summaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)AuthorFilesLines
2024-01-12Merge tag 'sound-6.8-rc1' of ↵Linus Torvalds201-2812/+5349
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "It was a calm development cycle. There were an ALSA core extension for subformat PCM bits and a few ASoC core changes to support N:M mappings, while the most of remaining changes are driver-specific. Core: - API extensions for properly limiting PCM format bits via subformat - Enhanced support for N:M CPU:CODEC mappings in the core and in audio-graph-card2 ASoC: - Lots of SOF updates: fallback support to older IPC versions, notification on control changes with IPC4. Also supports for ACPI parse for the ES83xx driver that reduces quirks. - Device tree support for describing parts of the card which can be active over suspend (for very low power playback or wake word use cases) - Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm SM8250, SM8550, SM8650 and X1E80100 - Drop of Freescale MPC8610 code that is no longer supported HD-audio: - More CS35L41 codec extensions for Dell, HP and Lenovo models - TAS2781 codec extensions for Lenovo and co - New PCM subformat supports Others: - More enhancement for Scarlett2 USB mixer support - Various kselftest fixes" * tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits) kselftest/alsa - conf: Stringify the printed errno in sysfs_get() kselftest/alsa - mixer-test: Fix the print format specifier warning kselftest/alsa - mixer-test: Fix the print format specifier warning kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg() ALSA: hda/tas2781: annotate calibration data endianness ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140 ALSA: ac97: fix build regression ALSA: hda: cs35l41: Support more HP models without _DSD ALSA: hda/tas2781: add fixup for Lenovo 14ARB7 ALSA: hda/tas2781: add TAS2563 support for 14ARB7 ALSA: hda/tas2781: add configurable global i2c address ALSA: hda/tas2781: add ptrs to calibration functions ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie ALSA: hda/tas2781: configure the amp after firmware load ALSA: mark all struct bus_type as const ASoC: pxa: sspa: Don't select SND_ARM ASoC: rt5663: cancel the work when system suspends ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4 ...
2024-01-12Merge tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2-0/+2
Pull drm updates from Dave Airlie: "This contains two major new drivers: - imagination is a first driver for Imagination Technologies devices, it only covers very specific devices, but there is hope to grow it - xe is a reboot of the i915 GPU (shares display) side using a more upstream focused development model, and trying to maximise code sharing. It's not enabled for any hw by default, and will hopefully get switched on for Intel's Lunarlake. This also drops a bunch of the old UMS ioctls. It's been dead long enough. amdgpu has a bunch of new color management code that is being used in the Steam Deck. amdgpu also has a new ACPI WBRF interaction to help avoid radio interference. Otherwise it's the usual lots of changes in lots of places. Detailed summary: new drivers: - imagination - new driver for Imagination Technologies GPU - xe - new driver for Intel GPUs using core drm concepts core: - add CLOSE_FB ioctl - remove old UMS ioctls - increase max objects to accomodate AMD color mgmt encoder: - create per-encoder debugfs directory edid: - split out drm_eld - SAD helpers - drop edid_firmware module parameter format-helper: - cache format conversion buffers sched: - move from kthread to workqueue - rename some internals - implement dynamic job-flow control gpuvm: - provide more features to handle GEM objects client: - don't acquire module reference displayport: - add mst path property documentation fdinfo: - alignment fix dma-buf: - add fence timestamp helper - add fence deadline support bridge: - transparent aux-bridge for DP/USB-C - lt8912b: add suspend/resume support and power regulator support panel: - edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49 - chromebook panel support - elida-kd35t133: rework pm - powkiddy RK2023 panel - himax-hx8394: drop prepare/unprepare and shutdown logic - BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G - Evervision VGG644804, SDC ATNA45AF01 - nv3052c: register docs, init sequence fixes, fascontek FS035VG158 - st7701: Anbernic RG-ARC support - r63353 panel controller - Ilitek ILI9805 panel controller - AUO G156HAN04.0 simplefb: - support memory regions - support power domains amdgpu: - add new 64-bit sequence number infrastructure - add AMD specific color management - ACPI WBRF support for RF interference handling - GPUVM updates - RAS updates - DCN 3.5 updates - Rework PCIe link speed handling - Document GPU reset types - DMUB fixes - eDP fixes - NBIO 7.9/7.11 updates - SubVP updates - XGMI PCIe state dumping for aqua vanjaram - GFX11 golden register updates - enable tunnelling on high pri compute amdkfd: - Migrate TLB flushing logic to amdgpu - Trap handler fixes - Fix restore workers handling on suspend/resume - Fix possible memory leak in pqm_uninit() - support import/export of dma-bufs using GEM handles radeon: - fix possible overflows in command buffer checking - check for errors in ring_lock i915: - reorg display code for reuse in xe driver - fdinfo memory stats printing - DP MST bandwidth mgmt improvements - DP panel replay enabling - MTL C20 phy state verification - MTL DP DSC fractional bpp support - Audio fastset support - use dma_fence interfaces instead of i915_sw_fence - Separate gem and display code - AUX register macro refactoring - Separate display module/device parameters - Move display capabilities debugfs under display - Makefile cleanups - Register cleanups - Move display lock inits under display/ - VLV/CHV DPIO PHY register and interface refactoring - DSI VBT sequence refactoring - C10/C20 PHY PLL hardware readout - DPLL code cleanups - Cleanup PXP plane protection checks - Improve display debug msgs - PSR selective fetch fixes/improvements - DP MST fixes - Xe2LPD FBC restrictions removed - DGFX uses direct VBT pin mapping - more MTL WAs - fix MTL eDP bug - eliminate use of kmap_atomic habanalabs: - sysfs entry to identify a device minor id with debugfs path - sysfs entry to expose device module id - add signed device info retrieval through INFO ioctl - add Gaudi2C device support - pcie reset prepare/done hooks msm: - Add support for SDM670, SM8650 - Handle the CFG interconnect to fix the obscure hangs / timeouts - Kconfig fix for QMP dependency - use managed allocators - DPU: SDM670, SM8650 support - DPU: Enable SmartDMA on SM8350 and SM8450 - DP: enable runtime PM support - GPU: add metadata UAPI - GPU: move devcoredumps to GPU device - GPU: convert to drm_exec ivpu: - update FW API - new debugfs file - a new NOP job submission test mode - improve suspend/resume - PM improvements - MMU PT optimizations - firmware profile frequency support - support for uncached buffers - switch to gem shmem helpers - replace kthread with threaded irqs rockchip: - rk3066_hdmi: convert to atomic - vop2: support nv20 and nv30 - rk3588 support mediatek: - use devm_platform_ioremap_resource - stop using iommu_present - MT8188 VDOSYS1 display support panfrost: - PM improvements - improve interrupt handling as poweroff qaic: - allow to run with single MSI - support host/device time sync - switch to persistent DRM devices exynos: - fix potential error pointer dereference - fix wrong error checking - add missing call to drm_atomic_helper_shutdown omapdrm: - dma-fence lockdep annotation fix tidss: - dma-fence lockdep annotation fix - support for AM62A7 v3d: - BCM2712 - rpi5 support - fdinfo + gputop support - uapi for CPU job handling virtio-gpu: - add context debug name" * tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits) drm/amd/display: Allow z8/z10 from driver drm/amd/display: fix bandwidth validation failure on DCN 2.1 drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm drm/amd/display: Fix recent checkpatch errors in amdgpu_dm Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole" drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings() drm/amd/display: Fix power_helpers.c codestyle drm/amd/display: Fix hdcp_log.h codestyle drm/amd/display: Fix hdcp2_execution.c codestyle drm/amd/display: Fix hdcp_psp.h codestyle drm/amd/display: Fix freesync.c codestyle drm/amd/display: Fix hdcp_psp.c codestyle drm/amd/display: Fix hdcp1_execution.c codestyle drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()' drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()' drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()' drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()' ...
2024-01-11Merge tag 'soc-drivers-6.8' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "A new drivers/cache/ subsystem is added to contain drivers for abstracting cache flush methods on riscv and potentially others, as this is needed for handling non-coherent DMA but several SoCs require nonstandard hardware methods for it. op-tee gains support for asynchronous notification with FF-A, as well as support for a system thread for executing in secure world. The tee, reset, bus, memory and scmi subsystems have a couple of minor updates. Platform specific soc driver changes include: - Samsung Exynos gains driver support for Google GS101 (Tensor G1) across multiple subsystems - Qualcomm Snapdragon gains support for SM8650 and X1E along with added features for some other SoCs - Mediatek adds support for "Smart Voltage Scaling" on MT8186 and MT8195, and driver support for MT8188 along with some code refactoring. - Microchip Polarfire FPGA support for "Auto Update" of the FPGA bitstream - Apple M1 mailbox driver is rewritten into a SoC driver - minor updates on amlogic, mvebu, ti, zynq, imx, renesas and hisilicon" * tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits) memory: ti-emif-pm: Convert to platform remove callback returning void memory: ti-aemif: Convert to platform remove callback returning void memory: tegra210-emc: Convert to platform remove callback returning void memory: tegra186-emc: Convert to platform remove callback returning void memory: stm32-fmc2-ebi: Convert to platform remove callback returning void memory: exynos5422-dmc: Convert to platform remove callback returning void memory: renesas-rpc-if: Convert to platform remove callback returning void memory: omap-gpmc: Convert to platform remove callback returning void memory: mtk-smi: Convert to platform remove callback returning void memory: jz4780-nemc: Convert to platform remove callback returning void memory: fsl_ifc: Convert to platform remove callback returning void memory: fsl-corenet-cf: Convert to platform remove callback returning void memory: emif: Convert to platform remove callback returning void memory: brcmstb_memc: Convert to platform remove callback returning void memory: brcmstb_dpfe: Convert to platform remove callback returning void soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset firmware: qcom: qseecom: fix memory leaks in error paths dt-bindings: clock: google,gs101: rename CMU_TOP gate defines soc: qcom: llcc: Fix typo in kernel-doc dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel ...
2024-01-10Merge tag 'linux_kselftest-kunit-6.8-rc1' of ↵Linus Torvalds1-8/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan: - a new feature that adds APIs for managing devices introducing a set of helper functions which allow devices (internally a struct kunit_device) to be created and managed by KUnit. These devices will be automatically unregistered on test exit. These helpers can either use a user-provided struct device_driver, or have one automatically created and managed by KUnit. In both cases, the device lives on a new kunit_bus. - changes to switch drm/tests to use kunit devices - several fixes and enhancements to attribute feature - changes to reorganize deferred action function introducing KUNIT_DEFINE_ACTION_WRAPPER - new feature adds ability to run tests after boot using debugfs - fixes and enhancements to string-stream-test: - parse ERR_PTR in string_stream_destroy() - unchecked dereference in bug fix in debugfs_print_results() - handling errors from alloc_string_stream() - NULL-dereference bug fix in kunit_init_suite() * tag 'linux_kselftest-kunit-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (27 commits) kunit: Fix some comments which were mistakenly kerneldoc kunit: Protect string comparisons against NULL kunit: Add example of kunit_activate_static_stub() with pointer-to-function kunit: Allow passing function pointer to kunit_activate_static_stub() kunit: Fix NULL-dereference in kunit_init_suite() if suite->log is NULL kunit: Reset test->priv after each param iteration kunit: Add example for using test->priv drm/tests: Switch to kunit devices ASoC: topology: Replace fake root_device with kunit_device in tests overflow: Replace fake root_device with kunit_device fortify: test: Use kunit_device kunit: Add APIs for managing devices Documentation: Add debugfs docs with run after boot kunit: add ability to run tests after boot using debugfs kunit: add is_init test attribute kunit: add example suite to test init suites kunit: add KUNIT_INIT_TABLE to init linker section kunit: move KUNIT_TABLE out of INIT_DATA kunit: tool: add test for parsing attributes kunit: tool: fix parsing of test attributes ...
2024-01-08Merge tag 'asoc-v6.8' of ↵Takashi Iwai187-2770/+5163
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v6.8 This is a relatively quiet release, there's a lot of driver specific changes and the usual high level of activity in the SOF core but the one big core change was Mormioto-san's work to support more N:M CPU:CODEC mapping cases. Highlights include: - Enhanced support for N:M CPU:CODEC mappings in the core and in audio-graph-card2. - Support for falling back to older SOF IPC versions where firmware for new versions is not available. - Support for notification of control changes generated by SOF firmware with IPC4. - Device tree support for describing parts of the card which can be active over suspend (for very low power playback or wake word use cases). - ACPI parsing support for the ES83xx driver, reducing the number of quirks neede for x86 systems. - Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm SM8250, SM8550, SM8650 and X1E80100. - Removal of Freescale MPC8610 support, the SoC is no longer supported by Linux.
2024-01-08Merge branch 'for-next' into for-linusTakashi Iwai16-42/+186
Prepare for 6.8 merge. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-04Merge tag 'asoc-fix-v6.7-rc8' of ↵Takashi Iwai4-5/+20
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.7 I recently got a LibreTech Sapphire board for my CI and while integrating it found and fixed some issues, including crashes for the enum validation. There's also a couple of patches adding quirks for another x86 laptop from Hans and an error handling fix for the Freescale rpmsg driver.
2024-01-03ASoC: meson: g12a-tohdmitx: Fix event generation for S/PDIF muxMark Brown1-1/+1
When a control changes value the return value from _put() should be 1 so we get events generated to userspace notifying applications of the change. While the I2S mux gets this right the S/PDIF mux does not, fix the return value. Fixes: c8609f3870f7 ("ASoC: meson: add g12a tohdmitx control") Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-4-424af7a8fb91@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-03ASoC: meson: g12a-toacodec: Fix event generationMark Brown1-1/+1
When a control changes value the return value from _put() should be 1 so we get events generated to userspace notifying applications of the change. We are checking if there has been a change and exiting early if not but we are not providing the correct return value in the latter case, fix this. Fixes: af2618a2eee8 ("ASoC: meson: g12a: add internal DAC glue driver") Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-3-424af7a8fb91@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-03ASoC: meson: g12a-tohdmitx: Validate written enum valuesMark Brown1-0/+6
When writing to an enum we need to verify that the value written is valid for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't do it since it needs to return an unsigned (and in any case we'd need to check the return value). Fixes: c8609f3870f7 ("ASoC: meson: add g12a tohdmitx control") Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-2-424af7a8fb91@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-03ASoC: meson: g12a-toacodec: Validate written enum valuesMark Brown1-0/+3
When writing to an enum we need to verify that the value written is valid for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't do it since it needs to return an unsigned (and in any case we'd need to check the return value). Fixes: af2618a2eee8 ("ASoC: meson: g12a: add internal DAC glue driver") Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-1-424af7a8fb91@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-03ASoC: SOF: Intel: hda-codec: Delay the codec device registrationPeter Ujfalusi1-9/+9
The current code flow is: 1. snd_hdac_device_register() 2. set parameters needed by the hdac driver 3. request_codec_module() the hdac driver is probed at this point During boot the codec drivers are not loaded when the hdac device is registered, it is going to be probed later when loading the codec module, which point the parameters are set. On module remove/insert rmmod snd_sof_pci_intel_tgl modprobe snd_sof_pci_intel_tgl The codec module remains loaded and the driver will be probed when the hdac device is created right away, before the parameters for the driver has been configured: 1. snd_hdac_device_register() the hdac driver is probed at this point 2. set parameters needed by the hdac driver 3. request_codec_module() will be a NOP as the module is already loaded Move the snd_hdac_device_register() later, to be done right before requesting the codec module to make sure that the parameters are all set before the device is created: 1. set parameters needed by the hdac driver 2. snd_hdac_device_register() 3. request_codec_module() This way at the hdac driver probe all parameters will be set in all cases. Link: https://github.com/thesofproject/linux/issues/4731 Fixes: a0575b4add21 ("ASoC: hdac_hda: Conditionally register dais for HDMI and Analog") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20231207095425.19597-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/ZYvUIxtrqBQZbNlC@shine.dominikbrodowski.net Link: https://bugzilla.kernel.org/show_bug.cgi?id=218304 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-02ALSA: hda/tas2781: add ptrs to calibration functionsGergo Koteles1-0/+15
Make calibration functions configurable to support different calibration data storage modes. Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/5859c77ffef752b8a9784713b412d815d7e2688c.1703891777.git.soyer@irl.hu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ASoC: pxa: sspa: Don't select SND_ARMDuje Mihanović1-1/+0
On ARM64 platforms, SND_ARM shouldn't be selectable, but enabling SND_SOC_MMP_SSPA will enable SND_ARM and cause build errors if SND_ARMAACI is enabled (which it is by default). Since the SSPA driver doesn't depend on AACI nor PXA2XX_LIB, remove this false dependency. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310230518.zs9Qpg3j-lkp@intel.com/ Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Link: https://lore.kernel.org/r/20231226200025.30870-1-duje.mihanovic@skole.hr Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-29ASoC: rt5663: cancel the work when system suspendsShuming Fan1-0/+11
This patch makes sure that the workqueue is completed before the system suspends. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20231229092922.853-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-29ASoC: mediatek: mt8186: fix AUD_PAD_TOP register and offsetEugen Hristev1-1/+1
AUD_PAD_TOP widget's correct register is AFE_AUD_PAD_TOP , and not zero. Having a zero as register, it would mean that the `snd_soc_dapm_new_widgets` would try to read the register at offset zero when trying to get the power status of this widget, which is incorrect. Fixes: b65c466220b3 ("ASoC: mediatek: mt8186: support adda in platform driver") Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Link: https://lore.kernel.org/r/20231229114342.195867-1-eugen.hristev@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-29Merge branch 'topic/cs35l41' into for-nextTakashi Iwai37-146/+401
Pull CS35L41 codec extension series. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: hda/tas2781: move set_drv_data outside tasdevice_initGergo Koteles2-2/+2
allow driver specific driver data in tas2781-hda-i2c and tas2781-i2c Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver") CC: stable@vger.kernel.org Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/1398bd8bf3e935b1595a99128320e4a1913e210a.1703204848.git.soyer@irl.hu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: hda/tas2781: do not use regcacheGergo Koteles1-1/+1
There are two problems with using regcache in this module. The amplifier has 3 addressing levels (BOOK, PAGE, REG). The firmware contains blocks that must be written to BOOK 0x8C. The regcache doesn't know anything about BOOK, so regcache_sync writes invalid values to the actual BOOK. The module handles 2 or more separate amplifiers. The amplifiers have different register values, and the module uses only one regmap/regcache for all the amplifiers. The regcache_sync only writes the last amplifier used. The module successfully restores all the written register values (RC profile, program, configuration, calibration) without regcache. Remove regcache functions and set regmap cache_type to REGCACHE_NONE. Link: https://lore.kernel.org/r/21a183b5a08cb23b193af78d4b1114cc59419272.1701906455.git.soyer@irl.hu/ Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") Acked-by: Mark Brown <broonie@kernel.org> CC: stable@vger.kernel.org Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/491aeed0e2eecc3b704ec856f815db21bad3ba0e.1703202126.git.soyer@irl.hu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ASoC: SOF: imx: Add SNDRV_PCM_INFO_BATCH flagShengjiu Wang3-0/+3
The sof imx pcm device is a device which should support double buffering. Found this issue with pipewire. When there is no SNDRV_PCM_INFO_BATCH flag in driver, the pipewire will set headroom to be zero, and because sof pcm device don't support residue report, when the latency setting is small, the "delay" always larger than "target" in alsa-pcm.c, that reading next period data is not scheduled on time. With SNDRV_PCM_INFO_BATCH flag in driver, the pipewire will select a smaller period size for device, then the task of reading next period data will be scheduled on time. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1703669263-13832-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-29ASoC: fsl_rpmsg: Fix error handler with pm_runtime_enableChancel Liu1-2/+8
There is error message when defer probe happens: fsl_rpmsg rpmsg_audio: Unbalanced pm_runtime_enable! Fix the error handler with pm_runtime_enable. Fixes: b73d9e6225e8 ("ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg") Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20231225080608.967953-1-chancel.liu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-22ASoC: Intel: cht_bsw_rt5645: Set card.components stringHans de Goede1-0/+8
Set the card.components string using the new rt5645_components() helper which returns a components string based on the DMI quirks inside the rt5645 codec driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://msgid.link/r/20231126214024.300505-8-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-22ASoC: rt5645: Add mono speaker information to the components stringHans de Goede1-1/+13
The GPD Win and Teclast X80 Pro both only have 1 speaker add information about this to the components string. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://msgid.link/r/20231126214024.300505-7-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-22ASoC: rt5645: Add a rt5645_components() helperHans de Goede2-0/+27
The rt5645 codec driver uses DMI quirks to configure the DMIC data-pins, which means that it knows which DMIC interface is used on a specific device. ATM we duplicate this DMI matching inside the UCM profiles to select the right DMIC interface. Add a rt5645_components() helper which the machine-driver can use to set the components string of the card so that UCM can get the info from the components string. This way we only need to add new DMI quirks in one place. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://msgid.link/r/20231126214024.300505-6-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-22ASoC: rt5645: Add rt5645_get_pdata() helperHans de Goede1-25/+26
Add a rt5645_get_pdata() helper function which retreives the platform-data and overrides it with the quirks module parameter if that is set. This is a preparation patch for adding the rt5645_components() function. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://msgid.link/r/20231126214024.300505-5-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-22ASoC: rt5645: Refactor rt5645_parse_dt()Hans de Goede1-12/+6
Refactor rt5645_parse_dt(), make it take a pointer to struct rt5645_platform_data as argument instead of passing in the complete rt5645_priv struct. While at it also make it void since it always succeeds. This is a preparation patch for factoring the code to get the platform-data out into a separate helper function. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://msgid.link/r/20231126214024.300505-4-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-22ASoC: rt5645: Add platform-data for Acer Switch V 10Hans de Goede1-0/+8
The Acer Switch V 10 uses the default jack-detect mode 3, but instead of using an analog microphone it is using a DMIC on dmic-data-pin 1, like other models following Intel's Braswell's reference design. Add a DMI quirk pointing to the intel_braswell_platform_data for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://msgid.link/r/20231126214024.300505-3-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-22ASoC: rt5645: Drop double EF20 entry from dmi_platform_data[]Hans de Goede1-8/+0
dmi_platform_data[] first contains a DMI entry matching: DMI_MATCH(DMI_PRODUCT_NAME, "EF20"), and then contains an identical entry except for the match being: DMI_MATCH(DMI_PRODUCT_NAME, "EF20EA"), Since these are partial (non exact) DMI matches the first match will also match any board with "EF20EA" in their DMI product-name, drop the second, redundant, entry. Fixes: a4dae468cfdd ("ASoC: rt5645: Add ACPI-defined GPIO for ECS EF20 series") Cc: Chris Chiu <chiu@endlessos.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://msgid.link/r/20231126214024.300505-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-21Merge tag 'asoc-fix-v6.7-rc7' of ↵Takashi Iwai10-39/+115
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.7 Quite a big collection of fixes, as ever mostly in drivers. There's one framework fix for the HDMI CODEC where it wasn't handling startup properly for some controllers, and one new x86 quirk, but otherwise all local fixes or dropping things we don't want to see in a release.
2023-12-19ASoC: qcom: add sound card support for SM8650Mark Brown1-0/+1
Merge series from Neil Armstrong <neil.armstrong@linaro.org>: Document the SM8650 sound card using the SM8450 fallback and add the SM8650 compatible to the sc8280xp sound card driver to use the sm8650 card driver_name like SM8450 & SM8550.
2023-12-19add es8326 dt-bindings, commonize headset codecMark Brown2-64/+62
Merge series from Rui Zhou <zhourui@huaqin.corp-partner.google.com>: Add dt-bindings for es8326 and codec es8326 support. Remove duplicate code, commonize headset codec init/exit API. At the same time, Enable dual amp max98390 for rt5682s.
2023-12-19Improve AMD ACP Vangogh audio support for Steam DeckMark Brown4-30/+26
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>: This patch series provides several fixes and improvements to AMD ACP drivers targeting the Vangogh platform, as found on the Valve's new Steam Deck OLED. Although in theory the board should have been supported by both SOF and legacy ACP drivers, as of next-20231208 the audio seems to be completely broken. Please note this only restores the legacy support, while SOF will be handled in a separate series.
2023-12-19ASoC: don't use original dummy dlcMark Brown5-11/+29
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: "Empty" dlc might be used on Platform, but "dummy" dlc is not needed for it. [PATCH 1/5][PATCH 2/5] removes "dummy" dlc from Platform. Now ASoC have common dummy dlc (= snd_soc_dummy_dlc). [PATCH 3/5][PATCH 4/5] will use it instead of original dummy dlc. Many drivers are using below macro SND_SOC_DAILINK_DEFS(link, DAILINK_COMP_ARRAY(COMP_CPU(...)), (X) DAILINK_COMP_ARRAY(COMP_DUMMY()), DAILINK_COMP_ARRAY(COMP_EMPTY())); But (X) part will create original dummy dlc. [PATCH 5/5] will try not to create original dummy dlc, and replace it to common dummy dlc.
2023-12-19GPIO inclusion fixes to misc sound driversMark Brown7-36/+28
Merge series from Linus Walleij <linus.walleij@linaro.org>: Mostly dropping unused headers, and a single driver rewrite.
2023-12-19ASoC: sprd: Simplify memory allocation in sprd_platform_compr_dma_config()Christophe JAILLET1-3/+3
'sg' is freed at the end sprd_platform_compr_dma_config() both in the normal and in the error handling path. There is no need to use the devm_kcalloc()/devm_kfree(), kcalloc()/kfree() is enough. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://msgid.link/r/d16f22ae0627249a9fc658927832590cd88c544e.1702960856.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-19ASoC: SOF: amd: Add acp-psp mailbox interface for iram-dram fence register ↵Venkata Prasad Potturu2-0/+16
modification Add acp-psp mailbox communication interface for iram-dram size modification to notify psp. Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://msgid.link/r/20231219112416.3334928-5-venkataprasad.potturu@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-19ASoC: SOF: Rename amd_bt sof_dai_typeVenkata Prasad Potturu1-1/+1
Rename amd_bt sof_dai_type from ACP to ACP_BT. Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://msgid.link/r/20231219112416.3334928-4-venkataprasad.potturu@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-19ASoC: SOF: Add i2s bt dai configuration support for AMD platformsVenkata Prasad Potturu1-0/+1
Add support for i2s bt dai configuration from topology. Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://msgid.link/r/20231219112416.3334928-3-venkataprasad.potturu@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-19ASoC: SOF: Refactor sof_i2s_tokens reading to update acpbt daiVenkata Prasad Potturu1-4/+7
Refactor sof_i2s_tokens reading to update config->acpbt. Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://msgid.link/r/20231219112416.3334928-2-venkataprasad.potturu@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-19ASoC: SOF: amd: Refactor spinlock_irq(&sdev->ipc_lock) sequence in irq_handlerVenkata Prasad Potturu2-3/+4
Refactor spinlock_irq(&sdev->ipc_lock) sequence in irq_handler to avoid race conditions for acquiring hw_semaphore. Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://msgid.link/r/20231219112416.3334928-1-venkataprasad.potturu@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-19ASoC: soc.h: don't create dummy Component via COMP_DUMMY()Kuninori Morimoto1-0/+24
Many ASoC drivers define CPU/Codec/Platform dai_link by below macro. SND_SOC_DAILINK_DEFS(link, (A) DAILINK_COMP_ARRAY(COMP_CPU("cpu_dai")), (B) DAILINK_COMP_ARRAY(COMP_CODEC("codec", "dai1"), (B) COMP_CODEC("codec", "dai2")), (C) DAILINK_COMP_ARRAY(COMP_EMPTY())); In this case, this macro will be converted to like below [o] = static struct snd_soc_dai_link_component (A) [o] link_cpus[] = {{ .dai_name = "cpu_dai" }}; (B) [o] link_codecs[] = {{ .dai_name = "dai1", .name = "codec" }, { .dai_name = "dai2", .name = "codec" }} (C) [o] link_platforms[] = {{ }}; CPU and Codec info will be filled by COMP_CPU() / COMP_CODEC (= A,B), and Platform will have empty data by COMP_EMPTY() (= C) in this case. Platform empty info will be filled when driver probe() (most of case, CPU info will be copied to use soc-generic-dmaengine-pcm). For example in case of DPCM FE/BE, it will be like below. Codec will be dummy Component / DAI in this case (X). SND_SOC_DAILINK_DEFS(link, DAILINK_COMP_ARRAY(COMP_CPU(...)), (X) DAILINK_COMP_ARRAY(COMP_DUMMY()), DAILINK_COMP_ARRAY(COMP_EMPTY())); (X) part will converted like below [o] link_codecs[] = {{ .name = "snd-soc-dummy", .dai_name = "snd-soc-dummy-dai", }} Even though we already have common asoc_dummy_dlc for dummy Component / DAI, this macro will re-create new dummy dlc. Some drivers defines many dai_link info via SND_SOC_DAILINK_DEFS(), this means many dummy dlc also will be re-created. This is waste of memory. If we can use existing common asoc_dummy_dlc at (X), we can avoid to re-creating dummy dlc, then, we can save the memory. At that time, we want to keep existing code as much as possible, because too many drivers are using this macro. But because of its original style, using common asoc_dummy_dlc from it is very difficult or impossible. So let's change the mind. The macro is used like below SND_SOC_DAILINK_DEFS(link, DAILINK_COMP_ARRAY(COMP_CPU(...)), (x) DAILINK_COMP_ARRAY(COMP_DUMMY()), DAILINK_COMP_ARRAY(COMP_EMPTY())); static struct snd_soc_dai_link dai_links[] = { { .name = ..., .stream_name = ..., (y) SND_SOC_DAILINK_REG(link), }, (y) part will be like below static struct snd_soc_dai_link dai_links[] = { { .name = ..., .stream_name = ..., ^ ... | .codecs = link_codecs, (y) .num_codecs = ARRAY_SIZE(link_codecs), v ... } This patch try to use trick on COMP_DUMMY() - #define COMP_DUMMY() { .name = "snd-soc-dummy", .dai_name = "snd-soc-dummy-dai", } + #define COMP_DUMMY() By this tric, (x) part will be like below. before [o] link_codecs[] = {{ .name = "snd-soc-dummy", .dai_name = "snd-soc-dummy-dai", }} after [o] link_codecs[] = { }; This is same as below [o] link_codecs[0]; This means it has pointer (link_codecs), but the array size is 0. (y) part will be like below. static struct snd_soc_dai_link dai_links[] = { { ... .codecs = link_codecs, .num_codecs = 0, ... }, This is very special settings that normal use usually not do, but new macro do. We can find this special settings on soc-core.c and fill it as "dummy DAI" (= asoc_dummy_dlc). By this tric, we can avoid to re-create dummy dlc and save the memory. This patch add tric at COMP_DUMMY() and add snd_soc_fill_dummy_dai() to fill dummy DAI. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://msgid.link/r/871qbi93qu.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-19ASoC: sof: use snd_soc_dummy_dlcKuninori Morimoto1-3/+1
We already have snd_soc_dummy_dlc. Let's use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://msgid.link/r/8734vy93r8.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-19ASoC: intel: hdaudio.c: use snd_soc_dummy_dlcKuninori Morimoto1-4/+2
We already have snd_soc_dummy_dlc. Let's use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://msgid.link/r/874jge93ri.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-19ASoC: samsung: odroid: don't need DUMMY PlatformKuninori Morimoto1-2/+1
We can use SND_SOC_DAILINK_REG() with 2 parameter. DUMMY Platform is not needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://msgid.link/r/875y0u93rq.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-19ASoC: fsl: fsl-asoc-card: don't need DUMMY PlatformKuninori Morimoto1-2/+1
We can use SND_SOC_DAILINK_REG() with 2 parameter. DUMMY Platform is not needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://msgid.link/r/877cla93ry.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-19ASoC: fsl_sai: Fix channel swap issue on i.MX8MPShengjiu Wang1-0/+3
When flag mclk_with_tere and mclk_direction_output enabled, The SAI transmitter or receiver will be enabled in very early stage, that if FSL_SAI_xMR is set by previous case, for example previous case is one channel, current case is two channels, then current case started with wrong xMR in the beginning, then channel swap happen. The patch is to clear xMR in hw_free() to avoid such channel swap issue. Fixes: 3e4a82612998 ("ASoC: fsl_sai: MCLK bind with TX/RX enable bit") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://msgid.link/r/1702953057-4499-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-19ASoC: hdmi-codec: fix missing report for jack initial statusJerome Brunet1-2/+10
This fixes a problem introduced while fixing ELD reporting with no jack set. Most driver using the hdmi-codec will call the 'plugged_cb' callback directly when registered to report the initial state of the HDMI connector. With the commit mentionned, this occurs before jack is ready and the initial report is lost for platforms actually providing a jack for HDMI. Fix this by storing the hdmi connector status regardless of jack being set or not and report the last status when jack gets set. With this, the initial state is reported correctly even if it is disconnected. This was not done initially and is also a fix. Fixes: 15be353d55f9 ("ASoC: hdmi-codec: register hpd callback on component probe") Reported-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com> Closes: https://lore.kernel.org/alsa-devel/CADYyEwTNyY+fR9SgfDa-g6iiDwkU3MUdPVCYexs2_3wbcM8_vg@mail.gmail.com/ Cc: Hsin-Yi Wang <hsinyi@google.com> Tested-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://msgid.link/r/20231218145655.134929-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-18ASoC: topology: Replace fake root_device with kunit_device in testsdavidgow@google.com1-8/+2
Using struct root_device to create fake devices for tests is something of a hack. The new struct kunit_device is meant for this purpose, so use it instead. Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18ASoC: amd: acp: Remove redundant ret variableHimanshu Bhavani1-2/+1
Removed Unneeded variable: "ret" Signed-off-by: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io> Link: https://msgid.link/r/20231218143214.939885-1-himanshu.bhavani@siliconsignals.io Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-18ASoC: tas2781: add support for FW version 0x0503Gergo Koteles1-0/+1
Layout of FW version 0x0503 is compatible with 0x0502. Already supported by TI's tas2781-linux-driver tree. https://git.ti.com/cgit/tas2781-linux-drivers/tas2781-linux-driver/ Fixes: 915f5eadebd2 ("ASoC: tas2781: firmware lib") Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://msgid.link/r/98d4ee4e01e834af72a1a0bea6736facf43582e0.1702513517.git.soyer@irl.hu Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-29 01:05:46 +0300