summaryrefslogtreecommitdiff
path: root/security/selinux
AgeCommit message (Collapse)AuthorFilesLines
2021-12-22selinux: fix sleeping function called from invalid contextScott Mayhew1-14/+19
commit cc274ae7763d9700a56659f3228641d7069e7a3f upstream. selinux_sb_mnt_opts_compat() is called via sget_fc() under the sb_lock spinlock, so it can't use GFP_KERNEL allocations: [ 868.565200] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:230 [ 868.568246] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 4914, name: mount.nfs [ 868.569626] preempt_count: 1, expected: 0 [ 868.570215] RCU nest depth: 0, expected: 0 [ 868.570809] Preemption disabled at: [ 868.570810] [<0000000000000000>] 0x0 [ 868.571848] CPU: 1 PID: 4914 Comm: mount.nfs Kdump: loaded Tainted: G W 5.16.0-rc5.2585cf9dfa #1 [ 868.573273] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-4.fc34 04/01/2014 [ 868.574478] Call Trace: [ 868.574844] <TASK> [ 868.575156] dump_stack_lvl+0x34/0x44 [ 868.575692] __might_resched.cold+0xd6/0x10f [ 868.576308] slab_pre_alloc_hook.constprop.0+0x89/0xf0 [ 868.577046] __kmalloc_track_caller+0x72/0x420 [ 868.577684] ? security_context_to_sid_core+0x48/0x2b0 [ 868.578569] kmemdup_nul+0x22/0x50 [ 868.579108] security_context_to_sid_core+0x48/0x2b0 [ 868.579854] ? _nfs4_proc_pathconf+0xff/0x110 [nfsv4] [ 868.580742] ? nfs_reconfigure+0x80/0x80 [nfs] [ 868.581355] security_context_str_to_sid+0x36/0x40 [ 868.581960] selinux_sb_mnt_opts_compat+0xb5/0x1e0 [ 868.582550] ? nfs_reconfigure+0x80/0x80 [nfs] [ 868.583098] security_sb_mnt_opts_compat+0x2a/0x40 [ 868.583676] nfs_compare_super+0x113/0x220 [nfs] [ 868.584249] ? nfs_try_mount_request+0x210/0x210 [nfs] [ 868.584879] sget_fc+0xb5/0x2f0 [ 868.585267] nfs_get_tree_common+0x91/0x4a0 [nfs] [ 868.585834] vfs_get_tree+0x25/0xb0 [ 868.586241] fc_mount+0xe/0x30 [ 868.586605] do_nfs4_mount+0x130/0x380 [nfsv4] [ 868.587160] nfs4_try_get_tree+0x47/0xb0 [nfsv4] [ 868.587724] vfs_get_tree+0x25/0xb0 [ 868.588193] do_new_mount+0x176/0x310 [ 868.588782] __x64_sys_mount+0x103/0x140 [ 868.589388] do_syscall_64+0x3b/0x90 [ 868.589935] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 868.590699] RIP: 0033:0x7f2b371c6c4e [ 868.591239] Code: 48 8b 0d dd 71 0e 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d aa 71 0e 00 f7 d8 64 89 01 48 [ 868.593810] RSP: 002b:00007ffc83775d88 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 [ 868.594691] RAX: ffffffffffffffda RBX: 00007ffc83775f10 RCX: 00007f2b371c6c4e [ 868.595504] RDX: 0000555d517247a0 RSI: 0000555d51724700 RDI: 0000555d51724540 [ 868.596317] RBP: 00007ffc83775f10 R08: 0000555d51726890 R09: 0000555d51726890 [ 868.597162] R10: 0000000000000000 R11: 0000000000000246 R12: 0000555d51726890 [ 868.598005] R13: 0000000000000003 R14: 0000555d517246e0 R15: 0000555d511ac925 [ 868.598826] </TASK> Cc: stable@vger.kernel.org Fixes: 69c4a42d72eb ("lsm,selinux: add new hook to compare new mount to an existing mount") Signed-off-by: Scott Mayhew <smayhew@redhat.com> [PM: cleanup/line-wrap the backtrace] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25selinux: fix NULL-pointer dereference when hashtab allocation failsOndrej Mosnacek1-5/+12
commit dc27f3c5d10c58069672215787a96b4fae01818b upstream. When the hash table slot array allocation fails in hashtab_init(), h->size is left initialized with a non-zero value, but the h->htable pointer is NULL. This may then cause a NULL pointer dereference, since the policydb code relies on the assumption that even after a failed hashtab_init(), hashtab_map() and hashtab_destroy() can be safely called on it. Yet, these detect an empty hashtab only by looking at the size. Fix this by making sure that hashtab_init() always leaves behind a valid empty hashtab when the allocation fails. Cc: stable@vger.kernel.org Fixes: 03414a49ad5f ("selinux: do not allocate hashtabs dynamically") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18selinux: fix race condition when computing ocontext SIDsOndrej Mosnacek1-85/+77
commit cbfcd13be5cb2a07868afe67520ed181956579a7 upstream. Current code contains a lot of racy patterns when converting an ocontext's context structure to an SID. This is being done in a "lazy" fashion, such that the SID is looked up in the SID table only when it's first needed and then cached in the "sid" field of the ocontext structure. However, this is done without any locking or memory barriers and is thus unsafe. Between commits 24ed7fdae669 ("selinux: use separate table for initial SID lookup") and 66f8e2f03c02 ("selinux: sidtab reverse lookup hash table"), this race condition lead to an actual observable bug, because a pointer to the shared sid field was passed directly to sidtab_context_to_sid(), which was using this location to also store an intermediate value, which could have been read by other threads and interpreted as an SID. In practice this caused e.g. new mounts to get a wrong (seemingly random) filesystem context, leading to strange denials. This bug has been spotted in the wild at least twice, see [1] and [2]. Fix the race condition by making all the racy functions use a common helper that ensures the ocontext::sid accesses are made safely using the appropriate SMP constructs. Note that security_netif_sid() was populating the sid field of both contexts stored in the ocontext, but only the first one was actually used. The SELinux wiki's documentation on the "netifcon" policy statement [3] suggests that using only the first context is intentional. I kept only the handling of the first context here, as there is really no point in doing the SID lookup for the unused one. I wasn't able to reproduce the bug mentioned above on any kernel that includes commit 66f8e2f03c02, even though it has been reported that the issue occurs with that commit, too, just less frequently. Thus, I wasn't able to verify that this patch fixes the issue, but it makes sense to avoid the race condition regardless. [1] https://github.com/containers/container-selinux/issues/89 [2] https://lists.fedoraproject.org/archives/list/selinux@lists.fedoraproject.org/thread/6DMTAMHIOAOEMUAVTULJD45JZU7IBAFM/ [3] https://selinuxproject.org/page/NetworkStatements#netifcon Cc: stable@vger.kernel.org Cc: Xinjie Zheng <xinjie@google.com> Reported-by: Sujithra Periasamy <sujithra@google.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-12binder: use cred instead of task for selinux checksTodd Kjos1-35/+13
commit 52f88693378a58094c538662ba652aff0253c4fe upstream. Since binder was integrated with selinux, it has passed 'struct task_struct' associated with the binder_proc to represent the source and target of transactions. The conversion of task to SID was then done in the hook implementations. It turns out that there are race conditions which can result in an incorrect security context being used. Fix by using the 'struct cred' saved during binder_open and pass it to the selinux subsystem. Cc: stable@vger.kernel.org # 5.14 (need backport for earlier stables) Fixes: 79af73079d75 ("Add security hooks to binder and implement the hooks for SELinux.") Suggested-by: Jann Horn <jannh@google.com> Signed-off-by: Todd Kjos <tkjos@google.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-07Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/David S. Miller1-1/+3
ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2021-10-07 1) Fix a sysbot reported shift-out-of-bounds in xfrm_get_default. From Pavel Skripkin. 2) Fix XFRM_MSG_MAPPING ABI breakage. The new XFRM_MSG_MAPPING messages were accidentally not paced at the end. Fix by Eugene Syromiatnikov. 3) Fix the uapi for the default policy, use explicit field and macros and make it accessible to userland. From Nicolas Dichtel. 4) Fix a missing rcu lock in xfrm_notify_userpolicy(). From Nicolas Dichtel. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23selinux,smack: fix subjective/objective credential use mixupsPaul Moore1-2/+2
Jann Horn reported a problem with commit eb1231f73c4d ("selinux: clarify task subjective and objective credentials") where some LSM hooks were attempting to access the subjective credentials of a task other than the current task. Generally speaking, it is not safe to access another task's subjective credentials and doing so can cause a number of problems. Further, while looking into the problem, I realized that Smack was suffering from a similar problem brought about by a similar commit 1fb057dcde11 ("smack: differentiate between subjective and objective task credentials"). This patch addresses this problem by restoring the use of the task's objective credentials in those cases where the task is other than the current executing task. Not only does this resolve the problem reported by Jann, it is arguably the correct thing to do in these cases. Cc: stable@vger.kernel.org Fixes: eb1231f73c4d ("selinux: clarify task subjective and objective credentials") Fixes: 1fb057dcde11 ("smack: differentiate between subjective and objective task credentials") Reported-by: Jann Horn <jannh@google.com> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-09-14include/uapi/linux/xfrm.h: Fix XFRM_MSG_MAPPING ABI breakageEugene Syromiatnikov1-1/+3
Commit 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy") broke ABI by changing the value of the XFRM_MSG_MAPPING enum item, thus also evading the build-time check in security/selinux/nlmsgtab.c:selinux_nlmsg_lookup for presence of proper security permission checks in nlmsg_xfrm_perms. Fix it by placing XFRM_MSG_SETDEFAULT/XFRM_MSG_GETDEFAULT to the end of the enum, right before __XFRM_MSG_MAX, and updating the nlmsg_xfrm_perms accordingly. Fixes: 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy") References: https://lore.kernel.org/netdev/20210901151402.GA2557@altlinux.org/ Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com> Acked-by: Antony Antony <antony.antony@secunet.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-09-02Merge tag 'integrity-v5.15' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity subsystem updates from Mimi Zohar: - Limit the allowed hash algorithms when writing security.ima xattrs or verifying them, based on the IMA policy and the configured hash algorithms. - Return the calculated "critical data" measurement hash and size to avoid code duplication. (Preparatory change for a proposed LSM.) - and a single patch to address a compiler warning. * tag 'integrity-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: IMA: reject unknown hash algorithms in ima_get_hash_algo IMA: prevent SETXATTR_CHECK policy rules with unavailable algorithms IMA: introduce a new policy option func=SETXATTR_CHECK IMA: add a policy option to restrict xattr hash algorithms on appraisal IMA: add support to restrict the hash algorithms used for file appraisal IMA: block writes of the security.ima xattr with unsupported algorithms IMA: remove the dependency on CRYPTO_MD5 ima: Add digest and digest_len params to the functions to measure a buffer ima: Return int in the functions to measure a buffer ima: Introduce ima_get_current_hash_algo() IMA: remove -Wmissing-prototypes warning
2021-09-01Merge tag 'net-next-5.15' of ↵Linus Torvalds2-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Enable memcg accounting for various networking objects. BPF: - Introduce bpf timers. - Add perf link and opaque bpf_cookie which the program can read out again, to be used in libbpf-based USDT library. - Add bpf_task_pt_regs() helper to access user space pt_regs in kprobes, to help user space stack unwinding. - Add support for UNIX sockets for BPF sockmap. - Extend BPF iterator support for UNIX domain sockets. - Allow BPF TCP congestion control progs and bpf iterators to call bpf_setsockopt(), e.g. to switch to another congestion control algorithm. Protocols: - Support IOAM Pre-allocated Trace with IPv6. - Support Management Component Transport Protocol. - bridge: multicast: add vlan support. - netfilter: add hooks for the SRv6 lightweight tunnel driver. - tcp: - enable mid-stream window clamping (by user space or BPF) - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD - more accurate DSACK processing for RACK-TLP - mptcp: - add full mesh path manager option - add partial support for MP_FAIL - improve use of backup subflows - optimize option processing - af_unix: add OOB notification support. - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the router. - mac80211: Target Wake Time support in AP mode. - can: j1939: extend UAPI to notify about RX status. Driver APIs: - Add page frag support in page pool API. - Many improvements to the DSA (distributed switch) APIs. - ethtool: extend IRQ coalesce uAPI with timer reset modes. - devlink: control which auxiliary devices are created. - Support CAN PHYs via the generic PHY subsystem. - Proper cross-chip support for tag_8021q. - Allow TX forwarding for the software bridge data path to be offloaded to capable devices. Drivers: - veth: more flexible channels number configuration. - openvswitch: introduce per-cpu upcall dispatch. - Add internet mix (IMIX) mode to pktgen. - Transparently handle XDP operations in the bonding driver. - Add LiteETH network driver. - Renesas (ravb): - support Gigabit Ethernet IP - NXP Ethernet switch (sja1105): - fast aging support - support for "H" switch topologies - traffic termination for ports under VLAN-aware bridge - Intel 1G Ethernet - support getcrosststamp() with PCIe PTM (Precision Time Measurement) for better time sync - support Credit-Based Shaper (CBS) offload, enabling HW traffic prioritization and bandwidth reservation - Broadcom Ethernet (bnxt) - support pulse-per-second output - support larger Rx rings - Mellanox Ethernet (mlx5) - support ethtool RSS contexts and MQPRIO channel mode - support LAG offload with bridging - support devlink rate limit API - support packet sampling on tunnels - Huawei Ethernet (hns3): - basic devlink support - add extended IRQ coalescing support - report extended link state - Netronome Ethernet (nfp): - add conntrack offload support - Broadcom WiFi (brcmfmac): - add WPA3 Personal with FT to supported cipher suites - support 43752 SDIO device - Intel WiFi (iwlwifi): - support scanning hidden 6GHz networks - support for a new hardware family (Bz) - Xen pv driver: - harden netfront against malicious backends - Qualcomm mobile - ipa: refactor power management and enable automatic suspend - mhi: move MBIM to WWAN subsystem interfaces Refactor: - Ambient BPF run context and cgroup storage cleanup. - Compat rework for ndo_ioctl. Old code removal: - prism54 remove the obsoleted driver, deprecated by the p54 driver. - wan: remove sbni/granch driver" * tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits) net: Add depends on OF_NET for LiteX's LiteETH ipv6: seg6: remove duplicated include net: hns3: remove unnecessary spaces net: hns3: add some required spaces net: hns3: clean up a type mismatch warning net: hns3: refine function hns3_set_default_feature() ipv6: remove duplicated 'net/lwtunnel.h' include net: w5100: check return value after calling platform_get_resource() net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx() net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource() net: mdio-ipq4019: Make use of devm_platform_ioremap_resource() fou: remove sparse errors ipv4: fix endianness issue in inet_rtm_getroute_build_skb() octeontx2-af: Set proper errorcode for IPv4 checksum errors octeontx2-af: Fix static code analyzer reported issues octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg octeontx2-af: Fix loop in free and unmap counter af_unix: fix potential NULL deref in unix_dgram_connect() dpaa2-eth: Replace strlcpy with strscpy octeontx2-af: Use NDC TX for transmit packet data ...
2021-08-31Merge tag 'selinux-pr-20210830' of ↵Linus Torvalds2-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux update from Paul Moore: "We've got an unusually small SELinux pull request for v5.15 that consists of only one (?!) patch that is really pretty minor when you look at it. Unsurprisingly it passes all of our tests and merges cleanly on top of your tree right now, please merge this for v5.15" * tag 'selinux-pr-20210830' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: return early for possible NULL audit buffers
2021-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-6/+4
Build failure in drivers/net/wwan/mhi_wwan_mbim.c: add missing parameter (0, assuming we don't want buffer pre-alloc). Conflict in drivers/net/dsa/sja1105/sja1105_main.c between: 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") 0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") Follow the instructions from the commit message of the former commit - removed the if conditions. When looking at commit 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") note that the mask_iotag fields get removed by the following patch. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-02selinux: correct the return value when loads initial sidsXiu Jianfeng1-6/+4
It should not return 0 when SID 0 is assigned to isids. This patch fixes it. Cc: stable@vger.kernel.org Fixes: e3e0b582c321a ("selinux: remove unused initial SIDs and improve handling") Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> [PM: remove changelog from description] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-07-29mctp: Add MCTP baseJeremy Kerr2-2/+6
Add basic Kconfig, an initial (empty) af_mctp source object, and {AF,PF}_MCTP definitions, and the required definitions for a new protocol type. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23ima: Add digest and digest_len params to the functions to measure a bufferRoberto Sassu1-2/+4
This patch performs the final modification necessary to pass the buffer measurement to callers, so that they provide a functionality similar to ima_file_hash(). It adds the 'digest' and 'digest_len' parameters to ima_measure_critical_data() and process_buffer_measurement(). These functions calculate the digest even if there is no suitable rule in the IMA policy and, in this case, they simply return 1 before generating a new measurement entry. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-07-14selinux: return early for possible NULL audit buffersAustin Kim2-0/+6
audit_log_start() may return NULL in below cases: - when audit is not initialized. - when audit backlog limit exceeds. After the call to audit_log_start() is made and then possible NULL audit buffer argument is passed to audit_log_*() functions, audit_log_*() functions return immediately in case of a NULL audit buffer argument. But it is optimal to return early when audit_log_start() returns NULL, because it is not necessary for audit_log_*() functions to be called with NULL audit buffer argument. So add exception handling for possible NULL audit buffers where return value can be handled from callers. Signed-off-by: Austin Kim <austin.kim@lge.com> [PM: tweak subject line] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-06-11selinux: kill 'flags' argument in avc_has_perm_flags() and avc_audit()Al Viro3-31/+5
... along with avc_has_perm_flags() itself, since now it's identical to avc_has_perm() (as pointed out by Paul Moore) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [PM: add "selinux:" prefix to subj and tweak for length] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-06-11selinux: slow_avc_audit has become non-blockingAl Viro3-35/+10
dump_common_audit_data() is safe to use under rcu_read_lock() now; no need for AVC_NONBLOCKING and games around it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-06-11selinux: Fix kernel-docYang Li1-1/+22
Fix function name and add comment for parameter state in ss/services.c kernel-doc to remove some warnings found by running make W=1 LLVM=1. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-06-11selinux: use __GFP_NOWARN with GFP_NOWAIT in the AVCMinchan Kim1-6/+7
In the field, we have seen lots of allocation failure from the call path below. 06-03 13:29:12.999 1010315 31557 31557 W Binder : 31542_2: page allocation failure: order:0, mode:0x800(GFP_NOWAIT), nodemask=(null),cpuset=background,mems_allowed=0 ... ... 06-03 13:29:12.999 1010315 31557 31557 W Call trace: 06-03 13:29:12.999 1010315 31557 31557 W : dump_backtrace.cfi_jt+0x0/0x8 06-03 13:29:12.999 1010315 31557 31557 W : dump_stack+0xc8/0x14c 06-03 13:29:12.999 1010315 31557 31557 W : warn_alloc+0x158/0x1c8 06-03 13:29:12.999 1010315 31557 31557 W : __alloc_pages_slowpath+0x9d8/0xb80 06-03 13:29:12.999 1010315 31557 31557 W : __alloc_pages_nodemask+0x1c4/0x430 06-03 13:29:12.999 1010315 31557 31557 W : allocate_slab+0xb4/0x390 06-03 13:29:12.999 1010315 31557 31557 W : ___slab_alloc+0x12c/0x3a4 06-03 13:29:12.999 1010315 31557 31557 W : kmem_cache_alloc+0x358/0x5e4 06-03 13:29:12.999 1010315 31557 31557 W : avc_alloc_node+0x30/0x184 06-03 13:29:12.999 1010315 31557 31557 W : avc_update_node+0x54/0x4f0 06-03 13:29:12.999 1010315 31557 31557 W : avc_has_extended_perms+0x1a4/0x460 06-03 13:29:12.999 1010315 31557 31557 W : selinux_file_ioctl+0x320/0x3d0 06-03 13:29:12.999 1010315 31557 31557 W : __arm64_sys_ioctl+0xec/0x1fc 06-03 13:29:12.999 1010315 31557 31557 W : el0_svc_common+0xc0/0x24c 06-03 13:29:12.999 1010315 31557 31557 W : el0_svc+0x28/0x88 06-03 13:29:12.999 1010315 31557 31557 W : el0_sync_handler+0x8c/0xf0 06-03 13:29:12.999 1010315 31557 31557 W : el0_sync+0x1a4/0x1c0 .. .. 06-03 13:29:12.999 1010315 31557 31557 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:12.999 1010315 31557 31557 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:12.999 1010315 31557 31557 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:12.999 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:12.999 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:12.999 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:12.999 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:12.999 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:12.999 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:12.999 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:12.999 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:12.999 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:13.000 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:13.000 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:13.000 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 10230 30892 30892 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 10230 30892 30892 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:13.000 10230 30892 30892 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 10230 30892 30892 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 10230 30892 30892 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 Based on [1], selinux is tolerate for failure of memory allocation. Then, use __GFP_NOWARN together. [1] 476accbe2f6e ("selinux: use GFP_NOWAIT in the AVC kmem_caches") Signed-off-by: Minchan Kim <minchan@kernel.org> [PM: subj fix, line wraps, normalized commit refs] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-05-14lsm_audit,selinux: pass IB device name by referenceOndrej Mosnacek1-1/+1
While trying to address a Coverity warning that the dev_name string might end up unterminated when strcpy'ing it in selinux_ib_endport_manage_subnet(), I realized that it is possible (and simpler) to just pass the dev_name pointer directly, rather than copying the string to a buffer. The ibendport variable goes out of scope at the end of the function anyway, so the lifetime of the dev_name pointer will never be shorter than that of ibendport, thus we can safely just pass the dev_name pointer and be done with it. Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Acked-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-05-11selinux: Remove redundant assignment to rcJiapeng Chong2-5/+0
Variable rc is set to '-EINVAL' but this value is never read as it is overwritten or not used later on, hence it is a redundant assignment and can be removed. Cleans up the following clang-analyzer warning: security/selinux/ss/services.c:2103:3: warning: Value stored to 'rc' is never read [clang-analyzer-deadcode.DeadStores]. security/selinux/ss/services.c:2079:2: warning: Value stored to 'rc' is never read [clang-analyzer-deadcode.DeadStores]. security/selinux/ss/services.c:2071:2: warning: Value stored to 'rc' is never read [clang-analyzer-deadcode.DeadStores]. security/selinux/ss/services.c:2062:2: warning: Value stored to 'rc' is never read [clang-analyzer-deadcode.DeadStores]. security/selinux/ss/policydb.c:2592:3: warning: Value stored to 'rc' is never read [clang-analyzer-deadcode.DeadStores]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-05-11selinux: Corrected comment to match kernel-doc commentSouptick Joarder1-1/+1
Minor documentation update. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-05-11selinux: delete selinux_xfrm_policy_lookup() useless argumentZhongjun Tan2-2/+2
seliunx_xfrm_policy_lookup() is hooks of security_xfrm_policy_lookup(). The dir argument is uselss in security_xfrm_policy_lookup(). So remove the dir argument from selinux_xfrm_policy_lookup() and security_xfrm_policy_lookup(). Signed-off-by: Zhongjun Tan <tanzhongjun@yulong.com> [PM: reformat the subject line] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-05-11selinux: constify some avtab function argumentsOndrej Mosnacek3-21/+26
This makes the code a bit easier to reason about. Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-05-11selinux: simplify duplicate_policydb_cond_list() by using kmemdup()Ondrej Mosnacek1-5/+6
We can do the allocation + copying of expr.nodes in one go using kmemdup(). Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-05-02Merge tag 'landlock_v34' of ↵Linus Torvalds3-37/+30
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull Landlock LSM from James Morris: "Add Landlock, a new LSM from Mickaël Salaün. Briefly, Landlock provides for unprivileged application sandboxing. From Mickaël's cover letter: "The goal of Landlock is to enable to restrict ambient rights (e.g. global filesystem access) for a set of processes. Because Landlock is a stackable LSM [1], it makes possible to create safe security sandboxes as new security layers in addition to the existing system-wide access-controls. This kind of sandbox is expected to help mitigate the security impact of bugs or unexpected/malicious behaviors in user-space applications. Landlock empowers any process, including unprivileged ones, to securely restrict themselves. Landlock is inspired by seccomp-bpf but instead of filtering syscalls and their raw arguments, a Landlock rule can restrict the use of kernel objects like file hierarchies, according to the kernel semantic. Landlock also takes inspiration from other OS sandbox mechanisms: XNU Sandbox, FreeBSD Capsicum or OpenBSD Pledge/Unveil. In this current form, Landlock misses some access-control features. This enables to minimize this patch series and ease review. This series still addresses multiple use cases, especially with the combined use of seccomp-bpf: applications with built-in sandboxing, init systems, security sandbox tools and security-oriented APIs [2]" The cover letter and v34 posting is here: https://lore.kernel.org/linux-security-module/20210422154123.13086-1-mic@digikod.net/ See also: https://landlock.io/ This code has had extensive design discussion and review over several years" Link: https://lore.kernel.org/lkml/50db058a-7dde-441b-a7f9-f6837fe8b69f@schaufler-ca.com/ [1] Link: https://lore.kernel.org/lkml/f646e1c7-33cf-333f-070c-0a40ad0468cd@digikod.net/ [2] * tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: landlock: Enable user space to infer supported features landlock: Add user and kernel documentation samples/landlock: Add a sandbox manager example selftests/landlock: Add user space tests landlock: Add syscall implementations arch: Wire up Landlock syscalls fs,security: Add sb_delete hook landlock: Support filesystem access-control LSM: Infrastructure management of the superblock landlock: Add ptrace restrictions landlock: Set up the security framework and manage credentials landlock: Add ruleset and domain management landlock: Add object management
2021-04-29Merge tag 'net-next-5.13' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
2021-04-27Merge tag 'selinux-pr-20210426' of ↵Linus Torvalds8-48/+232
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: - Add support for measuring the SELinux state and policy capabilities using IMA. - A handful of SELinux/NFS patches to compare the SELinux state of one mount with a set of mount options. Olga goes into more detail in the patch descriptions, but this is important as it allows more flexibility when using NFS and SELinux context mounts. - Properly differentiate between the subjective and objective LSM credentials; including support for the SELinux and Smack. My clumsy attempt at a proper fix for AppArmor didn't quite pass muster so John is working on a proper AppArmor patch, in the meantime this set of patches shouldn't change the behavior of AppArmor in any way. This change explains the bulk of the diffstat beyond security/. - Fix a problem where we were not properly terminating the permission list for two SELinux object classes. * tag 'selinux-pr-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: add proper NULL termination to the secclass_map permissions smack: differentiate between subjective and objective task credentials selinux: clarify task subjective and objective credentials lsm: separate security_task_getsecid() into subjective and objective variants nfs: account for selinux security context when deciding to share superblock nfs: remove unneeded null check in nfs_fill_super() lsm,selinux: add new hook to compare new mount to an existing mount selinux: fix misspellings using codespell tool selinux: fix misspellings using codespell tool selinux: measure state and policy capabilities selinux: Allow context mounts for unpriviliged overlayfs
2021-04-22LSM: Infrastructure management of the superblockCasey Schaufler3-37/+30
Move management of the superblock->sb_security blob out of the individual security modules and into the security infrastructure. Instead of allocating the blobs from within the modules, the modules tell the infrastructure how much space is required, and the space is allocated there. Cc: John Johansen <john.johansen@canonical.com> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com> Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Serge Hallyn <serge@hallyn.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210422154123.13086-6-mic@digikod.net Signed-off-by: James Morris <jamorris@linux.microsoft.com>
2021-04-22selinux: add proper NULL termination to the secclass_map permissionsPaul Moore1-2/+3
This patch adds the missing NULL termination to the "bpf" and "perf_event" object class permission lists. This missing NULL termination should really only affect the tools under scripts/selinux, with the most important being genheaders.c, although in practice this has not been an issue on any of my dev/test systems. If the problem were to manifest itself it would likely result in bogus permissions added to the end of the object class; thankfully with no access control checks using these bogus permissions and no policies defining these permissions the impact would likely be limited to some noise about undefined permissions during policy load. Cc: stable@vger.kernel.org Fixes: ec27c3568a34 ("selinux: bpf: Add selinux check for eBPF syscall operations") Fixes: da97e18458fb ("perf_event: Add support for LSM and SELinux checks") Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski6-112/+185
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-09Merge tag 'selinux-pr-20210409' of ↵Linus Torvalds6-112/+185
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux fixes from Paul Moore: "Three SELinux fixes. These fix known problems relating to (re)loading SELinux policy or changing the policy booleans, and pass our test suite without problem" * tag 'selinux-pr-20210409' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix race between old and new sidtab selinux: fix cond_list corruption when changing booleans selinux: make nslot handling in avtab more robust
2021-04-08selinux: fix race between old and new sidtabOndrej Mosnacek3-37/+145
Since commit 1b8b31a2e612 ("selinux: convert policy read-write lock to RCU"), there is a small window during policy load where the new policy pointer has already been installed, but some threads may still be holding the old policy pointer in their read-side RCU critical sections. This means that there may be conflicting attempts to add a new SID entry to both tables via sidtab_context_to_sid(). See also (and the rest of the thread): https://lore.kernel.org/selinux/CAFqZXNvfux46_f8gnvVvRYMKoes24nwm2n3sPbMjrB8vKTW00g@mail.gmail.com/ Fix this by installing the new policy pointer under the old sidtab's spinlock along with marking the old sidtab as "frozen". Then, if an attempt to add new entry to a "frozen" sidtab is detected, make sidtab_context_to_sid() return -ESTALE to indicate that a new policy has been installed and that the caller will have to abort the policy transaction and try again after re-taking the policy pointer (which is guaranteed to be a newer policy). This requires adding a retry-on-ESTALE logic to all callers of sidtab_context_to_sid(), but fortunately these are easy to determine and aren't that many. This seems to be the simplest solution for this problem, even if it looks somewhat ugly. Note that other places in the kernel (e.g. do_mknodat() in fs/namei.c) use similar stale-retry patterns, so I think it's reasonable. Cc: stable@vger.kernel.org Fixes: 1b8b31a2e612 ("selinux: convert policy read-write lock to RCU") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-04-02selinux: fix cond_list corruption when changing booleansOndrej Mosnacek3-69/+33
Currently, duplicate_policydb_cond_list() first copies the whole conditional avtab and then tries to link to the correct entries in cond_dup_av_list() using avtab_search(). However, since the conditional avtab may contain multiple entries with the same key, this approach often fails to find the right entry, potentially leading to wrong rules being activated/deactivated when booleans are changed. To fix this, instead start with an empty conditional avtab and add the individual entries one-by-one while building the new av_lists. This approach leads to the correct result, since each entry is present in the av_lists exactly once. The issue can be reproduced with Fedora policy as follows: # sesearch -s ftpd_t -t public_content_rw_t -c dir -p create -A allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True allow ftpd_t public_content_rw_t:dir { add_name create link remove_name rename reparent rmdir setattr unlink watch watch_reads write }; [ ftpd_anon_write ]:True # setsebool ftpd_anon_write=off ftpd_connect_all_unreserved=off ftpd_connect_db=off ftpd_full_access=off On fixed kernels, the sesearch output is the same after the setsebool command: # sesearch -s ftpd_t -t public_content_rw_t -c dir -p create -A allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True allow ftpd_t public_content_rw_t:dir { add_name create link remove_name rename reparent rmdir setattr unlink watch watch_reads write }; [ ftpd_anon_write ]:True While on the broken kernels, it will be different: # sesearch -s ftpd_t -t public_content_rw_t -c dir -p create -A allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True While there, also simplify the computation of nslots. This changes the nslots values for nrules 2 or 3 to just two slots instead of 4, which makes the sequence more consistent. Cc: stable@vger.kernel.org Fixes: c7c556f1e81b ("selinux: refactor changing booleans") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-04-02selinux: make nslot handling in avtab more robustOndrej Mosnacek1-10/+11
1. Make sure all fileds are initialized in avtab_init(). 2. Slightly refactor avtab_alloc() to use the above fact. 3. Use h->nslot == 0 as a sentinel in the access functions to prevent dereferencing h->htable when it's not allocated. Cc: stable@vger.kernel.org Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-41/+59
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22selinux: clarify task subjective and objective credentialsPaul Moore1-39/+73
SELinux has a function, task_sid(), which returns the task's objective credentials, but unfortunately is used in a few places where the subjective task credentials should be used. Most notably in the new security_task_getsecid_subj() LSM hook. This patch fixes this and attempts to make things more obvious by introducing a new function, task_sid_subj(), and renaming the existing task_sid() function to task_sid_obj(). This patch also adds an interesting function in task_sid_binder(). The task_sid_binder() function has a comment which hopefully describes it's reason for being, but it basically boils down to the simple fact that we can't safely access another task's subjective credentials so in the case of binder we need to stick with the objective credentials regardless. Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-22lsm: separate security_task_getsecid() into subjective and objective variantsPaul Moore1-1/+2
Of the three LSMs that implement the security_task_getsecid() LSM hook, all three LSMs provide the task's objective security credentials. This turns out to be unfortunate as most of the hook's callers seem to expect the task's subjective credentials, although a small handful of callers do correctly expect the objective credentials. This patch is the first step towards fixing the problem: it splits the existing security_task_getsecid() hook into two variants, one for the subjective creds, one for the objective creds. void security_task_getsecid_subj(struct task_struct *p, u32 *secid); void security_task_getsecid_obj(struct task_struct *p, u32 *secid); While this patch does fix all of the callers to use the correct variant, in order to keep this patch focused on the callers and to ease review, the LSMs continue to use the same implementation for both hooks. The net effect is that this patch should not change the behavior of the kernel in any way, it will be up to the latter LSM specific patches in this series to change the hook implementations and return the correct credentials. Acked-by: Mimi Zohar <zohar@linux.ibm.com> (IMA) Acked-by: Casey Schaufler <casey@schaufler-ca.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-22lsm,selinux: add new hook to compare new mount to an existing mountOlga Kornievskaia1-0/+56
Add a new hook that takes an existing super block and a new mount with new options and determines if new options confict with an existing mount or not. A filesystem can use this new hook to determine if it can share the an existing superblock with a new superblock for the new mount. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com> [PM: tweak the subject line, fix tab/space problems] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-22Merge tag 'selinux-pr-20210322' of ↵Linus Torvalds3-41/+59
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux fixes from Paul Moore: "Three SELinux patches: - Fix a problem where a local variable is used outside its associated function. Thankfully this can only be triggered by reloading the SELinux policy, which is a restricted operation for other obvious reasons. - Fix some incorrect, and inconsistent, audit and printk messages when loading the SELinux policy. All three patches are relatively minor and have been through our testing with no failures" * tag 'selinux-pr-20210322' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinuxfs: unify policy load error reporting selinux: fix variable scope issue in live sidtab conversion selinux: don't log MAC_POLICY_LOAD record on failed policy load
2021-03-19selinuxfs: unify policy load error reportingOndrej Mosnacek1-6/+3
Let's drop the pr_err()s from sel_make_policy_nodes() and just add one pr_warn_ratelimited() call to the sel_make_policy_nodes() error path in sel_write_load(). Changing from error to warning makes sense, since after 02a52c5c8c3b ("selinux: move policy commit after updating selinuxfs"), this error path no longer leads to a broken selinuxfs tree (it's just kept in the original state and policy load is aborted). I also added _ratelimited to be consistent with the other prtin in the same function (it's probably not necessary, but can't really hurt... there are likely more important error messages to be printed when filesystem entry creation starts erroring out). Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-19selinux: fix variable scope issue in live sidtab conversionOndrej Mosnacek3-33/+55
Commit 02a52c5c8c3b ("selinux: move policy commit after updating selinuxfs") moved the selinux_policy_commit() call out of security_load_policy() into sel_write_load(), which caused a subtle yet rather serious bug. The problem is that security_load_policy() passes a reference to the convert_params local variable to sidtab_convert(), which stores it in the sidtab, where it may be accessed until the policy is swapped over and RCU synchronized. Before 02a52c5c8c3b, selinux_policy_commit() was called directly from security_load_policy(), so the convert_params pointer remained valid all the way until the old sidtab was destroyed, but now that's no longer the case and calls to sidtab_context_to_sid() on the old sidtab after security_load_policy() returns may cause invalid memory accesses. This can be easily triggered using the stress test from commit ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve performance"): ``` function rand_cat() { echo $(( $RANDOM % 1024 )) } function do_work() { while true; do echo -n "system_u:system_r:kernel_t:s0:c$(rand_cat),c$(rand_cat)" \ >/sys/fs/selinux/context 2>/dev/null || true done } do_work >/dev/null & do_work >/dev/null & do_work >/dev/null & while load_policy; do echo -n .; sleep 0.1; done kill %1 kill %2 kill %3 ``` Fix this by allocating the temporary sidtab convert structures dynamically and passing them among the selinux_policy_{load,cancel,commit} functions. Fixes: 02a52c5c8c3b ("selinux: move policy commit after updating selinuxfs") Cc: stable@vger.kernel.org Tested-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> [PM: merge fuzz in security.h and services.c] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-19selinux: don't log MAC_POLICY_LOAD record on failed policy loadOndrej Mosnacek1-2/+1
If sel_make_policy_nodes() fails, we should jump to 'out', not 'out1', as the latter would incorrectly log an MAC_POLICY_LOAD audit record, even though the policy hasn't actually been reloaded. The 'out1' jump label now becomes unused and can be removed. Fixes: 02a52c5c8c3b ("selinux: move policy commit after updating selinuxfs") Cc: stable@vger.kernel.org Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-12nexthop: Add netlink defines and enumerators for resilient NH groupsIdo Schimmel1-1/+4
- RTM_NEWNEXTHOP et.al. that handle resilient groups will have a new nested attribute, NHA_RES_GROUP, whose elements are attributes NHA_RES_GROUP_*. - RTM_NEWNEXTHOPBUCKET et.al. is a suite of new messages that will currently serve only for dumping of individual buckets of resilient next hop groups. For nexthop group buckets, these messages will carry a nested attribute NHA_RES_BUCKET, whose elements are attributes NHA_RES_BUCKET_*. There are several reasons why a new suite of messages is created for nexthop buckets instead of overloading the information on the existing RTM_{NEW,DEL,GET}NEXTHOP messages. First, a nexthop group can contain a large number of nexthop buckets (4k is not unheard of). This imposes limits on the amount of information that can be encoded for each nexthop bucket given a netlink message is limited to 64k bytes. Second, while RTM_NEWNEXTHOPBUCKET is only used for notifications at this point, in the future it can be extended to provide user space with control over nexthop buckets configuration. - The new group type is NEXTHOP_GRP_TYPE_RES. Note that nexthop code is adjusted to bounce groups with that type for now. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-09selinux: fix misspellings using codespell toolXiong Zhenwu1-1/+1
A typo is f out by codespell tool in 422th line of security.h: $ codespell ./security/selinux/include/ ./security.h:422: thie ==> the, this Fix a typo found by codespell. Signed-off-by: Xiong Zhenwu <xiong.zhenwu@zte.com.cn> [PM: subject line tweaks] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-09selinux: fix misspellings using codespell toolXiong Zhenwu1-1/+1
A typo is found out by codespell tool in 16th line of hashtab.c $ codespell ./security/selinux/ss/ ./hashtab.c:16: rouding ==> rounding Fix a typo found by codespell. Signed-off-by: Xiong Zhenwu <xiong.zhenwu@zte.com.cn> [PM: subject line tweak] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-09selinux: measure state and policy capabilitiesLakshmi Ramasubramanian4-5/+96
SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-09selinux: Allow context mounts for unpriviliged overlayfsVivek Goyal1-1/+2
Now overlayfs allow unpriviliged mounts. That is root inside a non-init user namespace can mount overlayfs. This is being added in 5.11 kernel. Giuseppe tried to mount overlayfs with option "context" and it failed with error -EACCESS. $ su test $ unshare -rm $ mkdir -p lower upper work merged $ mount -t overlay -o lowerdir=lower,workdir=work,upperdir=upper,userxattr,context='system_u:object_r:container_file_t:s0' none merged This fails with -EACCESS. It works if option "-o context" is not specified. Little debugging showed that selinux_set_mnt_opts() returns -EACCESS. So this patch adds "overlay" to the list, where it is fine to specific context from non init_user_ns. Reported-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> [PM: trimmed the changelog from the description] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-24Merge tag 'idmapped-mounts-v5.12' of ↵Linus Torvalds1-9/+14
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull idmapped mounts from Christian Brauner: "This introduces idmapped mounts which has been in the making for some time. Simply put, different mounts can expose the same file or directory with different ownership. This initial implementation comes with ports for fat, ext4 and with Christoph's port for xfs with more filesystems being actively worked on by independent people and maintainers. Idmapping mounts handle a wide range of long standing use-cases. Here are just a few: - Idmapped mounts make it possible to easily share files between multiple users or multiple machines especially in complex scenarios. For example, idmapped mounts will be used in the implementation of portable home directories in systemd-homed.service(8) where they allow users to move their home directory to an external storage device and use it on multiple computers where they are assigned different uids and gids. This effectively makes it possible to assign random uids and gids at login time. - It is possible to share files from the host with unprivileged containers without having to change ownership permanently through chown(2). - It is possible to idmap a container's rootfs and without having to mangle every file. For example, Chromebooks use it to share the user's Download folder with their unprivileged containers in their Linux subsystem. - It is possible to share files between containers with non-overlapping idmappings. - Filesystem that lack a proper concept of ownership such as fat can use idmapped mounts to implement discretionary access (DAC) permission checking. - They allow users to efficiently changing ownership on a per-mount basis without having to (recursively) chown(2) all files. In contrast to chown (2) changing ownership of large sets of files is instantenous with idmapped mounts. This is especially useful when ownership of a whole root filesystem of a virtual machine or container is changed. With idmapped mounts a single syscall mount_setattr syscall will be sufficient to change the ownership of all files. - Idmapped mounts always take the current ownership into account as idmappings specify what a given uid or gid is supposed to be mapped to. This contrasts with the chown(2) syscall which cannot by itself take the current ownership of the files it changes into account. It simply changes the ownership to the specified uid and gid. This is especially problematic when recursively chown(2)ing a large set of files which is commong with the aforementioned portable home directory and container and vm scenario. - Idmapped mounts allow to change ownership locally, restricting it to specific mounts, and temporarily as the ownership changes only apply as long as the mount exists. Several userspace projects have either already put up patches and pull-requests for this feature or will do so should you decide to pull this: - systemd: In a wide variety of scenarios but especially right away in their implementation of portable home directories. https://systemd.io/HOME_DIRECTORY/ - container runtimes: containerd, runC, LXD:To share data between host and unprivileged containers, unprivileged and privileged containers, etc. The pull request for idmapped mounts support in containerd, the default Kubernetes runtime is already up for quite a while now: https://github.com/containerd/containerd/pull/4734 - The virtio-fs developers and several users have expressed interest in using this feature with virtual machines once virtio-fs is ported. - ChromeOS: Sharing host-directories with unprivileged containers. I've tightly synced with all those projects and all of those listed here have also expressed their need/desire for this feature on the mailing list. For more info on how people use this there's a bunch of talks about this too. Here's just two recent ones: https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf https://fosdem.org/2021/schedule/event/containers_idmap/ This comes with an extensive xfstests suite covering both ext4 and xfs: https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts It covers truncation, creation, opening, xattrs, vfscaps, setid execution, setgid inheritance and more both with idmapped and non-idmapped mounts. It already helped to discover an unrelated xfs setgid inheritance bug which has since been fixed in mainline. It will be sent for inclusion with the xfstests project should you decide to merge this. In order to support per-mount idmappings vfsmounts are marked with user namespaces. The idmapping of the user namespace will be used to map the ids of vfs objects when they are accessed through that mount. By default all vfsmounts are marked with the initial user namespace. The initial user namespace is used to indicate that a mount is not idmapped. All operations behave as before and this is verified in the testsuite. Based on prior discussions we want to attach the whole user namespace and not just a dedicated idmapping struct. This allows us to reuse all the helpers that already exist for dealing with idmappings instead of introducing a whole new range of helpers. In addition, if we decide in the future that we are confident enough to enable unprivileged users to setup idmapped mounts the permission checking can take into account whether the caller is privileged in the user namespace the mount is currently marked with. The user namespace the mount will be marked with can be specified by passing a file descriptor refering to the user namespace as an argument to the new mount_setattr() syscall together with the new MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern of extensibility. The following conditions must be met in order to create an idmapped mount: - The caller must currently have the CAP_SYS_ADMIN capability in the user namespace the underlying filesystem has been mounted in. - The underlying filesystem must support idmapped mounts. - The mount must not already be idmapped. This also implies that the idmapping of a mount cannot be altered once it has been idmapped. - The mount must be a detached/anonymous mount, i.e. it must have been created by calling open_tree() with the OPEN_TREE_CLONE flag and it must not already have been visible in the filesystem. The last two points guarantee easier semantics for userspace and the kernel and make the implementation significantly simpler. By default vfsmounts are marked with the initial user namespace and no behavioral or performance changes are observed. The manpage with a detailed description can be found here: https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8 In order to support idmapped mounts, filesystems need to be changed and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The patches to convert individual filesystem are not very large or complicated overall as can be seen from the included fat, ext4, and xfs ports. Patches for other filesystems are actively worked on and will be sent out separately. The xfstestsuite can be used to verify that port has been done correctly. The mount_setattr() syscall is motivated independent of the idmapped mounts patches and it's been around since July 2019. One of the most valuable features of the new mount api is the ability to perform mounts based on file descriptors only. Together with the lookup restrictions available in the openat2() RESOLVE_* flag namespace which we added in v5.6 this is the first time we are close to hardened and race-free (e.g. symlinks) mounting and path resolution. While userspace has started porting to the new mount api to mount proper filesystems and create new bind-mounts it is currently not possible to change mount options of an already existing bind mount in the new mount api since the mount_setattr() syscall is missing. With the addition of the mount_setattr() syscall we remove this last restriction and userspace can now fully port to the new mount api, covering every use-case the old mount api could. We also add the crucial ability to recursively change mount options for a whole mount tree, both removing and adding mount options at the same time. This syscall has been requested multiple times by various people and projects. There is a simple tool available at https://github.com/brauner/mount-idmapped that allows to create idmapped mounts so people can play with this patch series. I'll add support for the regular mount binary should you decide to pull this in the following weeks: Here's an example to a simple idmapped mount of another user's home directory: u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt u1001@f2-vm:/$ ls -al /home/ubuntu/ total 28 drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 . drwxr-xr-x 4 root root 4096 Oct 28 04:00 .. -rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history -rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile -rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo u1001@f2-vm:/$ ls -al /mnt/ total 28 drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 . drwxr-xr-x 29 root root 4096 Oct 28 22:01 .. -rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history -rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile -rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo u1001@f2-vm:/$ touch /mnt/my-file u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file u1001@f2-vm:/$ ls -al /mnt/my-file -rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file u1001@f2-vm:/$ ls -al /home/ubuntu/my-file -rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file u1001@f2-vm:/$ getfacl /mnt/my-file getfacl: Removing leading '/' from absolute path names # file: mnt/my-file # owner: u1001 # group: u1001 user::rw- user:u1001:rwx group::rw- mask::rwx other::r-- u1001@f2-vm:/$ getfacl /home/ubuntu/my-file getfacl: Removing leading '/' from absolute path names # file: home/ubuntu/my-file # owner: ubuntu # group: ubuntu user::rw- user:ubuntu:rwx group::rw- mask::rwx other::r--" * tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits) xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl xfs: support idmapped mounts ext4: support idmapped mounts fat: handle idmapped mounts tests: add mount_setattr() selftests fs: introduce MOUNT_ATTR_IDMAP fs: add mount_setattr() fs: add attr_flags_to_mnt_flags helper fs: split out functions to hold writers namespace: only take read lock in do_reconfigure_mnt() mount: make {lock,unlock}_mount_hash() static namespace: take lock_mount_hash() directly when changing flags nfs: do not export idmapped mounts overlayfs: do not mount on top of idmapped mounts ecryptfs: do not mount on top of idmapped mounts ima: handle idmapped mounts apparmor: handle idmapped mounts fs: make helpers idmap mount aware exec: handle idmapped mounts would_dump: handle idmapped mounts ...
2021-02-22Merge tag 'integrity-v5.12' of ↵Linus Torvalds5-10/+127
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull IMA updates from Mimi Zohar: "New is IMA support for measuring kernel critical data, as per usual based on policy. The first example measures the in memory SELinux policy. The second example measures the kernel version. In addition are four bug fixes to address memory leaks and a missing 'static' function declaration" * tag 'integrity-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: integrity: Make function integrity_add_key() static ima: Free IMA measurement buffer after kexec syscall ima: Free IMA measurement buffer on error IMA: Measure kernel version in early boot selinux: include a consumer of the new IMA critical data hook IMA: define a builtin critical data measurement policy IMA: extend critical data hook to limit the measurement based on a label IMA: limit critical data measurement based on a label IMA: add policy rule to measure critical data IMA: define a hook to measure kernel integrity critical data IMA: add support to measure buffer data hash IMA: generalize keyring specific measurement constructs evm: Fix memleak in init_desc
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 02:59:59 +0300