summaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)AuthorFilesLines
2013-12-19Merge remote-tracking branches 'asoc/fix/adsp', 'asoc/fix/arizona', ↵Mark Brown11-32/+75
'asoc/fix/atmel', 'asoc/fix/fsl', 'asoc/fix/kirkwood', 'asoc/fix/tegra', 'asoc/fix/wm8904' and 'asoc/fix/wm8962' into asoc-linus
2013-12-19Merge remote-tracking branch 'asoc/fix/dma' into asoc-linusMark Brown1-11/+27
2013-12-19Merge remote-tracking branch 'asoc/fix/core' into asoc-linusMark Brown1-2/+3
2013-12-18ASoC: wm8904: fix DSP mode B configurationBo Shen1-1/+1
When wm8904 work in DSP mode B, we still need to configure it to work in DSP mode. Or else, it will work in Right Justified mode. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-12-18ASoC: wm_adsp: Add small delay while polling DSP RAM startCharles Keepax1-3/+7
Some devices are getting very close to the limit whilst polling the RAM start, this patch adds a small delay to this loop to give a longer startup timeout. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-12-17ASoC: kirkwood: Fix the CPU DAI ratesJean-Francois Moine1-12/+12
This patch fixes the rates declared in the CPU DAI parameters: - SNDRV_PCM_RATE_KNOT and the discrete rates SNDRV_PCM_RATE_xxx should not be used with SNDRV_PCM_RATE_CONTINUOUS, - SNDRV_PCM_RATE_CONTINUOUS asks for rate_min and rate_max, - the device may do streaming down to 5512Hz. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17ASoC: wm5110: Correct HPOUT3 DAPM route typoCharles Keepax1-1/+1
Reported-by: Kyung-Kwee Ryu <kyung-kwee.ryu@wolfsonmicro.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-12-09ASoC: don't leak on error in snd_dmaengine_pcm_registerStephen Warren1-11/+27
If snd_dmaengine_pcm_register()'s call to snd_soc_add_platform() fails, all objects allocated during registration are leaked. Fix this by adding error-handling code. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-09ASoC: fsl: imx-wm8962: Don't update bias_level in machine driverNicolin Chen1-2/+0
If we update it here, the set_bias_level() of Codec driver won't be normally called and we will then miss some essential procedures in set_bias_level() of the Codec driver. Thus drop it. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-09ASoC: tegra: fix uninitialized variables in set_fmtStephen Warren3-11/+11
In tegra*_i2s_set_fmt(), in the (fmt == SND_SOC_DAIFMT_CBM_CFM) case, "val" is never assigned to, but left uninitialized. The other case does initialized it. Fix this by initializing val at the start of the function, and only ever ORing into it. Update the handling of "mask" so it works the same way for consistency. Update tegra20_spdif.c to use the same code-style for consistency, even though it doesn't happen to suffer from the same problem at present. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org> Fixes: 0f163546a772 ("ASoC: tegra: use regmap more directly") Cc: <stable@vger.kernel.org>
2013-12-05ASoC: wm8962: Enable SYSCLK provisonally before fetching generated DSPCLK_DIVNicolin Chen1-0/+13
DSPCLK_DIV can be only generated correctly after enabling SYSCLK. But if the current bias_level hasn't reached SND_SOC_BIAS_ON, DAPM won't enable SYSCLK, which would cause the calculation result from DSPCLK_DIV invalid since bit DSPCLK_DIV will be finally turned to its true value after DAPM enables SYSCLK while the driver won't calculate it again for the current instance. In this circumstance, a playback which needs non-zero DSPCLK_DIV would be distorted due to unexpected clock frequency resulted from an invalid DSPCLK_DIV value. So this patch provisionally enables the SYSCLK to get a valid DSPCLK_DIV for calculation and then disables it afterward. Signed-off-by: Nicolin Chen <b42378@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-04ASoC: sam9x5_wm8731: change to work in DSP A modeBo Shen1-1/+1
Change sam9x5 with wm8731 work in DSP A mode, this will fix the left/right channel swap issue. Signed-off-by: Bo Shen <voice.shen@atmel.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-04ASoC: atmel_ssc_dai: add dai trigger opsBo Shen1-1/+29
According to the SSC specifiation, it should be enabled after DMA is enabled. So, add trigger operation to make sure the right sequence. Signed-off-by: Bo Shen <voice.shen@atmel.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-04ASoC: soc-pcm: Use valid condition for snd_soc_dai_digital_mute() in hw_free()Nicolin Chen1-2/+3
The snd_soc_dai_digital_mute() here will be never executed because we only decrease codec->active in snd_soc_close(). Thus correct it. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-03Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/atmel', ↵Mark Brown8-39/+24
'asoc/fix/fsl', 'asoc/fix/kirkwood', 'asoc/fix/omap', 'asoc/fix/rcar', 'asoc/fix/wm8731' and 'asoc/fix/wm8990' into asoc-linus
2013-12-03ASoC: wm8731: fix dsp mode configurationBo Shen1-2/+2
According to WM8731 "PD, Rev 4.9 October 2012" datasheet, when it works in DSP mode A, LRP = 1, while works in DSP mode B, LRP = 0. So, fix LRP for DSP mode as the datesheet specification. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-12-02ASoC: core: fix devres parameter in devm_snd_soc_register_card()Shawn Guo1-2/+2
Since devm_card_release() expects parameter 'res' to be a pointer to struct snd_soc_card, devm_snd_soc_register_card() should really pass such a pointer rather than the one to struct device. This bug causes the kernel Oops below with imx-sgtl500 driver when we remove the module. It happens because with 'card' pointing to the wrong structure, card->num_rtd becomes 0 in function soc_remove_dai_links(). Consequently, soc_remove_link_components() and in turn soc_cleanup_codec[platform]_debugfs() will not be called on card removal. It results in that debugfs_card_root is being removed while its child entries debugfs_codec_root and debugfs_platform_root are still there, and thus the kernel Oops. Fix the bug by correcting the parameter 'res' to be the pointer to struct snd_soc_card. $ lsmod Module Size Used by snd_soc_imx_sgtl5000 3506 0 snd_soc_sgtl5000 13677 2 snd_soc_imx_audmux 5324 1 snd_soc_imx_sgtl5000 snd_soc_fsl_ssi 8139 2 imx_pcm_dma 1380 1 snd_soc_fsl_ssi $ rmmod snd_soc_imx_sgtl5000 Unable to handle kernel paging request at virtual address e594025c pgd = be134000 [e594025c] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: snd_soc_imx_sgtl5000(-) snd_soc_sgtl5000 snd_soc_imx_audmux snd_soc_fsl_ssi imx_pcm_dma CPU: 0 PID: 1793 Comm: rmmod Not tainted 3.13.0-rc1 #1570 task: bee28900 ti: bfbec000 task.ti: bfbec000 PC is at debugfs_remove_recursive+0x28/0x154 LR is at snd_soc_unregister_card+0xa0/0xcc pc : [<80252b38>] lr : [<80496ac4>] psr: a0000013 sp : bfbede00 ip : bfbede28 fp : bfbede24 r10: 803281d4 r9 : bfbec000 r8 : 803271ac r7 : bef54440 r6 : 00000004 r5 : bf9a4010 r4 : bf9a4010 r3 : e5940224 r2 : 00000000 r1 : bef54450 r0 : 803271ac Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c53c7d Table: 4e13404a DAC: 00000015 Process rmmod (pid: 1793, stack limit = 0xbfbec240) Stack: (0xbfbede00 to 0xbfbee000) de00: 00000000 bf9a4010 bf9a4010 00000004 bef54440 bec89000 bfbede44 bfbede28 de20: 80496ac4 80252b1c 804a4b60 bfbede60 bf9a4010 00000004 bfbede54 bfbede48 de40: 804a4b74 80496a30 bfbede94 bfbede58 80328728 804a4b6c bfbede94 a0000013 de60: bf1b5800 bef54440 00000002 bf9a4010 7f0169f8 bf9a4044 00000081 8000e9c4 de80: bfbec000 00000000 bfbedeac bfbede98 80328cb0 80328618 7f016000 bf9a4010 dea0: bfbedec4 bfbedeb0 8032561c 80328c84 bf9a4010 7f0169f8 bfbedee4 bfbedec8 dec0: 80325e84 803255a8 bee28900 7f0169f8 00000000 78208d30 bfbedefc bfbedee8 dee0: 80325410 80325dd4 beca8100 7f0169f8 bfbedf14 bfbedf00 803264f8 803253c8 df00: 7f01635c 7f016a3c bfbedf24 bfbedf18 80327098 803264d4 bfbedf34 bfbedf28 df20: 7f016370 80327090 bfbedfa4 bfbedf38 80085ef0 7f016368 bfbedf54 5f646e73 df40: 5f636f73 5f786d69 6c746773 30303035 00000000 78208008 bfbedf84 bfbedf68 df60: 800613b0 80061194 fffffffe 78208d00 7efc2f07 00000081 7f016a3c 00000800 df80: bfbedf84 00000000 00000000 fffffffe 78208d00 7efc2f07 00000000 bfbedfa8 dfa0: 8000e800 80085dcc fffffffe 78208d00 78208d30 00000800 a8c82400 a8c82400 dfc0: fffffffe 78208d00 7efc2f07 00000081 00000002 00000000 78208008 00000800 dfe0: 7efc2e1c 7efc2ba8 76f5ca47 76edec7c 80000010 78208d30 00000000 00000000 Backtrace: [<80252b10>] (debugfs_remove_recursive+0x0/0x154) from [<80496ac4>] (snd_soc_unregister_card+0xa0/0xcc) r8:bec89000 r7:bef54440 r6:00000004 r5:bf9a4010 r4:bf9a4010 r3:00000000 [<80496a24>] (snd_soc_unregister_card+0x0/0xcc) from [<804a4b74>] (devm_card_release+0x14/0x18) r6:00000004 r5:bf9a4010 r4:bfbede60 r3:804a4b60 [<804a4b60>] (devm_card_release+0x0/0x18) from [<80328728>] (release_nodes+0x11c/0x1dc) [<8032860c>] (release_nodes+0x0/0x1dc) from [<80328cb0>] (devres_release_all+0x38/0x54) [<80328c78>] (devres_release_all+0x0/0x54) from [<8032561c>] (__device_release_driver+0x80/0xd4) r4:bf9a4010 r3:7f016000 [<8032559c>] (__device_release_driver+0x0/0xd4) from [<80325e84>] (driver_detach+0xbc/0xc0) r5:7f0169f8 r4:bf9a4010 [<80325dc8>] (driver_detach+0x0/0xc0) from [<80325410>] (bus_remove_driver+0x54/0x98) r6:78208d30 r5:00000000 r4:7f0169f8 r3:bee28900 [<803253bc>] (bus_remove_driver+0x0/0x98) from [<803264f8>] (driver_unregister+0x30/0x50) r4:7f0169f8 r3:beca8100 [<803264c8>] (driver_unregister+0x0/0x50) from [<80327098>] (platform_driver_unregister+0x14/0x18) r4:7f016a3c r3:7f01635c [<80327084>] (platform_driver_unregister+0x0/0x18) from [<7f016370>] (imx_sgtl5000_driver_exit+0x14/0x1c [snd_soc_imx_sgtl5000]) [<7f01635c>] (imx_sgtl5000_driver_exit+0x0/0x1c [snd_soc_imx_sgtl5000]) from [<80085ef0>] (SyS_delete_module+0x130/0x18c) [<80085dc0>] (SyS_delete_module+0x0/0x18c) from [<8000e800>] (ret_fast_syscall+0x0/0x48) r6:7efc2f07 r5:78208d00 r4:fffffffe Code: 889da9f8 e5983020 e3530000 089da9f8 (e5933038) ---[ end trace 825e7e125251a225 ]--- Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-02ASoC: omap: n810: Convert to clk_prepare_enable/clk_disable_unprepareJarkko Nikula1-2/+2
N810 audio driver has stopped working at some point. Probably when OMAP2 was converted to common clock framework since now call to clk_enable dumps the stack trace in drivers/clk/clk.c: __clk_enable() due clk->prepare_count is zero. Fix this by converting clk_enable/_disable calls to those that take care of clock prepare/unprepare. I'm not queueing this to linux-stable since OMAP2 common clock framework conversion in commit ed1ebc4948fd ("ARM: OMAP2: clock: Convert to common clk") happened before N810 was really usable in mainline and user base for N810 is anyway small. Potential linux-stable candidates are only those after commit 3d3a6d18abc6 ("watchdog: introduce retu_wdt driver"). Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-02ASoC: fsl: set correct platform drvdata in pcm030_fabric_probe()Wei Yongjun1-1/+2
platform_set_drvdata(op, pdata) in pcm030_fabric_probe() will be overwrited when calling snd_soc_register_card(card), but cm030_fabric_remove() use drvdata as a type of struct pcm030_audio_data, so we should move platform_set_drvdata() below snd_soc_register_card() call. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-02ASoC: fsl: imx-pcm-fiq: Remove unused 'runtime' variableFabio Estevam1-1/+0
Commit 68f9672b (ASoC: fsl: imx-pcm-fiq: remove bogus period delta calculation) introduced the following build warning: sound/soc/fsl/imx-pcm-fiq.c:53:26: warning: unused variable 'runtime' [-Wunused-variable] Remove the unused 'runtime' variable. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Oskar Schirmer <oskar@scara.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-02ASoC: fsl: imx-pcm-fiq: remove bogus period delta calculationOskar Schirmer1-19/+2
Originally snd_hrtimer_callback() used iprtd->period_time for some jiffies based estimation to determine the right moment to call snd_pcm_period_elapsed(). As timer drifts may well be a problem, this was changed in commit b4e82b5b785670b6 to be based on buffer transmission progress, using iprtd->offset and runtime->buffer_size to calculate the amount of data since last period had elapsed. Unfortunately, iprtd->offset counts in bytes, while runtime->buffer_size counts frames, so adding these to find some delta is like comparing apples and oranges, and eventually results in negative delta values every now and then. This is no big harm, because it simply causes snd_pcm_period_elapsed() being called more often than necessary, as negative delta is taken for a large unsigned value by implicit conversion rule. Nonetheless, the calculation is broken, so one would replace the runtime->buffer_size by its equivalent in bytes. But then, there are chances snd_pcm_period_elapsed() is called late, because calculating the moment for the elapsed period into delta is based against the iprtd->last_offset, which is not necessarily the first byte of the period in question, but some random byte which the FIQ handler left us with in r8/r9 by accident. Again, negative impact is low, as there are plenty of periods already prefilled with data, and snd_pcm_period_elapsed() will probably be called latest when the following period is reached. However, the calculation is conceptually broken, and we are best off removing the clever stuff altogether. snd_pcm_period_elapsed() is now simply called once everytime snd_hrtimer_callback() is run, which may not be most accurate, but at least this way we are quite sure we dont miss an end of period. There is not much extra effort wasted by superfluous calls to snd_pcm_period_elapsed(), as the timer frequency closely matches the period size anyway. Signed-off-by: Oskar Schirmer <oskar@scara.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-29ASoC: core: Use consistent byte ordering in snd_soc_bytes_getCharles Keepax1-2/+2
snd_soc_bytes_put treats the data in the binary control as big endian words, however snd_soc_bytes_get uses the endian of the host machine. This causes the two functions to be inconsistant with how the mask is applied on little endian machines. This patch applies the big_endian format used in snd_soc_bytes_put to snd_soc_bytes_get. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-27ASoC: kirkwood: Fix erroneous double output while playingJean-Francois Moine1-5/+5
This patch fixes the setting of the register KIRKWOOD_PLAYCTL which did always streaming on both I2S and SPDIF, ignoring the DAI ID. The bug was introduced by the commit 75b9b65ee5a "ASoC: kirkwood: add S/PDIF support" Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-27ASoC: kirkwood: Fix invalid S/PDIF formatJean-Francois Moine1-4/+8
This patch removes the 32 bits format which is not supported by S/PDIF output. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-27ASoC: pcm: Always honor DAI min and max sample rate constraintsLars-Peter Clausen1-6/+12
snd_pcm_limit_hw_rates() will initialize the minimum and maximum sample rate for the PCM stream based on the rates specified in the rates field. Since we call snd_pcm_limit_hw_rates() after soc_pcm_init_runtime_hw() it will essentially overwrite the min and max rate set in soc_pcm_init_runtime_hw(). This may cause the minimum or maximum rate to be set to a value outside the range of one of the components if one of the components sets either SNDRV_PCM_RATE_CONTINUOUS or SNDRV_PCM_RATE_KNOT and the other component specified a discrete rate via SNDRV_PCM_RATE_[0-9]* that is outside of the first component's rate range. To fix this first calculate the minimum and maximum rates using snd_pcm_limit_hw_rates() and then on top of that apply the contraints specified in the snd_soc_pcm_stream structs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Takashi iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-27ASoC: pcm: Fix rate_max calculationLars-Peter Clausen1-1/+1
In order to make sure that the sample rate is in the supported range of both components the maximum rate of the card should be the minimum of the maximum rate of each components. There is one special case to consider though, if max_rate is set to 0 this means there is no maximum specified, so use min_not_zero() macro which will give use the desired result. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Takashi iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-27ASoC: wm5110: Remove output OSR and PGA volume controlsCharles Keepax1-25/+0
These are managed automatically in current revisions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-27ASoC: atmel: sam9x5_wm8731: fix oops when unload moduleBo Shen1-0/+2
As the priv is not assigned to card->drvdata, it is NULL, so when unload module, it will cause NULL pointer oops. Assign priv to card->drvdata to fix this issue. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-25ASoC: wm8990: Mark the register map as dirty when powering downMark Brown1-0/+2
Otherwise we'll skip sync on resume. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2013-11-24ASoC: rcar: select REGMAPKuninori Morimoto1-0/+1
55e5b6fd5af04b6d8b0ac6635edf49476ff298ba (ASoC: rsnd: use regmap instead of original register mapping method) support regmap/regmap_field on Renesas sound driver. It needs CONFIG_REGMAP now. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-22Merge tag 'sound-fix2-3.13-rc1' of ↵Linus Torvalds5-42/+86
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull second set of sound fixes from Takashi Iwai: "A collection of small fixes in HD-audio quirks and runtime PM, ASoC rcar, abs8500 and other codecs. Most of commits are for stable kernels, too" * tag 'sound-fix2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Set current_headset_type to ALC_HEADSET_TYPE_ENUM (janitorial) ALSA: hda - Provide missing pin configs for VAIO with ALC260 ALSA: hda - Add headset quirk for Dell Inspiron 3135 ALSA: hda - Fix the headphone jack detection on Sony VAIO TX ALSA: hda - Fix missing bass speaker on ASUS N550 ALSA: hda - Fix unbalanced runtime PM notification at resume ASoC: arizona: Set FLL to free-run before disabling ALSA: hda - A casual Dell Headset quirk ASoC: rcar: fixup dma_async_issue_pending() timing ASoC: rcar: off by one in rsnd_scu_set_route() ASoC: wm5110: Add post SYSCLK register patch for rev D chip ASoC: ab8500: Revert to using custom I/O functions ALSA: hda - Also enable mute/micmute LED control for "Lenovo dock" fixup ALSA: firewire-lib: include sound/asound.h to refer to snd_pcm_format_t ALSA: hda - Select FW_LOADER from CONFIG_SND_HDA_CODEC_CA0132_DSP ALSA: hda - Enable mute/mic-mute LEDs for more Thinkpads with Realtek codec ASoC: rcar: fixup mod access before checking
2013-11-21Merge tag 'asoc-v3.13-5' of ↵Takashi Iwai5-42/+86
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.13 A bunch of device specific fixes, nothing with a general impact here.
2013-11-21Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-1/+1
Pull slave-dmaengine changes from Vinod Koul: "This brings for slave dmaengine: - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as dmaengine can only transfer and not verify validaty of dma transfers - Bunch of fixes across drivers: - cppi41 driver fixes from Daniel - 8 channel freescale dma engine support and updated bindings from Hongbo - msx-dma fixes and cleanup by Markus - DMAengine updates from Dan: - Bartlomiej and Dan finalized a rework of the dma address unmap implementation. - In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus [Walleij] for their review. - Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. - Some minor fixes / cleanups to mv_xor and ioatdma" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits) dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers dma: mv_xor: Remove unneeded NULL address check ioat: fix ioat3_irq_reinit ioat: kill msix_single_vector support raid6test: add new corner case for ioatdma driver ioatdma: clean up sed pool kmem_cache ioatdma: fix selection of 16 vs 8 source path ioatdma: fix sed pool selection ioatdma: Fix bug in selftest after removal of DMA_MEMSET. dmatest: verbose mode dmatest: convert to dmaengine_unmap_data dmatest: add a 'wait' parameter dmatest: add basic performance metrics dmatest: add support for skipping verification and random data setup dmatest: use pseudo random numbers dmatest: support xor-only, or pq-only channels in tests dmatest: restore ability to start test at module load and init dmatest: cleanup redundant "dmatest: " prefixes dmatest: replace stored results mechanism, with uniform messages Revert "dmatest: append verify result to results" ...
2013-11-20Merge remote-tracking branch 'asoc/fix/wm8962' into asoc-linusMark Brown1-0/+2
2013-11-20Merge remote-tracking branch 'asoc/fix/rcar' into asoc-linusMark Brown2-9/+6
2013-11-20Merge remote-tracking branch 'asoc/fix/fsl' into asoc-linusMark Brown19-124/+207
2013-11-20Merge remote-tracking branch 'asoc/fix/dma' into asoc-linusMark Brown1-1/+3
2013-11-20Merge remote-tracking branch 'asoc/fix/cs42l52' into asoc-linusMark Brown1-1/+1
2013-11-20Merge remote-tracking branch 'asoc/fix/blackfin' into asoc-linusMark Brown1-0/+1
2013-11-20Merge remote-tracking branch 'asoc/fix/arizona' into asoc-linusMark Brown2-1/+46
2013-11-20Merge remote-tracking branch 'asoc/fix/ab8500' into asoc-linusMark Brown104-2781/+3145
2013-11-20ASoC: arizona: Set FLL to free-run before disablingRichard Fitzgerald1-0/+4
The FLL must be placed into free-run mode before disabling to allow it to entirely shut down. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-11-19ASoC: rcar: fixup dma_async_issue_pending() timingKuninori Morimoto1-2/+1
DMAEngine will stall without this patch Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-19ASoC: rcar: off by one in rsnd_scu_set_route()Dan Carpenter1-1/+1
If "id == ARRAY_SIZE(routes)" then we read one space beyond the end of the routes[] array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-19ASoC: wm5110: Add post SYSCLK register patch for rev D chipCharles Keepax1-1/+42
Certain registers require patching after the SYSCLK has been brought up add support for this into the CODEC driver. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-11-19ASoC: ab8500: Revert to using custom I/O functionsLee Jones1-32/+34
It's been reported that these break audio on Snowball so revert them until a Snowball user has time to investigate. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-19Merge branch 'i2c/for-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c changes from Wolfram Sang: - new drivers for exynos5, bcm kona, and st micro - bigger overhauls for drivers mxs and rcar - typical driver bugfixes, cleanups, improvements - got rid of the superfluous 'driver' member in i2c_client struct This touches a few drivers in other subsystems. All acked. * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) i2c: bcm-kona: fix error return code in bcm_kona_i2c_probe() i2c: i2c-eg20t: do not print error message in syslog if no ACK received i2c: bcm-kona: Introduce Broadcom I2C Driver i2c: cbus-gpio: Fix device tree binding i2c: wmt: add missing clk_disable_unprepare() on error i2c: designware: add new ACPI IDs i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH i2c: exynos5: Remove incorrect clk_disable_unprepare i2c: i2c-st: Add ST I2C controller i2c: exynos5: add High Speed I2C controller driver i2c: rcar: fixup rcar type naming i2c: scmi: remove some bogus NULL checks i2c: sh_mobile & rcar: Enable the driver on all ARM platforms i2c: sh_mobile: Convert to clk_prepare/unprepare i2c: mux: gpio: use reg value for i2c_add_mux_adapter i2c: mux: gpio: use gpio_set_value_cansleep() i2c: Include linux/of.h header i2c: mxs: Fix PIO mode on i.MX23 i2c: mxs: Rework the PIO mode operation i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller ...
2013-11-18ASoC: rcar: fixup mod access before checkingKuninori Morimoto1-6/+4
rsnd_dai_connect() is using mod before NULL checking. This patch fixes it up Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-17Merge tag 'sound-fix-3.13-rc1' of ↵Linus Torvalds7-26/+34
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Two peaks in diffstat are for the audio EQ init of IDT codecs and the EMU2004 usb mixer addition, both of which are pretty device-specific, so safe to apply. The rest are a bunch of small fixes, most of them are regression fixes" * tag 'sound-fix-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits) ALSA: hda - load EQ params into IDT codec on HP bNB13 systems ASoC: cs42l52: Correct MIC CTL mask ASoC: wm8962: Turn on regcache_cache_only before disabling regulator ALSA: jack: Unregister input device at disconnection ALSA: pcsp: Fix the order of input device unregistration ASoC: fsl: imx-pcm-fiq: omit fiq counter to avoid harm in unbalanced situations ASoC: blackfin: Fix missing break ALSA: usb-audio: add front jack channel selector for EMU0204 ALSA: hda - Don't clear the power state at snd_hda_codec_reset() ASoC: arizona: Fix typo in name of EQ coefficient controls ALSA: hda - Control EAPD for Master volume on Lenovo N100 ALSA: hda - Don't turn off EAPD for headphone on Lenovo N100 ALSA: isa: not allocating enough space ALSA: snd-aoa: two copy and paste bugs ASoC: wm8997: Correct typo in ISRC mux routes ALSA: hda - Check keep_eapd_on before inv_eapd ALSA: hda - Fix Line Out automute on Realtek multifunction jacks ALSA: msnd: Avoid duplicated driver name ALSA: compress_core: don't return -EBADFD from poll if paused ALSA: hda - hdmi: Fix wrong baseline length in ATI/AMD generated ELD ...
2013-11-16Merge tag 'asoc-v3.13-4' of ↵Takashi Iwai7-26/+34
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.13 A few fixes in drivers, the i.MX and wm8962 fixes are for a pretty nasty issues for users of those drivers if they run into them.
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-22 11:49:55 +0300