summaryrefslogtreecommitdiff
path: root/sound/soc/intel/skylake/skl-messages.c
AgeCommit message (Collapse)AuthorFilesLines
2017-03-15ASoC: Intel: Skylake: Fix to delete DSP pipe after stopping pipeJeeja KP1-1/+1
DSP pipe needs to stopped before deleting the pipe. Currently check is for pipe state > STARTED, which is incorrect. So changed to include pipe state STARTED to stop the pipe if it started. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-16ASoC: Intel: Skylake: Add Geminlake IDsVinod Koul1-0/+7
Geminilake is next gen SoC, so add the IDs for Geminilake. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25ASoC: Intel: Skylake: Don't use dma I2S config structure in kernelGuruprasadX Pawse1-6/+3
I2S blob config structure can change between DSP copier module versions. We are not modifying these structures anyway and NHLT blobs specify them properly, so use the blob directly to send the dma_control ipc instead of using the predefined I2S blob config structure. Signed-off-by: GuruprasadX Pawse <guruprasadx.pawse@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-09ASoC: Intel: Skylake: Flush pending D0i3 request on suspendJayachandran B1-0/+27
While going to suspend, if we have any pending D0i3 work scheduled, flush that and force the DSP to goto D0i3 mode before going to suspend. Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-03ASoC: Intel: Skylake: Add support for LPModeVinod Koul1-1/+2
For D0i3, we need to tell DSP to run the pipelines in LP mode. This information is kept in topology and passed to driver as an attribute for pipe. So add a new tuple for lpmode and program the pipe based on value set. Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-24ASoC: Intel: Skylake: Update to use instance ids generatedDharageswari R1-0/+2
Post bind parameters of KPB module contains the instance id's of neighbouring modules in the sink path Now that module instance ids are generated dynamically we need to update these parameters as well, so use the table created and update the ids Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-24ASoC: Intel: Skylake: Use private instance id of modules in IPCDharageswari R1-10/+12
Use private id's of module instances that are generated during init_module for the IPC messages to DSP. These id's are freed up during delete pipeline. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-09Merge branch 'topic/hda-link-time' of ↵Mark Brown1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-intel
2016-08-09ALSA: convert users to core bus_parse_capabilitiesVinod Koul1-2/+2
Now that we have the bus parse capabilities moved to core, we need to convert users. The SKL driver and HDA extended lib needs to converted in single patch, otherwise we regress on the functionality. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-08ASoC: Intel: Skylake: Add module processing domain supportSenthilnathan Veppur1-0/+1
A module can be scheduled in deferent processing domains in DSP. Topology specifies the module domain. Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: Intel: Skylake: split fw and dsp initializationVinod Koul1-1/+7
The DSP instance creation also loads the firmware on DSPs. For library load the firmware names come from topology so can't be loaded at object creation. So split the firmware load and object creation. FW load is now called after topology init in platform probe. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: Intel: Skylake: modify skl_get_dsp_ops()Vinod Koul1-14/+16
To query the ops used for a platform, we use skl_get_dsp_ops() which return index and then we load the ops. Rather than this return the ops, this way it cna be used later to query the ops in rest of the driver. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-12ASoC: Intel: add kablake device IDsVinod Koul1-0/+6
Kabylake is next generation Intel platform which has similar audio controller to Skylake, so add the ID and driver data in SKL driver. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-27ASoC: Intel: Skylake: Increase loglevel of debug messages.Vedang Patel1-1/+1
There is log spam while doing playback, record or reloading the audio firmware. print_hex_dump uses printk(KERN_DEBUG,... which is different from dev_dbg used elsewhere in the driver: it's always enabled at compile-time. Change it to print_hex_dump_debug for logging consistency. For consistency with other log statements, change dev_info to dev_dbg for a kernel print which is frequently printed by the driver. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07ASoC: Intel: Skylake: Don't pause stopped pipeline while deletingDharageswari R1-9/+11
If pipeline is not STARTED, we do not need to pause pipeline while deleting. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07ASoC: Intel: Skylake: Set the pipe state to paused when pausedJeeja KP1-1/+1
When pipe is stopped/Paused, set the pipe state to paused instead of created. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07ASoC: Intel: Skylake: Reset DSP pipe when host/link DMA is resetJeeja KP1-0/+23
In case of XRUN recovery PCM prepare will be called. In this case Host/Link DMAs are reset and reconfigured, hence the corresponding FE/BE pipe needs to be reset in order to get to a clean state. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-02ASoC: Intel: Skylake: Fix memory leak during init instanceMousumi Jana1-1/+1
param_data variable is allocated during set module format of init instance is not getting freed and hence can cause a memory leak. So free it up. Signed-off-by: Mousumi Jana <mousumix.jana@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-31ASoC: Intel: Bxtn: Add Broxton DSP supportJeeja KP1-0/+120
Broxton DSP is mostly similar to Skylake one but with subtle differences like no Code Load DMA and uses HDA DMA for code loading, DSP D0 and D3 sequences are different. These changes are comprehended by adding different DSP power up and down handlers, and new loader ops and also adding prepare and trigger which HDA DSP DMA requires Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: GuruprasadX Pawse <guruprasadx.pawse@intel.com> Signed-off-by: Kranthi G <gudishax.kranthikumar@intel.com> Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Ramesh Babu <ramesh.babu@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12ASoC: Intel: Skylake: Move Skylake dsp ops & loader opsJeeja KP1-9/+53
The code loading for Skylake and other platforms is different, so add a dsp_ops and a loader_ops which can be defined for each platform. Move the dsp init, cleanup and loader ops (alloc and free dma) to these ops Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-08ASoC: Intel: Skylake: Add MCLK configurationDharageswari.R1-0/+40
The SoC has MCLK output which is typically required by codecs. The MCLK is controlled by DSP FW, so driver can configure that by sending DMA_CONTROL IPC. The configuration for MCLK is present in the endpoint blob. So if block has this configuration, send IPC to DSP for MCLK configuration. This is done by new function skl_dsp_set_dma_control() which is invoked by BE prepare. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-08ASoC: Intel: Skylake: Get node id using helperDharageswari.R1-6/+16
skl_setup_cpr_gateway_cfg() retrieves gateway settings which are required for copier module configuration. For upcoming DMA control IPC we need similar retrieval, so separate this piece into skl_get_node_id() helper which will be common for these functions Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04ASoC: Intel: Skylake: Fix the module state check conditionJeeja KP1-1/+1
For binding modules we should check if source or destination module is in UNINT state. We canot bind even if one of them is in this state. So update the check from logical AND to logical OR and do not bind modules for this case Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04ASoC: Intel: Skylake: Fix return of skl_get_queue_indexJeeja KP1-2/+2
In unbind modules, the skl_get_queue_index() can return error if the pin is dynamic and module is not bound yet. So instead of returning error this check should return success as modules is not yet bound. This will let the module be bound when connected pipes are enabled and will bind this as well. So change the return value to 0 Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: Intel: Skylake: Fix to set pipe state to invalid when deletingJeeja KP1-0/+2
When pipeline is deleted, set the pipeline state to invalid state. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: Intel: Skylake: read params from DSP if module is onOmair M Abdullah1-0/+13
If a module is ON then we should read the module parameters from DSP rather than driver cached values Signed-off-by: Omair M Abdullah <omair.m.abdullah@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: Intel: Skylake: Add support for Mic Select moduleDharageswari R1-0/+26
Mic select is a DSP module which is used to select one or many inputs to form an output. This is useful to select data selectively from PDM input and hence the name. This module is of generic module type. This patch adds support to add and configure Mic select module in firmware topology. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: Intel: Skylake: Add memory pages to widget data.Jeeja KP1-0/+1
A module can require extra memory for processing, like audio algorithms. The memory for these modules needs to be represented in base module configuration and passed to DSP on init, so add the memory pages as a field in widget data Signed-off-by: Dharageswari.R <dharageswari.r@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-02ASoC: Intel: Skylake: Add helper routine to handle Algo parameterJeeja KP1-0/+31
Some DSP modules has user configurable parameters, which are required by some modules at module initialization. To configure the module algorithm parameter during initialization we add helpers here Signed-off-by: Divya Prakash <divya1.prakash@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-02ASoC: Intel: Skylake: Add helper routines to handle module paramsJeeja KP1-1/+15
Some DSP modules have user configurable parameters. These parameters are required by modules in the following scenario - during initialization - after initialization using set parameter This patch adds helper routine to set module parameters using large config set IPC message and removes params to be passed as init module routine. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-16ASoC: Intel: Skylake: Use the fw name from ACPI mach tableVinod Koul1-1/+1
The firmware name is hard coded which doesnt allow to load different platforms for various platforms so get this name from available machine table and pass it to dsp context for loading Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-16ASoC: Intel: Skylake: Fix to remove channel_map calculationJeeja KP1-93/+5
Widget FW topology private data already has the information on the channel map, ch_cfg and interleaving. This patch removes the calculation of channel_map in driver and reads the value directly from widget private data. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-16ASoC: Intel: Skylake: Add multiple pin formatsHardik T Shah1-4/+4
The module pin formats are considered homogeneous, but some modules can have different pcm formats on different pins, like reference signal for a module. This patch add support for configuration of each pin of module and allows us to specify if pins and homogeneous or heterogeneous Signed-off-by: Hardik T Shah <hardik.t.shah@intel.com> Signed-off-by: Omair M Abdullah <omair.m.abdullah@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-16ASoC: Intel: Skylake: Fix support for multiple pins in a moduleJeeja KP1-28/+55
For supporting multiple dynamic pins, module state check is incorrect. In case of unbind, module state need to be changed to uninit if all pins in the module is is unbind state. To handle module state correctly add pin state and use pin state check to set module state correctly. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23ASoC: Intel: Skylake: Fix to set Non gateway copier cfgJeeja KP1-1/+7
If copier instance is connected to a DMA gateway then driver needs to configure the gateway configuration otherwise set it to invalid. This patch sets the non gateway copier node value to invalid. Signed-off-by: Dharageswari.R <dharageswari.r@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23ASoC: Intel: Skylake: Fix to check return value of dsp initJeeja KP1-0/+3
If DSP initialization fails, ipc to disable notification will cause NULL ptr exception as ipc is not initialized. This patch returns error if dsp init fails before sending disable notification ipc. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23ASoC: Intel: Skylake: Add support to disable module notificationsJeeja KP1-2/+26
Each FW modules can report underrun/overrun notification from all modules. This patch disables underrun/overrun notification after firmware is loaded. This will be supportted for debug mode only thru debugfs Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23ASoC: Intel: Skylake: Update for ssp node index in copier cfgJeeja KP1-3/+4
DSP firmware has interface change for SSP node index structure. New FW interface removes the dual_mono field and adds 4 bits for TDM slot group index. This patch updates the ssp dma to align with the DSP firmware structure. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-07ASoC: Intel: Skylake: Add pipe management helpersJeeja KP1-0/+126
To manage DSP we need to create processing pipeline and on cleanup destroy them. So we add create and destroy routines for pipelines The pipelines need to to be executed so we add pipeline run and stop routines All these send required IPCs to DSP using IPC routines added earlier Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-07ASoC: Intel: Skylake: Add DSP module init and binding routinesJeeja KP1-0/+183
A module needs to be instantiated and then connected with other modules. On cleanup we need to disconnect the module. This is achieved by helpers module init, bind and unbind which are added here Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-07ASoC: Intel: Skylake: Add helpers for SRC and converter modulesHardik T Shah1-4/+60
SRC and converter modules are required to do frequency and channel conversion in DSP. Both take base module configuration and additional SRC and converter parameters. The helpers here are added to calculate the values for these modules Signed-off-by: Hardik T Shah <hardik.t.shah@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-07ASoC: Intel: Skylake: Add helpers for DSP module configurationJeeja KP1-0/+386
This adds helper functions to calculate parameters required for base module format and copier module. A generic module is modelled by base module. Copier module is responsible for getting/sending data to FE (host DMAs) and BE (link HDA DMA, SSP, PDM) This also ads module pin management helpers which help in finding pins to use or freeing them up Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-23ASoC: Intel: Skylake: Add dsp and ipc init helpersJeeja KP1-0/+133
This helper function will be used by the Skylake driver for dsp and ipc initialization if processing pipe capability is supported. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-24 20:50:38 +0300