summaryrefslogtreecommitdiff
path: root/sound/pci/lola
AgeCommit message (Collapse)AuthorFilesLines
2011-11-01sound: fix drivers needing module.h not moduleparam.hPaul Gortmaker1-1/+1
The implicit presence of module.h lured several users into incorrectly thinking that they only needed/used modparam.h but once we clean up the module.h presence, these will show up as build failures, so fix 'em now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24ALSA: lola - Fix for Lola280 boardMarkus Bollinger2-38/+94
- add/fix comments and debug messages - fix incomplete matrix init - comment out creation of buggy lola_dest_gain_mixer controls - minor optimisations Signed-off-by: Markus Bollinger <bollinger@digigram.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-17Merge branch 'fix/hda' into topic/miscTakashi Iwai1-1/+1
2011-06-15ALSA: lola - Fix section mismatchTakashi Iwai1-1/+1
Add missing __devinit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10ALSA: use KBUILD_MODNAME for request_irq argument in sound/pci/*Takashi Iwai1-1/+1
The name argument of request_irq() appears in /proc/interrupts, and it's quite ugly when the name entry contains a space or special letters. In general, it's simpler and more readable when the module name appears there, so let's replace all entries with KBUILD_MODNAME. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10ALSA: Use KBUILD_MODNAME for pci_driver.name entriesTakashi Iwai1-1/+1
The convention for pci_driver.name entry in kernel drivers seem to be the module name or equivalent ones. But, so far, almost all PCI sound drivers use more verbose name like "ABC Xyz (12)", and these are fairly confusing when appearing as a file name. This patch converts the all pci_driver.name entries in sound/pci/* to use KBUILD_MODNAME for more unified appearance. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-04ALSA: lola - fix lola buildRandy Dunlap1-1/+2
sound/pci/lola/Makefile was trying to build lola modules even when PCI and SND_LOLA were not enabled, causing build errors: ERROR: "snd_pcm_hw_constraint_step" [sound/pci/lola/snd-lola.ko] undefined! ERROR: "snd_pcm_period_elapsed" [sound/pci/lola/snd-lola.ko] undefined! ERROR: "snd_dma_alloc_pages" [sound/pci/lola/snd-lola.ko] undefined! ERROR: "snd_pcm_hw_constraint_integer" [sound/pci/lola/snd-lola.ko] undefined! ERROR: "snd_pcm_sgbuf_ops_page" [sound/pci/lola/snd-lola.ko] undefined! ERROR: "snd_pcm_set_ops" [sound/pci/lola/snd-lola.ko] undefined! ERROR: "snd_pcm_lib_free_pages" [sound/pci/lola/snd-lola.ko] undefined! ERROR: "snd_pcm_lib_ioctl" [sound/pci/lola/snd-lola.ko] undefined! ERROR: "snd_pcm_lib_malloc_pages" [sound/pci/lola/snd-lola.ko] undefined! ERROR: "snd_pcm_sgbuf_get_chunk_size" [sound/pci/lola/snd-lola.ko] undefined! ERROR: "snd_dma_free_pages" [sound/pci/lola/snd-lola.ko] undefined! ERROR: "snd_pcm_lib_preallocate_pages_for_all" [sound/pci/lola/snd-lola.ko] undefined! ERROR: "snd_pcm_new" [sound/pci/lola/snd-lola.ko] undefined! Fix the Makefile to build only when CONFIG_SND_LOLA is enabled. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03ALSA: lola - Yet another linux/delay.h inclusionTakashi Iwai1-0/+1
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03ALSA: lola - Add missing inclusion of linux/delay.hTakashi Iwai1-0/+1
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03ALSA: lola - Implement polling_mode like hd-audioTakashi Iwai2-3/+14
Also protect the call of lola_update_rirb() with spinlock. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03ALSA: lola - Rename to Digital SRC Capture SwitchTakashi Iwai3-3/+17
Renamed to Digial SRC Capture Switch for more correct representation. Also fixed analog volume control on Lola161611 and lola881. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03ALSA: lola - Add sync in loop implementationTakashi Iwai1-17/+59
For assuring the synchronized state with the pause operation, loop over the all linked streams and waits until all get ready in a loop. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03ALSA: lola - Add SRC refcountingTakashi Iwai2-7/+46
Added the refcounting for the exclusive SRC control. Also, fixed the possible stall after PCM pause operations. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03ALSA: lola - Allow granularity changesTakashi Iwai3-7/+27
Add some sanity checks. Change PCM parameters appropriately per granularity. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03ALSA: lola - Use SG-bufferTakashi Iwai2-23/+4
Completely switch to SG-buffer now, as it's working stably. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03ALSA: lola - Add Lola-specific module optionsTakashi Iwai1-10/+35
Added granularity and sample_rate_min module options. The former controls the h/w access granularity. As default, it's set to the max value 32. The latter controls the minimum sample rate in Hz, as default 16000. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03ALSA: lola - Fix PCM stallsTakashi Iwai3-47/+74
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03ALSA: lola - Use a single BDLTakashi Iwai2-31/+49
Use a single BDL for both buffers instead of allocating for each. Also a few tune-up to avoid the stream stalls in the PCM code and the prelimianry work for SG-buffer support are added, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03ALSA: lola - Suppress the debug printTakashi Iwai1-4/+4
Use snd_printdd() for less important debug messages. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03ALSA: lola - Changes in proc fileTakashi Iwai1-6/+142
The codec proc file becomes a read only that shows the codec widgets in a text form. A new proc file, codec_rw, is introduced instead for accessing the Lola verb directly by reading and writing to it. Also, regs proc file shows the contents of DSD, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03ALSA: lola - Make SRC helper globalTakashi Iwai2-4/+5
Make lola_sample_rate_convert() global so that it can be accessed from other files. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03ALSA: Add the driver for Digigram Lola PCI-e boardsTakashi Iwai7-0/+3095
Added a new driver for supporting Digigram Lola PCI-e boards. Lola has a similar h/w design like HD-audio but with extended verbs. Thus the driver is written similarly like HD-audio driver in the bus part. The codec part is rather written in a fixed way specific to the Lola board because of the verb incompatibility. The driver provides basic PCM, supporting multi-streams and mixing. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 20:27:37 +0300