summaryrefslogtreecommitdiff
path: root/scripts/mod
AgeCommit message (Collapse)AuthorFilesLines
2021-02-24Merge tag 'char-misc-5.12-rc1' of ↵Linus Torvalds2-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc/whatever driver subsystem updates for 5.12-rc1. Over time it seems like this tree is collecting more and more tiny driver subsystems in one place, making it easier for those maintainers, which is why this is getting larger. Included in here are: - coresight driver updates - habannalabs driver updates - virtual acrn driver addition (proper acks from the x86 maintainers) - broadcom misc driver addition - speakup driver updates - soundwire driver updates - fpga driver updates - amba driver updates - mei driver updates - vfio driver updates - greybus driver updates - nvmeem driver updates - phy driver updates - mhi driver updates - interconnect driver udpates - fsl-mc bus driver updates - random driver fix - some small misc driver updates (rtsx, pvpanic, etc.) All of these have been in linux-next for a while, with the only reported issue being a merge conflict due to the dfl_device_id addition from the fpga subsystem in here" * tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits) spmi: spmi-pmic-arb: Fix hw_irq overflow Documentation: coresight: Add PID tracing description coresight: etm-perf: Support PID tracing for kernel at EL2 coresight: etm-perf: Clarify comment on perf options ACRN: update MAINTAINERS: mailing list is subscribers-only regmap: sdw-mbq: use MODULE_LICENSE("GPL") regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ regmap: sdw: use _no_pm functions in regmap_read/write soundwire: intel: fix possible crash when no device is detected MAINTAINERS: replace my with email with replacements mhi: Fix double dma free uapi: map_to_7segment: Update example in documentation uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue firewire: replace tricky statement by two simple ones vme: make remove callback return void firmware: google: make coreboot driver's remove callback return void firmware: xilinx: Use explicit values for all enum values sample/acrn: Introduce a sample of HSM ioctl interface usage virt: acrn: Introduce an interface for Service VM to control vCPU ...
2021-02-23Merge tag 'modules-for-v5.12' of ↵Linus Torvalds2-50/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: - Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These export types were introduced between 2006 - 2008. All the of the unused symbols have been long removed and gpl future symbols were converted to gpl quite a long time ago, and I don't believe these export types have been used ever since. So, I think it should be safe to retire those export types now (Christoph Hellwig) - Refactor and clean up some aged code cruft in the module loader (Christoph Hellwig) - Build {,module_}kallsyms_on_each_symbol only when livepatching is enabled, as it is the only caller (Christoph Hellwig) - Unexport find_module() and module_mutex and fix the last module callers to not rely on these anymore. Make module_mutex internal to the module loader (Christoph Hellwig) - Harden ELF checks on module load and validate ELF structures before checking the module signature (Frank van der Linden) - Fix undefined symbol warning for clang (Fangrui Song) - Fix smatch warning (Dan Carpenter) * tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: potential uninitialized return in module_kallsyms_on_each_symbol() module: remove EXPORT_UNUSED_SYMBOL* module: remove EXPORT_SYMBOL_GPL_FUTURE module: move struct symsearch to module.c module: pass struct find_symbol_args to find_symbol module: merge each_symbol_section into find_symbol module: remove each_symbol_in_section module: mark module_mutex static kallsyms: only build {,module_}kallsyms_on_each_symbol when required kallsyms: refactor {,module_}kallsyms_on_each_symbol module: use RCU to synchronize find_module module: unexport find_module and module_mutex drm: remove drm_fb_helper_modinit powerpc/powernv: remove get_cxl_module module: harden ELF info handling module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
2021-02-23Merge tag 'clang-lto-v5.12-rc1' of ↵Linus Torvalds4-10/+22
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull clang LTO updates from Kees Cook: "Clang Link Time Optimization. This is built on the work done preparing for LTO by arm64 folks, tracing folks, etc. This includes the core changes as well as the remaining pieces for arm64 (LTO has been the default build method on Android for about 3 years now, as it is the prerequisite for the Control Flow Integrity protections). While x86 LTO enablement is done, it depends on some pending objtool clean-ups. It's possible that I'll send a "part 2" pull request for LTO that includes x86 support. For merge log posterity, and as detailed in commit dc5723b02e52 ("kbuild: add support for Clang LTO"), here is the lt;dr to do an LTO build: make LLVM=1 LLVM_IAS=1 defconfig scripts/config -e LTO_CLANG_THIN make LLVM=1 LLVM_IAS=1 (To do a cross-compile of arm64, add "CROSS_COMPILE=aarch64-linux-gnu-" and "ARCH=arm64" to the "make" command lines.) Summary: - Clang LTO build infrastructure and arm64-specific enablement (Sami Tolvanen) - Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)" * tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kbuild: prevent CC_FLAGS_LTO self-bloating on recursive rebuilds arm64: allow LTO to be selected arm64: disable recordmcount with DYNAMIC_FTRACE_WITH_REGS arm64: vdso: disable LTO drivers/misc/lkdtm: disable LTO for rodata.o efi/libstub: disable LTO scripts/mod: disable LTO for empty.c modpost: lto: strip .lto from module names PCI: Fix PREL32 relocations for LTO init: lto: fix PREL32 relocations init: lto: ensure initcall ordering kbuild: lto: add a default list of used symbols kbuild: lto: merge module sections kbuild: lto: limit inlining kbuild: lto: fix module versioning kbuild: add support for Clang LTO tracing: move function tracer options to Kconfig
2021-02-08module: remove EXPORT_UNUSED_SYMBOL*Christoph Hellwig2-38/+3
EXPORT_UNUSED_SYMBOL* is not actually used anywhere. Remove the unused functionality as we generally just remove unused code anyway. Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-02-08module: remove EXPORT_SYMBOL_GPL_FUTUREChristoph Hellwig2-13/+1
As far as I can tell this has never been used at all, and certainly not any time recently. Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14scripts/mod: disable LTO for empty.cSami Tolvanen1-0/+1
With CONFIG_LTO_CLANG, clang generates LLVM IR instead of ELF object files. As empty.o is used for probing target properties, disable LTO for it to produce an object file instead. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20201211184633.3213045-12-samitolvanen@google.com
2021-01-14modpost: lto: strip .lto from module namesSami Tolvanen3-10/+21
With LTO, everything is compiled into LLVM bitcode, so we have to link each module into native code before modpost. Kbuild uses the .lto.o suffix for these files, which also ends up in module information. This change strips the unnecessary .lto suffix from the module name. Suggested-by: Bill Wendling <morbo@google.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20201211184633.3213045-11-samitolvanen@google.com
2021-01-07fpga: dfl: add dfl bus support to MODULE_DEVICE_TABLE()Xu Yilun2-0/+17
Device Feature List (DFL) is a linked list of feature headers within the device MMIO space. It is used by FPGA to enumerate multiple sub features within it. Each feature can be uniquely identified by DFL type and feature id, which can be read out from feature headers. A dfl bus helps DFL framework modularize DFL device drivers for different sub features. The dfl bus matches its devices and drivers by DFL type and feature id. This patch adds dfl bus support to MODULE_DEVICE_TABLE() by adding info about struct dfl_device_id in devicetable-offsets.c and add a dfl entry point in file2alias.c. Acked-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/20210107043714.991646-6-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07platform/surface: aggregator: Add dedicated bus and device typeMaximilian Luz2-0/+31
The Surface Aggregator EC provides varying functionality, depending on the Surface device. To manage this functionality, we use dedicated client devices for each subsystem or virtual device of the EC. While some of these clients are described as standard devices in ACPI and the corresponding client drivers can be implemented as platform drivers in the kernel (making use of the controller API already present), many devices, especially on newer Surface models, cannot be found there. To simplify management of these devices, we introduce a new bus and client device type for the Surface Aggregator subsystem. The new device type takes care of managing the controller reference, essentially guaranteeing its validity for as long as the client device exists, thus alleviating the need to manually establish device links for that purpose in the client driver (as has to be done with the platform devices). Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201221183959.1186143-7-luzmaximilian@gmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-12-23Merge tag 'kbuild-v5.11' of ↵Linus Torvalds2-45/+43
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Use /usr/bin/env for shebang lines in scripts - Remove useless -Wnested-externs warning flag - Update documents - Refactor log handling in modpost - Stop building modules without MODULE_LICENSE() tag - Make the insane combination of 'static' and EXPORT_SYMBOL an error - Improve genksyms to handle _Static_assert() * tag 'kbuild-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Documentation/kbuild: Document platform dependency practises Documentation/kbuild: Document COMPILE_TEST dependencies genksyms: Ignore module scoped _Static_assert() modpost: turn static exports into error modpost: turn section mismatches to error from fatal() modpost: change license incompatibility to error() from fatal() modpost: turn missing MODULE_LICENSE() into error modpost: refactor error handling and clarify error/fatal difference modpost: rename merror() to error() kbuild: don't hardcode depmod path kbuild: doc: document subdir-y syntax kbuild: doc: clarify the difference between extra-y and always-y kbuild: doc: split if_changed explanation to a separate section kbuild: doc: merge 'Special Rules' and 'Custom kbuild commands' sections kbuild: doc: fix 'List directories to visit when descending' section kbuild: doc: replace arch/$(ARCH)/ with arch/$(SRCARCH)/ kbuild: doc: update the description about kbuild Makefiles Makefile.extrawarn: remove -Wnested-externs warning tweewide: Fix most Shebang lines
2020-12-21modpost: turn static exports into errorQuentin Perret1-3/+3
Using EXPORT_SYMBOL*() on static functions is fundamentally wrong. Modpost currently reports that as a warning, but clearly this is not a pattern we should allow, and all in-tree occurences should have been fixed by now. So, promote the warn() message to error() to make sure this never happens again. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Matthias Maennich <maennich@google.com> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-21modpost: turn section mismatches to error from fatal()Masahiro Yamada1-4/+4
There is code that reports static EXPORT_SYMBOL a few lines below. It is not a good idea to bail out here. I renamed sec_mismatch_fatal to sec_mismatch_warn_only (with logical inversion) to match to CONFIG_SECTION_MISMATCH_WARN_ONLY. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-21modpost: change license incompatibility to error() from fatal()Masahiro Yamada1-2/+2
Change fatal() to error() to continue running to report more possible issues. There is no difference in the fact that modpost will fail anyway. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-21modpost: turn missing MODULE_LICENSE() into errorMasahiro Yamada1-1/+1
Do not create modules with no license tag. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-21modpost: refactor error handling and clarify error/fatal differenceMasahiro Yamada2-29/+27
We have 3 log functions. fatal() is special because it lets modpost bail out immediately. The difference between warn() and error() is the only prefix parts ("WARNING:" vs "ERROR:"). In my understanding, the expected handling of error() is to propagate the return code of the function to the exit code of modpost, as check_exports() etc. already does. This is a good manner in general because we should display as many error messages as possible in a single run of modpost. What is annoying about fatal() is that it kills modpost at the first error. People would need to run Kbuild again and again until they fix all errors. But, unfortunately, people tend to do: "This case should not be allowed. Let's replace warn() with fatal()." One of the reasons is probably it is tedious to manually hoist the error code to the main() function. This commit refactors error() so any single call for it automatically makes modpost return the error code. I also added comments in modpost.h for warn(), error(), and fatal(). Please use fatal() only when you have a strong reason to do so. For example: - Memory shortage (i.e. malloc() etc. has failed) - The ELF file is broken, and there is no point to continue parsing - Something really odd has happened For general coding errors, please use error(). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Quentin Perret <qperret@google.com>
2020-12-21modpost: rename merror() to error()Masahiro Yamada2-6/+6
The log function names, warn(), merror(), fatal() are inconsistent. Commit 2a11665945d5 ("kbuild: distinguish between errors and warnings in modpost") intentionally chose merror() to avoid the conflict with the library function error(). See man page of error(3). But, we are already causing the conflict with warn() because it is also a library function. See man page of warn(3). err() would be a problem for the same reason. The common technique to work around name conflicts is to use macros. For example: /* in a header */ #define error(fmt, ...) __error(fmt, ##__VA_ARGS__) #define warn(fmt, ...) __warn(fmt, ##__VA_ARGS__) /* function definition */ void __error(const char *fmt, ...) { <our implementation> } void __warn(const char *fmt, ...) { <our implementation> } In this way, we can implement our own warn() and error(), still we can include <error.h> and <err.h> with no problem. And, commit 93c95e526a4e ("modpost: rework and consolidate logging interface") already did that. Since the log functions are all macros, we can use error() without causing "conflicting types" errors. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-04Add auxiliary bus supportDave Ertman2-0/+11
Add support for the Auxiliary Bus, auxiliary_device and auxiliary_driver. It enables drivers to create an auxiliary_device and bind an auxiliary_driver to it. The bus supports probe/remove shutdown and suspend/resume callbacks. Each auxiliary_device has a unique string based id; driver binds to an auxiliary_device based on this id through the bus. Co-developed-by: Kiran Patil <kiran.patil@intel.com> Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Co-developed-by: Fred Oh <fred.oh@linux.intel.com> Co-developed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Martin Habets <mhabets@solarflare.com> Link: https://lore.kernel.org/r/20201113161859.1775473-2-david.m.ertman@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/160695681289.505290.8978295443574440604.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-26treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches1-2/+2
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-10Merge tag 'kbuild-v5.9' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - run the checker (e.g. sparse) after the compiler - remove unneeded cc-option tests for old compiler flags - fix tar-pkg to install dtbs - introduce ccflags-remove-y and asflags-remove-y syntax - allow to trace functions in sub-directories of lib/ - introduce hostprogs-always-y and userprogs-always-y syntax - various Makefile cleanups * tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled kbuild: introduce hostprogs-always-y and userprogs-always-y kbuild: sort hostprogs before passing it to ifneq kbuild: move host .so build rules to scripts/gcc-plugins/Makefile kbuild: Replace HTTP links with HTTPS ones kbuild: trace functions in subdirectories of lib/ kbuild: introduce ccflags-remove-y and asflags-remove-y kbuild: do not export LDFLAGS_vmlinux kbuild: always create directories of targets powerpc/boot: add DTB to 'targets' kbuild: buildtar: add dtbs support kbuild: remove cc-option test of -ffreestanding kbuild: remove cc-option test of -fno-stack-protector Revert "kbuild: Create directory for target DTB" kbuild: run the checker after the compiler
2020-08-09kbuild: introduce hostprogs-always-y and userprogs-always-yMasahiro Yamada1-2/+2
To build host programs, you need to add the program names to 'hostprogs' to use the necessary build rule, but it is not enough to build them because there is no dependency. There are two types of host programs: built as the prerequisite of another (e.g. gen_crc32table in lib/Makefile), or always built when Kbuild visits the Makefile (e.g. genksyms in scripts/genksyms/Makefile). The latter is typical in Makefiles under scripts/, which contains host programs globally used during the kernel build. To build them, you need to add them to both 'hostprogs' and 'always-y'. This commit adds hostprogs-always-y as a shorthand. The same applies to user programs. net/bpfilter/Makefile builds bpfilter_umh on demand, hence always-y is unneeded. In contrast, programs under samples/ are added to both 'userprogs' and 'always-y' so they are always built when Kbuild visits the Makefiles. userprogs-always-y works as a shorthand. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2020-08-05Merge tag 'char-misc-5.9-rc1' of ↵Linus Torvalds2-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem patches for 5.9-rc1. Lots of new driver submissions in here, and cleanups and features for existing drivers. Highlights are: - habanalabs driver updates - coresight driver updates - nvmem driver updates - huge number of "W=1" build warning cleanups from Lee Jones - dyndbg updates - virtbox driver fixes and updates - soundwire driver updates - mei driver updates - phy driver updates - fpga driver updates - lots of smaller individual misc/char driver cleanups and fixes Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits) habanalabs: remove unused but set variable 'ctx_asid' nvmem: qcom-spmi-sdam: Enable multiple devices dt-bindings: nvmem: SID: add binding for A100's SID controller nvmem: update Kconfig description nvmem: qfprom: Add fuse blowing support dt-bindings: nvmem: Add properties needed for blowing fuses dt-bindings: nvmem: qfprom: Convert to yaml nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances nvmem: core: add support to auto devid nvmem: core: Add nvmem_cell_read_u8() nvmem: core: Grammar fixes for help text nvmem: sc27xx: add sc2730 efuse support nvmem: Enforce nvmem stride in the sysfs interface MAINTAINERS: Add git tree for NVMEM FRAMEWORK nvmem: sprd: Fix return value of sprd_efuse_probe() drivers: android: Fix the SPDX comment style drivers: android: Fix a variable declaration coding style issue drivers: android: Remove braces for a single statement if-else block drivers: android: Remove the use of else after return drivers: android: Fix a variable declaration coding style issue ...
2020-07-27Merge 5.8-rc7 into char-misc-nextGreg Kroah-Hartman1-2/+10
This should resolve the merge/build issues reported when trying to create linux-next. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-27modpost: explain why we can't use strsepWolfram Sang1-0/+1
Mention why we open-code strsep, so it is clear that it is intentional. Fixes: 736bb11898ef ("modpost: remove use of non-standard strsep() in HOSTCC code") Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-07modpost: remove use of non-standard strsep() in HOSTCC codeH. Nikolaus Schaller1-2/+10
strsep() is neither standard C nor POSIX and used outside the kernel code here. Using it here requires that the build host supports it out of the box which is e.g. not true for a Darwin build host and using a cross-compiler. This leads to: scripts/mod/modpost.c:145:2: warning: implicit declaration of function 'strsep' [-Wimplicit-function-declaration] return strsep(stringp, "\n"); ^ and a segfault when running MODPOST. See also: https://stackoverflow.com/a/7219504 So let's replace this by strchr() instead of using strsep(). It does not hurt kernel size or speed since this code is run on the build host. Fixes: ac5100f5432967 ("modpost: add read_text_file() and get_line() helpers") Co-developed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-30soundwire: extend SDW_SLAVE_ENTRYPierre-Louis Bossart2-1/+7
The SoundWire 1.2 specification adds new capabilities that were not present in previous version, such as the class ID. To enable support for class drivers, and well as drivers that address a specific version, all fields of the sdw_device_id structure need to be exposed. For SoundWire 1.0 and 1.1 devices, a wildcard is used so class and version information are ignored. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200608205436.2402-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-06Merge tag 'kbuild-v5.8' of ↵Linus Torvalds3-310/+212
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32 - ensure to rebuild all objects when the compiler is upgraded - exclude system headers from dependency tracking and fixdep processing - fix potential bit-size mismatch between the kernel and BPF user-mode helper - add the new syntax 'userprogs' to build user-space programs for the target architecture (the same arch as the kernel) - compile user-space sample code under samples/ for the target arch instead of the host arch - make headers_install fail if a CONFIG option is leaked to user-space - sanitize the output format of scripts/checkstack.pl - handle ARM 'push' instruction in scripts/checkstack.pl - error out before modpost if a module name conflict is found - error out when multiple directories are passed to M= because this feature is broken for a long time - add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info - a lot of cleanups of modpost - dump vmlinux symbols out into vmlinux.symvers, and reuse it in the second pass of modpost - do not run the second pass of modpost if nothing in modules is updated - install modules.builtin(.modinfo) by 'make install' as well as by 'make modules_install' because it is useful even when CONFIG_MODULES=n - add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ to allow users to use alternatives such as pigz, pbzip2, etc. * tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits) kbuild: add variables for compression tools Makefile: install modules.builtin even if CONFIG_MODULES=n mksysmap: Fix the mismatch of '.L' symbols in System.map kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS modpost: change elf_info->size to size_t modpost: remove is_vmlinux() helper modpost: strip .o from modname before calling new_module() modpost: set have_vmlinux in new_module() modpost: remove mod->skip struct member modpost: add mod->is_vmlinux struct member modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}() modpost: remove mod->is_dot_o struct member modpost: move -d option in scripts/Makefile.modpost modpost: remove -s option modpost: remove get_next_text() and make {grab,release_}file static modpost: use read_text_file() and get_line() for reading text files modpost: avoid false-positive file open error modpost: fix potential mmap'ed file overrun in get_src_version() modpost: add read_text_file() and get_line() helpers modpost: do not call get_modinfo() for vmlinux(.o) ...
2020-06-06Merge branch 'dmi-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi update from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware/dmi: Report DMI Bios & EC firmware release
2020-06-06modpost: change elf_info->size to size_tMasahiro Yamada2-6/+5
Align with the mmap / munmap APIs. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove is_vmlinux() helperMasahiro Yamada1-15/+1
Now that is_vmlinux() is called only in new_module(), we can inline the function call. modname is the basename with '.o' is stripped. No need to compare it with 'vmlinux.o'. vmlinux is always located at the current working directory. No need to strip the directory path. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: strip .o from modname before calling new_module()Masahiro Yamada2-10/+12
new_module() conditionally strips the .o because the modname has .o suffix when it is called from read_symbols(), but no .o when it is called from read_dump(). It is clearer to strip .o in read_symbols(). I also used flexible-array for mod->name. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: set have_vmlinux in new_module()Masahiro Yamada1-5/+3
Set have_vmlinux flag in a single place. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove mod->skip struct memberMasahiro Yamada2-7/+3
The meaning of 'skip' is obscure since it does not explain "what to skip". mod->skip is set when it is vmlinux or the module info came from a dump file. So, mod->skip is equivalent to (mod->is_vmlinux || mod->from_dump). For the check in write_namespace_deps_files(), mod->is_vmlinux is unneeded because the -d option is not passed in the first pass of modpost. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: add mod->is_vmlinux struct memberMasahiro Yamada2-9/+11
is_vmlinux() is called in several places to check whether the current module is vmlinux or not. It is faster and clearer to check mod->is_vmlinux flag. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}()Masahiro Yamada1-12/+8
check_exports() is never called for vmlinux because mod->skip is set for vmlinux. Hence, check_for_gpl_usage() and check_for_unused() are not called for vmlinux, either. is_vmlinux() is always false here. Remove the is_vmlinux() calls, and hard-code the ".ko" suffix. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove mod->is_dot_o struct memberMasahiro Yamada2-13/+2
Previously, there were two cases where mod->is_dot_o is unset: [1] the executable 'vmlinux' in the second pass of modpost [2] modules loaded by read_dump() I think [1] was intended usage to distinguish 'vmlinux.o' and 'vmlinux'. Now that modpost does not parse the executable 'vmlinux', this case does not happen. [2] is obscure, maybe a bug. Module.symver stores module paths without extension. So, none of modules loaded by read_dump() has the .o suffix, and new_module() unsets ->is_dot_o. Anyway, it is not a big deal because handle_symbol() is not called for the case. To sum up, all the parsed ELF files are .o files. mod->is_dot_o is unneeded. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove -s optionMasahiro Yamada1-8/+2
The -s option was added by commit 8d8d8289df65 ("kbuild: do not do section mismatch checks on vmlinux in 2nd pass"). Now that the second pass does not parse vmlinux, this option is unneeded. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove get_next_text() and make {grab,release_}file staticMasahiro Yamada2-39/+2
get_next_line() is no longer used. Remove. grab_file() and release_file() are only used in modpost.c. Make them static. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: use read_text_file() and get_line() for reading text filesMasahiro Yamada2-17/+14
grab_file() mmaps a file, but it is not so efficient here because get_next_line() copies every line to the temporary buffer anyway. read_text_file() and get_line() are simpler. get_line() exploits the library function strchr(). Going forward, the missing *.symvers or *.cmd is a fatal error. This should not happen because scripts/Makefile.modpost guards the -i option files with $(wildcard $(input-symdump)). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: avoid false-positive file open errorMasahiro Yamada1-4/+3
One problem of grab_file() is that it cannot distinguish the following two cases: - It cannot read the file (the file does not exist, or read permission is not set) - It can read the file, but the file size is zero This is because grab_file() calls mmap(), which requires the mapped length is greater than 0. Hence, grab_file() fails for both cases. If an empty header file were included for checksum calculation, the following warning would be printed: WARNING: modpost: could not open ...: Invalid argument An empty file is a valid source file, so it should not fail. Use read_text_file() instead. It can read a zero-length file. Then, parse_file() will succeed with doing nothing. Going forward, the first case (it cannot read the file) is a fatal error. If the source file from which an object was compiled is missing, something went wrong. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: fix potential mmap'ed file overrun in get_src_version()Masahiro Yamada1-17/+11
I do not know how reliably this function works, but it looks dangerous to me. strchr(sources, '\n'); ... continues searching until it finds '\n' or it reaches the '\0' terminator. In other words, 'sources' should be a null-terminated string. However, grab_file() just mmaps a file, so 'sources' is not terminated with null byte. If the file does not contain '\n' at all, strchr() will go beyond the mmap'ed memory. Use read_text_file(), which loads the file content into a malloc'ed buffer, appending null byte. Here we are interested only in the first line of *.mod files. Use get_line() helper to get the first line. This also makes missing *.mod file a fatal error. Commit 4be40e22233c ("kbuild: do not emit src version warning for non-modules") ignored missing *.mod files. I do not fully understand what that commit addressed, but commit 91341d4b2c19 ("kbuild: introduce new option to enhance section mismatch analysis") introduced partial section checks by using modpost. built-in.o was parsed by modpost. Even modules had a problem because *.mod files were created after the modpost check. Commit b7dca6dd1e59 ("kbuild: create *.mod with full directory path and remove MODVERDIR") stopped doing that. Now that modpost is only invoked after the directory descend, *.mod files should always exist at the modpost stage. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: add read_text_file() and get_line() helpersMasahiro Yamada2-0/+51
modpost uses grab_file() to open a file, but it is not suitable for a text file because the mmap'ed file is not terminated by null byte. Actually, I see some issues for the use of grab_file(). The new helper, read_text_file() loads the whole file content into a malloc'ed buffer, and appends a null byte. Then, get_line() reads each line. To handle text files, I intend to replace as follows: grab_file() -> read_text_file() get_new_line() -> get_line() Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: do not call get_modinfo() for vmlinux(.o)Masahiro Yamada1-21/+24
The three calls of get_modinfo() ("license", "import_ns", "version") always return NULL for vmlinux(.o) because the built-in module info is prefixed with __MODULE_INFO_PREFIX. It is harmless to call get_modinfo(), but there is no point to search for what apparently does not exist. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: drop RCS/CVS $Revision handling in MODULE_VERSION()Masahiro Yamada3-73/+0
As far as I understood, this code gets rid of '$Revision$' or '$Revision:' of CVS, RCS or whatever in MODULE_VERSION() tags. Remove the primeval code. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: show warning if vmlinux is not found when processing modulesMasahiro Yamada1-2/+7
check_exports() does not print warnings about unresolved symbols if vmlinux is missing because there would be too many. This situation happens when you do 'make modules' from the clean tree, or compile external modules against a kernel tree that has not been completely built. It is dangerous to not check unresolved symbols because you might be building useless modules. At least it should be warned. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: invoke modpost only when input files are updatedMasahiro Yamada1-11/+21
Currently, the second pass of modpost is always invoked when you run 'make' or 'make modules' even if none of modules is changed. Use if_changed to invoke it only when it is necessary. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: re-add -e to set external_module flagMasahiro Yamada1-2/+4
Previously, the -i option had two functions; load a symbol dump file, and set the external_module flag. I want to assign a dedicate option for each of them. Going forward, the -i is used to load a symbol dump file, and the -e to set the external_module flag. With this, we will be able to use -i for loading in-kernel symbols. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: rename ext_sym_list to dump_listMasahiro Yamada1-13/+14
The -i option is used to include Modules.symver as well as files from $(KBUILD_EXTRA_SYMBOLS). Make the struct and variable names more generic. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: allow to pass -i option multiple times to remove -e optionMasahiro Yamada1-8/+1
Now that there is no difference between -i and -e, they can be unified. Make modpost accept the -i option multiple times, then remove -e. I will reuse -e for a different purpose. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: track if the symbol origin is a dump file or ELF objectMasahiro Yamada2-10/+6
The meaning of sym->kernel is obscure; it is set for in-kernel symbols loaded from Modules.symvers. This happens only when we are building external modules, and it is used to determine whether to dump symbols to $(KBUILD_EXTMOD)/Modules.symvers It is clearer to remember whether the symbol or module came from a dump file or ELF object. This changes the KBUILD_EXTRA_SYMBOLS behavior. Previously, symbols loaded from KBUILD_EXTRA_SYMBOLS are accumulated into the current $(KBUILD_EXTMOD)/Modules.symvers Going forward, they will be only used to check symbol references, but not dumped into the current $(KBUILD_EXTMOD)/Modules.symvers. I believe this makes more sense. sym->vmlinux will have no user. Remove it too. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06firmware/dmi: Report DMI Bios & EC firmware releaseErwan Velu1-0/+2
Some vendors like HPe or Dell, encode the release version of their BIOS in the "System BIOS {Major|Minor} Release" fields of Type 0. This information is used to know which bios release actually runs. It could be used for some quirks, debugging sessions or inventory tasks. A typical output for a Dell system running the 65.27 bios is : [root@t1700 ~]# cat /sys/devices/virtual/dmi/id/bios_release 65.27 [root@t1700 ~]# Servers that have a BMC encode the release version of their firmware in the "Embedded Controller Firmware {Major|Minor} Release" fields of Type 0. This information is used to know which BMC release actually runs. It could be used for some quirks, debugging sessions or inventory tasks. A typical output for a Dell system running the 3.75 bmc release is : [root@t1700 ~]# cat /sys/devices/virtual/dmi/id/ec_firmware_release 3.75 [root@t1700 ~]# Signed-off-by: Erwan Velu <e.velu@criteo.com> Signed-off-by: Jean Delvare <jdelvare@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 13:19:22 +0300