summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/twl6040.c
AgeCommit message (Collapse)AuthorFilesLines
2011-09-27ASoC: twl6040: No need to change delay during HS rampPeter Ujfalusi1-10/+2
The Headset gain have 2dB steps all the way, so there is no reason to have different delays as we approaching to the end of the scale. The comment was also wrong, since we have 0dB at 0x0 raw at one end of the range, and not in the middle. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: twl6040: Move the delayed_work for HS detection under twl6040_jack_dataPeter Ujfalusi1-4/+4
The delayed_work named 'delayed_work' is for the headset detection, so move it to the twl6040_jack_data struct. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: twl6040: Move delayed_work struct inside twl6040_output for HS/HFPeter Ujfalusi1-8/+7
The delayed works for the output can be moved within the twl6040_output struct (from the twl6040_data) to be better organized. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: twl6040: Combine the custom volsw get, and put functionsPeter Ujfalusi1-64/+17
We can manage with one set of get, and put function for the gain controls we need to handle with custom code due to the shadowing of the register. For both get, and put function we can call decide based on the mc->rreg value, if we need to call the volsw, or the vlosw_2r variant (in 2r case rreg is not 0). Handling of the shadow values are the same for both type of controls. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: twl6040: Rename pga_event to out_drv_eventPeter Ujfalusi1-6/+5
This event handler is used with the OUT_DRV widgets. The name pga_event was misleading. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: twl6040: Function to fetch the TRIM valuesPeter Ujfalusi1-0/+9
Provide API to fetch the TRIM values (for machine drivers) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: twl6040: Read the TRIM values from the chipPeter Ujfalusi1-0/+7
Update the reg_cache with values from chip regarding to TRIM. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-23ASoC: twl6040: No need to read the INTID registerPeter Ujfalusi1-7/+2
Since our irq handler has been called, it is granted, that the reason was either PLUGINT, or UNPLUGINT. The INTID register has been checked in the MFD part of twl6040 driver (twl6040-irq.c). We have no reason to read from chip again here. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC/MFD: twl6040: Combine bit definitions for Headset control registersPeter Ujfalusi1-1/+1
Use one set of defines for the HS bits, since they are identical in both control register. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC: twl6040/sdp4430: Change legacy DAI namePeter Ujfalusi1-1/+1
Change the legacy DAI name from "twl6040-hifi" to "twl6040-legacy" to be more intuitive. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC: twl6040: Support for AUX L/R outputPeter Ujfalusi1-0/+18
AUX L/R outputs can be driver from the Handsfree PGA output. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC: twl6040: Use consistent names for Headset pathPeter Ujfalusi1-12/+12
Use "Headset XYZ" for user visible controls, while the internal DAPM widgets can use "HS XYZ". In this way we can group the Headset related controls in UI (alsamixer for example). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC: twl6040: Use consistent names for Handsfree pathPeter Ujfalusi1-16/+16
Use "Handsfree XYZ" for user visible controls, while the internal DAPM widgets can use "HF XYZ". In this way we can group the Handsfree related controls in UI (alsamixer for example). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC: twl6040: Earphone path correctionPeter Ujfalusi1-5/+12
Fix the DAPM routing for the earphone path. Convert the DAPM_SWITCH_E to DAPM_OUT_DRV_E, so we can have correct power up, and down sequence for EP. Introduce mute control (Earphone Playback Switch) for users to enable/disable the EP path. Note: the EP does not have it's own dedicated DAC. EP is connected to HSL DAC. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC: twl6040: Introduce SW only shadow registerPeter Ujfalusi1-3/+16
Software only shadow register to be used by the driver. For example Earpiece path will need this shadow register. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC: twl6040: Remove strings "NULL" from DAPM routePeter Ujfalusi1-4/+4
Replace the string with plain NULL. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC: twl6040: Fix comments for register namesPeter Ujfalusi1-47/+47
Change the register name strings in the comments for the twl6040_reg table, so it is easier to search for specific register. This is cosmetic change. Before we had for example: TWL6040_REG_HSLCTL as register definition. At the register table we had: TWL6040_HSLCTL Searching for TWL6040_HSLCTL resulted no hits. While if we look for REG_HSLCTL, we can find the places the register has been used. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC: twl6040: Lower the power on gain values at startupPeter Ujfalusi1-0/+11
The default gains on outputs/inputs are set to 0dB. This is fixing the pop noise issue at the first playback, which caused by the wrong starting point of the ramp code. The ramp code for the outputs expects the gains to be in their lowest configuration in order to be effective. After the playback stops, the ramp code takes care of ramping down the gains to their minimum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-20ASoC: twl6040: Correct supported number of playback channelsPeter Ujfalusi1-1/+1
twl6040 supports 5 playback, and 2 capture channels Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-20ASoC: twl6040: Fix the number of channels for vibraPeter Ujfalusi1-2/+2
Only mono audio can be used for vibra (DL4 channel). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-20ASoC: twl6040: Use chip defaults in the initial reg_cachePeter Ujfalusi1-2/+6
Reset the twl6040_reg array to hold the chip default values. The only changed values were for the microphone input selection. Select no input for the microphones in the twl6040_init_chip function. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-20ASoC: twl6040: Chip initialization cleanupPeter Ujfalusi1-87/+13
There is no need to write to the vio registers at probe time, since most them either read only, or shared with MFD or not used. On the other hand it is a good idea to updated the ASICREV register in the cache at this time. After power up we need to restore some registers. Clean up the list to contain only the registers we are going to restore. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-27Merge branch 'next/devel2' of ↵Linus Torvalds1-405/+328
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/devel2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (47 commits) OMAP: Add debugfs node to show the summary of all clocks OMAP2+: hwmod: Follow the recommended PRCM module enable sequence OMAP2+: clock: allow per-SoC clock init code to prevent clockdomain calls from clock code OMAP2+: clockdomain: Add per clkdm lock to prevent concurrent state programming OMAP2+: PM: idle clkdms only if already in idle OMAP2+: clockdomain: add clkdm_in_hwsup() OMAP2+: clockdomain: Add 2 APIs to control clockdomain from hwmod framework OMAP: clockdomain: Remove redundant call to pwrdm_wait_transition() OMAP4: hwmod: Introduce the module control in hwmod control OMAP4: cm: Add two new APIs for modulemode control OMAP4: hwmod data: Add modulemode entry in omap_hwmod structure OMAP4: hwmod data: Add PRM context register offset OMAP4: prm: Remove deprecated functions OMAP4: prm: Replace warm reset API with the offset based version OMAP4: hwmod: Replace RSTCTRL absolute address with offset macros OMAP: hwmod: Wait the idle status to be disabled OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros OMAP2+: hwmod: Init clkdm field at boot time OMAP4: hwmod data: Add clock domain attribute OMAP4: clock data: Add missing divider selection for auxclks ...
2011-07-07ASoC: twl6040: Add back support for legacy modePeter Ujfalusi1-0/+18
The legacy mode has been accidentaly removed by commit: ASoC: twl6040: add all ABE DAIs Add back the twl6040-hifi dai. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-07ASoC: twl6040: No need to convert the PLL IDPeter Ujfalusi1-4/+1
Since the PLL handling has been simplified, and rebased on 0, there is no longer need for converting the PLL ID. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-07ASoC: twl6040: Configure PLL only oncePeter Ujfalusi1-45/+27
Avoid configuring the PLL several times during audio startup. We can configure the PLL at prepare time with parameters collected earlier hw_param, and set_dai_sysclk calls. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-07ASoC: twl6040: Simplify sample rate constraint handlingPeter Ujfalusi1-15/+4
We can manage the sample rate constraints without the need to maintain a variable and a pointer. This simplifies the handling of the constraint, and makes it more robust. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-07ASoC: twl6040: Move PLL selection to codec driverPeter Ujfalusi1-37/+73
It is better if the selection between the Low power, and High performance PLL is handled within the codec driver, not in machine driver(s) to avoid duplicated code, and also to have consistent tracking of the selected PLL, and the resulting differences in supported sample rates. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-07ASoC: twl6040: Use neutral name for power mode text/enumPeter Ujfalusi1-5/+5
Change the variable names to be neutral (not refering to HS). This will ease up the introduction of PLL selection, which going to use the same enum strings. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-07ASoC: twl6040: Do not use wrapper for irq requestPeter Ujfalusi1-5/+14
The twl6040_request_irq/free_irq inline functions are going to be removed, so replace them with direct calls. The irq number is provided by the core driver via resource. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04ASoC: twl6040: Configure ramp step based on platformAxel Castaneda Gonzalez1-20/+71
Enable ramp down/up step to be configured based on platform. Signed-off-by: Axel Castaneda Gonzalez <x0055901@ti.com> Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04ASoC: twl6040: set default constraints.Liam Girdwood1-0/+1
Set default sysclk constraints to high performance mode. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04ASoC: twl6040: Remove pll and headset mode dependencyMisael Lopez Cruz1-5/+57
Remove dependency between pll (hppll, lppll) and headset power mode (low-power, high-performance), as headset power mode can be used with any pll. A new control is created to allow headset power mode configuration from userspace. Changing headset power mode during earpiece related usecases is not propagated down to the codec as earpiece requires HS DAC in HP mode. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04ASoC: twl6040: Support other sample rates in constraints.Liam Girdwood1-0/+11
Add other supported sample rates to LP and HP modes. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04ASoC: twl6040: add all ABE DAIsLiam Girdwood1-8/+36
Add all DAIs to fully support OMAP4 ABE. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04ASoC: twl6040: Convert into TWL6040 MFD childMisael Lopez Cruz1-338/+87
Convert TWL6040 CODEC driver into a TWL6040 MFD child, it implies that MFD-level operations like register accesses, clock setting and power management are done through MFD APIs, not directly by CODEC driver anymore. To avoid conflicts with the other MFD child, vibrator registers are skipped in CODEC driver. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04MFD: twl4030-audio: Rename platform dataPeter Ujfalusi1-1/+1
Allign the platform data names for twl4030 audio submodule: twl4030_audio_data: for the core MFD driver twl4030_codec_data: for ASoC codec driver twl4030_vibra_data: for the input/ForceFeedback driver To avoid breakage, change all depending drivers, files to use the new types. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-06-08ASoC: twl6040 - According to TWL6040 specification, gain start at 6dB and ↵Ricardo Neri1-2/+2
not -6dB. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2011-05-13ASoC: twl6040 - fix LINEGAIN volume controlLiam Girdwood1-3/+3
Fix the TWL6040 LINEGAIN volume control to match the TRM. Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2011-03-26ASoC: twl6040: Return -ENOMEM if create_singlethread_workqueue failsAxel Lin1-1/+3
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-21ASoC: Staticise twl6040_hs_jack_report()Mark Brown1-2/+2
It's an internal function so shouldn't be exported (as sparse points out). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-23ASoC: twl6040: Convert HF and HS drivers to use DAPM OUT_DRV widgetOlaya, Margarita1-4/+4
Make the phoenix HS and HF drivers use the new DAPM driver widget in order to guarantee power ON/OFF order sequence. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-16ASoC: twl6040: Add ramp up/down volume for HS and HFMargarita Olaya Cabrera1-12/+521
Add ramp functions for the headset and handsfree outputs in order to reduce the pops during power on/off sequences. In order to give more control to volume ramp, step size and delay between steps can be specified. The patches are based on wm8350 implementation from Liam Girdwood. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-16ASoC: twl6040: Set default gains to minimun valueOlaya, Margarita1-0/+9
Updated default values to improve power consumption. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Use correct offset for LineInAmp RightMisael Lopez Cruz1-1/+1
Gain for LineInAmp Right uses LINEGAIN[5:3], which means that offset for right channel should be 4. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Fix TLV dB step values for gainsOlaya, Margarita1-2/+2
Some gains were incorrectly configured for dB values. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Increase timeout for power upJorge Eduardo Candelaria1-1/+1
After coming back from suspend, the timeout waiting for Phoenix chip to complete its power up sequence is not enough, which leaves the codec cache value for some registers in an outdated state. Increase the timeout value to wait for the power up sequence to correclty complete. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Enable plug detection interruptsMisael Lopez Cruz1-7/+3
Enable plug detection interrupt mask in order to get headset PLUGINT/UNPLUGINT interrupts. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Clear interrupt status at boot timeJorge Eduardo Candelaria1-10/+11
On Phoenix 1.1, the INTID register default value is an invalid one, causing the interrupt handler to think the phoenix power on sequence is ready before it actually finishes. This causes some i2c errors when trying to configure twl. Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: twl6040: Enable automatic power for phoenix 1.1Olaya, Margarita1-4/+9
Phoenix 1.1 supports automatic power on sequence, a verification is added to use it with new revision of the chip. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 05:52:57 +0300