| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This reverts commit [1] in the pre-git era.
I do not know what problem happened in the script when sh != bash
because there is no commit message.
Now that this script is much simpler than it used to be, let's revert
it, and let' see. (If this turns out to be problematic, fix the code
with proper commit description.)
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=11acbbbb8a50f4de7dbe4bc1b5acc440dfe81810
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Minimize the scope of LC_ALL=C like before commit 87c94bfb8ad3 ("kbuild:
override build timestamp & version").
Give LC_ALL=C to '$LD -v' to get the consistent version output, as commit
bcbcf50f5218 ("kbuild: fix ld-version.sh to not be affected by locale")
mentioned the LD version is affected by locale.
While I was here, I merged two sed invocations.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Kbuild builds init/built-in.a twice; first during the ordinary
directory descending, second from scripts/link-vmlinux.sh.
We do this because UTS_VERSION contains the build version and the
timestamp. We cannot update it during the normal directory traversal
since we do not yet know if we need to update vmlinux. UTS_VERSION is
temporarily calculated, but omitted from the update check. Otherwise,
vmlinux would be rebuilt every time.
When Kbuild results in running link-vmlinux.sh, it increments the
version number in the .version file and takes the timestamp at that
time to really fix UTS_VERSION.
However, updating the same file twice is a footgun. To avoid nasty
timestamp issues, all build artifacts that depend on init/built-in.a
are atomically generated in link-vmlinux.sh, where some of them do not
need rebuilding.
To fix this issue, this commit changes as follows:
[1] Split UTS_VERSION out to include/generated/utsversion.h from
include/generated/compile.h
include/generated/utsversion.h is generated just before the
vmlinux link. It is generated under include/generated/ because
some decompressors (s390, x86) use UTS_VERSION.
[2] Split init_uts_ns and linux_banner out to init/version-timestamp.c
from init/version.c
init_uts_ns and linux_banner contain UTS_VERSION. During the ordinary
directory descending, they are compiled with __weak and used to
determine if vmlinux needs relinking. Just before the vmlinux link,
they are compiled without __weak to embed the real version and
timestamp.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The AWK code was added to deduplicate modules.order in case $(obj-m)
contains the same module multiple times, but it is actually unneeded
since commit b2c885549122 ("kbuild: update modules.order only when
contained modules are updated").
The list is already deduplicated before being processed by AWK because
$^ is the deduplicated list of prerequisites.
(Please note the real-prereqs macro uses $^)
Yet, modules.order will contain duplication if two different Makefiles
build the same module:
foo/Makefile:
obj-m += bar/baz.o
foo/bar/Makefile:
obj-m += baz.o
However, the parallel builds cannot properly handle this case in the
first place. So, it is better to let it fail (as already done by
scripts/modules-check.sh).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
It is unneeded to check the sha1sum every time.
Create the timestamp files to manage it.
Add '.' to clean-dirs because 'make clean' must visit ./Kbuild to
clean up the timestamp files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
My future plan is to list subdirectories in ./Kbuild. When it occurs,
$(vmlinux-alldirs) will not contain all subdirectories.
Let's hard-code the directory list until I get around to implementing
a more sophisticated way for generating a source tarball.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
When receiving some signal, GNU Make automatically deletes the target if
it has already been changed by the interrupted recipe.
If the target is possibly incomplete due to interruption, it must be
deleted so that it will be remade from scratch on the next run of make.
Otherwise, the target would remain corrupted permanently because its
timestamp had already been updated.
Thanks to this behavior of Make, you can stop the build any time by
pressing Ctrl-C, and just run 'make' to resume it.
Kbuild also relies on this feature, but it is equivalently important
for any build systems that make decisions based on timestamps (if you
want to support Ctrl-C reliably).
However, this does not always work as claimed; Make immediately dies
with Ctrl-C if its stderr goes into a pipe.
[Test Makefile]
foo:
echo hello > $@
sleep 3
echo world >> $@
[Test Result]
$ make # hit Ctrl-C
echo hello > foo
sleep 3
^Cmake: *** Deleting file 'foo'
make: *** [Makefile:3: foo] Interrupt
$ make 2>&1 | cat # hit Ctrl-C
echo hello > foo
sleep 3
^C$ # 'foo' is often left-over
The reason is because SIGINT is sent to the entire process group.
In this example, SIGINT kills 'cat', and 'make' writes the message to
the closed pipe, then dies with SIGPIPE before cleaning the target.
A typical bad scenario (as reported by [1], [2]) is to save build log
by using the 'tee' command:
$ make 2>&1 | tee log
This can be problematic for any build systems based on Make, so I hope
it will be fixed in GNU Make. The maintainer of GNU Make stated this is
a long-standing issue and difficult to fix [3]. It has not been fixed
yet as of writing.
So, we cannot rely on Make cleaning the target. We can do it by
ourselves, in signal traps.
As far as I understand, Make takes care of SIGHUP, SIGINT, SIGQUIT, and
SITERM for the target removal. I added the traps for them, and also for
SIGPIPE just in case cmd_* rule prints something to stdout or stderr
(but I did not observe an actual case where SIGPIPE was triggered).
[Note 1]
The trap handler might be worth explaining.
rm -f $@; trap - $(sig); kill -s $(sig) $$
This lets the shell kill itself by the signal it caught, so the parent
process can tell the child has exited on the signal. Generally, this is
a proper manner for handling signals, in case the calling program (like
Bash) may monitor WIFSIGNALED() and WTERMSIG() for WCE although this may
not be a big deal here because GNU Make handles SIGHUP, SIGINT, SIGQUIT
in WUE and SIGTERM in IUE.
IUE - Immediate Unconditional Exit
WUE - Wait and Unconditional Exit
WCE - Wait and Cooperative Exit
For details, see "Proper handling of SIGINT/SIGQUIT" [4].
[Note 2]
Reverting 392885ee82d3 ("kbuild: let fixdep directly write to .*.cmd
files") would directly address [1], but it only saves if_changed_dep.
As reported in [2], all commands that use redirection can potentially
leave an empty (i.e. broken) target.
[Note 3]
Another (even safer) approach might be to always write to a temporary
file, and rename it to $@ at the end of the recipe.
<command> > $(tmp-target)
mv $(tmp-target) $@
It would require a lot of Makefile changes, and result in ugly code,
so I did not take it.
[Note 4]
A little more thoughts about a pattern rule with multiple targets (or
a grouped target).
%.x %.y: %.z
<recipe>
When interrupted, GNU Make deletes both %.x and %.y, while this solution
only deletes $@. Probably, this is not a big deal. The next run of make
will execute the rule again to create $@ along with the other files.
[1]: https://lore.kernel.org/all/YLeot94yAaM4xbMY@gmail.com/
[2]: https://lore.kernel.org/all/20220510221333.2770571-1-robh@kernel.org/
[3]: https://lists.gnu.org/archive/html/help-make/2021-06/msg00001.html
[4]: https://www.cons.org/cracauer/sigint.html
Fixes: 392885ee82d3 ("kbuild: let fixdep directly write to .*.cmd files")
Reported-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
Note that only x86_64 is covered and not all features nor mitigations
are handled, but it is enough as a starting point and showcases
the basics needed to add Rust support for a new architecture.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Having most of the new files in place, we now enable Rust support
in the build system, including `Kconfig` entries related to Rust,
the Rust configuration printer and a few other bits.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Finn Behrens <me@kloenk.de>
Co-developed-by: Adam Bratschi-Kaye <ark.email@gmail.com>
Signed-off-by: Adam Bratschi-Kaye <ark.email@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Co-developed-by: Sven Van Asbroeck <thesven73@gmail.com>
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Co-developed-by: Douglas Su <d0u9.su@outlook.com>
Signed-off-by: Douglas Su <d0u9.su@outlook.com>
Co-developed-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl>
Signed-off-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl>
Co-developed-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Signed-off-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Co-developed-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Co-developed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This script is used to detect whether a kernel module is written
in Rust.
It will later be used to disable BTF generation on Rust modules as
BTF does not yet support Rust.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This script tests whether the Rust toolchain requirements are in place
to enable Rust support. It uses `min-tool-version.sh` to fetch
the version numbers.
The build system will call it to set `CONFIG_RUST_IS_AVAILABLE` in
a later patch.
It also has an option (`-v`) to explain what is missing, which is
useful to set up the development environment. This is used via
the `make rustavailable` target added in a later patch.
Reviewed-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Finn Behrens <me@kloenk.de>
Co-developed-by: Miguel Cano <macanroj@gmail.com>
Signed-off-by: Miguel Cano <macanroj@gmail.com>
Co-developed-by: Tiago Lam <tiagolam@gmail.com>
Signed-off-by: Tiago Lam <tiagolam@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This script takes care of generating the custom target specification
file for `rustc`, based on the kernel configuration.
It also serves as an example of a Rust host program.
A dummy architecture is kept in this patch so that a later patch
adds x86 support on top with as few changes as possible.
Reviewed-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The `generate_rust_analyzer.py` script generates the configuration
file (`rust-project.json`) for rust-analyzer.
rust-analyzer is a modular compiler frontend for the Rust language.
It provides an LSP server which can be used in editors such as
VS Code, Emacs or Vim.
Reviewed-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Finn Behrens <me@kloenk.de>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Recent versions of both Binutils (`c++filt`) and LLVM (`llvm-cxxfilt`)
provide Rust v0 mangling support.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Include Rust in the "source code files" category, so that
the language-independent tests are checked for Rust too,
and teach `checkpatch` about the comment style for Rust files.
This enables the malformed SPDX check, the misplaced SPDX license
tag check, the long line checks, the lines without a newline check
and the embedded filename check.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The `%pA` format specifier is only intended to be used from Rust.
`checkpatch.pl` already gives a warning for invalid specificers:
WARNING: Invalid vsprintf pointer extension '%pA'
This makes it an error and introduces an explanatory message:
ERROR: Invalid vsprintf pointer extension '%pA' - '%pA' is only intended to be used from Rust code
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Joe Perches <joe@perches.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Rust symbols can become quite long due to namespacing introduced
by modules, types, traits, generics, etc. For instance,
the following code:
pub mod my_module {
pub struct MyType;
pub struct MyGenericType<T>(T);
pub trait MyTrait {
fn my_method() -> u32;
}
impl MyTrait for MyGenericType<MyType> {
fn my_method() -> u32 {
42
}
}
}
generates a symbol of length 96 when using the upcoming v0 mangling scheme:
_RNvXNtCshGpAVYOtgW1_7example9my_moduleINtB2_13MyGenericTypeNtB2_6MyTypeENtB2_7MyTrait9my_method
At the moment, Rust symbols may reach up to 300 in length.
Setting 512 as the maximum seems like a reasonable choice to
keep some headroom.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Rust symbols can become quite long due to namespacing introduced
by modules, types, traits, generics, etc.
Increasing to 255 is not enough in some cases, therefore
introduce longer lengths to the symbol table.
In order to avoid increasing all lengths to 2 bytes (since most
of them are small, including many Rust ones), use ULEB128 to
keep smaller symbols in 1 byte, with the rest in 2 bytes.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Co-developed-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This adds a static assert to ensure `KSYM_NAME_LEN_BUFFER`
gets updated when `KSYM_NAME_LEN` changes.
The relationship used is one that keeps the new size (512+1)
close to the original buffer size (500).
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This introduces `KSYM_NAME_LEN_BUFFER` in place of the previously
hardcoded size of the input buffer.
It will also make it easier to update the size in a single place
in a later patch.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This removes one place where the `500` constant is hardcoded.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Geert Stappers <stappers@stappers.nl>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add a make target, dt_compatible_check, to extract compatible strings
from kernel sources and check if they are documented by a schema.
At least version v2022.08 of dtschema with dt-check-compatible is
required.
This check can also be run manually on specific files or directories:
scripts/dtc/dt-extract-compatibles drivers/clk/ | \
xargs dt-check-compatible -v -s Documentation/devicetree/bindings/processed-schema.json
Currently, there are about 3800 undocumented compatible strings. Most of
these are cases where the binding is not yet converted (given there
are 1900 .txt binding files remaining).
Link: https://lore.kernel.org/all/20220916012510.2718170-1-robh@kernel.org/
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
It is useful to be able to recheck dtbs files against a limited set of
DT schema files. This can be accomplished by using differnt
DT_SCHEMA_FILES argument values while rerunning make dtbs_check. However
for some reason if_changed_rule doesn't pick up the rule_dtc changes
(and doesn't retrigger the build).
Fix this by changing if_changed_rule to if_changed_dep and squashing DTC
and dt-validate into a single new command. Then if_changed_dep triggers
on DT_SCHEMA_FILES changes and reruns the build/check.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220915114422.79378-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Switch from Clang's original forward-edge control-flow integrity
implementation to -fsanitize=kcfi, which is better suited for the
kernel, as it doesn't require LTO, doesn't use a jump table that
requires altering function references, and won't break cross-module
function address equality.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220908215504.3686827-6-samitolvanen@google.com
|
|
The compiler generates __kcfi_typeid_ symbols for annotating assembly
functions with type information. These are constants that can be
referenced in assembly code and are resolved by the linker. Ignore
them in kallsyms.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220908215504.3686827-3-samitolvanen@google.com
|
|
Alexey reported that the fraction of unknown filename instances in
kallsyms grew from ~0.3% to ~10% recently; Bill and Greg tracked it down
to assembler defined symbols, which regressed as a result of:
commit b8a9092330da ("Kbuild: do not emit debug info for assembly with LLVM_IAS=1")
In that commit, I allude to restoring debug info for assembler defined
symbols in a follow up patch, but it seems I forgot to do so in
commit a66049e2cf0e ("Kbuild: make DWARF version a choice")
Link: https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=31bf18645d98b4d3d7357353be840e320649a67d
Fixes: b8a9092330da ("Kbuild: do not emit debug info for assembly with LLVM_IAS=1")
Reported-by: Alexey Alexandrov <aalexand@google.com>
Reported-by: Bill Wendling <morbo@google.com>
Reported-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Dmitrii, Fangrui, and Mashahiro note:
Before GCC 11 and Clang 12 -gsplit-dwarf implicitly uses -g2.
Fix CONFIG_DEBUG_INFO_SPLIT for gcc-11+ & clang-12+ which now need -g
specified in order for -gsplit-dwarf to work at all.
-gsplit-dwarf has been mutually exclusive with -g since support for
CONFIG_DEBUG_INFO_SPLIT was introduced in
commit 866ced950bcd ("kbuild: Support split debug info v4")
I don't think it ever needed to be.
Link: https://lore.kernel.org/lkml/20220815013317.26121-1-dmitrii.bundin.a@gmail.com/
Link: https://lore.kernel.org/lkml/CAK7LNARPAmsJD5XKAw7m_X2g7Fi-CAAsWDQiP7+ANBjkg7R7ng@mail.gmail.com/
Link: https://reviews.llvm.org/D80391
Cc: Andi Kleen <ak@linux.intel.com>
Reported-by: Dmitrii Bundin <dmitrii.bundin.a@gmail.com>
Reported-by: Fangrui Song <maskray@google.com>
Reported-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Dmitrii Bundin <dmitrii.bundin.a@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
There is nowhere calling `menu_get_root_menu` function,
so remove it.
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Remove unused imported 'os' module.
Signed-off-by: yangxingwu <xingwu.yang@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
drivers/net/ethernet/freescale/fec.h
7b15515fc1ca ("Revert "fec: Restart PPS after link state change"")
40c79ce13b03 ("net: fec: add stop mode support for imx8 platform")
https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/
drivers/pinctrl/pinctrl-ocelot.c
c297561bc98a ("pinctrl: ocelot: Fix interrupt controller")
181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration")
https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/
tools/testing/selftests/drivers/net/bonding/Makefile
bbb774d921e2 ("net: Add tests for bonding and team address list management")
152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target")
https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/
drivers/net/can/usb/gs_usb.c
5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition")
45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support")
https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We are in the process of deprecating the runtime disable mechanism,
let's not reference it in the scripts.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The latest version of grep claims that egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this by using "grep -E" instead.
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: selinux@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[PM: tweak to remove vdso reference, cleanup subj line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
When using a "FILE *" type, checkpatch considers this an error:
ERROR: need consistent spacing around '*' (ctx:WxV)
#32: FILE: f.c:8:
+static void a(FILE *const b)
^
Fix this by explicitly defining "FILE" as a common type. This is useful for
user space patches.
With this patch, we now get:
<E> <E> <_>WS( )
<E> <E> <_>IDENT(static)
<E> <V> <_>WS( )
<E> <V> <_>DECLARE(void )
<E> <T> <_>FUNC(a)
<E> <V> <V>PAREN('(')
<EV> <N> <_>DECLARE(FILE *const )
<EV> <T> <_>IDENT(b)
<EV> <V> <_>PAREN(')') -> V
<E> <V> <_>WS(
)
32 > . static void a(FILE *const b)
32 > EEVVVVVVVTTTTTVNTTTTTTTTTTTTVVV
32 > ______________________________
Link: https://lkml.kernel.org/r/20220902111923.1488671-1-mic@digikod.net
Link: https://lore.kernel.org/r/20220902111923.1488671-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kmap() and kmap_atomic() are being deprecated in favor of
kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap's pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
kmap_local_page() is safe from any context and is therefore redundant with
kmap_atomic() with the exception of any pagefault or preemption disable
requirements. However, using kmap_atomic() for these side effects makes
the code less clear. So any requirement for pagefault or preemption
disable should be made explicitly.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored.
Link: https://lkml.kernel.org/r/20220813220034.806698-1-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are cases where the IP pointer in a Code: line in an oops doesn't
point at the beginning of an instruction:
Code: 0f bd c2 e9 a0 cd b5 e4 48 0f bd c2 e9 97 cd b5 e4 0f 1f 80 00 00 00 00 \
e9 8b cd b5 e4 0f 1f 00 66 0f a3 d0 e9 7f cd b5 e4 0f 1f <80> 00 00 00 \
00 0f a3 d0 e9 70 cd b5 e4 48 0f a3 d0 e9 67 cd b5
e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8
0f 1f 80 00 00 00 00 nopl 0x0(%rax)
^^
and the current way of determining the faulting instruction line doesn't
work because disassembled instructions are counted from the IP byte to
the end and when that thing points in the middle, the trailing bytes can
be interpreted as different insns:
Code starting with the faulting instruction
===========================================
0: 80 00 00 addb $0x0,(%rax)
3: 00 00 add %al,(%rax)
whereas, this is part of
0f 1f 80 00 00 00 00 nopl 0x0(%rax)
5: 0f a3 d0 bt %edx,%eax
...
leading to:
1d: 0f 1f 00 nopl (%rax)
20: 66 0f a3 d0 bt %dx,%ax
24:* e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 <-- trapping instruction
29: 0f 1f 80 00 00 00 00 nopl 0x0(%rax)
30: 0f a3 d0 bt %edx,%eax
which is the wrong faulting instruction.
Change the way the faulting line number is determined by matching the
opcode bytes from the beginning, leading to correct output:
1d: 0f 1f 00 nopl (%rax)
20: 66 0f a3 d0 bt %dx,%ax
24: e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8
29:* 0f 1f 80 00 00 00 00 nopl 0x0(%rax) <-- trapping instruction
30: 0f a3 d0 bt %edx,%eax
While at it, make decodecode use bash as the interpreter - that thing
should be present on everything by now. It simplifies the code a lot
too.
Link: https://lkml.kernel.org/r/20220808085928.29840-1-bp@alien8.de
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove unused scripts/gcc-ld script
- Add zstd support to scripts/extract-ikconfig
- Check 'make headers' for UML
- Fix scripts/mksysmap to ignore local symbols
* tag 'kbuild-fixes-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
mksysmap: Fix the mismatch of 'L0' symbols in System.map
kbuild: disable header exports for UML in a straightforward way
scripts/extract-ikconfig: add zstd compression support
scripts: remove obsolete gcc-ld script
|
|
When System.map was generated, the kernel used mksysmap to filter the
kernel symbols, we need to filter "L0" symbols in LoongArch architecture.
$ cat System.map | grep L0
9000000000221540 t L0
The L0 symbol exists in System.map, but not in .tmp_System.map. When
"cmp -s System.map .tmp_System.map" will show "Inconsistent kallsyms
data" error message in link-vmlinux.sh script.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
drivers/net/ethernet/freescale/fec.h
7d650df99d52 ("net: fec: add pm_qos support on imx6q platform")
40c79ce13b03 ("net: fec: add stop mode support for imx8 platform")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-09-05
The following pull-request contains BPF updates for your *net-next* tree.
We've added 106 non-merge commits during the last 18 day(s) which contain
a total of 159 files changed, 5225 insertions(+), 1358 deletions(-).
There are two small merge conflicts, resolve them as follows:
1) tools/testing/selftests/bpf/DENYLIST.s390x
Commit 27e23836ce22 ("selftests/bpf: Add lru_bug to s390x deny list") in
bpf tree was needed to get BPF CI green on s390x, but it conflicted with
newly added tests on bpf-next. Resolve by adding both hunks, result:
[...]
lru_bug # prog 'printk': failed to auto-attach: -524
setget_sockopt # attach unexpected error: -524 (trampoline)
cb_refs # expected error message unexpected error: -524 (trampoline)
cgroup_hierarchical_stats # JIT does not support calling kernel function (kfunc)
htab_update # failed to attach: ERROR: strerror_r(-524)=22 (trampoline)
[...]
2) net/core/filter.c
Commit 1227c1771dd2 ("net: Fix data-races around sysctl_[rw]mem_(max|default).")
from net tree conflicts with commit 29003875bd5b ("bpf: Change bpf_setsockopt(SOL_SOCKET)
to reuse sk_setsockopt()") from bpf-next tree. Take the code as it is from
bpf-next tree, result:
[...]
if (getopt) {
if (optname == SO_BINDTODEVICE)
return -EINVAL;
return sk_getsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval),
KERNEL_SOCKPTR(optlen));
}
return sk_setsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval), *optlen);
[...]
The main changes are:
1) Add any-context BPF specific memory allocator which is useful in particular for BPF
tracing with bonus of performance equal to full prealloc, from Alexei Starovoitov.
2) Big batch to remove duplicated code from bpf_{get,set}sockopt() helpers as an effort
to reuse the existing core socket code as much as possible, from Martin KaFai Lau.
3) Extend BPF flow dissector for BPF programs to just augment the in-kernel dissector
with custom logic. In other words, allow for partial replacement, from Shmulik Ladkani.
4) Add a new cgroup iterator to BPF with different traversal options, from Hao Luo.
5) Support for BPF to collect hierarchical cgroup statistics efficiently through BPF
integration with the rstat framework, from Yosry Ahmed.
6) Support bpf_{g,s}et_retval() under more BPF cgroup hooks, from Stanislav Fomichev.
7) BPF hash table and local storages fixes under fully preemptible kernel, from Hou Tao.
8) Add various improvements to BPF selftests and libbpf for compilation with gcc BPF
backend, from James Hilliard.
9) Fix verifier helper permissions and reference state management for synchronous
callbacks, from Kumar Kartikeya Dwivedi.
10) Add support for BPF selftest's xskxceiver to also be used against real devices that
support MAC loopback, from Maciej Fijalkowski.
11) Various fixes to the bpf-helpers(7) man page generation script, from Quentin Monnet.
12) Document BPF verifier's tnum_in(tnum_range(), ...) gotchas, from Shung-Hsi Yu.
13) Various minor misc improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (106 commits)
bpf: Optimize rcu_barrier usage between hash map and bpf_mem_alloc.
bpf: Remove usage of kmem_cache from bpf_mem_cache.
bpf: Remove prealloc-only restriction for sleepable bpf programs.
bpf: Prepare bpf_mem_alloc to be used by sleepable bpf programs.
bpf: Remove tracing program restriction on map types
bpf: Convert percpu hash map to per-cpu bpf_mem_alloc.
bpf: Add percpu allocation support to bpf_mem_alloc.
bpf: Batch call_rcu callbacks instead of SLAB_TYPESAFE_BY_RCU.
bpf: Adjust low/high watermarks in bpf_mem_cache
bpf: Optimize call_rcu in non-preallocated hash map.
bpf: Optimize element count in non-preallocated hash map.
bpf: Relax the requirement to use preallocated hash maps in tracing progs.
samples/bpf: Reduce syscall overhead in map_perf_test.
selftests/bpf: Improve test coverage of test_maps
bpf: Convert hash map to bpf_mem_alloc.
bpf: Introduce any context BPF specific memory allocator.
selftest/bpf: Add test for bpf_getsockopt()
bpf: Change bpf_getsockopt(SOL_IPV6) to reuse do_ipv6_getsockopt()
bpf: Change bpf_getsockopt(SOL_IP) to reuse do_ip_getsockopt()
bpf: Change bpf_getsockopt(SOL_TCP) to reuse do_tcp_getsockopt()
...
====================
Link: https://lore.kernel.org/r/20220905161136.9150-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
-Wformat was recently re-enabled for builds with clang, then quickly
re-disabled, due to concerns stemming from the frequency of default
argument promotion related warning instances.
commit 258fafcd0683 ("Makefile.extrawarn: re-enable -Wformat for clang")
commit 21f9c8a13bb2 ("Revert "Makefile.extrawarn: re-enable -Wformat for clang"")
ISO WG14 has ratified N2562 to address default argument promotion
explicitly for printf, as part of the upcoming ISO C2X standard.
The behavior of clang was changed in clang-16 to not warn for the cited
cases in all language modes.
Add a version check, so that users of clang-16 now get the full effect
of -Wformat. For older clang versions, re-enable flags under the
-Wformat group that way users still get some useful checks related to
format strings, without noisy default argument promotion warnings. I
intentionally omitted -Wformat-y2k and -Wformat-security from being
re-enabled, which are also part of -Wformat in clang-16.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Link: https://github.com/llvm/llvm-project/issues/57102
Link: https://www.open-std.org/jtc1/sc22/wg14/www/docs/n2562.pdf
Suggested-by: Justin Stitt <jstitt007@gmail.com>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add extract-ikconfig support for kernel images compressed with zstd.
Signed-off-by: Thitat Auareesuksakul <thitat@flux.ci>
Tested-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Since commit 8564ed2b3888 ("Kbuild, lto: Add a gcc-ld script to let run gcc
as ld") in 2014, there was not specific work on this the gcc-ld script
other than treewide clean-ups.
There are no users within the kernel tree, and probably no out-of-tree
users either, and there is no dedicated maintainer in MAINTAINERS.
Delete this obsolete gcc-ld script.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The helper value is ABI as defined by enum bpf_func_id.
As bpf_helper_defs.h is used for the userpace part, it must be consistent
with this enum.
Before this change the comments order was used by the bpf_doc script in
order to set the helper values defined in the helpers file.
When adding new helpers it is very puzzling when the userspace application
breaks in weird places if the comment is inserted instead of appended -
because the generated helper ABI is incorrect and shifted.
This commit sets the helper value to the enum value.
In addition it is currently the practice to have the comments appended
and kept in the same order as the enum. As such, add an assertion
validating the comment order is consistent with enum value.
In case a different comments ordering is desired, this assertion can
be lifted.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220824181043.1601429-1-eyal.birger@gmail.com
|
|
The bpf-helpers(7) manual page shipped in the man-pages project is
generated from the documentation contained in the BPF UAPI header, in
the Linux repository, parsed by script/bpf_doc.py and then fed to
rst2man.
The man page should contain the date of last modification of the
documentation. This commit adds the relevant date when generating the
page.
Before:
$ ./scripts/bpf_doc.py helpers | rst2man | grep '\.TH'
.TH BPF-HELPERS 7 "" "Linux v5.19-14022-g30d2a4d74e11" ""
After:
$ ./scripts/bpf_doc.py helpers | rst2man | grep '\.TH'
.TH BPF-HELPERS 7 "2022-08-15" "Linux v5.19-14022-g30d2a4d74e11" ""
We get the version by using "git log" to look for the commit date of the
latest change to the section of the BPF header containing the
documentation. If the command fails, we just skip the date field. and
keep generating the page.
Reported-by: Alejandro Colomar <alx.manpages@gmail.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alejandro Colomar <alx.manpages@gmail.com>
Link: https://lore.kernel.org/bpf/20220823155327.98888-2-quentin@isovalent.com
|
|
The bpf-helpers(7) manual page shipped in the man-pages project is
generated from the documentation contained in the BPF UAPI header, in
the Linux repository, parsed by script/bpf_doc.py and then fed to
rst2man.
After a recent update of that page [0], Alejandro reported that the
linter used to validate the man pages complains about the generated
document [1]. The header for the page is supposed to contain some
attributes that we do not set correctly with the script. This commit
updates the "project and version" field. We discussed the format of
those fields in [1] and [2].
Before:
$ ./scripts/bpf_doc.py helpers | rst2man | grep '\.TH'
.TH BPF-HELPERS 7 "" "" ""
After:
$ ./scripts/bpf_doc.py helpers | rst2man | grep '\.TH'
.TH BPF-HELPERS 7 "" "Linux v5.19-14022-g30d2a4d74e11" ""
We get the version from "git describe", but if unavailable, we fall back
on "make kernelversion". If none works, for example because neither git
nore make are installed, we just set the field to "Linux" and keep
generating the page.
[0] https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/man7/bpf-helpers.7?id=19c7f78393f2b038e76099f87335ddf43a87f039
[1] https://lore.kernel.org/all/20220823084719.13613-1-quentin@isovalent.com/t/#m58a418a318642c6428e14ce9bb84eba5183b06e8
[2] https://lore.kernel.org/all/20220721110821.8240-1-alx.manpages@gmail.com/t/#m8e689a822e03f6e2530a0d6de9d128401916c5de
Reported-by: Alejandro Colomar <alx.manpages@gmail.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alejandro Colomar <alx.manpages@gmail.com>
Link: https://lore.kernel.org/bpf/20220823155327.98888-1-quentin@isovalent.com
|
|
GCC has supported asm goto since 4.5, and Clang has since version 9.0.0.
The minimum supported versions of these tools for the build according to
Documentation/process/changes.rst are 5.1 and 11.0.0 respectively.
Remove the feature detection script, Kconfig option, and clean up some
fallback code that is no longer supported.
The removed script was also testing for a GCC specific bug that was
fixed in the 4.7 release.
Also remove workarounds for bpftrace using clang older than 9.0.0, since
other BPF backend fixes are required at this point.
Link: https://lore.kernel.org/lkml/CAK7LNATSr=BXKfkdW8f-H5VT_w=xBpT2ZQcZ7rm6JfkdE+QnmA@mail.gmail.com/
Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48637
Acked-by: Borislav Petkov <bp@suse.de>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix module versioning broken on some architectures
- Make dummy-tools enable CONFIG_PPC_LONG_DOUBLE_128
- Remove -Wformat-zero-length, which has no warning instance
- Fix the order between drivers and libs in modules.order
- Fix false-positive warnings in clang-analyzer
* tag 'kbuild-fixes-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
scripts/clang-tools: Remove DeprecatedOrUnsafeBufferHandling check
kbuild: fix the modules order between drivers and libs
scripts/Makefile.extrawarn: Do not disable clang's -Wformat-zero-length
kbuild: dummy-tools: pretend we understand __LONG_DOUBLE_128__
modpost: fix module versioning when a symbol lacks valid CRC
|
|
This `clang-analyzer` check flags the use of memset(), suggesting a more
secure version of the API, such as memset_s(), which does not exist in
the kernel:
warning: Call to function 'memset' is insecure as it does not provide
security checks introduced in the C11 standard. Replace with analogous
functions that support length arguments or provides boundary checks such
as 'memset_s' in case of C11
[clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling]
Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
There are no instances of this warning in the tree across several
difference architectures and configurations. This was added by
commit 26ea6bb1fef0 ("kbuild, LLVMLinux: Supress warnings unless W=1-3")
back in 2014, where it might have been necessary, but there are no
instances of it now so stop disabling it to increase warning coverage
for clang.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
There is a test in powerpc's Kconfig which checks __LONG_DOUBLE_128__
and sets CONFIG_PPC_LONG_DOUBLE_128 if it is understood by the compiler.
We currently don't handle it, so this results in PPC_LONG_DOUBLE_128 not
being in super-config generated by dummy-tools. So take this into
account in the gcc script and preprocess __LONG_DOUBLE_128__ as "1".
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
