| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There've been quite a few regression reports about the lowered volume
(reduced to ca 65% from the previous level) on Lenovo Thinkpad X1
after the commit d2cd795c4ece ("ALSA: hda - fixup for the bass speaker
on Lenovo Carbon X1 7th gen"). Although the commit itself does the
right thing from HD-audio POV in order to have a volume control for
bass speakers, it seems that the machine has some secret recipe under
the hood.
Through experiments, Benjamin Poirier found out that the following
routing gives the best result:
* DAC1 (NID 0x02) -> Speaker pin (NID 0x14)
* DAC2 (NID 0x03) -> Shared by both Bass Speaker pin (NID 0x17) &
Headphone pin (0x21)
* DAC3 (NID 0x06) -> Unused
DAC1 seems to have some equalizer internally applied, and you'd get
again the output in a bad quality if you connect this to the
headphone pin. Hence the headphone is connected to DAC2, which is now
shared with the bass speaker pin. DAC3 has no volume amp, hence it's
not connected at all.
For achieving the routing above, this patch introduced a couple of
workarounds:
* The connection list of bass speaker pin (NID 0x17) is reduced not to
include DAC3 (NID 0x06)
* Pass preferred_pairs array to specify the fixed connection
Here, both workarounds are needed because the generic parser prefers
the individual DAC assignment over others.
When the routing above is applied, the generic parser creates the two
volume controls "Front" and "Bass Speaker". Since we have only two
DACs for three output pins, those are not fully controlling each
output individually, and it would confuse PulseAudio. For avoiding
the pitfall, in this patch, we rename those volume controls to some
unique ones ("DAC1" and "DAC2"). Then PulseAudio ignore them and
concentrate only on the still good-working "Master" volume control.
If a user still wants to control each DAC volume, they can still
change manually via "DAC1" and "DAC2" volume controls.
Fixes: d2cd795c4ece ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen")
Reported-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207407#c10
BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3214171
BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3276276
Link: https://lore/kernel.org/r/20200829112746.3118-1-benjamin.poirier@gmail.com
Link: https://lore.kernel.org/r/20200903083300.6333-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
On SKL+ Intel platforms, the driver selection is handled by the
snd_intel_dspcfg, and when the HDaudio legacy driver is not selected,
be it with the auto-selection or user preferences with a kernel
parameter, the probe aborts with no logs, only a -ENODEV return value.
Having no dmesg trace, even with dynamic debug enabled, makes support
more complicated than it needs to be, and even experienced users can
be fooled. A simple dev_dbg() trace solves this problem.
BugLink: https://github.com/thesofproject/linux/issues/2330
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902154239.1440537-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add Rocketlake HDMI codec support. Rocketlake shares
the pin-to-port mapping table with Tigerlake.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902154207.1440393-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull tasklet API conversions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200902040221.354941-6-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200902040221.354941-5-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200902040221.354941-4-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Following Christian Lachner's patch for Gigabyte X570-based motherboards,
also patch the MSI X570-A PRO motherboard; the ALC1220 codec requires the
same workaround for Clevo laptops to enforce the DAC/mixer connection
path. Set up a quirk entry for that.
I suspect most if all X570 motherboards will require similar patches.
[ The entries reordered in the SSID order -- tiwai ]
Related buglink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
Signed-off-by: Dan Crawford <dnlcrwfrd@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200829024946.5691-1-dnlcrwfrd@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When system is suspended with active audio playback to HDMI/DP, two
alternative sequences can happen at resume:
a) monitor is detected first and ALSA prepare follows normal
stream setup sequence, or
b) ALSA prepare is called first, but monitor is not yet detected,
so PCM is restarted without a pin,
In case of (b), on i915 systems, haswell_verify_D0() is not called at
resume and the pin power state may be incorrect. Result is lack of audio
after resume with no error reported back to user-space.
Fix the problem by always verifying converter and pin state in the
i915_pin_cvt_fixup().
BugLink: https://github.com/thesofproject/linux/issues/2388
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200826170306.701566-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Galaxy Book Ion NT950XCJ-X716A (15 inches) uses the same ALC298
codec as other Samsung laptops which have the no headphone sound bug. I
confirmed on my own hardware that this fixes the bug.
This also correct the model name for the 13 inches version. It was
incorrectly referenced as NT950XCJ-X716A in commit e17f02d05. But it
should have been NP930XCJ-K01US.
Fixes: e17f02d0559c ("ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423
Signed-off-by: Adrien Crivelli <adrien.crivelli@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200826084014.211217-1-adrien.crivelli@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This reverts commit 61eee4a7fc40 ("ALSA: hda: Add support for Loongson
7A1000 controller") to fix the following error on the Loongson LS7A
platform:
rcu: INFO: rcu_preempt self-detected stall on CPU
<SNIP>
NMI backtrace for cpu 0
CPU: 0 PID: 68 Comm: kworker/0:2 Not tainted 5.8.0+ #3
Hardware name: , BIOS
Workqueue: events azx_probe_work [snd_hda_intel]
<SNIP>
Call Trace:
[<ffffffff80211a64>] show_stack+0x9c/0x130
[<ffffffff8065a740>] dump_stack+0xb0/0xf0
[<ffffffff80665774>] nmi_cpu_backtrace+0x134/0x140
[<ffffffff80665910>] nmi_trigger_cpumask_backtrace+0x190/0x200
[<ffffffff802b1abc>] rcu_dump_cpu_stacks+0x12c/0x190
[<ffffffff802b08cc>] rcu_sched_clock_irq+0xa2c/0xfc8
[<ffffffff802b91d4>] update_process_times+0x2c/0xb8
[<ffffffff802cad80>] tick_sched_timer+0x40/0xb8
[<ffffffff802ba5f0>] __hrtimer_run_queues+0x118/0x1d0
[<ffffffff802bab74>] hrtimer_interrupt+0x12c/0x2d8
[<ffffffff8021547c>] c0_compare_interrupt+0x74/0xa0
[<ffffffff80296bd0>] __handle_irq_event_percpu+0xa8/0x198
[<ffffffff80296cf0>] handle_irq_event_percpu+0x30/0x90
[<ffffffff8029d958>] handle_percpu_irq+0x88/0xb8
[<ffffffff80296124>] generic_handle_irq+0x44/0x60
[<ffffffff80b3cfd0>] do_IRQ+0x18/0x28
[<ffffffff8067ace4>] plat_irq_dispatch+0x64/0x100
[<ffffffff80209a20>] handle_int+0x140/0x14c
[<ffffffff802402e8>] irq_exit+0xf8/0x100
Because AZX_DRIVER_GENERIC can not work well for Loongson LS7A HDA
controller, it needs some workarounds which are not merged into the
upstream kernel at this time, so it should revert this patch now.
Fixes: 61eee4a7fc40 ("ALSA: hda: Add support for Loongson 7A1000 controller")
Cc: <stable@vger.kernel.org> # 5.9-rc1+
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1598348388-2518-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The WAKEEN bits are used to indicate which bits in the
STATESTS register may cause wake event during the codec
state change request. Configure the WAKEEN register for
the Tegra to detect the wake events.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20200825052415.20626-3-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Tegra HDA codec HW implementation has an issue related to not
swapping the 2 channel Audio Sample Packet(ASP) channel mapping.
Whatever the FL and FR mapping specified the left channel always
comes out of left speaker and right channel on right speaker. So
add condition to disallow the swapping of FL,FR during the playback.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20200825052415.20626-2-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_ca0106_spi_write() returns 1 on error, snd_ca0106_pcm_power_dac()
is returning the error code directly, and the caller is expecting an
negative error code
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200824224541.1260307-1-ztong0001@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Galaxy Book Ion uses the same ALC298 codec as other Samsung laptops
which have the no headphone sound bug, like my Samsung Notebook. The
Galaxy Book owner confirmed that this patch fixes the bug.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423
Signed-off-by: Mike Pozulp <pozulp.kernel@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200818165446.499821-1-pozulp.kernel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The very quiet and distorted headphone output bug that afflicted my
Samsung Notebook 9 is appearing in many other Samsung laptops. Expose
the quirk which fixed my laptop as a model so other users can try it.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423
Signed-off-by: Mike Pozulp <pozulp.kernel@gmail.com>
Link: https://lore.kernel.org/r/20200817043219.458889-1-pozulp.kernel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Flex Book uses the same ALC298 codec as other Samsung laptops which
have the no headphone sound bug, like my Samsung Notebook. The Flex Book
owner used Early Patching to confirm that this quirk fixes the bug.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423
Signed-off-by: Mike Pozulp <pozulp.kernel@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200814045346.645367-1-pozulp.kernel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Freeing chip on error may lead to an Oops at the next time
the system goes to resume. Fix this by removing all
snd_echo_free() calls on error.
Fixes: 47b5d028fdce8 ("ALSA: Echoaudio - Add suspend support #2")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20200813074632.17022-1-dinghao.liu@zju.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There's another HP desktop has buggy BIOS which flags the Port
Connectivity bit as no connection.
Apply force connectivity quirk to enable DP/HDMI audio.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200811095336.32396-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The previous fix forgot to remove the unused variable that triggers a
compile warning now:
sound/pci/hda/patch_realtek.c: In function 'alc285_fixup_hp_gpio_led':
sound/pci/hda/patch_realtek.c:4163:19: warning: unused variable 'spec' [-Wunused-variable]
Fix it.
Fixes: 404690649e6a ("ALSA: hda - reverse the setting value in the micmute_led_set")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20200812070256.32145-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Before the micmute_led_set() is introduced, the function of
alc_gpio_micmute_update() will set the gpio value with the
!micmute_led.led_value, and the machines have the correct micmute led
status. After the micmute_led_set() is introduced, it sets the gpio
value with !!micmute_led.led_value, so the led status is not correct
anymore, we need to set micmute_led_polarity = 1 to workaround it.
Now we fix the micmute_led_set() and remove micmute_led_polarity = 1.
Fixes: 87dc36482cab ("ALSA: hda/realtek - Add LED class support for micmute LED")
Reported-and-suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200811122430.6546-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The dsp_registers field of struct echoaduio has the volatile modifier,
but it's basically superfluous; the field is accessed only for the
base pointer of readl() and writel(), hence marking with __iomem alone
should suffice. OTOH, having the volatile prefix causes a compile
warning like:
sound/pci/echoaudio/echoaudio.c:1878:14: warning: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type [-Wdiscarded-qualifiers]
So it's better to drop this superfluous modifier.
Link: https://lore.kernel.org/r/20200803143958.24324-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
After installing the Ubuntu Linux, the micmute led status is not
correct. Users expect that the led is on if the capture is disabled,
but with the current kernel, the led is off with the capture disabled.
We tried the old linux kernel like linux-4.15, there is no this issue.
It looks like we introduced this issue when switching to the led_cdev.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200810021659.7429-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The jack on Intel NUC 8 Rugged rear panel doesn't work.
The spec [1] states that the jack supports both headphone and
microphone, so override a Pin Complex which has both Amp-In and Amp-Out
to make the jack work.
Node 0x1b fits the requirement, and user confirmed the jack now works
with new pin config.
[1] https://www.intel.com/content/dam/support/us/en/documents/mini-pcs/NUC8CCH_TechProdSpec.pdf
BugLink: https://bugs.launchpad.net/bugs/1875199
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200807080514.15293-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Drop duplicated words in sound/pci/.
{and, the, at}
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20200806021926.32418-1-rdunlap@infradead.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Tegra HDA has audio data buffer for upto tens of frames, this buffer
can help to avoid underflow. HW will keep issuing new data fetch
request when buffers are not full and current BDL is not done. When SW
disable DMA RUN bit for a stream, HW can't cancel the already issued data
fetch request and hence it can't stop DMA. HW has to wait for all issued
data fetch request get data returned before it stops DMA.
This HW behavior is not in sync with HDA spec which says DMA RUN bit
should be cleared within 1 audio frame. For Tegra, DMA RUN bit was
active for more than one audio frame, due to this the timeout in
snd_hdac_stream_sync function is not helping. When Stream reset set
and clear happens during DMA RUN bit active state it results in Memory
Decode error.
Unfortunately, there is no way to detect when these data accesses have
completed, but testing has shown that a 100us delay between Stream reset
set and clear operation for Tegra avoids the memory decode error.
Therefore, adding a 100us dma stop delay.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20200805095221.5476-4-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Set chip->align_buffer_size to 1 for Tegra platforms to make the buffer
alignment to be multiple of 128 bytes. This fix is applied as gstreamer
alsasink gets stuck with the default buffer-time and latency-time
parameters with 4 byte buffer alignment.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20200805095221.5476-2-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
HDMI on some platforms doesn't enable audio support because its Port
Connectivity [31:30] is set to AC_JACK_PORT_NONE:
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x58560010: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 3
0x02 0x03* 0x04
For now, use a quirk to force connectivity based on SSID. If there are
more platforms affected by the same issue, we can eye for a more generic
solution.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200804155836.16252-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.9
The biggest changes here one again come from Mormioto-san who has
continued his dilligent work cleaning up long standing issues in the
APIs, it's particularly nice to see the transition from digital_mute()
to mute_stream() finally completed. There's also been a lot of work on
the x86 code again, this time a big focus has been on cleaning up some
issues identified by various static tests, and on the Freescale systems.
Otherwise the biggest thing has been a lot of driver additions:
- Convert users of digital_mute() to mute_stream().
- Simplify I/O helper functions.
- Add a helper for getting the RTD from a substream.
- Many, many fixes and cleanups to the x86 code.
- New drivers for Freescale MQS and i.MX6sx, Intel KeemBay I2S, Maxim
MAX98360A and MAX98373 Soundwire, several Mediatek boards, nVidia
Tegra 186 and 210, RealTek RL6231, Samsung Midas and Aries boards (some
of the first phones I worked on!) and TI J721e EVM.
|
|
This reverts commit 9a6418487b56 ("ALSA: hda: call runtime_allow()
for all hda controllers").
The reverted patch already introduced some regressions on some
machines:
- on gemini-lake machines, the error of "azx_get_response timeout"
happens in the hda driver.
- on the machines with alc662 codec, the audio jack detection doesn't
work anymore.
Fixes: 9a6418487b56 ("ALSA: hda: call runtime_allow() for all hda controllers")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208511
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200803064638.6139-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The ca0113 command had the wrong group_id, 0x48 when it should've been
0x30. The front microphone selection should now work.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200803002928.8638-3-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add a new quirk ID for the Recon3D, as tested by me.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200803002928.8638-2-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When the ZxR headphone gain control was added, the ca0132_switch_get
function was not updated, which meant that the changes to the control
state were not saved when entering/exiting alsamixer.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200803002928.8638-1-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
There are several Loongson-3 based laptops produced by CZC or Lemote,
they use alc269/alc662 codecs and need specific pin-tables, this patch
add their pin-tables.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1596360400-32425-1-git-send-email-chenhc@lemote.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
HP NB right speaker had no sound output.
This platform was connected to I2S Amp for speaker out.(None Realtek I2S Amp IC)
EC need to check codec GPIO1 pin to initial I2S Amp.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/01285f623ac7447187482fb4a8ecaa7c@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When the ASoC card registration fails and the codec component driver
never probes, the codec device is not initialized and therefore
memory for codec->wcaps is not allocated. This results in a NULL pointer
dereference when the codec driver suspend callback is invoked during
system suspend. Fix this by returning without performing any actions
during codec suspend/resume if the card was not registered successfully.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200728231011.1454066-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It's been reported that, when neither nouveau nor Nvidia graphics
driver is used, the screen starts flickering. And, after comparing
between the working case (stable 4.4.x) and the broken case, it turned
out that the problem comes from the audio component binding. The
Nvidia and AMD audio binding code clears the bus->keep_power flag
whenever snd_hdac_acomp_init() succeeds. But this doesn't mean that
the component is actually bound, but it merely indicates that it's
ready for binding. So, when both nouveau and Nvidia are blacklisted
or not ready, the driver keeps running without the audio component but
also with bus->keep_power = false. This made the driver runtime PM
kicked in and powering down when unused, which results in flickering
in the graphics side, as it seems.
For fixing the bug, this patch moves the bus->keep_power flag change
into generic_acomp_notifier_set() that is the function called from the
master_bind callback of component ops; i.e. it's guaranteed that the
binding succeeded.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208609
Fixes: 5a858e79c911 ("ALSA: hda - Disable audio component for legacy Nvidia HDMI codecs")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200728082033.23933-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We've received a regression report on Intel HD-audio controller that
wakes up immediately after S3 suspend. The bisection leads to the
commit c4c8dd6ef807 ("ALSA: hda: Skip controller resume if not
needed"). This commit replaces the system-suspend to use
pm_runtime_force_suspend() instead of the direct call of
__azx_runtime_suspend(). However, by some really mysterious reason,
pm_runtime_force_suspend() causes a spurious wakeup (although it calls
the same __azx_runtime_suspend() internally).
As an ugly workaround for now, revert the behavior to call
__azx_runtime_suspend() and __azx_runtime_resume() for those old Intel
platforms that may exhibit such a problem, while keeping the new
standard pm_runtime_force_suspend() and pm_runtime_force_resume()
pair for the remaining chips.
Fixes: c4c8dd6ef807 ("ALSA: hda: Skip controller resume if not needed")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208649
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200727164443.4233-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
board (alc256)
Intel requires to enable power saving mode for intel reference board (alc256)
Signed-off-by: PeiSen Hou <pshou@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200727115647.10967-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
G14(GA401) series with ALC289
This patch fixes a small typo I accidently submitted with the initial patch. The board should be named GA401 not G401.
Fixes: ff53664daff2 ("ALSA: hda/realtek: enable headset mic of ASUS ROG Zephyrus G14(G401) series with ALC289")
Signed-off-by: Armas Spann <zappel@retarded.farm>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200724140837.302763-1-zappel@retarded.farm
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
with ALC289
This patch adds support for headset mic to the ASUS ROG Zephyrus
G15(GA502) notebook series by adding the corresponding
vendor/pci_device id, as well as adding a new fixup for the used
realtek ALC289. The fixup stets the correct pin to get the headset mic
correctly recognized on audio-jack.
Signed-off-by: Armas Spann <zappel@retarded.farm>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200724140616.298892-1-zappel@retarded.farm
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into master
Pull sound fixes from Takashi Iwai:
"This became fairly large, containing mostly the collection of ASoC
fixes that slipped from the previous request, so I sent now a bit
earlier than usual. But all changes look small and mostly
device-specific, hence nothing to worry too much.
Majority of changes are for x86 based platforms and their CODEC
drivers, in order to address some issues hit by their recent tests and
fuzzing. The rest are other ASoC device-specific fixes (imx, qcom,
wm8974, amd, rockchip) as well as a trivial fix for a kernel WARNING
hit by syzkaller"
* tag 'sound-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
ALSA: hda/realtek: Fixed ALC298 sound bug by adding quirk for Samsung Notebook Pen S
ALSA: info: Drop WARN_ON() from buffer NULL sanity check
ASoC: rt5682: Report the button event in the headset type only
ASoC: Intel: bytcht_es8316: Add missed put_device()
ASoC: rt5682: Enable Vref2 under using PLL2
ASoC: rt286: fix unexpected interrupt happens
ASoC: wm8974: remove unsupported clock mode
ASoC: wm8974: fix Boost Mixer Aux Switch
ASoC: SOF: core: fix null-ptr-deref bug during device removal
ASoc: codecs: max98373: remove Idle_bias_on to let codec suspend
ASoC: codecs: max98373: Removed superfluous volume control from chip default
ASoC: topology: fix tlvs in error handling for widget_dmixer
ASoC: topology: fix kernel oops on route addition error
ASoC: SOF: imx: add min/max channels for SAI/ESAI on i.MX8/i.MX8M
ASoC: Intel: bdw-rt5677: fix non BE conversion
ASoC: soc-dai: set dai_link dpcm_ flags with a helper
MAINTAINERS: Add Shengjiu to reviewer list of sound/soc/fsl
ASoC: core: Remove only the registered component in devm functions
MAINTAINERS: Change Maintainer for some at91 drivers
ASoC: dt-bindings: simple-card: Fix 'make dt_binding_check' warnings
...
|
|
Follow the recent inclusive terminology guidelines and replace the
word "slave" in vmaster API. I chose the word "follower" at this time
since it seems fitting for the purpose.
Note that the word "master" is kept in API, since it refers rather to
audio master volume control.
Also, while we're at it, a typo in comments is corrected, too.
Link: https://lore.kernel.org/r/20200717154517.27599-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Delete the doubled word "of" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20200719180848.22572-1-rdunlap@infradead.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Notebook Pen S
Fixed no headphone sound bug on laptop Samsung Notebook Pen S
(950SBE-951SBE), by using existing patch in Linus' tree, commit
14425f1f521f (ALSA: hda/realtek: Add quirk for Samsung Notebook).
This laptop uses the same ALC298 but different subsystem id 0x144dc812.
I added SND_PCI_QUIRK at sound/pci/hda/patch_realtek.c
Signed-off-by: Joonho Wohn <doomsheart@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAHcbMh291aWDKiWSZoxXB4-Eru6OYRwGA4AVEdCZeYmVLo5ZxQ@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into master
Pull sound fixes from Takashi Iwai:
"No surprise here, just a few device-specific small fixes: two fixes
for USB LINE6 and one for USB-audio drivers wrt syzkaller fuzzer
issues, while the rest are all HD-audio Realtek quirks"
* tag 'sound-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - fixup for yet another Intel reference board
ALSA: hda/realtek - Enable Speaker for ASUS UX563
ALSA: hda/realtek - Enable Speaker for ASUS UX533 and UX534
ALSA: hda/realtek: Enable headset mic of Acer TravelMate B311R-31 with ALC256
ALSA: hda/realtek: enable headset mic of ASUS ROG Zephyrus G14(G401) series with ALC289
ALSA: hda/realtek - change to suitable link model for ASUS platform
ALSA: usb-audio: Fix race against the error recovery URB submission
ALSA: line6: Sync the pending work cancel at disconnection
ALSA: line6: Perform sanity check for each URB creation
|
|
Add the new PCI ID 0x0014 0x7a07 to support Loongson 7A1000 controller.
Signed-off-by: Kaige Li <likaige@loongson.cn>
Link: https://lore.kernel.org/r/1594954292-1703-2-git-send-email-likaige@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix a copy and paste error in snd_hda_codec_cleanup()
documentation.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200715174551.3730165-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
