trigger callback that is an atomic context. Also spinlock isn't appropriate because the function allocates with kmalloc with GFP_KERNEL. That is, these function just lead to singular problems. This is an attempt to reduce the existing races. First off, separate both the stream buffer management and the stream URB management. The former is protected via a newly introduced state_mutex while the latter is protected via each line6_pcm_stream lock. Secondly, the stream state are now managed in opened and running bit flags of each line6_pcm_stream. Not only this a bit clearer than previous combined bit flags, this also gives a better abstraction. These rewrites allows us to make common hw_params and hw_free callbacks for both playback and capture directions. For the monitor and impulse operations, still line6_pcm_acquire() and line6_pcm_release() are used. They call internally the corresponding functions for both playback and capture streams with proper lock or mutex. Unlike the previous versions, these function don't take the bit masks but the only single type value. Also they are supposed to be applied only as duplex operations. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Clear prev_fbuf and prev_fsize properlyTakashi Iwai2-7/+7
Clearing prev_fsize in line6_pcm_acquire() is pretty racy. This can be called at any time while the stream is being played. Rather better to clear prev_fbuf and prev_fsize at the proper place like the stream stop for capture, and just after copying the monitor / impulse data inside the spinlock. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Fix racy loopback handlingTakashi Iwai2-20/+24
The impulse and monitor handling in submit_audio_out_urb() isn't protected thus this can be racy with the capture stream handling. This patch extends the range to protect via each stream's spinlock (now the whole submit_audio_*_urb() are covered), and take the capture stream lock additionally for the impulse and monitor handling part. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Minor tidy up in line6_probe()Takashi Iwai1-11/+9
Move the check of multi configurations before snd_card_new() as a short path, and reduce superfluous pointer references. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Let snd_card_new() allocate private dataTakashi Iwai6-45/+20
Instead of allocating the private data individually in each driver's probe at first, let snd_card_new() allocate the data that is called in line6_probe(). This simplifies the primary probe functions. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Drop interface argument from private_init and disconnect callbacksTakashi Iwai6-30/+31
The interface argument is used just for retrieving the assigned device, which can be already found in line6->ifcdev. Drop them from the callbacks. Also, pass the usb id to private_init so that the driver can deal with it there. This is a preliminary work for the further cleanup to move the whole allocation into driver.c. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Skip volume manipulation during silence copyingTakashi Iwai1-2/+3
A minor optimization; while pausing, the driver just copies the zero that doesn't need any volume changes. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Do clipping in volume / monitor manipulationsTakashi Iwai1-3/+7
Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Consolidate PCM stream buffer allocation and freeTakashi Iwai5-38/+29
The PCM stream buffer allocation and free are identical for both playback and capture streams. Provide single helper functions. These are used only in pcm.c, thus they can be even static. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Use dev_err()Takashi Iwai1-1/+2
This is the last remaining snd_printk() usage in this driver. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Consolidate URB unlink and sync helpersTakashi Iwai5-133/+69
The codes to unlink and sync URBs are identical for both playback and capture streams. Consolidate to single helper functions. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Rearrange PCM structureTakashi Iwai4-208/+142
Introduce a new line6_pcm_stream structure and group individual fields of snd_line6_pcm struct to playback and capture groups. This patch itself just does rename and nothing else. More meaningful cleanups based on these fields shuffling will follow. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Drop voodoo workaroundsTakashi Iwai2-24/+0
If the problem still really remains, we should fix it instead of papering over it like this... Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Use incremental loopTakashi Iwai3-11/+11
Using a decremental loop without particular reasons worsens the readability a lot. Use incremental loops instead. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Drop superfluous spinlock for triggerTakashi Iwai2-22/+6
The trigger callback is already spinlocked, so we need no more lock here (even for the linked substreams). Let's drop it. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Fix the error recovery in line6_pcm_acquire()Takashi Iwai1-6/+6
line6_pcm_acquire() tries to restore the newly obtained resources at the error path. But some flags aren't recorded and released properly when the corresponding buffer is already present. These bits have to be cleared in the error recovery, too. Also, "flags_final" can be initialized to zero since we pass only the subset of "channels" bits. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Use logical ORTakashi Iwai1-2/+2
Fixed a few places using bits OR wrongly for condition checks. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Fix missing error handling in line6_pcm_acquire()Takashi Iwai1-1/+2
Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Reduce superfluous spinlock in midi.cTakashi Iwai2-18/+7
The midi_transmit_lock is used always inside the send_urb_lock, thus it doesn't play any role. Let's kill it. Also, rename "send_urb_lock" as a more simple name "lock" since this is the only lock for midi. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Remove unused line6_nop_read()Takashi Iwai2-12/+0
The function isn't used any longer after rewriting from sysfs to leds class in toneport.c. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Fix memory leak at probe error pathTakashi Iwai1-29/+30
Fix memory leak at probe error path by rearranging the call order in line6_destruct() so that the common destructor is always called. Also this simplifies the error path to a single goto label. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Minor refactoringTakashi Iwai1-45/+49
Split some codes in the lengthy line6_probe(). Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6/toneport: Implement LED controls via LED classTakashi Iwai2-74/+91
Instead of non-standard sysfs, reimplement the LED controls on TonePort as LED class devices. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6/toneport: Fix wrong argument for toneport_has_led()Takashi Iwai1-3/+1
Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-08 11:36:29 +0300