summaryrefslogtreecommitdiff
path: root/scripts/setlocalversion
AgeCommit message (Collapse)AuthorFilesLines
2020-09-24scripts/setlocalversion: make git describe output more reliableRasmus Villemoes1-5/+16
When building for an embedded target using Yocto, we're sometimes observing that the version string that gets built into vmlinux (and thus what uname -a reports) differs from the path under /lib/modules/ where modules get installed in the rootfs, but only in the length of the -gabc123def suffix. Hence modprobe always fails. The problem is that Yocto has the concept of "sstate" (shared state), which allows different developers/buildbots/etc. to share build artifacts, based on a hash of all the metadata that went into building that artifact - and that metadata includes all dependencies (e.g. the compiler used etc.). That normally works quite well; usually a clean build (without using any sstate cache) done by one developer ends up being binary identical to a build done on another host. However, one thing that can cause two developers to end up with different builds [and thus make one's vmlinux package incompatible with the other's kernel-dev package], which is not captured by the metadata hashing, is this `git describe`: The output of that can be affected by (1) git version: before 2.11 git defaulted to a minimum of 7, since 2.11 (git.git commit e6c587) the default is dynamic based on the number of objects in the repo (2) hence even if both run the same git version, the output can differ based on how many remotes are being tracked (or just lots of local development branches or plain old garbage) (3) and of course somebody could have a core.abbrev config setting in ~/.gitconfig So in order to avoid `uname -a` output relying on such random details of the build environment which are rather hard to ensure are consistent between developers and buildbots, make sure the abbreviated sha1 always consists of exactly 12 hex characters. That is consistent with the current rule for -stable patches, and is almost always enough to identify the head commit unambigously - in the few cases where it does not, the v5.4.3-00021- prefix would certainly nail it down. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-11-11scripts: setlocalversion: replace backquote to dollar parenthesisBhaskar Chowdhury1-11/+11
This patch replaces backquote to dollar parenthesis syntax for better readability. Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-15scripts: setlocalversion: fix a bashismRandy Dunlap1-1/+1
Fix bashism reported by checkbashisms by using only one '=': possible bashism in scripts/setlocalversion line 96 (should be 'b = a'): if [ "`hg log -r . --template '{latesttagdistance}'`" == "1" ]; then Fixes: 38b3439d84f4 ("setlocalversion: update mercurial tag parsing") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Mike Crowe <mcrowe@zipitwireless.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-05scripts/setlocalversion: clear local variable to make it work for shMasahiro Yamada1-1/+1
Geert Uytterhoeven reports a strange side-effect of commit 858805b336be ("kbuild: add $(BASH) to run scripts with bash-extension"), which inserts the contents of a localversion file in the build directory twice. [Steps to Reproduce] $ echo bar > localversion $ mkdir build $ cd build/ $ echo foo > localversion $ make -s -f ../Makefile defconfig include/config/kernel.release $ cat include/config/kernel.release 5.4.0-rc1foofoobar This comes down to the behavior change of local variables. The 'man sh' on my Ubuntu machine, where sh is an alias to dash, explains as follows: When a variable is made local, it inherits the initial value and exported and readonly flags from the variable with the same name in the surrounding scope, if there is one. Otherwise, the variable is initially unset. [Test Code] foo () { local res echo "res: $res" } res=1 foo [Result] $ sh test.sh res: 1 $ bash test.sh res: So, scripts/setlocalversion correctly works only for bash in spite of its hashbang being #!/bin/sh. Nobody had noticed it before because CONFIG_SHELL was previously set to bash almost all the time. Now that CONFIG_SHELL is set to sh, we must write portable and correct code. I gave the Fixes tag to the commit that uncovered the issue. Clear the variable 'res' in collect_files() to make it work for sh (and it also works on distributions where sh is an alias to bash). Fixes: 858805b336be ("kbuild: add $(BASH) to run scripts with bash-extension") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-11-21scripts/setlocalversion: Improve -dirty check with git-status ↵Brian Norris1-2/+10
--no-optional-locks git-diff-index does not refresh the index for you, so using it for a "-dirty" check can give misleading results. Commit 6147b1cf19651 ("scripts/setlocalversion: git: Make -dirty check more robust") tried to fix this by switching to git-status, but it overlooked the fact that git-status also writes to the .git directory of the source tree, which is definitely not kosher for an out-of-tree (O=) build. That is getting reverted. Fortunately, git-status now supports avoiding writing to the index via the --no-optional-locks flag, as of git 2.14. It still calculates an up-to-date index, but it avoids writing it out to the .git directory. So, let's retry the solution from commit 6147b1cf19651 using this new flag first, and if it fails, we assume this is an older version of git and just use the old git-diff-index method. It's hairy to get the 'grep -vq' (inverted matching) correct by stashing the output of git-status (you have to be careful about the difference betwen "empty stdin" and "blank line on stdin"), so just pipe the output directly to grep and use a regex that's good enough for both the git-status and git-diff-index version. Cc: Christian Kujau <lists@nerdbynature.de> Cc: Guenter Roeck <linux@roeck-us.net> Suggested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Tested-by: Genki Sky <sky@genki.is> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-11Revert "scripts/setlocalversion: git: Make -dirty check more robust"Guenter Roeck1-1/+1
This reverts commit 6147b1cf19651c7de297e69108b141fb30aa2349. The reverted patch results in attempted write access to the source repository, even if that repository is mounted read-only. Output from "strace git status -uno --porcelain": getcwd("/tmp/linux-test", 129) = 16 open("/tmp/linux-test/.git/index.lock", O_RDWR|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = -1 EROFS (Read-only file system) While git appears to be able to handle this situation, a monitored build environment (such as the one used for Chrome OS kernel builds) may detect it and bail out with an access violation error. On top of that, the attempted write access suggests that git _will_ write to the file even if a build output directory is specified. Users may have the reasonable expectation that the source repository remains untouched in that situation. Fixes: 6147b1cf19651 ("scripts/setlocalversion: git: Make -dirty check more robust" Cc: Genki Sky <sky@genki.is> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-31scripts/setlocalversion: git: Make -dirty check more robustGenki Sky1-1/+1
$(git diff-index) relies on the index being refreshed. This refreshing of the index used to happen, but was removed in cdf2bc632ebc ("scripts/setlocalversion on write-protected source tree", 2013-06-14) due to issues with a read-only filesystem. If the index is not refreshed, one runs into problems. E.g. as described in [0], git stores the uid in its index, so even if just the uid has changed (or git is tricked into thinking so), then we will think the tree is dirty. So as in [1], if you package linux-git with a system that uses fakeroot(1), you get a "-dirty" version. Unless you manually $(git update-index --refresh) themselves. The simplest solution seems to be $(git status --porcelain), with an additional flag saying "ignore untracked files". It seems clearer about what it does, and avoids issues regarding cached indexes and writable filesystems, but still has stable output for scripting. [0]: https://public-inbox.org/git/0190ae30-b6c8-2a8b-b1fb-fd9d84e6dfdf@oracle.com/ [1]: https://bbs.archlinux.org/viewtopic.php?id=236702 Signed-off-by: Genki Sky <sky@genki.is> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20kbuild: setlocalversion: print error to STDERRWolfram Sang1-1/+1
I tried to use 'make O=...' from an unclean source tree. This triggered the error path of setlocalversion. But by printing to STDOUT, it created a broken localversion which then caused another (unrelated) error: "4.7.0-rc2Error: kernelrelease not valid - run make prepare to update it" exceeds 64 characters After printing to STDERR, the true build error gets displayed later: /home/wsa/Kernel/linux is not clean, please run 'make mrproper' in the '/home/wsa/Kernel/linux' directory. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Michal Marek <mmarek@suse.com>
2014-01-03Fix detectition of kernel git repository in setlocalversion script [take #2]Franck Bui-Huu1-1/+2
setlocalversion script was testing the presence of .git directory in order to find out if git is used as SCM to track the current kernel project. However in some cases, .git is not a directory but can be a file: when the kernel is a git submodule part of a git super project for example. This patch just fixes this by using 'git rev-parse --show-cdup' to check that the current directory is the kernel git topdir. This has the advantage to not test and rely on git internal infrastructure directly. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-24scripts/setlocalversion on write-protected source treeChristian Kujau1-3/+0
I just stumbled across another[0] issue when scripts/setlocalversion operates on a write-protected source tree. Back then[0] the source tree was on an read-only NFS share, so "test -w" was introduced before "git update-index" was run. This time, the source tree is on read/write NFS share, but the permissions are world-readable and only a specific user (or root) can write. Thus, "test -w ." returns "0" and then runs "git update-index", producing the following message (on a dirty tree): fatal: Unable to create '/usr/local/src/linux-git/.git/index.lock': Permission denied While it says "fatal", compilation continues just fine. However, I don't think a kernel compilation should alter the source tree (or the .git directory) in any way and I don't see how removing "git update-index" could do any harm. The Mercurial and SVN routines in scripts/setlocalversion don't have any tree-modifying commands, AFAICS. So, maybe the patch below would be acceptable. [0] https://patchwork.kernel.org/patch/29718/ Signed-off-by: Christian Kujau <lists@nerdbynature.de> Cc: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-02-22kbuild: Unset language specific variables in setlocalversion scriptChristophe Leroy1-1/+1
This patch allows the use of setlocalversion script regardless of the language parameters. Otherwise, the `svn info 2>/dev/null | grep '^Last Changed Rev'` returns nothing because for instance, in French the text 'Last Changed Rev' is replaced by 'Révision de la dernière modification' Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-03-27setlocalversion: Use "grep -q" instead of piping output to "read dummy"Roland Dreier1-2/+1
In some circumstances (eg when running a build in an emacs shell buffer), I get a spew of messages like grep: writing output: Broken pipe from setlocalversion, because the "read" subshell apparently exits as soon as it reads one line and gives EPIPE to grep. It's not clear to me why this way of writing the check was used instead of just using grep -q to suppress output, but unless there is some deep reason I don't know, this way looks cleaner to me anyway, and gets rid of the ugly message spew. (I double checked at http://pubs.opengroup.org/onlinepubs/009604499/utilities/grep.html and "grep -q" is specified in POSIX / SuS, so hopefully even people cross-compiling the kernel on some bizarre host OS can't complain about this change) Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-01-15setlocalversion: update mercurial tag parsingMike Crowe1-5/+9
The tag output of hg doesn't quite match what setlocalversion currently expects, so update it to handle the latest format. Signed-off-by: Mike Crowe <mcrowe@zipitwireless.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-10-29Merge branch 'kbuild' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: initramfs: Fix build break on symbol-prefixed archs initramfs: fix initramfs size calculation initramfs: generalize initramfs_data.xxx.S variants scripts/kallsyms: Enable error messages while hush up unnecessary warnings scripts/setlocalversion: update comment kbuild: Use a single clean rule for kernel and external modules kbuild: Do not run make clean in $(srctree) scripts/mod/modpost.c: fix commentary accordingly to last changes kbuild: Really don't clean bounds.h and asm-offsets.h
2010-09-06scripts/setlocalversion: update commentMichael Prokop1-2/+4
A tagged repository state isn't enough, git describe only looks at signed or annotated tags (git tag -a/-s). This documentation update makes sure the comment matches the current behaviour. Signed-off-by: Michael Prokop <mika@grml.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-21setlocalversion: Ignote SCMs above the linux source treeMichal Marek1-2/+2
Dan McGee <dpmcgee@gmail.com> writes: > Note that when in git, you get the appended "+" sign. If > LOCALVERSION_AUTO is set, you will get something like > "eee-gb01b08c-dirty" (whereas the copy of the tree in /tmp still > returns "eee"). It doesn't matter whether the working tree is dirty or > clean. > > Is there a way to disable this? I'm building from a clean tarball that > just happens to be unpacked inside a git repository. One would think > setting LOCALVERSION_AUTO to false would do it, but no such luck... Fix this by checking if the kernel source tree is the root of the git or hg repository. No fix for svn: If the kernel source is not tracked in the svn repository, it works as expected, otherwise determining the 'repository root' is not really a defined task. Reported-and-tested-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-13setlocalversion: fix version for untaged nontip mercurial revsMilton Miller1-1/+1
The manpage for cut says it will return all lines without the delimiter unless -s is specified. When I backed up my mecurial tree to generate modules, I found that the scm part of localversion was turning up blank. Signed-off-by: Milton Miller <miltonm@bga.com> Cc: Michal Marek <mmarek@suse.cz> Cc: "Michał Górny" <gentoo@mgorny.alt.pl> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-21kbuild: Fix make rpmMichal Marek1-3/+6
make rpm was broken by commit 0915512: make clean set -e; cd ..; ln -sf /usr/src/iwlwifi-2.6 kernel-2.6.35rc4wl /bin/sh /usr/src/iwlwifi-2.6/scripts/setlocalversion --scm-only > /usr/src/iwlwifi-2.6/.scmversion cat: .scmversion: input file is output file make[1]: *** [rpm] Error 1 Reported-and-tested-by: "Zheng, Jiajia" <jiajia.zheng@intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-20kbuild: Make the setlocalversion script POSIX-compliantMichał Górny1-3/+4
The 'source' builtin is a bash alias to the '.' (dot) builtin. While the former is supported only by bash, the latter is specified in POSIX and works fine with all POSIX-compliant shells I am aware of. The '$_' special parameter is specific to bash. It is partially supported in dash too but it always evaluates to the current script path (which causes the script to enter a loop recursively re-executing itself). This is why I have replaced the two occurences of '$_' with the explicit parameter. The 'local' builtin is another example of bash-specific code. Although it is supported by all POSIX-compliant shells I am aware of, it is not part of POSIX specification and thus the code should not rely on it assigning a specific value to the local variable. Moreover, the 'posh' shell has a limited version of 'local' builtin not supporting direct variable assignments. Thus, I have broken one of the 'local' declarations down into a (non-POSIX) 'local' declaration and a plain (POSIX-compliant) variable assignment. Signed-off-by: Michał Górny <gentoo@mgorny.alt.pl> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-06-18kbuild: Clean up and speed up the localversion logicMichal Marek1-47/+132
Now that we run scripts/setlocalversion during every build, it makes sense to move all the localversion logic there. This cleans up the toplevel Makefile and also makes sure that the script is called only once in 'make prepare' (previously, it would be called every time due to a variable expansion in an ifneq statement). No user-visible change is intended, unless one runs the setlocalversion script directly. Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-06-15kbuild: fix delay in setlocalversion on readonly sourceNico Schottelius1-2/+4
Do not update index on read only media. Idea published by Christian Kujau <lists@nerdbynature.de>. Cc: Nico Schottelius <nico@ikn.schottelius.org> Cc: Christian Kujau <lists@nerdbynature.de>
2009-05-20Fix scripts/setlocalversion with tagged git commitNico Schottelius1-7/+23
Produce correct output for - tagged commit (v2.6.30-rc6) - past tagged commit (v2.6.30-rc5-299-g7c7327d) - no tag Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-01kbuild: fix scripts/setlocalversion with gitNico Schottelius1-7/+6
When using trees like wireless-testing, which have untagged tags, scripts/setlocalversion does not display any git indication for localversion. This patch fixes it: If git is available, but no usable tag is found, it uses -g${head}. It skips the detection of unanottated tags via git name-rev. Signed-off-by: Nico Schottelius <nico@ikn.schottelius.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11kbuild: use git svn instead of git-svn in setlocalversionPeter Korsgaard1-1/+1
Use the correct git <subcmd> syntax instead of the deprecated git-<subcmd>. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-02-15kbuild,setlocalversion: shorten the make time when using svnMike Frysinger1-8/+1
Don't bother doing `svn st` as it takes a retarded amount of time when the source is cold Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-04setlocalversion: add git-svn supportPeter Korsgaard1-0/+5
Print svn revision in addition to git info on git-svn repos. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-04setlocalversion: print correct subversion revisionPeter Korsgaard1-1/+1
Output svn revision of latest change, instead of repo revision as thats what we're interested in (especially when working on a branch/tag). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-10-30kbuild: tag with git revision when git describe is missingTrent Piepho1-1/+3
setlocalversion used to use an abbreviated git commit sha1 to generate the tag. This was changed in commit d882421f4e08ddf0a94245cdbe516db260aa6f41 "kbuild: change CONFIG_LOCALVERSION_AUTO to use a git-describe-ish format" to use git describe to come up with a tag. Which is nice, but git describe sometimes can't describe the revision. Commit 56b2f0706d82535fd8d85503f2dcc0be40c8e55d ("setlocalversion: do not describe if there is nothing to describe") addressed this, but there is still no tag generated. So, generate a plain abbreviated sha1 tag like setlocalversion used to when git describe comes up short. Signed-off-by: Trent Piepho <tpiepho@freescale.com> CC: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-10-30kbuild: setlocalversion: dont include svn change countMike Frysinger1-1/+1
The number of pending changes is pretty useless, so encoding it into the version is just annoying by the constant shuffle in corresponding modules. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-26setlocalversion: do not describe if there is nothing to describeSebastian Siewior1-1/+3
Jan Engelhardt wrote: > Just a note that when you run git-describe, you should probably quiten it. > > fatal: cannot describe 'bd7364a0fd5a4a2878fe4a224be1b142a4e6698e' > > This happens when tags are not present, which can happen if Linus's tree > is sent upwards again, IOW: > > machine1$ git-clone torvalds/linux-2.6.git > machine1$ git push elsewhere master > > machine2$ git-clone elsewhere:/linux > machine2$ git-describe HEAD > fatal: cannot describe that Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Acked-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-03kbuild: add svn revision information to setlocalversionBryan Wu1-0/+16
follow git and mercurial style, include uncommitted changes detect Cc: Frans Pop <elendil@planet.nl> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-29kbuild: fix false positive -dirty tag caused by make-kpkgTheodore Ts'o1-1/+2
make-kpkg modifies scripts/package/Makefile and deletes scripts/package/builddeb as part of its build process. Ignore these changes so the tree isn't marked as -dirty, when it is just an artifact of make-kpkg. (make-kpkg clean restores the files to their original state, and these helper scripts won't affect the final compiled kernel in any way.) Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-29kbuild: fix scripts/setlocalversion to avoid erroneous -dirty tagTheodore Ts'o1-0/+1
If git's index file is out of date, and some files have been touched such that their timestamp doesn't what is in the index, "git diff-index HEAD" may show that a particular file is dirty, when in fact it really isn't. Running "git update-index" will update the index to avoid these false positives. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-29kbuild: change CONFIG_LOCALVERSION_AUTO to use a git-describe-ish formatTheodore Ts'o1-1/+1
Change the automatic local version to have the form -nnnnn-gSHA1SUMID, where 'nnnnn' is the number of commits since the last tag (i.e., 2.6.21-rc7). This makes it much more likely that the package names created for the kernel will look "newer" to a package manager. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-29kbuild: support mercurial in setlocalversionAron Griffis1-0/+23
This represents mercurial changesets similarly to git. For untagged revisions, append the changeset id. If there are uncommitted changes, append -dirty. For example, -hgc60016ba6237-dirty Signed-off-by: Aron Griffis <aron@hp.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-17kbuild: append -dirty for updated but uncommited changesUwe Zeisberger1-1/+1
Compare the working copy with the last commit, instead of the index. Signed-off-by: Uwe Zeisberger <zeisberg@informatik.uni-freiburg.de> Acked-by: Ryan Anderson <ryan@michonline.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-17kbuild: append git revision for all untagged commitsUwe Zeisberger1-1/+1
adds revision suffix for untagged commits that are reachable from a tag I'm bisecting and don't get the -g...... suffix. The reason is, that git name-rev --tags HEAD returns e.g. HEAD tags/v2.6.17-rc1^0~1067 which is currently good enough for setlocalversion to skip the suffix. This introduces a dependecy to grep -E, which should be fine. Signed-off-by: Uwe Zeisberger <zeisberg@informatik.uni-freiburg.de> Acked-By: Ryan Anderson <ryan@michonline.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-01-08kbuild: In setlocalversion change -git_dirty to just -dirtyRyan Anderson1-1/+1
When building Debian packages directly from the git tree, the appended "git_dirty" is a problem due to the underscore. In order to cause the least problems, change that just to "dirty". Signed-off-by: Ryan Anderson <ryan@michonline.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-01-06kbuild: Use git in scripts/setlocalversionRene Scharfe1-51/+17
Currently scripts/setlocalversion is a Perl script that tries to figure out the current git commit ID of a repo without using git. It also imports Digest::MD5 without using it and generally is too big for the small task it does. :] And it always reports a git ID, even when the HEAD is tagged -- this is a bug. This patch replaces it with a Bourne Shell script that uses git commands to do the same. I can't come up with a scenario where someone would use a git repo and refuse to install git core at the same time, so I think it's reasonable to assume git is available. The new script also reports uncommitted changes by adding -git_dirty to the version string. Obviously you can't see from that _what_ has been changed from the last commit, so it's more of a reminder that you forgot to commit something. The script is easily extensible: simply add a check for Mercurial (or whatever) below the git check. Note: the script doesn't print a newline char anymore. That's only because it was easier to implement it that way, not a feature (or bug). 'make kernelrelease' doesn't care. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Acked-by: Ryan Anderson <ryan@michonline.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-08-10[PATCH] kbuild: automatically append a short string to the version based ↵Ryan Anderson1-0/+56
upon the git commit If CONFIG_AUTO_LOCALVERSION is set, the user is using a git-based tree, and the current HEAD is not referred to by any tags in .git/refs/tags/, append -g and the first 8 characters of the commit to the version string. This makes it easier to use git-bisect, and/or to do a daily build, without trampling on your older, working builds, or accidentally setting up conflicting sets of modules. Signed-off-by: Ryan Anderson <ryan@michonline.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>