| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Refactor code so the warning report function
does nothing else than reporting warnings.
As a side effect some other code paths were cleaned
up by this.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Introducing helpers to retreive symbol and section
names cleaned up the code a bit.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
The typical layout is now:
WARNING: vmlinux.o(.text+0x372ec): Section mismatch: reference to .devinit.text:pci_scan_one_pbm in 'psycho_scan_bus'
This is first step towards more readable warnings.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Introducing separate sections for __dev* (HOTPLUG),
__cpu* (HOTPLUG_CPU) and __mem* (MEMORY_HOTPLUG)
allows us to do a much more reliable Section mismatch
check in modpost. We are no longer dependent on the actual
configuration of for example HOTPLUG.
This has the effect that all users see much more
Section mismatch warnings than before because they
were almost all hidden when HOTPLUG was enabled.
The advantage of this is that when building a piece
of code then it is much more likely that the Section
mismatch errors are spotted and the warnings will be
felt less random of nature.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Adrian Bunk <bunk@kernel.org>
|
|
Now that match() is introduced use it consistently so
we can share the section name definitions.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Change the logic in modpost so we identify all the
bad combinations of sections that refer to other
sections.
Compared to the previous approach we are much less
dependent on knowledge of what additional sections
the tool chain uses and thus we can keep the false
positives low.
The implmentation is changed to use a table based
lookup and we now check all combinations in first
pass so we no longer need separate passes for init
and exit sections.
Tested that the same warnings are generated for
an allyesconfig build without CONFIG_HOTPLUG.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Adrian Bunk <bunk@kernel.org>
|
|
Split a too long function up in smaller bits to make
prgram logic easier to follow.
A few related changes done due to parameter
changes.
No functional changes.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
The relocation record sometimes contained an address
which was not an exactly match for a symbol.
Implment some simple logic such that if there
is a symbol within 20 bytes of the address contained
in the relocation record then print the name of this
symbol.
With this change modpost could find symbol names
for the remaining .init.text symbols in my
allyesconfig build for x86_64.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
It is very convinient to say:
scripts/mod/modpost mm/built-in.o
to check if any section mismatch errors occured
in mm/ (as an example).
Fix it so this is possible again.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
akpm complained about overly long lines in modpost.c and
when started additional style issues were fixed:
o Updated my copyright
o Removed unneeded {}
o Drop assignments in if ()
o Spaces around operators
o Break long lines
o locate * near variable not type
o Fix a format specifier for sizeof()
o Corrected placement of '{' and '}'
o spaces to tabs (but use tabs only for indention)
modpost.c is not checkpatch clean. Readability were favoured
on top of checkpatch compliance.
But checkpatch were used to find additional stuff to clean up.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
When passing an file name > 1k the stack could be overflowed.
Not really a security issue, but still better plugged.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Fix wrong format strings in modpost exposed by the previous patch.
Including one missing argument -- some random data was printed instead.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This way gcc can warn for wrong format strings
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This adds the logic to convert the virtio ids into module aliases, and
includes a modalias entry in sysfs and the env var to make probing work.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
When part of build an external module tree, modpost first reads in the
kernel's and then the external tree's Module.symvers files. From these files
it establishes a symbol => module mapping. When it later reads in each module
built and processes the symbols it finds, it discovers the symbol=>module
mapping from Module.symvers and leaves it as it is.
The problem comes with a module has been re-named or a symbol has moved from
one module to another, since the Module.symvers file was generated. modpost
does not update the symbol=>module mapping when it finds the new location of
the symbol when scanning the newly built modules. This results in the module
containing incorrect dependency information and the new Module.symvers file
written by modpost will also contain the incorrect mappings, perpetuating the
problem to the next build, and so on.
When building the out of kernel development tree for kernel subsystem, like
v4l-dvb or ALSA, deleting the external Module.symvers file before building
(which the kernel build system doesn't do and shouldn't be necessary anyway),
won't fix the problem. modpost still reads the kernel's Module.symvers, and
since we a building a kernel subsystem, it will define the same symbols as the
external modules.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (40 commits)
kbuild: introduce ccflags-y, asflags-y and ldflags-y
kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP
kbuild: enable use of AFLAGS and CFLAGS on commandline
kbuild: enable 'make AFLAGS=...' to add additional options to AS
kbuild: fix AFLAGS use in h8300 and m68knommu
kbuild: check for wrong use of CFLAGS
kbuild: enable 'make CFLAGS=...' to add additional options to CC
kbuild: fix up CFLAGS usage
kbuild: make modpost detect unterminated device id lists
kbuild: call export_report from the Makefile
kbuild: move Kai Germaschewski to CREDITS
kconfig/menuconfig: distinguish between selected-by-another options and comments
kconfig: tristate choices with mixed tristate and boolean values
include/linux/Kbuild: remove duplicate entries
kbuild: kill backward compatibility checks
kbuild: kill EXTRA_ARFLAGS
kbuild: fix documentation in makefiles.txt
kbuild: call make once for all targets when O=.. is used
kbuild: pass -g to assembler under CONFIG_DEBUG_INFO
kbuild: update _shipped files for kconfig syntax cleanup
...
Fix up conflicts in arch/um/sys-{x86_64,i386}/Makefile manually.
|
|
I2C devices do not have any form of ID as PCI or USB devices have.
No driver uses "MODULE_DEVICE_TABLE(i2c, ...)" because it doesn't
make sense. So we can get rid of struct i2c_device_id and the
associated support code.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Greg KH <greg@kroah.com>
|
|
Cause modpost to fail if any device id lists are incorrectly terminated,
after reporting the offender.
Improved reporting by akpm
Signed-off-by: Kees Cook <kees@ubuntu.com>
Cc: Greg KH <greg@kroah.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Ben Collins <bcollins@ubuntu.com>
Cc: Michael Wu <flamingice@sourmilk.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Fix modpost segfault.
Before:
-------
ynezz@ntbk:~/linux-2.6.git$ scripts/mod/modpost vmlinux ath_pci.o
Segmentation fault
After:
------
ynezz@ntbk:~/linux-2.6.git$ scripts/mod/modpost vmlinux ath_pci.o
FATAL: section header offset=815726848 in file 'ath_pci.o' is bigger then filesize=153968
Sam: This seems to warn for a binutils issue. Anyway modpost should not
segfault.
Signed-off-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
The Elfnn_Section is not available on all platforms,
noteworthy are cygwin.
Use the safe replacement _Half.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (867 commits)
[SKY2]: status polling loop (post merge)
[NET]: Fix NAPI completion handling in some drivers.
[TCP]: Limit processing lost_retrans loop to work-to-do cases
[TCP]: Fix lost_retrans loop vs fastpath problems
[TCP]: No need to re-count fackets_out/sacked_out at RTO
[TCP]: Extract tcp_match_queue_to_sack from sacktag code
[TCP]: Kill almost unused variable pcount from sacktag
[TCP]: Fix mark_head_lost to ignore R-bit when trying to mark L
[TCP]: Add bytes_acked (ABC) clearing to FRTO too
[IPv6]: Update setsockopt(IPV6_MULTICAST_IF) to support RFC 3493, try2
[NETFILTER]: x_tables: add missing ip6t_modulename aliases
[NETFILTER]: nf_conntrack_tcp: fix connection reopening
[QETH]: fix qeth_main.c
[NETLINK]: fib_frontend build fixes
[IPv6]: Export userland ND options through netlink (RDNSS support)
[9P]: build fix with !CONFIG_SYSCTL
[NET]: Fix dev_put() and dev_hold() comments
[NET]: make netlink user -> kernel interface synchronious
[NET]: unify netlink kernel socket recognition
[NET]: cleanup 3rd argument in netlink_sendskb
...
Fix up conflicts manually in Documentation/feature-removal-schedule.txt
and my new least favourite crap, the "mod_devicetable" support in the
files include/linux/mod_devicetable.h and scripts/mod/file2alias.c.
(The latter files seem to be explicitly _designed_ to get conflicts when
different subsystems work with them - that have an absolutely horrid
lack of subsystem separation!)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With the net namespaces many code leaved the __init section,
thus making the kernel occupy more memory than it did before.
Since we have a config option that prohibits the namespace
creation, the functions that initialize/finalize some netns
stuff are simply not needed and can be freed after the boot.
Currently, this is almost not noticeable, since few calls
are no longer in __init, but when the namespaces will be
merged it will be possible to free more code. I propose to
use the __net_init, __net_exit and __net_initdata "attributes"
for functions/variables that are not used if the CONFIG_NET_NS
is not set to save more space in memory.
The exiting functions cannot just reside in the __exit section,
as noticed by David, since the init section will have
references on it and the compilation will fail due to modpost
checks. These references can exist, since the init namespace
never dies and the exit callbacks are never called. So I
introduce the __exit_refok attribute just like it is already
done with the __init_refok.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SSB is an SoC bus used in a number of embedded devices. The most
well-known of these devices is probably the Linksys WRT54G, but there
are others as well. The bus is also used internally on the BCM43xx
and BCM44xx devices from Broadcom.
This patch also includes support for SSB ID tables in modules, so
that SSB drivers can be loaded automatically.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
This is needed on MIPS where the same mechanism as get_user() is used to
intercept bus error exceptions for some hardware probes. Without this
patch modpost will throw spurious warnings:
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
MODPOST vmlinux
WARNING: arch/mips/sgi-ip22/built-in.o(__dbe_table+0x0): Section mismatch: reference to .init.text:
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The Xtensa architecture places literal pools in sections separate
from the instructions. The corresponsing text sections, therefore,
reference the .literal section, and we have to suppress those
warnings.
The naming convention defines the name for a literal
section as .SECTION.literal, unless .SECTION is .text. In that case
the name is only .literal. Using strncmp() instead of strcmp()
to compare the from-section with .SECTION.init.refok in pattern 0
should not cause any regressions for other architectures.
We also need to suppress warnings for two informational
sections (.xt.lit and .xt.prop) used by the Xtensa architecture.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
In the whitelist function of modpost now use the same
check to identify init_section as in other places of modpost.
This has the effect that we now recognize sections named
.init.text.19 as init sections and we no longer warn
when we see these.
At the same time make surrounding code readable by dropping
use of temporary flags.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This is a preparational patch that just move
two functions and add one (for now unused) function.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
We already check and warn about section mismatches from vmlinux
(build as vmlinux.o) during first pass so skip the checks
during the 2nd pass where we process modules.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Modify modpost (file2alias.c) to add acpi*:XYZ0001: alias in modules.alias
like:
grep acpi /lib/modules/2.6.22-rc4-default/modules.alias
alias acpi*:SNY5001:* sony_laptop
alias acpi*:SNY6001:* sony_laptop
for e.g. the sony_laptop module.
This module matches against all ACPI devices with a HID or CID of SNY5001
or SNY6001
Export an uevent and modalias sysfs file containing the string:
[MODALIAS=]acpi:PNP0C0C:
additional CIDs are concatenated at the end.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is needed on MIPS where the same mechanism as get_user() is used to
intercept bus error exceptions for some hardware probes. Without this
patch modpost will throw spurious warnings:
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
MODPOST vmlinux
WARNING: arch/mips/sgi-ip22/built-in.o(__dbe_table+0x0): Section mismatch: reference to .init.text:
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
gcc puts data into .data.rel or .data.rel.* on some architectures (e.g.
ia64) or under certain conditions, so whatever is legal relative to
.data should also be legal for those other sections. Fixes a few
modpost warnings on ia64.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Previously we did do the check on the .o files used to link
vmlinux but that failed to find questionable references across
the .o files.
Create a dedicated vmlinux.o file used only for section mismatch checks
that uses the defualt linker script so section does not get renamed.
The vmlinux.o may later be used as part of the the final link of vmlinux
but for now it is used fo section mismatch only.
For a defconfig build this is instant but for an allyesconfig this
add two minutes to a full build (that anyways takes ~2 hours).
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
arm uses a lot of ops structures named *_timer that has legitimite
references to .init.text.
So let's add this variable to the list of variables that may reference
.init.text without causing any warning.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Replaced this with a __init_refok marker
in front of fb_find_logo().
I think that the __initdata marker for the logo's are
wrong but I have not justified this so I did not remove it.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Replace the hardcoded variable name apic_es7000 in modpost
with a __initdata_refok marker.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
The .exit.text section may be discarded either at build or at runtime.
So let modpost warn if this situation is detected.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Move more checks from whitelist to the section check functions.
Remove the redundent pci_fixup check.
Renumber the patterns.
No functional changes.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
There were a great deal of overlap between the two functions
that check which sections may reference .init.text and .exit.text.
Factor out common check to a separate function and
sort entries in the original functions.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
.note* sections are ELF notes, which are typically used by external
tools to examine the kernel image. Since this is removed from any
runtime consideration, it's OK to reference any section from a .note*
section.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
The .paravirtprobe section is obsolete, so modpost doesn't need to handle it.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
used by powerpc
We should do better here by effetively "dereferencing" references to
the .toc (or the .got2) section, but that is much harder.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
With this change we can find more symbols hereby improving
the readability of the warnings.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
On i386 and MIPS, warn_sec_mismatch() sometimes fails to show
usefull symbol name. This is because empty 'refsym' due to 0 r_addend
value. This patch is to adjust r_addend value, consulting with
apply_relocate() routine in kernel code.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
There's a special .cranges section that is almost always generated,
with data being moved to the appropriate section by the linker at a later
stage.
To give a bit of background, sh64 has both a native SHmedia instruction
set (32-bit instructions) and SHcompact (which is compatability with
normal SH -- 16-bit, a massively reduced register set, etc.). code ranges
are emitted when we're using the 32-bit ABI, but not the 64-bit one.
It is a special staging section used solely by binutils where code with
different flags get placed (more specifically differing flags for input
and output sections), before being lazily merged by the linker.
The closest I've been able to find to documentation is:
http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/ld/emultempl/sh64elf.em?rev=1.10&content-type=text/x-cvsweb-markup&cvsroot=src
It's an array of 8-byte Elf32_CRange structure given in
http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/bfd/elf32-sh64.h?rev=1.4&content-type=text/x-cvsweb-markup&cvsroot=src
that describes for which ISA a range is used.
Silence the warnings by allowing references from .init.text to .cranges.
The following warnings are fixed:
WARNING: init/built-in.o(.cranges+0x0): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0xa): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0x14): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0x1e): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0x28): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0x32): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x50): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x5a): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x64): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0xfa): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x104): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x10e): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x14a): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x154): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x15e): Section mismatch: reference to .init.text:
WARNING: mm/built-in.o(.cranges+0x6e): Section mismatch: reference to .init.text:
WARNING: mm/built-in.o(.cranges+0x78): Section mismatch: reference to .init.text:
WARNING: mm/built-in.o(.cranges+0x82): Section mismatch: reference to .init.text:
WARNING: mm/built-in.o(.cranges+0xaa): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x136): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x140): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x14a): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x168): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x1f4): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x1fe): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x302): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x30c): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x316): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x3a2): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x3ac): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x4ce): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x4d8): Section mismatch: reference to .init.text:
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Kaz Kojima <kkojima@rr.iij4u.or.jp>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This reverts commit f892b7d480eec809a5dfbd6e65742b3f3155e50e, which
totally broke the build on x86 with CONFIG_RELOCATABLE (which, as far as
I can tell, is the only case where it should even matter!) due to a
SIGSEGV in modpost.
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
modpost had two cases hardcoded for mm/
Shift over to __init_refok and kill the
hardcoded function names in modpost.
This has the drawback that the functions
will always be kept no matter configuration.
With previous code the function were placed in
init section if configuration allowed it.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Kill a special case in modpost by introducing the
__init_refok marker.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
warnings
Throughout the kernel there are a few legitimite references
to init or exit sections. Most of these are covered by the
patterns included in modpost but a few nees special attention.
To avoid hardcoding a lot of function names in modpost introduce
a marker so relevant function/data can be marked.
When modpost see a reference to a init/exit function from
a function/data marked no warning will be issued.
Idea from: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
|
