summaryrefslogtreecommitdiff
path: root/sound/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-12-07ALSA: drivers: remove __dev* attributesBill Pemberton14-99/+99
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-22ALSA: vx: hard dependency on the standard fw loaderTakashi Iwai2-139/+1
Yet again like previous two commits, drop the old hwdep user-space firmware code from vx driver (snd-vxpocket and snd-vx222). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-25ALSA: sound/drivers: remove CONFIG_EXPERIMENTALKees Cook1-1/+0
This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-21ALSA: aloop - Close races at restarting the streamTakashi Iwai1-17/+19
There are small races opened in the check of running bit and the timer lock. Instead of adding yet more flag, just protect the whole racy codes with the existing cable->lock. As a bonus, we can get rid of timer_lock now. Reported-and-tested-by: Omair Mohammed Abdullah <omair.m.abdullah@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-21Merge branch 'dummy-ctl-inactive' of ↵Takashi Iwai1-2/+71
git://git.alsa-project.org/alsa-kprivate into for-next Quite a few mixer applications do not handle deactivated controls correctly. This patch adds such controls to snd-dummy to make crash^H^H^H^H^Htesting these apps easier.
2012-10-21ALSA: dummy: allow disabling mixer controlsClemens Ladisch1-2/+71
To make the testing of deactivated mixer controls easier (and for people with common hardware, possible), add a control that deactivates some other controls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2012-10-06ALSA: aloop - add locking to timer accessOmair Mohammed Abdullah1-0/+6
When the loopback timer handler is running, calling del_timer() (for STOP trigger) will not wait for the handler to complete before deactivating the timer. The timer gets rescheduled in the handler as usual. Then a subsequent START trigger will try to start the timer using add_timer() with a timer pending leading to a kernel panic. Serialize the calls to add_timer() and del_timer() using a spin lock to avoid this. Signed-off-by: Omair Mohammed Abdullah <omair.m.abdullah@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-06sound: Remove unnecessary semicolonPeter Senna Tschudin2-2/+2
A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r1@ statement S; position p,p1; @@ S@p1;@p @script:python r2@ p << r1.p; p1 << r1.p1; @@ if p[0].line != p1[0].line_end: cocci.include_match(False) @@ position r1.p; @@ -;@p // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-05ALSA: opl4: use list_move_tail instead of list_del/list_add_tailWei Yongjun1-6/+3
Using list_move_tail() instead of list_del() + list_add_tail(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-09ALSA: platform: Check CONFIG_PM_SLEEP instead of CONFIG_PMTakashi Iwai3-4/+4
When CONFIG_PM is set but CONFIG_PM_SLEEP is unset, SIMPLE_DEV_PM_OPS() ignores the given functions, and this leads to compile warnings. For avoiding this, simply check CONFIG_PM_SLEEP instead of CONFIG_PM. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-25ALSA: mpu401: Fix missing initialization of irq fieldTakashi Iwai1-0/+1
The irq field of struct snd_mpu401 is supposed to be initialized to -1. Since it's set to zero as of now, a probing error before the irq installation results in a kernel warning "Trying to free already-free IRQ 0". Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44821 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03ALSA: Convert to new pm_ops for PCI driversTakashi Iwai1-1/+1
Straightforward conversion to the new pm_ops from the legacy suspend/resume ops. Since we change vx222, vx_core and vxpocket have to be converted, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03ALSA: convert PM ops of platform_driver to new pm opsTakashi Iwai3-21/+27
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-02ALSA: Add missing .owner=THIS_MODULE to platform_driver definitionsTakashi Iwai8-8/+16
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-15ALSA: snd-aloop - improve the sample copy accurracyJaroslav Kysela1-27/+35
Maintain both streams (playback, capture) synchronized. Previous code didn't take in account the small byte count drifts caused by the irq position rounding. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-31Documentation: remove references to /etc/modprobe.confLucas De Marchi1-1/+2
Usage of /etc/modprobe.conf file was deprecated by module-init-tools and is no longer parsed by new kmod tool. References to this file are replaced in Documentation, comments and Kconfig according to the context. There are also some references to the old /etc/modules.conf from 2.4 kernels that are being removed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-19ALSA: module_param: make bool parameters really boolRusty Russell12-18/+18
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-27ALSA: convert sound/* to use module_platform_driver()Axel Lin1-12/+1
This patch converts the drivers in sound/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-01sound: Add export.h for THIS_MODULE/EXPORT_SYMBOL where neededPaul Gortmaker3-0/+3
These aren't modules, but they do make use of these macros, so they will need export.h to get that definition. Previously, they got it via the implicit module.h inclusion. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-11-01sound: Add module.h to the previously silent sound usersPaul Gortmaker10-0/+10
Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-11-01sound: fix drivers needing module.h not moduleparam.hPaul Gortmaker7-7/+7
The implicit presence of module.h lured several users into incorrectly thinking that they only needed/used modparam.h but once we clean up the module.h presence, these will show up as build failures, so fix 'em now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-27Merge branch 'topic/remove-irqf_disable' into for-linusTakashi Iwai4-5/+5
2011-09-24ALSA: aloop - Use vmalloc bufferTakashi Iwai1-6/+7
snd-aloop driver is virtual and has no need for allocating contiguous pages. It'll be more system-friendly to use vmalloc buffers. Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-22sound: irq: Remove IRQF_DISABLEDYong Zhang4-5/+5
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14ALSA: mpu401: clean up interrupt specificationClemens Ladisch2-12/+11
The semantics of snd_mpu401_uart_new()'s interrupt parameters are somewhat counterintuitive: To prevent the function from allocating its own interrupt, either the irq number must be invalid, or the irq_flags parameter must be zero. At the same time, the irq parameter being invalid specifies that the mpu401 code has to work without an interrupt allocated by the caller. This implies that, if there is an interrupt and it is allocated by the caller, the irq parameter must be set to a valid-looking number which then isn't actually used. With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value, which forces us to handle the parameters differently. This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the device interrupt is handled by the caller, and makes the allocation of the interrupt to depend only on the irq parameter. As suggested by Takashi, the irq_flags parameter was dropped because, when used, it had the constant value IRQF_DISABLED. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-09i8253: Make pcsp sound driver use the shared i8253_lockRalf Baechle1-7/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Jaroslav Kysela <perex@perex.cz> Acked-by: Takashi Iwai <tiwai@suse.de> Cc: alsa-devel@alsa-project.org Link: http://lkml.kernel.org/r/20110601180610.532642190@duck.linux-mips.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-06-09i8253: Create linux/i8253.h and use it in all 8253 related filesRalf Baechle1-1/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Link: http://lkml.kernel.org/r/20110601180610.054254048@duck.linux-mips.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de> arch/arm/mach-footbridge/isa-timer.c | 2 +- arch/mips/cobalt/time.c | 2 +- arch/mips/jazz/irq.c | 2 +- arch/mips/kernel/i8253.c | 2 +- arch/mips/mti-malta/malta-time.c | 2 +- arch/mips/sgi-ip22/ip22-time.c | 2 +- arch/mips/sni/time.c | 2 +- arch/x86/kernel/apic/apic.c | 2 +- arch/x86/kernel/apm_32.c | 2 +- arch/x86/kernel/hpet.c | 2 +- arch/x86/kernel/i8253.c | 2 +- arch/x86/kernel/time.c | 2 +- drivers/block/hd.c | 2 +- drivers/clocksource/i8253.c | 2 +- drivers/input/gameport/gameport.c | 2 +- drivers/input/joystick/analog.c | 2 +- drivers/input/misc/pcspkr.c | 2 +- include/linux/i8253.h | 11 +++++++++++ sound/drivers/pcsp/pcsp.h | 2 +- 19 files changed, 29 insertions(+), 18 deletions(-)
2011-03-31Fix common misspellingsLucas De Marchi2-3/+3
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-18ALSA: aloop - Fix possible IRQ lock inversionTakashi Iwai1-10/+9
loopback_pos_update() can be called in the timer callback, thus the lock held should be irq-safe. Otherwise you'll get AB/BA deadlock together with substream->self_group.lock. Reported-and-tested-by: Knut Petersen <Knut_Petersen@t-online.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-02ALSA: use linux/io.h to fix compile warningsTakashi Iwai1-2/+1
For helping to reduce Greert's regression list... src/sound/drivers/mtpav.c: error: implicit declaration of function 'inb' src/sound/drivers/mtpav.c: error: implicit declaration of function 'outb' ... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-14ALSA: ml403-ac97cr: Use vsprintf extension %pR for struct resourceJoe Perches1-2/+2
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-20Merge remote branch 'alsa/devel' into topic/miscTakashi Iwai1-16/+123
2010-10-20ALSA: snd-aloop - add pause supportJaroslav Kysela1-5/+22
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-10-20ALSA: snd-aloop - fix locking issues (running flag updates)Jaroslav Kysela1-13/+19
On SMP machines, the cable->running update must be atomic, otherwise stream is not started correctly sometimes. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-10-18ALSA: snd-aloop: add cable#0 and cable#1 files to proc card treeJaroslav Kysela1-0/+84
Show some useful runtime information using procfs. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-10-17Merge remote branch 'alsa/devel' into topic/miscTakashi Iwai1-1/+7
2010-10-14ALSA: snd-aloop - fix issue in the timer start functionJaroslav Kysela1-1/+7
In some circumstances (the rate shift value was changed), the irq_pos value may be higher than the fraction value in the timer start function. Check for it. Also, to avoid value overflow, decrease maximum period size. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-10-11Merge remote branch 'alsa/devel' into topic/miscTakashi Iwai1-18/+106
2010-10-11ALSA: snd-aloop: Fix hw_params restrictions and checkingJaroslav Kysela1-18/+106
This patch fixes the hw_params restrictions when first (or playback) stream sets the final hardware parameters. Also, fix the hw_params checking in the trigger callback. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-10-04Merge remote branch 'alsa/devel' into topic/miscTakashi Iwai1-1/+1
2010-10-02ALSA: snd-aloop - fix "PCM Slave Active" element read valueJaroslav Kysela1-1/+1
Simple coding fix. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-09-30Merge remote branch 'alsa/devel' into topic/miscTakashi Iwai1-2/+4
2010-09-30ALSA: snd-aloop - fix capture buffer silenceJaroslav Kysela1-2/+4
In a special case, some old samples are left in the capture ring buffer. Fix it. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-09-22Merge remote branch 'alsa/devel' into topic/miscTakashi Iwai1-1/+1
2010-09-15ALSA: snd-aloop - fix the "PCM Playback Channels" kcontrolJaroslav Kysela1-1/+1
Obvious copy-and-paste error. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-09-07sound: Remove unnecessary casts of private_dataJoe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-18Merge branch 'topic/aloop' into topic/miscTakashi Iwai3-0/+1076
2010-08-09ALSA: introduce the snd-aloop module for the PCM loopbackJaroslav Kysela3-0/+1076
The snd-aloop module allows redirecting of the PCM playback in the kernel back to the user space using the standard ALSA PCM capture API. The module also allows time synchronization with another timing source and notifications of playback stream parameter changes. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-08-08Merge branch 'for-linus' of ↵Linus Torvalds1-3/+21
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (214 commits) ALSA: hda - Add pin-fix for HP dc5750 ALSA: als4000: Fix potentially invalid DMA mode setup ALSA: als4000: enable burst mode ALSA: hda - Fix initial capsrc selection in patch_alc269() ASoC: TWL4030: Capture route runtime DAPM ordering fix ALSA: hda - Add PC-beep whitelist for an Intel board ALSA: hda - More relax for pending period handling ALSA: hda - Define AC_FMT_* constants ALSA: hda - Fix beep frequency on IDT 92HD73xx and 92HD71Bxx codecs ALSA: hda - Add support for HDMI HBR passthrough ALSA: hda - Set Stream Type in Stream Format according to AES0 ALSA: hda - Fix Thinkpad X300 so SPDIF is not exposed ALSA: hda - FIX to not expose SPDIF on Thinkpad X301, since it does not have the ability to use SPDIF ASoC: wm9081: fix resource reclaim in wm9081_register error path ASoC: wm8978: fix a memory leak if a wm8978_register fail ASoC: wm8974: fix a memory leak if another WM8974 is registered ASoC: wm8961: fix resource reclaim in wm8961_register error path ASoC: wm8955: fix resource reclaim in wm8955_register error path ASoC: wm8940: fix a memory leak if wm8940_register return error ASoC: wm8904: fix resource reclaim in wm8904_register error path ...
2010-07-15ALSA: Kconfig: SND_AC97_POWER_SAVE description improvementMichael Witten1-3/+21
The description has been expanded to explain the time-out value provided by the power_save module parameter. Signed-off-by: Michael Witten <mfwitten@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-01 00:14:52 +0300