summaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)AuthorFilesLines
2012-10-09Merge tag 'sound-3.7' of ↵Linus Torvalds142-3023/+6800
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode." Fix up various arm soc header file reorg conflicts. * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits) ALSA: hda - Add new codec ALC283 ALC290 support ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls ALSA: hda - fix indices on boost volume on Conexant ALSA: aloop - add locking to timer access ALSA: hda - Fix hang caused by race during suspend. sound: Remove unnecessary semicolon ALSA: hda/realtek - Fix detection of ALC271X codec ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310 ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event ALSA: hda - make a generic unsol event handler ASoC: codecs: Add DA9055 codec driver ASoC: eukrea-tlv320: Convert it to platform driver ALSA: ASoC: add DT bindings for CS4271 ASoC: wm_hubs: Ensure volume updates are handled during class W startup ASoC: wm5110: Adding missing volume update bits ASoC: wm5110: Add OUT3R support ASoC: wm5110: Add AEC loopback support ASoC: wm5110: Rename EPOUT to HPOUT3 ASoC: arizona: Add more clock rates ASoC: arizona: Add more DSP options for mixer input muxes ...
2012-10-06Merge tag 'asoc-3.7' of ↵Takashi Iwai19-92/+1951
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Additional updates for v3.7 A couple more updates for 3.7, enhancements to the ux500 and wm2000 drivers, a new driver for DA9055 and the support for regulator bypass mode. With the exception of the DA9055 this has all had a chance to soak in -next (the driver was added on Friday so should be in -next today).
2012-10-05sections: fix section conflicts in soundAndi Kleen1-1/+1
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-02Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds3-5/+5
Pull workqueue changes from Tejun Heo: "This is workqueue updates for v3.7-rc1. A lot of activities this round including considerable API and behavior cleanups. * delayed_work combines a timer and a work item. The handling of the timer part has always been a bit clunky leading to confusing cancelation API with weird corner-case behaviors. delayed_work is updated to use new IRQ safe timer and cancelation now works as expected. * Another deficiency of delayed_work was lack of the counterpart of mod_timer() which led to cancel+queue combinations or open-coded timer+work usages. mod_delayed_work[_on]() are added. These two delayed_work changes make delayed_work provide interface and behave like timer which is executed with process context. * A work item could be executed concurrently on multiple CPUs, which is rather unintuitive and made flush_work() behavior confusing and half-broken under certain circumstances. This problem doesn't exist for non-reentrant workqueues. While non-reentrancy check isn't free, the overhead is incurred only when a work item bounces across different CPUs and even in simulated pathological scenario the overhead isn't too high. All workqueues are made non-reentrant. This removes the distinction between flush_[delayed_]work() and flush_[delayed_]_work_sync(). The former is now as strong as the latter and the specified work item is guaranteed to have finished execution of any previous queueing on return. * In addition to the various bug fixes, Lai redid and simplified CPU hotplug handling significantly. * Joonsoo introduced system_highpri_wq and used it during CPU hotplug. There are two merge commits - one to pull in IRQ safe timer from tip/timers/core and the other to pull in CPU hotplug fixes from wq/for-3.6-fixes as Lai's hotplug restructuring depended on them." Fixed a number of trivial conflicts, but the more interesting conflicts were silent ones where the deprecated interfaces had been used by new code in the merge window, and thus didn't cause any real data conflicts. Tejun pointed out a few of them, I fixed a couple more. * 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits) workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending() workqueue: use cwq_set_max_active() helper for workqueue_set_max_active() workqueue: introduce cwq_set_max_active() helper for thaw_workqueues() workqueue: remove @delayed from cwq_dec_nr_in_flight() workqueue: fix possible stall on try_to_grab_pending() of a delayed work item workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback() workqueue: use __cpuinit instead of __devinit for cpu callbacks workqueue: rename manager_mutex to assoc_mutex workqueue: WORKER_REBIND is no longer necessary for idle rebinding workqueue: WORKER_REBIND is no longer necessary for busy rebinding workqueue: reimplement idle worker rebinding workqueue: deprecate __cancel_delayed_work() workqueue: reimplement cancel_delayed_work() using try_to_grab_pending() workqueue: use mod_delayed_work() instead of __cancel + queue workqueue: use irqsafe timer for delayed_work workqueue: clean up delayed_work initializers and add missing one workqueue: make deferrable delayed_work initializer names consistent workqueue: cosmetic whitespace updates for macro definitions workqueue: deprecate system_nrt[_freezable]_wq workqueue: deprecate flush[_delayed]_work_sync() ...
2012-10-02Merge tag 'multiplatform' of ↵Linus Torvalds16-16/+16
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-10-02Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds5-26/+205
Pull ARM soc device tree updates from Olof Johansson: "Device tree conversion and enablement branch. Mostly a bunch of new bindings and setup for various platforms, but the Via/Winchip VT8500 platform is also converted over from being 100% legacy to now use device tree for probing. More of that will come for 3.8." Trivial conflicts due to removal of vt8500 files, and one documentation file that was added with slightly different contents both here and in the USb tree. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (212 commits) arm: vt8500: Fixup for missing gpio.h ARM: LPC32xx: LED fix in PHY3250 DTS file ARM: dt: mmp-dma: add binding file arm: vt8500: Update arch-vt8500 to devicetree support. arm: vt8500: gpio: Devicetree support for arch-vt8500 arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices arm: vt8500: clk: Add Common Clock Framework support video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb serial: vt8500: Add devicetree support for vt8500-serial rtc: vt8500: Add devicetree support for vt8500-rtc arm: vt8500: Add device tree files for VIA/Wondermedia SoC's ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support ARM: tegra: Add Avionic Design Medcom-Wide support ARM: tegra: Add Avionic Design Plutux support ARM: tegra: Add Avionic Design Tamonten support ARM: tegra: dts: Add pwm label ARM: ux500: Fix SSP register address format ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT ARM: ux500: Add all encompassing sound node to the HREF Device Tree ...
2012-10-02Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds20-266/+23
Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...
2012-09-28ASoC: codecs: Add DA9055 codec driverAshish Chavan3-0/+1516
This patch adds support for Dialog semiconductor's DA9055 audio codec. This has been tested on DA9055 EVB with Samsung SMDK6410 board. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <david.chen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-28ASoC: eukrea-tlv320: Convert it to platform driverFabio Estevam1-18/+19
Convert eukrea-tlv320 to platform driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-28ALSA: ASoC: add DT bindings for CS4271Daniel Mack1-3/+21
Apart from pure matching, the bindings also support setting the the reset gpio line. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Alexander Sverdlin <subaparts@yandex.ru> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-28ASoC: wm_hubs: Ensure volume updates are handled during class W startupMark Brown1-0/+5
In some circumstances we may need to flush volume updates to the device after switching to class W mode. Do this unconditionally to ensure that these situations are handled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-09-27ASoC: wm5110: Adding missing volume update bitsCharles Keepax1-0/+4
The volume update bits were being set on all but one input and one output. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-09-26ASoC: wm5110: Add OUT3R supportMark Brown1-0/+4
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm5110: Add AEC loopback supportMark Brown1-0/+24
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm5110: Rename EPOUT to HPOUT3Mark Brown1-15/+30
The third output on WM5110 is a general purpose headphone output which can be used to drive an earpice rather than a dedicated earpiece driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: arizona: Add more clock ratesMark Brown1-0/+6
Some devices support additional clock rates. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: arizona: Add more DSP options for mixer input muxesMark Brown2-1/+37
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm0010: Initialise chip state before we register the interruptMark Brown1-5/+2
The interrupt handler uses the chip state. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm0010: Don't check if reset GPIO is defined when removingMark Brown1-5/+2
We will fail to probe without one. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm0010: Allow slow GPIO for resetMark Brown1-3/+5
We never set the GPIO from atomic context so there's no reason why we can't support a GPIO that needs to sleep when configuring. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm5110: Enable bypass mode for MICVDDMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm5102: Enable bypass mode for MICVDDMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: dapm: Allow regulators to bypass as well as disable when idleMark Brown1-2/+21
Allow regulators managed via DAPM to make use of the bypass support that has recently been added to the regulator API by setting a flag SND_SOC_DAPM_REGULATOR_BYPASS. When this flag is set the regulator will be put into bypass mode before being disabled, allowing the regulator to fall into bypass mode if it can't be disabled due to other users. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm2000: Correct register sizeMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-09-25ASoC: cs4270: Remove mono supportFabio Estevam1-2/+2
According to cs4270 datasheet, there is no reference to mono mode. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-24dmaengine: Add flags parameter to dmaengine_prep_dma_cyclic()Peter Ujfalusi1-1/+5
With this parameter added to dmaengine_prep_dma_cyclic() the API will be in sync with other dmaengine_prep_*() functions. The dmaengine_prep_dma_cyclic() function primarily used by audio for cyclic transfer required by ALSA, we use the from audio to ask dma drivers to suppress interrupts (if DMA_PREP_INTERRUPT is cleared) when it is supported on the platform. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-23Merge branch 'for-arm-soc-next' of ↵Olof Johansson15-66/+226
git://git.linaro.org/people/ljones/linux-3.0-ux500 into next/dt * 'for-arm-soc-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500: ARM: ux500: Fix SSP register address format ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT ARM: ux500: Add all encompassing sound node to the HREF Device Tree ARM: ux500: Add nodes for the MSP into the HREF Device Tree ARM: ux500: Add all known I2C sub-device nodes to the HREF DT ARM: ux500: Stop registering I2C sub-devices for HREF when DT is enabled ARM: ux500: Stop registering Audio devices for HREF when DT is enabled ARM: ux500: Add all encompassing sound node to the Snowball Device Tree ARM: ux500: Add nodes for the MSP into Device Tree ARM: ux500: Rename MSP board file to something more meaningful ARM: ux500: Remove platform registration of MSP devices ARM: ux500: Stop registering the MOP500 Audio driver from platform code ARM: ux500: Pass MSP DMA platform data though AUXDATA ARM: ux500: Fork MSP platform registration for step-by-step DT enablement ARM: ux500: Add AB8500 CODEC node to DB8500 Device Tree ARM: ux500: Clean-up MSP platform code ARM: ux500: Pass SDI DMA information though AUX_DATA to MMCI ARM: ux500: Add UART support to the HREF Device Tree ARM: ux500: Add skeleton Device Tree for the HREF reference board ... + sync to v3.6-rc6
2012-09-23Merge remote-tracking branch 'asoc/topic/ux500' into for-3.7Mark Brown5-26/+205
2012-09-23ASoC: wm2000: Add regulator supportMark Brown1-6/+47
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-23ASoC: wm2000: Convert to devm_regmap_init_i2c()Mark Brown1-9/+4
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22Merge tag 'v3.6-rc6' into for-3.7Mark Brown10-39/+20
Linux 3.6-rc6 has all our bug fixes. Conflicts (trivial overlap): sound/soc/omap/am3517evm.c
2012-09-22ASoC: twl4030: Support for DT booted kernelPeter Ujfalusi1-8/+47
When the kernel has been booted with DT blob the platform data is NULL for the driver. We need to construct the pdata based on the DT information for runtime use. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: twl4030: Add pointer to pdata within the private dataPeter Ujfalusi1-7/+7
Access the pdata via a pointer within the twl4030_priv structure. In preparation for DeviceTree support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: twl4030: Convert to use devm_kzallocPeter Ujfalusi1-2/+2
Allocate the private data with devm_kzalloc. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC/mfd: twl4030: Remove set_hs_extmute callback from platform dataPeter Ujfalusi1-6/+0
We no longer have users for the set_hs_extmute callback which has been replaced by hs_extmute_gpio so the codec driver can handle the external mute if it is needed by the board. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIOPeter Ujfalusi1-4/+0
Remove the use of set_hs_extmute callback and let the codec driver to handle the extmute GPIO. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: twl4030: Move hs_extmute GPIO handling to driverPeter Ujfalusi1-2/+30
The external mute (if it is in use) is handled by a GPIO line. Prepare to remove the set_hs_extmute callback and replace it with: hs_extmute_gpio: the GPIO number to use for external mute When the users of set_hs_extmute has been converted the callback can be removed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-pcm: Convert to use dmaenginePeter Ujfalusi2-211/+61
Original author: Russell King <rmk+kernel@arm.linux.org.uk> Switch the omap-pcm to use dmaengine. Certain features are not supported by after dmaengine conversion: 1. No period wakeup mode DMA engine has no way to communicate this information through standard channels. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: OMAP: mcbsp, mcpdm, dmic, hdmi: Set dma_data at startup timePeter Ujfalusi4-15/+21
Set the dma_data for the stream (snd_soc_dai_set_dma_data) at dai_startup time so omap-pcm will have access to the needed information regarding to the DMA channel earlier. This is needed for the clean dmaengine support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-pcm, omap-dmic: Change the use of omap_pcm_dma_data->data_typePeter Ujfalusi3-4/+5
Instead of the OMAP DMA data type definition the data_type will be used to specify the number of bits the DMA word should be configured or 0 in case when based on the stream's format the omap-pcm can decide the needed DMA word size. This feature is needed for the omap-hdmi where the sDMA need to be configured for 32bit word type regardless of the audio format used. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: OMAP: mcbsp, mcpdm, dmic: Let omap-pcm to pick the dma_typePeter Ujfalusi3-8/+0
omap-pcm can figure out the correct dma_type based on the stream's format. In this way we can get rid of the plat/dma.h include from these drivers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-mcpdm: Use platform_get_resource_* to get resourcesPeter Ujfalusi1-4/+23
Get the needed resources in a correct way and avoid using defines for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-pcm: Prepare to configure the DMA data_type based on stream ↵Peter Ujfalusi1-2/+29
properties Based on the format of the stream the omap-pcm can decide alone what data type should be used with by the sDMA. Keep the possibility for OMAP dai drivers to tell omap-pcm if they want to use different data type. This is needed for the omap-hdmi for example which needs 32bit data type even if the stream format is S16_LE. The check if (dma_data->data_type) is safe at the moment since omap-pcm does not support 8bit samples (OMAP_DMA_DATA_TYPE_S8 == 0x00). The next step is to redefine the meaning of dma_data->data_type to unblock this limitation. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: OMAP: Remove sync_mode from omap_pcm_dma_data structPeter Ujfalusi5-9/+1
The omap-pcm platform driver no longer needs this parameter to select between ELEMENT and PACKET mode. The selection is based on the configured packet_size. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-pcm: Select sDMA synchronization based on packet_sizePeter Ujfalusi1-1/+6
Since we only have element or packet synchronization we can use the dma_data->packet_size to select the desired mode: if packet_size is 0 we use ELEMENT mode if packet_size is not 0 we use PACKET mode for sDMA synchronization. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-mcbsp: Use sDMA packet mode instead of frame modePeter Ujfalusi1-30/+17
When McBSP is configured in threshold mode we can use sDMA packet mode in all cases. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: fsl: register the wm9712-codecEric Millbrandt1-3/+29
The mpc5200-psc-ac97 driver does not enumerate attached ac97 devices, so register the device here. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: fsl: pcm030-audio-fabric use snd_soc_register_cardEric Millbrandt1-18/+47
Convert pcm030-audio-fabric to use the new snd_soc_register_card api instead of the older method of registering a separate platform device. Create the dai_link to the mpc5200_psc_ac97 platform using the device tree. Convert the pcm030-audio-fabric driver to a platform-driver and add a remove function. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: fsl: add PPC_MPC52xx dependency to SND_POWERPC_SOCEric Millbrandt1-1/+1
mpc52xx socs do not define FSL_SOC but need SND_POWERPC_SOC defined to build ASoC drivers. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: twl6040: Convert to use DAI DAPM widgetsPeter Ujfalusi1-14/+29
Use DAPM mapping for stream events and give unique names for the streams. This change also fixes the following warning: twl6040-codec twl6040-codec: Failed to create Capture debugfs file Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-17 06:02:27 +0300