summaryrefslogtreecommitdiff
path: root/scripts
AgeCommit message (Collapse)AuthorFilesLines
2021-06-18recordmcount: Correct st_shndx handlingPeter Zijlstra1-5/+10
One should only use st_shndx when >SHN_UNDEF and <SHN_LORESERVE. When SHN_XINDEX, then use .symtab_shndx. Otherwise use 0. This handles the case: st_shndx >= SHN_LORESERVE && st_shndx != SHN_XINDEX. Link: https://lore.kernel.org/lkml/20210607023839.26387-1-mark-pk.tsai@mediatek.com/ Link: https://lkml.kernel.org/r/20210616154126.2794-1-mark-pk.tsai@mediatek.com Reported-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> [handle endianness of sym->st_shndx] Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-05-27kbuild: Quote OBJCOPY var to avoid a pahole call break the buildJavier Martinez Canillas2-2/+2
The ccache tool can be used to speed up cross-compilation, by calling the compiler and binutils through ccache. For example, following should work: $ export ARCH=arm64 CROSS_COMPILE="ccache aarch64-linux-gnu-" $ make M=drivers/gpu/drm/rockchip/ but pahole fails to extract the BTF info from DWARF, breaking the build: CC [M] drivers/gpu/drm/rockchip//rockchipdrm.mod.o LD [M] drivers/gpu/drm/rockchip//rockchipdrm.ko BTF [M] drivers/gpu/drm/rockchip//rockchipdrm.ko aarch64-linux-gnu-objcopy: invalid option -- 'J' Usage: aarch64-linux-gnu-objcopy [option(s)] in-file [out-file] Copies a binary file, possibly transforming it in the process ... make[1]: *** [scripts/Makefile.modpost:156: __modpost] Error 2 make: *** [Makefile:1866: modules] Error 2 this fails because OBJCOPY is set to "ccache aarch64-linux-gnu-copy" and later pahole is executed with the following command line: LLVM_OBJCOPY=$(OBJCOPY) $(PAHOLE) -J --btf_base vmlinux $@ which gets expanded to: LLVM_OBJCOPY=ccache aarch64-linux-gnu-objcopy pahole -J ... instead of: LLVM_OBJCOPY="ccache aarch64-linux-gnu-objcopy" pahole -J ... Fixes: 5f9ae91f7c0d ("kbuild: Build kernel module BTFs if BTF is enabled and pahole supports it") Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/bpf/20210526215228.3729875-1-javierm@redhat.com
2021-05-17kbuild: dummy-tools: adjust to stricter stackprotector checkMichal Kubecek1-1/+5
Commit 3fb0fdb3bbe7 ("x86/stackprotector/32: Make the canary into a regular percpu variable") modified the stackprotector check on 32-bit x86 to check if gcc supports using %fs as canary. Adjust dummy-tools gcc script to pass this new test by returning "%fs" rather than "%gs" if it detects -mstack-protector-guard-reg=fs on command line. Fixes: 3fb0fdb3bbe7 ("x86/stackprotector/32: Make the canary into a regular percpu variable") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-05-17scripts/jobserver-exec: Fix a typo ("envirnoment")Jonathan Neuschäfer1-1/+1
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-05-08Merge tag 'kbuild-v5.13-2' of ↵Linus Torvalds15-65/+85
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - Convert sh and sparc to use generic shell scripts to generate the syscall headers - refactor .gitignore files - Update kernel/config_data.gz only when the content of the .config is really changed, which avoids the unneeded re-link of vmlinux - move "remove stale files" workarounds to scripts/remove-stale-files - suppress unused-but-set-variable warnings by default for Clang as well - fix locale setting LANG=C to LC_ALL=C - improve 'make distclean' - always keep intermediate objects from scripts/link-vmlinux.sh - move IF_ENABLED out of <linux/kconfig.h> to make it self-contained - misc cleanups * tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h> kbuild: Don't remove link-vmlinux temporary files on exit/signal kbuild: remove the unneeded comments for external module builds kbuild: make distclean remove tag files in sub-directories kbuild: make distclean work against $(objtree) instead of $(srctree) kbuild: refactor modname-multi by using suffix-search kbuild: refactor fdtoverlay rule kbuild: parameterize the .o part of suffix-search arch: use cross_compiling to check whether it is a cross build or not kbuild: remove ARCH=sh64 support from top Makefile .gitignore: prefix local generated files with a slash kbuild: replace LANG=C with LC_ALL=C Makefile: Move -Wno-unused-but-set-variable out of GCC only block kbuild: add a script to remove stale generated files kbuild: update config_data.gz only when the content of .config is changed .gitignore: ignore only top-level modules.builtin .gitignore: move tags and TAGS close to other tag files kernel/.gitgnore: remove stale timeconst.h and hz.bc usr/include: refactor .gitignore genksyms: fix stale comment ...
2021-05-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds4-5/+39
Merge yet more updates from Andrew Morton: "This is everything else from -mm for this merge window. 90 patches. Subsystems affected by this patch series: mm (cleanups and slub), alpha, procfs, sysctl, misc, core-kernel, bitmap, lib, compat, checkpatch, epoll, isofs, nilfs2, hpfs, exit, fork, kexec, gcov, panic, delayacct, gdb, resource, selftests, async, initramfs, ipc, drivers/char, and spelling" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (90 commits) mm: fix typos in comments mm: fix typos in comments treewide: remove editor modelines and cruft ipc/sem.c: spelling fix fs: fat: fix spelling typo of values kernel/sys.c: fix typo kernel/up.c: fix typo kernel/user_namespace.c: fix typos kernel/umh.c: fix some spelling mistakes include/linux/pgtable.h: few spelling fixes mm/slab.c: fix spelling mistake "disired" -> "desired" scripts/spelling.txt: add "overflw" scripts/spelling.txt: Add "diabled" typo scripts/spelling.txt: add "overlfow" arm: print alloc free paths for address in registers mm/vmalloc: remove vwrite() mm: remove xlate_dev_kmem_ptr() drivers/char: remove /dev/kmem for good mm: fix some typos and code style problems ipc/sem.c: mundane typo fixes ...
2021-05-07scripts/spelling.txt: add "overflw"Drew Fustini1-0/+1
Add typo "overflw" for "overflow". This typo was found and fixed in drivers/clocksource/timer-pistachio.c. Link: https://lore.kernel.org/lkml/20210305090315.384547-1-drew@beagleboard.org/ Link: https://lkml.kernel.org/r/20210305095151.388182-1-drew@beagleboard.org Signed-off-by: Drew Fustini <drew@beagleboard.org> Suggested-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-07scripts/spelling.txt: Add "diabled" typozuoqilin1-0/+1
Increase "diabled" spelling error check. Link: https://lkml.kernel.org/r/20210304070106.2313-1-zuoqilin1@163.com Signed-off-by: zuoqilin <zuoqilin@yulong.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-07scripts/spelling.txt: add "overlfow"Drew Fustini1-0/+1
Add typo "overlfow" for "overflow". This typo was found and fixed in net/sctp/tsnmap.c. Link: https://lore.kernel.org/netdev/20210304055548.56829-1-drew@beagleboard.org/ Link: https://lkml.kernel.org/r/20210304072657.64577-1-drew@beagleboard.org Signed-off-by: Drew Fustini <drew@beagleboard.org> Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-07scripts/gdb: add lx_current support for arm64Barry Song1-0/+13
arm64 uses SP_EL0 to save the current task_struct address. While running in EL0, SP_EL0 is clobbered by userspace. So if the upper bit is not 1 (not TTBR1), the current address is invalid. This patch checks the upper bit of SP_EL0, if the upper bit is 1, lx_current() of arm64 will return the derefrence of current task. Otherwise, lx_current() will tell users they are running in userspace(EL0). While arm64 is running in EL0, it is actually pointless to print current task as the memory of kernel space is not accessible in EL0. Link: https://lkml.kernel.org/r/20210314203444.15188-3-song.bao.hua@hisilicon.com Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kieran Bingham <kbingham@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-07scripts/gdb: document lx_current is only supported by x86Barry Song1-2/+8
Patch series "scripts/gdb: clarify the platforms supporting lx_current and add arm64 support", v2. lx_current depends on per_cpu current_task variable which exists on x86 only. so it actually works on x86 only. the 1st patch documents this clearly; the 2nd patch adds support for arm64. This patch (of 2): x86 is the only architecture which has per_cpu current_task: arch$ git grep current_task | grep -i per_cpu x86/include/asm/current.h:DECLARE_PER_CPU(struct task_struct *, current_task); x86/kernel/cpu/common.c:DEFINE_PER_CPU(struct task_struct *, current_task) ____cacheline_aligned = x86/kernel/cpu/common.c:EXPORT_PER_CPU_SYMBOL(current_task); x86/kernel/cpu/common.c:DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task; x86/kernel/cpu/common.c:EXPORT_PER_CPU_SYMBOL(current_task); x86/kernel/smpboot.c: per_cpu(current_task, cpu) = idle; On other architectures, lx_current() will lead to a python exception: (gdb) p $lx_current().pid Python Exception <class 'gdb.error'> No symbol "current_task" in current context.: Error occurred in Python: No symbol "current_task" in current context. To avoid more people struggling and wasting time in other architectures, document it. Link: https://lkml.kernel.org/r/20210314203444.15188-1-song.bao.hua@hisilicon.com Link: https://lkml.kernel.org/r/20210314203444.15188-2-song.bao.hua@hisilicon.com Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-07gdb: lx-symbols: store the abspath()Johannes Berg1-1/+2
If we store the relative path, the user might later cd to a different directory, and that would break the automatic symbol resolving that happens when a module is loaded into the target kernel. Fix this by storing the abspath() of each path given, just like we already do for the cwd (os.getcwd() is absolute.) Link: https://lkml.kernel.org/r/20201217091747.bf4332cf2b35.I10ebbdb7e9b80ab1a5cddebf53d073be8232d656@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-07checkpatch: improve ALLOC_ARRAY_ARGS testChristophe JAILLET1-1/+1
The devm_ variant of 'kcalloc()' and 'kmalloc_array()' are not tested Add the corresponding check. Link: https://lkml.kernel.org/r/205fc4847972fb6779abcc8818f39c14d1b45af1.1618595794.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-07checkpatch: exclude four preprocessor sub-expressions from MACRO_ARG_REUSEVincent Mailhol1-1/+1
__must_be_array, offsetof, sizeof_field and __stringify are all preprocessor macros and do not evaluate their arguments. As such, it is safe not to warn when arguments are being reused in those four sub-expressions. Exclude those so that they can pass checkpatch. Link: https://lkml.kernel.org/r/20210407105042.25380-1-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-07checkpatch: warn when missing newline in return sysfs_emit() formatsJoe Perches1-0/+11
return sysfs_emit() uses should include a newline. Suggest adding a newline when one is missing. Add one using --fix too. Link: https://lkml.kernel.org/r/aa1819fa5faf786573df298e5e2e7d357ba7d4ad.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-06Merge tag 'riscv-for-linus-5.13-mw0' of ↵Linus Torvalds2-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for the memtest= kernel command-line argument. - Support for building the kernel with FORTIFY_SOURCE. - Support for generic clockevent broadcasts. - Support for the buildtar build target. - Some build system cleanups to pass more LLVM-friendly arguments. - Support for kprobes. - A rearranged kernel memory map, the first part of supporting sv48 systems. - Improvements to kexec, along with support for kdump and crash kernels. - An alternatives-based errata framework, along with support for handling a pair of errata that manifest on some SiFive designs (including the HiFive Unmatched). - Support for XIP. - A device tree for the Microchip PolarFire ICICLE SoC and associated dev board. ... along with a bunch of cleanups. There are already a handful of fixes on the list so there will likely be a part 2. * tag 'riscv-for-linus-5.13-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (45 commits) RISC-V: Always define XIP_FIXUP riscv: Remove 32b kernel mapping from page table dump riscv: Fix 32b kernel build with CONFIG_DEBUG_VIRTUAL=y RISC-V: Fix error code returned by riscv_hartid_to_cpuid() RISC-V: Enable Microchip PolarFire ICICLE SoC RISC-V: Initial DTS for Microchip ICICLE board dt-bindings: riscv: microchip: Add YAML documentation for the PolarFire SoC RISC-V: Add Microchip PolarFire SoC kconfig option RISC-V: enable XIP RISC-V: Add crash kernel support RISC-V: Add kdump support RISC-V: Improve init_resources() RISC-V: Add kexec support RISC-V: Add EM_RISCV to kexec UAPI header riscv: vdso: fix and clean-up Makefile riscv/mm: Use BUG_ON instead of if condition followed by BUG. riscv/kprobe: fix kernel panic when invoking sys_read traced by kprobe riscv: Set ARCH_HAS_STRICT_MODULE_RWX if MMU riscv: module: Create module allocations without exec permissions riscv: bpf: Avoid breaking W^X ...
2021-05-06Merge tag 'docs-5.13-2' of git://git.lwn.net/linuxLinus Torvalds2-1/+1
Pull documentation fixes from Jonathan Corbet: "A few late-arriving documentation fixes, including some oprofile cleanup, a kernel-doc fix, some regression-reporting updates, and the usual minor fixes" * tag 'docs-5.13-2' of git://git.lwn.net/linux: Enlisted oprofile version line removed oprofiled version output line removed from the list Removed the oprofiled version option docs: reporting-issues.rst: CC subsystem and maintainers on regressions docs: correct URL to bios and kernel developer's guide docs/core-api: Consistent code style docs/zh_CN: Adjust order and content of zh_CN/index.rst Documentation: input: joydev file corrections docs: Fix typo in Documentation/x86/x86_64/5level-paging.rst kernel-doc: Add support for __deprecated
2021-05-05kbuild: Don't remove link-vmlinux temporary files on exit/signalAndi Kleen1-14/+0
Keep them around until they are cleaned up by make clean. This uses a bit more disk space, but makes it easier to debug any problems with the kernel link process. Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-05-05kbuild: refactor modname-multi by using suffix-searchMasahiro Yamada1-1/+1
Improve the readability slightly. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-05-05kbuild: refactor fdtoverlay ruleMasahiro Yamada2-19/+16
Rename overlay-y to multi-dtb-y, which is a consistent name with multi-obj-y. Also, use multi-search to avoid code duplication. Introduce real-dtb-y, which is a consistent name with real-obj-y, to contain primitive blobs compiled from *.dts. This is used to calculate the list of *.dt.yaml files. Set -@ to base DTB without using $(eval ). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-05-05kbuild: parameterize the .o part of suffix-searchMasahiro Yamada1-8/+11
The suffix-search macro hard-codes the suffix, '.o'. Make it a parameter so that the multi-search and real-search macros can be reused for foo-dtbs syntax introduced by commit 15d16d6dadf6 ("kbuild: Add generic rule to apply fdtoverlay"). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-05-04Removed the oprofiled version optionBhaskar Chowdhury1-1/+0
Removed the oprofiled version option Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Link: https://lore.kernel.org/r/c98fa38b74bdd8ab16d35862895dac5f5a535f94.1619181632.git.unixbhaskar@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-05-03Merge tag 'trace-v5.13' of ↵Linus Torvalds1-12/+14
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "New feature: - A new "func-no-repeats" option in tracefs/options directory. When set the function tracer will detect if the current function being traced is the same as the previous one, and instead of recording it, it will keep track of the number of times that the function is repeated in a row. And when another function is recorded, it will write a new event that shows the function that repeated, the number of times it repeated and the time stamp of when the last repeated function occurred. Enhancements: - In order to implement the above "func-no-repeats" option, the ring buffer timestamp can now give the accurate timestamp of the event as it is being recorded, instead of having to record an absolute timestamp for all events. This helps the histogram code which no longer needs to waste ring buffer space. - New validation logic to make sure all trace events that access dereferenced pointers do so in a safe way, and will warn otherwise. Fixes: - No longer limit the PIDs of tasks that are recorded for "saved_cmdlines" to PID_MAX_DEFAULT (32768), as systemd now allows for a much larger range. This caused the mapping of PIDs to the task names to be dropped for all tasks with a PID greater than 32768. - Change trace_clock_global() to never block. This caused a deadlock. Clean ups: - Typos, prototype fixes, and removing of duplicate or unused code. - Better management of ftrace_page allocations" * tag 'trace-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (32 commits) tracing: Restructure trace_clock_global() to never block tracing: Map all PIDs to command lines ftrace: Reuse the output of the function tracer for func_repeats tracing: Add "func_no_repeats" option for function tracing tracing: Unify the logic for function tracing options tracing: Add method for recording "func_repeats" events tracing: Add "last_func_repeats" to struct trace_array tracing: Define new ftrace event "func_repeats" tracing: Define static void trace_print_time() ftrace: Simplify the calculation of page number for ftrace_page->records some more ftrace: Store the order of pages allocated in ftrace_page tracing: Remove unused argument from "ring_buffer_time_stamp() tracing: Remove duplicate struct declaration in trace_events.h tracing: Update create_system_filter() kernel-doc comment tracing: A minor cleanup for create_system_filter() kernel: trace: Mundane typo fixes in the file trace_events_filter.c tracing: Fix various typos in comments scripts/recordmcount.pl: Make vim and emacs indent the same scripts/recordmcount.pl: Make indent spacing consistent tracing: Add a verifier to check string pointers for trace events ...
2021-05-01.gitignore: prefix local generated files with a slashMasahiro Yamada6-18/+18
The pattern prefixed with '/' matches files in the same directory, but not ones in sub-directories. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Miguel Ojeda <ojeda@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Andra Paraschiv <andraprs@amazon.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Gabriel Krisman Bertazi <krisman@collabora.com>
2021-05-01kbuild: replace LANG=C with LC_ALL=CMasahiro Yamada4-4/+4
LANG gives a weak default to each LC_* in case it is not explicitly defined. LC_ALL, if set, overrides all other LC_* variables. LANG < LC_CTYPE, LC_COLLATE, LC_MONETARY, LC_NUMERIC, ... < LC_ALL This is why documentation such as [1] suggests to set LC_ALL in build scripts to get the deterministic result. LANG=C is not strong enough to override LC_* that may be set by end users. [1]: https://reproducible-builds.org/docs/locales/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Matthias Maennich <maennich@google.com> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> (mptcp) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-01kbuild: add a script to remove stale generated filesMasahiro Yamada1-0/+31
We maintain .gitignore and Makefiles so build artifacts are properly ignored by Git, and cleaned up by 'make clean'. However, the code is always changing; generated files are often moved to another directory, or removed when they become unnecessary. Such garbage files tend to be left over in the source tree because people usually git-pull without cleaning the tree. This is not only the noise for 'git status', but also a build issue in some cases. One solution is to remove a stale file like commit 223c24a7dba9 ("kbuild: Automatically remove stale <linux/version.h> file") did. Such workaround should be removed after a while, but we forget about that if we scatter the workaround code in random places. So, this commit adds a new script to collect cleanings of stale files. As a start point, move the code in arch/arm/boot/compressed/Makefile into this script. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-05-01genksyms: fix stale commentMasahiro Yamada1-1/+1
(shipped source) is a stale comment. Since commit 833e62245943 ("genksyms: generate lexer and parser during build instead of shipping"), there is no source file to be shipped in this directory. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-05-01kbuild: add comment about why cmd_shipped uses 'cat'Masahiro Yamada1-0/+3
cmd_shipped uses 'cat' instead of 'cp' for copying a file. The reason is explained in the commit [1], but it was in the pre-git era. $ touch a $ chmod -w a $ cp a b $ cp a b cp: cannot create regular file 'b': Permission denied Add comments so that you can see the reason without looking into the history. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=a70dba8086160449cc94c5bdaff78419b6b8e3c8 Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-30scripts: a new script for checking duplicate struct declarationWan Jiabing1-0/+53
checkdeclares: find struct declared more than once. Inspired by checkincludes.pl. This script checks for duplicate struct declares. Note that this will not take into consideration macros, so you should run this only if you know you do have real dups and do not have them under #ifdef's. You could also just review the results. [akpm@linux-foundation.org: fix usage message, grammar] Link: https://lkml.kernel.org/r/20210401110943.1010796-1-wanjiabing@vivo.com Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30scripts/spelling.txt: add entries for recent discoveriesTom Saeger1-1/+25
Add a few entries for recent spelling fixes found. Opportunistically de-dupe: exeeds||exceeds Link: https://lore.kernel.org/lkml/31acb3239b7ab8989db0c9951e8740050aef0205.1616727528.git.tom.saeger@oracle.com/ Link: https://lore.kernel.org/lkml/fa193b3c9e346ff3fc157b54802c29b25f79c402.1615597995.git.tom.saeger@oracle.com/ Link: https://lkml.kernel.org/r/4a594a9e1536b1d9e5ba57f684c1e41457dd383b.1616861645.git.tom.saeger@oracle.com Signed-off-by: Tom Saeger <tom.saeger@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Colin Ian King <colin.king@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30Merge tag 'kconfig-v5.13' of ↵Linus Torvalds24-635/+559
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - Change 'option defconfig' to the environment variable KCONFIG_DEFCONFIG_LIST - Refactor tinyconfig without using allnoconfig_y - Remove 'option allnoconfig_y' syntax - Change 'option modules' to 'modules' - Do not use /boot/config-* etc. as base config for cross-compilation - Fix a search bug in nconf - Various code cleanups * tag 'kconfig-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) kconfig: refactor .gitignore kconfig: highlight xconfig 'comment' lines with '***' kconfig: highlight gconfig 'comment' lines with '***' kconfig: gconf: remove unused code kconfig: remove unused PACKAGE definition kconfig: nconf: stop endless search loops kconfig: split menu.c out of parser.y kconfig: nconf: refactor in print_in_middle() kconfig: nconf: remove meaningless wattrset() call from show_menu() kconfig: nconf: change set_config_filename() to void function kconfig: nconf: refactor attributes setup code kconfig: nconf: remove unneeded default for menu prompt kconfig: nconf: get rid of (void) casts from wattrset() calls kconfig: nconf: fix NORMAL attributes kconfig: mconf,nconf: remove unneeded '\0' termination after snprintf() kconfig: use /boot/config-* etc. as DEFCONFIG_LIST only for native build kconfig: change sym_change_count to a boolean flag kconfig: nconf: fix core dump when searching in empty menu kconfig: lxdialog: A spello fix and a punctuation added kconfig: streamline_config.pl: Couple of typo fixes ...
2021-04-30Merge tag 'kbuild-v5.13' of ↵Linus Torvalds24-266/+405
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Evaluate $(call cc-option,...) etc. only for build targets - Add CONFIG_VMLINUX_MAP to generate .map file when linking vmlinux - Remove unnecessary --gcc-toolchains Clang flag because the --prefix flag finds the toolchains - Do not pass Clang's --prefix flag when using the integrated as - Check the assembler version in Kconfig time - Add new CONFIG options, AS_VERSION, AS_IS_GNU, AS_IS_LLVM to clean up some dependencies in Kconfig - Fix invalid Module.symvers creation when building only modules without vmlinux - Fix false-positive modpost warnings when CONFIG_TRIM_UNUSED_KSYMS is set, but there is no module to build - Refactor module installation Makefile - Support zstd for module compression - Convert alpha and ia64 to use generic shell scripts to generate the syscall headers - Add a new elfnote to indicate if the kernel was built with LTO, which will be used by pahole - Flatten the directory structure under include/config/ so CONFIG options and filenames match - Change the deb source package name from linux-$(KERNELRELEASE) to linux-upstream * tag 'kbuild-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (42 commits) kbuild: Add $(KBUILD_HOSTLDFLAGS) to 'has_libelf' test kbuild: deb-pkg: change the source package name to linux-upstream tools: do not include scripts/Kbuild.include kbuild: redo fake deps at include/config/*.h kbuild: remove TMPO from try-run MAINTAINERS: add pattern for dummy-tools kbuild: add an elfnote for whether vmlinux is built with lto ia64: syscalls: switch to generic syscallhdr.sh ia64: syscalls: switch to generic syscalltbl.sh alpha: syscalls: switch to generic syscallhdr.sh alpha: syscalls: switch to generic syscalltbl.sh sysctl: use min() helper for namecmp() kbuild: add support for zstd compressed modules kbuild: remove CONFIG_MODULE_COMPRESS kbuild: merge scripts/Makefile.modsign to scripts/Makefile.modinst kbuild: move module strip/compression code into scripts/Makefile.modinst kbuild: refactor scripts/Makefile.modinst kbuild: rename extmod-prefix to extmod_prefix kbuild: check module name conflict for external modules as well kbuild: show the target directory for depmod log ...
2021-04-29Merge tag 'net-next-5.13' of ↵Linus Torvalds2-38/+160
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
2021-04-29Merge tag 'devicetree-for-5.13' of ↵Linus Torvalds2-7/+29
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Refactor powerpc and arm64 kexec DT handling to common code. This enables IMA on arm64. - Add kbuild support for applying DT overlays at build time. The first user are the DT unittests. - Fix kerneldoc formatting and W=1 warnings in drivers/of/ - Fix handling 64-bit flag on PCI resources - Bump dtschema version required to v2021.2.1 - Enable undocumented compatible checks for dtbs_check. This allows tracking of missing binding schemas. - DT docs improvements. Regroup the DT docs and add the example schema and DT kernel ABI docs to the doc build. - Convert Broadcom Bluetooth and video-mux bindings to schema - Add QCom sm8250 Venus video codec binding schema - Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile Technologies Inc. - Cleanup of DT schema type references on common properties and standard unit properties * tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits) powerpc: If kexec_build_elf_info() fails return immediately from elf64_load() powerpc: Free fdt on error in elf64_load() of: overlay: Fix kerneldoc warning in of_overlay_remove() of: linux/of.h: fix kernel-doc warnings of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses dt-bindings: bcm4329-fmac: add optional brcm,ccode-map docs: dt: update writing-schema.rst references dt-bindings: media: venus: Add sm8250 dt schema of: base: Fix spelling issue with function param 'prop' docs: dt: Add DT API documentation of: Add missing 'Return' section in kerneldoc comments of: Fix kerneldoc output formatting docs: dt: Group DT docs into relevant sub-sections docs: dt: Make 'Devicetree' wording more consistent docs: dt: writing-schema: Include the example schema in the doc build docs: dt: writing-schema: Remove spurious indentation dt-bindings: Fix reference in submitting-patches.rst to the DT ABI doc dt-bindings: ddr: Add optional manufacturer and revision ID to LPDDR3 dt-bindings: media: video-interfaces: Drop the example devicetree: bindings: clock: Minor typo fix in the file armada3700-tbg-clock.txt ...
2021-04-28Merge tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-2/+4
Pull drm updates from Dave Airlie: "The usual lots of work all over the place. i915 has gotten some Alderlake work and prelim DG1 code, along with a major locking rework over the GEM code, and brings back the property of timing out long running jobs using a watchdog. amdgpu has some Alderbran support (new GPU), freesync HDMI support along with a lot other fixes. Outside of the drm, there is a new printf specifier added which should have all the correct acks/sobs: - printk fourcc modifier support added %p4cc Summary: core: - drm_crtc_commit_wait - atomic plane state helpers reworked for full state - dma-buf heaps API rework - edid: rework and improvements for displayid dp-mst: - better topology logging bridge: - Chipone ICN6211 - Lontium LT8912B - anx7625 regulator support panel: - fix lt9611 4k panels handling simple-kms: - add plane state helpers ttm: - debugfs support - removal of unused sysfs - ignore signaled moved fences - ioremap buffer according to mem caching i915: - Alderlake S enablement - Conversion to dma_resv_locking - Bring back watchdog timeout support - legacy ioctl cleanups - add GEM TDDO and RFC process - DG1 LMEM preparation work - intel_display.c refactoring - Gen9/TGL PCH combination support - eDP MSO Support - multiple PSR instance support - Link training debug updates - Disable PSR2 support on JSL/EHL - DDR5/LPDDR5 support for bw calcs - LSPCON limited to gen9/10 platforms - HSW/BDW async flip/VTd corruption workaround - SAGV watermark fixes - SNB hard hang on ring resume fix - Limit imported dma-buf size - move to use new tasklet API - refactor KBL/TGL/ADL-S display/gt steppings - refactoring legacy DP/HDMI, FB plane code out amdgpu: - uapi: add ioctl to query video capabilities - Iniital AMD Freesync HDMI support - Initial Adebaran support - 10bpc dithering improvements - DCN secure display support - Drop legacy IO BAR requirements - PCIE/S0ix/RAS/Prime/Reset fixes - Display ASSR support - SMU gfx busy queues for RV/PCO - Initial LTTPR display work amdkfd: - MMU notifier fixes - APU fixes radeon: - debugfs cleanps - fw error handling ifix - Flexible array cleanups msm: - big DSI phy/pll cleanup - sc7280 initial support - commong bandwidth scaling path - shrinker locking contention fixes - unpin/swap support for GEM objcets ast: - cursor plane handling reworked tegra: - don't register DP AUX channels before connectors zynqmp: - fix OOB struct padding memset gma500: - drop ttm and medfield support exynos: - request_irq cleanup function mediatek: - fine tune line time for EOTp - MT8192 dpi support - atomic crtc config updates - don't support HDMI connector creation mxsdb: - imx8mm support panfrost: - MMU IRQ handling rework qxl: - locking fixes - resource deallocation changes sun4i: - add alpha properties to UI/VI layers vc4: - RPi4 CEC support vmwgfx: - doc cleanups arc: - moved to drm/tiny" * tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm: (1390 commits) drm/ttm: Don't count pages in SG BOs against pages_limit drm/ttm: fix return value check drm/bridge: lt8912b: fix incorrect handling of of_* return values drm: bridge: fix LONTIUM use of mipi_dsi_() functions drm: bridge: fix ANX7625 use of mipi_dsi_() functions drm/amdgpu: page retire over debugfs mechanism drm/radeon: Fix a missing check bug in radeon_dp_mst_detect() drm/amd/display: Fix the Wunused-function warning drm/radeon/r600: Fix variables that are not used after assignment drm/amdgpu/smu7: fix CAC setting on TOPAZ drm/amd/display: Update DCN302 SR Exit Latency drm/amdgpu: enable ras eeprom on aldebaran drm/amdgpu: RAS harvest on driver load drm/amdgpu: add ras aldebaran ras eeprom driver drm/amd/pm: increase time out value when sending msg to SMU drm/amdgpu: add DMUB outbox event IRQ source define/complete/debug flag drm/amd/pm: add the callback to get vbios bootup values for vangogh drm/radeon: Fix size overflow drm/amdgpu: Fix size overflow drm/amdgpu: move mmhub ras_func init to ip specific file ...
2021-04-28Merge tag 'x86_core_for_v5.13' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 updates from Borislav Petkov: - Turn the stack canary into a normal __percpu variable on 32-bit which gets rid of the LAZY_GS stuff and a lot of code. - Add an insn_decode() API which all users of the instruction decoder should preferrably use. Its goal is to keep the details of the instruction decoder away from its users and simplify and streamline how one decodes insns in the kernel. Convert its users to it. - kprobes improvements and fixes - Set the maximum DIE per package variable on Hygon - Rip out the dynamic NOP selection and simplify all the machinery around selecting NOPs. Use the simplified NOPs in objtool now too. - Add Xeon Sapphire Rapids to list of CPUs that support PPIN - Simplify the retpolines by folding the entire thing into an alternative now that objtool can handle alternatives with stack ops. Then, have objtool rewrite the call to the retpoline with the alternative which then will get patched at boot time. - Document Intel uarch per models in intel-family.h - Make Sub-NUMA Clustering topology the default and Cluster-on-Die the exception on Intel. * tag 'x86_core_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) x86, sched: Treat Intel SNC topology as default, COD as exception x86/cpu: Comment Skylake server stepping too x86/cpu: Resort and comment Intel models objtool/x86: Rewrite retpoline thunk calls objtool: Skip magical retpoline .altinstr_replacement objtool: Cache instruction relocs objtool: Keep track of retpoline call sites objtool: Add elf_create_undef_symbol() objtool: Extract elf_symbol_add() objtool: Extract elf_strtab_concat() objtool: Create reloc sections implicitly objtool: Add elf_create_reloc() helper objtool: Rework the elf_rebuild_reloc_section() logic objtool: Fix static_call list generation objtool: Handle per arch retpoline naming objtool: Correctly handle retpoline thunk calls x86/retpoline: Simplify retpolines x86/alternatives: Optimize optimize_nops() x86: Add insn_decode_kernel() x86/kprobes: Move 'inline' to the beginning of the kprobe_is_ss() declaration ...
2021-04-27Merge tag 'cfi-v5.13-rc1' of ↵Linus Torvalds2-2/+19
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull CFI on arm64 support from Kees Cook: "This builds on last cycle's LTO work, and allows the arm64 kernels to be built with Clang's Control Flow Integrity feature. This feature has happily lived in Android kernels for almost 3 years[1], so I'm excited to have it ready for upstream. The wide diffstat is mainly due to the treewide fixing of mismatched list_sort prototypes. Other things in core kernel are to address various CFI corner cases. The largest code portion is the CFI runtime implementation itself (which will be shared by all architectures implementing support for CFI). The arm64 pieces are Acked by arm64 maintainers rather than coming through the arm64 tree since carrying this tree over there was going to be awkward. CFI support for x86 is still under development, but is pretty close. There are a handful of corner cases on x86 that need some improvements to Clang and objtool, but otherwise works well. Summary: - Clean up list_sort prototypes (Sami Tolvanen) - Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)" * tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: arm64: allow CONFIG_CFI_CLANG to be selected KVM: arm64: Disable CFI for nVHE arm64: ftrace: use function_nocfi for ftrace_call arm64: add __nocfi to __apply_alternatives arm64: add __nocfi to functions that jump to a physical address arm64: use function_nocfi with __pa_symbol arm64: implement function_nocfi psci: use function_nocfi for cpu_resume lkdtm: use function_nocfi treewide: Change list_sort to use const pointers bpf: disable CFI in dispatcher functions kallsyms: strip ThinLTO hashes from static functions kthread: use WARN_ON_FUNCTION_MISMATCH workqueue: use WARN_ON_FUNCTION_MISMATCH module: ensure __cfi_check alignment mm: add generic function_nocfi macro cfi: add __cficanonical add support for Clang CFI
2021-04-27kernel-doc: Add support for __deprecatedMatthew Wilcox1-0/+1
The current linux-next tree has a new error: ./Documentation/gpu/drm-mm:445: ./drivers/gpu/drm/drm_prime.c:994: WARNING: Error in declarator or parameters Invalid C declaration: Expecting "(" in parameters. [error at 17] int __deprecated drm_prime_sg_to_page_array (struct sg_table *sgt, struct page **pages, int max_entries) -----------------^ While we might consider that documenting a deprecated interface is not necessarily best practice, removing the error is easy. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lore.kernel.org/r/20210427114828.GY235567@casper.infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-26Merge tag 'docs-5.13' of git://git.lwn.net/linuxLinus Torvalds4-50/+219
Pull documentation updates from Jonathan Corbet: "It's been a relatively busy cycle in docsland, though more than usually well contained to Documentation/ itself. Highlights include: - The Chinese translators have been busy and show no signs of stopping anytime soon. Italian has also caught up. - Aditya Srivastava has been working on improvements to the kernel-doc script. - Thorsten continues his work on reporting-issues.rst and related documentation around regression reporting. - Lots of documentation updates, typo fixes, etc. as usual" * tag 'docs-5.13' of git://git.lwn.net/linux: (139 commits) docs/zh_CN: add openrisc translation to zh_CN index docs/zh_CN: add openrisc index.rst translation docs/zh_CN: add openrisc todo.rst translation docs/zh_CN: add openrisc openrisc_port.rst translation docs/zh_CN: add core api translation to zh_CN index docs/zh_CN: add core-api index.rst translation docs/zh_CN: add core-api irq index.rst translation docs/zh_CN: add core-api irq irqflags-tracing.rst translation docs/zh_CN: add core-api irq irq-domain.rst translation docs/zh_CN: add core-api irq irq-affinity.rst translation docs/zh_CN: add core-api irq concepts.rst translation docs: sphinx-pre-install: don't barf on beta Sphinx releases scripts: kernel-doc: improve parsing for kernel-doc comments syntax docs/zh_CN: two minor fixes in zh_CN/doc-guide/ Documentation: dev-tools: Add Testing Overview docs/zh_CN: add translations in zh_CN/dev-tools/gcov docs: reporting-issues: make people CC the regressions list MAINTAINERS: add regressions mailing list doc:it_IT: align Italian documentation docs/zh_CN: sync reporting-issues.rst ...
2021-04-26Merge tag 'char-misc-5.13-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of various smaller driver subsystem updates for 5.13-rc1. Major bits in here are: - habanalabs driver updates - hwtracing driver updates - interconnect driver updates - mhi driver updates - extcon driver updates - fpga driver updates - new binder features added - nvmem driver updates - phy driver updates - soundwire driver updates - smaller misc and char driver fixes and updates. - bluetooth driver bugfix that maintainer wanted to go through this tree. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits) bluetooth: eliminate the potential race condition when removing the HCI controller coresight: etm-perf: Fix define build issue when built as module phy: Revert "phy: ti: j721e-wiz: add missing of_node_put" phy: ti: j721e-wiz: Add missing include linux/slab.h phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove() stm class: Use correct UUID APIs intel_th: pci: Add Alder Lake-M support intel_th: pci: Add Rocket Lake CPU support intel_th: Consistency and off-by-one fix intel_th: Constify attribute_group structs intel_th: Constify all drvdata references stm class: Remove an unused function habanalabs/gaudi: Fix uninitialized return code rc when read size is zero greybus: es2: fix kernel-doc warnings mei: me: add Alder Lake P device id. dw-xdata-pcie: Update outdated info and improve text format dw-xdata-pcie: Fix documentation build warns fbdev: zero-fill colormap in fbcmap.c firmware: qcom-scm: Fix QCOM_SCM configuration speakup: i18n: Switch to kmemdup_nul() in spk_msg_set() ...
2021-04-26Merge tag 'keys-cve-2020-26541-v3' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull x509 dbx/mokx UEFI support from David Howells: "Here's a set of patches from Eric Snowberg[1] that add support for EFI_CERT_X509_GUID entries in the dbx and mokx UEFI tables (such entries cause matching certificates to be rejected). These are currently ignored and only the hash entries are made use of. Additionally Eric included his patches to allow such certificates to be preloaded. These patches deal with CVE-2020-26541. To quote Eric: 'This is the fifth patch series for adding support for EFI_CERT_X509_GUID entries [2]. It has been expanded to not only include dbx entries but also entries in the mokx. Additionally my series to preload these certificate [3] has also been included'" Link: https://lore.kernel.org/r/20210122181054.32635-1-eric.snowberg@oracle.com [1] Link: https://patchwork.kernel.org/project/linux-security-module/patch/20200916004927.64276-1-eric.snowberg@oracle.com/ [2] Link: https://lore.kernel.org/patchwork/cover/1315485/ [3] * tag 'keys-cve-2020-26541-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: integrity: Load mokx variables into the blacklist keyring certs: Add ability to preload revocation certs certs: Move load_system_certificate_list to a common function certs: Add EFI_CERT_X509_GUID support for dbx entries
2021-04-26riscv: Workaround mcount name prior to clang-13Nathan Chancellor1-1/+1
Prior to clang 13.0.0, the RISC-V name for the mcount symbol was "mcount", which differs from the GCC version of "_mcount", which results in the following errors: riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_level': main.c:(.text+0xe): undefined reference to `mcount' riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_start': main.c:(.text+0x4e): undefined reference to `mcount' riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_finish': main.c:(.text+0x92): undefined reference to `mcount' riscv64-linux-gnu-ld: init/main.o: in function `.LBB32_28': main.c:(.text+0x30c): undefined reference to `mcount' riscv64-linux-gnu-ld: init/main.o: in function `free_initmem': main.c:(.text+0x54c): undefined reference to `mcount' This has been corrected in https://reviews.llvm.org/D98881 but the minimum supported clang version is 10.0.1. To avoid build errors and to gain a working function tracer, adjust the name of the mcount symbol for older versions of clang in mount.S and recordmcount.pl. Link: https://github.com/ClangBuiltLinux/linux/issues/1331 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-04-26scripts/recordmcount.pl: Fix RISC-V regex for clangNathan Chancellor1-1/+1
Clang can generate R_RISCV_CALL_PLT relocations to _mcount: $ llvm-objdump -dr build/riscv/init/main.o | rg mcount 000000000000000e: R_RISCV_CALL_PLT _mcount 000000000000004e: R_RISCV_CALL_PLT _mcount After this, the __start_mcount_loc section is properly generated and function tracing still works. Link: https://github.com/ClangBuiltLinux/linux/issues/1331 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Fangrui Song <maskray@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-1/+6
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-04-23 The following pull-request contains BPF updates for your *net-next* tree. We've added 69 non-merge commits during the last 22 day(s) which contain a total of 69 files changed, 3141 insertions(+), 866 deletions(-). The main changes are: 1) Add BPF static linker support for extern resolution of global, from Andrii. 2) Refine retval for bpf_get_task_stack helper, from Dave. 3) Add a bpf_snprintf helper, from Florent. 4) A bunch of miscellaneous improvements from many developers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25kconfig: refactor .gitignoreMasahiro Yamada1-10/+3
Add '/' prefix to clarify that the generated files exist right under scripts/kconfig/, but not in any sub-directory. Replace '*conf-cfg' with '[gmnq]conf-cfg' to make it explicit, and still short enough. Use '[gmnq]conf' to combine gconf, mconf, nconf, and qconf. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-24kbuild: deb-pkg: change the source package name to linux-upstreamMasahiro Yamada1-1/+1
Change the source package name from 'linux-$(KERNELRELEASE)' to 'linux-upstream'. Initially, I tried to use 'linux' to be aligned with the Debian kernel package, but Ben suggested 'linux-upstream' so that it is clearly distinguished from distribution packages. [1] The filenames will be changed as follows: [Before] linux-5.12.0-rc3+_5.12.0-rc3+-1.dsc linux-5.12.0-rc3+_5.12.0-rc3+.orig.tar.gz linux-5.12.0-rc3+_5.12.0-rc3+-1.diff.gz [After] linux-upstream_5.12.0-rc3+-1.dsc linux-upstream_5.12.0-rc3+.orig.tar.gz linux-upstream_5.12.0-rc3+-1.diff.gz Commit 3716001bcb7f ("deb-pkg: add source package") introduced KDEB_SOURCENAME. If you are unhappy with the default name, you can override it via KDEB_SOURCENAME. [1]: https://lore.kernel.org/linux-kbuild/06ffa2a690d57f867b4bc1b42f0026917b1dd3cd.camel@decadent.org.uk/T/#m2c4afa0eca5ced5e57795b002f2dbcb05d7a4a44 Suggested-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-24kbuild: redo fake deps at include/config/*.hAlexey Dobriyan3-49/+13
Make include/config/foo/bar.h fake deps files generation simpler. * delete .h suffix those aren't header files, shorten filenames, * delete tolower() Linux filesystems can deal with both upper and lowercase filenames very well, * put everything in 1 directory Presumably 'mkdir -p' split is from dark times when filesystems handled huge directories badly, disks were round adding to seek times. x86_64 allmodconfig lists 12364 files in include/config. ../obj/include/config/ ├── 104_QUAD_8 ├── 60XX_WDT ├── 64BIT ... ├── ZSWAP_DEFAULT_ON ├── ZSWAP_ZPOOL_DEFAULT └── ZSWAP_ZPOOL_DEFAULT_ZBUD 0 directories, 12364 files Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-24kbuild: remove TMPO from try-runMasahiro Yamada1-1/+0
TMPO is only used by arch/x86/Makefile. Change arch/x86/Makefile to use $$TMPO.o and remove TMPO from scripts/Makefile.compiler. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-24kbuild: add an elfnote for whether vmlinux is built with ltoYonghong Song1-0/+2
Currently, clang LTO built vmlinux won't work with pahole. LTO introduced cross-cu dwarf tag references and broke current pahole model which handles one cu as a time. The solution is to merge all cu's as one pahole cu as in [1]. We would like to do this merging only if cross-cu dwarf references happens. The LTO build mode is a pretty good indication for that. In earlier version of this patch ([2]), clang flag -grecord-gcc-switches is proposed to add to compilation flags so pahole could detect "-flto" and then merging cu's. This will increate the binary size of 1% without LTO though. Arnaldo suggested to use a note to indicate the vmlinux is built with LTO. Such a cheap way to get whether the vmlinux is built with LTO or not helps pahole but is also useful for tracing as LTO may inline/delete/demote global functions, promote static functions, etc. So this patch added an elfnote with a new type LINUX_ELFNOTE_LTO_INFO. The owner of the note is "Linux". With gcc 8.4.1 and clang trunk, without LTO, I got $ readelf -n vmlinux Displaying notes found in: .notes Owner Data size Description ... Linux 0x00000004 func description data: 00 00 00 00 ... With "readelf -x ".notes" vmlinux", I can verify the above "func" with type code 0x101. With clang thin-LTO, I got the same as above except the following: description data: 01 00 00 00 which indicates the vmlinux is built with LTO. [1] https://lore.kernel.org/bpf/20210325065316.3121287-1-yhs@fb.com/ [2] https://lore.kernel.org/bpf/20210331001623.2778934-1-yhs@fb.com/ Suggested-by: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Signed-off-by: Yonghong Song <yhs@fb.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-rc4 (x86-64) Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-24kbuild: add support for zstd compressed modulesPiotr Gorski1-0/+6
kmod 28 supports modules compressed in zstd format so let's add this possibility to kernel. Signed-off-by: Piotr Gorski <lucjan.lucjanov@gmail.com> Reviewed-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 05:54:40 +0300