summaryrefslogtreecommitdiff
path: root/sound/soc/intel
AgeCommit message (Collapse)AuthorFilesLines
2018-01-10ASoC: Intel: remove mfld_machineVinod Koul2-444/+0
mfld_machine was not getting compiled due to missed Makefile changes. Since no one complained it is safe to assume that it is not being used, so remove it Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: kconfig: drop boiler plate text from config itemsVinod Koul2-26/+26
Drop "Intel ASoC SST driver for " platforms and "SOC Machine Audio driver for Intel" for machines.. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: kconfig: add some comments for if symbolsVinod Koul1-5/+5
Help in finding matching "if" endings by commenting the "endif". Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: boards: align/fix SKL/BXT/KBL KconfigsPierre-Louis Bossart1-9/+8
No reason why SND_SOC_INTEL_SST should be set here. Also make sure same dependencies are used everywhere (only last one has SPI in addition). Replace X86_INTEL_LPSS by MFD_INTEL_LPSS since the former makes no sense for Skylake+ devices Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: boards: align Kconfig configurations for HiFi2Pierre-Louis Bossart1-14/+19
Make sure all the configs are aligned Also add the missing dependencies on SOC_ACPI stuff used to fix DAI names based on HID and fix a couple of indentation issues Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: boards: align Kconfig dependencies for Haswell/BroadwellPierre-Louis Bossart1-1/+1
Make sure that the same I2C/I2C_DESIGNWARE_PLATFORM are selected. The latter might actually need to be moved to the SOC side of things, it really has no place in a machine driver dependency Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: Fix nested/unnecessary Kconfig dependenciesPierre-Louis Bossart1-3/+3
This patch fixes a number of issues: 1. IOSF_MBI is only needed for byt-cr detection, which is only supported on Baytrail/Cherrytrail, move to HiFi2 config 2. SND_SOC_INTEL_SST should not select SND_SOC_INTEL_SST_ACPI, the latter config is only valid for Haswell/Baytrail legacy but not needed by Skylake 3. SND_SST_IPC_ACPI, used only by the atom/sst driver, should not select SND_SOC_INTEL_SST, none of the code under common/sst*.c is used This nesting of configs really makes no sense, it's easier to maintain if for each platform one can control what is strictly required. Compiled-tested with each of Haswell, Baytrail legacy, HiFi2, SKL cases selected independently. 0-day and explicit randconfig tests did not report additional issues and no functionality loss was observed in Intel tests on HIFI2 and SKYLAKE platforms Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: document what Kconfig options doPierre-Louis Bossart1-3/+14
Document in comments what the options are supposed to mean, before clean-up in next patch. No functionality change here. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: Kconfig: Simplify-clarify ACPI/PCI dependenciesPierre-Louis Bossart2-14/+27
PCI/ACPI selections should not happen in Kconfig for machine drivers, move to SOC selections. Add distinction between PCI and ACPI HiFi2 platforms and help text. There should be no functionality change. The PCI-based platforms may be removed at some point since Medfield is not really supported by anyone, and with Edison now defunct support for Merrifield/Edison is to be determined. The dependency on SND_DMA_SGBUF for Haswell is not clear at this point and may have to be further updated. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: Fix Kconfig with top-level selectorPierre-Louis Bossart3-65/+97
Follow network example suggested by Linus, move Intel definitions in if/endif block and clarify in help text which options distro configurations should enable - everything except legacy Baytrail stuff and NOCODEC (test only) To avoid user confusion, machine drivers are handled with a submenu made dependent on this top-level selector. There should be no functionality change - except that sound capabilities are restored when using older configs without any user selection. Note that the SND_SOC_ACPI_INTEL_MATCH config is currently filtered out by the top-level selector. This will change in the near future to allow for this option to be selected by both SST and SOF drivers (simplification with submenu for machine drivers by Vinod Koul) Fixes: f6a118a800e3 ("ASoC: Intel: clarify Kconfig dependencies") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: bytcr-rt5651: add support for Line InPierre-Louis Bossart1-0/+6
Add the DAPM widgets and routes. Tested with MinnowMax Turbot + rt5651 eval board with Speaker (LineOut) -> LineIn loopback Thanks to Bard Liao @ Realtek for providing the 0dB settings "IN Capture Volume" = 23 "ADC Capture Volume" = 47 "OUT Playback Volume" = 31 "DAC1 Playback Volume" = 175 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: bytcr-rt5651: enable MinnowBoard Turbot quirksPierre-Louis Bossart1-0/+9
Define DMI quirk for rt5651 eval board connected to MinnowBoard Turbot. The only difference with a MinnowBoard MAX is that the MCLK pin is enabled on the LSE connector Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Keqiao.Zhang <Keqiao.zhang@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: bytcr-rt5651: add quirk for IN3P which may also be usedKeyon Jie1-2/+14
On Minnowboard Max with Realtek rt5651 eval board, the IN3P is connected to Headset Mic. Here add and select it for Minnowboard Max. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: bytcr_rt5651: fix Kiano DMI quirkPierre-Louis Bossart1-1/+2
The current code doesn't enable the MCLK which reduces audio quality (PLL driven from BLCK), fix the quirk Tested-by: Carlo Caione <carlo@caione.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: sst: Fix some styleChristophe JAILLET1-3/+3
This patch fixes 3 small issues: - missing 2nd '*' at the beginning of a doxygen comment - extra space after a '\n' in a dev_dbg message - extra tab before a 'return" statement Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: sst: Fix the return value of 'sst_send_byte_stream_mrfld()'Christophe JAILLET1-1/+1
In some error handling paths, an error code is assiegned to 'ret'. However, the function always return 0. Fix it and return the error code if such an error paths is taken. Fixes: 3d9ff34622ba ("ASoC: Intel: sst: add stream operations") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08Merge branch 'fix/intel' of ↵Mark Brown16-69/+93
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2018-01-03ASoC: skl: Fix kernel warning due to zero NHTL entryTakashi Iwai1-1/+2
I got the following kernel warning when loading snd-soc-skl module on Dell Latitude 7270 laptop: memremap attempted on mixed range 0x0000000000000000 size: 0x0 WARNING: CPU: 0 PID: 484 at kernel/memremap.c:98 memremap+0x8a/0x180 Call Trace: skl_nhlt_init+0x82/0xf0 [snd_soc_skl] skl_probe+0x2ee/0x7c0 [snd_soc_skl] .... It seems that the machine doesn't support the SKL DSP gives the empty NHLT entry, and it triggers the warning. For avoiding it, let do the zero check before calling memremap(). Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03ASoC: Intel: Skylake: Disable clock gating during firmware and library downloadPardha Saradhi K2-0/+8
During firmware and library download, sometimes it is observed that firmware and library download is timed-out resulting into probe failure. This patch disables dynamic clock gating while firmware and library download. Signed-off-by: Pardha Saradhi K <pardha.saradhi.kesapragada@intel.com> Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03ASoC: Intel: cht_bsw_rt5645: Analog Mic supportHans de Goede1-0/+7
Various Cherry Trail boards with a rt5645 codec have an analog mic connected to IN2P + IN2N. The mic on this boards also needs micbias to be enabled, on some boards micbias1 is used and on others micbias2, so we enable both. This commit adds a new "Int Analog Mic" DAPM widget for this, so that we do not end up enabling micbias on boards with a digital mic which uses the already present "Int Mic" widget. Some existing UCM files already refer to "Int Mic" for their "Internal Analog Microphones" SectionDevice, but these don't work anyways since they enable the RECMIX BST1 Switch instead of the BST2 switch. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-20ASoC: Intel: Skylake: Ensure dai and dailink registration happens in sequence.Pankaj Bharadiya2-18/+39
Platform registration happens in probe work handler whereas machine device is registered during skl_probe. This sometimes results in cpu dais not found if the work handler is sufficiently delayed due to system load, even with deferred probe of machine driver. So move machine device registration after registering platform. Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-20ASoC: Intel: Skylake: Request IRQ late only after all context are initializedSubhransu S. Prusty5-7/+14
Sometimes during boot, panic is observed at sst_dsp_shim_read_unlocked(). This happens when interrupt occurs before the context is initialized. So move the irq initialization only after the context is initialized completely. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Pawse, GuruprasadX <guruprasadx.pawse@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-11ASoC: Intel: Skylake: Re-order some code to silence a warningDan Carpenter1-2/+2
I get a Smatch warning here: sound/soc/intel/skylake/skl-nhlt.c:335 skl_get_ssp_clks() error: testing array offset 'j' after use. The code is harmless, but the checker is right that we should swap these two conditions so we verify that the offset is within bounds before we use it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-08ASoC: Intel: Change kern log level to avoid unwanted messagesNaveen Manohar1-1/+1
patch suppresses the warning message "control load not supported" as this is a debug information to help debug issues in topology. Signed-off-by: Naveen Manohar <naveen.m@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-06ASoC: Intel: Skylake: Do not check dev_type for dmic link typeGuneshwor Singh1-5/+10
Some BIOS have inconsistent dev_type value for DMIC link type. Since there is only one device type for DMIC link type, remove device type check if link type is NHLT_LINK_DMIC. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-06ASoC: Intel: Skylake: Configure DSP clock sourcePradeep Tewani3-0/+27
DSP clock source is configured by sending the A-State table to the FW. Add the large config set IPC to configure the desired clock source Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-06ASoC: Intel: Skylake: Parse vendor tokens to build A-State tablePradeep Tewani2-1/+60
A-State table is a power management table which allows the driver to configure the DSP clock source corresponding to various load thresholds. The table contains upto 3 A-State entries. The patch adds and parses the corresponding A-State tokens to build the table. Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-06ASoC: Intel: Skylake: Remove second shim read in register_pollSubhransu S. Prusty1-3/+1
No need to read the register again if the value read has already matched the target during the loop. So remove the second shim read. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-05ASoC: don't use rtd->codec on Intel/haswellKuninori Morimoto1-1/+1
rtd->codec will be removed soon. rtd->codec = rtd->codec_dai->codec, thus, we can use rtd->codec_dai->component instead of it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-05ASoC: don't use rtd->codec on intel/skylakeKuninori Morimoto1-2/+2
rtd->codec will be removed soon. rtd->codec = rtd->codec_dai->codec, thus, we can use rtd->codec_dai->component instead of it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-04ASoC: Intel: Skylake: Fix descriptions for exported function argsGuneshwor Singh1-2/+4
Fix a few incorrect descriptions for arguments in exported functions. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-04ASoC: Intel: Skylake: Make local functions staticGuneshwor Singh2-3/+3
Some functions are local to the source and do not need to be in global scope, so make them static. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01ASoC: intel: mfld: Handle return value of platform_get_irqArvind Yadav1-0/+2
platform_get_irq() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01ASoC: intel: sst: Handle return value of platform_get_irqArvind Yadav1-0/+3
platform_get_irq() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-29ASoC: intel: byt: Fix quirk for KIANO laptopCarlo Caione1-1/+1
This laptop has actually two different analog mics, no just one. Fix the quirk to reflect the correct configuration. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-29ASoC: intel: byt: Introduce new map for dual micsCarlo Caione1-0/+12
The RT5651 codec has 3 analog inputs. Some laptops have two different internal analog microphones on the external case. Add a new custom quirk mapping the two internal mics on IN1P / IN2P, leaving the headset mic on IN3P. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-29ASoC: Intel: Skylake: Parse nhlt and register clock deviceSriram Periyasamy5-0/+395
When NHLT endpoint is present for a SSP then we create clock for that SSP. MCLK is consistent across endpoints and configuration for an SSP, so query only for first endpoint for an SSP. For SCLK/SCLKFS, the best fit is queried from the NHLT configurations which matches the clock rate requested. Best fit is decided based on below: 1. If rate matches with multiple configurations, then the first configuration is selected. 2. If for a selected fs and bits_per_sample, there are multiple endpoint configuration match, then the configuration with max number of channels is selected. So, the user has to set the rate which fits max number of channels So we create a platform device and pass clock information parsed as platform data. Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Jaikrishna Nemallapudi <jaikrishnax.nemallapudi@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-27ASoC: Intel: kbl_rt5663_max98927: Map BTN_0 to KEY_PLAYPAUSEBenson Leung1-1/+1
The Android 3.5mm Headset jack specification mentions that BTN_0 should be mapped to KEY_MEDIA, but this is less logical than KEY_PLAYPAUSE, which has much broader userspace support. For example, the Chrome OS userspace now supports KEY_PLAYPAUSE to toggle play/pause of videos and audio, but does not handle KEY_MEDIA. Furthermore, Android itself now supports KEY_PLAYPAUSE equivalently, as the new USB headset spec requires KEY_PLAYPAUSE for BTN_0. https://source.android.com/devices/accessories/headset/usb-headset-spec Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-27ASoC: Intel: kbl_rt5663_rt5514_max98927: Map BTN_0 to KEY_PLAYPAUSEBenson Leung1-1/+1
The Android 3.5mm Headset jack specification mentions that BTN_0 should be mapped to KEY_MEDIA, but this is less logical than KEY_PLAYPAUSE, which has much broader userspace support. For example, the Chrome OS userspace now supports KEY_PLAYPAUSE to toggle play/pause of videos and audio, but does not handle KEY_MEDIA. Furthermore, Android itself now supports KEY_PLAYPAUSE equivalently, as the new USB headset spec requires KEY_PLAYPAUSE for BTN_0. https://source.android.com/devices/accessories/headset/usb-headset-spec Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-16ASoC: Intel: kbl: Modify map for Headset Playback to fix pop-noiseNaveen Manohar2-2/+2
Patch fixes wrong path in commit 0b06122fc8d0 ("ASoC: Intel: kbl: Add map for new DAIs for Multi-Playback & Echo Ref") which resulted in pop noise. Current topology for Headset results in unwanted pop noise, while switching from spk->hs at the start of Headset Playback. Hence re-introduced mixin-mixout dsp module in topology for headset playback pipe to fix the regression. And the corresponding modification for headset route is updated here. Fixes: 0b06122fc8d0 ("ASoC: Intel: kbl: Add map for new DAIs for Multi-Playback & Echo Ref") Signed-off-by: Naveen Manohar <naveen.m@intel.com> Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-15ASoC: Intel: Add help text for SND_SOC_INTEL_SST_TOPLEVELVinod Koul1-0/+5
Symbol SND_SOC_INTEL_SST_TOPLEVEL is user selectable so add the help text for this symbol. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-11Merge remote-tracking branch 'asoc/topic/intel' into asoc-nextMark Brown35-1277/+1535
2017-11-11Merge remote-tracking branch 'asoc/fix/intel' into asoc-linusMark Brown6-15/+26
2017-11-11Merge tag 'asoc-fix-v4.14-rc6' into asoc-linusMark Brown3-4/+6
ASoC: Fixes for v4.14 I've been quite lax in sending these due to conference season but here's a fairly large collection of ASoC updates. The one thing that's not device specific is Takashi's fix for races between delayed work and PCM destruction, otherwise everything is specific to an individual device. # gpg: Signature made Thu 26 Oct 2017 15:11:23 BST # gpg: using RSA key ADE668AA675718B59FE29FEA24D68B725D5487D0 # gpg: issuer "broonie@kernel.org" # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" [unknown] # gpg: aka "Mark Brown <broonie@debian.org>" [unknown] # gpg: aka "Mark Brown <broonie@kernel.org>" [unknown] # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" [unknown] # gpg: aka "Mark Brown <broonie@linaro.org>" [unknown] # gpg: aka "Mark Brown <Mark.Brown@linaro.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 3F25 68AA C269 98F9 E813 A1C5 C3F4 36CA 30F5 D8EB # Subkey fingerprint: ADE6 68AA 6757 18B5 9FE2 9FEA 24D6 8B72 5D54 87D0
2017-11-08ASoC: Intel: Skylake: Add dynamic module id supportSriram Periyasamy1-2/+21
Module id is a property of firmware manifest and can vary between platforms so use the uuid instead of module id for pins. Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-08ASoC: Intel: Skylake: Optimize UUID handling to fill pin infoSriram Periyasamy1-23/+23
Modify skl_tplg_get_uuid() to copy just UUID rather than only for module UUID and skl_tplg_fill_pin() to fill the pin info which can include UUID token also. Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-08ASoC: Intel: Skylake: Check for NHLT ACPI header signaturePankaj Bharadiya1-0/+9
In certain buggy BIOS acpi_evaluate_dsm() may not return the correct NHLT table, so check the NHLT table header signature before accessing it. Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-08ASoC: Intel: Skylake: Fix uuid_module memory leak in failure casePankaj Bharadiya1-4/+11
In the loop that adds the uuid_module to the uuid_list list, allocated memory is not properly freed in the error path free uuid_list whenever any of the memory allocation in the loop fails to avoid memory leak. Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-08ASoC: Intel: Skylake: Fix potential NULL pointer dereferencePankaj Bharadiya1-1/+2
Pointer 'mconfig' returned from call to skl_tplg_fe_get_cpr_module() can be NULL. So check for the valid pointer before dereferencing. Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-08ASoC: Intel: Skylake: Add channel map in updown mixer module IPCGuneshwor Singh2-0/+2
DSP expects channel map to be sent in the IPC for updown mixer module. So add ch_map info in updown mixer module config. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-18 03:22:20 +0300